Panasonic of North America LB-SC9 Data Archiver User Manual Users manual

Panasonic Corporation of North America Data Archiver Users manual

Users manual

Download: Panasonic of North America LB-SC9 Data Archiver User Manual Users manual
Mirror Download [FCC.gov]Panasonic of North America LB-SC9 Data Archiver User Manual Users manual
Document ID2655027
Application IDd0YQfG5QfPhi0NXQrODCgw==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize43.15kB (539413 bits)
Date Submitted2015-06-23 00:00:00
Date Available2015-11-06 00:00:00
Creation Date2015-05-08 13:20:42
Producing SoftwareGPL Ghostscript 9.07; modified using iTextSharp™ 5.4.2 ©2000-2012 1T3XT BVBA (AGPL-version)
Document Lastmod2015-06-23 08:43:30
Document TitleUsers manual
Document CreatorCubePDF

-The application product(LB-SC9) is the unit used in the system.
-This manual is the excerpt of only portions related to the application of the manual of whole system.
/%6&647ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸱᭶㸯㸯᪥ࠉỈ᭙᪥ࠉ༗ᚋ㸯᫬㸯㸷ศ
Thank you for purchasing this product.
Please read these instructions carefully before using this
product, and save this manual for future use.
Precautions
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
p Do not expose this unit to rain, moisture, dripping or
splashing.
p Do not place objects filled with liquids, such as vases, on this
unit.
p Use only the recommended accessories.
p Do not remove covers.
p Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
AC cable
p The socket outlet shall be installed near the equipment and
shall be easily accessible.
p Do not use any other AC cables except the supplied one.
USB cable
p Do not use any other USB cables except the supplied one.
CAUTION
Unit
p This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
p This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
p Use the supplied pedestal in vertical installation.
p The unit is in the standby condition when the AC adaptor is
connected. The primary circuit is always “live” as long as the
AC adaptor is connected to an electrical outlet.
p Do not place sources of naked flames, such as lighted
candles, on this unit.
Placement
To reduce the risk of fire, electric shock or product damage,
p Do not install or place this unit in a bookcase, built-in cabinet
or in another confined space. Ensure this unit is well
ventilated.
p Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
(2)
SQT0471
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded
interface cables with ferrite core when connecting to computer
or peripheral devices. Any changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: LB-SC9
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact:
http://xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Conforms to UL STD 60950-1.
AC adaptor
This AC adaptor operates on AC between 100V and 240V.
But
p In the U.S.A. and Canada, the AC adaptor must be
connected to a 120V AC power supply only.
p When connecting to an AC supply outside of the U.S.A. or
Canada, use a plug adaptor to suit the AC outlet
configuration.
p When connecting to a supply of greater than AC 125V,
ensure the cord you use is suited to the voltage of the AC
supply and the rated current of the AC adaptor.
p Contact an electrical parts distributor for assistance in
selecting a suitable AC plug adaptor or AC cord set.
p Do not use any other AC adaptors except the supplied one.
USB cable
p Be sure to check the orientation of the connector before
connecting the USB port. Carefully insert the connector all
the way in until it is firmly in place.
Product identification marking
Product
Location
DATA ARCHIVER
Back
AC Adaptor
Bottom
Operating the PC
Set up and management of magazine
Drive information
Magazine information
Display unit configuration information.
Display magazine information.
1 Right-click the Drive icon of the unit.
1 Right-click the Drive icon of the unit.
2 Select “Utility”  “Properties” from the menu.
2 Select “Utility”  “Properties” from the menu.
3 Select the “Drive information” tab on the
3 Select the “Magazine information” tab on the
displayed screen.
displayed screen.
≥ The following information on the unit will be
≥ The following information on the magazine will be
shown.
shown.
` Model name
` Magazine type
Displays the model name of the unit.
Displays the disc type inside of magazine and
the capacity.
` Serial No.
` Serial No.
Displays the serial number of the unit.
Displays the serial number of the magazine.
` Firmware version
` Write-protect
Displays the current firmware version of the
unit.
Allows you to confirm the write-protect switch’s
condition of the magazine. (> 9)
“Write-enabled” of the write-protect switch’s
condition shows as “OFF”, “Write-disabled”
shows as “ON”.
∫ Version Information
Display the current driver software version.
1 Right-click the Drive icon of the unit.
2 Select “Utility”  “Version Information” from the
menu.
≥ The current driver software version will be shown.
24

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : 
Create Date                     : 2015:05:08 13:20:42+09:00
Modify Date                     : 2015:06:23 08:43:30+09:00
Page Count                      : 2
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : 
Creator                         : 
Subject                         : 
Description                     : 
Producer                        : GPL Ghostscript 9.07; modified using iTextSharp™ 5.4.2 ©2000-2012 1T3XT BVBA (AGPL-version)
Keywords                        : 
Creator Tool                    : CubePDF
Metadata Date                   : 2015:06:23 08:43:30+09:00
Document ID                     : uuid:4eed2005-2ff5-40ca-a426-aec8c1805803
Instance ID                     : uuid:53c59a57-e1eb-459c-8946-49c171119ee6
PXC Viewer Info                 : PDF-XChange Viewer;2.5.214.2;Feb 17 2014;20:30:27;D:20150622174922+09'00'
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ACJ-LB-SC9

Navigation menu