100841 Catalog
2014-07-05
: Pdf 100841-Catalog 100841-Catalog 781381 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 562
Download | |
Open PDF In Browser | View PDF |
LIGHTING Corrosive elements. Combustible dusts. Flammable gases and vapors. For proper illumination in extreme conditions, you need a company that pushes safety to the extreme. Appleton has expanded the boundaries of technology, efficiency and performance to ensure your lighting stays on – and safe. Because failure just isn’t an option. LIGHTING Lighting Lighting Lighting Description Page Enclosed and Gasketed — Area — HID Mercmaster™ III Luminaires Family Tree 920 Mercmaster™ III Low Profile Luminaires 922 Mercmaster™ III HID 50—250 Watt Luminaires 941 Mercmaster™ III 400 Luminaire for Hazardous and Wet Locations 976 ATX LN Series Wellglass Luminaires 995 Mercmaster™ II HID Luminaires 1005 Mercmaster™ Jr. Luminaires 1021 MMIII Low Profile MMIII 50-250 MMIII 400 LN Series MMII MM Jr. MM LED MMIII Induction MMIII Low Profile Enclosed and Gasketed — Area — LED/Induction Mercmaster™ LED Luminaires 1028 Mercmaster™ III Induction Luminaires 1037 Enclosed and Gasketed — Area — Fluorescent Mercmaster™ III Low Profile Compact Fluorescent Luminaires 1055 FV™ Series Nonmetallic Fluorescent Luminaires 1070 FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires 1075 ATX FE Series Nonmetallic Fluorescent Luminaires 1081 ATX FL Series Light Duty Nonmetallic Fluorescent Luminaires 1095 ATX FN Series Heavy Duty Nonmetallic Fluorescent Luminaires 1100 RigMaster™ Metallic Fluorescent Luminaires 1106 RigMaster™ 304 Stainless Steel Fluorescent Luminaires 1111 VRS™ and DRS™ Fluorescent Luminaires 1113 FV Series FR Series FL Series FN Series RigMaster™ Metallic RigMaster™ 304 Stainless Steel — V V Enclosed and Gasketed — Area — Recessed Fluorescent RE Series Recessed Fluorescent Luminaires 1119 VRS/DRS Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 913 Lighting Lighting Lighting Description Page Enclosed and Gasketed — Area — Incandescent Stylmaster™ Incandescent Luminaires 1126 V—51 Incandescent Luminaires 1135 REA™ 150 W Incandescent Luminaires 1147 ® Stylmaster V—51 REA Areamaster 100 Areamaster 250/400 Areamaster 1000 PN Series Corroflood Wallmaster — V Enclosed and Gasketed — Floodlight Areamaster™ 100 Wide—Beam Floodlights 1149 Areamaster™ 250/400 Integrally Ballasted Floodlights 1155 Areamaster™ 1000 Floodlights 1162 ATX PN Series Floodlights – Zone 2, 21 and 22 1166 Corroflood™ 250/400 Stainless Steel Floodlights 1171 Wallmaster I/2 for Hazardous and Wet Locations — Class I, Division 2/Zone 2 1174 V TVA Obstruction, Approach and Boundary Luminaires 1176 V Stylmaster™ Strobe Luminaires 1180 Enclosed and Gasketed — Visual Signal Enclosed and Gasketed — Emergency Mercmaster™ III Emergency Battery Pack 1184 N2LS™ Series Emergency Luminaires 1200 Explosionproof — Area — HID Code•Master Jr.™ HID Factory Sealed Luminaires 1205 Code•Master 2™ HID Factory Sealed Luminaires 1216 TVA — V Stylmaster Strobe MMIII Emergency Battery Pack N2LS Explosionproof — Area — Induction Code•Master 2™ Induction Lighting System 1231 Code•Master Jr 914 Code•Master 2™ Code•Master 2 Induction Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting Lighting Lighting Description Page Explosionproof — Area — Fluorescent Code•Master™ PLT Factory Sealed Luminaires 1240 APL Two and Four Lamp Fluorescent Factory Sealed Luminaires 1252 EFU Fluorescent Factory Sealed Luminaires 1256 PAPL Portable Two and Four Lamp Fluorescent Factory Sealed Luminaire 1260 ATX FD Series Cylindrical Fluorescent Luminaires 1262 Code•Master PLT APL EFU Explosionproof — Area — Incandescent Code•Master™ Incandescent Factory Sealed Luminaires 1269 A—51 Incandescent Factory Sealed Luminaires 1274 EDT Incandescent Luminaires 1288 ® PAPL FD Series Explosionproof — Floodlight Code•Master 2™ HID Factory Sealed Floodlights 1289 EFL Series HID and Quartz Floodlights 1297 PB, PC & PL Series 1300 Explosionproof Floodlights 1306 V Code•Master A-51 EDT Code•Master 2 EFL/PB/PC/PL Explosionproof Code•Master Strobe TCH Series AHL Explosionproof — Visual Signal Code•Master™ Factory Sealed Strobe Luminaires 1308 Explosionproof — Portable TCH Series Safety Flashlights 1314 AHL and EHL Incandescent Factory Sealed Luminaires and Handlamps 1316 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 915 Lighting Lighting Lighting Description Page Explosionproof — Emergency Code•Master 2™ Emergency PLT Factory Sealed Luminaires 1318 ELS Series Emergency Lighting System 1327 Increased Safety/Flameproof — Bulkhead ATX HBE Series Round Bulkhead Luminaires 1133 ATX HBD Series Bulkhead Luminaires 1336 ATX HBN Series Round Bulkhead Luminaires 1341 ATX HBDC Series Cylindrical Bulkhead Luminaires 1344 Code•Master 2 Emergency PLT General Lighting — Area — High Bay HBE/HBN Series Baymaster 250/400™ High Bay Luminaires 1347 Baymaster Prismatic 250/400™ High Bay Luminaires 1353 Super-Baymaster High Bay Luminaires 1358 Baymaster 1000™ High Bay Luminaires 1361 ELS Series HBD Series HBDC Series V General Lighting — Area — Low Bay Lumenmaster 250™ Low Bay HID Prismatic Luminaires 1365 Lumenmaster 400™ Low Bay HID Prismatic Luminaires 1370 Baymaster 250/400 Baymaster SuperPrismatic 250/400 Baymaster — V Baymaster 1000 General Lighting — Area — Floodlights Quartzlite™ 50 Floodlight 1375 Quartzlite™ 500/1500 Floodlight 1376 Areamaster Jr.™ HID Wide-Beam Floodlights 1379 Beam-Master™ Floodlights 1383 Lumenmaster 250 Quartzlite 50/500 916 Lumenmaster 400 Areamaster Jr Beam-Master Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting Lighting Lighting Description Page General Lighting — Area — Architectural Wallmaster™ HPS/PSMH Luminaires 1386 Wallmaster™ 400 HPS/PSMH Luminaires 1390 Areamaster Squarelite™ 400 Sharp Cutoff Luminaires 1395 Wallmaster Wallmaster 400 Areamaster Squarelite General Lighting — Area — Poles and Hangers Round Tapered Steel Poles 1499 Hinged Steel Poles 1400 Square Tapered Steel Poles 1401 Square Steel Poles 1402 Floodlight Mounting Brackets 1403 UNJ AL JB SSH Flexible Fixture Hangers — Ordinary Location AHG and UNJ Flexible Fixture Hangers 1407 AL Ball and Cushion Flexible Fixture Hangers 1408 JB and GS Flexible Fixture Hangers 1412 SSH Flexible Fixture Hangers 1414 SHC Flexible Fixture Hangers 1416 Flexible Fixture Hangers — Hook and Loop 1417 Flexible Fixture Hangers — Receptacle and Hook and Loop 1420 Power Hook for Industrial High Bay Luminaires 1421 V BKX Rigid Fixture Hangers 1422 CPU and EFHU Fixture Hangers 1424 V Flexible Fixture Hangers, EXJF Couplings, ESD and ESS Swivels 1427 EFHC and EFHCA Fixture Hangers and Accessories 1430 GRF Conduit Outlet Boxes and Fixture Hanger Covers and Canopies 1432 Fixture Hanger Bracket and Accessories 1434 Mounting Poles SHC Hook and Loop Receptacle and Power Hook — V Hook and Loop Flexible Fixture Hangers — Explosionproof Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 BKX CPU ESD EFHC GRF Bracket 917 Lighting Lighting Lighting Description Page McGill Temporary HID Temporary Lighting 1436 String-O-Lights 1437 7000 Series Industrial Extension Lights 1439 7000-38 Series Industrial Extension Lights 1442 6000 Series Commercial-Duty Extension Lights 1443 5000 Series Industrial Extension Lights 1444 Industrial Extension Lights 1446 Handy Compact Fluorescent Work Light 1447 Rough Service Fluorescent Lamp 1448 Fluorescent Work Lights 1449 Battery Pack with Charger 1450 Fluorescent Industrial Extension Lights 1451 High Intensity Low-Voltage Extension Lights 1452 Mini-Powerpak Low-Voltage Extension Lights 1453 Fluorescent Hand Lamps — Explosionproof 1454 Tubular Fluorescent Inspection Light — Explosionproof 1455 Industrial Extension Lights — Explosionproof 1456 Low-Voltage, High Intensity Hand Lamp — Explosionproof 1457 HID Temp String-O-Lights 7000/6000/5000 Extension Lights Handy Compact Rough Service Fluorescent Work Battery Pack Industrial Extension Lights High Intensity Mini-Powerpak Hand Lamp Tubular Inspection Light Industrial Extension Lights 918 Low-Voltage, High Intensity Hand Lamp Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting Lighting Lighting Description Page McGill General Incandescent Utility Lights 1458 Fluorescent Utility Lights 1460 McGill Lamp Protection Protect-O-Sleeves 1461 Protect-O-Tubes 1463 Tubeloc Holders 1464 Protect-O-Globes 1465 Wire Lamp Guards and Wire Lamp Guard Grounding Kit 1466 Utility Lights Protect-O-Sleeves Protect-O-Tubes Tubeloc Holders Protect-O-Globes Wire Lamp Guard McGill Lamp Changers Fluorescent Lamp Changers 1467 Incandescent Lamp Changers 1468 Lamp Changer Accessories and Replacement Parts 1470 Lamp Changers Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 919 Mercmaster™ III Luminaires Family Tree Flexible Pendant Mount Pendant Mount KPA75 KPA100 Ceiling Mount 25° Stan KPC75 KPC100 KPCH75 KPCH100 K K Lighting: Enclosed and Gasketed — Area — HID Lighting KPAF75 KPAF100 Cone Pendant Mount POLYMERIC REFRACTORS NEMA 2 LPRF-2CP NEMA 3 LPRF-3CP NEMA 4 LPRF-4CP NEMA 5 LPRF-5CP MLBG SERIES 50 W-150 W HPS 50 W-175 W PSMH Med. Base 26-84 W Fluorescent 5.50"/ 139.7mm • Fluorescent • Metal Halide 100W Max. (Lamp Extender not required) Standard Dome CMR-4ST * Deep Dome CMR-4DD * 7.75"/ 196.9mm MLBR SERIES 50 W-150 W HPS 50 W-175 W PSMH Med. Base 26-84 W Fluorescent KPB SERIES 50 W-150 W HPS 100 W, 175 W, 200 W, 250 W PSMH (KPBG) Mogul Base 5.50"/ 139.7mm Metal Halide 100W Max Lamp Extender 30° Angle CMR-4AN GLASS REFRACTORS Standard Dome Deep Dome KR2-ST KR2-DD Standard Dome CMR-4ST * NEMA 1 LPG-R1 NEMA 3 LPG-R3 NEMA 5 LPG-R5 30° Angle KR2-AN POLYMERIC REFRACTORS NEMA 2 LPRF-2CP NEMA 3 LPRF-3CP NEMA 4 LPRF-4CP NEMA 5 LPRF-5CP KRG2 Refractor Guard GLASS GLOBE HID GLASS GLOBE Clear Amber Blue Green Red VPGL-1HR VPGL-1AM VPGL-1BL VPGL-1GR VPGL-1RE 5.63"/ 143.0mm GLASS GLOBE Clear VPGL-3HR Fluorescent Clear VPGL-2HR Amber VPGL-2AM Blue VPGL-2BL Green VPGL-2GR Red VPGL-2RE 8.00"/ 203.2mm KGU1 HID GlobeGuard 8.50"/ 215.9mm KGU2 Fluorescent Globe Guard (for 100 W HPS only) Standard Dome KR2-ST Deep Dome KR2-DD GLASS GLOBE 6.75"/171.5mm EXIT Clear Amber Blue Green Red 9.25"/ 235.0 mm VPGL-2HR VPGL-2AM VPGL-2BL VPGL-2GR VPGL-2RE KGU2 Globe Guard Three-Way Exit Sign CJEXRN 5.75"/146.1mm DIA. 30° Angle KR2-AN 5.69”/ 144.5mm * Standard and deep dome reflectors may interfere with bottom conduit entry if used with KPST and KPWB mounting hoods. 11.38"/ 289.1mm 920 6.63”/ 168.4mm 13.25"/336.6mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 KRG2 Refractor Guard Mercmaster™ III Luminaires Family Tree ing Mount 25° Stanchion Mount KPC75 KPC100 KPS125 KPS150 90° Stanchion Mount KPST125 KPST150 Wall Mount KPWB75 KPWB100 Lighting 0"/ 7mm KPBR SERIES 50 W-150 W HPS 100 W, 175 W, 200 W, 250 W PSMH Mogul Base 7.75"/ 196.9mm 7.75"/ 196.9mm Metal Halide 100W Max Lamp Extender Standard Dome CMR-4ST* Standard Dome Deep Dome CMR-4ST * CMR-4DD * 30° Angle CMR-4AN OLYMERIC FRACTORS MA 2 LPRF-2CP MA 3 LPRF-3CP MA 4 LPRF-4CP MA 5 LPRF-5CP GLASS GLOBE Clear VPGL-3HR (for 100 W HPS only) GLASS REFRACTORS NEMA 1 LPG-R1 NEMA 3 LPG-R3 NEMA 5 LPG-R5 GLASS REFRACTORS 30° Angle CMR-4AN VPGL-2HR VPGL-2AM VPGL-2BL VPGL-2GR VPGL-2RE NEMA 2 KPRF-400-2 NEMA 3 KPRF-400-5 Clear VPGL-4HR KPBG-12 12” Wire Guard KRG2 Refractor Guard KRG2 Refractor Guard 16” Lens Enclosed Reflector KPR-4HB GLASS GLOBE 30° Angle KR2-AN GLASS GLOBE Clear Amber Blue Green Red KPB400 SERIES 250 W-400 W HPS 250 W, 320 W, PSMH 350 W, 400 W PSMH Mogul Base GHB7000-NG 16” Wire Guard KPGU400 Globe Guard GU2 lobe Guard * Standard and deep dome reflectors may interfere with bottom conduit entry if used with KPST and KPWB mounting hoods. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 921 Lighting: Enclosed and Gasketed — Area — HID KPB SERIES 50 W-150 W HPS 100 W, 175 W, 200 W, 250 W PSMH (KPBG) Mogul Base Mercmaster™ III Low Profile Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Lighting: Enclosed and Gasketed — Area — HID Lighting Applications • Enclosed and gasketed fixtures suitable for use in: — Marine and wet locations — A wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by the National Electrical Code as Class I, Division 2; Class II, Division 1 and 2; and Class III — Areas of low clearance, low ceiling heights or where fixture weights must be minimized — For Zone 2, the method of protection is AEx nA nR – Restricted Breathing/Nonsparking or AEx nR – Restricted Breathing — Non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust, corrosive atmosphere or high ambient temperatures are encountered • Typical applications include: — Pulp and paper mills — Processing plants — Chemical plants — Oil refineries — Foundries — Manufacturing plants — Storage areas — Waste and sewage treatment — Parking garages — Other areas where dust, water, dirt and rough usage are a problem Features • Compact light weight low profile design is suited for low mounting heights in conjunction with lower wattage fixtures. • Modular design allows scores of fixture component combinations to meet installation and lighting needs. Uses same mounting hoods and optical accessories as Mercmaster III. • A choice of heat-resistant prismatic glass refractors (NEMA I, III or V) or heat-resistant globes which thread directly into ballast housing. Photometrics available upon request – contact your local sales representative. • Standard dome or 30° angle reflectors made of fiberglass reinforced white polyester. Highly resistant to corrosive atmospheres. • Accommodates medium base lamps. • A wide range of voltages available (120 to 600 Volt) and ballast types (Reactor, CWA, CWI and Super CWA). • Medium base lamp type and watts: — HPS 50 W-150 W — PSMH 50 W-175 W • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360º compression at all points on ballast housing gasket for positive sealing. Swing away design of captive bolt and nut simplifies servicing. • All Mercmaster III mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kits). • Fixtures are for use in Class I, Zone 2 hazardous locations. • The AEx nA nR / Ex nR (V) factory sealed Mercmaster III prevents vapors and gases from entering the globe chamber. There are no seals or putty required which will reduce installation time and installation errors. Low Profile Mercmaster III with Prismatic Globe and Guard Standard Materials • Mounting hoods, bodies and guard: cast copperfree (4/10 of 1% max.) aluminum • All hardware and catch assemblies: stainless steel • Reflectors: Fiberglass reinforced white polyester • Globes and Refractors: heat-resistant prismatic glass Standard Finishes • Mounting hoods, bodies and guards: baked gray epoxy-clad finish, electrostatically applied for complete uniform protection Options • Quartz Auxiliary comes to full brightness immediately and remains lit until the HID lamp attains 60-70% of full illumination. Quartz Auxiliary supplied with relay switch and socket to accept 120 V quartz double-contact bayonet base lamp (not included). Add suffix -E †. • Guards with gray epoxy painted to match fixtures, supplied with stainless steel screws. Add suffix -G before voltage suffix. • Hot Restrike to restrike HPS lamp immediately when power is restored after a momentary power interruption. Add suffix -R. • Smart Starter incorporates a 1-1/2 minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location, reducing maintenance and repair costs. Available for all fixtures. Add suffix -S. • Smart Hot Restrike will immediately restrike HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps. Add suffix -SR. • AEx nA nR fixtures, add suffix -Z2. • AEx nR fixtures, add suffix -ZB. • Ex nR fixtures, add suffix -Z V. • Reflectors are available as standard dome and 30° angle polyester. Order separately. † Fixtures equipped with quartz auxiliary lamp do not comply with NEC/CEC V requirements and are not suitable for use in classified locations. V CSA Certification Only. 922 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Certifications and Compliances * Fixtures Outside Type (Salt Water) Type 4X IP66 Related Products • Photocells for classified use are available, see PCD2 Series. Lighting • UL Listed: 60079-15 • UL Standard: 1598A, UL 844, Marine Type Electric Fixtures Outside Type (Salt Water) • CSA Certified: LR25428 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide Series: ML Mercmaster III Low Profile A L Lamp Type: I - Incandescent L - High Pressure Sodium H or P - Pulse Start Metal Halide H - 175 W Metal Halide (available with TT voltage only) V Mounting: A - Pendant (rigid mounting) C - Ceiling D - Pendant Cone Hood F - Pendant (flexible mounting) R - 90° Stanchion S - 25° Stanchion W - Wall 15 2 G1 Hub Size: 2 - 3/4” NPT 3 - 1” NPT 4 - 1-1/4” NPT stanchion 5 - 1-1/2” NPT stanchion Wattage: 10 - 100 W HPS, PSMH 15 - 150 W HPS, PSMH and 60-150 W max. Incandescent 17 - 175 W PSMH 17 - 175 W MH V 50 - 50 W HPS, PSMH 70 - 70 W HPS, PSMH G MT R Z2 Guard Options: G - Cast Guard N - No Guard Optical Assembly: ➋ G1 - Globe J1 - NEMA I Glass Refractor J3 - NEMA III Glass Refractor J5 - NEMA V Glass Refractor P2 - NEMA II Polymeric Refractor P3 - NEMA III Polymeric Refractor P4 - NEMA IV Polymeric Refractor P5 - NEMA V Polymeric Refractor Options: E - Emergency Quartz ➎ F - Fuse Kit (Specify Voltage) ➏ R - Hot Restrike ➌ S - Smart Starter ➍ SR - Smart Hot Restrike ➌ H1 - Photocontrol 120 V H2 - Photocontrol 208 V H3 - Photocontrol 240 V H4 - Photocontrol 277 V C - Safety Cable Adapted V D - E-27 Export Socket T - Terminal Blocks V V - Anti-Vibration Modifications V X - Appledapter ➐ Mounting Hood Adapter V Suffix: Voltage: ➊ LB - Incandescent, 120, Z2 - Zone 2 suffix 60 Hz (required for MT - 120/208/240/277, AEx nA nR 60 Hz rating) 5MT - 120/208/240/ ZB - Zone 2 suffix 277/480, 60 Hz (required for 48 - 480, 60 Hz AEx nR) 125 - 120, 50 Hz Z - Zone 2 suffix 225 - 225, 50 Hz 226 - 220, 60 Hz (required for 245 - 240, 50 Hz Ex nR) V C2 - 208, 60 Hz, CWI V C3 - 240, 60 Hz, CWI V C6 - 480, 60 Hz, CWI V C7 - 600, 60 Hz, CWI V TT - 120/277/347, 60 Hz, CWA V * Compliance data varies for specific fixtures. Consult Appleton regarding suitability of specific fixtures for a particular application. ➊ Other voltages, frequencies available – contact your local sales representative. Voltages shown are limited to specific combinations; refer to following pages. ➋ Polymeric Refractor suitable for Class II, Groups F and G, NEMA 4X and Marine Type Electric Fixtures Outside Type (Salt Water) only (100 W PSMH Max.). Reflectors ordered separately. ➌ Available for 50-150 W HPS fixtures only. ➍ Available for HPS or PSMH fixtures. ➎ Not suitable for hazardous location per NEC/CEC V. ➏ Canadian Electrical Code does NOT allow fusing in hazardous locations V. ➐ Appledapter is available for use with the pendant, ceiling and angled stanchion mounting only. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 923 Lighting: Enclosed and Gasketed — Area — HID ML Mercmaster™ III Low Profile Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Lighting: Enclosed and Gasketed — Area — HID Lighting Illustrated Features Vented Reflectors Reflectors are thick, tough fiberglass- reinforced white polyester, vented for cooler operation. Quickly attach with furnished stainless steel screws. High Temperature Sockets Medium base high-temperature porcelain sockets. Aluminum Inner Reflector Solid aluminum inner reflector (for refractor ballast housings only) improves photometric efficiency. Globe Chamber Completely sealed from the ballast housing and outside vapors/air (nR). Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. Photocell Available for all fixtures except cone and ceiling mount. Installs through knock-out in mounting hood. Provides continuous ON-OFF dusk-to-dawn control. Stainless Steel Inserts Ballast bodies have stainless steel threaded inserts to receive stainless steel screws for reflectors and guard. Prevents "freezing”, allowing guards and reflectors to be easily removed and replaced at any time, without damage to the housing. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Prismatic Glass Globes and Refractors Heat-resistant globes and refractors thread directly into ballast housing and seal against a high-temperature silicone rubber gasket. Ballast Assembly Utilizing non-sparking components avoiding the ignition of gases or vapors that may be present (nA). Mounting Hood and Globe Gaskets Silicone rubber gaskets seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. Terminal Blocks (Zone 2) A seven-point terminal block is provided to facilitate wiring. Terminal block accommodates wire size ranging from #8 to #24 AWG. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. V CSA Certification Only. 924 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaire Thermal Performance Class I, Division 2; Class II, Division 1; Simultaneous exposure to hazardous conditions in both classifications Temperature identification numbers of Mercmaster III Low Profile High Pressure Sodium and Pulse Start Metal Halide Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Lamp 50 70 HPS HPS HPS Class II, Division 1 Groups E, F and G Simultaneous Exposure Class I, Division 2 / Class II, Division 1 Supply Wire Temp. (°F/°C) Ambient Temp. (°F/°C) Globe Globe & Reflector Refractor Globe Globe & Reflector Refractor Globe Globe & Reflector 194/90 104/40 T3 T3 T3B T4A T4A T5 T3 T3 T3 194/90 131/55 T3 T3 T3A T4A T4A T4A T2D T2D T2D 194/90 149/65 T3 T3 T3A T4 T4 T4A T2C T2C T2C 194/90 104/40 T3 T3 T3 T4 T4 T5 T2B T2B T2D 194/90 131/55 T2D T2D T3 T3C T3C T4A T2B T2B T2C Class I, Division 2 Refractor 194/90 149/65 — — T3 — — T4 — — T2B 194/90 104/40 T2C T2C T2D T4 T4 T4A T2B T2B T2B 194/90 131/55 T2B T2B T2C T3C T3C T4 T2A T2A T2A 194/90 149/65 — — — — — — — — — 104/40 T2A T2A T2B T3A * — T4 325 — T2 150 HPS 194/90 194/90 104/40 T3 T3 T3A T4A T4A T6 T2D T2D T3 50 PSMH 194/90 131/55 T3 T3 T3 T4 T4 T5 T2C T2C T2D 70 PSMH 194/90 149/65 T3 T3 T3 T4 T4 T4A T2B T2B T2D 194/90 104/40 T3 T3 T3 T3C T3C T4A T2B T2B T2C 194/90 131/55 T2D T2D T3 T3C T3C T4A T2A T2A T2B 230/110 149/65 — — T3 — — T4 — — T2B 194/90 104/40 T2A T2A T2B T3B T3B T4A T2 T2 T2A 100 PSMH 194/90 131/55 T2A T2A T2B T3A * T3A * T4 T1 T1 T2 150 PSMH 230/110 104/40 350 350 325 — — T3B — — T1 175 PSMH 230/110 104/40 350 350 325 — — T3B — — T1 175 MH V 230/110 104/40 — — 325 — — T3B — — — 194/90 104/40 T3B T3B T3C — — — — — — 194/90 131/55 T3A T3A T3C — — — — — — 194/90 149/65 T3A T3A T3C — — — — — — 194/90 104/40 T3 T3 T3 — — — — — — 194/90 131/55 T3 T3 T3 — — — — — — 194/90 149/65 T2D T2D T3 — — — — — — 60 100 150 Inc. Inc. Inc. 194/90 104/40 T2D T2D T3 — — — — — — 194/90 131/55 T2B T2B T2D — — — — — — 194/90 149/65 T2B T2B T2D — — — — — — “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” # T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 * “T” numbers are for Groups E and F only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 925 Lighting: Enclosed and Gasketed — Area — HID 100 Type Fixtures Outside Type (Salt Water) Type 4X IP66 Lighting Watts Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Mercmaster™ III Low Profile Luminaire Thermal Performance Class I, Zone 2, AEx nA nR IIC, AEx nR IIC IP66, NEMA 4X Temperature identification numbers of Mercmaster III Zone 2 Low Profile High Pressure Sodium and Pulse Start Metal Halide. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Lighting Watts 50 HPS 70 Lighting: Enclosed and Gasketed — Area — HID Type HPS 100 HPS 150 HPS 50 PSMH 70 PSMH 100 PSMH Supply Wire Temp. (°F/°C) Ambient Temp. (°F/°C) 194/90 104/40 Fixtures Outside Type (Salt Water) Type 4X IP66 Class I, Zone 2 AEx nA nR IIC / Ex nR IIC Globe w/ Globe Reflector Refractor T6 T6 T6 Class I, Zone 2 AEx nR IIC Globe w/ Globe Reflector Refractor T6 T6 T6 194/90 131/55 T5 T5 T5 T5 T5 T5 194/90 149/65 T4 T4 T5 T4 T4 T5 194/90 104/40 T5 T5 T5 T5 T5 T5 194/90 131/55 T4 T4 T4 T4 T4 T4 194/90 149/65 — — T4 — — T4 194/90 104/40 T4 T4 T4 T4 T4 T4 194/90 131/55 T4 T4 T4 T4 T4 T4 194/90 104/40 T4 T4 T4 T4 T4 T4 194/90 104/40 T5 T5 T6 T5 T5 T6 194/90 131/55 T5 T5 T6 T5 T5 T6 194/90 149/65 T4 T4 T5 T4 T4 T5 194/90 104/40 T5 T5 T6 T5 T5 T6 194/90 131/55 T4 T4 T6 T4 T4 T6 230/110 149/65 — — T4 — — T4 194/90 104/40 T4 T4 T6 T4 T4 T6 194/90 131/55 T4 T4 T4 T4 T4 T4 150 PSMH 221/105 104/40 T3 T3 T4 T3 T3 T4 175 PSMH 221/105 104/40 T3 T3 T4 T3 T3 T4 175 MH V 230/110 104/40 — — T3 — — — “T” Numbers represent the maximum surface temperature for luminaries with AEx nA nR, Ex nR and AEx nR rating: The “T” number is established by separately determining the maximum temperature of the globe surface and ballast compartment. The hotter of the two is taken to determine the “T” number for the overall fixture. “T” Number T1 T2 T3 T4 T5 T6 Temp. Range (°F) 547-842 394-572 277-392 214-275 187-212 185 Temp. Range (°C) 301-450 201-300 136-200 101-135 86-100 85 V CSA Certification Only. 926 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaires 50 W – 150 W HPS High Power Factor (min. P.F. 90%). Medium base lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎➏ With Globe With Type V 8” Refractor ➋ Pendant — One Hub, Rigid Mounting HPS 70 HPS 100 HPS 150 3/4 MLAL502G1N 1 MLAL503G1N MLAL502J5N MLAL503J5N 3/4 MLAL702G1N MLAL702J5N 1 MLAL703G1N MLAL703J5N 3/4 MLAL102G1N MLAL102J5N 1 MLAL103G1N MLAL103J5N 3/4 MLAL152G1N ➐ MLAL152J5N ➐ 1 MLAL153G1N ➐ MLAL153J5N ➐ 3/4 MLDL502G1N MLDL502J5N 1 MLDL503G1N MLDL503J5N 3/4 MLDL702G1N MLDL702J5N Lighting: Enclosed and Gasketed — Area — HID Shown with Globe and Optional Guard 50 Lighting HPS Pendant Cone — One Hub, Rigid Mounting HPS HPS HPS Shown with Refractor HPS 50 70 100 150 1 MLDL703G1N MLDL703J5N 3/4 MLDL102G1N MLDL102J5N 1 MLDL103G1N MLDL103J5N 3/4 MLDL152G1N ➐ MLDL152J5N ➐ 1 MLDL153G1N ➐ MLDL153J5N ➐ 3/4 MLCL502G1N MLCL502J5N 1 MLCL503G1N MLCL503J5N 3/4 MLCL702G1N MLCL702J5N Ceiling — Five Hubs, Four Close-up Plugs HPS HPS HPS Shown with Globe HPS 50 70 100 150 1 MLCL703G1N MLCL703J5N 3/4 MLCL102G1N MLCL102J5N MLCL103G1N MLCL103J5N 3/4 MLCL152G1N ➐ MLCL152J5N ➐ 1 MLCL153G1N ➐ MLCL153J5N ➐ 1 ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ For fixtures with guards, substitute a G for the N before adding voltage suffix. See following pages for accessory ordering information. ➍ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts LB MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V Inc. 150 Max. X — — — — — — — — — — — — — HPS 50 — X — — — X X — X — — — — X HPS 70 — X — X X X X — X — — — — X HPS 100 — X — X X X X — X — — — — X HPS 150 — X — X X X X — X X X X X X PSMH 50 — X — X — — — — — — — — — X PSMH 70 — X — X X X — — X — — — — X PSMH 100 — X — X X X — — X — — — — X PSMH 150 — X — X — — — — X — — — — X PSMH 175 — X X X — — — — X — — — — X 175 — X — — — — — — — X X X X X MH V Voltages: LB - Incandescent, 120 V 60 Hz 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. ➐ For 150 W HPS fixtures, use S-55 lamp type only. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 927 Mercmaster™ III Low Profile Luminaires 50 W – 150 W HPS High Power Factor (min. P.F. 90%). Medium base lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lighting: Enclosed and Gasketed — Area — HID Lighting Lamp Type Wall — Five Hubs, Four Close-Up Plugs Shown with Refractor and Optional Guard Lamp Watts HPS 50 HPS 70 HPS 100 HPS 150 HPS 50 Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎➏ With Globe With Type V 8” Refractor ➋ 3/4 MLWL502G1N MLWL502J5N 1 MLWL503G1N MLWL503J5N 3/4 MLWL702G1N MLWL702J5N 1 MLWL703G1N MLWL703J5N 3/4 MLWL102G1N MLWL102J5N 1 MLWL103G1N MLWL103J5N 3/4 MLWL152G1N ➐ MLWL152J5N ➐ 1 MLWL153G1N ➐ MLWL153J5N ➐ 1-1/4 MLSL504G1N MLSL504J5N 1-1/2 MLSL505G1N MLSL505J5N 1-1/4 MLSL704G1N MLSL704J5N 25° Stanchion — One Hub HPS HPS Shown with Globe and Optional Guard 90° Stanchion — One Hub 100 HPS 150 HPS 50 HPS HPS Shown with Refractor and Optional Guard 70 HPS 70 100 150 1-1/2 MLSL705G1N MLSL705J5N 1-1/4 MLSL104G1N MLSL104J5N 1-1/2 MLSL105G1N MLSL105J5N 1-1/4 MLSL154G1N ➐ MLSL154J5N ➐ 1-1/2 MLSL155G1N ➐ MLSL155J5N ➐ 1-1/4 MLRL504G1N MLRL504J5N 1-1/2 MLRL505G1N MLRL505J5N 1-1/4 MLRL704G1N MLRL704J5N 1-1/2 MLRL705G1N MLRL705J5N 1-1/4 MLRL104G1N MLRL104J5N 1-1/2 MLRL105G1N MLRL105J5N 1-1/4 MLRL154G1N ➐ MLRL154J5N ➐ 1-1/2 MLRL155G1N ➐ MLRL155J5N ➐ ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ For fixtures with guards, substitute a G for the N before adding voltage suffix. See following pages for accessory ordering information. ➍ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts LB MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V Inc. 150 Max. X — — — — — — — — — — — — — HPS 50 — X — — — X X — X — — — — X HPS 70 — X — X X X X — X — — — — X HPS 100 — X — X X X X — X — — — — X HPS 150 — X — X X X X — X X X X X X PSMH 50 — X — X — — — — — — — — — X PSMH 70 — X — X X X — — X — — — — X PSMH 100 — X — X X X — — X — — — — X PSMH 150 — X — X — — — — X — — — — X PSMH 175 — X X X — — — — X — — — — X 175 — X — — — — — — — X X X X X MH V Voltages: LB - Incandescent, 120 V 60 Hz 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. ➐ For 150 W HPS fixtures, use S-55 lamp type only. V CSA Certification Only. 928 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaires 50 W - 175 W PSMH High Power Factor (min. P.F. 90%). Medium base lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎➏ With Globe With Type V 8” Refractor ➋ Pendant — One Hub, Rigid Mounting PSMH 70 PSMH 100 PSMH 150 PSMH 175 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 MLAH502G1N MLAH503G1N MLAH702G1N MLAH703G1N MLAH102G1N MLAH103G1N MLAP152G1N MLAP153G1N MLAP172G1N MLAP173G1N MLAH502J5N MLAH503J5N MLAH702J5N MLAH703J5N MLAH102J5N MLAH103J5N MLAP152J5N MLAP153J5N MLAP172J5N MLAP173J5N 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 MLDH502G1N MLDH503G1N MLDH702G1N MLDH703G1N MLDH102G1N MLDH103G1N MLDP152G1N MLDP153G1N MLDP172G1N MLDP173G1N MLDH502J5N MLDH503J5N MLDH702J5N MLDH703J5N MLDH102J5N MLDH103J5N MLDP152J5N MLDP153J5N MLDP172J5N MLDP173J5N 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 MLCH502G1N MLCH503G1N MLCH702G1N MLCH703G1N MLCH102G1N MLCH103G1N MLCP152G1N MLCP153G1N MLCP172G1N MLCP173G1N MLCH502J5N MLCH503J5N MLCH702J5N MLCH703J5N MLCH102J5N MLCH103J5N MLCP152J5N MLCP153J5N MLCP172J5N MLCP173J5N Lighting: Enclosed and Gasketed — Area — HID 50 Lighting Shown with Globe and Optional Guard PSMH Pendant Cone — One Hub, Rigid Mounting PSMH 50 PSMH 70 PSMH 100 PSMH 150 PSMH Shown with Refractor Ceiling — Five Hubs, Four Close-up Plugs 175 PSMH 50 PSMH 70 PSMH 100 PSMH 150 PSMH 175 Shown with Globe ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ For fixtures with guards, substitute a G for the N before adding voltage suffix. See following pages for accessory ordering information. ➍ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts LB MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V Inc. 150 Max. X — — — — — — — — — — — — — HPS 50 — X — — — X X — X — — — — X HPS 70 — X — X X X X — X — — — — X HPS 100 — X — X X X X — X — — — — X HPS 150 — X — X X X X — X X X X X X PSMH 50 — X — X — — — — — — — — — X PSMH 70 — X — X X X — — X — — — — X PSMH 100 — X — X X X — — X — — — — X PSMH 150 — X — X — — — — X — — — — X PSMH 175 — X X X — — — — X — — — — X 175 — X — — — — — — — X X X X X MH V Voltages: LB - Incandescent, 120 V 60 Hz 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. ➐ For 150 W HPS fixtures, use S-55 lamp type only. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 929 Mercmaster™ III Low Profile Luminaires 50 W - 175 W PSMH High Power Factor (min. P.F. 90%). Medium base lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎➏ With Globe With Type V 8” Refractor ➋ Lighting: Enclosed and Gasketed — Area — HID Lighting Wall — Five Hubs, Four Close-Up Plugs Shown with Refractor and Optional Guard PSMH 50 PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 50 PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 50 PSMH 70 PSMH 100 PSMH 150 PSMH 175 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 MLWH502G1N MLWH503G1N MLWH702G1N MLWH703G1N MLWH102G1N MLWH103G1N MLWP152G1N MLWP153G1N MLWP172G1N MLWP173G1N MLWH502J5N MLWH503J5N MLWH702J5N MLWH703J5N MLWH102J5N MLWH103J5N MLWP152J5N MLWP153J5N MLWP172J5N MLWP173J5N 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 MLSH504G1N MLSH505G1N MLSH704G1N MLSH705G1N MLSH104G1N MLSH105G1N MLSP154G1N MLSP155G1N MLSP174G1N MLSP175G1N MLSH504J5N MLSH505J5N MLSH704J5N MLSH705J5N MLSH104J5N MLSH105J5N MLSP154J5N MLSP155J5N MLSP174J5N MLSP175J5N 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 MLRH504G1N MLRH505G1N MLRH704G1N MLRH705G1N MLRH104G1N MLRH105G1N MLRP154G1N MLRP155G1N MLRP174G1N MLRP175G1N MLRH504J5N MLRH505J5N MLRH704J5N MLRH705J5N MLRH104J5N MLRH105J5N MLRP154J5N MLRP155J5N MLRP174J5N MLRP175J5N 25° Stanchion — One Hub Shown with Globe and Optional Guard 90° Stanchion — One Hub Shown with Refractor and Optional Guard ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ For fixtures with guards, substitute a G for the N before adding voltage suffix. See following pages for accessory ordering information. ➍ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts LB MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V Inc. 150 Max. X — — — — — — — — — — — — — HPS 50 — X — — — X X — X — — — — X HPS 70 — X — X X X X — X — — — — X HPS 100 — X — X X X X — X — — — — X HPS 150 — X — X X X X — X X X X X X PSMH 50 — X — X — — — — — — — — — X PSMH 70 — X — X X X — — X — — — — X PSMH 100 — X — X X X — — X — — — — X PSMH 150 — X — X — — — — X — — — — X PSMH 175 — X X X — — — — X — — — — X 175 — X — — — — — — — X X X X X MH V Voltages: LB - Incandescent, 120 V 60 Hz 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. ➐ For 150 W HPS fixtures, use S-55 lamp type only. V CSA Certification Only. 930 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaire Mounting Hoods High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Mounting Hoods Description Hub Size (Inches) Catalog Number One Hub, Rigid Mounting 3/4 KPA-75 1 KPA-100 3/4 KPAF-75 1 KPAF-100 3/4 KPCH-75 1 KPCH-100 Lighting Pendant Pendant — Flexible One Hub, Flexible Mounting One Hub, Rigid or Flexible Mounting Ceiling Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 3/4 KPWB-75 1 KPWB-100 Wall Five Hubs, Four Close-Up Plugs 25° Stanchion One Hub 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 90° Stanchion One Hub Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 931 Lighting: Enclosed and Gasketed — Area — HID Pendant Cone Mercmaster™ III Low Profile Luminaire Ballast Bodies High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Lighting Ballast Bodies Ballast Body for Glass Refractor Ballast Body for Glass Globe or Polymeric Refractor Lighting: Enclosed and Gasketed — Area — HID High Pressure Sodium High Power Factor (Min. P.F. 90%) Lamp Type Inc. Lamp Watts Pulse Start Metal Halide Super Constant Wattage Autotransformer (Min. P.F. 90%) Catalog Number ➍➎ For Globe 150 Max. MLBG15I For Refractor Voltage Suffixes LB MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V MLBR15I X — — — — — — — — — — — — — HPS 50 MLBG50L ➊➋ MLBR50L ➊➋ — X — — — X X — X — — — — X HPS 70 MLBG70L ➊➋ MLBR70L ➊➋ — X — X X X X — X — — — — X HPS 100 MLBG10L ➊➋ MLBR10L ➊➋ — X — X X X X — X — — — — X HPS 150 MLBG15L ➊➋ MLBR15L ➊➋ — X — X X X X — X X X X X X PSMH 50 MLBG50H ➋➌ MLBR50H ➋➌ — X — X — — — — — — — — — X PSMH 70 MLBG70H ➋➌ MLBR70H ➋➌ — X — X X X — — X — — — — X PSMH 100 MLBG10H ➋➌ MLBR10H ➋➌ — X — X X X — — X — — — — X PSMH 150 MLBG15P ➋➌ MLBR15P ➋➌ — X — X — — — — X — — — — X PSMH 175 MLBG17P ➋➌ MLBR17P ➋➌ — X X X — — — — X — — — — X MH V 175 MLBG17H ➋ — X — — — — — — — X X X X X Voltages: LB - Incandescent, 120 V 60 Hz MT - 120/208/240/277 V 60 Hz 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz 125 - 120 V 50 Hz 225 - 225 V 50 Hz 226 - 220 V 60 Hz MLBR17H ➋ 235 - 230 V 50 Hz 245 - 240 V 50 Hz C2 - 208 V 60 Hz, CWI V C3 - 240 V 60 Hz, CWI V C6 - 480 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, TT - 120/277/347 V 60 Hz, CWA V ➊ After voltage suffix add: -S for Smart Starter, -SR for Smart Hot Restrike, -R for ballast body with Hot Restrike Ignitor. ➋ Add -E after voltage suffix for ballast body with provision for Quartz Emergency Light. Not suitable for hazardous locations. ➌ After voltage suffix add: -S for Smart Starter. ➍ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➎ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification Only. 932 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaire Accessories and Replacement Parts High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Description Catalog Number Prismatic Glass Globes — Heat-Resistant VPGL-1HR VPGL-1AM Blue VPGL-1BL Green VPGL-1GR Red VPGL-1RE IES/NEMA Distribution Curves Catalog Number Glass Globe Light Distribution Closed Prismatic Glass Refractors — All Heat-Resistant LPG-R1 NEMA Type III LPG-R3 NEMA Type V LPG-R5 Closed Prismatic Polymeric Refractors — For Use with PSMH Lamps 100 W max. 104 °F/40 °C max. ambient temperature. Suitable for Class II, Division 1 and 2, Groups F, G; NEMA 4X, UL 1598A Marine Type Electric Fixtures Outside Type (Salt Water) Polymeric Refractor NEMA Type II LPRF-2CP NEMA Type III LPRF-3CP NEMA Type IV LPRF-4CP NEMA Type V LPRF-5CP Description Catalog Number White Polyester Reflectors — Furnished with stainless steel screws For Globe Fixtures For Glass Refractor Fixtures Standard Dome Guards 30° Angle Standard Dome KR2-ST Deep Dome KR2-DD ➊ 30° Angle KR2-AN Standard Dome CMR-4ST ➋ Deep Dome CMR-4DD ➊ 30° Angle CMR-4AN Globe Guard Refractor Guard KGU1 KRG2 Globe Gasket Refractor Gasket VPGL-GK KRF-GK Globe Guard Refractor Guard Replacement Globe Gaskets — Silicone Rubber Globe Gaskets ➊ Dark Skies Compliant. ➋ Standard and deep dome reflectors may interfere with bottom conduit entry if used with KPST and KPWB mounting hoods. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 933 Lighting: Enclosed and Gasketed — Area — HID Glass Refractor NEMA Type I Lighting Clear Amber Mercmaster™ III Low Profile Luminaire Electrical Specifications and Fuse Kits High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Lighting: Enclosed and Gasketed — Area — HID Lighting Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Electrical Specifications Line Type of Starting Voltage Ballast ➊ Amps 50 Watt High Pressure Sodium 120 HX-HPF 0.58 208 HX-HPF 0.35 240 HX-HPF 0.31 277 HX-HPF 0.25 HX-HPF 0.26 347 V 70 Watt High Pressure Sodium 120 HX-HPF 0.90 208 HX-HPF 0.50 240 HX-HPF 0.44 277 HX-HPF 0.35 HX-HPF 0.30 347 V 480 HX-HPF 0.21 100 Watt High Pressure Sodium 120 HX-HPF 1.30 208 HX-HPF 0.76 240 HX-HPF 0.66 277 HX-HPF 0.60 HX-HPF 0.45 347 V 480 HX-HPF 0.33 480 C.W.I. 0.17 600 C.W.I. 0.14 150 Watt High Pressure Sodium ➋ 120 HX-HPF 2.00 208 HX-HPF 1.15 240 HX-HPF 1.00 277 HX-HPF 0.85 HX-HPF 0.52 347 V 480 HX-HPF 0.50 480 C.W.I. 0.25 600 C.W.I. 0.19 50 Watt Pulse Start Metal Halide 120 HX-HPF 0.87 208 HX-HPF 0.51 240 HX-HPF 0.47 277 HX-HPF 0.32 HX-HPF 0.15 347 V 70 Watt Pulse Start Metal Halide 120 HX-HPF 0.80 208 HX-HPF 0.50 240 HX-HPF 0.43 277 HX-HPF 0.39 HX-HPF 0.20 347 V 480 HX-HPF 0.26 100 Watt Pulse Start Metal Halide 120 HX-HPF 1.20 208 HX-HPF 0.70 240 HX-HPF 0.61 277 HX-HPF 0.55 HX-HPF 0.40 347 V 480 HX-HPF 0.30 Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Electrical Specifications Line Type of Starting Voltage Ballast ➊ Amps 150 Watt Pulse Start Metal Halide 120 HX-HPF 1.75 208 HX-HPF 1.30 240 HX-HPF 0.85 277 HX-HPF 0.77 Super C.W.A. 0.65 347 V 480 Super C.W.A. 0.45 175 Watt Pulse Start Metal Halide 120 Super C.W.A. 0.90 208 Super C.W.A. 0.50 240 Super C.W.A. 0.35 277 Super C.W.A. 0.30 Super C.W.A. 0.25 347 V 480 Super C.W.A. 0.25 175 Watt Metal Halide V 120 C.W.A. 1.30 208 C.W.A. 0.75 240 C.W.A. 0.65 277 C.W.A. 0.55 347 C.W.A. 0.50 480 C.W.I. 0.20 600 C.W.I. 0.16 Fuse Kit for Field Installation Operating Amps Total Watts 0.58 0.33 0.29 0.25 0.21 64 64 64 64 68 0.82 0.48 0.41 0.36 0.30 0.21 94 94 94 94 94 94 1.15 0.67 0.60 0.52 0.39 0.31 0.30 0.24 130 130 130 130 130 135 130 130 1.70 0.95 0.85 0.72 0.56 0.47 0.42 0.35 188 188 188 188 188 189 190 190 Lamp Watts 0.62 0.40 0.35 0.32 0.20 67 67 67 67 67 70W 0.85 0.52 0.44 0.39 0.28 0.23 95 95 95 95 88 95 1.15 0.70 0.58 0.50 0.40 0.35 130 130 130 130 129 140 50W 100W 150W 175W Volts 120 208 240 277 347 V 120 208 240 277 347 V 480 120 208 240 277 347 V 480 120 208 240 277 347 V 480 120 208 240 277 347 V 480 Fuse Quantity Required 1 2 2 1 1 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 Operating Amps Total Watts 1.60 1.00 0.80 0.70 0.55 0.42 188 188 188 188 185 185 1.78 1.08 0.89 0.76 0.65 0.50 199 199 199 199 208 213 1.80 1.04 0.90 0.80 0.65 0.45 0.37 210 210 210 210 210 215 215 Fuse Kit Catalog Number HPS PSMH F5 F3 F3 F3 F3 F2 F2 F2 F1 F1 F5 F4 F3 F3 F3 F3 F2 F2 F1 F2 F2 F1 F8 F6 F5 F4 F5 F3 F3 F3 F1 F2 F3 F2 F10 F10 F5 F5 F5 F5 F5 F4 F2 F2 F3 F3 — F5 — F3 — F3 — F2 F2 F2 — F2 ➊ C.W.A. – Constant Wattage Autotransformer. HX-HPF – High Reactance High Power Factor Autotransformer. Super C.W.A. – Super Constant Wattage Autotransformer. ➋ 150 W HPS units equipped with ballasts to operate 55 V lamps only. V CSA Certification Only. 934 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaire Dimensions and Weights High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Pendant (Rigid or Flex) 12.06”/306.0 mm Pendant Cone 1.17”/ 30.0 mm Ceiling 12.06”/306.0 mm 25º Stanchion 13.62”/346.0 mm 1.75”/ 45.0 mm 12.06”/306.0 mm 2.00”/ 51.0 mm 15.28”/ 388.0 mm Lighting 5.59”/ 142.0 mm 9.25”/ 235.0 mm 12.05”/ 306.0 mm Wall Mount 17.01”/ 432.0 mm 10.94”/ 278.0 mm 90º Stanchion 3.38”/ 85.8 mm 17.23”/438.0 mm (4) Mounting Holes 0.31”/8.0 mm 7.60”/ 193.0 mm 9.79”/249.0 mm 12.05”/ 306.0 mm 12.06”/306.0 mm Globe or Polymeric Refractor Ballast Housing 8" Glass Refractor Ballast Housing Standard Polyester Reflector 30º Angle Polyester Reflector Globe, Guard and Refractors Refractor Body, Refractor and Guard Polymeric Refractor Deep Dome Mercmaster III Low Profile Ballast and Accessory Weights ➊ Globe Housing Ballast (Wt. Lbs/Kg) Refractor Housing Ballast (Wt. Lbs/Kg) Watts HPS PSMH HPS PSMH Mounting Hoods Wt. Lbs/Kg Refractors, Globes, Guards and Reflectors Wt. Lbs/Kg 50 7.25/3.3 7.00/3.2 7.75/3.5 7.50/3.4 Pendant 2.25/1.0 8” Glass Refractor 5.25/2.4 70 8.25/3.7 7.75/3.5 8.75/4.0 8.25/3.7 Pendant Cone 2.50/1.1 Glass Globe 3.75/1.7 100 9.75/4.4 9.25/4.2 10.25/4.6 9.75/4.4 Ceiling 3.00/1.4 Refractor Guard 1.00/0.5 150 10.75/4.9 10.75/4.9 11.25/5.1 11.25/5.1 Wall 4.00/1.8 Globe Guard 1.00/0.5 175 — 11.00/5.0 — 11.50/5.2 25° Stanchion 3.25/1.5 Standard Dome 2.50/1.1 90° Stanchion 3.75/1.7 Deep Dome 5.00/2.3 30° Angle 2.50/1.1 Polymeric Refractor 2.43/1.1 ➊ Weights are approximate. Add 0.25 lbs/0.1 kg for Quartz option. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 935 Lighting: Enclosed and Gasketed — Area — HID 4.06”/ 103.0 mm PCD2 Series Factory Sealed Hazardous Location Photocontrol For use in Class I, Division 2, Groups A, B, C, D locations Maintains Class I, Division 2 rating for Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires, Mercmaster LED Class I, Division 2, Groups A, B, C, D NEMA 4X Lighting Applications Materials • Encapsulated photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. • Typical applications include walkways, security areas and any other outdoor lighting application. • For use with Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires. • For remote mounting in FS Boxes. • Encapsulated with epoxy sealing compound • FS: aluminum Certifications and Compliances • UL Standard: 1604 – Hazardous (Classified) Locations • cULus Recognized Lighting: Enclosed and Gasketed — Area — HID Features • Factory sealed design eliminates the need for an explosionproof enclosure. • Can be easily installed in the field. • Solid state design for performance and reliability. • Available for 120, 208, 240, or 277 volts. • 50-400 W HID, incandescent or fluorescent, 50/60 Hz. • 1000 V.A. Voltage/Ampere • Minimum time delay: 15 seconds to eliminate nuisiance tripping. • Provided with (3) 18AWG stranded leads 6”/152.4mm in length. • Will fit through standard 1/2” knockout. Factory-Installed Photocontrol Dimensions Add to fixture catalog after voltage; i.e.: KPWBL1075MTH1. Mercmaster III wall mounting hood with photocontrol installed shown Voltage Range Suffix Designation 120 V, 50/60 Hz H1 208 V, 50/60 Hz H2 240 V, 50/60 Hz H3 277 V, 50/60 Hz H4 1.13” 28.7 mm 1.13” 28.7 mm Photocontrol in FS Cover for Use with FS/FD Box Supplied with two stainless steel screws. For neoprene gasket, order catalog number FS-GKR-1N. Voltage Range Catalog Number 120V, 50/60 Hz FSKA-PC120D2 208-277V, 50/60 Hz FSKA-PC247D2 1.375” 34.9 mm 1.375” 34.9 mm 2.56” 65.0 mm 2.56” 65.0 mm 1.13” 28.7 mm Photocontrol for Field Installation Max. Current Catalog Number 120 V, 50/60 Hz Voltage Range 8.3 Amp PC120D2 208-277 V, 50/60 Hz 3.5 Amp 34.9 mm PC247D2 2.56” 65.0 mm 936 1.375” 0.69” 17.5 mm 1.19” 30.2 mm 1.94” 49.2 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaire Photometric Data 150 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 150-watt clear High Pressure Sodium lamp (16,000 lumen). Zone Lumens For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 100 W (9,500 lumen) HPS lamp – 0.594; for a 70 W (6,400 lumen) HPS lamp – 0.40; for a 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by – 0.95. Total Luminaire Efficiency = 83% REPORT NUMBER: ML15LG Lamps: 150 W High Pressure Sodium with Globe only * CIE Type – Semi-Direct 28.58 10-20 123.97 20-30 304.16 30-40 513.64 0-180 3.9 Coefficients of Utilization – Zonal Cavity Method 40-50 889.19 90-270 3.9 Effective Floor Cavity Reflectance 0.20 50-60 1299.53 Diagonal 3.7 60-70 1506.73 70-80 1706.16 80-90 1800.53 Lumens % Lamp % Fixture 1 77 71 66 61 72 66 61 57 57 53 49 48 45 42 40 37 35 31 90-100 1791.58 0-30 4563.72 2.9 3.4 2 68 59 51 45 63 55 48 42 46 41 36 39 34 31 32 28 25 21 100-110 1652.69 0-40 970.35 6.1 7.3 3 61 50 42 35 56 46 39 33 39 33 28 32 27 23 26 22 19 16 110-120 1311.22 0-60 3159.07 19.7 23.8 4 55 43 35 28 50 40 32 26 34 27 22 28 23 18 22 18 15 12 120-130 351.25 0-90 8172.49 51.1 61.5 5 50 38 29 23 46 35 27 21 29 23 18 24 19 15 19 15 12 9 130-140 5.14 90-120 4755.49 29.7 35.8 6 46 33 25 19 42 31 23 18 26 20 15 21 16 12 17 13 10 7 140-150 0.00 90-130 5106.74 31.9 38.4 7 42 30 22 16 38 27 20 15 23 17 13 19 14 10 15 11 8 6 150-160 0.00 90-150 5111.87 31.9 38.4 8 39 27 19 14 36 25 18 13 21 15 11 17 12 9 14 10 7 5 160-170 0.00 90-180 5111.87 31.9 38.5 9 36 24 17 12 33 22 16 11 19 13 9 16 11 8 13 9 6 4 170-180 0.00 0-180 13284.37 83.0 100.0 10 33 22 15 11 31 20 14 10 17 12 8 15 10 7 12 8 5 4 Lumens % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone 0 91 91 91 91 85 85 85 85 75 75 75 65 65 65 55 55 55 51 Total Luminaire Efficiency = 73.2% REPORT NUMBER: ML15LST Lamps: 150 W High Pressure Sodium with Standard Dome Reflector * CIE Type – Direct 0-10 219.96 10-20 683.41 20-30 1267.92 30-40 1613.68 0-180 1.64 Coefficients of Utilization – Zonal Cavity Method 40-50 1967.79 90-270 1.64 Effective Floor Cavity Reflectance 0.20 50-60 2333.86 Diagonal 1.88 60-70 2328.33 70-80 1118.52 80-90 174.91 Spacing Criteria Plane % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone 0 87 87 87 87 85 85 85 85 81 81 81 78 78 78 75 75 75 73 Lumens % Lamp % Fixture 1 79 75 71 68 77 73 70 67 70 67 65 67 65 63 64 62 61 59 90-100 1.23 0-30 2171.29 13.6 18.5 2 70 63 58 53 68 62 57 52 59 55 51 57 53 50 55 52 49 47 100-110 0.00 0-40 3784.97 23.7 32.3 3 63 54 48 42 61 53 47 42 51 46 41 49 44 40 47 43 40 38 110-120 0.00 0-60 8086.62 50.5 69.1 4 57 47 40 35 55 46 39 34 44 38 34 42 37 33 41 36 33 31 120-130 0.00 0-90 11708.37 73.2 100.0 5 52 41 34 29 50 41 34 29 39 33 28 37 32 28 36 31 28 26 130-140 0.00 90-120 1.23 0.0 0.0 6 48 37 30 24 46 36 29 24 35 29 24 33 28 24 32 27 24 22 140-150 0.00 90-130 1.23 0.0 0.0 7 44 33 26 21 42 32 26 21 31 25 21 30 25 21 29 24 20 19 150-160 0.00 90-150 1.23 0.0 0.0 8 41 30 23 18 39 29 23 18 28 22 18 27 22 18 26 22 18 16 160-170 0.00 90-180 1.23 0.0 0.0 9 38 27 21 16 37 27 20 16 26 20 16 25 20 16 24 19 16 14 170-180 0.00 0-180 11709.6 73.2 100.0 10 35 25 19 15 34 24 18 14 24 18 14 23 18 14 22 18 14 13 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 937 Lighting: Enclosed and Gasketed — Area — HID Zone Spacing Criteria Plane Lighting 0-10 Mercmaster™ III Low Profile Luminaire Photometric Data 150 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 150-watt clear High Pressure Sodium lamp (16,000 lumen). Lighting: Enclosed and Gasketed — Area — HID Lighting Zone Lumens For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 100 W (9,500 lumen) HPS lamp – 0.594; for a 70 W (6,400 lumen) HPS lamp – 0.40; for a 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by – 0.95. Total Luminaire Efficiency = 68.4% REPORT NUMBER: ML15LAN Lamps: 150 W High Pressure Sodium with 30° Angle Dome Reflector * CIE Type – Direct 0-10 168.01 10-20 536.92 20-30 972.38 30-40 1342.99 0-180 2.3 40-50 1625.08 90-270 2.0 50-60 1721.88 Diagonal 1.8 60-70 1586.98 70-80 1369.71 80-90 995.76 Lumens % Lamp % Fixture 1 70 66 62 58 68 64 60 57 60 57 54 57 54 52 54 52 50 48 90-100 461.94 0-30 1677.30 10.5 15.3 2 63 56 50 45 60 54 49 44 51 46 42 48 44 41 45 42 39 37 100-110 127.24 0-40 3020.29 18.9 27.6 3 56 48 41 36 54 46 40 35 44 38 34 41 37 33 39 35 32 30 110-120 27.54 0-60 6367.25 39.8 58.2 4 51 42 35 29 49 40 34 29 38 32 28 36 31 27 34 30 26 24 120-130 4.31 0-90 10319.70 64.5 94.3 5 47 37 30 24 45 36 29 24 34 28 23 32 27 23 30 26 22 20 130-140 2.68 90-120 616.71 3.9 5.6 6 43 33 26 21 41 32 25 20 30 24 20 28 23 19 27 22 19 17 140-150 0.00 90-130 621.02 3.9 5.7 7 39 29 23 18 38 28 22 18 27 21 17 26 21 17 24 20 16 15 150-160 0.00 90-150 623.70 3.9 5.7 8 37 26 20 16 35 26 20 15 24 19 15 23 18 15 22 18 14 13 160-170 0.00 90-180 623.70 3.9 5.7 9 34 24 18 14 33 23 18 14 22 17 13 21 17 13 20 16 13 11 170-180 0.00 0-180 10943.41 68.4 100.0 10 32 22 16 12 31 22 16 12 21 15 12 20 15 12 19 15 11 10 Zone Lumens Spacing Criteria Plane Coefficients of Utilization – Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone 0 80 80 80 80 78 78 78 78 74 74 74 70 70 70 66 66 66 64 Total Luminaire Efficiency = 77.6% REPORT NUMBER: ML15LJ5 Lamps: 150 W High Pressure Sodium with 8” Prismatic Glass Refracter – NEMA Type V * CIE Type – Semi-Direct 0-10 16.51 10-20 135.03 20-30 274.24 30-40 463.44 0-180 2.22 40-50 1125.38 90-270 2.20 50-60 1688.89 Diagonal 3.50 60-70 3137.76 70-80 2421.27 80-90 1145.98 90-100 411.16 0-30 425.77 2.7 3.4 2 66 56 49 42 62 54 47 41 49 43 38 44 39 35 40 36 32 29 100-110 632.32 0-40 889.22 5.6 7.2 3 58 46 38 31 54 44 36 30 40 33 27 36 30 25 32 27 23 21 110-120 448.30 0-60 3703.50 23.1 29.8 4 51 39 30 23 48 37 29 22 33 26 21 30 24 19 27 22 17 15 120-130 293.08 0-90 10408.50 65.1 83.8 5 46 34 25 18 43 32 24 18 29 22 16 26 20 15 23 18 13 11 130-140 154.61 90-120 1491.78 9.3 12.0 6 42 29 21 15 40 28 20 14 25 18 13 22 16 12 20 15 11 8 140-150 59.30 90-130 1784.86 11.2 14.4 7 39 26 18 12 36 25 17 12 22 15 11 20 14 10 18 13 9 7 150-160 9.99 90-150 1998.77 12.5 14.4 8 36 23 15 10 33 22 15 10 20 13 9 18 12 8 16 11 7 5 160-170 0.49 90-180 2009.26 12.6 16.2 9 33 21 14 9 31 20 13 8 18 12 8 16 11 7 15 10 6 4 170-180 0.00 0-180 12417.76 77.6 100.0 10 31 19 12 8 29 18 12 7 17 11 7 15 10 6 13 5 4 938 Spacing Criteria Plane Coefficients of Utilization – Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone 0 89 89 89 89 86 86 86 86 79 79 79 73 73 73 68 68 68 65 Lumens % Lamp % Fixture 1 76 70 65 60 72 67 62 58 61 57 54 56 53 50 51 48 46 43 9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Luminaire Photometric Data 100 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 100-watt clear Pulse Start Metal Halide lamp (8,500 lumen). Zone Lumens For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 50 W (3400 lumen) PSMH lamp – 0.40; for a 70 W (5600 lumen) PSMH lamp – 0.66; for a 150 W (10,500 lumen) PSMH lamp – 1.24; for a 175 W (17,500 lumen) PSMH lamp – 2.06. For candlepower values of fixture with guard, multiply by – 0.95. Total Luminaire Efficiency = 85.7% REPORT NUMBER: ML10HG Lamps: 100 W Pulse Start Metal Halide with Globe only * CIE Type – Semi-Direct 93.55 20-30 201.68 30-40 291.92 0-180 3.20 40-50 523.42 90-270 3.20 50-60 637.38 Diagonal 3.08 60-70 732.34 70-80 845.58 80-90 874.42 90-100 870.80 Spacing Criteria Plane Coefficients of Utilization – Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Zonal Lumen Summary 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 95 95 95 95 89 89 89 89 78 78 78 68 68 68 58 58 58 54 Lumens % Lamp % Fixture 1 81 74 69 64 75 69 64 60 60 56 52 51 48 45 43 40 38 34 0-30 316.42 4.1 4.7 2 71 62 54 48 66 57 50 45 49 43 39 41 37 33 34 31 28 24 100-110 809.33 0-40 608.33 7.8 9.1 3 64 52 44 37 59 49 41 35 41 35 30 35 30 26 29 25 21 18 110-120 643.44 0-60 1769.13 22.7 26.5 4 57 45 37 30 53 42 34 28 36 29 24 30 25 20 25 20 17 14 120-130 139.00 0-90 4221.46 54.1 63.2 5 52 40 31 25 48 37 29 23 31 25 20 26 21 17 21 17 14 11 130-140 0.71 90-120 2323.56 29.8 34.8 6 48 35 27 21 44 33 25 19 28 21 17 23 18 14 19 15 11 9 140-150 0.00 90-130 2462.56 31.6 36.8 7 44 31 23 17 40 29 22 16 25 19 14 21 16 12 17 13 10 7 150-160 0.00 90-150 2463.27 31.6 36.8 8 41 28 20 15 37 26 19 14 22 16 12 19 14 10 16 11 8 6 160-170 0.00 90-180 2463.27 31.6 36.8 9 38 26 18 13 35 24 17 12 20 15 11 17 12 9 14 10 7 5 170-180 0.00 0-180 85.7 100.0 Zone Zone 80 6684.73 Lumens Total Luminaire Efficiency = 75.8% CIE Type – Direct 10 35 23 16 12 32 22 15 11 19 13 9 16 11 8 13 9 6 5 REPORT NUMBER: ML10HST Lamps: 100 W Pulse Start Metal Halide with Standard Dome Reflector * 0-10 116.29 10-20 371.61 20-30 692.88 30-40 821.73 0-180 1.70 40-50 1064.03 90-270 1.70 50-60 1154.58 Diagonal 1.84 60-70 1134.19 70-80 470.22 80-90 83.66 Lumens % Lamp % Fixture 1 82 78 74 71 80 76 73 70 73 70 68 70 68 66 67 65 64 62 90-100 0.82 0-30 1180.78 15.1 20.0 2 73 66 61 56 71 65 60 55 62 58 54 60 56 53 57 54 51 50 100-110 0.00 0-40 2002.50 25.7 33.9 3 66 57 50 45 64 56 50 45 54 48 44 51 47 43 49 46 42 40 110-120 0.00 0-60 4221.11 54.1 71.4 4 60 50 43 37 58 49 42 37 47 41 36 45 40 36 43 39 35 33 120-130 0.00 0-90 5909.17 75.8 100.0 5 54 44 36 31 53 43 36 31 41 35 30 40 34 30 38 33 30 28 130-140 0.00 90-120 0.82 0.0 0.0 6 50 39 32 26 48 38 31 26 37 31 26 35 30 26 34 29 25 24 140-150 0.00 90-130 0.82 0.0 0.0 7 46 35 28 23 45 34 27 23 33 27 22 32 26 22 31 26 22 20 150-160 0.00 90-150 0.82 0.0 0.0 8 43 32 25 20 41 31 24 20 30 24 20 29 24 20 28 23 19 18 160-170 0.00 90-180 0.82 0.0 0.0 9 40 29 22 18 38 28 22 18 27 22 17 27 21 17 36 21 17 16 170-180 0.00 0-180 5910.00 75.8 100.0 10 37 26 20 16 36 26 20 16 25 20 16 24 19 16 24 19 15 14 Spacing Criteria Plane Coefficients of Utilization – Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 90 90 90 90 88 88 88 88 84 84 84 81 81 81 77 77 77 76 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 939 Lighting: Enclosed and Gasketed — Area — HID 21.19 10-20 Lighting 0-10 Mercmaster™ III Low Profile Luminaire Photometric Data 100 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 100-watt clear Pulse Start Metal Halide lamp (8,500 lumen). Lighting: Enclosed and Gasketed — Area — HID Lighting Zone Lumens For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 50 W (3400 lumen) PSMH lamp – 0.40; for a 70 W (5600 lumen) PSMH lamp – 0.66; for a 150 W (10,500 lumen) PSMH lamp – 1.24; for a 175 W (17,500 lumen) PSMH lamp – 2.06. For candlepower values of fixture with guard, multiply by – 0.95. Total Luminaire Efficiency = 71.3% REPORT NUMBER: ML10HAN Lamps: 100 W Pulse Start Metal Halide with 30° Angle Dome Reflector * CIE Type – Direct 0-10 91.83 10-20 301.65 20-30 543.23 30-40 703.02 0-180 2.08 40-50 877.11 90-270 2.06 50-60 850.33 Diagonal 1.76 60-70 7753.51 70-80 667.27 80-90 471.44 Lumens % Lamp % Fixture 1 74 69 65 62 71 67 64 60 63 60 58 60 57 55 57 55 53 51 90-100 200.90 0-30 936.72 12.0 16.8 2 66 59 53 48 64 57 51 47 54 49 45 51 47 43 48 45 42 40 100-110 62.89 0-40 1639.74 21.0 29.5 3 59 51 44 38 57 49 43 38 46 41 36 44 39 35 41 37 34 32 110-120 14.42 0-60 3367.18 43.2 60.6 4 54 44 37 31 52 43 36 31 40 35 30 38 33 29 36 32 28 27 120-130 1.07 0-90 5281.39 67.7 95.0 5 49 39 32 26 47 38 31 26 36 30 25 34 29 25 32 28 24 22 130-140 0.00 90-120 278.21 3.6 5.0 6 45 35 28 23 43 34 27 22 32 26 22 30 25 21 29 24 21 19 140-150 0.00 90-130 279.28 3.6 5.0 7 42 31 24 20 40 30 24 19 29 23 19 27 22 18 26 22 18 16 150-160 0.00 90-150 279.28 3.6 5.0 8 39 28 22 17 37 28 21 17 26 21 17 25 20 16 24 19 16 14 160-170 0.00 90-180 279.28 3.6 5.0 9 36 26 19 15 35 25 19 15 24 19 15 23 18 14 22 17 14 13 170-180 0.00 0-180 5560.68 71.3 100.0 10 34 24 18 14 32 23 17 13 22 17 13 21 16 13 20 16 13 11 Zone Lumens Spacing Criteria Plane Coefficients of Utilization – Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 84 84 84 84 82 82 82 82 77 77 77 73 73 73 69 69 69 68 Total Luminaire Efficiency = 76.6% REPORT NUMBER: ML10HJ5 Lamps: 100 W Pulse Start Metal Halide with 8” Prismatic Glass Refracter – NEMA Type V * CIE Type – Semi-Direct 0-10 9.17 10-20 75.43 20-30 154.76 30-40 266.34 0-180 2.06 Coefficients of Utilization – Zonal Cavity Method 40-50 632.54 90-270 2.20 Effective Floor Cavity Reflectance 0.20 50-60 1155.59 Diagonal 3.26 60-70 1665.76 70-80 693.73 80-90 449.28 Lumens % Lamp % Fixture 1 77 71 67 62 73 68 64 60 63 59 56 58 55 52 53 51 49 46 90-100 177.44 0-30 239.35 3.1 4.0 2 67 58 51 45 64 56 49 44 51 46 41 47 42 38 43 39 36 33 100-110 288.25 0-40 505.69 6.5 8.5 3 59 48 40 34 56 46 39 32 42 36 30 38 33 28 34 30 26 24 110-120 208.52 0-60 2293.81 29.4 38.4 4 52 41 32 26 49 39 31 25 35 28 23 32 26 21 29 24 20 18 120-130 128.19 0-90 5102.58 65.4 85.4 5 47 35 26 20 44 33 25 19 30 23 18 27 21 17 25 20 15 13 130-140 56.80 90-120 674.20 8.6 11.3 6 43 30 22 16 40 29 21 15 26 19 14 24 18 13 21 16 12 10 140-150 14.94 90-130 802.38 10.3 13.4 7 39 27 19 13 37 25 18 13 23 16 12 21 15 11 19 14 10 8 150-160 0.10 90-150 874.12 11.2 13.4 8 36 24 16 11 34 23 15 10 21 14 10 19 13 9 17 12 8 6 160-170 0.00 90-180 874.22 11.2 14.6 9 33 21 14 9 31 20 14 9 19 12 8 17 11 8 15 10 7 5 170-180 0.00 0-180 5976.80 76.6 100.0 10 31 19 12 8 29 19 12 8 17 11 7 15 10 6 14 6 4 940 Spacing Criteria Plane % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 89 89 89 89 85 85 85 85 79 79 79 73 73 73 68 68 68 65 9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Applications Lighting Pendant Mount Fixture with Prismatic Glass Refractor Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard Features • Modular design allows scores of fixture component combinations to meet installation and lighting needs. Many most-used combinations are offered prewired and assembled, complete with lamp, packaged in a single carton and ready to install. • Mogul lamp types and wattages: HPS 50W-150W PSMH 70W-250W • Choice of heat-resistant prismatic glass refractors (NEMA distributions I, III and V), or heat-resistant prismatic glass globes for hazardous area fixtures. Colored and clear polycarbonate globes and Tuff-skin® † coated glass globes are available but are NOT approved for use in classified areas. Fixtures with these globes do NOT comply with code requirements, and should be used in non-classified areas only. Globes and refractors thread directly into ballast housing. • Mounting hoods include cone-shaped pendant hood, standard pendant, flexible pendant, ceiling and wall pendants (tapped for 3/4” or 1” NPT), 25° angle stanchion, and 90° (straight) stanchion (both tapped for 1-1/4” or 1-1/2” NPT). • Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers. Cone hood inhibits build-up that “insulates” fixture and slows heat transfer, and provides increased surface area for more effective heat dissipation. Pendant Cone Fixture with Prismatic Glass Globe and Guard Ceiling Mount Fixture with Prismatic Glass Globe, Guard and Polyester 30° Angle Reflector • Reflector choice includes standard dome and 30º angle types, both made of Fiberglass reinforced white polyester. Highly resistant to unusually corrosive applications. Reflectors are vented for cooler, dirt-free operation and maintained lumen output. They secure to ballast housing with stainless steel screws threading into stainless steel inserts. • For high corrosion resistance, fixture housing, mounting hoods and guards are copperfree cast aluminum with baked epoxy finish, electrostatically applied for uniformity. All exposed hardware is stainless steel. • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360º compression at all points on ballast housing gasket for positive sealing. Swing-away design of captive bolt and nut simplifies servicing. • Body gaskets and globe gaskets are high-temperature silicone rubber. • Capacitors are non-PCB type, thermally isolated from ballast. † Tuff-skin is a registered trademark of Thomas Manufacturing Corp., Parkton, Maryland. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 941 Lighting: Enclosed and Gasketed — Area — HID • Enclosed and gasketed fixtures suitable for use in: — Marine and wet locations — A wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by the National Electrical Code as Class I, Division 2; Class II, Division 1 and 2; and Class III — For Zone 2, the method of protection is AEx nA nR – Restricted Breathing/Nonsparking or AEx nR – Restricted Breathing — Non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust, corrosive atmosphere or high ambient temperatures are encountered. 18% cooler operation allows use in ambient temperatures up to 149°F/65°C depending on fixture component combinations • Typical applications include: — Pulp and paper mills — Processing plants — Chemical plants — Oil refineries — Foundries — Manufacturing plants — Storage areas — Marine applications • Fixtures have NEMA 4X listing. • Suitability includes listing for use where there may be simultaneous exposure to combustible dusts and flammable gases and vapors. See listing pages for compliance data on specific fixture component combinations. Mercmaster™ III HID 50-250 Watt Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Lighting: Enclosed and Gasketed — Area — HID Lighting Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) • Mogul base porcelain socket with nickel-plated contacts has 392 °C/ 200 °C welded leads, prewired to the ballast. Assures trouble-free operation in installations where high ambient temperatures are encountered. • HPS ballasts are High Power Factor (min. P.F. 90%). • A wide range of voltages available (120 to 600 Volt) and ballast types (Reactor, CWA, CWI and Super CWA). • All Mercmaster III mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listings in this catalog section). • For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing. • The AEx nA nR / Ex nR (V) factory sealed Mercmaster III prevents vapors and gases from entering the globe chamber. There are no seals or putty required which will reduce installation time and installation errors. • The AEx nR Mercmaster III fixture requires all wiring entries to be sealed. Standard Materials • Mounting hoods, ballast bodies and guards: copperfree cast aluminum (less than 4/10 of 1%) • Exposed hardware: stainless steel; latch assemblies have stainless steel bolt and captive nut; reflectors and guards attach with strainless steel screws threading into stainless steel inserts. • Reflectors: Fiberglass reinforced white polyester • Globes: heat-resistant prismatic glass • Refractors: heat-resistant prismatic glass Standard Finishes • Mounting hoods, ballast bodies, guards: epoxy powder coat finish, electrostatically applied for complete, uniform surface protection • Reflectors: white polyester finish Fixtures Outside Type (Salt Water) Type 4X IP66 • Hot Restrike will restrike HPS lamp immediately when power is restored after a momentary power interruption. Add suffix -R. • Smart Hot Restrike will immediately restrike HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps. Add suffix -SR. • Smart Starter incorporates a 1-1/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location, reducing maintenance and repair costs. Available for all HPS and PSMH fixtures. Add suffix -S. • Optional photocell for all fixtures except cone and ceiling mount provides automatic “on-off” control. • Quartz Auxiliary comes to full brightness immediately and remains lit until the HID lamp attains 60-70% of full illumination. Quartz Auxiliary supplied with relay switch and socket to accept 120 V quartz double contact bayonet base lamp (not included). Add suffix -E to fixture catalog number. ‡ Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844, UL 60079-0, UL 60079-15 • UL Listed: E10444 Related Products • Classified area photo controls are also available. Options • AEx nA nR fixtures are available with a Class I, Zone 2 rating. Add suffix -Z2. • AEx nR fixtures are available with a Class I, Zone 2 rating. Add suffix -ZB. • Ex nR fixtures, add suffix -Z V. • Fuses can be field-installed on Mercmaster III fixtures. Kits include fuse block, wire connectors and screws for attaching to mounting hood. Fixtures with fuses do not comply with Marine Type Electric Fixtures Outside Type (Salt Water) requirements for marine listing. For fuse kits, see Electrical Specifications and Fuse Kits page. ‡ Fixtures equipped with a quartz auxiliary lamp do not comply with UL requirements and are not suitable for use in classified locations. V CSA Certification Only. 942 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Illustrated Features Lighting High Temperature Sockets Mogul base high-temperature porcelain sockets. Aluminum Inner Reflector Solid aluminum inner reflector (for refractor ballast housings only) improves photometric efficiency. Globe Chamber (Zone 2) Completely sealed from the ballast housing and outside vapors/air (nA nR). "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. Terminal Blocks (Zone 2) A seven-point terminal block is provided to facilitate wiring. Terminal block accommodates wire size ranging from #8 to #24 AWG. Stainless Steel Inserts Ballast bodies have stainless steel threaded inserts to receive stainless steel screws for reflectors and guard. Prevents "freezing”, allowing guards and reflectors to be easily removed and replaced at any time, without damage to the housing. Ballast Assembly (Zone 2) Utilizing non-sparking components avoiding the ignition of gases or vapors that may be present (nA). Mounting Hood and Globe Gaskets Silicone rubber gasket seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Photocell Available for all fixtures except cone and ceiling mount. Installs through knock-out in mounting hood. Provides continuous ON-OFF dusk-to-dawn control. Heat-Resistant Globes and Refractors Prismatic glass globes and refractors are heat-resistant. They thread directly into the ballast housing and seal against a hightemperature silicone rubber gasket. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 943 Lighting: Enclosed and Gasketed — Area — HID Vented Reflectors Reflectors are thick, tough fiberglass- reinforced white polyester, vented for cooler operation. Quickly attach with furnished stainless steel screws. Mercmaster™ III HID 50-250 Watt Emergency Luminaires Accessories and Options High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Lighting Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Fixtures Outside Type (Salt Water) Type 4X IP66 Quartz Emergency Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures * Mercmaster fixtures for or metal halide and high pressure sodium lamps can be supplied with a socket to accept a 150 W or 250 W, 120 V quartz lamp. This D.C. bayonet base socket is in addition to the standard lamp socket. In the event of a momentary power interruption, the quartz lamp is automatically switched on. The single ended quartz lamp remains energized until the HID restrikes and reaches about 60% output. Quartz Emergency Light Lighting: Enclosed and Gasketed — Area — HID Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) The quartz emergency lamp socket is wired to a 120 V tap on the ballast and is therefore independent of the lighting fixture voltage. No special field wiring is necessary. Description Catalog Suffix For fixture volts of 120, 208, 240 or 277 -MTE For fixture volts of 480 -48E Quartz Emergency Light for HPS Fixtures QuartzPSMH Emergencyor Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures HPS Smart Hot Restrike Accessory for HPS Fixtures Mercmaster fixtures for high pressure sodium lamps can be supplied with a special ignitor (starter board). It instantly restrikes a hot high pressure sodium lamp when a momentary power interruption occurs. This special ignitor, supplied in place of the standard ignitor, is a potted solid state device, totally factory installed. It is not suitable for field installation. The hot lamp restart option provides instant restart of 50, 70, 100 and 150 W HPS lamps after power outages of up to 10 seconds. The lamps restrike instantly at almost full lumens. For power interruptions of up to 30 seconds, the restart of the high pressure sodium lamp is also instant but at less than full lumens. The hot lamp restart accessory does not accelerate cold lamp start up or starting where the power outage is of a duration which has allowed the HPS lamp to cool. Smart Hot Restrike HPS Smart Hot Restrike Accessory for HPS Fixtures HPS Smart Hot Restrike Accessory for HPS Fixtures Accessory Options Additional Advantages of the Smart Hot Restrike: • Protects against self destruction in the event of failed, missing or broken lamps, or socket or Quartzfailure. Emergency Light lead wire • Prevents “End of Life” lamps from continuous cycling over long periods of time. • Remains unaffected by stray voltages, moderate overvoltages, as well as undervoltage conditions. • Drops into the background during normal lamp operation with exceptionally low insertion loss. • Fully encapsulated construction assures electrical integrity and mechanical vibration protection. • UL recognized component. Quartz Emergency Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures Description For fixture watts of 50, 70, 100 or 150 (HPS only) Catalog Suffix -SR Guards: Guards are die-cast copperfree aluminum with baked epoxy finish to match fixtures. Fixture supplied with stainless steel mounting screws which thread into stainless steel inserts on fixture housing to attach guard. To order fixture with guard, add suffix -G to catalog number before adding voltage suffix. ➋ Reflectors: Standard dome and 30° angle polyester reflectors are shown elsewhere in this catalog section. ➌ Hot Restrike: Instantly restrikes a hot HPS lamp when power is restored after a momentary outage. Available factory-installed only. To order, add suffix -R to catalog number. ➍ Quartz Emergency Light: When ordered, HPS fixtures will be supplied with a prewired special DC bayonet base socket to accept a 150W, 120V quartz lamp (not furnished) that automatically switches on when a power outage occurs. Fixtures ordered with this quartz emergency lamp feature do NOT comply with requirements for classified areas and should be used only in non-classified locations. To order, add suffix -E to catalog number and specify if a relay switch is desired. ➎ Photocell and Fuses: Photocontrol are available within the Lighting Section. Smart Starter: Performs as a conventional starter in lamp start-up. Removes itself from circuit at end of lamp life or if lamp is out of socket. Add suffix -S to catalog number. Smart Hot Restrike (HPS only): Will immediately restrike HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps. Add suffix -SR to catalog number. *NOTE: Fixtures equipped with quartz emergency light do not comply with UL requirements and are not suitable for use in classified locations. V CSA Certification Only. 944 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaires High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide KP L 70 Lamp Type: L - High Pressure Sodium H or P - Pulse Start Metal Halide ➊ J5 Hub Size: 75 - 3/4” NPT 10 - 1” NPT 125 - 1-1/4” NPT stanchion 150 - 1-1/2” NPT stanchion Wattage: 10 - 100 W HPS, PSMH 15 - 150 W HPS, PSMH 17 - 175 W PSMH 20 - 200 W PSMH 25 - 250 W PSMH 50 - 50 W HPS (MT - Voltage Only) 70 - 70 W HPS, PSMH 17 - 175 W MH V 25 - 250 W MH V G Guard Options: G - Guard Blank - No Guard Optical Assembly: Blank - Glass Globe J1 - NEMA I Glass Refractor J3 - NEMA III Glass Refractor J5 - NEMA V Glass Refractor G3 - Large Glass Globe MT R Z2 Options: E - Emergency Quartz F - Fuse Kit (Specify Voltage) R - Hot Restrike (50-150 W HPS only) S - Smart Starter SR - Smart Hot Restrike K - Kynar Coating H1 - Photocontrol 120 V H2 - Photocontrol 208 V H3 - Photocontrol 240 V H4 - Photocontrol 277 V C - Safety Cable Adapted V E40 - Export Socket D - E-40 Export Socket V T - Terminal Blocks V V - Anti-Vibration Modifications V X - Appledapter ➌ Mounting Hood Adapter V Voltage: ➋ MT - 120/208/240/277, 60 Hz 5MT - 120/208/240/ 277/480, 60 Hz 48 - 480, 60 Hz 125 - 120, 50 Hz 225 - 225, 50 Hz 226 - 220, 60 Hz 235 - 230, 50 Hz 245 - 240, 50 Hz C2 - 208, 60 Hz, CWI V C3 - 240, 60 Hz, CWI V C6 - 480, 60 Hz, CWI V C7 - 600, 60 Hz, CWI V TT - 120/277/347, 60 Hz, CWA V Lighting: Enclosed and Gasketed — Area — HID Mounting: A - Pendant (rigid mounting) C - Ceiling CH - Pendant Cone Hood F - Pendant (flexible mounting) ST - 90° Stanchion S - 25° Stanchion WB - Wall 10 Lighting Series: KP Mercmaster III 250 A Suffix: Z2 - Zone 2 suffix (required for AEx nA nR rating) ZB - Zone 2 suffix (required for AEx nR rating) Z - Zone 2 suffix (required for Ex nR) V Reflectors are ordered separately – see Accessories page. ➊ H - Lamp type is for 70W and 100W fixtures only. P - Lamp type is for 175W, 200W and 250W fixtures only. ➋ Voltages shown are limited to specific combinations. ➌ Appledapter is available for use with the pendant, ceiling and angled stanchion mounting only. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 945 Mercmaster™ III HID 50-250 Watt Luminaire Thermal Performance Class I, Division 2; Class II, Division 1; Simultaneous Exposure to Hazardous Conditions of Both Classifications Temperature Identification Numbers of Mercmaster III fixtures. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Mercmaster III fixtures are listed for “Simultaneous Exposure” to combinations of Class I, Division 2 and Class II, Division 1 hazardous conditions. Lighting: Enclosed and Gasketed — Area — HID Lighting “T” Numbers for Mercmaster III Fixtures Lamp Watts Type 50 HPS 70 HPS 100 HPS 150 HPS 70 PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 PSMH 175 MH V 250 MH V Supply Wire Temp. (°F/°C) 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 194/90 257/125 194/90 194/90 221/105 194/90 194/90 194/90 194/90 194/90 194/90 194/90 Ambient Temp. (°F/°C) 104/40 131/55 149/65 104/40 131/55 149/65 104/40 104/40 131/55 149/65 104/40 104/40 131/55 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 104/40 131/55 104/40 131/55 104/40 Globe T3C T3A T3A T3B T3A T3 T2D — T2D T2D T2B — T2B T3A T3A T3 T3 T3 T2D T2B T2A T2A T2B T2A T2A T2B T2B T2 T2 T2B T2A 325 Simultaneous Exposure Class I, Division 2 Class II, Division 1 Groups E, F and G ➊ Class I, Division2 / Class II, Division 1 Globe & G3 8” Globe & G3 8” Globe & G3 8” Reflector Globe Refractor Globe Reflector Globe Refractor Globe Reflector Globe Refractor T3B — T3C T4A T4 — T6 T3A T3 — T3C T3A — T3A T4 T3B — T5 T3 T3 — T3A T3 — T3A T3C T3C — T4A T2D T2D — T3 T3A — T3C T4 T3C — T6 T3 T3 — T3A T3A — T3B T3C T3C — T5 T2D T2D — T3 T3A — T3A T3C T3B — T4A T2C T2C — T3 T2D T3 T3 — T3A (EF) T3 (EF) — — — — — — — — T3B — T4A T4A T2B T2B T2C T2C T2D T3 T3 — — T4 T4 — — T2B T2B T2D T2D T2D — — — — — — — — T2B — T2C — — — T3C T2 — — T2B — — — T3 (EF) — — — — — — — T2A — T2B — — — — — — — — T3A — T3A — — — T3C — — — — T3A — T3A — — — T3C — — — — T2 — T3 — — — T3C — — — — T3 — T3 — — — T3C — — — T2B T3 — T3 — — — T3C — — — T2A T2D — T2D — — — T3C — — — — T2B — T2B — — — T3C — — — T2B T2A — T2B — — — T3C — — — T2A T2 — T2B — — — T3C — — — — T2B — T2B — — — T3C — — — T2B T2A — T2B — — — T3C — — — T2A T2 — T2B — — — — — — — — T2B — T2B — — — T3B — — — — T2B — T2B — — — — — — — — T2 — T2 — — — — — — — — T2 — T2 — — — — — — — — T2B — T2B — — — T3C — — — — T2A — T2B — — — T3C — — — — 325 — T2 — — — T3B — — — — “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 ➊ All Class II T Numbers are E, F, G unless otherwise indicated. V CSA Certification Only. 946 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Thermal Performance Class I, Zone 2, AEx nA nR IIC; Class 1 Zone 2, AEx nR IIC; IP66; and NEMA 4X Temperature Identification Numbers of Mercmaster III Fixtures. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Operating Temperatures: “T” Numbers for Zone 2 Mercmaster III Fixtures The “T” number is established by separately determining the maximum temperature of the globe surface and ballast compartment. The hotter of the two is taken to determine the “T” number for the overall fixture. Watts Type 50 HPS 100 150 70 100 150 175 200 250 HPS HPS HPS PSMH PSMH PSMH PSMH PSMH PSMH Ambient Temp. (°F/°C) 104/40 Globe T4 Globe & Reflector T4 Refractor Only T6 G3/Refractor & Reflector T4 Globe T4 Globe & Reflector T4 Refractor Only T6 G3/Refractor & Reflector T4 194/90 131/55 T4 T3 T5 T3 T4 T3 T5 T3 194/90 149/65 T3 T3 T4 T3 T3 T3 T4 T3 194/90 104/40 T4 T4 T4 T4 T6 T5 T6 T4 194/90 131/55 T4 T4 T4 T3 T5 T4 T5 T3 194/90 149/65 T4 T4 T3 T3 T4 T4 T5 T3 194/90 104/40 T4 T4 T4 T4 T5 T4 T6 T4 194/90 131/55 T4 T4 T3 T3 T4 T4 T5 T3 194/90 149/65 T4 T4 T3 T3 T4 T4 T4 T3 194/90 104/40 T4 T3 T3 T3 T4 T4 T5 T4 194/90 131/55 T3 T3 T3 T3 T4 T4 T4 T3 221/105 65 T3 T3 T3 T3 T4 T3 T4 T3 194/90 104/40 T4 T4 T4 — T5 T4 T6 — 194/90 131/55 T3 T3 T3 — T4 T4 T5 — 194/90 149/65 T3 T3 T3 — T4 T3 T4 — 194/90 104/40 T3 T3 T3 — T5 T4 T6 — 194/90 131/55 T3 T3 T3 — T4 T4 T5 — 194/90 149/65 T3 T3 T3 — T4 T3 T4 — 194/90 104/40 T4 T4 T4 — T4 T4 T5 — Class I, Zone 2 AEx nA nR IIC Class I, Zone 2 AEx nR IIC 194/90 131/55 T3 T3 T3 — T4 T3 T4 — 221/105 149/65 T3 T3 T3 — T4 T3 T4 — 194/90 104/40 T3 T3 T4 — T3 T3 T4 — 194/90 131/55 T3 T3 T3 — T3 T3 T4 — 221/105 149/65 T3 T3 T3 — T3 T3 T4 — 194/90 104/40 T3 T3 T4 — T3 T3 T4 — 221/105 131/55 T3 T3 T3 — T3 T3 T4 — 221/105 149/65 T3 T3 T3 — T3 T3 T4 — 194/90 104/40 T3 T3 T3 — T3 T3 T3 — 194/90 131/55 T3 T3 T3 — T3 T3 T3 — Lighting: Enclosed and Gasketed — Area — HID 70 Supply Wire Temp. (°F/°C) 194/90 “T” Numbers Represent the Maximum Surface Temperature for Luminaries with AEx nA nR or AEx nR rating “T” Number T1 T2 T3 T4 T5 T6 Temp. Range (°F) 547-842 394-572 277-392 214-275 187-212 185 Temp. Range (°C) 301-450 201-300 136-200 101-135 86-100 85 V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting Lamp 947 Mercmaster™ III HID 50-250 Watt Luminaire Classified Area Suitability Class I, Division 2; Class II, Division 1; Simultaneous Exposure to Hazardous Conditions of Both Classifications Maximum Temperatures in °F/°C Obtained from Tests in a 104 °F/40 °C Ambient, Vertical Position, Lamp Base Up, as per NEC. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Fixture Selection Guide Indicates atmosphere for which fixture is suitable Lighting Denotes fixture with Globe Only. ➋ Denotes fixture with Globe and Reflector. ➌ Denotes fixture with 8” Refractor / G3 Globe Ignition °F/°C ➍ Minimum Fixture “T” Number for Chemical 581/305 T2 acrolein (inhibited) 428/220 arsine butadiene ethylene oxide hydrogen propylene oxide propylnitrate NA ➋ 788/420 804/429 932/500 840/449 347/175 acetaldehyde allyl alcohol n-butyraldehyde carbon monoxide crotonaldehyde cyclopropane diethyl ether (ethyl ether) diethylamine ethylene ethylenimine Class I, Division 2 Chemical Group A Atmospheres acetylene HPS (Watts) 50 70 100 PSMH (Watts) 150 70 100 175 ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋➌ ➋➌ T2D ➋➌ ➋➌ ➋➌ ➋ ➋➌ 350 350 T1 350 T3B ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ 347/175 712/378 424/218 1128/609 450/232 928/498 320/160 594/312 842/450 608/320 T3B 350 T2D T1 T2C T1 T3C T2 T1 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➌ ➋➌ ➋➌ ➋➌ ➊ ➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➌ ➋➌ ➋➌ ➋➌ ethly mercaptan 572/300 ethyl sulfide hydrogen cyanide 200 250 ➌ ➋ Lighting: Enclosed and Gasketed — Area — HID Group B Atmospheres ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➌ ➋ ➋ ➋ Group C Atmospheres ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋➌ ➋➌ ➌ ➋ NA ➎ 1000/538 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋➌ ➋➌ ➋➌ ➋ hydrogen sulfide 500/260 T2B ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋➌ ➋➌ morpholine 2-nitropropane tetrahydrofuran unsymmetrical dimethyl hydrazine 590/310 802/428 610/321 480/249 T2 350 T2 T2C ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➌ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➌ ➋➌ ➋ ➋ ➋ ➋ 867/464 869/465 898/481 1204/651 928/498 549/287 649/343 T1 T1 T1 T1 T1 T2A 325 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➌ ➋➌ ➋➌ ➋ Group D Atmospheres acetic acid (glacial) acetone acrylonitrile ammonia benzene butane 1-butanol (butyl alcohol) ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ This classified area suitability chart is based on NEC requirements and Appleton and UL testing. However, the ultimate decision on suitability of these fixtures for classified areas depends solely on the judgement of the owner, insurance company, inspector and/or authority having jurisdiction. ➍ Ignition temperatures shown should be regarded as approximations only. Per NFPA Bulletin 325M, ignition temperatures may vary according to such factors as vapor/air mixture, size and space where ignition may occur, rate and duration of heating, oxygen concentration and other materials present. ➎ Not Available. ➏ A saturated hydrocarbon mixture. Also known by synonyms benzine, ligroin, petroleum, ether and naptha. V CSA Certification Only. 948 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Classified Area Suitability Class I, Division 2; Class II, Division 1; Simultaneous Exposure to Hazardous Conditions of Both Classifications Maximum Temperatures in °F/°C Obtained from Tests in a 104 °F/40 °C Ambient, Vertical Position, Lamp Base Up, as per NEC. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Fixture Selection Guide Indicates atmosphere for which fixture is suitable Denotes fixture with Globe Only. ➋ Denotes fixture with Globe and Reflector. ➌ Denotes fixture with 8” Refractor / G3 Globe PSMH (Watts) 761/405 797/425 350 350 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ isobutyl acetate 790/421 350 ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋➌ ➋➌ ➋➌ ➋ sec-butyl alcohol di-isobutylene ethane ethanol (ethyl alcohol) ethyl acetate ethylene diamine (anhydrous) ethylene dichloride gasoline (56-60 octane) heptanes hexanes isoprene isopropyl ether mesityl oxide methane (natural gas) methanol (methyl alcohol) 3-methyl-l-butanol (isoamyl alcohol) methyl ethyl ketone methyl isobutyl ketone 2-methyl-1-propanol (isobutyl alcohol) 2-methyl-1-propanol (tertiary butyl alcohol) petroleum naphtha ➏ pyridine octanes pentanes 1-pentanol (amyl alcohol) propane 1-propanol (propyl alcohol) 2-propanol (isopropyl alcohol) propylene styrene toluene vinyl acetate 649/343 736/391 882/472 685/363 799/426 725/385 775/413 536/280 399/204 433/223 743/395 829/443 651/344 999/537 725/385 662/350 759/404 838/448 779/415 892/478 550/288 900/482 403/206 500/260 572/300 810/432 774/412 750/399 851/455 914/490 896/480 756/402 325 350 T1 350 350 350 350 T2A T3 T2D 350 350 325 T1 350 350 350 350 350 T1 T2A T1 T3 T2B T2 350 350 350 T1 T1 T1 350 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ vinyl chloride 882/472 T1 ➋➌ ➋➌ ➋➌ ➋➌ xylenes (o-xylene) 865/463 T1 ➋➌ ➋➌ ➋➌ ➋➌ 50 70 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ 100 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ 150 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ 70 100 175 200 250 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋ ➋ ➋➌ ➋➌ ➋➌ ➋ This classified area suitability chart is based on NEC requirements and Appleton and UL testing. However, the ultimate decision on suitability of these fixtures for classified areas depends solely on the judgement of the owner, insurance company, inspector and/or authority having jurisdiction. ➍ Ignition temperatures shown should be regarded as approximations only. Per NFPA Bulletin 325M, ignition temperatures may vary according to such factors as vapor/air mixture, size and space where ignition may occur, rate and duration of heating, oxygen concentration and other materials present. ➎ Not Available. ➏ A saturated hydrocarbon mixture. Also known by synonyms benzine, ligroin, petroleum, ether and naptha. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 949 Lighting: Enclosed and Gasketed — Area — HID Class I, Division 2 Chemical Group D Atmospheres 2-butanol (secondary butyl alcohol) n-butyl acetate Minimum Fixture “T” Number for Chemical Lighting HPS (Watts) Ignition °F/°C ➍ Mercmaster™ III HID 50-250 Watt Luminaire Classified Area Suitability Class I, Zone 2, AEx nA nR IIC; Class 1 Zone 2, AEx nR IIC; IP66; and NEMA 4X Maximum Temperatures in ºF/ºC Obtained from Tests in a 104 ºF/40 ºC Ambient, Vertical Position, Lamp Base Up. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Fixture Selection Guide Indicates atmosphere for which fixture is suitable Lighting: Enclosed and Gasketed — Area — HID Lighting ➋ Denotes fixture with Globe and Reflector. ➌ Denotes fixture with 8” Refractor. HPS (Watts) PSMH (Watts) Ignition °F/°C ➍ Minimum Fixture “T” Number for Chemical 50 70 100 150 70 100 175 200 250 acetylene 581/305 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ acetylene 572/300 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ hydrogen 932/500 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ 914/490 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ butadiene 1.3 797/425 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ carbon monoxide coke oven gas 1040/560 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ diethyl ether (ethyl ether) 320/160 T4 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ethylene 842/450 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ethylenimine ethylene oxide 797/425 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ acetone 869/465 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ amyl acetate 707/375 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ammonia 1204/651 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ benzene 928/498 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ butane 549/287 T3 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ 1-butanol (butyl alcohol) 649/343 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ n-butyl acetate cyclohexane 500/260 T3 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ethyl methyl ketone 959/515 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ethanol (ethyl alcohol) 685/363 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ethyl acetate 799/426 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ heptanes 399/204 T3 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ hexanes 433/223 T3 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ isoprene isobutanol 806/430 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ mesityl oxide methyl acetate 932/500 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ methanol (methyl alcohol) 725/385 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ n-propyl acetate 932/500 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ n-butul acetate 788/420 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ pentanes 500/260 T3 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ propane 810/432 T2 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ xylenes (o-xylene) 865/463 T1 ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ ➋➌ Class I, Division 2 Chemical Group IIC Group IIB ethylene Group IIA ➋➌ This classified area suitability chart is based on NEC requirements and Appleton and UL testing. However, the ultimate decision on suitability of these fixtures for classified areas depends solely on the judgement of the owner, insurance company, inspector and/or authority having jurisdiction. ➍ Ignition temperatures shown should be regarded as approximations only. Per NFPA Bulletin 325M, ignition temperatures may vary according to such factors as vapor/air mixture, size and space where ignition may occur, rate and duration of heating, oxygen concentration and other materials present. V CSA Certification Only. 950 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaires 50 W, 70 W, 100 W, 150 W HPS High Reactance, High Power Factor (min. P.F. 90%). Heat-Resistant Prismatic Glass Globe or Closed Prismatic Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎ with Type V 8” Refractor with Globe or G3 Globe ➋ HPS HPS HPS 70 100 150 3/4 KPAL5075 KPAL5075J5 1 KPAL5010 KPAL5010J5 3/4 KPAL7075 KPAL7075J5 1 KPAL7010 KPAL7010J5 3/4 KPAL1075 KPAL1075J5 1 KPAL1010 KPAL1010J5 3/4 KPAL1575 KPAL1575J5 1 KPAL1510 KPAL1510J5 3/4 KPCHL5075 KPCHL5075J5 1 KPCHL5010 KPCHL5010J5 3/4 KPCHL7075 KPCHL7075J5 1 KPCHL7010 KPCHL7010J5 3/4 KPCHL1075 KPCHL1075J5 1 KPCHL1010 KPCHL1010J5 3/4 KPCHL1575 KPCHL1575J5 1 KPCHL1510 KPCHL1510J5 3/4 KPCL5075 KPCL5075J5 1 KPCL5010 KPCL5010J5 3/4 KPCL7075 KPCL7075J5 1 KPCL7010 KPCL7010J5 3/4 KPCL1075 KPCL1075J5 1 KPCL1010 KPCL1010J5 3/4 KPCL1575 KPCL1575J5 1 KPCL1510 KPCL1510J5 Lighting: Enclosed and Gasketed — Area — HID HPS 50 Lighting Pendant — One Hub, Rigid Mounting ➊ Pendant Cone — One Hub, Rigid Mounting HPS 50 HPS 70 HPS 100 HPS 150 Ceiling — Five Hubs, Four Close-Up Plugs HPS 50 HPS 70 HPS 100 HPS 150 ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixtures with large globe change J5 to G3; for fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 50 X — — — X X — X — — — — X HPS 70 X — X X X X — X — — — — X HPS 100 X — X X X X — X — — X X X HPS 150 X — X X X X — X — — X X X PSMH 70 X — X X X — — X — — — — X PSMH 100 X — X X X — — X — — — — X PSMH 150 X — X X X — — X — — — — X PSMH 175 X X X — — — — — — — — — X PSMH 200 X — X — — — — — — — — — X PSMH 250 X — — — — — — — — — — — X 175 X — — X X — — X X X X X X MH V 250 X — — X X — — X X X X X X MH V 245 - 240 V 50 Hz Voltages: 125 - 120 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➍ Add -Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add -ZB suffix for restricted breathing protection (AEx nR). ➎ For fixtures with guards, add letter G before adding voltage designation. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 951 Mercmaster™ III HID 50-250 Watt Luminaires 50 W, 70 W, 100 W, 150 W HPS High Reactance, High Power Factor (min. P.F. 90%). Heat-Resistant Prismatic Glass Globe or Closed Prismatic Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lighting Lamp Type Wall — Five Hubs, Four Close-Up Plugs HPS 50 HPS 70 HPS Lighting: Enclosed and Gasketed — Area — HID Lamp Watts 100 HPS 150 HPS 50 Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎ with Type V 8” Refractor with Globe or G3 Globe ➋ 3/4 KPWBL5075 KPWBL5075J5 1 KPWBL5010 KPWBL5010J5 3/4 KPWBL7075 KPWBL7075J5 1 KPWBL7010 KPWBL7010J5 3/4 KPWBL1075 KPWBL1075J5 1 KPWBL1010 KPWBL1010J5 3/4 KPWBL1575 KPWBL1575J5 1 KPWBL1510 KPWBL1510J5 1-1/4 KPSL50125 KPSL50125J5 1-1/2 KPSL50150 KPSL50150J5 1-1/4 KPSL70125 KPSL70125J5 1-1/2 KPSL70150 KPSL70150J5 1-1/4 KPSL10125 KPSL10125J5 1-1/2 KPSL10150 KPSL10150J5 1-1/4 KPSL15125 KPSL15125J5 1-1/2 KPSL15150 KPSL15150J5 1-1/4 KPSTL50125 KPSTL50125J5 1-1/2 KPSTL50150 KPSTL50150J5 1-1/4 KPSTL70125 KPSTL70125J5 1-1/2 KPSTL70150 KPSTL70150J5 1-1/4 KPSTL10125 KPSTL10125J5 1-1/2 KPSTL10150 KPSTL10150J5 1-1/4 KPSTL15125 KPSTL15125J5 1-1/2 KPSTL15150 KPSTL15150J5 25° Stanchion — One Hub HPS 70 HPS 100 HPS 150 HPS 50 90° Stanchion — One Hub HPS HPS HPS 70 100 150 ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixtures with large globe change J5 to G3; for fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 50 X — — — X X — X — — — — X HPS 70 X — X X X X — X — — — — X HPS 100 X — X X X X — X — — X X X HPS 150 X — X X X X — X — — X X X PSMH 70 X — X X X — — X — — — — X PSMH 100 X — X X X — — X — — — — X PSMH 150 X — X X X — — X — — — — X PSMH 175 X X X — — — — — — — — — X PSMH 200 X — X — — — — — — — — — X PSMH 250 X — — — — — — — — — — — X 175 X — — X X — — X X X X X X MH V 250 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V 48 - 480 V 60 Hz ➍ Add -Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add -ZB suffix for restricted breathing protection (AEx nR). ➎ For fixtures with guards, add letter G before adding voltage designation. V CSA Certification only. 952 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt 70 W, 100 W, 150 W, 175 W, 200 W, 250 W PSMH High Reactance, High Power Factor (min. P.F. 90%). Heat-Resistant Prismatic Glass Globe or Closed Prismatic Glass Refractor. Mogul Base Lamps Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Pendant — One Hub, Rigid Mounting ➊ Lamp Watts PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 ➏ Pendant Cone — One Hub, Rigid Mounting PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 ➏ Ceiling — Five Hubs, Four Close-Up Plugs PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 ➏ 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 KPAH7075 KPAH7010 KPAH1075 KPAH1010 KPAP1575 KPAP1510 KPAP1775 KPAP1710 KPAP2075 KPAP2010 KPAP2575 KPAP2510 KPAH7075J5 KPAH7010J5 KPAH1075J5 KPAH1010J5 KPAP1575J5 KPAP1510J5 KPAP1775J5 KPAP1710J5 KPAP2075J5 KPAP2010J5 KPAP2575J5 KPAP2510J5 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 KPCHH7075 KPCHH7010 KPCHH1075 KPCHH1010 KPCHP1575 KPCHP1510 KPCHP1775 KPCHP1710 KPCHP2075 KPCHP2010 KPCHP2575 KPCHP2510 KPCHH7075J5 KPCHH7010J5 KPCHH1075J5 KPCHH1010J5 KPCHP1575J5 KPCHP1510J5 KPCHP1775J5 KPCHP1710J5 KPCHP2075J5 KPCHP2010J5 KPCHP2575J5 KPCHP2510J5 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 KPCH7075 KPCH7075 KPCH1075 KPCH1010 KPCP1575 KPCP1510 KPCP1775 KPCP1710 KPCP2075 KPCP2010 KPCP2575 KPCP2510 KPCH7075J5 KPCH7010J5 KPCH1075J5 KPCH1010J5 KPCP1575J5 KPCP1510J5 KPCP1775J5 KPCP1710J5 KPCP2075J5 KPCP2010J5 KPCP2575J5 KPCP2510J5 Lighting: Enclosed and Gasketed — Area — HID 70 Catalog Numbers ➌➍➎ with Globe with Type V 8” Refractor ➋ Lighting PSMH Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixtures with large globe change J5 to G3; for fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 50 X — — — X X — X — — — — X HPS 70 X — X X X X — X — — — — X HPS 100 X — X X X X — X — — X X X HPS 150 X — X X X X — X — — X X X PSMH 70 X — X X X — — X — — — — X PSMH 100 X — X X X — — X — — — — X PSMH 150 X — X X X — — X — — — — X PSMH 175 X X X — — — — — — — — — X PSMH 200 X — X — — — — — — — — — X PSMH 250 X — — — — — — — — — — — X 175 X — — X X — — X X X X X X MH V 250 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V 48 - 480 V 60 Hz ➍ Add -Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add -ZB suffix for restricted breathing protection (AEx nR). ➎ For fixtures with guards, add letter G before adding voltage designation. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 953 Mercmaster™ III HID 50-250 Watt Luminaires 70 W, 100 W, 150 W, 175 W, 200 W, 250 W PSMH High Reactance, High Power Factor (min. P.F. 90%). Heat-Resistant Prismatic Glass Globe or Closed Prismatic Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lighting: Enclosed and Gasketed — Area — HID Lighting Lamp Type Wall — Five Hubs, Four Close-Up Plugs Lamp Watts PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 ➏ PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 ➏ PSMH 70 PSMH 100 PSMH 150 PSMH 175 PSMH 200 PSMH 250 ➏ 25° Stanchion — One Hub Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎ with Globe with Type V 8” Refractor ➋ 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 KPWBH7075 KPWBH7010 KPWBH1075 KPWBH1010 KPWBP1575 KPWBP1510 KPWBP1775 KPWBP1710 KPWBP2075 KPWBP2010 KPWBP2575 KPWBP2510 KPWBH7075J5 KPWBH7010J5 KPWBH1075J5 KPWBH1010J5 KPWBP1575J5 KPWBP1510J5 KPWBP1775J5 KPWBP1710J5 KPWBP2075J5 KPWBP2010J5 KPWBP2575J5 KPWBP2510J5 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 KPSH70125 KPSH70150 KPSH10125 KPSH10150 KPSP15125 KPSP15150 KPSP17125 KPSP17150 KPSP20125 KPSP20150 KPSP25125 KPSP25150 KPSH70125J5 KPSH70150J5 KPSH10125J5 KPSH10150J5 KPSP15125J5 KPSP15150J5 KPSP17125J5 KPSP17150J5 KPSP20125J5 KPSP20150J5 KPSP25125J5 KPSP25150J5 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 KPSTH70125 KPSTH70150 KPSTH10125 KPSTH10150 KPSTP15125 KPSTP15150 KPSTP17125 KPSTP17150 KPSTP20125 KPSTP20150 KPSTP25125 KPSTP25150 KPSTH70125J5 KPSTH70150J5 KPSTH10125J5 KPSTH10150J5 KPSTP15125J5 KPSTP15150J5 KPSTP17125J5 KPSTP17150J5 KPSTP20125J5 KPSTP20150J5 KPSTP25125J5 KPSTP25150J5 90° Stanchion — One Hub Shown with Globe and Optional Guard ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixtures with large globe change J5 to G3; for fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 50 X — — — X X — X — — — — X HPS 70 X — X X X X — X — — — — X HPS 100 X — X X X X — X — — X X X HPS 150 X — X X X X — X — — X X X PSMH 70 X — X X X — — X — — — — X PSMH 100 X — X X X — — X — — — — X PSMH 150 X — X X X — — X — — — — X PSMH 175 X X X — — — — — — — — — X PSMH 200 X — X — — — — — — — — — X PSMH 250 X — — — — — — — — — — — X 175 X — — X X — — X X X X X X MH V 250 X — — X X — — X X X X X X MH V 245 - 240 V 50 Hz Voltages: 125 - 120 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➍ Add -Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add -ZB suffix for restricted breathing protection (AEx nR). ➎ For fixtures with guards, add letter G before adding voltage designation. V CSA Certification only. 954 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt 175 W, 250 W MH V High Reactance, High Power Factor (min. P.F. 90%). Heat-Resistant Prismatic Glass Globe or Closed Prismatic Glass Refractor. Mogul Base Lamps Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎ with Globe with Type V 8” Refractor ➋ Pendant — One Hub, Rigid Mounting ➊ 175 MH V 250 ➏ KPAH1775 KPAH1775J5 1 KPAH1710 KPAH1710J5 3/4 KPAH2575 KPAH2575J5 1 KPAH2510 KPAH2510J5 3/4 KPCHH1775 KPCHH1775J5 1 KPCHH1710 KPCHH1710J5 3/4 KPCHH2575 KPCHH2575J5 1 KPCHH2510 KPCHH2510J5 3/4 KPCH1775 KPCH1775J5 1 KPCH1710 KPCH1710J5 3/4 KPCH2575 KPCH2575J5 1 KPCH2510 KPCH2510J5 Lighting: Enclosed and Gasketed — Area — HID 3/4 Lighting MH V Pendant Cone — One Hub, Rigid Mounting MH V 175 MH V 250 ➏ Ceiling — Five Hubs, Four Close-Up Plugs MH V 175 MH V 250 ➏ ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixtures with large globe change J5 to G3; for fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 50 X — — — X X — X — — — — X HPS 70 X — X X X X — X — — — — X HPS 100 X — X X X X — X — — X X X HPS 150 X — X X X X — X — — X X X PSMH 70 X — X X X — — X — — — — X PSMH 100 X — X X X — — X — — — — X PSMH 150 X — X X X — — X — — — — X PSMH 175 X X X — — — — — — — — — X PSMH 200 X — X — — — — — — — — — X PSMH 250 X — — — — — — — — — — — X 175 X — — X X — — X X X X X X MH V 250 X — — X X — — X X X X X X MH V 245 - 240 V 50 Hz Voltages: 125 - 120 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➍ Add -Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add -ZB suffix for restricted breathing protection (AEx nR). ➎ For fixtures with guards, add letter G before adding voltage designation. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 955 Mercmaster™ III HID 50-250 Watt 175 W, 250 W MH V High Reactance, High Power Factor (min. P.F. 90%). Heat-Resistant Prismatic Glass Globe or Closed Prismatic Glass Refractor. Mogul Base Lamps Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lighting: Enclosed and Gasketed — Area — HID Lighting Lamp Type Wall — Five Hubs, Four Close-Up Plugs MH V Lamp Watts 175 MH V 250 ➏ MH V 175 Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➌➍➎ with Globe with Type V 8” Refractor ➋ KPWBH1775 3/4 KPWBH1775J5 1 KPWBH1710 KPWBH1710J5 3/4 KPWBH2575 KPWBH2575J5 1 KPWBH2510 KPWBH2510J5 1-1/4 KPSH17125 KPSH17125J5 1-1/2 KPSH17150 KPSH17150J5 1-1/4 KPSH25125 KPSH25125J5 1-1/2 KPSH25150 KPSH25150J5 1-1/4 KPSTH17125 KPSTH17125J5 1-1/2 KPSTH17150 KPSTH17150J5 1-1/4 KPSTH25125 KPSTH25125J5 1-1/2 KPSTH25150 KPSTH25150J5 25° Stanchion — One Hub MH V 250 ➏ MH V 175 MH V 250 ➏ 90° Stanchion — One Hub Shown with Globe and Optional Guard ➊ For Flexible Pendant Mount, change A to F in catalog number (except 50 W HPS). ➋ To order fixtures with large globe change J5 to G3; for fixture with NEMA Type I or NEMA Type III refractor, change final digit 5 in catalog number to 1 or 3. ➌ Add the following voltage and frequency designation before Z2 suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 50 X — — — X X — X — — — — X HPS 70 X — X X X X — X — — — — X HPS 100 X — X X X X — X — — X X X HPS 150 X — X X X X — X — — X X X PSMH 70 X — X X X — — X — — — — X PSMH 100 X — X X X — — X — — — — X PSMH 150 X — X X X — — X — — — — X PSMH 175 X X X — — — — — — — — — X PSMH 200 X — X — — — — — — — — — X PSMH 250 X — — — — — — — — — — — X 175 X — — X X — — X X X X X X MH V 250 X — — X X — — X X X X X X MH V 245 - 240 V 50 Hz Voltages: 125 - 120 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➍ Add -Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add -ZB suffix for restricted breathing protection (AEx nR). ➎ For fixtures with guards, add letter G before adding voltage designation. V CSA Certification only. 956 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt PRE-PAK™ Luminaires Factory-Assembled Fixtures For 70 W, 100 W or 150 W High Pressure Sodium Lamps, or 100 W or 175 W Pulse Start Metal Halide Lamps. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 These pre-packaged fixture component combinations are delivered fully assembled and packed in a single carton. They are available with or without lamp, and with choice of globe or NEMA Type I, III or V refractors – all with or without guards. PRE-PAK units simplify ordering, stocking and shipping, and result in savings on job-site assembly and installation time and costs. Lighting Catalog numbers do not include mounting hood or reflector. For mounting hood and reflectors selection, see below and order separately. Hood and Reflector will be packaged separately. Lamp Type and Watts 100 W PSMH ➋ 175 W PSMH 70 W HPS 100 W HPS 150 W HPS 175 W MH V Ballast Assembly with Globe Only KPBU100H-MT KPBU175P-MT KPBU70L-MT KPBU100L-MT KPBU150L-MT KPBU175H-TT Ballast Assembly with Globe and Guard KPBU100HG-MT KPBU175PG-MT KPBU70LG-MT KPBU100LG-MT KPBU150LG-MT KPBU175HG-TT 250 W MH V KPBU250H-TT KPBU250HG-TT Ballast Assembly with G3 Globe Only — — — KPBUG3100L-MT — — — Pendant One Hub, Rigid Mounting Hub Size Catalog (Inches) Number 3/4 KPA-75 1 KPA-100 Pendant — Flexible One Hub, Flexible Mounting 3/4 KPAF-75 1 KPAF-100 Pendant Cone One Hub, Rigid 3/4 KPCH-75 1 KPCH-100 Ceiling Five Hubs, Four Close-Up Plugs Wall Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 3/4 KPWB-75 1 KPWB-100 25° Stanchion One Hub 90° Stanchion One Hub Ballast Assembly with Refractor and Guard KPBU100HJ5G-MT KPBU175PJ5G-MT KPBU70LJ5G-MT KPBU100LJ5G-MT KPBU150LJ5G-MT KPBU175HJ5G-TT KPBU250HJ5-TT KPBU250HJ5G-TT White Polyester Reflectors Furnished with stainless steel screws Mounting Hoods Description Ballast Assembly with Refractor Only ➌ KPBU100HJ5-MT KPBU175PJ5-MT KPBU70LJ5-MT KPBU100LJ5-MT KPBU150LJ5-MT KPBU175HJ5-TT 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 Description Catalog Number Standard Dome For Globe Fixtures KR2-ST 30° Angle For Globe Fixtures KR2-AN Standard Dome For Glass Refractor Fixtures CMR-4ST 30° Angle For Glass Refractor Fixtures CMR-4AN ➊ All catalog numbers above are fixtures without lamp. To order fixture complete with appropriate installed lamp, add suffix L to catalog number. All PRE-PAK fixtures include multi-tap ballast for operation on 120 V, 208 V, 240 V or 277 V lines. Fixture component combinations listed are furnished completely assembled in a single carton. ➋ 100 W fixtures use ED-28 mogul base lamps. ➌ Refractor catalog numbers listed are for NEMA Type V. To order fixture with Type III refractor, change J5 in catalog number to J3; for Type I refractor, change J5 to J1. ➍ For CSA 120/277/347 Vac tri-tap ballast, change -MT to -TT V. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 957 Lighting: Enclosed and Gasketed — Area — HID PRE-PAK Fixtures ➊➍ Mercmaster™ III HID 50-250 Watt Luminaire Mounting Hoods High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Mounting Hoods Description Hub Size (Inches) Catalog Number Lighting Pendant One Hub, Rigid Mounting 3/4 KPA-75 1 KPA-100 3/4 KPAF-75 1 KPAF-100 3/4 KPCH-75 1 KPCH-100 Pendant — Flexible Lighting: Enclosed and Gasketed — Area — HID One Hub, Flexible Mounting Pendant Cone One Hub, Rigid Ceiling Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 3/4 KPWB-75 1 KPWB-100 Wall Five Hubs, Four Close-Up Plugs 25° Stanchion One Hub 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 90° Stanchion One Hub 958 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Ballast Bodies High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Ballast Bodies Ballast Body for Glass Refractor or G3 Globe (shown) High Pressure Sodium High Power Factor (Min. P.F. 90%) Pulse Start Metal Halide Super Constant Wattage Autotransformer (Min. P.F. 90%) Catalog Number ➋➍➎➏ Lamp Watts HPS For Globe For G3 Globe ➊/ Refractor Voltage Suffixes MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V 50 ➌ KPB50L KPBR50L X — — — X X — X — — — — X HPS 70 ➌ KPB70L KPBR70L X — X X X X — X — — — — X HPS 100 ➌ KPB100L KPBR100L X — X X X X — X — — X X X HPS 150 ➌ KPB150L KPBR150L X — X X X X — X — — X X X PSMH 70 KPB70H KPBR70H X — X X X — — X — — — — X PSMH 100 KPB100H KPBR100H X — X X X — — X — — — — X PSMH 150 KPB150P KPBR150P X — X X X — — X — — — — X PSMH 175 KPB175P KPBR175P X X X — — — — — — — — — X PSMH 200 KPB200P KPBR200P X — X — — — — — — — — — X PSMH 250 KPBG250P KPBR250P X — — — — — — — — — — — X MH V 175 KPB175H KPBR175H X — — X X — — X X X X X X MH V 250 KPB250H KPBR250H X — — X X — — X X X X X X Voltages: LB - Incandescent, 120 V 60 Hz MT - 120/208/240/277 V 60 Hz 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz 125 - 120 V 50 Hz 225 - 225 V 50 Hz 226 - 220 V 60 Hz 235 - 230 V 50 Hz 245 - 240 V 50 Hz C2 - 208 V 60 Hz, CWI V C3 - 240 V 60 Hz, CWI V C6 - 480 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, TT - 120/277/347 V 60 Hz, CWA V ➊ For HPS version fixtures only. ➋ After voltage suffix add: -S for Smart Starter. ➌ After voltage suffix add: -SR for Smart Hot Restrike, -R for ballast body with Hot Restrike Ignitor. ➍ Add -E after voltage suffix for ballast body with provision for Quartz Emergency Light. Not suitable for hazardous locations. ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 959 Lighting: Enclosed and Gasketed — Area — HID Lamp Type Lighting Ballast Body for Glass Globe (shown) Mercmaster™ III HID 50-250 Watt Luminaire Optics High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Description Catalog Number Prismatic Glass Globes — Heat-Resistant Lighting For use in areas where fixture is subject to extreme thermal shock Heat-Resistant Clear VPGL-2HR Amber VPGL-2AM Blue VPGL-2BL Green VPGL-2GR Red VPGL-2RE Clear VPGL3HR Clear VPGL-2HRT Clear VPGL-2PL Amber VPGL-2AMPL Green VPGL-2GRPL Red VPGL-2REPL Lighting: Enclosed and Gasketed — Area — HID Glass Globe G3 Glass Globe Tuff-Skin® Coated Prismatic Glass Globes — For Non-Classified Areas For use in areas where fixture is subject to extreme thermal shock Heat-Resistant Tuff-Skin® Glass Globe Polycarbonate Globes — Impact-Resistant ➊ Use 100 watt lamp max. Do not use in ambients exceeding 77 ºF/25 ºC. Polycarbonate Globe ➊ Polycarbonate globes are shatter-resistant – for use in processing plants, canneries, dairies, bakeries or anywhere broken glass would prove a hazard. Ideally suited for areas where vandalism, high replacement and high maintenance costs are a problem. Do not use in ambients exceeding 77 °F/25 °C. For burning in vertical base-up positions only. 960 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Optics High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Light Distribution IES/NEMA Distribution Curves Catalog Number Closed Prismatic Glass Refractors — Heat-Resistant NEMA Type III LPG-R3 NEMA Type V LPG-R5 Closed Prismatic Polymeric Refractors For use with PSMH lamps, 100 W max. 104 °F/40 °C max. ambient temperature. Suitable for Class II, Division 1 and 2, Groups F, G; NEMA 4X, UL 1598A Marine Type Electric Fixtures Outside Type (Salt Water) NEMA Type II LPRF-2CP NEMA Type III LPRF-3CP NEMA Type IV LPRF-4CP NEMA Type V LPRF-5CP Polymeric Refractor Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 961 Lighting: Enclosed and Gasketed — Area — HID LPG-R1 Lighting Glass Refractor NEMA Type I Mercmaster™ III HID 50-250 Watt Luminaire Accessories and Replacement Parts High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Item Description Catalog Number White Polyester Reflectors — Furnished with stainless steel screws Lighting For Globe Fixtures Lighting: Enclosed and Gasketed — Area — HID For Glass Refractor Fixtures ➋ Standard Dome Standard Dome KR2-ST Deep Dome KR2-DD ➊ 30° Angle KR2-AN Standard Dome CMR-4ST Deep Dome CMR-4DD ➊ 30° Angle CMR-4AN Globe Guard KGU2 G3 Globe/Refractor Guard KRG2 Globe Gasket VPGL-GK G3 Globe/Refractor Gasket KRF-GK 30° Angle Guards Globe Guard Refractor Guard Replacement Globe Gaskets — Silicone Rubber Globe Gaskets Retrofit Pendant Mounting Adapter Permits use of Mercmaster III pendant hood with 3/4” hub on existing V-51 mounting hood. LPAD-1 Mounting Adapter ➊ Dark Skies Compliant. ➋ Fixtures with refractors are not UL Listed when used with reflectors. 962 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Ballast Weights and Fuse Kits High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Ballast Housing Weights Fuse Kits PSMH (Wt. Lbs/Kg ➊➋) — 15.75/7.1 16.75/7.6 17.25/7.8 17.75/8.1 18.5/8.4 19/8.6 Wt. Lbs/Kg ➊ 2.25/1.0 2.5/1.1 3/1.4 4/1.8 3.25/1.5 3.75/1.7 5.25/2.4 3.75/1.7 1/0.5 1/0.5 Standard Dome 2.50/1.1 30° Angle 2.50/1.1 240 2 F5 — 277 347 V 480 120 208 240 277 1 1 2 1 2 2 1 1 2 1 2 2 1 F5 F2 F3 — — — — F2 — — — — — — F2 — F5 F3 F3 F2 F2 F2 F9 F6 F5 F4 347 V 480 120 208 240 277 1 — F2 2 1 2 2 1 — — — — — F2 F8 F5 F5 F3 347 V 1 F3 F3 347 V 120 208 240 277 70 Component and Accessory Weights Item Mounting Hoods Pendant Pendant Cone Ceiling Wall 25° Stanchion Straight Stanchion Refractors, Globes and Guards 8” Glass Refractor/G3 Globe Glass Globe Globe Guard Refractor Guard Reflectors 347 V 480 120 208 Volts 120 208 240 277 50 100 347 V 480 120 208 240 277 150 347 V 480 120 208 240 277 175 200 250 Fuse Kit Catalog Number Fuse Quantity Required 1 2 2 1 1 1 2 2 1 1 2 1 2 2 1 1 2 1 2 HPS F5 F3 F3 F2 F1 F5 F3 F3 F2 F1 F2 F8 F5 F5 F3 F1 F3 F10 F5 PSMH — — — — F1 F4 F3 F3 F2 F2 F1 F6 F4 F3 F3 F2 F2 — — ➊ Weights are approximate. ➋ Add 1 lbs/0.5 kg for HPS fixtures with Hot Restrike. Add 0.25 lbs/0.1 kg for Quartz Emergency Light. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 963 Lighting: Enclosed and Gasketed — Area — HID — 15.25/6.9 16.25/7.4 16.75/7.6 17.25/7.8 18/8.2 18.5/8.4 Lamp Watts Lighting HPS Lamp Watts (Wt. Lbs/Kg ➊➋) Globe Housing with Ballast 50 12.5/5.7 70 15/6.8 100 16/7.3 150 17/7.7 175 — 200 — 250 — Refractor Housing with Ballast 50 13/5.9 70 15.5/7.0 100 16.5/7.5 150 17.5/7.9 175 — 200 — 250 — Fixtures Outside Type (Salt Water) Type 4X IP66 Mercmaster™ III HID 50-250 Watt Luminaire Electrical Specifications High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Lighting: Enclosed and Gasketed — Area — HID Lighting Electrical Specifications Line Type of Starting Voltage Ballast ➊ Amps 50 Watt High Pressure Sodium 120 HX-HPF 0.58 208 HX-HPF 0.35 240 HX-HPF 0.31 277 HX-HPF 0.25 HX-HPF 0.26 347 V 70 Watt High Pressure Sodium 120 HX-HPF 0.90 208 HX-HPF 0.50 240 HX-HPF 0.44 277 HX-HPF 0.35 HX-HPF 0.30 347 V 480 HX-HPF 0.21 100 Watt High Pressure Sodium 120 HX-HPF 1.30 208 HX-HPF 0.76 240 HX-HPF 0.66 277 HX-HPF 0.60 HX-HPF 0.45 347 V 480 HX-HPF 0.33 480 C.W.I. 0.17 600 C.W.I. 0.14 150 Watt High Pressure Sodium ➋ 120 HX-HPF 2.00 208 HX-HPF 1.15 240 HX-HPF 1.00 277 HX-HPF 0.85 HX-HPF 0.52 347 V 480 HX-HPF 0.50 480 C.W.I. 0.25 600 C.W.I. 0.19 70 Watt Pulse Start Metal Halide 120 HX-HPF 0.80 208 HX-HPF 0.50 240 HX-HPF 0.43 277 HX-HPF 0.39 HX-HPF 0.20 347 V 480 HX-HPF 0.26 100 Watt Pulse Start Metal Halide 120 HX-HPF 1.20 208 HX-HPF 0.70 240 HX-HPF 0.61 277 HX-HPF 0.55 HX-HPF 0.40 347 V 480 HX-HPF 0.30 Operating Amps Total Watts 0.58 0.33 0.29 0.25 0.21 64 64 64 64 68 0.82 0.48 0.41 0.36 0.30 0.21 94 94 94 94 94 94 1.15 0.67 0.60 0.52 0.39 0.31 0.30 0.24 130 130 130 130 130 135 130 130 1.70 0.95 0.85 0.72 0.56 0.47 0.42 0.35 188 188 188 188 188 189 190 190 0.85 0.52 0.44 0.39 0.28 0.23 95 95 95 95 88 95 1.15 0.70 0.58 0.50 0.40 0.35 130 130 130 130 129 140 Line Type of Starting Voltage Ballast ➊ Amps 150 Watt Pulse Start Metal Halide 120 HX-HPF 1.75 208 HX-HPF 1.30 240 HX-HPF 0.85 277 HX-HPF 0.77 Super C.W.A. 0.65 347 V 480 Super C.W.A. 0.45 175 Watt Pulse Start Metal Halide 120 Super C.W.A. 0.90 208 Super C.W.A. 0.50 240 Super C.W.A. 0.35 277 Super C.W.A. 0.30 Super C.W.A. 0.25 347 V 480 Super C.W.A. 0.25 Operating Amps Total Watts 1.60 1.00 0.80 0.70 0.55 0.42 188 188 188 188 185 185 1.78 1.08 0.89 0.76 0.65 0.50 199 199 199 199 208 213 175 Watt Metal Halide V 120 C.W.A. 208 C.W.A. 240 C.W.A. 277 C.W.A. 347 C.W.A. 480 C.W.I. 600 C.W.I. 1.30 0.75 0.65 0.55 0.50 0.20 0.16 1.80 1.04 0.90 0.80 0.65 0.45 0.37 210 210 210 210 210 215 215 175 Watt Metal Halide V 120 Super C.W.A. 208 Super C.W.A. 240 Super C.W.A. 277 Super C.W.A. 480 Super C.W.A. 1.30 0.75 0.65 0.55 0.35 1.80 1.10 0.90 0.80 0.45 213 213 213 213 213 250 Watt Metal Halide V 120 Super C.W.A. 208 Super C.W.A. 240 Super C.W.A. 277 Super C.W.A. 480 Super C.W.A. 1.20 0.65 0.60 0.50 0.30 2.60 1.50 1.30 1.12 0.65 298 298 298 298 298 ➊ C.W.A. – Constant Wattage Autotransformer. HX-HPF – High Reactance High Power Factor Autotransformer. Super C.W.A. – Super Constant Wattage Autotransformer. ➋ 150 W HPS units equipped with ballasts to operate 55 volt lamps only. V CSA Certification only. 964 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Dimensions High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Ceiling Pendant (Rigid or Flex) 13.62”/345.9mm 1.17”/ 29.7mm 12.06”/306.3mm 12.06”/306.3mm 1.75”/ 44.5mm Lighting 12.06”/306.3mm Cone 5.59”/ 142.0mm 5.87”/ 149.1mm 5.87”/ 149.1mm 11.00”/279.4mm 11.00”/279.4mm 11.00”/279.4mm Wall 17.06”/433.3mm Globe/Guard/Refractor 1.94”/49.3mm 2.62”/66.5mm 5.87”/ 149.1mm 2.75”/69.9mm 6.00”/152.4mm 9.00”/228.6mm 6.50”/ 165.1mm 8.00”/ 203.2mm 11.00”/279.4mm 17.23”/437.6mm 4.75”/ 9.79”/248.7mm 120.7mm 10.17”/ 258.3mm 1.87”/47.5mm 15.07”/382.8mm 90º Straight Stanchion 4.00”/ 101.6mm 5.87”/ 0.94”/ 149.1mm 23.9mm 1.94”/49.3mm 16.90”/429.3mm 14.90”/ 378.5mm 5.87”/ 149.1mm 11.00”/279.4mm Polymeric Refractor 1.94”/ 49.3mm 14.94”/379.5mm 6.06”/ 153.9mm 11.00”/279.4mm 5.87”/149.1mm 5.50”/ 139.7mm 13.38”/339.9mm 25° Angle Stanchion 6.06”/ 153.9mm 8” Globe/Refractor Body/Guard 13.38”/339.9mm 5.50”/ 139.7mm 14.94”/379.5mm 11.00”/279.4mm 5.50”/ 139.7mm 1.94”/ 49.3mm 5.87”/ 149.1mm 5.87”/ 149.1mm 11.00”/279.4mm 7.75”/196.9mm 5.87”/149.1mm 7.75”/196.9mm 7.25”/184.2mm 7.78”/199.9mm 11.00”/ 11.00”/ 279.4mm 10.75”/ 273.1mm 7.25”/184.2mm 7.78”/199.9mm 12.38”/ 314.5mm 279.4mm 6.69”/ 169.9mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 6.69”/ 169.9mm 965 Lighting: Enclosed and Gasketed — Area — HID 5.87”/ 149.1mm PCD2 Series Factory Sealed Hazardous Location Photocontrol For use in Class I, Division 2, Groups A, B, C, D locations Maintains Class I, Division 2 rating for Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires, Mercmaster LED Class I, Division 2, Groups A, B, C, D NEMA 4X Lighting Applications Materials • Encapsulated photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. • Typical applications include walkways, security areas and any other outdoor lighting application. • For use with Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires. • For remote mounting in FS Boxes. • Encapsulated with epoxy sealing compound • FS: aluminum Certifications and Compliances • UL Standard: 1604 – Hazardous (Classified) Locations • cULus Recognized Lighting: Enclosed and Gasketed — Area — HID Features • Factory sealed design eliminates the need for an explosionproof enclosure. • Can be easily installed in the field. • Solid state design for performance and reliability. • Available for 120, 208, 240, or 277 volts. • 50-400 W HID incandescent or fluorescent, 50/60 Hz. • 1000 VA Voltage/Ampere • Minimum time delay: 15 seconds to eliminate nuisiance tripping. • Provided with (3) 18AWG stranded leads 6”/152.4mm in length. • Will fit through standard 1/2” knockout. Factory-Installed Photocontrol Dimensions Add to fixture catalog after voltage; i.e.: KPWBL1075MTH1. Mercmaster III wall mounting hood with photocontrol installed shown Voltage Range Suffix Designation 120 V, 50/60 Hz H1 208 V, 50/60 Hz H2 240 V, 50/60 Hz H3 277 V, 50/60 Hz H4 1.13” 28.7 mm 1.13” 28.7 mm Photocontrol in FS Cover for Use with FS/FD Box Supplied with two stainless steel screws. For neoprene gasket, order catalog number FS-GKR-1N. Voltage Range Catalog Number 120V, 50/60 Hz FSKA-PC120D2 208-277V, 50/60 Hz FSKA-PC247D2 1.375” 34.9 mm 1.375” 34.9 mm 2.56” 65.0 mm 2.56” 65.0 mm 1.13” 28.7 mm Photocontrol for Field Installation Max. Current Catalog Number 120 V, 50/60 Hz Voltage Range 8.3 Amp PC120D2 208-277 V, 50/60 Hz 3.5 Amp 34.9 mm PC247D2 2.56” 65.0 mm 966 1.375” 0.69” 17.5 mm 1.19” 30.2 mm 1.94” 49.2 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 150 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen). Zone Lumens 50.74 10-20 164.55 20-30 310.47 Total Luminaire Efficiency = 86.1% REPORT NUMBER: KP15LG Lamps: 150 W High Pressure Sodium with Globe only * CIE Type – Semi-Direct Spacing Criteria Plane 30-40 611.05 0-180 2.82 Coefficients of Utilization – Zonal Cavity Method 40-50 961.13 90-270 2.82 Effective Floor Cavity Reflectance 0.20 50-60 1308.18 Diagonal 2.80 60-70 1542.35 70-80 1716.10 80-90 1799.18 % Ceiling Rcc % Walls 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 95 95 95 95 89 89 89 89 77 77 77 67 67 67 57 57 57 53 Lumens % Lamp % Fixture 1 81 74 69 64 75 69 64 59 59 55 51 50 47 44 42 39 37 33 90-100 1802.19 0-30 525.75 3.3 3.8 2 71 62 54 47 65 57 50 44 49 43 38 41 36 32 33 30 27 23 100-110 1676.86 0-40 1136.81 7.1 8.3 3 64 52 44 37 58 48 41 34 41 35 30 34 29 25 28 24 20 17 110-120 1379.11 0-60 3406.12 21.3 24.7 4 57 45 36 30 53 42 34 28 35 29 24 29 24 20 24 19 16 13 120-130 441.46 0-90 8463.75 52.9 61.4 5 52 40 31 24 48 37 29 23 31 24 19 26 20 16 21 16 13 10 130-140 9.61 90-120 4858.16 30.4 35.3 6 48 35 26 20 44 32 25 19 27 21 16 23 17 13 18 14 11 8 140-150 3.33 90-130 5299.62 33.1 38.5 7 44 31 23 17 40 29 21 16 24 18 14 20 15 11 16 12 9 7 150-160 0.74 90-150 5312.56 33.2 38.5 8 40 28 20 15 37 26 19 14 22 16 12 18 13 10 15 11 8 6 160-170 0.00 90-180 5313.30 33.2 38.6 9 38 25 18 13 35 24 17 12 20 14 10 17 12 8 14 10 7 5 170-180 0.00 180-0 13777.05 86.1 100.0 7 13 6 4 Zone 0-10 Lumens Total Luminaire Efficiency = 73.6% 266.98 CIE Type – Direct 10-20 799.41 20-30 1337.05 9 15 11 9 REPORT NUMBER: KP15LST Lamps: 150 W High Pressure Sodium with Standard Dome Reflector * Spacing Criteria Plane 10 35 23 16 11 32 22 15 11 18 13 30-40 1732.06 0-180 1.46 Coefficients of Utilization - Zonal Cavity Method 40-50 2067.60 90-270 1.46 Effective Floor Cavity Reflectance 0.20 50-60 2317.60 Diagonal 1.68 60-70 2210.81 70-80 866.77 80-90 145.09 Lumens % Lamp % Fixture 1 79 76 72 69 77 74 71 68 71 68 66 68 66 64 65 64 62 60 90-100 14.46 0-30 2403.44 15.0 20.4 2 71 65 59 55 69 63 58 54 61 57 53 58 55 52 56 53 50 49 100-110 8.75 0-40 4135.50 25.8 35.1 3 64 56 49 44 62 55 49 44 52 47 43 50 46 42 48 45 41 40 110-120 7.93 0-60 8520.70 53.3 72.3 4 58 49 42 36 57 48 41 36 46 40 36 44 39 35 42 38 35 33 120-130 4.51 0-90 11743.37 73.4 99.7 5 53 43 36 31 52 42 35 30 40 35 30 39 34 30 38 33 29 28 130-140 2.16 90-120 31.14 0.2 0.3 6 49 38 31 26 47 38 31 26 36 30 26 35 30 25 34 29 25 24 140-150 0.48 90-130 35.65 0.2 0.3 7 45 34 27 23 44 34 27 23 33 27 22 31 26 22 30 26 22 20 150-160 0.00 90-150 38.29 0.2 0.3 8 42 31 24 20 40 31 24 20 30 24 20 29 23 19 28 23 19 18 160-170 0.00 90-180 38.29 0.2 0.3 9 39 28 22 18 38 28 22 18 27 21 17 26 21 17 25 21 17 16 170-180 0.00 180-0 11781.65 73.6 100.0 10 36 26 20 16 35 26 20 16 25 19 16 24 19 16 23 19 15 14 % Ceiling Rcc % Walls Zonal Lumen Summary Zone 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 88 88 88 88 86 86 86 86 82 82 82 78 78 78 75 75 75 73 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 967 Lighting: Enclosed and Gasketed — Area — HID Zonal Lumen Summary Zone 80 Lighting 0-10 For candlepower values of fixtures with other HPS lamps, use the following multipliers: for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95. Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 150 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen). Lighting: Enclosed and Gasketed — Area — HID Lighting Zone Lumens Total Luminaire Efficiency = 73.1% 0-10 222.62 CIE Type - Direct 10-20 664.6 20-30 1084.32 30-40 1536.55 For candlepower values of fixtures with other HPS lamps, use the following multipliers: for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95. REPORT NUMBER: KP15LAN Lamps: 150 W High Pressure Sodium with 30° Angle Dome Reflector * Spacing Criteria Plane 0-180 Coefficients of Utilization - Zonal Cavity Method 2.06 40-50 1771.90 90-270 1.58 50-60 1771.51 Diagonal 1.62 60-70 1668.93 70-80 1422.36 80-90 994.54 90-100 432.23 Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zonal Lumen Summary 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 86 86 86 86 84 84 84 84 79 79 79 75 75 75 71 71 71 70 Lumens % Lamp % Fixture 1 76 71 67 63 73 69 65 62 65 62 59 62 59 57 58 56 54 52 0-30 1971.54 12.3 16.9 2 68 60 54 49 65 58 53 48 55 50 46 52 48 45 49 46 43 41 100-110 104.58 0-40 3508.09 21.9 30.0 3 61 52 45 39 59 50 44 39 48 42 37 45 40 36 43 39 35 33 110-120 20.99 0-60 7051.50 44.1 60.3 4 55 45 38 32 53 44 37 32 42 36 31 39 34 30 37 33 29 27 120-130 1.21 0-90 11137.33 69.6 95.2 5 50 40 33 27 49 39 32 27 37 31 26 35 30 25 33 29 25 23 130-140 0.04 90-120 557.80 3.5 4.8 6 46 36 28 23 45 35 28 23 33 27 22 31 26 22 30 25 21 20 140-150 0.00 90-130 559.01 3.5 4.8 7 43 32 25 20 41 31 25 20 30 24 19 28 23 19 27 22 19 17 150-160 0.00 90-150 559.04 3.5 4.8 8 40 29 22 18 38 28 22 17 27 21 17 26 21 17 25 20 16 15 160-170 0.00 90-180 559.04 3.5 4.8 9 37 26 20 16 36 26 20 16 25 19 15 24 19 15 23 18 15 13 170-180 0.00 180-0 11696.38 73.1 100.0 10 35 24 18 14 33 24 18 14 23 17 14 22 17 13 21 16 13 12 Zone Lumens Zone 80 Total Luminaire Efficiency = 81.1% REPORT NUMBER: KP15LJR5 Lamps: 150 W High Pressure Sodium with 8” Prismatic Glass Refracter - NEMA Type V * CIE Type - Semi- Direct 0-10 72.83 10-20 222.26 20-30 380.73 30-40 621.11 0-180 1.98 Coefficients of Utilization - Zonal Cavity Method 40-50 852.53 90-270 1.98 Effective Floor Cavity Reflectance 0.20 50-60 1765.29 Diagonal 3.40 60-70 3192.58 70-80 2366.61 80-90 1230.65 90-100 Spacing Criteria Plane % Ceiling Rcc % Walls Zonal Lumen Summary Zone 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 93 93 93 93 89 89 89 89 82 82 82 76 76 76 70 70 70 67 Lumens % Lamp % Fixture 1 80 73 68 63 76 70 65 61 64 60 56 58 55 52 53 50 48 45 450.14 0-30 675.83 4.2 5.2 2 69 59 51 45 65 56 49 43 51 45 40 46 41 37 41 37 34 31 100-110 712.41 0-40 1296.93 8.1 10.0 3 61 49 40 33 57 47 38 32 42 35 29 38 32 27 34 29 25 22 110-120 499.15 0-60 3914.76 24.5 30.2 4 54 42 32 25 51 40 31 24 35 28 22 32 26 21 28 23 19 16 120-130 323.44 0-90 10704.60 66.9 82.5 5 49 36 27 20 46 34 26 19 31 23 18 27 21 16 24 19 15 12 130-140 185.00 90-120 1661.70 10.4 12.8 6 45 32 23 16 42 30 22 16 27 20 14 24 18 13 21 16 12 10 140-150 81.31 90-130 1985.14 12.4 15.3 7 41 28 20 14 38 27 19 13 24 17 12 21 15 11 19 14 10 8 150-160 21.08 90-150 2251.45 14.1 15.3 8 38 25 17 12 36 24 16 11 22 15 10 19 14 6 160-170 2.81 90-180 2275.34 14.2 17.5 170-180 0.00 180-0 12979.94 81.1 100.0 968 9 35 23 15 10 33 22 15 10 20 13 10 33 21 14 9 31 20 13 9 18 12 9 17 12 8 9 18 12 8 16 11 7 5 8 16 11 7 15 10 6 5 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 175 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with a 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). Zone Lumens 57.98 10-20 217.30 20-30 372.71 Total Luminaire Efficiency = 75.4% REPORT NUMBER: KP17PG Lamps: 175 W Pulse Start Metal Halide with Globe only * CIE Type - General Diffuse Lighting 0-10 For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 100 W (8,500 lumen) PSMH lamp – 0.49; for a 70 W (6,200 lumen) PSMH lamp – 0.36; for a 200 W (21,000 lumen) PSMH lamp – 1.2. For candlepower values of fixture with guard, multiply by 0.95. 30-40 696.29 Coefficients of Utilization - Zonal Cavity Method 40-50 1009.65 Effective Floor Cavity Reflectance 0.20 50-60 1226.57 % Ceiling Rcc 60-70 1473.76 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 70-80 1757.30 80-90 1902.34 Lumens 70 50 30 10 0 0 93 93 93 93 87 87 87 87 75 75 75 64 64 64 54 54 54 50 % Lamp % Fixture 1 79 73 68 63 73 68 63 59 58 54 50 48 45 43 40 37 35 31 90-100 1946.09 0-30 647.99 3.7 4.3 2 70 61 54 47 65 57 50 44 48 42 38 39 35 32 32 29 26 22 100-110 1829.51 0-40 1344.28 7.7 9.0 3 63 52 44 37 58 48 41 35 40 34 29 33 28 24 27 23 20 16 110-120 1657.20 0-60 3580.49 20.5 24.0 4 57 45 37 30 52 42 34 28 35 29 24 29 24 20 23 19 16 12 120-130 750.27 0-90 8713.89 49.8 58.4 5 52 40 31 25 47 37 29 23 31 24 20 25 20 16 20 16 13 10 130-140 14.15 90-120 5432.80 31.0 36.4 6 47 35 27 21 43 32 25 19 27 21 17 22 17 14 18 14 11 8 140-150 4.47 90-130 6183.06 35.3 41.4 7 44 31 23 18 40 29 22 17 24 18 14 20 15 12 16 12 9 7 150-160 0.52 90-150 6201.69 35.4 41.6 8 40 28 21 15 37 26 19 14 22 16 12 18 14 10 15 11 8 6 160-170 1.35 90-180 6203.74 35.4 41.6 9 37 26 18 13 34 24 17 13 20 15 11 17 12 9 13 10 7 5 170-180 0.18 180-0 14917.63 85.2 100.0 8 12 6 4 Zone 0-10 Lumens Total Luminaire Efficiency = 72.3% 285.95 CIE Type - Direct 10-20 876.46 20-30 1472.88 9 15 11 9 REPORT NUMBER: KP17PST Lamps: 175 W Pulse Start Metal Halide with Standard Dome Reflector * Spacing Criteria Plane 10 35 23 16 12 32 22 15 11 18 13 30-40 1924.39 0-180 1.50 Coefficients of Utilization - Zonal Cavity Method 40-50 2213.42 90-270 1.50 Effective Floor Cavity Reflectance 0.20 50-60 2305.55 Diagonal 1.66 60-70 2256.32 70-80 1115.75 80-90 198.05 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone Lumens 0 86 86 86 86 84 84 84 84 80 80 80 77 77 77 74 74 74 72 % Lamp % Fixture 1 78 74 71 68 76 72 69 67 69 67 65 67 64 63 64 62 61 59 90-100 3.56 0-30 2635.28 15.1 20.8 2 70 63 58 54 68 62 57 53 59 55 52 57 54 50 55 52 49 48 100-110 0.00 0-40 4559.67 26.1 36.0 3 63 55 48 43 61 54 48 43 51 46 42 49 45 41 47 44 41 39 110-120 0.00 0-60 9078.64 51.9 71.8 4 57 48 41 36 56 47 40 35 45 39 35 43 38 34 42 37 34 32 120-130 0.00 0-90 12648.77 72.3 100.0 5 52 42 35 30 51 41 35 30 40 34 30 38 33 29 37 32 29 27 130-140 0.00 90-120 3.56 0.00 0.00 6 48 38 31 26 47 37 30 26 36 30 25 34 29 25 33 29 25 23 140-150 0.00 90-130 3.56 0.00 0.00 7 44 34 27 22 43 33 27 22 32 26 22 31 26 22 30 25 22 20 150-160 0.00 90-150 3.56 0.00 0.00 8 41 31 24 20 40 30 24 20 29 24 19 28 23 19 27 23 19 18 160-170 0.00 90-180 3.56 0.00 0.00 9 38 28 22 18 37 28 22 17 27 21 17 26 21 17 25 21 17 16 170-180 0.00 180-0 12652.33 72.3 100.0 10 36 26 20 16 35 25 20 16 25 19 16 24 19 15 23 19 15 14 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 969 Lighting: Enclosed and Gasketed — Area — HID Zonal Lumen Summary Zone 80 Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 175 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with a 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). Lighting: Enclosed and Gasketed — Area — HID Lighting Zone For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 100 W (8,500 lumen) PSMH lamp – 0.49; for 70 W (6,200 lumen) PSMH lamp – 0.36; for a 200 W (21,000 lumen) PSMH lamp – 1.2. For candlepower values of fixture with guard, multiply by 0.95. Lumens Total Luminaire Efficiency = 67.1% 0-10 240.21 CIE Type - Direct 10-20 750.99 20-30 1195.39 30-40 1662.85 0-180 1.96 40-50 1830.67 90-270 1.70 50-60 1740.13 Diagonal 1.56 60-70 1571.75 70-80 1324.18 80-90 900.65 90-100 367.96 0-30 2186.59 12.5 18.6 2 63 56 51 46 61 55 49 45 52 47 44 49 45 42 46 43 41 39 100-110 107.38 0-40 3849.44 22.0 32.8 3 57 48 42 37 55 47 41 37 45 40 36 42 38 35 40 37 34 32 110-120 27.79 0-60 7420.24 42.4 63.2 4 51 42 36 31 50 41 35 30 39 34 30 37 33 29 35 31 28 26 120-130 5.54 0-90 11216.82 64.1 95.6 5 47 38 31 26 45 37 30 26 35 29 25 33 28 25 32 27 24 22 130-140 4.20 90-120 503.12 2.9 4.3 6 43 34 27 22 42 33 27 22 31 26 22 30 25 21 28 24 21 19 140-150 4.42 90-130 508.66 2.9 4.3 7 40 30 24 20 39 30 24 19 28 23 19 27 22 19 26 22 18 17 150-160 2.00 90-150 517.28 3.0 4.4 8 37 27 21 17 36 27 21 17 26 20 17 25 20 16 24 19 16 15 160-170 1.70 90-180 521.31 3.0 4.4 9 35 25 19 15 33 25 19 15 24 18 15 23 18 15 22 18 14 13 170-180 0.33 180-0 11738.13 67.1 100.0 10 32 23 17 14 31 23 17 14 22 17 13 21 16 13 20 16 13 12 Zone Lumens 0-10 22.77 10-20 171.20 20-30 325.41 REPORT NUMBER: KP17PAN Lamps: 175 W Pulse Start Metal Halide with 30° Angle Dome Reflector * Spacing Criteria Plane Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone Lumens 0 79 79 79 79 77 77 77 77 73 73 73 69 69 69 66 66 66 64 % Lamp % Fixture 1 70 66 62 59 68 64 61 58 60 58 55 57 55 53 54 52 51 49 Total Luminaire Efficiency = 81.1% REPORT NUMBER: KP17PJR5 Lamps: 175 W Pulse Start Metal Halide with 8” Prismatic Glass Refracter - NEMA Type V * CIE Type - Semi-Direct Spacing Criteria Plane 30-40 531.35 0-180 1.66 Coefficients of Utilization - Zonal Cavity Method 40-50 1173.62 90-270 1.64 Effective Floor Cavity Reflectance 0.20 50-60 1165.11 Diagonal 1.92 60-70 3171.29 70-80 3719.35 80-90 1751.05 90-100 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone Lumens 0 94 94 94 94 90 90 90 90 83 83 83 77 77 77 71 71 71 69 % Lamp % Fixture 1 78 71 65 60 74 68 62 57 62 57 53 57 53 49 51 48 46 43 523.23 0-30 519.38 3.0 3.7 2 67 57 48 41 63 54 46 39 49 42 36 44 38 33 39 35 31 28 100-110 716.53 0-40 1050.73 6.0 7.4 3 59 46 37 29 55 44 35 28 40 32 26 35 29 24 32 26 22 19 110-120 431.18 0-60 3389.46 19.4 23.9 4 52 39 30 22 49 37 28 21 33 26 20 30 23 18 26 21 16 14 120-130 265.20 0-90 12031.16 68.7 84.8 5 47 34 24 17 45 32 23 17 29 21 15 26 19 14 23 17 13 10 130-140 142.69 90-120 1670.94 9.5 11.8 6 43 30 21 14 41 28 20 14 25 18 12 23 16 11 20 15 10 8 140-150 57.09 90-130 1936.15 11.1 13.7 7 40 27 18 12 37 23 17 11 23 16 10 20 14 9 18 13 8 6 150-160 13.48 90-150 2135.93 12.2 15.1 8 37 24 16 10 35 23 15 10 20 14 8 16 11 7 5 9 18 12 160-170 2.44 90-180 2152.72 12.3 15.2 9 34 22 14 9 32 21 13 8 19 12 8 17 11 7 15 10 6 4 170-180 0.88 180-0 14183.88 81.1 100.0 10 32 20 12 8 30 19 12 7 17 11 7 16 10 6 14 5 4 970 9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 175 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with a 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). Candela 657 668 784 Lumens TOTAL LUMINAIRE EFFICIENCY = 70.8% CIE Type – Semi-Direct Spacing Criteria: 1.7 65 224 451 1194 705 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180 871 1267 1309 1430 1528 1537 1552 1452 1339 68 19 13 7 1 2 7 711 1142 1303 1509 1661 Degree 0 5 15 Candela 2785 2797 2902 Lumens 25 2931 1358 35 2979 1821 45 55 65 75 85 2388 2393 2044 664 150 1874 2145 2034 856 183 90 24 95 105 115 125 135 145 155 165 175 180 5 16 91 5 7 8 2 2 2 11 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 740 4.2 6.0 0-40 1445 8.3 11.7 0-60 3297 18.8 26.6 0-90 7770 44.4 62.7 90-120 4444 25.4 35.9 90-130 4586 26.2 37.0 90-150 4613 26.4 37.2 90-180 4617 26.4 37.3 0-180 12387 70.8 100.0 1680 1532 1232 143 16 11 3 1 0 TOTAL LUMINAIRE EFFICIENCY = 65.6% CIE Type – Direct Spacing Criteria: 1.5 269 823 90° 950 60° ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 2450 14.0 21.3 0-40 4271 24.4 37.2 0-60 8290 47.4 72.2 0-90 11363 64.9 99.0 90-120 101 0.6 0.9 90-130 110 0.6 1.0 90-150 115 0.7 1.0 90-180 118 0.7 1.0 0-180 11481 65.6 100.0 11 17 73 9 3 2 2 0 1 45.0 2333 2467 2753 2891 3100 2719 2939 2801 2621 90.0 2333 2321 2337 2480 2544 1993 1791 776 392 135.0 2333 2205 2160 2242 2027 832 421 74 3 85 2729 967 117 5 0 709 662 461 175 8 11 3 5 3 3 5 6 11 3 11 8 13 3 11 5 8 3 6 5 11 19 29 13 3 5 5 5 3 6 5 16 247 21 109 90 56 11 2 0 1 0 4 0 2 0 1 0 0 6 1601 790 413 117 5 0 5 0 5 0 6 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 70 50 30 10 70 50 30 10 50 30 10 50 30 10 78 73 73 73 73 64 64 64 56 56 56 53 62 57 53 49 49 46 43 42 39 37 40 54 48 42 37 41 36 32 34 31 27 31 49 40 34 29 34 29 25 29 25 21 25 44 35 29 24 30 25 20 25 21 17 21 40 31 24 20 26 21 17 22 18 14 18 37 27 21 16 23 18 14 20 15 12 15 34 25 18 14 21 16 12 18 13 10 13 31 22 16 12 19 14 11 16 12 9 11 29 20 15 11 17 13 9 15 11 8 10 27 18 13 9 16 11 8 14 10 7 50 48 35 28 24 21 18 16 15 13 12 11 10 30 48 33 26 21 17 15 13 11 10 9 8 10 48 31 23 18 14 12 10 9 7 7 6 0 0 44 28 20 15 12 9 8 7 6 5 4 REPORT NUMBER: KPB175PG3_ST Lamps: 175 W Pulse Start Metal Halide ED28 Mogul Base with G3 Globe and Standard Dome Reflector 180.0 2333 2141 2099 2120 1367 546 154 0 0 45° 2850 0° 15° 30° Plane 0° 90° 180° 0 0 65 53 3 4 5 6 7 8 9 10 58 52 48 44 40 37 35 33 50 44 39 35 31 28 26 24 44 38 32 28 25 22 20 18 40 33 28 24 21 18 16 15 56 51 46 42 39 36 34 32 49 43 38 34 30 28 25 23 44 37 32 28 25 22 20 18 39 33 28 24 21 18 16 15 47 41 36 33 29 27 24 23 42 36 31 27 24 22 19 18 39 32 27 23 20 18 16 14 45 39 35 31 28 26 24 22 41 35 30 27 24 21 19 17 38 32 27 23 20 18 16 14 43 38 34 30 27 25 23 21 40 34 30 26 23 21 19 17 37 31 26 23 20 18 16 14 35 29 25 21 19 16 15 13 REPORT NUMBER: KPB175PG3_AN Lamps: 175 W Pulse Start Metal Halide ED28 Mogul Base with G3 Globe and 30° Angle Dome Reflector Flux CIE Type – Direct 223 692 1170 1512 1427 1533 1349 1140 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 RC 80 70 50 30 10 RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 78 78 78 78 76 76 76 76 73 73 73 69 69 69 66 66 66 1 71 67 64 62 69 66 63 61 63 61 59 60 58 57 58 56 55 2 64 58 53 49 62 57 52 48 54 50 47 52 49 46 50 47 45 43 1500 TOTAL LUMINAIRE EFFICIENCY = 58.2% 0.0 2333 2491 2904 3010 3471 2978 3296 3153 3175 90 95 105 115 125 135 145 155 165 175 180 70 78 67 59 53 48 43 40 37 34 32 29 80 50 30 78 78 61 57 51 45 44 37 38 31 33 26 29 23 26 20 24 17 22 16 20 14 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD 75° Candela Distribution 0 5 15 25 35 45 55 65 75 RC RW 0 1 2 3 4 5 6 7 8 9 10 Spacing Criteria 1.8 1.5 1.1 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 RC 80 70 50 30 RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 0 69 69 69 69 67 67 67 67 63 63 63 60 60 60 57 1 61 57 54 51 59 56 53 50 53 50 48 50 48 46 48 10 0 30 10 0 57 57 56 46 45 43 2 55 49 44 40 53 48 43 40 45 42 38 43 40 37 41 38 36 34 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 2085 11.9 20.5 0-40 3597 20.6 35.3 0-60 6557 37.5 64.4 0-90 9755 55.7 95.8 90-120 412 2.4 4.1 90-130 415 2.4 4.1 90-150 420 2.4 4.1 90-180 423 2.4 4.2 0-180 10178 58.2 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 0-deg 90-deg 180-deg 3 4 5 6 7 8 9 10 49 45 41 38 35 33 30 28 42 37 33 30 27 24 22 20 37 32 27 24 21 19 17 16 33 27 23 20 18 16 14 12 48 43 40 37 34 32 29 28 41 36 32 29 26 24 22 20 36 31 27 24 21 19 17 15 32 27 23 20 17 15 14 12 39 34 31 28 25 23 21 19 35 30 26 23 20 18 17 15 31 26 22 19 17 15 14 12 37 33 29 26 24 22 20 19 34 29 25 22 20 18 16 15 31 26 22 19 17 15 13 12 35 31 28 25 23 21 19 18 32 28 24 22 19 17 16 14 30 25 21 19 16 15 13 12 28 24 20 17 15 13 12 11 971 Lighting: Enclosed and Gasketed — Area — HID 966 35 Lighting 25 REPORT NUMBER: KPB175PG3 Lamps: 175 W Pulse Start Metal Halide ED28 Mogul Base with G3 Globe only Legend Degree 0 5 15 For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 100 W (8,500 lumen) PSMH lamp – 0.49; for a 70 W (6,200 lumen) PSMH lamp – 0.36; for a 200 W (21,000 lumen) PSMH lamp – 1.2. For candlepower values of fixture with guard, multiply by 0.95. Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 100 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Degree 0 5 Candela 269 267 Lumens 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180 407 571 748 451 848 915 976 1021 1027 1019 953 791 54 13 13 4 0 0 1 117 267 442 380 735 908 1033 1113 Degree Candela 0 5 1466 1473 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180 1607 1675 1757 1316 1502 1377 465 92 16 3 6 40 5 3 3 2 0 1 1 For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 70 W (6,400 lumen) HPS lamp – 0.68; for 50 W (4,000 lumen) HPS lamp – 0.43; for candlepower values of fixture with guard, multiply by 0.95. REPORT NUMBER: KPB100LG3 Lamps: 100 W High Pressure Sodium C100S54 ED23 - 1/2 Mogul Base with G3 Globe only TOTAL LUMINAIRE EFFICIENCY = 84.1% CIE Type – Semi-Direct Spacing Criteria: 3.1 27 RC RW 0 1 2 3 4 5 6 7 8 9 10 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 410 4.3 5.1 0-40 852 9.0 10.7 0-60 1967 20.7 24.6 0-90 5021 52.9 62.9 90-120 2845 29.9 35.6 90-130 2948 31.0 36.9 90-150 2965 31.2 37.1 90-180 2967 31.2 37.1 0-180 7988 84.1 100.0 1109 1002 734 103 9 8 2 0 0 Lumens 142 456 775 1071 1047 1316 1362 589 111 Candela Distribution Plane 0° 90° Criteria 1.9 1.7 35 45 55 65 75 180° 1.3 1923 1715 1981 1923 1879 85 1371 90 95 105 115 125 135 145 155 165 175 180 972 680 416 191 40 1 1 0 0 0 2 2 1830 1593 1256 1020 917 1564 1163 599 361 848 1862 1100 287 122 953 1751 869 104 0 869 1272 298 9 0 711 828 140 1 0 424 422 259 93 18 3 2 1 1 1 2 2 89 47 4 51 3 3 2 2 1 2 2 2 4 7 54 3 2 0 1 1 1 2 1 4 144 6 59 92 31 1 2 1 1 0 1 0 1 0 0 0 0 2 0 0 53 32 23 17 13 10 8 7 6 5 5 10 74 60 49 40 33 28 24 21 19 17 15 0 0 72 59 47 38 32 26 23 20 17 15 14 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 RC 80 70 50 30 10 RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 77 77 77 77 75 75 75 75 71 71 71 67 67 67 64 64 64 1 68 64 61 57 66 62 59 56 59 56 54 56 54 52 53 51 50 0 0 62 48 70 93 79 69 62 56 51 47 43 40 37 34 70 87 78 70 63 57 52 48 44 41 38 36 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 80 70 50 30 10 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 87 87 87 85 85 85 85 81 81 81 77 77 77 74 74 74 71 68 76 73 70 67 70 67 65 67 64 62 64 62 64 58 53 68 62 57 53 59 55 51 57 53 50 54 52 55 48 43 61 54 47 43 51 46 42 49 45 41 47 43 48 41 35 55 47 40 35 45 39 34 43 38 34 41 37 42 35 30 51 41 34 29 39 34 29 38 33 29 36 32 37 30 25 46 37 30 25 35 29 25 34 29 25 33 28 34 27 22 43 33 26 22 32 26 22 31 25 21 29 25 30 24 19 40 30 24 19 29 23 19 28 23 19 27 22 23 21 17 37 27 21 17 26 21 17 25 20 17 25 20 25 19 15 35 25 19 15 24 19 15 23 19 15 23 18 REPORT NUMBER: KPB100LG3_AN Lamps: 100 W High Pressure Sodium C100S54 ED23 - 1/2 Mogul Base with G3 Globe and 30° Angle Reflector TOTAL LUMINAIRE EFFICIENCY = 65.0% 0.0 45.0 90.0 135.0 180.0 Flux CIE Type – Direct 0 1270 1270 1270 1270 1270 Spacing 5 1317 1302 1271 1227 1211 122 15 1554 1471 1384 1341 1298 398 25 1779 1680 1528 1353 1246 694 10 57 36 26 20 16 13 11 9 8 7 6 RC RW 0 1 2 3 4 5 6 7 8 9 10 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 1373 14.5 19.8 0-40 2445 25.7 35.3 0-60 4807 50.6 69.4 0-90 6869 72.3 99.2 90-120 45 0.5 0.6 90-130 53 0.6 0.8 90-150 56 0.6 0.8 90-180 58 0.6 0.8 0-180 6927 72.9 100.0 5 6 33 8 2 1 1 1 0 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 80 70 50 30 10 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 93 93 93 87 87 87 87 76 76 76 66 66 66 57 57 72 67 62 73 67 62 58 58 54 50 49 46 43 41 39 60 52 46 64 56 49 43 48 42 37 40 36 32 33 30 51 43 36 57 47 40 34 40 34 29 34 29 24 28 24 44 36 29 51 41 33 27 35 28 23 29 24 20 24 19 39 30 24 47 36 28 22 30 24 19 25 20 16 21 17 34 26 20 43 32 24 19 27 21 16 23 17 13 19 14 31 23 17 40 28 21 16 24 18 14 20 15 13 17 13 28 20 15 37 26 19 14 22 16 12 19 14 10 15 11 25 18 13 34 23 17 12 20 14 10 17 12 9 14 10 23 16 11 32 21 15 11 18 13 9 16 11 8 13 9 REPORT NUMBER: KPB100LG3_ST Lamps: 100 W High Pressure Sodium C100S54 ED23 - 1/2 Mogul Base with G3 Globe and Standard Dome Reflector TOTAL LUMINAIRE EFFICIENCY = 72.9% CIE Type – Direct Spacing Criteria: 1.6 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD 2 61 55 49 45 59 53 48 44 50 46 43 48 44 41 45 42 40 38 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 1213 12.8 19.7 0-40 2131 22.4 34.5 0-60 3932 41.4 63.7 0-90 5936 62.5 96.1 90-120 234 2.5 3.8 90-130 236 2.5 3.8 90-150 238 2.5 3.9 90-180 239 2.5 3.9 0-180 6175 65.0 100.0 Legend Lighting: Enclosed and Gasketed — Area — HID Lighting * Photometric data is based on fixtures with a 100-watt clear High Pressure Sodium lamp (9,400 lumen). 