Pacific Bioscience Laboratries RBMK3 Sonic Skin Brush User Manual 0152PBLuserguide final6

Download:
Mirror Download [FCC.gov]
Document ID	525486
Application ID	QwRiEE2zJ8YYlT2WK2gMZQ==
Document Description	PDF of DFU
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.35kB (191883 bits)
Date Submitted	2005-03-21 00:00:00
Date Available	2005-05-04 00:00:00
Creation Date	2005-03-17 18:54:44
Producing Software	Acrobat Distiller 7.0 for Macintosh
Document Lastmod	2005-03-17 18:57:04
Document Title	0152PBLuserguide.final6
Document Creator	QuarkXPress: pictwpstops filter 1.0
Document Author:	Christopher Spivey

0152PBLuserguide.final6
3/17/05
6:53 PM
Page 2
front
cove
back
over
www.clarisonic.com
user guide
0152PBLuserguide.final6
3/17/05
6:53 PM
Page 4
contents
side
front
over
Dear CLARISONIC Owner –
your CLARISONIC
Thank you for purchasing the CLARISONIC Skin
Care Brush. We at Pacific Bioscience Laboratories
are excited to share our product with you and
hope that you enjoy using it.
important cautions and warnings
important safeguards
using your CLARISONIC
We’ve designed CLARISONIC to work with the
natural elasticity of the skin, gently flexing the skin
to help open the pores and loosen dirt and oil.
The back and forth sonic oscillating motion of
the inner brush effectively cleans, clarifies, and
stimulates the skin to give you the most effective
and most gentle cleansing possible. We think it’s
the best minute you can give your skin every day.
caring for your CLARISONIC
™
11
troubleshooting
13
warranty
We’d love to hear how CLARISONIC works for
you. E-mail me at CEO@clarisonic.com, or call us
at 1-888-5-CLARISONIC (1-888-525-2747).
Sincerely,
David Giuliani
CEO, Chairman
Pacific Bioscience Laboratories, Inc.
For more information on
CLARISONIC use and
maintenance, as well as
product updates and
releases, please visit us
at www.clarisonic.com.
This manual and
additional information are
also available online for
your convenience.
page
0152PBLuserguide.final6
3/17/05
6:53 PM
Page 2
your clarisonic
page
charger cradle
handle
brush head
power button
green light
indicating charge
yellow light
indicating power level
brush heads
sensitive
(white plastic base)
normal
(gray plastic base)
daily cleanser
Congratulations! You are about to experience the new
wave of skin care with the CLARISONIC™ Skin Care
Brush. Before you start, please take the time to get to
know your CLARISONIC and how it works.
The CLARISONIC sonic technology works synergistically
with the natural elasticity of the skin to provide gentle
daily cleansing as part of a total skin care routine.
A deep-cleansing zone 1 is created between the outer
(stationary) brush and the inner (oscillating) brush 2 .
Oscillating back and forth at a sonic frequency that
produces about 300 movements per second, a
flexing action is created between the outer and inner
brushes that works deep within the pores to loosen
dirt and oil. The brush motion effectively cleans, clarifies
and stimulates, resulting in smoother feeling and
looking skin.
page
3/17/05
6:53 PM
Page 4
IMPORTANT SAFEGUARDS
IMPORTANT CAUTIONS
AND WARNINGS
The CLARISONIC is designed for use with most skin
types. Your skin is constantly changing, and due to the
dynamic nature of your skin you may want to use different
power levels and/or different brush heads (Normal vs.
Sensitive). Please visit our website www.clarisonic.com
for more information.
Do not use this product if you:
page
have heightened skin allergies
have an extreme sunburn
have open wounds or open lesions
have recently had a chemical peel or
microdermabrasion*
are currently taking medication that can cause
skin sensitivity*
have recently had facial cosmetic surgery*
*Unless recommended by a skin care professional
We recommend that you use the CLARISONIC Daily
Cleanser that has been optimized for gentle daily use with
the CLARISONIC Skin Care Brush. If you decide to use
another cleanser, test it with the CLARISONIC Skin Care
Brush on your forearm prior to using it on your face. Some
cleansers with acids may irritate your skin when used with
the CLARISONIC Skin Care Brush.**
The CLARISONIC Daily Cleanser is to be used on the
skin. Do not use on the eyes or the interior of the mouth.
If contact with the eyes occurs, rinse thoroughly with water.
Do not use the CLARISONIC Skin Care Brush with
mechanical exfoliants such as microbeads and shells.**
**Consult your skin care professional.
Using the CLARISONIC to remove makeup will stain
the bristles, but will not affect performance. Never use the
CLARISONIC to remove eye makeup. If discoloration
occurs, clean the brush head with soap and water.
NOTE: This equipment
has been tested and
found to comply with
the limits for a Class B
digital device, pursuant
to Part 15 of the FCC
Rules. These limits are
designed to provide
reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio
frequency energy and,
if not installed and used
in accordance with the
instructions, may cause
harmful interference to
radio communications.
However, there is no
guarantee that interference will not occur in
a particular installation.
If this equipment does
cause harmful interference to radio or
television reception,
which can be determined by turning the
equipment off and on,
the user is encouraged
to try to correct the
interference by one or
more of the following
measures:
Reorient or relocate the
receiving antenna.
Increase the separation
between the equipment
and receiver.
Connect the equipment
into an outlet on a circuit
different from that to
which the receiver is
connected.
Consult the dealer or
an experienced radio/
TV technician for help.
When using electrical products, especially when children are
present, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER—To reduce the risk of electrocution:
1 Do not use the CLARISONIC charger cradle while bathing.
2 Do not place or store the CLARISONIC charger cradle
where it can fall or be pulled into a tub or sink.
3 Do not place the CLARISONIC charger cradle in or drop
into water or other liquid.
4 Do not reach for a CLARISONIC charger cradle that has
fallen into water. Unplug immediately.
5 Do not plug into an incorrect voltage source outlet. Use only
with appropriate voltage.
6 Keep the cord away from heated surfaces.
WARNING—To reduce the risk of burns, electrocution,
fire or injury to persons:
1 Close supervision is necessary when the CLARISONIC
Skin Care Brush and charger cradle are used by, on or near
children or invalids.
2 Use the CLARISONIC Skin Care Brush only for its intended
use as described in the CLARISONIC User Guide. Do not
use attachments not recommended by the manufacturer.
3 The charger cradle is designed for plugging into an electrical
outlet. Refer to the bottom of the charger cradle for voltage
specification. Voltage converters or plug adapters do not
guarantee voltage compatibility. Never force the plug into
an outlet.
4 Never operate the CLARISONIC charger cradle if it has a
damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Call
CLARISONIC at 1-888-525-2747 so we can arrange for
examination and replacement if needed.
5 Keep the cord away from heated surfaces.
6 Never use while sleeping or drowsy.
7 Never drop or insert any object into any opening of the
charger cradle or handle.
8 Do not use where oxygen is being administered.
CLARISONIC is believed to be safe for use with many
common pacemakers. If you have any questions about
usage with a pacemaker, consult your physician or
pacemaker manufacturer prior to use.
9 The supply cord cannot be replaced. If the cord is damaged
the CLARISONIC charger cradle should be replaced.
10 Call CLARISONIC at 1-888-525-2747 to arrange for
replacement if needed.
0152PBLuserguide.final6
page
0152PBLuserguide.final6
3/17/05
6:53 PM
Page 6
using your clarisonic
Prior to the first use, we recommend that you charge the
CLARISONIC brush handle overnight. For best results,
charge your CLARISONIC for 24 hours before using it
for the first time by plugging the charger cradle into an
electrical outlet and placing the CLARISONIC in the
charger cradle. Once your CLARISONIC is fully charged,
it’s time to begin your CLARISONIC experience. For your
convenience, your CLARISONIC handle is waterproof
and may be used in the shower or bathtub. Refer to
Important Safeguards regarding the charger cradle.
page
The CLARISONIC is packaged with the Sensitive brush
head (white plastic base) installed. The Normal brush
head (gray plastic base) is also included. Please select
the appropriate brush head to match your skin type and
sensitivity. Remove all makeup and wet your skin with
warm water prior to use. Liberally apply cleanser to your
skin and wet the brush head with warm water. Then
gently apply the brush to your skin, push the power
button to turn your CLARISONIC on and gently move
the brush using a small circular motion. Pressing too
hard will slow the motion of the brush and reduce the
effectiveness. CLARISONIC also effectively clarifies the
neck, back, décolleté (upper chest), shoulders, arms,
and the back of the hands. It is recommended that you
do not share a brush head with another individual.
