Panasonic of North America 9TGCF-18A Personal Computer Model CF-18 Family User Manual Operating Instructions

Panasonic Corporation of North America Personal Computer Model CF-18 Family Operating Instructions

User Manaul CF 18

OperationStarting Up/Shutting Down............................ 17Touch Pad (Basic Operation) ............................. 20Digitizer (Basic Operation) ................................. 21Operating in Tablet Mode .............................. 22Reference Manual ......................................... 24Useful Information ......................................... 25AppendixLIMITED USE LICENSE AGREEMENT ....... 37Hard Disk Backup Function ............................. 39Hard Disk Data Erase Utility.......................... 43Specifications ................................................ 44LIMITED WARRANTY ................................... 46TroubleshootingList of Error Codes ........................................ 29Dealing with Problems (Summary) .................. 30Reinstalling Software .................................... 35Getting StartedRead Me First ................................................. 3Names and Functions of Parts ........................ 9First-time Operation ...................................... 13Contents[Additional Manual]Reference ManualThis manual can be accessed on your computer. Re-fer to page 24 on how to access the Reference Manual.Reference Manual•Read Me First•Key Combinations•LED IndicatorsReference Manual•Technical Information•DMI Viewer•List of Error Codes•Dealing with Problems(Advanced)AppendixGetting StartedOperationTroubleshootingModel No. CF-18 SeriesTablet PCPlease read these instructions carefully before using this product and save this manual for future use.Reference Manual•Tablet Buttons•Touch Pad•Digitizer (Advanced)•Display Rotation•Standby/HibernationFunctions•Security Measures•Computing on the Road•Battery Power•PC Cards•SD Memory Card•SD Memory CardSecurity Function•RAM Module•Port Replicator•External Display•USB Devices•Modem•LAN•Wireless LAN•Bluetooth•Wireless Switch Utility•Hard Disk Drive•Setup Utility•Icon Enlarger•Loupe UtilityPersonal ComputerOPERATING INSTRUCTIONS
2Getting StartedIntroductionThank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your newcomputer.Illustrations and Terminology in this ManualCopyrightThis manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may bereproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.No patent liability is assumed with respect to the use of the information contained herein.© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.DisclaimerComputer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes noliability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.TrademarksMicrosoft, Windows, the Windows logo and IntelliMouse are registered trademarks of Microsoft Corporation of the United Statesand/or other countries.Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation.SD Logo is a trademark. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in theUnited States and/or other countries.Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of the respective owner companies.NOTE:NOTE provides a useful fact or helpful information.CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.Enter : This illustration means to press the [Enter] key.Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.[start] - [Run]:This illustration means to click [start], then to click [Run]. For some applications, you may need todouble-click. :Where to go for referred information. : This illustration means to refer to the Reference Manual, which is available on your computer.Refer to page 24 on how to access this manual.Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanationeasier to understand.The “CD/DVD drive” is a description about drives, such as DVD-ROM, CD-ROM, CD-R/RW, and DVD-ROM & CD-R/RW drives.In this manual, descriptions are given using illustrations not featuring the hand strap for convenience of explanation.If the user has logged on without administrator authority, some functions may not be executable, and some screens may notbe displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.Confirm the latest information on optional products in catalogs, etc.In this manual, “Microsoft® Windows® XP Tablet PC Edition 2005” is indicated as “Windows” or “Windows XP”.*For the Model No., insert the 12 digit number (for example, CF-18KDHZXVM) located onthe bottom of the computer.Customer's RecordSerial No.orDate of PurchaseModel No.*Code No.Dealer's NameDealer's Address
3Getting StartedRead Me FirstFor U.S.A.Federal Communications Commission RadioFrequency Interference StatementNote: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the Panasonic Service Center or an experienced ra-dio/TV technician for help.WarningTo assure continued compliance, use only shielded interfacecables when connecting to a computer or peripheral. Also, anychanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate this equipment.FCC RF Exposure Warning:This equipment is provided with PC Card slot that could beused with wireless transmitters, which will be specificallyrecommended when they become available.Other third-party wireless transmitters have not been RF ex-posure evaluated for use with this computer and may not com-ply with FCC RF exposure requirements.<Only for models with wireless LAN and/or Bluetooth>This equipment complies with FCC radiation exposure lim-its set forth for an uncontrolled environment.This equipment has been approved for portable operation,and unless otherwise advised in separate supplemental in-structions for individual wireless transmitter(s), requires mini-mum 1.5 cm spacing be provided between antenna(s) and allperson’s body (excluding extremities of hands, wrist and feet)during wireless modes of operation.This equipment may use multiple installed transmitters, whichmay be capable of simultaneous transmission.This equipment is provided with external antenna connector(s)for connection to optional Car Mounter or Port Replicator formobile external mounted antenna(s). External antenna(s) mustbe professionally installed and cannot exceed recommendedmaximum antenna gain as described in individual providedsupplement instructions for wireless transmitters. Also, usermust maintain minimum 20 cm spacing between externalantenna(s) and all person’s body (excluding extremities ofhands, wrist and feet) during wireless modes of operation.<Only for models with wireless LAN>This product is restricted to indoor use due to its operation inthe 5.15 to 5.25 GHz frequency range.FCC requires this product to be used indoors for the frequencyrange 5.15 to 5.25 GHz to reduce the potential for harmful in-terference to co-channel Mobile Satellite systems.High power radars are allocated as primary users of the 5.25 to5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations cancause interference with and /or damage this product.1. This equipment complies with CFR47 Part 68 rules. On thecomputer is a label that contains, among other information,the FCC registration number and ringer equivalence number(REN) for this equipment. If required, this information mustbe provided to the telephone company.2. An FCC compliant telephone cord and modular plug is pro-vided with this equipment. This equipment is designed to beconnected to the telephone network or premises wiring us-ing a compatible modular jack which is Part 68 compliant.See Installation Instructions for details.3. The REN is used to determine the quantity of devices whichmay be connected to the telephone line. Excessive RENs on thetelephone line may result in the devices not ringing in responseto an incoming call. In most, but not all area, the sum of RENsshould not exceed five (5.0). To be certain of the number ofdevices that may be connected to a line, as determined by thetotal RENs, contact the local telephone company.4. If your telephone equipment cause harm to the telephonenetwork, the telephone company will notify you in advicethat temporary discontinuance of service may be required.But if advice notice isn’t practical, the telephone companywill notify the customer as soon as possible. Also, you willbe advised of your right to file a complaint with the FCC ifyou believe it is necessary.5. The telephone company may take changes in its facilities,equipment, operations or procedures that could affect the op-eration of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to makenecessary modifications to maintain uninterrupted service.6. If trouble is experienced with this equipment, for repair orwarranty information, please contact Panasonic Corporationof North America at DIAL TOLL FREE 1-800-LAPTOP5(1-800-527-8675). If the equipment is causing harm to thetelephone network, the telephone company may request thatyou disconnect the equipment until the problem is resolved.7. There are no user serviceable parts contained in this equip-ment.8. This equipment may not be used on coin service providedby the telephone company. Connection to party lines is sub-ject to state tariffs.FCC Regulation Notice for modemThis equipment contains a FCC approved modem.FOR HOME OR OFFICE USETested To ComplyWith FCC StandardsThis device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Responsible Party: Panasonic Corporation of North AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP5 (1-800-527-8675)
4Getting StartedRead Me FirstFor CanadaIndustry Canada (IC) Notice for modemThis equipment contains an Industry Canada approved modem unit.The Industry Canada label is affixed on the modem unit.EQUIPMENT ATTACHMENT LIMITATIONS“NOTICE: The Industry Canada label identifies certifiedequipment. This certification means that the equipment meetstelecommunications network protective, operational andsafety requirements as prescribed in the appropriate TerminalEquipment Technical Requirements document(s). TheDepartment does not guarantee the equipment will operateto the user’s satisfaction.Before installing this equipment, users should ensure that itis permissible to be connected to the facilities of the localtelecommunications company. The equipment must also beinstalled using an acceptable method of connection. Thecustomer should be aware that compliance with the aboveconditions may not prevent degradation of service in somesituations.Repairs to certified equipment should be coordinated by arepresentative designated by the supplier. Any repairs oralterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications companycause to request the user to disconnect the equipment.Users should ensure for their own protection that the electricalground connections of the power utility, telephone lines andinternal metallic water pipe system, if present, are connectedtogether. This precaution may be particularly important inrural areas. Caution: Users should not attempt to make suchconnections themselves, but should contact the appropriateelectric inspection authority, or electrician, as appropriate.”“NOTICE: The Ringer Equivalence Number (REN) assignedto each terminal device provides an indication of themaximum number of terminals allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.”REN: See bottom of the computerRESTRICTIONS CONCERNANT LE RACCORDEMENTDE MATÉRIEL“AVIS: L’étiquette d’Industrie Canada identifie le matérielhomologué. Cette étiquette certifie que le matériel estconforme aux normes de protection, d’exploitation et desécurité des réseaux de télécommunications, comme leprescrivent les documents concernant les exigences tech-niques relatives au matériel terminal. Le Ministère n’assuretoutefois pas que le matériel fonctionnera à la satisfactionde l’utilisateur.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’ilest permis de le raccorder aux installations de l’entrepriselocale de télécommunication. Le matériel doit également êtreinstallé en suivant une méthode acceptée de raccordement.L’abonné ne doit pas oublier qu’il est possible que laconformité aux conditions énoncées ci-dessus n’empêche pasla dégradation du service dans certaines situations.Les réparations de matériel homologué doivent êtrecoordonnées par un représentant désigné par le fournisseur.L’entreprise de télécommunications peut demander àl’utilisateur de débrancher un appareil à la suite deréparations ou de modifications effectuées par l’utilisateurou à cause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer quetous les fils de mise à la terre de la source d’énergieélectrique, des lignes téléphoniques et des canalisationsd’eau métalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régionsrurales. Avertissement: L’utilisateur ne doit pas tenter defaire ces raccordements lui-même; il doit avoir recours à unservice d’inspection des installations électriques, ou à unélectricien, selon le cas.”“AVIS: L’indice d’équivalence de la sonnerie (IES) assignéà chaque dispositif terminal indique le nombre maximal determinaux qui peuvent être raccordés à une interface. Laterminaison d’une interface téléphonique peut consister enune combinaison de quelques dispositifs, à la seule condi-tion que la somme d’indices d’équivalence de la sonneriede touts les dispositifs n’excède pas 5.”IES: Voir sous le fond de l’ordinateurNotice for the products using LCDThis product uses one or more fluorescent lamps containing asmall amount of mercury. It also contains lead in some compo-nents. Disposal of these materials may be regulated in your com-munity due to environmental considerations. For disposal orrecycling information please contact your local authorities, orthe Electronics Industries Alliance: <http://www.eiae.org/>UL1604-conforming model. (The model which has de-scription of “UL1604” in the bottom of the computer.)• THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,DIVISION 2, GROUPS A, B, C AND D OR NON-HAZ-ARDOUS LOCATIONS ONLY.• WARNING – EXPLOSION HAZARD – SUBSTITUTIONOF COMPONENTS MAY IMPAIR SUITABILITY FORCLASS I, DIVISION 2.• When connecting and using a device manufactured by a thirdparty, enquire to the manufacturer as to whether the devicesuits CLASS I, DIVISION 2.9. The Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or other electronicdevice to send any message via a telephone fax machine un-less such message clearly contains in a margin at the top orbottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identificationof the business or other entry, or other individual sending themessage and the telephone number of the sending machine orsuch business, other entity, or individual. In order to programthis information into your fax software, you should refer tothe manual of the Fax software being used.10.According to the FCC’s electrical safety advisory, we rec-ommend that you may install an AC surge arrestor in the ACoutlet to which this equipment is connected. Telephone com-panies report that electrical surges, typically lightning tran-sients, are very destructive to customer terminal equipmentconnected to AC power sources and that this is a major na-tionwide problem.“Caution: To reduce the risk of fire, use only No.26 AWG or larger tele-communication line cord.”“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement desconducteurs de télécommunications 26 AWG ou de section supérieure.”
5Getting StartedCSA C22 2 NO.213-conforming model. (The modelwhich has description of “CSA C22 2 NO.213” in thebottom of the computer.)• THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,DIVISION 2, GROUPS A, B, C AND D OR NON-HAZ-ARDOUS LOCATIONS ONLY.• WARNING – EXPLOSION HAZARD – SUBSTITUTIONOF COMPONENTS MAY IMPAIR SUITABILITY FORCLASS I, DIVISION 2.• When connecting and using a device manufactured by a thirdparty, enquire to the manufacturer as to whether the devicesuits CLASS I, DIVISION 2.<Only for models with Bluetooth>This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la normeNMB-003 du Canada.Declaration of Conformity (DoC)“Hereby, we declare that this Personal Computer is in compliance with the essential requirements and otherrelevant provisions of the Directive 1999/5/EC.”Hint:If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact our webaddress: http://www.doc.panasonic.deContact:Panasonic Services EuropeA Division of Panasonic Marketing Europe GmbHPanasonic Testing CentreNetwork connection.The terminal equipment is intended for connection to the following public network;In all the countries of European Economical Area;- Public Switched Telephony NetworksTechnical Features.The terminal equipment includes the following features;- DTMF dialing- Maximum bitrate receiving mode: 56 kbit/s- Maximum bitrate sending mode: 33.6 kbit/sThis product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Sweden,Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway andAustria.--------------------------------------------------------------------------------------------------------------------------------------------Compliance Notice - CE MarkThis equipment is in conformance with the requirements of the European Council Directive listed below:73/23/EEC Low Voltage Directive with amendment 93/68/EEC89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC1999/5/EC R&TTE--------------------------------------------------------------------------------------------------------------------------------------------For Europe<Only for models with wireless LAN/GPS>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two conditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interfer-ence that may cause undesired operation of the device.<Only for models with wireless LAN>This product (local network devices) for the band 5150-5250MHz is only for indoor usage to reduce potential for harmfulinterference to co-channel Mobile Satellite systems.High power radars are allocated as primary users (meaning theyhave priority) of 5250-5350 MHz and 5650-5850 MHz and theseradars could cause interference and/or damage to LELAN devices.(For models with a “CE” mark on the bottom of the computer)
6Getting StartedRead Me First<Only for models with wireless LAN and/or Bluetooth>This product and your HealthThis product, like other radio devices, emits radio frequency elec-tromagnetic energy. The level of energy emitted by this producthowever is far much less than the electromagnetic energy emit-ted by wireless devices like for example mobile phones.Because this product operates within the guidelines found in ra-dio frequency safety standards and recommendations, we believethis product is safe for use by consumers. These standards andrecommendations reflect the consensus of the scientific commu-nity and result from deliberations of panels and committees ofscientists who continually review and interpret the extensive re-search literature.In some situations or environments, the use of this product maybe restricted by the proprietor of the building or responsible rep-resentatives of the organization. These situations may for exampleinclude:Using this product on board of airplanes, orIn any other environment where the risk of interference to otherdevices or services is perceived or identified as harmful.If you are uncertain of the policy that applies on the use of wire-less devices in a specific organization or environment (e.g. air-ports), you are encouraged to ask for authorization to use thisproduct prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interferencecaused by unauthorized modification of this product. The cor-rection of interference caused by such unauthorized modifica-tion will be the responsibility of the user. We and its authorizedresellers or distributors are not liable for damage or violation ofgovernment regulations that may arise from failing to complywith these guidelines.Information to the UserImportant Safety Instructions / Importantes Mesures De SécuritéWhen using your telephone equipment, basic safety precautionsshould always be followed to reduce the risk of fire, electric shockand injury to persons, including the following:1.Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basementor near a swimming pool.2.Avoid using a telephone (other than a cordless type) during anelectrical storm. There may be a remote risk of electric shockfrom lightning.3.Do not use the telephone to report a gas leak in the vicinity of the leak.4.Use only the power cord and batteries indicated in this manual.Do not dispose of batteries in a fire. They may explode. Checkwith local codes for possible special disposal instructions.SAVE THESE INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendant l’utilisationde matérial téléphonique afin de réduire les risques d’incendie, dechoc électrique et de blessures. En voici quelquesunes:1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’unebaignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver,dans un sous-sol humide ou près d’une piscine.2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sansfil) pendant un orage électrique. Ceci peut présenter un risquede choc électrique causé par la foudre.3.Ne pas utiliser l’appareil téléphonique pour signaler une fuitede gaz s’il est situé près de la fuite.4.Utiliser seulement le cordon d’alimentation et le type de pilesindiqués dans ce manual. Ne pas jeter les piles dans le feu:elles peuvent exploser. Se conformer aux règlements pertinentsquant à l’élimination des piles.CONSERVER CES INSTRUCTIONSLithium Battery!This computer contains a lithium battery to enable the date, time,and other data to be stored. The battery should only be exchangedby authorized service personnel.Warning! A risk of explosion from incorrect installation or mis-application may possibly occur.Pile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet desauvegarder certaines données, notamment la date et l'heure. Lapile ne doit être remplacée que par un technicien qualifié.Danger! Risque d'explosion en cas de non respect de cette miseen garde!Lithium BatteryFor France and Italy<Only for models with Bluetooth>Communication using Bluetooth outdoor is against the law.Do not use Bluetooth outdoors.
7Getting StartedAvoid Magnetic FieldsKeep the computer away from magnets.Data stored on the hard disk may be lost.Keep Small Objects AwayDo not insert paper clips or other small objectsinto the computer.Do Not Disassemble the ComputerDo not attempt to disassemble your computer.Avoid Excessive Force on the DisplayDo not apply excessive downward force on thedisplay when it is completely opened, especiallywhen plugs and/or cables are connected to therear of the computer.Avoiding Low-temperature BurnsAvoid more than casual contact with any heat pro-ducing area of the notebook computer, AC adap-tor, and any option or accessory you use with it.Even low heat (warmer than body temperature),can cause a burn if the skin is exposed to the heatsource for a long period of time.Do not touch the computer and cable when itstarts thunderingDo not connect a telephone line, or a networkcable other than the one specified, into theLAN portIf the LAN port is connected to a network suchas the ones listed below, a fire or electric shockmay result.• Networks other than 100BASE-TX or10BASE-T• Phone lines (Telephone lines, internal phonelines (on-premise switches), digital publicphones, etc.)Keep SD Memory Cards away from infantsand small childrenAccidental swallowing will result in bodily injury.In the event of accidental swallowing, see a doctorimmediately.Avoid Radio Frequency InterferenceDo not place the computer near a television orradio receiver.PrecautionsThe CF-18 was developed based on thorough research into thereal-world portable computing environments. Exhaustive pursuitof usability and reliability under harsh conditions led to innova-tions such has the magnesium alloy exterior, vibration dampedhard disk drive and floppy disk drive, flexible internal connec-tions. The CF-18’s outstanding engineering has been tested us-ing the strict MIL-STD- 810F (for vibration and shock) and IP(for dust and water) based procedures.As with any portable computer device precautions should be takento avoid any damage. The following usage and handling proce-dures are recommended.Before putting the computer away, be sure to wipe off any moisture.Precautions (Battery Pack)Care should be exercised with regard to the following in or-der to avoid the possibility of overheating, fire or damage.Avoid HeatDo not throw the battery pack into a fire orexpose it to excessive heat.Do Not DisassembleDo not insert sharp objects into the battery pack,expose it to bumps or shocks, deform, disas-semble, or modify it.Do Not ShortDo not short the positive (+) and negative (-)contacts.Do Not Put into a MicrowaveDo not put the battery pack into a microwaveoven or a pressurized chamber.Avoid Extreme Heat, Cold and Direct Sun-lightDo not charge, use or leave the battery pack forextended periods where it will be exposed to di-rect sunlight, in a hot place (in a car on a sunnyday, for example), or in a cold place.Keep Articles AwayDo not place the battery pack together with ar-ticles such as necklaces or hairpins when carry-ing or storing.Stop UsingShould the battery emit an abnormal odor, be-come hot to the touch, become discolored,change shape, or become in any way differentfrom normal, remove it from the computer orcharger and stop using it.Do Not Use With Any Other ComputerThe battery pack is rechargeable and was in-tended for the specified computer or charger. Donot use it with a computer other than the one forwhich it was designed.Do not use this computer with a battery packother than the one specified (the one includedwith the computer or the specified batterypack sold separately)Do not touch the terminals on the battery pack. The bat-tery pack may no longer function properly if the contactsare dirty or damaged.Do not expose the battery pack to water, or allow it to be-come wet.
8Getting StartedNOTEThe battery pack may become warm during recharging ornormal use. This is completely normal.Recharging will not commence if internal temperature ofthe battery pack is outside of the allowable temperaturerange (0 °C to 50 °C {32°F to 122 °F}) “Bat-tery Power”. Once the allowable range requirement issatisfied, charging begins automatically. Note that the re-charging time varies based on the usage conditions. (Re-charging takes longer than usual when the temperature is10 °C {50 °F} or below.)If the temperature is low, the operating time is shortened. Onlyuse the computer within the allowable temperature range.This computer has a high temperature mode function thatprevents the degradation of the battery in high tempera-ture environments. ( “Battery Power”) A levelcorresponding to a 100% charge for high temperature modeis approximately equivalent to an 80% charge level fornormal temperature mode.The battery pack is a consumable item. If the amount oftime the computer can be run by using a particular batterypack becomes dramatically shorter and repeatedrecharging does not restore its performance, the batterypack should be replaced with a new one.When transporting a spare battery inside a package,briefcase, etc., it is recommended that it be placed in aplastic bag so that its contacts are protected.Always power off the computer when it is not in use.Leaving the computer on when the AC adaptor is notconnected will exhaust the remaining battery capacity.If the battery pack will not be used for a long period of time(a month or more), charge or discharge (use) the battery packuntil the remaining battery level becomes 30% to 40% andstore it in a cool, dry place.This computer prevents overcharging of the battery by re-charging only when the remaining power is less than approx.95% of capacity.The battery pack is not charged when the computer is firstpurchased. Be sure to charge it before using it for the firsttime. When the AC adaptor is connected to the computer,charging begins automatically.Should the battery leak and the fluid get into your eyes, do notrub your eyes. Immediately flush your eyes with clear waterand see a doctor for medical treatment as soon as possible.Precautions (Battery Pack)Read Me FirstWarning: Notebook Computer may be installed in a motor ve-hicle and visible to the driver only if used to support vehiclerelated functions such as vehicle information, system control,rear or side observation and navigation. If used for entertain-ment purpose, such as television reception or video play, it mustbe installed to the rear of the driver’s seat where it will not bevisible, directly or indirectly, to the operator of the motor ve-hicle. Check with individual state/provincial laws to determinelawful use of this product while operating within a motor ve-hicle.Avertissement: L’ordinateur bloc-notes peut être installé dans unvéhicule motorisé et dans le champ de vision du conducteuruniquement en tant que dispositif d’aide aux fonctions duvéhicule, comme par exemple pour fournir des informations surle véhicule, comme dispositif de contrôle de système, pourl’observation à l’arrière ou sur les côtés du véhicule, ainsi quepour fournir de l’information routière. Pour toute utilisation à finde divertissement, comme par exemple pour regarder la télévisionou jouer à des jeux vidéo, il doit être installé à l’arrière du siègedu conducteur, en un emplacement où il ne sera pas visible, nidirectement ni indirectement, pour le conducteur du véhiculemotorisé. Vérifiez les lois fédérales et nationales qui régissentl’utilisation légale de cet appareil à l’intérieur d’un véhiculemotorisé.For Used in Motor Vehicle /Pour L’utilisation Dans Un VéhiculeMotorisé
9Getting StartedNames and Functions of Parts( “Wireless LAN”)Wireless LAN AntennaFor information on the key com-binations available. ( “Key Combinations”)LCD ( “Hard Disk Drive”)( “Battery Power”)Keyboard( “LED Indicators”)Caps LockNumeric Key (NumLk)Scroll Lock (ScrLk)Hard disk drive statusBattery pack statusPower status( “Tablet Buttons”)LCD brightness controlInput PanelEnterRotationSecurity( page 20)Touch PadPenPower Switch( page 21)( page 21)Function KeysHard Disk DriveBattery PackA lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour desrenseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.Tablet ButtonsThe illustrations shown may differ from the actual physical appearances.CAUTIONDo not cover the computer with a thick cloth, such as a blanket.<Only for models withwireless LAN>LED Indicators( “Bluetooth”)Bluetooth Antenna<Only for models with Bluetooth>
10Getting StartedNames and Functions of Parts( “Modem”)Modem( “LAN”)LANA cable can be connected. For more in-formation, read the manual providedwith the cable.LOCK( “External Display”)Use only a monaural condenser micro-phone (miniature jack). Using an inputsource other than a monaural condensermicrophone may not allow audio to beinput or may damage the equipment.Microphone JackUse this jack to connect headphones oramplifier-equipped speakers. Audio out-put from the internal speaker is disabledwhen headphones or external speakersare connected.Headphone JackSecurity Lock External Display PortThe strap has been designed to carry only the weight of the com-puter. Therefore, be sure that the strap does not carry a weightthat exceeds the weight of the computer. The strap may acciden-tally come loose from the computer.Do not use a strap that is damaged or about to tear.CAUTIONThe hand strap can be attached to any two of the four corners usingscrews (A) which were used to attach the hand strap.Adjust the length of the belt so that the computer does not fall by mis-take, and firmly hold the computer when using it.(The above illustration shows the positionwhere the hand strap is attached at the factory.)The shoulder strap can be connected to the handstrap to make it longer.Hand StrapShoulder StrapCAUTIONDo not connect the mo-dem telephone cable intothe LAN port.( “PC Cards”)( “USB Devices”)USB PortsDC IN 16 VDC-IN JackPC Card Slots( “SD Memory Card”and “SD Memory Card SecurityFunction”)SD Memory Card Slot( “LED Indicators”)SD Memory Card Indicator
11Getting StartedTo adjust the volume: Fn + F5 / Fn + F6Speaker on/off : Fn + F4( “Port Replicator”)Speaker( “RAM Module”)RAM Module SlotCAUTIONDo not allow metallic objects or magnetic me-dia to come near the speaker on the bottom sur-face of the computer.• Because the speaker contains a magnet, metalobjects may become attached to the bottomsurface of the computer. This may cause thecomputer to be unstable, or may mark the sur-face of the desk on which it is sitting.• If floppy disks, magnetic memory cards, orother magnetic media approach the speaker,there is a risk that data will be destroyed.Expansion Bus ConnectorCAUTIONDo not allow metallic objects or mag-netic media to come near these areas.
12Getting StartedUsing the TetherThe tether can be attached to the bottom right or bottom left corner of the display. It prevents thepen (included) from falling accidentally.Attaching the Tether1234TetherCAUTIONWhen closing the display, be careful not to catch the tether between the display and mainpart of the computer. (See the figure below.)Names and Functions of Parts
13Getting Started1First-time OperationRead the steps below to help you learn what parts are included, and to gain an understanding ofsome basic computer-related operations.1Confirm the inclusion of all parts.Make sure the parts shown in the figure have been supplied. If any of these items aremissing or are not working properly, contact Panasonic Technical Support.3Insert the battery pack.Unlock the cover by sliding the latch to the right.1CAUTIONDo not touch the terminals on the battery pack and the computer. The bat-tery pack may no longer function properly if the contacts are dirty or dam-aged. Also, the computer may not operate properly.Be sure to insert the battery pack as illustrated.2Slide the latch down, and then without releasing it, open the cover as illustrated.3Slide the battery pack inward until it is firmly in place.2Read the LIMITED USE LICENSE AGREEMENT. ( page 37)Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the sealon the computer’s packaging.Model No : CF-AA1623AAC adaptor ..........1Model No : CF-VZSU30BAC Cord ...............1 Battery Pack ........1Modem TelephoneCable ......................1Operating Instructions(This book)*1................. 1Windows® Book .... 1Product RecoveryCD-ROM................. 4( “Digitizer (Advanced)”)Soft Cloth ...............1Confirm that the latch lock is correctly in place. If you carry your com-puter without the latch lock in place, the battery pack may fall out.Before using the battery pack, carefully read “Precautions (Battery Pack)”( page 7-8).CAUTION4Close the cover until it clicks into place.LatchCover234Pen..........................1Tether ...................... 1 Shoulder Strap ........1( page 10)( page 12)5Lock the cover by sliding the latch to the left.5*1If additional instructions are included with the computer, be sure to read them. It may benecessary to perform additional operations during the following procedures.
14Getting StartedFirst-time Operation5Open the display.1Pull up latch A and release latch B.2Lift open the display.Slide the power switch and hold it for approximately one second until the power indi-cator turns on before releasing it.CAUTIONConnect your computer to a power outlet.CAUTIONBe sure the AC adaptor is connected until completing the first-time use operation.When using the computer for the first time, do not connect any peripheral de-vice except the battery pack and AC adaptor to the computer.Handling the AC adaptorDo not twist or pull the AC power cord forcefully. Doing so may damage theconnections.Use only the specified AC adaptor with your computer. Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunder andlightning. Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless the battery pack is installed.46Turn your computer on.Latch ADo not slide the power switch and hold it for more than four seconds; this willcause the power to be turned off forcibly.Do not slide the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.Setup Windows.Moving the cursor or clicking buttons can be performed with the touch pad (page 20).Latch B21Power Switch Power Indicator 1At [Welcome to the Windows XP Setup Wizard], select [Next].2After reading the agreement, select [I accept this agreement] or [I don’t accept thisagreement], then select [Next].NOTE If [I don’t accept this agreement] is selected, the Windows setup will be aborted.Do not press any keys or touch the touch pad until [Windows XP ProfessionalSetup] is displayed.CAUTION3Select settings for your region, then select [Next].4Enter your name and organization and then select [Next].7DC-IN JackDC IN 16 V
15Getting Started1Select [start] - [Control Panel] - [User Accounts] - [Create a new account].5Enter your computer name and administrator password and then select [Next].CAUTIONRemember this password! If the password is forgotten, Windows cannot beoperated.6Enter the correct date, time and time zone, then select [Next].NOTEIt may take some time before the computer restarts and the screen of step 7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc.The computer will restart.7Enter your administrator password and select .8Create a new account.If the cursor can not be pointed correctly with the pen, perform [Calibration] in [start]- [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].When you perform the calibration, hold the pen at the same angle as you wouldwhen actually using it.Perform the calibration separately for [Landscape] and [Portrait].NOTEIf the message “Wait several minutes while the optimal configuration isbeing set. Do not shutdown the computer during this process.” is displayed,wait and do not press any keys, or touch the touchpad, etc.When Windows setup is completed, the following message will be displayedat the bottom right of the screen: “Your computer might be at risk.” Con-tinue to the next step.The message is generated by the [Security Center] function in [Control Panel],and does not indicate an error or malfunction. For more information about“Security Center”, page 26.NOTEWhen creating a new user account:• If you make mail settings, create password reset disks ( page 16), orconduct other related operations before creating the user account, youwill be unable to use any previous mail history or settings.• When you create the first new account, you can only select [Computeradministrator].Once a “Computer Administrator” account has been created, you can cre-ate additional limited user accounts.Note also that only the added user account will be displayed in the Wel-come screen. The account for the administrator created during Windowssetup will not be displayed.2Enter a name for the new account, then select [Next].3Select [Computer administrator], then select [Create Account].4<When you want to create a password for the new account>Select the new account you have created and select [Create a password].Follow the instructions on the screen to create a password.CAUTIONRemember this password! If the password is forgotten, Windows cannot beoperated. You can create a password reset disk beforehand. ( page 16)5Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
16Getting StartedDepending on the Windows settings, installed applications, and drivers, menus andother displays may differ, or some functions (such as use of the password reset disk)may be inoperable. Check with your system administrator for details.You can select Classic view for the Control Panel or select the Classic Start menu.You can also change the way a user logs on or off.The procedure in this manual uses the method or view of the Windows XP defaultsetting (not Classic view or Classic Start menu etc.).Resetting the passwordWindows XP has a function to reset a forgotten password.To use this function, you need to create a password reset disk beforehand followingthe steps below.1Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.2Select [start] - [Control Panel] - [User Accounts].3Select the account you used to log on and select [Prevent a forgotten password]from [Related Tasks] menu.Create a password reset disk following the on-screen instructions.Store the password reset disk in a safe place.• Only the logon password for each account can be reset.The password set in the Setup Utility ( “Setup Utility”) cannot be reset.Information for Windows XPFirst-time OperationThis concludes the first-time use operation guidelines.About the Icon Enlarger:• If the characters or icons on the screen are too small and difficult to see, after complet-ing step 8, select [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. This willallow you to magnify the display of characters and icons on the screen.• The [Icon Enlarger] can be set separately for each account.You can also use [Loupe Utility], which enlarges a part of the screen. ( “LoupeUtility”)<Only for models with wireless LAN>If you use the wireless LAN, be sure to refer to “Wireless LAN”.NOTE
17Operation1Open the display.Starting Up/Shutting DownStarting Up2Turn your computer on.Slide the power switch and hold it for approximately one second until the powerindicator turns on before releasing it.2CAUTIONWhile booting, avoid the following until the hard disk drive indicator hasturned off.• Connecting or disconnecting the AC adaptor.• Touching the power switch or the tablet buttons.• Performing any keyboard, touch pad, digitizer (or external mouse) opera-tions.• Closing the display.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.When using this computer with the battery pack only, it may take some timefor the power to turn on after sliding the power switch. In this case, slide thepower switch and hold it for more than one second. This phenomenon occursbecause the standby power is minimized while the power is turned off; it isnot a malfunction.When the CPU temperature rises, the computer may not power on to preventthe CPU from overheating. Should this happen, allow the computer to cooldown then switch the power on again.If the computer still does not power on, contact Panasonic Technical Support.Pull up latch A and release latch B.11Lift open the display.2Latch BPower Switch Power Indicator Latch AWhen the power is turned on in a low-temperature environment, sometimesthe message “Warming up the system. Please wait...” is displayed (up to 25minutes) or the battery indicator alternately blinks green and orange. This func-tion is designed to prevent hard disk drive malfunctions that may occur at lowtemperatures. Wait for the computer to start up.NOTE
18OperationStarting Up/Shutting DownThe power saving function is factory set, so if there is no input from a key, the touchpad, the tablet button, the digitizer or an external mouse (when one is connected) fora certain interval of time, the power to the LCD and hard disk may be turned off. TheLCD will resume operation when the touch pad, the digitizer or an external mouse(when one is connected) is used or a key or the tablet button is pressed.The power to the LCD may be turned off even when an application software is beinginstalled. In this case, because it is conceivable that a selection dialog box will beshown, do not press Space or Enter to attempt to resume from this conditionas doing so may trigger a selection, but instead, press a key unrelated to the directtriggering of a selection, like Ctrl .In addition, when the computer is left alone, it automatically enters the standby orhibernation mode. The computer will resume by sliding the power switch. ( “Standby/Hibernation Functions”)NOTE3Log on to Windows.After confirming that the hard disk drive indicator has turned off, select the user andinput the password, then select . Until the correct password is entered, the computerwill not operate.4Select your application.You are able to start working on your computer. Enter your password*1 and press Enter . ( “Security Measures”)Will Start Will Not Start(Power off)If [Enter Password] is displayed,*1Supervisor Password or User Password set in the Setup Utility (not theWindows password).Three incorrect attemptsorNo password for about aminuteThe correct passwordEnter Password [ ]
19OperationShutting Down (power off your computer)To quickly resume computer operation after shutting down,The standby or hibernation function is available ( “Standby/HibernationFunctions”).When you leave the computer or interrupt your work...If you use the “Standby” or “Hibernation” function, then when you turn on thepower next time, the application software and files you were using before will bedisplayed, and you can restart the same operations immediately ( “Standby/Hibernation Functions”).NOTE1Save important data and close each application.2Select [start] - [Turn Off Computer].3Select [Turn Off].Your computer will power off automatically.Restarting your computer (without shutting down)Select [Restart].To shut down using the keyboard;Press , U , and select [Turn Off] with U .CAUTIONDo not do the following during the shutdown/restart procedure.• Connecting or disconnecting the AC adaptor.• Touching the power switch.• Performing any keyboard, touch pad, digitizer, tablet buttons, or external mouseoperations.• Closing the display.4Close the display.1Close the display.2Pull up latch A.3Position latch B on the display side, then bring latch A down to fix the display inplace.Latch A213Latch ALatch B
20OperationTouch Pad (Basic Operation)Use the touch pad to move the cursor on the display and perform normal computer operations.For more details, refer to “Touch Pad”.Handling the Touch PadBy design the touch pad is to be used with a finger tip only. Do not place any object on thework surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard objectsthat can leave marks (e.g., pencils and ball point pens).Try to avoid having any harmful substances such as oil, come in contact with the touch pad.The cursor may not work properly in such cases.When the touch pad becomes dirty:Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied withdetergent diluted with water and then thoroughly wrung.Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,e.g., discoloration. In addition, do not use commercially-available household cleaners andcosmetics, as they may contain components harmful to the surface.orTwo quick taps, but onthe second tap leavingyour finger down (apply-ing pressure) and movingit on the work surface.While holding down thebutton, moving your fin-ger on the work surface.orFunction Touch Pad OperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingorMove the tip of your finger lightlyover the work surface.tapping clickingdouble-tappingLeft ButtonRight ButtonWork Surfacedouble-clickingTo right-click: click with the right button.
21OperationDigitizer (Basic Operation)Your computer is equipped with a digitizer function allowing you to perform the same operationsas the touch pad or mouse by touching the surface of the display with the pen (included). (Thefollowing explanation gives one example (for the default settings).)The operation settings can be changed. For detailed information, refer to “Digitizer (Advanced)”. Moving the cursor Double-clicking Clicking DraggingTwo quicktapsOne tap Right-clickingHandling the DigitizerUse the pen included with the computer. You cannot use an implement other than the pen thatcomes with the computer.Do not place any object on the surface or press down forcefully with sharp-pointed objects(e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens).Do not operate the computer when such things as dust are on the screen. Doing so mayscratch the screen.When the screen becomes dirty:Wipe to remove dirt by using a dry soft cloth included with the computer.• Do not use benzene or thinner, or rubbing alcohol.• For more information, refer to “Suggestions About Cleaning the LCD Surface” that comeswith the soft cloth.Because the digitizer uses electromagnetic induction, it may malfunction in locations such asthe following, where strong electrical fields or magnetic fields occur:• Near AM radio base station or relay station antennas• Near some CRT displays that generate strong electromagnetic field noiseEven if the digitizer does malfunction, it will return to normal operations when the computeris no longer in close proximity to the locations described above.Handling the PenThe pen has a built-in pressure sensor to detect the touch of the pen tip. Avoid strong shocks(such as dropping the pen), excessive pressure on the pen tip, or allowing the pen to becomewet. These may result in malfunctions or damage to the pen.Clean the pen tip and screen prior to operation. Foreign particles can scratch the screen andimpede the operation of the pen.Use the pen only for the computer screen. Using it for any other purpose may damage the penand scratch the screen.Do not move the pen too quickly. If the pen moves too quickly, the cursor may be unable tofollow its movement.Touch and hold the object (i. e.file or icon), move the pen onthe surface (dragging the ob-ject to the desired location),then release the pen.Pen ButtonPress and hold downthe pen button, thentap the object.You can move the cursor bybringing the pen close to thescreen, without actuallytouching the screen’s surface.Cursor Pen
22OperationOperating in Tablet ModeUsage ExampleIn Tablet Mode, the computer can be operated while holding the body as shown in the figure.In addition to being used as a regular notebook computer (Laptop mode), this computer can alsobe operated in Tablet mode. Simply turn the display around 180°, and close the computer withthe display facing up. In Tablet mode, the computer can be operated using the digitizer (page 21), the Input Panel and the tablet buttons ( “Tablet Buttons”), instead of theinternal keyboard and the touch pad.Set the computer in Tablet mode using the following procedure.1Open the display so that it is perpendicular with the body of the computer.2Slide latch C to the right, and then without releasing it, turn the display clockwise by 180°.3Close the computer with the display facing up.CAUTIONDo not rotate the display more than 180° or attempt to rotate the display counter-clockwise.21345Latch ALatch BTo return to Laptop mode:Perform the steps for changing the computer intoTablet mode, only in reverse order.1Pull up latch A and release latch B.2Open the display.3Slide latch C to the right, and then without re-leasing it, turn the display counter-clockwiseby 180°.NOTE4Pull up latch A.5Position latch B on the display side, then bring latch A down to fix the display in place.Latch A22Latch CLatch C
23OperationChanging the Display SettingsTo rotate the displayPress the rotation button until the display is set at the anglethat is most comfortable for you.For detailed information, refer to “Display Rotation”.To adjust the brightness of LCDPress the LCD brightness control buttons .You can set the computer so that the display automatically rotates to your preferredangle when changing from Laptop mode to Tablet mode or vice versa. ( “Display Rotation”)NOTE PenTablet ButtonsLCD brightness controlInput PanelEnterRotationSecurityInputting CharactersPress the Input Panel button or select on the taskbar.[Tablet PC Input Panel] shown below will appear, and characters can be input with the pen(included). For detailed information, refer to Windows help.When using the digitizer function, use only the pen included with the computer.NOTE
24OperationReference ManualIllustrations may be difficult to view depending on the magnification. If the illustration istoo small, magnify the display.If a printer is connected, we recommend printing the pages required. Depending on theprinter, the illustrations and display samples may not be printed with a high quality.NOTEThe Reference Manual and the Important Battery Tips can be accessed on your computer. Whena printer is connected, these manuals can also be printed.Reference ManualThe Reference Manual explains functions for you to make greater use of the computer, suchas how to add peripheral devices, how the Setup Utility works, and other useful information.(Refer to the cover of this manual for a list of the main contents included.)How to access the Reference ManualSelect [Reference Manual] in [start].Important Battery TipsImportant Battery Tips provides information on how to maximize use of the battery pack,which is necessary for computing away from your home or office.How to access the Important Battery TipsSelect on the desktop.Important Battery Tips can also be accessed from [start] - [All Programs] - [Panasonic] -[On-Line Manuals] - [Important Battery Tips].When the Reference Manual or Important Battery Tips is accessed for the first time, the LicenseAgreement of the Adobe Reader may be displayed. If it is displayed, after reading the agreement,select [Accept] to access the Reference Manual or Important Battery Tips.Refer to Adobe Reader Help to use the Adobe Reader.Reference Manual / Important Tips
25OperationUseful InformationEnvironmentOperation: Temperature: 5 °C to 35 °C {41 °F to 95 °F}Humidity : 30% to 80% RH (No condensation)Storage: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}Humidity : 30% to 90% RH (No condensation)Even within the temperature and humidity ranges noted above, using the computer forlong periods of time in an environment with exceptionally low or high temperatures orhigh humidity may result in deterioration of the product, which can lead to a reduction inproduct life.Usage EnvironmentNOTEOnly use the computer within the allowable temperature range.When the computer is left powered on in a low temperature environment, set [Turn offhard disks] to [Never] in the following menu to avoid damage to the hard disk drive.[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [PowerSchemes] Places not to use your computerSuch areas may result in damage to the computer.Areas with electronic equipmentThese areas may interfere with your display or cause your computer to produce strangesounds.Areas with extremely high/low temperaturesDo not leave things near the computer that are sensitive to heat. During operation, thecomputer may become warm.Before putting the computer away, be sure to wipe off any moisture.HandlingThis computer has been designed so as to minimize shock to the LCD and hard disk drive, theleakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against suchtrouble. Therefore, as a precision instrument, be extremely careful when handling.When carrying the computer, be sure to keep to the following:Turn off the computer.Remove all external devices, cables, PC Cards protruding from the computer (see the figureon the left) and SD Memory Cards before transporting the computer.Do not drop or hit your computer against solid objects.Do not place the computer upright or allow it to tip over. When the computer receivesextremely strong shock after falling, the hard disk or floppy disk drive, etc., may becomeinoperable.Do not carry the computer while the display is open, or carry it by gripping the display.Do not put anything (e.g., a piece of paper) between the display and keyboard.When taking an airplane, always carry your computer with you. Never check it in withluggage. Before using the computer inside an airplane, we recommend asking the airlinesregarding their policy on this issue.When transporting a spare battery pack inside a package, briefcase, etc., it is recommendedthat it be placed in a plastic bag in order to protect its contacts.We recommend the following:Preparing a fully charged battery pack.Making backup copies on discs and carrying them with you.
26OperationUseful InformationTouch Pad page 20MaintenanceAreas excluding the displayWipe these areas with a soft cloth, after applying water or detergent diluted with water to thesoft cloth and firmly wringing out excess water.DisplayUse the Soft Cloth included with the computer. (For more information, refer to “SuggestionsAbout Cleaning the LCD Surface” that comes with the Soft Cloth.)If the Protective Film becomes damaged, it may be time to replace your Protective Film. TheProtective Film is a disposable item. To find out the model number of your Protective Film,contact Panasonic Technical Support. (For more information, refer to the “Operating Instruc-tions” that come with the Protective Film.)Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect thesurface, e.g., discoloration. In addition, do not use commercially-available householdcleaners and cosmetics, as they may contain components harmful to the surface.Do not directly add or spray water or detergent. If liquid enters the inside of the com-puter, it may cause it to work improperly or be damaged.CAUTIONDo not touch the screen before you re-attach a Protective Film, as you may leave a markor a scratch on the screen.CAUTIONSecurity Center/Antivirus ProtectionUse the Windows Security Center function to protect Windows from damage by computerviruses, etc.Windows Security CenterWhat is Windows Security Center?The Windows Security Center allows centralized management of Windows security infor-mation, and monitors antivirus measures and other Windows security settings to ensureoptimum safety.Use the Windows Security Center function to protect your computer from damage by vi-ruses, etc.Select [start] - [Control Panel] - [Security Center] to display the current settings for thefollowing security functions.• Windows FirewallA security system for protecting the computer from unauthorized access via the Internetor other external networks.The firewall regulates the data exchanged between the computer and the external net-work, so that only approved data can pass through.At the time of purchase, the Windows Firewall is set to be enabled.• Automatic UpdatesIf your computer is connected to the Internet, this function regularly checks whether secu-rity updates and other important updates have been made available, and automaticallyinstalls these updates in their latest conditions.• Virus ProtectionThis function regularly checks whether antivirus software has been installed in the com-puter, and whether the version of that software is the latest version available.
27OperationSaving Data on the Hard DiskDo not expose your computer to shock.Use care when handling your computer, shock may damage your hard disk or make yoursoftware applications and data unusable.Do not power down your computer while software applications are running or harddisk drive indicator is on.Properly shut Windows down to avoid problems.Save all valuable data to disks.Backing up data to disks will limit damage should trouble occur to your computer or shouldyou inadvertently change or erase data.Use the security function for all important data. ( “Security Measures” and“SD Memory Card Security Function”)Hard Disk LockWhen the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to thehard disk when the hard disk is installed in a different computer. When the hard disk isreturned to the original computer, you can read/write data as before. In this case, however,make the settings in the Setup Utility exactly the same as they were before the hard diskwas removed. (Note that this Hard Disk Lock does not guarantee the complete protectionof data.) ( “Security Measures”)Users are advised to purchase the latest versions of virus protection software and usethem regularly.We recommend you run the software:• When booting your computer.• After receiving data.We recommend that you check data received on disks or from external sources, such as datadownloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before run-ning a check).For Data Execution Prevention (DEP), you can make one of the settings in the following menu.[start] - [Control panel] - [Performance and Maintenance] - [System] - [Advanced] - [Settings](in [Performance]) - [Data Execution Prevention]For more information, refer to Windows help.Computer VirusesRead the message, select (red icon) on the taskbar, and make the appropriate settings.This message, which the Windows Security Center ( page 26) displays to confirm the security-related settings regularly, will be displayed until the settings are made more properly.If the message “Your computer might be at risk” is displayedNOTEThis message does not indicate an error. You can use the computer while the message isdisplayed. However, in order to operate the computer more safely, we recommend mak-ing the appropriate measures to reduce damage from virus and other attacks, thus avoid-ing the appearance of this message.Windows UpdateYou can use the latest patches and service packs for Windows with the following menus.Do not apply “Driver Updates” even if a message to update a driver appears. If a driverupdate is required, contact Panasonic Technical Support. ( page 46)[start] - [All programs] - [Windows Update]In Windows XP, security functions have been strengthened with regard to Web contents.One of these is the “Pop-up Blocker,” which may prevent some Web pages from being dis-played.The Pop-up Blocker
28OperationTo prevent theft of data or unauthorized access to the hard diskvia a wireless LAN.If you plan to use wireless LAN functions, we recommend that you do so only after makingthe appropriate security settings, such as for data encryption.Wireless LAN (only for models with wireless LAN)When Disposing of or Transferring Ownership of This DeviceWhen disposing of or transferring ownership of this device, erase all data on the hard disk in orderto prevent the theft of hard disk data. Even if you delete data or initialize the hard disk throughnormal Windows commands, data can still be read using special software. In order to erase alldata, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility(included) ( page 43). (Note that this hard disk data erase utility does not guarantee that datawill be completely erased.)Also, note that if you transfer ownership of this device without deleting commercial soft-ware that you have installed to the hard disk, you may be in violation of the licensingagreement for that software.When Changing Hard Disk PartitionsWhen using the hard disk backup function, divide the hard disk into partitions when a backuparea is created ( page 39). If you divide the hard disk into partitions before creating thebackup area, the backup area cannot be created.When Using Peripheral DevicesPay strict attention to the following points to avoid damage to the computer, peripheral devices,cables, etc. Also, in addition to following this manual and the Reference Manual, carefully readthe instruction manuals for the peripheral devices being used.Use only peripheral devices that conform to the computer’s specifications.Connect the devices properly, paying close attention to the condition and position of theconnectors.If a connection cannot be made easily, do not apply undue force; check once more to confirmthe condition and position of the connector (alignment of pins, etc.).If the connector has holding screws, fasten the screws firmly.Do not carry the computer with cables attached, and do not pull on the cables forcefully.Useful Information
29TroubleshootingList of Error CodesWhen turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below.If the problem persists, or if the error code or message displayed is not shown here, contact Panasonic Technical Support ( page 46).Error Code/Message0211: Keyboard error0251: System CMOS checksumbad - Default configurationused0271: Check date and time set-tings0280: Previous boot incomplete- Default configuration usedPress <F2> to SetupOperating System not foundExtended RAM Module FailedActionIf an external keyboard or mouse is connected, disconnect these devices.An error has occurred in the memory that stores the Setup Utility settings. This error occurswhen the memory content is changed through some inadvertent operation by a program orother function.Run the Setup Utility and load the default values, then change the settings to the appropri-ate values as needed.If the problem persists, the internal clock battery may need to be replaced. Contact PanasonicTechnical Support.The date and time setting are incorrect.Run the Setup Utility and set the date and time correctly.If the problem persists, the internal clock battery may need to be replaced. Contact PanasonicTechnical Support.Startup has failed repeatedly, so the Setup Utility settings have been returned to their defaultvalues, and the computer has been booted. Run the Setup Utility and load the default values, then change the settings to the appropri-ate values as needed.Write down the error details and press F2 to run the Setup Utility. Confirm the settings,and change the settings to the appropriate values as needed.The OS is not properly installed on the floppy disk or the hard disk that you are trying to boot from.If the computer cannot be booted from the floppy disk, check the floppy disk drive toensure that the disk is in fact bootable, and use another bootable disk if not.If the computer cannot be booted from the hard disk, confirm whether the hard disk isproperly recognized in [Information] menu of the Setup Utility.• If the hard disk is recognized, perform the reinstallation procedure.• If not, contact Panasonic Technical Support.If a device is connected to the USB port, disconnect the device, or run the Setup Utilityand set [Legacy USB Support] in [Advanced] menu to [Disable].If the extended RAM module has not been inserted properly, or if an extended RAMmodule other than one matching the specifications has been inserted, a beep will soundand the message “Extended RAM Module Failed” will be displayed when turning thepower on. In this case, turn the power off, confirm that the extended RAM module meetsthe specifications, and reinsert it. To run the Setup Utility1Restart the computer.2Press F2 while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure.
30TroubleshootingDealing with Problems (Summary)The power indicator is notlitThe computer does not op-erate when a USB device isconnected[Enter Password] is dis-playedPOST Startup Error(s) isdisplayedWindows startup, or an op-eration is extremely slowThe date and time are incor-rectWhen resuming from thestandby or hibernationmode, [Enter Password]does not appear even if apassword has been set in theSetup UtilityWhen the administratorpassword is forgottenWhen “Remove disks orother media. Press any keyto restart” (or a similar mes-sage) is displayed[Executing BatteryRecalibration] screen is dis-playedCheck the cable connection for the AC adaptor.Check to see if a charged battery pack is properly installed.Remove the battery pack and disconnect the AC adaptor, then connect them again.The computer may not operate when certain USB devices are connected. Disconnect theUSB device, or set [Legacy USB Support] to [Disable] in [Advanced] menu of the SetupUtility.Input your Supervisor Password or User Password. If you have forgotten it, contact Pana-sonic Technical Support. page 29Press F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings). Then, the SetupUtility must be run once again for you to input the appropriate operating environmentsettings. (The processing speed depends on the application software used, so this opera-tion may not cause the processing speed to increase.)If you install resident software after purchasing this computer, disable the resident soft-ware.When Indexing Service is enabled, Windows operation becomes slower.Disable Indexing Service in the following menu.[start] - [Search] - [Change preferences] - [Without Indexing Service]You can set the date and time using the following menu.[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time] When the computer is connected to a LAN, confirm the date and time of the server.If you continue to experience problems, the internal battery maintaining the clock mayneed to be replaced. Contact Panasonic Technical Support. This computer will not correctly recognize the date and time starting from the year 2100 A.D. Even when a password has been set in the Setup Utility, [Enter Password] does not appearwhen the computer resumes from the standby or hibernation mode.If you want to use the security function when using the standby or hibernation mode, use theWindows password as follows:1 Select [start] - [Control Panel] - [User Accounts], and select the account for which thepassword will be set.2 Select [Create a password], input the password, and then select [Create Password].3Add the check mark for [Prompt for password when computer resumes from standby]in [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].If you have created a password reset disk ( page 16), a message is displayed when youfail to correctly enter the password. Follow the message’s instructions and set the pass-word again by using the password reset disk.If you have not created a password reset disk, after reinstalling, setup Windows and thenset the password again.This means a floppy disk that does not contain system startup information has been left inthe floppy disk drive. Remove the floppy disk, and press any key.This message may appear when certain USB devices are connected. Remove the USB de-vice, or set [Legacy USB Support] in [Advanced] menu of the Setup Utility to [Disable].If the message still appears even after trying the above two measures, this may be anindication that some type of hard disk failure has occurred. Contact Panasonic TechnicalSupport.When Windows is shut down during the Battery Recalibration procedure, if you select[Cancel] in the [End Program] screen, Windows shutdown is aborted. In this case, BatteryRecalibration will begin the next time the computer is started. To start up Windows, turnoff the computer by sliding the power switch, and then turn it back on again.When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to berelated to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact PanasonicTechnical Support ( page 46). You can use the PC Information Viewer to check the computer’s usage status. ( “Dealing with Problems (Advanced)”) Starting Up
31TroubleshootingNo display after powering onThe power has not beenturned off, but after a cer-tain period of time, there isno displayWhen the battery pack isused, the screen is darkerthan when the AC adaptoris connectedThe LCD brightnesschanges a number of timeswhen the AC adaptor is dis-connectedImage colors are not repro-duced as expected when dis-playing photographs orother imagesWhen there is no display to an external display,• Check your cable connection to the external display.• Confirm your display is powered on.• Check the settings for your external display.The display destination may be set to the external display.Try changing the display destination by pressing Fn + F3 .If you want to switch the display destination repeatedly by pressing Fn + F3 , makesure that the display destination has switched completely each time before pressing Fn + F3 again.Press Fn + F2 and adjust the LCD brightness.Has the computer been set to the power-saving mode? To resume operation of your computer from the condition the power of the display is off(for energy conservation purposes), press any key unrelated to the direct triggering of aselection, like Ctrl .To save power, your computer may have automatically entered the standby mode (powerindicator blinks green) or hibernation mode (power indicator turns off). In such cases,slide the power switch.Press Fn + F2 and adjust the LCD brightness. Note, however, that when the LCDbrightness is increased, the battery running time will become shorter.The LCD brightness can be set to separate levels for when the AC adaptor is connectedand when it is disconnected.Intel(R) Display Power Saving Technology ( “Computing on the Road”) isactive and automatically changes the LCD brightness.We recommend removing the check mark from [Intel(R) Display Power Saving Technology].( “Computing on the Road”) DisplayPress F9 in the Setup Utility ( “Setup Utility”). This will restore the SetupUtility’s settings to their default values (except the password settings).Try removing all peripheral devices.Check a disk error using the following procedure.1Select [start] - [My Computer], right-click [Local Disk(C:)] and then select [Properties].2Select [Tools] - [Check Now].3Select [Start] after selecting required items in [Check disk options].At startup, hold down F8 when the [Panasonic] boot screen disappears*1, and releaseyour finger when the Windows Advanced Options Menu is displayed. Start the computerin Safe Mode, and confirm the details of the error.*1When [Password on boot] is set to [Enable], [Enter Password] appears after the [Panasonic] bootscreen disappears. Hold down F8 soon after inputting the password and pressing Enter . Starting Up (continued)When the previous item isnot the causeOn the [Enter Password]screen, a beep sounds and thepassword cannot be enteredEven after entering the pass-word, [Type your password]is displayed again Entering PasswordThe computer may be in ten-key mode.If the NumLk indicator lights, press NumLk to disable the ten-key mode, and theninput.The computer may be in ten-key mode.If the NumLk indicator lights, press NumLk to disable the ten-key mode, and theninput.The computer may be in Caps Lock mode.If the Caps Lock indicator lights, press Caps Lock to disable the Caps Lock mode,and then input.
32TroubleshootingDealing with Problems (Summary)The red indicator lightsThe red indicator blinksThe green indicator blinksThe battery indicator blinksgreen and orange alternatelyThe battery level is very low (the charge is approx. 9% or less).Connect the AC adaptor. You can use the computer when the battery indicator light isorange. If you do not have an AC adaptor, save your data and power off your computer.After replacing the battery pack with a fully charged one, turn your computer on.Quickly save your data and power off your computer. Remove the battery pack and dis-connect the AC adaptor, then connect them again.If the problem persists, contact Panasonic Technical Support. The battery pack or charg-ing circuit may be defective.In high temperature mode, the battery is discharging to the level that corresponds to an80%*1 charge for normal temperature mode ( “Battery Power”). Do not re-move the battery pack while the battery indicator is blinking green. If you remove it, thepower will be turned off forcibly.*1 In high temperature mode, the level that corresponds to an 80% charge for normal temperaturemode is displayed as [100%].Warming up the system to prevent hard disk drive malfunctions at low temperature. Leaveyour computer as is. Once the allowable temperature range requirement is satisfied, yourcomputer will start automatically. Battery IndicatorWindows cannot be shutdown or restarted Shutting downIf a USB device is connected, try removing it.It may take one or two minutes to shut down. Display (continued)An afterimage appears (e.g.,green, red, and blue dots re-main on the display) orthere are dots not display-ing the correct colorsThe screen becomes disor-deredThe external display nolonger displays properlyWhen you want to display thefonts or icons at a larger sizeDuring simultaneous dis-play, one of the screens be-comes disorderedWhen a video such as anMPEG file is being playedwith Windows® MediaPlayer, the display destina-tion cannot be switched us-ing Fn + F3If an image is displayed for a prolonged period of time, an afterimage may appear. This isnot a malfunction. The afterimage will disappear when a different screen is displayed.High-precision and advanced technologies are necessary in the production of color liquidcrystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements eitherfail to light or remain constantly lit (that is, more than 99.998% of elements are function-ing properly), no defect is considered to exist.The screen display may become distorted if the resolution or number of colors is changed,or if an external display is connected or disconnected while the computer is operating.Restart the computer.When an external display not compatible with the power saving mode is used with thecomputer, the display may not function correctly when the computer enters the powersaving mode. In such cases, turn off the power to the external display.Change the size of the icons, etc. using “Icon Enlarger” ( “Icon Enlarger”).To enlarge a part of the screen, use Loupe Utility ( “Loupe Utility”).Try changing the display by pressing Fn + F3 .If you continue to experience problems, try changing the display destination in the follow-ing menu.[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile]- [Devices]When the [Command Prompt] is set to “Full Screen” by pressing Alt + Enter , thepicture is displayed on one of the screens only. When the window display is restored bypressing Alt + Enter , the picture is displayed on both screens.Simultaneous display cannot be used until Windows startup is complete (during SetupUtility, etc.). When Fn + F3 is pressed, the screen is displayed on the externaldisplay or internal LCD.The display destination cannot be switched while a video such as an MPEG file is playing.Stop playing the video before switching the display destination.
33TroubleshootingThe display is not rotatedautomatically by switchingfrom Laptop mode to Tab-let mode, or vice versaThe display fails to rotateeven when the rotation but-ton is pressedWhen the screensaver startswhile the display is rotated,nothing is displayed on thescreen Display RotationConfirm that the default angle of each mode is correctly set. ( “Display Rotation”)Do not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in theprocess of switching users with the Fast User Switching function.Close the applications which are open.Some screensaver types do not display anything on the screen for the first minute or so.Try changing the screensaver type. Touch Pad / DigitizerIf you are using an external mouse, ensure that the external mouse has been connectedcorrectly.Restart the computer by using the keyboard (Press , U , and select [Restart] with R ).If the computer does not respond to keyboard commands, read “No response”( page 34).Has the Setup Utility been used to set [Touch Pad] to [Enable]?When external mouse drivers are installed (e.g., IntelliMouse), the touch pad may not beused.Has the touch pad driver been properly installed?Has the Setup Utility been used to set [Digitizer] to [Enable]?You can use only the pen included with the computer to use the digitizer function.It is necessary to perform [Calibration] to point correctly with the pen included with thecomputer.The cursor cannot be con-trolled properlyUnable to input using thetouch padUnable to use the digitizerfunctionIs Adobe Reader installed?If you have uninstalled Adobe Reader, install using the following procedures.1Select [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then select [OK].Install Adobe Reader by following the instructions on the screen. Reference ManualThe Reference Manual isnot displayedThe orange indicator blinks Battery cannot be recharged temporarily because the internal temperature of the batterypack is outside of the acceptable temperature range for recharging. Once the allowablerange requirement is satisfied, charging begins automatically. Your computer can be usednormally in this state. Battery Indicator (continued)Cannot log on with the SDMemory CardWindows logon user name and password are not set in the SD Memory Card correctly.Enter the Windows user name and password without using the SD Memory Card.After logging on, set the same user name and the password on the SD Memory Card andWindows, using the following operation.• Change the setting of the SD Memory Card by [SD Card Setup]. ( “SD MemoryCard Security Function”) SD Memory Card
34TroubleshootingDealing with Problems (Summary)Press Ctrl + Shift + Esc to open Task Manager and close the software applicationwhich is not responding.Is there an input screen hidden behind another window? Use Alt + Tab to check forother windows being displayed.After shutting down by sliding the power switch for more than four seconds, slide thepower switch to power on and open the application again.If the program no longer works normally, delete the program using the following menu.Then reinstall the program.[start] - [Control Panel] - [Add or Remove Programs] OthersNo responseSome applications may notwork properlyWhen switching to a different user with the Fast User Switching function, the followingproblems may occur.• Some applications may not work properly.•Key combinations with Fn may not work.• It may not be possible to set the settings of the display.• <Only for models with wireless LAN>Wireless LAN may not work.In this case, log off all users without using Fast User Switching function, and try theoperation once more. If the problem persists, restart the computer. Fast User Switching Function
35Troubleshooting9Make a selection from the menu.When selecting [2], enter the basic partition size forthe operating system installation and press Enter .(The data partition size is the remainder after subtract-ing the basic partition size.)To select [3], the initial partition size must be 8 GB ormore of the hard disk size. Reinstallation cannot be per-formed with a small partition size.<When the hard disk backup function has been enabled>If you select [1] or [2], the message [The Backup functionhas been enabled. If [Recovery] is executed, the Backupfunction will be disabled, and your Backup data will belost.] appears. In this case, press Y .If the message [Computer must be rebooted in order toexecute [Recovery].] appears, press R .When [2] is selected, the hard disk backup func-tion cannot be enabled because the hard disk hasbeen divided into partitions.NOTEReinstalling SoftwareBefore ReinstallationPreparingProduct Recovery CD-ROM (included)Panasonic USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)ImportantBefore the reinstallation procedure, remove all peripherals (except for the CD/DVD drive).Be sure the AC adaptor is connected until the reinstallation procedure is completed.Reinstalling1Turn off the computer and connect the CD/DVD drive tothe USB port.2Turn the computer on, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.3Write down all of the contents of the Setup Utility andthen press F9 .At the confirmation message, select [Yes] and press Enter .4Select [Boot] menu, then select [USB CDD] and press F6until [USB CDD] is at the top of the [Boot] menu.5Place disc number one of the recovery CDs into the CD/DVD drive.6Press F10 .At the confirmation message, select [Yes] and pressEnter .The computer will restart, and this screen should appear.When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data onyour hard disk to another media or to an external hard disk before running the reinstallation procedure.The reinstallation procedure will return the computer to its original condition.Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost.(This is not the case when Windows is reinstalled in the first partition.)• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure.8Press 1 to select [1. Yes, I agree to the provisions aboveand wish to continue!].This screen should appear.---------------------------------------------------------------------Select a number---------------------------------------------------------------------Reinstalling : Windows(R) XP Tablet PC Edition1. Reinstall Windows to the whole HDD to factory default.2. Make two partitions, for the operating system and data. And reinstallWindows to the operating system partition.(All existing partitions on HDD will be lost.)3. Reinstall Windows to the first partition.0. Cancel---------------------------------------------------------------------<When the hard disk backup function has been enabled>When the message [The Backup function has been en-abled. If [Recovery] or [Erase HDD] is executed, theBackup function will be disabled, and your Backup datawill be lost.] appears, press Y .7Press 1 to execute [1.[Recovery]].(You can cancel this operation by pressing 0 .)The License Agreement screen should appear.---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.2. [ Erase HDD ] Erase the whole data on HDD for security.3. [ Backup ] Enable the Backup function.0. [ Cancel ] Cancel.---------------------------------------------------------------------
36TroubleshootingDo not interrupt the reinstallation procedure be-fore completion, for example by turning off thecomputer or pressing Ctrl + Alt + Del , asthis may prevent Windows from starting up, or maycause data to be lost so that the reinstallation pro-cedure cannot be executed.When a message appears instructing you to insertthe next CD, insert the recovery CD showing thenext number in the sequence, and then select [OK].If the message [The media does not contain thecorrect file] appears, select [OK]. A message willappear instructing you to insert the next CD.Confirm that the proper recovery CD has been in-serted by opening the cover of the CD/DVD driveand then close the cover, then select [OK].CAUTION10At the confirmation message, press Y .The operation of reinstallation for the hard disk starts au-tomatically. (The operations take about 30 minutes.)17Perform the first-time use operation ( page 14 step 6- page 15 step 8 ).18Run the Setup Utility and change the settings wherenecessary.If additional instructions are included with the com-puter, be sure to read them. It may be necessary toperform additional operations during the follow-ing procedures.NOTEAfter the reinstallation procedure completes, this screenshould appear.----------------------------------------------------------------[Recovery] is complete.Windows(R) XP Tablet PC Edition install wizard will start after reboot.Please remove the Product Recovery CD-ROM.After tuning off the power, disconnect the CD/DVD-ROM drive, and turn thepower on again.----------------------------------------------------------------12Remove the CD/DVD drive.13Turn on the computer, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.14Press F9 .At the confirmation message, select [Yes] and press Enter . (The Setup Utility settings will return to theirdefault values. Even the security settings with the excep-tion of the password(s) will return to their default val-ues.)15Select [Exit] and then select [Save Current Values], thenpress Enter .At the confirmation message, select [Yes] and press Enter .16Turn the computer off by sliding the power switch.Reinstalling Software11Remove the recovery CD, and then press any key.The computer will be shut down.
37AppendixAppendixYOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACETHE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, INWHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminatethis license at any time by destroying, at your expense, the Programs and related documentation together with all copiesthereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor setforth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any suchtermination, you agree to destroy, at your expense, the Programs and related documentation together with all copiesthereof in any form.A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs inaccordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving onlya LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, owner-ship nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts,designs and ideas represented by or incorporated in the Programs and related documentation, all of which title,ownership and rights shall remain with MEI or its suppliers.B. You may use the Programs only on the single Product which was accompanied by the Programs.C. You and your employees and agents are required to protect the confidentiality of the Programs. You may notdistribute or otherwise make the Programs or related documentation available to any third party, by time-sharingor otherwise, without the prior written consent of MEI.D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation forany purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of youruse of the Programs on the single Product which was accompanied by the Programs. You shall not modify, orattempt to modify, the Programs.E. You may transfer the Programs and license them to another party only in connection with your transfer of thesingle Product which was accompanied by the Programs to such other party. At the time of such a transfer, youmust also transfer all copies, whether in printed or machine readable form, of every Program, and the relateddocumentation, to the same party or destroy any such copies not so transferred.F. You may not remove any copyright, trademark or other notice or product identification from the Programs and youmust reproduce and include any such notice or product identification on any copy of any Program.LICENSETERMYOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUNDBY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTEROF THIS AGREEMENT.THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT ("PRODUCT")ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITHTHE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMEDTO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.Matsushita Electric Industrial Co., Ltd. ("MEI") has developed or otherwise obtained the Programs and hereby licensestheir use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) toachieve your intended results, and for the installation, use and results obtained therefrom.LIMITED USE LICENSE AGREEMENTAbout Intel® software productsThe enclosed software products and documentation were developed at private expense, and are provided with “RESTRICTEDRIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 andDFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment ofIntel's proprietary rights in the product.
38AppendixA. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs d'utiliser lesLogiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir qu'undroit limité d'utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n'obtenir aucundroit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant ni vis-à-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou incorporés dans les Logicielset la documentation les accompagnant, dont les titres, propriété et droits resteront tous à MEI ou à leurspropriétaires.B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.C. Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez nidistribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d'un tiers, par partage detemps ou de quelque autre manière que ce soit, sans l'autorisation écrite préalable de MEI.D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documenta-tion les accompagnant pour quelque fin que ce soit, à l'exception d'une (1) copie des Logiciels à des fins desauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagnépar les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu'en rapport avec votre cessiondu Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vousdevez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous lesLogiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.F. Vous ne pouvez retirer aucune marque de droits d'auteur, marque ou autre ni aucune identification de produit desLogiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copiesdes Logiciels.Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurscopies, de façon électronique ou mécanique, en tout ou en partie.Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie, àl'exception de ce qui est expressément stipulé dans ce contrat.Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l'exception de ce qui est autorisé auparagraphe E ci-dessus, votre licence est automatiquement résiliée.LicenceTermes, clauses et conditionsCette licence n'est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d'une résiliationantérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentationles accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée, avecapplication immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vous nerespectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez dedétruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque formeque ce soit.Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,clauses et conditions. Vous reconnaissez en outre qu'ils sont la description complète et exclusive du contrat conclu entrenous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre communicationentre nous, relativement à l'objet du présent contrat.Le(s) logiciel(s) (les "Logiciels") fournis avec ce produit Panasonic® (le "Produit") sont exclusivement concédés enlicence à l'utilisateur ultime ("vous"), et ils ne peuvent être utilisés que conformément aux clauses contractuelles ci-dessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditionsdes présentes.Matsushita Electric Industrial Co., Ltd. ("MEI") a mis au point ou obtenu les Logiciels et vous en concède l'utilisation parles présentes. Vous assumez l'entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pourobtenir les résultats escomptés, ainsi que de l'installation, de l'utilisation et des résultats obtenus.Contrat de licence d'usage limité
39AppendixAppendixHard Disk Backup FunctionThe hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard diskcontents or restore backed up contents to their original locations.By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from operationalerrors or other factors. Also, you can back up or restore hard disk contents using this computer alone, without having to use othermedia or peripheral devices.At the time of purchase, the hard disk backup function is disabled. If you follow the procedure below to create a backup area, thehard disk backup function will be enabled, and you will be able to back up your data. Note, that once the backup function has beenenabled, you will have to perform the reinstallation procedure to disable it again ( page 35).Disconnect or remove all peripheral devices (except for the CD/DVD drive) and SD MemoryCards, as the backup area may not be created properly while these devices are connected.Be sure the AC adaptor is connected to the computer.A backup area cannot be created if the hard disk is already divided into several partitions. Returnthe computer to its condition at the time of purchase (one partition only), and create the backuparea.To divide the partition, make the selection when the backup area is created ( page 40 step 8).If the partition configuration is changed (partitions created, size changed, etc.) after the backuparea has been created, it will no longer be possible to execute the backup function. To change theconfiguration, it is necessary to return the computer to its condition at the time of purchase, andthen create the backup area again.The hard disk backup function will only work for the internal hard disk. This function does notwork with an external hard disk.Backup and restore functions will not operate if the hard disk has been damaged.Do not use the NTFS file system compression function, as this may result in insufficient capacityof the backup area.If the hard disk malfunctions, it will be impossible to read the data stored on it. We recommendthat you also back up important data to a location other than the hard disk (an external hard diskor other media).Execute a disk error check using the following procedure.1Select [start] - [My Computer], right-click [Local Disk(C:)] and select [Properties].2Select [Check Now] from [Tools].3In [Check Disk], select [Start] without adding a check mark beside any of the items.If a message is displayed indicating that there is an error in the disk, display [Check Disk], andadd a check mark for [Automatically fix file system errors] and [Scan for and attempt recoveryof bad sectors], select [Start], and check for disk errors again.The hard disk backup function does not accommodate dynamic disks. Do not convert the harddisk to a dynamic disk.The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when the data isbacked up or restored. Note that if an error occurs while data is being restored, whether as a result of an unexpected malfunction,incorrect operation, or other reason, the data in the hard disk (data before restoration) may be lost.Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss of data)as a result of the use of this function.Before Using a Hard Disk Backup FunctionPreparingProduct Recovery CD-ROM (included)Panasonic USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)
40AppendixHard Disk Backup Function1Turn off the computer and connect the CD/DVD drive to the USB port.2Turn on the computer, and press F2 while [Panasonic] boot screen is displayed.The Setup Utility will start up.If a password has been set, enter the Supervisor Password. You cannot register [Boot] menuwith a User Password.3Select [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at the top ofthe [Boot] menu.4Place disc number one of the recovery CDs into the CD/DVD drive.5Press F10 .At the confirmation message, select [Yes] and press Enter .The computer will restart. If [Enter Password] is displayed during the following procedures,input the Supervisor Password or the User Password.This screen should appear.6Press 3 to execute [3.[Backup]].Regarding backup area• Requires availability of at least half of the entire hard disk. Without sufficient spaceavailable, the backup area cannot be created.• When the backup area is created, the usable hard disk capacity will be reduced to lessthan half.• The backup area cannot be accessed from Windows. For this reason, backed up datacannot be copied to CD-R or other removable disk media.• When the hard disk backup function is executed, data in the backup area will be over-written. If newly created or edited data is backed up later, data stored previouslyin the backup area will be lost.NOTECreate a Backup AreaWhen dividing the hard disk into partitionsDo not execute [1. [Recovery]] to divide the hard disk into partitions. The hard diskbackup function cannot be enabled after the hard disk has been partitioned. Use proce-dure 8 to divide the hard disk.CAUTIONThe usable hard disk area[At the time of purchase] [After the backup area is created]The backup areaCannot be accessedfrom Windows.Can be accessed fromWindows (One partition).7At the confirmation message, press Y .8Select how to divide the hard disk from the menu.<To create a backup area and enable the backup function without dividing the hard disk> Select [1].---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.2. [ Erase HDD ] Erase the whole data on HDD for security.3. [ Backup ] Enable the Backup function.0. [ Cancel ] Cancel.---------------------------------------------------------------------
41AppendixAppendix9At the confirmation message, press Y .The backup area is then created.10When the message [You must reboot in order to enable the Backup function] appears, removethe recovery CD, and press any key to restart the computer. The computer is restarted, then thebackup process will begin.11 When the message [[Backup] is complete] appears, press Ctrl + Alt + Del to restartthe computer.Do not press Ctrl + Alt + Del until the message is displayed.CAUTIONThe [Boot] menu in the Setup Utility is set to start up from the CD/DVD drive. Change thissetting if necessary.The next time the backup or restore functions are executed, follow the procedure for “BackingUp and Restoring Data” ( below).NOTE1Turn the computer on, and press F2 while [Panasonic] boot screen is displayed.The Setup Utility will start up.If a password has been set, enter the Supervisor Password or the User Password.2Select [Exit] menu, then select [Hard Disk Backup / Restore] and press Enter .At the confirmation message, select [Yes] and press Enter .Backing Up and Restoring DataBefore executing the backup function, execute a disk error check. ( page 39)Do not interrupt the backup or restore functions before completion, for example by turningoff the power or pressing Ctrl + Alt + Del , as this may prevent Windows fromstarting up, or may cause data to be lost so that the backup and restore functions cannot beexecuted.CAUTION12After logging on to Windows, a message will appear advising that a new device has been in-stalled and that the computer must be restarted to enable the settings. Select [Yes] to restart thecomputer.<To create a backup area and divide hard disk into two partitions, for OS and data>Select [2], enter the partition size (GB), and press Enter .• You can cancel this operation by pressing 0 .• The data partition size will be the maximum settable size less the number entered above.The maximum settable size will differ depending on models.The usable hard disk area[At the time of purchase] [After the backup area is created]The backup areaCannot be accessedfrom Windows.Can be accessed fromWindows (Two partitions).
