OvisLink GW300R-NAS Wireless 2T2R 300Mbps Giga NAS Router User Manual 300R 3 of 3

OvisLink Corp. Wireless 2T2R 300Mbps Giga NAS Router 300R 3 of 3

300R user manual 3 of 3

3. Making ConfigurationAirLive GW-300R User’s Manual 673.3.5 Toolbox 3.3.5.1 View Log You can View system log by clicking the View Log button
3. Making ConfigurationAirLive GW-300R User’s Manual 683.3.5.2 Firmware Upgrade You can upgrade firmware by clicking Firmware Upgrade button. 3.3.5.3 Backup Setting You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 3.3.5.4 Reset to default You can also reset this product to factory default by clicking the Reset to default button.
3. Making ConfigurationAirLive GW-300R User’s Manual 693.3.5.5 Reboot You can also reboot this product by clicking the Reboot button. 3.3.5.6 Miscellaneous Items MAC Address for Wake-on-LAN Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of this device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately. Domain Name or IP Address for Test Allow you to configure an IP, and ping the device. You can ping a secific IP to test whether it is alive.
Appendices and Index AirLive GW-300R User’s Manual70Appendices and Index 802.1x Setting 1 Equipment Details Figure 1: Testing Environment (Use Windows 2000 Radius Server) PC1: Microsoft Windows XP Professional without Service Pack 1. AirLive WN-200USB Driver version: PC2:Microsoft Windows XP Professional with Service Pack 1a or latter. AirLive WN-200USB Driver version: 1.7.29.0 (Driver date: 10.20.2001) Authentication Server: Windows 2000 RADIUS server with Service Pack 3 and HotFix Q313664. Note. Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from HHHhttp://support.microsoft.com/default.aspx?scid=kb; en-us;313664UHH)
Appendices and Index AirLive GW-300R User’s Manual 712 DUT Configuration:Enable DHCP server. WAN setting: static IP address. LAN IP address: 192.168.1.254/24. Set RADIUS server IP. Set RADIUS server shared key. Configure WEP key and 802.1X setting. The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS, PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only) using the Smart Card or other Certificate of the Windows XP Professional. 3. DUT and Windows 2000 Radius Server Setup Setup Windows 2000 RADIUS Server We have to change authentication method to MD5_Challenge or using smart card or other certificate on RADIUS server according to the test condition. Setup DUT Enable the 802.1X (check the “Enable checkbox“). Enter the RADIUS server IP. Enter the shared key. (The key shared by the RADIUS server and DUT). We will change 802.1X encryption key length to fit the variable test condition. Setup Network adapter on PC 1.Choose the IEEE802.1X as the authentication method. (Fig 2) Note.Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade to service pack 1, then they can’t see MD5-Challenge from EAP type list any more, but they will get a new Protected EAP (PEAP) option. Choose MD5-Challenge or Smart Card or other Certificate as the EAP type.3.If choosing use smart card or the certificate as the EAP type, we select to use a certificate on this computer. (Fig 3)
Appendices and Index AirLive GW-300R User’s Manual 724. We will change EAP type to fit the variable test condition. Figure 2: Enable IEEE 802.1X access control Figure 3: Smart card or certificate properties 4. Windows 2000 RADIUS server Authentication testing: 4.1 DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) Download and install the certificate on PC1. (Fig 4) PC1 choose the SSID of DUT as the Access Point. Set authentication type of wireless client and RADIUS server both to EAP_TLS. Disable the wireless connection and enable again. The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC1. (Fig 5) Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. ( Fig 6)
Appendices and Index AirLive GW-300R User’s Manual 73Terminate the test steps when PC1 get dynamic IP and PING remote host successfully. Figure 4: Certificate information on PC1
Appendices and Index AirLive GW-300R User’s Manual 74Figure 5: Authenticating Figure 6: Authentication success 4.2 DUT authenticate PC2 using PEAP-TLS. PC2 choose the SSID of DUT as the Access Point. Set authentication type of wireless client and RADIUS server both to PEAP_TLS. Disable the wireless connection and enable again. The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC2. Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. Terminate the test steps when PC2 get dynamic IP and PING remote host successfully. Support Type: The router supports the types of 802.1x Authentication: PEAP-CHAPv2 and PEAP-TLS. Note.PC1 is on Windows XP platform without Service Pack 1. PC2 is on Windows XP platform with Service Pack 1a. PEAP is supported on Windows XP with Service Pack 1 only. Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is enable.
Appendices and Index AirLive GW-300R User’s Manual 75WPA Settings Wireless Router: LAN IP: 192.168.1.254 WAN IP: 192.168.122.216 Radius Server: 192.168.122.1 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: HHHUwww.funk.comUHHDownload: HHUhttp://www.funk.com/News&Events/ody_c_wpa_preview_pn.aspUOr Another Configuration:
Appendices and Index AirLive GW-300R User’s Manual 76WPA: For this function, we need the server to authenticate. This function is like 802.1x. The above is our environment: Method 1: 1. The UserA or UserB have to get certificate from Radius, first. HHUhttp://192.168.122.1/certsrvUaccount : fae1 passwd : fae1 2. Then, Install this certificate and finish. 3. Go to the Web manager of Wireless Router to configure, like below:
