Panasonic Hx Dc2 Owners Manual

HX-WA20 - Owner’s Manual HXWA20-MUL Free User Guide for Panasonic Camcorder, Manual - page2

2015-08-19

: Panasonic Panasonic-Hx-Dc2-Owners-Manual-791846 panasonic-hx-dc2-owners-manual-791846 panasonic pdf

Open the PDF directly: View PDF .
Page Count: 224

Download
Open PDF In Browser	View PDF

HX-WA20PPPCPU-VQT4F46_mst.book

1 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Owner’s Manual
Dual Camera
Model No.

HX-WA20
HX-WA2
HX-DC2

Preparation

Basic

Advanced
(Recording)

Advanced
(Playback)

Copy/
Dubbing

With a PC

Before connecting, operating or adjusting this product, please read
the instructions completely.

Others

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

VQT4F46
1AG6P1P6499--(S)

until
2012/3/8

HX-WA20PPPCPU-VQT4F46_mst.book

2 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Dear Customer,
Thank you for choosing
Panasonic!
You have purchased one of the
most sophisticated and reliable
products on the market today.
Used properly, we’re sure it will
bring you and your family years of
enjoyment. Please take time to fill
in the information on the right.
The serial number is on the tag
located on the inner side of the
rear door ( HX-WA20 / HX-WA2 )
or the battery holder
( HX-DC2 ) of your camera. Be
sure to retain this manual as
your convenient camera
information source.

Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.

Safety Precautions
HX-WA20

/ HX-WA2

WARNING:
To reduce the risk of fire, electric shock or product damage,
≥ Do not let water or other liquids drip or splash inside the unit.
≥ Do not expose accessories (battery pack, AC adaptor, SD memory
card and etc.) to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on accessories.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.
HX-DC2

WARNING:
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.

2 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

3 ページ

２０１２年２月１４日 火曜日 午後５時１０分

CAUTION!
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place sources of naked flames, such as lighted candles, on this unit.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:

To assure continued compliance, follow the attached
installation instructions and use only shielded interface
cables with ferrite core when connecting to computer or
peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name:
Panasonic
Model No.:
HX-WA20/HX-WA2/HX-DC2
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North America
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
VQT4F46 3

HX-WA20PPPCPU-VQT4F46_mst.book

HX-WA20

4 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-WA2

HX-DC2

The socket outlet shall be installed near the equipment and shall be
easily accessible.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.

AC adaptor
This AC adaptor operates on AC between 100 V and 240 V.
But
≥ In the U.S.A. and Canada, the AC adaptor must be connected to a
120 V AC power supply only.
≥ When connecting to an AC supply outside of the U.S.A. or Canada,
use a plug adaptor to suit the AC outlet configuration.
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.

∫ Concerning the battery

Battery pack (Lithium ion battery pack)
≥ Use the specified unit to recharge the battery pack.
≥ Do not use the battery pack with equipment other than the specified
unit.
≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.
≥ Do not touch the plug terminals (i and j) with metal objects.
≥ Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes,
wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the
eyes. Rinse eyes thoroughly with water, and then consult a doctor.

4 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

5 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Warning
Risk of fire, explosion and burns. Do not disassemble, heat above
60 oC (140 oF) or incinerate.

CAUTION
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.

∫ Product Identification Marking
Product
Dual Camera

Location
/ HX-WA2
Inner side of LCD monitor
HX-WA20
HX-DC2

Battery holder
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.

VQT4F46 5

HX-WA20PPPCPU-VQT4F46_mst.book

6 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Precautions
USE & LOCATION

WARNING
≥ AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED
BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE
THE SD CARD.

CAUTION
≥ DO NOT AIM YOUR CAMERA AT THE SUN OR OTHER BRIGHT
OBJECTS
≥ DO NOT EXPOSE YOUR CAMERA TO EXTENDED HIGH
TEMPERATURE ... Such as, in direct sunlight, inside a closed car,
next to a heater, etc... This action could permanently damage the
internal parts of your camera.
≥ AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is
suddenly moved from a cold place to a warm place, moisture may form
on the SD card and inside the unit.
≥ DO NOT LEAVE YOUR CAMERA OR THE POWER SUPPLY
TURNED ON WHEN NOT IN USE.
≥ STORAGE OF YOUR CAMERA ... Store and handle your camera in a
manner that will not subject it to unnecessary movement (avoid
shaking and striking). Your camera contains a sensitive pick-up device
which could be damaged by improper handling or storage.
CARE
≥ TO CLEAN YOUR CAMERA ... Do not use strong or abrasive
detergents when cleaning your camera body.
≥ TO PROTECT THE LENS ... Do not touch the surface of the lens with
your hand. Use a commercial camera lens solution and lens paper when
cleaning the lens. Improper cleaning can scratch the lens coating.
≥ TO PROTECT THE FINISH OF YOUR CAMERA ... Before handling
your camera, make sure your hands and face are free from any
chemical products, such as suntan lotion, as it may damage the finish.

6 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

7 ページ

２０１２年２月１４日 火曜日 午後５時１０分

-If you see this symbol-

Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.

∫ About recording formats and compatibility of the unit
≥ The unit is an MP4 format (MPEG-4 AVC file standard) Dual Camera
for recording high-definition motion pictures.
≥ AVCHD and MPEG2 motion pictures are different formats, and are not
therefore supported by the unit.

∫ Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or
indirectly due to any type of problems that result in loss of recording or
edited content, and does not guarantee any content if recording or editing
does not work properly. Likewise, the above also applies in a case where
any type of repair is made to the unit (including any other non-built-in
memory related component).

∫ Handling of built-in memory
This unit is equipped with the built-in memory. When using this
component, pay attention to the following points.
Back up data periodically.
The built-in memory is temporary storage. In order to avoid erasing data
due to static electricity, electromagnetic waves, breakage, and failures,
back up the data to a PC or disc. (l 145)
≥ The status indicator (l 24, 29) illuminates in red while the SD card or
built-in memory is being accessed (initialization, recording, playback,
deleting etc.). Do not perform the following operations when the
indicator illuminates. It may damage the built-in memory or cause a
malfunction in the unit.
j Turn the unit off (remove the battery)
j Insert and remove the SD Card
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
≥ About disposing of or giving away this unit. (l 184)
VQT4F46 7

HX-WA20PPPCPU-VQT4F46_mst.book

8 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Cards that you can use with this unit
SD Memory Card, SDHC Memory Card and SDXC Memory Card
≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
≥ Refer to page 39 for more details on SD cards.

∫ For the purposes of this owner’s manual
≥ SD Memory Card, SDHC Memory Card and SDXC Memory Card are
referred to as the “SD card”.
≥ Functions that can be used for motion picture recording/motion picture
playback are indicated by
in this owner’s manual.
≥ Functions that can be used for still picture recording/still picture
playback are indicated by
in this owner’s manual.
≥ Functions that can be used for audio recording/audio playback are
indicated by
in this owner’s manual.
≥ Pages for reference are indicated by an arrow, for example: l 00
≥ “File” is used to mean “scene”, “still picture” and “audio file”.
This owner’s manual is designed for use with models HX-WA20 , HX-WA2
and HX-DC2 . Pictures may be slightly different from the original.
≥ The illustrations used in this owner’s manual show model HX-DC2 ,
however, parts of the explanation refer to different models.
≥ Depending on the model, some functions are not available.
≥ Features may vary, so please read carefully.
≥ Not all models may be available depending on the region of purchase.

8 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

9 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Contents
Preparation
(Important)
About the Waterproof and Dustproof Performance of this unit
[HX-WA20]/[HX-WA2] .......................................................................
Check before using underwater ..................................................
Using this unit underwater...........................................................
Caring for this unit after using it underwater ...............................
Accessories......................................................................................
Names and Functions of Main Parts ..............................................
HX-WA20/HX-WA2 .....................................................................
HX-DC2.......................................................................................
Power supply....................................................................................
Inserting/removing the battery.....................................................
Charging the battery ...................................................................
Charging and recording time.......................................................
Recording to a card .........................................................................
Cards that you can use with this unit ..........................................
Inserting/removing an SD card....................................................
Turning the unit on/off.....................................................................
About standby mode ...................................................................
About economy function .............................................................
About the high temperature warning icon ...................................
Selecting a mode .............................................................................
Setting date and time.......................................................................

13
15
18
18
22
24
24
27
30
30
34
36
39
39
40
44
44
45
46
47
48

Basic
Before recording ..............................................................................
Recording motion pictures .............................................................
Recording still pictures ...................................................................
About recording still pictures during motion picture recording
and audio recording ....................................................................
Recording audio...............................................................................
Intelligent Auto Mode ......................................................................

50
52
55
58
59
61

VQT4F46 9

HX-WA20PPPCPU-VQT4F46_mst.book

10 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Motion picture/Still picture/Audio playback ..................................
Using the menu screen ...................................................................
Using Option Menu ..........................................................................
OPTION MENU 1........................................................................
OPTION MENU 2........................................................................
OPTION MENU 3........................................................................

64
68
70
70
71
73

Advanced (Recording)
Using the zoom ................................................................................ 76
Double range zoom [HX-WA2]/[HX-DC2] ................................... 77
Zoom mode ................................................................................. 78
Image stabilizer ................................................................................ 80
Recording in Slow Motion Mode [HX-WA20] ................................. 81
Burst recording ................................................................................ 83
Recording panorama still pictures ................................................. 85
Recording underwater [HX-WA20]/[HX-WA2] ................................ 88
Record with color balance and audio that are suitable
for recording underwater ............................................................. 88
Recording functions of menus ....................................................... 89
RECORDING MENU 1................................................................ 89
RECORDING MENU 2................................................................ 96
RECORDING MENU 3.............................................................. 100
RECORDING MENU 4.............................................................. 107
Manual recording ........................................................................... 108
White Balance ........................................................................... 108
Manual shutter speed/iris adjustment [HX-WA20] .................... 110
Setting the focus and recording ................................................ 112

Advanced (Playback)
Playback Operations .....................................................................
Playback using operation icon ..................................................
Creating still picture from motion picture...................................
Cutting out a section of a panorama still picture .......................
Zooming in on a still picture during playback
(Playback zoom) .......................................................................

10 VQT4F46

113
113
115
116
117

HX-WA20PPPCPU-VQT4F46_mst.book

11 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Various playback functions ..........................................................
Changing the playback settings and playing back
the slide show ...........................................................................
Displaying file information .........................................................
Using the playback menu..............................................................
PLAYBACK MENU 1.................................................................
PLAYBACK MENU 2.................................................................
Deleting scenes/still pictures/audio files.....................................
Protecting a file .........................................................................
Watching Video/Pictures on your TV ...........................................
Connecting with an HDMI micro cable/HDMI mini cable...........
TV format setting.......................................................................
Playback using VIERA Link™ .......................................................

118
118
120
122
122
124
128
131
132
137
137
138

Copy/Dubbing
Copying from Built-in Memory to SD card .................................. 142
Dubbing images onto other video devices.................................. 143

With a PC
What you can do with a PC ........................................................... 145
End User License Agreement ................................................... 148
Operating environment ................................................................. 150
Installation ...................................................................................... 154
Connecting to a PC........................................................................ 155
Use as a card reader ................................................................ 156
Using the unit as a web camera................................................ 159
Starting HD Writer VE 2.0 .............................................................. 161
Reading the operating instructions of the software applications ..... 161
If using Mac .................................................................................... 162
Uploading files to a web service .................................................. 163
Using the Eye-Fi™ transfer feature .............................................. 166

Others
LCD Display Indications................................................................ 169
Messages........................................................................................ 173
VQT4F46 11

HX-WA20PPPCPU-VQT4F46_mst.book

12 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Troubleshooting.............................................................................
Cautions for use.............................................................................
About copyright .............................................................................
Recording modes/approximate recordable time ........................
Approximate number of recordable pictures ..............................
Specifications.................................................................................
Optional accessories.....................................................................
Accessory Order Form
(For USA and Puerto Rico Customers).....................................
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)........
Warranty (For Canadian Customers) ...........................................
Useful Information (Only For Latin American Countries) ..........
Index ...............................................................................................
Spanish Quick Use Guide/Guía española para el uso rápido ....

12 VQT4F46

173
182
189
191
193
196
203
205
206
208
209
210
212

HX-WA20PPPCPU-VQT4F46_mst.book

13 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

(Important)
About the Waterproof and
Dustproof Performance of this unit
[HX-WA20]/[HX-WA2]
HX-WA20

Waterproof/Dustproof Performance
This unit’s waterproof/dustproof rating complies with the
“IP58” rating. Provided the care and maintenance guidelines
described in this document are strictly followed, this unit can
operate underwater, to a depth not exceeding 3 m (10 feet) for
a time not exceeding 60 minutes. *
HX-WA2

Waterproof Performance
This unit’s waterproof rating complies with the “IPX8” rating.
Provided the care and maintenance guidelines described in
this document are strictly followed, this unit can operate
underwater, to a depth not exceeding 3 m (10 feet) for a time
not exceeding 60 minutes. *
This does not guarantee no destruction, no malfunction, or
waterproofing in all conditions.
* This means that this unit can be used underwater for specified time in
specified pressure in accordance with the handling method established
by Panasonic.

∫ Handling of this unit
≥ Waterproofing is not guaranteed if the unit is subject to an impact as a
result of being hit or dropped etc. If an impact to this unit occurs, it
should be inspected (subject to a fee) by a Panasonic’s Service Center
to verify that the waterproofing is still effective.
≥ The waterproof performance may be degraded due to the strong water
pressure when this unit is used deeper than 3 m (10 feet) underwater.
≥ When this unit is splashed with detergent, soap, hot spring, bath
additive, sun oil, sun screen, chemical, etc., wipe it off immediately.
≥ Waterproof function of this unit is for sea water and fresh water only.
≥ Any malfunction caused by customer misuse, or mishandling will not
be covered by the warranty.
≥ The inside of this unit is not waterproof. Water leakage will cause
malfunction.
VQT4F46 13

HX-WA20PPPCPU-VQT4F46_mst.book

14 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Supplied accessories such as battery pack etc. are not waterproof.
(excluding handstrap)
≥ Cards are not waterproof. Do not handle with a wet hand. Also, do not
insert wet card into this unit.
≥ Do not leave this unit for a long period of time in places where
temperature is very low (at ski resorts or at high altitude etc.) or very
high [above 35 oC (95 oF)], inside a car under strong sunlight, close to a
heater, on the beach, etc. Waterproof performance may be degraded.
≥ Foreign objects may adhere to the inner side of the rear door
(around the rubber seal or connecting terminals) when the rear
door is opened or closed in places with sand or dust etc. This
may result in the impairment of the waterproof performance if the
rear door is closed with foreign objects adhered. Be extremely
careful since it may result in malfunction etc.
≥ If any foreign object has adhered to the inner side of the rear door,
remove with the supplied brush.
≥ If any liquid such as water droplets has adhered to this unit or
inner side of the rear door, wipe off with a soft dry cloth. Do not
open or close the rear door near the water, when underwater,
using wet hands, or when this unit is wet. It may cause water
leakage.

∫ When inner side of the lens is fogged (condensation)
It is not a malfunction or failure of this unit. It may be caused by the
environment in which this unit is used.
≥ Be careful of condensation since it causes lens stains, fungus and unit
malfunction.
What to do when inner side of the lens is fogged
≥ Turn off the unit and open the rear door in a place with constant
ambient temperature, away from high temperatures, humidity, sand
and dust. The fog will disappear naturally in about 2 hours with the rear
door open when the temperature of this unit gets close to the ambient
temperature.
≥ Contact Panasonic’s Service Center if the fogging does not disappear.
Conditions in which inner side of the lens may be fogged
Condensation may occur and the inner side of the lens may be fogged
when this unit is used in areas that undergo a significant change in
temperature or in high humidity, such as the following:
≥ When this unit is used underwater suddenly after being on a hot
beach etc.
≥ When this unit is moved to a warm area from a cold area, such as
at a ski resort or at high altitude
≥ When the rear door is opened in a high-humidity environment

14 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

15 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Check before using underwater
Do not open or close the rear door in places with sand and dust,
close to water, or with wet hands. Sand or dust adhering may
cause water leaks.

Open the rear door.




SD CARD/
BATTERY



LOCK

1 Unlock the LOCK lever.
2 Slide the open/close lever.
3 Open the rear door.

Check that there are no foreign objects on the inner
side of the rear door.

≥ If there are any foreign objects, such as lint, hair, sand, etc., on the
surrounding area, water will leak within a few seconds causing
malfunction.

If there is foreign matter adhering to the unit, use the
supplied brush to remove it.

≥ Be extremely careful to remove any sand etc. that may adhere to the
sides and corners of the rubber seal.
≥ Keep the brush out of reach of children to prevent swallowing.

VQT4F46 15

HX-WA20PPPCPU-VQT4F46_mst.book

16 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Use the brush end with the short (hard) bristles to remove larger
foreign matter or damp sand from the unit.



A Brush (supplied)
≥ Wipe it off with a dry soft cloth if there is any
liquid. It may cause water leaks and
malfunction if you use this unit with liquid
adhered.

Check for cracks and deformation of the rubber seal
on the rear door.

≥ The integrity of the rubber seals may decrease after about 1 year, with
use and age. To avoid permanently damaging this unit the seals should
be replaced once each year. Please contact Panasonic’s Service
Center for related costs and other information.

16 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

17 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Close the rear door securely.

SD CARD/



LOCK

BATTERY



1 Close the rear door.
2 Slide the open/close lever.
3 Lock the LOCK lever.
≥ Lock securely to the points where the red portion of the open/close
lever and LOCK lever are no longer visible.
≥ To prevent water seeping into this unit, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.

∫ About handling the brush
≥ Before use, check that foreign matter has not adhered to the brush.
≥ After use, remove any adhered foreign matter and clean in preparation
for next use.

VQT4F46 17

HX-WA20PPPCPU-VQT4F46_mst.book

18 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Using this unit underwater
≥ Use this unit underwater at a depth of down to 3 m (10 feet) with the
water temperature between 0 oC and 35 oC (32 oF and 95 oF).
≥ Do not use this unit at a depth of over 3 m (10 feet).
≥ Do not use it in hot water over 35 oC (95 oF) (in a bath or a hot spring).
≥ Do not use this unit underwater not longer than 60 minutes
continuously.
≥ Do not open or close the rear door.
≥ Do not apply shock to this unit underwater. (Waterproof performance
may not be maintained, and there is a chance of water leak.)
≥ Do not dive into the water holding this unit. Do not use this unit in a
location where the water will splash strongly, such as rapid flow or
waterfall. (Strong water pressure may be applied, and it may cause
malfunction.)
≥ This unit will sink in the water. Take care not to drop this unit and lose it
underwater by securely placing the strap around your wrist or similar
measure.
≥ Attaching a tripod with a 5.5 mm (0.22 q) screw or larger may open a
hole in this unit through which water will leak.

Caring for this unit after using it underwater
Do not open or close the rear door until the sand and dust is
removed by rinsing this unit with water.
Make sure to clean this unit after using it.
≥ Thoroughly wipe off any water droplets, sand, and saline matter on
your hands, body, hair, etc.
≥ It is recommended to clean this unit indoors, avoiding places where
water spray or sand may fall.
Do not leave this unit uncared for longer than 60 minutes after
using it underwater.
≥ Leaving this unit with foreign objects or saline matter on it may
cause damage, discoloration, corrosion, unusual odour, or
deterioration of the waterproof performance.

18 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

19 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Rinse with water with the rear door closed.

SD CARD/
BATTERY

LOCK

≥ After use at the seaside or underwater, soak the unit in fresh water
pooled in a shallow container for 10 minutes or less.

Drain water by holding this unit upside down and
shaking it lightly a few times.

≥ After using this unit at the seaside or underwater, or after washing it,
water will remain at the speaker site of this unit for a while and it may
cause lower sound or sound distortion.
≥ Fasten the strap firmly to prevent this unit from dropping.

Wipe off water drops on this unit with a dry soft cloth
and dry this unit in a shaded area which is well
ventilated.

≥ Dry this unit by standing it on a dry cloth.
VQT4F46 19

HX-WA20PPPCPU-VQT4F46_mst.book

20 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Do not dry this unit with hot air from dryer or similar. It will deteriorate
the waterproof performance or cause failure due to deformation.
≥ Do not use chemicals such as benzine, thinner, alcohol, or cleanser, or
soap or detergents.

Confirm that there are no water droplets, open the
rear door, and wipe off any water droplets or sand left
inside using a soft dry cloth.

≥ Water droplets may adhere to the card when the rear door is opened
without thoroughly drying. Also, water may accumulate in the gap
around the card compartment, the battery compartment or the terminal
connector. Be sure to wipe any water off with a soft dry cloth.
≥ The water droplets may seep into this unit when the rear door is closed
while it is still wet, causing condensation or failure.

∫ Wiping moisture from the unit
If there is moisture inside the rear door, wipe every crevice completely
clear of moisture.
(This moisture is not due to exposure to water)



A Moisture here

∫ About the water draining design
This unit is designed so that water that entered the gaps around the
zoom button etc. drains out. For this reason, bubbles may appear when
the unit is immersed in water, but this is not a malfunction.
Draining water from the unit
Drainage holes are found on the bottom of the unit. Hold the unit
vertically, as shown, to drain off the water.

20 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

21 ページ

２０１２年２月１４日 火曜日 午後５時１０分

When draining, attach the hand strap to the unit and secure the hand
strap to your wrist to prevent the unit from dropping.



B Drainage holes

VQT4F46 21

HX-WA20PPPCPU-VQT4F46_mst.book

22 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Feb. 2012. These may be subject to
change.
Battery pack
HX-WA20 / HX-WA2
VW-VBX090
HX-DC2

VW-VBX070
AC adaptor
VSK0750
AV cable
HX-WA20

/ HX-WA2

VFA0555
HX-DC2

VFA0543
USB cable
VFA0554

HX-DC2

Lens cap
VFC4701
Lens cap strap
VFC4702

22 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

23 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Handstrap
HX-WA20 / HX-WA2
VFC4817
HX-DC2

VFC4627
To prevent the unit from dropping, be sure
to attach the handstrap. (l 26, 28)
HX-WA20 / HX-WA2
Brush
VYC1064

CD-ROM
Software

VQT4F46 23

HX-WA20PPPCPU-VQT4F46_mst.book

24 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Names and Functions of Main Parts
HX-WA20/HX-WA2
2 3

4
6
7
8
1

LCD monitor (l 51)



≥ It can open up to 90o A, rotate up to 180o B towards the lens or 105o
C towards the opposite direction.
Due to limitations in LCD production technology, there may be some
tiny bright or dark spots on the LCD monitor screen. However, this is
not a malfunction and does not affect the recorded picture.
2
3
4
5
6
7
8

Power button [
] (l 44)
Status indicator (l 7, 34, 40, 186)
Open/close lever [SD CARD/BATTERY] (l 30, 40)
Lock lever [LOCK] (l 30, 40)
Menu button [MENU] (l 68)
REC/
button [REC/
] (l 47)
Intelligent auto button [
] (l 61)

24 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

25 ページ

２０１２年２月１４日 火曜日 午後５時１０分

15
16
17

12
9
10

11
18
14
9

HX-WA20

Slow motion mode button [

] (l 81)

HX-WA2

Zoom range button [
] (l 77)
10 Photoshot button [
] (l 55)
11 SET button [SET] (l 64, 68, 103, 113)
≥ Use the SET button to select the recording functions and playback
operations, and to operate the menu screen.
≥ In this owner’s manual, the SET button is denoted as shown below.
Example:
or

Select using the SET button

12 In Recording Mode: Zoom button [W/T] (l 76)
In Playback Mode: Volume button (l 66, 119)
Zoom button [W/T] (l 117)
Thumbnail display switch [
/
] (l 66)
13 Recording start/stop button [
] (l 52)
14 Rear door (l 30, 40)
15 Card slot
16 Battery holder
17 HDMI micro connector (l 132, 139)
18 USB/AV connector (l 132, 143, 155)
≥ Use the USB cable/AV cable (only the supplied cable).

VQT4F46 25

HX-WA20PPPCPU-VQT4F46_mst.book

26 ページ

２０１２年２月１４日 火曜日 午後５時１０分

22
23
19
20

19 Lens
20 Built-in flash (l 96)
≥ The flash reaches high temperatures and may cause burns if touched.
Please do not touch the flash.
21 Hand strap fixture








≥ Adjust the length after passing your arm through the hand strap.
22 Speaker
23 Internal stereo microphones
24 Tripod receptacle
≥ If you attach a tripod which has a 5.5 mm (0.22 q) screw or larger, it
may damage this unit.

26 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

27 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-DC2

3
4
1

LCD monitor (l 51)
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.

≥ It can open up to 90o.

≥ It can rotate up to 180o A towards the lens or 105o B towards the
opposite direction.
2 Power button [
] (l 44)
3 USB/AV connector (l 133, 143, 155)
≥ Use the USB cable/AV cable (only the supplied cable).
4 HDMI mini connector (l 133, 139)

VQT4F46 27

HX-WA20PPPCPU-VQT4F46_mst.book

28 ページ

２０１２年２月１４日 火曜日 午後５時１０分

6
7
8

9
10
11
12
14
15

13
5

Hand strap fixture






6 Zoom range button [
] (l 77)
7 Photoshot button [
] (l 55)
8 SET button [SET] (l 64, 68, 103, 113)
≥ Use the SET button to select the recording functions and playback
operations, and to operate the menu screen.
≥ In this owner’s manual, the SET button is denoted as shown below.
Example:
or
9

10
11
12
13
14
15

Select using the SET button

In Recording Mode: Zoom lever [W/T] (l 76)
In Playback Mode: Volume lever (l 66, 119)
Zoom lever [W/T] (l 117)
Thumbnail display switch [
/
] (l 66)
Recording start/stop button [
] (l 52)
Menu button [MENU] (l 68)
REC/
button [REC/
] (l 47)
Battery/Card cover (l 32, 42)
Battery holder
Card slot

28 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

29 ページ

16 17 18

２０１２年２月１４日 火曜日 午後５時１０分

20
21
16 Lens
≥ When not using the unit, be sure to fit the lens cap to protect the lens.
≥ Keep the lens cap out of reach of children to prevent swallowing.








17 Speaker
18 Status indicator (l 7, 35, 42, 186)
19 Internal stereo microphones
20 Built-in flash (l 96)
≥ The flash reaches high temperatures and may cause burns if touched.
Please do not touch the flash.
21 Tripod receptacle
≥ If you attach a tripod which has a 5.5 mm (0.22 q) screw or larger, it
may damage this unit.

VQT4F46 29

HX-WA20PPPCPU-VQT4F46_mst.book

30 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Power supply
∫ About batteries that you can use with this unit
HX-WA20 / HX-WA2
The battery that can be used with this unit is VW-VBX090.
HX-DC2

The battery that can be used with this unit is VW-VBX070.
It has been found that counterfeit battery packs which look very
similar to the genuine product are made available to purchase in
some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery
packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a
counterfeit battery pack. To ensure that safe products are used we
would recommend that a genuine Panasonic battery pack is used.

Inserting/removing the battery
HX-WA20/HX-WA2
≥ Press the power button to turn off the unit. (l 44)

Open the rear door.

SD CARD/




LOCK

BATTERY

1 Unlock the LOCK lever.
2 Slide the open/close lever.
3 Open the rear door.

30 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

31 ページ

２０１２年２月１４日 火曜日 午後５時１０分

(To insert the battery pack)

Confirm the orientation of the terminal markings and
insert the battery.



A terminal markings
≥ Confirm that lever B is locked on to the battery.
≥ It is possible to mistakenly insert the battery upside down, so be sure to
check the orientation carefully.

(To remove the battery pack)

Push the lever B toward the
direction of arrow, and pull the
battery straight out.
Close the rear door.

SD CARD/
BATTERY




LOCK



VQT4F46 31

HX-WA20PPPCPU-VQT4F46_mst.book

32 ページ

２０１２年２月１４日 火曜日 午後５時１０分

1 Close the rear door.
2 Slide the open/close lever.
3 Lock the LOCK lever.
Locked state

SD CARD/
BATTERY



Lock lever

LOCK

Open/close
lever

LOCK

Unlocked
state

≥ Lock securely to the points where the red portion C of the open/close
lever and LOCK lever are no longer visible.

HX-DC2
≥ Press the power button to turn off the unit. (l 44)

Open the battery/card cover.
1 Slide while pushing the battery/
card cover.
2 Open the battery/card cover.


32 VQT4F46



HX-WA20PPPCPU-VQT4F46_mst.book

33 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Insert the battery, taking care to match up the terminal markings.



A terminal markings
≥ It is possible to mistakenly insert the battery upside down, so be sure to
check the orientation carefully.

Close the battery/card cover.

≥ Securely close it until it clicks.

Removing the battery
Press and hold down the power button to turn off the unit, then pull up and
remove the battery.
≥ Always check that the LCD monitor and status indicator lamp are off.
≥ Keep the battery pack out of reach of children to prevent swallowing.

VQT4F46 33

HX-WA20PPPCPU-VQT4F46_mst.book

34 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Charging the battery
When this unit is purchased, the battery is not charged. Charge
the battery fully before using this unit for the first time.
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is
connected to an electrical outlet.
Important:
≥ Be sure to use the supplied AC adaptor and USB cable. Do not
use parts supplied with other equipment.
≥ The AC adaptor and USB cable are for use with this unit only. Do
not use them with other equipment. Similarly, do not use AC
adaptors and USB cables from other equipment with this unit.
≥ The battery is charged while the unit is off or in the sleep mode.
(l 45)
The battery cannot be charged while the unit is recording or
playing back.
≥ It is recommended to charge the battery in a temperature between
10 oC and 30 oC (50 oF and 86 oF). (The battery temperature should
also be the same.)
HX-WA20

/ HX-WA2











34 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

35 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-DC2












A Status indicator
B AC adaptor
C To the AC outlet
≥ Insert the plugs as far as they will go.

Connect the USB cable to the AC adaptor.

≥ Check that the plug portion of the AC adaptor is not loose or misaligned.

2
3

Plug the AC adaptor into the AC outlet.
Connect the USB cable to the unit.

≥ The status indicator flashes red with a period of approximately 2 seconds
(approximately 1 second on, 1 second off), and charging begins.
It will turn off when the charging is completed.
≥ Do not use any other AC adaptors except the supplied one.
≥ Do not use any other USB cables except the supplied one.
≥ We recommend using Panasonic batteries (l 22, 36, 37, 203).
≥ If you use other batteries, we cannot guarantee the quality of this
product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
≥ For charging by connecting to another device, refer to page 158.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to
page 186.

VQT4F46 35

HX-WA20PPPCPU-VQT4F46_mst.book

36 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH (When using AC
adaptor)
HX-WA20
Battery model
number
[Voltage/Capacity
(minimum)]

Supplied battery/
VW-VBX090
(optional)
[3.7 V/880 mAh]

Charging Recording
time
mode

2h
30 min

Maximum
continuous
recordable
time

Actual
recordable
time

1 h 10 min

40 min

1 h 20 min

40 min

1 h 15 min

40 min

1 h 30 min

45 min

1 h 50 min

50 min

1 h 30 min

45 min

Maximum
continuous
recordable
time

Actual
recordable
time

1 h 5 min

40 min

1 h 15 min

40 min

1 h 10 min

40 min

1 h 20 min

45 min

1 h 50 min

50 min

1 h 25 min

45 min

1 h 55 min

HX-WA2
Battery model
number
[Voltage/Capacity
(minimum)]

Supplied battery/
VW-VBX090
(optional)
[3.7 V/880 mAh]

36 VQT4F46

Charging Recording
time
mode

2h
30 min

HX-WA20PPPCPU-VQT4F46_mst.book

37 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-DC2
Battery model
number
[Voltage/Capacity
(minimum)]

Supplied battery/
VW-VBX070
(optional)
[3.7 V/700 mAh]

Charging Recording
time
mode

Maximum
continuous
recordable
time

Actual
recordable
time

50 min

30 min

55 min

35 min

50 min

30 min

1 h 5 min

35 min

1 h 25 min

45 min

1 h 5 min

40 min

1 h 30 min

≥ These times are approximations.
≥ The indicated charging time is for when the battery has been
discharged completely. Charging time and recordable time vary
depending on the usage conditions such as high/low
temperature.
≥ The actual recordable time refers to the recordable time when
repeatedly starting/stopping recording, turning the unit on/off, moving
the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.

Battery capacity indication
≥ The display changes as the battery capacity reduces.
#
#
#
#
(red)
When the charge is low,
is displayed at the center of the LCD
monitor.
≥ Due to the characteristics of the battery, it may not be possible to
correctly display the charge remaining on the battery. For instance,
at low temperatures, the
indicator may turn on earlier.
Because the status of the charge remaining indicator changes
according to the ambient temperature, conditions of use, etc., the
indicator should be considered as an approximate guide.
VQT4F46 37

HX-WA20PPPCPU-VQT4F46_mst.book

38 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Approximate operating time and number of
recordable still pictures
HX-WA20
Number of
recordable
pictures

Approx. 230 pictures

Recording time

Approx. 115 min

Playback time

By CIPA standard

Approx. 255 min
HX-WA2

Number of
recordable
pictures

Approx. 260 pictures

Recording time

Approx. 130 min

Playback time

By CIPA standard

Approx. 255 min
HX-DC2

Number of
recordable
pictures

Approx. 210 pictures

Recording time

Approx. 105 min

Playback time

By CIPA standard

Approx. 210 min

Recording conditions by CIPA standard
≥ CIPA is an abbreviation of Camera & Imaging Products Association.
≥ Use of supplied battery
≥ Using a Panasonic SD Memory Card (2 GB)

38 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

39 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Recording to a card
The unit can record motion pictures, still pictures or audio to an SD card
or built-in memory. To record to an SD card, read the following.
This unit (an SDXC compatible device) is compatible with SD Memory
Cards, SDHC Memory Cards and SDXC Memory Cards. When using
an SDHC Memory Card/SDXC Memory Card with other equipment,
check the equipment is compatible with these Memory Cards.

Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed
Class Rating* for motion picture recording.
Card type
SD Memory Card

Capacity
512 MB/1 GB/2 GB

SDHC Memory Card

4 GB/6 GB/8 GB/12 GB/16 GB/
24 GB/32 GB

SDXC Memory Card

48 GB/64 GB

* SD Speed Class Rating is the speed standard regarding continuous
writing. Check via the label on the card, etc.
e.g.:

≥ Please confirm the latest information about SD Memory Cards/SDHC
Memory Cards/SDXC Memory Cards that can be used for motion
picture recording on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
≥ To use the Eye-Fi transfer feature (l 166), an Eye-Fi X2 series SD
card is required.
≥ Operation of SD Memory Cards with a capacity of 256 MB or less is not
guaranteed.
VQT4F46 39

HX-WA20PPPCPU-VQT4F46_mst.book

40 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
≥ The operation of Memory cards exceeding 64 GB cannot be
guaranteed.
≥ When the write-protect switch A on SD card is
locked, no recording, deletion or editing will be
possible on the card.
≥ Keep the Memory Card out of reach of children to
prevent swallowing.

Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on
other equipment, for the first time on this unit, format the SD
card. (l 72) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.

HX-WA20/HX-WA2
Caution:
Check that the status indicator has gone off.

Open the rear door.






SD CARD/
BATTERY

LOCK



Status indicator A
≥ When this unit is accessing the SD card or built-in memory, the
status indicator lights up red.

40 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

41 ページ

２０１２年２月１４日 火曜日 午後５時１０分

1 Unlock the LOCK lever.
2 Slide the open/close lever.
3 Open the rear door.

Insert (remove) the SD card into (from) the card slot.



≥ Face the label side A in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.

Close the rear door.

SD CARD/



LOCK

BATTERY



1 Close the rear door.
2 Slide the open/close lever.
3 Lock the LOCK lever.
≥ Lock securely to the points where the red portion of the open/close
lever and LOCK lever are no longer visible.

VQT4F46 41

HX-WA20PPPCPU-VQT4F46_mst.book

42 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-DC2
Caution:
Check that the status indicator has gone off.

Open the battery/card cover.
Status indicator A






≥ When this unit is
accessing the SD card
or built-in memory, the
status indicator lights up
red.

Insert (remove) the SD card into (from) the card slot.



≥ Face the label side B in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.

42 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

43 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Close the battery/card cover.

≥ Securely close it until it clicks.
≥ Do not touch the terminals on the back of the SD card.
≥ Do not shock, bend, or drop the SD card.
≥ Electrical noise, static electricity or the failure of this unit or the SD card
may damage or erase the data stored on the SD card.
≥ When the status indicator (l 24, 29) illuminates in red, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing the above while the indicator is on may result in damage to
data/SD card or this unit.
≥ Do not expose the terminals of the SD card to water, dirt or dust.
≥ Do not place SD cards in the following areas:
j In direct sunlight
j In very dusty or humid areas
j Near a heater
j Locations susceptible to significant difference in temperature
(condensation can occur.)
j Where static electricity or electromagnetic waves occur
≥ To protect SD cards, return them to their cases when you are not using
them.
≥ About disposing of or giving away the SD card. (l 187)

VQT4F46 43

HX-WA20PPPCPU-VQT4F46_mst.book

44 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Turning the unit on/off
Open the LCD monitor and press the power button to
turn on the unit.
The LCD monitor turns on.
HX-WA20

/ HX-WA2

HX-DC2

To turn off the unit
Hold down the power button until the LCD monitor goes off.
≥ Pressing the power button for a short time sends the unit into
sleep mode. (l 45)

About standby mode
When the LCD monitor is closed while the unit is on, the unit enters
standby mode which consumes very little power.
In standby mode, opening the LCD monitor turns on the unit, making the
unit ready for recording immediately. Use standby mode when you stop
using the unit but intend to use it again after a short time.

44 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

∫ Standby mode

45 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ To turn on the unit

≥ The unit does not go into standby mode when you close the LCD
monitor during motion picture recording or audio recording.
≥ If you open the LCD monitor when in standby mode, the unit enters
recording mode.
≥ In the following cases, opening the LCD monitor does not turn on the
unit. Press the power button to turn on the unit.
j When the unit is originally purchased
j When you have turned off the unit using the power button

About economy function
To prevent battery consumption due to forgetting to turn the unit off etc.,
the economy mode function works to send the unit into sleep mode if the
unit has been on for approximately 5 minutes (default setting) without an
operation being performed. (The LCD monitor switches off, and the
status indicator flashes green)
≥ When the unit is in sleep mode, you can turn on the unit by pressing
any of the buttons on the unit. (The mode prior to entering sleep mode
is restored)
≥ The time until the unit goes into sleep mode can be changed. (l 71)
≥ Approximately 1 hour after entering sleep mode, the unit enters
standby mode.

VQT4F46 45

HX-WA20PPPCPU-VQT4F46_mst.book

46 ページ

２０１２年２月１４日 火曜日 午後５時１０分

About the high temperature warning icon
If the battery temperature or unit internal temperature (excluding battery)
rises, the high temperature warning icon
will provide warning as
indicated below.
Battery/unit
internal
temperature

Screen
display

Unit operation

(ON)

Although it is possible to
record/play back, please stop
using the unit as soon as
possible and turn off the unit.

(ON)

Motion picture recording is no
longer possible. (If you are
recording a motion picture, the
recording stops.) Please turn
off the unit.

(Flashing)

After the flashing of the
,
the unit turns off automatically.
The unit does not turn on when
the temperature drops. (
flashes.)
Wait for the temperature to
drop before using the unit
again.



A High temperature
≥ When you turn off the unit while the temperature is high (
is
displayed), you will not be able to turn on the unit again until the
temperature lowers. (
will flash.)

46 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

47 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Selecting a mode
Change the mode to recording or playback.

Press the REC/

button.

≥ Each press of the REC/
HX-WA20

button changes the mode.

/ HX-WA2

HX-DC2

Recording Mode (l 52, 55, 59)

For recording motion pictures,
still pictures and audio

Playback Mode (l 64, 113)

For playing back motion
pictures, still pictures and audio

VQT4F46 47

HX-WA20PPPCPU-VQT4F46_mst.book

48 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Preparation

Setting date and time
If the screen to set the date and time appears when you turn on the unit,
skip to step 2 and follow the steps to set the date and time.

Select the menu. (l 68)

[MENU]:

# [CLOCK SET]

Select an item (DATE/TIME/DISP) using the SET
button and then tilt the SET button to the right or
press the SET button.

(When [DATE] or [TIME] is selected)

Tilt the SET button to the left or right to select the
desired item and then up and down to set the
numerical values.
e.g.: When [DATE] is selected

≥ The year can be set between 2000 and 2039.

48 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

49 ページ

２０１２年２月１４日 火曜日 午後５時１０分

(When [DISP] is selected)

Select the year/month/day display method using the
SET button.

4
5

Press the SET button.
Select [SAVE DATE AND TIME] using the SET button
and then press the SET button.

≥ To return to the recording screen or playback screen, press the MENU
button.
≥ At the time of purchase, the [CLOCK SET] is not set.
≥ If the date and time have not been set or the built-in clock battery has
run down, the screen display and recording month/day/year
information will appear as follows.
Recording screen display: --- -- ---- --:---Recording month/day/year information: JAN 01 2012 12:00AM
≥ To charge the built-in clock battery, install a fully charged battery in the
unit. If you leave the battery for approximately 2 days, the time settings
will be stored for approximately 7 days. (The charging continues even
when the unit is turned off)
≥ HX-WA20 / HX-WA2
[Before using the unit under water] and [Maintenance after use in
water] are displayed when setting date and time for the first time after
purchase. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.

VQT4F46 49

HX-WA20PPPCPU-VQT4F46_mst.book

50 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Before recording
∫ Basic camera positioning
Example 1:
Grip the unit with the forefinger of
your right hand above the lens and
the middle finger to little finger
surrounding the body.

Example 2:
Grip the unit with the forefinger to
little finger of your right hand
surrounding the body.

≥ To avoid dropping the unit, be sure to attach a handstrap.
≥ When recording, make sure your footing is stable and there is no
danger of colliding with another person or object.
≥ When you are outdoors, record pictures with the sunlight behind you. If
the subject is backlit, it will become dark in the recording.
≥ Keep your arms near your body and separate your legs for better
balance.
≥ When performing zoom operations, you can prevent the jitter
associated with zoom operations by placing your other hand on the
LCD monitor to stabilize the unit.
≥ Ensure that the lens and flash are not obstructed by your fingers or the
handstrap. Also, ensure that your hand is not blocking the
microphones on the LCD monitor.

∫ Basic motion picture recording
≥ The unit should normally be held steady when recording.
≥ If you move the unit when recording, do so slowly, maintaining a
constant speed.
≥ The zoom operation is useful for recording subjects you cannot get
close to, but overuse of zoom in and zoom out can make the resulting
motion picture less enjoyable to watch.

50 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

51 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Recording yourself
Rotate the LCD monitor towards the lens side.
≥ The image is horizontally flipped
as if you see a mirror image.
(However the image recorded is
the same as a normal recording.)
≥ HX-WA20
During recording in Slow Motion
Mode (l 81), the image is not
horizontally flipped even if you
rotate the LCD monitor towards the lens side.

∫ If the surface of the unit gets hot
Due to the characteristics of the unit, the outer surface may become
warm during use, but this does not indicate a malfunction.
≥ If the unit starts to feel uncomfortably hot during use, you might
temporarily discontinue use until it cools down, or try holding it in your
other hand for a while. Please use a tripod or other support when using
the unit for a long time.

VQT4F46 51

HX-WA20PPPCPU-VQT4F46_mst.book

52 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Recording motion pictures
≥ HX-DC2
Before turning on the unit, remove the lens cap.
≥ Motion pictures are recorded to the SD card if one is inserted. If no SD
card is inserted, the motion pictures are recorded to the built-in memory.
HX-WA20

1
2

/ HX-WA2

HX-DC2

Open the LCD monitor.
Press the recording start/stop button to start
recording.

000:00:00

A When you begin recording, ¥ appears.

Press the recording start/stop button again to pause
recording.

52 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

53 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ About the screen indications in the motion picture
recording
000:00:15

Recording mode
Motion picture operation indicator (l 171)

μ (Red)

000:00:15

During motion picture recording
When the remaining recordable time drops to
approximately 30 seconds or less, μ flashes.
( HX-WA20 During recording in Slow Motion Mode
(l 81), μ does not flash)
During recording:
Recording time elapsed
Each time the unit is put into recording pause, the
counter display will be reset to 000:00:00.
During recording standby:
Approximate remaining recordable time

VQT4F46 53

HX-WA20PPPCPU-VQT4F46_mst.book

54 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ The images recorded between pressing the recording start/stop button
to start recording and pressing it again to pause recording become one
scene.
≥ If the file size exceeds 4 GB during recording, the unit saves the file
and saves the continuation in a new file. (A new file is created
automatically every 4 GB (l 192))
≥ While recording is in progress, the recording will not stop even if the
LCD monitor is closed.
≥ Please refer to page 191 for details about approximate recordable
time.

About the compatibility of the recorded motion
pictures
≥ They are not compatible with devices other than those that support
MP4. Images cannot be played with equipment that does not
support MP4. Confirm that your equipment supports MP4 by
referring to the operating instructions.
≥ There are some cases where the recorded motion pictures cannot
be played back, even if the device supports MP4. In such a case,
play back on this unit instead.

54 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

55 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Recording still pictures
≥ HX-DC2
Before turning on the unit, remove the lens cap.
≥ Still pictures are recorded to SD card if one is inserted. If no SD card is
inserted, the still pictures are recorded to the built-in memory.
HX-WA20

1
2

/ HX-WA2

HX-DC2

Open the LCD monitor.
(For auto focus only)

Press the

button halfway.

F3.5
1/30



A Focus area (area inside brackets)

Press the

button fully.

≥ If you continue to hold down the
button, you can check the
recorded image on the LCD monitor.

VQT4F46 55

HX-WA20PPPCPU-VQT4F46_mst.book

56 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ About the recording standby screen display
The field of view of the image displayed on the LCD monitor differs for
motion picture recording and still picture recording. At time of purchase,
the recording standby screen displays video view. Press the
button
halfway to change to photo view.
≥ When [PHOTO VIEW] is set to
(ON), you can change the recording
standby screen display to the photo view. (l 107)
Video view

Photo view



A Video recording area

∫ About the screen indications in the still picture
recording
14 M

3000

ISO400
F3.5
1/30

Still picture operation indicator (l 169)
Size of still pictures (l 90)
3000

Remaining number of still pictures

Flash (l 96)

ISO400

ISO (l 100)

F3.5

Iris value

1/30

Shutter speed
Image stabilizer for still picture (l 80)

56 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

57 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ About the focusing area
≥ When [FOCUS MODE] (l 98) is set to

[9-PT AUTOFOCUS],
(focusing area A)
14M
is displayed at the position where focus is
achieved.
The unit automatically determines the
position where focus is achieved from nine
focus points within the recording area. If the
focusing area doesn’t appear in a desired position, try adjusting the
camera angle etc., and focus again.
When focus is achieved over a wide range at the center of the screen,
a large focusing area is displayed.
≥ When [FOCUS MODE] (l 98) is set to [SPOT FOCUS], the unit can
focus on the subject in the center of the recording area.
≥ When the risk of jitter increases due to a slower shutter speed while
recording still picture,
(camera shake icon) will appear on the LCD
monitor. When this occurs, attach the unit to a tripod to prevent jitter
while recording or set [FLASH] to ßA (AUTO). (l 96)
≥ When recording in a dark environment, writing to the card may take
time.
≥ To print a picture, save the picture to the SD card (l 142) and print
using a PC or a printer.
≥ The edges of still pictures recorded on this unit with a 16:9 aspect ratio
may be cut at printing. Check the printer or photo studio before
printing.
≥ Please refer to page 193 for details about the number of recordable
pictures.

VQT4F46 57

HX-WA20PPPCPU-VQT4F46_mst.book

58 ページ

２０１２年２月１４日 火曜日 午後５時１０分

About recording still pictures during
motion picture recording and audio
recording
You can record still pictures while recording a motion picture or while
recording audio. (simultaneous recording)

Press the
the picture.

button fully (press to the bottom) to take

≥ When the recordable time drops to approximately
30 seconds or less, the unit can no longer record still
pictures while recording a motion picture or while
recording audio.

∫ About picture size
When you record a still picture while recording a motion picture or audio,
the picture size will depend on the Recording mode. (l 89)
Recording
mode

Picture size

/
/
/

0.9M

Aspect ratio

1920k1080

16:9

1280k720

16:9

640k480

4:3

≥ Still pictures cannot be recorded during
recording.
≥ HX-WA20
Still pictures cannot be recorded during
or
recording.
(l 81)
≥ Burst recording is not possible.
≥ The Flash (l 96) and Image stabilizer for still picture (l 80) are
disabled.

58 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

59 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Recording audio
≥ Audio is recorded to the SD card if one is inserted. If no SD card is
inserted, the audio is recorded to the built-in memory.

1
2

Open the LCD monitor.
Select the menu. (l 68)

[MENU]:

# [REC MODE] # [

(VOICE RECORD)]

Start recording by pressing the recording start/stop
button.

Press the recording start/stop button again to stop
recording.

VQT4F46 59

HX-WA20PPPCPU-VQT4F46_mst.book

60 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ About the screen display for audio recording
000:00:15

Audio operation indicator (l 170)
(Red)

000:00:15

During audio recording
When the remaining recordable time drops to
approximately 30 seconds or less, μ flashes.
During audio recording:
Recording time elapsed
Every time recording is stopped, the indicator
returns to 000:00:00.
During audio recording standby:
Approximate remaining recordable time

≥ When the recording time exceeds approximately 5 hours, the file is
saved and the audio recording ends.

60 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

61 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Intelligent Auto Mode
The modes (appropriate for the condition) are set just by pointing the unit
to what you want to record.

HX-WA20/HX-WA2

Press the
button to
switch to Intelligent Auto
Mode.
≥ Please refer to page 108 for
details about Manual Mode.

HX-DC2
Select the menu. (l 68)
[MENU]:

# [INTELLIGENT AUTO] # [

(ON)]

≥ Please refer to page 108 for details about Manual Mode.

VQT4F46 61

HX-WA20PPPCPU-VQT4F46_mst.book

62 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Mode

Effect

Portrait

Faces are detected and focused
automatically, and the brightness is adjusted
so it is recorded clearly.

Scenery

The whole landscape will be recorded vividly
without whiting out the background sky,
which may be very bright.

Spotlight

Very bright object is recorded clearly.

Low light

It can record very clearly even in a dark
room or twilight.

Night portrait

A person and the background are recorded
with near real-life brightness.

Night scenery

You can record night scenery vividly by
slowing the shutter speed.

Macro

This allows recording while going near to the
object of recording.

Normal

Adjusts the contrast and gives a clean image
when not using the above modes.

*1 Mode for motion picture recording only
*2 Mode for still picture recording only
≥ Depending on the recording conditions, the unit may not enter the
desired mode.
≥ We recommend using a tripod in Night portrait/Night scenery/Low light.
≥ Faces cannot be detected depending on the recording conditions, such
as when faces are of certain sizes or at certain tilts or when digital
zoom is used.

62 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

63 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and
Auto Focus operate and automatically adjust the color balance and
focusing.
Depending on the brightness of the subject etc., the aperture and shutter
speed are automatically adjusted for an optimum brightness.
≥ Color balance and focus may not be adjusted automatically depending
on light sources or scenes. If so, manually adjust these settings.
(l 108, 112)

Automatic White Balance
The illustration shows the range over which Automatic White Balance
functions.
1)

The effective range of Automatic
White Balance adjustment on this unit
2) Blue sky
3) Cloudy sky (rain)
4) Sunlight
5) White fluorescent lamp
6) Halogen light bulb
7) Incandescent light bulb
8) Sunrise or sunset
9) Candlelight
If the Automatic White Balance is not
functioning normally, adjust the White
Balance manually. (l 108)

10 000K
9 000K
8 000K
7 000K

6 000K
4)

5 000K
5)

4 000K
6)

3 000K
7)

2 000K

Auto Focus
The unit focuses automatically.
≥ Auto Focus does not work correctly in the following situations. Record
pictures in the Manual Focus Mode. (l 112)
j Recording distant and close-up objects at the same time
j Recording a subject behind dirty or dusty window
j Recording a subject that is surrounded by objects with glossy
surfaces or by highly reflective objects

VQT4F46 63

HX-WA20PPPCPU-VQT4F46_mst.book

64 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Motion picture/Still picture/Audio
playback
HX-WA20

/ HX-WA2

HX-DC2

Press the REC/
mode.

Select the file to play back using the SET button and
press the SET button.

button to change to playback

Thumbnail display



A The information for the file in the yellow frame is displayed.
≥ Tilt and hold the SET button up or down to display the next (or
previous) page.

64 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

65 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Play back using the SET button.
Motion picture/audio playback
Playback/Pause

Rewind playback



Fast forward playback
Stops the playback and
shows the thumbnails.

