Panasonic of North America 9TGWLM-1 User Manual p12 pm6

Download:
Mirror Download [FCC.gov]
Document ID	168826
Application ID	ngkA+sTMvzMLOhGsP3aadA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.85kB (623183 bits)
Date Submitted	2001-09-11 00:00:00
Date Available	2001-11-28 00:00:00
Creation Date	2001-08-27 15:10:02
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-08-27 15:10:03
Document Title	p12-.pm6
Document Creator	PageMaker 6.0J
Document Author:	takenaka

First-time Operation
11
Setup the wireless display
1 Set the battery pack in the wireless display.
Getting Started
connector
Tab
CAUTION
Be sure to insert the battery pack as illustrated.
2 Connect the wireless display to a power outlet and
turn the wireless display on.
The following screen is displayed.
To the computer
( Page 14)

Select network type.
AdHoc
Infrastructure
Cancel
3 Select [AdHoc].
The following screen is displayed.

Change setting on host PC to the following
value, reboot the host PC, then select
"Connect" below.
Wireless LAN card
Network Type :
SSID :
Encryption :
TCP/IP
IP Address :
NetMask :
MeiWDS
Password :
AdHoc
cfvdw07-43411
disable
10.57.148.205
255.0.0.0
wdsp
Connect
Cancel
This screen is a sample.
CAUTION
Do not select [Connect] until step 9 is completed.
18
4 Select
on the taskbar of the external display, then select [Configuration]
The following screen is displayed.

Match the settings of the computer
with the information displayed on
 of the
step 3 .
Getting Started
Set to [802.11.AdHoc].
This screen is a sample.
NOTE
If there is no input from a key or an external mouse for a certain interval of
time, the power to the wireless display may be turned off automatically. In this
case, turn on the wireless display and then start the procedure from step 3 .
5 Select [Apply Changes], then select [OK].
6 Select [Start] - [Settings] - [Control Panel] - [Network] - [TCP/IP PRISM2
IEEE 802.11 PC CARD Adapter] - [Properties] - [IP Address].
The following screen is displayed.

Match the settings of the computer
with the information displayed on
 of the
step 3 .
This screen is a sample.
7 Select [OK], then select [OK].
8 Restart the computer.
9 Select [Connect] on  of the step 3 .
19
First-time Operation
10 Select
on the taskbar, select [Password]:
The following screen is displayed.
Getting Started
11 Input [wdsp], then select [OK].
The wireless display can be used.

12 Select
on the taskbar, select [Run Setup Utility].
The following screen is displayed.

13 Input [wdsp], then select [OK].
The following screen is displayed.

This screen is a sample.
14 Set the necessary items, select [Next].
The following screen is displayed.

This screen is a sample.
20
15 Select
on the taskbar, set the parameters in [Wireless LAN].
Ignore although you attempt a reconnection on the wireless display side and are
unsuccessful.
16 Select
on the taskbar, select [Password].
Set the password by following  screen.
The following screen is displayed.

Getting Started
17 Select [Next] at the  screen.
This screen is a sample.
18 Select [Start] - [Settings] - [Control Panel] - [Network] - [TCP/IP PRISM2
IEEE 802.11 PC CARD Adapter], set the parameters by following the above
 screen, then select [OK].
Ignore although you attempt a reconnection on the wireless display side and are
unsuccessful.
19 Restart the computer.
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:08:27 15:10:02
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : takenaka
Creator                         : PageMaker 6.0J
Title                           : p12-.pm6
Modify Date                     : 2001:08:27 15:10:03+09:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools