ORION ELECTRIC M2E5B VCR/DVD TV Interface Device User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	469654
Application ID	MeA0AIFhR6VwsE5O/zhgUw==
Document Description	Users Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	216.6kB (2707551 bits)
Date Submitted	2004-09-17 00:00:00
Date Available	2004-09-17 00:00:00
Creation Date	2004-09-15 18:48:48
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2004-09-15 18:48:59
Document Title	Users Manual Part 2

Recording a DVD/CD disc
You can record disc material in DVD, Audio CD, etc. onto a Video
tape with this DVD/VCR.
Duplicating a DVD or CD disc
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.
Press SP/SLP to select the desired tape speed
SP or SLP.
SP/SLP
PLAY MODE
DISC IS COPY PROTECTED
Press VCR DVD selector to select the DVD mode.
The DVD indicator will light.
VCR
DVD
Other functions (VCR)
00 : 00 : 00 SP
Notes:
• You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
• When the scanning mode is set to the progressive mode,
you cannot duplicate a disc material onto a video tape.
When REC/OTR is pressed, the PROGRESSIVE indicator
“ ” on the display window will flash and “Please Set
Off” will appear on the screen.
• You cannot record discs encoded with copy guard
function. The following icon and text will show up on the
TV screen.
Press PLAY to start playback.
PLAY
Press REC/OTR to start recording.
Press STOP if you finish recording.
REC/OTR
STOP
The DVD/VCR will change to the
VCR mode automatically and the
playback picture or sound will be
duplicated on the video cassette
tape.
If you wish to stop a DVD/CD disc,
press VCR DVD selector to change
the DVD mode, then press STOP.
41
J2D81001A (E)p38-41.p65
41
28/5/04, 1:53 PM
Basic playback (DVD)
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
DVD
VCD
CD
Display window
3, 5
STOP PLAY
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. This
may include S-video or component video inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input
connected to the DVD/VCR.
Press ON/STANDBY (I /
ON/STANDBY
).
The DVD/VCR turns on.
Press OPEN/CLOSE or PLAY on the unit.
OPEN/CLOSE
The disc tray closes automatically.
” changes to
“Reading” and then playback
commences.
PLAY On the TV-screen, “
OR
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press VCR/DVD SELECT to select the DVD mode.
VCR/DVD
The DVD indicator will light.
Reading
SELECT
Press OPEN/CLOSE.
OPEN/CLOSE
The disc tray opens.
Press
or
to select title.
SET +
CH –
CH +
ENTER
SET –
Place the disc on the disc tray.
Press ENTER.
SET +
CH –
CH +
• Title is selected and play
commences.
ENTER
With the playback
side down
SET –
Press STOP to end playback.
STOP
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD/VCR to malfunction.
• Do not place a disc which is unplayable in this
DVD/VCR.
• The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
PLAY
42
J2D81001A (E)p42-45.p65
42
28/5/04, 1:53 PM
To obtain a higher quality picture
VCR DVD
OPEN/CLOSE
PLAY
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD/VCR, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
About
PAUSE/STILL
STOP
ENTER
The
icons on the heading bar show the playable discs for the
function described under that heading.
: You can use this function with DVD video discs.
: You can use this function with Video CDs.
: You can use this function with Audio CDs and CD-R/RW CDs.
To pause playback (still mode)
Press PAUSE/STILL during playback.
PAUSE/STILL
To resume normal playback, press
the PLAY button.
• The sound is muted during still
mode.
To stop playback
Press STOP.
STOP
To remove the disc
Press OPEN/CLOSE.
OPEN/CLOSE
1) Start to record.
Follow steps 1~5 on page 34.
• If the DVD/VCR is standing by for recording, turn on
the DVD/VCR.
2) Press VCR DVD selector to select DVD mode. The
DVD indicator will light.
3) Play a disc.
Follow steps 3 ~ 5 on page 42.
• Press PLAY if the DVD/VCR does not start to play a
disc automatically.
4) Stop to play.
Press STOP to stop play back a disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for about five minutes.
The screen will repeatedly get dark gradually and back
to normal.
To turn off the PBC
Press number button 1 in the stop mode, then press
ENTER.
Basic playback (DVD)
Remove the disc after the disc tray
opens completely.
Playing a Disc while the VCR section is
recording or standing by for timer recording
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (See pages 8 and 61).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY
button on the unit, “Reading” will appear on the display for 30 seconds and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see above.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the DVD/VCR during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD/VCR to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD/VCR to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
ON/STANDBY (I / ) button on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
43
J2D81001A (E)p42-45.p65
43
28/5/04, 1:53 PM
Basic playback (DVD)
Playing a disc (continued)
You can play discs at various speeds.
REW
SKIP
PLAY
FWD
PAUSE/STILL
SLOW
DVD
VCD
CD
Playing in fast reverse or fast forward directions
Press REW or FWD during playback.
FWD
REW
REW: Fast reverse playback
FWD: Fast forward playback
Each time you press the REW or
FWD button, the playback speed
changes.
DVD
VCD
To resume normal playback
Press PLAY.
PLAY
Notes:
• The DVD/VCR mutes sound and subtitles during reverse
and forward scan of DVD video discs. However, the DVD/
VCR plays sound during fast forward or fast reverse play
of audio CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
To resume normal playback
Press PAUSE/STILL during still playback.
PAUSE/STILL
DVD
VCD
Each time you press the PAUSE/
STILL button, the picture advances
one frame.
Press PLAY.
PLAY
Note:
The sound is muted during frame by frame playback.
Playing in slow-motion
To resume normal playback
Press SLOW during playback.
SLOW
DVD
VCD
CD
Each time you press the SLOW
button, the slow-motion speed
changes.
Press PLAY.
PLAY
Note:
The sound is muted during slow-motion playback.
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
INDEX +
SKIP
To locate succeeding chapters or
tracks.
– INDEX
SKIP
Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.
Notes:
may appear at the upper left of the screen. This symbol means either the feature you tried is not
• A “Prohibition” symbol
available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/
VCR.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
44
J2D81001A (E)p42-45.p65
44
28/5/04, 1:53 PM
Advanced playback (DVD)
MP3/WMA/JPEG playback
OPEN/CLOSE
0–9
This player can play back the MP3/WMA/JPEG-data which has been recorded
on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a
Windows-PC with CD-ROM drive and a MP3/WMA/JPEG-encoding Software
(not supplied).
The Apple-HFS-System cannot be played.
PLAY
STOP
ENTER
▲/▼/
MP3/WMA playback
CD
Press OPEN/CLOSE.
OPEN/CLOSE
The disc tray will open.
Place a disc on which MP3
or WMA files have been
recorded onto the tray.
The disc tray closes automatically.
On the TV-screen,“Reading” will appear.
Reading will take as
Reading
much time as the
number of file.
or
to select folder.
-/72 --:--
CD-R
SET +
CH –
CH +
ENTER
SET –
Pops
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
or
or Number keys to select
Press
the desired file, then press ENTER.
The file is selected and play commences.
SET +
CH –
CH +
ENTER
SET –
• In case the folder includes more than
or
to display
15 tracks, press
next file list.
-/72 --:--
CD-R
Pops
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
-/72 --:--
CD-R
15
16
Pops
Mother
Hold Your Last
/0-9/Enter/Play Mode
• When PLAY has been pressed after
displaying the file menu, or when the
disc tray has been closed after pressing
PLAY in step 2, playback begins
automatically starting from the first file.
In this case, if the first file is an MP3/
WMA file, only MP3/WMA files are
played back in order.
If the first file is a JPEG file, the first
JPEG file is played back.
J2D81001A (E)p42-45.p65
45
• The unit records the stopped point.
“ ” appears on the screen. Press
PLAY to resume playback (from the
scene point).
• If you press STOP again or unload the
disc, the unit will clear the stopped point.
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by
ISO9660, its file name must include 3-digits extension
letters, “mp3”, ”wma”, “jpg”.
• The directory and file names of the MP3/WMA/JPEG CD
must be correspond to the ISO standardized files.
• This unit can read 200 files per disc. If a disc has more than
200 files, it reads up to 200 files, the remaining files will be
omitted.
• The unit is able to recognize up to a maximum of 50
directories per disc.
• MP3/WMA CDs cannot be used for playback for the
purpose of recording.
• If the CD has both audio tracks and MP3/WMA/JPEG files,
only audio tracks are played.
• It may take more than one minute for this unit to read MP3/
WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be
played back, the file name is displayed (within 16 letters) on
the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System”
(HFS) cannot be played.
• The unit can play back baseline and progressive JPEG files.
Limitations on display
• The maximum number for display is 16 letters. Available
letters for display are the following: capital or small
alphabets of A through Z, numbers of 0 through 9, and _
(under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1. Use MP3/WMA/JPEG software that records data
alphabetically or numerically.
2. Name each file including two-digit or three-digit number
(e.g. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
Advanced
Basic playback
(DVD) playback (DVD)
A file menu screen will appear on the TV screen.
Press
PLAY
MP3/WMA/JPEG CD Information
PLAY
Press STOP to end playback.
STOP
Press OPEN/CLOSE or PLAY.
OPEN/CLOSE
WMA disc compatibility with this player is limited as follows:
1) Sampling Frequency: within 32 -- 48 kHz
2) Bit Rate: within 48 -- 192kbps.
Mono WMA files and WMA files (under 48kbps) cannot
be played back on this player.
CAUTION:
• Some MP3/WMA/JPEG CDs cannot be played back
depending on the recording conditions.
• The CD-R/RW that has no music data or non-MP3/WMA/
JPEG files cannot be played back.
28/5/04, 1:53 PM
45
Advanced playback (DVD)
MP3/WMA/JPEG playback (continued)
OPEN/CLOSE
0–9
You can select your desired JPEG file on the file menu and picture menu.
The selected JPEG file is automatically adjusted to the TV screen. (When the
aspect ratio of the JPEG file is different to your TV screen, the black bar will
appear at the top and bottom, or the both sides of the TV screen.
SKIP
PLAY
STOP
TOP MENU
MENU
ENTER
▲/▼/ /
JPEG CD playback
Press OPEN/CLOSE.
The disc tray will open.
Place a disc on which
JPEG files have been
recorded onto the tray.
OPEN/CLOSE
Press ENTER.
The selected picture appears on the TV
screen.
SET +
CH –
CH +
ENTER
SET –
Press OPEN/CLOSE or PLAY.
The disc tray closes automatically.
On the TV-screen, “Reading” will appear.
Reading will take
Reading
as much time as
the number of file.
OPEN/CLOSE
Press STOP to end playback.
STOP
PLAY
A file menu screen will appear on the TV screen.
Press
or
to select folder.
CD-R
Collection
Pic-1
Pic-2
Pic-3
Pic-4
Pic-5
Pic-6
Pic-7
-/36
8 Pic-8
9 Pic-9
10 Pic-10
11 Pic-11
12 Pic-12
13 Pic-13
14 Pic-14
/0-9/Enter/Play Mode/Menu
Press
or
the desired file.
or Number keys to select
SET +
CH –
CH +
ENTER
SET –
CD-R
Collection
Pic-1
Pic-2
Pic-3
Pic-4
Pic-5
Pic-6
Pic-7
-/36
8 Pic-8
9 Pic-9
10 Pic-10
11 Pic-11
12 Pic-12
13 Pic-13
14 Pic-14
/0-9/Enter/Play Mode/Menu
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
or
to select the desired file.
Press
MENU
TOP MENU
The file menu appears on the TV
screen.
If you want to watch the other file,
repeat steps 4~5.
