Paxton Access 390135 Proximity Panel Mount Reader User Manual INSTRUCTION PROXIMITY metal reader UL

Download:
Mirror Download [FCC.gov]
Document ID	1701095
Application ID	L234D92T6HEmCd9giKn7AQ==
Document Description	manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.98kB (449719 bits)
Date Submitted	2012-05-18 00:00:00
Date Available	2012-05-21 00:00:00
Creation Date	2012-04-23 13:37:41
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2012-04-23 13:38:26
Document Title	INSTRUCTION - PROXIMITY metal reader - UL
Document Creator	Adobe InDesign CS5 (7.0.4)

03/15/2012
Ins-40049-US
Paxton
PROXIMITY metal reader - UL
Technical Support
1.800.672.7298
supportUS@paxton-access.com
Technical help is available:
Monday - Friday from 02:00 AM - 8:00 PM (EST)
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
For instructions in alternative languages - http://paxton.info/1000
Suitability
Security sensitive doors
Wet environments
Mounted on metal surface
Readers mounted together
Mounting
This reader is designed to read Paxton Tokens (Hitag2) and EM4100 tokens.
It will provide Clock and Data output for Paxton (Net2 / Switch2).
PAGE 1
Options
Part number
Description
390-747-US
PROXIMITY metal reader
Wiring
+V o ut
Red
Red LED
Brown
Power
Power
Relay 1
Relay 1
Relay 2
Relay 2
00v
Inputs
0V
0v
Inputs
CAUTION: for 12v d.c. readers only. For
correct connection of old 5v readers, refer to
instructions.
Serial number
241821
N.O.
N.O.
Com
Com
Contact
Contact
Exit
Exit
00v
PSU
PSU
5v
12V
12v
OK
OK
PSU
PSU
Exit
Exit
Tx
Tx
Rx
Rx
Tamper
Tamper
Amber LED
Orange
24898 00000
OOrange
range
Com
Com
Tamper
Tamper
Contact
Contact
Relay22
Relay
White/O
range 3
White/Orange
Relay
Relay11
Green
Green
N.O.
N.O.
Alarm
Output
Alarm
Output
NetwoNetwork
rk
CCAT5
AT5 cacable
ble codcoding
ing
White/Green
White/Green 1
0V 0v
N.C.
N.C.
Screen or
from
Screen
orspare
sparecores
cores
network
cable
from
network
cable
12V
+12v
N.C.
N.C.
Keypad 1
Clock
Orange
Keypad 1
Load
Brown
Test ID: 012345678901
0V out
Black/White
Data
Yellow
z-1440
Media Detect
Mauve
Green LED
Green
Clock/D1
Blue
BlueClock/D1
Data/D0
Yellow
Media Detect
Mauve
0V out
Black/White
Data/D0
Yellow
Reader 2
Net2
Reader 1
Green LED
Green
Reader 2
Keypad 2
Reader 1
Amber LED
Orange
Brown
Load
Data
Yellow
Orange
Clock
Keypad 2
outdc
Red+V
12v
Red LED
Brown
Net2 control unit
Switch2 control unit
Green LED
Green
Yellow
Data/D0
Blue
Clock/D1
Alarm
Power
Door relay
Control
unit
Amber LED
Orange
Door relay
Card reader or keypad
Card reader or keypad
Red LED
Brown
PowerAlarm
SSwitch2
witch
Red12V
12V
Bell
Bell
12V
12v
0V
0v
N.C.
N.C.
N.O.
N.O.
COM
Com
Mauve
Media Detect
Black
0V
CAUTION:
For readers
12Vd.c.only.
CAUTION:
For 12V d.c.
readers only. For correct
For correct connection of old readers,
connection of old readers,
refer to instructions.
refer to instructions.
Inputs
Exit
Exit
Inputs
Contact
Contact
Cable extensions
Cable Specification
Use
Max length
Reader / Keypad
500 feet
Type
8 core shielded, Beldon 9538, Alpha 1298C (22AWG) or equivalent
PAGE 2
Parts list
Part number
Fitting Kit fk1-058
Description
4 off - M5x20 Security button socket pin head machine screw
4 off - No8 x 11/2in pozi round woodscrew - zinc
4 off - Wall plugs 35mm, red
1 off - 3mm socket pin head Allen key
Reader installation and test
Drill a hole in the surface for the rear data cable. Secure the mounting plate to the surface with four screws as per
fitting diagram on page 1. Suitable screws and fixings are provided for fitting the plate to a wall.
Mount the reader on its backplate and secure with the security screws using the Allen key supplied. Ensure the
data cable has free access at the rear.
The reader will bleep and all the LEDS should display after powering on the control unit. Presenting a user card to
the reader will cause the LEDs to briefly change to a single Green or Red LED.
Check the following FAQs section for assistance if any problems are encountered.
Maintenance
Following the completed installation of this equipment, no further maintenance or testing is required.
It is advisable to ensure that any third party backup power supplies or recovery procedures are checked regularly
to ensure that the operation of the Paxton system is not compromised.
Product compliance and limitations
To comply as a UL listed installation, the following conditions must apply:Server based functions (Antipassback, Time and Attendance, etc) have not been evaluated by UL and cannot be used
for UL 294 installations.
The use of Wiegand readers and the configuration software has not been evaluated by 'UL'
Wiring: - Where an equivalent cable / wire is used it must be ' UL Listed '
All interconnecting devices must be UL Listed.
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the
authorities having jurisdiction.
For CAN/ULC-S319 installations, terminals, leads and wiring methods must comply with CSA, C22.1, Canadian
electrical code, Part 1, safety standards for electrical installations.
The use of any add-on, expansion, memory or other module manufactured or supplied by the manufacturer's
representative will invalidate the CAN/ULC-S319 certification.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 3
Technical Help
Here is the list of topics about this product that receive the most technical support inquiries.
We list them here to help you speed up the installation and trouble shooting process.
1 - Readers/Keypads not working.
Q- Software settings - Confirm that the settings of the reader or keypad are correct.
Q- Connections - Check the wiring and integrity of the connectors. If possible, test this reader on the other port.
Q- Extended cable - Belden 9538/9540 should be used up to a maximum of 500 feet. Twisted pair alarm cable should
Q not be used. To confirm that an extended reader cable is not at fault, wire the reader directly to the port.
Q- Supply voltage - Confirm that the voltage is within specification. (see table)
Q- User token - Confirm that the user token used for testing is OK by presenting it to a known working reader.
Q- Interference - Confirm whether the reader works when tested 'in hand' and not mounted on the wall.
Q PROXIMITY readers should not be mounted back to back or close to other RF devices.
2 - Readers / Keypads - Extending cable.
QOnly Belden CR9538 / 9540 or a UL equivalent can be used for cable extensions. The maximum run is 500 feet.
3 - Net2 - Using a door reader as a desktop reader.
QIt is possible to configure a door reader to operate as a desktop reader:
Q1 - Select the doors menu in the left hand Net2 pane.
Q2 - Click on the door you wish to change the reader to act as a desktop reader.
Q3 - Under the relevant reader tab, change the reader operating mode to 'Desktop Reader'.
Q4 - The PC displays 'Would you like to accept desktop reader events from this reader at the PC?' ; click 'Yes'
Now when you present a blank or existing token to that reader it will allow you to add this new token or edit
the existing one.
NOTE:QRemember to return the operating mode to the original setting once the cards have been read
or users will not be able to gain access through the reader.
Q KP Reader - Ensure that Keypad type is set to 'None', otherwise the Desktop reader option will not be available.
4 - Net2. What to do if a user has no access - Check the reader LED's when a card is shown.
Q- No LED's - the reader has no power.
Q- No change in display - try the card on a known working reader. If there is still no response, replace the card.
Q- Green LED flashing when a card is presented; check relay 1 LED to check for activity and also the lock wiring.
Q- Red LED is flashing when a card is presented; check the validity of the user at the PC.
Q Check user's access level and ensure they should have access by clicking on Current Validity.
Q Check the 'Expires end' date and confirm this has not been past.
Q- Reinstate the ACU from the doors screen. Select the ACU's you wish to reinstate and then click OK.
Specifications
Environment
Operating temperatures - all items
Waterproof
Min
Max
-35 °C ( -31 °F )
+66 °C ( + 151 °F )
IPX7
Outdoor use
Cable length
Electrical
10 feet
Min
Max
12V DC
Voltage
110 mA
Current
125 kHz
Carrier frequency
Clock and data bit period
Read Range
Dimensions
600 µs
Token
Keyfob
Hands Free Token
2 inch
11/2 inch
Not Compatible
Width
Height
3 inch
3 inch
Depth
1 inch
PAGE 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2012:04:23 13:37:41+01:00
Modify Date                     : 2012:04:23 13:38:26+01:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:04:23 13:38:26+01:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 8482 bytes, use -b option to extract), (Binary data 7865 bytes, use -b option to extract)
Instance ID                     : uuid:e60212b6-6537-4830-8318-20f963166bdd
Document ID                     : adobe:docid:indd:e2ab0099-0d60-11de-ae08-f593bd83f340
Original Document ID            : adobe:docid:indd:e2ab0099-0d60-11de-ae08-f593bd83f340
Rendition Class                 : proof:pdf
Derived From Instance ID        : f219e0b2-cde4-11dd-8ecd-f4e3c142fb8b
Derived From Document ID        : adobe:docid:indd:ddd3f2b7-41dc-11dd-8557-b3de2a148bae
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:4D92F1AEA5CFDF118BBFC31BDA4B782F, xmp.iid:4E92F1AEA5CFDF118BBFC31BDA4B782F, xmp.iid:5292F1AEA5CFDF118BBFC31BDA4B782F, xmp.iid:5392F1AEA5CFDF118BBFC31BDA4B782F, xmp.iid:7BB45553A6CFDF118BBFC31BDA4B782F, xmp.iid:7FB45553A6CFDF118BBFC31BDA4B782F, xmp.iid:80B45553A6CFDF118BBFC31BDA4B782F, xmp.iid:81B45553A6CFDF118BBFC31BDA4B782F, xmp.iid:C7E2B4CAB2CFDF1196E9D94DA86621B0, xmp.iid:CBE2B4CAB2CFDF1196E9D94DA86621B0, xmp.iid:90B6FF53B4CFDF11A64BC7C28A0A1B8C, xmp.iid:1CFEEAE070C9E0119F8E8A37D28AAB0B, xmp.iid:21FEEAE070C9E0119F8E8A37D28AAB0B, xmp.iid:22FEEAE070C9E0119F8E8A37D28AAB0B, xmp.iid:D061B06372C9E0119F8E8A37D28AAB0B, xmp.iid:D561B06372C9E0119F8E8A37D28AAB0B, xmp.iid:1528DECF72C9E0119F8E8A37D28AAB0B, xmp.iid:1872DA049267E1118F5DEFA2CACA4044, xmp.iid:1972DA049267E1118F5DEFA2CACA4044, xmp.iid:37EE79CE9467E1118F5DEFA2CACA4044, xmp.iid:3CEE79CE9467E1118F5DEFA2CACA4044, xmp.iid:41EE79CE9467E1118F5DEFA2CACA4044, xmp.iid:3030234B9967E1118F5DEFA2CACA4044, xmp.iid:2DAEEEFAC469E1119E2C9ABEF693E8F7, xmp.iid:0A4C8DB5C16DE1118842A1E562956754, xmp.iid:89A698EF8D6EE111AEB4F93F9B5961A6, xmp.iid:8EA698EF8D6EE111AEB4F93F9B5961A6, xmp.iid:93563C5E0F83E111B848D0D36F363F79, xmp.iid:98563C5E0F83E111B848D0D36F363F79, xmp.iid:F4F825CE0F83E111B848D0D36F363F79, xmp.iid:A3F87E08418DE111BCA8F65422587D63
History When                    : 2010:10:04 11:53:55+01:00, 2010:10:04 11:53:55+01:00, 2010:10:04 11:54:24+01:00, 2010:10:04 11:55:17+01:00, 2010:10:04 11:58:31+01:00, 2010:10:04 11:59:10+01:00, 2010:10:04 11:59:33+01:00, 2010:10:04 12:01:16+01:00, 2010:10:04 13:27:45+01:00, 2010:10:04 13:29:15+01:00, 2010:10:04 13:38:45+01:00, 2011:08:18 09:05:46+01:00, 2011:08:18 09:13:07+01:00, 2011:08:18 09:14:27+01:00, 2011:08:18 09:16:35+01:00, 2011:08:18 09:17:48+01:00, 2011:08:18 09:19:37+01:00, 2012:03:06 13:41:04Z, 2012:03:06 13:46:50Z, 2012:03:06 14:01:01Z, 2012:03:06 14:06:06Z, 2012:03:06 14:07:56Z, 2012:03:06 14:33:08Z, 2012:03:09 08:50:54Z, 2012:03:14 10:37:34Z, 2012:03:15 10:59:28Z, 2012:03:15 11:00:38Z, 2012:04:10 14:16:22+01:00, 2012:04:10 14:18:35+01:00, 2012:04:10 14:19:30+01:00, 2012:04:23 13:37:05+01:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 965
Format                          : application/pdf
Title                           : INSTRUCTION - PROXIMITY metal reader - UL
Creator                         : 
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools