ORION ELECTRIC M2A3A DVD/VCR User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	178742
Application ID	lScTBVZ2kVESb43bqePsuQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	93.28kB (1166051 bits)
Date Submitted	2001-11-11 00:00:00
Date Available	2001-11-11 00:00:00
Creation Date	2001-10-31 13:24:52
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2001-10-31 13:29:12
Document Title	Manual

¤
For model:
HR-XVC1U
DVD/VIDEO CASSETTE RECORDER
USER’S GUIDE
TV
DVD MENU
DISPLAY
VCR
DVD
POWER
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
ZOOM
TV
POWER
INPUT
TV VOL
TIMER
TV/VCR
PLAY
FF
REW
STOP
PAUSE
REC
SKIP
/INDEX
SET
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
TV/VC CH —
OSD
SLOW
A.MONITOR
SKIP
SEARCH
VCR/DVD/TV
IMPORTANT NOTE TO THE CUSTOMER:
In the space below, enter the serial number for your
television (located on the rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this guide.
Keep this user's guide in a convenient place for future reference.
Keep the carton and original packaging for future use.
Serial Number
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with
the FCC Rules could void the user's authority to operate this equipment.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND
RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT A JVC
AUTHORIZED SERVICE CENTER.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO
BEAM.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
DVD OUTPUT
DIGITAL AUDIO
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
OPTICAL
COAXIAL
AUDIO
S-VIDEO COMPONENT
VIDEO
PB/CB
AUDIO
PR/CR
IN
( ANT. )
OUT
( TV )
CH.
Important safeguards
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3126A
and to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped
with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Important safeguards
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits, as
contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f . When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
23. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
24. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
Important safeguards / Power Source
28. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.
29. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
30. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a
warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be
impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make
sure that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner.
In such cases, change the location of the player.
Power Source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
NOTES:
• Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
Features
VCR/DVD/CD Player
• VCR With DVD/CD player - Unique space saving design combines a Hi-Fi Video cassette recorder and a DVD/CD
player. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher
than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back video CDs and audio CDs.
• High Quality Picture - More than 500 lines(VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS
(400 lines) or Laser Disc (430 lines) in resolution.
VCR Section
• Stereo/SAP Reception - This VCR is designed to receive stereo and separate audio program (SAP) broadcasts
where available.
• SQPB - Tapes recorded in the S-VHS system can be played back simply on this VCR.
• 4 Video Heads - Provides optimal picture quality for special effects playback.
• 19µm HEAD - For superior picture quality even in EP mode, 19micron width technology heils to avoid crosstalk and
boost EP picture quality to near SP levels. With procision technology, ghosts and color beats are virtually eliminated.
• Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this
VCR provides a level of excellence that rivals compact discs.
• Instant Timer Recording (ITR) - Simply by pressing the REC and PLAY buttons, the VCR can be programmed for
up to 5 hours of recording with an immediate start.
• Skip Search - When the SKIP SEARCH button is pressed during playback, the VCR will automatically search
forward in 30 second increments to a maximum of 3 minutes with each press of the SKIP SEARCH button, and then
return to normal playback.
DVD Section
• Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Optical or Coaxial):
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect
of being in a movie theater or a concert hall.
• Surround standard different from Dolby Digital. This format is already in use in many theaters. By connecting this
unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this
format can be enjoyed. However, audio will not be output from the analog audio output jacks.
• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded in
this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/20 bit exceeds audio CD sound.
• Surround audio - This DVD equipped with a “Spatializer 3D surround system”. It can produce the effect of being in a
cinema or a concert hall.
• Multi-Language - Since this DVD matches with 124 language-subtitles/-soundtracks, you can enjoy selecting a
favorite one. (You can not select the language that is not recorded on the disc.)
• Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you
can change the angles during playback. (If a Multi-Angle is not recorded on the disc, you can not change the angle.)
• Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
• Program/Random Playback (Audio CD) - You can play back tracks in programmed or random-selected sequences.
• Zoom (DVD only) - You can zoom in on the selected subject on the screen during playback.
• Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.
• Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level
rating.
* This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation or other rights owners and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation or other rights owners.
Reverse engineering or disassembly is prohibited.
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
* Certain audio features of this product manufactured under license from Desper Products,Inc. Spatializer and the circle
- in - square device are trademarks owned by Desper Products,Inc.
* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
Contents
Before using your unit
IMPORTANT SAFEGUARDS .............................................. 3
Power source ....................................................................... 5
Features ............................................................................... 6
Contents ............................................................................... 7
Parts and functions .............................................................. 8
Remote control ..................................................................... 9
Antenna connections .......................................................... 11
Cable TV connections ........................................................ 12
TV operation
Contents
has not
fixed yet!
Setting the language .......................................................... 13
TV operation ....................................................................... 14
Closed caption ................................................................... 16
To memorize channels ....................................................... 17
Setting the V-Chip .............................................................. 19
Picture control adjustment .................................................. 22
Stereo and separate audio program (SAP) ........................ 23
Sound control adjustment .................................................. 24
Playback operation
Disc .................................................................................... 25
Setting setup language ...................................................... 26
Playback procedure ........................................................... 27
Special playback ................................................................ 28
Advanced Function
Zooming ............................................................................. 29
Repeat playback ................................................................. 30
Program playback/Random playback (Audio CD) .............. 31
Changing soundtrack language ......................................... 32
Subtitles ............................................................................. 33
Changing angles/Title selection/DVD menu ....................... 34
Additional Information
Parental control setting ...................................................... 35
To change the parental level .............................................. 36
Temporary disabling of rating level by DVD disc ................ 37
Setting the aspect ratio of TV screen ................................. 38
Setting on screen display/Status display of Disc ................ 39
Setting menu language ...................................................... 40
Setting subtitle language .................................................... 41
Setting audio soundtrack language .................................... 42
Language code list ............................................................. 43
Connection to other equipments ........................................ 44
Problems and troubleshooting ............................................. 46
Reception disturbances ...................................................... 48
Specifications ..................................................................... 49
Appendix (Remote programming) ...................................... 50
Parts and functions
Front
VCR/DVD select button
PLAY button
Cassette Loading Slot
OPEN/CLOSE button
STOP button
Disc tray
EJECT button
PLAY STOP
POWER
VIDEO (M) L - AUDIO - R
VCR
EJECT
CH
OPEN/CLOSE
REW
FF
REC
DVD
VCR/DVD
Remote sensor
POWER
button
CHANNEL +/– buttons
AUDIO (L/R)/
VIDEO IN jacks
DVD lamp
REC button
REW (Rewind) button
VCR lamp
FF (Fast Forward) button
Rear
AC power cord
DVD OUTPUT
DIGITAL AUDIO
OPTICAL
COAXIAL
AUDIO
S-VIDEO COMPONENT
IN
VIDEO
( ANT. )
PB/CB
AUDIO
OUT
PR/CR
RF IN jack
DVD OPTICAL
DIGITAL AUDIO
OUT jack
DVD COAXIAL DIGITAL
AUDIO OUT jack
DVD AUDIO (L/R) OUT jacks
DVD S-VIDEO OUT jack
( TV )
RF OUT jack
CH.
3/4 Channel Selector Switch
DVD/VCR common AUDIO (L/R)/VIDEO OUT
jacks
DVD COMPONENT OUT jacks
Display
11
10
No.
Display
VCR
Description
VCR mode
Playback (lights) / Auto resume (flashes)
Still picture
DVD
DVD disc is inserted.
CD
Audio CD is inserted.
PM
Display for afternoon (lights out in the morning)
10 : 00
Clock display (colon[ : ] flashes)
01 : 00
Counter display by hour/minute at VCR/DVD / by minute/second at CD
Track number display for CD
CH2
TV channel display for VCR
c36
CATV channel display
External input display
Timer recording display
Video tape is in the unit
10
TRK
Track display for CD
11
REC
Normal recording display (flashes during Instant Timer Recording - ITR)
Explanation for On-Screen-Symbol:
Playback
Skip chapter to reverse
Parental level locked
Stop
direction
Parental level unlocked
Still picture
Open or Close the tray
Screen size: Normal TV
Frame advanced playback
Auto resume
Screen size: PAN SCAN
Forward slowmotion
Direction button’s mark
Screen size: WIDE
Backward slowmotion
A B A-B repeat
Fast Forward playback
Subtitle language
Review playback
Soundtrack language
Skip chapter to forward
Angle
direction
Zoom
Shows Prohibited act
Output sound for Video-CD
Note:
Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.
Remote control
Page
TV
VCR
DVD
POWER
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV/VCR/DVD switch
POWER
DVD MENU
MARKER
RETURN
OPEN/CLOSE
DISPLAY
A.TRK
SUBTITLE
COUNTER RESET
ANGLE
ZERO RETURN
TV
POWER
INPUT
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
TIMER
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
VCR/DVD/TV
JVC TV Remote Control
This Remote can control some functions
(TV POWER, NUMBER(0-9), INPUT, TV
VOL +/–, TV CH +/– and ENTER) of a
remote controllable JVC TV by slide TV/
VCR/DVD switch to TV.
NOTE:
• It’s not possible to operate a unit not
equipped with a remote sensor.
• This Remote can control a JVC TV only.
• When you operate the VCR or DVD, the
TV/VCR/DVD switch must be slided to
VCR/DVD again. Otherwise the VCR/
DVD may not operate properly.
10
SEARCH MODE
SP/EP
PLAY MODE
ZOOM
TITLE
REPEAT A-B
0-9
TV/VCR
TV POWER
INPUT
TV VOL +/–
REW
PLAY
FF
REC
STOP
PAUSE
SKIP /
INDEX /
TV/VCR CH +/–
SET –/+
ENTER
SELECT
SET UP MENU
CANCEL
OSD
A.MONITOR
SLOW
SKIP SEARCH
Switch to operate TV or VCR or DVD 10,50
Power on/off
13,14
Display menu of DVD software
34
Index
34
Remove DVD set up menu
35-42
Open the tray/ Close the tray
27
Call information of DVD section
15
Digital AUTO TRACKING
33
Set Subtitle
33
Reset the counter to 00:00
33
Change playback angle
33
Stop the tape when the counter reaches
00:00
33
Locating desired scene
33
Sets the tape speed for recording
33
Select playback mode
33
Zoom
29
Select title
34
Repeat playback between A and B
30
Direct channel selection of TV
14,18
Input setting
31
Enter a passward
19,21,35-37
Set the unit to start recording at a preset
time.
30
Switches between TV and VCR
30
Turn the connected TV on or off
30
Switch between TV channel/LINE
45
Adjust the connected TV’s volume
30
Tape rewind/Review playback
30
Playback
27,28,31,34
Tape Fast forward/Fast Forward playback 30
Recording
30
Stop
27
Still picture/Recording pause on/off
27
Skip chapter to forward or reverse direction 33
Search for the INDEX mark.
33
Select channel of TV or VCR
33
Cursor buttons
33
Setting buttons
33
Cursor buttons
33
Enter information in the menu 13,19,21,26,
Select option in the menu
27,29-31,34-42
Display menu of DVD setup 27,29-31,34-42
Delete Timer program
27
Reset information in the menu
27
Call information of VCR section
27
Switches sound between mono, stereo and SAP 27
Change sound track language of DVD
27
Slowmotion playback
Skip the unwanted short material of tape 2
Remote control
Inserting Batteries
Slide the battery compartment
cover in the direction of the
arrow.
two "AA" batteries
2 Install
(supplied), paying attention to
Replace the compartment
cover.
the polarity diagram in the
battery compartment.
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
REMOTE CONTROL BASICS
• Before you can operate the remote control, you must first install the batteries (included). See “Inserting
Batteries” on this page above for instructions.
• Press POWER to turn the DVD/VCR on or off.
• Make sure TV/VCR/DVD switch is set to VCR/DVD.
• Press VCR CH + and VCR CH – to scan through the channels. Tap VCR CH + or VCR CH – to move through
the channels one channel at a time.
• The VCR CH +/– and SET +/– are also used to navigate JVC’s onscreen menu system.
• You can directly access specific channels using Number keys pad.
• Each press of VCR or DVD on the remote control, switches the screen between the VCR screen (VCR mode)
and the DVD screen (DVD mode). You can operate a VCR and SETUP menu in the VCR mode, and a DVD
and SETUP menu in the DVD mode.
Operation
• Aim the remote control at the remote sensor and
press control buttons to operate.
• Operate the remote control within 30° angle on
either side of the remote sensor, up to a distance of Approx. 5 meters.
Approx. 5 meters
11
Basic connections
If you are using an antenna system, follow the instructions. If you are a cable (CATV) subscriber,skip ahead
to page 14 for the proper connections.
ANTENNA TO DVD/VCR CONNECTION
The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV
and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting
an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection
diagram.
Combination VHF/UHF Antenna with 75 ohm Coaxial Cable
DVD/VCR
IN
75 ohm Coaxial Cable
OUT
Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire
DVD/VCR
Matching Transformer
300 ohm Input
75 ohm output
(not supplied)
IN
OUT
300 ohm Twin Lead (Flat) Wire
DVD/VCR
Separate VHF and UHF Antennas
VHF
Combiner
75/300 ohm Inputs
75 ohm output
(not supplied)
UHF
IN
300 ohm Twin Lead (Flat) Wire
OUT
75 ohm Coaxial Cable
NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300
ohm inputs and one 75 ohm output.
NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the
antenna to the DVD/VCR properly.
• For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of
an outdoor type antenna is required.
• If you are not sure about the connection, please refer to qualified service personnel.
12
Basic connections
DVD/VCR TO TV CONNECTION
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
TV
VHF/UHF IN
NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
menu option to the "TV"
mode.
75 ohm Coaxial Cable (supplied)
TV with single 75 ohm VHF/UHF
antenna input
TV
75 ohm Coaxial Cable
(supplied)
Splitter
75 ohm Input
75/300 ohm outputs
(not supplied)
UHF
VHF
NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
menu option to the "TV"
mode.
TV with 300 ohm UHFand 75 ohm VHF
antenna inputs
TV
UHF
75 ohm Coaxial Cable
(supplied)
Splitter
75 ohm Input
300 ohm outputs
(not supplied)
NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
menu option to the "TV"
mode.
VHF
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
13
CATV (CABLE TV) connections
Many cable companies offer services permitting reception of extra channels including pay or subscription channels.
This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable
company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to
a special channel which is scrambled, you must have a descrambler box for proper reception.
DVD/VCR
TV
UHF/VHF
IN
Incoming Cable
VHF/UHF
IN (ANT)
OUT
ALLOWS: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
DVD/VCR
Converter/
Descrambler
TV
UHF/VHF
IN
Incoming
Cable
VHF/UHF
IN (ANT)
OUT
ALLOWS: * Recording of channels through the converter box
(scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter box.
PREVENTS: * Recording one channel while watching another.
* Using the DVD/VCR tuner to select channels.
NOTE:
To record from converter/descrambler,
DVD/VCR tuner must be tuned to the
converter output channel, usually
channel 3 or 4.
DVD/VCR
TV
UHF/VHF
IN
Incoming Cable
Converter/Descrambler
VHF/UHF
IN (ANT)
OUT
ALLOWS: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording an unscrambled channel while watching
any channel selected at the converter box.
PREVENTS: Recording scrambled channels.
NOTE:
If you are playing a tape or using the
tuner built into the DVD/VCR, the
converter must be set to the video
channel output of the DVD/VCR (either
3 or 4).
NOTE: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR
to the output of the Converter/Descrambler box, usually channel 3 or 4.
14
CATV (CABLE TV) connections
IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.
This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled
programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult
your local cable company for more information concerning connection to their descrambler equipment. There are many
ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
DVD/VCR
TV
Splitter
UHF/VHF
IN
Incoming
Cable
ALLOWS: *
PREVENTS: *
Converter/Descrambler
OUT
A/B Switch
VHF/UHF
IN (ANT)
Recording of one channel while watching another.
Using the programmable timer to record only the channel selected at the converter box.
Recording of all channels through the converter box.
Watching scrambled channels while recording another channel.
Using the DVD/VCR tuner to select channels.
DVD/VCR
TV
Splitter
UHF/VHF
IN
Converter/
Descrambler
Incoming
Cable
OUT
A/B Switch
VHF/UHF
IN (ANT)
ALLOWS: *
PREVENTS:
Recording of nonscrambled channels.
Recording of one channel while watching another.
Watching premium channels through the converter while recording nonscrambled channels.
Using the programmable timer.
Recording scrambled channels.
DVD/VCR
Splitter
Converter/
Descrambler
TV
UHF/VHF
IN
Incoming
Cable
Converter/
Descrambler
OUT
VHF/UHF
IN (ANT)
A/B Switch
ALLOWS: * Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching another (scrambled or
unscrambled) channel.
* Using the programmable timer to record only the channel selected at the converter box.
PREVENTS: Using the DVD/VCR tuner to select channels.
15
Playback Connection
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for the
location of video and audio inputs and outputs.
Connect to a TV with Audio/Video Output
You need an AUDIO/VIDEO Cord for connection.
TV
Audio (L) Output Video Output
DVD/VCR
DVD OUTPUT
DIGITAL AUDIO
OPTICAL
AUDIO
COAXIAL
S-VIDEO COMPONENT
VIDEO
PB/CB
AUDIO
PR/CR
IN
( ANT. )
OUT
( TV )
CH.
To Video
Input
Audio (R) Output
To Audio (R) Input
To Audio (L) Input
AUDIO/VIDEO Cord (supplied)
Connect to a TV with S-Video Output
TV
S-Video Cord (not supplied)
DVD/VCR
DVD OUTPUT
DIGITAL AUDIO
OPTICAL
COAXIAL
AUDIO
S-VIDEO COMPONENT
IN
VIDEO
( ANT. )
PB/CB
AUDIO
OUT
PR/CR
( TV )
CH.
To S-Video Output
To S-Video Input
To Audio (R) Input
Audio (L) Output
Audio (R) Output
To Audio (L) Input
AUDIO Cord (not supplied)
Connect to a BS TUNER
Antenna
Satellite
Antenna
TV
75 ohm Coaxial Cable (not supplied)
ANT. Input
To ANT. Input
DVD/VCR
BS Tuner
DVD OUTPUT
DIGITAL AUDIO
OPTICAL
COAXIAL
AUDIO
S-VIDEO COMPONENT
IN
VIDEO
( ANT. )
PB/CB
AUDIO
OUT
PR/CR
( TV )
CH.
ANT. output
ANT.
Output
To Video Input
To Audio (L) Input
75 ohm Coaxial
Cable (supplied)
To Audio (R) Input
AUDIO/VIDEO Cord (supplied)
16
To ANT.
Input
Playback Connection
Connect to a Stereo Amplifier with Audio Output
NOTE: If your TV has COMPONENT VIDEO IN jack, you can connect the DVD/VCR to the TV with a COMPONENT
cable (not supplied) as shown below. COMPONENT VIDEO output jack can send high-quality video signal to a TV
than S-Video Input.
VIDEO Cord (not supplied)
To Video
Input
Audio (R) Output
DVD
Amplifier
OUTPUT
FRONT SURROUND
CENTER
SCART Æ PRISE PERITEL
SUB WOOFER
TV-RGB-Composite
DIGITAL AUDIO VIDEO
AUDIO
A/V-IN
Audio (L)
Output
Video Output To Audio (R) Input
TV
To Audio (L) Input
AUDIO Cord (not supplied)
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output.
Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
• AV amplifier with built-in *DTS decoder
S-Video cord (not supplied)
DVD/VCR
To S-Video Input
OUTPUT Æ SORTIE Æ AUSGANG
SCART Æ PRISE PERITEL
DIGITAL
AUDIO
AUDIO
TV
VIDEO
R (D)
A/V-RGB-Composite
(G)
Coaxial digital cable (not supplied)
Optical digital cable (not supplied)
AV Amplifier with builtin various decoder as
above
NOTE:
You may connect to a TV
with a Component video
cable(not supplied) or SVideo cable(not supplied)
instead of a video cable(not
supplied).
Connecting the optical digital cable
You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital
cable.
• When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear of DVD.
• When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTE:
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.
• Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input
connector) which does not contain a Dolby Digital, DTS or MPEG decoder. Otherwise, any attempt to play DVDs
may cause such a high level of noise that it may be harmful to your ears and damage your speakers.
• DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is
necessary.
• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
17
Setting the Video Channel / Setting the language
Setting the Video Channel
When a TV is connected with the 75 ohm coaxial cable only.
To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
To turn on the VCR/DVD, at first slide TV/VCR/DVD switch to
1 VCR/DVD.
Then press POWER to turn on the VCR/DVD.
VCR to select the VCR mode. The VCR indicator will
2 Press
light.
the 3/4 Channel selector switch (Rear of the VCR) to CH 3
3 Set
or 4.
ON the TV and set to CH 3 or 4 to correspond with the
4 Turn
channel selected in step 3.
TV/VCR to select the VCR position.
5 Press
The TV/VCR indicator will light.
any channel to receive a TV station in your area.
6 Select
The channel number will appear on the screen for about
TV
VCR
DVD
POWER
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
INPUT
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
TV VOL
TIMER
PLAY
REW
REC
SKIP
/INDEX
SET
Setting the language
TV/VCR
FF
STOP
PAUS
TV/VCR CH +
ENTER/
SELECT
SET UP
MENU
SKIP
/INDEX
SET
SETUP MENU,
1 Press
If you use the unit for the first time
and press SETUP MENU, instead
of the main menu screen on the
right the SYSTEM SET UP menu
screen in step 2 may appear.
CANCEL
T V/V C R C H —
OSD
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
SLOW
A.MONITOR
SKIPCH
SEAR
18
/MENU
or
to select the
2 Press
“LANGUAGE” option, then press
ENTER.
NOTE:
• If the unit does not operate properly,
or No key operation (by the unit
and/or the remote control): Static
electricity, etc., may affect the player's
operation. Disconnect the AC power
cord once, then connect it again.
• If there is no pressing of any buttons
for more than 60 seconds, then the
VCR switch back to TV-operation
automatically.
• The VCR section has its own menu
and also DVD section has its own
menu (see page 26).
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/MENU
Press
or
to select the
3 desired
language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/MENU
4 Press SETUP MENU until the MENU screen is cleared.
Auto clock setting
The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone
and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel
signal.
Preparation:
You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.
TV
VCR
DVD
POWER
Auto clock setting
WAIT 30 MINUTES! when the power switch is off, after the
connections of the antenna and the power plug. Because the Auto
Clock setting feature is activate.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press POWER to turn on the VCR/DVD after the Auto Clock operation
completed.
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
• When shipped from factory, the AUTO CLOCK option is set to ON position.
• If you turn the VCR/DVD on during Auto Clock setting, the clock is not set.
• With cable box connection, if the Auto Clock Setting is unsuccessful,
please select the PBS channel carrying the XDS information, then
turn the VCR/DVD off. After 30 minutes, turn the VCR/DVD on, and
if the clock is not set automatically, set the clock manually. (See page 17)
Canadian Viewers:
Please see note regarding the AUTO CLOCK SETTING option on page 58.
INPUT
Time Zone setting (STANDARD TIME)
TV VOL
TIMER
TV/VCR
PLAY
REW
In the rare event that you live within broadcast range of two
stations in two different time zones, the VCR/DVD may recognize
the wrong station for the AUTO CLOCK set. To correct the
situation:
FF
Preparation:
REC
SKIP
/INDEX
SET
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
• Turn ON the TV.
• When a TV is connected with an audio/video cable, select the video
input mode on the TV.
• When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
• Make sure the VCR mode has been selected. (Is the VCR indicator
being light?) (see step 1~2 on page 16)
SETUP MENU. The VCR menu screen will appear.
1 Press
or
to select the SYSTEM SET UP menu, then
Press
press ENTER.
or
to select the
2 Press
“STANDARD TIME” option, then
VCR/DVD/TV
press ENTER.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
NOTE:
• After Auto Clock setting, in some case
the clock may display the other time
zone’s. You can correct the clock by
selecting your Time Zone setting
above.
• When the clock is not set or you set
the clock manually, Time Zone setting
is not available.
/MENU
or
to select your
3 Press
Time Zone, then press the
ENTER.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/MENU
4 Press SETUP MENU until the MENU screen is cleared.
19
Auto clock setting
Daylight saving time setting
You can set the Daylight saving
time automatically or manually.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV.
• When a TV is connected with an audio/video cable, select the
video input mode on the TV.
• When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
the steps 1~2 on page
1 Repeat
17 and select DAYLIGHT
SAVING TIME, then press
ENTER.
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/MENU
SP/EP
PLAY
MODE
TV
POWER
or
to select one of
2 Press
the options, then press ENTER.
INPUT
for manual setting
(forward one hour)
OFF: for manual setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
ON:
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
CANCEL
SLOW
A.MONITOR
VCR/DVD/TV
20
/MENU
When you want to set the Daylight Saving Time manually, on
the first Sunday in April you set to “ON”, and on the last
Sunday in October you set to “OFF”.
SET
T V/V C R C H —
OSD
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
SKIPCH
SEAR
NOTES:
• When shipped from factory, the DAYLIGHT SAVING TIME
option is set to AUTO position.
• When the clock is not set, Daylight Saving Time setting is not
available.
• When there is no Daylight Saving Time in your area, always
select OFF position in step 2.
Manual clock setting
You must set the date and time
manually for timer recordings.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
1 Press SETUP MENU. The VCR menu screen will appear.
or
to select the
2 Press
SYSTEM SET UP menu, then
press ENTER.
MAIN MENU
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
or
to select the
3 Press
“CLOCK SET” option, then press
ENTER.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
INPUT
/MENU
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
T V/V C R
OSD
or
to set the month,
4 Press
then press ENTER button.
/MENU
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change
or .
blinks, then press
CH —
SLOW
A.MONITOR
SKIPCH
SEAR
the day, year and time as in
5 Set
step 4.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
VCR/DVD/TV
NOTE:
After a power failure or disconnection
of the power, the timer settings will be
lost. In this case, reset the present time.
setting the clock, date and
6 After
time starts functioning
/MENU
8 : 30 AM MON
automatically.
21
Tuner Setting
This VCR is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must
be programmed into the VCR’s memory. In addition to normal VHF and UHF channels, this VCR can
receive up to 113 Cable TV channels. To use this VCR with an antenna, set the TV/CATV menu option to
the TV mode. When shipped from the factory, this menu option is in the CATV mode.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
TV/CATV Selection
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
the steps 1~2 on page 19 and select CH SET UP,
1 Repeat
then press ENTER.
or
2 Press
CATV” option.
to select the “TV/
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
TV
POWER
=4F216
INPUT
TV VOL
TIMER
TV/VCR
REC
SKIP
/INDEX
SET
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
/MENU
TV
- VHF/UHF channels
CATV - CABLE TV channels
/MENU
4 Press SETUP MENU until the menu screen is cleared.
SET
CANCEL
T V/V C R C H —
OSD
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
FF
STOP
press ENTER to select the
3 Then
TV or CATV mode. The arrow
indicates the selected mode.
PLAY
REW
SLOW
A.MONITOR
VCR/DVD/TV
SKIPCH
SEAR
Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
Repeat above steps 1~2 and
1 select
AUTO CH MEMORY, then
press ENTER.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
/MENU
press ENTER.
2 Then
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
22
/MENU
To ADD/DELETE channels / Noise elimination
To ADD/DELETE channels
You can add the channels you want
or delete the channels you do not
want manually.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
Repeat the steps 1~2 on page 19
1 and
select CH SET UP, then press
ENTER. Then press
or
to
select the “ADD/DELETE” option.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
TV
POWER
/MENU
2 To Add or Delete desired channels
SP/EP
PLAY
MODE
INPUT
Press Number keys or /
to select a channel number
you want to add or delete.
To add channels
Press ENTER until “ADD”
appears on the screen to set
to add the unmemorized
channel.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/MENU
TV VOL
TIMER
TV/VCR
REW
REC
To delete channels
Press ENTER until “DELETE” appears on the screen to
set to delete the channel from memory. The channel
number will blink.
PLAY
FF
STOP
PAUS
SKIP
/INDEX
SET
TV/VCR CH +
Repeat 1 to 2
to add or delete other channel.
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
3 Press SETUP MENU until the menu screen is cleared.
SET
CANCEL
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
Noise elimination
You can add the channels you want or delete the channels
you do not want manually.
VCR/DVD/TV
the steps 1~3 on page 19 and select NO NOISE
1 Repeat
BACKGROUND, then press ENTER.
ENTER to select the ON
2 Press
position.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
/MENU
3 Press SETUP MENU until the menu screen is cleared.
23
Loading and Unloading a Cassette Tape
Use only video cassette tapes marked
and
Loading
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
Press EJECT on the unit. When a tape is
being played press this button twice.
Remove the cassette tape.
Automatic tape eject
When the VCR is automatically rewinding the tape and reaches its beginning, the cassette tape will be ejected
automatically
To prevent accidental erasure
To record again
Remove the erase prevention tab with a screwdriver.
Cover the hole with a piece of adhesive tape.
Screwdriver
Erase prevention tab
Adhesive tape
Tape speed and maximum recording time
Tape Speed
Video cassette tape
T-160
T-120
T-90
T-60
T-30
SP (Standard Play)
2-2/3 hours
2 hours
1-1/2 hours
1 hour
30 minutes
EP (Extended Play)
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
24
Cassette tape Playback
You can add the channels you want
or delete the channels you do not
want manually.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
a prerecorded tape
1 Load
(When loading a cassette tape
without the erase prevention
tab, playback will start automatically).
start playback
2 To
Press PLAY.
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
Playback will start.
" will appear on the screen
for about 4 seconds.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
/MENU
TV
POWER
INPUT
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
To stop playback
Press STOP once.
The tape will stop but remain
fully loaded and ready to play.
" " will appear on the screen
for about 4 seconds.
FF
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
/MENU
To rewind the tape or forward it rapidly
Stop the playback or recording with STOP.
To rewind the tape:
To forward the tape:
Press REW.
Press FF.
SET
CANCEL
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
VCR/DVD/TV
To stop the tape-winding, press STOP. To switch to playback
directly (without STOP), press PLAY.
NOTE:
• This VCR selects the playback tape
speed SP or EP automatically.
• The Cassette tape and DVD disc can
be played back simultaneously. If you
press VCR or DVD, the tape playback
and DVD playback alternate with each
other on the screen.
Forward/reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see next page). To do this, press REW or FF and hold it
down. The unit will resume the tape winding as soon as the button
is released.
25
Picture search, Still Picture, Slow Motion, Tracking and Repeat playback
Picture Search
Repeat playback
Reverse picture search function
The whole of the video tape will be played until its end.
Then the tape will be winded until its beginning and the
playback will be repeated.
Press x 1 or x 2 during the playback.
Forward picture search function
Press x 1 or x 2 during the playback.
AUTO REPEAT, .
To return to playback: Press
the steps 1~2 on
1 Repeat
page 19 and select
VCR EXTENSION
AUTO REPEAT
SCENE REPEAT
AUDIO DUBBING
[OFF]
SELECT :
ENTER : ENTER
EXIT : MENU
Still Picture
Press PAUSE/STILL during playback. To resume
normal playback: Press
Slow Motion
Then press ENTER to
2 select
[ON] or [OFF].
SLOW
SLOW
During playback press
To return to playback: Press
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the SET + or – to reduce the noise bars.
If the still picture jitters excessively, press SET + or –
to stabilize the still picture.
Frame by Frame picture
Press PAUSE during playback.
Press SLOW one by one: The picture advances frame
by frame
To return to playback: Press PLAY or PAUSE.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET +/– to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
• Press A.TRK to reactivate automatic tracking again.
“AUTO TR.” will appear.
Note:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• These Special Playback will automatically change
to playback after approx. 5 minutes to protect the
video tape against excessive wear.
26
If [ON] is selected, the
playback will be repeated
endlessly.
VCR EXTENSION
AUTO REPEAT
SCENE REPEAT
AUDIO DUBBING
[ ON]
SELECT :
ENTER : ENTER
EXIT : MENU
SETUP MENU until the menu screen is
3 Press
cleared.
" will appear if you press CALL.
4 To start the playback, press
The playback will be repeated endlessly.
You can stop this playback anytime with
However the Auto Repeat is still switched on.
To cancel repeat mode:
Follow the above steps 1 and 2, then press
ENTER to select the OFF position. Press MENU
to return to the TV.
Skip Search
Each time you press SKIP SEARCH while a tape is
playing, the unit will fast-forward ahead 30 seconds
on the tape. You may press the button up to six times
in a row to move 180 seconds (three minutes) ahead.
For example: 1 press: 30 seconds of tape
2 presses: 60 seconds of tape
3 presses: 90 seconds of tape
ZERO RETURN function / Video Index Search system
ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
OSD.
1 Press
The counter display shows the tape
12:00 SUN
VPS CH 2
ZDF
running time during playback or recording.
VCR
STEREO
01:23:45 SP
SP
C. RESET at the desired tape position.
2 Press
The counter display will be reset to the
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
INPUT
TV VOL
REW
TIMER
TV/VCR
PLAY
FF
12:00 SUN
VPS CH 2
ZDF
"00:00:00" position (e.g. the begining of
recording).
VCR
STEREO
00:00:00 SP
SP
3 Press
when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the ”00:00:00” position.
The DISPLAY-button
Press DISPLAY during the playback. The clock
and tape counter alternate with each other in the
display.
VCR
REC
SKIP
STOP
SP
PAUS
TV/VCR CH +
SKIP
NOTE for Counter Display:
• If you rewind the tape from “00:00:00”,
a minus sign (“–”) will be displayed in
front of the time.
• When you load a tape, the counter will
reset to “00:00:00”.
• The counter does not function on
nonrecorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter stops.
NOTE for Video Index Search system:
• When you recorded an INDEX mark at
the very beginning of the tape, the
mark may not be found.
• During INDEX search, the tape may
stop and begin to play at a slightly
different location.
• INDEX may not function properly with
old or worn out video tapes.
• INDEX mark may not be found if it is
extremely close to the point where the
search began.
• In recording, if you stop recording
temporarily, the INDEX mark is not
recorded on the tape.
Video Index Search system
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
The Index Search function automatically
records an INDEX mark on the tape
whenever a recording is initiated.
CH 012
INDEX
Index Search
Press INDEX
or
during stop or play
+3
mode.
For Succeeding programs: Press INDEX
For Preceding programs: Press INDEX
(Additional press increases the INDEX NO.
up to 9.)
The INDEX
or
is pressed, the unit
or
is displayed
starts searching the INDEX NO. selected
and finds the portion, then playback starts
INDEX NO. (up to 9)
automatically.
To stop the Index Search, press STOP.
27
Recording a TV program
Recording and viewing the
same TV program
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
a cassette tape with the erase
1 Load
prevention tab intact.
The VCR will automatically turn on.
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
SP/EP to select the desired tape
2 Press
speed SP or EP.
The tape counter and SP or EP will
appear on the screen for about 4
seconds.
00 : 00 : 00 SP
the TV/CATV option to the appropriate position (See page
3 Set
18).
TV
- VHF/UHF channels
CATV - CABLE TV channels
INPUT
TV VOL
TIMER
Number keys or CH +/– to select the channel to be
4 Press
recorded.
TV/VCR
PLAY
REW
FF
1-9
REC
SKIP
/INDEX
SET
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
Press 0 twice and then 1-9 as required. Example: To
select 2, Press “002”.
10-12
Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for “12”.
CH 110
13-99
Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
VCR/DVD/TV
NOTE:
• If the erase prevention tab is removed,
the tape will eject when both the REC
and PLAY are pressed for recording.
• If you wish to watch the DVD playback
during the normal recording on VCR,
press DVD to change to DVD mode
and perform the DVD playback(see
P.36).
28
VHF/UHF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
the VCR, press REC.
5 On
Or on the Remote, while holding REC,
press PLAY.
" " will appear on the screen for about
4 seconds and “REC” will appear on the
display.
CH 110
Recording a TV program
To stop recording
Press STOP to stop recording.
" " will appear on screen for about 4
seconds.
To stop recording temporarily
TV
DVD MENU
DISPLAY
POWER
VCR
DVD
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
Press PAUSE to avoid recording unwanted
material. Press again to continue the
recording.
" will appear on screen for about 4
seconds and “ ” will blink to continue
pause mode.
NOTE:
• The pause function will be released after 5 minutes to prevent damage
to the tape or the VCR. The VCR will change to the STOP mode.
• You can select channel in the recording pause mode.
SP/EP
PLAY
MODE
TV
POWER
INPUT
TV VOL
TIMER
SKIP
/INDEX
SET
While the VCR is recording, press TV/VCR to select the TV position.
The “VCR” will go off and recording will continue.
Select the TV channel you want to watch by using the TV channel
selector. If the connected TV is JVC’s, use TV CH +/– after slide TV/
VCR/DVD switch to TV.
TV/VCR
PLAY
REW
REC
Recording one program while watching another
FF
STOP
NOTE:
Some CATV hookups do not permit viewing one channel while
recording another. See pages 12,13.
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
To Display VCR operation Status
Press CALL. The clock, day of the week and more informations will
be indicated.
While watching TV
DAY OF THE WEEK
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
CLOCK
8 : 30 AM THU
STEREO SAP
CH 125
CHANNEL
STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)
TAPE
SPEED
REAL TIME COUNTER
VCR/DVD/TV
00 : 00 : 00 SP
While operating a tape
OPERATING MODE
Auto Rewind feature
This VCR will automatically rewind the
tape when the tape has ended (except
during OTR and TIMER REC). It will
also eject the tape and turn the VCR’s
power OFF.
HI-FI STEREO
8 : 30 AM THU
HI-FI
CH 125
AUTO REPEAT
TAPE IN
00 : 00 : 00 SP
To cancel the indicating: Press CALL until all indicator disappear.
29
One-touch Timer Recording
The One-touch Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
Example: One-touch Timer Recording for 30 minutes.
a cassette tape with the erase
1 Load
prevention tab intact.
The VCR will automatically turn on.
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
INPUT
SP/EP to select the desired tape
2 Press
speed SP or EP.
The tape counter and SP or EP will
appear on the screen for about 4
seconds.
the TV/CATV option to the appropriate position (See page
3 Set
18).
TV
- VHF/UHF channels
CATV - CABLE TV channels
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
CH 110
SKIP
/INDEX
ENTER/
SELECT
SET
CANCEL
T V/V C R C H —
SLOW
A.MONITOR
SKIPCH
SEAR
VCR/DVD/TV
NOTE:
If you wish to watch the DVD playback
during the OTR, press DVD to change
to DVD mode and perform the DVD
playback(see P.36).
30
Number keys or CH +/– to select
4 Press
the channel to be recorded.
SET UP
MENU
OSD
00 : 00 : 00 SP
REC on the VCR or while holding REC, press PLAY on
5 Press
the Remote to begin recording. Press the button again to stop
recording after 30 minutes. Each additional press of REC will
increase recording time as shown in the chart below, up to a
maximum of 5 hours. The OTR and recording time will appear
on screen for about 4 seconds.
Press Recording time
once
NORMAL REC
twice
0:30
1:00
3 times
1:30
4 times
5 times
2:00
Press Recording time
3:00
6 times
4:00
7 times
5:00
8 times
9 times NORMAL REC
To cancel OTR
Press STOP or turn off the power.
" " will appear on screen for about 4
seconds.
OTR 0 : 30
CH 125
Timer Recording
Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
TV
VCR
DVD
POWER
Preparation:
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Make sure with OSD that the time and date are correct.(see
page 27).
Example: Program a timer recording for the 26th day, channel 125
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).
SETUP MENU. Check the
1 Press
TIMER REC SET optionTIMER REC
SET optionTIMER REC SET option is
selected, then press ENTER.
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
SET + or – to select one of the
2 Press
program line, then press ENTER.
TV
POWER
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
DATE
START
END
CH
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
––
––
––
––
––
––
––
––
DATE
START
〈+/–/ENTER/CANCEL/MENU〉
INPUT
SET + or – to select the date,
3 Press
then press ENTER.
TV VOL
REW
REC
TIMER
TV/VCR
PLAY
PAUS
TV/VCR CH
NOTE:
• If the clock symbol( ) blinks when the
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER to cancel the timer
program or press EJECT to remove
the cassette tape.
• To use the VCR while it is in timer
recording standby mode, press
TIMER, then press VCR to change to
VCR mode. After you use the VCR,
press TIMER again to put the VCR into
timer recording standby mode.
• If you press TIMER during timer
recording, the recording operation will
be interrupted. If you press TIMER
again within the programmed time, the
recording operation will start again.
• After a power failure or disconnection
of the power plug, all programmed
recording setting and time display will
be lost upon resumption of power. In
this case, reset the clock (see pages
15-17.) and reprogram any timer
recordings.
------------------------------------
-:--:--:--:--:--:--:--:--
END
-:--:--:--:--:--:--:--:--
CH
-----------------
〈+/–/ENTER/CANCEL/MENU〉
FF
STOP
26(SU)
–
–
–
–
–
–
–
–
the start time, end time, channel
4 Set
and tape speed as in step 3.
NOTE:
• Press CANCEL to move cursor backward
for correction.
• To record from external source set the
channel to "L". "L" will appear next to CH 125
(or 69).
enter other programs, repeat step 2
5 To
through 4. Or, press SETUP MENU
twice to return to the normal screen.
TIMER. The clock symbol( ) will appear on the display
6 Press
and the VCR stands by for recording. At the same time, VCR
mode will change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
NOTE:
• If the clock symbol( ) does not appear on the display in spite
of the pressing of TIMER, the cassette may not have been
loaded yet.(see page 18)
• If the cassette is ejected in spite of the pressing of TIMER , the
erase prevention tab of the cassette may have been
removed.(see page 18)
31
Timer-Recording
Timer Recording Special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) Timer recording
Follow the procedure for timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER. When
you press SET – repeatedly, the indicator at DATE will
change as follows, in case today is Friday.
The current day (Friday)
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
minus one day
MO-FR (Monday to Friday)
WKL-WE
(Weekly Wednesday)
WKL-TH (Weekly Thursday)
DATE
26(SU)
------------------------------------
START
-:--:--:--:--:--:--:--:--
END
-:--:--:--:--:--:--:--:--
Timer has been activated, now press TIMER
1 Iftothedeactivate
the Timer. The clock symbol( ) will
disappear. Then press VCR to change to VCR
mode.
confirm Timer program:
2 AtTopicture
1 on the previous
page select TIMER REC
SET option and press
ENTER.
Then the timer program list
as right will appear on the
screen.
cancel Timer program:
3 To
Press SET + or – to select
CH
-----------------
Confirmation / Cancellation of the Timer
Recording
the unnecessary program,
and press CANCEL to
cancel the program.
〈+/–/ENTER/CANCEL/MENU〉
DATE START END CH
26 (WE) 11:00PM 11:30PM 125SLP
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
––
––
––
––
––
––
––
DATE
START
END
CH
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
––
––
––
––
––
––
––
––
〈+/–/ENTER/CANCEL/MENU〉
〈+/–/ENTER/CANCEL/MENU〉
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SETUP MENU repeatedly until the TV-picture
4 Press
appears.
In case of Timer progarms-overlapping
• Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00
9 : 00
10 : 00
11 : 00
Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Control Settings
Prog.1
Prog.2
Prog.3
NOTE:
• The daily/weekly recording can be made continuously until the recording is canceled or the tape
reaches the end.
• During timer recording the automatic rewinding
mechanism does not function.
32
NOTE:
• If there are other timed record programs remaining,
TIMER must be pressed to reactivate the timer,
otherwise the remaining timer record programs will
be ignored.
• You can not confirm the Timer program during timer
recording operation.
Stereo Recording and Playback / Separate Audio Program (SAP)
Stereo Recording and
Playback
The VHS Hi-Fi audio system permits high
fidelity recording of MTS STEREO TV
broadcasts.
TV CATV
POWER
DVD SUBTITLE
CONTROL
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
INPUT
AUDIO
STEREO
NOTE:
When using a CATV system, stereo TV programs may be transmitted
over a mono cable channel. In this case the word "STEREO" will not
appear and the sound will be in mono.
Output selection
0 TV RETURN
C.C.
SLEEP TIMER
When a MTS STEREO broadcast is received, the STEREO will appear on the
screen and the program can be viewed or
recorded in stereo.
The Hi-Fi STEREO recording procedure is
the same as for normal recordings.
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO videotape, press A. MONITOR to select how the
audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
stereo broadcast or videotape audio is of poor quality. The "R" and "L"
positions allow the audio from the Right or Left Hi-Fi channel to be heard
over both TV speakers. This button has no effect when viewing a MONO
videotape or TV program. Each time when you press the button, OUTPUT
SELECTION display appears on the screen for several seconds. Refer
to the chart below.
LIGHT
RM-C394G
SELECT
/ENTER
MUTING
CH
VOL
VOL
OUTPUT
SELECTION
SOUND HEARD ON BOTH
SPEAKERS
STEREO
L CH
R CH
MONO
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
Separate Audio Program (SAP)
Your VCR is fitted with an SAP broadcast system which enables
you to switch to a separate audio program when viewing a
selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1 Repeat the steps 1~2 on page 19 and select SAP.
2 Then press ENTER to select [ON].
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
Then press SETUP MENU until
the menu screen is cleared.
TV / DVD
NOTE:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.
Listening to SAP
When the VCR is turned on or a channel selection is made, make
certain "SAP" appears on the screen. This means that the "Separate
Audio Program" broadcasting is available.
STEREO SAP
SAP
OR
33
Duplicating a video tape
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
a blank cassette tape with the erase prevenREC on the recording VCR.
1 Load
4 Press
tion tab intact into the recording VCR.
Or on the Remote, while holding REC, press PLAY.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
Then press PAUSE.
PLAY button on the playback VCR, then
5 Press
SP/EP to select the desired tape speed SP
2 Press
press PAUSE button.
or EP.
It is recommended that you set the SPEED to the
PAUSE on both the VCRs simultaneously to
SP mode on the recording VCR for best results.
6 Press
begin the duplicating process.
VCR CH + or – to select AUDIO/VIDEO input
3 Press
position. "L" will appear in the display.
Connection with second Video recorder
Playback VCR
Connection with Video camera
Playback Camcorder
To AV Jack
To VIDEO OUT
To AUDIO (R) OUT
AUDIO/VIDEO Cord (not supplied)
Recording VCR
To AUDIO (L) OUT
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
To VIDEO IN
To AUDIO (L) IN
34
AUDIO/VIDEO Cord (not supplied)
To AUDIO (R) IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
Disc
This unit applies to DVD discs from Region 1 only.
The loaded Disc (DVD, Video-CD, Audio-CD and MP3-CD) will be recognized automatically.
The suitable Disc-format are: DVD, CD-R and CD-RW.
Do not play DVD-ROM, DVD-Audio, CDV, CD-G or Photo CD to prevent accidental erasure of prerecorded material.
Some DVDs is played back with a Copy guard system. In case of a dubbing on video tape, strong disturbance may
occur. This is not a defect of this VCR/DVD.
Title
When two or more movies are recorded on a disc,
the disc is divided into two or more sections. Each
section is called a “TITLE”.
DVD DISC
TITLE1
CHAPTER 1
TITLE2
CHAPTER 2
CHAPTER 1
CHAPTER 2
CHAPTER 3
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Video-CD/Audio-CD
CD
Video-CD/Audio-CD-Track
An Audio CD can contain several items.
These are assigned to the tracks.
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.
Cleaning Disc
Wipe the disc with a clean, dry cloth from centre to edge.
• Do not wipe the disc round.
• Do not use liquid or aerosol cleaners.
35
Setting setup language
The setup language can be selected.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator
will light)
• When using an amplifier, switch on the amplifier.
1 Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
DVD to select the DVD
2 Press
mode. (The DVD indicator will
Reading
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
light)
“No Disc” will appear on the
screen. (If DVD disc has
already loaded, the playback
will start automatically.)
SP/EP
PLAY
MODE
TV
POWER
INPUT
SETUP MENU in the stop
3 Press
mode. The SETUP MENU of
Language Picture
Parental
Other
DVD will appear on the screen.
Then press
or
to select
Other.
TV VOL
TIMER
PLAY
REW
REC
SKIP
/INDEX
SET
/Enter/Setup/Return
TV/VCR
FF
STOP
PAUS
TV/VCR CH +
ENTER/
SELECT
Parental
Other
OSD Language English
CANCEL
SLOW
A.MONITOR
/Enter/Setup/Return
SET
T V/V C R C H —
SKIPCH
SEAR
VCR/DVD/TV
If the DVD/VCR does not operate
properly: Static electricity, etc., may
affect the player's operation. Disconnect
the AC power cord once, then connect
it again.
36
Language Picture
SKIP
/INDEX
SET UP
MENU
OSD
Press
to select OSD
4 Language.
and then press
or
5 Pressto select
desired language
(e.g. English), then press
ENTER.
Language Picture
Parental
OSD Language English
Other
English
Francais
Espanol
/Enter/Setup/Return
NOTE: To make SETUP screen disappear, press SETUP MENU
(or RETURN) while the SETUP screen is shown.
Playback procedure
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
OPEN/CLOSE.
1 Press
The disc tray will open.
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
INPUT
TV VOL
TIMER
SKIP
/INDEX
SET
PLAY
FF
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
T V/V C R C H —
OSD
printed label side up, align it with
the guides, and place it in its
proper position.
PLAY or OPEN/CLOSE.
3 Press
The disc tray closes automatically.
On the screen,
change to
“Reading” and then playback will
commence.
TV/VCR
REW
REC
a disc onto the tray.
2 Place
Hold the disc, position it with the
SLOW
A.MONITOR
VCR/DVD/TV
SKIPCH
SEAR
• A menu screen may appear on
the TV screen, if the disc has
a menu feature. In this case,
Reading
or
press
ENTER to operate a menu
feature.
STOP to end playback.
4 Press
• The DVD/VCR memorizes the stopped point, depending on
the disc. “ ” appears on the screen for approx. 4 seconds.
“ ” keep blinking in the display until the playback is stopped
completely. Press PLAY to resume playback (from the scene
point).
• If you press STOP again or unload the disc (“ ” appears
on the screen.), the DVD/VCR will clear the stopped point.
press OPEN/CLOSE.
5 Then
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
Note:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV
screen according to the type of loaded disc. In this case, check your disc again (See pages 25 and 35).
• Some discs may take a minute or so to start playback.
• A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature you
tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate
a problem with the DVD/VCR.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE,
"Reading" will appear and remain on the screen for approx. 40 seconds and then it will change to "No Disc".
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analogue stereo outputs. To
avoid possible damage to the audio system, the consumer should take proper precautions when the analogue
stereo outputs of the DVD/VCR are connected to an amplification system.
37
Special playback
Note: there may be a slight delay between you pressing the button and the
function activating.
Fast Forward Playback
Press FF during normal playback.
Each press of FF will increase the speed of the search x2, x4, x8, x20.
(in case of Audio-CD: x6 and x16 are available)
• To resume normal playback, press PLAY.
TV
VCR
DVD
POWER
Review Playback
Press REW normal playback.
Each press of REW will increase the speed of the search x2, x4, x8,
x20. (in case of Audio-CD: x6 and x16 are available)
• To resume normal playback, press PLAY.
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
Still Playback
Press PAUSE during normal
playback to pause playback.
TV
POWER
INPUT
To resume normal playback, press
PLAY.
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
Press PAUSE during still playback.
One frame is advanced each time
you press PAUSE.
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
To resume normal playback, press
PLAY.
CANCEL
T V/V C R
OSD
Frame Advance
CH —
SLOW
A.MONITOR
SKIPCH
SEAR
Slow-motion Playback
VCR/DVD/TV
Press SLOW during normal playback or still playback.
Each press of SLOW will change the speed of the slow x1/2, x1/4,
x1/6, x1/7.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE.
Note:
The unit is capable of holding a still video
image or On screen display image on your
television screen indefinitely. If you leave
the still video image or On screen display
image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
38
Locating a chapter or track
) Forward or SKIP (
) Reverse during playPress SKIP (
back to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.
Zooming / Locating Desired Scene
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Zooming
TV
VCR
DVD
POWER
This unit will allow you to zoom in on the frame image. You can
then make selections by switching the position of the frame.
ZOOM during playback.
1 Press
The centre part of the image will
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
be zoomed in.
Each press of ZOOM will change
the ZOOM
2 (x 1.5) and
3 (x
(x 1.3),
2.0).
SP/EP
PLAY
MODE
TV
POWER
INPUT
Press
or
to view a different part of the frame.
2 You
may move the frame from the centre position to UP, DOWN,
LEFT or RIGHT direction.
3 Inviewthe( zoomOff).mode press ZOOM repeatedly to return to a 1:1
TV VOL
TIMER
TV/VCR
PLAY
REW
FF
Locating Desired Scene
REC
SKIP
/INDEX
SET
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
To check the title, chapter and time, press OSD.
SEARCH MODE during
1 Press
playback.
T V/V C R C H —
OSD
SLOW
A.MONITOR
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
SKIPCH
SEAR
VCR/DVD/TV
Note:
• You can use the Pause, Slow, Search
or Skip feature in the zoom mode.
However, you cannot zoom in during
the Search playback.
• In case of the Video-CD playback with
PBC, the SEARCH MODE does not
work.
2 Press or to select the “Time”, “Title” or “Chapter”.
3 Press Number keys to change the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
ENTER.
4 Press
Playback starts.
• When you change the title, playback starts from Chapter 1 of
the selected title.
• Some discs may not work in the above operation.
39
Repeat playback
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Title, Chapter, Track Playback
TV
VCR
DVD
POWER
1 Press PLAY MODE during playback or stop mode.
DVD
CD
Repeat
Off
/Enter/Play Mode
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
Play Mode
Off
Repeat
Off
/Enter/Play Mode
ENTER once or twice to select “Chapter” or “Title”.
2 Press
to select “Repeat” and then press
In case of CD, at first press
ENTER once or twice to select “Track” or “All”.
DVD
CD
INPUT
Repeat
Chapter
/Enter/Play Mode
Play Mode
Off
Repeat
All
/Enter/Play Mode
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
CANCEL
SLOW
A.MONITOR
A-B Repeat Playback
SKIPCH
SEAR
VCR/DVD/TV
Note:
• Some discs may not work with the
repeat operation.
• In A-B repeat mode, subtitles near
point A or B may not appear.
• During the A-B Repeat Playback the
ANGLE feature will not operate.
• You may not be able to set A-B Repeat, depending on the scenes of the
DVD.
• A-B repeat does not work with an interactive DVD, MP3-CD and Video-CD
with PBC.
40
• Press PLAY to start Repeat playback.
• To resume normal playback, select Repeat Off.
SET
T V/V C R C H —
OSD
3 Press PLAY MODE again to make the screen disappear.
A-B repeat playback allows you to repeat material between two
selected points.
REPEAT A-B
1 Press
playback.
during
The start point is selected.
REPEAT A-B again.
2 Press
The end point is selected.
A B
Playback starts at the point that
you selected. Playback stops at
the end point, returns to Point A
automatically, then starts again.
To resume normal playback press REPEAT A-B again.
“
Off ” appears on the screen.
Program playback/Random playback (Audio CD)
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
TV
VCR
DVD
POWER
Program playback
You can arrange the order of tracks on the disc.
PLAY MODE in the stop
1 Press
mode.
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
ENTER repeatedly until
2 Press
the Program table as right
Play Mode
Off
Repeat
Off
/Enter/Play Mode
Play Mode
Repeat
appears.
Quit
TV
POWER
INPUT
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
,3
, 11.
Enter as 7
If the CD include e,g, only 11
tracks, the track numbers bigger
than 11 are not acceptable.
If you input a wrong number,
press CANCEL.
Quit
10
11
12
Program Playback
/Enter/0 9/Cancel/Play Mode
Play Mode
Repeat
1 09
2 03
3 11
: Program
: Off
10
11
12
Program Playback
/Enter/0 9/Cancel/Play Mode
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
SET
CANCEL
T V/V C R C H —
OSD
In case you wish to
3 Example:
program in order of 7, 3, 11:
: Program
: Off
SLOW
A.MONITOR
SKIPCH
SEAR
VCR/DVD/TV
Note:
• To cancel program play, select “Quit”
at step 4 and press ENTER.
• The program is cancelled when you
open the disc tray or turn the power off.
• To return to normal playback, select
“Off” at step 2.
• Random playback can not be
combined with Repeat playback.
or
to select
4 Press
“Program Playback” and press
Program Playback
ENTER. “Program Playback” will
appear on the screen. The
programmes you selected will
start to playback in the order.
To return to normal playback, select
“Play Mode: Off” at step 2 above.
Random playback
PLAY MODE in the stop
1 Press
mode.
2 Press
Play Mode
Off
Repeat
Off
/Enter/Play Mode
to select “Random”.
Play Mode
: Ramdom
Repeat
: Off
/Enter/Play Mode
PLAY.
3 Press
“Random Play” will appear on the screen and Random Playback
will start.
41
MP3 Playback
This player can play back the MP3-data
which recorded on CD-R or CD-RW. To
produce the MP3-data, you need a WindowsPC with CD-ROM drive and a MP3-encoding
Software (not supplied).
The Apple-HFS-System can not be played.
MP3 CD Information
Limitations on MP3 CD playback
• MP3 CD is the disc that standardized by
ISO9660, its file name must include 3-digits
extension letters, “mp3”.
• The directory and file names of the MP3
CD must be corresponded to the ISO
standardized files.
• This unit can read 200 files per one disc. If
one directory has more than 200 files, it
reads up to 200 files, the more files will be
omitted.
• MP3 CD may not be played in the recorded
order.
• As for multi-session disc, only the first
session can be played.
• If the CD has both audio tracks and MP3
files, only audio tracks are played.
• It would take one minute or more for this
unit to read MP3 files depending on its
structure.
• Music recorded by “Joliet Recording
Specification” can be played back, the file
name is displayed (within 17 letters) on the
screen shorter than the actual file names.
• The music files recorded by “Hierarchical
File System” (HFS) cannot be played.
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/
DVD. Then press DVD to select the DVD mode. (The DVD
indicator will light)
OPEN/CLOSE.
1 Press
The disc tray will open.
Then place a disc onto the tray.
PLAY or OPEN/CLOSE.
2 Press
The disc tray closes automatically.
On the TV-screen, “Reading” and
then reading file number will
appear. Reading will take as much
time as the number of file.
menu screen will appear
3 AonMP3
the TV screen.
Press
folder.
Notes on MP3 files
To play back MP3 CD in the recorded order,
1. please use the MP3 software with the
function that can record data alphabetically
or numerically.
2. we recommend you to put the name
including two-digit or threedigit number
like “01” “02” or “001” “002” on each file.
3. please refrain from making many subfolders by preference.
CAUTION:
• Some MP3 CDs can not be played back
depending on the recording conditions.
• The CD-R/RW that has no music data or
non-MP3 files can not be played back.
42
or ENTER to select
Track 1/12
01:28
Jazz
Japan
1 Pops
Japan
Bay Bridge
CLOSE MY EYES
DIVE TO BLUE
Honey
6 BLUE EYES
7 Blurry Eyes
8 flower
9 Lies and Truth10 winter fall
/0-9/Enter/Play Mode
Press / or / or Number keys to select your desired
4 track,
then press ENTER. Track is selected and play
commences.
• In case the folder include more than 11 tracks, press or
to display next track list.
Track 1/12
Limitations on display
• The maximum number for display is 17
letters. Available letters for display are the
following: capital or small alphabets of A
through Z, numbers of 0 through 9, and _
(under score).
• Other letters than those above are replaced
in hyphen.
Reading
MP3 15
01:28
Jazz
Japan
1 Pops
Japan
Bay Bridge
CLOSE MY EYES
DIVE TO BLUE
Honey
6 BLUE EYES
7 Blurry Eyes
8 flower
9 Lies and Truth
10 winter fall
/0-9/Enter/Play Mode
Track 1/12 01:28
Jazz
Japan
1 Pops
11 Mother
12 Hold Your Last
/0-9/Enter/Play Mode
STOP to end playback.
5 Press
• The unit records the stopped point. “
” appears on the
screen. Press PLAY to resume playback (from the scene
point).
• If you press STOP again or unload the disc, the unit will
clear the stopped point.
press OPEN/CLOSE.
6 Then
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
Note:
• During MP3-Playback, you can not use SEARCH, A-B
Repeat functions.
• You can use Repeat(Track or All) and Random functions for
MP3 CD Playback.(See page 40 and 41)
Marking Desired Scenes
The unit stores the points that you
want to watch again up to 3 points.
You can resume playback from the
each scene.
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Marking the Scenes
TV
VCR
DVD
POWER
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
POWER
MARKER during
1 Press
playback.
the blank Marker using
2 Select
/ .
Then press ENTER at the desired
scene.
Marker
Marker
Marker
/Enter/Cancel/Marker
Marker
00 27 54
Marker
Marker
/Enter/Cancel/Marker
• Repeat this procedure to set
the other 2 scenes.
INPUT
3 Press MARKER to remove this display.
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
MARKER during playback
1 Press
or stop mode.
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
CANCEL
SLOW
A.MONITOR
Marker
00 27 54
Marker
01 16 25
Marker
02 08 31
/Enter/Cancel/Marker
SET
T V/V C R C H —
OSD
Returning to the Scenes
SKIPCH
SEAR
2 Press
1-3.
to select the Marker
Marker
00 27 54
Marker
01 16 25
Marker
02 08 31
/Enter/Cancel/Marker
VCR/DVD/TV
Note:
• Some discs may not work with the
marking operation.
• The marking is canceled when you
open the disc tray or turn the power off.
• Some subtitles recorded around the
marker may fail to appear.
• During the MARKER screen is
appearing, if you do a special playback
as the Fast Forward/Review Playback
or SKIP, the MARKER screen will
disappear. Press MARKER again as
soon as you find the desired scene.
ENTER.
3 Press
Playback starts from the marked scene.
To Cancel the Mark
1 Press MARKER.
2 Press / to select the Marker 1-3.
CANCEL.
3 Press
To remove this display, press MARKER.
43
Changing soundtrack language / Subtitles
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Changing soundtrack language
You can select the language when you play a multilingual disc.
A.MONITOR
1 Press
playback.
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
during
2/8 Fra DolbyDigital
The current soundtrack language
will appear.
SP/EP
PLAY
MODE
TV
POWER
INPUT
TV VOL
REW
TIMER
A.MONITOR repeatedly
2 Press
until the desired language is
1/8 Eng DolbyDigital
selected.
The on-screen display will
disappear after a few seconds.
TV/VCR
PLAY
FF
In case of VIDEO CD playback
REC
SKIP
/INDEX
SET
STOP
PAUS
TV/VCR CH +
ENTER/
SELECT
SET UP
MENU
SKIP
/INDEX
SET
CANCEL
T V/V C R
CH —
Note:
• If the desired language is not heard
after pressing the button several times,
the language is not recorded on the disc.
• Changing soundtrack or subtitle
language is cancelled when you open
the disc tray or turn the power off. The
initial default language or available
language will be heard and seen if the
disc is played back again.
• Depending on the DVD, you may not be
able to turn the subtitles on even if they
are recorded on it. Depending on the
DVD, you may not be able to turn the
subtitles off. Depending on the DVD, you
may not be able to change the subtitles
even if multilingual subtitles are recorded
on it. While playing the DVD, the subtitle may change when: -you open or
close the disc tray -you change the title.
• In some cases, the subtitle language is
not changed to the selected one
immediately.
44
Audio type changes as follows each time you press A.MONITOR.
Turning the Subtitles On and Off
When playing back a disc recorded with subtitles, you can turn
the subtitles on or off.
Press SUB TITLE during playback
until “OFF” appears.
Off
Changing the subtitle language
You can select the language when playing back a disc
recorded with multi-lingual subtitles.
Press SUB TITLE repeatedly during
playback until your desired language
appears.
The on-screen display will disappear
after a few seconds.
1/32 Eng
Changing angles / Title selection / DVD menu
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
TV
VCR
DVD
POWER
Changing Angles
When playing back a disc recorded with multi-angle facility, you
can change the angle that you are viewing the scene from.
ANGLE during playback.
1 Press
The current angle will appear.
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
1/9
SP/EP
PLAY
MODE
TV
2 Press ANGLE repeatedly until the desired angle is selected.
POWER
INPUT
Title Selection
TV VOL
TIMER
TV/VCR
PLAY
REW
REC
SKIP
/INDEX
SET
FF
STOP
PAUS
TV/VCR CH +
SKIP
/INDEX
ENTER/
SELECT
SET UP
MENU
Two or more titles are recorded on some discs. If the title menu
is recorded on the disc, you can select the desired title.
TITLE during playback.
1 Press
Title menu appears on the screen.
2 Press / or / to select the desired title.
ENTER or PLAY.
3 Press
The playback of the selected title will start.
SET
CANCEL
T V/V C R C H —
OSD
SLOW
A.MONITOR
SKIPCH
SEAR
VCR/DVD/TV
DVD Menu
Some DVDs allow you to select the disc contents using the
menu.
When you play back these DVDs, you can select the subtitle
language and sound-track language,etc. using the DVD menu.
DVD MENU during playback.
1 Press
The DVD menu appears on the screen.
Note:
• Depending on the DVD, you may not
be able to change the angles even if
multi-angles are recorded on the DVD.
• Depending on the DVD, you may not
be able to select the title.
• Depending on the DVD, a "title menu"
may simply be called a "menu" or "title"
in the instructions supplied with the
disc.
• Press DVD MENU again to resume playback at
the scene when you pressed DVD MENU.
2 Press / or / to select the desired item.
ENTER.
3 Press
The menu continues to another screen. Repeat steps 2 and 3 to
set the item completely.
45
Parental control
Some discs are specified not suitable
for children. Such discs can be limited
not to play back with the unit.
TV
VCR
DVD
POWER
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light)
Parental control setting
SETUP MENU in the stop
1 Press
mode.
Press or to select “Parental”.
Then press ENTER.
Language Picture
Password
Parental
Parental
Other
0 9/Cancel
/Enter/Setup/Return
DVD MENU
DISPLAY
MARKER
RETURN
OPEN/
CLOSE
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
ZOOM
TITLE
REPEAT
A-B
SP/EP
PLAY
MODE
TV
or
to select
2 Press
“Parental 8”, then press ENTER
until the level you require
appears.
Language Picture
Password
Parental
POWER
Parental
Other
/Enter/Setup/Return
INPUT
TV VOL
TIMER
TV/VCR
REC
SKIP
/INDEX
SET
input a 4-digit password (e.g.:
1234).
PLAY
REW
FF
STOP
PAUS
TV/VCR CH +
• If you input a wrong number,
press CANCEL.
• Be sure to remember this
number!
ENTER/
SELECT
SET
CANCEL
T V/V C R C H —
Language Picture
Password
Parental
Parental
Other
1234
0 9/Cancel
/Enter/Setup/Return
SLOW
A.MONITOR
SKIPCH
SEAR
Level 1: DVD software for adults cannot be played back.
Level 8: All DVD software can be played back.
Select from the level 1 to level 8. The limitation will be more
severe as the level number is lower.
ENTER.
4 Press
change to .
1234
VCR/DVD/TV
Note:
• To cancel program play, select “Quit”
at step 4 and press ENTER.
• The program is cancelled when you
open the disc tray or turn the power off.
• To return to normal playback, select
“Off” at step 2.
• Random playback can not be
combined with Repeat playback.
46
----”.
SKIP
/INDEX
SET UP
MENU
OSD
once to select “Password
3 Press
Then press number keys to
Language Picture
Password
Parental
Parental
0 9/Cancel
/Enter/Setup/Return
Other
Parental control setting
Some discs are specified not suitable
for children. Such discs can be limited
not to play back with the unit.
DVD SETUP in the stop mode.
1 Press
Press
or
to select
Language Picture
Parental.
Then press
TV CATV
or ENTER.
Password
Parental
Parental
Other
POWER
DVD SUBTITLE
CONTROL
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
or
to select
2 Press
Parental, then press
or
until the level you require appears.
Language Picture
Password
Parental
Parental
Other
0 TV RETURN
C.C.
SLEEP TIMER
0 9/Cancel
/Enter/Setup/Return
/Enter/Setup/Return
INPUT
AUDIO
LIGHT
RM-C394G
SELECT
/ENTER
MUTING
CH
VOL
VOL
CH
Press
or
3 Password.
to select
Press number buttons
(0-9) to input a 4-digit
password.
Be sure to remember this
number!
Language Picture
Password
Parental
Parental
Other
1234
0 9/Cancel
/Enter/Setup/Return
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
TV / DVD
Note:
• If each setup (P.35~42) has been completed, the unit can always be worked
under the same conditions (especially with DVD discs).
Each setup will be retained in the
memory if you turn the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with
specific rating level information though
its disc jacket says "adult". For those
discs, the age restriction will not work.
• If you input a wrong
number, press CANCEL.
• Level 1: DVD software for adults cannot be
played back.
• Level 8: All DVD software can be played back.
• Select from the level 1 to level 8. The limitation will be
more severe as the level number is lower.
If you want to lock this Parental Level, press
to select
the Password.
Press ENTER to store the
Language Picture Parental Other
password.
Password
Note: Now the rating is
Parental
locked and the setting cannot be changed unless you
enter the correct password.
0 9/Cancel
/Enter/Setup/Return
DVD SETUP or RETURN to remove the parental
4 Press
control screen.
47
To change the parental level
Press DVD SETUP in the stop mode or No Disc.
1 Press
or
to select
Language Picture
Parental.
Then press
TV CATV
or ENTER.
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
INPUT
number buttons
2 Press
(0-9) to enter the password
you have stored.
Language Picture
Password
Parental
Parental
Other
1234
0 9/Cancel
/Enter/Setup/Return
0 TV RETURN
C.C.
SLEEP TIMER
Other
0 9/Cancel
/Enter/Setup/Return
POWER
DVD SUBTITLE
CONTROL
TITLE
Password
Parental
Parental
AUDIO
LIGHT
RM-C394G
ENTER.
3 Press
The rating is now unlocked.
SELECT
/ENTER
MUTING
Language Picture
Password
Parental
Parental
Other
CH
0 9/Cancel
/Enter/Setup/Return
VOL
VOL
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
or
to select
4 Press
Parental, then press
or
to change the parental
level.
Language Picture
Password
Parental
Parental
Other
/Enter/Setup/Return
or
to select
5 Press
Password, then press
TV / DVD
Note:
Do not forget the password. If you forget
the password, contact the dealer that you
purchased the unit from.
number buttons (0-9) to
enter the password.
Note: You can change the
password if you want.
ENTER.
6 Press
Now the parental level is
changed and locked.
DVD SETUP or RE7 Press
TURN to remove the parental control screen.
48
Language Picture
Password
Parental
Parental
Other
1234
0 9/Cancel
/Enter/Setup/Return
Language Picture
Password
Parental
Parental
0 9/Cancel
/Enter/Setup/Return
Other
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc
may try to temporarily cancel the
rating level that you have set.
It is up to you to decide whether to
cancel the rating level or not.
TV CATV
POWER
DVD SUBTITLE
CONTROL
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
a DVD disc and press
1 Load
PLAY or OPEN/CLOSE on
the unit (see P.27).
the DVD disc has been designed to temporarily cancel the
2 IfRating
level, the screen which follows the “Reading” screen
will change, depending on which disc is played. If you select
“YES” with the SELECT key, “Your disc exceeds The
parental control level#.” screen will then appear.
Reading
Parental Control Level
Cancel Picture
0 TV RETURN
C.C.
SLEEP TIMER
Your disc exceeds
The parental control level#.
/Enter/Return
INPUT
AUDIO
LIGHT
RM-C394G
SELECT
/ENTER
MUTING
CH
VOL
VOL
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
TV / DVD
Note:
This temporary cancellation of rating level
will be kept until the disc is ejected.
When the disc is ejected, the original rating
level will be set again automatically.
you wish to cancel the set rating level temporarily, select
3 If“Parental
Control Level” with
or , then press SELECT.
If the 4-digit password at step 3 on P.35 has been set, the
password entering screen will appear as shown in step 4
below.
Alternatively, if the password has not been set, playback
will commence. If you don’t know (or have forgotten) the
password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/CLOSE to
remove the disc.
the password with
4 Enter
number buttons (0-9).
Then press ENTER.
Please enter the
4 digit password
If you interrupt the entering, press RETURN.
Enter/0 9/ Cancel/Return
will commence if the entered password was
5 Playback
correct.
49
Setting the aspect ratio of TV screen
You can select the aspect ratio for
your TV.
1 Press DVD SETUP in the stop mode or No Disc.
Press
Picture.
TV CATV
or
to select
Parental
Other
POWER
DVD SUBTITLE
CONTROL
/Enter/Setup/Return
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
2 Press
press
Screen.
or ENTER, then
or
to select Tv
AUDIO
Language Picture
Tv Screen
Display
Parental
Other
4:3
On
/Enter/Setup/Return
0 TV RETURN
C.C.
SLEEP TIMER
INPUT
Language Picture
LIGHT
RM-C394G
SELECT
/ENTER
MUTING
CH
VOL
VOL
3 Press
Press
or ENTER.
or
to select
your desired screen type,
then press ENTER.
Language Picture
Parental
4:3
On
4:3
4:3
16:9
Tv Screen
Display
Other
/Enter/Setup/Return
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
TV / DVD
Note:
If the DVD disc is not formatted in the pan
& scan style, it displays 4:3 style.
50
You have the following screen sizes to choose from:
4:3
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
PAN SCAN
4:3
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
16:9
WIDE SCREEN
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
make SETUP screen disappear, press DVD SETUP or
4 ToRETURN
while the SETUP screen is being displayed.
Setting on Screen display/Status display of Disc
On screen display can be switched on
or off when you press the buttons.
1 Press DVD SETUP in the stop mode or No Disc.
Press
Picture.
TV CATV
or
to select
Language Picture
Other
POWER
DVD SUBTITLE
CONTROL
/Enter/Setup/Return
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
2 Press
0 TV RETURN
C.C.
SLEEP TIMER
INPUT
Parental
AUDIO
LIGHT
press
Display.
or ENTER, then
or
to select
Language Picture
Tv Screen
Display
Parental
Other
4:3
On
/Enter/Setup/Return
Press /
or ENTER to
3 select
ON or OFF.
RM-C394G
Language Picture
Tv Screen
Display
Parental
Other
4:3
Off
SELECT
/ENTER
MUTING
CH
/Enter/Setup/Return
VOL
VOL
ON: On screen displays appear when you press the
buttons (factory setting).
OFF: On screen displays do not appear when you press
any buttons.
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
make SETUP screen disappear, press DVD SETUP or
4 ToRETURN
while the SETUP screen is being displayed.
Status display of Disc
Each Press of DISPLAY, the status display of the disc will appear
on the screen and change as follows.
DVD
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 Eng DolbyDigital
1/32 Eng
Title
TV / DVD
CD
34:56
71:33
34:56
71:33
Track 11/99
To make status display disappear, press DISPLAY again.
51
Setting menu language
You can select the language of the
disc menu messages of DVDs.
1 Press DVD SETUP in the stop mode or No Disc.
Press
or
Language.
TV CATV
to select
Language Picture
Parental
Other
POWER
DVD SUBTITLE
CONTROL
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
/Enter/Setup/Return
2 Press
press
or ENTER, then
or
to select
Menu.
DISPLAY
Menu
Subtitle
Audio
0 TV RETURN
C.C.
SLEEP TIMER
INPUT
Language Picture
AUDIO
Parental
Other
English
English
English
/Enter/Setup/Return
LIGHT
RM-C394G
SELECT
/ENTER
MUTING
CH
VOL
VOL
CH
3 Press
or ENTER.
Press
or
to select
your desired language,
then press ENTER.
Language Picture
Menu
Subtitle
Audio
Parental
English
English
English
Other
English
Francais
Espanol
Other
0 9/Cancel
/Enter/Setup/Return
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
English, Francais, Espanol
The selected language is the first-priority Menu language.
OTHER: Other language can be selected (See the Language Code List on page 43).
make SETUP screen disappear, press DVD SETUP or
4 ToRETURN
while the SETUP screen is being displayed.
TV / DVD
52
Setting subtitle language
The same subtitle language can
always be selected even if you replace
the disc or turn the power off.
Press DVD SETUP in the stop mode or No Disc.
1 Press
or
to select
Language.
TV CATV
Language Picture
Parental
Other
POWER
DVD SUBTITLE
CONTROL
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
CANCEL
DISPLAY
INPUT
2 Press
press
Subtitle.
or ENTER, then
or
to select
Language Picture
Menu
Subtitle
Audio
AUDIO
Parental
Other
English
English
English
/Enter/Setup/Return
0 TV RETURN
C.C.
SLEEP TIMER
/Enter/Setup/Return
LIGHT
RM-C394G
SELECT
/ENTER
MUTING
CH
3 Press
Press
or ENTER.
or
to select
your desired language,
then press ENTER.
VOL
VOL
Language Picture
Menu
Subtitle
Audio
Parental
English
English
English
0 9/Cancel
/Enter/Setup/Return
Other
English
Francais
Espanol
Other
Automatic
Off
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
TV / DVD
Note:
If the selected language is not recorded
on the disc, the first-priority language is
selected.
English, Francais, Espanol
The subtitle is displayed with the selected language if it is
recorded on the disc.
OTHER:
If you want to select another language, enter the language
code (see the language code list on page 43).
AUTOMATIC:
• The unit will automatically select the same language in
the AUDIO setting.
• When the unit selects the same language as the AUDIO,
the subtitles will not appear during playback.
• When you do not use the same language as the AUDIO,
the subtitles will appear during playback.
Off:
Subtitles do not appear.
make SETUP screen disappear, press DVD SETUP or
4 ToRETURN
while the SETUP screen is being displayed.
53
Setting audio soundtrack language
The same audio soundtrack language
can always be selected by your unit
even if you replace the disc or turn the
power off.
TV CATV
Press DVD SETUP in the stop mode or No Disc.
1 Press
or
to select
Language Picture
Parental
Other
Language.
POWER
DVD SUBTITLE
CONTROL
/Enter/Setup/Return
TITLE
ZOOM
REPEATA-B RETURN
AUDIO
PLAY MODE
SLOW
ANGLE
Press
2 press
or ENTER, then
or
to select
Audio.
CANCEL
DISPLAY
Language Picture
Menu
Subtitle
Audio
Parental
Other
English
English
English
/Enter/Setup/Return
INPUT
0 TV RETURN
C.C.
SLEEP TIMER
AUDIO
LIGHT
3 Press
RM-C394G
SELECT
/ENTER
MUTING
CH
VOL
VOL
or ENTER.
Press
or
to select
your desired Audio Language, then press ENTER.
Language Picture
Menu
Subtitle
Audio
Parental
English
English
English
0 9/Cancel
/Enter/Setup/Return
Other
English
Francais
Espanol
Other
Original
CH
DVD SETUP
TV MENU
PREV NEXT
TV/DVD DVD MENU
B.SEARCH
PLAY
F.SEARCH
OPEN/CLOSE
STOP
PAUSE/STILL
• English, Francais, Espanol:
The language you have selected will play if it is
recorded on the disc.
• OTHER: If you want to select another language,
enter the language code (See the Language Code List
on page 43).
• ORIGINAL: The unit will select the first priority language
of each disc.
make SETUP screen disappear, press DVD SETUP or
4 ToRETURN
while the SETUP screen is being displayed.
TV / DVD
Note:
If the selected language is not recorded
on the disc, the original language will be
heard.
54
Language Code List
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE"
(see pages 40-42).
Language Name Code Language Name Code Language Name Code Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto
2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance 2823
Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese 3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian
2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
55
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer
or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
POWER
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
10
Poor sound or No sound
• Station or CATV experiencing problems, tune to another station.
• Check Volume adjustments (Volume and Muting).
• Check for sources of possible interference.
14
14
48
Poor picture or No picture
• Station or CATV experiencing problems, tune to another station.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
14
11,12
48
22
Poor reception on some channels
• Station or CATV experiencing problems, tune to another station.
14
• Station signal is weak, reorient antenna to receive weaker station. 11,12
• Check for sources of possible interference.
48
Poor color or no color
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
TV/DVD does not operate.
TV BROADCAST RECEPTION
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Check antenna orientation.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
14
18
22
11,12
48
14
18
–
11
12
17
14
Horizontal or diagonal bars on
screen
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
11,12
48
No reception above channel 13
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
17
11
TV shuts off
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
18
15
–
18
Closed - Caption is not activated.
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or
rotate antenna.
• Press C.C. button to turn on the closed caption decoder.
Picture wobbles or drifts
No CATV reception
Display is not shown in your
language.
56
• Select proper language in the menu options.
11,12
17
13
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
27
25
–
No picture
• TV/AV selector is not set correctly.
26
No sound
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
• Select the correct Audio Output position on AV amplifier.
–
28
44
Picture is distorted during CUE or
REVIEW.
• The picture will be distorted occasionally.
–
Stopping playback, search, slowmotion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
–
No 4:3 (16:9) picture
• The setup does not match your TV.
38
No on-screen display
• Select Display On.
39
No surround sound
• The setup does not match your stereo system.
44
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several
minutes, then replug it.
–
Playback does not start when the
title is selected.
• Check the RATING LEVEL setup.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
No subtitle
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
41
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
34
• The function is prohibited with the unit or the disc.
–
appears on the screen.
41,42
–
REMOTE CONTROL
The remote control does not
function.
35,36
• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
10
57
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable
TV system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is
the direct path and the other is reflected by tall buildings, hills or other
large objects. Changing the direction or position of the antenna may
improve the reception.
SNOW
If the TV/VCR is located far from the TV station, in a fringe reception
area where the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external
antenna may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a
loss of contrast in the picture. Changing the direction and position of
the antenna or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST
or BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
58
Specifications
GENERAL
Power supply:
Power consumption:
Weight:
Dimensions:
TELEVISION
Picture tube:
Tuner type:
Receiving channels:
Antenna input:
Speaker:
Audio output power:
DVD/CD player
Signal system:
Applicable disc:
Audio characteristics:
Frequency response:
S/N Ratio:
Harmonic distortion:
Wow and flutter:
Dynamic range:
Input/Output:
Headphone Jack:
Digital audio out:
Pickup:
ACCESSORIES:
AC 120V 60Hz
Operation: 120W
Stand by: 8W
56.1lbs (25.5 kg)
Width : 22-5/8 inches (574 mm)
Height : 20-3/8 inches (515 mm)
Depth : 19-1/8 inches (483 mm)
Type 20 (508 mm diagonal)
Quartz PLL Frequency Synthesized
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
VHF/UHF In 75 ohm coaxial
3" (76 mm), 8 ohm x 2
2.5W + 2.5W
NTSC
1. DVD (12cm, 8cm)
2. CD (12cm, 8cm)
DVD: 4Hz - 22KHz
CD: 4Hz - 20KHz
90dB
0.01%
Below Measurable Level
96dB
Inputs : Video : (RCA) 1 Vp-p/75ohm
Audio : (RCA) –8 dB/50Kohm
Outputs : Video : (RCA) 1 Vp-p/75ohm
Audio : (RCA) –8 dB/1Kohm
3.5mm Stereo mini-jack
0.5Vp-p 75ohms terminated
CD : Wavelength: 775 - 815 nm
Maximum output power: 0.5 mW
DVD : Wavelength: 650 - 666 nm
Maximum output power: 2.0 mW
Remote control x 1
Batteries (2 x AA)
59
JVC COMPANY OF AMERICA
Division of U.S. JVC CORP.
1700 Valley Road
Wayne, New Jersey 07470
2A30201A K
01/03
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada M1X 1A7
Printed in Thailand

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:10:31 13:24:52
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2001:10:31 13:29:12+09:00
Page Count                      : 60

EXIF Metadata provided by EXIF.tools