B Operation icon*
* If the operation icon disappears, perform a SET button operation to
display it.
Still picture playback
Deletes still picture (l 128)

Displays previous file

Displays next file
Stops playback and returns to
thumbnail display

VQT4F46 65

HX-WA20PPPCPU-VQT4F46_mst.book

66 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the
following order if the zoom button ( HX-WA20 / HX-WA2 ) or zoom lever
( HX-DC2 ) is operated to
side or
side.
21 files () 8 files () 1 file
≥ If you operate the zoom button ( HX-WA20 /
HX-WA2 ) or zoom lever ( HX-DC2 ) to the
side from the 21 files display mode, the unit goes
to the playback folder selection screen. (l 74)
≥ If you operate the zoom button ( HX-WA20 /
HX-WA2 ) or zoom lever ( HX-DC2 ) to the
side with a still picture in a single file display state, the unit enters
playback zoom (l 117).
≥ When the SET button is tilted to the right (left) during single file display,
the next (previous) file is displayed.
≥ When following operations are performed, 8 file display is restored.
j If you turn the unit off
j If you change the recording mode
j If you display the menu screen

∫ Speaker volume adjustment
To adjust the speaker volume during motion picture or audio playback,
operate the volume button ( HX-WA20 / HX-WA2 ) or volume lever
( HX-DC2 ) during playback.
Towards
:
Increases the volume
Towards
:
Decreases the volume

T
W

VOLUME SETTING

≥ When a playback of a motion picture file or audio file ends, the
thumbnail display is restored.
≥ Except in normal motion picture/audio playback, sound is not emitted.
≥ The elapsed time for motion picture playback indication will be reset to
00:00:00 for each scene.
≥ The elapsed time for audio playback indication will be reset to
000:00:00 for each file.

66 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

67 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ On the thumbnail screen for continuously recorded files (l 192)
exceeding 4 GB,
(8 file display) or
(1 file display) is displayed.
≥ Closing the LCD monitor stops playback and sends the unit into
standby mode. (l 44)

Motion picture compatibility
≥ The unit conforms to the MP4 format (MPEG-4 AVC file standard).
≥ Motion pictures recorded on other MP4-compatible equipment may
not play back normally or may not play back at all on this unit.
Similarly, motion pictures recorded on this unit may not play back
normally or may not play back at all on other MP4-compatible
equipment.

Still picture compatibility
≥ This unit conforms to the universal DCF (Design rule for Camera
File system) standard and Exif (Exchangeable Image File Format)
stipulated by JEITA (Japan Electronics and Information Technology
Industries Association). Files which do not conform to the DCF
standard cannot be played back.
≥ The file format of still pictures supported by this unit is JPEG. (Not
all JPEG formatted files will be played back.)
≥ This unit may degrade or not play back still pictures recorded or
created on other products and other products may degrade or not
play back still pictures recorded on this unit.

Audio compatibility
≥ The unit conforms to the AAC file standard.
≥ This unit may degrade or not play back audio recorded or created
on other products and other products may degrade or not play back
audio recorded on this unit.

VQT4F46 67

HX-WA20PPPCPU-VQT4F46_mst.book

68 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Using the menu screen
HX-WA20

/ HX-WA2

HX-DC2

1
2
3

Press the MENU button.

MENU /

Tilt the SET button to the left.
Select tab A or option tab B using the SET button,
and press down the right side of the SET button or
press the SET button.



Select from menu items C using the SET button, and
tilt the SET button to the right, or press the SET
button.



68 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

69 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select the setting content using the SET button and
press the SET button to set.

∫ About applicable mode indicator
In the recording menu, the recording mode that reflects the currently
displayed setting is displayed.


D Applicable mode indicator
: Setting is applied to still picture and motion picture recording.
: Setting is applied to still picture recording.
: Setting is applied to motion picture recording.

To get back to the previous screen
Press the MENU button.

To end the menu setting
Press the MENU button several times.

VQT4F46 69

HX-WA20PPPCPU-VQT4F46_mst.book

70 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Basic

Using Option Menu
≥ The displayed items change depending on the mode setting
(recording mode, playback mode).

Select the menu.
[MENU]:

# desired setting

OPTION MENU 1

[CLOCK SET]
Please refer to page 48.

[ALERT SOUND]
Set the type and volume of operation sounds for the unit.
[TURN ON/OFF]:
Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])
[RECORD BEEP]:
Sets the sound emitted when recording is started and stopped.
([ON]/[OFF])
[SHUTTER]:
Sets the sound emitted when the
([OFF]/[A]/[B]/[C]/[D])

button is pressed.

[KEY SW]:
Sets the sound emitted when the buttons (SET button, MENU button,
etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])
[OPERATION VOL]:
Sets the volume of the operation sounds. ([1] to [7])
[ALL OFF]/[OPERATION SOUNDS ON]:
Sets all operation sounds on/off

70 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

71 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[DISPLAY]
Turns screen display [ON] (display) or [OFF] (not-display).

[ECONOMY]
Sets the time until the unit goes into sleep mode to save on battery
consumption. (l 45)
[BATTERY:REC]:

Sets the time for which the unit is in the
recording mode using the battery, before it goes
into sleep mode.
([1 min]/[3 min]/[5 min]/[10 min])

[BATTERY:PLAY]:

Sets the time for which the unit is in the
playback mode using the battery, before going
into sleep mode.
([1 min]/[3 min]/[5 min]/[10 min]/[30 min])

[AC:REC/PLAY]:

Sets the time for which the unit is in the
recording/playback mode using the AC adaptor,
before going into sleep mode.
([1 min]/[3 min]/[5 min]/[10 min]/[30 min]/
[60 min])

[BRIGHTNESS]
Sets the brightness of the LCD monitor of the unit (7 steps).
2

OPTION MENU 2

[LANGUAGE]
You can select the language on the screen display and the menu screen.

VQT4F46 71

HX-WA20PPPCPU-VQT4F46_mst.book

72 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[TV OUTPUT]
[TV SYSTEM]:

Please refer to page 137.

[TV ASPECT]:

Please refer to page 136.

[HDMI]:

Please refer to page 137.

[VIERA Link]:

Please refer to page 138.

[INITIAL SET]
Returns the menu to the settings at the time of purchase.
≥ Settings for [CLOCK SET], [LANGUAGE] and the double range zoom
( HX-WA2 / HX-DC2 ) will not be changed.

[FORMAT]
Please be aware that if a medium is formatted, then all the data recorded
on the medium will be erased and cannot be restored. Back up important
data on a PC, disc, etc. (l 145)
≥ To format the built-in memory, perform a format with the SD card
removed.
[FORMAT]:
A logical format is performed on the SD card or built-in memory.
[DELETE DATA]:
A physical format is performed on the SD card or built-in memory.
Select [FORMAT] or [DELETE DATA] using the SET button and
press the SET button.
≥ When selecting [DELETE DATA], please use the AC adaptor. When
using the battery, [DELETE DATA] cannot be selected.
≥ Select [DELETE DATA] and perform a physical formatting of the SD
card when the SD card is to be disposed/transferred. (l 187)
≥ Select [DELETE DATA] and perform a physical formatting of the built-in
memory when this unit is to be disposed/transferred. (l 184)

72 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

73 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Do not turn this unit off or remove the SD card, while formatting. Do not
expose the unit to vibrations or shock.
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a
PC. The card may not be used on this unit.

OPTION MENU 3

[REC FOLDER]
Creates or selects a recording folder (folder containing a recorded file).
(SD card recording only)
≥ Insert the SD card.
≥ Set to Recording mode. (l 47)
1 Select [REC FOLDER] using the SET button and press the SET
button.
2 (When creating a folder)
Select [CREATE NEW FOLDER] using the SET button and press
the SET button.
≥ The created folder is set as the recording folder.

(When selecting a folder)
Select the folder number of the desired folder using the SET
button and press the SET button.

≥ You cannot select folders which have been created on other
equipment or folders which already contain the maximum number
of files.

VQT4F46 73

HX-WA20PPPCPU-VQT4F46_mst.book

74 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[PLAYBACK FOLDER]
When the SD card or built-in memory contains multiple folders, you can
select a folder for playback.
≥ Set to Playback mode. (l 47)
1 Select [PLAYBACK FOLDER] using the SET button and press
the SET button.
2 Select the folder to play back using the SET button and press
the SET button.
≥ The thumbnail screen is displayed with the first file in the selected
folder surrounded by a yellow frame.

Select the file to playback using the SET button and press the
SET button.

[FILE NO. CONT’D]
This function sets the file numbers when the card is exchanged or
formatted.
[ON]:

File numbers are retained even when the card is
exchanged or formatted.

[OFF]:

File numbers are reset to start from [0001] when the
card is exchanged or formatted.

74 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

75 ページ

２０１２年２月１４日 火曜日 午後５時１０分

When [FILE NO. CONT’D] is set to [ON] and there are files remaining
on the newly inserted card, the files subsequently recorded on the
card will be numbered as described below.
When the newly inserted card contains file numbers which are
smaller than the file numbers recorded before changing the
cards
The numbering continues from the file currently being recorded.
Example:
If you record files up to 0015 on a first card and then exchange the
first card for a second card, which already has files up to 0005
recorded on it, the new file numbers on the second card will start from
0016.
When the newly inserted card contains file numbers which are
larger than the file numbers recorded before changing the cards
The file number will be consecutive to the last file number recorded on
the second card.
Example:
If you record files up to 0005 on a first card and then exchange the
first card for a second card, which already has files up to 0015
recorded on it, the new file numbers on the second card will start from
0016.
≥ In the case of the built-in memory, when [FILE NO. CONT’D] is set to
[ON] the file numbers can be given consecutive in the same way as
when the card is used.

[Eye-Fi]
Please refer to page 166.

VQT4F46 75

HX-WA20PPPCPU-VQT4F46_mst.book

76 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Using the zoom
≥ Set to Recording mode. (l 47)
HX-WA20

/ HX-WA2

HX-DC2



A Zoom bar

Zoom button ( HX-WA20 /

HX-WA2

) / Zoom lever (

T side:

Close-up recording (zoom in)

W side:

Wide-angle recording (zoom out)

HX-DC2

)

≥ i.Zoom and digital zoom can be set in [ZOOM MODE]. (l 78)

∫ About the zoom bar
W





B : Optical zoom
C : i.Zoom/Digital zoom (blue)
≥ During zoom operations, the zoom bar is displayed.
≥ The magnification displayed at the left and right of the zoom bar is the
minimum and maximum zoom magnification.
≥ When recording motion pictures at high levels of magnification, we
recommend fixing the unit to a tripod to prevent it moving.

76 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

77 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ HX-DC2
If you take your finger off the zoom lever during zoom operation, the
operation sound may be recorded. When returning the zoom lever to
the original position, move it quietly.
≥ The unit will focus from more than approximately 1.1 m (3.6 feet) ( HX-WA20 )
or approximately 1 m (3.3 feet) ( HX-WA2 / HX-DC2 ) when the zoom
magnification is at its maximum.
When the zoom magnification is 1k, this unit can focus on a subject
approx. 10 cm (3.9q) away from the lens. (When switching to Intelligent
Auto Mode, or [FOCUS] is set to
(MACRO), you can record from
as close as 1 cm (0.39q) with the zoom magnification at 1 times and
from 80 cm (2.6 feet) with the zoom magnification at its maximum.)

Double range zoom [HX-WA2]/[HX-DC2]
The enlarged size will be approximately double size (double range
zoom). Press again to return to normal size.
≥ Set to Recording mode. (l 47)

Press the zoom range button.
HX-WA2

HX-DC2

≥ On the normal zoom recording screen, the
icon is displayed. On
the double-range zoom recording screen, the
icon is displayed.
≥ You cannot operate the zoom range button in the i.Zoom/Digital zoom
region (blue). (l 76)
≥ The image enlarged using the double range zoom can be recorded
only as a motion picture. Still pictures are recorded without being
enlarged.
VQT4F46 77

HX-WA20PPPCPU-VQT4F46_mst.book

78 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Zoom mode
Set the digital zoom and i.Zoom.
≥ Select the menu.
[MENU]:

# [ZOOM MODE] # desired setting

(DIGITAL ZOOM):

Digital zoom

(i.ZOOM):

This zoom function allows you to maintain
high-definition picture quality.

(OFF):

Optical zoom only

≥ The larger the digital zoom magnification, the more the image quality is degraded.
≥ With still picture recording, i.Zoom is disabled.
≥ HX-WA20
When [ZOOM MODE] is set to
(DIGITAL ZOOM) or
(i.ZOOM), Slow Motion Mode (l 81) setting is canceled.

∫ About the maximum zoom magnification
The maximum zoom magnification differs according to the mode and
settings of the unit.
HX-WA20

T (Tele)
Image
stabilizer
W (Wide)
for motion
pictures
Motion
picture
recording

78 VQT4F46

Zoom mode setting

(OFF)

(i.ZOOM)

(DIGITAL
ZOOM)

OFF/ON

10k

15k

120k

ACTIVE
MODE

12k

96k

HX-WA20PPPCPU-VQT4F46_mst.book

79 ページ

２０１２年２月１４日 火曜日 午後５時１０分

T (Tele)
W
(Wide)

Picture size

Zoom mode setting

(OFF)

(i.ZOOM)

(DIGITAL
ZOOM)

60k

12 M / 8.3M

Still
picture
recording

7k*

84k

8.5k*

102k
120k

10k*

7.5k*

90k

10k*

120k

* The still picture can be enlarged without degrading the image quality.
(Extra Optical Zoom)
HX-WA2

/ HX-DC2
Image
stabilizer Double
W
for
range
(Wide)
motion
zoom
pictures

OFF/ON
Motion
picture
recording ACTIVE
MODE
Still
picture
recording

–

T (Tele)
Zoom mode setting

(OFF) (i.ZOOM)

(DIGITAL
ZOOM)

7.5k

60k

12k

15k

120k

50k

10k

12k

100k

50k

VQT4F46 79

HX-WA20PPPCPU-VQT4F46_mst.book

80 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Image stabilizer
Use the Image stabilizer to reduce the effects of shake during recording.
≥ Set to Recording mode. (l 47)

∫ Image stabilizer for motion pictures
Select the menu.
[MENU]:

# [E.I.S.(VIDEO)] # desired setting

(ACTIVE MODE):

This setting gives more stabilization and is
suitable for recording when moving.

(ON):

This setting is suitable for recording in a
stable state such as scenery.

(OFF):

Cancel the setting.

≥ When

(ACTIVE MODE) is set, the field of view will differ from normal recording.

Video view in normal recording

Video view in

(ACTIVE MODE)

∫ Image stabilizer for still pictures
Select the menu.
[MENU]:

# [E.I.S.(PICTURE)] # [

(ON)]

≥ Image stabilizer does not work during zoom operations.
≥ When recording with a tripod, we recommend that you set the Image stabilizer off.
≥ [SCENE MODE] will be set to
(OFF) when the [E.I.S.(PICTURE)] is set to
(ON) while the [SCENE MODE] (l 90) is set to
(HDR (Backlight Comp.)).
≥ Stabilization may not be possible under strong camera shaking conditions.
≥ When [SCENE MODE] is set to
(FIREWORKS),
(NIGHT SCENERY),
(NIGHT PORTRAIT) or
(LOW LIGHT), the Image stabilizer may be less effective.
≥ The screen may shake when using optical zoom or during the auto focus
operation, but this does not indicate a fault.

80 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

81 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Recording in Slow Motion Mode
[HX-WA20]
Records slow motion picture with 240 or 480 frames per second.
≥ Set to Recording mode. (l 47)

Set to Slow motion mode.

≥ Each time you press the

button, display changes.

Records a motion picture at 240 frames/second
(640k360 pixels)

Records a motion picture at 480 frames/second
(320k180 pixels)

Off (cancel the setting)

Press the recording start/stop button to start
recording.

Press the recording start/stop button again to pause
recording.

VQT4F46 81

HX-WA20PPPCPU-VQT4F46_mst.book

82 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ After 15 seconds, recording stops automatically.
≥ Audio is not recorded for scenes recorded in Slow Motion Mode.
≥ When set to Slow Motion Mode, [ZOOM MODE] (l 78) will be set to
(OFF).
≥ During recording in Slow Motion Mode, the zoom magnification cannot
be changed. (
is displayed)
Change the zoom magnification before starting to record.
≥ During recording in Slow Motion Mode, still pictures are not recorded.
(l 58)
≥ During recording in Slow Motion Mode, the following function is
disabled.
j [E.I.S.(VIDEO)]
≥ During recording in Slow Motion Mode, the following functions are
disabled and cannot be used.
j [ZOOM MODE], [SCENE MODE] and [FACE CHASER]
≥ [ISO] is set to AUTO.
≥ [EXPOSURE] is set to
(PROGRAM).
≥ During recording in Slow Motion Mode, or playing back the recorded
scene, the LCD monitor or the TV screen may flicker. This is due to
effect of the light sources such as fluorescent lamp or LED light, and
this is not a malfunction.
≥ Refer to page 192 for recordable time.

82 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

83 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Burst recording
Records a sequence of still pictures at a rate of 10 per second or 1 per second.
Use this function to record fast-moving subject.
≥ Set to Recording mode. (l 47)

Select the menu.

[MENU]:

# [BURST] # desired setting

HX-WA20

(16M BURST)
/ HX-DC2
(14M BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the
button, ending the
recording when the maximum number pictures in the burst are reached.
HX-WA2

(3M BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the
button, ending the
recording when the maximum number pictures in the burst are reached.
HX-WA20

(16M REVERSE BURST)
/ HX-DC2
(14M REVERSE BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the
button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
HX-WA2

(3M REVERSE BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the
button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(OFF):
Cancel the setting.
VQT4F46 83

HX-WA20PPPCPU-VQT4F46_mst.book

2
3

84 ページ

２０１２年２月１４日 火曜日 午後５時１０分

(For auto focus only)

Press the

button halfway.

Press the

button fully.

≥ During recording,
lights up in red.
≥ The auto focus works to fix the focus when the
halfway.

button is pressed

∫ Maximum number of pictures in the burst
HX-WA20
[BURST] setting

Maximum number of pictures
in the burst

13
HX-WA2/HX-DC2

[BURST] setting

Maximum number of pictures
in the burst

≥ When recording with the self-timer, the recording ends when the
maximum number of pictures in the burst is reached.
≥ When burst recording, the following functions are disabled and cannot
be used.
j [FLASH]
j
[HDR (Backlight Comp.)] in [SCENE MODE]
j HX-WA20
(HANDHELD NIGHT SHOT) in [SCENE MODE]
j
(HDR (Paint)) in [COLOR MODE]
j [PANORAMA]
≥ The following functions cannot be used with burst recording.
j [E.I.S.(PICTURE)]
j [FACE CHASER]
≥ With burst recording, the shutter speed is faster than 1/30.

84 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

85 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Recording panorama still pictures
By recording while panning the unit vertically or horizontally you can
record a 180e or 360e panorama still picture.
≥ Set to Recording mode. (l 47)

Select the menu.

[MENU]: 1 # [PANORAMA] #
[
(360e PANORAMA)] or [

(180e PANORAMA)]

≥ A white cross is displayed on the LCD monitor.

Press the

button to start the recording.

≥ A red cross is displayed at the center of
the LCD monitor.

Pan the unit horizontally or vertically.

≥ The red cross will shift in the panning
direction. Record in such a way that the
red cross and the white cross align. (If the
red cross separates from the guide, the
panorama still picture cannot be correctly
recorded)

(Example) When
panning horizontally



A guide

To stop panorama recording partway through
Press the

button.

VQT4F46 85

HX-WA20PPPCPU-VQT4F46_mst.book

86 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Recording technique
Move the camera toward the direction of recording taking care not to
shake. (Correct recording is not possible when the shake is too big)

∫ About size of still pictures
The sizes of panorama still pictures are as follows.
HX-WA20
Picture size
Horizontal
panorama still
picture

Vertical
panorama still
picture

(360e PANORAMA)

10688k720

1280k10688

(180e PANORAMA)

5344k720

1280k5344

Panorama setting

HX-WA2/HX-DC2
Picture size
Horizontal
panorama still
picture

Vertical
panorama still
picture

(360e PANORAMA)

14400k720

1280k14400

(180e PANORAMA)

7200k720

1280k7200

Panorama setting

≥ During panorama still picture recording, the zoom function is disabled.
≥ If you record a motion picture with [PANORAMA] set to
(360e
PANORAMA) or
(180e PANORAMA), zoom operations are
available during recording but zoom will be automatically canceled
when you stop.

86 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

87 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ The panorama still picture that will be recorded will be narrower than
what is displayed in the recording screen.
≥ Panorama still pictures are indicated by
or
in the 1-file or 8file thumbnail display.
≥ When recording panorama still pictures, the following functions are
disabled and cannot be used.
j [FLASH], [SCENE MODE],
(HDR (Paint)) in [COLOR MODE],
[BURST] and [SELF TIMER]
≥ The following functions do not work with recording panorama still
pictures.
j [E.I.S.(PICTURE)]
≥ When recording panorama still pictures, [FOCUS] is set to
(AUTO).
≥ HX-WA20
When recording panorama still pictures, [EXPOSURE] is set to
(PROGRAM).
≥ Focus and white balance will be fixed to the optimal values for the still
picture for first frame. Therefore, it may not record with focus or
brightness optimal for the whole panorama still picture when focus or
brightness changes drastically during the recording.
≥ Since panorama still picture is composed from multiple still pictures,
there may be cases where the subject may warp or connection may
stand out.
≥ In the following cases, it may not be possible to record correctly.
j When the swing speed is too fast or too slow
j When recording the subject that have monotone colors or patterns
repeating (such as sky, sandy beach, etc.).
j When recording moving subjects (such as people, pets, automobile,
wave, flowers swaying in the wind, etc.)
j When recording in a dark place
j When recording in places with flickering light source such as
fluorescent lamp, candle, etc.
j When recording the unit held away from your body (axis of rotation)
≥ The recorded panorama picture will not be saved when the recording is
terminated before reaching the half of the set angle. Even if the
recording exceeds the halfway point, black strip will be recorded in the
area that was not recorded when the recording is terminated before
reaching the set angle.

VQT4F46 87

HX-WA20PPPCPU-VQT4F46_mst.book

88 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Recording underwater
[HX-WA20]/[HX-WA2]
The unit can record underwater at depths of down to 3 m (10 feet). (for
periods within 60 minutes)
Before recording underwater, be sure to read “(Important) About
the Waterproof and Dustproof Performance of this unit [HXWA20]/[HX-WA2]” (page 13 to 21) and to use the camera
correctly. Incorrect use may result water entering the unit and
malfunction.

Record with color balance and audio that
are suitable for recording underwater
When recording underwater, set [SCENE MODE] to
(UNDER
WATER). The color balance and audio recording will be suitable for
recording underwater. (l 90)
≥ Set to Recording mode. (l 47)

Select the menu.(l 68)
[MENU]:

# [SCENE MODE] # [

(UNDER WATER)]

≥ When [SCENE MODE] is set to
(UNDER WATER), [Before using
the unit under water] and [Maintenance after use in water] are
displayed. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.
≥ After use underwater, wash the unit in fresh water and dry well. (l 18)
≥ Do not use the Under Water Mode except when recording underwater.
≥ When recording underwater, the sound of the unit motor will be
recorded at a relatively high volume. However, in Under Water Mode,
the sound of the motor is suppressed through the action of an audio
filter. (sound quality differs to when recording in other modes)

88 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

89 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Recording)

Recording functions of menus
≥ Set to Recording mode. (l 47)
≥ Select the menu. (l 68)
[MENU]:

# desired setting

RECORDING MENU 1

[REC MODE]
You can switch between motion picture recording and audio recording,
and switch the image quality of the motion picture to record.
[MENU]:

# [REC MODE] # desired setting

Records with 1920k1080 pixels. (60i)

Records with 1920k1080 pixels. (30p)

Records with 1280k720 pixels. (60p)

Records with 1280k720 pixels. (30p)

Records with 960k540 pixels. (30p)

Records with 640k480 pixels. (30p)

Records audio. (VOICE RECORD)

is a format suitable for Mac (iMovie’11). It is recommended when
using a Mac.

≥ Recordable time using the battery (l 36)
≥ This function’s default setting is
mode.
≥ Please refer to page 191 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving
subject is recorded (particularly when recording in
mode),
mosaic-type noise may appear at playback.
VQT4F46 89

HX-WA20PPPCPU-VQT4F46_mst.book

90 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[PICTURE SIZE]
The higher the number of pixels, the higher the clarity of the picture when
printing.
[MENU]:

# [PICTURE SIZE] # desired setting

Picture size
(HX-WA20)

Picture size
(HX-WA2/HX-DC2)

Aspect ratio

4608k3456

4352k3264

3616k2712

3744k2808

4:3
4:3

2560k1920

4:3

2048k1536

4:3

640k480

4:3

12 M

4608k2592

4352k2448

16:9

8.3M

3840k2160

3744k2106

16:9

2560k1440

16:9

1920k1080

16:9

HX-DC2

[INTELLIGENT AUTO]
Please refer to page 61.

[SCENE MODE]
When you record images in different situations, this mode automatically
sets optimum shutter speeds and apertures.
[MENU]:

90 VQT4F46

# [SCENE MODE] # desired setting

HX-WA20PPPCPU-VQT4F46_mst.book

91 ページ

２０１２年２月１４日 火曜日 午後５時１０分

(OFF):
Cancel the setting
5 (SPORTS):
To make fast moving scenes less shaky with slow playback and pause
of playback
(PORTRAIT):
To make people stand out against the background
(SPOT LIGHT):
Improved quality when subject is brightly illuminated
(SNOW):
Improved image quality when shooting in snowy locations
(BEACH):
To make blue in the sea or sky vibrant
(SUNSET):
To make red in the sunrise or sunset vibrant
(FIREWORKS):
To capture the fireworks in the night sky beautifully
(LANDSCAPE):
For spatial scenery
(NIGHT SCENERY):
To capture the evening or night scenery beautifully
(NIGHT PORTRAIT):
To capture a person and the background brightly
HX-WA20

(HANDHELD NIGHT SHOT)*:
For bright still pictures with reduced image shake
(HDR (Backlight Comp.))*:
Provides definition in regions that would otherwise be black or white
/ HX-WA2
(UNDER WATER):
For reduced background noise and clear underwater recording (l 88)
HX-WA20

(LOW LIGHT):
For dark scenes, such as at dusk
* Mode for still picture recording only. This will not operate during the
motion picture recording.
VQT4F46 91

HX-WA20PPPCPU-VQT4F46_mst.book

92 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ (SUNSET/FIREWORKS/LANDSCAPE/NIGHT SCENERY/NIGHT
PORTRAIT)
j Image may get blurry when close object is recorded.
≥ (FIREWORKS)
j The shutter speed is 1/30. (Motion picture recording)
j Image may get washed out when recorded in bright surrounding.
j
(the camera shake icon) is displayed constantly when recording
still pictures, but this does not indicate a fault.
≥ (NIGHT SCENERY/NIGHT PORTRAIT/HDR (Backlight Comp.))
j Using a tripod is recommended.
≥ (LOW LIGHT)
j The shutter speed is 1/15 or more. (Motion picture recording)
≥ (HDR (Backlight Comp.))
j When recording a moving subject, a ghost image may appear.
j The field of view of the recorded still picture is smaller than the range
displayed on the recording screen.

∫ Limitations of scene mode settings
Setting
(SPORTS)
(PORTRAIT)
(SPOT LIGHT)

Limitations
PANORAMA: Fixed to
COLOR MODE: Fixed to
FOCUS: Fixed to
.

(OFF).
.

HX-WA20

(SNOW)

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.

(BEACH)

PANORAMA: Fixed to
(OFF).
COLOR MODE: Fixed to
.
FOCUS: Fixed to
.
WHITE BALANCE: Fixed to
.

(SUNSET)

HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.

92 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

93 ページ

Setting
(FIREWORKS)

２０１２年２月１４日 火曜日 午後５時１０分

Limitations
PANORAMA: Fixed to
(OFF).
COLOR MODE: Fixed to
.
FOCUS: Fixed to
.
FLASH: Fixed to
.
ISO: Fixed to AUTO.
FACE CHASER: Fixed to
(OFF).
EXP COMPENSATION: Fixed to ± 0.
WHITE BALANCE: Fixed to
.
HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.
(LANDSCAPE)

PANORAMA: Fixed to
(OFF).
COLOR MODE: Fixed to
.
FOCUS: Fixed to
.
FACE CHASER: Fixed to
(OFF).
HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.
(NIGHT SCENERY)

PANORAMA: Fixed to
(OFF).
COLOR MODE: Fixed to
.
FOCUS: Fixed to
.
FLASH: Fixed to
.
FACE CHASER: Fixed to
(OFF).
HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.

VQT4F46 93

HX-WA20PPPCPU-VQT4F46_mst.book

94 ページ

Setting
(NIGHT PORTRAIT)

２０１２年２月１４日 火曜日 午後５時１０分

Limitations
PANORAMA: Fixed to
COLOR MODE: Fixed to
FOCUS: Fixed to
.

(OFF).
.

HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.
HX-WA20

(HANDHELD NIGHT
SHOT)

(HDR (Backlight
Comp.))

BURST: Fixed to
(OFF).
PANORAMA: Fixed to
(OFF).
COLOR MODE: Fixed to
.
FOCUS: Fixed to
.
FLASH: Fixed to
.
E.I.S.(PICTURE): Fixed to
.
ISO: Fixed to AUTO.
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.
BURST: Fixed to
(OFF).
PANORAMA: Fixed to
(OFF).
COLOR MODE: Fixed to
.
FOCUS: Fixed to
.
FLASH: Fixed to
.
E.I.S.(PICTURE): Fixed to
.
METERING MODE: Fixed to
.
ISO: Fixed to AUTO.
HX-WA20

PICTURE SIZE:
or 12 M setting is
disabled.
(
setting is changed to
setting
and 12 M setting is changed to 8.3M
setting)
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.

94 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

95 ページ

Setting
/ HX-WA2
(UNDER WATER)

HX-WA20

２０１２年２月１４日 火曜日 午後５時１０分

Limitations
PANORAMA: Fixed to
COLOR MODE: Fixed to
FOCUS: Fixed to
.

(OFF).
.

HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.
(LOW LIGHT)

PANORAMA: Fixed to
COLOR MODE: Fixed to
FOCUS: Fixed to
.
FLASH: Fixed to
.
ISO: Fixed to AUTO.

(OFF).
.

HX-WA20

Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to
.

[BURST]
Please refer to page 83.

[PANORAMA]
Please refer to page 85.

VQT4F46 95

HX-WA20PPPCPU-VQT4F46_mst.book

HX-WA20

96 ページ

２０１２年２月１４日 火曜日 午後５時１０分

/ HX-WA2

[FLASH]
[MENU]:

# [FLASH] # desired setting

≥ Please see below. ( HX-DC2 [FLASH])
2

RECORDING MENU 2

HX-DC2

[FLASH]
When the
button is pressed, the flash is activated and the picture
will be recorded. Use the built-in flash in order to record still pictures in
dark places.
[MENU]:

# [FLASH] # desired setting

ßA (AUTO):

The unit determines the brightness of the subject
and emits a flash if necessary.

ß (ON):

The unit emits a flash irrespective of the brightness
of the subject.

(OFF):

Cancel the setting.

≥ When [FLASH] is set to ßA (AUTO) or ß (ON), [BURST] and
[PANORAMA] are set to
(OFF).
≥ [SCENE MODE] will be set to
(OFF) when the [FLASH] is set to
ßA (AUTO) or ß (ON) while the [SCENE MODE] (l 90) is set to
(FIREWORKS),
(NIGHT SCENERY),
(HANDHELD
NIGHT SHOT) ( HX-WA20 only),
(HDR (Backlight Comp.)), or
(LOW LIGHT).
≥ If you register a shortcut function (l 103) to the SET button, you can
change the flash setting from the recording screen.

96 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

97 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[SELF TIMER]
The timer can be used to record images or audio.
[MENU]:

# [SELF TIMER] # desired setting

(OFF):

Cancel the setting

Ø2 (2sec):

Records after 2 seconds

Ø10 (10sec):

Records after 10 seconds

When Ø2 (2sec) is selected
When you press the
button or the recording start/stop button, the
status indicator flashes red for approximately 2 seconds, then recording
begins.
On the LCD monitor, an indication of (
#
) appears
to notify you of the recording timing.
When Ø10 (10sec) is selected
When you press the
button or the recording start/stop button, the
status indicator flashes red for approximately 10 seconds, then recording
begins.
On the LCD monitor, an indication of (
#
#
#
#
) appears to notify you of the
recording timing.
≥ After the recording, the self-timer setting is canceled.

To stop the timer midway through
Press the

button or the recording start/stop button.

≥ Setting the self-timer to Ø2 or Ø10 is a good way to prevent image
shake when the
button is pressed while using a tripod etc.
≥ If you register a shortcut function (l 103) to the SET button, you can
change the self-timer setting from the recording screen.
≥ If you set [FOCUS] (l 112) to
(AUTO) or
(MACRO) when
recording still pictures, the unit will focus automatically immediately
before recording.

VQT4F46 97

HX-WA20PPPCPU-VQT4F46_mst.book

98 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ With motion picture recording/audio recording, recording does not turn
off automatically.
≥ If you perform any of the following cases, the self-timer will be
canceled.
j If you turn the unit off
j If you change to the playback mode
j If you send unit into standby mode by closing the LCD monitor
j When it goes into sleep mode

[FOCUS]
Please refer to page 112.

[FOCUS MODE]
You can select the focusing method according to the position of the
subject.
[MENU]:

# [FOCUS MODE] # desired setting

(9-PT AUTOFOCUS):

(SPOT FOCUS):

The unit determines the focus
automatically from 9 focus points (
in the recording range.

)

The unit focuses on the subject over the
focus mark (
) displayed at the
center of the LCD monitor.

[METERING MODE]
You can change the light-metering method used to measure brightness.
[MENU]:

98 VQT4F46

# [METERING MODE] # desired setting

HX-WA20PPPCPU-VQT4F46_mst.book

99 ページ

２０１２年２月１４日 火曜日 午後５時１０分

(MULTI):

The unit automatically assesses the
distribution of brightness over the
screen and meters to ensure that the
exposure is appropriate.

(CENTER):

The unit averages light measurements
over the entire screen, giving higher
weight to the subject at the center of the
screen.

(SPOT):

The unit meters the subject over spot
meter target (
) displayed at the
center of the LCD monitor.

≥ [SCENE MODE] will be set to
(OFF) when the [METERING
MODE] is set to
(CENTER) or
(SPOT) while the [SCENE
MODE] (l 90) is set to
(HDR (Backlight Comp.)).

[COLOR MODE]
You record in different colors and add effects such as skin smoothing.
[MENU]:

# [COLOR MODE] # desired setting

(OFF):

Cancel the setting.

(HDR (Paint))*:

Records still pictures with picture effects.

(SOFT SKIN):

Records with skin softening effects.

(MONOCHROME):

Records in monochrome.

(SEPIA):

Records with colors adjusted to sepia.

(VIVID):

Reduced sharpness and increases color.

(SOFT):

Records with reduced sharpness for a
softer image.

* Mode for still picture recording only
≥ When [COLOR MODE] is set, [SCENE MODE] (l 90) is canceled.

VQT4F46 99

HX-WA20PPPCPU-VQT4F46_mst.book

100 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ (HDR (Paint))
j We recommend use of a tripod.
j The flash is disabled.
j [BURST] and [PANORAMA] are set to
(OFF).
j [E.I.S.(PICTURE)] is set to
(OFF).
j [METERING MODE] is set to
(MULTI).
j [ISO] is set to AUTO.
j HX-WA20
PICTURE SIZE:
or 12 M setting is disabled.
(
setting is changed to
setting and 12 M setting is changed
to 8.3M setting)
[EXPOSURE] is set to
(PROGRAM).
j The field of view of the recorded still picture is smaller than the range
visible on the recording screen.
HX-WA20

/ HX-WA2

[ISO]
[MENU]:

# [ISO] # desired setting

≥ Please see below. ( HX-DC2 [ISO])
3

RECORDING MENU 3

HX-DC2

[ISO]
Although, with the default settings, the ISO sensitivity is set automatically
in accordance with the brightness of the subject, the ISO sensitivity can
be fixed.
[MENU]:

# [ISO] # desired setting

AUTO:

ISO sensitivity is set automatically.

50:

Sets the sensitivity to ISO 50.

100:

Sets the sensitivity to ISO 100.

100 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

101 ページ

２０１２年２月１４日 火曜日 午後５時１０分

200:

Sets the sensitivity to ISO 200.

400:

Sets the sensitivity to ISO 400.

800:

Sets the sensitivity to ISO 800.

1600:

Sets the sensitivity to ISO 1600.

HX-WA20

3200:

Sets the sensitivity to ISO 3200.

≥ The displayed ISO display value is the default output sensitivity.
≥ The higher the ISO sensitivity, the greater the capability of the unit to
record with fast shutter speeds and in dark environments. However, a
higher sensitivity may also mean more noise in the recorded image
and a more grainy image.
≥ [SCENE MODE] will be set to
(OFF) when the [ISO] is set to other
than AUTO while the [SCENE MODE] (l 90) is set to
(FIREWORKS),
(HDR (Backlight Comp.)),
(HANDHELD
NIGHT SHOT) ( HX-WA20 only), or
(LOW LIGHT).
≥ HX-WA20
Slow Motion Mode (l 81) is set to off.
≥ If you register a shortcut function (l 103) to the SET button, you can
change the ISO sensitivity setting from the recording screen.

[WHITE BALANCE]
Please refer to page 108.
HX-WA20

[EXPOSURE]
Please refer to page 110.

VQT4F46 101

HX-WA20PPPCPU-VQT4F46_mst.book

102 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[FACE CHASER]
The detected face is displayed in the frame.
[MENU]:

# [FACE CHASER] # [

(ON)]

∫ About prioritized face framing
The prioritized face frame is displayed in
yellow. When the unit is set to Portrait mode
in Intelligent Auto Mode, the unit will focus
on the prioritized face frame and adjust the
brightness accordingly.
≥ The gray frames are for face detection only.
≥ When you press the
button halfway while recording still pictures,
the unit focuses on the prioritized frame. When focus is achieved, the
prioritized frame turns green.
≥ A maximum of 15 frames are detected, with the frames near the center
of the screen and large frames being prioritized.
≥ For still pictures with detected faces,
is displayed on the 1-file
thumbnail display. (l 66)
≥ If the subject is small or dark on the LCD monitor, the unit may not be
able to detect it.
≥ [SCENE MODE] will be automatically set to
(OFF) when the
[FACE CHASER] is set to
(ON) while the [SCENE MODE] (l 90)
is set to
(FIREWORKS),
(LANDSCAPE), or
(NIGHT
SCENERY).
≥ [FOCUS MODE] (l 98) is set to
(9-PT AUTOFOCUS) and
[METERING MODE] (l 98) is set to
(MULTI).
≥ Face detection is disabled when using burst recording or panorama
still picture recording.
≥ When [FOCUS] (l 112) is set to
(MANUAL), Auto focus is
disabled.
≥ When it is set to [ISO] (l 100) or [EXP COMPENSATION] (l 106),
the brightness may not be adjusted.
≥ HX-WA20
When [FACE CHASER] is set to
(ON), Slow Motion Mode (l 81) is
set to off.
≥ HX-WA20
When [EXPOSURE] (l 110) is set to
(SHUTTER),
(APERTURE) or
(MANUAL), the brightness is not adjusted.

102 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

103 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[E.I.S.(VIDEO)]
Please refer to page 80.

[E.I.S.(PICTURE)]
Please refer to page 80.

[SHORTCUTS]
This setting registers the functions (shortcut functions) performed when
the SET button is tipped up, down, left and right with the recording screen
displayed.
[MENU]:
1

# [SHORTCUTS]

Select the destination (up, down, left or right on the SET button)
for the function using the SET button and press the SET button.
/ / / :
Functions are registered individually to up, down, left and right of the
SET button.
RECOMMENDED SETTINGS:
Regular functions are automatically registered.

VQT4F46 103

HX-WA20PPPCPU-VQT4F46_mst.book

104 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select the function to register using the SET button, and press
the SET button.
(AF LOCK):
Locks the focus. (l 105)
(AE LOCK):
Locks the exposure. (l 105)
(FOCUS):
Sets the focus. (l 112)
(Can be registered to

and

only)

(FLASH):
Sets the flash operation. (l 96)
+ - (EXP COMPENSATION):
Corrects the exposure. (l 106)

ISO (ISO):
Sets the ISO sensitivity. (l 100)
Ø(SELF TIMER):
Sets the self-timer. (l 97)
HX-WA20

(EXPOSURE):
Sets the shutter speed and the iris value. (l 110)
(PHOTO VIEW):
Sets photo view. (l 107)
[OFF]:
Shortcut functions are not registered.
≥ To continue and register other functions, repeat Steps 1 and 2.
3 Press the MENU button.
≥ A confirmation screen for the shortcut
settings appears.
4 Press the MENU button to complete
the settings.
5 Tilt the SET button in the direction in
which you registered the function.
≥ Each tip of the SET button changes the registered function setting.
≥ To confirm the shortcut settings, press the MENU button on the screen
in Step 1. A confirmation screen appears.

104 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

105 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ AF lock
If you register AF lock as a shortcut function (l 103), you can record with
the focus locked.
≥ Register the shortcut function. (l 103)
Tilt the SET button in the direction to which you registered AF lock.
≥
will appear on the LCD monitor.
≥ When [FOCUS] is set to
(MANUAL), AF Lock is disabled.
≥ The AF lock setting is canceled if any of the following operations are
performed.
j Setting playback mode
j If [SCENE MODE] is set to
(FIREWORKS)
j If the [FOCUS] setting is changed
j Turning off the unit
j Setting standby mode
j HX-WA20
Setting Slow Motion Mode

∫ AE lock
If you register AE lock as a shortcut function (l 103), you can record
with the exposure locked.
≥ Register the shortcut function. (l 103)
Tilt the SET button in the direction to which you registered AE lock.
≥
will appear on the LCD monitor.
≥ The AE lock setting is canceled if any of the following operations is
performed.
j Setting playback mode
j If the [SCENE MODE] setting is changed
j If [COLOR MODE] is set to
(HDR (Paint))
j If the [ISO] setting is changed
j If the [WHITE BALANCE] setting is changed
j If the [EXP COMPENSATION] setting is changed
j Turning off the unit
j Setting standby mode
j HX-WA20
Setting Slow Motion Mode
If the [EXPOSURE] setting is changed

VQT4F46 105

HX-WA20PPPCPU-VQT4F46_mst.book

106 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Exposure compensation
If you register exposure compensation as a shortcut function (l 103),
you can record with altered brightness.
≥ Register the shortcut function (l 103)
1 Tilt the SET button in the direction to which you registered the
exposure compensation.
≥ The exposure compensation bar is displayed.
2 Tilt the SET button to the left or right to correct the exposure.

0

≥ The exposure compensation value is displayed to the left side of the
exposure compensation bar.
≥ The exposure compensation value can be corrected in the range –1.8
to +1.8.
≥ The exposure compensation bar disappears when the SET button is pressed.
≥ The exposure setting is canceled if any of the following operations is
performed.
j Setting the pointer to n 0
j Setting playback mode
j Changing the [SCENE MODE] settings
j Turning off the unit
j Setting standby mode
j HX-WA20
Setting Slow Motion Mode

106 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

107 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-WA2

[PHOTO VIEW]
[MENU]:

# [PHOTO VIEW] # desired setting

≥ Please see below. ( HX-WA20 / HX-DC2 [PHOTO VIEW])
4

RECORDING MENU 4

HX-WA20

/ HX-DC2

[PHOTO VIEW]
Selects the desired field of view (photo view or video view) for the
recording standby screen display. When photo view is selected, a frame
to show the field of view during video recording appears.
[MENU]:

# [PHOTO VIEW] # desired setting

(ON): Photo view

(OFF): Video view



A Video recording area
≥ If you register a shortcut function (l 103) to the SET button, you can
change the photo view setting from the recording screen.

[ZOOM MODE]
Please refer to page 78.

VQT4F46 107

HX-WA20PPPCPU-VQT4F46_mst.book

108 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[WIND CUT]
This is for reducing the wind noise coming into the built-in microphones.
[MENU]:

# [WIND CUT] # [

(ON)]

≥ This function’s default setting is [
(ON)].
≥ You may not see the full effect depending on the recording conditions.

[AUTO REVIEW]
Sets the period for which the recorded image appears on the LCD
monitor after the
button is pressed.
[MENU]:

# [AUTO REVIEW] # desired setting

1 (1sec):

Still pictures are displayed for approximately
1 second after being recorded.

2 (2sec):

Still pictures are displayed for approximately
2 seconds after being recorded.

(OFF):

Still pictures are not displayed after being recorded.

Advanced (Recording)

Manual recording
White Balance
Automatic White Balance function may not reproduce natural colors
depending on the scenes or lighting conditions. If so, you can adjust the
White Balance manually.

Select the menu.

[MENU]:

108 VQT4F46

# [WHITE BALANCE]

HX-WA20PPPCPU-VQT4F46_mst.book

109 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select the white balance using the SET button, and
press the SET button.
(AUTO):

The unit distinguishes the weather and
lighting at the recording location and
automatically adjusts the white balance.
(Auto)

(SUNNY):

Outdoors under a clear sky

(CLOUDY):

Outdoors under cloudy sky

(INDOOR 1):

Incandescent light, video lights like in the
studio, etc.

(INDOOR 2):

Color fluorescent lamps, sodium lamps in
gymnasiums, etc.

(WHITE SET):

≥ Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥ Lights used for wedding receptions at
hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.

≥ To return to auto setting, select

(AUTO).

∫ To set the White Balance manually
1 Point the unit at a white subject that fills the screen.
2 Select the
(WHITE SET) and press the SET button.
≥ The LCD monitor display will go dark for a moment and then return to
the recording menu. When the
icon appears on the recording
menu, the white balance has been set.
≥ When the brightness changes or the recording location changes and
the color balance is no longer correct, check whether the white balance
setting is suitable for the light source.
≥ HX-DC2
If you turn on the unit with the lens cap still fitted, the auto white
balance will not be set correctly. Always remove the lens cap before
turning on the unit.
≥ [SCENE MODE] will be set to
(OFF) when the [WHITE BALANCE]
is set to other than
(AUTO) while the [SCENE MODE] (l 90) is set
to
(BEACH),
(SUNSET), or
(FIREWORKS).
VQT4F46 109

HX-WA20PPPCPU-VQT4F46_mst.book

110 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Manual shutter speed/iris adjustment
[HX-WA20]
Shutter speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.

Select the menu.

[MENU]:

# [EXPOSURE]

Select an exposure mode using the SET button and
press the SET button.
(PROGRAM):

Exposure is set automatically.

(SHUTTER):

Set the shutter speed.

(APERTURE):

Set the iris value.

(MANUAL):

Set the shutter speed and the iris value.

(On selecting

(MANUAL))

Tilt the SET button up/down to select shutter speed
or iris value, and tilt left and right to set.
(On selecting

(SHUTTER) or

(APERTURE))

Tilt the SET button left or right to set.




F2.8
1/250

Press the SET button.

A F2.8: Iris value:
F2.8 ... !"""""# ... F8.0
≥ Value closer to F8.0 darken the image.
≥ Value closer to F2.8 brighten the image.

110 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

111 ページ

２０１２年２月１４日 火曜日 午後５時１０分

B 1/250: Shutter speed:
2 (2 seconds) to 1/1000 (1/1000 second)
≥ The shutter speed closer to 1/1000 is faster.
≥ To restore automatic settings, press the
button.
≥ When setting both the shutter speed and the iris value, set the shutter
speed and then set the iris value.
≥ When
(SHUTTER),
(APERTURE) or
(MANUAL) are set,
the following functions are disabled and cannot be used.
j [PANORAMA], [SCENE MODE],
(HDR (Paint)) in [COLOR
MODE] and Slow Motion Mode
≥ When you allocate a shortcut function (l 103) to the SET button with
(SHUTTER),
(APERTURE) or
(MANUAL) set, you can
change the
(SHUTTER),
(APERTURE) or
(MANUAL)
setting from the recording screen.
Manual shutter speed adjustment
≥ When recording with a slow shutter speed, attach the unit to a tripod
etc. to prevent camera shake.
≥ You may see a band of light around an object that is shining very
brightly, or is highly reflective.
≥ During normal playback, image movement may not look smooth.
≥ If you record an extremely bright object or record under indoor lighting,
color and screen brightness may change or a horizontal line may
appear on the screen. In this case, record in the Intelligent Auto Mode
or set the shutter speed to 1/60 in areas where the power supply
frequency is 60 Hz, or 1/100 in areas of 50 Hz.
≥ With a slow shutter speed, you can record in darker locations but may
find that noise increases in the recorded images.
≥ With burst recording, the shutter speed is faster than 1/30.
≥ With motion picture recording, the shutter speed will be automatically
set to 1/30 if you set it to a value less than 1/30.
Manual iris adjustment
≥ Depending on the zoom magnification, there are iris values that are not
displayed.

VQT4F46 111

HX-WA20PPPCPU-VQT4F46_mst.book

112 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Setting the focus and recording
Set the focus in accordance with the distance to the subject.

Select the menu.

[MENU]:

# [FOCUS] # desired setting

Select the item to set using the SET button and press
the SET button.
(AUTO):

The focus is set automatically.

(MANUAL):

Adjusts the focus manually when it is difficult
to achieve focus automatically.

(MACRO):

Select when recording a subject from close
range.

∫ Using manual focus
1

Select
(MANUAL) and press the
SET button.
≥ The bar for setting the focus appears.
2 Tilt the SET button left or right to set
the focus, and press the SET button.
≥ Set the focus and return to the recording
screen.
≥ When focus is set to
(MANUAL) or
(MACRO), the
[PANORAMA] and [SCENE MODE] functions are set to
(OFF).
≥ Even with a setting of
(MANUAL) or
(MACRO), if you set the
[PANORAMA] and [SCENE MODE] to a setting other than
(OFF),
the focus setting is set to
(AUTO).
≥ When you set the focus to
(MACRO), start with the zoom set to
Wide (W).
≥ If you register a shortcut function (l 103) to the SET button, you can
change the focus setting from the recording screen.
≥ In certain cases, it may be difficult to achieve focus automatically.

112 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

113 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Playback)

Playback Operations
Playback using operation icon
For details on the basic playback operations, refer to page 64.
Playback
operation

SET button/
Playback
display

During
Playback
Fast
forward/
rewind
playback

Operating steps

Tilt the SET button to the right
during playback for fast-forward
playback (tilt to the left for rewind
playback).
≥ Each tip of the SET button changes
the playback speed. (Maximum 15k
normal speed)
≥ Tilt the SET button in the opposite
direction during forward winding or
rewinding to slow the winding speed.
≥ Press the SET button to restore
normal playback.

VQT4F46 113

HX-WA20PPPCPU-VQT4F46_mst.book

Playback
operation

Slowmotion
playback

SET button/
Playback
display

During Pause

114 VQT4F46

２０１２年２月１４日 火曜日 午後５時１０分

Operating steps

With the playback paused, tilt and
hold the SET button to the right for
slow motion playback until release
(tilt and hold to the left for reverse
slow motion playback).
≥ Press the SET button to restore
normal playback.
With playback paused, tilt the SET
button to the right (tilt to the left for
reverse frame-by-frame playback)
≥ Reverse frame-by-frame playback
will be in 1 second interval (
,
,
,
, and
) or
0.5 second interval (
).
≥ Press the SET button to restore
normal playback.

Frameby-frame
playback
The
motion
picture is
advanced
one frame
at a time.

Scroll
playback

114 ページ

During stop/
during pause

Press the SET button during the
display of the panorama still picture
≥ When playing back a horizontal
panorama still picture, the playback
scrolls from left to right.
≥ When playing back a vertical
panorama still picture, the playback
scrolls from down to up.
≥ Pressing the SET button again to
pause the scroll playback.

HX-WA20PPPCPU-VQT4F46_mst.book

115 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still
picture. The picture size of the still picture to be created will differ
depending on the recording mode of the recorded motion picture.

Pause at the location to be saved as a still picture
during the playback.

≥ You may find it convenient to use slow motion playback and frame-byframe playback here.

2
3

Press the

button fully.

Select the aspect ratio of the still picture to be saved
and press the SET button.
Aspect ratio
16:9

Recording mode

Picture size

1920k1080

1280k720
960k540

*/
4:3

*/
*

1920k1440

1280k960
960k720
640k480

* White bands will be recorded at the top and bottom of still pictures.
≥ Date the motion picture was recorded will be registered as date of the
still picture.
≥ Quality will be different from the normal still picture.
≥ When creating a still picture from a recorded motion picture in
recording mode, [16:9] cannot be selected.
≥ The still picture is saved with a new image number.

VQT4F46 115

HX-WA20PPPCPU-VQT4F46_mst.book

116 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Cutting out a section of a panorama still
picture
You can cut out and save a section of a panorama still picture you have
recorded.

1
2

Display the panorama still picture.

Press the SET button to pause at the section you
wish to cut out.

Press the

Press the SET button to start scroll playback of the
panorama still picture.

button.

≥ The cut-out still picture is saved with picture size of 1280k720.
≥ The date and time of the recording of the panorama still picture are
stored as the date and time of the cut-out picture.
≥ The cut-out still picture is saved with a new image number.

116 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

117 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Zooming in on a still picture during
playback (Playback zoom)
You can zoom in on still pictures during playback.

Operate the zoom button ( HX-WA20 /
HX-WA2 ) or zoom lever ( HX-DC2 ) to
side.

≥ You can zoom in to a maximum of 72k (7200%)
( HX-WA20 ) or 68k (6800%) ( HX-WA2 /
HX-DC2 ). (The maximum zoom magnification
differs according to the size of the still picture)
≥ The unit zooms in on the central portion of the image.
≥ If the still picture has been recorded using face detection (l 102), the
unit zooms in on the detected face.
≥ When you zoom in on a rotated still picture with a 4:3 or 16:9 aspect
ratio, the still picture before rotation is displayed. With a panorama still
picture, the rotated picture is displayed. (l 122)
≥ The more a picture is enlarged, the more its quality deteriorates.

190%

Shift the position of
the zoomed portion
using the SET button.
T
W

SET

100%

Zooming out from the zoomed still picture
Operate the zoom button ( HX-WA20 / HX-WA2 ) or zoom lever ( HX-DC2 )
to
side to zoom out.
Press the SET button to restore the normal display (100%) screen.

∫ Saving the zoomed still picture
Press the
button while zoomed in.
≥ The rotation information is retained for the 4:3 and 16:9 rotated still
pictures. The rotation information is not retained for the panorama still
picture, but rotated still picture is saved.
≥ In the case of still pictures recorded using face detection, the face
detection data is not retained.
≥ The date and time of the recording of the original still picture are stored
as the date and time of any picture stored after zooming.
VQT4F46 117

HX-WA20PPPCPU-VQT4F46_mst.book

118 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Playback)

Various playback functions
Changing the playback settings and
playing back the slide show
≥ Set to Playback mode. (l 47)
[MENU]:

1 # [SLIDESHOW] # desired setting

Select the item to set using the SET button and press
the SET button.

[MODE]:
Select the type ([ALL]/[VIDEO]/[PICTURE]) of the file to play back.
[SLIDES INTERVAL]*1:
Select the display interval for still picture playback.
[EFFECT SETUP]*1:
Select the effects for still picture playback.
[MUSIC SELECT]*2:
HX-WA20

Select the music for still picture playback or playback of motion picture
recorded in Slow Motion Mode.
HX-WA2 / HX-DC2
Select the music for still picture playback.
[START]:
Start the slide show.
*1 These settings are only available when [ALL] or [PICTURE] has
been selected in [MODE].
*2 HX-WA20
This setting is available when any type ([ALL]/[VIDEO]/[PICTURE])
has been selected in [MODE].
HX-WA2 / HX-DC2
These settings are only available when [ALL] or [PICTURE] has
been selected in [MODE].

118 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

119 ページ

２０１２年２月１４日 火曜日 午後５時１０分

(On selecting [MODE])

Select the type of file to play back using the SET
button and press the SET button.
(On selecting [SLIDES INTERVAL])

Select an item using the SET button and press the
SET button.
[SHORT]:

approx. 1 second

[NORMAL]:

approx. 5 seconds

[LONG]:

approx. 15 seconds

(On selecting [EFFECT SETUP])

Select the desired effect using the SET button and
press the SET button.
≥ [EFFECT SETUP] is disabled for the playback of panorama still
pictures.

(On selecting [MUSIC SELECT])

Select the desired music using the SET button and
press the SET button.
≥ When you are playing back scenes/audio files, the audio of the scenes/
audio files is played back without music.
HX-WA20

Playback of motion pictures recorded in Slow Motion Mode is
accompanied by music selected in [MUSIC SELECT].

Select [START] using the SET button and press the
SET button.

≥ Panorama still pictures are played back as follows.
j Horizontal panorama still picture: the playback scrolls from left to
right.
j Vertical panorama still picture: playback scrolls from down to up.
≥ To adjust the volume during a slideshow, operate the volume button
( HX-WA20 / HX-WA2 ) or volume lever ( HX-DC2 ). (l 66)
≥ During playback, the slideshow will stop if you perform any operation
except operations on the volume button ( HX-WA20 / HX-WA2 ) or
volume lever ( HX-DC2 ).
VQT4F46 119

HX-WA20PPPCPU-VQT4F46_mst.book

120 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Displaying file information
You can display the information of files recorded with the unit.
≥ Set to Playback mode. (l 47)

Using the SET button, select file for which to display
information.

Press and hold down the MENU button for 1 second
or more.

≥ To make the information disappear, press the MENU button.














1 Recording mode
Recording format
2 Recording start time and date
3 File number
4 Protection setting
5 File size
6 Recording time
7 Recording media

1
2

3


4




5
6
7
8
9

120 VQT4F46

Picture size
Scene mode
Color mode
IRIS: Aperture
SHUTTER: Shutter speed
EXPOSE: Exposure correction
ISO: ISO sensitivity
Recording start time and date
File number
Protection setting
File size
Recording media

HX-WA20PPPCPU-VQT4F46_mst.book




121 ページ







２０１２年２月１４日 火曜日 午後５時１０分

1 Recording mode
Recording format
2 Recording start time and date
3 File number
4 Protection setting
5 File size
6 Recording time
7 Recording media

VQT4F46 121

HX-WA20PPPCPU-VQT4F46_mst.book

122 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Playback)

Using the playback menu
≥ Set to Playback mode. (l 47)
≥ Select the menu. (l 68)
[MENU]:

1 or

2 # desired setting

PLAYBACK MENU 1

[SLIDESHOW]
Please refer to page 118.

[PLAY VOLUME]
Sets the playback volume for scene and audio files.
Tilt the SET button right or left and press the SET button.

[PROTECT] or
[TRANSFER/PROTECT]
Please refer to page 131 for details about protection setting.
Please refer to page 167 for details about selective forwarding.

[DELETE]
Please refer to page 128.

[ROTATE]
You can rotate still pictures.
1 Select the still picture to rotate using the thumbnail screen.
≥ Move the yellow frame over the still picture you wish to rotate.

122 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

123 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select the menu.
1 # [ROTATE] # [RIGHT] or [LEFT]

[MENU]:

≥ To rotate another still picture, tilt the SET button left and right to select
a still picture, select [RIGHT] or [LEFT], and press the SET button.
3 Press the MENU button to complete the settings.
≥ The still picture cannot be rotated if it has been protected. Turn off the
protection before the rotation operation. (l 131)

[RESIZE]
You can reduce the size of the still picture and save as a new still picture.
1 Select the still picture to resize using the thumbnail screen.
≥ Move the yellow frame over the still picture you wish to resize.
2 Select the menu.
1 # [RESIZE] # desired setting

[MENU]:

Size of original image

Resize setting

HX-WA20

/
HX-WA2

1600k1200
/

/ HX-DC2
/
/

640k480
*

HX-WA20

12 M / 8.3M /
HX-WA2

Size after resizing

1920k1080

/ HX-DC2
/
/

0.9M

1280k720

≥ The resized still picture is saved with a new image number.
≥ Still picture with picture size of
and panorama still picture cannot
be resized.
* Cannot be selected when the size of the original image is
.

VQT4F46 123

HX-WA20PPPCPU-VQT4F46_mst.book

124 ページ

２０１２年２月１４日 火曜日 午後５時１０分

PLAYBACK MENU 2

[RED-EYE CORRECT.]
Corrects eye color when they appear red in still pictures (red-eye
phenomenon). When [SAVE AS NEW] is set, the still picture is saved
with a new image number.
1 Select the still picture to undergo red-eye correction using the
thumbnail screen.
≥ Move the yellow frame over the still picture which is to undergo red-eye
correction.
2 Select the menu.
[MENU]:

2 # [RED-EYE CORRECT.] # [CORRECTION]

≥ A correction confirmation screen appears. Check the correction
location, which is surrounded by a red frame, and press the SET
button.
3 Select the saving method and press the SET button.
[SAVE AS NEW]:

The corrected still picture is saved as a new still
picture.

[OVERWRITE]:

The original still picture is deleted and only the
corrected still picture is saved.

≥ Red-eye cannot be corrected in panorama still pictures or still pictures
recorded with [COLOR MODE] set to
(HDR (Paint)).
≥ Because the unit automatically corrects the portion it recognizes as
requiring correction, it may not always make the correction correctly.

[EDIT VIDEO]
You can cut unwanted sections from scenes. (scene splitting) You can
also splice multiple scenes together. (Scene splicing)

∫ Splitting a scene
1 Select the scene to split using the thumbnail screen.
≥ Move the yellow frame over the scene you wish to split.

124 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

125 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select the menu.
[MENU]:

2 # [EDIT VIDEO] # [

(SPLIT)]

Specify the starting position for the
scene.
≥ Play back to near the position where you
wish the scene to start, then pause
playback and specify the starting position
precisely using frame-by-frame playback.
The pause position will be the starting position of the scene.
≥ If you wish the split scene to start from the beginning of the scene, go
to Step 4.
Operations
Play back

With the unit paused, tilt the SET button to the
right for approximately 2 seconds to play back
normally, and to the left to play back in the
reverse direction.

Pause

During playback, press the SET button.

Fast forward/
rewind

During playback, you can change the playback
speed by tilting the SET button right or left.

Frame-by-frame

With the unit paused, tilt the SET button to the
right to advance frame-by-frame, and to the left
to reverse frame-by-frame.

4 Tilt the SET button up.
5 Specify the end position for the scene.
≥ The screen for specifying the end position of the scene appears.
≥ Set the end position by performing the same operations as when
setting the start position.
≥ The portions displayed in green are saved.
≥ If you wish to splice a preceding section to
a subsequent section, tilt the SET button
down. Each downward tilt of the SET
button changes the section to be deleted.
6 Press the
button or the
recording start/stop button.
VQT4F46 125

HX-WA20PPPCPU-VQT4F46_mst.book

126 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select a saving method using the SET button and press the SET
button.
[SAVE AS NEW]:

The split scene is saved as a new scene.

[OVERWRITE]:

The original scene is deleted and only the split
scene is saved.

[REVIEW CLIP]:

The scene is played back in the split state.

∫ Scene splicing
1

Select the menu.
[MENU]:

2 # [EDIT VIDEO] # [

(SPLICE)]

Move the yellow frame over the scenes you wish to splice and
press the SET button.

≥ Scenes recorded using different recording
1
2
modes cannot be spliced.
≥ The scenes you select for splicing are
assigned numbers.
≥ You can continue selecting up to maximum
of 9 scenes.
≥ The scenes are spliced in numerical order according to the assigned
numbers.
≥ To cancel a selection, press the SET button again.
3 Press the
button or the recording start/stop button.
4 Select a saving method using the SET button and press the SET
button.

126 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

127 ページ

２０１２年２月１４日 火曜日 午後５時１０分

[SAVE AS NEW]:

The spliced scenes are saved as a new scene.

[OVERWRITE]:

The spliced scene is saved by writing over the
file you initially selected.

[REVIEW CLIP]:

The scene resulting from the splicing is played
back.

≥ Do not turn off the unit during motion picture editing process. If the unit
is turned off, there is a risk that the edited files and original files will be
lost.
≥ When editing ends, the unit returns to thumbnail display.
≥ If the total size of the file exceeds 4 GB, you cannot splice.
≥ If the original scene is protected, you cannot overwrite it when saving.
≥ Audio files cannot be split or spliced.
≥ To adjust the volume during a playback review, operate the volume
button ( HX-WA20 / HX-WA2 ) or volume lever ( HX-DC2 ). (l 66)
≥ When editing long motion pictures, the processing will take longer due
to the time it takes to process large files. When editing scenes on the
unit, make sure that the battery does not run out during the processing
by using a battery with sufficient charge on it or the AC adaptor.
≥ For editing long scenes, we recommend using a PC (HD Writer VE
2.0).
≥ It may not be possible to split short scenes.
≥ The actual splitting point may differ slightly from the specified position.

[COPY]
Please refer to page 142.

[UPLOAD SET]
Please refer to page 163.

VQT4F46 127

HX-WA20PPPCPU-VQT4F46_mst.book

128 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Playback)

Deleting scenes/still pictures/
audio files
When an SD card is inserted, the files and folder on the SD card are
deleted. When not inserted, the files and folders in the built-in memory
are deleted.
Deleted scenes/still pictures/audio files cannot be restored, so
perform appropriate confirmation of the contents before
proceeding with deletion.

Deleting displayed file
≥ Set to Playback mode. (l 47)
≥ Switch from thumbnail display to 1-file display. (l 66)

Select the file to delete using the SET button.

2
3

Tilt the SET button up.
Select [DELETE] using the SET button and press the
SET button.

Deleting multiple files at once
≥ Set to Playback mode. (l 47)

Select the menu.

[MENU]:

128 VQT4F46

1 # [DELETE]

HX-WA20PPPCPU-VQT4F46_mst.book

129 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Using the SET button, select [DELETE SELECTED],
[DELETE ALL] or [DELETE FOLDER] and press the
SET button.

∫ Deleting selected files

(When [DELETE SELECTED] is selected in Step 2)

Select the file to delete using the SET button and
press the SET button.
≥

will appear on the selected file. To cancel, press the SET button
again.
≥ You can continue selecting up to maximum of 100 files.

Press the
button.

button or the recording start/stop

≥ A delete confirmation screen appears.

Select [YES] using the SET button and press the SET
button.

≥ The selected files are deleted.

∫ Deleting all files

(When [DELETE ALL] is selected in Step 2)

Select [DELETE] using the SET button and press the
SET button.
≥ A delete confirmation screen appears.

Select [YES] using the SET button and press the SET
button.

≥ All the files will be deleted.

VQT4F46 129

HX-WA20PPPCPU-VQT4F46_mst.book

130 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Deleting a folder

(When [DELETE FOLDER] is selected in Step 2)

Select the folder to delete using the SET button and
press the SET button.
≥ A delete confirmation screen appears.

Select [YES] using the SET button and press the SET
button.

≥ A further confirmation screen appears. Select [YES] and press the SET
button to delete the folder.
≥ Files which cannot be played back (the thumbnails are displayed as
) cannot be deleted.
≥ The deletion may take time if there are many files.
≥ If you delete scenes recorded on other products or still pictures
conforming to DCF standard with this unit, all the data related to the
scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are
deleted, a still picture (other than JPEG) that cannot be played back on
this unit may be erased.
≥ Files which are protected cannot be deleted. To delete a protected file,
first remove the protection and then delete. (l 131)

130 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

131 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Protecting a file
Files can be protected so that they are not deleted by mistake. (Even if
you protect some files, formatting the media will delete them.)
≥ Set to Playback mode. (l 47)

Select the menu.

[MENU]:

*
1 # [PROTECT]

* When you are using an Eye-Fi card which has already been set to
selective forwarding with a PC, [TRANSFER/PROTECT] is displayed.

≥
≥

Select the file you wish to protect using the SET
button and press the SET button.

appears. To cancel the selection, press the SET button again.
is displayed on the thumbnail for 1 file. (l 66)

Press the MENU button to complete the settings.

VQT4F46 131

HX-WA20PPPCPU-VQT4F46_mst.book

132 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Playback)

Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible
with the terminals. Image quality may vary with the connected
terminals.
A High quality
1 HDMI
terminal
2 Video
terminal
≥ Always use the supplied AV cable.
≥ HDMI is the interface for digital devices. If you connect this unit to a
HDMI compatible high definition TV and then play back the recorded
high-definition images, you can enjoy them in high resolution with high
quality sound.
≥ Turn down the volume before connecting.

Connect this unit to a TV.

HX-WA20

/ HX-WA2



132 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

133 ページ

２０１２年２月１４日 火曜日 午後５時１０分

B HDMI micro cable (optional)
≥ Be sure to connect to the HDMI terminal.
C AV cable (supplied)
Picture quality
1 High-definition images when connecting to HDMI terminal
2 Standard images when connecting to video terminal
Cables
B HDMI micro cable
(optional)

Reference items
≥ Connecting with an HDMI micro cable/
HDMI mini cable (l 137)
≥ Playback using VIERA Link™ (l 138)

HX-DC2





D HDMI mini cable (optional)
≥ Be sure to connect to the HDMI terminal.
E AV cable (supplied)
Picture quality
1 High-definition images when connecting to HDMI terminal
2 Standard images when connecting to video terminal

VQT4F46 133

HX-WA20PPPCPU-VQT4F46_mst.book

134 ページ

Cables
D HDMI mini cable
(optional)

２０１２年２月１４日 火曜日 午後５時１０分

Reference items
≥ Connecting with an HDMI micro cable/
HDMI mini cable (l 137)
≥ Playback using VIERA Link™ (l 138)

About the status indicator of the unit
≥ While the unit is connected to a television, the status indicator lights
up in orange.
≥ While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the HDMI micro cable ( HX-WA20 / HX-WA2 )/HDMI mini cable
( HX-DC2 ) or remove the battery.
≥ Check that the plugs are inserted as far as they go.
≥ Do not use any other AV cables except the supplied one.
≥ HX-WA20 / HX-WA2
Always use a genuine Panasonic HDMI micro cable (RP-CHEU15:
optional).
HX-DC2

Always use a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30: optional).

Select the video input on the TV.

≥ Example:
Select the [HDMI] channel with an HDMI micro cable ( HX-WA20 /
HX-WA2 )/HDMI mini cable ( HX-DC2 ).
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the
TV. (For more information, please read the operating instructions for
the TV.)

Play back from the unit

≥ The volume cannot be adjusted on the unit. Please adjust the volume
on the TV.

134 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

135 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ HX-WA20 / HX-WA2
If the HDMI micro cable and AV cable are connected at the same time,
output will be prioritized in order of the HDMI micro cable, AV cable.
HX-DC2

If the HDMI mini cable and AV cable are connected at the same time,
output will be prioritized in order of the HDMI mini cable, AV cable.
≥ About the video output
The video output destination varies depending on the status of
the unit.
Connection
cable

AV cable
(supplied)

Video output
destination
LCD monitor
of the unit

TV
SYSTEM
(l 137)

HDMI micro
cable
(optional)

LCD monitor
of the unit

NTSC

—
≤

NTSC

≤

PAL

—

Playback
mode

≤

—

≤

—

≤

—

≤

—

≤

NTSC
PAL
NTSC

HX-DC2

HDMI mini
cable
(optional)

Standing
Recording
by

PAL

TV
HX-WA20
HX-WA2

Recording mode

TV
PAL

≤: Output
—: No output

VQT4F46 135

HX-WA20PPPCPU-VQT4F46_mst.book

136 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ To watch images on a regular TV (4:3) or when both
sides of the images do not appear on the screen
Change the menu setting to display the images correctly. (Check the TV
setting.)
[MENU]:

# [TV OUTPUT] # [TV ASPECT] # [4:3]

Example of images with a [16:9] aspect ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]

[4:3]

≥ If a wide-screen TV is connected, adjust the aspect setting on the TV.
(Refer to the operating instructions of the TV for details.)
Refer to the following support site for information about
Panasonic TVs with an SD card slot for playing back your
pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating
instructions for the TV.

136 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

137 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Connecting with an HDMI micro cable/
HDMI mini cable
Select the desired method of HDMI output.
[MENU]:

# [TV OUTPUT] # [HDMI] #
[AUTO]/[720p]/[1080i]/[480p]

≥ [AUTO] determines the output resolution automatically based on
information from the connected TV.
If the images are not output on the TV when the setting is [AUTO],
switch to the method [720p], [1080i] or [480p] which enables the
images to be displayed on your TV. (Please read the operating
instructions for the TV.)

TV format setting
Set the format of the video signal output from the USB/AV connector.
[MENU]:

# [TV OUTPUT] # [TV SYSTEM] # [NTSC] or [PAL]

[NTSC]:

Outputs NTSC video signals.

[PAL]:

Outputs PAL video signals.

VQT4F46 137

HX-WA20PPPCPU-VQT4F46_mst.book

138 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Advanced (Playback)

Playback using VIERA Link™
What is the VIERA Link (HDAVI Control™)?
≥ VIERA Link™ is a new name for EZ Sync™.
≥ This function allows you to use your remote control for the
Panasonic TV for easy operations when this unit has been
connected to a VIERA Link compatible device using an HDMI micro
cable (optional)/HDMI mini cable (optional) for automatic linked
operations. (Not all operations are possible.)
≥ VIERA Link is a unique Panasonic function built on an HDMI control
function using the standard HDMI CEC (Consumer Electronics
Control) specification. Linked operations with HDMI CEC compatible
devices made by other companies are not guaranteed.
When using devices made by other companies that are compatible
with VIERA Link, refer to the operating instructions for the respective
devices.
≥ This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is
the newest Panasonic version and is also compatible with existing
Panasonic VIERA Link devices. (As of Nov 2011)
≥ Set to Playback mode. (l 47)

Select the menu.

[MENU]:

# [TV OUTPUT] # [VIERA Link] # [ON]

≥ If you are not using VIERA Link, set to [OFF].

Connect this unit to a Panasonic TV compatible with
VIERA Link.

≥ HX-WA20 / HX-WA2
Connect with an HDMI micro cable.
≥ HX-DC2
Connect with an HDMI mini cable.

138 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

HX-WA20

139 ページ

２０１２年２月１４日 火曜日 午後５時１０分

/ HX-WA2



HDMI IN

HX-DC2



HDMI IN

A HDMI micro cable (optional)
B HDMI mini cable (optional)
1 Panasonic TV compatible with VIERA Link
≥ It is recommended to connect this unit to an HDMI terminal other than
the HDMI1 if there are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the
operating instructions for setting the TV etc.)
≥ HX-WA20 / HX-WA2
Always use a genuine Panasonic HDMI micro cable (RP-CHEU15:
optional).
HX-DC2

Always use a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30: optional).

VQT4F46 139

HX-WA20PPPCPU-VQT4F46_mst.book

140 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Operate with the remote control for the TV.

2)






Press the button up, down, left, or right to select a scene or still
picture to be played back, and then press the button in the center to
set it.
2) Activate the operation icons that are displayed on TV screen with the
remote control for the TV.
A Operation icons
B Display operation icons
C Cancel operation icons

∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also
turns off.
Automatic input switching:
If you connect with an HDMI micro cable ( HX-WA20 / HX-WA2 ) or an
HDMI mini cable ( HX-DC2 ) and then turn on this unit, the input channel
on the TV automatically switches to this unit’s screen. If the TV’s power is
in standby status, it will turn on automatically (if [Set] has been selected
for the TV’s [Power on link] setting).
≥ Depending on the HDMI terminal on the TV, the input channel may not
switch automatically. In this case, use the remote control for the TV to
switch the input channel.

140 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

141 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ If you are unsure whether or not the TV and AV amplifier you are using
are compatible with VIERA Link, read the operating instructions for the
devices.
≥ Available linked operations between this unit and a Panasonic TV is
different depending on the types of Panasonic TVs even if they are
compatible with VIERA Link. Refer to the operating instructions of the
TV for the operations that support on the TV.
≥ Operation is not possible with a cable that is not based on the HDMI
standard.

VQT4F46 141

HX-WA20PPPCPU-VQT4F46_mst.book

142 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Copy/Dubbing

Copying from Built-in Memory to
SD card
Files recorded using the unit can be copied from the built-in memory to
an SD card inserted into the unit.

Copying

Set to Playback mode. (l 47)

≥ Be sure to use a sufficiently charged battery or the AC adaptor.

Select the menu.

[MENU]:

2 # [COPY] # desired setting

[COPY SELECTED]:
Copies the selected file to the SD card.
[COPY ALL]:
Copies all files recorded in the built-in memory to the SD card.

(On selecting [COPY SELECTED])

Select the file to copy using the SET button and
press the SET button.
≥

will appear on the selected file. To cancel, press the SET button
again.
≥ You can continue selecting up to maximum of 100 files.
≥ Press the MENU button to return to the previous step.

(On selecting [COPY ALL])

Select [COPY ALL] to begin copying to the SD card.

(On selecting [COPY SELECTED])

Press the recording start/stop button or the
button.
≥ When the copying ends, the unit returns to the playback menu.

142 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

143 ページ

２０１２年２月１４日 火曜日 午後５時１０分

If you intend to delete the original file when the copying has
finished, always play back the copied file before deletion to
confirm that the original has been copied normally.
≥ You cannot change the order of the files that are to be copied.
Copy/Dubbing

Dubbing images onto other video
devices
You can dub by connecting an AV cable.
≥ Be sure to use a sufficiently charged battery.
≥ Images are dubbed in standard quality.
HX-WA20

Change the video input
on the video device and
TV that this unit is
connected to.

HX-WA2

HX-DC2



≥ The channel set will differ
depending on the terminal to
which the unit is connected.
≥ See the operating
instructions of the video
device for details.
≥ Insert the plugs as far as
they will go.
≥ Do not use any other AV
cables except the supplied
one.
A AV cable (supplied)

≥ Set to Playback mode. (l 47)
VQT4F46 143

HX-WA20PPPCPU-VQT4F46_mst.book

144 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Connect the unit to the recording equipment and
begin playback on the unit.

≥ If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in playback mode. Check on
the TV screen instead.

Start recording on the connected device.

≥ To stop recording (dubbing), stop playback on this unit after stopping
recording on the recorder.
≥ Even when [DISPLAY] is set to [OFF], the battery icon will be displayed
if the battery runs low. Be sure to use a battery which has been
charged sufficiently.
≥ If the date and time display and function indication are not wanted,
cancel them before dubbing. (l 71)
If the dubbed images are played back on a wide-screen TV, the
images may be stretched vertically.
In this case, refer to the operating instruction of the device you are
connecting to or read the operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.

144 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

145 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

What you can do with a PC
HD Writer VE 2.0
You can copy the motion/still picture data to the HDD of PCs or write to
media such as Blu-ray discs, DVD discs or SD cards using HD Writer VE
2.0, which is the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer VE 2.0 (PDF file) for
details on how to use it.
≥ Scenes edited using the HD Writer VE 2.0 can be played back on the
unit. Note, however, that such scenes cannot be edited on the unit.

∫ Smart wizard
The Smart wizard screen is automatically displayed when you connect
this unit to a PC with HD Writer VE 2.0 installed. (l 155)

Copy to PC:

You can copy motion/still picture data to the HDD
of PCs.

Copy to disc:

You can copy to disc in high-definition picture
quality or conventional standard picture quality
(MPEG2 format).

≥ Select the function you wish to use and follow the on-screen
instructions for easy copying.

VQT4F46 145

HX-WA20PPPCPU-VQT4F46_mst.book

146 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Important Notice
≥ When using an SDXC Memory Card, check the following
support site.

http://panasonic.net/avc/sdcard/information/SDXC.html
≥ When inserting a disc containing recorded motion pictures into
other devices, a message prompting you to format the disc may
be displayed. Do not format the disc, since deleted data cannot
be restored later.

What can be done with the HD Writer VE 2.0

Data
type

Copying data to a PC
Copying to a Blu-ray disc
≥ Motion pictures are converted to high-definition (H.264)
motion pictures.
≥ Motion pictures recorded using
/
cannot be
copied.
≥ HX-WA20
Motion pictures recorded using
/
cannot be
copied.

Motion
picture
and still
picture

Copying in DVD-Video format:
≥ Converted to conventional standard quality (MPEG2
format).
Editing:
Editing motion picture data copied on an HDD of a PC
≥ Title, Transition, Delete partially, Dividing
≥ Converting part of motion picture into still picture
Online sharing:
You can upload motion picture data on the Internet and
share them with your family and friends.

Motion
picture

Playing back on a PC:
Play back the motion picture data in high-definition picture
quality on a PC.
≥ It is possible to play back still pictures on a PC using an image viewer
standard to Windows or commercially available image browsing
software, and copy still pictures to a PC using Windows Explorer.
≥ Please refer to page 162 for details about using a Mac.

146 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

147 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Data cannot be written to the unit from a PC.
≥ Motion pictures that have been recorded on another device
cannot be written to the software supplied with this unit.
≥ Audio files cannot be handled.
≥ When motion picture data is written to and read from the SD card,
correct operation cannot be guaranteed with software other than that
supplied with the unit.
≥ Do not start the software supplied with this unit and other software at
the same time. Close any other software if you start the software
supplied with this unit and close the software supplied with this unit if
you start any other software.

VQT4F46 147

HX-WA20PPPCPU-VQT4F46_mst.book

148 ページ

２０１２年２月１４日 火曜日 午後５時１０分

End User License Agreement
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for the Software defined in this
End User License Agreement (“Agreement”) on condition that you agree
to the terms and conditions of this Agreement.
Article 1 License
Licensee is granted the right to use the software, including the
information recorded or described on the CD-ROM, instruction manuals,
and any other media provided to Licensee (collectively “Software”), but
all applicable rights to patents, copyrights, trademarks and trade secrets
in the Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer, rent, lease, lend or allow
any third party, whether free of charge or not, to use, copy or modify the
Software, except as expressly provided for in this Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the Software in whole or a part
solely for back-up purpose.
Article 4 Computer
Licensee may use the Software only on one computer, and may not use it
on more than one computer. Further, Licensee may not use the Software
for commercial software hosting services.
Article 5 Reverse Engineering, Decompiling or Disassembly
Licensee may not reverse engineer, decompile, or disassemble the
Software, except to the extent either of them is permitted under law or
regulation of the country where Licensee resides. Panasonic, or its
distributors will not be responsible for any defects in the Software or
damage to Licensee caused by Licensee’s reverse engineering,
decompiling, or disassembly of the Software.

148 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

149 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Article 6 Indemnification
The Software is provided “AS-IS” without warranty of any kind, either
expressed or implied, including, but not limited to, warranties of
non-infringement, merchantability and/or fitness for a particular purpose.
Further, Panasonic does not warrant that the operation of the Software
will be uninterrupted or error free. Panasonic or any of its distributors will
not be liable for any damage suffered by Licensee arising from or in
connection with Licensee’s use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to any country the Software in
any form without the appropriate export licenses under regulations of the
country where Licensee resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be automatically terminated
if Licensee contravenes any of the terms and conditions of this
Agreement. In this event, Licensee must destroy the Software and
related documentation together with all the copies thereof at Licensee’s
own expense.
Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5
produced by Microsoft Corporation
(1) Licensee shall use the MICROSOFT SQL SERVER COMPACT 3.5
only when included in the Software, and shall not use the MICROSOFT
SQL SERVER COMPACT 3.5 in any other configuration or method.
Licensee shall not publish the MICROSOFT SQL SERVER COMPACT
3.5 or work around any technical limitations in the MICROSOFT SQL
SERVER COMPACT 3.5.
(2) Licensee shall not use, copy, distribute, regrant for use or otherwise
handle the Software in any way beyond the range of use granted under
Article 9 (1), and shall not conduct operations such as reverse
engineering, decompilation, disassembling, etc. of the MICROSOFT SQL
SERVER COMPACT 3.5.
(3) All rights, including copyright, patent rights etc. relating to the
MICROSOFT SQL SERVER COMPACT 3.5 shall belong to Microsoft
Corporation. Licensee shall not claim any rights related to the
MICROSOFT SQL SERVER COMPACT 3.5 whatsoever.

VQT4F46 149

HX-WA20PPPCPU-VQT4F46_mst.book

150 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

Operating environment
≥ Even if the system requirements mentioned in this owner’s manual are
fulfilled, some PCs cannot be used.
≥ A CD-ROM drive is necessary to install the supplied software
applications. (A compatible Blu-ray disc/DVD writer drive and media
are necessary for writing to a Blu-ray disc/DVD.)
≥ Operation is not guaranteed in the following cases.
j When 2 or more USB devices are connected to a PC, or when devices
are connected through USB hubs or by using extension cables.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
≥ This software is not compatible with Microsoft Windows 3.1,
Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT
and Windows 2000.

∫ Operating environment for HD Writer VE 2.0
PC

IBM PC/AT compatible PC

Windows 7 (32 bit/64 bit) Starter/Home Basic/
Home Premium/Professional/Ultimate (SP1)
Windows Vista (32 bit) Home Basic/Home Premium/
Business/Ultimate (SP2)
Windows XP (32 bit) (SP3)

CPU

Intel Pentium 4 2.8 GHz or higher
(including compatible CPU)
≥ Intel Core 2 Duo 2.16 GHz or higher or
AMD Athlon 64 X2 Dual-Core 5200+ or higher is
recommended when using the playback function.
≥ Intel Core 2 Quad 2.6 GHz or higher is
recommended when using the editing function.
≥ Intel Core i7 2.8 GHz or higher is recommended
when copying to Blu-ray discs.

150 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

151 ページ

２０１２年２月１４日 火曜日 午後５時１０分

RAM

Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit)
Windows Vista: 1 GB or more
Windows XP: 512 MB or more (1 GB or more
recommended)

Display

High Color (16 bit) or more (32 bit or more
recommended)
Desktop resolution of 1024k768 pixels or more
(1920k1080 pixels or more recommended)
Windows 7/Windows Vista: DirectX 9.0c compatible
video card (DirectX 10 recommended)
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express™k16 compatible recommended
Video memory of 256 MB or more recommended

Free hard
disk drive
space

Ultra DMA — 100 or higher
Available hard disk capacity of 450 MB or more for
installation
≥ When writing to DVD/Blu-ray disc/SD, at least twice
the amount of free disk space as the disc or card
being created is necessary.

Sound

DirectSound Support

Interface

USB port [Hi-Speed USB (USB 2.0)]

Other
requirements

Mouse or equivalent pointing device
Internet connection

≥ Supplied CD-ROM is available for Windows only.
≥ Input is not supported in languages other than English, German,
French, Simplified Chinese and Russian.
≥ Operation cannot be guaranteed on all Blu-ray disc/DVD drives.
≥ Operation is not guaranteed on Microsoft Windows Vista Enterprise,
Windows XP Media Center Edition, Tablet PC Edition and Windows 7
Enterprise.
≥ This software is not compatible with a multi-boot environment.
≥ This software is not compatible with a multi-monitor environment.

VQT4F46 151

HX-WA20PPPCPU-VQT4F46_mst.book

152 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ If using Windows XP, only an administrative account user can use this
software. If using Windows Vista/Windows 7, only administrative and
standard account users can use this software. (An administrative
account user should install and uninstall this software.)

∫ To use the HD Writer VE 2.0
You will need a high performance PC depending on the functions to be
used. It may not properly play back or properly operate depending on the
environment of the PC used. Refer to the operating environment and
notes.
≥ Operation during the playback may become slow if the CPU or memory
is not fulfilling the requirements of the operating environment.
≥ Always use the most current driver for the video card.
≥ Always make sure there is enough capacity on the HDD in the PC. It
may become inoperable or the operation may stop suddenly if the
capacity gets low.

152 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

153 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Operating environment for the card reader function
(mass storage)
PC

IBM PC/AT compatible PC

Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)

CPU

Windows 7/Windows Vista: 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor (including
compatible CPU)
Windows XP: Intel Pentium III 450 MHz or higher or
Intel Celeron 400 MHz or higher

RAM

Windows 7: 1 GB or more (32 bit)/2 GB or more
(64 bit)
Windows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Business/Ultimate/
Enterprise: 1 GB or more
Windows XP: 512 MB or more (1 GB or more
recommended)

Interface

USB port

Other
requirements

Mouse or equivalent pointing device

≥ The USB equipment operates with the driver installed as standard in
the OS.

VQT4F46 153

HX-WA20PPPCPU-VQT4F46_mst.book

154 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

Installation
When installing the software, log on to your computer as the
Administrator or with a user name with equivalent authorization. (If you
do not have authorization to do this, consult your manager.)
≥ Before starting the installation, close all applications that are running.
≥ Do not perform any other operations on your PC while the software is
being installed.
≥ Explanation of operations is based on Windows 7.

Insert the CD-ROM into the PC.

≥ The [AutoPlay] screen is displayed automatically. Click [Run setup.exe]
# [Yes].
≥ If Windows 7 is in use, or the [AutoPlay] screen is not displayed
automatically, select [Start] # [Computer] (or double-click on
[Computer] on the desktop), and then double-click [Panasonic].

Click [Yes].

≥ Operate following the instruction on the screen.
≥ Select [NTSC Area] when the country or region of your residency is not
displayed in the selection screen for the country or region.
The PC must be rebooted for the application to work.

∫ Uninstalling HD Writer VE 2.0
Follow the steps below to uninstall any software applications that you no
longer require.

Select [Start] # [Control Panel] # [Uninstall a
program].

Select [HD Writer VE 2.0], then click [Uninstall].

≥ Proceed with the uninstallation by following the on-screen instructions.
≥ After uninstalling the software, be sure to reboot the PC.

154 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

155 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
HX-WA20

HX-WA2



HX-DC2

A USB cable (supplied)
≥ Insert the plugs as far as they will go.

Turn on the unit.

≥ Be sure to use a sufficiently charged battery.
≥ This function is available in all modes.

Connect this unit to a PC.

≥ The USB function selection screen will appear.

Select the desired connection mode using the SET
button and press the SET button.

[CARD READER]:

The unit works as an external drive for the PC.
(Card reader mode) (l 156)

[WEB CAMERA]:

The unit works as a web camera. (Web camera
mode) (l 159)

VQT4F46 155

HX-WA20PPPCPU-VQT4F46_mst.book

156 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ To disconnect USB cable safely
Select the
icon in task tray displayed on the PC, and then click
[Eject Panasonic Camcorder].
≥ Depending on your PC’s settings, this icon may not be displayed.
About the status indicator of the unit
≥ While the unit is connected to a PC, the status indicator lights up in
green.
≥ While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the USB cable or remove the battery.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ When this unit is connected to a PC using a USB cable while the unit is
turned on, power is also supplied from the PC to this unit.
≥ When performing reading/writing between a PC and an SD card, be
aware that some SD card slots built into PCs and some SD card
readers are not compatible with the SDHC Memory Card or SDXC
Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html

Use as a card reader
Connect the unit to a PC and set the unit to card reader
mode. (l 155)
≥ The LCD monitor will turn off.
≥ The Smart wizard screen is automatically displayed when HD Writer
VE 2.0 is installed.
≥ This unit is automatically recognized as an external drive of the PC.
(l 157)
≥ File is read from the SD card if one is inserted or the built-in memory if
no SD card is inserted.
≥ When you select an option other than [CARD READER], reconnect the
USB cable.

156 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

157 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ About the PC display
When the unit is connected to a PC, it is recognized as an external drive.
≥ Removable disk (Example:
) is displayed in
[Computer].
We recommend using HD Writer VE 2.0 to copy motion picture data.
Using Windows Explorer or other programs on the PC to copy, move
or rename files and folders recorded with this unit will result in them
being unusable with HD Writer VE 2.0.
It is impossible to write data to the built-in memory or SD card on this
unit from a PC.
Example folder structure in built-in memory/SD card:

CAM_SD/CAM_MEM
DCIM
100CDPFP



IMGA0001.MP4 
IMGA0002.JPG 
IMGA0003.M4A 


AD_HDWUP

The following data will be recorded.
1 Up to 999 files of motion pictures/still pictures/audio files can
be recorded in a single folder.
If you record further images/audio, a 101CDPFP folder is
created and the files are stored in this new folder. The folders
are numbered 102CDPFP, 103CDPFP...and so on.
2 Recorded scenes
3 JPEG format pictures
4 Recorded audio
5 (SD card (CAM_SD) only)
The upload tool (HD Writer Web Uploader) is automatically copied to
the SD card when WEB upload setting (l 163) is performed.

VQT4F46 157

HX-WA20PPPCPU-VQT4F46_mst.book

158 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Copying your still pictures to your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be copied to the PC with Explorer
or other programs.
1 Double click the folder that contains the still pictures. ([DCIM] #
[100CDPFP] etc.)
2 Drag and drop the still pictures onto the destination folder (on
the PC’s HDD).
≥ Do not delete the SD card’s folders. Doing so may make the SD card
unusable in this unit.
≥ When data not supported by this unit has been recorded on a PC, it will
not be recognized by this unit.
≥ Always use this unit to format SD cards.

∫ Charging the battery by connecting it to different
devices
If you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder using a USB cable, the battery will
charge.
≥ Insert the USB cable securely all the way. It will not operate properly if
it is not inserted all the way.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or
DVD recorder.
≥ If you do not intend to use the unit for an extended period, disconnect
the USB cable from the unit for safety.
≥ During charging, the status indicator flashes red.
≥ If the status indicator flashes fast and then goes off or stays off,
charging will not be possible. Charge by using the AC adaptor. (l 34)
≥ It will take 2 or 3 times longer to charge compared to when using the
AC adaptor.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to
page 186.

158 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

159 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Using the unit as a web camera
When the unit is connected to a PC that is connected to the Internet, the
unit can be used as a web camera.
PC
IBM PC/AT compatible PC

Mac

Necessary
software

Windows Live Messenger

iChat

Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)

Mac OS X
10.7.2

CPU

Windows 7/Windows Vista: 1 GHz or higher Intel Core 2
32-bit (k86) or 64-bit (k64) processor Duo or better
(including compatible CPU)
Windows XP: Intel Pentium III 450 MHz or
higher or Intel Celeron 400 MHz or higher

RAM

2 GB or
Windows 7: 1 GB or more (32 bit)/
2 GB or more (64 bit)
more
Windows Vista Home Basic:
512 MB or more
Windows Vista Home Premium/
Business/Ultimate/Enterprise:
1 GB or more
Windows XP: 512 MB or more (1 GB or
more recommended)

Interface

USB port

Other
requirements

Mouse or equivalent pointing device

≥ Operation cannot be guaranteed on every PC having the
recommended environment.
≥ Not compatible with Microsoft Windows 3.1, Windows 95, Windows 98,
Windows 98SE, Windows Me, Windows NT and Windows 2000.
≥ Operation is not guaranteed in the following cases.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
VQT4F46 159

HX-WA20PPPCPU-VQT4F46_mst.book

160 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Connect the unit to a PC and set the unit to web
camera mode. (l 155)

≥ The LCD monitor will turn off.
≥ If you touch anything other than [WEB CAMERA], remove and then
reconnect the USB cable.

(On the PC)

Start Windows Live Messenger or iChat.
≥ Check that the unit has been selected in the Windows Live Messenger
or iChat settings.
≥ When disconnecting the USB cable from your PC, please close
Windows Live Messenger or iChat before disconnecting.
≥ After 12 hours, the unit is automatically turned off.
≥ In web camera mode, the following functions are disabled.
j [DIGITAL ZOOM], [i.ZOOM], [FACE CHASER], [E.I.S.(VIDEO)] and
[E.I.S.(PICTURE)]
≥ In web camera mode, although the unit can record up to 30 frames per
second, this rate may drop due to network conditions and PC
processing speed.
≥ Operation cannot be guaranteed on all devices having a USB terminal.

160 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

161 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

Starting HD Writer VE 2.0
≥ To use the software, log on as an Administrator or as user name for
standard user account (only for Windows 7/Windows Vista).
The software cannot be used with the user name for a guest account.

(On the PC)

Select [Start] # [All Programs] # [Panasonic] #
[HD Writer VE 2.0] # [HD Writer VE].

≥ For details on how to use the software applications, read the PDF
operating instructions of the software.

Reading the operating instructions of the
software applications
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0
or later to read the PDF operating instructions.

Select [Start] # [All Programs] # [Panasonic] #
[HD Writer VE 2.0] # [Operating Instructions].

VQT4F46 161

HX-WA20PPPCPU-VQT4F46_mst.book

162 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

If using Mac
≥ HD Writer VE 2.0 is not available for Mac.
≥ iMovie’11 supported. For details about iMovie’11, please contact
Apple Inc.
≥ HX-WA20
You cannot acquire scenes recorded in Slow Motion Mode (l 81) to Mac.

∫ Operating environment
PC
OS
CPU
RAM
Interface
Other
requirements

Mac
Mac OS X 10.7.2
Intel Core 2 Duo or better
2 GB or more
USB port
Mouse or equivalent pointing device

≥ Even if the system requirements mentioned in this owner’s manual are
fulfilled, some PCs cannot be used.
≥ The USB equipment operates with the driver installed as standard in
the OS.
≥ Supplied CD-ROM is available for Windows only.

∫ Copying still pictures on PC

Connect this unit to a PC via the supplied USB cable.

≥ The USB function selection screen will appear.

Select [CARD READER] using the SET button on the
unit, and press the SET button.

≥ The LCD monitor will turn off.
≥ This unit is automatically recognized as an external drive of Mac.
≥ If you select anything other than [CARD READER], remove and then
reconnect the USB cable.

Double click on the [CAM_SD] or [CAM_MEM]
displayed on the desktop.

≥ Files are stored in [100CDPFP] folder etc. in the [DCIM] folder.

162 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

163 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Using a drag-and-drop operation, move the pictures
you want to acquire or the folder storing those
pictures to any different folder on the PC.

∫ To disconnect USB cable safely
Drag [CAM_SD] or [CAM_MEM] disk icon to the [Trash], and then
disconnect the USB cable.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
With a PC

Uploading files to a web service
When you connect the unit to a PC that is connected to the Internet, you
can easily upload files recorded on the SD card to YouTube or Facebook.
≥ Insert the SD card.
≥ Set to Playback mode. (l 47)

Select the menu.

[MENU]:

2 # [UPLOAD SET] # [SELECT]

Select the file to upload using the SET button and
press the SET button.

≥

will appear on the selected file. To cancel, press the SET button
again.
≥ You can continue selecting up to maximum of 20 files.
≥ Copy files recorded to the built-in memory to the SD card before
configuring the settings.
≥ On configuring the settings, the upload tool built into the unit
(HD Writer Web Uploader) is automatically copied to the SD card.

VQT4F46 163

HX-WA20PPPCPU-VQT4F46_mst.book

164 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Press the recording start/stop button or the
button.

≥ To cancel all selections, press the MENU button, select
[CANCEL ALL], and press the SET button.

Connect the unit to the PC using the USB cable.

HX-WA20

HX-WA2



HX-DC2

A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ Removable disk (Example:
) is displayed in
[Computer].

Select [CARD READER] using the SET button and
press the SET button.

6
7

Open the removable disk that appears in [Computer].
Double-click [HDWWEBUP.EXE] in the [AD_HDWUP]
folder.

≥ The HD Writer Web Uploader will start.

164 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

165 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Select an upload destination.

≥ For subsequent operations, please read the operating instructions
(PDF) of the HD Writer Web Uploader.

≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0
or later to read the PDF operating instructions.
≥ Audio files cannot be handled.
≥ When using the Eye-Fi card, the web upload function is disabled.
≥ Operation cannot be guaranteed on future YouTube and Facebook
services and updates. The service content and screens which can be
used are subject to change without prior notice. (The service is
currently available (February 1st 2012))
≥ Do not upload images protected by copyright unless you hold the
copyright or you have obtained permission from the relevant copyright
holder.

VQT4F46 165

HX-WA20PPPCPU-VQT4F46_mst.book

166 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC

Using the Eye-Fi™ transfer feature
By using the Eye-Fi card, you can save files recorded on a card to a PC
or file-sharing site via a wireless network.
≥ The functions of the Eye-Fi card (including wireless transmission) are
not guaranteed to work on this product. In the case of a malfunction of
the card, please contact the card manufacturer.
≥ To use the Eye-Fi transfer feature, a broadband wireless LAN
environment is required.
≥ To use the Eye-Fi card, permission from the national or regional
government is required. Do not use if you have not obtained
permission. If you are unsure as to whether use is permitted, please
check with the card manufacturer.
≥ Install the software supplied with the Eye-Fi card in advance on
your PC, and configure the Eye-Fi settings. (For settings methods
etc., please read the card operating instructions or consult the
card manufacturer)

Select the menu.
[MENU]:

# [Eye-Fi] # [TRANSFER] # [ON]

≥ When [TRANSFER] is set to [ON], the transferable files will be
transferred automatically.
≥ To cancel the forwarding of a file, turn off the unit or set [TRANSFER]
to [OFF].
≥ The setting at the time of purchase is [OFF]. Every time the Eye-Fi card
is removed from the unit, this setting is set to [OFF].
≥ You can check the transfer of the file on the thumbnail screen (8-file
display).
File has been transferred
File waiting for transfer
File cannot be transferred

166 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

167 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Using Direct Mode
The files can be transferred directly from the Eye-Fi card to a smartphone
or tablet without going through the access point when necessary setting
is performed in a PC in advance.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the Direct Mode settings.

Select the menu.
[MENU]:

# [Eye-Fi] # [START DIRECT MODE]

≥ If any of the following operations is performed, the Direct Mode will be
canceled.
j If you turn the unit off
j Closing the LCD monitor, sending the unit into standby mode.
j Starting motion picture or audio recording
The Direct Mode may be canceled by the Eye-Fi card for reasons other
than the above.
≥ In Direct Mode, the economy mode function (l 45) is disabled.
≥ When [TRANSFER] (l 166) is set to [OFF], [START DIRECT MODE]
cannot be selected.

∫ Selecting files to transfer
If you perform the required settings in advance on your PC, you can
transfer selected files alone. For settings methods etc., please read the
card operating instructions or consult the card manufacturer.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the selection transfer settings.

Select the menu.
[MENU]:

1 # [TRANSFER/PROTECT]

≥ The settings method is the same as for the protect settings. (l 131)
≥ For the files set for selected transfer,
is displayed on the
thumbnail screen (1-file display).
≥ If you have not performed selected transfer settings on your PC,
[PROTECT] is displayed and the selection transfer setting is disabled.

VQT4F46 167

HX-WA20PPPCPU-VQT4F46_mst.book

168 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ When the write protect switch on the Eye-Fi card is on the LOCK side,
[PROTECT] is displayed and selected transfer setting is disabled.
Please unlock the write protect switch.
≥ The protect setting is also applied to the files for which [TRANSFER/
PROTECT] is set. To delete or rotate a file, first cancel [TRANSFER/
PROTECT] and then perform the operation.
≥ The [Eye-Fi] menu only appears when an Eye-Fi card is used.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to
operate in the future due to changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using the
software supplied with the Eye-Fi card before use.
≥ Eye-Fi transfer is terminated when it goes into sleep mode by the
energy-saving function during the Eye-Fi transfer. Connect the AC
adapter and set the [AC:REC/PLAY] in [ECONOMY] to [60 min].
(l 71) (Energy-save function will be disabled during the Direct Mode)
≥ When the endless memory function of the Eye-Fi card is set to on, the
files transferred from the card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the files being transferred.
≥ When the Eye-Fi card is used, the battery will run down faster.
≥ Audio files cannot be handled.
≥ The [Eye-Fi] setting can be checked from the recording standby screen
or the thumbnail screen (1-file display).
In [Eye-Fi], [TRANSFER] is set to [ON]
(Transferring in Direct Mode)
In [Eye-Fi], [TRANSFER] is set to [ON]
In [Eye-Fi], [TRANSFER] is set to [OFF]
≥ When using the Eye-Fi card, please be sure to unlock the write-protect
switch. (l 40)
≥ Files cannot be transferred during motion picture recording or audio recording.
≥ Before deleting the files, please confirm they have been transferred to
your PC and uploaded to the sharing site.
≥ Do not use the Eye-Fi card in locations where the use of wireless
devices is forbidden, such as inside aircraft etc.
≥ Depending on network conditions, the transfer may take some time.
Also, if network conditions deteriorate, the transfer may be suspended.
≥ Files over 2 GB in size cannot be transferred. Such files should first be
split to reduce the file size. (l 124)

168 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

169 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

LCD Display Indications
∫ Recording indications



3000

000:00:15



ISO400
F3.5
1/30

A
(White)

Still picture recording icon

(Red)

Recording still picture
During burst recording (l 83)

HX-WA20

/
HX-WA2

/ HX-DC2
/
/
/

/ 12 M / 8.3M /

Number of recording pixels for still pictures (l 90, 115)
In Playback Mode, the picture size is not displayed for still pictures
recorded with other products that have different picture sizes from the
sizes shown above.
Burst recording (l 83)

HX-WA20

/
HX-WA2

/
/

/ HX-DC2
/
/
Panorama recording (l 85)

VQT4F46 169

HX-WA20PPPCPU-VQT4F46_mst.book

3000

170 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Remaining number of still pictures (l 56)
High temperature warning (l 46)

ßA/ß/

Flash (l 96)
Camera shake warning (l 57)

*1/

Scene Mode (l 90)
*1 HX-WA20 only
*2 HX-WA20 / HX-WA2 only
/

Color mode (l 99)
ISO50/ISO100/ISO200/ISO400/ISO800/ISO1600/ISO3200*3
ISO sensitivity (l 100)
*3 HX-WA20 only
/

Intelligent Auto Mode (l 61)
Exposure (l 101)

HX-WA20

F3.5

Iris value (l 56, 110)

1/30

Shutter Speed (l 56, 110)

HX-WA2

/ HX-DC2

Zoom/Double range zoom (l 77)

/
B
/

(Gray)
(Red)

Eye-Fi settings (l 168)
Audio recording icon
Recording audio
Focus mark (l 98)
Spot metering target (l 98)

HX-WA20

170 VQT4F46

Zoom unavailable icon (l 82)

*2/

HX-WA20PPPCPU-VQT4F46_mst.book

171 ページ

２０１２年２月１４日 火曜日 午後５時１０分

C
/
/

/
/

Recording Mode (l 89)
Slow Motion Mode (l 81)

HX-WA20

/
(White)
(Red)

Motion picture recording icon
Recording motion picture

μ (Red)

Recording motion picture (l 53)
Recording audio (l 60)

000:00:15

Recording time elapsed (l 53, 60)
Approximate remaining recordable time (l 53,
60)
AF Lock (l 105)
AE Lock (l 105)

Ø10/Ø2

Self-timer Recording (l 97)
Card recording possible status
Built-in memory recording possible status

/MF/

Image Stabilizer (l 80)
Focus (l 112)
Remaining battery power (l 37)

∫ Playback indications
1/;/5/6/D/E

Display during playback (l 65, 113)

00:00:30

Playback Time (Motion picture)

000:00:30

Playback Time (Audio)

DEC 15 2012 3:30PM Recording date and time
DEC 15 2012

Recording date

100-0001

Folder/file name
Motion picture file
VQT4F46 171

HX-WA20PPPCPU-VQT4F46_mst.book

172 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Audio file
Files for which selected transfer/protect is set
(l 131, 167)
Face detection (l 102)
/
/

Panorama still picture (l 85)
/

Eye-Fi transfer status (l 166)
Files exceeding 4 GB in size (l 67)
Remaining battery power (l 37)
Files which cannot be played back

∫ Confirmatory indications
––– –– –––– ––:–––– The built-in battery is low. (l 49)
(Time display)
Incompatible SD card is used.

172 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

173 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Messages
Major confirmation/error messages to be indicated on the screen in text.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this indication appears despite motion pictures, still pictures and
audio being recorded on the SD card, the SD card may be in an
unstable state. Re-insert the SD card and turn the unit off and on
again.
CARD FULL.
Built-in Memory full.
There is no space on the SD card or in built-in memory. Please delete
unneeded files or use an SD card with space on it.
Card is protected
The write protection switch on the SD card is in the LOCK position.
Please unlock the write protect switch. (l 40)
Others

Troubleshooting
∫ It is not a malfunction in following cases
Object seems to be
warped.

≥ Object seems to be warped slightly when the
object moves across the image very fast, but
this is because the unit is using MOS for the
image sensor. This is not a malfunction.

VQT4F46 173

HX-WA20PPPCPU-VQT4F46_mst.book

174 ページ

２０１２年２月１４日 火曜日 午後５時１０分

White round spots
like soap bubbles
appear on the
recorded picture.

≥ If you take a
picture with the
flash in a dark
place or indoors,
white round spots
may appear on
the picture caused by the flash reflecting of
particles of dust in the air. This is not a
malfunction. A characteristic of this is that the
number of round spots and their position
differ in every picture.

Why does the
displayed image
contain some red,
blue and green
dots, or why are
black spots visible.

≥ Condition due to the LCD monitor
characteristics. Not a malfunction. Spots only
appear in the LCD monitor and will not be
recorded with the images.

Power
Problem

Check points

This unit cannot be
turned on.

≥ Recharge the battery pack or connect the
AC adaptor. (l 34)
≥ In cold places, the battery using time
becomes shorter.
≥ It is possible to insert the battery incorrectly,
so please pay particular attention when
inserting that it is correctly oriented.

This unit does not
stay on long
enough.
Battery runs down
quickly.
The battery does
not charge.
The battery does
not stop charging.

174 VQT4F46

≥ Check that the plug portion of the AC
adaptor is not loose or misaligned.

HX-WA20PPPCPU-VQT4F46_mst.book

175 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Power
Problem

Check points

This unit is turned
off automatically.

≥ To prevent battery consumption caused by
forgetting to turn the unit off etc., the
economy mode function works to send the
unit into sleep mode if the unit has been on
for approximately 5 minutes (default setting)
without an operation being performed.
When the unit is in sleep mode, you can
turn on the unit by pressing any of the
buttons on the unit.
≥ If the unit turns off when you turn off the
power to the TV using the TV remote
control, the VIERA Link is at work. If you are
not using the VIERA Link, set [VIERA Link]
to [OFF]. (l 138)

This unit cannot be
operated though it
is turned on.

≥ Remove the battery or AC adaptor, wait
about 1 minute and then reconnect the
battery or AC adaptor. Then about 1 minute
later, turn on the unit again. (Conducting the
above operation while the media is being
accessed may damage the data on the
media.)
≥ If normal operation is still not restored,
detach the power connected, and contact
consumer support. (l 207, 208, 209)

This unit does not
operate normally.

A blinking high
temperature
warning icon
is shown, and the
unit does not turn
on.

≥ The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.

VQT4F46 175

HX-WA20PPPCPU-VQT4F46_mst.book

176 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Power
Problem

Check points

“ERROR
OCCURRED.
PLEASE TURN
UNIT OFF, THEN
TURN ON AGAIN.”
is displayed.

≥ Check each of the following items.
j Remove the SD card from the device and
reinsert.
j Remove the battery and then put it in
again.
j Change the SD card and check.
≥ If a message is still displayed after checking
the above, detach the power connected,
contact consumer support. (l 207, 208,
209)

Indication
Problem
The battery
capacity indication
or the elapsed time
indication is not
shown.

Check points
≥ [DISPLAY] is [OFF]. (l 71)

Status indicator
Problem
The status
indicator is
flashing red.

176 VQT4F46

Check points
≥ During battery charging, the status indicator
flashes red with a period of approximately
2 seconds (approximately 1 second on,
1 second off). When charging ends, the
status indicator turns off. This is not a
malfunction.

HX-WA20PPPCPU-VQT4F46_mst.book

177 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Recording
Problem

Check points

The high
temperature
warning icon
is displayed and
recording is not
possible.

≥ The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.

When recording
still pictures, the
angle of view of
the image
displayed on the
LCD monitor
changes.

≥ The field of view of the image displayed on
the LCD monitor differs for motion picture
recording and still picture recording. At time
of purchase, the recording standby screen
shows video view. Press the
button
halfway to change to photo view. To change
the angle of view of the recording standby
screen to photo view, set [PHOTO VIEW] to
(ON). (l 107)

The unit arbitrarily
stops recording.

≥ Use an SD card that can be used for motion
picture recording. (l 39)
≥ The recordable time may have shortened
due to the deterioration of the data writing
speed or repeated recording and deletion.
Using the unit, format the SD card or built-in
memory. (l 72)

Image not in focus

≥ Close and then re-open the LCD monitor.
Alternatively, turn the unit off and then on
again. When [FOCUS] is set to
(MANUAL), do the above, then reconfigure
the manual focus.

There is noise in
the recording
image.

≥ When the [ISO] setting is too high, noise
may appear in the recorded images. Please
lower the ISO sensitivity setting. (l 100)

VQT4F46 177

HX-WA20PPPCPU-VQT4F46_mst.book

178 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Recording
Problem

Check points

Color balance of
images is strange
when recording in
a place such as a
gymnasium.

≥ In a place with multiple light sources, such
as a gymnasium or a hall, set the White
Balance setting to
(INDOOR 2). If you
cannot record clearly with the
(INDOOR 2), set it to
(WHITE SET).
(l 108)

Color or
brightness of the
image changes, or
you may see
horizontal bars in
the image.

≥ Color or brightness of the image may
change, or you may see horizontal bars in
the image when the object is recorded
under fluorescent light, mercury light or
sodium light, etc., but this is not a
malfunction.

The LCD monitor
flickers indoors.

≥ HX-WA20
Record in Intelligent Auto Mode or set the
shutter speed to 1/60 in areas where the
power supply frequency is 60 Hz, or 1/100
in areas of 50 Hz.
≥ HX-WA2 / HX-DC2
Record in Intelligent Auto Mode.

Playback
Problem
Files cannot be
played back.

178 VQT4F46

Check points
≥ Any files where the thumbnails display are
displayed as
cannot be played back.

HX-WA20PPPCPU-VQT4F46_mst.book

179 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Playback
Problem

Check points

Files cannot be
deleted.

≥ Release the protect setting. (When using
the Eye-Fi card, the protect setting is
simultaneously set for files for which
selected transfer is set) (l 131, 167)
≥ Any files where the thumbnails are
displayed as
cannot be deleted. If the
files are unnecessary, format the media to
erase the data. (l 72) Please be aware that
if a media is formatted then all the data
recorded on the media is erased and cannot
be recovered. Back up important data on a
PC, disc, etc.

Editing such as
rotation of the files
is not possible.

≥ Release the protect setting. (When using
the Eye-Fi card, the protect setting is
simultaneously set for files for which
selected transfer is set) (l 131, 167)

During playback,
there is no sound.

≥ Adjust the play volume in this unit. (l 66)

With other products
Problem
Video or audio is
not output even
though it is
connected to TV
correctly.
The images are
squeezed
horizontally.

Check points
≥ Please read the operating instructions of
your TV and select the channel that
matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match
the aspect ratio of the TV. (l 136)
≥ When connecting with the HDMI micro
cable ( HX-WA20 / HX-WA2 ) or the HDMI
mini cable ( HX-DC2 ), change the [HDMI]
setting. (l 137)
≥ Depending on the status of the unit and the
connecting cable, a picture may not appear
on the TV or LCD monitor. Check the status
of the unit and the connection. (l 135)

VQT4F46 179

HX-WA20PPPCPU-VQT4F46_mst.book

180 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With other products
Problem

Check points

If the SD card is
inserted in another
device, it is not
recognized.

≥ Check that the device is compatible with the
capacity or type of SD card (SD Memory
Card/SDHC Memory Card/SDXC Memory
Card) that you inserted. Refer to the
operating instructions of the device for
details.

VIERA Link does
not work.

(Setting on this unit)
≥ HX-WA20 / HX-WA2
Connect with an HDMI micro cable
(optional). (l 138)
HX-DC2

Connect with an HDMI mini cable (optional).
(l 138)
≥ Set [VIERA Link] to [ON]. (l 138)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch
automatically, switch the input using the TV
remote control.
≥ Check the VIERA Link setting on the
connected device.
≥ Please refer to the operating instructions of
the connected device.

With a PC
Problem

Check points

An error message
may appear on the
PC when you
charge the battery
by connecting the
USB cable to a PC.

≥ First disconnect the USB connection cable,
then turn on the unit and reconnect. The unit
will be recognized by the PC. To charge the
battery, first safely disconnect the USB
cable and turn off the unit. Then reconnect
the USB cable.

180 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

181 ページ

２０１２年２月１４日 火曜日 午後５時１０分

With a PC
Problem

Check points

When connected
by the USB cable,
this unit is not
detected by the
PC.

≥ After re-inserting the SD card into the unit,
reconnect the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 150,
162)
≥ Connect the supplied USB cable again after
restarting the PC and turning on this unit
again.

When the USB
cable is
disconnected, an
error message will
appear on the PC.

≥ To disconnect the USB cable safely, doubleclick the
icon in the task tray and follow
the instructions on the screen.

Cannot see the PDF
operating instructions for
HD Writer VE 2.0 or
HD Writer Web Uploader.

≥ You will need Adobe Acrobat Reader 5.0 or
later or Adobe Reader 7.0 or later to read
the PDF operating instructions for HD Writer
VE 2.0 or HD Writer Web Uploader.

Others
Problem
If the SD card is
inserted in this
unit, it is not
recognized.

Check points
≥ If the SD card is formatted on a PC, it may
not be recognized by this unit. Use this unit
to format SD cards. (l 72)

VQT4F46 181

HX-WA20PPPCPU-VQT4F46_mst.book

182 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Cautions for use
About this unit
The unit and the SD card become warm during use. This is not a
malfunction.
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
≥ If you use this unit on top of or near a TV, the pictures and/or sound on
this unit may be disrupted by electromagnetic wave radiation.
≥ Do not use this unit near cell phones because doing so may result in
noise adversely affecting the pictures and/or sound.
≥ Recorded data may be damaged, or pictures may be distorted, by
strong magnetic fields created by speakers or large motors.
≥ Electromagnetic wave radiation generated by microprocessors may
adversely affect this unit, disturbing the pictures and/or sound.
≥ If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect
AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn
this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
≥ If you record near radio transmitters or high-voltage lines, the recorded
pictures and/or sound may be adversely affected.
Make sure to use the supplied cords and cables. If you use optional
accessories, use the cords and the cables supplied with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile chemicals onto the unit.
≥ If the unit is sprayed with such chemicals, its body may be marred and
the surface finish may peel off.
≥ Do not leave rubber or plastic products in contact with the unit for a
long time.

182 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

183 ページ

２０１２年２月１４日 火曜日 午後５時１０分

When you use the unit in a sandy or dusty place such as a beach,
do not let sand or fine dust get into the body and terminals of the
unit.
≥ Sand or dust may damage the unit. (Care should be taken when
inserting and removing a card.)
HX-DC2

Keep the unit away from sea water.
≥ If sea water splashes onto the unit, wipe off the water with a well wrung
cloth. Then wipe the unit again with a dry cloth.
When carrying the unit, do not drop or bump it.
≥ A strong impact can break the unit’s casing, causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull the AC adaptor from the AC
outlet, and then wipe the unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water and squeeze firmly, and then
wipe the unit with the damp cloth. Next, dry the unit with a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter
the camera body or peel the surface finish. Do not use these solvents.
≥ When using a chemical dust cloth, follow the instructions that came
with the cloth.
Do not use the unit for surveillance purposes or other business
uses.
≥ This unit was designed for consumer intermittent use. It was not
intended for continuous use, or for any industrial or commercial
application resulting in prolonged use.
≥ In certain situations, continuous use could cause the unit to overheat
and cause a malfunction. Such use is strongly discouraged.
When you are not going to use the unit for an extended time
≥ When storing the unit in a cupboard, it is recommended that you place
a desiccant (silica gel) in with it.

VQT4F46 183

HX-WA20PPPCPU-VQT4F46_mst.book

184 ページ

２０１２年２月１４日 火曜日 午後５時１０分

When disposing of or giving away this unit, note that:
≥ When the built-in memory undergoes [FORMAT], the file management
information is changed but not all of the data in the built-in memory is
deleted. It may be possible to recover the data using commercially
available data-recovery software.
≥ When disposing of/giving away the unit,
Delete all data in
we recommend that you physically format
Built-in Memory?
the built-in memory of the unit.
To perform a physical format, connect the
unit to the AC adaptor, remove the card,
select [FORMAT] # [DELETE DATA]
from the option menu 2 and follow the onscreen instructions.
≥ Please look after the data in your built-in memory carefully. Panasonic
will not be held responsible in the unlikely case that private data is
divulged.

About the battery
The battery used in this unit is a rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and the effect increases the
more the temperature rises or falls. In cold areas, the full charge
indication may not appear or the low battery indication may appear about
5 minutes after starting use. At high temperatures, the protection function
may be triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
≥ If the battery is left attached, a minute amount of current continues to
flow even if the unit is off. Keeping the unit in this state may result in
over discharge of the battery. This may result in you not being able to
use the battery even after it is charged.
≥ The battery should be stored in the vinyl bag so metal does not come
into contact with the terminals.
≥ The battery should be stored in a cool place free from humidity, with as
constant temperature as possible. (Recommended temperature: 15 oC
to 25 oC (59 °F to 77 °F), Recommended humidity: 40%RH to 60%RH)
≥ Extremely high temperatures or low temperatures will shorten the life
of the battery.

184 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

185 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Do not contaminate the terminal portion of the battery attachment
portion or the battery terminals.
≥ If the battery is kept in high-temperature, high-humidity, or oily-smoky
places, the terminals may rust and cause malfunctions.
≥ To store the battery for a long period of time, we recommend you
charge it once every year and store it again after you have completely
used up the charged capacity.
≥ Dust and other matter attached to the battery terminals should be
removed.
≥ Do not remove the external labels and this may result in a malfunction
of the unit.
Prepare spare batteries when going out for recording.
≥ Prepare batteries enough to last for 3 to 4 times the period you are
planning to record for. Cold places such as a ski resort can shorten
recording time.
If you drop the battery accidentally, check to see if the terminals are
damaged.
≥ Inserting a battery with damaged terminals can damage the unit.
Do not throw old battery into fire.
≥ Heating a battery or throwing it into a fire may result in an explosion.
If the operating time is very short even after the battery has been
recharged, the battery has worn out. Please purchase a new battery.

About the AC adaptor
≥ If the temperature of the battery is extremely high or extremely low,
charging may take time or the battery may not be charged.
≥ If you use the AC adaptor near a radio, radio reception may be
disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from the
radio.
≥ When using the AC adaptor, it may generate whirring sounds.
However, this is normal.
≥ After use, be sure to disconnect the AC adaptor. (If you leave this unit
connected, the AC adaptor will consume approximately 0.2 W of
current.)
≥ Always keep the electrodes of the AC adaptor clean.

VQT4F46 185

HX-WA20PPPCPU-VQT4F46_mst.book

186 ページ

２０１２年２月１４日 火曜日 午後５時１０分

About status indicator during charging
When the status indicator is flashing at a particularly fast or slow
rate, the following should be considered.
Flashing with approx. 4 second period (off for approx. 2 seconds,
on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery
is too high or low. It can be charged, but it may take a few hours to
complete the charging normally.
≥ It will flash in 2 second intervals when normal charging resumes. Even
in such cases, it may start flashing in 4 second intervals until charging
is completed depending on the conditions of use.
Flashing with approx. 0.5 second period (off for approx.
0.25 second, on for approx. 0.25 second):
≥ The battery is not charged. Remove the battery from the unit, and try
charging again.
≥ Check that the terminals of the unit or battery are not dirty or covered
with a foreign object, and connect the battery correctly once again. If a
foreign object or dirt is present, turn off the unit before removing.
≥ The battery or environment is at an extremely high or low temperature.
Wait until the temperature has returned to an appropriate level and try
charging again. If you are still unable to charge, there may be a fault in
the unit, battery or AC adaptor.
Off:
≥ Charging has finished.
≥ If the status indicator stays off despite the charging being unfinished,
there may be a fault in the unit, battery or AC adaptor. Refer to page
184 for details on the battery.

186 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

187 ページ

２０１２年２月１４日 火曜日 午後５時１０分

About the SD card
When disposing of or giving away the SD card, note that:
≥ Formatting and deletion of this unit or computer only changes the file
management information and does not completely delete the data in
the SD card.
≥ It is recommended that the SD card is
physically destroyed or the SD card is
Delete all data on the card?
physically formatted using this unit when
disposing of or giving away the SD card.
To perform a physical format, connect the
unit to the AC adaptor, insert the SD card,
select [FORMAT] # [DELETE DATA]
from the option menu 2 and follow the on-screen instructions.
≥ The customer is responsible for the management of the data in the SD
card.

VQT4F46 187

HX-WA20PPPCPU-VQT4F46_mst.book

188 ページ

２０１２年２月１４日 火曜日 午後５時１０分

LCD monitor
≥ When the LCD monitor gets dirty, wipe it with a soft cloth, such as
eyeglass cleaner.
≥ In a place with drastic temperature changes, condensation may form
on the LCD monitor. Wipe it with a soft cloth, such as eyeglass cleaner.
≥ When the unit has become very cold, for example due to storage in a
cold area, its LCD monitor will be slightly darker than usual
immediately after the unit is turned on. The normal brightness will be
restored when the unit’s internal temperature rises.
Extremely high precision technology is employed to produce the LCD
Monitor screen featuring a total of approximately 230,000 dots. The
result is more than 99.99% effective dots with a mere 0.01% of the
dots inactive or always lit. However, this is not a malfunction and does
not affect the recorded picture.

188 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

189 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

About copyright
∫ Carefully observe copyright laws
Whatever you have recorded and created can be used for your
personal entertainment only. Under copyright laws, other materials
cannot be used without obtaining permission from the holders of
the copyrights.

∫ Licenses
≥ SDXC Logo is a trademark of SD-3C, LLC.
≥ HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
≥ VIERA Link™ is a trademark of Panasonic Corporation.
≥ EZ Sync™ is a trademark of Panasonic Corporation.
≥ HDAVI Control™ is a trademark of Panasonic Corporation.
≥ Microsoft®, Windows® and Windows Vista® are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
≥ Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
≥ IBM and PC/AT are registered trademarks of International Business
Machines Corporation of the U.S.
≥ Intel®, Pentium®, Celeron® and Intel® Core™ are trademarks of Intel
Corporation in the U.S. and/or other countries.
≥ AMD Athlon™ is a trademark of Advanced Micro Devices, Inc.
≥ iMovie, iChat, Mac and Mac OS are trademarks of Apple Inc.
registered in the U.S. and other countries.
≥ YouTube is a trademark of Google Inc.
≥ Facebook is a trademark of Facebook Inc.
≥ Other names of systems and products mentioned in these instructions
are usually the registered trademarks or trademarks of the
manufacturers who developed the system or product concerned.

VQT4F46 189

HX-WA20PPPCPU-VQT4F46_mst.book

190 ページ

２０１２年２月１４日 火曜日 午後５時１０分

This product is licensed under the AVC patent portfolio license for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in a personal and noncommercial activity and/or was obtained from a video provider licensed
to provide AVC Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.

190 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

191 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Recording modes/approximate
recordable time
≥ SD cards are only mentioned with their main memory size. The stated
times are the approximate recordable times for continuous recording.


Recording
mode
Picture size
4 GB
SD
card

1920k1080 1920k1080 1280k720
20 min

30 min

1280k720 640k480
2 h 20 min

50 min

16 GB 1 h 50 min 2 h 10 min 2 h 10 min 3 h 30 min 9 h 50 min
64 GB

Built-in Approx.
memory 64 MB
A
B
*1
*2



7h
15 s

8 h 20 min 7 h 50 min 13 h 20 min
20 s

20 s

40 s

32 h
2 min

Favors image quality
Favors recording time
High-definition image quality
Conventional standard image quality

VQT4F46 191

HX-WA20PPPCPU-VQT4F46_mst.book

Recording mode
Picture size

192 ページ

２０１２年２月１４日 火曜日 午後５時１０分

960k540

VOICE RECORD

4 GB

20 min

31 h

SD card

16 GB

1 h 20 min

128 h

64 GB

5 h 20 min

512 h

Built-in
memory

Approx.
64 MB

10 s

30 min

*3 Please use when playing back/editing on a Mac.
HX-WA20

Recording mode
Picture size

SD card

Built-in
memory

640k360

320k180

4 GB

20 min

16 GB

1 h 40 min

1 h 50 min

64 GB

5 h 10 min

4 h 20 min

Approx.
64 MB

15 s

≥ If recording for long periods, prepare batteries for 3 or 4 times the
period you wish to record for. (l 36)
≥ The default setting is
mode.
≥ Recording a quickly moving subject or recording a number of short
scenes may shorten the recordable time.
≥ When the [REC MODE] is set to
(VOICE RECORD), the file is
saved after approximately 5 hours of recording, and the audio
recording ends. With other recording mode setting, the unit saves the
file and saves the continuation in a new file when the file size exceeds
4 GB during recording. (A new file is created automatically every 4 GB.
The recording state is continued until the unit enters the paused state)
≥ HX-WA20
When recording in Slow Motion Mode (
/
), recording ends
after 15 seconds of recording.
≥ Use time in the row of 4 GB in above table as a guideline for the time
that can be copied onto one DVD disc (4.7 GB).

192 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

193 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Approximate number of
recordable pictures
≥ SD cards are only mentioned with their main memory size. The stated
number is the approximate number of recordable pictures.
HX-WA20

Picture size

4608k3456

3616k2712

4:3

4 GB

450

750

1400

16 GB

1900

3100

6000

64 GB

7500

12000

23000

Approx.
64 MB

Aspect ratio
SD card
Built-in
memory

Picture size
Aspect ratio
4 GB
SD card
Built-in
memory

2048k1536

2560k1920

640k480

4:3

2300

16500

16 GB

9000

67000

64 GB

36000

237000

Approx.
64 MB

250

VQT4F46 193

HX-WA20PPPCPU-VQT4F46_mst.book

Picture size

12 M

4 GB

16:9

600

850

1900

3400

2500

3600

7500

13500

64 GB

10000

14000

31000

52000

Picture size

(360e PANORAMA)

(180e PANORAMA)

10688k720 1280k10688 5344k720

Aspect ratio

1280k5344
s

4 GB

500

1000

16 GB

2200

4400

64 GB

8500

17500

Built-in Approx.
memory 64 MB
HX-WA2

8.3M

16 GB

Built-in Approx.
memory 64 MB

SD
card

２０１２年２月１４日 火曜日 午後５時１０分

4608k2592 3840k2160 2560k1440 1920k1080

Aspect ratio
SD
card

194 ページ

/ HX-DC2

Picture size

4352k3264

3744k2808

4:3

4 GB

500

700

1400

SD card

16 GB

2100

2900

6000

64 GB

8500

11500

23000

Built-in
memory

Approx.
64 MB

Aspect ratio

194 VQT4F46

2560k1920

HX-WA20PPPCPU-VQT4F46_mst.book

195 ページ

Picture size

2048k1536

Aspect ratio
4 GB
SD card
Built-in
memory
Picture size
Aspect ratio
4 GB
SD
card

640k480

4:3

2300

16500

16 GB

9000

67000

64 GB

36000

237000

Approx.
64 MB

250

4352k2448 3744k2106 2560k1440 1920k1080
16:9

16:9

650

900

1900

3400

16 GB

2800

3800

7500

13500

64 GB

11000

15000

31000

52000

Built-in Approx.
memory 64 MB

Picture size
Aspect ratio
SD
card

２０１２年２月１４日 火曜日 午後５時１０分

(360e PANORAMA)

(180e PANORAMA)

14400k720 1280k14400 7200k720
s

1280k7200
s

4 GB

400

800

16 GB

1600

3300

64 GB

6500

13000

Built-in Approx.
memory 64 MB

≥ The memory capacity indicated on the label of an SD card is the total of
the capacity for copyright protection and management and the capacity
which can be used on the unit, a PC etc.

VQT4F46 195

HX-WA20PPPCPU-VQT4F46_mst.book

196 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Specifications
Dual Camera
Information for your safety
Power source:

DC 5.0 V (When using AC adaptor)
DC 3.7 V (When using battery)

Power consumption:

Recording;
HX-WA20

4.2 W
HX-WA2

4.1 W
HX-DC2

4.0 W

Charging;
HX-WA20

4.5 W
HX-WA2

4.5 W
HX-DC2

3.4 W

Signal system:
1080/60i, 1080/30p, 720/60p, 720/30p, 540/30p, 480/30p
HX-WA20

360/240p, 180/480p
Recording format:
MPEG-4 AVC file format standard (.MP4)
Motion picture compression:
MPEG-4 AVC/H.264, iFrame
Audio compression:
AAC (2 ch)

196 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

197 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Recording mode and transfer rate:
; Approx. 17 Mbps (VBR)
; Approx. 15 Mbps (VBR)
; Approx. 15 Mbps (VBR)
; Approx. 9 Mbps (VBR)
; Approx. 3 Mbps (VBR)
; Approx. 24 Mbps (VBR)
HX-WA20

; Approx. 18 Mbps (VBR)
; Approx. 14 Mbps (VBR)
For picture size and recordable time of a motion picture, refer to page 191.
Still picture recording format:
JPEG (Design rule for Camera File system, based on Exif 2.2 standard)
Refer to page 193 for the picture size and number of recordable pictures.
Recording media:
SD Memory Card (FAT12 and FAT16 system compliant)
SDHC Memory Card (FAT32 system compliant)
SDXC Memory Card (exFAT system compliant)
Refer to page 39 for details on SD cards usable in this unit.
Built-in memory; Approx. 64 MB
Image sensor:
HX-WA20

1/2.33z 1MOS image sensor
Total; Approx. 16400 K
Effective pixels;
Motion picture; 9810 K (4:3), 8290 K (16:9)
Still picture; 9890 K (4:3), 8370 K (16:9)
HX-WA2 / HX-DC2
1/2.33z 1MOS image sensor
Total; Approx. 14400 K
Effective pixels;
Motion picture; 14300 K (4:3), 11900 K (16:9)
Still picture; 14300 K (4:3), 11900 K (16:9)

VQT4F46 197

HX-WA20PPPCPU-VQT4F46_mst.book

198 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Lens:
HX-WA20

Auto iris
F2.8 to F3.9
Focal length;
4.0 mm to 20.0 mm
35 mm equivalent;
Motion picture (
/
/
/
/
/
);
28.0 mm to 280.0 mm
Motion picture (
);
28.1 mm to 140.5 mm
Motion picture (
);
28.3 mm to 141.5 mm
Still picture;
28.0 mm to 140.0 mm
Minimum focus distance;
Normal; Approx. 10 cm (3.9q) (Wide)/Approx. 1.1 m (3.6 feet) (Tele)
Macro; Approx. 1 cm (0.39q) (Wide)/ Approx. 80 cm (2.6 feet) (Tele)
HX-WA2 / HX-DC2
Auto iris
F3.5 to F3.7
Focal length;
6.8 mm to 34.0 mm
35 mm equivalent;
Motion picture;
38.9 mm to 233.4 mm (Double range zoom W mode, 4:3)
40.0 mm to 240.0 mm (Double range zoom W mode, 16:9)
80.9 mm to 485.4 mm (Double range zoom T mode, 4:3)
82.4 mm to 494.4 mm (Double range zoom T mode, 16:9)
Still picture;
38.6 mm to 193.0 mm (4:3)
39.9 mm to 199.5 mm (16:9)
Minimum focus distance;
Normal; Approx. 10 cm (3.9q) (Wide)/Approx. 1 m (3.3 feet) (Tele)
Macro; Approx. 1 cm (0.39q) (Wide)/ Approx. 80 cm (2.6 feet) (Tele)

198 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

199 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Zoom:
HX-WA20

Motion picture; 5k optical zoom, 15k i.Zoom, 120k digital zoom
Still picture; 5k optical zoom, 10k Extra Optical Zoom (when [PICTURE
SIZE] is set to
or
), 120k digital zoom (when [PICTURE SIZE]
is set to
or
)
HX-WA2 / HX-DC2
Motion picture; 5k optical zoom, 12k double range zoom, 15k i.Zoom,
120k digital zoom
Still picture; 5k optical zoom, 50k digital zoom
Image stabilizer function:
Electronic
Monitor:
HX-WA20 / HX-WA2
2.6z wide LCD monitor (Approx. 230 K dots)
HX-DC2

3.0z wide LCD monitor (Approx. 230 K dots)
Microphone:
Stereo
Speaker:
1 round speaker, dynamic type
White balance adjustment:
Auto tracking white balance system
Standard illumination:
1,400 lx
Minimum required illumination:
HX-WA20

Approx. 2 lx (1/15 with Low Light mode in the Scene mode)
Approx. 6 lx (Scene mode off 1/30)
HX-WA2

Approx. 3 lx (1/15 with Low Light mode in the Scene mode)
Approx. 9 lx (Scene mode off 1/30)
HX-DC2

Approx. 4 lx (1/15 with Low Light mode in the Scene mode)
Approx. 12 lx (Scene mode off 1/30)
USB/AV connector video output level:
1.0 Vp-p, 75 h

VQT4F46 199

HX-WA20PPPCPU-VQT4F46_mst.book

200 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HDMI micro connector video output level ( HX-WA20 / HX-WA2 )/
HDMI mini connector video output level ( HX-DC2 ):
HDMI™ 1080i/720p/480p
USB/AV connector audio output level (Line):
155 mV, 220 h, 2 ch
HDMI micro connector audio output level ( HX-WA20 / HX-WA2 )/
HDMI mini connector audio output level ( HX-DC2 ):
Linear PCM
USB:
Reader function
SD card; Read only (No copyright protection support)
Built-in memory; Read only
Hi-Speed USB (USB 2.0), USB terminal Type micro B (AV output share)
Battery charging function (Charges from USB terminal when the unit is
off, 500 mA)
Web camera;
Compression format; Motion JPEG
Image size; 640k480/30p (VGA)
Flash:
HX-WA20

Available range; Approx. 80 cm to 2.0 m (2.6 feet to 6.6 feet)
HX-WA2 / HX-DC2
Available range; Approx. 80 cm to 2.1 m (2.6 feet to 6.9 feet)
Dimensions:
HX-WA20 / HX-WA2
93.9 mm (W)k125.6 mm (H)k44.1 mm (D)
[3.70 q (W)k4.95 q (H)k1.74 q (D)] (including projecting parts)
HX-DC2

86.2 mm (W)k120.8 mm (H)k38.1 mm (D)
[3.40 q (W)k4.76 q (H)k1.50 q (D)] (including projecting parts)

200 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

201 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Mass (Weight):
HX-WA20

Approx. 235 g (Approx. 0.519 lbs.)
[without battery (supplied) and an SD card (optional)]
HX-WA2

Approx. 238 g (Approx. 0.525 lbs.)
[without battery (supplied) and an SD card (optional)]
HX-DC2

Approx. 162 g (Approx. 0.358 lbs.)
[without battery (supplied) and an SD card (optional)]
Mass (Weight) in operation:
HX-WA20

Approx. 256 g (Approx. 0.565 lbs.)
[with battery (supplied) and an SD card (optional)]
HX-WA2

Approx. 259 g (Approx. 0.571 lbs.)
[with battery (supplied) and an SD card (optional)]
HX-DC2

Approx. 180 g (Approx. 0.397 lbs.)
[with battery (supplied) and an SD card (optional)]
Operating temperature:
0 oC to 35 oC (32 °F to 95 °F)
Operating humidity:
10%RH to 80%RH
Waterproof performance:
HX-WA20 / HX-WA2
Equivalent to IEC 60529 “IPX8”
Depths less than 3.0 m (10 feet) for 60 minutes or less
Dustproof performance:
HX-WA20

Equivalent to IEC 60529 “IP5X”
Battery operation time:
See page 36

VQT4F46 201

HX-WA20PPPCPU-VQT4F46_mst.book

202 ページ

２０１２年２月１４日 火曜日 午後５時１０分

AC adaptor
Information for your safety
Power source:

AC 100 V to 240 V, 50/60 Hz

Power
consumption:

DC output:

DC 5.0 V, 1.0 A

Dimensions:
48.9 mm (W)k32.8 mm (H)k75.2 mm (D)
[1.93 q (W)k1.29 q (H)k2.96 q (D)]
Mass (Weight):
Approx. 54 g (Approx. 0.119 lbs.)

202 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

203 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Optional accessories
Accessory No.
HX-WA20

HX-WA2

Figure

Description
Rechargeable Lithium Ion
Battery Pack

VW-VBX090*
HX-DC2

VW-VBX070*
HX-WA20

Rechargeable Lithium Ion
Battery Pack
HDMI micro cable

HX-WA2

RP-CHEU15
HX-DC2

HDMI mini cable

RP-CDHM15
RP-CDHM30
* Please refer to page 36, concerning the battery charging time and
available recording time.

VQT4F46 203

HX-WA20PPPCPU-VQT4F46_mst.book

Accessory No.
RP-SDL16GU1K
RP-SDL08GU1K
RP-SDL04GU1K
RP-SDL02GU1K
RP-SDU64GE1K
RP-SDU32GU1K
RP-SDU16GU1K
RP-SDU08GU1K
RP-SDU04GU1K

204 ページ

Figure

２０１２年２月１４日 火曜日 午後５時１０分

Description
Class 4 16 GB SDHC
Memory Card
Class 4 8 GB SDHC
Memory Card
Class 4 4 GB SDHC
Memory Card
Class 4 2 GB SD Memory
Card
Class 10 64 GB SDXC
Memory Card
Class 10 32 GB SDHC
Memory Card
Class 10 16 GB SDHC
Memory Card
Class 10 8 GB SDHC
Memory Card
Class 10 4 GB SDHC
Memory Card

NOTE:
Accessories and/or model numbers may vary by country. Please
consult your local dealer.
Product numbers correct as of Feb. 2012. These may be subject
to change.

204 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

205 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Accessory Order Form
(For USA and Puerto Rico Customers)
Please photocopy this form when placing an order.
1. Model #
2. Items Ordered
Accessory #

Description

Price Each

Quantity

Total Price

Shipping & Handling

$6.95

Subtotal
Your State & Local Sales Tax
Total
3. Method of payment (check one)
American Express
VISA

Credit Card #

MasterCard

Expiration Date

Discover

Customer Signature

(Please do not send cash)
4. Shipping information (UPS delivery requires complete street address)
Ship To:
Mr.
Mrs.
Ms.
First

Phone#:

Last

Day

(

)

Night

(

)

Street Address
City

State

Zip

TO OBTAIN ANY OF OUR ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM M-F, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER
20421 84th Ave. S., Kent, WA 98032

In CANADA, please contact your local Panasonic dealer for more
information on Accessories.
VQT4F46 205

HX-WA20PPPCPU-VQT4F46_mst.book

206 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Camcorder Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will,
for the length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.

Product or Part Name
Camcorder
SD Memory Cards, Rechargeable Batteries
(defective exchange)

Parts

Labor

1 year

90 days

Not Applicable

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies
to products purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as is”.

Carry-In or Mail-In Service
To find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA
(7262).
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s
Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping
Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as
Panasonic is committed to providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number where you can be reached.
A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.

Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of
consumer controls, improper maintenance, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or
other business or rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of God.

206 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

207 ページ

２０１２年２月１４日 火曜日 午後５時１０分

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or
damage to media or images, data or other memory or recorded content. The items listed are not
exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the warranty period, you
may contact your dealer or Service Center. If the problem is not handled to your satisfaction,
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products
by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277

As of January 2012

VQT4F46 207

HX-WA20PPPCPU-VQT4F46_mst.book

208 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Warranty (For Canadian Customers)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under
normal use and for a period as stated below from the date of original purchase agrees to, at its option
either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will
be made by Panasonic Canada Inc.

Camcorder Products - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold
“as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE
RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND
PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other
business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is
attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty. Rechargeable batteries are
warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT
OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty
excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other
memory or recorded content. This list of items is not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable. This warranty gives you specific legal rights and you may have other rights which
vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:

Our Customer Care Centre:

Telephone: 1-800-995-8649
Fax #: (905) 238-2360
Email link: camcorderconcierge@ca.panasonic.com

For defective product exchange within the warranty period, please contact the original dealer or our
Customer Care Centre.

208 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

209 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Others

Useful Information
(Only For Latin American Countries)
Customer Service
Customer Service Directory
Obtain product information and operative assistant; localize the closer distributor or
Service Center; buy spare parts and accessories by our web site to Latin American:

http://www.lar.panasonic.com
Also you may contact us directly by our Contact Center:
Panama
Colombia
Ecuador
Costa Rica
El Salvador
Guatemala
Chile
Venezuela
Uruguay
Peru
Argentina
Paraguay

800-PANA (800-7262)
01-8000-94PANA (01-8000-947262)
1800-PANASONIC (1800-726276)
800-PANA737 (800-7262737)
800-PANA (800-7262)
1-801-811-PANA (1-801-811-7262)
800-390-602
From a cell phone: 797-5000
800-PANA-800 (800-7262-800)
0-800-PANA (0-800-7262)
0800-00726
0800-333-PANA (0800-333-7262)
0810-321-PANA (0810-321-7262)
0800-11-PANA (0800-11-7262)

Mexico Service
To obtain information in the Republic of Mexico contact us at:

email: atencion.clientes@mx.panasonic.com
Or you may contact us in the next following phones numbers:
01800-VIP-PANA (01800-847-7262) - Interior
(55) 5000-1200 - Mexico D.F. and Metropolitan Area

VQT4F46 209

HX-WA20PPPCPU-VQT4F46_mst.book

210 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Index
∫A

∫F

AC adaptor . . . . . . . . . . 34, 185
Alert sound . . . . . . . . . . . . . . 70
Approximate number of
recordable pictures . . . . . . 193
Audio compatibility . . . . . . . . 67
Auto focus . . . . . . . . . . . . . . 63
Auto review . . . . . . . . . . . . 108
Automatic white balance . . . 63

File No. continued . . . . . . . . 74
Flash . . . . . . . . . . . . . . . . . . 96
Focus . . . . . . . . . . . . . 63, 112
Focus mode . . . . . . . . . . . . 98
Formatting . . . . . . . . . . . . . . 72
Frame-by-frame
playback . . . . . . . . . . . . . . 114

∫B

HD Writer VE 2.0 . . . 145, 161
HDMI micro
connector . . . .25, 132, 137, 138
HDMI mini
connector . . . .27, 133, 137, 138

Battery . . . . . . . . . . . . . 30, 184
Battery capacity indication . . . . 37
Brightness . . . . . . . . . . . . . . 71
Built-in memory . . . . . . . . . . . 7
Burst recording . . . . . . . . . . 83

∫C
Card . . . . . . . . . . . . . . . 39, 187
Card reader . . . . . . . . . . . . 156
Charging time (battery) . . . . 36
Cleaning . . . . . . . . . . . . . . . 183
Color mode . . . . . . . . . . . . . 99
Copy
Built-in Memory to
SD card . . . . . . . . . . . . . 142
Dubbing . . . . . . . . . . . . . 143

Creating still picture from
motion picture . . . . . . . . . . 115

∫D
Date and time . . . . . . . . . . . 48
Delete . . . . . . . . . . . . . . . . 128
Digital zoom . . . . . . . . . . . . . 78
Display . . . . . . . . . . . . . . . . . 71
Displaying file information . . . 120
Double range zoom . . . . . . . 77

∫E
Economy . . . . . . . . . . . . 45, 71
Eye-Fi . . . . . . . . . . . . . . . . 166

210 VQT4F46

∫H

∫I
i.Zoom . . . . . . . . . . . . . . . . . 78
iFrame . . . . . . . . . . . . . . . . . 89
Image stabilizer function . . . 80
Initial setting . . . . . . . . . . . . 72
Intelligent Auto Mode . . . . . 61
Iris . . . . . . . . . . . . . . . . . . . 110

∫L
Language . . . . . . . . . . . . . . 71
LCD Display Indications . . 169
LCD monitor . . . . . 24, 27, 188
Limited Warranty
(Canada) . . . . . . . . . . . . . . 208
Limited Warranty
(USA and Puerto Rico) . . . 206

∫M
Manual adjustment . . . . . . 110
Manual focus . . . . . . . . . . . 112
Manual recording . . . . . . . 108
Menu . . . . . . . . . . . . . . . . . . 68
Metering mode . . . . . . . . . . 98
Motion picture compatibility . . . . 67

HX-WA20PPPCPU-VQT4F46_mst.book

211 ページ

∫P
Panorama recording . . . . . . 85
Panorama still picture . . . . 116
Photo view . . . . . . . . . . . . . 107
Picture size . . . . . . . . . . . . . 90
Play volume . . . . . . . . . . . . 122
Playback folder . . . . . . . . . . 74
Playback Operations . . . . . 113
Playback zoom
(still picture) . . . . . . . . . . . . 117
Power button . . . . . . . . . . . . 44
Protect . . . . . . . . . . . . . . . . 131

２０１２年２月１４日 火曜日 午後５時１０分

Sleep mode . . . . . . . . . . . . . 45
Slide show . . . . . . . . . . . . . 118
Slow motion mode . . . . . . . 81
Slow-motion playback . . . . 114
Splitting a scene . . . . . . . . 124
Standby mode . . . . . . . . . . . 44
Still picture compatibility . . . 67

∫T
Transfer . . . . . . . . . . . . . . . 167
Tripod receptacle . . . . . 26, 29
TV aspect . . . . . . . . . . . . . 136
TV format . . . . . . . . . . . . . 137

∫R

∫U

Recordable time . . . . . . 36, 191
Recording folder . . . . . . . . . 73
Recording mode . . . . . . . . . 89
Recording time elapsed
(audio) . . . . . . . . . . . . . . . . . 60
Recording time elapsed
(motion picture) . . . . . . . . . . 53
Red-eye correct . . . . . . . . . 124
Remaining number of
still pictures . . . . . . . . . . . . . 56
Remaining time left for
recording . . . . . . . . . . . . 53, 60
Resize . . . . . . . . . . . . . . . . 123
Rotate . . . . . . . . . . . . . . . . 122

Underwater recording . . . . . 88
USB/AV
connector . . . . 25, 27, 132, 133, 143, 155
Useful Information (Latin
American Countries) . . . . . 209

∫S

∫Z

Scene mode . . . . . . . . . . . . . 90
Scene splicing . . . . . . . . . . 126
Scroll playback . . . . . . . . . . 114
SD Memory Card . . . . . . . . . 39
SD Speed Class Rating . . . . 39
SDHC Memory Card . . . . . . 39
SDXC Memory Card . . . . . . 39
Self timer recording . . . . . . . 97
Self-recording . . . . . . . . . . . 51
Shortcut functions . . . . . . . 103
Shutter speed . . . . . . . . . . 110
Simultaneous recording . . . . 58

Zoom . . . . . . . . . . . . . . . . . . 76
Zoom mode . . . . . . . . . . . . . 78

∫V
VIERA Link . . . . . . . . . . . . 138
Volume adjustment . . . . . . . 66

∫W
Web camera . . . . . . . . . . .
Web upload . . . . . . . . . . . .
White balance . . . . . . . . . .
Wind cut . . . . . . . . . . . . . .

159
163
108
108

VQT4F46 211

HX-WA20PPPCPU-VQT4F46_mst.book

212 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Spanish Quick Use Guide/Guía
española para el uso rápido
∫ Insertar/extraer la batería
HX-WA20/HX-WA2

Abra la puerta trasera.

SD CARD/




LOCK

BATTERY

1 Desbloquee la palanca LOCK.
2 Deslice la palanca para abrir/cerrar.
3 Abra la puerta trasera.

(Para insertar el paquete de baterías)

Confirme la orientación de las marcas del terminal e
inserte la batería.



A marcas del terminal

212 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

213 ページ

２０１２年２月１４日 火曜日 午後５時１０分

≥ Confirme que la palanca B esté bloqueada en la batería.
≥ Se puede insertar erróneamente la batería colocándola al revés, por lo
tanto asegúrese de verificar atentamente la orientación.

(Para retirar el paquete de baterías)



Empuje la palanca B hacia la
dirección de la flecha y tire la
batería de forma recta hacia afuera.

Cierre la puerta trasera.

SD CARD/



LOCK

BATTERY



1 Cierre la puerta trasera.
2 Deslice la palanca para abrir/cerrar.
3 Bloquee la palanca LOCK.



Palanca de
bloqueo

LOCK

SD CARD/
BATTERY

Palanca para
abrir/cerrar

Estado
bloqueado
SD CARD/
BATTERY

LOCK

Estado
desbloqueado

≥ Bloquee de forma segura en los puntos donde la parte roja C de la
palanca para abrir/cerrar y la palanca LOCK ya no estén visibles.

VQT4F46 213

HX-WA20PPPCPU-VQT4F46_mst.book

214 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-DC2

Abra la tapa de la batería/tarjeta.



1 Deslice mientras empuja la
tapa de la batería/tarjeta.
2 Abra la tapa de la batería/
tarjeta.



Inserte la batería, tenga cuidado y vea que coincidan
las marcas del terminal.



A marcas del terminal
≥ Se puede insertar erróneamente la batería colocándola al revés, por lo
tanto asegúrese de verificar atentamente la orientación.

Cierre la tapa de la batería/tarjeta.

≥ Cierre de forma segura, escuche un sonido de clic.

214 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

215 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Retirar la batería
Mantenga presionado el botón de alimentación para apagar la unidad,
luego tire hacia arriba y retire la batería.
≥ Siempre revise que el monitor LCD y la lámpara del indicador de
estado estén apagados.

∫ Carga de la batería
HX-WA20

/ HX-WA2










HX-DC2












A Indicador de estado
B Adaptador de CA
C A la toma de CA
≥ Inserte las clavijas hasta el fondo.
VQT4F46 215

HX-WA20PPPCPU-VQT4F46_mst.book

216 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Conecte el cable USB al adaptador de CA.

≥ Revise que la parte del enchufe del adaptador de CA no esté floja o
mal alineada.

Enchufe el adaptador de CA en un tomacorriente de
CA.

Conecte el cable USB a la unidad.

≥ El indicador de estado parpadea en rojo durante un período de
aproximadamente 2 segundos (aproximadamente 1 segundo encendido,
aproximadamente 1 segundo apagado), y comienza la carga.
Se apagará cuando se completa la carga.

∫ Insertar/extraer una tarjeta SD
HX-WA20/HX-WA2
Abra la puerta trasera.






SD CARD/
BATTERY

LOCK

1 Desbloquee la palanca LOCK.
2 Deslice la palanca para abrir/cerrar.
3 Abra la puerta trasera.

216 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

217 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Inserte (retire) la tarjeta SD en (de) la ranura de la
tarjeta.



≥ Oriente el lado de la etiqueta A en la dirección mostrada en la
ilustración e introdúzcalo hasta el fondo.
≥ Presione el centro de la tarjeta SD y luego retírela completamente.

Cierre la puerta trasera.

SD CARD/



LOCK

BATTERY



1 Cierre la puerta trasera.
2 Deslice la palanca para abrir/cerrar.
3 Bloquee la palanca LOCK.
≥ Bloquee de forma segura en el punto donde la parte roja de la
palanca LOCK ya no sea visible.

VQT4F46 217

HX-WA20PPPCPU-VQT4F46_mst.book

218 ページ

２０１２年２月１４日 火曜日 午後５時１０分

HX-DC2

Abra la tapa de la batería/tarjeta.





Inserte (retire) la tarjeta SD en (de) la ranura de la
tarjeta A.



≥ Oriente el lado de la etiqueta B en la dirección mostrada en la
ilustración e introdúzcalo hasta el fondo.
≥ Presione el centro de la tarjeta SD y luego retírela completamente.

Cierre la tapa de la batería/tarjeta.

≥ Cierre de forma segura hasta que haga clic.

218 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

219 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Encender/apagar el dispositivo
Encender y apagar el dispositivo con el botón de alimentación
HX-WA20

/ HX-WA2

HX-DC2

Pulse el botón de alimentación para encender la unidad.
Para apagar la unidad
Mantenga presionado el botón de encendido hasta que se apague el
monitor LCD.

VQT4F46 219

HX-WA20PPPCPU-VQT4F46_mst.book

220 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Selección del modo
Cambie el modo a grabación o a reproducción.

Pulse el botón REC/

≥ Cada vez que presiona el botón REC/
HX-WA20

/ HX-WA2

cambia el modo.
HX-DC2

Modo de Grabación

Para grabar imágenes en movimiento,
imágenes fijas y audio

Modo de reproducción

Para reproducir imágenes en
movimiento, imágenes fijas y audio

∫ Cómo usar el botón SET
≥ Utilice el botón SET para seleccionar las funciones de grabación y las
operaciones de reproducción, y para hacer funcionar la pantalla de
menús.
≥ En estas instrucciones de funcionamiento, el botón SET se denomina
como se muestra a continuación.
Ejemplo:
o

Seleccione usando el botón SET

∫ Selección del idioma
1)
2)

Pulse el botón MENU, luego seleccione [
[LANGUAGE].
Seleccione el idioma deseado.

220 VQT4F46

(MENÚ OPCION 2)] >

HX-WA20PPPCPU-VQT4F46_mst.book

221 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Grabación de películas
1)
2)
3)

Cambie al modo de grabación.
Abra el monitor LCD.
Pulse el botón de inicio/parada de grabación para iniciar la
grabación.

HX-WA20

/ HX-WA2

HX-DC2


000:00:00

A Cuando comienza a grabar, aparece ¥.

∫ Grabación de fotografía
1)
2)
3)

Cambie al modo de grabación.
Abra el monitor LCD.
Presione por completo el botón
HX-WA20

/ HX-WA2

para tomar una imagen.
HX-DC2

VQT4F46 221

HX-WA20PPPCPU-VQT4F46_mst.book

222 ページ

２０１２年２月１４日 火曜日 午後５時１０分

∫ Reproducción de película/fotografía
1)
2)
3)

Cambie al modo de reproducción.
Seleccione el archivo a reproducir usando el botón SET y pulse el
botón SET.
Seleccione el icono de operación con el botón SET.
Reproducción de imágenes en movimiento
Reproducción/Pausa
Reproducción de
rebobinado


Reproducción de avance
rápido
Detiene la reproducción y
muestra las miniaturas.

A Icono de funcionamiento*
* Si desaparece el icono de funcionamiento, realice una operación del
botón SET para visualizarlo.
Reproducción de imágenes fijas
Elimina la imagen fija.

Muestra el archivo anterior
Muestra el siguiente archivo
Detiene la reproducción y vuelve a
la visualización de miniatura

222 VQT4F46

HX-WA20PPPCPU-VQT4F46_mst.book

223 ページ

２０１２年２月１４日 火曜日 午後５時１０分

VQT4F46 223

HX-WA20PPPCPU-VQT4F46_mst.book

224 ページ

２０１２年２月１４日 火曜日 午後５時１０分

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3

VQT4F46
1AG6P1P6499--(S)
F0212MZ0

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2012:07:27 14:20:42-07:00
Create Date                     : 2012:02:27 09:52:06+09:00
Metadata Date                   : 2012:07:27 14:20:42-07:00
Format                          : application/pdf
Document ID                     : uuid:4832e8fb-460d-48fe-8a1a-3f81f87a2a9d
Instance ID                     : uuid:70ee8b51-4c29-4ca9-9c63-1b971f53d63f
Page Count                      : 224
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

Panasonic Hx Dc2 Owners Manual

HX-WA20 - Owner’s Manual HXWA20-MUL Free User Guide for Panasonic Camcorder, Manual - page2

Navigation menu

Versions of this User Manual:

Views

Navigation