Download: Mirror Download [FCC.gov] Document ID 1019764 Application ID LgBKS+ZE31GAl1L4rgSO/g== Document Description User Manual Part 3 Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 419.01kB (5237646 bits) Date Submitted 2008-10-23 00:00:00 Date Available 2008-11-19 00:00:00 Creation Date 2008-10-15 14:31:42 Producing Software Acrobat Distiller 8.1.0 (Windows) Document Lastmod 2008-10-22 15:48:12 Document Title 000.P-01A.book Document Creator FrameMaker 7.2 Document Author: Administrator
Information
≥You can simultaneously run or display up to eight Widget αppli programs via i-Widget.
To change started Widget αppli, end the unused Widget αppli and then start Widget
αppli from the i-Widget menu. See page 314 for ending the Widget αppli program.
≥If you show the Widget αppli list on the display and do nothing for about three minutes,
the Stand-by display appears. While a Widget αppli program is displayed separately,
the Stand-by display never appears automatically.
Shuffle the i-Widget
You can change the position of started Widget αppli in Widget αppli list.
So that it is changed automatically, you cannot locate them with an
option.
i-Widget display1i
■About i-Widget display
End i-Widget
You can end the i-Widget and the Stand-by display returns.
i-Widget display1r or h
≥You can show the Stand-by display also by pressing m[戻る (Return)] while
displaying Widget αppli list.
Setting i-Widget
i-Widget Roaming Setting
You can set whether to communicate by i-Widget when you use
overseas.
While displaying
started Widget αppli list
While displaying
started Widget αppli
separately
1Widget αppli
While displaying i-Widget menu, all Widget αppli programs are displayed, and “ACTIVE”
is displayed on the started Widget αppli program. While displaying started Widget αppli
list or separately, each Widget αppli program is displayed as started.
: Widget αppli
: i-αppli DX compatible Widget αppli
: Widget αppli of communication
: GPS compatible Widget αppli
m1i-αppli1iαppli settings1i-Widget roaming set.
1ON or OFF
i-Widget Sound Effect
You can set whether to make an effect tone sound when you start
i-Widget.
m1i-αppli1iαppli settings1i-Widget sound effect
1ON or OFF
: Osaifu-Keitai compatible Widget αppli
: Download from an SSL page
2Navigation display
Navigation that corresponds to the button operation is displayed.
313
i-αppli/i-Widget
While displaying
i-Widget menu
Starting Widget αppli
i-Widget Menu
Select a Widget αppli program to be started.
You can start a Widget αppli program also by selecting a Widget αppli program
from the Software list.
When you select already started Widget αppli program, the selected Widget αppli
program is displayed separately. Press r to return to the list display.
End Widget αppli
i-Widget displayHighlight a Widget αppli program to
be ended and press c[終了 (END)]YES
End Widget Appli Inf
i-αppli/i-Widget
When a Widget αppli program does not end successfully, you can check
the date/time and its reason.
mi-αppliiαppli infoEnd Widget appli inf
When “
” is displayed on the End Widget αppli Inf display, press
i(
), and select “Copy info” to copy the information. Select “Delete info”,
and select “YES” to delete the information.
314
Osaifu-Keitai/ToruCa
Osaifu-Keitai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iC Transfer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Osaifu-Keitai Compatible i-αppli
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking IC Card Function . . . . . . . . . . . . . . . . .
Checking Owner Information of IC Card
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ToruCa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving ToruCa . . . . . . . . . . . . . . . .
Displaying ToruCa . . . . . . . . . . . . . . . . . . . . .
How to See ToruCa File List/Detailed ToruCa File Display . . .
Setting ToruCa . . . . . . . . . . . . . . . . . . . . . . .
316
316
317
318
318
318
319
320
322
325
315
Osaifu-Keitai/ToruCa
Osaifu-Keitai
iC Transfer Service
Osaifu-Keitai is the function that enables you to deposit points or tickets
in addition to money such as bill and change into the mobile phone.
Osaifu-Keitai mounts the IC card, so that you can make payment and
others just by placing the FOMA terminal over the scanning device in a
shop.
Further, you can use communications to deposit electronic money or to
check your account for balance or usage details. Security is fully
secure※1 so that you can make use with a sense of security.
For details on Osaifu-Keitai, refer to “Mobile Phone User’s Guide [i-mode]
FOMA version”.
iC transfer service※1 is the service for moving※2 a package of data
files※3 on the IC card of your Osaifu-Keitai to your new Osaifu-Keitai
when you replace your Osaifu-Keitai such as at the time of phone model
change or malfunction.
After moving data files on the IC card, just download※4 an Osaifu-Keitai
compatible i-αppli program, and then you can use the Osaifu-Keitai
services continuously. iC transfer service is available at the service
counters such as a nearby docomo shop.
For details on iC transfer service, refer to “Mobile Phone User’s Guide
[i-mode] FOMA version”.
To use the Osaifu-Keitai compatible service, you need to download the Osaifu-Keitai
compatible i-αppli program from the Osaifu-Keitai compatible site※2 (in Japanes only)
to make the settings.
※1 You can use Omakase Lock and IC Card Lock. (See page 129 and page 318)
※2 iMenu→メニューリスト (Menu List)→おサイフケータイ (Osaifu-Keitai)
Data on the IC card (including electronic money, reward points, etc.) might be lost or
deformed owing to the malfunction of the FOMA terminal. (When we keep your FOMA
terminal for repair, we cannot keep it with data files left, so the data files shall be
deleted beforehand by yourself as a rule.) For supports such as reissue, restoration,
temporary storage, or transfer of data files, consult the service provider which supports
Osaifu-Keitai, except for the data transfer by iC transfer service. For your important
data files, be sure to use the service with backup support.
In any case including malfunction or model change, we cannot be held responsible for
the loss or deformation of data on the IC card or other losses caused regarding
Osaifu-Keitai compatible services.
If your FOMA terminal is stolen or lost, inquire of the provider for Osaifu-Keitai
compatible service you use about ways of dealing with the trouble, immediately.
※1 Both the transferring end and transferred end have to be the FOMA terminal that
supports iC transfer service. Visit a nearby counter such as a docomo shop to use
iC transfer service.
※2 This service is not for “copying” but for “moving” data files, so no data files on the IC
card remain in the FOMA terminal at the transferring end. iC transfer services is not
available for some cases, so use backup services for Osaifu-Keitai compatible
services.
※3 Some Osaifu-Keitai compatible services do not cover iC transfer service, and you
can move only the files on the IC card of the Osaifu-Keitai compatible service that
covers iC transfer service.
※4 You are charged a packet communication fee for downloading i-αppli programs and
respective settings.
316
Starting Osaifu-Keitai Compatible i-αppli
Read and Write Data inside the IC Card
You can start the Osaifu-Keitai compatible i-αppli from the Software list.
By using Osaifu-Keitai compatible i-αppli, you can read/write the data
inside the IC card and use convenient functions such as depositing
electronic money or checking your account for the balance and usage
details on the mobile phone.
mOsaifu-KeitaiIC card content
The list of the Osaifu-Keitai compatible i-αppli programs is displayed. When you
select an i-αppli program, it starts up.
See page 293 for the Software list.
During a call or i-mode connection, you can use Osaifu-Keitai by placing the FeliCa
mark over the scanning device. However, while a display other than the Stand-by
display is shown or another function is activated, you cannot start the Osaifu-Keitai
compatible i-αppli.
Place the FeliCa mark
of the FOMA terminal over the
scanning device to use the target service.
The Call/Charging indicator lights when you bring your FOMA terminal close to a
scanning device and communication becomes ready.
Place the FeliCa mark
of the FOMA
terminal over the scanning device.
Information
Mount the battery pack to use Osaifu-Keitai. Even when the power is turned off or
when the battery has gone flat, you can use Osaifu-Keitai by placing the FeliCa mark
over the scanning device, however, you cannot start the Osaifu-Keitai compatible
i-αppli. You might not be able to use Osaifu-Keitai if you have left the battery unused
for a long period or not charged it after the low battery alarm sounds. Charge the
battery.
When the FeliCa mark
of the FOMA terminal placed over the scanning device is
not identified, slightly move the mark forwards, backwards, to left, or to right.
Osaifu-Keitai compatible i-αppli might start when you place the FOMA terminal over
the scanning device.
317
Osaifu-Keitai/ToruCa
Take care of your Terminal Security Code and password used for each service not to
reveal to anyone.
When you start or download the Osaifu-Keitai compatible i-αppli program for the first
time, the message “Use IC card for current UIM?” appears. When you select “YES”,
you cannot use the IC card function afterward unless you insert the same UIM.
To use the IC card function with another UIM, delete all the information of the IC card
by “Change IC owner”, and then delete all the Osaifu-Keitai compatible i-αppli
programs other than “iD 設定アプリ (iD Setting Application)”. Otherwise, you cannot
use it.
Reading and writing data from the software program and to the IC card is suspended in
the following cases:
In that case, the read or written data is discarded. The operation after the
communication ends differs depending on the service you use.
・When a call comes in while an i-αppli program is running
・When the battery goes flat
Use Osaifu-Keitai
Place the FeliCa mark
of the FOMA terminal over the scanning
device, and you can use the FOMA terminal as electronic money to pay
for shopping or to use it as a traffic ticket. This function is available
without starting the software program.
Locking IC Card Function
Checking Owner Information of IC Card
To prevent the IC card function from being used by others, you can set
the Osaifu-Keitai, received ToruCa, or iC communication disabled.
You can check whether IC owner information required for using the IC
card is consistent with the information of the currently inserted UIM.
If the battery runs out while IC Card Lock is set, the IC card stays locked.
Press and hold m for at least one second.
“ ” appears and IC Card Lock is set.
To release IC Card Lock, perform the same operation and enter your Terminal
Security Code. When Timer Lock ON At Close is set, the display for releasing IC
Card Lock appears also by opening the FOMA terminal.
When you set “PIM/IC security mode” to “Face reader”, follow the operation of
“Use Face Reader to Release Lock” on page 134.
When you set it to “Double security”, enter your Terminal Security Code after the
operation on page 134.
IC Lock (Power-off)
You can set whether to lock the IC card function while the power is
turned off.
Osaifu-Keitai/ToruCa
mSet./ServiceLock/SecurityLock setting
or
mOsaifu-KeitaiIC card lock set.
IC lock (power-off)
Enter your Terminal Security CodeSelect an item.
Setting before OFF . . . . Follows the setting just before turning off the power.
Lock . . . . . . . . . . . . . . . . Sets IC Card Lock.
mOsaifu-KeitaiCheck IC owner
When the UIM differs from the stored one, select “Change” and reset the data on
the IC card, and then you can newly store the UIM information.
Change IC Owner
You can reset the IC owner information by deleting data on the IC card.
After resetting, you can newly register information of currently inserted
UIM.
When you initialize the IC owner information, all the Osaifu-Keitai compatible i-αppli
programs except “iD 設定アプリ (iD Setting Application)” are deleted. However, the
i-αppli program with its data file on the IC card is not initialized, so you need to delete it
separately.
mOsaifu-KeitaiChange IC ownerResetYES
Enter your Terminal Security CodeYES
ToruCa
ToruCa is an electronic card that you can receive with Osaifu-Keitai for
use as fliers, restaurant cards, and coupon tickets.
You can receive ToruCa files from scanning devices or sites and can
easily exchange them using mail, infrared ray, or a microSD card.
The received ToruCa files are saved to “ToruCa” of “Osaifu-Keitai”.
For details on ToruCa, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
318
■Flow for using ToruCa
Receiving ToruCa
Receive from Scanning Device
Place your Osaifu-Keitai over a scanning
device to receive a ToruCa file.
You can receive the ToruCa file from a scanning device using the IC card
function. By receiving detailed information, a ToruCa file becomes a
ToruCa file (details) which has more pieces of information.
For a ToruCa file (details), you can download up to 100 Kbytes per file, and for a
ToruCa file before receiving the details, you can download up to 1 Kbyte per file.
Place the FeliCa mark
scanning device.
of the FOMA terminal over the
You can view more detailed information by using “詳細 (Details)” key.
When a ToruCa file is received
■Sources of ToruCa files
Scanning device
microSD card
QR code
i-αppli
Data broadcasting
Data Storage Center
Mail, infrared
communication,
iC communication
Update and save
ToruCa to Data
Storage Center.
Exchanges ToruCa
files between
i-mode terminals.
319
Osaifu-Keitai/ToruCa
Site
A ToruCa-received tone sounds, the Call/Charging indicator lights.
When “Recv. ToruCa display” is set to “ON”, detailed display of received ToruCa file
appears.
For a ToruCa file before receiveing detailed information, the confirmation display
appears asking whether to connect to a site to download detailed information. Select
“YES” to display a ToruCa file (details) with detailed information received. Select “NO”
to display a ToruCa file without detailed information.
If no keys are pressed for about 15 seconds or “Recv. ToruCa display” is set to “OFF”,
“
” appears on the desktop.
Press Oo, highlight
, and press Oo(
); then the ToruCa File list appears.
About Auto-reading Function of ToruCa
If you set “Auto reading ToruCa” to “Accept” to use the ToruCa files by placing the FOMA
terminal over the scanning device, the available ToruCa files are automatically
recognized. The used ToruCa files are converted into “Used” and then moved to the
“Used ToruCa” folder. Up to 20 used ToruCa files are saved, and when the number of
the files exceeds 20, the files are deleted from the one downloaded at the oldest date.
Even if “Auto reading ToruCa” is set to “Reject”, the confirmation display might appear
asking whether to use “Auto reading ToruCa” when you place the FOMA terminal over
the scanning device. To use ToruCa files, select “YES”, and then set “Auto reading
ToruCa” to “Accept”.
Information
When you fail to receive a ToruCa file, the ToruCa failed-to-received tone sounds,
and the Call/Charging indicator lights.
A ToruCa-received tone and a ToruCa failed-to-receive tone sound at the volume set
for “Phone” of “Ring volume”.
Depending on the settings by IPs (Information Providers), you might not be able to
update ToruCa files or send them by mail or infrared rays.
When receiving detailed information from a ToruCa file
A ToruCa file before receiving detailed information itself does not show the detailed
information. Select “詳細 (Details)” on the ToruCa file display and select “YES” to
connect to the site to receive more detailed information.
After receiving the detailed information, the ToruCa file is overwritten and saved.
Information
You are charged the ordinary packet fee for receiving.
Function Menu of the ToruCa Folder List
Operate folder
Add folder
You can create a user folder. You can create up to 20 folders.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters for
the FOMA terminal.
You can enter up to 31 full-pitch/63 half-pitch characters for
the microSD card.
Edit folder name
You can edit the folder name for the user folder.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters for
the FOMA terminal.
You can enter up to 31 full-pitch/63 half-pitch characters for
the microSD card.
Delete folder
All ToruCa files in the folder are deleted.
Enter your Terminal Security CodeYES
Osaifu-Keitai/ToruCa
Displaying ToruCa
You can display ToruCa file received by the IC card function or from sites
or mail.
mOsaifu-KeitaiToruCa
Select a folder.
Each time you press m from the ToruCa Folder list,
ToruCa Folder list
you can switch folders between the FOMA terminal and
the microSD card.
When the folder contains unread ToruCa files, “
” appears.
Select a ToruCa file.
320
Search all folders
Auto-sort
You can search through all ToruCa files in the FOMA terminal
(except ToruCa files stored in the “Used ToruCa” folder) by
specifying a search condition.
Select a search condition.
Genre. . . .Select a genre.
Press l(
) to display a list of category
icons belonging to the genre.
Title . . . . .Enter characters to be searched for, from those in
the title.
Index . . . .Enter characters to be searched for, from those in
location data.
You can enter up to 20 full-pitch/40 half-pitch characters for
the Title search, and up to 10 full-pitch/20 half-pitch
characters for the Index search.
You can copy the ToruCa files together with the folder from
the FOMA terminal to the microSD card.
CPY all to microSD You can copy all the ToruCa files together with the folder from
the FOMA terminal to the microSD card.
Enter your Terminal Security CodeYES
Copy to phone
You can copy the ToruCa files together with the folder from
the microSD card to the FOMA terminal.
Copy all to phone
You can copy all the ToruCa files together with the folder from
the microSD card to the FOMA terminal.
Add or OverwriteEnter your Terminal Security Code
YES
When you select “Overwrite”, the confirmation display
appears telling that the ToruCa files in the FOMA terminal
will be deleted.
Connect to Center
See page 140.
All ToruCa disp.
You can display all the ToruCa files stored in the FOMA
terminal.
You can display them also by pressing c(
).
Ir/
transmission
Send all Ir data
All
See page 387.
transmission See page 389.
Memory info
You can display the used memory space (estimate)/the
number of saved files.
Delete all
You can delete all the ToruCa files stored in the FOMA
terminal.
Enter your Terminal Security CodeYES
Select storage
You can set a destination folder for when copying from the
FOMA terminal to the microSD card.
YES
Copy
321
Osaifu-Keitai/ToruCa
You can set to automatically sort and save the ToruCa files
that satisfy the conditions set to the folder for when you
receive them from a scanning device or automatically receive
them from data broadcasting while watching a 1Seg program.
Select a sorting condition.
Genre. . . . . Put a check mark for the genre to sort into and
press l(
). You can put it for multiple
genres.
Title . . . . . . Enter characters from those in the title, to be a
sorting condition.
Index . . . . . Enter characters from those in the location data,
to be a sorting condition.
Release . . . Select “YES” to release the sorting condition you
specified.
You can enter up to 20 full-pitch/40 half-pitch characters for
the Title sort, and up to 10 full-pitch/20 half-pitch characters
for the Index sort.
When a sorting condition is already specified for the folder, it
is displayed. Press i(
) to set a sorting condition
again.
Copy to microSD
Information
“
” is displayed when the Genre sort is set, “
” is displayed when the Title sort is
set, and “
” is displayed when the Index sort is set.
When a file satisfies multiple conditions, it is sorted into the top of the folder in the
ToruCa Folder list.
The ToruCa file (details) is copied as a ToruCa file before receiving details if it
contains the data file with the UIM security or whose output from the FOMA terminal is
prohibited.
The ToruCa files in the “ToruCa” folder within the FOMA terminal are saved to “SD
ToruCa” on the microSD card.
The ToruCa files in “SD ToruCa” on the microSD card are added or overwritten and
then saved to the “ToruCa” folder in the FOMA terminal.
“
” is displayed for the folder set as a destination.
When you execute Check microSD, or create or edit a folder by using a personal
computer, the destination folder on the microSD card might be changed. When the
setting is changed, set the destination folder again.
How to See ToruCa File List/Detailed
ToruCa File Display
ToruCa File list
Detailed ToruCa File display Detailed ToruCa File display
(for ToruCa file)
[for ToruCa file (details)]
State of ToruCa file
※1
Unread ToruCa file
Read ToruCa file
Used ToruCa file
Osaifu-Keitai/ToruCa
※2
FOMA terminal incompatible ToruCa file
※1 Does not apply to the ToruCa file downloaded from a site.
※2 Appears for only the ToruCa file on the microSD card.
“ ” is added to the expired ToruCa file.
“
” is added to the ToruCa file whose output from the FOMA terminal is prohibited.
Category
Displays a category icon that matches the contents of the ToruCa file.
Index file
Displays the location data of the publisher of the ToruCa file information.
Title
Date and time the ToruCa file was received
ToruCa information
Summary and the “詳細 (Details)” key are displayed for a ToruCa file. Publisher
information is displayed for a ToruCa file (details).
322
Function Menu of the ToruCa File List/Detailed ToruCa File
Display
Attach to mail
Move
You can compose an i-mode mail message with the ToruCa
file attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Connect to Center
[List only]
See page 140.
ToruCa folders
[List only]
You can display the ToruCa folder list.
You can display it also by pressing c(
Multiple-choice
[List only]
You can select multiple ToruCa files and operate them.
Put a check mark for ToruCa files to be selected
i(
)Select an item.
Move . . . . . . . . . . . . . See page 323.
Copy. . . . . . . . . . . . . . See page 323.
Copy to microSD . . . See page 323.
Copy to phone . . . . . See page 323.
Send Ir data. . . . . . . . See page 386.
Select all . . . . . . . . . . Selects all files.
Release all. . . . . . . . . Releases all selections.
Update ToruCa
[Detailed display only]
You can re-receive the information about the ToruCa file. The
re-received ToruCa file (details) is automatically overwritten
and then saved.
YES
You cannot update some ToruCa files.
See page 205 when ToruCa files are stored to the
maximum.
Select a destination folder.
You cannot select the “Used ToruCa” folder.
Search/sort
Search
[List only]
You can change the order of displayed files.
Select an order.
Copy
Copy
You can copy the displayed or highlighted ToruCa file to
another folder.
Select a destination folder.
You cannot select the “Used ToruCa” folder.
Copy to microSD
The files are copied to the folder as specified by “Select
storage” on page 321.
Copy to phone
You can copy the ToruCa file from the microSD card to the
ToruCa folder in the FOMA terminal.
Operate image
Save one image
You can save an image displayed on the ToruCa file.
[Detailed display only] Select an image
Go to step 2 on page 203.
Save some images You can save multiple images displayed on the ToruCa file.
[Detailed display only] Put a check mark for images to be savedl(
Go to step 2 on page 203.
Save all images
Among the images displayed on the ToruCa file, you can save
[Detailed display only] all the images that can be saved at one time.
Go to step 2 on page 203.
Save BG image
You can save the background image of the ToruCa file and
[Detailed display only] set it for the Stand-by display or Wake-up display.
Go to step 2 on page 203.
323
Osaifu-Keitai/ToruCa
Sort
[List only]
You can search through ToruCa file in the folder by specifying
a search condition.
Select a search condition.
Genre. . . .Select a genre.
Press l(
) to display a list of category
icons belonging to the genre.
Title . . . . .Enter characters to be searched for, from those in
the title.
Index . . . .Enter characters to be searched for, from those in
location data.
You can enter up to 20 full-pitch/40 half-pitch characters for
the Title search, and up to 10 full-pitch/20 half-pitch
characters for the Index search.
).
Retry
You can play back an animation image or Flash movie in the
[Detailed display only] ToruCa file from the beginning.
When a part of the Flash movie is outside the display area,
the Flash movie might not be played back.
Add to phonebook
[Detailed display only]
See page 94.
Add desktop icon
See page 31.
Ir/
transmission
Send Ir data
transmission
Memory info
[List only]
See page 386.
See page 388.
You can display the used memory space (estimate)/the
number of saved files.
Osaifu-Keitai/ToruCa
Delete
Delete this
[List only]
YES
Delete selected
[List only]
Put a check mark for ToruCa files to be deleted
l(
)YES
Delete all
[List only]
You can delete all ToruCa files in the folder.
Enter your Terminal Security CodeYES
Delete
[Detailed display only]
YES
Information
The ToruCa file (details) that contains data whose output from the FOMA terminal is
prohibited is attached as a ToruCa file before receiving details.
You might not be able to attach the ToruCa file to i-mode mail depending on its file
size.
You cannot copy ToruCa files whose output from the FOMA terminal is prohibited.
324
Information
The ToruCa file (details) is copied as a ToruCa file before receiving details if it
contains the data file with the UIM security or whose output from the FOMA terminal is
prohibited.
When the number of files in the destination folder on the microSD card is full, a new
folder is automatically created and ToruCa files are saved to that folder.
When copying is completed, the message “Storage is changed to XXXXXXXX”
(XXXXXXXX denotes a folder name) appears.
The name of copied ToruCa file is TORUCXXX (XXX denotes a numeral).
When no folder is set as a destination folder on the microSD card, a new folder is
created automatically and the file is saved to the folder. After saving, the newly
created folder is set as the destination folder.
You might not be able to execute “Copy to microSD” for the ToruCa file depending on
its file size.
You might not be able to execute “Copy to phone” for the ToruCa file depending on its
file size.
The image satisfying the following conditions is saved as a frame or a mark:
・Transparent GIF file that is not an animation GIF file
・The file extension is “ifm”.
・Images of Stand-by (480 x 854), VGA (480 x 640), CIF (352 x 288), QVGA (240 x
320), QCIF (144 x 176), or Sub-QCIF (96 x 128) are saved as frames; and images
of Stand-by (480 x 854) or smaller except frames are saved as marks.
Setting ToruCa
mOsaifu-KeitaiSettings
Do the following operations.
You can set whether to receive ToruCa file from a scanning
device using the IC card function.
Accept or Reject
Auto reading
ToruCa
You can set whether to have the available ToruCa files
automatically recognized for when you place the FOMA terminal
over the scanning device.
Accept or Reject
Recv. ToruCa
display
You can set whether to display the detailed ToruCa File display
when you receive a ToruCa file while the Stand-by display is
shown.
ON or OFF
ToruCa from
dataBC
You can set whether to receive ToruCa files automatically from
data broadcasting while watching a 1Seg program.
Auto receive ON or Auto receive OFF
Check same
ToruCa
You can set whether to check the same ToruCa file is already
received before receiving a ToruCa file from a scanning device or
receiving a ToruCa file automatically from data broadcasting
while watching a 1Seg program.
ON or OFF
ON . . . . Checks and does not receive a new ToruCa file if the
same ToruCa file is already received.
OFF . . . Does not check. Receives even the same ToruCa file.
Osaifu-Keitai/ToruCa
Receive ToruCa
Information
If “Auto reading ToruCa” is set to “Reject”, you might not be able to use ToruCa files.
The ToruCa files stored in the “Used ToruCa” folder or expired ToruCa files are not
included in target files.
325
326
Map/GPS Function
Using GPS Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking Your Location . . . . . . . . . . . . . .
Using Map/GPS Compatible i-αppli . . . . . . . . . . . . . . . . . . . . . .
Providing Location Information on Request
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notifying Location Information. . . . . . . . .
Displaying History of Checked Location Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
328
328
329
336
337
337
338
327
Using GPS Function
GPS is operated by the United States Department of Defense, so the GPS radio wave
conditions might be controlled (accuracy deterioration, radio wave supply suspension,
etc.) depending on the defense strategy of the United States Department of Defense.
Note that we do not take any responsibility for a loss such as pure economic loss
resulting from the facts that you have missed the chance to check the measurement
(communication) results, which have been caused by external factors such as
malfunctions, erroneous operations, troubles, or power failure (including battery
shortage) on the FOMA terminal.
You cannot use the FOMA terminal as a navigating system for aircraft, vehicles, and
people. Therefore, note that we are not held responsible for any damage resulting from
the use of the location information for navigation.
You cannot use GPS as a high-accuracy measuring device. Note that we do not take
any responsibility for the damage caused by an error in the location information.
You cannot use the GPS function when the FOMA terminal is out of the service area
(or overseas).
Checking Your Location
You can measure your current location and display it.
You can display a map and send your location information by mail as well.
mLifeKitMap/GPSPosition location
Blinks during measuring
Map/GPS Function
Information
You cannot use the GPS function in the following cases:
・During Self Mode
・During Omakase Lock※
・During Lock All※
・While the UIM is not inserted
※Provide Location is available.
As GPS uses radio waves transmitted from the satellites, note that you cannot or
might have difficulty to receive radio waves in the following conditions:
・In a building or right under it
・In the basement, tunnel, ground, water
・In a bag or case
・In densely crowded areas with buildings and houses
・In densely crowded trees and right under them
・Close to high-tension wires
・In a car or train
・In bad weather such as heavy rain and snow
・When there are obstacles (persons and articles) around the FOMA terminal.
・When you cover the displays, keys, microphone, or speakers of the FOMA terminal
with your hand.
In these cases, an error in the obtained location information might become 300
meters or more.
328
The current location is displayed by the latitude and longitude.
…Measurement date …Latitude …Longitude
…Geographic datum
…Accuracy
★★★: Almost accurate location information (Error is about less than 50
meters)
★★☆: Relatively accurate location information (Error is less than about 300
meters)
★☆☆: Approximate location information (Error is about 300 meters or more)
The accuracy is an estimate. It might differ from actual one depending on the radio
wave conditions in the surrounding area.
Press l(
) to measure again in “Quality mode” (see “Positioning mode”
on page 338).
When “
” is displayed at bottom right of the display during measuring,
press i and select “OK” to display the location using the information during
measuring.
You can measure your location also by pressing and holding 1 for at least one
second from the vertical Stand-by display. After measuring, the “Function Menu
while Current Location is Displayed” on page 329 is performed following the
setting of “GPS button setting”.
Function Menu while Current Location is Displayed
Read map
You can display a map by starting GPS compatible i-αppli
program set by “Select map”.
Map/GPS αppli
You can use the location information on a GPS compatible i-αppli
program.
Select an i-αppli program.
Paste to mail
You can compose an i-mode mail message with the URL of the
location information pasted to the text.
YES
Go to step 2 on page 146.
The URL of the location information to be sent is displayed on
i-mode compatible phones only.
Add to phonebook You can store the location information in the Phonebook.
YES
Go to step 2 of “Storing Displayed Phone Number/Mail Address
in Phonebook” on page 95.
Attach to image
You can store the location information in the image.
Select a folderSelect an imageYES or NO
YES . . . . Overwrites and saves.
NO . . . . . Saves as a separate file.
Using Map/GPS Compatible i-αppli
mLifeKitMap/GPSMap
When “Select map” is not set, select an i-αppli program for using for displaying a
map.
mLifeKitMap/GPSMap/GPS αppli
Select an i-αppli program.
See page 293 for the Software list.
Information
When you use a GPS compatible i-αppli program, the location information is sent to
the information provider of the i-αppli program you use.
You need to set “Location usage” of “Software setting” to “ON” when you use the GPS
function of a GPS compatible i-αppli program.
Using “地図アプリ (Map Application)”
The pre-installed “地図アプリ (Map Application)” enables you to read the
map of the place you are currently in or you specify, or check area
information by using the GPS function and map. You can then navigate
yourself to the destination by vehicle, on foot, or by car.
Further, you can easily get transfer information by voice input.
You are separately charged a packet communication fee. You are advised to subscribe
to Pake-Houdai, Pake-Houdai Full or Pake-Houdai Double for using this software
program.
If you delete this software program and then when you want to resume it, download it
from “ｉエリア−周辺情報− (i-area -Area Information-)”.
This software program is not available when the mode of 2in1 is set to B Mode.
Note that we are not held responsible for the accuracy and promptness of the map and
route information.
While driving, ensure that a person other than the driver operates this software
program.
This software program supports motion tracking.
The displays are for reference, so the actual ones might differ.
329
Map/GPS Function
Display a Map
You can start GPS compatible i-αppli program set by “Select map”.
At purchase, “地図アプリ (Map Application)” is set, you can read a map
of current location or designated location.
Start GPS Compatible i-αppli
You can select an i-αppli program from the list of the GPS compatible
i-αppli programs and start it.
■Standard and optional services
The standard and optional services are available with this software program.
Standard service: Provided by DOCOMO (charge free).
Optional service: Provided by ZENRIN DataCom (charged).
You can use the optional services charge free except traffic information for up to 60 days
from when you have started this software program for the first time. To use the optional
services from 61 days on, you need to register yourself as a member of “ゼンリン
地
図＋ナビ (ZENRIN/map+navi)” (charged) provided by ZENRIN DataCom.
Even when you register yourself as a member while you are using this software
program, you do not need to re-download it. You can use this software program as it is.
Menu
Descriptions
フリーワード By entering facilities name, address, phone number or zip
code, you can check area information and display the map.
検索
Keyword
Search
Map/GPS Function
地図
Map
Free
You can check the map of the place stored in this software
program, on the server, or retrieved by the previous search.
After you store it on the server, the stored point can be
shared with your personal computer as well.
Charged
From 61
days on
Descriptions
On the map, you can color the places where you measured
in the past using GPS, by the unit of city, ward, town, village,
or prefecture.
By using GPS, you can leave your footprints on your current
position, and display the track you move.
In addition to the ordinary map, you can change the mode to
show the various types of maps such as the map you can
move by inclining the FOMA terminal, the 3D map, and the
map that accentuates train routes.
You can invite friends by Map Talk, and exchange messages
while showing the location of the friends on the map.
You can send “footprint” data files stored on the microSD
card to the server and view the footprints on the personal
computer.
To the server, you can back up the area data that you
measured in the past using GPS.
Free
災害用
メニュー
Emergency
Free
You can navigate yourself to the destination via a
Charged
comprehensive means of transportation including vehicle,
foot, and car.
You can navigate yourself easily to your home you have
stored.
You can check the nationwide traffic congestion information.
乗換案内
Transfer
You can check the train transfer information and timetables. Charged
You can check the map for a train route and set an alarm to
sound before your departure.
By voice input, you can easily get transfer information.
Free
Charged
You can search for facilities which are useful in a time of
Charged
disaster.
You can start up a disaster-time use i-αppli program that links
with the map application but does not require
communication.
設定／ヘルプ You can set how to show the map and navigation, and check
Setting/Help
how to use them.
ナビ
Navigation
330
便利ツール
Utility
From 61
days on
By using GPS, you can display the map of the place you are
currently in or specified from address list, or by entering
phone number.
By speaking an address to input, you can easily display the
map.
周辺検索
You can check information of shops, facilities, or iD member
Local Search
shops in the area you are currently in or you specify, and can
obtain coupons from gourmet information.
You can check nearby empty parking lots.
By voice input, you can easily check area information.
Menu
Free
■“地図アプリ (Map Application)” TOP menu display and its operation
The respective menus are displayed on the TOP menu display.
When you close the menu, the map retrieved by the last search
appears.
At the first start-up, the usage rules and caution items on use
are displayed.
TOP menu display
◆When 60 days passes without registering yourself as a member
At the first start-up on or after 61 days, the message telling that
the functions you can use are limited, and the message that
refers to the member registration site appear.
The same messages appear when you select an optional
service menu.
※To register yourself as a member, access “ゼンリン
地
図＋ナビ (ZENRIN/map+navi)” via this software program.
Key operation
Action
Can close the menu or return to the point retrieved by the first
search.
Can turn the map counterclockwise.
Can turn the map northward.
Can turn the map clockwise.
◆Key operation when the quick access menu is shown
Key operation
Action
Can check area information of the place displayed on the map.
[周辺検索
(Check area information)]
Xo[ココへナビ
Can set the start point and search for a route to the center of
(Navigate to this place)] the map.
■Map display and its operation
Co[トーク
(Send talk
Map View display
Vo[ココを登録
(Store this place)]
Can store the location information on the center of the map in
this software program, on the server, or in the Phonebook.
When you store it on the server, the stored point can be shared
with your personal computer as well.
Oo[詳細 (Details)]
Can check the details.
■The Search Result display for area information and its operation
The display and operation are for when you show the search result on the map, not for
when you select it from the list.
◆The Search Result display for area information
◆Key operation when the map is shown
Key operation
l(TOP)
Action
Can show the TOP menu.
Oo[メニュー (Menu)] Can show the quick access menu.
i[縮小(Reduce)]
Can reduce the scale to display a large area by pressing and
holding the key.
c[拡大(Enlarge)]
Can enlarge the scale to display the details by pressing and
holding the key.
Mo
Can move the map up, down, left, and right.
© 2008 ZENRIN DataCom Co., LTD.
331
Map/GPS Function
© 2008 ZENRIN DataCom CO., LTD.
送信 Can invite friends and display on the map.
Can send the URL for the displayed map by i-mode mail.
)]
◆Key operation when the Search Result display for area information is shown
Key operation
Action
Oo
Can show the quick access menu.
Mo
Can move the map up, down, left, and right.
Can display prerious 10 results.
Can display next 10 results.
Can show the previous search results.
Can re-search the center area of the displayed map.
Can show the next search results.
l(TOP)
Can show the TOP menu.
i[縮小(Reduce)]
Can reduce the scale to display a large area by pressing and
holding the key.
c[拡大(Enlarge)
Can enlarge the scale to display the details by pressing and
holding the key.
出発地 (Start point)Select a setting method.
目的地 (Destination)Select a setting method.
時間指定 (Specify time)Select an item.
Searching for a Route and Navigating Yourself to
Destination by Voice and Display
Map/GPS Function
You can set a start point and destination, and search for a route. The
routes you can go through on foot, by public transportation, or by car are
displayed. After you search for the route, the voice and display navigate
you to your destination.
TOP menu displayナビ Navigation
ナビをする (Navigate)
332
現在地（GPS）[Current location (GPS)]. . . . Set a start point measuring the current
location.
フリーワード検索 (Keyword search) . . . . . . Set a start point searching by keywords.
地図上で指定 (Specify on map). . . . . . . . . . . Set a start point on the map.
TEL／〒検索 (TEL/ZIP code search) . . . . . . Set a start point searching by a phone
number or zip code.
住所一覧から (From address list) . . . . . . . . . Set a start point selecting an address.
ジャンルから (From genre) . . . . . . . . . . . . . . Set a start point selecting a genre.
履歴から (From record) . . . . . . . . . . . . . . . . . . Set a start point on the map previously
searched.
登録地点から (From stored point). . . . . . . . . Set a start point from the location
information stored in this software program,
on the server, or in the Phonebook.
自宅 (Home) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Set a start point from the location
information of your home.
出発地の確認 (Confirm start point) . . . . . . . . Confirm information about the start point.
フリーワード検索 (Keyword search) . . . . . Set a destination searching by keywords.
地図上で指定 (Specify on map) . . . . . . . . . . Set a destination on the map.
TEL／〒検索 (TEL/ZIP code search). . . . . . Set a destination searching by a phone
number or zip code.
住所一覧から (From address list) . . . . . . . . Set a destination selecting an address.
ジャンルから (From genre). . . . . . . . . . . . . . Set a destination selecting a genre.
履歴から (From record) . . . . . . . . . . . . . . . . . Set a destination on the map previously
displayed.
登録地点から (From stored point). . . . . . . . . Set a destination from the location
information stored in this software program,
on the server, or in the Phonebook.
自宅 (Home) . . . . . . . . . . . . . . . . . . . . . . . . . . . Set a destination from the location
information of your home.
目的地の確認 (Confirm destination) . . . . . . Confirm information about the destination.
現時刻で指定 (Specify by current time)
. . . Search for a route by the current time.
出発時刻指定 (Specify start time)
. . . Search for a route specifying the start time.
到着時刻指定 (Specify arrival time)
. . . Search for a route specifying the arrival time.
終電を利用 (Use last train)
. . . Search for a route by the last train of the day.
5
条件設定 (Set conditions)Select conditions
上記で設定 (Fix as specified above)
■Route (Car)/Navigation (Car) View display and its operation
乗換条件 (Transfer conditions)
. . . Select a transfer priority criterion of the transfer from “早い (Fast)”, “安い
(Cheap)”, and “楽々 (Easy)”.
徒歩ルート (Foot route)
. . . Select a route priority criterion from “おまかせ (Free)”, “屋根多い (Many
roofs)”, and “階段少ない (Less stairs)”.
特急利用 (Use special express)
. . . Select whether to use special expresses for even when the total distance is
less than 100 km.
通常利用車種 (Ordinary type of vehicles)
. . . Select a type of vehicle.
The route to
the destination
is displayed.
© 2008 ZENRIN DataCom CO., LTD.
Navigation (Car)
View display
ルートを検索 (Search for a route)
You can search for a route by “
で検索 (Search by
)” that
searches for all types of routes, or “
のみで検索 (Search by only
)” that
searches for routes only by car. Up to six routes are displayed as search results.
When the routes using different transportation are found, the characteristics of the
routes are displayed by the icons shown below:
早 (Fast): Required time is shorter.
安 (Cheap): Fare is lower.
楽 (Easy): The number of changing trains is fewer.
オススメ (Recommendable): Route provided with three conditions, “早 (Fast)”,
“安 (Cheap)”, and “楽 (Easy)”.
有料 (Charged): Route by car with giving a priolity for using toll roads
一般 (Ordinary): Route by car with giving a priolity for using ordinary roads
To store the route, select “ルートを登録 (Store route)”.
ルートを選択 (Select a route)
ナビ・ルート確認 (Navi/Confirm route)
ナビ開始 (Start navi)
Navigation to the destination starts.
To confirm the route, select “ルート確認 (Confirm route)”.
To simulate, select “シミュレート (Simulate)”.
◆Key operation when using Navigation
Key operation
Action
l(TOP)
Can end the Navigation program and show the TOP menu.
m[
切替
(Switch to
)]
Can switch to the intersection mode.
Oo[メニュー (Menu)] Can show the quick access menu.
i[縮小(Reduce)]
Can reduce the scale to display a large area.
c[拡大(Enlarge)
Can enlarge the scale to display the details.
Mo
Can move the map up, down, left, and right.
Can return to the current location.
Can pause or start the Navigation program.
Can turn the map counterclockwise.
Can turn the map northward.
Can turn the map clockwise.
Map/GPS Function
The current location
and proceeding
direction are
displayed.
333
◆Key operation when the quick access menu appears
Key operation
Zo[目的地周辺
Action
Can search for parking lots near the destination.
near the destination)]
Xo[結果＆設定
(Result&Settings)]
Can show search results of routes (time, fare, and others) or
set the navigation.
Co[経由地を設定
(Point setting)]
Can search for a route by adding up to three points you go
through to the destination.
Vo[リルート
(Re-route)]
Can re-search for a route from the current point to the
destination.
音声入力開始 (Start voice input)
Speak about the area information to search for.
After the Voice Input display appears, speak in Japanese about the area
information to search for.
Example: “Konohen-no Konbini” (nearby convenience store)
Using 音声入力 (Voice Input)
By voice input, you can easily check area information, get transfer
information, or read the map from the Voice Input menu.
When using Voice Input of 周辺検索 Local Search
TOP menu display周辺検索 Local Search
音声入力 (Voice Input)
The confirmation display appears after your voice
is recognized.
When the recognition result is wrong, select “音声
再入力 (Re-input voice)”.
The explanatory display for voice input appears.
Display for Map Talk function and its operation
Map/GPS Function
Map Talk function enables you to display position of friends on the map,
also, to exchange messages. You can display up to five positions of the
friends including the owner.
◆Map Talk in-use display
© 2008 ZENRIN DataCom CO., LTD.
334
◆How to invite
※Only the member can become owner (invite end) when 60 days passes, non member
can use the service only as a guest (invited end).
◆Key operation when the quick access menu appears
Oo[メッセージ履歴
TOP menu display便利ツール Utilitiy
地図トーク (Map Talk)
Select the nickname entry field
Enter a nickname (up to four characters)
ひとりをお誘い (Invite a friend) or ふたり以上をお誘い
(Invite two or more friends)
Send a mail message to a friend to be invited.
When you perform Map Talk with three or more person (including owner), the
owner need to set a four-digit numeric password.
◆How to join as a guest
A guest who is invited to Map Talk receive a Map Talk invitation mail message. Access
the site from URL on mail text, and start up Map Application.
※When you join Map Talk for the first time, register a nickname used on Map Talk.
※When you perform Map Talk with three or more person (including owner), you need to
enter a password set by the owner beforehand. Confirm it to the owner in advance.
◆Key operation on Map Talk display
Key operation
Action
Oo[メニュー (Menu)] Can show the quick access menu.
Can move the map up, down, left, and right.
Can send photo-message.
Can switch the person to be displayed on the center of the map.
l(TOP)
Can show the TOP menu.
Can send message.
[メッセージ(Message)]
i[縮小(Reduce)]
Can reduce the scale to display a large area.
c[拡大(Enlarge)
Can enlarge the scale to display the details.
Action
Can show message history.
(Message history)]
Xo
Can end Map Talk.
[トーク終了(End talk)]
Co[待合わせ設定
(Meeting setting)]
Can set meet point.
※This is displayed only for the owner.
Vo[もっと誘う
(Invite more)]
Can invite more friends.
※This is displayed only for the owner.
Using Settings/Help
TOP menu display設定／ヘルプ Setting/Help
Select an item.
各種設定
(Settings)
You can perform the application basic setting, route setting, home
setting or nearby station setting, erase all records, and initialize
the application setting.
ヘルプ・規約
(Help/Rules)
You can get explanation about how to browse PC site “いつもガ
イド (All time guide)”, how to use, FAQ, and usage rules.
会員情報確認
(Confirm member
information)
You can check whether you are registered as a member of “ゼン
リン
地図＋ナビ (ZENRIN/map+navi)”.
Ver確認更新
(Confirm/Update
version)
You can confirm the version or update information of the
application or update application.
お知らせ
(Information)
You can check the latest news about the service or information.
335
Map/GPS Function
Mo
Key operation
Providing Location Information on
Request
You can provide your location information on the request from others.
Depending on the service you use, you need to set GPS service settings
beforehand. (See page 338) Also, you need to set “Location request
menu” to the setting for permitting providing location beforehand.
When a location provision request
arrivesYES or NO
YES . . . . Measures the current location and sends the
location information.
NO . . . . . Rejects to provide the location information.
If no keys are pressed for about 20 seconds, the former
display returns without providing your current location.
Map/GPS Function
When a location provision request
arrivesOK
When you select “OK” or about three seconds elapse,
the current location provision starts.
The information of the service provider might not be
displayed.
Press r to stop providing information. However, your
location information might be sent depending on the
timing.
Information
If no keys are pressed for about 15 seconds from the Position Location Result display
or the Failure display, the former display returns.
To use “imadoco-search”, you need to set “お客様サポート(user support)” → “その
他のサービス設定・確認(Other Service Settings/Confirmation)” → “位置情報利用
設定（イマドコサーチ設定）[Location Information Usage Setting (imadoco-search
Setting)]” on Japanese iMenu.
To use Provide Location, you might need to subscribe to a service provider which
supports the Provider Location function or to pay the service fee.
336
Information
Even when you send your location information, it might not be delivered to the service
provider depending on the radio wave conditions.
The location information is not displayed and the request is rejected in the following
cases:
・When “Location request menu” is set to “OFF”.
・When you receive a location provision request from the other party not stored in
Phonebook while “Location request menu” is set to “Reject numbers unset”.
・When you receive a location provision request out of the varidity period set by
“Location request menu”.
When you set, by GPS service settings, the location request to be checked every
time, the location information is not provided on the location provision request during
Public Mode (Drive Mode).
When you set, by GPS service settings, the location request to be accepted, the
location information is provided with a display during Public Mode (Drive Mode) but
the positioning ring tone, vibrator, and illumination do not work.
When you are requested to provide your location information from the other party
using “imadocokantan search”, the confirmation display appears asking whether to
send the current location information each time you receive a request. Select “YES” to
immediately send the rough position location result. After selecting “YES”, the GPS
Measuring display appears and the precise position location result is notified after
GPS measuring. The rough position location result is notified even if you suspend the
location providing during GPS measuring. In this case, it is stored in Location History
but the location information is not displayed.
Regardless of the mode of 2in1, the location information can be searched for Number
A only.
When the other party searches you by your Number B, your current location is not
provided and the searcher is notified that the search has failed.
A fee is not charged for using the Provide Location function.
For using the service, refer to the information on your service provider or the
DOCOMO website.
Notifying Location Information
Displaying History of Checked Location
Information
You can notify a service provider of your current location.
mLifeKitMap/GPSNotify of location
Direct inputEnter a party to be notifiedYES
You can enter up to 12
digits by using numerals, #
and :.
If you have stored LCS
clients by “Reg. LCS client”
beforehand, you can select
an LCS client from “View
service clients”.
You can press
l(
) to stop
measuring, but your current
location might be notified
depending on the timing.
OK
Information
mLifeKitMap/GPS
Location history
Select a location history.
: Position location
: Provide location
: Notify of location
Information
When the location histories exceed 50, they are automatically overwritten from the
oldest one.
The location information and accuracy stored in Location History may differ from the
ones sent to the location provision requester or LCS client depending on the radio
wave conditions, and others.
When you cancel Position Location midway, you fail to measure your current location,
or you refuse the location provision request by the setting of “Location request menu”,
its history is not stored in Location History.
Even when the histories of Provide Location or Notify of Location are stored, they
might not have been delivered to your service providers.
You cannot operate a failed-to-measure history of Provide Location or Notify of
Location for other than “Add to phonebook (except “Store loc. info”)”, “Compose
message”, “Dialing”, and “Delete”.
When Provide Location was used, the name of the location provision requester is checked
against the Phonebook entries which appear in each mode of 2in1 and then shown.
When the phone number of the location provision requester is stored in “Own number”,
the name of the location provision requester is not displayed on Location History.
“
” is displayed for the records of successful positioning.
Function Menu while Location History is Displayed
Read map
See page 329.
Map/GPS αppli
See page 329.
Paste to mail
See page 329.
337
Map/GPS Function
Even when you send your location information, it might not be delivered to the service
provider depending on the radio wave conditions.
You are charged a fee for using the function to notify your current location.
To use Notify of Location, you might need to subscribe to a service provider that
supports Notify of Location. Further, you might be charged a fee for using the service.
You cannot enter any digits during Keypad Dial Lock.
Regardless of the mode of 2in1, your location information is notified by Number A.
For using the service, refer to the information on your service provider or the
DOCOMO website.
Up to 50 histories of Position Location, Notify of Location, and Provide
Location are stored.
Add to phonebook
You can store the location information, phone number, or mail
address in the Phonebook.
Store loc. info., Store phone number, or Store mail
addressYES
Go to step 2 of “Storing Displayed Phone Number/Mail
Address in Phonebook” on page 95.
Attach to image
See page 329.
Compose message
You can compose an i-mode mail message to your location
provision requester.
Go to step 3 on page 146.
Dialing
GPS button setting
You can set a function which is performed after measuring
your location by pressing and holding 1 for at least one
second from the vertical Stand-by display. You can select it
from the “Function Menu while Current Location is Displayed”
on page 329.
Select a function.
If you set to “Confirm every session”, you can select a
function each time you measure the location.
Posit. tone/illum.
See page 339.
Positioning mode
Select a mode for measuring the current location from either
“Standard mode” or “Quality mode”.
When you select “Quality mode”, it takes a longer time for
measuring, but the measuring accuracy might be improved as
a result.
You can set a measuring mode for Position Location, Notify of
Location, and Provide Location respectively.
Select an operation to be set
Standard mode or Quality mode
Reg. LCS client
See page 339.
See page 249.
Delete
Delete this
YES
Delete all
Enter your Terminal Security CodeYES
Setting GPS
mLifeKitMap/GPSGPS settings
Do the following operations.
Location request menu See page 340.
Service settings
By connecting to GPS service settings (a host set by “Host
selection”), you can configure the settings for the Provide
Location service such as the permission for location
information search and password.
See page 195 for operations while a site is displayed.
However, you cannot use the Bookmark or Screen Memo
function.
Host selection
See page 342.
Map/GPS Function
Map setting
Select map
You can select a GPS compatible i-αppli program for using for
displaying a map from “Map” or location information.
Select an i-αppli program.
See page 205 when you select “Search by i-mode”.
Map activate setting You can set whether to start the GPS compatible i-αppli
program after checking the current location when displaying a
map.
Start after locating or Start without locating
338
Positioning Tone/Illumination
You can select a tone to sound for when you check your current location
or when you are requested to provide location information. You can set a
color of the Call/Charging indicator and the vibration pattern as well.
mLifeKitMap/GPSGPS settings
Posit. tone/illum.Select an operation to be set
Do the following operations.
Select posit. ring
tone
Select a folderSelect a ring tone.
While selecting, the selected tone sounds for confirmation.
Ring time setting
You can set a ring time for positioning ring tone.
Enter a ring time (seconds).
Enter two digits from “00” through “30”. For “Location req./
Confirm”, however, enter two digits from “00” through “20”. If
you set to 0 seconds, the tone does not sound.
Select vibrator
Select a vibration pattern.
If you select “Melody linkage”, the FOMA terminal vibrates in
time with ring tone.
While selecting, the FOMA terminal vibrates by the selected
pattern for confirmation.
Register LCS Client
If you have stored LCS clients, you can select an LCS client when you
notify of your current location. Further, you can automatically notify of
your current location when you make a call to the stored phone number.
You can store up to five LCS clients.
mLifeKitMap/GPSGPS settings
Reg. LCS clientHighlight and press
l(
) or Oo(
Do the following operations.
If you select a stored LCS client, you can confirm the stored contents.
Service client name Enter a service client name.
You can enter up to 16 full-pitch/32 half-pitch characters.
Enter a service client ID.
You can enter up to 12 digits by using numerals, # and :.
Enter the service client ID specified by your service provider.
Phone number
Enter a phone number.
You can enter up to 26 digits.
Highlight the phone number field, press i(
), and
select “Enter from PB” to call up a phone number from the
Phonebook and enter it.
If you enter a phone number by “Enter from PB” with “Service
client name” not entered, the name for the Phonebook entry is
entered.
Select illumination Select an item.
While selecting, the Call/Charging indicator lights/flickers for
confirmation.
Notify when dialing You can set whether to notify of your current location for when
you make a voice call or videophone call to the stored phone
number.
ON, OFF or Confirm every dial
To check each time you make a call, select “Confirm every dial”.
Press l(
).
339
Map/GPS Function
Service client ID
Information
Even if “Notify when dialing” is set to “ON” or to “Confirm every dial”, you cannot notify
of your current location when you make a call without notifying of your caller ID.
Function Menu while LCS Client is Displayed
Delete
Delete this
Delete all
Enter your Terminal Security CodeYES
You can store the service client name and phone number
stored in “Reg. LCS client” into the Phonebook. (See
page 329)
Edit
Go to step 1 of “Register LCS Client” on page 339.
You can edit also by pressing l(
).
Send Ir data
See page 386.
Send all Ir data
See page 387.
All
transmission
See page 388.
See page 389.
Map/GPS Function
Location Request Menu
You can set how to operate when you receive a location provision
request. You can set validity period as well when you set to the setting
for permitting providing location.
mLifeKitMap/GPSGPS settings
Location request menu
Enter your Terminal Security CodeSelect an item.
ON . . . . . . . . . . . . . . . . . . . Permits providing location requested from all searchers
and notifies current location.
OFF . . . . . . . . . . . . . . . . . . Refuses location request.
Reject numbers unset . . Permits providing location requested only from the
other party stored in Phonebook.
Requests from the other party not stored in Phonebook
are automatically refused.
340
YES or NO
Permit from
Enter the time for starting permission.
Permit to
Enter the time for ending permission.
Repeat
Select a repeat type.
When you select “Select day”, put a check mark for days of the
week to be repeated, then press l(
).
Validity period
When you set to “Repeat”, you can set the period to be valid.
ON or OFFEnter a validity date (from)
ON or OFFEnter a validity date (to).
YES
Add to phonebook
transmission
Press l(
).
Information
You can set “Location request menu” also by “Initial setting” (see page 46).
When you set to the setting for permiting providing location, the location information
might be sent without any operation on the FOMA terminal, and might be notified to
the searcher.
When you refuse location provision request by the setting of “Location request menu”,
its history is not stored.
You can specify from January 1, 2008 through December 31, 2037 for “Permission
schedule”.
When “Reject numbers unset” is set, regardless of the mode of 2in1, location
provision requests from the other party stored in all the Phonebook entries are
permitted.
Even if “Reject numbers unset” is set, you might receive a location provision request
from the other party not stored in Phonebook depending on the functions in use.
■Operations when the validity period for location provision is specified
Example: When the current date and time are 12:00/18/Nov and you set 14:00 as the
start time and 21:00 as the end time
Repeat
Validity period
1 time
Daily
Select day
—
Period of location provision
14:00/18/Nov through 21:00/18/Nov
OFF
14:00 through 10:00 of the next day on and after
18/Nov
Start date: 20/Nov
End date: 30/Nov
14:00 through 10:00 of the next days of the specified
days of the week from 20/Nov through 30/Nov
14:00 through 21:00 of the specified days of the
week from 18/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
14:00 through 10:00 of the next days of the specified
days of the week from 18/Nov through 30/Nov
14:00 through 21:00 of the specified days of the
week on and after 18/Nov
OFF
14:00 through 10:00 of the next days of the specified
days of the week on and after 18/Nov
OFF
Every day 14:00 through 21:00 on and after 18/Nov
Start date: 20/Nov
End date: 30/Nov
14:00 through 21:00 of the specified days of the
week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
OFF
Daily
Period of location provision
Select day
Example: When the current date and time are 12:00/18/Nov and you set 10:00 as the
start time and 10:00 as the end time
Repeat
12:00/18/Nov through 21:00/18/Nov
1 time
Start date: 20/Nov
End date: 30/Nov
Every day 10:00 through 21:00 from 20/Nov through
30/Nov
Daily
Start date: 10/Nov
End date: 30/Nov
Validity period
—
Period of location provision
12:00/18/Nov through 10:00/19/Nov
Start date: 20/Nov
End date: 30/Nov
10:00/20/Nov through 10:00/1/Dec
12:00/18/Nov through 21:00/18/Nov, every day
10:00 through 21:00 from 19/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
12:00/18/Nov through 10:00/1/Dec
OFF
12:00/18/Nov through 21:00/18/Nov, every day
10:00 through 21:00 on and after 19/Nov
OFF
Start date: 20/Nov
End date: 30/Nov
10:00 through 21:00 of the specified days of the
week from 20/Nov through 30/Nov
12:00/18/Nov through 10:00/19/Nov, every day
10:00 through 10:00 of the next day on and after
19/Nov
Start date: 10/Nov
End date: 30/Nov
If 18/Nov is the specified day;
12:00/18/Nov through 21:00/18/Nov, 10:00 through
21:00 of the specified days of the week from 19/Nov
through 30/Nov
Start date: 20/Nov
End date: 30/Nov
10:00 through 10:00 of the next days of the specified
days of the week from 20/Nov through 30/Nov
Start date: 10/Nov
End date: 30/Nov
OFF
If 18/Nov is the specified day;
12:00/18/Nov through 21:00/18/Nov, 10:00 through
21:00 of the specified days of the week on and after
19/Nov
If 18/Nov is the specified day;
12:00/18/Nov through 10:00/19/Nov, 10:00 through
10:00 of the next days of the specified days of the
week from 19/Nov through 30/Nov
OFF
If 18/Nov is the specified day;
12:00/18/Nov through 10:00/19/Nov, 10:00 through
10:00 of the next day of the specified days of the
week on and after 19/Nov
Select day
341
Map/GPS Function
Select day
—
Period of location provision
14:00/18/Nov through 10:00/19/Nov
14:00 through 10:00 of the next day from 18/Nov
through 30/Nov
Every day 14:00 through 21:00 from 18/Nov through
30/Nov
Daily
—
Start date: 10/Nov
End date: 30/Nov
Start date: 10/Nov
End date: 30/Nov
Validity period
Validity period
14:00 through 10:00 of the next day from 20/Nov
through 30/Nov
Every day 14:00 through 21:00 from 20/Nov through
30/Nov
Example: When the current date and time are 12:00/18/Nov and you set 10:00 as the
start time and 21:00 as the end time
Repeat
Repeat
1 time
Start date: 20/Nov
End date: 30/Nov
Start date: 20/Nov
End date: 30/Nov
1 time
Example: When the current date and time are 12:00/18/Nov and you set 14:00 as the
start time and 10:00 as the end time
Host Selection
※Normally, you do not need to change this setting.
You can use this setting for changing the host for Service Settings.
mLifeKitMap/GPSGPS settingsHost selection
Highlight and press l(
).
If you select a stored host, the setting is changed to that host.
To delete a stored host, press i(
), select “Delete” and select “YES”.
Do the following operations.
Host name
Enter a host name.
You can enter up to 9 full-pitch/18 half-pitch characters.
Host number
Enter a host number.
You can enter up to 99 half-pitch alphanumeric characters.
Host address
Enter a URL.
You can enter up to 100 half-pitch alphanumeric characters.
Press l(
Map/GPS Function
342
).
Data Management
Data Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
Making Full Use of Still Images
Displaying Images . . . . . . . . . . . . . . . . . . . . . 346
Editing Still Images. . . . . . . . . . . . . . . . . . . . . . . . 350
Creating Animations. . . . . . . . . . . . . . . . 352
378
378
379
379
380
Making Full Use of Various Data
Making Full Use of Movies
Playing Movies/i-motion. . . . . . . . . . . . . . . . . 353
Using Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Editing Movies/i-motion . . . . . . . . . . . . . . . . . . 358
Making Full Use of Video
Playing Video . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
Making Full Use of Chara-den
Chara-den . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
Displaying/Operating Chara-den Images
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
Recording Chara-den Images . . . . . . . . . 364
Making Full Use of Machi-chara
Displaying Machi-chara Images . . . . . . . . . . . . 365
Managing Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
382
Making Full Use of Infrared Communication
Using Infrared Communication . . . . . . . . . . . . . . . . . . . . . . . . .
Sending/Receiving One or Multiple Data . . . . . . . . . . . . . . . . . .
Sending/Receiving All Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Infrared Remote Control Function. . . . . . . . . . . . . . . . . .
Communication Setting. . . . . . . . . . . . . .
384
386
387
388
388
Making Full Use of iC Communication Function
iC Communication Function . . . . . . . . . . . . 388
Sending/Receiving One Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
Sending/Receiving All Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
Making Full Use of Voice Recorder
Using Voice Recorder . . . . . . . . . . . . . . . . . . 389
Making Full Use of Melodies
Playing a Melody. . . . . . . . . . . . . . . . . . . . . . . 366
Making Full Use of PDF Viewer
Displaying PDF Data . . . . . . . . . . . . . . . . . . . . . . 390
Making Full Use of Kisekae Tool
Checking Kisekae Tool . . . . . . . . . . . . . . . . . . 369
Making Full Use of microSD Card
microSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting/Removing microSD Card . . . . . . . . . . . . . . . . . . . . . . .
Displaying Data Items on microSD Card . . . . . . . .
Copying Still Images, Movies, etc. . . . . . . . . . . . . . . . . . . . . . . .
Moving Copyrighted Files . . . . . . . . . . . .
Back up/Restore Data Files Collectively . . . . . . . . . . . . . . . . . .
Managing Unsupported Files . . . . . . . . . . . .
Formatting microSD Card . . . . . . . . . . . . . .
Checking microSD Card . . . . . . . . . . . . . . . .
Displaying Capacity of microSD Card . . . . . . .
Using a microSD Card with a Personal Computer . . . . . . . . . .
Folder Configuration on microSD Card . . . . . . . . . . . . . . . . . . .
370
370
371
374
376
377
378
Making Full Use of Document Viewer
Displaying Word, Excel, and PowerPoint Files
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
Printing Still Images
Printing Saved Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
396
Displaying Images on TV
Displaying Still Images or Movies/i-motion on TV
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
343
MUSIC
i-mode
Data Box
Data Box contains the items and folders as listed below. Data is saved to
respective folders according to the contents.
Data Management
My picture
i-mode
Search by i-mode
Camera
Decomail-picture
Search by i-mode
Decomail- お気に入り (Favorite)※1
pictograph i絵文字 (ipictograph)※1
装飾 (Decoration)※1
ハート・キラキラ
(Heart/Sparkling)※1
天気・季節
(Weather/Season)※1
移動・生活 (Transfer/Life)※1
電話・メール (Phone/Mail)※1
食べ物 (Food)※1
キャラクター
(Cartoon character)※1
文字 (Character)※1
Search by i-mode
Pre-installed
User folder※2
Original animation
Frame
Stamp
Search by i-mode
microSD Picture
Downloaded still images, etc.
Connects to the data site.
Still images shot by the camera, shot Chara-den
images, etc.
Still images to be used for creating Deco-mail
Connects to the data site.
Pictographs to be used for creating Deco-mail
You can delete the pre-installed Deco-mail pictograms.
You can re-download them from the “P-SQUARE” site
(see page 206). When you use a UIM other than the
one used for downloading, the UIM security function
(see page 39) is set for them.
Connects to the data site.
Pre-installed still images
Still images in the user folder
The function of displaying still images continuously
Still images to be used for frames
Still images to be used for marker stamps
Connects to the data site.
Still images shot by the camera, and images in JPEG
format and GIF format that conform to the DCF
standard and were copied from the FOMA terminal
Image Box
Animation images in GIF format copied from the
FOMA terminal, and images in JPEG format that do
not conform to the DCF standard
Movable contents
Copyrighted still images moved from the FOMA terminal
Decomail-pictograph Deco-mail pictograms copied from the FOMA terminal
344
Initial folder
Search by i-mode
User folder※2
Search by i-mode
microSD
WMA
Music&Video Channel
Downloaded program
Saved program
imotion
i-mode
Search by i-mode
Camera
Pre-installed
Voice recorder
User folder※2
Playlist
Position memory
Search by i-mode
microSD Movie
Movable contents
Other contents
Melody
i-mode
Search by i-mode
Pre-installed
User folder※2
Voice announce
Playlist
Search by i-mode
Chaku-uta Full® music files obtained from sites
Connects to the data site.
Chaku-uta Full® music files in the user folder
Connects to the data site.
Copyrighted Chaku-uta Full® music files downloaded
or moved from the FOMA terminal
WMA files obtained from personal computer
Programs downloaded via Music&Video Channel
Programs saved to the FOMA terminal
i-motion movies obtained from sites, etc.
Connects to the data site.
i-motion movies recorded by the camera, shot
Chara-den movies, etc.
Pre-installed i-motion movies
Voices recorded by the voice recorder
i-motion movies in the user folder
Playback of playlist
Playback of marker position
Connects to the data site.
Movies shot by the camera or copied from the FOMA
terminal
Copyrighted movies moved from the FOMA terminal
Voice-only i-motion movies※3 recorded by using the
camera function, voice-only i-motion movies※3 copied
from the FOMA terminal, or video-unplayable i-motion
movies※3 copied from the FOMA terminal
Downloaded melodies, etc.
Connects to the data site.
Pre-installed melodies
Melodies in the user folder
Data files recorded by using “Voice announce”
Playback of playlist
Connects to the data site.
microSD Melody
Movable contents
My documents
i-mode
microSD
Kisekae Tool
Search by i-mode
microSD
Machi-chara
Search by i-mode
microSD
Melodies copied from the FOMA terminal
Copyrighted melodies moved from the FOMA terminal
■Icons in the File list
Pre-installed or downloaded PDF files, etc.
PDF files downloaded or copied from the FOMA
terminal
Connects to the data site.
Kisekae Tool files downloaded, or moved from the
FOMA terminal
Picture
Icon
Type
Still image
Connects to the data site.
Machi-chara images downloaded, or moved from the
FOMA terminal
※1 The folder names can be changed by “Edit folder name”. Deco-mail pictograms are
directly saved to these folders, and files other than Deco-mail pictograms cannot be
saved to them.
※2 The folder names you have entered for “Add folder” are displayed.
※3 Includes the music files in AAC format.
※
File format
JPEG
Still image with location information
JPEG
Still image/Animation image
GIF
Frame
GIF
Marker stamp
GIF
Flash movie
SWF
i-motion movie
MP4 (AMR)
i-motion movie
MP4 (AAC)
i-motion movie
MP4 (AAC+[HE-AAC])
i-motion movie
MP4 (Enhanced aacPlus)
i-motion movie
ASF
Video
MPEG2-TS
Divided recorded video
MPEG2-TS
Video already viewed
MPEG2-TS
Video not viewed yet
MPEG2-TS
Partially saved i-motion movie
—
Melody
SMF
Melody
MFi
Complete PDF file
PDF
Partial PDF file
PDF
Incomplete PDF file
PDF
Damaged PDF file
PDF
Data Management
Chara-den
Pre-installed or downloaded Chara-den images
PC Movie
microSD
PC movies downloaded, or saved by personal
computer
Position memory
Playback of marker position
Played history
Playback histories of PC movies
1Seg
Image
Still images recorded by 1Seg
Video
Video recorded by 1Seg, and copyright-protected and
1Seg compatible movies made with other AV devices
Position memory
Playback of marker position
Document viewer
Document files saved from mail (attached files)
SD other files
SD others
Incompatible files saved from mail (attached files), or
files in BMP or PNG format obtained by Full Browser
Title name
File Type
345
Icon
Type
File format
Data Management
Kisekae Tool file
Partially saved Kisekae Tool file
—
Upload
Machi-chara image
—
Using location information
Partially saved Machi-chara image
—
Chara-den image
—
Word file
WORD
Excel file
EXCEL
PowerPoint file
POWERPOINT
Incompatible file
—
Icon
You can display the still images saved to the FOMA terminal or microSD
card. In Horizontal Open Style, still images are displayed horizontally.
You can switch styles during display.
Description
Folder list
Still Image list
The image on the right is displayed when you cannot display a
preview image:
Obtained from infrared communication or iC communication or microSD
card
Files of recorded Chara-den images
When selecting folders or still images by another function, some
folders or still images may not be displayed depending on the function. You may
at times be able to confirm the still image by pressing l(
) while you are
selecting it.
See page 205 when you select “Search by i-mode”.
Files of recorded 1Seg programs
Icon
“ is displayed.
Description
Attach to i-mode mail
Insert images into Deco-mail, or create Decome-Anime messages
Set display
Send Ir data, iC transmission
mData boxMy pictureSelect a folder
Select a file.
Each time you press m
from the Folder list, you can
switch between the folders
in the FOMA terminal and
the microSD card.
See page 382 for the
Function menu of the
Folder list.
Obtained from sites or i-mode mail attachment
※For the copyrighted file movable to the microSD card, “
Available operation
+m-4-6
Displaying Images
Files shot by the FOMA terminal, or recorded by the voice recorder
346
Description
Copy to microSD card
※For the video recorded by the device other than this FOMA terminal, the icon for
already viewed video is displayed.
For the file with the file restrictions, “
” is added to each icon.
Some files have restrictions on the number of playbacks, playable period, or playable
deadline. “ ” is added to the icon of the file with playback restrictions and “ ” is
added to the icon of the file with playback restrictions expired.
Acquired source
※
Icon
—
Display Images Recorded by 1Seg
mData box1SegImageSelect a file.
■Operations when playing back still images
See page 350 for when you operate from the Function menu.
Operation
Display picture
You can display the image.
Set display
You can paste the image to the Stand-by display and other
displays for displaying. See “Positioning” for the position to
which you paste the still image.
Select the display you paste it to.
“★” is displayed for the pasted items but not for the
videophone related items other than “Videophone dial” or
“V.phone incoming” even if already pasted.
If you select the videophone related items other than
“Videophone dial” or “V.phone incoming”, an appropriate
message is displayed at the center of the still image.
Picture info
You can display the still image title, file name and others.
The item of “Set display” only is displayed for “Picture info” of
original animations.
Key operation
Display the next file※1
Vo
Display the previous file※1
Co
Zoom (Enlarge/Reduce)※2
Oo(
i(
) or l(
) to display enlarge/
reduce during zooming
Oo(
) to return to the original size
Icon
[Horizontal Open Style only]
c(
)※3
Each time of pressing switches whether to display
icons and navigations.
Location info
Attach location
■Specifications for playing back still image files
File format
JPEG※1, GIF, Flash
Extension
jpg, gif, swf, ifm
Pixels
File size
Files of 5M (1944 x 2592) size or smaller※2
Still images of 2 Mbytes or less
※1 The types of JPEG file you can play back are Baseline and Progressive of the Exif/
CIFF/JFIF format.
※2 For the file in the Progressive format, you can display the file of VGA (480 x 640)
size or smaller.
You cannot display some files even if their file formats are supported.
YES
To delete the stored location information, select “Delete loc.
info”.
Function Menu of the Still Image List
Edit picture
See page 350.
Edit title
Enter a title.
For a file in the FOMA terminal, you can enter up to 9
full-pitch/18 half-pitch characters.
For a file on the microSD card, you can enter up to 18
full-pitch/36 half-pitch characters.
Select an item.
By position loc.
. . . Measures the current location (see page 328) and stores
the location information. After checking the location
information, press Oo(
).
From loc. history
. . . Select a piece of location information from Location
History (see page 337) and store it.
From phonebook
. . . Select a Phonebook entry which contains the location
information for storing.
From own number
. . . Stores the location information from “Own number”. Enter
your Terminal Security Code and press Oo(
).
Delete loc. info
You can delete the location information stored in the image.
YES
Details
You can check the location information detail.
If you press i(
) while displaying the detail, the
Function menu for the location detail is displayed.
(See page 329)
347
Data Management
※1 Files are displayed in the order on the Still Image list.
※2 You cannot operate depending on the image size or file format.
※3 Even if you set the icons not to be displayed, the icon such as “ ”, “ ”, “ ” or “ ”
appears during communication or when an i-mode mail message or Message R/F
comes in.
Attach to mail
Go to step 2 on page 146.
You can compose an i-mode mail message also by pressing
l(
).
Decorate mail
You can create Deco-mail using data in the “Decomail-picture”
folder or “Decomail-pictograph” folder.
Go to step 2 on page 146.
See page 150 for Deco-mail.
Send Ir data
See page 386.
Data Management
transmission
Slideshow
All still images are consecutively displayed starting from the
still image selected in the folder. You can select the speed the
still image switches at.
Normal or Slow
Press Oo(
) to stop Slideshow. Press Oo(
again to resume Slideshow.
Copy
You can copy the still image, movie, PDF file, document file, or
SD other file on the microSD card to another folder on the
microSD card.
Select a destination folder.
Move
You can move the still image, movie, PDF file, document file,
Kisekae Tool file, or SD other file to another folder.
Select a destination folder.
Press l(
) to display folders at the second-tier level
or lower, if they exist. Press r to return to the upper level.
See page 388.
Add desktop icon
See page 31.
Copy to microSD
See page 374.
Store in Center
See page 140.
Copy to phone
See page 375.
Move to microSD
See page 376.
Delete this
YES
Move to phone
See page 376.
Delete all
Positioning
You can set the position for when you paste the still image to
the Stand-by display, etc.
See page 347 for “Set display”.
Select a position for displaying.
You can delete all files in the folder.
Enter your Terminal Security CodeYES
Multiple-choice
You can select multiple files and operate them.
Put a check mark for the files to be operated
i(
)Select an item.
Picture/Title name/Listing
. . . . . . . . . . . . . . . . . . . See page 349, page 369 and
page 391.
Delete . . . . . . . . . . . . . See “Delete this” on page 348.
DPOF setting . . . . . . . See page 396.
Copy . . . . . . . . . . . . . . See page 348.
Move . . . . . . . . . . . . . . See page 348.
Copy to microSD. . . . See page 374.
Copy to phone . . . . . . See page 375.
Send Ir data . . . . . . . . See page 386.
Select all . . . . . . . . . . . Selects all files.
Release all . . . . . . . . . Releases all selected files.
Edit file name
Enter a file name.
You can enter up to 36 half-pitch alphanumeric characters
and symbols (only “.”, “-”, “_”).
File restriction
If you set “File restricted” for the file, the operation of attaching
to i-mode mail is disabled at the receiving end who receives
the image as the first distribution.
File unrestricted or File restricted
See page 247 for the file restrictions.
DPOF setting
See page 396.
348
Memory info
You can display the used memory space (estimate).
Sort
You can change displayed order.
Select an order.
You cannot sort the files on the microSD card.
Picture/Title name
You can switch the lists of still images.
You can switch the lists also by pressing c(
the Still Image list.
Information
) from
Information
349
Data Management
You may not be able to edit the title depending on the file.
You may not be able to execute Display Picture depending on the file.
Flash movies are played back at the volume set for “Phone” of “Ring volume”. When
“Phone” of “Ring volume” is set to “Step”, they are played back at “Level 2”.
Flash movies can be pasted only to “Stand-by display”, “Wake-up display”, “Dialing”,
“Calling”, “Videophone dial”, “V.phone incoming”, “Mail sending”, “Mail receiving”,
“Checking”, and “Mail/msg. rcpt result”.
Animation GIF images cannot paste to the videophone related items other than
“Videophone dial” or “V.phone incoming”.
The displayed size might differ from the actual size depending on the image size or
the display pasted to.
You cannot execute “Set display” for some image files.
You may not be able to compose i-mode mail depending on the image.
See page 247 for attaching a file set with the file restriction to mail.
When an image size is larger than Sub-QCIF (96 x 128) size, the display for selecting
how to convert the image size appears. The converted still image is saved as a
separate new file.
Select “Attach directly”; then the image size does not change.
Select “Sub-QCIF scale down”; then the image size is scaled down to Sub-QCIF (96 x
128) size or smaller with its proportional ratio retained.
Select “Sub-QCIF trim away”; then the image size is scaled down or cut out to
Sub-QCIF (96 x 128) size or smaller with its proportional ratio retained.
If the file size exceeds the maximum size to create a Deco-mail message, its size is
converted to the maximum size to create a Deco-mail message or less.
Even if you scale down or cut out the still image to Sub-QCIF (96 x 128) size, you can
again scale down or cut it out by pressing +l(
), or pressing +i(
) and
selecting “Cancel”. When you press +i(
) and select “Set”, the Message
Composition display appears.
Depending on the image, you may not be able to create a Deco-mail message.
You may not be able to edit the file name depending on the file.
You cannot use half-pitch space for the file name.
You may not be able to set the file restrictions depending on the file.
Flash movies are not displayed.
The time interval to show the images might differ depending on the image.
If a call comes in while copying/moving multiple files, copying/moving is canceled
even midway.
If a call comes in while deleting multiple files, deleting is canceled.
You can select up to 3,500 still images, movies, melodies, PDF files, Kisekae Tool
files and machi-chara images, and up to 100 videos, document files and SD other
files.
When you use “Picture” to display still images, some images may appear different.
Function Menu while Playing Back Still Image
Edit picture
See page 350.
Set display
See page 347.
Picture info
See page 347.
Editing Still Images
When the still image is not the Stand-by (480 x 854)
size and is larger than VGA (480 x 640) size, it is
reduced to VGA (480 x 640) size.
Location info
Attach location
See page 347.
Delete loc. info
See page 347.
Details
See page 347.
Attach to mail
See page 348.
Decorate mail
See page 348.
Send Ir data
See page 386.
Data Management
transmission
Display size
Add desktop icon
See page 31.
Copy to microSD
See page 374.
Store in Center
See page 140.
Copy to phone
See page 375.
Positioning
See page 348.
DPOF setting
See page 396.
Delete
See “Delete this” on page 348.
Retry
You can play back the animation or Flash movie from the
beginning.
350
Edit Picture display
See page 388.
You can set whether to display the still image in original size
(normal size) or to fit to the display size.
Normal or Fit in display
Even if you set to “Normal”, the still image in excess of the
display size is reduced to the display size. Also, when the
still image is QCIF (176 x 144) size or smaller, it is doubled
at both lengthwise and sidewise to be displayed.
Still Image list/Still image in play
i(
)Edit picture
i(
)Edit the still image.
See page 351 to page 352 for how to operate.
Oo(
)YES or NO
YES . . . Overwrites the image to save.
NO . . . . Saves the image as a new still image.
When you edited still image on the microSD card, you cannot overwrite it to save.
press Oo(
) to save to “i-mode” folder.
Not to save the edited still image, press r or h; then select “YES”.
See page 205 when images are stored to the maximum.
■The size of still image you can edit
5M, 3M, 2M, 1M,
VGA, QVGA,
QCIF, Sub-QCIF
3.7M Wide,
2M Wide
Marker stamp
○
○
○
○
Frame
○
—
○
—
Character stamp
○
○
○
○※1
Edit menu
Other sizes
Stand-by smaller than
VGA
5M, 3M, 2M, 1M,
VGA, QVGA,
QCIF, Sub-QCIF
3.7M Wide,
2M Wide
Fit in screen
○
○
○
Change size
○
○
○
○
Trim away
○
○
○
○※2
Edit menu
Other sizes
Stand-by smaller than
VGA
Function Menu of the Edit Picture Display
Marker stamp
○
Retouch
○
○
—
○
Rotate
○
○
○
○
Brightness
○
○
○
○
Attach to mail
○
○
○
○
Use Mo to position the marker stamp and press
Oo(
).
You can add a marker stamp by pressing l(
).
Oo(
Select a frameOo(
You can add the frame whose size is the same as the size of
the image you are editing.
You can display the previous or next frame by pressing No.
Press and hold No for at least one second to display
sequentially.
You can rotate the frame by pressing i(
) and
selecting “180° rotation”.
You can reselect a frame by pressing l(
).
Character stamp
You can add text.
Enter characters.
You can enter up to 15 full-pitch/30 half-pitch characters.
However, the number of characters you can enter decreases
depending on the size of the still image.
Press i(
) and select “Character color” to select a
color; then, you can change the color of characters. You can
switch between “16 Color” and “256 Color” by pressing
c(
).
Select “Font” to change the character fonts.
Select “Character size” to enlarge or shrink characters.
Select “Character input” to edit entered characters.
Information
You can execute “Edit picture” only for the “File unrestricted” files of still images shot
by the cameras, obtained by data communication, downloaded from sites, or retrieved
from i-mode mail.
You cannot edit some still images, or you might have difficulty to produce editing
effect.
If you repeat editing image, the image quality may deteriorate or the file size may
become larger.
You may not be able to edit some still images whose size are changed.
The file name, title, storage location, and acquired source of the newly saved still
image are as follows:
・File name: “YYYYMMDDhhmmnnnn”
Title: “YYYY/MM/DD hh:mm”
(Y: year, M: month, D: date, h: hour, m: minute, n: number)
・ Storage location: Folder the source file is saved to (Still images on the microSD card
are saved to the “i-mode” folder.)
・Acquired source: The same as the source file
Frame
Use Mo to position the charactersand press Oo(
Oo(
You can reselect a position by pressing l(
).
Data Management
○: Editing picture is enabled.
—: Editing picture is disabled.
※1 You cannot edit the still image smaller than 24 x 24 dots.
※2 You cannot edit the still image of Chat Picture (80 x 80) size or smaller.
You can edit the still images of 1440 x 1920 dots, 1224 x 1632 dots, 1212 x 1616 dots,
900 x 1600 dots, and 288 x 352 dots as well.
You can add the marker stamp in the “Stamp” folder.
Select a marker stamp.
You can rotate the marker stamp by pressing i(
) and
selecting “90° to right/90° to left/180°”. Select “Scale up/Scale
down” to enlarge or shrink the marker stamp.
You can reselect a marker stamp by pressing l(
).
351
Fit in screen
Change size
You can convert the image size into the Stand-by (480 x 854)
size.
YES
Select an image size to change to.
If you select the size different in proportional ratio from the
source still image, the still image is enlarged or shrunk so that it
does not exceed the selected size with its proportional ratio
retained.
Oo(
You can reselect a size by pressing l(
Data Management
Trim away
You can trim the still image to a certain size.
Select an image size to trim to.
You cannot select a trimming frame larger than the still image
you are editing.
When you select “Dial/recv. PIC (480 x 288)” or “VGA (480 x
640)”, the still image you are editing and the trimming frame are
halved at both lengthwise and sidewise to be displayed.
).
Oo(
You can reselect a part to be trimmed by pressing
l(
).
You can set texture and color tone of the still image.
Select an item.
Sharp . . . . . . . . . . . . . . . . Stresses the outline.
Blur . . . . . . . . . . . . . . . . . . Softens the outline.
Sepia. . . . . . . . . . . . . . . . . Makes the color tone sepia.
Emboss . . . . . . . . . . . . . . Makes the still image rugged.
Negative. . . . . . . . . . . . . . Reverses the color tone.
Horizontal flip . . . . . . . . . Flips the image horizontally.
Super clear shadow . . . . Makes the dark still image clear.
Memory color . . . . . . . . . Corrects the color and contrast.
Oo(
You can reselect an effect by pressing l(
352
90° to right, 90° to left or 180°Oo(
You can reselect the rotation angle by pressing l(
Brightness
You can adjust the brightness to -3 (dark) through +3 (bright).
Select a brightness level.
Attach to mail
See page 348.
Save
See page 350.
).
Information
).
Use Mo to select a part to be trimmed and press
Oo(
).
You can reselect a size to trim by pressing l(
Retouch
Rotate
You cannot select the marker stamp with following sizes:
・When the size is larger than the still image to be edited
・CIF (352 x 288)
・VGA (480 x 640)
・QVGA (240 x 320)
・QCIF (144 x 176)
・Sub-QCIF (96 x 128)
You cannot enlarge a marker stamp to the size larger than the still image you are
editing.
You cannot set some character colors depending on the image to be edited. In that
case, select another color.
Creating Animations
You can select up to 20 JPEG files (20 frames) of Stand-by (480 x 854)
size or smaller from the “i-mode” folder, “Camera” folder and user
folders, and play them back as animations. You can store 20 original
animations.
mData boxMy picture
Original animation
To change, select an original animation you have set.
Original Animation list
Select a frame position from <1st> to <20th>
Select a folderSelect a still image.
To release the stored still image, select “Release this”.
).
3
Repeat step 2l(
Playing Movies/i-motion
Function Menu of the Original Animation List
Edit title
Enter a title.
You can enter up to 9 full-pitch/18 half-pitch characters.
Org. animation
Go to step 2 on page 352.
Display picture
You can play back the original animation.
Set display
See page 347.
Picture info
See page 347.
Release animation YES
Function Menu while Playing Back Original Animation
See page 347.
Display size
See page 350.
Retry
You can play back the original animation again.
Information
If you delete a still image stored in an original animation, the original animation which
contains the still image is released.
.You can enjoy playing back programs in stereo sound by connecting the Flat-plug
Stereo Earphone Set (option). Also, you can enjoy playing back programs wirelessly by
using a commercial Bluetooth device. (See page 427)
mData boximotionSelect a folder
Select a file.
Each time you press m
from the Folder list, you can
switch between the folders
in the FOMA terminal and
the microSD card.
See page 382 for the
Function menu of the
Folder list.
See page 205 when you
select “Search by i-mode”.
Folder list
Movie list
The following images are displayed when you cannot display the preview images:
Cannot be
played back
No preview
images
Playback restrictions have
expired, and the like.
Incomplete
download
When you select a folder or i-motion movie from another function, some folders or
i-motion movies may not be displayed depending on the function. You may be
able to confirm the i-motion movie by pressing l(
) while selecting an
i-motion movie.
Depending on the i-motion movie, you can play back by selecting a chapter set
for the i-motion movie. (See page 356)
353
Data Management
Set display
You can play back the movies saved to the FOMA terminal or microSD
card.
In Horizontal Open Style, movies are played back horizontally. You can
switch styles during playback.
■Operations when playing back movie
See page 356 for when you operate from the Function menu.
Operation
Key operation
l(
Quick View
Mute/Release mute
Pause※1
Oo(
) (See page 356)
Data Management
Oo(
) to play back
Play back frame by
frame※2
l(
) during pause
Each time of pressing proceeds frame by frame.
Sound volume
adjustment
Bo or
Display next file or
chapter※3
Vo
※1 You cannot operate this for a streaming type of i-motion movie.
※2 You cannot operate this for a streaming type of i-motion movie, or when you are
playing back an i-motion movie while obtaining it. Further, you might not be able to
operate this depending on the i-motion movie.
※3 Movies having no chapters are switched in the order on the Movie list. This
operation is available when you play back from the Movie list. Movies having
chapters are switched in the order that the chapters are stored.
※4 Even if you set the icons not to be displayed, the icon such as “ ”, “ ”, “ ” or “ ”
appears during communication or when an i-mode mail message or Message R/F
comes in.
■Specifications for movie playback
File format
Coding system
Display previous file or o
chapter※3
When playback time is over three seconds, you go back to
the beginning of the file. (You go back to the top of the
chapter for the file with chapters.)
Pixels
Search (fast
Press and hold Co.
Change vertical disp./
c(
horizontal disp./full disp. Each time of pressing switches display formats.
[Normal Style only]
Icon
[Horizontal Open Style
only]
c(
)※4
Each time of pressing switches in order of “Display icons
and navigations” → “Nondisplay icons and navigations” →
“Full display”.
Remaster
Each time of pressing switches between “ON” and “OFF”.
Listening
Each time of pressing switches in order of “OFF”
→ “Surround” → “Natur1” → “Natur2”.
Equalizer
Each time of pressing switches in order of “Normal”
→ “H.BASS1” → “H.BASS2” → “Train”.
354
MP4 file
Video: MPEG4, H.263, H.264
Audio: AMR, AAC, AAC+ (HE-AAC), Enhanced aacPlus
ASF file
Video: MPEG4
Audio: G.726
MPEG4: Files of VGA (640 x 480) size or smaller
H.263: Files of only Sub-QCIF (128 x 96) and QCIF (176 x 144) size
H.264: Files of QVGA (320 x 240) size or smaller
Search (fast forward)※2 Press and hold Vo.
rewind)※2
MP4, ASF
Extension
sdv, 3gp, mp4, asf
Even when the file format is supported, you might not be able to play back some files.
When you select “Position memory” from the Folder list for
movies
The display for selecting Position Memory appears. When you select “Marker to resume”
or “Position memory 1/2”, the movie is played back from the stored position.
Marker to resume
This is stored automatically when a call comes in, an alarm
operates, or the battery level goes flat during playback of a
movie.
Position memory
You can store in any optional position in a movie, and create up
to two position memories. (See page 356)
To delete “Position memory”, press i(
) and select “Delete”. You cannot
delete the “Marker to resume”.
When the movie with a position memory has been deleted or moved to another folder,
you cannot play it back.
Information
While searching (fast forward or fast rewind) a movie or playing it back frame by
frame, it does not sound. You can search (fast forward or fast rewind) while pausing or
playing back the movie (including slow and quick view).
If you receive mail or a Message R/F when playing back an i-motion movie, the video
or sound might be interrupted.
Function Menu of the Movie List
Edit imotion
See page 358.
Edit title
See page 347.
Set imotion
Ring tone
You can set a movie for the Stand-by display.
YESl(
Stand-by disp. Wide You can set a movie for the (horizontally) Stand-by display.
YESl(
Wake-up display
You can set a movie for the Wake-up display.
YESl(
imotion info
You can display the i-motion movie title, file name and others.
Attach to mail
You can compose an i-motion mail message with the file
attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Send Ir data
See page 386.
transmission
See page 388.
Copy to microSD
See page 374.
Copy to phone
See page 375.
See page 376.
Move to phone
See page 376.
Copy
See page 348.
Move
See page 348.
Add desktop icon
See page 31.
Edit file name
See page 348.
File restriction
See page 348.
Reset title
You can reset the title to the default.
YES
Delete this
See page 348.
Delete all
See page 348.
Multiple-choice
See page 348.
Memory info
You can display the used memory space (estimate).
Sort
See page 349.
Listing
You can change the displayed contents for Movie list. You can
select whether the title or file name is displayed in the
microSD Card list.
Select a display format.
Title . . . . . . . . . . . . .The titles or file names are listed.
Title + Image . . . . . .The title or file name, and image are
displayed at a time. The displayed image
is the first frame of movie.
Title/File name . . . .You can select whether to display the
title or file name.
In the case of the microSD Card list, “Title” is displayed as
“Name”, and “Title + Image” is displayed as “Name +
Image”.
You can switch the lists also by pressing c(
) from
the Movie list.
355
Data Management
Stand-by display
You can set a movie for a ring tone.
Select an incoming typel(
The set item is indicated by “★”.
Move to microSD
Position to play
Information
Data Management
When you set an i-motion other than VGA (640 x 480) size to Stand-by display, the
i-motion is enlarged or reduced to VGA (640 x 480) size.
You cannot set the i-motion movie whose acquired source is “
” as a ring tone.
See “imotion info” to check whether the i-motion movie can be set for a ring tone or
receiving display.
When the file size is larger than 2 Mbytes, the confirmation display appears asking
whether to cut it out to the mail size. Select “YES” to cut out the i-motion movie from
the beginning to the about 2-Mbyte point.
You may not be able to compose i-mode mail depending on the i-motion movie.
Depending on the i-motion movie, its file size may become larger or smaller.
You cannot attach an i-motion movie in excess of 2 Mbytes to mail from the Edit
imotion display. See “Trim for mail” for how to cut out the i-motion movie for
attaching to i-motion mail.
press Oo(
The movie is played back at the normal speed.
Chapter list
You can display the list of chapters stored in the movie and
select a chapter to be played back.
Select a chapter to be played back.
Slow
The movie is played back mute at half the normal speed.
To cancel Slow playback, press l(
) or perform
“Normal play”.
Quick View (1.25x)
The movie is played back at the speed 1.25 times the normal
speed.
Press l(
) to play back the movie at twice the
normal speed. Press l(
) to play back at the
normal speed.
Quick View (2x)
The movie is played back at twice the normal speed.
To cancel Quick View, press l(
) or perform
“Normal play”.
Stop
You can end playback.
356
).
To cancel, press r.
Sound effect
Remaster
You can bring the sound from an earphone or Bluetooth
device to the original sound by complementing high-pitch
range lost at data compression.
ON or OFF
Listening
You can set sound effect for listening from an earphone or
Bluetooth device..
Select an item.
Surround . . . Makes the sound natural and stereophonic.
Natur 1/2 . . . . Complements the cooped-up feeling specific
to earphones and plays back natural sound.
Select 1 or 2 according to your taste.
OFF . . . . . . . . Sets Listening to “OFF”.
Equalizer
You can change the quality of the sound from an earphone or
Bluetooth device.
Select an item.
Normal . . . . . Reproduces normal sound quality.
H.BASS1 . . . . Enhances bass sound.
H.BASS2 . . . . Enhances bass sound more deeply than
H.BASS1.
Train . . . . . . . Minimizes abnormal sound that causes sound
leakage.
Function Menu during Pause/at the End of Playback
Normal play
You can set the start point for playing back the movie.
Use o
to move the cursor position of the time bar and
Position memory
You can store a position memory in the movie. Store it at the
desired position in pause state.
Position memory1 or Position memory2
Edit imotion
See page 358.
Attach to mail
See page 355.
You can compose an i-mode mail message also by pressing
l(
) from the playback end display.
Set imotion
See page 355.
imotion info
See page 355.
Send Ir data
transmission
See page 386.
See page 388.
Copy to phone
See page 375.
Add desktop icon
See page 31.
Display size
You can set the display whether to display a movie in the
original size (Actual size) or to fit to the display size.
Actual size or Fit in display
Even if you set to “Actual size”, the movie in excess of the
display size is reduced to the display size. Also, when the
movie is QCIF (176 x 144) size or smaller, it is doubled at
both lengthwise and sidewise to be displayed.
Change to full
You can switch display formats of movies. Each time of
selecting the item switches displays in order of playback on
the vertical display → playback on the horizontal display fitted
to the display size → playback on the enlarged full display.
Using Playlist
You can store movies in a playlist, and continuously play them back in
the order you like. You can create up to 5 playlists, and can store up to 30
movies per playlist.
Store Playlist
mData boximotionPlaylist
Select Playlist 1 through 5.
Playlist list
Select <1st> through <30th>Select a folder
Select a movie.
Repeat step 2l(
To release a stored movie, press i(
) and select “DEL one from list”.
Select “DEL all from list”, then you can release all the stored movies.
To change the order of stored movies, press i(
) and select “Order to
play”, and select a movie whose position to be changed. Then, select the
destination position to change the order.
Information
You cannot store partially saved i-motion movies in the playlist.
357
Data Management
Information
When restrictions on chapter forward/rewind are applied, you cannot select chapters
after/before the one you are currently playing back.
You cannot slow-play the following i-motion movies:
・A streaming type of i-motion movie
・An i-motion movie being played back while obtaining data
・An i-motion movie played back from the Stand-by display
You cannot execute Quick View for some i-motion movies.
It may be hard to hear sound during Quick View.
Depending on the movie/i-motion movie, you might not be able to select the position
to play.
Even if an earphone or Bluetooth device is not connected, the respective setting
contents are shown on the display.
When audio format of the i-motion movie is AMR or G.726, sound effect might be
unavailable.
Information
Depending on the movie/i-motion movie, you might not be able to store the position
memory.
Depending on the image size, the image might be displayed with the right or bottom
side cut off.
The movie of QCIF (176 x 144) size or smaller is not played back in full display.
Depending on the image size, the image might be displayed with the right or bottom
side cut off.
Play Back Playlist
Playlist listHighlight a playlist and press l(
).
Function Menu of the Playlist List
i(
)Edit the movie/i-motion movie.
See page 359 for the operation.
Press Oo(
).
Not to save the edited movie/i-motion movie, press r or h; then select
“YES”.
YES
Play
See page 358.
Edit playlist
You can edit the playlist.
Go to step 2 on page 357.
■Operations during editing an i-motion movie or demo playback
Release playlist
You can release all movies stored in the playlist.
YES
Pause
Oo(
Press Oo(
Fast forward
Press and hold Vo.
Edit playlist name
Data Management
You can edit the name of the playlist.
Edit a playlist name.
You can enter up to 10 full-pitch/20 half-pitch characters.
See page 205 when i-motion movies are stored to the maximum.
Operation
Key operation
Fast rewind
Press and hold Co.
Forward frame by frame
Vo during pause
Editing Movies/i-motion
Rewind frame by frame
Co during pause
You can edit movies/i-motion movies. The edited movies/i-motion movies
are saved to the folder containing the source movies/i-motion movies.
Movie list/During pause/At the end of
playbacki(
Edit imotion
Sound volume adjustment Bo or
You cannot do some operations depending on the state.
Information
Use Bo or to adjust the sound volume.
Edit imotion display
358
) to play back.
You cannot edit the following movies/i-motion movies:
・The files with “File restriction” and “Replay restriction” obtained from sites or i-mode
mail
・The files other than VGA (640 x 480), HVGA Wide (640 x 352), QVGA (320 x 240),
QCIF (176 x 144) and Sub-QCIF (128 x 96) size
・The files saved to the microSD card
You might not be able to edit some i-motion movies.
The image quality may deteriorate or the file size may become larger or smaller by
executing “Edit imotion”.
When a call comes in, the battery level goes flat, or you close the FOMA terminal
while editing, the confirmation display appears asking whether to save the fixed edited
contents.
Function Menu of the Edit imotion Display
Trim imotion
File restriction
You can cut out a certain range from an i-motion movie.
Use Vo to display a start frame and press l(
).
The start frame is set and the movie/i-motion movie is played
back.
Use Vo to display an end frame and press l(
).
The cut out range is played back.
When the file size reaches about 10 Mbytes, the end frame is
automatically set.
Normal play
You can play back at the normal speed.
Slow
You can play back mute at half the normal speed.
Press Oo(
Quick View (2x)
You can play back at twice the normal speed.
Press l(
) to play back a demo to check the edited
movie/i-motion movie.
Starting point
You can set the start frame for “Trim imotion” and “Trim for
mail”.
You can cut out the still image and save it.
Use Vo to display a frame and press l(
)YES
Select a folder.
See page 205 when images are stored to the maximum.
Ending point
You can set the end frame for “Trim imotion”.
Determine
You can set the frame for “Trim for picture”.
Stop
You can stop playing back.
).
Quick View (1.25x) You can play back at the speed 1.25 times the normal speed.
Data Management
Trim for mail
If you execute “Trim imotion”, the file size may become larger.
Function Menu while i-motion is Edited or Demo Playback
is in Pause
Press Oo(
) at the position you want to cut out.
Playing back the movie/i-motion movie pauses.
Trim for picture
See page 348.
Information
You can cut out the movie/i-motion movie to the size attachable to
i-mode mail.
Mail size (S) or Mail size
Mail size (S) . . . Cut out to the size of about 500 Kbytes or less.
Mail size . . . . . . Cut out to the size of about 2,048 Kbytes or
less.
Use Vo to display a start frame and press l(
The movie/i-motion movie is played back.
When the file size reaches about 500 Kbytes, about 2,048
Kbytes, or at the end of playback, the playback stops
automatically.
).
Oo(
Press l(
) to play back a demo and you can check the
edited movie/i-motion movie.
Attach to mail
See page 355.
359
Operation
Playing Video
You can play back the video saved to the microSD card. Just by
changing the style during playback, the vertical display and horizontal
display switch automatically. In Normal Style, you can switch displays
manually by pressing c.
You can enjoy playing back programs in stereo sound by connecting the Flat-plug
Stereo Earphone Set (option). Also, you can enjoy playing back programs wirelessly by
using a commercial Bluetooth device. (See page 427)
Data Management
mData box1SegVideoSelect a file.
Cannot be
played back
360
Oo(
Oo(
Play back frame by
frame※1
No preview image
Fast forward※1
) or p to play back
l(
) during pause
Each time of pressing proceeds frame by frame.
Vo
Oo(
) or p to resume
Co
) or p to resume
Skip (fast forward)※1※2
Vo(for at least one second) or s during playback or pause
Skip (rewind)※1※3
Co(for at least one second) or a during playback or pause
Program title※4
Icons and the time bar appear on the horizontal display.
Switch display
d while displaying program title
Each time of pressing from the horizontal display
switches ON/OFF of “Icon” and “Caption”.
Each time of pressing from the horizontal display
switches the positions of the time bar as well regardless
of whether the caption is displayed or not.
Switch display directions/ c※5※6
Full display
In Video Mode, each time of pressing switches the
display directions.
In Data Broadcasting Mode, each time of pressing
switches between standard display and full display.
Switch TV/data BC
Key operation
Each time pressing switches in order of “1.25x” → “2x”
→ “Summary View” → ”Normal play”.
) or p
Sound volume adjustment Bo※1 or \
Video list
■Operations when playing video
See page 362 for when you operate from the Function menu.
Operation
Pause※1
Oo(
Folder list
The image on the right is displayed when
you cannot display a preview image:
Quick View※1
Rewind※1
When the position to play is
recorded to the video, the
playback starts from the
position to play. Press
l(
) to play back
from the beginning.
When you select a divided
recorded video from Video
list, select the video to play
back from list of divided
recorded videos.
Key operation
Mute/Release mute
※1
※2
※3
※4
m(
)※7
Each time of pressing switches between Video Mode
and Data Broadcasting Mode.
In Data Broadcasting Mode, you cannot operate.
You cannot operate for a file whose playback time is shorter than 30 seconds.
You cannot operate for a file whose playback time is shorter than 10 seconds.
When you operate immediately after “Skip”, “Fast forward”, “Rewind”, or “Position to
play”, the program title stored in “Video info” might appear.
※5 Close the FOMA terminal to return to the vertical display. In Horizontal Open Style,
the horizontal display automatically appears in Video Mode and the vertical display
does not appear.
※6 You cannot operate this in Horizontal Open Style.
※7 You can operate in the same way as “Program title” while horizontal display is shown.
When you select “Position memory” from the Folder list for
videos
The display for selecting Position Memory appears. When you select “Marker to resume”
or “Position memory 1/2”, the video is played back from the stored position.
Marker to resume
This is stored automatically when a call comes in, an alarm
operates, or the battery level goes flat during playback of a video.
Position memory
You can store in any optional position in a video, and create up to
two position memories. (See page 362)
Information
No sound is output during frame-by-frame playback or during skipping. Further,
captions are not displayed.
The displayed time bar is for reference.
Even if you set “Sound effect setting” (or “Sound effect”) to “ON”, effect tones do not
sound during pause, frame-by-frame playback, slow playback, or quick view playback.
When you select “YES (default)” from the confirmation display for data broadcasting
while watching a 1Seg program or playing back video, the information on data
broadcasting might be automatically updated, and you might be charged a packet
communication fee. (See page 269)
You might not be able to operate links by selecting them on data broadcasting during
pause or at the end of playback.
The part of video that was not correctly recorded owing to the bad radio wave
conditions is not displayed and skipped to the position where it can be displayed
correctly. In that case, the video might not be played back for a few seconds, or might
be distorted. Further, the time bar might not be displayed correctly.
If you try to play back a video with a low battery, the battery alert tone sounds, and the
confirmation display appears asking whether to play it back. When the battery
becomes low during playback, the playback pauses, the battery alert tone sounds,
and the confirmation display appears asking whether to end the playback. The battery
alert tone sounds regardless of the setting of “Keypad sound”.
Function Menu of the Video List
Edit title
Enter a title.
You can enter up to 18 full-pitch/36 half-pitch characters.
Video info
You can display the channel name, the program name, etc. of
the video.
You can display the channel name, the program name, etc.
also by pressing c(
).
Add desktop icon
See page 31.
Reset title
You can reset the title to the default.
YES
Data Management
To delete “Position memory”, press i(
) and select “Delete”. You cannot
delete the “Marker to resume”.
When the video with a position memory has been deleted, you cannot play it back.
