PROSPACE HUB30 HUB User Manual 15 HUB 3 0 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	4192829
Application ID	ppAWeQu9fHxURDj8B4X9Uw==
Document Description	15_HUB 3.0 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.71kB (133823 bits)
Date Submitted	2019-03-06 00:00:00
Date Available	2019-03-06 00:00:00
Creation Date	2019-01-28 02:33:18
Producing Software	macOS Version 10.14.2 (Build 18C54) Quartz PDFContext
Document Lastmod	2019-03-04 20:49:00
Document Title	Microsoft Word - Hub3.0 Data Sheet & User Manual.docx
Document Creator	Word

PROSPACE Hub 3.0
Technical Description
Date: 02 January 2019
Descriptions: The HUB3.0 is used to receive RF 433Mhz signals sent by other separate
PIR sensors/devices – and thereafter transmit the data to internet via embedded 3G
module (with 3G simcards from local telco) or via WiFi.
Technical Specification
GSM Band
• GSM 850 MHz
• E-GSM 900 MHz
• GSM 1800 MHz
• GSM 1900 MHz
UMTS Band
• Band II 1900 MHz
• Band V 850 MHz
WiFi
• 802.11 b/g/n
Environment
To be deployed in sheltered environment not exposed to
rains and direct sunlight. (e.g.- offices)
Power Rating
5V, 3A
Dimension
118mm (L) x 118mm (W) x 25mm (H)
User manual – How to deploy:
1. Power-on the hub3.0 by connecting its adapter to normal power socket readily
available in any buildings.
2. The hub3.0 will then start collecting/receiving signals from nearby PIR devices.
3. To read the RF data collected, below the 2 ways:
a.
Connect WiFi to HUB3.0 to transfer data to Internet.
b.
Insert 3G simcard into the Hub3.0 and connect to mobile broadband/3G
network.
FCC
statement
This device complies with Part 15 of the FCC Rules: Operation is subject to
the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any interfer
ence that may cause undesired operation.
RF exposure warning :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz)
band.
Ad Hoc function is supported but not able to operate on non-US frequencies.
Do not use the device with the environment which below minimum -30 ℃ or maximum
over 50℃ .
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2019:01:28 02:33:18Z
Creator Tool                    : Word
Modify Date                     : 2019:03:04 20:49+08:00
Metadata Date                   : 2019:03:04 20:49+08:00
Keywords                        : 
Producer                        : macOS Version 10.14.2 (Build 18C54) Quartz PDFContext
Format                          : application/pdf
Title                           : Microsoft Word - Hub3.0 Data Sheet & User Manual.docx
Document ID                     : uuid:66f0ce17-5c17-4303-8f64-cb2e9918137a
Instance ID                     : uuid:fd9601c2-1681-4294-95cd-0764e2ded682
Page Count                      : 2
Creator                         : Word

EXIF Metadata provided by EXIF.tools