Panasonic of North America 9TGBT11B Bluetooth Module (POWER CLASS II) User Manual CPE02386ZA CF D1mk1 XP7 OI M indb

Download:
Mirror Download [FCC.gov]
Document ID	1505387
Application ID	z7Dj2To2YJmNQq8nxJxBDg==
Document Description	OPERATING INSTRUCTIONS
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	165.7kB (2071235 bits)
Date Submitted	2011-07-20 00:00:00
Date Available	2011-09-04 00:00:00
Creation Date	2011-06-22 23:06:36
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-06-22 23:06:36
Document Title	CPE02386ZA_CF-D1mk1_XP7_OI_M.indb
Document Creator	Adobe InDesign CS3_J (5.0.4)
Document Author:	matsu

OPERATING INSTRUCTIONS
Personal Computer
Model No.
CF-D1 series
Read Me First ............................................................. 3
(Precautions)
Description of Parts .................................................. 11
First-time Operation .................................................. 14
Useful Information
On-screen Manual .................................................... 22
Handling and Maintenance ....................................... 23
Reinstalling Software ................................................ 25
Troubleshooting
Troubleshooting (Basic)............................................ 28
Useful Information
Introduction ................................................................. 2
Troubleshooting
Getting Started
Getting Started
Contents
LIMITED USE LICENSE AGREEMENT ................... 33
Specifications ........................................................... 34
For further information about the computer, you can refer to the on-screen
manual.
To access the on-screen manual
page 22 “On-screen Manual”
Please read these instructions carefully before using this product, and save this manual for future use.
Appendix
Appendix
Introduction
Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully.
Terms and illustrations in these instructions
CAUTION :
Conditions that may result in minor or moderate injury.
NOTE
Useful and helpful information.
(Start) - [All Programs] : Click
(Start), and then click [All Programs]. You may need to double-click in some
cases.
Getting Started
[start] - [Run] :
Click [start], and then click [Run]. You may need to double-click in some cases.
Page in these Operating Instructions or in the Reference Manual.
Reference to the on-screen manuals.

Click [Enter] key.
Enter :
Click [Fn] key, and then click [F5] key.
Fn + F5 :

Press [Enter] key.
Enter :
Press
and hold [Fn] key, and then press [F5] key.
Fn F5
The display of the key may be different from this manual according to the keyboard used. (e.g. “Delete” instead
of “Del”)
indicates Genuine Windows® 7 Professional Operating System.
indicates Genuine Microsoft® Windows® XP Professional Operating System.
Some illustrations are simplified to help your understanding and may look different from the actual unit.
If you do not log on as an administrator, you cannot use some functions or cannot display some screens.
Refer for the latest information about optional products to the catalogs, etc.
In these instructions, the names and terms are referred as follows.
“Genuine Windows® 7 Professional 32-bit Service Pack 1” and “Genuine Windows® 7 Professional 64-bit Service
Pack 1” as “Windows” or “Windows 7”
“Genuine Microsoft® Windows® XP Professional Service Pack 3” as “Windows”, “Windows XP” or “Windows XP
Professional”
Circular media including DVD-ROM and CD-ROM as “discs”
Disclaimer
Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the
manuals.
Trademarks
Microsoft®, Windows®, the Windows logo, and IntelliMouse are registered trademarks of Microsoft Corporation of the
United States and/or other countries.
Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective
own companies.
Read Me First

This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy
emitted by this product however is far much less than the
electromagnetic energy emitted by wireless devices like
for example mobile phones.
Because this product operates within the guidelines
found in radio frequency safety standards and recommendations, we believe this product is safe for use by
consumers. These standards and recommendations reflect the consensus of the scientific community and result
from deliberations of panels and committees of scientists
who continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the proprietor of the building or
responsible representatives of the organization. These
situations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference
to other devices or services is perceived or identified as
harmful.
If you are uncertain of the policy that applies on the use
of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modification of this product.
The correction of interference caused by such unauthorized modification will be the responsibility of the user. We
and its authorized resellers or distributors are not liable
for damage or violation of government regulations that
may arise from failing to comply with these guidelines.
26-M-1
Lithium Battery / Pile au lithium
Lithium Battery!
This computer contains a lithium battery to enable the
date, time, and other data to be stored. The battery
should only be exchanged by authorized service personnel.
Warning! A risk of explosion from incorrect installation or
misapplication may possibly occur.
15-E-1
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable
collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise from inappropriate
waste handling.
For more information about collection and recycling of old
products and batteries, please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
Getting Started
Information to the User
For business users in the European Union
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
[Information on Disposal in other Countries
outside the European Union]
These symbols are only valid in the European
Union. If you wish to discard this product,
please contact your local authorities or dealer
and ask for the correct method of disposal.
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination with
a chemical symbol. In this case it complies with
the requirement set by the Directive for the
chemical involved.
53-E-1
Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, service or repair
of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of
the cellular terminal are advised to convey the following
safety information to users and operating personnel and
to incorporate these guidelines into all manuals supplied
with the product. Failure to comply with these precautions
violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability
for customer failure to comply with these precautions.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui
permet de sauvegarder certaines données, notamment la
date et l’heure. La pile ne doit être remplacée que par un
technicien qualifié.
Danger ! Risque d’explosion en cas de non respect de
cette mise en garde!
15-F-1
Information for Users on Collection
and Disposal of Old Equipment and
used Batteries
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste.
Read Me First
Getting Started
When in a hospital or other health care facility,
observe the restrictions on the use of mobiles.
Switch Personal Computer or Handheld Computer incorporating wireless WAN modem off,
if instructed to do so by the guidelines posted
in sensitive areas. Medical equipment may be
sensitive to RF energy.
The operation of cardiac pacemakers, other
implanted medical equipment and hearing
aids can be affected by interference from
Personal Computer or Handheld Computer
incorporating wireless WAN modem placed
close to the device. If in doubt about potential
danger, contact the physician or the manufacturer of the device to verify that the equipment
is properly shielded. Pacemaker patients are
advised to keep their Personal Computer or
Handheld Computer incorporating wireless
WAN modem away from the pacemaker,
while it is on.
Switch off Personal Computer or Handheld
Computer incorporating wireless WAN modem before boarding an aircraft. Make sure
it cannot be switched on inadvertently. The
operation of wireless appliances in an aircraft is forbidden to prevent interference with
communications systems. Failure to observe
these instructions may lead to the suspension
or denial of cellular services to the offender,
legal action, or both.
For details on usage of this unit in aircrafts
please consult and follow instruction provided
by the airline.
Do not operate Personal Computer or Handheld Computer incorporating wireless WAN
modem in the presence of flammable gases
or fumes. Switch off the cellular terminal when
you are near petrol stations, fuel depots,
chemical plants or where blasting operations
are in progress. Operation of any electrical
equipment in potentially explosive atmospheres can constitute a safety hazard.
Your Personal Computer or Handheld Computer incorporating wireless WAN modem
receives and transmits radio frequency energy
while switched on. Remember that interference can occur if it is used close to TV sets,
radios, computers or inadequately shielded
equipment. Follow any special regulations
and always switch off Personal Computer or
Handheld Computer incorporating wireless
WAN modem wherever forbidden, or when
you suspect that it may cause interference or
danger.
Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating wireless WAN modem while driving a
vehicle. Do not place the computer with wireless WAN modem in an area where it could
cause personal injury to the driver or passengers. It is recommended to stow the unit in the
boot or secure stowage area while driving.
Do not place the computer with wireless WAN
modem in an area over an air bag or in the
vicinity where an air bag may deploy.
Air bags inflate with great force and if the
computer with wireless WAN modem is
placed in the air bag deployment area may be
propelled with great force and cause serious
injury to occupants of the vehicle.
IMPORTANT!
Personal Computer or Handheld Computer
incorporating wireless WAN modem operate
using radio signals and cellular networks cannot be guaranteed to connect in all conditions.
Therefore, you should never rely solely upon
any wireless device for essential communications, for example emergency calls.
Remember, in order to make or receive calls,
Personal Computer or Handheld Computer
incorporating wireless WAN modem must
be switched on and in a coverage area with
adequate cellular signal strength.
Some networks do not allow for emergency
calls if certain network services or phone
features are in use (e.g. lock functions, fixed
dialing etc.). You may need to deactivate
those features before you can make an emergency call.
Some networks require that a valid SIM card
be properly inserted in Personal Computer or
Handheld Computer incorporating wireless
WAN modem.
Federal Communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral.
Also, any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment is provided with PC Card slot that
could be used with wireless transmitters, which will be
specifically recommended when they become available.
Other third-party wireless transmitters have not been
RF exposure evaluated for use with this computer and
may not comply with FCC RF exposure requirements.

This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment has been approved for portable operation, and does not require any minimum spacing
be provided between antennas and all person’s body.
If provided with wireless WAN transmitter, requires
LCD side panel spacers to provide minimum 1.5 cm
spacing between antenna located within the LCD side
panel, and all person’s body (excluding extremities of
hands, wrist and feet) during wireless modes of operation.
This equipment may not be co-located or operated
with any other antenna or transmitter.

This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter
or Port Replicator for mobile external mounted
antenna(s).
External antenna(s) must be professionally installed
and cannot exceed recommended maximum antenna
gain as described in individual provided supplement
instructions for wireless transmitters.
For WLAN, the Car Mounter should be used
with Radiall/ Larsen WLAN whip antenna, type
NMO5E2400BKTNC with 5 dBi antenna gain or less.
Also, user must maintain minimum 20 cm spacing
between external antenna(s) and all person’s body
(excluding extremities of hands, wrist and feet) during
wireless modes of operation.
25-M-1

This product is restricted to indoor use due to its operation in
the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High
power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations
can cause interference with and/or damage this product.
Getting Started
Models for U.S.A.
25-M-W-1
Responsible Party: Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-527-8675)
6-M-1
FCC RF Exposure Warning:
This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter or
Port Replicator for mobile external mounted antenna(s).
External antenna(s) must be professionally installed
and cannot exceed recommended maximum antenna
gain as described in individual provided supplement
instructions for wireless transmitters. The Car Mounter is
provided with Radiall/Larsen WLAN whip antenna, type
NMO5E2400BKTNC with 5 dBi antenna gain. Also, user
must maintain minimum 20 cm spacing between external
antenna(s) and all person’s body (excluding extremities
of hands, wrist and feet) during wireless modes of operation.
32-M-1
USA Only: Disposal may be regulated in your community due to Environmental considerations. For disposal
or recycling information, please visit Panasonic web site:
http://www.panasonic.com/environmental or call 1-888769-0149
65-M-2
Models for Canada
Canadian ICES-003
This Class B digital apparatus complies with Canadian
ICES-003.
7-M-2

Industry Canada
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.

Industrie Canada
Cet équipement est conforme à la norme CNR-210 d’Industrie Canada. Son fonctionnement est soumis aux
deux conditions suivantes :
(1) ce dispositif ne peut produire de brouillage, et
Read Me First
(2) ce dispositif doit accepter le brouillage, y compris le
brouillage pouvant entraîner le fonctionnement non
désiré de l’appareil.
30-Ca-1-1
Getting Started

This product (local network devices) for the band 51505250 MHz is only for indoor usage to reduce potential
for harmful interference to co-channel Mobile Satellite
systems.
High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850
MHz and these radars could cause interference and/or
damage to LELAN devices.

Cet appareil (pour réseaux locaux radioélectriques) dans
les bandes de fréquences 5150-5250 MHz est réservé à
une utilisation à l’intérieur afin de réduire le risque d’interférence avec les systèmes satellites mobiles bicanaux.
Les radars forte puissance sont désignés comme étant
les premiers utilisateurs (c’est-à-dire qu’ils ont la priorité)
des bandes de fréquences 5250-5350 MHz et 5650-5850
MHz. Ces stations radars peuvent provoquer des interférences et/ou des dommages à ce périphérique.
30-Ca-2-1

This device has been designed to operate with the Radiall/Larsen whip antenna, type NMO5E2400BKTNC
WLAN antenna having a maximum gain of 5 dBi. A
WLAN Antenna having a higher gain is strictly prohibited
per regulations of Industry Canada. The Required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication.

Cet appareil est conçu pour opérer avec l’antenne-fouet
Radiall/Larsen, type WLAN NMO5E2400BKTNC, ayant
un gain maximum de 5 dB. Les règlements d’Industrie
Canada interdisent l’utilisation d’une antenne WLAN dont
le gain serait supérieur à cette limite. L’antenne doit avoir
une impédance de 50 ohms.
Afin de réduire le risque d’interférence radioélectrique
aux autres utilisateurs des bandes de fréquences, le type
d’antenne et son gain doivent être tels que la puissance
isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour assurer la communication.
25-Ca-1-1
For Used in Motor Vehicle
Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support
vehicle related functions such as vehicle information,
system control, rear or side observation and navigation.
If used for entertainment purpose, such as television
reception or video play, it must be installed to the rear
of the driver’s seat where it will not be visible, directly or
indirectly, to the operator of the motor vehicle. Check with
individual state/provincial laws to determine lawful use of
this product while operating within a motor vehicle.
35-M-1
FOR USE WITH MODEL NO. : CF-AA5713A
POUR UTILISER AVEC MODÈLE : CF-AA5713A
20-Ca-1
Models for Europe

Declaration of Conformity (DoC)
“Hereby, Panasonic declares that this
Personal Computer is in compliance with
the essential requirements and other relevant provisions
of the Directive 1999/5/EC.”
Hint:
If you want to get a copy of the original DoC of our above
mentioned products,
please contact our web address:
http://www.doc.panasonic.de
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Indication of the countries where WLAN is intended to be
used:
AT BE BG CH CY CZ DE DK EE ES
FI FR GB GR HU IE IS IT LT LU
LV MT NL NO PL PT RO SE SI SK TR
18-25-E-1

Declaration of Conformity (DoC)
“Hereby, Panasonic declares that this Personal
Computer is in compliance with the essential
requirements and other relevant provisions of
the Directive 1999/5/EC.”
Hint:
If you want to get a copy of the original DoC of our above
mentioned products,
please contact our web address:
http://www.doc.panasonic.de
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Indication of the countries where WLAN is intended to be
used:
AT BE BG CH CY CZ DE DK EE ES
FI FR GB GR HU IE IS IT LT LU
LV MT NL NO PL PT RO SE SI SK TR
18-E-1
Regulations for Wireless LAN/Bluetooth
802.11a
Austria, Belgium, Restricted to
Croatia, Cyprus, indoor use.
Czech Republic,
Denmark, Estonia,
Finland, Germany,
Greece, Hungary,
Iceland, Ireland,
Latvia, Lithuania,
Macedonia, Malta,
Netherlands,
Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland,
United Kingdom
France
Restricted to
indoor use.
Italy
Restricted to indoor
use.
General authorization required if used
outside.
Luxembourg
Restricted to
indoor use.
General authorization required for
public service.
Turkey
Restricted to
indoor use.
Prohibited within
an 1 km radius
from the centre of
the runway of the
airports.
Norway
Restricted to
indoor use.
802.11b/g
Bluetooth
41-E-1-1
This equipment requires minimum 20 cm spacing from
all person’s body (excluding extremities of hands, wrist
and feet) in directions of the back and both sides of the
LCD display during wireless modes of operation.
60-E-1
Models for UK
Restricted to
indoor use.
General authorization required if used
outside of own
premises.
General authorization required for
public service.
Warning
This apparatus must be earthed for your safety.
To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is
effectively earthed through the normal household wiring.
Extension cords used with the equipment must be threecore and be correctly wired to provide connection to
earth. Wrongly wired extension cords are a major cause
of fatalities.
The fact that the equipment operates satisfactorily does
not imply that the power point is earthed and that the
installation is completely safe.
For your safety, if you have any doubt about the effective
earthing of the power point, consult a qualified electrician.
Getting Started
Country / Region
between the external antenna and all people (excluding extremities of hands, wrist and feet) during wireless
modes of operation.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 3 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 3 amps and that it is
approved by ASTA or BSI to BS 1362.
Check for the ASTA mark
or the BSI mark
on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.
Warning: THIS APPLIANCE MUST BE EARTHED.
Important
The wires in this mains lead are coloured in accordance
with the following code:
Green-and-yellow:
Earth
Blue:
Neutral
Brown:
Live
ASA
Prohibited within a
20 km radius from
the centre of NyÅlesund.
• The latest version of “ERC RECOMMENDATION 7003” by European Radiocommunications Committee and
the regulation in Turkey.
• Use only the antenna specified by Panasonic.
• Confirm the latest information to the radio regulation
authorities.
40-E-1
For Used in Motor Vehicle
Warning: Check the following Commission Recommendation to determine proper installation and usage of this
product while operating within a motor vehicle.
“Commission Recommendation on safe and efficient
in-vehicle information and communication systems: A
European statement of principles on human machine
interface.”
Commission Recommendation is available from Official
Journal of the European Communities.
35-E-1
When using Port Replicator or Car Mounter on which
an external antenna can be installed:
• External antenna for wireless LAN must be professionally installed.
• The gain of external antenna for wireless LAN must not
exceed 5 dBi.
• The user must maintain minimum of 20 cm spacing
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-and-YELLOW must
be connected to the terminal in the plug which is marked
coloured
by the letter E or by the safety earth symbol
GREEN or GREEN-and-YELLOW.
Read Me First
Getting Started
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured RED.
The mains plug on this equipment must be used to disconnect the mains power.
Please ensure that a socket outlet is available near the
equipment and shall be easily accessible.
How to replace the fuse
Open the fuse compartment with a screwdriver and replace the fuse.
Warnings
This equipment is not designed for connection to an IT
power system.
(An IT system is a system having no direct connections between live parts and Earth; the exposed-conductive-parts of the electrical installation are earthed.
An IT system is not permitted where the computer
is directly connected to public supply systems in the
U.K.)
Disconnect the mains plug from the supply socket
when the computer is not in use.
This equipment is produced to BS800/1983.
8-E-1
Precautions
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR
AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR
TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT
COCKPIT EQUIPMENT/SYSTEMS *1, MEDICAL DEVICES
OR ACCESSORIES *2, LIFE SUPPORT SYSTEMS OR
OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE
INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY.
PANASONIC WILL NOT BE RESPONSIBLE FOR ANY
LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1
AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include
Class2 Electrical Flight Bag (EFB) Systems and Class1
EFB Systems when used during critical phases of flight
(e.g., during take-off and landing) and/or mounted on to
the aircraft. Class1 EFB Systems and 2 EFB Systems
are defined by FAA: AC (Advisory Circular) 120-76A or
JAA: JAA TGL (Temporary Guidance Leaflets) No.36.
*2
As defined by the European Medical Device Directive
(MDD) 93/42/EEC.
Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g. Flammability/Smoke/Toxicity/
Radio Frequency Emission, etc) requirements related to
aviation standards and medical equipment standards that
differ from the specifications of our COTS (CommercialOff-The-Shelf) products.
This computer is not intended for use in medical equipment
including life-support systems, air traffic control systems, or
other equipment, devices or systems that are involved with
ensuring human life or safety. Panasonic cannot be held
responsible in any way for any damages or loss resulting
from the use of this unit in these types of equipment, devices
or systems, etc.
This product was developed based on thorough research
into the real-world portable computing environments. Exhaustive pursuit of usability and reliability under harsh conditions led to innovations such has the magnesium alloy
exterior, vibration damped hard disk drive and floppy disk
drive, flexible internal connections. This product’s outstanding engineering has been tested using the strict MIL-STD810F (for vibration and shock) and IP (for dust and water)
based procedures.
As with any portable computer device precautions should be
taken to avoid any damage. The following usage and handling procedures are recommended.
Before putting the computer away, be sure to wipe off
any moisture.
If a Malfunction or Trouble Occurs, Immediately Stop
Use
If a Malfunction Occurs, Immediately Unplug the AC
Plug and the Battery Pack
This product is damaged
Foreign object inside this product
Smoke emitted
Unusual smell emitted
Unusually hot
Continuing to use this product while any of the above conditions are present may result in fire or electric shock.
If a malfunction or trouble occurs, immediately turn the
power off and unplug the AC plug, and then remove the
battery pack. Then contact your technical support office for
repair.
Do Not Touch This Product and Cable When It Starts
Thundering
Electric shock may result.
Do Not Connect the AC Adaptor to a Power Source
Other Than a Standard Household AC Outlet
Otherwise, a fire due to overheating may result. Connecting
to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to
an AC outlet specifically approved for such use.
Do Not Do Anything That May Damage the AC Cord, the
AC Plug, or the AC Adaptor
Do not damage or modify the cord, place it near hot tools,
bend, twist, or pull it forcefully, place heavy objects on it, or
bundle it tightly.
Continuing to use a damaged cord may result in fire, short
circuit, or electric shock.
Do Not Pull or Insert the AC Plug If Your Hands Are Wet
Electric shock may result.
Clean Dust and Other Debris of the AC Plug Regularly
If dust or other debris accumulates on the plug, humidity,
etc. may cause a defect in the insulation, which may result
in a fire.
Pull the plug, and wipe it with a dry cloth.
Pull the plug if the computer is not being used for a long
period of time.
Insert the AC Plug Completely
If the plug is not inserted completely, fire due to overheating
or electric shock may result.
Do not use a damaged plug or loose AC outlet.
Do Not Place Containers of Liquid or Metal Objects on
Top of This Product
If water or other liquid spills, or if paper clips, coins, or foreign matter get inside this product, fire or electric shock may
result.
If foreign matter has found its way inside, immediately turn
the power off and unplug the AC plug and remove the battery pack. Then contact your technical support office.
Close the Connector Cover Tightly When Using This
shortest time possible.
Do Not Turn the Volume Up Too Loud When Using
Headphones
Listening at high volumes that overstimulate the ear for long
periods of time may result in loss of hearing.
Do not place the computer near a television or radio receiver.
Keep the computer away from magnets. Data stored on
the hard disk may be lost.
This computer is not intended for the display of images for
use in medical diagnosis.
This computer is not intended for a use with connection of
medical equipment for the purpose of medical diagnosis.
Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of
this product.
Interface Cable
Use of an interface cable longer than 3 m {9.84 feet} is not
recommended.
Getting Started
Product Where Is a Lot of Water, Moisture, Steam, Dust,
Oily Vapors, etc.
The entry of foreign matter may cause a fire or electric
shocks.
If foreign matter has found its way inside, immediately turn
the power off and unplug the AC cord, and then remove
the battery pack. Then contact your technical support office.
Do Not Disassemble This Product
You may receive an electric shock, or foreign matter may
enter and result in a fire.
Keep SD Memory Cards Away from Infants and Small
Children
Accidental swallowing will result in bodily injury.
In the event of accidental swallowing, see a doctor immediately.
Do Not Place This Product on Unstable Surfaces
If balance is lost, this product may fall over or drop, resulting
in an injury.
Avoid Stacking
If balance is lost, this product may fall over or drop, resulting
in an injury.
Do Not Block the Ventilation Hole (Exhaust)
Using this product wrapped in cloth or on top of bedding or
a blanket can block the ventilation hole and cause heat to
build up inside, possibly resulting in a fire.
Hold the Plug When Unplugging the AC Plug
Pulling on the cord may damage the cord, resulting in a fire
or electric shock.
Do Not Move This Product While the AC Plug Is Connected
The AC cord may be damaged, resulting in fire or electric
shock.
If the AC cord is damaged, unplug the AC plug immediately.
Use Only the Specified AC Adaptor With This Product
Using an AC adaptor other than the one supplied (supplied
with the unit or one sold separately as an accessory) may
result in a fire.
Do Not Subject the AC Adaptor to Any Strong Impact
Using the AC adaptor after a strong impact such as being
dropped may result in electric shock, short circuit, or fire.
Take a Break of 10-15 Minutes Every Hour
Using this product for long periods of time may have detrimental health effects on the eyes or hands.
Networks other than 1000BASE-T, 100BASE-TX or
10BASE-T
Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-premise switches),
digital public phones, etc.)
Do Not Use With Exposing the Skin to This Product For
a Long Period of Time
Using this product with exposing the skin to the heat source
of this product or AC adaptor for a long period of time can
cause a low-temperature burn.
Do Not Expose Yourself to the Hot Wind from the Ventilation Hole (Exhaust) For a Long Period of Time.
Low-temperature burns may result.
Covering the ventilation hole (exhaust) with your hand or
other object can cause heat to build up inside, possibly
resulting in burns.
Do Not Expose the Skin To This Product When Using
the Product In A Hot Or Cold Environment.
Burns, low-temperature burns, or frostbite may result.
• When it is necessary to expose the skin to this product
such as to scan a fingerprint, perform the operation in the
11-E-1
Precautions (Battery Pack)
Do Not Use With Any Other Product
The battery pack is rechargeable and was intended for the
specified product. If it is used with a product other than the
one for which it was designed, electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Charge the Battery Using Methods Other Than
Those Specified
If the battery is not charged using one of the specified
methods, electrolyte leakage, generation of heat, ignition or
rupture may result.
Do Not Throw the Battery Pack into a Fire or Expose It
to Excessive Heat
Generation of heat, ignition or rupture may result.
Avoid Extreme Heat (Near the Fire, in Direct Sunlight,
for Example)
Electrolyte leakage, generation of heat, ignition or rupture
may result.
Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Modify It
Electrolyte leakage, generation of heat, ignition or rupture
may result.
If this product is subjected to a strong impact, stop using it
immediately.
Do Not Short the Positive (+) and Negative (-) Contacts
Generation of heat, ignition or rupture may result.
Do not place the battery pack together with articles such
as necklaces or hairpins when carrying or storing.
Do Not Use This Product With a Battery Pack Other
Than the One Specified
Use only the specified battery pack ( page 14) with your
product. Use of battery packs other than those manufactured and supplied by Panasonic may present a safety
hazard (generation of heat, ignition or rupture).
When battery pack has deteriorated, replace it with a
new one
Continued use of a damaged battery pack may result in heat
generation, ignition or battery rupture.
Read Me First
CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect
Type. Dispose of Used Batteries According to the Instructions.
58-E-1
ATTENTION:
Il y a risque d’explosion si la batterie est remplacée par
une batterie de type incorrect.
Mettre au rebut les batteries usagées conformément aux
instructions.
58-F-1
Getting Started
Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts
are dirty or damaged.
Do not expose the battery pack to water, or allow it to
become wet.
If the battery pack will not be used for a long period of
time (a month or more), charge or discharge (use) the
battery pack until the remaining battery level becomes
30% to 40% and store it in a cool, dry place.
This computer prevents overcharging of the battery by
recharging only when the remaining power is less than
approx. 95% of capacity.
The battery pack is not charged when the computer is
first purchased. Be sure to charge it before using it for
the first time. When the AC adaptor is connected to the
computer, charging begins automatically.
Should the battery leak and the fluid get into your eyes,
do not rub your eyes. Immediately flush your eyes with
clear water and see a doctor for medical treatment as
soon as possible.
NOTE
The battery pack may become warm during recharging or normal use. This is completely normal.
Recharging will not commence if internal temperature of the battery pack is outside of the allowable
temperature range (0 °C to 50 °C) (
Reference
Manual “Battery Power”). Once the allowable range
requirement is satisfied, charging begins automatically. Note that the recharging time varies based on
the usage conditions. (Recharging takes longer than
usual when the temperature is 10 °C or below.)
If the temperature is low, the operating time is shortened. Only use the computer within the allowable
temperature range.
This computer has a high temperature mode function
that prevents the degradation of the battery in high
temperature environments. (
Reference Manual
“Battery Power”) A level corresponding to a 100%
charge for high temperature mode is approximately
equivalent to an 80% charge level for normal temperature mode.
The battery pack is a consumable item. If the amount
of time the computer can be run by using a particular
battery pack becomes dramatically shorter and repeated recharging does not restore its performance,
the battery pack should be replaced with a new one.
When transporting a spare battery inside a package,
briefcase, etc., it is recommended that it be placed in
a plastic bag so that its contacts are protected.
Always power off the computer when it is not in use.
Leaving the computer on when the AC adaptor is not
connected will exhaust the remaining battery capacity
Reference Manual “LAN”).
10
A lithium ion battery that is recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this
battery.
L’appareil que vous vous êtes procuré est alimenté par une batterie
au lithium-ion.
Pour des renseignements sur le
recyclage de la batterie, veuillez
composer le 1-800-8-BATTERY.
48-M-1
Description of Parts
Bottom and rear side
R Q P
C D E FG
A: Tether Hooks
The tether hooks are not provided for some models.
B: Tablet Buttons
Reference Manual “Tablet Buttons”
C: Pen Holder
D: LED Indicator
: Battery status
Reference Manual “Battery Power”
: Wireless ready
This indicator lights when wireless LAN, Bluetooth, and/or Wireless WAN are connected and
ready. It does not necessarily indicate the On/Off
condition of the wireless connection.
Reference Manual “Wireless LAN”, “Bluetooth”, “Wireless WAN”, “Disabling/Enabling
Wireless Communication”
: Hard disk drive status
: SD Memory Card Indicator
(Blinking: During access)
Reference Manual “SD Memory Card”
E: Power Switch
F: Power Status
(Off: Power off/Hibernation, Green: Power on, Blinking
green: Sleep(
) / Standby(
),
Blinking green rapidly: Cannot power on or resume
due to low temperature.)
G: Speaker
Reference Manual “Dashboard for Panasonic
PC”
H: LCD
Getting Started
J: Wireless WAN Antenna

Reference Manual “Wireless WAN”
K: Wireless LAN Antenna

Reference Manual “Wireless LAN”
L: Front Camera

Reference Manual “Camera”
M: Hard Disk Drive
N: Battery Pack
Specified Battery pack: CF-VZSU73U
O: Rear Camera

Reference Manual “Camera”
P: RAM Module Slot
Reference Manual “RAM Module”
Q: External Antenna Connector
R: Expansion Bus Connector
Reference Manual “Cradle”
S: Ventilation Hole (Intake)
Reference Manual “Touchscreen”
I: Bluetooth Antenna

Reference Manual “Bluetooth”
11
Description of Parts
Right side
Left side
Parts (F) illustrated below are all optional.
N M
PC
F *3 F *4 F *5 F *6
L K
EX
Getting Started
OFF
C *1
C *2
A: DC-IN Jack
B: LAN Port
Reference Manual “LAN”
C: Serial Port*1 / VGA Port*2
*1

*2

Reference Manual “External Display”
D: Security Lock
A Kensington cable can be connected.
For further information, read the manual that comes
with the cable.
E: Ventilation Hole (Exhaust)
F: 4th USB2.0 Port*3 / 2nd LAN Port*4 / Fingerprint
Reader*5 / Rugged USB2.0 Port*6
*3

Reference Manual “USB Devices”
*4

Reference Manual “LAN”
*5

Reference Manual “Fingerprint Reader”
*6

Reference Manual “USB Devices”
12
ON
To set the wireless switch to ON,
slide and align it to the V mark.
G: Wireless Switch
Reference Manual “Disabling / Enabling Wireless Communication”
H: ExpressCard Slot
Reference Manual “PC Card / ExpressCard”
I: SD Memory Card Slot
Reference Manual “SD Memory Card”
J: USB2.0 Ports
Reference Manual “USB Devices”
K: Microphone Jack
A condenser microphone can be used. If other types
of microphones are used, audio input may not be possible, or malfunctions may occur as a result.
L: Headphone Jack
You can connect headphones or amplified speakers.
When they are connected, audio from the internal
speakers is not heard.
M: SIM Card Slot

Insert the SIM card into the SIM card slot with the
contact side facing downward and with the cut corner
oriented forward.
Reference Manual “Wireless WAN”
N: PC Card Slot*7 / Smart Card Slot*8
*7

Reference Manual “PC Card”
*8

Reference Manual “Smart Card”
Getting Started
This computer contains a magnet and magnetic products at the location circled in the illustration at right. Avoid leaving metallic object or magnetic media
in contact with this area.
13
First-time Operation
Preparation
A Check and identify the supplied accessories.
If you do not find the described accessories, contact Panasonic Technical Support.
• AC Cord . . . . . . . . 1
• Battery Pack . . . . 1
• AC Adaptor . . . . . 1
Model No: CF-AA5713A
Getting Started
• Soft Cloth . . . . . . . 1
Model No: CF-VZSU73U
• Stylus . . . . . . . . . . 1
Model No: CF-VNP017U
• Tether . . . . . . . . . . 1
Model No: CF-VNT004U
Reference Manual “Touchscreen”)
• Safety Precautions and Regulatory Information . . . . . . . . . . . . . . . . . . . . . 1
• 
OPERATING INSTRUCTIONS (CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
For some models, Operating Instructions are installed in the hard disk.
• Product Recovery DVD-ROM Windows® 7 Professional . . . . . . . . . . . . . . . 1
B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging
( page 33).
Inserting the Battery Pack
②
①
A Slide the latch (A) in the direction of the arrow.
B Open the cover.
C Insert the battery pack until it securely fits the connector.
D Close the cover until it clicks.
E Slide the latch (A) in the direction of the arrow.
To remove the battery pack
In step C above, pull the tab (B) of the battery pack.
CAUTION
Make sure the latch is securely locked. Otherwise the battery pack may fall
when you carry the computer.
NOTE
③
⑤
④
14
Note that the computer consumes electricity even when the computer power is
off. If the battery pack is fully charged, the battery will fully discharge in the following period of time:
• When power is off: Approx. @@ weeks
• In sleep (
)/standby (
): Approx. @@ days
• In hibernation: Approx. @@ days
At the time of purchase, “Wake Up from LAN” is enabled.
If “Wake Up from LAN” is disabled, the period of time in sleep will become
slightly longer, and the period of time in hibernation will become about the same
as during power-off.
When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet. Power is consumed simply by having the AC adaptor
plugged into an electrical outlet.
Attaching the stylus to the computer
①
Use the tether to attach the stylus to the computer so you will not lose it.
There are holes (A) to attach it.
A Pass one of the loops through the hole.
B Pass the second loop on the tether through the first one.
C Thread the second loop through the hole (A).
D Pass the stylus through the second loop.
Getting Started
②
③
④
15
First-time Operation
Inserting the Battery Pack (
page 14)
Do not touch the terminals of the battery pack and the computer. Doing so can
make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.
Be sure to attach the cover for use.
②
Connect your computer to a power outlet, and connect the
external keyboard and mouse to the USB ports.
A Slide the latch in the direction of the arrow.
B Open the cover.
C Connect the AC adaptor.
The battery charging starts automatically.
D Slide the latch of one of the three USB ports in the direction of the arrow.
E Open the cover.
F Slide the latch of another USB port in the direction of the arrow.
G Open the cover.
H Connect the external keyboard and mouse to the USB ports.
Getting Started
①
CAUTION
③
⑦
⑥
Do not disconnect the AC adaptor and do not switch the wireless switch to on
until the first-time operation procedure is completed.
When using the computer for the first time, do not connect any peripheral device except the battery pack, AC adaptor, external keyboard and mouse.
Handling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the
battery pack alone.
⑤
④
⑧
Turn on the computer.
A Confirm the wireless switch ( page 12) is OFF.
B Press and hold the power switch until the power indicator (A) lights.
CAUTION
16
Do not press the power switch repeatedly.
The computer will forcibly be turned off if you press and hold the power switch
for 4 seconds or longer.
Once you turn off the computer, wait for 10 seconds or more before you turn on
the computer again.
Do not perform the following operation until the hard disk drive indicator
turns off.
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the touchscreen, external keyboard or external mouse
Turn on/off the wireless switch
When the CPU temperature is high, the computer may not start up to prevent
overheating of the CPU. Wait until the computer cools down, and then turn the
power on again. If the computer does not power on even after cooling down,
contact Panasonic Technical Support.
Any changes from the default setting of the Setup Utility must not be made until
the First-time Operation is completed.
4

Select language and OS (32 bit or 64 bit).
NOTE
You can operate with the Tablet Buttons. Follow the instructions displayed on
the screen.
Getting Started
A Select language and OS (32bit or 64bit) on “Select OS” screen and click
[OK].
The language setting will start by clicking [OK] on the confirmation screen.
You can return to the “Select OS” screen by clicking [Cancel].
The language and OS setting will be completed in about 15 minutes.
B When termination screen is displayed, click [OK] to turn off the computer.
C Turn on the computer.
CAUTION
Carefully choose your language because you cannot change it later. If you set a
wrong language, you need to reinstall Windows.
Setup Windows.
Follow the on-screen instructions.
The computer restarts several times. Do not touch the touchscreen, external
keyboard or external mouse, and wait until the hard disk drive indicator
has turned off.
After the computer is turned on, the screen remains black or unchanged for
a while. This is not a malfunction. Wait for a moment until the Windows setup
screen appears.
During setup of Windows, use the touchscreen, external mouse, external
keyboard and clicking to move the cursor and to click an item.
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
“Join a wireless network” screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.

Setup of Windows will take approximately 20 minutes. Go to the next step,
confirming each message on the display.
For some languages, the characters on the key and inputted character may
not match. Set the keyboard properly after the setup is complete. Then set
the password.
Do not change the settings on the screen where you select a country or region. You can set a country, region or keyboard layout in [Clock, Language,
and Region] of [Control Panel] after the Windows setup is complete.
CAUTION
Wait until the hard disk drive indicator
has turned off.
You can change the user name, password, image and Wireless Networks
) / security setting (
) after setup of Windows.
Use standard characters as a computer name: numbers 0 through 9, uppercase
and lowercase letters from A to Z, and the hyphen (-) character. If the error
message “The computer name is not valid” appears, check if characters other
than the above are not entered. If the error message still remains on the display, set the key entry mode to English (“EN”) and enter characters.
17
First-time Operation
Getting Started
Do not use the following words for user name: CON, PRN, AUX, CLOCK$,
NUL, COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user
name (account name) that includes the “@” mark, a password will be requested
at the log-on screen, even if no password has been set. If you try to log on
without entering a password, “The user name or password is incorrect.” may be
displayed and you will not be able to log on to Windows ( page 30).
The wallpaper for the first logon user has already been set on “5 Setup Windows.”.
When using this computer under the Sun, the screen becomes easily viewable
by changing the wallpaper to the white wallpaper.
A Right-click on the desktop, and click [Personalize] - [Desktop Background].
B Select [Solid Colors] at [Picture Location].
C Select the white wallpaper and click [Save changes].

When setting up the keyboard, choose the appropriate one to your computer.
Otherwise, input by the keyboard may become unavailable.
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If “An unexpected error has occurred ...” (or a similar message) is displayed,
click [OK]. This is not a malfunction.
Wait until the hard disk drive indicator
has turned off.

The keyboard will operate as the US keyboard until the keyboard setting is
changed. Because of this, some alphabets shown on display may differ from
inputted ones.
To avoid the accidental selections, during setting up Windows,
Use the external mouse to make some selections.
To match the languages, change the language settings after setting up Windows ( page 17). Do not change the settings in [To change system or these
settings, click Customize] of [Regional and Language Options] during setting up
Windows.
18

Change the language settings.

• English
• Arabic
• Bulgarian
• Chinese (Traditional)
• Croatian
• Danish
• Dutch
• Estonian
• French
• German
• Greek
• Hungarian
• Italian
• Japanese
• Latvian
• Lithuanian
• Norwegian
• Portuguese
• Portuguese (Brazilian)
• Russian
• Slovak
• Slovenian
• Swedish
• Thai
• Turkish
• Chinese (Simplified)
• Czech
• Finnish
• Hebrew
• Korean
• Polish
• Romanian
• Spanish
Change the language settings in the following menu.
[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional
and Language Options]
[Regional Options] - [Standards and Formats]
[Languages] - [Language used in menus and dialogs]
[Languages] - [Details] - [Default input language]
[Advanced] - [Language for non-unicode Programs]
Getting Started
NOTE
When you use MUI OS and localized OS versions together on the same network, use English computer names on localized versions of Windows.
Some UI (User Interface) strings remain in English even if the user’s UI is set to
another language.
For more information, refer to “c:\windows\mui\relnotes.txt”.
If you change the language in [Languages] - [Language used in menus and dialogs], the desktop color will be changed when logging on to Windows next time.
The desktop color can be changed by following the procedure below.
Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Desktop]
and select color from [Color], then click [OK].
Perform the touchscreen calibration.
To calibrate the touchscreen, use the stylus.
Before performing the calibration, close Tablet PC Input Panel.
NOTE
At first, log on to Windows as an administrator and perform this calibration.
A Open the Dashboard for Panasonic PC, and click [Change Settings] in
[Touch Calibration].
Alternatively, proceed with the following operation.
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC SetClick
ting].
B Click [Calibrate].
C Using the stylus, touch each of the “+” target marks one by one, and then
click [Yes].
D Click [OK].
NOTE
After completing the calibration as an administrator, perform the calibration for
each user by the above steps.
Perform the calibration for the orientation to be used.
19
First-time Operation
A Open the Dashboard for Panasonic PC, and click [Change Settings] in
[Touch Calibration].
Alternatively, proceed with the following operation.
Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B Using the stylus, touch each of the “+” target marks one by one until it blinks.
Create a new account.
Getting Started
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
Follow the on-screen instructions to create an account.
CAUTION
Remember your password. If you forget the password, you cannot use the Windows operating system. Creating a password reset disk beforehand is recommended.
NOTE
PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for
each record is 1024 bytes. This information is only used for estimating the cause in the case when the hard disk goes
down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
Reference Manual “Checking the Computer’s Usage Status”)
When Starting Up/Shutting Down
Do not do the following
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the touchscreen, external mouse or external keyboard
Turn on/off the wireless switch
NOTE
To conserve power, the following power saving methods are set at the time of purchase.
The screen automatically turns off after 10*1 minutes of inactivity.
The computer automatically enters sleep*2 (
)/standby*2 (
) after 20 minutes of inactivity.
*1
Windows XP :15 minutes
*2
Refer to
Reference Manual “Sleep and Hibernation Functions” about resuming from sleep.
20
To change the partition structure
You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new partition. This computer has a single partition as default setting.
A Click
(Start) and right-click [Computer], then click [Manage].
A standard user needs to enter an administrator password.
B Click [Disk Management].
C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].
The partition size depends on the computer specifications.
D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].
You cannot input a larger number than the displayed size.
To select [Reinstall to the first 2 partitions.] in reinstalling Windows 7 ( page 25), 30000 MB*3 or more is
necessary for [Total size after shrink in MB].
E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].
F Follow the on-screen instructions to make the settings, and click [Finish].
Wait until formatting is completed.
*3
For MUI OS model, 60000 MB or more is necessary.
Getting Started
When Logging on to Windows
Do not log on to Windows by the Guest account.
NOTE
You can create an additional partition using remaining unallocated space or newly creating unallocated space.
To delete a partition, right-click the partition and click [Delete Volume] in step C.
21
On-screen Manual
You can access the following manuals on the computer screen.
Reference Manual
The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.
To access the Reference Manual:
Double-click
Alternatively click
on the desktop.
(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].
Click [start] - [Reference Manual].
Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].
To display “Battery Power” of the Reference Manual, proceed as follows.
Double-click
Alternatively click
Double-click
on the desktop.
(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].
on the desktop.
Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].
NOTE
Useful Information
When you access the document of PDF format for the first time, the License Agreement of the Adobe Reader may
be displayed. Read it carefully and select [Accept] to proceed.
When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update.
See http://www.adobe.com/ for the latest version of Adobe Reader.
22
Handling and Maintenance
Operation environment
*1
Place the computer on a flat stable surface. Do not place the computer upright or turn it over. If the computer is
exposed to an extremely strong impact, it may become damaged.
Temperature: Operation : -10 °C to 50 °C (IEC60068-2-1, 2)*1
Storage : -20 °C to 60 °C
Humidity:
Operation : 30 % to 85 % RH (No condensation)
Storage : 30 % to 85 % RH (No condensation)
Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in
the product deterioration and will shorten the product life.
Do not expose the skin to this product when using the product in a hot or cold environment. ( page 9)
If the computer is wet in temperatures of 0 °C {32 °F} or below, freeze damage may occur. Make sure to dry off the computer in
such temperatures.
Do not place the computer in the following areas, otherwise the computer may be damaged.
Near electronic equipment. Image distortion or noise may occur.
In extremely high or low temperature.
As the computer can become hot during operation, keep it away from items that are sensitive to heat.
This computer is designed to minimize shock to parts such as the LCD and the hard disk drive, but no warranty is provided against any trouble caused by shock. Be extremely careful when handling the computer.
When carrying the computer:
Turn off the computer.
Remove all external devices, cables, Express Cards and other protruding objects.
Do not drop or hit the computer against solid objects.
Do not grip the display part.
When you board an airplane, take the computer with you and never put it in your checked luggage. When using the
computer on airplane, follow the airline’s instructions.
When carrying a spare battery, put it in a plastic bag to protect its terminals.
Be careful not to get injured by dropping or getting hit when carrying the computer.
Use only the included stylus to touch the touchscreen. Do not place any object on its surface and do not press
down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).
Do not use the touchscreen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/
stylus can scratch the screen surface or obstruct the stylus operation.
Use the stylus only for touching the screen. Using it for any other purpose may damage the stylus and result in
scratches on the screen.
Useful Information
Handling cautions
When using peripheral devices
Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction
manuals of the peripheral devices.
Use the peripheral devices conforming to the computer’s specifications.
Connect to the connectors in the correct direction.
If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.
If screws are included, fasten them securely.
Remove the cables when you carry the computer. Do not pull the cables forcibly.
Preventing your computer from unauthorized use via wireless LAN/Bluetooth/wireless WAN

Before using wireless LAN/Bluetooth/wireless WAN, make the appropriate security settings such as data encryption.
Battery Recalibration
The battery recalibration may take a long time due to the large battery capacity. This is not a malfunction.

Full charge: Approximately @@ hours
Complete discharge: Approximately @@ hours

Full charge: Approximately @@ hours
Complete discharge: Approximately @@ hours
Reference Manual “Battery Power”)
23
Handling and Maintenance
Maintenance
To clean the LCD panel
Use the soft cloth included with the computer. (For further information, refer to “Suggestions About Cleaning the LCD
Surface”.
Reference Manual “Touchscreen”)
To clean areas other than the LCD panel
Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it
thoroughly.
CAUTION
Useful Information
Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.
Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to
the surface.
Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause
malfunction or damage.
24
Reinstalling Software
Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk
data will be erased.
Back up important data to other media or an external hard disk before reinstallation.
Hard Disk Recovery
CAUTION
You can install Windows 7 only.
Do not delete the recovery partition on the hard disk.
The disk space in the partition is not available to store data.
Hard disk
HDD Recovery partition
Recovery partition
Area usable by Windows
NOTE
You can operate with the Tablet Buttons. Follow the instructions displayed on the screen.
You can also use the external keyboard and external mouse.
Preparation
Remove all peripherals.
Connect the AC adaptor and do not remove it until reinstallation is complete.
Turn off the computer and connect the external keyboard and mouse to the USB ports.
while [Panasonic] boot screen is displayed.
Turn on the computer, and press
The Setup Utility starts up.
If the [Panasonic] boot screen is not displayed, as soon as the computer starts up, press
the Setup Utility screen appears.
If the password is requested, enter the Supervisor Password.
several times until
Write down all of the contents of the Setup Utility and click F9.
At the confirmation message, select [Yes] and click Enter .
Click F10.
Press F2 or Del while [Panasonic] boot screen is displayed.
At the confirmation message, select [Yes] and click Enter.
Computer will restart.
The Setup Utility starts up.
If the [Panasonic] boot screen is not displayed, as soon as the computer starts up, press
the Setup Utility screen appears.
If the password is requested, enter the Supervisor Password.
Useful Information
several times until
Select the [Exit] menu, then select [Repair Your Computer] and click Enter .
Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
Select the settings and click [Next].
[Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to reinstall Windows to the factory default. After reinstallation, you can create a new partition. For how to create a new partition, refer to “To change the partition structure” ( page 21).
[Reinstall to the System and OS partitions.]*1
Select this option when the hard disk has already been divided into several partitions. For how to create a
new partition, refer to “To change the partition structure” ( page 21).
You can keep the partition structure.
*1
10
11
This does not appear if Windows cannot be reinstalled to the partition containing boot files and the area usable by
Windows.
At the confirmation message, click [YES].

