Olympus Medical Systems EC-1 Low Power Transmitter User Manual GT1629 FCC MAJ 1467 C1

Download:
Mirror Download [FCC.gov]
Document ID	618772
Application ID	WujQuKBbbE9JDnornXPEXg==
Document Description	Users manual Part 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	273.19kB (3414831 bits)
Date Submitted	2006-01-12 00:00:00
Date Available	2006-03-18 00:00:00
Creation Date	2006-01-12 17:15:46
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-01-12 17:16:14
Document Title	GT1629_FCC_MAJ-1467_C1.book
Document Creator	FrameMaker 7.0
Document Author:	10007563

Chapter 6 Capsule Endoscope Image Observation
Table 6.1
Overlap
One image is refreshed.
Sequential
All images displayed are refreshed.
Enlarging images
You can enlarge the image data displayed in the image display area of the main
screen.
1.
Click the [Zoom] button (see Figure 6.24). The image being displayed in the
image display area will be enlarged.
Zoom button
Figure 6.24
•
When you enlarge an image, the [Zoom] button is changed to
the original size mode (see Figure 6.25). Click the [Zoom]
button again to restore the image to its original size.
Enlargement mode
Original size mode
Figure 6.25
•
160
Magnification varies in the image view mode (see Table 6.2).
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Table 6.2
Image view mode
Magnification
1 Display mode
x2
2 Display mode
x 1.5
4 Display mode
− (not available)
Structure enhancement
Use the [Enhance] buttons to emphasize the patterns on the surface of the
mucosa (see Figure 6.26).
Enhance buttons
Figure 6.26
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
161
Chapter 6 Capsule Endoscope Image Observation
The structure enhancement level can be switched between
“Normal” and “High” (see Table 6.3).
Table 6.3
Enhancement level
Detail
Normal
The image is displayed without structure
enhancement applied.
High
The image is displayed with structure enhancement
applied.
Antenna display
The antenna display identifies the antenna with the best signal reception.
The antenna information is for reference only. Do not depend
on this information to determine the position of the capsule
endoscope.
1.
Click the [Antenna] button in the antenna display section (see Figure 6.27).
The antenna display panel is displayed.
Antenna button
Figure 6.27
Click the [Antenna] button again to hide the antenna display
panel.
162
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Creating thumbnails
Clicking the [Capture] button while the playback of image data is paused will
create and display thumbnails of the image data in the thumbnail view area (see
Figure 6.28).
To create thumbnails, double click on the image display area.
Capture button
Thumbnail view area
Figure 6.28
When you click the [Capture] button during the playback of
image data, a thumbnail will be created for the image being
displayed at that moment, and the playback of image data
will be paused.
Removing thumbnails
1.
On the thumbnail view area, select the thumbnail you wish to remove.
2.
Right-click on the selected thumbnail to display the context menu (see
Figure 6.29).
Figure 6.29
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
163
Chapter 6 Capsule Endoscope Image Observation
3.
Select “Remove” from the context menu to delete the selected thumbnail.
•
You can also press the “Delete” key on the keyboard to
delete the selected thumbnail.
•
If the thumbnail included in the reporting group is removed,
one of the below messages is displayed.
− The selected thumbnails are added to a report. If you
delete these thumbnails, they will be removed from a
report.
− If you delete the selected thumbnails, the comments
added to the group which contains these thumbnails will
be deleted.
•
If no thumbnail has been created, pressing the land mark will
create a new thumbnail.
Setting features
You can set a featured region on the time bar to identify the range of images
(small bowel area) to focus on.
1.
Click and select a thumbnail to set a feature.
2.
Click the [Landmarks] button on the thumbnail and select “Landmarks” from
the context menu (see Figure 6.30).
Landmarks button
Figure 6.30
164
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
3.
The feature setting screen is displayed (see Figure 6.31).
Figure 6.31
Table 6.4
4.
No marker
No marker is set for the images.
Starting point of
marker
Sets the selected thumbnail as the first image of the
marker area.
End point of
marker
Sets the selected thumbnail as the last image of the
marker area.
Origin for
relative time
Sets the selected thumbnail as the origin of a relative time
scale.
Select “No marker”, “Starting point of marker”, or “End point of marker” to set
the marker area. Also set the origin for the relative time.
•
Only one thumbnail can be used as the starting point of
marker, and as the end point of marker.
•
To set the selected thumbnail as origin of a relative time
scale, check the checkbox for “Relative time”.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
165
Chapter 6 Capsule Endoscope Image Observation
5.
Click the [OK] button. The feature interval is now set.
•
If you right-click on the thumbnail, the context menu which
contains the items in the Table 6.4 appears.
You can set features by selecting one of the context menu.
•
Click [Cancel] to discard the settings and exit the feature
setting screen.
•
The configured feature interval is shown in a different color
on the time bar.
•
When only the “Start of feature interval” is specified, the last
image of the data set becomes the “End of feature interval”.
•
When only the “End of feature interval” is specified, the first
image of the data set becomes the “Start of feature interval”.
Time bar
The time bar indicates the position of the currently displayed image relative to
the overall timeframe (see Figure 6.32).
Time bar
Figure 6.32
The thumbnails are connected with a line to a position on the time bar that
corresponds to the time at which they were captured.
166
•
When you drag the indicator on the time bar to the left or the
right, the image data being displayed in the image area is
updated accordingly.
•
The time bar becomes interrupted when the recorder unit is
turned OFF or when signals are not being received.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
•
When you click on the time bar, the indicator moves to the
clicked position, and the image area is updated to display the
corresponding image.
Red color detection bar
Figure 6.33
The red line on the red color detection bar indicates the position of red-color
detected image data.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
167
Chapter 6 Capsule Endoscope Image Observation
6.4
Generating reports
Preparing to generate a report
 Report preparation screen
6. Thumbnail view area
7. Image display area
5. Back button
4. Next button
8. Comment area
3. Change sequence button
9. User dictionary
2. Make group button
1. Group display area
Figure 6.34
1. Group display area
Displays images as groups.
2. Make group button
Groups images.
3. Change sequence button
Displays the group edit screen for changing the group ordering.
4. Next button
Displays the report generation screen.
5. Back button
Returns to the main screen.
6. Thumbnail view area
Displays thumbnails to be selected as members of a group.
7. Image display area
Displays thumbnails selected in the thumbnail view area or the group
display area.
8. Comment area
Allows attaching comments to a group.
168
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
9. User dictionary
Used when entering comments. As you type into the comment area, terms
starting with the characters you have entered will be searched for and
displayed.
 Grouping images
Only the images that have been assigned to a group can be included in a report.
You can associate a comment to each group.
1.
Click the [Report] button on the main screen (see Figure 6.35). The report
preparation screen is displayed.
Report button
Figure 6.35
2.
From the thumbnail view area, check the checkbox under the thumbnail you
wish to include in the reporting group (see Figure 6.36).
Thumbnail view area
Figure 6.36
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
169
Chapter 6 Capsule Endoscope Image Observation
To select multiple images, check the checkboxes under the
thumbnails (see Figure 6.37).
Checkbox
Figure 6.37
3.
Click the [Make group] button (see Figure 6.38). Selected images are
displayed in the group display area and a group is created.
Make group button
Figure 6.38
Images that are already grouped will be greyed out in the
thumbnail view area.
170
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
 Adding images to an existing group
To add images to an existing group, drag and drop the thumbnails from the
thumbnail view area onto the destination group.
1.
In the thumbnail view area, select the thumbnails you wish to add to the
group.
To select multiple images, check the checkboxes under the
thumbnails.
2.
Drag the selected thumbnails onto the destination group (see Figure 6.39).
The selected images are added to the group.
Figure 6.39
 Removing images from an existing group
To remove unwanted images from a group, drag and drop the thumbnails from
the group onto the thumbnail view area.
1.
In the group display area, select the thumbnails you wish to remove from the
group.
To select multiple images, check the checkboxes under the
thumbnails.
2.
Drag the selected thumbnails onto the thumbnail view area. The selected
images are removed from the group.
In the thumbnail view area, ungrouped images will no longer
be greyed out.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
171
Chapter 6 Capsule Endoscope Image Observation
 Moving images from one group to another
To move images from one group to another, drag and drop the thumbnails
between the groups.
1.
2.
In the thumbnail view area, select the thumbnails you wish to transfer.
•
To select multiple images, check the checkboxes under the
thumbnails.
•
You cannot select thumbnails from multiple groups.
Drag the selected thumbnails onto the destination group (see Figure 6.40).
The selected images are transferred.
Figure 6.40
172
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
 Drawing ovals on observation images
You can draw ovals on images to indicate areas of interest.
1.
Click the [Oval] button on the image display area (see Figure 6.41).
Oval button
Figure 6.41
The image display area displays the image for the thumbnail
selected in the thumbnail view area or the group display
area.
2.
Click & drag on the image in the image display area to draw an oval (see
Figure 6.42).
Figure 6.42
•
The oval will be centered around the point where the mouse
was clicked.
•
Release the mouse button to complete the oval.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
173
Chapter 6 Capsule Endoscope Image Observation
•
3.
An oval that extends beyond the limits of the image display
area will not be shown.
To undo the oval(s) you have drawn, click the [Undo] button.
To delete an oval, select the oval and press the [Delete] key
on the keyboard.
 Drawing arrows on observation images
You can draw arrows on images to point out areas of interest.
1.
Click the [Arrow] button on the image display area (see Figure 6.43).
Arrow button
Figure 6.43
The image display area displays the image for the thumbnail
selected in the thumbnail view area or the group display
area.
174
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
2.
Click and drag on the image in the image display area to draw an arrow (see
Figure 6.44).
Figure 6.44
3.
•
The arrow will be drawn from the point where the mouse was
clicked.
•
Release the mouse button to complete the arrow.
•
An arrow that extends beyond the limits of the image display
area will not be shown.
To undo the arrow(s) you have drawn, click the [Undo] button.
To delete an arrow, select the arrow and press the [Delete]
key on the keyboard.
 Entering comments
A comment can be attached to each group. Input your comment using the
keyboard or the user dictionary.
1.
On the report preparation screen, type in your comment into the comment
area.
2.
Words that start with the entered character string are displayed in the
candidate display area.
•
A candidate is displayed when a character is entered
following a space.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
175
Chapter 6 Capsule Endoscope Image Observation
•
3.
As you type into the comment area, terms starting with the
characters you have entered will be searched for and
displayed in the user dictionary area. To enter a term from the
dictionary, select the term and press the [Enter] key on the
keyboard.
Use the up/down arrow keys on the keyboard to select the word you wish to
enter from the candidate display area.
4.
Press the [Enter] key on the keyboard to enter the currently selected word
into the comment entry box.
•
You can also click on a word in the candidate display area to
enter it into the comment box.
•
To change the language when entering comments, right-click
on the comment area and select the language.
 Editing the user dictionary
Words that are frequently used in reports can be registered in the user dictionary.
1.
Click the [Edit] button on the report preparation screen. The user dictionary
edit screen is displayed.
2.
To add a word or phrase to the user dictionary, type the text into the text box
on the user dictionary edit screen, and click the [Add] button.
3.
To remove a word or phrase from the user dictionary, select a registered
word or phrase from the user dictionary, and click the [Remove] button.
Figure 6.45
176
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
 Sorting groups
1.
Click the [Change sequence] button on the report preparation screen (see
Figure 6.46). The group edit screen is displayed.
Change sequence button
Figure 6.46
2.
Select the group you wish to reorder.
3.
Drag and drop the selected group to achieve the desired ordering of groups
(see Figure 6.47). The groups are rearranged.
Figure 6.47
4.