Cleansing Timer
For even and thorough cleansing of your face, the
CLARISONIC features a proprietary one-minute T-timer™
that beeps and pauses momentarily to indicate it is time
to move to another part of your face. We recommend
that you spend the first 20 seconds of brush time on
your forehead, 20 seconds on your nose/mouth region,
and 10 seconds on each cheek. The CLARISONIC will
shut off automatically after one minute. If you wish to
pause the cleaning cycle for up to 30 seconds, simply
press the power button. The yellow light will flash
(indicating sleep mode) and the CLARISONIC will
remember the time remaining on the T-timer. Press the
power button to resume cleaning. When finished, rinse
your skin with warm water and rinse the brush head of
the CLARISONIC with warm water.
forehead
20
seconds
each
cheek
10
seconds
nose/
mouth
20
seconds
To change the cleansing cycle time, turn your
CLARISONIC on and hold the power button for more
than 10 seconds. At around 3 seconds, you will hear
three tones (related to the Power Level) and then you will
hear beep tones relating to the optional cleansing times
and interval beeps. The cleansing time selections are
indicated by three different audible sequences:
Cleanse your face
using our T-Timer™
recommended
times and zones as
shown above.
Power Level
The CLARISONIC Skin Care Brush offers a choice of
2 power levels for your cleansing needs and comfort:
normal and low power. The CLARISONIC provides both
audible and visible indication of the power level. When
the CLARISONIC is turned on at the normal power level,
there are 3 ascending beeps and the yellow light is
illuminated. At the low power level, 3 descending beeps
are heard and the yellow light is turned off.
Gently move the
brush using a small
circular motion.
Power level
Audible indication
Visible indication
Normal
3 ascending beeps
yellow light on
Low
3 descending beeps
yellow light off
Cleansing cycle time Interval beeps
1 long beep &
2 short beeps
2 minutes
at 40, 80, and 100
seconds
1 long beep only
2 minutes
none
1 long beep &
1 short beep
1 minute (this is factory
selected default)
at 20, 40, and 50
seconds
Please note that you have now changed your power
setting as well as the cycle time. You may now reselect
your desired power level.
To toggle between the settings, hold the power button
down for 3 seconds continuously when turning on the
CLARISONIC. The CLARISONIC will remember the
previous power setting and will indicate it audibly and
visibly as power is turned on.
Audible indication
page
3/17/05
6:53 PM
Page 8
caring for your
clarisonic
Charging
A charger cradle designed to hold and charge the
brush handle is included. Simply place the CLARISONIC
into the charger cradle with the brush facing the raised
wave of the charger. The green light will flash while the
CLARISONIC is charging and will shine a constant
green when it is fully charged. It cannot be over-charged.
You can leave the CLARISONIC in the charger cradle,
or if you prefer, you can leave it out of the charger cradle
(for example, by the sink, tub or shower) as long as you
charge it after every 30 one-minute brushing cycles.
We recommend that you leave your CLARISONIC in its
charger cradle when not in use.
As an indication that the battery is low, the CLARISONIC
will alert you that it needs to return to the charger by
beeping 5 times while the yellow and green lights flash
5 times. For your convenience, the CLARISONIC only
needs to be charged overnight after every 30 one-minute
brushing cycles and can be kept out of the charger
(for example, by the sink, tub or shower) until it needs
charging. If it is used for 30 or more one-minute cycles
without being charged, the brush handle will beep
immediately following the one-minute brushing cycle, to
alert you to place it in the cradle for charging.
To clean the charger cradle, wipe with a soft, damp cloth.
Do not immerse the charger cradle in water.
Replacement Brush Heads
We recommend that the CLARISONIC brush heads be
replaced every 90 days as the bristles become fatigued
and less effective over time. They can be purchased from
your physician or medi-spa or at www.clarisonic.com.
to
rem
ov
pushdowne 1
ist
page
To clean your CLARISONIC, we recommend that,
once a week, you wash the brush head and the handle
separately using warm soapy water to remove any
buildup of debris that may have accumulated.
Do not attempt to open the brush handle to clean the
interior. To dry the bristles after use, rub the brush head
against a towel for 5-10 seconds while the CLARISONIC
is powered on. Do not use abrasive cleaners or
chemicals to clean any part of the CLARISONIC. Do not
put any part of the CLARISONIC in a dishwasher.
. . .an
To remove the brush head, 1 simply grip the brush
head firmly, then push and twist it counter-clockwise.
Then 2 pull the head away from the handle.
pullaway 2
To mount the brush head, 3 align the 3 notches
with the 3 pins, then 4 push down and twist the head
clockwise until it 5 snaps into place.
...a
to
mo
un
align
3 pins
and 3
notches
There are 2 types of brush heads offered to enhance
the comfort of your CLARISONIC experience. The brush
heads are offered in either Normal (gray plastic base) or
Sensitive (white plastic base) to match your skin type
and sensitivity. Both are included in the system kit and
are compatible with the CLARISONIC brush handle.
The brush heads can be purchased separately for
replacement use.
ist
tw
snap 5
pushdown 4
0152PBLuserguide.final6
page
3/17/05
6:53 PM
Page 10
troubleshooting
page
10
CLARISONIC Daily Cleanser
The CLARISONIC can be used with most facial
cleansers, but works best with the CLARISONIC Daily
Cleanser. Included with your CLARISONIC is a sample
of this cleanser. It is a lightly scented, non-foaming
cleanser designed for sensitive and normal skin.
The botanical ingredients include green tea, seaweed,
and cucumber extract. CLARISONIC Daily Cleanser
is available for purchase at your physician or medi-spa
or at www.clarisonic.com.
My CLARISONIC won’t turn on.
In order for the CLARISONIC to turn on, the battery
needs to be sufficiently charged. The warning beeps
and lights indicate that the device needs to be placed
in the charger overnight. Check to be sure that your
charger cradle is not plugged into an outlet that is linked
to a wall switch. If the problem persists, contact the
customer care department at 1-888-5-CLARISONIC
or 1-888-525-2747.
6 oz. size available for purchase.
2 oz. size sample package.
The bristles feel too harsh on my skin.
Always use the CLARISONIC on wet skin. The
CLARISONIC offers a choice of 2 power levels for
your cleansing needs and comfort. Try the lower power
level by holding the power button for 3 seconds when
turning it on. At the lower power level, 3 descending
beeps are heard and the yellow light is turned off.
Also, try using the sensitive brush head, as it is softer
on the skin and is designed for maximum comfort.
You can also improve your comfort by increasing the
amount of CLARISONIC Daily Cleanser or other
cleanser that you use.
My brush head appears stained.
With daily maintenance and washing, the brush head
should not stain. Using CLARISONIC to remove
makeup will cause discoloration, which will not
adversely affect performance. Never use CLARISONIC
to remove eye makeup.
10
The inner brush head is not moving, but sound is
coming from the handle.
Remove the brush head and twist it back into place,
assuring that the brush head is properly seated using its
3 attachment pins. This should reactivate the motion of
the inner bristles. If the problem persists, contact the
customer care department at 1-888-5-CLARISONIC
or 1-888-525-2747.
11
0152PBLuserguide.final6
page
11
3/17/05
6:53 PM
Page 12
warranty
The brush is noisy.
Remove the brush head and twist it firmly back into
place, assuring that the brush head is properly
seated using its 3 attachment pins. If the problem
persists, contact the customer care department at
1-888-5-CLARISONIC or 1-888-525-2747.
page
12
We are happy to offer a 30 day money-back
guarantee. If you are for any reason dissatisfied with
the purchase of your CLARISONIC, call the customer
service department at 1-888-5-CLARISONIC or
1-888-525-2747 to make arrangements for the return.
In addition, every CLARISONIC comes with a one year
warranty covering any problems resulting from every
day use. Call the customer service department at
1-888-5-CLARISONIC or 1-888-525-2747 if you feel
your CLARISONIC is not operating properly.
The brush beeps during use.
The beeps are your guide to a more even and thorough
cleansing of the face. For more on this, please see page
7 of this booklet.
The brush head won’t come off.
Grip the brush head firmly, push and twist it counterclockwise. Then pull the head away from the handle.
If you have any questions or comments, please contact
us at www.clarisonic.com, or at
1-888-5-CLARISONIC (1-888-525-2747)
CLARISONIC is a trademark of
Pacific Bioscience Laboratories, Inc.
Pacific Bioscience
Laboratories, Inc.
13222 SE 30th Street #A1
Bellevue WA 98005
Toll Free:
1-888-5-CLARISONIC or
1-888-525-2747
Local:
425-283-5700
www.clarisonic.com
12
PBL3501A
13
0152PBLuserguide.final6
insid
back
cove

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 for Macintosh
Create Date                     : 2005:03:17 18:54:44-08:00
Modify Date                     : 2005:03:17 18:57:04-08:00
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Metadata Date                   : 2005:03:17 18:57:04-08:00
Format                          : application/pdf
Creator                         : Christopher Spivey
Title                           : 0152PBLuserguide.final6
Document ID                     : uuid:2311fce5-9759-11d9-af39-0030654cee9e
Instance ID                     : uuid:68ee96b3-9759-11d9-8de3-0030654cee9e
Has XFA                         : No
Page Count                      : 8
Author                          : Christopher Spivey

EXIF Metadata provided by EXIF.tools