Notes:
• The picture menu is displayed when the FUJICOLOR CD or
the Kodak Picture CD are played. To display the file menu
press TOP MENU.
• During MP3/WMA/JPEG-Playback, you can not use SEARCH,
A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG CD Playback. (See
pages 52 and 53.)
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from the
file menu.
File menu information
Operation
Media type
Folder
Elapsed time
File number
1/94 02:36
CD-R
Pops
Japan
flower
Bay Bridge
Lies and Truth3
CLOSE MY EYES 10 Pic-1
DIVE TO BLUE 11 Pic-2
12 Pic-3
Honey
13 Pic-4
BLUE EYES
14 Pic-5
Blurry Eyes
/0-9/Enter/Play Mode/Menu
: Indicates MP3 file
or
• To display next list, press SKIP
• When PLAY has been pressed after displaying the
file menu, or when the disc tray has been closed
after pressing PLAY in step 2, playback begins
automatically starting from the first file. In this
case, if the first file is a JPEG file, the first JPEG
file is played back. If the first file is an MP3/WMA
file, only MP3/WMA files are played back in order.
: Indicates WMA file
: Indicates JPEG file
Microsoft, Windows Media, and Windows Logo are
trademarks or registered trademarks of Microsoft
Corporation in both the United States and other countries.
46
J2D81001A (E)p46-47.p65
46
28/5/04, 1:53 PM
SETUP
ENTER
▲/▼/ /
Setting the JPEG Interval
Press SETUP in the stop mode. Press
select “Picture”, then press ENTER.
VCR MENU
SETUP
or
to
Basic playback (DVD)
You can continuously play back all JPEG files automatically.
After the setting below, start playing the disc on which JPEG files have been recorded.
To make SETUP screen disappear, press SETUP.
VCR MENU
SETUP
Language Picture Sound Parental Other
SET +
CH –
CH +
ENTER
/Enter/Setup/Return
SET –
Press
or
to select “JPEG Interval”.
Language Picture Sound Parental Other
SET +
CH –
ENTER
SET –
Press ENTER or
to select your desired time.
Language Picture Sound Parental Other
SET +
CH –
Advanced playback (DVD)
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
CH +
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval 5 Seconds
All
Select Files
/Enter/Setup/Return
CH +
ENTER
SET –
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at 5
second intervals.
10 Seconds:
Plays back images in the form of a slide show at 10
second intervals.
15 Seconds:
Plays back images in the form of a slide show in 15
second intervals.
47
J2D81001A (E)p46-47.p65
47
28/5/04, 1:53 PM
Advanced playback (DVD)
MP3/WMA/JPEG playback (continued)
SETUP
ENTER
▲/▼/ /
Setting the Select Files
When playing back a CD containing a mixture of MP3, WMA and JPEG files, only MP3/WMA or JPEG files can be displayed on
the file menu.
Press SETUP in the stop mode.
Press
or
to select “Picture”, then press
ENTER.
VCR MENU
SETUP
To make SETUP screen disappear, press
SETUP.
VCR MENU
SETUP
Language Picture Sound Parental Other
SET +
CH –
CH +
/Enter/Setup/Return
ENTER
SET –
Press
or
to select “Select Files”.
SET +
CH –
Language Picture Sound Parental Other
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
CH +
ENTER
SET –
Press ENTER or
file type.
SET +
CH –
to select your desired
Language Picture Sound Parental Other
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
Pictures Only
Select Files
/Enter/Setup/Return
CH +
ENTER
SET –
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
48
J2D81001A (E)p48-49.p65
48
28/5/04, 1:54 PM
ANGLE
ZOOM
▲/▼/
Zooming (JPEG CD)
Press ZOOM during playback.
CM SKIP
ZOOM
Enlarged JPEG images are displayed.
You can make the images even larger
by repeatedly pressing ZOOM.
Press
frame.
Basic playback (DVD)
This unit will allow you to zoom in on the JPEG image.
to view a different part of the
SET +
CH +
CH –
ENTER
SET –
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
Off
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
CM SKIP
ZOOM
Changing angles (JPEG CD)
You can display JPEG images rotating at 90 degree intervals.
Press ANGLE during playback.
Images are rotated 90 degrees to the right.
COUNTER RESET
ANGLE
Press ANGLE repeatedly until the desired
angle is selected.
Pressing ANGLE four times returns the image
to its original angle.
COUNTER RESET
ANGLE
• Images are displayed at the
same angle until the disc is
removed.
Advanced playback (DVD)
49
J2D81001A (E)p48-49.p65
49
28/5/04, 1:54 PM
Advanced playback (DVD)
DISPLAY
Zooming/Locating desired scene
0–9
▲/▼/
JUMP
ZOOM
ENTER
CANCEL
DVD
VCD
Zooming
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the
frame.
Press ZOOM during playback.
CM SKIP
ZOOM
The centre part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
to view a different part of the
SET +
CH –
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
CH +
ENTER
SET –
Press
frame.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
CM SKIP
ZOOM
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD
VCD
CD
Locating desired scene
Use the title, chapter and time recorded on the disc to locate the desired point to play back.
To check the title, chapter and time, press DISPLAY.
Press JUMP during playback or stop mode.
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
ZERO RETURN
JUMP
Press
or
“Chapter”.
to select the “Time”, “Title” or
SET +
CH –
Press Numbered buttons (0–9) to change the
number.
Press ENTER. Playback starts.
SET +
CH +
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
CH –
CH +
ENTER
ENTER
SET –
SET –
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page 43 .
50
J2D81001A (E)p50-53.p65
50
28/5/04, 1:54 PM
Marking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
▲/▼
MARKER
ENTER
CANCEL
DVD
VCD
Marking the scenes
Press MARKER during playback.
Select the blank Marker using
or
Then press ENTER at the desired scene.
MARKER
Marker 1
Marker 2
Marker 3
/Enter/Cancel/Marker
• Repeat this procedure to set
the other 2 scenes.
Returning to the scenes
Press MARKER during playback or stop mode.
Press
Basic playback (DVD)
DVD
VCD
MARKER
Marker 1
00 27 54
Marker 2
01 16 25
Marker 3
02 08 31
/Enter/CancelMarker
or
to select the Marker 1-3.
Marker 1
00 27 54
Marker 2
01 16 25
Marker 3
02 08 31
/Enter/Cancel/Marker
SET +
CH –
CH +
ENTER
SET –
SET +
CH –
Marker 1
00 27 54
Marker 2
Marker 3
/Enter/Cancel/Marker
CH +
ENTER
SET –
Press ENTER.
SET +
CH +
ENTER
Press MARKER to remove this display.
Playback starts from the marked
scene.
SET –
MARKER
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
Notes:
• Some discs may not work with the marking operation.
• The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
Advanced playback (DVD)
CH –
51
J2D81001A (E)p50-53.p65
51
28/5/04, 1:54 PM
Advanced playback (DVD)
Repeat playback/A-B Repeat playback
PLAY MODE
A-B RPT
PLAY
ENTER
▼/
DVD
VCD
CD
Repeat playback of Title, Chapter and Track
Press PLAY MODE during playback or stop mode.
SP/SLP
PLAY MODE
DVD
VCD
CD
A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
Press A-B RPT during playback.
A-B RPT
The start point is selected.
DVD
Press
or ENTER once or twice to select
“Chapter” or “Title”.
SET +
CH –
CH +
Repeat
Off
/Enter/Play Mode
Repeat
Chapter
/Enter/Play Mode
Repeat
Title
/Enter/Play Mode
ENTER
SET –
CD/VCD
Press
to select “Repeat”.
Press
or ENTER once or twice to select
“Track” or “All”.
Press A-B RPT again.
A-B RPT
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, returns to Point A automatically, then
starts again.
SET +
CH –
CH +
ENTER
Play Mode
Off
Repeat
Off
/Enter/Play Mode
Play Mode
Off
Track
Repeat
/Enter/Play Mode
A B
Play Mode
Off
Repeat
All
/Enter/Play Mode
SET –
Press PLAY MODE again to make the screen
disappear.
Press PLAY to start Repeat playback.
To resume normal playback, select Repeat “Off”.
To resume normal playback
Press A-B RPT again.
Notes:
Some discs may not work with the repeat operation.
A-B RPT
“
Off ” appears on the screen.
Notes:
• In A-B repeat mode, subtitles near point A or B may not
appear.
• A-B Repeat playback is not available in multi-angle scenes.
• A-B Repeat playback does not work when Repeat playback
is on.
• You may not be able to set A-B Repeat, depending on the
scenes of the DVD.
• A-B repeat does not work with an interactive DVD, MP3/
WMA/JPEG CD and Video CD with PBC.
52
J2D81001A (E)p50-53.p65
52
28/5/04, 1:54 PM
Program playback/Random playback (CD)
0–9
You can arrange the order of tracks on the disc.
PLAY MODE
PLAY
▲/▼/
ENTER
CANCEL
VCD
CD
Press PLAY MODE in the stop mode.
SP/SLP
PLAY MODE
Play Mode
Off
Repeat
Off
/Enter/Play Mode
Press
or
to select “Program
Playback” and press ENTER.
CH –
SET +
CH –
SET –
Press / or / to select the programming
position. Use Numbered buttons (0–9) to input
the Track numbers.
SET +
ENTER
ENTER
SET –
Play Mode
: Program
: Off
Repeat
19
10
23
11
3 11
12
Clear
Program Playback
/Enter/0–9/Cancel/Play Mode
To cancel program playback
Select “Clear” and press ENTER.
• To program others, repeat Step 3.
• If you input a wrong number, press
CANCEL.
CH –
SET –
• The program is canceled when
you open the disc tray or turn the
power off.
SET +
CH +
ENTER
VCD
CD
Play Mode
: Program
: Off
Repeat
19
10
23
11
3 11
12
Clear
Program Playback
/Enter/0–9/Cancel/Play Mode
SET –
Note:
In playing back the Video CD with PBC, you cannot set
Program playback.
Advanced playback (DVD)
CH +
CH –
CH +
Play Mode
: Program
Repeat
: Off
10
11
12
Clear
Program Playback
/Enter/0–9/Cancel/Play Mode
CH +
ENTER
The programmes you selected will start
to playback in the order.
To return to normal playback, select
Play Mode: “Off”.
SET +
Press
or
to select Play Mode, then press
or to select “Program”.
Basic playback (DVD)
Program playback
Random playback
Press PLAY MODE in the stop mode.
Press
to select Play Mode, then press
to select “Random”.
SP/SLP
PLAY MODE
SET +
CH –
Press PLAY.
PLAY
The Random Playback will start.
Note:
In playing back the Video CD with PBC, you cannot set
Random playback.
Play Mode
: Random
Repeat
: Off
/Enter/Play Mode
CH +
ENTER
SET –
53
J2D81001A (E)p50-53.p65
53
28/5/04, 1:54 PM
Advanced playback (DVD)
Changing angles/Title selection/DVD menu
ANGLE
PLAY
TOP MENU
MENU
ENTER
▲/▼/ /
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
Press ANGLE during playback.
The current angle will appear.
COUNTER RESET
ANGLE
Press ANGLE repeatedly until the desired angle
is selected.
COUNTER RESET
ANGLE
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
Title selection
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
Press TOP MENU during playback.
Press
TOP MENU
Title menu appears on the screen.
Press ENTER or PLAY.
CH –
or
The playback of the selected title will
start.
SET +
CH +
PLAY
ENTER
to select the desired title.
SET –
SET +
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
CH +
CH –
ENTER
SET –
DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
Press MENU during playback.
The DVD menu appears on the screen.
MENU
• Press MENU again to resume
playback at the scene when you
pressed MENU.
Press ENTER.
SET +
CH –
CH +
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
ENTER
SET –
Press
or
to select the desired item.
Note:
Depending on the DVD, you may not be able to resume
playback from the scene point when you pressed MENU.
SET +
CH –
CH +
ENTER
SET –
54
J2D81001A (E)p54-57.p65
54
28/5/04, 1:54 PM
Function setup (DVD)
Changing soundtrack language/
Setting surround sound
AUDIO
Changing soundtrack language
DVD
VCD
You can select the language when you play a multilingual disc.
Press AUDIO during playback.
AUDIO SELECT The current soundtrack language will
AUDIO
appear.
Audio type changes as follows each time you press AUDIO.
LR
Spatializer Off
2/8 Fra Dolby Digital
Spatializer Off
In case of Video CD playback
Press AUDIO repeatedly until the desired language is selected.
AUDIO SELECT The on-screen display will disappear
AUDIO
after a few seconds.
Spatializer Off
Spatializer Off
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• Changing soundtrack language is canceled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
1/8 Eng
Eng Dolby
Dolby Digital
Digital
Spatializer
Spatializer Off
Off
Setting surround sound
This DVD/VCR equipped with a “SPATIALIZER VIRTUAL SURROUND”. It can produce the effect of being in a cinema
or a concert hall.
During disc playback press AUDIO.
AUDIO SELECT
AUDIO
1/8 Eng Dolby Digital
Spatializer Off
Press
or
CH +
ENTER
SET –
or
to select the
Note:
The “SPATIALIZER VIRTUAL SURROUND” is effective only
for the sound of disc.
to select “On”.
SET +
CH –
To cancel Surround mode:
Follow the left steps 1~2, then press
“Off” position.
1/8 Eng Dolby Digital
Spatializer On
Advanced playback
setup (DVD)
Function (DVD)
DVD
VCD
CD
Certain audio features of this product manufactured under
a license from Desper Products, Inc. Spatializer ® and the
circle-in-square device are trademarks owned by Desper
Products, Inc.
55
J2D80701A (E)p54-57.p65
55
31/5/04, 10:58 AM
Function setup (DVD)
Setting subtitles/Karaoke playback
SUBTITLE
AUDIO
▲/▼/ /
Turning the subtitles on and off
When playing back a disc recorded with subtitles, you can turn the subtitles on or off.
Press SUBTITLE during playback until “Off”
appears.
ATR
SUBTITLE
Off
Note:
Depending on the DVD, you may not be able to turn
the subtitles on even if they are recorded on it.
Depending on the DVD, you may not be able to turn
the subtitles off.
Changing the subtitle language
You can select the language when playing back a disc recorded with multi-lingual subtitles.
Press SUBTITLE repeatedly during playback until
your desired language appears.
ATR
SUBTITLE
1/32 Eng
The on-screen display will disappear after a few
seconds.
Notes:
• Changing subtitle language is canceled when you open
the disc tray.
• Depending on the DVD, you may not be able to change
the subtitles even if multilingual subtitles are recorded
on it. While playing the DVD, the subtitle may change
when: -you open or close the disc tray -you change the
title.
• In some cases, the subtitle language is not changed to
the selected one immediately.
Karaoke playback
You can turn the vocal on or off recorded on the DVD KARAOKE.
During DVD KARAOKE disc playback, press
AUDIO.
AUDIO SELECT
AUDIO
1/8 Eng Dolby Digital
Spatializer Off
Press ▲ or ▼ until the KARAOKE symbol (
appears.
• If you play non-Karaoke disc, the KARAOKE
symbol ( ) does not appear.
Notes:
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
• When playing Karaoke, connect appropriate audio
equipment such as an amplifier to the DVD/VCR.
SET +
CH –
1/8 Eng Dolby Digital
CH +
ENTER
Off
SET –
Press
or
SET +
CH –
CH +
ENTER
to select “On” or “Off”.
On : The primary vocal is output
when it is recorded on the disc.
Off : The primary vocal is not output.
SET –
56
J2D81001A (E)p54-57.p65
56
28/5/04, 1:54 PM
E.B.L. (Enhanced Black Level)
To select the black level of playback pictures, set your preference
and monitor’s ability.
SETUP
RETURN
ENTER
▲/▼/ /
Setting E.B.L.
Press SETUP in the stop mode or No Disc.
or
to select “Picture”.
Press
VCR MENU
SETUP
Language Picture Sound Parental Other
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being displayed.
VCR MENU
SETUP
SET +
CH –
RETURN
CH +
/Enter/Setup/Return
ENTER
SET –
Press
or ENTER, then press
“E.B.L.”.
SET +
CH –
or ENTER to select “On” or “Off”.
Language Picture Sound Parental Other
SET +
On
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
CH +
CH –
Advanced playback
setup (DVD)
Function (DVD)
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
SET –
Press
to select
Language Picture Sound Parental Other
CH +
ENTER
or
ENTER
SET –
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
57
J2D81001A (E)p54-57.p65
57
28/5/04, 1:54 PM
Function setup (DVD)
Setting the aspect ratio of TV screen
You can select the aspect ratio for your TV.
The following pages describe the setup/operation in DVD mode.
SETUP
RETURN
ENTER
▲/▼/ /
Setting the aspect ratio of TV screen
Press SETUP in the stop mode or No Disc.
or
to select “Picture”.
Press
VCR MENU
SETUP
Language Picture Sound Parental Other
SET +
CH –
CH +
/Enter/Setup/Return
ENTER
SET –
Press
or ENTER, then press
“Tv Screen”.
SET +
CH –
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
SET –
Press
to select
Language Picture Sound Parental Other
CH +
ENTER
or
You have the following screen sizes to choose from:
4:3
Letter box:
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
4:3
Pan scan:
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
16:9
Wide:
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being displayed.
