Ohsung Electronics URCZR2 ZR-2 Repeater User Manual
Ohsung Electronics Co., Ltd. ZR-2 Repeater
User Manual
FCC TEST REPORT Report No.: EMC-FCC-R0066 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. 275 ZR-2 REPEATER Introduction ZR-2 Repeater Owner’s Manual ©2012 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. URC - Control the Experience is a registered trademark of Universal RemoteControl, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations. ZR-2 REPEATER Thank you for purchasing the ZR-2 Repeater. The ZR-2 is used to extend the operational range between Total Control products that work on URC’s 2.4 GHz RF network, such as the TRC-780 and to the MRX Advanced System Controller. Once joined to an MRX, it wirelessly repeats communication between a Total Control remote and an MRX Advanced System Controller. The front and rear panel consists of: POWER LED STATUS LED DATA LED USB TEST Power LED: When illuminated this light indicates the ZR-2 is powered. Features and Benefits Wirelessly extend the range between TC 2.4 GHz products Additional ZR-2 Repeaters can be joined to extend the RF signal to every corner of the home, or small office. Compact size allows for easy installation Seamless integration with the Total Control System Status LED: The LED shows the RF signal strength between the ZR-2 and the MRX Advanced System Controller. Pressing the Test buttonon the rear of the unit refreshes the signal strength. When the LED is: OFF: There is no signal to communicate between Total Control products. Press the Test button to reconnect to the MRX Advanced System Controller. Orange: Poor signal strength. URC recommends relocatingthe unit for strong signal reception. Parts Guide Green: Receiving optimal signal strength. The ZR-2 Repeater includes: Data LED: The Data LED flashes as the ZR-2 Repeater transmitsdata. Test: Press to obtain the current signal strength status between the ZR-2 and the MRX Advanced System Controller. 1 - ZR-2 Repeater 1 - Owner’s Manual RF Frequency: 2405 ~ 2480 MHz(Two-way RF) Effective Range: Typically 50-75 ft, depending on environment Size: L x D x H = 2.559" x 0.984" x 1.968" Weight: 2 oz. Power Supply: 100 ~ 240V~, 50/60Hz, 0.3A USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. In the event of a defect, these are your exclusive remedies. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided "AS IS" unless expressly provided for in any enclosed software Limited Warranty. Page 2 70 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914)835-4484 FAX: (914) 835-4532 www.universalremote.com OCE-0133A Rev 01 USB: INSTALLER ONLY!! Used for updating the unit’s firmware. Page 1 55 ZR-2 REPEATER Specifications ZR-2 Front and Rear Panel Descriptions Page 3 ZR-2 REPEATER ZR-2 REPEATER To obtain warranty service, you must deliver the product, freight prepaid, in its original packaging or packaging affording adequate protection to Universal Remote Control at the address provided in the Owner's Manual. It is your responsibility to backup any macro programming, artwork, software or other materials that may have been programmed into your unit. It is likely that such data, software, or other materials will be lost during service and Universal Remote Control will not be responsible for any such damage or loss. A dated purchase receipt, Bill of Sale, Installation Contract or other verifiable Proof of Purchase is required. For product support and other important information visit Universal Remote Control's website: http://www.UniversalRemote.com or call the Customer Service Center (914) 835-4484. ZR-2 REPETER UPDATE NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTE CONTROLBE LIABLE, WHETHER IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THEFULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the Universal Remote Control product. This Limited Warranty does not cover Universal Remote Control products sold as USED, AS IS, REFURBISHED, so-called “B STOCK” or consumables(such as batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from the product. This Limited Warranty is valid only in the United States of America. This LimitedWarranty specifically excludes products sold by unauthorized resellers. LIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATEMENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusionsmay not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state or jurisdiction to jurisdiction. REV020708 Page 5 Page 6 ZR-2 REPEATER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. ZR-2 REPEATER Warning! Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCC Caution However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commission (FCC) Radiation Exposure Statement This remote device is approved as a hand-held and hand-operated only portable(relative to hand) device which is normally operated at 20 cm from a person’s body. Page 7 Page 8 ZR-2 Repeater Owner’s Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-702 Create Date : 2012:06:21 18:04:10+09:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2012:06:25 09:26:48+09:00 Metadata Date : 2012:06:25 09:26:48+09:00 Format : application/pdf Creator : n Producer : Microsoft® Word 2010 Document ID : uuid:b999f604-502d-435e-accc-7ac0cb3e591a Instance ID : uuid:a8b1f8d9-8a6c-48f1-914f-c5367afd7cd3 Has XFA : No Page Count : 3 Language : ko-KR Author : nEXIF Metadata provided by EXIF.tools