ORION ELECTRIC M2G1A VCR/DVD TV Interface Device User Manual Part 1

ORION ELECTRIC CO., LTD. VCR/DVD TV Interface Device Part 1

Contents

User Manual Part 1

Hi-Fi VCR & DVD VIDEO RECORDERD-VR4SUOWNER’S MANUAL22333485262IntroductionVarious settingsDisc playbackTape playbackRecordingEditing the discDIGITAL VIDEO©2005 Toshiba Corporation7780DubbingAdditional informationThis device does not tape-record copy protected DVD Video Discs. 2G10101A Cover 2/10/05, 9:19 AM1DRAFT
Introduction2Introduction• CAUTION.............................................................4• IMPORTANT SAFEGUARDS.............................. 5• Features ..............................................................8• Disc .....................................................................9Handling discs ...................................................9Discs which can be played back ........................ 9Discs on which video can be recorded ............ 10Recording format .............................................10Disc playback in other players ......................... 11• Parts and functions .........................................12Front ................................................................12Rear .................................................................12Display window ................................................ 13Remote control ................................................14Power Source ..................................................15•Antenna connections ...................................... 16• Cable TV connections ...................................... 18• Connections with the TV or audio component ........................................................ 20•Auto clock setting ............................................22• Setting the video channel ...............................22Various settings•SETUP MENU ................................................... 23Using the SETUP MENU ................................. 23•Setting the language........................................24OSD LANGUAGE ............................................ 24DVD MENU...................................................... 24AUDIO .............................................................24SUBTITLE........................................................24•Setting the parental control ............................25Selecting parental control ................................ 25Temporarily cancelling parental control ...........25•Setting the clock ..............................................26CLOCK (manually)........................................... 26AUTO CLOCK .................................................26STANDARD TIME (Time zone) ........................ 26DAYLIGHT SAVING TIME ............................... 26•Setting the disc ................................................27REFORMAT ..................................................... 27NEW DISC FORMAT .......................................27FINALIZE .........................................................27PROTECT DISC ..............................................28UNDO FINALIZE .............................................28•Other (SYSTEM SETUP) ..................................28DIMMER (Brightness of the display window)...28DISPLAY (Turning the screen display“ON” or “OFF”) ................................................. 28Contents •Setting the screen ............................................ 29TV SCREEN .................................................... 29STILL MODE ................................................... 29NO NOISE BACKGROUND ............................ 29EXTERNAL VIDEO INPUT ..............................29•Setting the image quality ................................30BRIGHTNESS .................................................30•Setting the audio .............................................. 30DRC .................................................................30VIRTUAL SURROUND (Spatializer N-2-2TM) ... 30EXTERNAL AUDIO INPUT .............................. 30SAP (Second Audio Program) ......................... 31•Setting the recording ....................................... 31INITIAL REC TO ..............................................31INITIAL REC MODE ........................................ 31AUTO CHAPTER............................................. 31INDEX PICTURE ............................................. 31•Setting the channel .......................................... 32TV/CABLE SELECT ........................................ 32AUTO CH MEMORY ....................................... 32ADD/DELETE (channels) ................................ 32•Setting other items .......................................... 32JPEG INTERVAL .............................................32Disc playback• Playback procedure .........................................33• Playback by selecting a title ........................... 34• Checking media information...........................35• Special playback ..............................................36Fast forward playback ...................................... 36Review playback .............................................. 36Still playback ....................................................36Frame advance ................................................ 36Slow motion playback ......................................36Locating a chapter or track ..............................36• Instant skip .......................................................37• Locating a specific scene ............................... 37• Repeat playback...............................................38One touch repeat ............................................. 38A-B repeat playback ........................................ 38Title, Chapter repeat playback ......................... 38• Title selection ...................................................39• DVD menu ......................................................... 39• Changing angles ..............................................40• Zooming ............................................................ 40• Karaoke playback ............................................40• Changing soundtrack language .....................41• Subtitles ............................................................ 41Turning the subtitles On and Off ......................41• Various operations on CD ............................... 42• MP3/WMA/JPEG playback...............................44• Progressive scan .............................................47 2G10101A P02-P11 2/10/05, 9:19 AM2
Introduction3Media markEach applicable media are indicated using the symbol shown below.•Changing a disc name ..................................... 74Changing a disc name ..................................... 74Using the keyboard screen .............................. 75Dubbing•Dubbing a tape onto a disc .............................77•Dubbing a disc onto a tape .............................78•Dubbing using other equipment.....................79Additional information•Glossary............................................................80•Language code list .......................................... 82•Problems and troubleshooting ....................... 83•Video head cleaning ........................................84•Error/Warning message list ............................ 85•Specifications...................................................86•Limited warranty ..............................................87Tape playback•Loading and unloading a cassette tape ........ 48•Cassette tape playback ...................................49•Special playback .............................................. 50Picture search .................................................. 50Still picture ....................................................... 50Slow motion ..................................................... 50Frame by frame picture....................................50Adjusting tracking condition ............................. 50Repeat playback ..............................................50Commercial skip .............................................. 50To display VCR operation status......................50•ZERO RETURN function .................................. 51•Video index search system ............................. 51Recording•Read this before recording on disc ............... 52Types of disc ....................................................52Recording modes.............................................52Disc remaining time ......................................... 53Images that cannot be recorded ...................... 53•Recording a TV program .................................54•One-touch Timer Recording (OTR) ................ 56•Timer recording................................................57•Chase playback ................................................ 60•Stereo recording and playback ...................... 61Editing the disc•Editing the disc ................................................62•Editing a playlist .............................................. 63Creating a playlist ............................................63Changing a title name ...................................... 64Erasing a scene (Edit title) ............................... 65Combining the title ...........................................67Erasing a playlist..............................................68•Editing an original title ....................................69Adding a chapter mark.....................................69Combining chapters ......................................... 70Changing an original title name .......................71Erasing a scene (Edit title) ............................... 72Erasing an original title .................................... 73Contents: DVD-Video : DVD-R: DVD-RW in VR mode:Audio/Video CD and CD-R/CD-RW: DVD-RW in Video mode : Video tape: DVD-RAM 2G10101A P02-P11 2/10/05, 9:19 AM3
Introduction4WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-ANCE TO RAIN OR MOISTURE.CAUTION:THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER’S GUIDE CAREFULLY ANDRETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AU-THORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VIS-IBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STAREINTO BEAM.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTIONThe lightning flash with arrowhead sym-bol, within an equilateral triangle is in-tended to alert the user to the presenceof uninsulated dangerous voltage withinthe product’s enclosure that may be ofsufficient magnitude to constitute a riskof electric shock to persons.The exclamation point within an equilat-eral triangle is intended to alert the userto the presence of important operatingand maintenance (servicing) instructionsin the literature accompanying the appli-ance.CAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALI-FIED SERVICE PERSONNEL.WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with theFCC Rules could void the user’s authority to operate this equipment.CAUTIONCERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCESTANDARD, 21 CFR SUBCHAPTER J.Location of the required MarkingThe rating sheet and the safety caution are on the rear of the unit. 2G10101A P02-P11 2/10/05, 9:19 AM4
Introduction51. READ INSTRUCTIONSAll the safety and operating instructions should be read before the unit is operated.2. RETAIN INSTRUCTIONSThe safety and operating instructions should be retained for future reference.3. HEED WARNINGSAll warnings on the unit and in the operating instructions should be adhered to.4. FOLLOW INSTRUCTIONSAll operating and use instructions should be followed.5. CLEANINGUnplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.Use a damp cloth for cleaning the exterior cabinet only.6. ATTACHMENTSThe manufacturer of this unit does not make any recommendations for attachments, as they may causehazards.7. WATER AND MOISTUREDo not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wetbasement, or near a swimming pool.8. ACCESSORIESDo not place this unit on an unstable cart, stand, tripod, bracket, or table.The unit may fall, causing serious injury, and serious damage to the unit.8A. An appliance and cart combination should be moved with care. Quickstops, excessive force, and uneven surfaces may cause the applianceand cart combination to overturn.9. VENTILATIONSlots and openings in the cabinet back or bottom are provided for ventila-tion, to ensure reliable operation of the unit, and to protect it from over-heating.These openings must not be blocked or covered. The openings shouldnever be blocked by placing the unit on a bed, sofa, rug, or other similarsurface. This unit should never be placed near or over a radiator or heat source. This unit should not be placedin a built-in installation such as a bookcase or rack unless proper ventilation is provided and/or the manufacturer’sinstructions have been adhered to.10. POWER SOURCESThis unit should be operated only from the type of power source indicated on the rating plate. If you are notsure of the type of power supply to your home, consult your appliance dealer or local power company. For unitsintended to operate from battery power, or other sources, refer to the operating instructions.11. GROUNDING OR POLARIZATIONThis unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than theother). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert theplug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician toreplace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equippedwith a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact yourelectrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.12. POWER-CORD PROTECTIONPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placedupon or against them, paying particular attention to cords at plugs, convenience receptacles, and the pointwhere they exit from the appliance.13. LIGHTNINGTo protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unitdue to lightning and power line surges.S3125APORTABLE CART WARNING(symbol provided by RETAC)IMPORTANT SAFEGUARDS 2G10101A P02-P11 2/10/05, 9:19 AM5
Introduction6IMPORTANT SAFEGUARDS14. POWER LINESAn outside antenna system should not be located in the vicinity of overhead power lines or other electric lightor power circuits, or where it can fall into such power lines or circuits. When installing an outside antennasystem, extreme care should be taken to keep from touching such power lines or circuits, as contact with themmight be fatal.15. OVERLOADINGDo not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.16. OBJECT AND LIQUID ENTRYDo not push objects through any openings in this unit, as they may touch dangerous voltage points or shortout parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.17. OUTDOOR ANTENNA GROUNDINGIf an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is groundedto provide some protection against voltage surges and built-up static charges, Section 810 of the NationalElectrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and sup-porting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,location of antenna discharge unit, connection to grounding electrodes, and requirements for the groundingelectrode.18. SERVICINGDo not attempt to service this unit yourself as opening or removing covers may expose you to dangerousvoltage or other hazards. Refer all servicing to qualified service personnel.19. DAMAGE REQUIRING SERVICEUnplug this unit from the wall outlet and refer servicing to qualified service personnel under the followingconditions:a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fallen into the unit.c. If the unit has been exposed to rain or water.d. If the unit does not operate normally by following the operating instructions. Adjust only those controlsthat are covered by the operating instructions, as an improper adjustment of other controls may result indamage and will often require extensive work by a qualified technician to restore the unit to its normaloperation.e. If the unit has been dropped or the cabinet has been damaged.f. When the unit exhibits a distinct change in performance, this indicates a need for service.20. REPLACEMENT PARTSWhen replacement parts are required, be sure the service technician uses replacement parts specified by themanufacturer or those that have the same characteristics as the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.21. SAFETY CHECKUpon completion of any service or repairs to this unit, ask the service technician to perform safety checks todetermine that the unit is in proper operating condition.22. HEATThe product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts (including amplifiers) that produce heat.23. DISC TRAYKeep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.24. CONNECTINGWhen you connect the product to other equipment, turn off the power and unplug all of the equipment fromthe wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner’smanual of the other equipment carefully and follow the instructions when making any connections.25. LASER BEAMDo not look into the opening of the disc tray or ventilation opening of the product to see the source of the laserbeam. It may cause sight damage. 2G10101A P02-P11 2/10/05, 9:19 AM6
Introduction7CONDENSATIONMoisture will form in the operating section of the DVD/VCR if the unit is brought from cool surroundings into a warmroom or if the temperature of the room rises suddenly. When this happens, the DVD/VCR’s performance will beimpaired.To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or makesure that the room temperature rises gradually.Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air conditioner.In such cases, change the location of the DVD/VCR.26. DISCDo not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause seriouspersonal injury and product malfunction.27. NOTE TO CABLE TV SYSTEM INSTALLERThis reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC thatprovides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connectedto the grounding system of the building, as close to the point of cable entry as practical.IMPORTANT SAFEGUARDS*This product incorporates copyright protection technology that is protected by method claims of certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macrovision Corporation and is intendedfor home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.Reverse engineering or disassembly is prohibited.Consumers should note that not all high definition television sets are fully compatible with this product andmay cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it isrecommended that the user switch the connection to the “STANDARD DEFINITION” output. If there arequestions regarding our TV set compatibility with this model 525p DVD player, please contact our customerservice center.* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are registeredtrademarks of Dolby Laboratories.* “DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems, Inc.* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials mayinfringe the rights of copyright owners and be contrary to copyright laws.* Certain audio features of this product manufactured under a license from Desper Products, Inc. Spatializer®,N-2-2™ and the circle-in-square device are trademarks owned by Desper Products, Inc.*Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporationin the United States and/or other countries.EXAMPLE OF ANTENNA GROUNDING AS PER THENATIONAL ELECTRICAL CODEANTENNADISCHARGE UNIT(NEC SECTION 810-20)ANTENNA LEAD IN WIREGROUNDING CONDUCTORS(NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)GROUND CLAMPELECTRIC SERVICEEQUIPMENTNEC-NATIONAL ELECTRICAL CODES2898A 2G10101A P02-P11 2/10/05, 9:19 AM7
Introduction8FeaturesPlayback functionTitle menuVideo CD/SVCD and MP3/WMA/JPEG playbackVideo CD/SVCD/MP3/WMA files can be played back.Also, you can display JPEG files on the TV screen andenjoy them as a slide show.Progressive scanThis unit supports the progressive scanning system. Ifyour TV is equipped with component video input jackswhich support the progressive video input, you canenjoy high quality picture.Thumbnail image will not appear after finalizing andDVD-R•Not only can you playback and record video tapes, butyou can also playback DVD discs or make recordingsusing DVD-RAM, DVD-RW or DVD-R discs with this unit.In addition, you can enjoy editing the programs yourecord.A realistic, powerful, Movie Theater soundWhen connected to Dolby Digital and DTS compliantdevices, you can enjoy realistic, powerful surroundsound.Playback the scene you want to see immediatelyAs DVD’s do not require rewinding like video tapes, youcan get to the scene you wish to watch immediately. Avariety of search functions allow you to find the sceneyou wish to watch.As thumbnail images are displayed in the title menu,you can find the title you want to play back quickly.Chase PlaybackYou can begin playback from the beginning of a programcurrently being recorded. You will find this function ofgreat advantage on long programs, as you do not haveto wait for the end of recording to begin playback.Recording functionTimer recordingThe timer recording system allows you to select thedate, time and channel and record the desired pro-grams. Up to 12 timer programs within a month can bestored in this unit.One-touch Timer Recording (OTR)The One-touch Timer Recording feature provides asimple and convenient way to make a timed recording.Edit functionEditing recorded material without changingthe original titlesYou can create a playlist based on the original titles.The playlist won’t affect the original titles. If you erasethe playlist, the original titles remain. It is recommendedto create and edit the playlist to prevent important titlesfrom being erased accidentally.Chapter markYou can add (or delete) a chapter mark to (from) theoriginal title. This function is useful when searching forthe scene you wish to watch that you have marked withthe Chapter mark function.Erasing scenesYou can erase an unnecessary scene from the createdplaylist or the original titles.Combining titlesYou can combine several original titles or playlists to aseparate playlist.Dubbing functionDubbing a tape onto a disc or a disc onto atape•Dubbing cannot be carried out when attempting tocopy a “copy guarded” video tape or disc.With just this one unit, you can dub however you like,from video tape to disc, or from disc to video tape. 2G10101A P02-P11 2/10/05, 9:19 AM8
Introduction9DiscHandling discsRemoving the Disc from its caseBe sure to hold the disc by its edges.Do not touch the surface of the disc.Take the disc carefully from its case.• Do not scratch the disc.• Do not get dirt on the surface of the disc.• Do not stick labels or adhesive tapes on the disc.• Do not drop or bend the disc.Storing discs• Store the disc in the case to avoid any risk ofscratches, dirt or damage.• Do not leave the disc exposed to direct sunlight or inhot or humid places.Cleaning discsWipe the disc with a clean, dry cloth from the centeroutward toward the edges.• Do not wipe the disc in a circular motion around thecenter.• Do not use liquid or aerosol cleaners.DVD-RAM discs with cartridges arerecommended for recording.•Two types of DVD-RAM discs are available: ones withcartridges and ones without cartridges. You can useeither of them with this recorder, but the formerones are recommended.•In order to record highly detailed data, make sure thedisc is clean. DVD-RAM discs with cartridges areeasier to handle in this regard.•Do not open the cartridge shutter. Thedisc may notplay, or may not be recorded or editedonce it becomes dirty.•There are two types of DVD-RAM cartridges;removable (TYPE 2/4) and not removable (TYPE 1).It is recommended you do not remove the disc evenwhen you can.Refer to the instruction manual that comes with thedisc if it is absolutely necessary to remove the disc.•Some commercially available cartridge discs cannotbe recorded or edited once the inside discs areremoved.To protect recorded contentsSlide the write-protect tab to “PRO-TECT” with something small enough.The disc can play, but cannot be editedor erased. Refer to the instructions thatcome with the disc.Discs which can be played backIn this unit, use only discs that meet the standard, suchas those bearing the below logo marks on the disc labelsurface. If you use a non-standard disc, we cannot guar-antee playback. Even if such a disc can be played back,we cannot guarantee the image or sound quality.The DVD logo is a registered trademark.Region management informationThis unit is designed and manufactured to support theregion management information that is recorded on aDVD disc. If the region number written on the DVD discdoes not correspond to the region number of this unit,this unit cannot play that disc.• The region number of this unit is “1”.• The unit will play DVD-Video discs marked with la-bels containing “1” or “ALL”.Example:1Operating DVD-Video• Some operations of DVD-Video may be prohibitedby the manufacturer, or some operation methods orfunctions of the DVD-Video may be different from thedescription in this manual.• If you attempt an operation that is prohibited by ei-ther the disc or the unit, a “ ” mark will appear on theTV monitor. For operations prohibited by the disc, seethe information that came with the disc.• When the menu screen or the operation guide ap-pears during disc playback, follow the displayedinformation.Discs which cannot be played backThe discs listed below cannot be played back in gen-eral. Even if one of these can be played back, it maynot be played back correctly. If a disc is played back bymistake, extensively loud sounds may blow the speak-ers or may damage the hearing of those in hearingrange. Do not playback the discs listed below.CDG, Photo-CD, CD-ROM, CD-TEXT, CD-EXTRA,SACD, PD, CDV, DVD-ROM, DVD+R/RW, DVD au-dio, etc.The below DVD-Video may not be played back.• DVD-Video that do not have the region number “1” or“ALL”.• PAL or SECAM DVD-Video.• Prohibited or business-use DVD-Video.CD-R/CD-RWs cannot be played back for the fol-lowing reasons.• Compatibility of the disc and this unit.• Compatibility of the disc and the recorder used.• Unfinalized discs.Do not playback the following discs. Playback ofthese discs may cause a failure.• Discs on which paper, labels or stickers are affixed.• Discs that have sticky areas left by adhesive tape.• Special-shaped discs.Media type Logo markDVD-VideolDIGITAL VIDEO* This unit is designed to playback music Compact Discs (CD) thatconform to the CD standard. CDs that contain (copy-restriction) sig-nals to protect copyrights cannot be played back.DVD-RAM Ver.2.0 Ver.2.1Video CDSVCDDVD-RW Ver.1.0 Ver.1.1 Ver.1.2Ver.1.1CPRM supportDVD-R Ver.2.0(Ver.2.0/4x/8x)Audio CD*CD-R/CD-RWPROTECT 2G10101A P02-P11 2/10/05, 9:19 AM9
Introduction10DiscNOTES:• There are some players that cannot playback discsthat were recorded with this unit. We cannot guaran-tee the playback with other units.• This unit cannot record on DVD-RAM/RW/R discs thatare 8 cm in diameter.• This unit cannot record on CD-RW/R.Recording formatThis unit has two modes for formatting discs for record-ing: VR mode and Video mode.When a blank, new disc is loaded into this unit, theautomatic format function starts to format the disc. (Forthe disc format setting in this step, see page 27.)VR mode• This mode can be used for DVD-RAM/-RW.• In this mode, the discs can be recorded and editedrepeatedly.• The disc recorded in this mode can be played backwith other DVD-RW-compatible players.• When a Ver.1.1 CPRM or Ver. 1.2 disc is used, youcan record a “Copy Once” program (see page 53).Video mode• This mode can be used for DVD-R and DVD-RW(Ver.1.1/1.2).• When you finalize the disc after recording, the discrecorded with this unit can be played back with otherDVD players.• Recording, editing or playback of an unfinalized disccan be done only with this unit. However, there aresome limitation to editing operations.• In this mode, you cannot record a “Copy Once” pro-gram (see page 53).• When you record a TV program of a bilingual broad-cast, only one of the audio modes can be recorded.You have to select it.Format modes that can be used with each discThe usable format depends on the media type as shownin the below table.Media type Logo markDVD-RAM Ver.2.0 Ver.2.1DVD-RW Ver.1.0 Ver.1.1 Ver.1.2Ver.1.1CPRM supportDVD-R Ver.2.0 (Ver.2.0/4x/8x)DVD-RAM• Use only DVD-RAM discs that comply with DVD-RAM standard Version 2.0 or 2.1.The recorder cannot record on a disc formatted inany other standard. When using such a disc, initializeit by using the disc-format function of this recorder.• The recorder may not record, dub, or edit some DVD-RAM discs, because they are edited/recorded withanother manufacture’s equipment or PC, contain alarge number of titles, or have little remaining capac-ity. Also, a DVD-RAM disc may not be edited or re-corded if its title contains still pictures.• DVD-RAM discs formatted in UDF2.0 on a PC arenot compatible with this recorder. Before using thesediscs, initialize them on this recorder.• This recorder complies with current copyrightprotection technology and can copy a disc only whenthe disc permits copying once. When there is noindication on the disc, copying will not be allowed.Such an indication on a disc is required also for theLibrary Management database.DVD-RW• The disc can be erased and used again about 1,000times.• Only the VR mode can be used for Ver.1.0 discs.• With Ver.1.1/1.2 discs, you can record by selectingthe VR mode or Video mode.• When you record in the VR mode, you can repeat-edly record and erase. By erasing unnecessary titles,you effectively increase remaining time.• When you record in the Video mode, you can recorduntil the disc becomes full.• When you use the Video mode, you can newly recordon the disc by formatting the disc. However, if thedisc is formatted, all the recorded contents will beerased.DVD-R• You can record on the disc only in the Video mode.• You can record until the disc becomes full.• Finalizing the discs allows playback on other DVDplayers. However, the finalized discs can no longerbe recorded.• Discs can be recorded to repeatedly until they arefinalized.Discs on which video can be re-cordedTo record video with this unit, use the discs below:Media type FormatDVD-RW(Ver.1.0)DVD-RW(Ver.1.1 and 1.2)DVD-R(Ver.2.0/4x/8x)Available functionsVR modeVR modeVideo modeVideo modePlayback, recording andediting (Original/playlist)Playback, recording andediting (Original/playlist)Playback and recordingEditing (with limitation)Playback and recordingEditing (with limitation)DVD-RAM(Ver.2.0/2.1) VR mode Playback, recording andediting (Original/playlist) 2G10101A P02-P11 2/10/05, 9:19 AM10
Introduction11DiscCHAPTER 1TITLE1 TITLE2DVD DISCCHAPTER 2 CHAPTER 2 CHAPTER 3CHAPTER 1TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5Audio-CDDisc playback in other playersDVD-RW/R recorded in this unit can be finalized. Thedisc can be played back in other players that can play-back DVD-RW and DVD-R.For more information on finalization, see “FINALIZE” in“Setting the disc” (page 27).When recording in the VR modeEven if a DVD-RW disc recorded in the VR mode isfinalized, you can record or edit by cancelling the final-ization. (See “UNDO FINALIZE” on page 28.)When you playback the disc with another player, makesure that the DVD player supports DVD-RW and bearsthe following mark.When recording in the Video modeWhen a disc recorded in the Video mode is finalized, itcannot be recorded onto any more. Therefore, beforefinalization, be sure to perform all desired recording.After finalization, a title list that can be used by the DVDplayer is automatically created.NOTES:• The finalization process may require from a few min-utes up to 1 hour depending on the disc type and theamount of free space on the disc.• A DVD-RW Ver.1.1/1.2 recorded in the Video modecannot be recorded or edited after finalization, but ifyou format the disc by erasing all the content, youcan again record on this disc.• A finalized disc may not play because of the condi-tion of the DVD or the compatibility with the playerused for playback.• Some players may not playback the discs recordedwith this unit. We cannot guarantee the playback us-ing other players.Title/Chapter/TrackA DVD-Video has large partitions called “Titles”, andsmaller partitions within them called “Chapters”.A music CD has other partitions called “Tracks”.A num-ber is allotted to each partition and these numbers arecalled “title numbers”, “chapter numbers” or “track num-bers”.When recording in the VR modeOne-time recording is set to 1 title (1 chapter). How-ever, if you stop recording temporarily or erase scenesby editing, the chapter will automatically be partitioned.The interval between chapters can be specified. (Seepage 31.)When recording in the Video modeOne-time recording is set to 1 title. In recording, chap-ters are set automatically. The interval between chap-ters can be specified. (See page 31.)NOTES:• The title, chapter and track are numbered, but somediscs may not record the numbers.• Recording on DVD-R/RW in the Video mode is a newstandard approved at the 2000 DVD forum. Confor-mity to this standard varies with each DVD playermanufacturer. Some models of DVD player or DVD-ROM drive, therefore, will not playback recorded vid-eos. 2G10101A P02-P11 2/10/05, 9:19 AM11
Introduction12Parts and functionsRearFrontAC power cord DVD COAXIAL DIGITALAUDIO OUT jackDVD/VCR commonAUDIO (L/R)/VIDEO OUT jacksDVD AUDIO (L/R)OUT jacksDVD/VCR commonAUDIO (L/R)/VIDEOIN (LINE 1) jacksDVD S-VIDEOIN (LINE 1) jackDVD/VCR commonS-VIDEO OUT jackDVD COMPONENTOUT jacksDVD OPTICAL DIGITALAUDIO OUT jackRF IN jackRF OUT jackPOWER buttonEJECT buttonOPEN/CLOSE buttonPLAY buttonSTOP buttonFF (Fast Forward) buttonREW (Rewind) buttonREC/OTR buttonCHANNEL / buttonsDisc trayCassette Loading SlotDVD buttonDVD indicatorDUBBING buttonVCR buttonVCR indicatorDisplay windowVIDEO IN (INPUT 2) jackS-VIDEO IN jackAUDIO (L/R) IN jacks* This unit has a door on the front panel.Please open it to access the S-VIDEO jack and the AUDIO (L/R)/VIDEO IN (INPUT 2) jacks. 2G10101A P12-P21 2/10/05, 9:20 AM12
Introduction13No. Display DescriptionLights during video tape playback.1Parts and functionsNOTE:Some discs may not playback correctly, or chapter number, playback time, etc may not be displayed.Display windowVideo tape is temporarily stopped.Lights during video tape recording.Progressive scanning mode.Timer recording display.PP21 3424Appears when a CD is inserted.Appears when a CD-R is inserted.Appears when a DVD-Video is inserted.Appears when a DVD-R is inserted.Appears when a DVD-RW is inserted.Appears when a DVD-RW in VR mode is inserted. When the disc is set to video mode, VR does not appear.Video tape is in the unit.Clock display (Colon [ : ] flashes).Counter display in hour/minute/second for VCR/DVD, minute/second for CD.Cable TV channel display.TV channel display.Track number display for CD.Display for afternoon (out in the morning).The external input channel (L1 or L2) display.Error display.Lights during playback of DVD and CD. Flashes in auto resume.DVD or CD is temporarily stopped.Lights during DVD recording.CDCD-RDVDDVD-RDVD-RWVR10:0001H00M00SC 36CH2CHTRK 002PML1/L2Err34 DVD recording modes. XP, SP, LP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly.2 VCR recording modes. SP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly.SP/SLPXP/SP/LP/SLPAppears when a CD-RW is inserted.CD-RWAppears when a DVD-RAM is inserted.RAMAppears when the tuner built into this unit is not selected. When you press TV/VIDEO disappears.TV 2G10101A P12-P21 2/10/05, 9:20 AM13
Introduction14OPEN/CLOSEOpens or Closes the tray. 33EJECTEjects the cassette tapes 48PROGRESSIVE Activates the progressive scanning mode. 47TV/VIDEO Select to operate TV/VIDEO 22, 55ON/STANDBY Turns power on/off. 220-9 Direct channel selection of TV 54Setting input 37, 74Entering a password 25INSTANT REPLAY Repeats playback between the section played10 seconds before and present section. 38INSTANT SKIP Skips commercial breaks. 37, 50DISPLAY Displays VCR or DVD operation status. 35, 51DVDVCRCH / Channel selection for the connected TV or VCR 54DUBBING Copies VCR to DVD or DVD to VCR. 77DVD MENU Displays the menu of the DVD disc. 39INPUT SELECT Switches the connected TV to external inputs. 79TOP MENU/TITLE MENUSelects titles of a DVD disc. 34, 39, 42, 63SETUP Display the setup menu 23,57/Cursor buttons 23, 33, 37, 57TRK +/– Manual tracking in the playback mode for VCR 50 / Cursor buttons 33, 37ENTER Option selection in the menu 23, 33, 37, 57RETURN Close the menu window. 23, 45CANCEL Deletes the Timer recording program. 59Cancels input data in the setting mode. 25PAUSE/STILL Still picture/Recording pause on/off 36, 50PLAY Playback 33, 49STOP Stop 33, 49, 55SKIP / Skips chapters in the forward or reverse direction 36INDEX – / + Searches for the INDEX mark of a tape 51SEARCH /REWRewind/Review playback 36, 49, 50SEARCH /F.FWDFast Forward/Forward search playback 36, 49, 50REC MODE/SPEED Selects the recording mode. 54, 56REC/OTR Recording 54, 56, 79TIMER REC Sets the unit to start recording at a preset time. 59SLOW Slow motion playback 36, 50ANGLE Changes playback angle. 40COUNTER RESET Resets the counter to 00H 00M 00S . 51AUDIO Switches sound between mono and stereo. 61AUDIO SELECT Changes the language of the DVD. 41SUBTITLE Selects subtitles of the DVD disc. 41ATR Digital AUTO TRACKING 50CLOCK/COUNTER Changes the front panel display mode. 51ZOOM Zoom (for DVD/Video CD) 40ZERO RETURN Stops the tape when the counter reaches 00H 00M 00S . 51A-B REPEAT Repeats playback between A and B. 38PLAY MODE Selects the playback mode. 37REPEAT Repeats playback. 38, 50Remote control PageParts and functionsSwitches to operation between VCR and DVD. 33,49,77,78 2G10101A P12-P21 2/10/05, 9:20 AM14
Introduction15Inserting Batteries into the Remote Control:Parts and functions3Replace the compartment cover.2Install two “AAA” batteries, pay-ing attention to the polarity dia-gram in the battery compart-ment.1Open the battery compartmentcover in the direction of the ar-row.Battery precautionsThe precautions below should be followed when using batteries in this device:1.Use only the size and type of batteries specified.2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury frompossible battery leakage.5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow batterymanufacturer’s directions.)Remote control basics•Press ON/STANDBY to turn the DVD/VCR on or off.•Press CH or CH to move through the channels one channel at a time.•The /// are also used to navigate on-screen menu system.•You can directly access specific channels using numeric keys.• Each press of DVD or VCR, switches the screen between the DVD screen (DVD mode) and the VCR screen(VCR mode).Operation• Aim the remote control at the remote sensor and press control buttons tooperate.• Operate the remote control within 30° angle on either side of the remote sen-sor, up to a distance of approximately 5 meters (15 feet).Polarized AC Cord Plug(One blade is wider than the other.)AC OutletWider Holeand BladePower SourceTO USE AC POWER SOURCEUse the AC polarized line cord provided for operation on AC. Insert the ACcord plug into a standard 120V 60Hz polarized AC outlet.NOTES:• Never connect the AC line cord plug to other than the specified voltage(120V 60Hz). Use the attached power cord only.• If the polarized AC cord does not fit into a non-polarized AC outlet, do notattempt to file or cut the blade. It is the user’s responsibility to have anelectrician replace the obsolete outlet.• If you cause a static discharge when touching the unit and the unit fails tofunction, simply unplug the unit from the AC outlet and plug it back in. Theunit should return to normal operation.30¡ 30¡Approx.5 meters (15 feet) 2G10101A P12-P21 2/10/05, 9:20 AM15
Introduction16NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect theantenna to the DVD/VCR properly.•For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The useof an outdoor type antenna is required.•If you are not sure about the connection, please refer to qualified service personnel.If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip aheadto page 18 for the proper connections.ANTENNA TO DVD/VCR CONNECTIONThe DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TVand connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connect-ing an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connectiondiagram.If both UHF and VHF antennas have 300 ohm twin lead (flat) wires,use a combiner having two 300 ohm inputs and one 75 ohm output.NOTE:Antenna connectionsCombination UHF/VHF antenna with 75 ohm coaxial cableCombination UHF/VHF antenna with 300 ohm twin lead (flat) wireSeparate UHF and VHF antennas123DVD/VCR300 ohm twin lead (flat) wire75(suMatching transformer300 ohm input75 ohm output(not supplied)DVD/VCR300 ohm twin lead (flat) wire75 ohm coaxial cableUHFVHF7(sCombiner75/300 ohm input75 ohm output(not supplied)DVD/VCR75 ohm coaxial cable75 2G10101A P12-P21 2/10/05, 9:20 AM16
Introduction17NOTE: If a UHF or VHF antenna is used,set the TV/CABLE menu optionto the “TV” mode.TV with single 75 ohm UHF/VHF antennainputNOTE: If a UHF or VHF antenna is used,set the TV/CABLE menu optionto the “TV” mode.TV with 300 ohm UHF and 75 ohm VHFantenna inputsNOTE: If a UHF or VHF antenna is used,set the TV/CABLE menu option tothe “TV” mode.TV with 300 ohm UHF and 300 ohm VHFantenna inputs DVD/VCR TO TV CONNECTIONAfter you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and followthe connection diagram.This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate UHF and VHF antennainputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for UHF and VHF reception.Antenna connectionsUHFVHFTV75 ohm coaxial cable(supplied)Splitter75 ohm input75/300 ohm outputs(not supplied)UHFVHFTV75 ohm coaxial cable(supplied)Splitter75 ohm input300 ohm outputs(not supplied)UHF/VHF INTV75 ohm coaxial cable (supplied) 2G10101A P12-P21 2/10/05, 9:20 AM17
Introduction18UHF/VHFIN (ANT)TVDVD/VCRIncoming cable Converter/descramblerUHF/VHFIN (ANT)TVDVD/VCRIncomingcableConverter/descramblerMany cable companies offer services permitting reception of extra channels including pay or subscription chan-nels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cablecompany supplied converter box, except for those channels which are intentionally scrambled. If you subscribe toa special channel which is scrambled, you must have a descrambler box for proper reception.Cable TV connectionsNOTE: Whenever a converter/descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to theoutput of the converter/descrambler box, usually channel 3 or 4.ALLOWS: • Recording of nonscrambled channels.•Use of the programmable timer.•Recording of one channel while watching another.ALLOWS: • Recording of channels through the converter box(scrambled and unscrambled).•Using the programmable timer to record only thechannel selected at the converter box.PREVENTS: • Recording one channel while watching another.•Using the DVD/VCR tuner to select channels.123ALLOWS: • Recording of nonscrambled channels.•Use of the programmable timer.•Recording an unscrambled channel while watch-ing any channel selected at the converter box.PREVENTS: Recording scrambled channels.NOTE:If you are playing a tape or using thetuner built into the DVD/VCR, the con-verter must be set to the video channeloutput of the DVD/VCR (either 3 or 4).NOTE:To record from converter/descrambler,DVD/VCR tuner must be tuned to theconverter output channel, usually chan-nel 3 or 4.UHF/VHFIN (ANT)TVDVD/VCRIncoming cable 2G10101A P12-P21 2/10/05, 9:20 AM18
Introduction19UHF/VHFIN (ANT)TVDVD/VCRIncomingcableSplitterConverter/descramblerA/B switchUHF/VHFIN (ANT)TVDVD/VCRIncomingcableSplitterConverter/descramblerA/B switchIMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode.This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambledprograms, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult yourlocal cable company for more information concerning connection to their descrambler equipment. There are many waysto connect your DVD/VCR to a cable system. Below are six common methods of connection.456ALLOWS: • Recording of one channel while watching another.•Using the programmable timer to record only the channel selected at the converter box.•Recording of all channels through the converter box.PREVENTS: • Watching scrambled channels while recording another channel.•Using the DVD/VCR tuner to select channels.ALLOWS: •Recording of nonscrambled channels.•Recording of one channel while watching another.•Watching premium channels through the converter while recording nonscrambled channels.•Using the programmable timer.PREVENTS: Recording scrambled channels.ALLOWS: • Recording of all channels through the converter box.•Recording a scrambled or unscrambled channel while watching another (scrambled orunscrambled) channel.•Using the programmable timer to record only the channel selected at the converter box.PREVENTS: Using the DVD/VCR tuner to select channels.Cable TV connectionsUHF/VHFIN (ANT)TVDVD/VCRIncomingcableSplitterConverter/descramblerA/B switchConverter/descrambler 2G10101A P12-P21 2/10/05, 9:20 AM19
Introduction20Connections with the TV or audio componentThe exact arrangement you use to interconnect various video and audio components to the DVD/VCR is depen-dent on the model and features of each component. Check the Owner’s Manual provided with each component forthe location of video and audio inputs and outputs.Connect to a TV with Audio/Video outputYou can enjoy playback by connecting the unit to a TV.Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable.Connect to a TV with S-Video outputIf your TV has an S-Video input, you can get higher quality by connecting it with the S-Video output of the unit usingthe S-Video cable instead of connecting the video input of the TV to the video output jack of the unit.Connect to a TV with Component video output (for DVD/CD playback)You can enjoy the highest quality picture by connecting the unit’s component video out jacks to the componentvideo input jacks of your TV, with component video cables (not supplied).NOTES:• When connecting to a TV using the video or S-Video jack, make sure that the progressive indicator on thedisplay window is not lit. If it is lit, the video and S-Video outputs do not feed the correct signals and you cannotsee any picture. To turn off the progressive indicator, make the progressive scanning mode inactive (see page47).• If the component video input jacks on a TV are the BNC type, use an adapter to convert the RCA jacks from thecomponent video cables to BNC (not supplied).To Audio (R) inputAudio/video cable (supplied)Audio (R) outputTo Audio (L) inputAudio (L) outputTo Video inputVideo output TVDVD/VCRTo Audio (R) inputAudio cable (not supplied)DVD audio (R) outputDVD audio (L) outputS-Video outputTo S-VideoinputS-Video cable (not supplied)To Audio (L) inputTVDVD/VCRTo Audio (R) inputAudio cable (not supplied)DVD audio (R) outputTo Audio (L) inputDVD audio (L) outputTVDVD/VCRComponent video cable (not supplied)Componentvideo outputTo Componentvideo input 2G10101A P12-P21 2/10/05, 9:20 AM20
Introduction21Connections with the TV or audio componentConnect to a stereo amplifier with audio outputYou can enjoy high quality audio by connecting the audio output to your amplifier.Connect the audio output jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.Connect to an AV Amplifier with built-in digital surroundIf you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systemssuch as Dolby Digital and DTS by using the optical or coaxial digital output.Use this connection to connect an:• AV amplifier with built-in *Dolby Digital decoder• AV amplifier with built-in *DTS decoderConnecting the optical digital cableYou may connect to an AV Amplifier with an optical digital cable (not supplied) instead of a coaxial digitalcable.When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.When not using the optical digital cable, attach the dust protection cap to protect against dust.NOTES:•The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R and COMPONENT) are useful only for DVDsection.TheVHS signal is output only from the S-Video output jack, composite jacks (DVD/VCR OUTPUT)and UHF/VHF OUT.• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AVamplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing thespeakers to be damaged.• Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital inputconnector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs maycause such a high level of noise that it may be harmful to your ears and damage your speakers.• DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder isnecessary.• When playing DTS-encoded CDs, only noise will be heard from the speakers or analog stereo outputs.• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.NOTE:You may connect to a TV with a componentvideo cable (not supplied) or S-Video cable(not supplied) instead of a video cable (notsupplied).To Audio (R) inputAudio cable (not supplied)Audio (R) outputTo Audio (L) inputAudio (L) output Stereo AmplifierDVD/VCRDVD/VCR AV Amplifier with built-in variousdecoder as aboveVideo outputTo Video intputCoaxial digital audio outputCoaxial digitalcable (not supplied)Video cable (not supplied)TV 2G10101A P12-P21 2/10/05, 9:20 AM21
22IntroductionAuto clock setting / Setting the video channelNOTES:•When shipped from factory, thevideo channel is set to CH 3.•If the unit does not operate prop-erly, or there is no key operationfrom the unit and/or the remotecontrol: Static electricity, etc., mayaffect the operation. DisconnecttheAC power cord once, then con-nect it again.Auto clock settingPreparation:You must connect the antenna or cable before connecting the AC cordto the power source.WAIT 30 MINUTES with the power turned off, after the antenna orcable is connected, for the auto clock feature to activate.After the clock is set automatically, you may have to set the time zoneand daylight saving time. (See page 26.)Press ON/STANDBY to turn on the DVD/VCR after the auto clock op-eration completed.• When shipped from factory, the “AUTO CLOCK” option is set to “ON”position.• If you turn the DVD/VCR on during auto clock setting, the clock is notset.• After a power failure or disconnection of the power plug, the clock willbe lost. In this case, wait 30 minutes before turning the DVD/VCR on.• With cable box connection, if the auto clock setting is unsuccessful,select the PBS channel carrying the XDS information, then turn theDVD/VCR off. After 30 minutes, turn the DVD/VCR on.• If the clock is not set automatically, set the clock manually. (Seepage 26.)Setting the video channelTo view playback of a recorded tape or DVD disc, or to watch aprogram selected by the VCR’s channel selector, the TV must beset to channel 3 or 4 (video channel).When a TV is connected with the 75 ohm coaxial cable only:1Press and hold 3 or 4on the remote control for 3 seconds in thestandby mode to select CH 3 or 4. The selected channel numberwill flash on the display for about 4 seconds.2Turn ON the TV and set to CH 3 or 4 to correspond with the chan-nel selected in step 1.3Press ON/STANDBY to turn on the DVD/VCR.4Press TV/VIDEO to select the VCR position.The TV indicator will disappear in the display.5Select any channel to receive a TV station in your area.The channel number will appear on the screen for about 4 sec-onds.For a push-button TV tunerIf CH 3 or 4 corresponding to the video channel cannot be tuned onyour TV, proceed as follows: set the VCR 3/4 channel selector and theTV to CH 3 or 4, playback a prerecorded tape and tune the TV to re-ceive a sharp color picture from the video cassette recorder. Refer toyour TV owner’s manual for details. 2G10101A P22-P32 2/10/05, 9:20 AM22
23Various settingsSETUP MENUThe SETUP MENU consists of several menus whereyou can make various settings concerning lan-guage, audio functions, and images. In addition, thismenu includes a clock, channel and other thingsthat require setting just after purchase.For details of each menu, see the correspondingsection in this chapter.Using the SETUP MENUThe following example shows the basic setting proce-dure of the SETUP MENU. The remote control keysthat operate the SETUP MENU are displayed at thebottom of the screen.1Press SETUP while the DVD or video tape isstopped.The SETUP MENU screen will appear.2Press or to select the desired menu and pressENTER.The submenu screen of the selected menu will ap-pear.3Press or to select the desired submenu andpress ENTER.The screen for the selected submenu will appear.4Press or to select the desired item you want,and press ENTER.Selectable items will be listed.5Press or to select the desired item and pressENTER.This completes the setting procedure.•To return to the previous screen, press RETURN.•To close the SETUP MENU, press SETUP.NOTES:•For items that require different operations from thebasic setting procedure, the setting procedure is de-scribed in each individual section.•The item which is indicated by green color cannot beselected.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERSETUP MENURETURN SETUPENTERENTER BACK ENDSELECTTIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERLANGUAGEPARENTALCLOCKDISC SETUPOTHERSETUP MENURETURN SETUPENTER BACK ENDSELECTENTERTIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERLANGUAGEOSD LANGUAGEDVD MENUAUDIOSUBTITLESETUP MENURETURN SETUPENTER BACK ENDENGLISHENGLISHAUTOMATICENGLISHSELECTENTERTIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERLANGUAGEOSD LANGUAGEDVD MENUAUDIOSUBTITLESETUP MENURETURN SETUPENTER BACK ENDENGLISHENGLISHAUTOMATICENGLISHSELECTENGLISHFRANCAISESPANOLOTHERAUTOMATICOFF----ENTERVarious settings 2G10101A P22-P32 2/10/05, 9:20 AM23
Various settings24Setting the languageYou can choose the language of the menu screen,DVD menu, DVD audio and subtitles.Preparation:• Turn ON the TV and set it to the video input mode.• Select “LANGUAGE” from “SYSTEM SETUP”. Forthe procedure, see steps 1 to 3 in “Using the SETUPMENU” on page 23.Selectable languages:ENGLISH, FRANCAIS, ESPANOLThe language you have selected will play if it is re-corded on the disc.ORIGINALThe unit will select the first priority language of eachdisc.OTHERIf you want to select another language, before press-ing ENTER, input the language code by using thenumeric keys. (See the Language code list on page82). Then press ENTER.• If you input a wrong number, press CANCEL.NOTE:If the selected language is not recorded on the disc,the first-priority language is selected.SUBTITLEWhen several subtitles languages are recorded on DVD,you can select the language to be used for the sub-titles. The selected language remains in effect after thepower is turned off or the disc is replaced.Select “SUBTITLE” and select the menu language fromthe below.Selectable languages:ENGLISH, FRANCAIS, ESPANOLThe subtitle is displayed with the selected languageif it is recorded on the disc.OTHERIf you want to select another language, before press-ing ENTER, input the language code by using thenumeric keys. (See the Language code list on page82). Then press ENTER.• If you input a wrong number, press CANCEL.AUTOMATIC• The unit will automatically select the same lan-guage in the AUDIO setting.• When the unit selects the same language as theAUDIO setting, the subtitles will not appear dur-ing playback.• When you do not use the same language as theAUDIO setting, the subtitles will appear duringplayback.OFFSubtitles do not appear.NOTE:If the selected language is not recorded on the disc,the first-priority language is selected.OSD LANGUAGEYou can set the language for on screen display.Select “OSD LANGUAGE” and select the language fromthe below.Selectable languages:ENGLISH, FRANCAIS, ESPANOLDVD MENUWhen several menu languages are recorded on a DVD,you can select the language to be used for the DVDmenu.Select “DVD MENU” and select the language from thebelow.Selectable languages:ENGLISH, FRANCAIS, ESPANOLThe selected language is the first priority menu lan-guage.OTHERIf you want to select another language, before press-ing ENTER, input the language code by using thenumeric keys. (See the Language code list on page82). Then press ENTER.• If you input a wrong number, press CANCEL.AUDIOWhen several audio languages are recorded on a DVD,you can select the audio language to be played back.The selected language remains in effect after the poweris turned off or the disc is replaced.Select “AUDIO” and select the audio language from thebelow.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERLANGUAGEOSD LANGUAGEDVD MENUAUDIOSUBTITLESETUP MENURETURN SETUPENTER BACK ENDENGLISHENGLISHAUTOMATICENGLISHSELECTENTER 2G10101A P22-P32 2/10/05, 9:20 AM24
25Various settingsSetting the parental controlSome discs are specified as not suitable for chil-dren. This unit can prevent playback of such discs.Preparation:• Turn ON the TV and set it to the video input mode.• Select “PARENTAL” from “SYSTEM SETUP”. For theprocedure, see steps 1 to 3 in “Using the SETUPMENU” on page 23.NOTES:• The selected level will apply to operations executedafter this.• The unit cannot restrict playback of some discs.• Some discs may not be encoded with specific ratinglevel information though its disc jacket says “adult”.Parental control will not work with those discs.• If you forget your password, open the disc tray; if thereis a disc inside then remove it and close the tray. Toreset the code press and hold number 7 on theremote control, then press and hold STOP on thefront panel at the same time. The On-Screen Displaywill show “PARENTAL UNLOCK”. You can now set anew password.Temporarily cancelling parental con-trolParental control can temporarily be cancelled with someDVDs.1Playback a DVD. (See page 33.)2If the DVD disc has been designed to temporarilycancel the rating level, the screen that follows the“READING” screen will change. If you select “YES”with the ENTER, the message “YOUR DISC EX-CEEDS THE PARENTAL CONTROL LEVEL1.”(e.g.) will then appear.3If you wish to cancel the set rating level temporarily,select “PARENTAL CONTROL LEVEL” with or, then press ENTER. If the password has beenselected, the password input screen will appear.Alternatively, if the password has not been set, play-back will commence. If you don’t know (or haveforgotten) the password, select “CANCEL PIC-TURE”.The setting screen will disappear. Press OPEN/CLOSE to remove the disc.4Use the numeric keys to input the password.• To interrupt the input process, press RETURN.5Press ENTER.6Playback will commence if the entered passwordwas correct.NOTE:This temporary cancellation of the rating level will re-main active until the disc is ejected.When the disc is ejected, the original rating level will beset again automatically.Selecting parental controlSelect “PARENTAL” and select the parental control levelfrom the below.Level Off: Parental control is turned off.Level 1:Adult discs and general discs (R-rateddiscs included) cannot be played back.Level 2 to 3: Adult discs and R-rated discs cannotbe played back.Level 4 to 7: Adult discs cannot be played back.(Level 4 to 7 discs contain content chil-dren age 15 and younger may not see.)Level 8: All discs can be played back withoutrestriction.Select from level 1 to level 8.On a scale of 1- 8, “1” is the most restrictive.To lock the selected parental control level1To lock the selected parental control level, press or to select “PASSWORD”.2Use the numeric keys to input a 4-digit password.• If you input a wrong number, press CANCEL.• Be sure to remember this number!3Press ENTER.To cancel the locked parental control level1Select “PASSWORD” shown in step 1 of the above sec-tion and use the numeric keys to input the password.2Press ENTER.The locked mark “” will change to an unlockedmark “ ”.Then, you can change the parental control level, orenter a new password.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERLANGUAGEPARENTALCLOCKDISC SETUPOTHERPARENTALPASSWORDPARENTALSETUP MENURETURN SETUPENTER BACK ENDDELETECANCEL----INPUT NO.09SELECTPARENTALOFFENTER----change to1234YOUR DISC EXCEEDS THE PARENTALCONTROL LEVEL 1.PARENTAL CONTROL LEVELCANCEL PICTURE 2G10101A P22-P32 2/10/05, 9:20 AM25
Various settings26Setting the clockThe clock is set to the correct time automatically,but it can also be set manually. The clock can beset for daylight saving time and time zone.Preparation:• Turn ON the TV and set it to the video input mode.• Select “CLOCK” from “SYSTEM SETUP”. For theprocedure, see steps 1 to 3 in “Using the SETUPMENU” on page 23.CLOCK (manually)You can manually set the date, year and present timewith the remote control.Ex.: Setting the clock to “10:20AM” March, 30th, 2005.1Select “CLOCK” and press ENTER.2Select the desired items using or (month,date, year, hour, minute and AM/PM), then pressENTER.3Press or to set the value of the selected item.• For the minutes, press or once to set thetime minute by minute, or hold down either ofbuttons for several seconds to set the time in 10-minute intervals.4Repeat steps 2 and 3 to set the date, year andpresent time, and press ENTER. The SETUPMENU will close.This completes clock time setting.AUTO CLOCKYou can automatically set the clock by turning “ON” theAUTO CLOCK function.When you want to set the auto clock function to “OFF”,select “AUTO CLOCK”, press ENTER and select “OFF” .For more information see page 22./01/05 12:00AM0103/30/05 10:20AM20STANDARD TIME (Time zone)In the rare event that you live within the broadcast rangeof two stations in two different time zones, the DVD/VCR may recognize the wrong station for the auto clockset. To correct the situation:Select “STANDARD TIME” and select the time zonefrom the below.Selectable time zones and correction timesATLANTIC: GMT – 4 hours(GMT: Greenwich Mean Time)EASTERN: GMT – 5 hoursCENTRAL: GMT – 6 hoursMOUNTAIN: GMT – 7 hoursPACIFIC: GMT – 8 hoursALASKA: GMT – 9 hoursHAWAII: GMT – 10 hoursAUTOMATIC: AUTO SETNOTES:• When shipped from the factory, the “TIME ZONE” isset to “AUTOMATIC”.• After making the auto clock setting, in some casesthe clock may display another time zone. You can cor-rect the clock by selecting your time zone settingabove.• When the clock is not set or you set the clock manu-ally, the time zone setting is not available.DAYLIGHT SAVING TIMEYou can set the clock to daylight saving time automati-cally or manually.To select daylight saving time, select “DAYLIGHT SAV-ING TIME” and select “ON”, while to cancel the day-light saving time, select “OFF”.ON: For manual setting (forward 1 hour)OFF: For manual setting (back 1 hour)AUTOMATIC: For automatic setting (read XDS in thesignal)NOTES:• When you want to set daylight saving time, on thefirst Sunday in April you set it to “ON”, and on the lastSunday in October you set it to “OFF”.• When shipped from the factory, the “DAYLIGHT SAV-ING TIME” option is set to “AUTOMATIC”.• When the clock is not set, the daylight saving timesetting is not available.• When there is no daylight saving time in your area,always select “OFF”.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERCLOCKCLOCK (MM/DD/YY)AUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEONAUTOMATICAUTOMATIC01/01/05 12:00AMSETUP MENURETURN SETUPENTER BACK ENDSELECT SELECTENTER 2G10101A P22-P32 2/10/05, 9:20 AM26
27Various settingsSetting the discTIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERDISC SETUPREFORMAT AS DVD VIDEOREFORMAT AS DVD VRNEW DISC FORMATFINALIZEPROTECT DISCUNDO FINALIZEDVD-RAM PHYSICAL FORMATPROCEEDVRPROCEEDOFFPROCEEDPROCEEDPROCEEDSETUP MENURETURN SETUPENTERENTER BACK ENDSELECTREFORMATSTART CANCELFINALIZINGPLEASE WAITREFORMATFINALIZESTART CANCELNEW DISC FORMATSTART CANCELINITIALIZING DISCYou can format, protect, or finalize a disc.Preparation:• Turn ON the TV and set it to the video input mode.• Select “DISC SETUP” from “SYSTEM SETUP”. Forthe procedure, see steps 1 to 3in “Using the SETUPMENU” on page 23.REFORMATYou can format a recorded DVD-RAM/RW.Check the content of the disc before format. If you for-mat the disc, the recorded content of the disc will beerased.To format a disc in the Video mode, select “REFOR-MAT AS DVD VIDEO”, and to format it in the VR mode,select “REFORMAT AS DVD VR”. You cannot select“REFORMAT AS DVD VIDEO” when DVD-RAM in-serted. The screen below will appear.• When you select “START” and press ENTER, formatwill start. The screen below will appear.• When you select “CANCEL” and press ENTER, theDISC SETUP screen will appear.NOTES:• You cannot format Ver. 1.0 DVD-RW and DVD-R.• You cannot format a disc if the disc protection is “ON”.In such a case, be sure to cancel the disc protection(see page 28) before format.You cannot format a DVD-RAM in the Video mode.NEW DISC FORMATIf you insert an unused DVD-RW disc, the disc is auto-matically formatted.If you use the DVD-RW (Ver.1.1/1.2), you can selectthe mode to be used for automatic format.Select “NEW DISC FORMAT” and select the mode fromthe list below.VR: Format the disc in the VR mode.VIDEO: Format the disc in the Video mode.When you insert an unused disc, the following mes-sage screen will appear.• When you select “START” and press ENTER, formatwill start. The screen below will appear.• When you select “CANCEL” and press ENTER, thenormal TV screen will appear.NOTE:If a recorded disc has scratches or contamination on it,the “NEW DISC FORMAT” screen may appear.If this happens, select “CANCEL”.FINALIZETo play a DVD disc recorded on this unit you must finalizethe disc to insure compatibility with other DVD players. Inaddition if you are using a DVD-RW disc you must recordin Video mode.When “FINALIZE” is selected, the screen below willappear.• When you select “START” and press ENTER, final-ization will start. The screen below will appear.•• When you select “CANCEL” and press ENTER,the DISC SETUP screen will appear. 2G10101A P22-P32 2/10/05, 9:20 AM27
Various settings28Setting the disc / Other (SYSTEM SETUP)UNDO FINALIZEYou can cancel the finalization of a finalized DVD-RW(in VR mode).You cannot cancel the finalization for discs other thanabove. You can record or edit on a disc whose finaliza-tion has been cancelled.Select “UNDO FINALIZE”, and the screen below willappear.• When you select “START” and press ENTER, thecancelling finalization will start. The screen below willappear.• When you select “CANCEL” and press ENTER, theDISC SETUP screen will appear.NOTES:• During the cancelling finalization the cursor will moverepeatedly.• The cancelling finalization process may require a fewminutes to about 1 hour according to disc type or theamount of free space on the disc.• When the disc’s finalization cannot be cancelled, youcannot select “UNDO FINALIZE”.DVD-RAM PHYSICAL FORMATPhysically formats a DVD-RAM disc. Whenever you usea new disc for the first time, be sure to format it.This section describes the other setting in SYSTEMSETUPPreparation:• Turn ON the TV and set it to the video input mode.• Select “OTHER” from “SYSTEM SETUP”. For the pro-cedure, see steps 1 to 3 in “Using the SETUP MENU”on page 23.DIMMER (Brightness of the displaywindow)You may adjust the brightness or turn off the display onthe front panel of the unit.Select “DIMMER” and select the display window statusfrom the below.AUTOMATIC: When the power is on, the display win-dow appears bright. When the poweris off, it appears dark.DIM: The window display always appearsdark.OFF: When the power is on, the display win-dow appears dark. When the poweris off, it is turned off.DISPLAY (Turning the screen display“ON” or “OFF”)You can turn off the screen display that is output to theTV screen by this unit. Select “DISPLAY”, and select“ON” or “OFF”.ON: The screen display appears.OFF: Nothing but the SETUP MENU and error mes-sages appear.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERLANGUAGEPARENTALCLOCKDISC SETUPOTHERSETUP MENURETURN SETUPENTER BACK ENDSELECTOTHERDIMMERDISPLAYAUTOMATICONENTERUNFINALIZINGPLEASE WAITNOTES:• During the finalization the cursor will move repeatedly.When the finalization finished, “DISC FINALIZED” willappear.• The finalization process may require a few minutesto about 1 hour according to disc type or the amountof free space on the disc.• You can record or edit a finalized DVD-RW (in VRmode) by cancelling the finalizing, but you cannot dothese operations with a DVD-RW (Video mode), orwith a DVD-R.• You cannot playback a disc recorded on VR mode ona unit that does not support DVD-RW.• Even if you finalize a disc in the Video mode, the disccannot be played back in some DVD players.• A DVD-R disc cannot be named after it is finalized.PROTECT DISCYou can protect a disc to prevent the content recordedon it from being erased, edited or re-recorded.Only DVD-RW (in VR mode) can be protected.Select “PROTECT DISC” and select “ON” to protect thedisc.To cancel the disc protection, select “OFF”.UNDO FINALIZESTART CANCEL 2G10101A P22-P32 2/10/05, 9:20 AM28
29Various settingsSetting the screenNote for the field still and frame still:(with 480i interlaced scanning mode)• Field* still (240 lines)Since only one field (half of the video information) isshown on the TV screen, the picture appears roughbut does not shake.• Frame* still (480 lines)Two fields are alternatively shown on the TV screen.The picture shakes but the resulting picture quality issuperior to the field still pictures.Field*: A field refers to the video information in one-half of a frame. 1 frame (screen) consists of 2fields.Frame*: A frame refers to the total area occupied byeach picture on the TV screen.LINE1 INPUT/LINE2 INPUTThis unit comes with an S-Video input jack and Videoinput jack. If both jacks are used, the priority jack canbe selected.Select “EXTERNAL VIDEO INPUT” and select the modefrom the below.AUTOMATICThe S-Video input jack has priority.COMPO. VIDEOThe video signal is input only from the video inputjack.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERAV SETUP 1TV SCREENSTILL MODELINE1 INPUTLINE2 INPUTSETUP MENURETURN SETUPENTER BACK END4:3 Letter boxAUTOMATICVIDEOVIDEOSELECTENTERThis section describes settings about the screen.Preparation:• Turn ON the TV and set it to the video input mode.• Select “AV SETUP 1” from “AV SETUP”. For the pro-cedure, see steps 1 to 3 in “Using the SETUP MENU”on page 23.TV SCREENYou can select the TV screen size to suit the screenimage.Select “TV SCREEN” and select screen size from thebelow.4:3 Pan scanIt displays a wide picture across the whole screenwith left and right edges automatically cut off.4:3 Letter boxSelect this mode when connecting to a conventionalTV. When playing back a wide screen DVD disc, itdisplays a wide picture with black bands at the topand bottom of screen.16:9Select this mode when connecting to a wide-screenTV. A wide-screen picture is displayed in full size.NOTE:If the DVD disc is not formatted in the pan scan format,it displays a 4:3 aspect ratio.STILL MODEYou can set the type of image displayed on the TVscreen when the playback of the DVD is stilled.Select “STILL MODE” and select the image to be dis-played from the below.AUTOMATICThe field still or frame still is automatically selected.(For normal use.)STILL BY FRAMEThe frame still is set. 2G10101A P22-P32 2/10/05, 9:20 AM29
Various settings30This section describes image quality settings.Preparation:• Turn ON the TV and set it to the video input mode.• Select “AV SETUP 2” in “AV SETUP”. For the proce-dure, see steps 1 to 3 in “Using the SETUP MENU”on page 23.BRIGHTNESSYou can control the brightness level of the image.Select “BRIGHTNESS” and select the level from thebelow.MAX: The image becomes brighter.STD: The image is of standard brightness.MIN: The image becomes darker.Setting the image quality / Setting the audioThis section describes audio settings.Preparation:• Turn ON the TV and set it to the video input mode.• Select “AUDIO” from “AV SETUP”. For the procedure,see steps 1 to 3 in “Using the SETUP MENU” on page23.DRCDRC (Dynamic Range Control) enables you to controlthe dynamic range so as to achieve a suitable soundfor your equipment.Select “DRC” and select the level from the below.MAX: Full dynamic range is maintained.STD: Full dynamic range is reduced.TV: Dynamic range is reduced.NOTES:• This function works only during playback of DolbyDigital recorded discs.• When you listen to the sound from TV’s speaker, werecommend that you select “TV”.• The level of Dynamic Range Reduction may differdepending on the DVD.VIRTUAL SURROUND (Spatializer N-2-2TM)Sound that is not recorded in the surround mode willbe changed to artificial surround sound and output.Select “VIRTUAL SURROUND” and select “ON” to ac-tivate the virtual surround function. To not use the vir-tual surround, select “OFF”.NOTE:This function does not work with a video tape.EXTERNAL AUDIO INPUTThe audio mode for the audio input jack can be se-lected, choosing either stereo or monaural.Select “EXTERNALAUDIO INPUT” and select from thebelow.STEREO: The sound is treated as stereo sound.L CH: The sound is treated as the monauralsound of the left channel.R CH: The sound is treated as the monauralsound of the right channel.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERAUDIODRCVIRTUAL SURROUNDEXTERNAL AUDIO INPUTSAPSTDOFFSTEREOOFFSETUP MENURETURNENTER BACK ENDSELECTSETUPENTERTIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERAV SETUP 2BRIGHTNESSE.B.L.SETUP MENURETURN SETUPENTER BACK ENDSTDONENTERSELECTE.B.L.To select the black level of playback pictures, set youpreference and monitor’s ability.ON: Enhanced grey scale (0 IRE cut off)OFF: Standard grey scale (7.5 IRE cut off)Note:The E.B.L. function only works when playing back DVD-Video, DVD-RAM/RW/R or Video-CDs. 2G10101A P22-P32 2/10/05, 9:20 AM30
31Various settingsSetting the audio / Setting the recordingSAP (Second Audio Program)This unit is fitted with an SAP broadcast system thatenables you to switch to a second audio program whileviewing a selected channel.This function applies only when the program is broad-cast in multiple languages through the SAP broadcastsystem.Select “SAP” and select “ON” to use SAP, and to notuse it, select “OFF”.Listening to SAPWhen the unit is turned on or a channel selection ismade, make certain the letters “SAP” appear on thescreen. This means that “Second Audio Program” broad-casting is available.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERREC SETUPINITIAL REC TOINITIAL REC MODEAUTO CHAPTERINDEX PICTUREBLACK LEVEL (REC)SETUP MENURETURN SETUPENTER BACK ENDDVDSP10MIN0SECSTANDARDSELECTENTERThis section describes recording settings.Preparation:• Turn ON the TV and set it to the video input mode.• Select “REC SETUP”. For the procedure, see steps1 to 3 in “Using the SETUP MENU” on page 23.INITIAL REC TOYou can select the recording media that is first displayedin the item “REC TO” on the timer recording screen.Select “INITIAL REC TO” and select “DVD” or “VCR”.INITIAL REC MODEYou can select the recording mode that is first displayed inthe item “REC MODE” on the timer recording screen.Select “INITIAL REC MODE” and select XP, SP, LP, orSLP.NOTE:For the DVD recording mode, see page 52. And for theVCR recording mode, see page 48.AUTO CHAPTERYou can automatically make chapter marks on the DVDto be recorded.Select “AUTO CHAPTER” and select the interval be-tween chapter marks from the below.OFF: The automatic chapter is not used.5 MIN: The interval is set to 5 minutes.10 MIN: The interval is set to 10 minutes.15 MIN: The interval is set to 15 minutes.30 MIN: The interval is set to 30 minutes.INDEX PICTUREYou can set the time that the thumbnail image is regis-tered in the title menu of DVD-RW (VR mode).Select “INDEX PICTURE” and select from the below.0 SEC: The image of a recording start point is regis-tered.1 MIN: The image 1 minute after a recording start isregistered.3 MIN: The image 3 minutes after a recording startis registered.NOTE:You cannot select the thumbnail image for Video mode.BLACK LEVEL (REC)You can set the black level for when you record.STANDARD: Records at the level of the inputsource.ENHANCED: Lowers the level 7.5IRE and records. 2G10101A P22-P32 2/10/05, 9:21 AM31
Various settings32Setting the channel / Setting other itemsThis DVD/VCR is equipped with a channel memoryfeature that allows you to skip channels up or downto the next channel set in memory, hence skip overunwanted channels.Before selecting channels, they must be pro-grammed into the DVD/VCR’s memory. In additionto normal VHF and UHF channels, this DVD/ VCRcan receive up to 113 Cable TV channels. To usethis DVD/VCR with an antenna, set the TV/CABLEmenu option to the TV mode. When shipped fromthe factory, this menu option is in the CABLE mode.Preparation:• Turn ON the TV and set it to the video input mode.• Select “CH SETUP”. For the procedure, see steps 1to 3 in “Using the SETUP MENU” on page 23.TV/CABLE SELECTSelect “TV/CABLE SELECT” and select “TV” or“CABLE”.TV: VHF/UHF channelsCABLE: CABLE TV channelsAUTO CH MEMORYThe VCR can receive a maximum of 181 channels bypresetting the channels into memory.When you select “AUTO CH MEMORY” and press EN-TER.The AUTO CH MEMORY function will be activated.The channel display will count up and, when finished,the screen returns to normal.ADD/DELETE (channels)You can add the channels you want or delete the chan-nels you do not want manually.Select “ADD/DELETE” and select “ADD” or “DEL.” foreach channel.• Press or to select the channel.The numeric keys can also be used for selection.• When you want to delete the selected channel, press to select “DEL” and press ENTER.• When you want to use the selected channel, press to select “ADD” and press ENTER.You can set the switching interval between playedback images in the slide show mode.Preparation:• Turn ON the TV and set it to the video input mode.• Select “OTHER”. For the procedure, see steps 1 to 3in “Using the SETUP MENU” on page 23.JPEG INTERVALYou can select the interval time for JPEG slide show(page 46).Select “JPEG INTERVAL” and select the switching in-terval between images from the below.OFF: The slide show mode is not used.5 SEC: The interval is set to 5 seconds.10 SEC: The interval is set to 10 seconds.15 SEC: The interval is set to 15 seconds.TIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHERCH SETUPTV/CABLE SELECTAUTO CH MEMORYADD/DELETECABLEPROCEEDPROCEEDSETUP MENURETURNENTER BACK ENDSELECTSETUPENTERTIMER REC SETSYSTEM SETUPAV SETUPREC SETUPCH SETUPOTHEROTHERJPEG INTERVALSETUP MENURETURN SETUPENTER BACK ENDOFFENTER 2G10101A P22-P32 2/10/05, 9:21 AM32
Disc playback33Playback procedurePreparation:• Turn ON the TV and set to the video input mode.• Press DVD to select the DVD mode. (The DVD indicator will light.)1Press OPEN/CLOSE.The disc tray will open.2Insert a disc.Disc without a cartridgeInsert with the playback sidedown.Place a disc to fit the guide.If a disc is out of the guide, it mayresult in damage to the disc ormalfunction.DVD-RAM disc with cartridge(TYPE1/TYPE2/TYPE4)Single sidedTurn the printed side up, andinsert the cartridge into the trayframe following the direction of thearrow on the cartridge.Double sidedTurn the desired recording/playback side up, and insert thecartridge into the tray frame following the direction of the arrowon the cartridge.3Press OPEN/CLOSE to close thedisc tray.“READING” appears on the screenand some discs start playback au-tomatically.• A menu screen may appear onthe TV screen, if the disc has a menu feature. In this case, press, , , or ENTER to operate a menu feature.4Press PLAY to start playback.5Press STOP to end playback.• The DVD/VCR memorizes the stopped point, depending onthe disc. “ ” appears on the screen for approx. 4 seconds.“” keeps blinking in the display until the playback is stoppedcompletely. Press PLAY to resume playback (from the scenepoint).• If you press STOP again (“ ” appears on the screen), the DVD/VCR will clear the stopped point.6Then press OPEN/CLOSE.The disc tray opens.Remove the disc and press ON/STANDBY.The disc tray closes automatically and DVD/VCR turns off.Disc palybackNOTES:• If a non-compatible disc is loaded,“INCORRECT DISC”, “REGIONCODE ERROR” or “PARENTALERROR” will appear on the TV screenaccording to the type of loaded disc.In this case, check your disc again(See pages 9 and 25).• Some discs may take a minute or soto start playback.• A prohibition symbol “ ” may appearat the upper right of the screen. Thissymbol means either the feature youtried is not available on the disc, or theDVD/VCR can not access the featureat this time. This does not indicate aproblem with the DVD/VCR.• When you set a single-faced disc labeldownwards (ie. the wrong way up) andpress PLAY or OPEN/CLOSE,“READING” will appear and then it willchange to “NO DISC”.• Some playback operations of DVDsmay be intentionally fixed by softwareproducers. Since this DVD/VCR playsDVDs according to the disc contentsthe software producers designed,some playback features may not beavailable.Also refer to the instructionssupplied with the DVDs.• When playing DTS-encoded AudioCDs, excessive noise will be heardfrom the analog stereo outputs. Toavoid possible damage to the audiosystem, the consumer should takeproper precautions when the analogstereo outputs of the DVD/VCR areconnected to an amplification system.READING 2G10101A P33-P39 2/10/05, 9:21 AM33
Disc playback34Playback by selecting a titleWhen playing back a recordeddisc, you can display the titlemenu and select the title to beplayed back.Preparation:• Turn ON the TV and set to the video input mode.• Load a recorded DVD.• Press DVD to select the DVD mode. (The DVD indicator will light.)1Press TITLE MENU.The title menu will appear.If there are many original titles and playlists...Before pressing TITLE MENU, press DVD MENU until “VR ORG”or “VR PL” will appear on the upper right of the TV screen, thenpress TITLE MENU.The first original title or playlist will be highlighted.2Press or to select the title you want to playback.3Press ENTER.The selected title is played back.NOTES:• If you don’t display the title menu and press PLAY, the first title isplayed back.• The title menu is used not only for playing back titles but also forediting various discs and titles. For details of editing operation, seepage 62.• If you create a playlist, an original title and playlist appear in the titlemenu. For creating a playlist, see page 63.• In case the disc includes more than 10 titles, you can turn to the nextor the previous page. Press , then press or to display next/previous page. To return to normal use, press .• You cannot switch to the VCR mode when the title menu is showing.Press TITLE MENU to clear the title menu, then press VCR to switchto the VCR mode.RETURNPLAY BACKSETENDSELECTTITLEMENUENTERTITLE MENUOriginal titlesPlaylist Thumbnail imageRecording informationDISC NAME:----11/23/2005 08:41AM 006 SLP11/25/2005 10:03PM 011 SP11/29/2005 11:30AM 009 SP12/01/2005 06:52PM 006 XP11/23/2005 08:41AM 006 SLP PLREC DATE :11/23/2005TIME :08:41AMLENGTH :00:30:17CHANNEL :006REC MODE :SLPRETURNPLAY BACKSETENDSELECTTITLEMENUENTERTITLE MENUDISC NAME:----11/23/2005 08:41AM 006 SLP11/25/2005 10:03PM 011 SP11/29/2005 11:30AM 009 SP12/01/2005 06:52PM 006 XP11/23/2005 08:41AM 006 SLP PLREC DATE :11/29/2005TIME :11:30AMLENGTH :00:59:45CHANNEL :009REC MODE :SPNOTE:When a disc that has been recordedin the Video mode is finalized, the titlemenu is automatically changed thatcan be played back even with otherDVD players. Thumbnail image andrecording information will not appearin the title menu after finalizing————1/111/23/2005 08:41AM 006 SLP11/25/2005 10:03PM 011 SPPREVNEXT11/29/2005 11:30AM 009 SP12/01/2005 06:52PM 006 XP11/23/2005 08:41AM 006 SLP PL 2G10101A P33-P39 2/10/05, 9:21 AM34
Disc playback35Checking media informationDISC NAME----MEDIA TYPE DVD VIDEOTITLE ORIGINAL35REMAINING TIME----/SPDISC PROTECT NOFINALIZED YESFinalizeDisc protectRemaining time*TitleMedia typeDisc nameVarious information on the loadeddisc can be displayed on the TVscreen.Preparation:• Turn ON the TV and set it to the video input mode.• Load the disc.• Press DVD to select the DVD mode. (The DVD indicator will light.)1Press DISPLAY.Media information will appear.2Press DISPLAY while the media information above is displayed.The next media information will appear.*The remaining time displayed during recording may be differentfrom the actual remaining time. When you want to check the cor-rect remaining time, stop recording and display the media infor-mation again.3Press DISPLAY again while the media information above is dis-played. The media information will disappear.TITLE 01/35 TIME 00:25:41CHAPTER 08/38 SUBTITLE OFFANGLE 01/01 REC MODE SPAUDIO 01/03ENG Dolby DigitalCLOCK 10:27 AM CH 03Playback condition(playback, stop,pause and record)The number ofaudio languagesand presentlanguagePlayback elapsed timeCurrentsubtitleslanguageRecording modeThe number of titles and present title numberpresent channelpresent timeThe number of angles and present angle numberThe number of chapters andpresent chapter numberTITLE 11/11 ORG TIME 00:25:41CHAPTER 01/01 SUBTITLE--/--ANGLE 01/01 REC MODE SPAUDIO 01/01CLOCK 12:00 AM CH 007Dolby Digital*If you press DISPLAY during chase playback, the informationscreen is displayed.The symbols indicate that the player is in chase playback.The progress bar shows the current position of playback and theposition of recording. Normally the recording position is shownas being at 100%. Items other than these appear the same as ona normal information screen.Current recordingposition(Fixed at 100%)Current PlaybackpositionNOTES:• The displayed information varieswith the type of media.• Some information may not appeardue to media type or operatingconditions.• In stop mode, some informationdoes not appear. 2G10101A P33-P39 2/10/05, 9:21 AM35
Disc playback36Special playbackNOTE: There may be a slight de-lay between pressing the buttonand the function activation.Fast forward playbackPress SEARCH during normal playback.Each press of SEARCH will increase the speed of the search(x2), (x12), (x24), (x60).(The speed of the serch is increased up to only 2 steps in Audio CD.)• To resume normal playback, press PLAY.Review playbackPress SEARCH during normal playback.Each press of SEARCH will increase the speed of the search (x2), (x12), (x24), (x60).(The speed of the serch is increased up to only 2 steps in Audio CD.)• To resume normal playback, press PLAY.Still playbackPress PAUSE/STILL during normalplayback.To resume normal playback, pressPLAY.Frame advancePress PAUSE/STILL during still play-back.One frame is advanced each time youpress PAUSE/STILL.To resume normal playback, pressPLAY.Slow motion playbackPress SLOW during normal playback or still playback.Each press of SLOW will change the speed of the slow “ 1/2”,“1/4”, “ 1/8”.• To resume normal playback, press PLAY.• To resume the still playback, press PAUSE/STILL.Locating a chapter or trackPress SKIP Forward or SKIP Reverse during playback tolocate a chapter that you want to watch.Each time you press the button, a chapter or track is skipped.NOTES:• The unit is capable of holding a still video image or On screen display image on your television screen indefi-nitely. If you leave the still video image or On screen display image displayed on your TV for an extended periodof time, you risk permanent damage to your television screen. Projection televisions are very susceptible.• Fast forward and review playback does not work with a MP3/WMA/JPEG-CD.• Frame advance and slow motion does not work with a CD. 2G10101A P33-P39 2/10/05, 9:21 AM36
Disc playback37Instant skip / Locating a specific sceneInstant skipUse this function to skip commercials while you playback.Press INSTANT SKIP during playback.The time jumps to a point approx. 30 seconds later and playback re-sumes.NOTE:With some DVD-Video, the Commercial skip operation may not work.Locating a specific sceneSpecify the time recorded on the disc, chapter or title to playback.1Press PLAY MODE.The play mode screen will appear.2Press or to select “TIME SEARCH”, “CHAPTER SEARCH”or “TITLE SEARCH”, and press ENTER.TIME SEARCH: Input the time until the playback is restarted.CHAPTER SEARCH: Select the chapter number to be played back.TITLE SEARCH: Select the title number to be played back.The screen above shows the display when “CHAPTER SEARCH”is selected.3When selecting “TIME SEARCH”, input the time until the playbackis restarted with the numeric keys. When selecting “CHAPTERSEARCH” or “TITLE SEARCH”, press or to select the chap-ter number or title number.4Press ENTER.The playback starts at the point you selected.NOTE:For “REPEAT”, see “Title, Chapter repeat playback” (page 38).TIMESEARCHCHAPTERSEARCHTITLESEARCH REPEATNOTE:You cannot switch to the VCR modewhen the play mode screen isshowing. Press PLAY MODE to clearthe play mode screen, then pressVCR to switch to the VCR mode.TIMESEARCHCHAPTERSEARCHTITLESEARCH REPEATCHAPTER1CHAPTER2CHAPTER3 2G10101A P33-P39 2/10/05, 9:21 AM37
Disc playback38NOTES:• Some discs may not work with therepeat operation.• InA-B repeat mode, subtitles nearpoint A or B may not appear.• A-B repeat does not work duringthe Title and the Chapter repeatplayback.• You may not be able to set A-Brepeat, depending on the scenesof the DVD.• A-B repeat and Title, Chapter re-peat does not work with a MP3/WMA/JPEG-CD and Video CD.• You cannot switch to the VCRmode when the play mode screenis showing. Press REPEAT toclear the play mode screen, thenpress VCR to switch to the VCRmode.Repeat playbackABA1Press A-B REPEAT during play-back.The start point is selected.2Press A-B REPEAT again.The end point is selected. Playbackstarts at the point that you selected.Playback stops at the end point,returns to point A automatically,then starts again.To resume normal playback press A-B REPEAT again.“OFF” appears on the screen.Title, Chapter repeat playback1Press REPEAT.The play mode screen will appear.2Press or to select “REPEAT” and press ENTER.3Press or to select “OFF”, “CHAPTER” or “TITLE”.OFF: Playback is not repeated.CHAPTER: The chapter in playback is repeatedly played back.TITLE: The title in playback is repeatedly played back.4Press ENTER.To cancel the repeat playback, select “OFF” in step 3.Instant replayThis feature can be used to repeat the last 10 seconds of viewedmaterial, and continues to play as normal.Press INSTANT REPLAY during playback.The video returns to a point 10 seconds before and playback resumes.NOTES:• If the time from the title top is less than 10 seconds when INSTANTREPLAY is pressed, the title top is repeated and then the video isplayed back.• With some DVD-Video, the one touch repeat operation may not work.TIMESEARCHCHAPTERSEARCHTITLESEARCH REPEATOFFCHAPTERTITLETIMESEARCHCHAPTERSEARCHTITLESEARCH REPEATA-B repeat playbackA-B repeat playback allows you to repeat material between twoselected points. 2G10101A P33-P39 2/10/05, 9:21 AM38
Disc playback39Title selection / DVD menuNOTE:Depending on the DVD, you may beunable to select the title, and a “titlemenu” may simply be called a“menu” or “title” in the instructionssupplied with the disc.Title selectionTwo or more titles are recorded on some discs. If the title menu isrecorded on the disc, you can select the desired title.1Press TOP MENU/TITLE MENU during playback.The title menu appears on the screen.• Press TOP MENU/TITLE MENU again to resume playback atthe scene when you pressed TOP MENU/TITLE MENU.2Press / or / to select the desired title.3Press ENTER.The playback of the selected title will start.DVD menuSome DVDs allow you to select the disc contents using the menu.When you playback these DVDs, you can select the subtitles lan-guage and soundtrack language, etc. using the DVD menu.1Press DVD MENU during playback.The DVD menu appears on the screen.• Press DVD MENU again to resume playback at the scene whenyou pressed DVD MENU.2Press / or / to select the desired item.3Press ENTER.The menu continues to another screen. Repeat steps 2 and 3 toset the item completely. 2G10101A P33-P39 2/10/05, 9:21 AM39
Disc palyback401/8 Eng Dolby DigitalOffKaraoke playbackYou can turn the vocal on or off recorded on the DVD KARAOKE.1During DVD KARAOKE disc play-back, press AUDIO.The KARAOKE symbol ( ) ap-pears.• If you play non-Karaoke disc, theKARAOKE symbol ( ) does notappear.• Some Karaoke discs may not havethe vocal on/off function. In this case, the KARAOKE symbol ( )does not appear.2Press B or A to select “On” or “Off”.On : The primary vocal is output when it is recorded on the disc.Off : The primary vocal is not output.• The on screen display will disappear after a few seconds.?Changing angles / Zooming / Karaoke playbackx2Changing anglesWhen playing back a disc recorded with multi-angle facility, youcan change the angle that you are viewing the scene from.1Press ANGLE during playback.The current angle will appear.2Press ANGLE repeatedly until the desired angle is selected.ZoomingThis unit will allow you to zoom in on the frame image. You canthen make selections by switching the position of the frame.1Press ZOOM during playback.The center part of the image willbe zoomed in.Each press of ZOOM will changethe ZOOM “x2” , “x3” and “x4”.2Press / or / to view a different part of the frame.You may move the frame from the center position to UP, DOWN,LEFT or RIGHT direction.3In the zoom mode press ZOOM repeatedly to return to a 1:1 view“x1”.Angle 1 out of 3NOTES:• Depending on the DVD, you maynot be able to change the angleseven if multi-angles are recordedon the disc.• You can use the Pause, Slow,Search or Skip feature in thezoom mode.• The vocal output feature is usedduring playback of Dolby Digital(multi-channel) recorded DVDKARAOKE discs. This featureallows you to turn off vocal audiotracks, or restore them forbackground accompaniment.• When playing Karaoke, connectappropriate audio equipmentsuchas an amplifier to the TV/DVD. 2G10101A P40-P46 2/10/05, 9:21 AM40
Disc playback41Changing soundtrack language / Subtitles / Kraoke playbackAudio 1/8 ENG Dolby DigitalAudio 2/8 FRA Dolby DigitalSubtitle OFFSubtitle 1/32 ENGChanging soundtrack languageYou can select the language when you play a multilingual disc.1Press AUDIO during playback.The current soundtrack languagewill appear.2Press AUDIO repeatedly until thedesired language is selected.The on-screen display will disap-pear after a few seconds.Turning the subtitles On and OffWhen playing back a disc recorded with subtitles, you can turnthe subtitles on or off.Press SUBTITLE during playback until“Subtitle OFF” appears.Changing the subtitles languageYou can select the language when playing back a disc recordedwith multilingual subtitles.Press SUBTITLE repeatedly duringplayback until your desired languageappears.The on screen display will disappearafter a few seconds.NOTES:• If the desired language is not heardafter pressing the button severaltimes, the language is not recordedon the disc.• Changing soundtrack or subtitleslanguage is cancelled when youopen the disc tray. The initial defaultlanguage or available language willbe heard and seen if the disc isplayed back again.• Depending on the DVD you may beunable to turn on, turn off, or changethe subtitles, even if they are re-corded on the disc. While playingthe DVD, the subtitles may changewhile opening or closing the disctray, or while changing the title.• In some cases, the subtitles lan-guage is not changed to the se-lected one immediately.AUDIO LR AUDIO L AUDIO RAUDIO 1/2 LR AUDIO 1/2 RAUDIO 1/2 LAUDIO 2/2 R AUDIO 2/2 LRAUDIO 2/2 L33333In case of VIDEO CD playbackAudio type will change as follows each time you press AUDIO.VIDEO CDS-VCD 2G10101A P40-P46 2/10/05, 9:21 AM41
Disc palyback42Various operations on CDPreparation:• Turn ON the TV and set to the video input mode.• Load the music CD.• Press DVD to select the DVD mode. (The DVD indicator will light.)Press TOP MENU/TITLE MENU.The TRACK INFO screen willappear.This section describes the TRACKINFO screen where music CDs canbe played back using the variousoperations.Track 02Track 03Track 04Track 05Track 06Track 07Track 08Track 09Track 10Track 01Track 0100:00:19/00:03:5400:00:19/00:45:28MODE: NORMALREPEAT: OFFTRACK INFOENTERRETURNPLAY BACK ENDSELECT SETTITLEMENUThe elapsed time andtotal time of the musicdata (during playback)Scroll barThe elapsed time andtotal time of the whole CDCurrent playback modeThe track numberduring playbackThe music datarecorded on the CDPress . The menu list will appear.Playing back a selected track1Press or to select the track number you want to playbackand press .2Press or to select “PLAY” from the menu list and press ENTER.The selected track will be played back.Excluding specified track1During stop, press or to select the track number you do notwant to playback and press .2Press or to select “HIDE/SHOW” from the menu list and pressENTER.The selected track will not be played back. (“H” appears at the sideof the track number.)When you want to cancel the exclusion, press or to select thetrack number with “H” and press .Press or to select “HIDE/SHOW” from the menu list and pressENTER, “HIDE” will be cancelled.NOTES:• In case the disc includes more than10 tracks, you can turn to the nextor the previous page. Press ,then press or to display next/previous page. To return to normaluse, press .• You cannot switch to the VCRmode when the TRACK INFOscreen is showing. Press TOPMENU/TITLE MENU to clear theTRACK INFO screen, then pressVCR to switch to the VCR mode.Track 02Track 03Track 04Track 05Track 06Track 07Track 08Track 09Track 10Track 01Track 0100:00:19/00:03:5400:00:19/00:45:28Mode: NORMALREPEAT: OFFTRACK INFOENTERRETURNENTER BACK ENDSELECTTITLEMENUSETPLAYHIDE/SHOWRANDOM PLAYREPEAT TRACKREPEAT ALLPROGRAM PLAYBACKTIME SEARCHPLAYMenu list 2G10101A P40-P46 2/10/05, 9:21 AM42
Disc playback43Various operations on CDNOTE:When recording on a CD-R/CD-RWin the MP3 or WMA modes, “RAN-DOM PLAY” and “TIME SEARCH”will not appear in the menu list.Random playback1Press or to select “RANDOM PLAY” from the menu list andpress ENTER.The order of music tracks is randomly changed.2Press PLAY.Music is played back in random order.To cancel random playback, select “RANDOM PLAY” from the menulist again, and press ENTER.Repeat playback of selected track1Press or to select the track number you want to repeat play-back and press .2Press or to select “REPEAT TRACK” from the menu list andpress ENTER.3Press PLAY.The selected track will be played back repeatedly.To cancel repeat track playback, select “REPEAT TRACK” from themenu list again, and press ENTER.Repeat playback of all tracks1Press or to select “REPEAT ALL” from the menu list andpress ENTER.2Press PLAY.All tracks on CD will be played back repeatedly.To cancel the repeat all playback, select “REPEAT ALL” from the menulist again, and press ENTER.Playing back programsYou can specify the playback order yourself.1Press or to select “PROGRAM PLAYBACK” from the menulist and press ENTER.2Press or to select to the track number that you want tochange the order of and press ENTER.The “ ” mark will appear at the right side of the track number.3Press or to select to the track number that you want tospecify and press ENTER.The track number that you select in step 2 moves to the positionthat you specified.4Repeat steps 2 and 3 to change the playback order.5Press PLAY.The tracks will be played back in the changed order.To cancel program playback, select “EXIT PROGRAM MODE” fromthe menu list and press ENTER.Playing back track by specifying the time1Press or to select “TIME SEARCH” from the menu list dur-ing playback and press ENTER.2Press / or / to specify the elapsed time of the track (thiswill be the starting point of playback) and press ENTER.Playback will start from the specified elapsed time. 2G10101A P40-P46 2/10/05, 9:22 AM43
Disc palyback44MP3/WMA/JPEG playbackMP3 and WMA files can be playedback. Also, you can display JPEGfiles on the TV screen and enjoythem as a slide show.Some discs may not play due tothe condition of the recording.Limitations on MP3/WMA/JPEG CD playback:• MP3/WMA/JPEG CD is a disc thatis standardized by ISO9660.• The directory and file names of theMP3/WMA/JPEG CD must corre-spond to the ISO standardized filenames.• This unit can read 200 files perdirectry. If one directory has morethan 200 files, it reads up to 200files, the remaining files will beomitted.• The unit is able to recognize up toa maximum of 50 directories perdisc.• MP3/WMA CDs cannot be used forplayback for the purpose ofduplicating.• MP3/WMA/JPEG CDs may beused for playback, but not forrecording.• If the CD has both audio tracks andMP3/WMA/JPEG files, only audiotracks are played.• It may take more than one minutefor this unit to read MP3/WMA/JPEG files depending on its struc-ture.• Music recorded by “Joliet Record-ing Specification” can be playedback. Long file names will be cut.• The music files recorded by “Hier-archical File System ” (HFS) can-not be played.Preparation:• Turn ON the TV and set to the video input mode.• Load the disc storing MP3, WMA or JPEG.• Press DVD to select the DVD mode. (The DVD indicator will light.)Using the BROWSER screen1Press TITLE MENU.The BROWSER screen will appear.2The MP3, WMA and JPEG files and folders stored in the disc aredisplayed on the BROWSER screen.• Select a folder and press ENTER. The files in the folder appear.When the file to be displayed is selectedYou can select the file types to be displayed on the BROWSER screen.1Press to select “SELECT FILES” and press ENTER.The following list will appear.popArtGrammy03_01.mp3Grammy03_02.mp3Grammy03_03.mp3Grammy03_04.mp3Grammy03_05.mp3Grammy03_06.mp3Grammy03_07.mp3Grammy03_08.mp3Toulouse-LautrecBROWSERENTERRETURNENTER BACKSETENDSELECTTITLEMENUMUSIC ONLY: Only the MP3 and WMA files appear.PICTURES ONLY: Only the JPEG files appear.ALL: All files and folders appear.2Select one item in the above list and press ENTER.The display will be changed to the selected display type.PLAYSELECT FILESBROWSERENTERRETURNENTER BACK ENDSELECTTITLEMENUMUSIC ONLYMUSIC ONLYPICTURES ONLYALLSETpopArtGrammy03_01.mp3Grammy03_02.mp3Grammy03_03.mp3Grammy03_04.mp3Grammy03_05.mp3Grammy03_06.mp3Grammy03_07.mp3Grammy03_08.mp3Toulouse-Lautrec 2G10101A P40-P46 2/10/05, 9:22 AM44
Disc playback45MP3/WMA/JPEG playbackMP3 CD• MP3 files must have the extensionletters “.mp3”.• Standard, sampling frequency, andthe bit rate:MPEG-1 Audio32kHz, 44.1kHz, 48kHz32kbps to 320kbps (constant bitrate or variable bit rate)• The recommend recording settingfor a high quality sound is 44.1kHzof sampling frequency and128kbps of constant bit rate.WMA CD• When creating a WMA disc, makesure that the copyright function isoff. DRM (Digital Rights Manage-ment) files cannot be played back.• WMA files must have the extensionletters “.wma”.• Standard, sampling frequency, andthe bit rate:WMA version 7 and 832kHz, 48kbps44.1kHz, 48kbps to 192kbps48kHz,128kbps to 192kbps• Music files recorded as mono,48kHz, 48kbps cannot be playedback by this unit.Playing back MP3/WMA files1Press or to select MP3 or WMA file.• In case the disc includes more than 10 files, you can turn to thenext or the previous page. (See page 42.)2Carry out either of the item a or b below.a: Press ENTER.b: Press to select “PLAY” and press ENTER.The TRACK INFO screen appears to playback the selected file.For the details of the TRACK INFO screen, see “Various opera-tions on CD” on page 42.Grammy03_02.mp3Grammy03_03.mp3Grammy03_04.mp3Grammy03_05.mp3Grammy03_06.mp3Grammy03_07.mp3Grammy03_08.mp3Grammy03_09.mp3Grammy03_10.mp3Grammy03_01.mp3BROWSERENTERRETURNENTER BACKSETENDSELECTTITLEMENUGrammy03_02.mp3Grammy03_03.mp3Grammy03_04.mp3Grammy03_05.mp3Grammy03_06.mp3Grammy03_07.mp3Grammy03_08.mp3Grammy03_09.mp3Grammy03_10.mp3Grammy03_01.mp3Grammy03_01.mp300:00:19MODE: NORMALREPEAT: OFFTRACK INFOENTERRETURNPLAY BACK ENDSELECT SETTITLEMENU3To return to the BROWSER screen, press RETURN.• To stop playback of the MP3 or WMA files, press TITLE MENU. 2G10101A P40-P46 2/10/05, 9:22 AM45
Disc palyback46MP3/WMA/JPEG playbackPlaying back JPEG files1Press or to select JPEG file.• In case the disc includes more than 10 files, you can turn to thenext or the previous page. (See page 42.)2Carry out either of the item a or b below.a: Press ENTER.b: Press to select “PLAY” and press ENTER.The thumbnail images of the JPEG files stored in the route direc-tory or the folder appear.Press , , or to select the pages of the thumbnail im-ages, or select the JPEG file to be displayed at first for the slideshow.3Press ENTER to play the selected picture.If you have set the interval time for JPEG slide show, the pictureswill be played back one after another automatically. (See page 32.)• Press ZOOM to enlarge the displayed image.• Press ANGLE to rotate the image by 90 degrees each time.Alone.jpgAmbassadeurs-Aristide_Bruant.jpArlstide Bruant.jpgAt_the_Moulin_Rouge.jpgClown Cha-U-Kao.jpgDancer Seated.jpgEI Dorado.jpgGalerie 65 Cannes.jpgJane Avril-1893.jpgAlfred Ia Guigne.jpg/popArtBROWSERENTERRETURNSELECT BACKSETENDSELECTTITLEMENUSaxophone.jpg Baseball.jpg Drive.jpgparty_240803.jpg practice_ski.jpg My_car.jpgENTERRETURNPLAY BACK ENDSELECT SELECTTITLEMENUJPEG CDJPEG files must have the extensionletters “.jpe”, “.jpeg” or “.jpg”.4To return to the thumbnail screen, press RETURN.• To stop the slide show, press TITLE MENU. 2G10101A P40-P46 2/10/05, 9:22 AM46
Disc playback47Progressive scanThe unit supports the progressivescanning system as well as the con-ventional interlaced scanning sys-tem. If your TV is equipped with com-ponent video input jacks which sup-port the progressive video input, youcan enjoy high quality picture bymaking the progressive scanningmode active.Preparation:•Connect to a TV equipped with component jacks which support theprogressive video input.•Turn ON the TV and set it to the corresponding video input mode.•Press DVD to select the DVD mode. (The DVD indicator will light.)1Press PROGRESSIVE in the stop mode. The PROGRESSIVE in-dicator “ ” on the display window will light.•The unit recognizes the picture source (film or video) of the cur-rent disc according to the disc information.2Press PLAY to start playback.NOTES:• Some discs may not be played back with the progressive scan mode correctly because of the disc characteris-tics or recording condition.• There are some progressive TV and High-Definition TV sets that are not fully compatible with the unit, resultingin an unnatural picture when playing back a DVD disc in the progressive scan mode. In such a case, use theinterlaced scanning mode.• You cannot activate the progressive scan mode in the following cases:- The unit is in the VCR mode.- A DVD disc is currently playing. You must stop playback first.•To make the progressive scanning mode inactive, press PRO-GRESSIVE in the stop mode. The PROGRESSIVE indicator“” on the display window will go off.Different scanning modesInterlaced scanTechnology that alternately displays odd-numbered scanning linesand even-numbered scanning lines. Also called “480i”, “i” meaning“interlace”.Progressive scanTechnology that simultaneously displays odd-numbered scanninglines and even-numbered scanning lines from top to bottom. Alsocalled “480p”, “p” meaning “progressive”.P 2G10101A P47-P54 2/10/05, 9:22 AM47
Tape playback48Tape speed and maximum recording timeLoading and unloading a cassette tapeUse only video cassette tapes marked and .• Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder However, S-VHS recordingis not possible with this model.• This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to playback S-VHSrecordings with regular VHS resolution.• HQ VHS is compatible with existing VHS equipment.Erase prevention tabVCRErase prevention tabScrewdriverVideo cassette tapeTape SpeedSLP (Super Long Play)T-160 T-120 T-90 T-60 T-302-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hoursSP (Standard Play)LoadingPush the center of the tape until it is automatically in-serted.Insert the cassette tape with its labeled side facing upand the erase prevention tab positioned at your left. Aninverted cassette tape cannot be inserted.Automatic power ONWhen you insert a cassette tape the VCR power will turn ON automatically.Automatic playbackWhen loading a cassette tape without an erase prevention tab, playback will start automatically.UnloadingYou can eject the video tape while the unit is turned off.1Press EJECT on the unit or the remote control. 2Remove the cassette tape.Automatic tape ejectThis VCR will automatically rewind the tape when the tape has ended. And when the tape is rewound to itsbeginning, the cassette tape will be ejected automatically.To prevent accidental erasureRemove the erase prevention tab with a screwdriver. To record againCover the hole with a piece of adhesive tape.PAdhesiveTape 2G10101A P47-P54 2/10/05, 9:22 AM48
Tape playback49Cassette tape playbackNOTES:• This VCR selects the playbacktape speed SP, LP or SLP auto-matically.• A cassette tape and DVD disc canbe played back simultaneously. Ifyou press VCR, the tape playbackand DVD playback alternate witheach other on the screen.Preparation:• Turn ON the TV and set to the video input mode.• Press VCR to select the VCR mode. (The VCR indicator will light.)1Load a prerecorded tape(When loading a cassette tapewithout the erase preventiontab, playback will start automatically).2To start playbackPress PLAY.Playback will start.“” will appear on the screen forabout 4 seconds.To stop playbackPress STOP once.The tape will stop but remain fullyloaded and ready to play.“ ” will appear on the screen for about4 seconds.To rewind the tape or forward it rapidlyPress STOP.To rewind the tape:Press REW.To forward the tape:Press F.FWD.To stop the tape-winding, press STOP. To switch to playback directly(without STOP), press PLAY.Forward/Reverse picture search modeWhen the tape is being winded, you can switch to picture search mode(see next page). To do this, press REW or F.FWD and hold it down. Theunit will resume the tape winding as soon as the button is released. 2G10101A P47-P54 2/10/05, 9:22 AM49
Tape playback50Special playbackPicture searchReverse picture search functionPress REW x 1 or x 2 during the playback.Forward picture search functionPress F.FWD x 1 or x 2 during the playback.To return to playback: Press PLAY.Still picturePress PAUSE during playback.To resume normal playback: Press PLAY or PAUSE.Slow motionDuring playback press SLOW.To return to playback: Press PLAY or SLOW.Slow tracking and vertical lock adjustmentIf noise bars appear in the picture during slow motion,press the TRK + or – to reduce the noise bars.If the still picture jitters excessively, press TRK + or – tostabilize the still picture.Frame by frame picturePress PAUSE during playback.Press SLOW one by one: The picture advances frameby frame.To return to playback: Press PLAY or PAUSE.Adjusting tracking conditionAutomatic tracking adjustmentWhenever you insert a tape and start playback, automatictracking starts working and continuously analyzes the signalto enable optimum picture quality during playback.Manual tracking adjustmentIf automatic tracking cannot eliminate noises well duringplayback, press TRK +/– to eliminate the noises.“MANUAL TR.” will appear. Press it briefly for a fine ad-justment, or press and hold for a coarse adjustment.• Press ATR to reactivate automatic tracking again.“AUTO TR.” will appear.NOTES:• The audio output is muted during SPEED SEARCH,STILL, FRAME ADVANCE and SLOW MOTION.• During picture search mode there will be noise barswhich are caused by the system.• The Special Playback will automatically change toplayback after approx. 5 minutes to protect the videotape against excessive wear.Repeat playbackThe entire video tape will be played until its end. Thetape will then automatically rewind to the beginning andthe playback will be repeated.1Press REPEAT while the VCR is playing back.2By pressing REPEATeach time, “REPEATON” or “REPEAT OFF”is selected in turn.3When “REPEAT ON” is selected, the tape is playedback to the end, and then, it is automatically re-wound to the starting point and played back again.The display “REPEAT ON” goes out in about 3 sec-onds.To cancel repeat playback: Press REPEAT to se-lect “REPEAT OFF”.Instant skipPress INSTANT SKIP during playback.The video is rapidly forwarded for approx. 30 secondsand playback resumes.You may press the button up to six times in a row tomove 180 seconds ahead.To display VCR operation statusPress DISPLAY. The clock, day of the week and moreinformation will be indicated.While watching TVWhile operating a tapeTo cancel the display: Press DISPLAY until all indi-cators disappear.REPEAT ONPICTURE SEARCH SPEEDPRESS TWICETAPE SPEED PRESS ONCESP (Standard Play)LP (Long Play)SLP (Super Long Play)5 X9 X15 X3 X7 X9 XSPEED SEARCH TIMESCH 1258:47AMMON00 : 00 : 00 SPSTEREO SAPDAY OF THE WEEKCHANNELCLOCKSTEREO ANDSECONDAUDIOPROGRAM (SAP)8:30AMMON00 : 15 : 12 SPHI-FIOPERATINGMODETAPE INAUTOREPEATHI-FI STEREOTAPE SPEEDREAL TIME COUNTER 2G10101A P47-P54 2/10/05, 9:22 AM50

Navigation menu