Appendices and Index AirLive GW-300R User’s Manual 774. Go to Odyssey Client Manager, choose “Profiles” and Setup Profile name as “1”
Appendices and Index AirLive GW-300R User’s Manual 78Login name and passwd are fae1 and fae1. Remember that you get certificate from Radius in Step1. 5. Then Choose “certificate” like above.
Appendices and Index AirLive GW-300R User’s Manual 796. Then go to Authentication and first Remove EAP/ TLS and Add EAP/TLS again.
Appendices and Index AirLive GW-300R User’s Manual 807. Go “Network” and Select “1” and ok
Appendices and Index AirLive GW-300R User’s Manual 818. Back to Connection and Select “123kk. If successfully, the wireless client has to authenticate with Radius Server, like below: 9.Result:
Appendices and Index AirLive GW-300R User’s Manual 82Method 2: 1. The UserA or UserB have to get certificate from Radius,first. HHUhttp://192.168.122.1/certsrvUaccount:fae1passwd:fae1 2. Then Install this certificate and finish. 3. Setting on the router and client: Router:
Appendices and Index AirLive GW-300R User’s Manual 83Client:Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: AdvancedÆ choose “123kk” Select “WirelessCA and Enable” in Trusted root certificate authority: Then, if the wireless client wants to associate, it has to request to authenticate.
FAQ and Troubleshooting AirLive GW-300R User’s Manual84FAQ and Troubleshooting What can I do when I have some trouble at the first time? 1. Why can I not configure the router even if the cable is plugged in the ports of Router and the led is also light?A: First, make sure that which port is plugged. If the cable is in the Wan port, please change to plug in Lan port 1 or Lan port 4: Then, please check if the Pc gets ip address from Router. Use command mode as below:
FAQ and TroubleshootingAirLive GW-300R User’s Manual 85If yes, please execute Browser, like Mozilla and key 192.168.1.254 in address. If not, please ipconfig /release, then ipconfig /renew. Whatever I setup, the pc can not get ip. Please check Status Led and refer to the Q2: 2.Why can I not connect the router even if the cable is plugged in Lan port and the led is light?A: First, please check Status Led. If the device is normal, the led will blink per second. If not, please check How blinking Status led shows. There are many abnormal symptoms as below: Status Led is bright or dark in work: The system hanged up .Suggest powering off and on the router. But this symptom often occurs, please reset to default or upgrade latest fw to try again. Status led flashes irregularly: Maybe the root cause is Flash rom and please press reset Button to reset to default or try to use Recovery mode.(Refer to Q3 and Q4) Status flashes very fast while powering on: Maybe the router is the recovery mode and please refer to Q4. 3.How to reset to factory default?A: Press Wireless on /off and WPS button simultaneously about 5 sec Status will start flashing about 5 times, remove the finger. The RESTORE process is completed.
FAQ and TroubleshootingAirLive GW-300R User’s Manual 864.Why can I not connect Internet even though the cables are plugged in Wan port and Lan port and the leds are blink. In addition, Status led is also normal and I can configure web management?A: Make sure that the network cable from DSL or Cable modem is plugged in Wan port of Router and that the network cable from Lan port of router is plugged in Ethernet adapter. Then, please check which wan type you use. If you are not sure, please call the isp. Then please go to this page to input the information isp is assigned. 5.When I use Static IP Address to roam Internet, I can access or ping global IP 202.93.91.218, But I can not access the site that inputs domain name, for example HHUhttp://espn.comUHH ?A: Please check the dns configuration of Static IP Address. Please refer to the information of ISP and assign one or two in dns item.
FAQ and TroubleshootingAirLive GW-300R User’s Manual 87How do I connect router by using wireless? 1.How to start to use wireless?A: First, make sure that you already installed wireless client device in your computer. Then check the Configuration of wireless router. The default is as below: About wireless client, you will see wireless icon: Then click and will see the ap list that wireless client can be accessed: If the client can not access your wireless router, please refresh network list again. However, I still can not fine the device which ssid is “default”, please refer to Q3.
FAQ and TroubleshootingAirLive GW-300R User’s Manual 88Choose the one that you will want to connect and Connect: If successfully, the computer will show and get ip from router:
FAQ and TroubleshootingAirLive GW-300R User’s Manual 892.When I use AES encryption of WPA-PSK to connect even if I input the correct pre-share key?A: First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: If SSID is default and click “Properties” to check if the driver of wireless client supports AES encryption.
FAQ and TroubleshootingAirLive GW-300R User’s Manual 903. When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and verify what the problem is.
܅פ෷ሽंᘿ୴ࢤሽᖲጥ෻ᙄऄʳรԼԲයʳীڤᎁᢞٽ௑հ܅פ෷୴᙮ሽᖲΔॺᆖ๺ױΔֆ׹Ε೸ᇆࢨࠌشृ݁լ൓ᖐ۞᧢ޓ᙮෷ΕףՕפ෷ࢨ᧢ޓ଺๻ૠհ௽ࢤ֗פ౨ΖรԼ؄යʳ܅פ෷୴᙮ሽᖲհࠌشլ൓ᐙ᥼ଆ౰ڜ٤֗եឫٽऄຏॾΙᆖ࿇෼ڶեឫ෼ွழΔᚨمܛೖشΔࠀޏ࿳۟ྤեឫழֱ൓ᤉᥛࠌشΖছႈٽऄຏॾΔਐࠉሽॾऄ๵ࡳ܂ᄐհྤᒵሽຏॾΖ܅פ෷୴᙮ሽᖲႊݴ࠹ٽऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭شሽंᘿ୴ࢤሽᖲ๻ໂհեឫΖʳုѾΚᐗ೸ڇנᐗழΔᄎܓشຌ᧯᠙ࡳ᙮ሐΔᨃึጤࠌشृʳʳྤऄٚრᙇᖗ᙮ሐΖုѿΚڼข঴᙮ሐᙇᖗΔ׽༼ࠎ˔̈̇̂Ε˄Ε˅ˁ˄˄࿛˄˄ଡ᙮ሐΖʳ

Navigation menu