Opticon Sensors Europe H32 H-32 User Manual H19CE Portable Terminal
Opticon Sensors Europe BV H-32 H19CE Portable Terminal
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2188319 |
| Application ID | ss7Qwq9KLVk3vETBVQFgGQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 69.53kB (869091 bits) |
| Date Submitted | 2014-02-11 00:00:00 |
| Date Available | 2014-02-18 00:00:00 |
| Creation Date | 2014-02-12 11:08:26 |
| Producing Software | Adobe PDF Library 10.0 |
| Document Lastmod | 2014-02-12 11:08:33 |
| Document Title | H19CE Portable Terminal |
| Document Creator | Acrobat PDFMaker 10.0 for Word |
| Document Author: | Kees Stoop;Rolien Faber;Martin Jansen |
Portable Terminal H - 32 The H-32 is a portable Windows CE terminal with a color display and a built-in laser scan engine (1D or 2D). Specifications Manual Opticon H - 32 Specifications Manual All information subject to change without notice. Document History Model Number: H-32 Specification Number: Edition: 1.08 Original Spec Number: Date: 2013-10-21 Copyright 2012 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 1217, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Europe Phone: 800-636-0090 Email: support@opticonusa.com Email: support@opticon.com Web: www.opticonusa.com Web: www.opticon.com Opticon H - 32 Specifications Manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 5 3.1. Dimensions ....................................................................................................................... 5 3.2. Weight ............................................................................................................................... 5 4. Environmental Specifications .................................................................................................. 6 4.1. Operating Temperature and Humidity ................................................................................ 6 4.2. Charging Temperature ...................................................................................................... 6 4.3. Storage Temperature and Humidity ................................................................................... 6 4.4. Ambient Light Immunity ..................................................................................................... 6 4.5. Static Electricity ................................................................................................................. 6 4.6. Drop resistance. ................................................................................................................ 6 4.7. Dust and Drip Proof ............................................................ Error! Bookmark not defined. 5. Controls..................................................................................................................................... 8 6. Electrical Specifications......................................................................................................... 10 6.1. Electrical Characteristics (Current measured at 3.7V operating voltage) ......................... 10 6.2. Main Battery .................................................................................................................... 10 6.3. Operating time ................................................................................................................. 10 7. Optical Specifications ............................................................................................................ 11 7.1. Laser Scan Specifications MDL2001 ............................................................................... 11 7.1.1. Tilt of Laser Scan Line ............................................................................................................. 11 7.1.2. Curvature of Scan .................................................................................................................... 11 7.2. Basic Optical Specifications MDI3100 ............................................................................. 12 7.2.1. Aiming pattern .......................................................................................................................... 12 8. Technical Specifications MDL2001........................................................................................ 14 8.1. Print Contrast Signal (PCS) ............................................................................................. 14 8.2. Minimum Resolution ........................................................................................................ 14 8.3. Supported symbologies: .................................................................................................. 14 8.4. Scan Area and Resolution ............................................................................................... 15 8.4.1. Depth of Field ........................................................................................................................... 