PEGATRON CLG8202SEC-NA Wireless Home Automation and Security User Manual rev

Download:
Mirror Download [FCC.gov]
Document ID	2316977
Application ID	f7I9BRCrMzjAGWCbk3pAPg==
Document Description	Users Manual rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.78kB (372247 bits)
Date Submitted	2014-07-07 00:00:00
Date Available	2014-12-30 00:00:00
Creation Date	2017-10-22 02:56:46
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 02:56:46
Document Title	Cisco DLCi Model CLG-8202-SEC Getting Started Guide
Document Creator	Acrobat PDFMaker 10.1 for Word

Print Vendor Remove Before Printing
Printing Specifications
Cisco DLCi Model CLG-8202-SEC Installation Guide
78-100394-01A0
INLET
Page Size:
Color process:
Paper weight:
Paper type:
Varnish:
Number of Pages:
8.5 x 11
Black (1/1) double sided
60 #
Opaque
N/A
COVER
N/A
BINDING
N/A
Installation Guide
Cisco DLCi Model CLG-8202-SEC
Welcome
The Cisco Digital Life Controller – International (DLCi) Model CLG-8202-SEC is a key component of the Digital Life platform. This service
delivery platform communicates with other network devices to provide home security and life monitoring to assist with home healthcare
needs. Contact your service provider for more information about Digital Life services.
LEDs
Green indicates that 15V power is available to the controller
Off indicates that there is no power to the controller
2 DLA Cloud
Green indicates connectivity to the Digital Life application (DLA) backend through the
wired or wireless network
Off indicates no connectivity to the DLA backend through the wired or wireless network
3 Controller Status
Green indicates that the DLA controller is active and in Normal mode
Yellow indicates that the Linux OS has booted
Red indicates that uBoot is complete
Blinking green indicates that the DLA controller is in Test mode
Flashing yellow/green indicates jamming:
• Yellow once/green once, repeating indicates one-way jamming at the controller
• Yellow once/green twice, repeating indicates two-way jamming at the controller
• Yellow once/green three times, repeating indicates one-way jamming at the repeater
• Yellow once/green four times, repeating indicates two-way jamming at the repeater
Off during initial power up or when rebooting
4 AFM Radio
Green indicates that the AFM radio is active
Blinking green indicates that the AFM radio is in Discovery mode
Off indicates that the AFM radio is inactive
5 Z-Wave Radio
Green indicates that the Z-Wave radio is active
Blinking green indicates that the Z-Wave radio is in Discovery mode
Off indicates that the Z-Wave radio is inactive
Bottom Panel
STATUS
AFM
T16479
1 Power
SKU: CL-73224500AT-K9
Connects to a power adapter
2 Power Switch
Switches power on and of
3 Ethernet Ports
Connects to an RJ-45 Ethernet port on a PC or router
4 USB 2.0 Ports
Connects to client devices that use a USB 2.0
connector
MAC: F45FD7B6D90
3G
INTERNET
Date of mfg: 14/06
POWER
15V DC
1.5A
22.5W
Factory ID: F2
Model No:
CLG-8202-SEC EU
S/N: 123092022
T16480
1 Power
What’s in the carton?
Desktop mounting
Verify that the following items are in the shipping carton. If any items
are missing, contact your service provider:
Allow approximately 3-5 minutes to install the DLCi to stand on a
desktop.
• DLCi controller
• DLCi cradle
• Protective cover for the USB connector
Controller
• AC power adapter
• Right-angle USB connector
• Two Phillips screws
Installation instructions
Cradle
The DLCi can be installed in one of two ways: desktop- or wallmounted.
Items needed
In addition to the items provided in the DLCi shipping carton, the
following additional materials are needed:
3G Dongle
• One Phillips screwdriver
Phillips
Screws
Right-angle USB Connector
• One 3G USB dongle
• One Ethernet cable long enough to reach from the DLCi to a PC
or router
T16482
Protective Cover
When mounting to a wall, the following additional materials are
needed:
• One pencil to trace the mounting holes to the wall
1. Insert the controller into the cradle until you feel it lock into place.
• Two #6 (M3.5) pan head screws
2. Using a screwdriver, secure the controller to the cradle by
inserting the two screws and tightening.
• One screwdriver
• One drill and drill bit
3. Insert
Insert the right-angle
right-angle USB connector
connector into
USB port
3.
into the
the yellow
3G on
port on
bottom ofofthe
thecontroller.
controller.
the bottom
Wall mounting
4. Insert
Insert athe3Gprotective
cover
USB
Portright-angle
until you feel
4.
dongle into
theover
otherthe
end
of the
USBit
connector.
lock into place.
T16480
Allow approximately 2 minutes to install the DLCi to a wall.
5. Insert
one protective
end of ancover
Ethernet
intoUSB
the dongle
yellow until
Internet
5.
Insert the
overcable
the 3G
youport
feel
theinto
other
end of the cable into an Ethernet port on a router.
itand
lock
place.
6. Insert one end of an Ethernet cable into the yellow Internet port
and the other end of the cable into an Ethernet port on a router.
Note: The controller will be connected to a router except during
initial set up when it is connected to a PC for coniguration of
network parameters.
Mounting holes
1. Turn the cradle so the mounting holes are opposite from you,
and place the cradle against the wall where you intend to mount
it.
6.
7.
Insert one end of the AC power adapter cable into the Power
port and the other end of the cable into a power outlet.
2. While holding the cradle in place, use a pencil to trace the
mounting holes onto the wall.
7.
8.
Turn the Power switch to the on position (|). All LEDs will flash
for one second; during this time, the STATUS LED will flash red,
yellow, and green.
3. Drill two holes into the wall where the pencil traces indicate.
4. Install the mounting screws into the wall, leaving a gap of about
½-inch between the screw head and the wall.
Battery replacement
5. Place the cradle into position by slipping the large end of both
mounting slots over the screw heads and sliding the cradle
down until the narrow end of the mounting slots contacts the
screw shafts.
The DLCi battery is designed to last up to nine years under normal
operating conditions. Should the battery fail before that time, contact
your service provider for assistance. Do not attempt to replace the
battery on your own; doing so could damage the DLCi controller.
6. Continue installing the DLCi by following the instructions for
Desktop mounting.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its ailiates in the U.S. and other countries. To view a list of Cisco trademarks, go to
this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1110R)
© 2014 Cisco and/or its ailiates. All rights reserved
Last Updated: June 2014
Part Number: 78-100394-01A0
Printed in China
78-100394-01A0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:06:23 15:29:02-04:00
Keywords                        : 78-100394-01A0, DLCi, CLG-8202-SEC
Modify Date                     : 2014:07:04 20:29:01+08:00
Has XFA                         : No
Language                        : EN-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:07:04 20:29:01+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:b5a56996-dd90-4a20-b695-56814eaf5bec
Instance ID                     : uuid:4c2ea1e8-3cee-46e6-ab2c-a961a55b2cad
Format                          : application/pdf
Creator                         : 
Title                           : Cisco DLCi Model CLG-8202-SEC Getting Started Guide
Description                     : This document describes the Cisco DLCi Model CLG-8202-SEC and provides instructions for installing it on a desktop or wall. The target audience is the subscriber. Copyright June 2014.
Subject                         : 78-100394-01A0, DLCi, CLG-8202-SEC
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20140604182908
Company                         : Cisco Systems
State                           : 1
Version                         : 1.1
Page Layout                     : OneColumn
Page Count                      : 3

EXIF Metadata provided by EXIF.tools