Panasonic Mobile Communications 208009A UMTS/ GSM Cellular Mobile with Bluetooth® and RFID User Manual 000 P 01A

Download:
Mirror Download [FCC.gov]
Document ID	1019763
Application ID	LgBKS+ZE31GAl1L4rgSO/g==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	263.87kB (3298334 bits)
Date Submitted	2008-10-23 00:00:00
Date Available	2008-11-19 00:00:00
Creation Date	2008-10-15 14:30:51
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2008-10-15 14:31:00
Document Title	000.P-01A.book
Document Creator	FrameMaker 7.2
Document Author:	Administrator

Information
Function Menu of the URL History List
Compose message
You can compose an i-mode mail message with the
highlighted URL pasted to the text.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
Add desktop icon
See page 31.
Set as home URL
You can store the site as Home URL of Full Browser.
YES
You can operate this only from the URL History list of Full
Browser.
i-mode/i-motion/i-Channel/i-concier
Delete
When the number of characters used for a URL exceeds 256 half-pitch characters
(512 half-pitch characters for Full Browser), you cannot store it.
Up to 12 full-pitch/24 half-pitch characters are stored for a title. For longer titles, the
excess characters are deleted. If no title is entered, the URL without “http://” or
“https://” is registered.
Some pages cannot be bookmarked.
Display Web Pages or Sites from a Bookmark
iBookmarkSelect a folder
Select a bookmark to be displayed.
Delete (Delete this) YES
Delete selected
Put a check mark for URL histories to be deleted
l(
)YES
Delete all
Enter your Terminal Security CodeYES
Bookmark Folder list
Function Menu of the Bookmark Folder List

Saving Web Pages or Sites for Quick
Access
Operate folder
Add folder
You can add a new folder. You can add up to nine folders in
addition to each “Bookmark” folder/“Screen memo” folder.
Enter a folder name.
You can enter up to 10 full-pitch/20 half-pitch characters.
Edit folder name
Edit the folder name.
You can enter up to 10 full-pitch/20 half-pitch characters.
Delete folder
You can delete the folder and all bookmarks and screen
memos in the folder. You cannot delete the “Bookmark” folder/
“Screen memo” folder.
Enter your Terminal Security CodeYES
Add Bookmark
Once you bookmark a frequently accessed site, you can display the page
directly. You can register 300 bookmarks each for i-mode and Full
Browser.
From the page to be registeredi(
BookmarkAdd bookmarkYES
Select a destination folder.
Ir/
transmission
Send all Ir data
200
Bookmark list
See page 387.
All
transmission See page 389.
No. of bookmarks
You can check the number of bookmarks stored in all folders.
Delete all
The folders are not deleted.
Enter your Terminal Security CodeYES
Function Menu of the Bookmark List
Compose message
You can compose an i-mode mail message with the
highlighted URL pasted to the text.
Go to step 2 on page 146.
You can compose it also by pressing l(
).
You can send an i-mode mail message with the bookmark
attached.
Go to step 2 on page 146.
Move
You can move bookmarks or screen memos to another folder.
Select a destination folderPut a check mark for
bookmarks or screen memos to be movedl(
YES
Edit title
Edit the title.
You can edit the title also by pressing m(
) from the
list.
You can enter up to 12 full-pitch/24 half-pitch characters for
a bookmark. If you press o
) with a blank, the URL
without “http://” or “https://” is registered.
You can enter up to 11 full-pitch/22 half-pitch characters for
a screen memo. If you press Oo(
) with a blank, the
screen memo is registered as “No title”.
Copy
Copy URL
Copy to microSD
You can copy the URL of the bookmark.
Select a start point for copying
Select an end point for copying.
See page 436 for how to paste copied characters.
See page 372.
You can store the site as Home URL of Full Browser.
YES
You can operate this only from the Bookmark list of Full
Browser.
Add desktop icon
See page 31.
Ir/
transmission
Send Ir data
transmission
No. of bookmarks
See page 386.
See page 388.
You can display the number of bookmarks stored in the
displayed folder.
Delete
Delete (Delete this) YES
Delete selected
Put a check mark for bookmarks or screen memos to
be deletedl(
)YES
Delete all
You can delete all bookmarks or screen memos stored in the
folder.
Enter your Terminal Security CodeYES

Saving Site Contents
Save as a Screen Memo
You can save a displayed page as a screen memo to the FOMA terminal.
You can display the page saved as a screen memo without connecting to
i-mode.
You can save up to 300 screen memos, however, the number of screen
memos you can save decreases depending on the data volume.
From a page to be savedi(
)Screen memo
Add screen memoYESSelect a destination folder.
See page 205 when screen memos are stored to the maximum.
201
i-mode/i-motion/i-Channel/i-concier
Attach to mail
Set as home URL
i-mode/i-motion/i-Channel/i-concier
Information
Up to 11 full-pitch/22 half-pitch characters are stored for a title. For longer titles, the
excess characters are deleted.
If you save the data acquisition completion display, its data file is saved as well. (You
cannot save the data acquisition completion display for Chaku-uta FullÂŽ music files,
for i-motion movies with playable deadline, or for the ToruCa files whose output from
the FOMA terminal is prohibited.) Some data acquisition completion displays cannot
be saved as screen memos. The display except the data acquisition completion
display is saved with a URL of that page of up to 256 half-pitch characters.
When you save SSL pages, their SSL certificates are saved as well.
The contents entered in the text box, or selected with the pull-down menu, check box,
or radio button are not saved to screen memos.
You can save up to 100 Kbytes per page. However, you can save up to 1,024 Kbytes
of the schedule acquisition completion display, up to 500 Kbytes of the i-motion
acquisition completion display, up to 200 Kbytes of the Deco-mail Template
acquisition completion display, up to 20 Kbytes of the Download Dictionary acquisition
completion display, and up to 1 Kbyte of the ToruCa acquisition completion display.
Display a Screen Memo
iScreen memo
Operate folder
Add folder
See page 200.
Edit folder name
See page 200.
Delete folder
See page 200.
Security ON/OFF
You can set the folder to open only when you enter your
Terminal Security Code.
Enter your Terminal Security CodeYES
The folder changes to “
”.
To release it, perform the same operation.
No. of memos
You can display the number of stored screen memos and
protected screen memos in all folders.
Delete all
You can delete all screen memos. The folders will not be
deleted.
Enter your Terminal Security CodeYES
Function Menu of the Screen Memo List
Screen Memo
Folder list
Function Menu of the Screen Memo Folder List
Move
See page 201.
Edit title
See page 201.
Protect ON/OFF
You can protect screen memos not to be deleted. You can
protect up to 150 screen memos, however, the number of
screen memos you can protect decreases depending on the
data volume.
Protected items are indicated by “
”.
To release protection, perform the same operation.
No. of memos
You can display the number of stored screen memos and
protected screen memos in the displayed folder.
Select a folderSelect a screen memo.
Use No to check other
screen memos.
Screen Memo list
Detailed Screen
Memo display
Information
The page saved as a screen memo has the information at the time it was saved. This
might differ from the latest information on the site.
202
Delete
Delete
See page 201.
Delete selected
See page 201.
Delete all
See page 201.
Function Menu of the Detailed Screen Memo Display
Compose message
You can compose an i-mode mail message also by pressing
l(
). (See page 197)

Saving Image from Sites
Edit title
See page 201.
Protect ON/OFF
See page 202.
Save image
See page 203.
Add to phonebook
See page 94.
You can save the image displayed on a site or screen memo, and then set
it as the Stand-by display, Wake-up display, or another display.
You can save images, frames and marks for Deco-mail as well. You can
save up to 3,500 files in total sharing the memory space with other data
files, however, the number of files you can save decreases depending on
the data volume. (See page 534)
URL
You can display the URL of the screen memo.
Certificate
See page 197.
Sound effect
See page 208.
Retry
You can play back the animation or Flash movie from the
beginning.
When a part of the Flash movie is outside the display area,
the Flash movie might not be played back.
Others
YES
Save one image . . . . . You can save an image. Select an image to be saved.
Save some images . . You can save multiple images. Select multiple images to
be saved and press l(
).
Save all images . . . . . Among the images displayed on the site, you can save all
the images that can be saved at one time.
Save BG image. . . . . . You can save the image displayed as a background.
When you perform “Save image”, select an image to be saved.
YESSelect a destination folder.
When the confirmation display appears asking whether
to set it as a display, select “YES”.
For “Save some images”, and “Save all images”, select “Phone” or “microSD”.
When you select “Phone”, the images are sorted and saved into each folder;
Deco-mail pictograms are saved to the “Decomail-pictograms” folder, frames are
saved to the “Frame” folder, marks are saved to the “Stamp” folder, and the
others are save to the “i-mode” folder. See page 374 for the storage location
when you select “microSD”.
See page 205 when images are stored to the maximum.
Go to “Set display” on page 347.
203
i-mode/i-motion/i-Channel/i-concier
Delete
From a site display/Detailed Screen Memo display
i(
)Save imageSelect an item.
i-mode/i-motion/i-Channel/i-concier
Information
Up to 36 half-pitch characters are saved for a file name. When the file name is not
specified, a part of the downloaded URL or “imageXXX” (XXX denotes numerals) is
saved as the file name.
Even when an image is displayed on the site, it might not be displayed on the Picture
viewer after saving it to the FOMA terminal.
The image satisfying the following conditions is saved as a Deco-mail pictogram:
ポGIF or JPEG image
ポImage of 20 x 20 dots
ポImage without file restrictions ポImage of 6 Kbytes or less
The image satisfying the following conditions is saved as a frame or a mark:
ポTransparent GIF (except animation GIF)
・The extension is “ifm”.
ポImage of Stand-by (480 x 854) or smaller
Images of Stand-by (480 x 854), VGA (480 x 640), CIF (352 x 288),
QVGA (240 x 320), QCIF (144 x 176), and Sub-QCIF (96 x 128) are saved as
frames, and others are saved as marks.
You can save up to 100 Kbytes per image via i-mode, or 500 Kbytes per image via
Full Browser.
When you save multiple images or all images at one time, the background image
cannot be saved.
For Full Browser, you cannot save some images. You can save images in BMP
format and PNG format only to the microSD card.

Downloading Data from Sites
You can download the data and files from sites and save them to the
FOMA terminal. You can save some files directly to the microSD card.
You can store melody, PDF file, Chara-den image, Machi-chara image,
Kisekae Tool file, ToruCa file, template, dictionary, and schedule event,
etc.
204
■The maximum downloadable size
Maximum size
Maximum number of storable
Melody
Categories
100 Kbytes
3,500 max.※1
PDF file
2 Mbytes
3,500 max.※1
Chara-den image
Machi-chara image
100 Kbytes
2 Mbytes
3,500 max.※1
2,078 Kbytes
3,500 max.※1
ToruCa file
100 Kbytes
495 max.※1
Template (Deco-mail)
100 Kbytes
100 max.※2
Template (Decome-Anime)
100 Kbytes
100 max.※2
Dictionary
20 Kbytes
10
1 Mbyte
2,500
Kisekae Tool file
Schedule event
※1 The memory space is shared with other data files, and the number of files you can
save decreases depending on the data volume. (See page 534)
※2 The number of files you can save decreases depending on the data volume.
Call up a data downloadable siteSelect a data file.
The data file is downloaded. When downloading is finished, the data acquisition
completion display appears.
For PDF file, when downloading is finished, the PDF file is displayed.
With the PDF file that cannot be displayed unless you download all pages, the
confirmation display appears asking whether to download all pages. Select “YES”
to select the destination folder.
If you have not downloaded all pages of the PDF file, you can additionally
download the remaining pages by using “Download remain”.
See page 393 for how to save the displayed PDF file to the FOMA terminal. You
can save the PDF file containing pages that have not been downloaded or the
PDF file of which download was suspended midway as well.
The password entry display might be displayed depending on the PDF file. Enter
the password, and then select “OK”.
See page 391 for operations while PDF file is displayed.
2
SaveYESSelect a destination folder.
Chara-den image, template (Deco-mail), and schedule event is stored to the
FOMA terminal.
For Machi-chara image, Kisekae Tool file, and template (Decome-Anime), select
“Phone” or “microSD”.
For dictionary, select “”.
Select “Property” to display the information.
See page 205 when data files are stored to the maximum.
See page 201 to save a screen memo.
Select “YES” to set the downloaded data file to each
function.
Information
Some downloaded melodies might not be played back successfully.
When downloading Kisekae Tool file or Machi-chara image is
suspended
When you press l(
) to suspend downloading or when downloading is
suspended by an incoming call, the confirmation display appears asking whether to
resume downloading.
Select “YES” to resume downloading the remaining part. Select “NO” to show the data
acquisition completion display. You can save by selecting “Save pt.” from the data
acquisition completion display. When you select “Save pt.”, you can save it only to
“Phone”.
You can re-download the rest of the partially saved file from “Kisekae Tool” or
“Machi-chara” in “Data box”.
Search by i-mode
You can look for your favorite files on the site and download them. The
number of files you can save differs depending on the files you
download. You cannot change the site.
Each selection displaySearch by i-modeYES
Select a file.
The way of downloading differs depending on the file.
When the data files are stored to the maximum
If the maximum number of data files is stored or there is not enough memory when you
try to save the data files, the confirmation display appears asking whether to delete the
unnecessary file and save new one.
Perform this operation to save the following data:
ポImages
ポi-motion movies
ポMelodies
ポChara-den images
ポMachi-chara images
ポPrograms
ポi-ιppli programs
ポChaku-uta FullŽ music files ポPDF files
ポToruCa files
ポTemplates
ポScreen memos
ポKisekae Tool files
ポSchedule events
1. YESPut a check mark for data files to be deletedl(
)YES
As the data files except Chara-den images, templates, screen memos, and schedule
events are stored in the same storage area, you can select other files when deleting files.
Select a folder and put a check mark for the files to be deleted. “＊” appears on the folder
which contains the checked files.
“
” appears when you put it for the files whose amount of data is equal to memory
shortage.
You can put or clear check marks at a time by pressing i(
) and selecting
“Select all in page/Release in page”.
Each time you press d or i(
), or each time you press i(
) and
select “Change disp. mode”, you can switch display/nondisplay of the folder volume
and data volume.
When selecting a file in “MUSIC”, you can show the lower level folders by pressing
l(
).
Each time you press r, the upper level folder returns.
For programs, you need to delete many files when deleting other files because the data
volume per program is large.
If the maximum number of programs are stored when you execute “Move program” or
try to save an i-Îąppli program or ToruCa file, you need to delete at least one file which
belongs to the same type.
If there is a security-applied folder for screen memos, the confirmation display appears
asking whether to enable you to select screen memos in that security-applied folder.
When you select “YES”, you need to enter your Terminal Security Code.
The file set for another function is indicated by “★”.
See page 297 for deleting mail-linked i-Îąppli.
If you operate this when moving an i-Îąppli program from the microSD card to the
FOMA terminal, you cannot delete the i-Îąppli program with its data file on the IC card.
205
i-mode/i-motion/i-Channel/i-concier
For setting the melody as a ring tone, select an incoming type.
For creating a Deco-mail message or Decome-Anime message by using
template, see page 150 or page 153.
Information
You are separately charged a packet communication fee.
About “P-SQUARE”
Operations from Highlighted Information
You can download the pre-installed Kisekae Tool file, templates,
dictionaries, Chara-den images, and Deco-mail pictograms from the
“P-SQUARE” site (in Japanese only).
iMenu → メニューリスト (Menu List) → ケータイ電話メーカー
(Mobile Phone Maker) → P-SQUARE
You can easily make a call, send mail, display Internet web pages, start
1Seg, set TV Timer/Timer Recording using highlighted information
(phone numbers, mail addresses, URLs, melodies, images, and so on)
displayed on sites and in mail.
QR code for
accessing the site
Uploading Files to Sites
i-mode/i-motion/i-Channel/i-concier
You can upload JPEG or GIF images and i-motion movies stored in the
FOMA terminal to a site.
Bring up a file uploadable site参照 (Reference)
Picture or imotionSelect a file to be uploaded.
Procedure for uploading files differs depending on the site.
Information
You can upload up to 2 Mbytes in total.
You cannot upload files that are prohibited from output from the FOMA terminal to
other devices.
The Web To, Phone To/AV Phone To, Mail To, i-Îąppli To, Media To and Address Link
functions might not be available depending on the mail sent from a personal computer
or the site.
You might be able to use the Web To, Phone To/AV Phone To, Mail To, or i-Îąppli To
function using highlighted information other than a phone number, mail address or
URL.
In B Mode of 2in1, the Mail To function is not available.
The information is not highlighted in the Decome-Anime.
Phone To/AV Phone To Function
You can make voice calls, videophone calls or PushTalk calls by using
phone numbers or similar information displayed on sites and in mail.
The Phone To function to make a videophone call is called the AV Phone To function.
Select a phone number or similar information
Select a dialing type.
When you select “Select image”, select an image to be sent to other party during
a videophone call.
Select “SMS” to compose an SMS message to send to the phone number set as
the destination address. Go to step 3 on page 190.
The choices for dialing types may not be displayed when the phone number is
prefixed by “tel:” or “tel-av:”. Go to step 2.
Dial
To make an international call, select “Int’l dial assist”. (See page 61)
To set Caller ID Notification, select “Notify caller ID”. (See step 2 of “Set Caller ID
Notification when Making a Call” on page 58)
Information
You cannot make a call in Horizontal Open Style.
206
Mail To Function
Media To Function
You can send mail by using mail addresses or similar information
displayed on sites and in mail.
You can start 1Seg or set TV Timer/Timer Recording from the information
(links) displayed on sites and in mail.
Select a mail address or similar information.
The destination mail address is already entered in the address field.
Go to step 3 on page 146.
Web To Function
You can access Internet web pages, via i-mode or Full Browser, from
URL or similar information displayed on sites or in mail.
When the URL or similar one contains the information of i-mode or Full Browser,
you are connected via the function which corresponds to the information.
To cancel during connection, select “Cancel”. To cancel while obtaining a page,
press l(
).
i-Îąppli To Function
You can start i-Îąppli programs from URLs (links) displayed on sites and
in mail.
Select i-Îąppli informationYES
i-Îąppli starts.
Information
Even if i-mode mail text contains a link to start an i-Îąppli program, you cannot quote
the link when forwarding or replying to. Also, you cannot quote it when using
DOCOMO keitai datalink or infrared communication function.
1Seg or TV Timer/Timer Recording starts.
When the timer function starts, press l(
) to set TV Timer/Timer
Recording.
To change contents you want to set, go to step 1 of “TV Timer List” on page 263
or step 1 on page 264.
Information
You may not be able to use the Media To function even if information is highlighted.
Address Link Function
You can display a map from the postal address shown on a site or others
or can use the location information on the GPS compatible i-Îąppli
program. You can send the location information by i-mode mail as well.
Select the location information such as postal address
Select an item.
Read map . . . . . . . Starts a GPS compatible i-αppli program set by “Select map”
of “GPS settings”. Select “YES” to send the location
information.
Map/GPS Îąppli . . . Selects and starts a GPS compatible i-Îąppli program.
Paste to mail. . . . . Converts the location information into a URL and composes an
i-mode mail message with the URL pasted to the text.
Check loc. info . . . Displays the details of the selected location information.
207
i-mode/i-motion/i-Channel/i-concier
Select a URL or similar information
i-mode or Full BrowserYES
Select 1Seg informationYES

Setting i-mode
i-mode/i-motion/i-Channel/i-concier
ii-mode settingsDo the following operations.
Scroll
You can set the number of lines that are scrolled for when you
use Bo while displaying a site or screen memo.
Select the number of lines.
Character size
See “i-mode” on page 123.
Set image display
You can set whether to display images or Flash movies included
on sites or in screen memos.
ON or OFF
Set connection
timeout
See page 208.
Host selection
See page 209.
Automatic replay
set.
See page 214.
Use phone
information
To display a Flash movie while a site or screen memo is
displayed, the information in the FOMA terminal may be used.
You can select whether to permit the information to be used for
that case.
YES or NO

Setting Connection Timeout
Sound effect setting You can set whether to make an effect tone sound for when you
display a Flash movie while a site or screen memo is displayed.
ON or OFF
Information disp.
See page 217.
Doc. display
settings
See page 394.
i-mode arrival act
See page 87.
Reset last URL
See page 198.
Check settings
You can check each of “i-mode settings”.
208
Information

Even when “ON” is set, images might not be displayed correctly. In this case, “
” is
displayed.
When “OFF” is set, “
” is displayed and the data file is not received.
If you change this setting, “Set image display” of “User settings” of “1Seg” is also
changed.

The available information is as follows:
・Date and time set by “Set time”
ポReception level of radio waves
ポBattery level
・Sound volume set by “Phone” of “Ring volume”
・Language selected by “Select language”
ポModel name and serial number of FOMA terminal

Even when “ON” is set, the effect tones may not sound depending on Flash movies.
It may take long to obtain some sites. You can set the time to wait before
canceling obtaining. Obtaining is not canceled automatically when
“Unlimited” is set.
ii-mode settingsSet connection timeout
Select a timeout value.
Information
Even when you have set “Unlimited”, you may be disconnected owing to radio wave
conditions.
+m-8-1

Operating SSL Certificates
Changing a Host from i-mode
(ISP Connection Communication)
※Normally, you do not need to change this setting.
You can set the host (APN) to use for receiving services other than
i-mode (DOCOMO).
If you change this setting, you will not be able to use i-mode.
ii-mode settingsHost selection
Highlight and press l(
Enter your Terminal Security Code.
Certificate info
The subject name, author, validity period, and serial number of
the certificate are displayed.
You can check the certificate also by pressing Oo(
instead of i(
).
Valid/Invalid
The selected item is invalidated; then “
” changes to “
”.
When you select an invalid certificate, it will be validated.
If you set a certificate to invalid, you cannot display the sites with
that SSL certificate.
You cannot set “DOCOMO Cert 2” to “Invalid”.
Certificates used for SSL communication
Enter a host name.
You can enter up to 9 full-pitch/18 half-pitch characters.
Host number
Enter a host number.
You can enter up to 99 half-pitch alphanumeric characters.
Host address
Enter a host address.
You can enter up to 30 half-pitch alphanumeric characters.
Host address 2
Enter a host address 2.
You can enter up to 30 half-pitch alphanumeric characters.
Press l(
Certificate . . . . . . . . . . . . Certificates issued by the authenticating company and stored
in the FOMA terminal at purchase.
DOCOMO Certificate . . . Certificates required for connecting to the FirstPass Center or
FirstPass sites; they are stored on the UIM (green/white).
User Certificate . . . . . . . . Certificates downloaded from the FirstPass Center by
selecting “Client certificate” from the i-mode menu; they are
stored on the UIM (green/white).
).
Information
If you set any other host than i-mode, Pake-Houdai, Pake-Houdai Full or Pake-Houdai
Double are not applied.
209
i-mode/i-motion/i-Channel/i-concier
Do the following operations.
Host name
iOperate certificateCertificate
Highlight a certificate and press i(
Do the following operations.
If you select a stored host, the setting is changed to the selected one.
To delete the stored host, press i(
), select “Delete”, enter your
Terminal Security Code, and then select “YES”.


Setting FirstPass
i-mode/i-motion/i-Channel/i-concier
User certificates verify that you have subscribed to the FOMA service.
Downloaded user certificates are stored on the UIM for the use on
FirstPass sites.
When you cannot display a FirstPass site because the user certificate on
the UIM has expired or the required user certificate is not stored on the
UIM, you can request the issue and download the user certificate from
the FirstPass Center.
Access FirstPass Center
You can perform user certificate operations on the site of the FirstPass
Center site.
iOperate certificateClient certificateEnglish
You can request and download user certificates from the FirstPass Center.
This function is not available with the blue UIM.
The display and operating method displayed in the FirstPass Center site are subject to
change.
To show FirstPass sites, you can use Full Browser as well.
You cannot send/receive mail or receive Messages R/F while connected to the
FirstPass Center.
Set the date and time using “Set time” beforehand to connect to the FirstPass Center.
This function is not available overseas.
Client Authentication
With the FOMA terminal, server authentication and client authentication are performed
for safer data exchange. The site and your FOMA terminal exchange certificates,
check the other party’s certificate and verify each other for safer communication
service. By getting client authentication, you can enjoy more secure communication
services.
Client authentication is available via the Internet communication from the FOMA
terminal or via the Internet communication with the FOMA terminal connected to a
personal computer. To use the personal computer for the client authentication, you
need to install the FirstPass PC software from the provided CD-ROM.
For details, refer to “FirstPassManual” (PDF format) in the “FirstPassPCsoft” folder on
the CD-ROM. AdobeÂŽ ReaderÂŽ (version 6.0 or higher is recommended) is required to
see “FirstPassManual” (PDF format). If it is not installed in your personal computer,
install AdobeÂŽ ReaderÂŽ from the provided CD-ROM to see it.
For details such as how to use it, refer to “Adobe Reader Help”.
210
Site display for
the FirstPass Center
Information
Before using the FirstPass Center, select “The usage regulation (Japanese only)” and
carefully read the regulation.
You are not charged a packet communication fee for connecting to the FirstPass
Center.
Request Issue of User Certificate for Download
You need to request the issue of the user certificate before you download
it. When requesting the issue of your user certificate is completed,
download the user certificate. After the downloading is completed, it is
saved on the UIM and the FirstPass sites will be displayable.
Site display for the FirstPass Center
Request your certificateContinue
For an update, the message “Updating user certificate”
is displayed.
When you have already requested the issue of the user
certificate, select “Download your certificate” from the site display for the
FirstPass Center, go to step 3.
2
Enter your PIN2 code.
Enter your PIN2 code within 60 seconds. When the
code is not entered within 60 seconds, the connection is
cut off as an error entry.
See page 126 for PIN2 code.
Request Revocation of User Certificate
You can revoke the downloaded user certificate.
DownloadContinue
If you do not download the user certificate immediately, select “Menu”. From the
confirmation display asking whether to close the SSL page, select “YES”to
return to the site display for the FirstPass Center.
Information
Site display of the FirstPass CenterOther settings
Revoke your certificateYESEnter your PIN2 code.
Enter your PIN2 code within 60 seconds. When the code is not entered within 60
seconds, the connection is cut off as an error entry.
See page 126 for PIN2 code.
ContinueContinueContinue
Access Sites with User Certificate
You can connect to FirstPass sites with your user certificate.
Call up a FirstPass siteSelect an itemYES
Enter your PIN2 code.
Enter your PIN2 code within 60 seconds. When the code is not entered within 60
seconds, the connection is cut off as an error entry.
See page 126 for PIN2 code.
Information
If you try to connect to the FirstPass site without the user certificate or when its
available period is expired, the confirmation display appears asking whether to
continue connecting to the site. Select “NO”to return to the previous page. Download
or update the user certificate from the FirstPass Center site and then access the site
again.
The packet communication fee for accessing the FirstPass site is included in
Pake-Houdai, Pake-Houdai Full or Pake-Houdai Double.
Information
To use FirstPass after revoking a certificate, you need to apply again for your user
certificate to be issued and then download it.
See page 209 for how to view the download user certificate.

Changing Hosts for Certificate Issue
※Normally, you do not need to change this setting.
You can set the host for downloading the user certificate.
iOperate certificateCertificate host
Highlight  and press l(
).
If you select a stored host, the setting is changed to that host.
To delete the stored host, press i(
), select “Delete”, enter your
Terminal Security Code, and then select “YES”.
211
i-mode/i-motion/i-Channel/i-concier
Before downloading a new or an updated certificate, be sure to request the user
certificate to be issued. User certificates cannot be downloaded until the request for
issue has been made.
2
Default URL
Enter a default URL.
You can enter up to 100 half-pitch alphanumeric characters.
Host address
Enter a host address.
You can enter up to 99 half-pitch alphanumeric characters.
i-mode/i-motion/i-Channel/i-concier
Enter your Terminal Security Code
Do the following operations.
Press l(
).
■Before Using FirstPass
FirstPass is DOCOMO’s electronic authentication service. By using FirstPass, client
authentication is enabled, whereby the site and your FOMA terminal exchange
certificates, check the other party’s certificate and perform mutual authentication.
When requesting issue of a user certificate, carefully read “The usage regulation
(Japanese only)” on the display, agree to this, and then make the request.
You need to enter the PIN2 code to use the user certificate. Once you have entered
your PIN2 code, all subsequent operations will be deemed to be done by you, so be
careful not to let anyone else use your UIM or PIN2 code.
If your UIM is lost or stolen, “docomo Information Center” on the back page of this
manual can revoke your user certificate.
DOCOMO bears no obligation or responsibility with regard to the sites and
information provided by FirstPass sites. Please solve the problem between you and
FirstPass sites.
DOCOMO and the CA do not guarantee security when you use FirstPass and SSL,
so you should use them on your own judgment and responsibility.
212
i-motion
i-motion movies are composed of video, sound and music, and you can
play them back obtaining from i-motion compatible sites into your FOMA
terminal. You can set the i-motion movie for a ring tone.
Two types of i-motion movies are available as shown below. The type of
the obtained i-motion movie differs depending on the site or file.
You can save up to 10 Mbytes per i-motion movie.
Categories
Type
Playback type
Description
Standard
Plays back after
(normal) type obtaining
(can be saved)
Plays back while
obtaining
Plays back after obtaining all the data of an
i-motion movie.
Streaming
type
(cannot be
saved)
Plays back while obtaining an i-motion
movie. The data is deleted after playback, so
you cannot play it back again or save it to the
FOMA terminal.
Plays back while
obtaining
Plays back while obtaining an i-motion
movie. After obtaining, you can play it back
in the same way as “Plays back after
obtaining”.

Downloading i-motion from Sites
Play Back i-motion Obtained from a Site
Select an i-motion movie from an i-motion obtainable site
Play
Information
Depending on the accessed site or an i-motion movie, you might not be able to obtain
the data or play it back during obtaining, or play it back after obtaining. Also, you
cannot obtain an i-motion movie in ASF format.
See page 354 for the file formats of playable i-motion movies.
The playback stops when you close the FOMA terminal while playing back a standard
(normal) type of i-motion movie. The playback does not stop when you close the
FOMA terminal while playing back a streaming type of i-motion movie.
Even when you stop playing back the data of standard (normal) type while obtaining,
obtaining still continues.
Even if “Automatic replay set.” is set to “ON”, the data is not automatically played back
after obtaining when it is played back while obtaining.
For an i-motion movie that has restrictions on the number of playbacks, playable
period, or playable deadline, “
” is displayed at the head of the title. An i-motion
movie with the playable period restricted cannot be played back before or after the
restriction period. If you remove the battery and keep it aside for a long time, the date/
time information in your FOMA terminal might be reset. In that case, you cannot play
back the i-motion movie that has restrictions on the playable period and playable
deadline. See “imotion info” for checking the playback restrictions.
Save i-motion
You can save the obtained i-motion movie to your FOMA terminal. You
can save up to 262.1 Mbytes of files in total sharing the memory space
with other data files. (See page 529)
A data acquisition completion displaySaveYES
Select a destination folder.
See page 205 when i-motion movies are stored to the maximum.
When downloading i-motion movie is suspended
When you press l(
) to suspend downloading or when downloading is
suspended by an incoming call, the confirmation display appears asking whether to
resume downloading.
Select “YES” to resume downloading the remaining part. Select “NO” to show the data
acquisition completion display for a partially savable i-motion file. Select “Save pt.” to
save that file to any folder in “imotion” in “Data box”.
You can re-download the rest of the partially saved file from “Data box”.
The file name of the partially saved i-motion movie is “movie”.
When the playable period or playable deadline of the partially saved i-motion movie
has expired, you cannot download the remaining segments of the file. You can delete
the partially saved file when you try to download the file.
Information
Depending on the i-motion movie, you might not be able to save the obtained data to
the FOMA terminal.
Partially saved i-motion movies cannot be played back from Data Box.
213
i-mode/i-motion/i-Channel/i-concier
See page 354 for the operation during playback.
If an i-motion movie can be played back during obtaining, it will be played back
during obtaining.
If “Automatic replay set.” is set to “ON”, the i-motion movie will be played back
automatically after it is obtained.
Select “Property” to display the i-motion information. (See page 355)
See page 201 to save a screen memo.
Information
Depending on the line speed, line state, or radio wave conditions, the playback during
obtaining might be suspended or the images might be distorted. You can repeatedly
play back the standard (normal) type of i-motion movies after obtaining, but cannot
play back the streaming type of i-motion movies.

