ORION ELECTRIC M2D3A DVD-RW/VCR TV Interface Device User Manual hyoushi

Download:
Mirror Download [FCC.gov]
Document ID	351565
Application ID	f47JQzKa0MyscUfVApMQGg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	263.95kB (3299419 bits)
Date Submitted	2003-08-27 00:00:00
Date Available	2003-08-27 00:00:00
Creation Date	2003-08-20 23:23:57
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2003-08-22 14:16:59
Document Title	hyoushi
Document Creator	PageMaker 6.0
Document Author:	hana

Recording a TV program
You can record programs you watch
on TV onto video tapes or DVDs.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Load a recordable DVD or video tape into the unit.
• Press DVD/VCR to select the appropriate mode.
REC MODE/SPEED and set the re1 Press
cording mode.
The recording mode will appear on the TV
monitor and change every time REC
MODE/SPEED is pressed.
Video recording modes: SP/SLP
DVD recording modes: XP/SP/LP/SLP
00 : 00 : 00 SP
SP is the normal recording mode for video tapes. SLP offers 3
times the recording time as SP. For more information on DVD recording modes, see page 42.
2 Set the TV/CATV option to the appropriate position (page78).
TV
- VHF/UHF channels
CATV - CABLE TV channels
Press the numeric keys or CH
3 recorded.
1-9
10-12
13-99
100-125
to select the channel to be
Press 0 twice and then 1-9 as required.
Example: To select 2, Press “002”.
Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for “12”.
CH 110
Press 2 digits in order.
Example: Press 22 for “22”.
Press the 3 digits in order.
Example: Press 110 for “110”.
VHF/UHF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69
NOTES:
• When record on a DVD, it takes
some time from when you press
REC/OTR until recording actually
starts. (With a DVD-RW it takes
about 2 seconds, while with a
DVD-R it takes about 10 seconds.)
Press REC/OTR a little before your
preferred starting point.
With a video tape, recording starts
almost at the same time you press
REC/OTR.
• If the erase prevention tab of video
tapes is removed, the tape will
eject when REC/OTR is pressed
for recording.
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
4 Press REC/OTR.
CH 110
When recording starts, “ ” appears on
the screen for about 4 seconds.
44
VRDVD4005_P37-P50
44
03.8.21, 1:19 AM
INDEX
Recording a TV program
To stop recording
Press STOP to stop recording.
“ ” will appear on the screen for about 4
seconds.
To stop recording temporarily
Press PAUSE/STILL to avoid recording
unwanted material.
” will appear on screen for about 4 sec“
onds.
Press again to resume recording.
NOTES:
• The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode.
• You can select a recording channel in the recording pause mode.
Recording one program while watching another
While the unit is recording, press TV/VCR to select the TV position.
The “VCR” will go off and recording will continue.
Select the TV channel you want to watch by using the TV channel
selector.
NOTE:
Some CATV hookups do not permit viewing one channel while recording another. See pages 18, 19.
Auto Rewind feature
This VCR will automatically rewind
the tape when the tape has ended
(except during OTR and TIMER
REC). It will also eject the tape.
45
VRDVD4005_P37-P50
45
03.8.21, 1:19 AM
One-touch Timer Recording (OTR)
Preparation:
The One-touch Timer Recording
feature provides a simple and convenient way to make a timed recording.
• Turn ON the TV and set to the video input mode.
• Load a recordable DVD or video tape into the unit.
• Press DVD/VCR to select the appropriate mode.
Example: One-touch Timer Recording for 30 minutes.
REC MODE/SPEED to select the
1 Press
recording mode.
For the recording mode, see the step 1 on
page 44.
00 : 00 : 00 SP
the TV/CATV option to the
2 Set
appropriate position (See page
78).
numeric keys or CH
3 Press
the channel to be recorded.
TV
- VHF/UHF channels
CATV - CABLE TV channels
to select
CH 110
REC/OTR. Press the button again to stop recording after 30
4 Press
minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours.
The OTR and recording time will appear on the screen for about 4
seconds.
Press Recording time
NORMAL REC
once
0:30
twice
1:00
3 times
1:30
4 times
2:00
5 times
Press Recording time
3:00
6 times
4:00
7 times
5:00
8 times
6:00
9 times
10 times NORMAL REC
To cancel OTR
Press STOP or turn off the power.
“
” will appear on screen for about 4 seconds.
NOTE:
If you wish to watch the DVD playback during the OTR, press DVD/
VCR to change to DVD mode and
perform the DVD playback (see page
35).
46
VRDVD4005_P37-P50
46
03.8.21, 1:19 AM
OTR 0 : 30
CH 110
INDEX
Timer recording
Setting timer recording
The timer recording system allows
you to select the date, time and
channel and record the desired programs. Up to 8 timer programs
within a month can be stored in this
unista
Preparation:
•
•
•
•
Turn ON the TV and set to the video input mode.
Load a recordable DVD or video tape.
Press DVD/VCR to select the appropriate mode.
Confirm that the clock is indicating the correct time.
Example: Set the recording mode to LP; the TV program is on channel
6 starting at 8:00 PM and stopping at 9:30 PM on a date of 20th.
SETUP.
1 Press
The SETUP MENU screen appears.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
Press
or
to select “TIMER REC SET” and press ENTER.
2 The
TIMER REC SET screen will appear.
SETUP MENU
TIMER REC SET
TYPE
DATE
START
END
CH
REC
REC
TO
MORE
NEW
SELECT
ENTER/
SELECT
RETURN
ENTER
BACK
CLEAR/
CANCEL
CANCEL
SETUP
END
or
to select “NEW” and press ENTER.
3 Press
The program screen will appear.
NOTES:
• If a tape is unavailable or no disc
space is available, the timer indicator (
) flashes. Replace it with an
available one.
• If no disc is loaded in the recorder
for 30 minutes or more, all the settings for timer recording will be
erased. In such a case, adjust the
clock and select the timer recording
again.
• When 8 programs have already selected for timer recording, “NEW”
doesn’t appear on the TIMER REC
SET screen.
SETUP MENU
TIMER REC SET
TYPE
EVERY SUN
ONCE
11,08,03(--)
EVERY SUN
02:17
EVERY MON
EVERY TUE
03:17
EVERY WED
EVERY000
THU
EVERY
FRI
DVD
MON-FRI
XP
DATE
START
END
CH
REC TO
REC MODE
REC
REC
TO
MORE
OK
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
47
VRDVD4005_P37-P50
47
03.8.21, 1:20 AM
Timer recording
Press
4 Press
or
or
to select “TYPE” and press ENTER.
to select “ONCE” from the list and press ENTER.
SETUP MENU
TIMER REC SET
TYPE
EVERY SUN
ONCE
11,08,03(--)
EVERY SUN
02:17
EVERY MON
EVERY TUE
03:17
EVERY WED
EVERY000
THU
EVERY
FRI
DVD
MON-FRI
XP
DATE
START
END
CH
REC TO
REC MODE
REC
REC
TO
MORE
OK
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
5 Press
Press
or
to select “DATE” and press ENTER.
or
to select the date to be recorded from the list and
press ENTER.
or
to select “START” and press ENTER.
6 Press
Set the time when the recording is started.
NOTES:
• If you select timer recording on a
specified date only one time, select
“ONCE” in the “TYPE” for recording. You can record same days of
every week or from Monday to Friday using the item “TYPE”. The
items you can select are as follows:
ONCE: Recording on the selected
“DATE”
EVERY SUN: Recording every Sun.
EVERY MON: Recording every
Mon.
EVERY TUE: Recording every Tue.
EVERY WED: Recording every
Wed.
EVERY THU: Recording every Thu.
EVERY FRI: Recording every Fri.
EVERY SAT: Recording every Sat.
MON-FRI: Recording from Mon. to
Fri.
MON-SAT: Recording from Mon. to
Sat.
SUN-SAT: Recording everyday from
Mon to Sat.
• The starting and stopping times for
the recording are displayed on the
12-hour (am/pm) clock. Twelve
o’clock midnight is displayed as “AM
12:00”, whereas twelve o’clock noon
is displayed as “PM12:00”.
• The initial setting of “REC TO” and
“REC MODE” can be changed using “REC SETUP” (See page 77)
• To switch over the selection item (hour or minute), press
or
, then press ENTER.
or
to adjust the time.
• Press
• After setting the time, press ENTER.
SETUP MENU
TIMER REC SET
TYPE
ONCE
DATE
20,08,03(--)
START
20:17
END
03:17
CH
000
REC TO
DVD
REC MODE
REC
REC
TO
MORE
XP
OK
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
Press
or
to select “END” and press ENTER.
7 Set
the stopping time in the same manner for setting the starting
time of timer recording.
8 •Press
Press
or
to select “CH” and press ENTER.
or
to select the channel to be recorded.
• You can select the external input (L1 or L2) by pressing
48
or
or
to select “REC TO” and press ENTER.
9 Press
Select the media (DVD or VCR) to be recorded from the list and
press ENTER.
10
Press
or
to select “REC MODE” and press ENTER.
The recording modes for the media selected in “REC TO” item
are listed up.
Select the recording mode and press ENTER.
For the recording modes in VCR, see page 38, and for the recording modes in DVD, see page 42.
48
VRDVD4005_P37-P50
END
03.8.21, 1:20 AM
Timer recording
SETUP MENU
TIMER REC SET
TYPE
ONCE
DATE
20,08,03(--)
START
20:00
END
21:30
CH
REC
REC
TO
MORE
06
REC TO
DVD
REC MODE
LP
OK
SELECT
ENTER/
SELECT
11
RETURN
ENTER
SETUP
BACK
END
Select “OK” and press ENTER.
The timer program is determined and the TIMER REC SET
screen appears again.
you enter the other program for the timer recording, re12 When
peat the steps 3 to 11.
13
Press SETUP.
The TIMER REC SET screen disappears and the display will
return to the normal screen.
14
Press TIMER REC. The timer indication ( ) will appear on the
display and the unit stands by for recording.
• If the program is DVD recording only, the unit will change to
VCR mode automatically. (The DVD mode cannot be selected.)
• If the program is VCR recording only, the unit will change to
DVD mode automatically. (The VCR mode cannot be selected.)
• If the programs are DVD and VCR recording, the unit will turn
off. If you want to use the unit, press TIMER REC again to
deactivate the timer.
Checking or changing the timer recording
NOTES:
• Recording starts 5 seconds before
the preset starting time.
• The total recording time for one time
is max. 23 hours and 59 minutes.
• You cannot use the timer recording
for the both DVD and VCR at the
same time.
• When the start time for timer recording comes in using the function of
REC/OTR explained in “Recording
a TV program” and “One touch
Timer Recording (OTR)”, the recording with REC/OTR is forcedly cancelled and the timer recording starts.
• You can playback the DVD during
the VCR timer recording, whereas
you can playback the VCR during
the DVD timer recording.
When you want to check the selected timer recording, follow the steps 1
& 2 of “Setting timer recording” and display the TIMER REC SET screen.
To change the timer recording, select the program to be changed and
press ENTER. The changing method is the same as that for the recording a program for the first time.
Canceling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press CLEAR/CANCEL,
then the selected program will be erased from the timer recording list.
In case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
8 : 00
9 : 00
10 : 00
11 : 00
Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Control Settings
Prog.1
Prog.2
Prog.3
49
VRDVD4005_P37-P50
49
03.8.21, 1:20 AM
Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity recording of MTS
STEREO TV broadcasts.
When a MTS STEREO broadcast is received, the word “STEREO” will appear on
the screen and the program can be viewed
or recorded in stereo.
The Hi-Fi STEREO recording procedure is
the same as for normal recordings.
STEREO
NOTE:
When using a CATV system, stereo TV programs may be transmitted
over a mono cable channel. In this case the word “STEREO” will not
appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO videotape, press AUDIO SELECT to select how
the audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
stereo broadcast or videotape audio is of poor quality. The “R” and “L”
positions allow the audio from the Right or Left Hi-Fi channel to be
heard over both TV speakers. This button has no effect when viewing
a MONO videotape or TV program. Each time when you press the
button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.
OUTPUT
SOUND HEARD ON BOTH
SELECTION SPEAKERS
STEREO
L ch
R ch
MONO
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
NOTES:
• When playing back a tape that is
not recorded in Hi-Fi stereo mode,
the audio will automatically be
monaural.
• When listening to a VHS Hi-Fi
video tape or MTS broadcast
through the RF OUT (UHF/VHF)
jack (Audio/Video cord not connected), the sound will be monaural.
50
VRDVD4005_P37-P50
50
03.8.21, 1:20 AM
Editing the disc
This section explains how to edit the
recorded DVD. Editing the disc
means editing the title menu. However, the items that you can edit vary
with the recording formats. In VR
mode, you can edit various title
menus, whereas in video mode, you
can edit only a few items.
Title menu
When you record a video first time on the DVD (in VR mode) where
nothing is recorded, the recorded content is automatically set to Title1.
Then, the second recorded content is set to Title2, and so on. Therefore, the title is numbered according to the recording order. The title
number will be created max. **.
The title menu lists up these title numbers.
The title menu can be used when you play back the disc, display the
menu you want to watch and play it back (see page 24), or when you
check the contents recorded on the disc.
Original title
The titles explained above are called original title, which will be added
every recording and can be edited later. You can do various editing
operations i.e., you can name the titles, or add and erase the chapter
marks. In addition, you can erase the unnecessary titles to increase
the disc space.
Play list title
You can create the play list based on the original title.
You can combine the titles or erase the unnecessary scenes.
The play list is created in regardless of the original titles and the list
won’t affect the original title. If you erase the play list, the original titles
remain. It is recommended to create and edit the play list to prevent
the important titles from being erased accidentally.
If you create the play list, both the original title and play list will be
displayed on the title menu.
Editable items
The items that can be edited are different between original title and
play list. For the disc in video mode, only the program name can be
edited and the play list cannot be created.
The items can be edited in each are as follows:
Editing items
NOTES:
• This unit cannot record or edit the
disc which was recorded or edited
using the other DVD recorder and
has chapter marks of *** or more.
• You cannot edit or record the disc
on which disc protection is set. In
such a case, be sure to cancel the
disc protection (see page 74) before starting the operation.
• When a scene was erased, the
selected position for erasing may
be a little different from the actual
erased position.
• The disc which was fully recorded
using the other DVD recorder may
not be edited by this unit.
Video mode
VR mode
Original
Play list
Original
Playback
Adding chapter mark
Combining chapters
Erasing scenes
Erasing titles
Renaming title program
Creating play list
Combining titles
If you finalize the disc in video mode, the title list will be created and
you cannot use the title menu.
51
VRDVD4005_P51-P68
51
03.8.20, 11:25 PM
Creating and editing a play list
Preparation:
You can create and edit the play
list based on the original title.
• Turn ON the TV and set to the video input mode.
• Load the recorded DVD-RW (VR).
Creating a play list
Press TITLE MENU.
1 The
title menu will appear.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:08:61AM
Title 2
LENGTH
:00:30:17
Title 3
CHANNEL
:06
08/11/2003 06:52AM -- XP
REC MODE :EP
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
TITLE
MENU
BACK
END
Press
or
to select the original title which will be used as the
2 base
of a play list.
3 Press
The original title editing menu will appear.
4 Press
or
to select “NEW PLAYLIST”.
TITLE MENU
DISC NAME:
Title 2
REC DATE :08/11/2003
PLAY
TIME
: 08:61AM
ADDLENGTH
CHAPTER MARK
: 00:01:17
Title 3
COMBINE CHAPTERS
08/11/2003 06:52AM -- XP
EDIT PROGRAM
Title 1
DELETE PROGRAM
RENAME PROGRAM
NEW PLAYLIST
PLAYLIST
NEW
SELECT
SET
ENTER.
5 Press
The editing menu closes and the created play list appears at the
bottom of the original title.
NOTE:
The play list can be created only in
the DVD-RW (VR). The DVD-RW
(Video) and the DVD-R cannot create a play list.
Created play list
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:06:42AM
Title 2
LLENGTH
:00:30:17
Title 3
CHANNEL
:06
08/11/2003 06:52AM -- XP
REC MODE :EP
Title 1 PL
52
VRDVD4005_P51-P68
52
03.8.20, 11:25 PM
Creating and editing a play list
Renaming the title menu
1 Press TITLE MENU to display the title menu.
the play list where you want to rename the program name.
2 Select
• Press
or
to select the play list.
to display the editing menu of the play list.
or
to select “RENAME PROG”.
• Press
• Press
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:03:12AM
Title 2
LLENGTH
:00:30:17
Title 3
CHANNEL
:06
08/11/2003 06:52AM -- XP
REC MODE :EP
Title 1 PL
PLAY
EDIT PROGRAM
DELETE PROGRAM
RENAME
RENAME PROGRAM
PROGRAM
TITLE COMBINE
SELECT
ENTER/
SELECT
SET
ENTER
RETURN
TITLE
MENU
BACK
END
ENTER.
3 Press
The keyboard screen will appear.
4 Use the keyboard screen to enter the program name.
Family
Letters
Return
Exit
Numbers
Signs
Display
OK
Back
Display
Clear
OK
stop
space bar
Caps
Press DISPLAY/CALL.
5 The
entered title is selected and then the display will return to the
title menu.
NOTES:
• The number of the characters
which can be used for the program
name is max. **.
• For using the keyboard screen,
see “Renaming the disc name”
(page 64).
• If the program name adopted in the
other DVD recorder has a character which cannot be displayed in
this unit, “*******” appears.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:03:12AM
Title 2
LLENGTH
:00:30:17
Title 3
CHANNEL
:06
08/11/2003 06:52AM -- XP
REC MODE :EP
Title 1 PL
Family
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
53
VRDVD4005_P51-P68
53
03.8.20, 11:48 PM
Creating and editing a play list
Erasing scenes (Edit program)
You can erase an unnecessary scene from the created play list.
When you erase the scene from the play list, the scene is not erased
from the original title.
1 Press TITLE MENU to display the title menu.
the play list where a scene you want to erase is included.
2 Select
• Press
or
to select the play list.
• Press
• Press
to display the editing menu of the play list.
or
to select “EDIT PROGRAM”.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
Title 2
Title 3
08/11/2003 06:52AM -- XP
TIME
:03:12AM
LLENGTH
:00:30:17
CHANNEL
:06
REC MODE :EP
Title 1 PL
Family
PLAY
EDIT PROGRAM
PROGRAM
EDIT
DELETE PROGRAM
RENAME PROGRAM
TITLE COMBINE
SELECT
ENTER/
SELECT
SET
ENTER
RETURN
BACK
TITLE
MENU
END
ENTER.
3 Press
The EDIT PROGRAM screen appears.
EDIT PROGRAM
NAME
Family
CHAPTER
LENGTH
1/3
00:00:00
00/00:30:17
Press
SELECT
to start
00:00:00
Preview
00:00:00
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
TITLE
MENU
END
ENTER to play back the play list on the EDIT PROGRAM
4 Press
screen.
NOTES:
• You can erase the scenes up to **
times for one title.
• The first and last * seconds of a
chapter mark cannot be selected
as part erasing (start or end)
points.
• The scene lasting less than * seconds cannot be erased.
• Use each operation button (F.FWD, REW, INDEX +, INDEX -,
PLAY, PAUSES/STEILL) for the playback to search the starting
point of the scene you want to erase.
EDIT PROGRAM
NAME
CHAPTER
LENGTH
Family
1/3
00/00:30:17
00:10:20
SET START
SET END
Finish
“SET START” at the start point of the scene that you want
5 Select
to erase and press ENTER. (To select the start point easily, search
the start point while “SET START” is selected)
The still image at the start point appears at the left small screen.
54
VRDVD4005_P51-P68
54
03.8.20, 11:25 PM
Creating and editing a play list
EDIT PROGRAM
NAME
Family
CHAPTER
LENGTH
2/3
00:11:42
00/00:30:17
Adjust start
SET END
Finish
00:08:28
Preview
00:30:17
SELECT
ENTER/
SELECT
ENTER
RETURN
TITLE
MENU
BACK
END
“SET END” at the end point of the scene you want to erase
6 Select
and press ENTER.
The still image at the end point appears at the right small screen.
EDIT PROGRAM
NAME
Family
CHAPTER
LENGTH
2/3
00:15:58
00/00:30:17
Adjust start
SET END
Finish
00:08:28
Preview
00:15:58
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
TITLE
MENU
END
the erased scenes.
7 Check
• Select “Preview” and press ENTER. Then the video where the
scenes between the start and end points are erased is played
back.
• Each operation button (F.FWD, REW, INDEX +, INDEX -, PLAY,
PAUSES/STEILL) for playback also can be used.
the start and end points.
8 Adjust
• To adjust the start point, select “Adjust start” and press ENTER.
You can change the start point every one second by pressing
or
• To adjust the end point, select “Adjust end” and press ENTER.
You can change the end point in the same way as the start point.
NOTE:
It is no problem to omit the procedures for confirming the scene or
adjusting sot and end points.
you determine the scene to be erased, select “Finish” and press
9 IfENTER.
55
VRDVD4005_P51-P68
55
03.8.20, 11:25 PM
Creating and editing a play list
Combining the title
You can create a play list by combining the several original titles.
To combine the titles, it is necessary to create a play list at first. By
combining the original titles in the play list, a play list where several
titles are combined is created.
1 Press TITLE MENU to display the title menu.
the play list where you want to combine the titles.
2 Select
or
to select the play list.
• Press
• Press
• Press
to display the editing menu of the play list.
or
to select “TITLE COMBINE”.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:03:29AM
Title 2
LENGTH
:00:01:50
Title 3
CHANNEL
:XP
08/11/2003 06:52AM -- XP
Title 1 PL
Family
REC MODE :-PLAY
EDIT PROGRAM
DELETE PROGRAM
RENAME PROGRAM
TITLE COMBINE
COMBINE
TITLE
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
TITLE
MENU
BACK
END
the original titles that you want to combine from the title
3 Select
menu.
TITLE MENU
DISC NAME:
REC DATE
TIME
LENGTH
CHANNEL
REC MODE
Title 1
Title 2
Title 3
08/11/2003 06:52AM -- XP
:08/11/2003
:06:44AM
:00:06:40
:-:EP
Family
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
ENTER.
4 Press
Following the play list, the original titles are combined.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
LENGTH
Title 2
:03:29AM
:00:36:40
CHANNEL :06
REC MODE :EP
Title 3
08/11/2003 06:52AM -- XP
Family
Title 1 PL
SELECT
ENTER/
SELECT
SET
RETURN
BACK
TITLE
MENU
END
The several titles were combined so that the total recording time is
displayed.
56
VRDVD4005_P51-P68
ENTER
56
03.8.20, 11:25 PM
Creating and editing a play list
Erasing a play list
You can erase the created play list. Even if you erase the play list, the
original title will not be erased.
1 Press TITLE MENU to display the title menu.
the play list that you want to erase.
2 Select
or
to select the play list.
• Press
• Press
• Press
to display the editing menu of the play list.
or
to select select “DELETE PROGRAM”.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:03:29AM
Title 2
LENGTH
:00:08:31
Title 3
CHANNEL
:XP
08/11/2003 06:52AM -- XP
REC MODE :--
Title 1 PL
PLAY
EDIT PROGRAM
DELETE PROGRAM
PROGRAM
DELETE
RENAME PROGRAM
TITLE COMBINE
SELECT
ENTER/
SELECT
SET
ENTER
RETURN
TITLE
MENU
BACK
END
ENTER.
3 Press
The following confirmation message will appear.
Question
Are you sure you want to delete
this title? if playlists exlst,
they will be deleted
Yes
No
Cancel
“YES” and press ENTER, then the play list will be erased.
4 Selecting
• Selecting “NO”, and then erasing the play list will be cancelled.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:06:52AM
Title 2
LENGTH
:00:03:07
Title 3
CHANNEL
:XP
08/11/2003 06:52AM -- XP
REC MODE :--
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
57
VRDVD4005_P51-P68
57
03.8.20, 11:25 PM
Editing original
Adding a chapter mark
The original titles can be edited
only in the DVD-RW (VR).
You can add a chapter mark to the original title. You can add up to 999
chapter marks to one title.
1 Press TITLE MENU to display the title menu.
the original title where a chapter mark is added.
2 Select
or
to select the original title.
• Press
• Press
• Press
to display the editing menu of the original.
or
to select “ADD CHAPTER MARK”.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
Title 3
TIME
:08:44AM
PLAY
:40
ADD CHAPTER MARK
08/11/2003 06:52AM -- XP
COMBINE CHAPTERS
Title 2
EDIT PROGRAM
Title 1 PL
DELETE PROGRAM
Title 2 PL
RENAME PROGRAM
NEW PLAYLIST
SELECT
ENTER/
SELECT
SET
ENTER
RETURN
BACK
TITLE
MENU
END
ENTER.
3 Press
The ADD CHAPTER MARK screen will appear.
ADD CHAPTER MARK
NAME
Title 2
CHAPTER
LENGTH
ENTER/
SELECT
1/4
00/00:45:10
ENTER
RETURN
BACK
TITLE
MENU
END
a scene where you want to play back the title and add the
4 Search
chapter mark.
• Search the scene by using each operation button (F.FWD, REW,
INDEX +, INDEX -, PLAY, PAUSES/STEILL, ONE TOUCH REPEAT, CM SKIP) for the playback.
NOTES:
• Set an interval of 5 seconds between the existing chapter mark
and the chapter mark to be added.
• You can automatically add a chapter mark in recording. For more information, see page 77.
ADD CHAPTER MARK
NAME
Title 2
CHAPTER
LENGTH
1/4
03/00:45:10
7%
ENTER/
SELECT
ENTER
RETURN
BACK
TITLE
MENU
58
VRDVD4005_P51-P68
58
03.8.20, 11:25 PM
END
Recording a TV program
the scene you want to add a chapter mark, press ENTER.
5 When
The playback is temporally stopped and the position of the added
chapter mark appears yellow.
ADD CHAPTER MARK
NAME
Title 2
CHAPTER
LENGTH
2/4
08/00:45:10
17%
The added chapter mark
6 If you continue to add a chapter mark, carry out the steps 4 & 5.
chapter marks is finished.
7 Adding
• To display the title menu, press RETURN.
• To return to the normal screen, press TITLE MENU.
Combining chapters
By erasing the added chapter marks, the chapters can be combined.
1 Press TITLE MENU to display the title menu.
the original titles where you want to combine the chapters.
2 Select
or
to select the original title.
• Press
• Press
• Press
to display the original editing menu.
or
to select “COMBINE CHAPTERS”.
TITLE MENU
DISC NAME:
Title 3
REC DATE :08/11/2003
PLAY
TIME
: 08:44AM
ADD CHAPTER MARK
:60
COMBINE CHAPTERS
08/11/2003 06:52AM -- XP
EDIT PROGRAM
Title 1 PL
DELETE PROGRAM
Title 2 PL
RENAME PROGRAM
Title 1
Title 2
NEW PLAYLIST
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
ENTER.
3 Press
The COMBINE CHAPTERS screen will appear. At the beginning,
the top still image in the chapter 1 is displayed.
59
VRDVD4005_P51-P68
59
03.8.20, 11:25 PM
Editing original
COMBINE CHAPTERS
6:41
NAME
Title 1
CHAPTER
LENGTH
ENTER/
SELECT
2/3
08/00:01:50
ENTER
RETURN
BACK
TITLE
MENU
END
4 Press INDEX + or INDEX - to select the chapter marks to be erased.
ENTER.
5 Press
The chapter marks are erased and 2 chapters are combined into 1
chapter.
6 To continue erasing the chapter marks, carry out the steps 4 & 5.
chapter combination will be completed.
7 The
• To display the title menu, press RETURN.
• To return to the normal screen, press TITLE MENU.
Renaming program name
You can erase an unnecessary scene from the original program.
Erase the scene after checking the program items. You cannot reproduce the erased scene.
1 Press TITLE MENU to display the title menu.
the original program that you want to rename.
2 Select
or
to select the original program.
• Press
• Press
• Press
to display the original editing menu.
or
to select “RENAME PROGRAM”.
TITLE MENU
DISC NAME:
Title 3
REC DATE :08/11/2003
PLAY
TIME
: 08:61AM
ADDLENGTH
CHAPTER MARK
: 00:01:60
COMBINE CHAPTERS
08/11/2003 06:52AM -- XP
EDIT PROGRAM
Title 1 PL
DELETE PROGRAM
Title 1
Title 2
RENAME
RENAME TITLE
PROGRAM
Title 2 PL
NEW PLAYLIST
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
ENTER.
3 Press
The keyboard screen appears.
The entering method of the program name is the same as for the
play list. See the steps 4 & 5 of “Renaming the program name” in
“Editing a play list” and enter the program name.
60
VRDVD4005_P51-P68
60
03.8.20, 11:25 PM
Editing original
Erasing a scene (Edit program)
You can erase an unnecessary scene from the original title.
Erase the scene after checking the title items. You cannot reproduce
the erased scene.
1 Press TITLE MENU to display the title menu.
the original program that you want to rename.
2 Select
or
to select the original program.
• Press
• Press
• Press
to display the original editing menu.
or
to select “EDIT PROGRAM”.
TITLE MENU
DISC NAME:
REC DATE
PLAY
TIME
ADDLENGTH
CHAPTER
Title 1
:08/11/2003
Title 3
:08:61AM
MARK
:00:01:17
COMBINE CHAPTERS
08/11/2003 06:52AM -- XP
EDIT
EDIT PROGRAM
PROGRAM
Title 1 PL
DELETE PROGRAM
Title 2
RENAME PROGRAM
Title 2 PL
NEW PLAYLIST
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
3 By pressing ENTER, the following message screen will appear.
Question
Are you sure you want to delete
this title? if playlists exlst,
they will be deleted
Yes
No
Cancel
“YES” and press ENTER, then the EDIT PROGRAM screen
4 Select
will appear.
• By selecting “NO”, the title menu appears.
method for erasing a scene is the same as for the play list.
5 The
See the steps 4 to 10 of “Erasing a scene (Edit program)” in “Editing a play list”.
61
VRDVD4005_P51-P68
61
03.8.20, 11:26 PM
Editing original
Erasing the original program
You can erase the original program.
Erase the original program after checking its items. The erased program cannot be reproduced.
When you erase the programs, you can increase the disc space.
1 Press TITLE MENU to display the title menu.
the original title you want to erase.
2 Select
or
to select the program.
• Press
• Press
• Press
to display the original editing menu.
or
to select “DELETE PROGRAM”.
TITLE MENU
DISC NAME:
REC DATE :08/11/2003
Title 1
TIME
:08:61AM
:00:01:17
Title 3
LENGTH
PLAY
08/11/2003 06:52AM -- XP
ADD CHAPTER MARK
Title 1 PL
COMBINE CHAPTERS
Title 2 PL
EDIT PROGRAM
Title 2
DELETE TITLE
PROGRAM
DELETE
RENAME PROGRAM
NEW PLAYLIST
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
3 The following message screen appears by pressing ENTER.
Question
Are you sure you want to delete
this title? if playlists exlst,
they will be deleted
Yes
No
Cancel
“YES” and press ENTER, then the program will be erased.
4 •Select
Erasing the title will be cancelled by selecting “NO”.
NOTE:
By erasing the original program, the
same program will also be erased
from the play list.
62
VRDVD4005_P51-P68
62
03.8.20, 11:26 PM
Renaming a disc name
Preparation:
You can rename a disc name from
the title menu. In addition, to initialize a disc, the disc name can
be entered.
• Turn ON the TV and set to the video input mode.
• Load the recorded disc.
Renaming a disc name
1 By pressing TITLE MENU, display the title menu.
or
to select “DISC NAME”.
2 •• Press
to display the editing menu.
Press
• Press
or
to select “RENAME DISC”.
TITLE MENU
DISC NAME
PLAY
RENAME DISC
LENGTH
Title 1
Title 2
CHANNEL
Title 3
REC MODE :
08/11/2003 06:52AM -- XP
Title 1 PL
Title 2 PL
SELECT
ENTER/
SELECT
SET
ENTER
RETURN
TITLE
MENU
BACK
END
ENTER.
3 Press
The keyboard screen will appear.
4 Use the keyboard screen to enter the program name.
Drama_Family
Return
Exit
Letters
Numbers
Signs
Display
OK
Back
Display
Clear
OK
stop
space bar
Caps
Press DISPLAY/CALL.
5 The
entered program name is determined to display the title menu.
NOTES:
• The number of the characters which
can be used for the disc name is
max. **.
• For using the keyboard screen, see
“Using the keyboard screen” (page
64).
• If the disc name adopted in the other
DVD recorder has a character which
cannot be displayed in this unit,
“*******” appears.
TITLE MENU
DISC NAME:Drama_Family
REC DATE
TIME
LENGTH
CHANNEL
REC MODE
Title 1
Title 2
Title 3
08/11/2003 06:52AM -- XP
Title 1 PL
Title 2 PL
SELECT
ENTER/
SELECT
ENTER
SET
RETURN
BACK
TITLE
MENU
END
63
VRDVD4005_P51-P68
63
03.8.20, 11:26 PM
Renaming a disc name
Character input 2
Example: Explain here the procedure when you input
“F” and “J”.
Using the keyboard screen
This section explains the function of the keyboard
screen and how to input characters. The disc name ant
the program name can be renamed using the keyboard
screen.
the numerical keys where a character you
1 Press
want to input is assigned.
Keyboard screen types
The keyboard screen has three types of “Letters”, “Numbers” and Signs”. The type can be switched over by
pressing REW or F.FWD.
Letters:
This is mainly used for inputting alphabetical letters.
For the keyboard screen of Letters, see the
previous page.
Numbers: This is used for inputting numbers.
the numerical keys continuously and select
2 Press
the character to be input.
To input F, press 3 twice.
Live Show
Letters
Return
Exit
Numbers
Clear
Signs
Back
Display
Display
Done
Done
NOTE:
When the interval between the pressing numerical keys
is 2 seconds or more in selecting the input character,
the then selected character will automatically be input.
the key operation when you select the char3 Stop
acter to be input.
The selected character will automatically be input.
Signs:
This is used for inputting symbols.
Live Show
Letters
Return
Exit
Numbers
Signs
Display
Done
¨
·
‘
Back
Display
Clear
Done
:·)
:·(
NOTE:
After input one character, another character will not be
input automatically until another character is selected.
:·{
:·}
the numerical keys where the following char4 Press
acter is assigned.
space bar
Inputting characters
There are two methods for inputting characters.
the character to be input is selected, stop
5 When
the key operation.
or
to select the character to
FJ
Press ENTER.
2 The
selected character will be input.
64
VRDVD4005_P51-P68
The selected character is automatically input.
Character input 1
Press
1 be
input.
64
03.8.20, 11:26 PM
Renaming a disc name
one among the following items in the list
2 Select
and press ENTER.
Erasing a character
You can erase the input character.
Erasing method 1
1 Press
or
and select “Back”.
ENTER.
2 Press
The last input character will be erased.
Auto Caps: Determines uppercase and lowercase automatically.
Upper:
Inputs all with uppercase letters.
Lower:
Inputs all with lowercase letters.
Determining a name
the characters continuously, press ENTER.
3 ToTheerase
input characters will be erased from the last to
the top one by one.
Erasing method 2
Press CLEAR.
1 The
last input character is erased.
To determine the entered disc name and program name,
press DISPLAY/CALL.
Or select “Ok” and press ENTER.
The keyboard screen disappears and the display will
return to the title menu.
The entered disc name and program are displayed in
the title menu.
Canceling character input
erase the characters continuously, press
2 ToCLEAR.
When you want to cancel the input and changed characters, press RETURN.
Or select “Exit” and press ENTER.
The input and changed characters are cancelled and
the title menu will appear.
The input characters will be erased from the last to
the top one by one.
Erasing method 3
Use the cursor to select the character and erase it.
Press INDEX - or INDEX + to move the cursor af1 ter
the character you want to erase.
Press CLEAR.
2 Erase
the character before the cursor position.
Selecting between uppercase and lowercase
letters
You can select the alphabets between uppercase and
lowercase letters, which can be input on the keyboard
screen of Letters.
STOP.
1 Press
Select “•” or “Caps” and press ENTER.
Live Show
Letters
Return
Exit
Numbers
Signs
Display
OK
space bar
Clear
Back
Display
9 AUTO CAPS
y UPPER
LOWER
stop
OK
Caps
65
VRDVD4005_P51-P68
65
03.8.20, 11:26 PM
Dubbing a tape onto a disc
Preparation:
You can record video or audio on
a video tape onto a disc.
• Turn ON the TV and set to the video input mode.
• Load a source video tape and a disc for recording.
• Set the erase-protection tab of the source video tape to prevent the
data from accidentally being erased.
• Confirm the disc space before operation.
DVD/VCR to set this unit to DVD mode.
1 Press
The DVD mode lamp comes on.
REC MODE and select the recording mode.
2 Press
• When REC MODE is pressed each time, “SP”, “LP”, “SLP” or
“XP” is selected in this order.
• The recording mode is indicated on both the TV screen and the
display window.
• For the details of the recording mode, see page 42.
3 Press DVD/VCR and set the unit to VCR mode.
NOTE:
Confirm that the VCR mode lamp stays on.
DUBBING.
4 Press
• By pressing DUBBING, the DVD mode is selected.
• The VCR is waiting for playback and the DVD is waiting for recording. Then the following message will appear.
“YES” and press ENTER.
5 Select
Dubbing starts.
TO CONFIRM DUBBING VCR -> DVD
• To stop dubbing, select “NO” and
press ENTER.
YES
NO
recording, VCR playback, DVD recording and “dub” (dubbing)
6 Inappear
on the display window.
NOTES:
Dubbing cannot be carried out when
• the copy guard supporting tape is
used.
• disc protection is set.
• disc has no recording space.
Dubbing stops when
• the video tape is played back to
the end and stops.
• recording space becomes full.
Copyright
• The videos recorded from the TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
Video playback
Dub
7 To stop dubbing, press STOP.
66
VRDVD4005_P51-P68
66
03.8.20, 11:26 PM
DVD recording
Dubbing a disc onto a tape
Preparation:
You can record video or audio on
a disc onto a video tape. When the
disc with a copy guard function
is used, a disordered image is recorded on the video tape.
• Turn ON the TV and set to the video input mode.
• Load a source disc and a video tape for recording.
• Confirm the remaining tape for recording before operation.
1 Press DVD/VCR to set this unit to VCR mode.
The VCR mode lamp comes on.
REC MODE/SPEED and select the recording mode.
2 Press
• When REC MODE is pressed each time, “SP” or “SLP” is selected.
• The recording mode is indicated on both the TV screen and the
display window.
• For the details of the recording mode, see page 38.
3 Press DVD/VCR and set the unit to DVD mode.
NOTE:
Confirm that the DVD mode lamp stays on.
DUBBING.
4 Press
• The DVD is waiting for playback and the VCR is waiting for recording. Then the following message appears.
NOTES:
Dubbing cannot be carried out when
• the copy guard supporting tape is
used.
Dubbing stops when
• the disc is played back to the end
and stops
• no recording space in vide tape
becomes remained.
Copyright
• The videos recorded from the TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
“YES” and press ENTER.
5 Select
Dubbing starts.
TO CONFIRM DUBBING DVD->VCR
• To stop dubbing, select “NO” and
press ENTER.
YES
NO
recording, DVD playback, VCR recording and “dub” (dubbing)
6 Inappear
on the display window.
Video recording
Dub
DVD playback
stop dubbing, press STOP.
7 ToWhen
DVD is played back, “ ” mark is displayed by the auto resume function. By pressing STOP once more or removing the disc
from the unit, the auto resume condition is cancelled.
Dubbing only the special programs or the play list
When you want to dub only the special programs or the play list recorded on the disc, play back the program or the
play list you want to dub using the title menu, and immediately press one of DUBBING, STOP or PAUSE/STILL.
When you press DUBBING, proceed the steps 5 and after above, and when you press STOP or PAUSE/STILL,
proceed the steps 4 and after above. However, a few seconds at the first part of the video may not be recorded.
When playback of the program or the play list selected is completed, the dubbing stops.
67
VRDVD4005_P51-P68
67
03.8.20, 11:26 PM
Dubbing video or audio by connecting other equipment
You can connect the other VCR or comcorder to dub video or audio.
Typical connection: When using this unit as a recording device
Playback VCR
Playback Camcorder
To AV Jack
To Video OUT
To Audio (R) OUT
Recording VCR
To Audio (L) OUT
AUDIO/VIDEO Cord (supplied)
Recording VCR
To Video IN
To Audio (R) IN
To Audio (L) IN
AUDIO/VIDEO Cord (not supplied)
To Video IN
To Audio (R) IN
To Audio (L) IN
You can connect to the audio/video input jack (L1) at the rear side of
this unit. In addition, each S video input jack at the front and rear sides
and an S video output jack is at the rear side of the unit so that they
can be used for recording on the disc.
When a video is recorded using this unit
Preparation:
• Turn ON the TV and set the unit to the video input mode.
• Load a video tape where the erase-protection tab is not activated or
a disc with enough recording space.
• To record onto a video tape, set the unit to VCR mode, whereas to
record onto a disc, set it to DVD mode.
INPUT SELECT and set the channel to L2 (or L1).
1 Press
Confirm that L2 (or L1) appears on the display window.
NOTES:
• When this unit is used as a playback device, a mark or a character displayed on the screen is also
dubbed as an image. When the
screen display is set to OFF, see
“Selecting the screen display” on
page 74.
• The videos recorded from the TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
• The copy guard supporting tape
cannot be used for dubbing.
REC MODE/SPEED and select the recording mode.
2 Press
VCR: SP or SLP (See page 38)
DVD: SP, LP, SLP or XP (See page 42)
3 Press REC/OTR on the recording VCR, then press PAUSE/STILL.
the PLAY button on the playback VCR or CAMCORDER,
4 Press
then press the PAUSE/STILL button.
the recording pause and the playback still simultaneously
5 Release
to begin the duplicating process.
6 To stop dubbing, press STOP.
68
VRDVD4005_P51-P68
68
03.8.20, 11:26 PM
SETUP MENU
The SETUP MENU consists of several menus where
you can make various settings concerning language, audio functions, and images. In addition, this
menu includes a clock, channel and other things
that require setting just after purchase.
For details of each menu, see the corresponding
section in this chapter.
or to choose the submenu you want to
3 Press
select and press ENTER.
The setting screen of the selected submenu will
appear.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEMOSD
SETUP
LANGUAGE
ENGLISH
Using the SETUP MENU
AV SETUP
DVD MENU
ENGLISH
AUDIO
REC SETUP
ENGLISH
The following example shows the basic setting procedure of the SETUP MENU. The remote control keys
that can be operated in the SETUP MENU mode is displayed at the bottom of the screen.
SUBTITLE
CH SETUP
ENGLISH
OTHER
SET
ENTER/
SELECT
ENTER
9 INPUT A NUMBBER
RETURN
BACK
SELECT
SETUP
END
or
to choose the item you want to se4 Press
lect and press ENTER.
Selectable items will be listed.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEMOSD
SETUP
LANGUAGE
ENGLISH
AV SETUP
DVD MENU
ENGLISH
AUDIO
REC SETUP
ENGLISH
SUBTITLE
CH SETUP
Press SETUP while the DVD or video tape is
1 stopped.
ENGLISH
ENGLISH
FRANCAIS
ESPANOL
OTHER
AUTOMATIC
OFF
OTHER
The SETUP MENU screen will appear.
SETUP MENU
SET
ENTER/
SELECT
TIMER REC SET
SYSTEM SETUP
Press or
5 ENTER.
AV SETUP
REC SETUP
CH SETUP
9 INPUT A NUMBBER
RETURN
BACK
SELECT
SETUP
END
to choose the desired item and press
This completes the setting procedure.
• To return to the previous screen, press RETURN.
• To close the SETUP MENU, press SETUP.
OTHER
SELECT
ENTER/
SELECT
ENTER
ENTER
RETURN
BACK
SETUP
END
or
to choose the menu you want to
2 Press
select and press ENTER.
NOTE:
For items that require different operations from the basic setting procedure, the setting procedure is described
in each individual section.
The submenu screen of the selected menu will appear.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEM SETUP
PARENTAL
AV SETUP
CLOCK
REC SETUP
DISC SETUP
CH SETUP
OTHER
OTHER
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
69
VRDVD4005_P69-P86
69
03.8.20, 11:27 PM
Setting the language
You can choose the language of the menu screen,
DVD menu, DVD audio and subtitles.
Selectable languages:
Preparation:
ENGLISH, FRANCAIS, ESPANOL
The language you have selected will play if it is recorded on the disc.
• Turn ON the TV and set it to the video input mode.
• Select “LANGUAGE” from “SYSTEM SETUP”. For
the procedure, see steps 1 to 3 in “Using the SETUP
MENU”.
ORIGINAL
The unit will select the first priority language of each
disc.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEMOSD
SETUP
LANGUAGE
ENGLISH
AV SETUP
DVD MENU
ENGLISH
AUDIO
REC SETUP
ENGLISH
SUBTITLE
CH SETUP
ENGLISH
OTHER
SET
ENTER/
SELECT
ENTER
9 INPUT A NUMBBER
RETURN
BACK
SELECT
SETUP
END
OSD language
You can set the language for on screen display.
Select “OSD LANGUAGE” and select the language from
the list below.
OTHER
If you want to select another language, enter the language code (see the Language code list on page ***).
NOTE:
If the selected language is not recorded on the disc,
the first-priority language is selected.
Subtitle
When several subtitles languages are recorded on DVD,
you can select the language to be used for the subtitles. The selected language remains effective after the
power is turned off or the disc is replaced.
Select “SUBTITLE” and select the menu language from
the list below.
Selectable languages:
Selectable languages:
ENGLISH, FRANCAIS, ESPANOL
DVD menu
When several menu languages are recorded on a DVD,
you can select the language to be used for the DVD
menu.
Select “DVD MENU” and select the language from the
list below.
Selectable languages:
ENGLISH, FRANCAIS, ESPANOL
The selected language is the first priority menu language.
OTHER
Other languages can be selected (see the Language
code list on page ***).
Audio
When several audio languages are recorded on a DVD,
you can select the audio language to be played back.
The selected language remains effective after the power
is turned off or the disc is replaced.
Select “AUDIO” and select the audio language from the
list below.
ENGLISH, FRANCAIS, ESPANOL
The subtitle is displayed with the selected language
if it is recorded on the disc.
OTHER
If you want to select another language, enter the language code (see the Language code list on page ***).
AUTO
• The unit will automatically select the same language in the AUDIO setting.
• When the unit selects the same language as the
AUDIO setting, the subtitles will not appear during playback.
• When you do not use the same language as the
AUDIO setting, the subtitles will appear during
playback.
OFF
Subtitles do not appear.
NOTE:
If the selected language is not recorded on the disc,
the first-priority language is selected.
70
VRDVD4005_P69-P86
70
03.8.20, 11:27 PM
Selecting and cancelling of parental control
Some discs are specified as not suitable for children. This unit can prevent playback of such discs.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “PARENTAL” from “SYSTEM SETUP”. For the
procedure, see steps 1 to 3 in “Using the SETUP
MENU”.
NOTE:
• The selected level will apply to operations executed
after this.
• The unit cannot restrict playback of some discs.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult”.
Parental control will not work with those discs.
• Do not forget the password. If you forget the password, contact customer service.
SETUP MENU
TIMER REC SET
Temporarily canceling parental control
PARENTAL
SYSTEM SETUP
PASSWORD
- - - -
AV SETUP
PARENTAL
Parental control can temporarily be cancelled with some
DVDs.
REC SETUP
CH SETUP
1 Playback a DVD. (See page 23.)
OTHER
ENTER/
SELECT
ENTER
CLLAR/
9 INPUT A NUMBBER CANCEL
RETURN
BACK
SETUP
DELETE
END
Selecting parental control
the DVD disc has been designed to temporarily
2 Ifcancel
the rating level, the screen that follows the
“READING” screen will change. If you select “YES”
with the ENTER, the message “Your disc exceeds
parental control level 1.”(e.g.) will then appear.
Select PARENTAL and select the parental control level
from the list below.
Your disc exceeds
the parental control level 1.
Level Off:
Level 1:
Parental control is turned off.
