POWER ONE ITALY V2P53 Cellular Module for Data Monitoring User Manual
POWER-ONE ITALY SPA Cellular Module for Data Monitoring
User Manual
V2P53 - WLAN board MODEL: V2P53 FCC ID: X6W-V2P53 V2P53 – WLAN board is a factory optionally assembled communication board proper to be used for instance on UNO-DM-PLUS inverter series but not limited to this product family. This communication board provides the following features: - Wireless bidirectional communication 802.11 b/g/n compliant; - Dual mode, access point + station; - Data logging capabilities; - 4GByte Flash disk storage; - Integrated web server It is a plugable board directly connected to UNO-DM-PLUS logic board through a dedicated connector. Its installation on inverter is typically done by factory, but when installed as a spare part in a repairing process, the installation has to be executed by trained personnel only. The board is powered by the inverter. Proper connector for antenna is available on board. The board uses a Murata LBWA17DZX6, an 802.11b/g/n WLAN module built around the Cypress chipset. Techical data are in following table. In the block diagram are shown in/out buses and signals. Release 0.4 – July 2017 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Installer should take care that Regulatory Label applied on the Host Equipment includes the following: Contains FCC ID: X6W-V2P53. Other labelling means as long as it includes the text “Contains FCC ID: V2P53” is allowed. This device shall be used such that a minimum separation distance of 20cm/7,87” is maintained between the radiator (antenna) and user's/nearby people's body. V2P53 - WLAN board Item Product name Connections Connector to UNO-DM Logic board Input / Output Inverter Hyperlink USB RF Supply Power supply Phisical Environmental Protection Class Value V2P53 Note WLAN Board 18 male pin connector 6 male pin connector RS485 / CAN USB 2.0 802.11 b/g/n Power + Inverter Hyperlink USB UFL connector From the inverter logic board, 12V Bare pcb to be assembled into UNODM inverters 50mmx42mmx7mm (SMD top and bottom)+connector Inverter shall be completely powered off for at least 5 minutes to let any voltage reduced to a safe level; plug in the board; secure the board to the provided click stand offs. Dimensions mm (HxDxW) Installation Certifications Marking Safety and EMC Standard Installation and operation shall be executed by trained personnel only. Please read this instructions before operate installation or dismantling. FCC ID X6W-V2P53 FCC part 15 12VDC Typ. Inverter Hyperlink V2P53 USB 2.0 WLAN Board PWM4 VOUT RF Out Release 0.4 – July 2017 ENABLE
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 1d12e6f7-6569-11e7-0000-b825cd32ac69 Producer : GPL Ghostscript 8.71 Modify Date : 2017:07:07 14:12:58+02:00 Create Date : 2017:07:07 14:12:58+02:00 Creator Tool : Adobe Acrobat 17.9.0 Document ID : 1d12e6f7-6569-11e7-0000-b825cd32ac69 Format : application/pdf Title : V2P53 (WLAN Board) Instruction Manual _ Release 0 4 - July 2017_.pdf Creator : jluke Author : jlukeEXIF Metadata provided by EXIF.tools