0-deg 90-deg 180-deg 3 4 5 6 7 8 9 10 55 50 46 42 39 36 34 32 47 41 37 33 30 27 25 23 41 35 30 26 23 21 19 17 36 30 25 22 19 17 15 14 53 48 44 41 38 35 33 31 46 40 36 32 29 26 24 22 40 34 30 26 23 21 19 17 36 30 25 22 19 17 15 13 44 38 34 30 28 25 23 21 39 33 29 25 22 20 18 17 35 29 25 21 19 16 15 13 41 36 32 29 26 24 22 20 37 32 28 24 22 20 18 16 34 28 24 21 18 16 14 13 39 35 31 28 25 23 21 20 36 31 27 24 21 19 17 16 33 28 24 20 18 16 14 13 31 26 22 19 17 15 13 12 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 150 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with a 150-watt clear High Pressure Sodium lamp (16,000 lumen). Lumens 15 25 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180 703 938 1107 892 1420 1542 1629 1675 1665 1643 1515 1072 51 20 19 6 1 0 2 202 442 672 710 1253 1529 1723 1824 Degree Candela 46 1788 1599 1042 115 16 12 4 0 0 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 689 4.3 5.3 0-40 1361 8.5 10.5 0-60 3324 20.8 25.6 0-90 8400 52.5 64.7 90-120 4429 27.7 34.1 90-130 4544 28.4 35.0 90-150 4572 28.6 35.2 90-180 4576 28.6 35.3 0-180 12976 81.1 100.0 Lumens TOTAL LUMINAIRE EFFICIENCY = 69.6% 0 5 2403 2391 15 2624 744 25 2678 1247 REPORT NUMBER: KPB150LG3 Lamps: 150 W High Pressure Sodium C100S54 ED23 - 1/2 Mogul Base with G3 Globe only TOTAL LUMINAIRE EFFICIENCY = 81.1% CIE Type – Semi-Direct Spacing Criteria: 3.0 RC RW 0 1 2 3 4 5 6 7 8 9 10 10 30 56 38 29 23 19 16 14 12 11 10 9 10 56 36 26 20 16 13 11 9 8 7 6 0 0 53 32 23 17 13 10 8 7 6 5 4 REPORT NUMBER: KPB150LG3_ST Lamps: 150 W High Pressure Sodium C100S54 ED23 - 1/2 Mogul Base with G3 Globe and Standard Dome Reflector CIE Type – Direct Spacing Criteria: 1.6 230 70 90 76 67 60 54 49 45 41 38 36 33 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 80 70 50 30 50 30 10 70 50 30 10 50 30 10 50 30 10 50 90 90 90 84 84 84 84 74 74 74 65 65 65 56 70 65 60 71 65 60 56 56 53 49 48 45 42 41 58 51 44 62 54 47 42 46 41 36 39 35 31 33 49 41 34 55 46 38 32 39 33 28 33 28 24 27 43 34 29 50 40 32 26 34 27 22 28 23 19 23 37 29 23 45 35 27 21 30 23 18 25 20 16 21 33 25 19 42 31 23 18 26 20 15 22 17 13 18 30 22 16 38 27 20 15 24 18 13 20 15 11 16 27 19 14 35 25 18 13 21 16 11 18 13 10 15 24 17 12 33 23 16 12 19 14 10 17 12 8 14 22 15 11 31 21 14 10 18 12 9 15 11 7 13 35 2705 1673 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD 45 55 65 75 85 2250 2444 2246 655 147 1754 2161 2192 851 174 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 RC 80 70 50 30 10 0 RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 83 83 83 83 81 81 81 81 77 77 77 74 74 74 70 70 70 69 1 75 71 68 65 73 70 67 64 66 64 62 64 62 60 61 59 58 56 90 26 95 105 115 125 135 145 155 165 175 180 6 11 73 7 6 4 4 2 2 1 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP 0-30 2221 13.9 0-40 3895 24.3 0-60 7809 48.8 0-90 11027 68.9 90-120 92 0.6 90-130 104 0.6 90-150 109 0.7 90-180 112 0.7 0-180 11139 69.6 8 13 71 12 3 2 2 1 0 2 67 61 56 51 65 60 55 51 57 53 49 54 51 48 52 49 47 45 %FIXT. 19.9 35.0 70.1 99.0 0.8 0.9 1.0 1.0 100.0 3 4 5 6 7 8 9 10 Candela Distribution TOTAL LUMINAIRE EFFICIENCY = 61.0% 0.0 45.0 90.0 135.0 180.0 Flux CIE Type – Direct 0 1964 1964 1964 1964 1964 Spacing 25 2755 2587 2288 2095 1853 1081 35 45 55 65 75 85 90 95 105 115 125 135 145 155 165 175 180 2924 2790 3166 3188 3145 2533 2763 2552 2937 2913 2547 927 1490 640 765 449 380 163 114 4 2 5 2 6 0 2 2 4 4 3 0 2 2 2 2415 1885 1276 1416 2015 780 518 1368 1945 410 157 1520 777 77 0 1380 408 1 2 1118 117 0 2 663 14 5 6 6 7 7 6 6 5 3 2 5 8 11 18 8 8 4 6 4 3 2 9 11 239 15 106 63 44 7 5 6 4 2 3 4 2 2 1 2 0 2 Plane 0° Criteria 2.0 90° 1.7 180° 1.3 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 1886 11.8 19.3 0-40 3302 20.6 33.8 0-60 6190 38.7 63.5 0-90 9351 58.4 95.9 90-120 389 2.4 4.0 90-130 395 2.5 4.0 90-150 401 2.5 4.1 90-180 404 2.5 4.1 0-180 9754 61.0 100.0 52 46 40 36 32 29 27 24 46 39 33 29 26 23 20 19 41 34 28 24 21 18 16 15 59 53 48 44 41 38 35 33 51 45 39 35 32 29 26 24 46 38 33 29 25 23 20 18 41 34 28 24 21 18 16 15 49 43 38 34 30 28 25 23 44 37 32 28 25 22 20 18 40 33 28 24 21 18 16 14 47 41 36 32 29 27 24 22 43 36 31 27 24 22 20 18 39 33 27 24 20 18 16 14 45 39 35 31 28 26 24 22 41 35 31 27 24 22 19 17 38 32 27 23 20 18 16 14 37 30 25 22 19 16 15 13 REPORT NUMBER: KPB150LG3_AN Lamps: 150 W High Pressure Sodium C100S54 ED23 - 1/2 Mogul Base with G3 Globe and 30° Angle Reflector COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD Legend 5 2035 2007 1941 1871 1838 187 15 2375 2307 2140 2047 2037 619 61 55 50 46 42 39 36 34 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 0-deg 90-deg 180-deg RC RW 0 1 2 3 4 5 6 7 8 9 10 70 72 64 57 80 50 30 72 72 60 57 51 46 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 70 50 30 10 70 50 30 10 50 30 10 50 30 10 72 70 70 70 70 66 66 66 63 63 63 54 62 58 55 53 55 53 50 52 50 48 42 55 50 45 41 47 43 40 45 41 39 50 60 50 42 10 30 60 48 40 0 10 0 60 58 47 45 37 36 52 47 43 39 36 34 32 30 44 39 34 31 28 25 23 21 34 28 24 20 18 16 14 13 37 32 29 26 24 22 20 18 33 29 25 22 20 18 16 15 31 26 22 19 17 15 13 12 38 33 28 25 22 20 18 16 50 45 41 38 35 33 30 29 43 38 33 30 27 24 22 21 38 32 28 24 22 19 17 16 33 28 24 20 18 16 14 12 41 36 32 28 26 23 21 20 36 31 27 24 21 19 17 15 33 27 23 20 17 15 14 12 39 34 30 27 25 22 21 19 35 30 26 23 20 18 16 15 32 26 22 19 17 15 13 12 29 24 21 18 15 14 12 11 973 Lighting: Enclosed and Gasketed — Area — HID Candela 488 459 Lighting Degree 0 5 For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 70 W (6,400 lumen) HPS lamp – 0.40; for a 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95. Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 250 W PSMH Lighting: Enclosed and Gasketed — Area — HID Lighting * Photometric data is based on fixtures with a 250-watt clear Pulse Start Metal Halide lamp (23,000 lumen). Zone 0-10 10-20 Lumens 307.05 986.27 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 1556.63 2215.28 2539.71 2525.66 2313.2 1992.57 1470.76 689.06 177.72 46 10.39 6.24 5.71 3.95 2.26 .8 Zone Lumens 0-10 382.83 10-20 1200.76 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 1987.77 2662.58 3136.15 3436.26 3412.32 1660.08 278.17 3.43 0 0 0 0 0 0 0 0 Candela Distribution For candlepower values of fixtures with other PSMH lamps, (21,000 lumen) PSMH lamp – 0.913. For candlepower values of fixture with guard, multiply by 0.95. TOTAL LUMINAIRE EFFICIENCY = 67.4% CIE Type – Direct Spacing Criteria: 2.16 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 2849.95 11.4 16.9 0-40 5065.22 20.3 30.1 0-60 10130.59 40.5 60.1 0-90 15907 63.6 94.4 90-120 912.78 3.7 5.4 90-130 923.17 3.7 5.5 90-150 935.11 3.7 5.5 90-180 942.12 3.8 5.6 0-180 16849.24 67.4 100.0 TOTAL LUMINAIRE EFFICIENCY = 72.6% CIE Type – Direct Spacing Criteria: 1.58 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 3571.36 14.3 19.7 0-40 6233.94 24.9 34.3 0-60 12806.35 51.2 70.5 0-90 18156.91 72.6 100 90-120 3.43 0 0 90-130 3.43 0 0 90-150 3.43 0 0 90-180 3.43 0 0 0-180 18160.34. 72.6 100.0 TOTAL LUMINAIRE EFFICIENCY = 85.5% RC RW 0 1 2 3 4 5 6 7 8 9 10 70 79 70 62 56 51 47 43 40 37 34 32 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 80 70 50 30 10 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 79 79 79 77 77 77 77 73 73 73 69 69 69 65 65 65 65 62 58 67 63 60 57 60 57 54 56 54 52 53 51 50 55 50 45 60 54 49 44 51 46 43 48 44 41 45 42 39 48 41 36 54 46 40 36 44 39 34 41 37 33 39 35 32 42 35 30 49 41 34 29 38 33 29 36 31 28 34 30 27 37 30 25 45 36 30 25 34 28 24 32 27 23 30 26 23 33 26 21 41 32 26 21 30 25 21 29 24 20 27 23 20 30 23 19 38 29 23 18 27 22 18 26 21 18 25 20 17 27 21 16 35 26 20 16 25 20 16 24 19 16 23 18 15 24 19 15 33 24 18 14 23 18 14 22 17 14 21 17 14 22 17 13 31 22 17 13 21 16 13 20 16 12 19 15 12 0 0 64 48 38 30 25 21 18 16 14 12 11 REPORT NUMBER: KPBG250PST Lamps: 250 W Metal Halide Pulse Start Mogul Base RC RW 0 1 2 3 4 5 6 7 8 9 10 70 86 78 70 63 57 52 48 44 41 38 35 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 80 70 50 30 10 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 86 86 86 84 84 84 84 81 81 81 77 77 77 74 74 74 71 68 76 73 70 67 70 67 65 67 65 63 64 62 63 58 53 68 62 57 53 59 55 51 57 53 50 55 52 55 48 43 61 53 47 42 51 46 42 49 45 41 47 43 48 41 35 55 47 40 35 45 39 34 43 38 34 41 37 42 35 30 50 41 34 29 39 34 29 38 33 29 37 32 37 30 25 46 37 30 25 35 29 25 34 29 25 33 28 33 27 22 43 33 26 22 32 26 22 31 25 21 30 25 30 24 19 40 30 23 19 29 23 19 28 23 19 27 22 28 21 17 37 27 21 17 26 21 17 25 20 17 25 20 25 19 15 35 25 19 15 24 19 15 23 18 15 23 18 10 74 61 49 40 33 28 24 21 19 17 15 0 0 73 59 47 38 32 27 23 20 17 15 14 REPORT NUMBER: KPBG250PG Lamps: 250 W Metal Halide Pulse Start Mogul Base Zone 0-10 74.54 10-20 20-30 30-40 304.58 486.47 948.61 40-50 1471.61 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 50-60 60-70 70-80 80-90 1887.31 2239.17 2561.7 2747.67 RC 80 70 50 30 10 0 RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 94 94 94 94 87 87 87 87 76 76 76 65 65 65 55 55 55 51 1 80 74 68 63 74 68 63 59 58 54 51 49 46 43 40 38 36 31 90-100 2779.02 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 2564.95 2148.15 1109.49 37.55 3.93 .76 .09 .03 974 CIE Type – General Diffuse REPORT NUMBER: KPBG250PAN Lamps: 250 W Metal Halide Pulse Start Mogul Base COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD 2 71 61 54 47 65 57 50 44 48 42 38 40 36 32 32 29 26 22 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 865.59 3.5 4.1 0-40 1814.2 7.3 8.5 0-60 5173.13 20.7 24.2 0-90 12721.67 50.9 59.5 90-120 7492.124 30 35.1 90-130 8601.61 34.4 40.3 90-150 8643.09 34.6 40.5 90-180 8643.97 34.6 40.5 0-180 21365.63 85.5 100.0 3 4 5 6 7 8 9 10 63 57 52 47 44 40 37 35 52 45 40 35 31 28 25 23 44 36 31 27 23 20 18 16 37 30 25 21 18 15 13 12 58 52 47 43 40 37 34 32 48 42 36 32 29 26 24 22 41 34 29 25 22 19 17 15 34 28 23 19 16 14 12 11 41 35 31 27 24 22 20 18 34 29 24 21 18 16 14 13 29 24 19 16 14 12 10 9 33 29 25 22 20 18 17 15 29 24 20 17 15 13 12 11 25 20 16 13 11 10 9 8 27 23 20 18 16 15 13 12 23 19 16 14 12 11 10 9 20 16 13 11 9 8 7 6 16 13 10 8 7 6 5 4 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III HID 50-250 Watt Luminaire Photometric Data 250 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on fixtures with a 250-watt clear Pulse Start Metal Halide lamp (23,000 lumen). 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 438.39 727.7 1709.75 2094.28 4828.69 4189.12 2131.34 748.43 1109.54 701.88 410.51 237.73 123.53 37.79 3.51 .32 Zone Lumens 0-10 10-20 28.96 214.01 20-30 402.91 TOTAL LUMINAIRE EFFICIENCY = 79% CIE Type – Semi-Direct Spacing Criteria: 1.64 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT. 0-30 689.84 2.8 3.5 0-40 1417.54 5.7 7.2 0-60 5221.56 20.9 26.4 0-90 16370.71 65.5 82.9 90-120 2559.84 10.2 13 90-130 2970.35 11.9 15 90-150 3331.61 13.3 16.9 90-180 3373.23 13.5 17.1 0-180 19743.94 79 100.0 TOTAL LUMINAIRE EFFICIENCY = 84% CIE Type – Semi-Direct Spacing Criteria: 1.64 REPORT NUMBER: KPBR250PJ3 Lamps: 250 W Metal Halide Pulse Start Mogul Base RC RW 0 1 2 3 4 5 6 7 8 9 10 70 91 77 66 58 52 47 43 39 36 33 31 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 80 70 50 30 50 30 10 70 50 30 10 50 30 10 50 30 10 50 91 91 91 87 87 87 87 80 80 80 74 74 74 68 70 65 60 73 67 62 57 61 57 53 55 52 49 50 56 48 42 62 54 46 40 48 42 37 43 38 34 39 46 37 30 55 44 36 29 39 32 27 35 29 24 31 39 30 23 49 37 29 22 33 26 20 30 23 18 26 34 25 18 44 32 24 17 29 21 16 25 19 14 22 30 21 15 40 28 20 14 25 18 13 22 16 12 20 26 18 12 37 25 17 12 22 16 11 20 14 9 18 24 16 10 34 22 15 10 20 14 9 18 12 8 16 21 14 9 32 20 13 8 18 12 8 16 11 7 15 19 12 8 29 18 12 7 17 11 7 15 10 6 13 10 30 68 48 35 26 21 17 14 12 11 10 9 10 68 45 31 22 17 13 10 8 7 6 5 0 0 65 42 28 19 14 10 8 6 5 4 4 REPORT NUMBER: KPBR250PJ5 Lamps: 250 W Metal Halide Pulse Start Mogul Base 30-40 678.83 40-50 1539.03 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD 50-60 60-70 70-80 80-90 90-100 1537.39 4450.44 5789.28 3160.26 855.15 EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 RC 80 70 50 30 10 0 RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 97 97 97 97 93 93 93 93 86 86 86 80 80 80 74 74 74 71 1 80 72 66 60 76 69 63 57 63 58 53 57 53 49 52 48 45 42 100-110 1095.13 110-120 120-130 130-140 140-150 150-160 160-170 170-180 596.59 345.11 189.6 82.84 22.91 2.78 .71 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP 0-30 645.89 2.6 0-40 1324.72 5.3 0-60 4401.15 17.6 0-90 17801.14 71.2 90-120 2546.87 10.2 90-130 2891.98 11.6 90-150 3164.41 12.7 90-180 3190.80 12.8 0-180 20991.94 84 %FIXT. 3.1 6.3 21 84.8 12.1 13.8 15.1 15.2 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 2 68 57 48 40 65 54 46 38 49 42 35 44 38 33 39 34 30 27 3 4 5 6 7 8 9 10 60 54 48 44 41 38 35 33 47 40 34 30 27 24 22 20 37 29 24 21 18 16 14 12 29 22 17 14 11 10 8 7 56 50 45 41 38 35 33 31 44 37 32 28 25 23 21 19 35 28 23 20 17 15 13 12 27 21 16 13 11 9 8 7 40 33 29 25 23 21 19 17 32 25 21 18 15 14 12 11 25 19 15 12 10 8 7 6 35 30 26 23 20 18 17 16 29 23 19 16 14 12 11 10 23 17 13 11 9 8 7 6 31 26 23 20 18 16 15 14 26 20 17 14 12 11 10 9 21 15 12 10 8 7 6 5 18 13 9 7 6 5 4 3 975 Lighting: Enclosed and Gasketed — Area — HID Lumens 28.46 222.99 Lighting Zone 0-10 10-20 For candlepower values of fixtures with other PSMH lamps, (21,000 lumen) PSMH lamp – 0.913. For candlepower values of fixture with guard, multiply by 0.95. Mercmaster™ III 400 Luminaire for Hazardous and Wet Locations High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Lighting: Enclosed and Gasketed — Area — HID Lighting Applications • Enclosed and gasketed fixtures suitable for use in: — Marine and wet locations — A wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by the National Electrical Code as Class I, Division 2; Class II, Division 1 and 2; and Class III — In applications involving medium and high mounting heights — In applications where energy efficient, high lumen output is required — The AEx nA nR Mercmaster III fixture is factory sealed and prevents vapors and gases from entering the globe chamber. There are no seals or putty required. — The AEx nR Mercmaster III fixture requires all wiring entries to be sealed. — Non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust, corrosive atmosphere or high ambient temperatures are encountered • Typical applications include: — Pulp and paper mills — Processing plants — Chemical plants — Oil refineries — Foundries — Manufacturing plants — Storage areas — Waste and sewage treatment — Other areas where dust, water, dirt and rough usage are a problem Features • Superior corrosion resistance. • Choice of light sources: high pressure sodium, and pulse start metal halide. • Six mounting arrangements to suit any lighting layout: pendant, ceiling, wall bracket, 25° (angle) stanchion, 90° (straight) stanchion and cone. • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360º compression at all points on ballast housing gasket for positive sealing. Swing away design of captive bolt and nut simplifies servicing. • Choice of optical assemblies: prismatic globe; enclosed reflec tor with sealed lens; or Type V or Type II closed prismatic glass refractor, with or without guards. • Wide choice of photometric distributions. • All fixtures designed to perform in a 104 ºF/40 ºC ambient temper ature. Selected fixtures are suitable for ambient temperatures up to 149 ºF/65 ºC. • Mogul base porcelain lamp holder with nickel-plated contacts has 392 °F/200 °C rated welded leads, pre-wired to the ballast. Assures trouble-free operation in installations where high ambient temperatures are encountered. • For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing. • Terminal blocks are provided for Zone 2 fixtures to facilitate wiring. • Standard dome of 30º angle reflectors made of fiberglass rein forced white polyester. Highly resistant to corrosive atmospheres. • A wide range of voltages available (120 to 600 Volt) and ballast types (CWA, CWI and Super CWA). Enclosed Reflector Prismatic Glass Globe 12” Glass Refractor • One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life. • All Mercmaster mounting hoods have provision for easy field in stallation of fuses in fixtures (see fuse kit listings). Standard Materials • Mounting hoods and ballast bodies: cast copperfree (less than 4/10 of 1% copper) aluminum • Reflectors: Fiberglass reinforced white polyester • Guards, hardware and catch assemblies: stainless steel • Globe: heat- and impact-resistant internally fluted glass • Refractors: prismatic glass • Enclosed reflector: etched Alzak aluminum with sealed, tempered heat- and impact-resistant lens • Body and globe gaskets: high-temperature silicone rubber Standard Finishes • Mounting hoods and guards: epoxy powder coat, electrostatically applied for complete and uniform protection Options • AEx nA nR fixtures are available with a Class I, Zone 2 rating. Add suffix -Z2. • AEx nR fixtures are available with a Class I, Zone 2 rating. Add suffix -ZB. • Ex nR fixtures are available with a Class I, Zone 2 rating. Add suffix -Z V. • Quartz Auxiliary comes to full brightness immediately and remains lit until the HID lamp attains 60-70% of full illumination. Quartz Auxiliary supplied with relay switch and socket to accept 120V quartz double-contact bayonet base lamp (not included). (Not suitable for hazardous locations.) Add suffix -E. • Factory sealed photocontrol available. See PCD2 Series. • Smart Starter incorporates a 1-1/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location, reducing maintenance and repair costs. Available for all HPS and PSMH fixtures. Add suffix -S. Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844, UL 60079-0, UL 60079-15 • UL Listed: E10444 V CSA Certification only. 976 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaires for Hazardous and Wet Locations High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Illustrated Features Lighting High Temperature Sockets Mogul base high-temperature porcelain sockets. Aluminum Inner Reflector Solid aluminum inner reflector (for refractor ballast housings only) improves photometric efficiency. Globe Chamber Completely sealed from the ballast housing and outside vapors/air (nR). "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. Terminal Blocks (Zone 2) A seven-point terminal block is provided to facilitate wiring. Terminal block accommodates wire size ranging from #8 to #24 AWG. Stainless Steel Inserts Ballast bodies have stainless steel threaded inserts to receive stainless steel screws for reflectors and guard. Prevents "freezing”, allowing guards and reflectors to be easily removed and replaced at any time, without damage to the housing. Ballast Assembly Utilizing non-sparking components avoiding the ignition of gases or vapors that may be present (nA). Mounting Hood and Globe Gaskets Silicone rubber gasket seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Photocell Available for all fixtures except cone and ceiling mount. Installs through knock-out in mounting hood. Provides continuous ON-OFF dusk-to-dawn control. Prismatic Glass Globes, Refractors and Enclosed Reflector Heat-resistant globes, refractors and enclosed reflector thread into ballast housing and seal against a high temperature silicone rubber gasket. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 977 Lighting: Enclosed and Gasketed — Area — HID Vented Reflectors Reflectors are thick, tough fiberglass- reinforced white polyester, vented for cooler operation. Quickly attach with furnished stainless steel screws. Mercmaster™ III 400 Luminaires for Hazerdous and Wet Locations High Pressure Sodium and Pulse Start Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide Series: KP Mercmaster III 400 Lighting: Enclosed and Gasketed — Area — HID Lighting KP A L Lamp Type: L - High Pressure Sodium P - Pulse Start Metal Halide Mounting: A - Pendant (rigid mounting) C - Ceiling CH - Pendant Cone Hood F - Pendant (flexible mounting) ST - 90° Stanchion S - 25° Stanchion WB - Wall 40 10 Hub Size: 75 - 3/4” NPT 10 - 1” NPT 125 - 1-1/4” NPT stanchion 150 - 1-1/2” NPT stanchion J5 G MT Guard Options: ➋ G - Globe Guard BG - Refractor Guard NG - Enclosed Relfector Guard Blank - No Guard Wattage: Optical Assembly: ➊ 25 - 250 W HPS, PSMH ➎ Blank - Glass Globe 32 - 320 W PSMH J2 - NEMA II Glass 35 - 350 W PSMH Refractor ➍ 40 - 400 W PSMH & HPS J5 - NEMA V Glass 40 - 400 W MH V Refractor ➍ R - Enclosed Refractor with Sealed Lens S Z2 Options: E - Emergency Quartz F - Fuse Kit (Specify Voltage) S - Smart Starter H1 - Photocontrol 120 V H2 - Photocontrol 208 V H3 - Photocontrol 240 V H4 - Photocontrol 277 V C - Safety Cable Adapted V E40 - Export Socket D - E-40 Export Socket V T - Terminal Blocks V V - Anti-Vibration Modifications V X - Appledapter ➏ Mounting Hood Adapter V Voltage: ➌ MT - 120/208/240/277, 60Hz 5MT - 120/208/240/ 277/480, 60Hz 48 - 480, 60Hz 125 - 120, 50Hz 226 - 220, 60Hz 235 - 230, 50Hz 245 - 240, 50 Hz C2 - 208, 60 Hz, CWI V C3 - 240, 60 Hz, CWI V C6 - 480, 60 Hz, CWI V C7 - 600, 60 Hz, CWI V TT - 120/277/347, 60 Hz, CWA V Suffix: Z2 - Zone 2 suffix (required for AEx nA nR rating) ZB - Zone 2 suffix (required for AEx nR rating) Z - Zone 2 suffix (required for Ex nR) V Refer to “Mounting Hoods and Ballast” page for available Voltage Configuration. NO DESIGNATION is required for fixtures with standard type globe. NO DESIGNATION is required for fixtures without guards. ➌ Other voltages available. Contact your local sales representative. ➍ J2 and J5 refractions are not available with Z2 or ZB suffix. ➎ Available for 480 V, 50 Hz and 5MT ballast options. For MT and TT voltage suffix, see Mercmaster III 50-250 Luminaries. ➏ Appledapter is available for use with the pendant, ceiling and angled stanchion mounting only. V CSA Certification only. 978 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaire Thermal Performance Class I, Division 2; Class II, Division 1; Simultaneous Exposure to Hazardous Conditions on Both Classifications Temperature identification numbers of Mercmaster III – 400 Fixtures. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 “T” Numbers Lamp 250 250 HPS HPS PSMH 230/110 104/40 T2 T2 T2 T2 T3B T3B T4 T4A 325 325 325 325 230/110 131/55 325 325 T2 T2 — — T3B T4A — — T1 325 230/110 149/65 — — T2 T2 — — T3B T4 — — T1 350 194/90 104/40 350 T3 * T3 * T3C T3C T1 T1 T1 350 T4 T4A — — — — T1 T1 350 194/90 104/40 T2B T2B T2B T2C 194/90 131/55 T2A T2A T2B T2C — — — — — — — — — — T2C — — — — — — — — 194/90 104/40 T2B T2B T2B T2B — — T3C T3C — — — — 194/90 131/55 T2A T2A T2A T2B — — — — — — — — 194/90 104/40 T2B T2B T2B T2B — — T3C T3C — — — — 194/90 149/65 — T3 (EF) T3 (EF) 320 PSMH 350 PSMH 194/90 131/55 T2A T2A T2A T2B — — — — — — — — 400 PSMH 194/90 104/40 T2A T2A T2B T2B — — T3C T3C — — — — 400 MH V 194/90 104/40 T2 T2A T2A — — T3A T4 — — — — T2 “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (ºC) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 ➊ “T” numbers are for Groups E and F only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 979 Lighting: Enclosed and Gasketed — Area — HID 400 Type Lighting Watts Class II, Division 1 Simultaneous Exposure Supply Class I, Division 2 Groups E, F and G Class I, Division 2 / Class II, Division 1 Wire Ambient Temp. Temp. Globe & Enclosed Globe & Enclosed Globe & Enclosed (°F/°C) ➊ (°F/°C) ➊ Globe Reflector Refractor Reflector Globe Reflector Refractor Reflector Globe Reflector Refractor Reflector Mercmaster™ III 400 Luminaire Thermal Performance Class I, Zone 2, AEx nR IIC, AEx nA nR IIC, IP66, NEMA 4X Temperature identification numbers of Mercmaster III – 400 Fixtures. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 “T” Numbers Type Supply Wire Temp. (°F/°C) ➊ Ambient Temp. (°F/°C) ➊ Globe Globe & Reflector Enclosed Reflector Globe Globe & Reflector Enclosed Reflector HPS 230/110 104/40 T4 T4 T5 T4 T4 T5 HPS 230/110 131/55 T3 T3 T3 T3 T3 T3 HPS 230/110 149/65 — — T3 — — T3 Lighting Lamp Watts 250 Lighting: Enclosed and Gasketed — Area — HID 400 250 320 350 Class 1, Zone 2 AEx nA nR / Ex nR Class 1, Zone 2 AEx nR HPS 194/90 104/40 T4 T4 T5 T4 T4 T5 PSMH 194/90 104/40 T3 T3 T3 — — — PSMH 194/90 131/55 T3 T3 T3 — — — PSMH 194/90 104/40 — — T3 — — — PSMH 194/90 104/40 T4 T4 T4 T4 T4 T4 PSMH 194/90 131/55 T3 T3 T4 T3 T3 T4 PSMH 194/90 104/40 T4 T4 T4 T4 T4 T4 PSMH 194/90 131/55 T3 T3 T4 T3 T3 T4 400 PSMH 167/75 104/40 T3 T3 T3 T3 T3 T3 400 MH V 167/75 104/40 T3 T3 T3 — — — “T” Numbers represent the maximum surface temperature for luminaries with AEx nA nR and AEx nR rating: To comply with AEx nR Requirements, all wiring entries must be sealed. “T” Number T1 T2 T3 T4 T5 T6 Temp. Range (°F) 547-842 394-572 277-392 214-275 187-212 185 Temp. Range (°C) 301-450 201-300 136-200 101-135 86-100 85 ➊ Use 194 °F/90 °C rated supply wire. V CSA Certification only. 980 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaires for Hazerdous and Wet Locations 250 W, 400 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Type Mounting Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Fixtures Outside Type (Salt Water) Type 4X IP66 Hub Size (Inches) With Globe Catalog Numbers ➎ With Type V 12” Refractor With Enclosed Reflector 3/4 KPAL2575 KPAL2575J5 KPAL2575R Pendant — One Hub, Rigid Mounting HPS 250 400 KPAL2510 KPAL2510J5 KPAL2510R KPAL4075 KPAL4075J5 KPAL4075R 1 KPAL4010 KPAL4010J5 KPAL4010R 3/4 KPCHL2575 KPCHL2575J5 KPCHL2575R Lighting: Enclosed and Gasketed — Area — HID 1 3/4 Lighting HPS Shown with Globe Pendant Cone — One Hub, Rigid Mounting HPS HPS 250 400 1 KPCHL2510 KPCHL2510J5 KPCHL2510R 3/4 KPCHL4075 KPCHL4075J5 KPCHL4075R 1 KPCHL4010 KPCHL4010J5 KPCHL4010R Shown with 12" Glass Refractor Ceiling — Five Hubs, Four Close-Up Plugs HPS 250 HPS 400 3/4 KPCL2575 KPCL2575J5 KPCL2575R 1 KPCL2510 KPCL2510J5 KPCL2510R 3/4 KPCL4075 KPCL4075J5 KPCL4075R 1 KPCL4010 KPCL4010J5 KPCL4010R Shown with Enclosed Reflector For Flexible Pendant Mount, change A to F in catalog number. To order fixture with NEMA Type II refractor, change digits J5 in catalog number to J2. Refractor not available for Z, Z2 or ZB suffix. For fixtures with guards, add suffix G before adding voltage suffix. BG for refractor. NG for enclosed reflector. ➍ Add the following voltage and frequency designations before Z, Z2 or ZB suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 250 X X X X — X X — — — — — X HPS 400 X X X X — — X — — — — — X PSMH 250 — X X X — — X — — — — — — PSMH 320 X X X X — — X — — — — — X PSMH 350 X X X X — — X — — — — — X PSMH 400 X X X — — — X — — — — — X 400 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 981 Mercmaster™ III 400 Luminaires for Hazardous and Wet Locations 250 W, 400 W HPS Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Type Mounting Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➎ With Type V 12” Refractor With Globe With Enclosed Reflector Lighting: Enclosed and Gasketed — Area — HID Lighting Wall Five Hubs, Four Close-Up Plugs HPS 250 HPS 400 HPS 250 3/4 KPWBL2575 KPWBL2575J5 KPWBL2575R 1 KPWBL2510 KPWBL2510J5 KPWBL2510R 3/4 1 KPWBL4075 KPWBL4075J5 KPWBL4075R KPWBL4010 KPWBL4010J5 KPWBL4010R KPSL25125 KPSL25125J5 KPSL25125R Shown with 12” Glass Refractor 25° Stanchion One Hub HPS 400 HPS 250 HPS 400 1-1/4 1-1/2 KPSL25150 KPSL25150J5 KPSL25150R 1-1/4 KPSL40125 KPSL40125J5 KPSL40125R 1-1/2 KPSL40150 KPSL40150J5 KPSL40150R Shown with Prismatic Glass Globe and Optional Guard 90° Stanchion One Hub 1-1/4 KPSTL25125 KPSTL25125J5 KPSTL25125R 1-1/2 KPSTL25150 KPSTL25150J5 KPSTL25150R 1-1/4 KPSTL40125 KPSTL40125J5 KPSTL40125R 1-1/2 KPSTL40150 KPSTL40150J5 KPSTL40150R Shown with Prismatic Glass Globe and Optional Guard For Flexible Pendant Mount, change A to F in catalog number. To order fixture with NEMA Type II refractor, change digits J5 in catalog number to J2. Refractor not available for Z, Z2 or ZB suffix. For fixtures with guards, add suffix G before adding voltage suffix. BG for refractor. NG for enclosed reflector. ➍ Add the following voltage and frequency designations before Z, Z2 or ZB suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 250 X X X X — X X — — — — — X HPS 400 X X X X — — X — — — — — X PSMH 250 — X X X — — X — — — — — — PSMH 320 X X X X — — X — — — — — X PSMH 350 X X X X — — X — — — — — X PSMH 400 X X X — — — X — — — — — X 400 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. 982 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaires for Hazardous and Wet Locations 250 W, 320 W, 350 W, 400 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Type Mounting Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) With Globe Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➎ With Type V 12” Refractor With Enclosed Reflector Pendant One Hub, Rigid Mounting PSMH 320 PSMH 350 PSMH 400 3/4 KPAP2575 KPAP2575J5 KPAP2575R 1 KPAP2510 KPAP2510J5 KPAP2510R 3/4 KPAP3275 KPAP3275J5 KPAP3275R 1 KPAP3210 KPAP3210J5 KPAP3210R 3/4 KPAP3575 KPAP3575J5 KPAP3575R 1 KPAP3510 KPAP3510J5 KPAP3510R 3/4 KPAP4075 KPAP4075J5 KPAP4075R 1 KPAP4010 KPAP4010J5 KPAP4010R 3/4 KPCHP2575 KPCHP2575J5 KPCHP2575R 1 KPCHP2510 KPCHP2510J5 KPCHP2510R 3/4 KPCHP3275 KPCHP3275J5 KPCHP3275R 1 KPCHP3210 KPCHP3210J5 KPCHP3210R 3/4 KPCHP3575 KPCHP3575J5 KPCHP3575R 1 KPCHP3510 KPCHP3510J5 KPCHP3510R 3/4 KPCHP4075 KPCHP4075J5 KPCHP4075R 1 KPCHP4010 KPCHP4010J5 KPCHP4010R 3/4 KPCP2575 KPCP2575J5 KPCP2575R 1 KPCP2510 KPCP2510J5 KPCP2510R 3/4 KPCP3275 KPCP3275J5 KPCP3275R 1 KPCP3210 KPCP3210J5 KPCP3210R 3/4 KPCP3575 KPCP3575J5 KPCP3575R 1 KPCP3510 KPCP3510J5 KPCP3510R 3/4 KPCP4075 KPCP4075J5 KPCP4075R 1 KPCP4010 KPCP4010J5 KPCP4010R Lighting: Enclosed and Gasketed — Area — HID Shown with Globe 250 ➐ Lighting PSMH Pendant Cone One Hub, Rigid Mounting PSMH PSMH PSMH Shown with 12" Glass Refractor PSMH 250 ➐ 320 350 400 Ceiling Five Hubs, Four Close-Up Plugs PSMH PSMH PSMH Shown with Enclosed Refractor PSMH 250 ➐ 320 350 400 For Flexible Pendant Mount, change A to F in catalog number. To order fixture with NEMA Type II refractor, change digits J5 in catalog number to J2. Refractor not available for Z, Z2 or ZB suffix. For fixtures with guards, add suffix G before adding voltage suffix. BG for refractor. NG for enclosed reflector. ➍ Add the following voltage and frequency designations before Z, Z2 or ZB suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 250 X X X X — X X — — — — — X HPS 400 X X X X — — X — — — — — X PSMH 250 — X X X — — X — — — — — — PSMH 320 X X X X — — X — — — — — X PSMH 350 X X X X — — X — — — — — X PSMH 400 X X X — — — X — — — — — X 400 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 983 Mercmaster™ III 400 Luminaires for Hazardous and Wet Locations 250 W, 320 W, 350 W, 400 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Type Mounting Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Fixtures Outside Type (Salt Water) Type 4X IP66 Hub Size (Inches) With Globe Catalog Numbers ➎ With Type V 12” Refractor With Enclosed Reflector 3/4 KPWBP2575 KPWBP2575J5 KPWBP2575R 1 KPWBP2510 KPWBP2510J5 KPWBP2510R 3/4 KPWBP3275 KPWBP3275J5 KPWBP3275R KPWBP3210 KPWBP3210J5 KPWBP3210R KPWBP3575 KPWBP3575J5 KPWBP3575R KPWBP3510 KPWBP3510J5 KPWBP3510R KPWBP4075 KPWBP4075J5 KPWBP4075R KPWBP4010 KPWBP4010J5 KPWBP4010R 1-1/4 KPSP25125 KPSP25125J5 KPSP25125R 1-1/2 KPSP25150 KPSP25150J5 KPSP25150R 1-1/4 KPSP32125 KPSP32125J5 KPSP32125R 1-1/2 KPSP32150 KPSP32150J5 KPSP32150R 1-1/4 KPSP35125 KPSP35125J5 KPSP35125R 1-1/2 KPSP35150 KPSP35150J5 KPSP35150R 1-1/4 KPSP40125 KPSP40125J5 KPSP40125R 1-1/2 KPSP40150 KPSP40150J5 KPSP40150R 1-1/4 KPSTP25125 KPSTP25125J5 KPSTP25125R 1-1/2 KPSTP25150 KPSTP25150J5 KPSTP25150R 1-1/4 KPSTP32125 KPSTP32125J5 KPSTP32125R 1-1/2 KPSTP32150 KPSTP32150J5 KPSTP32150R 1-1/4 KPSTP35125 KPSTP35125J5 KPSTP35125R 1-1/2 KPSTP35150 KPSTP35150J5 KPSTP35150R 1-1/4 KPSTP40125 KPSTP40125J5 KPSTP40125R 1-1/2 KPSTP40150 KPSTP40150J5 KPSTP40150R Lighting Wall Five Hubs, Four Close-Up Plugs PSMH PSMH Lighting: Enclosed and Gasketed — Area — HID PSMH Shown with 12” Glass Refractor 250 ➐ 320 350 PSMH 400 PSMH 250 ➐ PSMH 320 1 3/4 1 3/4 1 25° Stanchion One Hub PSMH Shown with Prismatic Glass Globe and Optional Guard 350 PSMH 400 PSMH 250 ➐ 90° Stanchion One Hub PSMH Shown with Prismatic Glass Globe and Optional Guard 320 PSMH 350 PSMH 400 For Flexible Pendant Mount, change A to F in catalog number. To order fixture with NEMA Type II refractor, change digits J5 in catalog number to J2. Refractor not available for Z, Z2 or ZB suffix. For fixtures with guards, add suffix G before adding voltage suffix. BG for refractor. NG for enclosed reflector. ➍ Add the following voltage and frequency designations before Z, Z2 or ZB suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 250 X X X X — X X — — — — — X HPS 400 X X X X — — X — — — — — X PSMH 250 — X X X — — X — — — — — — PSMH 320 X X X X — — X — — — — — X PSMH 350 X X X X — — X — — — — — X PSMH 400 X X X — — — X — — — — — X 400 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. 984 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaires for Hazardous and Wet Locations 400 W MH V Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Type Mounting Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Hub Size (Inches) With Globe Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➎ With Type V 12” Refractor With Enclosed Reflector Pendant One Hub, Rigid Mounting 400 KPAH4075 KPAH4075J5 KPAH4075R 1 KPAH4010 KPAH4010J5 KPAH4010R 3/4 KPCHH4075 KPCHH4075J5 KPCHH4075R 1 KPCHH4010 KPCHH4010J5 KPCHH4010R 3/4 KPCH4075 KPCH4075J5 KPCH4075R 1 KPCH4010 KPCH4010J5 KPCH4010R Lighting: Enclosed and Gasketed — Area — HID 3/4 Lighting MH V Shown with Globe Pendant Cone One Hub, Rigid Mounting MH V 400 Shown with 12" Glass Refractor Ceiling Five Hubs, Four Close-Up Plugs MH V 400 Shown with Enclosed Refractor For Flexible Pendant Mount, change A to F in catalog number. To order fixture with NEMA Type II refractor, change digits J5 in catalog number to J2. Refractor not available for Z, Z2 or ZB suffix. For fixtures with guards, add suffix G before adding voltage suffix. BG for refractor. NG for enclosed reflector. ➍ Add the following voltage and frequency designations before Z, Z2 or ZB suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 250 X X X X — X X — — — — — X HPS 400 X X X X — — X — — — — — X PSMH 250 — X X X — — X — — — — — — PSMH 320 X X X X — — X — — — — — X PSMH 350 X X X X — — X — — — — — X PSMH 400 X X X — — — X — — — — — X 400 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. ➐ Available for 480 V, 50 Hz and 5MT ballast options. For MT and TT voltage suffix, see Mercmaster III 50-250 Luminaries. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 985 Mercmaster™ III 400 Luminaires for Hazardous and Wet Locations 400 W MH V Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Type Mounting Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Type Lamp Watts Fixtures Outside Type (Salt Water) Type 4X IP66 Hub Size (Inches) With Globe Catalog Numbers ➎ With Type V 12” Refractor With Enclosed Reflector 3/4 KPWBH4075 KPWBH4075J5 KPWBH4075R KPWBH4010 KPWBH4010J5 KPWBH4010R 1-1/4 KPSH40125 KPSH40125J5 KPSH40125R 1-1/2 KPSH40150 KPSH40150J5 KPSH40150R 1-1/4 KPSTH40125 KPSTH40125J5 KPSTH40125R 1-1/2 KPSTH40150 KPSTH40150J5 KPSTH40150R Lighting: Enclosed and Gasketed — Area — HID Lighting Wall Five Hubs, Four Close-Up Plugs MH V 400 MH V 400 MH V 400 1 Shown with 12” Glass Refractor 25° Stanchion One Hub Shown with Prismatic Glass Globe and Optional Guard 90° Stanchion One Hub Shown with Prismatic Glass Globe and Optional Guard For Flexible Pendant Mount, change A to F in catalog number. To order fixture with NEMA Type II refractor, change digits J5 in catalog number to J2. Refractor not available for Z, Z2 or ZB suffix. For fixtures with guards, add suffix G before adding voltage suffix. BG for refractor. NG for enclosed reflector. ➍ Add the following voltage and frequency designations before Z, Z2 or ZB suffix: Voltage Suffixes Lamp Type Lamp Watts MT 5MT 48 125 225 226 235 245 C2 V C3 V C6 V C7 V TT V HPS 250 X X X X — X X — — — — — X HPS 400 X X X X — — X — — — — — X PSMH 250 — X X X — — X — — — — — — PSMH 320 X X X X — — X — — — — — X PSMH 350 X X X X — — X — — — — — X PSMH 400 X X X — — — X — — — — — X 400 X — — X X — — X X X X X X MH V Voltages: 125 - 120 V 50 Hz 245 - 240 V 50 Hz MT - 120/208/240/277 V 60 Hz 225 - 225 V 50 Hz C2 - 208 V 60 Hz, CWI V 5MT - 120/208/240/277/480 V 60 Hz 226 - 220 V 60 Hz C3 - 240 V 60 Hz, CWI V C7 - 600 V 60 Hz, CWI V, 48 - 480 V 60 Hz 235 - 230 V 50 Hz C6 - 480 V 60 Hz, CWI V TT - 120/277/347 V 60 Hz, CWA V ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➏ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. 986 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaire Mounting Hood and Ballast Bodies High Pressure Sodium and Pulse Start Metal Halide - Hazardous and Wet Locations Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Mounting Hoods Description Hub Size (Inches) Catalog Number Pendant 3/4 KPA-75 1 KPA-100 3/4 KPAF-75 1 KPAF-100 3/4 KPCH-75 1 KPCH-100 Lighting One Hub, Rigid Mounting Pendant — Flexible One Hub, Flexible Mounting Pendant Cone Ceiling Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 3/4 KPWB-75 1 KPWB-100 Wall Five Hubs, Four Close-Up Plugs 25° Stanchion One Hub 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 90° Stanchion One Hub Ballast Bodies High Pressure Sodium — Constant Wattage (Min. P.F. 90%) Pulse Start Metal Halide — Super Constant Wattage (Min. P.F. 90%) Lamp Type HPS HPS PSMH PSMH PSMH PSMH MH V Lamp Watts 250 400 250 320 350 400 400 Catalog Numbers ➋➍ KPB250L ➊➌ KPB400L ➊➌ KPB250P ➊➌ KPB320P ➊➌ KPB350P ➊➌ KPB400P ➊➌ KPB400H Voltages: MT - 120/208/240/277 V 60 Hz 5MT - 120/208/240/277/480 V 60 Hz 48 - 480 V 60 Hz MT X X — X X X X 5MT X X X X X X — 48 X X X X X X — 125 - 120 V 50 Hz 225 - 225 V 50 Hz 226 - 220 V 60 Hz 235 - 230 V 50 Hz 125 X X X X X — X 225 — — — — — — X Voltage Suffixes 226 235 245 X X — — X — — X — — X — — X — — X — — — X 245 - 240 V 50 Hz C2 - 208 V 60 Hz, CWI V C3 - 240 V 60 Hz, CWI V C6 - 480 V 60 Hz, CWI V C2 V — — — — — — X C3 V — — — — — — X C6 V — — — — — — X C7 V — — — — — — X TT V X X X X X X X C7 - 600 V 60 Hz, CWI V, TT - 120/277/347 V 60 Hz, CWA V ➊ Add -S after voltage designation for ballast body with Smart Starter (HPS and PSMH only). ➋ Add -E after voltage designation for ballast body with provision for Quartz Emergency Light (not suitable for hazardous location). ➌ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). Add ZB suffix for restricted breathing protection (AEx nR). ➍ Add Z for factory sealed restricted breathing protection (Ex nR) V. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 987 Lighting: Enclosed and Gasketed — Area — HID One Hub, Rigid Mercmaster™ III 400 Luminaire Optics and Accessories High Pressure Sodium and Pulse Start Metal Halide - Hazardous and Wet Locations Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Description Catalog Number Lighting Prismatic Glass Globes — Heat-Resistant Clear VPGL-4HR Heat- and impact-resistant glass lens KPR-4HB Glass Globe Lighting: Enclosed and Gasketed — Area — HID Enclosed Reflector Assembly Enclosed Reflector Light Distribution IES/NEMA Distribution Curves Catalog Number Closed Prismatic Glass Refractors ➌ — All Heat-Resistant NEMA Type II KPRF400-2 NEMA Type V KPRF400-5 Glass Refractor Item Description Catalog Number White Polyester Reflectors Furnished with stainless steel screws For use with globe fixtures Standard and Deep Dome Standard Dome CMR4-ST ➊ 30° Angle CMR4-AN Deep Dome CMR4-DD ➊➋ Globe Guard KPGU400 Refractor Guard KPBG12 Enclosed Reflector Guard GHB7000-NG 30° Angle Guards Globe Guard Refractor Guard Enclosed Reflector Guard ➊ Contact your local sales representative if used with KPWB or KPST mounting hoods. ➋ Complies Dark Skies. ➌ Not suitable for use with Z, Z2 or ZB suffixes (Zone 2). 988 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaire Electrical Specifications and Fuse Kits High Pressure Sodium and Pulse Start Metal Halide - Hazardous and Wet Locations Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class I, Zone 2, AEx nR IIC (ZB) Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Electrical Specifications Electrical Specifications Operating Amps Total Watts 2.00 1.20 1.00 0.85 0.60 0.40 1.85 0.95 2.50 1.50 1.30 1.10 0.93 0.65 2.75 1.44 295 295 295 295 295 295 300 300 3.30 1.80 1.60 1.40 1.00 0.80 3.70 1.85 3.80 2.20 1.90 1.70 1.32 1.00 4.00 2.00 465 465 465 465 464 465 465 465 1.96 1.13 0.98 0.85 0.62 0.32 0.45 1.90 1.00 2.50 1.45 1.25 1.10 0.90 0.69 0.60 2.60 1.35 291 291 291 291 291 298 285 288 288 2.60 1.50 1.30 1.15 0.70 0.60 2.28 1.14 3.25 1.90 1.65 1.40 1.10 0.80 3.05 1.60 368 368 368 368 368 368 365 365 3.30 1.90 1.65 1.40 0.85 0.75 2.45 1.26 3.60 2.10 1.80 1.55 1.20 0.90 3.34 1.74 400 400 400 400 400 400 394 394 3.50 2.00 1.75 1.50 1.10 0.90 3.17 1.65 4.00 2.30 2.00 1.25 1.35 1.00 3.90 2.00 454 454 454 454 452 454 454 454 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Line Type of Voltage Ballast ➊ Frequency 400 Watt Metal Halide V 120 C.W.A. 60 208 C.W.A. 60 240 C.W.A. 60 277 C.W.A. 60 347 C.W.A. 60 480 C.W.I. 60 600 C.W.I. 60 120 C.W.A. 50 220 C.W.A. 50 240 C.W.A. 50 Starting Amps Operating Amps Total Watts 3.25 1.90 1.80 1.70 1.40 0.85 0.30 2.70 1.50 1.50 4.00 2.30 2.00 1.75 1.75 1.00 0.70 4.10 2.10 2.10 458 458 458 458 458 462 475 462 462 462 Fuse Kit Order fuses as a separate item by catalog number from right columns. Lamp Watts 250 250 320 350 400 Volts 120 208 240 277 347V 480 120 230 480 230 120 208 240 277 347V 480 120 230 120 208 240 277 347V 480 120 230 120 208 240 277 347V 480 120 230 Fuse Quantity Required 1 2 2 1 1 2 1 2 2 1 1 2 2 1 1 2 1 2 1 2 2 1 1 2 1 2 1 2 2 1 1 2 1 2 Fuse Catalog Number HPS F7 F4 F4 F3 F3 F2 F7 F4 — — — — — — — — — — — — — — — — — — F15 F8 F8 F5 F5 F5 F10 F6 PSMH — — — — F3 — — — F2 F3 F9 F6 F5 F4 F3 F3 F10 F5 F10 F7 F5 F5 F3 F3 F10 F5 F10 F7 F5 F5 F5 F3 F10 F5 MH V — — — — F3 — — — — — — — — — F3 — — — — — — — — — — — — — — — F5 — — — ➊ C.W.A. – Constant Wattage Autotransformer. HX-HPF – High Reactance High Power Factor Autotransformer. Super C.W.A. – Super Constant Wattage Autotransformer. V CSA Certification only. 989 Lighting: Enclosed and Gasketed — Area — HID Starting Amps Lighting Line Type of Voltage Ballast ➊ Frequency 250 Watt High Pressure Sodium 120 C.W.A. 60 208 C.W.A. 60 240 C.W.A. 60 277 C.W.A. 60 C.W.A. 60 347V 480 C.W.A. 60 120 C.W.A. 50 230 C.W.A. 50 400 Watt High Pressure Sodium 120 C.W.A. 60 208 C.W.A. 60 240 C.W.A. 60 277 C.W.A. 60 C.W.A. 60 347V 480 C.W.A. 60 120 C.W.A. 50 230 C.W.A. 50 250 Watt Pulse Start Metal Halide 120 C.W.A. 60 208 C.W.A. 60 240 C.W.A. 60 277 C.W.A. 60 C.W.A. 60 347V 480 C.W.A. 60 480 Super C.W.A. 60 120 Super C.W.A. 50 230 Super C.W.A. 50 320 Watt Pulse Start Metal Halide 120 Super C.W.A. 60 208 Super C.W.A. 60 240 Super C.W.A. 60 277 Super C.W.A. 60 Super C.W.A. 60 347V 480 Super C.W.A. 60 120 Super C.W.A. 50 230 Super C.W.A. 50 350 Watt Pulse Start Metal Halide 120 Super C.W.A. 60 208 Super C.W.A. 60 240 Super C.W.A. 60 277 Super C.W.A. 60 Super C.W.A. 60 347V 480 Super C.W.A. 60 120 Super C.W.A. 50 230 Super C.W.A. 50 400 Watt Pulse Start Metal Halide 120 Super C.W.A. 60 208 Super C.W.A. 60 240 Super C.W.A. 60 277 Super C.W.A. 60 Super C.W.A. 60 347V 480 Super C.W.A. 60 120 Super C.W.A. 50 230 Super C.W.A. 50 Fixtures Outside Type (Salt Water) Type 4X IP66 Mercmaster™ III 400 Luminaire Dimensions and Weights High Pressure Sodium and Pulse Start Metal Halide - Hazardous and Wet Locations Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Wall Lighting: Enclosed and Gasketed — Area — HID Lighting Pendant with Globe, Guard and Reflectors 25° Stanchion Cone Ceiling with Refractor Enclosed Reflector and Guards 90° Stanchion Deep Dome Mercmaster III – 400 Ballast and Accessory Weights Lamp Watts Ballast Housing (Wt. Lbs/Kg) HPS PSMH 250 24.5/11.1 — 320 — 28.0/12.7 350 — 28.5/12.9 400 28.5/12.9 28.5/12.9 Mounting Hoods and Reflectors Pendant Pendant Cone Ceiling Wall 25° Stanchion 90° Stanchion Standard Dome 30° Angle Wt. Lbs. 2.25/1.0 2.50/1.1 3.00/1.4 4.00/1.8 3.25/1.5 3.75/1.7 3.50/1.6 3.50/1.6 Globe Refractor, Enclosed Reflector and Guards Glass Globe Globe Guard 12” Glass Refractor Refractor Guard Enclosed Reflector Enclosed Reflector Guard Wt. Lbs/Kg 7.0/3.2 3.0/1.4 12.0/5.4 4.5/2.0 11.0/5.0 2.0/0.9 Weights are approximate. Add 0.25 lb. for Quartz option. 990 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PCD2 Series Factory Sealed Hazardous Location Photocontrol For use in Class I, Division 2, Groups A, B, C, D locations Maintains Class I, Division 2 rating for Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires, Mercmaster LED Class I, Division 2, Groups A, B, C, D NEMA 4X Applications Materials • Encapsulated photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. • Typical applications include walkways, security areas and any other outdoor lighting application. • For use with Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires. • For remote mounting in FS Boxes. • Encapsulated with epoxy sealing compound • FS: aluminum Lighting Certifications and Compliances • UL Standard: 1604 – Hazardous (Classified) Locations • cULus Recognized Features Factory-Installed Photocontrol Dimensions Add to fixture catalog after voltage; i.e.: KPWBL1075MTH1. Mercmaster III wall mounting hood with photocontrol installed shown Lighting: Enclosed and Gasketed — Area — HID • Factory sealed design eliminates the need for an explosionproof enclosure. • Can be easily installed in the field. • Solid state design for performance and reliability. • Available for 120, 208, 240, or 277 volts. • 50-400 W HID, incandescent or fluorescent, 50/60 Hz. • 1000 VA Voltage/Ampere • Minimum time delay: 15 seconds to eliminate nuisiance tripping. • Provided with (3) 18AWG stranded leads 6”/152.4 mm in length. • Will fit through standard 1/2” knockout. Voltage Range Suffix Designation 120 V, 50/60 Hz H1 208 V, 50/60 Hz H2 240 V, 50/60 Hz H3 277 V, 50/60 Hz H4 1.13” 28.7 mm 1.13” 28.7 mm Photocontrol in FS Cover for Use with FS/FD Box Supplied with two stainless steel screws. For neoprene gasket, order catalog number FS-GKR-1N. Voltage Range Catalog Number 120V, 50/60 Hz FSKA-PC120D2 208-277V, 50/60 Hz FSKA-PC247D2 1.375” 34.9 mm 1.375” 34.9 mm 2.56” 65.0 mm 2.56” 65.0 mm 1.13” 28.7 mm Photocontrol for Field Installation Max. Current Catalog Number 120 V, 50/60 Hz Voltage Range 8.3 Amp PC120D2 208-277 V, 50/60 Hz 3.5 Amp 34.9 mm PC247D2 2.56” 65.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1.375” 0.69” 17.5 mm 1.19” 30.2 mm 1.94” 49.2 mm 991 Mercmaster™ III 400 Luminaire Photometric Data 400 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 400-watt clear Pulse Start Metal Halide lamp (44,000 lumen). Lighting: Enclosed and Gasketed — Area — HID Lighting Zone For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 320 W (33,000 lumen) PSMH lamp – .750; for a 350 W (37,000 lumen) PSMH lamp – .840. For candlepower values of fixture with guard, multiply by – 0.95. Lumens Total Luminaire Efficiency = 92.6% 0-10 118.85 CIE Type - General Diffuse 10-20 488.36 20-30 948.99 30-40 1678.84 Coefficients of Utilization - Zonal Cavity Method 40-50 2714.15 Effective Floor Cavity Reflectance 0.20 50-60 3299.55 % Ceiling Rcc 60-70 3919.47 % Walls 70-80 4497.45 80-90 4892.41 90-100 REPORT NUMBER: KP40PG Lamps: 400 W Pulse Start Metal Halide with Globe * Lumens 70 50 30 10 0 0 100100100100 93 93 93 93 80 80 80 68 68 68 57 57 57 51 Zonal Lumen Summary Zone 80 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 1 86 80 74 69 79 73 68 64 62 58 54 51 48 45 41 39 37 32 % Lamp % Fixture 4803.79 0-30 1556.19 3.5 3.8 2 76 67 59 52 70 61 54 48 51 45 41 42 37 33 33 30 27 22 100-110 4404.56 0-40 3235.03 7.4 7.9 3 68 57 48 41 62 52 44 38 45 37 32 35 30 26 28 24 20 16 110-120 3849.71 0-60 9248.74 21.0 22.7 4 62 49 40 33 56 45 37 30 37 31 26 30 25 21 24 20 16 13 120-130 3078.18 0-90 22558.07 51.3 55.4 5 56 43 34 27 51 40 31 25 33 26 21 27 21 17 21 17 13 10 130-140 1852.83 90-120 13058.07 29.7 32.0 6 51 38 29 23 47 35 27 21 29 23 18 24 18 14 18 14 11 8 140-150 185.86 90-130 16136.25 36.7 39.6 7 47 34 25 20 43 31 24 18 26 20 15 21 16 12 17 12 9 7 150-160 14.88 90-150 18174.93 41.3 44.6 8 44 31 22 17 40 28 21 16 24 17 13 19 14 10 15 11 8 6 160-170 1.78 90-180 18191.71 41.3 44.6 9 41 28 20 15 37 26 18 14 21 15 11 18 13 9 14 10 7 5 170-180 0.12 0-180 92.6 100.0 10 38 25 18 13 35 23 16 12 20 14 10 16 11 8 13 6 4 Zone 40749.78 9 Lumens Total Luminaire Efficiency = 81.4% 0-10 561.93 CIE Type - Direct 10-20 1748.92 20-30 2859.54 30-40 4018.21 0-180 1.76 Coefficients of Utilization - Zonal Cavity Method 40-50 5254.58 90-270 1.76 Effective Floor Cavity Reflectance 0.20 50-60 5772.38 Diagonal 1.86 60-70 6052.84 70-80 5887.04 80-90 3512.71 90-100 137.17 0-30 5170.39 11.8 14.4 2 74 65 58 51 72 63 57 51 60 54 49 57 52 48 55 51 47 45 100-110 0.00 0-40 9188.60 20.9 25.7 3 66 55 47 40 64 54 46 40 51 44 39 49 43 38 46 42 37 35 110-120 0.00 0-60 20215.55 45.9 56.5 4 60 48 39 32 58 47 39 32 44 37 32 42 36 31 40 35 31 28 120-130 0.00 0-90 35668.14 81.1 99.6 5 55 42 33 27 53 41 33 27 39 32 26 37 31 26 36 30 26 24 130-140 0.00 90-120 137.17 0.3 0.4 6 50 37 29 23 48 36 28 23 35 28 22 33 27 22 32 26 22 20 140-150 0.00 90-130 137.17 0.3 0.4 7 46 33 25 20 44 33 25 19 31 24 19 30 24 19 29 23 19 17 150-160 0.00 90-150 137.17 0.3 0.4 8 43 30 22 17 41 30 22 17 28 22 17 27 21 17 26 21 17 15 160-170 0.00 90-180 137.17 0.3 0.4 9 40 28 20 15 38 27 20 15 26 19 15 25 19 15 24 19 15 13 170-180 0.00 0-180 35805.32 81.4 100.0 10 37 25 18 13 36 25 18 13 24 18 13 23 17 13 22 17 13 12 992 REPORT NUMBER: KP40PST Lamps: 400 W Pulse Start Metal Halide with Standard Dome Reflector * Spacing Criteria Plane % Ceiling Rcc % Walls Lumens 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 97 97 97 97 95 95 95 95 90 90 90 86 86 86 83 83 83 81 Zonal Lumen Summary Zone 80 % Lamp % Fixture 1 84 78 73 68 81 76 71 67 72 69 65 69 66 63 66 63 61 59 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III 400 Luminaire Photometric Data 400 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 400-watt clear Pulse Start Metal Halide lamp (44,000 lumen). Zone For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 320 W (33,000 lumen) PSMH lamp – .750; for a 350 W (37,000 lumen) PSMH lamp – .840. For candlepower values of fixture with guard, multiply by – 0.95. Lumens Total Luminaire Efficiency = 76% 0-10 499.96 CIE Type - Direct 10-20 1605.38 20-30 2680.72 30-40 3841.49 0-180 2.28 Coefficients of Utilization - Zonal Cavity Method 40-50 4899.23 90-270 1.92 Effective Floor Cavity Reflectance 0.20 50-60 4819.21 Diagonal 1.84 60-70 4564.58 70-80 4063.65 80-90 3258.13 90-100 2105.14 100-110 762.24 110-120 138.12 0-30 120-130 77.59 130-140 73.07 140-150 150-160 Spacing Criteria Plane % Ceiling Rcc % Walls 80 70 50 30 Lighting REPORT NUMBER: KP40PAN Lamps: 400 W Pulse Start Metal Halide with 30° Angle Dome Reflector * 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 1 78 72 68 64 75 70 66 62 65 62 59 61 58 56 57 55 53 50 2 69 61 55 49 66 59 53 48 55 50 46 51 47 43 48 44 41 39 Zonal Lumen Summary Zone Lumens % Lamp % Fixture 3 62 52 45 39 59 51 44 38 47 41 37 44 39 35 41 37 33 31 4786.06 10.9 14.3 4 56 46 38 32 54 44 37 31 41 35 30 38 33 29 36 31 28 26 0-40 8627.55 19.6 25.8 5 51 40 33 27 49 39 32 26 36 30 25 34 29 24 32 27 23 21 0-60 18345.99 41.7 54.9 6 47 36 28 23 45 35 28 22 32 26 22 30 25 21 29 24 20 18 25.07 0-90 30232.35 68.7 90.4 7 43 32 25 20 42 31 24 19 29 23 19 27 22 18 26 21 17 16 10.91 90-120 3005.49 6.8 9.0 8 40 29 22 17 39 28 22 17 27 21 16 25 20 16 24 19 15 14 160-170 5.30 90-130 3083.09 7.0 9.2 9 37 26 20 15 36 26 19 15 24 19 15 23 18 14 22 17 14 12 170-180 1.45 90-150 3181.23 7.2 9.5 10 35 24 18 14 34 24 17 13 22 17 13 21 16 13 20 15 12 11 90-180 3198.89 7.3 9.6 0-180 33431.25 76.0 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 993 Lighting: Enclosed and Gasketed — Area — HID 0 89 89 89 89 86 86 86 86 80 80 80 75 75 75 71 71 71 69 Mercmaster™ III 400 Luminaire Photometric Data 400 W PSMH Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 400-watt clear Pulse Start Metal Halide lamp (44,000 lumen). Lighting: Enclosed and Gasketed — Area — HID Lighting Zone Lumens For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 320 W (33,000 lumen) PSMH lamp – .750; for a 350 W (37,000 lumen) PSMH lamp – .840. For candlepower values of fixture with guard, multiply by – 0.95. Total Luminaire Efficiency = 78.4% REPORT NUMBER: KP40PJ5 Lamps: 400 W Pulse Start Metal Halide with 8” Prismatic Glass Refracter - NEMA Type V * CIE Type - Semi-Direct 0-10 77.24 10-20 575.14 20-30 1061.45 30-40 1581.40 0-180 1.36 40-50 4468.52 90-270 1.40 50-60 4938.88 Diagonal 2.42 60-70 6338.26 70-80 5875.90 80-90 3886.90 90-100 1318.17 0-30 1713.83 3.9 5.0 1 77 71 66 61 73 68 63 59 62 58 54 57 53 50 52 49 47 44 100-110 1872.98 0-40 3295.23 7.5 9.6 2 67 58 50 44 64 55 48 42 50 44 39 45 41 37 41 37 34 31 110-120 1122.17 0-60 12702.64 28.9 36.8 3 59 48 40 33 56 46 38 32 42 35 30 38 32 27 34 29 25 23 120-130 616.83 0-90 28803.69 65.5 83.5 4 53 41 33 26 50 39 31 25 35 29 23 32 26 21 29 24 20 17 130-140 358.56 90-120 4313.33 9.8 12.5 5 48 36 27 21 45 34 26 20 31 24 18 28 22 17 25 20 16 13 140-150 224.03 90-130 4930.15 11.2 14.3 6 44 31 23 17 41 30 22 16 27 20 15 24 18 14 22 17 13 11 150-160 128.38 90-150 5512.75 12.5 16.0 7 40 28 20 14 38 26 19 14 24 17 13 22 16 12 19 14 11 9 160-170 50.79 90-180 5699.61 13.0 16.5 8 37 25 17 12 35 24 17 11 22 15 11 19 14 10 18 13 9 7 170-180 7.69 0-180 34503.3 78.4 100.0 9 34 22 15 10 32 21 15 10 20 13 Spacing Criteria Plane Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Floors Rfc % Ceiling Rcc Zonal Lumen Summary Zone Lumens % Walls 20 80 70 30 9 30 20 13 9 18 12 8 16 11 8 6 8 16 11 7 15 10 7 5 Total Luminaire Efficiency = 64.2% 0-10 514.26 CIE Type - Direct 10-20 1734.49 20-30 3370.99 30-40 5333.06 0-180 2.32 Coefficients of Utilization - Zonal Cavity Method 40-50 7165.13 90-270 2.32 Effective Floor Cavity Reflectance 0.20 50-60 6195.93 Diagonal 2.04 60-70 2879.28 70-80 921.95 80-90 111.28 REPORT NUMBER: KP40PHB Lamps: 400 W Pulse Start Metal Halide with Enclosed Reflector (KPR-4HB) * Spacing Criteria % Floors Rfc % Ceiling Rcc Zonal Lumen Summary Zone Lumens 0 9 18 12 Lumens Plane 10 0 90 90 90 90 87 87 87 87 80 80 80 74 74 74 68 68 68 65 % Lamp % Fixture 10 32 20 14 Zone 50 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 % Walls % Lamp % Fixture 20 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 76 76 76 76 75 75 75 75 71 71 71 68 68 68 65 65 65 64 90-100 0.14 0-30 5619.74 12.8 19.9 1 70 67 65 63 69 66 64 62 63 61 60 61 59 58 59 57 56 55 100-110 0.00 0-40 10952.81 24.9 38.8 2 64 59 55 51 62 58 54 50 55 52 49 53 51 48 51 49 47 46 110-120 0.00 0-60 24313.86 55.3 86.1 3 58 51 46 42 56 50 46 42 48 44 41 47 43 40 45 42 40 38 120-130 0.00 0-90 28226.37 64.2 100.0 4 53 45 39 35 51 44 39 35 43 38 34 41 37 34 40 36 33 32 130-140 0.00 90-120 0.14 0.0 0.0 5 48 40 34 30 47 39 34 29 38 33 29 36 32 29 35 31 28 27 140-150 0.00 90-130 0.14 0.0 0.0 6 44 35 29 25 43 35 29 25 34 29 25 32 28 25 31 28 24 23 150-160 0.00 90-150 0.14 0.0 0.0 7 41 32 26 22 39 31 26 22 30 25 22 29 25 21 28 24 21 20 160-170 0.00 90-180 0.14 0.0 0.0 8 37 29 23 19 36 28 23 19 27 22 19 26 22 19 26 22 19 17 170-180 0.00 0-180 28226.50 64.2 100.0 9 35 26 20 17 34 25 20 17 25 20 17 24 20 16 23 19 16 15 10 32 24 18 15 32 23 18 15 23 18 15 22 18 15 21 17 15 13 994 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 Applications Lighting Low Profile Ceiling Mount with Prismatic Globe and Optional Guard 50-200 Watt 25° Stanchion Mount with Prismatic Globe 50-200 Watt 90° Stanchion Mount with Prismatic Globe and Optional Guard 400 Watt Straight Stanchion Mount with Prismatic Glass Globe and Optional Guard Features • Power supply 230/240 V (+6% - 10%) 50 Hz. • Instant relighting with auxiliary halogen lamps, depending on model (lamps not supplied). • Fast relighting for 70 W and 150 W sodium: 5 to 30 seconds depending on the duration of the mains power supply failure. • Connection via terminal block (0.003 x 0.006 in2 / 2 x 4 mm2 max.). • Superior corrosion-resistance: copperfree die-cast mounting hoods, ballast housing and guards have a gray epoxy powder coat, electrostatically applied for complete and uniform protection. • Wide choice of light sources: high pressure sodium, metal halide, mercury vapor and incandescent. • Six mounting arrangements to suit any lighting layout – pendant, ceiling, wall bracket, angled or straight stanchion and pendant cone (for dust applications). • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360° compression at all points on ballast housing gasket for positive sealing. Swing away design of captive bolt and nut simplifies servicing. • All fixtures designed to perform in a -40 °F/-40 °C ambient temperature up to 131 °F/55 °C. • Standard dome or 30° angle reflectors made of fiberglass reinforced white polyester. Highly resistant to corrosive atmospheres and vented to improve fixture cooling characteristics. • Fixture housing mounting hoods and guards are die-cast copperfree aluminum with epoxy powder coat finish. • All exposed hardware is stainless steel and captive. Stainless thread inserts in the ballast bodies prevent “freezing” of the screws that affix guards and reflectors, simplifying removal for service. • One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life. • Fixture bodies are provided with two silicone rubber O-Ring style gaskets that will stay flexible and assure even compression around their circumference. They easily withstand high temperatures, moisture, dirt and dust for worry free operation. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Standard Materials • Mounting hoods and ballast bodies: die-cast copperfree (4/10 of 1% max.) aluminum • Hardware and catch assemblies: stainless steel • Globe: heat and impact resistant internally fluted glass • Gasket: high temperature silicon • Reflector: fiberglass reinforced polyester • Guards: polyester powder coat finished cast copperfree aluminum (LN1 and LN2 sizes) or stainless steel (LN3 and LN4 sizes) Standard Finishes • Mounting hoods, ballast bodies and guards: epoxy powder coat finish, electrostatically applied for complete, uniform surface protection • Reflectors: white polyester finish 995 Lighting: Enclosed and Gasketed — Area — HID • Enclosed and gasketed fixtures suitable for use in: — Marine and wet locations — Areas where flammable gases, vapors or combustible dusts are present under conditions defined by the IEC as Zone 2 and 22 — Applications where energy efficient, high lumen output is required — Non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust, corrosive atmosphere or high ambient temperatures are encountered • Typical applications include: — Pulp and paper mills — Processing plants — Chemical plants — Oil refineries — Foundries — Manufacturing plants — Storage areas — Waste and sewage treatment — Other areas where dust, water, dirt and rough usage are a problem LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 Lighting: Enclosed and Gasketed — Area — HID Lighting Certifications and Compliances • • • • • • Gas: Certification Type LN — Zone 2 — Conforming to ATEX 94/9/CE: CE II3 G — ATEX/IEC Protection: Ex nR II — Ambient Temperature: 104 °F/40 °C to 131 °F/55 °C — CE Declaration of Conformity: 50217 — ATEX Certificate: LCIE 08 ATEX 6036X — IEC Certificate: LCIE Ex 08.003X — Other Certifications: GOST Dust: Certification Type LN — Zone 22 — Conforming to ATEX 94/9/CE: CE II3 D — ATEX/IEC Protection: Ex tD A22 — Ambient Temperature: 104 °F/40 °C to 131 °F/55 °C — CE Declaration of Conformity: 50217 — ATEX Certificate: LCIE 08 ATEX 6036X — IEC Certificate: LCIE Ex 08.003X — Other Certifications: GOST Ex standards :EN / IEC 60079-0; 60079-15; 61241-0; 61241-1 Product standards: EN / IEC 60598-1 EMC standards: EN / IEC 55015; 61547 Other standards: EN / IEC 60529 (IP) Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide for LN Series Luminaires LN 1 Series: LN - LN Series Zone 2, 22 ATEX/IEC Certified A Mounting: A - Pendant (Rigid Mounting) C - Ceiling D - Pendant Cone F - Pendant (Flexible Mounting) R - Straight Stanchion S - 25° Stanchion W - Wall Body Size: 1 - Size 1 (MLBG) 2 - Size 2 (KPB) 3 - Size 3 (KPBR) 4 - Size 4 (KPB400) 996 H 70 A Lamp Wattage: 70 - 70 W 80 - 80 W 85 - 85 W Induction only 10 - 100 W 12 - 125 W 15 - 150 W 25 - 250 W 40 - 400 W Lamp Type: H - Metal Halide L - Sodium M - Mercury Vapor Q - Induction Z - Halogen/ Incandescent G2 XA Globe: G2 - Glass Globe VPGL-2HR G4 - Glass Globe VPGL-4HR Hub Size: A - M20 2 - 3/4" NPT 3 - 1" NPT 4 - 1-1/4" NPT 5 - 1-1/2" NPT P Options: P - PTFE Coating Voltage (Magnetic Ballast): XA - 220 Vac 50 Hz XJ - 230/240 Vac 50 Hz Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 T Rating for Zone 2 Locations Not available for Zone 22 locations Zone 2 T Rating Ambient Temperatures Lighting Zone 22 Surface Temperature for Ambient T° = +131 °F/+55°C Dust Surface Cable +122 °F/+50°C +131 °F/+55°C T Rating T4 T4 T4 235 °F/113 °C — 100 W HPS T Rating T4 T3 T3 289 °F/143 °C — 100 W Incandescent T Rating T4 T3 T3 289 °F/143 °C — 100 W Halogen T Rating T4 T3 T3 289 °F/143 °C — 125 W Mercury T Rating T4 T3 T3 289 °F/143 °C — 150 W HPS T Rating T4 T3 T3 289 °F/143 °C — 150 W Halide T Rating T4 T3 T3 289 °F/143 °C — 150 W Incandescent T Rating T4 T3 T3 289 °F/143 °C — 150 W Halogen T Rating T4 T3 T3 289 °F/143 °C — 250 W HPS T Rating T4 T4 T3 279 °F/137 °C — 250 W Halide T Rating T4 T3 T3 289 °F/143 °C — 250 W Mercury T Rating T4 T3 T3 289 °F/143 °C — T Rating T3 T3 T3 Cable T° – 183 °F/84 °C 192 °F/89 °C 333 °F/167 °C 192 °F/89 °C 340 °F/171 °C 189 °F/87 °C 340 °F/171 °C 192 °F/89 °C 400 W HPS 400 W Halide 400 W Mercury T Rating T3 T3 T3 Cable T° – 180 °F/82 °C 189 °F/87 °C T Rating T3 T3 T3 Cable T° – 183 °F/84 °C 192 °F/89 °C “T” Numbers Represent the Maximum Lamp Temperature Locations and Maximum Surface Temperature Under Dust Blanket. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 997 Lighting: Enclosed and Gasketed — Area — HID +104 °F/+40°C 70 W HPS LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 Lamp Type Cable Entry Lamp Watts Lampholder Weight Lbs/kg Volume (in3/dm3) Catalog Number 70 E27 16.31/7.4 2379.93/39 LN1AL702G2XJ 100 E40 19.84/9.0 3356.31/55 LN2AL102G2XJ 150 E40 19.84/9.0 3356.31/55 LN2AL152G2XJ 250 E40 35.27/16.0 4271.66/70 LN3AL252G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4AL402G4XJ Lighting Pendant Lighting: Enclosed and Gasketed — Area — HID HPS 1 x 3/4” NPT Pendant Cone HPS 1 x 3/4” NPT 70 E27 16.31/7.4 2379.93/39 LN1DL702G2XJ 100 E40 19.84/9.0 3356.31/55 LN2DL102G2XJ 150 E40 19.84/9.0 3356.31/55 LN2DL152G2XJ 250 E40 35.27/16.0 4271.66/70 LN3DL252G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4DL402G4XJ Ceiling HPS 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 70 E27 16.31/7.4 2379.93/39 LN1CL70AG2XJ 100 E40 19.84/9.0 3356.31/55 LN2CL10AG2XJ 150 E40 19.84/9.0 3356.31/55 LN2CL15AG2XJ 250 E40 35.27/16.0 4271.66/70 LN3CL25AG4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4CL40AG4XJ Wall HPS 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 70 E27 16.31/7.4 2379.93/39 LN1WL70AG2XJ 100 E40 19.84/9.0 3356.31/55 LN2WL10AG2XJ 150 E40 19.84/9.0 3356.31/55 LN2WL15AG2XJ 250 E40 35.27/16.0 4271.66/70 LN3WL25AG4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4WL40AG4XJ 25° Angled Stanchion HPS 1 x1- 1/4” NPT 70 E27 16.31/7.4 2379.93/39 LN1SL704G2XJ 100 E40 19.84/9.0 3356.31/55 LN2SL104G2XJ 150 E40 19.84/9.0 3356.31/55 LN2SL154G2XJ 250 E40 35.27/16.0 4271.66/70 LN3SL254G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4SL404G4XJ Straight Stanchion HPS 998 1 x1- 1/4” NPT 70 E27 16.31/7.4 2379.93/39 LN1RL704G2XJ 100 E40 19.84/9.0 3356.31/55 LN2RL104G2XJ 150 E40 19.84/9.0 3356.31/55 LN2RL154G2XJ 250 E40 35.27/16.0 4271.66/70 LN3RL254G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4RL404G4XJ Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 Lamp Type Cable Entry Lamp Watts Lampholder Weight Lbs/kg Volume (in3/dm3) Catalog Number 100 E27 16.31/7.4 2379.93/39 LN1AZ102G2 150 E27 16.31/7.4 2379.93/39 LN1AZ152G2 100 E27 16.31/7.4 2379.93/39 LN1DZ102G2 150 E27 16.31/7.4 2379.93/39 LN1DZ152G2 Pendant Inc./ Halogen 1 x 3/4” NPT Inc./ Halogen 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 100 E27 16.31/7.4 2379.93/39 LN1CZ10AG2 150 E27 16.31/7.4 2379.93/39 LN1CZ15AG2 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 100 E27 16.31/7.4 2379.93/39 LN1WZ10AG2 150 E27 16.31/7.4 2379.93/39 LN1WZ15AG2 100 E27 16.31/7.4 2379.93/39 LN1SZ104G2 150 E27 16.31/7.4 2379.93/39 LN1SZ154G2 100 E27 16.31/7.4 2379.93/39 LN1RZ104G2 150 E27 16.31/7.4 2379.93/39 LN1RZ154G2 Pendant Cone Ceiling Wall Inc./ Halogen 25° Angled Stanchion Inc./ Halogen 1 x1- 1/4” NPT Inc./ Halogen 1 x1- 1/4” NPT Straight Stanchion Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 999 Lighting: Enclosed and Gasketed — Area — HID 1 x 3/4” NPT Lighting Inc./ Halogen LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 Lamp Type Lamp Watts Lampholder Weight Lbs/kg 150 E27 16.31/7.4 250 E40 30.86/14.0 4271.66/70 LN3AM252G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4AM402G4XJ 150 E27 16.31/7.4 2379.93/39 LN1DM122G2XJ 250 E40 30.86/14.0 4271.66/70 LN3DM252G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4DM402G4XJ 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 150 E27 16.31/7.4 2379.93/39 LN1CM12AG2XJ 250 E40 30.86/14.0 4271.66/70 LN3CM25AG4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4CM40AG4XJ 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 150 E27 16.31/7.4 2379.93/39 LN1WM12AG2XJ 250 E40 30.86/14.0 4271.66/70 LN3WM25AG4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4WM40AG4XJ 150 E27 16.31/7.4 2379.93/39 LN1SM124G2XJ 250 E40 30.86/14.0 4271.66/70 LN3SM254G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4SM404G4XJ 150 E27 16.31/7.4 2379.93/39 LN1RM124G2XJ 250 E40 30.86/14.0 4271.66/70 LN3RM254G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4RM404G4XJ Cable Entry Volume (in3/dm3) Catalog Number Lighting: Enclosed and Gasketed — Area — HID Lighting Pendant MV 1 x 3/4” NPT 2379.93/39 LN1AM122G2XJ Pendant Cone MV 1 x 3/4” NPT Ceiling MV Wall MV 25° Angled Stanchion MV 1 x 1-1/4” NPT Straight Stanchion MV 1000 1 x 1-1/4” NPT Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 LN Series Wellglass Luminaires Zone 2 and 22 Zone 2 and 22 II 3 GD ATEX / IEC IP66 Lamp Type Cable Entry Lamp Watts Lampholder Weight Lbs/kg Volume (in3/dm3) Catalog Number 150 E40 19.84/9.0 3356.31/55 LN2AH152G2XJ 4271.66/70 LN3AH252G4XJ Pendant 1 x 3/4” NPT 250 E40 35.27/16.0 400 E40 41.89/19.0 5199.22/85.2 LN4AH402G4XJ 1 x 3/4” NPT 150 E40 19.84/9.0 3356.31/55 LN2DH152G2XJ 250 E40 35.27/16.0 4271.66/70 LN3DH252G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4DH402G4XJ Ceiling MH 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 150 E40 19.84/9.0 3356.31/55 LN2CH15AG2XJ 250 E40 35.27/16.0 4271.66/70 LN3CH25AG4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4CH40AG4XJ Wall MH 5 x 1” NPT with: - 4 x 1” NPT fitted plugs - 2 x 1” NPT-M20 adaptors - 2 x M20 plugs 150 E40 19.84/9.0 3356.31/55 LN2WH15AG2XJ 250 E40 35.27/16.0 4271.66/70 LN3WH25AG4XJ 400 E40 41.89/19.0 150 E40 19.84/9.0 5199.22/85.2 LN4WH40AG4XJ 25° Angled Stanchion MH 1 x 1-1/4” NPT 250 E40 35.27/16.0 400 E40 41.89/19.0 3356.31/55 LN2SH154G2XJ 4271.66/70 LN3SH254G4XJ 5199.22/85.2 LN4SH404G4XJ Straight Stanchion MH 1 x 1-1/4” NPT Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 150 E40 19.84/9.0 3356.31/55 LN2RH154G2XJ 250 E40 35.27/16.0 4271.66/70 LN3RH254G4XJ 400 E40 41.89/19.0 5199.22/85.2 LN4RH404G4XJ 1001 Lighting: Enclosed and Gasketed — Area — HID Pendant Cone MH Lighting MH LN Series Wellglass Luminaires Zone 2 and 22 Item Description Catalog Number White Polyester Reflectors — Furnished with stainless steel screws Lighting For Globe Fixtures – LN1 and LN2 sizes Standard Dome KR2-ST 30° Angle KR2-AN For Glass Refractor Fixtures † – LN3 and LN4 sizes Lighting: Enclosed and Gasketed — Area — HID Standard Dome 30° Angle Standard Dome CMR-4ST 30° Angle CMR-4AN Aluminum KRGU2 Guards For Globe Fixtures – LN1 and LN2 sizes For Glass Refractor Fixtures † – LN3 and LN4 sizes Stainless Steel Globe Guard KPGU400 Globe Guard † Fixtures with refractors are not UL Listed when used with reflectors. 1002 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 LN Series Wellglass Luminaires Zone 2 and 22 Ballast Body with Globe LN2 LN3 LN4 13.52”/346.0 mm 13.52”/346.0 mm Fix. 12.68”/322.0 mm Fix. 12.68”/322.0 mm Fix. 12.68”/322.0 mm 20.50”/520.7 mm 16.73”/425.0 mm 10.83”/275.0 mm 13.52”/346.0 mm Fix. 12.68”/322.0 mm Lighting: Enclosed and Gasketed — Area — HID 11.61”/295.0 mm 13.52”/346.0 mm Lighting LN1 Mounting Hoods Pendant Pendant Cone 12.06”/306.0 mm Ceiling 12.06”/306.0 mm 1.17”/ 30.0 mm 13.62”/346.0 mm 5.59”/ 142.0 mm 12.06”/306.0 mm 1.75”/ 45.0 mm 5.00”/ 127.0 mm 0.375”/ 9.5 mm Dia. (+DFT) 2.00”/ 50.8 mm Dia. (+DFT) 0.56”/ 14.3 mm Dia. (+DFT) 2.50”/ 63.5 mm Dia. (+DFT) Wall 17.01”/ 432.0 mm 10.94”/ 278.0 mm 25° Stanchion 3.38”/ 85.8 mm 90° Stanchion 17.23”/438.0 mm (4) Mounting Holes 0.31”/8.0 mm 4.06”/ 103.0 mm 12.05”/ 306.0 mm 2.00”/ 51.0 mm 15.28”/ 388.0 mm 9.79”/249.0 mm 9.25”/ 235.0 mm 12.05”/ 306.0 mm 12.06”/306.0 mm 7.60”/ 193.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1003 LN Series Wellglass Luminaire Photometric Data Zone 2 and 22 Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 Longitudinal Transverse High Pressure Sodium Lighting 70 W HP Sodium Efficiency 74.6% Lighting: Enclosed and Gasketed — Area — HID Degrees 150 W HP Sodium Efficiency 87.3% 250 W HP Sodium Efficiency 89.1% Degrees Degrees Degrees 400 W HP Sodium Efficiency 82.3% Metal Halide 150 W Metal Halide Efficiency 82.4% 250 W Metal Halide Efficiency 96.2% Degrees Degrees 400 W Metal Halide Efficiency 89.8% Degrees Incandescent or Halogen 150 W HP Incandescent Halogen Efficiency 90.6% Degrees Mercury Vapor 250 W Mercury Vapor Efficiency 76% Degrees 1004 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) Applications • Superior corrosion-resistance: copperfree aluminum mounting hoods, ballasts and guards with epoxy powder coat, inside and out. • Standard pendant mounting hood for rigid or flexible mounting. Balanced round design automatically hangs plumb when used with flexible hanger. • Positive sealing. Hinge and bolt construction assures 360° compression at all points on gasket. • One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life. • Heat barrier isolates capacitor from ballast. Standard non-PCB biodegradable capacitors installed in separate compartment. • Mogul socket is furnished with 392 °F/200 °C welded leads, pre-wired to the ballast. • Porcelain socket assures trouble-free operation in high ambient installations. • Guards protect globes from damage. Keyhole slots allow easy installation and are secured with stainless steel screws. • Prismatic glass globes and glass refractors are standard (plastic refractors also available) and thread directly into fixture housing. Eliminate glare and provide uniform light distribution. • Vented reflectors result in cooler, dirt-free operation, increased lumen output. • Reflectors secured to mounting hood with screws (furnished). • Choice of reflector styles: white porcelain enamel or Fiberglass reinforced polyester; standard dome or 30° angle. • Optional photocell provides automatic “on-off” control. • All Mercmaster mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listings). Standard Materials • Mounting hoods, ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum • Reflectors: fiberglass reinforced polyester • Globes: 50 W-100 W, threaded prismatic glass; 150 W, 175 W and 200W, threaded heat-resistant prismatic glass • Refractors: 50 W to 150 W, heat-resistant prismatic glass and plastic; 175 W to 200 W, prismatic glass Standard Finishes • Mounting hoods, ballast bodies, guards: epoxy powder-coat finish. Two-coat baked finish, electrostatically applied for complete uniform surface protection • Polyester reflectors: natural finish Options • Fuses for fixtures. For fuse kits see Electrical Specifications and Fuse Kits page. • MH fixtures for Quartz Auxiliary lamps. Relay switch installed in fixture when specified. Add suffix -MTE to fixture catalog number for 120 V through 277 V, and suffix -480E to fixture catalog number for 480 V fixture. • Smart Hot Restrike emergency option, available for 50 W-150 W HPS only. Add suffix -SR. See 50 W, 70 W, 100W, 150 W HPS page. • Hot Restrike option add suffix -R. • Smart Starter available for HPS and PSMH. Add suffix -S. Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10444 † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. Note: Fixtures equipped with optional photocell or quartz auxilliary lamp do not comply with UL requirements and are not suitable for use in classfied locations. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1005 Lighting: Enclosed and Gasketed — Area — HID Features Lighting • Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries, manufacturing plants, power plants and other locations where moisture, dirt, dust or corrosive atmospheres are encountered. • Fixtures suited for Class I, Division 2; Class II, Division 1 and 2; and Class III. Suitable for use in wet and outdoor saltwater locations. • Wide range of wattages and voltages. Choice of ballasts for 100 W-200 W PSMH; and 50 W-150 W HPS lamps in 120, 208, 240, 277 and 480 voltages. • Choice of light sources: high pressure sodium and pulse start metal halide. • Choice of optical assembles: (1) prismatic globe with or without guard through 200 W; or (2) Type V closed prismatic glass refractor through 200 W. (Types II, III and IV also available through 200 W. Also polycarbonate globes for 100 W max.) • Choice of mounting hoods: pendant (rigid or flexible), 25° (angle) stanchion, ceiling and wall mounting. • Porcelain reflector for standard applications and Fiberglass reinforced polyester reflector for installations where luminaire is subject to exceptionally severe corrosive atmospheres. Mercmaster™ II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) Lighting: Enclosed and Gasketed — Area — HID Lighting Illustrated Features High Temperature Sockets Mogul base high temperature socket for 50W through 400W HID lamps. Aluminum Inner Reflector Solid aluminum inner reflector improves photometric efficiency. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Hood/Ballast Gasket Silicone rubber gasket seals out moisture, dirt and dust. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Fiber insulator protects ballast and capacitor. Photocell Installs through knock-out in mounting hood; provides continuous ON-OFF duskto-dawn control. Fixtures with optional photocell or quartz auxiliary lamp do not comply with UL requirements for use in classified locations. JB Series Box and Flexible Hanger Balanced Round Design Pendant fixtures automatically hang plumb. Fixtures and hangers suitable for Class I, Division 2 applications. Fuses Mount to Hood Bosses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. 1006 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) The quartz emergency lamp socket is wired to a 120 V tap on the ballast and is therefore independent of the lighting fixture voltage. No special field wiring is necessary. Description Catalog Suffix For fixture volts of 120, 208, 240 or 277 -MTE For fixture volts of 480 -480E The hot lamp restart option provides instant restart of 50, 70, 100 and 150 W HPS lamps after power outages of up to 10 seconds. The lamps restrike instantly at almost full lumens. For power interruptions of up to 30 seconds, the restart of the high pressure sodium lamp is also instant but at less than full lumens. The hot lamp restart accessory does not accelerate cold lamp start up or starting where the power outage is of a duration which has allowed the HPS lamp to cool. Encapsulated HPS Smart Hot Restrike Ignition Accessory Additional Advantages of the Smart Hot Restrike: • Protects against self destruction in the event of failed, missing or broken lamps, or socket or lead wire failure. • Prevents “End of Life” lamps from continuous cycling over long periods of time. • Remains unaffected by stray voltages, moderate overvoltages, as well as undervoltage conditions. • Drops into the background during normal lamp operation with exceptionally low insertion loss. • Fully encapsulated construction assures electrical integrity and mechanical vibration protection. • UL recognized component. Description For fixture watts of 50, 70, 100 or 150 (HPS only) Accessory Options Catalog Suffix -SR Guards: Guards are die-cast copperfree aluminum with baked epoxy finish to match fixtures. Fixture supplied with stainless steel mounting screws which thread into stainless steel inserts on fixture housing to attach guard. To order fixture with guard, add suffix -G to catalog number before adding voltage suffix. Reflectors: Standard dome and 30° angle polyester reflectors. Hot Restrike: Instantly restrikes a hot HPS lamp when power is restored after a momentary outage. Available factory-installed only. To order, add suffix -R to catalog number. Quartz Emergency Light: When ordered, HPS fixtures will be supplied with a prewired special DC bayonet base socket to accept a 150W, 120V quartz lamp (not furnished) that automatically switches on when a power outage occurs. Fixtures ordered with this quartz emergency lamp feature do NOT comply with requirements for classified areas and should be used only in non-classified locations. To order, add suffix -E to catalog number and specify if a relay switch is desired. Photocell and Fuses: Photocontrol. Smart Starter: Performs as a conventional starter in lamp start-up. Removes itself from circuit at end of lamp life or if lamp is out of socket. Add suffix -S to catalog number. Smart Hot Restrike (HPS only): Will immediately restrike HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps. Add suffix -SR to catalog number. † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. * NOTE: Fixtures equipped with quartz emergency light do not comply with UL requirements and are not suitable for use in classified locations. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1007 Lighting: Enclosed and Gasketed — Area — HID HPS Smart Hot Restrike Accessory for HPS Fixtures Mercmaster fixtures for high pressure sodium lamps can be supplied with a special ignitor (starter board). It instantly restrikes a hot high pressure sodium lamp when a momentary power interruption occurs. This special ignitor, supplied in place of the standard ignitor, is a potted solid state device, totally factory installed. It is not suitable for field installation. Lighting Quartz Emergency Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures * Mercmaster fixtures for or metal halide and high pressure sodium lamps can be supplied with a socket to accept a 150 W 120 V quartz lamp. This D.C. bayonet base socket is in addition to the standard lamp socket. In the event of a momentary power interruption, the quartz lamp is automatically switched on. The single ended quartz lamp remains energized until the HID restrikes and reaches about 60% output. Mercmaster™ II HID Luminaire Thermal Suitability Class I, Division 2, Groups A, B, C, D; Class II, Division 1, Groups E, F, G UNILETS® for Use with Threaded Metal Conduit. Lighting Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) The following table shows maximum operating temperatures of Mercmaster fixtures for Class I, Division 2, in a 104 °F/ 40 °C ambient in free air as rated by UL. As shown, the higher the Temperature Identification Number, the cooler the fixture operates. Keep this in mind when selecting a fixture for a specific chemical listed on the Classified Area Suitability pages. Per the NEC. The temperature marking shown on fixtures shall not exceed the ignition temperature of the gas to be encountered. To illustrate, a 400W HPS fixture, which has a UL-NEC Temperature Identification Number of 350 (619-662 °F/326-350/°C) does NOT exceed the Group D Methane (natural gas) ignition temperature of 1004 °F/ 540 °C, and is therefore suitable for use in atmospheres containing that chemical. Mercmaster II Thermal Suitability Watts Type Supply Wire Temp. (°F/°C) 50 HPS 194/90 104/40 T3 T3 T3A T3A T3B T3B T3B T3B 70 HPS 194/90 104/40 T3 T3 T3A T3A T3B T3B T3B T3B 100 HPS 194/90 104/40 T2C T2C T3 T3 T3B T3B T3B T3B 150 HPS 194/90 104/40 T2A T2A T2B T2B ➊ ➊ ➊ T3B 150 PSMH 194/90 104/40 T2B T2B T2D T2D — — — — 175 PSMH 194/90 104/40 T2B T2B T2C T2C — — — — 200 PSMH 194/90 104/40 T2 T2 T2B T2B — — — — Lighting: Enclosed and Gasketed — Area — HID Lamp Class I, Division 2, Groups A, B, C, D Class II, Division 1, Groups E, F G Ambient Temp. (°F/°C) Globe Globe & Reflector 8” Refractor 12” Refractor Globe Globe & Reflector 8” Refractor 12” Refractor “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 All HPS fixtures suitable for operation at -40 °F/-40 °C; PSMH at -20 °F/-29 °C. † For specific Class I suitability of each fixture listed, see Thermal Suitability above. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ Pendant, ceiling and wall mount are suitable for groups E and F only with T3A rating. Stanchion mount is suitable for groups E, F and G with a T3B rating. 1008 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaires 50 W, 70 W, 100 W, 150 W HPS High Power Factor (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) With Globe, With 8” Refractor Lamp Less Guard (NEMA V) Watts Pendant — One Hub, Rigid or Flexible Mounting 70 100 3/4 LPAL5075 ➌ LPAL5075J ➌ LPAL5075R ➌ 1 LPAL5010 ➌ LPAL5010J ➌ LPAL5010R ➌ 3/4 LPAL7075 ➍ LPAL7075J ➍ LPAL7075R ➍ 1 LPAL7010 ➍ LPAL7010J ➍ LPAL7010R ➍ 3/4 LPAL1075 ➍ LPAL1075J ➍ LPAL1075R ➍ 1 LPAL1010 ➍ LPAL1010J ➍ LPAL1010R ➍ 3/4 LPAL1575 ➍ LPAL1575J ➍ LPAL1575R ➍ 1 LPAL1510 ➍ LPAL1510J ➍ LPAL1510R ➍ 3/4 LPCL5075 ➌ LPCL5075J ➌ LPCL5075R ➌ 1 LPCL5010 ➌ LPCL5010J ➌ LPCL5010R ➌ 3/4 LPCL7075 ➍ LPCL7075J ➍ LPCL7075R ➍ 1 LPCL7010 ➍ LPCL7010J ➍ LPCL7010R ➍ 3/4 LPCL1075 ➍ LPCL1075J ➍ LPCL1075R ➍ With 12” Refractor Ceiling — Five Hubs, Four Close-Up Plugs 50 70 100 150 1 LPCL1010 ➍ LPCL1010J ➍ LPCL1010R ➍ 3/4 LPCL1575 ➍ LPCL1575J ➍ LPCL1575R ➍ 1 LPCL1510 ➍ LPCL1510J ➍ LPCL1510R ➍ 3/4 LPWBL5075 ➌ LPWBL5075J ➌ LPWBL5075R ➌ 1 LPWBL5010 ➌ LPWBL5010J ➌ LPWBL5010R ➌ 3/4 LPWBL7075 ➍ LPWBL7075J ➍ LPWBL7075R ➍ 1 LPWBL7010 ➍ LPWBL7010J ➍ LPWBL7010R ➍ 3/4 LPWBL1075 ➍ LPWBL1075J ➍ LPWBL1075R ➍ 1 LPWBL1010 ➍ LPWBL1010J ➍ LPWBL1010R ➍ 3/4 LPWBL1575 ➍ LPWBL1575J ➍ LPWBL1575R ➍ 1 LPWBL1510 ➍ LPWBL1510J ➍ LPWBL1510R ➍ 1-1/4 LPSL50125 ➌ LPSL50125J ➌ LPSL50125R ➌ 1-1/2 LPSL50150 ➌ LPSL50150J ➌ LPSL50150R ➌ 1-1/4 LPSL70125 ➍ LPSL70125J ➍ LPSL70125R ➍ 1-1/2 LPSL70150 ➍ LPSL70150J ➍ LPSL70150R ➍ 1-1/4 LPSL10125 ➍ LPSL10125J ➍ LPSL10125R ➍ 1-1/2 LPSL10150 ➍ LPSL10150J ➍ LPSL10150R ➍ 1-1/4 LPSL15125 ➍ LPSL15125J ➍ LPSL15125R ➍ 1-1/2 LPSL15150 ➍ LPSL15150J ➍ LPSL15150R ➍ Wall — Five Hubs, Four Close-Up Plugs 50 70 100 150 25° Stanchion — One Hub 50 70 100 150 † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ To order fixture with guard, add suffix -G (before adding voltage suffix). ➋ Furnished with 8” NEMA V refractor — to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). ➌ Add voltage suffix -MT for 120, 208, 240 or 277 V. ➍ Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1009 Lighting: Enclosed and Gasketed — Area — HID 150 With Globe ➊ Lighting 50 Catalog Numbers With 8” Refractor ➋ Hub Size (Inches) Mercmaster™ II HID Luminaires 100 W, 150 W, 175 W, 200 W PSMH Constant Wattage (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) Lighting With Globe, With 8” Refractor Lamp Less Guard (NEMA V) Watts Pendant — One Hub, Rigid or Flexible Mounting 100 150 Lighting: Enclosed and Gasketed — Area — HID 175 ‡ 200 ‡ Hub Size (Inches) With Globe ➊ Catalog Numbers With 8” Refractor ➋ With 12” Refractor 3/4 LPAH1075 ➍ LPAH1075J ➍ LPAH1075R ➍ 1 LPAH1010 ➍ LPAH1010J ➍ LPAH1010R ➍ 3/4 LPAP1575 ➍ LPAP1575J ➍ LPAP1575R ➍ 1 LPAP1510 ➍ LPAP1510J ➍ LPAP1510R ➍ 3/4 LPAP1775 ➍ LPAP1775J ➍ LPAP1775R ➍ 1 LPAP1710 ➍ LPAP1710J ➍ LPAP1710R ➍ 3/4 LPAP2075 ➍ LPAP2075J ➍ LPAP2075R ➍ 1 LPAP2010 ➍ LPAP2010J ➍ LPAP2010R ➍ 3/4 LPCH1075 ➍ LPCH1075J ➍ LPCH1075R ➍ 1 LPCH1010 ➍ LPCH1010J ➍ LPCH1010R ➍ 3/4 LPCP1575 ➍ LPCP1575J ➍ LPCP1575R ➍ 1 LPCP1510 ➍ LPCP1510J ➍ LPCP1510R ➍ 3/4 LPCP1775 ➍ LPCP1775J ➍ LPCP1775R ➍ 1 LPCP1710 ➍ LPCP1710J ➍ LPCP1710R ➍ 3/4 LPCP2075 ➍ LPCP2075J ➍ LPCP2075R ➍ 1 LPCP2010 ➍ LPCP2010J ➍ LPCP2010R ➍ 3/4 LPWBH1075 ➍ LPWBH1075J ➍ LPWBH1075R ➍ 1 LPWBH1010 ➍ LPWBH1010J ➍ LPWBH1010R ➍ 3/4 LPWBP1575 ➍ LPWBP1575J ➍ LPWBP1575R ➍ 1 LPWBP1510 ➍ LPWBP1510J ➍ LPWBP1510R ➍ 3/4 LPWBP1775 ➍ LPWBP1775J ➍ LPWBP1775R ➍ Ceiling — Five Hubs, Four Close-Up Plugs 100 150 175 ‡ 200 ‡ Wall — Five Hubs, Four Close-Up Plugs 100 150 175 ‡ 200 ‡ 1 LPWBP1710 ➍ LPWBP1710J ➍ LPWBP1710R ➍ 3/4 LPWBP2075 ➍ LPWBP2075J ➍ LPWBP2075R ➍ 1 LPWBP2010 ➍ LPWBP2010J ➍ LPWBP2010R ➍ 1-1/4 LPSH1075 ➍ LPSH1075J ➍ LPSH1075R ➍ 1-1/2 LPSH1010 ➍ LPSH1010J ➍ LPSH1010R ➍ 1-1/4 LPSP15125 ➍ LPSP15125J ➍ LPSP15125R ➍ 1-1/2 LPSP15150 ➍ LPSP15150J ➍ LPSP15150R ➍ 1-1/4 LPSP17125 ➍ LPSP17125J ➍ LPSP17125R ➍ 1-1/2 LPSP17150 ➍ LPSP17150J ➍ LPSP17150R ➍ 1-1/4 LPSP20125 ➍ LPSP20125J ➍ LPSP20125R ➍ 1-1/2 LPSP20150 ➍ LPSP20150J ➍ LPSP20150R ➍ 25° Stanchion — One Hub 100 150 175 ‡ 200 ‡ † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ To order fixture with guard, add suffix -G (before adding voltage suffix). ➋ Furnished with 8” NEMA V refractor — to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). ➌ Add voltage suffix -MT for 120, 208, 240 or 277 V. ➍ Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V. 1010 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaires Mounting Hoods and Ballast Bodies High Pressure Sodium and Pulse Start Metal Halide. Mogul Base Hoods and Ballast Housings are Copperfree Aluminum (4/10 of 1%). Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) Mounting Hoods Description Hub Size (Inches) Catalog Number Pendant Lighting 3/4 LPA-75 1 LPA-100 3/4 LPC-75 1 LPC-100 3/4 LPWB-75 1 LPWB-100 One Hub, Rigid or Flexible Mounting Ceiling Wall Five Hubs, Four Close-Up Plugs 25° Stanchion 1-1/4 LPS-125 1-1/2 LPS-150 One Hub Mounting Adapter Permits use of Mercmaster II pendant hood on existing V-51 and Mercmaster I mounting hoods. Remove Mercmaster I ballast body from existing mounting hood, thread in adapter and attach wire to Mercmaster II. LPAD-1 Mercmaster II Ballast Bodies Type Ballast Body Catalog Numbers Globe/12” 8” Refractor Refractor 120V 208V 240V 277V 480V 50 LPB50L LPBLH50R -MT -MT -MT -MT — Lamp Watts Add Voltage Suffixes ➊ High Pressure Sodium High Power Factor (Min. P.F. 90%) 70 LPB70L LPBLH70R -MT -MT -MT -MT -480 100 LPB100L LPBLH100R -MT -MT -MT -MT -480 150 LPB150L LPBLH150R -MT -MT -MT -MT -480 100 LPB100H LPBH100R 150 LPB150P LPBP150R -MT -MT -MT -MT -480 175 LPB175P LPBP175R -MT -MT -MT -MT -480 200 LPB200P LPBP200R -MT -MT -MT -MT -480 Pulse Start Metal Halide Constant Wattage (Min. P.F. 90%) -MTMED -MTMED -MTMED -MTMED -480MED † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. ➊ MT (multi-volt) ballasts can be operated at an input voltage of either 120, 208, 240 or 277 V. 480 ballasts can be operated at input voltage of 480 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1011 Lighting: Enclosed and Gasketed — Area — HID Five Hubs, Four Close-Up Plugs Mercmaster™ II HID Luminaire Accessories High Pressure Sodium and Pulse Start Metal Halide. Mogul Base Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body. Description Catalog Number Lighting: Enclosed and Gasketed — Area — HID Lighting Prismatic Glass Globes Clear Heat-Resistant VPGL-2HR Amber VPGL-2AM Blue VPGL-2BL Green VPGL-2GR Red VPGL-2RE Coated Prismatic Tuff-Skin® Glass Globes For use in areas where fixture is subject to extreme thermal shock Clear Heat-Resistant VPGL-2HRT Polycarbonate Globes – Impact-Resistant ➊ Use 100W Lamp max.; do not use in ambients exceeding 77 °F/25 °C Light Distribution IES/NECA Distribution Curves Clear VPGL-2PL Amber VPGL-2AMPL Green VPGL-2GRPL Red VPGL-2REPL 8” Glass (50-200 W ➊) 12” Glass (50-200 W ➊) 12” Polycarbonate (50-175 W ➋) NEMA I LPG-R1 — — NEMA II — LPRF-2CG LPRF-2CP NEMA III LPG-R3 — LPRF-3CP NEMA IV — — LPRF-4CP NEMA V LPG-R5 LPRF-5CG LPRF-5CP Closed Prismatic Refractors — 50 W-200 W ➊ 8” Refractor 12” Refractor ➊ Polycarbonate globes are shatter-resistant – for use in processing plants, canneries, dairies, bakeries or anywhere broken glass would prove a hazard. Ideally suited for areas where vandalism, high replacement and high maintenance costs are a problem. Do not use in ambients exceeding 77 °F/25 °C. For burning in vertical base-up positions only. Registered trademark of Thomas Manufacturing Corporation, Parkton, Md. It is recommended that guards be used with these globes. ➊ 150 W max. for HPS. ➋ 100 W max. for MH. 1012 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaire Accessories and Weights High Pressure Sodium and Pulse Start Metal Halide. Mogul Base Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body. Description Catalog Number Guard KGU2 Guard for Glass Globe Lighting Steel Guards for 8” and 12” Refractors LPRG2 Guard for 12” Refractor LPBG12 3 machine screws furnished LPRG-2 LPBG-12 Polyester Reflectors Standard Dome Standard Dome KR2-ST 30° Angle KR2-AN 30° Angle Replacement Gaskets — Silicone Rubber Globe and 12” Refractor Gasket VPGL-GK 8” Refractor Gasket KRF-GK Photocell (Hazardous) 120 Volt PC120D2 208 thru 277 Volt PC247D2 Mounting Hood Weights Type Weight (Lbs/Kg) Type Weight (Lbs/Kg) Pendant 3/1.4 Wall 5/2.3 Ceiling 5/2.3 Stanchion 4/1.8 Reflectors and Refractors — Weight includes globe and guard Watts HPS 50, 70 14 — 100 15 15 150 16 175 — 200 PSMH Catalog Wt. Lbs/Kg Number Standard Dome Reflector Catalog Wt. Lbs/Kg Number 30° Angle Reflector LPG-R1 13/5.9 — 5.25/2.4 LPG-R3 13/5.9 16 5.25/2.4 LPG-R5 13/5.9 2.5/1.1 KR2-AN Catalog Wt. Lbs/Kg Number 12” Refractor 5.25/2.4 2.5/1.1 KR2-ST Catalog Wt. Lbs/Kg Number 8” Refractor LPRF-5CG 18 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1013 Lighting: Enclosed and Gasketed — Area — HID Guard for 8” Refractor Mercmaster™ II HID Luminaire Electrical Specifications and Fuse Kits High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Class I, Division 2, Groups A, B, C, D † Class II, Division 1 and 2, Groups E, F, G ‡ Class III Fixtures Outside Type (Salt Water) Fuse Kit Lighting: Enclosed and Gasketed — Area — HID Lighting Electrical Specifications Line Type of Starting Voltage Ballast Amps 50 Watt High Pressure Sodium 120 HX-HPF 0.58 208 HX-HPF 0.35 240 HX-HPF 0.31 277 HX-HPF 0.25 70 Watt High Pressure Sodium 120 HX-HPF 0.90 208 HX-HPF 0.50 240 HX-HPF 0.44 277 HX-HPF 0.35 480 HX-HPF 0.21 100 Watt High Pressure Sodium 120 HX-HPF 1.30 208 HX-HPF 0.76 240 HX-HPF 0.66 277 HX-HPF 0.60 480 HX-HPF 0.33 150 Watt High Pressure Sodium 120 HX-HPF 2.00 208 HX-HPF 1.15 240 HX-HPF 1.00 277 HX-HPF 0.85 480 HX-HPF 0.50 100 Watt Pulse Start Metal Halide 120 HX-HPF 1.20 208 HX-HPF 0.70 240 HX-HPF 0.61 277 HX-HPF 0.55 480 HX-HPF 0.30 150 Watt Pulse Start Metal Halide 120 HX-HPF 1.75 208 HX-HPF 1.30 240 HX-HPF 0.85 277 HX-HPF 0.77 480 C.W.A. 0.45 175 Watt Pulse Start Metal Halide 120 C.W.A. 0.90 208 C.W.A. 0.50 240 C.W.A. 0.35 277 C.W.A. 0.30 480 C.W.A. 0.25 200 Watt Pulse Start Metal Halide 120 C.W.A. 2.10 208 C.W.A. 1.15 240 C.W.A. 1.10 277 C.W.A. .75 480 C.W.A. .58 Operating Amps Total Watts 0.58 0.33 0.29 0.25 64 64 64 64 0.82 0.48 0.41 0.36 0.21 94 94 94 94 94 1.15 0.67 0.60 0.52 0.31 130 130 130 130 135 1.70 0.95 0.85 0.72 0.47 188 188 188 188 189 1.15 0.70 0.58 0.50 0.35 130 130 130 130 140 1.60 1.00 0.80 0.70 0.42 188 188 188 188 185 1.78 1.08 0.89 0.76 0.50 199 199 199 199 213 2.00 1.25 1.00 .85 .50 238 238 238 238 237 Order fuses as a separate item by catalog number from right columns. Lamp Watts 50 70 100 150 175 200 Volts 120 208 240 277 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 Fuse Quantity Required 1 2 2 1 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 1 2 2 1 2 Fuse Kit Catalog Number HPS PSMH F5 — F3 — F3 — F2 — F5 — F3 — F3 — F2 — F2 — F8 F6 F5 F4 F5 F3 F3 F3 F3 F2 F10 F10 F5 F5 F5 F5 F5 F4 F3 F3 — F5 — F3 — F3 — F2 — F2 — F9 — F6 — F5 — F4 — F2 Fuses are filled with non-combustible granular material. Fuse Kit includes fuse, fuse block, wire, mounting screws and connectors. All mounting hoods have provisions for easy field installation of fuses in fixtures. † For specific Class I suitability of each fixture listed, see Thermal Suitability. ‡ For 175 W and 200 W fixtures, use 12” refractor only for Groups E, F and G. Heat-resistant glass globe supplied with 175 W and 200 W fixtures. 1014 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaire Dimensions High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Lighting 25° Angle Stanchion Mount Ceiling Mount Wall Mount Fixture with 8” Refractor Fixture with Guard and Polyester Reflector Fixture with 12” Refractor Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Enclosed and Gasketed — Area — HID Pendant Mount 1015 Mercmaster™ II HID Luminaire Photometric Data 150 W HPS UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen). Total Luminaire Efficiency = 86.1% CIE Type - Semi-Direct Lighting Plane Spacing Criteria 0-180 2.82 90-270 2.82 Diagonal 2.82 For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp – 0.594; for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95. REPORT NUMBER: LP15LGG 150 W High Pressure Sodium fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Enclosed and Gasketed — Area — HID % Walls Rw Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 0 1 2 3 4 5 6 7 8 9 10 Lumens 50.74 164.55 310.47 611.05 961.13 1308.18 1542.35 1716.10 1799.18 1802.19 1676.86 80 70 441.46 9.61 3.33 0.74 0.00 0.00 Total Luminaire Efficiency = 73.6% CIE Type - Direct Plane Spacing Criteria 0-180 1.46 90-270 1.46 Diagonal 1.68 Lumens 266.98 799.41 1337.05 1732.06 2067.60 2317.60 2210.81 866.77 145.09 14.46 8.75 7.93 120-130 130-140 140-150 150-160 160-170 170-180 4.51 2.16 0.48 0.00 0.00 0.00 1016 10 0 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 95 81 71 64 57 52 48 44 40 38 35 95 74 62 52 45 40 35 31 28 25 23 95 69 54 44 36 31 26 23 20 18 16 95 64 47 37 30 24 20 17 15 13 11 89 75 65 58 53 48 44 40 37 35 32 89 69 57 48 42 37 32 29 26 24 22 89 64 50 41 34 29 25 21 19 17 15 89 59 44 34 28 23 19 16 14 12 11 77 59 49 41 35 31 27 24 22 20 18 77 55 43 35 29 24 21 18 16 14 13 77 51 38 30 24 19 16 14 12 10 9 67 50 41 34 29 26 23 20 18 17 15 67 47 36 29 24 20 17 15 13 12 11 67 44 32 25 20 16 13 11 10 8 7 57 42 33 28 24 21 18 16 15 14 13 57 39 30 24 19 16 14 12 11 10 9 57 37 27 20 16 13 11 9 8 7 6 53 33 23 17 13 10 8 7 6 5 4 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 525.75 1136.81 3406.12 8463.75 % Lamp 3.3 7.1 21.3 52.9 % Fixture 3.8 8.3 24.7 61.4 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 4858.16 5299.62 5312.56 5313.30 13777.05 % Lamp 30.4 33.1 33.2 33.2 86.1 % Fixture 35.3 38.5 38.5 38.6 100.0 REPORT NUMBER: LP15LST 150 W High Pressure Sodium fixture with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 30 50 110-120 1379.11 120-130 130-140 140-150 150-160 160-170 170-180 50 70 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 88 79 71 64 58 53 49 45 42 39 36 88 76 65 56 49 43 38 34 31 28 26 88 72 59 49 42 36 31 27 24 22 20 88 69 55 44 36 31 26 23 20 18 16 86 77 69 62 57 52 47 44 40 38 35 86 74 63 55 48 42 38 34 31 28 26 86 71 58 49 41 35 31 27 24 22 20 86 68 54 44 36 30 26 23 20 18 16 82 71 61 52 46 40 36 33 30 27 25 82 68 57 47 40 35 30 27 24 21 19 82 66 53 43 36 30 26 22 20 17 16 78 68 58 50 44 39 35 31 29 26 24 78 66 55 46 39 34 30 26 23 21 19 78 64 52 42 35 30 25 22 19 17 16 75 65 56 48 42 38 34 30 28 25 23 75 64 53 45 38 33 29 26 23 21 19 75 62 50 41 35 29 25 22 19 17 15 73 60 49 40 33 28 24 20 18 16 14 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 2403.44 4135.50 8520.70 11743.37 % Lamp 15.0 25.8 53.3 73.4 % Fixture 20.4 35.1 72.3 99.7 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 31.14 35.65 38.29 38.29 11781.65 % Lamp 0.2 0.2 0.2 0.3 73.6 % Fixture 0.3 0.3 0.3 0.3 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaire Photometric Data 150 W HPS UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen). Total Luminaire Efficiency = 73.1% CIE Type - Direct Plane Spacing Criteria 2.06 90-270 1.58 Diagonal 1.62 REPORT NUMBER: LP15LAN 150 W High Pressure Sodium fixture with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Lumens 222.62 664.60 1084.32 1536.55 1771.90 1771.51 1668.93 1422.36 994.54 432.23 104.58 20.99 120-130 130-140 140-150 150-160 160-170 170-180 1.21 0.04 0.00 0.00 0.00 0.00 Total Luminaire Efficiency = 81.1% CIE Type - Semi-Direct Plane Spacing Criteria 0-180 1.98 90-270 1.98 Diagonal 3.40 0 1 2 3 4 5 6 7 8 9 10 Lumens 72.83 222.26 380.73 621.11 852.53 1765.29 3192.58 2366.61 1230.65 450.14 712.41 499.15 120-130 130-140 140-150 150-160 160-170 170-180 323.44 185.00 81.31 21.08 2.81 0.00 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 86 76 68 61 55 50 46 43 40 37 35 86 71 60 52 45 40 36 32 29 26 24 86 67 54 45 38 33 28 25 22 20 18 86 63 49 39 32 27 23 20 18 16 14 84 73 65 59 53 49 45 41 38 36 33 84 69 58 50 44 39 35 31 28 26 24 84 65 53 44 37 32 28 25 22 20 18 84 62 48 39 32 27 23 20 17 16 14 79 65 55 48 42 37 33 30 27 25 23 79 62 50 42 36 31 27 24 21 19 17 79 59 46 37 31 26 22 19 17 15 14 75 62 52 45 39 35 31 28 26 24 22 75 59 48 40 34 30 26 23 21 19 17 75 57 45 36 30 25 22 19 17 15 13 71 58 49 43 37 33 30 27 25 23 21 71 56 46 39 33 29 25 22 20 18 16 71 54 43 35 29 25 21 19 16 15 13 70 52 41 33 27 23 20 17 15 13 12 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 1971.54 3508.09 7051.50 11137.33 % Lamp 12.3 21.9 44.1 69.6 % Fixture 16.9 30.0 60.3 95.2 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 557.80 559.01 559.04 559.04 11696.38 % Lamp 3.5 3.5 3.5 3.5 73.1 % Fixture 4.8 4.8 4.8 4.8 100.0 REPORT NUMBER: LP15LJ 150 W High Pressure Sodium fixture with 8” Prismatic Glass Reractor - NEMA Type V * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 80 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 93 80 69 61 54 49 45 41 38 35 33 93 73 59 49 42 36 32 28 25 23 21 93 68 51 40 32 27 23 20 17 15 14 93 63 45 33 25 20 16 14 12 10 9 89 76 65 57 51 46 42 38 36 33 31 89 70 56 47 40 34 30 27 24 22 20 89 65 49 38 31 26 22 19 16 15 13 89 61 43 32 24 19 16 13 11 10 9 82 64 51 42 35 31 27 24 22 20 18 82 60 45 35 28 23 20 17 15 13 12 82 56 40 29 22 18 14 12 10 9 8 76 58 46 38 32 27 24 24 19 18 16 76 55 41 32 26 21 18 15 14 12 11 76 52 37 27 21 16 13 11 9 8 7 70 53 41 34 28 24 21 19 17 16 15 70 50 37 29 23 19 16 14 12 11 10 70 48 34 25 19 15 12 10 8 7 6 67 45 31 22 16 12 10 8 6 5 5 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumens 675.83 1296.93 3914.76 10704.60 % Lamp 4.2 8.1 24.5 66.9 % Fixture 5.2 10.0 30.2 82.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1661.70 1985.14 2251.45 2275.34 12979.94 % Lamp 10.4 12.4 14.1 14.2 81.1 % Fixture 12.8 15.3 15.3 17.5 100.0 1017 Lighting: Enclosed and Gasketed — Area — HID Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lighting 0-180 For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp – 0.594; for 70 W (6,400 lumen) HPS lamp – 0.40; for 50 W (4,000 lumen) HPS lamp – 0.25. For candlepower values of fixture with guard, multiply by 0.95. Mercmaster™ II HID Luminaire Photometric Data 175 W PSMH UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). Total Luminaire Efficiency = 75.4% CIE Type - General Diffuse Lighting Plane Spacing Criteria 0-180 n/a 90-270 n/a Diagonal n/a For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp – 1.36; for 100 W (8,500 lumen) PSMH lamp – 0.49. For candlepower values of fixture with guard, multiply by 0.95. REPORT NUMBER: LP17PGG 175 W Pulse Start Metal Halide fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Enclosed and Gasketed — Area — HID % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 42.67 151.27 305.99 587.79 880.58 1114.51 1306.71 1568.03 1720.24 1797.50 1750.20 110-120 1559.14 120-130 130-140 140-150 150-160 160-170 170-180 391.09 7.81 3.19 0.61 0.18 0.00 Total Luminaire Efficiency = 63.8% CIE Type - Direct Plane Spacing Criteria 0-180 1.50 90-270 1.50 Diagonal 1.66 0 1 2 3 4 5 6 7 8 9 10 Lumens 271.72 817.50 1392.53 1749.97 2044.83 2121.25 1862.42 720.46 141.89 14.66 8.28 9.57 120-130 130-140 140-150 150-160 160-170 170-180 5.69 3.14 2.17 1.71 1.70 0.36 1018 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 82 70 62 55 50 46 42 38 35 33 31 82 65 54 46 40 35 31 27 25 22 20 82 60 47 38 32 27 23 20 18 16 14 82 55 42 33 26 22 18 15 13 12 10 77 65 57 51 46 42 38 35 32 30 28 77 60 50 42 37 32 28 25 23 21 19 77 56 44 36 30 25 22 19 17 15 13 77 52 39 30 24 20 17 14 12 11 9 66 51 42 35 31 27 24 21 19 17 16 66 47 37 30 25 21 18 16 14 13 11 66 44 33 26 21 17 14 12 10 9 8 57 42 35 29 25 22 20 18 16 14 13 57 40 31 25 21 17 15 13 12 10 9 57 37 28 21 17 14 12 10 9 7 7 48 35 28 23 20 17 15 14 13 12 11 48 33 25 20 16 14 12 10 9 8 7 48 31 22 17 13 11 9 8 7 6 5 44 27 19 14 11 8 7 6 5 4 3 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 499.93 1087.72 3082.80 7677.78 % Lamp 2.9 6.2 17.6 43.9 % Fixture 3.8 8.2 23.4 58.2 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 5106.84 5497.93 5508.93 5509.71 13187.48. % Lamp 29.2 31.4 31.5 31.5 75.4 % Fixture 38.7 41.7 41.7 41.8 100.0 REPORT NUMBER: LP17PST 175 W Pulse Start Metal Halide fixture with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Rw 80 Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 76 69 62 56 51 47 43 40 37 34 32 76 66 57 49 43 38 34 31 28 25 23 76 63 52 44 37 32 28 25 22 20 18 76 61 48 39 33 28 24 21 18 16 15 74 67 61 55 50 45 42 39 36 33 31 74 65 56 48 42 37 33 30 27 25 23 74 62 51 43 37 32 28 25 22 20 18 74 60 48 39 33 28 24 21 18 16 15 71 62 53 46 41 36 32 29 26 24 22 71 60 50 42 36 31 27 24 22 19 18 71 58 47 38 32 27 23 20 18 16 14 68 59 51 45 39 35 31 28 26 23 22 68 57 48 41 35 30 27 24 21 19 17 68 56 46 38 32 27 23 20 18 16 14 65 57 49 43 38 33 30 27 25 23 21 65 55 47 40 34 30 26 23 21 19 17 65 54 45 37 31 27 23 20 18 16 14 64 53 43 35 30 25 22 19 16 15 13 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 2481.75 4231.72 8397.80 11122.57 % Lamp 14.2 24.2 48.0 63.6 % Fixture 22.2 37.9 75.2 99.6 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 32.51 38.20 43.51 47.28 11169.85 % Lamp 0.2 0.2 0.2 0.3 63.8 % Fixture 0.3 0.3 0.3 0.4 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ II HID Luminaire Photometric Data 175 W PSMH UNILETS® for Use with Threaded Metal Conduit. * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). Total Luminaire Efficiency = 61.6% CIE Type - Direct Plane Spacing Criteria 2.02 90-270 1.62 Diagonal 1.58 REPORT NUMBER: LP17PAN 175 W Pulse Start Metal Halide fixture with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Lumens 221.01 674.48 1111.79 1519.14 1697.13 1644.77 1457.83 1248.84 814.94 280.33 87.54 16.66 120-130 130-140 140-150 150-160 160-170 170-180 1.25 0.06 0.06 0.00 0.00 0.00 Total Luminaire Efficiency = 73.9% CIE Type - Semi-Direct Plane Spacing Criteria 0-180 2.08 90-270 2.08 Diagonal 3.78 0 1 2 3 4 5 6 7 8 9 10 Lumens 58.60 179.87 316.74 543.99 726.99 1445.41 3661.34 2432.42 1351.63 477.79 717.26 474.07 120-130 130-140 140-150 150-160 160-170 170-180 293.44 163.08 70.40 18.48 2.58 0.00 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 73 64 58 52 47 43 40 37 34 32 30 73 61 52 45 39 34 31 28 25 23 21 73 57 46 39 33 28 25 22 20 18 16 73 54 42 34 28 24 20 18 16 14 13 71 62 56 50 46 42 38 35 33 31 29 71 59 50 43 38 34 30 27 25 23 21 71 56 45 38 32 28 24 22 19 17 16 71 53 42 34 28 24 20 18 16 14 12 67 56 47 41 36 32 29 26 24 22 20 67 53 44 36 31 27 24 21 19 17 15 67 51 40 33 27 23 20 17 15 14 12 64 53 45 39 34 30 27 25 23 21 19 64 51 42 35 30 26 23 20 18 17 15 64 49 39 32 27 23 20 17 15 13 12 61 50 43 37 33 29 26 24 22 20 18 61 49 40 34 29 25 22 20 18 16 15 61 47 38 31 26 22 19 17 15 13 12 59 45 36 29 24 21 18 15 14 12 11 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 2007.28 3526.41 6868.32 10389.94 % Lamp 11.5 20.2 39.2 59.4 % Fixture 18.6 32.7 63.7 96.4 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 384.53 385.77 385.89 385.89 10775.83 % Lamp 2.2 2.2 2.2 2.2 61.6 % Fixture 3.6 3.6 3.6 3.6 100.0 REPORT NUMBER: LP17PJ 175 W Pulse Start Metal Halide fixture with Globe and 8” Prismatic Glass Reractor - NEMA Type V * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Rw 80 Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 85 72 62 55 49 44 40 37 34 31 29 85 66 53 44 37 32 28 25 22 20 18 85 61 46 35 28 23 20 17 15 13 12 85 56 39 29 22 17 14 12 10 8 7 82 68 59 51 46 41 37 34 32 30 28 82 63 51 41 35 30 26 23 21 19 18 82 58 44 34 27 22 19 16 14 13 11 82 54 38 28 21 16 13 11 9 8 7 75 57 46 37 31 27 24 21 19 17 16 75 54 40 31 24 20 17 15 13 11 10 75 50 35 25 19 15 12 10 8 7 6 69 52 41 33 28 24 21 19 17 16 14 69 49 36 28 22 18 15 13 12 10 9 69 46 32 23 17 14 11 9 8 7 6 64 47 37 30 25 21 19 17 15 14 13 64 45 33 25 20 16 14 12 10 9 8 64 43 30 21 16 12 10 8 7 6 5 61 40 27 19 13 10 8 6 5 4 4 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumens 555.22 1099.21 3271.60 10717.00 % Lamp 3.2 6.3 18.7 61.2 % Fixture 4.3 8.5 25.3 82.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1669.13 1962.57 2196.06 2217.10 12934.11 % Lamp 9.5 11.2 12.5 12.7 73.9 % Fixture 12.9 15.2 15.2 17.1 100.0 1019 Lighting: Enclosed and Gasketed — Area — HID Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lighting 0-180 For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp – 1.36; for 100 W (8,500 lumen) PSMH lamp – 0.49. For candlepower values of fixture with guard, multiply by 0.95. Mercmaster™ II HID Luminaire Isofootcandle Data High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS® for Use with Threaded Metal Conduit. Lighting HPS Lamp Wattage Horizontal Distance from Mounting Point (Ft/M) Mounting Height (Ft/M) 0/0 5/1.5 10/3.0 15/4.6 Mercmaster II, High Pressure Sodium, No Reflector, No Guard 70 Watt – 5,800 Lumen 100 Watt – 9,500 Lumen 150 Watt – 16,000 Lumen 20/6.1 25/7.6 30/9.1 35/10.7 40/12.2 45/13.7 50/15.2 Lighting: Enclosed and Gasketed — Area — HID Footcandle Chart (Initial Horiz. FTC) 70 100 150 8/2.4 .60 2.70 1.50 .73 .38 .21 .13 .08 .06 .04 .03 10/3.0 .39 1.70 1.30 .72 .40 .24 .15 .10 .07 .05 .04 12/3.7 .27 1.10 1.10 .68 .41 .26 .17 .11 .08 .06 .04 15/4.6 .17 .66 .81 .60 .39 .26 .18 .13 .09 .07 .05 20/6.1 .10 .37 .43 .40 .33 .25 .18 .13 .10 .08 .06 8/2.4 1.00 4.80 2.70 1.20 .62 .35 .21 .14 .10 .07 .05 10/3.0 .64 2.80 2.20 1.30 .67 .40 .25 .16 .11 .08 .06 12/3.7 .44 1.80 1.80 1.30 .71 .42 .28 .18 .13 .09 .07 15/4.6 .28 1.10 1.30 .97 .70 .45 .30 .21 .15 .11 .08 20/6.1 .16 .59 .69 .70 .55 .42 .32 .23 .17 .13 .10 8/2.4 2.50 8.30 4.60 2.20 1.10 .62 .38 .25 .17 .12 .09 10/3.0 1.60 5.40 4.00 2.20 1.20 .71 .44 .29 .20 .14 .11 12/3.7 1.10 4.20 3.30 2.00 1.20 .76 .49 .33 .23 .17 .12 15/4.6 .72 2.10 2.40 1.80 1.20 .79 .54 .38 .27 .20 .15 20/6.1 .40 1.10 1.30 1.30 1.00 .73 .54 .40 .30 .23 .18 Mercmaster II, High Pressure Sodium, With Reflector, No Guard 70 Watt – 5,800 Lumen 100 Watt – 9,500 Lumen 150 Watt – 16,000 Lumen Footcandle Chart (Initial Horiz. FTC) 70 100 150 1020 8/2.4 14.80 10.00 3.80 1.50 .55 .15 .05 .03 .02 .01 .01 10/3.0 9.50 7.70 3.70 1.60 .74 .32 .12 .05 .03 .02 .01 12/3.7 6.60 6.60 3.30 1.50 .87 .46 .18 .10 .05 .02 .02 15/4.6 4.20 4.20 2.70 1.70 .94 .56 .33 .18 .10 .06 .03 20/6.1 2.40 2.50 1.90 1.30 .92 .62 .41 .28 .18 .12 .08 8/2.4 21.90 16.80 6.30 2.40 .86 .28 .08 .05 .03 .02 .01 10/3.0 14.00 12.40 6.00 2.70 1.20 .53 .19 .07 .04 .03 .02 12/3.7 9.70 9.40 5.50 2.80 1.40 .73 .36 .20 .13 .04 .03 15/4.6 6.20 6.70 4.40 2.70 1.60 .90 .53 .33 .19 .11 .05 20/6.1 3.50 4.30 3.10 2.20 1.50 1.0 .68 .44 .30 .21 .13 8/2.4 36.90 27.80 10.50 3.80 1.30 .35 .14 .08 .04 .03 .02 10/3.0 23.60 20.80 10.10 4.40 2.00 .78 .29 .11 .07 .04 .03 12/3.7 16.40 15.80 9.20 4.60 2.20 1.20 .54 .30 .16 .06 .04 15/4.6 10.50 11.60 7.50 4.50 2.60 1.50 .86 .42 .26 .16 .08 20/6.1 5.90 7.20 5.20 3.70 2.50 1.70 1.10 .73 .50 .32 .19 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ Jr. Luminaires High Pressure Sodium. Suitable for Use in Wet Locations UNILETS® for Use with Threaded Metal Conduit. 120 V Integral Ballast. Medium Base Socket for Medium Base Lamps. With Globe: 70 W: † 35 W, 50 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F Class II, Division 1 and 2, Groups E ‡, F, G Class III 100 W, 150 W: † Class I, Division 2, Groups A, B, C, D With Refractor (NEMA V): 150 W: † 35 W, 50 W, 70 W, 100 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F, G Class III Applications Lighting • Inexpensive HID integrally ballasted fixture for use in hazardous locations – inexpensive to buy and inexpensive to operate (uses one-fifth as much electrical energy as incandescent and threequarters as much as fluorescent). • Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries, manufacturing plants, power plants and other locations where moisture, dirt, dust or corrosive atmospheres are encountered. Features Lighting: Enclosed and Gasketed — Area — HID • “Wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. Only wiring required is attaching two wires to connection block in mounting hood. • Safe, easy servicing without disconnecting any wiring. “Wireless” fixture unit easily threads off mounting hood for convenient servicing. • Quick, easy conversion from Appleton V-51® incandescent installation to Mercmaster Jr. HID. Just remove V-51® fixture unit and thread Mercmaster Jr. fixture unit onto existing V-51® mounting hood. • Choice of mounting hoods. Standard fixtures in pendant, ceiling, outlet box, wall and stanchion mountings. • Standard pendant mounting hood for rigid or flexible mounting. Balanced round design automatically hangs plumb when used with flexible hanger. • Unitized construction reduces installation and maintenance costs. • Ballast has standard non-PCB biodegradable capacitors. • Medium base socket is furnished with 392 °F/200 °C leads, prewired to the ballast. Porcelain socket assures trouble-free operation in high ambient installations. • Prismatic glass globe or glass refractor is standard and threads directly into fixture housing. Eliminates glare and provides uniform light distribution. • Fiberglass reinforced polyester reflector for exceptionally severe corrosive atmospheres. Vented for cooler, dirt-free operation, increased lumen output. Illustrated Feature Conversion from Appleton V-51 incandescent installation to HID Mercmaster Jr. is easy and fast. Step No. 1: After power is shut off, remove present incandescent V-51 fixture unit from existing V-51 mounting hood. Standard Materials Step No. 2: Thread Mercmaster Jr. HID fixture unit onto existing V-51 mounting hood — and conversion is completed. • Mounting hoods: copperfree (4/10 of 1% max.) aluminum or malleable iron • Ballast bodies: copperfree (4/10 of 1% max.) aluminum • Guards: copperfree (4/10 of 1% max.) aluminum or steel • Reflectors: fiberglass reinforced polyester or porcelain • Globe: 35 W-100 W, threaded prismatic glass and threaded polycarbonate; 150 W, threaded heat-resistant prismatic glass • Refractor: heat-resistant prismatic glass Standard Finishes • Ballast bodies, aluminum guard and VMA, VXHA-A, OBVW1-A, OBV1-A, JBW1-A, JB1-A, GSW2 and MS mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform surface protection • VA, VXHA, OBVW1, OBV1, GS-2, JBW1, and JB1 malleable iron mounting hoods: triple coat – (1) zinc electroplate; (2) chromate; and (3) epoxy powder coat • Steel guard: zinc electroplate Options • Fuses for fixtures, factory installed. Add suffix -F. Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10444 † The MJBW Wall Mount Fixture is suitable for Class I, Division 2, Groups A, B, C and D only. ‡ Per NEC 500.6(1), there is no such classification as Class II, Division 2, Group E. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1021 Mercmaster™ Jr. Luminaire Classified Area Suitability and Ballast Data High Pressure Sodium. Suitable for Use in Wet Locations UNILETS® for Use with Threaded Metal Conduit. 120 V Integral Ballast. Medium Base Socket for Medium Base Lamps. Lighting: Enclosed and Gasketed — Area — HID Lighting With Globe: 70 W: † 35 W, 50 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F Class II, Division 1 and 2, Groups E ‡, F, G Class III 100 W, 150 W: † Class I, Division 2, Groups A, B, C, D With Refractor (NEMA V): 150 W: † 35 W, 50 W, 70 W, 100 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F, G Class III Thermal Suitability Table at below shows maximum operating temperatures of Mercmaster Jr. fixtures for Class I, Division 2, in a 104 °F/40 °C ambient. Per NEC 500.8(B)(4), the temperature marking on fixtures shall not exceed the ignition temperature of the specific gas or vapor to be encountered. NEC 500.8(B)(4) states that these markings (Identification Numbers) “marked on equipment nameplates shall be in accordance with Table NEC 500.8(C).” This NEC table is duplicated, as it applies to Appleton Mercmaster Jr. fixtures, in the table below. As shown, the higher the Temperature Identification Number, the cooler the fixture operates. Keep this in mind when selecting a fixture for a specific gas or vapor. Example: • Gasoline (56-60 octane) • Fixture with Globe and Reflector To determine Mercmaster Jr. thermal suitability for the above example: (1) Check the Thermal Suitability on the following page for ignition temperature of gas or vapor to be encountered. It reveals that 56-60 octane gasoline has an ignition temperature of 536 °F/280 °C. (2) Look in table below for fixtures under “With Globe and Reflector” that do not exceed the 536 °F/280 °C ignition temperature of the gasoline. (3) Select the best fixture for your purpose. The 35 W, 50 W, 70 W or 100 W fixture with globe and reflector is acceptable because none of these fixture lamp surfaces exceed the 536 °F/280 °C ignition temperature of the gasoline. Temperature Identification Numbers Class I, Division 2, Groups A, B, C and D With Globe or with Globe and Reflector Lamp Watts Class II, Division 1 and 2, Groups E, F and G With 8” Refractor With Globe, with Globe and Reflector, or with 8” Refractor Nameplate Marking Temperature Range (°F/°C) Nameplate Marking Temperature Range (°F/°C) Nameplate Marking Temperature Range (°F/°C) Groups 35 T4 250-275 / 121-135 T4 250-275 / 121-135 T4C 214-248 / 101-120 E, F, G 50 T2D 394-419 / 201-215 T3 358-392 / 181-200 T3C 277-320 / 136-160 E, F, G 70 T2B 448-500 / 231-260 T2C 421-446 / 216-230 T3B 322-329 / 161-165 E, F, G ➊ 100 T2A 502-536 / 261-280 T2B 448-500 / 231-260 — — E, F, G ➋ 150 T2 538-572 / 281-300 T2A 502-536 / 261-280 — — — Ambient Suitability of Mercmaster Jr. Fixtures Electrical Specifications (Reactor Ballasts) All fixtures suitable for operation at -40 °F/-40 °C. 35W 50W 70W 100W 150W 104 °F/ 40 °C 104 °F/ 40 °C 77 °F/ 25 °C 77 °F/ 25 °C 77 °F/ 25 °C Retrofits Incandescent Fixtures Easily and Quickly • • • • • 35 W HPS Comparable to 100/150 W Incandescent Lamp 50 W HPS Comparable to 200 W Incandescent Lamp 70 W HPS Comparable to 300 W Incandescent Lamp 100 W HPS Comparable to 1.5 300 W Incandescent Lamp ➌ 150 W HPS Comparable to 2.5 300 W Incandescent Lamp ➌ Lamp Watts Line Voltage 60 Hz Line Current in Amperes Starting HPF Operating HPF Input Watts 35 120 0.41 0.38 43 50 120 0.62 0.56 60 70 120 0.70 0.73 82 100 120 1.10 1.00 115 150 120 1.70 1.50 170 Optional Factory-Installed Fuses – Add Suffix -F Available as a factory installed item with Mercmaster Jr. fixtures. ➊70W suitable for Groups E and F with globe; suitable for Groups E, F, and G with refractor. ➋ 100W suitable for Groups E, F and G with refractor only. ➌ These are guidelines only. Light distribution and other factors must be taken into consideration. † The MJBW Wall Mount Fixture is suitable for Class I, Division 2, Groups A, B, C and D only. ‡ Per NEC 500.6(1), there is no such classification as Class II, Division 2, Group E. 1022 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ Jr. Luminaires 35 W, 50 W, 70 W, 100 W, 150 W HPS Complete with Mounting Hood. Medium Base Socket. High Power Factor (Min. P.F. 90%). Integral Ballast for 120 V Line Operation. With Globe: 70 W: † 35 W, 50 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F Class II, Division 1 and 2, Groups E ‡, F, G Class III 100 W, 150 W: † Class I, Division 2, Groups A, B, C, D With Refractor (NEMA V): 150 W: † 35 W, 50 W, 70 W, 100 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F, G Class III S76 S68 S62 S54 S55 — — — — — MGSW35-120 MGSW50-120 MGSW70-120 MGSW10-120 MGSW15-120 MGSW35J-120 MGSW50J-120 MGSW70J-120 MGSW10J-120 MGSW15J-120 Wall ➋➌ — Class I, Division 2 only. Aluminum mounting hood and ballast body. Gasket and screws furnished with fixture. Fits JBX Cast Boxes 35 50 70 100 150 S76 S68 S62 S54 S55 25° Stanchion ➍ — Aluminum mounting hood and ballast body. One hub 35 S76 50 S68 70 S62 100 S54 150 S55 — — — — — MJBW35-120 MJBW50-120 MJBW70-120 MJBW10-120 MJBW15-120 MJBW35J-120 MJBW50J-120 MJBW70J-120 MJBW10J-120 MJBW15J-120 1-1/4 1-1/2 1-1/4 1-1/2 1-1/2 1-1/2 1-1/4 1-1/2 1-1/4 1-1/2 MS35125-120 MS35150-120 MS50125-120 MS50150-120 MS70125-120 MS70150-120 MS10125-120 MS10150-120 MS15125-120 MS15150-120 MS35125J-120 MS35150J-120 MS50125J-120 MS50150J-120 MS70125J-120 MS70150J-120 MS10125J-120 MS10150J-120 MS15125J-120 MS15150J-120 ‡ Per NEC 500.6(1), there is no such classification as Class II, Division 2, Group E. † The MJBW Wall Mount Fixture is suitable for Class I, Division 2, Groups A, B, C and D only. All fixtures on this page comply with UL Standard 844 except MJBW Wall Mount Fixture, which is not suitable for Class II, Division 1. Using cast outlet box with Wall Mount Fixture provides the following clearances: for the globe – JBX box, 1-5/8” from wall; GSU box, 2” from wall; for the refractor – JBX box, 15/16” from wall; GSW box, 1-5/16” from wall. Reflectors cannot be used with the wall mount fixtures. Stanchion Mount can be used with standard dome or 30° angle reflector. To order fixture with guard, add -G before voltage (example: MA3575G-120). Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1023 Lighting: Enclosed and Gasketed — Area — HID 35 50 70 100 150 Lighting Catalog Number ➎ With Globe, With Refractor ANSI Hub Size Less Guard (NEMA V) Lamp Watts Lamp Type (Inches) With Globe, Less Guard With Refractor (NEMA V) Pendant — Aluminum mounting hood and ballast body. One Hub, Rigid or Flexible Mounting 3/4 MA3575-120 MA3575J-120 35 S76 1 MA3510-120 MA3510J-120 3/4 MA5075-120 MA5075J-120 50 S68 1 MA5010-120 MA5010J-120 3/4 MA7075-120 MA7075J-120 70 S62 1 MA7010-120 MA7010J-120 3/4 MA1075-120 MA1075J-120 100 S54 1 MA1010-120 MA1010J-120 3/4 MA1575-120 MA1575J-120 150 S55 1 MA1510-120 MA1510J-120 Ceiling — Aluminum mounting hood and ballast body. Five Hubs, Four Close-Up Plugs 3/4 MC3575-120 MC3575J-120 35 S76 1 MC3510-120 MC3510J-120 3/4 MC5075-120 MC5075J-120 50 S68 1 MC5010-120 MC5010J-120 3/4 MC7075-120 MC7075J-120 70 S62 1 MC7010-120 MC7010J-120 3/4 MC1075-120 MC1075J-120 100 S54 1 MC1010-120 MC1010J-120 3/4 MC1575-120 MC1575J-120 150 S55 1 MC1510-120 MC1510J-120 Wall ➌ — Malleable iron mounting hood and aluminum ballast body. Gasket and screws furnished with fixture. Fits GSU Cast Boxes Mercmaster™ Jr. Luminaires High Pressure Sodium. Suitable for Use in Wet Locations UNILETS® for Use with Threaded Metal Conduit. 120 V Integral Ballast. Medium Base Socket for Medium Base Lamps. With Globe: 70 W: † 35 W, 50 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F Class II, Division 1 and 2, Groups E ‡, F, G Class III 100 W, 150 W: † Class I, Division 2, Groups A, B, C, D With Globe With 8” Refractor With Refractor (NEMA V): 150 W: † 35 W, 50 W, 70 W, 100 W: † Class I, Division 2, Groups A, B, C, D Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E ‡, F, G Class III Description Catalog Number With Globe ➊ With 8” Refractor Lamp Watts ANSI Lamp Type 35 S76 MOB35-120 MOB35J-120 50 S68 MOB50-120 MOB50J-120 70 S62 MOB70-120 MOB70J-120 100 S54 MOB10-120 MOB10J-120 150 S55 MOB15-120 MOB15J-120 Lamp Watts ANSI Lamp Type Catalog Number S76 35 MUL35-120 S68 50 MUL50-120 S62 70 MUL70-120 S54 100 MUL100-120 S55 150 MUL150-120 S76 35 MBL35-120 S68 50 MBL50-120 S62 70 MBL70-120 S54 100 MBL100-120 S55 150 MBL150-120 Lighting Outlet Box Fixture Aluminum ballast housing, complete with aluminum mounting hood. Epoxy clad. Lighting: Enclosed and Gasketed — Area — HID Use with SEH and 3-1/4” or 4” Octagonal Outlet Box. Fixture furnished with mounting plate and gasket. Octagonal boxes not suitable for classified locations. Fixture Units Ballast body with globe (VPGL-1 with 35 W, 50 W, 70W and 100W and VPGL-1HR with 150 W). Use with mounting hoods on following page or any V-51 series mounting hood. Polyester or porcelain reflector and aluminum guard are available. High power factor (min. P.F. 90%). Ballast provides 120 V line operation. Ballast Bodies Use with mounting hoods on following page or any V-51 series mounting hood and with refractor or globe listed. Order other accessories below as desired. High power factor (min. P.F. 90%). Ballast provides 120 V line operation. ‡ Per NEC 500.6(1), there is no such classification as Class II, Division 2, Group E. † The MJBW Wall Mount Fixture is suitable for Class I, Division 2, Groups A, B, C and D only. ➊ Order JBX or GSU box on following page. 1024 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ Jr. Luminaire Mounting Hoods and Outlet Boxes High Pressure Sodium. Suitable for Use in Wet Locations UNILETS® for Use with Threaded Metal Conduit. 120 V Integral Ballast. Medium Base Socket for Medium Base Lamps. Wall Ceiling Catalog Number Hub Size (Inches) Aluminum 1/2 — Malleable Iron Pendant Mounting Furnished with connection block, gasket and screws VA Lighting VMA VA50 3/4 VMA75 VA75 1 VMA100 VA100 1/2 VXHA50-A VXHA50 3/4 VXHA75-A VXHA75 1 VXHA100-A VXHA100 Ceiling Mounting Five Hubs. Furnished with connection block, gasket, screws and four close-up plugs Wall ➎ OBVW1-A OBVW1 Ceiling OBV1-A OBV1 OBV OBVW GS Round Base – Fits GSU Cast Boxes ➌ ➍ Furnished with connection block, gasket and screws GS GSW Wall ➎ — GSW2 Ceiling — GS2 JB Round Base – Fits JBX Cast Boxes ➌ ➍ Furnished with connection block, gasket and screws JB JBW Wall ➎ JBW1-A JBW1 Ceiling JB1-A JB1 Stanchion Mounting ➏ 25° Stanchion furnished with connection block and screws. 1-1/4 MS-125 — 1-1/2 MS-150 — 1/2 JBX50L-A — 3/4 JBX75L-A — MS JBX Cast Conduit Outlet Boxes JBX Aluminum. 1-5/16” inside depth. Four tapped openings, two close-up plugs and mounting lugs. Use with JBW wall mount fixture and JB round base mounting hoods GSU Cast Conduit Outlet Box (Form 20) GSU-20 GSU-100 Malleable iron. 1-3/4” inside depth. Four 3/4” hubs with four 3/4” to 1/2” reducers, and three 1/2” close-up plugs. Use with GSW wall mount fixture and GS round base mounting hoods 1/2 or 3/4 — GSU-20 1 — GSU-100 Order SEH box from catalog section A and octagonal box from Section OB. To order fixture with guard, add G before voltage (example: MOB35G-120). Order JBX below. Using JBX Box with these fixtures and mounting hoods provides 15/16” clearance from wall with refractor and 1-5/8” clearance from wall with globe. Order GSU below. Using GSU Box with these fixtures and mounting hoods provides 1-5/16” clearance from wall with refractor and 2” clearance from wall with globe. Reflectors cannot be used with wall mount fixtures. See dimensions for globe or refractor clearance from wall for these fixtures. ➏ Stanchion mounting hood can be used with standard dome or 30° angle reflector. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1025 Lighting: Enclosed and Gasketed — Area — HID VXHA Cast/Outlet Box Mounting Furnished with connection block, mounting plate and gasket. Octagonal outlet box not suitable for classified locations. Fits SEH and 3-1/4” or 4” Octagonal Box ➋ Mercmaster™ Jr. Luminaire Accessories High Pressure Sodium. Suitable for Use in Wet Locations UNILETS® for Use with Threaded Metal Conduit. 120 V Integral Ballast. Medium Base Socket for Medium Base Lamps. Description Catalog Number Lighting Globes – 35 W-150 W Lighting: Enclosed and Gasketed — Area — HID VPGL-1HR Clear Heat-Resistant Prismatic Glass VPGL-1HR Polycarbonate (100W lamp max.) ➋ VPGL-2PL VPGL-2PL Description Light Distribution IES/NEMA Distribution Curves Catalog Number Refractors – 35 W-150 W NEMA Type II LPJR-2CG NEMA Type V LPJR-5CG Closed Prismatic Glass 8” Refractors Catalog Number Porcelain Polyester Description Reflectors – 35 W-150 W ➊ Standard Standard (porcelain, 16” dia.; polyester, 16-1/4” dia.) LPR-25ST LPRP-25ST 30° Angle (porcelain, 12” dia.; polyester, 14-3/8” dia.) LPR-25AN LPRP-25AN 30° Angle Description Catalog Number Guards – 35 W-150 W VPGU-1 Copperfree Aluminum Guard VPGU-1 Steel Guard for 8” Refractors LPBG-8 35 W-150 W (Medium Base) JRS-100 Globe Gasket, Silicone Rubber – 35W-150W VPGL-GK LPBG-8 Socket Gasket ➊ V-51 reflectors cannot be used with Mercmaster Jr. Fixtures. ➋ Do not use Polycarbonate Globes in ambients exceeding 77 °F/25 °C. These globes for burning in vertical base-up position only. 1026 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ Jr. Luminaire Dimensions 35 W, 50 W, 70 W, 100 W, 150 W UNILETS® for Use with Threaded Metal Conduit. 120 V Integral Ballast. Medium Base Socket for Medium Base Lamps. Lighting Fixture with 8” Refractor Lighting: Enclosed and Gasketed — Area — HID MBL Ballast Body Fixture with Guard and Polyester Reflectors VXHA Ceiling Mount VMA Pendant Mount GSW Wall Mount ➊ and GS Ceiling Mount with GSU Box ➋ ➌ Stanchion Mount ❻ ➍ OBV Outlet Box Mount and Mounting Plate JBW Wall Mount ➊ with JBX Box ➋ ➊ Mounting holes 9/32” diameter on 5-1/8” centers. Mounting plate is a separate piece furnished with outlet box mount fixture. The 2.75” dimension is for mounting on 3-1/4” octagonal boxes and the 3.50” dimension is for 4” octagonal boxes. ➋ Wall mount fixtures provide the following wall clearances: with GSU box – 2” from wall with globe and 1-5/16” from wall with refractor; with JBX box – 1-5/8” from wall with globe and 15/16” from wall with refractor. Reflectors cannot be used with wall mount fixtures. ➌ Order GSU or JBX box separately. ➍ Standard dome or 30° angle reflectors can be used with stanchion mount. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1027 Mercmaster™ LED Luminaires cETLus Certification. Enclosed and Gasketed Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Type 3R, 4X IP66, IP67 Suitable for Use in Wet Locations Marine Outside Type (Salt Water) Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting Applications • Enclosed and gasketed fixtures suitable for use in: — Marine and wet locations — A wide range of industrial, chemical processing and other areas where flammable gases and vapors are present under conditions defined by the National Electrical Code as Class I, Division 2 — Areas of low clearance, low ceiling heights or where fixture weights must be minimized — Non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust, corrosive atmosphere or high ambient temperatures are encountered • Typical applications include: — Pulp and paper mills — Processing plants — Chemical plants — Oil refineries — Foundries — Manufacturing plants — Storage areas — Waste and sewage treatment — Parking garages — Other areas where dust, water, dirt and rough usage are a problem Features • Compact light-weight low profile design is suited for low mounting heights. • Modular design allows scores of fixture component combinations to meet installation needs. Uses same mounting hoods as Mercmaster III. • Fixture housing and mounting hoods are copperfree cast aluminum with baked epoxy finish. All exposed hardware is stainless steel. • Accommodates a wide range of voltages. • Ambient: -40 ˚F to 131 ˚F / -40 ˚C to 55 ˚C • Electrical: 120-277 Vac, 50/60 Hz; 347-480 Vac, 50/60 Hz • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360º compression at all points on ballast housing gasket for positive sealing. Swing away design of captive bolt and nut simplifies servicing. • All Mercmaster mounting hoods have provision for easy field installation of fuses in fixtures (see Fixture Unit — Electrical Specification). Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 8750, UL 844 • CSA Standard: C22.2 No. 250, C22.2 No. 137 • cETLus Listed Related Products • Photocells for classified use are available, see PCD2 Series. Standard Materials • Mounting hoods and bodies: cast copperfree (4/10 of 1% max.) aluminum • All hardware and catch assemblies: stainless steel • Globes: polycarbonate Standard Finishes • Mounting hoods, bodies and guards: baked gray epoxy-clad finish, electrostatically applied for complete uniform protection 1028 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ LED Luminaires cETLus Certification. Enclosed and Gasketed Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Type 3R, 4X IP66, IP67 Suitable for Use in Wet Locations Marine Outside Type (Salt Water) Illustrated Features Driver Assembly Utilizing non-sparking components avoiding the ignition of gases or vapors that may be present (nA). LED Chamber Protected by polycarbonate lens, allows for easy maintenance access. Lighting Heatsink Reliable heat transfer via the cast, epoxy powder coat aluminum body. Provides maximum heat dissipation from the LED assembly to the outside environment. Modular Plug between LED and driver. Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. Photocell Available for all fixtures except cone and ceiling mount. Installs through knock-out in mounting hood. Provides continuous ON-OFF dusk-to-dawn control. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Safety Rounded heatsink edges prevent possible injury during installation. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. Mounting Hood and Globe Gaskets Silicone rubber gaskets seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1029 Lighting: Enclosed and Gasketed — Area — LED/Induction Terminal Blocks (Zone 2) A seven-point terminal block is provided to facilitate wiring. Terminal block accommodates wire size ranging from #8 to #24 AWG. Mercmaster™ LED Luminaires cETLus Certification. Enclosed and Gasketed Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Type 3R, 4X IP66, IP67 Suitable for Use in Wet Locations Marine Outside Type (Salt Water) Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide MLED A 17 Series: MLED - Mercmaster LED Light Level: 17 - 175 W Mounting: A - Pendant C - Ceiling D - Pendant Cone R - 90º Stanchion S - 25º Stanchion W - Wall Lighting Lighting: Enclosed and Gasketed — Area — LED/Induction 2 P 5 BU Optical Assembly: P - Polycarbonate Globe Hub Size: 2 - 3/4” NPT 3 - 1” NPT 4 - 1-1/4” NPT stanchion 5 - 1-1/2” NPT stanchion H1 Voltage: BU - Universal Voltages 120-277 Vac, 50/60 Hz BH - 347-480 Vac, 50/60 Hz Light Distribution: 5 - NEMA 5 Options: F - Fusing ➊ H1 - Photocontrol 120 V H2 - Photocontrol 208 V H3 - Photocontrol 240 V H4 - Photocontrol 277 V Technical Data Lamp Light Level Equivalent Type 175 Watt PSMH Supply Wire Temperature (°F/°C) Ambient Temperature (°F/°C) Class I, Division 2 149/65 104/40 T4A 167/75 131/55 T4 LED “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” # T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 ➊ Canadian Electrical Code does NOT allow fusing in hazardous locations V. V CSA Certification Only. 1030 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ LED Luminaires cETLus Certification. Enclosed and Gasketed Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Type 3R, 4X IP66, IP67 Suitable for Use in Wet Locations Marine Outside Type (Salt Water) Lamp Type Light Level LED 17 Hub Size (Inches) Catalog Numbers ➊ 3/4 MLEDA172P5 1 MLEDA173P5 3/4 MLEDD172P5 1 MLEDD173P5 3/4 MLEDC172P5 1 MLEDC173P5 Pendant — One Hub, Rigid Mounting Pendant Cone — One Hub, Rigid Mounting 17 LED Suffix BU BH Voltage AC 120 - 277 347 - 480 17 Frequency 50/60 Hz 50/60 Hz Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1031 Lighting: Enclosed and Gasketed — Area — LED/Induction Ceiling — Five Hubs, Four Close-up Plugs Lighting LED Mercmaster™ LED Luminaires cETLus Certification. Enclosed and Gasketed Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Type 3R, 4X IP66, IP67 Suitable for Use in Wet Locations Marine Outside Type (Salt Water) Lamp Type Light Level LED 17 Hub Size (Inches) Catalog Numbers ➊ 3/4 MLEDW172P5 1 MLEDW173P5 1-1/4 MLEDS174P5 1-1/2 MLEDS175P5 1-1/4 MLEDR174P5 1-1/2 MLEDR175P5 Wall — Five Hubs, Four Close-Up Plugs Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting 25° Stanchion — One Hub LED 17 90° Stanchion — One Hub LED Suffix BU BH 1032 Voltage AC 120 - 277 347 - 480 17 Frequency 50/60 Hz 50/60 Hz Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ LED Luminaire Mounting Hoods and Ballast Bodies cETLus Certification. Enclosed and Gasketed Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Type 3R, 4X IP66, IP67 Suitable for Use in Wet Locations Marine Outside Type (Salt Water) Mounting Hoods Description Hub Size (Inches) Catalog Number Pendant One Hub, Rigid Mounting 3/4 KPA-75 1 KPA-100 3/4 KPCH-75 1 KPCH-100 Pendant Cone One Hub, Rigid Mounting Ceiling Lighting Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 3/4 KPWB-75 1 KPWB-100 Wall Five Hubs, Four Close-Up Plugs One Hub 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 90° Stanchion One Hub Replacement Globe Gaskets – Silicone Rubber Description Catalog Number KRF-GK Refractor Gasket Fixture Unit — Electrical Specification Catalog Number Current Draw Fuse Kit ➊ Fixture Unit Voltage Range Voltage Suffix 120 Vac @ .77 Amps 277 Vac @ .35 Amps F3 MLED17P5 120-277 Vac, 50/60 Hz BU 347 Vac @ .32 Amps 480 Vac @ .23 Amps F3 MLED17P5 347-480 Vac, 50/60 Hz BH ➊ Canadian Electrical Code does NOT allow fusing in hazardous locations V. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1033 Lighting: Enclosed and Gasketed — Area — LED/Induction 25° Stanchion PCD2 Series Factory Sealed Hazardous Location Photocontrol For Use in Class I, Division 2, Groups A, B, C, D Locations Maintains Class I, Division 2 rating for Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires, Mercmaster LED. Class I, Division 2, Groups A, B, C, D NEMA 4X Applications Materials • Encapsulated photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. • Typical applications include walkways, security areas and any other outdoor lighting application. • For use with Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires. • For remote mounting in FS Boxes. • Encapsulated with epoxy sealing compound • FS: aluminum Certifications and Compliances • UL Standard: 1604 – Hazardous (Classified) Locations • cULus Recognized Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting Features • Factory sealed design eliminates the need for an explosionproof enclosure. • Can be easily installed in the field. • Solid state design for performance and reliability. • Available for 120, 208, 240, or 277 volts. • 50-400 W HID, incandescent or fluorescent, 50/60 Hz. • 1000 VA Voltage/Ampere • Minimum time delay: 15 seconds to eliminate nuisance tripping. • Provided with (3) 18AWG stranded leads 6”/152.4 mm in length. • Will fit through standard 1/2” knockout. Factory-Installed Photocontrol Dimensions Add to fixture catalog after voltage; i.e.: KPWBL1075MTH1. Mercmaster III wall mounting hood with photocontrol installed shown Voltage Range Suffix Designation 120 V, 50/60 Hz H1 208 V, 50/60 Hz H2 240 V, 50/60 Hz H3 277 V, 50/60 Hz H4 1.13” 28.7 mm 1.13” 28.7 mm Photocontrol in FS Cover for Use with FS/FD Box Supplied with two stainless steel screws. For neoprene gasket, order catalog number FS-GKR-1N. Voltage Range Catalog Number 120V, 50/60 Hz FSKA-PC120D2 208-277V, 50/60 Hz FSKA-PC247D2 1.375” 34.9 mm 1.375” 34.9 mm 2.56” 65.0 mm 2.56” 65.0 mm 1.13” 28.7 mm Photocontrol for Field Installation Max. Current Catalog Number 120 V, 50/60 Hz Voltage Range 8.3 Amp PC120D2 208-277 V, 50/60 Hz 3.5 Amp 34.9 mm PC247D2 2.56” 65.0 mm 1034 1.375” 0.69” 17.5 mm 1.19” 30.2 mm 1.94” 49.2 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ LED Luminaire Dimensions 16.93”/ 430.0 mm 15.27”/ 387.9 mm cETLus Certification. Enclosed and Gasketed 18.63”/473.2 mm 9.25”/ 235.0 mm 77.6 mm 5.59”/ 142.0 mm 11.96”/ 303.8 mm 25° 15.40”/ 391.16 mm Dia. Dimensions in Inches/Millimeters 15.40”/391.16 mm Dia. WALL MOUNT 18.63”/473.2 mm 9.25”/ 15.27”/ 235.0 mm 387.9 mm 9.79”/248.7 mm Depends on Length of 9.25”/ Conduit Used 235.0 mm 18.63”/473.2 mm 10.93”/277.6 mm 17.22”/437.4 mm 5.59”/ 142.0 mm 5.59”/ 142.0 mm 11.96”/ 303.8 mm 4.06”/ 8.43”/ 103.1 mm mm 214.1 9.40”/ 238.8 mm PENDANT CONE MOUNT 15.27”/ 387.9 mm 16.93”/ mm 430.0 18.87”/479.3 mm 10.93”/277.6 mm 4.06”/ 103.1 mm 15.40”/391.16 mm Dia. 16.93”/ 430.0 mm ANGLE STANCHION MOUNT 7.56”/ 192.0 mm25° 9.40”/ 238.8 mm 25° 15.40”/ 391.16 mm 15.40”/391.16 mm Dia. Dia. 15.40”/391.16 mmmm Dia.Dia. 15.40”/391.16 15.40”/391.16 mm Dia. CEILING MOUNT PENDANT MOUNT WALL MOUNT 15.40”/391.16 mm Dia. 11.96”/ 303.8 mm 15.40”/ 391.16 mm Dia. 15.40”/391.16 mm Dia. STANCHION MOUNT ANGLE STANCHION MOUNT PENDANT CONE MOUNT 15.40”/391.16 mm Dia. Pendant Cone Mount 18.87”/479.3 mm ANGLE STANCHION MOUNT WALL MOUNT PENDANT CONE MOUNT 17.22”/437.4 mm 9.40”/ 238.8 mm PENDANT MOUNT 15.40”/391.16 mm Dia. 15.40”/391.16 mm Dia. CEILING MOUNT PENDANT MOUNT Ceiling Mount 9.40”/ 238.8 mm Wall Mount WALL MOUNT 15.40”/ 391.16 mm Dia. 15.40”/391.16 mm Dia. ANGLE STANCHION MOUNT WALL MOUNT PENDANT CONE MOUNT 16.93”/ 430.0 mm 8.43”/ 214.1 mm 18.87”/479.3 mm 15.27”/ 387.9 mm 18.63”/473.2 mm 25° STANCHION MOUNT 15.40”/391.16 mm Dia. STANCHION MOUNT 15.40”/391.16 mm Dia. 11.96”/ 303.8 mm 25° 15.40”/391.16 mm Dia. 5.59”/ 142.0 mm 15.40”/391.16 mm Dia. 17.22”/437.4 mm Depends on Length of Conduit Used 9.25”/ 235.0 mm 10.93”/277.6 mm 9.25”/ 235.0 mm 5.59”/ 142.0 mm 9.79”/248.7 mm 15.40”/391.16 mm Dia. CEILING MOUNT 8.43”/ 214.1 mm 7.56”/ 192.0 mm 11.96”/ 303.8 mm 25° 15.40”/391.16 mm Dia. 15.40”/ 391.16 mm Dia. 15.40”/391.16 mm Dia. 15.40”/391.16 mm Dia. CEILING MOUNT STANCHION MOUNT PENDANT MOUNT 15.40”/391.16 mm Dia. 15.40”/391.16 mm Dia. STANCHION MOUNT 25° ANGLE Stanchion Mount WALL MOUNT PENDANT CONE MOUNT 90° Stanchion Mount 18.87”/479.3 mm 17.22”/437.4 mm Depends on Length of Conduit Used 8.43”/ 214.1 mm 7.56”/ 192.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 15.40”/391.16 mm Dia. 15.40”/391.16 mm Dia. CEILING MOUNT 9.79”/248.7 mm PENDANT MOUNT 1035 15.40”/391.16 mm Dia. STANCHION MOUNT Lighting: Enclosed and Gasketed — Area — LED/Induction 4.06”/ 103.1 mm 18.63”/473.2 mm 4.06”/ 103.1 mm 7.56”/ 192.0 mm 15.40”/391.16 mm Dia. 9.25”/ 235.0 mm CEILING MOUNT 9.79”/248.7 mm 10.93”/277.6 mm 7.56”/ 192.0 mm 16.93”/ 8.43”/ 430.0 mm 214.1 mm 15.27”/ 387.9 mm 15.40”/391.16 mm Dia. 18.63”/473.2 mm 15.27”/ 387.9 mm 17.22”/437.4 mm Depends on Length of Conduit Used 8.43”/ 214.1 mm 16.93”/ 430.0 mm 9.79”/248.7 18.87”/479.3 mm mm Depends on Length of Conduit Used 10.93”/277.6 mm Lighting Pendant Mount ANGLE 15.40”/3 PEND Mercmaster™ LED Luminaire Weights and Photometric Data cETLus Certification. Enclosed and Gasketed Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting Mercmaster LED Ballast and Accessory Weights Description Weight in Lbs/Kg Fixture Unit Pendant Pendant Cone 22.00/10.0 2.25/1.0 2.50/1.1 Ceiling 3.00/1.4 Wall 4.00/1.8 25° Stanchion 3.25/1.5 90° Stanchion 3.75/1.7 Photometric Data 5 Degree Lumens 0-5 68 5-10 201 10-15 326 CIE Type – Direct REPORT NUMBER: MLED17P Lamps: MercMaster LED, Class 1, Div 2, Polycarbonate Optic Coefficients of Utilization – Zonal Cavity Method 15-20 445 20-25 546 25-30 624 % CeilingRcc 30-35 652 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 Effective Floor Cavity Reflectance 0.20 80 70 50 30 10 0 0 35-40 646 0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 100 40-45 610 1 111 108 104 102 109 106 103 100 101 99 97 98 96 94 94 93 91 89 45-50 556 2 103 97 91 87 101 95 90 86 91 87 84 88 85 82 85 83 80 78 50-55 473 3 96 87 80 75 93 85 79 74 83 77 73 80 75 72 77 74 70 69 55-60 355 4 88 78 71 65 86 77 70 65 75 69 64 72 67 63 70 66 62 60 60-65 213 65-70 96 70-75 25 75-80 7 Zonal Lumen Summary Zone 0-30 Lumens % Fixture 2212 37.8 5 82 71 63 57 80 70 62 57 68 61 56 66 60 56 64 59 55 53 6 76 64 56 51 74 64 56 51 62 55 50 60 54 50 59 53 49 48 7 71 59 51 45 69 58 51 45 57 50 45 55 49 45 54 49 44 43 8 66 54 46 41 65 53 46 41 52 45 41 51 45 40 50 44 40 38 80-85 5 0-40 3509 59.9 9 62 50 42 37 61 49 42 37 48 42 37 47 41 37 46 41 37 35 85-90 3 0-60 5503 94.0 10 58 46 39 34 57 46 39 34 45 38 34 44 38 34 43 37 33 32 5851 99.9 90-95 1 0-90 95-100 1 90-120 3 0.1 100-105 0 90-130 5 0.1 105-110 0 90-150 5 0.1 110-115 1 90-180 5 0.1 0-180 5856 100.0 115-120 1 120-125 1 125-130 1 130-135 0 135-140 0 140-145 0 145-150 0 150-155 0 155-160 0 160-165 0 165-170 0 170-175 0 175-180 0 1036 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaires Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC Applications Lighting • Areas where access for relamping is difficult, reliability is essential and the environment is costly to maintain. • Cold environment applications. • Enclosed and gasketed fixtures suitable for use in marine and wet locations, and in a wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by NEC Class I, Division 2. • Fixtures are also well suited for use in non-hazardous areas where severe weather conditions, excessive moisture, dirt, dust and corrosive atmospheres are a problem. • Typical applications include pulp and paper mills, processing plants, chemical plants, oil refineries, foundries, manufacturing plants, storage areas and marine applications. Fixtures have NEMA 4X listing. Features • • • • • • • • • • • • • • • • Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 165 Watt Ceiling Mount Fixture with Prismatic Glass Globe Standard Materials • Mounting hoods, ballast bodies and guards: cast copperfree (4/10 of 1% max.) aluminum • Exposed hardware: stainless steel; latch assemblies have stainless steel bolt and captive nut; reflectors and guards attach with stainless steel screws threading into stainless steel inserts • Reflectors: fiberglass reinforced white polyester • Globes: heat-resistant prismatic glass Standard Finishes • Mounting hoods, ballast bodies, guards: epoxy powder coat finish, electrostatically applied for complete, uniform surface protection • Reflectors: white polyester finish Options • Fuses can be field-installed on Mercmaster III fixtures. Kits include fuse block, wire connectors and screws for attaching to mounting hood. Fixtures with fuses do not comply with Marine Type Electric Fixtures Outside Type (Salt Water) requirements for marine listing. • Photocell optional for all fixtures except cone and ceiling mounts; provides automatic “on-off” control. Certifications and Compliances • UL Standard: UL 1598, UL 844, UL 1598A • CSA Standard: C22.2 No. 250, C22.2 No. 137 • cCSAus Certified 1037 Lighting: Enclosed and Gasketed — Area — LED/Induction • • Instant start and restrike. High lumen output and efficacy (up to 73 lumens per Watt). Fixtures operate safely in a 104 °F/40 °C ambient. Good lumen maintenance provides less than 30% depreciation after 60K hours of operation. Virtually maintenance free. Ultra long 100,000 hours of life keeps maintenance costs to a minimum. Starts in temperatures as low as -40 °F/-40 °C. Low total harmonic distortion (less than 10%). No cycling at end of life. Modular design allows scores of fixture component combinations to meet installation and lighting needs. Mounting hoods include cone-shaped pendant, standard pendant, flexible pendant, ceiling and wall (tapped for 3/4” or 1” NPT), 25° angle stanchion and straight stanchion (both tapped for 1-1/4” or 1-1/2” NPT). Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers, and inhibit build-up that “insulates” fixture and slows heat transfer. Also provide increased surface area for more effective heat dissipation. Reflector choice includes standard dome and 30º angle types, both made of fiberglass reinforced white polyester. Highly resistant to unusually corrosive applications. Reflectors are vented for cooler, dirt-free operation and maintained lumen output. They secure to ballast housing with stainless steel screws threading into stainless steel inserts. For high corrosion resistance, fixture housing, mounting hoods and guards are copperfree (4/10 of 1% max.) cast aluminum with baked epoxy finish, electrostatically applied for uniformity. All exposed hardware is stainless steel. Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360º compression at all points on ballast housing gasket for positive sealing. Swing-away design of captive bolt and nut simplifies servicing. Body gaskets and globe gaskets are high-temperature silicone rubber. All Mercmaster III mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listings in this catalog section). For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing. Mercmaster™ III Induction Luminaires Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC Lighting Illustrated Features Aluminum Inner Reflector Solid aluminum inner reflector improves photometric efficiency. Lighting: Enclosed and Gasketed — Area — LED/Induction Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Rugged, Vented Reflectors Reflectors are thick, tough fiberglass reinforced white polyester, vented for cooler operation. Quickly attach with stainless steel screws provided. Threaded Stainless Steel Inserts for Screws Fixture bodies have stainless steel threaded inserts to receive stainless steel screws for reflector and guard. Prevents “freezing”, allowing guards and reflectors to be easily removed and replaced at any time, without damage to the housing. Prismatic Glass Globes, Refractors and Enclosed Reflector Heat-resistant globes, refractors and enclosed reflectors thread into ballast housing and seal against a hightemperature silicone rubber gasket. Fuses Mount to Hood Bosses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. 1038 Mounting Hood and Globe Gaskets Silicone rubber gaskets seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. Cooler Operating Cone Hood Sloped surface sheds insulating dust, dirt, and combustible fibers. Provides cleaner, larger surface area for better heat dissipation. Photocell Available for all fixtures except cone and ceiling mount. Installs through knock-out in mounting hood. Provides continuous ON-OFF dusk-to-dawn control. “Safety” High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaires Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC “T” Numbers for Mercmaster III Induction Fixtures — Class I, Division 2 and Class II, Division 1 and 2 Class I, Division 2, Groups A, B, C, D NEC/CEC V Temp. Indent. Number Nameplate Marking Class II, Division 1 and 2, Groups E, F, G NEC/CEC V Temp. Indent. Number Nameplate Marking Lamp Type Supply Wire Temp. (°F/°C) Ambient Temp. (°F/°C) Input Voltage 55 Induction 194/90 104/40 100-120 T3A — — T6 — — 55 Induction 194/90 104/40 200-277 T3B — — T6 — — 85 Induction 194/90 104/40 100-120 T3A — — T6 — — Lamp Watts with Globe or with with Enclosed Globe and Reflector Refractor Reflector with Globe or Globe and Reflector with with Enclosed Refractor Reflector Induction 194/90 104/40 200-277 T3A — — T6 — — Induction 194/90 104/40 100-120 T3 T3 T3 T5 T5 T5 165 Induction 194/90 104/40 200-277 T3 T3 T3 T5 T5 T5 Lighting 85 165 “T” Numbers for Mercmaster III Induction Fixtures — Class I, Zone 2 Lamp Type Supply Wire Temp. (°F/°C) Ambient Temp. (°F/°C) Input Voltage 55 Induction 194/90 104/40 55 Induction 194/90 85 Induction 194/90 85 Induction 165 165 Lamp Watts Class I, Zone 2 AEx nR IIC / Ex nR IIC with Globe with Globe and Reflector with Globe with Globe and Reflector with Refractor Reflector with Lens 100-120 T4 T4 — — — — 104/40 200-277 T4 T4 — — — — 104/40 100-120 T4 T4 — — — — 194/90 104/40 200-277 T4 T4 — — — — Induction 194/90 104/40 100-120 — — T5 T5 — T5 Induction 194/90 104/40 200-277 — — T5 T5 — T5 “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (°C) 351- 450 326- 350 301- 325 281- 300 261- 280 231- 260 216- 230 201- 215 181- 200 166- 180 161- 165 136- 160 121- 135 101- 86-100 120 85 V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1039 Lighting: Enclosed and Gasketed — Area — LED/Induction Class I, Zone 2 AEx nA nR IIC / Ex nA nR IIC Mercmaster™ III Induction Luminaires Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC 55W, 85W ➎➏ Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC Type Mounting Lamp Watts Hub Size (Inches) Catalog Numbers ➊➋➌ with Globe Pendant 55 ➎➏ One Hub Rigid Mounting ➍ 85 ➎➏ 165 Shown with 55 Watt Globe 3/4 MLAQ552G3N 1 MLAQ553G3N 3/4 MLAQ852G4N 1 MLAQ853G4N 3/4 KPAQ1652G4N 1 KPAQ1653G4N 3/4 MLDQ552G3N 1 MLDQ553G3N 3/4 MLDQ852G4N 1 MLDQ853G4N 3/4 KPDQ1652G4N 1 KPDQ1653G4N 3/4 MLCQ552G3N 1 MLCQ553G3N 3/4 MLCQ852G4N 1 MLCQ853G4N 3/4 KPCQ1652G4N 1 KPCQ1653G4N Lighting Pendant Cone Hood 55 ➎➏ Lighting: Enclosed and Gasketed — Area — LED/Induction One Hub Rigid Mounting 85 ➎➏ 165 Shown with 55 Watt Globe Ceiling 55 ➎➏ Five Hubs Four Close-Up Plugs 85 ➎➏ Shown with 55 Watt Refractor 165 ➊ Add voltage suffix -A1 for 120 Vac: 90-140 Vac; -A6 for 277: 180-305 Vac. ➋ See following pages for accessory ordering information. ➌ For fixtures with guard, substitute G for N before adding suffix. ➍ For flexible pendant mount, change A to F in catalog number. ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). ➏ Add Z suffix for factory sealed non-sparking/restricted breathing protection (Ex nA nR) V. V CSA Certification Only. 1040 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaires Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC 55W, 85W ➎➏ Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC Type Mounting Lamp Watts Hub Size (Inches) Catalog Numbers ➊➋➌ with Globe Wall 55 ➎➏ Five Hubs Four Close-Up Plugs 85 ➎➏ 165 Shown with 85 Watt Globe 3/4 MLWQ552G3N 1 MLWQ553G3N 3/4 MLWQ852G4N 1 MLWQ853G4N 3/4 KPWQ1652G4N 1 KPWQ1653G4N 55 ➎➏ One Hub 85 ➎➏ MLSQ554G3N 1-1/2 MLSQ555G3N 1-1/4 MLSQ854G4N 1-1/2 MLSQ855G4N 1-1/4 KPSQ1654G4N 1-1/2 KPSQ1655G4N 1-1/4 MLRQ554G3N 1-1/2 MLRQ555G3N 1-1/4 MLRQ854G4N 1-1/2 MLRQ855G4N 1-1/4 KPRQ1654G4N 1-1/2 KPRQ1655G4N Lighting: Enclosed and Gasketed — Area — LED/Induction 165 Shown with 55 Watt Globe 1-1/4 Lighting 25° Stanchion Straight Stanchion 55 ➎➏ One Hub 85 ➎➏ Shown with 55 Watt Globe 165 ➊ Add voltage suffix -A1 for 120 Vac: 90-140 Vac; -A6 for 277: 180-305 Vac. ➋ See following pages for accessory ordering information. ➌ For fixtures with guard, substitute G for N before adding suffix. ➎ Add Z2 suffix for factory sealed non-sparking/restricted breathing protection (AEx nA nR). ➏ Add Z suffix for factory sealed non-sparking/restricted breathing protection (Ex nA nR). V V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1041 Mercmaster™ III Induction Luminaire Mounting Hoods Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC Description 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC Hub Size (Inches) Catalog Number Pendant One Hub, Rigid Mounting 3/4 KPA-75 1 KPA-100 One Hub, Flexible Mounting 3/4 KPAF-75 1 KPAF-100 Cone Hood Rigid Mounting 3/4 KPCH-75 1 KPCH-100 Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 Five Hubs, Four Close-Up Plugs 3/4 KPWB-75 1 KPWB-100 Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting Pendant — Flexible Pendant Cone Ceiling Wall 25° Stanchion One Hub 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 90° Stanchion One Hub 1042 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaire Fixture Units Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC Fixture Units — Less Mounting Hoods Type Fixture Unit Catalog Number Add Voltage Suffixes 120 V 277 V Frequency Lamp Watts Induction 50/60 Hz 55 MLBRG355Q -A1 -A6 Induction 50/60 Hz 85 MLBRG485Q -A1 -A6 Induction 50/60 Hz 165 KPB165QG4 -A1 -A6 Induction 50/60 Hz 165 KPB165QRL -A1 -A6 Induction 50/60 Hz 165 KPB165QJ2 -A1 -A6 Induction 50/60 Hz 165 KPB165QJ5 -A1 -A6 Globe Globe Lighting Globe Lighting: Enclosed and Gasketed — Area — LED/Induction Enclosed Reflector/Lens Type 2 Refractor Type 5 Refractor Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1043 Mercmaster™ III Induction Luminaire Accessories and Replacement Parts Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC Item 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC Description Watts Catalog Number Standard Dome 55 W, 85 W, 165 W CMR-4ST ➊ Deep Dome (Dark Skies Compliant) 55 W, 85 W, 165 W CMR-4DD ➊ 30º Angle 55 W, 85 W, 165 W CMR-4AN ➊ White Polyester Reflectors Lighting Prismatic Glass Globes – Heat-Resistant Clear 55 W VPGL-3HR Clear 85 W, 165 W VPGL-4HR Closed Glass Refractor NEMA Type II Heat- and impact-resistant glass lens. 165 W KPRF4002 Closed Glass Refractor NEMA Type V 165 W KPRF4005 Enclosed Reflector/Lens 165 W KPR-4HB 55 W KRG2 Lighting: Enclosed and Gasketed — Area — LED/Induction Refractor/Reflector Assemblies Guards 85 W, 165 W KPGU400 Mercmaster III Fixture Unit, Component and Accessory Weights ➋ Fixture Unit and Mounting Hoods 55W and 85W Fixture 165W Fixture Pendant Pendant Cone Ceiling Wall 25º Stanchion 90º Stanchion Wt. lbs/kg 28.00/12.7 33.00/15.0 2.25/1.0 2.50/1.1 3.00/1.4 4.00/1.8 3.25/1.5 3.33/1.5 Reflectors Standard Dome 30º Angle Deep Dome Wt. lbs/kg 2.50/1.1 2.50/1.1 3.50/1.6 Refractors, Globes & Guard Glass Globe Globe Guard Wt. lbs/kg 3.75/1.7 1.00/0.5 ➊ Standard and deep dome reflectors may interfere with bottom conduit entry if used with KPST and KPWB mounting hoods. ➋ Weights are approximate. 1044 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaire Technical Data Enclosed and Gasketed. For Hazardous and Adverse Locations 55W, 85W, 165W Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G NEMA 4X 55W, 85W Class I, Zone 2 AEx nA nR, IIC Ex nA nR IIC 165W Class I, Zone 2 AEx nR, IIC Ex nR IIC Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily to hood with one screw. ➊ Lamp Watts 55, 85, 165 Volts 120/277 208-240 Fuse Qty. Req. 1 2 Fuse Catalog Number F2 F2 Electromagnetic Compatibility A.) Complies with European norms EN55015, EN6100-3-2 and EN61547 B.) RFI a.) Meets standard EN55022 and is valid for frequencies up to 1000 MHz. Electrical Characteristics MHz MHz MHz kV mA 85 W 100-120 V 85 82 88 120 90 140 120 90 180 60 47 63 730 16 170 >0.92 2.65 2.3 3 1.5 <0.5 200Vac 85 W 200-277 V 85 82 88 230 180 305 230 180 350 50 47 63 400 12 170 >0.92 2.65 2.3 3 1.5 <0.5 400Vac 165 W 100-120 V 165 160 190 120 90 140 120 90 180 60 47 63 1420 28 150 >0.92 2.65 2.3 3.0 1.5 <0.5 200Vac 165 W 200-277 V 165 160 190 230 180 305 230 180 350 50 47 63 740 24 140 >0.92 2.65 2.3 3.0 1.5 <0.5 400Vac Lamp Characteristics Values at 100 Hrs. Luminous flux nom. Luminous flux min. Luminous flux max. System efficacy nom. lm lm lm lm/W QL 55 W 3,500 3,200 3,800 63.5 QL 85 W 6,000 5,500 6,500 70 QL 165 W 12,000 11,000 12,500 72.5 Lamp Operation A.) Ignition and Lifetime Performance a.) Ignition time <0.5 seconds Hot Restrike time <0.5 seconds b.) Induction lighting offers a direct, flicker-free ignition after switch-on, in both cold and hot conditions B.) Lumen Maintenance a.)The lumens of an induction lamp are expected to have depreciated after 60,000 hours to no less than 75% of the initial lumens ➊ Canadian Electrical Code does NOT allow fusing in hazardous locations V. ➋ At design voltage. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1045 Lighting: Enclosed and Gasketed — Area — LED/Induction W W W V V V V V V Hz Hz Hz mA A usec 55 W 200-277 V 55 53.1 56.9 230 180 305 230 180 350 50 47 63 260 12 170 >0.92 2.65 2.3 3 1.5 <0.5 400Vac Lighting System power ➋ nom. System power ➋ min. System power ➋ max. AC supply voltage nom. AC supply voltage min. AC supply voltage max. DC supply voltage nom. DC supply voltage min. DC supply voltage max. Supply frequency nom. Supply frequency min. Supply frequency max. Supply current nom. Inrush current max. Duration inrush current max. Power factor nom. HF output frequency nom. HF output frequency min. HF output frequency max. HF output voltage max. Leakage current Overvoltage 55 W 100-120 V 55 53.1 56.9 120 90 140 120 90 180 60 47 63 460 16 170 >0.92 2.65 2.3 3 1.5 <0.5 200Vac Mercmaster™ III Induction Luminaire Dimensions Enclosed and Gasketed. For Hazardous and Adverse Locations 13.44"/ 341.4 mm 11.82"/ 300.2 mm 10.38"/ 263.7 mm 10.25"/ 260.4 mm 10.77"/ 273.6 mm Lighting 11.44"/ 290.6 mm 12.25"/ 311.2 mm Dia. 14.25"/ 362.0 mm Dia. 1046 10.52”/ 267.2 mm 11.32"/ 287.5 mm 15.72"/ 399.3 mm 15.17"/ 385.3 mm 14.81"/ 376.2 mm 10.52"/ 267.2 mm 85 Watt 12.37"/ 314.2 mm 14.81"/ 376.2 mm 4.24”/ 107.7 mm 165 Watt Ceiling Mount with Refractor, Enclosed Reflector and Guards 4.24"/ 107.7 mm Lighting: Enclosed and Gasketed — Area — LED/Induction 165 Watt Pendant with Globe, Guard and Reflectors 16.38"/ 416.1 mm Dia. 16.63"/ 422.4 mm Dia. 55 Watt Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaire Dimensions Enclosed and Gasketed. For Hazardous and Adverse Locations Pendant (Rigid or Flex) Pendant Cone 12.06"/ 306.3 mm Ceiling 13.62"/ 346.9 mm 12.06"/ 306.3 mm 12.06"/ 306.3 mm 1.17"/ 29.7 mm 5.59"/ 142.0 mm 1.75"/ 44.5 mm 25° Stanchion 5”/ 9.2 0 mm . 5 23 25° 0”/ 2.0 mm 8 . 50 ”/ .03 m 12 .6 m 5 30 9.79”/ 248.7 mm SET SCREW Wall Mount 17.00"/ 431.8 mm 10.93”/ 277.6 mm 12.03”/ 305.6 mm 12.03”/ 305.6 mm Lighting: Enclosed and Gasketed — Area — LED/Induction t Se w re Sc 17.23”/ 437.6 mm Lighting / 27” 15. .9 mm 7 38 90° Stanchion 3.36"/ 85.3 mm 1.57"/ 39.9 mm 9”/ 7.5 8 mm . 2 19 4.06"/ 103.1 mm 2.03"/ 51.6 mm Standard Polyester Reflector 30º Angle Polyester Reflector Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Deep Dome 1047 PCD2 Series Factory Sealed Hazardous Location Photocontrol For Use in Class I, Division 2, Groups A, B, C, D Locations Maintains Class I, Division 2 rating for Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires, Mercmaster LED. Class I, Division 2, Groups A, B, C, D NEMA 4X Applications Materials • Encapsulated photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. • Typical applications include walkways, security areas and any other outdoor lighting application. • For use with Mercmaster III – Low Profile, Mercmaster III, and Mercmaster III – 400 Series Luminaires. • For remote mounting in FS Boxes. • Encapsulated with epoxy sealing compound • FS: aluminum Certifications and Compliances • UL Standard: 1604 – Hazardous (Classified) Locations • cULus Recognized Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting Features • Factory sealed design eliminates the need for an explosionproof enclosure. • Can be easily installed in the field. • Solid state design for performance and reliability. • Available for 120, 208, 240, or 277 volts. • 50-400 W HID, incandescent or fluorescent, 50/60 Hz. • 1000 VA Voltage/Ampere • Minimum time delay: 15 seconds to eliminate nuisiance tripping. • Provided with (3) 18AWG stranded leads 6”/152.4mm in length. • Will fit through standard 1/2” knockout. Factory-Installed Photocontrol Dimensions Add to fixture catalog after voltage; i.e.: KPWBL1075MTH1. Mercmaster III wall mounting hood with photocontrol installed shown Voltage Range Suffix Designation 120 V, 50/60 Hz H1 208 V, 50/60 Hz H2 240 V, 50/60 Hz H3 277 V, 50/60 Hz H4 1.13” 28.7 mm 1.13” 28.7 mm Photocontrol in FS Cover for Use with FS/FD Box Supplied with two stainless steel screws. For neoprene gasket, order catalog number FS-GKR-1N. Voltage Range Catalog Number 120V, 50/60 Hz FSKA-PC120D2 208-277V, 50/60 Hz FSKA-PC247D2 1.375” 34.9 mm 1.375” 34.9 mm 2.56” 65.0 mm 2.56” 65.0 mm 1.13” 28.7 mm Photocontrol for Field Installation Max. Current Catalog Number 120 V, 50/60 Hz Voltage Range 8.3 Amp PC120D2 208-277 V, 50/60 Hz 3.5 Amp 34.9 mm PC247D2 2.56” 65.0 mm 1048 1.375” 0.69” 17.5 mm 1.19” 30.2 mm 1.94” 49.2 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaire 55 W Photometric Data Enclosed and Gasketed. For Hazardous and Adverse Locations Total Luminaire Efficiency = 78% CIE Type – General Diffuse REPORT NUMBER: MLBR55QL Lamps: 55 W QL lamp with Globe only Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 110-120 254.71 120-130 130-140 140-150 150-160 160-170 170-180 184.93 87.45 16.45 16.70 0.05 0.00 Total Luminaire Efficiency = 68.6% CIE Type – Direct Spacing Criteria: 1.40 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 85 73 65 59 53 48 44 41 38 35 33 79 68 60 54 49 44 41 38 35 32 30 69 54 45 38 33 29 26 24 21 19 18 59 45 37 32 28 24 22 20 18 16 15 50 37 31 26 22 20 18 16 15 13 12 0 1 2 3 4 5 6 7 8 9 10 85 68 57 49 43 38 33 30 27 24 22 85 64 51 42 35 30 26 23 20 18 16 85 59 45 36 29 24 21 18 15 14 12 79 63 53 45 39 35 31 28 25 23 21 79 59 47 39 33 28 24 21 19 17 15 79 55 42 33 27 23 19 17 14 13 11 69 51 40 33 28 24 21 18 16 14 13 69 48 36 29 23 20 17 14 12 11 10 59 43 34 28 23 20 17 15 14 12 11 59 40 31 24 20 16 14 12 10 9 8 50 35 28 23 19 16 14 12 11 10 9 50 34 25 20 16 13 11 10 9 8 7 46 30 22 17 13 11 9 8 7 6 5 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 173.63 318.76 743.26 1597.39 % Lamp 5.0 9.1 21.2 45.6 % Fixture 6.4 11.7 27.2 58.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 842.61 1027.54 1131.69 1132.40 2729.80 % Lamp 24.1 29.4 32.3 32.4 78.0 % Fixture 30.9 37.6 37.6 41.5 100.0 REPORT NUMBER: MLBR55QLST Lamps: 55 W QL lamp with Standard Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 53.72 151.63 237.12 314.91 369.39 394.66 389.48 306.69 141.30 20.15 4.14 110-120 4.10 120-130 130-140 140-150 150-160 160-170 170-180 5.12 4.61 1.93 0.37 0.11 0.04 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 81 72 67 58 52 48 44 41 38 35 33 79 70 62 56 51 46 43 39 37 34 32 76 63 53 46 40 35 32 29 26 24 22 72 60 51 44 38 34 30 28 25 23 21 69 57 48 42 37 32 29 23 24 22 21 0 1 2 3 4 5 6 7 8 9 10 81 68 57 49 43 38 34 31 28 25 23 81 64 52 43 36 31 27 24 21 19 17 81 61 47 38 31 26 22 19 17 15 14 79 66 56 48 42 37 33 30 27 25 23 79 63 51 42 36 31 27 24 21 19 17 79 60 46 37 31 26 22 19 17 15 14 76 60 49 41 34 30 26 23 21 19 17 76 57 45 36 30 25 22 19 17 15 13 72 58 47 39 33 29 25 22 20 18 17 72 55 44 35 29 25 21 19 17 15 13 69 55 45 38 32 28 25 22 20 18 16 69 54 43 35 29 25 21 18 16 15 13 67 52 14 33 27 23 20 17 15 13 12 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 442.48 757.38 1521.42 2358.89 % Lamp 12.6 21.6 43.5 67.4 % Fixture 18.4 31.6 63.4 98.3 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 28.39 33.51 40.05 40.58 2399.47 % Lamp 0.8 1.0 1.1 1.2 68.6 % Fixture 1.2 1.4 1.4 1.7 100.0 1049 Lighting: Enclosed and Gasketed — Area — LED/Induction Lumens 20.62 57.15 95.87 145.23 191.57 232.82 266.04 288.86 299.24 299.72 288.18 80 Lighting Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 % Ceiling Rcc Mercmaster™ III Induction Luminaire 55 W Photometric Data Enclosed and Gasketed. For Hazardous and Adverse Locations Total Luminaire Efficiency = 61.1% CIE Type – Direct Spacing Criteria: 1.80 REPORT NUMBER: MLBR55QLAN Lamps: 55 W QL lamp with 30° Angle Dome Reflector Coefficients of Utilization - Zonal Cavity Method Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting Effective Floor Cavity Reflectance 0.20 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 42.29 134.14 213.06 282.99 314.71 306.62 275.85 232.10 171.94 100.63 40.56 110-120 9.45 120-130 130-140 140-150 150-160 160-170 170-180 3.75 2.43 0.97 0.34 0.25 0.06 Total Luminaire Efficiency = 59.2% CIE Type – Direct Spacing Criteria: 1.58 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 72 63 57 51 47 43 39 36 34 31 29 69 61 55 49 45 41 38 35 32 30 28 65 54 46 40 35 31 28 25 23 21 20 62 51 43 38 33 29 27 24 22 20 19 58 48 41 35 31 28 25 23 21 19 18 0 1 2 3 4 5 6 7 8 9 10 72 59 51 44 38 34 30 27 25 23 21 72 56 46 38 32 28 25 22 19 18 16 72 53 42 34 28 24 20 18 16 14 13 69 58 49 43 37 33 30 27 24 22 20 69 55 45 37 32 27 24 21 19 17 16 69 52 41 33 27 23 20 18 15 14 12 65 52 42 35 30 26 23 21 18 17 15 65 49 39 32 27 23 20 17 15 13 12 62 49 40 34 29 25 22 20 18 16 15 62 47 37 31 26 22 19 17 15 13 12 58 46 38 32 28 24 21 19 17 16 14 58 45 36 30 25 21 18 16 14 13 12 57 42 34 28 23 20 17 15 13 12 10 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 394.49 677.48 1298.80 1978.69 % Lamp 11.3 19.4 37.1 56.5 % Fixture 18.5 31.7 60.8 92.6 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 150.64 154.39 157.79 158.45 2137.14 % Lamp 4.3 4.4 4.5 4.5 61.1 % Fixture 7.0 7.2 7.2 7.4 100.0 REPORT NUMBER: MLBR55QLHB Lamps: 55 W QL lamp with High Bay Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lumens 64.78 196.79 326.97 437.52 470.90 345.47 167.60 52.79 7.73 0.00 0.00 0.14 120-130 130-140 140-150 150-160 160-170 170-180 0.26 0.16 0.24 0.00 0.04 0.02 1050 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 70 65 60 55 50 46 43 40 37 34 32 69 64 58 54 49 45 42 39 36 34 31 66 59 52 47 42 37 34 31 28 26 24 63 57 51 45 40 36 33 30 27 25 23 60 55 49 44 39 35 32 29 26 24 22 0 1 2 3 4 5 6 7 8 9 10 70 63 56 49 44 39 35 32 29 27 24 70 61 52 45 39 34 30 27 24 22 20 70 59 49 41 35 30 27 23 21 19 17 69 62 54 48 43 39 35 31 29 26 24 69 60 51 44 39 34 30 27 24 22 20 69 58 48 41 35 30 26 23 21 19 17 66 57 40 43 38 33 29 26 24 21 19 66 56 47 40 35 30 26 23 21 18 17 63 55 48 42 37 32 29 26 23 21 19 63 54 46 40 34 30 26 23 20 18 17 60 54 47 41 36 32 28 25 23 21 19 60 53 45 39 34 29 26 23 20 18 17 59 51 44 38 32 28 25 22 19 17 15 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 588.53 1026.05 1842.43 2070.54 % Lamp 16.8 29.3 52.6 59.2 % Fixture 28.4 49.5 88.9 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.14 0.41 0.81 0.87 2071.41 % Lamp 0.0 0.0 0.0 0.0 59.2 % Fixture 0.0 0.0 0.0 0.0 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaire 85 W Photometric Data Enclosed and Gasketed. For Hazardous and Adverse Locations Total Luminaire Efficiency = 78.4% CIE Type – General Diffuse REPORT NUMBER: MLBR85QL Lamps: 85 W QL lamp with Globe only Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls 110-120 439.16 120-130 318.85 130-140 140-150 150-160 160-170 170-180 150.78 28.79 1.15 0.08 0.00 Total Luminaire Efficiency = 69% CIE Type – Direct Plane Spacing Criteria 0-180 1.40 90-270 1.40 Diagonal 1.58 110-120 7.07 8.83 7.95 3.33 0.64 0.19 0.07 10 0 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 86 74 66 59 53 49 45 41 38 35 33 80 68 60 54 49 45 41 38 35 33 30 69 54 45 39 34 30 26 24 21 20 18 59 46 38 32 28 25 22 20 18 16 15 50 38 31 26 23 20 18 16 15 13 12 86 69 58 49 43 38 34 30 27 25 23 86 64 51 42 35 30 26 23 20 18 16 86 60 46 36 29 25 21 18 16 14 12 80 64 53 46 40 35 31 28 25 23 21 80 59 47 39 33 28 24 21 19 17 15 80 56 42 34 27 23 19 17 14 13 11 69 51 41 33 28 24 21 18 16 15 13 69 48 36 29 24 20 17 14 12 11 10 59 43 34 28 23 20 17 15 14 12 11 59 41 31 24 20 17 14 12 11 9 8 50 36 28 23 19 16 14 13 11 10 9 50 34 25 20 16 13 11 10 9 8 7 46 30 22 17 13 11 9 8 7 6 5 Lumens 299.37 549.76 1281.48 2754.13 % Lamp 5.0 9.2 21.4 45.9 % Fixture 6.4 11.7 27.2 58.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1452.77 1771.62 1951.19 1952.42 4706.55 % Lamp 24.2 29.5 32.5 32.5 78.4 % Fixture 30.9 37.6 37.6 41.5 100.0 REPORT NUMBER: MLBR85QLST Lamps: 85 W QL lamp with Standard Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lumens 92.63 261.43 408.83 542.94 636.87 680.44 671.51 528.78 243.62 34.74 7.14 120-130 130-140 140-150 150-160 160-170 170-180 30 70 50 30 10 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 50 70 50 30 10 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 82 73 65 58 53 48 44 41 38 35 33 80 70 63 56 51 47 43 40 37 34 32 76 63 54 46 40 36 32 29 26 24 22 72 60 51 44 38 34 31 28 25 23 21 69 58 49 42 37 33 29 27 24 22 21 82 68 58 50 43 38 34 31 28 25 23 82 65 52 43 36 31 27 24 21 19 18 82 61 47 38 31 26 22 19 17 15 14 80 67 56 48 42 37 33 30 27 25 23 80 63 51 42 36 31 27 24 21 19 17 80 60 47 37 31 26 22 19 17 15 14 76 60 49 41 35 30 26 23 21 19 17 76 58 45 37 30 25 22 19 17 15 13 72 58 47 39 34 29 25 23 20 18 17 72 56 44 36 30 25 22 19 17 15 13 69 56 46 38 33 28 25 22 20 18 16 69 54 43 35 29 25 21 19 16 15 13 68 52 41 33 27 23 20 17 15 13 12 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 762.89 1305.83 2623.14 4067.06 % Lamp 12.7 21.8 43.7 67.8 % Fixture 18.4 31.6 63.4 98.3 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 48.95 57.78 69.06 69.96 4137.02 % Lamp 0.8 1.0 1.2 1.2 69.0 % Fixture 1.2 1.4 1.4 1.7 100.0 1051 Lighting: Enclosed and Gasketed — Area — LED/Induction Lumens 35.55 98.53 165.29 250.39 330.30 401.42 458.68 498.03 515.94 516.75 496.86 70 Rw Lighting Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 80 Mercmaster™ III Induction Luminaire 85 W Photometric Data Enclosed and Gasketed. For Hazardous and Adverse Locations Total Luminaire Efficiency = 61.4% CIE Type – Direct Plane Spacing Criteria 0-180 1.80 90-270 1.44 Diagonal 1.54 REPORT NUMBER: MLBR85QLAN Lamps: 85 W QL lamp with 30° Angle Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 81.53 231.27 367.34 487.91 542.61 528.65 475.60 400.17 296.45 173.50 69.93 110-120 16.29 120-130 6.47 130-140 140-150 150-160 160-170 170-180 4.19 1.67 0.59 0.44 0.10 Total Luminaire Efficiency = 59.5% CIE Type – Direct Plane Spacing Criteria 0-180 1.58 90-270 1.58 Diagonal 1.58 110-120 0.25 0.46 0.28 0.41 0.00 0.07 0.04 1052 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 72 64 57 52 47 43 39 36 34 32 30 70 61 55 49 45 41 38 35 33 30 29 66 54 46 40 35 31 28 25 23 21 20 62 51 44 38 33 30 27 24 22 20 19 58 48 41 36 31 28 25 23 21 19 18 72 60 51 44 39 34 31 28 25 23 21 72 56 46 38 33 28 25 22 20 18 16 72 53 42 34 28 24 20 18 16 14 13 70 58 49 43 38 33 30 27 24 22 21 70 55 45 37 32 28 24 21 19 17 16 70 52 41 33 28 23 20 18 16 14 12 66 52 43 36 31 26 23 21 19 17 15 66 50 39 32 27 23 20 17 15 14 12 62 49 40 34 29 25 22 20 18 16 15 62 47 38 31 26 22 19 17 15 13 12 58 46 38 32 28 24 21 19 17 16 14 58 45 36 30 25 21 19 16 14 13 12 57 43 34 28 23 20 17 15 13 12 11 Lumens 680.15 1168.06 2239.32 3411.54 % Lamp 11.3 19.5 37.3 56.9 % Fixture 18.5 31.7 60.8 92.6 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 259.73 266.19 272.06 273.19 2684.73 % Lamp 4.3 4.4 4.5 4.6 61.4 % Fixture 7.0 7.2 7.2 7.4 100.0 REPORT NUMBER: MLBR85QLHB Lamps: 85 W QL lamp with High Bay Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lumens 111.69 339.29 563.74 754.34 811.90 595.64 288.96 91.02 13.32 0.00 0.00 120-130 130-140 140-150 150-160 160-170 170-180 70 Rw Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 80 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 71 66 60 55 51 47 43 40 37 35 32 69 64 59 54 49 45 42 39 36 34 32 66 59 53 47 42 38 34 31 28 26 24 63 57 51 45 40 36 33 30 27 25 23 61 55 49 44 39 35 32 29 27 24 23 71 63 56 50 44 39 35 32 29 27 25 71 61 52 45 39 34 30 27 24 22 20 71 59 49 42 35 31 27 24 21 19 17 69 62 55 49 43 39 35 32 29 26 24 69 60 51 44 39 34 30 27 24 22 20 69 58 49 41 35 30 27 23 21 19 17 66 58 50 43 38 33 30 26 24 22 20 66 56 48 40 35 30 26 23 21 19 17 63 56 49 42 37 33 29 26 23 21 19 63 55 46 40 34 30 26 23 21 18 17 61 54 47 41 36 32 29 26 23 21 19 61 53 45 39 34 29 26 23 20 18 17 59 52 44 38 33 28 25 22 19 17 16 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 1014.71 1769.06 3176.60 3569.90 % Lamp 16.9 29.5 52.9 59.5 % Fixture 28.4 49.5 88.9 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.25 0.70 1.39 1.50 3571.40 % Lamp 0.0 0.0 0.0 0.0 59.5 % Fixture 0.0 0.0 0.0 0.0 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Induction Luminaire 165 W Photometric Data Enclosed and Gasketed. For Hazardous and Adverse Locations Total Luminaire Efficiency = 70.7% CIE Type – General Diffuse REPORT NUMBER: KPB165QLG Lamps: 165 W QL lamp with Globe only Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls 110-120 758.05 120-130 130-140 140-150 150-160 160-170 170-180 568.50 328.65 119.26 15.42 0.71 0.05 Total Luminaire Efficiency = 58.5% CIE Type – Direct Plane Spacing Criteria 0-180 1.34 90-270 1.34 Diagonal 1.56 Lumens 149.58 419.79 669.69 893.40 1052.06 1151.10 1157.87 920.80 462.02 95.45 12.02 10.92 120-130 130-140 140-150 150-160 160-170 170-180 11.39 11.34 5.50 1.16 0.07 0.12 30 10 0 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 77 66 59 53 48 44 40 37 34 32 30 72 61 54 49 44 40 37 34 31 29 27 62 49 40 34 30 26 23 21 19 17 16 53 41 34 28 25 22 19 17 16 15 13 45 33 27 23 20 17 16 14 13 12 11 77 62 52 44 38 34 30 27 24 22 20 77 57 46 38 32 27 23 20 18 16 14 77 54 41 32 26 22 19 16 14 12 11 72 57 48 41 36 31 28 25 22 20 19 72 53 42 35 29 25 22 19 17 15 13 72 50 38 30 24 20 17 15 13 11 10 62 46 36 30 25 21 18 16 14 13 12 62 43 33 26 21 17 15 13 11 10 9 53 38 30 25 21 18 15 14 12 11 10 53 36 27 22 17 15 12 11 9 8 7 45 32 25 20 17 14 12 11 10 9 8 45 30 22 18 14 12 10 8 7 7 6 41 26 19 15 11 9 8 7 6 5 4 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 497.77 933.23 2229.28 4898.92 % Lamp 4.1 7.8 18.6 40.8 % Fixture 5.9 11.0 26.3 57.7 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 2553.16 3121.65 3569.56 3585.75 8484.67 % Lamp 21.3 26.0 29.7 29.9 70.7 % Fixture 30.1 36.8 36.8 42.3 100.0 REPORT NUMBER: KPB165QLST Lamps: 165 W QL lamp with Standard Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 50 70 50 30 10 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 69 61 55 49 44 41 37 34 32 30 28 68 59 53 47 43 39 36 33 31 29 27 64 53 45 39 34 30 27 24 22 20 18 61 51 43 37 32 28 25 23 21 19 18 59 48 41 35 31 27 24 22 20 19 17 69 58 49 42 36 32 29 26 23 21 20 69 54 44 36 30 26 23 20 18 16 15 69 51 40 32 26 22 19 16 14 13 11 68 56 47 41 35 31 28 25 23 21 19 68 53 43 35 30 26 22 20 18 16 14 68 50 39 31 26 21 18 16 14 12 11 64 51 41 34 29 25 22 19 17 16 14 64 49 38 30 25 21 18 16 14 12 11 61 49 40 33 28 24 21 19 17 15 14 61 47 37 30 25 21 18 16 14 12 11 59 47 38 32 27 23 21 18 16 15 14 59 45 36 29 24 20 18 15 14 12 11 57 44 34 27 23 19 16 14 12 11 10 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 1239.06 2132.46 4335.62 6876.32 % Lamp 10.3 17.8 36.1 57.3 % Fixture 17.6 30.4 61.7 97.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 118.39 129.78 146.62 147.97 7024.28 % Lamp 1.0 1.1 1.2 1.2 58.5 % Fixture 1.7 1.8 1.8 2.1 100.0 1053 Lighting: Enclosed and Gasketed — Area — LED/Induction Lumens 57.43 158.04 282.31 435.46 580.50 715.54 829.63 904.70 935.31 924.84 870.28 70 Rw Lighting Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 80 Mercmaster™ III Induction Luminaire 165 W Photometric Data Enclosed and Gasketed. For Hazardous and Adverse Locations Total Luminaire Efficiency = 61.4% CIE Type – Direct Plane Spacing Criteria 0-180 1.80 90-270 1.44 Diagonal 1.54 REPORT NUMBER: KPB165QLAN Lamps: 165 W QL lamp with 30° Angle Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Enclosed and Gasketed — Area — LED/Induction Lighting % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lumens 163.07 462.54 734.69 975.82 1085.22 1057.29 951.20 800.34 592.90 347.00 139.87 32.59 120-130 130-140 140-150 150-160 160-170 170-180 12.93 8.39 3.34 1.19 0.88 0.20 Total Luminaire Efficiency = 61.6% CIE Type – Direct Plane Spacing Criteria 0-180 1.64 90-270 1.64 Diagonal 1.62 Lumens 216.27 655.22 1103.32 1536.15 1689.60 1298.60 664.63 201.70 26.23 0.27 0.00 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 1054 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 72 64 57 52 47 43 39 36 34 32 30 70 61 55 49 45 41 38 35 33 30 29 66 54 46 40 35 31 28 25 23 21 20 62 51 44 38 33 30 27 24 22 20 19 58 48 41 36 31 28 25 23 21 19 18 72 60 51 44 39 34 31 28 25 23 21 72 56 46 38 33 28 25 22 20 18 16 72 53 42 34 28 24 20 18 16 14 13 70 58 49 43 38 33 30 27 24 22 21 70 55 45 37 32 28 24 21 19 17 16 70 52 41 33 28 23 20 18 16 14 12 66 52 43 36 31 26 23 21 19 17 15 66 50 39 32 27 23 20 17 15 14 12 62 49 40 34 29 25 22 20 18 16 15 62 47 38 31 26 22 19 17 15 13 12 58 46 38 32 28 24 21 19 17 16 14 58 45 36 30 25 21 19 16 14 13 12 57 43 34 28 23 20 17 15 13 12 11 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 1360.30 2336.12 4478.63 6823.08 % Lamp 11.3 19.5 37.3 56.9 % Fixture 18.5 31.7 60.8 92.6 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 519.46 532.39 544.12 546.38 7369.46 % Lamp 4.3 4.4 4.5 4.6 61.4 % Fixture 7.0 7.2 7.2 7.4 100.0 REPORT NUMBER: KPB165QLHB Lamps: 165 W QL lamp with High Bay Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 80 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 73 68 62 57 52 48 44 41 38 35 33 72 66 61 55 51 47 43 40 37 34 32 68 61 54 48 43 38 34 31 28 26 24 66 59 52 46 41 37 33 30 28 25 23 63 57 50 45 40 36 32 29 27 25 23 73 65 58 51 45 40 36 33 30 27 25 73 63 54 46 40 35 31 27 24 22 20 73 61 51 42 36 31 27 24 21 19 17 72 64 56 50 44 40 36 32 29 27 25 72 62 53 46 39 35 30 27 24 22 20 72 60 50 42 36 31 27 24 21 19 17 68 60 51 44 39 34 30 27 24 22 20 68 58 49 41 35 30 27 23 21 19 17 66 58 50 43 38 33 29 26 24 21 19 66 56 48 41 35 30 26 23 21 18 17 63 56 48 42 37 33 29 26 23 21 19 63 55 47 40 34 30 26 23 20 18 17 62 53 45 39 33 29 25 22 19 17 15 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 1974.81 3510.96 6499.16 7391.72 % Lamp 16.5 29.3 54.2 61.6 % Fixture 26.7 47.5 87.9 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.27 0.27 0.27 0.27 7391.99 % Lamp 0.0 0.0 0.0 0.0 61.6 % Fixture 0.0 0.0 0.0 0.0 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaires Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Applications • Enclosed and gasketed fixtures suitable for use in marine and wet locations, and in a wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by the National Electrical Code as Class I, Division 2; Class II, Division 1 and 2; and Class III. The method of protection for the Zone 2 Mercmaster is AEx nA nR – Restricted Breathing/ Nonsparking. • For use in areas of low clearance, low ceiling heights or where fixture weights must be minimized. • Suited for use in non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust or corrosive atmospheres are present. • Typical applications include oil refineries, pulp and paper mills, chemical plants, food-processing areas, inspection facilities, foundries, power plants, storage areas, waste and sewage treatment, parking garages, and other areas where dust, water, dirt and rough usage are a problem. Features Ceiling Mount Fixture with Prismatic Glass Refractor Standard Materials • Standard dome or 30° angle reflectors: highly reflective fiberglass reinforced white polyester to provide strength, corrosion resistance and excellent photometrics • Fixture housing, mounting hoods, and guards: die-cast, copperfree (4/10 of 1% max.) aluminum with epoxy finish for corrosion resistance • Exposed hardware: stainless steel. Latch assemblies have stainless steel bolt and captive nut; reflectors and guards attach with stainless steel screws threading into stainless steel inserts • Globes and glass refractors: heat-resistant prismatic glass • Polymeric refractor: spun aluminum reflector and a lens made of an engineered thermoplastic Standard Finishes Options • Fuse can be field installed. Kits include fuse block, wire connectors and screws for attachment to mounting hood. — Fixtures with fuses do not comply with UL 1598A for marine listing — Canadian Electrical Code does NOT allow fusing in hazardous locations V • Guards with gray epoxy painted to match fixtures, supplied with stainless steel screws. Add suffix -G. • Reflectors are available as standard dome and 30° angle polyester. Order separately. Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844, UL 60079-0, UL 60079-15 • UL Listed: E10444 • CSA Standard: C22.2 No. 250, C22.2 No. 137, CAN E60079-0, CAN E60079-15 • CSA Certified: 025428 1055 Lighting: Enclosed and Gasketed — Area — Fluorescent • Epoxy powder coat finish electrostatically applied for complete, uniform surface protection V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting • Energy-efficient, compact fluorescent light sources possess superior lamp efficiency. • Fluorescent provides long lamp life, thereby reducing relamping costs. • “Instant on” nature of this electronically ballasted fluorescent eliminates the possibility of an extended blackout due to a momentary power dip. • High efficacies (up to 75 lumens per Watt) offer a desirable low-glare/instant-on alternative to low wattage HID sources. • High output under widely varying conditions: Greater than 90% of rated lumens in ambient temperatures from 23 °F to 130 °F / -5 °C to 54 °C. • Excellent color rendering (82 CRI) makes it the best choice for food processing and inspection facilities. • A wide variety of lamp wattages: 26 W, 32 W, 42 W, 52 W, 64 W, 84 W. • Electronic ballast permits low operating costs with power factor greater than 99%. Also allows flicker-free starting. • Cold weather starting to a minimum temperature of 0°F/ -18°C. • Fixtures are available for operation from an external 125 Vdc source. • Compact, light-weight low profile design creates ease of installation and maintenance. • Modular design, with multiple mounting hoods, optics and reflectors, permits a wide array of fixtures to meet installation and lighting needs. • Body gaskets and optic gaskets are high temperature silicone O-Rings that provide superior sealing. • Mounting hoods have a high hinge for added safety during installation and servicing. • Choice of heat-resistant prismatic glass refractor (NEMA I, III or V), heat-resistant clear globes, color globes or polymeric refractors (NEMA II, III, IV or V). (Polymeric refractors are not listed for Zone 2.) Pendant Mount Fixture with Glass Globe Mercmaster™ III Low Profile Compact Fluorescent Luminaires Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Illustrated Features Ballast Assembly Utilizing non-sparking components avoiding the ignition of gases or vapors that may be present (nA). Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Globe Chamber Completely sealed from the ballast housing and outside vapors/air (nA nR). Vented Reflectors Reflectors are thick, tough fiberglass- reinforced white polyester, vented for cooler operation. Quickly attach with furnished stainless steel screws. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Terminal Blocks (Zone 2) A seven-point terminal block is provided to facilitate wiring. Terminal block accommodates wire size ranging from #8 to #24 AWG. Photocell Installs through knock-out in mounting hoods except cone and ceiling mount. Provides continuous on-off dusk-to- dawn control. Not for use in hazardous (classified) areas. Hazardous location rated photocells also available. See Accessories page. Stainless Steel Inserts Ballast bodies have stainless steel threaded inserts to receive stainless steel screws for reflectors and guard. Prevents "freezing”, allowing guards and reflectors to be easily removed and replaced at any time, without damage to the housing. Hood/Ballast Gasket Silicone rubber gasket seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. Prismatic Glass Globes and Refractors Heat-resistant globes and glass refractors and polymeric refractors thread directly into ballast housing and seal against a high temperature silicone rubber gasket. (Polymeric refractors are not listed for Zone 2 areas.) Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. V CSA Certification Only. 1056 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Family Tree Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Mounting Hoods Mounting Hoods Pendant Pendant KPA-75 KPA-75 KPA-100 KPA-100 Pendant PendantCone Cone KPCH-75 KPCH-75 KPCH-100 KPCH-100 Ceiling Ceiling KPC-75 KPC-75 KPC-100 KPC-100 25° 25°Stanchion Stanchion 90°90°Stanchion Stanchion KPS-125 KPS-75 KPS-100 KPS-150 KPST-125 KPST-75 KPST-100 KPST-150 Globe or Polymeric Refractor Ballast Housings MLBG26FBU (26 W) Globe or Polymeric MLBG32FBU (32 W) Refractor MLBG42FBU (42 W) Ballast Housings MLBG52FBU (52 W) MLBG32F 32W) MLBG57FBU(26 (57&W) V MLBG64F (52(64 & 64W) MLBG64FBU W) MLBG84FBU (84 W) MLBG114FBU (114 W) V Ballast Housing Ballast Housing KPWB-75 KPWB-75 KPWB-100 KPWB-100 8” Glass Refractor Ballast Housings 8" Glass Refractor MLBR26FBU (26 W) Ballast Housings MLBR32FBU (32 W) MLBR26F(42 (26W) MLBR42FBU W) MLBR32F(52 (32W) MLBR52FBU W) MLBR52F (52W) MLBR57FBU (57W) V MLBR64FBU W) MLBR64F(64 (64W) MLBR84FBU (84 W) MLBR114FBU (114 W) V Polyester Reflectors Polyester Reflectors Polyester Reflectors Standard Standard Dome Dome CMR-4ST CMR-4ST 30° 30°Angle Angle CMR-4AN CMR-4AN 30°Angle Angle 30° KR2-AN KR2-AN Glass Refractors Glass Refractors NEMA I LPG-R1 NEMA NEMA III 1 LPG-R1 LPG-R3 NEMA NEMA V 3 LPG-R3 LPG-R5 NEMA 5 LPG-R5 Polymeric Refractors Polymeric Refractors NEMA II 2 LPRF-2CP LPRF-2CP NEMA NEMA III 3 LPRF-3CP LPRF-3CP NEMA NEMA IV 4 LPRF-4CP LPRF-4CP NEMA NEMA V 5 LPRF-5CP LPRF-5CP NEMA Aluminum Guard Guard Aluminum GlobeGuard Guard Globe KGU2 KGU2 Three-Way Three-Way Exit Sign Exit Sign CJEXR CJEXRN Aluminum Guard Aluminum Guard GlassRefractor Refractor Guard Glass Guard KRG2 KRG2 V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1057 Lighting: Enclosed and Gasketed — Area — Fluorescent Standard Dome Standard Dome KR2-ST KR2-ST Lighting Polyester Reflectors GlassGlobes Globes Glass Clear VPGL-2HR Clear VPGL-2HR Amber VPGL-2AM Amber VPGL-2AM Blue VPGL-2BL Blue VPGL-2BL Green VPGL-2GR Green VPGL-2GR Red VPGL-2RE Red VPGL-2RE Wall WallMount Mount Mercmaster™ III Low Profile Compact Fluorescent Luminaires Enclosed and Gasketed. For Hazardous and Wet Locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Fixtures Outside Type (Salt Water) Type 4X IP66 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For Zone 2 Mercmaster III Compact Fluorescent Luminaires ML Series: ML Mercmaster III Low Profile A F Lighting 2 G2 G BU L Z2 Guard Options: Lamp Options: Hub Size: 2 - 3/4” NPT G - Cast Guard L - Lamp(s) included 3 - 1” NPT (Glass Refractor Blank - Lamp(s) 4 - 1-1/4” NPT & Globe only) excluded Stanchion N - No Guard 5 - 1-1/2” NPT Stanchion Wattage: Voltage: Suffix: Optical Assembly: ➊ 26 - One 26 Watt PL-T BU - 120 to 277 V, DP - Safety Cable G2 - VPGL2HR Globe 32 - One 32 Watt PL-T 50/60 Hz SC - Safety Chain (not for 57, 114 Watt) 42 - One 42 Watt PL-T and 125 Vdc Z2 - Zone 2 Suffix G4 - VPGL4HR Globe 52 - Two 26 Watt PL-T A5 - 347 V, 60 Hz V (Required for (57, 114 Watt only) V 57 - One 57 Watt PL-T V J1 - NEMA I Glass Refractor AEx nA nR rating) 64 - Two 32 Watt PL-T B - Battery Back-up ➍V J3 - NEMA III Glass Refractor 84 - Two 42 Watt PL-T (42 W max.) J5 - NEMA V Glass Refractor 114 - Two 57 Watt PL-T V P2 - NEMA II Polymeric Refractor C - Safety Cable V F - Fused Mtg. Hood ➌V P3 - NEMA III Polymeric (Non-Haz. Loc. only) Refractor P - Non-Haz. Photocell P4 - NEMA IV Polymeric (Specify Voltage) V Refractor Q - Division 2 Haz. P5 - NEMA V Polymeric Photocell (Specify Refractor Voltage) V T - Terminal Blocks V V - Vibration Protection V X - Appledapter ➋ Mounting Hood Adapter V Z - Zone 2 suffix (required for Ex nR) V Lamp Type: F - Fluorescent Mounting Hood: A - Pendant (Rigid or Flexible) C - Ceiling D - Pendant Cone R - 90º Stanchion S - 25º Stanchion W - Wall Lighting: Enclosed and Gasketed — Area — Fluorescent 84 ➊ Polymeric refractors suitable for Class II, Groups F & G; NEMA 4X; and Marine Type Electric Fixture Outside Type (Salt Water) only. Reflectors ordered separately (for use with globe fixtures only): Standard Dome: KR2-ST 30-degree Angle: KR2-AN ➋ Appledapter is available for use with the pendant, ceiling and angled stanchion mounting only. ➌ Canadian Electrical Code does NOT allow fusing in hazardous locations V. ➍ Provides a minimum 90 minute back-up power supply in the case of a power loss. Will keep one lamp lit at approximately 50% of its full output (42 W maximum) V. V CSA Certification only. 1058 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Thermal Performance Class I, Division 2; Class II, Division 1; Simultaneous Exposure to Hazardous Conditions Temperature identification numbers of Mercmaster III Low Profile Fluorescent Fixtures Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Lamp Watts Ambient Temp (°F/°C) ➊ Globe 26 104/40 T3 Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Class I, Division 2 Globe & Glass Polymeric Reflector Refractor Refractor T3 T3 Class II, Division 1 Groups E, F and G ➋ Globe & Glass Polymeric Reflector Refractor Refractor Globe T5 — Fixtures Outside Type (Salt Water) Type 4X IP66 T5 T5 T6 Simultaneous Exposure (Class I, Div 2 and Class II, Division 1) Globe & Glass Polymeric Globe Reflector Refractor Refractor T3 T3 T3 — 32 104/40 T3 T3 T3 — T5 T5 T5 T6 T3 T3 T3 — 42 104/40 T3 T3 T3 — T5 T5 T5 T6 T3 T3 T3 — 52 104/40 T2D T2D T3 — T4A T4A T4A T6 T2C T2C T2C — 57 V 104/40 T2D T2D T3 — T4A T4A T4A T6 — — — — 64 104/40 T2D T2D T3 — T4A T4A T4A T6 T2C T2C T2C — 84 104/40 T2C T2C T2D — T3C T3C T3C T6 T2B T2B T2B — 114 V 104/40 T2C T2C T2D — T3C T3C T3C T6 — — — — “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number Temp. Range (˚ºF) Temp. Range (°C) T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 664842 351450 619662 326- 350 574617 301- 325 538572 281- 300 502536 261- 280 448500 231- 260 421446 216- 230 394419 201215 358392 181- 200 331356 166- 180 322329 161165 277320 136160 250275 121135 214248 101- 120 187212 86- 100 T6 185 85 Lighting Class I, Zone 2, AEx nA nR — Ex nR Globe & Reflector Refractor Supply Wire Temp. (°F/°C) Ambient Temp. (°F/°C) Globe 26 167/75 104/40 T5 T5 T6 32 167/75 104/40 T5 T5 T6 42 167/75 104/40 T5 T5 T6 52 167/75 104/40 T5 T5 T6 57 V 167/75 104/40 T6 T6 T6 64 167/75 104/40 T5 T5 T6 84 167/75 104/40 T5 T5 T6 114 V 167/75 104/40 T6 T6 T6 Lighting: Enclosed and Gasketed — Area — Fluorescent Lamp Watts “T” Numbers Represent the Maximum Surface Temperature for Luminaries with AEx nA nR Rating “T” Number T1 T2 T3 T4 T5 T6 Temperature Range (˚ºF) 574-842 394-572 277-392 214-275 187-212 185 Temperature Range (°C) 301-450 201-300 136-200 101-135 86-100 85 ➊ Use 167 °F/75 °C rated supply wire. ➋ Fixtures with Polymeric Refractor are listed for Groups F and G only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1059 Mercmaster™ III Low Profile Compact Fluorescent Luminaires Enclosed and Gasketed. For Hazardous and Wet Locations High Power Factor Electronic Ballast (Min. P.F. 99%), PL-T Lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Watts Hub Size (Inches) Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➋➌ With Globe ➊➍ With Type V 8” Glass Refractor ➊➍➎ With Type V Polymeric Refractor ➏ MLAF262G2N MLAF262J5N MLAF262P5N Pendant — One Hub (Rigid or Flexible Mounting) 1 x 26 W 1 x 32 W 1 x 42 W 2 x 26 W 1 x 57 W 2 x 32 W Shown with Glass Globe 2 x 42 W Lighting 2 x 57 W 1 MLAF263G2N MLAF263J5N MLAF263P5N 3/4 MLAF322G2N MLAF322J5N MLAF322P5N 1 MLAF323G2N MLAF323J5N MLAF323P5N 3/4 MLAF422G2N MLAF422J5N MLAF422P5N 1 MLAF423G2N MLAF423J5N MLAF423P5N 3/4 MLAF522G2N MLAF522J5N MLAF522P5N 1 3/4 1 3/4 MLAF523G2N MLAF523J5N MLAF523P5N MLAF572G4N V MLAF572J5N V MLAF572P5N V MLAF573G4N V MLAF572J5N V MLAF572P5N V MLAF642G2N MLAF642J5N MLAF642P5N 1 MLAF643G2N MLAF643J5N MLAF643P5N 3/4 MLAF842G2N MLAF842J5N MLAF842P5N MLAF843G2N MLAF843J5N MLAF843P5N 3/4 MLAF1142G4N V MLAF1142J5N V MLAF1142P5N V 1 MLAF1143G4N V MLAF1143J5N V MLAF1143P5N V 3/4 MLDF262G2N MLDF262J5N MLDF262P5N 1 MLDF263G2N MLDF263J5N MLDF263P5N 3/4 MLDF322G2N MLDF322J5N MLDF322P5N 1 MLDF323G2N MLDF323J5N MLDF323P5N 1 Pendant Cone — One Hub (Rigid or Flexible Mounting) 1 x 26 W 1 x 32 W Lighting: Enclosed and Gasketed — Area — Fluorescent 3/4 1 x 42 W 2 x 26 W 1 x 57 W 2 x 32 W Shown with 8” Glass Refractor 2 x 42 W 2 x 57 W 3/4 MLDF422G2N MLDF422J5N MLDF422P5N 1 MLDF423G2N MLDF423J5N MLDF423P5N 3/4 MLDF522G2N MLDF522J5N MLDF522P5N 1 MLDF523G2N MLDF523J5N MLDF523P5N 3/4 MLDF572G4N V MLDF572J5N V MLDF572P5N V 1 MLDF573G4N V MLDF573J5N V MLDF573P5N V 3/4 MLDF642G2N MLDF642J5N MLDF642P5N 1 MLDF643G2N MLDF643J5N MLDF643P5N 3/4 MLDF842G2N MLDF842J5N MLDF842P5N 1 MLDF843G2N MLDF843J5N MLDF843P5N 3/4 MLDF1142G4N V MLDF1142J5N V MLDF1142P5N V 1 MLDF1143G4N V MLDF1143J5N V MLDF1143P5N V ➊ For fixtures with guard, substitute G for N before adding voltage suffix. ➋ Add voltage suffix -BU for 120 through 277 V, 50/60 Hz and 125 Vdc. Add voltage suffix -A5 for 347 V, 60 Hz. ➌ Add L after voltage suffix to include lamp. ➍ Add Z2 suffix for factory-sealed non-sparking/restricted breathing protection (Aex nA nR). ➎ To order fixture with NEMA Type I or III glass refractor, change J5 to J1 or J3 respectively. ➏ To order fixture with NEMA Type II, III, or IV polymeric refractor, change P5 to P2, P3 or P4 respectively. Polymeric refractor fixtures are UL Listed and CSA Certified for Class II, Division 1 and 2, Groups F and G; Class III; Marine Outdoor Salt Water (UL1598A); NEMA 4X and CSA Type 4X. V CSA Certification only. 1060 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaires Enclosed and Gasketed. For Hazardous and Wet Locations High Power Factor Electronic Ballast (Min. P.F. 99%), PL-T Lamps. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Lamp Watts Fixtures Outside Type (Salt Water) Type 4X IP66 Catalog Numbers ➋➌ Hub Size (Inches) With Globe ➊➍ 3/4 MLCF262G2N With Type V 8” Glass Refractor ➊➍➎ With Type V Polymeric Refractor ➏ Ceiling — Five Hubs, Four Close-Up Plugs 1 x 26 W 1 x 32 W 1 x 42 W 2 x 26 W 1 x 57 W 2 x 32 W Shown with Polymeric Refractor 2 x 42 W 2 x 57 W MLCF262J5N MLCF262P5N 1 MLCF263G2N MLCF263J5N MLCF263P5N 3/4 MLCF322G2N MLCF322J5N MLCF322P5N 1 MLCF323G2N MLCF323J5N MLCF323P5N 3/4 MLCF422G2N MLCF422J5N MLCF422P5N 1 MLCF423G2N MLCF423J5N MLCF423P5N 3/4 MLCF522G2N MLCF522J5N MLCF522P5N 1 3/4 1 3/4 MLCF523G2N MLCF523J5N MLCF523P5N MLCF572G4N V MLCF572J5N V MLCF572P5N V MLCF573G4N V MLCF573J5N V MLCF573P5N V MLCF642G2N MLCF642J5N MLCF642P5N 1 MLCF643G2N MLCF643J5N MLCF643P5N 3/4 MLCF842G2N MLCF842J5N MLCF842P5N MLCF843J5N MLCF843P5N MLCF1142G4N V MLCF1142J5N V MLCF1142P5N V 1 MLCF1143G4N V MLCF1143J5N V MLCF1143P5N V 3/4 MLWF262G2N MLWF262J5N MLWF262P5N 1 MLWF263G2N MLWF263J5N MLWF263P5N 3/4 MLWF322G2N MLWF322J5N MLWF322P5N 1 Wall Bracket — Five Hubs, Four Close-Up Plugs 1 x 26 W 1 x 32 W 2 x 26 W 1 x 57 W 2 x 32 W Shown with 8” Glass Refractor 2 x 42 W 2 x 57 W MLWF323G2N MLWF323J5N MLWF323P5N MLWF422G2N MLWF422J5N MLWF422P5N 1 MLWF423G2N MLWF423J5N MLWF423P5N 3/4 MLWF522G2N MLWF522J5N MLWF522P5N 1 MLWF523G2N MLWF523J5N MLWF523P5N 3/4 MLWF572G4N V MLWF572J5N V MLWF572P5N V 1 MLWF573G4N V MLWF573J5N V MLWF573P5N V 3/4 MLWF642G2N MLWF642J5N MLWF642P5N 1 MLWF643G2N MLWF643J5N MLWF643P5N 3/4 MLWF842G2N MLWF842J5N MLWF842P5N 1 MLWF843G2N MLWF843J5N MLWF843P5N 3/4 MLWF1142G4N V MLWF1142J5N V MLWF1142P5N V 1 MLWF1143G4N V MLWF1143J5N V MLWF1143P5N V ➊ For fixtures with guard, substitute G for N before adding voltage suffix. ➋ Add voltage suffix -BU for 120 through 277 V, 50/60 Hz and 125 Vdc. Add voltage suffix -A5 for 347 V, 60 Hz. ➌ Add L after voltage suffix to include lamp. ➍ Add Z2 suffix for factory-sealed non-sparking/restricted breathing protection (Aex nA nR). ➎ To order fixture with NEMA Type I or III glass refractor, change J5 to J1 or J3 respectively. ➏ To order fixture with NEMA Type II, III, or IV polymeric refractor, change P5 to P2, P3 or P4 respectively. Polymeric refractor fixtures are UL Listed and CSA Certified for Class II, Division 1 and 2, Groups F and G; Class III; Marine Outdoor Salt Water (UL1598A); NEMA 4X and CSA Type 4X. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1061 Lighting: Enclosed and Gasketed — Area — Fluorescent 1 x 42 W 1 3/4 Lighting MLCF843G2N 3/4 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Accessories Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Description Fixtures Outside Type (Salt Water) Type 4X IP66 Hub Size (Inches) Catalog Number Pendant One Hub, Rigid or Flexible Mounting 3/4 KPA-75 1 KPA-100 Five Hubs, Four Close-Up Plugs 3/4 KPCH-75 1 KPCH-100 Five Hubs, Four Close-Up Plugs 3/4 KPC-75 1 KPC-100 Five Hubs, Four Close-Up Plugs 3/4 KPWB-75 1 KPWB-100 Pendant Cone Ceiling Lighting Wall 25° Stanchion One Hub 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 Lighting: Enclosed and Gasketed — Area — Fluorescent 90° Stanchion One Hub Ballast Bodies Catalog Numbers Lamp Wattage For Glass Globe or Polymeric Refractor ➊➋ For Glass Refractor ➋ 1 x 26 W MLBG26FBU MLBR26FBU 1 x 32 W MLBG32FBU MLBR32FBU 1 x 42 W MLBG42FBU MLBR42FBU 2 x 26 W MLBG52FBU — MLBR52FBU 1 x 57 W 2 x 32 W 2 x 42 W 2 x 57 W MLBG64FBU MLBG84FBU — MLBR64FBU MLBR84FBU Compact PL-T Fluorescent — 120 V to 277 V, 50/60 Hz and 125 Vdc Ballast Body for Glass Globe or Polymeric Refractor ➊ Ballast Body for Glass Refractor MLBR57F V MLBR114F V ➊ Polymeric refractor not listed for Class I, Zone 2 areas. ➋ Add voltage suffix -BU for 120 through 277 V, 50/60 Hz and 125 Vdc. Add voltage suffix -A5 for 347 V, 60 Hz. V CSA Certification only. 1062 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Accessories Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Item Description Catalog Number ➌ White Polyester Reflectors – Furnished with stainless steel screws For Globe Fixtures Standard Dome KR2-ST 30° Angle KR2-AN Standard Dome For Glass Refractor Fixtures ➊ Standard Dome CMR-4ST ➋ 30° Angle CMR-4AN ➋ 30° Angle Dome Prismatic Glass Globes — Heat-Resistant ➌ Clear VPGL-2HR Amber ➍ VPGL-2AM Blue ➍ VPGL-2BL Green ➍ VPGL-2GR Red ➍ VPGL-2RE Clear — 57/114 Watt V VPGL-4HR Lighting Closed Prismatic Glass Refractors — All Heat-Resistant ➌ NEMA Type I LPG-R1 NEMA Type III LPG-R3 NEMA Type V LPG-R5 NEMA Type II LPRF-2CP NEMA Type III LPRF-3CP NEMA Type IV LPRF-4CP NEMA Type V LPRF-5CP Globe Guard KGU2 Glass Refractor Guard KRG2 Globe Guard — 57/114 W V KPGU400 Lighting: Enclosed and Gasketed — Area — Fluorescent Closed Prismatic Polymeric Refractors — Not Listed for Class I, Zone 2 Areas Guards Globe Guard Glass Refractor Guard Globe Guard for 57 W Only ➊ Fixtures with refractors are not UL Listed when used with reflectors. ➋ Standard dome reflectors may interfere with bottom conduit entry if used with KPST and KPWB mounting hoods. ➌ Silicone or Teflon V coated globes are available. Contact your local sales representative. ➍ Non hazardous rated globes for special applications. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1063 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Accessories Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Item Description Catalog Number Replacement Optic Gaskets — Silicone rubber Globe and Polymeric Refractor Gasket VPGL-GK Glass Refractor Gasket KRF-GK Replacement Lamp Mercmaster III Low Profile Compact Fluorescent Lamp Type Lamp Base Wattage PL-T GX24q-3 26 Catalog Number PLT26 PL-T GX24q-3 32 PLT32 PL-T GX24q-4 42 PLT42 PL-T GX24q-5 57 PLT57 V Replacement Socket For 26 W, 32 W and 42 W PLT Lamps listed above PLT32RS For 57 W PLT Lamp PLT57RS V Epoxy enameled steel – 6”/152.4 mm high red lettering CJEXRN Lighting Three-Way Exit Sign ➊ Mounts to Globe Ballast Housing in place of guard. Lighting: Enclosed and Gasketed — Area — Fluorescent Single Sided Exit Sign ➊ Epoxy enameled steel – 6”/152.4 mm high red lettering AEXR-15R Mounts to Globe Ballast Housing in place of guard Retrofit Pendant Mounting Adapter Permits use of Mercmaster III pendant hood with 3/4” hub on existing V-51 mounting hood LPAD-1 Fuse Kit ➋ MLF2 2-Amp time delay fuse ➊ Consult your local sales representative for classified area suitability. Not listed for Zone 2 areas. ➋ Canadian Electrical Code does NOT allow fusing in hazardous locations V. V CSA Certification only. 1064 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Electrical Specifications Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nA nR IIC (Z2) Class I, Zone 2, Ex nR IIC (Z) V Class II, Division 1 and 2, Groups E, F, G Class III Simultaneous Exposure (Class I, Division 2/ Class II, Division 1) Line Voltage Fixtures Outside Type (Salt Water) Type 4X IP66 Total Watts Electronic Electronic Electronic .250 .110 .080 28 28 27 Electronic Electronic Electronic .300 .130 .150 36 36 36 Electronic Electronic Electronic .410 .180 .140 48 48 43 Electronic Electronic Electronic .460 .220 .170 56 56 54 Electronic Electronic Electronic .480 .210 .180 58 57 61 Electronic Electronic Electronic .580 .260 .190 69 69 66 Electronic Electronic Electronic .760 .320 .280 91 91 86 Electronic Electronic Electronic .960 .420 .360 116 114 122 Lighting: Enclosed and Gasketed — Area — Fluorescent Starting and Operating Amps Lighting Type of Ballast 26 Watt PL-T Fluorescent 120 277 347 32 Watt PL-T Fluorescent 120 277 347 42 Watt PL-T Fluorescent 120 277 347 52 Watt PL-T Fluorescent 120 277 347 57 Watt PL-T Fluorescent V 120 277 347 64 Watt PL-T Fluorescent 120 277 347 84 Watt PL-T Fluorescent 120 277 347 114 Watt PL-T Fluorescent V 120 277 347 Fuse catalog number: MLF2 (1 required for 120 V or 277 V) – 2-Amp fuse, time delay. Minimum starting temperature: 0 °F/-18 °C Energy Efficiency and Lamp Life Comparison Lamp Type Watts Lumens Lumen Output Comparison Rated Average Life (Hours) Incandescent 100 1750 750 Incandescent 150 2880 750 Incandescent 200 (PS-25, PS-30) 3710 750 Incandescent 200 (A-23) 4010 750 PL-T Fluorescent 26 1800 10,000 PL-T Fluorescent 32 2400 10,000 PL-T Fluorescent 42 3200 10,000 PL-T Fluorescent 52 3600 10,000 PL-T Fluorescent 57 V 4300 12,000 PL-T Fluorescent 64 4800 10,000 PL-T Fluorescent 84 6400 10,000 PL-T Fluorescent 114 V 8600 12,000 V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Light Output as Function of Temperature Relative Light Output % PL-T (Amalgam) Quad --Degrees F High lumen output of the amalgam technology lamp vs. the reduced light output at variable temperatures from a typical compact fluorescent lamp. 1065 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Dimensions Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Dimensions Pendant 12.06"/ 306.3 mm Pendant Cone 1.17"/ 29.7 mm Ceiling 25 Stanchion 13.62"/ 346.9 mm 12.06"/ 306.3 mm 12.06"/ 306.3 mm / 27” 15. .9 mm 387 5.59"/ 142.0 mm 0”/ 2.0 mm 8 50. 5”/ 9.2 0 mm 5. 23 1.75"/ 44.5 mm / 03” 12. .6 mm 305 Wall Mount 17.00"/ 431.8 mm t Se w re Sc 10.93”/ 277.6 mm 25° 12.03”/ 305.6 mm 9”/ 7.5 8 mm . 192 Polyester Reflector 17.23”/ 437.6 mm 5.90"/ 149.9 mm 9.79”/ 248.7 mm Globe or Polymeric Refractor Ballast Housing 8" Glass Refractor Ballast Housing 13.38"/ 339.9 mm 13.38"/ 339.9 mm 12.03”/ 305.6 mm Lighting 3.04"/ 77.2 mm 5.50"/ 139.7 mm 11.12"/ 282.4 mm 18.70"/ 475.0 mm 3.04"/ 77.2 mm 2.48"/ 63.0 mm 10.17"/ 258.3 mm "/ .06 m 17 .3 m 3 43 7.75"/ 196.9 mm 11.12"/ 282.4 mm Globe and Refractors 5.50"/ 139.7 mm Lighting: Enclosed and Gasketed — Area — Fluorescent 5.50"/ 139.7 mm 8.00"/ 203.2 mm 4.50"/ 114.3 mm Aluminum Guards 7.94"/ 201.6 mm 7.75"/ 196.9 mm 7.25"/ 184.2 mm 10.75"/ 237.1 mm 12.38"/ 314.5 mm 2.75"/ 69.9 mm 6.75"/ 171.5mm 11.00"/ 279.4 mm 8.50"/ 215.9 mm 5.88"/ 149.4 mm 7.50"/ 190.5 mm 8.88"/ 225.6 mm Accessory Weights ➊ Ballast Housings and Mounting Hoods Pendant Pendant Cone Ceiling Wall Mount 25° Stanchion 90° Stanchion Globe/Polymeric Refractor Housing Glass Refractor Housing Wt. Lbs/Kgs 2.25/1.0 2.50/1.1 3.00/1.4 4.00/1.8 3.25/1.5 3.75/1.7 5.60/2.5 6.50/2.9 Refractors, Globe, Guards and Reflectors 8” Glass Refractor Glass Globe Glass Globe — 57/114 W V Polymeric Refractor ➋ Glass Refractor Guard Globe Guard Globe Guard — 57/114 W V Standard Dome 30° Angle Exit Sign ➋ Wt. Lbs/Kgs 5.25/2.4 3.75/1.7 8.35/ 3.8 2.43/1.1 1.00/0.5 1.00/0.5 2.00/0.9 2.50/1.1 2.50/1.1 5.00/2.3 ➊ Weights are approximate. ➋ Not listed for Class I, Zone 2 areas. V CSA Certification only. 1066 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFDB™ Series Factory-Sealed Photocontrol Explosionproof, Dust-Ignitionproof For use with Threaded Metal Conduit. Explosionproof Remote Photocontrol – Single Gang Class I, Groups B, C, D Class II, Groups, E, F, G Class III Applications • Factory-sealed control stations confine arcing of device within the enclosure, preventing ignition of atmospheres. • Used in classified areas where flammable vapors, gases or highly combustible dusts are present. • For installation in chemical and petrochemical plants, refineries and other process industries, or where corrosive elements are present. Features Voltage Max Current (A) Max VA 1/2 120 8.3 1000 EFDB150PC120 EFDCB150PC120 3/4 120 8.3 1000 EFDB175PC120 EFDCB175PC120 1 120 8.3 1000 EFDB110PC120 EFDCB110PC120 Replacement Parts for Remote Photocontrol Catalog Number Complete Cover Photocontrol Assembly Only Voltage Current (A) Max VA 120 8.3 1000 EFKB-PC120 PC120X 208-277 3.5 1000 EFKB-PC277 PC277X EFDB Single Gang 5/16 Dia. (2) Mtg. Holes 12-24 x 1 (4) Screws A B 4.63”/ 117.6 mm Lighting • Finish is an epoxy powder coat for enhanced corrosion resistance. • Corrosion-resistant stainless steel hex-head captive screws hold cover to body. • Factory-sealed enclosure eliminates need for adding sealing fittings and compound at each conduit entrance (for Groups C & D applications). • Accurately tapped, tapered hubs for tight, rigid joints and ground continuity. • Smooth, rounded integral bushing in each hub protects conductor insulation. Catalog Number ➋ Dead End Feed Through Hub Size (Inches) 5.41”/ 137.4 mm Lighting: Enclosed and Gasketed — Area — Fluorescent C 2.31”/ 58.7 mm 3.00”/ 76.2 mm 4.81”/ 122.2 mm Dimensions in Inches B Hub Size (Inches) A 1/2 & 3/4 5.38 6.13 .78 1 5.50 6.31 .94 C Turn On 1 to 3 footcandles; Turn On/Turn Off ratio: 1:3, Temperature range: -30 °F through 140 °F. For Class I, Group B, external seals must be installed at each conduit entrance. For 208-277 volt rating, change 120 suffix to 277; current ratings become 3.5 A. ➋ Standard catalog number represents malleable iron body with aluminum cover. For aluminum body, add suffix -A. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1067 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Photometric Data Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 32 W compact fluorescent PL-T lamp (2,400 lumens). Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Zone Lumens 0-10 10.23 10-20 34.38 Total Luminaire Efficiency = 86.1% CIE Type – Semi-Direct Spacing Criteria Plane 20-30 64.27 30-40 105.64 0-180 2.80 40-50 151.34 90-270 2.68 50-60 194.61 Diagonal 2.50 60-70 224.08 70-80 243.06 80-90 248.58 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 241.28 220.55 182.81 109.74 33.74 1.67 0.14 0.00 0.00 Zone Lumens Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 Lumens % Lamp % Fixture 108.88 4.5 5.3 214.52 8.9 10.4 560.47 23.4 27.1 1276.18 53.2 61.8 644.64 26.9 31.2 754.38 31.4 36.5 789.80 32.9 36.5 789.94 32.9 38.2 2066.12 86.1 100.0 10-20 105.58 20-30 178.09 30-40 242.36 0-180 1.68 40-50 291.93 90-270 1.64 50-60 323.02 Diagonal 1.74 60-70 314.54 70-80 216.11 80-90 76.59 Zone Lumens CIE Type – Direct Spacing Criteria Plane Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 Lumens % Lamp % Fixture 318.12 13.3 17.8 560.48 23.4 31.4 1175.44 49.0 65.8 1782.68 74.3 99.8 3.72 0.2 0.2 3.72 0.2 0.2 3.72 0.2 0.2 3.72 0.2 0.2 1786.40 74.4 100.0 10-20 86.63 20-30 147.04 30-40 206.00 0-180 2.20 40-50 241.56 90-270 1.76 50-60 246.42 Diagonal 1.72 60-70 226.09 70-80 191.43 80-90 143.57 1068 80 70 50 30 10 0 0 95 95 95 95 89 89 89 89 77 77 77 67 67 67 58 58 58 53 1 81 75 70 65 75 70 65 61 60 56 53 51 48 45 43 40 38 34 2 3 4 5 6 7 8 9 10 72 64 58 53 48 45 41 38 36 63 53 46 41 36 32 29 26 24 55 45 38 32 28 24 21 19 17 49 38 31 26 22 18 16 14 12 66 59 53 49 44 41 38 35 33 58 49 43 38 33 30 27 24 22 51 42 35 30 26 22 20 18 16 46 36 29 24 20 17 15 13 11 50 42 36 32 28 25 23 21 19 44 36 30 26 22 19 17 15 14 40 31 25 21 17 15 13 11 10 42 35 30 27 24 21 19 18 16 37 30 25 21 19 16 14 13 12 34 26 21 17 15 12 11 9 8 34 29 25 22 19 18 16 15 13 31 25 21 18 15 13 12 11 10 28 22 17 14 12 10 9 8 7 24 18 14 11 9 8 7 6 5 REPORT NUMBER: MLF32ST Lamps: One 32 W lamp with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 0 89 89 89 89 86 86 86 86 83 83 83 79 79 79 76 76 76 74 1 79 75 71 67 77 73 69 66 70 67 64 66 64 62 64 62 60 58 2 3 4 5 6 7 8 9 10 70 63 57 52 48 44 41 38 36 63 54 47 41 37 33 30 27 25 57 47 40 34 29 26 23 21 19 52 41 34 28 24 21 18 16 14 68 61 55 50 46 43 40 37 35 62 53 46 40 36 32 29 27 25 56 46 39 33 29 26 23 20 18 51 41 34 28 24 21 18 16 14 59 50 44 39 35 31 28 26 24 54 45 38 33 28 25 22 20 18 50 40 33 28 24 21 18 16 14 56 48 42 37 33 30 27 25 23 52 43 37 32 28 24 22 20 18 49 39 33 27 23 20 18 16 14 54 46 40 36 32 29 26 24 22 51 42 36 31 27 24 21 19 18 48 39 32 27 23 20 18 16 14 46 37 30 25 21 19 16 14 13 Total Luminaire Efficiency = 68.5% 27.92 85.71 34.86 6.37 0.80 0.00 0.00 0.00 0.00 0.00 Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0-10 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 Coefficients of Utilization - Zonal Cavity Method Total Luminaire Efficiency = 74.4% 34.45 3.47 0.25 0.00 0.00 0.00 0.00 0.00 0.00 0.00 REPORT NUMBER: MLF32G Lamps: One 32 W lamp with Globe only * % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0-10 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 For candlepower values of fixtures with a 26 W PL-T lamp (1,800 lumens), multiply by 0.75. For candlepower values of fixtures with a 42 W PL-T lamp (3,200 lumens), multiply by 1.34. CIE Type – Direct Spacing Criteria Plane REPORT NUMBER: MLF32AN Lamps: One 32 W lamp with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 Lumens % Lamp % Fixture 261.58 10.9 15.9 467.59 19.5 28.4 955.56 39.8 58.1 1516.66 63.2 92.2 126.94 5.3 7.7 127.74 5.3 7.8 127.74 5.3 7.8 127.74 5.3 7.8 1644.40 68.5 100.0 0 80 80 80 80 78 78 78 78 73 73 73 69 69 69 65 65 65 63 1 71 66 62 59 68 64 60 57 60 57 54 56 54 52 53 51 49 47 2 3 4 5 6 7 8 9 10 63 57 51 47 43 40 37 34 32 56 48 42 37 33 30 27 25 22 50 42 35 30 26 23 21 18 17 45 36 30 25 21 19 16 14 13 61 54 49 45 41 38 35 33 31 54 47 41 36 32 29 26 24 22 49 41 34 30 26 23 20 18 16 44 36 29 25 21 18 16 14 13 51 44 38 34 30 27 25 23 21 46 39 33 28 25 22 19 17 16 43 34 28 24 20 18 16 14 12 48 41 36 32 29 26 23 22 20 44 37 31 27 24 21 19 17 15 41 33 27 23 20 17 15 14 12 45 39 34 30 27 24 22 20 19 42 35 30 26 23 20 18 16 15 39 32 26 22 19 17 15 13 12 37 30 25 21 18 15 13 12 10 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Low Profile Compact Fluorescent Luminaire Photometric Data Enclosed and Gasketed. For Hazardous and Wet Locations Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. * Photometric data is based on a fixture with a 32 W compact fluorescent PL-T lamp (2,400 lumens). Zone Lumens Total Luminaire Efficiency = 80.9% 0-10 18.85 10-20 63.99 20-30 125.20 30-40 205.98 0-180 2.24 40-50 294.73 90-270 2.64 50-60 370.74 Diagonal 2.74 60-70 425.25 70-80 457.39 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 463.07 445.19 402.45 328.71 203.51 69.29 8.05 0.13 0.00 0.00 Zone Lumens CIE Type – Semi-Direct Spacing Criteria Plane Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 Lumens % Lamp % Fixture 208.05 4.3 5.4 414.02 8.6 10.7 1079.50 22.5 27.8 2425.21 50.5 62.5 1176.35 24.5 30.3 1379.86 28.7 35.5 1457.21 30.4 35.5 1457.34 30.4 37.5 3882.55 80.9 100.0 193.68 20-30 332.52 30-40 456.54 0-180 1.62 40-50 551.40 90-270 1.66 50-60 602.56 Diagonal 1.84 60-70 573.69 70-80 386.39 CIE Type – Direct Spacing Criteria Plane 80 70 50 30 10 0 0 89 89 89 89 83 83 83 83 73 73 73 63 63 63 55 55 55 51 1 2 3 4 5 6 7 8 9 10 76 68 61 55 50 46 42 39 36 34 71 59 50 44 38 34 30 27 25 22 66 52 42 35 30 26 23 20 18 16 61 46 36 29 24 20 17 15 13 11 71 62 56 50 46 42 39 36 33 31 66 55 47 40 35 31 28 25 23 21 61 48 40 33 28 24 21 19 17 15 57 43 34 27 23 19 16 14 12 11 57 47 40 34 30 27 24 22 20 18 53 42 34 28 24 21 18 16 14 13 50 37 29 24 19 16 14 12 11 9 48 40 33 29 25 23 20 18 17 15 45 36 29 24 20 18 15 14 12 11 43 32 25 20 17 14 12 10 9 8 41 33 28 24 21 19 17 15 14 13 38 30 24 20 17 15 13 11 10 9 36 27 21 17 14 11 10 8 7 6 32 23 18 14 11 9 8 6 5 5 REPORT NUMBER: MLF64ST Lamps: Two 32 W lamps with Standard Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Lumens % Lamp % Fixture 589.15 12.3 17.9 1045.70 21.8 31.7 2199.66 45.8 66.7 3293.22 68.6 99.9 2.39 0.0 0.1 2.39 0.0 0.1 2.39 0.0 0.1 2.39 0.0 0.1 3295.61 68.7 100.0 0 82 82 82 82 80 80 80 80 76 76 76 73 73 73 70 70 70 69 1 2 3 4 5 6 7 8 9 10 73 65 59 53 48 44 41 38 35 33 69 58 50 44 38 34 31 28 25 23 65 53 44 37 31 27 24 21 19 17 62 48 38 31 26 22 19 17 15 13 71 63 57 51 47 43 40 37 34 32 67 57 49 43 38 33 30 27 25 23 64 52 43 36 31 27 24 21 19 17 61 48 38 31 26 22 19 17 15 13 64 55 47 41 36 32 29 26 24 22 62 50 42 35 30 26 23 21 19 17 59 46 37 31 26 22 19 17 15 13 62 52 45 39 35 31 28 25 23 21 59 49 40 34 29 26 23 20 18 17 57 45 37 30 25 22 19 17 15 13 59 50 43 38 33 30 27 24 22 21 57 47 39 33 29 25 22 20 18 16 56 44 36 30 25 22 19 16 15 13 54 43 34 28 24 20 17 15 13 12 Total Luminaire Efficiency = 62.8% 50.16 10-20 156.40 20-30 272.40 30-40 383.54 0-180 2.16 40-50 446.01 90-270 1.70 50-60 442.26 Diagonal 1.80 60-70 405.74 70-80 352.81 CIE Type – Direct Spacing Criteria Plane REPORT NUMBER: MLF64AN Lamps: Two 32 W lamps with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 Lumens % Lamp % Fixture 478.96 10.0 15.9 862.50 18.0 28.6 1750.77 36.5 58.1 2778.65 37.9 92.2 234.15 4.9 7.8 235.69 4.9 7.8 235.69 4.9 7.8 235.69 4.9 7.8 3014.34 62.8 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 0 74 74 74 74 71 71 71 71 67 67 67 63 63 63 60 60 60 58 1 2 3 4 5 6 7 8 9 10 65 58 52 47 43 40 36 34 31 29 61 51 44 39 34 30 27 25 22 21 57 46 38 32 28 24 21 19 17 15 54 42 33 27 23 20 17 15 13 12 62 55 50 45 41 38 35 32 30 28 59 50 43 37 33 29 26 24 22 20 55 45 37 31 27 24 21 19 17 15 52 41 33 27 23 19 17 15 13 12 55 46 40 35 31 28 25 23 21 19 52 42 35 30 26 23 20 18 16 15 50 39 31 26 22 19 16 14 13 11 52 44 38 33 29 26 24 22 20 18 49 40 34 29 25 22 19 17 15 14 47 37 30 25 21 18 16 14 12 11 48 41 35 31 27 25 22 20 19 17 47 38 32 27 24 21 18 16 15 14 45 36 29 24 21 18 15 14 12 11 43 34 27 22 19 16 14 12 11 10 1069 Lighting: Enclosed and Gasketed — Area — Fluorescent Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 0-10 80-90 269.34 90-100 159.49 100-110 63.13 110-120 11.54 120-130 1.54 130-140 0.00 140-150 0.00 150-160 0.00 160-170 0.00 170-180 0.00 Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting 10-20 Lumens Coefficients of Utilization - Zonal Cavity Method Total Luminaire Efficiency = 68.7% 62.95 Zone REPORT NUMBER: MLF64G Lamps: Two 32 W lamps with Globe only * % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0-10 80-90 133.48 90-100 2.39 100-110 0.00 110-120 0.00 120-130 0.00 130-140 0.00 140-150 0.00 150-160 0.00 160-170 0.00 170-180 0.00 For candlepower values of fixtures with a 26 W PL-T lamp (1,800 lumens), multiply by 0.75. For candlepower values of fixtures with a 42 W PL-T lamp (3,200 lumens), multiply by 1.34. FV™ Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Group IIC Class II Division 1, Groups E, F, G Class II, Division 2, Groups F, G Marine Type Electric Fixture Outside Type (Salt Water) * Type 4X Wet Locations Applications • For use in hazardous locations defined by the NEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A; Type 4X; and Class I, Zone 2 II C. • For use in locations where a high degree of corrosion resistance is required. • For indoor or outdoor use where protection against dirt, water and moisture is necessary. • Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food processing plants, warehouses, underground tunnels and general manufacturing facilities. Lighting Features • Stainless steel hubs (3/4”) provided as standard. • Ballast options for nearly all U.S. and foreign voltage and frequency combinations are available. • Low operating costs provide more lumens per Watt than incandescent fixtures. • Impact-resistant polycarbonate lens is hinged to allow easy access to lamp compartment. • Corrosion-resistant fiberglass reinforced polyester housing. • Actuator allows access to lamps and ballast compartment – no tools required. • Latch assembly and elastomer type gasket provide positive seal from water ingress. • Safety switch (supplied as standard) disconnects power to lamps and ballast when lens is open. • Reflector is hinged for easy single-handed entry to ballast compartment. • Actuator can be removed for tamper-resistant applications. Compliancies and Certifications • UL Standard: UL 1598, UL 844, UL 60079-0, UL 60079-15 • UL Listed: E10794 • CSA Standard: C22.2 No. 250, C22. 2 No. 137, CAN E60079-0, CAN E60079-15 • cUL Listed: E10794 Lighting: Enclosed and Gasketed — Area — Fluorescent Standard Materials • • • • • • • • Housing: fiberglass reinforced polyester Lens: polycarbonate Gasket: elastomer Hubs: stainless steel Lampholders: polycarbonate Internal reflector: highly reflective white polycarbonate Fixed surface mount: (2) 14-gauge stainless steel Adjustable wall mount: (2) copperfree (4/10 of 1% max.) aluminum • 45° fixed wall mount: (2) 11-gauge (1/8”) stainless steel • Chain ring bolt: set of 2 zinc plated steel (internal diameter .78”) Options • • • • Individually fused ballast. Add suffix -F. Terminal block. Add suffix -T. Emergency battery pack. Add suffix -EL. Emergency light capability in moments of power interruption. Luminaire automatically switches to emergency mode, keeping one lamp illuminated for a minimum of 90 minutes. When AC power is restored, battery automatically recharges in 24 hours. Initial light output is 600-700 lumens. * Does not apply to fixtures with fusing. 1070 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FV™ Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Group IIC Class II Division 1, Groups E, F, G Class II, Division 2, Groups F, G Marine Type Electric Fixture Outside Type (Salt Water) * Type 4X Wet Locations Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For FV Series Nonmetallic Fluorescent Luminaires FV Series: FV - FV Series P 2 32 Number of Lamps: 2 - 2 Lamps 3 - 3 Lamps (32 W only) 4 - 4 Lamps (40 W only, F40BX) Lamp Type: P - "PL" Fluorescent (F40BX) R - Rapid Start H - High Output BU SO Voltage ①: 347 - 347 V 60 Hz V BU - 120-277 V 50/60 Hz ③ Wattage: 32 - 32 W (T8) 40 - 40 W (T12-RS, F40BX) 44 - 44 W (T-8-HO) 60 - 60 W (T-12-HO) F Options: F - Fuse T - Terminal Block (6 Point) EL - Emergency Battery Pack ② Ballast Type: SS - Solid State (for 347 V T-12) Lamp Type Hub Size (Inches) Overall Fixture Length (Inches/Millimeters) Volts 2 40 F40BX 3/4 31/787.4 120-277 2 40 F40BX 3/4 31/787.4 347 4 40 F40BX 3/4 55/1397 120-277 4 40 F40BX 3/4 55/1397 347 2 32 T8 3/4 55/1397 120-277 2 32 T8 3/4 55/1397 347 2 44 T8-HO 3/4 55/1397 120-277 2 44 T8-HO 3/4 55/1397 347 2 40 T12 3/4 55/1397 120-277 2 40 T12 3/4 55/1397 347 2 60 T12-HO 3/4 55/1397 120-277 2 60 T12-HO 3/4 55/1397 347 3 32 T8 3/4 55/1397 120-277 3 32 T8 3/4 55/1397 347 Catalog Number ⑦ FVP240BU FVP240-347 V FVP440BU FVP440-347 V FVR232BU FVR232-347S0 V FVH244BU FVH244-347S0 V FVR240BU FVR240-347SS V FVH260BU FVH260-347SS V FVR332BU FVR332-347S0 V Note: BU ballasts are auto-sensing, solid state for any voltage between 120 and 277 V, 50 or 60 Hz. * Does not apply to fixtures with fusing. ① Consult factory for availability of specific voltages. ② 4’ fixture only. ③ 32 W SS Octron and F40BX only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1071 Lighting: Enclosed and Gasketed — Area — Fluorescent Lamp Watts Lighting Number of Lamps ⑥ FV™ Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Group IIC Class II Division 1, Groups E, F, G Class II, Division 2, Groups F, G Marine Type Electric Fixture Outside Type (Salt Water) * Type 4X Wet Locations Description Catalog Number Standard Materials 14-gauge stainless steel FVSM Adjustable Wall Mount (set of 2) Copperfree (4/10 of 1% max.) aluminum FVWAM Fixed 45°˚ Wall Mount (set of 2) 11-gauge (1/8”) stainless steel FVWFM Chain Mount (set of 2) Zinc plated steel M8 ring bolts (chain not provided) FVCM Lighting Surface Mount (set of 2) Technical Data — Thermal Performance of FV Series Fixtures For supply connection, use wire rated 167 °F/75 °C. Lighting: Enclosed and Gasketed — Area — Fluorescent Lamp Min. Start Temp ˚ (°C/°˚F) Ambient Temp. (°C/°˚F) “T” Numbers Quantity Watt Type Lamp Lumens FVP240BU 2 40 F40BX 3300 -18/0 55/131 T4 FVP240-347 V 2 40 F40BX 3300 -18/0 55/131 T4 FVP440BU 4 40 F40BX 3300 -18/0 55/131 T4 FVP440-347 V 4 40 F40BX 3300 -18/0 55/131 T4 FVR232BU 2 32 T8-RS 2850 -18/0 40/104 T6 FVR232-347S0 2 32 T8-RS 2850 -18/0 40/104 T6 FVH244-BU 2 44 T8-HO 4050 -10/14 40/104 T6 FVH244-347S0 V 2 44 T8-HO 4050 -10/14 40/104 T6 FVR240BU 2 40 T12-RS 3050 10/50 40/104 T5 FVR240-347SS V 2 40 T12-HO 3050 10/50 40/104 T5 FVH260BU 2 60 T12-HO 4050 -28/-20 40/104 T4A FVH260-347SS V 2 60 T12-HO 4050 -28/-20 40/104 T4A FVR332BU 3 32 T8-RS 2850 -18/0 40/104 T6 Fixture * Does not apply to fixtures with fusing. V CSA Certification only. 1072 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FV™ Series Nonmetallic Fluorescent Luminaire Dimensions For Hazardous and Adverse Locations Dimensions FV Series A 0.6"/ 15.24 mm 5.7"/ 144.8 mm 8.6"/ 218.4 mm B FVWFM FVWAM FVSM FVCM Ø 0.31"/ 8.0 mm Ø 0.78"/ 19.8 mm 9.25”/ 235.0 mm 0.31"/ 7.87 mm 60° MAX. 0.20"/ 5.08 mm 1.25"/ 31.8 mm 0.20"/ 5.08 mm 4.00”/ 101.6 mm 3.56"/ 90.4 mm 7.72"/ 196.1 mm 0.31"/ 7.87 mm 0.38”/ 9.5 mm Lighting: Enclosed and Gasketed — Area — Fluorescent 0.31"/ 7.9 mm Dia. 0.31"/ 7.87 mm 25 1.0 .4 0" m / m 7.64"/ 194.1 mm Ø 0.31"/8.0 mm Lighting 7.5”/ 190.5 mm 9.5"/ 241.3 mm 0.59"/ 15.0 mm 10 4. 4. 13 9 "/ m m 9.21”/ 233.9 mm 60 2.3 .5 8" m / m 8 20 . 2 9. 5 6 "/ m m 24 9. 1. 50 3 "/ m m 23 0.9 .9 4" m / m 0.70"/ 17.78 mm 0.25"/ 6.3 mm Dia. Mounting Centers and Overall Length A B 2 FT./0.6 M 15.80”/401.3 mm 31.00”/787.4 mm 4 FT./1.2 M 27.60"/701.0 mm 55.00”/1397.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1073 FV™ Series Nonmetallic Fluorescent Luminaire Photometric Data For Hazardous and Adverse Locations Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting CIE TYPE – DIRECT PLANE: 0 DEG. 90 DEG. SPACING CRITERIA: 1.2 1.5 CANDELA DISTRIBUTION 0 5 15 25 35 45 55 65 75 85 90 0.0 3152 3139 3030 2798 2470 2043 1523 941 378 49 10 45.0 3152 3138 3060 2910 2740 2517 2130 1656 1234 679 474 ZONAL 90.0 LUMENS 3152 3130 299 3036 868 3041 1351 2091 1720 2760 1897 2373 1827 1976 1553 1532 1163 901 649 694 CIE TYPE – DIRECT PLANE: 0 DEG. 90 DEG. SPACING CRITERIA: 1.2 1.5 CANDELA DISTRIBUTION 0 5 15 25 35 45 55 65 75 85 90 0.0 1101 1098 1056 976 856 710 528 328 132 14 4 45.0 1101 1098 1069 1026 985 928 830 681 567 340 252 ZONAL 90.0 LUMENS 1101 1097 104 1085 303 1093 477 1096 616 1075 703 986 709 849 636 757 530 499 332 397 CIE TYPE – DIRECT PLANE: 0 DEG. 90 DEG. SPACING CRITERIA: 1.2 1.4 CANDELA DISTRIBUTION 0 5 15 25 35 45 55 65 75 85 90 0.0 1780 1767 1700 1574 1388 1150 860 53 214 21 7 1074 45.0 1780 1773 1732 1661 1554 1388 12001 6949 698 443 319 ZONAL 90.0 LUMENS 1780 169 1771 169 1757 490 1734 767 1652 1064 1556 1064 3671 038 1116 881 914 675 637 426 491 50 .95 .80 .69 .60 .53 .47 .43 .39 .36 .33 .30 10 30 .95 .78 .65 .55 .48 .42 .37 .33 .30 .27 .24 10 .95 .75 .61 .51 .43 .37 .32 .28 .25 .23 .20 FVP 440, Four 40 W PL Lamps • Total Luminaire Efficiency = 85.8% % Floors Rfc 20 % Ceiling Rcc 80 70 50 30 % Walls Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 0 1.02 1.02 1.02 1.02 1.00 1.00 1.00 1.00 .95 .95 .95 .91 .91 .91 1 .99 .93 .89 .84 .96 .91 .87 .83 .87 .83 .80 .83 .80 .78 2 .89 .80 .73 .67 .86 .78 .72 .66 .75 .69 .64 .72 .67 .63 3 .74 .64 .56 .50 .72 .63 .56 .50 .60 .54 .49 .58 .52 .48 4 .68 .56 .48 .42 .66 .55 .48 .42 .53 .46 .41 .51 .45 .40 5 .62 .50 .42 .36 .60 .49 .41 .35 .47 .40 .35 .46 .39 .35 6 .57 .45 .37 .31 .55 .44 .36 .31 .42 .36 .30 .41 .35 .30 7 .53 .41 .33 .27 .51 .40 .32 .27 .38 .32 .27 .37 .31 .26 8 .49 .37 .29 .24 .48 .36 .29 .24 .35 .28 .24 .34 .28 .24 9 .46 .34 .26 .21 .45 .33 .26 .21 .32 .26 .21 .31 .25 .21 10 .43 .31 .24 .19 .42 .31 .24 .19 .30 .23 .19 .29 .23 .19 50 .88 .80 .69 .55 .49 .44 .40 .36 .33 .30 .28 10 30 .88 .78 .65 .51 .44 .39 .34 .30 .27 .25 .23 0 10 0 .88 .86 .75 .73 .61 .59 .47 .45 .40 .38 .44 .32 .30 .28 .26 .24 .23 .22 .21 .19 .19 1.75 70 .92 .81 .73 .65 .60 .55 .50 .47 .43 .40 .38 FVR 232, Two T8 32 W Lamps* • Total Luminaire Efficiency = 77.4% 20 80 70 50 30 50 30 10 70 50 30 10 50 30 10 50 30 10 .92 .92 .92 .90 .90 .90 .90 .86 .86 .86 .82 .82 .82 .77 .72 .68 .79 .75 .71 .67 .71 .68 .65 .68 .66 .63 .65 .59 .53 .71 .64 .58 .53 .61 .56 .51 .58 .54 .50 .56 .49 .44 .63 .55 .49 .43 .53 .47 .43 .51 .46 .42 .49 .42 .36 .58 .48 .41 .35 .46 .40 .35 .44 .39 .34 .44 .37 .31 .53 .43 .36 .31 .41 .35 .31 .40 .34 .30 .39 .31 .26 .49 .38 .31 .26 .35 .30 .26 .35 .30 .25 .35 .28 .23 .45 .35 .28 .23 .33 .27 .22 .32 .26 .22 .32 .25 .20 .42 .31 .25 .20 .30 .24 .20 .29 .24 .20 .29 .22 .18 .39 .29 .22 .18 .28 .22 .18 .27 .21 .18 .27 .20 .16 .37 .26 .20 .16 .26 .20 .16 .25 .20 .16 50 .79 .65 .56 .49 .42 .38 .34 .31 .28 .26 .24 10 30 .79 .63 .52 .45 .38 .34 .29 .26 .23 .21 .19 10 .79 .61 .49 .41 .34 .30 .25 .22 .19 .17 .16 0 0 .77 .59 .47 .39 .32 .28 .23 .20 .18 .16 .14 70 .90 .80 .72 .65 .60 .55 .50 .46 .43 .40 .38 FVR 332, Three T8 32 W Lamps • Total Luminaire Efficiency = 75.7% 20 80 70 50 30 50 30 10 70 50 30 10 50 30 10 50 30 10 .90 .90 .90 .88 .88 .88 .88 .84 .84 .84 .81 .81 .81 .76 .72 .68 .78 .74 .70 .67 .71 .68 .65 .68 .65 .63 .65 .59 .54 .70 .63 .58 .53 .61 .56 .52 .58 .54 .51 .56 .49 .44 .63 .55 .49 .43 .53 .47 .43 .51 .46 .42 .50 .42 .37 .58 .48 .42 .36 .47 .41 .36 .45 .39 .35 .44 .37 .31 .53 .43 .36 .31 .41 .35 .31 .40 .34 .30 .39 .32 .27 .49 .39 .32 .27 .37 .31 .27 .36 .30 .26 .36 .29 .24 .45 .35 .28 .23 .34 .28 .23 .33 .27 .23 .32 .26 .21 .42 .32 .25 .21 .31 .25 .21 .30 .24 .21 .30 .23 .19 .39 .29 .23 .19 .28 .23 .19 .27 .22 .18 .27 .21 .17 .37 .27 .21 .17 .26 .21 .17 .25 .20 .17 50 .77 .65 .56 .49 .43 .38 .35 .32 .29 .27 .25 10 30 .77 .63 .52 .45 .38 .34 .30 .27 .24 .22 .20 10 .77 .61 .50 .41 .35 .30 .26 .23 .20 .18 .17 0 0 .76 .59 .48 .39 .33 .28 .24 .21 .19 .17 .15 Room Cavity Ratio ZONAL 90.0 LUMENS 1705 1687 161 1688 468 1660 731 1623 932 1516 1027 1292 992 1065 836 821 619 497 351 399 Room Cavity Ratio 45.0 1705 1698 1642 1581 1492 1361 1161 888 644 360 257 • Total Luminaire Efficiency = 92.7% 20 50 30 10 50 30 10 50 30 10 1.08 1.03 1.03 1.03 .99 .99 .99 .83 .87 .83 .80 .83 .80 .78 .66 .75 .69 .64 .72 .67 .63 .54 .65 .58 .53 .62 .57 .52 .44 .57 .50 .44 .55 .49 .44 .38 .51 .44 .38 .49 .43 .37 .33 .46 .38 .33 .44 .38 .33 .29 .42 .34 .29 .40 .34 .29 .26 38 .31 .25 .37 .30 .25 .23 .35 .28 .23 .34 .27 .23 .21 .32 .25 .21 .31 .25 .21 % Floors Rfc % Ceiling Rcc % Walls Rw 0 1 2 3 4 5 6 7 8 9 10 Room Cavity Ratio 0 5 15 25 35 45 55 65 75 85 90 0.0 1705 1701 1635 1513 1324 1085 806 490 197 32 12 FVP 240, Two 40 W PL Lamps % Floors Rfc % Ceiling Rcc 80 70 % Walls Rw 70 50 30 10 70 50 30 0 1.10 1.10 1.10 1.10 1.08 1.08 1.08 1 .99 .93 .89 .84 .96 .91 .87 2 .89 .80 .73 .67 .86 .78 .72 3 .80 .69 .61 .54 .78 .68 .60 4 .73 .61 .52 .45 .71 .60 .51 5 .67 .54 .45 .39 .65 .53 .45 6 .62 .49 .40 .33 .60 .48 .39 7 .57 .44 .35 .29 .55 .43 .35 8 .53 .40 .32 .26 .52 .39 .31 9 .50 .37 .29 .23 .48 .36 .28 10 .46 .34 .26 .21 .45 .33 .26 % Floors Rfc % Ceiling Rcc % Walls Rw 0 1 2 3 4 5 6 7 8 9 10 Room Cavity Ratio CIE TYPE – DIRECT PLANE: 0 DEG. 90 DEG. SPACING CRITERIA: 1.2 1.5 CANDELA DISTRIBUTION 0 0 .93 .73 .59 .49 .41 .35 .30 .26 .23 .21 .19 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires Nonmetallic Fluorescent 4 foot, 2 lamp fixtures. High-impact fiberglass reinforced polyester fixtures suitable for use in wet and damp locations. FR Series Wet Locations IP65 when used with optional polycarbonate lens FZ Series Class I, Division 2, Groups A, B, C, D Class I, Zone 2, IIC AEx nA IIC T5 IP65 Ex nA IIC T5 IP65 FD Series Class I, Division 2, Groups A, B, C, D Class I, Zone 2, IIC Applications • For use in locations where a high degree of corrosion resistance is required. • FR Series: — For use in areas where high humidity or water vapor are present — Typical uses include meat- or food-processing plants, dairy or drug plants, breweries, kitchens, chemical plants, car washes, laundries and parking garages. — Can be used indoors or outdoors in protected locations (wet locations). — Operates safely in 100 °F/38 °C ambient temperature areas. • FZ and FD Series: — For use in hazardous locations defined by the NEC as Class I, Division 2; and Class I, Zone 2. — For wet-location use where protection against dirt, water and moisture is necessary. — Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food-processing plants, warehouses, underground tunnels and general manufacturing facilities. • FZ Series is UL Listed for Class I, Division 2 and Zone 2. • FD Series fixture is UL listed for Class I, Division 2. Features • Housing: fiberglass reinforced polyester • Lens: polycarbonate or acrylic. (Fixture has IP65 rating with polycarbonate lens.) Acrylic lens supplied as standard • Latches: celcon • Ceiling mounting bracket: stainless steel • Adjustable wall mount: copperfree (4/10 of 1% max.) aluminum • Fixed wall mount: stainless steel Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 • • • • Chain mount: zinc plated steel Gasket: non-thixotropic polyol Hubs: zinc plated steel with neoprene o-ring Lampholders: polycarbonate Standard Finishes • Housing: white color finish • Celcon latches: white color finish • Adjustable wall mount: epoxy powder coat Options: • • • • F - Fused T - Terminal Blocks P - Polycarbonate Lens for IP65 Rating E - Emergency Battery Pack capability in moments of power interruption. Luminiare automatically switches to emergency mode, keeping one lamp illuminated for a minimum of 90 minutes. When AC power is restored, battery automatically recharges in 24 hours. Initial light output is 600-700 lumens. Compliancies and Certifications • • • FR Series: — UL Standard: UL 1598 — UL Listed: E187946 — CSA Standard: C22.2 No. 250 — cUL Listed: E187946 FZ Series: — UL Standard: UL 1598, UL 844, UL 60079-0, UL 60079-15 — UL Listed: E10794 — CSA Standard: C22.2 No. 250, C22.2 No. 137, CAN E60079-0, CAN E60079-15 — cUL Listed: E10794 FD Series: — UL Standard: UL 1598, UL 844 — UL Listed: E10794 — CSA Standard: C22.2 No. 250, C22.2 No. 137 — cUL Listed: E10794 1075 Lighting: Enclosed and Gasketed — Area — Fluorescent Standard Materials Non-thixotropic polyol gasket is bonded to housing. With plastic latches closed, it forms a continuous, tight seal with lens. Keeps out moisture, vapor and dirt. Allows fast, easy fixture washing. Lighting • Fixtures are available with ballasts to support T12 and T8 lamps for nearly all U.S. and foreign voltage and frequency combinations. • Low operating costs provide more lumens per Watt than incandescent fixtures. • Housing is smooth, seamless, one-piece injection molded. • Lens comes in high-impact polycarbonate plastic or impactresistant acrylic. • Fixtures are washable, non-conductive and corrosion-resistant. • Enclosure is rated at IP65 (using polycarbonate lens), dust-proof and protected against water spray. • A compressible, one-piece, non-thixotropic polyol gasket is bonded to the housing around the entire perimeter. It forms a continuous tight seal with the lens to keep out dirt, vapor and moisture. • Lens is securely clamped to fixture using six captive corrosion-proof molded celcon tension latches. Lens is impact-resistant acrylic to protect lamps against breakage, and protect work area from broken lamp glass. • Electrical components are mounted on a metallic wireway. Reflector is supported by internal safety springs to simplify installation and servicing. • Optional fusing protects circuitry against occasional line voltage spikes. • FR Series fixtures are available with one or two watertight 1/2” hubs for electrical-feed mounting or single-entry mounting. • FZ fixtures are available with either 1/2” NPT or cable gland entries. — Cable glands are not available with FD series. Illustrated Features FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires Nonmetallic Fluorescent 4 foot, 2 lamp fixtures. High-impact fiberglass reinforced polyester fixtures suitable for use in wet and damp locations. FR Series Wet Locations IP65 when used with optional polycarbonate lens FZ Series Class I, Division 2, Groups A, B, C, D Class I, Zone 2, IIC AEx nA IIC T5 IP65 Ex nA IIC T5 IP65 FD Series Class I, Division 2, Groups A, B, C, D Class I, Zone 2, IIC Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For FR, FZ And FD Nonmetallic Fluorescent Lighting Fixtures FZ N1 C 2 Conduit/Cable Entry: N1 - 1/2” NPT Conduit Single Entry M1 - Cable Gland Single Entry ⑤⑦ N2 - 1/2” NPT Conduit (2 hubs provided) M2 - Cable Gland Feed Thru ⑥⑦ Lighting 08 Number of Lamps: 2 - 2 Lamps Series: FR - Wet Location FZ - Zone 2, AEx nA, Ex nA FD - Class I, Division 2 ① Lighting: Enclosed and Gasketed — Area — Fluorescent 4 Mounting Configuration: C - Ceiling P - Pendant S 126 Ballast Type: S - Solid State ② Lamp Length: 4 - 4 Feet 2 F Number of Ballasts: Blank - Single 2 - Double Voltage: 347 - 347 V, 60 Hz V BU - 120-277 V, 50/60 Hz (0 °F/-18 °C start) Lamp Type: 08 - T8, 32 W, 265MA 12 - T12, 40 W, 430MA Options: F - Fused ⑧ T - Terminal Blocks ④ P - Polycarbonate lens ③ for IP65 EL- Emergency Battery Pack ① Fixture is not available with M1 or M2 cable entry options ② Cold weather standard for T8. ③ Use polycarbonate lens for IP65 rating. Polycarbonate lens is standard on FZ Series. ④ Standard equipment for FZ series ⑤ Fixture will be supplied with a 5’/1.5 m length of #14/3 cord and 3 prong plug (120 V) pre-installed when ordered with cable gland. Fixture with cable gland can only be used with hook and chain mounting. ⑥ ???. ⑦ FZ Series fixtures are not UL Listed for Class I, Division 2 when used with cable glands. FZ Series fixtures are UL Classified for Class I, Zone 2 when used with cable glands. ⑧ Canadian Electrical Code does NOT allow fusing in hazardous locations V. V CSA Certification only. 1076 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires Nonmetallic Fluorescent. Accessories and Replacement Parts 4 foot, 2 lamp fixtures. High-impact fiberglass reinforced polyester fixtures suitable for use in wet and damp locations. Item Description Catalog Number Hub 1/2” NPT watertight conduit hub FHUB Cable gland FGLAND 32 W (T8) and 40 W (T12) lampholder FS0C40 Standard plastic clips FPCLIP Acrylic lens cover FLENS Polycarbonate lens cover ① FPLENS Cable Gland Lampholder Lens Clip Lighting Lens Stainless steel bracket with mounting hardware (set of 2) FBRACKET 11 gauge (1/8”) stainless steel (set of 2) FVWFM Lighting: Enclosed and Gasketed — Area — Fluorescent Ceiling Mounting Bracket (Supplied standard with product) Fixed 45° Wall Mount ① Polycarbonate lens standard for FZ series. When used with FD series, fixture has an IP65 rating. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1077 FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires Nonmetallic Fluorescent. Dimensions 4 foot, 2 lamp fixtures. High-impact fiberglass reinforced polyester fixtures suitable for use in wet and damp locations. 38.75"/ 984.3 mm 6.50”/ 165.1 mm 8.25”/209.6 mm View of Fixture Cover 50.00”/ 1270 mm Side View Fixed 45° Wall Mount — FVWFM 7.44"/ 7 -41/9 189.0 mm 4” 1.25"/ Lighting 7.72"/ 196.1 mm 7-23/32” 1.50"/ 38.1mm 3-9/16” 0.31"/ 5/16” 7.9 mm DIA. Dia. 5.50"/ 139.7 mm 3.56"/ 90.4 mm 1-1/4” 31.8 mm 0.25"/ 1/4” 6.35 mm DIA. Dia. Lighting: Enclosed and Gasketed — Area — Fluorescent 3.25"/ 82.6 mm View of Fixture Mounting 1078 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires Nonmetallic Fluorescent. Photometric Data 4 foot, 2 lamp fixtures. High-impact fiberglass reinforced polyester fixtures suitable for use in wet and damp locations. Candela Distribution TOTAL LUMINAIRE EFFICIENCY = 84.6% REPORT NUMBER: ITL 47240 0.0 22.5 45.0 67.5 90.0 Flux CIE Type – Semi-Direct 0 1155 1155 1155 1155 1155 0˚ Plane: 90˚ 5 1159 1153 1150 1148 1148 110 Spacing Criteria: 1.3 Lamps: Two 32 W, 4-foot F32T8/TL735 fluorescents, 2850 lumens per lamp with acrylic lens. 1.5 15 1118 1118 1124 1134 1137 318 Shielding Angles: 1 0 25 1036 1049 1071 1109 1125 498 35 918 945 1010 1087 1114 636 45 766 812 927 1026 1056 710 55 569 652 788 900 927 690 65 342 450 598 719 753 574 75 148 259 432 567 604 434 85 25 133 318 444 473 312 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 % Ceiling RC 80 70 50 30 10 0 90˚ % Walls RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 4 98 270 376 412 ZONAL LUMEN SUMMARY 95 5 84 258 372 414 249 ZONE LUMENS 105 2 42 182 292 341 181 0- 30 115 0 13 69 139 182 79 0- 40 1562 125 0 3 22 36 50 21 0- 60 2962 135 0 0 9 15 19 7 0- 90 4282 145 0 0 2 7 9 2 90-120 509 155 0 0 0 0 2 0 90-130 529 165 0 0 0 0 0 0 90-150 538 175 0 0 0 0 0 0 90-180 539 180 0 0 0 0 0 75˚ 0 .98 .98 .98 .98 .95 .95 .95 .95 .89 .89 .89 .83 .83 .83 .78 .78 .78 .75 1 .88 .83 .78 .74 .84 .80 .76 .72 .75 .71 .68 .70 .67 .65 .65 .63 .61 .58 400 60˚ 926 2 .79 .71 .65 .59 .76 .69 .63 .58 .64 .59 .55 .60 .56 .52 .56 .52 .50 .47 3 .71 .62 .54 .48 .68 .60 .53 .47 .56 .50 .45 .52 .47 .43 .49 .45 .41 .39 800 45˚ 4 .65 .54 .46 .40 .62 .52 .45 .39 .49 .43 .38 .46 .41 .36 .43 .38 .35 .32 5 .60 .48 .40 .34 .57 .47 .39 .33 .44 .37 .32 .41 .35 .31 .38 .34 .30 .28 6 .55 .43 .35 .29 .53 .52 .34 .29 .39 .33 .28 .37 .31 .27 .35 .30 .26 .24 1200 0˚ 15˚ 7 .51 .39 .31 .26 .49 .38 .30 .25 .36 .29 .24 .33 .28 .24 .32 .27 .23 .21 30˚ 8 .47 .35 .28 .23 .45 .34 .27 .22 .32 .26 .22 .31 .25 .21 .29 .24 .20 .19 Legend 0-deg 45-deg 90-deg 9 .44 .32 .25 .20 .42 .31 .25 .20 .30 .24 .19 .28 .23 .19 .27 .22 .18 .17 10 .41 .30 .23 .18 .40 .29 .22 .18 .27 .22 .17 .26 .21 .17 .25 .20 .16 .15 0-180 4820 Candela Distribution TOTAL LUMINAIRE EFFICIENCY = 83.6% REPORT NUMBER: ITL 47241 0.0 22.5 45.0 67.5 90.0 Flux CIE Type – Semi-Direct 566 566 566 566 566 568 565 564 563 563 54 Spacing Criteria: 1.3 0˚ 1.5 15 548 549 550 554 555 156 Shielding Angles: 1 0 25 506 512 523 543 552 243 35 448 461 495 535 549 312 45 374 396 458 509 525 350 55 283 324 399 457 475 349 65 177 241 318 393 409 306 75 72 142 211 259 267 210 Plane: 90˚ Lamps: Two 32 W, 4-foot F32T8/TL735 fluorescents, 2850 lumens per lamp with polycarbonate lens. COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 90˚ 85 6 63 150 212 228 146 90 1 46 118 167 186 ZONAL LUMEN SUMMARY 95 1 43 122 176 198 118 ZONE LUMENS 105 0 20 115 0 125 75˚ 190 60˚ % Ceiling RC 80 70 50 30 10 0 % Walls RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 .97 .97 .97 .97 .94 .94 .94 .94 .88 .88 .88 .82 .82 .82 .77 77 77 .75 1 .87 .82 .78 .74 .84 .79 .75 .72 .74 .71 .68 .69 .67 .64 .65 .63 .61 .58 84 131 154 83 0- 30 453 5 33 74 92 40 0- 40 765 2 .78 .70 .64 .58 .75 .68 .62 .57 .63 .59 .54 .59 .55 .52 .55 .52 .49 .47 0 1 10 18 24 10 0- 60 1464 135 0 0 5 9 10 4 0- 90 2126 145 0 0 1 4 5 1 90-120 241 155 0 0 0 1 1 0 90-130 251 Legend 7 .50 .38 .31 .25 .48 .37 .30 .25 .35 .29 .24 .33 .27 .23 .31 .26 .22 .21 165 0 0 0 0 0 0 90-150 256 8 .46 .35 .27 .22 .45 .34 .27 .22 .32 .26 .21 .30 .25 .21 .28 .24 .20 .18 175 0 0 0 0 0 0 90-180 256 0-deg 45-deg 90-deg 180 0 0 0 0 0 380 45˚ 3 .71 .61 .53 .48 .68 .59 .52 .47 .55 .49 .45 .52 .47 .43 .48 .44 .41 .38 4 .64. 54 .46 .40 .62 .52 .44 .39 .48 .42 .37 .45 .40 .36 .43 .38 .34 .32 5 .59 .47 .39 .34 .56 .46 .39 .33 .43 .37 .32 .40 .35 .31 .38 .33 .29 .27 570 0˚ 15˚ 0-180 2383 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 30˚ 6 .54 .42 .35 .29 .52 .41 .34 .28 .39 .32 .27 .36 .31 .27 .34 .29 .26 .24 9 .43 .32 .25 .20 .42 .31 .24 .20 .29 .23 .19 .28 .22 .18 .26 .21 .18 .16 10 .41 .29 .22 .18 .39 .28 .22 .18 .27 .21 .17 .26 .20 .17 .24 .20 .16 .15 1079 Lighting: Enclosed and Gasketed — Area — Fluorescent 0 5 Lighting 90 0 FR™ Enclosed and Gasketed; FZ™ and FD™ Hazardous Locations Luminaires Nonmetallic Fluorescent. Photometric Data 4 foot, 2 lamp fixtures. High-impact fiberglass reinforced polyester fixtures suitable for use in wet and damp locations. Candela Distribution TOTAL LUMINAIRE EFFICIENCY = 80.7% REPORT NUMBER: ITL 47242 0.0 22.5 45.0 67.5 90.0 Flux CIE Type – Semi-Direct 0 1224 1224 1224 1224 1224 0˚ Plane: 90˚ 5 1228 1223 1221 1219 1218 116 Spacing Criteria: 1.3 Lamps: Two 40 W, 4-foot F40WW fluorescents, 3150 lumens per lamp with acrylic lens. 1.5 15 1185 1190 1204 1219 1222 341 Shielding Angles: 1 0 Lighting 25 1097 1122 1158 1200 1214 535 35 974 1020 1090 1166 1192 683 45 811 881 993 1094 1122 759 55 600 701 837 943 967 729 65 358 476 625 736 761 595 75 154 271 443 566 600 441 85 25 136 325 455 490 321 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 90˚ 90 5 101 285 401 442 ZONAL LUMEN SUMMARY 95 5 84 260 372 415 253 ZONE LUMENS 105 2 45 187 294 343 184 0- 30 115 0 14 125 0 135 75˚ 450 60˚ 992 80 70 50 30 10 % Walls RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 0 .94 .94 .94 .94 .91 .91 .91 .91 .85 .85 .85 .79 .79 .79 .74 .74 .74 .72 1 .84 .79 .75 .71 .81 .76 .73 .69 .71 .68 .65 .67 .64 .62 .62 .60 .58 .56 2 .76 .68 .62 .57 .72 .66 .60 .55 .61 .57 .53 .57 .53 .50 .54 .50 .48 .45 900 85 163 204 91 0- 40 1676 3 23 53 81 28 0- 60 3164 0 0 9 16 20 7 0- 90 4521 145 0 0 0 5 7 2 90-120 528 155 0 0 0 0 0 0 90-130 556 Legend 7 .49 .37 .30 .25 .47 .36 .29 .24 .34 .28 .24 .32 .27 .23 .30 .26 .22 .20 165 0 0 0 0 0 0 90-150 564 8 .45 .34 .27 .22 .43 .33 .26 .22 .31 .25 .21 .29 .24 .20 .28 .23 .20 .18 175 0 0 0 0 0 0 90-180 564 0-deg 45-deg 90-deg 180 0 0 0 0 0 45˚ 0˚ 15˚ 9 .42 .31 .24 .20 .40 .30 .24 .19 .29 .23 .19 .27 .22 .18 .26 .21 .18 .16 10 .39 .28 .22 .18 .38 .28 .22 .17 .26 .21 .17 .25 .20 .16 .24 .19 .16 .14 REPORT NUMBER: ITL 47243 0.0 22.5 45.0 67.5 90.0 Flux CIE Type – Semi-Direct 0˚ Plane: 4 .62 .52 .44 .39 .60 .50 .43 .38 .47 .41 .36 .44 .39 .35 .41 .37 .33 .31 6 .53 .41 .34 .28 .50 .40 .33 .28 .38 .32 .27 .35 .30 .26 .33 .29 .25 .23 30˚ TOTAL LUMINAIRE EFFICIENCY = 78.9% 0 1188 1188 1188 1188 1188 3 .68 .59 .52 .46 .66 .57 .51 .45 .53 .48 .43 .50 .45 .41 .47 .43 .40 .37 5 .57 .46 .39 .33 .55 .45 .38 .32 .42 .36 .31 .39 .34 .30 .37 .32 .29 .27 1350 0-180 5085 Candela Distribution Lighting: Enclosed and Gasketed — Area — Fluorescent % Ceiling RC 90˚ 5 1188 1186 1186 1184 1183 113 Spacing Criteria: 1.3 Lamps: Two 40 W, 4-foot F40WW fluorescents, 3150 lumens per lamp with polycarbonate lens. 1.5 15 1146 1155 1165 1177 1181 330 Shielding Angles: 1 0 25 1060 1085 1122 1165 1178 519 35 940 984 1055 1135 1161 663 45 782 850 970 1073 1102 738 55 589 687 836 950 977 725 65 367 500 652 765 791 618 75 145 293 437 548 563 431 85 12 132 306 428 464 302 COEFFICIENTS OF UTILIZATION - ZONAL CAVITY METHOD EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 90˚ % Ceiling RC 80 70 50 30 10 % Walls RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 90 4 106 270 381 421 ZONAL LUMEN SUMMARY 95 5 86 244 348 389 240 ZONE LUMENS 105 2 42 178 278 321 172 115 0 8 82 163 201 88 0- 40 1624 125 0 1 19 54 82 27 0- 60 3087 135 0 0 8 16 18 6 0- 90 4438 145 0 0 1 5 8 2 90-120 500 155 0 0 0 0 0 0 90-130 527 Legend 7 .47 .36 .29 .24 .46 .35 .29 .24 .33 .27 .23 .31 .26 .22 .30 .25 .21 .20 165 0 0 0 0 0 0 90-150 535 8 .44 .33 .26 .21 .42 .32 .26 .21 .30 .25 .20 .29 .23 .20 .27 .23 .19 .17 175 0 0 0 0 0 0 90-180 535 0-deg 45-deg 90-deg 180 0 0 0 0 0 1080 0- 30 75˚ 400 60˚ 961 0-180 4973 0 .92 .92 .92 .92 .89 .89 .89 .89 .83 .83 .83 .78 .78 .78 .73 .73 .73 .70 1 .82 .78 .74 .70 .79 .75 .71 .68 .70 .67 .64 .65 .63 .61 .61 .59 .57 .55 2 .74 .67 .61 .55 .71 .64 .59 .54 .60 .55 .52 .56 .52 .49 .53 .49 .47 .44 800 45˚ 3 .67 .58 .51 .45 .64 .56 .49 .44 .52 .47 .42 .49 .44 .41 .46 .42 .39 .37 4 .61 .51 .43 .38 .58 .49 .42 .37 .46 .40 .35 .43 .38 .34 .40 .36 .33 .31 5 .56 .45 .38 .32 .53 .44 .37 .31 .41 .35 .30 .38 .33 .29 .36 .32 .28 .26 1200 0˚ 15˚ 30˚ 6 .51 .40 .33 .28 .49 .39 .32 .27 .37 .31 .26 .35 .29 .25 .33 .28 .24 .23 9 .41 .30 .24 .19 .39 .29 .23 .19 .28 .22 .18 .26 .21 .18 .25 .20 .17 .16 10 .38 .28 .21 .17 .37 .27 .21 .17 .26 .20 .16 .24 .19 .16 .23 .19 .15 .14 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Applications • Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. • For use in locations where a high degree of corrosion resistance is required. • For indoor/outdoor use where protection against dirt, water and moisture is necessary. • Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food processing plants, warehouses, underground tunnels and general manufacturing facilities. 2 x 58 W Features • • • • • Fiberglass reinforced polyester housing Polycarbonate lens Elastomer gasket Highly reflective white polycarbonate internal reflector Mounting accessories available in different materials such as gray painted aluminum, zinc plated steel, galvanized steel or 316 stainless steel Options • Silicone coating for added protection in H2S hydrogen sulfide environments. • Without safety switch. • Level gauge light fitting. • 316 stainless steel fixing inserts. 2 x 18 W EOL Approved Certifications and Compliances • • • • • • • • • • • • • • Certification Type: FLe Zones 1 and 2 — Conforming to ATEX 94/9/CE: CE 0081 II 2 G — ATEX/IEC Protection: Ex de IIC or Ex demb IIC (emergency version) — T Rating: T5 ① to T4 Zone 21 and 22 — Conforming to ATEX 94/9/CE: CE 0081 II 2 D — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: 167 °F/75 °C Ambient Temperature: -40 °F to 131 °F / -40 °C to 55 °C CE Declaration of Conformity: 50201 ATEX Certificate: LCIE 07 ATEX 6017 IECEx Certificate: LCIE Ex 04.0017 Other Certifications: GOST, Marine Listed UL 1598A Index of Protection (solid & liquid): IP66/67 Impact Resistance (shock): IK10 Ex Standards: EN / IEC 60079-0; 60079-1; 60079-7; 60079-18; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1; 60598-2-22 EMC Standards: EN / IEC 55015; 61547 Other Standards: EN / IEC 60529 (IP); 62262 (IK) ① With ceiling position use at 104 °F/40 °C ambient temperature Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1081 Lighting: Enclosed and Gasketed — Area — Fluorescent Standard Materials 2 x 36 W Lighting • Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens. • High impact resistance housing (20 Joules – IK10) from -40 °F to 131 °F / -40 °C to 55 °C ambient temperature and wind profile for use in extreme offshore and onshore environments. • Latch assembly and elastomer gasket seals against water and dust ingress, IP66/67. • Easily accessed for maintenance using Allen key or straight blade screwdriver. • Central opening with unique patented release system to prevent damage. • Hinged parabolic reflector for high lumen output efficiency. • Vibration resistant spring loaded lampholders for bi-pin (G13) or mono-pin (Fa6) versions. • Positive safety switch disconnects power to lamps and ballast to allow maintenance in hazardous locations. • Electronic multi-tap ballast 110 to 254 Vac/Vdc +/- 10% 50/60 Hz, for global applications. High power factor electronic ballast (>0.95). EOL (End Of Life) protection in accordance to the latest EN/IEC 60079-7 standard. • Two channel ballast prevents dark areas by allowing one lamp to remain lit if one fails. • Ballast plug-in with Ex e connector for quick and error-free maintenance. • Available in 3 hours emergency version, including multi-tap ballast with built-in monthly self test. Test results through multicolored LED. • Ex e battery with plug-in connector for maintenance in hazardous location. FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Illustrated Features Can be mounted horizontally or vertically Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For FE Nonmetallic Fluorescent Lighting Fixtures FE B 1 Lighting Series: FE - FE Series Zone 1, 2, 21, 22 ATEX / IEC Certified BU P Wattage: 18 - 18 Watt 36 - 36 Watt 58 - 58 Watt Lamp Type: B - Bi-pin (G13) M - Mono Pin (Fa6) Lighting: Enclosed and Gasketed — Area — Fluorescent 18 Number of Lamps: 1 - Single 2 - Double 3 - Three Lamps A C Cable Type: A - Armored M20 N - Unarmored M25 U - Unarmored M20 Voltage: BU - 110 to 254 Vac/Vdc 50/60 Hz BK - 220 to 240 Vac/Vdc 50/60 Hz Cable Type: A - Armored M20 N - Unarmored M25 U - Unarmored M20 Mounting Version: P - Pole Mount ① S - Surface/Suspension Mount Standard Wiring T - Surface/Suspension Mount Through Wiring L - Surface/Suspension Mount Dual Loop in/out Through Wiring (single phase) ① Only 2 x 18 W and 2 x 36 W with M25 entry versions. ② Only 36 W and 58 W emergency versions. ③ Only for single standard versions. ④ Only for standard versions. ⑤ Only for S, T and L mounting versions. 1082 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Surface/Suspension Mounting and Standard Wiring Version Connection via 1 x 6 terminals. Capacity (flexible/solid): 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13) Three M25 threaded entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide plugs. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 1 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB118BUSN 2 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB218BUSN 1 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB136BUSN 2 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB236BUSN 3 36 G13 110/254 21.83/9.9 3307.49/54.2 FEB336BUSN 1 58 G13 110/254 19.84/9 3966.54/65 FEB158BUSN 2 58 G13 110/254 19.84/9 3966.54/65 FEB258BUSN 3 58 G13 110/254 24.3/11 3966.54/65 FEB358BUSN Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry, supplied with two M20 polyamide plugs. Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 1 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB118BUSA 2 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB218BUSA 1 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB136BUSA 2 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB236BUSA 3 36 G13 110/254 21.83/9.9 3307.49/54.2 FEB336BUSA 1 58 G13 110/254 19.84/9 3966.54/65 FEB158BUSA 2 58 G13 110/254 19.84/9 3966.54/65 FEB258BUSA 3 58 G13 110/254 24.3/11 3966.54/65 FEB358BUSA Unarmored Version - Mono-pin (Fa6) Three M25 threaded entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide plugs. Catalog Number Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) 2 18 Fa6 110/254 12.13/5.5 1971.07/32.3 FEM218BUSN 2 36 Fa6 110/254 17.42/7.9 3307.49/54.2 FEM236BUSN 2 58 Fa6 110/254 19.84/9 3966.54/65 FEM258BUSN Armored Version - Mono-pin (Fa6) Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry supplied with two M20 polyamide plugs. Catalog Number Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) 2 18 Fa6 110/254 12.13/5.5 1971.07/32.3 FEM218BUSA 2 36 Fa6 110/254 17.42/7.9 3307.49/54.2 FEM236BUSA 2 58 Fa6 110/254 19.84/9 3966.54/65 FEM258BUSA Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1083 Lighting: Enclosed and Gasketed — Area — Fluorescent Power (W) Lighting Number of Lamps FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Surface/Suspension Mounting and Through Wiring Version (three phase) Connection via 2 x 5 terminals. Capacity (flexible/solid): 0.006 in2/0.009 in2 / 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13) Three M25 threaded entries, two at one end and one at opposite end, supplied with two M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and one M25 polyamide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 2 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB218BUTN 2 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB236BUTN 2 58 G13 110/254 19.84/9 3966.54/65 FEB258BUTN Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with brass earth continuity plate at opposite end, supplied with one M20 polyamide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 2 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB218BUTA 2 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB236BUTA 2 58 G13 110/254 19.84/9 3966.54/65 FEB258BUTA Surface/Suspension Mounting and Dual Loop In/Out Through Wiring Version (single phase): Connection via 1 x 6 terminals and 1 x 3 terminals. Capacity (flexible/solid): 0.006in2/0.009in2 / 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13) Three M25 entries, two at one end and one at opposite end, supplied with two M25 polyamide cable glands (dia. 8 to 18.5 mm) and one M25 polyamide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 2 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB218BULN 2 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB236BULN 2 58 G13 110/254 19.84/9 3966.54/65 FEB258BULN Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with brass earth continuity plate at opposite end, supplied with one M20 polyamide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 2 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB218BULA 2 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB236BULA 2 58 G13 110/254 19.84/9 3966.54/65 FEB258BULA 1084 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Pole Mounting Version Connection via 1 x 3 terminals. Capacity (flexible/solid): 0.006 in2/0.009 in2 / 4 mm2/6 mm2. For mounting on dia. 1.65"/42 mm pole or tubular wall-mounting support, supplied with one integrated M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm). Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Catalog Number 2 18 G13 110/254 13.67/6.2 2080.91/34.1 FEB218BUPN 2 36 G13 110/254 19.18/8.7 3307.49/54.2 FEB236BUPN Level Gauge Tank Light Surface/Suspension Mounting with Standard Wiring Connection via 1 x 6 terminals. Capacity (flexible/solid): 0.006 in2/0.009 in2 / 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13) Three M25 entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide plugs. Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) 1 18 G13 110/254 12.13/5.5 1971.07/32.3 FEB118BUSNL 1 36 G13 110/254 17.42/7.9 3307.49/54.2 FEB136BUSNL 1 58 G13 110/254 19.84/9 3966.54/65 FEB158BUSNL Catalog Number Lighting Number of Lamps Lighting: Enclosed and Gasketed — Area — Fluorescent Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1085 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Surface/Suspension Mounting and Standard Wiring Connection via 1 x 4 terminals for 18 W version. Connection via 1 x 8 terminals for 36 W & 58 W versions. Capacity (flexible/solid): 0.006 in2/0.009 in2 / 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13) Three M25 entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide plugs. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity 2 2 2 3 2 2 3 18 36 36 36 58 58 58 G13 G13 G13 G13 G13 G13 G13 110/254 110/254 110/254 110/254 110/254 110/254 110/254 16.09/7.3 21.16/9.6 21.16/9.6 25.57/11.6 23.59/10.7 23.59/10.7 28.00/12.7 1971.07/32.3 3307.49/54.2 3307.49/54.2 3307.49/54.2 3966.54/65 3966.54/65 3966.54/65 3H 3H 3H 3H 3H 3H 3H 4Ah 4Ah 7Ah 4Ah 4Ah 7Ah 4Ah Catalog Number FEB218BUSNE FEB236BUSNE FEB236BUSNE7 FEB336BUSNE FEB258BUSNE FEB258BUSNE7 FEB358BUSNE Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry, supplied with two M20 polyamide plugs. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity 2 2 2 3 2 2 3 18 36 36 36 58 58 58 G13 G13 G13 G13 G13 G13 G13 110/254 110/254 110/254 110/254 110/254 110/254 110/254 16.09/7.3 21.16/9.6 21.16/9.6 25.57/11.6 23.59/10.7 23.59/10.7 28.00/12.7 1971.07/32.3 3307.49/54.2 3307.49/54.2 3307.49/54.2 3966.54/65 3966.54/65 3966.54/65 3H 3H 3H 3H 3H 3H 3H 4 Ah 4 Ah 7 Ah 4 Ah 4 Ah 7 Ah 4 Ah Catalog Number FEB218BUSAE FEB236BUSAE FEB236BUSAE7 FEB336BUSAE FEB258BUSAE FEB258BUSAE7 FEB358BUSAE Unarmored Version - Mono-pin (Fa6) Three M25 entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide plugs. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity 2 2 2 2 2 18 36 36 58 58 Fa6 Fa6 Fa6 Fa6 Fa6 110/254 110/254 110/254 110/254 110/254 16.76/7.6 21.83/9.9 21.83/9.9 24.25/11 24.25/11 1971.07/32.3 3307.49/54.2 3307.49/54.2 3966.54/65 3966.54/65 3H 3H 3H 3H 3H 4 Ah 4 Ah 7 Ah 4 Ah 7 Ah Catalog Number FEM218BUSNE FEM236BUSNE FEM236BUSNE7 FEM258BUSNE FEM258BUSNE7 Armored Version - Mono-pin (Fa6) Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry, supplied with two M20 polyamide plugs. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity 2 2 2 2 2 18 36 36 58 58 Fa6 Fa6 Fa6 Fa6 Fa6 110/254 110/254 110/254 110/254 110/254 16.76/7.6 21.83/9.9 21.83/9.9 24.25/11 24.25/11 1971.07/32.3 3307.49/54.2 3307.49/54.2 3966.54/65 3966.54/65 3H 3H 3H 3H 3H 4 Ah 4 Ah 7 Ah 4 Ah 7 Ah 1086 Catalog Number FEM218BUSAE FEM236BUSAE FEM236BUSAE7 FEM258BUSAE FEM258BUSAE7 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Surface/Suspension Mounting and Through Wiring Version Connection via 2 x 4 terminals. Capacity (flexible/solid):0.006 in2/0.009 in2 / 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13): Three M25 entries, two at one end and one at opposite end, supplied with two M25 polyamide cable glands (dia. 0.31 to 0.73" / 8 to 18.5 mm) and one M25 polyamide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity 2 18 Bi-pin 110/254 16.09/7.3 1971.07/32.3 3H 4 Ah Catalog Number FEB218BUTNE 2 36 Bi-pin 110/254 21.16/9.6 3307.49/54.2 3H 4 Ah FEB236BUTNE 2 36 Bi-pin 110/254 21.16/9.6 3307.49/54.2 3H 7 Ah FEB236BUTNE7 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 4 Ah FEB258BUTNE 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 7 Ah FEB258BUTNE7 Armored Version - Bi-pin (G13): Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with brass earth continuity plate at opposite end, supplied with one M20 polymaide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity Catalog Number 18 Bi-pin 110/254 16.09/7.3 1971.07/32.3 3H 4 Ah FEB218BUTAE 36 Bi-pin 110/254 21.16/9.6 3307.49/54.2 3H 4 Ah FEB236BUTAE 2 36 Bi-pin 110/254 21.16/9.6 3307.49/54.2 3H 7 Ah FEB236BUTAE7 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 4 Ah FEB258BUTAE 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 7 Ah FEB258BUTAE7 Lighting 2 2 Lighting: Enclosed and Gasketed — Area — Fluorescent Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1087 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Surface/Suspension Mounting and Dual Loop In/Out Through Wiring Version (single phase) Connection via 1 x 4 double deck terminals for 18 W version. Connection via 1 x 8 terminals and 1 x 4 terminals for 36 W & 58 W versions. Capacity (flexible/solid): 0.006 in2/0.009 in2 / 4 mm2/6 mm2. or Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Unarmored Version - Bi-pin (G13) Three M25 entries, two at one end and one at opposite end, supplied with two M25 polyamide cable glands (dia. 0.31 to 0.73" / 8 to 18.5 mm) and one M25 polyamide plug. 18 W 36/58 W Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity Catalog Number 2 18 Bi-pin 110/254 16.76/7.6 1971.07/32.3 3H 4 Ah FEB218BULNE 2 36 Bi-pin 110/254 21.83/9.9 3307.49/54.2 3H 4 Ah FEB236BULNE 2 36 Bi-pin 110/254 21.83/9.9 3307.49/54.2 3H 7 Ah FEB236BULNE7 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 4 Ah FEB258BULNE 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 7 Ah FEB258BULNE7 Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 threaded entry with brass earth continuity plate at opposite end, supplied with one M20 polyamide plug. Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity Catalog Number 2 18 Bi-pin 110/254 16.76/7.6 1971.07/32.3 3H 4 Ah FEB218BULAE 2 36 Bi-pin 110/254 21.83/9.9 3307.49/54.2 3H 4 Ah FEB236BULAE 2 36 Bi-pin 110/254 21.83/9.9 3307.49/54.2 3H 7 Ah FEB236BULAE7 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 4 Ah FEB258BULAE 2 58 Bi-pin 110/254 23.59/10.7 3966.54/65 3H 7 Ah FEB258BULAE7 Pole Mounting Version Connection via 1 x 4 terminals. Capacity (flexible/solid): 4 mm2/6 mm2. 18 W - Actual Size 2'/0.6m 36 W - Actual Size 4'/1.2m For mounting on dia. 42 mm pole or tubular wall-mounting support, supplied with one x M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm). Number of Lamps Power (W) Lamp Type Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Duration (Hours) Battery Capacity Catalog Number 2 18 Bi-pin 110/254 22.05/10 3307.49/54.2 3H 4 Ah FEB218BUPNE 2 36 Bi-pin 110/254 22.93/10.4 3307.49/54.2 3H 4 Ah FEB236BUPNE 2 36 Bi-pin 110/254 22.93/10.4 3307.49/54.2 3H 4 Ah FEB236BUPNE7 Note: 2 x 18 W is supplied with external battery pack (see dimensional data). 1088 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaires Accessories Standard and Emergency Battery Back-Up. Increased Safety Description Pack Catalog Number Fixing Brackets Set of two brackets for surface installation Zinc plated steel 1 FEFBZ 316 stainless steel 1 FEFBS Aluminum (gray painted) 1 FESBA 316 stainless steel 1 FESBS 1 FERBM8Z Brackets for Surface Mounting Set of two M8 Ring Bolts Set of two Zinc plated steel Half Clamps Brackets for Pole Mounting Set of two Dia. 1.65 to 1.93" / 42 to 49 mm pole (1.25 to 1.5" / 31.8 to 38.1 mm tube) 1 FEHC49Z 316 stainless steel 1 FEHC49S Zinc plated steel 1 FEHC60Z 316 stainless steel 1 FEHC60S 1 FEWMG Aluminum 1 FEHBA 316 stainless steel 1 FEHBS Lighting Zinc plated steel Dia. 2.36"/60 mm pole (2"/50.8mm tube) Lighting: Enclosed and Gasketed — Area — Fluorescent Wall Mounting Adaptor For pole mounting version (dia. 1.65"/42 mm) Galvanized steel Hinged Brackets Set of two brackets for adjusting luminaire Fall Prevention Kit Safety chain retains fixture temporarily to ease installation For M25 cable entry 1 FESCM25 For M20 cable entry 1 FESCM20 1 096905 Adaptor for Fa8 Tube on Fa6 Lampholder Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1089 FE Series Nonmetallic Fluorescent Luminaire Technical Data Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Wiring Diagram Emergency Function Diagram Two Lamp Version Mains PE N Mains L Lighting Switch Lighting Switch ON Lighting Switch OFF Lighting Switch ON Lighting Switch OFF ON L’ U N PE Standard Fluorescent Lighting Fixture OFF Three Lamp Version Mains U’ U N PE Emergency Fluorescent Lighting Fixture ON Lighting OFF LED Status Lighting: Enclosed and Gasketed — Area — Fluorescent Color Indication Function LED glows Batteries are connected LED blinks Batteries are charged Red LED blinks Batteries are not connected or defect Yellow LED blinks Batteries are charging and discharging during automatic cycle Green Emergency Light Duration Version 2 x 18 W 2 x 36 W 2 x 58 W 1090 Battery Capacity Duration Light Output 4 Ah – 6 V 3 hours 45% 4 Ah – 6 V 3 hours 15% 7 Ah – 6 V 3 hours 25% 4 Ah – 6 V 3 hours 9% 7 Ah – 6 V 3 hours 15% Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaire Dimensions Standard and Emergency Battery Back-Up. Increased Safety Dimensions in Inches/Millimeters Surface/Suspension Mounting 18 Watt 36 Watt 2 X MB 15.75"/ 400.0 mm 2 X MB 27.56"/ 700.0 mm 54.72"/ 1390.0 mm 30.91"/785.0 mm 58 Watt End View 2 X MB 27.56"/ 700.0 mm 5.71"/ 145.0 mm 8.54"/ 217.0 mm 66.54"/ 1690.0 mm Pole Mounting 18 Watt 10.19"/ 258.8 258.8 mm Lighting Ø 1.65"/ 42.0 mm End View 5.71"/ 145.0 mm 1.99"/ 50.0 mm 8.58”/ 218.0 mm 30.91"/ 785.0 mm 36 Watt Lighting: Enclosed and Gasketed — Area — Fluorescent 1.99"/ 50.0 mm 54.72"/ 1390.0 mm Emergency Pole Mounting 18 Watt Ø 1.65"/ 42.0 mm End View 10.19"/ 258.8 mm 3.58"/ 91.0 mm 1.99"/ 50.0 mm 4.72"/ 120.0 mm 30.91"/ 785.0 mm 5.71"/ 145.0 mm 8.58”/ 218.0 mm 39.37"/ 1000.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1091 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Set of two quick fixing brackets for ease of surface mounting Zinc plated steel or stainless steel 2.52"/ 64 mm 0.35"/ 9.0 mm 8.5 1.18"/ 30 mm 0.33"/ 8.5 mm 0.16"/ 9.0 mm 0.98"/ 25.0 mm 1.93"/ 49.0 mm Lighting Set of two brackets for surface mounting. Gray painted aluminum or stainless steel. 9.13"/ 232 mm 0.51"/ 13.0 mm 0.37"/ 9.59.5 mm 1.26"/ 32.0 mm 0.57"/ 14.5 mm 14.5 Set of two ring bolts. Zinc plated steel. 0.79"/ 20.0 mm 0.31"/ 8.0 mm 0.59"/ 1.42"/ 15.0 mm 36.0 mm Lighting: Enclosed and Gasketed — Area — Fluorescent 1.50"/ 38.0 mm 7.87"/ 200 mm M 8 x 1.25 1092 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/67 – IK10 Set of two clamps for pole dia. 1.65”/42 mm to 2.36”/60 mm (1-1/4" to 2"). Zinc plated steel or stainless steel. 95 for 1.25"/31.8 mm or 1.50"/38.1mm 2.95”/ 75.0 mm 0.55”/ 14.0 mm or 84 for 2.00"/50.8mm 1.25"/31.8 mm or 1.50"/38.1mm ”/ 36 2. m Ø 0m 6 3.31”/ 85 mm 0.55”/ 14.0 mm 2.00"/50.8mm 1.65”/42 mm dia. galvanized steel wall mounting pole. 0.47”/ 12.0 mm Lighting m 0.0 m 2”/43 16.9 Ø 0.79”/ 20.0 mm 5.51”/140.0 mm ”/ 1.65 m m 42.0 0.20”/5.0 mm mm /75.0 2.95” 5.98”/152.0 mm 5.04”/128.0 mm Lighting: Enclosed and Gasketed — Area — Fluorescent Ø 0.41”/ 10.5 mm Set of two hinged brackets for adjusting luminaire. Gray painted aluminum or stainless steel. 1.26”/ 32.0 mm 0.22”/ 5.5 mm 3 77 .03” .0 / mm 3 82 .23 .0 ”/ mm 0.71”/ 18.0 mm 30 60 90 0 90 30° 1.61”/ 41.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 0.57”/ 14.5 mm 5.20”/132 mm 60 3.94”/ 100.0 mm 30° 30 M8x1.25"/ 31.8 mm 0.51”/ 0.37”/ 13.0 mm 9.5 mm 1093 FE Series Nonmetallic Fluorescent Luminaire Photometric Data Standard and Emergency Battery Back-Up. Increased Safety Longitudinal Transverse Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 1 x 36 W Efficiency 89.3% NF C 71-121: 0.81 H + 0.08 T 1 x 18 Watt TOTAL LUMINAIRE EFFICIENCY = 94.8% NF C 71-121: 0.86 H + 0.09 T Candela Distribution Candela Distribution 0-180 90-270 0-180 90-270 Lighting Candela Distribution 0-180 90-270 0 215 215 0 205 205 0 198 5 214 Degrees214 5 204 Degrees203 5 197Degrees 197 198 211 215 90° 10 202 203 90° 10 194 198 90° 15 207 213 75° 15 197 202 75° 15 190 197 75° 20 200 211 20 191 201 20 184 195 25 191 209 25 182 201 25 176 194 30 181 208 30 173 200 30 166 193 35 169 202 35 161 192 35 155 187 40 155 196 40 148 183 40 142 180 45 139 187 45 133 177 45 128 174 50 122 181 50 117 173 50 113 170 55 103 175 55 99 168 55 96 167 60 83 174 60 80 168 60 78 163 65 62 173 65 61 163 65 59 157 70 42 165 70 41 154 70 41 151 10 Lighting: Enclosed and Gasketed — Area — Fluorescent 1 x 58 W Efficiency 87.5% NF C 71-121: 0.80 H + 0.07 T 60° 45° 30° 0° 15° 2 x 18 W Efficiency 85.1% NF C 71-121: 0.78 H + 0.08 T 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 90° 75° 60° 45° 30° 0° 15° 3 x 18 W Efficiency 68.1% NF C 71-121: 0.63 G + 0.05 T Candela Distribution 0-180 90-270 0 185 Degrees185 5 185 184 10 182 182 15 178 181 20 172 183 25 164 183 30 154 183 35 143 183 40 131 183 45 117 179 50 102 173 55 85 166 60 68 155 65 51 145 70 35 141 Candela Distribution 0-180 90-270 173 Degrees173 172 172 169 170 135 169 160 169 153 168 144 167 135 162 123 158 110 153 96 146 82 136 66 123 50 111 34 100 0-180 90-270 174 Degrees174 174 174 171 173 167 171 162 171 155 170 146 168 136 163 125 159 112 153 98 145 83 135 67 123 51 110 35 100 1094 30° 0° 15° 90° 75° 60° 45° 30° 0° 15° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 60° 45° 30° 0° 15° 2 x 58 W Efficiency 76.9% NF C 71-121: 0.70 H + 0.07 T 90° 75° 60° 45° 30° 0° 15° 3 x 36 W Efficiency 68.1% NF C 71-121: 0.63 G + 0.07 T Candela Distribution 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 45° 2 x 36 W Efficiency 80.5% NF C 71-121: 0.73 H + 0.07 T Candela Distribution 0-180 90-270 195 Degrees195 195 194 192 192 187 192 181 193 173 194 163 194 152 193 138 192 124 191 108 183 91 176 73 163 55 150 37 145 60° Candela Distribution 0-180 90-270 0 173Degrees 173 5 172 173 10 170 171 15 166 169 20 161 172 25 154 172 30 145 172 35 135 171 40 123 172 45 111 170 50 97 165 55 82 157 60 66 148 65 50 139 70 34 133 90° 75° 60° 45° 30° 0° 15° 3 x 58 W Efficiency 65.6% NF C 71-121: 0.61 H + 0.04 T Candela Distribution 90° 75° 60° 45° 30° 0° 15° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 170Degrees 170 170 170 167 168 163 169 158 167 151 167 143 163 133 159 122 155 109 149 95 140 81 129 65 116 49 105 33 96 90° 75° 60° 45° 30° 0° 15° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 & 22 Zone 2 & 22 II 3 GD ATEX - IEC IP65/67 Applications • Light duty luminaire ideal for commercial and light industrial locations including hazardous areas designated as Zone 2 or 22 environments. • Typical applications include oil refineries petrochemical plants, pulp and paper mills, tunnels and other light duty manufacturing locations. 2 x 58 W Features • • • • Utilizes two 26 mm (T8) bi-pin fluorescent lamps. Fiberglass reinforced polyester housing. Instant start 95% power factor ballast. Available in various lengths and wattages ranging from 18 to 58. Pre-impregnated fiberglass reinforced white polyester housing. • Closing system using stainless steel clips. • Electrostatically applied white powder painted steel reflector provides optimal lighting distribution. • Poured-in-place elastomer gasket secures IP65 / 67 ingress protection. Standard Material • • • • • • Options Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 • • Certification Type: EFn (Standard Version) / EFn-EM (Emergency Version Zone 2 — Conforming to ATEX 94/9/CE: CE II 3 G — ATEX/IEC Protection: Ex nR II or Ex nA II — T Rating: T4 for nA protection mode. See temperature chart for nR protection mode • Zone 22 — Conforming to ATEX 94/9/CE: CE II 3 D — ATEX/IEC Protection: Ex tD A22 — Surface Temperature: (See table) • Ambient Temperature: -4 °F to 131 °F / -20 °C to +55 °C • CE Declaration of Conformity: 50213/50219 • ATEX Certificate: LCIE 08.6005X / LCIE 08.6063X • IECEx Certificate: LCIE Ex 08.007X / LCIE Ex 08.008X • Index of Protection (solid & liquid): IP65 / 67 • Time Before Opening: 10mn • Ex Standards: EN / IEC 60079-15; 61241-0; 61241-1 • Product Standards: EN / IEC 60598-1; 60598-2-22 • EMC Standards: EN / IEC 55015; 61547 • Other Standards: EN / IEC 60529 (IP) Lighting: Enclosed and Gasketed — Area — Fluorescent • Available in 3 hours emergency version, including multi-tap ballast with built-in monthly self test. Test results through multicolored LED. • Plug-in battery pack is easy to remove for maintenance. • Battery voltage is 6 volts and 4 Ah capacity. • One fluorescent tube remains lit for up to 3 hours and up to 29% light intensity for 18 Watt, 15% for 36 Watt and 9% for 58 Watt. • All emergency units supplied with cut off switch to battery when fixture is opened. Certifications and Compliances Lighting Fiberglass reinforced polyester (FRP) housing Polycarbonate lens White powder painted sheet steel reflector Elastomer gasket Polycarbonate lampholders Mounting accessories available in different materials such as gray painted aluminum, zinc plated steel, galvanized steel or 316 stainless steel 2 x18 W 1095 FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 & 22 Zone 2 & 22 II 3 GD ATEX - IEC IP65/67 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For FN Non-Metallic Fluorescent Lighting Fixtures FN B 1 18 BU Wattage: 18 - 18 Watt 36 - 36 Watt 58 - 58 Watt 55 - 55 Watt 80 - 80 Watt Series: FN - FN Series Zone 2, 21 & 22 ATEX/IEC Certified Lamp Type: B - Bi-pin (G13) C - PL Compact Lamps (2G11) ② A C Cable Type: A - Armored M20 N - Unarmored M25 U - Unarmored M20 Voltage: BU - 110 to 254 Vac/Vdc 50/60 Hz BK - 220 to 240 Vac/Vdc 50/60 Hz Options: (Options must be listed alphabetically) C - Silicon Coating for Diffuser E - 3H Emergency (combined) - Battery 6 V - 4 Ah N - No Switch ③ X - 4 Entries ④ Mounting Version: P - Pole Mount ① S - Surface/Suspension Mount Standard Wiring T - Surface/Suspension Mount Through Wiring L - Surface/Suspension Mount Dual Loop in/out Through Wiring (single phase) Lighting Number of Lamps: 1 - Single 2 - Double 3 - Three Lamps Lighting: Enclosed and Gasketed — Area — Fluorescent P Temperature Chart Version 1 x 18 W 2 x 18 W 1 x 36 W 2 x 36 W 1 x 58 W 2 x 58 W Dust Surface Temp. 167°F/75°C 181°F/83°C 196°F/91°C T Rating for Ta = 104° F/40° C Gas T Rating for Ta = 122°F/50°C T Rating for Ta = 131°F/55°C T6 T6 T6 T6 T5 T5 T6 T6 T5 T6 T6 T5 T5 T5 T5 T5 T5 T5 ① Only 2 x 18 W and 2 x 36 W with M25 entry versions. ② Only 55 W and 80 W standard versions. ③ Only for standard versions. ④ Only for S, T and L mounting versions. 1096 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 & 22 Zone 2 & 22 II 3 GD ATEX - IEC IP65/67 Standard Version for Armored and Unarmored Cable Supplied with one M20 cable entry at each end plus two locknuts, two earth continuity and one blanking plug. Also supplied with one 2 x (0.004 x 0.003 in2 / 3 x 2.5 mm2) max. flexible or rigid connection terminal block. Number of Lamps Watts Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Pack. Catalog Number 1 18 220/240 5.07/2.3 1360.83/22.3 1 FLB118BKSA 2 18 220/240 5.07/2.3 1360.83/22.3 1 FLB218BKSA 2 18 110/254 5.07/2.3 1360.83/22.3 1 FLB218BUSA 1 36 220/240 6.17/2.8 2318.90/38 1 FLB136BKSA 1 36 110/254 6.17/2.8 2318.90/38 1 FLB136BUSA 2 36 220/240 7.94/3.6 2318.90/38 1 FLB236BKSA 2 36 110/254 7.94/3.6 2318.90/38 1 FLB236BUSA 1 58 220/240 7.50/3.4 2746.07/45 1 FLB158BKSA 1 58 110/254 7.50/3.4 2746.07/45 1 FLB158BUSA 2 58 220/240 9.70/4.4 2746.07/45 1 FLB258BKSA 2 58 110/254 9.70/4.4 2746.07/45 1 FLB258BUSA Lighting Emergency Version for Armored and Unarmored Cable Supplied with one M20 entries with earth continuity at each end. Also supplied with two M20 locknuts and one blanking plug. Equipped with one 2 x (0.008 x 0.003 in2 / 5 x 2.5 mm2) max. flexible or rigid connection terminal block Watts Voltage (V) Weight (lbs/kg) Volume (in3/dm3) Pack. Catalog Number 2 18 110/254 9.92/4.5 1360.83/22.3 1 FLB218BUSAE 2 36 110/254 15.43/7.0 2318.90/38 1 FLB236BUSAE 2 58 110/254 16.53/7.5 2746.07/45 1 FLB258BUSAE Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1097 Lighting: Enclosed and Gasketed — Area — Fluorescent Number of Lamps FL Series Light Duty Nonmetallic Fluorescent Luminaire Accessories Standard and Emergency Back-Up. Zone 2 & 22 Zone 2 & 22 II 3 GD ATEX - IEC IP65/67 Description Pack Catalog Number Fixing Brackets Set of two brackets for surface installation Zinc plated steel 1 FEFBZ 316 stainless steel 1 FEFBS Aluminum (gray painted) 1 FESBA 316 stainless steel 1 FESBS 1 FERBM8Z Brackets for Surface Mounting Set of two M8 Ring Bolts Set of two Zinc plated steel Half Clamps Brackets for Pole Mounting Set of two Lighting Dia. 1.65 to 1.93" / 42 to 49 mm pole (1.25 to 1.5" / 31.8 to 38.1 mm tube) Zinc plated steel 1 FEHC49Z 316 stainless steel 1 FEHC49S Zinc plated steel 1 FEHC60Z 316 stainless steel 1 FEHC60S Aluminum 1 FEHBA 316 stainless steel 1 FEHBS 1.20 M stainless steel chain 1 FDSCS Lighting: Enclosed and Gasketed — Area — Fluorescent Dia. 2.36"/60 mm pole (2"/50.8mm tube) Hinged Brackets Set of two brackets for adjusting luminaire Fall Prevention Kit 1098 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FL Series Light Duty Nonmetallic Fluorescent Luminaire Technical Data Standard and Emergency Back-Up. Zone 2 & 22 Zone 2 & 22 II 3 GD ATEX - IEC IP65/67 Emergency Function Diagram — Emergency Function 2 Tubes Mains Lighting Switch ON Lighting Switch OFF Fluorescent Luminaire ON Fluorescent Luminaire OFF Photometric Data Longitudinal Transverse Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 1 x 18 W Efficiency 67.8% NF C 71-121: 0.58 H + 0.09 T 2 x 18 W Efficiency 68.9% NF C 71-121: 0.60 H + 0.09 T Candela Distribution 90-270 0 142 142 5 142 142 10 139 140 15 135 135 20 130 132 25 123 128 30 113 126 35 102 128 90 132 78 136 50 66 134 55 54 131 60 43 129 0-180 116 116 90° 5 115 119 10 113 133 75° 15 110 150 20 105 156 25 100 157 Degrees 60° 45° 30° 0° 90-270 0 15° 30 94 158 35 88 159 40 81 158 45 74 157 50 65 152 55 55 145 60 45 137 65 33 119 65 35 128 70 23 110 70 25 114 2 x 36 W Efficiency 64.1% NF C 71-121: 0.57 H + 0.07 T 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 90° 75° 60° 45° 30° 0° 15° 2 x 58 W Efficiency 63.6% NF C 71-121: 0.56 H + 0.07 T Candela Distribution 0-180 163 162 160 155 149 142 132 120 104 80 60 50 40 31 23 Degrees Lighting: Enclosed and Gasketed — Area — Fluorescent 40 45 Candela Distribution Lighting 0-180 90-270 163 162 159 145 140 139 139 138 134 133 129 125 120 108 95 Candela Distribution Degrees 90° 75° 60° 45° 30° 0° 15° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 160 159 157 153 148 141 132 121 107 85 68 56 45 35 24 90-270 160 160 157 146 140 139 139 138 134 132 127 122 117 107 90 Degrees 90° 75° 60° 45° 30° 0° 15° 1099 FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 - 21 & 22 Zone 2 - 21 & 22 II 3 GD and II 2 D ATEX / IECEx IP66/67 - IK10 Applications • Can be installed in hazardous areas designated as Zone 2, 21 and 22. • For use in locations where a high degree of corrosion resistance is required. • For indoor/outdoor use where protection against dirt, water and moisture is necessary. • Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food processing plants, warehouses, underground tunnels and general manufacturing facilities. 2 x 58 W Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Features • Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens. • High impact resistance housing (20 Joules - IK10) from -40° F to 131 °F / -40°C to 55 °C ambient temperature and wind profile for use in extreme offshore and onshore environments. • Latch assembly and elastomer gasket seals against water and dust ingress, IP66/67. • Easily accessed for maintenance using Allen key or straight blade screw driver. • Central opening with unique patented release system to prevent damage. • Hinged parabolic reflector for high lumen output efficiency. • Vibration resistant spring loaded lampholders for Bi-pin (G13) or mono-pin (Fa6) versions. • Electronic multi-tap ballast 110 to 254 Vac/Vdc +/- 10% 50/60 Hz, for global applications. High power factor electronic ballast (>0.95). EOL (End Of Life) protection in accordance to the latest EN/IEC 60079-7 standard. • Also available with electronic ballast 220/240 Vac/Vdc +/- 10% 50/60 Hz. High power factor electronic ballast (>0.95). EOL. • Available in 3 hours emergency version, including multi-tap ballast with built-in monthly self test. Test results through multi-color LED. Standard Material • • • • • Fiberglass reinforced polyester housing Polycarbonate lens Elastomer gasket Highly reflective white polycarbonate internal reflector Mounting accessories available in different materials such as gray painted aluminum, zinc plated steel, galvanized steel or 316 stainless steel Options • Silicone coating for added protection in H2S hydrogen sulfide environments. • Without safety switch. • Level gauge light fitting. • 316 stainless steel fixing inserts. 1100 2 x 36 W 2 x 18 W Certifications and Compliances • • • • • • • • • • • • • • Certification Type: FLd Zone 2 — Conforming to ATEX 94/9/CE: CE II 3 G — ATEX/IEC Protection: Ex nR II or Ex nA II — T Rating: T6 to T4 Zone 21 and 22 — Conforming to ATEX 94/9/CE: CE II 2 D, CE II 3 D — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: T167 °F/75 °C Ambient Temperature: -40 °F to 131 °F / -40 °C to 55 °C CE Declaration of Conformity: 50212/50225 ATEX Certificate: LCIE 03 ATEX 6072/6166 IECEx Certificate: IECEx LCI 04.0021 Other Certifications: GOST, Marine Listed UL 1598A Index of Protection (solid & liquid): IP66/67 Impact Resistance (shock): IK10 Ex Standards: EN / IEC 60079-15; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1; 60598-2-22 EMC Standards: EN / IEC 55015; 61547 Other Standards: EN / IEC 60529 (IP); 62262 (IK) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 - 21 & 22 Zone 2 - 21 & 22 II 3 GD and II 2 D ATEX / IECEx IP66/67 - IK10 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For FN Non-Metallic Fluorescent Lighting Fixtures FN B 1 18 BU P Wattage: 18 - 18 Watt 36 - 36 Watt 58 - 58 Watt 55 - 55 Watt 80 - 80 Watt Series: FN - FN Series Zone 2, 21 & 22 ATEX/IEC Certified Lamp Type: B - Bi-pin (G13) C - PL Compact Lamps (2G11) ② Number of Lamps: 1 - Single 2 - Double 3 - Three Lamps A C Cable Type: A - Armored M20 N - Unarmored M25 U - Unarmored M20 Voltage: BU - 110 to 254 Vac/Vdc 50/60 Hz BK - 220 to 240 Vac/Vdc 50/60 Hz Options: (Options must be listed alphabetically) C - Silicon Coating for Diffuser E - 3H Emergency (combined) - Battery 6 V - 4 Ah N - No Switch ③ X - 4 Entries ④ Lighting Mounting Version: P - Pole Mount ① S - Surface/Suspension Mount Standard Wiring T - Surface/Suspension Mount Through Wiring L - Surface/Suspension Mount Dual Loop in/out Through Wiring (single phase) Lighting: Enclosed and Gasketed — Area — Fluorescent ① Only 2 x 18 W and 2 x 36 W with M25 entry versions. ② Only 55 W and 80 W standard versions. ③ Only for standard versions. ④ Only for S, T and L mounting versions. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1101 FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 - 21 & 22 Zone 2 - 21 & 22 II 3 GD and II 2 D ATEX / IECEx IP66/67 - IK10 Standard Version Surface/Suspension Mounting and Standard Wiring Version Connection via 1 x 6 terminals. Capacity (flexible/solid): 0.006 in2/0.009 in2 / 4 mm2/6 mm2. Unarmored Version - Bi-pin (G13) Three M25 threaded entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide blanking plugs. Catalog Number FNB218BKSNN FNB218BUSNN FNB236BKSNN FNB236BUSNN FNB258BKSNN FNB258BUSNN Lighting Number Power Lamp Voltage Weight Volume of Lamps (W) Type (V) (lbs/kg) (in3/dm3) 2 18 G13 220/240 12.13/5.5 1971.07/32.3 2 18 G13 110/254 12.13/5.5 1971.07/32.3 2 36 G13 220/240 17.42/7.9 3307.49/54.2 2 36 G13 110/254 17.42/7.9 3307.49/54.2 2 58 G13 220/240 19.84/9 3966.54/65 2 58 G13 110/254 11 3966.54/65 Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry, supplied with two M20 polyamide plugs. Number of Lamps 2 2 2 2 2 2 Power (W) 18 18 36 36 58 58 Lamp Type G13 G13 G13 G13 G13 G13 Voltage (V) 220/240 110/254 220/240 110/254 220/240 110/254 Weight (lbs/kg) 12.13/5.5 12.13/5.5 17.42/7.9 17.42/7.9 19.84/9 24.25/11 Volume (in3/dm3) 1971.07/32.3 1971.07/32.3 3307.49/54.2 3307.49/54.2 3966.54/65 3966.54/65 Catalog Number FNB218BKSAN FNB218BUSAN FNB236BKSAN FNB236BUSAN FNB258BKSAN FNB258BUSAN Lighting: Enclosed and Gasketed — Area — Fluorescent Emergency Version Surface/Suspension Mounting and Standard Wiring Connection via 1 x 4 terminals for 18 W version. Connection via 1 x 8 terminals for 36 W & 58 W versions. Capacity (flexible/solid): 4 mm2/6 mm2. 18 W 36/58 W Unarmored Version - Bi-pin (G13) Three M25 entries, two at one end and one at opposite end, supplied with one M25 polyamide cable gland (dia. 0.31 to 0.73" / 8 to 18.5 mm) and two M25 polyamide blanking plugs. Number Power Lamp Voltage Weight Volume of Lamps (W) Type (V) (lbs/kg) (in3/dm3) 2 18 G13 110/254 16.09/7.3 1971.07/32.3 2 36 G13 110/254 21.16/9.6 3307.49/54.2 2 58 G13 110/254 23.59/10.7 3966.54/65 Armored Version - Bi-pin (G13) Two M20 threaded entries with brass earth continuity plate at one end and one M20 plugged clearance entry, supplied with two M20 polyamide plugs. Number of Lamps 2 2 2 1102 Power (W) 18 36 58 Lamp Type G13 G13 G13 Voltage (V) 110/254 110/254 110/254 Weight (lbs/kg) 16.09/7.3 21.16/9.6 23.59/10.7 Volume (in3/dm3) 1971.07/32.3 3307.49/54.2 3966.54/65 Duration (Hours) 3H 3H 3H Battery Capacity 4 Ah 4 Ah 4 Ah Catalog Number FNB218BUSNEN FNB236BUSNEN FNB258BUSNEN Duration (Hours) 3H 3H 3H Battery Capacity 4 Ah 4 Ah 4 Ah Catalog Number FNB218BUSAEN FNB236BUSAEN FNB258BUSAEN Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FN Series Heavy Duty Nonmetallic Fluorescent Luminaire Accessories Standard and Emergency Back-Up. Zone 2 - 21 & 22 Zone 2 - 21 & 22 II 3 GD and II 2 D ATEX / IECEx IP66/67 - IK10 Description Pack Catalog Number Fixing Brackets Set of two brackets for surface installation Zinc plated steel 1 FEFBZ 316 stainless steel 1 FEFBS Aluminum (gray painted) 1 FESBA 316 stainless steel 1 FESBS 1 FERBM8Z Brackets for Surface Mounting Set of two M8 Ring Bolts Set of two Zinc plated steel Half Clamps Brackets for Pole Mounting Set of two Dia. 1.65 to 1.93" / 42 to 49 mm pole (1.25 to 1.5" / 31.8 to 38.1 mm tube) 1 FEHC49Z 316 stainless steel 1 FEHC49S Zinc plated steel 1 FEHC60Z 316 stainless steel 1 FEHC60S 1 FEWMG Aluminum 1 FEHBA 316 stainless steel 1 FEHBS Lighting Zinc plated steel Dia. 2.36"/60 mm pole (2"/50.8mm tube) Lighting: Enclosed and Gasketed — Area — Fluorescent Wall Mounting Adaptor For pole mounting version (dia. 1.65"/42 mm) Galvanized steel Hinged Brackets Set of two brackets for adjusting luminaire Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1103 FN Series Heavy Duty Nonmetallic Fluorescent Luminaire Technical Data Standard and Emergency Back-Up. Zone 2 - 21 & 22 Zone 2 - 21 & 22 II 3 GD and II 2 D ATEX / IECEx IP66/67 - IK10 Wiring Diagram Emergency Function Diagram Two Lamp Version Mains PE N Mains L Lighting Switch Lighting Switch ON Lighting Switch OFF Lighting Switch ON Lighting Switch OFF ON L’ U N PE OFF Standard Fluorescent Lighting Fixture Three Lamp Version Mains U’ U N PE ON Emergency Fluorescent Lighting Fixture Lighting OFF LED Status Color Indication Green Lighting: Enclosed and Gasketed — Area — Fluorescent Function LED glows Batteries are connected LED blinks Batteries are charged Red LED blinks Batteries are not connected or defect Yellow LED blinks Batteries are charging and discharging during automatic cycle Dimensions Surface/Suspension Mounting 18 W 36 W 2 X MB 15.75"/ 400 mm 27.56"/ 700.0 mm 30.91"/785.0mm 2 X MB 54.72"/ 1390.0 mm 5.71"/ 145.0 mm 58 W 27.56"/ 700.0 mm 2 X MB 66.54"/ 1690.0 mm 8.54"/ 217.0 mm 1104 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FN Series Heavy Duty Nonmetallic Fluorescent Luminaire Photometric Data Standard and Emergency Back-Up. Zone 2 - 21 & 22 Longitudinal Transverse Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 2 x 18 W Efficiency 85.1% NF C 71-121: 0.78 H + 0.08 T 2 x 36 W Efficiency 80.5% NF C 71-121: 0.73 H + 0.07 T Candela Distribution Candela Distribution 0-180 90-270 0-180 90-270 0 195 195 0 185 5 195 194 5 185 10 192 192 90° 10 182 15 187 192 75° 15 20 181 193 25 173 194 60° 30 163 194 45° 35 152 193 40 138 45 124 50 108 182 55 91 176 60 73 163 65 55 70 37 Degrees 2 x 58 W Efficiency 76.9% NF C 71-121: 0.70 H + 0.07 T Candela Distribution 0-180 90-270 185 0 173 184 5 172 Degrees 173 173 Degrees 182 90° 10 170 171 90° 178 181 75° 15 166 169 75° 20 172 183 20 161 172 25 164 183 25 154 172 30 154 183 30 145 172 35 143 183 35 135 171 192 40 131 183 40 123 172 191 45 117 179 45 111 170 50 102 173 50 97 165 55 85 166 55 82 157 60 68 155 60 66 148 150 65 51 145 65 50 139 145 70 35 141 70 34 133 30° 0° 15° 60° 45° 30° 0° 15° 60° 45° 30° 0° 15° Lighting Lighting: Enclosed and Gasketed — Area — Fluorescent Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1105 RigMaster™ Metallic Fluorescent Luminaires For Hazardous and Adverse Locations Suitable for Use in Wet Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. Class I, Division 2, Groups A, B, C, D NEMA Type 4X Marine Type Electric Fixture Non-Recessed Outside Type (Salt Water) ①② Applications • Enclosed and gasketed fixtures for use where vapors, moisture, dirt or corrosive atmospheres are encountered. • For use in hazardous locations defined by the NEC as Class I, Division 2. Groups A, B, C & D; Marine Type Electric Fixture Non-Recessed Outside Type (Salt Water); UL1598A; and Type 4X. • For use in locations where a high degree of corrosion resistance is required. • For indoor/outdoor use where protection against dirt, water and moisture is necessary. • Typical applications include: — Oil drilling rigs — Marine loading terminals — Processing plants — Pipeline pumping stations — Water treatment plants — Lubrication pits RM2232BUSW Illustrated Feature Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Features • Choice of mountings: end brackets, swivel brackets and straight brackets. • Thick 1/8” clear acrylic lens protects against possible broken glass from lamps. • RigMaster fixtures are supplied with the following ballast options: — Class P low energy (E) ballasts, equipped with an automatic thermally-activated protective device. They offer protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application. — 220- and 240-volt options in both 50 and 60 Hz. • High-temperature nickel-cadmium battery has a life expectancy of 7 to 10 years. • Battery charger indicator light and test switch are mounted inside the enclosure and visible through the clear lens. • Heavy-duty telescoping lampholders. • Fixtures are shipped complete with lamps. • Swivel End Mount fixture comes standard with eyebolt on fixture end for connecting safety cable. • Swivel Center Mount and Straight Center Mount fixtures come standard with cast mounts on fixture end for connecting safety cable. Four plated steel latches on each side of door assure integrity of fixture for areas as classified. Certifications and Compliances • UL Standard: UL 1598, UL 844, UL 924 • UL Listed: E10794 Standard Materials • • • • • Reflector housings: extruded aluminum Door frame: 1/8” extruded aluminum Door clamps: heavy-duty plated spring steel Lampholders: white urea plastic Gasket: neoprene Options • Individually fused ballast: suffix –F. • Emergency battery pack: suffix –EL ①. • Emergency Battery Pack capability in moments of power interruption. Luminaire automatically switches to emergency mode, keeping one lamp illuminated for a minimum of 90 minutes. When AC power is restored, battery automatically recharges in 24 hours. Initial light output is 600-700 lumens. ① Fixtures with emergency ballast are not recommended where the ambient temperature may fall below 32 °F/0 °C for extended periods. ② Does not apply to fixtures with fusing. 1106 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RigMaster™ Metallic Fluorescent Luminaires For Hazardous and Adverse Locations Suitable for Use in Wet Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. Class I, Division 2, Groups A, B, C, D NEMA Type 4X Marine Type Electric Fixture Non-Recessed Outside Type (Salt Water) ①② Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For RigMaster Metallic Fluorescent Lighting Fixtures RM 2 2 Series: RM - RigMaster Metallic 40 12 SS Lamp Type: 32 - 32 W, T8 (Electronic) 40 - 40 W, (Electronic) 60 - 60 W, T12, HO 800 MA (48) ⑤ Hazardous Rating: Class I, Division 2 CB EL Mounting: CB- End SW- Swivel ST- Fixed Options: EL- Emergency Battery Pack ③ F- Fuse Voltage ④: 12 - 120 V (40 W, T12) 27 - 277 V (40 W, T12) BU - 120-277 V, 50/60 Hz (32 W, T8; 60 W, T12) Number of Lamps: 2 - Two Lamps Ballast Type: SS- Solid State (40W, T12, Electronic) Only Lamp Lighting Thermal Performance RigMaster Fixtures Quantity Watt Type Ambient Temp (°F/°C) “T” Numbers Hazardous Classification RM2232 2 32 265MA-RS 104/40 T-4 Class I, Division 2, Groups A, B, C, D RM2240 2 40 430MA-RS 104/40 T-4 Class I, Division 2, Groups A, B, C, D RM2260 2 60 800MA-HO 104/40 T-4 Class I, Division 2, Groups A, B, C, D ① Fixtures with emergency ballast are not recommended where the ambient temperature may fall below 32 °F/0 °C for extended periods. ② Does not apply to fixtures with fusing. ③ For 50 Hz with Emergency Battery Pack, consult factory for certification. ④ BU for 32 W, T8 and 60 W, T12 only. Voltage must be specified for 40 W, T12. ⑤ CW suffix not needed for 60 W since -20 °F/-28 °C starting provided as a standard. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1107 Lighting: Enclosed and Gasketed — Area — Fluorescent Fixture RigMaster™ Metallic Fluorescent Luminaires For Hazardous and Adverse Locations Suitable for Use in Wet Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. Class I, Division 2, Groups A, B, C, D NEMA Type 4X Marine Type Electric Fixture Non-Recessed Outside Type (Salt Water) ①② Swivel End Bracket Swivel Center Bracket Straight Center Bracket No. of Lamps ③ Lamp Wattage Lamp Type Volts Bracket Type Catalog Number 2 32 T8 120-277 V, 50/60 Hz end RM2232BUCB 2 40 T12 120 V, 60 Hz end RM224012SSCB 2 40 T12 277 V, 60 Hz end RM224027SSCB 2 60 T12 120-277 V, 50/60 Hz end RM2260BUCB 2 32 T8 120-277 V, 50/60 Hz swivel RM2232BUSW 2 40 T12 120 V, 60 Hz swivel RM224012SSSW 2 40 T12 277 V, 60 Hz swivel RM224027SSSW 2 60 T12 120-277 V, 50/60 Hz swivel RM2260BUSW 2 32 T8 120-277 V, 50/60 Hz straight RM2232BUST 2 40 T12 120 V, 60 Hz straight RM224012SSST 2 40 T12 277 V, 60 Hz straight RM224027SSST 2 60 T12 120-277 V, 50/60 Hz straight RM2260BUST Replacement Parts Lighting Description Catalog Number Lens Lens and Frame Assembly RIGLENS Straight Bracket RM3002SEM Angle Bracket RM3002AEM Swivel Bracket RMBMSW Back-Straight Bracket RMBMST 60 W Spring Loaded RM60SRS 60 W Fixed Replacement RM60FRS 32 W Replacement RM32RS Lighting: Enclosed and Gasketed — Area — Fluorescent Mounting Brackets Sockets Mounting Accessories — Safety Cable Galvanized Steel Cable Catalog Number Stainless Steel Cable Catalog Number 3 ft/0.9 m RMSC3GASL 3 ft/0.9 m RMSC3STSL 4 ft/1.2 m RMSC4GASL 4 ft/1.2 m RMSC4STSL Connecting Safety Cable Swivel Center Mount and Straight Center Mount fixture comes standard with cast mounts on fixture end for connecting safety cable. Swivel End Mount fixture comes standard with eyebolt on fixture end for connecting safety cable. ① Fixtures with emergency ballast are not recommended where the ambient temperature may fall below 32 °F/0 °C for extended periods. ② Does not apply to fixtures with fusing. ③ Fixtures shipped complete with lamps. 1108 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RigMaster™ Metallic Fluorescent Luminaire Dimensions For Hazardous and Adverse Locations Suitable for Use in Wet Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. End Bracket Mounting .8 01 .25 3 "/1 51 8.10"/ 205.7 mm mm m m .8 93 11 o C / " .0 C t 47 8.10"/205.7 mm 5.42"/137.7 mm Swivel Bracket Mounting 2.00"/50.8 mm "/ .50 m 12 m .5 7 31 Ø 0.28"/ 7.0 mm Lighting 9.75"/ 247.7 mm 10.35"/ 262.9 mm Lighting: Enclosed and Gasketed — Area — Fluorescent 17.6"/447.0 mm Straight Bracket Mounting / .0" 11 .4 mm 9 27 6.75"/ 171.5 mm Fixture Bracket Type Weight in Lbs/Kgs End 35/15.9 Swivel 35/15.9 Straight 35/15.9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1109 RigMaster™ Metallic Fluorescent Luminaire Photometrics For Hazardous and Adverse Locations Suitable for Use in Wet Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. CATALOG NUMBER: RM2232BU Candela Distribution 25 1106 1110 1109 1110 1106 512 Luminaire: Class I, Division 2 fluorescent fixture with glass lens (4 foot, T-8. 32 Watt) tested at 120 V Lamps: Two Phillips 32 W, 4-foot F32T8/TL741fluorescents Ballast: Advance T-8, 32 Watt, catalog number ICN-2P32-SC 50/60 Hz, Instant Start, 120-277 V Ambient Temperature: 24 °C/75 °F Mounting: With Bracket Based on: 2,850 Lumens per Lamp TOTAL LUMINAIRE EFFICIENCY = 57.6% 0.0 22.5 45.0 67.5 90.0 Flux 0 1234 1234 1234 1234 1234 5 1234 1228 1227 1228 1224 117 15 1183 1187 1185 1187 1183 335 35 984 990 996 990 984 620 45 813 823 830 823 813 634 CIE Type – Direct 55 612 619 614 619 612 550 Plane: 65 364 375 381 375 364 368 75 124 126 112 126 124 133 85 9 7 7 7 90 1 1 1 1 9 0 1132 1132 1132 1132 1132 Lighting 5 1124 1128 1126 1128 1124 107 Lighting: Enclosed and Gasketed — Area — Fluorescent % FIXT. 90˚ 0- 30 964 16.9 29.4 Spacing Criteria: 1.3 1.3 0- 40 1584 27.8 48.3 Shielding Angles: 1.0 0.0 0- 60 2767 48.6 84.3 0- 90 3281 57.6 100.0 90-180 0 0.0 0.0 0-180 3281 57.6 100.0 CATALOG NUMBER: RM2232BU 22.5 45.0 67.5 90.0 Flux 15 1085 1089 1090 1089 1085 308 25 1003 1010 1011 1010 1003 465 Luminaire: Class I, Division 2 fluorescent fixture with glass lens (4 foot, T-12. 34 Watt) tested at 120 V Lamps: 2 Philips 34 Watt (4 foot, T-12) F4OCW/RS/EW Ballast: Advance T-12, 34 Watt, catalog number REL-2S40-SC 50/60 Hz, Instant Start, 120 V Ambient Temperature: 24 °C/75 °F Mounting: With Bracket Based on: 2,650 Lumens per Lamp 35 882 889 888 889 882 555 45 726 730 726 730 726 561 CIE Type – Direct 55 535 535 533 535 535 477 Plane: 65 322 316 311 316 322 314 75 121 112 104 112 121 121 85 9 7 6 7 9 90 0 0 0 0 0 TOTAL LUMINAIRE EFFICIENCY = 55.1% ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP Spacing Criteria: % FIXT. 0˚ 90˚ 0- 30 880 16.6 30.1 1.2 1.2 0- 40 1435 27.1 49.2 11 Candela Distribution 0.0 ZONE LUMENS % LAMP 0˚ 12 Candela Distribution 0.0 ZONAL LUMEN SUMMARY 0- 60 2473 46.7 84.7 0- 90 2919 55.1 100.0 90-180 0 0.0 0.0 0-180 2919 55.1 100.0 CATALOG NUMBER: RM2260BU 22.5 45.0 67.5 90.0 Flux 25 1100 1108 1111 1108 1100 511 Luminaire: Class I, Division 2 fluorescent fixture with glass lens (4 foot, T-12. 60 Watt) tested Lamps: 2 Philips 60 Watt (4 foot, T-12) F48T12CWHO ALTO Ballast: Advance T-12, 60 Watt, catalog number VEL-2S110 Ambient Temperature: 24 °C/75 °F Mounting: With Bracket Based on: 4,050 Lumens per Lamp 35 TOTAL LUMINAIRE EFFICIENCY = 39.6% 0 1237 1237 1237 1237 1237 5 1227 1231 1229 1231 1227 117 15 1188 1194 1193 1194 1188 337 968 977 976 977 968 610 45 800 806 805 806 800 619 CIE Type – Direct 55 591 593 594 593 591 529 Plane: 65 351 352 351 352 351 347 Spacing Criteria: 75 122 116 106 116 122 127 85 10 8 6 8 10 90 0 0 0 0 0 1110 12 ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP 0˚ 90˚ 1.2 1.2 0- 30 965 11.9 % FIXT. 30.1 0- 40 1574 19.4 49.1 0- 60 2722 33.6 84.8 100.0 0- 90 3208 39.6 90-180 0 0.0 0.0 0-180 3208 39.6 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RigMaster™ 304 Stainless Steel Fluorescent Luminaires V CSA Certification Only. Enclosed and Gasketed. For Hazardous and Adverse Locations Suitable for use in Wet or Marine (Salt Water) Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III CSA Enclosure 3 Applications • Appleton Rigmaster is designed for the requirements of the oil drilling industry. • For use on seashore, offshore or land based drilling rigs. • Suitable for industrial applications requiring a highly corrosionresistant fluorescent fixture. • Approved for outdoor use. • Ideal for shipboard use. (Salt water environment). • For use in high vibration installations. • Can be installed to illuminate work areas, stairways and ladders, pumps and instrument panels, chemical plants and refineries or for shipboard deck lighting. Features Standard Materials • Fixture body, snap clips, hardware, lens frame: 304 stainless steel • Mounting brackets, CG connectors, reflector: copperfree (4/10 of 1% max.) aluminum Standard Finishes • All components have a natural finish Options • Emergency battery, operates lamps at 60% for 90 minutes during power outages, suffix -E. • Fabricated from 316 stainless steel, suffix -316. • 60 Watt high output ballast available (-20 °F/-29 °C starting temperature). • Lens: tempered glass, suffix -GN. Compliances • CSA Standard: C22.2 No. 250, C22.2 No. 137 • CSA Certified: 025428 2 4 Series: ARM - RigMaster Stainless Steel A BU GN Cable Entry Jacket Range: A - .312”to .437” B - .375” to .500” C - .500" to .625" Number of Lamps: 2 - Two Lamps Voltage: BU - 120-277 V 50/60 Hz A5 - 347 V 60 Hz Lamp Type: ① 32 - 32 W, T8 (Electronic) 40 - 40 W, T12 (Rapid Start) 60 - 60 W, T12 (High Output) Factory Installed Options: EL- Emergency Back-up Battery 316 - 316 Stainless Steel GN - Tempered Glass Lens ① Lamps not furnished with fixture. V CSA Certification Only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1111 Lighting: Enclosed and Gasketed — Area — Fluorescent Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For RigMaster Stainless Steel Fluorescent Lighting Fixtures — Bracket Mounted ARM Lighting • Corrosion-resistant durable seam welded 304 stainless steel construction. • Vibration resistant – spring loaded sockets hold lamps securely with maximum shock and vibration protection. • Positive seal lens assembly provides a secure gasketed seal around the lens. Lexan, impact resistant lens is standard. • CG series watertight cord connectors grip the cable securely at the point of entrance to prevent insulation wear and strain on connections made within the enclosure. CG connectors seal out oil, water and other harmful atmospheres containing moisture to keep the enclosure clean and dry. • Stainless steel snap action clips permit relamping without tools. Three clips serve as hinges allowing unobstructed access to the fixture interior. • The highly polished finished reflector has excellent light distribution and high efficiency. • Access to the ballast and wiring chamber is quick and easy, requiring the removal of two screws. • Rigmasters are provided with feed-thru wiring, eliminating the need for a junction box. RigMaster™ 304 Stainless Steel Fluorescent Luminaires V CSA Certification Only. Enclosed and Gasketed. For Hazardous and Adverse Locations Suitable for use in Wet or Marine (Salt Water) Locations. 32 W, 40 W and 60 W Two-Lamp Fixtures. Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III CSA Enclosure 3 No. of Lamps ① Lamp Wattage Lamp Type Volts Operating Amps Input Watts Cable Range Catalog Number 59 - 55 .312-.437 ARM232ABU Rapid Start — 48” — T8 — Minimum Starting Temperature 0 °F/-18 °C 2 32 T8 120-277 V 0.49 - 0.19 2 32 T8 347 V 0.21 62 .312-.437 ARM232AA5 2 32 T8 120-277 V 0.49 - 0.19 59 - 55 .375-.500 ARM232BBU 2 32 T8 347 V 0.21 62 .375-.500 ARM232BA5 2 32 T8 120-277 V 0.49 - 0.19 59 - 55 .500-.625 ARM232CBU 2 32 T8 347 V 0.21 62 .500-.625 ARM232CA5 Rapid Start — 48” — F48T12/CW — Minimum Starting Temperature -22 °F/-30 °C 2 40 T12 120-277 V 0.7 - 0.26 84 - 70 .312-.437 ARM240ABU 2 40 T12 347 V 0.28 96 .312-.437 ARM240AA5 2 40 T12 120-277 V 0.7 - 0.26 84 - 70 .375-.500 ARM240BBU 2 40 T12 347 V 0.28 96 .375-.500 ARM240BA5 2 40 T12 120-277 V 0.7 - 0.26 84 - 70 .500-.625 ARM240CBU 2 40 T12 347 V 0.28 96 .500-.625 ARM240CA5 122 - 108 .312-.437 ARM260ABU Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Rapid Start — 48” — 800 mA — F48T12/CW/HO — Minimum Starting Temperature -22 °F/-30 °C 2 60 T12 120-277 V 1.05 - 0.40 2 60 T12 347 V 0.45 144 .312-.437 ARM260AA5 2 60 T12 120-277 V 1.05 - 0.40 122 - 108 .375-.500 ARM260BBU 2 60 T12 347 V 0.45 144 .375-.500 ARM260BA5 2 60 T12 120-277 V 1.05 - 0.40 122 - 108 .500-.625 ARM260CBU 2 60 T12 347 V 0.45 144 .500-.625 ARM260CA5 Dimensions in Inches/Millimeters ① Lamps not furnished with fixture. V CSA Certification Only. 1112 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 VRS™ and DRS™ Fluorescent Luminaires Enclosed and Gasketed. Suitable for Use in Wet Locations 32 W, 40 W and 60 W Two- and Three-Lamp Fixtures. VRS: Class I, Division 2, Groups A, B, C, D DRS: Class II, Division 1 and 2, Groups F, G Class III Applications • VRS — Enclosed and gasketed fixtures for use where vapors, moisture, dirt or corrosive atmospheres are encountered. — Corrosion-resistant polyester powder coating protects against corrosive atmospheres. • DRS — Dust-ignitionproof fixtures for use where ignitable amounts of dust are present from handling such products as grain, flour, sugar, starch and textiles. — Suitable for use in Class II and III, Division 1, classified areas. — Corrosion-resistant finish prolongs fixture life and retains fixtures reflectivity longer. Features VRS Enclosed and Gasketed DRS Dust-Ignition Proof Illustrated Features Lighting Three plated steel latches on each side of door assure integrity of fixture for areas as classified. Lighting: Enclosed and Gasketed — Area — Fluorescent • Choice of mountings: pendant and feed thru are standard, angle bars for chain suspension, or angle brackets (up to 45°) for wall or ceiling mounting. • Thick 1/4” clear tempered glass lens protects against possible broken glass from lamps. • VRS and DRS fixtures are supplied with the following ballast options: — Class P low energy (E) ballasts, equipped with an automatic thermally activated protective device. They offer protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application • High-temperature nickel cadmium battery has a life expectancy of 7 to 10 years. • Battery charger indicator light and test switch are mounted inside the enclosure and visible through the clear lens. • Heavy duty telescoping lampholders. • Low operating cost provides more lumens per Watt than incandescent. • Easy cleaning one-piece, seamless welded construction virtually eliminates dust and moisture accumulation. Standard Materials • • • • • • Reflector housings: 20-gauge steel Door frame: 16 gauge steel with clear glass Door clamps: heavy-duty plated spring steel Suspension hubs: 1/2” die-cast aluminum Lampholders: white urea plastic Gaskets: VRS – neoprene; DRS – fiberglass Standard Finishes • Reflector housings: VRS – white polyester powder coating; DRS – white polyester powder coating • Door frame: zinc electroplate • Door clamps, suspension hubs and lampholders: natural finish Options • Individually fused ballast. Suffix -F. • Emergency battery pack, Suffix -EL ➊. • Emergency battery pack capability in moments of power interruption. Luminaire automatically switches to emergency mode, keeping one lamp illuminated for a minimum of 90 minutes. When AC power is restored, battery automatically recharges in 24 hours. Initial light output is 600-700 lumens. Pan mounted ballast and sockets with safety chain provide quick, safe maintenance. Certifications and Compliances • UL Standard: UL 1598, UL 844 • UL Listed: E10794 ➊ Fixtures with emergency ballast are not recommended where the ambient temperature may fall below 32 °F/0 °C for extended periods. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1113 VRS™ and DRS™ Fluorescent Luminaires Enclosed and Gasketed. Suitable for Use in Wet Locations 32 W, 40 W and 60 W Two- and Three-Lamp Fixtures. VRS: Class I, Division 2, Groups A, B, C, D DRS: Class II, Division 1 and 2, Groups F, G Class III Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For VRS And DRS Non-Metallic Fluorescent Lighting Fixtures VRS 2 40 Series: VRS - Vaportight DRS - Dust-Ignitionproof BU Lamp Type: 32 - 32 W,T8 (Electronic) 40 - 40 W, (Electronic) 60 - 60 W, T12, HO 800 MA (48) Number of Lamps 2 - 2 Lamps 3 - 3 Lamps EL Options: EL - Emergency Battery Pack F - Fuse Voltage: BU - 120-277 V, 50/60 Hz 347 - 347 V 60 Hz V Technical Data: Thermal Performance of VRS and DRS Fixtures Lighting: Enclosed and Gasketed — Area — Fluorescent Lighting Lamp Fixture Quantity Watt Type Ambient Temp °F/°C “T” Numbers Hazardous Classification VRS232 2 32 265MA-RS 104/40 T-4A Class I, Division 2, Groups A,B,C,D VRS332 3 32 265MA-RS 104/40 T-4A Class I, Division 2, Groups A,B,C,D VRS240 2 40 430MA-RS 104/40 T-4A Class I, Division 2, Groups A,B,C,D VRS340 3 40 430MA-RS 104/40 T-4A Class I, Division 2, Groups A,B,C,D VRS260 2 60 800MA-HO 77/25 T-3C Class I, Division 2, Groups A,B,C,D DRS232 2 32 265MA-RS 77/25 T-6 Class II, Division 1 & 2 Groups F,G DRS332 3 32 265MA-RS 77/25 T-6 Class II, Division 1 & 2 Groups F,G DRS240 2 40 430MA-RS 77/25 T-4 Class II, Division 1 & 2 Groups F,G DRS340 3 40 430MA-RS 77/25 T-6 Class II, Division 1 & 2 Groups F,G DRS260 2 60 800MA-HO 77/25 T-6 Class II, Division 1 & 2 Groups F,G Vaportight Adjustable Hanger or Aligner – Iron Outlet Plugs • Suitable for use in locations where equipment is exposed to the deteriorating effects of non-combustible atmospheres containing corrosive fumes, vapors, dust, smoke and/or moisture. • Range of adjustment is 45°. Two-piece ball type cast iron body; gasket sealed at the adjustable ball joint. Maximum overall length is 53-5/8 inches. Finish is baked white paint over electroplating. • These iron plugs are for closing tapped outlets in explosion-proof boxes. Plugs are electroplated and finished in baked aluminum paint. A socket head is provided for square wrenches. V CSA Certification Only. 1114 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 VRS™ and DRS™ Fluorescent Luminaires Enclosed and Gasketed. Suitable for Use in Wet Locations 32 W, 40 W and 60 W Two- and Three-Lamp Fixtures. VRS: Class I, Division 2, Groups A, B, C, D Number of Lamps ➋ Lamp Watts DRS: Class II, Division 1 and 2, Groups F, G Class III Lamp Type Unput Volts Freq. (Hz) Ballast Type Catalog Number VRS 32 W, 40 W and 60 W Fixtures Furnished with 1/4” Clear Tempered Glass Lens ➊ 2 32 T8 120-277 50/60 Electronic VRS232BU 2 40 T12 120-277 50/60 Electronic VRS240BU 2 60 T12 120-277 50/60 Electronic VRS260BU 3 32 T8 120-277 50/60 Electronic VRS332BU 3 40 T12 120-277 50/60 Electronic VRS340BU DRS 32 W, 40 W and 60 W Fixtures Furnished with 1/4” Clear Tempered Glass Lens 2 32 T8 120-277 50/60 Electronic DRS232BU 2 40 T12 120-277 50/60 Electronic DRS240BU 2 60 T12 120-277 50/60 Electronic DRS260BU 3 32 T8 120-277 50/60 Electronic DRS332BU 3 40 T12 120-277 50/60 Electronic DRS340BU Lighting Lighting: Enclosed and Gasketed — Area — Fluorescent OPTIONS: Add suffix -F for individually fused ballast. Add suffix -EL for emergency battery pack. (For 50Hz with -EL suffix, consult factory for certifications.) ➊ Consult factory for clear high-impact acrylic lens. UL Listed for Class I, Division 2, Groups. A, B, C, D; suitable for use in locations exposed to moisture or noncombustible gases. ➋ Lamps not furnished with fixture. ➌ Low temperature ballast (-20 °F/-29 °C starting) provided as standard. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1115 VRS™ and DRS™ Fluorescent Luminaires Enclosed and Gasketed. Suitable for Use in Wet Locations 32 W, 40 W and 60 W Two- and Three-Lamp Fixtures. Description Catalog Number 45° Adjustable Brackets Two “L-type” brackets with gaskets – adjustable to 45° in 5° increments for “custom” illumination spread. DRKHN Two “L-type” brackets with gaskets for wall or ceiling mounting – provides wide-spread illumination. DRAGN Two heavy-duty bars with holes for chain suspension of fixtures. DRCXN Lens and door frame VRSLENS Lens and door frame DRSLENS 32- and 40 Watt Fixed-end lampholder (Med. Bi-pin) VRSDRS40SS0C 32- and 40 Watt Plunger-end lampholder (Med. Bi-pin) VRSDRS40CS0C 60 Watt Fixed-end lampholder (High Output) VRSDRS60SS0C 60 Watt Plunger-end lampholder (High Output) VRSDRS60CS0C 45° Fixed Mounting Brackets Lighting Angle Bars Lighting: Enclosed and Gasketed — Area — Fluorescent Lens and Door Frame Sockets – Lampholders Plunger Type Fixed Type * Each lamp has a Fixed and Plunger Lampholder Hubs Side and Top suspension hubs 1116 VRSDRSHUB Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 VRS™ and DRS™ Fluorescent Luminaire Photometric Data Enclosed and Gasketed. Suitable for Use in Wet Locations 32 W, 40 W and 60 W Two- and Three-Lamp Fixtures. Zone Lumens Total Luminaire Efficiency = 73.5% 0-10 145.72 CIE Type – Direct 10-20 421.76 20-30 651.35 30-40 798.47 0-180 1.28 Coefficients of Utilization - Zonal Cavity Method 40-50 824.90 90-270 1.34 Effective Floor Cavity Reflectance 0.20 50-60 701.76 Diagonal 1.44 60-70 498.35 70-80 189.17 80-90 30.32 90-100 0.00 REPORT NUMBER: VRS232 Lamps: Two 32 W Fluorescent Vaportightproof Spacing Criteria Plane % Ceiling Rcc % Walls Zone 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 87 87 87 87 85 85 85 85 82 82 82 78 78 78 75 75 75 73 Zonal Lumen Summary 0-30 Rw 80 Lumens % Lamp % Fixture 1 81 77 74 72 79 76 73 71 73 70 68 70 68 66 67 66 64 63 1218.83 21.0 2 74 68 63 59 72 66 62 58 64 60 57 62 58 56 59 57 55 53 28.6 100-110 0.00 0-40 2017.30 34.8 47.3 3 67 60 54 49 65 59 53 49 56 52 48 54 51 47 53 49 46 45 110-120 0.00 0-60 3543.96 61.1 83.2 4 62 53 47 42 60 52 46 42 50 45 41 49 44 41 47 43 40 38 4261.81 73.5 100.0 5 57 47 41 36 55 47 41 36 45 40 36 44 39 35 42 38 35 33 0.0 6 52 43 36 32 51 42 36 31 41 35 31 39 35 31 38 34 31 29 120-130 0.00 0-90 130-140 0.00 90-120 0.00 0.0 0.00 90-130 0.00 0.0 0.0 7 48 39 32 28 47 38 32 28 37 32 28 36 31 27 35 31 27 26 0.00 90-150 0.00 0.0 0.0 8 45 35 29 25 44 35 29 25 34 28 25 33 28 25 32 28 24 23 0.00 0.0 0.0 9 42 32 26 22 41 32 26 22 31 26 22 30 26 22 30 25 22 21 4261.81 73.5 100.0 10 39 30 24 20 39 29 24 20 29 24 20 28 23 20 27 23 20 19 160-170 0.00 90-180 170-180 0.00 180-0 Zone Lumens Total Luminaire Efficiency = 70.1% 0-10 126.78 CIE Type – Direct 10-20 367.88 20-30 567.43 30-40 693.10 0-180 1.28 40-50 715.79 90-270 1.32 50-60 620.48 Diagonal 1.42 433.89 163.48 80-90 25.87 90-100 0.00 REPORT NUMBER: VRS240 Lamps: Two 40 W Fluorescent Vaportightproof Spacing Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 83 83 83 83 81 81 81 81 78 78 78 75 75 75 72 72 72 70 Zonal Lumen Summary 0-30 Rw 80 Lumens % Lamp % Fixture 1 77 74 71 69 75 72 70 67 69 67 65 67 65 63 64 63 61 60 1062.10 2 70 65 60 56 68 63 59 56 61 57 54 59 56 53 57 54 52 51 20.0 28.6 100-110 0.00 0-40 1755.20 33.1 47.3 3 64 57 52 47 62 56 51 47 54 49 46 52 48 45 50 47 44 43 110-120 0.00 0-60 3091.47 58.3 83.2 4 59 51 45 40 57 50 44 40 48 43 39 46 42 39 45 41 38 37 3714.71 70.1 100.0 5 54 45 39 35 53 44 39 34 43 38 34 42 37 34 40 36 33 32 0.00 0.0 0.0 6 50 41 35 30 49 40 34 30 39 34 30 38 33 29 37 32 29 28 120-130 0.00 0-90 130-140 0.00 90-120 140-150 0.00 90-130 0.00 0.0 0.0 7 46 37 31 27 45 36 31 27 35 30 26 34 30 26 33 29 26 25 150-160 0.00 90-150 0.00 0.0 0.0 8 43 34 28 24 42 33 28 24 32 27 23 31 27 23 31 26 23 22 160-170 0.00 90-180 170-180 0.00 180-0 0.00 0.0 0.0 9 40 31 25 21 39 30 25 21 30 25 21 29 24 21 28 24 21 20 3714.71 70.1 100.0 10 38 28 23 19 37 28 23 19 27 23 19 27 22 19 26 22 19 18 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1117 Lighting: Enclosed and Gasketed — Area — Fluorescent 60-70 70-80 Plane Lighting 140-150 150-160 DRS™ Fluorescent Luminaire Photometric Data Enclosed and Gasketed. Suitable for Use in Wet Locations 32 W, 40 W and 60 W Two- and Three-Lamp Fixtures. Lighting Zone Lumens Total Luminaire Efficiency = 73.5% 0-10 145.72 CIE Type – Direct 10-20 421.76 20-30 651.35 30-40 798.47 0-180 1.28 40-50 824.90 90-270 1.34 50-60 701.76 Diagonal 1.44 60-70 498.35 70-80 189.17 80-90 30.32 90-100 0.00 Spacing Criteria Plane Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 87 87 87 87 85 85 85 85 82 82 82 78 78 78 75 75 75 73 Zonal Lumen Summary 0-30 Rw 80 Lumens % Lamp % Fixture 1 81 77 74 72 79 76 73 71 73 70 68 70 68 66 67 66 64 63 1218.83 2 74 68 63 59 72 66 62 58 64 60 57 62 58 56 59 57 55 53 21.0 28.6 100-110 0.00 0-40 2017.30 34.8 47.3 3 67 60 54 49 65 59 53 49 56 52 48 54 51 47 53 49 46 45 110-120 0.00 0-60 3543.96 61.1 83.2 4 62 53 47 42 60 52 46 42 50 45 41 49 44 41 47 43 40 38 4261.81 73.5 100.0 5 57 47 41 36 55 47 41 36 45 40 36 44 39 35 42 38 35 33 0.00 0.0 0.0 6 52 43 36 32 51 42 36 31 41 35 31 39 35 31 38 34 31 29 120-130 0.00 0-90 130-140 0.00 90-120 140-150 0.00 90-130 0.00 0.0 0.0 7 48 39 32 28 47 38 32 28 37 32 28 36 31 27 35 31 27 26 150-160 0.00 90-150 0.00 0.0 0.0 8 45 35 29 25 44 35 29 25 34 28 25 33 28 25 32 28 24 23 160-170 0.00 90-180 170-180 0.00 180-0 Zone Lighting: Enclosed and Gasketed — Area — Fluorescent REPORT NUMBER: DRS232 Lamps: Two 32 W Fluorescent Dust-Ignitionproof 0.00 0.0 0.0 9 42 32 26 22 41 32 26 22 31 26 22 30 26 22 30 25 22 21 4261.81 73.5 100.0 10 39 30 24 20 39 29 24 20 29 24 20 28 23 20 27 23 20 19 Lumens Total Luminaire Efficiency = 70.1% 0-10 126.78 CIE Type – Direct 10-20 367.88 20-30 567.43 30-40 693.10 0-180 1.28 Coefficients of Utilization - Zonal Cavity Method 40-50 715.79 90-270 1.32 Effective Floor Cavity Reflectance 0.20 50-60 620.48 Diagonal 1.42 60-70 433.89 70-80 163.48 80-90 25.87 90-100 0.00 Plane REPORT NUMBER: DRS240 Lamps: Two 40 W Fluorescent Dust-Ignitionproof Spacing Criteria % Ceiling Rcc % Walls Rw Zone 70 50 30 10 0 0 83 83 83 83 81 81 81 81 78 78 78 75 75 75 72 72 72 70 Zonal Lumen Summary 0-30 80 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Lumens % Lamp % Fixture 1 77 74 71 69 75 72 70 67 69 67 65 67 65 63 64 63 61 60 1062.10 2 70 65 60 56 68 63 59 56 61 57 54 59 56 53 57 54 52 51 20.0 28.6 100-110 0.00 0-40 1755.20 33.1 47.3 3 64 57 52 47 62 56 51 47 54 49 46 52 48 45 50 47 44 43 110-120 0.00 0-60 3091.47 58.3 83.2 4 59 51 45 40 57 50 44 40 48 43 39 46 42 39 45 41 38 37 3714.71 70.1 100.0 5 54 45 39 35 53 44 39 34 43 38 34 42 37 34 40 36 33 32 0.00 0.0 0.0 6 50 41 35 30 49 40 34 30 39 34 30 38 33 29 37 32 29 28 120-130 0.00 0-90 130-140 0.00 90-120 140-150 0.00 90-130 0.00 0.0 0.0 7 46 37 31 27 45 36 31 27 35 30 26 34 30 26 33 29 26 25 150-160 0.00 90-150 0.00 0.0 0.0 8 43 34 28 24 42 33 28 24 32 27 23 31 27 23 31 26 23 22 160-170 0.00 90-180 170-180 0.00 180-0 1118 0.00 0.0 0.0 9 40 31 25 21 39 30 25 21 30 25 21 29 24 21 28 24 21 20 3714.71 70.1 100.0 10 38 28 23 19 37 28 23 19 27 23 19 27 22 19 26 22 19 18 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RE Series Recessed Fluorescent Luminaires Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Applications 4 x 18 W Surface Mounting Features Standard Materials • Housing and integral frame: one-piece, welded steel • Safety lens: 0.20"/5 mm thick tempered • Gasket: Silicone, 4 lips, completely sealed and contained in the fixture • Internal reflector: white polycarbonate multi-parabolic • Cable gland and blanking plug: polyamide Standard Finishes 2 x 36 W Recessed Certifications and Compliances • Gas: Zones 1 and 2 — Conforming to ATEX 94/9/CE: CE 0081 II2 G — ATEX/IEC Protection: Ex de IIC/ Ex demb IIC (emergency version) — T Rating: T6 to T4 (see T Ratings on following page) • Dust: Zone 22 — Conforming to ATEX 94/9/CE: CE 0081 II2 D — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: T167 °F /75 °C • Ambient Temperature: -4 °F/-20 °C Ta 131 °F/55 °C • CE Declaration of Conformity: 50276 • ATEX Certificate: LCIE 07 ATEX 6104 • IECEx Certificate: IECEx LCI 07.0019 • Index of Protection: IP66 • Impact of Resistance: IK09 or IK10 depending on version • Ex standards :EN / IEC 60079-0; 60079-1; 60079-7; 60079-18 61241-0; 61241-1 • Product standards: EN / IEC 60598-1; 60598-2-22 • EMC standards: EN / IEC 55015; 61547 • Other standards: EN / IEC 60529 (IP); 62262 (IK) • Housing and integral frame: white powder epoxy paint Options • 316L stainless steel housing and integral frame, natural finish. • Through wiring. • White powder epoxy painted steel reflector. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1119 Lighting • One-piece welded steel housing with integral frame to seal out contaminants. • Allows recessed mounting in permanent ceilings from 55 mm to 130 mm (2" to 5" approximately). • Frameless tempered (safety) 5 mm (1/4") thick lens. Lens secured to housing by internal metallic hinges and secured with captive 316L stainless steel screws, allowing for easy lamp replacement and fixture maintenance. • Positive safety switch and new Ex e battery with plug-in connector for safety and easy maintenance in hazardous locations. • Designed for ease of installation and maintenance. • Bi-pin G13 lampholder. • Also available as surface mounting version. • New ballast: — EOL (End Of Life) protection in accordance to the latest EN 60079-7 standard — Multi-tap 110 to 254 Vac/Vdc +/-10% 50/60 Hz — Two channel standard ballast (if one lamp fails the second lamp remains in operation) — Ex e plug-in connector for rapid and error free maintenance — Self test on 3 hours duration emergency version — High power factor electronic ballast (>0.95) • Cable entries: — Three clearance holes for M20 cable gland supplied with M20 polyamide cable gland (cable dia. 0.26 to 0.57" / 6.5 to 14.5 mm) and M20 polyamide blanking plug as below quantity: — One M6 earth stud. Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent • Designed for flush or surface mounting; most specifically clean room environments where a seamless smooth ceiling is mandatory. • Typical applications include: the food industry, chemical plants, pharmaceuticals and delicate electronic manufacturing such as the aerospace industry. • Ideal for rigorous corrosive environments, involving water, dust and extreme temperature variations. • Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. RE Series Recessed Fluorescent Luminaires Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For FL Non-Metallic Fluorescent Lighting Fixtures RE B 1 18 Lighting Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent Series: RE - RE Series BU L Options: E - 3H Emergency (combined) - Battery 6 V - 4 Ah E1 - 1 H 30 Emergency (combined) - Battery 6 V - 7 Ah E7 - 3H Emergency (combined) Battery 6 V - 7 Ah N - No switch ③ P - White painted steel internal reflector ① S - 316L Stainless steel housing) Wattage: 18 - 18 Watt 36 - 36 Watt 58 - 58 Watt Lamp Type: B - Bi-pin (G13) E Voltage: B3 - 100 to 130 Vac/Vdc 50/60 Hz BU - 110 to 254 Vac/Vdc 50/60 Hz BK - 220 to 240 Vac/Vdc 50/60 Hz Number of Lamps: 1 - Single 2 - Double 3 - Three Lamps 4 - Four Lamps Termination/Wiring: L - Loop In/Loop Out T - Through wired ② T Ratings Version Termination and Wiring Ambient Temperature Ceiling Position Wall Position 104 °F/ 122 °F/ 131 °F/ 104 °F/ 122 °F/ 131 °F/ 40 °C 50 °C 55 °C 40 °C 50 °C 55 °C 2 x 18 W ④ T6 T5 T5 T5 T5 T4 2 x 18 W Emergency ④ T5 T4 T4 T5 T5 T4 3 x 18 W T5 T4 T4 T4 T4 T4 4 x 18 W T5 T4 T4 T5 T4 T4 2 x 36 W ④ T5 T4 T4 T5 T4 T4 2 x 36 W Emergency ④ T5 T4 T4 T5 T4 T4 3 x 36 W T4 T4 T4 T4 T4 T4 4 x 36 W T5 T4 T4 T5 T4 T4 2 x 58 W ④ T4 T4 T4 T4 T4 T4 2 x 58 W Emergency ④ T4 T4 T4 T4 T4 T4 3 x 58 W T4 T4 T4 T4 T4 4 x 58 W T4 T4 T4 T4 T4 • Terminal capacity: 0.006 in2/4 mm2 (flexible) or 0.009in2/6 mm2 (solid). • Loop in/Loop out: One terminal block ⑤ — Standard version: 2 (L) + 2 (N) + 2 (PE) — Emergency version: 2 (LP) + 2 (L) + 2 (N) + 2 (PE) • Through wired: Two terminal blocks (one at each end) ⑤ — Standard version: 2 (L) + 2 (N) + 2 (PE) 1 (L) + 1 (N) + 1 (PE) — Emergency version: 2 (LP) + 2 (L) + 2 (N) + 2 (PE) 1 (LP) + 1 (L) + 1 (N) + 1 (PE) T4 Version Loop Cable Gland 1 Blanking Plug 1 Nickel Plated Brass Locknut 3 T4 Through 2 1 3 ① As standard for 18 W emergency version and 4 lamp version. ② T/W and Loop in/Loop out - 3 cores (single phase). ③ Only for standard versions. ④ T rating for single lamp version is the same as twin lamp version. ⑤ PE: Earth; N: Neutral. L: Live. LP: Permanent Live for emergency version. 1120 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RE Series Recessed Fluorescent Luminaires Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Recessed — 110/254 Vac/Vdc 50/60 Hz — Front access — White Painted Steel Housing Version Wiring Reflector Weight (lbs/kg) Volume (in3/dm3) Catalog Number Standard Version — Bi-pin Lamps (G13) Loop Polycarbonate 30.86/14 3905.52/64 REB218BUFL 2 x 18 W Through Polycarbonate 30.86/14 3905.52/64 REB218BUFT 4 x 18 W Loop White Painted Steel 46.30/21 5675.21/93 REB418BUFLP 4 x 18 W Through White Painted Steel 46.30/21 5675.21/93 REB418BUFTP 2 x 36 W Loop Polycarbonate 41.89/19 6590.56/108 REB236BUFL 2 x 36 W Through Polycarbonate 41.89/19 6590.56/108 REB236BUFT 4 x 36 W Loop White Painted Steel 63.93/29 9641.75/158 REB436BUFLP 4 x 36 W Through White Painted Steel 63.93/29 9641.75/158 REB436BUFTP 2 x 58 W Loop Polycarbonate 48.50/22 7933.09/130 REB258BUFL 2 x 58 W Through Polycarbonate 48.50/22 7933.09/130 REB258BUFT 4 x 58 W Loop White Painted Steel 70.55/32 11594.51/190 REB458BUFLP 4 x 58 W Through White Painted Steel 70.55/32 11594.51/190 REB458BUFTP 3 Hours Emergency Version — Bi-pin Lamps (G13) 2 x 18 W Loop Polycarbonate 30.86/14 3905.52/64 REB218BUFLEP 2 x 18 W Through Polycarbonate 30.86/14 3905.52/64 REB218BUFTEP 4 x 18 W Loop White Painted Steel 46.30/21 5675.21/93 REB418BUFLEP 4 x 18 W Through White Painted Steel 46.30/21 5675.21/93 REB418BUFTEP 2 x 36 W Loop Polycarbonate 41.89/19 6590.56/108 REB236BUFLE 2 x 36 W Through Polycarbonate 41.89/19 6590.56/108 REB236BUFTE 4 x 36 W Loop White Painted Steel 63.93/29 9641.75/158 REB436BUFLEP 4 x 36 W Through White Painted Steel 63.93/29 9641.75/158 REB436BUFTEP 2 x 58 W Loop Polycarbonate 48.50/22 7933.09/130 REB258BUFLE 2 x 58 W Through Polycarbonate 48.50/22 7933.09/130 REB258BUFTE 4 x 58 W Loop White Painted Steel 70.55/32 11594.51/190 REB458BUFLEP 4 x 58 W Through White Painted Steel 70.55/32 11594.51/190 REB458BUFTEP Lighting For non-recessed lighting, please replace letter “F” with letter “M” as per Catalog number logic. Example: REB218BUFL becomes REB218BUML. Accessories Description Weight (lbs/kg) Catalog Number Fixing Brackets - Set of four. Zinc plated steel 1.32/0.60 REFBST 316 stainless steel 1.32/0.60 REFBSS Ceiling Mounting Brackets - Set of two Zinc plated steel 4.41/2.00 RECMST 316 stainless steel 4.41/2.00 RECMSS Zinc plated steel 0.55/0.25 REEBST 316 stainless steel 0.55/0.25 REEBSS M8 Eye Bolts - Set of four Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent 2 x 18 W 1121 RE Series Recessed Fluorescent Luminaires Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Wiring Diagram Emergency Function Diagram Two Lamp Version Mains PE N L Mains Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent Lighting Switch Lighting Switch ON Lighting Switch OFF Lighting Switch ON Lighting Switch OFF ON L’ U N PE OFF Standard Fluorescent Lighting Fixture Three Lamp Version Mains ON U’ U N PE Emergency Fluorescent Lighting Fixture OFF LED Status Color Lighting Green Indication LED glows Function Batteries are connected LED blinks Batteries are charged Red LED blinks Batteries are not connected or defect Yellow LED blinks Batteries are charging and discharging during automatic cycle Emergency Light Duration Version Battery Capacity Duration Light Output 2 x 18 W 4 Ah – 6 V 3 hours 45% 4 Ah – 6 V 3 hours 15% 7 Ah – 6 V 3 hours 25% 4 Ah – 6 V 3 hours 9% 7 Ah – 6 V 3 hours 15% 2 x 36 W 2 x 58 W 1122 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RE Series Recessed Fluorescent Luminaire Dimensions Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Dimensions in Inches/Millimeters Recessed Surface Mounting A A C D 0.08”/ 2.0 mm 5.30”/ 134.5 mm 5.23”/ 132.5 mm Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent B B C D E E 4 x Ø 0.33”/8.5 mm F 4 x Ø 0.33”/8.5 mm F Ceiling Cut-out G H A B C D E F G H 32.52/826 12.60/320 10.63/270 30.55/776 15.35/390 7.24/184 30.94/786 11.02/280 18 W (4 lamps) 32.52/826 19.29/490 17.32/440 30.55/776 15.35/390 13.94/354 30.94/786 17.72/450 36 W (1, 2, 3 lamps) 56.54/1436 12.60/320 10.63/270 54.57/1386 39.37/1000 7.24/184 54.96/1396 11.02/280 36 W (4 lamps) 56.54/1436 19.29/490 17.32/440 54.57/1386 39.37/1000 13.94/354 54.96/1396 17.72/450 58 W (1, 2, 3 lamps) 68.35/1736 12.60/320 10.63/270 66.38/1686 51.18/1300 7.24/184 66.77/1696 11.02/280 58 W (4 lamps) 68.35/1736 19.29/490 17.32/440 66.38/1686 51.18/1300 13.94/354 66.77/1696 17.72/450 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1123 Lighting Versions 18 W (1, 2, 3 lamps) RE Series Recessed Fluorescent Luminaire Photometric Data Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Longitudinal Transverse Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 Lighting Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent 1 x 18 W Efficiency 67.1% NF C 71-121: 0.67 E 2 x 18 W Efficiency 62% NF C 71-121: 0.62 E 3 x 18 W Efficiency 61.2% NF C 71-121: 0.61 E Candela Distribution Candela Distribution 0-180 90-270 0-180 90-270 Candela Distribution 0-180 90-270 0 209 209 0 205 205 0 201 5 Degrees 208 208 5 Degrees 203 204 5 Degrees 201 200 201 10 205 208 90° 10 202 203 90° 10 197 201 90° 15 201 207 75° 15 197 202 75° 15 193 200 75° 20 194 205 20 191 201 60° 20 187 197 60° 25 186 203 25 182 201 25 179 195 30 176 201 30 173 200 30 169 192 35 164 197 35 161 192 35 158 189 40 151 192 40 148 183 40 145 181 45 136 185 45 133 177 45 131 170 50 120 177 50 117 173 50 115 155 55 102 164 55 99 168 55 98 132 60 83 141 60 80 168 60 80 107 65 63 115 65 61 163 65 61 80 70 43 77 70 41 154 70 41 53 60° 45° 30° 0° 15° 2 x 18 W Efficiency 60.5% NF C 71-121: 0.60 F 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 30° 0° 15° 45° 30° 0° 15° 4 x 18 W Efficiency 63.7% NF C 71-121: 0.63 E Candela Distribution 0-180 90-270 196Degrees 196 195 196 193 195 189 195 183 193 175 191 166 187 155 182 143 174 129 162 114 147 98 131 79 109 60 85 40 62 45° Candela Distribution 90° 75° 60° 45° 30° 0° 15° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 194 Degrees 194 193 194 191 195 186 195 181 193 173 192 164 190 153 185 141 179 128 171 113 160 96 146 78 127 60 106 40 82 90° 75° 60° 45° 30° 0° 15° 4 x 36 W Efficiency 61.5% NF C 71-121: 0.61 E Candela Distribution 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 1124 0-180 90-270 190 190 Degrees 289 190 287 190 183 189 177 188 170 186 162 182 151 178 139 172 126 163 111 152 96 138 78 121 60 102 42 80 90° 75° 60° 45° 30° 0° 15° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RE Series Recessed Fluorescent Luminaire Photometric Data Standard and Emergency Back-Up. Increased Safety Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66 - IK09/10 Longitudinal Transverse Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 1 x 36 W Efficiency 64.4% NF C 71-121: 0.64 E 2 x 36 W Efficiency 64.8% NF C 71-121: 0.64 E 3 x 36 W Efficiency 63.7% NF C 71-121: 0.63 F Candela Distribution 0-180 90-270 0-180 90-270 Candela Distribution 0-180 90-270 0 196 196 0 198 198 0 207 5 195Degrees 196 5 197Degrees 198 5 207Degrees 208 207 10 192 196 90° 10 194 198 90° 10 204 208 90° 15 188 194 15 190 197 75° 15 199 206 75° 20 182 192 75° 20 184 196 20 193 204 25 174 189 25 176 195 25 185 202 30 165 188 30 167 195 30 175 200 35 154 185 35 156 194 35 164 196 40 152 181 40 144 191 40 151 189 45 129 176 45 130 184 45 136 178 50 114 170 50 115 172 50 120 162 55 97 159 55 98 154 55 103 139 60 80 143 60 80 129 60 84 112 65 61 116 65 62 101 65 65 83 70 43 76 70 43 72 70 45 55 60° 45° 30° 0° 15° 1 x 58 W Efficiency 64.9% NF C 71-121: 0.65 E 45° 30° 0° 15° 2 x 58 W Efficiency 61.8% NF C 71-121: 0.62 E Candela Distribution 0-180 90-270 189 Degrees189 188 189 187 188 184 187 181 186 176 185 170 185 162 184 150 180 136 175 119 169 102 162 83 146 63 122 43 85 0-180 90-270 182 Degrees182 182 183 181 183 178 182 174 182 170 182 164 181 156 181 145 178 131 172 116 162 99 148 81 126 52 99 43 70 90° 75° 60° 45° 30° 0° 15° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 60° 45° 30° 0° 15° 3 x 58 W Efficiency 57.8% NF C 71-121: 0.58 E Candela Distribution 90° 75° 60° 45° 30° 0° 15° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 185 Degrees185 185 185 183 185 181 184 177 182 172 180 166 178 159 174 147 168 133 158 118 144 100 125 82 101 63 75 43 49 90° 75° 60° 45° 30° 0° 15° 1125 Lighting Candela Distribution 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 60° Lighting: Enclosed and Gasketed — Area — Recessed Fluorescent Candela Distribution Stylmaster™ Incandescent Luminaires Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X Applications • Enclosed and gasketed lighting fixtures for use in storage areas, tunnels, subways, chemical plants and other areas where moisture, dirt or corrosive atmospheres are a problem. • Suitable for use in wet locations. • Standard fixtures designed for 60 to 300 Watt medium base incandescent lamps. • Pendant, feed-thru, ceiling, stanchion and wall mounts available. • Ventilated steel reflectors with white porcelain finish are available for standard applications. Fiberglass reinforced polyester reflectors are designed for installations where fixture is subject to severe corrosive conditions or vandalism. Lighting: Enclosed and Gasketed — Area — Incandescent Features • Modern styling, with clean-line mounting hood and prismatic glass globe, plus optional guard. • Prismatic globe, furnished as standard, eliminates glare and distributes light evenly. • Globe seats firmly against composition gasket in mounting hood to keep out dirt and moisture. Full threads eliminate “cross threading.” • Fixture is complete with gaskets and socket. Socket is shockabsorbing to prolong lamp life and can be easily removed for wiring without tools. • Porcelain socket construction assures long trouble-free operation in high ambient installations. • Both porcelain steel and polyester reflectors are secured to mounting hoods with screws (furnished). • Guards have exclusive snap-on attachment feature for quick installation and fast servicing. • Choice of reflector styles: (1) steel reflector with white porcelain enamel in standard dome and 30º angle (2) fiberglass reinforced polyester reflector in standard dome and 30º angle. • Maximum input voltage 277 V (suitable for DC applications). Illustrated Features Mounting Hood Pendant style shown has setscrew to prevent fixture stem from turning. Other styles include stanchion, ceiling and wall mounting. Shock-Absorbing Medium Base Socket Spring absorbs vibration to prolong lamp life. Porcelain construction for trouble-free operation in high ambient installations. Globe Attractive, tapered prismatic glass globes for glare elimination and uniform light distribution. Colors available – also vandal-resistant plastic globes. Globe seats firmly against gasket to exclude moisture, dirt and vapors. Guard Snap-on guards (and reflectors) – simply snap-in and twist. Spring action balls snap into detents of fixture body. Standard Materials • • • • • Mounting hoods: copperfree (4/10 of 1% max.) aluminum Guards: pressure cast copperfree (4/10 of 1% max.) aluminum Reflectors: porcelain steel or fiberglass reinforced polyester Socket: porcelain with brass screw shell Globes: prismatic glass Guard and Reflectors Standard Finishes • • • • Mounting hoods and guards: epoxy powder coat Steel reflectors: baked white porcelain enamel Fiberglass reinforced polyester reflectors: natural finish Socket and globes: natural finish Lighting Options • To order fixture with other than standard clear glass globe, add suffix letters to catalog number as indicated in table, and adjust difference in price. Color Amber Blue Green Red Clear Heat-Resistant Glass Globe -AM -BL -GR -RE -HR Plastic Globe -PAM -PBL -PGR -PRE — Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 V CSA Certification only. 1126 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Stylmaster™ Incandescent Luminaire Thermal Suitability Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X Class I, Division 2, Groups A, B, C, D Fixture is suitable for Class I, Division 2 where the fixture operating temperature does not exceed the ignition temperature of the atmosphere in which fixture is installed. “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations Supply Wire: 392 ºF/200 ºC “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (˚ºC) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86-100 85 Class I, Division 2, Groups A, B, C, D VPGL-1HR (60-200 W) A-21 A-23 150 W 200 W A-23 200 W PS-25 200 W VPGL-2HR (200-300 W) PS-30 PS-25 200 W 300 W PS-30 300 W T3 T2D T2C T2C T2C T2C 325 325 Standard Dome T2D T2D T2B T2B T2B T2C 325 325 30º Angle T2D T2C T2B T2B T2B T2B 325 325 None Fixture Ambient Suitability: Class II, Groups E, F, G; Class III; Enclosure 4X Fixture Ambient Suitability: Areas ºF ºC Fixture Watts Non-Classified 392 200 A-23 60 to 300 Classified 104 40 PS-30 60 to 300 Lighting: Enclosed and Gasketed — Area — Incandescent Reflector A-21 100 W Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1127 Stylmaster™ Incandescent Luminaires Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. NEC: Class I, Division 2, Groups A, B, C, D Without Guard With Guard CSA: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X Type Lamp Watts NEC Catalog Numbers With Globe With and Guard Globe Only Hub Size (Inches) CSA Catalog Numbers V With Globe With and Guard Globe Only Pendant — 3/4” tapped opening — Furnished with 3/4” to 1/2” reducer A-23 60-200 1/2 or 3/4 VPA1075G VPA1075 VCA1075G VCA1075 PS-30 200-300 1/2 or 3/4 VPA2075G VPA2075 VCA2075G VCA2075 A-23 60-200 PS-30 200-300 1/2 VPX1050G VPX1050 3/4 VPX1075G VPX1075 1/2 VPX2050G VPX2050 3/4 VPX2075G VPX2075 — VCX1075G — VCX2075G — VCX1075 — VCX2075 Ceiling – Outlet Box Mounting — Fits SEH ➊ or VPJB cast outlet box, or 4” octagonal outlet box — Furnished with screws and gasket — Octagonal outlet boxes for non-classified areas only A-23 60-200 3/4 VPOB10G VPOB10 VCOB10G VCOB10 PS-30 200-300 3/4 VPOB20G VPOB20 VCOB20G VCOB20 A-23 60-200 1-1/4 VPAN10125G VPAN10125 VCAN10125G VCAN10125 PS-30 200-300 1-1/4 VPAN20125G VPAN20125 VCAN20125G VCAN20125 45˚ Stanchion – 1-1/4” Conduit Lighting Lighting: Enclosed and Gasketed — Area — Incandescent Ceiling – Five Tapped Openings — With mounting lugs and four close-up plugs ➊ Order SEH box from catalog Fittings Section, 4” octagonal steel boxes from the Commercial Products Section and VPJB cast box from this Section. V CSA Certification only. 1128 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Stylmaster™ Incandescent Luminaires Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X NEC Catalog Numbers CSA Catalog Numbers V With Globe With With Globe With Lamp Hub Size and Guard Globe Only and Guard Globe Only Without Guard With Guard Type Watts (Inches) Wall – Body includes outlet box with five tapped openings — With mounting lugs and four close-up plugs A-23 60-200 PS-30 200-300 1/2 VPWB1050G VPWB1050 3/4 VPWB1075G VPWB1075 1/2 VPWB2050G VPWB2050 3/4 VPWB2075G VPWB2075 VCWB1075G VCWB1075 VCWB2075G VCWB2075 Wall – Outlet Box Mounting — Fits SEH ➊ or VPJB cast outlet box, or 4” octagonal outlet box — Furnished with screws and gasket — Octagonal outlet boxes for non-classified areas only 60-200 VPOBW10G VPOBW10 VCOBW10G VCOBW10 PS-30 200-300 VPOBW20G VPOBW20 VCOBW20G VCOBW20 Wall – Outlet Box Mounting with Side Hubs — With two side hubs and one close-up plug A-23 60-200 3/4 — — VCW1075G VCW1075 PS-30 200-300 3/4 — — VCW2075G VCW2075 Lighting: Enclosed and Gasketed — Area — Incandescent A-23 Lighting ➊ Order SEH box from catalog Fittings Section, 4” octagonal steel boxes from the Commercial Products Section and VPJB cast box from this Section. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1129 Stylmaster™ Incandescent Luminaire Accessories Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. Hub Size (Inches) Description Catalog Numbers NEC CSA V Pendant Furnished with setscrew, 3/4” to 1/2” reducer for 1/2” stem, medium base socket. VPA75 VCA75 VPX50 VCX50 Ceiling – Five Tapped Openings 1/2 Four close-up plugs VCX75 3/4 Lighting: Enclosed and Gasketed — Area — Incandescent 45º Stanchion 1-1/4 VPAN125 VCAN125 1/2 VPWB50 — 3/4 VPWB75 — 1/2 VPJB50 VCJB50 3/4 VPJB75 VCJB75 VPOB1 VCOB1 VPOBW1 VCOBW1 Wall – Five Tapped Openings in Outlet Box ➊ Four close-up plugs Cast Outlet Box Only – Five Tapped Openings Four close-up plugs. No socket. Fits VPOB, VPOBW and VPWB. Ceiling – For Outlet Box (Octagonal outlet boxes for non-classified areas only) Fits SEH or VPJB cast outlet box, or 4” octagonal outlet box. With screws and gasket. Wall – For Outlet Box ➊ (Octagonal outlet boxes for non-classified areas only) Lighting Fits SEH or VPJB cast outlet box, or 4” octagonal outlet box. With screws and gasket. Wall – Outlet Box Mounting with Side Hubs — With two side hubs and one close-up plug (Octagonal outlet boxes for non-classified areas only) 3/4 — VCB75 ➊ Use 30º angle reflectors for wall installations – center line of fixture must be located at least 5-3/4” away from wall. Has four 3/16” dia. mounting holes located 90º apart on a 3-1/2” dia. center. V CSA Certification only. 1130 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Stylmaster™ Incandescent Luminaire Accessories Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. Catalog Numbers Type Lamp Watts Color Glass Polycarbonate VPGL-2PL Glass and Polycarbonate Globes ➊ A-23 Glass Globe (VPGL-1HR) Clear — Clear Heat-Resistant VPGL-1HR — Amber VPGL-1AM VPGL-2AMPL Blue VPGL-1BL VPGL-2BLPL Green VPGL-1GR VPGL-2GRPL Red VPGL-1RE VPGL-2REPL 60-200 Polycarbonate Globe (VPGL-2PL) Glass Globes — — VPGL-2HR — PS-30 Amber VPGL-2AM — Blue VPGL-2BL — Green VPGL-2GR — VPGL-2RE — VPGL-2HRT — Red Glass Globe (VPGL-2HR) Coated Tuff-Skin ® † Glass Globes Contains globe safely even if glass is broken Heat-Resistant VPGL-2HRT Type Lamp Watts A-23 PS-30 60-200 200-300 Catalog Numbers NEC CSA V VPGU-1 VPGU-2 VCFGU-1 VCFGU-2 VPLR-123 VCLR-1 VPGL-GK VCGL-GK Guards VPGU-1 VPGU-2 Lighting: Enclosed and Gasketed — Area — Incandescent Clear Clear Heat-Resistant 200-300 Replacement Porcelain Shock-Absorbing Sockets A-23 60-200 PS-30 200-300 Lighting Medium Base Replacement Gasket for Globes Neoprene – for all Stylmaster globes Globe Gasket † Registered trademark of Thomas Manufacturing Corporation, Parkton, Md. ➊ Shatter-resistant for use in food processing plants, canneries, dairies, breweries, bakeries or anywhere broken glass would prove a hazard. Ideally suited for areas where vandalism, high replacement and high maintenance costs are a problem. CAUTION: Use maximum 200 W lamp less reflector, 100 W max. with reflector or colored globe. Do not use in ambients exceeding 25 ºC/77 ºF. For burning in vertical base-up position only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1131 Stylmaster™ Incandescent Luminaire Reflectors and Accessory Weights Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. Catalog Number Description Porcelain Steel Polyester Standard Dome Reflector LPR-25ST LPRP-25ST 30º Angle Reflector LPR-25AN LPRP-25AN Typical Mounting Hoods Pendant VPA75 VCA75 lbs/kg 2/0.9 Ceiling VPX75 VCX75 lbs/kg 2/0.9 Wall VPOBW10 VCOBW10 lbs/kg 3/1.4 Stanchion lbs/kg VPAN-125 3/1.4 VCAN-125 Globes and Guards Reflectors Type Globe lbs/kg Guard lbs/kg Standard Dome lbs/kg 30˚º Angle lbs/kg 60-200 W VPGL-1 2/0.9 VPGU-1 1/0.5 LPR-25ST 3/1.4 LPR-25AN 2/0.9 200-300 W VPGL-2 3/1.4 VPGU-2 1/0.5 LPRP-25ST 2/0.9 LPRP-25AN 2/0.9 Lighting Lighting: Enclosed and Gasketed — Area — Incandescent Weights 1132 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Stylmaster™ Incandescent Luminaire Dimensions Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. Pendant Mount ➊ 45° Stanchion Mount ➊➋ 7.00"/ 177.8 mm 10.55"/268.0 mm 9.23"/ 234.4 mm 3.00"/ 76.2 mm Ceiling Outlet Box Mount Ceiling Mount for Junction Box 4.06"/ 103.1 mm 1.68"/ 42.7 mm † Wall Outlet Box Mount 5.25"/ 133.4 mm 3.50"/ 88.9 mm 4.00"/ 101.6 mm 3.31"/ 84.1 mm † 3.56"/ 90.4 mm † 10.63"/ 270.0 mm 0.19”/4.8 mm Dia. Mtg. Hole 3.31"/ 84.1 mm 8.75"/ 222.3 mm Junction Box Mounting Body 0.33"/8.4 mm R (+ DFT) (2 PLACES) 0.13"/3.3 mm R. Max (8 Places) 0.22"/5.6 mm R (+ DFT) (2 PLACES) 40 .1 1.88"/ 47.8 mm 6 1. 10 FT "/ .C D 50 B 3. m / 2" FT m 0" . .9 .6 ia "D 88 3 m D 0"/ +2 . m .0 ia / 4 D m 5" m m 4.7 7 m 0. 12 4 .4 91 m 1.5 m 8 Di "/ a. + 4.00"/ 101.6 mm DF T Lighting: Enclosed and Gasketed — Area — Incandescent 4.00"/ 101.6 mm Wall Mount with Junction Box 7.13"/ 181.1 mm 7.00"/ 177.8 mm 7.00"/ 177.8 mm 7.52"/ 191.0 mm 8.08"/ 205.2 mm 8.52"/ 216.4 mm 8.40"/ 213.4mm 6.08"/ 154.4 mm 5.96"/ 151.4 mm 3.00"/ 76.2 mm 6.88"/ 174.8 mm 6.52"/ 165.6 mm 12.08"/306.8 mm 11.19"/ 284.2 mm Lighting ➊ Height of hood is measured to bottom of flange. Height of globe and guard is from bottom of flange. ➋ Dimensions of angle are from center of pipe. Height is measured from pipe stop in stanchion hood. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1133 Stylmaster™ Incandescent Luminaire Dimensions Enclosed and Gasketed Attractively styled fixture with prismatic globe. UNILETS® for use with threaded metal conduit. Without Reflector Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .739 .689 .645 .684 .640 .598 .583 .548 .517 .489 .464 .439 .404 .384 .365 .322 ROOM CAVITY RATIOS 2 .618 .548 .489 .572 .509 .456 .484 .435 .391 .403 .365 .331 .329 .299 .273 .234 3 .527 .449 .386 .487 .416 .360 .411 .355 .308 .340 .297 .259 .275 .240 .210 .176 4 .460 .378 .316 .425 .351 .294 .358 .299 .253 .297 .250 .212 .239 .202 .172 .140 5 .398 .319 .258 .370 .296 .240 .313 .252 .206 .258 .209 .172 .208 .169 .138 .110 6 .353 .273 .216 .325 .253 .199 .274 .215 .170 .227 .178 .141 .183 .143 .112 .087 7 .312 .234 .181 .288 .216 .167 .242 .183 .141 .199 .152 .116 .161 .122 .092 .069 8 .279 .204 .152 .257 .189 .142 .217 .161 .120 .180 .133 .099 .144 .106 .077 .056 9 .251 .179 .130 .232 .166 .121 .196 .141 .102 .162 .116 .083 .130 .092 .065 .045 10 .226 .157 .112 .208 .146 .104 .177 .124 .087 .146 .102 .070 .118 .081 .054 .037 Standard Dome Effective Floor Cavity Reflectance (Rfc) is 20% % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .777 .747 .719 .759 .731 .706 .724 .701 .681 .693 .676 .658 .666 .650 .636 .620 ROOM CAVITY RATIOS 2 .679 .631 .589 .665 .620 .583 .636 .599 .566 .610 .580 .552 .587 .561 .537 .521 3 .593 .534 .486 .581 .525 .481 .557 .510 .471 .535 .495 .461 .514 .480 .451 .435 4 .523 .459 .409 .513 .453 .405 .492 .440 .398 .473 .428 .391 .456 .416 .384 .367 5 .459 .391 .340 .449 .385 .337 .433 .376 .334 .416 .366 .328 .401 .358 .323 .307 6 .406 .337 .289 .397 .333 .285 .382 .325 .282 .368 .317 .278 .356 .310 .274 .259 7 .359 .291 .246 .352 .287 .242 .339 .279 .238 .326 .274 .235 .316 .269 .232 .217 8 .323 .257 .211 .316 .254 .210 .305 .248 .208 .295 .243 .205 .284 .238 .203 .188 9 .291 .227 .182 .286 .223 .182 .275 .219 .180 .266 .214 .178 .257 .210 .175 .161 10 .262 .200 .159 .257 .199 .159 .249 .194 .157 .240 .290 .154 .234 .187 .152 .140 30° Angle Photometric data shown on this page is based on a 200 Watt A-23 lamp and is representative of the performance for all Stylmaster incandescent fixtures. For candlepower values of fixtures with other lamps, multiply the given candlepower values by the following multipliers: for 75 W A19 – 0.31; for 100 W A19 – 0.45; for 150 W A21 – 0.75; and for 300 W PS25 – 1.65. For candlepower values of fixtures with guard, multiply by 0.90. Lighting Lighting: Enclosed and Gasketed — Area — Incandescent % Ceiling Rcc 1134 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 V-51® Incandescent Luminaires Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Fixtures suitable for use in wet locations. ‡ NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Divisions 1 and 2, Groups E, F, G † Class III Enclosure 3R Applications • Enclosed and gasketed lighting fixtures for use in storage areas, tunnels, subways, chemical plants and other areas where moisture, dirt or corrosive atmospheres are a problem. • Suitable for use in wet locations. • Standard fixtures designed for 60 to 300 W medium base incandescent lamps. • Available in pendant, 45º stanchion, and a variety of ceiling and wall mountings. Features Illustrated Features Cut-Away View Connection block is easily removed (loosen two screws) to permit quick wiring. Mounting Hood Available in pendant (shown), ceiling, wall and 45º stanchion. Pendant has setscrew to prevent fixture from turning on stem. Neoprene Ring Neoprene attachment ring secures reflector to mounting hood – no tools needed. Globe Adapter When adapter is threaded onto mounting hood, the socket makes electrical contact with connection block in mounting hood. Available in malleable iron (VAD-1M and VAD-2M) or aluminum (VAD-1 and VAD-2). Porcelain Enamel Reflectors Standard and 30° angle. Standard Materials • Mounting hoods: malleable iron or copperfree (4/10 of 1% max.) aluminum • Globe adapters: malleable iron or pressure cast copperfree (4/10 of 1% max.) aluminum • Socket: porcelain with brass screw shell • Globes: glass. Optional globes in polycarbonate plastic 100 W Max • Guards: steel or pressure cast copperfree (4/10 of 1% max.) aluminum • Reflectors: porcelain enamel steel Guard Two sealed ball plunger units snap quickly, easily and securely into cavities of globe adapter. Guard can be used with or without a reflector. Standard Finishes • Malleable iron mounting hood and globe adapter: triple coat – (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • Aluminum mounting hood, adapter and guard: epoxy powder coat • Steel guard: zinc electroplate • Steel reflectors: white porcelain enamel • Socket and globes: natural finish Guard and Reflectors Lighting: Enclosed and Gasketed — Area — Incandescent • Furnished with connection block for easy wiring. • Unitized construction reduces installation and maintenance costs. • Shock-absorbing porcelain socket for longer lamp life. • Neoprene rubber ring in neck of reflector snaps into groove of mounting hood – protects against vibration and chipping. • Guard snaps into two recesses of adapter – no clamps or setscrews. • Available in three standard fixtures: (1) V-51 malleable iron mounting hood with aluminum adapter and guard (2) all malleable iron (steel guard) (3) all aluminum • Maximum input voltage 150 V. Options • To order fixture with other than standard clear glass globe, add suffix letters to catalog number as indicated in table, and adjust difference in price. Glass Globe -AM -BL -GR -RE -HR Plastic Globe -PAM -PBL -PGR -PRE — Lighting Color Amber Blue Green Red Clear Heat-Resistant Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 † 300 W PS-25 NOT approved for Class II, Division 1 and 2, Group G; Class III. ‡ With heat-resistant glass globes or plastic globes. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1135 V-51® Incandescent Luminaires Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Fixtures suitable for use in wet locations. ‡ NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Divisions 1 and 2, Groups E, F, G † Class III Enclosure 3R Class I, Division 2, Groups A, B, C, D Fixture is suitable for Class I, Division 2 where the fixture operating temperature does not exceed the ignition temperature of the atmosphere in which fixture is installed. “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations Supply Wire: 257 ºF/125 ºC “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (˚ºC) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86-100 85 Class I, Division 2, Groups A, B, C, D Reflector 200-300 W PS-25 150 W PS-30 200 W PS-30 300 W None T3 T2D T2C 325 Standard Dome T2D T2C T2B 325 30º Angle T2C T2C T2B 325 Fixture Ambient Suitability: Class I, Division 2, Groups A, B, C, D Fixture Ambient Suitability: Class II, Groups E, F, G; Class III; Enclosure 4X Areas ºF ºC Fixture Watts Non-Classified 167 Classified 104 75 A-23 60 to 300 40 PS-30 60 to 300 Lighting Lighting: Enclosed and Gasketed — Area — Incandescent 60-150 W A-21 100 W † 300 W PS-25 not approved for Class II, Division 1 and 2, Group G; Class III. ‡ With heat-resistant glass globes or plastic globes. V CSA Certification only. 1136 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 V-51® Incandescent Luminaires Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Fixtures suitable for use in wet locations. ‡ NEC: Class I, Division 2, Groups A, B, C, D Malleable Mounting Hood, Aluminum Adapter and Guard Malleable Mounting Hood, Adapter and Guard CSA: V Class I, Division 2, Groups A, B, C, D Class II, Divisions 1 and 2, Groups E, F, G † Class III Enclosure 3R Type Lamp Watts Size (Inches) Malleable Mounting Hood with Aluminum Guard Catalog Numbers ① All Malleable with Guard All Aluminum with Guard Pendant A-21 PS-30 60-150 150-300 1/2 VA1050G VA1050G-M VA1050G-A 3/4 VA1075G VA1075G-M VA1075G-A 1 VA1100G VA1100G-M — 1-1/4 VA1125G VA1125G-M 1/2 VA2050G VA2050G-M VA2050G-A 3/4 VA2075G VA2075G-M VA2075G-A 1 VA2100G VA2100G-M — 1-1/4 VA2125G VA2125G-M — 1/2 VXHA1050G VXHA1050G-M VXHA1050G-A 3/4 VXHA1075G VXHA1075G-M VXHA1075G-A 1 VXHA1100G VXHA1100G-M VXHA10100G-A 1/2 VXHA2050G VXHA2050G-M VXHA2050G-A 3/4 VXHA2075G VXHA2075G-M VXHA2075G-A 1 VXHA2100G VXHA2100G-M VXHA20100G-A — Ceiling — Five Tapped Openings — Four close-up plugs PS-30 60-150 150-300 Wall — JB Box Mounting ② — Fits JB cast outlet box ③ — Screws and gasket furnished with fixture A-21 60-150 PS-30 150-300 JBW10G JBW20G JBW10G-M JBW10G-A JBW20G-M JBW20G-A Lighting: Enclosed and Gasketed — Area — Incandescent A-21 Ceiling – JB Box Mounting ② — Fits JB cast outlet box ③ — Screws and gasket furnished with fixture 60-150 JB10G JB10G-M JB10G-A PS-30 150-300 JB20G JB20G-M JB20G-A Lighting A-21 † 300 W PS-25 not approved for Class II, Division 1 and 2, Group G; Class III. ‡ With heat-resistant glass globes or plastic globes. ① To order fixtures without guards, omit G suffix from catalog number. Order reflectors and accessories separately. ② 30º angle reflector adaptable for 100 W fixture only, when mounted at least 4.5”/114.3 mm from wall. ③ JB cast outlet box is available in the Fitting Section. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1137 V-51® Incandescent Luminaires Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Fixtures suitable for use in wet locations. ‡ NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Divisions 1 and 2, Groups E, F, G † Class III Enclosure 3R Type Lamp Watts A21 60-150 PS30 150-300 A21 60-150 PS30 150-300 Size (Inches) Catalog Numbers ① Malleable Mounting Hood Aluminum Mounting Hood with Aluminum Guard and Guard Feed-Thru 1/2 VC1050G VC1050G-A 3/4 VC1075G VC1075G-A 1/2 VC2050G VC2050G-A 3/4 VC2075G VC2075G-A 1/2 VT1050G — 3/4 VT1075G — 1/2 VT2050G — 3/4 VT2075G — Lighting: Enclosed and Gasketed — Area — Incandescent Ceiling – Three Hubs Outlet Box Mounting — For SEH cast outlet box ② or 3-1/4” or 4” octagonal outlet box ③ for non-classified areas only — Gasket and adapter plate furnished with fixture A21 60-150 OBV10G OBV10G-A PS30 150-300 OBV20G OBV20G-A A21 60-150 VX1050G — Ceiling – Four Hubs 150-300 3/4 VX1075G — 1/2 VX2050G — 3/4 VX2075G — Lighting PS30 1/2 † 300 W PS-25 not approved for Class II, Division 1 and 2, Group G; Class III. ‡ With heat-resistant glass globes or plastic globes. ① To order fixtures without guards, omit G suffix from catalog number. Order reflectors and accessories separately. ② SEH cast outlet box is available in the Fitting Section. ③ Octagonal outlet box is available in the Commercial Fitting Section. V CSA Certification only. 1138 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 V-51® Incandescent Luminaires Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Fixtures suitable for use in wet locations. ‡ NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Divisions 1 and 2, Groups E, F, G † Class III Enclosure 3R Type Lamp Watts A21 60-150 PS30 150-300 A21 60-150 PS30 150-300 A21 60-150 Size (Inches) Catalog Numbers ① Malleable Mounting Hood Aluminum Mounting Hood with Aluminum Guard and Guard Ceiling – Single Hub 1/2 V1050G V1050G-A 3/4 V1075G V1075G-A 1/2 V2050G V2050G-A 3/4 V2075G V2075G-A Wall – One Tapped Hub in Flange ② VGA1050G — 3/4 VGA1075G — 1/2 VGA2050G — 3/4 VGA2075G — 1/2 VD1050G — Lighting: Enclosed and Gasketed — Area — Incandescent 1/2 Wall – Vertical Feed-Thru ② PS30 150-300 3/4 VD1075G — 1/2 VD2050G — 3/4 VD2075G — 1/2 VGAT1050G — 3/4 VGAT1075G VGAT1075G-A 1/2 VGAT2050G — 3/4 VGAT2075G VGAT2075G-A Wall – Three Hubs Plus One Tapped Opening in Center of Flange ② 60-150 PS30 150-300 † 300 W PS-25 not approved for Class II, Division 1 and 2, Group G; Class III. ‡ With heat-resistant glass globes or plastic globes. ① To order fixtures without guards, omit G suffix from catalog number. Order reflectors and accessories separately. ② 30º angle reflector adaptable for 100 W fixture only, when mounted at least 4.5”/114.3 mm from wall. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1139 Lighting A21 V-51® Incandescent Luminaires Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Fixtures suitable for use in wet locations. ‡ NEC: Class I, Division 2, Groups A, B, C, D CSA: V Class I, Division 2, Groups A, B, C, D Class II, Divisions 1 and 2, Groups E, F, G † Class III Enclosure 3R Type Catalog Numbers ① Malleable Mounting Hood Aluminum Mounting Hood with Aluminum Guard and Guard Lamp Watts 45˚ Stanchion — Reflector not available for this fixture A21 60-150 1-1/4 — VMAN10125G-A PS30 150-300 1-1/4 — VMAN20125G-A A21 60-150 OBVW10G OBVW10G-A PS30 150-300 OBVW20G OBVW20G-A Ceiling – GS Form 20 Box Mounting — Fits GS cast outlet box ③ — Screws and gasket furnished with fixture A21 60-150 GS102G — PS30 150-300 GS202G — Wall – GS Box Mounting ② — Fits GSU cast outlet box ③ — Screws and gasket furnished with fixture A21 60-150 GSW102G — PS30 150-300 GSW202G — Lighting Lighting: Enclosed and Gasketed — Area — Incandescent Wall – Outlet Box Mounting ② — Fits VPJB outlet box, SEH cast outlet box ③ or 3-1/4” or 4” octagonal outlet box ④ for nonclassified areas only — Gasket and adapter plate furnished with fixture † 300 W PS-25 not approved for Class II, Division 1 and 2, Group G; Class III. ‡ With heat-resistant glass globes or plastic globes. ① To order fixtures without guards, omit G suffix from catalog number. Order reflectors and accessories separately. ② 30º angle reflector adaptable for 100 W fixture only, when mounted at least 4.5”/114.3 mm from wall. ③ Cast outlet boxes are available in the Fitting Section. ④ Octagonal outlet boxes are available in the Commercial Fitting Section. V CSA Certification only. 1140 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 V-51® Incandescent Luminaire Accessories Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Catalog Numbers Description Hub Size (Inches) Malleable Iron Aluminum Pendant and Ceiling Mounting Hoods — Furnished with connection block, gasket and screws Pendant Mounting 1/2 VA50 VA50-A 3/4 VA75 VA75-A 1 VA100 — 1-1/4 VA125 — Dead-End — Ceiling Mounting 1/2 V50 V50-A 3/4 V75 V75-A Feed-Thru — Ceiling Mounting 1/2 VC50 VC50-A 3/4 VC75 VC75-A Three Hubs — Ceiling Mounting VT50 — VT75 — Lighting: Enclosed and Gasketed — Area — Incandescent 1/2 3/4 Four Hubs — Ceiling Mounting 1/2 VX50 — 3/4 VX75 — Five Hubs — Ceiling Mounting ① 1/2 VXHA50 VXHA50-A 3/4 VXHA75 VXHA75-A 1 VXHA100 VXHA100-A Wall and Stanchion Mounting Hoods — Furnished with connection block, gasket and screws One Opening — Wall Mounting ② — 1 tapped hole in center of flange 1/2 VGA50 — 3/4 VGA75 — Feed-Thru — Wall Mounting ② — 2 tapped vertical feed-thru hubs 1/2 VD50 — 3/4 VD75 — Three Hubs and One Opening – Wall Mounting ② — 3 hubs plus 1 tapped opening in center of flange VGAT50 VGAT75 — Lighting 1/2 3/4 VGAT75-A 45° Stanchion Mounting 1-1/4 — VMAN-125 ① Four close-up plugs furnished. ② Mounting hoods for wall installations can only be used with 30º angle reflectors. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1141 V-51® Incandescent Luminaire Accessories Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Wall Ceiling Catalog Numbers Malleable Iron Aluminum Type Wall and Ceiling Outlet Box Mounting Hoods SEH ① and 3-1/4” or 4” Octagonal Outlet Box Mounting ② for Non-Classified Areas Only Wall ③ OBVW1 OBVW1-A Ceiling OBV1 OBV1-A GS Round Base Outlet Box Mounting – Form 20 ① Wall ③ GSW2 — Ceiling GS2 — Lighting: Enclosed and Gasketed — Area — Incandescent JB Round Base Outlet Box Mounting ① A21 PS30 Type Wall ③ JBW1 JBW1-A Ceiling JB1 JB1-A Catalog Numbers Malleable Iron Aluminum Lamp Watts Fixture Units Adapter/Socket, Globe and Guard A21 60-150 VU100M VU-100 PS30 150-300 VU200M VU-200 Adapter/Socket and Globe A21 60-150 VU100MLG VU-100LG PS30 150-300 VU200MLG VU-200LG Lighting Adapter/Socket A21 60-150 VAD-1M ④ VAD-1 PS30 150-300 VAD-2M ④ VAD-2 ① Cast outlet boxes and gaskets are available in the Fitting Section. Screws, gasket and adapter plate furnished with fixture mounting hood. ② Octagonal outlet boxes are available in the Commercial Fitting Section. Screws, gasket and adapter plate furnished with fixture mounting hood. ③ Mounting hoods for wall installations can only be used with 30º angle reflectors. ④ Accepts steel wire guard only 1142 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 V-51® Incandescent Luminaire Accessories Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Type Lamp Watts Catalog Numbers Glass — 60-150 W Polycarbonate ‑ 100 W Max. ① Glass and Polycarbonate Globes — 60-150 W 60 W-150 W Glass 100 W Polycarbonate Clear VGL-1CL VPG-1CL Amber VGL-1AM VPG-1AM Blue VGL-1BL VPG-1BL Green VGL-1GR VPG-1GR Opal VGL-1OP Red VGL-1RE Clear Heat-Resistant VGL-1HR — — VPG-1RE Glass Globes — 150-300W VGL-2CL — VGL-2AM — — Blue VGL-2BL Green VGL-2GR — Opal VGL-2OP — Red VGL-2RE — Clear Heat-Resistant VGL-2HR — Lighting: Enclosed and Gasketed — Area — Incandescent Clear Amber Aluminum Guards ② A21 ③ 60-150 VGU-1 PS30 ④ 150-300 VGU-2 A21 ⑤ 60-150 VWG-1 PS30 ⑥ 150-300 VWG-2 VGU-2 Steel Wire Guards ② Lighting VWG-1 ① Do not use in ambients exceeding 77 ºF/25º C. For burning in base-up position only. ② Cannot be used with polycarbonate globes. ③ Fits VAD-1 Adapter) ④ Fits VAD-2 Adapter) ⑤ Fits VAD-1M Adapter) ⑥ Fits VAD-2M Adapter) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1143 V-51® Incandescent Luminaire Accessories Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Description Type Lamp Watts Catalog Number Porcelain Reflectors — Furnished with neoprene attaching ring Standard Dome A21 60-150 VRW-1ST PS30 150-300 VRW-2ST A21 60-150 VRW-1AN PS30 150-300 VRW-2AN 30˚ Angle Lighting: Enclosed and Gasketed — Area — Incandescent Replacement Reflector Attaching Ring — Neoprene VPT-8 Connection Block VPT-7 Lamp Socket — Medium Base VPT-1AV Gasket for Lamp Socket and 60-150 W Globe VPT-2 Gasket for 150-300 W Globe Lighting VPT-3 Gasket for Mounting Hood VPT-4 1144 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 V-51® Incandescent Luminaire Dimensions Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Dimensions in Inches/Millimeters 5.19"/ 131.8 mm 3.81"/ 96.8mm 3.81"/ 96.8 mm 4.44"/ 112.8 mm Types V, VC, VT and VX Type VXHA 3.50"/ 88.9 mm 2.38"/ 60.5 mm 2.63"/ 66.8 mm 2.63"/ 66.8 mm 3.00"/ 76.2 mm 0.94"/ 23.9 mm Types OBV and OBVW 3.50"/ 12.7mm 4.50"/ 114.3 mm 4.00"/ 101.6 mm 4.00"/ 101.6 mm 3.06"/ 77.7 mm 3.50"/ 12.7mm 4.63"/ 117.6 mm 4.00"/ 101.6 mm 2.19"/ 55.6 mm 4.63"/ 117.6 mm 0.75"/ 19.1 mm Types VGA and VGAT Type VD Types JB and JBW Types GS and GSW Size A B C 1/2 & 3/4 D 1 & 1-1/4 D 60-150 W 6.38/162.1 5.75/146.1 4.19/106.4 2.63/66.8 2.89/73.4 150-300 W 9.50/241.3 8.63/219.2 5.69/144.5 2.63/66.8 2.89/73.4 Reflectors Lighting: Enclosed and Gasketed — Area — Incandescent 4.50"/ 114.3 mm 5.00"/ 127 mm 2.75"/ 69.9 mm 2.19"/ 55.6 mm Type VA 3.50"/ 12.7mm 5.00"/ 127 mm Lighting Standard Dome 30˚ Angle Standard Dome 30˚ Angle Size A B A B 60-150 W 6.19/157.2 12.00/304.8 8.09/205.5 10.00/254.0 150-300 W 8.88/225.6 16.00/406.4 11.59/294.4 12.00/304.8 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1145 V-51® Incandescent Luminaire Photometric Data Enclosed and Gasketed UNILETS® for use with threaded metal conduit. Full-size photometric data available for all V-51® fixtures on request. Without Reflector Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .815 .765 .721 .755 .711 .668 .642 .608 .577 .539 .513 .489 .444 .424 .406 .360 ROOM CAVITY RATIOS 2 .690 .619 .558 .639 .575 .521 .542 .492 .449 .452 .414 .380 .370 .341 .315 .273 3 .595 .515 .450 .551 .478 .421 .467 .410 .362 .388 .344 .307 .316 .282 .252 .215 4 .523 .439 .374 .485 .409 .350 .411 .351 .303 .343 .296 .257 .279 .242 .212 .178 5 .457 .376 .313 .426 .350 .292 .362 .300 .254 .302 .253 .215 .246 .208 .177 .147 6 .409 .326 .266 .378 .303 .248 .322 .261 .215 .269 .220 .183 .220 .180 .150 .123 7 .364 .283 .229 .338 .264 .213 .288 .226 .184 .240 .192 .155 .198 .158 .128 .104 8 .329 .251 .197 .305 .234 .185 .260 .202 .160 .220 .171 .136 .179 .141 .112 .090 9 .298 .223 .171 .277 .208 .161 .237 .180 .140 .199 .152 .119 .164 .126 .098 .078 10 .271 .198 .152 .251 .187 .142 .216 .161 .123 .182 .137 .104 .151 .113 .086 .068 Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .803 .772 .744 .784 .756 .731 .750 .726 .706 .718 .701 .683 .691 .675 .661 .645 ROOM CAVITY RATIOS 2 .705 .656 .614 .690 .645 .608 .661 .624 .591 .636 .605 .576 .612 .586 .562 .546 3 .618 .558 .511 .606 .550 .506 .583 .535 .495 .560 .520 .486 .540 .506 .476 .460 4 .549 .484 .434 .538 .478 .430 .518 .465 .423 .499 .454 .417 .482 .442 .410 .393 5 .485 .416 .366 .475 .411 .363 .459 .401 .359 .442 .392 .354 .427 .384 .349 .333 6 .431 .362 .314 .423 .358 .310 .408 .350 .307 .394 .343 .304 .382 .335 .299 .284 7 .384 .316 .270 .377 .311 .267 .364 .304 .263 .351 .299 .260 .341 .294 .257 .242 8 .347 .281 .234 .340 .278 .233 .329 .272 .231 .319 .267 .229 .309 .262 .226 .212 9 .314 .249 .204 .309 .246 .204 .299 .242 .202 .289 .237 .200 .281 .233 .198 .184 10 .284 .221 .181 .279 .221 .181 .271 .216 .179 .263 .212 .176 .257 .209 .174 .161 30° Angle Photometric data shown on this page is based on a 150 Watt PS-25 lamp and is representative of the performance for all V-51 incandescent fixtures. For candlepower values of fixtures with other lamps, multiply the given candlepower values by the following multipliers: for 60 W – A19 X 0.33; for 75 W – A19 X 0.45; for 100 W – A19 X 0.66; for 200 W – PS25 X 1.44; and for 300 W – PS30 X 2.32. For candlepower values of fixture with guard, multiply by 0.90. Lighting Lighting: Enclosed and Gasketed — Area — Incandescent Standard Dome 1146 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 REA™ 150 W Incandescent Luminaires ① Enclosed and Gasketed UNILETS® for use with Threaded Metal Conduit. Medium Base. Inexpensive, Low Wattage Fixture for use in Wet Locations. Applications • Vaportight enclosed and gasketed lighting fixtures, suitable for use in wet locations. • Standard glass globes take up to 150 W A-21 lamps. Optional polycarbonate plastic globes take up to 100 W A-21 lamps. Features • Inexpensive fixture designed for use without reflector. • Spring-mounted shock-absorbing socket prolongs lamp life. • Guards snap on easily and securely. Spring-action balls snap into detents in fixture body. Standard Materials • Mounting bodies: pressure cast copperfree (4/10 of 1% max.) aluminum • Socket: porcelain with brass screw shell • Guards: steel or aluminum guards Standard Finishes Pendant Mounting bodies: burnished Steel wire guard: zinc electroplate Aluminum guard: aluminum polymer enamel Socket and globes: natural finish Outlet Box Wall Lighting: Enclosed and Gasketed — Area — Incandescent • • • • Certifications and Compliances • UL Standard: UL 1598 Dimensions in Inches/Millimeters 3.19"/ 81.0 mm 3.50"/ 12.7 mm 4.19"/ 106.4 mm 8.25"/ 209.6 mm 11.81"/ 300.0 mm 6.38"/ 162.1 mm Lighting 3.94"/ 100.1 mm Pendant 3.75"/ 96.3 mm 3.94"/ 100.0 mm Outlet Box Wall ① Maximum size A-21 lamp: glass globe – 150 Watts; plastic globe – 100 Watts. No reflectors are available for REA fixtures. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1147 REA™ 150 W Incandescent Luminaires ① Enclosed and Gasketed UNILETS® for use with Threaded Metal Conduit. Medium Base. Inexpensive, Low Wattage Fixture for use in Wet Locations. Description Hub Size (Inches) Catalog Number 1/2 3/4 REA-1050 REA-1075 Pendant Fixture Pendant Outlet Box Outlet Box Fixture For 3-1/4” or 4” octagonal, or 4” square mounting. REA-10B Wall Fixture REA-10LB Wall Pendant Hood Lighting: Enclosed and Gasketed — Area — Incandescent 1/2 3/4 REA-50 REA-75 Wall Bracket 1/2 male stem REA-1BR Lamp Socket VPLR-123 Steel Guard VWG-1 For Outlet Box fixture only. Aluminum Guard For Pendant and Wall Mount fixtures only. VWG-1 VGU-1 VGU-1 Catalog Number ① Glass Plastic Description Lighting Colored Glass and Polycarbonate Globes Glass Plastic Clear VGL-1CL VPG-1CL Amber VGL-1AM VPG-1AM Blue VGL-1BL VPG-1BL Green VGL-1GR VPG-1GR Opal VGL-1OP — Red VGL-1RE VPG-1RE Clear Heat-Resistant VGL-1HR — ① Maximum size A-21 lamp: glass globe – 150 Watts; plastic globe – 100 Watts. No reflectors are available for REA fixtures. 1148 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations. NEC Class I, Division 2, Groups A, B, C, D Marine type electric fixtures, outside type (salt water) CEC V Class I, Division 2, Groups A, B, C, D Class II, Divisions I and 2, Groups E, F, G V Class III Marine type electric fixtures, outside type (salt water) Applications • Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for: — Facades — Amusement and recreational areas — Parking lots — Industrial and marine use Features • Ruggedly built for dependable, vandal resistant service. Attractively styled. Easy to install, aim, add service, with easy access to spacious interior. .• Integral ballast. • One-piece housing. • One-piece lens cover. Secured by four 1/4” dia. captive stainless steel slotted hex-head bolts. • Thermal shock and impact resistant glass lens. • Heavy duty, high temperature silicone rubber gasket, firmly seated. • Heavy duty mogul-base porcelain socket with heavy gauge brass, nickel-plated, double lamp-grip screw shell and springloaded center contact. • Parabolic finished aluminum reflector for optimum efficiency. • Mounting choice: (1) Yoke mount, zinc plated steel yoke with architectural bronze polyester finish (2) Pole mount, built-in slip-fitter, for internal wiring, adjustable laterally and vertically, slip fits 2” or 2-1/2” pipe, architectural bronze polyester finish Yoke Mount Standard Materials • Ballast housing and lens cover: copperfree (4/10 of 1% max.) aluminum • Gasket: silicone rubber • Socket: heavy duty porcelain with heavy gauge brass shell • Reflector: finished aluminum • Yoke mount: zinc plated steel • Bolts: stainless steel Pole Mount Lighting: Enclosed and Gasketed — Floodlight Standard Finishes • Ballast housing, lens cover, yoke and pole mount: architectural bronze polyester • Socket: nickel-plated Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10794 • CSA Certified: LR25428 Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1149 Areamaster™ 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS For general, marine and hazardous locations. NEC Class I, Division 2, Groups A, B, C, D Marine type electric fixtures, outside type (salt water) Yoke Mount Pole Mount Lamp Watts Lamp Type 70 HPS 120/208/240/277 G-AM271L-MT-I/2 G-AM271L-MT G-AM275L-MT 70 HPS 480 G-AM271L-48-I/2 G-AM271L-48 G-AM275L-48 100 HPS 120/208/240/277 G-AM371L-MT-I/2 G-AM371L-MT G-AM375L-MT 100 HPS 480 G-AM371L-48-I/2 G-AM371L-48 G-AM375L-48 150 HPS 120/208/240/277 G-AM471L-MT-I/2 G-AM471L-MT G-AM475L-MT 150 HPS 480 G-AM471L-48-I/2 G-AM471L-48 G-AM475L-48 Lighting Lighting: Enclosed and Gasketed — Floodlight Electrical Specifications Line Type of Starting Voltage Ballast Amps 70 Watt High Pressure Sodium 120 HX-HPR 0.90 208 HX-HPR 0.50 240 HX-HPR 0.44 277 HX-HPR 0.35 480 HX-HPR 0.21 100 Watt High Pressure Sodium 120 HX-HPR 1.30 208 HX-HPR 0.76 240 HX-HPR 0.66 277 HX-HPR 0.60 480 HX-HPR 0.33 150 Watt High Pressure Sodium 120 HX-HPR 2.00 208 HX-HPR 1.16 240 HX-HPR 1.00 277 HX-HPR 0.85 480 HX-HPR 0.50 Marine Yoke Mount ➊ for Class I, Division 2 Classified Duty Catalog Number Yoke Mount ➊ for General Duty Line Voltages Slip-Fit Mount ➋ T Numbers and Temperature Ratings of “Classified Duty” Operating Amps Total Watts 0.82 0.48 0.41 0.36 0.21 94 94 94 94 94 1.15 0.67 0.60 0.52 0.31 130 130 130 130 135 1.70 0.95 0.85 0.72 0.47 188 188 188 188 188 Lamp Watts 70 100 150 T Rating T3 T2C T2 Ambient Temperature (°F/°C) 104/40 104/40 104/40 T Rating Temperature Range (°F/°C) 358-392/181-200 421-446/216-230 538-572/281-300 ➊ Adjustable yoke mounts directly or with adapters. ➋ Internally wired, adjustable slip-fit mount for 2” or 2-1/2” pipe. 1150 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 100 Wide-Beam Floodlights V 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations. CEC V Class I, Division 2, Groups A, B, C, D Class II, Divisions I and 2, Groups E, F, G V Class III Marine type electric fixtures, outside type (salt water) Catalog Number Lamp Watts Yoke Mount Slip-Fit Lamp Type Marine Yoke Mount ➊ Class I, Division 2, Class II, Division 1 & 2 Class III Line Voltages Yoke Mount ➊ for General Duty Slip-Fit Mount ➋ Class I, Division 2 Slip-Fit Mount ➋ 70 HPS 120/208/240/277 G-AM271L-MT-I/2CN G-AM271L-MTCN G-AM275L-MT-I/2CN G-AM275L-MTCN 70 HPS G-AM271L-TT-I/2CN G-AM271L-TTCN G-AM275L-TT-I/2CN 100 HPS 120/208/240/277 G-AM371L-MT-I/2CN G-AM371L-MTCN G-AM375L-MT-I/2CN G-AM375L-MTCN 100 HPS G-AM371L-TT-I/2CN G-AM371L-TTCN G-AM375L-TT-I/2CN 150 HPS 120/208/240/277 G-AM471L-MT-I/2CN G-AM471L-MTCN G-AM475L-MT-I/2CN G-AM475L-MTCN 150 HPS G-AM471L-TT-I/2CN G-AM471L-TTCN G-AM475L-TT-I/2CN 120/277/347 120/277/347 120/277/347 G-AM275L-TTCN G-AM375L-TTCN G-AM475L-TTCN 70 PSMH 120/208/240/277 G-AM271H-MT-I/2CN G-AM271H-MTCN G-AM275H-MT-I/2CN G-AM275H-MTCN 70 PSMH G-AM271H-TT-I/2CN G-AM271H-TTCN G-AM275H-TT-I/2CN G-AM275H-TTCN 100 PSMH 120/208/240/277 G-AM371H-MT-I/2CN G-AM371H-MTCN G-AM375H-MT-I/2CN G-AM375H-MTCN 100 PSMH G-AM371H-TT-I/2CN G-AM371H-TTCN G-AM375H-TT-I/2CN G-AM375H-TTCN 150 PSMH 120/208/240/277 G-AM471H-MT-I/2CN G-AM471H-MTCN G-AM475H-MT-I/2CN G-AM475H-MTCN 150 PSMH G-AM471H-TT-I/2CN G-AM471H-TTCN G-AM475H-TT-I/2CN G-AM475H-TTCN 120/277/347 120/277/347 120/277/347 Operating Amps Total Watts 0.82 0.48 0.41 0.36 0.30 0.21 94 94 94 94 94 94 1.15 0.67 0.60 0.52 0.39 0.31 130 130 130 130 130 135 1.70 0.95 0.85 0.72 0.56 0.47 188 188 188 188 188 188 Line Type of Starting Voltage Ballast Amps 70 Watt Pulse Start Metal Halide 120 HX-HPF 0.80 208 HX-HPF 0.50 240 HX-HPF 0.43 277 HX-HPF 0.39 347 HX-HPF 0.20 480 HX-HPF 0.26 100 Watt Pulse Start Metal Halide 120 HX-HPF 1.20 208 HX-HPF 0.70 240 HX-HPF 0.61 277 HX-HPF 0.55 347 HX-HPF 0.40 480 HX-HPF 0.30 150 Watt Pulse Start Metal Halide 120 HX-HPF 1.75 208 HX-HPF 1.30 240 HX-HPF 0.85 277 HX-HPF 0.77 347 Super C.W.A. 0.65 480 Super C.W.A. 0.45 Operating Amps Total Watts 0.85 0.52 0.44 0.39 0.28 0.23 95 95 95 95 88 95 1.15 0.70 0.58 0.50 0.40 0.35 130 130 130 130 129 140 1.60 1.00 0.80 0.70 0.55 0.42 188 188 188 188 185 185 T Numbers and Temperature Ratings of “Classified Duty” Lamp Watts 70 100 150 T Rating T3 T2C T2 Ambient Temperature (°F/°C) 104/40 104/40 104/40 T Rating Temperature Range (°F/°C) 358-392/181-200 421-446/216-230 538-572/281-300 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting ➊ Adjustable yoke mounts directly or with adapters. ➋ Internally wired, adjustable slip-fit mount for 2” or 2-1/2” pipe. V CSA Certification only. Lighting: Enclosed and Gasketed — Floodlight Electrical Specifications Line Type of Starting Voltage Ballast Amps 70 Watt High Pressure Sodium 120 HX-HPR 0.90 208 HX-HPR 0.50 240 HX-HPR 0.44 277 HX-HPR 0.35 347 HX-HPF 0.30 480 HX-HPR 0.21 100 Watt High Pressure Sodium 120 HX-HPR 1.30 208 HX-HPR 0.76 240 HX-HPR 0.66 277 HX-HPR 0.60 347 HX-HPF 0.45 480 HX-HPR 0.33 150 Watt High Pressure Sodium 120 HX-HPR 2.00 208 HX-HPR 1.16 240 HX-HPR 1.00 277 HX-HPR 0.85 347 HX-HPF 0.52 480 HX-HPR 0.50 1151 Areamaster™ 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations. Mounting Fittings and Accessories Description Catalog Number G-AM-8-CA Pipe or Wall Mount Bracket — Used with G-AM-8-CA. Clamps to 1” to 2-1/2” pipe, vertical or horizontal, or mounts on flat surfaces. Includes U-bolt and crossarm bracket bolts. Malleable iron, zinc plated, chromate sealed, with architectural bronze polyester finish. G-AM-8-WB Poletop Slip-Fitter — 1-1/2” or 2” pipe size poletop tenons. Includes floodlight yoke bolt, 3 locking bolts, and cord grip. Body is malleable iron—zinc plated, chromate sealed, with cast aluminum cap. Assembly has architectural bronze polyester finish. G-SF20 Locking-Type Photocontrol Receptacle — For NEMA type photocontrol, with installation hardware and instructions. Should not be mounted on Class I Division 2 units. G-1PCR Vandal Shield — UV stabilized polycarbonate, with installation hardware and instructions. G-AM-2-VS Wire Guard — Mounts to lens door with screws furnished. Zinc plated. G-AM-2-G Top Visor — Easy to install with hardware supplied. Aluminum, with architectural bronze polyester finish. G-AM-2-V Lighting Lighting: Enclosed and Gasketed — Floodlight Crossarm Mounting Bracket — Has 180° horizontal adjustment—degree-marked. Facilitates mounting floodlight to crossarm or other flat surface, or to G-AM-8-WB. Includes floodlight yoke bolts. Malleable iron, zinc plated, chromate sealed, architectural bronze POLYESTER finish. 1152 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 100 Wide-Beam Floodlight Dimensions 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations. Yoke Mount Pipe or Wall Mount Bracket Wire Guard Lighting: Enclosed and Gasketed — Floodlight Crossarm Mounting Bracket Pole Mount Poletop Slip-Fitter Top Visor Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1153 Areamaster™ 100 Wide-Beam Floodlight Photometric Data 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations. Catalog Number G-AM471L-MT G-AM371L-MT G-AM271L-MT Lamp Photometric Data Watts Lumens Bulb Light Center Lgth. Base 150 16,000 E-23-1/2 Clear 5” Mogul Screw Watts Lumens Bulb Light Center Lgth. Base 100 9500 E-23-1/2 Clear 5” Mogul Screw Watts Lumens Bulb Light Center Lgth. Base 70 5800 E-23-1/2 Clear 5” Mogul Screw Total Footcandle Value ‡ 150 Watt High Pressure Sodium - Clear 16,000 Lumens Lighting: Enclosed and Gasketed — Floodlight 141° 115° 8148 50.9% 5155 8552 53.5% 141° 115° 4838 50.9% 3061 5062 53.3% 141° 113° 2982 51.4% 2025 3124 53.9% Footcandles for Iso-FTC Lines Ratio of Distance to Height 1.50 C 2.00 D 2.50 E Lamp Mounting Watts Height (Ft/M) 0.63 A 1.00 B 10/3.0 31.25 18.23 8.06 3.41 1.63 0.86 0.38 20/6.1 7.81 4.56 2.02 0.85 0.41 0.22 0.10 150 Lighting Horizontal Spread Vertical Spread Beam Lumens Beam Efficiency Max. CP. Total Lumens Total Efficiency Horizontal Spread Vertical Spread Beam Lumens Beam Efficiency Max. CP. Total Lumens Total Efficiency Horizontal Spread Vertical Spread Beam Lumens Beam Efficiency Max. CP. Total Lumens Total Efficiency 100 70 3.00 F 3.75 G 30/9.1 3.47 2.03 0.90 0.38 0.18 0.10 0.04 10/3.0 18.44 10.76 4.76 2.01 0.96 0.51 0.22 20/6.1 4.61 2.69 1.19 0.50 0.24 0.13 0.06 30/9.1 2.05 1.20 0.53 0.22 0.11 0.06 0.02 10/3.0 11.25 6.56 2.90 1.23 0.59 0.31 0.14 20/6.1 2.81 1.64 0.73 0.31 0.15 0.08 0.04 30/9.1 1.25 0.73 0.32 0.14 0.06 0.04 0.01 ‡ Photometric charts available upon request. * (i.e. ratio of distance to height. Example: @ 15'/4.6 m mounting height, 1 means 15'/4.6 m, 2 means 30'/9.1 m, etc.) 1154 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 250/400 Integrally Ballasted Floodlights 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH. 175 W, 250 W, 400 W MH V NEC: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nR, Groups IIA, IIB, IIC CEC V: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nR, Groups IIA, IIB, IIC Class II, Division 1 and 2, Groups E, F, G Class III NEC/CEC: IP66 Marine type electric fixtures, outside type (salt water) Applications • Powerful, efficient weatherproof lighting for medium and large areas such as: — Shopping malls — Parking lots — Sports areas — New-car lot lighting — Security lighting — Industrial process lighting Features • Compact in size, attractively styled contemporary design, rugged and dependable. • Easy to install and service. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • One-piece housing. • One-piece lens cover. Secured by four 1/4” Dia. captive stainless steel slotted hex-head bolts. • Thermal shock and impact resistant glass lens. • Heavy duty, high temperature silicone rubber gasket, firmly seated. • Heavy duty mogul-base porcelain socket with heavy gauge brass, nickel-plated, double lamp-grip screw shell and springloaded center contact. • Compound parabolic, double segment, finished aluminum reflector for optimum efficiency. • Mounting choice: (1) Yoke mount, zinc plated steel yoke with architectural bronze polyester finish (2) Pole mount, built-in slip-fitter, for internal wiring, adjustable laterally and vertically, slip fits 2” or 2-1/2” pipe, architectural bronze polyester finish • Cool operating temperatures translate into long luminaire life. Projected Area: 1.9 Sq. Ft. Dimensions in Inches/Millimeters Standard Materials Lighting: Enclosed and Gasketed — Floodlight • Ballast housing and lens door: copperfree (4/10 of 1% max.) aluminum • Gasket: silicone rubber • Socket: heavy duty porcelain with heavy gauge brass shell • Reflector: finished aluminum • Yoke mount: zinc plated steel • Bolts: stainless steel Standard Finishes • Ballast housing, lens cover, yoke and pole mount: architectural bronze polyester • Socket: nickel-plated Certifications and Compliances • • Areamaster 250/400 — UL Standard: UL 1598, UL 1598A, UL 844 — UL Listed: E10794 Zone 2 Areamaster 250/400 — UL Standard: UL 1598, UL 1598A, UL 60079-0, UL 60079-15 — UL Listed: E10794 Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1155 Areamaster™ 250/400 Integrally Ballasted Floodlights 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH. 175 W, 250 W, 400 W MH V NEC: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nR, Groups IIA, IIB, IIC NEC/CEC: IP66 Marine type electric fixtures, outside type (salt water) CEC V: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nR, Groups IIA, IIB, IIC Class II, Division 1 and 2, Groups E, F, G Class III “T” Numbers Lighting Lighting: Enclosed and Gasketed — Floodlight Lamp Watts Type 70 HPS 100 HPS 150 HPS 250 HPS 400 HPS 175 PSMH 200 PSMH 250 PSMH 320 PSMH 400 PSMH Supply Wire Temp. (°F/°C) 140/60 167/75 194/90 167/75 194/90 221/105 185/85 221/105 230/110 167/75 194/90 221/105 221/105 257/125 194/90 221/105 230/110 167/75 185/85 221/105 185/85 221/105 230/110 185/85 221/105 221/105 239/115 NEC/CEC Class I, Division 2, Groups A, B, C, D T3C T3B T3A T3 T2D T2C T2C T2B T2B 350 350 T1 T1 — T2 325 325 325 325 325 325 325 — 325 325 325 325 Ambient Temp. (°F/°C) 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 149/65 104/40 122/50 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 104/40 131/55 CEC V Class II, Division 1 and 2, Groups E, F, G T3B — — T3B — — T3B — — T3B — — T3B — T3B — — T3B — — T3B — — T3B — T3B — NEC/CEC Class I, Zone 2 T6 T5 T4 T5 T4 T4 T4 T4 T3 T4 T3 T3 T3 T3 T4 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 “T” Numbers Represent the Maximum Surface Temperature for Luminaries with AEx nA nR or AEx nR rating “T” Number T1 T2 T3 T4 T5 T6 Temp. Range (°F) 547-842 394-572 277-392 214-275 187-212 185 Temp. Range (°C) 301-450 201-300 136-200 101-135 86-100 85 V CSA Certification only. 1156 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 250/400 Integrally Ballasted Floodlights 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH NEC: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nR, Groups IIA, IIB, IIC IP66 Line Voltage Marine type electric fixtures, outside type (salt water) For Class 1, Division 2 Classified Duty and Marine Yoke Mount Catalog Number ➋➌ For General Duty Class I, Zone 2 Yoke Mounting Catalog Number ➌ Yoke Mount Catalog Number ➋ Slip-Fit Mount Catalog Number ➊➋ G-AML271L-MT-I/2 — — G-AML271L-MT-Z2 G-AML271L-225-I/2 ➎ — — G-AML271L-225-Z2 ➎ 480 G-AML271L-48-I/2 — — G-AML271L-48-Z2 120/208/240/277 G-AML371L-MT-I/2 — — G-AML371L-MT-Z2 Lamp High Pressure Sodium 120/208/240/277 70 W HPS ➍ 100 W HPS ➍ 150 W HPS ➍ 250 W HPS 400 W HPS 220 V 50 Hz 220 V 50 Hz G-AML371L-225-I/2 ➎ — — G-AML371L-225-Z2 ➎ 480 G-AML371L-48-I/2 — — G-AML371L-48-Z2 120/208/240/277 G-AML471L-MT-I/2 — — G-AML471L-MT-Z2 G-AML471L-225-I/2 ➎ — — G-AML471L-225-Z2 ➎ — G-AML471L-48-Z2 220 V 50 Hz 480 G-AML471L-48-I/2 120/208/240/277 G-AM671L-MT-I/2 G-AM671L-MT G-AM675L-MT G-AM671L-MT-Z2 230 V 50 Hz — G-AM671L-235-I/2 ➎ G-AM671L-235 ➎ G-AM675L-235 ➎ G-AM671L-235-Z2 ➏ 480 G-AM671L-48-I/2 G-AM671L-48 G-AM675L-48 G-AM671L-48-Z2 120/208/240/277 G-AM771L-MT-I/2 G-AM771L-MT G-AM775L-MT G-AM771L-MT-Z2 G-AM771L-235-I/2 ➏ G-AM771L-235 ➏ G-AM775L-235 ➏ G-AM771L-235-Z2 ➏ 480 G-AM771L-48-I/2 G-AM771L-48 G-AM775L-48 G-AM771L-48-Z2 120/208/240/277 G-AM571P-MT-I/2 G-AM571P-MT G-AM575P-MT G-AM571P-MT-Z2 480 230 V 50 Hz Pulse Start Metal Halide 175 W PSMH 200 W PSMH G-AM571P-48 G-AM575P-48 G-AM571P-48-Z2 G-AM2071P-MT-I/2 G-AM2071P-MT G-AM2075P-MT G-AM2071P-MT-Z2 480 G-AM2071P-48-I/2 G-AM2071P-48 G-AM2075P-48 G-AM2071P-48-Z2 120/208/240/277 G-AM671P-MT-I/2 G-AM671P-MT G-AM675P-MT G-AM671P-MT-Z2 G-AM671P-235-I/2 ➏ G-AM671P-235 ➏ G-AM675P-235 ➏ G-AM671P-235-Z2 ➏ G-AM671P-48-I/2 G-AM671P-48 G-AM675P-48 G-AM671P-48-Z2 G-AM3271P-MT-I/2 G-AM3271P-MT 230 V 50 Hz 480 G-AM3275P-MT G-AM3271P-MT-Z2 G-AM3271P-235-I/2 ➏ G-AM3271P-235 ➏ G-AM3275P-235 ➏ G-AM3271P-235-Z2 ➏ 480 G-AM3271P-48-I/2 G-AM3271P-48 G-AM3275P-48 G-AM3271P-48-Z2 120/208/240/277 G-AM771P-MT-I/2 G-AM771P-MT G-AM775P-MT G-AM771P-MT-Z2 G-AM771P-235-I/2 ➏ G-AM771P-235 ➏ G-AM775P-235 ➏ G-AM771P-235-Z2 ➏ G-AM771P-48-I/2 G-AM771P-48 G-AM775P-48 G-AM771P-48-Z2 120/208/240/277 320 W PSMH 400 W PSMH 230 V 50 Hz 230 V 50 Hz 480 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1157 Lighting ➊ Slip-fits 2” or 2-1/2” pipe-size tenons. ➋ Add suffix -E to catalog number if provision for quartz emergency option is desired. Furnished with socket installed and pre-wired. ➌ Quartz emergency option NOT available for Class I, Division 2 or Class I, Zone 2 fixtures. Classified duty floodlights have 1/2” N.P.T tapped hub for power entry. Use 221 °F/105 °C supply wire. ➍ For Hot Restrike Option, add suffix –R. ➎ For 120 V 50 Hz change -225 to -125, or for 240 V 50 Hz change -225 to -245. ➏ For 120 V 50 Hz change -235 to -125. Lighting: Enclosed and Gasketed — Floodlight 250 W PSMH G-AM571P-48-I/2 120/208/240/277 Areamaster™ 250/400 Integrally Ballasted Floodlights V 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH; 175 W, 250 W, 400 W MH CEC V: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nR, Groups IIA, IIB, IIC Class II, Division 1 and 2, Groups E, F, G Class III Line Voltage Lamp High Pressure Sodium 120/277/347 70 W HPS ➍ 100 W HPS ➍ 150 W HPS ➍ 250 W HPS 400 W HPS Lighting Lighting: Enclosed and Gasketed — Floodlight 400 W PSMH For Class 1, Division 2 Classified Duty and Marine Yoke Mount Catalog Number ➋➌ For General Duty Yoke Mount Catalog Number ➋ Slip-Fit Mount Catalog Number ➊➋ Class I, Zone 2 Yoke Mounting Catalog Number ➌ G-AML271L-TT-I/2 — — G-AML271L-TT-Z2 220 V 50 Hz G-AML271L-225-I/2 ➎ — — G-AML271L-225-Z2 ➎ 600 ➐ 120/277/347 G-AML271L-C7-I/2 — — G-AML271L-C7-Z2 G-AML371L-TT-I/2 — — G-AML371L-TT-Z2 220 V 50 Hz G-AML371L-225-I/2 ➎ — — G-AML371L-225-Z2 ➎ 600 ➐ 120/277/347 G-AML371L-C7-I/2 — — G-AML371L-C7-Z2 G-AML471L-TT-I/2 — — G-AML471L-TT-Z2 220 V 50 Hz G-AML471L-225-I/2 ➎ — — G-AML471L-225-Z2 ➎ 600 ➐ 120/277/347 G-AML471L-C7-I/2 — — G-AML471L-C7-Z2 G-AM671L-TT-I/2 G-AM671L-TT G-AM675L-TT G-AM671L-TT-Z2 230 V 50 Hz G-AM671L-235-I/2 ➎ G-AM671L-235 ➎ G-AM675L-235 ➎ G-AM671L-235-Z2 ➏ 600 ➐ 120/277/347 G-AM671L-C7-I/2 G-AM671L-C7 G-AM675L-C7 G-AM671L-C7-Z2 G-AM771L-TT-I/2 G-AM771L-TT G-AM775L-TT G-AM771L-TT-Z2 230 V 50 Hz G-AM771L-235-I/2 ➏ G-AM771L-235 ➏ G-AM775L-235 ➏ G-AM771L-235-Z2 ➏ G-AM771L-C7-I/2 G-AM771L-C7 G-AM775L-C7 G-AM771L-C7-Z2 G-AM571P-TT-I/2 G-AM2071P-TT-I/2 G-AM671P-TT-I/2 G-AM571P-TT G-AM2071P-TT G-AM671P-TT G-AM575P-TT G-AM2075P-TT G-AM675P-TT G-AM571P-TT-Z2 G-AM2071P-TT-Z2 G-AM671P-TT-Z2 G-AM671P-235-I/2 ➏ G-AM3271P-TT-I/2 G-AM671P-235 ➏ G-AM3271P-TT G-AM675P-235 ➏ G-AM3275P-TT G-AM671P-235-Z2 ➏ G-AM3271P-TT-Z2 600 ➐ Pulse Start Metal Halide 175 W PSMH 120/277/347 200 W PSMH 120/277/347 120/277/347 250 W PSMH 230 V 50 Hz 320 W PSMH IP66 Marine type electric fixtures, outside type (salt water) 120/277/347 230 V 50 Hz 120/277/347 G-AM3271P-235-I/2 ➏ G-AM3271P-235 ➏ G-AM771P-TT-I/2 G-AM771P-TT G-AM3275P-235 ➏ G-AM775P-TT G-AM3271P-235-Z2 ➏ G-AM771P-TT-Z2 230 V 50 Hz G-AM771P-235-I/2 ➏ G-AM771P-235 ➏ G-AM775P-235 ➏ G-AM771P-235-Z2 ➏ 120/277/347 G-AM571H-TT-I/2 G-AM571H-TT G-AM575H-TT G-AM571H-TT-Z2 220 V 50 Hz Metal Halide 175 W MH 250 W MH 400 W MH G-AM571H-225-I/2 ➎ G-AM571H-225 ➎ G-AM575H-225 ➎ G-AM571H-225-Z2 ➎ 600 ➐ G-AM571H-C7-I/2 G-AM571H-C7 G-AM575H-C7 G-AM571H-C7-Z2 120/277/347 G-AM671H-TT-I/2 G-AM671H-TT G-AM675H-TT G-AM671H-TT-Z2 220 V 50 Hz G-AM671H-225-I/2 ➎ G-AM671H-225 ➎ G-AM675H-225 ➎ G-AM671H-225-Z2 ➎ 600 ➐ G-AM671H-C7-I/2 G-AM671H-C7 G-AM675H-C7 G-AM671H-C7-Z2 120/277/347 G-AM771H-TT-I/2 G-AM771H-TT G-AM775H-TT G-AM771H-TT-Z2 220 V 50 Hz G-AM771H-225-I/2 ➎ G-AM771H-225 ➎ G-AM775H-225 ➎ G-AM771H-225-Z2 ➎ G-AM771H-C7-I/2 G-AM771H-C7 G-AM775H-C7 G-AM771H-C7-Z2 600 ➐ ➊ Slip-fits 2” or 2-1/2” pipe-size tenons. ➋ Add suffix -E to catalog number if provision for quartz emergency option is desired. Furnished with socket installed and pre-wired. ➌ Quartz emergency option NOT available for Class I, Division 2 or Class I, Zone 2 fixtures. Classified duty floodlights have 1/2” N.P.T tapped hub for power entry. Use 221 °F/105 °C supply wire. ➍ For Hot Restrike Option, add suffix –R. ➎ For 120 V 50 Hz change -225 to -125, or for 240 V 50 Hz change -225 to -245. ➏ For 120 V 50 Hz change -235 to -125. ➐ Supplied complete with CWI Isolated Secondary Ballast for 600 Vac. For 208, 240 or 480 V applications, change the -C7 suffix to -C2, -C3 or -C6 as required. V CSA Certification only. 1158 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 250/400 Integrally Ballasted Floodlights 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH. 175 W, 250 W, 400 W MH V Dimensions Description Catalog Numbers Crossarm Mounting Bracket Has 180° horizontal adjustment — degree marked. Facilitates mounting floodlight to crossarm or other flat surface, or to G-AM-8-WB. Includes floodlight yoke bolts. Malleable iron, zinc plated, chromate sealed, architectural bronze polyester finish. G-AM-8-CA Used with G-AM-8-CA. Clamps to 1” to 2-1/2” pipe, vertical or horizontal, or mounts on flat surfaces. Includes U-bolt and crossarm bracket bolts. Malleable iron, zinc plated, chromate sealed, with architectural bronze polyster finish. G-AM-8-WB Slip-fits 1-1/2” or 2” pipe size poletop tenons. Includes floodlight yoke bolts, 3 locking bolts, and cord grip. Body is malleable iron-zinc plated, chromate sealed, with cast aluminum cap. Assembly has architectural bronze polyester finish. G-SF20 Pipe or Wall Mount Bracket Poletop Slip-Fitter Locking-Type Photocontrol Receptacle For NEMA type photocontrol, with installation hardware and instructions. Should not be mounted on Class I, Division 2/Class 1, Zone 2 units. G-1PCR UV stabilized polycarbonate, with installation hardware and instructions. G-AM-6-VS Easy to install with hardware supplied. Aluminum, with architectural bronze POLYESTER finish. G-AM-6-V Vandal Shield Replacement Lens 604249003 Lighting: Enclosed and Gasketed — Floodlight Top Visor Replacement Lens Frame Assembly Complete with Lens 59607383002 Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1159 Areamaster™ 250/400 Integrally Ballasted Floodlights 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH. 175 W, 250 W, 400 W MH V Lighting Lighting: Enclosed and Gasketed — Floodlight NEC: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx nR, Groups IIA, IIB, IIC Line Type of Frequency Voltage Ballast 70 Watt High Pressure Sodium 120 60 HX-HPF 208 60 HX-HPF 240 60 HX-HPF 277 60 HX-HPF 60 HX-HPF 347V 480 60 HX-HPF 120 50 HX-HPF 220 50 HX-HPF 240 50 HX-HPF 100 Watt High Pressure Sodium 120 60 HX-HPF 208 60 HX-HPF 240 60 HX-HPF 277 60 HX-HPF 60 HX-HPF 347V 480 60 HX-HPF 120 50 HX-HPF 220 50 HX-HPF 240 50 HX-HPF 150 Watt High Pressure Sodium 120 60 HX-HPF 208 60 HX-HPF 240 60 HX-HPF 277 60 HX-HPF 60 HX-HPF 347V 480 60 HX-HPF 120 50 HX-HPF 220 50 HX-HPF 240 50 HX-HPF 250 Watt High Pressure Sodium 120 60 CWA 208 60 CWA 240 60 CWA 277 60 CWA 60 CWA 347V 480 60 CWA 120 50 CWA 230 50 CWA 400 Watt High Pressure Sodium 120 60 CWA 208 60 CWA 240 60 CWA 277 60 CWA 60 CWA 347V 480 60 CWA 120 50 CWA 230 50 CWA 175 Watt Pulse Start Metal Halide 120 60 Super CWA 208 60 Super CWA 240 60 Super CWA 277 60 Super CWA 60 Super CWA 347V 480 60 Super CWA 200 Watt Pulse Start Metal Halide 120 60 Super CWA 208 60 Super CWA 240 60 Super CWA 277 60 Super CWA 60 Super CWA 347V 480 60 Super CWA CEC V: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nR, Groups IIA, IIB, IIC Class II, Division 1 and 2, Groups E, F, G Class III Starting Amps Operating Amps Total Watts 0.90 0.50 0.44 0.35 0.30 0.21 1.08 0.59 0.54 0.82 0.48 0.41 0.36 0.30 0.21 0.81 0.49 0.45 94 94 94 94 93 94 97 97 97 1.30 0.76 0.66 0.60 0.45 0.33 0.90 0.50 0.45 1.15 0.67 0.60 0.52 0.39 0.31 1.20 0.65 0.60 130 130 130 130 130 135 130 130 130 2.00 1.15 1.00 0.85 0.52 0.50 1.50 0.85 0.75 1.70 0.95 0.85 0.72 0.56 0.47 1.60 0.90 0.80 188 188 188 188 188 189 188 188 188 2.00 1.20 1.00 0.85 0.60 0.40 1.85 0.95 2.50 1.50 1.30 1.10 0.93 0.65 2.75 1.44 295 295 295 295 295 295 300 300 3.30 1.80 1.60 1.40 1.00 0.80 3.70 1.85 3.80 2.20 1.90 1.70 1.32 1.00 4.00 2.00 465 465 465 465 464 465 465 465 0.90 0.50 0.35 0.30 0.25 0.25 1.78 1.08 0.89 0.76 0.65 0.50 199 199 199 199 208 213 2.10 1.15 1.10 0.75 0.25 0.35 2.00 1.25 1.00 0.85 0.70 0.50 235 235 235 235 232 237 NEC/CEC: IP66 Marine type electric fixtures, outside type (salt water) Line Type of Starting Frequency Voltage Ballast Amps 250 Watt Pulse Start Metal Halide 120 60 Super CWA 1.90 208 60 Super CWA 1.10 240 60 Super CWA 0.96 277 60 Super CWA 0.85 60 Super CWA 0.62 347V 480 60 Super CWA 0.45 120 50 Super CWA 1.90 230 50 Super CWA 1.00 320 Watt Pulse Start Metal Halide 120 60 Super CWA 2.60 208 60 Super CWA 1.50 240 60 Super CWA 1.30 277 60 Super CWA 1.15 60 Super CWA 0.70 347V 480 60 Super CWA 0.60 120 50 Super CWA 2.28 230 50 Super CWA 1.14 400 Watt Pulse Start Metal Halide 120 60 Super CWA 3.50 208 60 Super CWA 2.00 240 60 Super CWA 1.25 277 60 Super CWA 1.50 60 Super CWA 1.10 347V 480 60 Super CWA 0.90 120 50 Super CWA 3.17 230 50 Super CWA 1.65 175 Watt Metal Halide V 120 60 CWA 1.30 208 60 CWA 0.75 240 60 CWA 0.65 277 60 CWA 0.55 347 60 CWA 0.50 480 60 CWA 0.35 120 50 CWA 1.70 220 50 CWA 0.80 250 Watt Metal Halide V 120 60 CWA 1.20 208 60 CWA 0.65 240 60 CWA 0.60 277 60 CWA 0.50 347 60 CWA 0.80 480 60 CWA 0.30 120 50 CWA 2.00 220 50 CWA 0.94 400 Watt Metal Halide V 120 60 CWA 3.25 208 60 CWA 1.90 240 60 CWA 1.65 277 60 CWA 1.40 347 60 CWA 1.20 480 60 CWA 0.85 120 50 CWA 2.70 220 50 CWA 1.50 Operating Amps Total Watts 2.50 1.45 1.25 1.10 0.90 0.60 2.60 1.35 288 288 288 288 291 285 285 285 3.25 1.90 1.65 1.40 1.10 0.80 3.05 1.60 368 368 368 368 368 368 365 365 4.00 2.30 2.00 1.75 1.35 1.00 3.90 2.00 454 454 454 454 452 454 454 454 1.80 1.10 0.90 0.80 0.65 0.45 1.90 1.10 213 213 213 213 210 213 210 210 2.60 1.50 1.30 1.12 0.90 0.65 2.50 1.30 295 295 295 295 295 298 285 285 4.00 2.30 2.00 1.75 1.40 1.00 4.10 2.20 458 458 458 458 460 462 480 480 V CSA Certification only. 1160 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 250/400 Integrally Ballasted Floodlights 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W PSMH. 175 W, 250 W, 400 W MH V Distance in terms of mounting height ◊ Typical Footcandle Values Ft. Cdles for Iso-Footcandle Lines Mtg. Ht. 400W HPS 60’/18.3m 50’/15.2m 40’/12.2m 30’/9.1m 20’/6.1m A B C D E F 3.27 4.74 7.65 13.10 28.22 2.74 4.00 6.28 10.92 25.55 1.82 2.90 4.38 7.83 17.37 0.92 1.37 2.27 3.47 7.28 0.37 0.52 0.82 1.45 3.46 0.18 0.27 0.43 0.77 1.82 400W MH V 60’/18.3m 50’/15.2m 40’/12.2m 30’/9.1m 20’/6.1m 2.32 3.32 5.48 9.79 17.26 1.66 2.32 3.62 7.80 14.60 1.00 1.49 2.32 3.98 9.30 0.58 0.76 1.33 2.16 5.31 0.33 0.48 0.75 1.33 3.15 0.17 0.25 0.36 0.68 1.49 0.37 0.54 0.84 1.49 3.53 0.19 0.28 0.40 0.76 1.67 For 400W PSMH multiply FC values by 1.29; for 320W PSMH use 0.97. 400W PSMH 60’/18.3m 2.60 50’/15.2m 3.72 40’/12.2m 6.14 30’/9.1m 10.96 20’/6.1m 19.33 1.86 2.60 4.05 8.74 16.35 1.12 1.66 2.60 4.46 10.41 0.65 0.85 1.49 2.42 5.94 Ft. Cdles for Iso-Footcandle Lines Distance in terms of mounting height ◊ Mtg. Ht. 70W HPS 10’/3.0m 20’/6.1m 30’/9.1m G H I J K L 10.00 2.50 1.00 5.00 1.00 0.50 2.50 0.50 0.25 1.00 0.25 0.10 0.50 0.10 0.05 0.25 0.05 0.02 For 100W HPS lamps, multiply FC values by 1.5. For 150W HPS lamps, multiply FC values by 2.5. A B C D E F 1.96 2.84 4.58 7.85 16.90 1.64 2.40 3.76 6.54 15.30 1.09 1.74 2.62 4.69 10.40 0.55 0.82 1.36 2.08 4.36 0.22 .031 0.49 0.87 2.07 0.11 0.16 0.26 0.46 1.09 250W MH V 60’/18.3m 50’/15.2m 40’/12.2m 30’/9.1m 20’/6.1m 1.40 2.00 3.30 5.90 10.40 1.00 1.40 2.18 4.70 8.80 0.60 0.90 1.40 2.40 5.60 0.35 0.46 0.80 1.30 3.20 0.20 0.29 0.45 0.80 1.90 0.10 0.15 0.22 0.41 0.90 For 175W MH lamps, multiply FC values by 0.68. For 175W PSMH Lamps 0.85; for 200W PSMH use 1.03; for 250W PSMH use 1.22. Distance in terms of mounting height ◊ 250W PSMH 60’/18.3m 1.90 50’/15.2m 2.72 40’/12.2m 4.48 30’/9.1m 8.00 20’/6.1m 14.40 1.63 1.90 2.96 6.40 11.97 0.82 1.22 1.90 3.26 7.61 0.48 0.63 1.09 1.76 4.35 0.27 0.39 0.61 1.09 2.58 0.14 0.20 0.30 0.55 1.22 Lighting: Enclosed and Gasketed — Floodlight Distance in terms of mounting height ◊ Ft. Cdles for Iso-Footcandle Lines Mtg. Ht. 250W HPS 60’/18.3m 50’/15.2m 40’/12.2m 30’/9.1m 20’/6.1m For 175W MH lamps, multiply FC values by 0.68. For 175W PSMH Lamps 0.85; for 200W PSMH use 1.03; for 250W PSMH use 1.22. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting (i.e., ratio of distance to height. Example: @ 20’/6.1 m mounting height, 1 means 20’/6.1 m; 2 means 40’/12.2 m, etc. Photometric charts available on request. V CSA Certification only. 1161 Areamaster™ 1000 Floodlights Integrally Ballasted. 1000 W HPS; 1000 W, 1500 W MH For general or hazardous locations. NEC: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D CEC V: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nR, Groups IIA, IIB, IIC Applications • Powerful, efficient weatherproof floodlights for large areas such as: — Shopping malls — Industrial complexes — Ship loading areas — Mining sites — Parking lots — Sports areas • Suitable for wet locations. Lighting Lighting: Enclosed and Gasketed — Floodlight Features • Highly efficient, integrally ballasted floodlight. Has compact, lightweight, yet rugged diecast aluminum construction. Combines architecturally beautiful design with rugged dependability, simple installation and maintenance. • Easy to install and service. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • One-piece housing. • One-piece lens cover. Secured by four 1/4” Dia. captive stainless steel slotted hex-head bolts. • Thermal shock and impact resistant glass lens. • Heavy duty, high temperature silicone rubber gasket, firmly seated. • Heavy duty mogul-base porcelain socket with heavy gauge brass, nickel-plated, double lamp-grip screw shell and springloaded center contact. • Compound parabolic, double segment, finished aluminum reflector for optimum efficiency. • Mounting choice: (1) Yoke mount, zinc plated steel yoke with architectural bronze polyester finish. (2) Pole mount, built-in slip-fitter, for internal wiring, adjustable laterally and vertically, slip fits 2” or 2-1/2” pipe, architectural bronze polyester finish. • Cool operating temperatures for Class I, Division 2 fixtures translate into long luminaire life. Yoke Slip-Fit Projected Area: 3.36 Sq. Ft. Standard Materials • Ballast housing and lens door: copperfree (4/10 of 1% max.) aluminum • Gasket: silicone rubber • Socket: heavy duty porcelain with heavy gauge brass shell • Reflector: finished aluminum • Yoke mount: zinc plated steel • Bolts: stainless steel Standard Finishes • Ballast housing, lens cover, yoke and pole mount: architectural bronze polyester • Socket: nickel-plated Certifications and Compliances • UL Standard: UL 1598, UL 844 • UL Listed: E10794 V CSA Certification only. 1162 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 1000 Floodlights Integrally Ballasted. 1000 W HPS; 1000 W, 1500 W MH For general or hazardous locations. NEC: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Lamp Watts ➍ Line Voltage ➍ CEC V: For general, marine and hazardous locations Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nR, Groups IIA, IIB, IIC NEC/CEC Class 1, Division 2 Classified Duty and Marine Yoke Mount Catalog Number ➌ General Duty CEC Class I, Zone 2, Ex nR Classified Duty and Marine Yoke Mount Catalog Number ➌ NEC/CEC Yoke Mount Catalog Number ➋ NEC/CEC Slip-Fit Mount Catalog Number ➊➋ G-AM861L-MT-I/2 G-AM861L-MT G-AM865L-MT G-AM861L-MT-Z V G-AM861L-TT-I/2 V G-AM861L-TT V G-AM865L-TT V G-AM861L-TT-Z V High Pressure Sodium 1000 120/208/240/277 1000 120/277/347 1000 480 G-AM861L-48-I/2 G-AM861L-48 G-AM865L-48 G-AM861L-48-Z V 1000 120/208/240/277 G-AM861H-MT-I/2 G-AM861H-MT G-AM865H-MT G-AM861H-MT-Z V 1000 120/277/347 G-AM861H-TT-I/2 V G-AM861H-TT V G-AM865H-TT V G-AM861H-TT-Z V 1000 480 G-AM861H-48-I/2 G-AM861H-48 G-AM865H-48 G-AM861H-48-Z V 1500 120/208/240/277 — G-AM961H-MT G-AM965H-MT — 1500 480 — G-AM961H-48 G-AM965H-48 — Metal Halide Dimensions Lighting: Enclosed and Gasketed — Floodlight Slip-Fit Mount Yoke Mount Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting ➊ Slip-fits 2” or 2-1/2” pipe-size tenons. ➋ Add suffix -E to catalog number if provision for bayonet type quartz emergency option is desired. Furnished with socket installed and pre-wired. Quartz emergency option NOT available for Class I, Division 2 fixtures. ➌ Classified duty floodlights have 3/4” N.P.T. tapped hub for power entry. ➍ Additional ballast types and voltages are available. Contact your local sales representative. V CSA Certification only. 1163 Areamaster™ 1000 Floodlight Mounting Fittings and Accessories Integrally Ballasted. 1000 W HPS; 1000 W, 1500 W MH For general or hazardous locations. Dimensions Description Catalog Numbers Crossarm Mounting Bracket Has 180° horizontal adjustment — degree marked. Facilitates mounting floodlight to crossarm or other flat surface, or to G-AM-8-WB. Includes floodlight yoke bolts. Malleable iron, zinc plated, chromate sealed, architectural bronze polyester finish. G-AM-8-CA Used with G-AM-8-CA. Clamps to 1” to 2-1/2” pipe, vertical or horizontal, or mounts on flat surfaces. Includes U-bolt and crossarm bracket bolts. Malleable iron, zinc plated, chromate sealed, with architectural bronze polyster finish. G-AM-8-WB Slip-fits 2” or 2-1/2” poletop tenons. Includes floodlight yoke bolts, 3 locking bolts, and cord grip. Malleable iron, zinc plated, chromate sealed, with architectural bronze POLYESTER finish. G-AM-8-SF Pipe or Wall Mount Bracket Poletop Slip-Fitter Locking-Type Photocontrol Receptacle For NEMA type photocontrol, with installation hardware and instructions. Should not be mounted on Class I, Division 2 units. G-1PCR UV stabilized polycarbonate, with installation hardware and instructions. G-AM-8-NVS Easy to install with hardware supplied. Aluminum, with architectural bronze POLYESTER finish. G-AM-6-NV Lighting: Enclosed and Gasketed — Floodlight Vandal Shield Top Visor Replacement Lens 59604249004 Replacement Lens Frame Assembly 59617539001 Lighting Complete with Lens 1164 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster™ 1000 Floodlight Photometric Data Integrally Ballasted. 1000 W HPS; 1000 W, 1500 W MH For general or hazardous locations. Photometric Data † Typical Footcandle Values † HPS 134° 131° 77,440 55.3% 40,251 38,396 80,846 57.7% Horiz. Spread Vert. Spread Beam Lumens Beam Effic. Max. CP Avg. Max. CP Total Lumens Total Effic. MH 133° 124° 62,112 56.5% 45,909 38,490 66,008 60.0% Electrical Specifications Lamp Line Type of Starting Type Voltage Ballast Amps 1000 Watt High Pressure Sodium HPS 120 C.W.A. 6.35 HPS 208 C.W.A. 3.80 HPS 240 C.W.A. 3.20 HPS 277 C.W.A. 2.75 HPS 347 C.W.A. 2.20 HPS 480 C.W.A. 1.80 1000 Watt Metal Halide MH 120 C.W.A. 8.00 MH 208 C.W.A. 4.60 MH 240 C.W.A. 4.00 MH 277 C.W.A. 3.50 MH 347 C.W.A. 2.50 MH 480 C.W.A. 2.00 1500 Watt Metal Halide MH 120 C.W.A. 13.50 MH 208 C.W.A. 7.70 Mtg. Ht. Ft/M A Footcandle Values for Iso Footcandle Lines B C D E F 1000W HPS Clear, 140,000 Lumens, Cat. No. G-AM861L-MT 60/18.3 8.0 3.0 1.0 0.5 0.20 0.10 50/15.2 11.5 4.6 1.5 0.72 0.27 0.15 40/12.2 17.3 6.8 2.4 1.0 0.45 0.21 30/9.1 31.5 12 4.1 1.9 0.80 0.30 1000W MH Clear, 110,000 Lumens, Cat. No. G-AM861H-MT 60/18.3 6.0 3 1.0 0.5 0.20 0.10 50/15.2 8.2 4.2 1.4 0.8 0.28 0.15 40/12.2 12.6 7.9 2.3 1.2 0.42 0.19 30/9.1 23.0 11.6 4.0 2.1 0.70 0.25 240 C.W.A. 6.70 Total Watts 9.50 5.50 4.80 4.20 3.30 2.45 1100 1100 1100 1100 1100 1100 9.20 5.30 4.60 4.00 3.20 2.30 1080 1080 1080 1080 1080 1080 14.00 8.00 1610 1610 7.00 1610 MH 277 C.W.A. 5.90 6.00 1610 MH 480 C.W.A. 3.30 3.50 1610 T Numbers and Temperature Ratings of “Classified Duty” Areamaster 1000 Fixture Wattage Fixture Type T Ratings Ambient °C Temp. ˚°F/°C T Rating Temperature Range °F/°C 1000 Class I Div 2 325 77/25 574-617 / 301-325 1000 V Ex nR IIC T3 77/25 277-392 / 136-200 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting † Photometric charts available on request. ◊ i.e., ratio of distance to height. Example: @20’/6.1 m mounting height, 1 means 20’/6.1 m; 2 means 40’/12.2 m, etc. V CSA Certification only. Lighting: Enclosed and Gasketed — Floodlight MH Operating Amps 1165 PN Series Floodlights – Zone 2, 21 and 22 Metal Halide, Sodium and Mercury Listed for simultaneous exposure to gas, combustible dusts and flammable gases or vapors. Zone 2, 21 and 22 II 2 D II 3 GD ATEX / IECEx IP66 - IK07/08 Applications • Powerful, efficient floodlights for large areas such as industrial complexes and ship loading areas. • Rated for use in hazardous areas. Features • Highly efficient, integrally ballasted floodlight. Has compact, lightweight, yet rugged die cast aluminum construction. • Simple installation and maintenance. • Integral ballast; 230/240 V, 50 Hz. • One-piece lens cover. • Heavy duty, high temperature silicone rubber gasket, firmly seated. • Socket: E40 (E27 for 70 W HPS version). • Reflectors: double segment compound parabolic with Alzack® finish for maximum efficiency. • Mounting: yoke mount. Standard Materials • Ballast housing and lens door: copperfree (4/10 of 1% max.) aluminum • Gasket: silicone rubber • Socket: heavy duty porcelain with heavy gauge brass shell • Reflector: finished aluminum • Yoke mount: zinc plated steel • Bolts: stainless steel Standard Finishes • Ballast housing, lens cover, yoke and pole mount: architectural bronze polyester • Socket: nickel-plated • Size M — Certification Type PJn — Gas: Zone 2 Conforming to ATEX 94/9/CE: CE 3G ATEX/IEC Protection: Ex nR II T Rating: T2 to T4 Ambient Temperature: 104 °F to 131 °F/40 °C to 55 °C — Dust: Zone 22 II 3 D Conforming to ATEX 94/9/CE: CE ATEX/IEC Protection: Ex tD A22 Surface Temperature: T243 °F/T117 °C to 442 °F/T228 °C — Gas, Zone 2 and Dust, Zone 22 Ambient Temperature: 104 °F to 131 °F / 40 °C to 55 °C ATEX Certificate: LCIE 08 ATEX 6035X IEC Certificate: IECEx LCI 04.0015 Other Certifications: GOST Impact Resistance (shock): IK07 — Dust: Zone 21 I2D Conforming to ATEX 94/9/CE: CE ATEX/IEC Protection: Ex tD A21 Surface Temperature: T149 °F to T277 °F/T65 °C to T136 °C Ambient Temperature: -4 °F to 104 °F/-20 °C to 40 °C ATEX Certificate: LCIE 02 ATEX 6246X Impact Resistance (shock): IK07 with glass diffuser, IK08 with polycarbonate diffuser — CE Declaration of Conformity: 50251 — Index of Protection (solid and liquid): IP66 Lighting Lighting: Enclosed and Gasketed — Floodlight Certifications and Compliances • Size G — Certification Type PJn — Gas: Zone 2 Conforming to ATEX 94/9/CE: CE 3G ATEX/IEC Protection: Ex nR II T Rating: T3 — Dust: Zone 22 Conforming to ATEX 94/9/CE: CE II 3 D ATEX/IEC Protection: Ex tD A22 Surface Temperature: T369 °F to T378 °F/T187 °C to T192 °C — Gas, Zone 2 and Dust, Zone 22 Ambient Temperature: 104 °F to 131 °F/40 °C to 55 °C CE Declaration of Conformity: 50215 ATEX Certificate: LCIE 08 ATEX 6035X IEC Certificate: IECEx LCI 04.0015 Other Certifications: GOST Impact Resistance (shock): IK07 — Dust: Zone 21 Conforming to ATEX 94/9/CE: CE 008 II 2 D ATEX/IEC Protection: Ex tD A21 Surface Temperature: T250°F to T360°F / T121°C to T182°C Ambient Temperature: -4°F to 104°F / -20°C to 40°C CE Declaration of Conformity: 50274 ATEX Certificate: LCIE 02 ATEX 6246X Impact Resistance (shock): IK07 with glass diffuser, IK08 with polycarbonate diffuser — Index of Protection (solid and liquid): IP66 • Ex Standards: EN/IEC 60079-0, 60079-15, 61241-0, 61241-1 • Product Standards: EN/IEC 60598-1 • EMC Standards: EN/IEC 55015, 61547 • Other Standards: EN/IEC 60529 (IP) 1166 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PN Series Floodlights – Zone 2, 21 and 22 Metal Halide, Sodium and Mercury Listed for simultaneous exposure to gas, combustible dusts and flammable gases or vapors. Zone 2, 21 and 22 II 2 D II 3 GD ATEX / IECEx IP66 - IK07/08 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For PN Series Luminaires PN P Series: PN - PN Series Zone 2, 21 & 22 ATEX / IEC Certified Body Size: P - Small M - Medium L - Large 1 H Mounting: 1 - Yoke 5 - Pole Slip-fit 70 Wattage: 70 - 70 W 15 - 150 W 25 - 250 W 40 - 400 W ① 99 - 1000 W ① Lamp Type: H - Metal Halide L - Sodium M - Mercury A G MT Diffuser: G - Glass P - Polycarbonate ② Entry Size: A - M20 F Options: S - Stainless Steel Housing Options: XA - 220 Vac 50 Hz (Magnetic Ballast) XJ - 230/240 Vac 50 Hz (Magnetic Ballast) Lighting: Enclosed and Gasketed — Floodlight Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting ① 400 W Zones 21-22 and 1000 W Zones 2-22 only with large body (suffix -G). ② Zone 2-22 doesn’t exist with polycarbonate diffuser. 1167 PN Series Floodlight T Ratings – Zone 2, 21 and 22 Metal Halide, Sodium and Mercury Listed for simultaneous exposure to gas, combustible dusts and flammable gases or vapors. Zone 2, 21 and 22 II 2 D II 3 GD ATEX / IECEx IP66 - IK07/08 Zone 21 (Dust) Dust Surface Temperatures for Ta = 104 °F/40 °C Operating Position Body Size: M Body Size: L Lamp and Power 70 W Sodium 150 W Sodium 250 W Sodium 250 W Metal Halide 250 W Mercury 400 W Sodium 1000 W Sodium 1000 W Metal Halide Glass Diffuser 167 °F/75 °C 213.8 °F/101 °C 260.6 °F/127 °C 253.4 °F/123 °C 276.8 °F/136 °C 25.8 °F/126 °C 350.6 °F/177 °C 359.6 °F/182 °C Polycarbonate Diffuser 149 °F/65 °C 195.8 °F/91 °C 242.6 °F/117 °C 235.4 °F/113 °C 267.8 °F/131 °C 249.8 °F/121 °C – – Time Before Opening in Inches/Millimeters 1.97/50 0.99/25 0.59/15 0.59/15 0.59/15 1.18/30 1.18/30 1.18/30 Lamp and Power 70 W Sodium 150 W Sodium 150 W Metal Halide 250 W Sodium 250 W Metal Halide 250 W Mercury 400 W Sodium 400 W Metal Halide 400 W Mercury 1000 W Sodium 1000 W Metal Halide T Rating for Ta = 104 °F/40 °C T4 T4 T4 T3 T3 T3 T3 T2 T2 T3 T3 T Rating for Ta = 122 °F/50 °C T4 T4 T4 T3 T3 T3 T3 (Cable T ° = 188.6 °F/87 °C) T2 (Cable T ° = 183.2 °F/84 °C) T2 (Cable T ° = 183.2 °F/84 °C) T3 T3 T Rating for Ta = 131 °F/55 °C T4 T4 T4 T3 (Cable T ° = 179.6 °F/82 °C) T3 T3 (Cable T ° = 177.8 °F/81 °C) T2 (Cable T ° = 197.6 °F/92 °C) T2 (Cable T ° = 192.2 °F/89 °C) T2 (Cable T ° = 192.2 °F/89 °C) – – Lamp and Power 70 W Sodium 150 W Sodium 150 W Lodure 250 W Sodium 250 W Lodure 250 W Mercury 400 W Sodium 400 W Lodure 400 W Mercury T Rating for Ta = 104 °F/40 °C 242.6 °F/117 °C 2.66 °F/130 °C 262.4 °F/128 °C 320 °F/160 °C 47 °F/175 °C 357.8 °F/181 °C 388.4 °F/198 °C 442.4 °F/228 °C 440.6 °F/227 °C 368.6 °F/187 °C (for Ta = 122 °F/50 °C) 377.6 °F/192 °C (for Ta = 122 °F/50 °C) T Rating for Ta = 122 °F/50 °C – – – – – – T3 (Cable T ° = 188.6 °F/87 °C) T2 (Cable T ° = 183.2 °F/84 °C) T2 (Cable T ° = 183.2 °F/84 °C) T Rating for Ta = 131 °F/55 °C – – – T3 (Cable T ° = 179.6 °F/82 °C) – T3 (Cable T ° = 177.8 °F/81 °C) T2 (Cable T ° = 197.6 °F/92 °C) T2 (Cable T ° = 192.2 °F/89 °C) T2 (Cable T ° = 192.2 °F/89 °C) Cable T ° = 194 °F/90 °C – Cable T ° = 194 °F/90 °C – Zone 2 (Gas) Body Size: M Lighting: Enclosed and Gasketed — Floodlight Body Size: L Zone 22 (Dust) Body Size: M 1000 W Sodium Body Size: L Lighting 1000 W Lodure 1168 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PN Series Floodlights – Zone 2, 21 and 22 Metal Halide, Sodium and Mercury Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Zone 2, 21 and 22 II 2 D II 3 GD ATEX / IECEx IP66 - IK07/08 Type Weight (lbs/kg) Volume (in3/dm3) Permissible lamps (not supplied) Body Size Catalog Number Standard with Lamp Glass Sealed on Frame 70 W HP Sodium 26.7/12.1 3814/62.5 Ovoid/Tubular Medium PNM1L70AGXJ 150 W HP Sodium 28.4/12.9 3814/62.5 Ovoid/Tubular Medium PNM1L15AGXJ 250 W HP Sodium 31.5/14.3 3814/62.5 Ovoid/Tubular Medium PNM1L25AGXJ 400 W HP Sodium 35.3/16.0 3814/62.5 Ovoid/Tubular Medium PNM1L40AGXJ 400 W HP Sodium – – Ovoid/Tubular Large PNL1L40AGXJ 150 W Metal Halide 28.4/12.9 3814/62.5 Ovoid/Tubular Medium PNM1H15AGXJ 250 W Metal Halide 31.5/14.3 3814/62.5 Ovoid/Tubular Medium PNM1H25AGXJ 400 W Metal Halide 35.3/16.0 3814/62.5 Tubular Medium PNM1H40AGXJ 400 W Metal Halide – – Ovoid/Tubular Large PNL1H40AGXJ 250 W Mercury Vapor 28.4/12.9 3814/62.5 Ovoid Medium PNM1M25AGXJ 400 W Mercury Vapor 30.4/13.8 3814/62.5 Ovoid/Tubular Medium PNM1M40AGXJ With External Polycarbonate Weatherproof Protection 70 W HP Sodium 29.1/13.2 3814/62.5 Ovoid/Tubular Medium PNM1L70APXJ 150 W HP Sodium 30.9/14.0 3814/62.5 Ovoid/Tubular Medium PNM1L15APXJ 250 W HP Sodium 34.0/15.4 3814/62.5 Ovoid/Tubular Medium PNM1L25APXJ 400 W HP Sodium – – Ovoid/Tubular Large PNL1L40APXJ 150 W Metal Halide 30.9/14.0 3814/62.5 Ovoid/Tubular Medium PNM1H15APXJ 250 W Metal Halide 34.0/15.4 3814/62.5 Ovoid/Tubular Medium PNM1H25APXJ – – Ovoid/Tubular Large PNL1H40APXJ 30.9/14.0 3814/62.5 Ovoid Medium PNM1M25APXJ 400 W Metal Halide 250 W Mercury Vapor Description Catalog Number Fall Prevention Kit (3.94"/1.2 m stainless steel chain) for M20 cable entry FESCM20 Slipfitter Adapter — fits medium body GSF20 Slipfitter Adapter — fits large body GAM8SF Lighting: Enclosed and Gasketed — Floodlight Accessories Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1169 PN Series Floodlight Dimensions and Photometric Data – Zone 2, 21 and 22 Metal Halide, Sodium and Mercury Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Dimensions Size M Size L 7.76”/197 mm 7.36”/ 197 mm 22.17”/563.0 mm 5.55”/ 141.0 mm 3.50”/ 89.0 mm 2.78”/ 70.5 mm 2.01”/ 51.0 mm (3) Mounting Holes 0.55”/14.0 mm 16.14”/410.0 mm 2.01”/ 51.0 mm 5.55”/ 141.0 mm (3) Mounting Holes 0.54”/13.8 mm 3.50”/ 89.0 mm 5.12”/ 130.0 mm 5.12”/ 130.0 mm 2.17”/ 55.0 mm 3.50”/ 89 mm 11.22”/ 285.0 mm 13.50”/ 343.0 mm 19.68”/500.0 mm 22.17”/563.0 mm 16.92”/460.0 mm 3.62”/ 92.0 mm 3.62”/ 92.0 mm Photometric Data Lamps: 70 W High Pressure Sodium Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 Candelas (0-180) (90-270) 0 487 487 5 439 461 10 416 387 15 372 324 20 208 290 25 129 294 30 116 319 35 111 318 40 101 289 45 86 193 50 70 150 55 84 141 60 62 132 65 22 88 70 9 15 Total Luminaire Efficiency = 74.6% Degrees Longitudinal Transverse Lighting Lighting: Enclosed and Gasketed — Floodlight Degrees 1170 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Corroflood™ 250/400 Stainless Steel Floodlights Integral Ballast. 250 W, 400 W HPS or PSMH. Mogul Base For Marine; Class I, Division 2 Hazardous Locations; Class I, Zone 2; and Corrosive Environments. Class I, Division 2, Groups A, B, C, D NEMA 4X Suitable for Marine, Outdoor Salt Water Location Applications • Powerful, efficient weatherproof lighting for medium and large areas such as chemical plants, refineries, shipboard and marine industrial process areas where severely corrosive agents are present. Features • Compact in size, rugged and dependable. • Easy to install and service. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Completely assembled fixture saves installation time and cost. • Easily removable ballast tray. • Hinged door. • Seamless welded construction. • Can be mounted in any position ranging from lens down to horizontal, lens up. • Stainless steel latches to allow relamping without tools. Standard Materials • Fixture body and trunnion arm: 316 stainless steel • 16 gauge 316 stainless steel • Lens: thermal-shock-resistant and tempered impact-resistant glass • Gasket: heavy-duty, high-temperature silicone rubber, firmly seated • Socket: heavy-duty, mogul base porcelain with heavy gauge brass, nickel-plated, double lamp-grip screw shell and springloaded center contact • Reflector: compound parabolic, double segment, finished aluminum for optimum efficiency Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10794 Line Voltage T Rating For Class I, Division 2 Classified Duty and Marine Yoke Mount Catalog Number ➋ High Pressure Sodium 400 W HPS 120/208/240/277 350 SSF771L-MT-I/2 400 W HPS 120/277/347 350 400 W HPS 250 W HPS 480 120/208/240/277 350 350 SSF771L-TT-I/2 V SSF771L-48-I/2 SSF671L-MT-I/2 250 W HPS 120/277/347 350 480 350 SSF671L-TT-I/2 V SSF671L-48-I/2 250 W HPS Pulse Start Metal Halide 400 W PSMH 120/208/240/277 350 SSF771P-MT-I/2 400 W PSMH 120/277/347 350 400 W PSMH 250 W PSMH 480 120/208/240/277 350 350 SSF771P-TT-I/2 V SSF771P-48-I/2 SSF671P-MT-I/2 250 W PSMH 120/277/347 350 250 W PSMH 480 350 SSF671P-TT-I/2 V SSF671P-48-I/2 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1171 Lighting Floodlights have 3/4” NPT tapped hub for power entry. ➊ Quartz emergency option NOT available for Class I, Division 2 fixtures. Contact your local sales representative for emergency quartz for non-classified areas. V CSA Certification only. Lighting: Enclosed and Gasketed — Floodlight Lamp Type Corroflood™ 250/400 Stainless Steel Floodlights Integral Ballast. 250 W, 400 W HPS or PSMH. Mogul Base For Marine; Class I, Division 2 Hazardous Locations; Class I, Zone 2; and Corrosive Environments. Mounting Fittings and Accessories Description Catalog Number Crossarm Mounting Bracket — Has 180° horizontal adjustment—degreemarked. Facilitates mounting floodlight to crossarm or other flat surface, or to G-AM-8-WB. Includes floodlight yoke bolts. Malleable iron, zinc plated, chromate sealed, architectural bronze polyester finish. Pipe or Wall Mount Bracket — Used with G-AM-8-CA. Clamps to 1” to 2-1/2” pipe, vertical or horizontal, or mounts on flat surfaces. Includes U-bolt and crossarm bracket bolts. Malleable iron, zinc plated, chromate sealed, with architectural bronze POLYESTER finish. Poletop Slip-Fitter — 1-1/2” or 2” pipe size poletop tenons. Includes floodlight yoke bolt, 3 locking bolts, and cord grip. Body is malleable iron—zinc plated, chromate sealed, with cast aluminum cap. Assembly has architectural bronze polyester finish. G-AM-8-CA G-AM-8-WB G-SF20 Poletop Slip-Fitter — Slip-Fits 2” or 2-1/2” poletop tenons. Includes floodlight yoke bolts, 3 locking bolts and cord grip. Malleable iron, zinc plated, chromate sealed, with architectural bronze polyester finish. G-AM-8-SF Dimensions 7.00”/ 177.8 mm Lighting: Enclosed and Gasketed — Floodlight 23.00”/584.2 mm 18.50”/469.9 mm 17.25”/438.15 mm 0.38”/9.1 mm Dia. (2) Outer Holes 0.56”/14.3 mm Dia. Center Hole 18.50”/469.9 mm 1.75”/ 44.45 mm 3.50”/ 88.9 mm Trunnion Mount 3.50”/88.9 mm 6.00”/152.4 mm 4.50”/ 114.3 mm Lighting 4.00”/101.6 mm Crossarm Mounting Bracket 1172 Pipe or Wall Mount Bracket Poletop Slip-Fitter Poletop Slip-Fitter Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Corroflood™ 250/400 Stainless Steel Floodlight Photometric Data Integral Ballast. 250 W, 400 W HPS or PSMH. Mogul Base For Marine; Class I, Division 2 Hazardous Locations; Class I, Zone 2; and Corrosive Environments. Electrical Specifications — All ballasts are CWA type Typical Footcandle Values † Line Voltage Starting Amps 400 W High Pressure Sodium 120 3.30 208 1.80 240 1.60 277 1.40 347 1.00 480 0.80 400 W Pulse Start Metal Halide 120 3.50 208 2.00 240 1.25 277 1.50 347 1.10 480 0.90 250 W High Pressure Sodium 120 2.00 208 1.20 240 1.00 277 0.85 347 0.60 480 0.40 250 W Pulse Start Metal Halide 120 1.90 208 1.10 240 0.96 60/18.3 50/15.2 40/12.2 30/9.1 20/6.1 60/18.3 50/15.2 40/12.2 30/9.1 20/6.1 Total Watts 3.80 2.20 1.90 1.70 1.32 1.00 465 465 465 465 464 465 4.00 2.30 2.00 1.75 1.35 1.00 454 454 454 454 452 454 2.50 1.50 1.30 1.10 0.93 0.65 295 295 295 295 295 295 2.50 1.45 1.25 288 288 288 277 0.85 1.10 288 347 0.62 0.90 291 480 0.45 0.60 285 Footcandles for Iso-Footcandle Lines A B 400 W HPS 3.27 2.74 4.74 4.00 7.65 6.28 13.10 10.92 28.22 25.55 400 W PSMH 2.60 1.86 3.72 2.60 6.14 4.05 10.96 8.74 19.33 16.35 C D E F 1.82 2.90 4.38 7.83 17.37 0.92 1.37 2.27 3.47 7.28 0.37 0.52 0.82 1.45 3.46 0.18 0.27 0.43 0.77 1.82 1.12 1.66 2.60 4.46 10.41 0.65 0.85 1.49 2.42 5.94 0.37 0.54 0.84 1.49 3.53 0.19 0.28 0.40 0.76 1.67 A B 250 W HPS 1.96 1.64 2.84 2.40 4.58 3.76 7.85 6.54 16.90 15.30 250 W PSMH 1.90 1.36 2.72 1.90 4.48 2.96 8.00 6.40 14.40 11.97 C D E F 1.09 1.74 2.62 4.69 10.40 0.55 0.82 1.36 2.08 4.36 0.22 0.31 0.49 0.87 2.07 0.11 0.16 0.26 0.46 1.09 0.82 1.22 1.90 3.26 7.61 0.48 0.63 1.09 1.76 4.35 0.27 0.39 0.61 1.09 2.58 0.14 0.20 0.30 0.55 1.22 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting † Photometric charts available on request. ◊ i.e., ratio of distance to height. Example: @ 20’/6.1 m mounting height, 1 means 20’/6.1 m; 2 means 40’/12.2 m, etc. Lighting: Enclosed and Gasketed — Floodlight Mtg. Ht. Ft/M Operating Amps 1173 Wallmaster I/2 for Hazardous and Wet Locations — Class I, Division 2/Zone 2 V cCSAus Certification Only. Enclosed and Gasketed. Integrally Ballasted. 70 W, 100 W, 150 W HPS Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Groups IIA, IIB, IIC Applications • Wall mounted luminaire suitable for outdoor applications. • Areas where flammable gases are present under conditions defines by NEC Class I, Division 2. Features • Attractive yet rugged design. • Side hinged door allows unobstructed access to lamp and wiring components. • Built in stop limits door opening to 90° and protects the lens from breakage. • Latch mechanism: unique heavy-duty stainless steel latch secures the cover assembly while allowing the luminaire to be relamped without the use of tools. • Prismatic tempered glass lens is thermal-shock- and impactresistant giving a soft diffused light. • Installation is fast and easy. • Luminaire is furnished with two plugged 1/2” conduit entries. A 1/2” knockout allows rear entry. • Mogul base socket is heavy-duty porcelain with heavy gauge brass nickel plated double lamp grip screw shell and spring loaded center contacts. • Aluminum reflector is designed for maximum efficiency. • Standard finish is architectural bronze tone baked epoxy. Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 CSAus Certified: 025428 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 Order using catalog numbering guide below. Catalog Numbering Guide For Wallmaster I/2 Luminaires Lighting: Enclosed and Gasketed — Floodlight Series: GWM - Wallmaster Lighting GWN V CSA Certification only. 70 L Lamp Type: L - High Pressure Sodium F - Fluorescent Wattage: 70 - 70 W HPS 10 - 100 W HPS 15 - 150 W HPS 36 - Two 18 W PL-T 52 - Two 26 W PL-T 64 - Two 32 W PL-T 1174 MT H R Ratings: H - Hazardous Location Voltage: 48 - 480 MT - 120/208/240/277 BU - 120-277, 50/60 Hz (Fluorescent Only) TT - 120/277/347 Options: E – Quartz Auxiliary Light (NonHazardous HID only) G – Wire Guard Q – Hazardous Photocontrol 120 to 277 Vac (Class I, Div. 2) R – HRE (Hot Restrike for HID only) S – PE (Safety Starter for HID only) T – Tamper proof Latch V – Polycarbonate Vandal Shield Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Wallmaster I/2 for Hazardous and Wet Locations — Class I, Division 2/Zone 2 V cCSAus Certification Only. Enclosed and Gasketed. Integrally Ballasted. 70 W, 100 W, 150 W HPS Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Groups IIA, IIB, IIC “T” Numbers for Wallmaster I/2 Fixtures Lamp Watts Lamp Type Supply Wire °F/°C Maximum Ambient Temperature °F/°C Class I, Division 2 Class I, Zone 2 70 HPS 257/125 104/40 T2D 100 HPS 257/125 77/25 T2C 150 HPS 257/125 77/25 T2A 36 Fluorescent 257/125 104/40 131/55 T3 52 Fluorescent 257/125 104/40 131/55 T3 64 Fluorescent 257/125 104/40 131/55 T3 “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 Accessories Description Catalog Number GWMWG Vandal Shield - UV stabilized polycarbonate. Can be used with guard. GWMLS Clear Replacement Lens GWML Lighting: Enclosed and Gasketed — Floodlight Guard - Stainless steel plated Dimensions 5.44”/ 138.1 mm 14.00”/355.6 mm 12.13”/ 308.0 mm Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1175 TVA Obstruction, Approach and Boundary Luminaires V Lighting: Enclosed and Gasketed — Visual Signal Lighting CSA Certification Only For use with Threaded Rigid Metal Conduit and IMC. Class I, Division 2 versions available Applications • Transport Canada approved TVA490 series low intensity obstruction, approach or boundary light. • TVA490 series obstruction lights are suitable for use on communication towers or other tall structures and buildings. Features • TVA obstruction lights are available with one or two lamps. • Models are equipped with rainports in the globe holder which keeps the wiring chamber dry. • TVA obstruction lights are rugged cast aluminum construction. • Two lamp fixtures are furnished with pre-wired sockets. • Utilizes Type A-21 116 W clear traffic signal lamp. • A corrosion resistant finish protects TVA fixtures. TVA490 obstruction lights are approved for use by Transport Canada. • Engineered for easy and safe maintenance, TVA490 fixtures are serviced without tools: (1) The globe holder is secured with a captive thumb screw (2) a one-eighth turn twist removes the globe and lobe holder (3) the assembly is hung from a safety chain freeing both hands • Fresnel glass lenses and three lamp holder positions permit use of TVA490 fixtures on structures below 50 feet/15.2 meters, from 50 to 100 feet / 15.2 to 30.5 meters, and over 100 feet/30.5 meters. • A plugged 1" side hub and a 1-1/4" bottom hub provide conduit entry. • Transfer and failure alarm relays for both one and two lamp fixtures. • Pilot light assembly contains a red pilot light to indicate lamp failure. Standard Materials • TVA bodies: copperfree (4/10 of 1% max.) aluminum • Lamp holders: porcelain • Transfer and failure alarm, pilot light assembly: ferrous alloy enclosure • Supply wire requirement: 90 ºC TVA 1490 TVA 2490 Standard Finish • TVA490: international orange epoxy clad finish • Transfer failure alarm, pilot light assembly: triple coat – (1) zinc electroplate, (2) chromate and (3) aluminum polymer enamel Certifications and Compliances • CSA Standard: C22.2 No. 250 • CSA Certified: 009349 V CSA Certification only. 1176 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 TVA Obstruction, Approach and Boundary Luminaires V CSA Certification Only Lighting For use with Threaded Rigid Metal Conduit and IMC. Class I, Division 2 versions available Hub Size (Inches) Side Bottom Catalog Number TVA490 Obstruction, Approach and Boundary Lights Type A-21 Clear Traffic Signal Light 116 W One Lamp Fixtures Obstruction with Red Globe — 1 TVA1490 Approach with Yellow Globe — 1 TVA1490Y Boundary with Clear Globe — 1 TVA1490C One Lamp Haz. Loc. Fixtures Obstruction with Red Globe — 1 TVA1490H Approach with Yellow Globe — 1 TVA1490YH Boundary with Clear Globe — 1 TVA1490CH Two Lamp Fixtures Obstruction with Red Globe 1 1-1/4 ① TVA2490 Approach with Yellow Globe 1 1-1/4 ① TVA2490Y Boundary with Clear Globe 1 1-1/4 ① TVA2490C 1 1-1/4 ① TVA2490H Two Lamp Haz. Loc. Fixtures Obstruction with Red Globe Approach with Yellow Globe 1 1-1/4 ① TVA2490YH Boundary with Clear Globe 1 1-1/4 ① TVA2490CH Single Lamp — 1 TVA1400 Two Lamp 1 1-1/4 TVA2400 TVA490 Replacement Parts Mounting Fittings With Globe Holder and Lamp Socket Globes Fresnel Red V-990R Aviation yellow V-990Y Clear V-990C Lamp Socket Porcelain — Medium Base V-1025 Globe Gasket Neoprene V-2055G Wiring Chamber Cover Cover assembly for two lamp fixture wiring chamber. With gasket and screws V-2010 ① To order with 1/4" to 1" reducer in the bottom hub add suffix -RB100. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1177 Lighting: Enclosed and Gasketed — Visual Signal Description TVA Obstruction, Approach and Boundary Luminaire Accessories V Lighting: Enclosed and Gasketed — Visual Signal Lighting CSA Certification Only For use with Threaded Rigid Metal Conduit and IMC. Class I, Division 2 versions available Description Hub Size (Inches) Catalog Number Lamp Failure Alarm In the event of both lamps failing in the obstruction light an alarm circuit is triggered. Weather-proof enclosure is furnished with feed-thru hubs. 120 Vac, 50/60 Hz Relay drops out at 0.6 amps. 1 FDC-32R2 In the event of a lamp failure, power is transferred to the standby lamp and an alarm circuit is activated. Weather-proof enclosure is furnished with feed-thru hubs. 120 Vac, 50/60 Hz Relay drops out at 0.6 amps. 1 FDC-32R1 Connected to failure alarm to indicate lamp failure. Red pilot light. 6S6 candelabra base lampholder. Dead end enclosure. 1 FD-3J1 Transfer Relay and Lamp Failure Alarm Pilot Light Assembly Photocell (Non-Hazardous) Comes installed in FDO type enclosure, ready for installation. 120 V Only. FS601 (Class I, Division 2) As above, c/w Encapsulated Photocell for Hazardous Area installation. 120 V Only. FS601D2 Comes installed in FDO type enclosure, ready for installation. 2500 W Rated, 200 A Max. In-Rush FAA approved 30 FPM Flash Rate. TVA-FL Flasher Assembly V CSA Certification only. 1178 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 TVA Obstruction, Approach and Boundary Luminaire Dimensions V CSA Certification Only Lighting For use with Threaded Rigid Metal Conduit and IMC. Dimensions (Inches/Millimeters) A B Lighting: Enclosed and Gasketed — Visual Signal Description Catalog Number One Lamp Single 10.00/254.0 4.25/107.95 TVA1490 Twin 10.75/273.05 13.75/349.25 TVA2490 Two Lamp V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1179 Stylmaster™ Strobe Luminaires Lighting: Enclosed and Gasketed — Visual Signal Lighting Enclosed and Gasketed NEC: Pendant Mount Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4 Marine Outside Type (Saltwater) NEC: Ceiling and Wall Bracket Mount Class I, Division 2, Groups A, B, C, D NEMA 3R, 4 CEC: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III CSA Enclosure 3 Applications • Enclosed and gasketed fixtures suitable for use in: — Marine and wet locations — Industrial processing — Chemical processing — Areas where flammable gases and vapors are present under conditions defined by NEC Class I, Division 2; Class II, Division 1 and 2; and Class III • For use in areas where audible signals cannot be heard. • Used to warn of unsafe conditions and other communication needs. • Fixtures are also suited for use in non-hazardous areas where there are: — Severe weather conditions — Excessive moisture, dirt, dust — Corrosive atmospheres — High ambient temperatures are encountered • Typical applications include: — Pulp and paper mills — Processing plants — Chemical plants — Oil refineries — Foundries — Manufacturing plants — Storage areas — Marine applications Features • Modern styling, with clean-line mounting hood and prismatic glass globe, plus optional guard. • Globe seats firmly against silicone gasket in mounting hood to keep out dirt and moisture. Full threads eliminate “cross threading.” • Optional guard protects glass from damage and has exclusive snap-on attachment feature for quick installation and fast servicing. • Fixtures operate safely in high ambient temperatures. • Strobe: 65 flashes per minute. 800,000 peak candlepower. • Fixtures are complete with lamp. • Lens available in five colors: red, amber, blue, green and clear (factory installed). • Heat- and impact-resistant globes have smooth dust-resistant exterior. • Fixture is suitable for mounting globe up or globe down utilizing pendant, ceiling or wall bracket type mounts. • Minimum operating temperature is -13 °F/-25 °C. Fixtures are suitable for mounting in any position – including globe up or globe down – utilizing pendant, ceiling or wall bracket type mounts. Standard Materials • Mounting hoods: copperfree (4/10 of 1% max.) aluminum • Guards: pressure cast copperfree (4/10 of 1% max.) aluminum • Globes: prismatic glass Standard Finish • Mounting hoods and guards: powder coat epoxy Certifications and Compliances • • • • UL Standard: UL 1203, UL 1638 UL Listed: E207738 CSA Standard: C22.2 No. 25 cUL Listed: E207738 V CSA Certification only. 1180 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Stylmaster™ Strobe Luminaires Enclosed and Gasketed NEC: Ceiling and Wall Bracket Mount Class I, Division 2, Groups A, B, C, D NEMA 3R, 4 Lighting NEC: Pendant Mount Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4 Marine Outside Type (Saltwater) CEC: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III CSA Enclosure 3 Lighting: Enclosed and Gasketed — Visual Signal Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For VP Stylmaster Strobe Luminaires VP A S Series: VP - Stylmaster 75 120AC Lamp Type: S - Strobe CL G Options: G - Guard Voltage Current: 120AC - 120 Vac 240AC - 240 Vac 1248DC - 12-48 Vdc 24PDC - 24 Vdc ① 250DC - 250 Vdc Mounting Hood: A - Pendant X - Ceiling WB - Wall Bracket Hub Size: 75 - 3/4” Globe: CL - Clear AM - Amber BL - Blue GR - Green RE - Red Technical Data: Thermal Suitability of Stylmaster Strobe Operating Temperatures Ambient Temp. (°F/°C) 104/40 131/55 149/65 Class I, Division 2 Groups A,B,C,D Pendant, Ceiling and Wall Bracket T2A T2 T1 Class II, Division 1& 2 and Class III Pendant Mount T4A T4A T4 Operating Temperatures Represent the Maximum Internal Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (°C) 351- 450 326- 350 301- 325 281- 300 261- 280 231- 260 216- 230 201- 215 181- 200 166- 180 161165 136- 160 121- 135 101- 86-100 120 85 NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code. ① Diode Polarized (current limiter supplied as standard). V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1181 Stylmaster™ Strobe Luminaires Lighting: Enclosed and Gasketed — Visual Signal Lighting Enclosed and Gasketed NEC: Pendant Mount Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4 Marine Outside Type (Saltwater) NEC: Ceiling and Wall Bracket Mount Class I, Division 2, Groups A, B, C, D NEMA 3R, 4 CEC: V Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III CSA Enclosure 3 Volts Wt. (lbs/kg) Catalog Number ① Pendant — Rigid Conduit One Hub 3/4” NPT VPAS75120ACCL 120 Vac VPAS75240ACCL 240 Vac 250 Vdc 4.5/2.0 VPAS75250DCCL 12-48 Vdc VPAS751248DCCL 24 Vdc VPAS7524PDCCL ② 120 Vac VPXS75120ACCL 240 Vac VPXS75240ACCL Ceiling — Rigid Conduit Four Hubs 3/4” NPT Three Close-Up Plugs 250 Vdc 5.3/2.4 VPXS75250DCCL 12-48 Vdc VPXS751248DCCL 24 Vdc VPXS7524PDCCL ② 120 Vac VPWBS75120ACCL Wall Bracket — Rigid Conduit Four Hubs 3/4” NPT Three Close-Up Plugs VPWBS75240ACCL 240 Vac 250 Vdc 6.4/2.9 VPWBS75250DCCL 12-48 Vdc VPWBS751248DCCL 24 Vdc VPWBS7524DCCL ② Optional Aluminum Guard 1.0/0.5 VPGU-1 ① Catalog numbers shown are supplied with clear lens. To order colored lens, replace the last digits of catalog number CL with AM for amber, BL for blue, GR for green or RE for red. ② Diode Polarized (current limiter supplied as standard). V CSA Certification only. 1182 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Stylmaster™ Strobe Luminaire Replacement Parts and Dimensions Enclosed and Gasketed Lighting Replacement Lamps Fixture Type Lamp Type Voltage Base Type Strobe Xenon All Octal Socket Catalog Number S865 S865 Glass Globe Catalog Number Clear VPGL-1HR Replacement Globes and Inserts Insert (in addition to Glass Globe) Clear 59606060000 Amber 59606060001 Blue 59606060002 Green 59606060003 Red 59606060004 Dimensions Pendant Mount Ceiling Mount 7.00"/ 177.8 mm Wall Mount 10.63"/ 270.0 mm 8.75"/ 222.3 mm 5.25"/ 133.4mm 7.00"/ 177.8 mm 4.06"/ 103.1mm 3.56"/ 90.4 mm 3.05"/ 77.5 mm 3.31"/ 84.1mm 9.13"/ 231.9mm 9.13"/ 231.9mm 9.39"/ 238.5 mm 6.08"/ 154.4mm 4.75”/ 120.7 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1.88” / 47.8 mm 4.06” / 103.1 mm 4.75”/ 120.7 mm 1.88” / 47.8 mm 4.06” / 103.1 mm 1183 Lighting: Enclosed and Gasketed — Visual Signal Replacement Parts Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Wet Locations NEMA 4X Lighting: Enclosed and Gasketed — Emergency Lighting Applications • Auxiliary (emergency) lighting should be used to provide a lighted means of egress for personnel in walkways, catwalks, stairs, doorways, tunnels, ramps and aisles. • Auxiliary (emergency) lighting should be used to provide “instant on” illumination during power failures. • Enclosed and gasketed fixtures are suitable for normal and emergency use in wet locations and in a wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by NEC Class I, Division 2; Class II, Division 1 and 2; and Class III. • Suitability includes listing for normal and emergency use where there may be simultaneous exposure to combustible dusts and flammable gases and vapors. • Fixtures are also well suited for normal and emergency use in non-hazardous areas where severe weather conditions, excessive moisture, dirt, dust or corrosive atmospheres are encountered. • Typical applications include pulp and paper mills, processing plants, chemical plants, oil refineries, foundries, manufacturing plants and storage areas. Features • Modular design allows scores of fixture component combinations to meet installation and lighting needs. • Choice of optical assemblies: (1) prismatic globe; (2) enclosed reflector with sealed lens; and (3) Type V or Type II closed prismatic refractor, with or without guard. • Fluorescent light source reduces energy costs. • Fluorescent lamp life of 10,000 hours reduces relamping costs compared to incandescent. • Mounting hoods include cone-shaped pendant, standard pendant, ceiling and wall (tapped for 3/4” or 1” NPT), 25° angle stanchion and straight stanchion (both tapped for 1-1/4” or 1-1/2” NPT). • Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers. Inhibits build-up that “insulates” fixture and slows heat transfer. Also provides increased surface area for more effective heat dissipation. • Reflector choice includes standard dome and 30° angle types, both made of fiberglass reinforced white polyester. Highly resistant to unusually corrosive applications. Reflectors are vented for cooler, dirt-free operation and maintained lumen output. They secure to ballast housing with stainless steel screws, threading into stainless steel inserts. • For high corrosion resistance, fixture housing, mounting hoods and guards are diecast copperfree (4/10 of 1% max.) aluminum with baked epoxy finish, electrostatically applied for uniformity. All exposed hardware is stainless steel. • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360° compression at all points on ballast housing gasket for positive sealing. Swing-away design of captive bolt and nut simplifies servicing. • Body gaskets and globe gaskets are high-temperature silicone rubber. • All Mercmaster III mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listing in this catalog section). 1184 Prismatic Glass Globe 12” Glass Refractor Enclosed Reflector • “Instant on” nature of the fluorescent light source prevents the possibility of a complete blackout due to power failure. • Fixture (26 W or 52 W) is available for emergency operation (one battery pack provides illumination only during power outage). • Fixture (26 W or 52 W) is available for continuous operation (one AC ballast permits illumination when AC power is on and one battery pack permits illumination when AC power is interrupted). • Fixture (26 W, 52 W, 64 W or 84 W) is available for semi-continuos operation (one AC ballast permits illumination when power is on and one battery pack permits one lamp illumination when AC power is interrupted). • For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing. • Minimum operating temperature: 0 °C/32 °F. • Maximum operating temperature: 40 °C/104 °F. Battery Pack Information • • • • Sealed, maintenance-free, high-temperature nickel-cadmium. Solid state chargers sealed within the ballast case. 10 year life expectancy. Wiring instructions for “Push-To-Test” button are supplied with fixture. • Remote “Push-To-Test” switch is available to verify emergency operation (order separately, see F3-82). • Red indicator light is provided with each battery pack to indicate when the battery is charging. Standard Materials • Mounting hoods, ballast bodies and guard: diecast cooper-free aluminum (less than 4/10 of 1%) • Exposed hardware: stainless steel; latch assemblies have stainless steel bolt and captive nut; reflectors and guards attach with stainless steel screws threading into stainless steel inserts • Reflectors: fiberglass reinforced white polyester • Globe: heat- and impact-resistant internally fluted glass • Refractors: prismatic glass • Enclosed reflector: etched aluminum with sealed, tempered heat- and impact-resistant lens • Guards: stainless steel • Breather: stainless steel Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Wet Locations NEMA 4X Standard Finishes Certifications and Compliances • UL Standard: UL 1598, UL 924, UL 844 • UL Listed: E10444 • NFPA101, Life Safety Code Lighting • Mounting hoods, ballast bodies, guards: baked gray epoxy-clad finish, electrostatically applied for complete, uniform surface protection • Reflectors: white polyester finish Options • Fuses can be field-installed on Mercmaster III fixtures. Kit includes fuse block, wire connectors and screws for attaching to mounting hood. Lighting: Enclosed and Gasketed — Emergency Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide KP A Series: KP - Class I, Division 2 Groups A,B,C,D Class II, Division 1 and 2 Groups E,F,G Class III F Lamp Type: F - Fluorescent Mounting Hood: A - Pendant C - Ceiling D - Pendant Cone F - Flexible Pendant R - 90° Stanchion S - 25° Stanchion W - Wall 26 C 2 Circuit Type: C - Continuous Operation (provided with 1 AC Ballast and 1 Battery Pack). 26 W and 52 W E- Emergency Operation (provided with 1 Battery Pack). 26 W and 52 W only S - SemiContinuous (provided with 1 AC Ballast and 1 Battery Pack). 26 W, 52 W, 64 W and 84 W Lamp Wattage: 26 - 26 W (Two 13 W Lamps) 52 - 52 W (Two 26 W Lamps) 64 - 64 W (Two 32 W Lamps) 84 - 84 W (Two 42 W Lamps) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Hub Size: 2 - 3/4” 3 - 1” 4 - 1-1/4” 5 - 1-1/2” G4 G Optic: G4 - Globe R - Enclosed Reflector with Sealed Lens J2 - NEMA II Refractor J5 - NEMA V Refractor BU L Voltage: 120 through 277 Volt 50/60 Hz Guard Option: G - Guard N - No Guard Lamps: L - Lamps provided 1185 Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Wet Locations NEMA 4X Lighting: Enclosed and Gasketed — Emergency Lighting Illustrated Features Vented Reflectors Reflectors are thick, tough fiberglass- reinforced white polyester, vented for cooler operation. Quickly attach with furnished stainless steel screws. Aluminum Inner Reflector Solid aluminum inner reflector improves photometric efficiency. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. Stainless Steel Inserts Ballast bodies have stainless steel threaded inserts to receive stainless steel screws for reflectors and guard. Prevents "freezing”, allowing guards and reflectors to be easily removed and replaced at any time, without damage to the housing. Hood/Ballast Gasket Silicone rubber gasket seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Prismatic Glass Globes, Refractors and Enclosed Reflector Heat-resistant globes, refractors and enclosed reflector thread into ballast housing and seal against a high temperature silicone rubber gasket. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. 1186 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Technical Data Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Wet Locations NEMA 4X Electrical Specification for AC Operation Frequency (Hz) Type of Ballast Line Amps (A) Maximum Wattage (W/W) Catalog Number 26 W (2X 13 W) 120-277 50/60 Electronic (PLT) 0.26-0.11 30/30 KPBC26FBU 26 W (2X 13 W) 120-277 50/60 Electronic (PLT) 0.26-0.11 30/30 KPBE26FBU 26 W (2X 13 W) 120-277 50/60 Electronic (PLT) 0.26-0.11 30/30 KPBS26FBU 52 W (2X 26 W) 120-277 50/60 Electronic (PLT) 0.46-0.20 56/55 KPBC52FBU 52 W (2X 26 W) 120-277 50/60 Electronic (PLT) 0.46-0.20 56/55 KPBE52FBU 52 W (2X 26 W) 120-277 50/60 Electronic (PLT) 0.46-0.20 56/55 KPBS52FBU 64 W (2X 32 W) 120-277 50/60 Electronic (PLT) 0.58-0.26 69/67 KPBS64FBU 84 W (2X 42 W) 120-277 50/60 Electronic (PLT) 0.76-0.32 91/90 KPBS84FBU Thermal Performance of Mercmaster III Emergency Battery Pack Fixtures Lamp Watts Ambient Temp. (°F/°C) Group 26 W (2 x 13 W) 104/40 A,B,C,D 52 W (2 x 26 W) 104/40 64 W (2 x 32 W) 84 W (2 x 42 W) Hazardous Rating Class I, Division 2 Class II, Division 1 Simultaneous Exposure Class I, Division 2 / Class II, Division 1 Refractor Enclosed Reflector Supply Wire Suitability (°F/°C) T2D T2D 167/75 T2D T2D T2D 167/75 T2D T2D T2D T2D 167/75 T2D T2D T2D T2D 167/75 E,F,G T3B T3B T4 T4A 194/90 104/40 E,F,G T3B T3B T4 T4A 194/90 64 W (2 x 32 W) 104/40 E,F,G T3B T3B T4 T4A 194/90 84 W (2 x 42 W) 104/40 E,F,G T3B T3B T4 T4A 194/90 26 W (2 x 13 W) 104/40 — T1 T1 T2 T2B 230/110 52 W (2 x 26 W) 104/40 — T1 T1 T2 T2B 230/110 64 W (2 x 32 W) 104/40 — T1 T1 T2 T2B 230/110 84 W (2 x 42 W) 104/40 — T1 T1 T2 T2B 230/110 Globe Globe w/ Reflector T2D T2D A,B,C,D T2D 104/40 A,B,C,D 104/40 A,B,C,D 26 W (2 x 13 W) 104/40 52 W (2 x 26 W) “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86-100 85 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1187 Lighting: Enclosed and Gasketed — Emergency Line Voltage (V) Lighting Fixture Wattage Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Lighting: Enclosed and Gasketed — Emergency Lighting Lamp Hub Size Watts (Inches) Pendant ➍ Pendant Cone Ceiling Wall 90° Stanchion 25° Stanchion Wet Locations NEMA 4X Mode of Operation Volts Hz with Globe ➊➋ Catalog Numbers with Type V 12” Refractor ➊➋➌ with Enclosed Reflector ➊➋➌ 26 3/4 Continuous 120-277 50/60 KPAF26C2G4NBUL KPAF26C2J5NBUL KPAF26C2RNBUL 26 1 Continuous 120-277 50/60 KPAF26C3G4NBUL KPAF26C3J5NBUL KPAF26C3RNBUL 26 3/4 Semi-Continuous 120-277 50/60 KPAF26S2G4NBUL KPAF26S2J5NBUL KPAF26S2RNBUL 26 1 Semi-Continuous 120-277 50/60 KPAF26S3G4NBUL KPAF26S3J5NBUL KPAF26S3RNBUL 26 3/4 120-277 50/60 KPAF26E2G4NBUL KPAF26E2J5NBUL KPAF26E2RNBUL Emergency 26 1 Emergency 120-277 50/60 KPAF26E3G4NBUL KPAF26E3J5NBUL KPAF26E3RNBUL 26 3/4 Continuous 120-277 50/60 KPDF26C2G4NBUL KPDF26C2J5NBUL KPDF26C2RNBUL 26 1 Continuous 120-277 50/60 KPDF26C3G4NBUL KPDF26C3J5NBUL KPDF26C3RNBUL 26 3/4 Semi-Continuous 120-277 50/60 KPDF26S2G4NBUL KPDF26S2J5NBUL KPDF26S2RNBUL 26 1 Semi-Continuous 120-277 50/60 KPDF26S3G4NBUL KPDF26S3J5NBUL KPDF26S3RNBUL 26 3/4 KPDF26E2G4NBUL KPDF26E2J5NBUL KPDF26E2RNBUL Emergency 120-277 50/60 26 1 Emergency 120-277 50/60 KPDF26E3G4NBUL KPDF26E3J5NBUL KPDF26E3RNBUL 26 3/4 Continuous 120-277 50/60 KPCF26C2G4NBUL KPCF26C2J5NBUL KPCF26C2RNBUL 26 1 Continuous 120-277 50/60 KPCF26C3G4NBUL KPCF26C3J5NBUL KPCF26C3RNBUL 26 3/4 Semi-Continuous 120-277 50/60 KPCF26S2G4NBUL KPCF26S2J5NBUL KPCF26S2RNBUL 26 1 Semi-Continuous 120-277 50/60 KPCF26S3G4NBUL KPCF26S3J5NBUL KPCF26S3RNBUL 26 3/4 KPCF26E2G4NBUL KPCF26E2J5NBUL KPCF26E2RNBUL Emergency 120-277 50/60 26 1 Emergency 120-277 50/60 KPCF26E3G4NBUL KPCF26E3J5NBUL KPCF26E3RNBUL 26 3/4 Continuous 120-277 50/60 KPWF26C2G4NBUL KPWF26C2J5NBUL KPWF26C2RNBUL Continuous 26 1 120-277 50/60 KPWF26C3G4NBUL KPWF26C3J5NBUL KPWF26C3RNBUL 26 3/4 Semi-Continuous 120-277 50/60 KPWF26S2G4NBUL KPWF26S2J5NBUL KPWF26S2RNBUL 26 1 Semi-Continuous 120-277 50/60 KPWF26S3G4NBUL KPWF26S3J5NBUL KPWF26S3RNBUL 26 3/4 Emergency 120-277 50/60 KPWF26E2G4NBUL KPWF26E2J5NBUL KPWF26E2RNBUL 26 1 Emergency 120-277 50/60 KPWF26E3G4NBUL KPWF26E3J5NBUL KPWF26E3RNBUL 26 1-1/4 Continuous 120-277 50/60 KPRF26C4G4NBUL KPRF26C4J5NBUL KPRF26C4RNBUL 26 1-1/2 Continuous 120-277 50/60 KPRF26C5G4NBUL KPRF26C5J5NBUL KPRF26C5RNBUL 26 1-1/4 Semi-Continuous 120-277 50/60 KPRF26S4G4NBUL KPRF26S4J5NBUL KPRF26S4RNBUL 26 1-1/2 Semi-Continuous 120-277 50/60 KPRF26S5G4NBUL KPRF26S5J5NBUL KPRF26S5RNBUL 26 1-1/4 Emergency 120-277 50/60 KPRF26E4G4NBUL KPRF26E4J5NBUL KPRF26E4RNBUL 26 1-1/2 Emergency 120-277 50/60 KPRF26E5G4NBUL KPRF26E5J5NBUL KPRF26E5RNBUL 26 1-1/4 Continuous 120-277 50/60 KPSF26C4G4NBUL KPSF26C4J5NBUL KPSF26C4RNBUL 26 1-1/2 Continuous 120-277 50/60 KPSF26C5G4NBUL KPSF26C5J5NBUL KPSF26C5RNBUL 26 1-1/4 Semi-Continuous 120-277 50/60 KPSF26S4G4NBUL KPSF26S4J5NBUL KPSF26S4RNBUL 26 1-1/2 Semi-Continuous 120-277 50/60 KPSF26S5G4NBUL KPSF26S5J5NBUL KPSF26S5RNBUL 26 1-1/4 Emergency 120-277 50/60 KPSF26E4G4NBUL KPSF26E4J5NBUL KPSF26E4RNBUL 26 1-1/2 Emergency 120-277 50/60 KPSF26E5G4NBUL KPSF26E5J5NBUL KPSF26E5RNBUL NOTE: “Continuous operation” means 2 lamps operate when AC power is present and continue to operate during AC power failure. “Emergency operation” means lamps do not operate when AC power is present, but 2 lamps operate from the DC battery pack only during AC power failure. “Semi-continuous” means 2 lamps operate when AC power is present and 1 lamp continues to operate during AC power failure. ➊ For fixtures with guard, substitute G for N before adding voltage suffix. ➋ Lamp included as standard. ➌ To order fixture with NEMA type 2 refractor, change final digit J5 in catalog number to J2. ➍ One hub, rigid or flexible mounting. 1188 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Lamp Hub Size Watts (Inches) Ceiling Wall 90° Stanchion 25° Stanchion Volts Hz with Globe ➊➋ Catalog Numbers with Type V 12” Refractor ➊➋➌ with Enclosed Reflector ➊➋➌ 52 3/4 Continuous 120-277 50/60 KPAF52C2G4NBUL KPAF52C2J5NBUL KPAF52C2RNBUL 52 1 Continuous 120-277 50/60 KPAF52C3G4NBUL KPAF52C3J5NBUL KPAF52C3RNBUL 52 3/4 Semi-Continuous 120-277 50/60 KPAF52S2G4NBUL KPAF52S2J5NBUL KPAF52S2RNBUL 52 1 Semi-Continuous 120-277 50/60 KPAF52S3G4NBUL KPAF52S3J5NBUL KPAF52S3RNBUL 52 3/4 KPAF52E2G4NBUL KPAF52E2J5NBUL KPAF52E2RNBUL Emergency 120-277 50/60 52 1 Emergency 120-277 50/60 KPAF52E3G4NBUL KPAF52E3J5NBUL KPAF52E3RNBUL 52 3/4 Continuous 120-277 50/60 KPDF52C2G4NBUL KPDF52C2J5NBUL KPDF52C2RNBUL 52 1 Continuous 120-277 50/60 KPDF52C3G4NBUL KPDF52C3J5NBUL KPDF52C3RNBUL 52 3/4 Semi-Continuous 120-277 50/60 KPDF52S2G4NBUL KPDF52S2J5NBUL KPDF52S2RNBUL 52 1 Semi-Continuous 120-277 50/60 KPDF52S3G4NBUL KPDF52S3J5NBUL KPDF52S3RNBUL 52 3/4 KPDF52E2G4NBUL KPDF52E2J5NBUL KPDF52E2RNBUL Emergency 120-277 50/60 52 1 Emergency 120-277 50/60 KPDF52E3G4NBUL KPDF52E3J5NBUL KPDF52E3RNBUL 52 3/4 Continuous 120-277 50/60 KPCF52C2G4NBUL KPCF52C2J5NBUL KPCF52C2RNBUL 52 1 Continuous 120-277 50/60 KPCF52C3G4NBUL KPCF52C3J5NBUL KPCF52C3RNBUL 52 3/4 Semi-Continuous 120-277 50/60 KPCF52S2G4NBUL KPCF52S2J5NBUL KPCF52S2RNBUL 52 1 Semi-Continuous 120-277 50/60 KPCF52S3G4NBUL KPCF52S3J5NBUL KPCF52S3RNBUL 52 3/4 Emergency 120-277 50/60 KPCF52E2G4NBUL KPCF52E2J5NBUL KPCF52E2RNBUL 52 1 Emergency 120-277 50/60 KPCF52E3G4NBUL KPCF52E3J5NBUL KPCF52E3RNBUL 52 3/4 Continuous 120-277 50/60 KPWF52C2G4NBUL KPWF52C2J5NBUL KPWF52C2RNBUL Continuous 52 1 120-277 50/60 KPWF52C3G4NBUL KPWF52C3J5NBUL KPWF52C3RNBUL 52 3/4 Semi-Continuous 120-277 50/60 KPWF52S2G4NBUL KPWF52S2J5NBUL KPWF52S2RNBUL 52 1 Semi-Continuous 120-277 50/60 KPWF52S3G4NBUL KPWF52S3J5NBUL KPWF52S3RNBUL 52 3/4 Emergency 120-277 50/60 KPWF52E2G4NBUL KPWF52E2J5NBUL KPWF52E2RNBUL 52 1 Emergency 120-277 50/60 KPWF52E3G4NBUL KPWF52E3J5NBUL KPWF52E3RNBUL 52 1-1/4 Continuous 120-277 50/60 KPRF52C4G4NBUL KPRF52C4J5NBUL KPRF52C4RNBUL 52 1-1/2 Continuous 120-277 50/60 KPRF52C5G4NBUL KPRF52C5J5NBUL KPRF52C5RNBUL 52 1-1/4 Semi-Continuous 120-277 50/60 KPRF52S4G4NBUL KPRF52S4J5NBUL KPRF52S4RNBUL 52 1-1/2 Semi-Continuous 120-277 50/60 KPRF52S5G4NBUL KPRF52S5J5NBUL KPRF52S5RNBUL 52 1-1/4 Emergency 120-277 50/60 KPRF52E4G4NBUL KPRF52E4J5NBUL KPRF52E4RNBUL 52 1-1/2 Emergency 120-277 50/60 KPRF52E5G4NBUL KPRF52E5J5NBUL KPRF52E5RNBUL 52 1-1/4 Continuous 120-277 50/60 KPSF52C4G4NBUL KPSF52C4J5NBUL KPSF52C4RNBUL 52 1-1/2 Continuous 120-277 50/60 KPSF52C5G4NBUL KPSF52C5J5NBUL KPSF52C5RNBUL 52 1-1/4 Semi-Continuous 120-277 50/60 KPSF52S4G4NBUL KPSF52S4J5NBUL KPSF52S4RNBUL 52 1-1/2 Semi-Continuous 120-277 50/60 KPSF52S5G4NBUL KPSF52S5J5NBUL KPSF52S5RNBUL 52 1-1/4 Emergency 120-277 50/60 KPSF52E4G4NBUL KPSF52E4J5NBUL KPSF52E4RNBUL 52 1-1/2 Emergency 120-277 50/60 KPSF52E5G4NBUL KPSF52E5J5NBUL KPSF52E5RNBUL NOTE: “Continuous operation” means 2 lamps operate when AC power is present and continue to operate during AC power failure. “Emergency operation” means lamps do not operate when AC power is present, but 2 lamps operate from the DC battery pack only during AC power failure. “Semi-continuous” means 2 lamps operate when AC power is present and 1 lamp continues to operate during AC power failure. ➊ For fixtures with guard, substitute G for N before adding voltage suffix. ➋ Lamp included as standard. ➌ To order fixture with NEMA type 2 refractor, change final digit J5 in catalog number to J2. ➍ One hub, rigid or flexible mounting. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1189 Lighting: Enclosed and Gasketed — Emergency Pendant Cone Mode of Operation Lighting Pendant ➍ Wet Locations NEMA 4X Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Lighting: Enclosed and Gasketed — Emergency Lighting Lamp Hub Size Watts (Inches) Pendant ➍ Pendant Cone Ceiling Wall 90° Stanchion 25° Stanchion Wet Locations NEMA 4X Mode of Operation Volts Hz with Globe ➊➋ Catalog Numbers with Type V 12” Refractor ➊➋➌ with Enclosed Reflector ➊➋➌ 64 3/4 Semi-Continuous 120-277 50/60 KPAF64S2G4NBUL KPAF64S2J5NBUL KPAF64S2RNBUL 64 1 Semi-Continuous 120-277 50/60 KPAF64S3G4NBUL KPAF64S3J5NBUL KPAF64S3RNBUL 64 3/4 Semi-Continuous 120-277 50/60 KPDF64S2G4NBUL KPDF64S2J5NBUL KPDF64S2RNBUL 64 1 Semi-Continuous 120-277 50/60 KPDF64S3G4NBUL KPDF64S3J5NBUL KPDF64S3RNBUL 64 3/4 Semi-Continuous 120-277 50/60 KPCF64S2G4NBUL KPCF64S2J5NBUL KPCF64S2RNBUL 64 1 Semi-Continuous 120-277 50/60 KPCF64S3G4NBUL KPCF64S3J5NBUL KPCF64S3RNBUL 64 3/4 Semi-Continuous 120-277 50/60 KPWF64S2G4NBUL KPWF64S2J5NBUL KPWF64S2RNBUL 64 1 Semi-Continuous 120-277 50/60 KPWF64S3G4NBUL KPWF64S3J5NBUL KPWF64S3RNBUL 64 1-1/4 Semi-Continuous 120-277 50/60 KPRF64S4G4NBUL KPRF64S4J5NBUL KPRF64S4RNBUL 64 1-1/2 Semi-Continuous 120-277 50/60 KPRF64S5G4NBUL KPRF64S5J5NBUL KPRF64S5RNBUL 64 1-1/4 Semi-Continuous 120-277 50/60 KPSF64S4G4NBUL KPSF64S4J5NBUL KPSF64S4RNBUL 64 1-1/2 Semi-Continuous 120-277 50/60 KPSF64S5G4NBUL KPSF64S5J5NBUL KPSF64S5RNBUL NOTE: “Continuous operation” means 2 lamps operate when AC power is present and continue to operate during AC power failure. “Emergency operation” means lamps do not operate when AC power is present, but 2 lamps operate from the DC battery pack only during AC power failure. “Semi-continuous” means 2 lamps operate when AC power is present and 1 lamp continues to operate during AC power failure. ➊ For fixtures with guard, substitute G for N before adding voltage suffix. ➋ Lamp included as standard. ➌ To order fixture with NEMA type 2 refractor, change final digit J5 in catalog number to J2. ➍ One hub, rigid or flexible mounting. 1190 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Lamp Hub Size Watts (Inches) Ceiling Wall 90° Stanchion 25° Stanchion Volts Hz with Globe ➊➋ Catalog Numbers with Type V 12” Refractor ➊➋➌ with Enclosed Reflector ➊➋➌ 84 3/4 Semi-Continuous 120-277 50/60 KPAF84S2G4NBUL KPAF84S2J5NBUL KPAF84S2RNBUL 84 1 Semi-Continuous 120-277 50/60 KPAF84S3G4NBUL KPAF84S3J5NBUL KPAF84S3RNBUL 84 3/4 Semi-Continuous 120-277 50/60 KPDF84S2G4NBUL KPDF84S2J5NBUL KPDF84S2RNBUL 84 1 Semi-Continuous 120-277 50/60 KPDF84S3G4NBUL KPDF84S3J5NBUL KPDF84S3RNBUL 84 3/4 Semi-Continuous 120-277 50/60 KPCF84S2G4NBUL KPCF84S2J5NBUL KPCF84S2RNBUL 84 1 Semi-Continuous 120-277 50/60 KPCF84S3G4NBUL KPCF84S3J5NBUL KPCF84S3RNBUL 84 3/4 Semi-Continuous 120-277 50/60 KPWF84S2G4NBUL KPWF84S2J5NBUL KPWF84S2RNBUL 84 1 Semi-Continuous 120-277 50/60 KPWF84S3G4NBUL KPWF84S3J5NBUL KPWF84S3RNBUL 84 1-1/4 Semi-Continuous 120-277 50/60 KPRF84S4G4NBUL KPRF84S4J5NBUL KPRF84S4RNBUL 84 1-1/2 Semi-Continuous 120-277 50/60 KPRF84S5G4NBUL KPRF84S5J5NBUL KPRF84S5RNBUL 84 1-1/4 Semi-Continuous 120-277 50/60 KPSF84S4G4NBUL KPSF84S4J5NBUL KPSF84S4RNBUL 84 1-1/2 Semi-Continuous 120-277 50/60 KPSF84S5G4NBUL KPSF84S5J5NBUL KPSF84S5RNBUL NOTE: “Continuous operation” means 2 lamps operate when AC power is present and continue to operate during AC power failure. “Emergency operation” means lamps do not operate when AC power is present, but 2 lamps operate from the DC battery pack only during AC power failure. “Semi-continuous” means 2 lamps operate when AC power is present and 1 lamp continues to operate during AC power failure. ➊ For fixtures with guard, substitute G for N before adding voltage suffix. ➋ Lamp included as standard. ➌ To order fixture with NEMA type 2 refractor, change final digit J5 in catalog number to J2. ➍ One hub, rigid or flexible mounting. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1191 Lighting: Enclosed and Gasketed — Emergency Pendant Cone Mode of Operation Lighting Pendant ➍ Wet Locations NEMA 4X Mercmaster™ III Emergency Battery Pack Mounting Hoods and Ballast Bodies Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Wet Locations NEMA 4X Mounting Hoods Description Hub Size (Inches) Catalog Number Lighting Pendant One Hub, Rigid Mounting One Hub, Flexible Mounting 3/4 KPA-75 1 KPA-100 3/4 KPAF-75 1 KPAF-100 3/4 KPCH-75 1 KPCH-100 3/4 KPC-75 1 KPC-100 3/4 KPWB-75 1 KPWB-100 1-1/4 KPS-125 1-1/2 KPS-150 1-1/4 KPST-125 1-1/2 KPST-150 Lighting: Enclosed and Gasketed — Emergency Pendant Cone One Hub, Rigid Mounting Ceiling Five Hubs, Four Close-Up Plugs Wall Five Hubs, Four Close-Up Plugs 25° Stanchion One Hub 90° Stanchion One Hub Ballast Bodies 1192 Lamp Wattage Mode of Operation Voltage Hz Ballast Body Catalog Number 26 Continuous 120-277 50/60 KPBC26FBU 26 Emergency 120-277 50/60 KPBE26FBU 26 Semi Continuous 120-277 50/60 KPBS26FBU 52 Continuous 120-277 50/60 KPBC52FBU 52 Emergency 120-277 50/60 KPBE52FBU 52 Semi Continuous 120-277 50/60 KPBS52FBU 64 Semi-Continuous 120-277 50/60 KPBS64FBU 84 Semi-Continuous 120-277 50/60 KPBS84FBU Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Accessories Enclosed and Gasketed. For Hazardous and Wet Locations Simultaneous Exposure Class I, Division 2, Class II, Division 1 Class I, Division 2, Group A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Item Wet Locations NEMA 4X Description Catalog Number White Polyester Reflectors For use with globe fixtures mm Standard Dome17. 18.70" 06 " 18.70" 17 CMR4-ST * 30° Angle CMR4-AN Lighting 117 .06 4337.0.066" .3 "/ " 17 18.70"/ 18.70" 18.70" 475.0 mm Standard Dome 30° Angle 7-11/16" 7-11/16" " .06 Prismatic Glass Globes 7-11/16" 11-5/16"11-5/16" 11-5/16" 11.31”11-5/16" /287.3 Heat-resistant Lighting: Enclosed and Gasketed — Emergency 7.69" /195.3 mm 7-11/16" VPGL-4HR Clear mm 6-1/4" 6-1/4" 6-1/4" 6.25” /158.8 mm 7.69" 6-1/4" 7.69" Closed Prismatic Glass Refractors 7.69" 7.69" mm 7.69”/195.3 11.50" 11.50" 11.50" 11.50" 11.58”/294.1 mm NEMA Type II KPRF400-2 NEMA Type V KPRF400-5 Heat- and impact-resistant glass lens KPR-4HB Globe Guard KPGU400 Refractor Guard KPBG12 Enclosed Reflector Guard GHB7000-NG 12.05" 12.05" 12.05" 12.05”/306.1 12.05" mm 7.69”/195.3 7.69" mm Enclosed Reflector Assembly 7.69" 7.69" 7.69" 11.50" 16.38" 11.50" 11.50" 11.50" 11.50”/292.1 mm 16.38" 16.38" 16.38" 16.38”/ 416.1mm Stainless Steel Guards Globe Refractor Enclosed Reflector Photocontrol Factory-Installed † Voltage Range Mercmaster III Wall Mounting with Photocontrol Factory Installed Field-Installed Suffix Designation 120 V, 50/60 Hz H1 208 V, 50/60 Hz H2 240 V, 50/60 Hz H3 277 V, 50/60 Hz H4 Max. Current Voltage Range Catalog Number 8.3 A 120 V, 50/60 Hz PC120D2 3.5 A 208-277 V, 50/60 Hz PC247D2 Photocontrol for Field Installation * Consult factory if used with KPWB or KPST mounting hoods. † Add to fixture catalog after voltage; i.e.: KPWF26C2G4NBULH1. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1193 Mercmaster™ III Emergency Battery Pack Accessories Enclosed and Gasketed. For Hazardous and Wet Locations Item Description Catalog Number Three-Way Exit Sign EXR400 Lighting Epoxy enameled steel — 10” high red lettering Mounts to fixture units in place of guard Replacement Optic Gaskets Silicone Rubber KRF-GK Lighting: Enclosed and Gasketed — Emergency Globe, Refractor and Enclosed Refractor Gasket Replacement Lamp PLC PLT Lamp Type Lamp Base Wattage Catalog Number PL-C G24Q-1 13 PLC134 PL-T G24q-4 26 PLT26 PL-T G24q-4 32 PLT32 PL-T G24q-4 42 PLT42 Replacement Socket PLC For 26 W (2 x 13 W) PLC Lamps PLC13RS For 26 W, 32 W and 42 W PLT Lamps listed above PLT32RS PLT Retrofit Pendant Mounting Adapter Permits use of Mercmaster III pendant hood with 3/4” hub on existing V-51 mounting hood. LPAD-1 Fuse Kit 2-amp time delay fuse 1194 F2 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFDB™ Factory Sealed Push-To-Test Station Explosionproof, Dust-Ignitionproof Applications Description Dead-End Feed-Thru 1 Circuit Universal EFDB150-U1-TEST EFDCB150-U1-TEST EFDB175-U1-TEST EFDCB175-U1-TEST EFDB110-U1-TEST EFDCB110-U1-TEST Single Gang * Momentary Contact Features 1/2 3/4 1 Replacement Parts for Push-to-Test Switch Description Catalog Number Complete Cover Assy EFKB-U1-TEST Push Button Only SPBBU1Q Test Legend Plate SNPTESTQ 12-24 x 1 (4) Screws B A 4.63”/ 117.6 mm 5.41”/ 137.4 mm 6.38”/ 162.1 mm 9/32 Dia. Hole 2.31"/ 58.7 mm 3.00”/ 76.2 mm 5/16 Dia. (2) Mtg. Holes 5.00”/ 127 mm C EFDB Single Gang Push-To-Test Control Station Dimensions in Inches/Millimeters B Hub Size (Inches) A 1/2 & 3/4 5.38/136.7 6.13/155.7 0.78/19.8 1 5.50/139.7 6.31/160.3 0.94/23.9 C * Malleable iron body and aluminum cover. For aluminum body, add suffix -A. For Class I, Group B, external seals must be installed at each conduit entrance. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1195 Lighting: Enclosed and Gasketed — Emergency • Eliminates need for adding sealing fittings and compound at each conduit entrance (Groups C and D). • Heavy-duty, 10 ampere 600 V rated. • Smooth, rounded integral bushing in each EFDB hub protects conductor insulation. • Accurately tapped, tapered hubs for tight, rigid joints and ground continuity. • Stainless steel push button shaft operators within stainless steel bushing assures long, maintenance-free operation. • Push button contacts are silver cadmium oxide which are “sealed” in lower phenolic chamber isolated from corrosive elements. Assures positive contact and long, trouble-free operation. • Enclosed stainless steel helper spring prevents accidental operation of push button in severe vibration installations. • Corrosion-resistant captive stainless steel hex-head cap screws hold EFKB cover to body. • All EFDB front-operated push buttons are supplied with lockout type guards as standard. Hole in guard will accept locks with up to 1/4” hasp. Permits locking of push button to prevent unauthorized operation. • Clearly marked terminals with brass screws assure quick, easy wiring. Catalog Number Hub Size (Inches) Lighting • Push-to-test switch permits interruption of AC power to fixture to provide verification in an emergency lighting system that battery packs and lamps are functioning properly. Mercmaster™ III Emergency Battery Pack Dimensions and Weights Enclosed and Gasketed. For Hazardous and Wet Locations Ceiling with Refractor Enclosed Reflector and Guards Pendant with Globe, Guard and Reflectors Lighting 13.44"/ 341.4 mm 13.44"/ 341.4 mm 17.23"/ 437.6 mm 11.21"/ 284.7 mm 9.79"/ 248.6 mm 11.82"/ 300.2 mm 6.04" / 153.4 mm 11.65"/ 295.9 mm --1 7.0 6" /4 33 .3 mm 10.35"/ 262.9 mm 11.44"/ 290.6 mm 12.38"/ 314.5 mm Dia 12.09"/ 307.1 mm 10.38"/ 263.7 mm . 12.12"/ 307.8 mm 18.70"/ 475.0 mm Dia. 16.38"/ 416.1 mm 8.80"/ 223.5 mm 12.25"/ 311.2 mm Dia. 25° Stanchion Wall 0.31"/ 7.9 mm Dia / 27" m 15. .9 m 7 8 3 Cone 17.00"/ 431.8 mm 13.44"/ 341.4 mm 5"/ 9.2.0 mm "/ 8 235 8.1 mm .7 207 12 4. 0. 75 7 "/ m m 4.06"/ 103.1 mm Lighting: Enclosed and Gasketed — Emergency 11.0"/ 279.4 mm 10.25"/ 260.4 mm 10.77"/ 273.6 mm 90° Stanchion / 07" m 12. .8 m 6 30 1.38"/ 35.1 mm 13.08"/ 332.2 mm 15.63"/ 422.4 mm 12.12"/ 307.8 mm Mercmaster III – Emergency Ballast and Accessory Weights * Ballast Housing (Wt. lbs/kg) Lamp Watts Continuous SemiContinuous Emergency 26 23.00/10.4 23.00/10.4 23.00/10.4 52 23.00/10.4 23.00/10.4 23.00/10.4 64 — 23.00/10.4 — 84 — 23.00/10.4 — Mounting Hoods Wt. (lbs/kg) Refractor, Globe, Reflector and Guards Wt. (lbs/kg) Pendant 2.25/1.0 Standard Dome 3.50/1.6 Pendant Cone 2.50/1.1 30° Angle 3.50/1.6 Ceiling 3.00/1.4 Glass Globe 7.00/3.2 Wall 4.00/1.8 Globe Guard 25° Stanchion 3.25/1.5 12” Glass Refractor 90° Stanchion 3.75/1.7 Refractor Guard Enclosed Reflector Enclosed Reflector Guard 3.00/1.4 12.00/5.4 4.50/2.0 11.00/5.0 2.00/0.9 * Weights are approximate. 1196 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Photometric Data Enclosed and Gasketed. For Hazardous and Wet Locations Total Luminaire Efficiency = 58.3% CIE Type – Semi-Direct Plane Spacing Criteria 2.98 90-270 2.98 Diagonal 2.94 Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Lumens 4.21 14.03 29.45 52.29 76.42 97.89 115.41 126.24 130.30 128.10 116.00 87.78 120-130 130-140 140-150 150-160 160-170 170-180 49.16 17.40 3.58 0.35 0.02 0.00 Total Luminaire Efficiency = 77.4% CIE Type – Direct Plane Spacing Criteria 0-180 1.68 90-270 1.68 Diagonal 1.82 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lumens 27.68 83.17 138.57 194.85 240.48 264.71 251.68 154.88 37.26 0.55 0.00 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 80 70 64 55 48 43 39 36 33 30 28 26 24 0 1 2 3 4 5 6 7 8 9 10 50 64 51 42 36 31 27 24 21 19 17 16 30 64 47 37 30 25 21 18 16 14 12 11 70 10 64 44 33 26 21 17 14 12 10 9 8 70 60 51 45 40 36 33 30 27 25 24 22 50 60 47 39 33 29 25 22 20 18 16 15 30 60 44 34 28 23 20 17 15 13 12 10 50 10 60 41 31 24 19 16 13 11 10 8 7 50 52 40 33 28 24 21 19 17 15 14 13 30 52 38 30 24 20 17 15 13 11 10 9 30 10 52 35 26 21 17 14 11 10 8 7 6 50 45 34 28 24 20 18 16 14 13 12 11 30 45 32 25 20 17 14 12 11 9 8 8 10 10 45 30 22 17 14 11 10 8 7 6 5 50 39 29 23 19 16 14 13 12 10 10 9 30 39 27 21 17 14 12 10 9 8 7 6 0 10 39 25 19 14 11 9 8 7 6 5 4 0 36 23 16 12 9 7 6 5 4 4 3 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 47.69 99.98 274.29 646.24 % Lamp 2.6 5.6 15.2 35.9 % Fixture 4.5 9.5 26.2 61.6 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 331.87 381.04 402.02 402.40 1048.64 % Lamp 18.4 21.2 22.3 22.4 58.3 % Fixture 31.6 36.3 36.3 38.4 100.0 REPORT NUMBER: KPBF26BU_ST 26 W (two 13 W PLT lamps) Fluorescent Fixture with Globe and Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 92 83 74 66 60 55 50 46 43 40 37 50 92 78 67 57 50 44 39 35 31 29 26 30 92 74 60 50 42 36 31 27 24 22 20 70 10 92 71 55 44 36 30 26 22 19 17 15 70 90 81 72 64 58 53 49 45 41 39 36 50 90 77 65 56 49 43 38 34 31 28 26 30 90 73 59 49 41 35 31 27 24 22 19 50 10 90 70 55 44 36 30 25 22 19 17 15 50 86 73 62 53 46 41 36 33 30 27 25 30 86 70 57 48 40 34 30 26 24 21 19 30 10 86 68 53 43 35 30 25 22 19 17 15 50 82 70 59 51 45 39 35 32 29 26 24 30 82 68 55 46 39 34 29 26 23 21 19 10 10 82 65 52 42 35 29 25 22 19 17 15 50 79 67 57 49 43 38 34 31 28 25 23 30 79 65 54 45 38 33 29 25 23 20 19 0 10 79 63 51 41 34 29 25 21 19 17 15 0 77 62 49 39 32 27 23 20 17 15 13 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumens 249.42 444.27 949.47 1393.29 % Lamp 13.9 24.7 52.7 77.4 % Fixture 17.9 31.9 68.1 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.55 0.55 0.55 0.55 1393.83 % Lamp 0.0 0.0 0.0 0.0 77.4 % Fixture 0.1 0.1 0.1 0.1 100.0 1197 Lighting: Enclosed and Gasketed — Emergency Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lighting 0-180 REPORT NUMBER: KPBF26BU_G 26 W (two 13 W PLT lamps) Fluorescent Fixture with Globe only Mercmaster™ III Emergency Battery Pack Photometric Data Enclosed and Gasketed. For Hazardous and Wet Locations Total Luminaire Efficiency = 90.2% CIE Type – Semi-Direct Lighting: Enclosed and Gasketed — Emergency Lighting Plane Spacing Criteria 0-180 2.72 90-270 2.72 Diagonal 2.72 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lumens 23.61 79.09 165.61 289.36 418.89 535.78 628.00 682.79 696.63 676.63 612.00 481.82 120-130 130-140 140-150 150-160 160-170 170-180 304.45 133.76 39.22 5.66 0.24 0.00 Total Luminaire Efficiency = 72.8% CIE Type – Direct Plane Spacing Criteria 0-180 1.66 90-270 1.66 Diagonal 1.80 Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lumens 88.11 264.99 444.26 624.25 769.77 853.68 821.26 573.91 212.45 4.66 0.00 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 1198 REPORT NUMBER: KPBF84BU_G 84 W (two 42 W PLT lamps) Fluorescent Fixture with Globe Only Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 99 85 75 67 61 55 50 46 43 40 37 50 99 78 65 56 48 42 37 33 30 27 25 30 99 73 57 47 39 33 29 25 22 19 17 70 10 99 68 51 40 32 26 22 19 16 14 12 70 93 79 69 62 56 51 46 43 39 37 34 50 93 73 61 52 45 39 35 31 28 25 23 30 93 68 53 44 36 31 27 23 20 18 16 50 10 93 63 47 37 30 25 21 18 15 13 12 50 81 62 52 44 38 33 29 26 24 22 20 30 81 58 46 37 31 26 23 20 17 16 14 30 10 81 55 41 32 26 21 18 15 13 11 10 50 70 53 43 36 31 28 24 22 20 18 17 30 70 50 39 31 26 22 19 17 15 13 12 10 10 70 47 35 27 22 18 15 13 11 9 8 50 60 44 35 30 25 22 20 18 16 15 14 30 60 42 32 26 21 18 15 14 12 11 10 0 10 60 39 29 22 18 14 12 10 9 8 7 0 55 35 25 18 14 11 9 8 7 6 5 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 268.3 557.66 1512.33 3519.72 % Lamp 4.2 8.7 23.6 55.0 % Fixture 4.6 9.7 26.2 61.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1770.44 2074.89 2247.86 2253.77 5773.48 % Lamp 27.7 32.4 35.1 35.2 90.2 % Fixture 30.7 35.9 35.9 39.0 100.0 REPORT NUMBER: KPBF84BU_ST 84 W (two 42 W PLT lamps) Fluorescent Fixture with Globe and Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw 70 0 87 1 77 2 69 3 62 4 56 5 51 6 47 7 43 8 40 9 37 10 35 80 50 30 87 87 73 69 61 55 53 46 46 38 40 33 36 28 32 25 29 22 26 20 24 18 10 87 65 50 40 33 27 23 20 17 15 14 70 85 75 67 60 54 49 45 42 38 36 34 70 50 30 85 85 71 67 60 55 51 45 45 38 39 32 35 28 31 25 28 22 26 20 24 18 10 85 64 50 40 32 27 23 20 17 15 14 50 81 68 57 49 43 38 34 30 27 25 23 50 30 81 65 53 44 37 31 27 24 21 19 17 10 81 62 49 39 32 27 23 20 17 15 14 50 77 65 55 47 41 36 32 29 26 24 22 30 30 77 62 51 42 36 31 27 24 21 19 17 10 77 60 47 38 31 26 23 20 17 15 14 50 74 62 52 45 39 35 31 28 25 23 22 10 30 74 60 49 41 35 30 26 23 21 19 17 10 74 58 46 37 31 26 22 19 17 15 14 0 0 73 57 45 36 29 24 21 18 15 14 12 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 797.37 1421.62 3045.07 4652.69 % Lamp 12.5 22.2 47.6 72.7 % Fixture 17.1 30.5 65.4 99.9 Zone Lumens 90-120 4.66 90-130 4.66 90-150 4.66 90-180 4.66 0-180 4657.35 % Lamp 0.1 0.1 0.1 0.1 72.8 % Fixture 0.1 0.1 0.1 0.1 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mercmaster™ III Emergency Battery Pack Lumen Curves Enclosed and Gasketed. For Hazardous and Wet Locations BHD65U Lumen Curve One Lamp PL-T 42 W In Emergency Mode BHD65U Lumen Curve One Lamp PL-T 32 W In Emergency Mode 400 300 Lighting 350 250 300 250 Lumens Lumens 200 150 200 100 50 0 50 0 0 10 20 30 40 50 60 70 80 90 80 90 Discharge time (minutes) 0 10 20 30 40 50 60 70 80 90 Discharge time (minutes) BHD65U Lumen Curve Two Lamp PL-T 26 W In Emergency Mode 450 400 350 Lumens 300 250 200 150 100 50 0 0 10 20 30 40 50 60 70 Discharge time (minutes) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1199 Lighting: Enclosed and Gasketed — Emergency 150 100 N2LS™ Series Emergency Luminaires Enclosed and Gasketed Non-Metallic Emergency Lighting Systems with Remote or Direct Mounted Lamps. Class I, Division 2, Groups B, C, D Class I, Zone 2, Group IIB + H2 NEMA 3R Lighting: Enclosed and Gasketed — Emergency Lighting Applications • Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions defined by NEC as Class I, Division 2, Groups B, C and D and Class I, Zone 2, Group II B + H2. • Typical applications include manufacturing plants, refineries, petrochemical and chemical plants, waste and sewerage treatment facilities, food processing facilities, and other industrial manufacturing or process facilities subject to wet or corrosive conditions. • Non-hazardous areas where dirt, dust or corrosion would reduce life of ordinary emergency lighting systems. Features • Certified for use in Class I, Division 2, Groups B, C, D; Class I, Zone 2, Group II B + H2 Hazardous Locations. • Enclosures are Type 3R (raintight) rated and suited for operation in highly corrosive and wet locations. • The electronics consist of a solid-state charger, transfer circuit and low voltage battery disconnect circuit. • The test switch and AC “On” indicator light are mounted on the system housing utilizing a neoprene “O-ring” gasket to seal out moisture and liquids. • Capacity is sufficient for the connection of 36 or 72 output Watts (maximum). • Housing provisions allow for the attachment of single or dual, 8 or 12 Watt halogen sealed beam heads (Wattage cannot exceed unit capacity.) • Provides 90 minutes of emergency operation. • The solid-state charger maintains battery at full charge. • Upon failure or 35% dip of utility voltage (AC), the DC emergency lighting load is connected to the battery. • During emergency operation, automatic battery protection from deep discharge damage is provided by a low-voltage battery disconnect (LVD) circuit. • Upon restoration of normal power, the charger will begin a recharge cycle. It will bring the battery to full capacity within acceptable UL time standards. • A pilot light indicates the presence of AC line voltage, and a test switch is provided for checking transfer operation. • A universal transformer allows operation on 120, 220, 240 or 277 VAC 50/60HZ. lines. • Emergency power source is a sealed cell, lead acid, maintenance-free battery suited for harsh temperature environments of 32° to 104°F / 0° to 40°C. • 15 amp fuse provided as standard. • Expected life is 10 years. • Remote lamp head assemblies (one or two) are available for mounting of lamp heads away from main power supply system. • Time delay relay (15 min.) provided as standard; allows time for HID lighting to reach desired illumination levels. 1200 Standard Materials • Lighting system: —Body: Compression molded, fiberglass reinforced polyester (FRP) — Gasket: continuous silicone gasket and FRP — Mounting feet: fiberglass reinforced polyester • Remote unit: — Body: specially formulated fiberglass reinforced polyester with low surface resistivity that will not hold a static charge — Mounting feet: stainless steel — Screws (hold covers to bodies): stainless steel — Gasket (between covers to bodies): neoprene • Gaskets (under pilot light and push to test switch): neoprene • Hubs: glass filled polyester with zinc plated steel insert • Lamphead: Noryl® thermoplastic Certifications and Compliances • UL Standard: UL 924 • UL Listed: E175025 • NFPA 101 Life Safety Code Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 N2LS™ Series Emergency Luminaire Technical Data Enclosed and Gasketed Non-Metallic Emergency Lighting Systems with Remote or Direct Mounted Lamps. Class I, Division 2, Groups B, C, D Class I, Zone 2, Group IIB + H2 NEMA 3R Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For N2LS N2LS 2 8 36 Lighting Lamp Voltage: 6 - 6 Vdc 12 - 12 Vdc Series: N2LS - Emergency Lighting System Wattage Capacity: 36 - 36 W 72 - 72 W Thermal Performance — Operating Temperatures Wire Supply Ambient Temperature “T” Number 140°F/60°C Min. 32°F to max 104°F / 0°C to max 40°C T6 “T” Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (˚ºF) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (ºC) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 Wire Sizing For Remote Installations For copper wire, maximum distance (feet) between power supply and remote unit to limit voltage drop to 5%. For 6 Volt Units - Load in Watts For 12 Volt Units - Load in Watts Wire Size 8 16 24 32 8 16 24 32 16 AWG 26 13 6 3 52 26 12 6 14 AWG 42 21 10 5 84 42 20 10 12 AWG 66 33 16 8 132 66 32 16 10 AWG 106 53 26 13 212 106 52 26 8 AWG 168 84 42 21 336 168 84 42 6 AWG 270 135 67 33 540 270 134 66 Capacity of Standard N2LS Units Up to two lamps may be direct mounted. The remainder must be remote mounted. Number of lamps accommodated is dependent on whether 36 or 72 Watt unit is used. Combination Number 1 2 3 4 6 7 8 9 10 11 12 13 14 15 Number of Lamps 1 1 2 2 3 3 4 4 5 5 6 7 8 9 Watts per Lamp 8 12 8 12 8 12 8 12 8 12 12 8 8 8 Total Wattage 8 12 16 24 24 36 32 48 40 60 72 56 64 72 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1201 Lighting: Enclosed and Gasketed — Emergency Wattage Per Lamp 8-8W 12 - 12 W N - No Direct Mounted Fixture Number of Direct Mount Lamps: 0 - None 1 - One 2 - Two 6 N2LS™ Series Emergency Luminaires Enclosed and Gasketed Non-Metallic Emergency Lighting Systems with Remote or Direct Mounted Lamps. Lighting: Enclosed and Gasketed — Emergency Lighting Class I, Division 2, Groups B, C, D Class I, Zone 2, Group IIB + H2 NEMA 3R Number Watts Lamp Wattage of Lamps Per Lamp Voltage (DC) Capacity Emergency Lighting System With Two Direct Mount Lamps 2 8 6 36 2 8 12 36 2 8 6 72 2 8 12 72 2 12 6 36 2 12 12 36 2 12 6 72 2 12 12 72 Hub Size Input Voltage * Frequency Weight lbs/kg Catalog Number 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 120-277 120-277 120-277 120-277 120-277 120-277 120-277 120-277 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 19.50/8.8 19.50/8.8 19.50/8.8 19.50/8.8 19.50/8.8 19.50/8.8 19.50/8.8 19.50/8.8 N2LS28366 N2LS283612 N2LS28726 N2LS287212 N2LS212366 N2LS2123612 N2LS212726 N2LS2127212 36 36 72 72 36 36 72 72 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 120-277 120-277 120-277 120-277 120-277 120-277 120-277 120-277 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 18.50/8.4 18.50/8.4 18.50/8.4 18.50/8.4 18.50/8.4 18.50/8.4 18.50/8.4 18.50/8.4 N2LS18366 N2LS183612 N2LS18726 N2LS187212 N2LS112366 N2LS1123612 N2LS112726 N2LS1127212 36 36 72 72 3/4” 3/4” 3/4” 3/4” 120-277 120-277 120-277 120-277 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 17.50/7.9 17.50/7.9 17.50/7.9 17.50/7.9 N2LS0N366 N2LS0N3612 N2LS0N726 N2LS0N7212 Catalog Number Emergency Lighting System With One Direct Mount Lamp 1 8 6 1 8 12 1 8 6 1 8 12 1 12 6 1 12 12 1 12 6 1 12 12 Emergency Lighting System Without Direct Mount Lamps — — 6 — — 12 — — 6 — — 12 Number of Lamps Watts Lamp Per Lamp Voltage (DC) Hub Size Hub Position * Weight lbs/kg Remote Mount With One Lamp 8 6 3/4” Dead End Hub on Right 4.00/1.8 N2RR186 1 8 12 3/4” Dead End Hub on Right 4.00/1.8 N2RR1812 1 12 6 3/4” Dead End Hub on Right 4.00/1.8 N2RR1126 1 12 12 3/4” Dead End Hub on Right 4.00/1.8 N2RR11212 2 8 6 3/4” Dead End Hub on Right 5.00/2.3 N2RR286 2 8 12 3/4” Dead End Hub on Right 5.00/2.3 N2RR2812 2 12 6 3/4” Dead End Hub on Right 5.00/2.3 N2RR2126 2 12 12 3/4” Dead End Hub on Right 5.00/2.3 N2RR21212 1 Remote Mount With Two Lamps * Input voltage is 120, 220, 240 and 277 1202 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 N2LS™ Series Emergency Luminaire Dimensions Enclosed and Gasketed Non-Metallic Emergency Lighting Systems with Remote or Direct Mounted Lamps. Dimensions (In/mm) Direct Mount Fixture Single Remote Mount Fixture Dual Remote Mount Fixture Lighting 1.75"/ 44.5 mm 1.00"/ 25.4 mm .31"/ 7.9 mm Dia. (4) mtg holes 7.56"/ 192.0 mm 8.16"/ 207.7 mm .31"/ 7.9 mm Dia. (4) mtg holes 1.62"/ 41.1 mm .31” dia. (4) mtg holes 8.78"/ 223.0 mm 9.56"/ 242.8 mm 5.44”/ 138.2 mm Lighting: Enclosed and Gasketed — Emergency 11.63"/296.9 mm 14.80"/375.9 mm .31"/ 7.9 mm Dia. (4) mtg holes 1.62"/ 41.1 mm 2.81"/ 71.4 mm 3.50"/ 88.9 mm 4.06"/ 103.1 mm 12.50"/ 317.5 mm 2.81"/ 71.4 mm 3.50"/ 88.9 mm 4.06"/ 103.1 mm 18.61"/ 472.7 mm 1.00"/ 25.4 mm 12.13"/ 308.1 mm 12.44"/ 316.0 mm 13.25"/ 336.6 mm 14.13"/ 385.9 mm 5.44”/ 138.2 mm 1.44”/ 35.6 mm 9.63”/ 244.6 mm 9.63”/ 244.6 mm 6.88”/ 174.8 mm 1.38"/ 35.1 mm 4.65"/ 118.1 mm 1.38"/ 35.1 mm 4.65"/ 118.1 mm Adjustment Angle Data For Remote Unit 100º 55º 26º Top View Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Side View 1203 N2LS™ Series Emergency Luminaire Photometric Data Enclosed and Gasketed Non-Metallic Emergency Lighting Systems with Remote or Direct Mounted Lamps. Lighting Photometric Data Horizontal Isofootcandle Distribution Curves for 8 Watts Vertical Isofootcandle Distribution Curves for 8 Watts 20 20 20 20 Feet Feet Left Left Feet Feet Left Left 10 10 10 10 Lamp Axis Lighting: Enclosed and Gasketed — Emergency 00 1 0.5 0.3 0.2 20 20 00 10 10 20 20 30 30 40 40 50 50 FEET FROM LAMP ( MEASURED ON AXIS ) 60 60 70 70 80 80 0.2 0.1 00 10 10 20 20 30 40 50 30 40 50 FEET FROM LAMP ( MEASURED ON AXIS ) 60 60 70 70 80 80 FEET FROM LAMP (MEASURED ON AXIS) Vertical Isofootcandle Distribution Curves for 12 Watts Horizontal Isofootcandle Distribution Curves for 12 Watts 20 20 Feet Feet Left Left 10 10 20 20 Feet Feet Left Left 10 10 1 00 00 20 20 0.5 40 40 0.3 0.2 60 60 FEET FEETFROM FROMLAMP LAMP( MEASURED (MEASUREDON ONAXIS AXIS)) 1204 0.3 Feet Feet Right Right FEET FROM LAMP (MEASURED ON AXIS) 10 10 Feet Feet Left Left 20 20 0.5 10 10 10 10 Feet Feet Right Right 20 20 1 Lamp Axis 00 0.1 0.1 80 80 1 0 100 100 10 10 Feet Feet Left Left 20 20 00 20 20 0.5 40 40 0.3 0.2 60 60 0.1 80 80 100 100 FEET FROM LAMP ( MEASURED ON AXIS ) FEET FROM LAMP (MEASURED ON AXIS) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master Jr.™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) CSA: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H2 Applications • For use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other areas where ignitable vapors, dust, moisture and corrosive elements may be present. • Suitable for outdoor saltwater locations and for other wet locations. Features Lighting Standard Materials • Ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum • Pendant mounting hoods: diecast copperfree (4/10 of 1% max.) aluminum • Ceiling, bracket and stanchion mounting hoods: sand cast copperfree (4/10 of 1% max.) aluminum • Reflectors: fiberglass reinforced polyester Standard Finishes • Ballast bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection Options • Fuses: order fuses for field installation by catalog number, see Ballast and Fuse Kit Data. • “Hot Restrike” – add suffix -R. “Smart Starter” – add suffix -S. Emergency Options available for 50 W through 150 W HPS only. • For CEC Exd IIB + H2 rating, add suffix -Z V. • For safety chain, add suffix -SC. Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22. 2No. 137 CSA Certified: 025428 Related Products • For sealing fittings, see the Fittings Section. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1205 Lighting: Explosionproof — Area — HID • Fixtures operate safely in high ambient temperatures. • Arrangement of heat-producing components results in efficient heat dissipation for cooler fixture operation. • Patented “wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. Only wiring required is attaching two wires to connection block in mounting hood. • Connection block is easily wired: (a) loosen two screws, (b) make wire connections, and (c) re-position connection block. • Safe, easy servicing without disconnecting any wiring. “Wireless” fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a “stand-by” unit. • Acme double-lead threads speed installation and fixture removal from mounting hood – only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating problems often encountered with single-lead threads during fixture unit removal. • All threaded joints are flame-tight. • Integrally ballasted HID lighting fixtures; separate ballasts not required. • Factory sealed. External seals not required for Groups C and D. • Fixtures for use in NEC Group B locations furnished complete with UL required sealing fitting. Not required for CEC approval. • Strategic location of lamp socket, in combination with interior prism design of the glass globe, provides optimum light distribution and control. • Heat and impact-resistant globes have smooth dust-resistant exterior. • Superior corrosion resistance, with epoxy powder coat finish. • Shock-absorbing medium-base socket mounts prolong lamp life. • Porcelain socket with nickel-plated phosphor bronze screw shell. Assures long trouble-free operation in high ambient areas. • Choice of mountings: pendant, ceiling, bracket and stanchion. • Fiberglass-reinforced polyester reflectors, in standard dome, or 30° angle styles, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. • Optional guards protect globes from damage. Secured to fixture with three stainless steel screws. • Variety of light sources: high pressure sodium, pulse start metal halide and metal halide. HPS is excellent where long lamp life is required. HPS provides high lumens per watt and is less expensive to operate. PSMH and MH are desirable where colors in illuminated areas must be close to natural. • A wide range of ballasts and voltages are available for both domestic and export applications. • Ballasts operate at low temperatures – PSMH/MH: -20 °F/-29 °C; HPS: -40 °F/-40 °C. • 50 W through 150 W high pressure sodium ballasts are high reactance, high power factor type. Code•Master Jr.™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) CSA: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H2 104 °F/40˚ °C ➊ Lamp Watts Ambient Temp. “T” Numbers Ballast Type † Supply Wire Temp °F/°C 131 °F/55 ˚°C ➊ 149 °F/65 °C ➊ 104 °F/40 ˚°C ➋ Ambient Temp. “T” Numbers Supply Wire Temp °F/°C Ambient Temp. “T” Numbers Supply Wire Temp °F/°C Ambient Temp. “T” Numbers Supply Wire Temp °F/°C High Pressure Sodium — Medium Base Lamps 50 MT, TT T6 167/75 T5 167/75 T4A 167/75 T4 167/75 70 MT, TT, 480 V T5 167/75 T4A 167/75 T4A 167/75 T4 194/90 100 MT, TT, 480 V T4A 167/75 T4 194/90 — T3B 194/90 150 MT, TT, 480 V T3C 167/75 — — — T6 167/75 T5 167/75 T4A 194/90 T3C 194/90 194/90 T3C 194/90 Lighting Pulse Start Metal Halide — Medium Base Lamps 50 MT, TT 70 MT, TT, 480 V T5 167/75 T4A 167/75 T4A 100 MT, TT, 480 V T4A 194/90 T4A 194/90 — 175 MT, TT, 480 V T3B 194/90 — — — T3B 185/85 — — — Metal Halide — Medium Base Lamps V Lighting: Explosionproof — Area — HID 175 MT, TT, 480 V “T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 Fixture and Accessory Weights lbs/kgs Fixture Size Fixture Weight Reflector Weight Guard Weight 35 W thru 175 W 28-32/12.70-14.51 3/1.36 1/0.45 Pendant Ceiling Bracket Stanchion 2/.91 4/1.81 6/2.72 2/0.91 Mounting Hood Weights lbs/kgs NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code. † MT is Multi-Tap for 120/208/240/277 V, TT is Tri-Tap for 120/277/347 V. ➊ Class I, Division 1 Locations. ➋ Class II, Division 1 Locations. V CSA Certification only. 1206 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master Jr.™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) Type Mounting Lamp Watts ANSI Lamp Type ➎ HPS Catalog Number➌ ➋ PSMH Hub Size (Inches) HPS➋ ➊ PSMH M110 3/4 CJLPB5075 ➌ CJHPB5075 ➌ M98 3/4 CJLPB7075 ➍ CJHPB7075 ➍ M90 3/4 CJLPB1075 ➍ CJHPB1075 ➍ — 3/4 CJLPB1575 ➍ — M152 3/4 — CJPPB1775 ➍ M110 1-1/2 CJLSB50150 ➌ CJHSB50150 ➌ M98 1-1/2 CJLSB70150 ➍ CJHSB70150 ➍ M90 1-1/2 CJLSB10150 ➍ CJHSB10150 ➍ — 1-1/2 CJLSB15150 ➍ — M152 1-1/2 — CJPSB17150 ➍ Pendant - One Hub, Rigid or Flexible Mounting S68 70 S62 100 S54 150 S55 175 — Lighting 50 25˚ Stanchion - One Hub 50 100 150 175 S62 S54 S55 — Mounting Hoods Type Mounting Hub Size (Inches) Catalog Number Pendant One Hub 3/4 CAP-75B One Hub 1-1/2 CAS-150B 25˚ Stanchion ➊ Add suffix -SR (after adding voltage suffix) for “Smart Hot Strike” emergency option, -R for “Hot Restrike” and -S for “Smart Starter” options. ➋ To order fixture with guard, add suffix -G (before adding voltage suffix). ➌ Add voltage -MT for 120/208/240/277 V. For 480 V, contact your sales representative. ➍ Add voltage suffix -MT for 120/208/240/277 V, or -48 for 480 V. Contact your sales representative for available 50 Hz ballasts. ➎ Refer to lamp manufacturer’s data regarding lamp burning position restrictions. ➏ 35 W fixtures have 120 V ballast; add suffix -12 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1207 Lighting: Explosionproof — Area — HID 70 S68 Code•Master Jr.™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) CSA: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H2 ANSI Lamp Type ➏ Lamp Watts HPS PSMH/MH Pendant — One Hub, Rigid or Flexible Mounting Hub Size ➐ (Inches) 3/4 50 S68 M110 1 3/4 70 S62 M98 1 3/4 Lighting 100 S54 M90 1 3/4 150 S55 — Lighting: Explosionproof — Area — HID 1 3/4 175 — M152 1 Catalog Number ➋ HPS ➊ 50 S68 M110 1 3/4 70 S62 M98 1 3/4 100 S54 M90 1 3/4 150 S55 — 1 3/4 175 — M152 1 MH CJLP5075MT ➌ CJLP5075TTCN V ➌ CJLP5010MT ➌ CJLP5010TTCN V ➌ CJLP7075MT ➍ CJLP7075TTCN V➎ CJLP7010MT ➍ CJLP7010TTCN V➎ CJLP1075MT ➍ CJLP1075TTCN V➎ CJLP1010MT ➍ CJLP1010TTCN V➍ CJLP1575MT ➍ CJLP1575TTCN V➎ CJLP1510MT ➍ CJLP1510TTCN V➍ — — — — — CJHP5075MT ➌ — CJHP5075TTCN V ➌ — CJHP5010MT ➌ — CJHP5010TTCN V ➌ — CJHP7075MT ➍ — CJHP7075TTCN V➎ — CJHP7010MT ➍ — CJHP7010TTCN V➎ — CJHP1075MT ➍ — CJHP1075TTCN V➎ — CJHP1010MT ➍ — CJHP1010TTCN V➎ — — — — — — — — CJPP1775MT ➍ CJHP1775MTCN V ➍ CJPP1775TTCN V➎ CJHP1775TTCN V➎ CJPP1710MT ➍ CJHP1710MTCN V➍ CJPP1710TTCN V➎ CJHP1710TTCN V➎ CJLC5075MT ➌ CJLC5075TTCN V➌ CJLC5010MT ➌ CJLC5010TTCN V➌ CJLC7075MT ➍ CJLC7075TTCN V➎ CJLC7010MT ➍ CJLC7010TTCN V➎ CJLC1075MT ➍ CJLC1075TTCN V➎ CJLC1010MT ➍ CJLC1010TTCN V➎ CJLC1575MT ➍ CJLC1575TTCN V➎ CJLC1510MT ➍ CJLC1510TTCN V➎ — — — — — CJHC5075MT ➌ — CJHC5075TTCN V➌ — CJHC5010MT ➌ — CJHC5010TTCN V➌ — CJHC7075MT ➍ — CJHC7075TTCN V➎ — CJHC7010MT ➍ — CJHC7010TTCN V➎ — CJHC1075MT ➍ — CJHC1075TTCN V➎ — CJHC1010MT ➍ — CJHC1010TTCN V➎ — — — — — — — — CJPC1775MT ➍ CJHC1775MTCN V➍ CJPC1775TTCN V➎ CJHC1775TTCN V➎ CJPC1710MT ➍ CJHC1710MTCN V➍ CJPC1710TTCN V➎ CJHC1710TTCN V➎ Ceiling — Four Hubs, Three Close-Up Plugs 3/4 PSMH ➊ Add suffix -R for “Hot Restrike” and -S for “Smart Starter” options. ➋ To order fixture with guard, add suffix -G before adding voltage suffix. ➌ For 480 V, contact your sales representative. ➍ Change voltage suffix -MT to -48 for 480 V. ➎ Change voltage suffix -TT (120/277/347 V) to -MT for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V ➏ Refer to lamp manufacturer’s data regarding lamp burning position restrictions. ➐ Fixtures with 1” hubs listed for Class I, Group D, and Class II, Groups E, F, G only. V CSA Certification only. Shaded area indicates items suitable for Class I, Division 1, Group B. V 1208 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master Jr.™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) CSA: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H2 Lamp ANSI Lamp Type ➏ Watts HPS PSMH/MH Bracket — Four Hubs, Three Close-Up Plugs Hub Size ➐ (Inches) 3/4 50 S68 M110 1 3/4 70 S62 M98 1 3/4 100 S54 M90 3/4 150 S55 — 1 175 — M152 1 25˚ Stanchion — One Hub 50 S68 M110 70 S62 M98 100 S54 M90 150 S55 — 175 — M152 1-1/4 or 1-1/2 CJLS50150MT ➌ ➑ CJLS50150TTCN V➌ 1-1/4 or 1-1/2 CJLS70150MT ➍ ➑ CJLS70150TTCN V➍ 1-1/4 or 1-1/2 CJLS10150MT ➍ ➑ CJLS10150TTCN V➍ 1-1/4 or 1-1/2 CJLS15150MT ➍ ➑ CJLS15150TTCN V➍ — 1-1/4 or 1-1/2 ➑ — CJHB5075MT ➌ CJHB5075TTCN V➌ CJHB5010MT ➌ CJHB5010TTCN V➌ CJHB7075MT ➍ CJHB7075TTCN V➎ CJHB7010MT ➍ CJHB7010TTCN V➎ CJHB1075MT ➍ CJHB1075TTCN V➎ CJHB1010MT ➍ CJHB1010TTCN V➎ — — — — CJPB1775MT ➍ CJPB1775TTCN V➎ CJPB1710MT ➍ CJPB1710TTCN V➎ MH — — — — — — — — — — — — — — — — CJHB1775MTCN V➍ CJHB1775TTCN V➎ CJHB1710MTCN V➍ CJHB1710TTCN V➎ — CJHS50150MT ➌ — CJHS50150TTCN V➌ — CJHS70150MT ➌ — CJHS70150TTCN V➌ — CJHS10150MT ➌ — CJHS10150TTCN V➌ — — — — CJPS17150MT CJHS17150MTCN V CJPS17150TTCN V CJHS17150TTCN V ➊ Add suffix -R for “Hot Restrike” and -S for “Smart Starter” options. ➋ To order fixture with guard, add suffix -G before adding voltage suffix. ➌ For 480 V, contact your sales representative. ➍ Change voltage suffix -MT to -48 for 480 V. ➎ Change voltage suffix -TT (120/277/347 V) to -MT for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V ➏ Refer to lamp manufacturer’s data regarding lamp burning position restrictions. ➐ Fixtures with 1” hubs listed for Class I, Group D, and Class II, Groups E, F, G only. ➑ 1-1/2" tapped hub furnished with 1-1/2" to 1-1/4" reducer. V CSA Certification only. Shaded area indicates items suitable for Class I, Division 1, Group B. V Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1209 Lighting: Explosionproof — Area — HID 3/4 CJLB5075MT ➌ CJLB5075TTCN V➌ CJLB5010MT ➌ CJLB5010TTCN V➌ CJLB7075MT ➍ CJLB7075TTCN V➎ CJLB7010MT ➍ CJLB7010TTCN V➎ CJLB1075MT ➍ CJLB1075TTCN V➎ CJLB1010MT ➍ CJLB1010TTCN V➎ CJLB1575MT ➍ CJLB1575TTCN V➎ CJLB1510MT ➍ CJLB1510TTCN V➎ — — — — Catalog Number ➋ PSMH Lighting 1 HPS ➊ Code•Master Jr.™ HID Factory Sealed Luminaire Mounting Hoods and Fixture Units Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B,C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) CSA: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H2 Mounting Hoods Hub Size (Inches) Catalog Number Pendant — One Hub 3/4 CAP-75 1➋ CAP-100 Ceiling — Four Hubs, Three Close-Up Plugs 3/4 CAC-75 1➋ CAC-100 3/4 CALB-75 1➋ CALB-100 Lighting Bracket — Four Hubs, Three Close-Up Plugs 25˚ Stanchion — One Hub CAS-150 Lighting: Explosionproof — Area — HID 1-1/4 or 1-1/2 ➊ Mounting Adapter with Connection Block Permits use of existing A-51 mounting hoods (AAC Ceiling or AALB Bracket) with the new Code•Master 2 Fixture Unit. After removing existing fixture unit and adapter, screw in the new CMAD-1 Adapter. Then thread new fixture unit into the CMAD-1. CMAD-1 Fixture Units Ballast body with globe. Indicate voltage desired by adding voltage suffix to fixture unit catalog number listed below. Type Lamp Watts 50 High Pressure Sodium ➌ High Power Factor (Min. P.F. 90%) Pulse Start Metal Halide Constant Wattage (Min. P.F. 90%) Metal Halide V Constant Wattage (Min. P.F. 90%) Fixture Unit Number CJB50L- 120/208/240/277 MT Add Voltage Suffixes 120/277/347 V➍ TTCN 480 V — 70 CJB70L- MT TTCN 48 100 CJB100L- MT TTCN 48 150 CJB150L- MT TTCN 48 50 CJB50H- MT TTCN — 70 CJB70H- MT TTCN 48 100 CJB100H- MT TTCN 48 175 CJB175P- MT TTCN 48 175 CJB175H- MT TT C6 ➊ 1-1/2” Tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➋ Mounting Hoods with 1” hub listed for Class I, Group D; Class II, Groups E,F,G; and Class III only. ➌ Add suffix -R for “Hot Restrike” and -S for “Smart Starter” options. ➍ Change voltage suffix -TTCN to -MTCN for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V V CSA Certification only. Shaded area indicates items suitable for Class I, Division 1, Group B. 1210 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master Jr.™ HID Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. Description Catalog Number Polyester Reflectors Furnished with stainless steel screws Standard Dome Standard Dome KR2-ST 30° Angle KR2-AN Epoxy enameled steel — 6”-high red lettering CJEXRN 30° Angle Three-Way Exit Sign Mounts to Code•Master Jr. fixture units in place of guard. Lighting Single Sided Exit Sign Epoxy enameled steel — 6”-high red lettering AEXR-15R Mounts to Code•Master Jr. fixture units in place of guard. *Contact your sales representative regarding hazardous location suitability. CJGL-175 Aluminum Guards — 50 W through 175 W CJGU-15 Replacement Sockets — 50 W through 175 W Connection Block — 50 W through 175 W Medium base sockets CJMS-175 For all Code•Master fixtures VPT-7 HPS Hot Restrike Restrikes HPS lamp immediately when power is restored after a momentary power interruption. Optional for fixture watts of 50, 70, 100 or 150 (HPS only) Add suffix -R Smart Starter Smart Starter is for HPS fixtures only. Incorporates a 1-1/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location which reduces maintenance and repair costs. Optional for all HPS and PSMH fixtures. Add suffix -S Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1211 Lighting: Explosionproof — Area — HID Prismatic Glass Globe and Ring Assembly — 50 W through 175 W Code•Master Jr.™ HID Factory Sealed Luminaire Ballast and Fuse Kit Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine type electric fixtures, outside type (salt water) Volts Ballast Amps High Pressure Sodium Pulse Start Metal Halide HX-H.P.F. ➊ HX-H.P.F. ➊ — Super CWA ➋ Start Operating Start Operating HPS PSMH MH V 120 0.58 0.58 0.87 0.60 1 CF-5 CF-3 — 208 0.35 0.33 0.51 0.40 2 CF-3 CF-3 — 240 0.31 0.29 0.47 0.35 2 CF-3 CF-2 — 277 0.25 0.25 0.32 0.32 1 CF-2 CF-2 — 347 V — — — — — — — — Lamp Watts Lighting 50 Lighting: Explosionproof — Area — HID 70 100 150 175 CSA: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H2 Fuse Kit Catalog Number Fuse Quantity Required 480 — — — — — — — — 120 0.90 0.82 0.80 0.85 1 CF-5 CF-5 — 208 0.50 0.48 0.50 0.52 2 CF-3 CF-3 — 240 0.44 0.41 0.43 0.44 2 CF-3 CF-3 — 277 0.35 0.36 0.39 0.39 1 CF-2 CF-2 — 347 V 0.30 0.30 0.20 0.28 1 CF-2 CF-2 — 480 0.21 0.21 0.26 0.23 2 CF-2 CF-2 — 120 1.30 1.15 1.20 1.15 1 CF-8 CF-8 — 208 0.76 0.67 0.70 0.70 2 CF-5 CF-5 — 240 0.66 0.58 0.61 0.58 2 CF-5 CF-3 — 277 0.60 0.50 0.55 0.50 1 CF-3 CF-3 — 347 V 0.45 0.30 0.40 0.40 1 CF-2 CF-2 — 480 0.33 0.31 0.30 0.35 2 CF-3 CF-2 — 120 2.00 1.66 — — 1 CF-10 — — 208 1.16 0.96 — — 2 CF-5 — — 240 1.00 0.83 0.85 0.80 2 CF-5 CF-5 — 277 1.00 0.83 — — 1 CF-5 — — — 347 V 0.52 0.56 0.55 0.65 1 CF-3 — 480 0.88 0.75 — — 2 CF-5 — — 120 1.30 1.80 0.90 1.78 1 — CF-5 CF-5 208 0.75 1.04 0.50 1.08 2 — CF-3 CF-3 240 0.65 0.90 0.35 0.89 2 — CF-3 CF-3 277 0.55 0.80 0.30 0.76 1 — CF-2 CF-2 347 V 0.27 0.65 0.25 0.65 1 — CF-2 CF-2 480 0.35 0.45 0.25 0.50 2 — CF-2 CF-2 Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily in ballast body with one screw. Order one fuse for 120 V and 277 V, and 2 fuses for 208, 240 and 480 V. CF-2 = 2 Amp; CF-3 = 3 Amp; CF-5 = 5 Amp; CF-8 = 8 Amp; CF-10 = 10 Amp ➊ 35 W through 150 W HPS and 50 W through 100 W PSMH have H.P.F. High Reactance ballasts. ➋ 175 W PSMH 480 volts has CWA ballast. Multi-tap has Super CWA ballast. V CSA Certification only. 1212 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master Jr.™ HID Factory Sealed Luminaire Dimensions Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. Pendant Ceiling Bracket 0.41"/ 10.4 mm Dia. 2.46"/ 2.28"/ 62.5 mm 57.9 mm 4.25"/ 108.0 mm 4.58"/ 116.3 mm Dia. 3.75"/95.3 mm 4.92"/ 125.0 mm Sq. 4.00"/ 101.6 mm 4.50"/ 114.3 mm 17.22"/ 437.4 mm 4.00"/ 101.6 mm 7.40"/ 188.0 mm 17.87"/ 453.9 mm 1.23"/ 31.2 mm 3.46"/ 87.9 mm 3.92"/ 99.6 mm 5.92"/ 150.4 mm 1.79"/ 45.5 mm 11.5"/ 292.1 mm 13.75"/ 349.3 mm 14.12"/ 358.6 mm Lighting 7.40"/ 188.0 mm 17.47"/ 443.7 mm 18.12"/ 460.2 mm 7.40"/ 188.0 mm 8.00"/ 203.2 mm 25˚ Stanchion 16.00"/ 406.4 mm Exit Signs 9.5"/ 241.3 mm 6.10"/ 154.9 mm Reflectors 8.00"/ 203.2 mm 6.88"/ 174.8 mm 2.75"/ 69.9 mm 11.75"/298.5 mm 4.5"/ 60.5 mm Dia. 2.38"/ 60.5 mm Dia. 16.25"/ 412.8 mm Lighting: Explosionproof — Area — HID 14.12"/ 358.6 mm 15.62"/ 396.7 mm 8.50"/ 215.9 mm 14.9"/ 378.5 mm 10.17"/ 258.3 mm 8.00"/ 203.2 mm 1.5 - 11 NPT AEXR-15R 30° Angle 8.00"/ 203.2 mm 6.00"/ 152.4 mm 16.88"/ 428.8 mm 16.00"/ 406.4 mm 9.25"/ 235.0 mm 12.00"/ 304.8 mm 16.9"/ 429.3 mm CJEXRN Standard Dome 16.25"/ 412.8 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1213 Code•Master Jr.™ HID Factory Sealed Luminaire HPS Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with a 150-watt clear High Pressure Sodium lamp (16,000 lumen), without guard. For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 100 W (9,500 lumen) HPS lamp – 0.594; for Lighting Zone Lumens Total Luminaire Efficiency = 77.5% 0-10 10-20 20-30 32.97 119.16 313.87 CIE Type - General Diffuse 30-40 349.57 40-50 804.55 50-60 1193.29 % Ceiling Rcc 60-70 1327.33 % Walls 70-80 1576.23 Zonal Lumen Summary 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 1672.01 1647.69 1507.22 1221.25 607.81 27.17 1.62 0.35 0.07 0.02 Zone Lumens % Lamp % Fixture 0-30 465.99 2.9 3.8 0-40 815.56 5.1 6.6 0-60 2813.41 17.6 22.7 0-90 7388.98 46.2 59.6 90-120 4376.17 27.4 35.3 90-130 4983.97 31.1 40.2 90-150 5012.76 31.3 40.2 90-180 5013.20 31.3 40.4 180-0 12402.18 77.5 100.0 Zone Lumens Total Luminaire Efficiency = 66.9% 249.34 CIE Type - Direct 0-10 Lighting: Explosionproof — Area — HID a 70 W (6,400 lumen) HPS lamp – 0.394; for a 70 W (5800 lumen) HPS lamp – 0.363; for a 50 W (4,000 lumen) HPS lamp – 0.25; for a 35 W (2,250 lumen) HPS lamp – 0.141. For candlepower values of fixture with guard, multiply by 0.95. Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 10-20 810.25 20-30 1450.35 30-40 1495.68 0-180 1.44 40-50 1920.69 90-270 1.44 50-60 2259.61 Diagonal 1.80 60-70 1846.14 70-80 541.69 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 125.07 0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Zone Lumens 0-10 58.31 Spacing Criteria Plane Total Luminaire Efficiency = 61.8% 10-20 482.43 904.49 30-40 1163.85 0-180 2.08 40-50 1479.08 90-270 1.38 50-60 1630.56 Diagonal 1.54 60-70 1467.51 70-80 1258.91 1214 Plane Spacing Criteria Zonal Lumen Summary Lumens % Lamp % Fixture 1445.23 9.0 14.6 2609.08 16.3 26.4 5718.73 35.7 57.8 9522.24 59.5 96.3 361.80 2.3 3.7 370.13 2.3 3.7 370.23 2.3 3.7 370.23 2.3 3.7 9892.48 61.8 100.0 30 10 0 72 64 57 51 46 42 39 36 33 31 66 55 47 40 35 31 28 25 23 21 61 48 39 32 27 23 20 18 16 14 57 42 33 26 21 18 15 13 11 10 67 58 52 47 42 39 36 33 31 29 61 51 43 37 32 29 26 23 21 19 57 44 36 30 25 22 19 17 15 13 53 39 30 24 20 17 14 12 10 9 52 43 36 31 27 24 21 19 18 16 49 38 30 25 21 18 16 14 12 11 45 33 26 21 17 14 12 10 9 8 44 35 30 25 22 20 18 16 15 13 41 31 25 21 17 15 13 11 10 9 38 28 21 17 14 11 10 8 7 6 36 29 24 20 18 16 14 13 12 11 34 26 20 16 14 12 10 9 8 7 32 23 17 13 11 9 7 6 6 5 28 19 14 10 8 6 5 4 4 3 Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 80 80 80 80 78 78 78 78 74 74 74 71 71 71 68 68 68 67 1 2 3 4 5 6 7 8 9 10 73 66 59 54 49 45 42 39 36 34 69 60 52 45 40 36 32 29 27 24 66 55 46 39 34 30 26 23 21 19 64 51 42 35 29 25 22 19 17 15 71 64 58 52 48 44 40 38 35 33 68 59 51 45 39 35 32 29 26 24 65 54 46 39 33 29 26 23 21 19 63 51 41 34 29 25 22 19 17 15 65 56 49 43 38 34 31 28 25 23 63 53 44 38 33 29 25 23 20 19 61 49 41 34 29 25 21 19 17 15 62 54 47 41 37 33 30 27 25 23 61 51 43 37 32 28 25 22 20 18 59 48 40 33 28 24 21 19 17 15 60 52 45 40 35 32 29 26 24 22 59 49 42 36 31 27 24 22 20 18 57 47 39 33 28 24 21 19 17 15 56 46 38 31 27 23 20 17 15 14 REPORT NUMBER: CJL15AN Lamps: 150 W High Pressure Sodium lamp with 30° Angle Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 50 REPORT NUMBER: CJL15ST Lamps: 150 W High Pressure Sodium lamp with Standard Dome Reflector Lumens % Lamp % Fixture 2509.94 15.7 23.5 4005.62 25.0 37.4 8185.92 51.2 76.5 10698.82 66.9 100.0 0.70 0.0 0.0 0.70 0.0 0.0 0.70 0.0 0.0 0.70 0.0 0.0 10699.52 66.9 100.0 CIE Type - Direct 70 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 1 2 3 4 5 6 7 8 9 10 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 80 0 85 85 85 85 79 79 79 79 69 69 69 59 59 59 50 50 50 46 % Walls 20-30 80-90 1077.10 90-100 153.91 100-110 155.65 110-120 52.23 120-130 8.33 130-140 0.10 140-150 0.00 150-160 0.00 160-170 0.00 170-180 0.00 REPORT NUMBER: CJL15G Lamps: 150 W High Pressure Sodium lamp with Globe only * 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 73 73 73 73 71 71 71 71 67 67 67 64 64 64 61 61 61 60 1 64 59 55 52 61 58 54 51 54 51 49 51 49 47 49 47 45 43 2 3 4 5 6 7 8 9 10 56 51 46 42 38 35 33 30 28 50 43 37 32 29 26 23 21 19 44 36 30 26 22 20 17 16 14 40 31 25 21 18 15 13 12 10 54 49 44 40 37 34 31 29 27 48 41 36 32 28 25 23 21 19 43 36 30 25 22 19 17 15 14 39 31 25 21 18 15 13 12 10 46 39 34 30 27 24 22 20 18 41 34 29 25 21 19 17 15 13 38 30 24 20 17 15 13 11 10 43 37 32 28 25 23 21 19 17 39 33 28 24 21 18 16 14 13 36 29 24 20 17 15 13 11 10 41 35 30 27 24 22 20 18 17 38 31 26 23 20 17 16 14 13 35 28 23 19 17 14 12 11 10 33 27 22 18 15 13 11 10 9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master Jr.™ HID Factory Sealed Luminaire PSMH Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH V. Medium Base. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with a 175-watt clear Pulse Start Metal Halide lamp (14,000 lumen), without guard. For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 100 W (8,500 lumen) PSMH lamp – 0.607; Zone 0-10 10-20 20-30 Lumens Total Luminaire Efficiency = 77.8% 46.64 176.99 380.01 CIE Type - General Diffuse for a 70 W (5,000 lumen) PSMH lamp – 0.357. For candlepower values of fixture with guard, multiply by – 0.95. REPORT NUMBER: CJP17G Lamps: 175 W Pulse Start Metal Halide with Globe only * Coefficients of Utilization - Zonal Cavity Method 30-40 480.30 40-50 1042.35 50-60 1252.88 % Ceiling Rcc 60-70 1378.40 % Walls 70-80 1611.81 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 1741.68 1758.28 1643.71 1371.76 694.24 27.13 3.14 0.67 0.08 0.03 Zone Lumens Total Luminaire Efficiency = 66.4% 281.17 CIE Type - Direct 1567.70 30-40 1691.30 0-180 1.42 40-50 2211.91 90-270 1.42 50-60 2339.53 Diagonal 1.76 60-70 1900.87 70-80 568.93 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 145.98 1.23 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Zone Spacing Criteria Plane Total Luminaire Efficiency = 63.2% 238.28 CIE Type - Direct 10-20 739.68 20-30 1242.92 30-40 1491.36 0-180 2.10 40-50 1770.34 90-270 1.60 50-60 1739.56 Diagonal 1.62 60-70 1484.79 70-80 1197.57 689.02 254.20 105.48 35.72 41.95 8.72 6.06 4.53 2.20 0.68 Plane Spacing Criteria Zonal Lumen Summary Lumens % Lamp % Fixture 2220.87 12.7 20.1 3712.23 21.2 33.6 7222.13 41.3 65.3 10593.52 60.5 95.8 395.41 2.3 3.6 437.36 2.5 4.0 452.13 2.6 4.0 459.54 2.6 4.2 11053.05 63.2 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 67 56 48 41 36 32 28 26 23 21 62 49 40 33 28 24 21 19 17 15 58 43 34 27 22 19 16 14 12 11 67 59 53 48 43 40 36 34 31 29 62 52 44 38 33 29 26 24 21 20 58 45 37 31 26 23 20 17 15 14 54 40 31 25 21 18 15 13 11 10 53 44 37 32 28 25 22 20 18 17 49 39 31 26 22 19 17 15 13 12 46 35 27 22 18 15 13 11 9 8 45 36 31 26 23 20 18 17 15 14 42 32 26 22 18 16 14 12 11 10 39 29 22 18 15 12 10 9 8 7 37 30 25 21 19 16 15 13 12 11 35 27 21 17 15 13 11 10 9 8 33 24 18 14 12 10 8 7 6 5 29 20 15 12 9 7 6 5 4 4 Effective Floor Cavity Reflectance 0.20 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 79 79 79 79 77 77 77 77 74 74 74 71 71 71 68 68 68 66 1 2 3 4 5 6 7 8 9 10 72 65 59 54 49 45 42 39 36 34 69 60 52 46 40 36 32 29 27 25 66 55 46 39 34 30 26 23 21 19 64 51 42 35 29 25 22 19 17 16 70 64 57 52 48 44 41 38 35 33 67 58 51 45 40 35 32 29 26 24 65 54 46 39 34 29 26 23 21 19 63 51 41 35 29 25 22 19 17 16 65 56 49 43 38 34 31 28 26 24 63 52 44 38 33 29 26 23 21 19 61 49 41 34 29 25 22 19 17 15 62 54 47 41 37 33 30 27 25 23 60 51 43 37 32 28 25 22 20 18 59 48 40 34 29 25 22 19 17 15 60 52 45 40 35 32 29 26 24 22 58 49 42 36 31 28 25 22 20 18 57 47 39 33 28 24 21 19 17 15 56 46 38 32 27 23 20 18 16 14 REPORT NUMBER: CJP17AN Lamps: 175 W Pulse Start Metal Halide with 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 73 64 57 52 47 43 40 37 34 32 % Ceiling Rcc Lumens % Lamp % Fixture 2763.57 15.8 23.8 4454.87 25.5 38.3 9006.31 51.5 77.5 11622.09 66.4 100.0 1.23 0.0 0.0 1.23 0.0 0.0 1.23 0.0 0.0 1.23 0.0 0.0 11623.32 66.4 100.0 Lumens 0 Coefficients of Utilization - Zonal Cavity Method Zonal Lumen Summary 0-10 10 REPORT NUMBER: CJP17ST Lamps: 175 W Pulse Start Metal Halide with Standard Dome Reflector * % Walls Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 30 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 75 75 75 75 73 73 73 73 69 69 69 65 65 65 62 62 62 61 1 2 3 4 5 6 7 8 9 10 66 60 54 49 45 41 38 35 33 31 63 53 46 41 36 32 29 26 24 22 59 48 40 34 30 26 23 21 19 17 56 44 36 30 25 22 19 17 15 13 64 58 52 47 43 40 37 34 32 30 61 52 45 39 35 31 28 26 24 22 58 47 40 34 29 26 23 20 18 17 55 43 35 29 25 21 19 17 15 13 58 49 43 38 33 30 27 25 23 21 55 45 38 33 28 25 22 20 18 16 53 42 34 29 24 21 18 16 15 13 55 47 41 36 32 29 26 24 22 20 53 43 37 31 27 24 21 19 17 16 51 41 33 28 24 21 18 16 14 13 52 44 39 34 30 27 25 23 21 19 50 42 35 30 26 23 21 19 17 15 49 39 32 27 23 20 18 16 14 13 47 38 31 26 22 19 16 14 13 12 1215 Lighting: Explosionproof — Area — HID 914.71 20-30 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 1 2 3 4 5 6 7 8 9 10 Lumens % Lamp % Fixture 603.64 3.4 4.4 1083.94 6.2 8.0 3379.18 19.3 24.8 8111.07 46.3 59.6 4773.75 27.3 35.1 5467.99 31.2 40.2 5498.26 31.4 40.2 5499.05 31.4 40.4 13610.12 77.8 100.0 10-20 50 0 85 85 85 85 79 79 79 79 69 69 69 59 59 59 51 51 51 46 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 180-0 70 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Lighting 0-10 Effective Floor Cavity Reflectance 0.20 80 Code•Master 2™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2; IIB, IIA Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III CSA Type 4X Exd IIB, Zone 1 Applications • Ideal for use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other process areas where ignitable vapors, dust, moisture and corrosive elements may be present. • Suitable for use in wet locations. Lighting: Explosionproof — Area — HID Lighting Features • Fixtures operate safely in high ambient temperatures. For example, in Class I areas the 150 W HPS fixture operates at a maximum temperature of 248 ˚ F/120 °C in a 149 ˚F/ 65 °C ambient (212 ˚F/100 °C temperature in a 104 °F/40 °C ambient). • Arrangement of heat-producing components results in more efficient heat dissipation for cooler fixture operation. • Patented “wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. Only wiring required is attaching two wires to connection block in mounting hood. • Connection block is easily wired: (a) loosen two screws, (b) make wire connections and (c) re-position connection block. • Safe, easy servicing without disconnecting any wiring. “Wireless” fixture unit easily threads off mounting hood for convenient servicing or for immediate replacement with a “stand-by” unit. • Acme double-lead threads speed installation and fixture removal from mounting hood – only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating the troublesome problems often encountered with single lead threads during fixture unit removal. • All threaded joints are flame-tight. • Integrally ballasted HID lighting fixtures; separate ballasts not required. • Factory sealed. External seals not required. • Strategic location of lamp socket in combination with the interior prism design of the glass globe provides optimum light distribution and control. • Superior corrosion resistance, with epoxy powder coat finish. • Porcelain socket with nickel-plated phosphor bronze screw shell. Assures long trouble-free operation in high ambient areas. • Choice of mountings: pendant, ceiling, bracket and stanchion. • Fiberglass-reinforced polyester reflectors, in standard dome, deep dome or 30° angle, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. The high bay aluminum reflector is indicated in installations where mounting height from work plane ranges from 20 feet/6 meters and higher. • Optional guards protect globes from damage. Secured to fixture with three screws. • Light sources: high pressure sodium, pulse start metal halide or metal halide. HPS is excellent where long lamp life is required. HPS provides high lumens per watt and is less expensive to operate. PSMH/MH is desirable where colors of illuminated areas must be close to natural. PSMH/MH provides better color rendition, increased lumen output, longer lamp life, and faster restrike after momentary power interruption. • A wide range of ballasts and voltages are available for both domestic and export applications. • Ballasts operate at low temperatures – PSMH: -20 °F/-29 ˚C; HPS: -40 °F/-40 ˚C; MH: -31 °F/-35 ˚C. • 50 W through 150 W high pressure sodium ballasts are high reactance, high power factor type. 1216 Standard Materials • Ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum • Pendant mounting hoods: diecast copperfree (4/10 of 1% max.) aluminum • Ceiling, bracket and stanchion mounting hoods: sand cast copperfree (4/10 of 1% max.) aluminum • Reflectors: aluminum or fiberglass reinforced polyester Standard Finishes • Ballast bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection Options • Fuses for field installation can be ordered by catalog number from fuse kit table. • Quartz Auxiliary Emergency Lamp for PSMH/MH and HPS fixtures. Relay switch installed in fixture. Add suffix -E to fixture catalog number. • Smart Hot Restrike Option available for 50 W through 150 W HPS only. Add suffix -SR. • Hot Restrike Option available for 50 W through 150 W HPS only. Add suffix –R. • Smart Starter Option available for 50 W through 400 W HPS and PSMH/MH. Add suffix –S. Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaire Technical Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine Type Electric Fixtures Outside Type (Salt Water) CSA Type 4X Exd IIB, Zone 1 CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2; IIB, IIA Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III Classified Area Suitability of Code•Master 2 Series HID Fixtures — Suitability includes use of reflector Lamp Type Lamp Watts Class I, Division 1 & 2 With Globe or with Globe & Reflector UL/NEC/CEC Temp. Ident. No. Supply Wire Ambient Temp NEC CEC V (°F/˚°C) (°F/°˚C) Nameplate Marking Groups Groups 50 Metal Halide V Nameplate Marking Groups C,D B, C, D T4 E,F,G 50 167/75 131/55 T5 C,D B, C, D — — 50 185/85 149/65 T5 C,D B, C, D — — 70 140/60 104/40 T6 C,D B, C, D T4 E,F,G 70 167/75 131/55 T5 C,D B, C, D — — 70 185/85 149/65 T5 C,D B, C, D — — 100 122/60 104/40 T5 C,D B, C, D T4 E,F,G 100 167/75 131/55 T5 C,D B, C, D — — 100 185/85 149/65 T4A C,D B, C, D — — 150 122/60 104/40 T5 C,D B, C, D T3A E,F 150 167/75 131/55 T4A C,D B, C, D T3 — 250 167/75 104/40 T3C C,D B, C, D — — 250 167/75 131/55 T3C C,D B, C, D — — 400 185/85 104/40 T3C C,D B, C, D — — 175 167/75 104/40 T4 C,D B, C, D T3C E,F,G 250 167/75 104/40 T4 C,D B, C, D T3A E,F 320 167/75 104/40 T3C C,D B, C, D — — 350 167/75 104/40 T3C C,D B, C, D — — 400 167/75 104/40 T3C C,D B, C, D — — 175 167/75 104/40 T4 — B, C, D T3C E, F, G 250 167/75 104/40 T4 — B, C, D T3A E, F 400 167/75 104/40 T3C — B, C, D — — Lighting: Explosionproof — Area — HID Pulse Start Metal Halide T6 104/40 Lighting High Pressure Sodium 122/60 Class II, Division 1 & 2 With Globe or with Globe & Reflector UL/NEC/CEC Temp. Ident. No. ➊ “T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 18712 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code. ➊ Applies to Code•Master 2 only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1217 Code•Master 2™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof. Groups C and D Applications Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH. Mogul Base. For use with threaded metal conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine Type Electric Fixtures Outside Type (Salt Water) Lamp Watts ANSI Lamp Type HPS PSMH S68 — Catalog Number ➋➌ Hub Size (Inches) HPS PSMH 3/4 CLP5075 ➊ — 1 CLP5010 ➊ — 3/4 CLP7075 — Pendant — One Hub, Rigid or Flexible Mounting 50 70 100 Lighting: Explosionproof — Area — HID Lighting 150 175 S62 S54 S55 — — — — M152 250 S50 M153 320 — M154 350 — M131 400 S51 M155 50 S68 — 1 CLP7010 — 3/4 CLP1075 — 1 CLP1010 — 3/4 CLP1575 — 1 CLP1510 3/4 1 — — CPP1775 — CPP1710 3/4 CLP2575 CPP2575 1 CLP2510 CPP2510 CPP3275 3/4 — 1 — CPP3210 3/4 — CPP3575 1 — CPP3510 3/4 CLP4075 CPP4075 1 CLP4010 CPP4010 Ceiling — Four Hubs, Three Close-Up Plugs 70 S62 — 100 S54 — 150 S55 — 175 — M152 250 320 350 400 S50 — — S51 M153 M154 M131 M155 3/4 CLC5075 ➊ — 1 CLC5010 ➊ — 3/4 CLC7075 — 1 CLC7010 — 3/4 CLC1075 — 1 CLC1010 — 3/4 CLC1575 — 1 CLC1510 — 3/4 — CPC1775 1 — CPC1710 3/4 CLC2575 1 CLC2510 3/4 — CPC2575 CPC2510 CPC3275 1 — CPC3210 3/4 — CPC3575 — CPC3510 1 3/4 CLC4075 CPC4075 1 CLC4010 CPC4010 ➊ Add voltage -MT for 120/208/240/277 V. For 480 V, contact your sales representative. ➋ Add voltage suffix -MT for -120/208/240/277 V; or -480 for 480 V. To order fixture with guard, add suffix -G (before adding voltage suffix). Shaded items are suitable for Class I, Group D ONLY. 1218 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof. Groups C and D Applications Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH. Mogul Base. For use with threaded metal conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine Type Electric Fixtures Outside Type (Salt Water) ANSI Lamp Type Lamp Watts HPS PSMH 50 S68 — 70 S62 — Catalog Number ➋➌ Hub Size (Inches) HPS PSMH 3/4 CLB5075 ➊ — 1 CLB5010 ➊ — 3/4 CLB7075 — 1 CLB7010 — 3/4 CLB1075 — 1 CLB1010 — 3/4 CLB1575 — 1 CLB1510 Bracket - Four Hubs, Three Close-Up Plugs 100 150 — S55 — — M152 S50 M153 320 — M154 350 — M131 — CPB1775 ➋ 1 — CPB1710 ➋ 3/4 CLB2575 CPB2575 ➋ 1 CLB2510 CPB2510 ➋ 3/4 — CPB3275 ➋ 1 — CPB3210 ➋ 3/4 — CPB3575 ➋ 1 — CPB3510 ➋ 3/4 CLB4075 CPB4075 ➋ 1 CLB4010 CPB4010 ➋ 400 S51 M155 50 S68 — 1-1/4 or 1-1/2 ➍ CLS50150 ➊ — 70 S62 — 1-1/4 or 1-1/2 ➍ CLS70150 — 100 S54 — 1-1/4 or 1-1/2 ➍ CLS10150 — 150 S55 — 1-1/4 or 1-1/2 ➍ CLS15150 — 175 — M152 1-1/4 or 1-1/2 ➍ 250 S50 M153 1-1/4 or 1-1/2 ➍ 320 — M154 1-1/4 or 1-1/2 ➍ — CPS32150 ➋ 350 — M131 1-1/4 or 1-1/2 ➍ — CPS35150 ➋ 400 S51 M155 1-1/4 or 1-1/2 ➍ CLS40150 ➋ CPS40150 ➋ 25° Stanchion - One Hub — CLS25150 CPS17150 ➋ CPS25150 ➋ ➊ Add voltage -MT for 120/208/240/277 V. For 480 V, contact your sales representative. ➋ Add voltage suffix -MT for -120/208/240/277 V; or -480 for 480 V. To order fixture with guard, add suffix -G (before adding voltage suffix). ➍ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. Shaded items are suitable for Class I, Group D ONLY. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1219 Lighting: Explosionproof — Area — HID 250 — 3/4 Lighting 175 S54 Code•Master 2™ HID Factory Sealed Luminaires V Explosionproof, Dust-Ignitionproof. Groups B, C and D Applications Integrally Ballasted. 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Mogul Base. For use with threaded metal conduit. CSA Type 4X Exd IIB, Zone 1 CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2; IIB, IIA Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III ANSI Lamp Type Lamp Watts HPS PSMH MH S62 — — Hub Size (Inches) Catalog Number ❶❷ HPS PSMH MH 3/4 CLP7075TTCN — — 1 CLP7010TTCN — — 3/4 CLP1075TTCN — — 1 CLP1010TTCN — — 3/4 CLP1575TTCN — — 1 CLP1510TTCN — Pendant — One Hub, Rigid or Flexible Mounting 70 100 S54 — — 150 S55 — — Lighting 175 250 Lighting: Explosionproof — Area — HID 320 350 400 — S50 — — M152 M153 M154 M131 M57 M58 — — S51 M155 M59 S62 — — 3/4 — — CPP1775TTCN CHP1775TTCN — CPP1710TTCN CHP1710TTCN 3/4 CLP2575TTCN CPP2575TTCN CHP2575TTCN 1 CLP2510TTCN CPP2510TTCN CHP2510TTCN 1 3/4 — CPP3275TTCN — 1 — CPP3210TTCN — 3/4 — CPP3575TTCN — — CPP3510TTCN 1 — 3/4 CLP4075TTCN CPP4075TTCN CHP4075TTCN 1 CLP4010TTCN CPP4010TTCN CHP4010TTCN 3/4 CLC7075TTCN — — 1 CLC7010TTCN — — 3/4 CLC1075TTCN — — 1 CLC1010TTCN — — 3/4 CLC1575TTCN — — 1 CLC1510TTCN Ceiling — Four Hubs, Three Close-Up Plugs 70 100 150 175 250 320 S54 S55 — S50 — — — M152 M153 M154 — — M57 M58 — 350 — M131 — 400 S51 M155 M59 3/4 — — — CPC1775TTCN CHC1775TTCN — CPC1710TTCN CHC1710TTCN 3/4 CLC2575TTCN CPC2575TTCN CHC2575TTCN 1 CLC2510TTCN CPC2510TTCN CHC2510TTCN 1 3/4 — CPC3275TTCN — 1 — CPC3210TTCN — 3/4 — CPC3575TTCN — 1 — CPC3510TTCN — 3/4 CLC4075TTCN CPC4075TTCN CHC4075TTCN 1 CLC4010TTCN CPC4010TTCN CHC4010TTCN ➊ Change voltage suffix -TT (120/277/347 V) to -MT for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V ❷ To order fixture with guard, add suffix -G (before adding voltage suffix). V CSA Certification only. Shaded items are suitable for Class I, Group D ONLY. 1220 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaires V Explosionproof, Dust-Ignitionproof. Groups B, C and D Applications Integrally Ballasted. 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Mogul Base. For use with threaded metal conduit. CSA Type 4X Exd IIB, Zone 1 CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2; IIB, IIA Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III ANSI Lamp Type Lamp Watts HPS PSMH MH Hub Size (Inches) Catalog Number ❶❷ HPS PSMH MH Bracket - Four Hubs, Three Close-Up Plugs 70 S62 — — 100 S54 — — 150 S55 — — 175 — M152 M57 320 — — M153 M58 M154 — M131 — — — CLB7010TTCN — — 3/4 CLB1075TTCN — — 1 CLB1010TTCN — — 3/4 CLB1575TTCN — — 1 CLB1510TTCN — — 3/4 — CPB1775TTCN CHB1775TTCN 1 — CPB1710TTCN CHB1710TTCN 3/4 CLB2575TTCN CPB2575TTCN CHB2575TTCN 1 CLB2510TTCN CPB2510TTCN CHB2510TTCN 3/4 — CPB3275TTCN — 1 — CPB3210TTCN — 3/4 — CPB3575TTCN — — CPB3510TTCN 1 — 3/4 CLB4075TTCN CPB4075TTCN CHB4075TTCN 1 CLB4010TTCN CPB4010TTCN CHB4010TTCN 400 S51 M155 M59 70 S62 — — 1-1/4 or 1-1/2 ➌ CLS70150TTCN — — 100 S54 — — 1-1/4 or 1-1/2 ➌ CLS10150TTCN — — 150 S55 — — 1-1/4 or 1-1/2 ➌ CLS15150TTCN — — 175 — M152 M57 1-1/4 or 1-1/2 ➌ — 250 S50 M153 M58 1-1/4 or 1-1/2 ➌ 320 — M154 — 1-1/4 or 1-1/2 ➌ — CPS32150TTCN — 350 — M131 — 1-1/4 or 1-1/2 ➌ — CPS35150TTCN — 400 S51 M155 M59 1-1/4 or 1-1/2 ➌ 25° Stanchion - One Hub CPS17150TTCN CHS17150TTCN CLS25150TTCN CPS25150TTCN CHS25150TTCN CLS40150TTCN CPS40150TTCN CHS40150TTCN ➊ Change voltage suffix -TT (120/277/347 V) to -MT for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V ❷ To order fixture with guard, add suffix -G (before adding voltage suffix). ➌ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. V CSA Certification only. Shaded items are suitable for Class I, Group D ONLY. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1221 Lighting: Explosionproof — Area — HID 350 S50 CLB7075TTCN 1 Lighting 250 3/4 Code•Master 2™ HID Factory Sealed Luminaire Mounting Hoods and Fixture Units Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2; IIB, IIA Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III CSA Type 4X Exd IIB, Zone 1 Mounting Hoods Hub Size (Inches) Catalog Number Pendant — One Hub 3/4 CAP-75 1 CAP-100 3/4 CAC-75 1 CAC-100 3/4 CALB-75 1 CALB-100 Lighting Ceiling — Four Hubs, Three Close-Up Plugs Bracket — Four Hubs, Three Close-Up Plugs Lighting: Explosionproof — Area — HID 25˚ Stanchion — One Hub 1-1/4 or 1-1/2 ➊ CAS-150 Mounting Adapter with Connection Block Permits use of existing A-51 mounting hoods (AAC Ceiling or AALB Bracket) with the new Code•Master 2 Fixture Unit. After removing existing fixture unit and adapter, screw in the new CMAD-1 Adapter. Then thread new fixture unit into the CMAD-1. Fixture Units Ballast body with globe. Indicate voltage desired by adding voltage suffix to fixture unit catalog number listed below. Add Voltage Suffixes Lamp Fixture Unit Type Watts Number 120/208/240/277 120/277/347 V➌ 50 CMBL50 MT TTCN 70 CMBL70 MT TTCN High Pressure Sodium 100 CMBL100 MT TTCN High Power Factor 150 CMBL150 MT TTCN (Min. P.F. 90%) 250 CMBL250 MT TTCN 400 CMBL400 MT TTCN 175 CMBP175 MT TTCN 250 CMBP250 MT TTCN Pulse Start Metal Halide Constant Wattage 320 CMBP320 MT TTCN (Min. P.F. 90%) 350 CMBP350 MT TTCN 400 CMBP400 MT TTCN 175 CMBH175 MT TT Metal Halide V 250 CMBH250 MT TT Constant Wattage (Min. P.F. 90%) 400 CMBH400 MT TT CMAD-1 480 V — 48 48 48 48 48 48 48 48 48 48 C6 C6 C6 ➊ 1-1/2” Tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➋ Add suffix -R for “Hot Restrike” and -S for “Smart Starter” options. ➌ Change voltage suffix -TTCN to -MTCN for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V V CSA Certification only. Shaded items are suitable for Class I, Group D ONLY. 1222 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. Description Catalog Number Polyester Reflectors — 50 W - 400 W Standard Dome CMR-4ST Deep Dome CMR-4DD 30˚ Angle CMR-4AN Aluminum High Bay Reflectors — 50 W - 400 W CMR-4HB Lighting Prismatic Glass Globes — 50 W - 400 W CGL-250 250, 400 W HPS; 320, 350, 400 W PSMH; 400 W MH CGL-400 50, 70, 100, 150 W HPS; 175, 250 W PSMH; 175, 250 W MH CGU2 250, 400 W HPS; 320, 350, 400 W PSMH; 400 W MH CGU4 Aluminum Guards — 50 W - 400 W Replacement Sockets — 50 W - 400 W (Mogul Base) For all Code•Master 2 HID fixtures CMS-400 Connection Block – 50 W through 400 W For all Code•Master 2 HID fixtures VPT-7 Quartz Emergency Option for Pulse Start Metal Halide and High Pressure Sodium Fixtures Fixtures can be supplied with a socket to accept a 150 W or 250 W, 120 V quartz lamp (lamp not included). This D.C. bayonet base socket is in addition to the standard lamp socket, independent of the lighting fixture voltage. Add suffix -E HPS Smart Hot Restrike Smart Hot Restrike will immediately restrike an HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location, reducing maintenance and repair costs. Optional for fixture watts of 50, 70, 100 or 150 (HPS only) Add suffix -SR HPS Hot Restrike Restrikes HPS lamp immediately when power is restored after a momentary power interruption. Optional for fixture watts of 50, 70, 100 or 150 (HPS only) Add suffix -R HPS Smart Starter Smart Starter is for HPS fixtures only. Incorporates a 1-1/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location which reduces maintenance and repair costs. Optional for all HPS fixtures. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Add suffix -S 1223 Lighting: Explosionproof — Area — HID 50, 70, 100, 150 W HPS; 175, 250 W PSMH; 175, 250 W MH Code•Master 2™ HID Factory Sealed Luminaire Ballast and Fuse Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Marine Type Electric Fixtures Outside Type (Salt Water) Lamp Watts 50 Lighting 70 Lighting: Explosionproof — Area — HID 100 150 175 250 320 350 400 Volts 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 High Pressure Sodium ➊ Start Operating 0.58 0.58 0.35 0.33 0.31 0.29 0.25 0.25 — — — — 0.90 0.82 0.50 0.48 0.44 0.44 0.35 0.36 0.30 0.30 0.21 0.21 1.30 1.15 0.76 0.67 0.66 0.58 0.60 0.50 0.45 0.39 0.33 0.29 2.00 1.66 1.16 0.96 1.00 0.83 0.88 0.75 0.52 0.56 0.50 0.44 — — — — — — — — — — — — 1.75 2.70 1.00 1.50 0.85 1.30 0.75 1.15 0.60 0.93 0.40 0.65 — — — — — — — — — — — — — — — — — — — — — — — — 3.10 3.90 1.80 2.25 1.60 1.95 1.35 1.70 1.00 1.32 0.80 1.00 CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2; IIB, IIA Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III Ballast Amps Pulse Start Metal Halide Super CWA Start Operating — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 1.10 1.86 0.75 1.23 0.65 0.98 0.55 0.87 0.25 0.65 0.25 0.50 1.96 2.50 1.13 1.45 0.98 1.25 0.85 1.10 0.62 0.90 0.32 0.67 3.30 3.25 1.90 1.90 1.60 1.65 1.40 1.40 0.70 1.10 0.45 0.85 3.60 3.70 2.10 2.10 1.80 1.80 1.60 1.60 0.70 1.01 0.60 0.90 3.50 4.00 2.00 2.30 1.75 2.00 1.50 1.75 1.10 1.35 0.75 1.00 Metal Halide CWA Start Operating — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 1.30 1.80 0.75 1.10 0.65 0.90 0.55 0.80 0.50 0.65 — — 1.20 2.60 0.65 1.50 0.60 1.30 0.50 1.12 0.80 0.90 — — — — — — — — — — — — — — — — — — — — — — — — — — 3.25 4.00 1.90 2.30 1.65 2.00 1.40 1.75 1.20 1.40 — — CSA Type 4X Exd IIB, Zone 1 Fuse Kit Catalog Number Fuse Quantity Required 1 2 2 1 — — 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 HPS CF-5 CF-3 CF-3 CF-2 — — CF-5 CF-3 CF-3 CF-2 CF-2 CF-2 CF-8 CF-5 CF-5 CF-3 CF-3 CF-3 CF-10 CF-5 CF-5 CF-5 CF-5 CF-3 — — — — — — CF-8 CF-5 CF-5 CF-5 CF-5 CF-2 — — — — — — — — — — — — CF-15 CF-8 CF-5 CF-5 CF-5 CF-5 PSMH — — — — — — — — — — — — — — — — — — — — — — — — CF-5 CF-3 CF-3 CF-2 CF-2 CF-2 CF-8 CF-5 CF-5 CF-3 CF-3 CF-2 CF-8 CF-6 CF-5 CF-5 CF-5 CF-3 CF-10 CF-8 CF-5 CF-5 CF-5 CF-3 CF-10 CF-8 CF-5 CF-5 CF-5 CF-3 MH V — — — — — — — — — — — — — — — — — — — — — — — — CF-5 CF-3 CF-3 CF-2 CF-2 — CF-8 CF-5 CF-5 CF-3 CF-3 — — — — — — — — — — — — — CF-10 CF-8 CF-5 CF-5 CF-5 — Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily in ballast body with one screw. Order one fuse for 120 and 277 V, and 2 fuses for 208, 240 and 480 V. CF-2 = 2 amp; CF-3 = 3 amp; CF-5 = 5 amp; CF-6 = 6 amp; CF-8 = 8 amp; CF-10 = 10 amp ➊ 50 through 150 W HPS have H.P.F. High Reactance ballasts; 250 W and 400 W HPS have CWA ballasts. V CSA Certification only. 1224 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaire Dimensions Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. Pendant Ceiling Bracket 0.41"/ 10.4 mm Dia. 4.58"/ 116.3 mm 2.46"/ 62.5 mm 25° Stanchion 9.5"/ 241.3 mm 2.28"/ 57.9 mm 6.10"/ 154.9 mm 4.25"/ 108.0 mm 4.92"/ 125.0 mm Sq. 4.50"/ 114.3 mm 3.91"/ 99.3 mm 4.00"/ 101.6 mm 1.23"/ 31.2 mm 3.46"/ 87.9 mm 3.92"/ 99.6 mm 5.92"/ 151.1 mm 0.94"/ 23.9 mm 9.86"/ 250.4 mm 1.79"/ 45.5 mm 4.5"/ 60.5 mm Dia. 2.38"/ 60.5 mm Dia. 11.5"/ 292.1 mm 13.75"/ 349.3 mm 9.86"/ 250.4 mm Lighting 9.86"/ 250.4 mm Pendant Ceiling Bracket 25° Stanchion A B C D A B C D A B C D A B C 21.50/ 20.50/ 12.00/ 17.61/ 21.61/ 20.61/ 12.00/ 17.61/ 21.86/ 20.86/ 17.50/ 17.61/ 19.50/ 18.70/ 16.00/ 50-250 W ➊ 546.1 520.7 304.8 447.3 548.9 523.5 304.8 447.3 555.2 529.8 444.5 447.3 495.3 475.0 406.4 24.50/ 23.50/ 12.00/ 20.36/ 24.36/ 23.36/ 12.00/ 20.36/ 24.61/ 23.61/ 17.50/ 20.36/ 22.20/ 21.20/ 250-400 W ➋ 522.3 596.9 304.8 507.1 618.7 507.1 304.8 507.1 625.1 599.7 444.5 507.1 563.9 538.5 17.50/ 444.5 Fixture and Accessory Weights lbs/kgs Fixture Size 50 W through 175 W 250 W PSMH/MH 250 W HPS 320 W, 350 W and 400 W PSMH, 400 W MH Mounting Hood Weights lbs/kgs Fixture Weight 32/14.5 37/16.9 40/18.1 45/20.4 Reflector Weight 3/1.4 3/1.4 3/1.4 3/1.4 Guard Weight 1/.5 1/.5 2/.9 2/.9 Pendant 2/0.9 Ceiling 4/1.8 Bracket 6/2.7 Stanchion 2/0.9 Reflector Dimensions in In/mm Standard and Deep Dome 30° Angle High Bay 10.96"/ 278.4 mm 10.56"/ 268.2 mm 13.30"/ 337.8 mm 5.00"/ 127 mm 9.75"/ 247.7 mm 16.16"/ 410.5 mm 20.80"/ 528.3 mm ➊ 50, 70, 100 and 150 W HPS; 175 W PSMH; 175 and 250 W MH. ➋ 250 and 400 W HPS; 250, 320, 350 and 400 W PSMH; 400 W MH. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1225 Lighting: Explosionproof — Area — HID 5.50"/ 139.7 mm Dimensions in In/mm Code•Master 2™ HID Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. * Photometric data is based on a 100watt clear HPS lamp (9,500 lumens). For candlepower values of fixtures with other lamps, use the following multipliers: 50 W HPS – 0.42 (4,000 lumens); 70 W HPS – 0.61 (6,300 lumens); and 150 W HPS – 1.68 (16,000 lumens). Total Luminaire Efficiency = 76.4% CIE Type - Semi-Direct Plane Spacing Criteria 0-180 2.66 90-270 2.66 Diagonal 2.84 REPORT NUMBER: CL10G Lamps: 100 W High Pressure Sodium with Globe only Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Explosionproof — Area — HID Lighting % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 29.80 106.54 202.92 318.52 468.31 670.49 866.67 976.61 1038.41 1042.18 927.00 110-120 551.82 120-130 130-140 140-150 150-160 160-170 170-180 51.82 2.51 0.25 0.00 0.00 0.00 Total Luminaire Efficiency = 71.3% CIE Type - Direct Plane Spacing Criteria 0-180 1.54 90-270 1.54 Diagonal 1.66 0 1 2 3 4 5 6 7 8 9 10 Lumens 40.00 331.02 660.22 934.51 1131.33 1272.76 1322.68 826.95 254.44 0.00 0.00 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 1226 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 84 72 63 56 51 46 42 39 36 33 31 79 66 58 52 47 42 39 36 33 31 29 70 53 43 36 31 28 24 22 20 18 17 61 45 37 31 26 23 21 18 17 15 14 53 38 30 25 22 19 17 15 14 13 12 84 66 54 46 40 35 31 28 25 23 21 84 61 47 38 32 27 23 20 18 16 14 84 56 41 32 26 21 18 15 13 11 10 79 61 51 43 37 32 29 26 23 21 19 79 57 44 36 30 25 22 19 17 15 13 79 52 39 30 24 20 17 14 12 11 9 70 49 38 31 25 22 19 16 14 13 12 70 46 34 26 21 17 14 12 10 9 8 61 42 32 26 22 18 16 14 12 11 10 61 40 29 22 18 14 12 10 9 8 7 53 36 27 22 18 15 13 11 10 9 8 53 34 24 18 14 12 10 8 7 6 6 49 30 21 15 12 9 7 6 5 4 4 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 339.26 657.79 1796.59 4678.28 % Lamp 3.6 6.9 18.9 49.2 % Fixture 4.7 9.1 24.8 64.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 2521.83 2572.83 2575.59 2575.59 7253.87 % Lamp 26.5 27.1 27.1 27.1 76.4 % Fixture 34.8 35.5 35.5 35.5 100.0 REPORT NUMBER: CL10ST Lamps: 100 W High Pressure Sodium with Standard Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Rw 80 Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 85 76 67 60 54 49 45 41 38 35 33 83 74 65 58 52 48 43 40 37 34 32 79 67 56 48 41 36 32 29 26 24 22 76 64 54 46 40 35 31 28 25 23 21 73 61 51 44 38 33 30 27 24 22 20 85 71 60 51 44 39 34 30 27 25 23 85 68 54 44 37 31 27 23 21 18 17 85 64 49 39 31 26 22 19 16 14 12 83 70 59 50 43 38 33 30 27 24 22 83 66 53 44 36 31 27 23 20 18 16 83 63 49 38 31 26 22 18 16 14 12 79 64 51 42 35 30 26 23 20 18 16 79 61 47 38 31 25 21 18 16 14 12 76 61 50 41 34 29 25 22 20 18 16 76 59 46 37 30 25 21 18 16 14 12 73 59 48 40 33 29 25 22 19 17 15 73 57 45 36 30 25 21 18 16 14 12 71 56 43 34 28 23 19 16 14 12 11 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 1031.23 1965.74 4369.83 6773.90 % Lamp 10.9 20.7 46.0 71.3 % Fixture 15.2 29.0 64.5 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.00 0.00 0.00 0.00 6773.90 % Lamp 0.0 0.0 0.0 0.0 71.3 % Fixture 0.0 0.0 0.0 0.0 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. * Photometric data is based on a 100-watt clear High Pressure Sodium lamp (9,500 lumens). For candlepower values of fixtures with other lamps, use the following multipliers: 50 W HPS – 0.42 (4,000 lumens); 70 W HPS – 0.61 (6,300 lumens); and 150 W HPS – 1.68 Total Luminaire Efficiency = 61.9% CIE Type - Direct Plane Spacing Criteria 0-180 1.96 90-270 1.62 Diagonal 1.50 (16,000 lumens). REPORT NUMBER: CL10AN Lamps: 100 W High Pressure Sodium with 30° Angle Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 Total Luminaire Efficiency = 37.8% CIE Type - Direct Plane Spacing Criteria 0-180 1.36 90-270 1.36 Diagonal 1.54 0 1 2 3 4 5 6 7 8 9 10 Lumens 26.07 224.04 437.71 551.18 656.83 743.35 592.81 265.53 94.52 0.00 0.00 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 30 10 0 50 30 10 50 30 10 50 30 10 0 74 64 57 51 47 42 39 36 33 31 29 72 62 55 50 45 41 38 35 32 30 28 69 56 47 40 35 31 28 25 22 20 19 66 53 45 38 34 30 26 24 22 20 18 63 51 43 37 32 28 25 23 21 19 18 74 60 51 43 38 33 29 26 24 22 20 74 56 45 37 31 27 23 20 18 16 14 74 53 41 32 26 22 19 16 14 12 11 72 59 49 42 37 32 29 26 23 21 19 72 55 44 37 31 26 23 20 18 16 14 72 52 40 32 26 22 18 16 14 12 11 69 53 43 35 30 26 22 20 17 15 14 69 50 39 31 26 21 18 16 14 12 11 66 51 41 34 29 25 22 19 17 15 14 66 49 38 31 25 21 18 16 14 12 11 63 49 40 33 28 24 21 19 17 15 13 63 47 37 30 25 21 18 15 13 12 11 62 46 36 28 23 19 16 14 12 11 9 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 911.80 1737.18 3634.06 5883.18 % Lamp 9.6 18.3 38.3 61.9 % Fixture 15.5 29.5 61.8 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.0 0.0 0.0 0.0 5883.18 % Lamp 0.0 0.0 0.0 0.0 61.9 % Fixture 0.0 0.0 0.0 0.0 100.0 REPORT NUMBER: CL10DD Lamps: 100 W High Pressure Sodium with Deep Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 50 70 50 30 10 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 45 41 37 33 30 27 25 23 21 20 18 44 40 36 32 29 26 24 22 21 19 18 42 36 31 27 23 21 18 16 15 13 12 40 35 30 26 22 20 18 16 14 13 12 39 33 29 25 22 19 17 15 14 13 12 45 39 33 29 25 22 19 17 16 14 13 45 37 30 25 21 18 16 14 12 11 10 45 35 28 22 18 15 13 11 10 9 8 44 38 32 28 24 21 19 17 15 14 13 44 36 30 25 21 18 16 14 12 11 10 44 35 28 22 18 15 13 11 10 9 8 42 35 29 24 20 17 15 13 12 11 10 42 34 27 22 18 15 13 11 10 9 8 40 34 28 23 20 17 15 13 12 10 9 40 33 26 21 18 15 13 11 10 8 8 39 32 27 23 19 17 15 13 11 10 9 39 32 26 21 18 15 13 11 10 8 7 38 31 25 20 17 14 12 10 9 8 7 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens 687.82 1239.00 2639.18 3592.04 % Lamp 7.2 13.0 27.8 37.8 % Fixture 19.1 34.5 73.5 100.0 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 0.0 0.0 0.0 0.0 3592.04 % Lamp 0.0 0.0 0.0 0.0 37.8 % Fixture 0.0 0.0 0.0 0.0 100.0 1227 Lighting: Explosionproof — Area — HID Lumens 34.59 289.50 587.71 825.38 944.04 952.84 900.69 740.88 607.55 0.00 0.00 70 70 50 30 10 Lighting Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Rw 80 Code•Master 2™ HID Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. * Photometric data is based on a 400-watt clear Pulse Start Metal Halide lamp (34,000 lumens). For candlepower values of fixtures with other lamps, use the following multipliers: 400 W HPS – 1.13 (50,000 lumens); and 250 W HPS – 0.68 (30,000 lumens). Total Luminaire Efficiency = 81.9% CIE Type - General Diffuse REPORT NUMBER: CP40G Lamps: 400 W Pulse Start Metal Halide with Globe only Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Explosionproof — Area — HID Lighting % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 Lumens 161.29 470.38 918.96 1511.24 2242.10 3052.29 3653.41 4255.87 4603.15 4476.83 4007.91 3380.83 120-130 130-140 140-150 150-160 160-170 170-180 2599.55 672.85 18.11 2.59 1.21 0.65 Total Luminaire Efficiency = 70.4% CIE Type - Direct Plane Spacing Criteria 0-180 1.46 90-270 1.46 Diagonal 1.70 Lumens 595.04 1709.44 2776.90 3730.18 4573.20 5290.95 5418.07 5086.12 1757.09 33.71 0.00 0.00 120-130 0.00 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 1228 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 89 76 67 60 55 50 45 42 39 36 33 83 70 62 55 50 45 41 38 35 33 31 72 55 45 39 33 29 26 23 21 19 18 61 46 37 32 27 24 21 19 17 16 15 52 38 30 25 22 19 17 15 14 13 12 89 70 59 50 43 38 34 30 27 25 22 89 65 51 42 35 30 26 22 20 18 16 89 60 45 36 29 24 20 17 15 13 11 83 65 54 46 40 35 31 28 25 23 21 83 60 48 39 32 28 24 21 18 16 15 83 56 42 33 27 22 18 16 14 12 10 72 51 40 33 27 23 20 18 15 14 12 72 48 36 28 23 19 16 13 12 10 9 61 43 33 27 22 19 16 14 13 11 10 61 40 30 23 19 15 13 11 9 8 7 52 35 27 22 18 15 13 11 10 9 8 52 33 24 19 15 12 10 9 7 6 6 47 29 20 15 12 9 8 6 5 5 4 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens % Lamp 1550.63 3.5 3061.87 7.0 8356.25 19.0 20868.68 47.4 % Fixture 4.3 8.5 23.2 57.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 11865.57 14465.12 15156.08 15160.53 36029.22 % Lamp 27.0 32.9 34.4 34.5 81.9 % Fixture 32.9 40.1 40.1 42.1 100.0 REPORT NUMBER: CP40ST Lamps: 400 W Pulse Start Metal Halide with Standard Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 80 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 84 74 65 58 53 48 44 41 38 35 33 82 72 63 57 51 46 43 39 37 34 32 78 64 54 46 40 35 31 28 26 23 22 75 62 51 44 38 34 30 27 25 23 21 72 59 49 42 36 32 29 26 24 22 20 84 69 58 49 43 38 33 30 27 25 23 84 65 52 42 35 30 26 23 21 18 17 84 62 47 37 30 25 21 18 16 14 13 82 68 57 48 42 37 33 29 27 24 22 82 64 51 42 35 30 26 23 20 18 17 82 60 46 36 30 25 21 18 16 14 13 78 61 49 40 34 29 25 22 20 18 16 78 58 45 36 29 24 21 18 16 14 13 75 59 47 39 33 28 25 22 19 18 16 75 57 44 35 29 24 21 18 16 14 12 72 57 46 38 32 27 24 21 19 17 16 72 55 43 34 28 24 20 18 15 14 12 70 53 41 32 26 22 19 16 14 12 11 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens % Lamp 5081.38 11.5 8811.56 20.0 18675.71 42.4 30936.99 70.3 % Fixture 16.4 28.5 60.3 99.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 33.71 33.71 33.71 33.71 30970.7 % Lamp 0.1 0.1 0.1 0.1 70.4 % Fixture 0.1 0.1 0.1 0.1 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. * Photometric data is based on a 400-watt clear Pulse Start Metal Halide lamp (34,000 lumens). For candlepower values of fixtures with other lamps, use the following multipliers: 400 W HPS – 1.13 (50,000 lumens); and 250 W HPS – 0.68 (30,000 lumens). Total Luminaire Efficiency = 62.5% CIE Type - Direct Plane Spacing Criteria 0-180 2.02 90-270 1.48 Diagonal 1.64 REPORT NUMBER: CP40AN Lamps: 400 W Pulse Start Metal Halide with 30° Angle Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls 120-130 65.68 130-140 140-150 150-160 160-170 170-180 20.81 11.94 7.93 4.46 1.47 Total Luminaire Efficiency = 69.1% CIE Type - Direct Plane Spacing Criteria 0-180 1.48 90-270 1.48 Diagonal 1.62 Lumens 676.92 1962.51 3199.12 4281.42 4889.12 5408.09 5456.18 3822.90 693.25 20.14 0.00 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 30 10 0 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 73 64 57 51 47 43 39 36 34 31 29 71 62 55 49 45 41 38 35 32 30 28 67 54 46 39 35 31 27 25 22 21 19 63 51 43 37 32 29 26 23 21 20 18 59 48 40 35 30 27 24 22 20 19 17 73 60 51 44 38 34 30 27 24 22 20 73 56 45 38 32 27 24 21 19 17 15 73 53 41 33 27 23 19 17 15 13 12 71 58 49 42 37 33 29 26 24 22 20 71 55 44 37 31 27 23 21 18 16 15 71 52 40 32 26 22 19 17 15 13 12 67 52 42 35 29 25 22 20 18 16 14 67 49 38 31 25 22 18 16 14 13 11 63 49 40 33 28 24 21 19 17 15 14 63 47 37 30 25 21 18 16 14 12 11 59 46 38 31 27 23 20 18 16 15 13 59 44 35 26 24 20 17 15 13 12 11 58 42 33 27 22 19 16 14 12 11 10 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens % Lamp 4398.28 10.0 7751.71 17.6 15573.61 35.4 25338.08 57.6 % Fixture 16.0 28.2 56.7 92.2 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 2039.87 2105.55 2138.30 2152.16 27490.24 % Lamp 4.6 4.8 4.9 4.9 62.5 % Fixture 7.4 7.7 7.7 7.8 100.0 REPORT NUMBER: CP40DD Lamps: 400 W Pulse Start Metal Halide with Deep Dome Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 50 70 50 30 10 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 82 74 66 59 54 49 45 41 38 36 34 80 72 64 57 52 47 44 40 37 35 33 77 65 55 48 42 37 33 30 27 25 23 73 63 53 46 40 35 32 29 26 24 22 70 60 51 44 38 34 30 28 25 23 21 82 70 59 51 44 39 35 31 28 26 24 82 66 54 44 38 32 28 24 22 20 18 82 63 49 39 32 27 23 20 18 16 14 80 68 58 50 43 38 34 31 28 25 23 80 65 53 44 37 32 28 24 22 20 18 80 62 49 39 32 27 23 20 18 16 14 77 63 51 42 36 31 27 24 21 19 18 77 60 47 38 32 27 23 20 17 16 14 73 60 49 41 35 30 26 23 21 19 17 73 58 46 38 31 26 23 20 17 15 14 70 58 48 40 34 29 26 23 21 19 17 70 57 45 37 31 26 22 19 17 15 14 69 55 44 35 29 24 21 18 16 14 12 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 Lumens % Lamp 5838.56 13.3 10119.98 23.0 20417.19 46.4 30389.51 69.1 % Fixture 19.2 33.3 67.1 99.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 20.14 20.14 20.14 20.14 30409.65 % Lamp 0.0 0.0 0.0 0.0 69.1 % Fixture 0.1 0.1 0.1 0.1 100.0 1229 Lighting: Explosionproof — Area — HID Lumens 503.08 1461.14 2434.06 3353.43 3867.50 3954.40 3752.38 3368.71 2643.39 1531.50 421.63 86.74 70 Rw Lighting Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 80 Code•Master 2™ HID Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. For use with threaded metal conduit. * Photometric data is based on a 400-watt clear Pulse Start Metal Halide lamp (34,000 lumens). For candlepower values of fixtures with other lamps, use the following multipliers: 400 W HPS – 1.13 (50,000 lumens); and 250 W HPS – 0.68 (30,000 lumens). Total Luminaire Efficiency = 63.4% CIE Type - Direct Plane Spacing Criteria 0-180 1.40 90-270 1.40 Diagonal 1.52 REPORT NUMBER: CP40HB Lamps: 400 W Pulse Start Metal Halide with High Bay Reflector Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone Lighting: Explosionproof — Area — HID Lighting 0-10 Rw 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 Lumens 0 76 76 76 76 74 74 74 74 70 70 70 67 67 67 65 65 65 63 1044.42 1 71 69 67 65 69 67 65 64 65 63 62 62 61 60 60 59 58 57 10-20 3491.70 2 66 62 59 56 64 61 58 55 59 56 54 57 55 53 55 53 52 50 20-30 5976.88 3 61 56 52 48 60 55 51 48 53 50 47 51 49 46 50 48 46 44 30-40 6632.58 4 57 50 46 42 55 50 45 42 48 44 42 47 44 41 45 43 40 39 40-50 7143.25 5 53 46 41 37 51 45 40 37 44 40 37 43 39 36 42 38 36 35 50-60 2844.46 6 49 42 37 33 48 41 36 33 40 36 33 39 35 32 38 35 32 31 60-70 634.65 7 46 38 33 30 44 37 33 29 37 32 29 36 32 29 35 31 29 28 70-80 115.54 8 42 35 30 27 42 34 30 26 34 29 26 33 29 26 32 29 26 25 80-90 20.82 9 40 32 27 24 39 32 27 24 31 27 24 30 26 24 30 26 24 23 10 37 29 25 22 36 29 25 22 29 24 22 28 24 22 27 24 21 20 90-100 1.23 100-110 0.00 110-120 0.00 Zonal Lumen Summary 120-130 0.00 Zone Lumens % Lamp 130-140 0.00 0-30 10513.00 23.9 37.7 90-120 1.23 0.0 0.0 140-150 0.00 0-40 17145.58 39.0 61.4 90-130 1.23 0.0 0.0 150-160 0.00 0-60 27133.29 61.7 97.2 90-150 1.23 0.0 0.0 160-170 0.00 0-90 27904.30 63.4 100.0 90-180 1.23 0.0 0.0 170-180 0.00 27905.53 63.4 100.0 1230 % Fixture Zone 0-180 Lumens % Lamp % Fixture Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Induction Lighting System Explosionproof, Factory Sealed Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X Applications • Ideal for where access to relamp is difficult, reliability is essential and environment is costly to maintain. Also for cold-environment applications. • Code Master Induction fixtures are ideal for: use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other process areas where ignitable vapors, moisture and corrosive elements may be present. • Suitable for use in wet locations. Features • • • • • • • • • • • • • • • • Standard Materials • Fixture bodies and guards: copperfree (4/10 of 1% max.) aluminum. • Pendant mounting hoods: diecast copperfree (4/10 of 1% max.) aluminum. • Ceiling, bracket and stanchion mounting hoods: sand-cast copperfree (4/10 of 1% max.) aluminum. • Reflectors: aluminum or fiberglass reinforced polyester. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Standard Finishes • Fixture bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection. Options • Fuses can be ordered for field installation by catalog number. Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10444 1231 Lighting: Explosionproof — Area — Induction • • • Illustrated Features Lighting • Instant start and restrike. High lumen output and efficacy (up to 73 lumens per watt). Fixtures operate safely in a 104 °F/40 °C ambient. Good lumen maintenance provides less than 30% depreciation after 60,000 hours of operation. Virtually maintenance free. Ultra-long 100,000 hours of life keeps maintenance costs to a minimum. Starts in temperatures as low as -40 °F/-40 °C. Arrangement of heat-producing components results in more efficient heat dissipation for cooler fixture operation. Patented “wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. Only wiring required is attaching two wires to connection block in mounting hood. Connection block is easily wired: (a) loosen two screws; (b) make wire connections; and (c) reposition connection block and tighten screws. Low total harmonic distortion (<10%). No cycling at end of life. Acme double lead threads speed installation and fixture removal from mounting hood – only half as many turns are required as for single lead threads. The threads do not stick or gall, eliminating the troublesome problems often encountered with single lead threads during fixture unit removal. All threaded joints are flame-tight. Factory sealed. External seals not required. Strategic location of lamp socket in combination with the interior prism design of the glass globe, provides optimum light distribution and control. Superior corrosion resistance, with epoxy powder coat finish. Choice of mountings: pendant, ceiling, bracket or stanchion. Fiberglass-reinforced polyester reflectors, in standard dome, deep dome or 30° angle, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. The high bay aluminum reflector is designed for installations where mounting height work planes range from 20 to 30 feet/6 to 9 meters Optional guards protect globes from damage. Secured to fixture with three screws. Code•Master 2™ Induction Lighting System Classified Area and Ambient Suitability Explosionproof, Factory Sealed Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X Classified Area Suitability of Code•Master 2 Series Induction Fixtures (suitability includes use of reflector) Induction Class II, Division 1 & 2 With Globe or with Globe & Reflector NEC/cUL/CEC Temp. Ident. No. Watts Supply Wire Temp °F/°C Ambient Temp °F/°C Nameplate Marking Groups Nameplate Marking Groups 55 140/60 104/40 T6 C,D T6 E,F,G 85 167/75 104/40 T6 C,D T6 E,F,G Lamps Type Class I, Division 1 & 2 With Globe or with Globe & Reflector NEC/cUL/CEC Temp. Ident. No. NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°˚C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86-100 85 Lighting: Explosionproof — Area — Induction Lighting “T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. 1232 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Induction Lighting System Explosionproof, Factory Sealed 55 W and 85 W Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X Type Mounting Lamp Watts Hub Size (Inches) Catalog Number ➊ 55 3/4 CQP5575 ➋ 55 1 CQP5510 ➋ 85 3/4 CQP8575 ➋ 85 1 CQP8510 ➋ 55 3/4 CQC5575 ➋ 55 1 CQC5510 ➋ 85 3/4 CQC8575 ➋ 85 1 CQC8510 ➋ 55 3/4 CQB5575 ➋ 55 1 CQB5510 ➋ 85 3/4 CQB8575 ➋ 85 1 CQB8510 ➋ 55 1-1/4 or 1-1/2 ➌ CQS55150 ➋ 85 1-1/4 or 1-1/2 ➌ CQS85150 ➋ Pendant One Hub, Rigid or Flexible Mounting Ceiling Four Hubs, Three Close-up Plugs Lighting Bracket Four Hubs, Three Close-up Plugs Lighting: Explosionproof — Area — Induction 25° Stanchion ➍ One Hub ➊ To order fixture with guard, add suffix G (before adding voltage suffix). ➋ Add voltage suffix 120 for 90-140 Vac; or 277 for 180-305 Vac. ➌ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➍ Refer to lamp manufacturer’s data regarding lamp burning position restrictions. Shaded items are suitable for Class I, Group C in addition to other applicable area suitabilities. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1233 Code•Master 2™ Induction Lighting System Accessories Explosionproof, Factory Sealed Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X Mounting Hoods Hub Size (Inches) Type Mounting Catalog Number Pendant 3/4 CAP-75 1 CAP-100 Four Hubs, Three Close-Up Plugs 3/4 CAC-75 1 CAC-100 Four Hubs, Three Close-Up Plugs 3/4 CALB-75 1 CALB-100 One Hub Ceiling Bracket 25˚ Stanchion Lighting: Explosionproof — Area — Induction Lighting One Hub CAS-150 1-1/4 or 1-1/2 ➊ Mounting Adapter with Connection Block Permits use of existing A-51 mounting hoods (AAC Ceiling or AALB Bracket) with the new Code•Master 2 Fixture Unit. After removing existing Fixture Unit and adapter, screw in the new CMAD-1 Adapter. Then thread new Fixture Unit into the CMAD-1. CMAD-1 Fixture Units — 55 W to 85 W Fixture body with globe. Indicate voltage desired by adding voltage suffix to Fixture Unit catalog number listed below. Type Frequency 120 V 277 V Induction 50/60 Hz 55 CMBQ55 -12 -27 50/60 Hz 85 CMBQ85 -12 -27 Fixture and Accessory Weights lbs/kgs Fixture Unit Number Add Voltage Suffixes Lamp Watts Mounting Hood Weights lbs/kgs Fixture Size Fixture Weight Reflector Weight Guard Weight 55 W 28/12.7 3/1.4 1/.5 Pendant Ceiling Bracket Stanchion 2/.9 4/1.8 6/2.7 2/.9 85 W 28/12.7 3/1.4 1/.5 ➊ 1-1/2” Tapped hub furnished with 1-1/2” to 1-1/4” reducer. Shaded items are suitable for Class I, Group C in addition to other applicable area suitabilities. 1234 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Induction Lighting System Accessories Explosionproof, Factory Sealed Description Catalog Number Polyester Reflectors — 55 W and 85 W Standard Dome CMR-4ST Deep Dome CMR-4DD 30˚ Angle CMR-4AN 55 W and 85 W CMR-4HB 55 W and 85 W CGL-400 Aluminum High Bay Reflectors Prismatic Glass Globes Lighting Aluminum Guards CGU4 Lighting: Explosionproof — Area — Induction Connection Block VPT-7 55 W and 85 W For all Code•Master 2 Induction fixtures Lamp Watts Volts Fuse Quantity Required Fuse Catalog Number 55 120-277 See note below ➊ CF2 85 120-277 See note below ➊ CF2 Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily in ballast body with one screw. ➊ Order one fuse for 120 and 277 V, and 2 fuses for 208 and 240 V. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1235 Code•Master 2™ Induction Lighting System Operating Data Explosionproof, Factory Sealed Electromagnetic Compatibility A.) Complies with European norms EN55015, EN6100-3-2 and EN61547 B.) RFI a.) Meets standard EN55022 and is valid for frequencies up to 1000 MHz. Lighting: Explosionproof — Area — Induction Lighting Electrical Characteristics System power ➊ nom. System power ➊ min. System power ➊ max. AC supply voltage nom. AC supply voltage min. AC supply voltage max. DC supply voltage nom. DC supply voltage min. DC supply voltage max. Supply frequency nom. Supply frequency min. Supply frequency max. Supply current nom. Inrush current max. Duration inrush current max. Power factor nom. HF output frequency nom. HF output frequency min. HF output frequency max. HF output voltage max. Leakage current Overvoltage 55 W 100-120 V 55 53.1 56.9 120 90 140 120 90 180 60 47 63 460 16 170 >0.92 2.65 2.30 3.00 1.5 <0.5 200 Vac W W W V V V V V V Hz Hz Hz mA A usec MHz MHz MHz kV mA 55 W 200-277 V 55 53.1 56.9 230 180 305 230 180 350 50 47 63 260 12 170 >0.92 2.65 2.30 3.00 1.5 <0.5 400 Vac 85 W 100-120 V 85 82.0 88.0 120 90 140 120 90 180 60 47 63 730 16 170 >0.92 2.65 2.30 3.00 1.5 <0.5 200 Vac 85 W 200-277 V 85 82.0 88.0 230 180 305 230 180 350 50 47 63 400 12 170 >0.92 2.65 2.30 3.00 1.5 <0.5 400 Vac Lamp Characteristics Values at 100 hours Luminous flux nom. Luminous flux min. Luminous flux max. System efficacy nom. lm lm lm lm/W QL 55 W QL 85 W 3500 3200 3800 65 6000 5500 6500 70 Lamp Operation A.) Ignition and Lifetime Performance a.) Ignition time <0.5 second Hot Restrike time <0.5 second b.) Induction lighting offers a direct, flicker-free ignition after switch-on, in both cold and hot conditions B.) Lumen Maintenance a.)The lumens of an induction lamp are expected to have depreciated after 60,000 hours to no less than 75% of the initial lumens ➊ At design voltage. 1236 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Induction Lighting System Photometric Data Explosionproof, Factory Sealed Data based on fixtures with 85-watt lamp. For candlepower values of fixtures with other lamps, use the following multiplier: for 55 W lamp – 0.59 (3,500 lumens). Total Luminaire Efficiency = 71.6% Report Number: CMBQL85 85-Watt Lamp with Globe only CIE Type - Semi-Direct Degree Candela Lumens Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance (Rfc) = 0.20 0 301 5 304 29 % Ceiling Rc 15 318 91 % Walls 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 25 359 166 0 79 79 79 79 74 74 74 74 65 65 65 57 57 57 49 49 49 46 35 398 250 1 68 63 58 54 63 59 55 51 51 48 45 44 41 39 37 35 33 30 45 424 328 2 60 53 46 41 56 49 43 39 42 38 34 36 32 29 30 27 25 22 55 447 400 3 54 45 38 32 50 42 36 30 36 31 27 30 26 23 25 22 19 16 65 465 462 4 49 39 32 26 45 36 30 25 31 26 22 26 22 19 22 18 16 13 75 475 502 5 45 34 27 22 41 32 25 21 27 22 18 23 19 15 19 16 13 11 85 474 517 90 472 Zonal Lumen Summary Zone Lumens % Lamp % Fixture 468 510 440 464 0- 30 115 125 135 145 155 165 175 180 348 205 58 2 1 1 0 0 344 185 49 2 0 0 0 0- 40 0- 60 0- 90 90-120 90-130 90-150 90-180 0-180 287 4.8 6.7 537 1265 2745 1318 1503 1553 1553 4298 8.9 21.1 45.7 22.0 25.0 25.9 25.9 71.6 12.5 29.4 63.9 30.6 35.0 36.1 36.1 100.0 Total Luminaire Efficiency = 62.9% 8 6 9 13 10 7 6 8 12 6 5 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 10 30 20 15 11 28 19 14 10 17 12 9 14 10 9 Lumens Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance (Rfc) = 0.20 0 960 5 962 92 15 955 271 % Ceiling Rc % Walls 80 70 50 30 10 0 25 942 436 0 75 75 75 75 73 73 73 73 69 69 69 66 66 66 63 63 63 62 35 903 566 1 67 64 61 58 66 63 60 57 60 58 55 57 55 54 55 53 52 50 45 834 647 2 61 55 50 46 59 54 49 46 51 48 44 49 46 43 47 44 42 41 55 764 683 3 55 48 42 38 53 46 41 37 44 40 36 43 39 36 41 38 35 33 65 611 600 4 50 42 36 31 48 41 35 31 39 34 30 37 33 30 36 32 29 28 75 325 346 5 45 37 31 26 44 36 30 26 35 30 26 33 29 25 32 28 25 24 89 85 76 90 14 6 42 33 27 23 40 32 27 22 31 26 22 30 25 22 29 25 22 20 Zonal Lumen Summary Zone 95 10 11 105 8 10 0-30 115 125 135 145 155 165 175 180 11 11 6 1 1 0 1 0 10 9 5 1 0 0 0 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180 7 39 30 24 20 37 29 23 20 28 23 19 27 22 19 26 22 19 18 Lumens % Lamp % Fixture 8 36 27 21 17 35 26 21 17 25 21 17 25 20 17 24 20 17 15 798 13.3 21.1 9 33 25 19 15 32 24 19 15 23 19 15 23 18 15 22 18 15 14 1364 2694 3729 31 40 46 46 3775 22.7 44.9 62.2 0.5 0.7 0.8 0.8 62.9 36.1 71.4 98.8 0.8 1.1 1.2 1.2 100.0 10 31 23 17 14 30 22 17 14 21 17 14 21 17 14 20 16 13 12 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1237 Lighting: Explosionproof — Area — Induction Candela 8 35 25 18 14 32 23 17 13 20 15 11 17 13 10 14 11 9 32 22 16 12 30 21 15 11 18 13 10 15 11 Report Number: CMBQL85ST 85-Watt Lamp with Standard Dome Reflector CIE Type - Direct Degree 9 7 9 Lighting 95 105 6 41 30 23 19 38 28 22 17 24 19 15 21 16 13 17 14 11 7 38 27 21 16 35 25 19 15 22 17 13 19 14 11 16 12 Code•Master 2™ Induction Lighting System Photometric Data Explosionproof, Factory Sealed Data based on fixtures with 85-watt lamp. For candlepower values of fixtures with other lamps, use the following multiplier: for 55 W lamp – 0.59 (3,500 lumens). Total Luminaire Efficiency = 56.7% Report Number: CMBQL85AN 85-Watt Lamp with 30° Angle Dome Polyester Reflector CIE Type - Direct Candela Distribution 0.0 Coefficients of Utilization - Zonal Cavity Method 45.0 90.0 135.0 180.0 Flux Effective Floor Cavity Reflectance (Rfc) = 0.20 % Ceiling Rc 0 842 842 842 842 842 5 881 869 843 814 802 Lighting 70 50 30 10 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 15 956 920 835 764 738 239 0 67 67 67 67 65 65 65 65 61 61 61 58 58 58 55 55 55 54 25 1015 956 833 728 676 388 1 60 56 53 51 58 55 52 49 52 49 47 49 47 45 46 45 43 42 35 1044 969 822 612 473 494 2 54 48 44 40 52 47 43 39 44 41 38 42 39 37 40 37 35 34 45 1046 960 772 358 198 522 3 48 42 37 33 47 41 36 32 38 34 31 36 33 30 35 32 29 28 55 1030 945 595 137 52 498 4 44 37 31 27 43 36 31 27 34 30 26 32 28 25 31 27 25 23 65 1004 898 349 30 3 441 5 40 33 27 23 39 32 27 23 30 26 22 29 25 22 27 24 21 20 75 932 711 142 2 0 349 6 37 29 24 20 36 29 23 20 27 23 19 26 22 19 25 21 19 17 85 705 425 43 1 1 223 7 34 26 21 17 33 26 21 17 25 20 17 24 20 17 23 19 16 15 90 551 289 11 2 2 8 32 24 19 15 31 23 19 15 22 18 15 22 18 15 21 17 15 13 95 393 177 4 4 4 108 9 30 22 17 14 29 21 17 14 21 16 13 20 16 13 19 16 13 12 105 147 Lighting: Explosionproof — Area — Induction % Walls 81 80 115 46 61 1 9 6 40 4 3 13 9 13 10 28 20 16 12 27 20 15 12 19 15 12 18 15 12 18 14 12 11 Zonal Lumen Summary 125 2 1 4 12 9 5 Zone Lumens 135 0 1 2 4 3 2 0- 30 707 % Lamp 11.8 % Fixture 20.8 145 0 1 1 1 1 1 0- 40 1201 20.0 35.3 155 0 1 2 2 1 1 0- 60 2221 37.0 65.3 165 0 1 1 1 0 0 0- 90 3233 53.9 95.0 175 1 1 1 1 0 0 90-120 160 2.7 4.7 180 1 1 1 1 1 90-130 165 2.8 4.9 90-150 168 2.8 4.9 90-180 169 2.8 5.0 0-180 3403 56.7 100.0 1238 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Induction Lighting System Photometric Data Data based on fixtures with 85-watt lamp. For candlepower values of fixtures with other lamps, use the following multiplier: for 55 W lamp – 0.59 (3,500 lumens). Total Luminaire Efficiency = 63.4% Report Number: CMBQL85DD 85-Watt Lamp with Deep Dome Polyester Reflector CIE Type - Direct Degree Candela Lumens Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance (Rfc) = 0.20 0 1110 5 1109 106 % Ceiling Rc 15 1108 313 % Walls 25 1073 495 0 75 75 75 75 74 74 74 74 70 70 70 67 67 67 64 64 64 63 35 990 620 1 69 66 63 60 67 64 62 59 61 59 57 59 57 55 56 55 54 52 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 45 877 679 2 62 57 52 49 60 56 52 48 53 50 47 51 48 46 49 47 45 43 55 788 700 3 56 50 44 40 55 48 44 40 46 42 39 45 41 38 43 40 37 36 65 562 552 4 51 44 38 33 50 43 37 33 41 36 33 39 35 32 38 34 32 30 75 226 245 5 47 39 33 28 46 38 32 28 36 32 28 35 31 28 34 30 27 26 85 48 55 90 12 6 43 35 29 25 42 34 28 24 33 28 24 32 27 24 31 27 24 22 Zonal Lumen Summary 7 8 7 8 115 125 135 145 155 165 175 180 10 11 6 1 1 0 1 0 10 9 5 1 0 0 0 Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180 Lumens % Lamp % Fixture 15.2 24 9 35 26 21 17 34 26 20 17 25 20 17 24 20 17 23 19 17 15 1535 2914 3766 27 35 40 41 3806 25.6 48.6 62.8 0.4 0.6 0.7 0.7 63.4 40.3 76.5 98.9 0.7 0.9 1.1 1.1 100.0 10 32 24 19 15 32 24 19 15 23 18 15 22 18 15 22 18 15 14 Total Luminaire Efficiency = 56.4% Report Number: CMBQL85HB 85-Watt Lamp with High Bay Aluminum Reflector CIE Type - Direct Candela Lumens Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance (Rfc) = 0.20 0 2608 5 2578 244 % Ceiling Rc 15 2261 634 % Walls 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 25 1705 784 0 67 67 67 67 65 65 65 65 62 62 62 59 59 59 57 57 57 56 35 1237 774 1 63 61 60 58 62 60 59 57 58 56 55 55 54 54 53 53 52 51 45 770 588 2 59 56 53 51 58 55 52 50 53 51 49 51 49 48 49 48 47 46 55 241 228 3 55 51 48 45 54 50 47 45 49 46 44 47 45 43 46 44 42 41 65 66 69 4 52 47 43 40 51 46 43 40 45 42 39 43 41 39 42 40 38 37 75 15 17 5 49 43 39 36 48 42 39 36 41 38 36 40 37 35 39 37 35 34 85 3 4 90 2 6 46 40 36 33 45 39 35 33 38 35 32 37 34 32 36 34 32 31 Zonal Lumen Summary 7 43 37 33 30 42 36 32 30 35 32 30 35 32 29 34 31 29 28 95 5 5 Zone 105 10 10 0- 30 Lumens % Lamp % Fixture 1662 27.7 49.1 9 38 32 28 25 37 31 28 25 31 27 25 30 27 25 30 27 25 24 115 125 135 145 155 165 175 180 13 12 7 1 0 0 1 1 13 11 5 0 0 0 0 0- 40 0- 60 0- 90 90-120 90-130 90-150 90-180 0-180 2435 3251 3340 29 40 46 46 3386 40.6 54.2 55.7 0.5 0.7 0.8 0.8 56.4 71.9 96.0 98.6 0.9 1.2 1.3 1.4 100.0 10 36 30 26 23 35 29 26 23 29 25 23 28 25 23 28 25 23 22 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 8 40 34 30 27 40 34 30 27 33 30 27 32 29 27 32 29 27 26 1239 Lighting: Explosionproof — Area — Induction Degree 8 37 28 23 19 36 28 23 19 27 22 19 26 22 19 25 21 18 17 915 Lighting 95 105 7 40 31 26 22 39 31 25 21 30 25 21 29 24 21 28 24 21 19 Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Suitable for use in wet locations Exd IIB + H2 Suitable for use in wet locations CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2, Groups IIB + H2 T6 Class II, Division 1 and 2, Groups E, F, G Class III CSA 4X Applications • For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured, and in other areas where ignitable vapors, dust, moisture and corrosive elements may be present. • For use in areas where an instant-on white light is desired. • Suitable for use in wet locations. • Standard fixtures designed for 26 W, 32 W, 42 W, 52 W (two 26 W), 64 W (two 32 W), and 84 W (two 42 W) PLT lamps. • Cold weather starting to a minimum temperature of 0 °F/ -18 °C for the Code•Master Jr. PLT and -22 °F/-30 °C for the Code•Master 2 PLT. Lighting Lighting: Explosionproof — Area — Fluorescent Features • Fixtures operate safely in high ambient temperatures. • Arrangement of heat-producing components results in efficient heat dissipation for cooler fixture operation. • Patented “wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. The only wiring required is attaching two wires to connection block in mounting hood. • Connection block is easily wired: (a) loosen two screws; (b) make wire connections; and (c) reposition connection block. • Safe, easy servicing without disconnecting any wiring. “Wireless” fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a “stand-by” unit. • Acme double-lead threads speed installation and fixture removal from mounting hood – only half as many turns are required as for single-lead threads. The threads do not stick, or gall, eliminating problems often encountered with single-lead threads during fixture unit removal. • All threaded joints are flame-tight. • Factory sealed. External seals not required for Groups C and D. • Fixtures for use in Group B locations are furnished complete with UL required sealing fitting for Code•Master Jr. PLT only. • Heat- and impact-resistant globes have smooth dust-resistant exterior. • Superior corrosion resistance, with epoxy powder coat finish. • Fluorescent light source reduces energy cost. • Strategic location of lamp socket, in combination with interior prism design of the glass globe, provides optimum light distribution and control. • Choice of mountings – pendant, ceiling, bracket and stanchion. • Optional guards protect globes from damage. Secured to fixture with three stainless steel screws. • Fiberglass reinforced polyester reflectors, in standard dome or 30° angle styles, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. The high bay aluminum reflector is intended for installations where mounting height work planes range from 20 to 30 feet/6 to 9 meters. • Fluorescent lamp life of 10,000 hours reduces relamping cost compared to incandescent, and pr • Ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum • Pendant mounting hoods: diecast copperfree (4/10 of 1% max.) aluminum • Ceiling, bracket and stanchion mounting hoods: sand cast copperfree (4/10 of 1% max.) aluminum • Reflectors: fiberglass reinforced polyester (white) or aluminum 26-42W Code•Master Jr. PLT 52-84W Code•Master 2 PLT Illustrated Features Mounting Hood Collector Ring and Pin Connection Block Double Lead Acme Threads As Fixture unit is threaded into mounting hood an automatic electrical connection is made. Standard Finishes • Ballast bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection Certifications and Compliances • UL Standard: UL 1598, UL 844 • UL Listed: E10444 Fixtures are for use with Group B atmospheres only when used with Group B mounting hoods. For 26 W,32 W, and 42 W fixtures only. V CSA Certification only. 1240 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Suitable for use in wet locations Exd IIB + H2 Suitable for use in wet locations CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2, Groups IIB + H2 T6 Class II, Division 1 and 2, Groups E, F, G Class III CSA 4X Catalog Numbering Guide CJ F P 26 75 Mouning: P - Pendant C - Ceiling B - Bracket S - Stanchion PB - Group B Pendant ◆ SB - Group B Stanchion ◆ Series: CJ - Code•Master Jr. ◆ C - Code•Master 2 Hub Size: 75 - 3/4” 10 - 1” 150 - 1-1/2” or 1-1/4” Wattage: 26 - 26 Watts 32 - 32 Watts 42 - 42 Watts 52 - 52 Watts 64 - 64 Watts 84 - 84 Watts BU L Voltage: BU - 120-277 V 50/60 Hz A5 - 347 V 60 Hz V Guard: G - Guard provided Blank - Guard not provided Options: L - Lamps Provided F - Fused Z - Zone 1 Exd IIB + H2 V Classified Area Suitability of Code•Master™ Series PLT Fixtures — Suitability includes use of reflector Lamp Type PLT (4-pin) PLT (4-pin) PLT (4-pin) Class I, Division 1 & 2 with Globe or with Globe & Reflector UL/NEC Temp. Ident. No. Class II, Division 1 & 2 with Globe or with Globe & Reflector UL/NEC Temp. Ident. No. Supply Wire °F/°C Ambient Temp °F/°C Nameplate Marking Groups Nameplate Marking Groups 26 167/75 104/40 T6 B◆,C,D T4A E, F, G 32 167/75 104/40 T6 B◆,C,D T4A E, F, G 42 167/75 104/40 T6 B◆,C,D T4A E, F, G 167/75 167/75 167/75 167/75 167/75 167/75 167/75 167/75 167/75 104/40 131/55 149/65 104/40 131/55 149/65 104/40 131/55 149/65 T6 T5 T5 T6 T5 T5 T6 T5 T5 C, D C, D C, D C, D C, D C, D C, D C, D C, D T4 — — T4 — — T4 — — E, F, G — — E, F, G — — E, F, G — — PLT (4-pin) 52 (2 x 26) PLT (4-pin) 64 (2 x 32) PLT (4-pin) 84 (2 x 42) Lighting Lamp Watts “T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°˚C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86-100 85 Fixtures are for use with Group B atmospheres only when used with Group B mounting hoods. For 26 W,32 W, and 42 W fixtures only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Area — Fluorescent Lamp Type: F - Fluorescent G 1241 Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Suitable for use in wet locations Lamp Watts Hub Size (Inches) Catalog Number with Globe ➊ 26 3/4 CJFPB2675BU 32 3/4 CJFPB3275BU 42 3/4 CJFPB4275BU 26 1-1/2 CJFSB26150BU 32 1-1/2 CJFSB32150BU 42 1-1/2 CJFSB42150BU 25° Stanchion One Hub Mounting Hoods Hub Size Inches Catalog Number 3/4 CAP-75B 1-1/2 CAS-150B Pendant — One Hub Lighting Lighting: Explosionproof — Area — Fluorescent Pendant — One Hub, Rigid or Flexible Mounting 25° Stanchion — One Hub ➋ NOTE: Fixture units are the same as listed on following pages. Fixtures are for use with Group B atmospheres only when used with Group B mounting hoods. For 26 W,32 W, and 42 W fixtures only. ➊ To order fixture with guard, add suffix -G before adding voltage suffix. ➊ To order fixture with lamp(s), add suffix -L after voltage suffix. ➋ Malleable iron sealing fittings are available in the Fittings Section. 1242 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Suitable for use in wet locations CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2, Groups IIB + H2 T6 Class II, Division 1 and 2, Groups E, F, G Class III CSA 4X Lamp Watts Pendant — One Hub, Rigid or Flexible Mounting 26 (1 x 26) 32 (1 x 32) 42 (1 x 42) 52 (2 x 26) 64 (2 x 32) 26 (1 x 26) 32 (1 x 32) 42 (1 x 42) 52 (2 x 26) 64 (2 x 32) 84 (2 x 42) 52-84 W Shown Bracket — Four Hubs, Three Close-Up Plugs 26 (1 x 26) 32 (1 x 32) 42 (1 x 42) 64 (2 x 32) 26-42 W Shown 84 (2 x 42) 25° Stanchion — One Hub 26 (1 x 26) 32 (1 x 32) 42 (1 x 42) 52 (2 x 26) 64 (2 x 32) 84 (2 x 42) NEC/CEC V Catalog Number with Globe ➊➌ CEC V Catalog Number with Globe ➊➌ 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 CJFP2675BU CJFP2610BU CJFP3275BU CJFP3210BU CJFP4275BU CJFP4210BU CFP5275BU CFP5210BU CFP6475BU CFP6410BU CFP8475BU CFP8410BU CJFP2675A5 CJFP2610A5 CJFP3275A5 CJFP3210A5 CJFP4275A5 CJFP4210A5 CFP5275A5 CFP5210A5 CFP6475A5 CFP6410A5 CFP8475A5 CFP8410A5 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 CJFC2675BU CJFC2610BU CJFC3275BU CJFC3210BU CJFC4275BU CJFC4210BU CFC5275BU CFC5210BU CFC6475BU CFC6410BU CFC8475BU CFC8410BU CJFC2675A5 CJFC2610A5 CJFC3275A5 CJFC3210A5 CJFC4275A5 CJFC4210A5 CFC5275A5 CFC5210A5 CFC6475A5 CFC6410A5 CFC8475A5 CFC8410A5 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 CJFB2675BU CJFB2610BU CJFB3275BU CJFB3210BU CJFB4275BU CJFB4210BU CFB5275BU CFB5210BU CFB6475BU CFB6410BU CFB8475BU CFB8410BU CJFB2675A5 CJFB2610A5 CJFB3275A5 CJFB3210A5 CJFB4275A5 CJFB4210A5 CFB5275A5 CFB5210A5 CFB6475A5 CFB6410A5 CFB8475A5 CFB8410A5 1-1/4 or 1-1/2 ➋ 1-1/4 or 1-1/2 ➋ 1-1/4 or 1-1/2 ➋ 1-1/4 or 1-1/2 ➋ 1-1/4 or 1-1/2 ➋ 1-1/4 or 1-1/2 ➋ CJFS26150BU CJFS32150BU CJFS42150BU CFS52150BU CFS64150BU CFS84150BU CJFS26150A5 CJFS32150A5 CJFS42150A5 CFS52150A5 CFS64150A5 CFS84150A5 Lighting 52 (2 x 26) Hub Size (Inches) Lighting: Explosionproof — Area — Fluorescent 84 (2 x 42) 26-42 W Shown Ceiling — Four Hubs, Three Close-Up Plugs Exd IIB + H2 Suitable for use in wet locations 52-84 W Shown ➊ To order fixture with guard, add suffix -G before adding voltage suffix. To order fixture with lamp(s), add suffix -L after voltage suffix. ➋ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➌ BU is 120 through 277 V, 50/60 Hz and 125 Vdc. A5 is 347 V, 60 Hz V. V CSA Certification only. Shaded items are suitable for Class I, Group D ONLY. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1243 Code•Master™ PLT Factory Sealed Luminaire Mounting Hoods and Fixture Units Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Suitable for use in wet locations CEC: V Class I, Division 1 and 2, Groups B, C, D Class I, Zone 1 and 2, Groups IIB + H2 T6 Class II, Division 1 and 2, Groups E, F, G Class III CSA 4X Exd IIB + H2 Suitable for use in wet locations Mounting Hoods Hub Size (Inches) Catalog Number Pendant 3/4 CAP-75 1 CAP-100 3/4 CAC-75 1 CAC-100 3/4 CALB-75 1 CALB-100 1-1/4 or 1-1/2 ➊ CAS-150 ➊ Lighting: Explosionproof — Area — Fluorescent Ceiling Bracket 25° Stanchion Mounting Adapter with Connection Block CMAD-1 Fixture Units Line Voltage Hz Catalog Number 120-277 50/60 CJB26FBU ➋ 120-277 50/60 CJB32FBU ➋ 120-277 50/60 CJB42FBU ➋ 120-277 50/60 CMBF52BU 120-277 50/60 CMBF64BU 120-277 50/60 CMBF84BU Lighting Ballast body with globe 26-42 W 52-84 W Electrical Specification Lamp Wattage Line Voltage Frequency (Hz) Line Amps Input Watts Min. Starting Temp 26 (1 x 26) 120-277 50/60 0.25-0.11 28 0 °F/-18 °C 32 (1 x 32) 120-277 50/60 0.27-0.12 36 0 °F/-18 °C 42 (1 x 42) 120-277 50/60 0.35-0.16 48 0 °F/-18 °C 52 (2 x 26) 120-277 50/60 0.49-0.20 55 -22 °F/-30 °C 64 (2 x 32) 120-277 50/60 0.57-0.24 67 -22 °F/-30 °C 84 (2 x 42) 120-277 50/60 0.73-0.31 87 -22 °F/-30 °C ➊ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➋ Denotes items that are suitable for Class I, Group B in addition to Class I, Groups C and D; and Class II, Groups E, F and G. V CSA Certification only. Shaded items are suitable for Class I, Group C in addition to Class I, Group D; Class II, Groups E, F and G; and Class III. 1244 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ PLT Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. Catalog Number Description White Polyester Reflectors Furnished with stainless steel screws For Globe Fixtures Standard Dome 30° Angle Dome Standard Dome 26, 32, 42 W KR2-ST 30°Angle 26, 32, 42 W KR2-AN Standard Dome 52, 64, 84 W CMR-4ST 30°Angle 52, 64, 84 W CMR-4AN Deep Dome 52, 64, 84 W CMR-4DD High Bay 52, 64, 84 W CMR-4HB Aluminum Reflectors Lighting: Explosionproof — Area — Fluorescent Prismatic Glass Globe and Ring Assembly CJGL-175 26, 32, 42 W CJGL-175 52, 64, 84 W CGL-400 26, 32, 42 W CJGU-15 52, 64, 84 W CGU-4 CGL-400 Aluminum Guards CJGU-15 CGU-4 Lighting Three-Way Exit Sign Epoxy enameled steel — 6”-high red lettering Mounts to fixture units in place of guard. 26, 32, 42 W CJEXRN 52, 64, 84 W EXR400 Single Sided Exit Sign Epoxy enameled steel — 6”-high red lettering Mounts to fixture units in place of guard. Contact your sales representative regarding hazardous location suitability. 26, 32, 42 W Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 AEXR-15R 1245 Code•Master™ PLT Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. Description Catalog Number Replacement Parts – 26 W, 32 W, 42 W, 52 W, 64 W and 84 W Lighting: Explosionproof — Area — Fluorescent PLT32RS CJSA42 Socket (lampholder) G24Q-4 26 thru 84 W PLT32RS Single Socket Bracket Assembly 26, 32, 42 W CJSA42 Double Socket Bracket Assembly 52, 64, 84 W CSA84 1 lamp = 26 W; 2 lamps = 52 W 26 W PLT26 1 lamp = 32 W; 2 lamps = 64 W 32 W PLT32 1 lamp = 42 W; 2 lamps = 84 W 42 W PLT42 26, 32, 42 W 59661256001 52, 64, 84 W 59661259001 CSA84 Lamps Replacement Ballast Connection Block VPT-7 Lighting For all Code•Master fixtures Fixture and Accessory Weights lbs/kgs Mounting Hood Weights lbs/kgs Fixture Size Fixture Weight Reflector Weight Guard Weight Pendant Ceiling Bracket Stanchion 26 W, 32 W, 42 W 14.5/6.6 3.0/1.4 1.0/0.5 2/0.9 4/1.8 6/2.7 2/0.9 52 W, 64 W, 84 W 35.0/15.9 3.0/1.4 2.5/1.1 Reflector Dimensions Catalog Number Description Standard Dome KR2-ST 26, 32, 42 W CMR-4ST 52, 64, 84 W Deep Dome CMR-4DD 52, 64, 84 W 30° Angle KR2-AN 26, 32, 42 W CMR-4AN 52, 64, 84 W 1246 A Dimensions in In/mm B C D Standard and Deep Dome 30° Angle A 8.00/203.2 11.20/284.5 6.00/152.4 5.90/149.9 16.90/429.3 18.70/475.0 — — 10.56/268.2 7.00/177.8 20.30/515.6 — A B B D C 8.00/203.2 10.56/268.2 2.75/69.9 5.00/127 14.90/378.5 16.16/410.5 10.17/258.3 9.75/247.7 C Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ PLT Factory Sealed Luminaire Dimensions Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. Mounting Hoods Pendant Ceiling Bracket 4.00"/ 101.6 mm 9.86"/ 250.4 mm 4.00"/ 101.6 mm 17.61"/ 447.3 mm 4.25"/ 108.0 mm 4.92"/125.0 mm Sq. 4.50"/ 114.3 mm 20.50"/ 520.7 mm 9.50"/ 241.3 mm 6.10"/ 155.0 mm 2.46"/ 2.28"/ 62.9 mm 57.9 mm 3.91"/99.3 mm 21.50"/ 546.1 mm 25° Stanchion 1.23"/ 31.2 mm 3.48"/ 88.4 mm 3.92"/ 99.6 mm 5.92"/ 150.4 mm 1.79"/ 45.7 mm 2.38"/ 60.5 mm Dia. 4.50"/ 114.3 mm Dia. 11.5"/ 292.1 mm 13.75"/ 349.3 mm 12.00"/ 304.8 mm 26, 32, 42 W Fixture 17.87"/ 453.9 mm 16.00"/ 406.4 mm 16.88"/ 428.8 mm 17.47"/ 443.7 mm 7.40"/ 188.0 mm 18.12"/ 460.2 mm 7.40"/ 188.0 mm 14.12"/ 358.6 mm 14.12"/ 358.6 mm 16.25"/ 412.8 mm 16.00"/ 406.4 mm 8.00"/ 203.2 mm 8.00"/ 203.2 mm 15.62"/ 396.7 mm 16.25"/ 412.8 mm 4.00"/ 101.6 mm 3.75"/95.3 mm 7.40"/ 188.0 mm 17.22"/ 437.9 mm 23.61"/ 599.7 mm 24.61"/ 625.1 mm 20.36"/ 517.1 mm 9.86"/ 250.4 mm 20.36"/ 517.1 mm 17.5"/ 444.5 mm 12.0"/ 304.8 mm 12.0"/ 304.8 mm Lighting 20.36"/ 517.1 mm 9.86"/ 250.4 mm 24.36"/ 618.7 mm 9.86"/ 250.4 mm 23.36"/ 593.3 mm 23.5"/ 596.9 mm 24.5"/ 622.3 mm 3.91"/ 99.3 mm 21.2"/ 538.5 mm 22.2"/ 563.9 mm 52, 64, 84 W Fixture 5.5"/ 139.7 mm 17.5"/ 444.5 mm Exit Signs 9.25"/ 235.0 mm 6.88"/ 174.8 mm 11.75"/298.5 mm 12.00"/ 304.8 mm CJEXRN Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Area — Fluorescent 0.94"/ 23.9 mm 4.58"/ 116.3 mm Dia. 8.50"/ 215.9 mm AEXR-15R 1247 Code•Master™ PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. * Photometric data is based on a fixture with a 32 W compact fluorescent PL-T lamp (2,400 lumens). For candlepower values of fixtures with 26 W PL-T lamps (1,800 lumens), multiply by 0.75. For candlepower values of fixtures with a 42 W PL-T Lamp (3,200 lumens), multiply by 1.34. Total Luminaire Efficiency = 92.9% CIE Type - Semi-Direct Plane Spacing Criteria 0-180 2.76 90-270 2.76 Diagonal 2.72 REPORT NUMBER: CJBF32G 32 W Fluorescent Lamp with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Explosionproof — Area — Fluorescent % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 9.75 32.89 68.63 119.65 174.44 219.68 252.32 278.38 283.11 266.38 231.16 110-120 166.66 120-130 130-140 140-150 150-160 160-170 170-180 91.63 31.38 2.95 0.19 0.00 0.00 0 1 2 3 4 5 6 7 8 9 10 Maximum Candela = 265 Located at Horizontal Angle = 0, Vertical Angle = 77.5 #1 - Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 - Horizontal Cone through Vertical Angle (77.5) (Through Max. Cd.) CIE Type - Direct Lighting Plane Spacing Criteria 1.42 90-270 1.42 Diagonal 1.60 Zone 0-30 0-40 0-60 0-90 110-120 6.82 5.50 3.07 0.09 0.00 0.00 0.00 1248 30 10 0 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 103 88 78 69 63 57 52 48 44 41 38 103 81 67 57 50 43 38 34 31 28 25 103 75 59 48 40 34 29 25 22 20 18 103 70 52 41 33 27 23 19 17 14 13 97 82 72 64 58 52 48 44 41 38 35 97 76 63 53 46 40 36 32 29 26 24 97 70 55 45 37 32 27 24 21 19 17 97 65 49 38 31 25 21 18 16 14 12 85 65 54 46 39 35 31 27 25 23 21 85 61 48 39 32 27 24 21 18 16 15 85 57 43 33 27 22 18 16 14 12 10 74 56 46 39 33 29 26 23 21 19 18 74 53 41 33 28 23 20 18 16 14 12 74 50 37 29 23 19 16 13 11 10 9 65 48 38 32 28 24 21 19 18 16 15 65 45 35 28 23 19 17 15 13 12 10 65 42 31 24 19 16 13 11 9 8 7 60 38 27 20 16 13 10 9 7 6 5 Lumens 111.27 230.92 625.05 1438.87 % Lamp 4.6 9.6 26.0 60.0 % Fixture 5.0 10.4 28.0 64.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 664.20 755.83 790.17 790.36 2229.23 % Lamp 27.7 31.5 32.9 32.9 92.9 % Fixture 29.8 33.9 33.9 35.5 100.0 Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lumens 51.88 151.03 240.04 312.02 361.09 377.88 278.20 119.22 23.81 0.68 4.48 120-130 130-140 140-150 150-160 160-170 170-180 50 50 REPORT NUMBER: CJBF32ST 32 W Fluorescent Lamp with Globe and Standard Dome Reflector * % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 70 70 Zonal Lumen Summary Total Luminaire Efficiency = 80.7% 0-180 Rw 80 Rw 0 1 2 3 4 5 6 7 8 9 10 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 96 87 79 72 65 60 55 51 47 44 41 96 84 72 63 55 49 44 39 36 33 30 96 80 67 56 48 41 36 32 29 26 23 96 77 62 51 42 36 31 27 24 21 19 93 85 77 70 63 58 53 49 46 43 40 93 82 71 62 54 48 43 39 35 32 30 93 78 66 55 47 41 36 32 28 26 23 93 76 61 50 42 36 31 27 24 21 19 89 78 68 59 52 46 41 37 34 31 29 89 75 63 54 46 40 35 31 28 25 23 89 73 60 49 41 35 30 27 23 21 19 85 75 65 57 50 44 40 36 33 30 28 85 73 61 52 45 39 34 30 27 25 23 85 71 58 48 41 35 30 26 23 21 19 82 72 62 54 48 43 39 35 32 29 27 82 70 59 51 44 38 34 30 27 24 22 82 68 57 47 40 34 30 26 23 21 19 80 67 55 45 38 32 28 24 21 19 17 Zonal Lumen Summary Maximum Candela = 545 Located at Horizontal Angle = 0, Vertical Angle = 5 #1 - Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 - Horizontal Cone through Vertical Angle (5) (Through Max. Cd.) Zone 0-30 0-40 0-60 0-90 Lumens 442.95 754.97 1493.95 1915.18 % Lamp 18.5 31.5 62.2 79.8 % Fixture 22.9 39.0 77.2 98.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 11.98 17.48 20.63 20.63 1935.81 % Lamp 0.5 0.7 0.9 0.9 80.7 % Fixture 0.6 0.9 0.9 1.1 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. * Photometric data is based on a fixture with a 32 W compact fluorescent PL-T lamp (2,400 lumens). For candlepower values of fixtures with 26 W PL-T lamps (1,800 lumens), multiply by 0.75. For candlepower values of fixtures with a 42 W PL-T Lamp (3,200 lumens), multiply by 1.34. ** Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W Total Luminaire Efficiency = 76.6% CIE Type - Direct Plane Spacing Criteria 0-180 1.48 90-270 1.62 Diagonal 1.54 REPORT NUMBER: CJBF32AN 32 W Fluorescent Lamp with Globe and 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Lumens 42.08 124.46 205.20 273.31 299.53 283.93 240.60 181.91 110.47 50.28 18.05 110-120 5.01 120-130 130-140 140-150 150-160 160-170 170-180 1.80 1.13 0.05 0.00 0.00 0.00 0 1 2 3 4 5 6 7 8 9 10 Maximum Candela = 467 Located at Horizontal Angle = 90, Vertical Angle = 40 #1 - Vertical Plane through Horizontal Angles (90-270) (Through Max. Cd.) #2 - Horizontal Cone through Vertical Angle (40) (Through Max. Cd.) CIE Type - Semi-Direct Plane Spacing Criteria 2.88 Diagonal 2.82 Zone 0-30 0-40 0-60 0-90 Lumens 17.70 61.05 132.44 236.78 336.66 421.68 485.34 517.29 513.72 468.70 352.77 110-120 200.85 120-130 73.54 130-140 140-150 150-160 160-170 170-180 11.28 1.12 0.31 0.06 0.00 30 10 0 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 90 81 73 66 60 55 50 47 43 40 38 90 76 65 57 50 44 39 36 32 30 27 90 72 59 50 42 37 32 28 25 23 21 90 69 54 44 37 31 27 23 21 18 17 88 78 70 63 58 53 49 45 42 39 36 88 74 64 55 48 43 39 35 32 29 27 88 71 58 49 42 36 32 28 25 23 21 88 67 53 44 36 31 27 23 21 18 17 83 70 60 52 46 41 37 33 30 28 26 83 67 56 47 40 35 31 27 24 22 20 83 64 52 42 35 30 26 23 20 18 16 79 67 57 50 44 39 35 32 29 27 25 79 64 53 45 39 34 30 26 24 22 20 79 62 50 41 35 30 26 22 20 18 16 75 63 54 47 42 37 34 31 28 26 24 75 61 51 43 37 33 29 26 23 21 19 75 59 48 40 34 29 25 22 20 18 16 73 58 46 38 32 27 23 20 18 16 14 Lumens 371.75 645.06 1228.52 1761.50 % Lamp 15.5 26.9 51.2 73.4 % Fixture 20.2 35.1 66.8 95.8 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 73.34 75.13 76.32 76.32 1837.81 % Lamp 3.1 3.1 3.2 3.2 76.6 % Fixture 4.0 4.1 4.1 4.2 100.0 REPORT NUMBER: CMBF64G 64 W (two 32 W lamps) Fluorescent Fixture with Globe only ** Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 50 50 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 90 76 67 60 54 49 45 41 38 35 33 90 70 58 49 43 37 33 29 26 24 22 90 65 51 41 34 29 25 22 19 17 15 90 60 45 35 28 23 19 16 14 12 11 85 71 63 56 50 46 42 38 36 33 31 85 66 55 46 40 35 31 28 25 23 21 85 61 48 39 32 27 23 20 18 16 14 85 57 42 33 26 22 18 15 13 11 10 76 58 48 40 35 31 27 24 22 20 18 76 54 43 34 28 24 21 18 16 14 13 76 51 38 29 23 19 16 14 12 10 9 68 51 42 35 30 26 23 21 19 17 16 68 48 37 30 25 21 18 16 14 12 11 68 45 34 26 21 17 14 12 10 9 8 60 45 36 30 26 23 20 18 16 15 14 60 42 32 26 21 18 16 14 12 11 10 60 40 29 23 18 15 12 10 9 8 7 57 36 26 20 15 12 10 8 7 9 5 Zonal Lumen Summary Maximum Candela = 493 Located at Horizontal Angle = 0, Vertical Angle = 70 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (70) (Through Max. Cd.) Zone 0-30 0-40 0-60 0-90 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumens 211.19 447.97 1206.31 2722.64 % Lamp 4.4 9.3 25.1 56.7 % Fixture 5.5 11.7 31.5 71.1 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1022.32 1095.85 1108.26 1108.63 3831.28 % Lamp 21.3 22.8 23.1 23.1 79.8 % Fixture 26.7 28.6 28.6 28.9 100.0 1249 Lighting 2.88 90-270 70 70 Zonal Lumen Summary Total Luminaire Efficiency = 79.8% 0-180 Rw 80 Lighting: Explosionproof — Area — Fluorescent Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 PL-T Lamps. (3,200 lumens each) multiply by 1.34. Code•Master™ PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. ** Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T lamps. (3,200 lumens each) multiply by 1.34. Total Luminaire Efficiency = 66.5% CIE Type - Direct Plane Spacing Criteria 0-180 1.62 90-270 1.62 Diagonal 1.74 REPORT NUMBER: CMBF64ST 64 W (two 32 W lamps) Fluorescent Fixture with Globe and Standard Dome Reflector ** Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Explosionproof — Area — Fluorescent % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 73.25 220.57 368.60 505.61 603.19 638.42 497.24 226.17 57.98 1.64 0.00 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 Maximum Candela = 808 Located at Horizontal Angle = 0, Vertical Angle = 35 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (35) (Through Max. Cd.) CIE Type - Direct Lighting Spacing Criteria 0-180 1.52 90-270 1.70 Diagonal 1.62 Zone 0-30 0-40 0-60 0-90 110-120 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1250 30 10 0 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 79 72 65 59 53 49 45 41 38 35 33 79 69 59 51 45 39 35 32 29 26 24 79 66 54 45 38 33 29 25 23 20 18 79 63 50 41 34 28 24 21 19 16 15 77 70 63 57 52 47 43 40 37 34 32 77 67 58 50 44 39 34 31 28 26 24 77 64 53 45 38 33 29 25 22 20 18 77 62 49 40 33 28 24 21 18 16 15 74 64 55 48 42 37 33 30 27 25 23 74 62 52 43 37 32 28 25 22 20 18 74 60 48 40 33 28 24 21 18 16 15 71 62 53 46 40 36 32 29 26 24 22 71 60 50 42 36 31 27 24 22 19 18 71 58 47 39 32 28 24 21 18 16 15 68 59 51 44 39 35 31 28 26 23 22 68 58 48 41 35 31 27 24 21 19 17 68 56 46 38 32 27 23 20 18 16 14 66 55 45 37 30 26 22 19 17 15 13 Lumens 662.42 1168.03 2409.64 3191.04 % Lamp 13.8 24.3 50.2 66.5 % Fixture 20.7 36.6 75.5 99.9 Zone Lumens 90-120 1.64 90-130 1.64 90-150 1.64 90-180 1.64 0-180 3192.68 % Lamp 0.0 0.0 0.0 0.0 66.5 % Fixture 0.1 0.1 0.1 0.1 100.0 Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lumens 62.13 187.93 317.49 428.14 471.22 454.23 384.77 276.31 157.68 13.45 0.00 120-130 130-140 140-150 150-160 160-170 170-180 50 70 REPORT NUMBER: CMBF64AN 64 W (two 32 W lamps) Fluorescent Fixture with Globe and 30° Angle Dome Reflector ** % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 70 Rw Zonal Lumen Summary Total Luminaire Efficiency = 57.4% Plane 80 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 68 61 55 50 45 41 38 35 32 30 28 68 58 49 43 37 33 30 27 24 22 20 68 55 45 37 32 28 24 21 19 17 16 68 52 41 33 28 23 20 18 16 14 12 67 59 53 48 44 40 37 34 32 29 28 67 56 48 42 37 32 29 26 24 22 20 67 54 44 37 31 27 24 21 19 17 15 67 51 40 33 27 23 20 18 15 14 12 64 54 46 40 35 31 28 25 23 21 19 64 51 43 36 31 27 23 21 19 17 15 64 49 39 32 27 23 20 17 15 14 12 61 51 44 38 34 30 27 24 22 20 19 61 49 41 35 30 26 23 20 18 16 15 61 48 39 32 27 23 20 17 15 14 12 58 49 42 37 32 29 26 24 22 20 18 58 48 40 34 29 25 22 20 18 16 15 58 46 38 31 26 22 19 17 15 13 12 57 45 36 30 25 21 18 16 14 12 11 Zonal Lumen Summary Maximum Candela = 731 Located at Horizontal Angle = 90, Vertical Angle = 37.5 #1 – Vertical Plane through Horizontal Angles (90-270) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (37.5) (Through Max. Cd.) Zone 0-30 0-40 0-60 0-90 Lumens 567.55 995.69 1921.14 2739.90 % Lamp 11.8 20.7 40.0 57.1 % Fixture 20.6 36.2 69.8 99.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 13.45 13.45 13.45 13.45 2753.35 % Lamp 0.3 0.3 0.3 0.3 57.4 % Fixture 0.5 0.5 0.5 0.5 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. ** Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34. Total Luminaire Efficiency = 67.2% CIE Type - Direct Plane Spacing Criteria 0-180 1.44 90-270 1.44 Diagonal 1.60 REPORT NUMBER: CMBF64DD 64 W (two 32 W lamps) Fluorescent Fixture with Globe and Deep Dome Reflector ** Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls 90-100 100-110 Lumens 88.95 260.61 413.34 539.82 630.36 641.74 436.60 164.84 47.37 1.92 0.00 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 Maximum Candela = 933 Located at Horizontal Angle = 0, Vertical Angle = 7.5 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (7.5) (Through Max. Cd.) CIE Type - Direct Plane Spacing Criteria 0.82 Diagonal 0.92 Zone 0-30 0-40 0-60 0-90 Lumens 239.15 599.67 645.20 625.54 452.95 185.71 58.40 15.26 4.25 0.69 0.00 110-120 0.00 120-130 130-140 140-150 150-160 160-170 170-180 0.00 0.00 0.00 0.00 0.00 0.00 10 0 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 80 73 66 60 55 50 46 43 40 37 34 80 70 61 53 47 41 37 33 30 28 25 80 67 56 47 41 35 31 27 24 22 20 80 65 52 43 36 31 26 23 20 18 16 78 71 65 59 53 49 45 41 38 36 34 78 68 59 52 46 41 36 33 30 27 25 78 66 55 47 40 35 30 27 24 22 20 78 63 52 43 36 30 26 23 20 18 16 75 66 57 50 44 39 35 32 29 26 24 75 63 53 45 39 34 30 27 24 21 19 75 61 50 42 35 30 26 23 20 18 16 71 63 55 48 42 38 34 31 28 26 24 71 61 52 44 38 33 29 26 23 21 19 71 60 49 41 35 30 26 23 20 18 16 69 60 53 46 41 37 33 30 27 25 23 69 59 50 43 37 33 29 26 23 21 19 69 58 48 40 34 29 25 22 20 18 16 67 56 47 39 33 28 24 21 19 16 15 Lumens 762.91 1302.73 2574.82 3223.63 % Lamp 15.9 27.1 53.6 67.2 % Fixture 23.7 40.4 79.8 99.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1.92 1.92 1.92 1.92 3225.55 % Lamp 0.0 0.0 0.0 0.0 57.4 % Fixture 0.1 0.1 0.1 0.1 100.0 REPORT NUMBER: CMBF64HB 64 W (two 32 W lamps) Fluorescent Fixture with Globe and High Bay Reflector ** Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 30 50 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 70 66 62 58 55 51 48 46 43 41 38 70 64 59 54 50 46 42 39 37 34 32 70 63 56 51 46 42 38 35 33 30 28 70 61 54 48 43 39 35 32 30 28 26 68 65 61 57 54 50 47 45 42 40 38 68 63 58 53 49 45 42 39 36 34 32 68 62 55 50 45 41 38 35 32 30 28 68 60 53 47 43 39 35 32 30 28 26 65 61 56 51 48 44 41 38 36 33 31 65 59 54 49 44 41 37 35 32 30 28 65 58 52 47 42 38 35 32 30 27 26 63 58 54 50 46 43 40 37 35 33 31 63 57 52 48 44 40 37 34 32 30 28 63 57 51 46 42 38 35 32 29 27 25 60 56 52 49 45 42 39 37 34 32 30 60 56 51 47 43 39 36 34 31 29 27 60 55 50 45 41 37 34 32 29 27 25 59 54 49 44 40 36 33 31 28 26 25 Zonal Lumen Summary Maximum Candela = 2540 Located at Horzonatl Angle = 0, Vertical Angle = 5 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (5) (Through Max. Cd.) Zone 0-30 0-40 0-60 0-90 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumens 1484.03 2109.57 2748.23 2826.12 % Lamp 30.9 43.9 57.3 58.9 % Fixture 52.5 74.6 97.2 100.0 Zone Lumens 90-120 0.69 90-130 0.69 90-150 0.69 90-180 0.69 0-180 2628.80 % Lamp 0.0 0.0 0.0 0.0 58.9 % Fixture 0.0 0.0 0.0 0.0 100.0 1251 Lighting 0.82 90-270 50 70 Zonal Lumen Summary Total Luminaire Efficiency = 58.9% 0-180 70 Rw Lighting: Explosionproof — Area — Fluorescent Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 80 APL Two and Four Lamp Fluorescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 120-277 V, 120 V V, 277 V V, 347 V V, 50/60 Hz. For use with Threaded Metal Conduit. Suitable for Wet Locations and Paint Spray Booths. Class I, Division 1 and 2, Groups C,D Class II, Division 1 and 2, Groups E,F,G Class III Marine Type Electric Fixture Inside Drip-Proof Type Applications • Classified areas where ignitable gases and vapors, dusts, paint residue, paint powder, or corrosive atmospheres may be present, or where excessive moisture is a problem. • Approved for mounting directly inside a paint spray booth. Complies with NEC 516-3(b) and NFPA No. 33. • Typical applications include refineries, chemical and petrochemical plants, textile mills, grain elevators and other grain-processing facilities, pharmaceutical plants, and paint spray areas. Two Lamp APL Lighting Lighting: Explosionproof — Area — Fluorescent Features • Factory sealed fixture. No external seals needed for classified areas. • Two lamp: — Compact size — Uses two single-ended biaxial 40 W fluorescent lamps in a fixture only 29”/736.6 mm long — Available for 120-277 V, 50/60 Hz — Available for 120 V, 277 V, 347 V, 50/60 Hz V • Four lamp: — Uses four single-ended biaxial 40 W fluorescent lamps mounted tandem in a 52-1/2”/1333.5 mm long fixture — Available for 120-277 V, 50/60 Hz — Available for 120 V, 277 V, 347 V, 50/60 Hz V • Easy to install. Has three 3/4”/19.1 mm conduit hubs on each end of fixture. Two close-up plugs per end are furnished. Mounts straight down, or at 45° angle to either side. Can be mounted horizontally, or mounted vertically on wall. Gasketed end caps remove easily for wiring or relamping. • Explosionproof, heat-resistant and impact-resistant glass tubes protect lamps. • Cool-operating fluorescent lamps provide excellent color rendition and high lumen output per watt. Average lamp life is 20,000 hours. Lamps are furnished. • Corrosion resistant. • Reflector (optional) is designed for efficient distribution. Installs and removes using only a screwdriver. • Appleton APL fixtures are supplied with energy-saving Class P ballasts, equipped with an automatic thermally activated protective device. Two Lamp APL with Optional Reflector Four Lamp APL Standard Materials • End housing: copperfree (4/10 of 1% max.) aluminum • Housing hood and optional reflectors: heavy gauge aluminum • Wire guard: stainless steel Four Lamp APL with Optional Reflector Standard Finishes • End housings and hood: two-coat baked gray epoxy finish • Reflector: white baked powder coat polyester reflecting surface Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10794 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 Illustrated Feature APL Fixture shown with explosionproof, gasketed end caps removed, allowing access for wiring and relamping. V CSA Certification only. 1252 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 APL Two and Four Lamp Fluorescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 120-277 V, 120 V V, 277 V V, 347 V V, 50/60 Hz. For use with Threaded Metal Conduit. Suitable for Wet Locations and Paint Spray Booths. Class I, Division 1 and 2, Groups C,D Class II, Division 1 and 2, Groups E,F,G Class III Marine Type Electric Fixture Inside Drip-Proof Type Lamps (Included) Volts Hub Size (Inches) Temperature Rating Supply Wire °F/°C Catalog Number (2) 40 W F40BX 120-277 3/4 T-6 140/60 APL240BU (2) 40 W F40BX 3477 3/4 T-6 140/60 APL240-347 V (4) 40 W F40BX 120-277 3/4 T6 140/60 APL440BU (4) 40W F40BX 347 3/4 T-6 60°C Luminaires Without Reflector Two Lamp Four Lamp Aluminum reflector with white powder coat polyester finish Two Lamp APL2R Four Lamp APL4R Two Lamp APL-2-GU-SS Four Lamp ARS-GU-SS Wire Guard Lighting: Explosionproof — Area — Fluorescent APL440-347 V Exit Sign — 6” red lettering on white enamel field Two Lamp Only APLEXR Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1253 APL Two Lamp Factory Sealed Luminaire Dimensions and Photometric Data Explosionproof, Dust-Ignitionproof 120-277 V, 120 V V, 277 V V, 347 V V, 50/60 Hz. For use with Threaded Metal Conduit. Suitable for Wet Locations and Paint Spray Booths. Dimensions (3) 3/4" Conduit Holes on Each End, Furnished with Two Close-Up Plugs 5.5"/ 139.7 mm 22.75"/ 577.9 mm 29.00"/ 736.6 mm 7.75"/ 196.9 mm 8.75"/ 222.3 mm 8.75"/ 222.3 mm 16.00"/ 406.4 mm End View —With Optional Reflector Side View — Without Optional Reflector Lighting Lighting: Explosionproof — Area — Fluorescent APL240 Photometric Data Total Luminaire Efficiency = 81.4% CIE Type - Direct Plane Spacing Criteria 0-180 1.28 90-270 1.50 Diagonal 1.54 Zone Lumens REPORT NUMBER: APL240R Lamps: Two 40 W Two-Foot Explosionproof Fluorescent Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw 80 70 50 70 30 10 70 50 50 30 10 50 30 30 10 50 30 10 10 50 30 0 10 0 0 97 97 97 97 95 95 95 95 90 90 90 87 87 87 83 83 83 81 0-10 143.58 1 88 84 81 77 86 82 79 76 79 76 74 76 73 71 73 71 69 68 10-20 422.85 2 80 73 67 62 78 71 66 62 68 64 60 66 62 59 63 60 57 56 20-30 667.66 3 72 64 57 51 70 62 56 51 60 54 50 58 53 49 55 51 48 46 30-40 852.03 4 66 56 49 43 64 55 48 43 53 47 42 51 46 41 49 45 41 39 40-50 948.58 5 61 50 42 37 59 49 42 36 47 41 36 45 40 35 44 39 35 33 50-60 920.43 6 56 44 37 32 54 44 37 31 42 36 31 41 35 31 40 34 31 29 60-70 709.76 7 52 40 33 28 50 39 33 28 38 32 27 37 31 27 36 31 27 25 70-80 373.12 8 48 37 29 24 47 36 29 24 35 29 24 34 28 24 33 28 24 22 80-90 87.31 9 45 33 27 22 43 33 26 22 32 26 22 31 26 22 30 25 21 20 90-100 0.00 10 42 31 24 20 41 30 24 20 29 24 20 29 23 19 28 23 19 18 100-110 0.00 110-120 0.00 Zonal Lumen Summary 120-130 0.00 Zone Lumens % Lamp % Fixture Zone Lumens % Lamp 130-140 0.00 0-30 1234.09 19.6 24.1 90-120 0.00 0.0 140-150 0.00 0-40 2086.12 33.1 40.7 90-130 0.00 0.0 0.0 150-160 0.00 0-60 3955.13 62.8 77.2 90-150 0.00 0.0 0.0 160-170 0.00 0-90 5125.31 81.4 100.0 90-180 0.00 0.0 0.0 170-180 0.00 5125.32 81.4 100.0 0-180 % Fixture 0.0 V CSA Certification only. 1254 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 APL Four Lamp Fluorescent Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof 120-277 V, 120 V V, 277 V V, 347 V V, 50/60 Hz. For use with Threaded Metal Conduit. Suitable for Wet Locations and Paint Spray Booths. Total Luminaire Efficiency = 79.9% REPORT NUMBER: APL440R Lamps: Four 40 W Explosionproof Fluorescent CIE Type - Direct Plane Spacing Criteria 0-180 1.30 Coefficients of Utilization - Zonal Cavity Method 90-270 1.50 Effective Floor Cavity Reflectance 0.20 Diagonal 1.54 % Ceiling Rcc % Walls Rw Zone 50 70 30 10 70 50 50 30 10 50 30 30 10 50 30 10 10 50 30 0 10 0 Lumens 0 95 95 95 95 93 93 93 93 89 89 89 85 85 85 82 82 82 80 277.70 1 87 83 79 76 85 81 78 75 78 75 73 74 72 70 72 70 68 67 10-20 817.61 2 78 72 66 61 76 70 65 61 67 63 59 65 61 58 62 59 56 55 20-30 1291.05 3 71 62 56 50 69 61 55 50 59 53 49 57 52 48 54 51 47 45 30-40 1648.83 4 65 55 48 42 63 54 47 42 52 46 41 50 45 41 48 44 40 38 40-50 1837.13 5 59 49 41 36 58 48 41 36 46 40 35 45 39 35 43 38 35 33 50-60 1787.64 6 55 44 36 31 53 43 36 31 41 35 31 40 35 30 39 34 30 28 60-70 1379.79 7 51 39 32 27 49 39 32 27 38 31 27 36 31 27 35 30 26 25 70-80 722.47 8 47 36 29 24 46 35 29 24 34 28 24 33 28 24 32 27 24 22 80-90 148.89 9 44 33 26 22 43 32 26 21 31 25 21 31 25 21 30 25 21 20 10 41 30 24 19 40 30 24 19 29 23 19 28 23 19 28 23 19 18 90-100 0.00 100-110 0.00 110-120 0.00 Zonal Lumen Summary 0.00 Zone Lumens % Lamp % Fixture Zone Lumens % Lamp 0.00 0-30 2386.36 19.2 24.1 90-120 0.00 0.0 0.0 140-150 0.00 0-40 4035.19 32.5 40.7 90-130 0.00 0.0 0.0 150-160 0.00 0-60 7659.96 61.8 77.3 90-150 0.00 0.0 0.0 160-170 0.00 0-90 9911.11 79.9 100.0 90-180 0.00 0.0 0.0 170-180 0.00 9911.11 79.9 100.0 0-180 (3) 3/4" Conduit Holes on Each End, Furnished with Two Close-Up Plugs 5.5"/139.7 mm % Fixture 46.63"/ 1184.4 mm 52.5"/ 1333.5 mm 7.75"/ 196.9 mm 8.75"/ 222.3 mm 8.75"/ 222.3 mm 16.00"/ 406.4 mm Side View — Without Optional Reflector End View —With Optional Reflector V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1255 Lighting 120-130 130-140 Lighting: Explosionproof — Area — Fluorescent 0-10 80 70 EFU Fluorescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit Suitable for use in Wet Locations Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • Classified areas such as inside paint spray booths, in pharmaceutical firms, paint-manufacturing plants, printing plants or any location where ignitable dust, fumes, gases, paint residue, paint powder or corrosive atmospheres may be present. Lighting: Explosionproof — Area — Fluorescent Features • Factory sealed unit – no external seals required. Installation is easy. • A wide range of ballasts and voltages are available for both domestic and export applications. • Three hubs on each end of fixture provide for straight-down mounting or at 45° to either side. Two close-up plugs furnished for each end of fixture. • Explosionproof, impact-resistant and heat-resistant glass tubes protect lamps. • Reflectors can easily be removed for replacement or cleaning using only a screwdriver. • Appleton EFU fixtures are supplied with Class P ballasts, equipped with an automatic thermally activated protective device. They offer protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application. • Non-sparking exterior surfaces for safer operation. Standard Materials • Hood, housings and reflectors: copperfree (4/10 of 1% max.) aluminum • Hood and housings: gray epoxy finish • Reflectors: white baked enamel inside and gray epoxy outside Options • Emergency battery pack. Suffix -EL. • Fusing: ARS, AH and AVH fixtures supplied as standard with Class P ballasts with built-in protective device. Additional external fusing available at extra cost. Suffix -F. Lighting Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10794 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 Explosionproof caps easily removed (shown with caps removed) for easy access. Allows quick wiring or relamping. 1256 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFU Fluorescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit Suitable for use in Wet Locations Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Lamp Volts Two Lamps Rapid Start VHO-SHO T-12 Recessed Double Contact 48” 1500MA Catalog Number ➋ 120-277 V, 50/60 Hz 3/4 T-6 140/60 ARS232-BU ➊ 347 V, 60 Hz 3/4 T-6 140/60 ARS232-347 V➊ 120-277 V, 50/60 Hz 3/4 T-6 140/60 ARS240-BU ➊ 347 V, 60 Hz 3/4 T-6 140/60 ARS240-347 V➊ 120-277 V, 50/60 Hz 3/4 T-6 140/60 AH260-BU 347 V, 60 Hz 3/4 T-6 140/60 AH260-347 V 120 V, 60 Hz 277 V, 60 Hz 347 V, 60 Hz 3/4 3/4 3/4 T-6 T-6 T-6 140/60 AVH210-118 140/60 AVH210-277 140/60 AVH210-347 V 120-277 V, 50/60 Hz 3/4 T-6 140/60 ARS332-BU ➊ 347 V, 60 Hz 3/4 T-6 140/60 ARS332-347 V➊ 120-277 V, 50/60 Hz 3/4 T-6 140/60 ARS340-BU 347 V, 60 Hz 3/4 T-6 140/60 ARS340-347 V 120-277 V, 50/60 Hz 3/4 T-6 140/60 AH360-BU 347 V, 60 Hz 3/4 T-6 140/60 AH360-347 V 120-277 V, 50/60 Hz 3/4 T-6 140/60 ARS432-BU ➊ 347 V, 60 Hz 3/4 T-6 140/60 ARS432-347 V➊ 120-277 V, 50/60 Hz 3/4 T-6 140/60 ARS440-BU 347 V, 60 Hz 3/4 T-6 140/60 ARS440-347 V 120-277 V, 50/60 Hz 3/4 T-6 140/60 AH460-BU 347 V, 60 Hz 3/4 T-6 140/60 AH460-347 V 120 V, 60 Hz 277 V, 60 Hz 347 V, 60 Hz 3/4 3/4 3/4 T-6 T-6 T-6 140/60 AVH410-118 140/60 AVH410-277 140/60 AVH410-347 V Three Lamps 32 W Rapid Start T8 Bi-Pin 48” 265MA 40 W Rapid Start T12 Bi-Pin 48” 430MA 60 W Rapid Start High Output T-12 Recessed Double Contact 48” 800MA Lighting: Explosionproof — Area — Fluorescent 32 W Rapid Start T8 Bi-Pin 48” 265MA 40 W Rapid Start T12 Bi-Pin 48” 430MA 60 W Rapid Start High Output T-12 Recessed Double Contact 48” 800MA 110 W Hub Size Temperature Supply Wire (Inches) Rating °F/°C Four Lamps Rapid Start Very High Output T-12 Recessed Double Contact 48” 1500MA Protector for two-lamp fluorescent fixture Fits two lamp 48” fixtures only (ARS, AH and AVH series) UV stabilized polycarbonate. EFP248 NOTE: In paint spray areas, solvents and thinners may “cloud” the polycarbonate. Light transmission characteristics may be reduced. ➊ For Emergency Battery Pack, add suffix -EL. ➋ Fluorescent lamps are not included. Supplied with automatic resetting dual protected “Class P” ballast. For additional external fusing, add suffix -F. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1257 Lighting 32 W Rapid Start T8 Bi-Pin 48” 265MA 40 W Rapid Start T12 Bi-Pin 48” 430MA 60 W Rapid Start High Output T-12 Recessed Double Contact 48” 800MA 110 W EFU Fluorescent Factory Sealed Luminaire Ballast Data and Dimensions Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit Suitable for use in Wet Locations Catalog Number Lamps Hz Voltage Operating Amps Input Watts Starting Temperature °F/°C Lighting: Explosionproof — Area — Fluorescent 32 W Rapid Start T-8 Bi-Pin 48” 265 mA ARS232-BU 2 50/60 120-277 .52-.22 62-60 0/-18 ARS232-347 V 2 60 347 .20 59 0/-18 ARS332-BU 3 50/60 120-277 .78-.33 93-93 0/-18 ARS332-347 V 3 60 347 .30 86 0/-18 ARS432-BU 4 50/60 120-277 1.03-.43 124-120 0/-18 ARS432-347 V 4 60 347 .40 118 0/-18 50/60 120-277 .70-.35 84-42 50/10 40 W Rapid Start T-12 Bi-Pin 48” 430 mA ARS240-BU 2 ARS240-347 V 2 60 347 .30 96 50/10 ARS340-BU 3 50/60 120-277 .99-.45 114 50/10 ARS340-347 V 3 60 347 .50 140 50/10 ARS440-BU 4 50/60 120-277 1.40-.70 168-84 50/10 ARS440-347 V 4 60 347 .60 192 50/10 120-277 1.05-.55 122-86 -20/-29 60 W Rapid Start High Output T-12 Bi-Pin 48” 800 mA AH260-BU 2 50/60 AH260-347 V 2 60 347 .50 145 -20/-29 AH360-BU 3 50/60 120-277 1.54-.66 182 -20/-29 AH360-347 V 3 60 347 .90 256 -20/-29 AH460-BU 4 50/60 120-277 2.10-1.10 244-172 -20/-29 AH460-347 V 4 60 347 1.00 290 -20/-29 AVH210-118 2 60 120 2.60 300 -20/-29 AVH210-277 2 60 277 .98 250 -20/-29 AVH210-347 V 2 60 347 .90 250 -20/-29 AVH410-118 4 60 120 5.20 600 -20/-29 AVH410-277 4 60 277 1.96 500 -20/-29 AVH410-347 V 4 60 347 1.80 500 -20/-29 Dimensions in In/mm 6.00"/ 152.4 mm 6.00"/ 152.4 mm Lighting 110 W Rapid Start VHO-SHO T-12 Bi-Pin 48” 1500 mA 8.75"/ 222.3 mm 4.00"/101.6 mm No. of Lamps 1258 A B C D E 2 46-5/8/1184.4 52-7/16/1332.0 8-3/4/222.3 5-1/2/139.7 15/381.0 3 46-5/8/1184.4 52-7/16/1332.0 8-3/4/222.3 5-1/2/139.7 19-1/4/489.0 4 46-5/8/1184.4 52-7/16/1332.0 11-7/16/290.6 14/355.6 23-1/2/596.9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFU Fluorescent Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit Suitable for use in Wet Locations * Data is based on F32 TB Rapid Start Lamps. For other lamps use the following multipliers: 60 W Cool White – 1.50; and 110 W VHO – 2.19. Candlepower distribution curves and other coefficients of utilization tables are available on request. Zone Lumens Total Luminaire Efficiency = 78.6% 0-10 10-20 20-30 139.50 402.70 620.06 CIE Type - Direct 30-40 767.75 0-180 1.28 40-50 821.07 90-270 1.36 50-60 776.93 Diagonal 1.44 60-70 597.35 70-80 80-90 299.18 57.43 Zone 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Lumens Plane Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180 Lumens % Lamp % Fixture 1162.26 20.4 25.9 1930.01 33.9 43.1 3528.01 61.9 78.7 4481.97 78.6 100.0 0.00 0.0 0.0 0.00 0.0 0.0 0.00 0.0 0.0 0.00 0.0 0.0 4481.97 78.6 100.0 Total Luminaire Effieciency = 96.8% CIE Type - Direct 249.94 726.14 1122.12 30-40 1392.92 0-180 1.26 40-50 1496.9 90-270 1.38 50-60 1397.8 Diagonal 1.46 60-70 1087.36 70-80 80-90 557.01 103.54 Lumens Spacing Criteria Plane Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180 Lumens % Lamp % Fixture 2098.20 25.0 25.8 3491.12 41.6 42.9 6385.81 76.0 78.5 8133.73 96.8 100.0 0.00 0.0 0.0 0.00 0.0 0.0 0.00 0.0 0.0 0.00 0.0 0.0 8133.73 96.8 100.0 Total Luminaire Effieciency = 70.9% CIE Type - Direct 237.58 692.75 1081.02 30-40 1352.75 0-180 1.28 40-50 1467.39 90-270 1.42 50-60 1408.53 Diagonal 1.48 60-70 1130.45 70-80 80-90 598.78 117.42 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Spacing Criteria Plane 1 2 3 4 5 6 7 8 9 10 Zone 0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180 Lumens % Lamp % Fixture 2011.34 17.6 24.9 3364.10 29.5 41.6 6240.02 54.7 77.2 8086.66 70.9 100.0 0.00 0.0 0.0 0.00 0.0 0.0 0.00 0.0 0.0 0.00 0.0 0.0 8086.66 70.9 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 86 78 71 65 59 55 51 47 44 41 82 71 62 55 49 44 40 36 33 31 78 66 56 48 42 37 33 29 27 24 75 61 51 43 36 32 28 25 22 20 83 76 69 63 58 53 49 46 43 40 80 70 61 54 48 43 39 36 33 30 77 65 55 47 41 36 32 29 26 24 74 60 50 42 36 32 28 25 22 20 77 67 59 52 46 42 38 35 32 29 74 63 53 46 40 36 32 29 26 24 72 59 49 42 36 31 28 24 22 20 74 64 56 50 45 40 37 34 31 29 72 61 52 45 40 35 31 28 26 23 70 58 48 41 35 31 27 24 22 20 71 62 54 48 43 39 36 33 30 28 69 59 51 44 39 34 31 28 25 23 68 56 47 41 35 31 27 24 22 20 66 55 46 39 33 29 25 23 20 18 REPORT NUMBER: ARS332 Lamps: Three 32 W Explosionproof Fluorescent with Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 115 115 115 115 113 113 113 113 108 108 108 103 103 103 99 99 99 97 1 2 3 4 5 6 7 8 9 10 105 101 96 87 87 77 79 68 73 60 67 54 62 49 58 44 54 41 50 38 97 81 69 59 51 45 40 36 33 30 93 75 62 52 45 39 34 30 27 25 103 93 84 77 71 65 60 56 53 49 99 86 75 66 59 53 49 44 40 37 95 80 68 58 51 45 40 36 32 30 91 74 62 52 45 39 34 30 27 25 94 82 72 64 57 51 47 42 39 36 91 77 66 57 50 44 39 35 32 29 88 73 60 51 44 38 34 30 27 24 91 79 69 62 55 50 45 41 38 35 88 75 64 55 49 43 38 35 31 29 86 71 59 50 44 38 34 30 27 24 87 76 67 59 53 48 44 40 37 34 85 72 62 54 48 42 38 34 31 28 83 69 58 50 43 38 33 30 27 24 81 67 56 48 41 36 31 28 25 22 REPORT NUMBER: ARS432 Lamps: Four 32 W Explosionproof Fluorescent with Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Rw Zonal Lumen Summary 80 0 94 94 94 94 91 91 91 91 87 87 87 84 84 84 80 80 80 79 % Walls Rw 0-10 10-20 20-30 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc 80 70 50 30 10 0 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 84 84 84 84 82 82 82 82 79 79 79 75 75 75 72 72 72 71 1 77 74 70 68 75 72 69 67 69 67 64 66 64 62 64 62 61 59 2 3 4 5 6 7 8 9 10 70 63 58 53 49 45 42 39 37 64 56 49 44 39 35 32 29 27 59 50 43 37 33 29 26 23 21 55 45 38 32 28 24 22 19 18 68 62 56 51 47 44 41 38 36 62 54 48 43 38 35 32 29 27 58 49 42 37 32 29 26 23 21 54 44 37 32 28 24 22 19 17 60 52 46 41 37 34 31 28 26 56 48 41 36 32 28 25 23 21 53 44 37 32 27 24 21 19 17 57 50 45 40 36 33 30 27 25 54 46 40 35 31 28 25 23 21 51 43 36 31 27 24 21 19 17 55 48 43 38 35 32 29 27 25 53 45 39 34 30 27 24 22 20 50 42 36 31 27 24 21 19 17 49 41 34 29 25 22 20 18 16 1259 Lighting Zone 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Coefficients of Utilization - Zonal Cavity Method % Walls Rw 0-10 10-20 20-30 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 REPORT NUMBER: ARS232 Lamps: Two 32 W Explosionproof Fluorescent with Reflector * Lighting: Explosionproof — Area — Fluorescent 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 Spacing Criteria PAPL Portable Two and Four Lamp Fluorescent Factory Sealed Luminaire Explosionproof, Dust-Ignitionproof 120 V. Suitable for Wet Locations and Paint Spray Booths. UL Listed for Horizontal use only. Class I, Division 1 and 2, Groups C, D Applications • Classified areas where ignitable gases and vapors, dusts, paint residue, paint powder, or corrosive atmospheres may be present, or where excessive moisture is a problem. • Approved for using directly inside a paint-spray booth. Complies with NEC 516-3(c) and NFPA No. 33. • Typical applications include aircraft manufacturing and maintenance facilities, refineries, chemical and petrochemical plants, textile mills, grain elevators and other grain-processing facilities, pharmaceutical plants, paint-spray areas, and where the permanent mounting of a fixture is not practical. • UL approved for horizontal use only. Lighting Lighting: Explosionproof — Area — Fluorescent Features • Factory sealed fixture. No external seals needed for classified areas. • Compact size. Uses two or four single-ended biaxial 40 W fluorescent lamps in a portable fixture. (2 lamp cart overall length is 38-1/2”/978 mm, 4 lamp cart overall length is 62”). • Gasketed end caps remove easily for wiring and relamping. • Teflon-coated stainless steel wire guard supplied standard. • Adjustable aluminum mounting frame allows fixtures to pivot at 45° increments in a 180° horizontal plane. • 50’ of 16-3 SOW cord with nonmetallic explosionproof plug prewired for 120 V. • Static discharge wheels. • Explosionproof, heat-resistant and impact-resistant glass tubes help protect the lamp. • Cool-operating fluorescent lamps provide excellent color rendition and high lumen output per watt. Average lamp life is 20,000 hours. • Corrosion resistant. • Reflectors (optional) are designed for efficient distribution. Easily installed using only a screwdriver. • Energy-saving Class P ballasts, with automatic thermally activated protective device. • Fixture uses Appleton’s ECP1523 Plug, which is UL Classified for use with Killark® UGR and Crouse-Hinds® ENR series receptacles, as well as Appleton’s U-Line receptacles. 4-Lamp Luminaire 2-Lamp Luminaire Standard Materials • End housing, cord grip and elbow: copperfree (4/10 of 1% max.) aluminum • Housing hood, frame and optional reflectors: heavy gauge aluminum • Wheels: static discharge rubber • Guard: Teflon coated stainless steel • Plug: aluminum Standard Finishes • End housings and hood: two-coat baked gray epoxy finish • Reflector: white baked powder coat polyester • Frame assembly: natural aluminum Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E59147 CSA Standard: C22.2 No. 12, C22.2 No. 137 cUL Listed: E59147 1260 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PAPL Portable Two and Four Lamp Fluorescent Factory Sealed Luminaire Explosionproof, Dust-Ignitionproof 120 V. Suitable for Wet Locations and Paint Spray Booths. UL Listed for Horizontal use only. Class I, Division 1 and 2, Groups C, D Lamps Included Volts Temperature Rating Catalog Number T6 PAPL240-120 Two-Lamp Luminaires Less Reflector (2) 40 W F40BX 120 Reflector Only Aluminum reflector with white powder coat polyester finish APL2R (4) 40 W F40BX Two-Lamp Luminaire Illustrated 120 T6 PAPL440-120 Reflector Only Aluminum reflector with white powder coat polyester finish APL4R Dimensions in Inches/Millimeters 18.00"/ 457.2 mm 13.88"/ 352.6 mm Lighting: Explosionproof — Area — Fluorescent Four-Lamp Luminaires Less Reflector 8.50"/ 215.9 mm 5.00"/ 127.0 mm Dia. Lighting 14.00"/ 355.6 mm 18.00"/ 457.2 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 62.00"/1574.8 mm 4 Lamp 38.50"/977.9 mm 2 Lamp 1261 FD Series Cylindrical Fluorescent Luminaires Standard and Emergency Battery Back-Up – Flameproof Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/68 Applications • Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. • For use in locations where a high degree of corrosion resistance is required. • For indoor/outdoor use where protection against dirt, water and moisture is necessary. • Typical applications include oil refineries, petrochemical facilities, pulp and paper, mills, painting, sewage and water treatment facilities, warehouses, underground tunnels and general manufacturing facilities. 2 x 58 W Lighting: Explosionproof — Area — Fluorescent Features • Impact resistant borosilicate glass sealed tube. • Easy access to lamps through gray painted Zamak threaded entry cap. • Supplied with O-ring for improved ingress protection. • Corrosion-resistant gray painted Zamak. • Supplied with energy efficient and self induction ferromagnetic ballast on a removable gear tray. • Quick and easy installation of fluorescent lighting fixtures with 2G11 and G13 lamp holders. • Supplied with external and internal ground/earth connection. • Fixture supplied with one M20 blanking plug. • Easy connection to wire and disconnect with plug-in terminal blocks. • Bi-pin (G13) 18 & 36 W magnetic ballast versions operate at 158°F/70°C ambient temperature with T4 rating. • Magnetic ballast versions 230 V 50 Hz or 240 V 50 Hz or 220 V 60 Hz or 230 V 60 Hz. • Electronic ballast versions 110 to 254 Vac/Vdc 50/60 Hz. • 3 hour emergency version with automatic self test every month • Plug in battery pack (6 V 4 Ah) is easy to remove for maintenance. Lighting Standard Materials • • • • • End caps and cover: gray painted Zamak Glass tube: borosilicate O-ring gasket: Nitrile (NBR) Internal reflector: white powder coated galvanized steel Mounting accessories: several accessories in different material such as zinc plated steel, galvanized steel or 316 stainless steel Options • 3 lamp versions. • 8 W fluorescent (Bi-pin G5) available, see section HBDC series. 1262 2 x 36 W 2 x 18 W Certifications and Compliances • • • • • • • • • • • • • • • Certification Type: FLd Zone 1 and 2 — Conforming to ATEX 94/9/CE: CE 0081 II 2 G — ATEX/IEC Protection: Ex d IIB, Ex d IIB+H2, Ex d IIC — T Rating: (See table) Zone 21 and 22 II 2 D — Conforming to ATEX 94/9/CE: CE — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: (See table) Ambient Temperature: -4°F to 131°F / -20°C to 55°C CE Declaration of Conformity: 50203 ATEX Certificate: LCIE 97 ATEX 6012 IECEx Certificate: IECEx LCI 04.0018 Other Certifications: GOST Index of Protection (solid & liquid): IP66/68 Impact Resistance (shock): IK08 Internal Volume: > 122.05in3/2 dm3 (2 liters) Ex Standards: EN / IEC 60079-0; 60079-1; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1; 60598-2-22 EMC Standards: EN / IEC 55015; 61547 Other Standards: EN / IEC 60529 (IP); 62262 (IK) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FD Series Cylindrical Fluorescent Luminaires Standard and Emergency Battery Back-Up – Flameproof Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/68 Ordering Information Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide For Fd Non-Metallic Fluorescent Lighting Fixtures FD B Series: FD - FD Series Zone 1 & 2 - 21 & 22 ATEX / IEC certified 1 18 Number of Lamps: 1 - Single 2 - Double 3 - Three Lamps BK A P Options: (Options must be listed alphabetically) E - 3h Emergency (combined) – Battery 6 V 4 Ah Emergency versions: BU - 110 to 254 Vac/Vdc 50/60 Hz Lamp Type: B - Bi-pin (G13) Fluorescent C - Compact Fluorescent (2G11) F - Bi-pin (G5) Fluorescent Cable Entry: M - Metric M20 N - NPT 3/4" Wattage: 18 - 18 Watt 36 - 36 Watt 58 - 58 Watt T Rating (Gas) and Surface Temperature (Dust) Table Model 0.3 1.2 1.5 Dust – Surface Temperature Without External Reflector With External Reflector Compact Fluorescent 2G11 18 W max. T6 T5 N.A. T5 T4 203 °F/95 °C 266 °F/130 °C a) Fluorescent G13 Magnetic Ballast 1 x 18 W / 2 x 18 W T6 T5 T4 T6 T5 207 °F/97 °C 203 °F/95 °C b) Fluorescent G13 Electronic Ballast 1 x 18 W / 2 x 18 W / 3 x 18 W T6 T6 N.A. T6 T5 172 °F/78 °C 203 °F/95 °C c) Compact Fluorescent 2G11 1 x 36 W 2 x 36 W T6 T5 N.A. T6 T5 T4 203 °F/95 °C 266 °F/130 °C a) Fluorescent G13 Magnetic Ballast 1 x 36 W / 2 x 36 W / 3 x 36 W T6 T5 T4 T6 T5 230 °F/110 °C 203 °F/95 °C b) Fluorescent G13 Electronic Ballast 1 x 36 W / 2 x 36 W / 3 x 36 W T6 T6 N.A. T6 T6 172 °F/78 °C 176 °F/80 °C a) Fluorescent G13 Magnetic Ballast 1 x 58 W / 2 x 58 W T6 T6 N.A. T6 T5 176 °F/80 °C 203 °F/95 °C b) Fluorescent G13 Electronic Ballast 1 x 58 W / 2 x 58 W / 3 x 58 W T6 T5 N.A. T6 T5 183 °F/84 °C 203 °F/95 °C Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1263 Lighting 0.6 Lamp Type Gas – T Rating Without External Reflector With External Reflector Ta = Ta = Ta = Ta = Ta = 104° F/40° C 131 °F/55 °C 158 °F/70 °C 104 °F/40 °C 131 °F/55 °C Lighting: Explosionproof — Area — Fluorescent Voltage (50/60 Hz): Standard versions: AA - 220 Vac 60 Hz AC - 230 Vac 60 Hz XC - 230 Vac 50 Hz X3 - 240 Vac 50 Hz BU - 110 to 254 Vac/Vdc 50/60 Hz FD Series Cylindrical Fluorescent Luminaires Standard and Emergency Battery Back-Up – Flameproof Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/68 Ordering Information – Standard Versions Two M20 threaded entries, supplied with one M20 aluminum blanking plug. Connection via 1 x 3 double deck terminals. Capacity (flexible/solid): 0.001 in2 to 0.004 in2 / 0.75 mm2 to 2.5 mm2. L For Bi-pin (G13) Fluorescent Lamps - T8 (1.02"/26 mm) or T12 (1.50"/38 mm) 230 V - 50 Hz – Magnetic Ballast – Starter Ignition Compensated power supply – power factor > 0.9 L Lighting: Explosionproof — Area — Fluorescent No. of Lamps Power (W) Gas Group Model L N N N Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 1 18 IIC 0.6 19.8/9 3539.38/58 1 FDB118XCM 2 18 IIC 0.6 21.38/9.7 3539.38/58 1 FDB218XCM 1 36 IIB+H2 1.2 32.41/14.7 6041.35/99 1 FDB136XCM 2 36 IIB+H2 1.2 33.73/15.3 6041.35/99 1 FDB236XCM 1 58 IIB 1.5 37.48/17 7261.83/119 1 FDB158XCM 2 58 IIB 1.5 40.12/18.2 7261.83/119 1 FDB258XCM 240 V - 50 Hz – Magnetic Ballast – Starter Ignition Compensated power supply – power factor > 0.9 1 18 IIC 0.6 19.8/9 3539.38/58 1 FDB118X3M 2 18 IIC 0.6 21.38/9.7 3539.38/58 1 FDB218X3M 1 36 IIB+H2 1.2 32.41/14.7 6041.35/99 1 FDB136X3M 2 36 IIB+H2 1.2 33.73/15.3 6041.35/99 1 FDB236X3M 1 58 IIB 1.5 37.48/17 7261.83/119 1 FDB158X3M 2 58 IIB 1.5 40.12/18.2 7261.83/119 1 FDB258X3M 3539.38/58 1 FDB218AAM 220 V - 60 Hz – Magnetic Ballast – Starter Ignition Lighting Compensated power supply – power factor > 0.9 2 18 IIC 0.6 21.38/9.7 2 36 IIB+H2 1.2 33.73/15.3 6041.35/99 1 FDB236AAM 2 58 IIB 1.5 40.12/18.2 7261.83/119 1 FDB258AAM 230 V - 60 Hz – Magnetic Ballast – Starter Ignition Compensated power supply – power factor > 0.9 1264 2 18 IIC 0.6 21.38/9.7 3539.38/58 1 FDB218ACM 2 36 IIB+H2 1.2 33.73/15.3 6041.35/99 1 FDB236ACM 2 58 IIB 1.5 40.12/18.2 7261.83/119 1 FDB258ACM Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FD Series Cylindrical Fluorescent Luminaires Standard and Emergency Battery Back-Up – Flameproof Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/68 Ordering Information – Standard Versions – Continued L For Bi-pin (G13) Fluorescent Lamps - T8 (1.02"/26 mm) or T12 (1.50"/38 mm) 110 to 254 Vac/Vdc 50/60 Hz – Electronic Ballast Power factor > 0.95 L L N N N Power (W) Gas Group Model Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 2 18 IIC 0.6 21.38/9.7 3539.38/58 1 FDB218BUM 2 36 IIB 1.2 33.73/15.3 6041.35/99 1 FDB236BUM 3 36 IIB 1.2 35.94/16.3 6041.35/99 1 FDB336BUM 1 58 IIB 1.5 37.48/17 7261.83/119 1 FDB158BUM 2 58 IIB 1.5 40.12/18.2 7261.83/119 1 FDB258BUM 3 58 IIB 1.5 42.33/19.2 7261.83/119 1 FDB358BUM For 2G11 Compact Fluorescent Lamps – TC-L 230 V - 50 Hz – Magnetic Ballast – Starter Ignition Compensated power supply – power factor > 0.9 – Lamps supplied 1 18 IIC 0.3 19.8/9 3539.38/58 1 FDC118XCM 2 18 IIC 0.3 21.38/9.7 3539.38/58 1 FDC218XCM 1 36 IIB+H2 0.6 32.41/14.7 6041.35/99 1 FDC136XCM 2 36 IIB+H2 0.6 33.73/15.3 6041.35/99 1 FDC236XCM Emergency Versions Two M20 threaded entries, supplied with one M20 aluminum blanking plug. Connection via 1 x 4 double deck terminals. Capacity (flexible/solid): 0.001 in2 to 0.004 in2 / 0.75 mm2 to 2.5 mm2. Lighting For Bi-pin (G13) Fluorescent Lamps – T8 (1.02"/26 mm) or T12 (1.50"/38 mm) 110 to 254 Vac/Vdc 50/60 Hz – Electronic Ballast 3 hour duration - battery pack 6 V 4 Ah - Power factor > 0.95 - Self test every month. No. of Lamps Power (W) Gas Group Model Line Output Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 2 18 IIC 0.6 29% 25.57/11.6 3539.38/58 1 FDB218BUME 2 36 IIB 1.2 16% 37.92/17.2 6041.35/99 1 FDB236BUME 2 58 IIB 1.5 11% 44.53/20.2 7261.83/119 1 FDB258BUME Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Area — Fluorescent No. of Lamps 1265 FD Series Cylindrical Fluorescent Luminaires Standard and Emergency Battery Back-Up – Flameproof Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/68 Description Pack Catalog Number 1 FDER1G External Reflector – White Painted Galvanized Steel Model 0.3 Model 0.6 1 FDER2G Model 1.2 1 FDER3G Model 1.5 1 FDER4G 1 FDPG1Z Protective Guard – Zinc Plated Steel Lighting: Explosionproof — Area — Fluorescent Model 0.3 Model 0.6 1 FDPG2Z Model 1.2 1 FDPG3Z Model 1.5 1 FDPG4Z Zinc plated steel 1 FDFBZ 316 stainless steel 1 FDFBS Zinc plated steel 1 FDSBZ 316 stainless steel 1 FDSBS Zinc plated steel 1 FDHC49Z 316 stainless steel 1 FDHC49S Fixing Brackets for Ease of Surface Installation – Set of Two Surface Mounting Brackets – Set of Two Half Clamp Brackets for Pole Mounting – Set of Two Dia. 1.65 to 1.93" / 42 to 49 mm pole (1.25 to 1.5" / 31.8 to 38.1 mm tube) Lighting Dia. 2.36"/60 mm pole (2"/50.8mm tube) Zinc plated steel 1 FDHC60Z 316 stainless steel 1 FDHC60S 1.20 M stainless steel chain 1 FDSCS Fall Prevention Kit 1266 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FD Series Cylindrical Fluorescent Luminaire Technical Data Standard and Emergency Battery Back-Up – Flameproof Zone 1 & 2 – 21 & 22 II 2 GD ATEX / IECEx IP66/68 Wiring Diagram Emergency Function Diagram Two Lamp Version Mains PE N L Mains Lighting Switch Lighting Switch ON Lighting Switch OFF ON L1 Standard Fluorescent Lighting Fixture L1 L N PE Emergency Fluorescent Lighting Fixture OFF Lighting: Explosionproof — Area — Fluorescent L N PE LED Status Color Indication Blinking 1:1 Green Red ON Mains good, battery trickle charging Blinking 1:1 No battery connected or something is defective Flashing 1:1 Mains faulty, battery empty or lamp defective ON Mains faulty, output ON OFF No mains, battery completely empty Blinking 1:1 Mains good, performing self test ON Result of self test was not good Lighting Yellow Function Mains good, battery quick charging Dimensions (in/mm) 0.47”/ 12.0 mm 0.59”/ 15.0 mm 3.05”/ 77.5mm Model A B 0.3 16.93" / 430 mm 13.19" / 335 mm 0.6 29.33" / 745 mm 25.59" / 650 mm 1.2 53.74" / 1365 mm 49.61" / 1260 mm 1.5 65.16" / 1655 mm 61.42" / 1560 mm 3.50”/ 3.35”/ 89.0 mm 85.0 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1267 FD Series Cylindrical Fluorescent Luminaire Photometric Data Standard and Emergency Battery Back-Up – Flameproof Photometric Data Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 Longitudinal Transverse Bi-pin (G13) Fluorescent 1 x 18 W Efficiency 75.3% NF C 71-121/0: 0.69 H + 0.06 T Lighting Lighting: Explosionproof — Area — Fluorescent Candela Distribution 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 150° 120° 167 167 Degrees 166 167 164 168 160 168 154 168 147 168 139 167 129 166 118 164 151 162 106 160 77 157 61 152 45 144 0° 15° 28 135 105° 90° 75° 60° 45° 30° 105° 90° 75° 60° 45° 30° 1 x 58 W Efficiency 74.5% NF C 71-121/0: 0.70 H + 0.05 T 0-180 90-270 167 167 150° 120° 167 167 Degrees 164 167 160 167 154 167 147 166 139 165 130 164 119 163 106 161 93 158 78 155 63 149 0° 15° 47 142 31 132 1268 0-180 90-270 150° 120° 161 161 Degrees 160 162 157 163 153 164 148 164 141 164 133 164 123 163 112 130 100 153 86 147 73 141 58 134 41 121 0° 15° 26 106 105° 90° 75° 60° 45° 30° Candela Distribution 0-180 90-270 150° 120° 0 149 149 Degrees 5 148 149 10 146 150 15 142 150 20 137 150 25 131 149 30 124 148 35 114 146 40 104 144 45 93 138 50 81 131 55 68 125 60 54 117 65 40 105 0° 15° 70 26 91 105° 90° 75° 60° 45° 30° Candela Distribution 0-180 90-270 0 148 148 150° 120° 5 147 149 Degrees 10 145 148 15 142 149 20 137 150 25 131 149 30 124 148 35 115 146 40 105 144 45 94 140 50 82 134 55 69 128 60 55 119 0° 15° 65 42 108 70 28 95 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Candela Distribution 0-180 90-270 165° 135° 120° 141 141 Degrees 105° 141 141 141 139 90° 140 135 75° 139 130 138 124 60° 136 117 133 109 45° 128 100 121 89 113 77 105 65 30° 96 51 15° 87 38 0° 78 25 3 x 36 W Efficiency 53.3% NF C 71-121: 0.47 G + 0.06 T 105° 90° 75° 60° 45° 30° 2 x 36 W Efficiency 61.5% NF C 71-121: 0.57 G + 0.04 T Candela Distribution 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 2 x 18 W Efficiency 56.2% NF C 71-121: 0.52 G + 0.04 T Candela Distribution 2 x 36 W Efficiency 61.5% NF C 71-121: 0.57 G + 0.04 T Candela Distribution 0-180 90-270 150° 120° 164 164 Degrees 163 164 161 165 157 165 151 165 145 165 137 165 127 164 116 162 104 160 91 158 76 154 61 149 45 140 0° 15° 30 131 3 x 18 W Efficiency 57% NF C 71-121: 0.50 G + 0.07 T Candela Distribution 1 x 36 W Efficiency 74.3% NF C 71-121/0: 0.69 H + 0.05 T 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 2G11 Compact Fluorescent 2 x 18 W Efficiency 68.1% NF C 71-121: 0.63 G + 0.06 T 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 150° 120° 154 154 Degrees 153 154 151 154 147 153 142 153 136 152 128 150 119 147 108 142 95 143 81 127 66 113 49 101 32 88 0° 15° 17 75 105° 90° 75° 60° 45° 30° 2 x 36 W Efficiency 53.6% NF C 71-121: 0.50 G + 0.04 T Candela Distribution 0-180 90-270 165° 135° 120° 0 132 132 Degrees 105° 5 132 131 10 132 129 90° 15 131 126 75° 20 131 122 25 131 116 60° 30 128 110 35 125 102 45° 40 120 93 45 114 83 50 107 72 55 99 61 30° 60 91 49 15° 65 82 36 0° 70 74 24 Candela Distribution 0-180 90-270 150° 120° 0 140 140 Degrees 5 139 141 10 137 141 15 134 142 20 129 141 25 124 140 30 117 139 35 109 137 40 99 132 45 89 125 50 77 117 55 65 108 60 52 97 65 38 87 0° 15° 70 24 75 105° 90° 75° 60° 45° 30° 3 x 36 W Efficiency 53.3% NF C 71-121: 0.47 G + 0.06 T 105° 90° 75° 60° 45° 30° Candela Distribution 0-180 90-270 0 125 125 165° 135° 120° 5 125 125 Degrees 10 125 124 15 124 122 20 123 119 25 121 114 30 118 108 35 115 101 40 109 92 45 103 82 50 96 72 55 89 60 60 81 48 0° 15° 65 73 36 70 65 24 105° 90° 75° 60° 45° 30° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. NEC: Class I, Division 1, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X CEC: V Class I, Division 1 and 2, Groups B, C, D. T3B Class I, Zone 1 and 2, Groups IIB, IIA Exd IIB + H2, Zone 1 Class II, Division 1 and 2, Groups E, F, G. T3B Class III Type 3R, 4X Applications • Code•Master Incandescent Explosionproof fixtures are designed to provide safe operation in the presence of hazardous gases, vapors, or dusts, defined by the National Electrical Code as Class I, Groups C and D; Class I, Zone 1, Group IIB; and Class II, Groups E, F and G. • For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. • For use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners, in refineries, and in other areas where ignitable vapors, dust, moisture and corrosive elements may be present. • Suitable for outdoor saltwater locations and for other wet locations. Features Standard Materials • Fixture housing, mounting hoods and guards: copperfree (4/10 of 1% max.) aluminum • Globes: prismatic glass • Reflectors: fiberglass reinforced polyester Standard Finishes • Fixture housing, guards and mounting hoods: epoxy power coat finish, electrostatically applied for complete, uniform corrosion protection Options • Add suffix -Z for Exd IIB + H2, Zone 1 V. Certifications and Compliances • UL Standard: UL 1598, UL 1598A, UL 844 • UL Listed: E10444 Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Area — Incandescent • Fixtures operate safely in high ambient temperatures. • Patented “wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. The only wiring required is attaching two wires to connection block in mounting hood. • Connection block is easily wired: (a) loosen two screws; (b) make wire connections; and (c) re-position connection block. • Safe, easy servicing without disconnecting any wiring. “Wireless” fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a “stand-by” unit. • Acme double-lead threads speed installation and fixture removal from mounting hood – only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating problems often encountered with single-lead threads during fixture unit removal. • Strategic location of lamp socket, in combination with interior prism design of the glass globe, provides optimum light distribution and control. • Heat- and impact-resistant globes have smooth dust-resistant exterior. • Superior corrosion resistance, with epoxy powder coat finish. • Porcelain socket with nickel-plated phosphor bronze screw shell. Assures long trouble-free operation in high ambient areas. • Choice of mountings: pendant, ceiling, bracket and stanchion. • Fiberglass-reinforced polyester reflectors, in standard dome or 30° angle styles, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. • All threaded joints are flame-tight. • Heat- and impact-resistant globes have smooth dust-resistant exterior. • Superior corrosion resistance, with epoxy powder coat finish. • Optional guards protect globes from damage. Secured to fixture with three stainless steel screws. • Medium base lamp socket. • Maximum voltage 300 Vac 60 Hz. 1269 Code•Master™ Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. NEC: Class I, Division 1, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X Class III Type 3R, 4X CEC: V Class I, Division 1 and 2, Groups B, C, D. T3B Class I, Zone 1 and 2, Groups IIB, IIA Exd IIB + H2, Zone 1 Class II, Division 1 and 2, Groups E, F, G. T3B Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide CI P 30 Series: CI – Code•Master Incandescent 75 Wattage: 30 – 100 W A21 200 W A23 300 W PS25 Options: G – Guard Blank – No Guard Z - Exd IIB + H2, Zone 1 V Lighting: Explosionproof — Area — Incandescent Mounting Hood: P – Pendant B – Wall Bracket C – Ceiling S – Stanchion Lighting G Hub Size: 75 – 3/4” 100 – 1” 150 – 1-1/4” or 1-1/2” Technical Data Thermal Suitability of Code•Master Incandescent Fixture. Lamp Type Lamp Watts (Max.) Use Wire Supply °F/°C Ambient Temperature °F/°C Incandescent (A21) 100 167/75 104/40 T5 T3C Incandescent (A23) 200 167/75 104/40 T4 T3C Incandescent (PS25) 300 167/75 104/40 T3C T3C Class I, Division 1, Groups C & D Class II, Division 1, Groups E, F & G “T” Numbers Represent the Maximum External Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3 T4 T4A T5 T6 Temp Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code.. V CSA Certification only. 1270 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. NEC: Class I, Division 1, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X CEC: V Class I, Division 1 and 2, Groups B, C, D. T3B Class I, Zone 1 and 2, Groups IIB, IIA Exd IIB + H2, Zone 1 Class II, Division 1 and 2, Groups E, F, G. T3B Class III Type Mounting Type 3R, 4X Hub Size (Inches) Catalog Number ➌ Pendant CIP3075 3/4 One Hub Rigid Conduit. CIP30100 ➋ 1 Ceiling Four Hubs Three Close-Up Plugs Rigid Conduit CIC3075 3/4 CIC30100 ➋ 1 Wall Bracket Four Hubs Three Close-Up Plugs Rigid Conduit CIB3075 3/4 1 CIB30100 ➋ One Hub 1-1/2 ♦ CIS30150 Mounting Hoods Type Mounting Hub Size (Inches) Hood Weight (Lbs.) Catalog Number Pendant 3/4 2/.9 CAP75 1 2/.9 CAP100 ➋ Four Hubs Three Close-Up Plugs Rigid Conduit 3/4 4/1.8 CAC75 1 4/1.8 CAC100 ➋ Four Hubs Three Close-Up Plugs Rigid Conduit 3/4 6/2.7 CALB75 1 6/2.7 CALB100 ➋ 1-1/4 or 1-1/2 ➊ 2/.9 CAS-150 ➊ One Hub Rigid Conduit Ceiling Lighting: Explosionproof — Area — Incandescent 25° Stanchion Bracket One Hub ➊ 1-1/2” Tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➋ 1” Hubs are listed for Group D only. ➌ Catalog numbers shown are supplied with clear lens. Add suffix G for optional Guard. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1271 Lighting 25° Stanchion Code•Master™ Incandescent Factory Sealed Luminaire Fixture Units and Accessories Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. NEC: Class I, Division 1, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X CEC: V Class I, Division 1 and 2, Groups B, C, D. T3B Class I, Zone 1 and 2, Groups IIB, IIA Exd IIB + H2, Zone 1 Class II, Division 1 and 2, Groups E, F, G. T3B Class III Description Weight lbs/kg Type 3R, 4X Catalog Number Fixture Unit Only Not including mounting hood 11/5 CJNC30I Optional White Polyester Reflector Standard Dome 2.5/1.1 KR2-ST Angled Reflector 2.5/1.1 KR2-AN 0.5/.2 CJGU-15 7.5/3.4 CJEXRN 0.5/.2 VPT-7 Optional White Polyester Reflector Optional Three Way Exit Sign Replacement Connection Block Lighting Lighting: Explosionproof — Area — Incandescent Optional Aluminum Guard 1272 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ Incandescent Factory Sealed Luminaire Family Tree and Dimensions Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. NEC: Class I, Division 1, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X Type 3R, 4X CEC: V Class I, Division 1 and 2, Groups B, C, D. T3B Class I, Zone 1 and 2, Groups IIB, IIA Exd IIB + H2, Zone 1 Class II, Division 1 and 2, Groups E, F, G. T3B Class III Ceiling Four Hubs Three Close-Up Plugs 3/4” NPT CAC75 Pendant One Hub 3/4” NPT CAP75 Bracket Four Hubs Three Close-Up Plugs 3/4” NPT CALB75 25° Stanchion One Hub 1-1/4 or 1-1/2” NPT CAS150 Code•Master Incandescent Fixture Unit CJNC30I Standard Dome KR2-ST Angle Reflector KR2-AN Optional Three Way Exit Sign CJEXRN Dimensions in Inches/Millimeters Hub for .75" NPT Conduit Pendant 13.88"/ 352.6 mm 4.50"/ 114.3 mm Wall Bracket 3.75"/ 95.3 mm 4.92"/ 125.0 mm 12.38"/ 314.5 mm Hub For 0.41"/ 10.4 mm Dia. 13.15"/ 334.0 mm 3/4” NPT 2.46"/ 62.5 mm 2.28"/ 57.9 mm 2” Wiring access 13.53"/ 343.7 mm 3.92"/ 99.6 mm 13.75"/ 349.3 mm cover both sides. 4.25"/ 108.0 mm 4.92"/ 125.0 mm Sq. 1.23"/ 31.2 mm 3.46"/ 87.9 mm 1.79"/ 45.5 mm 11.5"/ 292.1 mm 7.80"/ 198.1 mm 13.75"/ 349.3 mm Ceiling 25° Stanchion 5.95"/ 151.3 mm 7.80"/ 198.1 mm 4.00"/ 101.6 mm 4.00"/ 101.6 mm 4.00"/ 101.6 mm 25˚ Hub for .75" NPT Conduit Four Sides Lighting 13.38"/ 339.9 mm 11.93"/ 303.0 mm 13.00"/ 330.2 mm 12.87"/ 326.9 mm 4.50"/ 114.3 mm Dia. 5.92"/ 150.4 mm 7.80"/ 198.1 mm 11.43"/ 290.3 mm 12.48"/ 317.0 mm V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Area — Incandescent Optional Aluminum Guard CJGU-15 1273 A-51® Incandescent Factory Sealed Luminaires Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. For Group A and B Class I, Division 1 and 2, Groups A , B, C, D Class II, Division 1 and 2, Groups E, F, G Class III For Group C and D Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G* Class III Applications Group A and B • A-51 Series Incandescent Class I, Groups A, B, C and D; and Class II, Groups E, F and G applications (see listings and area suitability chart). • Ideal for use in chemical and petrochemical plants, and in other heavy process areas where ignitable vapors, dust, moisture and corrosive atmospheres may be present. • Suitable for use in wet locations. • Wide range of wattages – 60 W through 500 W incandescent lamps. • Choice of units with or without guard, as well as choice of porcelain, polyester or aluminum reflectors. • Choice of mountings: pendant, ceiling, 25° stanchion, long bracket and 15° short bracket. • Porcelain reflectors for standard applications and fiberglass reinforced polyester reflectors for installations where fixture is subject to exceptionally severe corrosive atmospheres. High bay reflector for installations where mounting height from work plane ranges from 20 to 30 feet/508" to 762 mm. • Class I, Groups A and B fixtures have special UL-approved sintered metal flame arrester. Polyester Reflector Porcelain Reflector Group C and D Lighting Lighting: Explosionproof — Area — Incandescent Features • All A-51 fixtures are factory-sealed; no external sealing fittings required. • New high temperature phenolic connection block in mounting hood has rugged leaf spring contacts – loosen two screws, rotate and remove for quick wiring. • Safe, easy servicing or relamping without disconnecting any wiring. “Wireless” fixture unit easily threads off mounting hood for convenient servicing or for immediate exchange with “standby” unit. • All joints are flame-tight. • Specially formulated two-coat baked epoxy enamel provides superior protective finish to resist corrosion. Applied to all mounting hoods, fixture units and guards. • New high temperature glass-reinforced phenolic socket block in fixture unit has collector ring and pin that automatically make electrical contact as fixture unit is threaded onto mounting hood. • Globes in A-51 fixtures are explosionproof and heat- and impact-resistant glass. Prismatic configuration on globe interior provides light control while allowing smooth exterior surface for cleaning. • A-51 fixture units have standardized threads to fit all A-51 and mounting hoods. • All fixtures have aluminum inner reflector for increased lumen efficiency. • A-51 fixture guards to protect globe are of rugged copperfree aluminum construction and double epoxy coated. Easily mount to globe ring with 3 screws. Polyester Reflector Porcelain Reflector Standard Finishes • Fixtures, guards and mounting hoods: two-coat epoxy-clad finish. Epoxy powder coat finish, electrostatically applied for complete, uniform surface protection. • Steel reflectors: white porcelain enamel. • Polyester and aluminum reflectors: natural finish. Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 Standard Materials • Fixtures and guards: copperfree (4/10 of 1% max.) aluminum. • Pendant mounting hoods: copperfree (4/10 of 1% max.) aluminum. • Ceiling and bracket mounting hoods: malleable iron with aluminum adapters. • Reflectors: porcelain-enameled steel, aluminum or fiberglass reinforced polyester. 1274 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaires Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups A, B, C, D. Class II, Division 1 and 2, Groups E, F, G Class III Illustrated Features Weights Fixture Units Catalog Number Wt. lbs/kgs AAU-1N 7.6/3.4 AAU-15N 7.6/3.4 AAU-2NS 10.7/4.9 AAU-5NS 20.3/9.2 AAUA-15 15.0/6.8 AAUA-2 18.0/8.2 Mounting Hoods Type Wt. lbs/kg Pendant 1.3/.6 Ceiling 4.8/2.2 Stanchion 1.6/.7 Long Bracket 8.9/4.0 Short Bracket 4.8/2.2 Lighting: Explosionproof — Area — Incandescent Guards Catalog Number Wt. lbs/kgs AAGU-1 0.4/.2 AAGU-2 0.8/.4 AAGU-5 1.9/.9 AAGUA-15 0.5/.2 Standard Reflectors Catalog Number Wt. lbs/kgs AARP-2ST 2.8/1.3 AARW-15ST 2.1/1.0 AARW-2ST 2.9/1.3 AARW-5ST 4.3/2.0 AARW-15ST 2.1/1.0 30˚° Angle Reflectors Wt. lbs/kgs AARP-2AN 3.3/1.5 AARW-15AN 2.1/1.0 AARW-2AN 2.4/1.1 AARW-5AN 7.0/3.2 AARW-15AN 2.1/1.0 Lighting Catalog Number High Bay Reflectors Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Catalog Number Wt. lbs/kgs AARE-2HB 2.9/1.3 AARE-5HB 3.9/1.8 1275 A-51® Incandescent Factory Sealed Luminaire Classified Area Suitability Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups A, B, C, D. Class II, Division 1 and 2, Groups E, F, G Class III Fixture Unit Lamp Watts Without Reflectors Standard Dome 30°˚ Angle High Bay Supply Wire °F/°C Class I Division 1 and Division 2 Groups C and D AAU1N AAU15N AAU2NS 100 W A19 T5 T5 T5 — 257/125 100 W A21 T5 T5 T5 — 257/125 150 W A23 T3C T3C T3C — 257/125 200 W A25 T3C T3C T3C — 257/125 200 W PS25 T3C T3C T3C — 257/125 300 W PS25 T3C T3A T3A (D) — 257/125 200 W PS25 T3C T3C T3C — 230/110 200 W PS30 T3C T3C T3C — 230/110 300 W PS25 T3C T3C T3C — 230/110 300 W PS30 T3C T3C T3C — 230/110 Class I Division 1 and Division 2 Groups A †, B, C and D Lighting: Explosionproof — Area — Incandescent AAUA15 AAUA2 150 W A23 T3C T3C T3C — 230/110 150 W A25 T3C T3C T3C — 230/110 200 W A25 T3C T3C T3C — 230/110 200 W PS25 T3C T3C T3C — 230/110 200 W PS25 T3C T3C T3C — 230/110 200 W PS30 T3C T3C T3C — 230/110 300 W PS25 T3C T3C T3C — 230/110 300 W PS30 T3C T3C T3C — 230/110 T3C T3C — 257/125 Class II Division 1 and Division 2 Groups E, F and G AAU1N 100 W A19 100 W A21 T3C T3C T3C — 257/125 AAU15N 150 W A23 T3C T3C T3C — 257/125 200 W A25 T3C T3C T3C — 257/125 200 W PS25 T3 T3 T3 — 257/125 300 W PS25 T3 — — — 257/125 Lighting AAU2NS T3C 200 W PS25 T3C T3C T3C — 230/110 200 W PS30 T3C T3C T3C — 230/110 300 W PS25 T3C T3C T3A (EF) — 230/110 300 W PS30 T3C T3C T3A (EF) — 230/110 NOTE: Ambient suitability of these incandescent fixtures: 104°F/40 °C † For Group A, use Pendant Mount only. 1276 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaires For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Hub Size (Inches) Catalog Number ➋ 60-100 W (AAU-1N) A-21 1/2 AP1050 3/4 AP1075 1 AP10100 150-300 W (AAU-15N) A-23 PS-25 1/2 AP1550 3/4 AP1575 Type Pendant — One Hub, Rigid or Flexible Mounting 1 AP15100 1/2 AP2050 3/4 AP2075 1 AP20100 1/2 AC1050 3/4 AC1075 1 AC10100 1/2 AC1550 3/4 AC1575 1 AC15100 1/2 AC2050 3/4 AC2075 1 AC20100 60-100 W (AAU-1N) A-21 1-1/2 ➋ AN10150 150-300 W (AAU-15N) A-23 PS-25 1-1/2 ➋ AN15150 200-300 W (AAU-2NS) PS-30 1-1/2 ➋ AN20150 200-300 W (AAU-2NS) PS-30 Ceiling — Four Hubs, Three Close-up Plugs 150-300 W (AAU-15N) A-23 PS-25 200-300 W (AAU-2NS) PS-30 Lighting: Explosionproof — Area — Incandescent 60-100 W (AAU-1N) A-21 25° Stanchion — One Hub — Not UL Listed Lighting ➊ See A-51® Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures. ➋ 1-1/2” tapped hub furnished with a 1-1/2” to 1-1/4” reducer. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1277 A-51® Incandescent Factory Sealed Luminaires For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Hub Size (Inches) Type Catalog Number ➋ Long Bracket — Four Hubs, Three Close-up Plugs 60-100 W (AAU-1N) A-21 1/2 ALB1050 3/4 ALB1075 1 ALB10100 150-300 W (AAU-15N) A-23 PS-25 1/2 ALB1550 3/4 ALB1575 1 ALB15100 1/2 ALB2050 3/4 ALB2075 1 ALB20100 60-100 W (AAU-1N) A-21 1/2 ASB1050 3/4 ASB1075 150-300 W (AAU-15N) A-23 PS-25 1/2 ASB1550 3/4 ASB1575 200-300 W (AAU-2NS) PS-30 1/2 ASB2050 3/4 ASB2075 200-300 W (AAU-2NS) PS-30 Lighting Lighting: Explosionproof — Area — Incandescent 15° Short Bracket — Two Hubs, One Close-up Plug Three-Way Exit Sign Epoxy enameled steel – 6”/152.4 mm-high red lettering 60-200 W (Mounts to AAU-1N or AAU-15N fixture units in place of guard) CJEXRN Epoxy enameled steel – 6”/152.4 mm-high red lettering 60-200 W (Mounts to AAU-1N or AAU-15N fixture units in place of guard) (See page G2-24 for dimensions) AEXR-15R Single-Sided Exit Sign Guard — Add suffix to fixture catalog number -G Guard ➊ See A-51® Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures. 1278 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaire Accessories For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Mounting Hoods Type Hub Size (Inches) Catalog Number Pendant — One Hub, Rigid or Flexible Mounting 1/2 AAP-50 3/4 AAP-75 1 AAP-100 1/2 AAC-50 3/4 AAC-75 1 AAC-100 Ceiling — Four Hubs, Three Close-up Plugs 25° Stanchion — Not UL Listed — One Hub 1-1/2 AAN-150 ➊ Long Bracket — Four Hubs, Three Close-up Plugs AALB-50 3/4 AALB-75 1 AALB-100 1/2 AASB-50 3/4 AASB-75 15˚ Short Bracket — Two Hubs, One Close-up Plug Type Catalog Number Fixture Units 60-100 W A-21 AAU-1N 150-300 W A-23 & PS-25 AAU-15N 200-300 W PS-30 AAU-2NS 60-100 W (AAU-1N) AAGL-1PR 150-300 W (AAU-15N) AAGL-1PR 200-300 W (AAU-2NS) AAGL-2PR 60-100 W (AAU-1N) AAGU-1 150-300 W (AAU-15N) AAGU-1 200-300 W (AAU-2NS) AAGU-2 300-500 W (AAU-5NS) AAGU-5 Lighting: Explosionproof — Area — Incandescent 1/2 Prismatic Glass Globes ➊ 1-1/2” tapped hub furnished with a 1-1/2” to 1-1/4” reducer. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1279 Lighting Aluminum Guards A-51® Incandescent Factory Sealed Luminaire Accessories For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Type Standard Dome Fixture Size Catalog Number (Not for use with short brackets) Porcelain Polyester 60-100 W (AAU-1N) 150-300 W (AAU-15N) 200-300 W (AAU-2NS) 300-500 W (AAU-5NS) Porcelain AARW-15ST AARW-15ST AARW-2ST AARW-5ST Polyester — — AARP-2ST — 60-100 W (AAU-1N) 150-300 W (AAU-15N) 200-300 W (AAU-2NS) AARW-15AN AARW-15AN AARW-2AN — — AARP-2AN 30˚ Angle Porcelain Polyester Colored Glass Globes Lighting: Explosionproof — Area — Incandescent Amber AAGL-1A AAGL-1A AAGL-2A 60-100 W (AAU-1N) 150-300 W (AAU-15N) 200-300 W (AAU-2NS) Green AAGL-1G AAGL-1G AAGL-2G 60-100 W (AAU-1N) 150-300 W (AAU-15N) 200-300 W (AAU-2NS) Red 60-100 W (AAU-1N) 150-300 W (AAU-15N) 200-300 W (AAU-2NS) AAGL-1R AAGL-1R AAGL-2R 60-100 W (AAU-1N) — Medium Base 150-300 W (AAU-15N) — Medium Base 200-300 W (AAU-2NS) — Medium Base 300-500 W (AAU-5NS) — Mogul Base AASP-11 AASP-22 AASP-22 AASP-44 Replacement Socket Connection Block Fits A-51 Mounting Hoods VPT-7 Lighting 60-500 W Globe Gaskets — Fiber and Aluminum Requires one of each 60-300 W (AAU-1N and AAU-15N) 200-300 W (AAU-2NS) 300-500 W (AAU-NS) 1280 Fiber AASP-15V AASP-2V AASP-5V Aluminum AASP-15A AASP-2A AASP-5A Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaire Dimensions For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. 3.38"/ 85.9 mm 5.38"/ 116.7 mm 4.69"/ 119.1 mm Stanchion .38"/ 2.69"/ 9.7 mm 68.3 mm 2.63"/ 66.8 mm .38"/ 9.7 mm 5.75"/ 146.1 mm Size (Watts) 4.75"/ 120.7 mm 1.31"/ 33.3 mm Pendant ➊ Ceiling Long Bracket Short Bracket C A B C A B C 7.06/ 13.75/ 13.13/ 12.38/ 13.56/ 12.94/ 9.13/ 179.3 349.3 333.5 314.5 344.4 328.7 231.9 150-300 11.47/ 10.85/ 11.50/ 12.25/ 11.63/ 7.06/ 13.75/ 13.13/ 291.3 275.6 292.1 311.2 295.4 179.3 349.3 333.5 7.06/ 13.75/ 13.13/ 12.38/ 13.56/ 12.94/ 9.13/ 179.3 349.3 333.5 314.5 344.4 328.7 231.9 200-300 13.07/ 12.38/ 12.71/ 13.94/ 13.25/ 8.81/ 15.44/ 14.75/ 332.0 314.5 322.8 354.1 336.6 223.8 392.2 374.7 8.81/ 15.50/ 14.75/ 13.25/ 15.19/ 14.50/ 10.13/ 223.8 392.2 374.7 336.6 385.8 363.8 257.3 300-500 15.09/ 14.34/ 14.64/ 16.00/ 15.25/ 12.13/ 17.50/ 17.75/ 12.13/ 17.50/ 16.75/ 14.88/ 17.25/ 16.50/ 11.94/ 383.3 364.2 371.8 406.4 387.4 308.1 444.5 450.9 308.1 444.5 425.9 378.0 438.2 419.1 303.3 60-100 A➋ B➋ A B A 60-100 Size (Watts) 12.00/304.8 4.50/114.3 10.00/254.0 7.63/193.8 - B 150-200 14.00/355.6 4.38/111.3 10.00/254.0 7.63/193.8 - - 200-300 16.00/406.4 5.19/131.8 12.00/304.8 7.88/200.2 12.00/304.8 6.06/153.9 300-500 20.00/508.0 6.84/173.7 18.00/457.2 13.13/333.5 18.00/457.2 9.13/231.9 - Lighting: Explosionproof — Area — Incandescent A B C A B C A B 11.47/ 10.85/ 11.50/ 12.25/ 11.63/ 7.06/ 13.75/ 13.13/ 291.3 275.6 292.1 311.2 295.4 179.3 349.3 333.5 Lighting ➊ For dimensions of fixture unit only, subtract pendant hood dimension 1.31”/3.3 cm from dimensions A and B as listed. ➋ Dimensions illustrated are for porcelain steel (dome and angle) and etched aluminum (high bay). Overall dimensions for fiberglass reinforced polyester reflectors are: standard dome – 16-1/2”/419.1 mm dia., 6” high; 30° Angle – 14-3/8”/374.7 mm dia., 10”/254 mm high. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1281 A-51® Incandescent Factory Sealed Luminaire Photometric Data For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Photometric data shown here is based on a 200- watt type PS-30 lamp and is representative of the performance for all A-51 incandescent fixtures using 60-watt to 500-watt lamps. For candlepower values of fixtures with other lamps, use the following multipliers: 60 W A-19 – 0.23; 150 W A-21 – 0.75; 200 W A-25 – 1.02; 300 W PS-25 – 1.70; 300 W PS-35 – 1.55; 500 W PS-40 – 2.69. A-51 Incandescent Fixture without Reflector Spacing to Mtg. Ht. Ratio 1.25:1 Guard .877 100 W A-19 – 0.47; 200 W A-23 – 1.07; 200 W PS-25 – 1.03: 300 W PS-30 – 1.63; 500 W PS-35 – 2.95; To determine candlepower values of fixtures with a guard, multiply by value shown with each curve. Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .735 .690 .651 .695 .655 .618 .622 .590 .561 .554 .530 .506 .493 .473 .454 .422 ROOM CAVITY RATIOS 2 .621 .558 .503 .588 .530 .481 .525 .478 .437 .467 .430 .396 .413 .384 .357 .327 3 .540 .468 .411 .512 .446 .394 .457 .404 .359 .406 .363 .327 .360 .325 .294 .267 4 .474 .400 .342 .450 .381 .328 .402 .346 .301 .359 .312 .274 .318 .280 .248 .223 5 .415 .341 .284 .394 .325 .272 .354 .295 .251 .316 .266 .229 .280 .240 .207 .184 6 .372 .297 .245 .352 .284 .233 .316 .258 .215 .283 .234 .197 .252 .210 .178 .157 7 .334 .262 .213 .317 .249 .203 .285 .227 .187 .255 .207 .170 .228 .187 .155 .136 8 .300 .231 .182 .285 .221 .175 .256 .202 .162 .231 .183 .148 .206 .165 .135 .117 9 .271 .204 .157 .258 .195 .152 .233 .178 .140 .209 .162 .128 .187 .146 .117 .100 10 .246 .181 .139 .234 .175 .135 .212 .160 .124 .191 .145 .113 .172 .132 .102 .087 Lighting: Explosionproof — Area — Incandescent A-51 Incandescent Fixture with Standard Dome Reflector Spacing to Mtg. Ht. Ratio 1.25:1 Guard .890 Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .757 .727 .700 .740 .713 .689 .709 .686 .667 .681 .663 .646 .656 .641 .627 .612 ROOM CAVITY RATIOS 2 .660 .613 .572 .647 .603 .567 .621 .585 .552 .598 .568 .540 .577 .551 .528 .512 3 .580 .524 .478 .570 .516 .475 .549 .504 .466 .529 .490 .458 .511 .478 .449 .434 4 .514 .452 .403 .504 .446 .400 .486 .436 .395 .469 .425 .390 .454 .415 .384 .368 5 .451 .385 .336 .442 .380 .334 .427 .372 .332 .413 .364 .327 .399 .357 .323 .308 6 .402 .336 .291 .394 .333 .286 .381 .326 .285 .369 .319 .282 .358 .313 .279 .264 7 .361 .296 .254 .355 .293 .250 .343 .286 .247 .332 .282 .245 .323 .278 .243 .229 8 .323 .261 .216 .318 .258 .216 .308 .254 .215 .299 .249 .213 .290 .245 .211 .197 9 .291 .230 .187 .287 .227 .187 .278 .223 .186 .269 .219 .184 .262 .216 .182 .169 Lighting 10 .264 .204 .166 .259 .204 .166 .253 .200 .164 .245 .197 .162 .240 .194 .161 .149 1282 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaire Photometric Data For Group C and D Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Photometric data shown here is based on a 200watt type PS-30 lamp and is representative of the performance for all A-51 incandescent fixtures using 60-watt to 500-watt lamps. For candlepower values of fixtures with other lamps, use the following multipliers: 60 W A-19 – 0.23; 150 W A-21 – 0.75; 200 W A-25 – 1.02; 300 W PS-25 – 1.70; 300 W PS-35 – 1.55; 500 W PS-40 – 2.69. 100 W A-19 – 0.47; 200 W A-23 – 1.07; 200 W PS-25 – 1.03: 300 W PS-30 – 1.63; 500 W PS-35 – 2.95; To determine candlepower values of fixtures with a guard, multiply by value shown with each curve. Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc A-51 Incandescent Fixture with High Bay Reflector % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .686 .644 .645 .671 .651 .634 .644 .628 .614 .620 .607 .595 .598 .588 .577 .566 Spacing to Mtg. Ht. Ratio 1.40:1 Guard .865 12.00"/ 304.8 mm ROOM CAVITY RATIOS 2 .614 .580 .549 .603 .571 .545 .581 .555 .531 .562 .540 .520 .544 .525 .508 .496 3 .550 .508 .473 .542 .501 .470 .524 .490 .461 .507 .478 .454 .492 .467 .446 .434 4 .493 .445 .408 .486 .441 .404 .470 .431 .400 .456 .422 .395 .443 .413 .389 .377 5 .439 .387 .349 .432 .383 .347 .420 .376 .344 .407 .369 .340 .396 .383 .336 .324 6 .393 .340 .304 .387 .338 .300 .376 .331 .298 .366 .326 .296 .356 .320 .293 .281 7 .352 .299 .264 .347 .296 .261 .337 .290 .258 .327 .287 .256 .320 .283 .254 .242 8 .313 .261 .224 .309 .259 .223 .300 .255 .222 .293 .251 .220 .285 .247 .219 .207 9 .280 .228 .191 .276 .225 .191 .268 .222 .190 .261 .219 .189 .254 .216 .187 .176 10 .252 .201 .168 .248 .201 .168 .242 .197 .167 .236 .195 .165 .231 .192 .164 .153 Lighting: Explosionproof — Area — Incandescent A-51 Incandescent Fixture with 30°˚ Reflector 11.16"/ 283.5 mm B— Back S—Side F—Front G—Front W.Guard Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1283 A-51® Incandescent Factory Sealed Luminaires For Group A and B Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Hub Size (Inches) Catalog Number ➊➋ Pendant — One Hub, Rigid or Flexible Mounting 60-200 W (AAUA-15) 1/2 AAPA1550 PS-25 3/4 AAPA1575 200-300 W (AAUA-2) 1/2 AAPA2050 PS-30 3/4 AAPA2075 60-200 W (AAUA-15) 1/2 AACA1550 PS-25 3/4 AACA1575 200-300 W (AAUA-2) 1/2 AACA2050 PS-30 3/4 AACA2075 60-200 W (AAUA-15) 1/2 AASBA1550 PS-25 3/4 AASBA1575 200-300 W (AAUA-2) 1/2 AASBA2050 PS-30 3/4 AASBA2075 Porcelain Polyester Lighting: Explosionproof — Area — Incandescent Ceiling — Four Hubs, Three Close-up Plugs 15˚ Short Bracket — Two Hubs, One Close-up Plug Reflectors Porcelain Polyester Standard Dome 60-200 W (AAUA-15) AARW-15ST 200-300 W (AAUA-2) AARW-2ST 60-200 W (AAUA-15) AARW-15AN 200-300 W (AAUA-2) AARW-2AN AARP-2ST 30˚ Angle Lighting AARP-2AN ➊ See A-51® Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures. ➋ Add suffix -G to catalog number for optional guard. Shaded area indicates pendant mount is suitable for Class I, Group A in addition to other applicable area suitabilities. 1284 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaires For Group A and B Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Mounting Hoods Type Hub Size (Inches) Catalog Number One Hub, Rigid or Flexible Mounting 1/2 AAP-50 ➊ 3/4 AAP-75 ➊ Four Hubs, Three Close-up Plugs 1/2 AAC-50 3/4 AAC-75 Two Hubs, One Close-up Plug 1/2 AASB-50 3/4 AASB-75 Pendant Ceiling 15˚ Short Bracket Description Catalog Number 60-200 W PS-25 AAUA-15 200-300 W PS-30 AAUA-2 60-200 W (AAUA-15) AAGLA-15 200-300 W (AAUA-2) AAGLA-2 60-200 W (AAUA-15) AAGUA-15 200-300 W (AAUA-2) AAGU-2 60-200 W (AAUA-15) AASPA-15 200-300 W (AAUA-2) AASPA-22 Globe and Ring Assembly Aluminum Guards Lighting: Explosionproof — Area — Incandescent Fixture Units Medium Base Lamp Socket Fits all A-51 and AA-51 mounting hoods 60-300 W VPT-7 ➊ Group A pendant mount only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1285 Lighting Connection Block A-51® Incandescent Factory Sealed Luminaire Dimensions For Group A and B Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Dimensions in In/mm 4.75"/ 120.7 mm 3.38"/ 85.9 mm 5.38"/ 116.7 mm .38"/ 9.7 mm 2.63"/ 66.8 mm 4.69"/ 119.1 mm .38"/ 9.7 mm Size (Watts) Pendant A B Ceiling C A B Short Bracket C A B C 60-200 13.69/347.7 13.13/333.5 7.06/179.3 16.50/419.1 15.94/404.9 7.06/179.3 15.00/381.0 14.44/366.8 9.50/241.3 200-300 14.75/374.7 13.69/347.7 8.81/223.8 17.56/446.0 16.50/419.1 8.81/223.8 16.00/406.4 15.44/392.2 10.38/263.7 Lighting Lighting: Explosionproof — Area — Incandescent 1.31"/ 33.3 mm 1286 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 A-51® Incandescent Factory Sealed Luminaire Photometric Data For Group A and B Locations. Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit. Photometric data shown here is based on a 200-watt type PS-25 lamp, and is representative of the performance for A-51 incandescent fixtures (Groups A and B). For candlepower values of fixtures with other lamps, use the following multipliers: 150 W (PS-25) – 0.70; and 300 W (PS-25) – 1.6. To determine candlepower values of fixtures with a guard, multiply by value shown with each curve. Effective Floor Cavity Reflectance (Rfc) is 20% (No Reflector) % Ceiling Rcc % Walls Rw 80 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .711 .669 .630 .669 .631 .595 .590 .560 .533 .518 .495 .473 .452 .434 .417 .383 ROOM CAVITY RATIOS 2 .602 .541 .488 .567 .511 .465 .499 .455 .416 .437 .402 .371 .380 .352 .327 .296 7.13"/ 181.1 mm 3 .519 .449 .393 .488 .424 .374 .430 .379 .336 .375 .335 .300 .325 .292 .264 .236 4 .456 .384 .328 .430 .364 .312 .379 .325 .282 .332 .288 .252 .288 .252 .223 .197 5 .400 .328 .274 .378 .311 .260 .334 .278 .236 .293 .247 .211 .254 .217 .187 .164 6 .357 .285 .234 .336 .270 .221 .297 .242 .200 .261 .215 .180 .227 .188 .159 .138 7 .318 .248 .200 .300 .234 .190 .265 .209 .171 .233 .187 .153 .204 .165 .135 .116 8 .287 .219 .172 .270 .208 .164 .240 .187 .149 .212 .167 .134 .104 .147 .119 .101 9 .260 .194 .150 .246 .185 .143 .218 .166 .130 .192 .148 .117 .168 .131 .103 .087 10 .236 .173 .132 .222 .166 .126 .199 .149 .114 .175 .133 .102 .154 .117 .090 .075 Effective Floor Cavity Reflectance (Rfc) is 20% (No Reflector) % Ceiling Rcc 50 30 70 10 50 30 50 10 50 30 30 10 50 30 10 10 50 30 0 10 0 1 .797 .763 .733 .779 .748 .721 .745 .720 .697 .715 .695 .676 .689 .671 .655 .640 14.00"/ 355.6 mm ROOM CAVITY RATIOS 2 .687 .633 .586 .673 .622 .581 .645 .603 .566 .620 .585 .553 .597 .567 .541 .524 3 .594 .530 .478 .583 .522 .474 .560 .508 .464 .538 .494 .457 .519 .481 .448 .431 4 .527 .458 .404 .517 .452 .400 .497 .440 .395 .479 .430 .390 .462 .419 .384 .366 5 .466 .393 .340 .456 .388 .337 .440 .379 .335 .424 .371 .330 .410 .364 .326 .310 6 .414 .342 .292 .406 .339 .288 .391 .331 .286 .378 .324 .283 .367 .317 .280 .264 7 .369 .298 .252 .362 .294 .248 .350 .288 .245 .337 .284 .242 .328 .279 .240 .225 8 .333 .265 .217 .327 .262 .216 .316 .257 .215 .307 .252 .213 .297 .248 .211 .196 9 .302 .235 .189 .297 .232 .189 .287 .229 .188 .278 .224 .186 .270 .221 .185 .170 10 .273 .209 .167 .268 .209 .167 .261 .204 .166 .253 .201 .163 .247 .198 .162 .149 Lighting: Explosionproof — Area — Incandescent % Walls Rw 80 Lighting 11.16"/ 283.5 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1287 EDT Incandescent Luminaires Dust-Ignitionproof Suitable for use in Wet Locations. Class II, Division 1 and 2, Groups E, F, G Class III Description Watts Hub Size (Inches) 60-200 W 1/2 Catalog Number Pendant Lighting Fixture ➊ 9.00"/ 228.6 mm One tapped opening for rigid or flexible mounting, with heat-resistant clear globe EDTP2050 5.25"/ 133.4 mm Heat-Resistant Clear Glass Globe 4.28"/ 108.7 mm 7.00"/ 177.8 mm 60-200 W VSGL-2HR 60-200 W DPGU-2 60-200 W VPLR-123 5.25"/ 133.4 mm 4.28"/ 108.7 mm 7.00"/ 177.8 mm 5.25"/ 133.4 mm Replacement Porcelain Shock-Absorbing Socket — Medium Base Lighting Lighting: Explosionproof — Area — Incandescent Globe Guard ➊ T3C maximum operating temperature. Supply wire 302 °F/150 °C. Maximum ambient temperature 77 °F/25 °C. Vertical mount only (globe down). 1288 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Floodlights Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III CSA 4X Applications • UL Listed for Marine Type Electric Fixtures Outside Type (Salt Water). • Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities on land and marine platforms. • Class I, Division 1 areas include: (1) enclosed derricks, mud tanks, desander-desilter, gasoperated control devices, oil-gas separation vessels, shale shakers and flowing or beam wells (2) flowing or beam wells in open areas with cellar or below grade sump (3) on refinery docks where tankers are loaded with hoses or loading arms (4) in compressor buildings (open or enclosed) where methane gas is present • Virtually all enclosed areas at drilling operations or refineries where ventilation is inadequate, or where a cellar or below grade sump exists, are Class I, Division 1. Shown with Optional High Bay Reflector Features Effective Protected area: 1.8 Square Feet Options • Fuses for field installation are ordered by catalog number from the fuse kit table • Quartz Auxiliary Emergency Lamp for PSMH and HPS fixtures. Relay switch installed fixture. Add suffix -E to fixture catalog number. • “Smart Hot Restrike” Emergency Option available for 150 W HPS. Add suffix -SR. • Hot Restrike Option available for 150 W HPS. Add suffix -R. • Smart Starter. Add suffix -S Certifications and Compliances • • • • UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified: 025428 Lighting: Explosionproof — Floodlight • Choice of mountings: (1) crossarm with degree indicator; (2) junction box for horizontal or vertical mount; and (3) swivel for pole mount (screws onto standard 2” pipe threads). • Fixtures operate safely in high ambient temperatures. For example, in Class I areas the 150 W HPS unit operates at a maximum fixture surface temperature of 248 °F/120 °C in a 149 °F/65 °C ambient (212 °F/100 °C temperature in a 104 °F/ 40 °C ambient). • Arrangement of heat-producing components results in more efficient heat dissipation for cooler fixture operation. • All threaded joints are flame-tight. • Five threads are always fully engaged in an explosionproof manner. • Factory sealed. External seals not required. • Strategic location of lamp socket, in combination with the interior prism design of the glass globe, provides optimum light distribution and control. • Heat- and impact-resistant globes have smooth dust-resistant exterior. • Superior corrosion resistance, with epoxy powder coat finish. • Ballasts operate at low temperatures – PSMH: -20 °F/-29 °C; HPS: -40 °F/ -40 °C. Standard Materials • Ballast housing, guard and junction box, and pole mounts: copperfree (4/10 of 1% max.) aluminum • Crossarm mount: malleable iron • Trunnion: steel. • High bay reflector: aluminum • Standard dome, deep dome and 30° angle reflectors: fiberglass reinforced polyester • Socket: porcelain • Screw shell: nickel-plated phosphor bronze Standard Finishes • Ballast housing, guard, trunnion and mounting accessories: epoxy-clad finish. Powder coat baked finish, electrostatically applied for complete, uniform corrosion protection Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting V CSA Certification only. 1289 Code•Master 2™ HID Factory Sealed Floodlights Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III CSA 4X Classified Area Suitability — Suitability includes use of reflector Lamp Type High Pressure Sodium Pulse Start Metal Halide Supply Wire (°F/˚°C) Ambient Temp (°F/°˚C) 150 122/60 104/40 T5 C,D Class II, Division 1 & 2 With Globe or with Globe & Reflector CEC Temp. Ident. No. Nameplate CEC V Marking Groups B, C, D T3A E,F 150 167/75 131/55 — C,D B, C, D T3 — 250 167/75 104/40 T4 C,D B, C, D — — 250 167/75 131/55 — C,D B, C, D — — 400 185/85 104/40 T3A C,D B, C, D — — 175 167/75 104/40 T3B C,D B, C, D T3C E,F,G 250 167/75 104/40 T3B C,D B, C, D T3A E,F 320 167/75 104/40 T3 C,D B, C, D — — 350 167/75 104/40 T3 C,D B, C, D — — 400 167/75 104/40 T3 C,D B, C, D — — 175 167/75 104/40 T4 — B, C, D T3C E, F, G 250 167/75 104/40 T4 — B, C, D T3A E, F 400 167/75 104/40 T3C — B, C, D — — Lighting Lighting: Explosionproof — Floodlight Metal Halide V Lamp Watts Class I, Division 1 & 2 With Globe or with Globe & Reflector UL/NEC/CEC Temp. Ident. No. Nameplate NEC CEC V Marking Groups Groups V CSA Certification only. 1290 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Floodlights Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH. Mogul Base. NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) Lamp Watts ANSI Lamp Type HPS PSMH HPS Catalog Number ➊➌ PSMH Fixture Unit Furnished with Trunnion 3/4” hub. (3/4 – 14 NPT) 150 175 250 320 350 400 S55 — S50 — — S51 M102 M137/M152 M138/M153 M145 M131 M135/M155 CFL150MT — CFL250MT — — CFL400MT CFP150MT CFP175MT CFP250MT CFP320MT CFP350MT CFP400MT Fixture Unit with Junction Box for Horizontal or Vertical Mounting ➋ 3/4” fixture hub and two conduit openings (3/4 – 14 NPT). 30” Flexible Coupling connects to 3/4” fixture hub and to 1/2” junction box opening. Furnished with one 3/4” Close-up Plug. Has Locking Screw for horizontal adjustment. 150 175 250 320 350 400 S55 — S50 — — S51 M102 M137/M152 M138/M153 M145 M131 M135/M155 CFL150JBMT — CFL250JBMT — — CFL400JBMT CFP150JBMT CFP175JBMT CFP250JBMT CFP320JBMT CFP350JBMT CFP400JBMT Fixture Unit with Pole-Top Mount (on 2” Threaded Pipe) ➋ 2” tapered threads (2 – 11-1/2 NPT). Locking Screw for horizontal adjustment. 30” Flexible Coupling connects to 3/4” fixture hub (3/4 – 14 NPT) and to 1/2” pole-top opening (1/2-14 NPT). 150 S55 M102 CFL150SFMT CFP150SFMT 175 — M137/M152 — CFP175SFMT 250 S50 M138/M153 CFL250SFMT CFP250SFMT 320 — M145 — CFP320SFMT 350 — M131 — CFP350SFMT 400 S51 M135/M155 CFL400SFMT CFP400SFMT For mounting to flat surface. 180° horizontal adjustment with degree indicator. 30” Flexible Coupling connects to 3/4” fixture hub (3/4 – 14 NPT) and to any 1/2” opening (1/2 – 14 NPT). 150 175 250 320 350 400 S55 — S50 — — S51 M102 M137/M152 M138/M153 M145 M131 M135/M155 CFL150CAMT — CFL250CAMT — — CFL400CAMT CFP150CAMT CFP175CAMT CFP250CAMT CFP320CAMT CFP350CAMT CFP400CAMT Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1291 Lighting ➊ To order fixture with guard, add suffix -G before voltage suffix. ➋ Fixtures furnished with trunnion and bolts, flexible coupling and fittings, and mounting accessory. The trunnion provides vertical adjustment and the mounting accessory provides horizontal adjustment. ➌ Change suffix -MT (120/208/240/277 V) to -480 for 480 V. Lighting: Explosionproof — Floodlight Fixture Unit with Crossarm Mounting ➋ Code•Master 2™ HID Factory Sealed Floodlights V Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Mogul Base. CEC: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III CSA 4X Lamp Watts HPS ANSI Lamp Type PSMH MH HPS Catalog Number ➊➌ PSMH MH Fixture Unit Furnished with Trunnion 3/4” hub. (3/4 – 14 NPT) 150 175 250 320 350 400 S55 — S50 — — S51 M102 M137/M152 M138/M153 M145 M131 M135/M155 — M57/H39 M58/H37 — — M59/H33 CFL150TTCN — CFL250TTCN — — CFL400TTCN CFP150TTCN CFP175TTCN CFP250TTCN CFP320TTCN CFP350TTCN CFP400TTCN — CFH175TTCN CFH250TTCN — — CFH400TTCN Fixture Unit with Junction Box for Horizontal or Vertical Mounting ➋ 3/4” fixture hub and two conduit openings (3/4 – 14 NPT). 30” Flexible Coupling connects to 3/4” fixture hub and to 1/2” junction box opening. Furnished with one 3/4” Close-up Plug. Has Locking Screw for horizontal adjustment. 150 175 250 320 350 400 S55 — S50 — — S51 M102 M137/M152 M138/M153 M145 M131 M135/M155 — M57/H39 M58/H37 — — M59/H33 CFL150JBTTCN — CFL250JBTTCN — — CFL400JBTTCN CFP150JBTTCN CFP175JBTTCN CFP250JBTTCN CFP320JBTTCN CFP350JBTTCN CFP400JBTTCN — CFH175JBTTCN CFH250JBTTCN — — CFH400JBTTCN Fixture Unit with Pole-Top Mount (on 2” Threaded Pipe) ➋ Lighting Lighting: Explosionproof — Floodlight 2” tapered threads (2 – 11-1/2 NPT). Locking Screw for horizontal adjustment. 30” Flexible Coupling connects to 3/4” fixture hub (3/4 – 14 NPT) and to 1/2” pole-top opening (1/2-14 NPT). CFL150SFTTCN CFP150SFTTCN 150 S55 M102 — 175 — M137/M152 M57/H39 250 S50 M138/M153 M58/H37 320 — M145 — — CFP320SFTTCN — 350 — M131 — — CFP350SFTTCN — 400 S51 M135/M155 M59/H33 — CFL250SFTTCN CFL400SFTTCN — CFP175SFTTCN CFH175SFTTCN CFP250SFTTCN CFH250SFTTCN CFP400SFTTCN CFH400SFTTCN Fixture Unit with Crossarm Mounting ➋ For mounting to flat surface. 180° horizontal adjustment with degree indicator. 30” Flexible Coupling connects to 3/4” fixture hub (3/4 – 14 NPT) and to any 1/2” opening (1/2 – 14 NPT). 150 175 250 320 350 400 S55 — S50 — — S51 M102 M137/M152 M138/M153 M145 M131 M135/M155 — M57/H39 M58/H37 — — M59/H33 CFL150CATTCN — CFL250CATTCN — — CFL400CATTCN CFP150CATTCN CFP175CATTCN CFP250CATTCN CFP320CATTCN CFP350CATTCN CFP400CATTCN — CFH175CATTCN CFH250CATTCN — — CFH400CATTCN ➊ To order fixture with guard, add suffix -G before voltage suffix. ➋ Fixtures furnished with trunnion and bolts, flexible coupling and fittings, and mounting accessory. The trunnion provides vertical adjustment and the mounting accessory provides horizontal adjustment. ➌ Change voltage suffix -TT (120/277/347 V) to -MT for 120/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V V CSA Certification only. 1292 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Floodlight Accessories Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. Description Junction Box for Horizontal or Vertical Mounting Box has 1/2” opening for threading to Flexible Coupling, and two 3/4” conduit openings (3/4 – 14NPT) and is furnished with one 3/4” close-up plug. Locking screw for horizontal adjustment. Trunnion bolts furnished. Aluminum, gray epoxy finish. Catalog Number AF-JB Pole-Top Mount (on 2” Threaded Pipe) Threads onto 2” pipe with tapered threads (2-11 – 1/2 NPT). Includes floodlight trunnion bolts. Locking screw for horizontal floodlight adjustment. Aluminum, gray epoxy finish. AF-SF Has 180° horizontal adjustment – degree-marked. Facilitates mounting floodlight to crossarm or other flat surface, or to G-AM-8-WB Pole/Wall Mounting Bracket (see photo below). Includes floodlight trunnion bolts. Malleable iron, plated, chromate sealed, architectural bronze EPOXY finish. G-AM-8-CA Crossarm Mounting Bracket Polyester Reflectors – 150 W through 400 W Standard Dome Deep Dome 30° Angle CMR-4ST CMR-4DD CMR-4AN Aluminum High Bay Reflectors – 150 W through 400 W CMR-4HB Flexible Coupling – 30” Long Connects to 3/4” Fixture Unit hub (3/4 – 14 NPT) and to 1/2” Junction Box or Pole-Top Accessory opening (1/2 – 14 NPT). AF-EXL Quartz Emergency Lamp for Pulse Start Metal Halide and High Pressure Sodium Fixtures Fixtures can be supplied with a socket to accept a 150 W or 250 W, 120 V quartz lamp. This D.C. bayonet base socket is in addition to the standard lamp socket, independent of the lighting fixture voltage. Lighting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Floodlight -E HPS Smart Hot Restrike Smart Hot Restrike will immediately restrike an HPS lamp when power is restored after a momentary power interruption. The smart function removes the hot restrike ignitor from the circuit if the lamp burns out or is removed from the socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location, reducing maintenance and repair costs. Optional for 150 W fixtures (HPS only) Add Suffix -SR HPS Hot Restrike Restrikes HPS lamp immediately when power is restored after a momentary power interruption. Optional for 150 W fixtures (HPS only) Add Suffix -R HPS Smart Starter Smart Starter for HPS and PSMH fixtures. Incorporates a 1-1/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location, reducing maintenance and repair costs. Optional for all fixture watts Add Suffix -S G-AM-8-CA Crossarm Mounting Bracket Shown with G-AM-8-WB Pipe/Wall Mounting Bracket. The G-AM-8-WB bracket is not furnished with fixtures. 1293 Code•Master 2™ HID Factory Sealed Floodlight Ballast and Fuse Data Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) Lamp Watts 150 175 250 320 350 Ballast Amps Pulse Start Metal Halide Super CWA Start Operating — — — — — — — — — — — — 1.10 1.86 0.75 1.23 0.65 0.98 0.55 0.87 0.25 0.65 0.25 0.50 1.96 2.50 1.13 1.45 0.98 1.25 0.85 1.10 0.62 0.90 0.32 0.67 3.30 3.25 1.90 1.90 1.60 1.65 1.40 1.40 0.70 1.10 0.45 0.85 3.60 3.70 2.10 2.10 1.80 1.80 1.60 1.60 0.70 1.01 0.60 0.90 3.50 4.00 2.00 2.30 1.75 2.00 1.75 1.50 1.10 1.35 0.75 1.00 Metal Halide CWA Start Operating — — — — — — — — — — — — 1.30 1.80 0.75 1.10 0.65 0.90 0.55 0.80 0.50 0.65 — — 1.20 2.60 0.65 1.50 0.60 1.30 0.50 1.12 0.80 0.90 — — — — — — — — — — — — — — — — — — — — — — — — — — 3.25 4.00 1.90 2.30 1.65 2.00 1.40 1.75 1.20 1.40 — — Fuse Kit Catalog Number Fuse Quantity Required 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 1 2 2 1 1 2 HPS CF-10 CF-5 CF-5 CF-5 CF-5 CF-3 — — — — — — CF-8 CF-5 CF-5 CF-5 CF-5 CF-2 — — — — — — — — — — — — CF-15 CF-8 CF-5 CF-5 CF-5 CF-5 PSMH — — — — — — CF-5 CF-3 CF-3 CF-2 CF-2 CF-2 CF-8 CF-5 CF-5 CF-3 CF-3 CF-2 CF-8 CF-6 CF-5 CF-5 CF-5 CF-3 CF-10 CF-8 CF-5 CF-5 CF-5 CF-3 CF-10 CF-8 CF-5 CF-5 CF-5 CF-3 MH — — — — — — CF-5 CF-3 CF-3 CF-2 CF-2 — CF-8 CF-5 CF-5 CF-3 CF-3 — — — — — — — — — — — — — CF-10 CF-8 CF-5 CF-5 CF-5 — Lighting Lighting: Explosionproof — Floodlight 400 Volts 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 120 208 240 277 347 480 High Pressure Sodium ➊ Start Operating 2.00 1.66 1.16 0.96 1.00 0.83 0.88 0.75 0.52 0.56 0.50 0.44 — — — — — — — — — — — — 1.75 2.70 1.00 1.50 0.85 1.30 0.75 1.15 0.60 0.93 0.40 0.65 — — — — — — — — — — — — — — — — — — — — — — — — 3.10 3.90 1.80 2.25 1.60 1.95 1.35 1.70 1.00 1.32 0.80 1.00 CEC: V Class I, Division 1 and 2, Groups B, C, D Class II, Division 1, Groups E, F, G Class II, Division 2, Groups F, G Class III CSA 4X Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily in ballast body with one screw. Order one fuse for 120 and 277 V, and 2 fuses for 208, 240 and 480 V. CF-2 = 2 amp; CF-3 = 3 amp; CF-5 = 5 amp; CF-6 = 6 amp; CF-8 = 8 amp; CF-10 = 10 amp ➊ 50 through 150 W HPS have H.P.F. High Reactance ballasts; 250 W and 400 W HPS have CWA ballasts. V CSA Certification only. 1294 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ HID Factory Sealed Floodlight Dimensions Marine (Outside Type). Explosionproof Integrally Ballasted. 150 W, 250 W, 400 W HPS; 150 W, 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH V. Mogul Base. Dimensions in Inches/Millimeters 2.95"/ 74.9 mm 3.25"/ 82.6 mm 2.38"/ 60.5 mm 4.75"/ 120.7 mm 4.75"/ 120.7 mm 5.70"/ 144.8 mm 5.00"/ 127 mm Dia. 5.65"/ 143.5 mm 4.94"/ 125.5 mm 2.38"/ 60.5 mm 36.44"/ 925.6 mm 16.44"/ 417.6 mm 15.94"/ 404.9 mm 3.50"/ 88.9mm 5.00"/ 127 mm 11.50"/ 292.1 mm 1.75"/ 44.5 mm / 80" 20..3 mm 528 1.50"/ 38.1 mm 4.44"/ 112.8 mm 0"/ 13.0 mm 330.2 / .6" m 23 .4 m 9 / 59 0.6"mm 2 .2 3 52 Lighting: Explosionproof — Floodlight 2.95"/ 74.9 mm 18.63"/ 473.2 mm / .0" m 12 .8 m 4 30 11.5"/ 292.1 mm 5.00"/ 127 mm Dia. 508 20"/ mm R 11.50"/ 292.1 mm 7.13"/ 181.1 mm 53.0"/1346.2 mm Min. 1.75"/ 44.5 mm 3.50"/ 88.9 mm 2.94"/ 74.7 mm Dia. 2.00"/ 50.8 mm 13.0"/ 330.2 mm Weights 150 W 175 W 250 W 320 W 350 W 400 W 46 lb/21 kg 46 lb/21 kg 70 lb/32 kg 70 lb/32 kg 70 lb/32 kg 70 lb/32 kg Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting V CSA Certification only. 1295 Code•Master 2™ HID Factory Sealed Floodlight Photometric Data Marine (Outside Type). Explosionproof Typical Footcandle Values for Iso-Footcandle Curves. Data Based on 400 W HPS (50,000 Lumens) Clear Mogul Base Lamps. 400 W HPS Floodlight at 45° Angle with High Bay Reflector * Lighting: Explosionproof — Floodlight Distance in terms of mounting height 400W MH Floodlight at 45° Angle with High Bay Reflector Mounting Height (feet) 15 FOOTCANDLE VALUES FOR ISO-FOOTCANDLE CURVES A 52.52 B 43.34 C D 31.00 17.05 E 10.23 F G H I Mounting Height (feet) 4.77 2.43 1.36 0.84 15 A B 33.97 22.10 C 16.12 D E F G H I 9.69 6.40 4.12 2.13 1.13 .67 2.31 1.20 .64 .38 .77 .41 .24 20 29.54 24.38 17.44 9.59 5.75 2.68 1.37 0.77 0.47 20 19.11 12.43 9.07 5.45 3.60 25 18.91 15.60 11.16 6.14 3.68 1.72 0.87 0.49 0.30 25 12.23 7.96 5.80 3.49 2.30 1.48 30 13.13 10.84 7.75 4.26 2.56 1.19 0.61 0.34 0.31 30 8.49 5.52 4.03 2.42 1.60 1.03 .53 .28 .17 35 9.65 7.96 5.69 3.13 1.88 0.88 0.45 0.25 0.15 35 6.24 4.06 2.96 1.78 1.18 .76 .39 .21 .12 40 7.39 6.10 4.36 2.40 1.44 0.67 0.34 0.19 0.12 40 4.78 3.11 2.27 1.36 .90 .58 .30 .16 .10 45° 45° MH MH 1.0MH Lighting FOOTCANDLE VALUES FOR ISO-FOOTCANDLE CURVES 1.0MH * For 250 Watt HPS Clear, 30,000 Lumen lamp, multiply all FTC values by 0.60 1296 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFL Series HID and Quartz Floodlights V cCSAus. Explosionproof Class I, Zone 1 & 2 Ex de IIB T1/T2/T3 Class I, Zone 1 & 2, AEx de IIB T1/T2/T3 IP66 / 67 Applications • Designed for large area lighting in industrial outdoor and indoor explosionproof areas. • Ideal for use in Zone 1 and 2 applications in the oil and gas industry in such areas as refineries, pipelines and offshore drilling rigs. Features • Fast and easy tubular lamp replacement via threaded entry at the end of the fixture. Suitable for HPS and HPI-T MH lamps only. Other lamps require lens cover removal for servicing. • Lamp holder can be easily field adjusted for either a narrow or wide beam type. • Thermally separated ballast provides for extended life. • Easy, efficient wiring process due to a separate Ex-e terminal chamber. • Choice of mounting with a galvanized yoke bracket, fixed horizontal brackets, two different sizes of tube/pole mount brackets or without brackets for custom installation. • Tempered safety glass lens is factory sealed into the cover frame. • Suitable for use in up to 131 °F/55 °C ambient temperatures. • 2 – M20 threaded cable entries for ease of wiring. Supplied c/w one close-up plug and one Ex-e non-armored cable gland. • One external 4mm2 and one 6mm2 earth/ground terminals. • Universal mounting for vertical or horizontal positioning. • Reversible hinge allows for fixture access from either side. • Mogul Base Lamp is supplied as standard. Optional export version would be supplied with E40 export socket. • Highly polished internal Aluminium reflector. Options • Overhead diffuser. Black painted, galvanized steel. Suffix –D. • Protective wire guard. Zinc plated steel. Suffix –G. • Hot Restrike Igniter. Ignites a hot lamp shortly after a power dip or outage extinguishes the lamp. Suffix –R. • Safety Starter. Shuts off device in the event of a lamp failure. Suffix –S. • Additional wiring terminals. For 3 Phase loop in/out. Suffix –T. Certifications and Compliances • cCSAus: LR25428 Standard Materials • • • • Housing and door: copperfree marine grade aluminum alloy Lens: tempered safety glass Reflector: highly polished aluminium Closure bolts: 316 stainless steel Standard Finishes • Exterior finish: Housing and door: gray polyester epoxy. EFL H EFL Series: Explosionproof Floodlights 40 Wattage: 10 - 1000W Quartz Halogen 15 - 150W HPS/MH 17 - 175W MH/PSMH 20 - 200W PSMH 25 - 250W HPS/MH 40 - 400W HPS/MH 50 - 500W Quartz Halogen Lamp Type: H - Metal Halide/ Mercury Vapor L - High Pressure Sodium P - Pulse Start Metal Halide Q - Halogen B TT L HID Ballast Type & Voltage TT - CWA for 120/277/347V MT - CWA for 120/208/240/277V XP - CWA for 120/220-240V 50 Hz C5 - CWI for 480V C6 - CWI for 600V A1 - No Ballast - Quartz Only Mounting: Accessory Options: B - Galvanized Yoke Bracket (Std. Offering) D - Overhead Diffuser H - Set of Horizontal Fittings G - Protective Wire Guard C1 - Clamp Bracket. For 1-1/4” – 1-1/2” Tube L - Lamp Included (HIDOnly) C2 - Clamp Bracket. For 2” Tube R - Protected Hot R Strike N - No Mounting Hardware Supplied S - Safety Starter (not required with R) Lighting V cCSAus Certification. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Explosionproof — Floodlight Catalog Numbering Guide 1297 EFL Series HID and Quartz Floodlights V cCSAus. Explosionproof Class I, Zone 1 & 2 Ex de IIB T1/T2/T3 Class I, Zone 1 & 2, AEx de IIB T1/T2/T3 IP66 / 67 T Code T Code 104 °F/40 °C 131 °F/55 °C Input Voltages Fixture Wt. Vol. Catalog Number 150 W T3 T3 120/277/347 V 60Hz 60 3 EFLH15B-TTCN * 250 W T3 T3 120/277/347 V 60Hz 62 3 EFLH25B-TTCN 400 W T3 T3 120/277/347 V 60Hz 66 3 EFLH40B-TTCN 175 W T3 T3 120/277/347 V 60Hz 62 3 EFLP17B-TTCN * 200 W T3 T3 120/277/347 V 60Hz 62 3 EFLP20B-TTCN * 250 W T3 T3 120/277/347 V 60Hz 25 3 EFLP25B-TTCN * 400 W T3 T3 120/277/347 V 60Hz 66 3 EFLP40B-TTCN * 150 W T3 T3 120/277/347 V 60Hz 60 3 EFLL15B-TTCN 250 W T3 T3 120/277/347 V 60Hz 62 3 EFLL25B-TTCN 400 W T3 T3 120/277/347 V 60Hz 66 3 EFLL40B-TTCN Lamp sockets rated 125-250 Vac 71 3 EFLQ50B-A1CN 71 3 EFLQ10B-A1CN Fixture Ordering Supplied Std. w/ Yoke Mtg. Metal Halide/Mercury Vapor Pulse Start Metal Halide High Pressure Sodium Tubular Quartz Halogen 500 W T1 T1 1000 W T1 T1 Voltages — Add Suffix Below to Catalog Number Volts 120 208 220 240 277 347 480 CWA -MT -MT - -MT -MT - CWI -C1 -C2 - -C3 - -C5 -C6 50 Hz CWA -XP - -XP -XP - - - -A6 600 ‡ -C7 Lighting: Explosionproof — Floodlight Accessories and Replacement Parts Size In/mm Catalog Number Galvanized Steel Hinged Bracket Catalog Number Clip on Diffuser PNTB1 Pole Mounting Brackets PND1 Protective Guard 1-1/4” to 1-1/2”/ 31.8 mm to 38.1 mm PNPB115 2”/50.8 mm PNPB120 PNG1 Horizontal Fixed Mounting Bracket Lighting PNHB1 * Depending on availability of tubular type lamps, may require removal of lens cover for servicing. ‡ Supplied as export voltage only. Not suitable for CEC applications V cCSAus Certification. 1298 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFL Series HID and Quartz Floodlight Dimensions and Photometric Data V cCSAus. Explosionproof Dimensions in Inches/Millimeters 6.25”/ 158.8 mm 16.77”/426.0 mm 13.45”/341.6 mm 28.54”/724.9 mm Photometric Data Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 250W halide Narrow Beam Efficiency 68.3% NF C 71-121: 0,68B 250W halide Wide Beam Efficiency 67.9% NF C 71-121: 0,68C Candela Distribution 0-180 90-270 505 505 515 499 150° 120° 512 469 501 403 476 312 453 248 427 190 394 146 368 117 290 97 160 12 51 7 15° 34 4 0° 15 4 6 4 400W halide Narrow Beam Efficiency 49.3% NF C 71-121: 0,49C Candela Distribution 105° 90° 75° 60° 45° 30° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 301 301 303 318 150° 120° 299 342 294 387 287 382 286 306 271 237 231 208 172 186 133 140 83 104 48 18 15° 34 8 0° 23 6 6 6 400W halide Wide Beam Efficiency 46.7% NF C 71-121: 0,46C Candela Distribution 105° 90° 75° 60° 45° 30° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 217 217 210 219 150° 120° 218 231 223 205 238 193 255 148 266 132 263 130 244 116 201 104 136 37 85 15 15° 51 8 0° 28 6 5 4 Candela Distribution 105° 90° 75° 60° 45° 30° 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 0-180 90-270 105 105 104 106 150° 120° 108 130 124 165 148 177 167 183 165 147 142 127 116 113 74 115 52 103 48 40 15° 44 13 0° 34 9 18 6 105° 90° 75° 60° 45° 30° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting * 400 W MH: Efficiency rate lower than 250 W due to thermal deflector between glass and lamp, requested for T3. V cCSAus Certification. Lighting: Explosionproof — Floodlight 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Longitudinal Transverse 1299 PB, PC & PL Series Floodlights – Flameproof Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IECEx IP66 or IP66/67 - IK10 Applications • Designed for large area lighting in industrial outdoor and indoor hazardous areas. • Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industrysuch as: refineries, pipelines, warehouses, offshore platforms and drilling rigs. Type PB Lighting: Explosionproof — Floodlight Features • Gray epoxy painted light marine grade aluminum housing and door. • Fast and easy lamp replacement via threaded cover on the side of the fixture (Types PB and PC). The cover is fitted with a short safety chain. • Lampholder can be easily field-adjustable for either a narrow or wide beam. • Fixtures operate safely in high ambient temperatures up to +131°F/55°C and in low ambient temperature up to -40 °F/40 ºC (-13 °F/-25 ºC for PC type and -40 °F/-40 ºC for PL type). • Electrical components (ballast, ignitor and capacitor) are thermally separated from the lighting compartment with a bulkhead (Type PB) or with an insulating protection (Types PC and PL), providing extended life. • Easy and efficient wiring due to separate Ex e terminal box with wiring onto 2 captive terminals 2 x .009 in²/6 mm2; 2 internal earth terminals capacity .009 in2/6 mm2 and 1 external earth terminal capacity .006" in²/4 mm2. • 2 x .79"/20 mm clearance holes throughwire cable entries supplied with: — One Ex e unarmored cable gland (sealing dia. .26" to .57"/6.5" to 14.5 mm) — One blanking plug — Two M20 locknuts. • For use with either tubular or ellipsoidal shape lamps. See ordering information for details. • Choice of mounting with galvanized hinged bracket fixed mounting or tube/pole mounting with galvanized brackets. • Toughened glass factory-sealed into the floodlight body (Types PC and PL) or factory-sealed into the cover frame (Type PL). • Operates in any position (except Type PL, to be used only for wall-mounting or down lighting applications). • Reversible hinge allows for fixture access from either side. • E40 or H3 lampholders for the 2 x 70 W Vac/Vdc halogen version. • Internal symmetric reflector. Standard Materials • Housing and door: copperfree marine-grade aluminum alloy • Lens: toughened safety glass • Reflector: bright highly polished aluminum • Bolts: stainless steel bolt • Cable gland and blanking plug: polyamide • Locknut: nickel plated brass Standard Finishes • Housing and door: gray epoxy powder paint Type PC • Screwed-on overhead diffuser out of galvanized steel with black painting (see accessories). • Screwed-on zinc-coated protection guard for Types PB and PC (see accessories). • 1000 W HP Sodium (Type PL) with separate Ex d housing for ballast. Certifications and Compliances • • • • • • • • • • • • • • Certification Type: PJd Zone 1 - 2 — Conforming to ATEX 94/9/CE: CE 0081 II 2 G — ATEX/IEC Protection: Ex de IIB (Type PB et PL) Ex de IIC (Type PC) — T Rating: See Tables Zone 21 - 22 — Conforming to ATEX 94/9/CE: CE 0081 II 2 D — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: See tables Ambient Temperature: -4 °F/-20 °C ≤ Ta ≤ +131 °F/55 °C (Type PB and PC) (-13 °F/-25 °C for PC Type as an option) -40 °F/-40 °C ≤ Ta ≤ +131 °F/55 °C (Type PL) CE Declaration of Conformity: 50207 ATEX Certificate: LCIE 99/ ATEX 6002 IECEx Certificate: IECEx LCI 04.0020 Other Certifications: GOST Index of Protection (solid & liquid): IP66 (Type PB) IP66/67 (Types PC and PL) Impact Resistance (shock): IK10 Ex Standards EN / IEC 60079-0; 60079-1; 60079-7; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1 EMC Standards: EN / IEC 55015; 61547 Other Standards: EN / IEC 60529 (IP); 62262 (IK) North American CEC/NEC Certification: • • • AEx/Ex de IIB IP 66 (Type PB only) cCSAus Ex de IIB IP 66 (Type PB only). 175 W Metal Halide and Pulse Start Metal Halide. Safety starter. Lighting Options: • Other voltages, please contact your sales representative. • Terminal block with 2 more terminals for wiring with 3 phases plus Neutral in 380/415 V (loop in/loop out wiring possible): add suffix -T at the end of the catalog number. 1300 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PB, PC & PL Series Floodlights – Flameproof Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IECEx IP66 or IP66/67 - IK10 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide PB A H Series: PB - IIB PC - IIC PL - IIB Low Temperature Rating ➍ 15 Lamp Type: H - Metal Halide L - Sodium M - Mercury Vapor Z - Halogen Zone 1, 2, 21 and 22 ATEX/IEC Certified XJ B Voltage: XJ - 230/240 Vac 50 Hz (Magnetic Ballast) XC - 230 Vac 50 Hz (Magnetic Ballast) ➋ XA - 220 Vac 50 Hz (Magnetic Ballast) ➋ BT - 24 Vac/Vdc ➊ Lamp Power: 70 - 2 x 70 W Halogen ➊ 15 - 150 W 25 - 250 W 40 - 400 W 50 - 500 or 1000 W Halogen 60 - 600 W ➎ 1K - 1000 W ➏ Options: B - Hinged Bracket Included T - Extra Terminals ➌ C - -25°C Ambient Temperature ➐ Temperature Rating Chart: Types PB - PC Lamp Wattage 2 x 70 W - H3 ➊ 150 W Sodium 250 W Sodium 250 W Metal Halide 250 W Mercury Vapor 400 W Sodium 400 W Metal Halide 400 W Mercury Vapor 600 W Sodium 500 W Halogen 1000 W Halogen Gas Temperature Rating According to Ta +104°F/40°C +122°F/50°C +131°F/55°C T4 T4 T3 T3 T3 T3 T3 T3 T2 T2 T1 T4 T3 T3 T3 T3 T3 T3 T3 T2 T2 T1 T4 T3 T3 T3 T3 T3 T3 T3 T2 T2 T1 Dust Surface Temperature °F/°C 266/130 293/145 383/195 387/197 381/194 372/189 379/193 383/195 495/257 513/267 712/378 Lamp Wattage 150 W Sodium 250 W Sodium 250 W Metal Halide 250 W Mercury Vapor 400 W Sodium 400 W Metal Halide 400 W Mercury Vapor 600 W Sodium 500 W Halogen 1000 W Halogen Gas Temperature Rating According to Ta +104°F/40°C +122°F/50°C +131°F/55°C T4 T3 T3 T4 T3 T3 T3 T3 T3 T3 T3 T3 T4 T3 T3 T3 T3 T3 T3 T3 T3 T2 T2 T2 T2 T2 T2 T1 T1 T1 Lighting: Explosionproof — Floodlight Temperature Rating Chart: Types PL Dust Surface Temperature °F/°C 293/145 293/145 387/197 381/194 291/144 379/193 383/195 495/257 513/267 712/378 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting ➊ Only for IIB Version - 2 x 70 W Halogen 24 Vac/Vdc. ➋ Only for IIB Low Temperature Rating Version Type PL. ➌ 3 Phase + Neutral. ➍ Only for 250 W and 400 W Versions. ➎ Only Sodium for PC Series (IIC). ➏ Only Sodium for PL Series + Seperate Gear Box. ➐ Only IIC Version. 1301 PB, PC & PL Series Floodlights – Flameproof Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IECEx IP66 or IP66/67 - IK10 Lamp Wattages Lampholder Voltage (+/-10%) Lamp Type Ellipsoidal Tubular Weight lbs/kgs Volume in³/dm³ Catalog Number Ex de IIB Floodlight - PB Series High Pressure Sodium 150 W E40 230/240 V 50 Hz x x 65/29.3 4847/79.4 PBAL15XJB 250 W E40 230/240 V 50 Hz x x 67/30.3 4847/79.4 PBAL25XJB 400 W E40 230/240 V 50 Hz – x 70/31.8 4847/79.4 PBAL40XJB Mercury Vapor 250 W E40 230/240 V 50 Hz x x 65/29.3 4847/79.4 PBAM25XJB 400 W E40 230/240 V 50 Hz – x 66/29.8 484779.4 PBAM40XJB Metal Halide 250 W E40 230/240 V 50 Hz x x 67/30.3 4847/79.4 PBAH25XJB 400 W E40 230/240 V 50 Hz – x 70/31.8 4847/79.4 PBAH40XJB – x 58/26.3 4847/79.4 PBAZ50B 24 Vac/Vdc 50 Hz – – 60/27.3 4847/79.4 PBAZ70BTB * Halogen 500/1000 W E40 2 x 70 W H3 Ex de IIC Floodlight - PC Series High Pressure Sodium 150 W E40 230/240 V 50 Hz x x 64/29.0 6374/104.4 PCAL15XJB 250 W E40 230/240 V 50 Hz x x 66/30.0 6374/104.4 PCAL25XJB 400 W E40 230/240 V 50 Hz – x 71/32.0 6374/104.4 PCAL40XJB 600 W E40 230/240 V 50 Hz – x 77/35.0 6374/104.4 PCAL60XJB 250 W E40 230/240 V 50 Hz x x 66/30.0 6374/104.4 PCAM25XJB 400 W E40 230/240 V 50 Hz – x 67/30.5 6374/104.4 PCAM40XJB Mercury Vapor Lighting Lighting: Explosionproof — Floodlight Metal Halide 250 W E40 230/240 V 50 Hz x x 66/30.0 6374/104.4 PCAH25XJB 400 W E40 230/240 V 50 Hz – x 71/32.0 6374/104.4 PCAH40XJB – x 60/27.0 6374/104.4 PCAZ50B Halogen 500/1000 W E40 Ex de IIB Floodlight - PL Series High Pressure Sodium 250 W E40 230/240 V 50 Hz x x 83/37.5 6374/104.4 PLAL25XJB 400 W E40 220 V 50 Hz x x 83/37.5 6374/104.4 PLAL40XAB – x 75/34.0 6374/104.4 PLAZ50B Halogen 500/1000 W E40 Note : Floodlights supplied with hinged mounting bracket, 1 plug, 1 M20 cable gland (dia. 0.26” to 0.57”/6.5 to 14.5 mm). Lamps are not included. * Supplied with 2 x 70 W H3 bulbs, 24 Vac/Vdc 1302 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PB, PC & PL Series Accessories and Spare Parts Floodlights – Flameproof Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IECEx IP66 or IP66/67 - IK10 Type Catalog Number Galvanized Steel Hinged Brackets Type PB PBHBG Type PL PLHBG Type PC PCHBG Pole/Tube Mounting Galvanized Steel Brackets Type PB/PL Type PC 1-1/4" to 1-1/2" PNHC49G 2" PNHC60G 1-1/4" to 1-1/2" PCHC49G 2" PCHC60G Flat Surface Mounting Galvanized Steel Brackets Type PB/PL PNSBG Type PC PCSBG Tubular LM400E40 Type PB PBGDG Type PC PCGDG Type PB PBPGZ Type PC PCPGZ Type PC only PCVG 400 W Mercury Vapor Lamp Screwed-on Overhead Diffuser Screwed-on Protective Guard Lighting: Explosionproof — Floodlight Visor (secured with 2 screws) Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1303 PB, PC & PL Series Dimensions Floodlights – Flameproof Type PB Type PC Hinged Bracket Mounting Hinged Bracket Mounting 16.40"/ 416.5 mm 5.91"/ 150 mm 10.43"/ 265 mm 5.91"/ 150 mm 29.53"/ 750 mm 16.77"/ 426 mm 6.22"/ 158 mm 8.58"/ 218 mm 11.81"/ 300 mm Flat Surface Mounting 13.43"/ 341 mm 14.763"/ 375 mm 1.97"/ 50 mm Flat Surface Mounting Pole Mounting 25.75"/ 654 mm 13.66"/ 347 mm Pole Mounting Flat Surface Mounting Quick access to lamp 9.84"/ 250 mm 14.90"/378.5 mm Quick access to component with threaded cover 13.92"/353.5 mm 1.97"/ 50 mm 4 x Ø0.49"/ 12.5 mm 15.95"/396 mm 23.11"/587 mm 15.55"/395 mm Pole Mounting Lighting Lighting: Explosionproof — Floodlight Type PL Hinged Bracket Mounting 1304 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 PB, PC & PL Series Photometric Data Floodlights – Flameproof Longitudinal Transverse Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 Narrow beam Metal Halide 250 W Efficiency 68.3% NF C 71-121: 0.68B Narrow beam Metal Halide 400 W Efficiency 49.3% NF C 71-121: 0.49C Candela Distribution Candela Distribution 0-180 90-270 0-180 90-270 0 505 505 5 515 499 Degrees 10 512 469 15 501 403 20 476 312 25 453 248 30 427 190 35 394 146 40 368 117 45 290 97 50 160 12 55 51 7 60 34 4 65 15 4 70 6 4 0 217 105° 5 90° 10 210 219 Degrees 150° 120° 75° 60° 45° 30° 0° 15° Wide beam Metal Halide 250 W Efficiency 67.9% NF C 71-121: 0.68C 231 15 223 205 20 238 193 25 255 148 30 266 132 35 263 130 40 244 116 45 201 104 50 136 37 55 85 15 60 51 8 65 28 6 70 5 4 0-180 90-270 0 417 105° 5 406 418 Degrees 90° 10 419 399 15 419 330 20 408 266 25 398 218 30 371 177 35 344 142 40 295 115 45 213 98 50 135 12 55 68 7 60 34 4 65 16 3 70 5 3 150° 120° 75° 60° 45° 30° 0° 15° 150° 120° 105° 90° 75° 60° 45° 30° 0° 15° Candela Distribution 0-180 90-270 0 105 105 Degrees 5 104 106 10 108 130 15 124 165 20 148 177 25 167 183 30 165 147 35 142 127 40 116 113 45 74 115 50 52 103 55 48 40 60 44 13 65 34 9 70 18 6 417 150° 120° 105° 90° 75° 60° 45° 30° 0° 15° Wide beam Halogen 1000 W Efficiency 57.7% NF C 71-121: 0.57C 150° 120° 105° 90° 75° 60° 45° 30° 0° 15° Candela Distribution 0-180 90-270 0 251 251 Degrees 5 244 255 10 247 272 15 245 293 20 237 306 25 229 262 30 213 213 35 194 188 40 163 161 45 120 133 50 82 105 55 52 18 60 35 8 65 20 5 70 8 5 150° 120° 105° 90° 75° 60° 45° 30° 0° Lighting: Explosionproof — Floodlight 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 218 Candela Distribution Wide beam Metal Halide 400 W Efficiency 46.7% NF C 71-121: 0.46C Candela Distribution 0-180 90-270 301 301 Degrees 303 318 299 342 294 387 287 382 286 306 271 237 231 208 172 186 133 140 83 104 48 18 34 8 23 6 6 6 217 Narrow beam Halogen 1000 W Efficiency 59.2% NF C 71-121: 0.59B 15° Lighting * 400 W Metal Halide: Efficiency rate lower than 250 W due to thermal deflector between glass and lamp, requested for T3. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1305 Explosionproof Floodlights 150 W, 300 W Reflector Incandescent For 150 W PAR-38 or R-40 reflector lamps: Class I, Groups C, D For 300 W R-40 reflector lamps: Class I, Group D Applications • Class I, Groups C and D locations such as aircraft service areas, oil and gas loading docks, distilleries. Features • Floodlights feature rugged, lightweight cast aluminum construction and are factory wired and sealed — no external seals are required. Choice of lamp types provides various distribution patterns. Use medium base 150W PAR-38, R-40 or 300W R40 reflector lamps. • Easy to carry, portable model with wheelbase has handle for convenient carrying, built-on wrench allowing 135° vertical adjustment. Weighs 19 lbs/8.6 kgs. • External cable on portable wheelbase unit (not furnished) should be 3-conductor No. 16 A.W.G. type S or SO rubber covered cable. Service end of cord should be equipped with a 2-wire, 3-pole explosionproof plug for connecting to an explosionproof receptacle. • Terminal block has pressure terminal for connecting rubber covered cable to floodlight. Cable Connector takes a .375” to .500”/9.5 to 12.7 mm outside diameter cord. Sizes up to .625”/15.9 mm diameter are available on special order. • Permanent base model has explosionproof junction wiring chamber with 3/4”/19.1 mm horizontal feed-thru hubs. Vertical adjustment to 135°; horizontal to 345°. GEFWB-30 Standard Materials • Housing: cast aluminum • Yoke: high-strength aluminum alloy • Lens: thermal shock and impact resistant glass Standard Finishes • Floodlight housing, wheelbase, yoke and wiring compartment: aluminum enamel finished Certifications and Compliances Lighting Lighting: Explosionproof — Floodlight • UL Standard: UL 1598, UL 844 • UL Listed: E10794 • Copperfree aluminum alloy and stainless steel construction withstands 500 hours of salt-spray test. Per MIL-F-8115C GEFJB-30 EF Series Explosionproof Floodlights For 150W incandescent medium base PAR-38 (T3C) projector spot or flood, or 150W or 300W incandescent medium base R-40 (T2C) reflector spot or flood Description Catalog Number Portable Flood with Wheelbase and Handle. Accommodates .375”—.500”/9.5 mm cable. G-EFWB-30 Permanent Base Floodlight, for .314”/8.0 mm conduit G-EFJB-30 † † Can be furnished to accommodate cable sizes to .625”/15.9mm Dia. on special order. Cable must be ordered separately. 1306 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Explosionproof Floodlight Dimensions 150 W, 300 W Reflector Incandescent Dimensions in Inches/Millimeters Wheelbase Floodlight (GEFWB-30) Permanent Base Floodlight (GEFJB-30) 13.19"/ 335.0 mm 10.5"/ 266.7 mm 16.75"/425.5 mm 17.5"/444.5 mm .75"/19.1 mm Hub each side 12"/ 304.8 mm 3.25"/ 82.6 mm 4.75"/120.7 mm 5.63"/143.0 mm Lighting: Explosionproof — Floodlight 2.75"/ 69.9 mm G-EFJB-30 Base Dimensions Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1307 Code•Master™ Factory Sealed Strobe Luminaires Lighting: Explosionproof — Visual Signal Lighting Explosionproof, Dust-Ignitionproof Class I, Division 1 and 2, Groups C, D Class I, Division 2, Groups A, B Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X Suitable for Wet Locations Marine Outside Type (Saltwater) Applications • Code•Master Explosionproof Strobe fixtures are designed to provide safe operation in the presence of hazardous gases, vapors or dusts, defined by the National Electrical Code as Class I, Groups C and D; and Class II, Groups E, F and G. • For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. • Also used in areas where audible signals cannot be heard, to warn of unsafe conditions and for other communication needs. Features • • • • • • • • • • • • • • • Fixtures operate safely in high ambient temperatures. Minimum operating temperature is -13 °F/-25 °C. Available for fire alarm hearing impaired. 65 flashes per minute. Fixtures are complete with lamp. Patented “wireless” design. Threading of fixture unit onto mounting hood makes electrical connection. The only wiring required is attaching two wires to connection block in mounting hood. Connection block is easily wired: (a) loosen two screws, (b) make wire connections; and (c) re-position connection block. Safe, easy servicing without disconnecting any wiring. “Wireless” fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a “stand by” unit. Acme double lead threads speed installation and fixture removal from mounting hood. Only half as many turns are required as for single lead threads. The threads do not stick or gall, eliminating problems often encountered with single lead threads during fixture unit removal. All threaded joints are flame-tight. Factory installed lens available in five colors: red, amber, blue, green and clear (factory installed). Factory sealed. External seals are not required. Heat- and impact-resistant globes have smooth dust-resistant exterior. Fixture is suitable for mounting globe up or globe down utilizing pendant, ceiling or wall bracket type mounts. Optional guards protect globes from damage. Fixture (shown with optional guard) are suitable for mounting in any position including globe up or globe down utilizing pendant, ceiling or wall-bracket type mounts. Standard Materials • Fixture housing, mounting hoods and guards: copperfree (4/10 of 1% max.) aluminum • Globes: prismatic glass • Screws: Stainless steel (3) Standard Finishes • Fixture housing, guards and mounting hoods: epoxy power coat finish, electrostatically applied for complete, uniform corrosion protection Certifications and Compliances • • • • UL Listed: E212210 UL Standard: 1203 UL Standard: 1638 Visual Signaling Appliances UL Standard: 1971 Visual Signaling Equipment has been investigated for fire protective signaling services to alert hearing impaired persons. This signaling equipment is intended to be used in conjunction with Listed compatible units and devices. Visual signaling equipment Listed in this category is intended to be used in the “Public Operating Mode” as defined in NFPA 72 1308 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof Lighting Class I, Division 1 and 2, Groups C, D Class I, Division 2, Groups A, B Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X Suitable for Wet Locations Marine Outside Type (Saltwater) Catalog Numbering Guide CS S P Series: CS - Code•Master Signal 75 120AC Mounting Hood: P - Pendant B - Wall bracket C - Ceiling Type: S - Strobe CL P Voltage Current: 120 AC - 120 Vac 240 AC - 240 Vac 250 DC - 250 Vdc 2030 DC - 20-30 Vdc ➊ 24 DC - 24 Vdc ➌ Hub Size: 75 – 3/4” Options: P - Hearing Impaired (UL1971) (Strobe Only) G - Guard Globe: CL - Clear AM - Amber ➋ BL - Blue ➋ GR - Green ➋ RE - Red ➋ Thermal Suitability of Code-Master Strobe Fixture Ambient Temp. °F/°C Class I, Division 1 and 2 Groups C & D Class I, Division 2 Groups A & B Class II, Division 1 & 2 Class III 104/40 T6 T2B T4A 131/55 T6 T2B T4A 149/65 T6 T2A T4 Operating Temperatures “T” Numbers Represent the Maximum Internal Temperature for Class I, Division 2 Locations; Maximum Surface Temperature for Class I, Division 1 Locations; and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code. ➊ UL1971: Hearing-Impaired Strobe Only ➋ Not for use with UL1971 Strobe ➌ Diode Polarized (Current limiter supplied as standard). Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1309 Lighting: Explosionproof — Visual Signal Ordering Information Order using catalog numbering guide below or select catalog number from tables on following pages. Code•Master™ Factory Sealed Strobe Luminaires Lighting: Explosionproof — Visual Signal Lighting Explosionproof, Dust-Ignitionproof Class I, Division 1 and 2, Groups C, D Class I, Division 2, Groups A, B Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X Suitable for Wet Locations Marine Outside Type (Saltwater) Standard Strobes Volts Catalog Number ➊➌ Pendant — One Hub 3/4” NPT, Rigid Conduit 120 Vac CSSP75120ACCL 240 Vac CSSP75240ACCL 250 Vdc CSSP75250DCCL 24 Vdc CSSP7524DCCL ➋ 120 Vac CSSC75120ACCL 240 Vac CSSC75240ACCL 250 Vdc CSSC75250DCCL 24 Vdc CSSC7524DCCL ➋ 120 Vac CSSB75120ACCL 240 Vac CSSB75240ACCL 250 Vdc CSSB75250DCCL 24 Vdc CSSB7524DCCL ➋ 120 Vac CSST120ACCL 240 Vac CSST240ACCL 250 Vdc CSST250DCCL 24 Vdc CSST24PDCCL ➋ Ceiling — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit Bracket — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit Fixture Unit Only — Less Mounting Hood 10.3 lb/4.7 kg Weight Hub Size (Inches) Catalog Number 3/4 CAP75 Pendant Mounting Hood — One Hub 3/4” NPT, Rigid Conduit 2.0 lb/9.0 kg Ceiling Mounting Hood — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit 4.0 lb/1.8 kg 3/4 CAC75 Bracket Mounting Hood — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit 6.0 lb/2.7 kg 3/4 CALB75 ➊ Add -G suffix for optional guard. ➋ Diode polarized (current limiter supplied as standard). ➌ Catalog numbers shown are supplied with clear lens. To order colored lens, replace last digits of catalog number CL with AM for amber; BL for blue; GR for green; and RE for red. 1310 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof Lighting Class I, Division 1 and 2, Groups C, D Class I, Division 2, Groups A, B Class II, Division 1 and 2, Groups E, F, G Class III NEMA 3R, 4X Suitable for Wet Locations Marine Outside Type (Saltwater) Type Mounting Volts Catalog Number — UL1971: Hearing-Impaired ➊ 20-30 Vdc CSSP752030DCCLP 20-30 Vdc CSSC752030DCCLP 20-30 Vdc CSSB752030DCCLP 10.3 lb/4.7 kg 20-30 Vdc CSST2030PDCCL Weight Hub Size (Inches) Pendant — One Hub 3/4” NPT, Rigid Conduit Ceiling — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit Fixture Unit Only — Less Mounting Hood Fixture Unit Only — Less Mounting Hood Catalog Number — UL1971: Hearing-Impaired Pendant Mounting Hood — One Hub 3/4” NPT, Rigid Conduit 2.0 lb/9.0 kg 3/4 CAP75-1971 Ceiling Mounting Hood — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit 4.0 lb/1.8 kg 3/4 CAC75-1971 Bracket Mounting Hood — Four Hubs 3/4” NPT, Three Close-Up Plugs, Rigid Conduit 6.0 lb/2.7 kg 3/4 CALB75-1971 ➊ Only clear globes are available for UL1971 applications. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1311 Lighting: Explosionproof — Visual Signal Strobes for the Hearing Impaired Code•Master™ Factory Sealed Strobe Luminaire Accessories Lighting: Explosionproof — Visual Signal Lighting Explosionproof, Dust-Ignitionproof Description Weight Lbs/Kg Catalog Number 1.0/0.5 CJGU-15 0.5/0.2 VPT-7 0.5/0.2 VPT-7P Optional Aluminum Guard Replacement Connection Block — Standard For Non-Hearing-Impaired CodeMaster Fixtures Replacement Connection Block — UL1971: Hearing-Impaired For Code-Master Fixtures for the Hearing Impaired Replacement Lamps Fixture Type Lamp Type Voltage Base Type Catalog Number Xenon All Octal Socket S865 Strobe 1312 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master™ Factory Sealed Strobe Luminaire Family Tree and Dimensions Explosionproof, Dust-Ignitionproof Lighting Ceiling Four Hubs Three Close-Up Plugs 3/4” NPT CAC75 CAC75-1971 Lighting: Explosionproof — Visual Signal Pendant One Hub — 3/4” NPT CAP75 CAP75-1971 Bracket Four Hubs Three Close-Up Plugs 3/4” NPT CALB75 CALB75-1971 Fixture Unit With Globe Strobe 120AC 240AC 250DC 20-30DC 24DC CSST120ACCL CSST240ACCL CSST250DCCL CSST2030PDCCL ➊ CSST24PDCCL ➋ Optional Aluminum Guard CJGU-15 Dimensions in Inches/Millimeters Pendant Ceiling Wall Bracket 0.41"/ 10.4 mm Dia. Hub for .75" NPT Conduit 4.00"/ 101.6 mm 4.50"/ 114.3 mm 4.00"/ 101.6 mm 3.75"/ 95.3 mm 4.50"/ 114.3 mm Dia. 5.92"/ 150.4 mm Hub for .75" NPT Conduit Four Sides 13.15"/ 334.0 mm Hub For 2.46"/ 62.5 mm 3/4” NPT 2” Wiring access 2.28"/ 57.9 mm cover both sides. 4.25"/ 108.0 mm 4.92"/ 125.0 mm Sq. 3.92"/ 99.6 mm 1.23"/ 31.2 mm 3.46"/ 87.9 mm 1.79"/ 45.5 mm 11.5"/ 292.1 mm 13.75"/ 349.3 mm 5.95"/ 151.3 mm 13.88"/ 352.6 mm 4.00"/ 101.6 mm 4.92"/ 125.0 mm 13.53"/ 343.7 mm 12.38"/ 314.5 mm 13.00"/ 13.38"/ 330.2 mm 339.9 mm 13.75"/ 349.3 mm 7.80"/ 198.1 mm 7.80"/ 198.1 mm 7.80"/ 198.1 mm ➊ UL1971: Hearing-Impaired Strobe Only ➋ Diode polarized (current limiter supplied as standard). Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1313 TCH Series Safety Flashlights Increased Safety Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IEC IP66 (TCH1) IP66/68 (TCH2) Lighting: Explosionproof — Portable Lighting Applications • To provide maintenance staff with task specific portable lighting in Zone 1 hazardous areas. • Ideal for persons requiring task specific portable lighting in refineries, oil and gas process and chemical plants. Features • Type TCH1: — Luminescent switch facilitates locating flashlight in dark. — Can be used to transmit a Morse code. — Halogen version provides twice the lumen output of incandescent lamps. — Hook for hands free operation. — Uses R20 or LR20 batteries (not included). — Supplied with 1 lamp. • Type TCH2: — Dual optics (one at the end and one on the side) permitting: - Focused beam for safe movement. - Wide angle side beam for task specific focused lighting. — Ergonomic design permits easy manipulation: User can select one of the two beams with one hand. — Two beams can be switched on separately and not simultaneously. — Should one lamp fail, the second lamp will still provide illumination. — Flashlight is stable when placed upright on a horizontal surface. — Pocket clip allows for hands free work. — Luminescent ring allows easy locating of flashlight in dark. — Suspension hook for hands free use. — Uses 2 R20 or LR20 batteries (not included). — Supplied with one halogen lamp for main beam and one incandescent lamp for side beam. — Supplied with one special opening tool. Standard Material • Type TCH1: — Housing: shockproof and antistatic polyamide — Internal reflector: polished — Lens: polycarbonate — Hardware: stainless steel — Switch: luminescent • Type TCH2: — Housing: black polycarbonate — Internal reflector: polished — Lens: polycarbonate — Hardware: stainless steel — Ring: luminescent Certifications and Compliances • Gas: Zones 1–2 — Conforming to ATEX 94/9/CE: CE 0081 II 2 G — ATEX/IEC Protection: Ex eib IIC — Certification Type TCH1 - T Rating: T4 - Ambient Temperature: -4 °C/20 °C ≤ To ≤ + 104°F/40 °C - CE Declaration of Conformity: 50259 - ATEX Certificate: LCIE 03 ATEX 6064 - IEC Certificate: LCIE Ex 03.010 - Ingress Protection (solid and liquid): IP66 1314 TCH1 TCH2 — Certification Type TCH2 - T Rating: -4 °F/20 °C ≤ To ≤ + 104 °F/40 °C: Incandescent PR6, Krypton PR102, Halogen HPR52, Halogen HPR01 = T4 +104 °F/40 °C ≤ To ≤ + 131 °F/55 °C: Incandescent PR6, Krypton PR102, Halogen HPR01 = T4 +104 °F/40 °C ≤ To ≤ + 131 °F/55 °C: Halogen HPR52 = T3 Ambient Temperature: -4° F/-20 °C ≤ To ≤ + 131 °F/55 °C - CE Declaration of Conformity: 50238 - ATEX Certificate: LCIE 02 ATEX 6229 - IEC Certificate: LCIE Ex 02.024 - Ingress Protection (solid and liquid): IP66/68 (25m) • Dust: Zone 21-22 II2 D — Conforming to ATEX 94/9/CE: CE 0081 — ATEX/IEC Protection: Ex tD A21 — Certification Type TCH1 - Surface Temperature: 203°F/95 °C - Ambient Temperature: -4°F/-20 °C ≤ To ≤ + 104°F/40 °C - CE Declaration of Conformity: 50259 - ATEX Certificate: LCIE 03 ATEX 6064 - IEC Certificate: LCIE Ex 03.010 - Ingress Protection (solid and liquid): IP66 — Certification Type TCH2 - Surface Temperature: 266° F/130 °C Ambient Temperature: -4 °F/-20 °C ≤ To ≤ + 131 °F/55 °C - CE Declaration of Conformity: 50238 - ATEX Certificate: LCIE 02 ATEX 6229 - IEC Certificate: LCIE Ex 02.024 - Ingress Protection (solid and liquid): IP66/68 (25m) • Ex Standards: EN/IEC 60079-0; 60079-7; 60079-11; 61241-0; 61241-1 • Product Standards: EN/IEC 60598-1 • Other Standards: EN/IEC 60529 (IP) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 TCH Series Safety Flashlights Increased Safety Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IEC IP66 (TCH1) IP66/68 (TCH2) Ordering Information: Number of Battery Cells Weight lbs/kgs Volume in3/dm3 1 Incandescent 2.5 V – 0.3 A 2 0.88/0.4 207.6/3.4 1 Incandescent 3.7 V – 0.3 A 3 0.88/0.4 207.6/3.4 1 Halogen 2.8 V – 0.5 A 2 0.88/0.4 207.6/3.4 2 0.88/0.4 116.0/1.9 2 Incandescent 2.5 V – 0.3 A Halogen 2.8 V – 0.5 A Catalog Number Pack TCH12C 2 TCH13C 2 TCH12H 2 TCH22M 1 Lighting: Explosionproof — Portable Type of Lamps (not included) Lighting Number of lamps (included) Spare Lamps for Replacement (Lamp Holder P13,5S) Rating Catalog Number Pack Incandescent (PR6) Type of lamp 2.5 V – 0.3 A TCHL25C 10 Incandescent (PR6) 3.7 V – 0.3 A TCHL37C 10 Halogen (HPR01) 2.8 V – 0.5 A TCHL28H 10 Dimensions in Inches/Millimeters 1.1/28.0 28 48 1.4/35.0 35 TCH13C 27 Ø2.8/72.0 72 44 Ø2.8/70.0 70 60 TCH12C/H 213 8.4/213.0 244 9.6/244.0 Ø2.4/60.0 Ø2.4/60.0 60 182 7.2/182.0 44 Ø1.7/44.0 TCH22M Photometric Data Catalog Number TCH12C (at 25 meters) Incandescent Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Catalog Number TCH13C (at 25 meters) Incandescent 1315 AHL and EHL Incandescent Factory Sealed Luminaires and Handlamps Explosionproof Suitable for use in Wet Locations. AHL Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups F ➊, G Class III EHL Class I, Division 1 and 2, Groups C, D Lighting Applications • AHL general purpose explosionproof lighting fixture – an A-51 fixture with handle assembly of hook and cable clamp. CAUTION: For safe operation, the AHL fixture weight must be supported by the hanger hook, not by the flexible cord, per the National Electrical Code. • EHL general purpose explosionproof portable handlamp. Only 5”/127 mm in diameter for ease of movement. Lighting: Explosionproof — Portable Features: • AHL and EHL – Equipped with connection block for ease of wiring and relamping. – Cable clamp diameters: AHL – .375” to .625”/9.5 mm to 15.9 mm; EHL – .406”/10.3 mm for 16-3 AWG. – Heat- and impact-resistant glass globes. • AHL – Sturdy fixture with rugged hanging hook. – Safety grounding – additional terminal furnished to connect to grounding conductor. • EHL – Portability, with phenolic handle and non-sparking guard with hook. – Easy relamping – loosen setscrew, unscrew guard, remove globe and insert lamp. – Safety grounding – remove cable and clamp and make connections to terminal (including one ground terminal) then tighten clamp. AHL EHL Standard Materials • • • • • • • Globes: heat-and impact-resistant glass AHL fixture unit, hook and guard: copperfree aluminum AHL cable clamp: brass EHL fixture body and handle: laminated phenolic EHL handle: laminated phenolic EHL hook: brass EHL guard: copperfree aluminum Standard Finishes • AHL fixture unit, guard, handle and hook: two-coat epoxy enamel • AHL cable clamp: natural finish • EHL fixture body: laminated phenolic • EHL handle: phenolic • EHL guard and hook: guard – natural finish; hook – zinc electroplate and clear chromate • EHL cable clamp: laminated phenolic Certifications and Compliances • UL Standard: UL 1598, UL 844 • EHL UL Listed: E59147 • CSA Certification: LR25428 Related Products • The EHL handlamp may be used with AE Automatic TakeUp Reelites listed in the Specialty Products section and ECC Cord Connector and Plugs and Receptacles in the Plug and Receptacles section. ➊ To reduce the risk of ignition of hazardous atmospheres, do not use where electrically conductive dusts are present (most coal dusts are not electrically conductive). 1316 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 AHL and EHL Incandescent Factory Sealed Luminaires and Handlamps Explosionproof Suitable for use in Wet Locations. AHL Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups F ➊, G Class III EHL Class I, Division 1 and 2, Groups C, D Cable Diameter (Inches) Description “T” Ratings Catalog Number AHL – Explosionproof 60 - 300 W Lighting Fixtures 60-100 W, A-21 (AAU-1N) .375 to .625 T4 AHL100 200-300 W, PS-30 (AAU-2NS) .375 to .625 T4A AHL200 Laminated Phenolic Handle. Wiring Connection Block takes from #16 to #14 Wire. 100 W, A-21 .406 T3A EHL100N EHL Replacement Globe and Guard Heat-resistant glass globe XP419 Aluminum guard with hook XP163SA Dimensions in Inches/Millimeters AHL EHL 6.50"/ 165.1 mm 7.50"/ 190.5 mm 3.31"/84.1 mm 17.63"/447.8 mm A C 4.88"/124.0 mm Dia. B Catalog Number A B C AHL100 14.25/362.0 7.06/179.3 10.94/277.9 AHL200 15.94/404.9 8.81/223.8 12.63/320.8 ➊ To reduce the risk of ignition of hazardous atmospheres, do not use where electrically conductive dusts are present (most coal dusts are not electrically conductive). ➋ Handlamp accommodates 16-3 SO cable. Contact your sales representative if 14-3 cable is required. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1317 Lighting: Explosionproof — Portable EHL – Explosionproof 100 W Portable Handlamp ➋ Lighting CAUTION: For safe operation, weight of fixture must be supported by hanger hook, not by the flexible cord, per the National Electrical Code. Code•Master 2™ Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Marine Type Electric Fixtures Outside Type (Salt Water) Suitable for use in Wet Locations NFPA101, Life Safety Code Applications • Ideal for use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other process areas where ignitable vapors, dust, moisture and corrosive elements may be present. • Suitable for use in wet locations. Lighting: Explosionproof — Emergency Lighting Features • Auxiliary (emergency) lighting should be used to provide a lighted means of egress for personnel in walkways, catwalks, stairs, doorways, tunnels, ramps and aisles. • Auxiliary (emergency) lighting should be used to provide “instant on” illumination during power failures. • Arrangement of heat-producing components results in more efficient heat dissipation for cooler fixture operation. • Safe, easy servicing without disconnecting any wiring. Patented “wireless” design means the threading of the fixture unit onto mounting hood makes electrical connection. This allows for the fixture unit to easily thread off mounting hood for convenient servicing or for immediate replacement with a “stand-by” unit. Only wiring required is attaching two wires to connection block in mounting hood. • Connection block is easily wired: (a) loosen two screws; (b) make wire connections; and (c) reposition connection block. • Acme double-lead threads speed installation and fixture removal from mounting hood – only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating the troublesome problems often encountered with single-lead threads during fixture unit removal. • All threaded joints are flame-tight. • Factory sealed. External seals not required. • Fluorescent light source reduces energy costs. • Fluorescent lamp life of 10,000 hours reduces relamping costs compared to incandescent. • Strategic location of lamp sockets in combination with the interior prism design of the glass globe provides optimum light distribution and control. • Superior corrosion resistance with epoxy powder coat finish. • Choice of mountings: pendant, ceiling, bracket and stanchion. • Fiberglass-reinforced polyester reflectors in standard dome, deep dome or 30° angle are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. The high bay aluminum reflector is designed for installations where mounting height work planes range from 20 to 30 feet/6 to 9 meters. • Optional guards protect globes from damage. Guards secure to fixture with three screws. • Fixture (52, 64 or 84 W) is available for semi-continuous operation (one AC ballast permits two-lamp illumination when power is on and one battery pack permits one-lamp illumination when AC power is interrupted). • Minimum operating temperature: 32 °F/0 °C. • Maximum operating temperature: 104 °F/ 40 ° C Battery Pack Information • Long life, high temperature, nickel-cadmium (Ni-Cad) battery. • Dual voltage (120/277 V, 60 Hz) solid state charger on open circuit board. • Five-year life expectancy. • Wiring instructions for “Push-To-Test” button are supplied with fixture. 1318 Illustrated Features • Remote “Push-To-Test” switch is available to verify emergency operation (order separately, see F3-82). • Red indicator light is provided with each battery pack to indicate when the battery is charging. Standard Materials • Ballast bodies, guards and pendant mounting hoods: copperfree (4/10 of 1% max.) aluminum • Ceiling, bracket and stanchion mounting hoods: sand-cast copperfree (4/10 of 1% max.) aluminum • Reflectors: aluminum or fiberglass reinforced polyester Standard Finishes • Ballast bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection Options • Fuse kit CF2 for field installation. Certifications and Compliances • UL Standard: UL 924, UL 844, UL 1598 • UL Listed: E165014 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Emergency PLT Factory Sealed Luminaire Technical Data Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Marine Type Electric Fixtures Outside Type (Salt Water) Suitable for use in Wet Locations NFPA101, Life Safety Code Classified Area Suitability of Code•Master 2 Emergency Series (Suitability includes use of reflector.) Lamp Type Class I, Division 1 & 2 With Globe or with Globe & Reflector UL/NEC Temp. Ident. No. Nameplate Marking Groups Class II, Division 1 & 2 With Globe or with Globe & Reflector UL/NEC Temp. Ident. No. Nameplate Marking Groups Lamps Watts Ambient Temp ˚ °F/°C 52 104/40 T6 C,D T4 E,F,G 64 104/40 T6 C,D T4 E,F,G 84 104/40 T6 C,D T4 E,F,G PLT “T” Number 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 Temp. 664Range 842 (°F) 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°˚C) 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 351450 T6 Fixture and Accessory Weights in Lbs/kg Fixture Size Fixture Weight Reflector Weight Guard Weight 52 W 45/20.4 3/1.4 2/0.9 64 W 45/20.4 3/1.4 2/0.9 84 W 45/20.4 3/1.4 2/0.9 Pendant Ceiling Bracket Stanchion 2/0.9 4/1.8 6/2.7 2/0.9 Mounting Hood Weights Lbs/kg Electrical Specification for AC Operation Catalog Number ➊ Fixture Wattage Line Voltage (V) Frequency (Hz) Type of Ballast Line Amps (A) Maximum Wattage (W/W) CMBFS5212 52 120 60 PLT Electronic 0.49 52 CMBFS5227 52 277 60 PLT Electronic 0.20 52 CMBFS6412 64 120 60 PLT Electronic 0.57 64 CMBFS6427 64 277 60 PLT Electronic 0.24 64 CMBFS8412 84 120 60 PLT Electronic 0.73 84 CMBFS8427 84 277 60 PLT Electronic 0.31 84 ➊ For optional fusing. order kit -CF2 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1319 Lighting: Explosionproof — Emergency T1 Lighting “T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. Code•Master 2™ Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Marine Type Electric Fixtures Outside Type (Salt Water) Suitable for use in Wet Locations NFPA101, Life Safety Code Lamp Watts Lamp Type 52 PLT Hub Size (Inches) Catalog Number ➋➌ 3/4 CFPS5275 Pendant 64 PLT 84 PLT 52 PLT 1 CFPS5210 3/4 CFPS6475 1 CFPS6410 3/4 CFPS8475 1 CFPS8410 3/4 CFCS5275 Lighting: Explosionproof — Emergency Lighting Ceiling 1 CFCS5210 3/4 CFCS6475 1 CFCS6410 3/4 CFCS8475 1 CFCS8410 3/4 1 3/4 1 3/4 1 CFBS5275 CFBS5210 CFBS6475 CFBS6410 CFBS8475 CFBS8410 64 PLT 84 PLT 52 PLT 64 PLT 84 PLT 52 PLT 1-1/4 or 1-1/2 ➊ CFSS52150 64 PLT 1-1/4 or 1-1/2 ➊ CFSS64150 84 PLT 1-1/4 or 1-1/2 ➊ CFSS84150 Bracket 25° Stanchion Fixture Units Ballast body with globe. Indicate voltage desired by adding voltage suffix to Fixture Unit catalog number listed below. Add Voltage Suffixes 120 V 277 V Lamp Watts Lamp Type Unit Catalog Number 52 PLT CMBFS52 12 27 64 PLT CMBFS64 12 27 84 PLT CMBFS84 12 27 ➊ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. ➋ To order fixture with guard, add suffix -G before adding voltage suffix. ➌ Add voltage suffix -12L for 120 V with lamp; or -27L for 277 V with lamp. 1320 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Emergency PLT Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. Mounting Hoods Hub Size Inches Catalog Number Pendant 3/4 CAP-75 1 CAP-100 3/4 CAC-75 1 CAC-100 3/4 CALB-75 1 CALB-100 One Hub Ceiling Four hubs, Three Close-Up Plugs Four hubs, Three Close-Up Plugs One Hub 1-1/4 or 1-1/2 ➊ CAS-150 Mounting Adapter with Connection Block Permits use of existing A-51 mounting hoods (AAC Ceiling or AALB Bracket) with the new Code•Master 2 Fixture Unit. After removing existing Fixture Unit and adapter, screw in the new CMAD-1 Adapter. Then thread thenew Fixture Unit into the CMAD-1. CMAD-1 ➊ 1-1/2” tapped hub furnished with 1-1/2” to 1-1/4” reducer. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1321 Lighting: Explosionproof — Emergency 25° Stanchion Lighting Bracket Code•Master 2™ Emergency PLT Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. Description Catalog Number Standard Dome CMR-4ST Deep Dome CMR-4DD 30˚ Angle CMR-4AN Polyester Reflectors Lighting Aluminum High Bay Reflectors CMR-4HB Lighting: Explosionproof — Emergency Prismatic Glass Globes 52, 64, 84 W PLT CGL-400 52, 64, 84 W PLT CGU4 Aluminum Guards Connection Block — For Code•Master 2 PLT Fixtures 1322 52 W - 84 W PLT32RS 52 W - 84 W VPT-7 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Emergency PLT Factory Sealed Luminaire Accessories Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. Dimensions in Inches/Millimeters Pendant Ceiling Bracket 0.41"/ 10.4 mm Dia. .390"/ 9.9 mm 4.58"/ 116.3 mm Dia. 4.92"/ 125.0 mm Sq. 4.00"/ 101.6 mm 3.91"/99.3 mm 9.86"/ 250.4 mm 9.5"/ 241.3 mm 2.28"/ 2.46"/ 62.5 mm 57.9 mm 6.10"/ 154.9 mm 4.25"/ 108.0 mm 3.46"/ 87.9 mm 1.23"/ 31.2 mm 3.92"/ 99.6 mm 4.00"/ 101.6 mm 5.92"/ 150.4 mm 25° Stanchion 1.79"/ 45.5 mm 4.5"/ 60.5 mm Dia. 2.38"/ 60.5 mm Dia. 11.5"/ 292.1 mm 13.75"/ 349.3 mm .94"/ 23.9 mm Lighting 9.86"/ 250.4 mm 9.86"/ 250.4 mm 4.00"/ 101.6 mm Pendant A 52-84 W B Ceiling C D A B Bracket C D A B 25° Stanchion C D A B 24.50/ 23.50/ 12.00/ 20.36/ 24.36/ 23.36/ 12.00/ 20.36/ 24.61/ 23.61/ 17.50/ 20.36/ 22.20/ 21.20/ 622.3 596.9 304.8 517.1 618.7 593.3 304.8 517.1 625.1 599.7 444.5 517.1 563.9 538.5 C 17.50/ 444.5 Reflector Dimensions in Inches/Millimeters Type Reflector Standard Dome Deep Dome A B C 11.20/ 284.5 5.90/ 149.9 18.70/ 475.0 10.56/ 268.2 7.00/ 177.8 Standard and Deep Dome 20.30/ 515.6 30° Angle High Bay 10.96"/ 278.4 mm 10.56"/ 268.2 mm 13.30"/ 337.8 mm 9.75”/ 347.7 mm 16.16"/ 410.5 mm 20.80"/ 528.3 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1323 Lighting: Explosionproof — Emergency 5.50"/ 139.7 mm Code•Master 2™ Emergency PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34. Total Luminaire Efficiency = 79.8% CIE Type - Semi-Direct Plane Spacing Criteria 0-180 2.88 90-270 2.88 Diagonal 2.82 REPORT NUMBER: CMBF64G 64 W (two 32 W lamps) Fluorescent Fixture with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lighting: Explosionproof — Emergency Lighting % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 Lumens 17.70 61.05 132.44 236.78 336.66 421.68 485.34 517.29 513.72 468.70 352.77 110-120 200.85 120-130 73.54 130-140 140-150 150-160 160-170 170-180 11.28 1.12 0.31 0.06 0.00 Maximum Candela = 493 Located at Horizontal Angle = 0, Vertical Angle = 70 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (70) (Through Max. Cd.) CIE Type - Direct Spacing Criteria 0-180 1.62 90-270 1.62 Diagonal 1.74 Zone 0-30 0-40 0-60 0-90 110-120 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1324 30 10 0 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 90 76 67 60 54 49 45 41 38 35 33 90 70 58 49 43 37 33 29 26 24 22 90 65 51 41 34 29 25 22 19 17 15 90 60 45 35 28 23 19 16 14 12 11 85 71 63 56 50 46 42 38 36 33 31 85 66 55 46 40 35 31 28 25 23 21 85 61 48 39 32 27 23 20 18 16 14 85 57 42 33 26 22 18 15 13 11 10 76 58 48 40 35 31 27 24 22 20 18 76 54 43 34 28 24 21 18 16 14 13 76 51 38 29 23 19 16 14 12 10 9 68 51 42 35 30 26 23 21 19 17 16 68 48 37 30 25 21 18 16 14 12 11 68 45 34 26 21 17 14 12 10 9 8 60 45 36 30 26 23 20 18 16 15 14 60 42 32 26 21 18 16 14 12 11 10 60 40 29 23 18 15 12 10 9 8 7 57 36 26 20 15 12 10 8 7 9 5 Lumens 211.19 447.97 1206.31 2722.64 % Lamp 4.4 9.3 25.1 56.7 % Fixture 5.5 11.7 31.5 71.1 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1022.32 1095.85 1108.26 1108.63 3831.28 % Lamp 21.3 22.8 23.1 23.1 79.8 % Fixture 26.7 28.6 28.6 28.9 100.0 Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lumens 73.25 220.57 368.60 505.61 603.19 638.42 497.24 226.17 57.98 1.64 0.00 120-130 130-140 140-150 150-160 160-170 170-180 50 70 REPORT NUMBER: CMBF64ST 64 W (two 32 W lamps) Fluorescent Fixture with Globe and Standard Dome Reflector * % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 70 Rw Zonal Lumen Summary Total Luminaire Efficiency = 66.5% Plane 80 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 79 72 65 59 53 49 45 41 38 35 33 79 69 59 51 45 39 35 32 29 26 24 79 66 54 45 38 33 29 25 23 20 18 79 63 50 41 34 28 24 21 19 16 15 77 70 63 57 52 47 43 40 37 34 32 77 67 58 50 44 39 34 31 28 26 24 77 64 53 45 38 33 29 25 22 20 18 77 62 49 40 33 28 24 21 18 16 15 74 64 55 48 42 37 33 30 27 25 23 74 62 52 43 37 32 28 25 22 20 18 74 60 48 40 33 28 24 21 18 16 15 71 62 53 46 40 36 32 29 26 24 22 71 60 50 42 36 31 27 24 22 19 18 71 58 47 39 32 28 24 21 18 16 15 68 59 51 44 39 35 31 28 26 23 22 68 58 48 41 35 31 27 24 21 19 17 68 56 46 38 32 27 23 20 18 16 14 66 55 45 37 30 26 22 19 17 15 13 Zonal Lumen Summary Maximum Candela = 808 Located at Horizontal Angle = 0, Vertical Angle = 35 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (35) (Through Max. Cd.) Zone 0-30 0-40 0-60 0-90 Lumens 662.42 1168.03 2409.64 3191.04 % Lamp 13.8 24.3 50.2 66.5 % Fixture 20.7 36.6 75.5 99.9 Zone Lumens 90-120 1.64 90-130 1.64 90-150 1.64 90-180 1.64 0-180 3192.68 % Lamp 0.0 0.0 0.0 0.0 66.5 % Fixture 0.1 0.1 0.1 0.1 100.0 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Code•Master 2™ Emergency PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34. Total Luminaire Efficiency = 57.4% CIE Type - Direct Plane Spacing Criteria 0-180 1.52 90-270 1.70 Diagonal 1.62 REPORT NUMBER: CMBF64AN 64 W (two 32 W lamps) Fluorescent Fixture with Globe and 30° Angle Dome Reflector * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc % Walls Lumens 62.13 187.93 317.49 428.14 471.22 454.23 384.77 276.31 157.68 13.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Maximum Candela = 731 Located at Horizontal Angle = 90, Vertical Angle = 37.5 #1 – Vertical Plane through Horizontal Angles (90-270) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (37.5) (Through Max. Cd.) CIE Type - Direct Spacing Criteria 0-180 1.44 90-270 1.44 Diagonal 1.60 Zone 0-30 0-40 0-60 0-90 110-120 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 68 61 55 50 45 41 38 35 32 30 28 68 58 49 43 37 33 30 27 24 22 20 68 55 45 37 32 28 24 21 19 17 16 68 52 41 33 28 23 20 18 16 14 12 67 59 53 48 44 40 37 34 32 29 28 67 56 48 42 37 32 29 26 24 22 20 67 54 44 37 31 27 24 21 19 17 15 67 51 40 33 27 23 20 18 15 14 12 64 54 46 40 35 31 28 25 23 21 19 64 51 43 36 31 27 23 21 19 17 15 64 49 39 32 27 23 20 17 15 14 12 61 51 44 38 34 30 27 24 22 20 19 61 49 41 35 30 26 23 20 18 16 15 61 48 39 32 27 23 20 17 15 14 12 58 49 42 37 32 29 26 24 22 20 18 58 48 40 34 29 25 22 20 18 16 15 58 46 38 31 26 22 19 17 15 13 12 57 45 36 30 25 21 18 16 14 12 11 Lumens 567.55 995.69 1921.14 2739.90 % Lamp 11.8 20.7 40.0 57.1 % Fixture 20.6 36.2 69.8 99.5 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 13.45 13.45 13.45 13.45 2753.35 % Lamp 0.3 0.3 0.3 0.3 57.4 % Fixture 0.5 0.5 0.5 0.5 100.0 Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 % Ceiling Rcc Lumens 88.95 260.61 413.34 539.82 630.36 641.74 436.60 164.84 47.37 1.92 0.00 120-130 130-140 140-150 150-160 160-170 170-180 10 30 REPORT NUMBER: CMBF64DD 64 W (two 32 W lamps) Fluorescent Fixture with Globe and Deep Dome Reflector * % Walls Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 30 50 Zonal Lumen Summary Total Luminaire Efficiency = 67.2% Plane 50 70 80 70 50 30 10 0 Rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 80 73 66 60 55 50 46 43 40 37 34 80 70 61 53 47 41 37 33 30 28 25 80 67 56 47 41 35 31 27 24 22 20 80 65 52 43 36 31 26 23 20 18 16 78 71 65 59 53 49 45 41 38 36 34 78 68 59 52 46 41 36 33 30 27 25 78 66 55 47 40 35 30 27 24 22 20 78 63 52 43 36 30 26 23 20 18 16 75 66 57 50 44 39 35 32 29 26 24 75 63 53 45 39 34 30 27 24 21 19 75 61 50 42 35 30 26 23 20 18 16 71 63 55 48 42 38 34 31 28 26 24 71 61 52 44 38 33 29 26 23 21 19 71 60 49 41 35 30 26 23 20 18 16 69 60 53 46 41 37 33 30 27 25 23 69 59 50 43 37 33 29 26 23 21 19 69 58 48 40 34 29 25 22 20 18 16 67 56 47 39 33 28 24 21 19 16 15 Zonal Lumen Summary Maximum Candela = 933 Located at Horizontal Angle = 0, Vertical Angle = 7.5 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (7.5) (Through Max. Cd.) Zone 0-30 0-40 0-60 0-90 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumens 762.91 1302.73 2574.82 3223.63 % Lamp 15.9 27.1 53.6 67.2 % Fixture 23.7 40.4 79.8 99.9 Zone 90-120 90-130 90-150 90-180 0-180 Lumens 1.92 1.92 1.92 1.92 3225.55 % Lamp 0.0 0.0 0.0 0.0 57.4 % Fixture 0.1 0.1 0.1 0.1 100.0 1325 Lighting: Explosionproof — Emergency 110-120 120-130 130-140 140-150 150-160 160-170 170-180 70 Rw Lighting Zone 0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90 90-100 100-110 80 Code•Master 2™ Emergency PLT Factory Sealed Luminaire Photometric Data Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34. Total Luminaire Efficiency = 58.9% REPORT NUMBER: CMBF64HB 64 W (two 32 W lamps) Fluorescent Fixture with Globe and High Bay Reflector * CIE Type - Direct Plane Spacing Criteria 0-180 0.82 Coefficients of Utilization - Zonal Cavity Method 90-270 0.82 Effective Floor Cavity Reflectance 0.20 Diagonal 0.92 Zone Lumens % Ceiling Rcc Lighting: Explosionproof — Emergency Lighting % Walls Rw 80 70 50 70 30 10 70 50 50 30 10 50 30 30 10 50 30 10 10 50 30 0 10 0 0 70 70 70 70 68 68 68 68 65 65 65 63 63 63 60 60 60 59 0-10 239.15 1 66 64 63 61 65 63 62 60 61 59 58 58 57 57 56 56 55 54 10-20 599.67 2 62 59 56 54 61 58 55 53 56 54 52 54 52 51 52 51 50 49 20-30 645.20 3 58 54 51 48 57 53 50 47 51 49 47 50 48 46 49 47 45 44 30-40 625.54 4 55 50 46 43 54 49 45 43 48 44 42 46 44 42 45 43 41 40 40-50 452.95 5 51 46 42 39 50 45 41 39 44 41 38 43 40 38 42 39 37 36 50-60 185.71 6 48 42 38 35 47 42 38 35 41 37 35 40 37 35 39 36 34 33 60-70 58.40 7 46 39 35 32 45 39 35 32 38 35 32 37 34 32 37 34 32 31 70-80 15.26 8 43 37 33 30 42 36 32 30 36 32 30 35 32 29 34 31 29 28 80-90 4.25 9 41 34 30 28 40 34 30 28 33 30 27 33 30 27 32 29 27 26 90-100 0.69 10 38 32 28 26 38 32 28 26 31 28 26 31 28 25 30 27 25 25 100-110 0.00 110-120 0.00 120-130 0.00 Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture 130-140 0.00 0-30 1484.03 30.9 52.5 90-120 0.69 0.0 0.0 140-150 0.00 0-40 2109.57 43.9 74.6 90-130 0.69 0.0 0.0 150-160 0.00 160-170 0.00 170-180 0.00 1326 Maximum Candela = 2540 Located at Horizontal Angle = 0, Vertical Angle = 5 #1 – Vertical Plane through Horizontal Angles (0-180) (Through Max. Cd.) #2 – Horizontal Cone through Vertical Angle (5) (Through Max. Cd.) 0-60 2748.23 57.3 97.2 90-150 0.69 0.0 0.0 0-90 2826.12 58.9 100.0 90-180 0.69 0.0 0.0 2628.80 58.9 100.0 0-180 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 ELS Series Emergency Lighting System Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications Class I, Division 1 and 2, Groups B*, C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • ELS Series features an emergency lighting power unit that is designed to provide safe operation in the presence of hazardous gases, vapors or dusts, defined by the National Electrical Code as Class I, Groups C and D, and Class II, Groups E, F and G. • Typical applications include all means of egress (such as walkways, exit ramps, stairs and aisles) for hazardous areas which include oil refineries, petrochemical facilities, pulp and paper mills, chemical storage areas, wastewater treatment facilities and grain elevators. Features Lighting Lighting: Explosionproof — Emergency • The electronics consist of a solid-state charger, transfer circuit and low-voltage battery disconnect circuit. • The unit test switch and AC “On” indicator light are housed in a separate module that may be attached directly to the unit housing or mounted remotely for ease of testing. • All ELS Series units are rated for operation in NEC Class I, Division 1 and 2, Groups C and D; and Class II, Division 1 and 2, Groups E, F, and G environments. • Housing provisions allow for the attachment of two optional explosionproof lighting fixtures. • Unit capacity is sufficient for the connection of up to four 6- or 12- volt, 18-watt fixtures. • Units provide 90 minutes of emergency operation. • The solid-state charger maintains battery at full charge. • Upon failure of utility voltage, the DC emergency lighting load is connected to the battery. • During emergency operation, automatic battery protection from deep discharge damage is provided by a low-voltage battery disconnect (LVD) circuit. • Upon restoration of normal power, the charger will begin a recharge cycle. It will bring the battery to full capacity within acceptable UL time standards. • A pilot light indicates the presence of AC line voltage, and a test switch is provided for checking transfer operation. Lock-out type guard on push button accepts locks with up to 1/4”/6.5 mm hasp. • A universal transformer allows operation on 120 or 277 Vac lines. • Emergency power source is a maintenance-free, sealed, pure-lead battery suited for harsh temperature environments for 32 °F to 104 °F/0 °C to 40 °C. — Never necessary to add water. — Expected life is 10 years — Compact in design • Standard illumination is provided during power failure only using fixtures specially designed for emergency lighting in hazardous environments, supplied with double contact bayonet base 18or 28-watt incandescent lamps. • Designed for easy installation. Provided with 4 mounting holes for attachment to a wall or other suitable surface. Mounting hardware not included. • Housing is drilled and tapped for installation of utility 1/2”/12.7 mm NPT conduit. • Quick access to internal wiring and components is provided by thread-on cover. • All necessary fittings for test switch/ pilot light module supplied standard. Standard Materials • Battery enclosure, fixtures, guards and pendant mount: copperfree (4/10 of 1% max.) aluminum. • Ceiling and bracket mounts: malleable iron with aluminum adapter • Reflectors: porcelain enameled steel • Test Switch: copperfree (4/10 of 1% max.) aluminum with stainless steel hardware Standard Finishes • Enclosure, fixtures and test station: epoxy powder coat finish electrostatically applied for complete and uniform surface protection • Reflectors: white porcelain enamel Options • The fixture may be adapted to serve as an exit sign through use of an Auxiliary Exit Housing. • Time Delay Relay (15 minutes) available to permit normal lighting to re-establish brightness. Add suffix -T1 for 120 Vac, or -T2 for 277 Vac. Certifications and Compliances • UL Standard: UL 924, UL 844, UL 1598 • UL Listed: 175025 * Contact your sales representative for Class I, Group B rating. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1327 ELS Series Emergency Lighting System Technical Data Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications Class I, Division 1 and 2, Groups B*, C, D Class II, Division 1 and 2, Groups E, F, G Class III Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide ELS 2 18 Series: 6 T1G Wattage per lamp 18 – 18 W 28 – 28 W Options T1 – Time delay relay, 120 Vac input T2 – Time delay relay, 277 Vac input G – Guard installed on fixture Lighting Number of direct mounted fixtures 0 – no direct mounted fixtures 1 – 1 direct mounted fixture 2 – 2 direct mounted fixtures Lamp Voltage 6 – 6 Vdc 12 – 12 Vdc Lighting: Explosionproof — Emergency Capacity of standard ELS unit (75 W for 90 minutes) Up to 2 fixtures may be direct mounted. The remainder must be remote mounted. Combination Number Number of Fixtures Wattage per Fixture Total Wattage 1 1 18 18 2 1 28 28 3 2 18 36 4 2 28 56 5 3 18 54 6 1 28 64 6 2 18 64 7 4 18 72 Lamp Watts Supply Wire Temp °F/°C Ambient Temp °F/°C Class I, Division 1 & 2 Operating Temperature Class II, Division 1 & 2 (Groups E, F & G) Operating Temperature 18 257/125 104/40 T5 T3C 28 257/125 104/40 T5 T3C “T” Numbers Represent the Maximum Surface Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code. Operating temperatures are with and without reflectors and guards. “T” Number T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp Range (°F) 664842 619662 574617 538572 502536 448500 421446 394419 358392 331356 322329 277320 250275 214248 187212 185 Temp. Range (°C) 351450 326350 301325 281300 261280 231260 216230 201215 181200 166180 161165 136160 121135 101120 86100 85 * Contact your sales representative for Class I, Group B rating. 1328 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 ELS Series Emergency Lighting System Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Emergency Lighting System with Direct Mounted Fixtures Catalog Number (Lamp(s) Included) Watts per Lamp Lamp Voltage Input Voltage 2 18 6 Vdc 120/277 Vac ELS2186 ➊➋➌➍ 2 28 6 Vdc 120/277 Vac ELS2286 ➊➋➌➍ 2 18 12 Vdc 120/277 Vac ELS21812 ➊➋➌➍ 2 28 12 Vdc 120/277 Vac ELS22812 ➊➋➌➍ 1 18 6 Vdc 120/277 Vac ELS1186 ➋➌➍ 1 28 6 Vdc 120/277 Vac ELS1286 ➊➋➌➍ 1 18 12 Vdc 120/277 Vac ELS11812 ➊➋➌➍ 1 28 12 Vdc 120/277 Vac ELS12812 ➊➋➌➍ Lamp Voltage Input Voltage Catalog Number with Push-to-Test (Incl. Fittings) 6 Vdc 120/277 Vac ELS06 ➊➋➌ 12 Vdc 120/277 Vac ELS012 ➊➋➌ Lighting Number of Fixtures Emergency Lighting System Enclosure with Battery and Charger Watts Per Lamp Lamp Voltage Catalog Number (Lamp Included) 18 6 Vdc AP1050-186-DM ➍ 28 6 Vdc AP1050-286-DM ➍ 18 12 Vdc AP1050-1812-DM ➍ 28 12 Vdc AP1050-2812-DM ➍ ➊ 1/2” NPT provided for AC input. ➋ Add suffix T1 for time delay relay for 120 Vac input. ➌ Add suffix T2 for time delay relay for 277 Vac input. ➍ To order fixtures with guard installed add suffix G. Reflectors and exit signs are ordered separately. See Accessories page. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1329 Lighting: Explosionproof — Emergency Emergency Lighting System Fixture for Direct Mounting to Enclosure Includes all necessary fittings and lamp. ELS Series Emergency Lighting System Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Emergency Lighting System Fixture for Remote Mounting — Lamp Included — Shown with Optional Guard Mounting Type Watts Per Lamp Lamp Voltage Catalog Number (Lamp Included) ➊ 18 6 Vdc AP1050-186 28 6 Vdc AP1050-286 18 12 Vdc AP1050-1812 28 12 Vdc AP1050-2812 18 6 Vdc AC1050-186 28 6 Vdc AC1050-286 18 12 Vdc AC1050-1812 28 12 Vdc AC1050-2812 18 6 Vdc ALB1050-186 28 6 Vdc ALB1050-286 18 12 Vdc ALB1050-1812 28 12 Vdc ALB1050-2812 18 6 Vdc ASB1050-186 28 6 Vdc ASB1050-286 18 12 Vdc ASB1050-1812 28 12 Vdc ASB1050-2812 Pendant — One 1/2” Hub Lighting: Explosionproof — Emergency Lighting Ceiling — Four 1/2” Hubs, Three Close-Up Plugs Long Bracket — Four 1/2” Hubs, Three Close-Up Plugs Short Bracket — 15 degrees — Two 1/2” Hubs, One Close-Up Plug Emergency Lighting System Replacement Fixtures — Lamp included — Fits existing mounting hood Watts Per Lamp Lamp Voltage Catalog Number (Lamp Included) ➊ 18 6 Vdc AAU1N-186 28 6 Vdc AAU1N-286 18 12 Vdc AAU1N-1812 28 12 Vdc AAU1N-2812 ➊ To order fixtures with guard installed, add suffix G. Reflectors and exit signs are ordered separately. See Accessories page. 1330 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 ELS Series Emergency Lighting System Accessories Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications Description Catalog Number Guard AAGU1 Three-Way Exit Sign CJEXRN Epoxy enameled steel — 6”-high red lettering Mounts to fixture units in place of guard. AEXR-15R Lighting Epoxy enameled steel — 6”-high red lettering Mounts to fixture units in place of guard. Single-Sided Exit Sign Lighting: Explosionproof — Emergency 30° Angle Reflector AARW15AN Standard Dome Reflector AARW15ST Push-to-Test Station Complete Push-to-Test Station EFDCB150J1U1-T-A Cover with Switch and Pilot Light EFKB-J1U1-TEST Switch Only SPBB-U1-Q Pilot Light Only SPLNS-RE-B Lamp, 18 W, 6 Vdc 59620527074 Lamp, 28 W, 6 Vdc 59620527075 Lamp, 18 W, 12 Vdc 59620527076 Lamp, 28 W, 12 Vdc 59620527078 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1331 ELS Series Emergency Lighting System Weights and Dimensions Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications Weight lbs/kg Catalog Number Weight lbs/kgs Catalog Number 52.0/23.6 11.0/5.0 9.0/4.1 12.5/5.7 16.6/7.5 12.5/5.7 4.0/1.8 ELS06, ELS012 AP1050-186-DM AP1050-186 AC1050-186 ALB1050-186 ASB1050-186 EFDCB150J1U1-T-A 7.6/3.4 0.4/0.2 5.0/2.3 5.0/2.3 2.1/1.0 2.1/1.0 AAU1N-186 AAGU1 AEXR-15R CJEXRN AARW15AN AARW15ST Dimensions in Inches/Millimeters Lighting 14.69"/ 373.1 mm 13.50"/342.9 mm 14.38"/365.3 mm 11.63"/ 295.4 mm 10.75"/ 273.1 mm 12.00"/ 304.8 mm 14.12"/ 358.6 mm 12.25"/ 311.2 mm 12.25"/ 311.2 mm Lighting: Explosionproof — Emergency 13.13"/333.5 mm 7.06"/ 179.3 mm Battery Enclosure Direct Mount fixture 4.75"/120.7 mm 5.38"/ 136.7 mm Pendant Mount 2.63"/66.8 mm 2.69"/68.3 mm 13.13"/ 333.5 mm 12.94"/ 328.7 mm .38"/9.7 mm 3.38"/ 85.9 mm .38"/9.7 mm 1.31"/ 33.8 mm 45° 13.56"/ 344.4 mm 13.75"/ 349.3 mm 13.13"/ 333.5 mm 13.75"/ 349.3 mm 9.13"/ 231.9 mm 12.38"/ 314.5 mm 7.06"/ 179.3 mm Ceiling Mount Long Bracket Mount Short Bracket Mount 3.00"/ 76.2 mm 6.88"/ 174.8 mm 5.41"/ 137.4 mm 11.75"/298.5 mm "/ .00 m 104.0 m 25 8.50"/ 215.9 mm EFDCB150J1JU1-T-A AEXR-15R 33.50"/850.9 mm 7.63"/ 193.8 mm AARW15AN 13.00"/330.2 mm 9.25"/ 235.0 mm 4.38"/ 111.3 mm 28.67"/ 728.2 mm ELS with 2 direct mounted fixtures 1332 12.00"/ 304.8 mm CJEXRN 14.00"/355.6 mm AARW15ST Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBE Series Round Bulkhead Luminaires Increased Safety Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IEC IP65 Applications • Suitable for use in: — Stairways — Small areas — Emergency exit Features • For incandescent lamps 60 W to 150 W maximum, mixed lamp 100 W maximum. Lamps not supplied. • E27 lampholder. • Screw locking mechanism. • Operates in all positions. • Connection to lampholder via two 0.003 x 0.004 in2 / 2 x 2.5 mm2 terminals. • Internal earth two terminals 0.003 x 0.004 in2 / 2 x 2.5 mm2. External earth 0.002 x 0.006 in2 / 1 x 4 mm2. • Three M20 entries in “T” formation. Supplied with one M20 cable gland (dia. 0.26 to 0.57 in / 6.5 to 14.5 mm) and two M20 blanking plugs. Standard Materials • • • • • HBERI15 and HBEPGZ Body: gray painted aluminum alloy Diffuser: glass Sealing gasket: silicone Guard: zinc plated steel Cable gland and blanking plug: polyamide Certifications and Compliances Certification Type HBe150 Gas, Zones 1 and 2 — Conforming to ATEX 94/9/CE: CE 0081 II 2 G — ATEX/IEC Protection: Ex e II — T Rating: See Table Dust, Zones 21 and 22 — Conforming to ATEX 94/9/CE: CE 0081 II2 D — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: T216 °F/T102 °C to T279 °F/T137 °C Ambient Temperature: -40 °F/-40 °C to 122 °F/+50 °C CE Declaration of Conformity: 50244 ATEX Certificate: LCIE 02 ATEX 6228X IEC Certificate: LCIE Ex 02.023X Index of Protection (solid & liquid): IP65 Ex Standards: EN / IEC 60079-0; 60079-7; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1 Other Standards: EN / IEC 60529 (IP) Lighting: Increased Safety/Flameproof — Bulkhead Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting • • • • • • • • • • • 1333 HBE Series Round Bulkhead Luminaires Increased Safety Zone 1 & 2 - 21 & 22 II 2 GD ATEX / IEC IP65 Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 6.61/3 915.36/15 1 HBERI15 Pack Catalog Number Protective Guard 1 HBEPGZ Spare lampglass 1 HBEGD Accessories T-Rating for Dust and Gas Power and Type Watts Type Dust Operating Positions Surface T° for Ta = 122° F/50° C Gas For Ta = 104° F/40° C T° at T Rating Cable Entry Lighting Any Position 60 Incandescent 216°F/102°C Any Position Lighting: Increased Safety/Flameproof — Bulkhead 75 Incandescent 225°F/107°C Any Position 100 Mercury 243°F/117°C Any Position 100 Incandescent 279°F/137°C Any Position 150 Mixed 266°F/130°C 122° F/50° C T Rating T° at Cable Entry T2 T2 T3 T3 T4 T4 T2 T2 T3 T3 T4 T4 T2 T2 181°F/83°C T3 T3 181°F/83°C T3 T3 T1 194°F/90°C T1 212°F/100°C T3 194°F/90°C T2 212°F/100°C T3 T3 T2 180°F/82°C T2 92°C T3 180°F/82°C T3 92°C T3 T3 Not Applicable, no need for high temperature cable for cable entry temperature less than +176 ºF/+80 ºC 1334 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBE Series Round Bulkhead Luminaires Increased Safety Dimensions in Inches/Millimeters 6.81"/ 173 mm 6.14"/ 156 mm Cable entries 11.65"/ 296 mm Ø0.23"/ 6 mm 6.30"/ 160 mm Protective guard Photometric Data ➊ Lighting 150 W Incandescent NF C 71-120: .062 J + 0.10 T Candela Distribution Degrees 0 94 5 95 97 15 104 20 104 30 105 40 86 50 85 60 77 70 113 80 115 90 108 100 32 90° 80° 70° Lighting: Increased Safety/Flameproof — Bulkhead 10 100° 60° 50° 40° 30° 0° 15° 20° ➊ Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1335 HBD Series Bulkhead Luminaires Flameproof Zone 1, 2, 21 & 22 II 2 GD ATEX / IEC IP66 - IK08 Applications • Suitable for use in: — Stairways — Small areas — Emergency exit Lighting Features • HBDR — Lamps (not supplied) — Incandescent 200 W maximum — Compact Fluorescent 23 W maximum — Mixed 160 W maximum — Threaded flameproof joint. — Operates on ceiling and wall. • HBRO — Incandescent 60 W to 100 W maximum — Compact fl uorescent 15 W maximum — Operates in any position. — For incandescent 60 W & 100 W a high temperature cable 223 °F/106 °C is required. • Lamps are not supplied. • E27 lampholder. • Fixing by two integrated brackets. • Connection to lampholder via two terminals 0.004 in2 / 2.5 mm2. • Internal earth two terminals 0.004 in2 / 2.5 mm2. • External earth one 0.006 in2 / 4 mm2. • 3 x M20 threaded entries in “T” formation. • Supplied with two blanking plugs M20. HBDR Round Bulkhead Standard Materials • Body and bezel: gray painted aluminum • Glass: sealed toughened lamp glass • Protective guard: zinc plated steel Lighting: Increased Safety/Flameproof — Bulkhead Certifications and Compliances • HBRD — Certification Type HBRd — Gas, Zones 1 and 2 – Conforming to ATEX 94/9/CE: CE 0081 II 2 G – ATEX/IEC Protection: Ex d IIC – T Rating: See Table — Dust, Zones 21 and 22 – Conforming to ATEX 94/9/CE: CE 0081 II 2 D – ATEX/IEC Protection: Ex tD A21 — Ambient Temperature: -40 °F/-40 °C to 131 °F/55 °C — CE Declaration of Conformity: 50242 — ATEX Certificate: LCIE 02 ATEX 6163 — IEC Certificate: LCIE Ex 02.014 • HBRO — Certification Type HBOd — Gas, Zones 1 and 2 – Conforming to ATEX 94/9/CE: CE 0081 II 2 G – ATEX/IEC Protection: Ex d IIB – T Rating: See Table — Dust, Zones 21 and 22 – Conforming to ATEX 94/9/CE: CE 0081 II 2 D – ATEX/IEC Protection: Ex tD A21 — Ambient Temperature: -4 °F/-20 °C to 104 °F/40 °C — CE Declaration of Conformity: 50232 — ATEX Certificate: LCIE 02 ATEX 6162 — IEC Certificate: LCIE Ex 02.013 1336 HBDO Oval Bulkhead • • • • • • • Other Certifications: GOST Index of Protection (solid & liquid): IP66 Impact Resistance (shock): IK08 Internal Volume: > 122.05 in3/ 2 dm3 (2 liters) Ex Standards: EN / IEC 60079-0; 60079-1; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1 Other Standards: EN / IEC 60529 (IP); 62262 (IK) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBDR Series Bulkhead Luminaires Flameproof Zone 1, 2, 21 & 22 II 2 GD ATEX / IEC IP66 - IK08 Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 16.53/7.5 51.59/23.4 1 HBDR Pack Catalog Number 1 HBDRPGZ Accessories Protective Guard T-Rating for Gas Operating Positions Power and Type Watts 8 15 Type Compact Fluorescent Compact Fluorescent Ambient Temperature T Rating T Rating Ceiling Wall 104° F/40° C T6 T6 122° F/50° C T6 T6 131°F/55°C T6 T6 104° F/40° C T6 T6 122° F/50° C T6 T6 131°F/55°C T6 T6 T Rating T6 T6 T6 T5 T5 T4 Incandescent 200 Incandescent T Rating T Rating T5 T4 T4 T4 T4 T4 T5 T4 T4 T4 T4 T4 100 Mixed 180 Mixed T° at cable entry — 183° F/84° C 192° F/89° C — 183° F/84° C 192° F/89° C T Rating T Rating T° at cable entry T4 T3 — T4 T4 T3 T3 188° F/87 C 198° F/92° C T4 T3 — T4 T4 T3 T3 189° F/87° C 198° F/92° C Surface Temperature for Dust Operating Positions Power and Type Ceiling Wall Watts 8 15 23 100 Type Compact Fluorescent Compact Fluorescent Compact Fluorescent Incandescent Surface T° for Ta = 131°F/55°C 140° F/60° C 147° F/64° C 156° F/69° C 221° F/105° C T° at Cable Entry Ta= 131°F/55°C – – – – Surface T° for Ta = 131°F/55°C 158° F/70° C 169° F/76° C 205° F/96° C 221° F/105° C T° at Cable Entry Ta= 131°F/55°C – – – – 200 Incandescent 266° F/130° C 192° F/89° C 266° F/130° C 192° F/89° C 100 160 Mixed Mixed 266° F/130° C 300° F/149° C – 198° F/92° C 266° F/130° C 300° F/149° C – 198° F/92° C No need for high temperature cable for cable entry temperature less than 176° F/80° C. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1337 Lighting: Increased Safety/Flameproof — Bulkhead Compact Fluorescent Lighting 23 100 HBDO Series Bulkhead Luminaires Flameproof Zone 1, 2, 21 & 22 II 2 GD ATEX / IEC IP66 - IK08 Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 6.61/3 19.84/9 1 HBDO Pack Catalog Number 1 HBDOPGZ Accessories Protective Guard Terminal block for through wiring 0.003 x 0.004 in / 2 x 2.5 mm with high temperature sleeve 2 2 094784 T-Rating for Gas Lighting: Increased Safety/Flameproof — Bulkhead Lighting Power and Type Watts Type Temperature class for Ta = 104° F/40° C T° at Cable Input for Ta = 104° F/40° C 7 Compact Fluorescent T6 — 11 Compact Fluorescent T6 — 15 Compact Fluorescent T6 — 60 Incandescent T4 223° F/106°C 100 Incandescent T4 223° F/106°C Watts Type Temperature class for Ta = 104° F/40° C T° at Cable Input for Ta = 104° F/40° C 7 Compact Fluorescent 169° F/76° C — 11 Compact Fluorescent 169° F/76° C — 15 Compact Fluorescent 169° F/76° C — 60 Incandescent 246° F/119° C 223° F/106° C 100 Incandescent 246° F/119° C 223° F/106° C T-Rating for Dust Power and Type No need for high temperature cable for cable entry temperature less than +176 °C/+80 °C. 1338 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBDR Series Bulkhead Luminaire Dimensions and Photometric Data Flameproof Dimensions in Inches/Millimeters 7.56"/ 192 mm 12.99"/ 330 mm (with guard) 6.10"/ 155 mm Ø0.43"/ 11 mm 0.51"/ 13 mm 6.69"/ 170 mm 12.08"/ 307 mm (without guard) Photometric Data ➊ Lighting Incandescent NF C 71-120: .068 G + 0.01 T Candela Distribution 0 185 5 178 10 171 15 156 20 132 25 110 30 97 35 87 40 90 45 100 50 96 60 58 70 58 100° 90° 80° 70° Lighting: Increased Safety/Flameproof — Bulkhead Degrees 60° 50° 40° 30° 0° 10° 20° ➊ Polar curves for a 1000 lm output according to NF C 71-120 Luminaire symbol according to NF C 71-121. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1339 HBDO Series Bulkhead Luminaire Dimensions and Photometric Data Flameproof Dimensions in Inches/Millimeters 7.09"/ 180 mm 8.66"/ 220 mm 4.80"/ 122 mm 0.18"/ 4.5 mm 6.30"/ 160 mm Photometric Data ➊ Incandescent NF C 71-120: .068 H Lighting Candela Distribution 67 100° 5 94 10 96 15 99 90° 80° 70° 20 99 60° 25 97 50° 30 95 35 96 40 91 45 91 50 98 60 87 70 69 Lighting: Increased Safety/Flameproof — Bulkhead Degrees 0 40° 30° 0° 10° 20° ➊ Polar curves for a 1000 lm output according to NF C 71-120 Luminaire symbol according to NF C 71-121. 1340 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBN Series Round Bulkhead Luminaires Flameproof Zone 2 and 22 II 3 GD ATEX / IEC IP65 Applications • Suitable for use in: — Stairways — Small areas — Emergency exit Features • For incandescent lamps 60 W to 150 W maximum, mixed lamp 100 W maximum, mercury 80 W maximum (remote mercury ballast not supplied). Lamps not supplied. • E27 lampholder. • Screw locking mechanism. • Operates in all positions. • Connection to lampholder via two 0.003 x 0.004 in2 / 2 x 2.5 mm2 terminals. • Internal earth two terminals 0.003 x 0.004 in2 / 2 x 2.5 mm2. External earth 0.002 x 0.006 in2 / 1 x 4 mm2. • Three M20 entries in “T” formation. Supplied with one M20 cable gland (dia. 0.26 to 0.57 in / 6.5 to 14.5 mm) and two M20 blanking plugs. Standard Materials • • • • • HBNRI15 and HBEPGZ Body: gray painted aluminum alloy Diffuser: glass Sealing gasket: silicone Guard: zinc plated steel Cable gland and blanking plug: polyamide Certification Type HBn150 Gas, Zone 2 — Conforming to ATEX 94/9/CE: CE II 3 G — ATEX/IEC Protection: Ex nR II — T Rating: See Table 1 Dust, Zone 22 — Conforming to ATEX 94/9/CE: CE II 3 D — ATEX/IEC Protection: Ex tD A22 — Surface Temperature: See Table 1 Ambient Temperature: -4 °F/-20°C Ta 122°F/50°C -4 °F/-20°C Ta 104 °F/40°C (80 W mercury) CE Declaration of Conformity: 50220 ATEX Certificate: LCIE 03 ATEX 6167X IEC Certificate: LCIE Ex 03.026X Index of Protection (solid & liquid): IP65 Ex Standards: EN / IEC 60079-0; 60079-15; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1 EMC Standards: EN / IEC 55015; 61547 Other Standards: EN / IEC 60529 (IP) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Increased Safety/Flameproof — Bulkhead • • • • • • • • • • • • Lighting Certifications and Compliances 1341 HBN Series Round Bulkhead Luminaires Flameproof Zone 2 and 22 II 3 GD ATEX / IEC IP65 Weight (lbs/kg) Volume (in3/dm3) Pack Catalog Number 6.61/3 33.07/15 1 HBNRI15 Pack Catalog Number 1 HBEPGZ Accessories Protective Guard HBEGD Spare Lampglass T-Rating for Dust and Gas Lighting: Increased Safety/Flameproof — Bulkhead Lighting Power and Type Dust Gas Watts Type Surface T° for Ta = 122 °F/+50 °C T Rating for Ta = 104 °F/+40 °C T Rating for Ta = 122 °F/+50 °C T° at Cable Input 60 Incandescent 214 °F/101 °C T5 T4 — 75 Incandescent 219 °F/104 °C T5 T4 — 80 Mercury 268 °F/131 °C (Ta = 104 °F/+40 °C) T3 — — 100 Incandescent 237 °F/114 °C T4 T4 181 °F/83 °C 100 Mixed 257 °F/125 °C T4 T4 212 °F/100 °C 150 Incandescent 248 °F/120 °C T4 T4 198 °F/92 °C 1342 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBN Series Round Bulkhead Luminaire Dimensions and Photometric Data Flameproof Dimensions in Inches/Millimeters 6.81"/173 mm Cable Entries Cable entries 11.65"/296 mm 6.14"/ 156 mm 0.24"/ 6 mm 6.30"/ 160 mm Protectiveguard Guard Protective Photometric Data ➊ Incandescent NF C 71-120: .062 J + 0.10 T 0 185 Degrees 178 171 15 156 20 132 30 110 40 97 50 87 60 90 70 100 80 96 90 58 100 58 100° 90° 80° 70° 60° 50° Lighting: Increased Safety/Flameproof — Bulkhead 5 10 Lighting Candela Distribution 40° 30° 0° 10° 20° ➊ Polar curves for a 1000 lm output according to NF C 71-120 Luminaire symbol according to NF C 71-121. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1343 HBDC Series Cylindrical Bulkhead Luminaires Flameproof Zone 1, 2, 21 & 22 II 2 GD ATEX / IEC IPP66/68 (10M) - IK08 Applications • For illumination of: — Stairways — Small areas — Emergency exit Features • • • • • • • • • For lamps: — 70 W high pressure sodium (ovoid type E27 lampholder) — 18/20 W compact fluorescent lamp (E27 lampholder) — 2 x 40 W incandescent lamp (E27 lampholder) — 8 W fluorescent bulb (G5 lampholder) (lamp supplied) HPS version: compensated power supply 230/240 V 50 Hz (+/-10%) with power factor 0.9. Connection to plug-in terminal block via 2 x 3 terminals .025 cm²/2.5 mm². Operates in any position. Threaded access cover with O-ring seal. Two integrated mounting lugs. 1 external earth via .04 cm²/4 mm² bracket. 2 threaded cable entries. Supplied with 1 plug M20 (cable gland not supplied). 70 W Sodium Version Compact Fluorescent Version Lighting Standard Material • End cap and cover: Zamak, anticorrosion treated and painted gray • Sealed tube: toughened glass • External reflector: galvanized steel painted white • Protective guard: zinc plated steel • Lamps are not supplied except for 8 W fluorescent bulb Options Lighting: Increased Safety/Flameproof — Bulkhead • Fixing accessories available in 316 stainless steel or zinc plated steel. • Fall prevention fixing kit in stainless steel. Certifications and Compliances • • • • • • • • • • • • • • Certification Type: FLd Zone 1 - 2 — Conforming to ATEX 94/9/CE: CE 0081 II 2 G — ATEX/IEC Protection: Ex d IIC — T Rating: See Table Zone 21 - 22 — Conforming to ATEX 94/9/CE: CE 0081 II 2 D — ATEX/IEC Protection: Ex tD A21 — Surface Temperature: (See table) Ambient Temperature: -4 °F/-20 °C ≤ Ta ≤ +131 °F/55 °C -4 °F/-20 °C ≤ Ta ≤ +131 °F/55 °C for 70W HPS CE Declaration of Conformity: 50203 ATEX Certificate: LCIE 97/ ATEX 6012 IECEx Certificate: IECEx LCI 04.0018 Other Certifications: GOST Index of Protection (solid & liquid): IP66 / 68 (10 m) Impact Resistance (shock): IK08 Internal Volume: > 122 in³/2 dm3 (2 liters) Ex Standards EN / IEC 60079-0; 60079-1; 61241-0; 61241-1 Product Standards: EN / IEC 60598-1 Other Standards: EN / IEC 60529 (IP); 62262 (IK) 1344 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 HBDC Series Cylindrical Bulkhead Luminaires Flameproof Zone 1, 2, 21 & 22 II 2 GD ATEX / IEC IPP66/68 (10M) - IK08 Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide HBDC F 1 Series: HBDC 40 02A Quantity of Lamps: 1 - One Lamp 2 - Two Lamp Lamp Type: I - Incandescent F - Fluorescent L - High Pressure Sodium Voltage: 02A - 24 Vac 50/60 Hz 02D - 24 Vdc 04A - 48 Vac 50/60 Hz 04D - 48 Vdc 11A - 110 Vac 50/60 Hz 11D - 110 Vdc 24A - 230/240 Vac 50/60 Hz ➍ 24B - 230/240 Vac/Vdc 50/60 Hz Power: 40 - 40 W ➊ 18 - 18/20 W ➋ 70 - 70 W ➌ 08 - 8 W Fluorescent Weight lbs/kgs Volume in3/dm3 Catalog Number Pack 2x40 W Incandescent ➎ E27 – 16/7.1 1892/31 HBDCI240 1 70 W HP Sodium ➎ E27 230/240 Vac 50 Hz 16/7.1 2014/33 HBDCL17024A 1 1x8 W Fluorescent G5 24 Vdc 18/8.3 1892/31 HBDCF10802D 1 1x8 W Fluorescent G5 48 Vdc 18/8.3 1892/31 HBDCF10804D 1 1x8 W Fluorescent G5 110 Vdc 18/8.3 1892/31 HBDCF10811D 1 G5 230/240 Vac 50/60 Hz 18/8.3 1892/31 HBDCF10824B 1 18/8.3 1892/31 HBDCF20824B 1 16/7.1 2014/33 HBDCF118 1 1x8 W Fluorescent 2x8 W Fluorescent 1x18/20 W Compact Fluorescent (1) Versions 198/254 Vdc G5 230/240 Vac 50/60 Hz 198/254 Vdc E27 – Dust Gas Surface Temperature T Rating Without External Reflector °F/°C With External Reflector °F/°C Without External Reflector Ta=+104 °F/ +40 °C Ta=+131 °F/ +55 °C With External Reflector Ta=+104 °F/ +40°C Ta=+131°F/ +55°C Incandescent lamp (2x40 W) 203/95 203/95 T5 T5 T5 T5 Compact Fluorescent lamp (20 W max) 203/95 266/130 T6 T5 T5 T4 Fluorescent (8 W - G5 lampholder) 203/95 266/130 T6 T5 T5 T4 – – High Pressure Sodium Lamp (70 W ovoid) 252/122 – T4 for Ta = +122 °F/ +50°C ➊ Incandescent Lamp ➋ Compact Fluorescent Lamp ➌ High Pressure Sodium Lamp (HP) ➍ 50 Hz only for the 70 W HPS Version ➎ Lamp not supplied Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1345 Lighting: Increased Safety/Flameproof — Bulkhead Voltage Lighting Lampholder Lamp HBDC Series Cylindrical Bulkhead Luminaires Flameproof Zone 1, 2, 21 & 22 II 2 GD ATEX / IEC IPP66/68 (10M) - IK08 Accessories Catalog Number Packing External reflector in galvanized steel (painted white) (not compatible with 70 W HPS version) Description FDER1G 1 Protective guard in zinc plated steel FDPG1Z 1 Protective guard in zinc plated steel for 70 W HPS version FDPG5Z 1 Quick one-hand fixing (Set of 2 brackets) in zinc plated steel FDFBZ 1 Quick one-hand fixing (Set of 2 brackets) in 316 stainless steel FDFBS 1 Fixing unit on flat surface (Set of 2 brackets) in zinc plated steel FDSBZ 1 Fixing unit on flat surface (Set of 2 brackets) in 316 stainless steel FDSBS 1 Fixing unit for 1"1/2 (Ø1.93"/49 mm) or 1"1/4 (Ø1.65"/42 mm) tube in zinc plated steel FDHC49Z Fixing unit for 1"1/2 (Ø1.93"/49 mm) or 1"1/4 (Ø1.65"/42 mm) tube in 316 stainless steel FDHC49S Fixing unit for 2" (Ø2.36"/60 mm) tube in zinc plated steel FDHC60Z 1 1 1 Fixing unit for 2" (Ø2.36"/60 mm) tube in 316 stainless steel FDHC60S 1 Fall prevention fixing kit (.05"/1.2 m chain) in stainless steel FDSCS 1 Lighting Dimensions (In/mm) HBDCL17024A (70 W HP Sodium) 0.47"/ 12 mm 0.98"/ 25 mm 7.52"/191 mm Ø0.47"/ 12 mm Lighting: Increased Safety/Flameproof — Bulkhead 0.59"/ 15 mm 3.50"/ 89 mm 3.35"/ 85 mm 5.91"/ 150 mm 0.43"/ 11 mm 0.47"/ 12 mm 13.19"/ 335 mm 0.98"/ 25 mm 3.05"/ 77.5 77.5 mm 0.43"/ 11 mm Ø0.47"/ 12 mm 0.20"/ 5.0 mm 15.75"/ 400 mm 400 mm mini 18.50"/ 470 mm 0.20"/ 5.0 mm 7.52"/191 mm 5.91"/ 150 mm HBDC and HBDCF 3.05"/ 77.5 77.5 mm 14.76"/ 375 mm 0.59"/ 15 mm 3.50"/ 89 mm 15.75"/ 400 mm 400 mm mini 16.92"/ 430 mm 3.35"/ 85 mm Photometric Data Polar curves for a 1000 lm flux, according to NF C 71-120 Luminaire symbol according to NF C 71-121 70 W HP Sodium Efficiency 59.4% NF C 71-121: 0.56G + 0.04T 2x40 W Incandescent Efficiency: 75.6% NFC 71-121: 0.74G + 0.02T Candela Distribution 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 1346 0-180 90-270 166 166 167 165 164 Degrees162 162 156 158 151 155 143 151 133 146 122 141 110 135 95 128 81 120 66 111 52 101 39 90 27 Longitudinal Transverse Candela Distribution 150° 120° 105° 90° 75° 60° 45° 30° 0° 15° 0 5 10 15 20 25 30 35 40 45 50 60 70 0-180 90-270 196 Degrees 196 197 198 196 196 193 194 189 190 181 185 176 179 170 172 163 164 155 153 145 128 123 91 99 43 100° 90° 80° 70° 60° 50° 40° 30° 0° 10° 20° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster 250/400™ High Bay Luminaires 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W, 450 W PSMH; 175 W, 250 W, 400 W MH V; 300 W-500 W Incandescent. Applications • For illumination of manufacturing, storage, and other indoor areas. Features Lighting: General Lighting — Area — High Bay • Standard Baymaster fixtures operate in high ambient temperatures. All units suitable for minimum 194 °F/90 °C supply wire. • High efficiency (up to 78% with 250 W HPS lamps) with exceptionally long lamp life—economical to own and operate. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Sockets are heavy duty mogul base, with spring loaded, nickel plated center contact and heavy gauge, nickel plated brass screw shell with double lamp grips to prevent lamps from loosening due to vibration. • Efficient, low glare, compact reflector. • Reflector installs and adjusts to wide, medium, or narrow distribution (without tools) by repositioning spring locks. • Installation is quick and easy: (1) mount junction box to 0.75”/33.4 mm conduit (2) slide ballast onto junction box (3) make connections (4) install lamp (5) snap reflector in place. • Open-top reflector design keeps reflector clean because of thermal barrier and chimney effect, and provides up-light to relieve contrast. Complete Fixture Standard Materials • • • • Ballast: finned, copperfree (4/10 of 1% max.) aluminum Reflector: aluminum Sockets: porcelain Locks: stainless steel Standard Finishes • Ballast: white powder coat polyester • Reflector: natural finished Dimensions 12.38"/ 314.5 mm • All units available with a sensor circuit for automatically lighting an auxiliary safety lamp if a power dip or lamp failure extinguishes the HID lamp. Lighting Options Ballast Housing Assembly 13.75"/349.3 mm Certifications and Compliances • UL Listed: E109438 • UL Standard: 1598 • CSA Certified: LR9349 6.25"/ 158.8 mm 4.75"/349.3 mm Related Products 5.5"/139.7 mm • For power hook, fusing and other suspension accessories, see Fixture Hanger Accessories page. 15.88"/ 403.4 mm Min. 18.25"/ 463.6 mm Max 10.38"/ 263.7 mm 16"/ 406.4 mm Remote Ballast Mounting V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1347 Baymaster 250/400™ High Bay Luminaire Performance 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W, 450 W PSMH; 175 W, 250 W, 400 W MH V 150 Watt S./M.H. † Effic. 175 Watt S./M.H. † Effic. 250 Watt S./M.H. † 400 Watt S./M.H. † Effic. Distribution * Effic. Narrow 71.0% .8:1 — — 80.0% 0.6:1 80.0% 0.6:1 Medium 72.1% 1.5:1 — — 77.5% 1.4:1 77.6% 1.4:1 Wide 73.2% 2.5:1 — — 74.6% 2.5:1 75.4% 2.5:1 Pulse Start Metal Halide • 149 °F/65 °C maximum ambient temperature for 175 W-250 W • 131 °F/55 °C maximum ambient temperature 320 W-450 W Distribution * 175 Watt Effic. S./M.H. † 200 Watt Effic. S./M.H. † 250 Watt Effic. S./M.H. † 320 Watt Effic. S./M.H. † 400 Watt Effic. S./M.H. † 450 Watt Effic. S./M.H. † Narrow 67.7% 0.6:1 73.3% 0.7:1 78.6% 0.2:1 67.5% 0.7:1 67.5% 0.7:1 67.2% 0.7:1 Medium 72.3% 1.4:1 73.8% 1.7:1 75.2% 1.5:1 70.3% 1.6:1 70.6% 1.6:1 70.7% 1.4:1 Wide 74.6% 2.0:1 72.8% 2.2:1 74.1% 2.1:1 70.6% 2.1:1 71.4% 2.1:1 71.6% 2.0:1 Metal Halide V • 149 °F/65 °C maximum ambient temperature for 175 W-250 W • 131 °F/55 °C maximum ambient temperature 400 W 175 Watt 250 Watt 400 Watt Distribution * Effic. S./M.H. † Effic. S./M.H. † Effic. S./M.H. † Narrow 82.9% 0.8:1 82.9% 0.8:1 79.6% 1:1 Medium 82.8% 1.8:1 82.8% 1.8:1 77.2% 2:1 Wide 80.4% 2.4:1 80.4% 2.4:1 75.2% 2.7:1 Lighting Lighting: General Lighting — Area — High Bay High Pressure Sodium • 149 °F/65 °C maximum ambient temperature for 150 W-250 W • 131 °F/55 °C maximum ambient temperature 400 W V CSA Certification only. 1348 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster 250/400™ High Bay Luminaire Electrical Specifications 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W, 450 W PSMH; 175 W, 250 W, 400 W MH V High Pressure Sodium — All ballasts are C.W.A. type, except 150 W HPS which is HX-Auto 150 W Line Volts Start 120 2.00 250 W Oper. Total Watts Start 1.70 188 2.00 400 W Oper. Total Watts Start Oper. Total Watts 2.50 295 3.30 3.80 465 208 1.15 .95 188 1.20 1.50 295 1.80 2.20 465 240 1.00 .85 188 1.00 1.30 295 1.60 1.90 465 277 .85 .72 188 .85 1.10 295 1.40 1.70 465 347 V 0.52 0.56 188 0.60 0.93 295 1.00 1.32 465 .47 189 .40 .65 295 .80 1.00 465 480 .50 Line Volts Start Oper. 200 W Total Watts Start Oper. Pulse Start Metal Halide — Super C.W.A. Ballast Amps 250 W 320 W Total Total Total Watts Start Oper. Watts Start Oper. Watts Start 400 W Oper. 450 W Total Watts Start Oper. Total Watts 120 .90 1.78 199 2.10 2.00 235 1.90 2.50 288 2.60 3.25 368 3.50 4.00 454 4.00 4.40 510 208 .50 1.08 199 1.15 1.25 235 1.10 1.45 288 1.50 1.90 368 2.00 2.30 454 2.30 2.60 510 240 .35 .89 199 1.10 1.00 235 .96 1.25 288 1.30 1.65 368 1.75 2.00 454 2.00 2.20 510 277 .30 .76 199 .75 .85 235 .85 1.10 288 1.15 1.40 368 1.50 1.75 454 1.70 1.90 510 347 V 0.25 0.65 199 .25 .70 232 0.62 0.90 288 0.70 1.10 368 1.10 1.35 454 1.10 1.50 505 .50 213 .35 .50 237 .46 .60 285 .60 .80 368 .90 1.00 454 .85 1.12 514 480 .25 175 W Line Volts Start Oper. Total Watts 120 1.3 1.8 213 Metal Halide V — C.W.A. Ballast Amps 250 W Total Start Oper. Watts Start Oper. Total Watts 1.2 3.25 4.0 458 2.6 295 400 W .75 1.1 213 .65 1.5 295 1.9 2.3 458 .65 .90 213 .60 1.3 295 1.65 2.0 458 277 .55 .78 213 .50 1.12 295 1.4 1.75 458 347 0.50 0.65 213 0.80 0.90 295 1.20 1.40 458 Lighting 208 240 V CSA Certified only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: General Lighting — Area — High Bay 175 W 1349 Baymaster 250/400™ High Bay Luminaires Quick Estimate Illumination Charts * Lighting Lighting: General Lighting — Area — High Bay 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W, 450 W PSMH; 175 W, 250 W, 400 W MH V 400 Watt High Pressure Sodium 400 Watt Pulse Start Metal Halide 250 Watt High Pressure Sodium 250 Watt Pulse Start Metal Halide How to use Quick-Estimate Illumination Chart 1. Refer to “Quick-Estimate Illumination Chart” for the lamp type and wattage to be used. 2. Determine “room size” of area to be lighted. “Small Room” is 2500 Sq. Ft. or less. “Medium Room” is 2500 Sq. Ft./232.2 Sq.M. thru 10,000 Sq. Ft./929.0 Sq. M. A “Large Room” is 10,000 Sq. Ft./929.0 Sq. M. or more. 3. Find level of light (footcandles) required in vertical column of figures at left of chart. Then follow horizontal line (real or interpolated) to right until it intersects with “Arc” of selected “room size.” Come directly down from point of intersection to horizontal line of number “Square Feet Per Luminaire.” The resulting number (real or interpolated) is the “number of square feet” one Appleton Baymaster will illuminate to the selected average maintained footcandle level when mounted in conjunction with other units in the high bay installation. 4. Divide number of total square feet in project by “number of square feet per luminaire” to get number of units required. 5. Take square root of resulting “number of square feet per luminaire” number to determine spacing between units. * Photometric charts available on request. V CSA Certification only. 1350 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster 250/400™ High Bay Luminaires 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W, 450 W PSMH; 175 W, 250 W, 400 W MH V Pendant Mounting (3/4”) Lamp Type Catalog Number Ballast Housing Assembly Voltage Complete Assembly ➊➋ 150 W HPS 120/208/240/277 V G-HB41AL-MT G-HB411L-MT 150 W HPS 120/277/347 V G-HB41AL-TT V➌ G-HB411L-TT V➌ 150 W HPS 480 V G-HB41AL-48 G-HB411L-48 250 W HPS 120/208/240/277 V G-HB61AL-MT G-HB611L-MT 250 W HPS 120/277/347 V 250 W HPS 480 V G-HB61AL-TT V➌ G-HB61AL-48 G-HB611L-TT V➌ G-HB611L-48 400 W HPS 120/208/240/277 V G-HB71AL-MT G-HB711L-MT 400 W HPS 120/277/347 V 400 W HPS 480 V G-HB71AL-TT V➌ G-HB71AL-48 G-HB711L-TT V➌ G-HB711L-48 G-HB51AP-MT G-HB511P-MT G-HB51AP-TT V➌ G-HB51AP-48 G-HB511P-TT V➌ G-HB511P-48 G-HB201AP-MT G-HB2011P-MT G-HB201AP-TT V➌ G-HB201AP-48 G-HB2011P-TT V➌ G-HB2011P-48 G-HB61AP-MT G-HB611P-MT G-HB61AP-TT V➌ G-HB61AP-48 G-HB611P-TT V➌ G-HB611P-48 G-HB321AP-MT G-HB3211P-MT G-HB321AP-TT V➌ G-HB321AP-48 G-HB3211P-TT V➌ G-HB3211P-48 G-HB71AP-MT G-HB711P-MT G-HB71AP-TT V➌ G-HB71AP-48 G-HB711P-TT V➌ G-HB711P-48 G-HB451AP-MT G-HB4511P-MT G-HB451AP-TT V➌ G-HB451AP-48 G-HB4511P-TT V➌ G-HB4511P-48 For High Pressure Sodium Lamps Lighting: General Lighting — Area — High Bay For Pulse Start Metal Halide Lamps 120/208/240/277 V 175 W PSMH 120/277/347 V 175 W PSMH 480 V 200 W PSMH 120/208/240/277 V 200 W PSMH 120/277/347 V 200 W PSMH 480 V 250 W PSMH 120/208/240/277 V 250 W PSMH 120/277/347 V 250 W PSMH 480 V 320 W PSMH 120/208/240/277 V 320 W PSMH 120/277/347 V 320 W PSMH 480 V 400 W PSMH 120/208/240/277 V 400 W PSMH 120/277/347 V 400 W PSMH 480 V 450 W PSMH 120/208/240/277 V 450 W PSMH 120/277/347 V 450 W PSMH 480 V Lighting 175 W PSMH For Metal Halide Lamps V 175 W MH 120/208/240/277 V G-HB51AH-MT V G-HB511H-MT V 175 W MH 120/277/347 V G-HB51AH-TT V➌ G-HB511H-TT V➌ 250 W MH 120/208/240/277 V G-HB61AH-MT V G-HB611H-MT V 250 W MH 120/277/347 V G-HB61AH-TT V➌ G-HB611H-TT V➌ 400 W MH 120/208/240/277 V G-HB71AH-MT V G-HB711H-MT V 400 W MH 120/277/347 V G-HB71AH-TT V➌ G-HB711H-TT V➌ ➊ Add suffix -E to catalog number if provision for 250 W quartz emergency lamp is desired (lamp not included). Furnished with socket installed and pre-wired (not available on units for remote ballast). ➋ To order fixture complete with lamp, add suffix -L to catalog number. ➌ Supplied complete with CWA Ballast. For 208, 240, 480 or 600 V CWI applications, change the -TT suffix to -C2, -C3, -C6 or -C7 as required. V V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1351 Baymaster 250/400™ High Bay Luminaire Accessories and Replacement Parts 150 W, 250 W, 400 W HPS; 175 W, 200 W, 250 W, 320 W, 400 W, 450 W PSMH; 175 W, 250 W, 400 W MH V; 300 W-500 W Incandescent. For Incandescent Lamps or HID lamps and Remote Ballast ➊ Lamp Type Voltage Catalog Number➑ For Incandescent Lamps or HID lamps and Remote Ballast ➊ 300 W-500 W PS-35, incandescent G-H71AM-RB 250 W-400 W, HPS G-H71AL-RB 250 W, PSMH/MH G-H71AM-RB 400 W, PSMH/MH G-H71AM-RB Accessories and Replacement Parts Type Description Catalog Number Lighting: General Lighting — Area — High Bay Glass Lenses ➋ 1.0"/ 25.4 mm With clear, thermal shock and impact resistant glass lens. G-HB7000-NL With prismatic Corning-73 thermal shock and impact resistant lens. G-HB7000-NL3 Reflector only. G-7AW Aluminum, with gasket (closes off reflector). G-HB7000-SS Has relamp opening, zinc plated. G-HB7000-NG 16.06"/407.9 mm Reflector Socket Shroud 2.25"/ 57.2 mm 3.0"/ 76.2 mm 2.88"/73.2 mm 6.0"/ 152.4 mm Lighting Wire Guard 1.0"/ 25.4 mm 16.75"/ 425.5 mm Safety Cable (not shown) G-HB7000-SC Fuseholder Has 9”/228.6 mm wire leads. G-F10 Supplied with 3 feet of 16/3 SOOW cable and FHHM-75SS cast safety hook PWK V 1.31"/ 33.3 mm Wiring Kit (not shown) ➊ For remote ballast consult your local sales representative. ➋ Lens assemblies shown have stainless steel frame and are furnished with an aluminum socket shroud to close off reflector top (shroud shown). Can be field installed. V CSA Certification only. 1352 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster Prismatic 250/400™ High Bay Luminaires 150 W, 250 W, 400 W HPS. 400 W PSMH. 400 W MH V. Applications • For illumination of manufacturing, storage, and other indoor areas. Features Lighting: General Lighting — Area — High Bay • Standard Baymaster fixtures operate in 104 °F/40 °C ambient temperatures. All units suitable for minimum 194 °F/90 °C supply wire. • High efficiency (up to 78% with 250 W HPS lamps) with exceptionally long lamp life—economical to own and operate. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Mogul base sockets with spring loaded center contact and heavy guage screw shell with double lamp grips to prevent lamps from loosening due to vibration. • Efficient, low glare, compact reflector is UV stabilized, clear, injection molded high-temperature acrylic that provides 15-20% uplight. • Reflector installs and adjusts to wide, medium, or narrow distribution (without tools) by repositioning spring locks. • Installation is quick and easy: (1) mount junction box to 3/4”/19.1 mm conduit (2) slide ballast onto junction box (3) make connections (4) install lamp (5) snap reflector in place • Open-top reflector design keeps reflector clean because of thermal barrier and chimney effect, and provides up-light to relieve contrast. Dimensions Standard Materials • • • • Ballast: finned, aluminum Sockets: heavy duty porcelain Reflector: acrylic Locks: stainless steel 25.0"/635.0 mm 26.0"/660.4 mm Standard Finishes 27.25"/692.2 mm Lighting • Ballast: corrosion polyester • Sockets: nickel plated center contact • Screws: nickel plated brass Options • All units available with a sensor circuit for automatically lighting an auxiliary safety lamp if a power dip or lamp failure extinguishes the HID lamp. 16.25"/ 412.8 mm Certifications and Compliances • UL Listed: E109438 • UL Standard: 1598 • CSA Certified: LR9349 Related Products • For power hook, fusing and other suspension accessories, see Fixture Hanger Accessories page. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1353 Baymaster Prismatic 250/400™ High Bay Luminaires 150 W, 250 W, 400 W HPS. 400 W PSMH. 400 W MH V. Pendant Mounting Lamp Type Voltage Complete Assembly ➊ Catalog Number Ballast Housing Assembly Lighting: General Lighting — Area — High Bay For High Pressure Sodium Lamps G-HB41PL-MT G-HB411L-MT G-HB41PL-TT V➋ G-HB411L-TT V➋ 480 G-HB41PL-48 G-HB411L-48 250 W HPS 120/208/240/277 V G-HB61PL-MT G-HB611L-MT 250 W HPS 120/277/347 V G-HB61PL-TT V➋ G-HB611L-TT V➋ 250 W HPS 480 G-HB61PL-48 G-HB611L-48 400 W HPS 120/208/240/277 V G-HB71PL-MT G-HB711L-MT 400 W HPS 120/277/347 V G-HB71PL-TT V➋ G-HB711L-TT V➋ 400 W HPS 480 G-HB71PL-48 G-HB711L-48 400 W PSMH 120/208/240/277 V G-HB71PP-MT G-HB711P-MT 400 W PSMH 120/277/347 V G-HB71PP-TT V➋ G-HB711P-TT V➋ 400 W PSMH 480 G-HB71PP-48 G-HB711P-48 150 W HPS 120/208/240/277 V 150 W HPS 120/277/347 V 150 W HPS For Pulse Start Metal Halide Lamps For Metal Halide Lamps V 400 W MH 120/208/240/277 V G-HB71PH-MT V G-HB711H-MT V 400 W MH 120/277/347 V G-HB71PH-TT V➋ G-HB711H-TT V➋ Accessories Lighting Description Catalog Number 16” Prismatic Reflector only. G-7PR 16” Prismatic Reflector with clamp band and clear tempered glass lens. G-7PR-IL V 16” Prismatic Reflector with clamp band and prismatic acrylic lens. G-7PR-ILP V ➊ To order fixture complete with lamp, add suffix -L to catalog number. ➋ Supplied complete with CWA Ballast. For 208, 240, 480 or 600 V CWI applications, change the -TT suffix to -C2, -C3, -C6 or -C7 as required. V V CSA Certification only. 1354 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster Prismatic 250/400™ High Bay Luminaire Electrical Specifications 150 W, 250 W, 400 W HPS. 400 W PSMH. 400 W MH V. • Ballast has primary taps for 120, 208, 240 and 277 Volts. • Add suffix -E to catalog number if provision for 150 W quartz emergency lamp is desired (lamp not included). Furnished with socket installed and pre-wired. • 400 W MH lamps: some manufacturers recommend that their lamps be operated in enclosed units only—contact your lamp distributor or lamp manufacturer for the latest safety information. • To order fixture complete with lamp, add suffix -L to catalog number. High Pressure Sodium — All ballasts are C.W.A. type, except 150 W HPS which is HX-Auto 150 W Line Volts Start Oper. 250 W Total Watts Start Oper. 400 W Total Watts Start Oper. Total Watts 2.00 1.70 188 2.00 2.50 295 3.30 3.80 465 1.15 .95 188 1.20 1.50 295 1.80 2.20 465 240 1.00 .85 188 1.00 1.30 295 1.60 1.90 465 277 .85 .72 188 .85 1.10 295 1.40 1.70 465 347 V 0.52 0.56 188 0.60 0.93 295 1.00 1.32 465 .47 189 .40 .65 295 .80 1.00 465 480 .50 Oper. Total Watts Start Oper. Pulse Start Metal Halide — Super C.W.A. Ballast Amps 250 W 320 W Total Total Total Watts Start Oper. Watts Start Oper. Watts Start .90 1.78 199 2.10 2.00 235 1.90 175 W Line Volts Start 120 200 W 2.50 288 2.60 3.25 368 3.50 400 W 450 W Oper. Total Watts Start Oper. Total Watts 4.00 454 4.00 4.40 510 208 .50 1.08 199 1.15 1.25 235 1.10 1.45 288 1.50 1.90 368 2.00 2.30 454 2.30 2.60 510 240 .35 .89 199 1.10 1.00 235 .96 1.25 288 1.30 1.65 368 1.75 2.00 454 2.00 2.20 510 277 .30 .76 199 .75 .85 235 .85 1.10 288 1.15 1.40 368 1.50 1.75 454 1.70 1.90 510 347 V 0.25 0.65 199 .25 .70 232 0.62 0.90 288 0.70 1.10 368 1.10 1.35 454 1.10 1.50 505 .50 213 .35 .50 237 .46 .60 285 .60 .80 368 .90 1.00 454 .85 1.12 514 480 .25 Line Volts Start Oper. Total Watts Lighting 175 W Metal Halide V — C.W.A. Ballast Amps 250 W Total Start Oper. Watts Start 400 W Oper. Total Watts 120 1.3 1.8 213 1.2 2.6 295 3.25 4.0 458 208 .75 1.1 213 .65 1.5 295 1.9 2.3 458 240 .65 .90 213 .60 1.3 295 1.65 2.0 458 277 .55 .78 213 .50 1.12 295 1.4 1.75 458 347 0.50 0.65 213 0.80 0.90 295 1.20 1.40 458 V CSA Certified only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: General Lighting — Area — High Bay 120 208 1355 Baymaster Prismatic 250/400™ High Bay Luminaires Quick-Estimate Illumination Charts * Lighting Lighting: General Lighting — Area — High Bay 150 W, 250 W, 400 W HPS. 400 W PSMH. 400 W MH V. 400 Watt High Pressure Sodium 400 Watt Pulse Start Metal Halide 250 Watt High Pressure Sodium 250 Watt Pulse Start Metal Halide How to use Quick-Estimate Illumination Chart 1. Refer to “Quick-Estimate Illumination Chart” for the lamp type and wattage to be used. 2. Determine “room size” of area to be lighted. “Small Room” is 2500 Sq. Ft. or less. “Medium Room” is 2500 Sq. Ft. thru 10,000 Sq. Ft. A “Large Room” is 10,000 Sq. Ft. or more. 3. Find level of light (footcandles) required in vertical column of figures at left of chart. Then follow horizontal line (real or interpolated) to right until it intersects with “Arc” of selected “room size.” Come directly down from point of intersection to horizontal line of number “Square Feet Per Luminaire.” The resulting number (real or interpolated) is the “number of square feet” one Appleton Baymaster will illuminate to the selected average maintained footcandle level when mounted in conjunction with other units in the high bay installation. 4. Divide number of total square feet in project by “number of square feet per luminaire” to get number of units required. 5. Take square root of resulting “number of square feet per luminaire” number to determine spacing between units. * Photometric charts available on request. * Photometric charts available on request. V CSA Certification only. 1356 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster Prismatic 250/400™ High Bay Luminaire Photometric Data * 150 W, 250 W, 400 W HPS. 400 W PSMH. 400 W MH V. Square Steel Poles for Davit Mount Luminaires Typical Footcandle Values 30 — — — — — — — — — — — .01 .01 .02 .03 .05 .07 .10 .14 .23 .55 40 — — — — — .01 .01 .01 .02 .03 .04 .05 .06 .08 .10 .21 .37 .60 .91 1.35 1.91 50 .01 .01 .01 .02 .02 .03 .03 .04 .05 .06 .10 .17 .26 .38 .54 .74 1.00 1.29 1.62 2.05 2.69 400 Watt High Pressure Sodium 60 .02 .03 .03 .04 .04 .06 .09 .14 .20 .27 .35 .46 .60 .77 .93 1.13 1.37 1.66 2.02 2.16 2.21 Lighting: General Lighting — Area — High Bay 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 Mounting Height Feet Distance in terms of mounting height ◊ Distance (ft) Ahead/ Behind Footcandle Distance in terms of mounting height ◊ 1.06 2.53 9.07 2.21 1.85 3.39 3.17 2.18 400 W HPS 50 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 3.08 4.51 6.64 8.65 8.85 8.95 9.25 11.4 13.7 12.7 6.58 1.15 .60 .77 1.13 1.11 .85 4.55 4.93 4.98 4.98 5.04 5.49 6.41 7.47 7.67 6.53 3.70 .81 .40 .31 .43 .59 .70 3.19 3.16 3.23 3.18 3.63 4.10 4.64 4.95 4.83 3.93 2.37 .58 .33 .23 .21 .26 .35 2.34 2.24 2.31 2.57 2.85 3.16 3.43 3.41 3.18 2.60 1.65 .48 .29 .18 .15 .15 .19 Mtg. Ht. 20 25 30 35 40 45 Ft. Candles for Iso-Footcandle Lines A 29.03 18.58 12.90 9.48 7.26 5.73 B 20.21 12.91 8.98 6.60 5.05 4.00 C 19.19 12.28 8.53 6.27 4.80 3.79 D 8.07 5.16 3.59 2.63 2.02 1.59 E 2.39 1.53 1.06 .78 .60 .47 F G .39 .25 .17 .13 .10 .08 H .17 .11 .08 .06 .04 .03 .04 .04 .03 .02 .02 .01 This report has been prepared in accordance with IES guides on testing procedures. It is representative of luminaires tested under standardized and stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field performance. ◊ Distance in terms of mounting height (i.e., ratio) of distance to height. Example: @ 15 foot/4.6 meters mounting height, 1 means 15 foot/4.6 meters; 2 means 30 foot/9.1 meters, etc. * Additional photometric charts available on request. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1357 Lighting 60 55 Super-Baymaster High Bay Luminaires V High Bay Luminaires for Mill Duty and Corrosive Atmospheres 150 W, 175 W, 250 W, 400 W or 1000 W HID lamps. Applications • For illumination of mills (pulp and paper), manufacturing, storage and other areas where corrosion, moisture or dust present severe problems. • CSA approved weatherproof (Encl. 3) with open reflector and dust-tight (Encl. 3 and 5) with enclosing lens. • Will operate safely in temperatures ranging from -40 °F/-40 °C to +149 °F/+65 °C ambient. Lighting Lighting: General Lighting — Area — High Bay Features • Corrosion resistant. All external surfaces of the ballast housing are coated with a heavy-duty epoxy-finish providing durability and resistant to both alkali and acidic atmospheric conditions. To suit specific atmospheric requirements, consult the factory for a suitable finish. • High efficiency reflectors (up to 76% with 1000 W MH lamps) and exceptionally long HID lamp life make Super-Baymaster luminaires unusually economical to own and operate. • The Baymaster reflector is a unique design that combines high efficiency with low glare in a compact size. • Super-Baymaster luminaires are furnished with open reflectors. For enclosed reflectors, clear or prismatic glass are available. • Pre-wired with high temperature fixture wire, these integral ballasted luminaires are supplied with dual-tap primary for 120 or 240 Volt lines or with 208, 277 or 347 Volt primary. Ballasts are highest quality, Class H insulated, CWA and CWI types, thermally isolated for cooler operating and long life. Grounding wire provided. • To protect the internal components of the luminaire from corrosive atmospheres all mating surfaces are gasketed. • Mogul base socket with spring loaded center contact and heavy gauge, screw shell with double lamp grips to prevent lamps from loosening due to vibration. • Installation is quick and easy: (1) lift ballast assembly onto the hanger hub and rotate 60° until sealed on hub (2) tighten locking nut (hand tight) to secure ballast assembly (3) make supply connections (90° wire) and replace wiring cover (4) snap reflector in place (5) install lamp Shown with optional lens: 1000 W Dimensions Height 20-7/8"/530.4 mm; 150-400 W MV/MH 19-11/16"/500.1 mm; 1000 W Width 16"/406.4 mm; 150-400 W 20"/508.0 mm; 1000 W Height 29"/736.6 mm; 150-400 W MV/MH 31"/787.4 mm; 1000 W Standard Materials • Reflector: aluminum • Sockets: porcelain Width 16"/406.4 mm; 150-400 W 20"/508.0 mm; 1000 W Standard Finishes • Screws: nickel plated brass • Housing: epoxy powder coated external surfaces Options • Quartz auxiliary: units are available with a pre-wired sensor circuit for automatically lighting a quartz auxiliary lamp when power dip or lamp failure extinguishes the main HID lamp. • Fuse kits: for grounded systems. • Lenses: clear or prismatic glass with heavy-duty, stainless steel clips to secure lens to reflector. • HPS units available with a pulse eliminator which effectively shuts down the ballast assembly when lamp fails. • Optional finishes may be ordered to suit specific environments in regular or specific colors. Certifications and Compliances • • • • UL Listed: E109938 UL Standard: 1598 CSA Certified: 009349 CSA Standard: C22.2 No. 250.0 Related Products • For power hook, fusing and other suspension accessories, see Fixture Hanger Accessories page. V CSA Certification only. 1358 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Super-Baymaster High Bay Luminaires V High Bay Luminaires for Mill Duty and Corrosive Atmospheres 150 W, 175 W, 250 W, 400 W or 1000 W HID lamps. Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide for GSB and GSS GSB 4 Series: GSB – SuperBaymaster GSS – SuperBaymaster Side by Side 1 A Beam Spread: 1 – Narrow (not for 1000 W) 2 – Medium 3 – Wide C Lamp Type: L – High Pressure Sodium H – Metal Halide M – Mercury Vapour P – Pulse Start Metal Halide Reflector: A – Complete with reflector Blank – Ballast assembly only MT E Voltage: MT – 120, 208, 240, 277V CWA TT – 120, 277, 347V CWA 208 – 208 Volts RB – Remote Ballast Ballast Type: C – CWI A – CWA Voltage: E – Provision for 250 W quartz emergency lamp (pre-wired) S – Provision for pulse eliminator F – Fuse for grounded systems (single pole) LC – Gasketed clear lens assembly LP – Gasketed prismatic lens assembly CR – Corrosion resistant epoxy paint on reflector exterior surface Lighting: General Lighting — Area — High Bay Wattage: 4 – 150 watt 5 – 175 watt 6 – 250 watt 7 – 400 watt 8 – 1000 watt L Accessories and Replacement Parts Description Catalog Number With relamp door. Zinc plated G-HB-20-G Safety Chain Secures ballast and reflector G-HB-7000-SC Wiring Kit Supplied with 3 feet of 600V –194 °F/90 °C 3-conductor no. 16 SOW cable and 3/4”/19.1 mm FHHM hook (shipped separately) Add Suffix: Lighting Wire Guard PWK Sockets Socket for Metal Halide and Mercury Vapor SPF-1004 Socket for High Pressure Sodium SPF-1001 V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1359 Super-Baymaster High Bay Luminaires V High Bay Luminaires for Mill Duty and Corrosive Atmospheres 150 W, 175 W, 250 W, 400 W or 1000 W HID lamps. Luminaire Performance Distribution 150 Watt Effic. S./M.H. 200 Watt Effic. S./M.H. 250 Watt Effic. S./M.H. 400 Watt Effic. S./M.H. 1000 Watt Effic. S./M.H. High Pressure Sodium Narrow 66.3% 0.5:1 66.4% 0.5:1 68.9% 0.5:1 66.4% 0.5:1 — — Medium 71.3% 1.1:1 71.4% 1.1:1 74.4% 1.7:1 71.4% 1.1:1 71.3% 0.7:1 Wide 73.3% 2.0:1 73.4% 2.0:1 78.0% 2.0:1 73.5% 2.0:1 74.4% 1.4:1 Effic. 175 Watt S./M.H. Effic. 250 Watt S./M.H. Effic. 400 Watt S./M.H. Effic. 1000 Watt S./M.H. Metal Halide Narrow 61.8% 0.4:1 66.7% 0.4:1 61.9% 0.6:1 — — Medium 66.1% 1.0:1 70.2% 1.0:1 66.3% 1.5:1 76.2% 1.1:1 Wide 66.1% 2.0:1 75.2% 2.2:1 66.3% 2.2:1 75.4% 2.5:1 Mercury Vapor Narrow 73.0% 0.8:1 53.2% 0.8:1 73.1% 1.2:1 — — Medium 73.5% 1.1:1 63.2% 1.1:1 73.6% 1.4:1 72.1% 1.5:1 Wide 74.2% 1.7:1 68.0% 1.7:1 74.2% 1.7:1 69.5% 1.8:1 Quick-Estimate Illumination Charts 1000 Watt High Pressure Sodium 1000 Watt Metal Halide 1000 Watt Mercury Vapor Lighting Lighting: General Lighting — Area — High Bay Distribution How to use Quick-Estimate Illumination Chart 1. Refer to “Quick-Estimate Chart” for the lamp to be used. 2. Determine “room size” of area to be lighted. “Small Room” is 2500 Sq. Ft./232.3 Sq. M. or less. “Medium Room” is 2500 Sq. M./232.3 Sq. M. thru 10,000 Sq. Ft./929.0 Sq. M. “Large Room” is 10,000 Sq. Ft./929.0 Sq.M. or more. 3. Find level of light (footcandles) required in vertical column of figures at left of chart. Then follow horizontal line (real or interpolated) to right until it intersects with “Arc” of selected “room size.” Come directly down from point of intersection to horizontal line of number “Square Feet Per Luminaire”. The resulting number (real or interpolated) is the “number of square feet” one Appleton Baymaster will illuminate to the selected average maintained footcandle level when mounted in conjunction with other units in the high bay installation. 4. Divide number of total square feet in project by “number of square feet per luminaire” to get number of units required. 5. Take square root of resulting “number of square feet per luminaire” number to determine spacing between units. S./M.H.: Spacing to Mounting Height. Photometric charts available on request. V CSA Certification only. 1360 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster 1000™ High Bay Luminaires 1000 W HPS; 1000 W MH; 750 W, 1000 W, 1500 W PS-52 Incandescent. Applications • Ideal for aircraft hangars, machine shops, foundries and other large-area working environments. Features Complete Fixture Standard Materials • • • • • Ballast: finned, aluminum Sockets: porcelain, nickel plated center contact Screws: brass Reflectors: aluminum Locks: stainless steel Lighting: General Lighting — Area — High Bay • Standard Baymaster fixtures operate in high ambient temperatures. • High efficiency (up to 76% with 1000 W metal halide lamps) with exceptionally long lamp life makes these Baymaster fixtures unusually economical to own and operate. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Mogul base socket with spring loaded center contact and heavy gauge, screw shell with double lamp grips to prevent lamps from loosening due to vibration. • The Baymaster reflector is a unique design that combines high efficiency with low glare in a compact size. • Reflector installs and adjusts to wide or medium distribution (without tools) by repositioning spring locks. • Installation is quick and easy: (1) lift ballast assembly onto the hanger hub and rotate 60° until seated on hub (2) tighten locking nut (hand tight) to secure ballast assembly (3) make supply connections (194 °F/90 °C wire) and replace wiring cover (4) snap reflector in place (5) install lamp • Open-top reflector design keeps reflector clean because of thermal barrier and chimney effect, and provides up-light to relieve contrast. Ballast Housing Assembly Dimensions Ballast: corrosion polyester Sockets: nickel plated center contact Screws: nickel plated Reflectors: natural finish 26.81”/681.0 mm Min. — 29”/736.6 mm Max. • • • • Options • Units are available with a pre-wired sensor circuit for automatically lighting an auxiliary safety lamp in case a power dip or lamp failure extinguishes the HID lamp. Certifications and Compliances • UL Listed: E109438 • UL Standard: 1598 (supersedes UL Standard 1572) • CSA Certified: LR9349 Related Products • For power hook, fusing and other suspension accessories, see Fixture Hanger Accessories page. Lighting Standard Finishes 20.0"/508.0 mm Standard Baymaster 1000 fixtures operate efficiently in high 131 °F/55 °C ambient temperatures. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1361 Baymaster 1000™ High Bay Luminaires 1000 W HPS; 1000 W MH; 750 W, 1000 W, 1500 W PS-52 Incandescent. Pendant Mounting (3/4”) Lamp Type Catalog Number Complete Assembly ② Ballast Housing Assembly Voltage For High Pressure Sodium Lamps — Complete with ballast G-HB81AL-MT G-HB811L-MT G-HB81AL-TT V G-HB811L-TT V 480 V G-HB81AL-48 G-HB811L-48 1000 W MH 120/208/240/277 V G-HB81AH-MT G-HB811H-MT 1000 W MH 120/277/347 V 1000 W MH 480 V 1000 W HPS 120/208/240/277 V 1000 W HPS 120/277/347 V 1000 W HPS Lighting Lighting: General Lighting — Area — High Bay For Metal Halide Lamps — Complete with ballast G-HB81AH-TT V G-HB811H-TT V G-HB81AH-48 G-HB81A1H-48 750 W, 1000 W or 1500 W PS-52 Incandescent G-H81AM-RB G-H811M-RB 1000 W High Pressure Sodium G-H81AL-RB G-H811L-RB 1000 W Metal Halide G-H81AH-RB G-H811H-RB For Incandescent Lamps or HID Lamps — Ballast Remote — Ballast not included Electrical Specifications Line Volts 120 High Pressure Sodium — C.W.A. Ballast Amps — 1000 W Start Oper. Total Watts 6.35 9.50 Metal Halide — C.W.A. Ballast Amps — 1000 W Start Oper. Total Watts 1100 8.00 9.20 1080 208 3.80 5.50 1100 4.60 5.30 1080 240 3.20 4.80 1100 4.00 4.60 1080 277 2.75 4.20 1100 3.50 4.00 1080 347 2.80 3.00 1100 2.00 3.20 1080 480 1.80 2.45 1100 2.00 2.30 1080 Luminaire Performance 1000 W Distribution Effic. S./M.H. High Pressure Sodium Medium 71.3% 7:1 Wide 74.4% 1.4:1 Medium 76.2% 1.1:1 Wide 75.4% 2.5:1 Metal Halide 1000 W MH Lamps: some manufacturers recommend that their lamps be operated in enclosed units only—select enclosing lens from list of accessories. Contact your electrical lamp distributor or lamp manufacturer for the latest safety information. Add suffix -E to catalog number if provision for quartz emergency lamp is desired (lamp not included). Furnished with socket installed and pre-wired. Supplied complete with C.W.A. Ballast. For 208, 240, 480 or 600 V C.W.I. applications, change the -TT suffix to -C2, -C3, -C6 or -C7 as required. V C.W.A. is Constant Wattage Autotransformer. Reflector adjusts for Medium to Wide distribution without tools. S./M.H.: Spacing to Mounting Height. V CSA Certification only. 1362 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Baymaster 1000™ High Bay Luminaires Accessories and Replacement Parts 1000 W HPS; 1000 W MH; 750 W, 1000 W, 1500 W PS-52 Incandescent. Description Catalog Number ➊ Wire Guard Zinc plated. G-HB-20-NG 1.0"/ 25.4 mm 21.0"/ 533.4 mm Hinged Lens — Complete with Socket Schroud Thermal shock and impact resistant, clear glass lens. G-HB-20-NL Thermal shock and impact resistant, Corning-73 lens. G-HB-20-NL3 Aluminum (closes off reflector). G-HB7000-SS 20.06"/ 509.5 mm Lighting: General Lighting — Area — High Bay 1.0"/ 25.4 mm Socket Shroud 2.25"/ 57.2 mm 3.0"/ 76.2 mm 2.88"/ 73.2 mm 6.0"/ 152.4 mm Safety Cable (not shown) G-HB7000-SC Reflector G-8AW Supplied with 3 feet of 16/3 SOOW cable and FHHM-75SS cast safety hook PWK V Lighting Reflector only. Wiring Kit (not shown) ➊ Other accessories available for 20”/508 mm 1000 W Baymasters include emergency lighting circuits, unit fuses, and special hanger hardware. Contact your local sales representative. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1363 Baymaster 1000™ High Bay Luminaires Quick Estimate Illumination Charts * 1000 W HPS; 1000 W MH; 750 W, 1000 W, 1500 W PS-52 Incandescent. 1000 Watt Metal Halide How to use Quick-Estimate Illumination Chart 1. Refer to “Quick-Estimate Illumination Chart” for the lamp type and wattage to be used. 2. Determine “room size” of area to be lighted. “Small Room” is 2500 Sq. Ft. or less. “Medium Room” is 2500 Sq. Ft./232.3 Sq. M. thru 10,000 Sq. Ft./929.0 Sq. M. A “Large Room” is 10,000 Sq. Ft./929.0 Sq. M. or more. 3. Find level of light (footcandles) required in vertical column of figures at left of chart. Then follow horizontal line (real or interpolated) to right until it intersects with “Arc” of selected “room size.” Come directly down from point of intersection to horizontal line of number “Square Feet Per Luminaire.” The resulting number (real or interpolated) is the “number of square feet” one Appleton Baymaster will illuminate to the selected average maintained footcandle level when mounted in conjunction with other units in the high bay installation. 4. Divide number of total square feet in project by “number of square feet per luminaire” to get number of units required. 5. Take square root of resulting “number of square feet per luminaire” number to determine spacing between units. Lighting Lighting: General Lighting — Area — High Bay 1000 Watt High Pressure Sodium * Photometric charts available on request. 1364 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumenmaster 250™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 150 W, 250 W HPS; 175 W, 200 W, 250 W PSMH, 175 W, 250 W MH V. Suitable for use in damp locations Applications • Energy-efficient, low-glare illumination for manufacturing, storage and other indoor areas where low bay luminaires are required. Can be mounted as low as 8 feet/2.4 meters from work plane. • Suitable for use in damp locations. • Operates safely in ambients as high as 104 °F/40 °C. • Applications involving airborne particulates (such as carbon black, pigments, etc.) should be pre-evaluated and approved by Appleton prior to ordering. Features Dimensions /8"/ 12-3 mm 314.4 6-1/4"/ 158.8 mm 26-3/4"/ 679.5 mm 16.0"/ 406.4 mm Standard Materials • • • • • Lighting: General Lighting — Area — Low Bay • High efficiency (up to 74.6% with 250 W high pressure sodium lamp) combined with long lamp life, ensures the most economical operation. • Two-to-one vertical-to-horizontal footcandles provides effective, efficient illumination of vertical surfaces. • Reflector/refractor optical assembly is computer designed for uniform, wide light distribution with low glare. • Injection-molded prismatic refractor lens is 100% virgin acrylic. Minimum thickness is 3/16”/4.8mm. • Ruggedly built, attractively styled, low-profile design. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Capable of starting and operating the lamp in temperatures as low as -20 °F/-28.9 °C for pulse start metal halide lamps, -40 °F/-40 °F for high pressure sodium lamps. • Mogul base socket with spring loaded center contact and heavy gauge, screw shell with double lamp grips to prevent lamps from loosening due to vibration. • Installation is quick and easy: (1) mount junction box to 3/4”/19.1 mm conduit (2) slide ballast onto junction box (3) make connections (4) install lamp (5) snap reflector in place Gasket: silicone rubber Reflector: aluminum Ballast housing: finned, coppefree (4/10 of 1% max) aluminum Sockets: porcelain Screws: brass 20.0"/ 508.0 mm Standard Finishes • • • • Reflector: natural finish Ballast: white powder coat polyester Sockets: nickel plated center contact Screws: nickel plated brass • Units are available with a pre-wired sensor circuit for automatically lighting an auxiliary safety lamp in case a power dip or lamp failure extinguishes the HID lamp. Related Products • For power hook, fusing and other suspension accessories see Fixture Hanger Accessories. Certifications and Compliances • UL Listed: E85142 • UL Standard: 1598 • CSA Certified: LR9349 V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1365 Lighting Options Lumenmaster 250™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 150 W, 250 W HPS; 175 W, 200 W, 250 W PSMH, 175 W, 250 W MH V. Suitable for use in damp locations Electrical Specifications High Pressure Sodium — All ballasts are C.W.A. type, except 150 W HPS which is HX-Auto Lighting: General Lighting — Area — Low Bay 150 W 250 W Line Volts Start Oper. Total Watts Start Oper. Total Watts 120 2.00 1.70 188 2.00 2.50 295 208 1.15 .95 188 1.20 1.50 295 240 1.00 .85 188 1.00 1.30 295 277 .85 .72 188 .85 1.10 295 347 V 0.52 0.56 188 0.60 0.93 295 480 .50 .47 189 .40 .65 295 Line Volts Pulse Start Metal Halide — Super C.W.A. Ballast Amps 175 W 200 W Total Total Start Oper. Watts Start Oper. Watts Start Oper. Total Watts 120 .90 1.78 199 2.10 2.00 235 1.90 2.50 288 208 .50 1.08 199 1.15 1.25 235 1.10 1.45 288 240 .35 .89 199 1.10 1.00 235 .96 1.25 288 277 .30 .76 199 .75 .85 235 .85 1.10 288 347 V 0.25 0.65 199 .25 .70 232 0.62 0.90 288 480 .25 .50 213 .35 .50 237 .46 .60 285 Metal Halide V — C.W.A. Ballast Amps 175 W Total Oper. Watts 250 W 250 W Start Oper. Total Watts 213 1.2 2.6 295 1.1 213 .65 1.5 295 .90 213 .60 1.3 295 .55 .78 213 .50 1.12 295 0.50 0.65 213 0.80 0.90 295 Line Volts Start 120 1.3 1.8 208 .75 240 .65 277 347 Luminaire Performance 150 Watt S./M.H. Effic. Lighting Distribution 175 Watt S./M.H. Effic. 200 Watt S./M.H. Effic. 250 Watt S./M.H. Effic. High Pressure Sodium 70.0% 3.2:1 — — — — 74.6% 3.1:1 Pulse Start Metal Halide — — 65.9% 2.7:1 53.1% 3.1:1 67.2% 3.0:1 — — 62.3% 2.6:1 — — 64.7% 3.0:1 Metal Halide Reflector adjusts for medium to wide distribution without tools. S./M.H.: Spacing to Mounting Height. V CSA Certified only. 1366 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumenmaster 250™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 150 W, 250 W HPS; 175 W, 200 W, 250 W PSMH, 175 W, 250 W MH V. Suitable for use in damp locations Pendant Mounting Lamp Type Voltage Catalog Number Complete with Reflector/Refractor Assembly and Ballast Ballast Housing Assembly For High Pressure Sodium Lamps 150 W HPS 120/208/240/277 V 150 W HPS 120/277/347 V G-LM41AL-MT G-LM411L-MT G-LM41AL-TT V④ G-LM411L-TT V④ 150 W HPS 480 V G-LM41AL-48 G-LM411L-48 250 W HPS 120/208/240/277 V G-LM61AL-MT G-LM611L-MT 250 W HPS 120/277/347 V G-LM61AL-TT V④ G-LM611L-TT V④ 250 W HPS 480 V G-LM61AL-48 G-LM611L-48 175 W PSMH 120/208/240/277 V G-LM51AP-MT G-LM511P-MT 175 W PSMH 120/277/347 V G-LM51AP-TT V④ G-LM511P-TT V④ G-LM51AP-48 G-LM511P-48 G-LM201AP-MT G-LM2011P-MT For Pulse Start Metal Halide Lamps 480 V 120/208/240/277 V 200 W PSMH 120/277/347 V G-LM201AP-TT V④ G-LM2011P-TT V④ 200 W PSMH 480 V G-LM201AP-48 G-LM2011P-48 250 W PSMH 120/208/240/277 V G-LM61AP-MT G-LM611P-MT 250 W PSMH 120/277/347 V G-LM61AP-TT V④ G-LM611P-TT V④ 250 W PSMH 480 V G-LM61AP-48 G-LM611P-48 Lighting: General Lighting — Area — Low Bay 175 W PSMH 200 W PSMH For Metal Halide Lamps V 175 W MH 120/208/240/277 V G-LM51AH-MT V G-LM511H-MT V 175 W MH 120/277/347 V G-LM51AH-TT V④ G-LM511H-TT V④ 250 W MH 120/208/240/277 V G-LM61AH-MT V G-LM611H-MT V 250 W MH 120/277/347 V G-LM61AH-TT V④ G-LM611H-TT V④ Lighting For 150 W HPS fixtures furnished with Instant Hot Restart, add suffix -R to catalog number. Add Suffix -E to catalog number if provision for quartz emergency lamp is desired (lamp not included). Furnished with socket installed and pre-wired. To order fixture complete with lamp, add suffix -L to catalog number. ④ Supplied complete with CWA Ballast. For 208, 240, 480 or 600 V CWI applications, change the -TT suffix to -C2, -C3, -C6 or -C7 as required. V V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1367 Lumenmaster 250™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 150 W, 250 W HPS; 175 W, 200 W, 250 W PSMH, 175 W, 250 W MH V. Accessories and Replacement Parts Type Description Catalog Number Fuseholder with 9” wire leads G-F10 Zinc plated. "/ 16 m 5/ m 1- 3.3 3 Safety Cable (not shown) G-HB7000-SC Optic Assembly Optic Assembly only. G-LM20 Supplied with 3 feet of 16/3 SOOW cable and FHHM-75SS cast safety hook PWK V Lighting Lighting: General Lighting — Area — Low Bay Wiring Kit (not shown) V CSA Certification only. 1368 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumenmaster 250™ Low Bay HID Prismatic Luminaires Integrally Ballasted. Quick-Estimate Illumination Chart * Integrally Ballasted. 150 W, 250 W HPS; 175 W, 200 W, 250 W PSMH. 250 Watt High Pressure Sodium 150 Watt High Pressure Sodium 250 Watt Pulse Start Metal Halide 175 Watt Pulse Start Metal Halide Lighting: General Lighting — Area — Low Bay How to use Quick-Estimate Illumination Chart 1. Refer to “Quick-Estimate Illumination Chart” for the lamp type and wattage to be used. 2. Determine “room size” of area to be lighted. “Small Room” is 2500 Sq. Ft./232.3 Sq. M. or less. “Medium Room” is 2500 Sq. Ft./232.3 Sq. M. thru 10,000 Sq. Ft./929.0 Sq. M. “Large Room” is 10,000 Sq. Ft./929.0 Sq.M. or more. 3. Find level of light (footcandles) required in vertical column of figures at left of chart. Then follow horizontal line (real or interpolated) to right until it intersects with “Arc” of selected “room size.” Come directly down from point of intersection to horizontal line of number “Square Feet Per Luminaire.” The resulting number (real or interpolated) is the “number of square feet” one Appleton will illuminate to the selected average maintained footcandle level when mounted in conjunction with other units in the high bay installation. 4. Divide number of total square feet in project by “number of square feet per luminaire” to get number of units required. 5. Take square root of resulting “number of square feet per luminaire” number to determine spacing between units. Lighting * Photometric charts available on request. Consult your local sales representative for pulse start metal halide. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1369 Lumenmaster 400™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 400 W, 250 W HPS; 320 W, 400 W PSMH. 400 W MH V. Suitable for use in damp locations Applications • Energy-efficient, low-glare illumination for manufacturing, storage and other indoor areas where low bay luminaires are required. Can be mounted as low as 8 feet/2.4 meters from work plane. • Suitable for use in damp locations. • Operates safely in ambients as high as 104 °F/40 °C • Applications involving airborne particulates (such as carbon black, pigments, etc.) should be pre-evaluated and approved by Appleton prior to ordering. Lighting: General Lighting — Area — Low Bay Features • High efficiency (up to 81.6% with 400 W high pressure sodium lamp) combined with long lamp life, ensures the most economical operation. • Two-to-one vertical-to-horizontal footcandles provides effective, efficient illumination of vertical surfaces. • Reflector/refractor optical assembly is computer designed for uniform, wide light distribution with low glare. • Injection-molded prismatic refractor lens is 100% virgin acrylic. Minimum thickness is 3/16”/4.8 mm. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Capable of starting and operating the lamp in temperatures as low as -20 °F/-28.9 °C for pulse start metal halide lamps, -40 °F/-40 °C for high pressure sodium lamps. • Mogul base sockets with spring loaded center contact and heavy gauge screw shell with double lamp grips to prevent lamps from loosening due to vibration. • Installation is quick and easy: (1) mount junction box to 3/4”/4.8 mm conduit (2) slide ballast onto junction box (3) make connections (4) install lamp (5) snap reflector in place 6.25"/ 158.8 mm 12.38"/ 314.5 mm 26.0"/660.4 mm Standard Materials • • • • • 15.25"/ 387.4 mm Gasket: silicone rubber Reflector: aluminum Ballast: finned, copperfree (4/10 of 1% max.) aluminum Sockets: heavy duty porcelain Screws: brass 30.0"/ 762.0 mm Standard Finishes • • • • Reflector: natural finish Ballast: white powder coated polyester Sockets: nickel plated center contact Screws: nickel plated Options Lighting Dimensions • Units are available with a pre-wired sensor circuit for automatically lighting an auxiliary safety lamp in case a power dip or lamp failure extinguishes the HID lamp. Related Products • For power hook, fusing and other suspension accessories, see Fixture Hanger Accessories page. Certifications and Compliances • UL Listed: E85142 • UL Standard: 1598 • CSA Certified: LR9349 V CSA Certification only. 1370 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumenmaster 400™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 400 W, 250 W HPS; 320 W, 400 W PSMH. 400 W MH V. Suitable for use in damp locations Pendant Mounting Lamp Type Voltage Catalog Number Complete with Reflector/Refractor Assembly and Ballast Ballast Housing Assembly For High Pressure Sodium Lamps 250 W HPS 120/208/240/277 V 250 W HPS 120/277/347 V 250 W HPS 480 V 400 W HPS 120/208/240/277 V 400 W HPS 120/277/347 V 400 W HPS 480 V G-LM61BL-MT G-LM611L-MT G-LM61BL-TT V④ G-LM611L-TT V④ G-LM61BL-48 G-LM611L-48 G-LM71BL-MT G-LM711L-MT G-LM71BL-TT V④ G-LM711L-TT V④ G-LM71BL-48 G-LM711L-48 G-LM321BP-MT G-LM3211P-MT For Pulse Start Metal Halide Lamps 320 W PSMH 120/208/240/277 V 320 W PSMH 120/277/347 V 320 W PSMH 480 V 400 W PSMH 120/208/240/277 V 400 W PSMH 400 W PSMH G-LM321BP-TT V④ G-LM3211P-TT V④ G-LM321BP-48 G-LM3211P-48 G-LM71BP-TT V④ G-LM711P-MT 120/277/347 V G-LM71BP-MT G-LM711P-TT V④ 480 V G-LM71BP-48 G-LM711P-48 400 W MH 120/208/240/277 V G-LM71BH-MT V G-LM711H-MT V 400 W MH 120/277/347 V G-LM71BH-TT V④ G-LM711H-TT V④ Lighting: General Lighting — Area — Low Bay For Metal Halide Lamps V Accessories and Replacement Parts Type Description Catalog Number Fuseholder with 9” wire leads Zinc plated. G-F10 "/ 16 m 5/ m 1- 3.3 3 Safety Cable (not shown) G-HB7000-SC Optic Assembly G-LM30 Lighting Optic Assembly only. Wiring Kit (not shown) Supplied with 3 feet of 16/3 SOOW cable and FHHM-75SS cast safety hook PWK V To order fixture complete with lamp, add suffix -L to catalog number. Add Suffix -E to catalog number if provision for quartz emergency lamp is desired (lamp not included). Furnished with socket installed and pre-wired. For power hook, fusing and other suspension accessories, see Fixture Hanger Accessories. ④ Supplied complete with CWA Ballast. For 208, 240, 480 or 600 V CWI applications, change the -TT suffix to -C2, -C3, -C6 or -C7 as required. V V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1371 Lumenmaster 400™ Low Bay HID Prismatic Luminaires Integrally Ballasted. 400 W, 250 W HPS; 320 W, 400 W PSMH. 400 W MH V. Suitable for use in damp locations Electrical Specifications High Pressure Sodium — All ballasts are C.W.A. type, except 150 W HPS which is HX-Auto Line Volts Start 250 W Oper. 120 2.00 2.50 Total Watts Start 400 W Oper. Total Watts 295 3.30 3.80 465 208 1.20 1.50 295 1.80 2.20 465 240 1.00 1.30 295 1.60 1.90 465 277 .85 1.10 295 1.40 1.70 465 347 V 0.60 0.93 295 1.00 1.32 465 480 .40 .65 295 .80 1.00 465 Pulse Start Metal Halide — Super C.W.A. Ballast Amps 320 W Start Oper. Total Watts Start 400 W Oper. Total Watts 4.00 454 Line Volts Lighting: General Lighting — Area — Low Bay 120 2.60 3.25 368 3.50 208 1.50 1.90 368 2.00 2.30 454 240 1.30 1.65 368 1.75 2.00 454 277 1.15 1.40 368 1.50 1.75 454 347 V 0.70 1.10 368 1.10 1.35 454 480 .60 .80 368 .90 1.00 454 Line Volts Start 400 W Oper. Total Watts 120 3.25 4.0 458 208 1.9 2.3 458 240 1.65 2.0 458 Metal Halide V — C.W.A. Ballast Amps 277 1.4 1.75 458 347 1.20 1.40 458 Luminaire Performance Lighting Distribution Effic. 250 Watt S./M.H. Effic. 320 Watt S./M.H. Effic. 400 Watt S./M.H. High Pressure Sodium Wide 81.7% 2.0:1 — — 81.6% 2.0:1 — — 63.7% 2.3:1 63.2% 2.3:1 — — — — 81.4% 1.7:1 Pulse Start Metal Halide Wide Metal Halide V Wide V CSA Certified only. 1372 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lumenmaster 400™ Low Bay HID Prismatic Luminaires Integrally Ballasted. Quick Estimate Illumination Charts * Integrally Ballasted. 400 W, 250 W HPS; 320 W, 400 W PSMH. 400 W MH V. 250 Watt High Pressure Sodium 400 Watt High Pressure Sodium 320 Watt Pulse Start Metal Halide 400 Watt Pulse Start Metal Halide * Photometric charts available on request. Consult your local sales representative for pulse start metal halide. Consult your local sales representative for performance with 400 W mercury vapor lamps. S./M.H.: Spacing to Mounting Height. V CSA Certified only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1373 Lighting Candlepower Distribution of 400 W HPS Luminaire — Closed Bottom Acrylic — All data based on clear, mogul base lamp Fixture Efficiency: 81.6% Zone Candlepower Zone Candlepower 5 7861 95 667 15 7806 105 328 25 9774 115 184 35 11404 125 82 45 10612 135 32 55 7257 145 20 65 4998 155 0 75 3214 165 0 85 1625 175 0 Lighting: General Lighting — Area — Low Bay How to use Quick-Estimate Illumination Chart 1. Refer to “Quick-Estimate Illumination Chart” for the lamp type and wattage to be used. 2. Determine “room size” of area to be lighted. “Small Room” is 2500 Sq. Ft./232.3 Sq. M. or less. “Medium Room” is 2500 Sq. Ft./232.3 Sq. M. thru 10,000 Sq. Ft./929.0 Sq. M. “Large Room” is 10,000 Sq. Ft./929.0 Sq. M. or more. 3. Find level of light (footcandles) required in vertical column of figures at left of chart. Then follow horizontal line (real or interpolated) to right until it intersects with “Arc” of selected “room size.” Come directly down from point of intersection to horizontal line of number “Square Feet Per Luminaire.” The resulting number (real or interpolated) is the “number of square feet” one Appleton will illuminate to the selected average maintained footcandle level when mounted in conjunction with other units in the high bay installation. 4. Divide number of total square feet in project by “number of square feet per luminaire” to get number of units required. 5. Take square root of resulting “number of square feet per luminaire” number to determine spacing between units. Fixture Hanger Accessories Baymaster, Lumenmaster, Super-Baymaster Catalog Number Voltage Fits Hubbell Plug No. Pendant Feed-Thru GHPHP Pendant with one 3/4”/19.1 mm hub, GHPHT with two 3/4”/19.1 mm hubs Furnished with assembled FS box, EFHM safety lock, receptacle and steel cover. Supports 200 lbs/90.7 kgs. 8.50"/ 215.9 mm 6.06"/ 153.9 mm 120 L5-15P GHPHP12 GHPHT12 208, 240 L6-15P GHPHP24 GHPHT24 277 L7-15P GHPHP27 GHPHT27 480 L8-20P GHPHP48 GHPHT48 Voltage Fits Hubbell Receptacle No. Cord Length Ft/M Catalog Number 2/.6 3/.9 4/1.2 2/.6 3.9 4/1.2 2/.6 3/.9 4/1.2 2/.6 3/.9 4/1.2 G-HCPL-2-12 G-HCPL-3-12 G-HCPL-4-12 G-HCPL-2-24 G-HCPL-3-24 G-HCPL-4-24 G-HCPL-2-27 G-HCPL-3-27 G-HCPL-4-27 G-HCPL-2-48 G-HCPL-3-48 G-HCPL-4-48 Catalog Number Lighting: General Lighting — Area — Low Bay Matching Cord Sets for above Receptacle Hangers 120 L5-15R 208, 240 L6-15R 277 L7-15R 480 L8-20R Size (Inches) Length (A) Inch/Millimeters Support Wt. Lbs/Kgs 3.88/98.6 4.13/104.9 350/158.8 FHLM-50 FHLM-75 350/158.8 FHLF-75 3.88/98.6 4.13/104.9 200/90.7 FHHM-50 FHHM-75 3.25/82.6 3.25/82.6 200/90.7 FHHF-50 FHHF-75 FH—Hanger Loops With 5/8”/16.0 mm wire opening FHLM—Male 1/2 3/4 FHLF—Female 1/2 3/4 FHLF-50 3.25/82.6 3.25/82.6 FH—Hanger Hooks With 5/8”/16.0 mm wire opening, 3/8”/19.1 mm jaw opening FHHM—Male Lighting 1/2 3/4 FHHF—Female 1/2 3/4 Fuse and Cartridge — Cartridges are furnished complete with two 10”/254 mm-long high temperature wire leads and 600 Volt fuse 1374 6 Amp G-F6 10 Amp G-F10 20 Amp G-F20 30 Amp G-F30 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Quartzlite™ 50 Floodlight 300 W thru 500 W quartz tungsten halogen. Applications • Recreation — fun after dark with illuminated swimming pools, basketball, and other court and play areas. • Beauty — illuminate your home, patio and garden to maximize the beauty of your home. • Safety — eliminate night-time hazards with lighting on outdoor stairways, walkways, and driveways. • Security — illuminate backyards, entrance ways and other areas for protection against intruders. • Saves energy. Features • Uses standard household current (120 Volts, 120 Vac). • Strong, compact, lightweight fixture can be installed anywhere outdoors. • Bright anodized aluminum parabolic reflector for efficient light distribution. • Lamp held securely in spring-loaded porcelain socket for positive contact. • Flowing lines for an attractive appearance blend with any architectural style. • Reinforcing rib keeps lens door flat against housing. • Door hinges cast permanently as part of the housing securely anchor door, yet entire door can be removed if desired. • Easy to install 1/2” NPT thread with locknut. • Attaches to standard electrical box cover plate (not furnished). Only two wires plus ground to connect. Dimensions 9.0"/ 228.6 mm 7.75"/196.9 mm 2.13"/ 54.1 mm Standard Materials • • • • 5.63"/143.0 mm 0.5"/12.7 mm Housing and lens door: single pressure — cast aluminum piece Lens: heat/shatter resistant glass Slotted/hex screw: Adjustable swivel mount Certifications and Compliances Description NEMA Type Lumens Max. Candlepower Average Max. Catalog Number With Lamp Without Lamp (Illumination based on use of T-3 Quartz Tungsten Halogen Lamps) Wide Beam 5x5 6,846 Mounting Angle Mounting Height ft/m Area Illuminated Width x Depth ft/m 8,416 7,685 G-50-5-L120 G-50-5 Mounting Angle Mounting Height ft/m Area Illuminated Width x Depth ft/m 12/3.7 70x70/ 21.3x21.3 12/3.7 80x75/ 24.4x22.9 16/4.9 80x80/ 24.4x24.4 16/4.9 90’x85’ 27.4x25.9 20/6.1 100x80/ 30.5x24.4 20/6.1 100’x90’ 30.5x27.4 Lighting: General Lighting — Area — Floodlights • UL Listed: E22558 • UL Standard: 1598 • CSA Certified: LR9349 Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1375 Quartzlite™ 500/1500 Floodlight 300 W thru 1500 W quartz tungsten halogen lamps. Applications • Heavy duty, weatherproof floodlights for industrial, commercial, and sports applications where efficient, controlled distribution is required. Widely used for: — Sports and amusement areas — Sign lighting — Parking lots — Accent lighting — Security lighting — Similar applications Quartzlite™ 500 Projected Area: 1.2 Sq. Ft/0.14 Sq. M Features • Choice of mounting fittings and accessories to meet installation needs. • Rugged, compact, lightweight design; easy to install and maintain. Cool operating, long lamp life. • Quartzlite 500 uses 500 W or 300 W 120 Volts or 130V T-3 quartz tungsten halogen lamps with exceptional efficiency and economy. • Quartzlite 1500 uses T-3 quartz tungsten halogen lamps. Available for use with 1500 W lamps for 208, 220, 240, and 277 Volt operation; for 1250 W lamps, 208 Volt operation; and for 1000 W lamps, 220 or 240 Volts operation. • 1500 W unit housing has integral fins for maximum heat dissipation. Hinged door has thermal shock and impact resistant glass lens. Dimensions 9.88"/ 251 mm /27 75" 3.1 mm Lighting: General Lighting — Area — Floodlights 4.5"/ 114.3 mm 10. Lighting 4.75"/ 120.7 mm 15.25"/387.4 mm Standard Materials • Housing and lens door: rugged, corrosion resistant, one-piece pressure-cast aluminum • Hex-head bolts: two 5/16"/8.0 mm • Thermal shock and impact resistant glass • Gasket: heavy, one-piece silicone rubber to resist high temperatures • Reflector: precision parabolic design, natural finish aluminum for maximum efficiency • Swivel mounting arm: heavy duty, degree-marked swivel mounting arm with 3/4”/19.1 mm pipe thread and locknut • UL Listed: E22558 • UL Standard: 1598 • CSA Certified: LR9349 Beam Spread Horizontal Vertical 2.75"/69.9 mm Certifications and Compliances • Housing and hinged lens door: architectural bronze polyester finish NEMA Type 11"/279.4 mm 9.5"/ 241.3 mm Standard Finishes Description Quartzlite™ 1500 Projected Area: 0.7 Sq. Ft/0.07 Sq. M Lumens Candlepower Average Maximum Maximum Catalog Number With Lamp Without Lamp (Illumination based on use of T-3 Quartz tungsten Halogen lamps) Quartzlite™ 1500 Wide Beam 6x6 128.0° 103.0° 23,218 18,689 17,564 Quartzlite 500 Wide 5x5 95° 92° 6,846 8,416 7,685 G-1500L240 ➊ G-1500L277 ➋ G-1500-➌ ™ G-500-5-L130 ➍ G-500-5 ➎ ➊ Furnished with 1500 W lamps for 240 V line operation. ➋ Furnished with 1500 W lamps for 277 V line operation. ➌ For 1500 W lamps for 208, 220, 240 or 277 V line operation; 1250 W lamps for 208 V line operation; 1000 W lamps for 220 or 240 V line operation. ➍ Furnished with 500 W lamps for 120 or 130 V line operation. ➎ For 300 W or 500 W lamps for 120 or 130 V line operation. 1376 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Quartzlite™ 500/1500 Floodlight Mounting Fittings and Accessories 300 W thru 1500 W quartz tungsten halogen lamps. Description Catalog Number Crossarm Mount and Wiring Compartment 2.63"/ 66.8 mm 1.88"/ 47.8 mm 3.0"/ 76.2 mm 180° horizontal position scale, mounts with bolt (not furnished). Aluminum with architectural bronze polyester finish. Includes cord grip. G-6028N Mounts on 1” to 2”/25.4 to 50.8 mm pipe, vertical or horizontal, or mounts on flat surfaces (used with G-6028N). Includes U-bolts and bolt for G-6028N. Malleable iron, zinc plated, chromate sealed, architectural bronze polyester finish. G-VB101 500 W GMM4V 500 W G-506 Extruded aluminum, with slide-off cover. Has six 3/4”/19.1 mm threaded holes, with three close-up plugs. Mounts five 500 W or four 1500 W Quartzlites. Mounts on 3/4”/19.1 mm conduit or G-810 poletop fitter. G-6017 Cast aluminum, for mounting to 1-1/2” or 2”/38.1 to 50.8 mm pip Has setscrews for securing to pole, 3/4”/19.1mm tapped top hub to accommodate Quartzlite or Channel Crossarm above. Architectural bronze polyester finish. G-810 3.88"/ 98.6 mm Pipe or Wall Mount Bracket 4.0"/ 101.6 mm 3.75"/ 95.3 mm 4.25"/108.0 mm Top Visor 5.0"/ 127 mm 2.5"/ 63.5 mm 8.63"/ 219.2 mm Wire Guard Channel Crossarm 2.75"/ 69.9 mm 2.5"/63.5 mm Lighting: General Lighting — Area — Floodlights 26.0"/ 660.4 mm Poletop Fitter 3.0"/ 76.2 mm 2.25"/ 57.2 mm Replacement Lens Frame Assembly 500 W G5005RFL 1500 W G1500RFL 500 W 601252002 1500 W 601252001 Replacement Lens Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1377 Quartzlite™ 500/1500 Floodlights Quick — Estimate Illumination Table * 300 W thru 1500 W quartz tungsten halogen lamps. Quartzlite™ 500 Beam Spread Lighting: General Lighting — Area — Floodlights Wide D=10 Feet/3.0 Meters D=20 Feet/6.1 Meters B L W X A B L W X A B L W X 77 44 24/ 7.3 19/ 5.8 10/ 3.0 19 11 48/ 14.6 38/ 11.6 21/ 6.4 5 3 96/ 29.3 77/ 23.5 42/ 12.8 D=80 Feet/24.4 Meters A Wide D=40 Feet Spread/12.2 Meters Spread A 1.2 D=100 Feet/30.5 Meters B L W X .7 192/ 58.5 153/ 46.6 83/ 25.3 A .8 D=200 Feet/71.0 Meters B L W X .4 240/ 73.2 190/ 57.9 104/ 31.7 A .2 B L W X .1 481/ 146.6 383/ 116.7 208/ 63.4 Quartzlite™ 500 Beam Spread Wide D=10 Feet/3.0 Meters A 176 D=20 Feet/6.1 Meters B L W X 74 33/ 10.1 24/ 7.3 13/ 4.0 A 44 D=80 Feet/24.4 Meters Wide D=40 Feet Spread/12.2 Meters Spread B L W X 19 67/ 20.4 48/ 14.6 25/ 7.6 A 11 D=100 Feet/30.5 Meters B L W X 5 133/ 40.5 95/ 29.0 51/ 15.5 D=200 Feet/71.0 Meters A B L W X A B L W X A B L W X 3 1.2 266/ 81.1 191/ 58.2 102/ 31.1 1.7 0.7 333/ 101.5 238/ 72.5 127/ 38.7 .4 .2 666/ 203.0 477/ 145.4 255/ 77.7 Lighting Note: To simplify proper beam overlapping, the size of “X” has been determined so that footcandles at edge (B) are approximately 1/3 of center intensity (A). * Photometric charts available on request. 1378 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster Jr.™ HID Wide-Beam Floodlights Integrally Ballasted. 150 W, 100 W, 70 W, 50 W HPS; 100 W PSMH. Medium Base. Applications • Available for use with HPS or PSMH medium base lamps. • HPS luminaires, with their superior energy efficiency are excellent for such applications as: — Security lighting — Small sports areas — Parking areas — Apartment complexes — Hotels and motels — Work area lighting — Accent, building facade and sign lighting • PSMH luminaires, with their near perfect color rendition, are recommended for: — Car lots — Garden shops — Small sports areas — Billboards — Building facades — Airports — Security areas • HPS and PSMH floodlights replace higher wattage, inefficient quartz and PAR lighting. • Suitable for use in wet locations. Projected Area: 0.7 Sq. Ft. Features Standard Materials • Ballast housing, door and mounting arm: diecast heavy gauge aluminum • Reflector: heavy gauge aluminum • Lens: heat- and impact-resistant tempered glass • Gasket: heavy, high temperature silicone rubber Standard Finishes • Reflector: diffused anodized natural finish • Housing, lens door and mounting arm: architectural bronze polyester finish Certifications and Compliances • UL Standard: 1598 (supersedes UL Standard 1572). • Suitable for use in wet locations • CSA Certified: LR9349 Lighting: General Lighting — Area — Floodlights • HPS units use approximately 80% less energy than incandescent PAR-38 lamps and 70-75% less than quartz lamps. In lumen output, the 50 W HPS unit is comparable to two 150 W PAR 38 incandescent lamps; 70 W HPS to 300 W T-3 quartz; and 100 W HPS to 500 W T-3 quartz. • Beam pattern is NEMA Type 7. • Extra-compact, high efficiency floodlights designed specifically for the small size of HID medium base lamps. • Compact size permits use of existing poles for retrofitting quartz fixtures. • Ruggedly built for dependable, vandal-resistant service. Attractively styled. Easy to install, aim, and service, with easy access to interior. • Durable architectural bronze polyester finish resists chipping, peeling and fading no matter what the weather or climate conditions. • Mounting arm: heavy duty, degree-marked swivel mounting arm with 3/4” pipe thread and locknut. Allows vertical and horizontal adjustment. Order mounting accessories separately. • Medium base porcelain socket with nickel-plated contacts. Rated for 4-KV pulse. Furnished with 392 °F/200 °C leads, prewired to the ballast. • Reflector: precision parabolic design, natural finish, aluminum for maximum efficiency. • Patented hinged door has thermal shock and impact resistant glass lens, secured within diecast aluminum frame with two captive stainless hex head steel screws for watertight fit. • HPF ballasts have non-PCB capacitors. Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1379 Areamaster Jr.™ HID Wide-Beam Floodlights Integrally Ballasted. 150 W, 100 W, 70 W, 50 W HPS; 100 W PSMH. Medium Base. Description Line Voltage Catalog Number Pulse Start Metal Halide Fixtures 100 Watt Metal Halide HX-Auto Ballast, High Power Factor 120 G-MM350H-12H ➊➋ 50 Watt High Pressure Sodium Reactor Ballast 120 G-MM150L-12R 50 Watt High Pressure Sodium Reactor Ballast, High Power Factor 120 G-MM150L-12RH ➊ 70 Watt High Pressure Sodium Reactor Ballast 120 G-MM250L-12R 70 Watt High Pressure Sodium Reactor Ballast, High Power Factor 120 G-MM250L-12RH ➊ 100 Watt High Pressure Sodium Reactor Ballast 120 G-MM350L-12R 100 Watt High Pressure Sodium Reactor Ballast, High Power Factor 120 G-MM350L-12RH ➊➋ 150 Watt High Pressure Sodium Reactor Ballast 120 G-MM450L-12R 150 Watt High Pressure Sodium Reactor Ballast, High Power Factor 120 G-MM450L-12RH ➊➋ High Pressure Sodium Fixtures Accessories and Replacement Parts Lighting Lighting: General Lighting — Area — Floodlights Description Catalog Number Crossarm Mount Has wiring compartment, 180° horizontal position scale. Mounts with bolt (not furnished). Aluminum. Includes cord grip. G-6028N Channel Crossarm Extruded aluminum, with slide-off cover. Six 3/4” threaded holes, with three close-up plugs. Mounts five luminaires. Mounts on 3/4” conduit or on G-810 poletop fitter. G-6017 Pipe or Wall Mount Bracket Mounts on 1” to 2” pipe, vertical or horizontal, or mounts on flat surfaces (used with G6028N) Includes U-bolts and bolt for G-6028N. Malleable iron. G-VB101 Poletop Fitter Cast aluminum, for mounting to 1-1/2” or 2” pipe. Has setscrews for securing to pole. 3/4” tapped top hub to accommodate luminaire or Channel Crossarm above. G-810 Wire Guard Mounts to lens door with screws furnished. Zinc plated. G-506 Top Visor Aluminum. Easy to install with hardware supplied. G-MM4V Vandal Shield UV stabilized polycarbonate, with installation hardware and instructions. G-MM-4-VS Replacement Lens and Frame Assembly G5005RFL Replacement Lens Only 59601252002 ➊ 208 V, 240 V or 277 V also available. For 208 V, change voltage suffix -12 to -20; for 240 V, change -12 to -24; and for 277 V, change -12 to -27. ➋ For 347 V, change voltage suffix -12H to -34 V. 1380 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster Jr.™ HID Wide-Beam Floodlight Specifications Integrally Ballasted. 150 W, 100 W, 70 W, 50 W HPS; 100 W PSMH. Medium Base. Line Voltage Type of Ballast Starting Amps Operating Amps Total Watts HX-Auto, High Power Factor 1.22/.44 1.15/.50 129 100-Watt Metal Halide 120 150-Watt High Pressure Sodium 120 Reactor 4.50 3.20 170 120 Reactor, High Power Factor 2.20 1.50 170 100-Watt High Pressure Sodium 120 Reactor 3.05 2.10 115 120 Reactor, High Power Factor 1.50 1.05 115 70-Watt High Pressure Sodium 120 Reactor 2.10 1.60 83 120 Reactor, High Power Factor 0.89 0.75 86 120 Reactor 1.80 1.18 62 120 Reactor, High Power Factor 0.95 0.55 60 50-Watt High Pressure Sodium Dimensions Channel Crossarm Pipe/Wall Mount Bracket Lighting: General Lighting — Area — Floodlights Crossarm Mount Poletop Fitter Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1381 Areamaster Jr.™ HID Wide-Beam Floodlight Photometric Data Integrally Ballasted. 150 W, 100 W, 70 W, 50 W HPS; 100 W PSMH. Medium Base. Fixture Wattage and HID Lamp—All Medium Base Clear. All Fixtures produce NEMA Type 7 Beam Pattern. Photometric Data Horizontal Spread Beam Lumens Beam Efficiency Maximum CP Average Maximum CP Total Lumens Total Efficiency 150 W HPS 146° 10,150 63% 5750 5317 10,422 65% 100 W HPS 146° 6036 64% 3415 3158 6186 65% 70 W HPS 146° 3676 63% 2084 1927 3746 65% 50 W HPS 146° 2536 63% 1437 1328 2576 64% 100 W PSMH 136° 4864 68% 3039 2581 4972 69% Candlepower Distribution All data based on fixture with clear medium base lamp 100-Watt Metal Halide 0° Candela Table Angle Horizontal -85.5 102 -76.5 175 -67.5 1224 -58.5 1972 -49.5 2319 -40.5 2707 -31.5 3302 -22.5 4091 -13.5 4888 -4.5 5334 0.0 5388 4.5 5334 13.5 4888 22.5 4091 31.5 3302 40.5 2707 49.5 2319 58.8 1972 67.5 1224 76.5 175 85.5 102 Vertical 13 112 450 774 1280 2070 3838 4842 5252 5390 5388 5390 5252 4842 3838 2070 1280 774 450 112 13 0° Candela Table Angle Horizontal -85.5 61 -76.5 104 -67.5 727 -58.5 1171 -49.5 1378 -40.5 1608 -31.5 1961 -22.5 2430 -13.5 2903 -4.5 3168 0.0 3200 4.5 3168 13.5 2903 22.5 2430 31.5 1961 40.5 1608 49.5 1378 58.5 1171 67.5 727 76.5 104 85.5 61 Vertical 8 67 267 459 760 1229 2280 2876 3119 3201 3200 3201 3119 2876 2280 1229 760 459 267 67 8 0° Candela Table Angle Horizontal -76.6 96 -68.0 233 -60.0 415 -52.0 772 -44.0 1471 -36.0 2226 -28.0 2641 -20.0 2729 -12.0 2537 -4.0 2296 0.0 2273 4.0 2296 12.0 2537 20.0 2729 28.0 2641 36.0 2226 44.0 1471 52.0 772 60.0 415 68.0 233 76.0 96 Vertical 11 285 417 536 660 1269 1442 1662 1957 2226 2273 2226 1957 1662 1442 1269 660 536 417 285 11 100-Watt High Pressure Sodium Lighting Lighting: General Lighting — Area — Floodlights 150-Watt High Pressure Sodium 1382 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Beam-Master™ Floodlights General Purpose and Heavy Duty. Ballast for 400 W PSMH; 1000 W, 1500 W MH; 400 W, 1000 W HPS. Applications • To illuminate large areas such as: — Building facades — Ship loading docks — Truck terminals — Security lighting — Airports — Athletic stadiums — Sports fields Features Mounting Options Poletop Slip-Fitter Mounting Crossarm Mounting Lighting: General Lighting — Area — Floodlights • General purpose and heavy duty units available for 400 W PSMH, 1000 W or 1500 W metal halide lamps or 400 W and 1000 W high pressure sodium lamps. Choice of five different NEMA beam spreads (1000 W HPS, two beam spreads; 400 W MH, three beam spreads.) • Compact design combines reflector assembly and ballast housing as a single unit — easier to wire and install. • Balanced weight distribution allows swing-over design for easy relamping and servicing. • Sturdy and rugged — withstands high vibration and rugged usage. • Breather openings allow unit to breathe, yet keep dirt and moisture out. • Floodlights have aiming device, plus 180° vertical positioning scale. Fully adjustable horizontally with crossarm bracket or poletop mount. • Swing-over design with a “memory” locking device for accurate return to pre-aimed position after servicing. • Mogul base porcelain socket has heavy gauge brass, nickel plated, double lamp-grip screw shell and spring-loaded center contact. • Heavy duty models have heavy shroud for protection against severe weather, such as high winds and hail. • Cord enters through a weatherproof cord grip. • Yoke is rugged 6061-T6 aluminum alloy. Crossarm bracket and poletop slip-fitter are malleable iron. • Ballasts are Class H insulated, UL Listed, C.W.A. type, available multi-tapped 120, 208, 240, or 277 Volts, or single-tap for 480 Volts. Standard Materials • • • • • • Refllectors: aluminum Lens: shock and impact resistant glass Gasket: one-piece silicone rubber gasket Frame and clamps: stainless steel Socket/ballast: cast aluminum Housing: mallaeble Iron Standard Finishes • Reflectors: natural finish • Ballast: white powder coated polyester finish • Housing: zinc plated, chromate sealed, architectural bronze polyester finish Certifications and Compliances • UL Listed: E85142 • UL Standard: 1598 • CSA Certified: LR9349 Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1383 Beam-Master™ Floodlights General Purpose and Heavy Duty. Ballast for 400 W PSMH; 1000 W, 1500 W MH; 400 W, 1000 W HPS. Candlepower NEMA Beam Spread Beam Type Horiz x Vert. Lumens Beam Effic. Avg. Max. CP Max CP With Ballast for 1000 W Metal Halide Lamp II 20.2° x 21.1° 37,577 34.2% 1,332,312 1,547,349 III 45.1° x 45.1° 55,104 50.1% 481,977 638,600 IV 58.6° x 59.3° 61,562 56.0% 213,277 266,126 V 73.6° x 74.0° 66,843 60.8% 128,822 160,661 VI 111.5° x 111.2° 74,020 67.3% 76,050 82,363 Line Voltage 120/208/240/277 Catalog Number General Purpose Heavy Duty G-SM821H-MTN ➊ G-SM821H-48N G-SM821HH-MTN ➊ G-SM821HH-48N G-SM831H-MTN ➊ G-SM831H-48N G-SM831HH-MTN ➊ G-SM831HH-48N G-SM841H-MTN ➊ G-SM841H-48N G-SM841HH-MTN ➊ G-SM841HH-48N G-SM851H-MTN ➊ G-SM851H-48N G-SM851HH-MTN ➊ G-SM851HH-48N G-SM861H-MTN ➊ G-SM861H-48N G-SM861HH-MTN ➊ G-SM861HH-48N G-SM921H-MTN ➊ G-SM921H-48N G-SM921HH-MTN ➊ G-SM921HH-48N G-SM931H-MTN ➊ G-SM931H-48N G-SM931HH-MTN ➊ G-SM931HH-48N G-SM941H-MTN ➊ G-SM941H-48N G-SM941HH-MTN ➊ G-SM941HH-48N G-SM951H-MTN ➊ G-SM951H-48N G-SM951HH-MTN ➊ G-SM951HH-48N G-SM961H-MTN ➊ G-SM961H-48N G-SM961HH-MTN ➊ G-SM961HH-48N G-SM721P-MTN ➊ G-SM721P-48N G-SM721PH-MTN ➊ G-SM721PH-48N 480 G-SM751P-MTN ➊ G-SM751P-48N G-SM751PH-MTN ➊ G-SM751PH-48N 120/208/240/277 G-SM761P-MTN ➊ G-SM761PH-MTN ➊ 120/208/240/277 G-SM851L-MTN ➊ G-SM851L-48N G-SM851LH-MTN ➊ G-SM851LH-48N G-SM861L-MTN ➊ G-SM861L-48N G-SM861LH-MTN ➊ G-SM861LH-48N G-SM721L-MTN ➊ G-SM721L-48N G-SM721LH-MTN ➊ G-SM721LH-48N G-SM731L-MTN ➊ G-SM731L-48N G-SM731LH-MTN ➊ G-SM731LH-48N G-SM741L-MTN ➊ G-SM741L-48N G-SM741LH-MTN ➊ G-SM741LH-48N G-SM751L-MTN ➊ G-SM751L-48N G-SM751LH-MTN ➊ G-SM751LH-48N G-SM761L-MTN ➊ G-SM761L-48N G-SM761LH-MTN ➊ G-SM761LH-48N 480 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 With Ballast for 1500 W Metal Halide Lamp II 20.2° x 21.1° 52,950 34.2% 1,877,349 2,180,356 III 45.1° x 45.1° 77,646 50.1% 679,149 899,846 IV 58.6° x 59.3° 86,746 56.0% 300,526 374,996 V 73.6° x 74.0° 94,188 60.8% 181,522 226,386 VI 111.5° x 111.2° 104,301 67.3% 107,161 116,057 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 Lighting: General Lighting — Area — Floodlights With Ballast for 400 W Pulse Start Metal Halide Lamp II 20.9° x 20.1° 14,538 36.3% 345,368 528,021 V 73.1° x 72.8° 19,566 48.9% 35,090 54,015 VI 108.4° x 99.1° 22,656 66.6% 28,815 34,043 480 120/208/240/277 With Ballast for 1000 W High Pressure Sodium Lamp V 69.1° x 65.2° 63,710 45.5% 175,347 302,942 VI 110.3° x 104.6° 81,722 58.4% 81,998 107,556 480 120/208/240/277 480 With Ballast for 400 W High Pressure Sodium Lamp II III IV V VI Lighting 120/208/240/277 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 120/208/240/277 480 ➊ For tri-tap 120/277/347 V, change suffix -MTN to -TTN V. 1384 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Beam-Master™ Floodlights General Purpose and Heavy Duty. Ballast for 400 W PSMH; 1000 W, 1500 W MH; 400 W, 1000 W HPS. Mounting Fittings and Accessories Dimensions Dimensions Description Catalog Number Crossarm Mounting Bracket 5.0"/ 127.0 mm 4.44"/ 112.8 mm G-AM-8-CA Slip-fits 2” or 2-1/2”/50.8 or 63.5 mm poletop tenons. Includes floodlight yoke bolts, 3 locking bolts and cord grip. G-AM-8-SF 22.88"/581.2 mm 2.31"/ 58.7 mm 24.00"/609.6 mm 21.00"/533.4 mm 180° horizontal adjustment— degree-marked. Facilitates mounting floodlight to crossarm or other flat surface, or to G-AM-8-WB. Includes floodlight yoke bolts. Poletop Slip-Fitter 3.5"/ 88.9 mm 4.5"/ 114.3 mm 6.0"/127.0 mm 4.0"/101.6 mm Pipe or Wall Mount Bracket 4.88"/ 124.0 mm 5.0"/ 127.0 mm 3.0"/ 76.2 mm 5.5"/139.7 mm 4.5"/ 114.3 mm Used with G-AM-8-CA. Clamps to 1” to 2”/25.4 to 50.8 mm pipe, vertical or horizontal, or mounts on flat surfaces. Includes U-bolt and crossarm bracket bolts. G-AM-8-WB Fuse and Cartridge 10 Amp. G-F10 20 Amp G-F20 Electrical Specifications 400 W Line Volts Start Oper. Metal Halide — C.W.A. ➋ Ballast Amps 1000 W Total Total Watts Start Oper. Watts Start 1500 W Oper. Total Watts High Pressure Sodium — C.W.A. ➋ Ballast Amps 400 W 1000 W Total Total Start Oper. Watts Start Oper. Watts 120 3.25 4.00 458 8.0 9.20 1080 13.50 14.0 1610 3.30 3.80 465 6.35 9.50 1100 208 1.90 2.30 458 4.6 5.30 1080 7.70 8.00 1610 1.80 2.20 465 3.80 5.50 1100 240 1.90 2.00 458 4.0 4.60 1080 6.70 7.00 1610 1.60 1.90 465 3.20 4.80 1100 277 1.40 1.75 458 3.50 4.00 1080 5.90 6.00 1610 1.40 1.70 465 2.75 4.20 1100 480 .85 1.00 465 2.00 2.30 1080 2.25 3.50 1610 .80 1.00 465 1.80 2.45 1100 Lighting ➋ C.W.A.—Constant Wattage Autotransformer. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: General Lighting — Area — Floodlights Cartridges are furnished complete with two 10”/254 mm-long high temperature wire leads and 600 Volt fuse. 1385 Wallmaster™ HPS/PSMH Luminaires Lighting: General Lighting — Area — Architectural Lighting Vertical and Horizontal Wall Mount 50 W, 75 W, 100 W, 150 W HPS; 70 W, 100 W PSMH. Applications • Totally enclosed luminaires for public security installations. Tough polycarbonate refractor provides vandal resistance. • Ideal where illumination over wide areas adjacent to walls is required. Applications include walkways, parking lots and garages, building exteriors, shopping centers, stores, restaurants, tunnels, underpasses, loading docks, ramps, security lighting areas, entrances and recreational areas. Features • Computer designed optical system. Reflector provides optimum down and out light distribution. Prismatic refractor provides soft light with even distribution, reducing glare. • Contemporary architectural design with attractive bronze polyester finish. Soft, diffused light enhances the beauty of any architectural setting. • Enclosed and gasketed for use in wet locations—indoors and out. High temperature neoprene gasketing. • Easy to maintain. Hinged lens frame swings open (just loosen two captive bolts) for fast, easy relamping and access to internal components. • Quick, easy installation. Fixture bolts to any flat surface or any standard 3” or 4”/76.2 or 101.6 mm outlet box for vertical mounting. • High energy efficiency. High pressure sodium lamps use approximately one-fourth as much electrical energy as incandescent lamps. • Pre-wired, integrally ballasted. • Complete assemblies available with a choice of ballasts: high reactance high power factor—with or without photocontrol (automatic ON–OFF operation). High power factor ballasts provide a minimum 90% P.F. and are suitable for use in high ambient temperature areas. High reactance high power factor ballasts are single-tap (120 or 480 Vac), dual tap (120/277 Vac) and multi-tap (120-277 Vac). Reactor and reactor high power factor ballasts are 120 Vac. • Glass thermal barrier in 100 W and 150 W units protects polycarbonate lens from heat for longer lens life. • Tough, molded polycarbonate refractor provides cool fixture operation. • Three knockouts provided for conduit and wiring. • Medium base porcelain socket with spring loaded nickel plated contacts. Standard Materials • Ballast housing and wall bracket: aluminum • Hinged lens assembly: high Impact, non-solarizing, polycarbonate • Reflector: aluminum Dimensions 18.0"/ 457.2 mm 9.81"/ 249.2 mm 4.88"/ 124.0 mm 6.38"/ 162.1 mm 15.13"/ 384.3 mm .49 Sq.Ft./0.05 Sq. M .51 Sq.Ft./0.05 Sq. M 2.88"/ 73.2 mm 6.88"/ 174.8 mm Certifications and Compliances • UL Standard: E85142 • UL Standard: 1598 • CSA Certified: LR9349 Standard Finishes • Ballast housing, wall bracket: two-coat bronze polyester finish • Reflector: natural finish Options • Photocontrol provides automatic ON-OFF operation. Order luminaires with -PC suffix or add -PC suffix to any 120 Volt luminaire catalog numbers. † For multi-tap ballast specify voltage to be used. 1386 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Wallmaster™ HPS/PSMH Luminaires Vertical and Horizontal Wall Mount Line Voltage Vertical Mount Catalog Number Horizontal Mount Vertical Mount V 50-Watt High Pressure Sodium Reactor Ballast 120 V G-WM130L-12R G-WM134L-12R G-WMM50L-R1 V Reactor Ballast, High Power Factor 120 V G-WM130L-12RH G-WM134L-12RH G-WMM50L-H1 V 70-Watt High Pressure Sodium High Reactance Ballast, High Power Factor 120/208/240/277 V G-WM230L-MT G-WM234L-MT G-WMM70L-MT V High Reactance Ballast, High Power Factor 480 V G-WM230L-48 G-WM234L-48 Not Available Reactor Ballast 120 V G-WM230L-12R G-WM234L-12R G-WMM70L-R1 V Reactor Ballast, High Power Factor 120 V G-WM230L-12RH G-WM234L-12RH G-WMM70L-H1 V 100-Watt High Pressure Sodium High Reactance Ballast, High Power Factor 120/208/240/277 V G-WM330L-MT G-WM334L-MT G-WMM10L-MT V High Reactance Ballast, High Power Factor 480 V G-WM330L-48 G-WM334L-48 Not Available Reactor Ballast 120 V G-WM330L-12R G-WM334L-12R G-WMM10L-R1 V Reactor Ballast, High Power Factor 120 V G-WM330L-12RH G-WM334L-12RH G-WMM10L-H1 V G-WM430L-MT G-WM434L-MT Not Available 150-Watt High Pressure Sodium High Reactance Ballast, High Power Factor 120/208/240/277 V High Reactance Ballast, High Power Factor 480 V Not Available Not Available Not Available Reactor Ballast 120 V G-WM430L-12R G-WM434L-12R G-WMM15L-R1 V Reactor Ballast, High Power Factor 120 V G-WM430L-12RH G-WM434L-12RH G-WMM15L-H1 V 120/208/240/277 V G-WM230H-MT G-WM234H-MT G-WMM70H-MT V 120/208/240/277 V G-WM330H-MT G-WM334H-MT G-WMM10H-MT V 70-Watt Pulse Start Metal Halide High Reactance Ballast, High Power Factor 100-Watt Pulse Start Metal Halide High Reactance Ballast, High Power Factor Wall Mounting Kit Dimensions Description Catalog Number 4.88"/ 124.0 mm Adapts vertical mount fixtures to horizontal position. G-WM-HMK 2.88"/ 73.2 mm Add suffix -PC for Photocontrol. Provides automatic dusk-to-dawn ON-OFF operation. Specify voltage to be used with photocell, if used with multi voltage ballast. Change the -MT suffix to -TT for tri-tap 120/277/347 V V. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1387 Lighting: General Lighting — Area — Architectural Description Lighting 50 W, 75 W, 100 W, 150 W HPS; 70 W, 100 W PSMH. Wallmaster™ HPS/PSMH Luminaire Electrical Specifications Lighting: General Lighting — Area — Architectural Lighting Vertical and Horizontal Wall Mount 50 W, 75 W, 100 W, 150 W HPS; 70 W, 100 W PSMH. Line Voltage Type of Ballast Starting Amps Operating Amps Total Watts 50-Watt High Pressure Sodium 120 Reactor 1.80 1.18 60 120 Reactor, High Power Factor 0.75 0.55 60 70-Watt High Pressure Sodium 120/208/240/277 High Reactance, High Power Factor 0.75/0.35 0.81/0.35 91 480 High Reactance, High Power Factor 0.21 0.21 94 120 Reactor 2.25 1.70 87 120 Reactor, High Power Factor 0.85 0.75 82 100-Watt High Pressure Sodium 120/208/240/277 High Reactance, High Power Factor 1.30/.60 1.15/0.50 130 480 High Reactance, High Power Factor 0.33 0.31 135 120 Reactor 3.05 2.40 115 120 Reactor, High Power Factor 1.50 1.05 115 High Reactance, High Power Factor 2.00/0.85 1.65/.72 188 150-Watt High Pressure Sodium 120/208/240/277 480 High Reactance, High Power Factor 0.50 0.47 189 120 Reactor 4.55 3.40 170 120 Reactor, High Power Factor 2.20 1.50 170 0.80/0.39 0.85/0.39 95 1.22/0.44 1.15/0.50 128 70-Watt Pulse Start Metal Halide 120/208/240/277 High Reactance, High Power Factor 100-Watt Pulse Start Metal Halide 120/208/240/277 1388 Constant Wattage Auto transformer (CWA) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Wallmaster™ HPS/PSMH Luminaire Photometric Data * Vertical and Horizontal Wall Mount Lighting 50 W, 75 W, 100 W, 150 W HPS; 70 W, 100 W PSMH. Data Based on 70 Watt, HPS Clear B-17 Medium Base Lamp (6,300 lumens). Lighting: General Lighting — Area — Architectural Typical Footcandle Values 70 W High Pressure Sodium Ft. Candles for Iso-Footcandle Lines Mtg. Ht. A B C E F 6' 5.80 4.80 3.87 2.88 D 1.94 0.96 0.39 G 7' 4.22 3.54 2.84 2.14 1.42 0.70 0.29 8' 3.26 2.72 2.17 1.63 1.09 0.54 0.22 10' 2.09 1.73 1.39 1.04 0.70 0.34 0.14 12' 1.45 1.21 0.96 0.72 0.48 0.24 0.10 14' 1.06 0.89 0.71 0.53 0.36 0.18 0.07 Watts Lumens Mult. 35 2,250 .357 50 3,500 .556 100 9,500 1.508 150 16,000 2.540 NOTE: For other HPS, Clear, Med. Base Lamps multiply all footcandle values as follows: ◊ Distance in terms of mounting height (i.e., ratio) of distance to height. Example: @ 15 foot/4.6 meters mounting height, 1 means 15 foot/4.6 meters; 2 means 30 foot/9.1 meters, etc.) * Additional photometric charts available on request. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1389 Wallmaster 400 HPS/PSMH Luminaires ™ Lighting: General Lighting — Area — Architectural Lighting Horizontal Lamps Suitable for Wet Locations 400 W, 250 W, 175 W PSMH; 400 W, 250 W HPS. Mogul Base. Applications • Ideal where illumination over wide areas adjacent to walls is required. Applications include: — Walkways — Parking lots — Garages — Building exteriors — Shopping centers — Stores — Restaurants — Tunnels — Underpasses — Loading docks — Ramps — Security lighting areas — Entrances — Recreational areas Features • Enclosed and gasketed for use in outdoor wet locations. • Specular anodized aluminum reflector provides efficient light projection. • High transmittance, non-yellowing borosilicate glass refractor for superior photometrics. • Field adjustable bracket permits easy adjustment of beam angle. • Quick, easy installation. Back plates permit alignment with virtually all standard recessed junction boxes. • Prewired, integrally ballasted. Housing is designed for heavy duty use and coated with bronze polyester powder to optimize protection against chipping and fading. • Stainless steel aircraft cable connects lens assembly to mounting plate freeing both hands for servicing and installation. • 3 tapped holes (1/2”/12.7 mm NPS standard) – one on each side and one on the top. May be used for conduit or optional photocontrol. • All ballasts are high power factor, CWA type. Standard Materials • Ballast housing: die cast copperfree (4/10 of 1% max.) aluminum • Refractor: heat and shock resistant, non-yellowing borosilicate glass • Refractor to housing joint: liquid silicone rubber • Gasket (between lens assembly and mounting plate): neoprene • Lamp socket: glazed porcelain Standard Finishes • Ballast housing: bronze polyester finish Options • • • • Stainless steel wire guard to protect fixture. Lexan® shields for added protection. Photocontrol for automatic ON/OFF operation. Fusing to provide overcurrent protection. Certifications and Compliances • UL Listed: E85142 • UL Standard:1598 • CSA Certified: LR9349 1390 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Wallmaster 400 HPS/PSMH Luminaires ™ Horizontal Lamps Suitable for Wet Locations Lighting 400 W, 250 W, 175 W PSMH; 400 W, 250 W HPS. Mogul Base. Weight Lbs./ Kgs ➊ Catalog Number 175 Watt Metal Halide CWA Ballast, High Power Factor 120-277 17/7.7 G-WM530P-MT ➋ CWA Ballast, High Power Factor 480 17/7.7 G-WM530P-48 ➋ CWA Ballast, High Power Factor 120-277 24/10.9 G-WM630P-MT ➋ CWA Ballast, High Power Factor 480 24/10.9 G-WM630P-48 ➋ CWA Ballast, High Power Factor 120-277 38/17.2 G-WM730P-MT ➋ CWA Ballast, High Power Factor 480 38/17.2 G-WM730P-48 ➋ CWA Ballast, High Power Factor 120-277 41/18.6 G-WM630L-MT ➋ CWA Ballast, High Power Factor 480 41/18.6 G-WM630L-48 ➋ CWA Ballast, High Power Factor 120-277 45/20.4 G-WM730L-MT ➋ CWA Ballast, High Power Factor 480 45/20.4 G-WM730L-48 ➋ 250 Watt Pulse Start Metal Halide 400 Watt Pulse Start Metal Halide 250 Watt High Pressure Sodium 400 Watt High Pressure Sodium Dimensions MH 12.25"/ 12-1/4" 311.2 mm PSMH, HS 7.25"/ 7-1/4" 184.2 mm 9.5"/ 9-1/2" 241.3 mm 17.0"/ 431.8 mm 14.0"/ 355.6 mm 9.5"/ 241.3 mm ➊ All weights are approximate. ➋ Use supply wire rated 302 °F/150 °C. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1391 Lighting: General Lighting — Area — Architectural Line Voltage Description Wallmaster 400 HPS/PSMH Luminaire Accessories ™ Lighting: General Lighting — Area — Architectural Lighting Horizontal Lamps Suitable for Wet Locations 400 W, 250 W, 175 W PSMH; 400 W, 250 W HPS. Mogul Base. Description Weight Lbs./Kgs ➊ Catalog Number 0.1/.05 G-FH2 Fuse Kit 2 Amp 3 Amp 0.1/.05 G-FH3 5 Amp 0.1/.05 G-FH5 6 Amp 0.1/.05 G-FH6 8 Amp 0.1/.05 G-FH8 10 Amp 0.1/.05 G-FH10 For use with 175 Watt Metal Halide 1.2/0.54 G-WM5G For use with 250 – 400 Watt Metal Halide and High Pressure Sodium 1.3/0.59 G-WM7G Stainless Steel Guard Lexan® Shield For use with 175 Watt Metal Halide 1.0/0.45 G-WM5VS For use with 250 – 400 Watt Metal Halide and High Pressure Sodium 1.5/0.68 G-WM7VS 120 Volt (1900 VA) 0.3/0.14 G-WMPC120 208-277 Volt (1900 VA) 0.3/0.14 G-WMPC208 480 Volt (1900 VA) 0.3/0.14 G-WMPC480 Lens / Cover Assembly for 175 Watt Units 6.5/2.95 G-WM5CA Lens / Cover Assembly for 250 – 400 Watt Units 11.3/5.13 G-WM7CA Mogul Base Lampholder 0.5/0.23 G-WMRS Photocontrols Replacement Parts ➊ All weights are approximate 1392 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Wallmaster 400 HPS/PSMH Luminaire Photometric Data ™ Horizontal Lamps Suitable for Wet Locations Lumens: Mounting Height: 400 Watt Pulse Start Metal Halide Clear, BT-37 34000 20 Feet RATIO: LATERAL DISTANCE / MOUNTING HEIGHT 0 5 1 400 Watt Metal Halide 2 2 CONVERSION TABLE for different mounting heights 15’ 1.78 30’ .44 20’ 1.00 35’ .33 25’ .64 40’ .25 G-WM630P Lumens: Mounting Height: 3 .2 4 250 Watt Pulse Start Metal Halide Clear, BT-28 19500 15 Feet 3 2 1 0 1 2 3 RATIO: LATERAL DISTANCE / MOUNTING HEIGHT 0 5 1 2 CONVERSION TABLE for different mounting heights 1 2 10’ 2.25 20’ .56 15’ 1.00 25’ .36 .5 3 .2 4 G-WM530P Lamp: 2 1 1 16’ .39 10’ 1.00 18’ .30 3 12’ .83 20’ .25 4 14’ .51 2 1 .5 .25 5 2 3 400 Watt High Pressure Sodium Clear, E18 50000 20 Feet 1 .44 20’ 1.00 35’ .33 25’ .64 40’ .25 0 1 1 2 10 5 1 2 2 1 3 3 4 2 5 .5 .5 4 .25 .2 5 5 3 3 2 2 1 1 0 1 0 2 1 RATIO: LONGITUDINAL DISTANCE / MTG. HGT. 30’ RATIO: LONGITUDINAL DISTANCE / MTG. HGT. 1.78 3 2 1 0 1 RATIO: LATERAL DISTANCE / MOUNTING RATIO: LATERAL DISTANCE / MOUNTING HEIGHT HEIGHT 0 CONVERSION TABLE for different mounting heights 15’ 3 5 2 1.56 Lumens: Mounting Height: 2 0 8’ Lamp: 1 1 CONVERSION TABLE for different mounting heights G-WM730L 0 RATIO: LATERAL DISTANCE / MOUNTING HEIGHT RATIO: LONGITUDINAL DISTANCE / MTG. HGT. Lumens: Mounting Height: 3 175 Watt Pulse Start Metal Halide Coated, BT-28 (in middle position) 12000 10 Feet RATIO: LONGITUDINAL DISTANCE / MTG. HGT. Lamp: 1 .5 RATIO: LONGITUDINAL DISTANCE / MTG. HGT. Lamp: Lighting: General Lighting — Area — Architectural G-WM730P Lighting 400 W, 250 W, 175 W PSMH; 400 W, 250 W HPS. Mogul Base. 3 2 3 1393 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 RATIO: LATERAL DISTANCE / MOUNTING HEIGHT 0 RAT Wallmaster 400 HPS/MH Luminaires Photometric Data ™ 400 W, 250 W, 175 W PSMH; 400 W, 250 W HPS. Mogul Base. G-WM630L Lamp: Lumens: Mounting Height: 250 Watt High Pressure Sodium Clear, E-18 27500 20 Feet RATIO: LATERAL DISTANCE / MOUNTING HEIGHT 0 5 1 2 2 1 .5 3 .2 4 3 2 1 0 1 2 3 Fusing For Wallmaster™ 400 Lamp Watts 175 W 250 W 400 W 1394 Volts 120 208 240 277 480 120 208 240 277 480 120 208 240 277 480 1 Ballast Amps High Pressure Sodium (CWA) Pulse Start Metal Halide (CWA) Rating Start Oper. Rating Start Oper. 2 — — — 5A .90 1.78 — — — 3A .50 1.08 3 — — — 3A .35 .89 — — — 2A .30 .76 4 — — — 2A .25 .50 8A 2.00 2.50 8A 1.90 2.50 5A 1.20 1.50 5A 1.10 1.45 5A 1.00 1.30 5A .96 1.25 3A .85 1.10 3A .85 1.10 3A .40 .65 3A .45 .60 10A 3.30 3.80 10A 3.50 4.00 8A 1.80 2.20 6A 2.00 2.30 5A 1.60 1.90 5A 1.75 2.00 5A 1.40 1.70 5A 1.50 1.75 5A .80 1.00 5A .90 1.00 5 Fuse Catalog Number 3 Fuse Qty. Req. 1 2 2 1 2 2 1 1 2 2 1 2 1 2 2 1 2 2 HPS (CWA) — .5 — — .2 — 0 1 — G-FH8 G-FH5 G-FH5 G-FH3 G-FH3 G-FH10 G-FH8 G-FH5 G-FH5 G-FH5 1 2 3 RATIO: LONGITUDINAL DISTANCE / MTG. HGT. RATIO: LATERAL DISTANCE / MOUNTING HEIGHT 0 RATIO: LONGITUDINAL DISTANCE / MTG. HGT. Lighting: General Lighting — Area — Architectural Lighting Horizontal Lamps Suitable for Wet Locations PSMH (CWA) G-FH5 G-FH3 G-FH3 G-FH2 G-FH2 G-FH8 G-FH5 G-FH5 G-FH3 G-FH3 G-FH10 G-FH6 G-FH5 G-FH5 G-FH5 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster Squarelite™ 400 Sharp Cutoff Luminaires Integrally Ballasted. For Double-Ended, Tubular 400 W HPS. Lighting Lighting: General Lighting — Area — Architectural Applications • Powerful, efficient lighting for areas such as parking lots, shopping centers, building exteriors, sports areas, security lighting and industrial process lighting. • Ideal where controlled light distribution over medium or large size areas is required. Delivers light only where it is needed with virtually no glare. • Enclosed and gasketed, Suitable for use in wet locations. Features • A single luminaire efficiently projects light in a rectangular pattern-the shape of most areas to be lighted. A cluster of four pole-mounted luminaires casts light in a nearly perfect square. Ideal for such areas as parking lots, shopping centers and sports areas. • Utilizes a specially developed, small, double-ended tubular lamp in combination with a unique precision reflector. The design of the reflector together with the precise positioning of the arc tube provides exceptionally accurate control of the light distribution. • Projects optimum light levels over medium and large size areas with virtually no wasted light. A single, horizontally mounted 400 Watt luminaire provides 36,350 candlepower at 51 with a sharp cutoff at 66° (62° at front and 4° at back of luminaire) with a horizontal cutoff (sideways ) at 101°. • Sharp cutoff confines light to specific property zones No spilling of light on neighboring properties. • Even light distribution at a 4-to-1 spacing-to-pole-height ratio. • Virtually no glare. The lamp is deeply recessed within the reflector to eliminate visually uncomfortable glare. • Compact in size, attractively styled contemporary design, rugged and dependable. • A wide range of ballasts and voltages are available for both domestic and export applications. • Integral ballast. • Mounting Choice: (1) Trunnion mount, zinc plated steel trunnion with architectural bronze polyester finish (2) Integral slip-fitter mount. Built-in slip-fitter for internal wiring. Adjustable laterally and vertically, slip-fits 2” or 2-1/2”/50.8 or 63.5 mm pipe. Architectural bronze polyester finish (3) Davit Mount. Bolts to square pole-topfitter. Up to four luminaries may be clustered on each pole fitter Illustrated Features Unique reflector design projects light at wide angle with sharp cutoff. Projected Area: 1.2 Sq. Ft./0.11 Sq. M. Standard Materials • • • • • • Reflector: aluminum Lens: thermal shock and impact resistant glass Gasket: silicone rubber Housing: aluminum Lens door: aluminum Hex head bolts: 4 — 1/4"/6.4 mm dia. captive stainless steel Standard Finishes • Reflector: natural finish • Housing, mounting and lens door: architectural bronze polyester finish Certifications and Compliances • UL Listed: E85142 • UL Standard: 1598 • CSA Certified: LR9349 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 With Areamaster Squarelite, a single horizontally mounted (for low glare) luminaire projects light at a wide angle with sharp cutoff-ideal for medium and large size areas such as parking lots, shopping centers and sports areas. Electrical Specifications Line Volts 120 208 240 277 347 480 High Pressure Sodium — C.W.A. Ballast Amps — 400 W Start Oper. Total Watts 3.30 3.80 465 1.80 2.20 465 1.60 1.90 465 1.40 1.70 465 1.00 1.32 465 0.80 1.00 465 1395 Areamaster Squarelite™ 400 Sharp Cutoff Luminaires Lighting: General Lighting — Area — Architectural Lighting Integrally Ballasted. For Double-Ended, Tubular 400 W HPS. Description LIne Voltage Catalog Number ➊ Davit Mount 120/208/240/277 Bolts to Square Poletop Filter (Cat No. G-SCDA) or Wall Bracket (Cat. No. G-SWD-1 below. G-SC776L-MT-L ➋ 480 G-SC776L-48-L 120/208/240/277 G-SC776L-MT ➋ 480 G-SC776L-48 Integral Slip-Fitter Mount 120/208/240/277 Slip-fits on any 2”/50.8 mm or 2-1/2”/63.5 mm pipe size poletop tenons. G-SC775L-MT-L ➋ 480 G-SC775L-48-L 120/208/240/277 G-SC775L-MT ➋ 480 G-SC775L-48 Trunnion Mount 120/208/240/277 May be used with Poletop slip-fitter or crossarm accessory G-SC771L-MT-L ➋ 480 G-SC771L-48-L 120/208/240/277 G-SC771L-MT ➋ 480 G-SC771L-48 Square Poletop Fitter for Davit Mount Slips onto 2”/50.8 mm poletop tenons. Accommodates up to four Davit Mount luminaires. G-SCDA Secured to wall with four bolts. Davit mount is bolted to this bracket. G-SWD-1 UV stabilized polycarbonate, with installation hardware and instructions. G-AM-6-VS For NEMA type photocontrol, with installation hardware, instructions. G-1PCR Wall Bracket for Davit Mount Vandal Shield for Luminaire Photocontrol Receptacle ➊ Lamp furnished with fixture on catalog numbers with Suffix -L: HPS tubular 400 W T-7, 46,000 lumens (LU400/T7). ➋ Change the -MT suffix to -TT for tri-tap 120/277/347 V V. 1396 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Areamaster Squarelite™ 400 Sharp Pole Data Integrally Ballasted. For Double-Ended, Tubular 400 W HPS. Lighting Lighting: General Lighting — Area — Architectural Application • To mount single or multiple luminaires at heights of 20 to 40 feet/ 6.1 to 12.2 meters. 4.0"/ 101.6 mm Features T 4.0"/ 101.6 mm • 2”/50.8 mm pipe size tenon accepts a single luminaire, or 2, 3 or 4 luminaires with appropriate poletop bracket. • High-strength shafts are made from square steel structural tube with minimum yield strength of 46,000 psi. • Base plates are of structural quality hot-rolled steel with minimum yield strength of 36,000 psi. Anchor base telescopes the pole shaft and is welded around top and bottom. • A 3” x 5”/76.2 x 127 mm reinforced handhole with cover and grounding lug 14”/355.6 mm above the pole base is standard. • Anchor bolts are furnished complete with two hex nuts and washers, and are of 55,000 psi steel. • Poles are designed to withstand dead loads and theoretical dynamic loads developed by sustained winds of 80 mph/128 kph with an appropriate gust factor. The weights and EPA include luminaires and/or mounting adapters, and their effective projected area is considered to be the product of the actual projected area and the drag coefficient. Pennants, signs, and similar elements that create additional stress on poles should not be used without prior factory approval. 2”/50.8 mm Pipe Size Tenon (2-3/8”/ 60.5 mm O.D.) 14.0"/ 355.6 mm Square Steel Poles for Davit Mount Luminaires Dimensions may vary. Consult your local sales representative for specifications Mtg. Ht. Feet/Meters A Shaft Size Inches/ Millimeters Bolt Circle in/mm BC Base Thickness in/mm T Anchor Bolt Dia. x Lgth. in/mm Max. Proj. Area Sq.Ft./Sq.M. ➊ Catalog Number ➌ 20/6.1 4” x 4” x 11Ga./ 101.6 x 101.6 x 11Ga ➋ .75/19.1 .75 x 20/ 19.1 x 508 9.0/0.84 G-PSSL-20EPX 25/7.6 4” x 4” x 11Ga. 101.6 x 101.6 x 11Ga. ➋ .75/19.1 .75 x 20/ 19.1 x 508 4.1/0.38 G-PSSL-25EPX 30/9.1 5” x 5” x 11Ga. 127 x 127x 11Ga ➋ 1.0/25.4 .25 x 20/ 25.4 x 508 4.2/0.39 G-PSSL-30EPX 35/10.7 5” x 5” x 7Ga. 127 x 127 x 7Ga ➋ 1.0/25.4 1 x 40/ 25.4 x 1016 6.1/0.57 G-PSSM-35EPX 39/11.9 6” x 6” x 7Ga. 152.4 x 152.4 x 7Ga. ➋ 1.0/25.4 1 x 40 25.4 x 1016 7.8/0.72 G-PSSH-39EPX ➊ Calculated for winds of 80 MPH/128 KPH. ➋ Dimensions may vary- Consult your local sales representative for specifications. ➌ Square steel poles are furnished with anchor bolts and nuts, and 2-3/8”/60.5 mm O.D. x 4”/101.6 mm tenon, finished with bronzetone enamel and cardboard wrapped. Touch-up paint furnished with every shipment. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1397 Areamaster Squarelite™ 400 Sharp Cutoff Luminaire Photometric Data This report has been prepared in accordance with IES guides on testing procedures. It is representative of luminaires tested under standardized and stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field performance. Distance (ft) Ahead/Behind Footcandle 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 30 — — — — — — — — — — — .01 .01 .02 .03 .05 .07 .10 .14 .23 .55 1.06 1.85 40 — — — — — .01 .01 .01 .02 .03 .04 .05 .06 .08 .10 .21 .37 .60 .91 1.35 1.91 2.53 3.39 50 .01 .01 .01 .02 .02 .03 .03 .04 .05 .06 .10 .17 .26 .38 .54 .74 1.00 1.29 1.62 2.05 2.69 9.07 3.17 60 .02 .03 .03 .04 .04 .06 .09 .14 .20 .27 .35 .46 .60 .77 .93 1.13 1.37 1.66 2.02 2.16 2.21 2.21 2.18 50 3.08 4.55 3.19 2.34 45 4.51 4.93 3.16 2.24 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 6.64 8.65 8.85 8.95 9.25 11.4 13.7 12.7 6.58 1.15 .60 .77 1.13 1.11 .85 4.98 4.98 5.04 5.49 6.41 7.47 7.67 6.53 3.70 .81 .40 .31 .43 .59 .70 3.23 3.18 3.63 4.10 4.64 4.95 4.83 3.93 2.37 .58 .33 .23 .21 .26 .35 2.31 2.57 2.85 3.16 3.43 3.41 3.18 2.60 1.65 .48 .29 .18 .15 .15 .19 Mounting Height (Feet) Distance in terms of mounting height ◊ Lighting: General Lighting — Area — Architectural Lighting Integrally Ballasted. For Double-Ended, Tubular 400 W HPS. Photometric Number TSC2001-S2 Sharp Cutoff 400 W HPS Luminaire G-SC776L-MT. (HPS 400 W LU400/T7, 46,000 lumens). Distance in terms of mounting height ◊ 400W HPS Mtg. Ht. 20 25 30 35 40 45 Ft. Candles for Iso-Footcandle Lines A 29.03 18.58 12.90 9.48 7.26 5.73 B 20.21 12.91 8.98 6.60 5.05 4.00 C 19.19 12.28 8.53 6.27 4.80 3.79 D 8.07 5.16 3.59 2.63 2.02 1.59 E 2.39 1.53 1.06 .78 .60 .47 F .39 .25 .17 .13 .10 .08 G .17 .11 .08 .06 .04 .03 H .04 .04 .03 .02 .02 .01 ◊ Distance in terms of mounting height (i.e., ratio) of distance to height. Example: @ 15 foot/4.6 meters mounting height, 1 means 15 foot/4.6 meters; 2 means 30 foot/9.1 meters, etc.) * Additional photometric charts available on request. 1398 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Round Tapered Steel Poles Applications • To mount single or multiple luminaires to heights from 20 to 39 feet/6.1 to 11.9 meters. Features Lighting 4.0"/ 101.6 mm • 2”/50.8 mm pipe size tenon accepts a single luminaire, or 2, 3, or 4 luminaires with appropriate pole-top mounting bracket. • Shafts are tapered, one-section design of 11 gauge commercial quality steel with a minimum yield strength of 55,000 psi after fabrication. • Base plates are of structural quality hot-rolled steel with guaranteed minimum yield strength of 36,000 psi. • A 4” x 6-1/2”/101.6 x 165.1 mm reinforced handhole with cover and grounding lug 14”/55.6 mm above the pole base is standard. • Anchor bolts are furnished complete with nuts and washers, and are of 55,000 psi steel. 2"/50.8 mm Pipe Size Tenon (2-3/8"/60.5 mm O.D) Lighting: General Lighting — Area — Poles and Hangers Standard Finishes • Poles are finished with red-oxide prime-paint after fabrication Options • For bronze powder coat finish (to match Appleton fixtures) add Suffix -EPX. • For galvanized finish add -GAL. 14.0"/ 355.6 mm Dimensions may vary. Consult your local sales representative for specifications Mounting Height Ft/M A Shaft Size ➋ Base Size In/mm S➊ Bolt Circle In/mm BC Base Thickness In/mm T➊ Bolt Proj. In/mm P➊ Tube Diameter In/mm D Anchor Bolt Dia. x Lgth. In/mm Max. Proj Area Sq.Ft./Sq.M.➌ Catalog Number ➍ 20/6.1 6.5 x 3.7 x 20’/ 165.1 x 94.0 x 6.1 10.0/254.0 ➊ 1.0/25.4 2.25/57.2 6.5/165.1 1 x 40/ 25.4 x 1016 18.7/1.74 G-PRTH-20 25/7.6 7.0 x 3.5 x 25’/ 177.8 x 88.9 x 7.6 10.5/266.7 ➊ 1.0/25.4 2.25/57.2 7.0/177.8 1 x 40 25.4 x 1016 14.4/1.34 G-PRTH-25 30/9.1 8.0 x 3.8 x 30’/ 203.2 x 96.5 x 9.1 11.5/292.1 ➊ 1.0/25.4 2.25/57.2 8.0/203.2 1 x 40 25.4 x 1016 14.5/1.35 G-PRTH-30 35/10.7 8.5 x 3.6 x 35’/ 215.9 x 91.4 x 10.7 12.0/304.8 ➊ 1.0/25.4 2.25/57.2 8.5/215.9 1 x 40 25.4 x 1016 12.6/1.17 G-PRTH-35 39/11.9 9.0 x 3.5 x 39’/ 228.6 x 88.9 x 11.9 13.0/330.2 ➊ 1.0/25.4 2.25/57.2 9.0/228.6 1 x 40 25.4 x 1016 11.7/1.09 G-PRTH-39 ➊ Dimensions may vary—Consult your local sales representative for specifications. ➋ Shaft bottom (In. Dia./MM. Dia) x shaft top (In. Dia./MM.Dia.) x shaft length to tenon. ➌ Calculated for winds of 100 MPH/160 KPH. ➍ Anchor bolts and nuts are furnished. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1399 Hinged Steel Poles Applications Lighting: General Lighting — Area — Poles and Hangers Lighting • To mount single or multiple luminaires to heights from 20 to 35 feet/6.1 to 9.1 meters. Hinged design allows easy servicing of luminaires at shoulder height. 2"/50.8 mm Pipe Size Tenon (2-3/8"/60.5 mm) 4.0"/ 101.6 mm Features • Shafts are structural steel with a minimum yield strength of 46,000 psi. • Heavy duty hinge assembly secures upper section to lower section with high strength 3/4”/19.05 mm Dia. bolt. A flexible protective channel is provided to protect wires when pole is lowered. • Pole counter-balance is designed to offset weight of luminaires and is made from steel with minimum yield strength of 36,000 psi. • Base plates are of structural quality hot-rolled steel with minimum yield strength of 36,000 psi. • A 3” x 5”/76.2 x 127 mm reinforced handhole with cover and grounding lug 14”/355.6 mm above the pole base is standard. • Anchor bolts are furnished complete with nuts and washers, and are of 50,000 psi steel. Standard Finishes • Poles are finished with red-oxide prime-paint after fabrication Options 14.0"/ 355.6 mm • For bronze powder coat finish (to match Appleton fixtures) add suffix -EPX. For galvanized finish add -GAL. • An optional lowering winch is available and recommended for easy one-man operation of hinged poles. (Only one lowering winch per installation is required because winch assembly mounts from pole to pole and dismounts for easy storage.) Lowering winch is furnished with mounting hardware, 25 feet/7.62 m of 3/16”/4.8 mm galvanized wire rope and safety snap hook. Accessory: GLW – Lowering Device (Winch) Dimensions may vary. Consult your local sales representative for specifications Mounting Height ft/m A Shaft Size (In.Sq./mm.Sq. x Ga.) Base Base Size Bolt Circle Thickness Bolt Proj. In. Sq/mm. Sq In/mm In/mm In/mm S➊ BC T P F E 20/6.1 4/2580.6 x 7 4/2580.6 x 11 10.0/6451.6 ➊ .75/19.1 20/6.1 5/3225.8 x 7 5/3225.8 x 11 11.5/7419.3 ➊ 1.0/25.4 2.25/57.2 24/7.32 4/2580.6 x 7 4/2580.6 x 11 10.0/6451.6. ➊ .75/19.1 24/7.32 6/3871.0 x 7 6/3871.0 x 11 12.0/7741.9 ➊ 1.0/25.4 2.25/57.2 30/9.14 4/2580.6 x 7 4/2580.6 x 11 10.0/6541.6 ➊ .75/19.1 30/9.14 6/3871.0 x 7 6/3871.0 x 11 12.0/7741.9 ➊ 1.0/25.4 2.25/57.2 35/10.67 6/3871.0 x 7 6/3871.0 x 11 12.0/7741.9 ➊ 1.0/25.4 2.25/57.2 2.0/50.8 2.0/50.8 2.0/50.8 Anchor Bolt Max. Dia. x Lgth. Proj Area In/mm Sq.Ft./Sq.M. ➌ .75 x 28/ 9.3/0.86 19.1 x 711.2 1.0 x 40/ 15.2/1.4 25.4 x 1016 .75 x 28/ 6.1/0.57 19.1 x 711.2 1.0 x 40/ 14.3/1.33 25.4 x 1016 .75 x 28/ 2.9/0.27 19.1 x 711.2 1.0 x 40/ 10.8/1.00 25.4 x 1016 1.0 x 40/ 3.6/0.33 25.4 x 1016 Loading Weight lbs/kgs Catalog Number ➋ 230/104.3 G-PHSM-20 350/158.8 G-PHSH-20 170/77.1 G-PHSM-24 280/127.0 G-PHSH-24 150/68.0 G-PHSM-30 240/108.9 G-PHSH-30 180/81.6 G-PHSH-35 ➊ Dimensions may vary—Consult your local sales representative for specifications. ➋ Anchor bolts and nuts are furnished. For accessory lowering winch, specify Cat. No. GLW. ➌ Calculated for winds of 100 MPH/160 KPH. 1400 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Square Tapered Steel Poles Applications • To mount single or multiple luminaires to heights from 20 to 39 feet/6.1 to 11.9 meters. 4.0"/ 101.6 mm 2"/50.8 mm Pipe Size Tenon (2-3/8"/60.5 mm O.D) Lighting: General Lighting — Area — Poles and Hangers • 2”/0.61 mm pipe size tenon accepts a single luminaire or 2, 3, or 4 luminaires with appropriate pole-top mounting bracket. • High strength shafts have a uniform taper and are made from 11 gauge commercial quality hot rolled steel. • Base plates are of structural quality hot rolled steel with minimum yield strength of 36,000 psi. • A 3” x 5”/76.2 x 127 mm reinforced handhole with cover and grounding lug 14”/355.6 mm above the pole base is standard. • Anchor bolts are furnished complete with nuts and washers, and are of 55,000 psi steel. Lighting Features Standard Finishes • Poles are finished with red-oxide prime-paint after fabrication Options • For bronze powder coat finish (to match Appleton fixtures) add Suffix -EPX. For galvanized finish add suffix -GAL. 14.0"/ 355.6 mm Dimensions may vary. Consult your local sales representative for specifications Mounting Height Ft/M A Shaft Size ➊ Sq.In./Sq.MM. x Ft/M Base Size In/mm S➋ Bolt Circle In/mm BC Base Thickness In/mm T➋ Bolt Proj. In/mm P➋ Anchor Bolt Dia. x Lgth. In/mm Max. Proj Area Sq.Ft/Sq.M ➌ Catalog Number ➍ 20/6.1 5.25 x 3.25 x 20’/ 3387 x 2097 x 6.1 10.5/266.7 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016.0 9.4/0.87 G-PSTH-20 24/7.3 6.25 x 3.85 x 24’/ 4032 x 2484 x 12.2 13.0/330.2 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016.0 8.9/0.83 G-PSTH-24 30/9.1 6.65 x 3.25 x 30’/ 4290 x 2097 x 9.1 12.0/304.8 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016.0 5.8/0.54 G-PSTH-30 35/10.7 6.25 x 3.25 x 35’/ 4032 x 2097 x 10.7 13.0/330.2 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016.0 4.4/0.41 G-PSTH-35 39/11.9 7.15 x 3.25 x 39’ 4613 x 2097 x 11.9 13.0/330.2 ➋ 1.0/25.4 2.50/63.5 1 x 40/ 25.4 x 1016.0 3.8/0.35 G-PSTH-39 ➊ Shaft bottom (Sq. In.) x shaft top (Sq. In.) x shaft length to tenon. ➋ Dimensions may vary—Consult your local sales representative for specifications. ➌ Calculated for winds of 100 MPH. ➍ Anchor bolts and nuts are furnished. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1401 Square Steel Poles Applications Lighting: General Lighting — Area — Poles and Hangers Lighting • To mount single or multiple luminaires to heights from 14 to 30 feet/4.3 to 9.1 meters. Features 4.0"/ 101.6 mm • 2”/50.8 mm pipe size tenon accepts a single luminaire, or 2, 3, or 4 luminaires with appropriate pole-top mounting bracket. • High strength shafts are made from square steel structural tube with minimum yield strength of 46,000 psi. • Base plates are of structural quality hot-rolled steel with minimum yield strength of 36,000 psi. • A 3” x 5”/76.2 x 127 mm reinforced handhole with cover and grounding lug 14”/355.6 mm above the pole base is standard. • Anchor bolts are furnished complete with nuts and washers, and are of 55,000 psi steel. 2"/50.8 mm Pipe Size Tenon (2-3/8"/60.5 mm) Standard Finishes • Poles are finished with red-oxide prime-paint after fabrication Options • For bronze powder coat finish (to match Appleton fixtures) add Suffix -EPX. For galvanized finish add suffix -GAL. 14.0"/ 355.6 mm Dimensions may vary. Consult your local sales representative for specifications Mounting Height Ft/M A Shaft Size ➊ In/mm Base Size In/mm S➋ Bolt Circle In/mm BC Base Thickness In/mm T➋ Bolt Proj. In/mm P➋ Anchor Bolt Dia. x Lgth. In/mm Max. Proj Area Sq.Ft./Sq.M. ➌ Catalog Number ➍ 14/4.3 4” x 4” x 11Ga./ 101.6 x 101.6 x 11Ga. 8.0/203.2 ➋ .75/19.1 2.00/50.8 .75 x 20/ 19.1 x 508.0 10.9/1.01 G-PSSM-14 14/4.3 4” x 4” x 7Ga./ 101.6 x 101.6 x 11Ga. 8.0/203.2 ➋ .75/19.1 2.00/50.8 .75 x 20/ 19.1 x 508.0 14.4/1.34 G-PSSH-14 17/5.2 4” x 4” x 11Ga./ 101.6 x 101.6 x 11Ga. 8.0/203.2 ➋ .75/19.1 2.00/50.8 .75 x 20/ 19.1 x 508.0 6.9/0.64 G-PSSM-17 17/5.2 4” x 4” x 7Ga./ 101.6 x 101.6 x 7Ga. 8.0/203.2 ➋ .75/19.1 2.00/50.8 .75 x 20/ 19.1 x 508.0 11.9/1.11 G-PSSH-17 20/6.1 4” x 4” x 7Ga./ 101.6 x 101.6 x 7Ga. 8.0/203.2 ➋ .75/19.1 2.00/50.8 .75 x 20/ 19.1 x 508.0 10.1/0.94 G-PSSM-20 20/6.1 5” x 5” x 7Ga./ 127.0 x 127.0 x 7Ga. 11/279.4 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016 17.2/1.60 G-PSSH-20 24/7.3 5” x 5” x 7Ga./ 127.0 x 127.0 x 11Ga. 11/279.4 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016 11.9/1.11 G-PSSM-24 24/7.3 6” x 6” x 7Ga./ 152.4 x 152.4 x 7Ga. 12.0/304.8 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016 18.8/1.75 G-PSSH-24 30/9.1 5” x 5” x 7Ga./ 127.0 x 127.0 x 7Ga. 11/279.4 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016 6.9/0.64 G-PSSM-30 30/9.1 6” x 6” x 7Ga./ 152.4 x 152.4 x 7Ga. 12.0/304.8 ➋ 1.0/25.4 2.25/57.2 1 x 40/ 25.4 x 1016 11.7/1.09 G-PSSH-30 ➊ Shaft bottom (Sq. In.) x shaft top (Sq. In.) x shaft length to tenon. ➋ Dimensions may vary—Consult your local sales representative for specifications. ➌ Calculated for winds of 100 MPH. ➍ Anchor bolts and nuts are furnished. 1402 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Floodlight Mounting Brackets Single or Multiple Installation on Wall, Wood or Metal Poles Metal Pole Brackets Lighting Lighting: General Lighting — Area — Poles and Hangers Wood Pole Brackets Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1403 Floodlight Mounting Brackets Single or Multiple Installation on Wall, Wood or Metal Poles Lighting Poletop Brackets for Metal Poles — Dimensions may vary. Consult your local sales representative for specifications Floodlight mounting brackets for installation of 2 to 4 floodlights atop metal poles are manufactured from high-strength steel tube, and slip-fit onto 2”/50.8 mm pipe size poletop tenons. Furnished with 3 locking setscrews and red oxide prime coat finish. Bracket tenon is 2”/50.8 mm pipe size (2-3/8”/60.5 mm O.D.). Dimensions 17.0"/ 431.8 mm Description 17.0"/ 431.8 mm 10.0"/ 254.0 mm Lighting: General Lighting — Area — Poles and Hangers Catalog Number Poletop Bracket for Two Luminaires G-PB-2 Poletop Bracket for Three Luminaires G-PB-3 Poletop Bracket for Three Luminaires (120° apart) G-PB-3-120 Poletop Bracket for Four Luminaires (in line) G-PB-14 Poletop Bracket for Four Luminaires G-PB-4 1.0"/25.4 mm 5.0"/ 127.0 mm (3) 3/8"/9.7 mm x 5/8"/16.0 mm Setscrews at 120 ° Slip-Fitter for 2"/50.8 mm Std. Pipe 17.0"/ 431.8 mm 17.0"/ 431.8 mm 2.0"/ 50.8 mm Std. Pipe 20.0"/ 508.0 mm 10.0"/ 254.0 mm 1.0"/25.4 mm 5.0"/ 127.0 mm Slip-Fitter for 2"/50.8 mm Std. Pipe (3) 3/8"/9.7 mm x 5/8"/16.0 mm Setscrews at 120 ° 17.0"/ 431.8 mm R. 30.0"/ 762.0 mm 10.0"/ 254.0 mm 30.0"/ 762.0 mm 1-1/8"/ 28.7 mm Dia. Hole for wiring 30.0"/ 762.0 mm 2.0"/ 50.8 mm Std. Pipe 1.0"/25.4 mm 5.0"/ 127.0 mm (3) 3/8"/9.7 mm x 5/8"/16.0 mm Setscrews at 120 ° 17.0"/ 431.8 mm R 10.0"/ 254.0 mm Slip-Fitter for 2"/50.8 mm Std. Pipe 34.0"/ 863.6 mm 2.0"/ Removable 50.8 mm Cap Std. Pipe 5.0"/ 127.0 mm Slip-Fitter for 2"/50.8 mm Std. Pipe 1404 0.5"/12.7 mm (3) 3/8"/9.7mm x 5/8"/16.0 mm Setscrews at 120 ° Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Floodlight Mounting Brackets Single or Multiple Installation on Wall, Wood or Metal Poles Poletop Reducers Made from high strength steel tubing, complete with 3 locking setscrews and with red-oxide prime finish. Poletop Pipe Size Reduction In/mm Catalog Number 2-1/2 to 2/63.5 to 50.8 G-PR-2-1/2 Lighting Dimensions — May vary. Consult your local sales representative for specifications 2"/50.8 mm Pipe Size (2-3/8"/60.5 mm O.D.) G-PR-3 3 to 2/76.2 to 50.8 4.0"/ 101.6 mm G-PR-3-1/2 3-1/2 to 2/88.9 to 50.8 G-PR-4 5 to 2/127 to 50.8 G-PR-5 4.0"/ 101.6 mm 8.0"/ 203.2 mm Lite Mount Bars for 4, 8, or 12 Quartzlite or Areamaster Jr. Floodlights Bars have 11 gauge steel body and 12 gauge steel cover. Two styles: to mount on 2”/50.8 mm pipe size poletop tenon, or on wood poles using thru-bolts. Welded construction, with 3/4”/19.1 mm N.P.S. tapped hubs. Rain-tight, with red-oxide prime finish. Dimensions — May vary. Consult your local sales representative for specifications Number of Fixtures Length A Dim. B Dim C Dim. D 4 28 – 25 1-1/2 8 60 17 24-1/2 1-1/4 12 96 17 25 1-1/2 For Metal Poles 4.0"/ 101.6 mm Dimensions For Mounting Quartzlites or Areamaster Jr. Number of Fixtures For Mounting Catalog Number Metal Pole Wood Pole 4 Fixtures G-PQM-4T G-PQM-4W 8 Fixtures G-PQM-8T G-PQM-8W 12 Fixtures G-PQM-12T G-PQM-12W Bar Assembly for 2"/50.8 mm Pipe Size Tenon (3) Setscrews 2"x4"/50.8 x 101.6 mm Access Door NPT Light Mount Type For Wood Poles NPT Light Mount Type 11.0"/ 279.4 mm 2"x4"/ 50.8 x 101.6 mm Access Door 11/16"/17.5 mm Dia. Holes 4.0"/ 101.6 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1405 Lighting: General Lighting — Area — Poles and Hangers 4 to 2/101.6 to 50.8 Floodlight Mounting Brackets Single or Multiple Installation on Wall, Wood or Metal Poles Dimensions may vary. Consult your local sales representative for specifications Description Lighting For Floodlights with 2”/50.8 mm Slip-Fitter, or will mount G-PB Series brackets with floodlights. • Complete with two 13”/330.2 mm-long bolts, washers, and nuts. • Red oxide prime coat finish. Lighting: General Lighting — Area — Poles and Hangers 8-1/2"/ 215.9 mm 8.0"/ 203.2 mm Catalog Number Wood Pole or Wall Mounting Bracket 5.0"/ 127.0 mm 2"/50.8 mm Pipe 7-1/2"/ 190.5 mm G-PCB-1 G-PWB-1 Wood Pole Clamp Brackets • Pole clamping floodlight mounting brackets constructed of 2”/50.8 mm steel pipe. • Furnished complete with clamping bolts and nuts. • Has red oxide primer coat finish. • For 1 to 3 floodlights—Fits 6”/152.4 mm to 9”/228.6 mm poles. • For 4 floodlights—Fits 9”/228.6 mm to 12”/304.8 mm poles. 1 Arm G-PCB-1 2 Arm G-PCB-2 3 Arm G-PCB-3 4 Arm G-PCB-4 G-PCB-2 G-PCB-3 G-PCB-4 6"/152.4 mm Channel @ 8.2 lbs/3.7 kgs 6.0"/ 152.4 mm 24.0"/ 609.6 mm 9/16"/0.56 mm Dia. holes for floodlight mounting 24.0"/ 609.6 mm 1-1/2"/ 38.1 mm 9.0"/228.6 mm 24.0"/ 609.6 mm 6.0"/ 152.4 mm Mounting arm made of rugged angular steel stock with 1/4” supporting struts. Has hot-dipped galvanized finish. Furnished with all nuts and bolts to assemble and install bracket to wood pole. 2 holes, 7/8"/ 22.4 mm Dia. (3/4"/19.1 mm Dia. thru-bolts furnished) 12.0"/304.8 mm 4" x 3"x 1/4"/ 101.6 x 76.2 x 6.4 mm Angle 1406 Wood Pole Crossarm Lite Mount Bracket 4-Lite G-PCAB-4 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 AHG and UNJ Flexible Fixture Hangers Malleable Iron. Ball Type.:15° Swing. Cushion Type: 8° Swing UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • AHG cushion hangers are enclosed and gasketed—ideal where dust and dampness are present. Features AHG5050 UNJ-50 Illustrated Features Lighting • All hangers — All fixture hangers protect fixture against wind and vibration damage. — Cushion type for added protection where lighting fixtures are subjected to vibration. • AHG hangers — Enclosed and gasketed. — Neoprene diaphragm keeps moisture and dirt out of system. — Cushion type permits 8° swing from vertical. • UNJ hangers — Economical general purpose hanger. — Permits 15° swing. Standard Materials • AHG fixture hangers: malleable iron • UNJ fixture hangers: malleable iron and steel Standard Finishes Lighting: Flexible Fixture Hangers — Ordinary Location • AHG: triple-coat—(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • UNJ: malleable iron and steel parts, zinc electroplate and clear chromate Certifications and Compliances • CSA Certified: 065180 (UNJ) • UL Listed: E109438 (AWG) Fixture Stem Size (Inches) Male Nipple Size (Inches) Length A in/mm Support Weight (lbs/kg) Catalog Number AHG — Fixture Hangers — Cushion Type — Enclosed and Gasketed — Cushions 40 lbs./18.0 kg. A 1/2 1/2 3.19/81.0 1/2 3/4 3.19/81.0 3/4 3/4 3.19/81.0 AHG5050 40/18 AHG7550 AHG7575 Cushion UNJ — Fixture Hangers — Malleable Iron and Steel — Ball Type 1/2 1/2 4.00/101.6 3/4 3/4 4.00/101.6 120/54 UNJ-50 UNJ-75 A Ball Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1407 AL Ball and Cushion Flexible Fixture Hangers UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Ball Joint Permits 20° Swing. Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. • Functions as combination conduit outlet box and hanger. Lighting Features • Protects fixture against wind and vibration damage. • Cushion type for added protection where lighting fixtures are subjected to vibration. • Dual function—conduit outlet box and fixture hanger. • Choice of ball or cushion type. • Swivel joint construction—allows 20° swing from vertical. • Cushion style, with conical spring, supports up to 120 lbs/54 kg. • Cushion type has setscrew for locking fixture stem. • Fixture and hanger stem can be wired at work bench. • Connection block available for convenient wiring of fixture leads. ALA — Ball Hanger ALC — Ball Hanger ALL — Cushion Hanger ALT — Cushion Hanger Standard Materials • Malleable iron with steel cover Standard Finishes Lighting: Flexible Fixture Hangers — Ordinary Location • Malleable iron parts: triple-coat—(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • Steel parts: zinc electroplate Certifications and Compliances • UL Listed: E109438 Illustrated Features 1408 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 AL Ball and Cushion Flexible Fixture Hangers UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Ball Joint Permits 20° Swing. Conduit Size (Inches) Fixture Stem Size (Inches) Support Weight (lbs/kg) Catalog Number ALA — Ball Hanger 1/2 1/2 3/4 1/2 3/4 3/4 250/112.5 250/112.5 ALA50-B ALA7550-B ALA75-B ALA — Cushion Hanger — Furnished with a 3/4” to 1/2 reducer for 1/2” stems 1/2 3/4 or 1/2 3/4 3/4 or 1/2 3/4 or 1/2 3/4 or 1/2 1/2 3/4 or 1/2 3/4 3/4 or 1/2 1/2 1/2 3/4 1/2 1 1/2 3/4 3/4 1 3/4 12 to 48/5.4 to 21.6 48 to 120/21.6 to 54.0 ALA50-12 ALA7575-12 ALA50-48 Lighting 1/2 3/4 3 to 12/1.4 to 5.4 ALA7575-48 ALA50-120 ALA7575-120 Lighting: Flexible Fixture Hangers — Ordinary Location ALC — Ball Hanger ALC50-B 250/112.5 ALC7550-B ALC1050-B 250/112.5 ALC75-B ALC1075-B ALC — Cushion Hanger — Furnished with a 3/4” to 1/2” reducer for 1/2” stems 1/2 3/4 or 1/2 3/4 3/4 or 1/2 ALC50-12 3 to 12/1.4 to 5.4 ALC7575-12 1 3/4 or 1/2 ALC1075-12 1/2 3/4 or 1/2 ALC50-48 3/4 3/4 or 1/2 1 3/4 or 1/2 1/2 3/4 or 1/2 3/4 3/4 or 1/2 1 3/4 or 1/2 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 12 to 48/5.4 to 21.6 ALC7575-48 ALC1075-48 ALC50-120 48 to 120/21.6 to 54.0 ALC7575-120 ALC1075-120 1409 AL Ball and Cushion Flexible Fixture Hangers UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Ball Joint Permits 20° Swing. Conduit Size (Inches) Fixture Stem Size (Inches) 1/2 1/2 Support Weight (lbs/kg) Catalog Number ALL — Ball Hanger 3/4 1/2 3/4 3/4 250/112.5 250/112.5 ALL50-B ALL7550-B ALL75-B Lighting: Flexible Fixture Hangers — Ordinary Location Lighting ALL — Cushion Hanger — Furnished with a 3/4” to 1/2” reducer for 1/2” stems 1/2 3/4 or 1/2 3/4 3/4 or 1/2 1/2 3/4 or 1/2 3/4 3/4 or 1/2 1/2 3/4 or 1/2 3/4 3/4 or 1/2 1/2 1/2 3/4 1/2 1 1/2 3/4 3/4 3 to 12/1.4 to 5.4 12 to 48/5.4 to 21.6 48 to 120/21.6 to 54 ALL50-12 ALL7575-12 ALL50-48 ALL7575-48 ALL50-120 ALL7575-120 ALT — Ball Hanger 1 ALT50-B 250/112.5 ALT7550-B ALT1050-B ALT75-B 250/112.5 3/4 ALT1075-B ALT — Cushion Hanger — Furnished with a 3/4” to 1/2” reducer for 1/2” stems 1410 1/2 3/4 or 1/2 3/4 3/4 or 1/2 1 3/4 or 1/2 1/2 3/4 or 1/2 3/4 3/4 or 1/2 ALT50-12 3 to 12/1.4 to 5.4 ALT7575-12 ALT1075-12 ALT50-48 12 to 48/5.4 to 21.6 ALT7575-48 1 3/4 or 1/2 ALT1075-48 1/2 3/4 or 1/2 ALT50-120 3/4 3/4 or 1/2 1 3/4 or 1/2 48 to 120/21.6 to 54 ALT7575-120 ALT1075-120 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 AL Flexible Fixture Hanger Parts and Dimensions UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Size (Inches) AL — Hanger Bodies ALA ALC ALL Catalog Number 1/2 ALA50 3/4 ALA75 1/2 ALC50 3/4 ALC75 1 ALC100 1/2 ALL50 3/4 ALL75 1/2 ALT50 3/4 ALT75 1 ALT100 Lighting ALT Support Weight (lbs/kg) Lighting: Flexible Fixture Hangers — Ordinary Location AL — Ball Fixture Stem BJ50 1/2 250/112.5 3/4 BJ75 AL — Cushion Fixture Stems Fixture stem tapped for 3/4”; 3/4” to 1/2" reducer furnished for 1/2” stems. With setscrew for locking fixture stem. 3/4 or 1/2 3-12 / 1.4-5.4 CJC75-12 3/4 or 1/2 12-48 / 5.4-21.6 CJC75-48 3/4 or 1/2 48-120 / 21.6-54.0 CJC75-120 AL — Porcelain Connection Block 2 Wire, 20 Amp, 277 Volt Maximum Wire Size Two No. 10 AWG Large Terminal Two No. 14 AWG Small Terminal CB202 AL Fixture Hanger Dimensions Top View .88"/ 22.4 mm 1.81"/ 46.0 mm 2.0"/ 50.8 mm Conduit Trade Size .25"/6.4 mm Dia. .88"/ 22.4 mm Front View Cushion Stem .25"/ 6.4 mm 3.00"/ 76.2 mm 4.13"/ 104.9 mm Dimensions in Inches/Millimeters A B 1/2” 0.56/4.2 0.69/17.5 3/4” 0.69/17.5 0.69/17.5 1” 0.88/22.4 0.81/20.6 7.38"/ 187.5 mm 4.00"/ 101.6 mm Side View Ball Stem Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1411 JB and GS Flexible Fixture Hangers Malleable Iron. Ball Type, 15° Swing; Cushion Type, 8° Swing UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • JB, GS and AHG cushion hangers are enclosed and gasketed— ideal where dust and dampness are present. • JB and GS hangers designed for use with JB and GS boxes. Lighting Features • All hangers — All fixture hangers protect fixture against wind and vibration damage. — Cushion type for added protection where lighting fixtures are subjected to vibration. • JB and GS hangers — Mount directly to JB and GS cast conduit outlet boxes. — Choice of ball or cushion type. — Ball type permits 15° swing, cushion type 8° swing from vertical — Cushion type is enclosed and gasketed. JBK-50-BS JBK-50-CS GSK-50-20B GSK-50-20C Standard Materials • Malleable iron Lighting: Flexible Fixture Hangers — Ordinary Location Standard Finishes • GS: triple-coat—(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • JB series support: zinc electroplate and clear chromate Certifications and Compliances • JB and GS cushion type hangers suitable for classified location use in Class I, Division 2 areas, if installed in compliance with NEC 501-9(b) • CSA Certified: 065180 • UL Listed: E109438 Illustrated Features Mercmaster HID Lighting Fixture 1412 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 JB and GS Flexible Fixture Hangers Malleable Iron. Ball Type, 15° Swing; Cushion Type, 8° Swing UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Fixture Stem Size (Inches) Male Nipple Size (Inches) Length A in/mm Support Weight (lbs/kg) Catalog Number JB—Fixture Hanger Covers — For use with JBX, JBDX and JBLX bodies — Furnished with gasket and screws Ball Type A 1/2 2.56/65.0 250/113 JBK-50-BS 3/4 2.56/65.0 . JBK-75-BS 40/18 JBK-50-CS Cushion Type Enclosed and gasketed. Cushions 40 lbs./18.0 kg. A 1.63/41.4 3/4 1.63/41.4 JBK-75-CS GS—Fixture Hanger Covers (Form 20) — For use with GS and GSU bodies — Furnished with gasket and screws Lighting 1/2 Ball Type A 1/2 3.00/76.2 3/4 3.25/82.6 250/113 GSK-50-20B GSK-75-20B A Enclosed and gasketed. Cushions 40 lbs./18.0 kg. 1/2 2.00/50.8 3/4 2.00/50.8 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 40/18 GSK-50-20C GSK-75-20C 1413 Lighting: Flexible Fixture Hangers — Ordinary Location Cushion Type SSH Flexible Fixture Hangers Heavy Duty Outlet Box Swivel. Ball Joint Swivel Permits 20° Swing UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. • SSH heavy duty swivel hangers for mounting to outlet and concrete boxes. Features • Protect fixture against wind and vibration damage. • Cushion type for added protection where lighting fixtures are subjected to vibration. • Heavy duty—support fixtures up to 50 lbs/22.7 kg. • Steel plate serves as cover for outlet or concrete box. • Ball type swivel joint permits 20°swing from vertical. Standard Materials Lighting • Malleable iron and steel 11360 11362 Standard Finishes • Malleable iron and steel parts: zinc electroplate and clear chromate Lighting: Flexible Fixture Hangers — Ordinary Location Certifications and Compliances • CSA Certified: 065180 • UL Listed: E2527 • UL Standard: 514A Illustrated Features Industrial lighting installations often employ the use of extra heavy fixtures requiring a properly anchored swivel attachment, assuring positive safety to carry the necessary weight. In the Type “SSH” Safety Swivel Hanger, the weight of the entire suspended unit is borne by a fixture stud instead of relying upon the screws and screw ears of the box or ring for support. The “SSH” hanger is furnished with a steel plate to serve as a cover for the 4” Concrete, Octagonal, and 4-11/16” Square boxes. Cat. No. 11360 Safety Swivel Hanger installed in OCR3-1/2 Concrete Box with OCP3/8 Plate 1414 Cat. No. 11362 Safety Swivel Hanger installed in a 4-11/16” Square Box shown with NBFS-38 (not included) Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 SSH Flexible Fixture Hangers Heavy Duty Outlet Box Swivel. Ball Joint Swivel Permits 20° Swing UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Fixture Stem Size (Inches) Fixture Stud Size (Inches) Length A in/mm Support Weight (lbs/kg) Catalog Number 2.19/55.6 50/22.5 11360 50/22.5 11355 50/22.5 11362 Concrete Box — Safety Swivel Hanger — For Concrete Box 2-1/2” to 4” Deep 1/2 3/8 A 1/2 3/8 2.19/55.6 Lighting Octagonal Box — Safety Swivel Hanger — For 4” Octagonal Box 1-1/2” or 2-1/8” Deep A 1/2 3/8 2.19/55.6 A Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1415 Lighting: Flexible Fixture Hangers — Ordinary Location Square Box — Safety Swivel Hanger — For 4-11/16” Square Box 1-1/2” or 2-1/8” Deep SHC Flexible Fixture Hangers Outlet Box Mounted Series UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. • SHC fixture hanger covers for mounting to 3-1/4” and 4” octagonal boxes and 4” square boxes. Features • Protect fixture against wind and vibration damage. • Cushion type for added protection where lighting fixtures are subjected to vibration. • Ball type swivel joint permits 20° swing from vertical. • Support fixtures with a maximum weight of 50 lbs/22.7 kg. 8438R 8458R Standard Materials Lighting • Steel and malleable iron Standard Finishes • Malleable iron and steel parts: zinc electroplate and clear chromate Illustrated Features Ball Type Swivel Fixture Hanger Covers shown with octagonal and with square stamped steel outlet boxes. Certifications and Compliances Lighting: Flexible Fixture Hangers — Ordinary Location • CSA Certified: 065180 • UL Listed: E2527 • UL Standard: 514A Related Products • For steel boxes, see Commercial Products section. Fixture Stem Size (Inches) Length A in/mm Support Weight (lbs/kg) Catalog Number SHC Ball Type Swivel Hanger Covers — Permit 20° swing from vertical For 3-1/4” and 4” Octagonal Boxes A 1/2 1.75/44.5 50/22.5 8438R 3/4 2.00/50.8 50/22.5 8436R 1/2 1.75/44.5 50/22.5 8458R 3/4 2.00/50.8 50/22.5 8456R For 4” Square Boxes A 1416 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Flexible Fixture Hangers Hook and Loop UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. Features EFHM EFHF FHS Standard Finishes Lighting • Protect fixture against wind and vibration damage. • Cushion type for added protection where lighting fixtures are subjected to vibration. • EF hook and loop hangers — Malleable iron for strength and safety. — Hook and loop combination permits quick disconnect and removal of fixture for maintenance. — Offer inexpensive means of pendant flexible suspension of lighting fixtures. — Permit free swing in any direction. — EF jaw openings can be completely closed for added safety. • FHS support hangers — Provide up to 350 lbs/158.8kg support for fluorescent fixtures on the non-electrical side of mounting. — Straddle a maximum of 1-1/4” conduit and take 1/2” or 3/4” fixture hook or conduit. • Zinc electroplate and clear chromate Certifications and Compliances • CSA Certified: 065180 Standard Materials • Malleable iron Length A (in/mm) Support Weight Lbs./Kg. Catalog Number 1/2 2.63/66.8 200/90.0 EFHM-50 3/4 2.94/74.7 EF — Safety Support Hooks — With 3/8” jaw opening EFHM—Male A EFHM EFHM-75 EFHF—Female A 1/2 2.00/50.8 3/4 2.05/52.1 200/90.0 EFHF-50 EFHF-75 EFHF FHS — Support for Fixtures, Dummy Side — Straddles up to 1-1/4 trade size conduit — 11/32” diameter mounting holes, spaced 3-1/4” apart 1/2 or 3/4 A 3.31/87.1 350/157.5 FHS5075 Dimensions in Inches/Millimeters 0.38"/ 9.7 mm 0.25"/ 6.4 mm R A B C Catalog Number 1/2-14 NPT 2.00/50.8 2.63/66.8 EFHM-50 3/4-14 NPT 2.13/54.1 2.88/73.2 EFHM-75 1/2-14 NPT 2.00/50.8 N/A EFHF-50 3/4-14 NPT 2.13/54.1 N/A EFHF-75 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1417 Lighting: Flexible Fixture Hangers — Ordinary Location Size (Inches) Flexible Fixture Hangers Hook and Loop UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. Lighting Features • Protect fixture against wind and vibration damage. • Cushion type for added protection where lighting fixtures are subjected to vibration. • Malleable iron for strength and safety. • Hook and loop combination permits quick disconnect and removal of fixture for maintenance. • Offer inexpensive means of pendant flexible suspension of lighting fixtures. • Permit free swing in any direction. • EF and FHSN jaw openings can be completely closed for added safety. FHLM FHHM FHSN Standard Materials • Malleable iron Standard Finishes • Zinc electroplate and clear chromate Lighting: Flexible Fixture Hangers — Ordinary Location Certifications and Compliances • CSA Certified: 065180 Illustrated Features 1418 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Flexible Fixture Hangers Hook and Loop UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Size (Inches) Length A (in/mm) Support Weight Lbs/Kg Catalog Number FH — Hanger Loops — With 5/8” diameter wireway FHLM — Male A A FHLM 1/2 3.88/98.6 3/4 4.13/104.9 350/157.5 FHLM-50 FHLM-75 FHLF — Female FHLF 1/2 3.25/82.6 3/4 3.25/82.6 350/157.5 FHLF-50 FHLF-75 Lighting FH — Hanger Hooks — With 5/8” diameter wireway, 3/8” jaw opening FHHM — Male A A 3.88/98.6 4.13/104.9 200/90.0 FHHM-50 FHHM-75 FHHF — Female 1/2 3.25/82.6 3/4 3.25/82.6 200/90.0 FHHF-50 FHHF-75 FHHF FHHCG—Gasketed Fixture Hanger Hook — With 5/8” wire opening, 3/8” jaw opening, safety screw — As FHHM’s above, with internal grommet to prevent moisture and dirt entry FHHCG — Male A 1/2 4.25/108.0 3/4 4.25//108.0 75/34.0 FHHCG-3750-SS FHHCG-3775-SS FHSN — Conduit Suspension Hanger — With safety strap—clamps around rigid conduit or IMC —Has 3/8” jaw opening A 1/2 3.13/79.5 3/4 3.25/82.6 1 3.38/85.9 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 FHSN-50 150/67.5 FHSN-75 FHSN-100 1419 Lighting: Flexible Fixture Hangers — Ordinary Location FHHM 1/2 3/4 Flexible Fixture Hangers Receptacle and Hook and Loop UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. Features • Permit quick disconnect and removal of fixture for maintenance. • Available in pendant or feed-thru. • Available with matching cord set. Standard Materials • Malleable iron with steel cover • Screws: stainless steel Lighting: Flexible Fixture Hangers — Ordinary Location Lighting Standard Finishes • Malleable iron parts: triple-coat—(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • Steel parts: zinc electroplate GHPHP GHPHT GHPHP and GHPHT — Receptacle Hangers Conduit Hub Size (Inches) Catalog Number Voltage Hubbell Plug Pendant Feed-Thru Furnished with assembled FS box, EFHM, safety lock, receptacle, and steel cover. Supports 200 lbs/ 90.7kg. 8.5” 215.9mm GHPHP 6.06” 153.9mm 3/4 120 L5-15P GHPHP12 GHPHT12 3/4 208, 240 L6-15P GHPHP24 GHPHT24 3/4 277 L7-15P GHPHP27 GHPHT27 3/4 347 L37-20P GHPHP34 V GHPHT34 V 3/4 480 L8-20P GHPHP48 GHPHT48 3/4 600 L9-20P GHPHP60 V GHPHT60 V GHPHT Cord Sets — With Loop —Supplied with 600 V, 90°C 3 conductor No. 16 SOW cable, locking plug and 3/4" FHLM loop 1420 Voltage Amperes 2'/0.6 m Cord 3'/0.9 m Cord 4'/1.21 m Cord 120 15 G-HCPL-2-12 G-HCPL-3-12 G-HCPL-4-12 208, 240 15 G-HCPL-2-24 G-HCPL-3-24 G-HCPL-4-24 277 15 G-HCPL-2-27 G-HCPL-3-27 G-HCPL-4-27 347 20 G-HCPL-2-34 V G-HCPL-3-34 V G-HCPL-4-34 V 480 20 G-HCPL-2-48 G-HCPL-3-48 G-HCPL-4-48 600 20 G-HCPL-2-60 V G-HCPL-3-60 V G-HCPL-4-60 V Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Power Hook for Industrial High Bay Luminaires V Furnished with Receptacle, Plug, 18" 16-3 SO Cord and Loop Fixture Hanger Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. Features Lighting • All hangers — All fixture hangers protect fixture against wind and vibration damage. — Cushion type for added protection where lighting fixtures are subjected to vibration. • G-HBPH power hook for industrial luminaires — Loop that suspends fixture cannot be removed until plug is disconnected from power receptacle. — 20 Amp plug, receptacle and cable are provided in all voltages. — Rotating plug after insertion locks plug in receptacle, eliminating plug fall-out. — Loop and hook provide flexible mounting, ideal in areas where vibration is encountered. Standard Materials • Copperfree (4/10 of 1% max.) cast aluminum Standard Finishes Lighting: Flexible Fixture Hangers — Ordinary Location • Powder coat epoxy Certifications and Compliances • CSA Approved Size (Inches) Voltage Catalog Number 3/4 120 G-HBPH-120 3/4 208 G-HBPH-208 3/4 240 G-HBPH-240 3/4 277 G-HBPH-277 3/4 347 G-HBPH-347 3/4 480 G-HBPH-480 3/4 600 G-HBPH-600 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1421 BKX Rigid Fixture Hangers V UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Class II, Division 1 and 2, Groups E, F, G Class III, Enclosure 4 Applications • Designed for suspension of HID, fluorescent and incandescent lighting fixtures. Features • All fixture hangers protect fixture against wind and vibration damage. • Cushion type for added protection where lighting fixtures are subjected to vibration. • Available in three depths. • Accepts JB covers for ordinary location and AHG hangers for Class II hazardous locations. BKX Shallow Box BKX Deep Box Standard Materials • Ferrous alloy and copperfree aluminum Certifications and Compliances Lighting: Flexible Fixture Hangers — Explosionproof Lighting • CSA Approved 1422 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 BKX Rigid Fixture Hangers V UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Class II, Division 1 and 2, Groups E, F, G Class III, Enclosure 4 Furnished with gasketed cover, four threaded conduit entries and 2 close-up plugs Fixture Stem Size (Inches) Hub Size (Inches) Enclosure Only Ferrous Alloy Catalog Number Enclosure Only With Cover Aluminum Ferrous Alloy With Cover Aluminum Shallow Box — 2-1/16 1/2 1/2 BKXS-1 BKXS-1A BKXS-11 BKXS-11A 1/2 3/4 BKXS-2 BKXS-2A BKXS-21 BKXS-21A 3/4 3/4 BKXS-2 BKXS-2A BKXS-22 BKXS-22A Medium Box — 2-11/16 1/2 1/2 BKXM-1 BKXM-1A BKXM-11 BKXM-11A 1/2 3/4 BKXM-2 BKXM-2A BKXM-21 BKXM-21A 1/2 1 BKXM-3 BKXM-3A BKXM-31 BKXM-31A 3/4 3/4 BKXM-2 BKXM-2A BKXM-22 BKXM-22A 3/4 1 BKXM-3 BKXM-3A BKXM-32 BKXM-32A 1/2 1/2 BKXD-1 BKXD-1A BKXD-11 BKXD-11A 1/2 3/4 BKXD-2 BKXD-2A BKXD-21 BKXD-21A Deep Box — 3-9/16 1 BKXD-3 BKXD-3A BKXD-31 BKXD-31A 3/4 BKXD-2 BKXD-2A BKXD-22 BKXD-22A 3/4 1 BKXD-3 BKXD-3A BKXD-32 BKXD-32A Lighting 1/2 3/4 Covers with Gasket Attached — — CBK-1G CBK-1GA — — CBK-2G CBK-2GA Dimensions in Inches/Millimeters Catalog Number A B BKXS 1.31/33.3 1.50/38.1 BKXM 1.56/39.6 2.25/57.2 BKXD 1.56/39.6 3.00/76.2 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1423 Lighting: Flexible Fixture Hangers — Explosionproof 1/2 3/4 CPU and EFHU Fixture Hangers Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. Class I, Division 1 and 2,Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • Fixture hangers and accessories for suspension of industrial type HID, incandescent, and fluorescent lighting fixtures in Class I, Class II, and Class III classified locations. • Suitable for use in areas where moisture, dust and corrosive atmospheres are present. • CPU and EFHU, EFHC, have smooth, rounded integral bushing in each hub to protect conductor insulation. Lighting Features • Boxes have cast mounting lugs. Box and hub cover provide a complete assembly for suspending lighting fixtures in classified locations. • CPU20 Hangers are used where fixture stem is less than 12” long or with EXJF, ESD, or ESS where fixture stem is more than 12” long. • EFHU Flexible Hangers meet NEC Sec. 501 requirement for flexible suspension where fixture stem is more than 12” long. • Cushion design protects against vibration, and swivel action (any direction up to 15° from vertical) protects fixture if accidentally struck. • EFHU Flexible Cushion Hangers available in three spring ranges to support fixture weights of 12 to 48 lbs / 5.4kg to 21.8kg and 48 to 120 lbs / 21.8kg to 54.4kg. • CB205 Connection Block available for connecting all wires without splices. • Ground-joint mating surfaces assure flame-tight fit. • Hanger has setscrew in stem hub to prevent fixture stem from turning. CPU EFHU Illustrated Features Standard Materials • CPU and EFHU: malleable iron or copperfree (4/10 of 1% max. aluminum • EFHU flexible hanger: brass fixture stem hub assembly Lighting: Flexible Fixture Hangers — Explosionproof Standard Finishes • CPU20 rigid fixture hangers body: triple-coat – 1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • CPU20 rigid fixture hangers cover: zinc electroplate and clear chromate • Separate CPU20 covers: zinc electroplate and clear chromate. • EFHU flexible cushion fixture hangers: triple-coat – 1) zinc electroplate, (2) chromate, and (3) epoxy powder coat Certifications and Compliances • UL Listed: E10444 • UL Standard: 886 • Suitable for Class I, Division 1 and 2, if installed in compliance with NEC 501-9(a)(b) and for Class II, Division 1 and 2, if in compliance with NEC 502-11(a)(b) ® 1424 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 CPU and EFHU Fixture Hangers Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. Class I, Division 1 and 2,Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEC Catalog Number Conduit Size (Inches) Fixture Stem Size (Inches) Support Weight (lbs/kg) Malleable Iron CSA Catalog Number Malleable Iron V Aluminum CPU Fixture Hangers — Non-Flexible Type — Form 20 Furnished with cast mounting lugs, four threaded universal 3/4” hubs, four 3/4” to 1/2” reducers, and three 1/2” close-up plugs. 1/2 or 3/4 1/2 250/112.5 CPU20-50 CPU20-50CN CPU20-50ACN 1/2 or 3/4 3/4 250/112.5 CPU20-75 CPU20-75CN CPU20-75ACN EFHU Fixture Hangers — Flexible Cushion Type — Form 20 Furnished with cast mounting lugs, four threaded universal 3/4” hubs, four 3/4” to 1/2” reducers, and three 1/2” close-up plugs. 1/2 or 3/4 3/4 1/2 or 3/4 3/4 12 to 48/ EFHU75-48 EFHU75-48CN — 21.8 to 54.0 EFHU75-120 EFHU75-120CN — 1/2 250/112.5 CPSK20-50 CPSK20-50ACN CPSK20-50ACN 3/4 250/112.5 CPSK20-75 CPSK20-75ACN CPSK20-75ACN 5.4 to 21.6 48 to 120/ Lighting CPU Fixture Hanger Covers — Non-Flexible Type — Form 20 Furnished with screws. Lighting: Flexible Fixture Hangers — Explosionproof EFHU Fixture Hanger Covers — Flexible Cushion Type — Form 20 Furnished with screws. 3/4” to 1/2” reducer supplied for 1/2” fixture stem. 3/4 12 to 48/ 5.4 to 21.6 3/4 EFH75-48 EFH75-48CN — EFH75-120 EFH75-120CN — 48 to 120/ 21.8 to 54.0 CPU and EFHU Connection Block Accessory Mounts directly to drilled and tapped pads in CPU and EFHU hangers. Phenolic, with fastening strap and mounting screws. 5-Wire. 20-Amp, 300 V Max. CB205 CB205CN CB205ACN 2.88"/ 73.2 mm CB205 CB205CN V Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1425 CPU and EFHU Fixture Hangers Dimensions Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. CPU50 and CPU75 Rigid Fixture Hanger 10-32 Thd. .34"/ 8.6 mm 5.56"/ 141.2 mm .25"/ 6.4 mm .75"/19.1 mm 2.00"/ 50.8 mm 0.28"/ 7.1 mm Dia. 2 Holes .25"/6.4 mm - 14 Thd. 2.88"/ 73.2 mm 3.69"/ 93.7 mm 6.38"/ 162.1mm 3.81"/ 96.8 mm 4.63"/ 117.6 mm 7.38"/187.5 mm Lighting EFHU Flexible Cushion Fixture Hanger .75"/19.1 mm .25"/6.4 mm 5.56"/ 141.2 mm 0.28"/ 7.1 mm Dia. 2 Holes .25"/6.4mm-20 Thd. 2.00"/ 50.8 mm Lighting: Flexible Fixture Hangers — Explosionproof 2.19"/55.6 mm 6.38"/ 162.1mm 7.75"/ 196.9 mm 7.38"/187.5 mm .88"/ 22.4 mm 1426 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Flexible Fixture Hangers, EXJF Couplings, ESD and ESS Swivels Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. For Use with Rigid Fixture Hangers Where Fixture Stem is More Than 12”/304.8 mm Long. Class I, Division 1 and 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • Fixture hangers and accessories for suspension of industrial type HID, incandescent, and fluorescent lighting fixtures in Class I, Class II, and Class III classified locations. • Suitable for use in areas where moisture, dust and corrosive atmospheres are present. EXJF Features • EYJF Hanger Coupling — Meets NEC Sec. 501 requirement for flexible suspension where fixture stem is more than 12”/304.8 mm long. — Watertight construction. — Convenient method for attaching explosionproof lighting fixtures to non-flexible hangers. — Allows free swing of lighting fixture in any direction. Absorbs shock, prevents damage to conduit and connections. — Assures plumb hanging of fixture. — Both end fittings are female with removable male close nipples. To make union end-coupling, remove nipple from either end and thread in a 1/2” or 3/4” UNY Union. — Female end fittings have setscrews with screwdriver slot to allow locking of conduit. Prevents turning of fixture stem and nipple. • ESS and ESD swivels for use with rigid fixture hangers where fixture stem is more than 12”/304.8 mm long. Standard Materials ESD ESS Illustrated Features Lighting • EXJF flexible hanger couplings: outer bronze braid, inner brass core with insulating liner and brass end fittings. • ESD and ESS swivels: malleable iron. Standard Finishes • EXJF flexible couplings: natural finish. • ESD and ESS swivels: triple-coat – 1) zinc electroplate, (2) chromate, and (3) epoxy powder coat. Lighting: Flexible Fixture Hangers — Explosionproof Options • EXJF available in stainless steel, add -SS to catalog number. Certifications and Compliances • • • • UL Listed: E10444 UL Standard: 886 CSA Certified: 065182 Suitable for Class I, Division 1 and 2, if installed in compliance with NEC 501-9(a)(b) and for Class II, Division 1 and 2, if in compliance with NEC 502-11(a)(b) Related Products • For unions, see Fittings Section. Shaded area on the following page indicates items suitable for Class I, Groups A and B in addition to Class I, Groups C and D; Class II, Groups E, F and G; and Class III. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1427 Flexible Fixture Hangers, EXJF Couplings, ESD and ESS Swivels Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. For Use with Rigid Fixture Hangers Where Fixture Stem is More Than 12”/304.8 mm Long. Class I, Division 1 and 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Size (Inches) Inches/Millimeters Flexible Length Catalog Number Overall Length EXJF Flexible Fixture Hanger ➊ Lighting Raintight construction. Supplied with two female hubs, each with a removable close nipple. Can be used to make male to male, female to male or female to female. Setscrew with screwdriver slot allows locking of conduit—prevents fixture stem from turning. 1/2 4.00/101.6 11.06/ 28.1 EXJF14 3/4 4.00/101.6 11.06/ 28.1 EXJF24 1/2 4.00/101.6 11.06/ 28.1 EXJF16 3/4 4.00/101.6 11.06/ 28.1 EXJF26 1/2 4.00/101.6 11.06/ 28.1 EXJF18 3/4 4.00/101.6 11.06/ 28.1 EXJF28 1/2 4.00/101.6 11.06/ 28.1 EXJF110 3/4 4.00/101.6 11.06/ 28.1 EXJF210 1/2 4.00/101.6 11.06/ 28.1 EXJF112 3/4 4.00/101.6 11.06/ 28.1 EXJF212 1/2 4.00/101.6 11.06/ 28.1 EXJF115 3/4 4.00/101.6 11.06/ 28.1 EXJF215 1/2 4.00/101.6 11.06/ 28.1 EXJF118 3/4 4.00/101.6 11.06/ 28.1 EXJF218 Swivel Hangers — Setscrew with screwdriver slot allows locking of conduit — Prevents fixture stem from turning ESD Swivel Lighting: Flexible Fixture Hangers — Explosionproof 15° swivel from center and full 360° free swing. 1/2 ESD50 ➋ 3/4 ESD75 ➋ ESS Swivel 15° swivel from center. 1/2 ESS50 ➋ 3/4 ESS75 ➋ ➊ Available in stainless steel. Add suffix -SS to catalog number. Consult your local sales representative. ➋ Not CSA Certified. Shaded area indicates items suitable for Class I, Groups A and B in addition to Class I, Groups C and D; Class II, Groups E, F and G; and Class III. 1428 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Flexible Fixture Hangers, EXJF Couplings, ESD and ESS Swivel Dimensions Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. For Use with Rigid Fixture Hangers Where Fixture Stem is More Than 12”/304.8 mm Long. ESS Swivel ESD Swivel 3.00"/ 76.2 mm 3.00"/ 76.2 mm 3.94"/ 100.1 mm 3.31"/ 84.1 mm 1.88"/ 47.8 mm 2.31"/ 58.7 mm 3.00"/ 76.2 mm EXJF Lighting A Dimensions in Inches/Millimeters B C 1/2 3.38/85.9 1.88/47.8 1.44/ 36.6 3/4 3.38/85.9 1.88/47.8 1.75/44.5 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: Flexible Fixture Hangers — Explosionproof Size Inches 1429 EFHC and EFHCA Fixture Hangers and Accessories Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups A*, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • Fixture hangers and accessories for suspension of industrial type HID, incandescent, and fluorescent lighting fixtures in Class I, Class II, and Class III classified locations. • Suitable for use in areas where moisture, dust and corrosive atmospheres are present. • EFHC and EFHCA hangers have smooth, rounded integral bushing in each hub to protect conductor insulation. Features • EFHC and EFHCA Fixture Hangers are used where fixture stem is less than 12”/304.8 mm long or with EXJF, ESD, or ESS where fixture stem is more than 12”/304.8 mm long. • Raintight when used with O-Ring. • Provided with threaded removable cover for convenience in pulling or splicing conductors. • Mounting strap available for fastening EFHC or EFHCA to a mounting surface. • CB202 connection block available for convenience in connecting line and fixture wires without splices. • Hanger has setscrew in stem hub to prevent fixture stem from turning. EFHC EFHCA Illustrated Features Lighting Standard Materials • EFHC and EFHCA fixture hanger body: malleable iron • EFHC and EFHCA fixture cover: copperfree (4/10 of 1% max.) aluminum • EFHC and EFHCA mounting strap and LC locking coupling: steel Standard Finishes Lighting: Flexible Fixture Hangers — Explosionproof • EFHC and EFHCA fixture hanger body: triple-coat – 1) zinc electroplate, (2) chromate, and (3) epoxy powder coat • EFHC and EFHCA fixture hanger cover: epoxy powder coat • EFHC/EFHCA mounting strap and LC locking coupling: zinc electroplate Certifications and Compliances • • • • UL Listed: E10444 UL Standard: 886 CSA Certified: 025875 Suitable for Class I, Division 1 and 2, if installed in compliance with NEC 501-9(a)(b) and for Class II, Division 1 and 2, if in compliance with NEC 502-11(a)(b) Shaded area on following page indicates items suitable for Class I, Groups B, C and D; Class II, Groups E, F and G; and Class III. Sealing fitting must be installed adjacent to enclosure for all conduits for Group B location (EFHC Series). * Suitable for Class I, Groups A, B, C, D. 1430 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 EFHC and EFHCA Fixture Hangers and Accessories Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups A*, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Conduit Size (Inches) Fixture Stem Size (Inches) Catalog Number EFHC Fixture Hanger Class I, Groups B, C and D Class II, Groups E, F and G Class III 3/4 1/2 EFHC755 3/4 3/4 EFHC7575 1 1/2 EFHC1050 1 3/4 EFHC1075 EFHCA Fixture Hanger Class I, Groups A*, B, C and D Class II, Groups E, F and G Class III 3/4 1/2 EFHCA7550 * 3/4 3/4 EFHCA7575 * 1 1/2 EFHCA1050 * 1 3/4 EFHCA1075 * EFHC and EFHCA Connection Block Accessory – Porcelain Lighting Designed to fit in hanger without fastening. 2 Wire, 20 Amp 277 Volt Maximum Wire Size Two No. 10 AWG large terminal Two No. 14 AWG small terminal CB202 EFHC and EFHCA Steel Mounting Strap For fastening EFHC or EFHCA to a mounting surface. Add suffix S Dimensions EFHCA and EFHC Fixture Hangers 0.13"/ 3.3 mm 5.69"/ 144.5 mm FHS Rigid Support 4.31"/ 109.5 mm 0.94"/ 23.9 mm 4.56"/ 115.8 mm 3.25"/ 82.6 mm 1.13"/ 28.7 mm 5.31"/ 134.9 mm EFHC: 2.81"/ 71.4 mm 2.25"/ 57.2 mm .34"/ 8.6 mm Dia. 2 Holes 0.25"/ 6.4 mm 1.75"/ 44.5 mm 3.31"/ 84.1 mm EFHC: 3.13"/ 79.5 mm 3.75"/ 95.3 mm 0.34"/ 8.6 mm Dia. 0.69"/ 17.5 mm * Suitable for Class I, Groups A, B, C and D. Shaded area indicates items suitable for Class I, Groups B, C and D; Class II, Groups E, F and G; and Class III. Sealing fitting must be installed adjacent to enclosure for all conduits for Group B location (EFHC Series). Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1431 Lighting: Flexible Fixture Hangers — Explosionproof Add suffix S to above EFHCA or EFHC catalog numbers. GRF Conduit Outlet Boxes and Fixture Hanger Covers and Canopies Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • Fixture hangers and accessories for suspension of industrial type HID, incandescent, and fluorescent lighting fixtures in Class I, Class II, and Class III classified locations. • Suitable for use in areas where moisture, dust and corrosive atmospheres are present. • GRF conduit outlet boxes have smooth, rounded integral bushing in each hub to protect conductor insulation. Features • GRF conduit outlet box with fixture hanger canopy or cover is used where fixture stem is less than 12”/304.8 mm long or with EXJF, ESD, or ESS where fixture stem is more than 12” long. • Raintight when used with O-Ring. • For use with hub cover or canopy. canopy has threaded cover opening for convenience in splicing conductors. • Cover and canopy hubs have set-screws with screwdriver slots to allow locking of conduit. Prevents fixture stem form turning. GRFC GRF Canopy Illustrated Features Standard Materials • Malleable iron or copperfree (4/10 of 1% max.) aluminum Standard Finishes • Bodies: triple-coat – 1) zinc electroplate; (2) chromate, and (3) epoxy powder coat • Covers and canopies: zinc electroplate and clear chromate Lighting: Flexible Fixture Hangers — Explosionproof Lighting Certifications and Compliances • UL Standard: 886 • Suitable for Class I, Division 1 and 2, if installed in compliance with NEC 501-9(a)(b) and for Class II, Division 1 and 2, if in compliance with NEC 502-11(a)(b) Dimensions in Inches/Millimeters GRF Conduit Outlet Box GRF Canopy 2.31"/ 58.7 mm .38"/ 9.7 mm 5.38"/ 136.7 mm 3.38"/ 85.9 mm .81"/ 20.6 mm 4.75"/ 120.7 mm 3.81"/ 96.8 mm 3.38"/ 85.9 mm 3.88"/ 98.6 mm 3.00"/ 76.2 mm 1.50"/ 38.1 mm 2.13"/ 54.1 mm 3.81"/ 96.8 mm .38"/ 9.7 mm 1432 .56"/ 14.2 mm 1.19"/ 30.2 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 GRF Conduit Outlet Boxes and Fixture Hanger Covers and Canopies Explosionproof, Dust-Ignitionproof UNILETS® for use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEC Catalog Number Conduit Size (Inches) Fixture Stem Size (Inches) Malleable Iron CSA Catalog Number Aluminum V Malleable Iron GRF Flanged Conduit Outlet Boxes — Form 1, Less Cover — For use with GRF fixture hanger canopies and covers below — Nominal diameter of cover opening is 3-3/8” — Furnished with threaded hubs and ground screw — Flange has four 3/8” mounting slots GRFC-50LC — GRFC-50LCCN 3/4 GRFC-75LC — GRFC-75LCCN 1 GRFC-100LC — GRFC-100LCCN 1/2 GRFL-50LC — GRFL-50LCCN 3/4 GRFL-75LC — GRFL-75LCCN 1 GRFL-100LC — GRFL-100LCCN 1/2 GRFT-50LC — GRFT-50LCCN 3/4 GRFT-75LC — GRFT-75LCCN 1 GRFT-100LC — GRFT-100LCCN 1/2 GRFX-50LC — GRFX-50LCCN 3/4 GRFX-75LC GRFX-50ALCCN GRFX-75LCCN 1 GRFX-100LC GRFX-75ALCCN GRFX-100LCN Lighting 1/2 GRF Fixture Covers – Form 1 — Furnished with external threads for attachment to GRF mounting box above Threaded Hub Cover GRK-50 — GRK-50CN 3/4 GRK-75 — GRK-75CN 3/4 GRK-75U — GRK-75UCN Union Hub Cover GRF Fixture Canopies – Form 1 — Furnished with external threads for attachment to GRF mounting box above — Threaded cover opening on side for convenience in splicing Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1/2 GRK-50C — GRK-50CCN 3/4 GRK-75C — GRK-75CCN 1 GRK-100C — GRK-100CCN 1433 Lighting: Flexible Fixture Hangers — Explosionproof 1/2 Fixture Hanger Bracket and Accessories UNILETS® for use with Threaded Metal Conduit. NPT Size (Inches) Support Weight (lbs/kg) Catalog Number Fixture Hanger Brackets Suitable for use with fixtures with 3/4-14 NPT conduit openings or hubs. Mounts directly to ceiling or wall separately from conduit system. Catalog number includes two brackets and two hexhead bolts. Iron with gray epoxy finish. 3/4 200/90.0 Ceiling Mount Projects light downward (90°). Shown mounted to Appleton AH260-118 explosionproof fluorescent lighting fixture. FHS1 Wall Mount Projects light at 45° angle. Shown mounted to Appleton AH260-118 explosionproof fluorescent lighting fixture. Safety Support Hooks and Rigid Support for Dummy Side of Lighting Fixtures Complete assembly includes two hooks and one rigid support. Each hook supplied with a screw for closing 3/8” jaw opening. Rigid Support straddles max. 1-1/4” conduit. (Chain shown in installation view not furnished.) Lighting: Flexible Fixture Hangers — Explosionproof Lighting 3/4 200/90.0 AC-KT LC Steel Locking Couplings Setscrews with Allen head fasten on outside of hub and fixture stem. Prevents fixture stem from turning in hubs not normally supplied with setscrews. 3/4” fixture stem. 3/4 — SLC75 1 — SLC1075 200/90.0 EFHM-50 Safety Support Hooks for Dummy Side of Lighting Fixtures Supplied with screw for closing 3/8” jaw opening. Male 1/2 EFHM-75 3/4 Female 1/2 200/90.0 EFHF-50 EFHF-75 3/4 Rigid Support for Fluorescent Lighting Fixtures (Dummy Side) Will straddle max. 1-1/4” conduit. 1/2 and 3/4 1434 350/157.5 FHS5075 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Fixture Hanger Bracket and Accessories UNILETS® for use with Threaded Metal Conduit. Dimensions of FHS1 Fixture Hanger Bracket 2.50"/ 63.5 mm 3/4 - 14 Tapered Pipe Thread 2.50"/63.5 mm 0.19"/4.8 mm R18 1.25"/ 31.8 mm 1.25"/31.8 mm 1.13"/28.7 mm Dia. Hole 1.69"/42.9 mm 6.38"/162.1 mm 1.50"/ 3.81 mm .67"/ 17.0 mm 1.00"/ 25.4 mm 0.5"/12.7 mm R .67"/ 17.0 mm 1.25"/31.8 mm 2.50"/ 63.5 mm .31"/7.9 mm Lighting Lighting: Flexible Fixture Hangers — Explosionproof Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1435 HID Temporary Lighting Designed and Packaged for Quick Installation Applications • More and more contractors are using temporary HID fixtures to light their work sites. Instead of modifying Low-Bay fixtures for this application, McGill’s HID Temporary Lighting allows them to buy something faster and easier. Lighting Lighting: McGill Temporary Features • 400 W Pulse Start Metal Halide lamp provides over 6 foot/1.8 meters candles of illumination at a 20 ft./6.1 meter mounting height. • McGill offers lighting layouts to conform with OSHA requirements for light output. • Type “O” lamp and mogul socket complies with NEC 2008 Article 410.13(F)(5) and ANSI C78.387. • Quick-attach durable 10”/254 mm welded wire guard mounts directly to the body to protect lamp and lampholder from accidental impact. • Fixture is factory wired at 120 Volt, but can be rewired internally for other voltage settings. • 3'/0.9 m cord with 5-15P molded plug on end. • Compact size for easy handling. • Low-profile fixture design keeps it up and out of the way of activity below. • High light output and long lamp life. • Open-air ballast for cooler operation. • Hook with locking feature. • (2) 3/4”/19.1 mm knock-outs for conduit access. • Single durable package design makes it easier for distributors to stock and more organized for contractors on the job site. • Quick and easy to assemble. • Optional bottom trap available. Shown with optional bottom trap Illustrated Feature Spring-lock hook allows contractors to mount the unit in seconds, without the need for tools. Standard Materials • Enclosure: Heavy-duty steel with powder coated finish • Lamp: 400 Watt Pulse Start Metal Halide: O-Type, BT37 Clear, EX39 (Exclusionary Mogul Base) • Multi-Tap ballast: 120, 208, 240, 277 Volt: Factory wired at 120 Volt • Power cord: 3 FT/0.9 M, 18/3 SJTW, 120 Volt, 15 Amp cord complete with NEMA 5-15 molded plug • Lamp guard: 11 ga. white painted steel • Mounting hook: 11 ga. steel Dimensions in Inches/Millimeters 4.26"/108.2 mm 3.52"/ 89.4 mm Certifications and Compliances 0.12"/ 3.0 mm 2.21"/ 0.7 mm 8.0"/2.4 mm 3 ft/0.9 m • UL and cUL Listed: E196293 • UL Standard: UL 1598 • Suitable for damp locations Options • Optional bottom trap available Catalog Number TL40PMTO Bottom Guard Trap TLTRAPW Replacement Lamp Guard TLGUARDW Replacement Lamp: 400 W PSMH, O-Type, BT37 Clear, EX39 GMP400BUPS 1436 11.76"/3.6 mm 400 W Fixture with Guard 9.25"/2.8 mm Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 String-O-Lights Low Cost Temporary Lighting OPEN CONDUCTOR Applications • McGill offers a variety of temporary job site lighting systems, from reusable, low cost cable versions to an assortment of open conductor styles. Features Flat Wire Cable Style Standard Materials FLATWIRE Illustrated Features Easy-Open Cages • Cages: yellow plastic • MOLDED CABLE Certification and Compliance Molded Cable Version — UL Listed: E88103 — UL Standard: 1088 — Meets OSHA requirements — CSA Certified: LL89639 V — CSA Standard: C22.2 No. 12 Lighting: McGill Temporary • They are available in 50’ to 200’/15.2 to 61 meters lengths of 2and 3-conductor and 12 and 14 gauge wire with 5 to 10 cage/ socket assemblies. • Brass sockets are enclosed in weather-resistant molded PVC, and plastic connectors provide greater reliability. • Packaging provides tangle-free, on-the-job handling and installation. • Easy-open cages snap open and closed for faster installation without tools and easy lamp replacements. • Non-corrosive cages are fastened to sockets by a non-corrosive collar and accommodate up to 200 Watt bulbs. • Cable styles meet 2008 NEC requirements. • Convenient, economical temporary lighting. • 110’/30.5 m messenger wire available to support string where needed. • Fully assembled; ready for installation. • Weather-resistant sockets. • All parts sold separately. Packaging No. of Socket Cages/ Spacing Sockets Ft/M Catalog Numbers for A-23 Bulb for PS-30 Bulb Molded Cable Styles — UL Listed 12/2-SJTW cable with plug/boot on one end and connector/cap on other end 100/30.5 10 10/3.0 2252-0018 — 12/2-SJTW cable 100/30.5 10 10/3.0 2252-0019 — 12/2-STW extra hard usage cable with weather protected plug/boot 100/30.5 10 10/3.0 2252-5007 V — 12/3-SJTW cable with 5-15 plug/boot on one end and connector/cap on other end 100/30.5 10 10/3.0 2252-0026 — 12/3-SJTW cable 100/30.5 10 10/3.0 2252-0027 — 14/2-SJTW cable 100/30.5 10 10/3.0 2252-0007 2252-0009 14/2-SJTW cable with plug/protective rubber boot on one end 100/30.5 10 10/3.0 2252-0012 2252-0013 14/2-SJTW cable 50/15.2 5 10/3.0 2252-0031 * 14/3-SJTW cable 100/30.5 10 10/3.0 2252-0014 2252-0015 14/3-SJTW cable with 5-15 plug/boot on one end and connector/cap on other end 100/30.5 10 10/3.0 2252-0024 2252-0025 14/3-SJTW cable 50/15.2 5 10/3.0 2252-0034 * — — * Contact Technical Service for UL data V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1437 Lighting Length Ft/M String-O-Lights Low Cost Temporary Lighting Length Ft/M No. of Cages/ Sockets Socket Spacing Ft/M Catalog Number for A-23 Bulb for PS-30 Bulb 100/30.5 10 10/3.0 2252-0035 — Flat Wire Styles 14/2 Flat wire cable 14/2 Flat wire cable 50/15.2 5 10/3.0 2252-0038 — 14/2 Flat wire cable 200/61.0 10 20/6.1 2252-0043 — 14/2 Flat wire cable with 1-15P plug on one end 100/30.5 10 10/3.0 2252-0040 — 14/2 Flat wire cable with 1-15P plug on one end 50/15.2 5 10/3.0 2252-0041 — 14/2 Flat wire cable with 1-15P plug on one end 200/61.0 10 20/6.1 2252-0044 — 2-conductor, 14 gauge wire 100/30.5 10 10/3.0 2252-4040 2252-4060 2-conductor, 14 gauge wire, right-hand screw shells 100/30.5 10 10/3.0 2252-1010 2252-2020 2-conductor, 14 gauge wire, left-hand screw shells 100/30.5 10 10/3.0 2253-1010 2253-2020 Flat Wire Styles with Plug Lighting: McGill Temporary Open Conductor Styles 2-conductor, 14 gauge wire 50/15.2 5 10/3.0 2252-0006 — 2-conductor, 14 gauge wire 200/61.0 10 20/6.1 2252-0008 2252-2008 Accessories and Replacement Parts Catalog Number 2252-1025 Hangers (for open conductor styles) Cages Catalog Number for A-23 Bulb for PS-30 Bulb Single plastic replacement cage only MCG2250 — Single plastic replacement cage with screw collar 2250-S 2255 Single plastic replacement cage with right-hand socket assembly and hanger 2252 2256 Single plastic replacement cage with left-hand socket assembly and hanger 2253 — Single plastic replacement cage with hanger (no socket) 2254 — 2259 — Lighting For use with McGill String-O-Lights For use with most types of Lampholders Single plastic cage only Socket/Wire Sets Catalog Number Weather-resistant 600 Watt/250 Volt, 4-1/2”/114.3 mm leads of 14 gauge wire, vulcanized, pigtail socket; right-hand thread 4017 Weather-resistant 600 Watt/250 Volt, 4-1/2”/114.3 mm leads of 14 gauge wire, vulcanized, pigtail socket; left-hand thread 4018 Messenger wire: 110’/30.5 meters 3/32”/2.3 mm dia. 7 x 7 stranded galvanized aircraft cable 2251 1438 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 7000 Series Industrial Extension Lights Rubber Handle without Receptacle Features • 7000 Series extension lights resist damage and deterioration. • Open-end or NO-ROL closed-end cages of extra-heavy, electrically welded, wire accommodate up to 200 Watt bulbs. • Ideal for use where safety codes prohibit outlets in handles. • Easy relamping cage. • Internal strain relief withstands 30 lb/9.1 kg. pull test. • All-weather cords with molded plugs. • Long-life Levolier™ switch mechanism in handle with protective thumb guard. Standard Materials • Cage: 10 gauge steel wire • Cord: thermoplastic • Handle: yellow, grease-resistant, high quality rubber 7000-SG 7001-SRG ➋ 7025-SRG 7000-RIG Options • 15 Amp, 120 Volt CSA Certified versions available. Items available in a CSA version will be marked with a V. Add the prefix C to the beginning of the catalog number. Certifications and Compliances ➊ UL Listed (with cord): E59071 UL Listed (without cord): E59054 UL Standard: 153 Meets OSHA requirements CSA Certified (with cord): LL89639 V CSA Certified (without cord): LL56247 V CSA Standard: C22.2 No. 12 Lighting: McGill Temporary • • • • • • • Lighting 7999-RGH ➊ 100 Watt Maximum for UL Listing and CSA Certification. ➋ Not UL Listed or CSA Certified. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1439 7000 Series Industrial Extension Lights Rubber Handle without Receptacle with out Cord Catalog Numbers with 1'/ 0.3m with 25’/7.6m 16/3-SJTW Cord 16/3-SJTW Cord with 50’/15.2m 16/3-SJTW Cord Closed-End Extension Lights Handle and cage 7000-G — 7025-G 7050-G Handle and cage with reflector 7000-RG — 7025-RG 7050-RG Handle and cage with switch 7000-SG — 7025-SG 7050-SG Handle and cage with switch and reflector 7000-SRG 7025-SRG 7050-SRG — 7012-SRG ➊ — 7025-SRG-GFCI Insulated cage, reflector (100 Watt max.) 7000-RIG — 7025-RIG 7050-RIG Non-metallic cage, reflector (100 Watt max.) 7999-RGH — 7925-RGH 7950-RGH 6229-1 ➋ 6229-2 ➋ Handle and cage with switch and reflector and GFCI — Replacement Cord Sets Lighting: McGill Temporary Cord set with molded plugs Catalog Number ➋ for 60-100 Watt for 200 Watt Open-End Extension Lights (without cord) 7001-G Handle and cage 7002-G Handle and cage with reflector 7001-RG 7002-RG Handle and cage with switch 7001-SG 7002-SG Handle and cage with switch and reflector 7001-SRG 7002-SRG Accessories and Replacement Parts Catalog Number With Out Reflector With Reflector Lighting Cages Closed-end cage for 7000 8171 8170 Open-end cage (100 Watt lamp max.) 8133 8162 Open-end cage (200 Watt lamp max.) 8335-2 8336 Closed-end vinyl insulated cage (100 Watt A-21) 08171 08170 Open-end vinyl insulated cage (100 Watt lamp max.) — 08162 Open-end vinyl insulated cage (200 Watt lamp max.) — 08336 Non-metallic cage for 7999 — 8224 Catalog Number Catalog Number With Out Switch With Switch Handles and Sockets Handle for 7000, 7001, 7002 — 6403 6404-1 Handle and socket for 7000, 7001, 7002 — 8959 8950 Socket for 7000, 7001, 7002 — 4015 4005 9232 — Grounding clamp — ➊ UL Listed for cord reel usage only. ➋ Not UL Listed. 1440 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 7000 Series Industrial Extension Lights V CSA Certification Only. Rubber Handle without Receptacle with out Cord Catalog Numbers with 1'/0.3 m with 25’/7.6 m 16/3-SJTW Cord 16/3-SJTW Cord with 50’/15.2 m 16/3-SJTW Cord Closed-End Extension Lights Handle and cage C7000-G — C7025-G C7050-G Handle and cage with reflector C7000-RG — C7025-RG C7050-RG Handle and cage with switch C7000-SG — C7025-SG C7050-SG Handle and cage with switch and reflector C7000-SRG C7012-SRG ➊ C7025-SRG C7050-SRG Insulated cage, reflector (100 Watt max.) C7000-RIG — C7025-RIG C7050-RIG Non-metallic cage, reflector (100 Watt max.) C7999-RGH — C7925-RGH C7950-RGH C6229-1 ➋ C6229-2 ➋ Replacement Cord Sets Cord set with molded plugs Catalog Number ➋ for 60-100 Watt for 200 Watt Handle and cage C7001-G C7002-G Handle and cage with reflector C7001-RG C7002-RG Handle and cage with switch C7001-SG C7002-SG Handle and cage with switch and reflector C7001-SRG C7002-SRG Accessories and Replacement Parts Catalog Number With Out Reflector With Reflector Lighting: McGill Temporary Open-End Extension Lights (without cord) Cages 8171 Closed-end cage for 7000 8170 8133 8162 8335-2 8336 Closed-end vinyl insulated cage (100 Watt A-21) 08171 08170 Open-end vinyl insulated cage (100 Watt lamp max.) — 08162 Open-end vinyl insulated cage (200 Watt lamp max.) — 08336 Non-metallic cage for 7999 — 8224 Lighting Open-end cage (100 Watt lamp max.) Open-end cage (200 Watt lamp max.) Catalog Number With Out Switch With Switch Handles and Sockets Handle for 7000, 7001, 7002 — 6403 6404-1 Handle and socket for 7000, 7001, 7002 — 8959 8950 — 4015 4005 9232 — Socket for 7000, 7001, 7002 Grounding clamp — ➊ CSA Listed for cord reel usage only. ➋ Not CSA Listed. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1441 7000-38 Series Industrial Extension Lights For PAR-38 Lamps Applications • These extension lights are ideal for temporary flood lighting, railroad car inspections, spot light inspecting of the internal conditions of large well pipes, and other applications requiring intense lighting. Features • 7000 Series extension lights resist damage and deterioration. • Open-end of extra-heavy, electrically welded, wire accommodates up to 200 Watt bulbs. • Ideal for use where safety codes prohibit outlets in handles. • Easy relamping cage. • Internal strain relief withstands 30 lb/9.1 kg. pull test. • All-weather cords with molded plugs. • Long-life Levolier™ switch mechanism in handle with protective thumb guard. Standard Materials Lighting: McGill Temporary • Cage: 10 gauge steel wire • Cord: thermoplastic • Handle: yellow, grease-resistant, high quality rubber 7000-SG-38 Certifications and Compliances • CSA Certified (with cord): LL89639 • CSA Certified (without cord): LL56247 • CSA Standard: C22.2 No. 12 with out Cord Handle and cage 7000-G-38 Catalog Number with 25'/7.6m 16/3-SJTW Cord with 50'/15.2m 16/3-SJTW Cord 7025-G-38 7050-G-38 Handle and cage C7000-G-38 V C7025-G-38 V C7050-G-38 V Handle and cage with switch 7000-SG-38 7025-SG-38 7050-SG-38 Handle and cage with switch C7000-SG-38 V C7025-SG-38 V C7050-SG-38 V Lighting Accessories and Replacement Parts With Out Reflector Catalog Number With Reflector with Trap 1455-38 — 1455-38-T Cages Cage for 7000-38 Catalog Number With Out Switch With Switch Handles and Sockets Handle for 7000, 7001, 7002 Grounding clamp 6403 8959 6404-1 8950 25’/7.6m 16/3-SJTW 50’/15.2m 16/3-SJTW 6229-1 6229-2 Cord Sets Cord set with molded plugs V CSA Certification only. 1442 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 6000 Series Commercial-Duty Extension Lights Polypropylene Handle with Receptacle Features • Commercial-duty extension lights resist impact, abrasion and oil. • Three wire grounded handles with convenience receptacle. • Easy-open, NO-ROL cage with rotating hook saves time and permits precise lamp positioning. • Plated metal parts resist rust and corrosion. • All-weather cords have molded plugs. • 10 Amp, 125 Vac receptacle rating. • Cage accommodates 100 Watt max. bulbs. • Push-through switch. • Accommodates 16/3 cord type only. Standard Materials 6025-SRG • Cord: 16/3-SJTW yellow thermoplastic • Cage: 10 gauge steel Standard Finish • Cage: zinc-plated Certifications and Compliances ➊ UL Listed: E59071 UL Standard: 153 Meets OSHA requirements CSA Certified: LL89639 Meets OSHA requirements Catalog Numbers with 1'/0.3m 16/3-SJTW Cord with 25’/7.6 m 16/3-SJTW Cord with 50’/15.2 m 16/3-SJTW Cord Handle and cage with switch and reflector 6012-SRG ➋ 6025-SRG 6050-SRG Handle and cage with switch and reflector C6012-SRG ➌ V C6025-SRG V C6050-SRG V Handle and cage with switch and reflector and GFCI — 6025-SRG-GFCI Lighting: McGill Temporary • • • • • — Lighting ➊ 100 Watt Maximum for UL Listing and CSA Certification. ➋ UL Listed for cord reel usage only. ➌ CSA Listed for cord reel usage only. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1443 5000 Series Industrial Extension Lights Thermoplastic Handle With or Without Receptacle Features • Industrial-duty extension lights resist impact, abrasion and oil. • Yellow handles with receptacle, yellow cords, and grounded cages enhance safety, while easy-open cages speed relamping. • All-weather cords have molded plugs for durability. • Cages feature rotating hooks and NO-ROL design for accurate light positioning. • Accommodates up to 200 Watt rough service bulbs. • Meets NEC requirements for power tool grounding. • 13 Amp, 125 Vac receptacle rating. • Long-life Levolier™ switch mechanism in handle with protective thumb guard. 5000-SRG 5000-SRG, easy open cage Standard Materials • Cords: 16/3-SJTW thermoplastic • Cages: 10 gauge steel Standard Finish • Cages: zinc plated, chrome finish • 15 Amp, 120 Volt CSA Certified versions available. Items available in a CSA version will be marked with a V. Add the prefix C to the beginning of the catalog number. 5025-SRG Certifications and Compliances ➊ • • • • • • • UL Listed (with cord): E59071 UL Listed (without cord): E59054 UL Standard: 153 Meets OSHA requirements CSA Certified (with cord): LL89639 V CSA Certified (without cord): LL56247 V CSA Standard: C22.2 No. 12 Lighting Lighting: McGill Temporary Options ➊ 100 Watt Maximum for UL Listing and CSA Certification. V CSA Certification only. 1444 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 5000 Series Industrial Extension Lights Thermoplastic Handle With or Without Receptacle with out Cord Closed-End Extension Lights Handle and cage Handle and cage Handle and cage with reflector Handle and cage with reflector Handle and cage with switch Handle and cage with switch 5000-G C5000-G V 5000-RG C5000-RG V 5000-SG Catalog Numbers with 1'/ 0.3m with 25’/7.6m 16/3-SJTW Cord 16/3-SJTW Cord — — — — — — Handle and cage with switch and reflector C5000-SG V 5000-SRG 5012-SRG ➊ Handle and cage with switch and reflector C5000-SRG V 5012-SRG ➊ Handle and cage with switch and reflector and GFCI Handle and cage, no receptacle Handle and cage, no receptacle Handle and cage with reflector, no receptacle Handle and cage with reflector, no receptacle Handle and cage with switch, no receptacle 5000-GN C5000-GN V 5000-RGN C5000-RGN V 5000-SGN Handle and cage with switch and reflector, no receptacle C5000-SGN V 5000-SRGN Handle and cage with switch and reflector, no receptacle C5000-SRGN V Handle and non-metallic cage Handle and non-metallic cage Handle and non-metallic cage with reflector Handle and non-metallic cage with reflector Handle and non-metallic cage with switch Handle and non-metallic cage with switch Handle and non-metallic cage with switch and reflector 5050-G C5025-G V 5025-RG C5050-G V 5050-RG C5025-RG V 5025-SG C5050-RG V 5050-SG C5025-SG V 5025-SRG C5050-SG V 5050-SRG C5025-SRG V 5025-SRG-GFCI 5025-GN C5050-SRG V C5025-GN V 5025-RGN C5050-GN V 5050-RGN C5025-RGN V 5025-SGN C5050-RGN V 5050-SGN C5025-SGN V 5025-SRGN C5050-SGN V 5050-SRGN C5025-SRGN V 5999-GH C5050-SRGN V C5999-GH V 5999-RGH C5999-RGH V 5999-SGH C5999-SGH V 5999-SRGH C5999-SRGH V 6229-1 — 5050-GN — — — — — — — — 6229-2 Catalog Number With Out Reflector With Reflector Cages Wire cage Vinyl insulated metal cage (100 Watt A-21) Non-metallic cage (100 Watt A-19) 8171 08171 — 8170 08170 8224 Catalog Number With Out Switch With Switch Handles and Sockets Handle and socket for 5000 Handle and socket for 5000-N Socket for 5000 and 5000-N 0877 0877-N 00868 0865 0865-N 868 ➊ 100 Watt Maximum for UL Listing and CSA Certification. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1445 Lighting Handle and non-metallic cage with switch and reflector Replacement Cord Sets Cord set with molded plugs — — — — — — — — — — — — — — — — — — — — — — — — — 5025-G Lighting: McGill Temporary Handle and cage with switch, no receptacle — with 50’/15.2m 16/3-SJTW Cord Industrial Extension Lights Features • RE-HL5SRG and RE-HL7G – All-weather cords with molded plugs – Long-life Levolier™ switch mechanism in handle with protective thumb guard • RE-HLG-P and RE-VHL100N – Easy to handle and service – Capable of long, continuous operation in some of industry’s most demanding environments RE-HL55RG Standard Materials • • RE-HL5SRG and RE-HL7G – Cage: 10 gauge steel wire – Handle: yellow, grease-resistant, high quality rubber RE-HLG-P and RE-VHL100N – Handle and cage: nonmetallic composition RE-HLG-P Certifications and Compliances Lighting: McGill Temporary • UL Listed: E65418 • UL Standard:153 Description Max. Lamp Watts Weight Ea. Oz./Grams Catalog Number 100 W 15/425 RE-HL5SRG 100 W 20/567 RE-HL7G 75 W 8/227 RE-HLG-P * 100 W 19/539 RE-VHL100N * Grounded handlamp with switch and receptacle With yellow malamine phenolic handle and deluxe wire metal guard. Use with maximum 16/3 SO or SJOOW cord. Grounded handlamp without switch or receptacle Lighting With yellow rubber handle and vinyl coated wire metal guard. Meets OSHA requirements and NEC 511.4(B) (2) for commercial garages, repair and storage Grounded handlamp without switch or receptacle With yellow polypropylene handle and guard. Meets OSHA requirements and NEC 511.4(B)(2) for commercial garages, repair and storage Grounded NEMA 4X handlamp without switch or receptacle Enclosed and gasketed handlamp with yellow polyester handle and teflon globe. For indoor use only. Meets OSHA requirements and NEC 511.4(B)(2) for commercial garages, repair, and storage. * NOT UL Listed. 1446 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 13 Watt Handy Compact Fluorescent Work Light Applications • The compact light provides cool operation, allowing for work in small areas without excessive heat build-up or burns from accidental contact. Features • This energy-efficient work light features an exclusive 10,000 hour, 13 Watt rough service twin tube fluorescent lamp. • Optional magnetic base with removable plastic swivel hook available. • 13 Watt, 120 Volt PLC, 0.59"/15 mm lamp. • Double insulated, enclosed electrical components. • Convenient on/off switch under domed cap. • Durable construction for industrial and commercial applications. Standard Materials 5331-0001 • Cord and molded plug: 18 gauge SJTOW oil-resistant • Outer tube with reflector break-resistant polycarbonate Certifications and Compliances • UL Listed: E59071 • UL Standard: 153 Lighting: McGill Temporary 5331-0008 (Magnetic base and removable swivel hook assembly) Catalog Number 120V, 13 Watt lamp, 2”/50.8 mm dia., 11-1/2”/292.1 mm length with 25’/7.6 m, 18/2-SJTOW yellow cord, in-line ballast, and built-in switch 5331-0001 Replacement 13 Watt lamp for 5331-0001 (shock resistant, rough service) 5331-0002 Magnetic base and removable swivel hook assembly 5331-0008 Scratch Guard 5331-0035 Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1447 13 Watt Rough Service Fluorescent Lamp Applications • The compact light provides cool operation, protecting personnel from accidental contact burns. Features • This 13 Watt energy-efficient work lamp provides light output equivalent to a 75-100 Watt incandescent with lamp life rated at 10,000 hours. • Optional tool tap and scratch guard are available. • Reflector directs light to work surface away from eyes. • Scratch guard protects light. • On/off switch, located under handle is water and dust resistant. • Compact ballast located in handle. • Rubber bumpers and handle protect light on impact. • Exclusive in-line tool tap (110 Volt) with outlet cover. 5331-0034 Standard Materials • Cord and molded plug: 16 or 18 gauge SJTOW oil-resistant • Adjustable hooks with cushion tips: spring steel Certifications and Compliances Lighting: McGill Temporary • UL Listed: E59071 • UL Standard: 153 5331-0008 (Magnetic base and removable swivel hook assembly) Catalog Number Fluorescent Lamp 13 Watt Handi-Light with tool tap and scratch guard, 25’/7.6 m 16/3-SJTOW 5331-0031 13 Watt Handi-Light with scratch guard and 25’/7.6 m 18/2-SJTOW 5331-0032 13 Watt Handi-Light with Saf-T-Tie insert: cord locking mechanism, tool tap, scratch guard and 18”/457.2 mm 16/3-SJTOW 5331-0034 Lighting Accessories and Replacement Parts 13 Watt Handi-Light head kit with switch, ballast and scratch guard 5331-0033 Scratch guard only 5331-0035 13 Watt Handi-Light head kit with switch and scratch guard; less ballast 5331-0036 13 Watt lamp only (shock resistant, rough service) 5331-0002 Magnetic base and removable swivel hook assembly 5331-0008 1448 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Fluorescent Work Lights 12 Volt, 13 Watt Applications • For applications requiring low-voltage, bright, energy-efficient lighting. Features • The light is powered by a printed circuit, solid state ballast connected to the lamp base. • Hook with protective plastic tip, allowing for the light to hang on user’s belt or shoulder strap for hands-free operation. • Models available with 20’/6.1 m 18/2-SJTOW oil-resistant, low temperature cord or 1’/0.3 m to 5’/1.5 m neoprene black coil cord; both with male lighter plugs on the ends. • Ideal for use in confined areas. • Replaceable 13 Watt, 12 Volt, 12.5 Amp Vac twin tube lamp. • Ballast designed to operate at -4 °F/-20 ˚C. • Ballast protected against voltage surges up to 18 Volts. • Convenient on/off switch. • Optional battery pack with charger available. • Optional magnetic base with removable plastic swivel hook available. 5331-0003 5331-0004 Standard Materials Lighting: McGill Temporary • Single metal hook with protective plastic tip • Break-resistant polycarbonate outer tube with reflector 5331-0008 (Magnetic base and removable swivel hook assembly) Lighting Catalog Number Work Lights 12 Volt, 13 Watt lamp, 2”/50.8 mm dia., 11-1/2”/292.1 mm length with 20’/6.1 m 18/2-SJTOW yellow cord and male lighter plug 5331-0003 12 Volt, 13 Watt lamp, 2”/50.8 mm dia., 11-1/2”/292.1 mm length with 1’/0.3m-5’/1.5 m coil cord and male lighter plug 5331-0004 Accessories and Replacement Parts 13 Watt lamp only (shock resistant, rough service) 5331-0002 Magnetic base and removable swivel hook assembly 5331-0008 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1449 Battery Pack with Charger Applications • Ideal for use with 12 Volt, 13 Watt fluorescent work lights when working in remote areas. Charger plugs into 120 Vac and charges at 1.2 amps, 12 Vdc. Charger is furnished with 6’/1.8 m cord and male lighter plug to insert into the female outlet of the battery. Charger then plugs directly into a 120 Volt outlet. If battery is discharged to recommended maximum depth, the charger requires 16 hours to fully recharge. As battery is charged, the output of the charger reduces to low level. Battery must be removed from the charger within three days. Fully charged battery will operate a work light for about 5 hours continuously Features Lighting Lighting: McGill Temporary • • • • 7 Amp hour capacity, sealed lead acid type battery. Taper charger. Safety vent opens if battery is overheated. Battery furnished with 1’/0.3 m power cord having female 12 Volt outlet. • Battery pack: 5.75 lbs/2.6 kgs 6”/152.4 mm height 2-1/2”/63.5 mm width 3-1/2”/88.9 mm length 5331-0005 Standard Material • Battery case: rugged nylon with double zipper, closed cell foam padding on the sides and bottom • 2”/50.8 mm adjustable web belt with quick release buckle • Two “D” rings to connect the hooks of the shoulder strap • Shoulder strap is 60”/1524.0 mm long with 1'/0.3 m long foam pad, adjustable strap on each end. • Triangular “D” ring provides a place to hang your light to give hands-free lighting. Catalog Number Battery Pack Battery pack, charger, shoulder strap, and case with belt 5331-0005 Accessories and Replacement Parts 13 Watt, 12 Volt, 1.25 Amp DC lamp (shock resistant, rough service) 5331-0006 7 Amp hour battery assembly 5331-0007 1450 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Fluorescent Industrial Extension Lights Applications • Compact, lightweight with hinged hooks, these fluorescent extension lights were designed to carry and use virtually anywhere. Features • • • • • • • Ideal for use in confined areas. Emanates soft, glare-free light. Safe and durable, these lamps remain cool to the touch. Outer tube protects 15, 8, or 4 Watt lamps. Durable, heavy-duty construction throughout. Low energy, long-life. No exposed metal parts. Standard Materials • Impact resistant plastic 5330-1525 5330-0818 Certifications and Compliances UL Listed: E59071 UL Standard: 153 Meets OSHA requirements CSA Certified: LL89639 V CSA Standard: C22.2 No. 12 V 15 Watt Extension Lights Catalog Number with 25’/7.6m Cord with 50’/15.2m Cord 15 Watt lamp 2 -1/8”/54.1 mm dia., 22-1/2”/571.5 mm length, with SJTO yellow cord — 18/3 from 3 prong plug to ballast, 18/2 to lamp. No. F15T8/CW bulb and FS-2 starter furnished 5330-1525 15 Watt lamp 2 -1/8”/54.1 mm dia., 22-1/2”/571.5 mm length, with SJTW yellow cord — 16/3 from 3 prong plug to ballast, 18/2 to lamp. No. F15T8/CW bulb and FS-2 starter furnished 5332-1525 V — with 15'/4.6m 18/2-SJTO Cord with 22'/6.7m 18/2-SJTO Cord 4 Watt, F4T5/CW; 11”/279.4 mm overall length 5330-0411 5330-0418 8 Watt, F8T5/CW; 17”/431.8 mm overall length 5330-0811 5330-0818 8 Watt, F8T5/CW; 17”/431.8 mm overall length 5332-0825 V 5332-0818 V 5330-1550 Lighting: McGill Temporary • • • • • 4 and 8 Watt Extension Lights Catalog Number Plastic shield for 5330-0411 and 5330-0418 5330-0400 Hook only for 5330-0411, -0418, -0811, and -0818 5330-0401 Plastic shield for 5330-0811 and 5330-0818 5330-0800 Plastic shield for 5330-1525 5330-1500 Hooks, plastic, set of two (2) for 5330-1525 5330-1501 V CSA Certification only.. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1451 Lighting Accessories and Replacement Parts High Intensity Low-Voltage Extension Lights Features • Compact, durable, and safe 30 Watt spot and 35 Watt flood lights. • Ideal for use where low-voltage and maximum illumination are needed. • Powerpak transformer converts 120 Vac to 12 Vac, also available as separate item. • Spot and flood light available with battery clips where no voltage conversion is necessary. • Available with battery clips where no voltage conversion is necessary. • Heavy-duty cords, plugs, and connectors. • TWIST-LOK connector permits economical cord and lamp replacement. 5329-4000 Standard Materials Lighting: McGill Temporary • Bulb and powerpak transformer • Secondary cord: 50’/15.2 m 16/2-SJTO • Handle: impact-resistant plastic • Lens: polycarbonate Catalog Number with Power Pack Transformer with Battery Clips Complete unit with 30 W, 50,000 candle power spot bulb; 50’/15.2 m 16/2-SJTO cord and plug 5329-4000 ➊ 5329-4001 ➊ Complete unit with 35 W, 325 candle power flood bulb; 50’/15.2 m 16/2-SJTO cord and plug 5329-4010 ➋ 5329-4011 ➋ Lighting Accessories and Replacement Parts Catalog Number Mini-Powerpak with 5’ 16/3-SOW primary cord 5329-0015 30 Watt spot light with 50’ 16/2-SJTO cord and TWIST-LOK connector 5329-4002 ➊ 35 Watt flood light with 50’ 16/2-SJTO cord and TWIST-LOK connector 5329-4012 ➋ Plastic lens 5329-4003 Lens retaining ring 5329-4004 ➊ Accommodates G.E. bulb #4405 and 4405-1. ➋ Accommodates G.E. bulb #4422. 1452 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Mini-Powerpak Low-Voltage Extension Lights Features • Lightweight, compact transformer converts 120 Vac to 12 Vac lighting. • Under 6 lbs./2.7 kgs total weight. • Transformer potted and sealed to resist moisture. • Fuse protected primary fuse. • TWIST-LOK connector. • 75 W low-voltage bulb included. Standard Material • Extension light • Transformer: 3” x 3-1/2” x 7”/76.2 x 88.9 x 177.8 mm • Power cord: 5’/1.5 m 16/3-SOW Certification and Compliance 5329-7010 • Meets OSHA requirements 7000-G extension light with 25’/7.6 m 16/3-SJTW Cord 5329-7000 7000-RG extension light with 25’/7.6 m 16/3-SJTW Cord 5329-7010 Lighting: McGill Temporary Catalog Number Extension Lights Complete unit with power supply cord, Mini-Powerpak transformer Accessories and Replacement Parts Mini-Powerpak with 5’/1.5 m 16/3-SOW primary cord 5329-0015 25’/7.6 m 16/3-SJTW secondary cord assy., with TWIST-LOK plug 5329-0003 75 Watt low-voltage medium base A-21 bulb 6461 Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1453 Fluorescent Hand Lamps Explosionproof. 13 Watt Twin Tube and 26 Watt Quad Class I, Division 1, Groups C, D Class II, Division 1, Groups F, G Features • This portable, fluorescent light features durable, heavy-duty construction with non-metallic guard, swivel hook and handle assembly. • The handle holds a 125 Volt rated ballast designed to operate on 50 or 60 Hz with recyclable thermal protection. • “T” Number: T6. • Easy maintenance. • Completely watertight. • No exposed metal parts. • 900 lumens for 13 Watt unit. • 1800 lumens for 26 Watt unit. • Corrosion-resistant. • 4”/101.6 mm outside diameter. • 23-1/2”/596.9 mm length. • 3-1/2 lbs/1.6 kgs. Standard Materials • Globe: tempered glass Lighting: McGill Temporary Certifications and Compliances 5227-0006 • UL Listed: E43473 • UL Standard: 844 Catalog Number 13 Watt Twin Tube Selection Chart Hand lamp with 50’/15.2 m 16/3-SO cord (male plug not included) 5227-0003 Twin tube hand lamp with out cord 5227-0006 26 Watt Quad Tube Selection Chart 5227-0007 Quad tube hand lamp with out cord 5227-0008 Lighting Hand lamp with 50’/15.2m 16/3-SO cord (male plug not included) 1454 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Tubular Fluorescent Inspection Light Explosionproof. 8 Watt Class I, Division 1, Group D Class II, Group G Applications • This inspection light is ideal for inspection of aircraft fuel systems because of its narrow diameter, light weight and cool operating temperature. Features • Furnished with high impact aluminum alloy guard and nonsparking swivel hook. • “T” Number: T5. • Easy maintenance — only glass globe requires factory replacement. • 450 lumens. • 2.5”/63.5 mm outside diameter. • 27”/685.8 mm length. • 3 lbs., 3 oz./1.5 kgs. Certifications and Compliances 5227-0004 • UL Listed: E43473 • UL Standard: 844 5227-0004 Lighting: McGill Temporary Catalog Number Hand lamp with 50’/15.2 m 16/3-SO cord (male plug not included) Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1455 Industrial Extension Lights Explosionproof Class I, Division 1, Groups C, D Features • This watertight portable extension light features a lightweight aluminum alloy guard with a non-sparking swivel hook, as well as a chemical-resistant handle and globe holder. • High impact glass globe accepts an A-21. • The one-piece construction of the 15 Amp, 240 Vac socket withstands temperatures up to 360 ˚F/182 °C in service. • “T” Number: T3A. • Completely watertight. • Accommodates 16/3-SO or 14/3-SO cord. • 5”/127 mm outside diameter. • 18-1/2”/469.9 mm length. • 4 lbs/1.8 kgs. Standard Materials • 100 Watt rough service bulb 5227-0005 Certifications and Compliances Catalog Number Extension Lights Hand lamp with 50’/15.2 m 16/3-SO cord (male plug not included) 5227-0001 Hand lamp with out cord 5227-0005 Accessories and Replacement Parts Handle assembly and lamp holder 5227-9915 Guard and globe assembly 5227-9916 Lighting Lighting: McGill Temporary • UL Listed: E43473 • UL Standard: 844 1456 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Low-Voltage, High Intensity Hand Lamp Explosionproof Class I, Division 1, Groups C, D Applications • Ideal for inspecting refinery towers, manholes, or railroad tank cars. Features • This low-voltage spotlight uses a 12 Volt, PAR-36, 30 Watt, automotive type, sealed beam high intensity lamp. • The aluminum light guard is high impact alloy and swivel hook is non-sparking. • “T” Number: T3C. • 30,000 beam candlepower. • 1/4”/6.4 mm thick glass lens. • Can be powered by low-voltage transformer or alternate 12 Volt source. • 5-1/2”/139.7 mm outside diameter. • 16”/406.4 mm length including hook. • 3 lbs/1.4 kgs. 5227-0002 Standard Materials • Light guard: aluminum Certifications and Compliances Catalog Number Hand lamp with 50’/15.2 m 16/3-SO cord (male plug not included) 5227-0002 Lighting: McGill Temporary • UL Listed: E43473 • UL Standard: 844 Lighting Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1457 Incandescent Utility Lights Applications • Ideal for food processing plants, barns, garages, warehouses, and workshops. • Low cost, corrosion-resistant, enclosed utility lights, complete with base, wiring box, and globe, are convenient to use. Features • Fasten directly to walls, ceilings, or structural members — no separate outlet box required. • Glass or plastic globes screw out for easy replacement of A-21 bulbs (not included) up to 150 Watts. • High quality materials and sockets assure long, trouble-free service life. • 3-1/2”/88.9 mm diameter; 9-1/2”/241.3 mm height • Two 5/16”/7.9 mm diameter mounting holes on 4-3/8”/111.3 mm centers. • Moisture-resistant construction with no exposed metal parts. • Large compartment for easy wiring. • Super strong, impact-resistant, thermoplastic mounting unit. • For use up to 100 ˚F/38 °C ambient temperature. • Accommodates up to 150 Watts max. domestic A-21 bulbs. • For use with either 1/2”/12.7 mm or 3/4”/19.1 mm rigid non-metallic conduit. 606 with 1435-6 653 Certifications and Compliances UL Listed: E8646 UL Standard: 1598 CSA Certified: LL56247 V CSA Listed: C22.2 No. 250.0 V Lighting Lighting: McGill General • • • • V CSA Certification only. 1458 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Incandescent Utility Lights Catalog Numbers Wiring Compartment Cubic Inch/Cubic Decimeter Supply Wire Rating °F/°C For damp locations 15/0.25 257/125 600 601 For damp locations 15/0.25 221/105 C600 V C601 V For damp locations 12/0.20 140/60 603 604 For damp locations 12/0.20 140/60 C603 V C604 V Sealed unit for wet locations 12/0.20 140/60 605 606 Sealed unit for wet locations 12/0.20 140/60 C605 V C606 V For damp locations 15/0.25 257/125 640 641 For damp locations 15/0.25 221/105 C640 V C641 V For damp locations 12/0.20 140/60 643 644 For damp locations 12/0.20 140/60 C643 V C644 V For damp locations 15/0.25 257/125 650 651 For damp locations 15/0.25 221/105 C650 V C651 V For damp locations 12/0.20 140/60 653 654 For damp locations 12/0.20 140/60 C653 V C654 V 1/2"/12.7 mm Threaded Conduit Opening 3/4"/19.1 mm Threaded Conduit Opening Utility light with glass globe Utility light with clear plastic globe ➊ Utility light with red plastic globe ➊ Accessories and Replacement Parts — Additional plastic globes see Protect-O-Globes Lighting: McGill General Catalog Number 1435-6 Base and socket only for 600, 640, and 650 610 Base and socket only for 601, 641, and 651 611 Base and socket only for 603, 643 and 653 5213-0623 Base and socket only for 604, 644 and 654 5213-0672 Base, socket, and seal assembly only for 605 5213-0637 Base, socket, and seal assembly only for 606 5213-0638 Socket only for 15 cubic inch/ 0.25 cubic decimeter wiring compartment 600-3 Socket only for 12 cubic inch/0.20 cubic decimeter wiring compartment 606-3 Glass globe only for 600, 601, 603, and 604 - 6-11/16"/296.9 mm long 0753 Glass globe only for 605 and 606 - 6-11/16"/296.9 mm long 0753-HR ➋ Clear plastic globe only for 640, 641, 643 and 644 - 6-1/8"/6.1 mm long 649 Red plastic globe only for 650, 651, 653 and 654 - 6-1/8"/6.1 mm long 659 Green plastic globe only - 6-1/8"/6.1 mm long 669 Lighting Protective metal cage for glass globes only ➊ Plastic globes max. 75 Watt base-up mounting. ➋ Heat resistant globes required for wet locations. V CSA Certification only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1459 Fluorescent Utility Lights Applications • Whether the application calls for securely lighting a livestock operation, damp barn, or even a harsh, outdoor environment, the 22 Watt fluorescent utility light delivers energy-efficient, trouble-free service for a variety of demanding lighting needs. The single unit incorporates non-corrosive construction, its own wiring compartment, and an impact-resistant thermoplastic mounting base. Features Lighting Lighting: McGill General • Removable globe for effortless “push-pull” relamping and cleaning. • Standard 0.59"/15 mm, 22 Watt quad-tube lamp provides 75% greater energy efficiency. • Average service life of 10,000 hours. • Fastens directly to walls, ceilings, or structural members. • 3-1/2”/88.9 mm diameter, 9-1/2”/241.3 mm height. • Two 5/16”/7.9 mm diameter mounting holes on 4-3/8”/111.3 mm centers. • 22 Watt, 120 Volt PLC, 0.59"/15 mm lamp equivalent to 75 Watt incandescent. • Delivered complete with globe, ballast, lamp, socket and wiring box. • For use up to 100 ˚F/38 °C ambient temperature. • Use with either 1/2”/12.7 mm or 3/4”/19.1 mm rigid non-metallic conduit. 600-FL22 Options • CSA Certified versions available. Items available in a CSA version will be marked with a V. Add the prefix C to the beginning of the catalog number. Certifications and Compliances • • • • UL Listed: E13761 UL Standard: 1598 CSA Certified: LL56247 CSA Listed: C22.2 No. 250.0 Wiring Compartment Cubic Inch/Cubic Decimeter Supply Wire Rating °F/°C Utility light with glass globe For damp locations For damp locations Sealed unit for wet locations Sealed unit for wet locations Utility light with clear plastic prismatic globe For damp locations For damp locations 12/0.20 12/0.20 12/0.20 12/0.20 194/90 221/105 194/90 221/105 12/0.20 12/0.20 194/90 221/105 Sealed unit for wet locations ➊ 12/0.20 Sealed unit for wet locations ➊ Utility light with red plastic prismatic globe For damp locations For damp locations Sealed unit for wet locations ➊ Catalog Numbers 1/2"/12.7 mm 3/4"/19.1 mm Threaded Conduit Opening Threaded Conduit Opening 600-FL22 601-FL22 C600-FL22 V 605-FL22 C601-FL22 V 606-FL22 C605-FL22 V C606-FL22 V 640-FL22 641-FL22 194/90 C640-FL22 V 645-FL22 C641-FL22 V 646-FL22 12/0.20 221/105 C645-FL22 V C646-FL22 V 12/0.20 12/0.20 194/90 221/105 12/0.20 194/90 650-FL22 651-FL22 C650-FL22 V 655-FL22 C651-FL22 V 656-FL22 12/0.20 221/105 Sealed unit for wet locations ➊ C655-FL22 V Accessories and Replacement Parts — Additional plastic globes see Protect-O-Globes C656-FL22 V Glass globe only - 6-11/16”/220.7 mm long Clear plastic prismatic globe only - 8-1/4”/209.6 mm long Red plastic prismatic globe only - 8-1/4”/209.6 mm long Protective metal cage for glass globes only 22 Watt, 120 Volt PLC,0.59" /15 mm lamp Base, socket, and ballast assembly only for 600-FL22 Base, socket, ballast, and seal assembly only for 605-FL22 Catalog Number 0753 5213-6649 5213-6659 1435-6 5213-6660 5213-6623 5213-6625 ➊ For base-up operation only. V CSA Certification only.. 1460 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Protect-O-Sleeves For Fluorescent Tubes Applications • Reusable Protect-O-Sleeves encase existing fluorescent tubes to insulate and improve lighting efficiency at low temperatures. • High tensile, polycarbonate strength protects people, equipment, and products. • Available for applications requiring ultra-violet light filtering such as museums, department stores, and art galleries, where fluorescent lighting can deteriorate materials. 2260 (T-12) Features • Furnished with end caps that fit snugly between lamp and sleeve. • Filter Ray sleeves are designed to filter out UV rays in the range of 0-385 nanometers when used with 400 M.A. lamps. • Insulates lamps up to 2.5 times at 20 ˚F/-6 °C. • Accommodates lamps up to 800 milliamps ➊. • For use up to 100 ˚F/38 °C ambient temperature. • Most T-8 and T-12 versions available in colors. Certifications and Compliances 2270 (T-8) 2546 (T-5) • Meets OSHA safety requirements T-5 Clear Protect-O-Sleeves ➋ Lamp Type Nominal Lamp Length Inches/Millimeters Catalog Number for Sleeve with 2 Caps for T-5 Diameter Lamps Box Quantity F-14 22/558.8 2522 48 F-21 34/863.6 2534 24 F-28 46/1168.4 2546 24 T-8 and T-12 Clear Protect-O-Sleeves ➊ Nominal Lamp Length Inches/Millimeters Catalog Number for Sleeve with 2 Caps for T-12 Diameter Lamps Catalog Number for Sleeve with 2 Caps for T-8 Diameter Lamps Box Quantity F-15 18/457.2 — 2270 24 F-20 24/609.6 2268 2278 24 F-30 36/914.4 — 2271 24 F-32 48/1219.2 — 2295 24 F-36 36/914.4 2269 — 24 F-40 48/1219.2 2260 — 24 F-40 60/1524.0 — 2286 24 F-48 46/1168.4 2261 — 24 F-60 60/1524.0 2276 — 24 F-72 72/1828.8 2262 2272 24 F-96 96/2438.4 2263 2273 24 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1461 Lighting ➊ No. 2285 heat sink screens must be used with T-8 and T-12 800-milliamp maximum HO lamp bases. Two heat sink screens required per sleeve (one at each end between lamp and sleeve). HO lamps create excessive heat at the ends. The open metal mesh of the heat sink screens spreads the excess heat over a larger area to help eliminate deterioration of the sleeve. NOT for use with VHO lamps. ➋ NOT for use with HO or VHO lamps. Lighting: McGill Lamp Protection Lamp Type Protect-O-Sleeves For Fluorescent Tubes Clear UV Filtering Protect-O-Sleeves ➌ Lamp Type Nominal Lamp Length Inches/Millimeters Catalog Number for Sleeve with 2 Caps for T-12 Diameter Lamps for T-8 Diameter Lamps Box Quantity F-32 48/1219.2 — 2295-FR 24 F-40 48/1219.2 2260-FR — 24 F-96 96/2438.4 2263-FR 2273-FR 24 Colored Protect-O-Sleeves ➊ Catalog Numbers for Sleeve with 2 Caps Lamp Type Blue Green Pink Red Yellow Box Quantity F-32, T-8 2295-B 2295-G 2295-P 2295-R 2295-Y 12 F-40, T-12 2260-B 2260-G 2260-P 2260-R 2260-Y 12 F-48, T-12 2261-B 2261-G 2261-P 2261-R 2261-Y 12 F-72, T-12 2262-B 2262-G 2262-P 2262-R 2262-Y 12 F-96, T-8 2273-B 2273-G 2273-P 2273-R 2273-Y 12 F-96, T-12 2263-B 2263-G 2263-P 2263-R 2263-Y 12 Accessories and Replacement Parts Lighting Lighting: McGill Lamp Protection Catalog Number Universal end cap for T-5, 2500 series 2508 Universal end cap for T-12, 2260 series 2265 Heat sink screen for HO lamp bases 2285 ➊ Universal end cap for T-8, 2270 and 2295 series sleeves produced prior to 8-1-97 2274 Universal end cap for T-8, 2270 and 2295 series sleeves produced after 8-1-97 2279 Universal T-8 filter ray end cap for 2273-FR and 2295-FR 6840 Universal T-12 filter ray end cap for 2260-FR and 2263-FR 6846 ➊ No. 2285 heat sink screens must be used with T-8 and T-12 800-milliamp maximum HO lamp bases. Two heat sink screens required per sleeve (one at each end between lamp and sleeve). HO lamps create excessive heat at the ends. The open metal mesh of the heat sink screens spreads the excess heat over a larger area to help eliminate deterioration of the sleeve. NOT for use with VHO lamps. ➌ Sleeves filter out ultraviolet light in the range of 0 to 385 nanometers when used with 400 M.A. lamps. NOT for use with HO or VHO Lamps. 1462 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Protect-O-Tubes For Fluorescent Tubes Applications • Protect-O-Tubes offer convenient and environmentally safe lighting for food, drug, and related industries. Features • Complete fluorescent lighting unit • Adhesively attached end caps provide added safety for glass containment. • Air space between the lamp and sleeve acts as a cushion and helps to protect the tube from breakage and diffuses heat. • Improves light transmission and provides longer lamp life. • For use up to 100 ˚F/38 °C ambient temperature. • Available in T-8 or T-12 versions. Standard Finish • Lighting unit: polycarbonate sleeve, lamp, and end caps • End caps: polypropylene Certifications and Compliances • Approved for use by the USDA and satisfying the requirements of OSHA and FDA • Meets safety requirements Lamp Base Med. Bi-pin Nominal Lamp Length Inches/Millimeters 18/457.2 Catalog Number of Sleeve, Lamp, and End Caps 4230 Box Quantity 24 F-32/T-8/SP35 Med. Bi-pin 48/1219.2 4231 24 F-32/T-8/SPX35 Med. Bi-pin 48/1219.2 4232 24 F-32/T-8/SP41 Med. Bi-pin 48/ 1219.2 4233 24 F-32/T-8/SPX41 Med. Bi-pin 48/ 1219.2 4234 24 F-40/T-12/CW/RS/WM Med. Bi-pin 48/ 1219.2 4261 24 F-40/T-12/LW/RS/WM Med. Bi-pin 48/ 1219.2 4262 24 F-40/T-12/SPX35 Med. Bi-pin 48/ 1219.2 4265 24 F-40/T-12/D Med. Bi-pin 48/ 1219.2 4266 24 F-40/T-12/WW Med. Bi-pin 48/ 1219.2 4269 24 F-48/T-12/LW/WM Single-pin 48/ 1219.2 4263 24 F-48/T-12/CW/HO Recessed Double Contact 48/ 1219.2 4264 ➊ 24 F-72/T-12/SPX35 Single-pin 72/1828.8 MCG4250 12 Single-pin 96/2438.4 4281 12 Recessed Double Contact 96/ 2438.4 4283 ➊ 12 F-96/T-12/CW/WM Single-pin 96/ 2438.4 4284 12 F-96/T-12/D/WM Single-pin 96/ 2438.4 4285 12 F-96/T-12/WW Single-pin 96/ 2438.4 4286 12 Recessed Double Contact 96/ 2438.4 4287 ➊ 12 F-96/T-12/D F-96/T-12/CW/HO/WM F-96/T-12/LW/HO/WM Single-pin 96/ 2438.4 4288 12 F-96/T-12/SP65/HO Recessed Double Contact 96/ 2438.4 4289 ➊ 12 F-96/T-12/SP41/HO Recessed Double Contact 96/ 2438.4 4290 ➊ 12 F-96/T-12/LW/WM Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting Note: Availability of lamp types shown above may be affected by the implementation of the Energy Policy Act of 1992. ➊ Two heat sink screens are furnished with all HO lamp styles to help eliminate excessive heat at the ends of the lamps. Lighting: McGill Lamp Protection Lamp Type F-15/T-8/SPX35 1463 Tubeloc Holders Applications • Securely position and hold tubes in fluorescent fixtures Features • Shock resistant • Styles to fit most fluorescent lamps in use today Standard Finish • Holders: shock resistant nylon Certifications and Compliances • • • • UL Listed: E59240 UL Standard: 1598 CSA Certified: LL36636 CSA Standard: C22.2 M180 Description Catalog Number M175 T-12 Recessed double contact; Slimline single-pin; medium bi-pin; T-17 power groove with recessed double contact base (3/4”/19.1 mm dia. plunger) M176 T-17 Bi-pin mogul base M180 Lighting Lighting: McGill Lamp Protection T-8 and T-12 Bi-pin, 14-40 Watts 1464 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Protect-O-Globes For Incandescent Bulbs Applications • Protect lamps and the working environment with economical polycarbonate globes that are virtually unbreakable. • Ideal for the replacement of glass and wire guard combinations where incandescent or HID lamps are used in vandal-proof applications. Features • Various styles, sizes, and colors available. • Prismatic globes provide lateral light diffusion. • Smooth globes reduce operating temperatures, amplify light source. • Accommodates up to 150 Watts maximum, base-up operation. 1500-C 0604AP 3316 Certifications and Compliances • Meets OSHA requirements Description Color Thread Diameter In/mm Globe Dimensions Inches/Millimeters — W x L Maximum Wattage Catalog Number 3—1/4/82.6 3—1/4/82.6 4—1/4/108.0 3—1/4/82.6 3—1/4/82.6 3—1/4/82.6 3—1/4/82.6 3—1/4/82.6 3—3/16/81.0 3—1/4/82.6 3—1/4/82.6 3—1/4/82.6 3—1/4/82.6 3—3/16/81.0 3—1/4/82.6 3—1/4/82.6 3—1/4/82.6 3—1/2 x 8—1/4/88.9 x 209.6 3—1/2 x 8—1/4/88.9 x 209.6 4—3/4 x 8—5/16/120.7 x 211.1 3—3/4 x 6—1/4/95.3 x 158.8 3—3/4 x 6—1/4/95.3 x 158.8 3—3/4 x 6—1/4/95.3 x 158.8 3—3/4 x 6—1/4/95.3 x 158.8 3—1/2 x 6—1/4/95.3 x 158.8 3—23/32 x 6/94.5 x 152.4 3—1/2 x 6—1/4/88.9 x 158.8 3—1/2 x 6—1/4/88.9 x 158.8 3—1/2 x 6—1/4/88.9 x 158.8 3—1/2 x 6—1/4/88.9 x 158.8 3—23/32 x 6/94.5 x 152.4 3—1/2 x 6—1/4/88.9 x 158.8 3—1/2 x 6—1/4/88.9 x 158.8 3—1/2 x 6—1/4/88.9 x158.8 60 60 150 60 60 60 60 60 75 60 60 60 60 75 60 60 60 0134CP ➊ 0134CS ➊ 1500-C 0604GP ➊ 0604RP ➊ 0604AP ➊ 3—3/16/81.0 4—1/4”/108.0 3—7/16 x 1—5/8/87.4 x 41.4 3—7/16 x 1—5/8/87.4 x 41.4 75 150 3316 4014 Finish 0603CS ➊ 0603GS ➊ 0603RS ➊ 0603AS ➊ 0604CS ➊ 0752-C 0604GS ➊ 0604RS ➊ 0604AS ➊ 0604CP ➊ 0752-P Dimensions A - 3-1/2”/88.9 mm B - 7-1/2”/190.5 mm C - 3.0”/76.2 mm D - 3-1/4”/82.6 mm E - 3-3/4”/95.3 mm F - 1/2”/12.7 mm Cylinder Prismatic A - 3-1/2”/88.9 mm B - 5-1/2”/139.7 mm C - 3.0”/76.2 mm D - 3-1/4”/82.6 mm E - 3-3/4”/95.3 mm F - 1/2”/12.7 mm Cylinder Smooth A - 3-3/4”/95.3 mm B - 5-1/2”/139.7 mm C - 3.0”/76.2 mm D - 3-1/4”/82.6 mm E - 1/2”/12.7 mm Bullet Smooth Lighting ➊ Can be used with McGill Incandescent and Fluorescent Utility Lights. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Lighting: McGill Lamp Protection Globes 8—1/4”/209.6 mm cylinder Clear Prismatic 8—1/4”/209.6 mm cylinder Clear Smooth 8—5/16”/211.1 mm cylinder Clear Smooth 6—1/4”/158.8 mm bullet Clear Smooth 6—1/4”/158.8 mm bullet Green Smooth 6—1/4”/158.8 mm bullet Red Smooth 6—1/4”/158.8 mm bullet Amber Smooth 6—1/4”/158.8 mm cylinder Clear Smooth 6—1/4”/158.8 mm cylinder Clear Smooth 6—1/4”/158.8 mm cylinder Green Smooth 6—1/4”/158.8 mm cylinder Red Smooth 6—1/4”/158.8 mm cylinder Amber Smooth 6—1/4”/158.8 mm cylinder Clear Prismatic 6—1/4”/158.8 mm cylinder Clear Prismatic 6—1/4”/158.8 mm cylinder Green Prismatic 6—1/4”/158.8 mm cylinder Red Prismatic 6—1/4”/158.8 mm cylinder Amber Prismatic Bases Yellow plastic base for use with 0752-C/P globes Yellow plastic base for use with 1500-C globe 1465 Wire Lamp Guards and Wire Lamp Guard Grounding Kit Wire Lamp Guards Wire Lamp Guard Grounding Kit Applications Application • Wire lamp guards with universal collars help prevent breakage and theft. Features • A wide variety of types and sizes is available to fit your diverse needs. • Heavy-duty, 10 or 12 gauge, zinc-plated construction ensures long life. • Easy to install. • Vinyl coated versions available. • Rust-resistant zinc plating with chromate finish. • Clamp type guards for vapor-tight fixtures available. • Spot welded steel wire ensures long life. • To ensure that your lamps are grounded, and comply with NEC and OSHA requirements, the grounding kit supplies a metal fastener and 1'/0.3 m wire to connect wire lamp guards to a grounding circuit. Certifications and Compliances • Meets OSHA requirements • Meets NEC requirements Certifications and Compliances • Meets OSHA requirements Wire Lamp Guards Description 1.50/38.1 2100-2100-A 2200-2200-A Vinyl coated GRIPON guards with out reflectors 1.50/38.1 V-2100BULK V-2200BULK PROTECTOR “O” guards; open bottom heavy-duty 1.50/38.1 1433 1434 Vinyl coated PROTECTOR “O” guards 1.50/38.1 V-1433 V-1434 — 2932 2933 Closed bottom wall and receptacle lamp guards 3.50/88.9 1438 — Cage for utility light ➊ 3.50/88.9 1435-6 — 1.69/0.51 — 2.63/0.8 1438-1 — 3.75/1.14 (1435-1) 1435-1 Guards for PAR and R-38 lamps Guards for vapor-tight fixtures 1435-3 ➋ Wire Lamp Guard Grounding Kit Description Catalog Number 9995 Grounding Kit Lighting Catalog Number for 100 W Bulb for 200 W Bulb GRIPON guards with out reflectors Trap only to close bottom of 1433 and 1434 Lighting: McGill Lamp Protection Collar Diameter Inches/Millimeters ➊ See McGill Incandescent and Fluorescent Utility Lights.Plastic cages available, see McGill String-O-Lights. ➋ 300 Watt type PS25 lamp only. 1466 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Fluorescent Lamp Changers Grips Lamp Lighting Lighting: McGill Lamp Changers Applications • Eliminate the need for climbing ladders and scaffolds. Features • Changers securely grip lamps for easy removal. • Two models to choose from. • Models for spring-loaded, bi-pin, single-pin, or recessed double contact lamps. 174 184 Catalog Number Lamp Changers Complete changer unit for up to 1—1/2”/38.1 mm diameter, 4’/1.2 m lamps that require 90˚ rotation or axial movement. Includes changer head, four zinc-plated steel pole sections each 24”/609.6 mm long, and starter changer. For T-8, T-10, T-12 single-pin, T-8, T-12 med. bi-pin, and T-10, T-12 recessed double contact lamps. 174 Complete changer unit for 1—1/2"/38.1 mm diameter, spring-loaded lamps up to 8'/2.4 m long. Includes changer head and two-section aluminum telescoping pole extending to 12—1/2’/3.8 m. 184 Accessories and Replacement Parts 170-P Zinc-plated 2'/0.6 m steel pole section for 174 Zinc-plated steel changer head only for 174 171-C Aluminum starter changer only for 174 173-S Fluorescent changer pull cord only for 174 01540 Yellow driver, five clips, and speed nuts for 184 5274-1743 Changing Lamps is Easy With McGill Fluorescent Lamp Changers 1. First, angle changer to wedge yellow driver between lamp and socket. Then snap changer onto tube by rocking changer gently. 2. Next, standing at end of changer, push pole so driver will extract fluorescent lamp out of socket. Model #184 Snap on Tube Wedge In Wedge driver between lamp and socket. Snap changer onto tube. Rock changer onto lamp. Push against Spring and extract Push against changer spring and extract. Lamp Identification The changers featured on this page accommodate the fluorescent lamps at right. Single-pin: T-8, T-10, T-12 Medium bi-pin: T-8, T-12 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Recessed double contact: T-10, T-12 1467 Incandescent Lamp Changers Lighting: McGill Lamp Changers Lighting Rubber Covered Fingers with Garter Springs Features • Rubber covered fingers with garter springs make changing a variety of lamp types simple. • Hard-to-reach lamps are easily replaced without using ladders or platforms. • A variety of styles and sizes is available to fit practically all commonly used lamps. • Models for use with incandescent, mercury, metal halide, and sodium lamps. • Garter spring grips lamps firmly. • Lightweight for ease-of-use and convenience. • Insulated to help protect against shock. • Changes lamps up to 25’/7.6 m height (poles sold separately). 151-CA 153-C 161-C Lamp Size ➊ Wattage Catalog Number Changer head with angle adjustment ➋ A-15, -17, -19; G-16-1/2,-18-1/2 15-100 150-CA Changer head with angle adjustment ➋ A-19, -21, -23; P-25; PS-25, -30, -35; FLE-20/T-19 ➌; SL-18 ➌; G-25, -30 25-500 (18 fluorescent ➌) 151-CA Changer head only PS-35, -40; G-40, -48 25-500 152-C Changer head only PS-52; G-48, -64 750-1500 (incandescent) 153-C Changer head only T-16, -18, -20 1000-1500 (incandescent) 400-1000 (mercury) 154-C Changer head only R-52, -57 500-1000 (incandescent flood) 400-750 (mercury) 155-C Changer head only R-30, -40; PAR-30, -36, -38; ER-30, -40 50-500 (incandescent) 100-175 (mercury) 156-C Changer head only E-37; BT-37, -46; ED-37 400-700 (mercury) 400-1000 (metal halide) 158-C Changer head only R-60 750 (incandescent) 400 (mercury flood) 159-C Changer head only E-21, -23, -23-1/2, -25, -28; ED-23-1/2, -28; BT-28 75-250 (mercury) 175-400 (metal halide) 50-1000 (sodium) 161-C Changer head only E-17, -18; ED-17, -18; B-17 50 (mercury) 35-400 (sodium) 70-175 (metal halide) 163-C Lamp Identification A lamp designation consists of a letter indicating the shape and a figure to identify the approximate diameter in eighths of an inch. Lamps are measured through their greatest diameter. G-25 lamps are globe shaped with a 3-1/8”/79.5 mm diameter. SL18 P G A T PS E/ED BT PAR R ER ➊ Lamp size, not Wattage, determines proper changer. May not accommodate weight of greater Wattage lamps. ➋ Jointed angle adapter for easy removal of horizontally or angle mounted lamps included. Use with small headed units only. ➌ Not for use with angle adapter. 1468 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Incandescent Lamp Changers Rubber Suction Cups Lighting Lighting: McGill Lamp Changers Features • Rubber suction cups make it easy to change lamps where space surrounding bulbs is limited. • Made of durable synthetic rubber, these changers securely fasten onto lamps and allow for safely changing lamps up to 25’/7.6 m heights (poles sold separately). • For lamps with smooth face only. 157-C 162-C 166-C Lamp Size * Wattage Catalog Number Changer with rubber suction cups R-40, -52, RB-52 75-1000 (incandescent spot/flood) 100-400 (mercury) 157-C Changer with rubber suction cup PAR-30, -36, -38 25-150 (incandescent) 75-100 (mercury) 162-C Changer with rubber suction cup R-20, -30, ER-30, PAR-20 30-75 (incandescent) 166-C * Bulb size, not Wattage, determines changer to be used. Use on smooth surface lamps only. Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1469 Lighting: McGill Lamp Changers Lighting Lamp Changer Accessories and Replacement Parts Application • Lightweight accessories and replacement parts provide a safe and sure way to remove and replace bulbs. Features • For use with incandescent lamp changers, these 5’/1.5 m insulated, interchangeable pole sections are designed for quick assembly to desired length. Up to four poles can be securely locked together with spring-loaded buttons. • Broken lamp base remover has plastic shield designed to catch fragments and help protect user. Fits 160-P lamp changer pole, providing a fully insulated, safe, and sure way to remove bases of broken lamps. 200 9260 160-P Catalog Number Interchangeable, wood insulated steel pole, 5’/1.5 m sections 160-P Broken lamp base remover for standard and mogul lamp bases 200 Garter springs for 150-CA, 151-CA, 154-C, 161-C changer heads 7013 Garter springs for 152-C, 153-C, 156-C, 158-C changer heads 7014 Garter springs for 155-C and 159-C changer heads 7019 Spring clip and button for lamp changer poles 9260 1470 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 Notes Lighting Lighting: Notes Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010 1471 Lighting: Notes Lighting Notes 1472 Visit our website at www.appletonelec.com or contact us at (800) 621-1506. © September 2010
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Create Date : 2010:09:03 12:28:36-05:00 Creator : Adobe InDesign CS4 (6.0) Modify Date : 2010:09:07 08:36:29-05:00 Trapped : False XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2010:09:07 08:36:29-05:00 Creator Tool : Adobe InDesign CS4 (6.0) Format : application/pdf Document ID : uuid:ee944a2f-6c96-4784-a8aa-a8401138a35b Instance ID : uuid:01d7ee61-f656-43d5-a9d1-8209dc4af869 Producer : Adobe PDF Library 9.0 Page Layout : SinglePage Page Mode : UseOutlines Page Count : 562EXIF Metadata provided by EXIF.tools