42AppendixTo disable the hard disk backup functionPerform the reinstallation procedure. All data in the backup area and the hard disk will be erased.Conduct steps 1-8 for “Reinstalling Software” ( page 35). Select [1] or [2] to execute thereinstallation at the screen for executing the reinstallation.• When [1] is selected, the hard disk backup function will be disabled.• When [2] is selected, the hard disk backup function will be disabled, but in this case, becausethe hard disk has been divided into partitions, the hard disk backup function cannot bere-enabled ( page 28).• When [3] is selected, the hard disk backup function cannot be disabled.CAUTIONWhen the hard disk backup function has been enabled, the backed up data will not be erasedeven if a commercial data erasing utility or similar software is used to erase all data from user-accessible area. To erase all data on the hard disk, including backed up data, use a commercialdata erasing utility after disabling the hard disk backup function following the procedure be-low, or use the hard disk data erase utility included in this computer ( page 43).Occasionally, the message [#1805 cannot write image file] will be displayed, and the backupfunction will be interrupted. If this error occurs, execute the backup function again. Afterthis, if the backup function is completed properly, then there is no problem in the hard disk.4When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press Ctrl +++++ Alt +++++ Del to restart the computer.• If the backup or restore process was interrupted before completion, for example if the powerwas turned off, execute the process again.• After logging on to Windows, when a new device is installed and a message appears advisingthat the computer must be restarted to enable the settings, select [Yes] to restart the computer.3Select the operation to be executed from the menu.<To back up hard disk contents to the backup area>1 Press 1 to execute [1. [Backup]].(When dividing the hard disk into two partitions, select the backup method at next screen.)2At the confirmation message, press Y .The backup process will begin.<To restore backed up contents to the hard disk>1 Press 2 to execute [2. [Restore]].(When data is backed up in two partitions, select the restore method at next screen.)2At the confirmation message, press Y .The restore process will begin.The time required to complete the backup or restore process differs depending on thedata volume.NOTEHard Disk Backup Function
43AppendixAppendixHard Disk Data Erase Utility1Turn off the computer and connect the CD/DVD drive to theUSB port.2Turn the computer on, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Password.3Select [Boot] menu, then select [USB CDD] and press F6until [USB CDD] is at the top of the [Boot] menu.4Place disc number one of the recovery CDs into the CD/DVD drive.5Press F10 . At the confirmation message, select [Yes]and press Enter .The computer will restart, and this screen should appear.This computer is equipped with a utility for erasing hard disk data.When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard diskdata by following the steps below.The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions orother operational errors, data may not be completely erased. There are also specialized devices that may be able to read data thathas been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company thatspecializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered asa result of the use of this utility.NOTEBe sure the AC adaptor is connected until the procedure is completed.This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks.This utility cannot erase data from damaged disk.This utility cannot erase data for specific partitions.After executing this utility, the computer cannot be booted from the hard disk.The backup area and the data in the backup area will be erased.Product Recovery CD-ROM (included)Panasonic USB CD/DVD drive (optional: USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)6Press 2 to execute [2. [Erase HDD]].(You can cancel this operation by pressing 0 .)<When the hard disk backup function has been enabled>When the message [The Backup function has been enabled.If [Erase HDD] is executed, the Backup function will bedisabled, and your Backup data will be lost.] appears, press Y .When the message [Computer must be rebooted in order toexecute [Erase HDD].] appears, press R .7At the confirmation message, press Y .8When [<<<Start Menu>>>] is displayed, press Enter .9The approximate time required for erasing data will be dis-played.Press Space .10At the confirmation message, press Enter .The operation of erasing the hard disk will start.(If necessary, the “hard disk data erase” operation can becancelled after it has begun by pressing Ctrl + C .If the operation is cancelled before being completed, a partof the data will not be erased.)11After the operation is complete:Under normal conditions, the message [Hard disk data hasbeen deleted.] will be displayed.If a problem occurred during the operation, an error messagewill be displayed.12Remove the recovery CD, and then press any key to turn offthe computer.13Remove the CD/DVD drive.PreparingProcedure<When the hard disk backup function has been enabled>When the message [The Backup function has been enabled.If [Recovery] or [Erase HDD] is executed, the Backup func-tion will be disabled, and your Backup data will be lost.]appears, press Y .---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.2. [ Erase HDD ] Erase the whole data on HDD for security.3. [ Backup ] Enable the Backup function.0. [ Cancel ] Cancel.---------------------------------------------------------------------
44AppendixSpecificationsCF-18KDHZXVM CF-18KDHZBVMIntel® Pentium® M Processor 753 (1.2 GHz, 2 MB*1 L2 cache, 400 MHz FSB)512 MB*1 (1536 MB*1 Max.)UMA (128 MB*1 Max.)*210.4 type (TFT)65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots)65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots/1280 x 1024 dots)*460 GB*5Windows keyboard (82 keys)Touch PadDigitizer (Anti-Reflection)Two Type I or Type II, or one Type III3.3 V: 400 mA, 5 V: 400 mA200-pin, 1.8 V, SO-DIMM, DDR2-SDRAM, PC2-3200 CompliantSD Memory CardMiniature jack, 3.5 DIAMiniature jack, 3.5 DIA4-pin x 2, USB2.0RJ-11 Data: 56 kbps (V.92 & K56flex*9) FAX: 14.4 kbpsRJ 45 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TXBuilt-in Intel® PRO/Wireless 2915 ABG ( page 45)Built-in ( page 45)Dedicated 100-pin femaleMini Dsub 15-pin femaleDedicated 50 Ω coaxial connector x 2WAVE and MIDI playback, Monaural Speaker (built in)Li-ion 7.4 V, 7.65 AhApprox. 4.5 hours - 8.5 hours*11 (Approx. 6.5 hours*12)Approx. 7 hoursApprox. 4 hoursCoin type lithium battery 3.0 VInput: 100 V - 240 V AC, 50 Hz / 60 Hz Output: 16.0 V DC, 2.5 AApprox. 26 W*15 / Approx. 40 W (maximum when recharging in the ON state)5 °C to 35 °C {41 °F to 95 °F}30% to 80% RH (No condensation)-20 °C to 60 °C {-4 °F to 140 °F}30% to 90% RH (No condensation)271 mm X 49 mm X 216 mm {10.7 " X 1.93 " X 8.5 "}Approx. 2.1 kg {Approx. 4.5 lb.}Model No.CPUMemoryVideo MemoryLCD TypeDisplayed Colors*3External DisplayHard Disk DriveKeyboardPointing DevicePC Card SlotAllowable current (total for two slots)RAM Module Slot*6SD Memory Card Slot*7Microphone Jack*8Interface Headphone JackUSB PortModemLANWireless LANBluetooth®Expansion Bus ConnectorExternal Display PortExternal Antenna ConnectorSoundBattery PackOperating Time*10Charging Time*10 Power OnPower OffClock BatteryAC Adaptor*13Power Consumption*14EnvironmentOperation TemperatureHumidityStorage TemperatureHumidityPhysical Dimensions*16 (W X H X D)Weight*16Main SpecificationsThis page provides the specifications for the basic model CF-18KDHZXVM/CF-18KDHZBVM. The model number will changedepending on the configuration of the unit, such as, CPU speed, memory size, HDD size, Operating System, LCD type, and whethera wireless LAN or Bluetooth® is built in or not.To check the model number:Check the bottom of the computer or the box the computer came in at the time of purchase.To check CPU speed, memory size and the hard disk drive (HDD) size:Run the Setup Utility ( “Setup Utility”).Confirm the required information by checking the following items.• [Information] menuCPU speed: [CPU Speed] Memory size: [System Memory] Hard disk drive size: [Primary Master]• [Advanced] menuWireless LAN: [Wireless LAN] is displayed only if a wireless LAN is built in.
45AppendixAppendixMicrosoft® Windows® XP Tablet PC Edition 2005SoftwareOperating SystemUtility ProgramsData transfer rates*17Standards supportedTransmission methodWireless channels usedRF frequency bandIEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)IEEE802.11a/IEEE802.11b/IEEE802.11gOFDM system, DS-SS systemIEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165IEEE802.11b/IEEE802.11g: Channels 1 to 11IEEE802.11a: 5.18~5.32 GHz, 5.745~5.825 GHzIEEE802.11b/IEEE802.11g: 2412~2462 MHzWireless LAN (only for models with wireless LAN)*11 MB = 1,048,576 bytes*2A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video Memory cannotbe set by the user.*3A 16,777,216 color display is achieved by using the dithering function.*4Maximum resolution depends on the specifications of the external display.*51GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.*6A PC2-3200-compliant or PC2-4200-compliant RAM module can be added. A PC2-4200-compliant RAM module added to this computer,operates at the same speed as a PC2-3200-compliant RAM module.*7This slot does not support the MultiMedia card.Operation has been confirmed for Panasonic SD Memory Cards with up to 1 GB capacity.*8Use only a monaural condenser microphone.*9The settings for the K56flex modem need to be changed according to the AT command.*10 Varies depending on the usage conditions, CPU speed, etc.*11 Measured using BatteryMarkTM Version 4.0.1 (LCD brightness: Maximum - Minimum)*12 Measured using MobileMarkTM 2002 (LCD brightness: 60 cd/m2)*13 <Only for North America>The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compatible AC cord.*14 Approx. 1.0 W when the battery pack is fully charged (or not being charged) and the computer is off.Approx. 1.5 W when the Wake up from LAN function has been enabled.*15 Rated power consumption.*16 The dimensions and weight do not include the hand strap.*17 These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.*18 Only for models with wireless LAN.*19 The Product Recovery CD-ROM is required.*20 Only for models with wireless LAN and/or Bluetooth.*21 Only for models with Bluetooth.Setup UtilityDMI ViewerMicrosoft® Windows® Media Player 10Adobe ReaderIntel® PROSet/Wireless Software*18Display Rotation ToolPC Information ViewerHard Disk Backup Utility*19Hard Disk Data Erase Utility*19SD UtilityIcon EnlargerLoupe UtilityHotkey SettingsBattery Recalibration UtilityWireless LAN Switch*18Wireless Switch Utility*20Bluetooth Switch*211.2FHSS systemChannels 1 to 792.402-2.48 GHzBluetooth®Bluetooth VersionTransmission MethodWireless Channels UsedRF Frequency Band
46AppendixLIMITED WARRANTYPANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separatewarranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect inmaterials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which arecovered for a period of one (1) year from the date of purchase.This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required beforewarranty performance is rendered.This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occursin shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introductionof liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification orservice by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.Limits and Exclusions:There are no other express warranties except as listed below.PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THEUSE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDINGTHE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTYPERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on howlong an implied warranty lasts, so the above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your productdevelops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to yoursatisfaction, then write to the Consumer Affairs Division at the address indicated below.SOFTWARE LIMITED WARRANTYPanasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs arefurnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereofto you, as evidenced by your purchase receipt.This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet yourrequirements or that the operation of the Programs will be uninterrupted or error free.Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defectivedisk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaidwarranty period.Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on whichthe Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other mediaotherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse,neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that isattributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, orattempted to modify any Program.DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEG-LIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OFUSE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIP-MENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, sothe above limitations or exclusions may not apply to you.This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.* * *To obtain service or technical assistance within the continental U.S.A. and Alaska.DIAL TOLL FREE: 1-800-LAPTOP5Correspondence requesting product information should be sent to:Panasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094For U.S.A.
47AppendixAppendixPANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), whenpurchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the termsset forth below, during the period of warranty coverage specified.Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the nature of the defectclaimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtainservice. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered bythis Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair issubject to the terms of this Limited Warranty for the balance of the original period of warranty coverage.No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defectsin a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreignmatter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICECarefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liabilityis assumed for loss or damage to the product while in transit, if you chose your own transportation carrier.SOFTWARE MEDIA LIMITED WARRANTYCoverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s)is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receiptas evidenced by your purchase receipt for your Panasonic Computer product.THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer tothe software licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it,transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, togetherwith a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. Itdoes not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or otherclaims, whether or not of similar character.No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attemptedmodification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data orremovable storage media.GENERALNO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE,SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THECOMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THECOMPUTER PRODUCT.NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTIONAROSE.Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.Scope of CoverageWhole Product (except Batteries), AC adaptor and CD-ROM(if factory installed)Batteries, CD-ROM (unless factory installed), Port Replicator,Extra Memory Modules and all other Peripherals, Options andAccessoriesPeriod of CoverageThree (3) Years from Date of OriginalEnd User Customer PurchaseOne (1) Year from Date of Original EndUser Customer PurchaseType of Failure CoverageDefective Materials or WorkmanshipDefective Materials or WorkmanshipFor Canada
Outline of the International ENERGY STAR® Office Equipment ProgramThe international ENERGY STAR® Office Equipment Program is an international programthat promotes energy saving through the use of computers and other office equipment.The program backs the development and dissemination of products with functions thateffectively reduce energy consumption. It is an open system in which business proprietorscan participate voluntarily. The targeted products are office equipment such as computers,displays, printers, facsimiles, and copiers. Their standards and logos are uniform amongparticipating nations.As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. hasdetermined that this product meets the ENERGY STAR® guidelines for energyefficiency.© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.Printed in JapanFJ0805-0DFQX5562ZAPanasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5,Secaucus, NJ 07094Panasonic Canada Inc.5770 Ambler Drive Mississauga,Ontario L4W 2T3

Navigation menu