Passtime USA DDD1RX Dock device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3584358
Application ID	mRf+I2B9mLh7Dzr2ALWQbQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.8kB (460008 bits)
Date Submitted	2017-09-28 00:00:00
Date Available	2018-03-28 00:00:00
Creation Date	2017-08-25 12:36:48
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-09-22 17:17:45
Document Title	DDD_Quick_Installation_Guide_v1.1_Revision Draft 082317
Document Creator	Adobe Illustrator CC 2017 (Windows)
Document Author:	Ron Spomer

INSTALLATION DIAGRAM
The Distracted Driving Device (DDD) system is comprised of two separate devices, the DDD
Communication Device (PTE-5) and the DDD Handset Dock (DDD-1). Both devices will need to be
installed in the vehicle as shown in this document.
WIRING DIAGRAM
Key
Pink (Ignition)
hot while engine
cranking
Comm Device (PTE-5)
Dock (DDD-1)
Blue (Starter In)
Pin 4
Pin16
Fuse
Starter Control Circuit
Purple (Starter Out)
Red (12v Constant)
Black (Ground)
(Cut)
Starter
OBDII
If you are making the connections directly at the battery, you MUST use a 3A size inline fuse
(as shown). This is a safety precaution in the case of a nicked or pinched wire contacting
metal.
STEP 1: INSTALL COMM DEVICE
POTENTIAL INSTALLATION LOCATIONS
The Comm Device (PTE-5) should be
installed as high in the dash as possible to
ensure the best performance and to help
prevent tampering.
• Above or behind instrument cluster
• Above any accessible air vents
• Above or behind the radio
Note: When mounting the device, the LED’s must be facing up and the device should not be obstructed by metal.
Page 1
© 2017 Distracted Driving Device, LLC.
No party may republish, copy, redistribute, sell or offer for sale to any third party this material or any part of it without express written
permission of the authors.
DEVICE HARNESS ELECTRICAL
CONNECTIONS
NOTE: For all connections, soldering is recommended.
Posi-tap and butt connectors are also acceptable (as
shown).
GROUND - Attach to a secured bare metal chassis
ground location such as to a new or existing threaded
fastener, or to a grounded circuit such as Pin 4 of the
OBDII connector (as shown).
12v CONSTANT - Any 12v constant source, that is not
being monitored by the computer for voltage draw, can
be used, like Pin 16 of the OBDII connector (as shown).
Use inline fuse if going direct to the battery.
NOTE: In late model vehicles, starter and ignition connections
should be made under hood, near main fuse relay. If harness wires
are not long enough, use 3-in-1 wire or equivalent to extend
harness (as shown).
IGNITION WIRE NOTE:
STARTER WIRE
When making these
connections, use grommets if wires
must penetrate the firewall and
use adequate looming if placing
wires in the engine compartment
to protect from hot metal surfaces
and corrosive liquids.
IGNITION WIRE- a wire with 12V in “key on” and
“crank” positions.
STARTER WIRE - the wire with 12V in “crank”
position only. Once the starter wire is cut,
connect Harness blue wire to key side of starter.
Connect Harness purple wire to solenoid side.
Page 2
© 2017 Distracted Driving Device, LLC.
No party may republish, copy, redistribute, sell or offer for sale to any third party this material or any part of it without express written
permission of the authors.
STEP 2: INSTALL DOCK
Install Dock in glove compartment (as shown). Make small hole near Dock location for Ground & 12V Constant
wires to pass through. Zip-tie wires underneath glove compartment to secure Dock and prevent removal from
mounted location.
Note: Please ensure Dock
location and placement will
allow unrestricted access by
the user to insert their handset
into the Dock and easily
secure it using the rubber
strap.
Dock Ground Wire- Bare metal or a common
ground connection is recommended on the
passenger side of vehicle (as shown).
Dock 12V Constant Wire- Connect Dock 12V
Constant to inline fuse (size 3A). Then connect
inline fuse to Harness 12V Constant connection
as made previously at OBDII connector.
Page 3
© 2017 Distracted Driving Device, LLC.
No party may republish, copy, redistribute, sell or offer for sale to any third party this material or any part of it without express written
permission of the authors.
STEP 3: ACCOUNT SETUP
A) Download the App
Use of the Distracted Driving Device requires the installation of the Distracted Driving Device
Application on the user’s handsets (smart phones). The Application can be quickly located by
scanning the following QR Code.
B) Find the labels
During the setup of the Application, the user will need to enter the serial numbers of the Comm Device
(PTE-5) and the Dock (DDD-1). These serial numbers can be located on the bottom of the devices as well as
on the outside of the box as shown below.
DDD-1
DockSN 00000000
PTE-5
EliteSN 00000000
C) Scan the barcodes
Following the in-App instructions, scan the barcode (or manually enter
serial number) for each device.
D) Complete Account Setup
Follow the instructions in the App to complete the device pairing and account setup.
EMERGENCY OVERRIDE:
The Emergency Override is failsafe to be used in the event the required phone has been lost, has a dead battery
or is otherwise malfunctioning. When the Emergency Override is used to start the vehicle, a message will be sent
to the vehicle owner advising of its use. The DDD system may be bypassed by turning the key to the ignition
position and then off 5 times in succession. The vehicle will then be permitted to start without a docked handset.
Need Help?
Visit: DistractedDrivingDevice.com or Call 1-800-579-9077
Page 4
© 2017 Distracted Driving Device, LLC.
No party may republish, copy, redistribute, sell or offer for sale to any third party this material or any part of it without express written
permission of the authors.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Ron Spomer
Create Date                     : 2017:08:25 12:36:48-06:00
Modify Date                     : 2017:09:22 17:17:45+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : Adobe Illustrator CC 2017 (Windows)
Metadata Date                   : 2017:09:22 17:17:45+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 52
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5544 bytes, use -b option to extract)
Producer                        : Adobe PDF library 15.00
Format                          : application/pdf
Creator                         : Ron Spomer
Title                           : DDD_Quick_Installation_Guide_v1.1_Revision Draft 082317
Document ID                     : xmp.did:dcca6771-d2dd-eb4e-8b71-c18eebc1e964
Instance ID                     : uuid:1b3a0a87-04bd-4e73-b504-32a62e0afedd
Original Document ID            : xmp.d
Rendition Class                 : proof:pdf
History Action                  : editedScannedDoc, saved, saved
History When                    : 2017:06:06 15:09:29-06:00, 2017:06:23 10:14:29-06:00, 2017:08:25 12:36:40-06:00
History Parameters              : Page:1
History Instance ID             : xmp.iid:778ce9f3-f552-6642-a9a6-5e10ccbe63c5, xmp.iid:dcca6771-d2dd-eb4e-8b71-c18eebc1e964
History Software Agent          : Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CC 2017 (Windows)
History Changed                 : /, /
Derived From Instance ID        : uuid:5e3de371-dd40-4710-b87f-009b9c83c130
Derived From Document ID        : xmp.did:bfabb0bc-ea62-a941-abc8-601e25207f1c
Derived From Original Document ID: xmp.d
Derived From Rendition Class    : proof:pdf
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : H:\Work Docs\Install Guides\Distracted Driving Device\DDD Box Image no bg.jpg, H:\Work Docs\Install Guides\Distracted Driving Device\App Screen Shots Scanning Process v02\8.1.2 ENTER CODES.png, H:\Work Docs\Install Guides\Distracted Driving Device\App Screen Shots Scanning Process v02\8.2 SCAN CODE 01.png, H:\Work Docs\Install Guides\images\Elite5.1.png, H:\Work Docs\Install Guides\images\Dock3.png, H:\Work Docs\Install Guides\images\elite install10.jpg, H:\Work Docs\Install Guides\images\elite install7.jpg, H:\Work Docs\Install Guides\images\elite install9.jpg, H:\Work Docs\Install Guides\images\elite install5.jpg, H:\Work Docs\Install Guides\images\elite install6.jpg, H:\Work Docs\Install Guides\images\elite install4.jpg, H:\Work Docs\Install Guides\images\elite install3.jpg, H:\Work Docs\Install Guides\images\elite install2.jpg, H:\Work Docs\Install Guides\images\Elite install1.jpg, H:\Work Docs\Install Guides\images\inline fuse2.png, H:\Work Docs\Install Guides\images\elite install8.jpg
Manifest Reference Document ID  : adobe:docid:photoshop:b960608a-884f-11e7-b387-c7ff0afab010, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, adobe:docid:photoshop:ab06fcb7-5b88-11e7-9d11-c2c74e313d1d, 0
Manifest Reference Instance ID  : xmp.iid:06d586f5-4d1e-1240-8bb8-4eb392daa8fe, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, xmp.iid:16a61914-17a9-d045-bae1-bffd672c5aa1, 0
Ingredients File Path           : H:\Work Docs\Install Guides\Distracted Driving Device\DDD Box Image no bg.jpg, H:\Work Docs\Install Guides\Distracted Driving Device\App Screen Shots Scanning Process v02\8.1.2 ENTER CODES.png, H:\Work Docs\Install Guides\Distracted Driving Device\App Screen Shots Scanning Process v02\8.2 SCAN CODE 01.png, H:\Work Docs\Install Guides\images\Elite5.1.png, H:\Work Docs\Install Guides\images\Dock3.png, H:\Work Docs\Install Guides\images\elite install10.jpg, H:\Work Docs\Install Guides\images\elite install7.jpg, H:\Work Docs\Install Guides\images\elite install9.jpg, H:\Work Docs\Install Guides\images\elite install5.jpg, H:\Work Docs\Install Guides\images\elite install6.jpg, H:\Work Docs\Install Guides\images\elite install4.jpg, H:\Work Docs\Install Guides\images\elite install3.jpg, H:\Work Docs\Install Guides\images\elite install2.jpg, H:\Work Docs\Install Guides\images\Elite install1.jpg, H:\Work Docs\Install Guides\images\inline fuse2.png, H:\Work Docs\Install Guides\images\elite install8.jpg
Ingredients Document ID         : adobe:docid:photoshop:b960608a-884f-11e7-b387-c7ff0afab010, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, adobe:docid:photoshop:ab06fcb7-5b88-11e7-9d11-c2c74e313d1d, 0
Ingredients Instance ID         : xmp.iid:06d586f5-4d1e-1240-8bb8-4eb392daa8fe, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, xmp.iid:16a61914-17a9-d045-bae1-bffd672c5aa1, 0
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 8.500000
Max Page Size H                 : 11.000000
Max Page Size Unit              : Inches
Font Name                       : Arial-Black, ArialMT, Lato-Bold, Lato-Regular, Lato-Semibold, MyriadPro-Bold, MyriadPro-Regular
Font Family                     : Arial, Arial, Lato, Lato, Lato, Myriad Pro, Myriad Pro
Font Face                       : Black, Regular, Bold, Regular, Semibold, Bold, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.22, Version 6.90, Version 2.007; 2014-02-27, Version 2.007; 2014-02-27, Version 2.006; 2014-01-15, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : ariblk.ttf, arial.ttf, , , , MyriadPro-Bold.otf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : R=243 G=10 B=11, C=17 M=75 Y=80 K=5, C=7 M=39 Y=100 K=0, C=74 M=60 Y=5 K=0, C=55 M=18 Y=37 K=0, PANTONE P 179-12 U, PANTONE P 10-7 C, PANTONE P 154-8 C, PANTONE P 179-16 C, PANTONE P 179-15 C, PANTONE P 179-13 C, C=48 M=27 Y=0 K=0
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant Mode            : RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB
Swatch Colorant Red             : 237, 198, 233, 85, 121, 92, 255, 107, 35, 50, 83, 132
Swatch Colorant Green           : 28, 92, 162, 107, 171, 93, 198, 189, 31, 49, 84, 164
Swatch Colorant Blue            : 36, 65, 34, 170, 163, 95, 61, 68, 32, 50, 86, 214
Page Count                      : 4

EXIF Metadata provided by EXIF.tools