Paxton Access 477268 Net2Air USB Bridge User Manual INSTRUCTION Net2Air USB bridge
Paxton Access Ltd Net2Air USB Bridge INSTRUCTION Net2Air USB bridge
User Manual
05/09/2008 Paxton Access ins-30084-US Net2Air USB bridge Technical Support 1 800 672 PAXT Technical help is available: support@paxton.co.uk Monday - Friday from 5am - 5pm PST / 8am - 8pm EST Documentation on all Paxton Access products can be found on our web site - http://www.paxton-access.com/ Net2Air wireless communication The Net2 nano control unit connects to the central administration PC using Paxton Access’ Net2Air proprietary wireless technology. Control units communicate to the PC via a Net2Air USB bridge or Net2Air Ethernet bridge. Unfortunately, radio signals do not always behave as you might expect. For example, a mobile phone that displays a full signal on one part of the site will loose signal completely only a few metres away. The main problem in an office environment are signal reflections from the walls, floor and office furniture. A strong signal received directly from the bridge may be completely cancelled by a signal reflected via the floor. See also: XAN1095 - Net2 nano - How does it work? < http://paxton.info/974 > AN1096 - How to plan a Net2 nano installation < http://paxton.info/975 > Ins-30096 - Net2Air site surveyor < http://paxton.info/1015 > Reader Control unit Net2Air USB bridge Net2 nano is a wireless based 1 door access control unit. It is recommended that a Net2Air site surveyor is used to determine the best position for the bridge and units. Software - Requires Net2 v4.13 or later Plug the device into a spare USB port on the PC. The bridge will be registered by the Net2 software automatically. This displays in the Net2 Server Configuration Utility/Net2Air bridge as a fixed IP entry. NOTE: Only ONE Net2Air USB bridge can be configured per system. Multiple Net2Air Ethernet bridges may also be configured, up to 50 bridge nodes in total. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Layout USB connection cable Power USB activity Net2Air activity The bridge should be mounted vertically in the supplied base to achieve the optimum range Changing frequency channel If you are experiencing problems with the range or reliability this may be due to poor nano / bridge positioning or adjacent interfering 2.4 GHz equipment, e.g. an adjacent wireless PC network. The system has fifteen different channels available. The unit is set to channel 11 as this frequency is normally clear of other device transmissions. Technical support can advise how to change the channel if interference is the cause of the problem. IEEE 802.15.4 channel GHz IEEE 802.15.4 channel 11 2.405 19 2.445 12 2.41 20 2.45 13 2.415 21 2.455 14 2.42 22 2.46 15 2.425 23 2.465 16 2.43 24 2.47 17 2.435 25 2.475 18 2.44 GHz This equipment complies with FCC radiation exposure limits set forth for use in a General Population/ Uncontrolled environment. This equipment should be operated with a minimum distance of 20cm between the radiator and your body. Specifications System Specification ACUs per Net2Air bridge Min Max 10 Net2Air USB bridge per system Carrier frequency 2.4 GHz 30 m Net2Air wireless range to ACU Electrical Voltage Min Max 4.75 V 5.25 V 150 mA Current Environment Operating temperature Min Max -20 °C 55 °C Width Height Length 70 mm 195 mm 100 mm Waterproof Dimensions USB certified No
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:a4beab12-5ce0-4615-be8f-7e95c80a7914 Producer : Adobe PDF Library 7.0 Trapped : False Create Date : 2008:09:05 11:10:16+01:00 Metadata Date : 2008:09:05 11:11:12+01:00 Modify Date : 2008:09:05 11:11:12+01:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10427 bytes, use -b option to extract) Instance ID : uuid:01c7e558-5c52-4c6a-b866-f82bfe6915a4 Rendition Class : proof:pdf Document ID : adobe:docid:indd:1002a211-7b2e-11dd-af99-df48ce0f1a27 Derived From Instance ID : e129f2ac-7b2c-11dd-9fa6-84308db89c2b Derived From Document ID : adobe:docid:indd:91f3e3b1-150d-11dd-ac35-b86ec7211e56 Manifest Link Form : ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:61683EBE6238DD11AF9BC1BC5E660874 Manifest Reference Document ID : adobe:docid:photoshop:b8ce35ba-1527-11dd-983f-9122986037d7, adobe:docid:photoshop:644773bd-0159-11dd-aaab-a393e6bd41cc Format : application/pdf Title : INSTRUCTION - Net2Air USB bridge Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools