PROSPACE HUB30 HUB User Manual 15 HUB 3 0 UserMan

PROSPACE PTE LTD HUB 15 HUB 3 0 UserMan

15_HUB 3.0 UserMan

PROSPACE(Hub(3.0(Technical!Description!!! Date:!02!January!2019!Descriptions:(The!HUB3.0!is!used!to!receive!RF!433Mhz!signals!sent!by!other!separate!PIR!sensors/devices!–!and!thereafter!transmit!the!data!to!internet!via!embedded!3G!module!(with!3G!simcards!from!local!telco)!or!via!WiFi.!Technical!Specification!GSM!Band!• GSM!850!MHz• E-GSM!900!MHz• GSM!1800!MHz• GSM!1900!MHzUMTS!Band!• Band!II!1900!MHz•Band!V!850!MHzWiFi!•802.11!b/g/nEnvironment!To!be!deployed!in!sheltered!environment!not!exposed!to!rains!and!direct!sunlight.!(e.g.-!offices)!!Power!Rating!5V,!3A!Dimension!118mm!(L)!x!118mm!(W)!x!25mm!(H)!User(manual(–(How(to(deploy:(1. Power-on!the!hub3.0!by!connecting!its!adapter!to!normal!power!socket!readilyavailable!in!any!buildings.!2. The!hub3.0!will!then!start!collecting/receiving!signals!from!nearby!PIR!devices.3. To!read!the!RF!data!collected,!below!the!2!ways:a. Connect!WiFi!to!HUB3.0!to!transfer!data!to!Internet.b. Insert!3G!simcard!into!the!Hub3.0!and!connect!to!mobile!!broadband/3Gnetwork.
FCC statement This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and2. This device must accept any interference that is received, including any interference that may cause undesired operation. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Do not use the device with the environment which below minimum -30℃ or maximum over 50℃ . NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help RF exposure warning : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu