Panasonic of North America 9TGWLM-1 User Manual p12 pm6

Panasonic Corporation of North America p12 pm6

Manual

18Getting Started3Select [AdHoc].The following screen is displayed.<Wireless display screen>Change setting on host PC to the followingvalue, reboot the host PC, then select"Connect" below.Wireless LAN cardNetwork Type : AdHocSSID : cfvdw07-43411Encryption : disableTCP/IPIP Address : 10.57.148.205NetMask : 255.0.0.0MeiWDSPassword : wdspConnect CancelFirst-time OperationCAUTIONDo not select [Connect] until step 9 is completed.This screen is a sample.11 Setup the wireless display1Set the battery pack in the wireless display.2Connect the wireless display to a power outlet andturn the wireless display on.The following screen is displayed.<Wireless display screen>Select network type.AdHoc Infrastructure CancelTo the computer( Page 14)Be sure to insert the battery pack as illustrated.CAUTIONTabconnector
19Getting Started4Select on the taskbar of the external display, then select [Configuration]The following screen is displayed.<External display screen>Match the settings of the computerwith the information displayed on<Wireless display screen> of thestep 3 .If there is no input from a key or an external mouse for a certain interval oftime, the power to the wireless display may be turned off automatically. In thiscase, turn on the wireless display and then start the procedure from step 3 .NOTE5Select [Apply Changes], then select [OK].6Select [Start] - [Settings] - [Control Panel] - [Network] - [TCP/IP PRISM2IEEE 802.11 PC CARD Adapter] - [Properties] - [IP Address].The following screen is displayed.This screen is a sample.<External display screen>Match the settings of the computerwith the information displayed on<Wireless display screen> of thestep 3 .7Select [OK], then select [OK].8Restart the computer.9Select [Connect] on <Wireless display screen> of the step 3 .This screen is a sample.Set to [802.11.AdHoc].
20Getting Started14Set the necessary items, select [Next].The following screen is displayed.<Step 2>13Input [wdsp], then select [OK].The following screen is displayed.<Step 1>First-time Operation12Select on the taskbar, select [Run Setup Utility].The following screen is displayed.<When using except default settings><External display screen>11Input [wdsp], then select [OK].The wireless display can be used.This screen is a sample.10Select on the taskbar, select [Password]:The following screen is displayed.This screen is a sample.
21Getting Started15Select on the taskbar, set the parameters in [Wireless LAN].Ignore although you attempt a reconnection on the wireless display side and areunsuccessful.16Select on the taskbar, select [Password].Set the password by following <Step 2> screen.17Select [Next] at the <Step 2> screen.The following screen is displayed.18Select [Start] - [Settings] - [Control Panel] - [Network] - [TCP/IP PRISM2IEEE 802.11 PC CARD Adapter], set the parameters by following the above<Step 3> screen, then select [OK].Ignore although you attempt a reconnection on the wireless display side and areunsuccessful.19Restart the computer.<Step 3>This screen is a sample.

Navigation menu