Panasonic of North America RM433V2 RFID Gateway User Manual User Guide

Download:
Mirror Download [FCC.gov]
Document ID	2867528
Application ID	A8ndGbF6dq7CQ/H/qhbXEQ==
Document Description	User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.41kB (542677 bits)
Date Submitted	2016-01-08 00:00:00
Date Available	2016-07-05 00:00:00
Creation Date	2015-10-06 09:14:36
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2015-10-06 09:14:36
Document Title	Microsoft Word - DO000720-A 433MHz Radio Module User Guide.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Len

433 MHz Radio Module User Guide
Omni-ID office locations: US | UK | China | India | Southeast Asia
DO000720-A 433 MHz Radio Module Use Guide
CONTENTS
1.
Introduction ........................................................................................................................................................................ 2
Module Block diagram............................................................................................................................................................. 2
Regulatory Approvals .............................................................................................................................................................. 3
2.
Specifications ...................................................................................................................................................................... 4
RM433V2 Specifications .......................................................................................................................................................... 4
3.
Pin configurations ............................................................................................................................................................... 5
pin assignments ....................................................................................................................................................................... 5
pin descriptions ....................................................................................................................................................................... 6
4.
electrical characteristics...................................................................................................................................................... 7
Maximum ratings .................................................................................................................................................................... 7
operating conditions ............................................................................................................................................................... 7
5.
Appendix A Additional information .................................................................................................................................... 8
Module drawing ...................................................................................................................................................................... 8
Federal communications commision interference statement ................................................................................................ 9
antennas approved by fcc for use with RM433V2 module ..................................................................................................... 9
fcc end product labelling ......................................................................................................................................................... 9
industry canada statement ................................................................................................................................................... 10
industry canada end product labelling .................................................................................................................................. 10
european r&tte directive 1999/5/ec statement ................................................................................................................... 10
rohs compliance .................................................................................................................................................................... 10
disclaimers ............................................................................................................................................................................. 10
Customer Support ................................................................................................................................................................. 11
-1-
DO000720-A 433 MHz Radio Module Use Guide
1. INTRODUCTION
The RM433V2 radio module is a compact easy to use module to add Omni-ID proprietary RF functionality to any device. The
module is targeted at development partners who need to add RF functionality to a device that will be used as part of an OmniID Proview system. The RM433V2 removes the need for expensive and lengthy development of custom RF board designs
requiring expensive agency certifications.
MODULE BLOCK DIAGRAM
-2-
DO000720-A 433 MHz Radio Module Use Guide
REGULATORY APPROVALS
The RM433V2 has been tested against the requirements of the following European standards.
• Radio EN 300 328 v1.7.1.
• EMC, EN 301 489-17 v2.1.1
• Basic Safety Assessment (BSA) EN 60950-1:2006
Additionally, the module has received FCC “Modular Approval”, in compliance with CFR 47 FCC part 15 regulations and in
accordance to FCC Public notice DA00-1407. Appendix XX contains details on the conditions applying to this modular approval.
The module is approved for use with a range of different antennas; further details of which can be found in section Appendix
YY. The modular approval notice and test reports are available on request. The RM433V2 module is also compliant with
Industry Canada RSS210 (Issue 8, Annex 8) and have Industry Canada modular approval.
-3-
DO000720-A 433 MHz Radio Module Use Guide
2. SPECIFICATIONS
RM433V2 SPECIFICATIONS
Typical DC Characteristics
Notes
Radio Transmit Current
20 mA
Radio Receive Current
20 mA
Center Frequency Accuracy
+/- 10ppm over temperature
Typical RF Characteristics
Additional +/- 3 ppm ageing
Notes
Rx Sensitivity
-100 dBm
Tx Power
+5dBm
Max. Input Signal
10 dBm
RSSI Range
-100 to -10 dBm
RF Port Impedance
50 ohms
Rx Spurious Emissions
TBD
Tx Spurious Emissions
TBD
VSWR (max)
2:1
Mechanical Characteristics
Dimensions (mm)
41.91 x 31.75
Dimensions (in)
1.65 x 1.25
Nominal for .1% BER
433.164 – 434.784 MHz
433.164 – 434.784 MHz
Conducted into 50ohms
Conducted into 50ohms
433.164 – 434.784 MHz
Notes
-4-
DO000720-A 433 MHz Radio Module Use Guide
3. PIN CONFIGURATIONS
PIN ASSIGNMENTS
-5-
DO000720-A 433 MHz Radio Module Use Guide
PIN DESCRIPTIONS
Pin
No
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Pin Function
Signal Type
Description
GND
RFGDO1
RFDGO0
RFGDO2
RM MISO
RM MOSI
RM SCLK
GND
RXD
TXD
RM_CS
GND
TX_IN_PROGRESS
CONFIG_MOD
MSG_PENDING
RX_IN_PROGRESS
GND
RST
TEST
TCK
TMS
TDI
TDO
GND
PWR_OFF
VIN
VIN
GND
GND
GND
0V
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
0V
CMOS
CMOS
CMOS
0V
CMOS
CMOS
CMOS
CMOS
0V
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
0V
CMOS
3.4V-5.0V
3.4V-5.0V
0V
0V
0V
Digital Ground
RF Test Pin
RF Test Pin
RF Test Pin
SPI Master In Slave Out
SPI Slave Master Out Slave In Input
SPI Master Clock Output
Digital Ground
UART RX
UART TX
SPI Module Select line
Digital Ground
Radio transmitting a packet
Enable Module Configuration mode
Receive Message Pending
Radio receiving a packet
Digital Ground
Reset Input
JTAG Test Input
JTAG CLK Input
JTAG Mode Select Input
JTAG Data Input
JTAG Data Output
Digital Ground
Module Power Enable Input
Supply Voltage
Supply Voltage
Digital Ground
Digital Ground
Digital Ground
-6-
DO000720-A 433 MHz Radio Module Use Guide
4. ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Exceeding these conditions will result in damage to the device.
Parameter
Min
Max
Device Supply Voltage
All Pins
Storage Temperature
-0.3V
-0.3V
-40⁰C
5.0V
3.3V
85⁰C
OPERATING CONDITIONS
Supply
Min
Max
VIN
Ambient Temperature Range
3.4V
-40⁰C
5.0V
85⁰C
-7-
DO000720-A 433 MHz Radio Module Use Guide
5. APPENDIX A ADDITIONAL INFORMATION
MODULE DRAWING
-8-
DO000720-A 433 MHz Radio Module Use Guide
FEDERAL COMMUNICATIONS COMMISION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
ANTENNAS APPROVED BY FCC FOR USE WITH RM433V2 MODULE
Brand
Model Number
Description
Gain (dBi)
COMTELCO
COMTELCO
Antenna Factor
Antenna Factor
Omni-ID, Inc.
BS450S-B
Y2243-B
ANT-433-CW-RH
ANT-433-MHW-SMA
CP10636
Vertical Base Station Antenna
YAGI ANTENNA
Helical Whip Antenna
Dipole Antenna
Horizontal Polarized Dipole Antenna
4.65
9.15
-5.6
1.2
2.15
FCC END PRODUCT LABELLING
The final ‘end product’ should be labelled in a visible area with the following: “Contains TX FCC ID: N74-RM433V2”
-9-
DO000720-A 433 MHz Radio Module Use Guide
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropic radiated power (e.i.r.p.) is not more than that permitted for successful communication.
INDUSTRY CANADA END PRODUCT LABELLING
For end devices that will be sold or used in Canada the following text should appear on the product label.
“Contains Industry Canada ID IC: 10336A-RM433V2”
EUROPEAN R&TTE DIRECTIVE 1999/5/EC STATEMENT
The RM433V2 module listed in this datasheet is compliant with ETSI EN 300 328 V1.7.1 (2006-10), EMC, EN 301 489-17 v2.1.1
(2009-02) and the Basic Safety Assessment (BSA) EN 60950-1:2006 (2006-06) and is subject to a Notified Body Opinion. The
modules are approved for use with the antennas listed in the following table.
Brand
Model Number
Description
Gain (dBi)
COMTELCO
COMTELCO
Antenna Factor
Antenna Factor
Omni-ID, Inc.
BS450S-B
Y2243-B
ANT-433-CW-RH
ANT-433-MHW-SMA
CP10636
Vertical Base Station Antenna
YAGI ANTENNA
Helical Whip Antenna
Dipole Antenna
Horizontal Polarized Dipole Antenna
4.65
9.15
-5.6
1.2
2.15
ROHS COMPLIANCE
The RM433V2 module meets the requirements of Directive 2002/95/EC of the European Parliament and of the Council on
the Restriction of Hazardous Substance (RoHS).
DISCLAIMERS
The contents of this document are subject to change without notice. OMNI-ID, inc. reserves the right to make changes,
without notice, in the products, including circuits and/or software, described or contained therein. Information contained in
this document regarding device applications and the like is intended through suggestion only and may be superseded by
updates. It is your responsibility to ensure that your application meets with your specifications.
-10-
DO000720-A 433 MHz Radio Module Use Guide
CUSTOMER SUPPORT
Information about Omni-ID’s complete line of RFID products can be found on our website: www.omni-id.com.
Additional support is available by phone: +1 (585) 713-1000 or email: support@omni-id.com.
-11-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 12
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2015:10:06 09:14:36
Modify Date                     : 2015:10:06 09:14:36
Title                           : Microsoft Word - DO000720-A 433MHz Radio Module User Guide.docx
Creator                         : PScript5.dll Version 5.2.2
Author                          : Len

EXIF Metadata provided by EXIF.tools