Panasonic Mobile Communications 208009A UMTS/ GSM Cellular Mobile with Bluetooth® and RFID User Manual 000 P 01A

Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with Bluetooth® and RFID 000 P 01A

208009A User Manual >

User Manual Part 1

Download:
Mirror Download [FCC.gov]
Document ID	1019762
Application ID	LgBKS+ZE31GAl1L4rgSO/g==
Document Description	User Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	271.44kB (3393038 bits)
Date Submitted	2008-10-23 00:00:00
Date Available	2008-11-19 00:00:00
Creation Date	2008-10-15 14:20:10
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2008-10-15 14:21:04
Document Title	000.P-01A.book
Document Creator	FrameMaker 7.2
Document Author:	Administrator

docomo PRIME series
P-01A
ISSUE DATE:
â08.10
Easy Search/Contents/Precautions
Before Using the Handset
Voice/Videophone Calls/PushTalk
Phonebook
Sound/Screen/Light Settings
Security Settings
Mail
NAME:
i-mode/i-motion/i-Channel/i-concier
Full Browser/PC Movie
PHONE NUMBER:
Camera
1Seg
MAIL ADDRESS:
Music
i-Îąppli/i-Widget
INSTRUCTION MANUAL
Osaifu-Keitai/ToruCa
Map/GPS Function
Data Management
Convenient Functions
Character Entry
Network Services
Overseas Use
PC Connection
Appendix/Troubleshooting
Index/Quick Manual
DOCOMO W-CDMAăťGSM/GPRS system
Thank you for selecting the âdocomo PRIME series P-01Aâ.
Before or during use of the P-01A, make sure that you read this manual and the
separate manuals for other optional devices thoroughly so that you can use the
P-01A correctly.
If you feel any inconvenience in reading the manual, contact the docomo
Information Center listed on the back page of this manual.
The P-01A is designed to be your close partner. Treat it carefully at all times to
ensure long-term performance.
âIt is recommended that you make separate notes of the information (such as
Phonebook entries, schedule events, text memos, record messages, voice
memos, movie memos) stored in the FOMA terminal and keep them in a safe
place. Note that we cannot be held responsible for the unlikely event of loss of
the stored contents due to a malfunction, repair, change of your model, or
other mishandling of the FOMA terminal.
âYou are advised to save your important data files to the microSD card. If you
have a personal computer, you can transfer and save the information such as
Phonebook entries, mail messages, schedule events, and others to the
personal computer by using DOCOMO keitai datalink.
Before using your FOMA terminal
âBecause the FOMA terminals use radio waves, they cannot be used in places
where radio waves do not reach, such as inside tunnels, underground, or in
buildings; or the outside where radio waves are weak or out of the FOMA
service area. They may not be used in the high-rise buildings even when the
antennas are unobstructed. You may also experience interruption of calls
even when using without moving while the radio waves are strong enough for
the three antennas to appear on the display.
âUse the FOMA terminal carefully to avoid disturbing other people when in
public, or in crowded or quiet places.
âSince the FOMA terminals use radio waves as the medium of
telecommunication, calls may be tapped by the third party. However, the
W-CDMAăťGSM/GPRS system automatically supports tapping prevention, so
your conversation will be incomprehensible to the third party.
âThe FOMA terminals change your voice into digital signals and send them to
the other party. In places where the radio waves are weak, the digital signals
may not be converted correctly, and in such a case, the voice may sound
different from the actual original voice.
âThe user hereby agrees that the user shall be solely responsible for the result
of the use of SSL. Neither DOCOMO nor the certifiers as listed herein make
any representation and warranty as for the security in the use of SSL. In the
event that the user shall sustain damage or loss due to the use of SSL, neither
DOCOMO nor the certifiers shall be responsible for any such damage or loss.
Certifiers: VeriSign Japan K.K., Cybertrust, Inc., GlobalSign K.K.,
RSA Security Inc., SECOM Trust Systems Co., Ltd., and
Comodo CA Ltd.
âThis FOMA terminal supports FOMA Plus-Area and FOMA High-Speed Area.
âThe FOMA terminal can be used only via the FOMA network provided by
DOCOMO and in DOCOMOâs roaming area.
For Using This Manual
This FOMA terminal supports Kisekae Tool (page 118). If you use
Kisekae Tool to change the design of the Menu display, some
menu configurations change according to the usage frequency
depending on the type of the menu. Further, some menu numbers
that are assigned to the menu items do not apply.
You can download the latest information about this manual
from the following DOCOMO website:
ăťUserâs Manual (PDF file) Download
(http://www.nttdocomo.co.jp/english/support/manual/index.html)
âťThe URL and the content of the website might be modified
without notice.
Access the online for checking or changing the content of your subscription, for application of respective services, and
for request of Information materials.
From i-mode
ď˝Menu ăĺŽ˘ć§ăľăăźă (user support)
(Respective applications/procedures)
From PC
My docomo (http://www.mydocomo.com/)
ăçłčžźăťăćçśă (Applications/Procedures)
Packet communication charges free
â˘ You will need your ânetwork IDâ to access e-site from i-mode.
â˘ No packet communication charges are incurred when accessing e-site from i-mode.
Accessing from overseas will incur charges.
â˘ You will need your âdocomo ID/passwordâ to access e-site from PC.
ĺç¨Žăçłčžźăťăćçśă
ĺç¨Žăçłčžźăťăćçśă (Respective applications/procedures)
â˘ If you do not have or you have forgotten your ânetwork IDâ or âdocomo ID/passwordâ,
contact the docomo Information Center listed on the back cover of this manual.
â˘ DOCOMO e-site may not be available depending upon the content of your subscription.
â˘ You may not be able to access some e-site services due to system maintenance, etc.
Do not forget your FOMA terminal ... or your manners!
In the following cases, be certain to turn off the power.
â Where use is prohibited
Be sure to turn off the power to your FOMA terminal in airplanes and in hospitals.
âťPersons with electronic medical equipment are in places other than the actual wards.
Make sure you have the power switched off even if you are in a lobby or waiting room.
â When in crowded places such as packed trains, where you could be near
a person with an implanted cardiac pacemaker or implanted defibrillator
The implanted cardiac pacemaker or implanted defibrillator operation can be
affected by radio emissions from the FOMA terminal.
In the following cases, be certain to set Public Mode.
â While driving
Using the mobile phone in your hand while driving is subject to punishment.
âťIf you answer a call out of necessity, tell the caller with Hands-free that you will call
him/her back, park your car to somewhere safe, and then dial.
â When in theaters, movie theaters, museums, and similar venues
If you use your FOMA terminal where you are supposed to be quiet, you will
disturb those around you.
Adjust the volume of your voice and ring tone according to where you are.
â If you use the FOMA terminal in quiet places such as restaurants and
hotel lobbies, keep the volume of your voice and other sounds down.
â Do not block thoroughfares when using the FOMA terminal.
Respect the privacy.
Please be considerate of the privacy of individuals around you when
shooting and sending photos using camera-equipped mobile phones.
These functions help you keep your manners in public.
Handy functions are available such as for setting the response
to incoming calls and setting the tones to silent.
âPublic Mode (Drive Mode/Power Off) (Page 69 and page 70)
The guidance that you are currently driving or in a place where you
should refrain from using a mobile phone or the guidance that you
are in a place where you should turn off the power is played back to
the caller. Then the call is disconnected.
âRecord Message function (Page 71)
Callers can record a message when you cannot come to the phone.
âVibrator (Page 108)
When the vibrator is set, it vibrates for incoming calls.
âManner Mode/Super Silent/Original Manner (Page 110)
In Manner Mode or Super Silent, the keypad sound, ring tone and
other sounds from the FOMA terminal are muted.
In Original Manner, you can set whether or not to activate the Record
Message function, and can change the settings for the vibrator and
ring tone.
âťThe shutter sound cannot be muted.
Optional services are also available, such as Voice Mail Service
(page 440) and Call Forwarding Service (page 444).
This manual was produced in such a way as to allow easy recycling. Please recycle
this manual when it is no longer needed.
General inquiries
Repairs

â From DOCOMO mobile phones
(In Japanese only)
0120-005-250 (toll free)
â
â
Service available in English, Portuguese, Chinese, Spanish, and Korean.
Available from mobile phones and PHSs.
â From DOCOMO mobile phones
(In Japanese only)
Unavailable from land-line phones, etc.
(No prefix)113 (toll free)
â From land-line phones
(In Japanese only)
(No prefix)151 (toll free)
â
â From land-line phones
(In Japanese only)
â
Unavailable from land-line phones, etc.
0120-800-000 (toll free)
â
Available from mobile phones and PHSs.
0120-800-000 (toll free)
â
Available from mobile phones and PHSs.
â˘ Please confirm the phone number before you dial.
â˘ For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the
i-mode site.
Loss or theft of FOMA terminal or payment of cumulative cost overseas
Failures encountered overseas
(available 24 hours a day)
(available 24 hours a day)
â From DOCOMO mobile phones
International call access code for
the country you stay (Table 1)
â From DOCOMO mobile phones
-81-3-5366-3114* (toll free)
* You are charged a call fee to Japan when calling from a landline phone, etc.
International call access code for
the country you stay (Table 1)
-81-3-6718-1414* (toll free)
* You are charged a call fee to Japan when calling from a landline phone, etc.
âťIf you use P-01A, you should dial the number +81-3-5366-3114
(to enter â+â, press and hold the â0â key for at least one second).
âťIf you use P-01A, you should dial the number +81-3-6718-1414
(to enter â+â, press and hold the â0â key for at least one second).
â From land-line phones ďźUniversal numberďź
â From land-line phones ďźUniversal numberďź
International prefix number for
the universal number (Table 2)
-800-0120-0151*
* You might be charged a domestic call fee according to the call rate for the country you stay.
âťSee page 462 and page 463 for international call access codes for major countries (Table 1)
and international prefix numbers for the universal number (Table 2).
-800-5931-8600*
* You might be charged a domestic call fee according to the call rate for the country you stay.
âťSee page 462 and page 463 for international call access codes for major countries (Table 1)
and international prefix numbers for the universal number (Table 2).
âIf you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal.
âIf the FOMA terminal you purchased malfunctions, bring your FOMA terminal to a repair counter specified by DOCOMO after you return to Japan.
Donât forget your mobile phone ... or your manners!
When using your mobile phone in a public place, donât forget to show common courtesy and consideration for others around you.
Sales:
Manufacturer:
INSTRUCTION MANUAL
International prefix number for
the universal number (Table 2)
P-01A
NTT DOCOMO website http://www.nttdocomo.co.jp/english/
i-mode site ď˝Menu 1 ăĺŽ˘ć§ăľăăźă (user support) 1 ăăłă˘ăˇă§ăă (docomo Shop) (In Japanese only)
November â08 (1st Edition)
This manual is printed using
an ink based on soy bean oil.
3TR100101AAA
F1008F0- A
â08.10
To prevent damage to the environment, bring used
battery packs to an NTT DOCOMO service counter,
an NTT DOCOMO agent or a recycle center.
Easy Search/Contents/Precautions
Viewing/Searching This Manual
The operating procedures and displays in this manual are described with the default
settings of the âFrosty Whiteâ (see page 476) handset mainly. However, the following
settings are changed.
ăťâDisplay settingâ â âStand-by display/Stand-by disp. Wideâ: OFF
ăťâDisplay settingâ â âClockâ â âStand-by clock/Stand-by clock Wideâ â âPositionâ:
Pattern 1
ăťâDisplay settingâ â âBattery icon/Antenna iconâ: Pattern 1
ăťâMenu icon settingâ: Visual
The operating procedures and displays in this manual are described with Normal Style
mainly.
Displays and illustrations described in this manual are for reference. The actual ones
might differ.
In this manual, âOsaifu-Keitai compatible i-Îąppli which supports the IC card functionâ is
described as âOsaifu-Keitai compatible i-Îąppliâ.
Note that âP-01Aâ is referred to as âFOMA terminalâ in this manual.
In the operating procedures of this manual, key operations are described with
simplified key icons.
The functions which use a microSD card are described in this manual; however, you
need to obtain a microSD card separately to make these functions available. See
page 370 for the microSD card.
From the Index
Search from the index when you know the names of functions or services.
From Easy Search
Search from keywords for the functions you frequently use or the functions that are
convenient if you can know any.
From the Tabs on the Cover
Search from the tabs printed on the cover.
See the next page for details.
From the Contents
P.6
Search from the contents that categorize functions.
From the Main Functions P.8
Search from here to use the main functions.
From the Function List
P.476
Search from the function list.
From Quick Manual
P.550
Quick Manual gives you a clear, brief description about basic functions. You can take it
when you go out. Further, Quick Manual âFor Overseas Useâ is attached, so refer to it
when you use the FOMA terminal overseas.
It is prohibited to copy all or part of this manual without permission.
The instructions contained in this manual may be changed without notice.
Easy Search/Contents/Precautions
In this manual, illustrations and symbols are used in the explanations so
that you can correctly and easily use the FOMA terminal.
How to Refer to This Manual
By the following search methods, you can find pages where your desired
functions and services are described:
Easy Search/Contents/Precautions
How to search for âAlarmâ is explained here as an example of search method.
From the Index
P.542
Additional guidance . . . . . . . . . . .457
Address link function. . . . . . . . . . . .207
After-sales services. . . . . . . . . . . . .519
Alarm. . . . . . . . . . . . . . . . . . . . . . . .404
Alarm setting . . . . . . . . . . . . . . . . . .413
Answer setting . . . . . . . . . . . . . . . . .66
Antenna. . . . . . . . . . . . . . . . . . . . . . .23
Search for a function or a service
name as shown on the right.
Other things you can do
From Easy Search
To reduce the battery consumption .............................. 116
P.4
To scan QR codes or bar codes ...................................... 248
To listen to music.................................................................. 280
To check your location and surroundings ...................... 328
To use the microSD card ...................................................... 370
To exchange information using infrared rays......... 384
Search for the function you
frequently use or that is
convenient if you know any as
shown on the right.
To use the FOMA terminal as an alarm clock..................................... 404
To use the FOMA terminal as a calculator .................................. 417
To use the FOMA terminal overseas ........................ 460
To update software programs........................................... 521
From the Tabs on the
Cover
Osaifu-Keitai/ToruCa
Cover page
Convenient Functions
Music
i-Îąppli/i-Widget
Map/GPS Function
Search for the function you want
to set in the order of âCoverâ
â âFirst page of Chapterâ
â âDescription pageâ as shown
on the right.
Data Management
Character Entry
Network Services
Overseas Use
PC Connection
Appendix/Troubleshooting
Multitask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Informing You of an Incoming Call/Mail Message by Voice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning Power On/Off Automatically at a Specified Time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Calendar to Manage Schedule . . . . . . . . . . .
Using ToDo to Manage Schedule . . . . . . . . . . . . . . . . .
Setting Operating Conditions of Alarm . . . . .
401
402
404
404
407
411
413
Go to page 404
where âAlarmâ
is explained.
Menu number
(See page 36)
+m-4-4

Using Alarm
You can set Alarm to alert you at the specified time with an alarm tone,
animation and illumination. You can store up to twelve alarms.
Operating
procedure
(See page 34)
mStationeryAlarm
Highlight an alarm and press
l(
Do the following operations.
Reference display
(Characters and settings
Alarm
are for reference.)
Chapter title
You can
search by
chapter.
Convenient Functions
Time
Options and their
explanations
You can set whether to validate or invalidate the alarm.
ON or OFF
Enter the time for sounding the alarm.
pYou cannot set the same time as the time set for the stored
alarm.
Select a type of alarm toneSelect a folder
Select an alarm tone.
Volume
Use Bo to adjust the volume.
pIf you set âStepâ, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
Press l(
Function Menu while Alarm is Displayed
Edit
Go to step 1 of âUsing Alarmâ on page 404.
Detail
You can display the stored alarm contents.
Set this
You can validate the stored alarm.
YES
pYou can validate also by pressing Oo(
Set all
You can validate all the stored alarm.
YES
).
Delete
Tone
Prefer manner
mode
Items shown on the
display
(Some items cannot
be executed.)
You can set the alarm tone which sounds at the specified time
during Manner Mode.
ON or OFF
ON. . . . . Sounds at the same volume as set for âAlarm volumeâ.
OFF. . . . Sounds at the volume set for this function.
Delete this
YES
Delete all
Enter you Terminal Security CodeYES
Information
pDuring a call, the alarm tone sounds at the level set for âVolumeâ (earpiece volume).
pWhen you set the power to automatically turn on and an alarm to sound, the default
alarm tone sounds if the alarm with the UIM security is selected.
pTurn off the FOMA terminal after setting âAuto power ONâ to âOFFâ when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for âAlarmâ, âScheduleâ, and âToDoâ
The icon appears on the desktop.
â
â . . . Displayed when an alarm is set for today (except the setting for past time).
â
â . . . Displayed when an alarm is set for tomorrow or onward only.
pIf you set âAlarmâ of the stored schedule event/ToDo item to âOFFâ, the icons are not
displayed.
Operation and
supplementary
explanation for each
item
Lower sub-menu item
of the Function menu
Cautions or
references for using
each function
Operations related to
the function and
explanations for
supplementary
operations
).
404
Note: The page above is a sample.
Easy Search/Contents/Precautions
Function name
You can find this in
Index.
Easy Search/Contents/Precautions
Easy Search
To retrieve a desired function with simple words, refer to the following:
To know convenient functions for making calls
To change/know display settings
To/Not to notify your phone number to the other party
....................................................................................
To know the meaning of marks (icons) on the display .....................
48
To switch to a videophone call during a voice call
28
To change the Stand-by display (Wallpaper) ...................... 113
To display a calendar on the Stand-by display .............................. 113
...........................................................................
53
To change the menu display .................................................. 118
To change a volume level of the other partyâs voice .......................
67
To change the character size ............................................... 123
To put a call on hold during a call....................................................
68
To make full use of mail
To do the following when you cannot answer calls
To send Deco-mail ...................................................................... 150
To put an incoming call on hold before answering .........................
68
To convey the message that you need to refrain from talking on the phone
..................................................................... Using Public Mode (Drive Mode)
To send images ....................................................................... 157
To sort and save mail automatically .............................................. 176
69
....................................................................... Using Public Mode (Power Off)
70
To record voice/video messages..........................
71
To make full use of camera
To change the shooting size...................................................... 244
To change melody or illumination
To save to the microSD card ........................................................... 245
To display shot images......................................................... 346
To adjust the ring volume ........................................................
68
To change ring tones according to callers......................
90
To change ring tones........................................................
Configuring Initial Setting . . . . . . . . . . . . . . . . .
Setting Date and Time . . . . . . . . . . . . . . . . . . . . . . .
Displaying World Time . . . . . . . . . . . . . .
Notifying the Other Party of Your Phone Number
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking Your Own Phone Number . . . . . . . .
22
24
25
26
28
30
33
33
33
34
38
39
41
42
44
45
45
46
46
47
48
48
21
Part Names and Functions
Before Using the Handset

The key design in Normal style differs from the one in
Horizontal Open Menu.
â For inserting or pulling the Flat-plug Earphone/Microphone with Switch (option)
Take hold of the plug and insert or pull it straight into or out. Be careful not to take
hold of the cover and plug together when you pull it out.
Plug
22
Light sensor
ăťFor sensing brightness (See page 116)
Do not cover the light sensor with your hands or do
not put a sticker on it. Doing so might disable you to
detect the brightness.
ăťFor shooting photos of yourself (See page 236)
ăťFor catching sight of yourself during a videophone call
x Multi key
Earpiece
ăťFor listening to the other partyâs voice
Private window
(See page 33)
Display
(See page 28)
Call/Charging indicator
ăťFlickers for incoming calls/mail and during a call.
(See page 120)
ăťLights in red during charging.
ăťLights/Flickers when you shoot with the camera.
The flickering pattern and color tone of the illumination
might look different depending on the type of the
FOMA terminal you use.
!Strap hole
Outside camera
ăťFor shooting portraits and/or landscapes
(See page 236)
ăťFor catching sight of persons and/or landscapes
during a videophone call
$One-push open button
(See page 24)
m Menu key
r Clear key/i-Widget key
ăťFor returning to the previous operation
ăťFor clearing entered text or a phone number
d Start key, Hands-free key
ăťFor making/receiving calls (See page 50 and page 64)
ăťFor talking with Hands-free (See page 63)
Microphone
ăťFor speaking to the other party
Inside camera
o Command navigation key
i i-mode key/i-Îąppli key
c Camera key/1Seg key
h Power/End key
ăťFor ending calls
ăťFor ending respective functions
ăťFor turning on the power (for at least one second)/
For turning off the power (for at least two seconds)
(See page 45)
Numeric keys
ăťFor entering phone numbers and text
Connector terminal
ăťFor connecting the AC adapter (option), DC adapter
(option), or FOMA USB Cable with Charge Function
01/02 (option)
Infrared data port
ăťUsed for infrared communication and the infrared
remote control. (See page 384 and page 388)
FeliCa mark
ăťThe IC card is mounted.
Use the IC card function placing this mark over the
scanning device. You cannot dismount the IC card.
(See page 317)
FOMA antenna/1Seg antenna
The antenna is embedded in the FOMA terminal. Do
not cover the antenna with your hand for better
communication/receiving.
microSD card slot
ăťFor inserting microSD card (See page 370)
Back cover
ăťRemove this when attaching/removing the battery
pack and UIM. (See page 39 and page 41)
Do not peel off the sticker on the back of the back
cover. If you peel it off, you might not be able to read
and write the IC card.
Charging terminal
"Earphone-Microphone/AV output terminal
(See page 396 and page 419)
#p PushTalk key
ăťFor making/receiving PushTalk calls
(See page 80 and page 83)
%< Side â˛ key
ăťFor scrolling up page by page
&> Side âź key
ăťFor scrolling down page by page
ăťFor checking for missed calls and new mail
(See page 121)

ăťFor activating Manner Mode (See page 110)
'Horizontal open lever
(See page 24)
Speakers
ăťFor sounding ring tones
ăťFor listening to the other partyâs voice when
Hands-free is activated (See page 63)
23
Before Using the Handset
l Mail key/f Full Browser key
Hook for Horizontal Open Style
Before Using the Handset
Styles
The P-01A comes with two styles.
â Normal Style
You can open the FOMA terminal easily by one-push key operation.
(One-push Open)
You can open it also manually without using the button.
You need to close the FOMA terminal manually. If it does not close, open it fully and
then close it.
One-push open button
Information
When you open the FOMA terminal by pressing the one-push open button, be careful
not to drop it by its rebound.
When you press the one-push open button in Horizontal Open Style, the FOMA
terminal will open in Normal Style after it is closed.
Before switching the styles, be sure to completely close the FOMA terminal. If you
operate the horizontal open lever in Normal Style or with the display part unlatched,
malfunction or damage may result.
When the confirmation display to select âYES/NOâ is shown and you switch the style,
the confirmation display may be cleared.
Work with Style
You can set which operation starts for when you switch to Horizontal
Open Style from the Stand-by display.
â Horizontal Open Style
Hold down the part A and open the display part with the horizontal open
lever slid into the direction B. From the horizontal display, you can use
1Seg, Full Browser, and others.
If the latch is not in a state of C when you open the display, re-open the FOMA terminal
after closing it once.
Horizontal open lever
Information
When you open the FOMA terminal by pressing the one-push open button, it might
not open fully depending on its direction.
24
mSet./ServiceOther settingsWork with style
Select an item.
Horizontal open menu . . .Shows Horizontal Open Menu. (See page 36)
1Seg . . . . . . . . . . . . . . . . . .Activates 1Seg. (See page 255)
Camera . . . . . . . . . . . . . . . .Activates the camera in Photo Mode. (See page 239)
OFF . . . . . . . . . . . . . . . . . . .Shows the Stand-by display (wide). (See page 113)
Information
When you switch styles from Main Menu or Horizontal Open Menu, the Stand-by
display appears regardless of the setting of this function.
Navigation Displays and Key Operations
Key Operations in Normal Style
â Basic display examples and key assignments
Zo
Vo
ăťMoves the cursor or highlighted
display up. (Press and hold to scroll
continuously.)
ăťScrolls the page up.
ăťMoves the cursor to the right.
ăťScrolls forward page by page.
(Press and hold to scroll
continuously.)
Co
Xo
ăťMoves the cursor to the left.
ăťScrolls back page by page. (Press
and hold to scroll continuously.)
ăťMoves the cursor or highlighted
display down. (Press and hold to
scroll continuously.)
ăťScrolls the page down.
Oo
ăťFixes the operation.
Key Operations in Horizontal Open Style
Indicates the operation you can perform with
the l key.
Indicates the operation you can perform with
the m key.
While the vertical display is shown, you
can operate in the same way as in
Normal Style.
While the horizontal display is shown,
press the corresponding key on the
right.
Indicates the operation you can perform with
the Oo key.
Indicates the direction in which you can scroll
and select items with the Mo key.
Indicates the operation you can perform with
the c key.
Indicates the operation you can perform with
the i key.
25
Before Using the Handset
When you want to execute the operation shown on the display in Normal
Style, press the corresponding key as below.
â Operating command navigation key
Before Using the Handset
Main Key Operations from the Stand-by
Display
From the vertical Stand-by display in Normal Style or the horizontal
Stand-by display in Horizontal Open Style, you can execute the following
actions by operating the each key:
Key operation
Action in Normal Style
(on the vertical display)
Action in Horizontal Open Style
(on the horizontal display)
Shows the display for selecting
Shows the display for selecting
the icons on the Stand-by
for a short time
the notification icons.
display, etc. (See page 32,
(See page 32, page 70)
+O
page 70, page 113)
for at least one
Sets/Releases Key Lock. (See page 135)
second
for a short time
+Zo
26
Shows the Mail menu.
(See page 166)
+f
âť
for at least one Executes Check New
second
Message. (See page 161)
Shows the Full Browser
Function Selection display.
(See page 220)
Shows the Internet web page
set as Home URL by Full
Browser. (See page 220)
Shows the i-mode menu.
Shows the Software list.
+i for a short time (See page 194)
(See page 293)
+= for at least one
Shows the Software list. (See page 293)
âť
second
Shows Main Menu.
Shows Horizontal Open Menu.
+m for a short time (See page 34)
(See page 36)
+~ for at least one
Sets/Releases IC Card Lock. (See page 318)
âť
second
Shows the Search Phonebook
display. (See page 96)
â
for a short time Makes a call. (See page 50)
â
â
-d for at least one Accesses a voice dial entry.
second
(See page 102)
â
Shows the Received Call list.
(See page 55)
â
-h
for at least one Shows the Received Address
second
list. (See page 175)
â
for a short time
+Vo
for a short time
Action in Horizontal Open Style
(on the horizontal display)
+c for at least one
Starts 1Seg. (See page 255)
second
â
Shows the registration display
for at least one
for the Phonebook entries.
second
(See page 90)
for a short time
+Co
â
+l
Action in Normal Style
(on the vertical display)
for a short time Activates the camera in Photo Mode. (See page 239)
for at least one
second
for a short time
+Xo
Shows the Channel list.
(See page 214)
Key operation
Shows the Redial list.
(See page 54)
for at least one Shows the Sent Address list.
second
(See page 175)
for a short time
â
for at least two
Turns off the power. (See page 45)
seconds
Executes i-Widget.
+r for a short time (See page 312)
+| for at least one Resets Main Menu.
âť
â
Sets whether to display the icons on the Stand-by display.
(See page 114)
second
(See page 119)
â
â
Key operation
Action in Normal Style
(on the vertical display)
Action in Horizontal Open Style
(on the horizontal display)
for a short time Enters â0â.
â
â
for a short time Enters â1â.
â
â
â
for a short time
-3 for at least one Enters â3â.
second
for a short time Enters â:â.
â
-a for at least one Activates/Deactivates Public Mode (Drive Mode).
second
(See page 69)
for a short time Enters â#â.
â
-s for at least one
Activates/Deactivates Manner Mode. (See page 110)
second
â
Shows the display for setting
Select Networks.
-x for at least one
(See page 465)
second
Switches menu functions.
(See page 402)
for a short time
for a short time
-4 for at least one Enters â4â.
second
â
for a short time Enters â5â.
â
.<
-5 for at least one
Switches the backlight on/off. (See page 116)
second
.>
for a short time
-6 for at least one Enters â6â.
second
Action in Horizontal Open Style
(on the horizontal display)
for a short time Shows the Multitask Menu. (See page 402)
for a short time
-2 for at least one Enters â2â.
second
Action in Normal Style
(on the vertical display)
Before Using the Handset
-0 for at least one
Enters â+â.
second
-1 for at least one Measures your current location
and executes the GPS
second
function. (See page 328)
Key operation
â
for a short time
â
for a short time Enters â8â.
â
-8 for at least one
Switches View Blind on/off. (See page 117)
second
.p
Switches between the i-Îąppli
Stand-by display and normal
i-Îąppli program.
(See page 311)
â
for at least one
Activates 2in1. (See page 450)
second
â
Plays back a record message/
for a short time
voice memo. (See page 72)
â
Plays back a videophone
for at least one
record message/movie memo.
second
(See page 73)
â
Shows the PushTalk
Phonebook list. (See page 84)
â
for a short time
-7 for at least one Enters â7â.
second
Switches menu functions.
(See page 402)
for at least one
Activates MUSIC Player (See page 281)
second
âťIn this manual, each key is described with l, i, m, and r regardless of the
style.
for a short time
-9 for at least one Enters â9â.
second
â
27
Viewing Display
Before Using the Handset

Battery level (estimate) (See page 44)
Unread Messages R/F exist.
(See page 181)
Radio waves reception level (estimate)
(yellow)
Strong
(dark blue) terminal is full. (See page 182)
During measuring the current location
(See page 328)
Location Request Menu is set to âONâ or
âReject numbers unsetâ, and it is within the
validity period. (See page 340)
The area for Messages R/F in the FOMA
Weak
You are out of the FOMA service area or
radio waves do not reach.
(pink)
During Self Mode (See page 130)
During i-mode communication (See page 194)
(yellow)
During packet communication (The icon differs
depending on the communication status.)
i-mode mail is held at the i-mode Center
while Receive Option Setting is set to âONâ.
(See page 160)
During SSL communication (See page 195)
New i-concier information exists.
(See page 216)
The area for i-mode mail and SMS
(dark blue) messages in the FOMA terminal is full.
(See page 159 and page 191)
The area for SMS messages on the UIM
(FOMA card) is full.
(pink)
Unread mail exists, and the area for SMS
messages on the UIM (FOMA card) is full.
Both the FOMA terminal and UIM (FOMA
(dark blue) card) are full.
Area Mail exists. (See page 184)
28
A microSD card is inserted.(See page 371)
Messages R/F are held at the i-mode
Center. (See page 182)
You get out of the service area while
Network Search Mode is set to âManualâ.
(See page 465)
Unread i-mode mail or an SMS message
exists. (See page 159 and page 191)
Location Request Menu is set to âONâ or
âReject numbers unsetâ and it is out of the
validity period. (See page 340)
Data is being read to/written from the
microSD card.
The box for Messages R/F at the i-mode
(dark blue) Center is full. (See page 182)
During PushTalk communication (See page 80)
(pink)
i-mode mail is held at the i-mode Center.
(See page 161)
The box for i-mode mail at the i-mode
(dark blue) Center is full. (See page 159)
During i-mode (See page 194)
A write-protected microSD card is inserted.
(See page 371)
The inserted microSD card cannot be used.
(See page 371)
A microSD card is inserted, and the FOMA
USB Cable with Charge Function 01/02
(option) is connected in microSD Mode.
(See page 379)
Not replied i-Îąppli call exists.
(See page 309)
A microSD card is inserted, and the FOMA
USB Cable with Charge Function 01/02
(option) is connected in MTP Mode.
(See page 379)
During a voice call
During a videophone call
During 64K data communication
(blue)
A Bluetooth device is connected.
(See page 424 and page 426)
(black)
A Bluetooth device is connected and power
consumption is low. (See page 424)
During Lock All (See page 128)
During recording of a 1Seg program by
Timer Recording (See page 266)
During Personal Data Lock (See page 131)
During Keypad Dial Lock (See page 135)
During music pause (See page 281)
Both IC Card Lock and Lock All are set.
Both IC Card Lock and Personal Data Lock
are set.
Both IC Card Lock and Keypad Dial Lock
are set.
Both IC Card Lock and Secret Mode/Secret
Data Only are set.
Vibrator is set. (See page 108)
Type of in-use network (See page 461)
Ring Volume is set to âSilentâ or
Mail/Msg. Ring Time is set to âOFFâ.
(See page 68 and page 109)
During Manner Mode (See page 110)
You are in the OFFICEED area.
(See page 456)
Remote Monitoring is set to âONâ.
(See page 79)
Timer Lock ON At Close is set.
(See page 131)
During Public Mode (Drive Mode)
(See page 69)
During Key Lock. (See page 135)
The call cost has exceeded the specified
limit. (See page 417)
An alarm is set.
(See page 266 and page 405)
A Music&Video Channel program is booked.
(See page 272)
During Multitask (See page 401)
Multiple functions are activated.
(See page 401)
During talk or communication through a
USB Hands-free compatible device
(See page 63)
IC Card Lock, Keypad Dial Lock, and Secret
Mode/Secret Data Only are simultaneously
set.
While watching a 1Seg program
(See page 255)
USB Mode Setting is set to âmicroSD
modeâ. (See page 379)
A USB Hands-free compatible device is
connected in microSD Mode. (See page 63)
Side Keys Guard is set to âONâ.
(See page 135)
The FOMA USB Cable with Charge
Function 01/02 (option) is connected in
microSD Mode. (See page 379)
A USB Hands-free compatible device is
connected. (See page 63)
IC Card Lock, Keypad Dial Lock, and
Personal Data Lock are simultaneously set.
During infrared communication
(See page 384 and page 388)
The FOMA USB Cable with Charge
Function 01/02 (option) is connected in
Communication Mode.
Both Keypad Dial Lock and Secret Mode/
Secret Data Only are set.
Backlight is set to âOFFâ and View Blind is
set to âONâ.
During music playback (See page 281)
During IC Card Lock (See page 318)
Both Keypad Dial Lock and Personal Data
Lock are set.
View Blind is set to âONâ. (See page 117)
During pause of 1Seg program recording
(See page 263)
USB Mode Setting is set to âMTP modeâ.
(See page 379)
âź
ăť Voice mail messages for Number B are held
at the Voice Mail Center in Dual Mode of
2in1. (See page 455)
âź
ăť Voice mail messages are held at the Voice
Mail Center. (See page 440)
âź
The number of record messages
(See page 71)
âź
The number of videophone record
messages (See page 71)
For the horizontal display, icons appear at the lower right
of the display.
The clock at the upper right of the display (at the lower
right of the horizontal display) does not appear when the
icon or is displayed.
Information
Some characters and symbols on the display and
Private window might be modified or abbreviated. In
addition, the Private window is displayed in
monochrome.
The color liquid crystal display uses high-precision
production technology. The slightest change in the
environment or other factors may result in unlit or
permanently lit pixels, but this is not a manufacturing
defect.
During recording of a 1Seg program
(See page 262)
29
Before Using the Handset
During Secret Mode or Secret Data Only
(See page 136)
Backlight is set to âOFFâ. (See page 116)
Missed call to Number B of 2in1
Shows the Missed Call list. (See page 55)

Before Using the Handset
Using Icons on Desktop
Status icon
Record message
Shows the Record Message list. (See page 72)
Notification icon
Desktop icon
â Operation when a status icon is selected
Shows the display for Vibrator. (See page 108)
Shows the display for Ring Volume. (See page 68)
Shows the display for Manner Mode Set. (See page 112)
Videophone record message
Shows the Videophone Record Message list. (See page 73)
New i-mode mail or SMS
Shows the Inbox list. (See page 164)
New chat mail
Starts Chat Mail. (See page 188)
New Message R/F
Shows the Message R/F list. (See page 182)
Shows the display for Remoto Monitoring. (See page 79)
Shows the display for releasing Public Mode (Drive Mode). (See page 69)
Shows the display for Notice Call Cost. (See page 417)
i-Îąppli did not start automatically
Shows the i-Îąppli Auto Start Info. (See page 308)
Shows the list of Alarm, Schedule, ToDo, TV Timer, or Timer Recording.
(See page 263, page 264, page 404, page 407 or page 411)
Not replied i-Îąppli call
Shows the i-Îąppli Call Logs diaplay. (Seepage 310 )
Shows the Music&Video Channel display. (See page 272)
A ToruCa file is received from a scanning device
Shows the ToruCa File list. (See page 322)
Shows the display for Backlight. (See page 116)
Shows the display for View Blind. (See page 117)
Shows the display for âSet./Serviceâ â âDisplayâ.
Shows the display for Side Key Guard. (See page 135)
Shows the display for USB Mode Setting. (See page 379)
âź
âź
ăť
Shows the display for playing back Voice Mail messages.
(See page 441)
ăť
Shows the display for playing back Voice Mail messages.
(See page 441)
âź
Shows the display for Rec. Msg/Voice Memo.
(See page 71, page 72, page 108 and page 415)
âź
Shows the display for Rec. Msg/Voice Memo.
(See page 71, page 72, page 108 and page 415)
â Operation when a notification icon is selected
Missed call
Shows the Missed Call list. (See page 55)
30
A security error occurred on the i-Îąppli Stand-by display
Shows the Security Error History. (See page 295)
Success in downloading a Music&Video Channel program
Activates Music&Video Channel. (See page 272)
Failure in downloading a Music&Video Channel program
Activates Music&Video Channel. (See page 273)
Missed alarm
Shows the contents of the alarm that could not be notified. (See page 407)
Missed TV timer
Shows the contents of the TV timer that could not be notified.
(See page 267)
Timer recording was completed
Shows the contents and results of the timer recording. (See page 267)
Messages are held at the Voice Mail Center
Shows the display for playing back Voice Mail messages. (See page 441)
Shows it on the PDF viewer.âť (See page 390)
The Phonebook could not be updated by Data Security Service
Shows the update display for Data Security Service. (See page 141)
Shows it on the ToruCa viewer.âť (See page 320)
Provide Location was executed automatically
Shows Location History. (See page 337)
Shows the Private menu. (See page 413)
Shows the Ir Data Receiving display. (See page 386 and page 387)
Shows the Camera menu. (See page 239 and page 241)
You did not respond to a location provision request
Shows Location History. (See page 337)
Shows the Bluetooth Function Selection display.
(See page 424, page 426, and page 428)
Software Update is needed
Starts Software Update. (See page 524)
Starts Voice Recorder. (See page 389)
Software Update was executed
Shows the Update Completion display or the reason for not completing.
(See page 523)
Shows the i-concier menu display. (See page 216)
Shows the list of Alarm. (See page 404)
Shows the Calendar display. (See page 408)
Software rewriting is possible
Shows the rewriting confirmation display. (See page 522)
Shows the ToDo list. (See page 411)
Pattern data was updated automatically
Shows the updated result. (See page 528)
Shows the list of Text Memo. (See page 417)
Shows the calculator. (See page 417)
The FOMA terminal and a personal computer are connected by the FOMA
USB Cable with Charge Function 01/02 (option)
Shows the display for USB Mode Setting. (See page 379)
Shows the display for ä˝żăăăăă (Guide). (See page 38)
Starts MUSIC Player. (See page 280)
â Operation when a desktop icon is selected
Shows the Music&Video Channel display. (See page 274)
Shows the dialing display with the phone number entered.
(See page 50 and page 80)
Shows the site of that URL. (See page 194)
Shows the site of that URL by Full Browser. (See page 220)
Shows the Message Composition display with the mail address entered.
(See page 146)
Shows the SMS Composition display with the mail address entered.
(See page 190)
Starts the i-Îąppli program.âť (See page 293)
Shows it on the Picture
viewer.âť
(See page 346)
Plays it back by the i-motion player.âť (See page 353)
Plays it back by the Video
player.âť
(See page 360)
Before Using the Handset
Shows the Bar Code Reader menu. (See page 248)
Provide Location could not be executed automatically
Shows Location History. (See page 337)
Shows the Viewer display. (See page 255)
Starts i-Îąppli Program Guide. (See page 260)
âť When the original data is deleted or overwritten, the desktop icon is disabled.
Paste Icons to Desktop
You can paste up to 15 desktop icons of such as phone numbers, mail
addresses, etc.
The display for an item to be pasted i(
Add desktop iconYES
When the addresses of the sender and another recipient of simultaneous mail are
found or the multiple destination addresses are found, select a mail address or
phone number to be pasted.
Plays it back by the Chara-den player.âť (See page 363)
Plays it back by the Melody player.âť (See page 366)
31
Before Using the Handset
Information
You may not be able to paste the URL to the desktop depending on the site.
You can store the title for URL of up to 16 full-pitch/32 half-pitch characters. When the
number of characters for the title exceeds that much, the characters in excess are
deleted. If no title exists for a site, up to 22 half-pitch characters of the URL excluding
âhttp://â or âhttps://â is displayed.
Some files and data might not be pasted to the desktop.
Proceed to Respective Functions from Icons on Desktop
PressOo.
The list of desktop icons pasted to the desktop is
displayed.
Desktop Icon list
Select the icon whose details are to be displayed.
You can show the Function menu also by pressing i(
icon from the Stand-by display.
).
Up to five âDesktop iconsâ
are displayed. If there are
six or more icons, â â and
â â are displayed.
A âNotification iconâ is
deleted when each function
When a record message
is executed. To delete all
icon is selected
âNotification iconsâ, press
and hold r for at least one second from the display in step 1.
When the notification icon of âMessages are held at the Voice Mail Centerâ (
appears while you are overseas, you cannot operate the Voice Mail function from the
notification icon. Follow the steps of âOperate Voice Mail Service at the Country You
Stayâ on page 468.
), while highlighting an
Add to desktop
Put a check mark for the function to be added
l(
Edit title
Enter a title.
You can enter up to 16 full-pitch/32 half-pitch characters.
However, the number of characters for the title displayed when
you highlight the icon is up to 11 full-pitch/ 22 half-pitch
characters from the beginning of the title.
Sort
Select a desktop iconUse Bo to change the order
Oo(
To change the order in succession, repeat the above steps.
l(
Information
32
+m-6-3
Function Menu of the Desktop Icon List
Desktop icons are not displayed on the horizontal
Stand-by display. Further, you cannot select status
icons by pressing Oo.
Use Mo to highlight an icon, and press Oo(
Check Details of Desktop Icon
mSet./ServiceDisplay
Desktop icon
)YES
Reset desktop
The desktop icons are reset to the default.
YES
Delete this
YES
Delete all
YES
When a missed call is found
i-Widget Display and Operations
You can simultaneously start multiple Widget Îąppli programs, and can
display as Widget Îąppli list on the i-Widget display.
When a new mail message or Message R/F is received
i-Widget display
+m-3-6

Displaying Description of Icons
The symbols on the display (such as , , and
can check the meanings of them on the display.
) are called icons. You
m1Set./Service1Display1Icons
1Use Mo to highlight an icon.
Private Window
Various information is displayed on the Private window like the following
examples:
Information is displayed for about 15 seconds in cases such as when you
press or p with the FOMA terminal closed.
Clock
Dialing
Receiving a call
During a voice call
When the FOMA terminal is closed, a FeelďźMail image is played
back, and then âNew mailâ appears.
When you press <, the latest FeelďźMail image is played back.
(For Messages R/F, the FeelďźMail image is not played back.)
When âMailâ on page 115 is set to âONâ, the received date/time,
senderâs address (name), and subject of the mail or the received
date/time and subject of the Message R/F are displayed. The
senderâs name is displayed for the mail coming from the party
stored in the Phonebook. When multiple mail messages or
Messages R/F are received, up to three mail messages or
Messages R/F appear each time you press < with âNew mailâ
displayed.
âĽPress < to end the playback of the FeelďźMail image or to clear the received date/
time, and others.
âĽFor the mail messages and Messages R/F sorted to the box or folder with security set,
the FeelďźMail images, received date/time, and others are not played back/displayed.
âĽWhen a mail message or Message R/F comes in while âReceiving displayâ is set to
âOperation preferredâ and a display other than the Stand-by display is shown, âNew
mailâ appears without showing any information.
âĽDepending on the setting of âAuto-displayâ, âNew mailâ appears without showing any
information when a Message R/F comes in.
âĽAfter you display the received date/time and others of the received mail or Message
R/F, âNew mailâ disappears.
âĽWhen a mail message or Message R/F comes in during a voice call or a videophone
call, information is not displayed even when âReceiving displayâ is set to âAlarm
preferredâ.
âĽWhen you set âSecret mail displayâ to âOFFâ and you receive a secret mail message in
Normal Mode, a FeelďźMail image is not played back.
33
Before Using the Handset
1Widget Îąppli
Widget Îąppli that is already starting is displayed.
If you select a Widget Îąppli program, you can display it
individually.
2Navigation displays
Navigation that corresponds to the button operation is
displayed.
âĽIf you press i[ăˇăŁăăăŤ (Shuffle)] on the i-Widget
display, you can randomly change the indication order
of Widgt Îąppli.
âĽSee P.312 for detailed operations of i-Widget.
When the FOMA terminal is closed, âMissed callâ appears.
Press < to display the missed call record. The name is
displayed for the missed call coming from the party stored in the
Phonebook. When there are multiple missed calls, up to three
missed call records are displayed each time you press <.
âĽIf you have received 30 or more incoming calls after a missed
call, the missed call record disappears.
âĽMissed call records might not be displayed while another function is activated.
âĽAfter you display a missed call record, âMissed callâ disappears.
Before Using the Handset
When i-Channel is received
Scroll Selection
When âi-Channel tickerâ on page 115 is set to âONâ and the
FOMA terminal is closed, tickers flow on the Private window.
Press or p to end the tickersâ flow.
In this manual, the description of the command navigation key operation
(selection of top/bottom/left/right, and press of Oo after selecting/
entering a function item) is omitted. Scroll selection is explained below
using the example of selecting the function âQuality alarmâ:
Change Clock Display
You can change displayed contents by pressing < while clock is shown.
Description Example of Steps
Main menu icon
Time only
Icons and Date/time
Selecting Menu
Press m of the FOMA terminal to show Main Menu and then execute,
set, or check respective functions.
Some functions can be selected also by the operation other than pressing m. In this
manual, the operation by the easier way is described.
You can also switch to Simple Menu focusing on only basic functions for easy
operation. (See page 118)
This FOMA terminal supports Kisekae Tool (see page 118). If you use Kisekae Tool to
change the design of the Menu display, some menu configurations change according
to the usage frequency depending on the type of the menu.
Further, some menu numbers that are assigned to the menu items do not apply.
â Scroll Selection
Main Menu is composed of 12 main menu icons indicating each function.
If you select a main menu icon, the Sub-menu Item Selection display appears. If you
further select a sub-menu item, the Lower Sub-menu Item Selection display appears.
By repeating selecting, you can set and check the function.
â Menu Number Selection
You can display some functions by pressing m + menu number (see page 476).
â Multitask is Supported
You can simultaneously use some functions in Main Menu. (See page 401)
34
Sub-menu item
Function name of lower sub-menu item
mďąSet./ServiceďąTalkďąQuality alarmďąSelect an alarm.
No tone. . . . . . . . . Does not sound.
High tone . . . . . . . . High alarm sounds.
Low tone . . . . . . . . Low alarm sounds.
Items which appear on the display
1
Select a main menu icon from the menu function
Select âTalkâ from âSet/Serviceâ.
+Oo
The highlighted item is the currently
selected one.
Press +Xo to highlight the item
below, and +Zo to highlight the item
above.
Press and hold +Bo to scroll the
items continuously.
Press +No to scroll page by page.
M+
Main Menu
Press +Mo to highlight the icon. Press and hold +Mo to scroll
the icons continuously.
If you have not touched any key for 15 seconds, the
Stand-by display returns.
Select a sub-menu item from the menu function
Before Using the Handset
Select âSet./Serviceâ from Main Menu. Main Menu at purchase differs depending on the
body color. (See page 481)
O+
Select a desired lower sub-menu item (function)
Select âQuality alarmâ from âTalkâ.
+Oo
Press Xo
to highlight the item below,
and +Zo to highlight the item above.
Press and hold o
+B
to scroll the items
continuously.
When the items are listed over
multiple pages, the total number of
pages and the current page number
are shown at the upper right of the
display.
35
Before Using the Handset
Set or check the function
Call up the function using the menu number
From the Stand-by display, press m75.
Some menu items have even more detailed menus.
The example below shows how to set âLow toneâ for âQuality alarmâ.
+Oo
+m
The highlighted item is the currently
selected one.
Press +Xo to highlight the item
below, and Zo
to highlight the item
above.
Press and hold +Bo to scroll the
items continuously.
-7-5
Horizontal Open Menu
Menu Number Selection
Menu Number Selection is explained below using the following example:
Description Example of Menu Number
Menu number

+m-7-5
Sounding Alarm when a Line is Nearly Disconnecting
36
Horizontal Open Menu enables you to quickly access the functions that
are available for the horizontal display. To show Horizontal Open Menu,
press m from the horizontal Stand-by display.
Horizontal Open Menu at purchase differs
depending on the body color.
(See page 481)
When âWork with styleâ is set to âHorizontal
Open Menuâ, Horizontal Open Menu
automatically appears just by switching to
Horizontal Open Style.
If you have not touched any key for 15
seconds, the Stand-by display returns.
Some operating procedures or items which
appears on the display in Horizontal Open
Menu differ from the ones described in this
manual.
+m
An actual operation is done as follows:
Function Menu
When the items are listed
over multiple pages, the total
number of pages and the
current page number are
shown at the upper right of
the Function Menu display.
Press +i(
).
Use +Mo to highlight
âDelete allâ and press
+Oo(
).
Enter your Terminal
Security Code and press
+Oo(
).
Before Using the Handset
If you press i when â
â is shown at the lower right of the display,
the Function menu including selectable items such as âSaveâ, âEditâ,
and âDeleteâ appears in each operation. The contents of the Function
menu depend on the display from which you show the Function menu.
Use +Bo to highlight
âYESâ and press
+Oo(
).
+i
Description Example for Function Menu
In this manual, the operation of the Function menu is described as
follows:
To select an item quickly
Press the numeric key corresponding to the
displayed item number.
Item displayed in the Function menu
Operating procedures after selecting
an item in the Function menu
Delete all
You can delete all files.
ďąEnter your Terminal Security Code ďąYES
Item number
Item scroll
When menu items are listed over multiple pages, you can show the previous/next page
by pressing Bo with the uppermost/lowermost item highlighted. You can press No to
scroll through page by page. When
is displayed on the display, you can
scroll through page by page also by pressing m(
)/c(
).
Depending on the display being shown, such as lower sub-menu items, you might be
able to scroll through page by page also by pressing instead of No.
37
Before Using the Handset
Check box

With the functions you can select multiple items, put a check
mark for check boxes to select them. Each time you press
Oo(
), you can switch â
â and â
â.
With some functions, you can put or clear check marks at a
time by pressing i(
) and selecting âSelect all/Release allâ or by pressing
m(
).
â
â is placed to the selected item depending on the function.
When You Forget Key Operation
You can search for the functions you want to know and use, and then
check the operating methods. You can execute some functions from
âä˝żăăăăă (Guide)â. This function is available in Japanese Mode only.
After finishing the operation
ăăăăćŠč˝ (Recommendable functions)
. . . Displays the recommendable functions. Go to step 3.
ăăźăŻăźăć¤ç´˘ (From keywords)
. . . Enter keywords and retrieve. Go to step 2
ćŠč˝ä¸čŚ§ć¤ç´˘ (From Function list)
. . . Retrieves from the function list. Go to step 3.
ć¤ç´˘ĺąĽć´ (Search history)
. . . Displays up to 30 search histories. Go to step 3.
Highlight each item and press l(
); then the
detailed operating methods are displayed.
The ä˝żăăăăă (Guide) display appears also by selecting the ä˝żăăăăă
(Guide) icon â
â pasted on the desktop at purchase.
The Lower Sub-menu Item Selection display is shown. When you press h, the
Stand-by display returns (except during Multitask). The Stand-by display or the former
display automatically returns depending on the function.
To cancel the operation midway
Press h. The contents of the setting are abandoned and the Stand-by display or the
former display returns. The confirmation display appears asking whether to abandon the
setting contents depending on the function. You can press r to return to the previous
operation.
When the âYES/NOâ selection display appears
Press Bo to highlight âYESâ or âNOâ, then press Oo(
).
For Reset Settings
38
măšăăźăˇă§ăăŞăź (Stationery)
ä˝żăăăăă (Guide)Select an item.
Enter a keyword.
Up to 50 search results are displayed.
You can enter up to 24 full-pitch/48 half-pitch characters.
Select a functionSelect an item.
ćŠč˝ăŽčŞŹć (Description) . . . . . . . . Displays explanations for the function.
ćä˝ăŽăăă (How to operate) . . . Displays the operating method.
ăăŽćŠč˝ăä˝żă (Operate function)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Executes the function. Operate each function.
For some functions, press Oo(
) several times for selection.
You can display explanations about the function also by pressing l(
while highlighting the function.
To delete search history, press i(
) and select â1äťśĺé¤ (Delete this)â or
âĺ¨ĺé¤ (Delete all)â, then select âYESâ.
Information
Using UIM (FOMA Card)
You need to turn off the power and then remove the battery before you
insert the UIM. (See page 41)
â Inserting
With the golden IC surface
downward, push the UIM slowly
to the end while pressing the
surface of it.
â Removing
While sliding the UIM, pull it out
slowly.
Security Code
You can set two security codes, PIN1 and PIN2, for a UIM. (See page 126)
Insert/Remove
Cut
Security Function of UIM
The FOMA terminal has the UIM security function (UIM restriction
function) as a security function to protect your data files.
If you obtain data files by the method below with the UIM inserted, UIM
security function is automatically set to them.
ăťWhen downloading images or melodies and so on, from sites or
Internet web pages
ăťWhen receiving i-mode mail with file attachments
The data files with the UIM security can be browsed, played back, started,
edited, attached to mail, or transferred via infrared rays only when the
UIM used for obtaining is inserted. When the UIM used for obtaining the
data or files is not inserted, or when another UIM is inserted, these
functions are not operable.
In the explanation hereafter, the UIM used to obtain data and files is referred to
as âyour UIMâ and other UIMs as âanother personâs UIMâ.
39
Before Using the Handset
The UIM is an IC card that holds your information such as phone
numbers. It can hold data such as Phonebook entries and SMS
messages as well. By sharing a UIM, you can operate multiple FOMA
terminals for multiple purposes.
You cannot use the FOMA terminal for communication such as voice and
videophone calls, i-mode, sending/receiving mail, or packet
communication unless the UIM is inserted.
For details on how to use the UIM, refer to the UIM instruction manual.
When inserting or removing the UIM, take care not to accidentally touch
or scratch the IC.
Make sure that you insert/remove the UIM with the FOMA terminal closed and held in
your hand.
Take care not to force the UIM into place because this can break it.
Take care not to lose the UIM once you remove it.
When you replace your UIM (except during Omakase Lock), you need to enter the
four- to eight-digit Terminal Security Code after turning on the power. When you enter
the correct Terminal Security Code, the Stand-by display appears. If you enter the
incorrect Terminal Security Code five times in succession, the power turns off.
(However, you can turn on the power again.)
Before Using the Handset
âŞâŞâŞâŞâŞ
Information
Your UIM
âŞâŞâŞâŞâŞ
Another
personâs UIM
If the UIM used for
obtaining data files
or mail messages is
inserted, you can
browse/play back the
data files with the UIM
security.
Replacing UIMs
Unless the UIM used
for obtaining data files
or mail messages is
inserted, you cannot
browse/play back the
data files with the UIM
security.
When the UIM is not inserted or when another personâs UIM is inserted, the following
types of data and files are displayed with the restrictions symbol, â
â:
ăťVideophone record messages ăťMovie memos
ăťScreen memos
ăťTemplates
ăťi-Îąppli programs
ăťImages
ăťi-motion movies
ăťChara-den images
ăťMelodies
ăťMachi-chara images
ăťKisekae Tool files
ăťPDF files
ăťChaku-utaÂŽ/Chaku-uta FullÂŽ music files
ăťDownloaded dictionaries
ăťFiles attached or pasted to i-mode mail in the Inbox
ăťFiles attached to i-mode mail in the Outbox/Draft (except the data shot or edited
with the FOMA terminal)
ăťMessages R/F with files (melodies or images) attached or pasted
ăťImages inserted into Deco-mail text
âťThis function applies to the pre-installed i-Îąppli programs, Chara-den images,
Deco-mail pictograms, etc. if they are reinstalled (upgraded) from a site.
âťâChaku-utaâ is a registered trademark of Sony Music Entertainment Inc.
The preview image for the data file with the UIM security appears as
shown on the right.
40
When the UIM security is set for data files, you cannot set them for the functions such
as âDisplay settingâ and âSelect ring toneâ when another personâs UIM is inserted.
When the data files with the UIM security is set for âDisplay settingâ or âSelect ring
toneâ, the FOMA terminal works with their default settings if you replace your UIM with
another personâs UIM. If you insert your UIM again, your settings are enabled again.
The UIM security function is not set for the data files received using the infrared
communication function or data transmission (OBEXâ˘ communication) function and
the still images/movies shot or edited with the FOMA terminal.
Even when another personâs UIM is inserted, you can move/delete data files with the
UIM security.
The settings of the following functions are stored on the UIM:
ăťSMS validity period
ăťSMS center selection
ăťSelect language
ăťPLMN setting
ăťPIN1 code, PIN2 code
ăťPIN1 code entry set
ăťValidating/Invalidating DOCOMO Certificate 1 and user certificate
Types of UIM (FOMA Card)
If you use the blue UIM with your FOMA terminal, note that following
specifications differ from those of the green/white UIM:
Functions
UIM
Reference
(blue)
(green/white)
20 max.
26 max.
91
Operation of user certificate to use
FirstPass
Not available
Available
210
Use of WORLD WING
Not available
Available
460
Use of Service Numbers for âDOCOMO
repair counterâ and âGeneral inquiries
â
Not available
Available
447
Number of digits of the phone number
that can be stored in the UIM Phonebook
Attaching/Removing Battery Pack
Use the FOMA terminalâs dedicated Battery Pack P19.
â Attaching
While pressing the â â part of
the back cover in the direction A,
slide the back cover (2 mm or
more) in the direction B to
unlock.
With the arrow mark facing up, fit
the tab side of the battery pack to
the FOMA terminal securely, and
then push the battery pack into
the direction B while pressing it
against the direction A.
Slide the back cover in the
direction of the arrow and attach
it in place.
â Removing
Remove the back cover
following step 1 of
ââ Attachingâ, and take hold of
the projection of the battery pack
to lift it up.
Projection
Information
Make sure that you attach/remove the battery with the FOMA terminal closed and
held in your hand after you turn off the power. Also, make sure not to press the
one-push open button when you attach/remove the battery.
If you try to force the battery into place, you could damage the UIM or the charging
terminal of the FOMA terminal.
Arrow mark
41
Before Using the Handset
â WORLD WING
WORLD WING is the DOCOMO FOMA international roaming service that enables
you to use the current phone number overseas for making and receiving calls using
the UIM (green/white) and service compatible mobile phone.
You do not need to subscribe to WORLD WING if you have subscribed to the FOMA
service after September 1, 2005. If you offered that you did not need WORLD WING
at the time you signed up for the FOMA service, or when you have midway canceled
WORLD WING, you are required to take the procedures to newly subscribe to
WORLD WING.
If you have signed up for the FOMA service before August 31, 2005, and have not
yet subscribed to WORLD WING, you are required to subscribe to it.
This service is not available with some billing plans.
If you lose your UIM (green/white) or have it stolen overseas, immediately contact
DOCOMO to take the steps necessary for suspending the use of the UIM. For
inquiries, see âdocomo Information Centerâ on the back page of this manual. Note
that you are still charged the call and communication fees incurred after you lose it or
have it stolen.
Do not charge for long periods of time (several days) with the FOMA
terminal turned on.
Charging
Before Using the Handset
Use the FOMA terminalâs dedicated Battery Pack P19.
Life of battery pack
Battery packs are consumables. The usable time shortens slightly each time they are
charged.
When the usable time of the battery pack becomes half the time it was purchased,
replacing is recommended because the battery pack is nearing the end of its life.
Depending on the use conditions, the battery pack may swell as it nears the end of its
life, but this is not a problem.
The life of the battery pack may shorten if you use i-Îąppli programs, talk on the
videophone, watch 1Seg programs and so on for a long time during charging.
For environmental protection, bring the unneeded battery
pack to an NTT docomo shop, dealer, or recycle shop.
Li-ion 00
Charging
For details, refer to the instruction manuals for the FOMA AC Adapter 01/02 (option),
FOMA AC Adapter 01 for Global use (option), and FOMA DC Adapter 01/02 (option).
The FOMA AC Adapter 01 supports 100 V AC only. The FOMA AC Adapter 02 and
FOMA AC Adapter 01 for Global use support from 100 V AC through 240 V AC.
The shape of the plug for the AC adapter is for 100 V AC (for domestic use). To use the
AC adapter that supports from 100 V AC through 240 V AC overseas, you need to
have a conversion plug adapter that is compatible with the voltage of the country you
stay. Do not use a transformer for overseas travel to charge the battery pack.
Even during charging, you can still answer calls if the FOMA terminal is turned on. This
will consume the charged amount so that charging will take longer. Also, the standby
time or talk time might be shorter if you charge the battery pack with your FOMA
terminal open.
If you have a long time videophone call during charging, the temperature in the FOMA
terminal may rise and charging may be suspended. In such a case, wait for a while and
try charging again.
Remove and insert the connector slowly and carefully, without using unnecessary
force.
Do not remove the battery pack during charging.
42
If you leave the FOMA terminal powered on for long periods of time during charging,
you may not be able to use the FOMA terminal for long duration as expected and the
low battery alarm may sound soon, because the FOMA terminal receives the power
from the battery pack after charging is completed. If this happens, charge the battery
pack correctly. When charging the battery pack again, first remove the FOMA terminal
from the AC adapter (or desktop holder) or DC adapter and then set it again.
Estimated usable time for battery pack (The usable time for the battery pack
varies with the charging time and the remaining life of the battery pack.)
Continuous FOMA/3G Select networks In motion: Approx. 410 hours
standby time
[3G]
Select networks Standstill: Approx. 580 hours
[Auto]
In motion: Approx. 400 hours
GSM
Select networks Standstill: Approx. 260 hours
[Auto]
Continuous FOMA/3G
Voice call: Approx. 200 minutes
talk time
Videophone call: Approx. 110 minutes
GSM
Voice call: Approx. 190 minutes
1Seg watching time
Approx. 200 minutes
(Mobile W-Speed is OFF: Approx. 260 minutes)
(In ECO Mode: Approx. 360 minutes)
âťThe continuous talk time is the estimated time that the FOMA terminal can be used for
calls when radio waves can be sent and received normally.
âťThe continuous standby time is the estimated time when radio waves can be received
normally. The standby time could be about half of this estimate depending on the
charge level of the battery pack, function settings, other ambient conditions such as
temperature, and the status of radio waves in the area (weak or no radio waves, for
instance). When you use i-mode communication, the talk/communication time and
standby time will be shorter. Further, even if you do not make calls or not execute
i-mode communication, the talk/communication time and standby time will be shorter if
you watch 1Seg programs, compose i-mode mail, start up a downloaded i-Îąppli
program or the i-Îąppli Stand-by display, execute data communication or Multiaccess,
use the camera, play back music, or use Bluetooth connections.
âťThe continuous talk time and the continuous standby time may be shortened
depending on the network environment in the country you stay.
âťThe continuous standby time for standstill is the average number of hours you can use the
FOMA terminal in standstill status when it is closed and can receive radio waves normally.
âťThe continuous standby time for in motion is the average number of hours you can
use the FOMA terminal in the combined status of âstandstillâ âmovingâ and âout of the
service areaâ when it is closed, in an area where it can receive radio waves normally.
3
Check that the Call/Charging indicator lights in red.
When the Call/Charging indicator flickers, dismount the AC adapter and battery
pack from the FOMA terminal and then re-mount them for charging.
If the symptom persists, troubles with the AC adapter, desktop holder or battery
pack may be involved, so consult a handling counter such as a docomo shop.
Be sure to charge the FOMA terminal with the FOMA terminal closed.
The charging confirmation tone (see page 109) sounds when charging starts and
ends. However, it does not sound when the power is off or during Manner Mode
or Public Mode (Drive Mode).
Be sure to set the FOMA terminal firmly onto the desktop holder. Also, be careful
that the connector cover or a commercial strap is not caught between the FOMA
terminal and desktop holder.
Estimated time for charging battery pack
AC adapter
Approx. 130 minutes
DC adapter
Approx. 130 minutes
âťThe charging time is an estimate of time for when empty battery pack is charged with
the FOMA terminal turned off. The charging time will be longer if you charge the
battery pack with the power of the FOMA terminal turned on.
Charge with AC Adapter and Desktop Holder
Plug in horizontally with
engraved side of connector
of AC Adapter (option) facing
down.
Call/Charging
indicator
Lock claw
Connector
Up to AC Adapterâs plug into a
power socket of 100 V AC such
as the family use.
Put the bottom of the FOMA terminal into the stopper of
the desktop holder (A) to fit the head to the lock claw,
and then depress the FOMA terminal until it clicks (B).
When charging is completed, hold the desktop holder
with fingers and lift up the head of FOMA terminal to
remove.
Unplug the AC adapter from the power socket when you are not going to use it for
a long time.
â Indicator and display during charging and when charging is completed
Stopper
Desktop Holder
Engraved surface
(down side)
Power
socket
AC Adapterâs
plug
Call/Charging indicator
â
â display
Charging
Lights in red
Blinks
Charging completed
Off
Lights
When the FOMA terminal is turned off, â â does not appear.
If you start charging with the battery flat, the Call/Charging indicator might not light
immediately; however, charging itself has started.
AC Adapter
43
Before Using the Handset
âťThe 1Seg watching time is the estimated time for when radio waves can be received
normally with the Flat-plug Stereo Earphone Set P01 (option) connected. The
watching time might be shortened depending on the charge level of the battery pack,
function settings, other ambient conditions such as temperature, and the status of
radio waves in the area (weak or no radio waves, for instance).
Before Using the Handset
When charging only with the AC adapter
Insert the connector with the engraved
surface facing up until it clicks. Pull straight
the connector out while pressing the
release buttons.
To charge the battery, place the cover of
the connector terminal as illustrated. Pull
out the cover of the connector terminal to
direction A, and turn it as direction B.
âťCheck the facing direction (front or rear)
of the AC adapter plug and then insert
or pull it horizontally into or out of the
FOMA terminal.
Malfunction could result if you try to pull
it forcibly.

Checking Battery Level
Cover
When the FOMA terminal is turned on, an estimate of the battery level is
indicated by the icon.
ăťAlmost full . . . . . . . . . . . . . . . . . . .
ăťGetting low. . . . . . . . . . . . . . . . . . .
ăťAlmost empty . . . . . . . . . . . . . . . .
Release
buttons
Charge the battery when it is almost empty.
Engraved
surface
â DC adapter (option)
With the DC adapter, you can use a cigarette lighter socket (12 V/24 V) of cars to
charge the FOMA terminal with the battery pack attached.
For details, refer to the instruction manual for the FOMA DC Adapter 01/02.
Check by Display and Tone
You can check an estimate of the battery level by the display and sound.
mSet./ServiceOther settingsBattery
Battery level
Almost full
Three beeps
Getting low
Two beeps
Almost empty
One beep
Information
If the fuse blows off when charging with the DC adapter, be sure to use a 2A fuse. The
2A fuse is consumables, so purchase at auto parts stores in your neighborhood.
âťAlmost empty.
Charge the battery.
The pictograph disappears in about three seconds.
When the battery is running out
The display on the right appears and the low battery alarm
sounds for about 10 seconds. To stop this alarm, press any
key other than < and >. About one minute later, the FOMA
terminal will be turned off.
During a call, a beeping tone from the earpiece notifies you of
the low battery. About 20 seconds later your call will be cut
and then one minute later the FOMA terminal will be turned
off.
Recharge Battery
display
44
Check Welcome Mail

Welcome mail messages have been saved by default. Press +Oo twice or perform the
operation of âDisplay Mail from Inboxâ on page 164 to show the mail message.
Turning Power On/Off
Information
After the Wake-up display (see page 114) is displayed,
the Stand-by display appears.
If you have stored many Phonebook entries or mail
messages, it may take a while for the display to appear.
If Set Time is set, the current date and time are shown.
When â
â is displayed, the FOMA terminal is out of
the service area or in the place where the radio waves
do not reach. Move to a location where â
â
disappears.
If âStarting System Wait a minuteâ is displayed when
you turn on the power, wait for a while and then
proceed.
Each entry display appears in the order of âPIN1 codeâ â âTerminal Security Codeâ
â âPIN2 codeâ.
Turn Power Off
Press and hold h for at least two seconds.
The exit display appears and the power turns off.
You cannot turn on the power immediately after turning off the power. Wait a few
seconds.
+m-1-5

77
Redialing as a Voice Call when a Videophone Call cannot be Connected
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
77
Setting for Switching a Voice/Videophone Call during a Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
Setting Answer Method of a Videophone Call during i-mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
Using Videophone Calls by Interfacing to External Devices . . . . . . . .
78
Checking inside of a Room when You are Out
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
PushTalk
67
67
67
68
When You cannot/could not Answer a Voice/Videophone Call
Putting a Call on Hold when You cannot Answer Immediately
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Putting a Call on Hold during a Call . . . . . . . . . . . . . . . . . . .
Setting Hold Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Public Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If You could not Answer an Incoming Call. . . . . . . . . .
Recording Voice/Video Messages when You cannot Answer a Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording a Message when You cannot Answer Incoming Call
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing/Erasing Record Messages/a Voice Memo/Videophone Record
Messages/Movie Memos
. . . . . .
68
68
69
PushTalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a Member during a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . .
Receiving a PushTalk Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Entries to PushTalk Phonebook
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call from PushTalk Phonebook . . . . . . . . . . . . . . . . . . . . . . .
Deleting PushTalk Phonebook Entries
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting for Making/Receiving a PushTalk Call. . . . . . . . . . . . . . . . . . . .
80
80
82
83
84
85
86
87
49
Videophone Calls
Making a Call/Videophone Call
Voice/Videophone Calls/PushTalk
You and the other party can talk viewing each otherâs images.
DOCOMO videophones conform to 3G-324M, standardized by the international
standard 3GPP. You cannot connect to the videophone that uses a different format.
3GPP (3rd Generation Partnership Project):
This is the regional standards organization for developing common technical
specifications for third-generation mobile telecommunication systems (IMT-2000).
3G-324M:
This is the international standard for the third generation of mobile videophones.
P-01A supports only 64 kbps communication speed of the videophone.
You cannot talk on the videophone at 32 kbps communication speed.
â Display during videophone calls
âŚReceived image (The other partyâs image through the
camera or substitute image)
âŚSent image (Image through your camera or substitute
image)
âŚCall duration
âŚStatus
: Voice sending/receiving
(gray): Voice sending/
receiving failedâť1
: Image sending/receiving
(gray): Image sending/
receiving failedâť2
: Camera image sending
: Still image sending
: Chara-den talking
Enter the other partyâs phone number,
starting with the city code.
When 27 or more digits are entered, the lower 26 digits
only are displayed.
To store an entered phone number in the Phonebook,
press m(
). Go to step 2 of âStoring Displayed
Phone Number/Mail Address in Phonebookâ on
page 95.
Even when you are dialing within the same area, you
need to enter the city code before the phone number.
When Making a Voice Call
Press d or Oo(
â
: Portrait
: Close-up
: Landscape
: Night Mode
: Chara-den Whole
Action Mode
: Chara-den Parts Action
Mode
: DTMF Transmission
Mode
: Hands-free activated
: AV output
: Bluetooth
communicating
âť1 When voice sending fails, the other party cannot hear your voice.
When voice receiving fails, you cannot hear the other partyâs voice.
âť2 When image sending fails, the sent image is not displayed at the other end.
When image receiving fails, the received image is not displayed.
When voice or image sending/receiving fails, it does not recover automatically. You need
to make a videophone call again.
50
).
â blinks during dialing, and lights during a call.
Information
When Making a Videophone Call
Press l(

You can make a voice call also by pressing -d and then entering the partyâs phone
).
The digital communication
charging starts from this
display.
Press h to end the call after talking.
Information
If you hear the guidance requesting your caller ID (see page 446), follow the steps of
âTo notify your caller IDâ on page 59 to enter â186â and redial.
When the Flat-plug Earphone/Microphone with Switch (option) is connected, you can
hear the other partyâs voice from the earphone. (See page 419)
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of âSetting when closedâ. (See page 67)
If you switch to Horizontal Open Style during a call, the FOMA terminal is set to âNo
toneâ. (See page 67)
You can press numeric keys to send touch-tone signals during a call. During a
Chara-den call, you need to switch to DTMF Transmission Mode. (See page 75)
You cannot make a call in Horizontal Open Style. However, when the Flat-plug
Earphone/Microphone with Switch (option) is connected, you can make a voice call in
Horizontal Open Style.
In Dual Mode of 2in1, you can make a call after selecting Number A or Number B.
(See page 452)
number. If you enter a wrong number, press -h to clear the display and then redial.

Just after purchase, Hands-free is automatically activated by âHands-free
w/ V. phoneâ (see page 76). However, Hands-free is deactivated during Manner Mode
regardless of âHands-free w/ V. phoneâ.
When you make a videophone call with substitute image, note that you will still be
charged for the digital communication, not the voice calls.
If you make a videophone call at 110/119/118 from the FOMA terminal, it is
automatically dialed out as a voice call.
During a videophone call, you can send a Chara-den image to the other party instead
of the image through your camera. (See page 73)
The international videophone call is available using the DOCOMO international call
service âWORLD CALLâ. (See page 60)
Display during dialing
The other partyâs name and icon are displayed if the partyâs phone number and name
are stored in the Phonebook. However, the image is not displayed even if it is stored in
the Phonebook.
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 96) is displayed.
The phone number instead of the name is displayed when you make a call during
Personal Data Lock or to the party stored as secret data in the Phonebook.
If you entered a wrong phone number
Each time you press r, the digit on the far right is cleared. If you press and hold r
for at least one second, all the digits are cleared and the Stand-by display returns.
Press No to move the cursor to the digit you want to clear, and then press r to clear
it. To clear all the digits on and to the right of the cursor, press and hold r for at least
one second.
51
Voice/Videophone Calls/PushTalk
â â blinks during dialing and lights during the call.
Press m during a videophone call to switch between
the image through your camera and substitute image
for sending to the other party.
If a videophone call could not be connected
Voice/Videophone Calls/PushTalk
The reason why it could not be connected is displayed. (The displayed reason might not
be the same as the actual reason depending on the type of the other partyâs phone and
contract for network services.)
Messages
Check number, then
redial
Busy
Busy with packet
transmission
Out of service area/power
off
Set caller ID to ON
Your call is being
forwarded
Redial using voice call
Reasons
You have dialed a non-existent phone number.
The other party is busy. (Depending on the receiverâs
phone, this message might be displayed during packet
communication as well.)
The packet communication is progress at the other end.
The other partyâs phone is out of the service area or turned
off.
Your caller ID is not notified. (when dialing âvisualnetâ, etc.)
During forwarding
The other party activates Call Forwarding Service but the
forwarding destination phone does not support videophone
calls.
The upper limit for the plan with the limit function (Type
Limit, Family Wide Limit) is exceeded.
Upper limit has been
exceeded
Connection failed
Please make your call
You did not make a videophone call from the IP (Information
from the i-mode web page Provider) site among i-mode official sites (at dialing to
V-live).
Connection failed
Redial after setting âActivateâ of âCaller ID notificationâ to
âONâ.
This may appear in the case other than above.
52
Auto-redialing
If âVoice call auto redialâ is set to âONâ, and a videophone call is not connected, a voice
call is automatically made.
Videophone calls cannot be connected to the phones that do not support the
videophone function, or to the phones that are out of the service area or turned off even
if they are videophones. If you have set âVoice call auto redialâ to âONâ and attempt to
dial a phone that does not have the videophone function, the number will be redialed
as a voice call. However, this operation might not work if you call the phone connected
with ISDN-synchronous 64K or the ISDN videophone that does not support 3G-324M
(as of October 2008), or if you dial the wrong number. Note that you could be charged
for the communication.
Function Menu while Entering Phone Number
Notify caller ID
See page 58.
Prefix numbers
See page 62.
Intâl dial assist
See page 61.
Select image
See page 77.
Multi number
You can select a phone number to be notified to the other party.
(See page 449.)
Add to phonebook See page 94.
Compose message You can compose a mail message to send to the phone number
set as the destination address.
Go to step 3 on page 146.
Chaku-moji
See page 57.
Switching a Voice/Videophone Call
You (caller) can switch between a voice call and a videophone call. This
function is available for the mobile phones that can switch between a
voice call and a videophone call.
When the other partyâs phone has a function to switch between the calls,
â
â is displayed on your phone and you can switch from the voice
call to videophone call.
During a voice callc(
When you select an image
to be sent to the other
party, select âSelect
imageâ. Go to step 2 of âSet
by Callâ on page 77.
When âCancelâ is selected,
the FOMA terminal cancels
switching and returns to the
voice call.
While switching, the voice
guidance is played back.
)Change
During a videophone calli(
CHG to voice callYES
Select âNOâ on the
confirmation display to stop
switching and to resume
the videophone call.
While switching, the voice
guidance is played back.
Information
You can switch between a voice call and a videophone call repeatedly.
When i-mode or packet communication is in progress, the communication is
disconnected and then the voice call is switched to the videophone call.
When packet communication is in progress at the other end, the message to the
effect that the communication cannot be switched is displayed and the voice call
continues without switching to the videophone call.
You cannot switch from a voice call to a videophone call while âMulti callingâ is
displayed during a call if you have signed up for Call Waiting Service.
It takes about five seconds to switch. Switching may take a longer time depending on
the radio wave conditions.
Depending on how the callerâs phone is working or on the radio wave conditions, switching
between a voice call and a videophone call may fail and the connection may be cut off.
If you switch between a voice call and a videophone call during a call, the call duration
and call cost are counted respectively for each call. You are not charged while
âChangingâ is displayed.
You cannot switch between a videophone call and a voice call unless âNotify
switchable modeâ on page 78 is set to âIndication ONâ at the other end.
When you switch from a videophone call to a voice call, Hands-free is deactivated.
53
Voice/Videophone Calls/PushTalk
Switch from a Voice Call to a Videophone Call
Switch from a Videophone Call to a Voice Call
When the other partyâs phone has a function to switch between calls, you
can switch from a videophone call to a voice call by selecting âCHG to
voice callâ from the Function menu.

âť
âť
Received calls/missed calls of 64K data communication
Dialed calls of packet communication
Using Call Records
Voice/Videophone Calls/PushTalk
Received calls/missed calls of packet communication
The FOMA terminal can store the other partyâs phone number and date/
time you have dialed or received. You can call back to the other party.
Received calls of 64K data communication and packet
communication when no external device is connected
â Redial
Up to 30 records of dialed voice calls, videophone calls and PushTalk calls are stored in
total, and the older record of dialing to the same phone number is deleted. However, the
dialing by PushTalk is retained in Redial separately from that of the voice call or
videophone call even if you dial to the same phone number.
Received Chaku-moji message
â Dialed Calls
Up to 30 records of dialed voice calls, videophone calls and PushTalk calls are stored in
total, and up to 30 records of 64K data and packet communications are stored in total as
well. The older records of dialing to the same phone number are also retained.
â Received Calls
Up to 30 records of incoming voice calls, videophone calls and PushTalk calls are stored
in total, and up to 30 records of 64K data and packet communications are stored in total
as well. The older records coming from the same phone number are also retained.
When a call is switched between a voice call and a videophone call, the call that is
dialed/received first is stored.
When more than 30 calls are dialed, the older records are automatically deleted. Even
if you turn off the FOMA terminal, call records are not deleted.
In Dual Mode of 2in1, up to 60 redial items, 120 dialed call records, and 120 received
call records for Number A and Number B are stored in total.
Records with time difference corrected
Records for Number B (only in Dual Mode of 2in1)
âť The unchecked missed call icons are highlighted.
Use Redial/Dialed Calls
When Using Dialed Calls
mPhonebookDialed/recv. calls
Dialed calls
The list for call records is displayed.
For Redial
For redial items of PushTalk, press Oo(
) to
show the Redial list of the group. Highlight a party and press p to make a
PushTalk call. If you do not highlight any party and press p, you can make a
group call.
Press m(
) to display the Sent Address list.
You cannot show the Redial list even by pressing Vo from the horizontal
Stand-by display.
â Icons for Redial, Dialed Calls, and Received Calls
âť
Dialed and received calls/missed calls of voice call
âť
Dialed and received calls/missed calls of videophone call
âť
Dialed and received calls/missed calls of PushTalk
âť
Dialed and received group calls/missed group calls of PushTalk
âť
Dialed and received calls/missed calls of PushTalk via serverâs
phonebook
Voice/Video messages are recorded on Record Message
Incoming calls of Remote Monitoring
âť
Dialed and received calls/missed calls of international call
âť
Dialed and received calls/missed calls of international videophone
call
Dialed calls of 64K data communication
54
When Using Redial
Press Vo.
Select a call record.
The detailed display for the call record is displayed.
When the other party is stored in the Phonebook, the
phone number, name, and icon are displayed. If the
same phone number is stored with multiple names in
the Phonebook, the name and icon that come first in the
search order (see page 96) are displayed.
For Redial
Use Received Calls
Press Co.
You can display the Received Call list also by
mPhonebookDialed/recv. callsReceived calls
All calls or Missed calls.
All calls . . . . . . All the records including missed calls
Missed calls. . . The records of missed calls only
In Dual Mode of 2in1, the number of missed calls for
Received Call list
Number A and Number B is displayed respectively.
(If unchecked missed calls are found, the number of them is displayed.)
For received call records of PushTalk, press Oo(
) to show the Received
Call list of the group with âââ mark added to the caller. Highlight a party and
press p to make a PushTalk call. If you do not highlight any party and press p,
you can make a group call.
Press m(
) to display the Received Address list.
You cannot show the Received Call list even by pressing Co from the horizontal
Stand-by display.
Select a received call record.
The other partyâs phone number is displayed if it is
provided. If this caller is stored in the Phonebook, the
phone number, name, and icon are displayed.
If the same phone number is stored with multiple names
in the Phonebook, the name and icon that come first in
search order (see page 96) are displayed. If there is a
Detailed Received
call for packet communication, the senderâs access
Call display
point name (APN) is displayed.
When the other partyâs phone number is not notified, the reason for no caller ID is
displayed.
For missed calls, the ring time is displayed on the right of the received date/time.
When a Chaku-moji message is received, it is displayed.
To make a call to a displayed redial item, dialed call record, or
received call record
Press d to make a voice call. You can make a voice call also by pressing
Oo(
) from the detailed display. Press l(
) to make a videophone call
and press p to make a PushTalk call.
Information
You can make a voice call to the most recently dialed or received number by pressing
-d from the Stand-by display and then +No.
When you make/receive a call with an additional number of Multi Number, the stored
name for the additional number is displayed below the phone number on the detailed
display. If you store a phone number for âNumber settingâ of âMulti numberâ, the
phone number is displayed as well.
Dialed call records of 64K data communication are not stored when you use a
Bluetooth device.
Even if you make a voice call (or videophone call) to the phone number in a received
call record with a Chaku-moji message displayed, the received message is not sent.
When a call comes in from a party who uses a dial-in phone number, a different
phone number might be displayed.
Function Menu while Redial/Dialed Calls/Received Calls is Displayed
Notify caller ID
See page 58.
Prefix numbers
See page 62.
Intâl dial assist
See page 61.
Select image
See page 77.
2in1 dial
You can select a phone number to be notified to the other
party in Dual Mode of 2in1. (See page 452)
Multi number
You can select a phone number to notify the other party. (See
page 449)
Chaku-moji
See page 57.
Search location
You can connect to a site for âimadocokantan searchâ.
YES
55
Voice/Videophone Calls/PushTalk
+m-2-4
Voice/Videophone Calls/PushTalk
Add to phonebook
See page 94.
You can store the phone number in the Phonebook also by
pressing m(
) from the detailed display. Go to
step 2 of âStoring Displayed Phone Number/Mail Address in
Phonebookâ on page 95.
Add to PushTalk
Store in P-Talk PB
Enter a group name.
You can enter up to 16 full-pitch/32 half-pitch characters.
Mail
Compose message You can compose a mail message to send to the phone
number set as the destination address.
Go to step 3 on page 146.
You can compose an SMS message to send to the phone
number set as the destination address.
Go to step 3 on page 190.
Ring time
You can display the ring time for missed calls. Even if you
[Received Call list only] have set âMissed calls displayâ of âRing timeâ to âNot displayâ,
the missed calls which stopped ringing within the ring start
time and their ring times are displayed.
Character size
Add desktop icon
You can switch the character size for Redial, Dialed Calls,
Received Calls, Sent Address, and Received Address. (See
âDialed/recv. callsâ on page 123)
See page 31.
Sent address
See page 175.
[Redial/Dialed Calls only]
Received address
[Received Calls only]
Delete
56
YES
Delete selected
Put a check mark for redial items, dialed call records, or
received call records to be deletedl(
)YES
Delete all
Enter your Terminal Security CodeYES
Information
YES
Store P-Talk group Select a group.
When members who are not stored in the PushTalk
Phonebook are found, the confirmation display appears
asking whether to store them.
Compose SMS
Delete this
See page 175.

