Panasonic of North America 96NKX-TGA405 DECT Cordless Telephone Repeater User Manual TGA405 applay ver001 indd
Panasonic Corporation of North America DECT Cordless Telephone Repeater TGA405 applay ver001 indd
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1211748 |
| Application ID | iVCnyKiXk/joSJKgDLpUbQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 47.98kB (599739 bits) |
| Date Submitted | 2009-12-10 00:00:00 |
| Date Available | 2010-01-24 00:00:00 |
| Creation Date | 2009-10-23 22:54:51 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2009-10-27 16:59:04 |
| Document Title | TGA405_applay_ver001.indd |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | 0542nagata |
Range Extender
Model No.
KX-TGA405
KX-TGA405C
Installation Guide for Range Extender
By installing this unit, you can extend the range of your phone system, to include
areas where reception was previously not available.
The unit extends the range in all directions, allowing several floors to be covered.
Important:
L This unit is an accessory unit for use with the following series of Panasonic Digital
Cordless phones: KX-TG4051/KX-TG4071/KX-TG4051C
LKX-TG4011/KX-TG4021/KX-TG4031/KX-TG4051/KX-TG4071/KX-TG6511/
This unit is pre-registered to the base unit.
LKX-TG6521/KX-TG6531/KX-TG6541/KX-TG7531
This leaflet only describes the steps needed to install and use the unit. Refer to the
thisinstructions
unit with your
unit beforeinformation,
it can be used.
LYou
basemust
unit’sregister
operating
for base
the accessory
important
lea et only
describes
steps needed
to install
andonly),
use the
Please read
LThis
information
for safety,
FCCthe
information
(for U.S.A.
users
andunit.
Industry
the
base Notices
unit’s operating
instructions
further
details.
Canada
and other
informationfor(for
Canada
users only).
For best performance
Placement
L We recommend installing the unit to a raised position (such as on a wall), which is
well within range of the base unit.
L Avoid positioning the unit close to objects that will interfere with reception, such as
thick walls, radiators, metal shelving, etc.
L For maximum distance noise-free operation, place the unit away from electrical
appliances such as TV, radio, personal computer or other telephone equipment.
L Keep a minimum distance of 5 m between this unit and the base unit.
(The minimum distance may vary depending on the location.) If the unit is installed
near the base unit, the handset directly communicates with the base unit.
Base unit
Base unit range
Handset
Range extender
Range extender range
Controls
A STATUS indicator
B q indicator
ID indicator
C PROGRAM
Understanding the STATUS indicator and q indicator
Indicator
Light status
Meaning
STATUS
indicator
Green
On
L Within base unit range. The unit is ready for
use.
Flashing
L 1 handset is communicating with the base
unit through this unit.
Flashing
rapidly
L 2 handsets are communicating with the base
unit through this unit.
Red
On
indicator
L Out of base unit range.
L The power is off. (AC adaptor is not
connected properly.)
Off
Green
On
L Signal strength of the base unit is strong.
Amber
On
L Signal strength of the base unit is weak.
Red
On
Off
L Out of base unit range.
L The unit is not being used.
L The power is off.
Installation
1 Base unit:
Press and hold [LOCATOR] for about 5 seconds until the registration tone
sounds.
LThe next step must be completed within 90 seconds.
_2_
21
Connect the unit.
L Use only the supplied Panasonic AC adaptor PQLV219.
Hook
(120 V AC, 60 Hz)
Press plug firmly.
L When the unit is turned on, the STATUS indicator and q indicator light amber
for about 2 seconds.
32
Confirm that the STATUS indicator and q indicator light green. (The unit is
ready for use.)
L If the indicators do not light green, re-position the unit in a place where the
indicators light green.
LTo stop the registration tone, press [LOCATOR] on the base unit.
Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
L The unit can support a maximum of 2 handsets at a time.
Wall Mounting
Drive the screws (not supplied) into the wall. Mount the unit, then slide it down.