DVD expressly for children can be
played back.
Level 2 to 7: DVD for general/children can be
played back.(DVDs with mature content are prohibited.)
Level 8:
All DVD software can be played back.
Select from level 1 to level 8.
On a scale of 1- 8, “1” is the most restrictive.
To lock the selected parental control level
lock the selected parental control level, press
1 To and
choose “PASSWORD”.
the numeric keys to input the 4-digit pass2 Use
word.
• If you input a wrong number, press CANCEL.
• Be sure to remember this number!
3 Press ENTER.
1234
change to
----
Parental Control Level
Cancel Picture
/Enter/Return
you wish to cancel the set rating level tempo3 Ifrarily,
select “Parental Control Level” with
or ,
then press ENTER. If the password has been selected, the password input screen will appear.
Alternatively, if the password has not been set, playback will commence. If you don’t know (or have forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
the numeric keys to input the password.
4 Use
• To interrupt the input process, press RETURN.
5 Press ENTER.
To cancel the locked parental control level
will commence if the entered password
6 Playback
“PASSWORD” shown in step 1 of the above
was correct.
1 Select
section and use the numeric keys to input the
password.
ENTER.
2 Press
The locked mark “
” will change to an unlocked
mark “ ”.
Then, you can change the parental control level.
VRDVD4005_P69-P86
71
NOTE:
This temporary cancellation of the rating level will remain active until the disc is ejected.
When the disc is ejected, the original rating level will be
set again automatically.
71
03.8.20, 11:28 PM
Setting the clock
The clock is set to the correct time automatically,
but it can also be set manually. The clock can be set
for daylight saving time and time zone.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “Clock” from “SYSTEM SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU”.
SETUP MENU
TIMER REC SET
CLOCK
SYSTEM SETUP
CLOCK SET
NOTE:
• If power is lost or the power plug is disconnected for
30 minutes or longer, the built-in clock is reset. In such
case, set the clock manually or set the AUTO CLOCK
function to “ON” and set the clock automatically.
STANDARD TIME (Time zone)
In the rare event that you live within the broadcast range
of two stations in two different time zones, the DVD/
VCR may recognize the wrong station for the Auto Clock
set. To correct the situation:
02:24 11/08/03
AV SETUP
AUTO CLOCK
REC SETUP
STANDARD TIME
CH SETUP
DAYLIGHT SAVING TIME
Select “STANDARD TIME” and select the time zone from
the list below.
ON
HAWAII
ON
OTHER
Selectable time zones and correction times
SET
ENTER/
SELECT
ENTER
9 INPUT A NUMBER
RETURN
BACK
SELECT
SETUP
END
CLOCK SET (manually)
You can manually set the present time, date and year
with the remote control.
Ex. :Setting the clock to “10:20” September, 15th, 2003.
1 Select “CLOCK SET” and press ENTER.
01:01 01 / 09 / 03
the desired items using
2 Select
minute, date, month and year).
or
(hour,
or to set the value of the selected item.
3 •Press
or
once to set the
For the minutes, press
time minute by minute, or hold down either of
buttons for several seconds to set the time in 10minute intervals.
01:01 15
01 / 09 / 03
steps 2 and 3 to set the present time, date
4 Repeat
and year, and press ENTER.
10 :20 15 / 09 / 03
This completes clock time setting.
AUTO CLOCK
You can automatically set the clock by turning “ON” the
AUTO CLOCK function. The default setting is “ON” so
that the clock is automatically set as described in “Auto
clock setting” (See page**)
When you want to set the AUTO CLOCK function to
“OFF”, select “AUTO CLOCK”, press ENTER and select “OFF” from the list.
ATLANTIC: GMT – 4 hours
(GMT: Greenwich Mean Time)
EASTERN: GMT – 5 hours
CENTRAL: GMT – 6 hours
MOUNTAIN: GMT – 7 hours
PACIFIC:
GMT – 8 hours
ALASKA: GMT – 9 hours
HAWAII:
GMT – 10 hours
AUTO:
AUTO SET
NOTES:
• When shipped from the factory, the “TIME ZONE”
option is set to “AUTO”.
• After making the auto clock setting, in some cases
the clock may display another time zone. You can correct the clock by selecting your time zone setting
above.
• When the clock is not set or you set the clock manually, the time zone setting is not available.
DAYLIGHT SAVING TIME
You can set the clock to daylight saving time.
To select daylight saving time, select “DAYLIGHT SAVING TIME” and select “ON”, while to cancel the daylight saving time, select “OFF”.
ON: Forward one hour
OFF: Back one hour
NOTES:
• When you want to set daylight saving time, on the
first unday in April you set it to “ON”, and on the last
Sunday in October you set it to “OFF”.
• When shipped from the factory, the “DAYLIGHT SAVING TIME” option is set to “OFF”.
• When the clock is not set, the daylight saving time
setting is not available.
• When there is no daylight saving time in your area,
always select “OFF”.
72
VRDVD4005_P69-P86
72
03.8.20, 11:28 PM
Disc setup and operation
You can format, protect or finalize the disc.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “DISC SETUP” from “SYSTEM SETUP”. For
the procedure, see steps 1 to 3 in “Using the SETUP
MENU”.
SETUP MENU
TIMER REC SET
DISC SETUP
SYSTEM SETUP
REFORMAT DVD VIDEO
PROCEED
AV SETUP
REFORMAT DVD VR
PROCEED
REC SETUP
BLANK FORMAT
CH SETUP
FINALIZE
PROCEED
OTHER
PROTECT DISC
PROCEED
UNDO FINALIZE
PROCEED
VR
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
REFORMAT
You can format a recorded DVD-RW.
Check the content of the disc before format. If you format the disc, the recorded content of the disc will be
erased.
To format a DVD in the video mode, select “REFORMAT AS DVD VIDEO”, and to format it in the VR mode,
select “REFORMAT AS DVD VR”.
The screen below will appear.
Format
Label
Edit labe
default name
Format
Cancel
NEW DISC FORMAT
If you insert a blank DVD-RW, the disc is automatically
format.
Select “NEW DISC FORMAT” and select the mode to
be used for automatic format from the list below.
VR:
format the DVD in the VR mode.
Video: format the DVD in the video mode.
NOTE:
The automatic format is effective only for Ver. 1.1 or
later DVD-RW.
FINALIZE
When you finalize the disc recorded or edited by this
unit, you can playback the disc on other DVD players.
When “FINALIZE” is selected, the screen below will appear.
NOTES:
• The finalization time is between a few minutes and
about an hour. The required time varies according to
disc type or the amount of free space on the disc.
• You can record or edit a DVD-RW (in VR mode) finalized by this unit in the usual fashion, but you cannot
do these operations with a DVD-RW (in video mode)
or DVD-R.
• For a DVD-RW (in VR mode) which was finalized by
another unit, you can record or edit on this unit by
canceling the finalization.
• You cannot playback a disk recorded on VR mode on
a unit that does not support DVD-RW.
• Even if you finalize a disc in the video mode, the disc
cannot be played back in some DVD players.
• You cannot watch video screen images during finalization.
• When you select “Format” and press ENTER, format
will start.
• When you select “Cancel” and press ENTER, the DISC
SETUP screen will appear.
• If you want to name the disc, select “Edit label” and
press ENTER. The disc name input screen will appear.
For disc name input, see page**.
NOTES:
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a protected disc.
• You cannot watch video screen images during format.
73
VRDVD4005_P69-P86
73
03.8.20, 11:28 PM
Disc setup and operation / other (SYSTEM SETUP)
PROTECT DISC
You can protect a disc to prevent the content recorded
on it from being erased, edited or re-recorded.
Only DVD-RW (in VR mode) can be protected.
Select “PROTECT DISC” and select “ON” to protect the
disc.
To cancel the disc protection, select “OFF”.
NOTES:
• Some discs may require about 2 minutes for the protection process.
• You cannot format a disc where the disc protection is
“ON”.
You can turn the display window and screen display “ON” or “OFF”.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “OTHER” from “SYSTEM SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU”.
SETUP MENU
TIMER REC SET
LANGUAGE
OTHER
SYSTEM SETUPDIMMER
PARENTAL
AV SETUP
AUTOMATIC
DISPLAY/CALL CLOCK
REC SETUP
DISC SETUP
CH SETUP
OTHER
ON
OTHER
UNDO FINALIZE
You can cancel the finalization of a DVD-RW (in video
mode) finalized by this unit and a DVD-RW (in VR mode)
finalized by another unit.
You cannot cancel the finalization for discs other than
above. You can record or edit on a disc whose finalization has been cancelled.
Select “UNDO FINALIZE”, and the screen below will
appear.
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
DIMMER (Turning the display window
“ON” or “OFF”)
Set the brightness of the display window from the front
panel of this unit.
Select “DIMMER” and select the display window status
from the list below.
Finalizing
19%
• When you choose No and press “ENTER”, the previous screen will appear.
• When you choose Yes and press “ENTER”, the finalization will be cancelled.
NOTES:
• Some discs may require about ** minutes for the canceling finalization process.
• When the disc’s finalization cannot be cancelled, you
cannot choose “UNDO FINALIZE”.
AUTOMATIC: The window appears bright. When no
operation is carried out for a while, the
window will become dark to reduce
power consumption.
DIM:
The window always appears dark.
OFF:
The window display is turned OFF.
DISPLAY / CALL (Selecting the
screen display)
You can turn off the screen display of the clock or counter
that is output to the TV screen by this unit. Select “DISPLAY/CALL”, and select “ON” or “OFF”.
ON: The screen display can appear.
OFF: Nothing but the SETUP MENU and error messages can be displayed.
74
VRDVD4005_P69-P86
74
03.8.20, 11:28 PM
Turning on the screen display
This section describes settings about movie playback.
STILL BY FRAME
An image is displayed on the screen from when the
unit is paused.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “AV SETUP 1” from “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU”.
SETUP MENU
TIMER REC SET
AV SETUP 1
SYSTEM
SETUP
TV SCREEN
4:3 Pan Sean
AV SETUP
STILL MODE
AUTOMATIC
NOISE BACKGROUND
RECNO
SETUP
ON
EXTERNAL VIDEO INPUT
CH SETUP
AUTOMATIC
OTHER
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
NOTE:
When the pause is maintained for a long time and the
same image has been displayed, the TV screen may
be fatally damaged. It is recommended to use the default setting (AUTOMATIC) as it is for the STILL MODE.
NO NOISE BACKGROUND
When you select a channel where the broadcast has
finished or no broadcast is set, the TV screen will automatically appear blue.
The function above works when you select “NO NOISE
BACKGROUND” and select “ON” from the list. If you
don’t want to use this blue background function, select
“OFF”.
The default setting is “ON”.
EXTERNAL VIDEO INPUT
TV SCREEN
You can select the TV screen size to suit the screen
image.
Select “TV SCREEN” and select screen size from the
list below.
This unit comes with an S-video input terminal and pin
plug type (COMPOSITE) terminal as video input terminals. If both terminals are used, the priority terminal
can be selected.
Select “EXTERNAL VIDEO INPUT” and select the mode
from the following list.
4:3 Letter Box
Select this mode when connecting to a conventional
TV. When playing back a wide screen DVD disc, it
displays a wide picture with black bands at the top
and bottom of screen.
AUTOMATIC
The S-video input terminal has priority. This is the
default setting.
4:3 Pan Scan
It displays a wide picture across the whole screen
with left and right edges automatically cut off.
COMPOSITE VIDEO
The composite video input has priority.
16:9 Wide
Select this mode when connecting to a wide-screen
TV.
A wide-screen picture is displayed in full size.
NOTE:
If the DVD disc is not formatted in the pan scan format,
it displays a 4:3 aspect ratio.
STILL MODE
You can set the type of image displayed on the TV
screen when the playback of the DVD is paused.
Select “STILL MODE” and select the image to be displayed from the list below.
AUTOMATIC
When the pause is maintained for a long time, the
image display will turn off. When you cancel the pause,
the movie plays back as usual.
75
VRDVD4005_P69-P86
75
03.8.20, 11:28 PM
Adjusting audio
This section describes image quality settings.
This section describes audio settings.
Preparation:
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “AV SETUP 2” in “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU”.
• Turn ON the TV and set it to the video input mode.
• Select “AUDIO” from “AV SETUP”. For the procedure,
see steps 1 to 3 in “Using the SETUP MENU”.
SETUP MENU
SETUP MENU
TIMER REC SET
TIMER REC SET
AUDIO
SYSTEM SETUP
DRC
AV SETUP 2
MAX
AV SETUPVIRTUAL SURROUND
SYSTEM SETUP
BRIGHTNESS
STD
AV SETUP
DNR
MIN
ON
EXTERNAL AUDIO INPUT
REC SETUP
STEREO
SAP
CH SETUP
REC SETUP
OFF
OTHER
CH SETUP
OTHER
SELECT
ENTER/
SELECT
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
ENTER
RETURN
BACK
SETUP
END
END
DRC
BRIGHTNESS
You can control the brightness level of the image.
Select “BRIGHTNESS” and select the level from the
list below.
MAX:The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
DNR
You can adjust the digital noise reduction function that
reduces screen noise during playback.
Select “DNR” and select the level from the list below.
MAX: Uses the max. DNR effect.
STD: Uses a DNR effect at the middle level between
MAX and MIN.
MIN: Uses the min. DNR effect.
OFF: Default setting. DNR is not used.
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Select “DRC” and select the level from the list below.
MAX: Full dynamic range is increased.
STD: Full dynamic range is maintained.
MIN: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD.
VIRTUAL SURROUND (Spatializer N2-2TM)
Sound that is not recorded in the surround mode will
be changed to artificial surround sound and output.
Select “VIRTUAL SURROUND” and select “ON” from
the list to activate the virtual surround function. To not
use the virtual surround, select “OFF”.
The default setting is “OFF”.
EXTERNAL AUDIO INPUT
The audio mode for the audio input terminal can be
selected between stereo or monaural.
Select “EXTERNAL AUDIO INPUT” and select from the
list below.
STEREO: The sound is treated as stereo sound
L CH:
The sound is treated as the monaural
sound of the left channel.
R CH:
The sound is treated as the monaural
sound of the right channel.
76
VRDVD4005_P69-P86
76
03.8.20, 11:28 PM
Turning on image quality control / recording
SAP (Second Audio Program)
This unit is fitted with an SAP broadcast system that
enables you to switch to a second audio program while
viewing a selected channel.
This function applies only when the program is broadcast in multiple languages through the SAP broadcast
system.
Select “SAP” and select “ON” to use SAP, and to not
use it, select “OFF”.
This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “REC SETUP”. For the procedure, see steps
1 to 3 in “Using the SETUP MENU”.
SETUP MENU
TIMER REC SET
REC SETUP
SYSTEM SETUP
INITIALIZE
REC TO
DVD
AV SETUP REC MODE
INITIALIZE
Listening to SAP
When the unit is turned on or a channel selection is
made, make certain the letters “SAP” appear on the
screen. This means that “Second Audio Program” broadcasting is available.
SP
OFF
AUTO
CHAPTER
REC SETUP
CH SETUP
OTHER
SELECT
ENTER/
SELECT
ENTER
RETURN
BACK
SETUP
END
INITIALIZING REC TO
You can select the medium for recording that is first
displayed in the item “REC TO” on the advance timer
recording screen. The initial setting is “DVD”.
Select “FORMAT REC TO” and select the medium for
recording from the following list.
DVD:
VCR:
DVD is displayed in “REC TO”.
VCR is displayed in “REC TO”.
INITIALIZING REC MODE
You can select the recording mode that is first displayed
in the item “REC MODE” on the advance timer recording screen. The initial setting is “SP”.
Select “INITIALIZING REC MODE” and select the recording mode from the following list.
DVD:
VCR:
XP/SP/LP/SLP
SP/SLP
NOTE:
For the DVD recording mode, see page **. And for the
VCR recording mode, see page **.
AUTO CHAPTER
You can automatically make chapter marks on the DVD
to be recorded.
Select “AUTO CHAPTER” and select the interval between chapter marks from the list below.
OFF:
The automatic chapter is not used.
5 MIN: The interval is set to 5 minutes
10 MIN: The interval is set to 10 minutes
15 MIN: The interval is set to 15 minutes.
30 MIN: The interval is set to 30 minutes.
77
VRDVD4005_P69-P86
77
03.8.20, 11:28 PM
Selecting reception channel / other
This DVD/VCR is equipped with a channel memory
feature that allows you to skip channels up or down
to the next channel set in memory, hence skip over
unwanted channels.
Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition
to normal VHF and UHF channels, this DVD/ VCR
can receive up to 113 Cable TV channels. To use
this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from
the factory, this menu option is in the CATV mode.
You can set the switching interval between played
back images in the slide show mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “OTHER”. For the procedure, see steps 1 to 3
in “Using the SETUP MENU”.
SETUP MENU
TIMER REC SET
OTHER
SYSTEM SETUP
JPEG INTERVAL
OFF
AV SETUP
Preparation:
REC SETUP
• Turn ON the TV and set it to the video input mode.
• Select “CH SETUP”. For the procedure, see steps 1
to 3 in “Using the SETUP MENU”.
CH SETUP
OTHER
SETUP MENU
SELECT
TIMER REC SET
ENTER/
SELECT
CH SETUP
SYSTEM SETUP TV/CATV SELECT
AV SETUP
AUTO CH MEMORY
EXECUTE
REC SETUP
ADD/DELETE
EXECUTE
OTHER
SELECT
ENTER
RETURN
BACK
RETURN
BACK
SETUP
END
TV/CATV SELECT
END
JPEG INTERVAL
OFF:
5 SEC:
10 SEC:
15 SEC:
The slide show mode is not used.
The interval is set to 5 seconds.
The interval is set to 10 seconds.
The interval is set to 15 seconds.
Select “TV/CATV SELECT” and select “TV” or “CATV”.
TV:
VHF/UHF channels
CATV: CABLE TV channels
AUTO CH MEMORY
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
When you select “AUTO CH MEMORY” and press ENTER.
The AUTO CH MEMORY function will be activated.
The channel display will count up and, when finished,
the screen returns to normal.
ADD/DELETE (channels)
You can add the channels you want or delete the channels you do not want manually.
Select “ADD/DELETE” and select “ADD” or “DELETE”
for each channel.
or
to select the channel.
• Press
The numeric keys can also be used for selection.
• When you want to delete the selected channel, use +
or – to select “DELETE” and press ENTER.
• When you want to use the selected channel, use + or
– to select “ADD” and press ENTER.
78
VRDVD4005_P69-P86
SETUP
You can select the interval time for JPEG slide show.
Select “JPEG INTERVAL” and select the switching interval between images from the list below.
CH SETUP
ENTER/
SELECT
ENTER
CATV
78
03.8.20, 11:28 PM
Glossary
auto chapter
Feature that automatically makes chapter marks on
a DVD disk during recording.
auto clock
Feature that automatically sets the internal clock.
blue background
Feature that automatically changes unpleasant noise
images to a blue screen when a channel without a
broadcast or a channel on which the broadcast has
ended has been selected.
CATV
Acronym for Community Antenna Television
chapter
A section within a title is called a “chapter”.
CM Skip
When pressed during playback, playback jumps 30
sec ahead and resumes.
copy guard
Copyright protection signal. Software and broadcasts
that contain this signal cannot be recorded.
General parental control settings
Level 1:
Adult disks and general disks (R-rated
disks included) cannot be played back.
Level 2 to 3: Adult disks and R-rated disks cannot
be played back.
Level 4 to 7: Adult disks cannot be played back.
(Level 4 to 7 disks contain content children age 15 and younger may not see.)
Level 8:
All disks can be played back without restriction.
play list
User-created list of titles based on each program.
Progressive scanning
Technology that simultaneously displays odd-numbered scanning lines and even-numbered scanning
lines from top to bottom. Also called “525P”, “P” meaning “progressive”.
SETUP MENU
Menu that contains settings for various features of
this DVD player, such as recording and playback.
Timer-triggered recording is also set from the SETUP
MENU.
DNR
Acronym for Digital Noise Reduction. Technology that
reduces screen noise and flickering to produce clear
images.
slideshow
Technique for flipping through and viewing many images (JPEG files).
DVD menu
Menu recorded on a DVD video that enables the user
to select subtitle language, dubbing, etc.
subtitle language
Language used for subtitles of movies, etc. A DVD
can record subtitles in up to 32 languages. Viewers
can watch in a language of their choosing.
finalize
Operation that enables disks recorded or edited with
this player to be played back on other DVD players.
title
A program recorded on a disk is called a “title”.
Interlaced scanning
Technology that alternately displays odd-numbered
scanning lines and even-numbered scanning lines.
Also called “525I”, “I” meaning “interlace”.
letter box
Feature that displays black bands above and below
the playback images during playback of a disk recorded in wide (16:9) format on a 4:3 TV connected
to this player.
pan scan
Feature that cuts the left and right edges of playback
images to a 4:3 size during playback of a disk recorded in wide (16:9) format on a 4:3 TV connected
to this player.
title menu
Menu that lists titles and tracks recorded on the disk.
It is used for playback and disk editing.
top menu
Menu on a DVD video for selecting chapters for playback, subtitle language, etc. Some DVD videos call
this top menu “Title”.
track
A song on a music CD is called a “track”.
virtual surround
Technology that converts audio that is not recorded
in surround sound into audio that assimilates surround
sound.
parental control
Some discs control viewing according to the age of
the viewer. A control level can be set for those types
of disks.
79
VRDVD4005_P69-P86
79
03.8.20, 11:28 PM
Discs
A-B Repeat Playback
Playback that repeats between two set points, A and
B.
One touch repeat
If ONE TOUCH REPEAT is pressed during playback,
playback returns to a point 10 sec earlier and resumes.
region number
There is software that enables DVD playback in differing countries. The number of that kind of disk is
called the “region number”.
edit program
Feature that deletes unnecessary scenes of a title
recorded on a disk.
BROWSER screen
Screen that appears when TITLE MENU is pressed
during MP3, WMA or JPEG playback.
TRACK DATA screen
Screen that appears when TITLE MENU is pressed
during playback of a music CD.
80
VRDVD4005_P69-P86
80
03.8.20, 11:28 PM
Language code list
Enter the appropriate code number for the initial settings “DVD MENU”, “AUDIO” and/or “SUBTITLE” (see page 73).
Language Name Code Language Name Code Language Name Code Language Name Code
Abkhazian
1112 Fiji
1620 Lingala
2224 Singhalese
2919
Afar
1111 Finnish
1619 Lithuanian
2230 Slovak
2921
Afrikaans
1116 French
1628 Macedonian
2321 Slovenian
2922
Albanian
2927 Frisian
1635 Malagasy
2317 Somali
2925
Amharic
1123 Galician
1722 Malay
2329 Spanish
1529
Arabic
1128 Georgian
2111 Malayalam
2322 Sundanese
2931
Armenian
1835 German
1415 Maltese
2330 Swahili
2933
Assamese
1129 Greek
1522 Maori
2319 Swedish
2932
Aymara
1135 Greenlandic
2122 Marathi
2328 Tagalog
3022
Azerbaijani
1136 Guarani
1724 Moldavian
2325 Tajik
3017
Bashkir
1211 Gujarati
1731 Mongolian
2324 Tamil
3011
Basque
1531 Hausa
1811 Nauru
2411 Tatar
3030
Bengali; Bangla
1224 Hebrew
1933 Nepali
2415 Telugu
3015
Bhutani
1436 Hindi
1819 Norwegian
2425 Thai
3018
Bihari
1218 Hungarian
1831 Oriya
2528 Tibetan
1225
Breton
1228 Icelandic
1929 Panjabi
2611 Tigrinya
3019
Bulgarian
1217 Indonesian
1924 Pashto, Pushto
2629 Tonga
3025
Burmese
2335 Interlingua
1911 Persian
1611 Turkish
3028
Byelorussian
1215 Irish
1711 Polish
2622 Turkmen
3021
Cambodian
2123 Italian
1930 Portuguese
2630 Twi
3033
Catalan
1311 Japanese
2011 Quechua
2731 Ukrainian
3121
Chinese
3618 Javanese
2033 Rhaeto-Romance2823 Urdu
3128
Corsican
1325 Kannada
2124 Romanian
2825 Uzbek
3136
Croatian
1828 Kashmiri
2129 Russian
2831 Vietnamese
3219
Czech
1329 Kazakh
2121 Samoan
2923 Volapük
3225
Danish
1411 Kirghiz
2135 Sanskrit
2911 Welsh
1335
Dutch
2422 Korean
2125 Scots Gaelic
1714 Wolof
3325
English
1524 Kurdish
2131 Serbian
2928 Xhosa
3418
Esperanto
1525 Laothian
2225 Serbo-Croatian
2918 Yiddish
2019
Estonian
1530 Latin
2211 Shona
2924 Yoruba
3525
Faroese
1625 Latvian, Lettish
2232 Sindhi
2914 Zulu
3631
81
VRDVD4005_P69-P86
81
03.8.20, 11:28 PM
82
VRDVD4005_P69-P86
82
03.8.20, 11:28 PM
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or
service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD/VCR
DVD/VCR does not operate.
12~15
No picture.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not
set to the video channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to
VIDEO (or equivalent).
• Channel is set to the external mode.
No sound.
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
12~17
–
24,36
•
•
The remote control does not func•
tion.
•
•
Make sure the power cord is plugged in.
Try another AC outlet.
Power is off, check fuse or circuit breaker.
Unplug unit, then plug it back in.
Select the DVD or VCR mode before operating.
–
–
18,34
•
•
•
•
•
Aim at the remote control at the remote sensor.
Operate within Approx. 5 Meters or reduce the light in the room.
Clear the path of the beam.
The batteries are weak. Replace the batteries.
Check the batteries are inserted correctly.
18
12~17
–
–
11
• Check all CATV connections.
• Station or CATV system problems, try another station.
14,15
TV recording does not work.
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
22,26
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• TIMER REC has not been pressed ( is not lit).
19
29
29
24
Noise bars on screen.
• Tracking adjustment beyond range of automatic tracking circuit.
Try Manual tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
No CATV reception
VCR
55
–
DVD
Display is not shown in your lan• Select proper language in the menu options.
guage.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
Playback doesn’t start.
Stopping playback, search, slowmotion play, repeat play, or program • Some discs may not do some of the functions.
play, etc. cannot be performed.
34
35
33
33
–
83
VRDVD4005_P69-P86
83
03.8.20, 11:28 PM
Problems and troubleshooting / Video head cleaning
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
• The S-VIDEO/COMPONENT selecter is not set correctly.
No picture, or the screen is blurred
• The progressive scanning mode is active through the unit is
or divided into two parts.
connected to a TV via the VIDEO OUT jack.
16
52
No 4:3 (16:9) picture
• The setup does not match your TV.
49
No on-screen display
• Select Display On.
50
No surround sound
• The setup does not match your stereo system.
17
The unit or remote operation key is • Turn off the unit and unplug the AC power cord for several minutes, then replug it.
not functioning.
–
Playback does not start when the
• Check the Parental setup.
title is selected.
44
Audio soundtrack and/or subtitle
language is not changed when you • Multilingual language is not recorded on the DVD disc.
play back a DVD.
47,48
No subtitle
• Some discs have no subtitles.
• Subtitles are cleared. Press SUB TITLE.
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
43
• The function is prohibited with the unit or the disc.
–
appears on the screen.
42,47
Video head cleaning
Video head clogging
The video heads are the means by which the DVD/VCR reads
the picture from the tape during playback. In the unlikely event
that the heads become dirty enough to be clogged, no picture
will be played back. This can easily be determined if, during
playback of a known good tape, there is good sound, but no
picture (picture is extremely snowy). If this is the case, have the
DVD/VCR checked by qualified service personnel.
Good Picture
Snowy Picture
NOTES: • DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE
REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
84
VRDVD4005_P69-P86
84
03.8.20, 11:28 PM
Get it fixed, at your home or ours!
Your Home
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME®
(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222
Call anytime, day or night (U.S.A. only)
www.sears.com
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
1-888-SU-HOGARSM
(1-800-533-6937)
www.sears.ca
(1-888-784-6427)
1-800-LE-FOYERMC
ÆRegistered Trademark / TM Trademark / SM Service Mark of Sears, Roebuck and Co.
ÆMarca Registrada / TM Marca de F·bri ca / SM Marca de Servicio de Sears, Roebuck and Co.
MC
Marque de commerce / MD Marque dÈposÈe de Sears, Roebuck and Co.
© Sears, Roebuck and Co.
Printed in Thailand
03/09
VRDVD4005_P69-P86
86
03.8.20, 11:28 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:08:20 23:23:57Z
Modify Date                     : 2003:08:22 14:16:59+09:00
Page Count                      : 42
Has XFA                         : No
Creation Date                   : 2003:08:20 23:23:57Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : hana
Mod Date                        : 2003:08:22 14:16:59+09:00
Metadata Date                   : 2003:08:22 14:16:59+09:00
Creator                         : hana
Title                           : hyoushi

EXIF Metadata provided by EXIF.tools