You cannot store from the call record for the party who is not stored in the Phonebook.

You cannot store in a PushTalk group unless all the members are stored in the FOMA
terminalâs Phonebook.

If you execute âDelete allâ from the Function menu of Redial/Dialed Calls, all records
in both Redial and Dialed Calls are deleted. Even if you execute âDelete thisâ or
âDelete selectedâ of Redial, the records are not deleted from Dialed Calls and they are
retained. To delete the dialed call records, delete them from the Function menu while
âDialed callsâ is displayed.

Using Chaku-moji
When making a voice call or videophone call, you can send your text
message to tell the subject during calling.
For details on Chaku-moji or compatible models, refer to DOCOMO website or âMobile
Phone Userâs Guide [Network Services]â.
The sending end is charged, but the receiving end is not charged.
When a message is received
A Chaku-moji message is displayed below a caller. The
Chaku-moji message is stored in Received Calls as well.
The Chaku-moji message is displayed only during ringing. It
is not displayed during a call.
Even when a Chaku-moji message comes in within the ring
start time set by âRing timeâ, it is received and recorded in
Received Calls.
The Chaku-moji message is displayed on the Private window when âChaku-mojiâ of
âCalledâ on page 115 is set to âONâ.
The Chaku-moji message is not displayed during Lock All, Omakase Lock, or Personal
Data Lock. However, you can check the Chaku-moji message from Received Calls
after the lock is released.
Information
Store Messages
You can store up to 10 Chaku-moji messages in the Message list.
To edit a stored message, highlight it and press l(
).
You can enter up to 10 characters regardless of whether they are pictographs,
symbols, or full-pitch/half-pitch characters.
Make a Call with a Message
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
i(
)Chaku-mojiDo the following operations.
Create message
You can create a Chaku-moji message just before dialing.
Enter a message.
You can enter up to 10 characters regardless of whether they
are pictographs, symbols, or full-pitch/half-pitch characters.
The Chaku-moji message created using this function is not
stored in the Message list.
Up to 10 sent Chaku-moji messages are stored in Sent Messages, and
you can check for the other partyâs phone number and the date/time the
Chaku-moji messages were sent. Older messages sent to the same
phone number are also retained.
Select message
From the Message list, you can select a stored message.
Select a message.
In Dual Mode of 2in1, up to 10 records for Number A and Number B can be displayed
in total.
Sent messages
From the Sent Message list, you can select a Chaku-moji
message to be sent. Up to 10 sent Chaku-moji messages only
are stored in the Sent Message list. If you send the same
Chaku-moji message, the older one is deleted. When the number
of sent Chaku-moji messages exceeds 10, the messages are
deleted from the oldest one.
Select a sent message.
Press d or Oo(
).
Press l(
) to make a videophone call.
The Chaku-moji message being sent is displayed during dialing.
Detailed Sent Message
mSet./ServiceNW services
Chaku-mojiSent messages
. . . . Chaku-moji message successfully sent
. . . . Chaku-moji message unsuccessfully sent
. . . . . . . Chaku-moji message for Number B (only in Dual Mode of 2in1)
When the transmission result is not displayed, â
â or â
â is not
displayed.
Depending on the radio wave conditions, the transmission result might not be
displayed correctly.
57
Voice/Videophone Calls/PushTalk
mSet./ServiceNW servicesChaku-moji
Create message
Highlight and press l(
Enter a message.
When a Chaku-moji message has arrived at the other partyâs phone, âTransmission
completedâ is displayed, and you are charged a transmission fee.
When a Chaku-moji message does not arrive at the other partyâs phone such as when
the other partyâs phone is not a Chaku-moji compatible mobile phone or the call is not
allowed by âMessage disp. settingsâ at the receiving end, âTransmission failedâ is
displayed. In this case, you are not charged a transmission fee.
Depending on the radio wave conditions, the transmission result may not be
displayed at the sending end even if a Chaku-moji message has arrived at the other
partyâs phone. In this case, you are charged a transmission fee.
Even if you make a call sending a Chaku-moji message, the Chaku-moji message is
not displayed and you are not charged a transmission fee (the call is not recorded in
Received Calls at the receiving end) when the other partyâs phone is out of the service
area, turned off, during Public Mode (Drive Mode), or the ring time for Record
Message Setting is set to zero seconds. Also, the transmission result is not displayed
at the sending end.
When a videophone call is not connected and automatically dialed as a voice call, the
Chaku-moji message is resent as well.
Chaku-moji does not support PushTalk.
You cannot send/receive Chaku-moji messages overseas.
Voice/Videophone Calls/PushTalk
Select a sent message.
When the other partyâs phone number is stored in the
Phonebook, the phone number, name, and icon are
displayed.
Prefer Chaku-moji
You can set how your FOMA terminal works for incoming Chaku-moji
messages for when âSetting when openedâ is set to âAnswerâ.
ON . . . . Does not answer by opening the FOMA terminal during ringing, so you
can check a Chaku-moji message.
OFF . . . Answers by opening the FOMA terminal during ringing.
Function Menu while Detailed Sent Message is Displayed
Store
You can store a sent Chaku-moji message in the Message list.

You can store also by pressing l(
).
Delete this
YES
Delete all
Enter your Terminal Security CodeYES
Message Display Settings
You can set how incoming Chaku-moji messages are displayed.
mSet./ServiceNW servicesChaku-moji
Message disp. settingsSelect an item.
Display all messages . . . .Displays Chaku-moji messages from all callers.
Numbers stored in PB . . .Displays Chaku-moji messages only from the callers
stored in the Phonebook.
Calls with callerID . . . . . . .Displays Chaku-moji messages only from the caller
notifying his/her phone number.
Hide all messages. . . . . . .Does not display Chaku-moji messages.
Information
When you set to âNumbers stored in PBâ, you cannot receive Chaku-moji messages
from the callers stored in the Phonebook B in A Mode of 2in1 (and vice versa).
58
mSet./ServiceNW servicesChaku-moji
Prefer Chaku-mojiON or OFF
<186/184>
Setting Caller ID to Send/Not to Send for
Each Call
Set Caller ID Notification when Making a Call
Each time you dial out, you can set whether to notify your caller ID.
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
i(
)Notify caller ID
Donât notify or Notify caller
To release âNotify caller IDâ, select âCancel prefixâ. Whether to notify or not
follows the setting for âActivateâ of âCaller ID notificationâ.
Set âNotify/Not Notifyâ by Entering â186/184â
Press l(
Not to notify your caller ID
184âDestination phone numberd or Oo(
Press l(
) to make a videophone call.
) to make a videophone call.
Sending Touch-tone Signals
You can send touch-tone signals from your FOMA terminal to use
services such as reserving tickets, checking bank balance, etc.
Store Pause Dial
You need to store a number string to be sent as a touch-tone signal in the
Pause Dial list. If you have inserted a pause (p), you can send a number
string breaking at the point where the pause is inserted.
Information
When you make a call and hear the guidance requesting your caller ID (see
page 446), follow the steps of âTo notify your caller IDâ to enter â186â and redial.
When you make a PushTalk call, âActivateâ of âCaller ID notificationâ or âNotify caller
IDâ is valid, but ânotify/not notifyâ by adding â186â/ â184â is invalid.
You cannot set âCaller ID notificationâ while â
â is displayed.
mSet./ServiceOther settingsPause dial
l(
When a number string is already stored, it is displayed.
To delete a stored pause dial, press i(
) and select âDeleteâ, then select
âYESâ.
Enter a number string.
Enter the pause (p) by pressing and holding a for at least one second.
You can use only 0 through 9, s, a to enter a number string and the
pause (p).
You can enter up to 128 digits.
You cannot enter a pause (p) at the beginning and end of a number string, or
enter it consecutively.
Send Pause Dial
mSet./ServiceOther settingsPause dial
Oo(
d or Oo(
)Enter a phone number
A voice call is made. Once the line is connected, a number string stored in Pause
Dial is displayed up to the first pause (p).
When the other partyâs phone number is stored in the Phonebook, you can
retrieve it selecting from the Search Phonebook display by pressing Bo.
You can search for the phone number also from Received Calls by pressing Co
or from Redial by pressing Vo.
59
Voice/Videophone Calls/PushTalk
To notify your caller ID
186âDestination phone numberd or Oo(
+m-8-4

You can select whether to notify the other party of your phone number
also by entering â186â/â184â before the other partyâs phone number.
Voice/Videophone Calls/PushTalk
Check that the line is connectedd or Oo(
A number string up to the first pause (p) is sent, and a number string up to the next
pause (p) is displayed.
A number string up to the pause (p) is sent each time you press d or
Oo(
).
When you have finished sending the last number, the âTalkingâ display appears.
To send multiple pieces of a number string at a time, press and hold Vo for at
least one second, and select âSend at one timeâ.
Information
During a call, you can send a number string also by displaying the Function menu of
the Pause Dial display.
Some devices on the receiving end cannot receive signals.
You cannot send a number string with pauses during a videophone call.
About international videophone calls
You can make international videophone calls to the other party who uses a specific 3G
mobile phone overseas. Press l(
) instead of d or Oo(
) in the steps
of âEnter a Phone Number to Make an International Callâ. (See page 60)
For the information about connectable countries and telecommunications carriers, refer
to the DOCOMO Global Service web page.
Images sent from the other party may blur on your FOMA terminal or you may not be
able to connect, depending on the other partyâs phone used for the international
videophone call.
Enter a Phone Number to Make an International Call

You can make an international call also by entering 009130â010
âcountry code/area codeâarea code (city code)âdestination phone number.
When the area code (city code) begins with â0â, enter it except for the â0â. However,
include â0â when making a call to some countries or regions such as Italy.
Press l(
) to make an international videophone call.
Making International Calls
WORLD CALL is the international call service available from DOCOMO
mobile phones.
When you have signed up for FOMA service, you have contracted to use
âWORLD CALLâ (except those who have applied not to use it).
You can call about 240 countries and regions.
The WORLD CALL charges are added to your monthly FOMA bill.
The application/monthly fee is free of charge.
The service is not available with some billing plans.
Contact âdocomo Information Centerâ on the back page of this manual for inquiries
about WORLD CALL.
When using international carriers other than DOCOMO, contact them.
Even if the other party makes a call with the setting notifies his/her phone number, the
caller ID might not be notified, or might not be displayed correctly depending on the
callerâs network. In this case, you cannot call by using the Received Call.
Enter numbers in order of 010âcountry/area code
âarea code (city code)âdestination phone number
d or Oo(
Use â+â to Make an International Call
When you enter a phone number for dialing or storing it in the
Phonebook, press and hold 0 for at least one second to enter â+â. You
can use â+â to make international calls without entering an international
call access code.
If you set âAuto assist settingâ of âIntâl dial assistâ to âONâ, an international call access
code of âIDD prefix settingâ is automatically entered.
0(for at least one second)
Enter numbers in order of country/area code
âarea code (city code)âdestination phone number
d or Oo(
)Dial
When the area code (city code) begins with â0â, enter it except for the â0â. However,
include â0â when making a call to some countries or regions such as Italy.
Press l(
) to make an international videophone call.
When you select âDial with orig. No.â, you can make a call without adding an
international call access code.
60
International Dial Assist
You can make a call adding a country/area code or international call
access code to a phone number. (Except for some countries and regions,
if the phone number starts with â0â, the â0â at the beginning is
automatically deleted.)
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
i(
)Intâl dial assist
Select a country/area nameSelect a name
d or Oo(
Press l(
) to make an international videophone call.
When the beginning of the phone number is â+â, you can select only an
international call access code.
When âJapanâ is selected as a country/area name, the display for selecting a
name is not displayed.
If you select a stored country/area name, you can check the stored contents.
Auto Assist Setting
You can set whether to replace â+â at the beginning of a phone number
with an international call access code for when you make an international
call from Japan.
Enter a country/area name Enter a country/area code.
You can enter a country/area name of up to 8 full-pitch/16 half-pitch characters.
You can enter a country/area code of up to 5 digits. But you cannot use #, :, and
+.
IDD Prefix Setting
You can store up to three international call access codes to be added to
the beginning of a phone number for making an international call.

Setting for International Calls
mSet./ServiceNetwork settingIntâl dial assist
Country/Area Code
Highlight and press l(
).
mSet./ServiceNetwork settingIntâl dial assist
IDD prefix setting
Highlight and press l(
).
If you select the stored item, you can check the stored contents.
Enter a nameEnter an international call access code.
You can enter a name of up to 8 full-pitch/16 half-pitch characters.
You can enter an international call access code of up to 16 digits.
Function Menu while Country/Area Code /IDD Prefix
Setting is Displayed
mSet./ServiceNetwork settingIntâl dial assist
Auto assist settingON or OFF
Select a country/area nameSelect a name.
Edit
When no country/area code or international call access code is stored, the
confirmation display appears asking whether to store it. Select âYESâ and go to
step 2 of âCountry/Area Codeâ on page 61 for a country/area code, and go to
step 2 of âIDD Prefix Settingâ on page 61 for an international call access code.
Go to step 2 of âCountry/Area Codeâ on page 61 for Country/Area
Code, and go to step 2 of âIDD Prefix Settingâ on page 61 for IDD
Prefix Setting.
You can edit the item also by pressing l(
).
Delete this
YES
61
Voice/Videophone Calls/PushTalk
Country/Area Code
You can store up to 27 country/area codes to be added for making
international calls from overseas.
Delete all
Enter your Terminal Security CodeYES
Information
)Prefix numbersSelect a name
Press l(
) to make a videophone call and press p to make a PushTalk
call.
For making a PushTalk call, adding a prefix number such as â186â or â184â to the
beginning of the phone number is disabled.

You cannot delete the country/area code or international call access code set by
âAuto assist settingâ.
Voice/Videophone Calls/PushTalk
i(
d or Oo(

Storing Numbers to be Added to the
Beginning of a Phone Number
You can store prefix numbers such as international call access codes or
â186â/â184â and add them to the phone number for dialing. You can store
up to seven prefix numbers.
mSet./ServiceNetwork settingPrefix setting
Highlight and press l(
).
If you select a stored prefix, you can check the stored contents.
To delete a stored prefix, press i(
) and select âDelete thisâ or âDelete
allâ then select âYESâ. If you select âDelete allâ, you need to enter your Terminal
Security Code.
Enter a nameEnter a prefix number.
You can enter a name of up to 8 full-pitch/16 half-pitch characters.
You can enter a prefix number of up to 16 digits. The keys for entry are limited to
0 through 9, s and a.
Prefix Numbers
You can add a prefix number to the beginning of phone number when
you make a call.
62
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.

Making a Call Specifying a Sub-address
You can set whether to regard the numbers after â:â of a phone number
as a sub-address to access the specified phones or data terminals.
The sub-address is a number assigned to identify each ISDN terminal connected to an
ISDN line. It is also used for selecting contents on âV-liveâ.
mSet./ServiceOther settings
Sub-address settingON or OFF
Information
Even if you set âSub-address settingâ to âONâ, â:â at the top of phone numbers and
â:â immediately after the prefix number or â186â/â184â are not regarded as
sub-address mark-off symbols.

+m-7-7
Setting Alarm for Reconnecting
You can set an alarm that sounds until a voice call, videophone call, or
PushTalk communication is reconnected after disconnected owing to
bad radio wave conditions.
mSet./ServiceTalkReconnect signal
Select an alarm.
Information

The reconnectable time differs depending on the usage status and radio wave conditions.
An estimate is about 10 seconds and the call charge is applied also for that duration.
While you are disconnected, no sound is transmitted to the other party.
Reducing Surrounding Noise to Make
Voice Clear
The volume of the other partyâs voice is turned up according to the
surrounding noise during a call. This setting is effective only when the
other party's voice is output from the earpiece.
mSet./ServiceTalkShikkari TalkON or OFF
Reducing Surrounding Noise to Make
Voice Clear
The noise sent to the other party is reduced according to the surrounding
noise during a call.
mSet./ServiceTalkNoise reductionON or OFF

Slowing Down the Other Partyâs Speaking
Speed
During a call, dialing, or connectingd
When Hands-free is activated, â
â is displayed.
Press d again to deactivate Hands-free.
The sound volume during a Hands-free call follows the setting specified by
âVolumeâ (earpiece volume).
You can switch to Hands-free even during Manner Mode. Also, you will still hear
voice through the speaker even when you activate Manner Mode during a
Hands-free call.
Information
+m-7-6

During a voice callm(
When Yuttari Talk is activated, â
â is displayed.
Press m(
) again to return to the normal speed.
Information
Yuttari Talk is effective only during a current voice call. The speaking speed returns to
normal one when you end the call, switch calling parties during Multi calling, or switch
from the voice call to a videophone call.
While the Flat-plug Earphone/Microphone with Switch (option) is connected, you
cannot hear voice through the speaker even if you switch to Hands-free.
Keep the FOMA terminal well away from your ear during a Hands-free call. Otherwise
you could affect or damage your hearing.
Talk into the FOMA terminal within a distance of about 50 cm.

Using Hands-free Compatible Devices
You can make or receive voice calls from a Hands-free compatible device
such as In-Car Hands-Free Kit 01 (option) or a car navigation system by
connecting with your FOMA terminal.
You can connect your FOMA terminal to a Hands-free compatible device
using two ways of connections as follows:
Connect using a cable (USB connection):
To use/charge via the In-Car Hands-Free Kit 01 (option), you need to have the FOMA
In-Car Hands-Free Cable 01 (option).
Connect using Bluetooth (wireless):
To connect to a Bluetooth communication compatible Hands-free device, you need to
register and connect it to the FOMA terminal.
âťFor how to operate Hands-free compatible devices, refer to the respective instruction
manuals.
63
Voice/Videophone Calls/PushTalk

Switching to Hands-free
When you switch to Hands-free, sound such as the other partyâs voice is
audible over the speaker.
Voice/Videophone Calls/PushTalk
Information
To connect using a cable (USB connection), set âUSB mode settingâ to
âCommunication modeâ.
â â appears while you are talking or communicating using a USB Hands-free
compatible device.
â â might appear while the FOMA terminal is connected to a USB Hands-free
compatible device, and â â while âUSB mode settingâ is set to âmicroSD modeâ,
depending on the Hands-free device connected.
The display or ring tone for incoming calls follows the settings of the FOMA terminal.
When the sound is set to output from a Hands-free compatible device, the ring tone
sounds from that device even when Manner Mode is activated or âRing volumeâ of the
FOMA terminal is set to âSilentâ.
The receiving operation in Public Mode (Drive Mode) following the setting of âPublic
(Drive) modeâ.
The receiving operation while Record Message is activated follows the setting of
âRecord message settingâ.
When the sound is set to output from the FOMA terminal, the operation for when the
FOMA terminal is closed during a call follows the setting of âSetting when closedâ.
When the sound is set to output from a Hands-free device, the communication state
does not change regardless of âSetting when closedâ even if you close the FOMA
terminal.
Press h to end the call after talking.
Information
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of âSetting when closedâ. (See page 67)
Chaku-moji message
(See page 56)
64
) to answer
You can send the image through your camera to the
other party. When you press m(
) to answer the
videophone call, the substitute image is sent to the other
party. (Substitute image answering)
Press m during a videophone call to switch between
the image through your camera and substitute image
for sending to the other party.
When you receive a call, the ring tone
sounds and the Call/Charging indicator
flickers.
To vibrate the FOMA terminal for incoming calls, set
âPhoneâ or âVideophoneâ of âVibratorâ to other than
âOFFâ.
During ringing a videophone call, âIncoming V.phoneâ is
displayed. However, during ringing a voice call, nothing
is displayed in particular.
â
â is displayed at the upper left of the phone
number for incoming international calls.
) to answer
For Answering a Videophone Call
Press d or Oo(
the videophone call.
Receiving a Call/Videophone Call
For Answering a Voice Call
Press d or Oo(
the call.
Information
Display for incoming calls
When a callerâs phone number is provided
If you store the callerâs name, phone number, and image in the Phonebook, the name,
phone number, and icon (or image) are displayed.
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 96) is displayed.
The phone number but not the name is displayed during Personal Data Lock.
For a forwarded call, the forwarderâs phone number is displayed below the caller. (It
might not be displayed in the case of some forwarders.)
When you receive a call to an additional number of Multi Number, the stored name for
the additional number is displayed below the caller. (With a forwarded call, you can
press c(
) to switch to display of the forwarder.)
When a callerâs phone number is not provided
The reason for no caller ID is displayed. (See page 139)
Function Menu while a Call is Ringing
Call rejection
You can disconnect the call without answering.
Call forwarding
See page 445.
Voice mail
See page 442.
Switched between a Call and a
Videophone Call by the Other Party
When you have set âNotify switchable modeâ to âIndication ONâ, a caller
(the other party) can switch between a voice call and a videophone call.
You (receiving end) cannot switch between a voice call and a videophone call.
65
Voice/Videophone Calls/PushTalk
You might hear beeps (in-call ring tone) during a call.
If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call
Forwarding Service and set âArrival call actâ to âAnswerâ, the beeps (in-call ring tone)
will sound for another incoming call, enabling you to do the following operations:
Voice Mail Service
. . . . Transfer the call to the Voice Mail Service Center. (See page 442)
Call Waiting Service
. . . . Put your current call on hold and answer the incoming call. (See page 442)
Call Forwarding Service
. . . . Transfer the call to the registered forwarding destination. (See page 445)
You can set âReject unknownâ not to accept calls from the phone numbers that are not
stored in the Phonebook.
You cannot answer a call in Horizontal Open Style. However, when the Flat-plug
Earphone/Microphone with Switch (option) is connected, you can answer a call in
Horizontal Open Style.

When âAnswer settingâ is set to âAny key answerâ, the call is placed on hold if you
answer the call by pressing .< with the FOMA terminal closed. If you have set
âSetting when closedâ to âNo toneâ or âEnd the callâ, the other party hears nothing, and
if you have set âSetting when closedâ to âHoldâ, the call hold tone is played back. You
can start talking by opening the FOMA terminal.

Just after purchase, Hands-free is automatically activated during a videophone call as
âHands-free w/ V. phoneâ has been set to âONâ. (See page 76) However, Hands-free
is deactivated during Manner Mode regardless of âHands-free w/ V. phoneâ.
Even if Call Forwarding Service is set to âActivateâ, the call is not forwarded unless the
forwarding destination is a phone compatible with the videophone conforming to
3G-324M (see page 50). Check the phone you are forwarding the call to and then
activate the service. The videophone caller does not hear the guidance to the effect
that the call is forwarded. (The message to the effect that the call is to be forwarded
appears, depending on the receiverâs FOMA terminal.)
If a videophone call comes in from the phone number to be rejected by Nuisance Call
Blocking Service, the video guidance for Call Rejection is played back and the call is
disconnected.
You can send a Chara-den image to the other party instead of the image through your
camera. (See page 73)
Switched from a Voice Call to Videophone Call by the
Other Party
The display for switching to a
videophone call appears during a voice
call.
Voice/Videophone Calls/PushTalk
YES . . . Sends the image through your camera to the
caller.
NO . . . . Sends a pre-installed substitute image to the
caller.
While switching, the message to that effect is displayed
and the voice guidance is played back.
PushTalk call
+m-5-8
Setting Response of Key Operation for
Answering Incoming Calls
You can set to start talking (Any key answer) or to stop the ring tone
(Quick silent) by pressing a key besides d, Oo, m (for videophone
call), or p (for PushTalk call) for when a call or PushTalk call comes in.
mSet./ServiceIncoming callAnswer setting
Select a key operation.
Any key answer
You can start talking by pressing any key shown below:
Voice callâť1
PushTalk call
d, o
, 0 through 9, a, s, r, m, câť2, o
d, Oo, p, 0 through 9, a, r, l, c, Bo, <
When receiving a videophone call, you can start talking by pressing d, Oo or
m.
66
0 through 9, a, s, r, m, câť2, No, <
0 through 9, a, r, l, c, Bo, <
After you stop the ring tone, vibrator or voice guidance, you can start talking by
pressing d, Oo, m (for videophone call), or p (for PushTalk call).
When the caller (the other party) switches a videophone call to a voice
call, the message telling that the call is being switched appears, the voice
guidance is played back, and then the call is switched to a voice call.
Voice callâť1âť3
Videophone callâť3 0 through 9, a, s, r, câť2, No, <
Switched from a Videophone Call to Voice Call by the
Other Party

Quick silent
The following are the keys you can press to stop the ring tone, vibrator or voice
guidance:
When âSetting when openedâ is set to âKeep ringingâ, you can open the FOMA
terminal in Normal Style to stop the ring tone, vibrator or voice guidance. Even if
you stop it, the other party still hears a ringback tone.
OFF
You can start talking by pressing a key shown below:
Voice call
d, Oo
Videophone call
d, Oo, m
PushTalk call
d, Oo, p
âť1 You can activate Any Key Answer or Quick Silent also by pressing l when
five record messages have already been recorded.
âť2 While â
â is displayed, you cannot start talking or stop the ring tone,
vibrator or voice guidance.
âť3 During Key Lock, you can activate Quick Silent by pressing and holding < for
at least one second.
Information
While the Flat-plug Earphone/Microphone with Switch (option) is connected, you can
press the switch to start talking, regardless of âAnswer settingâ. (See page 420)

Setting Response for when Opening
FOMA Terminal during Ringing
Information
If you receive a videophone call with âAnswerâ set, the still image set for âSubstitute
imageâ of âSelect imageâ is sent to the other party.
You cannot answer calls by opening the FOMA terminal in Horizontal Open Style
even when âAnswerâ is set.

+m-1-8
Setting Response for when Closing FOMA
Terminal during a Call
Set Response for when Closing FOMA Terminal during a
Voice Call/Videophone Call
mSet./ServiceTalkSetting when closed
Phone/VideophoneSelect an item.
No tone . . . . . . .The voice is muted. The hold tone does not sound. The setting is
completed.
Hold . . . . . . . . . .The other party hears the hold tone set for âHolding toneâ of âSet
hold toneâ while the FOMA terminal is closed.
End the call. . . .The call is finished. This is the same operation as pressing h
during a call. The setting is completed.
Speaker ON or Speaker OFF
Speaker ON . . . . The hold tone sounds from the speaker.
Speaker OFF . . . The hold tone does not sound from the speaker.
Information
This function is disabled when the Flat-plug Earphone/Microphone with Switch
(option) is connected. The communication state does not change even if you close the
FOMA terminal during a voice call or PushTalk communication. If you close the
FOMA terminal during a videophone call, the substitute image is sent to the other
party with the line connected.
If you close the FOMA terminal during a videophone call with âNo toneâ set, the
substitute image is sent to the other party. When âHoldâ is set, the still image set for
âHoldingâ of âSelect imageâ is sent.
If you set to âNo toneâ or âHoldâ, âHoldingâ is displayed on the Private window when
the FOMA terminal is closed.
Even when âEnd the callâ has been set, the call does not end if you close your FOMA
terminal from Horizontal Open Style. âNo toneâ works for a voice call/videophone call,
and âSpeaker callâ works for a PushTalk call.

Adjusting Earpiece Volume
mSet./ServiceTalkVolumeUse Bo or to
adjust the earpiece volume.
Adjust the earpiece volume to Level 1 (minimum) through Level 6 (maximum).
During a voice call, you can press Zo or , during a videophone call,
PushTalk call, or calling, you can press Bo or to adjust the volume, and
while entering phone number, you can press and hold Bo(for at least one
second) to adjust it. Press Bo or within two seconds to adjust it.
Information
The earpiece volume adjusted during a call is retained even after the call ends.
67
Voice/Videophone Calls/PushTalk
mSet./ServiceIncoming call
Setting when openedSelect an incoming type
Keep ringing or Answer
Set Response for when Closing FOMA Terminal during
PushTalk
mSet./ServiceTalkSetting when closed
PushTalkSpeaker call or End the call
Information
When you adjust the earpiece volume, the sound volume during a Hands-free call or
speaker call for PushTalk is also adjusted.
Voice/Videophone Calls/PushTalk

+m-5-0
Adjusting Ring Volume
You can adjust the ring volume for incoming calls and mail.

Putting a Call on Hold when You cannot
Answer Immediately
During ringingh
Press d or Oo(
the call.
mSet./ServiceSoundRing volume
Select an incoming type
Use Bo to adjust the volume.
The following icons are displayed on the Stand-by display while âRing volumeâ is
set to âSilentâ:
: You set âPhoneâ, âPushTalkâ, or âVideophoneâ.
Information
The caller is charged for the call even during answer-hold (On Hold).
If you press -h during answer-hold (On Hold), the call will be disconnected.

Putting a Call on Hold during a Call
68
) to release hold and answer
If âAnswer settingâ is set to âAny key answerâ, you can release hold of voice calls
by pressing any key of 0 through 9, a, s, r, m, c, Mo, <, >,
l, or i.
If a videophone call is on hold, the image through your camera is sent to the other
party by pressing d or Oo(
) to release hold. If you press m(
to release hold, the substitute image is sent.
: You set âMailâ, âChat mailâ, âMessageRâ, âMessageFâ, or âi-concierâ.
: You set âPhoneâ, âPushTalkâ, or âVideophoneâ, and set âMailâ, âChat mailâ,
âMessageRâ, âMessageFâ, or âi-concierâ.
If you have set âStepâ, the ring tone is silent for about three seconds, and then the
volume steps up every three seconds, from Level 1 through Level 6.
During ringing of a voice call or videophone call, you can adjust the ring volume
also by pressing Bo. However, you cannot adjust the ring volume in the
following cases:
ăťWhen âRing volumeâ is set to âStepâ
ăťWhen âAnswer settingâ is set to âQuick silentâ and you stop the ring tone or
voice guidance
ăťDuring Manner Mode
ăťWhen a call is cut off within the ring start time specified by âRing timeâ
The FOMA terminal makes three rapid beeps for confirmation and the call is put on
answer-hold (On Hold).
The confirmation tone does not sound during Manner Mode or when âRing
volumeâ is âSilentâ.
The other party hears the hold tone set for âOn hold toneâ of âSet hold toneâ. For
videophone calls, the still image set for âOn holdâ of âSelect imageâ is displayed.
During a callOo (
The other party hears the hold tone set for âHolding toneâ of âSet hold toneâ. For
videophone calls, the still image set for âHoldingâ of âSelect imageâ is displayed.
You can put the call on hold by closing the FOMA terminal during the call if you
have set âSetting when closedâ to âHoldâ.
2
Press d or Oo(
the call.
) to release hold and answer
Information
The caller is charged for the call even while the call is on hold.
If a new call comes in while the current call is put on hold, the hold (Holding) is
released.

Setting Hold Tone
You can set the guidance the other party hears during on hold.
mSet./ServiceTalkSet hold tone
On hold tone or Holding toneSelect a hold tone.
Tone 1/2 . . .The caller hears the pre-installed guidance in Japanese.
RHAPSODY ON A THEME OF PAGANINI OP 43
. . . . . . . . . . .The caller hears the melody. You can set this for âHolding toneâ only.
Voice announce
. . . . . . . . . . .The caller hears the sound recorded by âVoice announceâ. If it has
not been recorded, this is not displayed.
Press l(
) to play back a hold tone. Press r to end the demo
playback.
Using Public Mode
Using Public Mode (Drive Mode)
Public Mode is an auto-answer service that puts importance on manners
in public spaces. Once you activate Public Mode, the guidance is played
back telling that you cannot answer the call as you are currently driving
or in a place (a train, bus, movie theater, etc.) where you should refrain
from answering the call. Then the call is disconnected.
Voice Mail Serviceâť1, Call Forwarding Serviceâť1, and Caller ID Display Request
Serviceâť2 are activated taking priority over Public Mode.
âť1When you receive a voice call and the ring time is set to other than 0 seconds,
services are activated after Public Mode guidance.
âť2When the other party notifies the phone number, Public Mode is activated.
When a voice call comes in from the other party whose phone number is rejected by
Nuisance Call Blocking Service, Public Mode is not activated.
Press and hold a for at least one second.
Public Mode is activated and â
â is displayed.
When a call comes in, the guidance âThe person you are calling is currently driving
or in an area where cell phone should not be used. Please try again later.â is played
back for incoming calls.
To deactivate Public Mode, perform the same operation. Then, Public Mode is
deactivated and â
â disappears.
Information
You can activate/deactivate Public Mode only from the Stand-by display. You can
activate/deactivate Public Mode even when â
â is displayed.
You can make calls as usual even during Public Mode.
If you make an emergency call at 110/119/118, Public Mode is released.
When Public Mode and Manner Mode are activated simultaneously, Public Mode has
priority.
If a âUser unsetâ call comes in while âCaller ID requestâ is set to âActivateâ, the Caller
ID Request guidance is played back. (The Public Mode guidance is not played back.)
You cannot use this function during data communication.
69
Voice/Videophone Calls/PushTalk
If a videophone call is on hold, the image through your camera is sent to the other
party by pressing d or Oo(
) to release hold. If you press m(
to release hold, the substitute image is sent.
If you have set âSetting when closedâ to âHoldâ and put the call on hold by closing
the FOMA terminal, open the FOMA terminal or connect the Flat-plug Earphone/
Microphone with Switch (option) to answer the call.
If you connect the Flat-plug Earphone/Microphone with Switch to answer the
videophone call, the substitute image is sent to the other party.
Voice/Videophone Calls/PushTalk
When Public Mode (Drive Mode) is activated
ăťEven when a call comes in, the ring tone does not sound. The âMissed callâ icon
appears on the display and the call is stored in âReceived callsâ. The guidance is
played back to the caller to the effect that you are currently driving or in an area where
mobile phones should not be used. Then the call is disconnected. When a PushTalk
call comes in, no answer is made and the message âConnection failedâ appears on the
callerâs display. For the talk among three or more members, the message to the effect
that you are driving is conveyed to them.
However, when the power is off or â
â is displayed, the caller hears the
out-of-service area guidance instead of the Public Mode guidance.
ăťThe ring tone does not sound and the Call/Charging indicator does not flicker even
when mail or a message comes in. In addition, the set vibrator does not work.
ăťThe ring tone for 64K data communication, alarm tone, charging confirmation tone, the
ring tone for i-Îąppli call and start tone for i-Widget do not sound, and a melody while an
i-Îąppli program is running is not played back.
ăťThe tickers of i-Channel are not displayed.
ăťSee page 69 for how Public Mode (Drive Mode) and each network service work for
incoming calls when they are simultaneously activated.
Using Public Mode (Power Off)
Public Mode (Power Off) is an auto-answer service that puts importance
on manners in public spaces. Once you activate Public Mode (Power Off),
the guidance is played back telling that you cannot answer the call as
you are currently in a place (hospital, airplane, around priority seat in a
train, etc.) where use is prohibited. Then the call is disconnected.
70
Enter â:25251âd
Public Mode (Power Off) is set. (Nothing is changed on the Stand-by display.)
After setting Public Mode (Power Off) and turning off the power, the guidance âThe
person you are calling is currently in an area where use is prohibited. Please try
again later.â is played back for incoming calls.
To release Public Mode (Power Off), dial â:25250â.
To check the setting for Public Mode (Power Off), dial â:25259â.
When Public Mode (Power Off) is activated
The setting stays activated until you dial â:25250â to deactivate Public Mode (Power
Off). You cannot deactivate the setting just by turning on the power.
The guidance is played back to the caller telling that you are currently in a place where
you should turn off the power. Then the call is disconnected. When a PushTalk call
comes in, no answer is made and the message âConnection failedâ appears on the
callerâs display. For the talk among three or more members, the message to the effect
that you do not participate is conveyed to them.
The Public Mode (Power Off) guidance is played back even when you are out of the
service area or out of reach of radio waves.
ăťSee page 69 for how Public Mode (Power Off) and each network service work for
incoming calls when they are simultaneously activated.

If You could not Answer an Incoming Call
When you could not answer calls (Missed calls), the âNotification iconâ
appears on the Stand-by display. You can check Received Calls by
selecting the icon.
OoOo(
Press h or r to return
to the former display.
When multiple icons are
found, use Mo to highlight
Notification icon
an icon and press
Oo(
).
See page 33 for when the FOMA terminal is closed.
+m-5-5

Incoming calls when Record Message Setting is set to âONâ
Recording Voice/Video Messages when
You cannot Answer a Call
Activate Record Message
mLifeKitRec. msg/voice memo
Record message settingON or OFF
Select an answer message.
Press l(
) to play back the answer message. Press r to end the
demo playback.
When âJapanese 1â, âJapanese 2â, or âEnglishâ is set, a beep sounds after
playing back the answer message to the other party. If âVoice announceâ is set,
the beep does not sound.
Enter a ring time (seconds).
Enter from â000â through â120â in three digits.
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
While Record Message is activated, â
ââźâ
â (the number of recorded
messages for voice calls) and â
ââźâ
for videophone calls) are displayed.
â (the number of recorded messages
The ring time
elapses
Incoming Call
Playing back the
answer message
Recording a voice/
video message
For videophone calls, the still image set for âPreparingâ of
âSelect imageâ is displayed on the other partyâs display while
playing back the answer message, and the still image set for
âRecord messageâ of âSelect imageâ is displayed while
recording.
To answer a call while the answer message is being played
back or a voice/video message is being recorded, press
d or Oo(
).
For videophone calls, press d or Oo(
) to send
the image through your camera, or press m(
) to
Displaying an icon on the
send a substitute image.
desktop (See page 30)
You can answer a call also by pressing the switch on the
Flat-plug Earphone/Microphone with Switch (option). For videophone calls, the image
through your camera is sent to the other party.
Information
Record Message does not work when â
â is displayed.
When Public Mode (Drive Mode) and Record Message are simultaneously activated,
the former has priority and the latter does not work.
The priority order of answer messages is as follows: âSetting for Phonebook entryâ â
âGroup settingâ â âRecord message settingâ.
If âVoice announceâ selected as an answer message is deleted, the answer message
will be set to âJapanese 1â.
71
Voice/Videophone Calls/PushTalk
By activating Record Message, you can play back an answer message to
incoming calls and record callersâ voice/video messages when you
cannot answer them even if you have not signed up for Voice Mail
Service.
You can record up to five messages for voice calls and up to two
messages for videophone calls. Each message can be recorded for up to
20 seconds.
Voice/Videophone Calls/PushTalk
Information
When Voice Mail Service or Call Forwarding Service is set at the same time as
Record Message, the priority depends on the ring time set for Voice Mail Service or
Call Forwarding Service. To give Record Message priority, set the ring time for
Record Message Setting shorter than that for Voice Mail Service or Call Forwarding
Service. Even when you do this, Voice Mail Service or Call Forwarding Service works
if there are already five record messages for voice calls and two record messages for
videophone calls.
You cannot receive a call from a third party while a voice/video message is being
recorded. The third party will hear the busy tone.

Recording a Message when You cannot
Answer Incoming Call
Even if a call comes in while Record Message is not activated, you can
record the callerâs voice/video message just for that incoming call.
During ringingl(
) or >
Manner Mode is also activated.
The caller will hear the answer message and then can leave you a voice/video
message.
During Key Lock, press and hold > for at least one second.
Record Message does not work when five messages for voice calls and two
messages for videophone calls have already been recorded or when a PushTalk
call comes in. Only Manner Mode is set when you operate by pressing >.
When âSide keys guardâ is set to âONâ, you cannot activate Record Message or
Manner Mode by pressing > with the FOMA terminal closed.

+m-5-5
Playing/Erasing Record Messages/a Voice
Memo/Videophone Record Messages/
Movie Memos
Play Back/Erase Record Messages/a Voice Memo
mLifeKitRec. msg/voice memo
Play/Erase msg.
Select a record message or voice
memo.
Record Message list
A beep sounds and playback starts.
On the Record Message list, recorded items are indicated by âââ.
It is played back at the volume set for âVolumeâ (earpiece volume).
When playback ends, a double-beep sounds and the message âPlayingâ is
cleared from the display.
The date and time the message/memo was recorded are displayed during
playback. When a callerâs phone number is provided, it is displayed. If the caller is
stored in the Phonebook, his/her name is also displayed.
However, the name is not displayed and the phone number only is displayed in
the following cases:
ăťWhen you play back a record message from the caller stored as secret data in
Normal Mode
ăťWhen you play back a record message for Number A in B Mode (or vice versa)
while using 2in1
If the callerâs phone number is displayed during playback, you can make a voice
call to that phone number by pressing d. Press l(
) to make a
videophone call and press p to make a PushTalk call.
To play back using .>
From the vertical Stand-by display, press > to play back the latest record message.
When record messages are not recorded, a voice memo is played back.
72
To skip to next message
Erase rec. msg.
Each time you press > during playback, messages are played back in the following
order: the next new record message â the oldest record message â a voice memo.
To cancel playback midway
) or r.
Play Back/Erase Videophone Record Messages/Movie Memos
mLifeKitRec. msg/voice memo
Play/Erase VP msg.
Select a videophone record message
or movie memo.
Erase movie memo You can erase all movie memos.
[Videophone Record YES
Message list only]
Erase all
On the Videophone Record Message list, recorded
Videophone Record
items are indicated by âââ.
Message list
It is played back at the same volume of the playback
sound of i-motion movies.
The date and time the message/memo was recorded are displayed during
playback.
To play back using .>
From the vertical Stand-by display, press and hold > for at least one second to play
back the latest videophone record message. When videophone record messages are
not recorded, the latest movie memo is played back.
To cancel playback midway
Press Oo(
) or r.
Function Menu of the Record Message List/Videophone
Record Message List
Play
You can play back the message.
Erase this
YES
You can erase the message/memo also by pressing
i(
) during playback.
You can erase all record messages and a voice memo from the
Record Message list, and can erase all videophone record
messages and movie memos from the Videophone Record
Message list.
YES
Using Chara-den
You can set up for sending a Chara-den image to the other party.
See page 363 for Chara-den images.
Set by Call
You can set a Chara-den image to be sent to the other party for making a
videophone call.
Chara-den display/Chara-den listl(
Enter the destination phone number and press l(
) to make a
videophone call.
When the other partyâs phone number is stored in the Phonebook, you can
retrieve it selecting from the Search Phonebook display by pressing Bo.
You can search for the phone number also from Received Calls by pressing Co
or from Redial by pressing Vo.
Information
The priority order of substitute images to be sent to the other party is as follows:
âSetting by callâ â âSetting for Phonebook entryâ ââGroup settingâ â âSelect imageâ.
73
Voice/Videophone Calls/PushTalk
Press Oo(
You can erase all record messages from the Record Message
list, and can erase all videophone record messages from the
Videophone Record Message list.
YES
Substitute Image
Useful Functions for Videophone Calls
You can set a Chara-den image for âSubstitute imageâ of âSelect imageâ.
Voice/Videophone Calls/PushTalk
Chara-den display/Chara-den list/Chara-den Recording
displayi(
)Substitute image
From the Chara-den list, you can set it also by pressing m(
).
Chara-den Setup
You can perform settings for a Chara-den call. These settings are
effective only for during a videophone call.
During a Chara-den calli(
Chara-den setupDo the following operations.
Switch Chara-den
Select a Chara-den image.
If you switch Chara-den images, the action mode switches to
Whole Action Mode.
Action list
You can display the list for actions that you can operate.
Highlight an action and press Oo(
) to execute the
action. Press l(
) to check the details of the action.
You can display the Action list also by pressing a.
Change action
At videophone
start-up
Whole Action
Mode
You can switch the action mode between Whole Action Mode
( ) and Parts Action Mode ( ).
You can switch modes also by pressing l.
SW substitute img. You can switch a substitute image to be sent to the other party to
the still image set for âPre-installedâ of âSelect imageâ.
SW org. subst. img. You can switch a substitute image to be sent to the other party to
the still image set for âOriginalâ of âSelect imageâ.
74
Switching Cameras
At videophone start-up
Inside camera
You can switch images to be sent to the other party from through the
inside camera to through the outside camera.
During a videophone calll(
Press l(
) again to switch to the image through the inside camera.
The setting here is effective only for the current videophone call.
Send Substitute Images
You can switch images to be sent to the other party from the image
through your camera to the still image or Chara-den image set as the
substitute image.
See page 363 for Chara-den.
During a videophone callm(
The substitute image is sent to the other party.
â â is displayed while the still substitute image is being sent, and â
â is
displayed if you have set a Chara-den image as a substitute image (during a
Chara-den call).
Press m(
) again to switch from the substitute image to the image
through your camera.
Information
The priority order of substitute images to be sent to the other party is as follows:
âSetting by callâ â âSetting for Phonebook entryâ â âGroup settingâ â âSelect imageâ.
Note that âSetting for Phonebook entryâ and âGroup settingâ are disabled when a
videophone call comes in without notifying the caller ID.
Even when you make a videophone call sending a substitute image, you are charged
for the digital communication.
Switch Image Display Positions
Zoom
You can switch the display locations of the received image and the sent
image.
During a videophone call, press c(
Wide
).
Each time you press
c(
), the displays
switch.
During a videophone call
Use No to adjust the magnification.
The former zoom setting returns when the videophone call ends.
Function Menu during Videophone Call
+c
CHG to voice call
See page 53.
Talk on BT/Phone
You can set whether to communicate through the FOMA
terminal or a Bluetooth device. (See page 426)
Send DTMF tone/
DTMF tone OFF
During a Chara-den call, you can switch to the DTMF
Transmission Mode that enables you to enter the data from
the numeric keys and to send DTMF (touch-tone signals). You
can operate it only during a Chara-den call.
âSend DTMF toneâ is displayed when the mode is not DTMF
Transmission Mode and âDTMF tone OFFâ is displayed in
DTMF Transmission Mode.
In DTMF Transmission Mode, you cannot operate the action
of Chara-den images.
The DTMF tone may not be received depending on the
device of a receiving end.
+c
V.phone settings
Visual preference
See page 76.
Brightness
You can adjust the brightness of the camera image to be sent
to other party to -3 (dark) through +3 (bright).
Select a brightness level.
At videophone
start-up
75
Voice/Videophone Calls/PushTalk
At videophone start-up
You can adjust the magnification for the camera image to be sent to the
other party.
White balance
Voice/Videophone Calls/PushTalk
At videophone
start-up
Automatic
Color mode set
At videophone
start-up
Normal
Night mode
At videophone
start-up
OFF
Focus
At videophone
start-up
Landscape
You can adjust the colors of the camera image to be sent to
the other party, to make the colors look more natural.
Select an item.
Fine weather . . . . . For talking outdoors in fine weather
Cloudy weather . . . For talking in cloudy weather or in the
shade
Automatic. . . . . . . . For adjusting white balance
automatically
Light bulb. . . . . . . . For talking under incandescent light
You can switch the color tone of the camera image to be sent
to the other party.
Select a color tone.
You can lengthen the cameraâs exposure time to make the
camera image to be sent clear in a dark place.
ON or OFF
You can set the focus for the outside camera during a
videophone call.
Close-up or Landscape
The focus for the inside camera is fixed to âPortraitâ (suitable
mode to shoot portraits), so you cannot change the setting.
Chara-den setup
See page 74.
Backlight
You can select whether to light the display constantly or light
for about 15 seconds after an operation.
Constant light or 15 seconds light
LCD AI
See page 117.
Own number
You can display your phone number.
Key guide
You can display the guide of key operation during a
videophone call.
76

Setting Hands-free Videophone
You can set whether to switch to Hands-free automatically for when a
videophone call starts.
mSet./ServiceVideophone
Hands-free w/ V. phoneON or OFF
See page 63 for the operation while Hands-free is activated and how to switch to
Hands-free.

Setting Image Quality for Videophone
Calls
You can set the quality of both the received image and sent image on the
display.
mSet./ServiceVideophoneVisual preference
Select an image quality.
âPrefer motion spdâ is effective for moving images. When there is little motion, the
quality becomes better if you set to âPrefer img qualâ.
If you operate from the Function menu during a videophone call, the setting is
effective only for the current videophone call.
Information
If the radio wave conditions weaken during a videophone call, the image may appear
like a mosaic.

Setting Sound Effects of Ring Tone or Melody
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Informing You of an Incoming Call by Vibration . . .
Using Recorded Sound as Ring Tone . . .
Changing Ringback Tone . . . . . . . . . . .
Setting Keypad Sound . . . . . . . . . . . . . . . . . .
Setting Charging-start/end Tones. . . . . . . . .
Sounding Alarm when a Line is Nearly Disconnecting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Ring Time for Mail and Messages R/F
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sounding Ring Tone from Earphone Only
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Muting Tones from FOMA Terminal . . . . . . . .
Selecting Manner Mode Type . . . . . . . . . .
Screen/Light Settings
106
107
108
108
108
109
109
109
109
110
110
111
Changing Displays . . . . . . . . . . . . . . . . . . . . . . 113
Displaying an Image Stored in Phonebook during Ringing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Setting Displays for Private Window . . . . . . 115
Displaying Arrival Information by Opening FOMA Terminal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Setting Lights for Display and Keypad . . . . . . . . . . 116
Adjusting Quality of Display Automatically . . . . . . . . . 117
Making Display Hard to See from People Around
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Setting Quality of Display . . . . . . . . . . . . . . . . . 117
Setting Color Combination for Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Setting Display of Main Menu . . . . . . . . . . 118
Using Kisekae Tool. . . . . . . . . . . . . . . . . . . . . . . 118
Setting Machi-chara image . . . . . . . . . . . . 119
Setting Display of Horizontal Open Menu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Setting Color of Call/Charging Indicator and Others
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Checking Missed Calls and New Mail by Tone and Call/Charging
Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Changing Character Font. . . . . . . . . . . . . . . . . . . . . . . . . . 122
Changing Character Size . . . . . . . . . . . . . . . . . 123
Setting Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
105
+m-1-3

Panasonic Mobile Communications 208009A UMTS/ GSM Cellular Mobile with Bluetooth&#174; and RFID User Manual 000 P 01A

Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with Bluetooth® and RFID 000 P 01A

Contents

User Manual Part 1

Panasonic Mobile Communications 208009A UMTS/ GSM Cellular Mobile with Bluetooth® and RFID User Manual 000 P 01A