Panasonic of North America 96NKX-HNC600 DECT 6.0 Outdoor Camera User Manual 5 258223 KX HNC600 UPCS FCC15D

Download:
Mirror Download [FCC.gov]
Document ID	2304420
Application ID	dRzMjsv3Mj9ec9nxfHsLeA==
Document Description	Test Report
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	110.16kB (1376944 bits)
Date Submitted	2014-06-24 00:00:00
Date Available	2014-08-09 00:00:00
Creation Date	2017-10-22 07:03:31
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 07:03:31
Document Title	5_258223 KX-HNC600 UPCS FCC15D
Document Creator	PDFCreator Version 1.7.2
Document Author:	sveinsenfr

Report No.
258223-5
Test Report
Product
UPCS Transceiver in Outdoor Camera
Name and address of the
applicant
Panasonic Corporation of North America
Name and address of the
manufacturer
Panasonic System Networks Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku
Fukuoka 812-8531, Japan
Model
KX-HNC600
Rating
120 V AC (Mains)
Trademark
Panasonic
Serial number
Additional information
DECT 6.0
Tested according to
FCC Part 15, subpart D
Isochronous UPCS Device, 1920 – 1930 MHz
Industry Canada RSS 213, Issue 2
2 GHz License-exempt Personal Communications Service Devices (LE-PCS)
Order number
258223
Tested in period
2014.05.07 to 2014.05.14
Issue date
2014.05.26
Name and address of the
testing laboratory
FCC No: 994405
IC OATS: 2040D-1
Instituttveien 6
Kjeller, Norway
TEL: (+47) 22 96 03 30
FAX: (+47) 22 96 05 50
Prepared by [Frode Sveinsen]
Approved by [G.Suhanthakumar]
This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations
expressed within this report are not part of the current accreditation. This report was originally distributed electronically
with digital signatures. For more information contact Nemko.
Template version: B
Nemko Norway
Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway
TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.com
ENTERPRISE NUMBER NO974404532
nemko.com/no
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
CONTENTS
1.1
1.2
1.3
1.4
1.5
1.6
1.7
INFORMATION ................................................................................................................................. 3
Tested Item........................................................................................................................................ 3
Description of Tested Device............................................................................................................. 3
Exposure Evaluation .......................................................................................................................... 3
Test Environment .............................................................................................................................. 4
Test Engineer(s) ................................................................................................................................ 4
Test Equipment ................................................................................................................................. 4
Other Comments ............................................................................................................................... 4
2.1
2.2
TEST REPORT SUMMARY .............................................................................................................. 5
General .............................................................................................................................................. 5
Test Summary ................................................................................................................................... 6
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
3.21
3.22
TEST RESULTS ................................................................................................................................ 7
Power Line Conducted Emissions ..................................................................................................... 7
Coordination with fixed microwave .................................................................................................. 10
Digital Modulation Techniques ........................................................................................................ 10
Labeling Requirements ................................................................................................................... 10
Antenna Requirement...................................................................................................................... 11
Channel Frequencies ...................................................................................................................... 11
Automatic Discontinuation of Transmission .................................................................................... 12
Peak Power Output ......................................................................................................................... 13
Emission Bandwidth B ..................................................................................................................... 16
Power Spectral Density ................................................................................................................... 19
In-Band Unwanted Emissions, Conducted ...................................................................................... 22
Out-of-band Emissions, Conducted................................................................................................. 24
Carrier Frequency Stability .............................................................................................................. 30
Frame Repetition Stability ............................................................................................................... 31
Frame Period and Jitter ................................................................................................................... 31
Monitoring Threshold, Least Interfered Channel ............................................................................. 33
Threshold Monitoring Bandwidth ..................................................................................................... 35
Reaction Time and Monitoring Interval ............................................................................................ 36
Time and Spectrum Window Access Procedure ............................................................................. 38
Acknowledgements and Transmission Duration ............................................................................. 39
Dual Access Criteria Check ............................................................................................................. 41
Alternative Monitoring Interval ......................................................................................................... 45
4.1
4.2
4.3
4.4
4.5
TEST SETUPS ................................................................................................................................ 46
Frequency Measurements ............................................................................................................... 46
Timing Measurements ..................................................................................................................... 46
Conducted Emission Test................................................................................................................ 46
Power Line Conducted Emissions Test ........................................................................................... 46
Monitoring Tests .............................................................................................................................. 47
TEST EQUIPMENT USED .............................................................................................................. 48
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 2 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
1.1
INFORMATION
Tested Item
Name :
Model name :
FCC ID :
Industry Canada ID :
Serial number :
Hardware identity and/or version:
Software identity and/or version :
Tested to IC Radio Standard (RSS) :
Test Site IC Reg. Number :
Frequency Range :
Number of Channels :
Type of Modulation :
Conducted Output Power :
Antenna Connector :
Number of Antennas :
Antenna Diversity Supported :
Power Supply :
1.2
Panasonic
KX-HNC600
ACJ96NKX-HNC600
216A-KXHNC600
PNLB2371xx
SW401
RSS-213 Issue 2, RSS-GEN Issue 3
IC 2040D-1
1921.536 – 1928.448 MHz
5 RF Channels, 5x12 = 60 TDMA Duplex Channels
Digital (Gaussian Frequency Shift Keying)
62 mW (Peak)
None
No
AC Adaptor Model: PNLV236
Description of Tested Device
The EUT is an Indoor Camera with DECT Transmitter and is an initiating device as described in ANSI C63.17
and is designed to operate together with a DECT fixed part (i.e. a base station), which is the responding
device.
1.3
Exposure Evaluation
The EUT is a fixed device and the user manual contains a statement that it should be installed at least 20cm
away from any persons.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 3 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
1.4
Test Environment
Temperature:
20.7 – 21.8 °C
Relative humidity:
36 - 43 %
Normal test voltage:
120 V AC (with AC Adaptor PNLV236)
The values are the limit registered during the test period.
1.5
Test Engineer(s)
Frode Sveinsen
Thanh Tran
1.6
Test Equipment
See list of test equipment in clause 6.
1.7
Other Comments
The Monitoring and Time and Spectrum Window Access tests were performed with Test Set-Up 6 (Ref.
clause 5). A clock signal from the companion device was used to synchronize the Pulse Pattern Generator
and the Spectrum Analyzer to the start of the DECT time window. The EUT was limited by administrative
commands to operate on only two frequency carriers. For the tests where the EUT was required to operate
on only one frequency carrier, one carrier was blocked by applying a CW interfering signal from RF
Generator 3. The Pulse Pattern Generator was used to apply time synchronized interference to time windows
where this was required.
This EUT supports Least Interfered Channel procedure (LIC), the Monitoring and Time and Spectrum
Window Access tests were conducted as specified for EUTs that support LIC procedure.
All tests except Power-Line Conducted Emissions were performed in conducted mode with a temporary
antenna connector.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 4 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
TEST REPORT SUMMARY
2.1
General
All measurements are traceable to national standards.
The tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with
FCC CFR47 Part 15D for Isochronous UPCS Devices and Industry Canada RSS-213 Issue 2 / RSS-GEN
Issue 3.
All tests were conducted is accordance with ANSI C63.4-2009 and ANSI C63.17-2006. Antenna Gain tests
were made in a 3m fully-anechoic chamber.
A description of the test facility is on file with the FCC and Industry Canada.
New Submission
Production Unit
Class II Permissive Change
Pre-production Unit
PUB
Equipment Code
Family Listing
THIS TEST REPORT APPLIES ONLY TO THE ITEM(S) AND CONFIGURATIONS TESTED.
Deviations from, additions to, or exclusions from the test specifications are described in “Summary of Test Data”.
Nemko Group authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the
company’s employees only. Any reproduction of parts of this report requires approval in writing from Nemko Group.
Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such
third parties. Nemko Group accepts no responsibility for damages suffered by any third party as a result of decisions made or actions
based on this report.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 5 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
2.2
Test Summary
Name of test
FCC CFR 47
Paragraph #
IC RSS-213
Paragraph #
Verdict
Power Line Conducted Emission
15.107(a)
15.207(a)
6.3
RSS-GEN 7.2.2
Complies
Coordination with fixed microwave
15.307(b)
N/A
Complies
Digital Modulation Techniques
15.319(b)
6.1
Complies
Labeling requirements
15.19(a)(3)
RSS-GEN 5.2
Complies
Antenna Requirement
15.317, 15.203
RSS-GEN 7.1.2
Complies
Channel Frequencies
15.303
Complies
Automatic discontinuation of transmission
15.319(f)
4.3.4(a)
Complies
Emission Bandwidth
15.323(a)
6.4
Complies
In-band emissions
15.323(d)
6.7.2
Complies
Out-of-band emissions
15.323(d)
6.7.1
Complies
Output Power and Antenna Gain
15.319(c)(e),
15.31(e)
6.5 and 4.1(e)
Complies
Power Spectral Density
15.319(d)
4.3.2.1
Complies
Carrier frequency stability
15.323(f)
6.2
Complies
Frame repetition stability
15.323(e)
4.3.4(c)
Complies
Frame period and jitter
15.323(e)
4.3.4(c)
Complies
Monitoring threshold, Least interfered channel
15.323(c)(2);(5); (9)
4.3.4(b)
Complies
Monitoring of intended transmit window and
maximum reaction time
15.323(c)(1)
4.3.4(b)
Complies
Threshold monitoring bandwidth
15.323(c)(7)
4.3.4(b)
Complies
Reaction time and monitoring interval
15.323(c)(1);(5); (7)
4.3.4(b)
Complies
Access criteria test interval
15.323(c)(4);(6)
4.3.4(b)
N/A
Access Criteria functional test
15.323(c)(4);(6)
4.3.4(b)
N/A
Acknowledgements
15.323(c)(4)
4.3.4(b)
Complies
Transmission duration
15.323(c)(3)
4.3.4(b)
Complies
Dual access criteria
15.323(c)(10)
4.3.4(b)
Complies
Alterative monitoring interval
15.323(c)(10);(11)
4.3.4(b)
N/A
Spurious Emissions (Radiated)
15.319(g)
15.109(a)
15.209(a)
4.3.3
RSS-GEN 7.2.3
N/A
Only applies for equipment that transmits unacknowledged control and signaling information
The client declares that the tested equipment does not implement this provision
Not required if the Conducted Out-of-Band Emissions test is Passed
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 6 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.1
TEST RESULTS
Power Line Conducted Emissions
Para. No.: 15.207 (a)
Test Performed By: Thanh Tran
Date of Test: 13-May-2014
Measurement procedure:
ANSI C63.4-2009 using 50 µH/50 ohms LISN.
Test Results:
Complies
Measurement Data:
See attached graph, (Peak detector).
Highest measured value (L1 and N):
(Plots show maximum of Phase L1 and N)
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 7 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Standby Mode with PNLV236 Adaptor, 120V 60Hz:
Frequency
Level
Af
Limit
Margin
Det
Position
Verdict
[MHz]
[dBuV]
[dB]
[dBuV]
[dB]
0.395000
39.00
10.20
58.00
19.00
QP
L1
Pass
0.370000
29.00
10.20
48.50
19.50
AV
L1
Pass
0.395000
36.50
10.20
48.00
11.50
AV
L1
Pass
0.445000
20.20
10.20
47.00
26.80
AV
L1
Pass
0.480000
11.20
10.20
46.30
35.10
AV
L1
Pass
0.740000
22.10
10.20
46.00
23.90
AV
L1
Pass
0.760000
19.40
10.20
46.00
26.60
AV
L1
Pass
0.785000
17.40
10.20
46.00
28.60
AV
Pass
0.815000
19.90
10.20
46.00
26.10
AV
Pass
0.840000
18.90
10.20
46.00
27.10
AV
Pass
0.945000
15.10
10.20
46.00
30.90
AV
Pass
1.155000
17.10
10.20
46.00
28.90
AV
Pass
1.180000
15.00
10.20
46.00
31.00
AV
Pass
1.240000
11.70
10.20
46.00
34.30
AV
L1
Pass
1.455000
13.90
10.20
46.00
32.10
AV
L1
Pass
22.325000
14.30
11.30
50.00
35.70
AV
Pass
Det
Position
Verdict
[Pass/Fail]
Transmit Mode with PNLV236 Adaptor, 120V 60Hz:
Frequency
Level
Af
Limit
Margin
[MHz]
[dBuV]
[dB]
[dBuV]
[dB]
0.395000
39.20
10.20
58.00
18.80
QP
L1
Pass
0.750000
30.30
10.20
56.00
25.70
QP
Pass
0.170000
16.00
10.10
55.00
39.00
AV
L1
Pass
0.370000
28.40
10.20
48.50
20.10
AV
L1
Pass
0.395000
36.50
10.20
48.00
11.50
AV
L1
Pass
0.570000
17.30
10.20
46.00
28.70
AV
Pass
0.750000
9.00
10.20
46.00
37.00
AV
Pass
0.785000
18.00
10.20
46.00
28.00
AV
Pass
[Pass/Fail]
0.830000
6.90
10.20
46.00
39.10
AV
Pass
0.865000
17.00
10.20
46.00
29.00
AV
Pass
0.950000
12.00
10.20
46.00
34.00
AV
Pass
1.695000
10.70
10.20
46.00
35.30
AV
L1
Pass
1.925000
12.20
10.20
46.00
33.80
AV
L1
Pass
8.670000
15.10
10.60
50.00
34.90
AV
L1
Pass
12.200000
13.00
10.70
50.00
37.00
AV
L1
Pass
18.000000
11.30
11.00
50.00
38.70
AV
L1
Pass
22.205000
15.20
11.30
50.00
34.80
AV
Pass
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 8 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Level [dBµV]
80
70
60
50
40
30
+ ++
20
10
150k
300k
500k
1M
Frequency [Hz]
2M
3M
5M
7M
10M
30M
MES 258223N_Qp
MES 258223N_Av
MES 258223N
LIM EN 55022 V QP
LIM EN 55022 V AV
Standby Mode with PNLV236 Adaptor, 120V 60Hz
Level [dBµV]
80
70
60
50
40
30
20
10
+ +
150k
300k
500k
+ +
1M
Frequency [Hz]
2M
3M
5M
7M
10M
30M
MES 258223N_Qp
MES 258223N_Av
MES 258223N
LIM EN 55022 V QP
LIM EN 55022 V AV
Transmit Mode with PNLV236 Adaptor, 120V 60Hz
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 9 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.2
Coordination with fixed microwave
The affidavit from UTAM, Inc. is included in the documentation supplied by the applicant:
Yes
No
Requirement, FCC 15.307 (b):
Each application for certification of equipment operating under the provisions of this Subpart must be
accompanied by an affidavit from UTAM, Inc. certifying that the applicant is a participating member of UTAM,
Inc. In the event a grantee fails to fulfill the obligations attendant to participation in UTAM, Inc., the
Commission may invoke administrative sanctions as necessary to preclude continued marketing and
installation of devices covered by the grant of certification, including but not limited to revoking certification.
3.3
Digital Modulation Techniques
The EUT uses Multi Carrier / Time Division Multiple Access / Time Division Duplex and Digital GFSK
modulation. For further details see the operational description provided by the applicant.
Requirement, FCC 15.319(b):
All transmissions must use only digital modulation techniques.
3.4
Labeling Requirements
See separate documents showing the label design and the placement of the label on the EUT.
Requirements FCC 15.19
The FCC Identifier shall be displayed on the label, and the device(s) shall bear the following statement in a
conspicuous location on the device or in the user manual if the device is too small:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The label itself shall be of a permanent type, not a paper label, and shall last the lifetime of the equipment.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 10 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.5
Antenna Requirement
Does the EUT have detachable antenna(s)?
Yes
No
If detachable, is the antenna connector(s) non-standard?
Yes
No
The tested equipment has only integral antennas. The conducted tests were performed on a sample with a
temporary antenna connector.
Requirement: FCC 15.203, 15.204, 15.317.
3.6
Channel Frequencies
UPCS CHANNEL
FREQUENCY (MHz)
Upper Band Edge
1930.000
0 (Highest)
1928.448
1926.720
1924.992
1923.264
4 (Lowest)
1921.536
Lower Band Edge
1920.000
Requirement: FCC 15.303
Within 1920 -1930 MHz band for isochronous devices.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 11 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.7
Automatic Discontinuation of Transmission
Does the EUT transmit Control and Signaling Information?
YES
TYPE OF EUT :
RESPONDING DEVICE
INITIATING DEVICE
NO
The following tests simulate the reaction of the EUT in case of either absence of information to transmit or
operational failure after a connection with the companion device is established.
Number
N/A
Test
EUT Reaction
Verdict
Pass
Power removed from EUT
Switch Off EUT
N/A
Pass
Hook-On by EUT
N/A
Pass
Power Removed from Companion Device
Pass
Switch Off Companion Device
N/A
Pass
Hook-On by Companion Device
N/A
Pass
- Connection breakdown, Cease of all transmissions
- Connection breakdown, EUT transmits control and signaling information
- Connection breakdown, Companion Device transmits control and signaling information
- Not Applicable (Neither EUT nor Companion Device have On/Off switch or can perform Hook-On)
Requirements, FCC 15.319(f)
The device shall automatically discontinue transmission in case of either absence of information to transmit
or operational failure. These provisions are not intended to preclude transmission of control and signaling
information or use of repetitive codes used by certain digital technologies to complete frame or burst
intervals.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 12 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.8
Peak Power Output
Test Method:
ANSI C63.17, clause 6.1.2.
Test Results: Complies
Measurement Data:
Maximum Conducted Output Power
Channel No.
Frequency
(MHz)
Maximum
Conducted
Output Power
(dBm)
Maximum
Antenna
Gain
(dBi)
Maximum
Radiated
Output Power
(dBm)
1921.536
17.6
0.0*
17.6
1924.992
18.0
0.0*
18.0
1928.448
17.8
0.0*
17.8
*Antenna gain value is declared by the manufacturer.
Limit:
Conducted: 100 µW x SQRT(B)
where B is the measured Emission Bandwidth in Hz
FCC 15.319(c)(e):
20.76 dBm (119 mW)
RSS-213, Issue 2:
20.51 dBm (113 mW)
The antenna gain is below 3 dBi, no reduction in transmit power is necessary.
Requirements, FCC 15.319(c)(e), RSS-213, Issue 2
Peak transmit power shall not exceed 100 microwatts multiplied by the square root of the emission bandwidth
in Hertz.
The peak transmit power shall be reduced by the amount in decibels that the maximum directional gain of the
antenna exceeds 3 dBi.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 13 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Conducted Peak Output Power
Lower Channel
Upper Channel
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 14 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Middle Channel
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 15 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.9
Emission Bandwidth B
Test Method:
ANSI C63.17, clause 6.1.3.
Test Results: Complies
Measurement Data:
Channel No.
Frequency
(MHz)
26 dB Bandwidth B
(kHz)
1921.536
1420
1928.448
1410
Channel No.
Frequency
(MHz)
99% Bandwidth
(kHz)
1924.992
1266
Channel No.
Frequency
(MHz)
6 dB Bandwidth
(kHz)
1921.536
N/A
1928.448
N/A
Channel No.
Frequency
(MHz)
12 dB Bandwidth
(kHz)
1921.536
N/A
1928.448
N/A
Requirements, FCC 15.323(a)
The 26 dB Bandwidth B shall be larger than 50 kHz and less than 2.5 MHz.
Requirements, RSS-213 Issue 2, clause 6.4
The 99% Bandwidth shall be larger than 50 kHz and less than 2.5 MHz.
No requirements for 6 and 12 dB Bandwidth, these values are only used for testing Monitoring Bandwidth if
the Simple Compliance test fails (ANSI C63.17, clause 7.4).
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 16 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Emission Bandwidth B, Lower Channel
Emission Bandwidth B, Upper Channel
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 17 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
99% Bandwidth, Middle Channel
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 18 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.10
Power Spectral Density
Test Method:
ANSI C63.17, clause 6.1.5.
Test Results: Complies
Measurement Data:
Channel No.
Frequency
(MHz)
Power Spectral Density
(dBm)
1921.536
1.1
1928.448
1.3
Averaged over 1000 sweeps.
Requirements, FCC 15.319(d)
The Power Spectral Density shall be less than 3 mW (4.77 dBm) when averaged over at least 100 sweeps.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 19 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Power Spectral Density
Lower Channel:
Overview
Averaged, 1000 Sweeps
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 20 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Upper Channel:
Overview
Averaged, 1000 Sweeps
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 21 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.11
In-Band Unwanted Emissions, Conducted
Test Method:
ANSI C63.17, clause 6.1.6.1.
Test Results: Complies
Measurement Data:
See plots.
Requirements, FCC 15.323(d):
B < f ≤ 2B :
at least 30 dB below max. permitted peak power
2B < f ≤ 3B :
at least 50 dB below max. permitted peak power
3B < f ≤ UPCS Band Edge : at least 60 dB below max. permitted peak power
Middle Channel
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 22 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
In-Band Unwanted Emissions, Conducted
Lower Channel
Upper Channel
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 23 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.12
Out-of-band Emissions, Conducted
Test Method:
ANSI C63.17, clause 6.1.6.2.
Test Results: Complies
Measurement Data:
See plots.
Requirements, FCC 15.323(d):
f ≤ 1.25MHz outside UPCS band :
1.25MHz ≤ f ≤ 2.5MHz outside UPCS band :
f ≥ 2.5MHz outside UPCS band :
≤ -9.5dBm
≤ -29.5 dBm
≤ -39.5 dBm
Lower Channel:
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 24 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Out-of-Band Emissions, Conducted
Lower Channel:
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 25 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Out-of-Band Emissions, Conducted
Upper Channel:
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 26 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Out-of-Band Emissions, Conducted
Upper Channel:
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 27 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Out-of-Band Emissions, Conducted
Upper Channel:
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 28 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Out-of-Band Emissions, Conducted
Upper Channel:
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 29 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.13
Carrier Frequency Stability
Test Method:
ANSI C63.17, clause 6.2.1.
Test Results: Complies
Measurement Data:
The Frequency Stability is measured with a R&S CMD60 DECT Tester. The CMD60 was logged by a
computer programmed to get new readings as fast as possible (about 3 readings per second) over the noted
time period or number of readings. The peak-to-peak difference was recorded and the mean value and
deviation in ppm was calculated.
The Carrier Frequency Stability over Power Supply Voltage and over Temperature is measured with a
Frequency Domain Analyzer in histogram mode.
Carrier Frequency Stability over Time at Nominal Temperature
Average Mean Carrier
Frequency (MHz)
Max. Diff.
(kHz)
Min. Diff.
(kHz)
Max. Dev.
(ppm)
Limit
1926.726782
7.793
5.690
0.5
±10 ppm
Deviation ppm = ((Diff.) / Mean Carrier Freq.) x 10
Deviation (ppm) is calculated from 3000 readings.
Frequency Stability over Power Supply Voltage at Nominal Temperature
Voltage
Measured Carrier
Frequency (MHz)
Difference
(kHz)
Deviation
(ppm)
Vnom
1924.979167
85% of Vnom
1924.976549
-1.1
-0.6
115% of Vnom
1924.977240
-1.6
-0.8
Limit
±10 ppm
Deviation ppm = ((Mean – Measured Frequency) / Mean) x 10
Frequency Stability over Temperature
Temperature
Measured Carrier
Frequency (MHz)
Difference
(kHz)
Deviation
(ppm)
T = +20 °C
1924.979167
T = -20 °C
1924.978079
-2.6
-1.4
T = +50 °C
1924.977585
-1.9
-1.0
Limit
±10 ppm
Deviation ppm = ((Mean – Measured Frequency) / Mean) x 10
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 30 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.14
Frame Repetition Stability
Test Method:
ANSI C63.17, clause 6.2.2.
Test Results: Complies
Measurement Data:
The envelope of the RF signal from the EUT is detected with a Crystal Detector and the mean and standard
deviation of the frame repetition frequency is then gated over 100 frames and measured with a Frequency
Domain Analyzer. The frame repetition stability is 3 times the standard deviation.
Carrier Frequency
(MHz)
Mean
(Hz)
Standard Deviation
(Hz)
Frame Repetition
Stability (ppm)
1924.992
99.999466
0.000015
0.455
Limit:
Frame Repetition Stability
±10 ppm (TDMA)
Ref. FCC 15.323(e), ANSI C63.17, clause 6.2.2
3.15
Frame Period and Jitter
Test Method:
ANSI C63.17, clause 6.2.3.
Test Results: Complies
Measurement Data:
Carrier Frequency
(MHz)
Frame Period
(ms)
Max Jitter
(µs)
3xStandard Deviation
of Jitter (µs)
1924.992
99.999
-0.037
-0.025
Max Jitter = (1/ (Frame period + Pk-Pk/2)) - (1/Frame Period), when Pk-Pk and Frame Period are in Hz
3xSt.Dev.Jitter = 3x (1/(Frame Period + St.Dev) – 1/St.Dev) x 10
Limit:
Frame Period
20 or 10 ms
Max Jitter
25 µs
3 times St.Dev of Jitter
12.5 µs
Ref. FCC 15.323(e), ANSI C63.17, clause 6.2.3
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 31 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Frame Repetition Stability, Gated over 100 Frames
Frame Period and Jitter
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 32 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.16
Monitoring Threshold, Least Interfered Channel
Monitoring Threshold Limits:
Lower Threshold:
TL = 15 log B - 184 + 30 - PEUT
(dBm)
Upper Threshold:
TU = 15 log B - 184 + 50 - PEUT
(dBm)
B is measured Emission Bandwidth in Hz
PEUT is measured Transmitter Power in dBm
Calculated values:
FCC 15.323
RSS-213, Issue 2
Lower Threshold
-79.7 dBm
-80.4 dBm
Upper Threshold
N/A
-60.4 dBm
Least Interfered Channel Procedure (LIC) may only be used by systems with more than 20 duplex system
access channels. Systems with less than 20 duplex system access channels are not allowed to transmit
when interferer level is above Lower Threshold.
Upper Threshold has been removed from FCC 15D but still exists in the current Industry Canada RSS-213.
Measurement Procedure:
The Upper or Lower Threshold is found by the procedure defined in ANSI C63.17 clause 7.3.1 or 7.3.2.
Least Interfered Channel Procedure NOT used:
Lower Threshold
N/A
dBm
-63.0
dBm
Least Interfered Channel Procedure:
Upper Threshold
Least Interfered Channel (LIC) Procedure Test, FCC 15.323(b), (c)(2) and (c)(5)
ANSI C63.17 clause 7.3.3 ref.
Observation
Verdict
b) f1 TL + 13 dB, f2 at TL + 6 dB
Transmission always on f2
Pass
c) f1 TL + 6 dB, f2 at TL + 13 dB
Transmission always on f1
Pass
d) f1 TL + 7 dB, f2 at TL
Transmission always on f2
Pass
e) f1 TL, f2 at TL + 7 dB
Transmission always on f1
Pass
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 33 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Selected Channel Confirmation, FCC 15.323(c)(1) and (5)
ANSI C63.17 clause 7.3.4
Observation
Verdict
b) Shall not transmit on f1
EUT transmits on f2
Pass
d) Shall not transmit on f2
EUT transmits on f1
Pass
Limits:
FCC 15.323
RSS-213, Issue 2
Lower Threshold + 6 dB margin
-73.7 dBm
-74.4 dBm
Upper Threshold + 6 dB margin
N/A
-54.4 dBm
DELTA MARKER 2
3.03 s
Ref
0 dBm
* Att
10 dB
RBW 300 kHz
VBW 1 MHz
SWT 5 s
Delta 2 [T1 ]
30.77 dB
3.030000 s
Marker 1 [T1 ]
-50.58 dBm
329.924000 ms
-10
SGL
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
500 ms/
14:33:00
7.3.4 Selected Channel Confirmation, Connection 3.0s After Interferer Removed
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 34 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.17
Threshold Monitoring Bandwidth
This test is only required if a dedicated monitoring receiver is used. However, if the test is not carried out the
manufacturer shall declare and provide proper evidence that the monitoring is made through the radio
receiver used for communication.
Measurement Procedure:
Simple Compliance Test, ANSI C63.17, clause 7.4.1
More Detailed Test, ANSI C63.17, clause 7.4.2
The test is passed if either the Simple Compliance Test or the More Detailed test is passed.
During this test the spectrum analyzer is observed visually to see if the EUT transmits or not.
Test Results:
Test performed
Observation
Verdict
No transmissions
Pass
More Detailed Test, at -6 dB points
N/A
N/A
More Detailed Test, at -12 dB points
N/A
N/A
Simple Compliance test, at ±30% of B
The more detailed test must be pass at both the -6 and -12 dB points if the Simple Compliance test fails.
Comment: The Simple Compliance Test was performed with the level at TU + UM + 10 dB to check that the
EUT did not transmit at all.
The tested EUT uses the same receiver for monitoring and communication, this test is therefore
not required. However the test has been performed nonetheless and the test is passed.
Limits, FCC 15.323(c)(7):
The monitoring system bandwidth must be equal to or greater than the emission bandwidth of the intended
transmission.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 35 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.18
Reaction Time and Monitoring Interval
Measurement Procedure
ANSI C63.17, clause 7.5
Test results:
By administrative commands and out-of-operating region interference, the EUT is restricted to operate on a
single carrier frequency.
Time-synchronized pulsed interference was then applied on the carrier at pulsed levels TU + UM to check that
the EUT does not transmit at all. The level was raised 6 dB for part d) with 35 µs pulses.
The pulses are synchronized with the EUT timeslots and applied centered within all timeslots.
Pulse Width, ref. to ANSI C63.17 clause 7.5
Observation
Verdict
c) > largest of 50 µs and 50*SQRT(1.25/B)
No transmissions
Pass
d) > largest of 35 µs and 35*SQRT(1.25/B),
and with interference level raised 6 dB
No transmissions
Pass
Comment: Since B is larger than 1.25 MHz the test was performed with pulse lengths of 50 µs and 35 µs.
Limits, FCC 15.323(c)(1), (5) and (7)
The maximum reaction time must be less than 50xSQRT (1.25/emission bandwidth in MHz) microseconds
for signals at the applicable threshold level but shall not be required to be less than 50 microseconds.
If a signal is detected that is 6 dB or more above the applicable threshold level, the maximum reaction time
shall be 35xSQRT (1.25/emission bandwidth in MHz) microseconds but shall not be required to be less than
35 microseconds.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 36 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Ref
* Att
0 dBm
10 dB
RBW 1 MHz
VBW 3 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:26:59
50 µs Pulses
Ref
* Att
0 dBm
10 dB
RBW 1 MHz
VBW 3 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:27:36
35 µs Pulses
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 37 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.19
Time and Spectrum Window Access Procedure
This requirement is only for EUTs which transmit unacknowledged control and signaling information.
Measurement Procedure:
Timing for EUTs using control and signaling channel type transmissions: ANSI C63.17, clause 8.1
Test results:
Access Criteria, ref. to ANSI C63.17 clause 8.1.1
Observation
Verdict
b) Check that the EUT transmits on the interference
free time-slot
N/A
N/A
b) The EUT must terminate or pause in its repetitive
transmission of the control and signalling channel on
the open channel to repeat the access criteria not less
frequently than every 30 s
N/A
N/A
If FCC 15.323(c)(6) option, If Random Waiting Interval is NOT implemented
Access Criteria, ref. to ANSI C63.17 clause 8.1.2
b) Check that the EUT changes to an interference-free
slot when interference is introduced on the time slot in use
Observation
Verdict
N/A
N/A
If FCC 15.323(c)(6) option, Only if Random Waiting Interval is implemented
Access Criteria, ref. to ANSI C63.17 clause 8.1.3
b-d) Check that the EUT uses random waiting interval
before continuing transmission on an interfered time slot
Comment:
Observation
Verdict
N/A
N/A
The tested EUT does not transmit unacknowledged control and signaling information.
Limits:
FCC 15.323(c)(4):
Once access to specific combined time and spectrum windows is obtained an acknowledgement from a
system participant must be received by the initiating transmitter within one second or transmission must
cease. Periodic acknowledgements must be received at least every 30 seconds or transmission must cease.
Channels used exclusively for control and signaling information may transmit continuously for 30 seconds
without receiving an acknowledgement, at which time the access criteria must be repeated.
FCC 15.323(c)(6):
If the selected combined time and spectrum windows are unavailable, the device may either monitor and
select different windows or seek to use the same windows after waiting an amount of time, randomly chosen
from a uniform random distribution between 10 and 150 milliseconds, commencing when the channel
becomes available
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 38 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.20
Acknowledgements and Transmission Duration
Measurement Procedure:
Acknowledgements: ANSI C63.17, clause 8.2.1
Transmission Duration: ANSI C63.17, clause 8.2.2
During the test Initial transmission without acknowledgements the signal from the EUT to the companion
device is blocked by circulators in addition to the tunable attenuator.
The test Transmission time after loss of acknowledgements is performed by cutting-off the signal from
the companion device by a RF switch and measuring the time until the EUT stops transmitting.
The Transmission Duration test is performed by monitoring the slot in use and measuring the time until the
EUT changes to a different slot.
Test Results:
Acknowledgements
Test ref. to ANSI C63.17 clause 8.2.1
Observation
Verdict
a) Initial transmission without acknowledgements
0.32 sec
Pass
c) Transmission time after loss of acknowledgements
10.0 sec
Pass
Test ref. to ANSI C63.17 clause 8.2.2
Observation
Verdict
b) Transmission duration on same time
and frequency window
2 minutes*
Pass
Transmission Duration
Comment:
*EUT stops transmitting after 2 minutes.
Limits, FCC 15.323(c)(3) and (4)
Occupation of the same combined time and spectrum windows by a device or group of cooperating devices
continuously over a period of time longer than 8 hours is not permitted without repeating the access criteria.
Once access to specific combined time and spectrum windows is obtained an acknowledgement from a
system participant must be received by the initiating transmitter within one second or transmission must
cease.
Periodic acknowledgements must be received at least every 30 seconds or transmission must cease.
Channels used exclusively for control and signaling information may transmit continuously for 30 seconds
without receiving an acknowledgement, at which time the access criteria must be repeated.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 39 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
DELTA MARKER 2
324 ms
Ref
0 dBm
* Att
10 dB
RBW 1 MHz
VBW 3 MHz
SWT 2 s
Delta 2 [T1 ]
-0.00 dB
324.000000 ms
Marker 1 [T1 ]
-18.93 dBm
1.447924 s
-10
SGL
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
200 ms/
14:05:34
8.2.1a) Initial Transmission Without Acknowledgements
DELTA MARKER 2
9.992 s
Ref
0 dBm
* Att
10 dB
RBW 1 MHz
VBW 3 MHz
SWT 12 s
Delta 2 [T1 ]
-0.21 dB
9.992000 s
Marker 1 [T1 ]
-18.07 dBm
1.179924 s
-10
SGL
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1.2 s/
13:43:01
8.2.1c) Transmission Time After Loss of Acknowledgements
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 40 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.21
Dual Access Criteria Check
Measurement Procedure:
EUTs that does not implement the Upper Threshold: ANSI C63.17, clause 8.3.1
EUTs that implement the Upper Threshold: ANSI C63.17, clause 8.3.2
This test is required for equipment that uses the access criteria in FCC 15.323(c)(10).
Test Results:
EUTs that Implements the Upper Threshold:
Test ref. to ANSI C63.17 clause 8.3.2
Observation
Verdict
EUT can transmit
Pass
c) d) Transmission on interference-free receive
time/spectrum window
EUT transmits on interference
free receive slot
Pass
e) f) Transmission on interference-free transmit
time/spectrum window
EUT transmits on interference
free transmit slot
Pass
No connection possible
Pass
b) EUT is restricted to a single carrier f1 for TDMA
systems. The Test is Pass if EUT can transmit
g) Transmission not possible on any
time/spectrum window
Comment:
See plots.
Limits, FCC 15.323(c)(10)
An initiating device may attempt to establish a duplex connection by monitoring both its intended transmit and
receive time and spectrum windows. If both the intended transmit and receive time and spectrum windows
meet the access criteria, then the initiating device can initiate a transmission in the intended transmit time and
spectrum window. If the power detected by the responding device can be decoded as a duplex connection
signal from the initiating device, then the responding device may immediately begin transmitting on the
receive time and spectrum window monitored by the initiating device.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 41 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
RESOLUTION BANDWIDTH
300 kHz
Ref
0 dBm
* Att
10 dB
RBW 300 kHz
VBW 1 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:09:13
8.3.2c) EUT Transmits on Interference Free RECEIVE Slot, BEFORE
RESOLUTION BANDWIDTH
300 kHz
Ref
0 dBm
* Att
10 dB
RBW 300 kHz
VBW 1 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:10:22
8.3.2c) EUT Transmits on Interference Free RECEIVE Slot, AFTER
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 42 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
RESOLUTION BANDWIDTH
300 kHz
Ref
0 dBm
* Att
10 dB
RBW 300 kHz
VBW 1 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:12:33
8.3.2e) EUT Transmits on Interference Free TRANSMIT Slot, BEFORE
RESOLUTION BANDWIDTH
300 kHz
Ref
0 dBm
* Att
10 dB
RBW 300 kHz
VBW 1 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:13:07
8.3.2e) EUT Transmits on Interference Free TRANSMIT Slot, AFTER
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 43 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
RESOLUTION BANDWIDTH
300 kHz
Ref
0 dBm
* Att
10 dB
RBW 300 kHz
VBW 1 MHz
SWT 10 ms
-10
1 PK *
CLRWR
TRG
-20
-30
-40
-50
-60
-70
-80
-90
-100
Center 1.923264 GHz
Date:
12.MAY.2014
1 ms/
14:11:57
8.3.2g) No Connection
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 44 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
3.22
Alternative Monitoring Interval
Test procedure described in ANSI C63.17 clause 8.4.
This test is required if the EUT implements the provisions of FCC 15.323(c)(11).
Test result:
Not Tested. The tested EUT does not implement this provision. See manufacturers’ declaration.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 45 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
4.1
Test Setups
Frequency Measurements
Modulation
Domain Analyzer
EUT
Test equipment included: 5, 9, 19, 22, 28
Test Set-up 1
This setup is used for measuring Carrier frequency stability at normal and extreme temperatures.
4.2
Timing Measurements
Crystal
Detector
Modulation
Domain Analyzer
EUT
Test equipment included: 5, 7, 9, 19, 22
Test Set-up 2
This setup is used for measuring Frame repetition stability, Frame period and Jitter.
4.3
Conducted Emission Test
10 dB
EUT
Spectrum
Analyzer
Test equipment included: 1, 2, 9, 19, 22, 26
Test Set-up 3
This setup is used for all conducted emission tests.
4.4
Power Line Conducted Emissions Test
Shielded Room
EUT
LISN
Test Receiver
Test equipment: 8, 17, 19, 22, 27
Test Set-Up 5
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 46 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
4.5
Monitoring Tests
Tunable
Attenuator
10 dB
Generator 1
CLK100
Companion
Device
Combining
Device
EUT
Generator 2
Shielded Room
Generator 3
Spectrum
Analyzer
Pulse Pattern
Generator
Sync signal
Test equipment: 2, 3, 4, 6, 9, 10, 11, 12, 13, 14, 15, 19, 23, 24, 25, 26, 29
Test Set-Up 6
This test setup is used for all Monitoring and Time and Spectrum Access Procedure tests. The path loss from
the signal generators to the EUT is measured with a power meter before the testing is started.
The CLK100 is used to synchronize the Pulse-/ Pattern generator to the start of the DECT frame, this signal
always comes from the base station. If the EUT is a DECT Portable Part (i.e. a handset) the CLK100 signal
will come form the Companion Device.
The sync signal to the Spectrum Analyzer is the CLK100 signal that is regenerated in the Pulse-/ Pattern
Generator, this is used to synchronize the Spectrum Analyzer to the DECT frame when in zero span. The
Pulse-/ Pattern Generator is used for tests that require time synchronized pulses or blocking of specific time
slots.
Nemko Norway, Instituttveien 6, Kjeller, Norway
Page 47 (48)
TEST REPORT
FCC part 15D
Report no.: 258223-5
FCC ID: ACJ96NKX-HNC600
Test Equipment Used
To facilitate inclusion on each page of the test equipment used for related tests, each item of test equipment
and ancillaries are identified (numbered) by the Testhouse.
No.
Model number
Description
Manufacturer
Ref. no.
Cal. date
Cal. Due
FSW26
Spectrum Analyzer
Rohde & Schwarz
LR 1504
2013.08.30
2014.08.30
SME03
Signal generator
Rohde & Schwarz
LR 1238
2013.03.19
2015.03.19
SMIQ03B
Signal generator
Rohde & Schwarz
LR 1516
2012.11.02
2014.11.02
SMHU52
Signal generator
Rohde & Schwarz
LR 1240
Cal b4 use
53310A
Modulation Domain Analyzer
Hewlett Packard
LR 1483
2013.08.14
2015.08.14
81104A
Pulse-/ Pattern Generator
Agilent
LR 1502
2013.03.19
2015.03.19
8470B
Crystal Detector
Hewlett Packard
LR 1207
N/A
ESHS10
Measuring Receiver
Rohde & Schwarz
N- 3528
2012.06.28
2014.06.28
4768-10
Attenuator
Narda
LR1356
Cal b4 use
10
745-69
Step Attenuator
Narda
LR 1442
N/A
11
WE 1506A
Power Splitter
Weinchel
LR 244
Cal b4 use
12
WE 1506A
Power Splitter
Weinchel
LR 245
Cal b4 use
13
H-9
Hybrid
Anzac
LR 86
Cal b4 use
14
H-9
Hybrid
Anzac
LR 257
Cal b4 use
15
S212DS
RF Switch
Narda
LR 1244
N/A
17
ESH3-Z5
Two Line V-Network
Rohde & Schwarz
LR 1076
Cal b4 use
19
6812B
AC Power Source
Agilent
LR 1515
2013.10.28
2014.10.28
22
Model 87 V
Multimeter
Fluke
N-4670
2013.10.07
2014.10.07
23
87H35-1
Circulator
Racal-MESL
s.no.: 140
N/A
24
87H35-1
Circulator
Racal-MESL
s.no.: 141
N/A
25
87H35-1
Circulator
Racal-MESL
s.no.: 142
N/A
26
U2000A
USB Average Power Sensor
Agilent
LR 1523
2013.10.23
27
ESH3-Z2
Pulse Limiter
Rohde & Schwarz
LR 1074
Cal b4 use
28
CMD60
DECT Tester
Rohde & Schwarz
LR 1335
2012.11.01
2014.11.01
29
FSP30
Spectrum Analyzer
Rohde & Schwarz
LR1551
2013.02.25
2015.02.25
Nemko Norway, Instituttveien 6, Kjeller, Norway
2015.10.23
Page 48 (48)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Print high-res
Page Count                      : 48
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:40a4487a-e71c-11e3-0000-0c282a19bdd9
Producer                        : GPL Ghostscript 9.10
Keywords                        : ()
Modify Date                     : 2014:05:26 12:30:15+02:00
Create Date                     : 2014:05:26 12:30:15+02:00
Creator Tool                    : PDFCreator Version 1.7.2
Document ID                     : uuid:40a4487a-e71c-11e3-0000-0c282a19bdd9
Format                          : application/pdf
Title                           : 5_258223 KX-HNC600 UPCS FCC15D
Creator                         : sveinsenfr
Description                     : ()
Author                          : sveinsenfr
Subject                         : 

EXIF Metadata provided by EXIF.tools