PARTRON PSB100 Bluetooth Headset User Manual

PARTRON CO., LTD Bluetooth Headset

User Manual

Package ContentsPackage ContentsInstallation of Cable ClipPrecautions Product Warranty and Service Guide for the Paid ServiceProduct WarrantyUsing the Headset1. Power On / Off 3. Battery Status Alarm & Alert4. Low Battery Alarm & Alert5. Critical Battery2. Charging6. Pairing7. Calling8. Call Answer / Call End / Call Reject9. Transferring a Call10. Setting Waiting Mode while Calling11. Volume Control12. Music14. Multi-Connection15. Auto Reconnect16. Using Croise.R Reader Application17. Button function and status information17. Button function and status informationProduct Specifications and featuresPSB-100 Headset Features Cable ClipPackage ContentsDescription of PartsInstallation of Cable ClipProduct Specifications and FeaturesHow to usePower on/offChargingPairingCallingTransferring a CallVolume ControlMusic PlayMulti-ConnectionUsing Croise.R Reader Application Button Functions and Status Information Precautions Product Warranty and Service Limited WarrantyProduct Warranty CertificatePSB-100 User Manual1. Model Name : Neck Band Bluetooth Headset2. Part Number : PSB-1003. Manufacturer : PARTRON Co., Ltd.4. Country of Origin : Republic of Korea5. Address : 22, Samsung 1-ro 2-gil, Hwaseong, Gyeonggi 445-170, Korea- Please take the time to follow the instructions in this owner’s guide carefully.- Appearance and specifications of this product are subject to change without prior notice for product improvement.This device must accept any interference received, including interference that may cause undesired operation.Earbud Covers(Large/Small)USB ChargerUser ManualPlacing cable clip to the earphone cable.Power OnRecommendationsLED indicatorVoice DialingLast Number DialingCall Answer/Call EndCall RejectSetting Waiting modeVolume UpVolume DownMuteTo Play/Pause a MusicPrevious TrackNext TrackPairingCallingListening Music RewindMusic StopIncoming second call while calling※ Manual PairingPower OffClearing Paired DevicePut the clip into the earphone cable firmly.- Place the power slide switch to ‘ ’- The red + blue LED light flashes for 0.5 second and Power is turned on with voice guide.- Using USB Hub may take extra charging time due to the low current. For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger.- Press Call and Play/Pause button at the same time for a second for audio guidance for the current battery level.- The red LED light flashes 3 times with voice guidance “Battery not enough” if the battery is less than 1 hour use. - The notice continues every 2 minutes if the battery is less than 10 minutes use and power is turned off with voice guidance “Battery Empty” at the critical battery.“Battery Full” “Battery Half” “Battery not enough”- Place the power slide switch to ‘ ’- The red + blue LED light flashes for 0.5 second and Power is turned off with voice guide.- When the charger is connected, the Red LED is on.- When charging is completed, the Blue LED is on.- Hold Call button for 2 second while placing power slide switch to ON then it will enter to Pairing mode with voice guide “Start pairing”. And Register the PSB-100 in above same way. - Hold call button for 1 second and Volume button while placing power slide switch to ON then paired device will be cleared with voice guide “ Clear Paired List” and enter to Pairing Mode.- Briefly press Call button to activate Voice Dial.- Press Call button for 1 second, the mobile phone will call the last number dialed.- Briefly press Call button to answer the incoming call.- Briefly press Call button to end the call.- During the call, press Call button for 3 second, audio will be transferred from headset to mobile phone. - And press Call button for 3 second again, audio will be transferred from mobile phone to headset.- While calling or listening the music, briefly press Volume ‘+’ button.- While calling or listening the music, press and hold Volume ‘+’ button for continuous volume up.- While calling or listening the music, briefly press Volume ‘-’ button.- While calling or listening the music, press and hold Volume ‘-’ button for continuous volume down.- During the call, press Volume ‘+’, ‘-‘ button at the same time for mute.- Press Volume ‘+’, ‘-‘ button at the same time again to cancel the mute.- Proceed pairing of the first device manually. - Power off the headset upon registration of the first device is completed. - Power on holding the call button for pairing mode. - Pairing 2nd device for registration.- Connecting 1st device to the headset. - Ring tone sounds when the second device has incoming call while you are talking through first device.- You can operate the same as "Setting Waiting Mode while Calling".- In multi-pairing mode, key control is available for the first played device. - Press Play/Pause button briefly to stop playback from the first device. Then key control is available for 2nd Device.- To play a song or pause playback, press ‘Play/Pause’ button. - Press ‘Play / Pause’ button for 1second. - During the call, briefly press Call button twice and enter to call waiting mode. Pressing Call button twice again back to the call mode.- Briefly press Call button to end the original call and answer the second call.- Briefly press Call button twice to answer the second call without hanging up the original call (Original call will be call waiting mode)Ending a Call- Briefly press Call button.- Press ‘Previous Track’ button to select previous song.- Press ‘Next track’ button to select next song.Multi-connection is useful to link more than a mobile device. - Press and hold ‘Previous Track’ button.Fast ForwardAutomatic connection when headset is turned onOut Of RangeYou can use the additional functions through “Croise.R Reader” such as Manner mode, Volume Default Setting, Message Reading and so on.- Press and hold ‘Next track’ button.- If it kept the information of previously paired device, it will be automatically connected when headset is turned on. FunctionPower On Red and Blue LED will be on simultaneously for 0.5 sec and out. Power onRed and Blue LED will be on simultaneously for 0.5 sec and out. Power off8 levels of Volume8 levels of VolumeBlue LED lights flashes slowlyBlue LED light flashesBlue LED light flashes twice in every 5 secRed LED light flashes once in every 3 secReceiving a callStandbyDisconnectionDialing a callDuring the callPower OffVolume Up Briefly press Briefly press * Press long for continuous volume up* Press long for continuous volume downVolume DownAnswer CallReject CallCall CancelMuteTransferring a callCall Waiting Voice DialConnection to Mobile PhonePlay / PausePlay / PausePlay / PausePlay / PausePlay / PausePlay / PausePlay / PausePlay / PauseConnect the cable for the recharge Red LED is on Blue LED is onLED light flashes when charger cable is removed (Power off)Red, Blue LED lights flash in turnBattery Status NoticeDangerInsufficientNormalSufficientRed, Blue LED flash "Battery Empty."Red LED flickers 3 times quickly "Battery not enough"Red LED flickers 3 times quickly “Batter Half”“Battery Full”ConnectedDisconnectedLink LossPairingConnection information deleteConnectedDisconnectedOut of RangeStart paringClear Paired ListBattery Status checkPairing Mode Last Number RedialAction Status- If a connected device is more than 10m away from the device, voice guides "Disconnected" with the vibration. - The notice continues every 30 seconds for three minutes and it automatically connects if the device is placed in a connection range. - To use this application, you can search “Croise” or “Partron” in the Google Play Store to install.• Do not disassemble or modify. It may cause fire and disorder. • Do not use or place the product at high or low temperature. • Do not place the product near the high humidity, volatile, or flammables.• Please be cautious not to shock on the product. • It might give negative effect on the ear hearing if used for a long time in high volume. • This bluetooth device might be damaged if either over 1A/1000mA of charger or the defective charger is used.• In the case using car charger, the high output from truck may affect to the device. Also please have the device disconnected from the cigar jack charger which may affect to the device when starting the car engine.•The warranty is valid only if the original receipt issued to the original purchaser by the dealer.•If the product label is removed, physical change of the product or unapproved repair by the 3rd person, will invalidate of the warranty.•The consumables, such as ear cap, battery and other accessories, which have limited life, will be excluded from the product warranty.•This Warranty do not cover for the damage and accident by the misuse. •This Warranty do not cover the lost and damage of the product on either transportation or delivery. • This device passed strict quality management and inspection process. • Warranty period is 1 year. • Even in the warranty period, you can be charged for the paid service if needed.• Product dimension and outer appearance might be changed for the quality improvement without advance notice.• This device cannot be used for the human rescue related service as it have the interference.• After Product Warranty Period (1 year/6 months for the battery)• User's negligence or any failure from improper disassemble, repair and modification.• Failure caused by acts of God such as fire and flood.• Failure using other options which is not provided from Partron.• This Warranty does not cover product failures due to improper repair installations, modifications or service performed by a non-authorized person.• Any Consumable parts.- Briefly press Call button to reject the incoming call.※ To use Voice Dialing, your mobile phone must support Voice Dialing.- If PIN code is required, please input “0000”.- Slide the power switch up to the ‘ ’.- After power on, the headset will automatically enter to pairing mode. (The red/blue LED light flashes).- The headset will automatically enter to waiting mode if it is not connected for 3 minutes. (The power is automatically after 50 minutes with waiting mode)- On the device you want to have paired, find the Bluetooth menu and search & select “PSB-100” from the list of devices.- If connected without any problem, the headset will be paired with audio guide “Connected”- Once pairing is complete, it will be paired automatically afterwards.Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device.* Pairing: Connect between Bluetooth-enabled Device and Headset.Have the clip fixed into the neck band.Standby TimeOperating Time(Music)Operating Time(Talk)Charging TimeBatteryWorking Distance400 hours12 hours12 hours2 hoursLithium Polymer Battery 3.7V (195mAh)10mSupported profilesDecoderBluetooth Version※ The components of above package are subject to change without notice to improve the product performance or quality.※ The components of above package are subject to change without notice to improve the product performance or quality.※ When the charger is connected, the headset will be disconnected from the device. ※ To use Call waiting mode, the mobile phone must support ‘Call waiting’ service.16. Using Croise.R Reader ApplicationYou can use the additional functions through “Croise.R Reader” such as Manner mode, Volume Default Setting, Message Reading and so on.- To use this application, you can search “Croise” or “Partron” in the Google Play Store to install.※ Support Android Ver. 4.30※ User can hear the long beep at maximum and minimum volume.※ If it failed automatic connection, briefly press Call button once to connect. ※ Support Android Ver. 4.30※ It takes approximately 2 hours to have it fully charged when battery exhausted※ The power turns off when USB charger is disconnected.※ Above operating time subject to change based upon connected devices or the surrounding environment.PSB-100Volume UpVolume DownCallingOn/OffUSB Charging PortMicrophonePlay/PausePrevious Track/REWNext Track/FFBriefly press Briefly press during the callPress for 1 sec Press for 3 secondsPress quickly twice during the callBriefly press on standby status Press simultaneously during the call Briefly press on connection standby status Press for 1 sec during standby status Press and for 1sec simultaneouslyPress and simultaneously locate Briefly press Press for 1 secBriefly pressBriefly pressPress and hold Press and hold Function Action Status Function Action StatusThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Compliance Information

Navigation menu