User Manual
1. Model Name : Neck Band Bluetooth Headset 2. Part Number : PSB-100 3. Manufacturer : PARTRON Co., Ltd. 4. Country of Origin : Republic of Korea 5. Address : 22, Samsung 1-ro 2-gil, Hwaseong, Gyeonggi 445-170, Korea - Please take the time to follow the instructions in this owner’s guide carefully. - Appearance and specifications of this product are subject to change without prior notice for product improvement. This device must accept any interference received, including interference that may cause undesired operation. Package Contents PSB-100 User Manual Package Contents Description of Parts Installation of Cable Clip Product Specifications and Features How to use Power on/off Charging Pairing Calling Transferring a Call Volume Control Music Play Multi-Connection Using Croise.R Reader Application Button Functions and Status Information Precautions Product Warranty and Service Limited Warranty Product Warranty Certificate Package Contents PSB-100 Headset Features Cable Clip Earbud Covers(Large/Small) Next Track/FF Volume Up Volume Down USB Charger Previous Track/REW Calling Play/Pause On/Off PSB-100 User Manual USB Charging Port Microphone ※ The components of above package are subject to change without notice to improve the product performance or quality. Product Specifications and features Installation of Cable Clip Standby Time 400 hours Operating Time(Music) 12 hours Operating Time(Talk) 12 hours Charging Time 2 hours Battery Lithium Polymer Battery 3.7V (195mAh) Working Distance 10m Supported profiles Decoder Placing cable clip to the earphone cable. Put the clip into the earphone cable firmly. Have the clip fixed into the neck band. Bluetooth Version ※ Above operating time subject to change based upon connected devices or the surrounding environment. ※ The components of above package are subject to change without notice to improve the product performance or quality. Recommendations Using the Headset - Using USB Hub may take extra charging time due to the low current. For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger. ※ It takes approximately 2 hours to have it fully charged when battery exhausted 1. Power On / Off 3. Battery Status Alarm & Alert Power On - Place the power slide switch to ‘ ’ - The red + blue LED light flashes for 0.5 second and Power is turned on with voice guide. Power Off - Place the power slide switch to ‘ ’ - The red + blue LED light flashes for 0.5 second and Power is turned off with voice guide. 2. Charging - Press Call and Play/Pause button at the same time for a second for audio guidance for the current battery level. “Battery Full” “Battery Half” “Battery not enough” 4. Low Battery Alarm & Alert - The red LED light flashes 3 times with voice guidance “Battery not enough” if the battery is less than 1 hour use. LED indicator - When the charger is connected, the Red LED is on. - When charging is completed, the Blue LED is on. 5. Critical Battery ※ When the charger is connected, the headset will be disconnected from the device. ※ The power turns off when USB charger is disconnected. - The notice continues every 2 minutes if the battery is less than 10 minutes use and power is turned off with voice guidance “Battery Empty” at the critical battery. Clearing Paired Device 6. Pairing Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device. * Pairing: Connect between Bluetooth-enabled Device and Headset. - Slide the power switch up to the ‘ ’. - After power on, the headset will automatically enter to pairing mode. (The red/blue LED light flashes). - The headset will automatically enter to waiting mode if it is not connected for 3 minutes. (The power is automatically after 50 minutes with waiting mode) - On the device you want to have paired, find the Bluetooth menu and search & select “PSB-100” from the list of devices. - If connected without any problem, the headset will be paired with audio guide “Connected” - Once pairing is complete, it will be paired automatically afterwards. - Hold call button for 1 second and Volume button while placing power slide switch to ON then paired device will be cleared with voice guide “ Clear Paired List” and enter to Pairing Mode. 7. Calling Voice Dialing - Briefly press Call button to activate Voice Dial. ※ To use Voice Dialing, your mobile phone must support Voice Dialing. Last Number Dialing - Press Call button for 1 second, the mobile phone will call the last number dialed. 8. Call Answer / Call End / Call Reject Call Answer/Call End ※ Manual Pairing - Hold Call button for 2 second while placing power slide switch to ON then it will enter to Pairing mode with voice guide “Start pairing”. And Register the PSB-100 in above same way. - If PIN code is required, please input “0000”. - Briefly press Call - Briefly press Call button to answer the incoming call. button to end the call. Call Reject - Briefly press Call button to reject the incoming call. 11. Volume Control 9. Transferring a Call - During the call, press Call button for 3 second, audio will be transferred from headset to mobile phone. - And press Call button for 3 second again, audio will be transferred from mobile phone to headset. Volume Up - While calling or listening the music, briefly press Volume ‘+’ button. - While calling or listening the music, press and hold Volume ‘+’ button for continuous volume up. Volume Down - While calling or listening the music, briefly press Volume ‘-’ button. - While calling or listening the music, press and hold Volume ‘-’ button for continuous volume down. 10. Setting Waiting Mode while Calling Setting Waiting mode - During the call, briefly press Call button twice and enter to call waiting mode. Pressing Call button twice again back to the call mode. ※ To use Call waiting mode, the mobile phone must support ‘Call waiting’ service. Incoming second call while calling - Briefly press Call button to end the original call and answer the second call. - Briefly press Call button twice to answer the second call without hanging up the original call (Original call will be call waiting mode) Mute - During the call, press Volume ‘+’, ‘-‘ button at the same time for mute. - Press Volume ‘+’, ‘-‘ button at the same time again to cancel the mute. ※ User can hear the long beep at maximum and minimum volume. 12. Music To Play/Pause a Music - To play a song or pause playback, press ‘Play/Pause’ button. Ending a Call - Briefly press Call Music Stop button. - Press ‘Play / Pause’ Previous Track button for 1second. 14. Multi-Connection - Press ‘Previous Track’ button to select previous song. Multi-connection is useful to link more than a mobile device. Next Track - Press ‘Next track’ button to select next song. Pairing Rewind - Press and hold ‘Previous Track’ - Proceed pairing of the first device manually. - Power off the headset upon registration of the first device is completed. - Power on holding the call button for pairing mode. - Pairing 2nd device for registration. - Connecting 1st device to the headset. button. Fast Forward - Press and hold ‘Next track’ button. Calling 16. Using Croise.R Reader Application You can use the additional functions through “Croise.R Reader” such as Manner mode, Volume Default Setting, Message Reading and so on. - To use this application, you can search “Croise” or “Partron” in the Google Play Store to install. ※ Support Android Ver. 4.30 15. Auto Reconnect - Ring tone sounds when the second device has incoming call while you are talking through first device. - You can operate the same as "Setting Waiting Mode while Calling". Listening Music - In multi-pairing mode, key control is available for the first played device. - Press Play/Pause button briefly to stop playback from the first device. Then key control is available for 2nd Device. 17. Button function and status information Function Automatic connection when headset is turned on - If it kept the information of previously paired device, it will be automatically connected when headset is turned on. ※ If it failed automatic connection, briefly press Call button once to connect. Out Of Range - If a connected device is more than 10m away from the device, voice guides "Disconnected" with the vibration. - The notice continues every 30 seconds for three minutes and it automatically connects if the device is placed in a connection range. Action Power On Power Off Red and Blue LED will be on simultaneously for 0.5 sec and out. Power off Volume Up Volume Down Briefly press Briefly press * Press long for continuous volume down Briefly press Answer Call Call Cancel You can use the additional functions through “Croise.R Reader” such as Manner mode, Volume Default Setting, Message Reading and so on. Mute Transferring a call - To use this application, you can search “Croise” or “Partron” in the Google Play Store to install. ※ Support Android Ver. 4.30 Call Waiting Voice Dial 8 levels of Volume * Press long for continuous volume up Reject Call 16. Using Croise.R Reader Application Status Red and Blue LED will be on simultaneously for 0.5 sec and out. Power on Press 8 levels of Volume for 1 sec Briefly press Receiving a call during the call Press simultaneously during the call Press for 3 seconds Press quickly twice during the call Briefly press Dialing a call Blue LED lights flashes slowly During the call Blue LED light flashes twice in every 5 sec Standby Red LED light flashes once in every 3 sec Disconnection Blue LED light flashes on standby status 17. Button function and status information Function Action Connection to Mobile Phone Briefly press on connection standby status Last Number Redial Press for 1 sec during standby status Pairing Mode Battery Status check Press and simultaneously locate Press and for 1sec simultaneously Status Function Action Play / Pause Press Red, Blue LED lights flash in turn for 1 sec Briefly press Play / Pause Play / Pause Briefly press Play / Pause Press and hold Connected Connected Disconnected Disconnected Play / Pause Link Loss Out of Range Play / Pause Pairing Start paring Connection information delete Clear Paired List Press and hold Connect the cable for the recharge Play / Pause Insufficient Normal Sufficient Red LED is on Blue LED is on LED light flashes when charger cable is removed (Power off) Battery Status Notice Danger Status Briefly press Play / Pause Red, Blue LED flash "Battery Empty." Red LED flickers 3 times quickly "Battery not enough" Red LED flickers 3 times quickly “Batter Half” “Battery Full” Precautions Product Warranty and Service • Do not disassemble or modify. It may cause fire and disorder. • This device passed strict quality management and inspection process. • Do not use or place the product at high or low temperature. • Warranty period is 1 year. • Do not place the product near the high humidity, volatile, or flammables. • Even in the warranty period, you can be charged for the paid service if needed. • Please be cautious not to shock on the product. • Product dimension and outer appearance might be changed for the quality improvement • It might give negative effect on the ear hearing if used for a long time in high volume. • This bluetooth device might be damaged if either over 1A/1000mA of charger or the without advance notice. • This device cannot be used for the human rescue related service as it have the interference. defective charger is used. • In the case using car charger, the high output from truck may affect to the device. Also please have the device disconnected from the cigar jack charger which may affect to the device when starting the car engine. Guide for the Paid Service • After Product Warranty Period (1 year/6 months for the battery) • User's negligence or any failure from improper disassemble, repair and modification. • Failure caused by acts of God such as fire and flood. • Failure using other options which is not provided from Partron. • This Warranty does not cover product failures due to improper repair installations, modifications or service performed by a non-authorized person. • Any Consumable parts. Product Warranty •The warranty is valid only if the original receipt issued to the original purchaser by the dealer. •If the product label is removed, physical change of the product or unapproved repair by the 3rd person, will invalidate of the warranty. •The consumables, such as ear cap, battery and other accessories, which have limited life, will be excluded from the product warranty. •This Warranty do not cover for the damage and accident by the misuse. •This Warranty do not cover the lost and damage of the product on either transportation or delivery. FCC Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:01:05 14:55:44+10:00 Creator : Adobe Illustrator CS5 Modify Date : 2015:02:10 09:50:58+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : [파트론]PSB-100메뉴얼_영문20141231 Metadata Date : 2015:02:10 09:50:58+09:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 56 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 6721 bytes, use -b option to extract) Instance ID : uuid:86639912-f48c-4d7f-abf8-b5c41a14dd01 Document ID : xmp.did:8FEFA0039594E411AF0E83FD514BCA4F Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:e0260151-f43e-423b-a300-713e096afefa Derived From Document ID : xmp.did:49A6B660D388E411B1DDEB3F3D6F2E7C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved History Instance ID : xmp.iid:13A83820911EE411938BD910DCD72B8C, xmp.iid:49A6B660D388E411B1DDEB3F3D6F2E7C, xmp.iid:8FEFA0039594E411AF0E83FD514BCA4F History When : 2014:08:08 09:50:50+09:00, 2014:12:21 14:36:57+09:00, 2015:01:05 14:55:40+09:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows), Adobe Illustrator CS5 History Changed : /, /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : D:\Accessary_Business_2014\PSB-100\이어폰O-render\black\우측면-1_ 추가.jpg, C:\Users\RYUMISUN\Desktop\11\manual.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 210.001480 Max Page Size H : 826.641016 Max Page Size Unit : Millimeters Font Name : AdobeMyungjoStd-Medium, NanumGothicBold, NanumGothic Font Family : Adobe 명조 Std, 나눔고딕, 나눔고딕 Font Face : M, Bold, Regular Font Type : Open Type, TrueType, TrueType Font Version : Version 1.006;PS 1.003;hotconv 1.0.57;makeotf.lib2.0.21895, Version 3.020;PS 1;hotconv 1.0.57;makeotf.lib2.0.21895, Version 3.010;PS 1;hotconv 1.0.56;makeotf.lib2.0.21325 Font Composite : False, False, False Font File Name : AdobeMyungjoStd-Medium.otf, NanumGothicBold.ttf, NanumGothic.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 1 For : RYUMISUN, Bounding Box : 139 -2084 630 171 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools