Rittal Systems For The Human/Machine Interface 102656 Catalog

2014-11-11

: Pdf 102656-Catalog 102656-Catalog 639889 Batch12 unilog

Open the PDF directly: View PDF .
Page Count: 282 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Scroll down to view the document on your mobile browser.

Perfect systems
- at the human / machine interface
Our achievements are your advantages
- The Rittal value-added package
Four systems at a glance
- You have the requirements – we have the solution
Rittal Command Panel . . .
- . . . Meeting your requirements!
- . . . Suggestions from industry, for industry
- . . . the yardstick of individuality
VIP 6000
- Diversity: Frame and front design
- Diversity: Enclosures, rear panels, heat dissipation
- Diversity: Keyboard housings and ergonomics
- Diversity: Configuration examples
- Selection: Operating housing / keyboard housing
- Selection: Operating housing
- Selection: Keyboard housing
- Technical details
- Technical details
- Technical details
- Technical details
- . . . Interaction between monitoring and operation
Optipanel
- Diversity: Enclosure, front design, rear panels
- Diversity: Keyboard housing and ergonomics
- Selection: Operating housing / keyboard housing
- Selection: Operating housing
- Selection: Operating housing / keyboard housing
- Standard dimensions for front panel 482.6 mm (199) x 7 U / 270 x 234 mm (10.639 x 9.219)
- Technical details
- Technical details
Compact Panel
Premium Panel
- Stainless steel
- Stainless steel, technical details
Rittal operating housings . . .
- . . . “Standard solutions”
Command Panel housing with door
- with handle grips
  - Profile strip
Command Panel
- with handle grips
- with display panel front
- with wide VIP 6000 frame
Command Panel housing with door
- Stainless steel
Command Panel
- Stainless steel
- . . . and the panel is in position!
Support arm systems
- Combinations of enclosures / support arm systems
Support arm systems CP-S . . .
- . . . small but powerful!
- Steel, fast selection
- Stainless steel, fast selection
- Steel
- Stainless steel
Support arm system CP-L . . .
- . . . compact elegance!
- Fast selection
- Support arm, height adjustable
  - Support arm, height adjustable, CP-L
- Aluminum
- Aluminum
Support arm system CP-XL . . .
- . . . for high loads
- Fast selection
- Aluminum
Rittal pedestal systems . . .
- . . . stationary or mobile
- Pedestal, height-adjustable
- Assembly sequence for pedestal, height-adjustable
- Panel lift
  - Panel lift
- Worktop attachment, IW
  - Worktop attachment, IW
- Pedestals
- Pedestals
- Pillars
Rittal Industrial Workstations . . .
- . . . Versatility through modularity
- Individual solution examples
- Fast selection
- Enclosures with door versions
- Enclosures with drawers
- Worktops
  - Roof
  - Worktops
- Pedestal with worktop
- Monitor housings, operating housings
- Technical details
- Technical details
Rittal PC enclosure systems . . .
- . . . compact and practical
- Based on TS 8 with keyboard drawer
- Based on TS 8, with folding keyboard or desk section
- Based on ES with keyboard drawer
- Based on ES with fold-out keyboard tray or desk section
- Stainless steel
Rittal console systems . . .
- . . . multi-variable
Console systems AP
- Combination options for the modules
- Technical details
  - Pedestals
- Technical details
  - Pedestals
  - Consoles
One-piece consoles AP
- Sheet steel
Universal console AP
- Sheet steel
One-piece consoles AP
- Stainless steel
Universal consoles AP
- Stainless steel
Rittal system accessories . . .
- . . . for even more solutions
Climate control
- VIP small air conditioner, useful cooling output 225 W/920 BTU
Climate control
- Rear cooling panel
  - Rear cooling panel, modular
Rittal climate control systems . . .
- . . . for process protection
Accessories
- Base/plinth
  - Base/plinth components
  - Base/plinth trim
  - Base/plinth trim
  - Base/plinth trim PC
  - Base/plinth, stationary
  - Base/plinth, complete
  - Base/plinth, complete
  - Base/plinth trim panel, modular
  - Assembly bolts for base/plinth
  - Transport castors
  - Cross member
  - Base/plinth, mobile
  - Base/plinth adaptor
  - Twin castors
  - Reinforcement bracket
- Base
  - Levelling feet
  - Base/plinth adaptor for levelling feet
  - Levelling feet
  - Levelling feet, 100mm (3.949) high
  - Foot rest
  - Trim panel
  - Base mount
  - Base assembly plate
  - Cable entry plates
  - Cable entry grommets
  - Connector grommets
  - Foam rubber cable clamp strip
  - Metal gland panel
  - Plastic cable gland panels
  - Enclosure reinforcement
  - Connection plate
- Cable management
  - Connector gland
  - Cable ties for quick assembly
  - Cable tie fastener
  - Cable clamping bracket
  - Cable entry module CP-L, round
  - Cover plate
  - Adaptor plate
  - Cable gland IW
  - Cable clamp rails (right angle section)
  - Cable clamps
  - Cable conduit and holder
- IW monitor housing
  - Support plate
  - Spacer plate
  - Turntable
  - Rotational stop
  - Feet
- Wall/enclosure connectors
  - Enclosure connectors
  - Frame connector
  - Enclosure duct connector
  - Wall mounting bracket
  - Cross-brace for door
  - Cable tube, flexible
  - Enclosure surface connector
  - Connector for compact enclosures
  - Utility shelf CP
  - Wall mounting bracket
  - Pole clamp
  - Wall bracket
  - Aluminum strip for AP
- front design
  - Keyboard drawer
  - Desk section
- Front design
  - Aluminum front panels
  - Front panels
  - Front panels, hinged
  - Mounting kit
  - Sealing bar
  - Cross member
  - Spacer panel and built-in trim panel
  - Handle set
  - Conduit holder
  - Handle set VIP 6000 for wide frame
  - Handle set for Optipanel
  - Corner handle
  - U handle
  - Clipboard
  - Ring board
  - Handle frame for operating housing
- Handles
- Interface door
  - Interface door
  - Interface box
- Window
  - Viewing window
  - Hinge 180°
- Lock systems
  - Comfort handle for semi-cylinder
  - Comfort handle
  - Handle adaptor for designer door TS-PC/IW
  - Lock and push-button inserts
  - Ergoform standard
  - Ergoform special
  - Plastic handles
  - T handles
  - Lock inserts
  - Cylinder inserts
  - Semi-cylinder lock
  - Lock cover
  - Multiple lock
  - Lock cover
  - Enclosure keys
  - Universal enclosure key
  - Door stop for VIP6000, hinged
- Stay
  - Door stop
  - Lifting roller for TS/PC
  - Wiring plan pockets of sheet steel for PC/IW
  - Wiring plan pockets made of plastic
- Roof/interior installation
  - Roof plates TS
  - Partial mounting panel TS
- Interior installation
  - Hinge attachment
  - Retaining rail TS
  - Mounting panel
  - Mounting bracket/ mounting panel
  - Mounting panels
  - C rails
  - Support rails TS 35
  - Torx screws
  - Torx screws
  - Self-tapping screws
  - Self-tapping screws
  - Spring nut M5
  - Universal bracket
  - System mounting block for AE
  - Component shelf, fixed installation
- Component shelves
  - Component shelf, Pull-out
  - Drawer tray
  - Cross members
- Component shelves
  - Telescopic slides
  - Drawer extension lock
  - Catch
- Keyboard drawer
  - Bracket, locatable for shelves
  - Keyboard drawer 199/2 U
  - Keyboard drawer with mousepad support
  - Support for keyboards
  - Enclosure surface connector
  - Mousepad support
- Keyboards
  - Keyboard, pull-out
  - Desktop keyboard NEMA 12
  - Stainless steel keyboard 199/4 U
- TFT monitor
  - TFT monitor
  - Power pack for TFT monitor
  - Connection cable
- Mouse/mousepad
  - Mouse, mousepad IP67
  - Mousepad support
  - Mouse holder
- Mobile workstation
  - Mobile workstation
  - Base
- Lights
  - System light
  - Signal pillars
- Voltage supply
  - Power strips
  - Versions:
- Grounding
  - Grounding straps
  - Grounding strap
  - Contact washers
  - Grounding rail, horizontal (potential equalization rail)
- Grounding/swing frames
  - Grounding plate
  - Swing frames
- 199 configuration
  - Mounting angles, 199 for DKTS
  - TS system chassis with mounting flange 17 x 73 mm (0.679 x 2.879), notched
  - Assembly screws M5 x 16 mm (0.639)/ M6 x 16 mm (0.639)
  - Torx screw M5 x 16 mm (0.639)/ M6 x 16 mm (0.639)
  - Captive nuts M5/M6
Table of order numbers
Index
o RFQ / o Order

Navigation menu