User Manual
CE TEST REPORT Report No.: EMC-FCC-R0086 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT HOW TO OPEN ESMART TOUCH Connect the power cable to the controller. Double click with a pointer. HOW TO OPEN ESMART TOUCH Double click HOW TO OPEN ESMART TOUCH Double click HOW TO OPEN ESMART TOUCH Double click HOW TO CREATE & REGISTER MASTER CARD Click HOW TO CREATE & REGISTER MASTER CARD 1234 Enter Password - initial password is 1234. HOW TO CREATE & REGISTER MASTER CARD After entering password, MASTER ADMINISTRATION MENU displays. Select Change Master card. HOW TO CREATE & REGISTER MASTER CARD Select Add to register Master Card. HOW TO CREATE & REGISTER MASTER CARD Place any kind of blank MIFARE card to create a Master Card. HOW TO CREATE & REGISTER MASTER CARD Now, Master Card for this controller has been created. HOW TO SET CONTROLLER FUNCTION Place Master Card on the controller to set the functions to operate the locks through controller. HOW TO SET CONTROLLER FUNCTION Click HOW TO SET CONTROLLER FUNCTION 1234 Enter Password - initial password is 1234. HOW TO SET CONTROLLER FUNCTION After entering password, MASTER ADMINISTRATION MENU displays. HOW TO SET CONTROLLER FUNCTION 1. CHANGE MASTER PASSWORD Enter current password and then, new password. HOW TO SET CONTROLLER FUNCTION 2. CHANGE MASTER CARD To add new or additional master cards, click Add. To delete the master cards in the use, click Delete selection. To delete all master cards, click Delete all. HOW TO SET CONTROLLER FUNCTION 3. LOCK CONTROL 1) Locks to cover : range the locks that the assigned controller covers. 2) Lock setting : Set Lock ID and latch lag time (by the seconds) on the menu and then wake-up by touching or pushing the lock front. Then, the lock ID is provided to the awaken lock. 3) Check Lock setting : Waking up (by touching or pushing the lock front), the lock ID already set displays on the controller. This function is to confirm the lock ID. HOW TO USE AND OPERATE THE LOCKS Place MASTER CARD on the controller twice to register user cards & assign locks as well as opening locks with a master card at an emergency. HOW TO USE AND OPERATE THE LOCKS The menu for Register User, Open locks with Master Card displays. HOW TO USE AND OPERATE THE LOCKS 1. REGISTER USER Click Register User to register user card and select the lockers to occupy & un-occupy. HOW TO USE AND OPERATE THE LOCKS There are 2 ways to select free lockers & register user cards. Show one displays free lockers one by one. Show all displays free lockers at one sight. HOW TO USE AND OPERATE THE LOCKS 1) Show One Click Show one to select free locker one by one. HOW TO USE AND OPERATE THE LOCKS After selecting one free locker (e.g. locker No. 2), place user card on the controller to occupy the selected locker. HOW TO USE AND OPERATE THE LOCKS After selecting the locker No. and registered the user card to the selected locker, the user steps towards the assigned locker and wakes up or push the front of the lock to open the locker. Place the belongings inside the locker and close the door ( latch is full cycle mode – automatically opens and locks when the user closes the locker door) HOW TO USE AND OPERATE THE LOCKS 2) Show all Click Show all to select free locker from all locker list. HOW TO USE AND OPERATE THE LOCKS All available lockers display. HOW TO USE AND OPERATE THE LOCKS Select the locker to occupy. HOW TO USE AND OPERATE THE LOCKS After selecting the free locker, place user card on the controller to occupy the selected locker. HOW TO USE AND OPERATE THE LOCKS Click Issue User card to register a User card for the selected locker. HOW TO USE AND OPERATE THE LOCKS 3) Unlock and Re-use the locker To open the locker the user already occupied, place user card and then the locker No. the user occupied displays . - If you want to re-use the locker, click “YES”, then you can reoccupy the selected locker with your user card without re-registering. - If you select “No”, you can’t use the selected locker anymore and have to re-register user card to occupy other free locker. HOW TO USE AND OPERATE THE LOCKS 2. OPEN LOCKS WITH MASTER CARD Click Open locks with Master card to open the locks with Master card at the emergency. HOW TO USE AND OPERATE THE LOCKS There are 2 options to open lockers with a Master Card ; - Open selected locker with Open Selection - Open all lockers with Open all HOW TO USE AND OPERATE THE LOCKS 1) Open Selection - Select the lockers to open. - Click Open selection. HOW TO USE AND OPERATE THE LOCKS Confirm if the selected lockers are open with Master card. HOW TO USE AND OPERATE THE LOCKS Selected locker is open with Master card. HOW TO USE AND OPERATE THE LOCKS 2) Open all Click Open selection. HOW TO USE AND OPERATE THE LOCKS Confirm if all lockers are open with Master card. HOW TO USE AND OPERATE THE LOCKS Now all lockers are open with Master card.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Create Date : 2012:11:19 22:22:35-09:00 Creator Tool : nPDF (pdftk 1.41) Modify Date : 2012:11:26 20:05:56+09:00 Metadata Date : 2012:11:26 20:05:56+09:00 Producer : itext-paulo-155 (itextpdf.sf.net-lowagie.com) Format : application/pdf Document ID : uuid:febc9b30-4cdf-4e31-a1bc-4b07b40ac821 Instance ID : uuid:adf7d452-87e2-4ee9-bff5-04865cb86537 Has XFA : No Page Count : 40 Creator : nPDF (pdftk 1.41)EXIF Metadata provided by EXIF.tools