Panasonic Mobile Communications 208013A UMTS/ GSM Cellular Mobile with RFID User Manual Part 2

Panasonic Mobile Communications Development of Europe Ltd UMTS/ GSM Cellular Mobile with RFID Part 2

User Manual Part 2

Calls41Use Call Records and Make a CallStand-by display1++Co(Received calls) or +Vo(Redial)1Select a call record1+d1Press +h to end the call.The phone number you dialed or you received call from is stored as a record. You can make a call using the record.DOCOMO videophones conform to 3G-324M, standardized by the international standard 3GPP. You cannot connect to the videophone that uses a different format.・ 3GPP (3rd Generation Partnership Project):This is the regional standards organization for developing common technical specifications for third-generation mobile telecommunication systems (IMT-2000).・3G-324M:This is the international standard for the third generation of mobile videophones.・ This FOMA terminal supports only 64 kbps communication speed of the videophone. You cannot talk on the videophone at 32 kbps communication speed.This FOMA terminal has no inward-facing camera. Therefore, the image sent to the other party is a Chara-den image, still image, or image being shot by the outward-facing camera. You cannot send the image through your camera because the FOMA terminal has neither outward-facing camera nor inward-facing camera.・・PointMaking a Call
Calls42When You cannot Answer a CallActivate Record Message Play Back Record MessageSelect an answer message■Rec.msg/voice memoRecord message settingLIFEKIT+mONEnter a ring time (seconds).■Rec.msg/voice memoPlay/Erase msg.LIFEKIT+mSelect a record message.■Put a Call on Hold during a Call/while Ringing<While ringing> While ringing1+h1Press +d to release hold and answer the call.The caller is charged for the call even while the call is on hold.<During a call> During a call1+Oo( )1Press +d to release hold and answer the call.The caller is charged for the call even while the call is on hold.・・For Videophone Record MessageSelect “Play/Erase VP msg.”.Press i ( ) and select “YES” to erase a record message being played back.As callers’ messages are recorded to your FOMA terminal, you are not charged for recording/playback operations.By activating Record Message in advance, you can record a caller’s voice/video message when you cannot answers a call.When a call comes in, an answer message is played back after the ring time elapses. Then, the caller can record a voice/video message.・Record Message is not available when the FOMA terminal is out of the service area or turned off and cannot receive calls.PointStand-by display Stand-by display
Calls43Setting Manner ModeTo ReleasePerform the same operation.When you activate Manner Mode, the vibrator instead of the sound notifies you of incoming calls, etc.Press and hold for at least one second from the Stand-by display.■“ ” appears on the Stand-by display.Just by pressing a key, you can set to mute the tones from the FOMA terminal such as a ring tone and keypad sound.
Calls44Using Public ModeOnce you activate Public Mode (Drive Mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a place where you should refrain from speaking on the phone. Then the call is disconnected.Once you activate Public Mode (Power Off), the guidance is played back for a call coming in while the power is off, telling that you cannot answer the call as you are currently in a place where the power should be turned off (hospital, airplane, around priority seat in a train, etc.). Then the call is disconnected.Public Mode (Drive Mode)Public Mode (Power Off)Enter +a+2+5+2+5+1.■ -d■To DeactivateStand-by display1a25250 1+dTo DeactivatePerform the same operation.“ ” appears on the Stand-by display. When a call comes in during Public Mode (Drive Mode), the ring tone does not sound and the record is stored in “Received calls”. The alarm does not sound even when the specified alarm time comes.Stand-by displayPress and hold for at least one second from the Stand-by display.■
Calls45Using Network ServicesAvailable Network ServicesThe following are the DOCOMO network services available from the FOMA terminal.The network services are not available when you are out of the service area or out of reach of radio waves.For details, refer to “Mobile Phone User’s Guide [Network Services]”.For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual.・・・Service Application Monthly feeVoice Mail Service Required ChargedCall Waiting Service Required ChargedCall Forwarding Service Required FreeNuisance Call Blocking Service Not required FreeCaller ID Notification Service Not required FreeCaller ID Display Request ServiceNot required FreeDual Network Service Required ChargedService Application Monthly feeEnglish Guidance Not required FreeMulti Number Required Charged2in1 Required ChargedPublic Mode (Drive Mode) Not required FreePublic Mode (Power Off) Not required FreeOFFICEED Required ChargedMelody Call Required Charged“OFFICEED” is a pay service which is available on a subscription basis. For details, visit the DOCOMO-enterprise-oriented website (in Japanese only). http://www.docomo.biz/d/212/“Deactivate” does not mean that the contract for Voice Mail Service, Call Forwarding Service or other services is canceled.You can store new network services in the menu when they are provided by DOCOMO.In this manual, a brief outline for each network service is described following the procedure using the menus of the FOMA terminal.・・・・
Calls46Using Network Services (Continued)■Voice Mail ServiceActivateStand-by display1+m1SET./SERVICE1+NW services1Voice mail1+Activate1+YES1+YES1Enter a ring time (seconds).DeactivateStand-by display1+m1SET./SERVICE1+NW services1Voice mail1+Deactivate1+YESPlay messagesStand-by display1+m1SET./SERVICE1+NW services1Voice mail1+Play messages1Play (voice mail) or Play (videophone)1+YES 1Operate following the voice guidance.■Call Waiting ServiceActivateStand-by display1+m1SET./SERVICE1+NW services1Call waiting1Activate1+YESDeactivateStand-by display1+m1SET./SERVICE1+NW services1Call waiting1+Deactivate1+YESAnswer an Incoming Call during a CallEach time you press +d, you can switch the parties you can talk with.■Call Forwarding ServiceActivateStand-by display1+m1SET./SERVICE1+NW services1Call forwarding1+Activate1Register fwd number 1Enter the phone number of forwarding destination1Set ring time1Enter a ring time (seconds)1Activate1+YESDeactivateStand-by display1+m1SET./SERVICE1+NW services1Call forwarding1Deactivate1YES・・・・・・・・
Calls47Services Available for FOMA TerminalAvailable services Phone numberDirectory assistance service (Charges apply: guidance fee + call fee)※Listed phone numbers only can be given. (No prefix) 104Telegrams (Telegram charges apply) (No prefix) 115Time check (Charges apply) (No prefix) 117Weather forecast (Charges apply) City code of the desired area + 177Emergency calls to police (No prefix) 110Emergency calls to fire station and ambulance (No prefix) 119Emergency calls for accidents at sea (No prefix) 118Disaster messaging service (Charges apply) (No prefix) 171Collect calls (Charges apply: guidance fee + call fee) (No prefix) 106When using the collect call (106), the recipient is charged a call fee and handling fee ¥90 (¥94.5 with tax) for each call. (As of December 2008)When using the directory assistance service (104), you are charged a guidance fee ¥100 (¥105 with tax) plus a call fee. For whom having weak eyesight or handicapped arms, the guidance is available charge free. For more details, dial 116 (NTT inquiry counter) from land-line phones. (As of December 2008)This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/118/119, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations. It might happen that your correct location is not detected by emergency-response agencies depending on the location you dialed or radio wave conditions. When you do not notify your phone number by call such as by adding “184”, your location information and phone number are not notified. However, when an mergency-response agency has judged that the location information and phone number should be detected because of emergency priority such as protection of human life, they might be notified regardless of your setting. The region and timing “Emergency Location Report” is introduced vary depending on the preparation of respective emergency-response agencies.When you make a call at 110/119/118 from the FOMA terminal, tell an operator that you are calling from a mobile phone and then precisely notify your phone number and actual location. Further, remain still while talking to prevent your call from being disconnected. Do not turn off the power immediately after the call, but instead make sure that your phone can receive calls for at least 10 minutes.You might not be connected to regional police/fire station depending on the area from where you call. If this happens, use public phones nearby or land-line phones.If you use “Call Forwarding Service” for the land-line phone and specify a mobile phone as the forwarding destination, callers may hear ringback tone even when the mobile phone is busy, out of the service area, or the power is turned off depending on the settings of the land-line phone/mobile phone.Note that the FOMA terminal is not available to 116 (NTT inquiry counter), Dial Q2, Message Dial, and credit call services. (You can use auto credit call to the FOMA terminal from land-line phones or public phones.)・・・・・・・Point
Calls48Enter each item.■Phone+Xo(for at least one second) +l()■Enter a name.Enter a reading.Enter a phone number.Enter a mail address.Storing a Phonebook EntryStand-by displayThe display for entering a name appears. Enter a name and proceed.You can store a postal address and birthday as well.You can also separately set a ring tone or mail ring tone for the party of the Phonebook entry by pressing +Vo to show the “Settings” display.
Calls49Making a Call by Using the Phonebook+XoAll?-dSelect a Phonebook entry.■Tab ReadingNamePhone number+OoPress +h to end the call.■Delete a Phonebook EntryStand-by display1+Xo1Select a Phonebook entry1+i( )1Delete data1This phonebook1YESWhen an entry contains multiple phone numbers, press +Mo to select a desired phone number.Stand-by displayPress +No to display the Phonebook entries in the tab at the right or left.From the second search, this selection display does not appear. To show it again, press +r.
Calls50-d-0(for at least one second)Country/area codeArea code (city code)Destination phone numberDial Press -h to end the call.■When the area code (city code) begins with “0”, enter it except for the “0”. However,include “0” when making a call to some countries or regions such as Italy.Making an International CallYou can use WORLD CALL when you make an international call from Japan.■WORLD CALLWORLD CALL is the international call service available from DOCOMO mobile phones.When you have signed up for FOMA service, you have contracted to use “WORLD CALL” (except those who have applied not to use it).You can make calls to about 240 countries and regions.The WORLD CALL charges are added to your monthly bill for FOMA service.The application/monthly fee is free of charge.The service is not available with some billing plans.Contact “docomo Information Center” on the back page of this manual for inquiries about WORLD CALL.When using international carriers other than DOCOMO, contact them.The caller ID might not be notified, or might not be displayed correctly depending on the carrier. In this case, you cannot make a call by using Received Calls.・・・・・・・Press l( ) to make an international videophone call.Stand-by display
Calls51You can use International Roaming (WORLD WING) when you make a call overseas.■International Roaming (WORLD WING)International Roaming (WORLD WING) is a service that enables you, using local carrier’s networks, to make calls or to communicate even in the foreign countries which are out of the service area of the FOMA network. There are communication systems of 3G Network, GSM Network, and GPRS Network as the main networks overseas.At the time of purchase, the FOMA terminal is set to automatically switch networks in foreign countries.Overseas use fee is added to your monthly bill. You might be requested, however, to pay the fee with the bill for the following month or later depending on the overseas carrier of your stay. Note that the usage amount to be paid for a month might not be charged in the same month.When a call comes in during international roaming, the call is forwarded from Japan. The caller is charged a call fee to Japan and the receiver is charged a receiving fee.Refer to the following booklets before you use your FOMA terminal overseas: ・“Mobile Phone User’s Guide [International Services]” ・“Mobile Phone User’s Guide [Network Services]” ・“海外ご利用ガイド (Guide for Overseas Use)” pre-installed in the “i-mode” folder of “My documents” in Data Box・・・・・Using Overseas
Calls52■ Available services overseasCommunication Services 3G GSM GPRSVoice call※1○ ○ ○Videophone call※1○ － －SMS ○ ○ ○i-mode※2○ － ○i-mode mail ○ － ○i-Channel※2 ※3○ － ○i-concier※4○ － ○Packet communication by connecting with a personal computer ○ － ○○: Available　—: Not available※1 In B Mode or Dual Mode of 2in1, you cannot make calls from Number B.※2 You need to make overseas usage settings.※3 You need to make i-Channel settings. You are charged a packet communication fee each time you receive i-Channel messages (including the basic channel).※4 You need to make overseas usage settings for i-concier. You are charged a packet communication fee each time you receive information.Using Overseas (Continued)Some services are not available depending on the carrier or network. For connectable countries, regions, and carriers, refer to the DOCOMO Global Service web page.The packet communication fee for the overseas use differs from the one for the use in Japan.・・Point
Calls53-dPress -h to end the call.■Making a Call to Outside the Country You Stay (Including Japan)Enter “81” as a country/area code when you make an international call to Japan or you make a call to another WORLD WING user.When the area code (city code) begins with “0”, enter it except for the “0”. However, include “0” when making a call to some countries or regions such as Italy.・・PointMaking a Call to a Person in the Country You StayEnter a destination phone number.■Press -h to end the call.■-dPress l( ) to make an international videophone call.Press l( ) to make a videophone call.Stand-by display -0(for at least one second)Country/area codeArea code (city code)Destination phone numberStand-by display
Mail54Using i-mode MailOnce you subscribe to i-mode, you can exchange e-mails over the internet as well as among i-mode phones.You can attach images, etc., besides mail text. You can easily compose and send expressive mail messages using Deco-mail pictograms.For details on i-mode mail, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. +l()■Enter each item.■ +l()■Enter a mail address.Enter a subject.Select a file such as an image.Enter text.Sending i-mode Mail+lYou can enter pictograms by pressing +m() while composing a text message.Stand-by display
Mail55Using i-mode MailDisplaying Received i-mode MailSelect a folder■Select an i-mode mail message.■+lInboxBy pressing and holding +l for at least on second, you can check with the i-mode Center for a new mail message or Message R/F.When you receive an i-mode mail message or Message R/F, the following display appears.Check New MessagesNumber of itemSelect an item to show the display for selecting a folder.When you receive an i-mode mail message, “” appears on the Stand-by display.+OoEarly Warning “Area Mail”As an Area Mail message, you can receive information such as emergency earthquake alerts distributed from the Japan Meteorological Agency. When you receive an Area Mail message, “ ” lights. The received content of some messages is automatically displayed. To erase the displayed content, press +Oo.SMSThe destination address is a phone number, so you can send messages even if you do not know the mail address of the destination FOMA terminal.Message R/FThis service automatically delivers news, etc. Message R (Request) and Message F (Free) are available for message type.Reply to i-mode MailPress l( ) while i-mode mail is displayed.Enter text and then send.Stand-by display
Site Access56Using i-modei-mode is a service that enables you, using the display of the FOMA terminal supporting i-mode (i-mode phone), to use online services such as site (program) access, Internet access, and i-mode mail.i-mode is a pay service that is available on a subscription basis.For details on i-mode, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.■Before Using i-modeContents of sites (programs) and web pages (Internet web pages) are generally protected by copyrights law. Data such as text and images that you obtained to the i-mode phone from sites (programs) and Internet web pages can be used for personal entertainment but cannot be used in whole or in part, as it is or after modification, for commercial purposes or sent as e-mail attachments or output from your i-mode phone to other devices, unless you have permission from the copyright holders.If you replace the UIM with another one or turn on the power with the UIM not inserted, you cannot display/play back files, depending on the model, such as still images/movies/melodies obtained from sites, attached files (still images/movies/melodies and other files) sent/received by mail, screen memos, or Messages R/F.When the file whose display and/or playback is restricted by the UIM is set for the Stand-by display or specified ring tone, the FOMA terminal works with the default contents when you replace the existing UIM with new one or turn on the power with the UIM not inserted.■About “P-SQUARE”You can download the pre-installed i-appli programs, Chara-den images, Machi-chara images, Kisekae Tool files, templates, dictionaries, and Deco-mail pictograms from the “P-SQUARE” site (in Japanese only).iMenu → メニューリスト (Menu List) → ケータイ電話メーカー (Mobile Phone Maker) → P-SQUARE・・・・・QR code for accessing the site
Site Access57Using i-modeAccessing Sites+iIt blinks during communication.Repeat selecting items (links) to display a desired site.Return to Previous Page/Go to Next PagePress +Co to return to the previous page and press +Vo to go to the next page.iMenuChange to iMenu in EnglishStand-by display1++i1iMenu1EnglishStand-by display
Site Access58Using i-appliSelect a software program.■+i(for at least one second)Downloading i-appliStarting i-appliSelect a software program from an i-appli obtainable site.■OK YES■The following i-appli programs are pre-installed:ケータイTOOL<GLOBAL> (Keitai Tool <GLOBAL>)ズーキーパー DX Ver.P (ZOOKEEPER DX Ver.P)Gガイド番組表リモコン (G Guide Program List Remote Control)iD 設定アプリ (iD Setting Application)DCMX クレジットアプリ (DCMX Credit Application)楽オク出品アプリ2 (Rakuoku Exhibition Application 2)地図アプリ (Map Application)ｉアプリバンキング (i-appli Banking)※For how to operate, refer to Help for each software program.※ You can delete the pre-installed i-appli programs. You can re-download them from the “P-SQUARE” site.■ Deadlines for re-download services ・ “ケータイTOOL<GLOBAL> (Keitai Tool <GLOBAL>)”, “ズーキーパー DX Ver.P” (ZOOKEEPER DX Ver.P): the end of January, 2013※ The re-download service might be halted or closed without notice even in the service period.・・・・・・・・Stand-by display“i-appli” is a software program for i-mode mobile phones. By downloading※ various software programs from the i-mode site, you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network.※You are separately charged a packet communication fee.The packet communication fee for the overseas use differs from the one for the domestic use. For details on i-appli, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.・・
Site Access59Using i-motioni-motion is a data file composed of video, sound and music, and you can play it back after downloading from an i-motion compatible site into your FOMA terminal. You can also set it for a ring tone.Downloading i-motionSelect an i-motion movie from an i-motion obtainable site.■YESSelect a folder.■Playing Back i-motion+mimotionDATA BOXSelect a folder■Select a file.■Stand-by displaySave
Site Access60Using i-ChannelSelect each channel to browse its detailed information.Connecting to i-ChannelThis service distributes information such as news and weather forecast to i-Channel mobile phones. The automatically received latest information flows on the Stand-by display by tickers. You can read it on the i-Channel list by pressing the i-Channel key.There are two kinds of i-Channel as below:“Basic channel” ......... Provided by DOCOMO (Your are not charged a packet communication fee for auto-updates of information.)“Favorite channel” ..... Provided by IPs (Information Providers) (You are separately charged a packet communication fee for auto-updates of information.)Note that you are separately charged a packet communication fee for browsing detailed information for both of “Basic channel” and “Favorite channel”.When you use the international roaming service, you are charged a packet communication fee for both auto-update and browsing detailed information.i-Channel is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-Channel).For details on i-Channel, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.・・TickerStand-by display +Zo■
Site Access61i-concier is a service that a character (Machi-chara image) on the Stand-by display supports your life as a “concierge”.With i-concier, you can receive the information of train status or other daily necessities, download schedule events/i-schedule events, and save/update the Phonebook entries, ToruCa files, and schedule events/i-schedule events.■Before Using i-concieri-concier is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-concier).If you have not subscribed to Data Security Service but will newly subscribe to i-concier, you will subscribe to Data Security Service as well as i-concier.There are two kinds of information; one is sponsored by DOCOMO and the other is by IPs (Information Providers). You are not charged a packet communication fee for DOCOMO-sponsored information when receiving it. You are separately charged a packet communication fee for IP-sponsored Information when receiving it.You are separately charged a packet communication fee for using detailed information.While using the international roaming service, you are charged a packet communication fee for both receiving information and browsing detailed information. The packet communication fee for the overseas use differs from the one for the domestic use.Depending on the contents (information, i-schedule, and others), you might be separately charged an information fee besides the i-concier monthly fee.You are separately charged a packet communication fee for auto-updates of i-schedule, ToruCa, and Phonebook.For details on i-concier, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.・・・・・・・・Using i-concier
Site Access62Receiving Information Displaying i-concier FilesSelect a message.■When you receive information, “ ” blinks and the content is displayed on the Stand-by display.■i-CONCIER+mSelect a piece of information.■Stand-by displayUsing i-concier (Continued)
Site Access63Using Full BrowserEnter a URL.■You can access an Internet web page.+iGo to locationFull Browser<NEW>OKOperations on the Full Browser display-1 Return to previous page.-3 Go to next page.-7 Reduce display size.-8 Display in standard size.-9 Enlarge display size.You can browse Internet web pages designed for PCs using the Full Browser function.Note that you are charged a high communication fee for the massive data communication such as browsing Internet web pages having many images or downloading data files. For details on the packet communication fee, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.You can browse Internet web pages composed of frames. You can select a frame to display it as well. You can display SSL/TLS※ -compatible pages via Full Browser. ※ SSL and TLS are the methods of safer data communication using authentication/encryption technology to protect your privacy. SSL/TLS pages prevent eavesdropping and information alteration during communication by exchanging encrypted data files. Further, server authentication prevents web spoofing, thus making your personal information such as credit card number or postal address exchanged safer.・・・Stand-by displayYou might not correctly display some Internet web pages.・Point
Camera/1Seg/Music64Shooting with CameraFor still imageFocusPress Xo to focus.ZoomPress ++No to adjust the magnification.Finder DisplayCamera mode: Still image shooting (photo) mode: Movie shooting (movie) modeSettingsYou can change settings by the corresponding key.1: Brightness ( )-2: White balance ( )3: Photo mode ( )-4: Image quality ( )5: Image size (-)6: High sensitivity ( )Zo: Focus ( )Start the camera.■Record■Save■The camera function is not available.Stand-by display
Camera/1Seg/Music65Switching Camera Modes Viewing a ImageFrom the Function menu of the Finder display, you can switch to “Photo mode”, “Movie mode”, “Continuous mode”, and “Bar code reader”.<Example> Recording a movie in the Movie modeDo not leave the FOMA terminal with the lens pointing direct to the sunlight. Pixels may be discolored or burns may result.When the battery level is low, you may not be able to save shot still or movies.You need to obtain a microSD card separately to use the functions related to the microSD card.・・・Finder display ++Oo( )■ ++Oo( )■ ++Oo( )■Recording starts.Recording ends. ++i( )■CHG camera-modeMovie modeFinder display ++m( )■Select a still image.■
Camera/1Seg/Music66Shooting with Camera (Continued)Scanning a Bar Code■When scanning with Bar Code ReaderTake the code as large as possible within the guide frame.Autofocus works when you scan a code about 10 cm or more away from it. When you scan a code in the out-of-focus state, the recognition rate lowers.Scan so that the camera is in parallel with the code.・・・■QR CodeQR Code is one of the 2-dimensional codes that denotes data in the vertical and horizontal directions.Kanji, katakana, alphanumeric characters, and pictograms are displayed when you scan it. Some QR codes have image or melody information.“株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan this QR code with the FOMA terminal.・Guide frame<Example> Access P-SQUARE by using QR code on the right1. Stand-by display1+m1LIFEKIT1Bar code reader2. Scan code1Fit a QR code to the guide frame and press +Xo1+Oo()3. Select a URL1i-mode1YESQR code for accessing the siteYou can use the outside camera to scan QR codes and store them as data files.From the scanned data, you can make calls, compose i-mode mail messages, access Internet web pages, and so on.
Camera/1Seg/Music671Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving audio and video. For viewing fee of NHK, contact NHK.※ You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).※ For details on the 1Seg service, browse the web pages as follows: The Association for Promotion of Digital Broadcasting From personal computers: http://www.dpa.or.jp/english/ From i-mode: http://www.dpa.or.jp/1seg/k/ (In Japanese only)※ 1Seg is not available overseas.■Radio waves1Seg is one of the broadcasting services receiving radio waves (broadcasting waves) different from that used for the FOMA services.1Seg might not work correctly in the following places:Places far away from the radio tower that transmits broadcasting wavesMountain-ringed regions or behind buildingsIn tunnels, underground, or recesses of buildings※ The reception conditions might be improved by moving your FOMA terminal away from or close to you, or by moving yourself to another place.■Battery levelIf you try to start 1Seg when the battery is low, the battery alert tone sounds, and the confirmation display appears asking whether to start it. In addition, when the battery level becomes low while you are watching or recording a 1Seg program, the battery alert tone sounds.When you do nothing from the confirmation display for about one minute, 1Seg automatically terminates.■Messages on the display when you use 1Seg for the first timeWhen you use 1Seg for the first time after purchase, the Exemption Clause Confirmation display appears. If you select “NO” from the confirmation display which appears after pressing +Oo(), the same confirmation display does not appear afterward.The Exemption Clause Confirmation display also appears when you replace the UIM with another one or remove the UIM.・・・・・Watching 1Seg
Camera/1Seg/Music68Watching 1Seg (Continued)Setting Channels+mChannel settingSelect area1SEG Select an area■YESSelect a prefecture■When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”.Broadcasting stations set by prefecture are stored to a channel list.Select a stored channel list and then select a broadcasting station to watch a 1Seg program.Press and hold for at least one second from the Stand-by display to start 1Seg. Press and hold for at least one second.When you have not stored any channel list, select “OK” and execute Channel Setting.■・Stand-by display
Camera/1Seg/Music69Viewer DisplayAirwave Reception Level (estimate)VideoCaptionData BroadcastingSound VolumeOperation Mode : Video Mode : Data Broadcasting ModeChannel (Remote-control number)Program Information (outline)Switch Display/CaptionDuring Video RecordingThis is displayed while you are watching a 1Seg program.About the Operation on the Viewer DisplayBX+Bo: Sound volume adjustment+No: Channel selection+Oo() (for at least one second): Video recordingThe recorded video is saved to the microSD card (DATA BOX → 1Seg → Video).・
Camera/1Seg/Music70Music&Video Channel is a service which automatically delivers up to about one-hour programs at night by just setting your favorite music programs in advance. Further, you can enjoy high-quality movie program of up to about 30 minutes. Programs are updated periodically and you can enjoy the delivered programs at your convenient time such as on commuting.For the details on Music&Video Channel, refer to “Mobile Phone User’s Guide [i-mode FOMA version]”.■ Before using Music&Video Channel Music&Video Channel is a pay service which is available on a subscription basis. (To apply for Music&Video Channel, you need to subscribe to Pake-hodai, Pake-hodai full or Pake-hodai double besides i-mode.)Other than the service fee for using Music&Video Channel, you might be separately charged an information fee depending on the program.If you insert the UIM to the Music&Video Channel incompatible FOMA terminal after you subscribe to Music&Video Channel, you cannot use Music&Video Channel Service. Note that the service fee applies unless you cancel the Music&Video Channel subscription.If you cancel your i-mode contract, program files in the Downloaded Program folder might be deleted.You cannot set or obtain programs during international roaming.※ Take procedures to halt the distribution of programs before going abroad. Then, after homecoming, resume receiving distribution.※ Note that you are charged a packet communication fee for the i-mode access if you try to set or obtain programs during international roaming.・・・・・・Using Music&Video Channel

Navigation menu