Select OS (32bit or 64bit) and click [OK].

Select language and OS (32bit or 64bit), then click [OK].
25
Reinstalling Software
12
At the confirmation message, click [OK].
Reinstallation starts according to the instructions on the screen.
Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become
unavailable as Windows may not start up or the data may be corrupted.
13
14
When termination screen is displayed, click [OK] to turn off the computer.
Turn on the computer.
If the password is requested, enter the Supervisor Password.
15
16
17
Perform the “First-time Operation” ( page 17).
Start the Setup Utility and change the settings as necessary.
Perform Windows Update.
Using Product Recovery DVD-ROM 
Use the Product Recovery DVD-ROM for reinstallation in the following conditions.
You have forgotten the administrator password.
Reinstallation is not complete. The recovery partition may be broken.
Useful Information
NOTE
When you reinstall OS using the Product Recovery DVD-ROM, OS which was installed as the factory default will
be installed. To change OS from 32-bit to 64-bit, or vice versa, reinstall OS using the recovery partition in the hard
disk.
You can operate with the Tablet Buttons. Follow the instructions displayed on the screen.
You can also use the external keyboard and external mouse.
Preparation
Prepare the Product Recovery DVD-ROM
Prepare the following items:
USB DVD drive (refer to recent catalogs and other sources for information about the products available)
Remove all peripherals (excluding USB DVD drive)
Connect the AC adaptor and do not remove it until reinstallation is complete.
Turn off the computer and connect the external keyboard, external mouse and DVD
drive to the USB ports.
Turn on the computer, and press
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
If the [Panasonic] boot screen is not displayed, as soon as the computer starts up, press
the Setup Utility screen appears.
If the password is requested, enter the Supervisor Password.
several times until
Write down all of the contents of the Setup Utility and click F9.
At the confirmation message, select [Yes] and click Enter .
Click F10.
At the confirmation message, select [Yes] and click Enter .
Computer will restart.
Press
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
If the [Panasonic] boot screen is not displayed, as soon as the computer starts up, press
the Setup Utility screen appears.
If the password is requested, enter the Supervisor Password.
several times until
Set the Product Recovery DVD-ROM into the DVD drive.
Select the [Exit] menu, then select your DVD drive in [Boot Override].
Click Enter.
The computer will restart.
Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
10
26
Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
11
Select the settings and click [Next].
[Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to reinstall Windows to the factory default. After reinstallation, you can create a new partition. For how to create a new partition, refer to “To change the partition structure” ( page 21).
[Reinstall to the first 3 partitions.]*2
Select this option when the hard disk has already been divided into several partitions. For how to create a
new partition, refer to “To change the partition structure” ( page 21).
You can keep the partition structure.
*2
12
This does not appear if Windows cannot be reinstalled to the partition containing boot files and the area usable by Windows.
At the confirmation message, click [YES].
Reinstallation starts. (It will take approximately @@ minutes.)
According to the screen, replace the Product Recovery DVD-ROM.
Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become
unavailable as Windows may not start up or the data may be corrupted.
13
When termination screen is displayed, remove the Product Recovery DVD-ROM, and
then click [OK] to turn off the computer.
14
Remove the DVD drive.
15
Turn on the computer.
If the password is requested, enter the Supervisor Password.
Perform the “First-time Operation” (
page 17).
17
Start the Setup Utility and change the settings as necessary.
18
Perform Windows Update.
Useful Information
16
27
Troubleshooting (Basic)
Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the
“Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact
ReferPanasonic Technical Support. You can also check the computer’s status in the PC Information Viewer (
ence Manual “Checking the Computer’s Usage Status”).
Troubleshooting
Starting Up
Cannot start up.
The power indicator or battery indicator is not lit.
Connect the AC adaptor.
Insert a fully charged battery.
Remove the battery pack and the AC adaptor, then connect them again.
Even if the AC adaptor and battery pack are correctly connected, if the battery indicator
is not lit, the AC adaptor protection function may be operating. Disconnect the AC cord,
wait three minutes or more, and reconnect the AC cord.
If a device is connected to the USB port, disconnect the device, or set [USB Port] or
[Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
If a device is connected to the ExpressCard slot, disconnect the device, or set [ExpressCard Slot] to [Disabled] in the [Advanced] menu of the Setup Utility.
The power is turned on but
“Warming up the system (up
to 30 minutes)” appears.
The computer is warming up before start up. Wait for the computer to start up (takes
up to 30 minutes). If, “Cannot warm up the system” is displayed, the computer failed to
warm up and does not start. In this case, turn off the computer, leave it in an environment of 5 °C or higher temperature for about an hour, and then turn on the power once
more.
Cannot turn on the computer. The computer does not
resume from sleep
)/standby
).
(The power indicator blinks
quickly in green.)
Leave it in an environment of 5 °C or higher temperature for about an hour, then turn on
the power once more.
After adding or changing
the RAM module, the power
is turned on but nothing is
displayed on the screen.
Turn off the computer and remove the RAM module, then confirm whether the RAM
module has conformed to specification. When the RAM module has conformed to specification, install it again.
The computer does not
enter sleep mode while the
screen saver is running (The
screen stays black).
28
Press and hold the power switch for four seconds or longer to shut down the computer
forcibly. (Data not saved will be lost.) Then disable the screen saver.
It takes time for the power
indicator to light up.
If the power switch is pressed immediately after the battery pack has been mounted on
the computer, and while the AC adaptor is not connected, it may take about five seconds before the power indicator lights up and the computer turns on. This is because
the computer is checking the remaining battery charge; it is not a malfunction.
You have forgotten the
password.
Supervisor Password or User Password: Contact Panasonic Technical Support.
Administrator password:
If you have a password reset disk, you can reset the administrator password. Set the
disk and enter any wrong password, then follow the on-screen instructions and set a
new password.
If you do not have a password reset disk, reinstall ( page 25) and set up Windows,
and then set a new password.
“Remove disks or other
media. Press any key to
restart” or a similar message
appears.
A floppy disk in the drive or USB memory is connected, and it does not contain system
startup information. Remove the floppy disk and USB memory, connect an external
keyboard and then press any key.
If a device is connected to the USB port, disconnect the device, or set [USB Port] or
[Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
If a device is connected to the ExpressCard slot, disconnect the device, or set [Express
Card Slot] to [Disabled] in the [Advanced] menu of the Setup Utility.

If the problem persists after removing the disk, it may be a hard disk failure. Contact
Panasonic Technical Support.
Starting Up
Windows startup and operation is slow.
Click F9 in the Setup Utility (
Reference Manual “Setup Utility”) to return the
Setup Utility settings (excluding the passwords) to the default values. Start the Setup
Utility and make the settings again. (Note that the processing speed depends on the application software, so this procedure may not make Windows faster.)
If you installed a resident software after purchase, turn off the residence.
Disable Indexing Service in the following menu.
Click [start] - [Search] - [Change preferences] - [With Indexing Service (for faster local
searches)].
The date and time are incorrect
Make the correct settings.
Click
(Start) - [Control Panel] - [Clock, Language, and Region] -
[Date and Time].
Click [start] - [Control Panel] - [Date, Time, Language, and Regional
Options] - [Date and Time].
If the problem persists, the internal clock battery may need to be replaced. Contact
Panasonic Technical Support.
When the computer is connected to LAN, check the date and time of the server.
The 2100 A.D. or later year will not be correctly recognized on this computer.
[Executing Battery Recalibration] screen appears.
The Battery Recalibration was canceled before Windows was shut down last time.
To start up Windows, turn off the computer by the power switch, and then turn on.
[Enter Password] does not
appear when resuming from
sleep (
)/
standby (
)/
hibernation.
Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup Utility
Reference Manual “Setup Utility”).
The Windows password can be used instead of the password set in the Setup Utility.
(Start) - [Control Panel] - [User Accounts and Family Safety] - [Add or
remove user accounts] and select the account, and set the password.
B Click
(Start) - [Control Panel] - [System and Security] - [Power Options] - [Require a password on wakeup] and add a check mark for [Require a password].
A Click [start] - [Control Panel] - [User Accounts] and select the account, and set the
password.
B Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options]
- [Advanced] and add a check mark for [Prompt for password when computer resumes from standby].
Cannot resume.
An error may occur when the computer automatically enters the sleep
standby
or hibernation mode while the screen saver is active. In this
case, turn off the screen saver or change the pattern of the screen saver.
Other startup problems.
Click F9 in the Setup Utility (
Reference Manual “Setup Utility”) to return the
Setup Utility settings (excluding the passwords) to the default values. Start the Setup
Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
Troubleshooting
A Click
A Remove all peripheral devices including an external display.
(Start) - [Computer] and right-click [Local Disk (C:)], and click [ProperB Click
ties].
C Click [Tools] - [Check Now...].
A standard user needs to enter an administrator password.
D Select the option in [Check disk options] and click [Start].
E Click [Schedule disk check] and restart the computer.
*1
A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties].
B Click [Tools] - [Check Now].
C Select the option in [Check disk options] and click [Start].
Connect the external keyboard to the computer, and start it in Safe Mode and check the
error details. When the [Panasonic] boot screen disappears*1 at startup, press and hold
F8 until the Windows Advanced Options Menu is displayed. Select the Safe Mode and
press Enter .
When [Password on boot] is set to [Enabled] in the [Security] menu of the Setup Utility,
[Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you
enter the password and press Enter , press and hold F8.
29
Troubleshooting (Basic)
Entering Password
Cannot log on to Windows.
(“The user name or password is incorrect.” is displayed.)
The user name (account name) includes an “@” mark.
- If another user account exists:
Log on to Windows using another user account, and delete the account that includes
“@”. Then create a new account.
- If no other account exists:
You need to reinstall Windows ( page 25).
Shutting down
Windows does not shut
down.
Remove the USB device and the ExpressCard.
Wait one or two minutes. It is not a malfunction.
Troubleshooting
Display
No display.

The external display is selected. Change the display output destination.

When using an external display,
Check the cable connection.
Turn on the display.
Check the settings of external display.
The display is turned off by the power-saving function. To resume, touch the screen.
) / standby (
) or hibernation
The computer entered sleep (
by the power-saving function. To resume, press the power switch.
The screen is dark.
The screen might be darker when the AC adaptor is not connected. Adjust the brightness by using Dashboard for Panasonic PC. As you increase the brightness, battery
consumption increases.
You can separately set the brightness for when the AC adaptor is connected and when
not connected.
The screen is disordered.
Changing the number of display colors and resolution may affect the screen. Restart the
computer.
Connecting/disconnecting an external display may affect the screen. Restart the computer.
) /standby (
) or hibernation may afResuming from sleep (
fect the screen of the external display. Restart the computer.

During Simultaneous display, one of the screens
becomes disordered.
When using the Extended Desktop, use the same display colors for the external display
as those used by the LCD.
If you continue to experience problems, try changing the display.
A Right-click on the desktop, and click [Graphics Properties].
B Select [Basic mode] and click [OK].
C Click [Display].
A Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Graphics and
Media].
B Select [Basic mode] and click [OK].
C Click [Display].
Simultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.).
When the [Command Prompt] is set to “Full Screen” by pressing Alt + Enter , the
picture is displayed on one of the screens only. When the window display is restored
by pressing Alt + Enter on the external keyboard, the picture is displayed on both
screens.

The external display does
not work normally.
30
If the external display does not support the power saving function, it may not work normally when the computer enters the power saving mode. Turn off the external display.
Display

