Parrot Cell Phone 3400 Ls Users Manual Parrot_3400_2 03d_Glofish_X600_TomTomNavigator6
3400 LS to the manual 5f6f1fb5-eca8-4458-8dcb-d23884f330c5
2014-12-13
: Parrot Parrot-Cell-Phone-3400-Ls-Users-Manual-125740 parrot-cell-phone-3400-ls-users-manual-125740 parrot pdf
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Teste with ROM : 030 WWE ETEN Glofish X600 with TomTom Navigator 6 Parrot 3400 LS-GPS Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 SETUP PROCEDURES • • • • Features I/ 3400 LS-GPS Pairing Procedure II/ GPS Connection III/ TomTom Navigator 6 Setup Procedure IV/ Plan a Route Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Features • • • • • • Two Bluetooth connections at the same time : GPS and Handsfree. Voice navigation instructions through PDA headspeakers ONLY Voice navigation instructions are NOT played DURING a call Automatic switch between GPS software and phone applications when using red and green carkits buttons (especially on “Incoming” and “Outgoing” Call) Manual return in navigation after: hanging up with the phone a call, picking up by the phone an “Incoming” call (then discreete mode) Automatic GPS connection (if option activated into Settings/GPS/Settings/ “Connection on Start Up”) Mandatory : Valid GPS signal is needed to establish stable “GPS connection” between Parrot 3400 LS-GPS with ETEN Glofish X600 (otherwise there are GPS disconnections) Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I 3400 LS-GPS Pairing Procedure for Hansfree Connexion Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Parrot 3400 LS-GPS “Idle Mode” with Valid GPS signal Please go into the menu SETTINGS” of the carkit Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Then, go into the menu “PAIR WITH PHONE \ OTHERS PHONES”. The carkit will display a random PIN code. Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure From the Smartphone Idle screen, please select the “START” menu. Select the Configuration Manager Please make sure that the Bluetooth is ‘ON’ Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Then tap on “Search DEVICES” – A search is made ETEN Glofish X600 searches for Bluetooth devices Select your Parrot 3400 LS-GPS Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Position your Parrot into the mode “Settings / Pair a phone / Other phones” Enter the “PIN CODE” displayed by the car kit Activate the HandsFree Handsfree Pairing is done, a connection will be done automatically For the moment, there is no Serial Port services. Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure On the “COM PORTS” tab, please select the “NEW OUTGOING PORT” command Select your Parrot 3400 LS-GPS among the diverse devices found. Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step I – 3400 LS-GPS Pairing Procedure Select the “COMx OUTGOING PORT” (preferentially COM6 or COM7 if possible) An Outgoing COM port has been created Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step II Pairing Procedure for GPS Connexion on the 3400 LS-GPS side Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step II – GPS Connection HandsFree connection is established. Now, let us operate the GPS connection. Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step II – GPS Connection Navigate to the Parrot 3400 LS-GPS menu (the fourth one from the idle mode) Go into the “ACTIVATE / DEACTIVATE” menu of the Parrot 3400 LS-GPS Make sure the GPS feature is “Activated” Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step II – GPS Connection Press the carkit’s RED BUTTON for at least three seconds. Your carkit and your mobile phone will be disconnected and a pop-up “Please connect GPS” appears on the Parrot 3400 LS-GPS Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step III Pairing Procedure for GPS Connexion on the phone side Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step III – TomTom Navigator 6 Setup Procedure Please start your “TomTom Navigator 6” software in the menu “Programs” “TomTom Navigator 6” start screen without GPS signal: you need to configure GPS reception – please tap on the screen Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step III – TomTom Navigator 6 Setup Procedure Tap on “Change Preference” Select the “GPS Status” icon Choose the “Configure” option and validate Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step III – TomTom Navigator 6 Setup Procedure Please select “Other Bluetooth receiver” – then press on “continue” Select the port you have just defined as the GPS channel beforehand (“COM0” for our example) Your Parrot 3400 LS-GPS is now defined as the source of GPS signal for TomTom Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step IV Use the GPS Connexion to navigate Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step IV – Plan a route On the HOME screen, tap on the “Navigate to” icon You have different options available to define your destination. Option #1: Choose “Address” and select “City Center” to define your destination the most simple way. Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step IV – Plan a route Option #2: enter the precise address. Define the City, then the Street, then the number of your destination Option #2: Choose “Advanced Planning”, meaning you need to define depart and destination points Option #2: Choose “Street and house number” for each of theses points Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step IV – Plan a route The TomTom software calculates the journey to the destination you entered Tap on Details to simulate your itinerary, then “Display a demo of the itinerary”, then select the speed of demo (200%) The simulation is launched Parrot 3400 LS-GPS with ETEN Glofish X600 and TomTom Navigator 6 Step IV – Plan a route Navigation with “TomTom Navigator 6”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 24 Producer : AFPL Ghostscript 8.53 Create Date : 2008:04:23 15:33:08+02:00 Modify Date : 2008:04:23 15:33:08+02:00 Title : Parrot_3400_2-03d_Glofish_X600_TomTomNavigator6 Creator : PDFCreator Version 0.9.0 Author : o.pastorelli Subject :EXIF Metadata provided by EXIF.tools