15 8.5. Pitch, Skew, and Tilt ........................................................................................................ 16 8.6. Curvature ........................................................................................................................ 16 9. Technical Specifications MDI3100 ......................................................................................... 18 9.1. Print Contrast Signal (PCS) ............................................................................................. 18 9.2. Minimum Resolution ........................................................................................................ 18 Opticon H - 32 Specifications Manual 9.3. Wide Bar Code ................................................................................................................ 19 9.4. Motion Tolerance ............................................................................................................. 19 9.5. Barcode Test Sample ...................................................................................................... 20 9.6. Scan Area and depth of Field .......................................................................................... 21 9.7. Pitch, Skew, and Tilt ........................................................................................................ 22 9.8. Curvature ........................................................................................................................ 22 10. Labeling................................................................................................................................... 23 10.1. Product label ................................................................................................................... 23 10.2. White box label ................................................................................................................ 23 11. Packaging Specifications....................................................................................................... 24 11.1. Individual Packaging Specification................................................................................... 24 11.2. Collective Packaging Specification .................................................................................. 25 12. Regulatory Compliance .......................................................................................................... 26 12.1. Laser Safety .................................................................................................................... 26 12.2. EMC ................................................................................................................................ 26 12.3. RoHS .............................................................................................................................. 27 13. Safety....................................................................................................................................... 28 13.1. Shock .............................................................................................................................. 28 13.2. Temperature Conditions .................................................................................................. 28 13.3. Foreign Materials ............................................................................................................. 28 13.4. Battery ............................................................................................................................. 28 13.5. Other ............................................................................................................................... 28 14. Mechanical Drawing ............................................................................................................... 29 Table of Figures Figure 1: Scan tilt and curvature ............................................................................................... 11 Figure 2: Aiming Pattern MDI3100 ............................................................................................ 13 Figure 3: Depth of field MDL2001 ............................................................................................. 15 Figure 4: Pitch, skew, and tilt MDL2001 .................................................................................... 16 Figure 5: Curvature MDL2001 .................................................................................................. 17 Figure 6: Motion tolerance MDI3100 ......................................................................................... 19 Figure 7: Depth of field MDI3100 .............................................................................................. 21 Figure 8: Pitch, Skew, and Tilt MDI3100 ................................................................................... 22 Figure 9: Curvature MDI3100 ................................................................................................... 22 Figure 10: Product label ............................................................................................................ 23 Figure 11: Individual packaging................................................................................................. 24 Figure 12: Collective packaging ................................................................................................ 25 Figure13: Mechanical drawing .................................................................................................. 29 Opticon H - 32 Specifications Manual 1. Abstract This manual provides specifications for the H-32 portable terminal (hereafter referred to as “scanner”). 2. Overview The H-32 is a fully programmable portable Windows CE terminal with a built-in laser scan engine. Applications can be developed in C++/C# and all other languages supported by Windows CE and can be installed in the H-32’s internal flash memory. The H-32 also features a Micro SD memory expansion option on which e.g. a product database can be stored. The H-32’s also features an easy to use very rugged keyboard for data entry. For data communication, a WiFi (802.11 a/b/g/n/), Bluetooth V 2.1 + EDR and USB active sync interface is added. An application development kit, required to write, compile and install applications on the H-32 is available as a free download. This kit has to be used in combination with the standard Microsoft development tools (Visual Studio). The kit contains libraries for both C++ and .Net for easy access to the barcode scanner. 3. Physical Features 3.1. Dimensions W 62.3 x D 25.5 x H 146 mm (TBD) 3.2. Weight 195 g (including battery) (TBD) Opticon H - 32 Specifications Manual 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: -10 to 50° C Humidity: 20% to 80% RH 4.2. Charging Temperature Temperature: 0 to 40° C 4.3. Storage Temperature and Humidity Temperature: -20 to 60° C Humidity: 20% to 90% RH 4.4. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light 4,000 lx Fluorescent light 4,000 lx Sunlight 80,000 lx Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.9, Resolution = 0.25 mm, Quiet Zone = 15 mm, Symbology = 9-digit Code 39, N/W Ratio = 1:2.5 Distance 96 mm from the edge of the scanner Angle α = 0° β = 15° γ = 0° Curvature R=∞ Direct light or specular reflection from a light source should be prevented from entering the acceptance area. Note: α, β and γ respectively represent pitch, skew and tilt. Please see section 8 for how these values are defined. 4.5. Static Electricity Air discharge: ± 8 kV MAX (No malfunction) Contact discharge: ± 4 kV MAX (No malfunction) The criteria minimum performance level (or the permissible performance loss) is specified by the manufacturer, then either of these may be derived from the product description and documentation, and by what the user may reasonably expect from the H-32 if used as intended. Performance criterion A During and after the test the H-32 shall continue to operate as intended without operator intervention. No degradation of performance or loss of function is allowed below a minimum performance level specified by the manufacturer when the H-32 is used as intended. The performance level may be replaced by a permissible loss of performance. If the minimum performance level or the permissible performance loss is not specified by the manufacturer, then either of these may be derived from the product description and documentation, and by Opticon H - 32 Specifications Manual what the user may reasonably expect from the H-32 if used as intended. Performance criterion B During and after testing, a temporary loss of function is allowed, provided the function is self recoverable, or can be restored by the operation of the controls or cycling of the power to the H-32 by the user in accordance with the manufacturer’s instructions. If performance drop of USB Datalink occurs due to ESD please remove and re insert the USB connector. Performance criterion C During and after testing, Functions, and/or information stored in non-volatile memory, or protected by a battery backup, shall not be lost. After testing can be recovered to normal operation by reboot, are permissible by the user in accordance with the manufacturer’s instructions. 