The cursor cannot be controlled properly.
Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced - Serial Port Setting] of the Setup Utility.
B Click F10 and select [Yes] at the confirmation message, and click Enter (Enter).
The computer will restart.
C Log on to Windows as an administrator.
(Start) and input “c:\util\drivers\gps\GPS.reg” in [Search programs and
D Click
files], and click Enter .
E Click [Yes], click [Yes] and click [OK].
Then restart the computer.
F Click [Click for Enter Setup] that appears at the upper left corner on the screen while
[Panasonic] boot screen is displayed.
G Set [GPS] to [Enabled] in the [Advanced - Serial Port Setting].
H Click F10 and select [Yes] at the confirmation message, and click Enter .
Touchscreen
The cursor does not work.
When using the external mouse, connect it correctly.
Restart the computer using the external keyboard.
Press
and press
two times, and press
to select [Restart] and press Enter .
Press
, U, and R to select [Restart].
If the computer does not respond to the external keyboard commands, read “No response” ( page 32).
Cannot input using the
touchscreen.
Set [Touchscreen Mode] to [Auto] or [Tablet Mode] in the [Main] menu of the Setup Utility.
Cannot point the correct
position using the included
stylus.
Perform the touchscreen calibration (
page 19).
On-screen Document
The document of PDF format is not displayed.
Install Adobe Reader.
According to the language you have selected, the following version of Adobe Reader is
installed.
English: English version
French: French version
German: German version
Other languages: English version
If you need Adobe Reader in a language other than above described languages, download from Adobe web site and install it.
Troubleshooting
Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the Setup
Utility.
A Click [start] - [Run], input the following, then click [OK].
[c:\util\reader\**\Setup.exe]
“**” depends on the language.
English : m
French : f
German : g
If you need Adobe Reader in a language other than above described languages,
download from Adobe web site and install it.
31
Troubleshooting (Basic)
Others
No response.
Press
button to open Task Manager and close the software application that is not
responding.
Connect the external keyboard and press Ctrl + Shift + ESC to open Task Manager and close the software application that is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind another
window. Click Alt +Tab to check.
Press the power switch for 4 seconds or longer to shut down the computer, and then press
the power switch to turn it on. If the application program does not work normally, uninstall
and reinstall the program. To uninstall,
click
(Start) - [Control Panel] - [Programs] - [Uninstall a program].
Troubleshooting
click [start] - [Control Panel] - [Add or Remove Programs].
32
LIMITED USE LICENSE AGREEMENT
THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC PRODUCT (“PRODUCT”)
ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH
THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY
DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses their use to you. You
assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom.
LICENSE
A. Panasonic Corporation hereby grants you a personal, non-transferable and non-exclusive right and license to use
the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are
receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain
no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,
concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of
which title, ownership and rights shall remain with Panasonic Corporation or its suppliers.
B. You may use the Programs only on the single Product which was accompanied by the Programs.
C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or
otherwise, without the prior written consent of Panasonic Corporation.
D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for
any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your
use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs.
E. You may transfer the Programs and license them to another party only in connection with your transfer of the single
Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also
transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation,
to the same party or destroy any such copies not so transferred.
F. You may not remove any copyright, trademark or other notice or product identification from the Programs and you
must reproduce and include any such notice or product identification on any copy of any Program.
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY
TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
TERM
This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate
this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions thereof
set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any
such termination, you agree to destroy, at your expense, the Programs and related documentation together with all
copies thereof in any form.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE
BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR
AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE
SUBJECT MATTER OF THIS AGREEMENT.
Appendix
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
33
Specifications
This page provides the specifications for the basic model. The model number is different according to the unit configuration.
To check the model number:
Check the bottom of the computer or the box the computer came in at the time of purchase.
To check CPU speed, memory size and the hard disk drive (HDD) size:
Reference Manual “Setup Utility”) and select [Information] menu.
Run the Setup Utility (
[Processor Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]: Hard disk drive size
Main Specifications
Model No.
CF-D1A Series
CF-D1D Series
CPU
Intel® Core™ i5-2520M
(2.5 GHz, Intel® Smart Cache 3 MB*1)
Intel® Celeron® Processor 857
(1.2 GHz, Intel® Smart Cache 2 MB*1)
Chip Set
Intel® 6 Series Express Chipsets QM67
Intel® 6 Series Express Chipsets HM65
Video controller
Built-in Chip Set
Main Memory
2 GB*1, DDR3 SDRAM (8 GB*1 Max.)
*2
Video Memory
UMA (<32-bit> 773 MB*1 Max., <64-bit> 776 MB*1 Max.)*3
UMA (1024 MB*1 Max.)*3
Hard Disk Drive
Display Method
160 GB*4 (Serial ATA)
Approx. @@ GB*4 is used as a partition with
recovery tools. (Users cannot use this partition.)
Approx. @@ GB*4 is used as a partition with
recovery tools. (Users cannot use this partition.)
13.3 type with Touchscreen (TFT) (1366 × 768 dots) (16:9)
Internal LCD
65,536/16,777,216 colors
(800 × 600 dots / 1024 × 768 dots / 1280 × 600 dots / 1280 × 720 dots / 1280 × 768 dots /
1360 × 768 dots / 1366 × 768 dots)*5
External Display*6
65,536 / 16,777,216 colors (800 × 600 dots / 1024 × 768 dots / 1280 × 768 dots /
1366 × 768 dots / 1600 × 1200 dots / 1920 × 1080 dots / 1920 × 1200 dots)
Touchscreen
Resistive
Circular Polarizer
Wireless LAN
Intel® Centrino® Advanced - N 6205 (
Bluetooth
Appendix
250 GB*4 (Serial ATA)
Resistive
page 35)
page 35
*7
Wireless WAN*8
Ericsson F5521gw (
LAN
IEEE 802.3 10Base-T / IEEE 802.3u 100BASE-TX / IEEE 802.3ab 1000BASE-T
(2nd LAN*9: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX)
Sound
WAVE and MIDI playback, Intel® High Definition Audio subsystem support
Security Chip
TPM (TCG V1.2 compliant)*10
Card PC Card Slot*11
Slots
ExpressCard Slot
× 1, ExpressCard/34 or ExpressCard/54
SD Memory Card Slot*12
page 35)
× 1, Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA
×1
Contact Smart Card Slot*13 × 1
SIM Card Slot*8
× 2, DDR3 SDRAM, 204-pin, 1.5 V, SO-DIMM, PC3-10600 Compliant
Interface
USB2.0 Ports × 3 or × 4*14 / Serial Port (Dsub 9-pin male)*15 / LAN Port (RJ-45) × 1 or × 2*9 /
VGA Port (Mini DSub 15-pin female)*16 / Microphone Jack (Miniature jack, 3.5 DIA) / Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 Ω, Output Power 4 mW × 2, Stereo) /
Expansion Bus Connector (Dedicated 100-pin female) / Rugged USB2.0 Port *17
Pointing Device
Touchscreen
Button
Security, Application × 3, Function
Fingerprint Reader
34
×1
RAM Module Slot
*18
Array Size : 192 × 4 pixels, Image Size : 192 × 512 pixels, Image Resolution : 508 DPI
Front Camera*19
Specifications differ depending on the model.
Rear Camera
Specifications differ depending on the model.
*20
Main Specifications
Model No.
CF-D1A Series
CF-D1D Series
Power Supply
AC adaptor or Battery pack
AC Adaptor
Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 7.05 A
Battery Pack
Li-ion 10.8 V, Typical 6200 mAh / Minimum 5800 mAh
Operating Time
*21
Charging Time*22
Power Consumption*23
Approx. @@ hours
Approx. @@ W*24 / Approx. @@ W (maximum when recharging in the ON state)
Environment
Physical Dimensions (W × D × H) @@ mm × @@ mm × @@ mm
(excluding projecting parts)
Weight
Approx. @@ kg
Operating
Temperature
Humidity
Storage Temperature
Humidity
Approx. @@ hours
Approx. @@ hours
@@ mm × @@ mm × @@ mm
Approx. @@ kg
-10 °C to 50 °C (IEC60068-2-1, 2)*25
30 % to 85 % RH (No condensation)
-20 °C to 60 °C
30 % to 85 % RH (No condensation)
Software
Base OS
Genuine Windows® 7 Professional
Installed OS*26
Genuine Windows® 7 Professional 32-bit Service Pack 1 / Genuine Windows 7 Professional
64-bit Service Pack 1
Pre-installed Software*26
Adobe Reader, PC Information Viewer, Loupe Utility, Intel® PROSet/Wireless Software, Bluetooth™ Stack for Windows® by TOSHIBA*27, Wireless Switch Utility, Wireless Connection
Disable Utility*28, Battery Recalibration Utility, Infineon TPM Professional Package*28, Protector
Suite QL*18 *28, Aptio Setup Utility, Hard Disk Data Erase Utility*29, PC Diagnostic Utility, Wireless WAN Connection Manager*8, Camera Utility*19 *20, Quick Boot Manager, Dashboard for
Panasonic PC, Display Rotation Tool, Tablet Button Manager, Hotkey Appendix, Power Plan
Extension Utility, Hand Writing, Software Keyboard
IEEE802.11a : 54/48/36/24/18/12/9/6 Mbps (automatically switched)*30
IEEE802.11b : 11/5.5/2/1 Mbps (automatically switched)*30
IEEE802.11g : 54/48/36/24/18/12/9/6 Mbps (automatically switched)*30
IEEE802.11n*31 : (HT20) GI*32 = 400ns: 150/130/115/86/72/65/57/43/28/21/14/7 Mbps
(automatically switched)*30
GI*32 = 800ns: 130/117/104/78/65/58/52/39/26/19/13/6 Mbps
(HT40) GI*32 = 400ns: 300/270/240/180/150/135/120/90/60/45/30/15 Mbps
(automatically switched)*30
*32
GI = 800ns: 270/243/216/162/135/121/108/81/54/40/27/13 Mbps
Standards Supported
IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n
Transmission method
OFDM system, DSSS system
Wireless Channels Used
IEEE802.11a : Channels 36/40/44/48/52/56/60/64/100/104/108/112/116/132/136/140/149/153/
157/161/165
IEEE802.11b/IEEE802.11g : Channels 1 to 13
IEEE802.11n : Channels 1-13/36/40/44/48/52/56/60/64/100/104/108/112/116/132/136/140/14
9/153/157/161/165
RF Frequency Band
IEEE802.11a : 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz
IEEE802.11b/IEEE802.11g : 2.412 GHz - 2.472 GHz
IEEE802.11n : 2.412 GHz - 2.472 GHz, 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz
BluetoothTM 
Bluetooth Version
Appendix
Wireless LAN 
Data Transfer Rates
version 2.1 +EDR (Toshiba Stack)
Transmission method
FHSS system
Wireless Channels Used
Channel 1 to 79
RF Frequency Band
2.402 GHz - 2.480 GHz
35
Specifications
Wireless WAN 
Data Communication
HSUPA
Category 6, 5.7 Mbps
HSDPA (HSPA+) Category 14, 21 Mbps
Other Features
SIM
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*12
*13
*14
*15
*16
*17
*18
*19
*20
*21
*22
*23
Appendix
*24
*25
*26
*27
*28
*29
*30
*31
*32
36
3GPP Release 7
EDGE
GPRS
MultiSlot Class 10
Circuit Switched Data
SMS
Mobile Originated SMS (MO-SMS) / Mobile Terminated SMS (MT-SMS)
FAX
No Support
Voice
No Support
1.8/3 V SIM Support
1 MB = 1,048,576 bytes /1 GB = 1,073,741,824 bytes
Memory size of the factory default depends on the model.
You can physically expand the memory up to 8 GB, but the total amount of usable memory available will be less depending on
the actual system configuration.
A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video
Memory cannot be set by the user. The size of Video memory is allotted depending on the operating system.
1 GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.
A 16,777,216 color display is achieved by using the dithering function.
Display may be impossible using some connected external displays.
Only for model with Bluetooth.
Only for model with wireless WAN.
Only for model with 2nd LAN.
Only for model with TPM.
For information on TPM, refer to the Installation Manual of “TrustedPlatform Module (TPM)” by the following procedure.
Click
*11
UMTS
(Start) and input “c:\util\drivers\tpm\index.hta” in [Search programs and files] and press Enter .
Click [start] - [Run] and input “c:\util\drivers\tpm\index.hta” and click [OK].
Only for model with PC Card slot.
This slot is compatible with High-Speed Mode. Operation has been tested and confirmed using Panasonic SD/SDHC/SDXC
Memory Cards with a capacity of up to 64 GB. Operation on other SD equipment is not guaranteed.
Only for model with Smart Card slot.
Only for model with 4th USB2.0 port.
Only for model with serial port.
Only for model with VGA port.
Only for model with rugged USB2.0 port.
Only for model with Fingerprint reader.
Only for model with front camera.
Only for model with rear camera.
Measured with LCD brightness : 60 cd/m2
Varies depending on the usage conditions, or when an optional device is attached.
Varies depending on the usage conditions, CPU speed, etc.
Approx. 0.5 W when the battery pack is fully charged (or not being charged) and the computer is off.

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.2 W) simply by having the AC adaptor
plugged into an AC outlet.

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.3 W) simply by having the AC adaptor
plugged into an AC outlet.
Rated power consumption. 23-E-1
Do not expose the skin to this product when using the product in a hot or cold environment. ( page 9)
When using in hot or cold environment, some peripherals may fail to work properly. Check the operation environment of the
peripherals.
Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environments.
When using in low temperature environment, startup may become slow or battery operation time may become short.
The computer consumes power when the hard disk is warming up during startup. Therefore, if you are using battery power and
the remaining power is low, the computer may not start up.
When reinstalling Windows using the data of the recovery area on the hard disk, you can select the OS to be installed (either
Windows 7 (32-bit) or Windows 7 (64-bit)). An OS that has been installed at the time of purchase or an OS that has been installed using the hard disk recovery function or the Product Recovery DVD-ROM can be supported.
May not be installed depending on the model.
Must be installed before use.
Perform on the recovery partition. (If this software can not be performed on the recovery partition, perform from the Product
Recovery DVD-ROM)
These are speeds specified in IEEE802.11a+b+g+n standards. Actual speeds may differ.
Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.
Only available when HT40 enabled by the computer and access point which associated supports HT40.
MEMO
37
MEMO
38
39
As an ENERGY STAR® Partner, Panasonic Corporation has determined that this product meets
ENERGY STAR® guidelines for energy efficiency. By enabling available power management
settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving
the user energy.

To learn more about power management, please visit the web site:
www.energystar.gov/index.cfm?c=power_mgt.pr_power_management
Outline of the International ENERGY STAR® Office Equipment Program
The international ENERGY STAR® Office Equipment Program is an international program that promotes energy
saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted products are office equipment such as computers,
displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.
22-E-1

For information about ENERGY STAR®, refer to the following web side:
Web Site: www.energystar.gov
Panasonic Corporation
Panasonic Solutions Company
3 Panasonic Way, Panazip 2F-5,
Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive Mississauga,
Ontario L4W 2T3
Panasonic Computer Products Europe, Panasonic Marketing Europe GmbH
Hagenauer Straße 43
65203 Wiesbaden
Germany
© Panasonic Corporation 2011
PS0611-0
PCE0335A_XP/7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Trapped                         : False
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : Adobe InDesign CS3_J (5.0.4)
Modify Date                     : 2011:06:22 23:06:36+09:00
Create Date                     : 2011:06:22 23:06:36+09:00
Format                          : application/pdf
Title                           : CPE02386ZA_CF-D1mk1_XP7_OI_M.indb
Creator                         : matsu
Document ID                     : uuid:f3d89cfa-2ab7-44de-97aa-4eefedd14c70
Instance ID                     : uuid:60a59ac8-08c6-4432-a638-cd60a9add93f
Page Count                      : 40
Author                          : matsu

EXIF Metadata provided by EXIF.tools