Setting Automatic Replay of i-motion
You can set whether to play back an i-motion movie automatically, for
when you have obtained a standard (normal) type of i-motion movie from
a site or have selected a screen memo which contains a standard
(normal) type of i-motion movie.
ii-mode settingsAutomatic replay set.
ON or OFF
i-mode/i-motion/i-Channel/i-concier
Information
Note that a streaming type of i-motion movie is played back automatically even if this
function is set to “OFF”.
i-Channel
This service distributes information such as news and weather forecast
to i-Channel mobile phones. The automatically received latest
information flows on the Stand-by display by tickers. You can read it on
the i-Channel list by pressing the i-Channel key. (See page 214)
Further, two types of channels, “Basic channel” provided by DOCOMO
and “Favorite channel” provided by IPs (Information Providers) are
available. You are not charged a packet communication fee for
auto-updates of “Basic channel” information.
You are charged a packet communication fee for auto-updates of
“Favorite channel” information which is enabled by registering your
favorite channels. For both of “Basic channel” and “Favorite channel”,
note that you are separately charged a packet communication fee for
browsing detailed information.
When you use the international roaming service, you are charged a
packet communication fee for both auto-update and browsing detailed
information.
i-Channel is a pay service which is available on a subscription basis (You need to
subscribe to i-mode to apply for i-Channel).
For details on i-Channel, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
The i-Channel service is provided in Japanese only.
214
Information
When the FOMA terminal is turned off or if radio wave conditions are bad such as
when it is out of the service area, you may not be able to receive information even if
you have contracted to the i-Channel service. In that case, select the channel for
unsigned subscribers that appears by pressing +Zo; then you can now receive
information, and tickers flow on the Stand-by display. If your FOMA terminal remains
in the default state, you may not be able to receive information. Press +Zo, and then
information is received and tickers flow on the Stand-by display.
To receive i-Channel information overseas, you are charged a communication fee by
channel (domestic talk-free service does not apply).
After you cancel the contract for the i-Channel service, the ticker setting is
automatically set to off.
If you cancel the contract for the i-mode service before you cancel the contract for the
i-Channel service, the ticker setting remains on.
Using i-Channel
When “Ticker ON/OFF” is set to “ON”, up to 10 ticker files for the latest
information flow repeatedly on the Stand-by display. If you want to know
more about the information, you can obtain the details from the Channel
list.
Press Zo.
Select an item (link).
The Channel list appears regardless of the “Ticker ON/
OFF” setting.
“ ” blinks during receiving information.
You cannot show the Channel list even by pressing o
from the horizontal Stand-by display.
Channel list
Information
The ring tone does not sound and the vibrator does not work even when information
comes in. In addition, the Call/Charging indicator does not light or flicker.
Information
Setting How Ticker is Displayed
ii-ChannelDo the following operations.
Channel list
Ticker ON/OFF
Ticker color set.
Reset i-Channel
). Press r
You can initialize the ticker information, set “Ticker ON/OFF” to
“ON”, and “i-Channel ticker” of “Private window” to “OFF”.
Enter your Terminal Security CodeYES
Information
You can perform “Ticker ON/OFF”, “Ticker font size set.”, “Ticker color set.”, “Ticker
scroll speed”, and “Reset i-Channel” for each mode of 2in1. However, i-Channel
information is initialized for all modes. Further, when 2in1 is deactivated, they become
common to the settings in A Mode.

In Public Mode (Drive Mode), or during Lock All, tickers are not displayed.

Tickers are not displayed after you execute “Reset i-Channel”. When the information
is automatically updated after that or when you press +Zo to receive the latest
information, tickers automatically flow.
i-concier
You can display the Channel list.
Go to step 2 on page 214.
You can set whether to display tickers on the Stand-by display.
ON or OFF
Ticker font size set. You can set the character size of tickers.
Extra large, Large, or Standard
You can check the ticker by pressing l(
to return to the former display.
Ticker scroll speed You can set the ticker flowing speed.
Select a speed.
You can check the ticker by pressing l(
to return to the former display.
). Press r
You can set the background color and font color of ticker.
Select a pattern.
You can check the ticker by pressing l(
). Press r
to return to the former display.
i-concier is a service that you can receive useful information such as rail
transit, road traffic, weather, or any events by character (Machi-chara
image) on the Stand-by display. From the site, you can use scheduler
more conveniently by downloading schedule events (i-schedule events)
such as match schedules of sports or the activity information of the
artist.
Also, you can save the Phonebooks entries, mail messages, still images,
schedule events (including i-schedule events), and ToruCa files to the
Data Storage Center easily. Downloaded i-schedule events and ToruCa
files can be updated by IPs (Information Providers).
215
i-mode/i-motion/i-Channel/i-concier
Tickers are not displayed in the following cases:
When the information is automatically updated after that or when you press +Zo to
receive the latest information, tickers automatically flow.
ｼWhen the UIM is replaced.
･When “Host selection” is changed
･When “Reset i-Channel” is executed.
･When “Reset settings” is executed.
･When “Initialize” is executed.
However, the information might not be automatically updated when “Host selection” is
changed. To receive the latest information, press +Zo to display the Channel list.
When “Host selection” is changed, the i-Channel connecting end is also changed. (In
ordinary, you do not need to change the setting.)
Depending on your usage state, you might receive information from i-Channel when
you display the Channel list.
Even if you change “i-mode” of “Character size”, the character size for the Channel list
might not change instantly.
i-mode/i-motion/i-Channel/i-concier
■Before Using i-concier
≥i-concier is pay service which is available on a subscription basis (You need to
subscribe to i-mode and Data Security Service to apply for i-concier).
≥The information in this service is provided by DOCOMO or IPs (Information
Providers). You are not charged a packet communication fee for receiving the
information provided by DOCOMO. You are charged a packet communication fee for
receiving the information provided by IPs (Information Providers).
≥You are separately charged a packet communication fee for browsing detailed
information.
≥When you use the international roaming service, you are charged a packet
communication fee for both auto-update and browsing detailed information.
≥Other than the service fee for using i-concier, you might be separately charged an
information fee depending on the i-schedule.
≥You are separately charged a packet communication fee for auto-updates of
i-schedule events, ToruCa files and Phonebook entries.
≥For details on i-concier, refer to “Mobile Phone User’s Guide [i-mode] FOMA
version”.
Select a message.
≥You can erase a message by pressing h from the Stand-by display or
highlighting a message and pressing r or h.
≥You can show the display for selecting desktop icons by highlighting a message
and pressing l(
). (See page 32)
Displaying i-concier Screen
m1i-concier1Select information.
≥An unread mark appears for unread information.
≥Schedule event files or ToruCa files might be attached
to information, or links are embedded in it for visiting a
site of more detailed or related information. Select
information with an unread mark to check these
contents.
Receive Information
When your FOMA terminal is in the service area, you can receive
information reports automatically.
When information comes in, “
” appears at the top of the display.
You can save up to 50 received information. They are overwritten from
the oldest one in order.
When information arrives, “
” blinks and contents of
information is displayed on the Stand-by display.
≥When multiple information received at a time, the latest one is displayed on the
Stand-by display.
≥Message telling information arrival appears while a display other than the
Stand-by display is shown or during horizontal Stand-by display. Select “Confirm”
to check the details of the information.
216
i-concier Menu
display
Display Schedule/ToruCa
i-concier Menu display1l(MENU)
1スケジューラへ (To scheduler) or
トルカへ (To ToruCa)
スケジューラへ (To scheduler)
. . . Displays the Calendar display. (See page 408)
トルカへ (To ToruCa)
. . . Displays the ToruCa Folder list. (See page 320)
Configuring i-concier Settings
i-concier Menu displayl(MENU)設定 (Settings)
Do the following operations.
ｉコンシェルとは？ You can display an expanation about i-concier.
(What is i-concier?)
ｉコンシェルイン You can set delivered contents of information, etc.
フォメーション設定
(i-concier
information setting)
その他共通設定
(Other common
seting)
i-mode/i-motion/i-Channel/i-concier
自動お預かり／更新 See page 141.
設定
(Automatic store/
update setting)
You can perform changing profile or setting when you use the
service overseas, etc.
お預かりデータ確認 See page 141.
(Check stored data)
お預かりデータ更新 See page 142.
(Update stored data)
お預かり通信履歴 See page 142.
(Stored data
exchanging history)
サービス各種手続き You can perform contract or cancel contract, etc.
(Service various
procedures)
サービスご利用にあ You can display the usage rules of i-concier.
たって
(For using the
service)
Information Display Setting
You can select whether to display received messages on the Stand-by display.
ii-mode settingsInformation disp. set
ON or OFF
217
218
Full Browser/PC Movie
Displaying Web Pages Designed for PC . . . . . 
Setting Full Browser . . . . . . . . . . . . . 
PC Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloading PC Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing PC Movies from Data Box . . . . . . . 
220
224
227
228
229
219

Displaying Web Pages Designed for PC
Full Browser/PC Movie
You can browse Internet web pages designed for PCs using the Full
Browser function. You can display even the Internet web pages that
cannot be correctly displayed by i-mode. However, you cannot display or
correctly display some Internet web pages.
If you change the style while running Full Browser, the display
automatically switches between the vertical display and the horizontal
display. When you switch it manually, select “CHG wide scr. mode” from
the Function menu.
The data such as Home URL or Bookmarks registered via Full Browser cannot be
used via i-mode. The contents set by Full Browser are invalid for i-mode, either.
Note that you are charged a high communication fee for the massive data
communication such as browsing Internet web pages having many images or
downloading data files. For details on the packet communication fee, refer to “Mobile
Phone User’s Guide [i-mode] FOMA version”.
You can browse Internet web pages composed of frames. You can select a frame to
display it as well. (See page 223)
You can display SSL/TLS※-compatible pages via Full Browser.
※SSL and TLS are the methods of safer data communication using authentication/
encryption technology to protect your privacy. SSL/TLS pages prevent
eavesdropping and information alteration during communication by exchanging
encrypted data files. Further, server authentication prevents web spoofing, thus
making your personal information such as credit card number or postal address
exchanged safer.
220
iFull BrowserSelect an item.
Home. . . . . . . . . . . . Displays an Internet web page set as Home URL.
Bookmark. . . . . . . . Displays an Internet web page stored in Bookmark.
(See page 200)
Last URL. . . . . . . . . Displays an Internet web page you viewed last time.
Go to location . . . . Displays an Internet web page by entering a URL.
(See “Displaying Internet Web Pages” on page 199)
Full Browser settings
. . . . . . . . . . . . . . . . . Configures Full Browser settings. (See page 224)
When “Access setting” is set to “No”, the confirmation display appears asking
whether to start Full Browser. Highlight “Yes” and select “OK” to switch setting of
“Access setting”, then Full Browser starts up.
Further, you can connect to a site for signing up a packet flat-rate service via
i-mode by selecting “To sign up a packet flat-rate service, click here”.
To end Full Browser, press h with an Internet web page displayed and select
“YES”.
Information
You can display up to 1 Mbyte per page. However, you can download the Flash movie
up to 10 Mbytes.
It may take long to display some Internet web pages.
You cannot use the following functions in Full Browser:
ポPhone To function
ポScreen memos
ポPDF files
Full Browser Display
Full display
Full Browser Display
About operation by the pointer
PC Mode
Vo or 3
Bo
” by pressing Oo in Drag Mode, then you can move the
1. The pointer switches to “
contents by grabbing it.
2. Move the contents by pressing Mo, and press Oo to let the contents off and the
pointer returns to “
”.
Press and hold Oo for at least one second to release Drag Mode.
(Vo is not available during
displaying the pointer.)
Scroll display
■When you switch to Drag Mode while displaying the pointer
You can switch to Drag Mode by pressing and holding Oo for at least one second during
displaying the pointer. By switching to Drag Mode, you can operate
Drag-Mode-compatible contents. In Drag Mode, the pointer is displayed as “
”.
Information
The operation differs depending on the contents.
You cannot operate other than the operations of contents in Drag Mode.
You cannot drag in Phone Mode.
Mo
(Mo during displaying the
pointer)
Switch to Drag Mode
Oo(for at least one second)
(Only while displaying the pointer)
Scroll display page by page  or m(
)/c(
To scroll to the top/end of the page, (for at least
one second), m(
)/c(
) (for at least
one second) or a/s
221
Full Browser/PC Movie
When “Display pointer” of “Pointer/scroll” in “Full Browser settings” is set to “ON”, the
pointer appears in Full Browser display, then you can scroll the display or select contents
and others by the pointer.
You can scroll not only upward/downward but also obliquely when scrolling the display
by the pointer.
(Co is not available during
displaying the pointer.)
Forward to next page
Each time of pressing switches between the normal
display and the full display.
Phone Mode
Co or 1
PC Mode
Display Bookmark Folder list 0
Key operation
Operation
Reload
Phone Mode
Enlarge/Reduce display size 7 to reduce the display size, 8 to display in
standard size, 9 to enlarge the display size
■Operations for the Full Browser display
Return to previous page
Key operation
Operation
 
… : Displaying in the multiwindow
…Window number/Number of windows
… : During communication in another window
: During communication in another frame
… : Phone Mode
: PC Mode
… : Displaying an enlarged frame
…
: Normal pointer
: While selecting a link
: During obtaining or processing data
: Drag Mode
: While dragging an object
: While selecting a text input area
: While selecting a Flash movie
: While selecting a operatable Flash movie
: While selecting a text-inputable Flash movie
Switch Display Mode
Two modes, “Phone mode” and “PC mode”, are available for the Full
Browser display.
Full Browser/PC Movie
iFull BrowserFull Browser settings
Display Mode settingPhone mode or PC mode
Phone mode
. . . .Displays an Internet web page to fit in the display width of the FOMA terminal.
You do not need to scroll sideways; you can browse Internet web pages only
by scrolling upward and downward.
PC mode
. . . .Displays an Internet web page in the same format as when it is displayed on
your personal computer in 800 (width) x 1400 (height) dots. You can browse
Internet web pages by scrolling upward, downward, and sideways.
When you show an Internet web page, you can switch the display modes each
time you select “Change disp. mode” of “Settings” from the Function menu.
Use Operation Mode
Press l(
) from the Full Browser display to switch to “Operation
mode”. The operation palette is displayed in Operation Mode, and you
can move to the previous/next page or enlarge/reduce the display size.
No: Moves to the previous/next page.
Bo: Enlarges/reduces the display size.
You can display the guide of key operation when you press
i(
) in Operation Mode.
222
Open in the Multiwindow
You can simultaneously open up to five Internet web pages via Full
Browser.
You can switch the simultaneously opened Internet web pages to show one by one.
Full Browser displayi(
Select an item.
)Open new window
Bookmark. . . .Opens a new window to show an Internet web page stored in
Bookmark. (See page 200)
Enter URL. . . .Opens a new window to show an Internet web page by entering a
URL. (See “Displaying Internet Web Pages” on page 199)
Home. . . . . . . .Opens a new window to show an Internet web page set as Home
URL.
Link . . . . . . . . .Opens a new window to show a page of the link highlighted on the
Full Browser display.
See page 223 for how to switch or close the window.
Information
Some Internet web pages have links configured to open in new windows. When you
open such a link, the new window opens even if you do not perform above operations.
Display a Page Composed of Frames
Function Menu of Full Browser Display
You can display Internet web pages composed of frames. You can select
a frame, and enlarge each selected frame for displaying.
From an Internet web page composed of frames
Use Mo to highlight a frame, and press Oo(
Set as home URL
You can set the displayed Internet web page as Home
URL.
YES
Display home
You can display the Internet web page set as Home URL.
).
In Phone Mode, use Bo
to highlight a frame.
To return to the display for
all frames, press r or
select “Others” and select
“All frames” from the
Function menu.
Bookmark
Enlarged by frame
Information
When an Internet web page has many divided frames, you might not be able to open
all frames. “
” is added to the frames that you could not open.
Switch from i-mode to Full Browser
You can switch to Full Browser to show the Internet web pages
incorrectly displayed by i-mode.
While a page to be shown is displayed in Full Browser
i(
)InternetSwitch to FBOK
Information
Add bookmark
See page 200.
Bookmark
See page 200.
Enter URL
You can enter a URL to display an Internet web page.
Select a text box.
Go to step 2 of “Displaying Internet Web Pages” on
page 199.
The URL of displayed site is entered beforehand.
Open new window
See page 222.
CHG/close window
Change window
You can switch the windows while displaying the Internet
web pages in the multiwindow.
Select a window.
Close window
You can close the window while displaying the Internet
web pages in the multiwindow.
YES
Reload
The contents on the Internet web page is updated to the
latest ones.
Save image
See page 203.
Settings
You cannot correctly display some Internet web pages.
223
Full Browser/PC Movie
All frames
Home
Change disp. mode
See page 222.
Certificate
See page 197.
CHG wide scr. mode/
RLS wide scr. mode
You can switch vertical display and horizontal display.
Retry
You can play back the displayed animation from the
beginning.
Set full display
See page 225.
Key guide
Pointer/scroll
Display pointer
See page 225.
Speed
See page 225.
Focus while scroll
See page 225.
Information

The number of characters of the URL you can paste to the text is up to 512 half-pitch
characters. If the URL contains 512 half-pitch characters or more, you cannot paste it.
Zoom
See page 225.
Set image display
See page 225.
Sound effect
See page 225.
You can upload JPEG or GIF images or i-motion movies stored in the
FOMA terminal to an Internet web page.
Cookie setting
You can set whether to validate cookies.
Go to step 1 of on page 226.
Delete Cookies
You can delete cookies.
Go to step 1 of “Delete Cookies” on page 227.
Cookie
Full Browser/PC Movie
You can display the guide of key operation of Full Browser
display.
Referer setting
You can set whether to send a referer.
Go to step 1 of “Referer Setting” on page 227.
Others
All frames
You can return to the display for all frames from the display
for the enlarged frame.
Compose message
You can compose an i-mode mail message with the URL
of the displayed Internet web page pasted to the text.
Go to step 2 on page 146.
Add desktop icon
See page 31.
Change CHR code
See page 197.
Page info
You can display information of the displayed Internet web
page.
URL or Title
224
Upload Files
Bring up a file uploadable siteOperate 参照(Reference)
and othersPicture orimotion
Select a file to be uploaded.
Procedure for uploading files differs depending on the site.
Information
You can upload up to 2 Mbytes in total.
You may not be able to upload files depending on the Internet web page.
You cannot upload the files whose output from FOMA terminal is prohibited.

Setting Full Browser
iFull BrowserFull Browser settings
Do the following operations.
Home URL
You can set Home URL.
Select the URL fieldEnter a URLOK
See page 222.
Sound effect setting
Set full display
You can set whether to display the Full Browser display in full
display.
ON or OFF
You can set the sound volume of effect tones or sounds of the
Flash movies included in Internet web pages.
Select a sound volume level.
Auto NW trans.
You can set whether to communicate when the transmission
is made automatically while displaying Internet web page.
Select an item.
YES . . . .Communicates automatically.
NO . . . . .Does not communicate automatically.
Notify . . .The confirmation display appears asking whether to
communicate each time the FOMA terminal tries to
communicate automatically.
Even if “Notify” is set, when you select “YES (default)” on the
confirmation display, the setting switches to “YES”.
Use phone info
To display a Flash movie while an Internet web page is
displayed, the information in the FOMA terminal may be used.
You can select whether to permit the information to be used
for that case.
YES or NO
Pointer/scroll
Display pointer
You can set whether to display the pointer on Full Browser
display.
ON or OFF
Speed
You can set scroll speed.
High speed, Medium speed, or Low speed
Focus while scroll
You can set whether to highlight links while scrolling.
ON or OFF
Zoom
You can set the display size of the Internet web page.
From the Function menu of the Full Browser display, you can
enlarge/reduce the display size by each page.
Select a display size.
In PC Mode, you can select a display area by “Select disp.
area” from the Function menu of the Full Browser display.
Access setting
You can set whether to use Full Browser.
Yes. . . . Uses Full Browser.
No. . . . . Displays the cautions at the start of Full Browser.
Check the cautions, highlight “Yes” and then select
“OK”, then the setting switches to “Yes”, and Full
Browser becomes available.
Set image display
You can set whether to display images.
ON or OFF
PC Movie auto-play
You can set whether to automatically play back the
downloaded type of PC movies while obtaining.
ON or OFF
Cookie
Cookie setting
See page 226.
Delete Cookies
See page 227.
Referer setting
See page 227.
Script setting
You can set whether to validate JavaScript. JavaScript is a
simple program language that runs on Internet web pages. It
is widely used to create Internet web pages with movements.
When “Valid” is set, you can use the JavaScript function to
browse Internet web pages in Full Browser.
Valid or Invalid
Window Open Guard
You can set whether to prevent a new window from opening
automatically by JavaScript.
Valid or Invalid
225
Full Browser/PC Movie
Display Mode setting
Reset last URL
Check settings
You can erase the URL of the Internet web page you viewed
last.
YES
You can check respective Full Browser settings.
Full Browser/PC Movie
Information

When “Off” is set, the operation of flash movies is not available.

If you replace the UIM with a new one when “Yes” is set, the setting switches to “No”.

Even when “ON” is set, images might not be displayed correctly. In this case, “
” is
displayed.
When “OFF” is set, “
” is displayed and the data file is not received.

Even when “ON” is set, the effect tones may not sound depending on Flash movies.

The available information is as follows:
・Date and time set by “Set time”
・Language selected by “Select language”