Information
If you edit (divide) the video using a mobile phone or personal computer that supports
the edit function, you might not be able to correctly play it back on the FOMA terminal.
The FOMA terminal is not support a viedo that it is protected on other devices.
Delete
Delete this
YES
Delete selected
You can select multiple videos and delete them.
Put a check mark for videos to be deleted
l(
)YES
Delete all
Enter your Terminal Security CodeYES
Memory info
You can display the used memory space (estimate).
Listing
You can change the displayed contents for Video list.
Select a display format.
Title . . . . . . . . . . . . The title names are displayed.
Title + image . . . . . The title name and image are displayed at
a time. The displayed image is the first
frame of video.
361
Information
If a call comes in while deleting multiple videos, deleting is canceled.
The video whose recording time is long might take a long time to be deleted. Make
sure that the remaining battery is full enough.
You might not be able to delete the video containing data that does not support the
FOMA terminal.
The video that was not recorded correctly owing to the bad radio wave conditions
might not be played back.
Data Management
Function Menu during Pause/at the End of Playback
Normal play
The video is played at the normal speed.
Slow
The video is played back mute at half the normal speed.
To cancel Slow play, perform “Normal play”.
Quick View
The video is played back quickly.
Select an item.
1.25x . . . . . . . . . . .The video is played back at the speed
1.25 times the normal speed.
2x . . . . . . . . . . . . . .The video is played back at twice the
normal speed.
Summary View. . .The played back speed is
automatically adjusting according to
the voice of the video.
To cancel Quick view, press l several times, or
perform “Normal play”.
Fast forward
Rewind
Stop
362
The video is played back fast.
10x or 30x
To cancel fast forward playback, press Oo(
).
The video is played back fast in the opposite direction.
10x or 30x
To cancel rewind playback, press Oo(
).
You can end playback.
Position to play
You can set the start point for playing the video.
Use No to move the cursor position of the time bar
and press Oo(
).
To cancel, press r.
Position memory
You can store a position memory in the video. Store it at
the desired position in pause state.
Position memory1 or Position memory2
Video info
See page 361.
Add desktop icon
See page 31.
Switch display
You can switch the contents on the viewer display.
Select an item.
If you set to “Enlarged V. img+DBC”, the video on the
vertical display is enlarged. However, the sides of the
video might be cut depending on the program.
If you operate “Fast forward” or “Rewind” from the
Function menu while “Data broadcasting” is set, the
setting at Video Player start-up returns.
Even if you set to “Data broadcasting”, the audio from
video files is output.
You can set “Caption” from “User Settings” or while
watching a 1Seg program.
At player start-up
When “Caption” is set
to “ON”:
V. img+Caption+DBC
When “Caption” is set
to “OFF”:
Visual image+DBC
Switch TV/data BC
At player start-up
Video Mode
You can switch between Video Mode and Data
Broadcasting Mode while watching a video on the vertical
display.
Icon
See page 268.
Image quality
See page 268.
Sound
Sound effect
Auto volume
See page 268.
Remaster
See page 268.
Listening
See page 269.
Equalizer
See page 269.
Main/sub sound
Main sound, Sub sound, or Main+sub sound
At player start-up
Main sound
Displaying/Operating Chara-den Images
You can display stored Chara-den images.
You can make the Chara-den image move by key operation.
Data broadcasting
Reload contents
You can reload the displayed data broadcasting site.
The confirmation display appears asking whether to
re-send the data you entered, depending on the site.
Certificate
See page 197.
Set image display
See page 208.
Sound effect
See page 269.
Reset settings
Back to data BC
mData boxChara-denSelect a Chara-den image.
See page 269.
You can stop browsing the data broadcasting site and
return to the data broadcasting.
You cannot execute Quick View for some video files.
It may be hard to hear sound during Quick View.
Depending on the video file, you might not be able to select the position to play.
When you have selected the part that was not recorded correctly owing to bad radio
wave conditions, the start point moves to the part where you can play back the video
correctly.
Chara-den
Chara-den is an animation character representing yourself. You can send
it as your image during videophone calls.
You can use the Chara-den player to play it back and shoot it.
You can delete the pre-installed Chara-den image. You can re-download it from the
“P-SQUARE” site (see page 206). When you use a UIM other than the one used for
downloading, the UIM security function (see page 39) is set for it.
Some Chara-den images synchronize their movement with your voice spoken into the
microphone.
Chara-den list
Chara-den display
■Key assignment of operating Chara-den
You can use the Action list to check the actions that you can operate.
The number of actions you can operate varies depending on the Chara-den image.
Key operation
Details
1∼9
Whole action: expresses an action with whole of
the body.
s1∼s9※1※2
(Whole Action Mode)
11∼99※1
(Parts Action Mode)
Parts action: expresses an action with a part of
the body.
Suspends the running action.
Displays the Action list.
Makes a videophone call.
Records Chara-den images.
※1 You cannot operate for the pre-installed Chara-den image.
※2 Press s again to cancel the first s.
363
Data Management
Information
Data Management
Function Menu of the Chara-den List
Function Menu of the Chara-den Display
Chara-den call
See page 73.
Chara-den call
See page 73.
Substitute image
See page 74.
Substitute image
See page 74.
Rec. Chara-den
See page 364.
Rec. Chara-den
See page 364.
Edit title
Enter a title.
You can enter up to 18 full-pitch/36 half-pitch characters.
Add desktop icon
See page 31.
Action list
You can display the list for actions that you can operate.
Highlight an action, and press Oo(
) to run the action;
and press l(
) to check the details of the action.
You can display the Action list also by pressing m.
Change action
You can switch the action modes between Whole Action Mode
( ) and Parts Action Mode ( ).
Chara-den info
You can display the title, file name, and others of the Chara-den
image.
Memory info
You can display the used memory space (estimate).
Add desktop icon
See page 31.
Delete
YES
Delete all
Enter your Terminal Security CodeYES
This operation deletes the pre-installed Chara-den image as
well.
Multiple-choice
You can select and delete multiple Chara-den images.
Put a check mark for Chara-den images to be deleted
i(
)DeleteYES
Display size
Reset title
You can set whether to display the Chara-den image in “Actual
size” or “Fit in display”.
Actual size or Fit in display
You can reset the title to the default one.
YES
Information
“Rec. file restriction” denotes whether to restrict the operation such as attaching still
images/movies created by “Rec. Chara-den” to mail, saving them to microSD card, or
editing them.
If you delete a Chara-den image set for the substitute image except “カンガルー
(kangaroo)”, “カンガルー (kangaroo)” is set for the substitute image. If you delete “カ
ンガルー (kangaroo)”, a pre-installed substitute image will be sent.
364
At Chara-den
display
Whole Action
Mode
Chara-den info
See page 364.
Display size
See page 364.
Recording Chara-den Images
You can shoot the displayed Chara-den image as a still image or movie.
mData boxChara-den
Select a Chara-den image to be shot
c(
You can select “Rec. Chara-den” also from the Function
menu of the Chara-den list or Chara-den display for
recording.
Chara-den
Recording display
Shoot Still Images
Display “
” on the Chara-den Recording display and
press Oo(
).
A still image of the displayed Chara-den image is shot.
While “
” is displayed, press c(
) to display “
Press Oo(
You can set the image size for recording and saving a still
Chara-den image. You can set only in Photo Mode.
QCIF (176 x 144) or Small (117 x 96)
Recording type
You can set whether to record video or voice for recording and
saving a moving Chara-den image. You can set only in Movie
Mode.
Video + voice or Video
Recording quality
You can set the image quality for saving a moving Chara-den
image. You can set only in Movie Mode.
Normal, Prefer image quality, or Prefer motion speed
”.
).
The still image you have shot is saved to the “Camera” folder.
Record Movies
Display “
” on the Chara-den Recording display and
pressOo(
).
Oo(
)Oo(
”.
The recorded movie is saved to the “Camera” folder.
Displaying Machi-chara Images
mData boxMachi-chara
Select a Machi-chara image.
Data Management
Recording of the displayed Chara-den image starts.
While “
” is displayed, press c(
) to display “
Recording size
Each time you press m from the Machi-chara list, you
can switch between the list in the FOMA terminal and
the microSD card.
Information
The image size is fixed to QCIF (176 x 144).
In Manner Mode or when “Phone” or “Mail” of “Ring volume” is set to “Silent”, the
recording confirmation tone, the recording start tone, and the recording end tone do
not sound.
When “Recording type” is set to “Video + voice”, the voice is recorded as well.
Function Menu of the Chara-den Recording Display
Switch Chara-den
Select a Chara-den image to be displayed.
If you switch Chara-den images, the action mode switches to
Whole Action Mode.
Substitute image
See page 74.
Action list
See page 364.
Change action
See page 364.
Display size
See page 364.
© 2007-2008 LEVEL-5 Inc.
Machi-chara list
The image on the right is displayed when
you cannot display a preview image.
No preview image
Incomplete
download
See page 205 when you select “Search by i-mode”.
365
Edit title
See page 347.
Preview
You can display Machi-chara image.
Data Management
Set to Machi-chara You can set Machi-chara image. (See page 119)
You can set Machi-chara image also by pressing l(
You cannot set Machi-chara image on the microSD card.
Playing a Melody
).
RLS Machi-chara
You can release a Machi-chara image setting.
Machi-chara info
You can display the title, file name, and others of the Machi-chara
images.
Reset all info
You can reset data included in the Machi-chara image.
YES
Move to microSD
See page 376.
Move to phone
See page 376.
Move
See page 348.
Reset title
You can reset the title to the default.
YES
Delete this
See page 348.
Delete all
Enter your Terminal Security CodeYES
This operation deletes pre-installed Machi-chara images as
well.
Multiple-choice
See page 348.
Memory info
You can display the used memory space (estimate)/number of
stored items.
Sort
See page 349.
Listing
You can change the displayed contents for the Machi-chara list.
Title or Image
You can switch the lists also by pressing c(
) from the
Machi-chara list.
366
+m-1-6
Function Menu of the Machi-chara List
mData boxMelody
Select a folderSelect a melody.
Each time you press m from the Folder list, you can
switch between the folders in the FOMA terminal and
the microSD card.
See page 382 for the Function menu of the Folder list.
When selecting folders and
melodies by another
function, some folders or
melodies may not be
displayed depending on the
function. Some melodies
may be played back for
confirmation while being
selected, or you may at
times be able to play back
the melody by pressing
l(
).
See page 205 when you
select “Search by i-mode”.
Melody list
Folder list
Melody Playback
Play Back Playlist
You can repeatedly play back the melodies selected by “Edit playlist”.
mData boxMelodyPlaylist
■Operation while playing back a melody
File restriction
You can set the file restrictions on the selected melody.
File unrestricted or File restricted
See page 247 for the file restrictions.
m, c, p
Add desktop icon
See page 31.
Sound volume
adjustment
Bo or ※2
Attach to mail
Replay next file※3
Vo
You can compose an i-mode mail message with the selected
melody attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Replay previous file※3
Co
Send Ir data
See page 386.
Operation
Halt
Key operation
Oo(
), d, 0 through 9, a, s, l※1,
※1 Halts the playback of melodies which cannot be attached to mail.
※2 Halts the playback when the FOMA terminal is closed.
※3 Valid when played back from the Melody list.
Information
Function Menu of the Melody List
Edit title
Edit the title.
For a file in the FOMA terminal, you can enter up to 31
full-pitch/63 half-pitch characters.
For a file on the microSD card, you can enter up to 18
full-pitch/36 half-pitch characters.
Edit file name
Edit the file name.
You can enter up to 36 half-pitch alphanumeric characters
and symbols (only “.”,“-”,“_”) except extension.
Play melody
See page 366.
Set as ring tone
Select an incoming type.
“★” indicates the set item.
See page 388.
Copy to microSD
See page 374.
Melody info
You can display the melody title, file name and others.
Copy to phone
See page 375.
Move to phone
See page 376.
Copy
You can copy the melody from a folder on the microSD card to
another folder on the microSD card.
Select a destination folder.
Memory info
You can display the used memory space (estimate).
Reset title
You can reset the title to the default.
YES
Delete
Delete this
You can delete the melody stored in the FOMA terminal.
YES
Delete selected
You can select and delete multiple melodies stored in the
FOMA terminal.
Put a check mark for melodies to be deleted
l(
)YES
Delete all
You can delete all melodies stored in the selected folder in the
FOMA terminal.
Enter your Terminal Security CodeYES
Delete this
You can delete the melody stored on the microSD card.
YES
367
Data Management
The melodies are played back at the volume set for “Phone” of “Ring volume”. When
“Phone” of “Ring volume” is set to “Silent” or “Step”, they are played back at “Level 2”.
However, the melody played back when it is selected does not sound.
Even if you change the volume while playing back, the volume set for “Phone” of
“Ring volume” returns when you exit the Melody player.
transmission
Delete all
Information
Multiple-choice
You can select multiple melodies stored on the microSD card
and operate them.
Put a check mark for the melodies to be operated
i(
)Select an item.
Delete . . . . . . . See “Delete this” on page 367.
Copy . . . . . . . . See page 367.
Move . . . . . . . . See page 368.
Select all. . . . . You can select all melodies.
Release all . . . You can release all selected melodies.
You cannot attach the melody with “
” or “
” whose acquired source icon is
“
” or “
” , or the melody in excess of 100 Kbytes.
You may not be able to attach to i-mode mail even when the file restriction in the
melody information is “File unrestricted”.
When a melody set for another function is deleted, the setting returns to the default.
(When the melody is set for an alarm tone of “Schedule”, “ToDo”, or “TV timer”, or for
“Alarm”, it switches to “Clock Alarm Tone”.)
You cannot delete the pre-installed melody.
Sort
You can change displayed order.
Select an order.
You cannot sort the files on the microSD card.
Attach to mail
See page 367.
Set as ring tone
See page 367.
Melody info
See page 367.
Copy to microSD
See page 374.
Copy to phone
See page 375.
Add desktop icon
See page 31.
Play all/
Play portion
You can temporarily switch the play start positions of the melody.
Move
Data Management
You can delete all melodies stored in the selected folder on
the microSD card.
Enter your Terminal Security CodeYES
You can move the melody to another folder.
Select a destination folder
Put a check mark for melodies to be moved
l(
)YES
Press l(
) to display folders at the second-tier level
or lower, if they exist. Press r to return to the upper level.
For the microSD card, you do not need to put a check mark
for the melodies.
Move to microSD
See page 376.
Information
When the icon of the acquired source is “
” or “
” and the icon such as “
” or
“
” is displayed for that melody, you cannot change the file name.
You cannot use some characters and symbols for a file name.
You can set the file restrictions only to the melody with the acquired source icon “
”.
When the melody file exceeds 100 Kbytes by applying the restriction, you cannot set
the file restrictions.
368
Function Menu of the Melody Playback Display
Function Menu of the Kisekae Tool list
Checking Kisekae Tool
You can check the details on Kisekae Tool files.
You can delete the pre-installed Kisekae Tool file. You can re-download it from the
“P-SQUARE” site (see page 206). When you use a UIM other than the one used for
downloading, the UIM security function (see page 39) is set for it.
See page 347.
Preview
You can display the Detailed Kisekae Tool display.
Set at one time
You can set the Kisekae Tool file at one time. (See page 118)
You can set the Kisekae Tool file at one time also by pressing
l(
).
You cannot set Kisekae Tool files on the microSD card at a
time.
Kisekae Tool info
You can display the title, file name, and others of the Kisekae
Tool file.
Move to microSD
See page 376.
Move to phone
See page 376.
Reset title
You can reset the title to the default.
YES
Move
See page 348.
Delete this
See page 348.
Delete all
You can delete all files in the folder.
Enter your Terminal Security CodeYES
Multiple-choice
See page 348.
Memory info
You can display the used memory space (estimate)/number of
stored items.
Sort
See page 349.
Listing
You can change the displayed contents for the Kisekae Tool list.
Title or Image
You can switch the lists also by pressing c(
) from the
Kisekae Tool list.
mData boxKisekae Tool
Select a Kisekae Tool fileSelect an item.
© 2007-2008 LEVEL-5 Inc.
Kisekae Tool list
Detailed Kisekae
Tool display
Selected image, ring tone or illumination are played back as a demo. If you select a
color theme, the display is displayed in selected color theme.
Each time you press m from the Kisekae Tool list, you can switch between the
list in the FOMA terminal and the microSD card. In the Folder list on the microSD
card, you can display the Kisekae Tool list by selecting a folder.
See page 382 for the Function menu of the Folder list.
The image on the right is displayed when you cannot display a
preview image.
See page 205 when you select “Search by i-mode”.
Information
Clock display cannot be played back as a demo.
369
Data Management
Edit title
microSD Card
Data Management
You need to obtain a microSD card separately to use the functions
related to the microSD card.
The microSD card is available at electronics retail stores, etc.
P-01A supports a commercial microSD card of up to 2 Gbytes and microSDHC card of
up to 16 Gbytes (As of October 2008).
For the latest operation check information such as the memory capacity and
manufacturers of microSD cards, access the following sites (in Japanese only). Note
that the microSD cards other than published in the sites might not correctly work.
・From i-mode to P-SQUARE (As of October 2008)
iMenu → メニューリスト (Menu List)
→ ケータイ電話メーカー (Mobile Phone Maker) → P-SQUARE
・From personal computers
http://panasonic.jp/mobile/
Note that the published information is the result obtained from the
QR code for
accessing the site
operation check, which does not necessarily guarantee all
performances of those microSD cards.
During processing of the card, “ ” is displayed. During processing of the card, never
remove the microSD card, or turn off the FOMA terminal. Check that processing of the
card does not go on before turning off the FOMA terminal, and then remove the
microSD card.
When the FOMA terminal or microSD card has many data files, it may take longer to
access the files.
Up to about 65,500 folders and files on the microSD card can be recognized.
The microSD card has an operating life. If you use the microSD card for a long time,
you may not be able to write new data on it, or the card may be disabled.
With the FOMA terminal, you can save the downloaded still images, i-motion movies,
melodies, Kisekae Tool files, Machi-chara images, Chaku-uta Full® music files, and
i-αppli programs with the file restrictions to the microSD card. You cannot save the files
IPs (Information Providers) do not permit.
Information
You may not be able to use the microSD card formatted using a personal computer
and other devices. Be sure to use the microSD card formatted with P-01A.
370
Information
Note that formatting deletes all the contents on the microSD card.
If you read/write data from/on a microSD card using a device other than this FOMA
terminal, the microSD card might become unusable depending on the device or
operations.
When you insert a microSD card which has been used with another device such as a
personal computer into P-01A, new files and folders to be used in P-01A are created.
Inserting/Removing microSD Card
■Inserting
To open the cover of the
microSD card slot, pull out it
in the direction of A and then
turn it in the direction B.
Face the front surface of the
microSD card upwards and
insert the card.
Push it until it clicks.
Close the cover of the
microSD card slot.
■Removing
Open the cover following
step 1 of “■Inserting” and
push the microSD card until it
stops.
Pushing the microSD card inside pops up
the card.
Remove the microSD card.
Displaying Data Items on microSD Card
You can display the Phonebook entries, schedule events, ToDo items,
mail messages, text memos, and bookmarks (i-mode/Full Browser)
stored on the microSD card.
You can operate in the same way on the detailed Phonebook display, detailed mail
display, and detailed Bookmark display as when you display data stored in your FOMA
terminal.
See page 99 for detailed operations of the Phonebook.
See page 173 for detailed operations of mail.
See page 201 for detailed operations of bookmarks.
If you select “Schedule”,
ToDo items are also
displayed.
: The microSD card is write-protected. You cannot save data, and execute “Check
microSD” and “microSD format”.
: You cannot use the microSD card. Remove the microSD card and then insert it
again.
If “ ” is still displayed, execute “Check microSD” or “microSD format”.
Information
Do not insert or remove the microSD card with the FOMA terminal turned on. It may
damage the microSD card or its data.
Note that microSD card may pop out when you insert or remove it.
Check the direction of the microSD card, and then insert or remove it straight. If you
obliquely insert the microSD card into the slot, the microSD card may be damaged.
It may take long to initially read or write data after inserting the microSD card.
mLifeKitmicroSDRefer microSD data
Select a category.
Category list
microSD File display
(For Phonebook)
Select a fileSelect a data item.
Data list
(For Phonebook)
Detailed data display
(For Phonebook)
371
Data Management
■Icons on the display
The following icons appear when you insert the microSD card:
: You can save and read data.
Function Menu of the Category List/microSD File Display/
Data List/Detailed Data Display
Edit title
Enter a title.
You can enter up to 15 full-pitch/31 half-pitch characters.
Add to phone
See page 373.
Data Management
Overwrite to phone See page 374.
Add one to phone
See page 373.
Add all to phone
See page 373.
Overwr. all to ph.
See page 373.
Copy to microSD
See page 372.
Delete this
YES
Delete all
You can delete all files in the currently displayed category.
Enter your Terminal Security CodeYES
microSD info
See page 379.
Property
You can display the detailed data display.
microSD format
See page 378.
Check microSD
See page 378.
Copy Data Items in the FOMA Terminal to the microSD
Card
You can copy the Phonebook entries, schedule events, ToDo items, mail
messages, text memos, and bookmarks stored in the FOMA terminal to
the microSD card.
Copy one to microSD
You can copy a single file from the FOMA terminal onto the microSD
card. A copied data item is saved as a single file.
You cannot copy the secret code stored in a Phonebook entry.
Display for a data item to be copiedi(
Copy to microSDYES
To copy a Phonebook entry, a scheduled event or a mail message, select “Move/
copy” from the Function menu and select “Copy to microSD”.
To copy a bookmark, select “Copy” from the Function menu and select “Copy to
microSD”.
Copy all to microSD
You can copy the data items of the category selected on the Category list
or of the category displayed on the microSD File display from the FOMA
terminal to the microSD card. The copied data items are all saved as a
single file.
You cannot copy secret codes or voice dial entries stored in the
Phonebook entries.
Category list/microSD File displayi(
Copy to microSD
Enter your Terminal Security CodeYES
To copy scheduled events, select “Schedule”, “ToDo”, or “All” (Schedule and
ToDo).
To copy bookmarks, select “i-mode”, “Full Browser”, or “All” (i-mode and Full
Browser).
Information
When you copy a file stored as secret data, the file is copied as an ordinary file.
372
Information
When you copy all files, the files stored as secret data are also copied.
When you copy all the Phonebook entries, the information from the PushTalk
Phonebook entry and the contents of “Own number” are also copied.
For copying mail, some files attached to mail may be deleted depending on file format.
When you copy mail containing links to start an i-αppli program, the information about
starting the i-αppli program in that mail is deleted.
During copying, the FOMA terminal is placed in the same status as it is out of the
service area.
Copy Data Items on the microSD Card to the FOMA
Terminal
You can copy the Phonebook entries, schedule events, ToDo items, mail
messages, text memos, and bookmarks (i-mode/Full Browser) stored on
the microSD card to the FOMA terminal.
See page 381 for the number of data items that can be saved to the microSD card.
Data list/Detailed data displayi(
Add one to phone or Copy to phoneYES
microSD File displayi(
)Add to phone
Enter your Terminal Security CodeYES
or
Data listi(
)Add all to phone
Enter your Terminal Security CodeYES
Overwrite all to phone
You can copy all data items in all files of the category selected on the
Category list or all data items in all files displayed on the microSD File
display to the FOMA terminal.
Note that the data items already stored in the FOMA terminal are
overwritten and deleted.
Category list/microSD File displayi(
Overwr. all to ph.
Enter your Terminal Security CodeYESYES
Add all to phone
You can copy all data items in all files of the category selected on the
Category list or all data items in all files displayed on the microSD File
display to the FOMA terminal.
The copied data items are added to the FOMA terminal.
Category list/microSD File displayi(
Add all to phone
Enter your Terminal Security CodeYES
373
Data Management
Add one to phone
You can copy the data item selected on the data list or displayed on the
detailed data display to the FOMA terminal.
Add to phone
You can copy all data items in a file selected on the microSD File display
or all data items displayed on the data list to the FOMA terminal.
The copied data items are added to the FOMA terminal.
Overwrite to phone
You can copy all data items in a file selected on the microSD File display
or all data items displayed on the data list to the FOMA terminal.
Note that the data items already stored in the FOMA terminal are
overwritten and deleted.
microSD File displayi(
Overwrite to phone
Enter your Terminal Security CodeYESYES
or
Data listi(
)Overwr. all to ph.
Enter your Terminal Security CodeYESYES
Data Management
Information
If the memory capacity of the FOMA terminal runs short during copying, copying is
suspended midway; however, the data already copied is stored.
When you perform “Add one to phone” for a Phonebook entry, any group is not set if
the group number or group name stored in the microSD file differs from that stored on
the FOMA terminal.
When you copy Phonebook entries in which phone numbers are stored, they are also
stored in the PushTalk Phonebook. When you overwrite the Phonebook entries, the
contents of the PushTalk group are also overwritten.
When you execute “Add one to phone”, the confirmation display appears asking
whether to store it. Select “YES” (select a phone number when multiple phone
numbers are stored) to store the entry also to the PushTalk Phonebook.
When you overwrite the Phonebook entries, the voice dial entries are deleted.
When you copy a mail message with the Outbox or Inbox full, the oldest unprotected
mail message is overwritten (the read one for the Inbox).
When you execute “Add all to phone”, you cannot copy the bookmarks of the same
URL.
If the number of files stored on the microSD card increases, it may take long to read or
write data.
During copying, the FOMA terminal is placed in the same status as it is out of the
service area.
374
Copying Still Images, Movies, etc.
Copy Files from the FOMA Terminal to the microSD Card
The destination folder and file name are as follows:
Still image
(DCF standard)
Still image
(Non DCF standard)
Still image
(Deco-mail pictogram)
Movie
(With video)
Movie
(Without video)
Melody
PDF file
Decome-Anime template
The destination folder in the “Picture” folder
PXXXXXXX (X denotes a numeral.)
The destination folder in the “Image Box” folder
STILXXXX (X denotes a numeral.)
The destination folder in the “Decomail-pictograph” folder
DIMGXXXX (X denotes a numeral.)
The destination folder in the “Movie” folder
MOLXXX (X denotes an alpha-numeral.)
The destination folder in the “Other contents” folder
MMFXXXX (X denotes a numeral.)
The destination folder
RINGXXXX (X denotes a numeral.)
The destination folder
The same file name as the one in the FOMA terminal
The destination folder
DEATXXXX (X denotes a numeral.)
When you copy or move a file between the FOMA terminal and the microSD card, its
file format might change.
Still Image list/Still image in play/Movie list/Melody list/
Melody during playback/PDF File list/Decome-Anime
Template listi(
)Copy to microSD
If you have used “Multiple-choice” to select files to be copied, you can copy the
multiple files at a time.
Information
You can copy JPEG, GIF, SWF, MP4, MFi, SMF, PDF files and Decome-Anime
templates in the “i-mode” folder, “Camera” folder, “Decomail-picture” folder,
“Decomail-pictograph” folder and a user folder.
Information
You can copy multiple JPEG, GIF, SWF and MP4 files at a time but not others.
When the files in the destination folder are stored to the maximum, a new folder is
automatically created and files are saved to that folder. For the files other than still
images or Decome-Anime template, the message “Storage is changed to XXXXXXX”
(XXXXXXX denotes a folder name) appears when copying is completed.
You cannot copy the following files:
・Files that you shot Chara-den images whose “Rec. file restriction” is “File restricted”
・Files whose output from the FOMA terminal is prohibited
・Pre-installed Deco-mail pictures
・Files set with playback restrictions
・Partially saved i-motion movies or Chaku-uta Full® music files
・PDF files partially downloaded page by page
If you copy the file to the microSD card, the image quality may deteriorate or the file
size becomes larger.
Still Image list/Still image in play/Movie list/Movie in
pause/Movie at the end of playback/Melody list/Melody
during playback/PDF File list/Decome-Anime Template
list, which is on the microSD cardi(
Copy to phone
If you have used “Multiple-choice” to select files to be copied, you can copy the
multiple files at a time.
See page 205 when images/i-motion movies/melodies/PDF files are stored to the
maximum.
Information
Do not pull out the microSD card during copying.
375
Data Management
Copy Files from the microSD Card to the FOMA Terminal
You can copy files from the microSD card to the i-mode folder in the
FOMA terminal. (Deco-mail pictograms are copied to the “お気に入り
(Favorite)” folder in the “Decomail-pictograph” folder and
Decome-Anime templates are copied to the “Phone” folder.)
Information
You can copy JPEG, GIF, SWF, MP4, MFi, SMF, PDF files and Decome-Anime
templates. However, you cannot copy a melody and an SWF file in excess of 100
Kbytes.
You can copy multiple JPEG, GIF, SWF and MP4 files only at a time. However, you
cannot copy multiple movies of ASF format, VGA (640 x 480) and HVGA Wide (640 x
352) size, or in excess of 10 Mbytes.
When you copy movies, the images are cut out, converted or shrunk; therefore the
image quality may deteriorate or the file size may become larger or smaller. However,
a movie whose video codec is H.264 is copied without being converted or shrunk.
When you copy VGA (640 x 480) size or HVGA Wide (640 x 352) size of a movie, the
image is converted into QVGA (320 x 240) size. When you copy VGA (640 x 480) size
or HVGA Wide (640 x 352) size of a movie, ASF file, or the file in excess of 10 Mbytes,
it might take a longer time.
You cannot copy the movie in excess of 10 Mbytes in the following cases:
・When the video codec is H.264
・When the audio codec is AAC, AAC+ (HE-AAC), or Enhanced aacPlus
・When the bit rate of the movie is in excess of the restriction
・When searching (fast forward or fast rewind) is disabled
・When the movie size is other than VGA (640 x 480), HVGA Wide
(640 x 352), QVGA (320 x 240), QCIF (176 x 144) or Sub-QCIF (128 x 96)
Some movies cannot be copied in the conditions other than the above.
Playing back a copied ASF file may take a longer time.
The file after copying takes the title of the one set on the microSD card. When no title
is set on the microSD card or the default title is unknown, the file name will be the title.
Moving Copyrighted Files
Move Files in the FOMA Terminal to the microSD Card
You can move the copyrighted file obtained from a site to the microSD
card after encoding. The moved file is then saved to the destination
folder in the “Movable contents” folder (the specified destination folder
for Chaku-uta Full® music files).
Some files you moved to the microSD card can be operated only with the
UIM you used when moving, and others can be operated only with the
UIM and the phone you used when moving.
Data Management
Still image list/Movie list/Machi-chara list/Melody list/
Kisekae Tool list/Chaku-uta Full® Music list
i(
)Move to microSDOK
Information
You can move a file to the microSD card only when the acquired source icon is “
”.
Partially saved i-motion movies, Chaku-uta Full® music files and Kisekae Tool files
cannot be moved to the microSD card.
The setting is released if you move a file set for another function.
Information
You can move a copyrighted file (with file restriction) to the FOMA terminal only if its
property for “Moved to phone” is “Available” or “Available (Same model)”. In addition,
you cannot move a file of “Available (Same model)” to the FOMA terminal other than
P-01A. See “Picture info”, “imotion info”, “Machi-chara info”, “Melody info”, “Kisekae
Tool info”, “File info”, or “Music info” to check whether the file is “Available”,
“Unavailable” or “Available (Same model)”.
The setting is released if you move a file set for another function.
The moved files are saved to the “i-mode” folder. However, the Machi-chara images
are saved to the “Machi-chara” folder, the Kisekae Tool files are saved to the “Kisekae
Tool” folder in Data Box and Chaku-uta Full® music files are saved to the “Initial
folder” in the “i-mode” folder.
Move i-αppli in the FOMA Terminal to the microSD Card
Some i-αppli programs can be moved to and saved to the microSD card.
You cannot start the i-αppli program moved to the microSD card. Move it
back to your FOMA terminal to start. However, some i-αppli programs
can be operated only with the UIM you used when moving, and some
other programs can be operated only with the UIM and the phone you
used when moving.
Software listi(
)Move to microSDYES
Move Files from the microSD Card to the FOMA Terminal
You can move a copyrighted file from the microSD card to the “i-mode”
folder in the FOMA terminal.
Still Image list/Movie list/Machi-chara list/Melody list/
Kisekae Tool list/Chaku-uta Full® Music list, which is on
the microSD cardi(
)Move to phone
See page 205 when files are stored to the maximum.
376
Move i-αppli from the microSD Card to the FOMA
Terminal
You can move an i-αppli program from the microSD card to the FOMA
terminal.
Software listi(
)Move to phoneYES
Back up/Restore Data Files Collectively
You can back up the Phonebook entries, schedule events, ToDo items,
mail messages, text memos, and bookmarks stored in the FOMA terminal
to the microSD card collectively. The backup data files are saved as a
single file every each category. When you restore backup data files, you
restore those data collectively in the FOMA terminal.
Each time you perform “Backup to microSD”, the backup data files are deleted, and
new backup data files are made.
As for the data of the category that one data is not stored with, backup data files are
made so that the backup performs the data of the category collectively. When you
restored such a backup data file, it is overwritten the data of the category that one data
is not stored with.
During back up or restore, the FOMA terminal is placed in the same status as it is out of
the service area.
When one data which you can back up in the FOMA terminal is not stored, you
cannot back it up.
Enter your Terminal Security CodeYES
When you press r to cancel backup, then already made backup data files are
deleted.
When backup is completed, the save date and time of the backup data files are
displayed.
Information
If the battery goes flat during backup, backup is suspended, and then already
made backup data files are saved as suspended backup data files. However, you
cannot resume backup from the remaining part, so do backup again to complete
backup.
Restore Backup Data Files to FOMA terminal
mLifeKitmicroSDBackup/Restore
Restore to phone
If there are no backup data files or suspended backup data files only, you cannot
perform “Restore to phone”.
Enter your Terminal Security CodeYES
When you press r to cancel restore, then already restored data files are stored
in FOMA terminal, however you cannot resume restoration from remaining part.
To restore all backup data files, perform “Restore to phone” again.
Information
When the size of backup data files is larger than the memory space of your FOMA
terminal, a part of the backup data files is not restored.
When data files that are not supported to FOMA terminal are contained to backup
data files, incompatible data files are not restored.
Delete Backup Data Files
You can delete backup data files or suspended backup data files in the
microSD card.
mLifeKitmicroSDBackup/Restore
Delete backup data
Enter your Terminal Security CodeYES
377
Data Management
Back up Data Files to the microSD Card
mLifeKitmicroSDBackup/Restore
Backup to microSD
Information
If the memory capacity of the microSD card runs short during backup, already
made backup data files are deleted, and then backup is suspended. In this case,
delete unnecessary data files in the microSD card to make memory space enough
and then try backup again.
If there are already backup data files or suspended backup data files in the microSD
card, those may take long to finish backup.
Managing Unsupported Files
Formatting microSD Card
You can save a variety of files which are not supported by the FOMA
terminal, or files in BMP and PNG format obtained by Full Browser, to the
microSD card. (See page 163 and page 223)
You can attach the saved files to an i-mode mail message to send, or
check them on a personal computer.
Data Management
mData boxSD other filesSelect a folder.
See page 382 for the
Function menu of the
Folder list.
You cannot display the
contents of the file using
the FOMA terminal.
Folder list
SD Other File list
Function Menu of the SD Other File List
When you use the microSD card for the first time, you need to format
(initialize) it. Be sure to use P-01A for formatting. The microSD card
formatted using other devices such as personal computers may not be
used properly.
Note that formatting deletes all the contents on the microSD card.
mLifeKitmicroSDRefer microSD data
i(
)microSD format
Enter your Terminal Security CodeYES
Information
Do not remove the microSD card during formatting. Malfunction of the FOMA terminal
or microSD card could result.
If you press +l(
) or -h, or receive a voice call or videophone call while
formatting the microSD card, formatting is canceled. Format it again.
Files that have been saved to the microSD card whose formatting is suspended
becomes unfixed.
You cannot format an incompatible memory card.
Required folders are automatically created when you save data to the microSD card
after formatting.
Edit title
See page 347.
File info
You can display the name and type of files.
Attach to mail
You can compose an i-mode mail message with the file attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Copy
See page 348.
Move
See page 348.
Delete this
See page 348.
You can check and recover the microSD card.
Delete all
See page 348.
Multiple-choice
See page 348.
Memory info
You can display the used memory space (estimate).
378
Checking microSD Card
mLifeKitmicroSDRefer microSD data
i(
)Check microSDYES
Information
Do not remove the microSD card during Check microSD. Malfunction of the FOMA
terminal or microSD card could result.
You cannot execute Check microSD for the unformatted microSD card or
incompatible memory card.
When you execute Check microSD, the microSD card may not be recovered
correctly, the data existed before executing Check microSD may be deleted, or the
microSD card itself may be initialized depending on the condition of the microSD card.
If you press +l(
) or -h, or receive a voice call or videophone call during
Check microSD, Check microSD is canceled.
If you cancel Check microSD midway, data not recovered may remain. In this case,
try Check microSD again.
It may take long to complete Check microSD depending on the data volume stored on
the microSD card.
See page 349 for checking the used memory space for the still images or movies.
mLifeKitmicroSDRefer microSD data
i(
By connecting the microSD card to the microSD card adapter, you can
use the microSD card on a personal computer which supports SD card.
The microSD card adapter is available at electronics retail stores, etc.
For installing the microSD card adapter, refer to the instruction manual
for the microSD card adapter.
Use FOMA Terminal as microSD Reader/Writer
With a microSD card inserted, connect the FOMA terminal to a personal
computer; then you can read the data from or write the data onto the
microSD card.
The following equipment is required:
Connector Cable: FOMA USB Cable with Charge Function 01/02 (option)
Personal Computer: Personal computer having the USB port (Universal Serial Bus
Specification Rev 1.1 compliant) that can be connected with the
FOMA USB Cable with Charge Function 01/02 (option)
Compatible Operating Systems: Windows 2000, Windows XP, Windows Vista
(Japanese version in each)
)microSD info
mSet./ServiceOther settingsUSB mode setting
microSD mode
When you set to “microSD mode”, “ ” appears on the Stand-by display.
To save WMA files from your personal computer to the microSD card, set to
“MTP mode”. When you set to “MTP mode”, “ ” appears on the Stand-by
display.
To use the FOMA terminal for packet communication, 64K data communication,
data sending/receiving (OBEX™ communication), and for calls with USB
Hands-free compatible device, set mode to “Communication mode”.
Information
As the microSD card contains the system files for the card, the memory space is
smaller than that described on the microSD card even if it contains no data.
Connect the FOMA terminal to a personal computer
using the FOMA USB Cable with Charge Function 01/02
(option).
The personal computer recognizes the microSD card.
“
” appears on the desktop, and “ ” appears on the Stand-by display.
Also, “ ” is displayed while the microSD card is in the FOMA terminal.
379
Data Management
Displaying Capacity of microSD Card
You can display the used and unused memory space (estimate) on the
microSD card.
Using a microSD Card with a Personal
Computer
Information
Data Management
If the FOMA terminal and personal computer are not correctly connected, or the
remaining battery level of the FOMA terminal shows very low or goes flat, you cannot
send or receive data. In addition, you may lose data.
While data is being read or written, do not pull the FOMA USB Cable with Charge
Function 01/02 off. Not only you cannot send or receive data, but also you may lose
the data.
While data is being read or written, you cannot set this function. Further, make sure
that you do not “Reset settings” or “Initialize” during reading/writing. Malfunction of the
microSD card could result.
When you set this function to “MTP mode”, this function is not reset by “Reset
settings”. And, this function is set to “Communication mode”, when you turn on the
FOMA terminal after you remove battery.
You cannot read from/write to a personal computer while reading from/writing to the
FOMA terminal, and vice versa.
To use the DOCOMO keitai datalink, set it to “Communication mode”.
Folder Configuration on microSD Card
The FOMA terminal creates the following folders on the microSD card to
save data files. When you write files to the microSD card from a personal
computer, you need to write in the specified folder configuration and file
names.
DCIM (Folder for DCF standard still images)
△△△_PANA
P△△△zzzz.### (Extension is JPG, or GIF.)
MISC [DPOF folder (This folder is created automatically when “DPOF setting” on
page 396 is set.)]
SD_VIDEO (Folder for movies)
PRL◇◇◇ (Folder for movies)
MOL◇◇◇.### (Extension is 3GP, SDV, ASF, or MP4.)
MGR_INFO (Folder for video management information)
PRG◇◇◇ (Folder for videos)
380
PRIVATE
DOCOMO
STILL (Folder for non-DCF standard still images)
SUD□□□
STILzzzz.### (Extension is JPG, GIF, or SWF.)
DOCUMENT (Folder for PDF files)
PUD□□□
PDFDC□□□.PDF
RINGER (Folder for melodies)
RUD□□□
RINGzzzz.### (Extension is MLD, or SMF.)
TORUCA (Folder for ToruCa files)
TRC□□□
TORUC□□□.TRC
MMFILE [Folder for non-SD-VIDEO standard movies (include music data of
AAC format)]
MUD□□□
MMFzzzz.### (Extension is 3GP, SDV, ASF, or MP4.)
WM_SYSTEM
WM
DECOIMG (Folder for Deco-mail pictograms)
DUD□□□
DIMGzzzz.### (Extension is JPG, or GIF.)
OTHER (Folder for SD other files)
OUD□□□
OTHER□□□.### (Extension is up to three-digit half-pitch alphabets that
the FOMA terminal cannot recognize.)
MOVIE (Folder for PC movie files)
MVUD□□□
MOVIE□□□.### (Extension is WMV, WMA, WVX, WAX, ASF, or ASX.)
DECO_A_T (Folder for Decome-Anime template)
DTUD□□□
DEATZZZZ.VGT
BACKUP (Folder for backup data)
SD_PIM
ADDRESS (Folder for backup data file of Phonebook entries)
ADDRESS.VCF
SCHEDULE (Folder for backup data file of schedule events)
SCHEDULE.VCS
MAIL
INBOX (Folder for backup data file of received mail messages)
INBOX.VMG
SENTBOX (Folder for backup data file of sent mail messages)
SENTBOX.VMG
OUTBOX (Folder for backup data file of unsent mail messages)
OUTBOX.VMG
NOTE (Folder for backup data file of text memos)
NOTE.VNT
BOOKMARK (Folder for backup data file of bookmarks)
BOOKMARK.VBM
TABLE (Folder for additional information)
MEIGROUP
PMC
DOCUMENT (Folder for Word, Excel, or PowerPoint files)
DOC□□□
DOCDC□□□.### (Extension is XLS, DOC, or PPT.)
TABLE
DOCUMENT
SD_AUDIO (Folder for SD-Audio)
SD_BIND (Folder for i-αppli or movable contents)
SVC▲▲▲▲▲
■■■■◆◆◆◆
△△△: A three-digit half-pitch numeral of 100 through 999 (Use the same numerals for
the folder name, and for the file name saved to that folder.)
□□□: A three-digit half-pitch numeral of 001 through 999
◇◇◇: A hexadecimal numeral※ of 001 through FFF using half-pitch numerals of 0
through 9 and half-pitch alphabets of A through F
▲▲▲▲▲: A five-digit half-pitch numeral of 00001 through 65535
■■■■ and ◆◆◆◆: Hexadecimal numerals※ of 0001 through FFFF using half-pitch
numerals of 0 through 9 and half-pitch alphabets of A through F
zzzz: A four-digit half-pitch numeral of 0001 through 9999
###: Extension
※The hexadecimal numerals are carried up every 16, unlike the way the decimal
numerals are carried up every 10.
Using a personal computer, you can write a file name of up to 64 bytes (including
extension) of free characters for a PDF file, SD other file, PC movie file, Word file, Excel
file and PowerPoint file.
File
Folder
Number of
savable files/time
Still image (DCF standard)
DCIM
See page 530.
Still image (Non-DCF standard)
STILL
Approx. 58,390
Movie
SD_VIDEO
See page 532.
Movie (Video)
SD_VIDEO
99
MMFILE
Approx. 58,390
Movie (Non-SD-VIDEO standard)
PC movie file
MOVIE
Approx. 58,390
Melody
RINGER
Approx. 58,390
PDF file
DOCUMENT
Approx. 58,390
PMC
Approx. 58,390
Word, Excel, PowerPoint file
SD-Audio
SD_AUDIO
999
ToruCa file
TORUCA
Approx. 58,390
Deco-mail pictogram
DECOIMG
Approx. 58,390
Decome-Anime template
DECO_A_T
Approx. 58,390
OTHER
Approx. 58,390
Phonebook entry, schedule event, ToDo item,
mail message, text memo, bookmark
SD_PIM
Approx. 58,390
i-αppli
SD_BIND
Movable contents
SD_BIND
SD other file
Approx. 58,390
For the microSD card larger than 4 Gbytes, the number of savable files [except “Movie
(Video)” and “SD-Audio”] are approx. 65,530.
The number of savable files and time for saving vary depending on the memory
capacity of the microSD card. You can save more files by adding folders to save files to.
You might not be able to save the maximum number of files depending on the file size.
You can check used and unused space of the microSD card by “microSD info”.
Information
Folder and file names may be displayed in lowercase characters depending on the
personal computer you use.
When the personal computer is set not to display extensions and hidden folders,
change the setting and then operate. For how to change the setting, refer to the
instruction manual for your personal computer or Help.
Do not use the personal computer to delete or move the folders on the microSD card.
The microSD card might not be read by P-01A.
381
Data Management
SD_PIM (Folder for Phonebook entries, schedule events, ToDo items, mail
messages, text memos, and bookmarks)
PIM▲▲▲▲▲.### (Extension is VCF for Phonebook entries, VCS for schedule
events and ToDo items, VMG for mail messages, VNT for text
memos, and VBM for bookmarks.)
■The number of files and time that can be saved to the microSD card
Data Management
Information
You cannot see the files in the “SD_AUDIO”, “SD_BIND” and “PRG◇◇◇” folders on
a personal computer, as they are encrypted.
When you save data in the “PRG◇◇◇” folder by using a personal computer, you
might not be able to delete the video using the FOMA terminal.
When you delete, overwrite, or write a file on a personal computer, ensure that you do
not use the same file name you have once used. Even when you have deleted that
file, use a different file name.
All folders and files in “BACKUP” folder are deleted and created a new one each time
you perform “Backup to microSD”. Further, all folders and files in “BACKUP” folder are
deleted when you perform “Delete backup data”.
On the FOMA terminal, you might not be able to display or play back a data item
which was saved to the microSD card from other devices. On other devices, you
might not be able to display or play back a data item which was saved to the microSD
card from the FOMA terminal.
To procure a microSD reader/writer or PC card read adapter, inquire respective
manufacturers for the operation of microSD card beforehand.
Managing Folders
Files in My picture, MUSIC, imotion, Melody, My documents, Kisekae
Tool (SD), Machi-chara (SD), PC Movie, Document viewer, and SD other
files in Data Box are managed files in the respective folders.
See page 285 for folder operations of MUSIC.
Even when the files in the “Movable contents” folder are listed, the Function menu in
the Folder list is displayed.
Function Menu of the Folder List
Add folder
382
You can create a user folder.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters in the
FOMA terminal.
You can enter up to 31 full-pitch/63 half-pitch characters on the
microSD card. You can enter up to 10 full-pitch/20 half-pitch
characters for a folder in the “Movable contents” folder.
Edit folder name
You can edit the name of a user folder, or a folder in the
“Decomail-pictograph” folder in the FOMA terminal.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters in the
FOMA terminal.
You can enter up to 31 full-pitch/63 half-pitch characters on the
microSD card. You can enter up to 10 full-pitch/20 half-pitch
characters for a folder in the “Movable contents” folder.
Delete folder
You can delete a user folder and all files in the folder.
Enter your Terminal Security CodeYES
Folder security
[My picture/
imotion]
You can set the folder to open only when you enter your Terminal
Security Code.
Enter your Terminal Security CodeYES
The folder changes to “
”.
To release it, perform the same operation.
Send all Ir data
[My picture/
imotion/melody
/My document]
See page 389.
DEL all frm folder
[My picture only]
You can delete all the files in the folder selected in “i-mode”,
“Camera”, “Decomail-picture”, “Decomail-pictograph”, and user
folder in “My picture”.
Enter your Terminal Security CodeYES
Edit playlist
[Melody only]
You can select up to 10 melodies and program them in order as
you like. This is displayed while you are selecting “Playlist”.
Select a playing order from <1st> through <10th>
Select a folderSelect a melody.
To release a programmed melody, select “Release this”.
Repeat the operations and complete the playlist editing
l(
Release playlist
[Melody only]
You can release all the programmed melodies from the playlist.
This is displayed while you are selecting “Playlist”.
YES
Select storage
You can set the destination folder for when you save the shot still
images/movies or the melodies and PDF files obtained by
downloading or data communication to the microSD card.
YES
Information
Data Management
You can add up to 20 folders in the FOMA terminal.
You cannot add folders on the microSD card in the following cases:
・When 900 folders are contained in “Picture”
・When 4,095 folders are contained in “Movie”
・When 999 folders are contained in “Image Box”, “Decomail-pictograph”, “Melody”,
“Other contents”, “My documents”, “Document viewer”, or “SD other files”.
You cannot edit the Folder-Security-activated folder name.
When a melody set for another function is deleted, the setting returns to the default.
(When the melody is set for an alarm tone of “Schedule”, “ToDo” or “TV timer”, or for
“Alarm”, it switches to “Clock Alarm Tone”.)
You can set it only for “i-mode”, “Camera”, “User folder”, and “Voice recorder”.
When you select a folder with folder security, the display for entering your Terminal
Security Code appears. Enter your Terminal Security Code to temporarily release
folder security.
If you change or delete the file name, title, or contents of the melody stored in the
playlist, all the melodies are released from the playlist.
Information
The following icons are displayed for the folder set as a destination folder:
“
” . . The folders in the “Picture” folder and “Movie” folder
“
” . . The folders in “My documents”, “Document viewer”, and “SD other files”
The folders in the “Decomail-pictograph” folder, “Image Box” folder, and
“Melody” folder
“
” . . The folders in the “Movable contents” and “Kisekae Tool” folder
“
” . . The folders in the “Other contents” folder
When you execute Check microSD, or create or edit a folder by using a personal
computer, the destination folder on the microSD card might be changed. When the
setting is changed, set the destination folder again.
383
Data Management
Using Infrared Communication
■List of data files you can transfer
Transfer terms
The FOMA terminal conforms to IrMC™ version 1.1 standard.
You can exchange data files with the devices supporting the infrared
communication function. However, you cannot exchange some files
depending on the other party’s device.
Transferable data
The distance for infrared communication should be within about 20 cm. Do not move
the FOMA terminal with the infrared data port pointed to the receiving end until data
transfer ends.
Hold the FOMA terminal with your hands securely so that it does not move.
If you expose the FOMA terminal to direct sunlight or put it under fluorescent lights or
near an infrared equipment, you may not be able to transmit infrared ray normally due
to their influence.
First set at the receiving end and begin sending data from the sending end within 30
seconds.
During exchange, the FOMA terminal is placed in the same state as it is out of the
service area, so you cannot make/receive voice calls, videophone calls or PushTalk
calls, use packet communication such as i-mode or mail, or use data communication.
Multiple
items
All items
Phonebook (Own number)
○
—
Up to 1,000 items
Schedule※1
○
—
Up to 2,500 items
ToDo
○
—
Up to 100 items
Received mail※2
○
—
Up to 2,500 items
Sent mail
○
—
Up to 1,000 items
Draft mail
○
—
Up to 20 items
Decome-Anime template
○
—
Up to 100 items
Text memo
○
—
Up to 20 items
Melody※3
○
—
Up to 3,500 items
Still image file※4, ※5
○
○
Up to 3,500 items
Movie file※6
○
○
Up to 3,500 items
PDF file※3, ※7
○
—
Up to 3,500 items
ToruCa file※4
○
○
Up to 495 items
○
—
Up to 100 items each for
i-mode and Full Browser
○
—
Up to 5 items
Bookmark (i-mode/Full Browser)※8
Within about 20
LCS client information
Within ±15°
from the center
○: Can be transferred
—: Cannot be transferred
※1 You cannot send/receive holidays or i-schedule downloaded from i-concier.
※2 You can send/receive up to 30 Area Mail messages separately. (2,530 messages in
total)
※3 You cannot send/receive some files.
※4 Includes Flash movies.
※5 You cannot send/receive original animations and still images recorded by 1Seg.
※6 You cannot send/receive ASF files and videos recorded by 1Seg.
※7 The i-mode bookmarks may be deleted.
※8 When sending/receiving bookmarks, the folder-sort setting may not be reflected.
Infrared data
384
One item
■Storage location and order of received files
Data
Storage location/Order
Phonebook receive one data The phone number is stored to the lowest empty memory
(Own
number in “010” through “999” in the Phonebook. If all
number)
memory numbers “010” through “999” are occupied, the
phone number is stored to the lowest empty memory
numbers in “000” through “009” (2-touch dial).
receive all data Stored in the same memory number as that of the sender.
Schedule
Data
Melody
receive all data Stored in the same folder as that of the sender in the
same order.
Still Image receive one data/ Stored on the top in the “i-mode” folder in “My picture”
file
receive multiple inside “Data box”.
data
receive all data Stored in the same folder as that of the sender in the
same order.
receive one data Stored with the starting date/time of the schedule event.
receive all data Stored with the same date and time as those of the
sender.
ToDo
receive one data Stored on the top in the ToDo list.
Received
mail
receive one data Stored in the “Inbox” folder on the Inbox Folder list with
the same date and time as that of the sender.
Movie file
receive all data Stored in the same order as that of the sender.
Sent mail
receive all data Stored in the same folder as that of the sender in the
same order.
PDF file
Draft mail
receive one data Stored with the same date and time as that of the sender.
DecomeAnime
template
receive one data Stored on the top in the “Phone” folder in
“Decome-Anime” in “Template” inside “Mail”.
ToruCa file receive one data/ Stored on the top in the “ToruCa” folder.
receive multiple
data
receive all data Stored in the same folder as that of the sender in the
same order.
receive all data Stored with the same date and time as that of the sender.
receive all data Stored in the same order as that of the sender from the
top of the list.
Text memo receive one data Stored in the first .
receive all data Stored in the same order as that of the sender from the
top of the list.
receive one data Stored on the top in the “i-mode” folder in “My documents”
inside “Data box”.
receive all data Stored in the same folder as that of the sender in the
same order.
receive one data Stored in the “Outbox” folder on the Outbox Folder list
with the same date and time as that of the sender.
receive all data Stored in the same folder as that of the sender with the
same date and time.
receive one data/ Stored on the top in the “i-mode” folder in “imotion”
receive multiple inside “Data box”.
data
Bookmark
receive one data Stored on the top in the “Bookmark” folder each for
i-mode and Full Browser.
receive all data Stored in the same folder as that of the sender in the
same order.
LCS client receive one data Stored in the first .
information receive all data Stored in the same order as that of the sender from the
top of the list.
Information
You cannot send the following files:
・Files whose output from the FOMA terminal is prohibited
・Partially saved files
・Pre-installed Deco-mail pictures
・Phonebook entries and SMS messages on the UIM
385
Data Management
receive all data Stored in the same folder as that of the sender with the
same date and time.
Storage location/Order
receive one data Stored on the top in the “i-mode” folder in “Melody” inside
“Data box”.
Data Management
Information
You cannot send the files on the microSD card. Copy or move to the FOMA terminal
and then send.
You can send/receive up to 9 full-pitch/18 half-pitch characters for a title of a still
image, movie, or PDF file, or up to 31 full-pitch/63 half-pitch characters for a title of a
melody.
When you send a mail message, the file attached to the mail message is also sent.
However some files cannot be sent depending on the file type.
Depending on the mobile phone at the receiving end, subjects of i-mode mail
messages cannot be received completely.
The mail message with an attached file which has not been obtained, or the mail
message containing the link information for starting an i-αppli program is sent after the
file or information is deleted.
When the maximum number of storable received mail messages (see page 534) is
exceeded, the messages are overwritten in the following order; messages in the
“Trash box” folder → the oldest received message.
When the maximum number of storable sent mail messages (see page 534) is
exceeded, the oldest unprotected mail message in the Outbox folder is overwritten.
When the Decome-Anime template contains a file whose output from the FOMA
terminal is prohibited, the mail message is sent after the file or text data is deleted.
When you send a ToruCa file (details) using infrared rays, the confirmation display
appears asking whether to forward the file including the detailed information. In this
case, select “YES” to send it with the detailed information, or select “NO” to send the
ToruCa file as a file before receiving the detailed information.
The ToruCa file (details) that contains data whose output from the FOMA terminal is
prohibited is sent as a ToruCa file before receiving the detailed information.
You cannot receive Phonebook entries while Restrict Dialing is activated. At sending,
you can send only the Phonebook entries set with Restrict Dialing and data of Own
Number.
It may take long to forward data or you might not be able to receive data depending on
the data size.
You cannot store a still image in excess of 2 Mbytes, movie in excess of 10 Mbytes,
melody in excess of 100 Kbytes, PDF file in excess of 2 Mbytes, Decome-Anime
template in excess of 100 Kbytes, ToruCa file in excess of 1 Kbyte, or ToruCa file
(details) in excess of 100 Kbytes.
If the FOMA USB Cable with Charge Function 01/02 (option) is connected to the
FOMA terminal, you may not be able to perform infrared communication.
You cannot send files that are not supported by the device at the receiving end.
386
Sending/Receiving One or Multiple Data
You can send/receive the data files one by one using infrared rays.
You can send/receive multiple still images, movies, and ToruCa files at a
time.
■Notes on sending/receiving
In Secret Mode, you can send secret data as well. However, in Secret Data Only, you
can send only the secret data.
If you receive a Phonebook entry stored as secret data during Secret Mode or Secret
Data Only, the Phonebook entry is stored as an ordinary one.
When sending a Phonebook entry, you cannot send the stored secret code and voice
dial entry.
Send One or Multiple Data
Display of the data file to be senti(
Send Ir data
To send a Phonebook entry, select “Send Ir/BT/iC trans” → “Send Ir data” from
the Function menu and select “Send phonebook”.
To send a schedule event, select “Ir/
transmission” → “Send Ir data” from the
Function menu and select “Send”.
To send a mail message, Decome-Anime templates, ToruCa file or bookmark,
select “Ir/
transmission” from the Function menu and select “Send Ir data”.
To send multiple files, select the files you want to send by “Multiple-choice”. Press
i(
) to select “Send Ir data”.
YES
To send multiple files, select “YES” by a factor of selected number of files, and
send them.
Receive One or Multiple Data
mLifeKitReceive Ir data
+m-7-9
You can paste the Ir data receiving function to the desktop. (See page 31)
2
ReceiveYES
When you receive Phonebook entries in which phone numbers are stored, the
confirmation display appears asking whether to store them also in the PushTalk
Phonebook.
The confirmation display appears asking whether to continue receiving after
receiving one data file. When you received multiple files, select “YES”.
Send All Data
Display of the data file to be senti(
Send all Ir dataEnter your Terminal Security Code.
To send the Phonebook entries, select “Send Ir/BT/iC trans” → “Send Ir data”
from the Function menu and select “Send all phonebook”.
To send schedule events from Schedule list or Detailed Schedule display, select
“Ir/
transmission” → “Send Ir data” from the Function menu and select “Send
all”.
To send mail messages, Decome-Anime templates, ToruCa files or bookmarks,
and to send schedule events from Calendar display, select “Ir/
transmission”
from the Function menu and select “Send all Ir data”.
Information
When you receive an instruction for starting a software program, and you have
already downloaded a compatible software program, that software program starts. If
you have not put a check mark for “Ir iαppli To” of “Set iαppli To”, the software
program does not start up automatically.
Sending/Receiving All Data
■Notes on sending/receiving all data files
Receiving all data files deletes all data you have stored including the secret data and
protected data, and the received data overwrites the existing data. The data you have
stored in “Secret mode” is deleted as well. Check that no important data is stored
before receiving all data files.
If you send all Phonebook entries, the “Own number” data is also sent. All the data of
“Own number” at the receiving end is overwritten except the own number. Mail address
is also overwritten by sender’s address, so change it at the receiving end.
If you send all Phonebook entries, PushTalk Phonebook entries are also sent.
Information of voice dial entries are not sent.
The Phonebook entries stored as secret data are sent not only during Secret Mode but
also any other time. The sent secret data is stored as secret data at the receiving end,
too.
The group names in the Phonebook you have received are stored, so the data set in
“Group setting” is also overwritten.
Note that the schedule events at the receiving end are all deleted if you send all ToDo
items to the phone that does not support ToDo.
You can send/receive the protected sent/received mail messages.
Enter the session numberYES
Enter any four-digit number as the session number.
Receive All Data
mLifeKitReceive Ir data
+m-7-9
You can paste the Ir data receiving function to the desktop. (See page 31)
Receive allEnter your Terminal Security Code
Enter the same session number as that entered at the
sending endYESYES
The stored data is deleted, then receiving starts.
Information
When you receive Phonebook entries in which still images are stored or mail to which
files are attached, and the multiple same still images or files are found, only one image
or file is stored.
387
Data Management
By using infrared rays, you can collectively send/receive Phonebook
entries, schedule events, ToDo items, text memos, bookmarks, mail
messages, ToruCa files, and LCS client information.
To send all data files, enter a session number (any four-digit number).
The receiving end needs to enter the same session number.
Using Infrared Remote Control Function
You can use the FOMA terminal as a TV remote control by starting the
i-αppli program.
To use remote control devices, you may need to download the software program for
those devices. [The pre-installed “Gガイド番組表リモコン (G Guide Program List
Remote control)” supports the infrared remote control function.] The key operation for
the remote control differs depending on the software program.
This function does not work with some devices.
Communication might be affected by compatible devices and the ambient light.
You cannot use the infrared remote control during Self Mode.
Data Management
Infrared Remote Control
Turn the FOMA terminal’s Infrared data port to the
front of a device to be operated. You can operate
within about 4 meters away from the device.
The radiation angle of the infrared rays is within ±15°
from the center.
Within
±15° from
the center
Within about
4 meters
Infrared data port
+m-2-6
Communication Setting
For when you forward Phonebook entries using infrared rays, iC
communication, microSD card, or DOCOMO keitai datalink, you can
specify whether to forward the stored still images together.
mPhonebookPhonebook settings
Forwarding imageON or OFF
iC Communication Function
iC communication is the function that enables you to send/receive data
files to/from another FOMA terminal using the FeliCa reader/writer
function. You can send/receive data files by facing the FeliCa
mark of
your FOMA terminal toward that of another FOMA terminal supporting
the iC communication function. However, you cannot exchange some
files depending on the other party’s FOMA terminal.
The type of files and conditions of forwarding
are the same as those of infrared
communication. (See page 384) However, you
cannot send multiple files at a time, and send
all data files of Decome-Anime templates and
all data files in Data Box.
You cannot execute iC communication while
“IC card lock” is activated.
You might have difficulty in sending or
receiving files depending on the destination
FOMA terminal. In that case, move a FeliCa
mark
close to or away from the other
FeliCa mark or move each side up, down, left,
or right.
Face one another’s
FeliCa marks
Sending/Receiving One Data
You can send/receive the data files one by one using iC communication.
See “■Notes on sending/receiving” on page 386 as well.
Send One Data
You cannot use this function during charging.
Display of the data file to be senti(
transmission
To send a Phonebook entry, select “Send Ir/BT/iC trans” → “
transmission”
from the Function menu and select “Send phonebook”.
To send a schedule event, select “Ir/
transmission” → “
transmission” from
the Function menu and select “Send”.
To send a mail message, Decome-Anime templates, ToruCa file or bookmark,
select “Ir/
transmission” from the Function menu and select “
transmission”.
388
2
YES
Receive All Data
You cannot use this function during Multitask.
Receive One Data
You cannot use this function during Multitask.
Face the FeliCa mark
of the FOMA terminal of the
receiving end while the Stand-by display is shown to
that of the FOMA terminal of the sending endYES
When you receive a Phonebook entry in which a phone number is stored, the
confirmation display appears asking whether to store it also in the PushTalk
Phonebook.
Face the FeliCa mark
of the FOMA terminal of the
receiving end while the Stand-by display is shown to
that of the FOMA terminal of the sending end.
YESEnter your Terminal Security Code
Enter the same session number as that entered at the
sending end.
The stored data is deleted, and then receiving starts.
Information
When you receive Phonebook entries in which still images are stored, and the
multiple same still images are found, only one image is stored.
Sending/Receiving All Data
See “■Notes on sending/receiving all data files” on page 387 as well.
Send All Data
You cannot use this function during charging.
Display of the data file to be senti(
All
transmission
Enter your Terminal Security Code.
Using Voice Recorder
This function is for recording voices. You can record voices in a meeting
instead of taking notes.
This function is the same as the one for when “Movie type set” is set to “Voice” in Movie
Mode.
You can play back the saved voice from “imotion” of “Data box”.
See page 531 for the estimate of recordable time.
mLifeKitVoice recorder
To send the Phonebook entries, select “Send Ir/BT/iC trans” →
“
transmission” from the Function menu and select “Send all phonebook”.
To send schedule events from Schedule list or Detailed Schedule display, select
“Ir/
transmission” → “
transmission” from the Function menu and select
“Send all”.
To send mail messages, ToruCa files or bookmarks, and to send schedule event
from Calendar display, select “Ir/
transmission” from the Function menu and
select “All
transmission”.
Enter the session numberYES
Enter any four-digit number as the session number.
Voice Recorder
Recording display
389
Data Management
By using iC communication, you can collectively send/receive
Phonebook entries, schedule events, ToDo items, text memos,
bookmarks, mail messages, ToruCa files, and LCS client information.
To send all data files, enter a session number (any four-digit number).
The receiving end needs to enter the same session number.
2
Press Oo(
) or 0.
Recording starts.
Press Oo(
) or 0.
Recording ends. The Voice Recorder Saving Pre-check display appears.
Press m(
) to play back the recorded voice.
Press Oo(
) or 0.
Function Menu of the Voice Recorder Recording display
Data Management
File size setting
Select an item.
Mail restrict’n(S) . . . . . You can record up to 500 Kbytes.
Mail restrict’n(L) . . . . . You can record up to 2 Mbytes.
Long time . . . . . . . . . . . You can record for a long time. The
voice is saved to the microSD card.
Auto save set
File restriction
Memory info
Play
See page 390.
Save
See page 390.
Attach to mail
You can save the recorded voice and attach it to i-mode mail.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Store in
See page 390.
File restriction
See page 247.
Cancel
You do not save the recorded voice.
Displaying PDF Data
You can display the stored PDF files.
Storage setting
Store in
Function Menu of the Voice Recorder Saving Pre-check
display
You can set the storage location for the recorded voice.
When you set to “Phone”, the voice is saved to “Voice
recorder” in the “imotion” folder. When you set to “microSD”,
it is saved to the folder in “Other contents” which you set for
“Select storage”.
Phone or microSD
You can set whether to automatically save the recorded voice
after you finish recording.
ON or OFF
See page 247.
mData boxMy documentsSelect a folder
Select a PDF file.
Each time you press m
from the Folder list, you can
switch between the folders
in the FOMA terminal and
the microSD card.
See page 382 for the
Folder list
PDF File list
Function menu of the
Folder list.
If you cannot display a preview image, any of the following images are displayed:
You can display the used memory space (estimate)/number of
stored items.
Cannot be
displayed
Does not support
(PDF file displayed
as “
” or “
”)
See page 204 when the PDF file is set with a password.
390
Does not support
(PDF file displayed
as “
”)
■Operations when displaying a PDF file
See page 391 for when you operate from the Function menu.
Operation
Key operation
Operation
Copy to microSD
See page 374.
Copy to phone
See page 375.
Key operation
Copy
See page 348.
Zo
Next page
c9>
Move
See page 348.
Lower scroll
Xo
Previous page
m7<
Add desktop icon
See page 31.
Left scroll
Co
Search
Delete this
See page 348.
Right scroll
Vo
Search next
Delete all
See page 348.
Call up the key
operation guide
Search previous
Multiple-choice
See page 348.
Call up the bookmark
list
Memory info
You can display the used memory space (estimate)/number of
stored items.
Sort
See page 349.
Listing
You can change the displayed contents of the PDF File list.
Title or Image
You can switch the lists also by pressing c(
) from the
PDF File list.
Zoom in
Zoom out
Fit page
Add bookmark
(for at least one
second)
Information
When many files are stored in the FOMA terminal or the microSD card, it may take
long to access them. It may take long to display the PDF file depending on the PDF
file.
Some files might not be correctly displayed.
When you try to display undownloaded pages while the PDF file partially downloaded
is displayed, downloading of the page starts.
Function Menu of the PDF File List
Information
When you use “Image” to display PDF files, they might appear different from the
actual images depending on the PDF files.
Function Menu while PDF File is Displayed
Zoom in
You can zoom in the PDF file.
You can zoom in the PDF file up to 1,000%.
Edit title
See page 347.
Document info
You can display the PDF file name, saved date/time, etc.
Zoom out
Attach to mail
You can compose an i-mode mail message with the PDF files
attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
You can zoom out the PDF file.
You can zoom out the PDF file up to 8%.
Go to
You can move to another page of the PDF file.
Select the page you want to move to.
If you select “Specified page”, enter the page number you
want to move to in the page number field, and select “OK”;
then you can access to the specified page.
Send Ir data
See page 386.
Send all Ir data
See page 389.
transmission
See page 388.
391
Data Management
Upper scroll
Search
You can display the screen in which the specified character
string is contained. The point that matches the specified
character is marked in yellow green.
SearchSelect the search string field
Enter a character string to be searched for.
You can enter up to 8 full-pitch/16 half-pitch characters.
Page layout
At Viewer
start-up
Single page
Display link
You can display links set in the PDF file. Internal links (links
set in the PDF file displayed), Web To, Mail To, and Phone
To/AV Phone To are available for the links.
Select a link.
When multiple links are found in the display, you can select
a link by pressing Bo.
When you select an internal link, you can move to the linked
page in the PDF file. See page 206 for another link.
Page info ON/OFF
You can set whether to display the zoom magnification, page
number, and scroll bar for displaying the PDF file.
Select an itemDisplay or Not display
Put a check mark for search conditions to be specified
l(
If you select “Search prev.” or “Search next”, you can
continue to search under the same condition.
Data Management
Bookmark/mark
Disp. bookmark
See page 393.
Add bookmark
You can set a bookmark (i-mode bookmark) for the page
currently displayed and can display the desired page easily by
selecting the bookmark. You can set up to 10 bookmarks.
YESSelect the title fieldEnter a titleOK
You can enter up to 64 full-pitch/128 half-pitch characters.
See page 394 when bookmarks are stored to the maximum.
Display mark
Add mark
At Viewer
start-up
Display
Document info
Rotate view
392
See page 391.
See page 393.
Save
See page 393.
You can store the currently displayed page number and the
position within the page as the mark. You can use the stored
mark as the sign of the reference point. You can set up to 10
marks.
YES
See page 394 when marks are stored to the maximum.
Download remain
You can download all pages of the PDF file which you have
not completely downloaded yet such as partially downloaded
page by page or failed to be downloaded owing to
disconnection of communication midway.
YES
Capture screen
You can cut out a part of the display and save it as JPEG
image.
Oo(
)YESSelect a folder.
See page 205 when images are stored to the maximum.
Attach to mail
You can compose an i-mode mail message with the PDF files
attached.
Go to step 2 on page 146.
View types
View mode
You can change the display layout of the PDF file.
Single page, Continuous or Continuous-facing
You can change display format of the PDF file.
Select a display format.
If you select “User defined”, enter the magnification value in
the magnification specification field, and select “OK”; then
you can display the page at the specified magnification.
The magnification you can specify is 8 through 1,000%.
If you save a file after changing the display format, it is
displayed at the saved magnification next time.
90° to right or 90° to left
Delete all
Information
The search conditions work as shown below:
Match case: Identifies between uppercase and lowercase for search.
Whole words only: Searches for character strings that completely match by unit of a
word.
Search upward: When you do “Search next”, you can search backwards to the first
page from the start page.
Search ‘?’ as wildcard: “?” mark (half-pitch) entered in the search string field is set for
a search condition as a random character.
Search in this page: Searches in the currently displayed page only.
You cannot change the layout of the partial PDF file.
You might not be able to cut out the display depending on the security setting of the
PDF file.
While a PDF file is displayedi(
Bookmark/markDisp. bookmark
Bookmark or i-mode bookmarkSelect a bookmark.
Some bookmarks that have been set beforehand are categorized into tier-levels.
Press i(
) to display the bookmarks at the lower level. However, all the
bookmarks at the third-tier level or lower are displayed at the third-tier level.
Display Mark
You can list the marked pages and positions stored in the PDF file.
When you select a mark, you can display the page in which the mark is
stored.
Function Menu while the Mark List is Displayed
Delete
YES
Delete selected
Put a check mark for marks to be deletedl(
YES
Delete all
Enter your Terminal Security CodeYES
Save
Delete
YES
Delete selected
Put a check mark for bookmarks to be deleted
l(
)YES
While a PDF file is
displayedi(
)SaveYES
The PDF file once saved to the FOMA terminal or microSD card is overwritten each
time you save it. (The operation in step 2 is not required.)
The PDF file that is not saved to the FOMA terminal or microSD card is newly
saved.
With the PDF file that was re-downloaded from the first page owing to updating at
the server’s end, the confirmation display appears asking whether to overwrite
the current data. Select “YES” to overwrite it. Select “NO” to newly save.
Enter a title.
You can enter up to 64 full-pitch/128 half-pitch characters.
Delete
You can save the PDF files. You can save the newly downloaded pages
and added bookmarks/marks.
You can save up to 3,500 files in total sharing the memory space with
other data files, however, the number of files you can save decreases
depending on the data volume. (See page 534)
Function Menu while i-mode Bookmark is Displayed
Edit title
While a PDF file is displayedi(
Bookmark/markDisplay markSelect a mark.
Select a destination folder.
See page 205 when PDF files in the FOMA terminal are stored to the maximum.
393
Data Management
Display Bookmark
You can list the bookmarks set for the PDF file and the i-mode
bookmarks additionally set.
By selecting a bookmark, you can display the page for which the
bookmark is set.
Enter your Terminal Security CodeYES
When bookmarks or marks are set to the maximum
If you try to add a bookmark or mark to the PDF file for which 10 bookmarks or marks
have been set, or if you try to save the PDF file for which 11 or more bookmarks or marks
have been set, the confirmation display appears asking whether to add/save the
bookmark or mark after unnecessary ones are deleted.
1. YES
2. Select bookmarks/marks to be deletedYES
or
Put a check mark for bookmarks/marks to be deletedl(
)YES
Continue putting a check mark until “
” appears.
Document Display Settings
Data Management
You can set a display format for when the PDF files are displayed from
sites.
ii-mode settingsDoc. display settings
Select a display format.
Displaying Word, Excel, and PowerPoint
Files
You can display the Microsoft Word, Microsoft Excel and Microsoft
PowerPoint files saved to the microSD card. (See page 380)
■Type of displayable documents
Type of document
Extension
Excel
XLS
Word
DOC
PowerPoint
PPT
mData boxDocument viewerSelect a folder
Select a file.
See page 382 for the
Function menu of the
Folder list.
Folder list
Document list
■Operations when displaying a document file
See page 395 for when you operate from the Function menu.
Operation
394
Key operation
Operation
Key operation
Upper scroll
Zo
Zoom out
Lower scroll
Xo
Fit page
Left scroll
Co
Next page
c9>
Right scroll
m7<
Vo
Previous page
Call up the key
operation guide
Search
Search next
Zoom in
Search previous
Information
Go to
You can move to another page or sheet of the file.
Select the page or the sheet you want to move to.
If you select “Specified page” for the Microsoft Word file or
Microsoft PowerPoint file, enter the page number you want to
move to in the page number field; then you can move to the
specified page.
Search
You can display the screen in which the specified character string
is contained. The point that matches the specified character string
is highlighted.
SearchSelect the search string field
Enter a character string to be searched for.
You can enter up to 8 full-pitch/16 half-pitch characters.
Some files might not be correctly displayed.
Function Menu of the Document List
See page 347.
File info
You can display the name and type of files.
Attach to mail
You can compose an i-mode mail message with the document
file attached.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Copy
See page 348.
Move
See page 348.
Delete this
See page 348.
Delete all
See page 348.
Multiple-choice
See page 348.
Memory info
You can display the used memory space (estimate).
Put a check mark for search conditions to be specified
l(
If you select “Search prev.” or “Search next”, you can continue
to search under the same condition.
Zoom & page
You can set whether to display the zoom magnification and page
number for displaying the file.
Display or Not display
Scroll bar
You can set whether to display the scroll bar for displaying the file.
Display or Not display
Rotate view
90° to right or 90° to left
Document info
You can display the name and type of files.
Function Menu while Document File is Displayed
Zoom in
Zoom out
View types
You can zoom in the file.
You can zoom in the file up to 1,000%.
You can zoom out the file.
You can zoom out the file up to 8%.
You can change display format of the file.
Select a display format.
If you select “User defined”, enter the magnification value in the
magnification specification field; then you can display the page
at the specified magnification.
The magnification you can specify by “User defined” is 8
through 1,000%.
Information
The search conditions work as shown below:
Whole words only: Searches for character strings that completely match by unit of a
word.
Match case: Identifies between uppercase and lowercase for search.
Search in this page (Excel file only): Searches in the currently displayed page only.
Search in this file (Excel file only): Searches in the whole file.
395
Data Management
Edit title
Printing Saved Images
Select a Method to Print the Images Saved in the
microSD Card
Displaying Still Images or Movies/i-motion
on TV
DPOF is the format for recording the print information about the still
image you shot with a digital camera. You can input the information into
the still image on the microSD card about whether to print it out and how
many copies you print out. You can take the card to DPE service shops
or use a DPOF compatible printer to print photos as you specify.
Data Management
Still image in play/Still image listi(
DPOF settingPrint
Enter the number of copies to be printed out.
Enter “01” through “99” in two digits.
To cancel printing the selected still image, select “Print OFF”. To cancel printing
all still images, select “All print OFF”.
When you connect the FOMA terminal to a TV using the Flat-plug AV
Output Cable P01 (option), you can display still images, movies/i-motion
movies, and images during a videophone call, video from 1Seg and from
i-αppli on the TV. You cannot display any other images.
Connect FOMA Terminal to TV
Open the cover of the Earphone-Microphone/AV output terminal on the
FOMA terminal and connect the Flat-plug AV Output Cable to it. Then
connect the Flat-plug AV Output Cable to the video/audio input terminal
on the TV.
Video Audio L Audio R
(yellow) (white) (red)
Information
Video/Audio input
terminal
The classification icon of the images set with DPOF Setting is “
”.
You can set DPOF Setting for up to 999 image files.
You cannot set DPOF Setting for the image in excess of 2 Mbytes or 5M (1944 x
2592) size.
If unused space on the microSD card is not enough, DPOF Setting might not be set.
(The icon and Picture Information, however, indicate DPOF is set.)
Still images shot by P-01A also support PRINT Image MatchingⅢ.
(yellow) (white)
(red)
Flat-plug AV Output Cable
Earphone-Microphone/AV output terminal
Information
You can connect to the devices other than TV sets for output.
When connecting the Flat-plug AV Output Cable, make sure that you firmly insert it.
Do not pull the cable forcibly, twist it by the plug, or apply an excessive force.
396
Information
Before connecting or disconnecting the Flat-plug AV Output Cable to and from the
device such as a TV, turn off the sound volume of the connected device.
To pull the plug out, take hold of the plug and then pull it out softly.
Display Still Images on TV
Play back a still image while the Flat-plug AV Output
Cable is connected
or
connect the Flat-plug AV Output Cable while a still
image is being played back.
Information
AV output is not available in the following cases:
・When playing back a still image from any other than the Still Image list or icon
pasted to the desktop
・When playing back a still image from any other than the “i-mode” folder, “Camera”
folder, user folders, “Picture” folder (microSD), and “Image Box” folder (microSD)
・When displaying a still image whose acquired source icon is “
” or “
”, and
whose “File restriction” is “File restricted”
・When playing back a Chara-den picture you shot a Chara-den model whose “Rec.
file restriction” is “File restricted”
・When playing back a still image in the actual size or by slide show
・When playing back a Flash movie
Display Movies/i-motion on TV
Play back a movie/i-motion movie while the Flat-plug AV
Output Cable is connected
or
connect the Flat-plug AV Output Cable while a movie/
i-motion movie is being played back.
Press m(
) to switch the display size.
See page 353 for how to play back movies/i-motion
movies and how to operate during playback.
To cancel AV output, pull the Flat-plug AV Output Cable
off of the FOMA terminal. When another function starts
up, AV output is canceled as well.
Data Management
Press m(
) to switch the display size.
You can press Oo(
) to start a slide show. You
can press Oo(
) again to stop it.
You can press No to display a previous or next still
image.
Each time you press l(
), you can rotate the
still image clockwise by 90 degrees.
See page 346 for how to display still images.
To cancel AV output, pull the Flat-plug AV Output Cable
off of the FOMA terminal. When the playback ends, or
when another function starts up, AV output is canceled
as well.
Information
When a still image is larger than the VGA (480 x 640) size, it is reduced to VGA (480
x 640) or smaller with its proportional ratio retained for displaying on the TV.
On some TVs, still images may not be displayed correctly when the display size is
switched.
Information
AV output is not available in the following cases:
・When the image is played back from any other than the Movie list or icon pasted to
the desktop
・When playing back a movie/i-motion movie whose acquired source icon is “
” or
“
”, and whose “File restriction” is “File restricted”
・When playing back a Chara-den movie you shot a Chara-den model whose “Rec.
file restriction” is “File restricted”
・When a movie/i-motion movie in the “Pre-installed” folder, or “Movable contents”
folder (microSD) is played back
397
Information
On some TVs, movies/i-motion movies may not be displayed correctly when the
display size is switched.
Display Video from i-αppli
Start an i-αppli program while the Flat-plug AV Output
Cable is connected
or
connect the Flat-plug AV Output Cable while an i-αppli
program is running.
To cancel AV output, pull the Flat-plug AV Output Cable off of the FOMA terminal.
When an i-αppli ends, or when another function starts up, AV output is canceled.
Data Management
Information
AV output still continues even if you close the FOMA terminal. However, AV output is
not available during pause in Power Saver Mode.
AV output of i-αppli programs is unavailable during Play Background.
AV output is unavailable for i-motion movies displayed while an i-αppli program is running.
Display Images during a Videophone Call on TV
Make a videophone call while the Flat-plug AV Output
Cable is connected
or
connect the Flat-plug AV Output Cable during a
videophone call.
“
” appears during AV output.
To cancel AV output, pull the Flat-plug AV Output Cable
off of the FOMA terminal. When the videophone call
ends, or another function starts up, AV output is
canceled as well.
398
Information
AV output is unavailable for images under Remote Monitoring.
The sensitivity of the microphone is improved during AV output.
“
” (Hands-free icon) does not appear during AV output. However, the voice is
output from the connected device. You cannot switch to Hands-free.
Display Video from 1Seg
At 1Seg start-up
Released
Watch a 1Seg program while the Flat-plug AV Output
Cable is connected
or
connect the Flat-plug AV Output Cable while watching a
1Seg program.
To switch to AV output while the Flat-plug AV Output
Cable is connected, select “Settings” → “Display/
operation” and select “AV output” from the Function
menu.
To cancel AV output, pull the Flat-plug AV Output Cable
off of the FOMA terminal or select “Settings” →
“Display/operation” and select “AV output” again from
the Function menu. When watching 1Seg programs
ends, or when another function starts up, AV output is
canceled.
Information
When “TV sound while closed” is set to “ON”, AV output still continues even if you
close the FOMA terminal.
The caption and data broadcasting are not displayed on TV.
AV output is unavailable during recording.
AV output is unavailable for video or still images recorded by 1Seg.
The sound during AV output is output from a connected device, so adjusting the
sound volume of the FOMA terminal cannot change the output sound volume.
Convenient Functions
Multiaccess . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multitask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Informing You of an Incoming Call/Mail Message by Voice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning Power On/Off Automatically at a Specified Time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Calendar to Manage Schedule . . . . . . . . . . .
Using ToDo to Manage Schedule . . . . . . . . . . . . . . . . .
Setting Operating Conditions of Alarm . . . . .
Using Your Original Menu . . . . . . . . . .
Storing Your Name, Mail Address and Other Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording Voice during a Call or Standby as Voice Memo
. . . . . . . . . . . . . . .
Recording Images during a Videophone Call as a Movie Memo
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
400
401
402
404
404
407
411
413
413
414
415
415
Checking Call Duration/Charge . . . . . . . . . . . . . . . 416
Resetting Total Duration/Total Cost
. . . . . . . . . . . . . . . . . . . . . . . . . . . 416
Setting Call Cost Limit. . . . . . . . . . . . . . . . . 417
Using Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 417
Making Text Memos . . . . . . . . . . . . . . . . . . . . . . . . 417
Copying/Deleting Data Items between FOMA Terminal and UIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
How to Use Flat-plug Earphone/Microphone with Switch
. . . . . . . . . . . . 419
Selecting a Microphone for Use when an Earphone is Connected
. . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Selecting Other Party to Call for when an Earphone is Connected
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
Receiving a Call Automatically when an Earphone is Connected
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
Using Bluetooth Function . . . . . . . . . . . 421
399
Receive a Voice Call during i-mode or during Packet
Communication
Multiaccess
Multiaccess enables you to simultaneously connect to three lines; a
voice call, packet communication, and SMS.
To switch the displays, press and hold x for at least one second; or
press x to switch from TASK MENU. (See page 402)
See page 504 for details on combination of Multiaccess.
Voice call
You can receive a voice call without disconnecting i-mode or packet
communication.
To return to the display for i-mode or packet communication without answering
the call, press and hold x for at least one second. Press and hold x for at
least one second again to return to the Call Receiving display.
The caller hears not a message but a ringback tone.
Single line
i-mode, i-αppli, i-mode mail, packet communication via PC
Single line
SMS
Single line
The Call Receiving display appears when a call comes in
Press d to answer the call.
Use Communication during Voice Call
Convenient Functions
Information
You are charged a fee for each line during Multiaccess.
You can use i-mode, send/receive i-mode mail, etc. without
disconnecting a voice call.
Make a Voice Call during i-mode or during Packet
Communication
You can make a voice call without disconnecting i-mode or packet
communication.
During i-mode or packet communicationx
Stand-by display
Make a call.
If you make a videophone call during i-mode, i-mode is disconnected and the
videophone call is made.
After you finish the videophone call, the i-mode display returns.
400
During a voice callxm(
Select an icon to operate each function.
Information
When a mail message or Message R/F comes in during a call, the ring tone does not
sound and incoming illumination does not flicker regardless of the “Receiving display”
setting.
A ring tone sounds and the Receiving Result display appears when “Receiving
display” is set to “Alarm preferred” except for the following cases:
･During a call
･While the camera is activated
･While you are watching a 1Seg program (when “Mail ticker display” is set to other
than “OFF”)
･When an i-αppli program set for the Stand-by display is running as an ordinary
i-αppli program
When you perform packet communication via a personal computer, make a call-out
operation from the personal computer during a voice call.
Multitask
The FOMA terminal supports “Multitask” that enables you to use up to
three functions such as menu functions (see page 34) at the same time.
By combining Multiaccess and Multitask, you can use following
functions simultaneously (see page 505 for the combination patterns of
Multitask):
■Mail group
i-mode mail and SMS functions
Start Another Function
When a function is runningx
m(
Start another function.
For the icon of the group in use, “ ” or another mark is
added.
When a single function is used, “
” is displayed.
When multiple functions are used, “
” is displayed.
■i-mode group
Menu functions inside “i-mode group” on Main Menu
When a function in the
Tool group is running
■Setting group
Menu functions inside “Setting group” on Main Menu
If another menu function in the same group has already been
called up
■Other functions which do not belong to the groups
Voice call, videophone call, 64K data communication, etc.
Mail group
The confirmation display appears asking whether to switch the functions. Select “YES” to
close the current menu function and the new menu function will be called up.
i-mode group
Setting group
Tool group
Information
You are charged a call fee even when you are running other functions during a call.
If a call comes in while another function is working, the call might not be received
correctly. In that case, “Record message” or “Call Forwarding Service” may start in a
shorter time than the ring time specified for them.
If you use Multitask to switch functions while executing another function whose load of
processing is high, delay may occur in displaying operation, and so on.
401
Convenient Functions
■Tool group
Menu functions inside “Tool group” on Main Menu
Switch Displays
When multiple menu functions are working, you can switch the displays
by pressing and holding x for at least one second. The display
switches from the latest one in chronological order.
To display the menu list for functions in use
Press x.
You can switch displays by selecting a function from the list.
You can show the Stand-by display by pressing c(
or selecting “Stand-by display”.
By pressing m(
) or selecting “Open Menu”, you can
show Main Menu in Normal Style, Horizontal Open Menu in
Horizontal Open Style.
Convenient Functions
Information
Even if you press -x to switch the displays, neither menu function in use is closed
nor the call is disconnected. Also, even when you switch the Character Entry display
(see page 430) to another menu and use that menu for editing text, you can continue
editing the previous text if you switch tasks.
When another function is not working and you press and hold -x for at least one
second from the vertical Stand-by display, the setting display for “Select networks”
appears.
Exit a Function
To close a menu function, press h with the menu function displayed.
Press i(
) from TASK MENU, and select “YES” to close all menu functions
and to return to the Stand-by display.
When you press h from the Stand-by display during Play Background, the
confirmation display appears asking whether to end the menu function.
402
Informing You of an Incoming Call/Mail
Message by Voice
You can set to be notified of incoming calls by voice instead of a ring
tone, or to have the mail contents automatically read aloud. Further, the
voice guidance tells you how to operate Voice Dial. This function is
available in Japanese only.
Read Aloud Settings
mSet./ServiceOther settingsVoice settings
Read aloud settingsON or OFFPut a check mark
for items to be read aloudl(
Voice dial . . . . . . . . . . . . . . . Instructs you through the Voice Dial operation by
voice guidance.
Incoming call . . . . . . . . . . . . Notifies you of the caller information by voice while a
voice call is coming in.
Videophone incoming . . . . Notifies you of the caller information by voice while a
videophone call is coming in.
Number of mails/msgs. . . . Notifies you of the number of mail messages/
Messages R/F by voice at reception. The setting of
“Mail/Msg. ring time” is invalid.
Mail list . . . . . . . . . . . . . . . . . Reads aloud the sender/destination address and
subject on the Inbox/Outbox list.
Displaying mail . . . . . . . . . . Reads aloud the sender/destination address,
subject, and text on the detailed mail display.
However, the voice guidance is not provided when a
melody is automatically played back while “Auto
melody play” is set to “ON”.
Does not read aloud the text on the Decome-Anime
Playback display.
Send mail preview. . . . . . . . Reads aloud the destination address and text when
previewed.
You can stop the voice guidance for a mail message midway by pressing any
key. However, it continues if you scroll the display.
The voice guidance for a mail message is not provided in the following cases:
･ While the audio from a 1Seg program is played back
･ When you display a mail message in Multiwindow.
･ When you display a mail message stored on the microSD card.
Read Aloud Volume
mSet./ServiceOther settingsVoice settings
Read aloud volumeUse Boto adjust the volume.
Read Aloud Speed
mSet./ServiceOther settingsVoice settings
Read aloud speedSelect a speed.
Read Aloud Valid Setting
You can set the voice guidance to be provided only when the Flat-plug
Earphone/Microphone with Switch (option) is connected.
mSet./ServiceOther settingsVoice settings
Read aloud valid set.Normal or Earphone
Normal. . . . . .Always provides the voice guidance.
Earphone. . . .Provides the voice guidance only when the Flat-plug Earphone/
Microphone with Switch is connected.
Information
Read Aloud Output
You can set whether to play back the voice guidance from the speaker or
hear it from the earpiece.
mSet./ServiceOther settingsVoice settings
Read aloud outputSpeaker or Earpiece
Information
The voice guidance of “Incoming call”, “Videophone incoming” and “Number of mails/
msgs.” is output from the speaker even when this function is set to “Earpiece”.
When the Flat-plug Earphone/Microphone with Switch (option) is connected, the voice
guidance is output according to the setting of “Headset usage setting”. However,
when “Read aloud output” is set to “Earpiece” and “Headset usage setting” is set to
“Headset and speaker”, the voice guidance is output from the earphone except for
“Incoming call”, “Videophone incoming” and “Number of mails/msgs.”.
From a Hands-free device, the voice guidance for “Incoming call” and “Videophone
incoming” only might be provided.
You might not be able to stop the voice guidance even by pressing the switch of the
Flat-plug Earphone/Microphone with Switch (option).
Rules of Voice Guidance
The contents of mail messages and others are read aloud generally according to the
rules below:
They may not be read aloud as specified in the following rules depending on the
function you use:
A numeric string up to 16 digits is read aloud as a number. When a numeric string
begins with “0” or it is identified as a URL or mail address, it is read aloud digit by digit.
When numerals are separated by “/” or “.”, they are read aloud as dates.
“1日” is differently read aloud for the meaning of the date (1st date of a month) and for others.
The kanji characters of dates other than “1日” are always read aloud as for the dates.
When numerals are separated by “:”, they are read aloud as time.
“-”, “(” and “)” contained in a phone number or zip code are not read aloud, and
numbers only are read aloud.
When a numeric string begins with “￥”, “＄”, “￠”, or “￡”, it is read aloud as the meaning of
money amount. When “,” is used, the numeric string before “,” is identified as money amount
and that after “,” is identified as a number, unless it is separated by every three digits.
“(Numeral) 分の (numeral)” is read as a fraction.
Alphabetical letters are read aloud according to the voice guidance dictionary
pre-installed in the FOMA terminal.
When a word consists of four or more letters and can be read in romaji-reading, it is
read aloud in romaji-reading.
The alphabetical letters after a numeral might be read aloud as a unit.
“M”, “T”, “S”, and “H” before a date are converted to the Japanese era name and then
read aloud.
Alphabetical letters other than above are read aloud in alphabetical reading.
403
Convenient Functions
When you set to “Earphone”, the voice guidance continues even if you remove the
Flat-plug Earphone/Microphone with Switch during the voice guidance. When a call
comes in while the Flat-plug Earphone/Microphone with Switch is removed, the voice
guidance does not start even if you connect it.
Convenient Functions
Symbols are read aloud according to the Symbol list. When the same symbol
continues three times or more, that symbol is not read aloud.
“ヘンシン” is read aloud for the following character strings:
“Re:”, “Re>”, “Re2:”, “Re2>” and “Re2*”
“テンソー ” is read aloud for the following character strings:
“Fw:”, “Fw>”, “Fw2:”, “Fw2>”, “Fw2*”, “Fwd:”, “Fwd>”, “Fwd2:”, “Fwd2>” and “Fwd2*”
When symbols for “Reply” or “Forward” are consecutively repeated, they are read
aloud only once.
Pictographs are read aloud according to the Pictograph list.
Smileys are read aloud according to the voice guidance dictionary pre-installed in the
FOMA terminal. When they are identified as a URL or mail address, however, they are
read aloud as symbols.
Texts are read aloud separated by punctuation marks and symbols such as “!”, or “?”.
When the kanji character that expresses the day of the week is put between “(” and “)”,
it is read aloud as the day of the week.
Words might not be correctly read aloud depending on the context of the text
(especially place names and proper nouns).
Information
When you set “Auto power OFF” to the same time of an alarm, schedule alarm, or
others, those alarms preferentially work.
Even when you set “Auto power OFF”, the power does not turn off at the specified
time if other than the Stand-by display is displayed. The power turns off after the
function in working is finished. When you set a Flash movie as the Stand-by display,
the power might not be turned off while the Flash movie is moving.
Turn off the FOMA terminal after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
+m-4-4
Using Alarm
You can set Alarm to alert you at the specified time with an alarm tone,
animation and illumination. You can store up to 12 alarms.
mStationeryAlarmHighlight an
alarm and press l(
Do the following operations.
Turning Power On/Off Automatically at a
Specified Time
mSet./ServiceClockAuto power ON/OFF
Auto power ON or Auto power OFFSelect an item.
Alarm
You can set whether to validate or invalidate the alarm.
ON or OFF
Time
OFF . . . . . . Does not set Auto Power ON/OFF. The setting is completed.
1 time . . . . Sets to turn on/off the power automatically at the specified time only
once.
Daily . . . . . Sets to turn on/off the power automatically at a specified time everyday
repeatedly.
Enter the time for sounding the alarm.
You cannot set the same time as the time set for the stored
alarm.
Repeat
Select a type of repeat.
If you select “Select day”, put a check mark for days of the week
to be set and press l(
).
Enter a time.
Tone
Select a type of alarm toneSelect a folder
Select an alarm tone.
Information
When you set “Auto power ON” and “Auto power OFF” to the same time, and the
specified time arrives, the FOMA terminal will turn on if it is turned off, and the FOMA
terminal will turn off, if it is turned on.
404
Volume
Snooze
Use Bo to adjust the volume.
If you set “Step”, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
You can set whether to activate Snooze. If you set to “OFF”, set
the duration that the alarm tone is to continue sounding.
ON or OFFEnter a ring time (minutes).
You can enter from “01” through “10” in two digits.
See page 406 for how Snooze works.
Auto power ON You can set whether to turn on the power automatically to make
an alarm sound when the alarm time arrives during power off.
ON or OFF
Prefer manner
mode
Press l(
).
The following icons appear on the display depending on the setting:
: Repeats daily.
: Repeats on the specified day of the week.
You can invalidate the stored alarm.
YES
You can invalidate also by pressing Oo(
Release all
You can invalidate all the stored alarm.
YES
).
Information
If the alarm tone sounds during a call, press any key to stop it. Once again press any
key to end the alarm including Snooze. If the other party on the phone hangs up, an
alarm including Snooze ends.
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
If any of the following events occurs in Snooze state, Snooze is released:
･When you receive a voice call, videophone call, or PushTalk call
･When you receive a mail message or Message R/F while “Receiving display” is set
to “Alarm preferred”
･When you receive a location provision request while “Location request menu” or the
setting by service is set to the settings that permits location provision.
･When an alarm of “Schedule”, “ToDo”, “TV timer” or “Timer recording” sounds
When you set the power to automatically turn on and an alarm to sound, the default
alarm tone sounds if the alarm with the UIM security is selected.
Turn off the FOMA terminal after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for “Alarm”, “Schedule”, and “ToDo”
Function Menu while Alarm is Displayed
The icon appears on the desktop.
Edit
Go to step 1 of “Using Alarm” on page 404.
“
Detail
You can display the stored alarm contents.
Set this
You can validate the stored alarm.
YES
You can validate also by pressing Oo(
“
”. . . . . Displayed when an alarm is set for tomorrow or onward only.
If you set “Alarm” of a schedule event/ToDo item to “OFF”, the icon is not displayed.
Set all
You can validate all the stored alarm.
YES
”. . . . . Displayed when an alarm is set for today (except the setting for past time).
).
405
Convenient Functions
You can set the alarm tone which sounds at the specified time
during Manner Mode.
ON or OFF
ON . . . . . Sounds at the same volume as set for “Alarm volume”
on page 111.
OFF . . . . Sounds at the volume set for this function.
Release this
Convenient Functions
When the time specified for “Alarm”, “Schedule” or “ToDo”
comes
The alarm sounds for about five minutes (in the case of “Alarm”, the alarm sounds for
specified time), and illumination lights. The vibrator works as you set for “Phone” of
“Vibrator”. The alarm message and an animation or i-motion movie linking to the
selected icon appear on the display.
If you set “Snooze” of “Alarm” to “ON”
The alarm sounds for about one minute at an interval of five minutes, up to six times,
until Snooze is released by pressing h.
During a call
The alarm sounds from the earpiece three times repeatedly.
During operations
The FOMA terminal works according to the setting of “Alarm setting”. (See page 413)
When you set an alarm to the time of another alarm
The alarm sounds in the priority order of “Alarm”→“Timer recording”→“ToDo”→
“Schedule”→“TV timer”. A missed schedule event or ToDo is notified by the “Missed
alarm” icon.
When the power is turned off
When “Auto power ON” is set to “ON”, the power automatically turns on to make an
alarm notification sound. When the auto-power setting is set to “OFF”, an alarm does
not sound with the power stayed off. Even after turning the power on, the “Missed
alarm” icon is not displayed.
The alarm does not sound.
The “Missed alarm” icon is not displayed even after turning the power on.
In Manner Mode
The vibrator and illumination light notify you. For Schedule/ToDo, a message is also
displayed. The alarm sounds at the volume set for Manner Mode. (See page 111)
During Lock All, Personal Data Lock or Omakase Lock
The alarm does not sound.
After releasing each lock, the “Missed alarm” icon is displayed to inform you of the
missed alarm. Further, if the power is turned off, the power does not turn on and the
“Missed alarm” icon does not appear even after releasing each lock.
406
While operating the microSD card, during infrared communication, or during iC
communication
The alarm does not sound.
After each function is finished, the “Missed alarm” icon is displayed.
While resetting settings
The alarm does not sound.
The “Missed alarm” icon does not appear even after resetting settings is completed.
The alarm sounds.
While updating a software program
The alarm does not sound.
The “Missed alarm” icon appears after software updating is completed.
Information
If you set “Alarm setting” to “Alarm preferred” and the alarm time has come when you
are dialing, the alarm sounds after calling up the other party. If the alarm time has
come when receiving a call, the alarm sounds after starting communication.
You might not be able to set some i-motion movies or Chaku-uta Full® music files for
the alarm.
Some i-motion movies set for the alarm might be played back only with sound at the
specified time.
The Chaku-uta Full® music file set for the alarm is played back only with sound at the
specified time.
The illumination for when you play back a demo to select an alarm tone might differ
from for when you are notified by an alarm.
To clear alarm tone/alarm message, and animation/i-motion
movie from the display
Press any key to stop the alarm tone but the animation/i-motion movie changes to a still
image and the alarm message remains displayed. Press any key again (press h if you
set “Snooze” of “Alarm” to “ON”) to clear the display. However, you cannot clear the
alarm message for the schedule event or ToDo item by pressing a side key when the
FOMA terminal is closed. When a call comes in, the alarm stops sounding.
When multiple alarm messages exist, you can swith display by pressing i(
or l(
) after stopping the alarm tone.
When “Alarm” did not work
Whole day
You can set whole day schedule without entering starting and
ending date/time.
OFF or ON
If you set to “ON”, the alarm sounds at 12 a.m.
Date (from)
Enter the date and time for starting the schedule.
Date (to)
Enter the date and time for ending the schedule.
Repeat
Select a type of repeat.
If you select “Select day”, put a check mark for days of the week
to be set and press l(
).
“Missed alarm” icon is displayed on the desktop. You can check that icon for the contents
of the missed alarm (Missed alarm information).
The latest missed alarm information that could not be notified is displayed.
+m-4-5
Using Calendar to Manage Schedule
You can display the calendar by month to check the stored schedule
events.
You can display or store from January 1, 2000 through December 31,
2037.
Set repeat time.
Unrestricted or XX times.
Enter the repeat time.
Enter two digits from “02” through “99”.
The item set with repetition is counted as one item.
See page 406 for how alarm works.
Store Schedule Events
Alarm
mStationerySchedulei(
Do the following operations.
Edit subject
)New
Place
Enter the date and time to be alerted.
Select an icon.
When the alarm tone alerts you, the animation corresponding to
the selected icon is displayed.
Enter the subject of the schedule event.
You can enter up to 25 full-pitch/50 half-pitch characters.
A subject corresponding to the selected icon is entered in
advance.
Enter a place.
You can enter up to 25 full-pitch/50 half-pitch characters.
Select an alarm method.
ON . . . . . . . . . . . Alerts you at the time of the starting date/time of
the schedule event. The setting for alarm
notification is completed.
ON/Set time . . . Alerts you at the time set as the prenotification.
OFF . . . . . . . . . . Does not alert. The setting for alarm notification
is completed.
Tone
Select a type of alarm toneSelect a folder
Select an alarm tone.
Details
Enter details.
You can enter up to 300 full-pitch/600 half-pitch characters.
Press l(
).
Information
If you enter a date on or after 29th in “Date (from)” and set “Repeat” to “Monthly” or
“Yearly”, the schedule event is set on the last day of the month when the month does
not have the specified date.
407
Convenient Functions
When the specified date and time come, an alarm tone, an illumination,
subject of the schedule event and an animation corresponding to the set
icon notify you of the schedule event.
You can store up to 2,500 schedule events.
Information
For the schedule event stored as secret data, an alarm message is not displayed
when the alarm sounds in ordinary mode (other than “Secret mode” and “Secret data
only”). An animation for secret data appears.
During standby, the alarm tone sounds at the level set for “Phone” of “Ring volume”.
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
Check Schedule Events
You can check the details of schedule events or holidays. You can also
check birthdays stored from the Phonebook.
mStationerySchedule
Select a date.
Store Holidays
You can store up to 100 holidays. However, you cannot store multiple
holidays for the same date.
Convenient Functions
The Calendar display appears.
If you press m(
) or c(
), the calendar
for the pervious or next month is displayed.
If you receive a weather forecast for week from
i-concier, information of them are also displayed.
mStationerySchedulei(
)Settings
Edit holidayNewDo the following operations.
Date setting
Select an item.
Yearly [fixed date]. . . . Enter the date.
Yearly [- - , -] . . . . . . . . Enter the month, week, and day of the
week.
Holiday name
Enter the holiday name.
You can enter up to 10 full-pitch/20 half-pitch characters.
Press l(
).
Calendar display
The Schedule list and birthday list for the selected date
are displayed.
Schedule list
408
3
Select a schedule event or birthday.
No. of schedules
When you select a birthday and select “Sending mail”,
you can compose to the first mail address in the
selected birthday person’s Phonebook entry. (See “Mail
To Function” on page 207)
When you select “Making call”, you can make voice
calls and so on. (See “Phone To/AV Phone To
Function” on page 206)
You can display the number of schedule events, holidays, and
birthdays. In Secret Mode or Secret Data Only, you can display
the number of the schedule events stored as secret.
Settings
Kisekae setting You can shange the design of the Calendar display.
Select a pattern.
Customize
holiday
Detailed Schedule
display
Information
Edit holiday
New
Go to step 1 of “Store Holidays” on page 408.
Edit
Go to step 1 of “Store Holidays” on page 408.
Delete this
YES
Reset holiday You can restore the holidays to its default.
YES
Delete
Function Menu of the Calendar Display
New
Delete past
You can delete the schedule events stored for up to a preceding
day of the selected day.
YES
Delete all
You can delete all the schedule events.While schedule events
are displayed by Filter function, only the displayed schedule
events are deleted.
Enter your Terminal Security CodeYES
Go to step 1 on page 407.
Search/Filter
To specified date Enter the date.
Filter
You can list up schedule events by the specified icon.
Select an icon to be listedl(
Release Filter
You can release filter and display all the schedule events.
Connect to Center
See page 140.
Add desktop icon
See page 31.
Ir/
transmission
Send all Ir data
See page 387.
All
transmission
See page 389.
Information
Days are displayed in the default color during Lock All, Omakase Lock, and Personal
Data Lock.
The schedule events downloaded from i-concier are not deleted.
409
Convenient Functions
Holidays stored at purchase on the calendar are conformance with “Law on National
Holidays and the partially amended version of the Elder Law” (up to No.43, 2005).
Spring Equinox Day and Autumn Equinox Day are announced on the official gazette
of February 1 in the previous year, therefore, they may differ from the days on the
calendar. (As of October 2008)
You can specify the color for the day of the week.
Select a day of the weekDefault, Red, or Blue
The display color of holidays has priority over this setting.
To specified date See page 409.
Function Menu of the Schedule List/Detailed Schedule
Display
New
Go to step 1 on page 407.
Convenient Functions
Copy
See page 409.
Release filter
See page 409.
Edit holiday
Edit
Edit
Filter
Go to step 1 on page 407.
You can edit also by pressing m(
).
If you edit a schedule event set with repetition, the confirmation
display appears asking whether to edit only a schedule event of
the present day. If you select “YES”, “Repeat” on the edit
display become “1 time” (OFF), and it is stored as a new
schedule event. If you select “NO”, it is overwritten.
You can copy the schedule event and store it for another date.
Enter the date and time you are pasting to.
Go to step 1 on page 407.
If you copy a schedule event set with repetition, “Repeat” on the
edit display become “1 time” (OFF).
New
Go to step 1 of “Store Holidays” on page 408.
Edit
Go to step 1 of “Store Holidays” on page 408.
Delete this
YES
Reset holiday
See page 409.
Add desktop icon
Ir/
Send Ir data
Send
See page 386.
Send all
See page 387.
transmission
Compose message
Compose
message
Attach to mail
You can compose an i-mode mail message whose text contains
the start date/time and details of the schedule event.
Go to step 2 on page 146.
You can attach the schedule event to an i-mode mail message to
send.
Go to step 2 on page 146.
You can attach it to an i-mode mail message also by pressing
c(
) from the Schedule List or by pressing l(
from the detailed Schedule display.
Move/copy
Copy to microSD See page 372.
Connect to
Center
Search/Filter
410
See page 31.
transmission
See page 140.
Send
See page 388.
Send all
See page 389.
Delete
Delete this
YES
If you delete a schedule event set for repeat, the all data items
set for repeat will be deleted.
Delete select
Put a check mark for schedule events to be deleted
l(
)YES
Delete past
See page 409.
Set secret/
Release secret
You can have the schedule event set to or release from secret.
YES
When you select “Set secret” in ordinary mode (not in “Secret
mode” or “Secret data only”), enter your Terminal Security
Code.
Information
Function Menu of the i-schedule List/Detailed i-schedule
Display
≥The schedule events downloaded from i-concier are not deleted.
Schedule list
Displaying i-schedule
You can display contents of the schedule downloaded by i-concier.
Delete this
[i-schedule list
only]
1OK
The i-schedule list is displayed.
Delete select
[i-schedule list
only]
1Put a check mark for i-schedule events to be deleted
1l(
)1OK
Delete all
[i-schedule list
only]
1YES
+m-9-5
Using ToDo to Manage Schedule
≥See page 205 when you select “Search by i-mode”.
You can manage your schedule events in the list and make an alarm tone
sound when the specified time comes.
You can store up to 100 ToDo items to manage your schedule.
≥See page 406 for how alarm works.
Detailed i-schedule
display
m1Stationery1ToDo1l(
1Do the following operations.
≥You can check the stored contents by selecting a stored ToDo item, and you can
edit it by pressing Oo(
).
Edit ToDo
1Enter ToDo contents.
≥You can enter up to 100 full-pitch/200 half-pitch characters.
411
Convenient Functions
Select an i-schedule.
).
Delete
Calendar display/schedule list
1l(
i-schedule list
You can display the i-schedule list.(See page 408)
≥You can display i-schedule list also by pressing l(
Convenient Functions
Due date
Select an item.
Enter date . . . . .Enter the date (due date) directly.
Choose date . . .Select a date (due date) from the calendar.
Check the date and press Oo(
).
No date. . . . . . . .Does not set the date (due date). The alarm
does not work.
Priority
Select a priority.
If you sort the items in due date order, the items for the same
due date are displayed from the higher priority.
Category
Select a category.
Alarm
Select an alarm method.
ON. . . . . . . . . . . .Alerts you at the set time. The setting for alarm
notification is completed.
ON/Set time . . . .Alerts you at the time set as the prenotification.
OFF. . . . . . . . . . .Does not alert you. The setting for alarm
notification is completed.
Change status
The set status icons are displayed on the ToDo list.
Select a status.
The status icons switch from blue to red after the due date.
If you select “Completion”, perform the same operation as in
“Due date” on page 412.
Category display
Select a category.
Select a ToDo item to display the details of it.
Sort/Filter
You can sort ToDo items for display. You can also list them up by
the specified status.
Select the order or state you want to display.
Add desktop icon
See page 31.
Attach to mail
You can attach the ToDo item to an i-mode mail message to
send.
Go to step 2 on page 146.
You can attach it to an i-mode mail message also by pressing
l(
) while checking the stored contents of the ToDo
item.
Send Ir data
See page 386.
Send all Ir data
See page 387.
Enter the date and time to be alerted.
Alarm tone
Press l(
Select a type of alarm toneSelect a folder
Select an alarm tone.
).
transmission
: Priority high
All
: Priority low
If you do not enter the ToDo contents, “
store the ToDo item.
” is not displayed, and you cannot
Copy to microSD
See page 372.
Delete this
YES
Delete select
Put a check mark for ToDo items to be deleted
l(
)YES
Delete completed
You can delete the “Completion” ToDo items.
YES
Delete all
Enter your Terminal Security CodeYES
Function Menu while ToDo Item is Displayed
New
Go to step 1 of “Using ToDo to Manage Schedule” on page 411.
Edit
Go to step 1 of “Using ToDo to Manage Schedule” on page 411.
To edit “Completion date” of the ToDo item with its “Change
status” set to “Completion”, select “
”, and perform the same
operation as in “Due date” on page 412.
412
See page 388.
transmission See page 389.
Information
During standby, the alarm tone sounds at the level set for “Phone” of “Ring volume”.
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
Setting Operating Conditions of Alarm
You can set whether to sound an alarm of “Alarm”, “Schedule”, “ToDo”
and “TV timer”, for when operating another function.
mSet./ServiceClockAlarm setting
Operation preferred or Alarm preferred
Select an icon.
The display for the selected function is displayed.
+m-5-2
Display the Private Menu List
Private menui(
Operation preferred. . . . . Alerts you only during the Stand-by display.
Alarm preferred . . . . . . . . Alerts you even when you are operating the FOMA
terminal or during a call.
Information
When you could not be alerted, the “Missed alarm” icon appears on the desktop.
Private Menu list
You can store frequently used functions in the Private menu. You can
store a total of 12 items from respective functions in Main Menu (see
page 476).
Select a Function from the Private Menu
mm(
Private menu is displayed.
If you have not touched any key for at least 15 seconds,
the Stand-by display returns.
Add to menu
You can store the frequently used function in the Private menu.
Select a function to be stored.
Press No to display the storable functions by main menu item
or sub-menu item. Press Bo to highlight the function you store.
Change BG image
Select a folderSelect an image.
Add desktop icon
See page 31.
Reset menu
You can reset the Private menu to the default.
YES
Release this
YES
Release all
YES
Private menu
413
Convenient Functions
Function Menu of the Private Menu List
Using Your Original Menu
Information
Information
The image you can set is a JPEG or GIF image whose size is Stand-by display (480 x
854) or smaller and up to 300 Kbytes. Perform “Change size” or “Trim away” for other
images to set. However, when you set a GIF animation, the first frame is displayed.
+m-0
Convenient Functions
Storing Your Name, Mail Address and
Other Information
In addition to the phone number (own number) you have signed up, you
can store your personal information such as your name, reading of your
name, phone numbers (up to three), mail addresses (up to three), a postal
address, location information, a birthday, memorandums, and a still
image.
If you change the mail address or register a secret code, change the mail
address in this function as well.
mPhonebookOwn numberl(
Enter your Terminal Security Code.
Perform the operation in
step 2 on page 90 to store
personal information.
You cannot change or
delete own number.
When you store the
location information, select
“From phonebook” to store
it by selecting a Phonebook Own Number display
entry.
If you have already entered your Terminal Security Code by operating another
function such as “Display all data”, the display for entering your Terminal Security
Code does not appear.
Press l(
).
Information
The items other than own number are displayed even if you use another UIM,
because they are stored in the FOMA terminal.
414
The mail address you can change using this function is limited to the mail address
displayed by “Own number”. You cannot change the actual mail address.
Function Menu of the Own Number Display
Edit
Go to step 1 on page 414.
Character size
You can switch character sizes for the Own Number and on the
displays within “Phonebook settings”, etc. (See “Phonebook” on
page 123)
Display all data
You can display all the stored phone numbers and mail
addresses.
Enter your Terminal Security Code.
Use Mo to display each item.
Copy name
You can copy a name.
Copy phone number/ You can copy each item.
Copy mail add./
From the own number display, press Mo to highlight an item to
Copy address/
be copied. The displayed items in the Function menu differ
Copy location info/ depending on the highlighted item.
Copy birthday/
Copy memorandums
Send Ir data
transmission
Copy to microSD
See page 386.
You can send data via infrared communication also by pressing
c(
).
See page 388.
You can send data via iC transmission also by pressing
m(
).
See page 372.
Erase phone number/ You can delete each item.
Erase mail add./
YES
Erase address/
When the display for entering your Terminal Security Code
Delete loc.info/
appears, enter the code.
Erase birthday/
From the own number display, press Mo to highlight an item to
Erase memorandums/ be deleted. The displayed items in the Function menu differ
Delete image
depending on the highlighted item.
Reset
You can reset (delete) all the stored personal data such as phone
numbers or mail addresses except own number.
YES
When the display for entering your Terminal Security Code
appears, enter the code.
+m-5-5
Record Your Voice during Standby
mLifeKitRec. msg/voice memoVoice memo
YES
A beep sounds and recording starts. Speak into the microphone.
To suspend the recording midway, press Oo(
), r or h.
A beep sounds about five seconds before the recording time (for about three
minutes) ends. The beep sounds twice when the recording ends and the former
display returns.
Auto acquire No. B You can check if the 2in1 service is contracted. When it has been
contracted, Number B is stored.
Recording Voice during a Call or Standby
as Voice Memo
See page 72 for playing back/erasing “Voice memo” (during a call) or “Voice memo”.
Record Other Party’s Voice during a Call
During a voice call
>(for at least one second) or l(
).
A beep sounds and recording starts.
To suspend the recording midway, press Oo(
) or r, or press and hold
>(for at least one second).
Press h to end the recording and the call.
A beep sounds about five seconds before the recording time (for about three
minutes) ends.
The beep sounds twice when the recording ends and the “Talking” display
returns.
Information
If you record a voice memo when either “Voice memo” (during a call) or “Voice memo”
has already been saved, the old one is overwritten regardless of whether you have
played back or not.
You cannot record a voice memo while operating each item in the Function menu.
Recording Images during a Videophone
Call as a Movie Memo
During a videophone call, you can record the receiving images along
with voice.
You can record up to five items for about 20 seconds per item.
See page 73 for playing back/erasing “Movie memo”.
During a videophone call>(for at least one second)
A beep sounds and recording starts. “
” is displayed during recording.
A still image specified by “Movie memo” of “Select image” is shown on the other
party’s display.
To suspend the recording midway, press Oo(
) or press and hold >(for
at least one second).
Press h to end the recording and the call.
A beep sounds about 5 seconds before the recording time (for about 20 seconds)
ends. The beep sounds twice when the recording ends and the “Talking” display
returns.
Information
If you record a movie memo when five movie memos have already been recorded,
the oldest movie memo is overwritten regardless of whether you have played it back
or not.
415
Convenient Functions
Two types of Voice Memo are available; one is “Voice memo” (during a
call) for recording the other party’s voice during a call and the other is
“Record voice memo” for recording your own voice during standby.
You can record either one of “Voice memo” (during a call) or “Voice
memo” for about three minutes.
Information
The recording is suspended when a call comes in, when an alarm for “Alarm”,
“Schedule”, “ToDo”, “TV timer”, or “Timer recording” sounds, or when you switch the
displays by Multitask.
Total calls
Displays the call cost from the time Reset Total Cost was executed to the current
call.
Calls reset
Displays the date and time when Reset Total Duration was executed last time.
Cost reset
Displays the date and time when Reset Total Cost was executed last time.
Information
You cannot record a movie memo while operating each item in the Function menu.
+m-6-1
Checking Call Duration/Charge
Convenient Functions
You can confirm the last and accumulated call duration and cost for
voice calls and videophone calls.
Displayed call duration and cost are for reference and might differ from the actual ones.
In addition, the consumption tax is not included in the call cost.
Both the voice call duration and digital communications duration (videophone call
duration + 64K data communication duration) are displayed and both incoming and
outgoing calls are included in the duration.
The call cost is for the outgoing calls only. However, “¥0” or “¥” is displayed for toll
free calls such as Free Dial or for Directory Assistance Service (104), etc.
The call cost is accumulated on the UIM. Therefore, when you replace the UIM, the
charge accumulated on the UIM in use is displayed. (accumulation from December
2004)
You can reset the displayed call duration and call cost.
mSet./ServiceCall time/costCall data
Last call duration
Talk: Displays the call duration of the latest voice call.
Digital Videophone: Displays the call duration of the latest videophone call.
Non-limiting digital: Displays the call duration of the latest 64K data
communication.
Last call cost
Talk: Displays the call cost for the latest voice call.
Digital Videophone: Displays the call cost for the latest videophone call.
Non-limiting digital: Displays the call cost for the latest 64K data communication.
Total calls duration
Talk: Displays the call duration of voice calls from the time Reset Total Duration
was executed to the current time.
Digital: Displays the call duration of videophone calls and 64K data
communication from the time Reset Total Duration was executed to the
current time.
Information
When Last Call Duration exceeds “19 hours 59 minutes 59 seconds”, or Total Calls
Duration exceeds “199 hours 59 minutes 59 seconds”, “0 s” returns to re-count the
time.
If you switch between the voice call and videophone call during a call, the call duration
and call cost are counted respectively for the calls. You are not charged while
“Changing” (see page 53) is displayed.
The duration/charge for PushTalk, i-mode communication and packet communication
are not counted. For how to check the i-mode fee, refer to “Mobile Phone User’s
Guide [i-mode] FOMA version” which is supplied on your i-mode contract.
The charge for Chaku-moji is not counted.
The international call fee for using WORLD CALL is counted. The fees for using other
international call services are not counted.
The duration for ringing and calling is not counted as call duration.
If you turn off the power or remove the UIM, Last Call Duration is reset to “0 s”; and
Last Call Cost is reset to “¥”.
Resetting Total Duration/Total Cost
mSet./ServiceCall time/cost
Reset total cost&dura.
Enter your Terminal Security Code
Do the following operations.
Reset total duration You can reset Last Call Duration and Total Calls Duration to “0 s”.
YES
Reset total cost
416
+m-6-0
You can reset Last Call Cost and Total Calls to “¥0”.
YESEnter the PIN2 code.
See page 126 for PIN2 code.
Setting Call Cost Limit
You can set the call cost limit for Total Calls and can be notified when it is
exceeded. If you set “Auto reset setting” to “ON”, the call cost is reset at
midnight on the 1st of the month and “ ” is deleted.
mSet./ServiceCall time/costNotice call cost
Enter your Terminal Security CodeON or OFF
Enter a max cost.
Using Calculator
You can display the calculator to make the four rules of calculation
(＋, −, ×, ÷). You can display up to 10 digits.
You can set from ¥10 through ¥100,000 in unit of ¥10.
+m-8-5
Select a method to alertON or OFF
Enter the PIN2 code.
See page 126 for PIN2 code.
+Vo
＋
+Zo
×
+Co
−
+Xo
÷
+Oo
＝
+l
Decimal point
+i
-r
“ ” appears. When “Icon + alarm” is set as a notice method and the Stand-by display
returns, the message to the effect that the call cost has exceeded the maximum cost is
displayed, and a warning tone sounds from the speakers.
C (Clear): Clears the numeral you have
entered last.
AC (All clear): Clears all the calculations
you entered.
Information
Clear Max Cost Icon
You can clear “
” displayed by Notice Call Cost.
mSet./ServiceCall time/costCLR max cost icon
Enter your Terminal Security Code.
Information
“ ” is cleared also by executing Reset Total Cost, Reset Settings, or Initialize.
To be re-notified of the set limit after the maximum cost is exceeded, reset Total Calls.
You cannot enter a minus sign while you are performing calculation.
When the calculated result exceeds 10 digits or invalid calculation like “divided by 0” is
performed, “.E” is displayed.
+m-4-2
Making Text Memos
You can store up to 20 text memos.
mStationeryText memoSelect
Enter a text memo.
You can enter up to 256 full-pitch/512 half-pitch characters.
You can check the stored contents by selecting a stored text memo, and you can
edit it by pressing Oo(
).
417
Convenient Functions
When Total Calls has exceeded the max cost
mStationeryCalculator
Follow the operation below to make a
calculation.
Function Menu while Text Memo is Displayed
Edit
Go to step 1 of “Making Text Memos” on page 417.
Compose message You can compose an i-mode mail message containing the
contents of the text memo.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Edit schedule
You can create a schedule event containing the contents of the
text memo.
Go to step 1 on page 407.
Add desktop icon
See page 31.
Send Ir data
See page 386.
Send all Ir data
See page 387.
Convenient Functions
transmission
All
Copying/Deleting Data Items between
FOMA Terminal and UIM
You can exchange the Phonebook entries or SMS messages between the
FOMA terminal and the UIM. You can also delete the Phonebook entries
or SMS messages stored in the FOMA terminal or the UIM.
You can save a total of 20 received and sent SMS messages to the UIM.
Copy/Delete Data Items
mPhonebookUIM operation
Enter your Terminal Security Code.
When you enter your Terminal Security Code, “
” appears, and you cannot use
phone and mail functions.
When a call comes in just before entering your Terminal Security Code, UIM
Operation ends.
See page 388.
transmission See page 389.
Copy to microSD
See page 372.
Text memo info
You can display the date and time when the text memo was
created, the date and time of the latest update, and the category.
Category
You can classify text memos by category.
Select a category.
If you do not set, the category is set to “None”.
Delete this
YES
Delete selected
Put a check mark for text memos to be deleted
l(
)YES
Delete all
Enter your Terminal Security CodeYES
418
Copy or DeleteSelect a copy end or delete source
Phonebook or SMS
Phonebook
Search the Phonebook to list the entries.
SMS
Inbox . . . . . Copies or deletes the data in the Inbox.
Outbox . . . Copies or deletes the data in the Outbox.
Select a folder and show the list.
When copying or moving data items to the UIM, the confirmation display appears
telling that 2in1 management information will be deleted if 2in1 is activated.
Put a check mark for data items to be copied or deleted
l(
)YES
Function Menu while the Phonebook List or SMS List is
Displayed
Start copy/
Start deletion
You can start copy or deletion.
Select this
You can select the data item.
Select all in tab
You can select all the Phonebook entries in the displayed tab.
Select all
You can select all data items.
Release this
You can release the selection.
Release all in tab
You can release all the selected Phonebook entries in the
displayed tab.
Release all
You can release all selections.
Detail
You can display the detailed Phonebook display or the detailed
SMS display.
Move or Copy from the Function Menu of Mail
Outbox list/Detailed Sent Mail display/Inbox list/
Detailed Received Mail displayi(
Move/copyUIM operation
Select a move method or copy methodYES
“
“
(blue)” indicates an SMS message in the FOMA terminal.
” indicates an SMS message on the UIM.
Information
The number of phone numbers/mail addresses you can store in a single Phonebook
entry differs between the FOMA terminal and the UIM. Therefore, you cannot copy
the second or later phone numbers/mail addresses stored in the FOMA terminal to
the UIM. You cannot copy the data that cannot be stored on the UIM such as a postal
address, either.
How to Use Flat-plug Earphone/
Microphone with Switch
You can make/receive a call by using the Flat-plug Earphone/Microphone
with Switch (option).
Connect Flat-plug Earphone/Microphone with Switch
Open the cover of the Earphone-Microphone/AV output terminal and
insert the connecting plug of the Flat-plug Earphone/Microphone with
Switch. (See page 22)
419
Convenient Functions
Copy from the Function Menu of Phonebook
Detailed Phonebook displayi(
)Move/copy
Copy to UIM or Copy to phoneYES
Information
The types of character fonts you can use differ between the FOMA terminal and the
UIM; therefore a pictograph is converted into a space.
When you copy Phonebook entries from the FOMA terminal to the UIM, the name of
up to 10 full-pitch/21 half-pitch characters and the reading of up to 12 half-pitch
characters are converted to full-pitch katakana characters and copied. The rest
characters are not copied.
Phonebook entries stored as secret data cannot be copied to the UIM even in Secret
Mode or Secret Data Only.
If you set the same group name in the FOMA terminal and the UIM, the group settings
for the Phonebook are retained. If you set different group names in the FOMA terminal
and the UIM, the group settings are not retained.
You can neither move nor copy SMS reports.
You cannot protect SMS messages you have moved or copied to the UIM. If you copy
or move protected SMS messages to the UIM, SMS messages on the UIM are
unprotected. Also, the reply and forward icons become the read icons.
If SMS messages are moved or copied from the FOMA terminal to the UIM, you can
check them in the “Inbox” or “Outbox” folder.
While you use 2in1, all the SMS messages are saved as the ones for Number A,
regardless of the current mode.
When you move or copy SMS messages from the UIM to the FOMA terminal, they
are moved or copied to the “Inbox” or “Outbox” folder.
Selecting a Microphone for Use when an
Earphone is Connected
Receive Calls Using the Switch
During ringingPress the switch of the Flat-plug
Earphone/Microphone with Switch.
A beep sounds and you are connected.
With a videophone call, the image through your camera is sent to the other party.
You can switch between that image and the substitute image by pressing m
during the videophone call. (See page 74)
You can use the switch also with the FOMA terminal closed or in Horizontal Open
Style. If you receive a videophone call in Horizontal Open Style, the substitute
image is sent to the other party.
You can answer calls also by operating the FOMA terminal.
When “Auto answer setting” is set to “ON”, a call is answered automatically after
the ring time elapses.
You can select the microphone to use when the Flat-plug Earphone/
Microphone with Switch (option) is connected from the microphone of
the FOMA terminal or the microphone of the earphone/microphone.
mSet./ServiceOther settings
Headset mic. setting
Built-in microphone or Headset microphone
Convenient Functions
Information
When you connect earphones without a microphone, select “Built-in microphone”.
When you set to “Built-in microphone” and connect the Flat-plug Earphone/
Microphone with Switch, the sensitivity of the microphone of the FOMA terminal is
improved.
After talking, press and hold the switch of the Flat-plug
Earphone/Microphone with Switch for at least one
second to end the call.
A beep sounds twice and you are disconnected.
Make Calls Using the Switch
Enter a phone number
or
call up a Phonebook entry, redial item, dialed call record,
or received call record.
Press and hold the switch of the Flat-plug Earphone/
Microphone with Switch for at least one second
Start talking when the other party answers.
A beep sounds and you are connected.
You can use this function even in Horizontal Open Style. However, you cannot
make a videophone call by pressing the switch of Flat-plug Earphone/
Microphone with Switch.
You can make a call also by operating the FOMA terminal.
After talking, press and hold the switch of the Flat-plug
Earphone/Microphone with Switch for at least one
second to end the call.
A beep sounds twice and you are disconnected.
420
Information
Regardless of the setting for “Keypad sound”, a tone for connecting and disconnecting
the line sounds.
Note that you might be connected if you try to connect the Flat-plug Earphone/
Microphone with Switch after the ring tone sounds.
To release hold, press the switch of the Flat-plug Earphone/Microphone with Switch
during answer-hold (On Hold) and while a call is on hold (Holding). (When a
videophone call is put on hold, the image through your camera is sent and the
videophone call starts.)
Do not press or release the switch of the Flat-plug Earphone/Microphone with Switch
in succession. You might be automatically connected.
If you have signed up for Call Waiting Service and “Multi calling” is displayed during a
call, you can switch two calls by pressing and holding the switch of the Flat-plug
Earphone/Microphone with Switch for at least one second. However, you cannot use
the switch to end the call.
You can adjust the earpiece volume by pressing .< (raise) or .> (lower) during a call.
Information
Selecting Other Party to Call for when an
Earphone is Connected
When “Headset switch to call” is set to “Voice call” and the Stand-by
display is shown, you can press the switch of the Flat-plug Earphone/
Microphone with Switch (option) to make voice calls.
mSet./ServiceIncoming callAuto call/answer set.
Headset switch to callVoice call or OFF
You can check the currently set phonebook entry by pressing l(
).
Search the PhonebookSelect a Phonebook entry.
Using Bluetooth Function
Information
+m-9-4
You can connect between Bluetooth devices wirelessly. When you
connect, for an example, your FOMA terminal to Wireless Earphone Set
02 (option) using Bluetooth communication, you can talk on the phone or
listen to music with your FOMA terminal carried in a bag.
Note that battery consumption will be faster when you use Bluetooth connection.
Wireless communications with all the Bluetooth devices are not necessarily
guaranteed.
Receiving a Call Automatically when an
Earphone is Connected
If a call comes in while the Flat-plug Earphone/Microphone with Switch
(option) is connected, the FOMA terminal automatically answers the call
after the specified ring time elapses.
mSet./ServiceIncoming call
Auto call/answer set.Auto answer setting
ON or OFFEnter a ring time (seconds).
Enter from “001” through “120” in three digits.
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
421
Convenient Functions
You can set a Phonebook entry in the FOMA terminal (Phone) only.
When the Phonebook entry contains multiple phone numbers, the first phone number
is set.
If you delete the set Phonebook entry, the Phonebook entry stored in the memory
number 999 is automatically set to Headset Switch to Call.
When the FOMA terminal automatically answers a videophone call, a substitute
image is sent to the other party. You can switch between the substitute image and the
camera image by pressing +m during the videophone call. (See page 74)
If you activate Voice Mail Service or Call Forwarding Service together with Auto
Answer Setting and want to give priority to Auto Answer Setting over the service, set
its ring time shorter than that for Voice Mail Service or Call Forwarding Service.
Even if you connect the Flat-plug Earphone/Microphone with Switch while ringing,
Auto Answer Setting does not work. However, if you disconnect it while ringing, Auto
Answer Setting works.
During 64K data communication or connecting the Flat-plug AV Output Cable
(option), Auto Answer Setting does not work.
What You can Do with Bluetooth Function
With your FOMA terminal, the following six services are available:
Headset, Hands-free, Audio, Dial-up Communication, Object Push and
Serial Port services. Also, the Audio/Video remote control service
(Ver.1.3) might be available when you use the Audio service. (Only with
compatible Bluetooth devices)
Supported version
Bluetooth Specification Ver. 2.0 + EDR compliant※1
Convenient Functions
Supported profiles※2 (Supported services)
HSP: Headset Profile
HFP: Hands-Free Profile
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Video Remote Control Profile
DUNP: Dial-up Networking Profile
OPP: Object Push Profile
SPP: Serial Port Profile
※1 The FOMA terminal and all Bluetooth function-installed devices have ensured that
they conform to the Bluetooth Specification according to the rules the Bluetooth SIG
defines, and are all authenticated. However, operating methods might differ, or data
might not be exchanged even when they are connected wirelessly, depending on
the features or specifications of connecting devices.
※2 Standardizes the connecting procedures of Bluetooth function per feature of a
device.
■Talk through Headset
When you connect Wireless Earphone Set 02 (option) or a Bluetooth headset
(commercial item) to the FOMA terminal using Bluetooth communication, you can talk
wirelessly.
・Use the Headset service.
■Talk Hands-free
When you connect a Bluetooth communication device such as a car navigation
system (commercial item) to the FOMA terminal using Bluetooth communication, you
can communicate hands-free using the microphone and speaker on the car navigation
system.
・Use the Hands-free service.
■Play back on Audio Equipment
When you connect Wireless Earphone Set P01/02 (option) or Bluetooth
communication compatible audio equipment (commercial item) to the FOMA terminal
using Bluetooth communication, you can play back a stereophonic high-quality sound
wirelessly.
However, the devices that support audio of 1Seg programs or video files are limited.
(For details, see “Information” of “Play Back Audio of 1Seg Programs”.)
・Use the Audio service.
■Communicate wirelessly
When you connect a Bluetooth communication compatible personal computer to the
FOMA terminal using Bluetooth communication, you can perform packet
communication or 64K data communication using the FOMA terminal as a modem.
・Use the Dial-up Communication service.
・For details, refer to the PDF version of “Manual for PC Connection”.
■Send Phonebook via Bluetooth communication
You can send the Phonebook entries by connecting the Bluetooth device to the FOMA
terminal using Bluetooth communication. You can send them from the Function menu
of the Phonebook.
・Use the Object Push service.
■Use Bluetooth communication from i-αppli
By connecting the FOMA terminal with another mobile phone or Bluetooth
communication compatible device using Bluetooth communication, you can play a
match game with your friends or manage data files on an i-αppli program.
・Use the Serial Port service.
■Tone from Bluetooth devices
Connected service
422
HSP
HFP
A2DP
Voice call dial tone
○
Voice/Videophone call ring tone
○※1, ※2
○
○※2
Ringback tone at voice/videophone call
○
○
The other party’s voice at voice/videophone call
○
○
Connected service
Notes on using Bluetooth devices
HSP
HFP
A2DP
○
PushTalk ring tone
○
1Seg audio
i-motion playback tone
○
○※3
Caller’s voice from Record Message at voice call
○
Video playback tone
○
PC movie playback tone
○
MUSIC Player playback tone
○
Music&Video Channel playback tone
○
Alarm preferred
○※4
○※4
Operation preferred
※5
※5
○
※5
Alarm tone
Mail ring tone
Alarm preferred
Operation preferred
※5
※5
○
※5
Information
Refer to the instruction manual for a Bluetooth device as well.
■Radio interference with wireless LANs
Bluetooth devices use the same frequency band (2.4GHz) as wireless LANs
(IEEE802.11b/g). Therefore, if a Bluetooth device is used near a wireless LAN device,
radio interference may cause lowering of the communication speed, noise or
connection fail. In this case, take the following measures:
Keep your FOMA terminal and the wireless connection-target Bluetooth device away
from the wireless LAN device 10 meters or more.
When you use them within a distance of 10 meters, turn off the power to the wireless
LAN device.
■Radio waves generated from the Bluetooth device may possibly give an
adverse effect on electronic medical appliances.
As an accident could result in some cases, make sure that you turn off the power to
the FOMA terminal and Bluetooth devices in places as shown below:
・On trains
・In airplanes
・In hospitals
・Nearby automatic doors or fire alarms
・In places such as gas stations where flammable gas is generated
423
Convenient Functions
○: Output from the Bluetooth device.
: Not output from the Bluetooth device, instead it is played back from the FOMA
terminal.
※1 The ring tone sounds from both the Bluetooth device and FOMA terminal when
“Headset usage setting” is set to “Headset and speaker”.
※2 The ring tone sounds from the FOMA terminal when “Forward ring tone” is set to
“OFF”.
※3 The tone does not sound for i-motion movies played back while being obtained from
sites.
※4 The alarm tone sounds from the Bluetooth device only during a call. The alarm tone
that sounds from the Bluetooth device is not the one set for Alarm. It beeps.
※5 The alarm tone/mail ring tone does not sound when a display other than the
Stand-by display is shown.
Some Bluetooth devices might not work as specified in the table above.
■Observe the following to make a good connection:
The distance between your mobile phone and another Bluetooth device must be
within 10 meters under line-of-sight conditions. The allowable connection distance
may be shorter, depending on the ambient environment (such as walls or furniture)
and the structure of a building. When there are any obstructions between the FOMA
terminal and Bluetooth device, the allowable connection distance may also be
shorter.
Particularly, if there is a wall or floor of reinforced concrete between them, they may
be unable to connect with each other. Above mentioned connection distance is not
guaranteed.
During connection, keep Bluetooth devices as possible as away from other electric
devices (such as home electric appliances, AV devices, OA devices). (The Bluetooth
device is liable to be adversely affected by a microwave oven so keep as possible as
away from the microwave oven.) Otherwise, normal connection cannot be performed
when electric devices are powered on or Bluetooth devices may cause noises or a
reception failure on a television or radio set (television images may degrade for
particular channels of UHF or satellite broadcasting).
If there is a broadcast station or radio near a Bluetooth device to which you want to
connect, your FOMA terminal may be unable to connect with the Bluetooth device. In
such a case, move the Bluetooth device to a place where connection is possible.
Strong radio waves may prevent connection between Bluetooth devices.
With a Bluetooth device put in your bag or pocket, you can make a wireless
connection. However, if the Bluetooth device and FOMA terminal is separated by
your body, communication speed might be lowered or noise could result.
Register Device
You can register a Bluetooth device to the FOMA terminal. You can
register up to 10 Bluetooth devices.
mLifeKitBluetoothDevice list
YES
Convenient Functions
The Bluetooth devices around the FOMA terminal are
searched. You need to place the Bluetooth device to be
registered on standby for registration beforehand.
Up to 20 searched devices are listed on the Device list.
You can search for Bluetooth devices also by pressing
l(
) from the Device list.
When any Bluetooth devices have already been
registered, Device list is displayed and those registered ones are displayed.
Select a Bluetooth device to be registeredYES
Select the text box for entering the
Bluetooth passkey
Enter the Bluetooth passkeySet
You can enter up to 16 half-pitch alphanumeric
characters.
For the Bluetooth passkey, refer to the instruction
manual for the Bluetooth device.
You might not need to enter the Bluetooth pass key
depending on the Bluetooth device. In this case, go to step 4.
(For registering Wireless Earphone Set P02, you do not need to enter the
Bluetooth pass key.)
Select a service to be connected.
The Bluetooth device is connected and “ (blue)” blinks.
When no communication with the Bluetooth device is
made for a certain period of time, your FOMA terminal is
placed in low power consumption mode, and “ (black)”
Service Selection
stays on.
display
When you use the Bluetooth device which is able to
connect multiple services, the confirmation display appears asking whether to
connect another service in succession.
“
(blue)” is displayed during connection, “
(gray)” is displayed on standby
for connection next to the service name.
If you select “Dial-up”, the FOMA terminal is placed on standby for connection.
To disconnect, select the connected service and select “YES”.
See “Accept Registered” on page 426 for how to cancel the service on standby.
Information
When 10 Bluetooth devices have already been registered, the confirmation display
appears asking whether to overwrite them. When you select “YES”, the Bluetooth
device that is not protected, or not set for “Preferred device” and with the oldest
communication date/time, except in communicating or in standby state, is overwritten.
You cannot activate Bluetooth function during Self Mode.
Connect
You can connect the registered Bluetooth device to the FOMA terminal.
mLifeKitBluetoothDevice list
Select a Bluetooth device to be connected
Select a service to be connected.
See step 4 on page 424 for
details.
Device list
424
Service Selection
display
■Device list
Device class
The following icons are displayed according to the
type of Bluetooth device:
“
”, “
”, “
”, “
”, “
”, “
”, “
”
Device name
The name of Bluetooth device is displayed.
When no name is detected by search, the Bluetooth
address is displayed.
Connecting status
：Being connected
：Not connected
：Not detected
Function Menu of the Device List
：Not registered
Background
color
Frame
color
Blue
Gray
None
You can set a Bluetooth device to be connected taking priority
over other devices when a call comes in. You can set this for the
Headset service compatible Bluetooth device only.
When you already set another Bluetooth device for “Preferred
device”, that setting is canceled, and the selected Bluetooth
device is set for the priority device.
To release it, perform the same operation.
Protect/release
You can protect the registered Bluetooth device so that it is not
deleted or overwritten. You can protect up to five devices.
To release it, perform the same operation.
Change device
name
You can change the name of the registered Bluetooth device.
Enter a device name.
You can enter up to 16 full-pitch/32 half-pitch characters.
Status
Delete
You can delete the registered Bluetooth device.
YES
Description
You can display the device name, Bluetooth address, device
class, and supported profile.
Add desktop icon
See page 31.
Not connected (unregistered)
Blue
Gray
Blue
Not connected (registered)
White
Green
None
Being connected
Green
White
Green
Standby for connection
White
Light green
None
Preferred device
Gray
Gray
None
Not supported
Information
When the Bluetooth device is turned off or when the Bluetooth device does not
respond while a connection is being established or being disconnected, it takes
maximum about 110 seconds for processing.
When your FOMA terminal is connected using the Headset service, Hands-free
service, Audio service, or Dial-up Communication service, and is disconnected from
the Bluetooth device, the FOMA terminal is placed on standby for connection. Also,
your FOMA terminal is placed on standby for connection the next time the power is
turned on after the FOMA terminal is turned off while it is connected or is on standby
for connection.
Information
When you select a registered Bluetooth device, the registered profile is updated.
(When the device name has been changed, the profile is retained as it is.) When you
select a profile that is different from the registered one, the profile is added and then
registered.
Even when Preferred Device is set, you cannot connect that device unless the
Headset service is placed on standby for connection. When other Bluetooth device is
connected with the Headset service, the Bluetooth device that is being connected has
priority.
You cannot delete when the status of Bluetooth device is during connection or on
standby for connection.
425
Convenient Functions
Character
color
Go to step 3 on page 424.
Preferred device
Device list
Protect
Displayed when the registered contents are protected.
Profile state
The state of each profile is displayed in color.
Mark
Register devices
Accept Registered
You can place the connecting state of all the registered Bluetooth
devices on standby for connection.
mLifeKitBluetoothAccept registered
Put a check mark for the services to be placed on
standbyl(
To release, remove the check mark and press l(
During standby, “ (blue)” lights.
).
Bluetooth Power OFF
Convenient Functions
You can suspend all the services that are connected or on standby for
connection, and suspend off the Bluetooth function of the FOMA
terminal.
mLifeKitBluetoothBluetooth power OFFYES
You can activate the standby for connection for the previously-connected
Bluetooth device by mLifeKitBluetoothActivate Bluetooth.
Accept Dialup Devices
You can talk or communicate by connecting the FOMA terminal
wirelessly with a Bluetooth communication compatible personal
computer or car navigation system and others. For details, refer to
“Preparing Bluetooth Communication” on the PDF version of “Manual
for PC Connection”.
Make a Call
You can make a call wirelessly when the FOMA terminal is connected to a
Bluetooth device using Headset service or Hands-free service.
Connect a Bluetooth device using Headset service or
Hands-free service.
See page 424 for connecting to a Bluetooth device.
Make/Receive a call via the Bluetooth device.
“
” is displayed during a call via the Bluetooth device.
For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
426
Selecting whether to talk over the FOMA terminal or a
Bluetooth device
Press and hold d for at least one second during a call.
You can select also by pressing i(
) and selecting “Talk on BT/Phone”.
During a call with the FOMA terminal while connecting using Headset service, you can
switch only from the Bluetooth device.
For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
You cannot talk over a Bluetooth device while USB Hands-free compatible device or
Flat-plug Earphone/Microphone with Switch (option) or Flat-plug AV Output Cable
(option) is connected even if you switch to the Bluetooth device.
You cannot switch to a Bluetooth device while Remote Monitoring is activated.
Information
During Lock All or Omakase Lock, you cannot answer calls via the Bluetooth device.
When a call comes in while the Bluetooth device is connected using Headset service
or Hands-free service, the ring tone sounds from the Bluetooth device even if Manner
Mode is activated or “Ring volume” is set to “Silent” on the FOMA terminal.
During a call on the Bluetooth device, you cannot adjust the sound volume of the
Bluetooth device by adjusting that on your FOMA terminal.
During a call on the Bluetooth device, the call state does not change by closing the
FOMA terminal regardless of the setting of “Setting when closed”.
When the Bluetooth communication is disconnected during a call on the Bluetooth
device, the call state follows the setting of “Disconnection settings”. However, when it
is disconnected while the FOMA terminal is closed and “Disconnection settings” is set
to “Continue on the phone”, the call shifts to the state as specified by “Setting when
closed”. When “Setting when closed” is set to “End the call”, the call shifts to “No tone”
state.
Play Back Audio of 1Seg Programs
When you connect your FOMA terminal to a Bluetooth device using
Audio service, you can output the audio of 1Seg programs from the
Bluetooth device.
Connect a Bluetooth device using Audio service.
See page 424 for connecting to a Bluetooth device.
2
Watch a 1Seg program.
The sound is output from the Bluetooth device.
Once you connect the FOMA terminal to the Bluetooth device using Audio
service, a connection history is stored. When the connection history is found, the
FOMA terminal tries to connect to the Bluetooth device automatically for watching
a 1Seg program even if it is not connected using Audio service. When the
connection is successfully completed, the audio is output from the Bluetooth
device. When the connection fails, the confirmation display appears asking
whether to output audio from the FOMA terminal.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
Information
Connect a Bluetooth device using Audio service.
Play back a movie, video or music file.
See page 424 for connecting to a Bluetooth device.
If you connect using Audio service from the Bluetooth device while placing an
Audio service on standby for connection, MUSIC Player starts automatically.
However, it might not start automatically when a display other than Stand-by
display is shown or another function is activated.
The sound is output from the Bluetooth device.
When the confirmation display appears asking whether to start output to the
Bluetooth device, select “YES”.
Once you connect the FOMA terminal to the Bluetooth device using Audio
service, a connection history is stored. When the connection history is found, the
FOMA terminal tries to connect to the Bluetooth device automatically for playing
back a file even if it is not connected using Audio service. When a connection is
successfully completed, the sound is output from the Bluetooth device. When the
connection fails, the confirmation display appears asking whether to output sound
from the FOMA terminal. However, it cannot connect to automatically for playing
back an i-motion movie.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
Information
You can output the audio of video file only on an A2DP compatible Bluetooth device
that supports copyrighting by the SCMS-T.
While you are playing back the sound of a movie, video, or music file from a Bluetooth
device, you cannot adjust the sound volume by adjusting that on your FOMA terminal.
Even when you are using Play Background for MUSIC Player or Music&Video
Channel, the remote-control operation for Bluetooth device is available.
You cannot output the audio from the Bluetooth device when the Flat-plug Stereo/
Earphone Set (option) or Flat-plug Earphone/Microphone with Switch (option) is
connected.
427
Convenient Functions
You can output the audio of 1Seg programs only on an A2DP compatible Bluetooth
device that supports copyrighting by the SCMS-T.
While the audio of a 1Seg program is output from a Bluetooth device, you cannot
adjust the sound volume of the Bluetooth device by adjusting that on your FOMA
terminal.
You cannot output the audio from the Bluetooth device when the Flat-plug Stereo/
Earphone Set (option) or Flat-plug Earphone/Microphone with Switch (option) is
connected.
If the audio from a 1Seg program stops while it is output on the Bluetooth device,
check your FOMA terminal as the possible causes are as follows:
･When the Bluetooth device is disconnected
･When a location provision request of GPS comes in
･When a mail message or Message R/F comes in
･When a PushTalk call comes in
･When the low battery alarm sounds
･When an alarm for “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
Play Back Sound/Music of Movie or Video
When you connect your FOMA terminal to a Bluetooth device using
Audio service, you can output the sound of movies or video, music via
MUSIC Player, etc., from the Bluetooth device.
Information
Convenient Functions
If the sound of a movie, video, or music file stops while it is played back on the
Bluetooth device, check your FOMA terminal as the possible causes are as follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･ When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
MUSIC Player ends when the connection with a Bluetooth device is disconnected with
the FOMA terminal closed while using MUSIC Player with a Bluetooth device
connected.
Bluetooth Settings
mLifeKitBluetoothBluetooth settings
Do the following operations.
You cannot operate during a call or data communication.
Set authentications You can set whether to set authentication when sending a
Phonebook entry via a Bluetooth device. If you set to “ON”, set
whether to encrypt the data.
ON or OFFON or OFF
Session number
setting
You can set whether to enter the password for sending all
Phonebook entries.
ON or OFF
Time-out to search You can set the time for searching for Bluetooth communication
compatible devices around the FOMA terminal.
Enter a device search time (seconds).
Enter two-digit numerals as in “05” through “20”.
428
Forward ring tone
You can set whether to send a ring tone for the voice call and
videophone call to the connected Headset or Hands-free device.
When the device is specified as “Preferred device”, connection is
made to send the ring tone even if the device is on standby.
ON or OFF
Disconnection
settings
You can select whether to end talking or continue talking on the
FOMA terminal when Bluetooth communication is disconnected
while talking through the Headset or Hands-free device.
End the call or Continue on the phone
Dial from headset
You can set whether to make a call by pressing the switch on the
Headset.
Valid or Invalid
Bluetooth info
You can display the device name, Bluetooth address, device
class, and supported profiles of Bluetooth function mounted on
the FOMA terminal. You can change the device name.
To change the device name, press l(
), enter the
device name. You can enter up to 16 full-pitch/32 half-pitch
characters.
Information
While a Bluetooth device to which Phonebook entries are sent is connected using a
service other than Object Push, the Phonebook entries are sent with authentication
and with encryption regardless of this setting.
You cannot set this function while a Bluetooth device is connected or on standby for
connection.
You cannot set this function while a Bluetooth device using the Headset service or
Hands-free service is connected or on standby.
If you select a pictograph for the device name, it might not be correctly displayed
depending on the destination Bluetooth device.
Character Entry
Entering Characters. . . . . . . . . . . . . . . . . . .
Entering Characters in Mode 1 (5-touch)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Common Phrases . . . . . . . . . . . . . .
Cutting/Copying/Pasting Text. . . . . . . . . . . . . . . . . . . . . . . . . . .
Storing Words in Own Dictionary. . . . . . . . .
Using Learned Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Downloaded Dictionary . . . . . .
Entering Characters in Mode 2 (2-touch)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Characters in Mode 3 (NIKO-touch)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
430
430
435
436
436
437
437
438
438
For details on “Kuten Code List”, refer to the PDF version of “Kuten Code List” on the provided CD-ROM or DOCOMO website.
To see the PDF version of “Kuten Code List”, you need to have Adobe® Reader®. If it is not installed in your personal computer, install Adobe®
Reader® from the provided CD-ROM to see it.
For details such as how to use it, refer to “Adobe Reader Help”.
429
Entering Characters
The FOMA terminal is provided with many functions that require to enter
characters such as creating the Phonebook or composing mail
messages.
Character Entry Display
On the Character Entry (Edit) display, the information of character input
method, input mode, and the remaining number of characters and others
are displayed.
Character input method
：Mode 2 (2-touch)
：Mode 3 (NIKO-touch)
Not displayed in Mode 1 (5-touch).
Input mode
abc：Alphabet input mode
123：Numeral input mode
漢：Kanji/Hiragana input mode
カナ：Katakana input mode
Full/Half-pitch
1/ ：Full-pitch input mode
1/ ：Half-pitch input mode
Remaining/Maximum bytes that can be entered
“Number of entered characters” might be displayed depending on the function.
One half-pitch character is counted as one byte and one full-pitch character as two
bytes.
Half-pitch character “゛” and “゜” are counted as one character.
Select Character Input Method
+m-3-5
Three types of character input methods are available as shown below:
Mode 1 (5-touch) . . . . . . . . . See page 430
Multiple characters are assigned to a single key. Each time you press the key,
characters switch.
Mode 2 (2-touch) . . . . . . . . . See page 438
Enter characters by pairs of numerals.
Mode 3 (NIKO-touch) . . . . . . See page 438
Enter characters by pairs of numerals.
mSet./ServiceOther settings
Character input methodInput mode
Put a check mark for modes to be usedl(
Select at least two modes.
Select a priority mode.
Select a mode you use preferentially from modes selected in step 1.
Switching modes on the Character Entry (Edit) display
Press and hold l(
) for at least one second, or select “Character input” and
then select “Change input mode” from the Function menu.
Entering Characters in Mode 1 (5-touch)
In the step for entering characters, press l(
) to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
Character Entry
Enter Characters
You can enter characters by using Prediction Conversion which converts
a few entered words into the predicted ones and by using Context
Forecast which displays the next conversion candidates inferred from
the relation between paragraphs.
The FOMA terminal increases prediction conversion candidates and context forecast
candidates by learning characters.
430
Enter “タダの菓子” in a text memo.
mStationeryText memoSelect .
Enter hiragana characters in Kanji/Hiragana input mode.
た→ Press 4 once and Vo once.
の→ Press 5 five times.
か→ Press 2 once.
し→ Press 3 twice.
You can enter up to 24 characters at a time. However, when “Predict” is set to “ON”,
if you enter 6 or more characters, the conversion mode is automatically switched
to the ordinary conversion mode.
When a character on the same key comes after a character, press Vo to move
the cursor, and enter the next character.
If you set “Character set time”, you can omit the operation to move the cursor.
You can perform switching between uppercase and lowercase or entering “゛”
and “゜” by pressing a after entering a character.
Each time you press d, characters are displayed in reverse order.
If you set “Predict” to “ON”, each time you press l, ordinary conversion mode
and prediction conversion mode switch.
You can press i(
) to display the candidate list of alphanumeric or
katakana characters. Depending on the entered character, the conversion
candidates for date/time are displayed.
When “
” is displayed while editing the i-mode mail text, you can press
m(
) to display the candidate list of Deco-mail pictograms.
To fix a character as it is without conversion, press Oo(
).
The conversion mode is automatically switched to the ordinary conversion mode.
).
Use Bo to move the cursor onto the candidate list
Use Mo to highlight “菓子” and pressOo(
).
The selected characters are fixed.
When the character strings that are assumed to be the context forecast
candidates are found after fixing the characters, that context forecast candidates
are displayed. Press Bo to move the cursor onto the candidate list to enter the
context forecast candidates.
When you press r while you are selecting the context forecast candidates, the
Character Entry (Edit) display returns.
Information
The learning function stores up to 1,000 words, and the character of a high conversion
rate goes up in the character order list.
The candidate character strings are displayed from characters converted as usual
and from a dictionary downloaded from sites.
・Only a small number of character strings are registered by default so candidate
characters might not be displayed in some cases. By doing the character conversion
as usual, the converted characters are added to the candidate characters.
・You can download a dictionary from sites and add candidate characters from the
dictionary. However, when you delete the downloaded dictionary, the added
candidate characters are also deleted from the existing candidate characters. (See
page 204 and page 437)
In the candidate list of Deco-mail pictograms, only the pre-installed Deco-mail
pictograms are displayed and the downloaded ones are not displayed. If you delete
the pre-installed Deco-mail pictograms and re-download them, they are not displayed
in the candidate list.
You can use Prediction Conversion and Context Forecast with 2-touch and
NIKO-touch in Kanji/Hiragana input mode.
The number of kanji characters that you can convert to is limited so you might not be
able to convert to some kanji characters. You can use Kuten Code to enter kanji
characters that you cannot convert to. The number of characters you can enter is
6355 in the JIS level-1 and level-2 kanji sets.
Complicated kanji characters are partly deformed or simplified.
431
Character Entry
Use Co to move the cursor onto “の”.
Use Bo to move the cursor onto the candidate list
Use Mo to highlight “タダの” and press Oo(
By pressing m(
)/c(
), you can scroll the candidate list page by
page.
When you press r while you are selecting a conversion candidate, the
Character Entry (Edit) display returns.
Press c(
) to fix the whole paragraph.
The Character Entry (Edit) display appears in prediction conversion mode when
“Predict” is set to “ON”, and appears in ordinary conversion mode when set to
“OFF”.
だ→ Press 4 once and a once.
Data you are editing
Other Entry Functions
Item
Operation/Explanation
Katakana input
Press l(
) a few times to switch to Katakana input
modePress keys to enter characters.
Alphabet input
Press l(
) a few times to switch to Alphabet input
modePress keys to enter characters.
In half-pitch Alphabet input mode, you can display the phrase
list frequently used when inputting URLs and others by
pressing c(
).
Numeral input
Press l(
) a few times to switch to Numeral input
mode Press keys to enter numerals.
You can enter “+” by pressing and holding 0 for at least one
second in Numeral input mode.
Line feed
Press a.
When the cursor is at the end of text and characters are fixed,
you can press Xo to break a line.
Information
A line feed is counted as one full-pitch character.
You cannot break a line depending on the function such as editing in the text box for
i-mode.
Correct Characters
Move the cursor to the left of the character you want to
correctr
Character Entry
The character at the right of the cursor is deleted.
Press and hold r for at least one second to delete all characters on and after the
cursor.
When no character is found to the right side of the cursor, the character to the left
side of the cursor is deleted. Press and hold r for at least one second to delete
all characters.
Enter a correct character.
The character is entered in the position of the cursor.
432
When the battery alarm sounds
The data you have been editing is automatically fixed and saved. Charge the battery or
replace it with a new charged battery to resume editing. However, you cannot save the
unfixed data being converted.
When you press h
The confirmation display appears asking whether to discard the data you are editing.
When a call or mail comes in
The Multitask function works, so the data you are editing is retained, and you can answer
the call or receive the mail.
You can return to the data edit display by switching menu, by pressing and holding x
for at least one second. You can return to the data edit display also by ending the call or
mail function.
+m-3-5
Predict
You can set whether to display the prediction conversion/context
forecast candidates in the candidate list.
mSet./ServiceOther settings
Character input methodPredictON or OFF
Intelligent with Secret
+m-3-5
You can set whether to store the characters converted in Secret Mode or
Secret Data Only as learned words.
mSet./ServiceOther settings
Character input methodInt.with secret
Enter your Terminal Security CodeON or OFF
Function Menu while Entering (Editing) Characters
See page 148 for the Function menu of the Message Entry display.
Full pitch/Half pitch
You can switch between full pitch and half pitch.
Copy
See page 436.
Cut
See page 436.
Paste
See page 436.
Undo
You can undo the fixed, deleted, cut, or pasted text. You can
undo the operation up to 10 times. However, you can undo the
fixing of characters only once.
You can undo the operation also by pressing and holding
d for at least one second.
Symbols
symbol in succession. Press r to return to the Character
Entry (Edit) display.
Pictograph/symbols
Pictograph
You can enter symbols while showing them on the display.
Select a symbol
The selected symbol is entered and the Character Entry (Edit)
display returns.
Highlight a symbol and press l(
), you can enter a
You can enter pictographs while showing them on the display.
Select a pictograph.
The selected pictograph is entered and the Character Entry
(Edit) display returns.
Highlight a pictograph and press l(
), you can
enter a pictograph in succession. Press r to return to the
Character Entry (Edit) display.
You can display the Pictograph list also by pressing
m(
).
Press c to switch the pictograph lists in order of
“Pictograph 1” → “Pictograph 2” → “Decomail-pictograph”
[お気に入り (Favorite) through 文字 (Characters)].
However, you can enter “Decomail-pictograph” [お気に入り
(Favorite) through 文字 (Characters)] only while editing the
i-mode mail text. Press m to switch them in the reverse
order.
Press i(
) to display the Symbol list.
Press d to switch between the list of all pictographs and
ordinary input display.
You can display the Symbol list also by pressing and holding
s for at least one second.
Press c to switch the symbol lists in order of Half-pitch
symbols → Full-pitch symbols. Press m to switch them in
the reverse order.
Press i(
) to display the Pictograph list.
Press d to switch between the list of all symbols and
ordinary input display.
Smiley
Space
Select a smiley.
You can select smiley also by pressing c(
entering “かお” and converting it.
) or
You can enter a full-pitch space in full-pitch input mode, and a
half-pitch space in half-pitch input mode.
When the cursor is at the end of text, you can enter a space
also by pressing Vo.
Phrase/quote
Select a folderSelect a common phrase.
In mode other than numeral input mode, you can show the
folder list for common phrases also by pressing and holding
a for at least one second.
Kuten code
You can enter characters, numerals, and symbols on the
Kuten Code list (see the PDF version of “Kuten Code List” on
the provided CD-ROM).
You can operate in Kanji/Hiragana input mode.
Enter a four-digit Kuten code.
A character that matches the entered Kuten code is displayed,
and the former input mode returns.
When a character that matches the entered Kuten code is
not found, a space is inserted.
433
Character Entry
Common phrases
Input time
Select a format for entering the date/time
Enter the date/time.
You can enter the date/time using the numeric keys.
You can enter years 1800 through 2099.
Quote phonebook
You can access and quote Phonebook entries. The following
are the items you can quote:
Name, reading, phone number, mail address, postal address,
birthday, memorandums
Postal address, URL, memorandums obtained from i-concier
Name, reading, phone number, mail address
Search the PhonebookSelect a Phonebook entry
Put a check mark for items to be quotedl(
Quote own data
Bar code reader
You can access and quote your personal information. The
following are the items you can quote:
Name, reading, phone number, mail address, postal address,
birthday, memorandums
Enter your Terminal Security Code
Put a check mark for items to be quotedl(
You can start Bar Code Reader. (See page 248)
Character input
Own dictionary
See page 436.
Learned words
See page 437.
Character Entry
Change input mode You can switch the character input methods.
Select an input mode.
You cannot select the input mode that is not selected in
“Input mode” of “Character input method” (see page 430).
Predict
See page 432.
Candidate display
You can set whether to display context forecast candidates.
ON or OFF
434
Character set time
You can select whether to automatically fix the entered
characters while you are entering characters in Mode 1
(5-touch). In addition, you can specify the time until characters
are fixed.
You can omit the operation of pressing Vo to move the
cursor for the entry of characters on the same key.
Fast, Normal, Slow, or OFF
2/NIKO-touch guide You can select whether to list input candidates at the lower
part of the display when you press the first-digit key while you
are entering characters in Mode 2 (2-touch) or Mode 3
(NIKO-touch).
ON or OFF
Help
You can check the operating procedures for entering
characters.
Select an item.
JUMP
You can move the cursor to the top or end of text.
To beginning or To end
When the Character Entry (Edit) display ranges over multiple
pages, the cursor moves to the beginning or end of the page.
Information
When you switch to half-pitch mode in Kanji/Hiragana input mode of NIKO-touch, the
input mode switches to half-pitch Katakana input mode.
You might not be able to enter pictographs depending on the Character Entry (Edit)
display.
Once you have entered pictographs, history of entered pictographs appears first.
You can enter up to 20 Deco-mail pictograms. When you insert other images,
however, the number of Deco-mail pictograms that can be entered is reduced by the
number of inserted images.
You might not be able to enter some symbols depending on the Character Entry (Edit)
display.
Once you have entered symbols, history of entered symbols appears first.
You might not be able to enter common phrases depending on the Character Entry
(Edit) display.
In Japanese Mode, the called-up contents of common phrases pre-installed in the
FOMA terminal differ depending on the input mode.
Information
Information
When you quote a postal address, you cannot quote “〒” or “-” of the postal code.
When you quote a postal address, you cannot quote “〒” or “-” of the postal code.
The personal data of Number A is quoted in A Mode of 2in1, the personal data of
Number B is quoted in B Mode, and the personal data of both Number A and Number
B is quoted in Dual Mode.
You might not be able to enter characters as you like depending on this setting and
your speed of operating keys.
Do not use half-pitch katakana characters and pictographs for your own common
phrases used for composing mail. They might not be correctly displayed. (Pictographs
can be used between i-mode mail messages.)
The Japanese common phrases pre-installed in the “あいさつ (Greeting)” and “ビジ
ネス (Business)” folders are called up in kanji/hiragana in Kanji/Hiragana input mode
and called up in half-pitch katakana in other input modes.
Function Menu of the Common Phrase Folder List
Edit folder name
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters.
When you delete all the characters entered as a folder name,
the folder name is reset to the default.
Reset name
You can reset the folder name to the default.
YES
+m-3-8
Using Common Phrases
You can call up and enter, on the Character Entry (Edit) display, the
common phrases pre-installed in the FOMA terminal, or your own
created common phrases.
The common phrases are sorted into five folders and each folder
contains 10 of them. You can edit the pre-installed common phrases to
save as your own common phrases.
Display Common Phrases
mStationery
Common phrase/dic.
Common phrases1Select a folder.
Common Phrase
Folder list
Edit
Enter a common phrase.
You can enter up to 64 full-pitch/128 half-pitch characters.
When you delete all the characters in a common phrase, the
common phrase is reset to the default.
You can edit a common phrase by pressing l(
).
Reset this
You can reset the common phrase to the default.
YES
Reset all
You can reset all the common phrases in the folder to the default.
Enter your Terminal Security CodeYES
Select a common
phrase.
Common Phrase list
Character Entry
Function Menu of the Common Phrase List/Common
Phrase Display
Common Phrase
display
435
Cutting/Copying/Pasting Text
Storing Words in Own Dictionary
Cut/Copy
You can cut or copy up to 5,000 full-pitch/10,000 half-pitch characters.
Character Entry (Edit) displayi(
Cut or CopySelect a start point.
You can press i(
+m-3-8
In Own Dictionary, you can store up to 100 frequently used words with
your favorite reading.
) to select all characters.
Select a stored Own dictionary to check the stored contents.
You can enter up to 10 full-pitch/20 half-pitch characters. However, you cannot
enter line feeds.
Select an end point.
Information
If you copy/cut the Deco-mail text during creating and paste it, the information about
the decoration is pasted as well.
You might not be able to cut/copy the Deco-mail text, etc., because the memory
space runs short depending on the data volume.
Paste
mStationeryCommon phrase/dic.
Own dictionaryEnter a word.
Enter a reading.
You can enter up to 10 hiragana characters. Also, you cannot store symbols
other than “Long vowel (ー )”.
Even if you enter a space, the word is stored with the space automatically
deleted.
Function Menu while Own Dictionary is Displayed
You can paste cut or copied characters.
New
Go to step 1 of “Storing Words in Own Dictionary” on page 436.
Edit
Go to step 1 of “Storing Words in Own Dictionary” on page 436.
You can edit also by pressing l(
).
Delete this
YES
Delete selected
Put a check mark for own dictionaries to be deleted
l(
)YES
Delete all
Enter your Terminal Security CodeYES
Character Entry (Edit) display
Move the cursor to a start position for pasting
i(
)Paste
Information
Character Entry
When you display Own Dictionary from the Function menu of the Character Entry
(Edit) display, select “Delete” from the Function menu, then select “Delete this” or
“Delete all”.
“Delete selected” does not appear when you display Own Dictionary from the
Function menu of the Character Entry (Edit) display.
436
Using Learned Words
The character strings once you entered are automatically stored and
displayed as the conversion candidates of learned words.
Checking Learned Words
Function menu while entering (editing) characters
Character inputLearned wordsSelect a column
Select a record.
To delete learned words, press i(
) to select “Delete this” or “Delete all”,
and select “YES”. If you select “Delete all”, you need to enter your Terminal
Security Code.
Create Learned Word List
+m-3-8
You can newly create learned words from the subjects and titles of sent
i-mode mail messages stored in your FOMA terminal. The learned words
preceding creation are all deleted.
mStationeryCommon phrase/dic.
Create learned wd listOK
Enter your Terminal Security CodeYESOK
Reset Learned Words
+m-3-5
You can reset the learned words.
Using Downloaded Dictionary
You can make dictionaries downloaded (see page 204) from sites valid.
mStationeryCommon phrase/dic.
Download dictionary
Select a downloaded dictionary.
The downloaded dictionary you have selected is validated and indicated by “★”.
To invalidate a downloaded dictionary, perform the same operation.
You can delete the pre-installed dictionaries. You can re-download them from the
“P-SQUARE” site (see page 206). When you use a UIM other than the one used
for downloading, the UIM security function (see page 39) is set for them.
Function Menu while Downloaded Dictionary is Displayed
Edit title
Edit the title.
You can enter up to 10 full-pitch/20 half-pitch characters.
Set dictionary
You can set the dictionary valid/invalid. Each time you operate,
valid and invalid switch.
Dictionary info
You can display the dictionary title and version.
Delete this
YES
Delete all
Enter your Terminal Security CodeYES
Information
If you delete all the characters entered as a title, the title is reset to the default.
Character Entry
mSet./ServiceOther settings
Character input methodReset learned words
Enter your Terminal Security CodeYES
+m-3-8
437
Entering Characters in Mode 2 (2-touch)
Entering Characters in Mode 3 (NIKO-touch)
When you press two numeric keys to enter two-digit numerals, a
character (symbol) that corresponds to the numerals is entered. Press
the first key to list candidate characters (symbols) at the lower part of the
display. To list candidate characters, you need to set “2/NIKO-touch
guide” to “ON” in advance.
When you press two numeric keys to enter two-digit numerals, a
character (symbol) that corresponds to the numerals is entered. Press
the first key to list candidate characters (symbols) at the lower part of the
display. To list candidate characters, you need to set “2/NIKO-touch
guide” to “ON” in advance.
See page 497 for how characters are assigned to the numeric keys (2-touch).
See page 430 for switching to “2-touch”.
See page 498 for how characters are assigned to the numeric keys (NIKO-touch).
See page 430 for switching to “NIKO-touch”.
Switch Input Modes (2-touch)
Press l(
) from the Character Entry (Edit) display to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
Enter Characters
Enter “タダの菓子” in a text memo.
mStationeryText memoSelect .
The Character Entry (Edit) display appears.
Enter hiragana characters in Kanji/Hiragana input mode.
た→41
だ→41, a
Character Entry
Switch Input Modes (NIKO-touch)
Press l(
) from the Character Entry (Edit) display to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
Enter Characters
Enter “タダの菓子” in a text memo.
mStationeryText memoSelect .
The Character Entry (Edit) display appears.
Enter hiragana characters in Kanji/Hiragana input mode.
た→41
だ→41, a
の→55
の→55
か→21
か→21
し→32
You can perform switching between uppercase and lowercase or entering “゛”
and “゜” by pressing a after entering a character.
し→32
You can perform switching between uppercase and lowercase or entering “゛”
and “゜” by pressing a after entering a character.
Press 80 to switch between uppercase and lowercase.
After entering hiragana characters, go to step 3 on page 431.
After entering hiragana characters, go to step 3 on page 431.
438
Network Services
Checking New Voice Mail Messages
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Voice Mail Service . . . . . . . . . . . . . . . . . . . .
Using Call Waiting Service . . . . . . . . . . . . . . . .
Using Call Forwarding Service . . . . . . . . . .
Using Nuisance Call Blocking Service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
