ORION ELECTRIC M2F9A TV interface Device User Manual Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	535370
Application ID	iv8yPMpR3Mj/mz2Db1oZ2g==
Document Description	Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	186.58kB (2332258 bits)
Date Submitted	2005-04-22 00:00:00
Date Available	2005-04-22 00:00:00
Creation Date	2005-04-19 16:23:19
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-04-19 16:23:30
Document Title	Manual 2

0–9
ENTER
SET +/–
VCR MENU
To ADD/DELETE channels
Repeat the step 1 on page 30. Then press SET + or
– to select the “ADD/DELETE” and press ENTER.
CH SETUP
When you don't want to receive a weak signal broadcast, a Blue
back screen can be obtained by selecting the NO NOISE BACKGROUND “ON”. When the unit is shipped from the factory, the
NO NOISE BACKGROUND is set to “ON”.
TV CABLE
AUTO CH MEMORY
ADD/DELETE
Repeat the steps 1~2 on page 29 and press SET
+ or – to select “NO NOISE BACKGROUND”.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
+/Ð/ENTER/MENU
To Add or Delete desired channels
1) Press Direct channel selection buttons (0–9)
or SET +/– to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until “ADD” appears on the screen.
To delete channels
Press ENTER until “DELETE” appears on the
screen. The channel number will blink
Press ENTER to select “ON” or “OFF” position.
Press VCR MENU until the menu screen is
cleared.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
3) Repeat 1) to 2) to add or delete other channel.
ADD
CH 003
Basic setup
Noise elimination
+/Ð/0Ð9/ENTER/MENU
Press VCR MENU until the menu screen is
cleared.
31
2F90201A (E)p29-34
31
4/4/05, 9:02 PM
Playback (VCR)
Loading and unloading a cassette tape
Use only video cassette tapes marked
EJECT
Loading
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
Press EJECT on the front panel or on the remote.
Remove the cassette tape.
or
Automatic tape eject
This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning,
the cassette tape will be ejected automatically.
To prevent accidental erasure
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
To record again
Cover the hole with a piece of adhesive tape.
Screwdriver
Erase prevention tab
Adhesive tape
Tape speed and maximum recording time
Tape Speed
Video cassette tape
T-160
T-120
T-90
SP (Standard Play)
T-60
2-2/3 hours
2 hours
1-1/2 hours
1 hour
30 minutes
SLP (Super Long Play)
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
32
2F90201A (E)p29-34
32
4/4/05, 9:02 PM
T-30
DVD/VCR
Cassette tape playback
To play a prerecorded tape.
STOP
PLAY
FF
REV
DVD/VCR SELECT
Playback
Rewind or forward the tape
Preparation:
Stop the playback or recording via STOP on remote.
To rewind the tape:
Press REV.
Load a prerecorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
Playback (VCR)
• Turn ON the TV and select the corresponding video input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light).
To forward the tape:
Press FF.
To start playback
Press PLAY.
Playback will start. “ ” will appear
on the screen for about 4 seconds.
To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
Forward/Reverse picture search mode
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
“ ” will appear on the screen for
about 4 seconds.
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REV or
FF and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.
Notes:
• This VCR selects the playback tape speed SP, LP or SLP automatically.
• The Cassette tape and DVD disc can be played back simultaneously. If you press DVD/VCR SELECT, the tape playback
and DVD playback alternate with each other on the screen
(via CH3, 4 or video connection).
33
2F90201A (E)p29-34
33
4/4/05, 9:02 PM
Playback (VCR)
Special playback
CM SKIP
SET +/–
PLAY
PAUSE/STILL
FF
SLOW
REV
ATR
Picture search
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback, the
automatic tracking feature continuously analyzes the signal
to enable optimum picture quality during playback.
Reverse picture search function
Press REV once or twice during playback.
Forward picture search function
Press FF once or twice during playback.
To return to playback, press PLAY.
SPEED SEARCH TIMES
TAPE SPEED
PICTURE SEARCH SPEED
PRESS ONCE
PRESS TWICE
SP (Standard Play)
3X
5X
LP (Long Play)
7X
9X
SLP (Super Long Play)
9X
15 X
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET +/– to eliminate the noise. “MANUAL
TR.” will appear on the screen. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Press ATR to reactivate automatic tracking again.
“AUTO TR.” will appear on the screen.
Still picture
Press PAUSE/STILL during playback.
To resume normal playback, press PLAY or PAUSE/STILL.
Slow motion
During playback press SLOW.
To return to playback, press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the SET + /– to reduce the noise bars.
If the still picture jitters excessively, press SET +/– to
stabilize the still picture.
AUTO TR.
Notes:
• The audio output is muted during PICTURE SEARCH, STILL,
FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars. This is
not a defect.
• Playback will commence after approx. 5 minutes to protect
the video tape against excessive wear during pause mode.
Video head cleaning
Video head clogging
The video heads are the means by
which the DVD/VCR reads the picture
from the tape during playback. In the
Press PAUSE/STILL during playback.
unlikely event that the heads become
Press SLOW repeatedly: The picture advances frame by
dirty enough to be clogged, no picture
frame.
will be displayed. This can easily be
To return to playback, press PLAY or PAUSE/STILL.
determined if, during playback of a
known good tape, there is good sound,
but no picture (picture is extremely
snowy). If this is the case, have the
DVD/VCR checked and cleaned by
Press CM SKIP during playback. The DVD/VCR will search qualified service personnel.
Frame by frame picture
Good Picture
CM skip
Snowy Picture
forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of CM SKIP (maxi- Notes:
mum six presses) and then resume normal playback.
• DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR
For example
: 1 press: 30 seconds of tape
2 press: 60 seconds of tape
3 press: 90 seconds of tape
SERVICE THE UNIT BY REMOVING THE REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
34
2F90201A (E)p29-34
34
4/4/05, 9:02 PM
Convenience function
CALL
ZERO RETURN
SET +/–
ENTER
STOP
PLAY
CLOCK/COUNTER
VCR MENU
COUNTER RESET
Repeat playback
Zero return function
The entire video tape will play until its end. The tape will
automatically rewind to the beginning and the playback will be
repeated.
Press SET + or – to select “AUTO
REPEAT”.
Press CLOCK/COUNTER.
Press COUNTER RESET at the desired tape
position.
Press STOP when playback or recording is
completed.
Press ZERO RETURN.
The counter display shows the tape running time during playback or recording.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Playback (VCR)
Press VCR MENU.
This function rewinds the tape to the “00:00:00” counter position
automatically.
+/Ð/ENTER/MENU
Press ENTER to select “ON” or “OFF”.
If “ON” is selected, the playback will
be repeated endlessly.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
The counter display will be reset to
“00:00:00” position (e.g. the beginning
of recording).
+/Ð/ENTER/MENU
Press VCR MENU until the menu screen is
cleared.
If you press CALL, “
on the screen ! .
” will appear
The tape will automatically rewind or fast
forward to the “00:00:00” counter position.
To commence playback, press PLAY.
The playback will be repeated
endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select
“OFF” position. Press VCR MENU to return to the TV.
35
2F90201A (E)p35-40
35
4/4/05, 9:02 PM
Playback (VCR)
Convenience function (continued)
STOP
VISS +/–
CLOCK/COUNTER
DVD/VCR SELECT
Clock/counter display
Press CLOCK/COUNTER. The clock and tape counter
alternate with each other in the display window.
COUNTER
CLOCK
Press DVD/VCR SELECT. The DVD mode and the
VCR mode alternate with each other in the display.
DVD mode
Video index search system
This function enables you to locate the beginning of any recording
made on the VCR.
Recording an INDEX mark
The Index Search function automatically records an INDEX mark
on the tape whenever a recording
is initiated.
CH 001
INDEX
Index search
Press VISS + or – during stop or play mode.
For Succeeding programs: Press VISS +.
For Preceding programs: Press VISS –.
(As many as 9 index points can be accessed via this
method.)
When the VISS + or – is pressed,
the unit starts searching the INDEX
NO. selected and finds the portion,
then playback starts automatically.
To stop the Index Search, press
STOP.
or
is displayed
INDEX NO. (up to 9)
VCR mode
Notes:
• If you rewind the tape beyond “00:00:00”, a minus sign (“–”)
will be displayed in front of the time.
• When you load a tape, the counter will reset to “00:00:00”.
• The counter does not function on nonrecorded (blank)
sections of the tape. When you rewind, fast forward or play
tapes through blank sections, the counter stops.
Notes:
• When you record an INDEX mark at the very beginning of the
tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play at a
slightly different location.
• INDEX may not function properly with old or worn out video tapes.
• INDEX marks may not be found if it is extremely close to the point
where the search began.
• In recording, if you stop recording temporarily, the INDEX mark
is not recorded on the tape.
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
S-VHS system.
However, the picture will not have the high resolution of
S-VHS system.
Note: You cannot record S-VHS video format with this VCR.
36
2F90201A (E)p35-40
36
4/4/05, 9:02 PM
Recording (VCR)
DVD/VCR
0–9
Recording a TV program
Recording and viewing the same TV program.
CH +/–
SP/SLP
DVD/VCR SELECT
REC/OTR
Recording a TV program
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
The DVD/VCR will automatically turn on.
Press Number buttons or CH +/– to select the
channel to be recorded.
+0 
TV mode direct channel selection:
All channels can be instantly selected by using two
buttons. (for example, to select channel 2, press “0”, then
“2”. If you press only “2”, channel selection will be delayed
for two seconds.) For channels 10 and above, press the 2
digits in order.
CABLE mode direct channel selection:
Recording (VCR)
Load a cassette tape with the erase prevention
tab intact.
1-9
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
Press 0 twice and then 1-9 as required.
Example: To select “2”, Press 002.
10-12
Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for “12”.
13-99
Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
VHF/UHF/CABLE TV CHANNELS
TV
VHF
2-13
UHF
14-69
00 : 00 : 00 SP
CABLE TV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
Select “TV” or “CABLE” to the appropriate
position ! .
TV
- VHF/UHF channels
CABLE - Cable TV channels
Press REC/OTR.
“ ” will appear on the screen for
about 4 seconds and “REC” will
appear on the display window.
CH 110
INDEX
37
2F90201A (E)p35-40
37
4/4/05, 9:02 PM
Recording (VCR)
Recording a TV program (continued)
STOP
PAUSE/STILL
TV/VCR
To stop recording
Press STOP to stop recording.
“ ” will appear on screen for about
4 seconds.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted
material. Press again to continue the recording.
“
” will appear on screen for
about 4 seconds.
Notes:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
Recording one program while
watching another
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TV/VCR to select the TV position.
The “VCR” display will go off and recording will continue.
Select the TV channel you want to watch by using the
TV channel selector.
Note:
Some Cable TV hookups do not permit viewing one channel
while recording another. See pages & and ' .
38
2F90201A (E)p35-40
38
4/4/05, 9:02 PM
DVD/VCR
0–9
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
CH +/–
STOP
SP/SLP
DVD/VCR SELECT
REC/OTR
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded.
+0 
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
Recording (VCR)
Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, “ ” will appear on
the display.
Press SP/SLP to select the desired tape speed
SP or SLP.
Press Recording time
NORMAL REC
once
0:30
twice
1:00
3 times
1:30
4 times
2:00
5 times
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
Press Recording time
3:00
6 times
4:00
7 times
5:00
8 times
6:00
9 times
10 times NORMAL REC
OTR 0 : 30
CH 110
00 : 00 : 00 SP
INDEX
Set “TV” or “CABLE” option to the
appropriate position ! .
To cancel OTR
Press STOP or turn off the power.
TV
- VHF/UHF channels
CABLE - Cable TV channels
“
” will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press DVD/VCR SELECT to change to DVD mode
and perform the DVD playback "# .
39
2F90201A (E)p35-40
39
4/4/05, 9:02 PM
Recording (VCR)
DVD/VCR
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
SET +/–
ENTER
CANCEL
VCR MENU
EJECT
DVD/VCR SELECT
TIMER REC
Timer recording
Preparation:
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct % .
Example: Program a timer recording for the 26th day,
channel 125 (Cable TV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
START END
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
CH
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
〈+/Ð/ENTER/CANCEL/MENU 〉
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Press SET + or – to select the date, then press
ENTER.
DATE
START END CH
—:——
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
26(SA)
—:——
—:——
—:——
—:——
—:——
—:——
—:——
—:——
— ——
— ——
— ——
— ——
— ——
— ——
— ——
— ——
—
—
—
—
—
—
—
—
〈+/—/ENTER/CANCEL/MENU〉
• To return to the normal screen,
press VCR MENU twice.
Set the start time, end time, channel and tape
speed as in step 3.
DATE
START END
26(SA)
11:00PM 11:30PM 125 SLP
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
—:——
—:——
—:——
—:——
—:——
—:——
—:——
CH
— ——
— ——
— ——
— ——
— ——
— ——
— ——
〈+/—/ENTER/CANCEL/MENU 〉
—
—
—
—
—
—
—
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to “L1” or
“L2”.
40
START END
11:00PM 11:30PM 125 SLP
—:——
—:——
—:——
—:——
—:——
—:——
—:——
CH
— ——
— ——
— ——
— ——
— ——
— ——
— ——
—
—
—
—
—
—
—
〈+/—/ENTER/CANCEL/MENU 〉
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
Notes:
• The timer recording will start at 5 seconds before the time
you predetermined.
• If the timer symbol (
) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded ! .
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed ! .
• During Timer recording, the power cannot be turned off.
Notes:
• If the timer symbol ( ) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press TIMER REC at first, then press
DVD/VCR SELECT to change to VCR mode. After you use the
VCR, press TIMER REC again to put the VCR into timer
recording standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock % and
reprogram any timer recording.
40
2F90201A (E)p35-40
DATE
26(SA)
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
Press SET + or – to select one of the program
line, then press ENTER.
DATE
To enter other programs, repeat steps 2
through 4.
Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.
+/Ð/ENTER/MENU
4/4/05, 9:02 PM
SET +/–
ENTER
CANCEL
VCR MENU
DVD/VCR SELECT
TIMER REC
Setting
procedure
To set
daily/weekly
timer
To confirm or cancel a program
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MOSA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At step 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
If the Timer has been activated, press TIMER
REC to deactivate the Timer.
To confirm Timer program:
The timer symbol ( ) will
disappear. Then press DVD/VCR
SELECT to change to VCR mode.
When you press SET – repeatedly, the
DATE indicator will change as follows, in
this case the day is Friday.
Recording (VCR)
The current day (Friday)
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
minus one day
MO-FR (Monday to Friday)
WKL-WE
(Weekly Wednesday)
WKL-TH (Weekly Thursday)
DATE
WKL-WE
START END
At step 1 on the previous page select “TIMER REC
SET” and press ENTER.
The timer program list will appear on the screen.
CH
〈+/Ð/ENTER/CANCEL/MENU〉
If the programs overlap another
9 : 00
10 : 00
START END
11:00PM 11:30PM 125 SLP
CH
〈+/—/ENTER/CANCEL/MENU〉
To cancel Timer program:
Press SET + or – to select the unwanted program,
then press CANCEL to cancel the program.
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00
DATE
26(SA)
DATE
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
11 : 00
Program 1
START END
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
CH
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
〈+/Ð/ENTER/CANCEL/MENU 〉
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Control Settings
Prog.2
Prog.1
Prog.3
Press VCR MENU repeatedly until the menu
screen is cleared.
Notes:
• The daily/weekly recording can be made continuously until the
recording is canceled or the tape reaches the end.
Notes:
• During timer recording the automatic rewinding mechanism
• If there are other timer record programs remaining, TIMER
does not function.
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer recording
operation.
• You can correct or cancel a programmed setting in program
confirm mode.
41
2F90201A (E)p41-44
41
4/4/05, 9:02 PM
Other functions (VCR)
Stereo recording and playback/
Second Audio Program (SAP)
ENTER
SET +/–
VCR MENU
AUDIO SELECT
Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.
When a MTS STEREO broadcast is received, “STEREO” will
appear on the screen for about 4
seconds and the program can
be viewed or recorded in stereo.
The Hi-Fi stereo recording procedure is the same as for normal
recordings.
STEREO
Second Audio Program (SAP)
Your DVD/VCR is fitted with a SAP broadcast system which
enables you to switch to a second audio program when viewing a selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
Press VCR MENU. Then press SET + or – to
select “SAP”.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Note:
When using a Cable TV system, stereo TV programs may
be transmitted over a mono cable channel. In this case
“STEREO” will not appear and the sound will be in mono.
Output selection
When viewing an MTS stereo TV program, or playing a
prerecorded VHS Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The “R”
and “L” positions allow the audio from the Right or Left HiFi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape or
TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for
several seconds. Refer to the chart below.
OUTPUT
SELECTION
SOUND HEARD ON BOTH
SPEAKERS
STEREO
L ch
R ch
MONO
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
+/Ð/ENTER/MENU
Press ENTER to select “ON”.
Then press VCR MENU until the
menu screen is cleared.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
Listening to SAP
When the VCR is turned on or a channel selection is
made, make certain the letters “SAP” appears on the
screen for about 4 seconds. This means that the “Second
Audio Program” broadcasting is available.
STEREO SAP
5)2
OR
Notes:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cable not connected),
the sound will be monaural.
42
2F90201A (E)p41-44
42
4/4/05, 9:02 PM
DVD/VCR
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate
a previously recorded tape. Make all connections before turning on the power.
INPUT SELECT
STOP
SP/SLP
DVD/VCR SELECT
REC/OTR
Duplicating a video tape
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
Connection with second VCR
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
It is recommended that you set the
tape speed to the SP mode on the
recording VCR for best results.
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
Other functions (VCR)
Press SP/SLP to select the desired tape speed
SP or SLP.
Recording VCR
To VIDEO IN
“L1” or “L2” will appear in the display.
To AUDIO (R) IN
To AUDIO (L) IN
Connection with Camcorder
L1: on the rear panel
L2: on the front panel
Press PLAY on the playback VCR or Camcorder.
Press REC/OTR on the recording VCR.
Playback Camcorder
To AV Jack
Recording VCR
The duplicating process begins.
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Press STOP after duplicating a video tape.
AUDIO/VIDEO cable (not supplied)
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
43
2F90201A (E)p41-44
43
4/4/05, 9:02 PM
Other functions (VCR)
DVD/VCR
Recording a DVD/CD disc
You can record disc material in DVD, Audio CD, etc. onto a Video
tape with this DVD/VCR.
STOP
PLAY
SP/SLP
DVD/VCR SELECT
REC/OTR
Duplicating a DVD or CD disc
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.
Press SP/SLP to select the desired tape speed
SP or SLP.
Notes:
• You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
• When the scanning mode is set to the progressive mode,
you cannot duplicate a disc material onto a video tape.
When REC/OTR is pressed, the PROGRESSIVE indicator
“ ” on the display window will flash and “Please Set
Off” will appear on the screen.
• You cannot record discs encoded with copy guard
function. The following icon and text will show up on the
TV screen.
DISC IS COPY PROTECTED
00 : 00 : 00 SP
Press DVD/VCR SELECT selector to select the
DVD mode.
Press PLAY to start playback.
Press REC/OTR to start recording.
Press STOP if you finish recording.
The DVD indicator will light.
The DVD/VCR will change to the
VCR mode automatically and the
playback picture or sound will be
duplicated on the video cassette
tape.
If you wish to stop a DVD/CD disc,
press DVD/VCR SELECT selector to
change the DVD mode, then press
STOP.
44
2F90201A (E)p41-44
44
4/4/05, 9:02 PM
Basic playback (DVD)
DVD/VCR
Playing a disc
This section shows you the basics on how to play a disc.
VCR/DVD SELECT
ON/STANDBY
CAUTION
Keep your fingers well clear of the
disc tray as it is closing. Neglecting
to do so may cause serious
personal injury.
Display window
DVD
VCD
CD
Disc tray
STOP
C/D/B/A
ENTER
PLAY
OPEN/CLOSE
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This
may include S-video or component video inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input
connected to the DVD/VCR.
Press DVD/VCR on the remote control to
operate the DVD/VCR.
Press OPEN/CLOSE or PLAY on the unit.
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading Disc” and then playback
commences.
OR
Press
ON/STANDBY.
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
The DVD/VCR turns on.
Reading Disc
Press VCR/DVD SELECT to select the DVD mode.
Press OPEN/CLOSE.
The DVD indicator will light.
Press
Press ENTER.
Press STOP to end playback.
or
Basic playback (DVD)
to select title.
The disc tray opens.
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD/VCR to malfunction.
• Do not place a disc which is unplayable in this
DVD/VCR.
• Title is selected and play
commences.
• The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
45
2F90201A (E)p45-48
45
4/4/05, 9:03 PM
Basic playback (DVD)
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About DVD VCD CD CARD
C/D/B/A
The DVD VCD CD icons on the heading bar show the playable discs for the
STOP
function described under that heading.
PLAY
DVD : You can use this function with DVD video discs.
PAUSE/STILL
VCD : You can use this function with Video CDs.
DVD/CARD
CD
DVD/VCR SELECT CARD : You can use this function with Audio CDs and CD-R/RW CDs.
: You can use this function with Media cards.
OPEN/CLOSE
POWER
DVD
VCD
CD
Basic playback
To pause playback (still mode)
Press PAUSE/STILL during playback.
To resume normal playback, press
PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Playing a Disc while the VCR section is recording
or standing by for timer recording
1) Start to record.
Follow steps 1~5 on page 37.
• If the DVD/VCR is standing by for recording, turn on
the DVD/VCR.
2) Press DVD/VCR SELECT selector to select DVD mode.
3) Play a disc.
Follow steps 4 ~ 6 on page 45.
• Press PLAY if the DVD/VCR does not start to play a
disc automatically.
4) Stop to play.
Press STOP to stop play back a disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again 10 $ .
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,
“Reading Disc” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 54.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to
the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the
unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
• The screen saver does not operate when connecting the DVD video player to the TV using the HDMI cable.
• If the Media card is inserted during the playback, playback will stop and change to the CARD mode automatically. If you wish
to change to the DVD mode, press DVD/CARD.
46
2F90201A (E)p45-48
46
4/4/05, 9:03 PM
Playing a disc (continued)
You can play discs at various speeds.
PAUSE/STILL
PLAY
FF
SLOW
REV
SKIP /
DVD
VCD
CD
Playing in fast reverse or fast forward directions
Press REV or FF during playback.
To resume normal playback
Press PLAY.
REV: Fast reverse playback
FF: Fast forward playback
Each time you press REV or FF, the
playback speed changes.
DVD
VCD
Notes:
• The DVD/VCR mutes sound and subtitles during reverse
and forward scan of DVD/VCD video discs. However, this
unit plays sound during fast forward or fast reverse play of
audio CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STILL during still playback.
To resume normal playback
Press PLAY.
Each time you press PAUSE/STILL,
the picture advances one frame.
Basic playback (DVD)
Note:
The sound is muted during frame by frame playback.
DVD
VCD
Playing in slow-motion
Press SLOW (
) during playback.
Each time you press the button, the
slow-motion speed changes.
DVD
VCD
CD
To resume normal playback
Press PLAY.
Note:
The sound is muted during slow-motion playback.
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
Notes:
• A “Prohibition” symbol
may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/
VCR.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
47
2F90201A (E)p45-48
47
4/4/05, 9:03 PM
Advanced playback (DVD)
Zooming/Locating desired scene
0–9
DISPLAY
SEARCH
C/D/B/A
ENTER
CLEAR
ZOOM
DVD
VCD
CD
Zooming
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
D/B
B/A
A to view a different part of the
Press C/D
frame.
You may move the frame from the
center position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD
VCD
CD
Locating desired scene
Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to play back. To check the title, chapter and time, press DISPLAY.
Press SEARCH during playback or stop mode.
Time
/6
Title
Chapter
/Enter/0 9/Clear/Search
• “Time” only works in playback
or resume stop mode.
Time
/6
Title
12
Chapter
/Enter/0 9/Clear/Search
• If you input a wrong number, press
CLEAR.
• Refer to the package supplied with
the disc to check the numbers.
Press C or D to select the “Time”, “Title” or
“Chapter”.
Time
/6
Title
Chapter
/Enter/0 9/Clear/Search
Press Number buttons (0–9) to change the
number.
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1 of
the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC
54
48
2F90201A (E)p45-48
48
4/4/05, 9:03 PM
Marking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
C/D
ENTER
CLEAR
MARKER
DVD
VCD
Marking the scenes
Press MARKER during playback.
DVD
VCD
Returning to the scenes
Press MARKER during playback or stop mode.
Marker 1
Marker 2
Marker 3
/Enter/Clear/Marker
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
/Enter/Clear/Marker
Press C or D to select the Marker 1-3.
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
/Enter/Clear/Marker
• Repeat this procedure to set the
other 2 scenes.
Marker 1 00 27 54
Marker 2
Marker 3
/Enter/Clear/Marker
Playback starts from the marked
scene.
Press MARKER to remove this display.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or
turn the power off.
• Some subtitles recorded around the marker may fail to
appear.
Advanced playback (DVD)
Press ENTER.
49
2F90201A (E)p49-52
49
4/4/05, 9:03 PM
Advanced playback (DVD)
Repeat playback/A-B Repeat playback
D/B/A
PLAY
PLAYMODE
A-B RPT
DVD
VCD
CD
DVD
VCD
CD
Repeat playback
Press PLAYMODE during playback or stop mode.
A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
Press A-B RPT during playback.
The start point is selected.
[DVD]
A to select “Chapter” or “Title”.
Press B/A
Repeat
Off
/Play Mode
The unit automatically starts repeat
playback after finishing the current title or chapter.
Press A-B RPT again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, returns to Point A automatically, then
starts again.
[Audio CD, Video CD, MP3/WMA CD]
Press D to select “Repeat”.
A to select “Track” or “All”.
Press B/A
Play Mode
Repeat
/Play Mode
A B
Off
Off
The unit automatically starts repeat
playback after finishing the current
track.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
Press PLAYMODE again to make the screen
disappear.
To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohibited during playback.
To resume normal playback
Press A-B RPT again.
“
Off ” appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
• A-B Repeat is prohibited when PBC is on.
50
2F90201A (E)p49-52
50
4/4/05, 9:03 PM
Program playback/Random playback
0–9
You can arrange the playback order of tracks or files on the disc. And
also the unit selects tracks or files at random and playback them.
These feature works for Audio CD, Video CD and MP3/WMA/JPEG
CD.
VCD
CD
C/D/B/A
ENTER
CLEAR
PLAY
SKIP
PLAYMODE
Program playback
Press PLAYMODE during stop mode.
D to select Play Mode, then press
Press C/D
B/A
A to select “Program”.
Play Mode
Repeat
/Play Mode
Off
Off
D/B
B/A
A to select “Program Playback”
Press C/D
and press ENTER.
The programs you selected will start to playback in
the order.
• In case of JPEG file, press SKIP
Play Mode
Repeat
Clear
: Program
: Off
10
11
12
Program Playback
/Enter/0 9/Clear/Play Mode
D or B/A
Press C/D
A to select the programming
position. Use Number buttons (0–9) to input the
track or file numbers.
Play Mode
Repeat
Clear
VCD
CD
: Program
: Off
10
11
12
Program Playback
/Enter/0 9/Clear/Play Mode
■ To change the program
1. In the program mode, press C/D/B /A to select the track
number.
2. Press Number buttons (0–9) to select the track number
to be replaced.
■ To clear the program one by one
In the program mode, press C/D/B/A to select the track
number. Then press CLEAR.
■ To clear all the programs
In the program mode, press C/D/B/A to select “Clear”.
Then press ENTER.
Advanced playback (DVD)
• To program others, repeat step 3.
• If you input a wrong number, press
CLEAR.
19
23
3 11
to continue
the program playback.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Play Mode
: Program
Repeat
: Off
19
10
23
11
3 11 6
12
Clear
Program Playback
/Enter/0 9/Clear/Play Mode
Notes:
• In playing back the Video CD with PBC, you cannot set
Program playback.
• The program is cancelled when you open the disc tray or
turn the power off.
Random playback
Press PLAYMODE during playback or stop
mode.
D to select Play Mode, then press
Press C/D
B/A
A to select “Random”.
Play Mode
Repeat
/Play Mode
Random
Off
Press PLAY.
The Random Playback will start.
• If you set “Random” during playback mode,
Random playback will begin after the track that is
currently being played has ended.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Note:
In playing back the Video CD with PBC, you cannot set
Random playback.
51
2F90201A (E)p49-52
51
4/4/05, 9:03 PM
Advanced playback (DVD)
Changing angles/Title selection/DVD menu
MENU
C/D/B/A
ENTER
PLAY
TOP MENU
ANGLE
DVD
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
Press ANGLE during playback.
The current angle will appear.
Press ANGLE repeatedly until the desired angle
is selected.
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
DVD
Title selection
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
Press TOP MENU during playback.
D/B
B/A
A to select the desired title.
Press C/D
Title menu appears on the screen.
Press ENTER or PLAY.
The playback of the selected title will
start.
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
DVD
DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
Press MENU during playback.
The DVD menu appears on the screen.
• Press MENU again to resume
playback at the scene when you
pressed MENU.
A to select the desired item.
B/A
D/B
Press C/D
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
Note:
Depending on the DVD, you may not be able to resume playback
from the scene point when you pressed MENU.
52
2F90201A (E)p49-52
52
4/4/05, 9:03 PM
Changing soundtrack language/
Setting surround sound
B/A
AUDIO
DVD
VCD
Changing soundtrack language
You can select the language when you play a multilingual disc.
Press AUDIO during playback.
The current soundtrack language will
appear.
In case of Video CD playback
Audio type changes as follows each time you press
AUDIO.
LR
QSound Off
QSound Off
QSound Off
2/8 Fra Dolby Digital
QSound Off
Press AUDIO repeatedly until the desired language is selected.
1/8 Eng Dolby Digital
QSound Off
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
• The on screen display will disappear after a few
seconds.
Setting surround sound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.
During disc playback press AUDIO.
1/8 Eng Dolby Digital
QSound Off
Press B or A to select “On”.
1/8 Eng Dolby Digital
QSound On
• The on screen display will disappear after a few
seconds.
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select the
“Off” position.
Notes:
• The “QSound” is effective only for the sound of disc.
• The QSound setting can also be changed in the function
setting $ .
Advanced playback (DVD)
DVD
VCD
CD
Manufactured under license from QSound Labs,
Inc. U.S. patent Nos. 5,105,462, 5,208,860 and
5,440,638 and various foreign counterpart.
Copyright QSound Labs, Inc. 1998-2002.
QXpander™ is a trademark of QSound Labs, Inc.
All rights reserved.
53
2F90201A (E)p53-58
53
4/4/05, 9:03 PM
Advanced playback (DVD)
Subtitles/To turn off the PBC
C/D/B/A
ENTER
SUBTITLE
PLAYMODE
DVD
To turn off the PBC (Video CD version 2.0)
Subtitles
When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.
Press PLAYMODE in the stop mode.
Press / to select Play Mode, then press
/ to select “Off”.
Press SUBTITLE repeatedly during playback
until your desired language appears.
1/8 Eng
Play Mode :
Repeat
/Play Mode
To turn off the subtitle, press SUBTITLE until
“Off” appears.
Off
• The on screen display will disappear after a few
seconds.
Notes:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
• In some cases, a selected subtitle language may not be
changed immediately.
Press PLAYMODE again to make the screen
disappear.
To turn on the PBC
Follow the above steps 1~2, then press
“PBC”.
54
or
to select
Note:
You can also turn off the PBC by pressing number button 1
and ENTER in the stop mode.
54
2F90201A (E)p53-58
Off
Off
4/4/05, 9:03 PM
MP3/WMA/JPEG operation
This player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R, CD-RW or Media card. To produce
the MP3/WMA JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding Software (not
supplied). The Apple-HFS-System cannot be played.
Note:
This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats
(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot
guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this
owner’s manual are meant as a guide only.
Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted
content, including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof.
Toshiba has no right to grant and does not grant permission to download any copyrighted content.
MP3/WMA/JPEG file information
Limitations on MP3/WMA/JPEG file playback
• MP3/WMA/JPEG file is the disc/card that is standardized by ISO9660, its file name must include 3-digits extension
letters, “mp3”, “wma”, “jpg”.
• MP3/WMA/JPEG file must be correspond to the ISO standardized files.
• This unit can read 600 files per disc/card. If one directory has more than 600 files, it reads up to 600 files, the
remaining files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc/card.
• MP3/WMA/JPEG files cannot be used for the purpose of recording.
• If the disc/card has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG file in the recorded order,
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs/Cards cannot be played back depending on the recording conditions.
• The CDs/Cards that has no music data or non MP3/WMA/JPEG files cannot be played back.
Advanced playback (DVD)
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
Microsoft, Windows Media, and Windows Logo are trademarks or registered trademarks of Microsoft Corporation in both the
United States and other countries.
55
2F90201A (E)p53-58
55
4/4/05, 9:03 PM
Advanced playback (DVD)
MP3/WMA/JPEG operation (continued)
0–9
CAUTION
Do not insert any foreign objects into the Media card slot as this
can result in a risk of fire or electric shock.
TOP MENU
▲/▼/ /
ENTER
STOP
PLAY
Place a CD-R/RW on which MP3, WMA or JPEG files have
been recorded onto the disc tray or insert a Media card on
which MP3, WMA or JPEG files have been recorded into
the media card slot on the front panel.
CD
CARD
MP3/WMA CD playback
Place a CD-R/RW on which MP3 or WMA files
have been recorded onto the disc tray, or insert
a Media card on which MP3 or WMA files have
been recorded into the appropriate media card
slot on the front panel.
Note: When the Media card is inserted, the unit is
changed to the CARD mode automatically.
Press DVD/CARD to select the DVD (CD) mode or
the CARD mode.
A file menu screen will appear on the screen.
A or ENTER to select folder.
Press B/A
CD
DVD/CARD
Pops
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
-/72 --:-flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
D/B
B/A
A or Number buttons (0–9) to sePress C/D
lect the desired file.
Press STOP to end playback.
• The unit records the stopped point. “ ” appears on
the screen. Press PLAY to resume playback (from the
scene point).
• If you press STOP again, unload the disc or change
the DVD mode and the CARD mode, the unit will clear
the stopped point.
To eject the Media card
Confirm the Media card is not in use now. Pull the card out
slowly and straight.
Note:
Do not remove the card while it is in use. If removed while in
use, information on the card may be lost.
About file menu
Operation
Elapsed time
Media type
File number
Folder
CD
/0-9/Enter/Play Mode/Menu
• In case the folder includes more than 15 files, press B
or A to display next file list.
-/72
CD
--:--
-/72
CD
--:--
Pops
Pops
flower
15
Mother
Lies and Truth-
16
Hold Your Last
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE
11
Rain
winter fall
Honey
12
Strawberry
BLUE EYES
13
Welcome party
Blurry Eyes
14
Thailand
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
• When PLAY has been pressed after displaying the file
menu, or when the disc tray has been closed using
PLAY, playback begins automatically starting from the
first file. In this case, if the first file is an MP3/WMA file,
only MP3/WMA files are played back in order. If the
first file is a JPEG file, the first JPEG file is played back.
Press ENTER.
The selected file starts playing back.
56
2F90201A (E)p53-58
56
Notes:
• The picture menu is displayed when the FUJICOLOR CD
or the Kodak Picture CD are played. To display the file
menu, press TOP MENU.
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• MP3 or WMA file on the Kodak Picture CD is not recognized on this unit.
Notes:
• During MP3/WMA/JPEG-Playback, you cannot use SEARCH,
A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG Playback # 51 .
• When the Media card is inserted into the both card slots, the
upper card slot is read. If you want to playback the
CompactFlash memory card in the lower card slot, eject the
Media card from the upper card slot.
4/4/05, 9:03 PM
0–9
TOP MENU
MENU
▲/▼/ /
ENTER
PLAY
STOP
SKIP /
PAUSE
ANGLE
DVD/CARD
CAUTION
Do not insert any foreign objects into the Media card slot as this can result in
a risk of fire or electric shock.
CD
CARD
CD
JPEG playback
CARD
Place a CD-R/RW on which JPEG files have been
recorded onto the disc tray, or insert a Media card
on which JPEG files have been recorded into the
appropriate media card slot on the front panel.
Note: When the Media card is inserted, the unit is
changed to the CARD mode automatically.
Press DVD/CARD to select the DVD (CD) mode or
the CARD mode. file menu screen will appear on
the screen. Press B/A to select folder.
CD
Collection
Pic-1
Pic-2
Pic-3
Pic-4
Pic-5
Pic-6
Pic-7
-/36
8 Pic-8
9 Pic-9
10 Pic-10
11 Pic-11
12 Pic-12
13 Pic-13
14 Pic-14
/0-9/Enter/Play Mode/Menu
D/B
B/A
A or Number buttons (0–9) to sePress C/D
lect the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
Press B/A or C/D to select the desired file.
Press ENTER. The selected picture appears on
the screen.
Rotating an image
You can rotate an image by 90 degrees by pressing
ANGLE during playback of the image.
“
”, “
”, “
” or “
” appears briefly
on the screen.
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
The slide show enables you to view pictures (files) one after
another automatically.
Preparation:
Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”
or “15 Seconds” $ .
Select your desired starting file for the slide
show in the step 4 as left.
Press ENTER to start slide show from the selected file.
• If you press PAUSE during the slide show, the slide
show stops temporary. “ 4 ” appears briefly on the picture.
If the picture appears upside down or sideways, press
ANGLE repeatedly until it’s right side up.
“
”, “
”, “
” or “
” appears briefly
on the screen.
again to resume the slide show.
Press PLAY or SKIP
• When the slide show playback finished the file list appears.
• To stop the slide show, press STOP. The file list appears.
To eject the Media card
Confirm the Media card is not in use now. Pull the card out
slowly and straight.
Notes:
Advanced playback (DVD)
• To display next list, press SKIP
/ .
• When PLAY has been pressed after displaying
the file menu, or when the disc tray has been
closed after pressing PLAY, playback begins automatically starting from the first file. In this case,
if the first file is a JPEG file, the first JPEG file is
played back. If the first file is an MP3/WMA file,
only MP3/WMA files are played back in order.
JPEG slide show
• Do not remove the card while it is in use. If removed while in
use, information on the card may be lost.
• If the DVD video player is connected to a HDTV using
HDMI, you can display the HD resolution JPEG images
(720p or 1080i). See “HD Jpeg” on page 62.
• When the Media card is inserted into the both card slots, the
upper card slot is read. If you want to playback the
CompactFlash memory card in the lower card slot, eject the
Media card from the upper card slot.
57
2F90201A (E)p53-58
57
4/4/05, 9:03 PM
Function setup (DVD)
Customizing the function settings
You can change the default settings to customize performance
to your preference.
C/D/B/A
ENTER
RETURN
SETUP
DVD
VCD
CD
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
To make SETUP screen disappear, press
SETUP or RETURN.
/Enter/Setup/Return
Press B or A to select the desired section, then
press D or ENTER.
Press C or D to select the desired option.
Change the selection using B or A, by referring
to the corresponding pages 60~63.
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing C
repeatedly.
58
2F90201A (E)p53-58
58
4/4/05, 9:03 PM
Customizing the function settings (continued)
Setting details
Section
Option
Details
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if more than one language are available on
the disc.
E.B.L.
To select On or Off for E.B.L. (Enhanced Black
Level).
60
TV Screen
To select a picture size according to the aspect
ratio of your TV.
60
Display
To turn on or de-activate the operational status display on the screen.
60
Picture Mode
To select a preferred picture mode from “Video”,
“Film” or “Auto”.
61
JPEG Interval
To select a preferred setting for the slide show playback.
61
Dialogue
To select On or Off for DRC (Dynamic Range Control).
61
QSound
To select On or Off for QSound.
61
Digital Out
To select an output sound format corresponding to
your system connection.
61
Password
Input 4-digit password to set the parental level.
62
Parental
To select a preferred parental level for the parental
setting.
62
Select Files
To select a preferred file type for playing back a CD
containing a mixture of file types.
62
HD Jpeg
To select On or Off for HD Jpeg.
62
Output
To select a preferred video output signal from “Progressive” or “Interlace”.
62
Page
60
Function setup (DVD)
59
2F90201A (E)p59-63
59
4/4/05, 9:03 PM
Function setup (DVD)
Customizing the function settings (continued)
Setting details
Menu
Subtitle
Audio
English
English
English
E.B.L.
Off
4:3
TV Screen
On
Display
Picture Mode Auto
JPEG Interval Off
/Setup/Return
/Setup/Return
Menu, Subtitle, Audio
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
“Language code list” $# ).
Original: (Audio)
The unit will select the first priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Notes:
• If the selected language is not recorded on the disc, the
first-priority language is selected.
• If you want to change the OSD language, you can perform
it by VCR MENU $ .
E.B.L.
To select the black level of playback pictures, set your
preference and monitor’s ability.
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
TV Screen
You have the following screen sizes to choose from:
4:3
(Letter box):
Select this mode when connecting to a conventional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
(Pan scan):
4:3
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
16:9
(Wide):
Select this mode when connecting to a widescreen TV. A wide screen picture is displayed full
size.
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
Display
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
60
2F90201A (E)p59-63
60
4/4/05, 9:03 PM
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Dialogue Off: DRC (Std)
QSound
Off
Digital Out
PCM
/Setup/Return
Dialogue
Auto:
Film:
Select this position normally.
The DVD player automatically detects
source content, film or video, of
playback source, and converts that
signal in the progressive output format
in an appropriate method.
The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures. The
progressive output feature will be most
effective under this selection.
Video: The DVD player filters video signal,
and converts it in the progressive
output format appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select “Video”.
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a “QSound”. It can
produce the effect of being in a cinema or a concert hall.
JPEG Interval
You can continuously play back all JPEG files automatically.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
Note:
The QSound setting can also be changed with AUDIO on
the remote control #! .
Digital Out
Function setup (DVD)
On: The QSound operates.
Off: The QSound is disengaged.
Selected the output sound format corresponding to your
system connection.
PCM:
Select when connected to a 2 channel digital
stereo amplifier.
Raw:
Disc audio raw data will be output.
Notes:
• When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select “PCM” or “Raw”.
• If apply HDMI connection to TV, make sure to select
“PCM”, audio signal passing to TV via HDMI cable.
61
2F90201A (E)p59-63
61
4/4/05, 9:03 PM
Function setup (DVD)
Customizing the function settings (continued)
Setting details
Password
---Parental
Off
Select Files
All
HD Jpeg
Off
Output
Interlace
/0-9/Enter/Clear/Setup/Return
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding 7 down on the remote control, press
STOP on the front panel. “PASSWORD CLEAR”
appears on the screen.
5. Enter a new password again.
Parental control setting
Select Files
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the
unit.
1) Press C or D to select “Parental”, then press B or
A until the level you require appears.
• Level Off: The parental control setting does not
function.
• Level 8: Virtually all DVD software can be
played back.
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting cannot
be changed unless you enter the correct password.
4) Press OPEN/CLOSE to activate Parental control
setting. (See “Temporary disabling of rating level by
DVD disc” on page 64.)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
To change the parental level
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B or
A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
When playing back a CD or Media card containing a
mixture of MP3, WMA and JPEG files, only MP3/WMA
or JPEG files can be displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
HD Jpeg
This DVD video player equipped with a “HD Jpeg”. It can
display the HD resolution JPEG images when the DVD
video player is connected to a HDTV using HDMI.
On:
Select when you connect the DVD video player to
a HDTV via HDMI OUT jack. JPEG images is displayed in suitable picture quality (480p, 720p or
1080i)
Off:
The picture processing quality is fixed to 480p.
Notes:
• When the DVD video player is not connected to a TV
using HDMI, you cannot select “On”.
• When HD Jpeg is set to “On”, zoom function is prohibited
and component video outputs disabled when 720p or
1080i is selected.
62
2F90201A (E)p59-63
62
4/4/05, 9:03 PM
Output
You can select the video output signal of the DVD
video player to the TV from “Interlace” or “Progressive”.
1) Press C or D to select “Output”.
2) Press A, then press C or D to select “Interlace” or
“Progressive”.
Interlace:
Select when connecting to a composite TV or a TV
equipped with component video inputs but
progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped with
component video inputs, progressive scan
compatible.
3) Press ENTER.
Warning:
Once “Progressive” is selected when connecting to a
TV progressive scan incompatible, no image will be
seen on the video display.
In this case, you must reset the unit by pressing STOP
on the front panel for five seconds. The video output
will be restored to “Interlace” setting, and a picture will
once again be seen on a conventional analog display.
Function setup (DVD)
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteristics or recording condition.
• Once Progressive scan on, the VIDEO (yellow) and SVIDEO outputs are disabled.
Note:
If each setup (pages 60~63) has been completed, the unit
can always be worked under the same conditions
(especially with DVD discs).
Each setup will be retained in the memory even if you
turn the power off.
63
2F90201A (E)p59-63
63
4/4/05, 9:03 PM
Function setup (DVD)
Temporary disabling of rating level by DVD disc
0–9
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
▲/▼
ENTER
RETURN
PLAY
OPEN/CLOSE
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit "# .
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press RETURN.
Please enter the
4 - digit password
Enter/0 9/Clear/Return
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading Disc” screen will change, depending
on which disc is played. If you select “YES” with
the ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
Reading Disc
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
Playback will commence if the entered password was correct.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
If you wish to cancel the set rating level temporarily, select “Parental Control Level” with C or
D, then press ENTER. If the 4-digit password at
step 2 on page 62 has been set, the password
entering screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or
have forgotten) the password, select “Cancel
Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
64
2F90201A (E)p64-69
64
4/4/05, 9:03 PM
Others
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” $ .
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance 2823
Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
Others
Language Name Code
65
2F90201A (E)p64-69
65
4/4/05, 9:03 PM
Others
POWER
TV
0–9
100
DISPLAY
INPUT SELECT
PROGRAM
VOL +/–
ENTER
CH M/?
Multi brand remote control
The remote control can be compatible with various brands of TV/
Cable box/DSS® satellite receiver by setting their control codes. The
TOSHIBA code has initially been set to control TOSHIBA TVs.
Setting TV control codes
Press TV to set the remote control operating
your TV.
While holding down PROGRAM enter the two
digits of your TV's brand code (listed below)
using Number buttons (0–9), then release
PROGRAM.
Point the remote control at your TV and use each
button listed below to make sure that your TV is
operated correctly.
POWER
CH M/?
VOL +/–
INPUT SELECT
Number buttons
(0–9)
100
DISPLAY
ENTER
To turn the TV on or off.
To select TV channels in the upper
or lower direction.
To adjust the sound level.
To select an external source such
as a VCR.
To select TV channels. When selecting channels 1 to 9, first enter 0 and
then desired number.
To substitute for 100 channel key.
To turn on or off TV’s screen display.
To use for the TV’s ENTER key.
Important
Some TV’s may not respond to all the operations left, or
may not be operated at all with this remote control. In
this case, operate your TV with its own remote control.
Table of TV brand codes
Brand name
of your TV
Toshiba
Bell & Howell
Carver
Celebrity
Citizen
Curtis Mathes
Dumont
Electro band
Emerson
Fisher
GE
Gibralter
Goldstar
Hallmark
Hitachi
Infinity
JBL
JCB
JVC
LXI
Magnavox
Marantz
Megatron
Memorex
MGA
Midland
Mitsubishi
Motorola
MTC
NAD
Nikko
Optimus
Optonica
Panasonic
Brand Code
01
09
10
03
12
09, 12
14
03
09,11
09
02, 07, 11
14
11
11
06
10
10
03
05
01, 02, 09, 10, 11
10
10
06, 11
04, 09, 11
04, 11
02,07, 14
04, 11
08
12
01, 11
11
09
08
07, 10, 15
Notes:
• For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV.
• If you replace the remote control’s batteries, set the brand code
again.
66
2F90201A (E)p64-69
66
4/4/05, 9:04 PM
Brand name
of your TV
Penney
Philco
Philips
Pioneer
Princeclub
Prism
Proscan
Proton
Pulser
Quasar
Radio Shack
RCA
Realistic
Runco(NEC)
Samsung
Sanyo
Scotch
Scott
Sears
Sharp
Sony
Soundesign
Supreme
Sylvania
Tandy
Technics
Techwood
Teknika
TMK
Victor
Vidikron
Vidtech
Wards
Zenith
Brand Code
01, 02, 07, 11, 12
10
10
16
12
07
02
11
14
07, 15
13
02
09, 11, 13
14
11, 12
09
11
11
01, 02, 09, 10, 11
08, 13
03
11
03
10
08
07, 15
07
04,10,12
11
05
10
11
10, 11,13
14
Setting Cable box/DSS® satellite
receiver control codes
Press CABLE BOX to set the remote control
operating your Cable box/DSS® satellite receiver.
Table of Cable box brand codes
Brand name of
your cable box
Toshiba
Anvision
Archer
While holding down PROGRAM enter the two
digits of your Cable box/DSS® satellite receiver
brand code (listed below) using Number buttons
(0–9), then release PROGRAM.
Cablestar
Cableview
Citizen
Curtis
Diamond
Point the remote control at your Cable box/DSS®
satellite receiver and use each button listed below to
make sure that your Cable box/DSS® satellite receiver
is operated correctly.
To turn the Cable box/DSS® satellite receiver on or off.
CH M/?
To select cable/satellite channels in
the upper or lower direction. (Not
applicable to some brands of cable
bos/satellite receiver.)
Number buttons (0–9) To select desired channels to record.
ENTER
To use for the Cable box’s ENTER key.
POWER
Eagle
Eastern
GC Brand
Gemini
General
Instrument
Hamlin
(Some cable boxes require you to use 100 button as the
enter button.)
Notes:
• For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your Cable
box/DSS® satellite receiver.
• If you replace the remote control’s batteries, set the brand code
again.
Macom
Magnavox
Movietime
NSC
OAK
OAK Sigma
Panasonic
36
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
1, 20, 21,
29, 42, 44,
63, 88, 91
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
30, 42, 44,
52, 63, 88
30, 42, 44,
52, 63, 88
8, 9, 56, 61
1, 20, 21,
29, 42, 44,
63, 88, 91
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
26, 28
30, 42, 44,
52, 63, 88
4, 30, 85
1, 2, 3,
4, 31, 34,
55, 83, 85,
91
14, 15, 28,
41
31, 79, 80
1, 2, 3,
4, 31, 34,
55, 85, 91
31, 79, 80
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
29, 32, 38,
39, 42, 44,
88
29, 32, 38,
39, 42, 44,
88
10, 11, 12,
13, 46
10, 11, 12,
13, 46
6, 8, 16, 17
Brand name of
your cable box
Philips
Brand Code
4, 13, 20,
21, 22, 23,
24, 25, 26,
58, 62, 84
Pioneer
5, 6, 78
Pulsar
30, 42, 44,
52, 63, 88
Randtek
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
RCA
6, 8, 16, 17
Realistic
44, 88
Regal
14, 23, 41,
84
Regency
26, 28
Rembrandt
29, 32, 38,
39, 42, 44,
88
Samsung
4, 6, 32,
42, 78
Scientific Atlanta 8, 9, 56, 61
Sheritech
27
SL Mark
4, 6, 32,
42, 78
Sprucher
6, 8, 16, 17
Stargate
4, 6, 30, 32,
42, 44, 52,
63, 78, 88
Sylvania
19
Teknika
74
Telecaption
77
Teleview
4, 6, 32,
42, 78
Texscan
18, 19
Tocom
1, 33, 34,
42, 48, 49,
73, 91
Unica
1, 20, 21,
29, 42, 44,
63, 88, 91
Universal
29, 42, 43,
44, 52, 63,
82, 88
Videoway
7, 23, 45,
50, 84
Viewstar
13, 20, 21,
22, 23, 24,
25, 26, 58,
62, 84
Warner Amex 6
Zenith
7, 23, 45,
50, 84
Others
Important
Some Cable box/DSS® satellite receiver may not respond
to all the operations left, or may not be operated at all
with this remote control. In this case, operate them with
its own remote control.
Hitachi
Jerrold
Brand Code
Table of DSS® satellite receiver brand codes
Brand name
Toshiba
RCA
Sony
Magnavox
Brand code
99
98
97
95, 96
Brand name
Draker
Primestar
Hitachi
Panasonic
Brand code
94
93
92, 89
90
67
2F90201A (E)p64-69
67
4/4/05, 9:04 PM
Others
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions.
Symptoms
Solutions
Page
DVD/VCR
DVD/VCR does not operate.
No picture.
No sound.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not set to the video
channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
equivalent).
• Channel is set to the external mode.
–
33,45
16~19
25
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
16~22
–
34,47
16~22
–
–
The remote control does not function.
• Make sure the DVD/VCR•TV•CABLE BOX mode is set properly.
• Aim the remote control at the remote sensor.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
No Cable TV reception.
• Check all Cable TV connections.
• Station or Cable TV system problems, try another station.
18~19
TV recording does not work.
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
32,37
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER REC has not been pressed ( is not lit).
27
40
40
• Tracking adjustment beyond range of automatic tracking circuit. Try Manual
tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
34
Noise bars on screen.
Display is not shown in your language.
• Select proper language in the menu options.
60
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
45
10
15
VCR
34
–
DVD
Stopping playback, slow-motion play, repeat
play, or memory play, etc. cannot be
• Some discs may not do some of the functions.
performed.
–
No picture, or the screen is blurred or divided • The PROGRESSIVE scan is “On” although the unit is connected to a TV via the
VIDEO OUT or the S-VIDEO OUT jack.
into two parts.
63
No 4:3 (16:9) picture.
• The setup does not match your TV.
60
No on-screen display.
• Select Display “On”.
No surround sound.
• The setup does not match your stereo system.
The unit or remote operation key is not
functioning.
Playback does not start when the title is
selected.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
• Check the Parental setup.
62,64
Audio soundtrack and/or subtitle language
is not changed when you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
53,54
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
54
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
52
• The function is prohibited with the unit or the disc.
47
appears on the screen.
60
68
2F90201A (E)p64-69
68
4/4/05, 9:04 PM
23,24
–
Specifications
General
Power supply
Power consumption
Weight
Dimensions
Tuner
Antenna input/output
RF channel output
Color system
Video head
Audio track
Hi-Fi frequency response
Hi-Fi dynamic range
FF/REW time at 25˚C (77˚F)
Applicable disc
Frequency range
S/N ratio
Harmonic distortion
Wow and flutter
Operating conditions
AC 120 V 60 Hz
Operation: 20 W, Stand by: 2 W
7.7 lbs (3.5 kg)
Width: 16-15/16 inches (430 mm)
Height: 3-1/2 inches (89.5 mm)
Depth: 9-1/16 inches (230 mm)
181 channel freq. synthesized
VHF
2-13
UHF
14-69
Cable TV 113 Channels
UHF/VHF 75 1 coaxial
Channel 3 or 4, Switchable
NTSC
4 Rotary heads
Hi-Fi sound - 2 Tracks / MONO sound - 1 Track
20 Hz to 20,000 Hz
More than 90dB
Approx. 1 minute and 48 seconds (with T-120 Cassette Tape)
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz
90dB (DVD)
0.02% (DVD)
Less than 0.01% Wrms
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal
Input/Output
DVD/VCR
1.0 V (p-p), 75 1, negative sync., pin jack x 2
1.0 V (p-p), 75 1, negative sync., pin jack x 1
–8 dBm, 50 k1, negative sync., pin jack (L/R) x 2
–8 dBm, 1 k1, negative sync., pin jack (L/R) x 1
Video input
Video output
Audio input
Audio output
DVD
S-video output
Component video output
Others
Audio output (DIGITAL COAXIAL)
Audio output (DIGITAL OPTICAL)
Audio output (ANALOG)
(Y) 1.0 V (p-p), 75 1, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 1
(Y) 1.0 V (p-p), 75 1, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 1, pin jack x 2
0.5 V (p-p), 75 1, pin jack x 1
Optical connector x 1
–12 dBm, 1 k1, pin jacks (L, R) x 1
Supplied accessories
Audio/video cable ................................................. 1
Remote control (SE-R0172) ................................. 1
Batteries (AAA) ..................................................... 2
75 1 coaxial cable ................................................ 1
HDMI cable ........................................................... 1
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
69
2F90201A (E)p64-69
69
4/4/05, 9:04 PM
Others
Limited warranty
Limited United States Warranty
DVD/VCR Combinations - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DVD/VCR COMBINATION AS A GIFT FROM THE
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty
TACP warrants this DVD/VCR Combination and its
parts against defects in materials or workmanship for
period of ninety (90) days after the date of original retail
purchase. DURING THE FIRST NINETY (90) DAYS
AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE, TACP WILL EXCHANGE A DEFECTIVE
DVD/VCR COMBINATION WITH A NEW OR
REFURBISHED DVD/VCR COMBINATION WITHOUT
CHARGE TO YOU. YOU MUST CONTACT TACP'S
CONSUMER SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW TO PROCESS YOUR IN WARRANTY EXCHANGE REQUEST. THE CONSUMER IS
RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE DVD/
VCR COMBINATION TO THE EXCHANGE CENTER.
DURING THE PERIOD THAT COMMENCES ON THE
DATE THAT IS NINETY ONE (91) DAYS AFTER THE
DATE OF ORIGINAL RETAIL PURCHASE AND
BEYOND, TACP WILL EXCHANGE A DEFECTIVE
DVD/VCR COMBINATION WITH A NEW OR
REFURBISHED DVD/VCR COMBINATION FOR A
NOMINAL FEE. YOU MUST CONTACT TACP'S
CONSUMER SOLUTIONS CENTER FOR
INSTRUCTIONS ON HOW TO PROCESS YOUR
EXCHANGE REQUEST. THE CONSUMER IS
RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE DVD/
VCR COMBINATION TO THE EXCHANGE CENTER.
* Rental Units
The warranty for rental units begins with the first rental
or thirty (30) days after the date of shipment to the
rental firm, whichever comes first.
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this DVD/VCR Combination. Complete and mail
the enclosed product registration card or register
your product on-line at www.tacp.toshiba.com/
service as soon as possible. By registering your
DVD/VCR Combination you will enable TACP to
bring you new products specifically designed to meet
your needs and help us to contact you in the unlikely
event that a safety notification is required under the
Consumer Product Safety Act. Failure to complete
and return the product registration card does not
diminish your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO
THE FOLLOWING CONDITIONS:
(1) You must retain your bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this product must be
made by an Authorized TACP Service Station.
(3) The warranties from TACP are effective only if
the product is purchased and operated in the
Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by
inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend
to any DVD/VCR Combination or parts that have
been lost or discarded by you or to damage to the
* Commercial Units
DVD/VCR Combination or parts caused by fires,
DVD/VDR Combinations sold and used for commercial
misuse, accident, Acts of God (such as lightning
purposes have a limited ninety (90) day warranty for all
or fluctuations in electric power), improper
parts and labor.
installation, improper maintenance, or use in
violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this
product and connected equipment; or to units that
have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
70
2F90201A (E)p70-BACK
70
4/4/05, 9:04 PM
How to Obtain Warranty Services
If, after following all of the operating instructions in this
manual and checking the section “Troubleshooting,”
you fund that service is needed:
(1) For instructions on how to obtain warranty service
for exchange program DVD/VCR Combinations,
contact TACP's Call Center toll free at 1-866-5837353.
(2) You must include the original bill of sale (or a copy
of the original bill of sale) or other proof of purchase along with the entire DVD/VCR Combination
when sending the DVD/VCR Combination to the
Authorized TACP Service Station specified by
TACP's Call Center. You must pay for all
transportation and insurance charges for the DVD/
VCR Combination to and from the Authorized
TACP Service Station.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO
STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, WHEN AN
ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE PROVISIONS
MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
For additional information, visit TACP's website:
www.tacp.toshiba.com
Others
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY LIMITED TO THE DURATION OF THE
LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED
BY THE LAW OF ANY STATE OF THE U.S.A. AS
HEREBY LIMITED, THE FOREGOING WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TACP WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF
ANY PARTS. IN NO EVENT SHALL TACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
MODIFICATION OR ERASURE OF RECORDED
DATA CAUSED BY USE, MISUSE OR INABILITY TO
USE THIS PRODUCT).
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to enforce
any obligation of TACP arising under the warranty or
under any statute, or law of the United States or any
state thereof, is hereby limited to ninety (90) days from
the date you discover or should have discovered, the
defect. This limitation does not apply to implied
warranties arising under state law.
71
2F90201A (E)p70-BACK
71
4/4/05, 9:04 PM
ColorStream and ColorStream Pro are registered trademarks of Toshiba America Consumer Products, L.L.C.
Printed in Thailand
J2F90201A SH 05/04 U
2F90201A (E)p70-BACK
72
4/4/05, 9:04 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:04:19 16:23:30+09:00
Create Date                     : 2005:04:19 16:23:19+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 42
Mod Date                        : 2005:04:19 16:23:30+09:00
Creation Date                   : 2005:04:19 16:23:19+09:00
Metadata Date                   : 2005:04:19 16:23:30+09:00

EXIF Metadata provided by EXIF.tools