Panasonic of North America 9TGCF-P12 CF-P1 Personal Computer with WLAN+BT+GPRS User Manual Bluetooth

Panasonic Corporation of North America CF-P1 Personal Computer with WLAN+BT+GPRS Bluetooth

User Manual Bluetooth

®Using a BluetoothENGLISHENGLISHSUPPLEMENTARY INSTRUCTIONSThe Setup WizardStarting My Wirefree NetworkDevice DiscoverySerial PortsSpecifications
2Supplementary InstructionsInformation to the UserThis product and your HealthThis product, like other radio devices, emits radio frequency electromagnetic energy. Thelevel of energy emitted by this product however is far much less than the electromagneticenergy emitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found in radio frequency safety stan-dards and recommendations, we believe this product is safe for use by consumers. Thesestandards and recommendations reflect the consensus of the scientific community and resultfrom deliberations of panels and committees of scientists who continually review and inter-pret the extensive research literature.In some situations or environments, the use of this product may be restricted by the proprietorof the building or responsible representatives of the organization. These situations may forexample include:Using this product on board of airplanes, orIn any other environment where the risk of interference to other devices or services isperceived or identified as harmful.If you are uncertain of the policy that applies on the use of wireless devices in a specificorganization or environment (e.g. airports), you are encouraged to ask for authorization touse this product prior to turning on the product.Regulatory InformationWe are not responsible for any radio or television interference caused by unauthorized modi-fication of this product. The correction of interference caused by such unauthorized modifi-cation will be the responsibility of the user. We and its authorized resellers or distributors arenot liable for damage or violation of government regulations that may arise from failing tocomply with these guidelines.This Supplementary Instructions explains how to getstarted with a Bluetooth and point out cases where theoperation of the computer will differ from that in theOperating Instructions.BluetoothAntennaBluetooth communications are done via an antenna. Do not shield this antenna with thehand, etc. This will negatively effect the performance of your Bluetooth communications.NOTE
3ENGLISHRead Me First - For U.S.A.Replace as follows.Federal Communications Commission Radio Frequency InterferenceStatementNote: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.Consult the Panasonic Service Center or an experienced radio/TV technician for help.Safety NoticeDo not touch or move antenna while the unit is transmitting or receiving.Do not hold any component containing the radio such that the antenna is very close ortouching any exposed parts of the body, especially the face or eyes, while transmitting.Do not operate a portable transmitter near unshielded blasting caps or in an explosiveenvironment unless it is type especially qualified for such use.WarningTo assure continued compliance, use only shielded interface cables when connecting to acomputer or peripheral. Also, any changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authority to operate this equipment.FCC Radiation Exposure Statement:• This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.• This equipment must be installed and operated in accordance with provided instructionsand minimum 1.5 cm spacing must be provided between antenna and all person’s body(excluding extremities of hands, wrist and feet) during wireless modes of operation.• This equipment may use multiple installed transmitters, which may be capable of simulta-neous transmission.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may causeundesired operation.Responsible Party: Matsushita Electric Corporation of AmericaOne Panasonic WaySecaucus, NJ 07094Tel No:1-800-LAPTOP-5 (1-800-527-8675)
Page 7My Wirefree Network Copyright 2003 Rappore Consulting, Inc.Setup: WelcomeMy Wirefree Network assigns PDA as the default name. This is the name by whichyour PDA will be known to other devices.A personal device passkey is used during bonding or connections for securitypurposes. The default is to not set a personal device passkey. A personal devicepasskey is only recommended when advanced security is enabled.The Setup Wizard guides you through each step necessary to configure your devicefor connectivity.To personalize your device settings:1. Enter a device name.2. If you want to have a personal device passkey,enter the same value in Passkey and ConfirmPasskey.3. Tap Next.The Setup Wizard
Page 8 My Wirefree NetworkCopyright 2003 Rappore Consulting, Inc.Setup: Hardware TestThe hardware test initializes and tests theBluetooth radio. It ensures that the My WirefreeNetwork software can communicate with theBluetooth radio. The test does not take very long.However, you can skip this test and continue withthe setup wizard.1. Tap Test.An unsuccessful hardware test may mean yourBluetooth radio is not functioning properly. Referto your device documentation to verify that theradio is properly installed. If the Bluetooth radio isa CF or other removable card, verify that the cardis inserted properly. Verify that the power switchfor builtin Bluetooth modules is in the ONposition.
Page 9My Wirefree Network Copyright 2003 Rappore Consulting, Inc.Setup: My ServicesAll services that can be accessed or shared by your device can be enabled or disablednow in the Setup Wizard or later from the My Services screen.• Access services. Enable your device to see and use services on a remote device.• Share services. Enable your device to provide services that other devices can seeand access.The following services can be enabled or disabled:• Access Audio Gateway*.• Access Business Cards*.• Access Calendars*.• Access Email.• Access Files*.• Access Notes.• Access Serial Ports*.• Access the Internet*.• Network Type ActiveSync.• Serial Port Type ActiveSync*.• Share Business Cards*.• Share Files*.• Share Serial Ports.(*These services are enabled by default.) Each enabled service is displayed on the PDA screen with a check in its box.After enabling or disabling services, tap Next.
Page 10 My Wirefree NetworkCopyright 2003 Rappore Consulting, Inc.Setup: My Shared FoldersTo make the files and subfolders available for othersto use, a folder must be shared. By default, you willnot have a shared folder when you start MyWirefree Network.If you do not want to share any folders, Tap No andskip to the next section.If you want to share a folder, Tap Yes.If you type yes, the Properties for Shared Folderdisplays.Type the Share Name which will be seen by remoteusers. By default it is named New Shared Folder.Type an existing Folder’s full path. The defaultvalue is \My Documents.Tap OK to exit shared folder properties.
Page 11My Wirefree Network Copyright 2003 Rappore Consulting, Inc.Tap Add to add another shared folder or tap Next tocontinue.
Page 12 My Wirefree NetworkCopyright 2003 Rappore Consulting, Inc.Setup: My Business CardsThis configuration option will display if you havecontacts in the Contacts program. Each contact willbe displayed with a check box. You will need toenter your own contact information into theContacts program.1. Tap the business card or cards that you desiresent to remote devices when a remote devicerequests your business card.2. Tap Next.Setup: Complete!This screen displays when you have successfullyconfigured My Wirefree Network.1. Tap Finish.My Wirefree Network is ready for use. Turn to thenext page for further instructions on Starting MyWirefree Network.
Page 13My Wirefree Network Copyright 2003 Rappore Consulting, Inc.Starting My Wirefree NetworkThere are two ways tostart My WirefreeNetwork. If MyWirefree Networkappears in the Startmenu:1. Tap Start.2. Tap My WirefreeNetworkOtherwise, if MyWirefree Network doesnot appear when youtap Start,2. Tap Programs.3. Then tap MyWirefree Networkfrom the displayedicons.
Page 16 My Wirefree NetworkCopyright 2003 Rappore Consulting, Inc.The My Wirefree Network program has two main components:Device DiscoveryDevices locates and lists other Bluetooth wirelessdevices by address or name, so that you can accessthe wireless devices and use the services theyprovide. The Devices screen is the first screendisplayed by My Wirefree Network as it starts.My Device aids you in configuring your own deviceand the resources that you choose to share withother wireless devices.
Page 51My Wirefree Network Copyright 2003 Rappore Consulting, Inc.Serial Port (SPP) on Remote DeviceThe Serial Port service emulates an RS232 (orsimilar) serial cable. The service name will usuallyidentify the serial port assigned by the remotedevice.Tap Serial Port.A connection is established to the identified serialport for application use.Serial Ports
Page 52 My Wirefree NetworkCopyright 2003 Rappore Consulting, Inc.Share Serial PortsA shared serial port must be added before a Serial Port service can be displayed toremote users. The Shared Serial Port list also displays those serial ports (SER# andCOM#) created by using remote serial device services.Add a Serial PortFrom the Devices screen, tap My Device.Tap My Services.If the checkbox in front of Share Serial Ports is notchecked, tap it to make a check appear.Tap Share Serial Ports.
Page 53My Wirefree Network Copyright 2003 Rappore Consulting, Inc.Tap Add.A serial port is established.Serial Port (COM#) is the name format used for thelist.
Page 54 My Wirefree NetworkCopyright 2003 Rappore Consulting, Inc.Remove a Serial PortThe serial port is removed from the list.Note: Depending on the PDA configuration,typically only 4 COM ports are available forapplication use.Tap on the serial port you wish to remove.Tap Remove.
SpecificationsTransmission methodWireless channels usedRF frequency bandFHSS systemChannels 1 to 792402-2480 MHz

Navigation menu