VCR MENU
SETUP
RETURN
or ENTER.
Press
or
to select your desired screen
type, then press ENTER.
SET +
CH –
Language Picture Sound Parental Other
Off
E.B.L.
4:3
4:3
Tv Screen
4:3
On
Display
16:9
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
CH +
ENTER
SET –
Note:
If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style.
58
J2D81001A (E)p58-61.p65
58
28/5/04, 1:54 PM
DISPLAY
Setting on screen display/Status display of disc
SETUP
RETURN
ENTER
▲/▼/ /
Setting on screen display
On screen display can be switched on or off when you press the buttons.
Press SETUP in the stop mode or No Disc.
or
to select “Picture”.
Press
VCR MENU
SETUP
Press
or ENTER to select “On” or “Off”.
SET +
Language Picture Sound Parental Other
Language Picture Sound Parental Other
CH –
Off
E.B.L.
4:3
Tv Screen
Off
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
CH +
ENTER
SET –
SET +
CH –
/Enter/Setup/Return
CH +
ENTER
SET –
On:
Off:
Press
or ENTER, then press
“Display”.
or
to select
SET +
Language Picture Sound Parental Other
CH –
Off
E.B.L.
4:3
Tv Screen
On
Display
JPEG Interval Off
All
Select Files
/Enter/Setup/Return
CH +
ENTER
SET –
On screen displays appear when you press
the buttons (factory setting).
On screen displays do not appear when you
press any buttons.
To make SETUP screen disappear, press SETUP or
RETURN while the SETUP screen is being displayed.
VCR MENU
SETUP
RETURN
Function setup (DVD)
DVD
VCD
CD
Status display of disc
Each press of DISPLAY, the status display of the disc
will appear on the screen and change as follows.
Video CD
00:12
04:32
34:56
71:33
PBC
Track -/-
00:12
04:32
DVD
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 Eng DolbyDigital
1/32 Eng
Title
Audio CD
Track 11/99
To make status display disappear, press DISPLAY again.
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
59
J2D81001A (E)p58-61.p65
59
28/5/04, 1:54 PM
Function setup (DVD)
Dynamic Range Control
DRC (Dynamic Range Control) enables you to control the dynamic range so as to
achieve a suitable sound for your equipment.
SETUP
RETURN
ENTER
▲/▼/ /
Dynamic Range Control
Press SETUP in the stop mode.
or
to select “Sound”.
Press
VCR MENU
SETUP
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
Language Picture Sound Parental Other
VCR MENU
SETUP
SET +
CH –
/Enter/Setup/Return
CH +
RETURN
ENTER
SET –
Press
or ENTER to select “Dialogue”.
SET +
CH –
Language Picture Sound Parental Other
Off
Dialogue
CH +
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
ENTER
SET –
/Enter/Setup/Return
Press
or ENTER, then press
desired setting.
SET +
CH –
or
to select
Language Picture Sound Parental Other
Dialogue
CH +
ENTER
Off
On : DRC(TV)
Off : DRC(Std)
SET –
/Enter/Setup/Return
On:
Off:
Loud sound such as explosion or the
like is toned down slightly when played
back. This makes it suitable for when it is
connected to a stereo.
It plays back at the recording level on the
disc.
60
J2D81001A (E)p58-61.p65
60
28/5/04, 1:54 PM
Parental control setting
OPEN/CLOSE
0–9
Some discs are specified not suitable for children. Such discs can be limited
not to play back with the unit.
▲/▼/ /
SETUP
RETURN
ENTER
CANCEL
Parental control setting
Press SETUP in the stop mode or No Disc.
Press
or
to select “Parental”. Then press
or ENTER.
VCR MENU
SETUP
Language Picture Sound Parental Other
Password
Parental
Press ENTER to store the password.
SET +
CH –
CH +
Note: Now the rating is locked and the
setting cannot be changed unless you
enter the correct password.
ENTER
Off
Language Picture Sound Parental Other
SET –
Password
Parental
0–9/Cancel
/Enter/Setup/Return
SET +
CH –
CH +
0–9/Cancel
/Enter/Setup/Return
ENTER
SET –
Press
or
or
to select “Parental”, then press
until the level you require appears.
SET +
VCR MENU
SETUP
Language Picture Sound Parental Other
CH –
Password
Parental
CH +
ENTER
Press SETUP or RETURN to remove the parental control screen.
SET –
RETURN
/Enter/Setup/Return
Press
or
to select “Password”.
Press number buttons (0-9) to input a 4-digit password.
SET +
Language Picture Sound Parental Other
CH –
Password
Parental
CH +
ENTER
1234
SET –
0–9/Cancel
/Enter/Setup/Return
Press OPEN/CLOSE to activate parental control
setting.
OPEN/CLOSE
Notes:
• If each setup (pages 57~66) has been completed, the
unit can always be worked under the same
conditions (especially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult”. For
those discs, the age restriction will not work.
Function setup (DVD)
• Level Off: The parental control setting does not function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be played
back.
• Select from the level 1 to level 8. The limitation will be
more severe as the level number is lower.
Be sure to remember this number!
• If you input a wrong number,
press CANCEL.
61
J2D81001A (E)p58-61.p65
61
28/5/04, 1:54 PM
Function setup (DVD)
To change the parental level
OPEN/CLOSE
0–9
SETUP
RETURN
ENTER
▲/▼/ /
To change the parental level
Press SETUP in the stop mode or No Disc.
or
to select “Parental”.
Press
or ENTER.
Then press
Press
or
to select “Password”, then press
number buttons (0–9) to enter the password.
SET +
VCR MENU
SETUP
CH –
CH +
ENTER
Language Picture Sound Parental Other
Password
Parental
SET +
Password
Parental
0–9/Cancel
/Enter/Setup/Return
SET –
Press number buttons (0–9) to enter the password you have stored.
Language Picture Sound Parental Other
Password
Parental
0 9/Cancel
/Enter/Setup/Return
Press ENTER.
Now the parental level is changed and
locked.
SET +
CH –
CH +
Language Picture Sound Parental Other
ENTER
1234
SET –
Password
Parental
0–9/Cancel
/Enter/Setup/Return
9876
CH +
ENTER
Language Picture Sound Parental Other
SET –
CH –
Note: You can change the password
if you want.
Press ENTER.
The rating is now unlocked.
SET +
CH –
Language Picture Sound Parental Other
Password
Parental
CH +
ENTER
0 9/Cancel
/Enter/Setup/Return
Press SETUP or RETURN
to remove the parental control screen.
VCR MENU
SETUP
SET –
0–9/Cancel
/Enter/Setup/Return
Press
or
or
to select “Parental”, then press
to change the parental level.
SET +
CH –
Language Picture Sound Parental Other
Password
Parental
CH +
ENTER
SET –
0–9/Cancel
/Enter/Setup/Return
RETURN
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding 7 down on the remote control, press
STOP on the front panel. “PASSWORD CLEAR” appears on the screen.
5. Enter a new password again.
62
J2D81001A (E)p62-67.p65
62
28/5/04, 1:55 PM
Temporary disabling of rating level by DVD disc
OPEN/CLOSE
0–9
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
PLAY
▲/▼
RETURN
ENTER
Temporary disabling of rating level by DVD disc
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see page 42).
Enter the password with number buttons (0–9).
Then press ENTER.
If you interrupt the entering, press
RETURN.
PLAY
OPEN/CLOSE
Please enter the
4 - digit password
SET +
CH –
CH +
ENTER
Enter/0 9/Cancel/Return
SET –
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
Reading
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
If you wish to cancel the set rating level temporarily,
or , then
select “Parental Control Level” with
press ENTER. If the 4-digit password at step 2 on
page 62 has been set, the password entering
screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Playback will commence if the entered
password was correct.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
Function setup (DVD)
RETURN
SET +
CH –
CH +
ENTER
SET –
OPEN/CLOSE
63
J2D81001A (E)p62-67.p65
63
28/5/04, 1:55 PM
Function setup (DVD)
Setting OSD language
The setup language can be selected.
SETUP
RETURN
ENTER
▲/▼/ /
DVD
VCD
CD
Setting OSD language
Press SETUP in the stop mode or NO DISC.
or
Press
to select “Other”.
VCR MENU
SETUP
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
Language Picture Sound Parental Other
VCR MENU
SETUP
SET +
CH –
RETURN
/Enter/Setup/Return
CH +
ENTER
SET –
Press
or ENTER to select “OSD Language”.
SET +
If the unit does not operate properly: Static electricity,
etc., may affect the player's operation. Disconnect the
AC power cord once, then connect it again.
Language Picture Sound Parental Other
CH –
CH +
OSD Language English
ENTER
SET –
/Enter/Setup/Return
Press
or ENTER and then press
or
to
select desired language (e.g. English), then
press ENTER.
Language Picture Sound Parental Other
SET +
OSD Language English
CH –
CH +
ENTER
English
Francais
Espanol
SET –
/Enter/Setup/Return
64
J2D81001A (E)p62-67.p65
64
28/5/04, 1:55 PM
Setting language
You can select the language of “Menu”, “Subtitle” and “Audio” if their languages
are recorded onto the disc more than one language.
SETUP
RETURN
ENTER
▲/▼/ /
Setting language
Press SETUP in the stop mode or No Disc.
or
to select “Language”.
Press
VCR MENU
SETUP
Language Picture Sound Parental Other
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
VCR MENU
SETUP
SET +
RETURN
CH –
CH +
/Enter/Setup/Return
ENTER
SET –
Press
or ENTER, then press
desired langugage item.
or
to select
Note:
If the selected language is not recorded on the disc, the firstpriority language is selected.
SET +
Language Picture Sound Parental Other
CH –
Menu
Subtitle
Audio
CH +
ENTER
SET –
English
Automatic
English
/Enter/Setup/Return
Press
or ENTER.
or
to select your desired language,
Press
then press ENTER.
SET +
CH –
Function setup (DVD)
Language Picture Sound Parental Other
Menu
Subtitle
Audio
CH +
ENTER
SET –
English
Automatic
English
English
Francais
Espanol
Other
/Enter/Setup/Return
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see “Language code
list” on page 67).
Original: (Audio)
The unit will select the first priority language of each
disc.
Automatic: (Subtitle)
• The unit will automatically select the same language in
the AUDIO setting.
• When the unit selects the same language as the AUDIO,
the subtitles will not appear during playback.
• When you do not use the same language as the AUDIO,
the subtitles will appear during playback.
Off: (Subtitle)
Subtitles do not appear.
65
J2D81001A (E)p62-67.p65
65
28/5/04, 1:55 PM
Function setup (DVD)
VCR DVD
Selecting PROGRESSIVE scan
The progressive scan capability provides the highest resolution pictures with less
flicker and line structure.
If you are using the Component video jacks, but are connecting the DVD/VCR to
a standard (analog) television, set PROGRESSIVE to Off.
If you are using the Component video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set PROGRESSIVE to On.
DVD
VCD
CD
• Connect to a TV equipped with component jacks.
• Turn ON the TV and set it to the corresponding video input
mode.
• Set the S-VIDEO/COMPONENT video selector switch on
the rear panel to COMPONENT position.
• Press VCR DVD selector to select the DVD mode. (The
DVD indicator will light.)
Press PROGRESSIVE in the stop mode.
INPUT SELECT
PROGESSIVE
The progressive indicator “
display window will light.
There are two types of source content in pictures recorded in
DVD video discs: film content (pictures recorded from films
at 24 frames per second) and video content (video signals
recorded at 30 frames per second).
When the unit plays back a film source material, uninterlaced
progressive output signals are created using the original
information. When a video content is played back, the unit
interleaves lines between the interlaced lines on each to
create the interpolated picture and outputs as the progressive
signal.
” on the
• The unit recognizes the picture
source (film or video) of the current
disc according to the disc information.
Selecting PROGRESSIVE scan
Preparation:
Press PLAY to start playback.
PLAY
To select PROGRESSIVE scan Off
Press PROGRESSIVE in the stop mode.
The progressive indicator “ ” on the display window will
go off.
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteristics
or recording condition.
• If your TV does not accept the progressive scan format, the
picture will appear scrambled if you select progressive scan
output from the unit. In such a case, select PROGRESSIVE
scan Off.
• Once PROGRESSIVE scan On, all other video outputs are
disabled except component video outputs.
• You cannot make the progressive scanning mode active in
following cases.
– The unit is in the VCR mode.
– The disc is played back in the DVD mode.
– The S-VIDEO/COMPONENT video selector switch is set to
S-VIDEO position.
66
J2D81001A (E)p62-67.p65
66
28/5/04, 1:55 PM
Others
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 65).
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance2823 Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
Others
(DVD)
Function setup
Language Name Code
67
J2D81001A (E)p62-67.p65
67
28/5/04, 1:55 PM
Others
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD/VCR
DVD/VCR does not operate.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
–
–
30,42
14~17
22
No picture.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not set to the video
channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
equivalent).
• Channel is set to the external mode.
No sound.
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
14~19
–
31,44
The remote control does not function.
• Aim the remote control at the remote sensor.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
No Cable TV reception.
• Check all Cable TV connections.
• Station or Cable TV system problems, try another station.
16,17
TV recording does not work.
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
29,34
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER REC has not been pressed ( is not lit).
24
37
37
• Tracking adjustment beyond range of automatic tracking circuit. Try Manual
tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
31
Noise bars on screen.
14~19
–
–
13
VCR
31
–
DVD
Display is not shown in your language.
• Select proper language in the menu options.
64
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
42
Stopping playback, slow-motion play, repeat
play, or memory play, etc. cannot be
performed.
• Some discs may not do some of the functions.
–
• The S-VIDEO/COMPONENT selector is not set correctly.
No picture, or the screen is blurred or divided • The PROGRESSIVE scan is On through the unit is connected to a TV
into two parts.
via the VIDEO OUT or the S-VIDEO OUT jack.
19
66
No 4:3 (16:9) picture.
• The setup does not match your TV.
58
No on-screen display.
• Select Display “On”.
59
No surround sound.
• The setup does not match your stereo system.
20
The unit or remote operation key is not
functioning.
Playback does not start when the title is
selected.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
–
Audio soundtrack and/or subtitle language
is not changed when you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
65
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
56
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
54
• The function is prohibited with the unit or the disc.
44
appears on the screen.
• Check the Parental setup.
61,62
68
J2D81001A (E)p68-BACK.p65
68
28/5/04, 1:55 PM
Specifications
General
Power supply
Power consumption
Weight
Dimensions
Tuner
Antenna input/output
RF channel output
Color system
Video head
Audio track
Hi-Fi frequency response
Hi-Fi dynamic range
F.FWD/REW time at 25˚C (77˚F)
Applicable disc
Frequency range
S/N ratio
Harmonic distortion
Wow and flutter
Operating conditions
AC 120 V 60 Hz
Operation: 18 W, Stand by: 2 W
7.7 lbs (3.5 kg)
Width: 16-15/16 inches (430 mm)
Height: 3-7/8 inches (99 mm)
Depth: 8-13/16 inches (224.5 mm)
181 channel freq. synthesized
VHF
2-13
UHF
14-69
Cable TV 113 Channels
UHF/VHF In/Out: 75 Ω coaxial
Channel 3 or 4, Switchable
NTSC
4 Rotary heads
Hi-Fi sound - 2 Tracks / MONO sound - 1 Track
20 Hz to 20,000 Hz
More than 90dB
Approx. 1 minute and 48 seconds (with T-120 Cassette Tape)
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz
90dB (DVD)
0.02% (DVD)
Less than 0.01% Wrms
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal
Input/Output
DVD/VCR
1.0 V (p-p), 75 Ω, negative sync., pin jack x 2
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
–8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 2
–8 dBm, 1 kΩ, negative sync., pin jack (L/R) x 1
Video input
Video output
Audio input
Audio output
DVD
S-video output
Component video output
Others
Audio output (BITSTREAM/PCM
COAXIAL)
Audio output (BITSTREAM/PCM
OPTICAL)
Audio output (ANALOG)
S-VIDEO/COMPONENT video selector
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2
0.5 V (p-p), 75 Ω, pin jack x 1
Optical connector x 1
–12 dB, 1 kΩ, pin jacks (L, R) x 1
Slide switch x 1
Supplied accessories
Audio/video cable ................................................. 1
Remote control (SE-R0108) ................................. 1
Batteries (R03/AAA) ............................................. 2
75 ohm coaxial cable ............................................ 1
• Designs and specifications are subject to change without notice.
69
J2D81001A (E)p68-BACK.p65
69
28/5/04, 1:55 PM
Others
Limited warranty
70
J2D81001A (E)p68-BACK.p65
70
28/5/04, 1:55 PM
Others
71
J2D81001A (E)p68-BACK.p65
71
28/5/04, 1:55 PM
*J2D81001A*
04/06 K
J2D81001A (E)p68-BACK.p65
Printed in Thailand
72
31/5/04, 10:45 AM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:09:15 18:48:59+09:00
Create Date                     : 2004:09:15 18:48:48+09:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 32
Mod Date                        : 2004:09:15 18:48:59+09:00
Creation Date                   : 2004:09:15 18:48:48+09:00
Metadata Date                   : 2004:09:15 18:48:59+09:00

EXIF Metadata provided by EXIF.tools