PROSPACE HUB30 HUB User Manual 15 HUB 3 0 UserMan
PROSPACE PTE LTD HUB 15 HUB 3 0 UserMan
PROSPACE >
15_HUB 3.0 UserMan
PROSPACE(Hub(3.0(
Technical!Description!!! Date:!02!January!2019!
Descriptions:(The!HUB3.0!is!used!to!receive!RF!433Mhz!signals!sent!by!other!separate!
PIR!sensors/devices!–!and!thereafter!transmit!the!data!to!internet!via!embedded!3G!
module!(with!3G!simcards!from!local!telco)!or!via!WiFi.!
Technical!Specification!
GSM!Band!
• GSM!850!MHz
• E-GSM!900!MHz
• GSM!1800!MHz
• GSM!1900!MHz
UMTS!Band!
• Band!II!1900!MHz
•Band!V!850!MHz
WiFi!
•802.11!b/g/n
Environment!
To!be!deployed!in!sheltered!environment!not!exposed!to!
rains!and!direct!sunlight.!(e.g.-!offices)!!
Power!Rating!
5V,!3A!
Dimension!
118mm!(L)!x!118mm!(W)!x!25mm!(H)!
User(manual(–(How(to(deploy:(
1. Power-on!the!hub3.0!by!connecting!its!adapter!to!normal!power!socket!readily
available!in!any!buildings.!
2. The!hub3.0!will!then!start!collecting/receiving!signals!from!nearby!PIR!devices.
3. To!read!the!RF!data!collected,!below!the!2!ways:
a. Connect!WiFi!to!HUB3.0!to!transfer!data!to!Internet.
b. Insert!3G!simcard!into!the!Hub3.0!and!connect!to!mobile!!broadband/3G
network.
FCC statement
This device complies with Part 15 of the FCC Rules: Operation is subject to
the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any interfer
ence that may cause undesired operation.
This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz)
band.
Ad Hoc function is supported but not able to operate on non-US frequencies.
Do not use the device with the environment which below minimum -30℃ or maximum
over 50℃ .
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
RF exposure warning :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.