Click the [OK] button. The change is applied, and the report preparation
screen will be displayed. Click the [Cancel] button to discard the changes
and return to the report preparation screen.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
177
Chapter 6 Capsule Endoscope Image Observation
Generating reports
 Report generation screen
5. Examination information
display area
6. Patient data
display area
7. “Display antenna”
checkbox
8. Individual information
checkbox
4. Referring
physician entry
box
9. Age checkbox
3. Reason for
referral entry
2. Findings/procedure
entry box
10. “Signature”
checkbox
1. Summary entry
box
11. “Facility logo”
checkbox
Figure 6.48
178
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
1. Summary entry box
Used to enter a summary.
2. Findings/procedure entry box
Used to enter findings and procedures.
3. Reason for referral entry box
Used to enter reasons for referral.
4. Referring physician entry box
Use to enter the name of the referring physician.
5. Examination information display area
Displays examination information that has already been set.
6. Patient data display area
Displays patient data that has already been entered.
7. “Display antenna” checkbox
Check to display antenna information on the report.
8. Individual information checkbox
Check to generate a report that does not contain information about the
individual.
To remove individual information (such as a facial portrait)
from the image data, you will need to set the hiding feature.
For more information, refer to “Hiding images” on page 216.
9. Age checkbox
Check to generate a report that does not include the patient’s age.
10. “Signature” checkbox
Check to generate a report with a signature block.
11. “Facility logo” checkbox
Check to display a facility logo on a report.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
179
Chapter 6 Capsule Endoscope Image Observation
 Displaying the report generation screen
1.
Click the [Next] button on the report preparation screen (see Figure 6.49).
The report generation screen is displayed.
Next button
Figure 6.49
2.
Contents specified on the initial setup screen are displayed (see Figure
6.50).
Figure 6.50
Only grouped images are displayed.
3.
180
Images grouped on the report preparation screen are displayed by group.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Displaying print previews
You can preview how the report will appear when printed.
1.
Click the [Preview] button on the report generation screen (see Figure 6.51).
The print preview of the report is displayed.
Preview button
Figure 6.51
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
181
Chapter 6 Capsule Endoscope Image Observation
 Print preview screen
5. Page number
6. Next Page button
7. Last Page button
4. Previous Page button
8. Zoom out button
3. First Page button
2. Print preview area
10. Zoom in button
1. Back button
11. Print button
Figure 6.52
182
9. Magnification
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
1. Back button
Returns to the report generation screen.
2. Print preview area
Displays the print preview.
3. First Page button
Displays the print preview for the first page.
4. Previous Page button
Displays the print preview for the previous page.
5. Page number
Shows the page number for the displayed page.
6. Next Page button
Displays the print preview for the next page.
7. Last Page button
Displays the print preview for the last page.
8. Zoom out button
Zooms out the print preview.
9. Magnification
Shows the magnification used to display the print preview.
10. Zoom in button
Zooms in the print preview.
11. Print button
Displays the print setup screen.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
183
Chapter 6 Capsule Endoscope Image Observation
 Printing reports
1.
Click the [Print] button on the report generation screen (see Figure 6.53) or
the print preview screen. The print setup screen is displayed.
Print button
Figure 6.53
You can also display the print setup screen by clicking the
[Print] button on the print preview screen.
2.
Click the [Print] button on the print setup screen (see Figure 6.54). The
report is printed.
Print button
Figure 6.54
184
•
By default, the reports are adjusted to print to letter size
paper.
•
You can select the paper size from letter the size or A4.
•
When A4 size is selected, the print size will be automatically
scaled to match the paper size.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Exporting reports
You can export the generated report in HTML format.
1.
Click the [Export] button on the report generation screen (see Figure 6.55).
The destination setting screen is displayed.
Export button
Figure 6.55
2.
Select the destination (see Figure 6.56).
Figure 6.56
•
When exporting a report from the workstation, you can only
export to external drives.
•
When exporting a report from the Endo Capsule software
light version of the PC, you can export to any drive.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
185
Chapter 6 Capsule Endoscope Image Observation
3.
Click the [OK] button (see Figure 6.57). The report is exported to the
selected destination.
OK button
Figure 6.57
•
The report is exported in HTML format.
•
The exported report can be viewed by any HTML browser.
Saving reports
You can save the generated report. The report can also be saved as a draft.
1.
Click the [Save] button on the report generation screen (see Figure 6.58).
The save screen is displayed.
Save button
Figure 6.58
186
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
2.
To finalize the report, click the [Finalize] button (see Figure 6.57). A report
file is generated in HTML format.
Finalize
Figure 6.59
•
To save the report as a draft, click the [Save draft] button (see
Figure 6.58). When the report is finalized, an HTML file of the
report is created and the report history is recorded. When the
report is saved as a draft, an HTML file of the report is not
created and the report history is not recorded.
Save draft button
Figure 6.60
•
Save the thumbnail data frequently to prevent possible data
loss due to a breakdown.
•
You can also save the thumbnail data by selecting “Save
thumbnail” from the “File” menu. In this case, an HTML file of
the report is not created and the report history is not
recorded.
Finalize the report before you write the report onto the DVD.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
187
Chapter 6 Capsule Endoscope Image Observation
Viewing the report history
You can view past reports by selecting them from the report history.
1.
Select “History” from the “Tools” menu on the report generation screen when
you open the examination data in the drive other than DVD. The history
screen is displayed.
Tools
Figure 6.61
Select ”History“ from the ”Tools“ menu on the main screen
when you open the examination data in the DVD (see Figure
6.61). The history screen is displayed.
2.
From the report history, select the report you wish to view, and click the
[Open] button (see Figure 6.62).
Open button
Figure 6.62
188
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
3.
The selected report is displayed on the report preview screen.
Click the [Cancel] button on the history screen to exit the
history screen.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
189
Chapter 6 Capsule Endoscope Image Observation
6.5
Examination data management
While writing to or reading from a USB memory, do not
remove the USB device from the port. It may damage
examination data and/or the USB device.
•
The “Examination Data Management” function is not
available in Endo Capsule Software Light.
•
Remove the USB devices from the workstation and restart
the workstation when it does not work properly. Then connect
the removed USB devices again.
•
The report file is exported to the following location.
(∗) Words in parentheses vary according to the exported
data.
190
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Examination list screen
10. Disk space information
3. Back button
2. Drive selection box
1. Examination list
4. Open button
5. Check in button
6. Check out button
9. DVD button
8. Copy button
7. Delete button
Figure 6.63
1. Examination list
Displays the list of examination data stored on the selected drive.
2. Drive selection box
Select the drive on which the examination data you wish to view is stored.
3. Back button
Returns to the main screen.
4. Open button
Opens the selected examination data.
5. Check in button
Checks in the selected examination data.
6. Check out button
Checks out the selected examination data.
7. Delete button
Deletes the examination data and the thumbnail data.
8. Copy button
Displays the examination data copy screen.
9. DVD button
Displays the DVD writing screen.
10. Disk space information
Displays the free space of the selected drive.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
191
Chapter 6 Capsule Endoscope Image Observation
Displaying the examination list screen
The following icons are displayed in the “Status” column of
the examination list.
Icon
192
Caption
Explanation
Original
The examination data which has been downloaded
from a recorder.
Imported
The examination data which is imported from a
external storage to the workstation.
With archive
The archived examination data in the workstation.
Checked out
The examination data in the workstation which has
been checked out.
Password protected
The examination data protected by a password.
Anonymous
The examination data from which the individual
information has been removed.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
1.
Click the [List] button on the main screen (see Figure 6.64). The
examination list screen is displayed.
List button
Figure 6.64
2.
To exit the examination list screen, click the [Back] button (see Figure 6.65).
Back button
Figure 6.65
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
193
Chapter 6 Capsule Endoscope Image Observation
Checking out the examination data
You can copy the examination data and thumbnail data from the workstation onto
an external drive, and edit the copied thumbnail data. You cannot edit thumbnail
data on the source workstation until the copied data is restored to the
workstation. This is referred to as the “check-out” function.
1.
From the examination list on the examination list screen, select the
examination data associated with the thumbnail data you wish to check out.
2.
Click the [Check Out] button (see Figure 6.66). The thumbnail data selection
screen is displayed.
Check out button
Figure 6.66
3.
From the thumbnail data list on the thumbnail data selection screen, select
the thumbnail data you want to check out (see Figure 6.67).
Figure 6.67
To create a new thumbnail data, select “New” (top row) from
the examination data list.
194
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
4.
Click the [OK] button (see Figure 6.68). The check-out destination selection
screen is displayed.
OK button
Figure 6.68
5.
Use the drive selection box to select the drive to which the data is checked
out and click the [OK] button. The examination data and the thumbnail data
are copied to the check-out destination (see Figure 6.69).
Drive selection box
Figure 6.69
The internal hard drive of the workstation cannot be selected.
Select an external drive.
•
Check the “Password” checkbox to set a password for the
check-out function.
•
If you specify a password when checking out the data, you
will be required to enter the password to open the thumbnail
data.
•
Click the [Cancel] button to exit the check-out destination
selection screen.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
195
Chapter 6 Capsule Endoscope Image Observation
•
If there is insufficient storage space on the selected
check-out destination, you can make free space by deleting
the unnecessary files.
•
While copying the data to the check-out destination, a
progress screen will be displayed. To stop the copying
process, click the [Cancel] button on the progress screen.
•
The examination data (∗∗∗.opg) and the thumbnail data
(∗∗∗.xml) is exported to the following location.
(∗) Words in parentheses vary according to the check out
data.
196
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Checking In the thumbnail data
Once you have finished editing the checked out thumbnail data, you must return
it to the source workstation. This is referred to as the “check-in” function.
1.
Select the checked out examination data and click the [Check in] button
(see Figure 6.70). The check-in source selection screen is displayed.
Check in button
Figure 6.70
2.
Use the drive selection box to select the drive that contains the checked out
thumbnail data which you wish to check in (see Figure 6.71).
Drive selection box
Figure 6.71
Only external drives can be selected.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
197
Chapter 6 Capsule Endoscope Image Observation
3.
Click the [OK] button (see Figure 6.72). The thumbnail data selection screen
is displayed.
OK button
Figure 6.72
4.
From the list of thumbnail data, select the thumbnail data you wish to check
in (see Figure 6.73).
Thumbnail data
Figure 6.73
198
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
5.
Click the [OK] button (see Figure 6.74). The thumbnail data being checked
in is saved, and the check-in process is complete.
OK button
Figure 6.74
If you select “New” from the list of thumbnail data when
checking out the data and do not make the thumbnail data on
Endo Capsule Software Light, you can not check in the
thumbnail data. To release a check-out, see “Releasing the
check-out” on page 200.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
199
Chapter 6 Capsule Endoscope Image Observation
Releasing the check-out
If the checked out thumbnail data cannot be checked in, perform the
following steps to release the check-out.
If you release a check-out, the checked out data cannot be
saved.
1.
Log in as an administrator.
2.
Click the [List] button on the main screen (see Figure 6.75). The
examination list screen will appear.
List button
Figure 6.75
3.
Select the checked out examination data (see Figure 6.76).
Examination data
Figure 6.76
200
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
4.
Right-click the examination data and select “Check out” from “Reset” in the
context menu (see Figure 6.77). The check-out is released.
Figure 6.77
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
201
Chapter 6 Capsule Endoscope Image Observation
Importing examination data from external drives onto the
workstation
You can import examination data from a DVD or an external drive (such as an
external hard disk) onto the workstation.
1.
Using the drive selection box on the examination list screen, select the
external drive that contains the examination data (see Figure 6.78).
Drive selection box
Figure 6.78
2.
From the examination list, select the examination data you wish to import
onto the workstation (see Figure 6.79).
Examination data
Figure 6.79
202
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
3.
Click the [Import] button (see Figure 6.80). The thumbnail data selection
screen is displayed.
Import button
Figure 6.80
4.
From the list of thumbnail data, select the thumbnail data you wish to import.
5.
Click the [OK] button (see Figure 6.81). The examination data and the
selected thumbnail data are imported onto the workstation.
OK button
Figure 6.81
•
If there is insufficient storage space on the internal hard drive
of the workstation, the error message will be displayed.
•
“Cannot import data because workstation does not have
sufficient disk space” message is displayed. Create enough
disk space to import data.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
203
Chapter 6 Capsule Endoscope Image Observation
Copying examination and thumbnail data
1.
Select the examination data you wish to copy and click the [Copy] button on
the examination list screen (see Figure 6.82). The copy screen is displayed.
Copy button
Figure 6.82
2.
•
You can select multiple examination data simultaneously.
The thumbnail data associated with the selected examination
data will be copied automatically.
•
To exit the copy screen, click the [Cancel] button.
Use the drive selection box to select the destination drive on the copy
screen (see Figure 6.83). The amount of available disk space on the
selected drive is displayed.
Drive selection
box
Figure 6.83
The folder for the examination data will be created
automatically during the copying process.
204
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
3.
The selected examination data which you wish to copy is displayed. (see
Figure 6.84).
Selected examination
data
Figure 6.84
4.
Click the [Option] button to display the data copy options screen (see Figure
6.85).
Option button
Figure 6.85
5.
Select the type of files to be copied together with the examination data. Click
the [Picture] button to copy still images, and the [Movie] button to copy video
files (see Figure 6.86).
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
205
Chapter 6 Capsule Endoscope Image Observation
Picture button
Movie button
Figure 6.86
All items are selected by default.
6.
Click the [OK] button to save the settings and exit the data copy options
screen (see Figure 6.87).
OK button
Figure 6.87
206
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
7.
Check the “Password” checkbox to set a password (see Figure 6.88).
Password
checkbox
Figure 6.88
If you specify a password when copying the examination
data, you will be required to enter the password to open the
copied examination data.
8.
Check the “Make anonymous” checkbox to copy the examination data with
the individual information removed (see Figure 6.89).
Make anonymous
checkbox
Figure 6.89
•
Individual information removed include “Patient name” and
“Image showing individual information”.
•
To remove “Image showing individual information”, you will
need to set the hiding feature. For more information, refer to
“Hiding images” on page 216.
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
207
Chapter 6 Capsule Endoscope Image Observation
9.
Click the [OK] button on the data copy screen (see Figure 6.90). The
selected examination data will be copied. The progress screen is displayed
while the examination data is being copied.
OK button
Figure 6.90
10.
•
To stop the copying process, click the [Cancel] button on the
progress screen.
•
If there is insufficient storage space on the copy destination,
an error message will be displayed. In this case, refer to
Chapter 8, “Troubleshooting” on page 233.
•
Do not remove an external storage device while copying.
Copying will fail and if may cause hang-up of the workstation.
When the copying of examination data is complete, you will be returned to
the examination list screen.
208
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
Chapter 6 Capsule Endoscope Image Observation
Deleting examination and thumbnail data
The examination data which has not been archived can not
be deleted.
1.
Select the examination data you wish to delete and click the [Delete] button
on the examination list screen (see Figure 6.91). The examination data
deletion screen is displayed (see Figure 6.91).
Delete button
Figure 6.91
2.
•
You can select multiple examination data simultaneously.
•
To exit the screen, click the [Cancel] button.
The selected examination(s) which you wish to delete is displayed (see
Figure 6.92).
Select
examination data
Figure 6.92
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
209

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 50
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:36842ea9-2eb5-404d-b1f8-e7fda72f5a72
Modify Date                     : 2006:01:12 17:16:14+09:00
Create Date                     : 2006:01:12 17:15:46+09:00
Metadata Date                   : 2006:01:12 17:16:14+09:00
Document ID                     : uuid:f275e13a-08ca-4f1f-840b-c48fa44a1734
Format                          : application/pdf
Title                           : GT1629_FCC_MAJ-1467_C1.book
Creator                         : FrameMaker 7.0
Author                          : 10007563
Producer                        : Acrobat Distiller 5.0.5 (Windows)

EXIF Metadata provided by EXIF.tools