PEGATRON CLG8202SEC-NA Wireless Home Automation and Security User Manual rev

PEGATRON CORPORATION Wireless Home Automation and Security Users Manual rev

Contents

Users Manual rev

Print Vendor Remove Before Printing Printing Specifications Cisco DLCi Model CLG-8202-SEC Installation Guide 78-100394-01A0 INLET Page Size: 8.5 x 11 Color process: Black (1/1) double sided Paper weight: 60 # Paper type: Opaque Varnish: N/A Number of Pages: 1 COVER N/A BINDING N/A
Cisco DLCi Model CLG-8202-SECInstallation GuideWelcomeThe Cisco Digital Life Controller – International (DLCi) Model CLG-8202-SEC is a key component of the Digital Life platform. This service delivery platform communicates with other network devices to provide home security and life monitoring to assist with home healthcare needs. Contact your service provider for more information about Digital Life services.LEDs 1 Power Green indicates that 15V power is available to the controller O indicates that there is no power to the controller 2 DLA Cloud Green indicates connectivity to the Digital Life application (DLA) backend through the wired or wireless network O indicates no connectivity to the DLA backend through the wired or wireless network 3 Controller Status Green indicates that the DLA controller is active and in Normal mode Yellow indicates that the Linux OS has booted Red indicates that uBoot is complete Blinking green indicates that the DLA controller is in Test mode Flashing yellow/green indicates jamming: • Yellow once/green once, repeating indicates one-way jamming at the controller • Yellow once/green twice, repeating indicates two-way jamming at the controller • Yellow once/green three times, repeating indicates one-way jamming at the repeater • Yellow once/green four times, repeating indicates two-way jamming at the repeater O during initial power up or when rebooting 4 AFM Radio Green indicates that the AFM radio is active Blinking green indicates that the AFM radio is in Discovery mode O indicates that the AFM radio is inactive 5 Z-Wave Radio Green indicates that the Z-Wave radio is active Blinking green indicates that the Z-Wave radio is in Discovery mode O indicates that the Z-Wave radio is inactiveBottom Panel 1 Power Connects to a power adapter 2 Power Switch Switches power on and o 3 Ethernet Ports Connects to an RJ-45 Ethernet port on a PC or router 4 USB 2.0 Ports Connects to client devices that use a USB 2.0 connector15V DC1.5A22.5WPOWERMAC: F45FD7B6D90SKU: CL-73224500AT-K9Factory ID: F2Model No: CLG-8202-SEC EUDate of mfg: 14/06INTERNET 3GS/N: 1230920221 2T164803 4AFMSTATUS12345T16479
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its a liates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)© 2014 Cisco and/or its a liates. All rights reserved Last Updated: June 2014 Part Number: 78-100394-01A0Printed in ChinaWhat’s in the carton?Verify that the following items are in the shipping carton. If any items are missing, contact your service provider:• DLCi controller• DLCi cradle• Protective cover for the USB connector• AC power adapter• Right-angle USB connector• Two Phillips screwsInstallation instructions The DLCi can be installed in one of two ways: desktop- or wall-mounted. Items neededIn addition to the items provided in the DLCi shipping carton, the following additional materials are needed:• One Phillips screwdriver• One 3G USB dongle• One Ethernet cable long enough to reach from the DLCi to a PC or routerWhen mounting to a wall, the following additional materials are needed:• One pencil to trace the mounting holes to the wall• Two #6 (M3.5) pan head screws• One screwdriver • One drill and drill bit Wall mounting Allow approximately 2 minutes to install the DLCi to a wall.T16480Mounting holes1. Turn the cradle so the mounting holes are opposite from you, and place the cradle against the wall where you intend to mount it.2. While holding the cradle in place, use a pencil to trace the mounting holes onto the wall. 3. Drill two holes into the wall where the pencil traces indicate.4. Install the mounting screws into the wall, leaving a gap of about ½-inch between the screw head and the wall. 5. Place the cradle into position by slipping the large end of both mounting slots over the screw heads and sliding the cradle down until the narrow end of the mounting slots contacts the screw shafts.6. Continue installing the DLCi by following the instructions for Desktop mounting.Desktop mountingAllow approximately 3-5 minutes to install the DLCi to stand on a desktop.ControllerCradle3G Dongle PhillipsScrewsRight-angle USB ConnectorProtective CoverT164821. Insert the controller into the cradle until you feel it lock into place.2. Using a screwdriver, secure the controller to the cradle by inserting the two screws and tightening. 3. Insert the right-angle USB connector into the yellow 3G port on the bottom of the controller. 4. Insert a 3G dongle into the other end of the right-angle USB connector.5. Insert the protective cover over the 3G USB dongle until you feel it lock into place.6. Insert one end of an Ethernet cable into the yellow Internet port and the other end of the cable into an Ethernet port on a router. Note: The controller will be connected to a router except during initial set up when it is connected to a PC for con guration of network parameters.7. Insert one end of the AC power adapter cable into the Power port and the other end of the cable into a power outlet.8. Turn the Power switch to the on position (|). All LEDs will  ash for one second; during this time, the STATUS LED will  ash red, yellow, and green.Battery replacementThe DLCi battery is designed to last up to nine years under normal operating conditions. Should the battery fail before that time, contact your service provider for assistance. Do not attempt to replace the battery on your own; doing so could damage the DLCi controller. 78-100394-01A06.3. Insert the right-angle USB connector into the USB port on 4. Insert the protective cover over the USB Port until you feel it the bottom of the controller.lock into place. 5. Insert one end of an Ethernet cable into the yellow Internet port and the other end of the cable into an Ethernet port on a router.7.

Navigation menu