4.6. Drop resistance. There will be no sign of decreased performance after the following drop test: Drop the scanner from 1.5 M above the concrete floor (6 sides, 3 times each). Scratches or discoloration of the casing do not decrease product performance. Opticon H - 32 Specifications Manual 5. Controls Items Specifications Remarks Type AM3354 ARM Cortex A8 Internal ROM 176K Internal Boot ROM Internal RAM 64 KB Excluding cache memory Clock frequency 720 MHz Maximum ROM 256 MB NAND Flash RAM 256 MB Mobile DDR2 SD Card Micro SD card, HC support When booting, max 4GB Active area W 43.2 x H 57.6 mm 2.8 Inch Number of dots W 240 x H 320 QVGA Color depth 262144 Backlight White LED LED Two two-color LED (red/green) When lit at the same time, red and green appear as orange Speaker Mono, 700~20,000 Hz The speaker is used only for WM notifications and scan engine successful scan confirmation. The speaker is not intended to be used for audio playback files such as MP3. Vibrating motor Yes Microphone No Material Silicone rubber with protective coating Side keys Scan button on left side Scan button on right side Top key Power button Hold 8 seconds to reset terminal keys ESC, Fn, Alpha, Shift, Backspace (BS), Enter, 4 way navigation, scan, 10 numeric keys, * and a # key. See 5.1 Keyboard Built-in RTC YY/MM/DD/HH/MM/SS (Leap-year supported) Accurate within 90 seconds per month Battery backed up WiFi 802.11 a/b/g/n Summit, SD-SSD40NBT. 2.4GHz only Bluetooth 2.1 + EDR Summit, SD-SSD40NBT USB 2.0 Micro USB OTG CPU Memory LCD Indicators & Audio Keyboard Clock Communications Opticon H - 32 Specifications Manual 5.1. Keyboard Opticon H - 32 Specifications Manual 6. Electrical Specifications 6.1. Electrical Characteristics (Current measured at 3.7V operating voltage) Parameter Typ Unit Remarks Operating voltage 3.4–4.2 Lithium-ion battery Operating current 300 mA Backlight on, WLAN connected, 1 scan/minute Stand-by current <200 mA Not scanning, WiFi off, backlight on. <4 mA When the power is OFF Sleep current 6.2. Main Battery The main battery is a lithium-ion battery: • Nominal capacity: 1800 mAh (NP120) • Nominal voltage: 3.7 V. • Low voltage: Less than 3.4 V • Usable time: Approx 4 hours. • Data hold time (clock and SRAM): 2 hours The backup battery is an 15 mAh secondary battery. 6.3. Operating time Parameter Typ Unit Remarks Operating time Hours Backlight on, WLAN connected, 1 scan/minute Stand-by time Hours Not scanning, WiFi off, backlight on. Off time 11 Days When the power is OFF 10 Opticon H - 32 Specifications Manual 7. Optical Specifications 7.1. Laser Scan Specifications MDL2001 Parameter Light-emitting element Emission wavelength Light output Scanning method Scanning speed Scan angle ° Specification Red laser diode 650 ±10 (25° C) Light output 1.0 or less Bi-directional scanning 100 ±20 Scan angle: 54 ±5 Read angle: 44 (Min) Unit nm mW scans/s ° ° Notes: Refer to chapter 8, “Technical Specifications,” to read about scanning performance. 7.1.1. Tilt of Laser Scan Line Maximum tilt between both ends of laser scan line Less than 0.92° upward tilt from the scan origin. Maximum of 2.46 mm when measured at the point 150 mm away from the scan origin. (Measurement was done from the center of the scan line.) 7.1.2. Curvature of Scan Maximum gap between the straight line connecting both ends of the laser scan line and the actual laser scan line. Less than 1.17° curvature from the scan origin (from a mirror motor mirror). Maximum of 3.06 mm when measured at the point 150 mm away from scan origin. (Measurement was done from the center of the scan line.) Figure 1: Scan tilt and curvature 11 Opticon H - 32 Specifications Manual 7.2. Basic Optical Specifications MDI3100 Scan method Number of effective pixel Image capture speed (*1) Focal distance View angle Auxiliary light source ( LED × 2 ) Light source for aiming ( LED x 1) Item CMOS area sensor (black and white) (H) × (V) Frame rate Characteristics 752 × 480 dot 60 fps From the front edge of scan engine Horizontal Vertical Red LED 130 mm Approx. 40.6° Approx. 26.4° Peak Wave Length Directivity angle 2θ1/2 (*2) Maximum radiation output (*3) Green LED 617 nm 60° 15000 mcd Peak Wave Length Maximum radiation output (*4) 528 nm 18700 mcd *1 The fastest seed of image capture *2 The reference value extracted from the LED datasheet *3 *4 The reference value extracted from the datasheet (conditions: 25 °C, IF = 140 mA) 7.2.1. Aiming pattern The aiming is used for the following purpose: 1. Fill light to recognize the appropriate reading range. 2. Fill light when auto trigger is used. The aiming specifications are as follows: - An optical axis of imaging field of view and the center of horizontal aiming width coincide at a distance of L=110±20 mm from the front edge of the camera module. - The aiming horizontal width to the horizontal width of imaging filed of view at a distance of L=110 is 80%±10%. 12 Opticon H - 32 Specifications Manual Figure 2: Aiming Pattern MDI3100 13 Opticon H - 32 Specifications Manual 8. Technical Specifications MDL2001 The conditions are as follows, unless otherwise specified. Conditions Ambient temperature and humidity: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) Ambient light: 500 to 900 lx Background: Barcode = black Space = white Margin = white Background of label = black 3.3 V Power supply voltage Decoding test: Approve the performance when decoding is successful in all ten tests. (Decoding is deemed successful when completed in 0.5 seconds or less.) 8.1. Print Contrast Signal (PCS) PCS=0.45 or higher (over 70% of reflectivity of space and quiet zone). Scanning performance may decline if dirt or scratches mark the optical window. Keep the optical window clean. 8.2. Minimum Resolution 0.127 mm 8.3. Supported symbologies: Linear (1D) JAN/UPC/EAN, incl. add-on S-Code Codabar/NW-7 Telepen Code 11 Tri-Optic Code 39 UK/Plessey Code 93 Code 128 Postal codes (1D) GS1-128 (EAN-128) Chinese Post GS1 Databar (RSS) Korean Postal Authority Code IATA Industrial 2of5 2D codes Interleaved 2of5 GS1 Composite Codes ISBN-ISMN-ISSN MicroPDF417 Matrix 2of5 PDF417 MSI/Plessey 14 Opticon H - 32 Specifications Manual 8.4. Scan Area and Resolution 8.4.1. Depth of Field The depth of field is measured from the edge of the scanner. The scanning range is within the circular arc centered on the scan origin. Figure 3: Depth of field MDL2001 Conditions Barcode Sample: OPTOELECTRONICS Test Sample N/W Ratio: 1:2.5 Angle: α = 0°, β = 15°, γ = 0° Curvature: R=∞ Resolution (mm) Symbology PCS Quiet Zone Digits 1.0 Code 39 0.9 25 mm 0.5 Code 39 0.9 18 mm 0.25 Code 39 0.9 10 mm 0.15 Code 39 0.9 7 mm 10 0.127 Code 39 0.9 15 mm Opticon H - 32 Specifications Manual 8.5. Pitch, Skew, and Tilt Pitch angle: α = ±35° Skew angle: β = ±50° (Excluding dead zone) Dead zone: β = ±8° (There are some areas in which decoding fails due to specular reflection) Tilt Angle: γ = ±20° Figure 4: Pitch, skew, and tilt MDL2001 Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance Label Angle 110 mm from the exit window Pitch, Skew Angle, Dead Zone PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2.5 Tilt Angle PCS = 0.9, Resolution = 0.26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mm Curvature: R = ∞, Skew Angle = β +15° (for measuring Pitch Angle and Tilt Angle) 8.6. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R≥15 mm. With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R≥20 mm. 16 Opticon H - 32 Specifications Manual Figure 5: Curvature MDL2001 Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.9, Resolution = 0.26 mm, Quiet Zone = 10 mm Distance 110 mm from the edge of the exit window Angle Skew Angle β = +15° 17 Opticon H - 32 Specifications Manual 9. Technical Specifications MDI3100 Emit aiming light of the MDI-3100-SR to the center of a bar code for scanning. The conditions for technical specifications are as follows, unless otherwise specified in each section.Ambient Temperature and Humidity Ambient Light Pitch Angle Skew Angle Tilt Angle Curvature Power Supply Voltage PCS (1D and 2D) Scanning Test Bar Code Test Sample (1D and 2D) : Room temperature and room humidity : 100 ~200 lux (on the surface of a bar code) : α= 0° : β = 15° : γ = 0° :R=∞ : 3.3 and 5.0 V : 0.9 or higher : Accept the performance with 90% or more success rate for 10 tries of scan. One scan should be tested within 2 seconds : Specified below < Test chart > For 1D codes, OPTOELECTRONICS test samples For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for bar code 9.1. Print Contrast Signal (PCS) PSC 0.3 or higher MRD Distance Bar Code Sample : 32% and higher (70% or higher reflectivity of space and quiet zone) 130 mm from the front edge of the camera module : UPC specified in Chapter 8. (Resolution: 0.33 mm, PCS: 0.3) PCS = Reflectance of white bar－Reflectance of black bar Reflectance of white bar 9.2. Minimum Resolution 1D Code GS1-Databar Stacked Code 2D Code : 0.127 mm (5 mil) : 0.169 mm (6.7 mil) : 0.169 mm (6.7 mil) : 0.212 mm (8.4 mil) Code 39 specified in Chapter 8 GS1 Databar-Limited specified in Chapter 8 PDF417, GS1 Databar-Limited Composite specified in Chapter 8 OR Code and Data Matrix specified in Chapter 8 18 Opticon H - 32 Specifications Manual Bar Code Sample : The above codes specified in Chapter 8 Distance : 100 mm from the front edge of the camera module Angle : α = 0°, β =＋15°, γ = 0° Curvature :R=∞ For the pitch angle and tilt angle measurement, set the skew angle β = +15° 9.3. Wide Bar Code Code 39 with width of 100 mm and resolution of 0.2 mm can be read. Conditions> Bar Code Sample Distance Angle Curvature : 0.20 mm Code 39 specified in Chapter 8 : 160 mm from the front edge of the camera module : α = 0°, β =＋15°, γ = 0° :R=∞ 9.4. Motion Tolerance UPC bar code 100% can be read when it is moving at 2m/s. Ambient Temperature and Humidity Ambient Light Distance Angles Skew Tilt Curvature Power Supply Voltage PCS (1D and 2D) Bar Code Sample : Room temperature and Room humidity : 500 lux to 1000 lux (on the surface of a bar code) : 130 mm from the front edge of the camera module : α= 0° : β = 15° : γ = 0° :R=∞ : 3.3 and 5.0 V : 0.9 or higher : UPC with 0.33 mm resolution specified in Chapter Figure 6: Motion tolerance MDI3100 19 Opticon H - 32 Specifications Manual 9.5. Barcode Test Sample 20 Opticon H - 32 Specifications Manual 9.6. Scan Area and depth of Field The scan area is measured from the front edge of the camera module. Figure 7: Depth of field MDI3100 21 Opticon H - 32 Specifications Manual 9.7. Pitch, Skew, and Tilt Pitch Skew Tilt : α = ±50° : β = ±50° : γ = ±180° Bar Code Sample : 0.33 mm UPC specified in Chapter 8 Distance : 130 mm from the front edge of the camera module Curvature :R=∞ For the pitch angle and tilt angle measurement, set the skew angle β = +15° Figure 8: Pitch, Skew, and Tilt MDI3100 9.8. Curvature 0.33 mm 12-digit UPC : R ≧ 20 mm 0.15 mm 10-digit Codabar : R ≧ 16 mm Conditions> Bar Code Sample Distance Angle : 0.33 mm UPC specified in Chapter 8 : 110 mm from the front edge of the camera module : α = 0°, β =＋15°, γ = 0° Figure 9: Curvature MDI3100 Note: Scanning may fail due to the specular reflection of illumination LEDs when the reflectivity is high. 22 Opticon H - 32 Specifications Manual 10. Labeling 10.1. Product label The product label with the serial number as shown below is affixed to the scanner. Figure 10: Product labels The serial number consists out of 6 numeric digits. It starts with 000001 and is incremented with 1 for each scanner. The serial number is also stored in the scanners non volatile memory and API functions are available to retrieve the serial number for use in user applications. Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 50µm. 10.2. White box label Size TBD Label material: Paper, white, with permanent adhesive backing. Article number: Standard code 39 + human readable text , data = 12964 Serial number: Standard code 39 + human readable text, data should match that of the product inside the box. Model No. H-32-1D 23 Opticon H - 32 Specifications Manual 11. Packaging Specifications 11.1. Individual Packaging Specification TBD Figure 11: Individual packaging 24 Opticon H - 32 Specifications Manual 11.2. Collective Packaging Specification TBD Figure 12: Collective packaging Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union. 25 Opticon H - 32 Specifications Manual 12. Regulatory Compliance 12.1.Laser Safety (1D model) IEC 60825-1:2007 Laser Class 2 CDRH Laser Class 2 FDA CDRH Laser class II. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50 dated June 24, 2007. Class II laser devices are not considered to be hazardous when used for their intended purpose. Avoid staring into the laser beam. 12.2.EMC EN55022 EN55024 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. 26 Opticon H - 32 Specifications Manual FCC RF Radiation Exposure Statement: For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 5.0mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. 12.3. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 27 Opticon H - 32 Specifications Manual 13. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 13.1. Shock Do not throw or drop the scanner. Do not place heavy objects on the scanner. 13.2. Temperature Conditions Do not use the scanner at temperatures outside the specified range. Do not pour boiling water on the scanner. Do not throw the scanner into the fire. Do not leave the scanner on the dashboard of a car. 13.3. Foreign Materials Do not immerse the scanner in liquids. Do not subject the scanner to chemicals. 13.4. Battery Do not overcharge nor over discharge the battery. Do not charge the battery at freezing temperatures. Do not charge the battery at very high temperatures. When the scanner is not used for a very long time, remove the battery from the battery compartment. Replace the battery when its lifetime has expired. This is after two years of operation or 500 charge/discharge cycles. (When a half discharged battery is recharged, this counts as only half a cycle.) 13.5. WiFi 5GHz Operations in 5150-5250 MHz band is for indoor use only. 13.5. Other Do not disassemble this product. The scanner may be damaged by high voltage discharges. 28 Opticon H - 32 Specifications Manual 14. Mechanical Drawing TBD Figure13: Mechanical drawing 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Kees Stoop;Rolien Faber;Martin Jansen Create Date : 2014:02:12 11:08:26+01:00 Modify Date : 2014:02:12 11:08:33+01:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2014:02:12 11:08:33+01:00 Creator Tool : Acrobat PDFMaker 10.0 for Word Document ID : uuid:e50aa44c-6552-421a-9b62-2a9c19ce182b Instance ID : uuid:0baf8a4b-f394-461d-9003-a4677dfdebf7 Subject : 2 Format : application/pdf Title : H19CE Portable Terminal Creator : Kees Stoop;Rolien Faber;Martin Jansen Producer : Adobe PDF Library 10.0 Source Modified : D:20140212100803 Company : Microsoft Tag Doc Home : 2018936571 Tag New Review Cycle : Tag Ad Hoc Review Cycle ID : -2086610877 Tag Email Subject : NLV 1001 Technical Writing Tag Author Email : DOliver@opticonusa.com Tag Author Email Display Name : Donah Oliver Tag Reviewing Tools Shown Once : Page Layout : OneColumn Page Count : 29EXIF Metadata provided by EXIF.tools