Screws
37.0 mm
(1 15 /32 inches)
Specifications
N Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)
N Frequency range: 1.92 GHz to 1.93 GHz
N RF transmission power: 115 mW (max.)
N Power source: 120 V AC, 60 Hz
N Power consumption: Standby: Approx. 1.0
0.0 W, Maximum: Approx. 1.8
0.0 W
_3_
Troubleshooting
Problem
Cause/solution
The unit does not work.
L When the indicators do not light, the AC adaptor is not
connected properly. Check the connections.
L When the indicators light red, the unit is out of base
unit range. Move the unit closer to the base unit.
L Registration may have been canceled.
Deregister the unit, then re-register.
Deregister:
1 Unplug the AC adaptor, then press and hold
{PROGRAM}.
2 While pressing and holding {PROGRAM},
re-connect the AC adaptor.
3 Keep pressing and holding {PROGRAM} for about
10 seconds until the STATUS indicator flashes
amber. Then release {PROGRAM}.
Re-register:
1 Range extender: Unplug the AC adaptor.
2 Base unit: Press and hold {LOCATOR} for about
5 seconds until the registration tone sounds.
– The next step must be completed within 90
seconds.
3 Range extender: Connect the AC adaptor, then
wait until the STATUS indicator lights green.
4 Base unit: To stop the registration tone, press
{LOCATOR}.
While talking using the
handset, sound cuts in
and out.
L The handset is out of range. Move the handset closer
to this unit.
_4_
Operating safeguards
For your safety
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
L Use only the power source marked on the
product.
L Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
L Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
L Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at 1-800-211PANA (1-800-211-7262).
L Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical shock,
do not expose the product to rain or any
type of moisture.
L Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
L Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Medical
L Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of 1.92
GHz to 1.93 GHz, and the RF transmission
power is 115 mW (max.).)
L Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
･LThe
AC install
adaptor
is used as
the main
Never
telephone
wiring
during an
disconnected
device. Ensure that the AC
electrical storm.
installed
near theline
product
is
Loutlet
Neverisinstall
telephone
jacks and
in wet
locations
unless the jack is specifically
easily
accessible.
designed for wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
L Use caution when installing or modifying
telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
L This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure.
_5_
Environment
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Range
extender
location/avoiding
Base unit
location/avoiding
noise noise
The
extender
andcompatible
other compatible
The range
base unit
and other
Panasonic
Panasonic
unitswaves
use radio
waves to
units use radio
to communicate
with
communicate
with
each
other.
each other.
L For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
L Coverage and voice quality depends on the
local environmental conditions.
L If the reception for a base unit location is not
satisfactory, move the base unit to another
location for better reception.
L Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
L The product should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the
product.
L When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
L The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
L The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
L Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
L Wipe the outer surface of the product
with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
_6_
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer, or
return
L This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
Important
safety
FCC
and other
information
instructions
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digita
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user i
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
_7_
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce, or eliminate,
interference.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
L To
To comply
comply with
with FCC
FCC RF
RF exposure
exposure
requirements,the
therange
base unit
must must
be be
requirements,
extender
installedand
andoperated
operated20
20cm
cm(8
(8inches)
inches)or more
installed
or more between
theand
product
and all body
between
the product
all person’s
person’s body
(excluding
extremities
of feet).
(excluding
extremities
of hands,
wrist and
hands, wrist and feet).
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
Notice
L FCC
FCC ID
ID can
can be
be found
found on
inside
battery
the the
bottom
of the unit.
compartment or on the bottom of the
units.
_8_
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2009:10:27 16:59:04+09:00 Create Date : 2009:10:23 22:54:51+09:00 Metadata Date : 2009:10:27 16:59:04+09:00 Format : application/pdf Title : TGA405_applay_ver001.indd Creator : 0542nagata Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:728d8dce-6891-4063-ac5e-794b37a8c2f3 Instance ID : uuid:725a4565-dce0-401a-9f7f-0c6db9e5c2a4 Has XFA : No Page Count : 8 Author : 0542nagataEXIF Metadata provided by EXIF.tools