Panasonic of North America 9TGCF-18A Personal Computer Model CF-18 Family User Manual Operating Instructions

Download:
Mirror Download [FCC.gov]
Document ID	910097
Application ID	Z8U+r0YBnN5HIcIBSVFmmw==
Document Description	User Manaul CF 18
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	278.33kB (3479110 bits)
Date Submitted	2008-03-05 00:00:00
Date Available	2008-06-01 00:00:00
Creation Date	2005-08-19 08:02:40
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-08-19 17:18:28
Document Title	Operating Instructions
Document Creator	PageMaker 6.0J
Document Author:	Matsushita Electric Industrial Co., Ltd.

OPERATING INSTRUCTIONS
Personal Computer
Model No.
CF-18 Series
Getting Started
Read Me First ................................................. 3
Names and Functions of Parts ........................ 9
First-time Operation ...................................... 13
Reference Manual
Tablet PC
• Read Me First
• Key Combinations
• LED Indicators
Getting Started
Contents
•
•
•
•
•
•
•
•
•
•
•
Reference Manual
Tablet Buttons
Touch Pad
Digitizer (Advanced)
Display Rotation
Standby/Hibernation
Functions
Security Measures
Computing on the Road
Battery Power
PC Cards
SD Memory Card
SD Memory Card
Security Function
•
•
•
•
•
•
•
•
•
•
•
•
•
RAM Module
Port Replicator
External Display
USB Devices
Modem
LAN
Wireless LAN
Bluetooth
Wireless Switch Utility
Hard Disk Drive
Setup Utility
Icon Enlarger
Loupe Utility
Troubleshooting
List of Error Codes ........................................ 29
Dealing with Problems (Summary) .................. 30
Reinstalling Software .................................... 35
Reference Manual
• Technical Information
• DMI Viewer
• List of Error Codes
This manual can be accessed on your computer. Refer to page 24 on how to access the Reference Manual.
Appendix
LIMITED USE LICENSE AGREEMENT ....... 37
Hard Disk Backup Function ............................. 39
Hard Disk Data Erase Utility .......................... 43
Specifications ................................................ 44
LIMITED WARRANTY ................................... 46
Please read these instructions carefully before using this product and save this manual for future use.
Appendix
[Additional Manual]
Reference Manual
• Dealing with Problems
(Advanced)
Troubleshooting
Starting Up/Shutting Down ............................ 17
Touch Pad (Basic Operation) ............................. 20
Digitizer (Basic Operation) ................................. 21
Operating in Tablet Mode .............................. 22
Reference Manual ......................................... 24
Useful Information ......................................... 25
Operation
Operation
Customer's Record
Model No.*
Dealer's Name
Serial No.
or
Code No.
Dealer's Address
Getting Started
Date of Purchase
* For the Model No., insert the 12 digit number (for example, CF-18KDHZXVM) located on
the bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new
computer.
Illustrations and Terminology in this Manual
NOTE:
CAUTION:
Enter :
Fn + F5 :
[start] - [Run]:
NOTE provides a useful fact or helpful information.
CAUTION indicates a condition that may result in minor or moderate injury.
This illustration means to press the [Enter] key.
This illustration means to press and hold the [Fn] key, then press the [F5] key.
This illustration means to click [start], then to click [Run]. For some applications, you may need to
double-click.
Where to go for referred information.
This illustration means to refer to the Reference Manual, which is available on your computer.
Refer to page 24 on how to access this manual.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation
easier to understand.
The “CD/DVD drive” is a description about drives, such as DVD-ROM, CD-ROM, CD-R/RW, and DVD-ROM & CDR/RW drives.
In this manual, descriptions are given using illustrations not featuring the hand strap for convenience of explanation.
If the user has logged on without administrator authority, some functions may not be executable, and some screens may not
be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.
Confirm the latest information on optional products in catalogs, etc.
In this manual, “Microsoft® Windows® XP Tablet PC Edition 2005” is indicated as “Windows” or “Windows XP”.
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be
reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no
liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft, Windows, the Windows logo and IntelliMouse are registered trademarks of Microsoft Corporation of the United States
and/or other countries.
Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation.
SD Logo is a trademark.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of the respective owner companies.
Read Me First
For U.S.A.
Warning
To assure continued compliance, use only shielded interface
cables when connecting to a computer or peripheral. Also, any
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment.
FCC RF Exposure Warning:
This equipment is provided with PC Card slot that could be
used with wireless transmitters, which will be specifically
recommended when they become available.
Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment has been approved for portable operation,
and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 1.5 cm spacing be provided between antenna(s) and all
person’s body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This equipment may use multiple installed transmitters, which
may be capable of simultaneous transmission.
This equipment is provided with external antenna connector(s)
for connection to optional Car Mounter or Port Replicator for
mobile external mounted antenna(s). External antenna(s) must
be professionally installed and cannot exceed recommended
maximum antenna gain as described in individual provided
supplement instructions for wireless transmitters. Also, user
must maintain minimum 20 cm spacing between external
antenna(s) and all person’s body (excluding extremities of
hands, wrist and feet) during wireless modes of operation.

This product is restricted to indoor use due to its operation in
the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the frequency
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and /or damage this product.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party: Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-527-8675)
FCC Regulation Notice for modem
This equipment contains a FCC approved modem.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
1. This equipment complies with CFR47 Part 68 rules. On the
computer is a label that contains, among other information,
the FCC registration number and ringer equivalence number
(REN) for this equipment. If required, this information must
be provided to the telephone company.
2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be
connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant.
See Installation Instructions for details.
3. The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs on the
telephone line may result in the devices not ringing in response
to an incoming call. In most, but not all area, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company.
4. If your telephone equipment cause harm to the telephone
network, the telephone company will notify you in advice
that temporary discontinuance of service may be required.
But if advice notice isn’t practical, the telephone company
will notify the customer as soon as possible. Also, you will
be advised of your right to file a complaint with the FCC if
you believe it is necessary.
5. The telephone company may take changes in its facilities,
equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
6. If trouble is experienced with this equipment, for repair or
warranty information, please contact Panasonic Corporation
of North America at DIAL TOLL FREE 1-800-LAPTOP5
(1-800-527-8675). If the equipment is causing harm to the
telephone network, the telephone company may request that
you disconnect the equipment until the problem is resolved.
7. There are no user serviceable parts contained in this equipment.
8. This equipment may not be used on coin service provided
by the telephone company. Connection to party lines is subject to state tariffs.
Getting Started
Federal Communications Commission Radio
Frequency Interference Statement
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Getting Started
Read Me First
9. The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification
of the business or other entry, or other individual sending the
message and the telephone number of the sending machine or
such business, other entity, or individual. In order to program
this information into your fax software, you should refer to
the manual of the Fax software being used.
10.According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC
outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment
connected to AC power sources and that this is a major nationwide problem.
“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.”
“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des
conducteurs de télécommunications 26 AWG ou de section supérieure.”
Notice for the products using LCD
This product uses one or more fluorescent lamps containing a
small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or
recycling information please contact your local authorities, or
the Electronics Industries Alliance: 
UL1604-conforming model. (The model which has description of “UL1604” in the bottom of the computer.)
• THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C AND D OR NON-HAZARDOUS LOCATIONS ONLY.
• WARNING – EXPLOSION HAZARD – SUBSTITUTION
OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2.
• When connecting and using a device manufactured by a third
party, enquire to the manufacturer as to whether the device
suits CLASS I, DIVISION 2.
For Canada
Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved modem unit.
The Industry Canada label is affixed on the modem unit.
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment meets
telecommunications network protective, operational and
safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). The
Department does not guarantee the equipment will operate
to the user’s satisfaction.
Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in
rural areas. Caution: Users should not attempt to make such
connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.”
“NOTICE: The Ringer Equivalence Number (REN) assigned
to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.”
REN: See bottom of the computer
RESTRICTIONS CONCERNANT LE RACCORDEMENT
DE MATÉRIEL
“AVIS: L’étiquette d’Industrie Canada identifie le matériel
homologué. Cette étiquette certifie que le matériel est
conforme aux normes de protection, d’exploitation et de
sécurité des réseaux de télécommunications, comme le
prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure
toutefois pas que le matériel fonctionnera à la satisfaction
de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il
est permis de le raccorder aux installations de l’entreprise
locale de télécommunication. Le matériel doit également être
installé en suivant une méthode acceptée de raccordement.
L’abonné ne doit pas oublier qu’il est possible que la
conformité aux conditions énoncées ci-dessus n’empêche pas
la dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être
coordonnées par un représentant désigné par le fournisseur.
L’entreprise de télécommunications peut demander à
l’utilisateur de débrancher un appareil à la suite de
réparations ou de modifications effectuées par l’utilisateur
ou à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que
tous les fils de mise à la terre de la source d’énergie
électrique, des lignes téléphoniques et des canalisations
d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette
précaution est particulièrement importante dans les régions
rurales. Avertissement: L’utilisateur ne doit pas tenter de
faire ces raccordements lui-même; il doit avoir recours à un
service d’inspection des installations électriques, ou à un
électricien, selon le cas.”
“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné
à chaque dispositif terminal indique le nombre maximal de
terminaux qui peuvent être raccordés à une interface. La
terminaison d’une interface téléphonique peut consister en
une combinaison de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie
de touts les dispositifs n’excède pas 5.”
IES: Voir sous le fond de l’ordinateur

This product (local network devices) for the band 5150-5250
MHz is only for indoor usage to reduce potential for harmful
interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users (meaning they
have priority) of 5250-5350 MHz and 5650-5850 MHz and these
radars could cause interference and/or damage to LELAN devices.
CSA C22 2 NO.213-conforming model. (The model
which has description of “CSA C22 2 NO.213” in the
bottom of the computer.)
• THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C AND D OR NON-HAZARDOUS LOCATIONS ONLY.
• WARNING – EXPLOSION HAZARD – SUBSTITUTION
OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2.
• When connecting and using a device manufactured by a third
party, enquire to the manufacturer as to whether the device
suits CLASS I, DIVISION 2.

This Class B digital apparatus complies with Canadian ICES003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
For Europe
(For models with a “CE” mark on the bottom of the computer)
Declaration of Conformity (DoC)
“Hereby, we declare that this Personal Computer is in compliance with the essential requirements and other
relevant provisions of the Directive 1999/5/EC.”
Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact our web
address: http://www.doc.panasonic.de
Contact:
Panasonic Services Europe
A Division of Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Network connection.
The terminal equipment is intended for connection to the following public network;
In all the countries of European Economical Area;
- Public Switched Telephony Networks
Technical Features.
The terminal equipment includes the following features;
- DTMF dialing
- Maximum bitrate receiving mode: 56 kbit/s
- Maximum bitrate sending mode: 33.6 kbit/s
This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Sweden,
Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and
Austria.
-------------------------------------------------------------------------------------------------------------------------------------------Compliance Notice - CE Mark
This equipment is in conformance with the requirements of the European Council Directive listed below:
73/23/EEC Low Voltage Directive with amendment 93/68/EEC
89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC
1999/5/EC R&TTE
--------------------------------------------------------------------------------------------------------------------------------------------
Getting Started

Industry Canada
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Read Me First
For France and Italy

Communication using Bluetooth outdoor is against the law.
Do not use Bluetooth outdoors.
Getting Started
Important Safety Instructions / Importantes Mesures De Sécurité
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
Certaines mesures de sécurité doivent être prises pendant l’utilisation
de matérial téléphonique afin de réduire les risques d’incendie, de
choc électrique et de blessures. En voici quelquesunes:
1.Do not use this product near water, for example, near a bath
tub, washbowl, kitchen sink or laundry tub, in a wet basement
or near a swimming pool.
2.Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
3.Do not use the telephone to report a gas leak in the vicinity of the leak.
4.Use only the power cord and batteries indicated in this manual.
Do not dispose of batteries in a fire. They may explode. Check
with local codes for possible special disposal instructions.
1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une
baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver,
dans un sous-sol humide ou près d’une piscine.
2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans
fil) pendant un orage électrique. Ceci peut présenter un risque
de choc électrique causé par la foudre.
3.Ne pas utiliser l’appareil téléphonique pour signaler une fuite
de gaz s’il est situé près de la fuite.
4.Utiliser seulement le cordon d’alimentation et le type de piles
indiqués dans ce manual. Ne pas jeter les piles dans le feu:
elles peuvent exploser. Se conformer aux règlements pertinents
quant à l’élimination des piles.
SAVE THESE INSTRUCTIONS
CONSERVER CES INSTRUCTIONS
Information to the User

This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product
however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe
this product is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of
scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may
be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example
include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this
product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference
caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized
resellers or distributors are not liable for damage or violation of
government regulations that may arise from failing to comply
with these guidelines.
Lithium Battery
Lithium Battery!
This computer contains a lithium battery to enable the date, time,
and other data to be stored. The battery should only be exchanged
by authorized service personnel.
Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de
sauvegarder certaines données, notamment la date et l'heure. La
pile ne doit être remplacée que par un technicien qualifié.
Danger! Risque d'explosion en cas de non respect de cette mise
en garde!
The CF-18 was developed based on thorough research into the
real-world portable computing environments. Exhaustive pursuit
of usability and reliability under harsh conditions led to innovations such has the magnesium alloy exterior, vibration damped
hard disk drive and floppy disk drive, flexible internal connections. The CF-18’s outstanding engineering has been tested using the strict MIL-STD- 810F (for vibration and shock) and IP
(for dust and water) based procedures.
As with any portable computer device precautions should be taken
to avoid any damage. The following usage and handling procedures are recommended.
Before putting the computer away, be sure to wipe off any moisture.
Avoid Radio Frequency Interference
Do not place the computer near a television or
radio receiver.
Avoid Magnetic Fields
Keep the computer away from magnets.
Data stored on the hard disk may be lost.
Keep Small Objects Away
Do not insert paper clips or other small objects
into the computer.
Do Not Disassemble the Computer
Do not attempt to disassemble your computer.
Avoid Excessive Force on the Display
Do not apply excessive downward force on the
display when it is completely opened, especially
when plugs and/or cables are connected to the
rear of the computer.
Avoiding Low-temperature Burns
Avoid more than casual contact with any heat producing area of the notebook computer, AC adaptor, and any option or accessory you use with it.
Even low heat (warmer than body temperature),
can cause a burn if the skin is exposed to the heat
source for a long period of time.
Do not touch the computer and cable when it
starts thundering
Do not connect a telephone line, or a network
cable other than the one specified, into the
LAN port
If the LAN port is connected to a network such
as the ones listed below, a fire or electric shock
may result.
• Networks other than 100BASE-TX or
10BASE-T
• Phone lines (Telephone lines, internal phone
lines (on-premise switches), digital public
phones, etc.)
Keep SD Memory Cards away from infants
and small children
Accidental swallowing will result in bodily injury.
In the event of accidental swallowing, see a doctor
immediately.
Precautions (Battery Pack)
Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage.
Avoid Heat
Do not throw the battery pack into a fire or
expose it to excessive heat.
Keep Articles Away
Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
Do Not Disassemble
Do not insert sharp objects into the battery pack,
expose it to bumps or shocks, deform, disassemble, or modify it.
Do Not Short
Do not short the positive (+) and negative (-)
contacts.
Avoid Extreme Heat, Cold and Direct Sunlight
Do not charge, use or leave the battery pack for
extended periods where it will be exposed to direct sunlight, in a hot place (in a car on a sunny
day, for example), or in a cold place.
Do Not Put into a Microwave
Do not put the battery pack into a microwave
oven or a pressurized chamber.
Stop Using
Should the battery emit an abnormal odor, become hot to the touch, become discolored,
change shape, or become in any way different
from normal, remove it from the computer or
charger and stop using it.
Do Not Use With Any Other Computer
The battery pack is rechargeable and was intended for the specified computer or charger. Do
not use it with a computer other than the one for
which it was designed.
Do not use this computer with a battery pack
other than the one specified (the one included
with the computer or the specified battery
pack sold separately)
Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts
are dirty or damaged.
Do not expose the battery pack to water, or allow it to become wet.
Getting Started
Precautions
Read Me First
Getting Started
Precautions (Battery Pack)
If the battery pack will not be used for a long period of time
(a month or more), charge or discharge (use) the battery pack
until the remaining battery level becomes 30% to 40% and
store it in a cool, dry place.
This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx.
95% of capacity.
The battery pack is not charged when the computer is first
purchased. Be sure to charge it before using it for the first
time. When the AC adaptor is connected to the computer,
charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not
rub your eyes. Immediately flush your eyes with clear water
and see a doctor for medical treatment as soon as possible.
NOTE
The battery pack may become warm during recharging or
normal use. This is completely normal.
Recharging will not commence if internal temperature of
the battery pack is outside of the allowable temperature
range (0 °C to 50 °C {32°F to 122 °F})
“Battery Power”. Once the allowable range requirement is
satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is
10 °C {50 °F} or below.)
If the temperature is low, the operating time is shortened. Only
use the computer within the allowable temperature range.
This computer has a high temperature mode function that
prevents the degradation of the battery in high tempera“Battery Power”) A level
ture environments. (
corresponding to a 100% charge for high temperature mode
is approximately equivalent to an 80% charge level for
normal temperature mode.
The battery pack is a consumable item. If the amount of
time the computer can be run by using a particular battery
pack becomes dramatically shorter and repeated
recharging does not restore its performance, the battery
pack should be replaced with a new one.
When transporting a spare battery inside a package,
briefcase, etc., it is recommended that it be placed in a
plastic bag so that its contacts are protected.
Always power off the computer when it is not in use.
Leaving the computer on when the AC adaptor is not
connected will exhaust the remaining battery capacity.
For Used in Motor Vehicle /
Pour L’utilisation Dans Un Véhicule
Motorisé
Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle
related functions such as vehicle information, system control,
rear or side observation and navigation. If used for entertainment purpose, such as television reception or video play, it must
be installed to the rear of the driver’s seat where it will not be
visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to determine
lawful use of this product while operating within a motor vehicle.
Avertissement: L’ordinateur bloc-notes peut être installé dans un
véhicule motorisé et dans le champ de vision du conducteur
uniquement en tant que dispositif d’aide aux fonctions du
véhicule, comme par exemple pour fournir des informations sur
le véhicule, comme dispositif de contrôle de système, pour
l’observation à l’arrière ou sur les côtés du véhicule, ainsi que
pour fournir de l’information routière. Pour toute utilisation à fin
de divertissement, comme par exemple pour regarder la télévision
ou jouer à des jeux vidéo, il doit être installé à l’arrière du siège
du conducteur, en un emplacement où il ne sera pas visible, ni
directement ni indirectement, pour le conducteur du véhicule
motorisé. Vérifiez les lois fédérales et nationales qui régissent
l’utilisation légale de cet appareil à l’intérieur d’un véhicule
motorisé.
Names and Functions of Parts
The illustrations shown may differ from the actual physical appearances.


Bluetooth Antenna
Wireless LAN Antenna
“Bluetooth”)
Pen (
“Wireless LAN”)
page 21)
LED Indicators
LCD (
Getting Started
Keyboard
page 21)
“LED Indicators”)
Function Keys
Caps Lock
Numeric Key (NumLk)
Scroll Lock (ScrLk)
Hard disk drive status
Battery pack status
Power status
For information on the key combinations available.
“Key Combinations”)
Hard Disk Drive
“Hard Disk Drive”)
Power Switch
Touch Pad
page 20)
Battery Pack
“Battery Power”)
Tablet Buttons
“Tablet Buttons”)
LCD brightness control
Input Panel
Enter
Rotation
Security
CAUTION
Do not cover the computer with a thick cloth, such as a blanket.
A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8BATTERY for information on how to recycle this battery.
L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour des
renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.
Names and Functions of Parts
External Display Port
Security Lock LOCK
A cable can be connected. For more information, read the manual provided
with the cable.
“External Display”)
Getting Started
Modem
Microphone Jack
Use only a monaural condenser microphone (miniature jack). Using an input
source other than a monaural condenser
microphone may not allow audio to be
input or may damage the equipment.
“Modem”)
LAN
“LAN”)
CAUTION
Headphone Jack
Do not connect the modem telephone cable into
the LAN port.
Use this jack to connect headphones or
amplifier-equipped speakers. Audio output from the internal speaker is disabled
when headphones or external speakers
are connected.
PC Card Slots
“PC Cards”)
SD Memory Card Slot
“SD Memory Card”
and “SD Memory Card Security
Function”)
DC-IN Jack
DC IN 16 V
USB Ports
“USB Devices”)
SD Memory Card Indicator
“LED Indicators”)
Hand Strap
The hand strap can be attached to any two of the four corners using
screws (A) which were used to attach the hand strap.
Adjust the length of the belt so that the computer does not fall by mistake, and firmly hold the computer when using it.
CAUTION
(The above illustration shows the position
where the hand strap is attached at the factory.)
Shoulder Strap
The shoulder strap can be connected to the hand
strap to make it longer.
10
The strap has been designed to carry only the weight of the computer. Therefore, be sure that the strap does not carry a weight
that exceeds the weight of the computer. The strap may accidentally come loose from the computer.
Do not use a strap that is damaged or about to tear.
(
Expansion Bus Connector
“Port Replicator”)
CAUTION
RAM Module Slot
“RAM Module”)
Getting Started
Do not allow metallic objects or magnetic media to come near these areas.
Speaker
To adjust the volume:
Fn + F5 / Fn + F6
Speaker on/off : Fn + F4
CAUTION
Do not allow metallic objects or magnetic media to come near the speaker on the bottom surface of the computer.
• Because the speaker contains a magnet, metal
objects may become attached to the bottom
surface of the computer. This may cause the
computer to be unstable, or may mark the surface of the desk on which it is sitting.
• If floppy disks, magnetic memory cards, or
other magnetic media approach the speaker,
there is a risk that data will be destroyed.
11
Names and Functions of Parts
Using the Tether
Getting Started
The tether can be attached to the bottom right or bottom left corner of the display. It prevents the
pen (included) from falling accidentally.
Attaching the Tether
Tether
CAUTION
When closing the display, be careful not to catch the tether between the display and main
part of the computer. (See the figure below.)
12
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.
1 Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or are not working properly, contact Panasonic Technical Support.
Battery Pack ........ 1
AC Cord ............... 1
Model No : CF-VZSU30B
Model No : CF-AA1623A
Modem Telephone
Cable ...................... 1
Pen .......................... 1
Soft Cloth ............... 1
Tether ...................... 1
Shoulder Strap ........ 1
Getting Started
AC adaptor .......... 1
“Digitizer (Advanced)”)
Operating Instructions
(This book)*1 ................. 1
Windows® Book .... 1
Product Recovery
CD-ROM ................. 4
Latch
page 12)
page 10)
*1 If additional instructions are included with the computer, be sure to read them. It may be
necessary to perform additional operations during the following procedures.
2 Read the LIMITED USE LICENSE AGREEMENT. (
page 37)
Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the seal
on the computer’s packaging.
3 Insert the battery pack.
1 Unlock the cover by sliding the latch to the right.
2 Slide the latch down, and then without releasing it, open the cover as illustrated.
Cover
3 Slide the battery pack inward until it is firmly in place.
CAUTION
Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly.
Be sure to insert the battery pack as illustrated.
4 Close the cover until it clicks into place.
5 Lock the cover by sliding the latch to the left.
CAUTION
Confirm that the latch lock is correctly in place. If you carry your computer without the latch lock in place, the battery pack may fall out.
Before using the battery pack, carefully read “Precautions (Battery Pack)”
page 7-8).
13
First-time Operation
DC-IN Jack
4 Connect your computer to a power outlet.
DC IN 16 V
CAUTION
Be sure the AC adaptor is connected until completing the first-time use operation.
When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.
Getting Started
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless the battery pack is installed.
Latch B
5 Open the display.
Pull up latch A and release latch B.
Lift open the display.
Latch A
Power Switch
6 Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.
CAUTION
Do not slide the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
Do not slide the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
Power Indicator
Windows.
7 Setup
Moving the cursor or clicking buttons can be performed with the touch pad (
page 20).
CAUTION
Do not press any keys or touch the touch pad until [Windows XP Professional
Setup] is displayed.
1 At [Welcome to the Windows XP Setup Wizard], select [Next].
2 After reading the agreement, select [I accept this agreement] or [I don’t accept this
agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
14
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
6 Enter the correct date, time and time zone, then select [Next].
NOTE
Getting Started
It may take some time before the computer restarts and the screen of step
7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
The computer will restart.
7 Enter your administrator password and select
NOTE
If the message “Wait several minutes while the optimal configuration is
being set. Do not shutdown the computer during this process.” is displayed,
wait and do not press any keys, or touch the touchpad, etc.
When Windows setup is completed, the following message will be displayed
at the bottom right of the screen: “Your computer might be at risk.” Continue to the next step.
The message is generated by the [Security Center] function in [Control Panel],
and does not indicate an error or malfunction. For more information about
page 26.
“Security Center”,
If the cursor can not be pointed correctly with the pen, perform [Calibration] in [start]
- [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].
When you perform the calibration, hold the pen at the same angle as you would
when actually using it.
Perform the calibration separately for [Landscape] and [Portrait].
8 Create a new account.
Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
NOTE
When creating a new user account:
• If you make mail settings, create password reset disks (
page 16), or
conduct other related operations before creating the user account, you
will be unable to use any previous mail history or settings.
• When you create the first new account, you can only select [Computer
administrator].
Once a “Computer Administrator” account has been created, you can create additional limited user accounts.
Note also that only the added user account will be displayed in the Welcome screen. The account for the administrator created during Windows
setup will not be displayed.
Enter a name for the new account, then select [Next].
Select [Computer administrator], then select [Create Account].

Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
page 16)
operated. You can create a password reset disk beforehand. (
Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
15
First-time Operation
NOTE
Getting Started
About the Icon Enlarger:
• If the characters or icons on the screen are too small and difficult to see, after completing step 8, select [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. This will
allow you to magnify the display of characters and icons on the screen.
• The [Icon Enlarger] can be set separately for each account.
You can also use [Loupe Utility], which enlarges a part of the screen. (
“Loupe
Utility”)

If you use the wireless LAN, be sure to refer to
“Wireless LAN”.
This concludes the first-time use operation guidelines.
Information for Windows XP
Depending on the Windows settings, installed applications, and drivers, menus and
other displays may differ, or some functions (such as use of the password reset disk)
may be inoperable. Check with your system administrator for details.
You can select Classic view for the Control Panel or select the Classic Start menu.
You can also change the way a user logs on or off.
The procedure in this manual uses the method or view of the Windows XP default
setting (not Classic view or Classic Start menu etc.).
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following
the steps below.
1 Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.
2 Select [start] - [Control Panel] - [User Accounts].
3 Select the account you used to log on and select [Prevent a forgotten password]
from [Related Tasks] menu.
Create a password reset disk following the on-screen instructions.
Store the password reset disk in a safe place.
• Only the logon password for each account can be reset.
The password set in the Setup Utility (
“Setup Utility”) cannot be reset.
16
Starting Up/Shutting Down
Starting Up
Latch B
Latch A
Open the display.
Pull up latch A and release latch B.
Lift open the display.
2 Turn your computer on.
Slide the power switch and hold it for approximately one second until the power
indicator turns on before releasing it.
Power Switch
Power Indicator
While booting, avoid the following until the hard disk drive indicator
has
turned off.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch or the tablet buttons.
• Performing any keyboard, touch pad, digitizer (or external mouse) operations.
• Closing the display.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
When using this computer with the battery pack only, it may take some time
for the power to turn on after sliding the power switch. In this case, slide the
power switch and hold it for more than one second. This phenomenon occurs
because the standby power is minimized while the power is turned off; it is
not a malfunction.
When the CPU temperature rises, the computer may not power on to prevent
the CPU from overheating. Should this happen, allow the computer to cool
down then switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
Operation
CAUTION
NOTE
When the power is turned on in a low-temperature environment, sometimes
the message “Warming up the system. Please wait...” is displayed (up to 25
minutes) or the battery indicator alternately blinks green and orange. This function is designed to prevent hard disk drive malfunctions that may occur at low
temperatures. Wait for the computer to start up.
17
Starting Up/Shutting Down
3 Log on to Windows.
After confirming that the hard disk drive indicator has turned off, select the user and
input the password, then select . Until the correct password is entered, the computer
will not operate.
4 Select your application.
You are able to start working on your computer.
NOTE
The power saving function is factory set, so if there is no input from a key, the touch
pad, the tablet button, the digitizer or an external mouse (when one is connected) for
a certain interval of time, the power to the LCD and hard disk may be turned off. The
LCD will resume operation when the touch pad, the digitizer or an external mouse
(when one is connected) is used or a key or the tablet button is pressed.
The power to the LCD may be turned off even when an application software is being
installed. In this case, because it is conceivable that a selection dialog box will be
shown, do not press Space or Enter to attempt to resume from this condition
as doing so may trigger a selection, but instead, press a key unrelated to the direct
triggering of a selection, like Ctrl .
In addition, when the computer is left alone, it automatically enters the standby or
hibernation mode. The computer will resume by sliding the power switch. (
“Standby/Hibernation Functions”)
Operation
If [Enter Password] is displayed,
Enter your password*1 and press Enter . (
Enter Password [
“Security Measures”)
The correct password
Will Start
Three incorrect attempts
or
No password for about a
minute
Will Not Start
(Power off)
*1 Supervisor Password or User Password set in the Setup Utility (not the
Windows password).
18
Shutting Down (power off your computer)
1 Save important data and close each application.
2 Select [start] - [Turn Off Computer].
3 Select [Turn Off].
Your computer will power off automatically.
Restarting your computer (without shutting down)
Select [Restart].
To shut down using the keyboard;
Press
, U , and select [Turn Off] with
U .
CAUTION
Do not do the following during the shutdown/restart procedure.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, digitizer, tablet buttons, or external mouse
operations.
• Closing the display.
Operation
NOTE
To quickly resume computer operation after shutting down,
“Standby/Hibernation
The standby or hibernation function is available (
Functions”).
When you leave the computer or interrupt your work...
If you use the “Standby” or “Hibernation” function, then when you turn on the
power next time, the application software and files you were using before will be
displayed, and you can restart the same operations immediately (
“Standby/
Hibernation Functions”).
4 Close the display.
1 Close the display.
2 Pull up latch A.
Latch A
3 Position latch B on the display side, then bring latch A down to fix the display in
Latch B
place.
Latch A
19
Touch Pad (Basic Operation)
Work Surface
Use the touch pad to move the cursor on the display and perform normal computer operations.
For more details, refer to
“Touch Pad”.
Function
Touch Pad Operation
Moving the Cursor
Move the tip of your finger lightly
over the work surface.
Tapping/Clicking
or
Right Button
tapping
Left Button
clicking
To right-click: click with the right button.
Double-Tapping/
Double-Clicking
or
double-tapping
double-clicking
Dragging
Operation
or
Two quick taps, but on While holding down the
the second tap leaving button, moving your finyour finger down (apply- ger on the work surface.
ing pressure) and moving
it on the work surface.
Handling the Touch Pad
By design the touch pad is to be used with a finger tip only. Do not place any object on the
work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard objects
that can leave marks (e.g., pencils and ball point pens).
Try to avoid having any harmful substances such as oil, come in contact with the touch pad.
The cursor may not work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with
detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,
e.g., discoloration. In addition, do not use commercially-available household cleaners and
cosmetics, as they may contain components harmful to the surface.
20
Digitizer (Basic Operation)
Your computer is equipped with a digitizer function allowing you to perform the same operations
as the touch pad or mouse by touching the surface of the display with the pen (included). (The
following explanation gives one example (for the default settings).)
“Digitizer
The operation settings can be changed. For detailed information, refer to
(Advanced)”.
Moving the cursor
Clicking
You can move the cursor by
bringing the pen close to the
screen, without actually
touching the screen’s surface.
Pen
Cursor
Double-clicking
Two quick
taps
One tap
Dragging
Touch and hold the object (i. e.
file or icon), move the pen on
the surface (dragging the object to the desired location),
then release the pen.
Right-clicking
Press and hold down
the pen button, then
tap the object.
Handling the Digitizer
Use the pen included with the computer. You cannot use an implement other than the pen that
comes with the computer.
Do not place any object on the surface or press down forcefully with sharp-pointed objects
(e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens).
Do not operate the computer when such things as dust are on the screen. Doing so may
scratch the screen.
When the screen becomes dirty:
Wipe to remove dirt by using a dry soft cloth included with the computer.
• Do not use benzene or thinner, or rubbing alcohol.
• For more information, refer to “Suggestions About Cleaning the LCD Surface” that comes
with the soft cloth.
Because the digitizer uses electromagnetic induction, it may malfunction in locations such as
the following, where strong electrical fields or magnetic fields occur:
• Near AM radio base station or relay station antennas
• Near some CRT displays that generate strong electromagnetic field noise
Even if the digitizer does malfunction, it will return to normal operations when the computer
is no longer in close proximity to the locations described above.
Operation
Pen Button
Handling the Pen
The pen has a built-in pressure sensor to detect the touch of the pen tip. Avoid strong shocks
(such as dropping the pen), excessive pressure on the pen tip, or allowing the pen to become
wet. These may result in malfunctions or damage to the pen.
Clean the pen tip and screen prior to operation. Foreign particles can scratch the screen and
impede the operation of the pen.
Use the pen only for the computer screen. Using it for any other purpose may damage the pen
and scratch the screen.
Do not move the pen too quickly. If the pen moves too quickly, the cursor may be unable to
follow its movement.
21
Operating in Tablet Mode
In addition to being used as a regular notebook computer (Laptop mode), this computer can also
be operated in Tablet mode. Simply turn the display around 180°, and close the computer with
the display facing up. In Tablet mode, the computer can be operated using the digitizer (
page 21), the Input Panel and the tablet buttons (
“Tablet Buttons”), instead of the
internal keyboard and the touch pad.
Set the computer in Tablet mode using the following procedure.
1 Open the display so that it is perpendicular with the body of the computer.
2 Slide latch C to the right, and then without releasing it, turn the display clockwise by 180°.
CAUTION
Do not rotate the display more than 180° or attempt to rotate the display counterclockwise.
Latch C
3 Close the computer with the display facing up.
4 Pull up latch A.
Operation
Latch A
Latch B
5 Position latch B on the display side, then bring latch A down to fix the display in place.
Latch A
NOTE
To return to Laptop mode:
Perform the steps for changing the computer into
Tablet mode, only in reverse order.
1 Pull up latch A and release latch B.
2 Open the display.
3 Slide latch C to the right, and then without releasing it, turn the display counter-clockwise
by 180°.
Latch C
Usage Example
In Tablet Mode, the computer can be operated while holding the body as shown in the figure.
22
Changing the Display Settings
Pen
To rotate the display
Press the rotation button
until the display is set at the angle
that is most comfortable for you.
For detailed information, refer to
“Display Rotation”.
NOTE
LCD brightness control
Input Panel
Enter
Rotation
Security
You can set the computer so that the display automatically rotates to your preferred
angle when changing from Laptop mode to Tablet mode or vice versa. (
“Display Rotation”)
To adjust the brightness of LCD
Press the LCD brightness control buttons
Inputting Characters
Press the Input Panel button
or select
on the taskbar.
[Tablet PC Input Panel] shown below will appear, and characters can be input with the pen
(included). For detailed information, refer to Windows help.
NOTE
When using the digitizer function, use only the pen included with the computer.
Operation
Tablet Buttons
23
Reference Manual
Reference Manual / Important Tips
The Reference Manual and the Important Battery Tips can be accessed on your computer. When
a printer is connected, these manuals can also be printed.
Reference Manual
The Reference Manual explains functions for you to make greater use of the computer, such
as how to add peripheral devices, how the Setup Utility works, and other useful information.
(Refer to the cover of this manual for a list of the main contents included.)
How to access the Reference Manual
Select [Reference Manual] in [start].
Important Battery Tips
Important Battery Tips provides information on how to maximize use of the battery pack,
which is necessary for computing away from your home or office.
How to access the Important Battery Tips
Select
on the desktop.
Operation
Important Battery Tips can also be accessed from [start] - [All Programs] - [Panasonic] [On-Line Manuals] - [Important Battery Tips].
24
When the Reference Manual or Important Battery Tips is accessed for the first time, the License
Agreement of the Adobe Reader may be displayed. If it is displayed, after reading the agreement,
select [Accept] to access the Reference Manual or Important Battery Tips.
Refer to Adobe Reader Help to use the Adobe Reader.
NOTE
Illustrations may be difficult to view depending on the magnification. If the illustration is
too small, magnify the display.
If a printer is connected, we recommend printing the pages required. Depending on the
printer, the illustrations and display samples may not be printed with a high quality.
Useful Information
Usage Environment
Environment
Operation: Temperature: 5 °C to 35 °C {41 °F to 95 °F}
Humidity : 30% to 80% RH (No condensation)
Storage:
Temperature: -20 °C to 60 °C {-4 °F to 140 °F}
Humidity : 30% to 90% RH (No condensation)
Even within the temperature and humidity ranges noted above, using the computer for
long periods of time in an environment with exceptionally low or high temperatures or
high humidity may result in deterioration of the product, which can lead to a reduction in
product life.
NOTE
Only use the computer within the allowable temperature range.
When the computer is left powered on in a low temperature environment, set [Turn off
hard disks] to [Never] in the following menu to avoid damage to the hard disk drive.
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power
Schemes]
Such areas may result in damage to the computer.
Areas with electronic equipment
These areas may interfere with your display or cause your computer to produce strange
sounds.
Areas with extremely high/low temperatures
Do not leave things near the computer that are sensitive to heat. During operation, the
computer may become warm.
Before putting the computer away, be sure to wipe off any moisture.
Handling
Operation
Places not to use your computer
This computer has been designed so as to minimize shock to the LCD and hard disk drive, the
leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such
trouble. Therefore, as a precision instrument, be extremely careful when handling.
When carrying the computer, be sure to keep to the following:
Turn off the computer.
Remove all external devices, cables, PC Cards protruding from the computer (see the figure
on the left) and SD Memory Cards before transporting the computer.
Do not drop or hit your computer against solid objects.
Do not place the computer upright or allow it to tip over. When the computer receives
extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become
inoperable.
Do not carry the computer while the display is open, or carry it by gripping the display.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
When taking an airplane, always carry your computer with you. Never check it in with
luggage. Before using the computer inside an airplane, we recommend asking the airlines
regarding their policy on this issue.
When transporting a spare battery pack inside a package, briefcase, etc., it is recommended
that it be placed in a plastic bag in order to protect its contacts.
We recommend the following:
Preparing a fully charged battery pack.
Making backup copies on discs and carrying them with you.
25
Useful Information
Maintenance
Touch Pad
page 20
Display
Use the Soft Cloth included with the computer. (For more information, refer to “Suggestions
About Cleaning the LCD Surface” that comes with the Soft Cloth.)
If the Protective Film becomes damaged, it may be time to replace your Protective Film. The
Protective Film is a disposable item. To find out the model number of your Protective Film,
contact Panasonic Technical Support. (For more information, refer to the “Operating Instructions” that come with the Protective Film.)
CAUTION
Do not touch the screen before you re-attach a Protective Film, as you may leave a mark
or a scratch on the screen.
Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the
soft cloth and firmly wringing out excess water.
CAUTION
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the
surface, e.g., discoloration. In addition, do not use commercially-available household
cleaners and cosmetics, as they may contain components harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it to work improperly or be damaged.
Operation
Security Center/Antivirus Protection
26
Use the Windows Security Center function to protect Windows from damage by computer
viruses, etc.
Windows Security Center
What is Windows Security Center?
The Windows Security Center allows centralized management of Windows security information, and monitors antivirus measures and other Windows security settings to ensure
optimum safety.
Use the Windows Security Center function to protect your computer from damage by viruses, etc.
Select [start] - [Control Panel] - [Security Center] to display the current settings for the
following security functions.
• Windows Firewall
A security system for protecting the computer from unauthorized access via the Internet
or other external networks.
The firewall regulates the data exchanged between the computer and the external network, so that only approved data can pass through.
At the time of purchase, the Windows Firewall is set to be enabled.
• Automatic Updates
If your computer is connected to the Internet, this function regularly checks whether security updates and other important updates have been made available, and automatically
installs these updates in their latest conditions.
• Virus Protection
This function regularly checks whether antivirus software has been installed in the computer, and whether the version of that software is the latest version available.
If the message “Your computer might be at risk” is displayed
Read the message, select
(red icon) on the taskbar, and make the appropriate settings.
page 26) displays to confirm the securityThis message, which the Windows Security Center (
related settings regularly, will be displayed until the settings are made more properly.
NOTE
This message does not indicate an error. You can use the computer while the message is
displayed. However, in order to operate the computer more safely, we recommend making the appropriate measures to reduce damage from virus and other attacks, thus avoiding the appearance of this message.
The Pop-up Blocker
In Windows XP, security functions have been strengthened with regard to Web contents.
One of these is the “Pop-up Blocker,” which may prevent some Web pages from being displayed.
Computer Viruses
Users are advised to purchase the latest versions of virus protection software and use
them regularly.
We recommend you run the software:
• When booting your computer.
• After receiving data.
We recommend that you check data received on disks or from external sources, such as data
downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
Operation
For Data Execution Prevention (DEP), you can make one of the settings in the following menu.
[start] - [Control panel] - [Performance and Maintenance] - [System] - [Advanced] - [Settings]
(in [Performance]) - [Data Execution Prevention]
For more information, refer to Windows help.
Windows Update
You can use the latest patches and service packs for Windows with the following menus.
Do not apply “Driver Updates” even if a message to update a driver appears. If a driver
page 46)
update is required, contact Panasonic Technical Support. (
[start] - [All programs] - [Windows Update]
Saving Data on the Hard Disk
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make your
software applications and data unusable.
Do not power down your computer while software applications are running or hard
disk drive indicator is on.
Properly shut Windows down to avoid problems.
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or should
you inadvertently change or erase data.
Use the security function for all important data. (
“Security Measures” and
“SD Memory Card Security Function”)
Hard Disk Lock
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the
hard disk when the hard disk is installed in a different computer. When the hard disk is
returned to the original computer, you can read/write data as before. In this case, however,
make the settings in the Setup Utility exactly the same as they were before the hard disk
was removed. (Note that this Hard Disk Lock does not guarantee the complete protection
of data.) (
“Security Measures”)
27
Useful Information
When Using Peripheral Devices
Pay strict attention to the following points to avoid damage to the computer, peripheral devices,
cables, etc. Also, in addition to following this manual and the Reference Manual, carefully read
the instruction manuals for the peripheral devices being used.
Use only peripheral devices that conform to the computer’s specifications.
Connect the devices properly, paying close attention to the condition and position of the
connectors.
If a connection cannot be made easily, do not apply undue force; check once more to confirm
the condition and position of the connector (alignment of pins, etc.).
If the connector has holding screws, fasten the screws firmly.
Do not carry the computer with cables attached, and do not pull on the cables forcefully.
When Changing Hard Disk Partitions
When using the hard disk backup function, divide the hard disk into partitions when a backup
page 39). If you divide the hard disk into partitions before creating the
area is created (
backup area, the backup area cannot be created.
Operation
When Disposing of or Transferring Ownership of This Device
When disposing of or transferring ownership of this device, erase all data on the hard disk in order
to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through
normal Windows commands, data can still be read using special software. In order to erase all
data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility
(included) (
page 43). (Note that this hard disk data erase utility does not guarantee that data
will be completely erased.)
Also, note that if you transfer ownership of this device without deleting commercial software that you have installed to the hard disk, you may be in violation of the licensing
agreement for that software.
Wireless LAN (only for models with wireless LAN)
To prevent theft of data or unauthorized access to the hard disk
via a wireless LAN.
If you plan to use wireless LAN functions, we recommend that you do so only after making
the appropriate security settings, such as for data encryption.
28
List of Error Codes
When turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below.
page 46).
If the problem persists, or if the error code or message displayed is not shown here, contact Panasonic Technical Support (
0251: System CMOS checksum
bad - Default configuration
used
0271: Check date and time settings
0280: Previous boot incomplete
- Default configuration used
Press  to Setup
Operating System not found
Extended RAM Module Failed
Action
If an external keyboard or mouse is connected, disconnect these devices.
An error has occurred in the memory that stores the Setup Utility settings. This error occurs
when the memory content is changed through some inadvertent operation by a program or
other function.
Run the Setup Utility and load the default values, then change the settings to the appropriate values as needed.
If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic
Technical Support.
The date and time setting are incorrect.
Run the Setup Utility and set the date and time correctly.
If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic
Technical Support.
Startup has failed repeatedly, so the Setup Utility settings have been returned to their default
values, and the computer has been booted.
Run the Setup Utility and load the default values, then change the settings to the appropriate values as needed.
Write down the error details and press F2 to run the Setup Utility. Confirm the settings,
and change the settings to the appropriate values as needed.
The OS is not properly installed on the floppy disk or the hard disk that you are trying to boot from.
If the computer cannot be booted from the floppy disk, check the floppy disk drive to
ensure that the disk is in fact bootable, and use another bootable disk if not.
If the computer cannot be booted from the hard disk, confirm whether the hard disk is
properly recognized in [Information] menu of the Setup Utility.
• If the hard disk is recognized, perform the reinstallation procedure.
• If not, contact Panasonic Technical Support.
If a device is connected to the USB port, disconnect the device, or run the Setup Utility
and set [Legacy USB Support] in [Advanced] menu to [Disable].
If the extended RAM module has not been inserted properly, or if an extended RAM
module other than one matching the specifications has been inserted, a beep will sound
and the message “Extended RAM Module Failed” will be displayed when turning the
power on. In this case, turn the power off, confirm that the extended RAM module meets
the specifications, and reinsert it.
To run the Setup Utility
1 Restart the computer.
2 Press F2 while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure.
Troubleshooting
Error Code/Message
0211: Keyboard error
29
Dealing with Problems (Summary)
When a problem occurs, refer to this page. The “Reference Manual” also contains detailed information. If a problem appears to be
related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic
page 46). You can use the PC Information Viewer to check the computer’s usage status. (
Technical Support (
“Dealing with Problems (Advanced)”)
Starting Up
The power indicator is not
lit
Check the cable connection for the AC adaptor.
Check to see if a charged battery pack is properly installed.
Remove the battery pack and disconnect the AC adaptor, then connect them again.
The computer does not operate when a USB device is
connected
The computer may not operate when certain USB devices are connected. Disconnect the
USB device, or set [Legacy USB Support] to [Disable] in [Advanced] menu of the Setup
Utility.
[Enter Password] is displayed
Input your Supervisor Password or User Password. If you have forgotten it, contact Panasonic Technical Support.
POST Startup Error(s) is
displayed
Windows startup, or an operation is extremely slow
Press F9 in the Setup Utility (
“Setup Utility”). This will restore the Setup
Utility’s settings to their default values (except the password settings). Then, the Setup
Utility must be run once again for you to input the appropriate operating environment
settings. (The processing speed depends on the application software used, so this operation may not cause the processing speed to increase.)
If you install resident software after purchasing this computer, disable the resident software.
When Indexing Service is enabled, Windows operation becomes slower.
Disable Indexing Service in the following menu.
[start] - [Search] - [Change preferences] - [Without Indexing Service]
The date and time are incorrect
You can set the date and time using the following menu.
[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]
When the computer is connected to a LAN, confirm the date and time of the server.
If you continue to experience problems, the internal battery maintaining the clock may
need to be replaced. Contact Panasonic Technical Support.
This computer will not correctly recognize the date and time starting from the year 2100 A.D.
Even when a password has been set in the Setup Utility, [Enter Password] does not appear
when the computer resumes from the standby or hibernation mode.
If you want to use the security function when using the standby or hibernation mode, use the
Windows password as follows:
1 Select [start] - [Control Panel] - [User Accounts], and select the account for which the
password will be set.
2 Select [Create a password], input the password, and then select [Create Password].
3 Add the check mark for [Prompt for password when computer resumes from standby]
in [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].
If you have created a password reset disk (
page 16), a message is displayed when you
fail to correctly enter the password. Follow the message’s instructions and set the password again by using the password reset disk.
If you have not created a password reset disk, after reinstalling, setup Windows and then
set the password again.
Troubleshooting
When resuming from the
standby or hibernation
mode, [Enter Password]
does not appear even if a
password has been set in the
Setup Utility
When the administrator
password is forgotten
When “Remove disks or
other media. Press any key
to restart” (or a similar message) is displayed
[Executing Battery
Recalibration] screen is displayed
30
page 29
This means a floppy disk that does not contain system startup information has been left in
the floppy disk drive. Remove the floppy disk, and press any key.
This message may appear when certain USB devices are connected. Remove the USB device, or set [Legacy USB Support] in [Advanced] menu of the Setup Utility to [Disable].
If the message still appears even after trying the above two measures, this may be an
indication that some type of hard disk failure has occurred. Contact Panasonic Technical
Support.
When Windows is shut down during the Battery Recalibration procedure, if you select
[Cancel] in the [End Program] screen, Windows shutdown is aborted. In this case, Battery
Recalibration will begin the next time the computer is started. To start up Windows, turn
off the computer by sliding the power switch, and then turn it back on again.
Starting Up (continued)
When the previous item is
not the cause
Press F9 in the Setup Utility (
“Setup Utility”). This will restore the Setup
Utility’s settings to their default values (except the password settings).
Try removing all peripheral devices.
Check a disk error using the following procedure.
1 Select [start] - [My Computer], right-click [Local Disk(C:)] and then select [Properties].
2 Select [Tools] - [Check Now].
3 Select [Start] after selecting required items in [Check disk options].
At startup, hold down F8 when the [Panasonic] boot screen disappears*1, and release
your finger when the Windows Advanced Options Menu is displayed. Start the computer
in Safe Mode, and confirm the details of the error.
*1 When [Password on boot] is set to [Enable], [Enter Password] appears after the [Panasonic] boot
screen disappears. Hold down F8 soon after inputting the password and pressing Enter .
Entering Password
On the [Enter Password]
screen, a beep sounds and the
password cannot be entered
The computer may be in ten-key mode.
If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then
input.
Even after entering the password, [Type your password]
is displayed again
The computer may be in ten-key mode.
If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then
input.
The computer may be in Caps Lock mode.
If the Caps Lock indicator lights, press Caps Lock to disable the Caps Lock mode,
and then input.
No display after powering on
The power has not been
turned off, but after a certain period of time, there is
no display
When there is no display to an external display,
• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.
The display destination may be set to the external display.
Try changing the display destination by pressing Fn + F3 .
If you want to switch the display destination repeatedly by pressing Fn + F3 , make
sure that the display destination has switched completely each time before pressing
Fn + F3 again.
Press Fn + F2 and adjust the LCD brightness.
Has the computer been set to the power-saving mode?
To resume operation of your computer from the condition the power of the display is off
(for energy conservation purposes), press any key unrelated to the direct triggering of a
selection, like Ctrl .
To save power, your computer may have automatically entered the standby mode (power
indicator blinks green) or hibernation mode (power indicator turns off). In such cases,
slide the power switch.
When the battery pack is
used, the screen is darker
than when the AC adaptor
is connected
The LCD brightness
changes a number of times
when the AC adaptor is disconnected
Press Fn + F2 and adjust the LCD brightness. Note, however, that when the LCD
brightness is increased, the battery running time will become shorter.
The LCD brightness can be set to separate levels for when the AC adaptor is connected
and when it is disconnected.
Intel(R) Display Power Saving Technology (
“Computing on the Road”) is
active and automatically changes the LCD brightness.
Image colors are not reproduced as expected when displaying photographs or
other images
We recommend removing the check mark from [Intel(R) Display Power Saving Technology].
“Computing on the Road”)
Troubleshooting
Display
31
Dealing with Problems
(Summary)
Display (continued)
An afterimage appears (e.g.,
green, red, and blue dots remain on the display) or
there are dots not displaying the correct colors
The screen becomes disordered
The external display no
longer displays properly
When you want to display the
fonts or icons at a larger size
During simultaneous display, one of the screens becomes disordered
When a video such as an
MPEG file is being played
with Windows ® Media
Player, the display destination cannot be switched using Fn + F3
If an image is displayed for a prolonged period of time, an afterimage may appear. This is
not a malfunction. The afterimage will disappear when a different screen is displayed.
High-precision and advanced technologies are necessary in the production of color liquid
crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either
fail to light or remain constantly lit (that is, more than 99.998% of elements are functioning properly), no defect is considered to exist.
The screen display may become distorted if the resolution or number of colors is changed,
or if an external display is connected or disconnected while the computer is operating.
Restart the computer.
When an external display not compatible with the power saving mode is used with the
computer, the display may not function correctly when the computer enters the power
saving mode. In such cases, turn off the power to the external display.
Change the size of the icons, etc. using “Icon Enlarger” (
“Icon Enlarger”).
To enlarge a part of the screen, use Loupe Utility (
“Loupe Utility”).
Try changing the display by pressing Fn + F3 .
If you continue to experience problems, try changing the display destination in the following menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile]
- [Devices]
When the [Command Prompt] is set to “Full Screen” by pressing Alt + Enter , the
picture is displayed on one of the screens only. When the window display is restored by
pressing Alt + Enter , the picture is displayed on both screens.
Simultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.). When Fn + F3 is pressed, the screen is displayed on the external
display or internal LCD.
The display destination cannot be switched while a video such as an MPEG file is playing.
Stop playing the video before switching the display destination.
Shutting down
Windows cannot be shut
down or restarted
If a USB device is connected, try removing it.
It may take one or two minutes to shut down.
Troubleshooting
Battery Indicator
The red indicator lights
The battery level is very low (the charge is approx. 9% or less).
Connect the AC adaptor. You can use the computer when the battery indicator light is
orange. If you do not have an AC adaptor, save your data and power off your computer.
After replacing the battery pack with a fully charged one, turn your computer on.
The red indicator blinks
Quickly save your data and power off your computer. Remove the battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or charging circuit may be defective.
In high temperature mode, the battery is discharging to the level that corresponds to an
“Battery Power”). Do not re80%*1 charge for normal temperature mode (
move the battery pack while the battery indicator is blinking green. If you remove it, the
power will be turned off forcibly.
The green indicator blinks
*1 In high temperature mode, the level that corresponds to an 80% charge for normal temperature
mode is displayed as [100%].
The battery indicator blinks
green and orange alternately
32
Warming up the system to prevent hard disk drive malfunctions at low temperature. Leave
your computer as is. Once the allowable temperature range requirement is satisfied, your
computer will start automatically.
Battery Indicator (continued)
The orange indicator blinks
Battery cannot be recharged temporarily because the internal temperature of the battery
pack is outside of the acceptable temperature range for recharging. Once the allowable
range requirement is satisfied, charging begins automatically. Your computer can be used
normally in this state.
Touch Pad / Digitizer
The cursor cannot be controlled properly
Unable to input using the
touch pad
Unable to use the digitizer
function
If you are using an external mouse, ensure that the external mouse has been connected
correctly.
Restart the computer by using the keyboard (Press
, U , and select [Restart] with
R ).
If the computer does not respond to keyboard commands, read “No response”
page 34).
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., IntelliMouse), the touch pad may not be
used.
Has the touch pad driver been properly installed?
Has the Setup Utility been used to set [Digitizer] to [Enable]?
You can use only the pen included with the computer to use the digitizer function.
It is necessary to perform [Calibration] to point correctly with the pen included with the
computer.
Display Rotation
The display is not rotated
automatically by switching
from Laptop mode to Tablet mode, or vice versa
The display fails to rotate
even when the rotation butis pressed
ton
When the screensaver starts
while the display is rotated,
nothing is displayed on the
screen
Confirm that the default angle of each mode is correctly set. (
“Display Rotation”)
Do not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in the
process of switching users with the Fast User Switching function.
Close the applications which are open.
Some screensaver types do not display anything on the screen for the first minute or so.
Try changing the screensaver type.
The Reference Manual is
not displayed
Is Adobe Reader installed?
If you have uninstalled Adobe Reader, install using the following procedures.
1 Select [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then select [OK].
Install Adobe Reader by following the instructions on the screen.
SD Memory Card
Cannot log on with the SD
Memory Card
Windows logon user name and password are not set in the SD Memory Card correctly.
Enter the Windows user name and password without using the SD Memory Card.
After logging on, set the same user name and the password on the SD Memory Card and
Windows, using the following operation.
• Change the setting of the SD Memory Card by [SD Card Setup]. (
“SD Memory
Card Security Function”)
Troubleshooting
Reference Manual
33
Dealing with Problems
(Summary)
Fast User Switching Function
Some applications may not
work properly
When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly.
• Key combinations with Fn may not work.
• It may not be possible to set the settings of the display.
• 
Wireless LAN may not work.
In this case, log off all users without using Fast User Switching function, and try the
operation once more. If the problem persists, restart the computer.
Others
Troubleshooting
No response
34
Press Ctrl + Shift + Esc to open Task Manager and close the software application
which is not responding.
Is there an input screen hidden behind another window? Use Alt + Tab to check for
other windows being displayed.
After shutting down by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
Reinstalling Software
When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on
your hard disk to another media or to an external hard disk before running the reinstallation procedure.
The reinstallation procedure will return the computer to its original condition.
Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost.
(This is not the case when Windows is reinstalled in the first partition.)
• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure.
Before Reinstallation
Preparing
Product Recovery CD-ROM (included)
Panasonic USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)
Important
Before the reinstallation procedure, remove all peripherals (except for the CD/DVD drive).
Be sure the AC adaptor is connected until the reinstallation procedure is completed.
Reinstalling
2 Turn the computer on, and press F2 while [Panasonic]
boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and
then press F9 .
At the confirmation message, select [Yes] and press
Enter .
4 Select [Boot] menu, then select [USB CDD] and press F6
until [USB CDD] is at the top of the [Boot] menu.
5 Place disc number one of the recovery CDs into the CD/
DVD drive.
6 Press F10 .
At the confirmation message, select [Yes] and press
Enter .
The computer will restart, and this screen should appear.
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup
] Enable the Backup function.
0. [ Cancel
] Cancel.
---------------------------------------------------------------------

When the message [The Backup function has been enabled. If [Recovery] or [Erase HDD] is executed, the
Backup function will be disabled, and your Backup data
will be lost.] appears, press Y .
7 Press 1 to execute [1.[Recovery]].
(You can cancel this operation by pressing 0 .)
The License Agreement screen should appear.
8 Press 1 to select [1. Yes, I agree to the provisions above
and wish to continue!].
This screen should appear.
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------Reinstalling : Windows(R) XP Tablet PC Edition
1. Reinstall Windows to the whole HDD to factory default.
2. Make two partitions, for the operating system and data. And reinstall
Windows to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Reinstall Windows to the first partition.
0. Cancel
---------------------------------------------------------------------
9 Make a selection from the menu.
NOTE
When [2] is selected, the hard disk backup function cannot be enabled because the hard disk has
been divided into partitions.
When selecting [2], enter the basic partition size for
the operating system installation and press
Enter .
(The data partition size is the remainder after subtracting the basic partition size.)
To select [3], the initial partition size must be 8 GB or
more of the hard disk size. Reinstallation cannot be performed with a small partition size.
Troubleshooting
1 Turn off the computer and connect the CD/DVD drive to
the USB port.

If you select [1] or [2], the message [The Backup function
has been enabled. If [Recovery] is executed, the Backup
function will be disabled, and your Backup data will be
lost.] appears. In this case, press Y .
If the message [Computer must be rebooted in order to
execute [Recovery].] appears, press R .
35
Reinstalling Software
10 At the confirmation message, press Y .
The operation of reinstallation for the hard disk starts automatically. (The operations take about 30 minutes.)
CAUTION
Do not interrupt the reinstallation procedure before completion, for example by turning off the
computer or pressing Ctrl + Alt + Del , as
this may prevent Windows from starting up, or may
cause data to be lost so that the reinstallation procedure cannot be executed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message [The media does not contain the
correct file] appears, select [OK]. A message will
appear instructing you to insert the next CD.
Confirm that the proper recovery CD has been inserted by opening the cover of the CD/DVD drive
and then close the cover, then select [OK].
After the reinstallation procedure completes, this screen
should appear.
---------------------------------------------------------------[Recovery] is complete.
Windows(R) XP Tablet PC Edition install wizard will start after reboot.
Please remove the Product Recovery CD-ROM.
After tuning off the power, disconnect the CD/DVD-ROM drive, and turn the
power on again.
----------------------------------------------------------------
11 Remove the recovery CD, and then press any key.
The computer will be shut down.
12 Remove the CD/DVD drive.
13 Turn on the computer, and press F2 while [Panasonic]
boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password.
Troubleshooting
14 Press F9 .
At the confirmation message, select [Yes] and press
Enter . (The Setup Utility settings will return to their
default values. Even the security settings with the exception of the password(s) will return to their default values.)
15 Select [Exit] and then select [Save Current Values], then
press Enter .
At the confirmation message, select [Yes] and press
Enter .
16 Turn the computer off by sliding the power switch.
NOTE
If additional instructions are included with the computer, be sure to read them. It may be necessary to
perform additional operations during the following procedures.
17 Perform the first-time use operation (
- page 15 step 8 ).
page 14 step 6
18 Run the Setup Utility and change the settings where
necessary.
36
LIMITED USE LICENSE AGREEMENT
THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT ("PRODUCT")
ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH
THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED
TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
Matsushita Electric Industrial Co., Ltd. ("MEI") has developed or otherwise obtained the Programs and hereby licenses
their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to
achieve your intended results, and for the installation, use and results obtained therefrom.
A.
LICENSE
MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in
accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only
a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts,
designs and ideas represented by or incorporated in the Programs and related documentation, all of which title,
ownership and rights shall remain with MEI or its suppliers.
B.
You may use the Programs only on the single Product which was accompanied by the Programs.
C.
You and your employees and agents are required to protect the confidentiality of the Programs. You may not
distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing
or otherwise, without the prior written consent of MEI.
D.
You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for
any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your
use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or
attempt to modify, the Programs.
E.
You may transfer the Programs and license them to another party only in connection with your transfer of the
single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you
must also transfer all copies, whether in printed or machine readable form, of every Program, and the related
documentation, to the same party or destroy any such copies not so transferred.
F.
You may not remove any copyright, trademark or other notice or product identification from the Programs and you
must reproduce and include any such notice or product identification on any copy of any Program.
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE
THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND
BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,
ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTER
OF THIS AGREEMENT.
About Intel® software products
The enclosed software products and documentation were developed at private expense, and are provided with “RESTRICTED
RIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and
DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of
Intel's proprietary rights in the product.
Appendix
Appendix
TERM
This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate
this license at any time by destroying, at your expense, the Programs and related documentation together with all copies
thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor set
forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such
termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies
thereof in any form.
37
Contrat de licence d'usage limité
Le(s) logiciel(s) (les "Logiciels") fournis avec ce produit Panasonic® (le "Produit") sont exclusivement concédés en
licence à l'utilisateur ultime ("vous"), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions
des présentes.
Matsushita Electric Industrial Co., Ltd. ("MEI") a mis au point ou obtenu les Logiciels et vous en concède l'utilisation par
les présentes. Vous assumez l'entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pour
obtenir les résultats escomptés, ainsi que de l'installation, de l'utilisation et des résultats obtenus.
A.
Licence
MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs d'utiliser les
Logiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir qu'un
droit limité d'utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n'obtenir aucun
droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant ni visà-vis des algorithmes, concepts, dessins, configurations et idées représentés par ou incorporés dans les Logiciels
et la documentation les accompagnant, dont les titres, propriété et droits resteront tous à MEI ou à leurs
propriétaires.
B.
Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.
C.
Vous et vos employés ou agents êtes requis de protéger la confidentialité des Logiciels. Vous ne pouvez ni
distribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d'un tiers, par partage de
temps ou de quelque autre manière que ce soit, sans l'autorisation écrite préalable de MEI.
D.
Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documentation les accompagnant pour quelque fin que ce soit, à l'exception d'une (1) copie des Logiciels à des fins de
sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagné
par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels.
E.
Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu'en rapport avec votre cession
du Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vous
devez céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous les
Logiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.
F.
Vous ne pouvez retirer aucune marque de droits d'auteur, marque ou autre ni aucune identification de produit des
Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies
des Logiciels.
Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs
copies, de façon électronique ou mécanique, en tout ou en partie.
Vous ne pouvez utiliser, copier, modifier, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie, à
l'exception de ce qui est expressément stipulé dans ce contrat.
Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l'exception de ce qui est autorisé au
paragraphe E ci-dessus, votre licence est automatiquement résiliée.
Appendix
Termes, clauses et conditions
Cette licence n'est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d'une résiliation
antérieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentation
les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée, avec
application immédiate, si les conditions de résiliation définies ailleurs dans ce contrat se sont réalisées ou si vous ne
respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez de
détruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme
que ce soit.
38
Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,
clauses et conditions. Vous reconnaissez en outre qu'ils sont la description complète et exclusive du contrat conclu entre
nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre communication
entre nous, relativement à l'objet du présent contrat.
Hard Disk Backup Function
The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk
contents or restore backed up contents to their original locations.
By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from operational
errors or other factors. Also, you can back up or restore hard disk contents using this computer alone, without having to use other
media or peripheral devices.
At the time of purchase, the hard disk backup function is disabled. If you follow the procedure below to create a backup area, the
hard disk backup function will be enabled, and you will be able to back up your data. Note, that once the backup function has been
page 35).
enabled, you will have to perform the reinstallation procedure to disable it again (
The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when the data is
backed up or restored. Note that if an error occurs while data is being restored, whether as a result of an unexpected malfunction,
incorrect operation, or other reason, the data in the hard disk (data before restoration) may be lost.
Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss of data)
as a result of the use of this function.
Preparing
Product Recovery CD-ROM (included)
Panasonic USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)
Disconnect or remove all peripheral devices (except for the CD/DVD drive) and SD Memory
Cards, as the backup area may not be created properly while these devices are connected.
Be sure the AC adaptor is connected to the computer.
A backup area cannot be created if the hard disk is already divided into several partitions. Return
the computer to its condition at the time of purchase (one partition only), and create the backup
area.
To divide the partition, make the selection when the backup area is created (
page 40 step 8).
If the partition configuration is changed (partitions created, size changed, etc.) after the backup
area has been created, it will no longer be possible to execute the backup function. To change the
configuration, it is necessary to return the computer to its condition at the time of purchase, and
then create the backup area again.
The hard disk backup function will only work for the internal hard disk. This function does not
work with an external hard disk.
Backup and restore functions will not operate if the hard disk has been damaged.
Do not use the NTFS file system compression function, as this may result in insufficient capacity
of the backup area.
If the hard disk malfunctions, it will be impossible to read the data stored on it. We recommend
that you also back up important data to a location other than the hard disk (an external hard disk
or other media).
Execute a disk error check using the following procedure.
1 Select [start] - [My Computer], right-click [Local Disk(C:)] and select [Properties].
2 Select [Check Now] from [Tools].
3 In [Check Disk], select [Start] without adding a check mark beside any of the items.
If a message is displayed indicating that there is an error in the disk, display [Check Disk], and
add a check mark for [Automatically fix file system errors] and [Scan for and attempt recovery
of bad sectors], select [Start], and check for disk errors again.
The hard disk backup function does not accommodate dynamic disks. Do not convert the hard
disk to a dynamic disk.
Appendix
Appendix
Before Using a Hard Disk Backup Function
39
Hard Disk Backup Function
NOTE
Regarding backup area
• Requires availability of at least half of the entire hard disk. Without sufficient space
available, the backup area cannot be created.
• When the backup area is created, the usable hard disk capacity will be reduced to less
than half.
• The backup area cannot be accessed from Windows. For this reason, backed up data
cannot be copied to CD-R or other removable disk media.
• When the hard disk backup function is executed, data in the backup area will be overwritten. If newly created or edited data is backed up later, data stored previously
in the backup area will be lost.
Create a Backup Area
1 Turn off the computer and connect the CD/DVD drive to the USB port.
2 Turn on the computer, and press F2 while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password. You cannot register [Boot] menu
with a User Password.
3 Select [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at the top of
the [Boot] menu.
4 Place disc number one of the recovery CDs into the CD/DVD drive.
5 Press F10 .
At the confirmation message, select [Yes] and press Enter .
The computer will restart. If [Enter Password] is displayed during the following procedures,
input the Supervisor Password or the User Password.
This screen should appear.
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup
] Enable the Backup function.
0. [ Cancel
] Cancel.
---------------------------------------------------------------------
6 Press 3 to execute [3.[Backup]].
CAUTION
When dividing the hard disk into partitions
Do not execute [1. [Recovery]] to divide the hard disk into partitions. The hard disk
backup function cannot be enabled after the hard disk has been partitioned. Use procedure 8 to divide the hard disk.
7 At the confirmation message, press Y .
8 Select how to divide the hard disk from the menu.

Select [1].
[At the time of purchase]
[After the backup area is created]
Appendix
The usable hard disk area
40
Can be accessed from
Windows (One partition).
The backup area
Cannot be accessed
from Windows.

Select [2], enter the partition size (GB), and press Enter .
• You can cancel this operation by pressing 0 .
• The data partition size will be the maximum settable size less the number entered above.
The maximum settable size will differ depending on models.
[At the time of purchase]
[After the backup area is created]
The usable hard disk area
Can be accessed from
Windows (Two partitions).
The backup area
Cannot be accessed
from Windows.
9 At the confirmation message, press Y .
The backup area is then created.
10 When the message [You must reboot in order to enable the Backup function] appears, remove
the recovery CD, and press any key to restart the computer. The computer is restarted, then the
backup process will begin.
11 When the message [[Backup] is complete] appears, press Ctrl + Alt + Del to restart
the computer.
CAUTION
Do not press Ctrl + Alt + Del until the message is displayed.
12 After logging on to Windows, a message will appear advising that a new device has been installed and that the computer must be restarted to enable the settings. Select [Yes] to restart the
computer.
NOTE
The [Boot] menu in the Setup Utility is set to start up from the CD/DVD drive. Change this
setting if necessary.
The next time the backup or restore functions are executed, follow the procedure for “Backing
Up and Restoring Data” (
below).
Backing Up and Restoring Data
CAUTION
1 Turn the computer on, and press F2 while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password or the User Password.
2 Select [Exit] menu, then select [Hard Disk Backup / Restore] and press Enter .
At the confirmation message, select [Yes] and press Enter .
Appendix
Appendix
Before executing the backup function, execute a disk error check. (
page 39)
Do not interrupt the backup or restore functions before completion, for example by turning
off the power or pressing Ctrl + Alt + Del , as this may prevent Windows from
starting up, or may cause data to be lost so that the backup and restore functions cannot be
executed.
41
Hard Disk Backup Function
3 Select the operation to be executed from the menu.

1 Press 1 to execute [1. [Backup]].
(When dividing the hard disk into two partitions, select the backup method at next screen.)
2 At the confirmation message, press Y .
The backup process will begin.

1 Press 2 to execute [2. [Restore]].
(When data is backed up in two partitions, select the restore method at next screen.)
2 At the confirmation message, press Y .
The restore process will begin.
NOTE
The time required to complete the backup or restore process differs depending on the
data volume.
4 When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press
Ctrl + Alt + Del to restart the computer.
• If the backup or restore process was interrupted before completion, for example if the power
was turned off, execute the process again.
• After logging on to Windows, when a new device is installed and a message appears advising
that the computer must be restarted to enable the settings, select [Yes] to restart the computer.
CAUTION
When the hard disk backup function has been enabled, the backed up data will not be erased
even if a commercial data erasing utility or similar software is used to erase all data from useraccessible area. To erase all data on the hard disk, including backed up data, use a commercial
data erasing utility after disabling the hard disk backup function following the procedure bepage 43).
low, or use the hard disk data erase utility included in this computer (
Occasionally, the message [#1805 cannot write image file] will be displayed, and the backup
function will be interrupted. If this error occurs, execute the backup function again. After
this, if the backup function is completed properly, then there is no problem in the hard disk.
Appendix
To disable the hard disk backup function
Perform the reinstallation procedure. All data in the backup area and the hard disk will be erased.
Conduct steps 1-8 for “Reinstalling Software” (
page 35). Select [1] or [2] to execute the
reinstallation at the screen for executing the reinstallation.
• When [1] is selected, the hard disk backup function will be disabled.
• When [2] is selected, the hard disk backup function will be disabled, but in this case, because
the hard disk has been divided into partitions, the hard disk backup function cannot be
re-enabled (
page 28).
• When [3] is selected, the hard disk backup function cannot be disabled.
42
Hard Disk Data Erase Utility
This computer is equipped with a utility for erasing hard disk data.
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk
data by following the steps below.
The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that
has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that
specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as
a result of the use of this utility.
Preparing
Product Recovery CD-ROM (included)
Panasonic USB CD/DVD drive (optional: USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)
NOTE
Be sure the AC adaptor is connected until the procedure is completed.
This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks.
This utility cannot erase data from damaged disk.
This utility cannot erase data for specific partitions.
After executing this utility, the computer cannot be booted from the hard disk.
The backup area and the data in the backup area will be erased.
Procedure
2 Turn the computer on, and press F2 while [Panasonic]
boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password.
3 Select [Boot] menu, then select [USB CDD] and press F6
until [USB CDD] is at the top of the [Boot] menu.
4 Place disc number one of the recovery CDs into the CD/
DVD drive.
5 Press F10 . At the confirmation message, select [Yes]
and press Enter .
The computer will restart, and this screen should appear.
--------------------------------------------------------------------Select a number
--------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup
] Enable the Backup function.
0. [ Cancel
] Cancel.
---------------------------------------------------------------------

When the message [The Backup function has been enabled.
If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.]
appears, press Y .
6 Press 2 to execute [2. [Erase HDD]].
(You can cancel this operation by pressing 0 .)

When the message [The Backup function has been enabled.
If [Erase HDD] is executed, the Backup function will be
disabled, and your Backup data will be lost.] appears, press
Y .
When the message [Computer must be rebooted in order to
execute [Erase HDD].] appears, press R .
7 At the confirmation message, press Y .
8 When [<<>>] is displayed, press Enter .
9 The approximate time required for erasing data will be displayed.
Press Space .
10 At the confirmation message, press Enter .
The operation of erasing the hard disk will start.
(If necessary, the “hard disk data erase” operation can be
cancelled after it has begun by pressing Ctrl + C .
If the operation is cancelled before being completed, a part
of the data will not be erased.)
11 After the operation is complete:
Under normal conditions, the message [Hard disk data has
been deleted.] will be displayed.
If a problem occurred during the operation, an error message
will be displayed.
12 Remove the recovery CD, and then press any key to turn off
the computer.
Appendix
Appendix
1 Turn off the computer and connect the CD/DVD drive to the
USB port.
13 Remove the CD/DVD drive.
43
Specifications
This page provides the specifications for the basic model CF-18KDHZXVM/CF-18KDHZBVM. The model number will change
depending on the configuration of the unit, such as, CPU speed, memory size, HDD size, Operating System, LCD type, and whether
a wireless LAN or Bluetooth® is built in or not.
To check the model number:
Check the bottom of the computer or the box the computer came in at the time of purchase.
To check CPU speed, memory size and the hard disk drive (HDD) size:
“Setup Utility”).
Run the Setup Utility (
Confirm the required information by checking the following items.
• [Information] menu
CPU speed: [CPU Speed]
Memory size: [System Memory]
Hard disk drive size: [Primary Master]
• [Advanced] menu
Wireless LAN: [Wireless LAN] is displayed only if a wireless LAN is built in.
Main Specifications
Appendix
Model No.
CPU
Memory
Video Memory
LCD
Type
Displayed Colors*3
External Display
Hard Disk Drive
Keyboard
Pointing Device
44
PC Card Slot
Allowable current (total for two slots)
RAM Module Slot*6
SD Memory Card Slot*7
Microphone Jack*8
Interface
Headphone Jack
USB Port
Modem
LAN
Wireless LAN
Bluetooth®
Expansion Bus Connector
External Display Port
External Antenna Connector
Sound
Battery Pack
Operating Time*10
Charging Time*10
Power On
Power Off
Clock Battery
AC Adaptor*13
Power Consumption*14
Environment Operation Temperature
Humidity
Storage Temperature
Humidity
Physical Dimensions*16 (W X H X D)
Weight*16
CF-18KDHZXVM
CF-18KDHZBVM
Intel® Pentium® M Processor 753 (1.2 GHz, 2 MB*1 L2 cache, 400 MHz FSB)
512 MB*1 (1536 MB*1 Max.)
UMA (128 MB*1 Max.)*2
10.4 type (TFT)
65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots)
65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots/1280 x 1024 dots)*4
60 GB*5
Windows keyboard (82 keys)
Touch Pad
Digitizer (Anti-Reflection)
Two Type I or Type II, or one Type III
3.3 V: 400 mA, 5 V: 400 mA
200-pin, 1.8 V, SO-DIMM, DDR2-SDRAM, PC2-3200 Compliant
SD Memory Card
Miniature jack, 3.5 DIA
Miniature jack, 3.5 DIA
4-pin x 2, USB2.0
RJ-11 Data: 56 kbps (V.92 & K56flex*9) FAX: 14.4 kbps
RJ 45 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Built-in Intel® PRO/Wireless 2915 ABG (
page 45)
Built-in (
page 45)
Dedicated 100-pin female
Mini Dsub 15-pin female
Dedicated 50 Ω coaxial connector x 2
WAVE and MIDI playback, Monaural Speaker (built in)
Li-ion 7.4 V, 7.65 Ah
Approx. 4.5 hours - 8.5 hours*11 (Approx. 6.5 hours*12)
Approx. 7 hours
Approx. 4 hours
Coin type lithium battery 3.0 V
Input: 100 V - 240 V AC, 50 Hz / 60 Hz
Output: 16.0 V DC, 2.5 A
Approx. 26 W*15 / Approx. 40 W (maximum when recharging in the ON state)
5 °C to 35 °C {41 °F to 95 °F}
30% to 80% RH (No condensation)
-20 °C to 60 °C {-4 °F to 140 °F}
30% to 90% RH (No condensation)
271 mm X 49 mm X 216 mm {10.7 " X 1.93 " X 8.5 "}
Approx. 2.1 kg {Approx. 4.5 lb.}
*1 1 MB = 1,048,576 bytes
*2 A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video Memory cannot
be set by the user.
*3 A 16,777,216 color display is achieved by using the dithering function.
*4 Maximum resolution depends on the specifications of the external display.
*5 1GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.
*6 A PC2-3200-compliant or PC2-4200-compliant RAM module can be added. A PC2-4200-compliant RAM module added to this computer,
operates at the same speed as a PC2-3200-compliant RAM module.
*7 This slot does not support the MultiMedia card.
Operation has been confirmed for Panasonic SD Memory Cards with up to 1 GB capacity.
*8 Use only a monaural condenser microphone.
*9 The settings for the K56flex modem need to be changed according to the AT command.
*10 Varies depending on the usage conditions, CPU speed, etc.
*11 Measured using BatteryMarkTM Version 4.0.1 (LCD brightness: Maximum - Minimum)
*12 Measured using MobileMarkTM 2002 (LCD brightness: 60 cd/m )
13
* 
The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compatible AC cord.
*14 Approx. 1.0 W when the battery pack is fully charged (or not being charged) and the computer is off.
Approx. 1.5 W when the Wake up from LAN function has been enabled.
*15 Rated power consumption.
*16 The dimensions and weight do not include the hand strap.
Wireless LAN (only for models with wireless LAN)
Data transfer rates*17
Standards supported
Transmission method
Wireless channels used
RF frequency band
IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)
IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)
IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)
IEEE802.11a/IEEE802.11b/IEEE802.11g
OFDM system, DS-SS system
IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165
IEEE802.11b/IEEE802.11g: Channels 1 to 11
IEEE802.11a: 5.18~5.32 GHz, 5.745~5.825 GHz
IEEE802.11b/IEEE802.11g: 2412~2462 MHz
*17 These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.
Bluetooth®
Bluetooth Version
Transmission Method
Wireless Channels Used
RF Frequency Band
1.2
FHSS system
Channels 1 to 79
2.402-2.48 GHz
Software
Operating System
Utility Programs
Only for models with wireless LAN.
The Product Recovery CD-ROM is required.
Only for models with wireless LAN and/or Bluetooth.
Only for models with Bluetooth.
Appendix
Appendix
*18
*19
*20
*21
Microsoft® Windows® XP Tablet PC Edition 2005
Setup Utility
SD Utility
DMI Viewer
Icon Enlarger
Microsoft® Windows® Media Player 10
Loupe Utility
Adobe Reader
Hotkey Settings
Intel® PROSet/Wireless Software*18
Battery Recalibration Utility
Display Rotation Tool
Wireless LAN Switch*18
Wireless Switch Utility*20
PC Information Viewer
Bluetooth Switch*21
Hard Disk Backup Utility*19
19
Hard Disk Data Erase Utility*
45
LIMITED WARRANTY
For U.S.A.
PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY
Panasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate
warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in
materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are
covered for a period of one (1) year from the date of purchase.
This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before
warranty performance is rendered.
This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs
in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction
of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or
service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.
Limits and Exclusions:
There are no other express warranties except as listed below.
PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY
PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product
develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your
satisfaction, then write to the Consumer Affairs Division at the address indicated below.
SOFTWARE LIMITED WARRANTY
Panasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs are
furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof
to you, as evidenced by your purchase receipt.
This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your
requirements or that the operation of the Programs will be uninterrupted or error free.
Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective
disk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid
warranty period.
Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which
the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media
otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse,
neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is
attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or
attempted to modify any Program.
DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.
PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,
ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF
USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.
Appendix
46
To obtain service or technical assistance within the continental U.S.A. and Alaska.
DIAL TOLL FREE: 1-800-LAPTOP5
Correspondence requesting product information should be sent to:
Panasonic Computer Solutions Company
50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094
For Canada
PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY
Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when
purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms
set forth below, during the period of warranty coverage specified.
Scope of Coverage
Period of Coverage
Type of Failure Coverage
Whole Product (except Batteries), AC adaptor and CD-ROM
(if factory installed)
Three (3) Years from Date of Original
End User Customer Purchase
Defective Materials or Workmanship
Batteries, CD-ROM (unless factory installed), Port Replicator,
Extra Memory Modules and all other Peripherals, Options and
Accessories
One (1) Year from Date of Original End
User Customer Purchase
Defective Materials or Workmanship
Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the nature of the defect
claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtain
service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by
this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is
subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage.
No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects
in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign
matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.
IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE
Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability
is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier.
SOFTWARE MEDIA LIMITED WARRANTY
Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s)
is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt
as evidenced by your purchase receipt for your Panasonic Computer product.
THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to
the software licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.
Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it,
transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together
with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.
Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It
does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other
claims, whether or not of similar character.
No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted
modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or
removable storage media.
GENERAL
NO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE,
SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.
IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE
COMPUTER PRODUCT.
NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION
AROSE.
Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.
Appendix
Appendix
NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE
COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.
47
As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. has
determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
Outline of the International ENERGY STAR® Office Equipment Program
The international ENERGY STAR® Office Equipment Program is an international program
that promotes energy saving through the use of computers and other office equipment.
The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors
can participate voluntarily. The targeted products are office equipment such as computers,
displays, printers, facsimiles, and copiers. Their standards and logos are uniform among
participating nations.
Panasonic Computer Solutions Company
Panasonic Canada Inc.
50 Meadowlands Parkway, Panazip 2F-5,
5770 Ambler Drive Mississauga,
Secaucus, NJ 07094
Ontario L4W 2T3
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Japan
FJ0805-0
DFQX5562ZA

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Create Date                     : 2005:08:19 08:02:40Z
Modify Date                     : 2005:08:19 17:18:28+09:00
Subject                         : DFQX5562ZA
Page Count                      : 48
Creation Date                   : 2005:08:19 08:02:40Z
Mod Date                        : 2005:08:19 17:18:28+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Matsushita Electric Industrial Co., Ltd.
Metadata Date                   : 2005:08:19 17:18:28+09:00
Creator                         : Matsushita Electric Industrial Co., Ltd.
Title                           : Operating Instructions
Description                     : DFQX5562ZA

EXIF Metadata provided by EXIF.tools