Rittal Systems For The Human/Machine Interface 102656 Catalog

: Pdf 102656-Catalog 102656-Catalog 639889 Batch12 unilog

Open the PDF directly: View PDF .
Page Count: 282

Download
Open PDF In Browser	View PDF

Industrial enclosures

Electronic packaging

Systems for the human/machine interface

Global Rittal. Worldwide service.
Small enclosures
Compact enclosures
Large enclosures
PC enclosures and case systems
Console systems
Industrial workstations
Command Panel systems
Stainless steel enclosures and support arm
systems
EMC-shielded enclosures
Ex enclosures

System climate control

Systems
for the
human/
machine
interface
Command Panel
Industrial workstations
PC enclosures
Console systems

Power distribution

IT solutions

Rittal Corporation
One Rittal Place
Springfield, OH 45504
Phone: (937) 399-0500
Fax: (937) 390-5599
Toll-free: 1-800-477-4000
www.rittal-corp.com
Email: rittal@rittal-corp.com

08/04 䡠 A141

Communication systems

R

R

Perfect systems
at the human / machine interface

All our knowledge and skills are dedicated to this
objective on a daily basis, throughout the world. As
leading global suppliers, we develop technology
packaging systems based on our comprehensive
product range. This is accompanied by a broad
portfolio of services and specialist areas of
competence.
This brochure invites you to find out more about the
systems for the human/machine interface within the
enclosure systems segment, and to utilize them for
your own benefit.

PERFORMANCE

Customer
solution
EMC, earthquake
protection,
environmental
protection

EXPERTISE

Planning
and
advice

SERVICE
Enclosure
systems

PRODUCTS

Electronic
packaging

System
integration

Quality
assurance

Assembly

System
climate
control

Power
distribution

Delivery
service

IT
solutions

Communication
systems

System partners with holistic expertise, worldwide

Systems for the human/machine interface

Rittal: Everything from a single source

Command Panel

Support arm systems

8 – 77

78 – 127

Floor-standing systems

132 – 149

Industrial workstations

150 – 169

PC enclosure systems

170 – 181

Console systems

182 – 199

System accessories

200 – 273

Climate control
Accessories

Service
Order number table
Index
Order forms

Systems for the human/machine interface

2–7

202 – 205
206 – 273

274 – 279
274 – 275
276 – 278
279

3

Our achievements are your advantages
The Rittal value-added package

In choosing Rittal, you are making the right decision. We
meet all your requirements in terms of flexibility, security,
cost-cutting and problem-solving expertise.
Everything is complete: the platform, the range, the timing,
the planning, the quality, the security.

We address worldwide market requirements, perform
development and testing at our own accredited
laboratories, and offer innovative, market-ready, costeffective solutions.

4

Systems for the human/machine interface

Solution diversity
through system
platforms
Our successful platform
strategy forms the basis for
our comprehensive standard
range. Perfect solutions for
various applications and to
suit individual customer
requirements are configured
cost-effectively from mass
production.

Secure your
competitive lead
with a quality
advantage
International approvals and
our own accredited
laboratories – the result? A
guaranteed standard of
quality available to customers
worldwide.

Systems for the human/machine interface

Pre-configuration
saves time

Complete, thanks to
system integration

Rittal products are perfectly
prepared for immediate use.
This saves assembly and
ordering time, as well as
warehousing costs. Fast
assembly of system accessories is an added bonus.

You tell us your requirements,
we supply you with an
individual complete solution
e.g. with coordinated climate
control, power supply and
security management up to
system integration Level 4.
All from Rittal, all from a single
source.

Perfect solutions
through planning
expertise

Eliminate the risks
with a security
advantage

Rittal's expert advisers know
their stuff – be it EMC
protection, earthquake
protection, climate control or
electronic components, all
technical questions relating to
a particular customer
requirement are expertly
answered.

Cut operating costs and
administration, and ensure
simple monitoring of all
security-relevant parameters
with comprehensive rack
security concepts: climate
control, power management
and access control.

Global proximity
with a local
presence
Our experience of international markets and the
global availability of our
products and services lead to
complete customer solutions.

Benefit from our
product portfolio
Rittal offers a wide range of
specialized solutions
available off the shelf for
immediate delivery, for all
segments of the market.
Documented in the main Rittal
Handbook.

5

Four systems at a glance
You have the requirements – we have the solution

We offer a broad spectrum of products to meet modern
requirements at the human/machine interface.
Superb quality, inexpensively priced, and ergonomically
tailored to individual requirements. Programming,
operating, monitoring. Solutions by people, for people.
These are derived from our conversations with customers,
our decades of development expertise, and our highly
skilled staff.

Command Panel

Industrial workstations

PC enclosure systems

Console systems

Rittal offers a wide range of
enclosure versions for all panel
combinations. In standard sizes,
or customized to your requirements.
Interaction between monitoring
and operation is achieved to perfection with the support arm and
floor-standing systems.

Industrial workstations offer more
work space than a PC cabinet
and are more compact than a
desk. Thanks to their modularity,
individual customer requirements
are met to perfection.

Secure accommodation of a
monitor, computer system, printer
and mouse becomes child's play,
thanks to factory automation with
the PC enclosure system.

Function and variability are
key features of all Rittal
console systems.
Three series accommodate
differing requirements in
terms of assembly, security
and operation.

6

Systems for the human/machine interface

Outstanding performance based on
customized solutions
and uncompromising
laboratory tests.

7

Rittal Command Panel . . .
. . . Meeting your requirements!

The interface between human and machine has a decisive effect

The VIP 6000 offers the greatest diversity for individual customer

on productivity. With this in mind, Rittal offers a wide range of

requirements. Where the emphasis is on a slimline design and

enclosure versions to suit virtually all panel combinations, tailor-

dimensional coordination with small operating units, the stylish

made, in standard sizes and in a variety of different materials.

Optipanel offers an ideal solution. The new Compact Panel in
standard sizes provides an alternative.
As well as the command panels shown here in sheet steel or
stainless steel, we are also happy to equip other small enclosures
as command panels for you.

VIP 6000

Optipanel

Compact Panel

Sizes:
5 depths,
screw-fastened or
hinged sections
height and width to
order

Sizes:
3 depths
height and width to
order

5 sizes:
238 x 241 x 87 mm
(9.37
 x 9.49
 x 3.43
)
to 388 x 315 x 87 mm
(15.28
 x 12.40
 x 3.43
)

Version:
3 front design
versions
5 color versions

Material:
Aluminum
Page 40 – 57

W
NE

Material:
Aluminum
Page 58 – 59

Material:
Aluminum
Page 12 – 39

Command Panel,
sheet steel
Versatile complete solutions
in sheet steel are available as standard.

Command Panel
housing with door,
with handle grips
6 sizes:
200 x 300 x 180 mm
(7.87
 x 11.81
 x 7.48
)
to 500 x 500 x 180 mm
(19.69
 x 19.69
 x
7.09
)
Material:
Sheet steel
Page 66 – 67

Premium Panel
Sizes:
for installed equipment
19
/7 U,
120 and 220 mm (4.72

and 8.66
) deep,
optionally with keyboard
housing for 19
/4 U

Command Panel,
stainless steel
For extremely discerning requirements
in terms of corrosion protection and
hygiene

Material:
Stainless steel
Page 60 – 63

8

Systems for the human/machine interface

10 – 77

VIP 6000

Command Panel,
with handle grips
5 sizes:
200 x 300 x 155 mm
(7.87
 x 11.81
 x 6.1
)
to 380 x 600 x 210 mm
(14.96
 x 23.62
 x
8.27
)

Command Panel,
with display panel
front
4 sizes:
380 x 380 x 249 mm
(14.96
 x 14.96
 x 9.8
)
to 600 x 600 x 249 mm
(23.62
 x 23.62
 x 9.8
)

Material:
Sheet steel

Material:
Sheet steel

Page 68 – 69

Page 70 – 71

Command Panel
housing with door
4 sizes:
300 x 300 x 150 mm
(11.81
 x 11.81
 x 5.91
)
to 400 x 600 x
150 mm (15.74
 x
23.62
 x 5.91
)

Command Panel
2 sizes:
240 x 320 x 160 mm
(9.45
 x 12.60
 x 6.30
)
and 320 x 400 x 160 mm
(12.6
 x 15.75
 x 6.30
)

Material:
Stainless steel

12 – 39

Optipanel

40 – 57

Compact Panel

58 – 59

Premium Panel, stainless steel

60 – 63

Command Panel

64 – 73

Command Panel, stainless steel

74 – 77

Command Panel,
with VIP 6000 frame
Sizes according
to choice
Material:
Sheet steel
Page 72 – 73

Material:
Stainless steel
Page 76 – 77

Page 74 – 75

Systems for the human/machine interface

9

Command Panel

Command Panel

Rittal Command Panel . . .
. . . Suggestions from industry, for industry

Our Command Panel solutions are as diverse as the
requirements placed on them. They are tailored to customer
requirements in terms of size, design and execution.
The VIP 6000 (from page 12), Optipanel (from page 40) and
Premium Panel (from page 60) are outstanding systems for
this purpose. All Rittal CP enclosure systems may be
combined with floor-standing and support arm systems.
Allow yourself to be inspired by the application examples

Example 1
Optipanel as a TFT case

Example 2
Optipanel divided with cross
member, slimline keyboard
housing with U handle

Example 3
VIP 6000 with narrow frame,
divided twice, with support arm
system CP-XL

Example 4
Wide VIP frame integrated into
a machine housing

Example 5
VIP 6000 with combined frame,
U handle and support arm
system CP-L

Example 6
VIP operating housing with
combined frame, interface box
and deep keyboard housing

shown here.

10

Systems for the human/machine interface

Command Panel
Example 7
Optipanel with controller and
emergency-off switch
integrated into the adaptor
panel

Example 8
Command Panel housing with
door and support arm system
CP-S in stainless steel

Example 9
Operating housing with
terminal box KL as keyboard
housing

Example 10
Command Panel housing with
door with signal pillar on
support arm system CP-L

Example 11
VIP 6000 with handle set for
wide frames on support arm
system CP-XL

Example 12
VIP 6000 with wide frame and
adjustable frame connector

Example 13
Stainless steel operating
housing with control
components. Suitable for
installation in the front or rear
panel

Example 14
Operating housing with wide
VIP 6000 frame and keyboard
drawer mounted in the front
panel

Example 15
Compact Panel with control
components integrated into the
front panel on support arm
sytem CP-S

Example 16
Premium Panel with side
support arm connection CP-S.
Particularly suitable for use in
the food industry.

Systems for the human/machine interface

11

Rittal Command Panel VIP 6000 . . .
. . . the yardstick of individuality

A solution is quickly found, simply by defining your requirements.
Tell Rittal the dimensions of the operator panel you are intending to
use, and the desired configuration type, and we will customize a
dimensionally accurate operating housing for you. Simply proceed
through the following pages step by step, and your solution will fit.
There is a choice of three design versions. What better framework
conditions could your operator panel have?

●
●
●
●
●
●
●
●
●

12

US Design Patent No. Des. 375,726
German patent no. 195 25,876
German Patent No. P 41 09 695
European patent no. 505,681
with validity for CH, DE, FR, GB, IT
German registered design
No. M 94 08 533
IR Reg. Des. No. DM/032 843
with validity for BE, CH, ES, FR, IT, NL
Austral. Reg. Des. No. 125352
Japanese Registered Des. No. 983 783
Austrian registered design no. 17467

●
●
●
●

Swedish registered design no. 58 996
South Korean Reg. Des. No. 191148
UK Reg. Des. No. 2047055
Brazilian design pattern
no. DI 5500 709-0

Command Panels
VIP 6000 have the
following
approvals:
● UL
● CSA
● TÜV
● DNV
● Lloyds Register
of Shipping
● BV
● VDE
Systems for the human/machine interface

VIP 6000 diversity

14 – 39
14 – 21

VIP 6000 selection

22 – 31

Technical details

32 – 39

Order form

279

This is how we implement your requirements: With the VIP 6000
concept, customized production for your panel is the norm. Every
operator panel is achieved quickly and precisely. Need a certain
depth, a defined color scheme or special ergonomic requirements?
With the Command Panel VIP 6000, we will supply you with a
unique product, tailored to your technical and aesthetic
requirements.

13

Command Panel

VIP 6000

The choice is yours.
You define the dimensions.
The VIP 6000 offers exceptionally diverse opportunities.
● Each of the three frames conveys its own
design lines with specific functions.
● Every enclosure is custom-built to order.
● Every operator panel is assembled quickly and precisely.

Three design lines
Narrow frame
An eye-catching
design with its
stylish lines,
particularly for small
enclosures.
Wide frame
A frame and
handle in one; the
ideal choice where
enclosures with fins all round
are used for better heat
dissipation.

Combined handle
The soft-coated
frame at the sides
is easy to hold
onto. This is also suitable for
use with enclosures with fins
at the sides.

Any size to order
Tell Rittal the dimensions of your selected
operator panel, and the frame you have
selected will be produced with dimensional
accuracy, together with all the sizedependent configuration components.
The few criteria you need to determine can
be found under “VIP 6000 selection” from
page 22.

14

Systems for the human/machine interface

Diversity: Frame and front design

Individual front design

There's always a solution
Subdivison of the operating level with Rittal standard modules fulfils
every requirement. Individual cutouts can be achieved, for
example, via the adaptor panel.
Should you have any queries, please contact your specialist Rittal
advisor. As we have said, there's always a solution!

Without subdivision

With cross member
or sealing bar

With two cross
members or sealing
bars; combinations
are also possible

With cross member
or sealing bar,
horizontal/vertical
combined

With spacing and
built-in trim panel.
May be positioned
at the top, bottom
or side.

Adaptor plate
with individual
cutouts
Trim colors to order
Cover trim, end trim
and spacer trim are
available in five colors.
The enclosure corner
protectors are likewise
produced in the
chosen trim color.
Customized colors can
also be produced for
larger orders.

Every attachment point is accessible on
all sides!
The movable retaining clips create
sufficient play to accommodate virtually all
hole spacings (distance from the panel’s
outer edge 7 – 13 mm (0.28
 to 0.51
).
Screw-fastening the operator panel to the
case from the outside is particularly easy.

A

B

The screw heads disappear stylishly
beneath the cover trim (A). Front panels
with threaded bolts may also be combined
with the end trim (B) or spacer trim (C),
depending on the material thickness.
Panels with screw clamp (D) are mounted
with the end trim.

C

D
VIP 6000 selection,
see page 22 – 31.
Order form,
see page 279.

Systems for the human/machine interface

15

Command Panel

VIP 6000

Enclosures with all the
options
Enclosures are customized to the size of the front panel.
● Installation depths of 155 to 438 mm (6.1
 to 17.24
),
screw-fastened or hinged sections.
● Hinged rear panels offer easy servicing.
● Out with the heat! Cooling fins in the enclosure panels
and rear panels or the VIP small cooling unit make this
possible.

Installation depth 155 mm (6.1
)

Installation depth 185 mm (7.28
)

Installation depth 295 mm (11.61
)

Installation depth 328 mm (12.91
)

Installation depth 438 mm (17.24
)

Tailor-made operating housing
There are five installation
depths avaialble, depending
on the dimensions of the front
panel.
Screw-fastened or hinged
depending on your requirements, they offer space for:
industrial PCs, machine control
panels, flat screens and monitors, keyboard drawers, drives,
bus modules and every other
conceivable application.

Versatile configuration is individual and easy, thanks to the
internal screw channels.

Rear panels to order
Screw-fastened or vertically/
horizontally hinged – choose
the rear panel to suit your
servicing requirements.
A depth extension of 45 or
245 mm (1.77
 or 9.65
) can
also be achieved using special
rear panels.

16

Systems for the human/machine interface

Diversity: Enclosures, rear panels, heat dissipation

Effective heat dissipation
Because it is equipped with cooling fins,
the VIP 6000 solution often eliminates the
need for active cooling components.
Even the VIP 6000 enclosure version
without fins boasts excellent heat loss
dissipation.
As indicated by the example below with
an installation depth of 155 mm (6.1
),
with all-round cooling fins the
dissipatable heat loss is increased by
approximately 30 %. With air circulation
inside the enclosure, the dissipatable
heat loss is increased by up to a further
15 %. A further significant increase in
heat dissipation can be achieved with
the modular cooling rear panel.

Dissipatable heat loss*

Installation
depth:
155 mm (6.1
)

+
19
/
7U

Fins all
round

+

Cooling rear
panel,
modular

19
/
7 + 3.5 U

Cooling rear
panel,
modular
Fins at sides

80 W

88 W

100 W

110 W

95 W

105 W

115 W

127 W

110 W

121 W

130 W

148 W

Without fins

No fins

Side fins

Fins all round
* Pv (W) at ∆T = 20 K
Enclosures with an installation depth of 185 mm (7.28
) and 328 mm
(12.91
) do not have any fins immediately behind the front frame at a
depth of 44 mm (1.73
).

VIP SK small cooling unit
If cooling fins are not enough –
particularly with warm ambient
air – this cooling unit offers
peace of mind. A space-saving,
cost-effective solution, specifically designed for the VIP 6000.

Out with the heat – even
without expensive active
cooling modules!
Cooling fins on the enclosure
panels (either all-round or on
the sides only, as you prefer)
and the rear cooling panel
achieves a substantial
increase in the amount of heat

loss dissipated compared with
enclosures without fins. This is
achieved due to a combination
of cooling fins on the outside,
and screw channels on the
inside. In this way, heat is
absorbed and dissipated to the
outside to optimum effect.

VIP 6000 selection,
see page 22 – 31.
Order form,
see page 279.

Systems for the human/machine interface

17

Command Panel

VIP 6000

For optimum ergonomic
conditions
Further diversity from the modular system:
● Keyboard housing in three different depths.
● Support arm systems swivel, rotate, raise and lower the
operating unit at any given point.
● Stationary and mobile floor-standing systems.
● Handle sets make it easier to hold and steer.

The matching keyboard
housing
For all three frame types, keyboard
housings are available in the installation
depths 105 and 44 mm (4.13
 and 1.73
).
For the wide frame, a depth of 27 mm
(1.06
) is available in two versions.
The width of the keyboard and operating
housing is identical with the wide VIP 6000
frame. With narrow and combined VIP 6000
frames, different widths of keyboard and
operating housings may also be used.

Installation depth 105 mm (4.13
)

Installation depth 44 mm (1.73
)

Keyboard housing connector

Installation depth 27 mm
(1.06
) with cable entry
grommet or cable tube,
flexible

Depending on the chosen VIP 6000 frame,
rigid and adjustable connections between
the operating housing and the keyboard
housing are available.
Wide
frame

Frame connector,
rigid
Tilting angle 120°

Frame connector, adjustable
Tilting angle adjustable from
75° – 120° in 7.5° increments

Cable tube, rigid
in conjunction with
enclosure depth
105 mm (4.13
)

Cable tube, flexible
to fit enclosures in depths 105, 44
and 27 mm (4.13
, 1.73
 and
1.06
) (with cable tube connection)

18

Combined
frame

Enclosure duct connector
Tilting angle 120°, rigid, with
integral cable tube, for enclosure
installation depth 105 mm (4.13
)

Narrow
frame

Enclosure bar connector
Tilting angle 120°, rigid, for
enclosure installation depth
44 mm (1.73
)

Hinged frame connector
Tilting angle 75° – 120°
infinitely adjustable

Systems for the human/machine interface

Diversity: Keyboard housings and ergonomics

Precisely the right position
Different viewing angles of the machine,
whether the operating staff are tall or short,
sitting or standing – with Rittal support arm
systems, the Command Panel is always in
the optimum position.
Depending on the system configuration,
arm length and enlcosure weight, support
arm systems CP-L or CP-XL are used. If
you want to combine a high load capacity
with a stylish look, system combinations
provide the ideal solution.

Always within reach
Tailored precisely to the operator's
requirements, various handle sets may be
fitted in accordance with ergonomic
requirements. “Moving” the enclosure
becomes effortless.

Stationary
or mobile
Floor-standing systems in a variety
of designs – even
height-adjustable –
round out the application diversity of the VIP
6000 Command Panel.

VIP 6000 selection,
see page 22 – 31.
CP pedestal, heightadjustable

Systems for the human/machine interface

Mobile pedestal

Pedestal base plate

Order form,
see page 279.

19

Command Panel

VIP 6000

Nothing’s impossible . . .
A kaleidoscope of incredible solution diversity.
Configure your perfect enclosure. Allow yourself to be
inspired by these examples:
e.g. by the front divisions, the handle arrangements, the
enclosure depths, and much more besides.

. . . with wide frame.
A small selection from the wide range of opportunities available.
For enclosures with cooling fins, the wide frame is important.

Example A
● Operating housing,
155 mm (6.1
) deep
● Keyboard housing,
27 mm (1.06
) deep,
with cable entry
grommet
● Frame connector,
adjustable
● Vertical handle set
● With vertical and
horizontal cross
member
● Support arm
connection at
bottom

Example B
● Operating housing,
155 mm (6.1
)
deep
● Side keyboard
housing, 44 mm
(1.73
) deep
● Frame connector,
rigid
● Vertical handle set
with clipboard
● With horizontal
cross member and
vertical sealing bar
● Support arm
connection at
bottom

Example C
● Operating housing,
155 mm (6.1
) deep
● Keyboard housing at
top, 44 mm (1.73
)
deep, with adjustable
frame connector
● Keyboard housing at
bottom, 44 mm (1.73
)
deep, with rigid frame
connector
● Cable tube, flexible
● Vertical handle sets
● Support arm
connection
at bottom

Example D
● Operating housing,
155 mm (6.1
)
deep, with vertical
handle set
● Keyboard housing
with handle set,
horizontal and
vertical
● Cable tube,
flexible
● Support arm
connection at
bottom

Example E
● Operating housing,
155 mm (6.1
)
deep
● Keyboard housing,
105 mm (4.13
)
deep
● Frame connector
and cable tube,
rigid
● Support arm
connection at
bottom

Example F
● Operating housing,
438 mm (17.24
)
deep, for color
screen
● With horizontal
handle set
● With horizontal
sealing bar
● Support arm
connection at top

20

Systems for the human/machine interface

Diversity: Configuration examples
. . . with narrow frame.
Stylish lines for small enclosures and those without fins.

Example G
● Operating housing,
155 mm (6.1
)
deep
● With U handle,
vertical
● Enclosure
connector,
adjustable, on the
left-hand side for
vertically hinged
wall mounting

Example H
● Operating housing,
155 mm (6.1
)
deep
● Keyboard housing,
105 mm (4.13
)
deep
● Enclosure duct
connector
● Support arm
connection at
bottom

Example I
● Operating housing,
155 mm (6.1
)
deep
● Keyboard housing,
44 mm (1.73
)
deep
● Hinged frame
connector
● U handles –
vertical
● Cable tube,
flexible
● Support arm
connection at top

Example J
● Operating housing,
155 mm (6.1
) deep
● Keyboard housing,
44 mm (1.73
) deep
● With enclosure bar
connector
● With corner handles
● Cable tube, flexible
● Support arm
connection
at bottom

Example K
● Operating housing,
155 mm (6.1
)
deep
● Keyboard housing,
44 mm (1.73
)
deep
● Enclosure bar
connector
● Support arm
connection at
bottom

Example L
● Operating
housing, 185 mm
(7.28) deep,
hinged
● Keyboard
housing, 44 mm
(1.73
) deep
● Enclosure bar
connector
● Cable tube,
flexible
● Support arm
connection at top

. . . with combined frame.
The soft-coated frame at the sides is particularly sympathetic to the
touch.

Example M
● Operating housing,
155 mm (6.1
)
deep
● Keyboard housing,
44 mm (1.73
)
deep
● Enclosure bar
connector
● Cable tube,
flexible
● Support arm
connection at top

Example N
● Operating and
keyboard housing
in various widths
● Keyboard
housing, 105 mm
(4.13
) deep, with
cross member
● Enclosure duct
connector
● U handle,
horizontal
● Support arm
connection at top

Example O
● Operating housing,
155 mm (6.1
) deep
● Keyboard housing,
top, with hinged
frame connector
● Keyboard housing,
bottom, with
enclosure bar
connector
● Cable tube, flexible
● Support arm
connection at top

Example P
● Operating housing,
155 mm (6.1
)
deep
● Corner handles
● Support arm
connection at top

Systems for the human/machine interface

Command Panel

VIP 6000

VIP 6000
Selection: Operating housing / keyboard housing
We will need the following
information in order to deal
with your enquiry/order:
● Model No. front frame:
CP 6392.X09
● The dimensions and number
of panels/front panels to be
installed in the operating/
keyboard housing
● Design code number for the
operating/keyboard housing

.009

.209
.109

Order form, see page 279

1. Front frame
Select the frame to match your
requirements. It is used automatically for a keyboard
housing as well.
1) For keyboard housing
depth 27 mm (1.06
) not
possible (see selection 4.1).

Wide frame
Extruded aluminum
section

0

Die-cast zinc corner
pieces
Color: RAL 70352)
finely textured

Combined frame1)
Extruded aluminum
section in finely textured
RAL 70352) (top/bottom),
horizontal

Narrow frame1)
Extruded aluminum
section

1

Die-cast zinc corner
pieces

Soft-coated frame similar
to RAL 7024 (sides),
vertical

Color: RAL 70352)
finely textured
Note:
Only possible with
enclosures without
cooling fins.

Die-cast zinc corner
pieces, RAL 70352)

2)

Other RAL colors
available on request.

2

Note:
Not possible with enclosures with all-round
cooling fins.
Part No. CP

6 3 9 2 .

0 9

2. Panel dimensions
2.1 For operating housings CP 6392.X09
On the order form, please state the number of front panels/panels
used, their Height (H) x Width (W) x Depth (D) and the manufacturer/model, using the installation criteria below.

With the following installation
criteria, please check whether
your operator panels may be
installed directly into the
VIP 6000.
Otherwise, an adaptor panel is
needed – cf. 3.2, design code
number 6 , see page 24. The
dimensions of the command
panel and keyboard housing
are derived from the dimensions of your panel and the
number of cross members.
1 7 to 13 mm (0.28
 to 0.51
)

edge spacing of the
mounting holes or bolts.
2 Front panel projection on
sides with mounting holes or
bolts at least 17 mm (0.69
),
on sides without mounting
holes at least 6 mm (0.24
).

3 Front panel thickness

variable, depending on the
type of trim section see page
25, version 3.4.
4 Installation depths:
Command panels = 155 mm
(6.1
), 185 mm (7.28
)1),
295 mm (11.61
1), 328 mm
(12.91
)1), 438 mm (17.24
)1).
Command panel with 45 mm
deep rear panel2) = 200 mm
(7.87
), 230 mm (9.06
)1),
340 mm (13.39
)1), 373 mm
(14.69
)1), 483 mm (19.02
)1).
Command panel with
245 mm deep rear panel2) =
400 mm (15.75
), 430 mm
(16.93
)1), 540 mm (21.26
)1),
573 mm (22.26
)1), 683 mm
(26.89
)1).
5 For versions with a hinged
rear panel, the maximum
installation depth is reduced
by 27 mm (1.06
) in the
vicinity of the lock.

4
2

3

H

1

W

5
R 38
98.5

98.5

2) Other

depths available on
request.

22

min. 6

7 – 13

H

1)

Enclosure without fins with a
60 mm (2.36
) deeper rear
section available on request.

2

3

7 – 13

29

Checking the
installation criteria

2.2 For keyboard housings CP 6351.X09
On the order form, please state the Height (H) x Width (W) x Depth
(D) of the keyboard/panel and the manufacturer/model, using the
installation criteria below.

min. 17

B

T = Depth
B = Width

T

Systems for the human/machine interface

Selection: Operating housing
3.1 Installation depth
Material:
Enclosure:
Extruded aluminum section
Corner protectors:
Plastic, self-extinguishing
Finish:
Enclosure: Natural anodized
Note:
Support arm connection,
see 3.6.
Drawing view from above.
R/h hinge is also possible.

Installation depth:
155 mm (6.10
)

Technical details,
see page 32/33.

Installation depth:
185 mm (7.28
)1)

3.1
1
screw fastened

Installation depth:
295 mm (11.61
)1)
3.1
2

screw fastened

3.1
4
screw fastened

3.1
3

hinged2)
Support arm system
CP-L
Support arm system
CP-XL

prepared
with adaptor
CP 6528.500

3.1
5

hinged2)

prepared

prepared

with adaptor
CP 6528.500

with adaptor
CP 6528.500

Installation depth:
328 mm (12.91
)1)

Installation depth:
438 mm (17.24
)1)
3.1
6

screw fastened

3.1
8
screw fastened

3.1
7

hinged2)
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

Support arm system
CP-L
Support arm system
CP-XL

1) Enclosure without fins with a 60 mm
(2.36
) deeper rear section available on
request.

Systems for the human/machine interface

2) Cam

with adaptor
CP 6528.0003)
prepared

lock with double-bit lock insert may
be exchanged for lock inserts 41 mm
(1.61
), version C, see page 246.

3.1
9

hinged2)
with adaptor
CP 6528.0003)
prepared

3) Provided the admissible load capacity of
the support arm system is adequate (see
page 96).

23

Command Panel

VIP 6000

VIP 6000
Selection: Operating housing
3.2 Front design
Cross member
For horizontal and/or vertical
division. With channel on both
sides for mounting kits,
see page 233.
Material:
Extruded aluminum section,
RAL 7035.

Sealing bar
For horizontal and/or vertical
division. The “slot-free” division
produces a height gain of
28 mm (1.10
).

Without
cross
member

3.2
0

With two
cross
members

3.2
3

With one
adaptor plate
(to specifications)

3.2
6

With one cross member

3.2
1

With one sealing bar1)

3.2
2

Material:
Extruded aluminum section
8 x 20 mm (0.79
), natural
anodized

Adaptor plate
Material thickness:
3 mm (0.12
) aluminum, natural
anodized.
Please specify the dimensions
for the front panel and the
desired holes and cutouts.

Spacing and
Built-in trim panel

With two sealing bars1)

3.2
4

With one cross member
and one sealing bar1) 2)

3.2
7

With spacing and
built-in trim panel at
the bottom3)

3.2
5

For additional space for cable
entry and for the installation of
switches/indicator lights,
emergency off/key switches,
CD-ROM drives, interfaces etc.
With channel on one side for
mounting kits, cf. page 233.
Material:
Extruded aluminum section,
natural anodized.
Technical details,
see page 34.

Additional parts
Mounting kit for installing front
panels, operating panels and
keyboards in operating and
keyboard housings,
see page 233.

With spacing and
built-in trim panel at
the top3)

3.2
8

With front panel
3.2
hinged4)
For example, if a disk drive 9
built into the operator panel
necessitates free access.
Standard design
● Screw-fastened from the
outside
● R/h hinge

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

1) Not possible with spacer trim
(cf. 3.4).

24

2) Unless otherwise specified:
Sealing bar at the top,
Cross member at the bottom.

3) Only for use in conjunction
with end trim.

4) Screw-fastened from the
inside, with cam or l/h hinge on
request.

Systems for the human/machine interface

Selection: Operating housing
3.3 Cooling fins

No fins

3.3
1

Fins at sides

3.3
2

Fins all round

3.3
3

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

Fin design is chosen according to the heat loss
to be dissipated, see page 17.

Enclosures with an installation depth of 185 mm
(7.28
) and 328 mm (12.91
) do not have any fins
immediately behind the front frame at a depth of
44 mm (1.73
). The color of the corner protectors
matches the trim color selected under 3.5.

3.4 Trim types
Technical details,
see page 35.

Cover trim
3.4
To conceal the
1
front panel
assembly screws.
For front panel
thickness up to
3.5 mm (0.14
).

End trim
Attractively finishes off
the space between the
front panel and the frame
section. For all front
panel thicknesses.

3.4
2

Spacer trim
For installed equipment
flush with the frame
section.
For front panel thickness
up to approx. 3.5 mm
(0.14
).

3.4
3

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

3.5 Trim colors

Turqoise
(similar to
RAL 5018)

3.5
1

Pebble grey
(similar to
RAL 7030)

3.5
5

Bright blue
(similar to
RAL 5005)

3.5
2

Graphite
(similar to
RAL 7024)

3.5
6

Bright red
(similar to
RAL 3001)

3.5
3

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

Note:
Enclosure corner protectors are also supplied in the chosen color. Other colors available on request with larger orders.

Systems for the human/machine interface

25

Command Panel

VIP 6000

VIP 6000
Selection: Operating housing
3.6 Support arm /
wall connection
3 different support arm
systems, see page 80 and
various floor-standing systems,
see page 132 are available.
Note:
Support arm connection CP-S
for small enclosures with an
installation depth of 155 mm
(6.10
) are selected by adding
an “S” after the design code
number.

Without
connection

3.6
0

Connection,
top

Connection,
bottom

3.6
2

Connection, 3.6
top and
3
bottom,
one cover plate
included

3.6
1

Wall
connection,
rigid,1)
see page 226

3.6
X

Technical details,
see page 32.

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

Wall connec- 3.6
tion, vertically
0
hinged,
see page 226
1) When ordering, please specify
the position of the enclosure duct
connector.

3.7 Preparation
for mounting
keyboard housings
Technical details,
see page 32 – 33.
Without
3.7
connection
0
to the keyboard housing
To fit
keyboard housing depth:

Connection of operator panel
to keyboard housing:
(Selection 4.4, page 30)
Cable tube:
(Selection 4.5, page 31)

–
–

Connection to frame
connector either rigid
or adjustable

3.7
1

105 (4.13)
44 (1.73)
27 (1.06)

–

–

Frame connector,
rigid/adjustable

Enclosure
duct connector

–

rigid/flexible

Enclosure
duct connector

To fit
keyboard housing depth:

26

Connection of operator panel
to keyboard housing:
(Selection 4.4, page 30)
Cable tube:
(Selection 4.5, page 31)

3.7
2

105 (4.13)
–

–

Connection with
3.7
enclosure bar connector
3

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

Connection with
enclosure duct
connector

Connection with hinged
frame connector

–
44 (1.73)
Enclosure
bar connector

105 (4.13)
44 (1.73)
Hinged
frame connector

flexible

flexible

3.7
4

Systems for the human/machine interface

Selection: Operating housing
3.8 Rear panels

Screw fastened
Material:
Aluminum,
natural anodized.

3.8
1

Hinged1)
For rapid
service access

3.8
2

Depth plus 45 mm (1.77
) 3.8
Hinged,
3
screw fastening

Material:
Aluminum, natural anodized.

Material:
Sheet steel, RAL 7035

Depth plus 245 mm
(9.65
),
square2), screw-fastened

Hinged1)
for heavy installed
equipment

1) On the longest side (right/
bottom), cam with double-bit
insert, may be exchanged for
lock inserts 41 mm (1.61
),
version C, see page 246,
plastic handles and T handles,
version C, see page 245 – 246.

3.8
4

Material:
Sheet steel, RAL 7035

3.8
5

Material:
Aluminum, natural anodized.

2) For 482.6 mm (19
)/7 U
concave

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

Screw-fastened with
3.8
built-in VIP SK small
6
cooling unit, condenser
configuration left top
Recommendation for command
panel design
(see 3.1 Installation depth,
3, 5, 7, 9)

Screw-fastened with
3.8
built-in VIP SK small
7
cooling unit, condenser
configuration right top
Recommendation for command
panel design
(see 3.1 Installation depth,
3, 5, 7, 9)

Material:
Aluminum, natural anodized.

Material:
Aluminum, natural anodized.

Technical details,
see page 202.

Technical details,
see page 202.

Rear cooling panel
modular3)
Significantly increases
heat dissipation from the
enclosure!

3.8
8

Material:
Extruded aluminum section,
natural anodized
Technical details and
arrangement of the sections,
see page 35.

3) When

installing the pull-out keyboard CP 6002.100
(see page 263) in the VIP 6000, design version 3.1, no. 1 the
11 mm (0.43
) cooling fins and screw channels protruding into the
enclosure may be milled off.
Please state the installation position when ordering.

Systems for the human/machine interface

27

Command Panel

VIP 6000

VIP 6000
Selection: Keyboard housing
4.1 Keyboard
housing
Without fins.
For installing or positioning
keyboards on top (with a depth
of 27 mm (1.06
).
All keyboard housings are
custom-produced to your
dimensions. When selecting
the wide front frame, the width
of the keyboard housing
depends on the operating
housing.
Material:
Extruded aluminum section

Installation depth
105 mm (4.13
) for
built-in keyboards

4.1
1

Installation depth
44 mm (1.73
) for
built-in keyboards

4.1
2

Technical details,
see page 36 – 38.

Example of the versatility of
the keyboard housing:
External mounting on doors
With all keyboard housings, the
rear panel may be supplied
prepared for external mounting
on flat surfaces on request.

Additional parts

Additional parts

Enclosure duct connector
CP 6006.000, see page 226.
For mounting and cable entry.
Cross-brace for door
TS 8800.960 / TS 8800.980,
for mounting on 600/800 mm
(23.62
/31.50
) wide doors
TS/ES.

Mounting kit for installing front
panels, operating panels and
keyboards in command panels
and keyboard housings,
see page 233.

Depth 27 mm (1.06
)
with cable entry
grommet, for desktop
enclosures

4.1
3

Depth 27 mm (1.06
)
with cable tube, flexible,
for desktop enclosures

4.1
4

Support for keyboards 1) 4.1
5

4.1 4.2 4.3 4.4 4.5

1) Only in conjunction with
hinged frame connector, cf. 4.4
design code number 5 .

28

Systems for the human/machine interface

Selection: Keyboard housing
4.2 Trim types1)
Technical details,
see page 35.

Cover trim
3.4
To conceal the
1
front panel
assembly screws.
For front panel
thickness up to
3.5 mm (0.14
).

End trim
Attractively finishes off
the space between the
front panel and the frame
section. For all front
panel thicknesses.

3.4
2

Spacer trim
For installed equipment
flush with the frame
section.
For front panel thickness
up to approx. 3.5 mm
(0.14
).

3.4
3

4.1 4.2 4.3 4.4 4.5

1) Cannot be selected with keyboard housing depth 27 mm (1.06
) or support for
keyboards. In such cases, please enter an X.

4.3 Trim colors1)
Note:
Enclosure corner protectors
may also be supplied in the
chosen color.
Other colors available on
request with larger orders.

Turqoise
(similar to
RAL 5018)

4.3
1

Pebble grey
(similar to
RAL 7030)

4.3
5

Bright blue
(similar to
RAL 5005)

4.3
2

Graphite
(similar to
RAL 7024)

4.3
6

Bright red
(similar to
RAL 3001)

4.3
3

4.1 4.2 4.3 4.4 4.5

1) Cannot be selected with keyboard housing depth 27 mm (1.06
) or support for
keyboards. In such cases, please enter an X.

Systems for the human/machine interface

29

Command Panel

VIP 6000

VIP 6000
Selection: Keyboard housing
4.4 Keyboard
housing connector
Supplied loose with the
keyboard housing for
connecting operating housings
and keyboard housings.
Technical details,
see page 39.

Keyboard housing depth:

Tilting angle:
Cable tube:

Frame connector,
(rigid)

4.4
1

105 (4.13
)
44 (1.73
)
27 (1.06
)
120°, rigid
See 4.5

Frame connector,
(adjustable)

4.4
2

105 (4.13
)
44 (1.73
)
27 (1.06
)
75 – 120°,
adjustable in 7.5° increments
See 4.5

To fit operating and keyboard
housings with the same width.

To fit operating and keyboard
housings with the same width.

Material:
Die-cast zinc, RAL 7035

Material:
Die-cast zinc, RAL 7035

Enclosure
duct connector

4.4
3

105 (4.13
)
–
–
120°, rigid
Integral
To fit operating housings with
keyboard housing 105 mm
(4.13
) deep, also in different
widths.
Material:
Aluminum, RAL 7035

Enclosure
bar connector

Keyboard housing depth:
Tilting angle:
Cable tube:

4.4
4

–
44 (1.73
)
120°, rigid
See 4.5
To fit operating housings with
keyboard housings 44 mm
(1.73
) deep, also in different
widths.
Material:
Sheet steel, RAL 7035

Hinged
frame connector

4.4
5

105 (4.13
)
44 (1.73
)
75 – 120°,
infinitely adjustable
See 4.5
To fit operating housings with
keyboard housings 105, 44 mm
(4.13", 1.73
) deep and support
for keyboards, also in different
widths.
Material:
Aluminum, RAL 7035

4.1 4.2 4.3 4.4 4.5

30

Systems for the human/machine interface

Command Panel

VIP 6000
Selection: Keyboard housing
4.5 Cable tube

Without cable tube

4.5
0

Cable tube, rigid

Cable tube, flexible

4.5
1

Suitable for cable entry when
using the frame connector,
adjustable, hinged frame
connector or enclosure bar
connector. External mounting
on keyboard housings with
105, 44 or 27 mm (4.13
, 1.73

or 1.06
) depth or support for
keyboards.

Suitable for cable routing when
using the rigid frame connector
(for wide frames) and keyboard
housings with a depth of
105 mm (4.13
).
Material:
Aluminum, RAL 7035
Note:
Not possible with:
3.1 Operating housing,
design code numbers 3 and 7.

Material:
Plastic, RAL 7035
Note:
Not possible with:
4.1 Keyboard housing,
design code number 3.

4.4 Keyboard housing
connector,
design code number 2.
4.1 4.2 4.3 4.4 4.5

Examples
The picture opposite shows the solution we
have chosen, together with its
corresponding design code number.
The following key explains how the code
number in our example is made up.

We need the following information in
order to deal with your enquiry/order:
● Part No. front frame: CP 6392.X092)
● The dimensions and number of
panels/front panels to be installed in
the operating/keyboard housing
● Design code number for the
operating/keyboard housing
Order form, see page 279.

Operating housing

Keyboard housing

Part No.: CP 6392.009

Part No.: CP 6351.009

Design code number:

Design code number:

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8
1 1 2 1 2 2 1 2

4.1 4.2 4.3 4.4 4.5
1 1 2 1 1

4.5
2

3.1
1

3.4

3.3

1

2

3.5

3.8

2

2

3.2
1

3.7
1

3.6
2

4.5
3.1 1

Operating housing,
Installation depth 155 mm (6.1
)

3.2 1

1 cross member

3.3 2

Cooling fins (sides)

3.4 1

Cover trim

3.5 2

Trim color: Bright blue

3.6 2

Support arm connection at bottom

3.7 1

Frame connector and
cable tube

3.8 2

Rear panel, hinged
with double-bit lock

Systems for the human/machine interface

4.1 1

Keyboard housing,
installation depth 105 mm
(4.13
)

4.2 1

Cover trim

4.3 2

Trim color: Bright blue

4.4 1

Frame connector, rigid

4.5 1

1

4.4
1

Cable tube, rigid

4.2

4.3

1

1

4.1
1

2) Replace X with the number after
selecting the front frame.

31

3.1 Installation depth
Front frame, wide

Narrow

Combined

B6 (B1 + 12)

H2 (H1 + 77)

H2 (H1 + 77)

B4 (B1 – 8)

H4 (H1 – 8)

H5 (H1– 33)

H1

H6 (H1 + 12)

H2 (H1 + 133)

B1

B5 (B1 – 33)

B2 (B1 + 88)

B2 (B1 + 77)
B2 (B1 + 133)

Support arm connections

1 155 mm (6.10
)
B3 (with fins/partial fins: B1 + 85)

CP-L, round

B3 (without fins: B1 +55)

CP-XL

B7 (B1 + 43)

80
173 (176)

31 (34)

68

33

80

2
11

max. installation depth 155

Ø

B5 (B1 – 33)

82

68

7

7

B8 (B1 + 25)

Ø

Crosssection
cable tube

Ø 70

Ø 100

Support arm connection,
for system CP-L, round

Dimensions in brackets refer to narrow and combined front frames

2 185 mm (7.28
), screw-fastened

3 185 mm (7.28
), hinged
Support arm connection for system CP-L, round

X

Dimensions in brackets refer to narrow and combined front frames

17
Only for CP 6392.009

32

Height dimensions:
H1 = Height of front panel
H2 = Overall height
H3 = Enclosure height
(with fins: H1 + 85 (3.35
);
without fins: H1 + 55 (2.17
))
H4 = Clearance height between
enclosure sections
H5 = Clearance height between
the retaining clips
H6 = Clearance height between
the front frames
H7 = Height of rear panel (H1 + 43 (1.69
))
H8 = Internal clearance of enclosure,
height (H1 + 25 (0.98
))

A = Max. installation space
with hinged housings
X
Max. installation depth

Width dimensions:
B1 = Width of front panel
B2 = Overall width
B3 = Enclosure width
B4 = Clearance width between
enclosure sections
B5 = Clearance width between
the retaining clips
of the mounting kit
B6 = Clearance width between
the front frames
B7 = Width of rear panel
B8 = Internal clearance of enclosure,
width

Collision zone

Y

A

17

17*

0°

A

max. 13

Only for CP 6392.109
and CP 6392.209

Y

205 (208)

143

68
113

max. inst depth 185

Support arm connection for system CP-L, round

B1

* see page 22.

Systems for the human/machine interface

Technical details
4 295 mm (11.61
), screw-fastened

5 295 mm (11.61
), hinged

max. installation depth 295

A

Y
210

X
316 (319)

222

max. installation depth 295

Support arm
connection,
for system CP-L,
round

Support arm connection,
for system CP-L, round
max.
170°

17

Dimensions in brackets refer to narrow and combined front frames

7 328 mm (12.91
), hinged

th 32
n dep
insta
llatio

348 (351)

max.

Support arm
connection for
System CP-XL

Y
Only for CP 6392.109
and CP 6392.209

Dimensions in brackets refer to narrow and combined front frames

X
max. 13
0°

Support arm
connection for
system CP-XL

222

254

max. installation depth 328

8

6 328 mm (12.91
), screw-fastened

A

17
Only for CP 6392.009

llatio
n dep

th 43
8

222

insta

Support arm
connection for
System CP-XL

max.

Y
X

A

Dimensions in brackets refer to narrow and combined front frames

max. 16
0°

Support arm
connection,
for system CP-XL

9 438 mm (17.24
), hinged

458 (461)

max. installation depth 438

364

8 438 mm (17.24
), screw-fastened

17

Calculating the swivel mounting space
(Version 3 and 5 )

Calculating the swivel mounting space
(Version 7 and 9 )

100

260

90

240
220

80

200

70

180

60

160
140

50

Y

120

40

100

30

80

X, Y (mm)

X, Y (mm)

Y

20

X
10
0
250

300

350

400

450

500

Front panel width B1 (mm)
Systems for the human/machine interface

550

600

482.6 mm (19˝)

650

700

750

60

X

40
20
0
250

300

350

400

450

Front panel width B1 (mm)

500

550

600

650

700

750

482.6 mm (19˝)

33

Command Panel

VIP 6000

3.2 Front design
1

3

5 Cross member

2

5 Sealing bar

4

Front panel 1

H1 top

Front panel 1

H1 top
H1 bottom

20

28.5
H1 bottom

17

Sealing bar
CP 6015.500

Front panel 2

Front panel 2
Cross member
CP 6015.000

Minimum front panel width (B1)
Depending on the
● Installation depth of the operating housing
● Connection between the operating housing/keyboard housing
● Position of the support arm connection
Dimensions in mm (inches)

155 (6.10
)
1

Connection to
keyboard housing
(see 3.7,
page 26)

Position of
support arm
connection
(see 3.6,
page 26)

Installation depth of operating housing (see 3.1, page 23)
185 (7.28
)
295 (11.61
)
328 (12.91
)
4

6

8

3

5

7

9

0 to 3
0 None

top or
bottom

Minimum front panel width
169 (6.65
)

265 (10.43
)

169 (6.65
)

265 (10.43
)

169 (6.65
)

265 (10.43
)

169 (6.65
)

265 (10.43
)

339 (13.35
)*

445 (17.52
)*

339 (13.35
)*

445 (17.52
)*

189 (7.44
)

265 (10.43
)

189 (7.44
)

265 (10.43
)

339 (13.35
)

445 (17.52
)

339 (13.35
)

445 (17.52
)

169 (6.65
)
265 (10.43
)
169 (6.65
)
top
bar connector
2 and 3
397 (13.35
)*
445 (17.52
)*
397 (15.63
)*
bottom
* Smaller front panel widths for asymmetrical support arm connection available on request.

265 (10.43
)

1 Frame
connector or
4 Hinged frame
connector

1

top
2 and 3
bottom
1

2 Enclosure

duct connector

top
2 and 3
bottom
1

3 Enclosure

34

438 (17.24
)

2

265 (10.43
)

445 (17.52
)*

Systems for the human/machine interface

Technical details
3.4 Trim types
1 Cover trim

2 End trim

Front panel recessed, screws concealed
B1/H1

B1/H1

B1/H1

B1/H1

17

17

6

6

6

3 Spacer trim

Mounting kit
for bolts:
M5: CP 6053.500
M4: CP 6058.500

Front panel flush
B1/H1

B1/H1

6

Mounting kit
for screw clamp:
CP 6053.200

max. 3.5

max. 3.5

6

variable

variable

max. 3.5

max. 3.5

6.5

6.5

6

Front panel recessed

Mounting kit
for holes:
M5: CP 6053.000
M4: CP 6058.000
M6: CP 6053.000 / 6058.000
+ EL 2092.200
+ screws M6 x 25

Mounting kits,
see page 233.

3.8 Rear cooling panel
1

1

2

1

1

3


 = Rear cooling panel section, unless otherwise specified the

4

50

11

cooling fins are arranged vertically

 = Width compensating panel, mounted in the center with an


5

even number of heat sinks, or on the right with an uneven
number.
By rotating the entire rear panel by 180°, this position may be
modified individually
= Spring nut M5, CP 6108.000 for interior installation on screw
channels

 = Overall depth of the enclosure is increased by 13 mm (0.51
)
 = Front panel width for determining the cooling modules and
compensating panel

Systems for the human/machine interface

35

Command Panel

VIP 6000

4.1 Keyboard housing
1 Installation depth 105 mm (4.13
)

Front frame
Wide

H1 x 0.87 + 123

H2
H4

30°

H5

(H

1+

(H

H1

1+

13

3)

12

)

(H

1–

8)

H1 x 0.5 + 138

B4 (B1 + 12)

Frame connector,
rigid/adjustable,
CP 6016.000

B1
X
CP 6058.XXX: M4
CP 6053.XXX: M5
(H

1+

(H

ins m ax
ta .
d e l l a ti o
p
1 0 th n
5
12
3

H6
H3

43

)

1+

61

)

B3 (B1 + 61)
B2 (B1 + 133)

Narrow

H1 x 0.87 + 74
B2 (B1 + 77)

Enclosure
duct connector

87

H2
(H
1+
H4
77
(H
1+
)
12
H
)
1
H5
(H
1–
8)

22

92

H1 x 0.5 + 138

30°
B1
X

CP 6058.XXX: M4
CP 6053.XXX: M5
(H

1+

(H

1+

ins m ax
ta .
d e l l a ti o
p
1 0 th n
5
12
6

H6
H3

43

)

61

)

Combined

H1 x 0.87 + 74
Enclosure
duct connector

87

H2
(H
1+
H4
77
(H
1+
)
12
H
)
1
H5
(H
1–
8)

22

B2 (B1 + 88)
92

H1 x 0.5 + 138

30°
B1

H6
H3

(H

1+

(H

1+

43

)

61

)

36

ins m ax
ta .
d e l l a ti o
p
1 0 th n
5
12
6

X

CP 6058.XXX: M4
CP 6053.XXX: M5

Systems for the human/machine interface

Technical details

2 Installation depth 44 mm (1.73
)

Front frame
Wide

H1 x 0.87 + 123
Frame connector,
rigid/adjustable

H2
H4

(H

1+

(H

1+

30°

H5

(H

1–

CP 6058.XXX: M4
CP 6053.XXX: M5

B1

H1

13

3)

12

)

8)

H1 x 0.5 + 97

B4 (B1 + 12)

X
H6
H3

B3 (B1 + 61)

(H

1+

(H

1+

43

)

56

In s m a x
ta .
d e l l a ti o
p
n
4 4 th

63

)

B2 (B1 + 133)

Narrow

H1 x 0.87 + 74

H2
(H
1+
H4
(H
77
1+
)
12
H
)
1
H5
(H
1–
8)

66

131

B4 (B1 + 12)

B1

CP 6058.XXX: M4
CP 6053.XXX: M5

X

30°
H6

H3

H1 x 0.5 + 86

Enclosure
bar connector

B1 – 27

19

B2 (B1 + 77)

(H

1+

(H

1+

43

)

56

In s m a x
ta .
d e l l a ti o
p
n
4 4 th

)

H1 x 0.87 + 74

H2
(H
1+
H4
(H
77
1+
)
12
H
)
1
H5
(H
1–
8)

131

66

B1 – 27

B1

B4 (B1 + 12)

CP 6058.XXX: M4
CP 6053.XXX: M5

X

30°
H6

H3

H1 x 0.5 + 86

Enclosure
bar connector

B2 (B1 + 88)

19

Combined

(H

(H

1+

1+

43

)

56

In s m a x
ta .
d e l l a ti o
p
n
4 4 th

)

Systems for the human/machine interface

Width dimensions:
B1 = Width of front panel
B2 = Overall width
B3 = Enclosure width
B4 = Clearance width between the
front frames
B6 = Width of rear panel
B7 = Distance between rear panel holes,
width

X = Cross-section of cable tube connection
68

33

Height dimensions:
H1 = Height of front panel
H2 = Overall height
H3 = Enclosure height
H4 = Clearance height between
the front frames
H5 = Clearance height between
enclosure sections
H6 = Height of rear panel
H7 = Distance between rear panel holes,
height

37

Command Panel

VIP 6000

Continued

4.1 Keyboard housing
3 Depth 27 mm (1.06
)

Front frame, wide,
with cable entry grommet
B4 (B1 + 12)

Frame connector,
rigid/adjustable

Ø 29

27

H1 x 0.5 + 80

30°

H2
(H
1+
H6
12
(H
1)
1+
H7
5
(H
1 + 4)
H4
21
(H
)
1+
12
)

B7 (B1 + 21)

H1 x 0.87 + 112

B6 (B1 + 54)
B2 (B1 + 133)

4 Depth 27 mm (1.06
)

Front frame, wide,
for cable tube, flexible
Frame connector,
rigid/adjustable

H1 x 0.5 + 80

30°

H2
(
H6 H1 +
12
(H
1)
1+
5
(H
1 + 4)
H4
21
(H
)
1+
12
)
H7

X
27

B4 (B1 + 12)

H1 x 0.87 + 112

B7 (B1 + 21)
B6 (B1 + 54)
B2 (B1 + 133)

38

Width dimensions:
B1 = Width of front panel
B2 = Overall width
B3 = Enclosure width
B4 = Clearance width between the
front frames
B6 = Width of rear panel
B7 = Distance between rear panel holes,
width

X = Cross-section of cable tube connection
68

33

Height dimensions:
H1 = Height of front panel
H2 = Overall height
H3 = Enclosure height
H4 = Clearance height between
the front frames
H5 = Clearance height between
enclosure sections
H6 = Height of rear panel
H7 = Distance between rear panel holes,
height

Systems for the human/machine interface

Technical details
4.4 Keyboard housing connector
Front frame narrow/combined
3 Enclosure
4 Enclosure
bar connector
duct connector
for keyboard
for keyboard
housing:
housing:
Installation depth
Installation depth
44 mm (1.73
)
105 mm (4.13
)

75
°

54

°

5°
13

49

frame
connector
for keyboard
housing:
Installation depth
105 mm (4.13
)
+ 44 mm (1.73
)

°
120

120°

5 Hinged

90

°
120

10

adjustable
for all keyboard housings

27

2 Frame connector,

10

Front frame, wide
1 Frame connector, rigid
for all keyboard housings

CP 6351.009
CP 6351.009

30°

Support for keyboards
10°

50°

Load specifications for installed equipment

F3

F2

F2

500 N

450 N

F1 = 500 N
(112.40 lbf)

F2

180 N
(150 N)

F1 = 500 N
(112.40 lbf)

320 N

F1 = 500 N
(112.40 lbf)
(470 N)
(105.66
lbf)

F5
50 N
(11.24 lbf)

F3
180 N
(150 N)

F2

F4

300 N

120 N

F1 = 600 N
(134.89 lbf)
(570 N)
(128.14 lbf)

F3
130 N
(100 N)

F5

F2

F2

F4

F2

F4

320 N

350 N

150 N
(120 N)

300 N

150 N
(120 N)

F1 = 500 N
(112.40 lbf)
(470 N)
(105.66 lbf)

F1 = 500 N
(112.40 lbf)
(470 N)
(105.66 lbf)

50 N
(11.24 lbf)

F3
130 N
(100 N)

F5

F5
50 N
(11.24 lbf)

F2

F4

F3

F2

F4

F3

F2

F4

300 N

120 N

180 N
(150 N)

300 N

120 N

130 N
(100 N)

300 N

120 N

F1 = 600 N
(134.89 lbf)
(570 N)
(128.14 lbf)

50 N
(11.24 lbf)

Permissible installed weight:
F1 = total, F2 = enclosure part (with support arm connection),
F3 = front part, F4 = rear part, F5 = keyboard housing
Systems for the human/machine interface

F1 = 500 N
(112.40 lbf)
(470 N)
(105.66 lbf)

F1 = 600 N
(134.89 lbf)
(570 N)
(128.14 lbf)

F5

F1 = 600 N
(134.89 lbf)
(570 N)
(128.14 lbf)

50 N
(11.24 lbf)

Figures in brackets are for the hinged version
(see 3.1 Command panels, page 23).
Enclosures for larger weights available on request.
39

Command Panel

VIP 6000

Optipanel for optimum . . .
. . . Interaction between monitoring and operation

Ideal for small operating units, in terms of both function and
design. You specify the dimensions of the selected operator
panel and your equipment; and we will custom-produce your
Command Panel/keyboard housing to your precise dimensions.
Neutral in color and stylish, it is an eye-catching feature in any
industrial environment.

40

Systems for the human/machine interface

42 – 57

Optipanel diversity

42 – 45

Optipanel selection

46 – 51

Optipanel standard sizes

52 – 53

Technical details

54 – 57

Order form

279

Rittal Optipanel – the Command Panel with a special touch.
Lightweight, slender and stylish in profile. The panel and installed
equipment determine the dimensions.
Do you have special requirements in terms of function, design and
ergonomics? The Optipanel will meet them. For example, also in
conjunction with the support arm systems CP-S and CP-L.

41

Command Panel

Optipanel

Enclosures with all the options
The stylish, customized solution.
● Three installation depths: 50 mm (1.97
), 100 mm (3.94
), 150 mm (5.91
).
● Hinged rear panels offer easy servicing.
● Every operator panel is assembled quickly and precisely.
● Two enclosures in standard sizes available off the shelf.

Installation depth 50 mm
(1.97
)

Installation depth 100 mm
(3.94
)

Installation depth 150 mm
(5.91
)

Enclosure in standard
dimensions
see page 52 – 53.

Any size to order
As well as the enclosure range with
standard dimensions, there is also a choice
of three different installation depths.
Determine the dimensions of your
envisaged operator panel, and you will
receive a dimensionally accurate enclosure
together with all the related installation
components.
The few criteria you need to determine can
be found under “Optipanel selection”
on page 46 – 51.

Every attachment point is accessible on all sides!
The retaining clips create sufficient play to accommodate
virtually all hole spacings (distance from the panel’s outer edge
7 – 13 mm (0.28
 – 0.51
)).
Screw-fastening the operator panel from the front is the simple,
ideal solution. Front panels with studs or screw clamps may
also be used.

42

Systems for the human/machine interface

Diversity: Enclosure, front design, rear panels

Individual front design

There's always a solution
The subdivison of the operating level with Rittal standard modules
fulfils your every requirement. Individual cutouts can be achieved,
for example, via the adaptor panel.
Should you have any queries, please contact your specialist Rittal
advisor. As we have said, there's always a solution!

Without subdivision

With cross member
or sealing bar

With two cross
members or sealing
bars; combinations
are also possible

With cross member
or sealing bar
horizontal/vertical
combined

With spacing and
built-in trim panel.
It may be positioned at the top,
bottom or side.

Adaptor plate
with individual
cutouts

Rear panels to order

Effective heat dissipation
Dissipatable heat loss*

Installation
depth:
150 mm
(5.91
)

+
19
/
7U

Cooling
rear panel,
modular

60 W

66 W

Without fins

Choose the rear panel
according to your servicing
requirements:
● screw fastened
● hinged with cam lock and
double-bit insert
● hinged with quick-release
fasteners

Systems for the human/machine interface

The modular rear cooling
panel significantly increases
dissipation of the heat loss from
the enclosure! This is achieved
thanks to a combination of
cooling fins on the outside and
screw channels on the inside,
which ensure optimum heat
absorption and dissipation.

* Pv (W) at ∆T = 20 K

Optipanel selection,
see page 46 – 51.
Order form,
see page 279.

43

Command Panel

Optipanel

For optimum ergonomic
conditions
● Keyboard housings in two different installation depths
and support for keyboards.
● Support arm systems swivel, rotate, raise and lower the
operating unit at any given point.
● Stationary and mobile floor-standing systems.
● Handle sets for easier handling.

The matching keyboard
housing
Choose the most suitable keyboard housing, tailored to your requirements. Two
installation depths are available. The keyboard housing with an installation depth of
50 or 100 mm (1.97
 or 3.94
) and the keyboard support may be attached directly to
the command panel or to the enclosure
door.
Installation depth 50 mm (1.97
)

Installation depth 100 mm (3.94
)

Support for keyboards attached
to the enclosure

Support for keyboards attached
to the enclosure door

Installation depth 100 mm,
(3.94
) attached to the
enclosure door

Always within reach
Tailored precisely to the operator's
requirements, various handle sets may be
fitted in accordance with ergonomic
requirements. “Moving” the enclosure
becomes effortless.

44

Systems for the human/machine interface

Diversity: Keyboard housing and ergonomics

Precisely the right position
Different viewing angles of the machine,
whether the operating staff are tall or short,
sitting or standing – with Rittal support arm
systems, the Optipanel is always in the
optimum position.
All system components for rotating, tilting,
swivelling, raising and lowering are combined with one another with unbelievable
diversity.
Depending on the system configuration,
arm length and enclosure weight, support
arm systems CP-S or CP-L are used. If you
want both a high load capacity and elegance, system combinations offer the ideal
solution.

The connection fits
Even in enclosures with a very shallow
installation depth, the support arm systems
may be attached to the rear via an adaptor.

Stationary
or mobile
Floor-standing
systems in a variety of
designs – even heightadjustable – round out
the application diversity of the Optipanel.

Optipanel selection,
see page 46 – 51.
CP pedestal, heightadjustable

Systems for the human/machine interface

Mobile pedestal

Pedestal base plate

Order form,
see page 279.

45

Command Panel

Optipanel

Optipanel
Selection: Operating housing / keyboard housing

It’s so easy!
We need the following three pieces of
information in order to deal with your
enquiry/order:
● Part No.: CP 6382.009
● The dimensions and number of panels/
front panels to be installed in the
keyboard/operating housing
● Design code number
Order form, see page 279

Operating/keyboard housing
Part No. CP

6 3 8 2 . 0 0 9
Material:
Enclosure: Extruded aluminum section
Corner pieces: Die-cast zinc
Corner protectors:
Plastic, self-extinguishing
Sealing trim: Flexible plastic section

Finish:
Enclosure: Natural anodized
Corner pieces: Powder coated in finely
textured RAL 7035
Corner protectors and sealing trims:
Dyed similar to RAL 7024

For larger orders, other colors similar to
RAL
● 5018 (turquoise)
● 5005 (bright blue)
● 3001 (bright red)
● 7030 (stone grey)
are available.
Protection ratings:
IP 65 to EN 60 529/10.91
(with appropriate front panel installation).
Complies with NEMA Type 12.

46

Systems for the human/machine interface

Selection: Operating housing
1. Panel dimensions
1.1 For operating housings
Please state the number of front panels/panels used, their height
(H) x width (W) x depth (D) and the manufacturer/model (see
below) on the order form.

Checking the
installation criteria

1.2 For keyboard housings
Please state the height (H) x width (W) x depth (D) of the
keyboard(s)/panel(s) and the manufacturer/model on the order
form. (see criteria).

1 7 to 13 mm (0.28
 to 0.51
)

2

3

4

H

3

1

W

2

T = Depth
B = Width

3

7 – 13

5
R 32
62

62

min. 17

min. 6

7 – 13

H

5

4
2

29

With the following installation
criteria, please check whether
your operator panels may be
installed directly into the
Optipanel.
Otherwise, an adaptor panel is
needed – cf. 2.2, design code
number 2.
The dimensions of the
operating housing and
keyboard housing are derived
from the dimensions of your
panel and the number of cross
members.

edge spacing
of the mounting hole or bolt.
Front panel projection
on sides with mounting
holes and bolts at least
17 mm (0.67
), on sides
without mountings at least 6
mm (0.24
).
Front panels up to 5 mm
(0.20
).
With a thickness of
approximately 3.5 mm
(0.14
) the front panel is
flush with the sealing trim
and the enclosure front.
Installation depths:
Operating housing =
50 mm (1.97
), 100 mm
(3.94
), 150 mm (5.91
).
Keyboard housing =
50 mm (1.97
), 100 mm
(3.94
).
For versions with a hinged
rear panel and cam lock,
the maximum installation
depth is reduced by 25 mm
(0.98
) in the vicinity of the
lock.

T

B

2.1 Installation depth
Technical details,
see page 54.

50 mm (1.97
)
2.1 2.2 2.3 2.4 2.5

Systems for the human/machine interface

2.1
1

100 mm (3.94
)

2.1
2

150 mm (5.91
)

2.1
3

47

Command Panel

Optipanel

Optipanel
Selection: Operating housing
2.2 Front design
Additional parts
Mounting kit for installing front
panels, operating panels and
keyboards in operating housing
and keyboard housings, see
page 233.
Technical details,
see page 55.
1) Quantity needed for sealing
the individual separation
points.
Example: 3 front panels in
operating housing = 2 separation points = 2 cross members/
sealing bars included in the
configuration. Other combinations available on request.

Without cross member

2.2
0

With cross member1)
For horizontal and/or
vertical division of the
operating housing front.
With mounting channel
on both sides to
accommodate mounting
kits, see page 233.

2.2
1

Screw-fastened from the
inside, with cam or l/h hinge on
request.

Material thickness:
3 mm aluminum,
natural anodized

2.2
2

Please specify the
dimensions for the front
panel and the desired
holes and cutouts.

Material:
Extruded aluminum
section, natural anodized

2)

With an adaptor plate
(to specifications)

3) Technical details,
see page 234.

With spacing and builtin trim panel3) at the top
For additional space for
cable entry and for
installing switches/
indicator lights,
emergency off/key
switches, CD-ROM/disk
drives, interfaces etc.

2.2
3

Material:
Extruded aluminum
section, natural anodized

With spacing and builtin trim panel3), at the
bottom
For additional space for
cable entry and for
installing switches/
indicator lights,
emergency off/key
switches, CD-ROM/disk
drives, interfaces etc.
Material:
Extruded aluminum
section, natural anodized

2.2
4

With sealing bar1)
For horizontal and/or
vertical division of the
operating housing front.
The “slot-free” division
produces a height gain of
22 mm (0.87
).

2.2
5

Material:
Extruded aluminum
section 8 x 20 mm
(0.31
 x 0.79
), natural
anodized

With front panel hinged2) 2.2
For example, if a disk
drive built into the operator 6
panel requires this free
access, see page 233.
Standard design:
● Screw-fastened from the
outside
● R/h hinge
2.1 2.2 2.3 2.4 2.5

48

Material:
Front panel: Aluminum, 3 mm
(0.12
), natural anodized.
Extruded aluminum section:
Natural anodized

Systems for the human/machine interface

Selection: Operating housing
2.3 Support arm and
pedestal connection
Accessories:
Support arm components for
connection of the Optipanel to
the support arm system CP-L,
see page 96 – 115.
Pedestals,
see page 132 – 147.
Pillar,
see page 148 – 149.
Technical details,
see page 55.

Without
connection

2.3
0

Connection at
top1)

2.3
1

Connection at
bottom1)

2.3
2

Connection top
and bottom2)

2.3
3

CP-L, rectangular
for enclosure coupling CP 6525.1X0,
enclosure attachment CP 6525.6X0
only applies to installation depth 100 mm (3.94
),
150 mm (5.91
)

1) For

support arm system
CP-S, steel, for installation
depth 50 mm (1.97
), 100 mm
(3.94
), 150 mm (5.91
) please
enter S after the design code
number.
2) Including a cover plate for
sealing the unused section.
3) Unless otherwise specified,
will be supplied in RAL 7030

Connection at top

2.3
4

Connection at bottom

2.3
5

Connection top and
bottom2)

2.3
6

CP-L, round
for enclosure coupling CP 6525.0X0,
enclosure attachment CP 6525.5X0,
angle coupling CP 6526.0X0
only applies to installation depth 150 mm (5.91
)

Note:
Wall mounting possible:
hinged with CP 6016.200,
see page 226.

2.1 2.2 2.3 2.4 2.5

Systems for the human/machine interface

Connection at rear, top3)

2.3
7

Connection at rear,
bottom3)

2.3
8

CP-L, rectangular
for enclosure coupling CP 6525.1X0,
enclosure attachment CP 6525.6X0 and
enclosure attachment, tilting CP 6902.640 / .670

49

Command Panel

Optipanel

Optipanel
Selection: Operating housing
2.4 Rear panels

Rear panel screwfastened

2.4
1

Rear panel hinged on
the longest edge.
Viewed from the rear,
hinged on the right or at
the bottom 1) 2) 3) 4).

2.4
2

Example of the versatility of
the enclosure:
Mounting on doors
With all operating housing/
keyboard housings, the rear
panel may be supplied
prepared for external mounting
on flat surfaces on request.
Additional parts
Enclosure duct connector
CP 6006.000, see page 226.
For mounting and cable entry.
Cross-brace for door
TS 8800.960 / TS 8800.980,
for mounting on 600/800 mm
(23.62
/31.50
) wide doors
TS/ES.

Rear cooling panel,
2.4
modular
Significantly increases the 3
dissipation of heat loss
from the enclosure.

Rear panel hinged
with quick-release
fasteners1)

2.4
4

Material:
Extruded aluminum
section
Note:
When installing the
pull-out keyboard
CP 6002.100 (see page
263) in an Optipanel,
design version 2.1,
no. 3 the 11 mm (0.43
)
cooling fins and screw
channels protruding into
the enclosure may be
milled off – please specify
when ordering.
Technical details,
see page 204.
2.1 2.2 2.3 2.4 2.5

Note:
1) With a support arm connection at the rear, only possible on the
side opposite the support arm connection.
2) Not for operating housing with an installation depth of 50 mm
(1.97
) with keyboard housing.
3) Standard double-bit lock insert may be exchanged for lock
inserts 41 mm (1.61
), version C, see page 246,
Plastic handles and T handles, version C,
see page 245 – 246.
4) With a hinged rear panel, the maximum installation depth in the
vicinity of the lock is reduced by 25 mm (0.98
) (see page 47 ).

50

Systems for the human/machine interface

Selection: Operating housing / keyboard housing
2.5 Keyboard
housing
Width independent of operating
housing.
The swivel bracket is infinitely
adjustable from 80° to 155°.
Additional parts
1)

Mounting kit for installing
front panels, operating panels
and keyboards in operating
housings and keyboard
housings,
see page 233.

Without keyboard
housing

2.5
0

With keyboard housing
Installation depth
50 mm (1.97
) 1)

2.5
1

With keyboard housing
Installation depth
100 mm (3.94
)1)

2.5
2

With support for
keyboards

2.5
3

Technical details,
see page 56 – 57.

2.1 2.2 2.3 2.4 2.5

Examples
The picture opposite shows the solution we
have chosen, together with its
corresponding design code number. The
following key explains how the code
number in our example is made up.

Operating/keyboard housing
Part No.: CP 6382.009
Design code number:

We need the following three pieces of
information in order to deal with your
enquiry/order:
● Part No.: CP 6382.009
● The dimensions and number of panels/
front panels to be installed in the
keyboard/operating housing
● Design code number
Order form, see page 279.
2.1

2.4

2

1

2.1 2.2 2.3 2.4 2.5
2 1 2 1 1
2.2
2.1 2

Operating housing,
Installation depth 100 mm (3.94
)

2.2 1

With cross member

2.3 2

Support arm connection CP-L,
rectangular, bottom

2.4 1

Rear panel, screw-fastened

2.5 1

With keyboard housing,
Installation depth 50 mm (1.97
)

1

2.3
2

2.5
1

Systems for the human/machine interface

51

Command Panel

Optipanel

H5

H1

H3

H3

H5

max.
Installation depth
50 mm
(1.97
)

max.
Installation
depth 100 mm
(3.94
)

H2

H6

H4

B1

B6
Only for
CP 6380.100

45°

Ø 6.6

Ø

45

Ø6

B4
53

5

CP 6380.100

B2

B5

CP 6380.000

Prepared for CP-L, rectangular

Support arm connection CP-L, rectangular
for CP 6380.000

110

43

52

CP 6380.000
B3

14

43

95

B5
CP 6380.100
37

60

B3

B = Width

Two basic sizes available off the shelf
For direct installation of panels/front panels
with H/B 7U x 482.6 mm (19
) and for
smaller compact panels/front panels
H/B 234 x 270 mm (9.21
 x 10.62
) mm
Rittal offers these two Optipanel command
panels off the shelf.

Optipanel
Part No. CP
to fit front panel H1 x B11)

PU
1

see page
6380.000

6380.100

310.3 mm (7U) x
482.6 mm (19")

234 x 270 mm
(6.21" x 10.63")

Max. installation depth

100 (3.94)

50 (1.97)

B2 = Overall width

527 (20.75)

314 (12.36)

B3 = Clearance width between enclosure sections

494 (19.45)

281 (11.06)

B4 = Clearance width between the retaining clips of the mounting kit

450 (17.72)

237 (9.33)

B5 = Width of rear panel

519 (20.43)

306 (12.04)

B6 = Clearance width for assembly

475 (18.70)

262 (10.31)

H2 = Overall height

354 (13.94)

278 (10.94)

H3 = Clearance height between enclosure sections

321 (12.64)

245 (9.65)

H4 = Clearance height between the retaining clips of the mounting kit

277 (10.91)

201 (7.91)

H5 = Height of rear panel

346 (13.62)

270 (10.63)

H6 = Clearance height for assembly

302 (11.89)

226 (8.90)

Hinging of rear panel

bottom/top

right

CP-L, rectangular,
bottom/top

CP-S2)
Rear panel

6.2 (13.67)

2.8 (6.17)

Support arm connection
Weight kg (lbs)

80

Lock systems
Standard double-bit lock insert may be exchanged for 41 mm (1.61
) lock inserts, type C, see page 246,
Plastic handles and T handles, Version C, see page 245 – 246.
1) Installation criteria
2) Additional marked

required for direct mounting of the panels, see page 47.
points for drilling holes, for the external mounting of:
Enclosure attachment, tilting,
Support arm system CP-L, rectangular,
Assembly components with hole pattern to VESA 75,
see page 80/81.

52

Systems for the human/machine interface

Standard dimensions for front panel 482.6 mm (19
) x 7 U / 270 x 234 mm (10.63
 x 9.21
)

German registered design
No. 4 00 02 955

Accessories:
For connecting to the support
arm system or surfaces,
see page 80/81.

Material:
Enclosure:
Extruded aluminum section
Corner pieces:
Die-cast zinc
Corner protectors:
Plastic, self-extinguishing
Sealing trim:
Flexible plastic section
Finish:
Enclosure:
Natural, anodized
Corner pieces:
Powder coated in finely
textured RAL 7035
Corner protectors and sealing
trims:
Dyed similar to RAL 7024
Protection ratings:
IP 65 to EN 60 529/10.91
(with appropriate front panel
installation).
Complies with NEMA Type 12

Mounting kit
For the installation of front
panels, command panels and
keyboards.
Part No. see page 233.

Systems for the human/machine interface

Spring nut M5
For inserting into the channels
of the Optipanel.
Part No. see page 255.

Enclosure attachment,
tilting, base
for attaching to worktops.
Part No. see page 110.

53

Command Panel

Optipanel

2.1 Installation depth

When preparing for rear support arm connection

H5 (H1 + 36)

max. installation depth
100 mm (3.94
)

When preparing
for keyboard housings

max.
installation depth
150 mm (5.91
)

10

Hinge

10

10

H3 (H1 – 8)

Hinge

B3 (B1 – 8)
B2 (B1 + 44)

1 50 mm (1.97
)

max. installation depth
50 mm (1.97
)

H4 (H1 – 33)

B4 (B1 – 33)

H3 (H1 – 8)

H1

B3 (B1 – 8)

H2 (H1 + 44)

90

H6 (H1 + 11)

max. installation depth
41 mm (1.61
)

B1

148

H6 (H1 + 11)

88

31.5

132

Hinge

Cable tube

Cable tube

When preparing
for keyboard housings

When preparing
for keyboard housings

When preparing
for rear support
arm connection

130

40

95

60

B6 (B1 + 11)

110

B6 (B1 + 11)

Preparation for CP-L, rectangular

43

52

2 100 mm (3.94
)

Channel for inserting the spring nuts M5

67

Preparation for CP-L, round

B6 (B1 + 11)

160

50

57

3 150 mm (5.91
)

Channels for inserting the spring nuts M5

Width dimensions:
B1 = Width of front panel
B2 = Overall width
B3 = Clearance width between enclosure
sections
B4 = Clearance width between the retaining clips
of the mounting kit
B5 = Width of rear panel (B1 + 36)
B6 = Clearance width for assembly

54

Height dimensions:
H1 = Height of front panel
H2 = Overall height
H3 = Clearance height between enclosure
sections
H4 = Clearance height between the retaining
clips of the mounting kit
H5 = Height of rear panel
H6 = Clearance height for assembly

Systems for the human/machine interface

Technical details
2.2 Front design
Front panel from the inside,
screw fastened

Front panel from the
outside, screw fastened

Cross member

Sealing bar
Front panel 1

B1/H1

B1/H1
B1/H1

6

H1 top

B1/H1

20

30

22

max. 5

max. 5

Sealing bar
CP 6015.500

H1 bottom

6

max. 5

Front panel 2

2.3 Support arm and pedestal connection
CP-L, rectangular
For installation depths 100/150 mm
(3.94
/5.91
)

7

CP-S
For installation depths 100/150 mm
(3.94
/5.91
)

CP-L, round
For installation depth 150 mm
(5.91
)

7

95

25°
40

14

43

Ø 82

45
Ø4
5° 45°

30

45°

Ø 65

5

R3
38

13.5

External mounting of support arm
connections,
see page 84/85.

External mounting of support arm
connections,
see page 98/99.

External mounting of support arm
connections,
see page 98/99.

2.4 Rear cooling panel
1

1

2

1

1

3

4

1

50

11

2

3

4
5

= Section of rear cooling panel
= Width compensating panel
for optimum adaptation to the enclosure
= Spring nut M5, CP 6108.000 for interior installation on screw
channels
= Overall depth of the enclosure is increased by 13 mm (0.51
)
= Front panel width for determining the cooling modules and
compensating panel

5

Systems for the human/machine interface

55

Command Panel

Optipanel

2.5 Keyboard housing
1 Installation depth 50 mm (1.97
)

58 + 0.87 x H1*

B2 (B1 + 44)
B3 (B1 – 8)

10

B4 (B1 – 33)

H6
(H1
+

B1

11)

60

B3 (B1 – 8)

78 + 0.5 x H1*

H2
H1
(H
1+
H3
44
(H
)
1–
H4
(H 8)
1–
33
)

Max. installation
depth 50 mm (1.97
)

CP 6053.XXX: M5
CP 6058.XXX: M4

* applies to a tilting angle of 30 ° to the horizontal
2 Installation depth 100 mm (3.94
)

83 + 0.87 x H1*

B2 (B1 + 44)
H2
H1
(H
1+
H3
44
)
(H
H4 1 –
8)
(H
1–
33
)

10
B4 (B1 – 33)
H6
(H1
+

11)

52

121 + 0.5 x H1*

B1
B3 (B1 – 8)

H5

(H

1+

36

)

CP 6053.XXX: M5
CP 6058.XXX: M4

ma
x.
i
1 0 ti o n d n s t a
0 m e lla
m p th (3.
94 

11
)
0

B3 (B1 – 8)

* applies to a tilting angle of 30 ° to the horizontal

3 Support for keyboards
473.5
123

45

71

87

33

43

210

31.5
1

290

68

31.5

19

473

477
1 = Prepared for mouse pad support SM 2383.020

33

Cross-section of cable tube connection

68

Width dimensions:
B1 = Width of front panel
B2 = Overall width
B3 = Clearance width between enclosure
sections
B4 = Clearance width between the retaining
clips of the mounting kit
B5 = Width of rear panel (B1 + 36)
B6 = Clearance width for assembly

56

Height dimensions:
H1 = Height of front panel
H2 = Overall height
H3 = Clearance height between enclosure
sections
H4 = Clearance height between the retaining
clips of the mounting kit
H5 = Height of rear panel
H6 = Clearance height for assembly

Systems for the human/machine interface

Technical details
Keyboard housing connection
1 2 Frame hinge connector
with Optipanel keyboard housing

3 Frame hinge connector
with support for keyboards

m
°
40
.1
ax °
0
°
12 . 80
in
m

m
ax
°
55

in

0°

.1

m

12

.8
0°

50°

10°

Tilting angle infinitely ajustable from 80° to 155°.

Tilting angle infinitely ajustable from 80° to 140°.

Minimum front panel width (B1):
Depending on the
● Installation depth of the operating housing
● With or without keyboard housing
● Position of the support arm connection

2.5 Keyboard housing
(see page 51)
0 without

2.3 Position of the support arm
connection
(see page 49)
0 to 8
top, bottom or rear
1 4 7 8

1 and 2 with

Installation depth of operating housing
(see 2.1, page 47)
50 mm (1.97
)
100 mm (3.94
) 150 mm (5.91
)
Minimum front panel width mm (inches)
160 (6.30)
(265 (10.43))

150 (5.91)

150 (5.91)

378 (14.88)*

339 (13.35)*

339 (13.35)*

top or rear
2 3 5 6

bottom
( ) Figures in brackets:
Only with the hinged rear panel combination (see page 50, 2.4)
version 2 and 4 with connection at rear (see page 49, 2.3) design 7 and 8 .

* Smaller front panel widths for asymmetrical support arm connection available on request.

Systems for the human/machine interface

57

Command Panel

Optipanel

7

7

H3

H4

Mounting cutouts:
CP-S

45°

25°

Ø 65

45
Ø4
5°

45°

H1

H2

13.5

CP-L, rectangular

40

55

20

Ø7

50
95
Alternative
max. ∅ 55

1.5

100

B2

T1

B1

39

A

Grooves for
spring nuts M5

B4
A = max. installation depth 69 mm (2.72
)

B3

Compact Panel
For small operating units built into front
panels. The front panel is inserted from the
rear and secured with screw clamps. Front
panels with a material thickness of between
2 and 6 mm (0.08
 and 0.24
) are possible.
Rear panel hinged on the left or right; by
rotating the enclosure, the rear panel may
also be used as a hinged front panel.
Protection ratings:
IP 65 to EN 60 529/10.91
Complies with NEMA Type 12

Configuration
Enclosure

Version

Material

1 roof tray

Solid

Aluminum

1 base tray
1 rear wall
2 side parts

With or w/o support arm
connection, depending on
Part No. – see table
Screw-fastened via roof and
base tray
With channels for M5 spring
nuts

Screw cover
Including seal and screw clamp.

Height (H1) in mm (inches)

PU

Width (B1) in mm (inches)
Depth (T1) in mm (inches)

Surface finish/
color
Powder coated in
RAL 7024

Aluminum

Powder coated in
RAL 7024

Aluminum

Natural anodized

Extruded
Powder coated in
aluminum section RAL 7024
Plastic
Sim. to RAL 7024

238 (12.40)

388 (9.49)

521 (20.51)

238 (12.40)

388 (9.49)

241(9.49)

241(9.49)

241(9.49)

315 (12.40)

315 (12.40)

87 (3.43)

87 (3.43)

87 (3.43)

87 (3.43)

87 (3.43)

1

6340.000

6340.100

6340.200

6340.300

6340.400

Part No. CP (with support arm connection CP-L, rectangular)

1

6340.010*

6340.110*

6340.210*

6340.310*

6340.410*

Part No. CP (without support arm connection)

1

6340.020*

6340.120*

6340.220*

6340.320*

6340.420*

B2 = Enclosure clearance width

170 (6.69)

170 (6.69)

170 (6.69)

244 (9.61)

244 (9.61)

B3 = Front panel width

178 (7.01)

178 (7.01)

178/4 U (7.01)

252 (9.92)

252 (9.92)

B4 = Clearance width between screw clamps

164 (6.46)

164 (6.46)

164 (6.46)

238 (9.37)

238 (9.37)

H2 = Enclosure clearance height

192 (7.55)

342 (13.46)

475 (18.70)

192 (7.55)

342 (13.46)

H3 = Front panel height

200 (7.87)

350 (13.78)

482,6/19


200 (7.87)

350 (13.78)

H4 = Clearance height between screw clamps

186 (7.32)

336 (13.23)

469 (18.46)

186 (7.32)

336 (13.23)

Weight kg (lbs)

2.3 (5.07)

3.2 (7.05)

3.9 (8.60)

2.8 (6.17)

3.8 (8.38)

6028.500

6028.510

6028.520

6028.530

6028.540

Part No. CP (with support arm connection CP-S)

Accessories
Front panel, 3.0 mm aluminum, natural anodized
Wall mounting bracket, vertically hinged

1
1 set

6341.000

Cover plate for support arm connection CP-S

1

6505.200

Spring nut M5

50

6108.000

* Extended delivery times
Order numbers for other heights with front panel width (B3):
– 178 mm (7.01
) – Part No.: CP 6342.109
– 252 mm (9.92
) – Part No.: CP 6342.209
Please specify the front panel height (H3) as well. Extended delivery times.

58

Systems for the human/machine interface

Rittal Service:
● Other RAL colors
● Drilled holes and cutouts in
the roof and base tray

Accessories:
see page 200 – 201
or see index.

Wall mounting bracket,
vertically hinged, for direct
mounting of the Compact Panel
on surfaces.
Part No. see page 227.
Systems for the human/machine interface

59

Command Panel

Compact Panel

First-class in terms of design, sealing,
protection and hygiene
These are the outstanding features of the Premium Panel made
from stainless steel. Simply ideal for use in the food and hygiene
sector. Outstanding performance at a low price.

IP 69 K
● Resistant to high-pressure cleaning
The new gap-free sealing concept
facilitates the high protection category of
IP 69K. The sealing gasket lies between
two surfaces and is ideally compressed
by the all-round screw fastening.

Easy to clean, external sealing gasket.

● Suitable for clean room use
The fact that it is suitable for clean room
use makes it capable of meeting the
highest standards in the food and
hygiene sector (certified by the
Fraunhofer-Institut IPA).
This is achieved thanks to the unique
screw-fastening of the rear panel
(screws on the inside with plastic
stoppers or hex screws on the outside)
and the bracket on the inside, which is
clearly superior to exterior hinges when it
comes to hygiene.

Duct connector between the operating and
keyboard housing for cable routing.

● Restricted breathing
Short-term protection against an
explosive atmosphere.

● Optimum EMC conditions
Because the sealing surfaces of the rear
panel and the enclosure are directly in
contact with one another, exceptional RF
shielding of the Premium Panel is
achieved.
Premium Panel

● Easy to use
Practical cable routing via two duct
connectors between the enclosures.

PU
1

Part No. CP

with keyboard housing
6680.000

Command Panel
for installation panel H x W

Keyboard
housing
Keyboard
housing

6681.000

–

215 (8.46)

115 (4.53)

215 (8.46)

–

–

530 (20.87)

530 (20.87)

460 (18.11)

360 (14.17)

Keyboard
housing

200 (7.87)

Command Panel

–

120 (4.72)

Keyboard
housing

220 (8.66)

120 (4.72)

63/80 (2.48/3.15)

Support arm connection

top

6681.100

310 mm (12.20
) (7 U) x
482.6 mm (19
)

front 58 (2.28)
rear 63 (2.48)

Command Panel

Depth mm (inches)

6680.110

177 mm (6.97
) (4 U) x 482.6 mm (19
)
115 (4.53)

Width mm (inches)
Height mm (inches)

without keyboard housing

6680.100

356 mm (14.01
) (8 U) x 482.6 mm (19
)

Command Panel
Installation depth

6680.010

bottom

220 (8.66)
–

top

bottom

top, bottom by rotating
of the enclosure

Accessories
CP holder

2

6682.000

To order the Premium Panel in Type 304 (Type 316L) use Part No. CP 665X.XXX. Delivery times available on request.

60

Systems for the human/machine interface

Stainless steel

Rittal Service:

Accessories:

Other sizes and other
enclosures with this sealing
concept are available on
request.
Cutouts and drilled holes to
your specifications.

see page 200 – 201
or see index.

The holder holds the rear
panel in an open position.

Support arm system CP-S,
stainless steel
Selection see page 92 – 95.

Material:
Type 304 stainless steel
Finish:
Brushed, 180 grain,
polished with 280 grain
Protection ratings:
IP 69K to DIN 40 050-9/5.93
Technical details,
see page 62.

Part No. CP 6682.000

Systems for the human/machine interface

61

Command Panel

Premium Panel

Operating and keyboard housing
220 (120)

220 (120)
530

193 (93)
1

100 (50)

100 (50)

42.5

194.5 (94.5)

483

25

375

359

460

460

380.8

365.8

460

382.3

Welded stud
M6 x 20 (0.77) (4 x)
Dimensions in
brackets for
CP 6680.010

60

62.5

80

42.5

Grounding bolts
M6 x 15 (0.59) (1 x)

94.5
(62.5)

200

2

77.5

15°

40

375

100
Welded studs M6 x 20 (0.77) (4 x)

65

1 = Support arm connection CP-S, stainless steel, top
only for CP 6680.000, CP 6680.100
2 = Support arm connection CP-S, stainless steel, bottom
only for CP 6680.010, CP 6680.110

19.5

Grounding bolts
M6 x 15 (0.59) (1 x)

498

Busbar connection adaptor only with version .010

Keyboard housing
192

25

63

530

50
35.9

80

152

62.5

5°

174.5
17.5

153
60

200

300

45

50

45

Grounding bolts
M6 x 15 (0.59)

Top view – Depth 120 mm (4.72
)

Top view – Depth 220 mm (8.66
)

467

62

40
R4

R 40

5

367

Systems for the human/machine interface

Stainless steel, technical details
Command Panel

42.5

220 (120)
530

100
(50)

Welded stud
M6 x 20 (0.77) (4 x)

Grounding bolts
M6 x 15 (0.59) (1 x)

42.5

360

313

25

40

375
Welded studs M6 x 20 (4 x)

Top view

218.5
(118.5)

49

100
(50)

5.

5

193 (93)

40

483

498

Support arm connection
CP-S, stainless steel, at
the bottom by rotating the
enclosure.
Dimensions in brackets
for CP 6681.000

Rear panel screw fastened with hex screw,
external

Systems for the human/machine interface

Rear panel screw fastened with internal screw
with plastic stoppers

63

Command Panel

Premium Panel

Rittal operating housings . . .
. . . “Standard solutions”

Command Panel housing with door, with
handle grips
● Door 40 mm (1.57
) deep, l/h hinge,
side handle grips made from aluminum
with plastic cover caps
● Support arm connection with
reinforcement plate at the top/bottom by
rotating the enclosure
● Enclosure sealed all round,
Double-bit lock insert in the right-hand
side

Operating housing with display panel
front
● Door rear, r/h hinge, with double-bit lock
insert
● With side mounting sections for
individual interior installation
● Enclosure sealed all-round, with cutout
and fitted operating panel at the front
(easily machinable 3 mm aluminum front
panel with frame), r/h hinge, screwfastened from the inside

Command Panel housing with door,
stainless steel
● Door 40 mm (1.57
) deep, l/h hinge, side
handle gripshandle grips made from
food-safe plastic
● Support arm connection with
reinforcement plate at the top/bottom by
rotating the enclosure
● Enclosure sealed all round,
Double-bit lock insert in the right-hand
side

Command Panel, with handle grips
● Door rear, r/h hinge, with double-bit lock
insert
● Support arm connection with
reinforcement plate at the top/bottom by
rotating the enclosure
● With side mounting sections for
individual interior installation
● Enclosure sealed all-round, with cutout
and fitted, easily machined 3 mm (0.12
)
aluminum front panel at the front with
side handle grips made from aluminum
and plastic cover caps

Command Panel with wide VIP 6000
frame
● Door rear, r/h hinge, with double-bit lock
insert
● Support arm connection with
reinforcement plate
● With side mounting sections for
individual interior installation
● Enclosure sealed all-round with cutout at
the front for 3 mm (0.12
) aluminum front
panel with VIP 6000 front frame (supplied
loose)

Command Panel, stainless steel
● Front panel screw-fastened all round,
with projection to protect the installed
equipment
● Support arm connection with
reinforcement plate at the top/bottom by
rotating the enclosure
● Enclosure sealed all round, rear panel
may also be used as a mounting surface

Approvals

Command Panel
Command Panel
Command
Command Panel Command Panel
housing with
housing with Command Panel
Panel,
with wide
with display
door,
door with
with handle grips
stainless steel
VIP 6000 frame
panel front
stainless steel
handle grips
●

UL
UL – Underwriters
Laboratories Inc.
For USA and Canada

●

●

●

●

●

CSA

●

●

●

TÜV

●

●

●

Norske Veritas

●

Lloyds Register of
Shipping
VDE
Bureau Veritas

64

●

●

●

●

●

●

●

●
●
Systems for the human/machine interface

66 – 73

Command Panel housing with door, with handle grips

66 – 67

Command Panel, with handle grips

68 – 69

Operating housing with display panel front

70 – 71

Command Panel with wide VIP 6000 frame

72 – 73

Command Panel, stainless steel

74 – 77

Stainless steel Command Panel housing with door

74 – 75

Stainless steel Command Panel

76 – 77

Modern, flexible production technology demands solutions which
precisely meet the required standards of ergonomics, userfriendliness, hygiene or corrosion protection at the operating
interface. The Rittal Command Panel range is tailored to these
requirements. Supplemented by a support arm or pedestal system,
system accessories or system climate control, an enclosure
becomes a complete solution. All achieved quickly and practically
on your behalf.

65

Command Panel

Command Panel, sheet steel

Profile strip

For
Command
Panel housing
with door
CP 6534.000
CP 6535.000
CP 6537.000
CP 6536.000
CP 6538.000

● Protects the edges of the Command
Panel or membrane against damage.
● Provides space for panel labelling.
For labels:
Width: Enclosure width – 45 mm (1.77
)
Height: 17 mm (0.69
)
Thickness: 0.4 mm (0.02
)
Configuration:
2 aluminum strips, including clear cover
strips and 4 cover caps.

Width
Color
mm
RAL
(inches)

Part No.
CP

300
(11.81)

5018

6542.000

400
(15.75)

5018

6543.000

T1 = 180
135

40

H2

H1

H5

30

H3

H4

1

B5

198 – 203
1 Welded nut M8 for the
attachment of mounting panels
or support rails

B1

Support arm
connection
top
bottom

82

Door hinge

15

168
30

100

Ø

7

Ø 70

Ø

67

Configuration:
Enclosure with cutout and reinforcement for
support arm system CP-L2), round, with seal.
Door with sealing frame, side handle grips
and end caps.

75

B4

B7
B6

left
right

B3
B2

Height in mm (inches) (H1)

200 (7.87)

300 (11.81)

400 (15.75)

300 (11.81)

400 (15.75)

500 (19.69)

300 (11.81)

300 (11.81)

300 (11.81)

400 (15.75)

400 (15.75)

500 (19.69)

180 (7.09)

180 (7.09)

180 (7.09)

180 (7.09)

180 (7.09)

180 (7.09)

6534.000

6535.000

6537.000

6536.000

6538.000

6544.000

B2 = Enclosure width with handle grips

338 (13.31)

338 (13.31)

338 (13.31)

438 (17.24)

438 (17.24)

538 (21.18)

B3 = Clearance opening, front

258 (10.15)

258 (10.15)

258 (10.15)

358 (14.09)

358 (14.09)

458 (14.09)

B4 = Spacing of mounting panel attachment

260 (10.24)

215 (8.46)

215 (8.46)

295 (11.61)

295 (11.61)

410 (16.14)

B5 = Max. front cutout, width

227 (8.94)

227 (8.94)

227 (8.94)

327 (12.87)

327 (12.87)

427 (16.81)

B6 = Hinged width for depth 100 mm (3.94")

220 (8.66)

220 (8.66)

220 (8.66)

320 (12.60)

320 (12.60)

420 (16.54)

B7 = Hinged width for depth 168 mm (6.61")

200 (7.87)

200 (7.87)

200 (7.87)

300 (11.81)

300 (11.81)

400 (15.75)

H2 = Enclosure height with handle grips

205 (8.07)

305 (12.00)

405 (15.94)

305 (12.00)

405 (15.94)

505 (19.88)

Width in mm (inches) (B1)

PU

Depth in mm (inches) (T1)
1

Part No. CP

H3 = Spacing of mounting panel attachment

122 (4.80)

250 (10.04)

350 (13.77)

250 (9.84)

330 (12.99)

445 (17.52)

H4 = Max. front cutout, height

155 (6.10)

255 (10.04)

355 (13.98)

255 (10.04)

355 (13.98)

455 (17.91)

H5 = Distance from base – mounting panel
attachment
Weight kg (lbs)

39 (1.54)

25 (0.98)

25 (0.98)

25 (0.98)

35 (0.98)

35 (0.98)

5.5 (12.13)

7.1 (15.65)

8.4 (18.52)

8.4 (18.52)

10.6 (23.37)

14.5 (31.97)

1032.600

1033.600

1034.600

1030.600

1380.600

1050.600

271324

271926

271924

274131

271548

271333

2316.000

2316.000

2316.000

2317.000

2317.000

2318.000

Page

Accessories
Matching mounting panel from AE
ID no.
Support

rails1)

SZ

Part No. SZ

10

HB 30
page 68
HB 30
page 983

Lock systems
Standard double-bit lock insert may be exchanged for 41 mm (1.61") lock inserts, plastic handle and T handle, version C, see page 245 – 246.
1)
2)

Only with vertical attachment of system bar 23 x 23 mm (0.91" x 0.91") see HB 30, page 976.
To order a Command Panel housing with door with mounting cutout CP-S, please use the extension number .080. Delivery times available on request.

66

Systems for the human/machine interface

with handle grips

Accessories:
Pedestal systems,
see page 132 – 149.
Support arms systems,
see page 80.

Material and Finish:
Enclosure and door:
Sheet steel, e-coat primed
and powder coated in textured
RAL 7035
Interior surfaces:
E-coat primed in RAL 7044
Handle grips:
Aluminum, powder coated in
RAL 5018.
Cover caps:
Plastic, RAL 5018
Protection ratings:
IP 55 to EN 60 529/10.91
Complies with NEMA Type 12

Rittal Service:
● Other sizes
● Other RAL colors
● Altered support arm cutout
or door hinge
● Holes and cutouts for
switches and operator
panels
● Aluminum front panels
(up to a thickness of 5 mm
(0.2
) may be positioned on
the enclosure front between
the side handle grips and the
door)
available on request.

Systems for the human/machine interface

Signal pillar
for system monitoring.
Part No. see Handbook 30,
page 1000 – 1002.

Command Panel housing with
door, stainless steel
The alternative where hygiene
and corrosion resistance are
important.
Part No. see page 74 – 75.
67

Command Panel

Command Panel housing with door

120
8 x 12.5

H1

H2

H3

Only for
CP 6532.200;
CP 6533.200

4.6

B4

20

For CP 6532.200
2 cams

B2

35

B1

234 (179)

190 (135)

Ø 70

T1

Ø

7

20

Ø
82

B3
Dimensions in brackets for CP 6540.200

Configuration:
Enclosure with reinforcement,
Support arm connection CP-L, round and
with mounting angles spot welded at the
sides.
Front with maximum cutout, covered with
easily machinable 3 mm (0.12
) aluminum
front panel and side handle grips with end
caps.
Rear with door.
Support arm connection
top
bottom

Door hinge
right
left

US patent no. 5,662,397
German patent no. 44 13 543
French Patent no. 95 04769
GB patent no. 2,288,971
Ital. patent no. 01273518
Jap. patent no. 2 820 637
US design patent no. des 375,938
German registered design
No. M 94 03 156
IR reg. design no. DM/031 020
with validity for BE, DE, ES, FR, IT, LU, NL
U.K. reg. des. no. 2 042 639
Jap. reg. des. No. 955 950

Height in mm (inches) (H1)

PU

Width in mm (inches) (B1)
Depth in mm (inches) (T1)

200 (7.78)

300 (11.81)

380 (14.96)

500 (19.69)

380 (14.96)

300 (11.81)

380 (14.96)

380 (14.96)

500 (19.69)

600 (23.62)
210 (8.27)

155 (6.1)

210 (8.27)

210 (8.27)

210 (8.27)

6540.200*

6531.200

6530.200

6532.200

6533.200

B2 = Enclosure width with handle grips

340 (13.39)

420 (16.54)

420 (16.54)

540 (21.26)

640 (25.20)

B3 = Clearance opening, front

260 (10.24)

340 (13.39)

340 (13.39)

460 (18.11)

560 (22.05)

B4 = Cutout, in enclosure

250 (9.84)

330 (12.99)

330 (12.99)

450 (17.72)

550 (12.65)

75 (2.95)

175 (6.89)

275 (10.83)

375 (14.76)

275 (10.83)

H3 = Cutout, in enclosure

150 (5.90)

250 (9.84)

330 (12.99)

450 (17.72)

330 (12.99)

Weight kg (lbs)

4.9 (10.80)

9.3 (20.50)

10.2 (22.49)

15.4 (33.95)

14.6 (32.19)

–

–

4594.000

4309.000

4594.000

Part No. CP

1

H2 = Hole distance of side mounting angles

Page

Accessories
Support strips PS for attaching to the mounting
sections on the side panel

20

HB 30,
page 950

Lock systems
Standard double-bit lock insert may be exchanged for 27 mm (1.06
) lock inserts, type A,
Plastic handles, T handles, version B and lock cylinders, see page 245 – 247.
* Support arm connection and door hinge at the bottom.

68

Systems for the human/machine interface

with handle grips

Rittal Service:

Accessories:

● Other sizes
● Other RAL colors
● Altered support arm cutout
or door hinge
● Holes and cutouts for
switches and operator
panels
available on request.

Pedestal systems,
see page 132 – 149.
Support arm system CP-L,
see page 96 – 115.

Connector for compact
enclosures
Part No. see page 228.

Enclosure connector,
adjustable
for screw-fastening to vertical
or horizontal surfaces.
Part No. see page 226.

Material and Finish:
Enclosure and door:
Sheet steel, e-coat primed
and powder coated in textured
RAL 7035
Interior surfaces:
E-coat primed in RAL 7044
Handle grips:
Aluminum, RAL 7030
Cover caps:
Plastic, RAL 7030
Protection ratings:
IP 55 to EN 60 529/10.91
Complies with NEMA Type 12
Support arm bracket 90°,
CP-L
for the configuration of
compact support arm systems.
Part No. see page 102.
Systems for the human/machine interface

69

Command Panel

Command Panel

Section A – A

B1
B2

35

120

A

8 x 12.5

4.6

H4

A

H5

B
H3

B
H2

H1

For CP 6442.000
only 1 cam in the
center

35

B3

190

T1 = 210

249

15

Section B - B

15.5

15.5

34

B4

Configuration:
Enclosure without support arm connection
with mounting angles spot-welded at the
sides. With maximum cutout at the front
and fitted, easily machinable 3 mm (0.12
)
front panel with aluminum designer frame,
Height in mm (inches) (H1)

r/h hinge, screw-fastened from the inside.
Rear door with r/h hinge,
with two cam locks
(for CP 6442.000 one lock).

380 (14.96)

600 (23.62)

500 (19.68)

600 (23.62)

Width in mm (inches) (B1)

380 (14.96)

380 (14.96)

500 (19.68)

600 (23.62)

Depth in mm (inches) (T1)

249 (9.80)

249 (9.80)

249 (9.80)

249 (9.80)

6442.200

6462.200

6552.200

6662.200

379 (14.92)

379 (14.92)

499 (19.65)

599 (23.58)

Part No. CP
B2 = Width of display panel front

PU

1

B3 = Clearance opening, front

309 (12.66)

309 (12.66)

429 (16.89)

529 (20.82)

B4 = Width of front panel

323 (12.72)

323 (12.72)

443 (17.44)

543 (21.38)

H2 = Height of display panel front

377 (14.84)

597 (23.50)

497 (19.57)

597 (23.50)

H3 = Clearance opening, front

307 (12.09)

527 (20.75)

427 (16.81)

527 (20.75)

H4 = Height of front panel

321 (12.61)

541 (21.30)

441 (17.36)

541 (21.30)

H5 = Hole distance of side mounting angles

250 (9.84)

450 (17.72)

350 (13.78)

450 (17.72)

Weight kg (lbs)

9.5 (20.94)

13.4 (29.54)

18.0 (39.68)

19.6 (43.21)

Lock systems
Standard double-bit lock insert may be exchanged for 27 mm (1.06
) lock inserts, type A,
Lock cylinder, plastic handles and T handles, type B, see page 245 – 247.
The reinforcement plate required for mounting on pedestal CP 6135.000, see page 147, is already included in the configuration in this model.
For Command Panels in RAL 7035, please use the extension number .500. Delivery times available on request.

70

Systems for the human/machine interface

with display panel front

Rittal Service:

Accessories:

● Other sizes
● Other RAL colors
● With support arm cutout
● Holes and cutouts for
switches and operator
panels
available on request.

Reinforcement plate with
support arm cutout,
see page 218.

Connection plate
Simply screw-fasten from the
outside.
Part No. see page 219.

Enclosure attachment
Tiltable for small enclosures for
mounting on surfaces.
Part No. see page 91.

Material and Finish:
Enclosure and door:
Sheet steel, e-coat primed
and powder coated in textured
RAL 7032
Interior surfaces:
E-coat-primed in RAL 7044
Frame and front panel:
Aluminum, natural anodized.
Protection ratings:
IP 54 to EN 60 529/10.91
Complies with NEMA Type 12

Handle set
with handle tube made of
aluminum.
Part No. see page 235.

Systems for the human/machine interface

71

Command Panel

Command Panel

The right frame, even for deeper
operator panels.
On request, the compact enclosure AE can
be equipped with an elegant VIP 6000
frame mounted on the rear. The large AE
door provides easy access for servicing.

B4
10
12.5

4.6

H3

H1

3

35

20

H2

Configuration:
Housing with integral roof or base
reinforcement and connection for support
arm system CP-L or CP-XL. Aluminum front
panel and front frame supplied loose, rear
door.

H4

8 x 12.5

30

21.5

B2

7
100

B1

70

7

D

T1

2
11

Support arm
connection for
system CP-XL

Support arm connection
for system CP-L, round

82

150
B3
On request, with external mounting of a keyboard housing
for cable entry

Width dimensions:
B1 = Enclosure width
B2 = B1 – 42 mm (1.65
), clearance
between the front frames
B3 = B1 + 79 mm (3.11
), overall width
B4 = B1 – 5 mm (0.20
), front panel width

Height dimensions:
H1 = Enclosure height
H2 = H1 – 42 mm (1.65
), clearance
between the front frames
H3 = H1 + 79 mm (3.11
), overall height
H4 = H1 – 5 mm (0.20
), front panel height

D = Position of support arm connection
For CP-L: 95 mm (3.74
)
For CP-XL: 165 mm (6.50
)
T1 = Enclosure depth

Command Panel with wide VIP 6000 frame in the dimensions of compact enclosures AE or in individual dimensions
Support arm connection for support arm system
without
CP-XL, top
CP-XL, bottom
CP-L, round, top
CP-L, round, bottom
Cable tube connection
without
bottom
Dimensions
Individual dimensions
as for compact enclosure AE (HB 30, pages 68 – 73)

6541.009

Design code number

6541.009
6541.009
6541.009
6541.009
6541.009

0
1
2
3
4

6541.009
6541.009

X
X

0
1

6541.009
6541.009

X
X

X H x W x D:
X Part No. AE:

Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
Lock cylinder, plastic handles and T handles, type, version B, see page 245 – 247.
Order example

6541.009

Order example
Part No. CP 6541.009
Design code numbers:
● Support arm connection CP-L, round,
bottom (4)
● Cable tube connection, bottom (1)
● Individual dimensions:
H x W x D: 537 x 352 x 350 mm
(13.86
 x 21.14
 x 13.78
)

72

4

1

H x W x D: 352 x 537 x 350 mm (13.86
 x 21.14
 x 13.78
)
(or e.g. AE 1050.600)

Additional mounting of a VIP 6000
keyboard housing is possible via the
design code number (see page 28). The
front panel width refers to an enclosure
width B1 – 54 mm (2.13
) and is achieved
via a frame connector, which is included in
the configuration of the keyboard housing.

Systems for the human/machine interface

with wide VIP 6000 frame

Accessories:
Pedestal systems,
see page 132 – 149.
Support arms systems,
see page 80.
VIP 6000 keyboard housing,
see page 28 – 31.

Material and Finish:
Enclosure and door:
Sheet steel, e-coat primed and
powder coated in textured
RAL 7035
Interior surfaces:
E-coat primed in RAL 7044
Front panel:
3 mm aluminum, natural
anodized
Frame section:
Aluminum, powder coated in
RAL 7035.
Frame corner pieces:
Die-cast zinc, powder-coated
in RAL 7035
Protection ratings:
IP 56 to EN 60 529/10.91
Complies with NEMA Type 12.

Connection plate
Simply screw-fasten from the
outside.
Part No. see page 219.

Systems for the human/machine interface

Pull-out keyboard
super-slimline with cursor keys
and trackball.
Part No. see page 263.

Interface box
for secure accommodation of
31/2
 drives or sockets.
Part No. see page 240.

73

Command Panel

Command Panel

150
105

40

H2

H1

H4

H3

2

H5

30

75 (A)

1

B5

168

1 = Welded studs M6 x 15

2 = Welded studs M6 x 30
for the attachment of mounting
panels or support rails

B1

118

30

100

105

Ø 49

5

5.

Ø

40

52.5

B4

A

15

B7
B6
B3
B2

Configuration:
Enclosure of all-round solid construction,
with cutout and reinforcement for support
arm system CP-S, stainless steel,
Height (H1) in mm (inches)

Fastener with guide plate.
Door with sealing frame and side
handle grips.
PU

Support arm connection

Door hinge

top

left

bottom

right

300 (11.81)

300 (11.81)

400 (15.75)

400 (15.75)

300 (11.81)

400 (15.75)

400 (15.75)

600 (23.62)

150 (5.91)

150 (5.91)

150 (5.91)

150 (5.91)

6535.010

6536.010

6538.010

6539.010

B2 = Enclosure width with handle grips

340 (13.39)

440 (17.32)

440 (17.32)

640 (25.20)

B3 = Clearance opening, front

260 (10.24)

360 (14.17)

360 (14.17)

560 (22.04)

B4 = Spacing of mounting panel attachment

215 (8.46)

295 (11.61)

295 (11.61)

510 (20.01)

B5 = Max. front cutout, width

225 (8.86)

325 (12.80)

325 (12.80

525 (20.66)

B6 = Hinged width for depth 100 mm (3.94
)

220 (8.66)

320 (12.60)

320 (12.60)

520 (20.47)

B7 = Hinged width for depth 118 mm (4.65
)

212 (8.34)

317 (12.48)

317 (12.48)

519 (20.43)

H2 = Enclosure height with handle grips

310 (12.20)

310 (12.20)

410 (16.14)

410 (16.14)

H3 = Spacing of mounting panel attachment

250 (9.84)

250 (9.84)

330 (12.99)

330 (12.99)

H4 = Max. front cutout, height

255 (10.04)

255 (10.04)

355 (13.98)

355 (13.98)

Width (B1) in mm (inches)
Depth (T1) in mm (inches)
1

Part No. CP

H5 = Distance from base – mounting panel
attachment
Weight kg (lbs)

25 (0.98)

25 (0.98)

35 (1.38)

35 (1.38)

6.3 (13.89)

7.5 (16.53)

8.8 (19.40)

12.1 (26.68)

1033.600

1030.600

1380.600

1039.600

Page

Accessories
Matching mounting panel from AE
ID no.
Support rails* SZ

Part No. SZ

10

271926

274131

271548

271351

2316.000

2317.000

2317.000

2319.000

HB 30
68
HB 30
983

Lock systems
Standard double-bit lock insert may be exchanged for 41 mm (1.61
) lock inserts, plastic handle and T handle, version C,
see page 245 – 246.
For the Command Panel housing with door in 1.4404 (Type 316L), please use the extension number .500. Delivery times available on request.
* = Only with vertical attachment of system bar 23 x 23 mm (0.91
 x 0.91
) see HB 30, page 976.

74

Systems for the human/machine interface

Stainless steel

Rittal Service:

Accessories:

● Separate keyboard housing
● Other sizes
● Rear support arm cutout or
modified door hinge
● Holes and cutouts for
switches and operator
panels
available on request.

see page 200 – 201
or see index.

Pedestal
for external mounting of
Command Panel housings with
door with rear support arm
cutout. Part No. see page 144.

The alternative
AE stainless steel, rear door,
support arm connection and
handle grips on request.
See Handbook 30, page 280.

Material:
Enclosure and door:
Type 304 stainless steel
Handle grips: Plastic approved
for use with foodstuffs,
RAL 5002.
Finish:
Brushed, 240 grain
Protection ratings:
IP 66 to EN 60 529/10.91
Complies with NEMA Type 4X

Semi-cylinder lock
for retro-fitting to all stainless
steel enclosures with cam lock.
Part No. see page 247.

Systems for the human/machine interface

75

Command Panel

Command Panel housing with door

B3

160
B1

150

B4

4.5
M6 x 15

H4

H5

H3

H2

H1

2

1

2

1

19

19

B2

B5

145
1 = does not apply to
CP 6670.000
2 = does not apply to
CP 6672.000

72.5

1 = does not apply to
CP 6670.000
2 = does not apply to
CP 6672.000

X

40

X = Mounting cutout

49

5

5.

Configuration:
Enclosure with cutout and reinforcement
for support arm system CP-S, stainless
steel.
Front panel/rear panel with seal and
installation hardware.

Width (B1) in mm (inches)

Two configuration options:
● Front panel screw-fastened at the front.
Recessed front panel installation for a
high level of mechanical protection of the
top-mounted equipment
● Front panel as rear panel,
additional handle grips made from
plastic approved for use with food,
similar to RAL 5002 on request.
PU

Height (H1) in mm (inches)

320 (12.60)

Depth in mm (inches)
Part No. CP

400 (15.75)

240 (9.45)

320 (12.60)
160 (6.30)

1

6670.000

6672.000

B2 = Clearance in width

275 (10.83)

355 (13.98)

B3* = Width of front panel

313 (12.32)

393 (15.47)

B4 = Hole spacing

288 (11.33)

368 (14.49)

B5 = Hole spacing

180 (7.09)

220 (8.66)

H2 = Clearance in height

195 (7.68)

275 (10.83)

H3* = Height of front panel

233 (9.17)

313 (12.32)

H4 = Hole spacing

208 (8.19)

288 (11.33)

–

180 (7.09)

5 (11.02)

8 (17.64)

H5 = Hole spacing
Weight kg (lbs)

For the Command Panel in RAL 1.4404 (Type 316L), please use the extension number .500. Delivery times available on request.
* Other sizes and machining of the front panel available on request.

76

Systems for the human/machine interface

Stainless steel

Accessories:
see page 200 – 201
or see index.

Material:
Type 304 stainless steel
Enclosure: 1.25 mm (18 ga)
Front panel: 2.0 mm (14 ga)
Finish:
Brushed, 240 grain
Protection ratings:
IP 65 to EN 60 529/10.91
Complies with NEMA Type 12

Handle grips
made from plastic approved for
use with food, similar to
RAL 5002 on request.

Systems for the human/machine interface

Enclosure attachment CP-S,
stainless steel
with prefitted screw for
location.
Part No. see page 93.

Connector gland
for 2 cables up to Ø 8 mm
(0.31
).
Part No. SZ 2400.300,
see page 220.
77

Command Panel

Command Panel

Rittal support arm systems . . .

CP-S

CP-L

CP-XL

Material:
Steel (left),
Stainless steel (right)

Material:
Aluminum

Material:
Aluminum

85

2 versions:
sealed (left)
open (right)

48,3

48

50

155

. . . and the panel is in position!

80

80

Support section bent,
Steel: see page 88.
Stainless steel:
see page 92.

Angle joint 90°,
CP-L,
see page 113.

Angle adaptor 90°
CP-XL to CP-L
Horizontal arm
section with
enclosure connection at the top
or bottom,
see page 121.

Angle adaptor 90°
CP-L to CP-S,
Steel: see page 89.

Support arm angle 90°,
CP-L,
see page 102.

Angle piece 90°,
CP-XL
Outlet at top
Horizontal section at
bottom,
see page 127.

CP-S / CP-L and CP-XL –
three load categories, three well-designed
systems with style. By combining CP-L with
CP-S and CP-XL with CP-L the solution
diversity is extended significantly.
The important joint – the transition from the
horizontal to the vertical – is illustrated
here.
Angle piece 90°,
CP-L
Horizontal arm section
with enclosure connection
at the top or bottom,
see page 115.

78

Systems for the human/machine interface

80 – 127

Combinations of enclosures/support arm systems

80 – 81

CP-S, steel
CP-S, stainless steel

82 – 91
82, 92 – 95

CP-L, aluminum
CP-XL, aluminum

96 – 115
116 – 127

Different viewing angles of the machine, tall or short operating staff,
sitting or standing – with the support arm sytems from Rittal, the
interaction between monitoring and operating is achieved to
perfection.
All system components for rotating, tilting, swivelling, – raising and
lowering are combined with one another with unbelievable
flexibility.
Three different systems are used, depending on the system
configuration, arm length and enclosure weight.

79

Support arms systems

Support arm systems

Support arm systems
Combinations of enclosures / support arm systems
The simplest approach is the best
The diagrams show how the the Rittal enclosures may be
connected to support arm systems, either directly or via
adaptors.
There is a choice of four support arm systems, depending on
your design, load and cabling requirements.

CP-S stainless steel
For use where there are special requirements in terms of
corrosion and hygiene.
CP-L
The system for average Command Panel weights,
stylish lines, and extreme solution diversity.

rotatable
components.

System end

CP-XL
The system for extreme loads. Also with open cable duct
for super-easy cable entry.

X = 0 (RAL 7030), X = 1 (RAL 7024)

Mounting cutout
CP-S

S

CP-S steel:

Compact Panel,
as well as small and slimline
enclosures, from an installation
depth of 100 mm (3.94
)

1, 2, 3
s. p. 85

Ø4
5
5

S

CP-S
steel

Connection to
support arm system

Mounting cutout and adaptor

Ø6

Enclosure

7

tiltable or

CP-S
For small and lightweight enclosures.

45°

CP-L:

SE

5

Stainless steel enclosures from
an installation depth of 100 mm
(3.94
)

Mounting cutout
CP-L, round
Enclosures from an
installation depth of 150 mm
(5.91
)

L

Connection plate
CP-L
With reinforcement plate
For enclosures from an
installation depth of
150 mm (5.91
) .
For easy location of the
Command Panel onto the
support arm or pedestal.

CP-L:
1.6, 2.1, 2.2, 2.4
3.1, 3.2, 3.3
s. p. 99

7

L

70

L

CP-S
stainless
steel:
2, 3
s. p. 87

49

SE

82

stainless
steel

5.

CP-S

Mounting cutout
CP-S stainless steel

40

1.6
s. p. 98

*

D

146

180

L

B
Ø7

165

L

79

CP 6528.2X0, see page 219
L

CP-L

Note:
May also be fitted via CP-L
mounting cutouts (additional
hole ∅ 7 mm (0.28
) required).

round

XL

XL

L
L

XL

XL

L
L

Dimensions B, D depending on the
enclosure, see page 219
* ∅ 6 mm / (0.24
) only with metal
enclosures, for securing the
reinforcement plate.

Connection adaptor
CP-L to CP-XL
For mounting between enclosures with
support arm connection CP-L and support
arm system CP-XL.
Benefits: High load capacity and
easier cable routing

CP-XL:
2, 3
s. p. 119

CP 6528.0X0, see page 104
Connection adaptor
CP-L to CP-XL
To bridge the frame when mounting
between VIP 6000 enclosures with
installation depths from 155 mm (6.10
) to
295 mm (11.61
) with support arm
connection CP-L and
support arm system CP-XL
Benefits: High load capacity and
easier cable routing
CP 6528.500, see page 104

80

Systems for the human/machine interface

Support arm systems
Connection to
support arm system

Mounting cutout and adaptor
Mounting cutout
CP-L, rectangular

7

A

Enclosures from an
installation depth
of 100 mm (3.94
)

L

20

L

A = max. 55
B = max. 100

50
95

A

Connection console
CP-L, rectangular A
For Optipanel,
from an installation depth
of 50 mm (1.97
)
89

CP 6508.0X0
on Optipanel
support plate B

L

CP-L

2.3, 2.4
3.4, 3.5, 3.6
s. p. 99

Alternative
max. ∅ 55

B

L

CP-L:

40

Enclosure

rectangular

133

CP 6508.100
see page 108 – 109

Enclosure with
mounting cutout C

L

60
6

7

21.5

10.5
63

A

Connection
console CP-L,
rectangular A
For other slimline
enclosures

30.5 27.5

L

89

B

90

CP 6508.0X0,
see page 108

6
30

C

133

Mounting cutout
CP-XL

7

XL

XL

100

Enclosures from an
installation depth of 150 mm
(5.91
)

CP-XL:
2, 3
s. p. 119

2

11

146

*

D

CP 6528.300, see page 219
XL

L

Note:
May also be fitted via CP-L
mounting cutouts (additional
hole ∅ 7 mm (0.28
) required).

CP-L:
2.1, 2.2, 2.4
3.1, 3.2, 3.3
s. p. 99

CP 6528.0X0, see page 104

XL

Enclosure attachment, tilting,
top mounting
To fit enclosures
with cutout:
CP-S,
CP-L rectangular,
CP-L round,
VESA Standard 75

S

Ve
s
75 a

L

Vesa 75

Dimensions B, D depending on the
enclosure, see page 219
* ∅ 6 mm / (0.24
) only with metal
enclosures, for securing the
reinforcement plate.

Connection adaptor
CP-L to CP-XL
For mounting between enclosures with
support arm connection CP XL and support
arm system CP-L, provided the load permits
and a stylish design is required.

L

XL

VESA
75

180

XL

B
Ø7

L

L

S

With cable tube for protected
cable entry.

75

CP-S:
3
s. p. 85

75

CP-XL

XL

79

165

XL

Connection plate
CP-XL
with reinforcement plate
For enclosures from an
installation depth of
150 mm (5.91
).
For easy location of the
command panel onto the
support arm or pedestal.

CP-L:
Ø 6/M5

3.4, 3.5, 3.6
s. p. 99

IW 6902.670, see page 91

Systems for the human/machine interface

81

Support arms systems

Combinations of enclosures / support arm systems

Support arm systems CP-S . . .
. . . small but powerful!

The compact support arm system for small
and slimline Command Panels.

CP-S
Material:
Steel

● Simple, fast assembly via clamping
screws on the support arm components.
● 2 color combinations facilitate an
individual design.
● The moving parts have a
maintenance-free friction bearing.
● Horizontal connection to the larger CP-L
support arm system also facilitates
longer support arm lengths.

Order instructions for enclosures with
support arm connection CP-S:
● VIP 6000, Optipanel,
should be ordered by adding an “S” to
the design code number.
● Other Command Panels
are ordered by adding extension .100
to the Model No.
● With other enclosures, please state “with
support arm connection and
reinforcement plate CP-S” in the order
text.
Delivery times available on request.

48.3

A max. = C max. = 800 mm (31.50
)
W

CP 6501.1X0

800

C

A

Permissible static load [N]
(Enclosure + vertical
support arm section)

Load capacity CP-S steel:

CP 6501.040
CP 6501.050
CP 6501.060
CP 6501.070

600

400

200

200

400

600

800

1000

1200

1400

1600

Arm length B [mm]
When using CP-S in conjunction with CP-L
(in the horizontal development of the sytem), the
load diagram for CP-L applies

In conjunction with stainless steel
enclosures (Command Panels, terminal
boxes 120 mm (4.72
) deep, compact
enclosures AE), this support arm system is
particularly well-suited to meet demanding
requirements in terms of corrosion protection and hygiene.

CP-S
Material:
Stainless steel

bottom of the enclosure. They are not
suitable for use as the base point of a
system. For this purpose, we recommend
wall/base mountings, or with larger heights
and widths, an additional pillar made of
steel tubing or stainless steel (available on
request).

The tilting adaptor and enclosure coupling
may optionally be mounted on the top or

48

A max. = C max. = 800 mm (31.50
)

Permissible static load [N]
(enclosure + vertical
support arm section)

A

Load capacity CP-S stainless steel:

CP 6663.400

C

W

Protection ratings:
IP 69K to DIN 40 050-9/5.93
(protection for high-pressure cleaning)

800

IP 69 K

600

400

200

200

400

600

800

1000

1200

1400

1600

Arm length B [mm]
82

Systems for the human/machine interface

84 – 95

Fast selection, steel

84 – 85

Fast selection, stainless steel

86 – 87

CP-S components, steel

88 – 91

CP-S components, stainless steel

92 – 95

2

7
3
4
6

5

CP-S steel
1

Attachment of CP-S for rigid mounting
of the support section on enclosures or
flat surfaces.

2/3 CP-S wall/base mounting for front
mounting on the floor or on surfaces.
8

9

4

The tube is available in standard
lengths in the following versions:
straight, L-shaped and U-shaped.

5

For swivel mounting of the enclosure,
enclosure coupling CP-S is used.

6

If a higher load capacity is required,
combination with CP-L offers a solution.
Angle adaptor 90°, CP-L to CP-S,
provides the connection.

7

Easier cable routing, thanks to the
removable cover.

CP-S stainless steel

10

8

Rigid wall/base mounting. Swivel base
mountings are likewise available.

9

In stainless steel, the support section is
also available in straight, L-shaped,
U-shaped and Z-shaped versions.

10 The housing coupling offers a rotation
range of approximately 350°.

11

11 The pedestal base plate in conjunction
with the rigid enclosure attachment
provides a basis for Command Panels
with pedestal.

83

Support arms systems

Support arm system CP-S

1

Support arm system CP-S
Steel, fast selection
It’s so easy!

T

Make a simple sketch showing the basic
form of the support arm. Next, select the
corresponding support arm components.
Start at 1 “system start” by selecting the
enclosure situation which best describes
your requirements.

Support sections

Amax. = 2000 mm (74.74
)

A

RAL 7035
Part No. CP

A mm (inches)

Continue with CP-S according
to the item numbers.
System changes are indicated
by the color.

Amin. = 100 mm (3.94
)

T1 support section CP-S
straight

RAL 9006
Part No. CP

500 (19.69)

6501.000

6501.010

1000 (39.37)

6501.020

6501.030

(to specifications)

6501.350*

6501.340*

See page 88

Green = CP-L
System continuation/system
end:

Amin. = Bmin. = 240 mm (9.45
)

T2 support section CP-S
L-bend

Bmax. = 1500 mm (59.06
)

B

all directions
A

vertical
horizontal

A
mm (inches)

B
mm (inches)

RAL 7035
Part No. CP

RAL 9006
Part No. CP

240 (9.45)

500 (19.69)

6501.230

6501.220

around a corner

500 (19.69)

1000 (39.37)

6501.250

6501.240

(to specifications)

(to specifications)

6501.210*

6501.200*

See page 88

tiltable or
rotatable components

Amin. = Cmin. = 240 mm (9.45
)

T3 support section CP-S
U-bend

Bmin. = 410 mm (16.14
)

B

From item 3 a support section
is required between each
component (minimum length
approx. 100 mm (3.94
), for
wall/floor mounting approx.
160 mm (6.30
)).
The cross-sections indicate the
installation position(s).

A

Bmax. = 1500 mm (59.06
)

C

A
B
C
mm (inches) mm (inches) mm (inches)

RAL 7035
Part No. CP

RAL 9006
Part No. CP
6501.280

240 (9.45)

800 (31.50)

800 (31.50)

6501.290

240 (9.45)

500 (19.69)

500 (19.69)

6501.310

6501.300

To specifica- To specifica- To specifications
tions
tions

6501.270*

6501.260*

See page 88
Amin. = Cmin. = 240 mm (9.45
)

T4 support section CP-S
Z-bend
5.1

T2

Bmin. = 410 mm (16.14
)

B

Bmax. = 1500 mm (59.06
)

3.1

Assembly example:

2.1

1.1

C

T2 Support section CP-S
1.1 Mounting cutout CP-S

A

2.1 Tilting enclosure attachment,

top mounting
3.1 Enclosure attachment CP-S

A
B
C
mm (inches) mm (inches) mm (inches)

RAL 7035
Part No. CP

RAL 9006
Part No. CP

5.1 Wall/base mounting CP-S

To specifica- To specifica- To specifications
tions
tions

6501.330*

6501.320*

See page 88

Note:
After any given support section, the 90°
angle adaptor CP-L to CP-S may be used
as a transition to the CP-L system.

84

* Delivery times available on request

Systems for the human/machine interface

Support arm system CP-S
Steel, fast selection
System start

1.1 Mounting cutout
CP-S

3 Enclosure
attachments

4 Angle
components

3.1 Attachment
CP-S
2
3

see page 80

CP 6501.060 (RAL 7030)
CP 6501.070 (RAL 7024)
see page 90

5

4.1 Angle adaptor 90°
CP-L to CP-S
4
5

System end

5.1 Wall/base mounting
CP-S

CP 6501.080 (RAL 7030)
CP 6501.090 (RAL 7024)

CPL

CP 6501.100 (RAL 7030)
CP 6501.110 (RAL 7024)

see page 89

s. p.
98
99

see page 89

S

Support arms systems

1

All options see page 80 – 81

1.2 Enclosure attachment,
tilting, top mounting*
IW 6902.670 (RAL 7024)

3
S

see page 91

S

L

CPL

3.2 Housing coupling
CP-S

s. p.
99

CP 6501.040 (RAL 7030)
CP 6501.050 (RAL 7024)

The support sections
CP-S, bent (T2, T3, T4) are
used as angle
components.

5

see page 90

Vesa 75

L

L

S

S

2

Tilting adaptor

2.1 Enclosure attachment,
tilting, top mounting*
IW 6902.670 (RAL 7024)

3

see page 91
CPL
S

Vesa 75

s. p.
99

L

L

L

S

* May also be used rotated through
180°, e.g. from CP-L rectangular or
CP-S to CP-L round.

Systems for the human/machine interface

85

Support arm system CP-S
Stainless steel, fast selection
It’s so easy!

T

Make a simple sketch showing the basic
form of the support arm. Next, select the
corresponding support arm components.
Start at 1 “system start” by selecting the
enclosure situation which best describes
your requirements.

Support sections
Amin. = 100 mm (3.94
)

T1 support section CP-S
Stainless steel, straight

Amax. = 2000 mm (74.74
)

A

A mm (inches)

Continue with CP-S stainless
steel according to the item
numbers.
System continuation/system
end:
all directions

Part No. CP

500 (19.69)

6660.050

1000 (39.37)

6660.010

2000 (78.74)

6660.020

(to specifications)

6660.000*

See page 92
Amin. = Bmin. = 240 mm (9.45
)

T2 support section CP-S
L-bend

Bmax. = 1500 mm (59.06
)

B

vertical
A

horizontal
around a corner

rotatable components
From item 3 a support section
is required between each
component (minimum length
approx. 100 mm (3.94
), for
wall/floor mounting approx.
160 mm (6.30
)).
The cross-sections indicate the
installation position(s).

A mm (inches)

B mm (inches)

240 (9.45)

500 (19.69)

6660.110

500 (19.69)

1000 (39.37)

6660.120

(to specifications)

(to specifications)

6660.100*

Part No. CP

See page 92
Amin. = Cmin. = 240 mm (9.45
)

T3 support section CP-S
U-bend

Bmin. = 410 mm (16.14
)

B

A

Bmax. = 1500 mm (59.06
)

C

A
B
C
mm (inches) mm (inches) mm (inches)

Part No. CP

240 (9.45)

800 (31.50)

800 (31.50)

240 (9.45)

500 (19.69)

500 (19.69)

6660.210
6660.220

To specifica- To specifica- To specifications
tions
tions

6660.200*

See page 92
* Delivery times available on request

5.1

T2

3.1

Assembly example:

2.1
1.1

T2 Support section CP-S, stainless steel
1.1 Mounting cutout CP-S, stainless steel
2.1 Tilting adaptor 10° CP-S,

stainless steel
3.1 Enclosure attachment CP-S,

stainless steel
5.1 Wall/base mounting, rigid

CP-S, stainless steel

86

Systems for the human/machine interface

Support arm system CP-S
Stainless steel, fast selection
System start

1.1 Mounting cutout
CP-S stainless steel

4 Angle
components

3.1 Enclosure attachment
CP-S stainless steel
2
3

see page 80

3 Enclosure
attachments

CP 6664.500, see page 93

5

The support sections
CP-S, bent (T2, T3) are
used as angle
components.

5

5

System end

Support arms systems

1

All options see page 80 – 81

5.1 Wall/base mounting,
rigid
CP-S stainless steel
CP 6663.000, see page 94

SE

2

Tilting adaptor

SE

2.1 Tilting adaptor 10°
CP-S stainless steel
IW 6664.100, see page 93

3.2 Housing coupling
CP-S stainless steel
3

CP 6664.000, see page 93

5.2 Swivel wall/base
mounting
CP-S stainless steel
CP 6663.400
(front hole ∅ 9 mm (0.35
))
CP 6663.500
(M8 thread at rear)
see page 94

SE

SE
SE

5.3 Wall console
CP-S stainless steel
CP 6665.500
(front hole ∅ 9 mm (0.35
))
CP 6665.000
(M8 thread at rear)
see page 95
SE

Systems for the human/machine interface

87

Support arm system CP-S
Steel
Other sizes to order available on
request.

Support arm section
CP-S

Order example:
Z-bend = CP 6501.330
Dimension A = 300 mm (11.81
)
Dimension B = 800 mm (31.50
)
Dimension C = 240 mm (9.45
)

Twelve standard items available off the
shelf, which may be adapted to your
individual requirements by cutting to
length.
Material:
Steel tube

The minimum dimensions must be adhered
to, because of the bending radius and
insertion depth of the enclosure
attachment, housing coupling and wall/
base mountings.

Finish:
Powder coated
Size:
External diameter: 48.3 mm (1.90
)
Wall thickness: 4.0 mm (0.16
)

Straight
Amin. = 100 mm (3.94
),
Amax. = 2000 mm (78.74
)

L-shaped
Amin. = Bmin. = 240 mm (9.45
),
Bmax. = 1500 mm (59.06
)

A

B

R 100

U-shaped
Amin. = Cmin. = 240 mm (9.45
),
Bmin. = 410 mm (16.14
)
Bmax. = 1500 mm (59.06
)

C

A

B

R 100

Color
RAL
7035
9006
7035
9006

A
B
Weight
mm (inches) mm (inches) kg (lbs)
240 (9.45) 500 (19.69) 3.3 (7.28)
240 (9.45) 500 (19.69) 3.3 (7.28)
500 (19.69) 1000 (39.37) 6.6 (14.55)
500 (19.69) 1000 (39.37) 6.6 (14.55)
To specifica- To specifica- 4.2 (9.26)
tions A =
tions B =
kg/m
To specifica- To specifica- 4.2 (9.26)
tions A =
tions B =
kg/m

Color
RAL
7035
9006
7035
9006

500 (19.69)
500 (19.69)
1000 (39.37)
1000 (39.37)
To specifications
A=
To specifications
A=

A

R 100

Weight
kg (lbs)
2.1 (4.63)
2.1 (4.63)
4.2 (9.26)
4.2 (9.26)
4.2 (9.26)
kg/m
4.2 (9.26)
kg/m

A mm (inches)

A mm
(inches)
240
(9.45)
240
(9.45)
240
(9.45)
240
(9.45)

B mm
(inches)
800
(31.50)
800
(31.50)
500
(19.69)
500
(19.69)

C mm
(inches)
800
(31.50)
800
(31.50)
500
(19.69)
500
(19.69)

Part No.
CP
6501.000
6501.010
6501.020
6501.030

7035 6501.350*
9006 6501.340*

Part No.
CP
6501.230
6501.220
6501.250
6501.240

7035 6501.210*
9006 6501.200*

Weight Color Part No.
kg (lbs) RAL
CP
8.0
7035 6501.290
(17.64)
8.0
9006 6501.280
(17.64)
5.2
7035 6501.310
(11.46)
5.2
9006 6501.300
(11.46)

(To spec- (To spec- (To spec- 4.2 (9.26)
ifications) ifications) ifications)
7035 6501.270*
kg/m
A=
B=
C=
(To spec- (To spec- (To spec- 4.2 (9.26)
ifications) ifications) ifications)
9006 6501.260*
kg/m
A=
B=
C=

Z-shaped
Amin. = Cmin. = 240 mm (9.45
),
Bmin. = 410 mm (16.14
)
Bmax. = 1500 mm (59.06
)
B

A

C

R 100

A mm
B mm
C mm Weight Color Part No.
(inches) (inches) (inches) kg (lbs) RAL
CP
(To speci- (To speci- (To speci- 4.2
fications) fications) fications) (9.26) 7035 6501.330*
A=
B=
C=
kg/m
(To speci- (To speci- (To speci- 4.2
fications) fications) fications) (9.26) 9006 6501.320*
A=
B=
C=
kg/m
* Delivery times available on request

R 100

88

Systems for the human/machine interface

Support arm system CP-S

55.5

47.5

A

69

The connecting component between
● the horizontal support section CP-L and
● the vertical support section CP-S
Outlet option top or bottom if this
configuration is chosen for structural or
visual reasons. The removable cover
ensures easier cable entry.

106

Angle adaptor 90°
CP-L to CP-S

Material:
Cast aluminum
Configuration:
Seal and self-tapping screws for CP-L or
clamping screws for CP-S support section
attachment.
Color
RAL
7030
7024

Weight
kg (lbs)
1.0 (2.20)
1.0 (2.20)

Part No.
CP
6501.080
6501.090

Ø 40
75

View A

156

Note:
Mounting component for signal pillar
available on request.

71

Wall/base mounting
CP-S

9

Material:
Cast aluminum

Adjusting screw

M10

For rigid attachment of the support section
to surfaces. With flange for front mounting.

A

Configuration:
Seal, 2 clamping screws for support
section CP-S and 3 pre-fitted adjusting
screws.
Color
RAL
7030
7024

Weight
kg (lbs)
0.7 (1.54)
0.7 (1.54)

Part No.
CP
6501.100
6501.110

73
115

View A
Ø 48.8

65
12

72

Ø 40

Mounting cutout
8

M

Ø

9/

56

Ø

95

Ø

Systems for the human/machine interface

89

Support arms systems

Steel

Support arm system CP-S
Steel
68

Attachment
CP-S

58

M6

For rigid attachment of the
● enclosure to the support section,
● support arm to flat surfaces, rear*.

71

20

45°

With two drilling patterns for
a) Rittal Command Panel
b) Complete Control Panel

90

Material:
Die-cast zinc

Clamping screw

Configuration:
Seal and 2 clamping screws for support
section CP-S.

48

Weight
kg (lbs)
1.0 (8.99)
1.0 (8.99)

Ø 48.8

Part No.
CP
6501.060
6501.070

12

Color
RAL
7030
7024

48

Ø 65

Ø 40

* Maximum load 400 N (40 kg/88.18 lbs).

Like cutout a),
but without
lock holes

Mounting cutouts
b)

7

7

7

7

a)1)

45°

25°

5

Ø4

Ø4
5
5

45
Ø4
5°

Ø6

Ø 65

48

1) Possible for Optipanel with an installation
depth of 100 mm (3.94
) and 150 mm
(5.91
). Under 2.3 (see page 49), in addition
to the design code number, 1 to 3 please
enter an S .

45°

45°

13.5
58

68

Housing coupling
CP-S

58

M6

For swivel mounting of the enclosure on the
vertical section of the support arm system.

71

20
45°

90

Rotation range:
Approx. 350 °, lockable via clamping lever

Clamping screw

38

Material:
Die-cast zinc

43

Configuration:
Seal, 2 clamping screws for support
section CP-S and clamping lever.
20

Note:
May also be used as top mounted joint.
Load capacity, see page 82.

Ø 40

Color
Weight
Part No.
RAL
kg (lbs)
CP
7030
1.1 (2.43)
6501.040
7024
1.1 (2.43)
6501.050
* Depending on the weight of the
command panel, this can be used to
make rotation easier or harder.

Mounting cutouts
a)1)

Screw for adjusting rotatability*

Like cutout a),
but without
lock holes
7

7

7

b)

7

1) Possible for Optipanel with installation
depth 100 mm (3.94
) and 150 mm (5.91
).
Under 2.3 (see page 49), in addition to the
design code number, 1 to 3 please
enter an S .

48

Ø 65

With two drilling patterns for
a) Rittal Command Panel
b) Complete Control Panel

45°

Ø4
5
Ø6

5

5

Ø4

45
Ø4
5° 45°

48

25°

Ø 65

45°

13.5
58

90

Systems for the human/machine interface

Support arm system CP-S
Tilting enclosure attachment,
top mounting

1) May also be used as a tilting adaptor
+100°/–60° for CP-S.

75

6

28

Ø8

75

2

7

Ø 65

For mounting on:
● IW worktop, prepared for enclosure
attachment CP-L, round,
see page 106.
● Surfaces
● Enclosure attachment/coupling
CP-L rectangular, see page 106, 109
● Attachment/housing coupling CP-S 1),
see page 90.

Support arms systems

Steel

To fit enclosures up to 20 kg (44.09 lbs)
with cutout:
● CP-S
● CP-L rectangular,
● CP-L round,
● VESA Standard 75
70
15°

With cable tube for protected cable entry.
Tilt angle:
+100°/–60°, lockable in 7.2° increments via
clamping lever and may be limited to
+100°/–15° with the included stop screw.
Material:
Sheet steel, painted

90

Color
RAL
7024

Weight
kg (lbs)
0.8 (1.76)

Part No.
IW
6902.670

43

Configuration:
Installation hardware and plastic bellows
section.

Ø

65

131

63

IW worktops prepared
for enclosure attachment,
see page 162/163.

95

Accessories:

28
40

Systems for the human/machine interface

91

Support arm system CP-S
Stainless steel
Other sizes to order available on request.

Support section
CP-S, stainless steel
Seven standard part numbers available off
the shelf, which may be adapted to your
individual requirements by cutting to length.
Material:
Type 304 stainless steel
Finish:
Brushed, 240 grain
Dimensions:
External diameter: 48 mm (1.89
)
Wall thickness: 3.6 mm (0.14
)

Straight
Amin. = 100 mm (3.94
),
Amax. = 2000 mm (6.56
)
A

L-shaped
Amin. = Bmin. = 240 mm (9.45
),
Bmax. = 1500 mm (59.06
)

Order example:
U-shaped = CP 6660.200
Dimension A = 300 mm (11.81
)
Dimension B = 800 mm (31.50
)
Dimension C = 240 mm (9.45
)
The minimum dimensions must be adhered
to, because of the bending radius and insertion depth of the enclosure attachment,
housing coupling and wall/base mountings.

A mm (inches)

Weight
kg (lbs)

Part No.
CP

500 (19.69)

2.0 (4.41)

6660.050

1000 (39.37)

3.9 (8.60)

6660.010

2000 (78.74)

7.8 (17.20)

6660.020

(To specifications)
A=

3.9 (8.60)
kg/m

6660.000*

A
mm
(inches)

6660.110

2.6 (5.73)

6660.120

3.9 (8.60)
kg/m

6660.100*

A
B
C
Weight
mm
mm
mm
kg (lbs)
(inches) (inches) (inches)

Part No.
CP

A

To specifi- To specifications
cations
B=
A=

U-shaped
Amin. = Cmin. = 240 mm (9.45
),
Bmin. = 410 mm (16.14
),
Bmax. = 1500 mm (59.06
)

R130

C

A

B

Part No.
CP

1000
(39.37)

500 (19.69)

R130

Weight
kg (lbs)

240 (9.45) 500 (19.69) 2.6 (5.73)
B

R130

B
mm
(inches)

240
(9.45)

800
800
(31.50) (31.50)

6.6
(14.55)

240
(9.45)

500
500
4.3 (9.48) 6660.220
(19.69) (19.69)

6660.210

To
To
To
specific specific specific 3.9 (8.60)
6660.200*
kg/m
ations ations ations
A=
B=
C=
* Extended delivery times

92

Systems for the human/machine interface

Support arm system CP-S
Tilting adaptor, 10°
CP-S, stainless steel

Weight
kg (lbs)
0.7 (1.54)

For mounting between the Command Panel
and
● Enclosure attachment CP 6664.500
or
● Housing coupling CP 6664.000

Support arms systems

Stainless steel

Part No. CP
6664.100

Material:
Type 304 stainless steel
Configuration:
Seal and installation hardware.
Mounting cutout
Enclosure:

84
30

40

40

5.
5
49

10°

49

15

Enclosure attachment
CP-S, stainless steel

Weight
kg (lbs)
1.3 (2.87)

For rigid attachment of the enclosure to the
support section.
Material:
Type 304 stainless steel

Part No. CP
6664.500

Accessories:

Configuration:
Seal and 2 clamping screws for support
section CP-S, stainless steel.

Enclosure reinforcement,
see page 218.

Note:
For assembly of a modular pedestal
(see page 144) 2 of these are required.

Mounting cutout
for pedestal, bottom

Mounting cutout
Enclosure
40

Ø 48.3

5

5.

Ø9

49

52

31

Clamping
screw

Ø 40
Ø 40

Ø 62

Ø 84

Housing coupling
CP-S, stainless steel

Weight
kg (lbs)
1.1 (2.43)

For mounting on the vertical part of the
support arm system.
Rotation range:
Approx. 350 °, lockable via knurled screw.
Material:
Type 304 stainless steel

6664.000

Accessories:
Enclosure reinforcement,
see page 218.
Ø 48.3

Mounting cutout
Enclosure

Clamping
screw

40

Configuration:
Seal and 2 clamping screws for support
section CP-S, stainless steel.

Part No. CP

49

23

53

30

5
5.

Ø 40
Ø 84

Systems for the human/machine interface

93

Support arm system CP-S
Stainless steel
Wall/base mounting,
rigid, CP-S stainless steel

Weight
kg (lbs)
1.7 (3.75)

For attaching the support arm system to
vertical or horizontal surfaces.
Material:
Type 304 stainless steel

Part No. CP
6663.000

Accessories:

Configuration:
Seals, 3 adjusting screws to compensate
for any irregularities, and 2 clamping
screws for support section
CP-S, stainless steel.

Wall consoles,
see page 95.

Mounting cutout

110

65

42

90

Ø 48.3

9 / M8

Adjusting
screw

3

42 – 50

20

Swivel base mount, CP-S
stainless steel
For external mounting on
● Horizontal surfaces
● Wall console (CP 6663.500 only).
Rotation range:
Approx. 350 °, lockable via knurled screw.

Rear
M8 thread
Front
hole
Ø 9 mm (0.35
)

Material:
Type 304 stainless steel

Rear fastening

Weight
kg (lbs)

Part No.
CP

3.9 (8.60)

6663.500

4.5 (9.92)

6663.400

Attachment

Configuration:
Seals and 2 clamping screws for support
section CP-S, stainless steel.
Note:
Rotation range may be limited in 60°
increments using a limit plate, supplied
loose.

Accessories:
Wall consoles for base mounting
(CP 6663.500)
see page 95.

Rear attachment CP 6663.500
Ø 48.3

9

40

.5
95

111

48

Mounting cutout

M8

Ø 40

M8

Ø 110

Front attachment CP 6663.400
Ø 48.3

40

12

111

M

8

9

12

48

Mounting cutout

Ø 40
Ø 149

Front fastening
94

Systems for the human/machine interface

Support arm system CP-S
Wall console
CP-S, stainless steel

Attachment

Weight
kg (lbs)

Rear
1.5 (3.31)
M8 thread
Front hole
1.5 (3.31)
Ø 9 mm (0.35
)

With holes for mounting:
● Swivel base mount, CP-S (CP 6663.500)
with 4 screws
● Wall/base mounting, rigid, CP-S
(CP 6663.000) with 4 screws and nuts

Support arms systems

Stainless steel
Part No.
CP
6665.000
6665.500

Material:
Type 304 stainless steel
Finish:
Brushed, 240 grain
Configuration:
Seals and installation hardware.

Rear fastening
129

144

71

52

Rear fastening
Example: CP 6665.000 + CP 6663.000

Mounting cutout
71

1

90

100

105

116

70

116

M8

9

M8
70

2
1 = hole for CP 6663.000
2 = hole for CP 6663.500

Front fastening

144

71

52

129

Mounting cutout

71

M8

100

105

160

140

70

116

1

70

Front fastening
Example: CP 6665.500 + CP 6663.500

2

7.5

1 = hole for CP 6663.000
2 = hole for CP 6663.500

Systems for the human/machine interface

95

Support arm system CP-L . . .
. . . compact elegance!

Support arm system CP-L

CP-L

This support arm system combines compact sizes and elegant
styling with excellent load capacity for small and medium-sized
enclosures. All moving parts have a maintenance-free friction
bearing.

Material:
Aluminum

85

Tilting adaptors, enclosure attachments and couplings may
optionally be mounted on the top or bottom of the enclosure.
These components are not suitable for use as the base point of
a support arm system. For the swivel configuration we
recommend the pillar with corresponding components.
50

US patent no. 5,460,894
German patent no. 43 31 124
French Patent no. 94 10 806
Ital. patent no. 01275022
Jap. patent no. 2730621

Load capacity CP-L:

A: System assembly without joint

CP 6520.0X0

Permissible static load
(Enclosure and vertical support arm section) [N]

B: System assembly with one joint

Permissible load depending on system configuration
Intermediate hinge CP 6523.0X0 should only be used
once per system!

CP 6523.0X0
CP 6520.0X0
CP 6522.0X0

800
700
600
CP 6521.0X0
500

A

400

B

C: System assembly with two joints
CP 6522.0X0

300

C

CP 6523.0X0

200
100
CP 6523.0X0
0

0

200

400

600

800

1000

1200

1400

1600

1800

2000
CP 6521.0X0

Arm length [mm]

96

Systems for the human/machine interface

Support arm system CP-L

98 – 115

4

98 – 99

Support arm, height adjustable

100 – 101

CP-L components

102 – 115

3

2

1

7

1 Housing coupling for swivel mounting of
the enclosure on the vertical part of the
support arm system, with the enclosure
either suspended or top-mounted.
2 Self-tapping screws for individual
configuration without the need for timeconsuming thread tapping.

6

3 Plastic cover with seal facilitates easy
access to the installed cables.
4 Extruded aluminum section of high
bending resistance, easily adapted to
individual situations by cutting to length.
5 Intermediate hinge for vertically hinged
connection of horizontal support
sections within the support arm system.
6 A high load capacity and a stylish
design are combined by connecting
systems CP-L and CP-XL with the 90°
angle adaptor.
7 Easily positioned at any height – thanks
to the height-adjustable CP-L support
arm.
8 The CP-L system is also used in deep
enclosures with CP-XL connection. The
CP-L/CP-XL connection adaptor makes
the connection.
9
8

9 Even super-slimline Optipanels are no
problem: the connection console
provides the interface to the components of the CP-L support arm system.

97

Support arms systems

Fast selection
5

Support arm system CP-L
Fast selection
It’s so easy!

T

Make a simple sketch showing the basic
form of the support arm. Next, select the
corresponding support arm components.
Start at 1 “system start” by selecting the
enclosure cutout which best describes your
requirements.

Support sections

1

System start

All options see page 80 – 81
T1 support section CP-L

1.1 Mounting cutout
CP-L, round
2.1
2.2
3.1
3.2
3.3

L

1.2 Connection plate CP-L
with connection for
CP-L
CP 6528.2X0, see page 219

Continue with CP-L according
to the item numbers.
System changes are indicated
by the color.

L

Blue = CP-S
Violet = CP-XL

Length
mm (inches)

System continuation/system
end:
all directions

vertical

Color
Part No. CP
RAL

250 (9.84)

7035

500 (16.69)

7035

6509.000
6511.000

1000 (39.37)

7035

6513.000

2000 (78.74)

7035

6515.000
6709.010

250 (9.84)

9006

500 (16.69)

9006

6511.010

1000 (39.37)

9006

6513.010

2000 (78.74)

9006

6515.010

horizontal

See page 102

around a corner

T2 support arm, heightadjustable,
CP-L

L

1.3 Busbar connection
adaptor
CP-L to CP-XL
CP 6528.000, see page 104
L

XL

tiltable or
rotatable components

max.
800 mm
(31.50
)

From item 3 a support section
is required between each
component (minimum length
approx. 100 mm (3.94
), for
wall/floor mounting approx.
160 mm (6.30
)).
The cross-sections indicate the
installation position(s).

1.4 Mounting cutout
CP-L, rectangular
2.3
2.4
3.4
3.5
3.6

L

1.5 Connection console
CP-L rectangular A

Color: RAL 7024/9006
Weight range
kg (lbs)

X = 0 (RAL 7030)

Length
Part No.
mm
CP
(inches)

CP 6508.0X0
on Optipanel support
plate B
CP 6508.100

962
6510.210
(37.87)
10 – 20
(22.05 - 44.09) 1032
6510.260
(40.63)

X = 1 (RAL 7024)

Other enclosures with
mounting cutout C
for connection console
see page 108 – 109

958
6510.310
(37.72)
19 – 30
(41.89-66.14) 1028
6510.360
(40.47)

L

See page 100 – 101
T1
4.1

6.1
T1

A
T3 support arm bracket 90° CP-L

C

5.1

1.6 Enclosure attachment,
tilting, top mounting*

X
T1

T1 Support section CP-L

2.1

1.1 Mounting cutout CP-L, round

1.1

2.1 Tilting adaptor, 10° CP-L, round

3.4
3.5

RAL 7024

Assembly example:
3.1

B

IW 6902.670, see page 91
S

X

L

CPS
s. p.
85

x = 350 mm (13.78
)

3.1 Enclosure attachment CP-L, round
4.1 Angle piece 90° CP-L
5.1 Intermediate hinge CP-L
6.1 Wall/base mounting CP-L

Color RAL

Part No. CP

7035

6519.000

9006

6519.010

See page 102
98

Vesa 75

L

L

S

* May also be used rotated through
180°, e.g. from CP-L rectangular or
CP-S to CP-L round.
Systems for the human/machine interface

Support arm system CP-L
2

Tilting adaptor

3 Enclosure
attachments

2.1 Tilting adaptor 10°
CP-L, round
CP 6527.0X0, see page 111

5

3.1 Enclosure attachment
CP-L round
3.1
3.2
3.3

Intermediate hinge

5.1 Intermediate hinge
CP-L
4
5
6

CP 6525.5X0, see page 106

CP 6523.0X0, see page 114

4.1
6.1
6.2

L

L

L

2.2 Tilting adaptor
+/– 45°
CP-L, round

L

3.2 Housing coupling
CP-L, round
CP 6525.0X0, see page 109

CP 6529.0X0, see page 112
L

4.1
4.3
6.1
6.2
6.3*
6.4*

L

6

4.1 Angle piece 90°
CP-L

3.3 Angle coupling 90°
CP-L, round

L

4 Angle
components

CP 6526.0X0, see page 112

CP 6524.0X0, see page 115

5
6

4.2 Angle joint 90°
CP-L

3.4
3.5
3.6

CP 6525.6X0, see page 106

4.1
4.2
4.3
5.1
6.1
6.2
6.3*
6.4*

L

2.4 Enclosure attachment,
tilting, top mounting*

CPXL

CP 6522.0X0, see page 114

s. p.
118
119

L

3.5 Housing coupling
CP-L, rectangular
3.4
3.5

CP 6525.1X0, see page 109

IW 6902.670, see page 91

4.1
6.1
6.2
6.3*
6.4*

6.4 Wall mounted hinge
CP-L

CPS

L

6.3 Top mounted joint
CP-L

4.3 Angle adaptor 90°
CP-L to CP-XL
CP 6528.100, see page 103

L

S

CP 6520.0X0, see page 105

3.4 Enclosure attachment
CP-L, rectangular

L

RAL 7024

CP 6520.5X0, see page 105

6.2 Wall/base mounting,
large, CP-L

CP 6524.2X0, see page 113

CP 6527.1X0, see page 111

6.1 Wall/base mounting,
small, CP-L

4.1
5
6

L

2.3 Tilting adaptor 10°
CP-L, rectangular

System end

CP 6521.0X0, see page 113

s. p.
85
L
Vesa 75

L

L

L

S

* May also be used rotated through
180°, e.g. from CP-L rectangular or
CP-S to CP-L round.

3.6 Enclosure attachment
CP-L, rectangular,
locatable
CP 6525.2X0, see page 107

4.2
5.1
6.1
6.2

Notes:
Regarding T2
Support arm, height adjustable should always be inserted as the
first horizontal component after the enclosure.
Regarding 5.1 / 6.3 / 6.4
It is always advisable to use only one intermediate hinge or one
wall mounted hinge. Two joints will restrict load capacity and make
positioning the Command Panel more difficult.

L

Regarding 4.1
Two angle pieces may also be used together.

* via T3 support arm bracket 90°
CP-L
Systems for the human/machine interface

99

Support arms systems

Fast selection

Support arm system CP-L
Support arm, height adjustable
Support arm, height
adjustable, CP-L

Version 20 kg

Version 30 kg

Overall
length Color Weight range Part No.
mm
RAL
kg (lbs)
CP
(inches)
962
10 – 20
9006
6510.210
(37.87)
(22.05 – 44.09)
958
19 – 3 0
9006
6510.310
(37.72)
(41.89 – 66.14)

Offers enhanced ergonomics thanks to:
● Adjustment range
– for tall and short operators
– for seated and standing work
adjustable to up to 800 mm (31.50
) as
required via an adjusting screw at the
front of the support arm.
● Precise counter balance of the
compression spring to the enclosure
weight via an adjusting screw at the rear
of the support arm.
● Complete functional reliabilty – if the
compression spring breaks, the arm will
remain in position.
● Plastic casing clips off for access to the
integral U-channel cable tray.
● Tilting angle of the mounted enclosure is
identical in every height position.
Material:
Steel
Configuration:
Round tube with compression spring relief
and U section cable tray, 2 threaded
connectors, plastic casing, including
installation hardware.
Note:
Connection pieces for other support arms
available on request.

56

Version 20 kg/44.09 lbs

View A
20
85

70
40

30°

M8

A

30°

A

50

400

22

22

400

800
962

34

Max. cross-section
for cable entry
16 x 15 mm (0.63
 x 1.02
)

84

Version 30 kg/66.14 lbs

View B
20

85

70

M8

30°

40

22

22

400

50

B
800
958

400

30°

B

34

Max. cross-section
for cable entry
16 x 26 mm (0.63
 x 1.02
)

100

Systems for the human/machine interface

Support arm system CP-L
Support arm, height adjustable

Enclosure side
CP-L

CP-L

90° angle piece CP-L
Part No. 6524.0X0*,
see page 115.

Support arm systems

The versatile combination options with
horizontal mounting are illustrated in this
diagram.

Attachment side
CP-L

CP-L

90° angle piece CP-L
Part No. 6524.0X0*,
see page 115.

CP-L
CP-L

CP-L
CP-L

90° articulated joint CP-L
Part No. 6524.2X0*,
see page 113.

Intermediate hinge CP-L
Part No. 6523.0X0*,
see page 114.

Enclosure

Enclosure

Angle coupling 90° CP-L, round
Part No. 6526.0X0*,
see page 112.

Wall/base mounting, small,
CP-L
Part No. 6520.5X0*,
see page 105.

Enclosure

Enclosure attachment CP-L, round
Part No. 6525.5X0*,
see page 106.
Enclosure with rear
support arm cutout/
reinforcement available on request

Wall mounted hinge CP-L
Part No. 6521.0X0*,
see page 113.

CP-S

CP-S

Angle adaptor 90°
CP-L to CP-S
Part No. 6501.080 (RAL 7030),
Part No. 6501.090 (RAL 7024),
see page 89.

Top mounted joint CP-L
Part No. 6522.0X0*,
see page 114.

* Key:
X = 0 RAL 7030
X = 1 RAL 7024
Systems for the human/machine interface

101

Support arm system CP-L
Aluminum
Support arm section
CP-L
For assembling a support arm system. The
connection components are attached to the
support section parts with self-tapping
screws, which means that the support
section can be cut to any required length.
Material:
Extruded aluminum section
Note:
Load information, see page 96.

Length
mm
(inches)
250
(9.84)
500
(19.69)
1000
(39.37)
2000
(78.74)

Weight
kg (lbs)
1.3
(2.87)
2.6
(5.73)
5.1
(11.24)
10.2
(22.49)

RAL 7035 RAL 9006
Part No.
Part No.
CP
CP
6509.000

6509.010

6511.000

6511.010

6513.000

6513.010

6515.000

6515.010

US patent no. 5,460,894
German patent no. 43 31 124
French patent no. 94 10 806
Ital. patent no. 01275022
Jap. patent no. 2730621

(35)

Ø 7.45

85

40

8

34
50

Support arm angle 90°
CP-L
The alternative for configuring compact
support arm systems ensures easier
assembly and an improved visual
appearance, particularly in conjunction
with the small wall/base mounting
(CP 6520.5X0). Attachment of the support
arm components on the bracket is
achieved using self-tapping screws, which
means that the support section can be cut
to any length.

Color
RAL
7035
9006

Weight
kg (lbs)
3.4 (7.50)
3.4 (7.50)

Part No.
CP
6519.000
6519.010

Accessories:
Wall/base mounting, small (CP 6520.5X0),
see page 105.

350

Material:
Extruded aluminum section

392.5

50

350

85

7.45

40

69

(265)

34

102

Systems for the human/machine interface

Support arm system CP-L
Angle adaptor 90°
CP-L to CP-S

A

55.5

Configuration:
Seal and self-tapping screws for CP-L and
clamping screws for CP-S support section
attachment.

Ø 40
75

View A
156

Note:
Mounting component for signal pillar
available on request.

Part No.
CP
6501.080
6501.090

47.5

Material:
Cast aluminum

Weight
kg (lbs)
1.0 (2.20)
1.0 (2.20)

69

The connecting component between:
● the horizontal support section CP-L and
● the vertical support section CP-S
Outlet optionally at the top or bottom if this
configuration is chosen for static or visual
reasons. The removable cover ensures
easier cable entry.

106

Color
RAL
7030
7024

71

Angle adaptor 90°
CP-XL to CP-L

Color
RAL
7030

The connecting component between:
● horizontal support section CP-XL and
● vertical support section CP-L
Outlet optionally at the top or bottom if this
configuration is chosen for static or visual
reasons. The removable cover ensures
easier cable entry.

Weight
kg (lbs)
1.7 (3.75)

Removable cover

56

49

35

49

56

78

191

Material:
Cast aluminum
Configuration:
Seals and self-tapping screws for CP-L /
CP-XL support section attachment.

Part No.
CP
6528.100

96

34

57

69
110

Systems for the human/machine interface

103

Support arms systems

Aluminum

Support arm system CP-L
Aluminum
Connection adaptor
CP-L to CP-XL
For mounting between:
● Enclosure with support arm connection
CP-L
and
● Support arm system CP-XL.
May also be used for the attachment of
Command Panels with cutout for CP-L
directly to machines and systems without a
support arm.
Assembly sequence:
● Mount the connection adaptor on the
supporting structure
● Mount the enclosure and tighten the
screws

Height
Part No.
mm
CP
(inches)
0.6 (1.32) 7030 20 (0.78)1) 6528.000
0.7 (1.54) 7030 55 (2.17)2) 6528.500
1) Provided the load permits, may also be
mounted between the enclosure with
support arm connection CP-XL and
support arm system CP-L.
Weight
kg (lbs)

2)

Color
RAL

For Command Panel VIP 6000,
see page 22 – 23
3.1 Command Panel, design
code number 1 to 5.
70

7

The seal to the supporting structure is
available on request, if required.
Material:
Cast aluminum
Configuration:
Seal and installation hardware.
M6
82
112

5

Ø 160
20

45°
Ø 130

70

M

6

7

82
112

5

Ø 160

55

20

45°

Ø 130

104

Systems for the human/machine interface

Support arm system CP-L
Wall/base mounting, small,
CP-L

Color
RAL
7030
7024

For rigid attachment of the support arm
system to vertical or horizontal surfaces.
Particularly suitable for the configuration of
compact support arm systems with cable
infeed from the inside.

Weight
kg (lbs)
0.6 (1.32)
0.6 (1.32)

Support arms systems

Aluminum
Part No.
CP
6520.500
6520.510

11

Material:
Cast aluminum

85

8.5

34

130

69

18

Configuration:
Seals, adjustment set for support section
and self-tapping screws for CP-L support
section attachment.

25

39

0
11

51

Mounting cutout

90°

Ø1
10

B

alternative Ø 52

A
Ø 11/M10

A = max. 52
B = max. 70

Wall/base mounting, large,
CP-L

Color
RAL
7030
7024

For rigid attachment of the support arm
system to vertical or horizontal surfaces
with cable feed from the inside.
Material:
Cast aluminum
Configuration:
Seals, opportunity for adjustment with grub
screws and self-tapping screws supplied
loose for CP-L support section attachment.

Weight
kg (lbs)
1.9 (4.19)
1.9 (4.19)

Part No.
CP
6520.000
6520.010

Accessories:
Pillar,
see page 148.

85

205

Removable
plate

22.5°

115

115
24
Adjusting screws

Removable
plate

Mounting cutout

75

150

70 – 110

75

Ø 11/ M 10

35 – 65
60

Systems for the human/machine interface

105

Support arm system CP-L
Aluminum
Enclosure attachment
CP-L, round

Color
RAL
7030
7024

For rigid fastening of the enclosure to the
support arm system.

Weight
kg (lbs)
1.0 (2.20)
1.0 (2.20)

Part No.
CP
6525.500
6525.510

Material:
Die-cast zinc
Configuration:
Seals and self-tapping screws for CP-L
support section attachment.

34

40

130

82

28

23

70

82

Mounting cutout
Enclosure CP-L, round

7

Enclosure attachment
CP-L, rectangular

Color
RAL
7030
7024

For rigid fastening of the enclosure to the
support arm system.

Weight
kg (lbs)
1.0 (2.20)
1.0 (2.20)

Part No.
CP
6525.600
6525.610

Material:
Die-cast zinc
Accessories:

Configuration:
Seals and self-tapping screws for CP-L
support section attachment.

Connection console CP-L, rectangular,
see page 108.

70

90

65

40

M6

For mounting the enclosure on the
support section CP-L optionally

63

41

95

Mounting cutout
Enclosure CP-L, rectangular

20

40

55

8.5

34

34

7

50
40

95

Ø 60

100

alternative max. ∅ 55

120

106

Systems for the human/machine interface

Support arm system CP-L
Enclosure attachment,
locatable CP-L, rectangular
For rigid fastening of the enclosure to the
support section.
With “lock holes” for easy, secure mounting
by just one person:
● Screw the enclosure attachment to the
support arm.
● Secure the supporting plate to the inside
of the enclosure and pre-fit two screws
from the outside.
● Locate the enclosure and tighten the
screws.

Color
RAL
7030
7024

Weight
kg (lbs)
0.4 (0.88)
0.4 (0.88)

Part No.
CP
6525.200
6525.210

Additional parts
90° articulated joint CP-L,
see page 113.

Suitable for super-slimline enclosures from
a depth of 70 mm (2.76
). The design also
allows the entry of cables with connectors.
Material:
Enclosure attachment: Die-cast zinc
Support plate: Sheet steel

65

18

34

Configuration:
Seal, support plate and installation
hardware.

8.5
69
72
Ø 80

21

40

18

11

Ø 121

95

Mounting cutout
Enclosure

20

55

40

Ø7

50
95
100

Systems for the human/machine interface

Alternative
max. ∅ 55

107

Support arms systems

Aluminum

Support arm system CP-L
Aluminum
Connection console
CP-L, rectangular

Color
RAL
7030
7024

For rear connection of slimline Command
Panels to support arm system CP-L.
Removable cover for easy cable entry.
Material:
Cast aluminum

Weight
kg (lbs)
0.7 (1.54)
0.7 (1.54)

Part No.
CP
6508.000
6508.010

Additional parts

Configuration:
Seals and installation hardware for
mounting on the enclosure and 2 cable
ties.

Enclosure attachment CP-L, rectangular,
see page 106.
Housing coupling CP-L, rectangular,
see page 109.
Tilting adaptor, 10° CP-L, rectangular,
see page 111.
Accessories:
Spacer plate (CP 6508.200), available on
request.
Support plate Optipanel CP 6508.100,
see page 109.

Mounting options
1. For retrofitting* to the Optipanel
In conjunction with the required support
plate (see page 109), the connection
console is screw-fastened directly to the
Optipanel enclosure section. This ensures
a stable connection, and the rear panel/
door is removable.

Support arm component
CP-L, rectangular

Connection console
Support plate (inside)

* When selecting according to design code
number (see page 49, item 2.3, selection
7 ), the connection console and support
plate are already included in the
configuration, and the rear panel and door
are equipped with the appropriate cutout.

View A
75

10.5

35

130

95

73.5

89

30.5

38

A

7

49

40

2. For other enclosures
e.g.
● Terminal boxes
(see HB 30, page 48/49),
● Cast aluminum enclosures
(see HB 30, page 40/41)
the connection console may be mounted
a) directly, flush with
the enclosure edge,
b) with spacer plate CP 6508.200
(available on request)
on the rear panel of the enclosure.
Reinforcement of the rear panel should be
checked in individual cases.

Support arm component
CP-L rectangular

Connection console

Support arm component
CP-L rectangular

Connection console

Spacing plate

Mounting cutout

63

7

21.5

30.5 27.5

89

10.5

60
6

90

6
30
133

108

Systems for the human/machine interface

Support arm system CP-L
Optipanel support plate
For mounting on the enclosure section.
The rear panel or door are recessed in this
area, thereby ensuring easy access in case
of servicing.

Weight
kg (lbs)
0.2 (0.44)

Support arms systems

Aluminum
Part No.
CP
6508.100

Material:
Cast aluminum
Configuration:
Seals and installation hardware.

For swivel mounting of the enclosure on the
vertical section of the support arm system.

Color
RAL
7030
7024

Weight
kg (lbs)
1.7 (3.75)
1.7 (3.75)

Rotation range:
Approx. 350 °, lockable via clamping lever.
By inserting additional tension pins
5 x 18 mm (0.20
 x 0.71
) to ISO 8752, the
rotation range may be limited to ±5°, 65°,
95° and 155°.

Part No.
CP
6525.000
6525.010

50

35

Material:
Die-cast zinc

40

Housing coupling
CP-L, round

Ø 130

Configuration:
Seals and self-tapping screws for CP-L
support section attachment.

70

82

Mounting cutout
Enclosure CP-L, round

7

Housing coupling
CP-L, rectangular
For swivel mounting of the enclosure on the
vertical section of the support arm system.
Rotation range:
Approx. 350 °, lockable via clamping lever.
By inserting additional tension pins
6 x 20 mm (0.24
 x 0.79
) to ISO 8752, the
rotation range may be limited to ±5° and
±100°.

Color
RAL
7030
7024

Weight
kg (lbs)
1.4 (3.09)
1.4 (3.09)

Part No.
CP
6525.100
6525.110

Accessories:
Connection console CP-L, rectangular,
see page 108.

Material:
Die-cast zinc

70

90
Ø 60

55

Ø 69

40

Configuration:
Seals and self-tapping screws for CP-L
support section attachment.

40

M6

82

60

95

Mounting cutout
Enclosure CP-L,
rectangular

120

8.5

20

55

40

7

34

50
95
100

Systems for the human/machine interface

16
alternative max. ∅ 55

34

109

Support arm system CP-L
Aluminum
Enclosure attachment, tilting,
bottom-mounting CP-L,
rectangular
For mounting beneath:
● IW worktop with pedestal
● Sufficiently large surfaces.
To fit enclosures with mounting cutout:
● CP-L, rectangular (e.g. Optipanel)
see page 80.
With mounting cutout for connector
grommet for sealed cable entry.

Color
RAL
7024

Weight
kg (lbs)
1.6 (3.53)

Part No.
CP
6902.640

Accessories:
Connector grommet,
see page 220.
IW worktop with pedestal,
see page 162 – 163.

Tilt angle:
+40°/–40°, lockable via clamping lever
Material:
Sheet steel, painted
Configuration:
Installation hardware

70

The enclosure attachment can be mounted
either on the support arm connection of the
Optipanel enclosure or on the underside or
rear of any enclosure.

+ 40

° – 40°

B

211

171

66

Worktop

23

35

35
A

A = min. 101
B = max. 62

Prepared for enclosure with
connection CP-L, rectangular
or connection console CP-L
CP 6508.0X0

M6

95

145

42.5

Prepared for
connector gland
SZ 2400.300 /
SZ 2400.500

22.5

40

110

Systems for the human/machine interface

Support arm system CP-L
Tilting adaptor 10°
CP-L, round

Color
RAL
7030
7024

For mounting between:
● Housing coupling CP-L, round
(CP 6525.0X0)
or
● Enclosure attachment CP-L, round
(CP 6525.5X0)
or
● Angle coupling 90° CP-L, round
(CP 6526.0X0)
and the Command Panel.

Weight
kg (lbs)
0.6 (1.32)
0.6 (1.32)

Material:
Die-cast zinc

Part No.
CP
6527.000
6527.010

35

Configuration:
Seal and installation hardware.
10°
70

12

130

70

82

Mounting cutout
Enclosure CP-L

7

Tilting adaptor 10°
CP-L, rectangular

Color
RAL
7030
7024

For mounting between:
● Housing coupling CP-L, rectangular
(CP 6525.1X0)
or
● Enclosure attachment CP-L, rectangular
(CP 6525.6X0)
and the Command Panel.

Weight
kg (lbs)
0.4 (0.88)
0.4 (0.88)

Part No.
CP
6527.100
6527.110

Material:
Die-cast zinc
Configuration:
Seal and installation hardware.
70

65

40

Ø

6.6

65

14

M6

10°
(25)

95
Ø 120

Mounting cutout
Enclosure

20

55

40

7

50
95
100

Systems for the human/machine interface

alternative max. ∅ 55

111

Support arms systems

Aluminum

Support arm system CP-L
Aluminum
Ø 130

Tilting adaptor ± 45°
CP-L, round

Ø 82
Ø 70
M6

For mounting between:
● Housing coupling CP-L, round
(CP 6525.0X0)
or
● Enclosure attachment CP-L, round
(CP 6525.5X0)
or
● 90° angle coupling (CP 6526.0X0)
and the Command Panel.

107

45°

Tilting angle:
Adjustable in 7.5° increments
Material:
Cast aluminum

Mounting cutout
Enclosure CP-L

Part No.
CP
6529.000
6529.010

70

Weight
kg (lbs)
1.3 (2.87)
1.3 (2.87)

7

Color
RAL
7030
7024

82

Configuration:
Seal, plastic bellows section and
installation hardware.

US patent no. 5,911,393
German patent no. 195 40 298

75

50

50

130

Rotation range:
Approx. 350°.
By inserting additional tension pins
5 x 18 mm (0.20
 x 0.71
) to ISO 8752 the
rotation range may be limited to ±5°, 65°,
95° and 155°.

93

For swivel mounting of the enclosure
on the horizontal part of the support arm
system. Enclosure may be suspended or
top-mounted.
The removable plate enables problem-free
cable entry.

157

85

Removable plate

Angle coupling, 90°
CP-L, round

Material:
Aluminum/die-cast zinc

Part No.
CP
6526.000
6526.010

70

Weight
kg (lbs)
1.9 (4.19)
1.9 (4.19)

7

Color
RAL
7030
7024

Mounting cutout
Enclosure CP-L
82

Configuration:
Seals, adjustment set and self-tapping
screws for CP-L support section
attachment.

Accessories:
Mounting component for signal pillars
(SZ 2375.000),
see page 115.

112

Systems for the human/machine interface

Support arm system CP-L
34

Angle joint 90°
CP-L

40

The swivel connection between horizontal
and vertical support sections.
With very slimline enclosures, there is no
need for the deep housing coupling. With
the shallow enclosure attachment
(CP 6525.2X0), the support section may
also be attached with its wide side.

5

Rotation range:
Approx. 325°.
Option of limiting the rotation range via the
use of additional tension pins 5 x 18 mm
(0.20
 x 0.71
) to ISO 8752 to ±54° and
±98°.

76

151

85

Removable
plate

22

Material:
Aluminum/die-cast zinc
Configuration:
Seals, self-tapping screws for support
section attachment and adjustment set.
Weight
kg (lbs)
1.2 (2.65)
1.2 (2.65)

50

Part No.
CP
6524.200
6524.210

Ø

90

43
50

Color
RAL
7030
7024

Support arms systems

Aluminum

48

Additional parts
Enclosure attachment, locatable, CP-L,
rectangular (CP 6525.2X0), see page 107
or enclosure attachment CP-L, rectangular
(CP 6525.6X0), see page 106.

Removable plate

288

139



146

Rotation range:
Approx. 350°.
Option of restricting the rotation range in
60° increments and adjusting the mobility
of the joint with the screws supplied loose.
To lock the joint, the screw for adjusting
rotatability 
 may be exchanged for
standard locking lever M8 x 16.

81

For vertically hinged mounting of the
support arm on vertical surfaces. The
removable plates facilitate problem-free
cable routing or cable entry.

85

Wall mounted hinge
CP-L

Removable plate

121

Part No.
CP
6521.000
6521.010

126

Mounting cutout
Ø 11/ M 10

60

Weight
kg (lbs)
3.2 (7.05)
3.2 (7.05)

Ø 46 – 55

Color
RAL
7030
7024

50

Configuration:
Seals, adjustment via grub screws and selftapping screws for CP-L support section
attachment.

115

Material:
Cast aluminum

60

Accessories:
Pillar, see page 148.
Mounting component for signal pillars
(SZ 2375.020), see page 115.

Systems for the human/machine interface

US patent no. 5,522,118
German patent no. 44 03 593
French patent no. 94 10902
Ital. patent no. 01274751
Japanese patent no. 2 675 264

113

Support arm system CP-L
Aluminum
Top mounted joint
CP-L




12

180
111

Ø 46

Rotation range:
Approx. 350°.
Option of restricting the rotation range in
60° increments and adjusting the mobility
of the joint with the screws supplied loose.
To lock the joint, the screw may be
exchanged for standard clamping lever
M8 x 16.

Ø 170

50

Ø 115

58

Ø 150

For swivel mounting of the support arm
system on horizontal surfaces – also
suitable for suspending from the ceiling.
The removable plate enables simplified
cable entry.

85

Removable plate

Material:
Cast aluminum
Configuration:
Seals, adjustment set and self-tapping
screws for CP-L support section
attachment.

Ø 11

Note:
Not suitable for attaching directly to
enclosures.

Ø 11/M10

Part No.
CP
6522.000
6522.010

Ø 150

Weight
kg (lbs)
3.0 (6.61)
3.0 (6.61)

Ø 50 – 90

Color
RAL
7030
7024

Mounting cutout

Accessories:
Pillar,
see page 148.
Mounting component for signal pillars
(SZ 2375.020),
see page 115.


 Screw for adjusting rotatability

Intermediate hinge
CP-L

Rotation range:
Approx. 350°.
Option of restricting the rotation range in
60° increments with the screws supplied
loose.



146.5

285

For vertically hinged connection of
horizontal support sections within the
support arm system. The removable plates
ensure simple cable entry.

85

Removable plate




Material:
Cast aluminum

Removable plate

Weight
kg (lbs)
3.2 (7.05)
3.2 (7.05)

Part No.
CP
6523.000
6523.010

Accessories:
Mounting component for signal pillars
(SZ 2375.020), see page 115.

114

50

Color
RAL
7030
7024

115

Configuration:
Seals, adjustment set and self-tapping
screws for CP-L support section
attachment.

116
126


 Screw for adjusting rotatability
US patent no. 5,522,118
German patent no. 44 03 593
French patent no. 94 10902
Ital. patent no. 01274751
Japanese patent no. 2 675 264

Systems for the human/machine interface

Support arm system CP-L
Angle piece 90°
CP-L

Support arms systems

Aluminum

For connecting horizontal and vertical
support arm components.
The removable plate ensures easier cable
entry.

85

Removable plate

45°

Material:
Die-cast zinc

47.5
62.5

Configuration:
Seals, adjustment set and self-tapping
screws for CP-L support section
attachment.
Part No.
CP
6524.000
6524.010

75

Weight
kg (lbs)
1.4 (3.09)
1.4 (3.09)

50

Color
RAL
7030
7024

126

Accessories:
Mounting component for signal pillars
(SZ 2375.000),
see below.
US patent no. 5,533,763
German patent no. 43 31 125
French patent no. 94 10901
Italian patent no. 012 74 738
Japanese patent no. 2 809 993

Mounting component
CP-L
for signal pillars
For mounting a signal pillar with connection
component for conduit mounting on
support arm system CP-L.
Material:
Sheet steel
Mounting
component Color Weight Part No.
CP-L
RAL kg (lbs)
CP
to fit
Angle piece
(CP 6524.0X0)
0.4
2375.000
9017
(0.88)
Angle coupling
(CP 6526.0X0)
Intermediate
hinge
(CP 6523.0X0)
Wall mounted
2375.020
0.4
9017
hinge
(0.88)
(CP 6521.0X0)
Top mounted
joint
(CP 6522.0X0)

Accessories:
Signal pillars,
see HB 30 from page 1004.

Systems for the human/machine interface

115

Support arm system CP-XL . . .
. . . for high loads

CP-XL

CP-XL

Material:
Aluminum

Material:
Aluminum

Design:
Solid

Design:
Open

There is a choice of 2 profile designs:
● Solid for high torsion loads (particularly
when using an intermediate hinge)
● Open for simple cable entry
Both have two integral “cable ducts” for
separate cable routing e.g. of power and
control lines.

155

The couplings and joints have a
maintenance-free friction bearing.
Tilting adaptors, enclosure attachments
and couplings may optionally be mounted
on the top or bottom of the enclosure.
These components are not suitable for
use as the base point of a support arm
system. For the swivel configuration we
recommend the pillar with corresponding
components.

80

80

Load capacity CP-XL:

Permissible load depending on system assembly
Intermediate hinge CP 6120.000 should only be used once per
system!

A+B
Permissible static load [N]

1600

1300

800
650
550
400

C
0
1000

0

2000

3000

Arm length [mm]

A: Open and solid support section

CP 6110.000,
CP 6160.000,
CP 6170.000

static
load

CP 6110.000,
CP 6160.000,
CP 6170.000

C: Open support section

static
load
CP 6120.000

CP 6110.000,
CP 6160.000,
CP 6170.000

static
load
CP 6120.000

CP 6180.000

CP 6180.000

CP 6180.000

CP 6140.000

CP 6140.000

CP 6140.000

static
load

116

B: Solid support section

static
load

static
load

Systems for the human/machine interface

Support arm system CP-XL
2

118 – 127

Fast selection

118 – 119

CP-XL components

120 – 127

Support arms systems

5
1
3

8

4

6

1

Self-tapping screws facilitate simple,
fast assembly of the support arm
without the need for time-consuming
thread-tapping.

2

Extruded groove to accommodate the
clip-on cover with open support section
CP-XL (included in the configuration of
the support section).

3

Intermediate hinge for vertically hinged
connection of horizontal support
sections within the support arm system.

4

Extruded aluminum section of high
bending resistance with a high loadbearing capacity and an attractive
design.

5

Section open on one side, enabling
easy installation of pre-assembled
cables.

6

Housing coupling for connecting the
support section to the enclosure
facilitates an infinitely adjustable
enclosure rotation range of
approximately 350°.

7

Connection adaptor VIP 6000
(installation depth 155 mm (6.10
),
185 mm (7.28
) and 295 mm (11.61
))
on CP-XL support arm.

8

90° angle piece for a stable connection
between support arm sections; the
design permits problem-free insertion of
pre-assembled cables.

9

A high load capacity and a stylish
design are combined, thanks to the
connections of systems CP-L and
CP-XL with the 90° angle adaptor.

7

9

10

10 The CP-XL system is also used in
shallow enclosures with CP-L
connection. The CP-L/CP-XL
connection adaptor makes the
connection.

117

Support arm system CP-XL
Fast selection
It’s so easy!

T

Make a simple sketch showing the basic
form of the support arm. Next, select the
corresponding support arm components.
Start at 1 “system start” by selecting the
enclosure situation which best describes
your requirements.

Support sections

1

System start

All options see page 80 – 81
T1 Support section CP-XL,
open

1.1 Mounting cutout
CP-XL
2
3
XL

1.2 Connection plate
CP-XL

Continue with CP-XL according
to the item numbers.
System continuation/system
end:
all directions

vertical

CP 6528.300 (RAL 7030)

Length
mm
(inches)

Color
RAL

Part No. CP

500
(19.69)

7035

6050.000

1000
(39.37)

7035

6100.000

2000
(78.74)

7035

6200.000

see page 219

XL

See page 120
XL

horizontal
T2 Support section CP-XL,
sealed

around a corner

1.3 Connection adaptor
CP-L to CP-XL
CP 6528.000 (RAL 7030)
see page 121

rotatable components

XL

From item 3 a support section
is required between each
component (minimum length
approx. 100 mm (3.94
), for
wall/floor mounting approx.
160 mm (6.30
)).
The cross-sections indicate the
installation position(s).

Length
mm
(inches)

Color
RAL

Part No. CP

500
(19.69)

7035

6050.500

1000
(39.37)

7035

6100.500

2000
(78.74)

7035

6200.500

See page 120

L

1.4 Connection adaptor
CP-L to CP-XL
for VIP 6000 enclosures
with installation depths
155, 185 and 295 mm
(6.10
, 7.28
 and 11.61
)
CP 6528.500 (RAL 7030)
see page 121
XL

4.1

L

T1

5.1

T1

6.1

T1

Assembly example:
3.1
2.1

T1 Support section CP-XL, open
1.1 Mounting cutout CP-XL

1.1

2.1 Tilting adaptor 10° CP-XL
3.1 Enclosure attachment CP-XL, round
4.1 Angle piece 90° CP-XL, outlet at

bottom
5.1 Intermediate hinge CP-XL
6.1 Wall/base mounting CP-XL

118

Note:
● Only insert one intermediate hinge
● Two angle pieces may also be used one
after the other.
● With angle pieces, take care to ensure
correct positioning of the support section
cable duct

Systems for the human/machine interface

Support arm system CP-XL
Fast selection
Tilting adaptor

3 Enclosure
attachments

2.1 Tilting adaptor 10°
CP-XL
CP 6023.000 (RAL 7030)
see page 123

4 Angle
components

3.1 Enclosure attachment
CP-XL, round
3

CP 6130.600 (RAL 7030)
see page 122

4
5
6.1

4.1 Angle piece 90°
CP-XL, outlet at top
CP 6180.000 (RAL 7030)

6

5
6

System end
Support arm systems

2

6.1 Wall/base mounting
CP-XL
CP 6160.000 (RAL 7030)

see page 127

see page 122

4.2 Angle piece 90°
CP-XL, outlet at
bottom

6.2 Top mounted joint
CP-XL

CP 6140.000 (RAL 7030)
see page 127

see page 125

XL

XL

XL

2.2 Tilting adaptor
25° / 60° CP-XL

3.2 Enclosure attachment
CP-XL, rectangular

CP 6150.000 (RAL 7030)

CP 6130.500 (RAL 7030)

see page 124

see page 122

CP 6170.000 (RAL 7030)

XL

XL

XL

XL

3.3 Housing coupling
CP-XL
CP 6130.000 (RAL 7030)
see page 123

6.3 Wall mounted hinge
CP-XL
5

Intermediate hinge

CP 6110.000 (RAL 7030)
see page 125

5.1 Intermediate hinge
CP-XL
CP 6120.000 (RAL 7030)

4
6

see page 126

XL

3.4 Angle coupling 90°
CP-XL
CP 6040.000 (RAL 7030)
see page 124

XL

Systems for the human/machine interface

119

Support arm system CP-XL
Aluminum
80
15

Support arm section
CP-XL, open
For assembling a support arm system.
The connection components are attached to
the support section parts with self-tapping
screws, which means that the support
section can be cut to any required length.
With open cable duct, for easy servicing
access and for pre-assembled cables; with
connector easily locked via clip-in lid.

18.5

50

Configuration:
Clip-in lid
Length
mm (inches)
500 (19.69)
1000 (39.37)
2000 (78.74)

45

7.45

5.7

Material:
Extruded aluminum section

3

155

10.6

54

Color
Weight
Part No.
RAL
kg (lbs)
CP
7035 4.9 (10.80) 6050.000
7035 9.8 (21.61) 6100.000
7035 19.6 (43.21) 6200.000

64
80

Accessories:
Adjustment set for support section, see
below.
Note:
Load information, see page 116.

Support arm section
CP-XL, solid

Material:
Extruded aluminum section

50

155

3

76

10.5

52

45

7.45

5.7

The alternative solution for higher loads
and torsion compared with the support
section CP-XL, open.
The connection components are attached
to the support section parts with selftapping screws, which means that the
support section can be cut to any required
length.

18.5

54
64
80

Length
mm (inches)
500 (19.69)
1000 (39.37)
2000 (78.74)

Color
Weight
Part No.
RAL
kg (lbs)
CP
7035 5.5 (12.13) 6050.500
7035 11.0 (24.25) 6100.500
7035 22.0 (48.50) 6200.500

Accessories:
Adjustment set for support section, see
below
Note:
Load information, see page 116.

Adjustment set for support
section CP-XL
The adjustment set permits alignment of
the CP support section after installation.
Material:
Sheet steel 1.0 mm (19 ga), zinc-plated.
PU
10

120

Part No. CP
6205.000

Systems for the human/machine interface

Support arm system CP-XL
57

49

Configuration:
Seals and self-tapping screws for CP-L and
CP-XL support section attachment.

34

Weight
kg (lbs)
1.7 (3.75)

69

96

110

Removable cover

Material:
Cast aluminum

Color
RAL
7030

Part No.
CP
6528.100

70

Connection adaptor
CP-L to CP-XL

7

For mounting between
● Enclosure with support arm connection
CP-L
and
● Support arm system CP-XL.
Material:
Cast aluminum

M6
82

Configuration:
Seal and installation hardware.

112

Ø 160

Part No.
CP

5

Weight
kg (lbs)

45°

20

Color
RAL

Ø 130

7030

0.5 (1.1)

7030

0.7 (1.54) 6528.500

6528.000
70

7

Height
mm
(inches)
20
(0.79)1)
55
(2.17)2)

78

191

56

The connecting component between:
● horizontal support section CP-XL and
● vertical support section CP-L
Outlet optionally at the top or bottom if this
configuration is chosen for static or visual
reasons. The removable cover ensures
easier cable entry.

56

35

Angle adaptor 90°
CP-XL to CP-L

1) Provided

M

6

the load permits, may also be
mounted between enclosure with support
arm connection CP-XL and support arm
system CP-L.
2) For Command Panel VIP 6000
see page 22/23
3.1 Command Panel, design
code number 1 to 5 .

82
112

5

Ø 160

55

20

45°

Ø 130

Systems for the human/machine interface

121

Support arms systems

Aluminum

Support arm system CP-XL
Aluminum
70

Wall / base mounting
CP-XL

37
45°

33

165

140

55

Mounting cutout

14 / M12

Accessories:
Pillar, see page 148.

70
140

180

Enclosure attachment
CP-XL, round

112
22

64

32 18

For rigid external mounting of enclosures
to:
● Support section
● Tilting adaptor 10° (CP 6023.000)
● Tilting adaptor 25°/60° (CP 6015.000).
Material:
Die-cast zinc
Configuration:
Seals and self-tapping screws for CP-L
support section attachment.
Color
RAL
7030

Weight
kg (lbs)
1.6 (3.53)

Part No.
CP
6130.600

18
32

160

Material:
Die-cast zinc
Configuration:
Seals and self-tapping screws for CP-L
support section attachment.
Part No.
CP
6130.500

25

64

Ø 112

For direct external mounting on the
enclosure.

Weight
kg (lbs)
1.2 (2.65)

25

54
100

Enclosure attachment
CP-XL, rectangular

Color
RAL
7030

55

18

40
14

140

80

Part No.
CP
6160.000

50

75

Weight
kg (lbs)
4.1 (9.1)

80

174

Configuration:
Seals and self-tapping screws for CP-L
support section attachment.

40

30

Material:
Spheroidal graphite cast iron

Color
RAL
7030

65

For rigid attachment of the support arm
system to vertical or horizontal surfaces.

22

54
130

Mounting cutout
Enclosure CP-XL

100

7

2

11

122

Systems for the human/machine interface

Support arm system CP-XL
Support arms systems

Aluminum

11
2

Material:
Die-cast zinc

45°

45°

Configuration:
Seals and self-tapping screws for CP-L
support section attachment.

Ø 180

Mounting cutout
Enclosure CP-XL

Note:
By inserting grooved pins 5 x 12 mm
(0.2
 x 0.47
) to DIN 1474, the rotation
range may be limited in 90° increments.

100

Part No.
CP
6130.000

10°

50

10° tilting adaptor
CP-XL

2

Weight
kg (lbs)
6.8 (14.99)

7

11

Color
RAL
7030

6

Ø 100

Rotation range:
approx. 350°

M

For swivel mounting of the enclosure on the
horizontal part of the support arm system.

58

Housing coupling
CP-XL

For mounting between:
● Housing coupling (CP 6130.000)
or
● Enclosure attachment (CP 6130.600)
or
● Angle coupling (CP 6040.000)
and the Command Panel.

Ø 160

98

Material:
Die-cast zinc
Configuration:
Seals and installation hardware.
Color
RAL
7030

Weight
kg (lbs)
1.4 (3.09)

Part No.
CP
6023.000

180

Mounting cutout
Enclosure CP-XL

100

7

2

11

Systems for the human/machine interface

123

Support arm system CP-XL
Aluminum
160

75.5

25° / 60° tilting adaptor
CP-XL

25°

60

°

164.5

For mounting between:
● Housing coupling (CP 6130.000)
or
● Enclosure attachment (CP 6130.600)
or
● Angle coupling (CP 6040.000)
and the Command Panel.

210

5°

A

Material:
Cast aluminum

Weight
kg (lbs)
1.7 (3.75)

7

112

Part No.
CP
6150.000

45°

45
°

150

20

M8

Color
RAL
7030

10
0

160

Tilt 25°

Configuration:
Seals, plastic cover and installation
hardware.

140

160

View A

Tilt 60°
18

185

50

Angle coupling, 90°
CP-XL

7

89

For swivel mounting of the enclosure on the
horizontal part of the support arm system.
Enclosure may be suspended or topmounted.

Ø 100

Configuration:
Seals, plastic casing and self-tapping
screws for CP-L support section
attachment.

Weight
kg (lbs)
6.2 (13.67)

Part No.
CP
6040.000

45°

45°

Ø 180

Mounting cutout
Enclosure CP-XL
7

2

11

Color
RAL
7030

M6

100

Note:
By inserting grooved pins 5 x 12 mm
(0.2
 x 0.47
) to DIN 1474, the rotation
range may be limited in 90° increments.

11
2

Material:
Spheroidal graphite cast iron and die-cast
zinc

88

Rotation range:
approx. 350°

German patent no. 4033747
Swiss patent no. 684439
Italian patent no. 1252120

124

Systems for the human/machine interface

Support arm system CP-XL
70

Wall mounted hinge
CP-XL

65

167

80

70

45°

For vertically hinged mounting of the
support arm surface on vertical surfaces.

140

22.5

Material:
Spheroidal graphite cast iron

165

approx. 28

220

80

20

Configuration:
Seals, bellows section and installation
hardware.

14

Rotation range:
approx. 180°

Accessories:

10

Part No.
CP
6110.000

50

168

120

14 / M12

80

75

55

Mounting cutout

Pillar, see page 148.
Rotation range limiter CP-XL,
see page 126.

140

Weight
kg (lbs)
8.5 (18.74)

208

Note:
Rotation range may be reduced with
rotation range limiter CP-XL.
Color
RAL
7030

Support arms systems

Aluminum

70
140

50

Top mounted joint
CP-XL

60.5

For swivel mounting of the support arm
system on horizontal surfaces – also
suitable for suspending from the ceiling.

155

33

79

Ø 70

Configuration:
Seals and self-tapping screws for CP-XL
support section attachment.

Ø 145

Note:
Safety end stop as anti-twist protection.
Part No.
CP
6170.000

80

Weight
kg (lbs)
11.9 (26.23)

14

Color
RAL
7030

200

5

Ø

17

45°

Material:
Steel and cast iron parts with plastic cover.

31.5

Rotation range:
approx. 350°, lockable.

Accessories:
Pillar, see page 148.

175

Ø

14

(M
12
)

Mounting cutout

45°
Ø 70 + 30

Systems for the human/machine interface

125

Support arm system CP-XL
Aluminum
20

275

Intermediate hinge
CP-XL

208

For vertically hinged connection of
horizontal support sections within the
support arm system.
Rotation range:
approx. 180°
50

Material:
Spheroidal graphite cast iron

130

50

80

Configuration:
Self-tapping screws for CP-XL support
section attachment and divided bellows
section with zip for uninhibited access to
the cable duct.
Note:
Rotation range may be reduced with
rotation range limiter.
Color
RAL
7030

Weight
kg (lbs)
6.5 (14.33)

Part No.
CP
6120.000

Accessories:

120

US patent no. 4,998,702
German patent no. 3805424
European patent no. 0330029
with validity for FR, GB, IT
Jap. patent no. 1903905

Rotation range limiter CP-XL,
see below.

°

Configuration:
2 steel disks, slotted, including 3 cheesehead screws for assembly.
PU
1 set

126

Weight
kg (lbs)
0.6 (1.32)

45°
45°

45°
90°

135

°

90

Material:
Steel, zinc plated

45°

Suitable for:
● Wall-mounted hinge (CP 6110.000)
● Intermediate hinge (CP 6120.000).

Adjustable swivel area:

90

Rotation range limiter
CP-XL

°

135

°

Part No.
CP
6110.100

Systems for the human/machine interface

Support arm system CP-XL
86

Angle piece 90°
CP-XL

45°

50

Configuration:
Seals and self-tapping screws for CP-L
support section attachment.
Outlet
bottom
top

Color
RAL
7030
7030

88

20

10

Material:
Spheroidal graphite cast iron with plastic
casing

188

For connecting horizontal and vertical
support arm components.

80
10

Weight
Part No.
kg (lbs)
CP
2.4 (5.29) 6140.000
3.6 (7.94) 6180.000

US patent no. 4,997,155
German patent no. 58901106
European patent no. 0330027
with validity for FR, IT
Japanese patent no. P 1870561

10

155

20

10

50

80

45°
86

88
188

Systems for the human/machine interface

127

Support arms systems

Aluminum

INVERTED

Post top arms
Attaches to a plain end 89 mm (3.5″)
OD tube or pipe. Cables exit through
tube.

Wallmount
arms

Machine
top arms

Attaches to a vertical surface with
135 mm (5.3″) H x 152 mm (6.0″) W
mounting plate with 4 12.5 mm (0.5″) Ø
hole pattern on 121 mm (4.75″) H x 89 mm
(3.50″) W centers. 51 mm (2.0″) Ø hole
through center for cable exit. 64 mm (2.5″)
NPS threaded opening as alternate cable
exit.

Attaches to horizontal surface with
127 mm (5″) x 127 mm (5″) mounting
plate with 4 9 mm (0.37″) Ø hole
pattern on 90 mm (3.54″) centers.
38 mm (1.5″) Ø hole through center
for cable exit.

LENGTH L

Universal
arms

Vertical
extensions

Designed for increased
flexibility. Mounting method can be
easily configured based on user
requirements.

Lowers enclosure
by dimension “H”.

Horizontal
extensions
H

Increases
overall length by
dimension “L”.

TALL

UNIVERSAL AS
MACHINE TOP

UNIVERSAL AS
WALLMOUNT

Floor posts

UNIVERSAL AS
POST TOP

LENGTH L
SHORT

H

H

Jointed
extension arms
Increases overall length by
dimension “L” and adds additional swivel
joint, providing in-out motion.

128

914 mm (36″),
1880 mm (74″), or
2007 mm (79″) tall,
89 mm (3.5″) x 6 mm
(0.25″) OD post with
square base plate.
38 mm (1.5″) NPT
female coupling near
base can be used
for cable entry. Post
can be easily shortened.
Note: When using
jointed extension
arms, a 2007 mm
(79″) tall post should
be used.

Systems for the human/machine interface

Technical specifications
CP-vertical travel

CP-VL/CP-VXL

CP-V
5"

T1

5"

HORIZONTAL

T3

T
TRAVEL

T
TRAVEL

T3

T2

LENGTH L

3.0"

3.5"

CP-vertical mounting dimensions
Machine top universal mounting
.53" Ø
(4) PLACES

Post top mounting

Machine top mounting

.8"

6.4"

5.0"
4.5"

6.4"

2.0"

6.0"
TOP
OF
PIPE

3-1/2" OD TUBE
(OR) 3" PIPE
(PLAIN END)

5.0"

4.5"

1.4" Ø
CABLE EXIT

5.0"

1.4" Ø
CABLE EXIT

3.54"

4.8" Ø
CIRCUMFERENCE
3.54"

Wallmount universal mounting
.53" Ø
(4) PLACES

6.4"

1.4" Ø
CABLE EXIT

3.5"

6.4"

COVER
PLATE

4.5"

Release handles

Wallmount mounting

(9968014/9968015)
1.4" Ø
CABLE EXIT

1.4" Ø
CABLE EXIT

3/8" Ø
(4) PLACES

2 3/4"
4.0"

6.0"

5.75"

4.5"

5.3"

Post universal mounting

3.5"

.53" Ø
(4) PLACES

.8"

4.75"

9968014 = 13 1/4”
9968015 = 17 15/16"

2.2"

5.0"
TOP OF PIPE

2-1/2" NPT ALTERNATE CABLE EXIT
(THREADED CAP SUPPLIED)

3-1/2" OD TUBE
(OR) 3" PIPE
(PLAIN END)

Enclosure mounting coupling

Floor post plates

M6

12"
8"
4.5"
8"

10"

12"

6"

.50" Ø
(4) PLACES

.68" Ø
(4) PLACES

6"
10"

3" Ø ALTERNATE
CABLE ACCESS

Systems for the human/machine interface

3" Ø ALTERNATE
CABLE ACCESS

3.23"
4.41"

1.82" Ø CABLE
PASSAGE

129

CP-vertical pendant arm systems

Features and specifications:
● Adjusts to viewing height of each
operator with simple motion
● Counterbalance can be adjusted by
user for loads up to 100 lbs. (depending
on arm)
● 13″, 23″, or 30″ of vertical adjustment
● Locks and unlocks with a convenient
release mechanism
● Swivels at both ends
● NEMA Type 4, 12 sealed cable
passageway protects wiring
● All arms can be easily reconfigured
for inverted applications
● A release handle mechanism must be
ordered for each arm
● Sizes:
CP-V5″ H x 3″ W x 26″ L
CP-VL 5″ H x 3″ W x 31″ L
CP-VXL5″ H x 3″ W x 39″ L
● Arm material: Aluminum
● Finish: Powder painted aluminum,
RAL 7035 light grey
● Pivoting travel: Swivel at both ends
● Mounting styles:
Wallmount, machine top, post top,
–standard and inverted mounting
● Rotational stops: One stop per
swivel
● Cable passageway:
Sealed passageway, minimum
restriction 36 mm (1.4″) Ø
● NEMA rating: Type 4, 12
130

CP-vertical pendant arm specifications
Part No.

Description

Max. load

Vertical travel T

T1

T2

9967987

Post top/CP-V

45.36 kg (100 lbs)

330 mm (13″)

–

–

9967988

Post top/CP-VL

34.02kg (75 lbs)

584 mm (23″)

150 mm (5.9″)

434 mm (17.1″)

160 mm (6.3″)

711 mm (28″)

9967989

Post top/CP-VXL

22.68 kg (50 lbs)

762 mm (30″)

188 mm (7.4″)

574 mm (22.6″)

221 mm (8.7″)

889 mm (35″)

9967993

Wallmount/CP-V

45.36 kg (100 lbs)

330 mm (13″)

–

–

9967994

Wallmount/CP-VL

34.02kg (75 lbs)

584 mm (23″)

150 mm (5.9″)

434 mm (17.1″)

160 mm (6.3″)

711 mm (28″)

9967995

Wallmount/CP-VXL

22.68 kg (50 lbs)

762 mm (30″)

188 mm (7.4″)

574 mm (22.6″)

221 mm (8.7″)

889 mm (35″)

9967996

Machine top/CP-V

45.36 kg (100 lbs)

330 mm (13″)

–

–

9967997

Machine top/CP-VL

34.02kg (75 lbs)

584 mm (23″)

150 mm (5.9″)

434 mm (17.1″)

160 mm (6.3″)

711 mm (28″)

9967998

Machine top/CP-VXL

22.68 kg (50 lbs)

762 mm (30″)

188 mm (7.4″)

574 mm (22.6″)

221 mm (8.7″)

889 mm (35″)

9967999

Universal mount/CP-V

45.36 kg (100 lbs)

330 mm (13″)

–

–

9968000

Universal mount/CP-VL

34.02kg (75 lbs)

584 mm (23″)

150 mm (5.9″)

434 mm (17.1″)

160 mm (6.3″)

711 mm (28″)

9968001

Universal mount/CP-VXL

22.68 kg (50 lbs)

762 mm (30″)

188 mm (7.4″)

574 mm (22.6″)

221 mm (8.7″)

889 mm (35″)

Part No.

Description

9968008
9968009

Height

Base plate

102 mm (4″) Vertical extension piece

102 mm (4″)

–

203 mm (8″) Vertical extension piece

203 mm (8″)

–

305 mm (12″) Vertical extension piece

305 mm (12″)

9968011

914 mm (36″) Floor post

9968012

1880 mm (74″) Floor post

mm (8″) x
914 mm (36″) 203
203 mm (8″)
305
mm
x
1880 mm (74″) 305 mm(12″)
(12″)
mm (12″) x
2007 mm (79″) 305
305 mm (12″)

9968010

9968013

2007 mm (79″) Floor post

–

9968014

Release handle W ≤ 406 mm (16″)1)

–

–

9968015

Release handle W > 406 mm (16″)1)

–

–

9968016

Release handle for VIP1)

–

–

9968017

Universal release handle 1)

–

–

1)

Part No.
9968002
9968003
9968004
9968005
9968006
9968007

T3

Length (L)

142 mm (5.6″) 565 mm (22.25″)

142 mm (5.6″) 565 mm (22.25″)

142 mm (5.6″) 565 mm (22.25″)

142 mm (5.6″) 565 mm (22.25″)

Description
152 mm (6″) Horizontal
extension
305 mm (12″) Horizontal
extension
457 mm (18″) Horizontal
extension
610 mm (24″) Horizontal
extension
457 mm 18″ Jointed
extension arm
610 mm (24″) Jointed
extension arm

Length (L)
152 mm (6″)
305 mm (12″)
457 mm (18″)
610 mm (24″)
457 mm (18″)
610 mm (24″)

Must choose one release handle per arm.
Systems for the human/machine interface

CP-vertical configuration order form
Fax to: 937-629-2815
Each CP-vertical pendant arm system will include the following:
• CP-Vertical pendant arm that can be counterbalanced by the user based on load rating
• Mounting method (Post, Wallmount, Machine, Universal) will be attached to pendant arm
• A 6’ release cable will be included
• Conversion wrench and instructions
• Hardware to attach enclosure to CP-Vertical arm
Note: Hardware to attach the CP-Vertical pendant arm to mounting surface is not provided.

Below is a step-by-step guide to selecting a CP-vertical pendant arm system:
1

4

Determine maximum load *:
Maximum load =

+

Weight of enclosure (lbs.)**
total weight of all components
mounted ON or INSIDE of enclosure

Select any accessories that are needed for your
application. Each accessory can be used for all CPVertical arm configurations.
Note: You can add only one horizontal, jointed, or
vertical extension to each arm.

Maximum load kg (lbs.) = _________________________________
* Load = Weight of enclosure + total weight of all components mounted inside enclosure
** See VIP weight chart or Rittal handbook for more information.

2

Determine if additional accessories are
required:

Extensions
152 mm (6″) Horizontal extension
305 mm (12″) Horizontal extension
457 (18″) Horizontal extension
607 (24″) Horizontal extension
457 (18″) Jointed extension
607 (24″) Jointed extension
102 mm (4″) Vertical extension
203 mm (8″) Vertical extension
304 mm (12″) Vertical extension
Floor posts
1930 mm (36″) Floor post
1880 mm (74″) Floor post
2006 mm (79″) Floor post*

Determine proper CP-vertical pendant arm
based on load:
Select a vertical travel based on your maximum load
calculation from above.

Maximum load range (+ 0%)
0 to 22.68 kg (50 lbs)
23.13 kg (51lbs) to
34.02 kg (75 lbs)
34.47 kg (76 lbs) to
45.36 kg (100 lbs)

CP-V
CP-VL
CP-VXL
330 mm (13″) 584 mm (23″) 762 mm (30″)
vertical travel vertical travel vertical travel
Yes
Yes
Yes
Yes

Yes

No

Yes

No

No

Part No.
9968002
9968003
9968004
9968005
9968006
9968007
9968008
9968009
9968010
9968011
9968012
9968013

* Select when using jointed extension.

3

Determine mounting method:

5

Based on the CP-Vertical Pendant Arm you selected (i.e.CP-V,
CP-VL, CP-VXL) in step #2, select a mounting method that best fits
your application.
CP-V
CP-VL
CP-VXL
330 mm (13″) 584 mm (23″) 762 mm (30″)
vertical travel vertical travel vertical travel
Part No.
Part No.
Part No.
9967987
9967988
9967989
9967993
9967994
9967995
9967996
9967997
9967998
9967999
9968000
9968001

Mounting method
Post top
Wallmount
Machine top
Universal*

Determine release mechanism (required):
Select release mechanism based on the overall width
or type of enclosure.

Enclosure width
Less than or equal to 406 mm (16″)
Greater than 406 mm (16″) and
less than or equal to 609 mm (24″)
Release handle for VIP enclosure
Universal release handle
1

Call for availability.

2

* Universal incorporates the ability to post, wallmount, or machine mount the

Release
mechanism
Part No.
9968014
9968015
99680162
9968017 1

For use with VIP 6392.009

CP-vertical arm.

Customer information:
Inquiry

❏

Order

❏

Ordering information
Date _________________________________

Part Number

Quantity

Name ___________________________________________ Title __________________________________

____________

____________

Company _______________________________________________________________________________

____________

____________

Address ________________________________________________________________________________

____________

____________

City _____________________________________________ State _______________ Zip ______________

____________

____________

Phone _______________________________ Fax _______________________________________________

____________

____________

E-Mail __________________________________________________________________________________

____________

____________

Rittal Representative _____________________________________________________________________

____________

____________

Comments/Special Instructions ___________________________________________________________

____________

____________

Systems for the human/machine interface

131

Rittal pedestal systems . . .
. . . stationary or mobile

Always at the right
height for the
operating panel and
worktops

Pedestals in any version
For example, the cross member with
die-cast feet and integral cable routing,
or the mobile pedestal. The pedestal
base plate may be used as an
alternative.

Whether you work in a
standing or sitting position,
with the height-adjustable
panel or the panel lift, you
decide the correct position
for yourself.

Small, fine,
modular
Pedestals for
rigid or heightadjustable
and tiltable
configuration of
compact
operating
stations.
The modularity
facilitates
individual
designs.

132

A powerful
pillar with
many
options
The pillar
provides a stable
base for all
support arm
systems.

Systems for the human/machine interface

Pedestal systems
Pedestal, height-adjustable

134 – 149
134 – 137

Panel lift

138

Worktop attachment, IW

139
140 – 147

Pillars

148 – 149

Pedestal systems

Pedestals

Bringing movement to Rittal pedestal systems. They will meet all
your ergonomic and technical requirements.
For every enclosure type, height variability, mobile use, and
accommodation of cables, our extensive solution diversity meets
every conceivable requirement.

133

Pedestal systems
Pedestal, height-adjustable
Pedestal, height-adjustable
Modular assembly comprising:
● Lifting pillar
● Control unit for:
– Manual operation
– External mounting on surfaces/
enclosures
● Cross member with cast feet

Lifting pillar, electric
Height adjustment 470 mm (18.50
) (from
670 to 1140 mm (26.38
 to 40.94
), spindle
drive secured against unintentional dropping.
With electronic overload cutout to protect
the drive.
Adjusting unit made from extruded aluminum section with groove on all sides for
individual externally mounted equipment
via mounting kit CP 6142.030.
Head plate
● For direct mounting of
enclosures with support arm connection
– CP-L round
(e.g. Optipanel, from page 40)
or
– CP-XL
(e.g. VIP 6000, from page 12).
● For swivel mounting of enclosures, also
with keyboard support:
see assembly sequences

Weight
kg (lbs)
13.8 (30.42)

Part No.
CP
6142.000

Technical specifications:
Permissible load: max. 80 kg
Duty cycle:
max. 6 min/h during continuous operation
Ambient temperature: +5°C to +40°C
(+41 °F to 104°F)
Supply connection: 230 V/50 Hz
Transformer: 24 V DC
Protection ratings:
IP 65 (NEMA 4) to EN 60 529/10.91
(for electrical components).
Configuration:
Adjusting drive with transformer.

Base plate
For external mounting on the cross
member or a sub-structure provided by the
customer.
A
10

View A
132
88

88

132

45°

M6
R56
R4
1

max. 1140

670

45°

View B
10

124
88
1

162

138

max. 470

Ø1

B

134

Systems for the human/machine interface

Pedestal systems
Pedestal, height-adjustable
Control unit

For mounting on
surfaces/enclosures

Cross member with cast feet

Color
RAL
7035

Steel cross member with mounting holes
for lifting pillar, including 2 cast aluminum
feet.

Weight
kg (lbs)
5.8 (12.79)

Pedestal systems

For manual operation

Protection Part No.
ratings
CP
Manual operation
IP 65
6142.010
Mounting on
surfaces/
IP 30
6142.020
enclosures
Version

for height adjustment of the lifting pillar.
Design ready for connection with spiral
cable and connector.
For manual operation: With hooks for
location e.g. on the enclosure handle set.
For external mounting: With mounting
brackets for screw fastening.

Part No.
CP
6142.100

Accessories:
Foot rest CP 6145.100,
Trim panel CP 6144.100,
Base mount CP 6147.000,
see page 215.
Twin castors,
see page 213.

18

13

85

➀

521

M12

600

➁

660


 Prepared for trim panel CP 6144.100
or foot rest CP 6145.100

11

 Prepared for twin castors CP 6148.000
or base mount CP 6147.000

15

CP 6147.000

140

88

700

138

Ø 11
456

Assembly kit for
externally mounted
accessories

PU
1 set

Part No. CP
6142.030

Simply slide into the groove of the lifting
pillar and secure at any chosen height
using the existing screws.
With M10 thread for mounting your own
components such as utility trays.

Systems for the human/machine interface

135

Pedestal systems
Assembly sequence for pedestal, height-adjustable
It’s so easy!

1

Start at 1 “system start” by selecting the
enclosure situation which best describes
your requirements. Next, select the
corresponding support arm components.

System start

1.1 Mounting cutout
CP-L, round
Tiltable and rotatable,
direct mounting

Continue with CP-L according
to the item numbers.

2

Tilting adaptor

2.1 Tilting adaptor, 10°
CP-L, round
2.1
2.2
3.1
3.2
6.1

CP 6527.0X0, see page 111

3.1
3.2

L

L

System changes are indicated
by the color.

L

1.2 Mounting cutout
CP-XL
Direct mounting

Blue = CP-XL
System continuation/system
end:

1.3
6.1

2.2 Tilting adaptor
+/– 45°
CP-L, round
CP 6529.0X0, see page 112

XL

vertical
1.3 Connection adaptor
CP-L to CP-XL

tiltable or

Tiltable and rotatable
CP 6528.0X0, see page 104

rotatable components

L

2.1
2.2
3.1
3.2

XL

From item 3 a support section
is required between each
component (minimum length
approx. 100 mm (3.94
), for
wall/floor mounting approx.
160 mm (6.30
)).
The cross-sections indicate the
installation position(s).

L

L

X = 0 (RAL 7030)
X = 1 (RAL 7024)

1.4 Mounting cutout
CP-L, rectangular

L

2.3 Tilting adaptor 10°
CP-L, rectangular
2.3
3.3
3.4
3.5

CP 6527.1X0, see page 111

1.2

3.3
3.4
3.5

L

1.3
1.1
2.2
2.1
3.1

3.2

4.1

4.1

5.1

5.1

6.1

6.1

L

2.4 Enclosure attachment,
tilting, top mounting*
1.1 1.2

RAL 7024
IW 6902.670, see page 91

6.1

Vesa 75

L

S

Assembly example 1:

Assembly example 2:

Assembly example 3:

tiltable

swivel

direct mounting

1.2 Mounting cutout CP-XL

1.1 Mounting cutout CP-L,

1.1 Mounting cutout CP-L,

1.3 Connection adaptor
2.2 Tilting adaptor +/- 45°
3.1 Enclosure attachment
4.1 Support arm section
5.1 Wall/base mounting
6.1 Lifting pillar
136

round
2.1 Tilting adaptor 10°

L

S

3.1
3.2
3.3
3.4
3.5
6.1

L

* May also be used rotated through
180°, e.g. from CP-L rectangular or
CP-S to CP-L round.

round
or

3.2 Housing coupling

1.2 Mounting cutout CP-XL

4.1 Support arm section

6.1 Lifting pillar

5.1 Wall/base mounting
6.1 Lifting pillar

Systems for the human/machine interface

Pedestal systems
Assembly sequence for pedestal, height-adjustable
3 Enclosure
attachments
3.1 Enclosure attachment
CP-L round
CP 6525.5X0, see page 106

4.1

Pedestal systems

L

3.2 Housing coupling
CP-L, round
CP 6525.0X0, see page 109

4.1

4

Support sections

5

Attachment

6

Lifting pillar

L

4.1 Support section CP-L
Length
mm
(inches)

Color Part No.
RAL
CP

5.1 Wall/base mounting,
small, CP-L
5.1

CP 6520.5X0, see page 105

6.1 Lifting pillar, electric
6.1

CP 6142.000, see page 134
CP-L
CP-XL

250 (9.84) 7035 6509.000
250 (9.84) 9006 6509.010
See page 102

3.3 Enclosure attachment
CP-L, rectangular
CP 6525.6X0, see page 106

4.1

L

L

3.4 Housing coupling
CP-L, rectangular
CP 6525.1X0, see page 109

L

4.1

L

3.5 Enclosure attachment
CP-L, rectangular,
locatable

4.1

CP 6525.2X0, see page 107

Assembly example 4:
IW worktops for mounting on
the lifting pillar,
see page 160.

L

Systems for the human/machine interface

137

Pedestal systems
Panel lift
Panel lift

Color
RAL
7035

Height adjustment 445 mm (17.52
),
from 865 to 1310 mm (34.06
 to 51.18
).
Max. permissible load capacity: 50 kg
(110.23 lbs)
Configuration:
Telescopic pillar made of steel tube with
guides.
Self-locking drive with crank handle.

Weight
kg (lbs)
10.9 (24.03)

Part No.
CP
6139.000

Accessories:
Accessories
Pedestal base plate,
large
Enclosure
attachment CP-L,
round
Enclosure
attachment CP-L,
rectangular
Enclosure coupling
CP-L, round
Housing coupling
CP-L, rectangular

Part No.
CP

see
page

6137.535

146

6525.5X0

106

6525.6X0

106

6525.0X0

109

6525.1X0

109

50

34

85

40

Ø 55

70

min. approx. 865

□

max. approx. 1310

250

34

□

90

40

138

Systems for the human/machine interface

Pedestal systems
Worktop attachment, IW
Worktop attachment, IW

Color
RAL
7035

For mounting worktops on:
● Lifting pillar, electric
● Panel lift
● Enclosure attachment CP-L, round
● Housing coupling CP-L, round
● Enclosure attachment CP-XL, round
● Housing coupling CP-XL

Configuration:
Installation hardware

Part No.
IW
6902.780

Accessories:
Part No.
CP
6142.000
6139.000

Accessories

see
page
134
138

Lifting pillar, electric
Panel lift 1)
Enclosure
attachment CP-L,
6525.5X0
106
round
Housing coupling
6525.0X0
109
CP-L, round
Enclosure
attachment, CP-XL,
6130.600
122
round
Housing coupling,
6130.000
123
CP-XL
1) In conjunction with enclosure attachment,
CP-L, round, or enclosure attachment
CP-L, round.

380
25

350

30 30
5.5

30 30

12

130

7
Ø

M8

Ø 70
Ø 82
Ø1

80

312

Ø

12

90

106

Systems for the human/machine interface

139

Pedestal systems

Material:
Sheet steel

Weight
kg (lbs)
3.0 (6.61)

Pedestal systems
Pedestals
3 alternatives

Pedestal, mini
static

with height and tilt adjustment
For small panels and keyboard housings
up to 20 kg (44.09 lbs).

swivel

Part No.
CP
6146.300
±3

6146.200

0°

A

22

6146.400
6146.100

695

6148.000

732 – 1122

May be compiled from the
following modules:
A Tilt
adjustment
B Support section, heightadjustable
C Gas pressurised spring
(not illustrated)
D Pedestal
base plate
E Twin castors
see page 213

tiltable

B

(90)

10

D

E

2

 400

 340

1

M12

1 Clamping lever, tilt adjustment
2 Clamping lever, height adjustment

Tilt adjustment

PU
1

May optionally be used for direct topmounting on enclosures with a mounting
cutout:

Part No. CP
6146.300

● CP-S
● CP-L, rectangular
● CP-L, round
Adjustment range:
±30°
Material:
Sheet steel, zinc plated

View B
70
40

Configuration:
Locking lever and installation hardware for
height-adjustable mounting on the support
section.

2

Ø8

140

95

As tilt adjustment for support arm system
CP-S on request.

110

Rittal Service:

Ø 37
Ø6

5

Systems for the human/machine interface

Pedestal systems
Pedestals

Adjustment range from 732 to 1122 mm
(28.82
 to 44.17
).
Inner section for external mounting of:
● Tilt adjustment CP 6146.300*
● Enclosure attachment CP 6501.060 /
.070
● Housing coupling CP 6501.040 /.050
External section with:
● Clamping screws at the rear for external
mounting on pedestal base plate
CP 6146.100
● Clamping lever for height adjustment
● Surface for external cable routing.
* Cannot be combined with enclosure
attachment or housing coupling.

PU
1

Part No. CP
6146.200

Rittal Service:
Other heights available on request.
Accessories:
Tilt adjustment CP 6146.300,
see page 140.
Enclosure attachment CP 6501.060 / .070,
see page 90.
Housing coupling CP 6501.040 / .050,
see page 90.
Support section CP-S,
see page 88.

Material:
Extruded aluminum section, natural
anodized.
Configuration:
Inner and outer section including locking
lever and installation hardware for external
mounting on the base plate and enclosure.

37

Ø7

View A

Gas pressurised spring
●
●
●
●
●

For relief with height adjustment
Optional installation
Mounting on the inside
Load capacity 15 kg (33.07 lbs)
Length 490/885 mm (19.29
/34.84
)

PU
1

Part No. CP
6146.400

Configuration:
Installation hardware for installing in the
support section, height-adjustable.

Pedestal base plate
With large surface for stability and welded
tube connectors (48.3 mm (1.9
) diameter)
to accommodate the external profile of the
support section, height-adjustable.
Material:
Sheet steel, powder coated

Systems for the human/machine interface

Color
RAL
7024

PU

Part No. CP

1

6146.100

Accessories:
Twin castors CP 6148.000,
see page 213.
Floor attachment (from the outside using
screws up to M10).

141

Pedestal systems

Support section, heightadjustable

Pedestal systems
Pedestals
Pedestal
for Command Panel
One oval panel is permanently screwfastened, while the other can be opened by
“spreading” with a screwdriver for easy
laying of cables.
In the Command Panel VIP 6000 with
keyboard housing, we recommend an
adjustable frame connector or hinged
frame connector at the front for opening the
cover (see page 226).
Configuration:
2 cast aluminum feet,
1 cross member made of steel,
2 steel support tubes welded to cross
member,
2 oval panels made from aluminum
section,
1 top cover made from cast aluminum with
support section CP-L, partially preassembled.

85

50

69

34

Cover for
cable entry

B

B

162

40
Ø 7.4

136

B–B

R 7.5

Pedestal
HxWxD
1093 x 600 x
Color Weight Part No.
700 mm
RAL kg (lbs)
CP
(43.03
 x
23.62
 x
27.56
)
With hole for
7035/
cable entry in Natural 34.9
6141.000
cross
ano- (76.94)
member
dized
With cable
conduit
7035/
adaptor and Natural 35.1
6141.100
hole for cable ano- (77.38)
entry in cross dized
member
Other widths and heights and support
tubes available on request.

44.5
max. PG 48/M50

R 17

130

957

1093

273

28 44

A

M5

1

R43
48

2
80

58

A

5°

18

521
600

M12

13

85

5
1

660

1 Cutout only for CP 6141.100

1 Cross-section, cable entry
2 Cable conduit adaptor only for CP 6141.100

35

A–A

140

700

15

11
CP 6147.000

70
130
456
600

Version and accessories

Enclosure may optionally be mounted via

Cast feet

Accessories

Part No.

see page

With M12 thread at the bottom
for

Twin castors

CP 6148.000
PC 4634.500
PC 4634.000
PS 4611.000

213

PS 4612.000

214

Levelling feet

With M8 thread on the inside for

142

Base mount

CP 6147.000

215

Foot rest

CP 6145.100

215

Trim panel

CP 6144.100

215

Part No. CP

see
page

Enclosure attachment
CP-L, round

6525.500

106

Enclosure attachment
CP-L, rectangular

6525.600

106

Housing coupling
CP-L, round

6525.000

109

Housing coupling
CP-L, rectangular

6525.100

109

Enclosure attachment
CP-L, rectangular,
locatable

6525.2X0

107

Accessories

Systems for the human/machine interface

Pedestal systems
Pedestals

for IW worktops
The panel tray is opened for easy cable
laying.
Material:
Feet: Cast aluminum
Cross member, vertical support tubes:
Steel
Panels: Aluminum section

Pedestal
HxWxD
946 x 600
x 700 mm
(37.25
 x
23.62
 x
27.56
)

Color
RAL

Weight
kg (lbs)

Part No.
CP

7035/
33.7
Natural
6141.200
(74.30)
anodized

Note:
Pedestal, height-adjustable,
available on request.

Pedestal systems

Pedestal

380
350
312
22

90

1

A

946

A

2

3

18

85

13

M12

521

660

600
1 Prepared for worktop
IW 6902.310
2 Prepared for trim panel CP 6144.100
or foot rest CP 6145.100
3 Prepared for twin castors
CP 6148.000
or base mount CP 6147.000

15

11

A–A

140

700

Ø

70

CP 6147.000

456
600

Systems for the human/machine interface

143

Pedestal systems
Pedestals
Pedestal, modular, small
For the configuration of compact operating stations.
Part No.
CP-L
Steel

Page

6143.210
–

218
–

Part No.
CP-S
Stainless
steel
6143.310
6664.500

6511.000
6513.000
6515.000
–
6143.200

102
102
102
–
145

6660.050
6660.010
6660.020
6664.500
6143.300

May be compiled from the following
modules:
A Enclosure reinforcement
B Enclosure attachment, top*

Page
218
93

C Support section, straight

(may be shortened to required length
by cutting)
500 mm (19.69
)
1000 mm (39.37
)
2000 mm (78.74
)
B Enclosure attachment, bottom*
D Pedestal base plate, small
* Not required with CP-L steel version.

92
92
92
93
145

Steel

Steel
A

1065*

C

Stainless steel

10

108

15

°

D

135

250
400

400
* for support section length 1000 mm (39.37
)

Stainless steel
A
B

C
1104*

Ø 32.5

400

30°

400

250

D
10

108

15°

B

135

400

4 x M8

* for support section length 1000 mm (39.37
)

144

Systems for the human/machine interface

Pedestal systems
Pedestal base plate, small

Material

● With one hole at the rear for
commercially available cable conduit
gland M20.
● With two holes at the top (including
sealing plug) for lower base attachment
cross member.
● Prepared on the inside for a cable clamp
DK 7077.000 or DK 7078.000 for strain
relief.

Weight
kg (lbs)

Sheet steel
6.3
2.5 mm
(13.89)
(12 ga)
Type 304
7.0
stainless
(15.43)
steel

Color
RAL

Part No.
CP

7035

6143.200

–

6143.300

Note:
Commercially available screws up to M8
may be used for floor attachment.
Steel

Accessories:
Cable clamp DK 7077.000 or DK 7078.000,
see page 223.
Additional parts
see table, page 144.

Stainless steel

Pedestal, mobile

Pedestal, mobile
with support section
CP-L
(see page 102)
CP-XL
(see page 120)

Consisting of:
2 sheet steel beams, each with
2 die-cast zinc connection plates with
plastic covers,
4 twin castors, 2 x with, 2 x without locks,
1 cross-brace, screw fastened, of sheet
steel with integral cable clamping bracket,
1 support section made of aluminum (for
CP 6136.000 with clip-in lid).

Part No. CP
6136.500
6136.000

Accessories for the configuration of
Command Panel:
Enclosure
attachment for
6136.500
CP-L
6136.000
CP-XL

See
page

Part No. CP
6525.6X0
6525.5X0
6130.600
6130.500

122

CP 6136.000

800

800

CP 6136.500

106

80

20

60

C 30/15 x 100 lg

approx. 205

Material:
Powder coated in RAL 7035,
Roller bearings RAL 7030,
partially pre-assembled.

100

R 110

155

50

600

80

75

85

R 95

Systems for the human/machine interface

145

Pedestal systems

Pedestals

Pedestal systems
Pedestals
Pedestal base plate, large
Fitted as standard with:
● Cutout for concealed mounting of cable
conduit adaptors up to PG 36 or M 50.
● Cutout for PG segments (EL 2235.010 to
EL 2235.080) or cable conduit adaptor
up to 70 mm (2.76
) diameter
● Integral cable clamp bracket.
Material:
Sheet steel, powder coated

For
Weight
Support
kg (lbs)
arm section
12.4
CP-L
(27.34)
13.1
CP-XL
(28.88)

Color
RAL

Part No.
CP

7035

6137.535

7035

6137.035

Additional parts

Configuration:
Integral reinforcement and mounting cutout
for support section CP-L or CP-XL,
complete with installation hardware for
configuration of the support section.

Support section CP-L,
see page 102,
Support section CP-XL,
see page 120,
Panel lift (for CP-L version),
see page 138.
Accessories:

100

CP enclosure or worktops according to
choice.
Twin castors,
see page 213.
Levelling feet,
see page 214.
Wall mounting bracket KL 1580.000 or
KL 1590.000,
see Handbook, page 962.

B

View A

A

View B
51
18.5

59

6

15

65

50

18.5

600

490

1

440

200

Cutout for CP 6137.035

Cutout for CP 6137.535

M 12

2
480
1 510 for floor anchoring
with KL 1580.000, KL 1590.000
2 400 for floor anchoring
with KL 1580.000, KL 1590.000

146

Systems for the human/machine interface

Pedestal systems
Pedestals
Pedestal for operating
housing
Suitable for side mounting of operating
housings.

Weight
kg (lbs)
24 (0.94)

Color
RAL
9011

Part No.
CP
6135.000

Consisting of:
● Pedestal plate, on castors
● Support section
● End cap with recessed handle.

80
108

115

850

995

Recommended
Permissible
enclosure*
installation weights
CP 6442.200
45 kg (99.21 lbs)
CP 6462.200
20 kg (44.09 lbs)
CP 6552.200
30 kg (66.14 lbs)
CP 6662.200
20 kg (44.09 lbs)
* Side cutouts on the enclosures
for mounting on the pedestal,
available on request.

Pedestal systems

124

Benefits:
● Pre-assembled cables are inserted as
with a cable duct and covered.
● Integral recessed handle and castors
facilitate easy movement.
● Optimum adaptation of the tilt of the
operating housing to the most
favourable working position, with
infinitely variable rotation (360°).
Installation hardware are included in
the supply.

360

US patent no. 4,754,942
German patent no. 36 10 151
European patent no. 0 238 911
with validity for CH, IT

70

500

Systems for the human/machine interface

147

Pedestal systems
Pillars
Material:
Steel, painted

Pillar
The stable base point for support arm
system CP-L and CP-XL. The attachment of
additional enclosures, e.g. for security
systems, is also possible. There is a choice
of 2 cross-sections:
● 140 x 140 mm (5.51
 x 5.51
)
● 200 x 200 mm (7.87
 x 7.87
)

Configuration:
Installation hardware for support arm
system according to selection.
Note:
Customer-specific designs, such as:
● Other RAL colors
● Drilling patterns
● Heights
● Consoles for additional enclosures
available on request.

Version:
Base plate 15 mm (0.59
) thick, with four
mounting holes, cutout in the base plate
according to the cross-section for cable
entry from below. Pedestal tube (wall
thickness 5 mm (0.20
)) welded to the base
plate, with connection facilities for support
arm systems as per the selection table.

Accessories:
Support arm system CP-L,
see page 96 – 115.
Support arm system CP-XL,
see page 116 – 127.
Metal gland panels,
see page 217.
Color
RAL
7035
7035

Configuration
Cross-section, 140 x 140 mm (5.51
 x 5.51
), Height 2000 mm (78.74
)
Cross-section, 200 x 200 mm (7.87
 x 7.87
) , Height 2000 mm (78.74
)
Cutout for cable entry
Without cutout in pillar
Cutout on the front
Cutout at rear
Cutout on the left
Cutout on the right
Support arm connection
Drilled for
Wall/base mounting
Wall mounted hinge Top mounted joint
at the front
top
at the front
top
without
CP-S
6501.1X0
CP-S
6501.1X0
CP-L
6520.0X0
CP-L
6521.0X0
CP-L
6522.0X0
CP-XL
6160.000
6110.000
CP-XL
6170.000

6214.
6220.

X
X

X
X

0
0

0
1
2
3
4

–
88
88
105
113
114
122
125

0
6
7
2
3
4
1
5

CP 6522.000

69

100

100

126

172

CP 6170.000

Page

Part No. CP

CP 6521.000

CP 6110.000

CP 6160.000

H

CP 6520.000

101

110

89.5

1

A

2

Part No.
6214.XX0
6220.XX0

160

192

62

15

17

4

3
D

B

C

2
3

A
140
200

B
200
300

C
280
400

D
120
180

1 Support arm connection according to
design code number
2 Cutout for cable entry according to
design code number
3 Cutout in base plate

1
B

148

Systems for the human/machine interface

Pedestal systems
Pillars
Pillar, small

Material:
Steel

Part No. CP
6214.500

Accessories:
Housing coupling CP-XL,
see page 123.
Enclosure attachment CP-XL,
see page 122.

1150

Design:
Base plate 12 mm (0.47
) thick, with 4
mounting holes.
Pedestal tube (cross-section 160 x 80 mm
(6.30
 x 3.15
), wall thickness 3.2 mm
(10 ga)) welded to base plate, with
connection plates at the top for support
arm components CP-XL.

Color
RAL
7035

Pedestal systems

For compact assemblies with drilled holes
for the attachment of:
− Housing coupling CP-XL
− Enclosure attachment CP-XL
● With cutout for 24-pole connector for
cable entry at the bottom rear
● Height: 1150 mm (45.28
)

M4

12

112

130

32

36

.5

Ø

12

64

450

50
M8

500

160

35

54

80

450
500

Systems for the human/machine interface

149

Rittal Industrial Workstations . . .
. . . Versatility through modularity

Industrial Workstations are more than just combinations of

The concept is convincing because it is so simple: IW modules are

individual components. Individual customer requirements are

equipped with climate control and electronic components,

achieved cost-effectively and to perfection.

centralized security controlling, plus an extensive range of

Examples include compact solutions for scanner or laboratory
workstations, individual worktops, combinations with the

accessories, for a complete solution. Perfect solutions from a single
source: Rittal.

AP console system or Command Panel – there are virtually no limits

We develop and manufacture according to

to your creativity.

the principles of ergonomics and safety
engineering.

150

Systems for the human/machine interface

Industrial workstations

152 – 169

Individual solution examples

152 – 153

Fast selection

154 – 155

Enclosures with door versions

156 – 157

Enclosures with drawers

158 – 159
160 – 161

Pedestal with worktop

162 – 163

Monitor housings, operating housings

164 – 165

Technical details

166 – 169

Industrial workstations

Worktops

Are you looking for a solution that offers more workspace than a
PC cabinet but is more compact than a desk? A system with plenty
of opportunities for expansion, a high level of security, and
exceptional style? Discover the new dimension at the human/
machine interface: Rittal Industrial Workstations.

151

Our task is to achieve precisely the desired requirement profile.
Standardized IW modules provide the ideal basis in this respect.
Complemented by modified or individual components, this creates
customized workstations.
Rittal Industrial Workstations are at the core of every solution.
These are solutions with a special design flair. There are virtually no
limits to your creativity when designing a system.

With individual worktops – including additional
pedestals – the IW range can be extended as
required in production.

Control rooms – e.g. for printing presses with an
individual control panel, and stylish enclosures for
slimline HMI monitors.

The ideal laboratory workstation:
A large worktop links the workbench and the PC
enclosure. A socket strip and light are integrated
into the shelved panel.

152

Systems for the human/machine interface

Industrial workstations

Industrial workstations

Individual solution examples

The supplement to the IW enclosure with
drawers, thanks to customized panel enclosures,
combined with the support arm system, provides
solutions for a wide range of laboratory
equipment and small machines.

Top mounting or a partially enclosed workstation
can also be developed from the IW concept.

A consistent, stylish design solution is derived
from a combination of IW modules with the
Factory enclosure based on TS 8.

IW as an extended workbench for small machines
including control and monitoring units.

The highly individual workstations for
measurement technology, calibration and
monitoring are a particular IW domain.

Combination with the support arm system makes
the IW concept particularly versatile and costeffective with minimal use of special components.

The monitor housing is combined with the
modular diversity of the AP console system.
Mounted on castors, this creates a mobile
machine control center.

The sealed “mobile workstation”, secure and
ideal for industrial use, e.g. with guide handles
and TFT enclosure.

It doesn’t get much more compact than this –
scanner or laboratory workstation with secure
accommodation e.g. of computer and laboratory
equipment.

Systems for the human/machine interface

153

Industrial workstations
Fast selection
It’s so easy!

1 Monitor housings,
operating housings

Choose the appropriate IW components
according to your requirements.
Start at 1 “monitor housings, operating
housings”.

1.1 Monitor housing 17

IW 6902.510
Monitor housing 21″

Mounting components

2.1 Feet
for monitor housing
2.1
2.2

IW 6902.610
see page 225

IW 6902.500

Continue with IW according to the
item numbers.

2

for monitor and operating housings

see page 164

System end

2.2 Spacer plate
for monitor housing
IW 6902.630
rotatable in conjunction
1.2 Optipanel
For TFT monitors or other
display and input units

3.4
4.2

Turntable
for spacer and support plate
2.4
2.5

IW 6902.620
see page 224 – 225

From page 40

2.3 Support plate for indiv.
equipment
IW 6902.650
rotatable in conjunction
Turntable
for spacer and support plate
IW 6902.620
see page 224 – 225

2.4 Supp. arm system CP-L
for rotatable, swivel and
height-adjustable positioning
of the Optipanel command
panel
1.2

3.5
4.3

see page 96 – 115

2.4

3.5

2.5 Enclosure attachment,
tilting, top mounting*
IW 6902.670

3.5
4.4

see page 91

5.6

Assembly example:

* May also be used rotated through 180°.

1.2 Optipanel
2.4 Support arm system CP-L
3.5 Worktop, prepared
7.1
7.2

for enclosure attachment
5.6 Enclosure

2.6 Enclosure attachment
tilting, base mounting
IW 6902.640

3.6
4.4

see page 110

with drawer section
7.1 Base/plinth, stationary
7.2 Twin castors

154

Systems for the human/machine interface

Industrial workstations
Fast selection
Worktops

5

Enclosures

3.1 Cover
solid
IW 6902.400
see page 160

5.1
Designer
door, rear
panel screwfastened from
the inside
Height 900 mm
(35.43
)

5.1
5.2
5.3
5.4
5.7

5.6
Drawer
sect.,
designer
door,
Height
900 mm
(35.43
)

7.1
7.2

IW 6900.400
see page
158

IW 6900.000
see page 156

3.2 Worktop
small, solid
see page 160

Worktops
with handle
4

3.3 Worktop
solid
IW 6902.100
see page 160

4.1 Worktop with handle
solid
5.1
5.2
5.3
5.4
5.6
5.7

IW 6902.000
see page 160

5.7
Drawer front,
rear panel
screwfastened from
the inside
Height 900 mm
(35.43
)

5.2
Designer
door, rear
panel screwfastened from
the outside
Height
1000 mm
(39.37
)

IW 6902.300

IW 6900.600

IW 6901.000
see page 156

5.1
5.2
5.3
5.4
5.7

see page 158

5.3
Designer
door, rear
door
Height 900 mm
(35.43
)

5.8
Worktop, keyboard drawer,
designer door,
rear door
pre-configured,
Height 1000 mm
(39.37
)

IW 6900.100
3.4 Worktop
prepared for
turntable

4.2 Worktop with handle
prepared for
turntable

IW 6902.110

IW 6902.010

see page 160

see page 160

see page 156

IW 6901.100*
see page 158

5.4
Viewing door,
rear door
Height 900 mm
(35.43
)

5.9
Roof, keyboard drawer,
designer door,
rear door
pre-configured,
Height 1000 mm
(39.37
)

IW 6900.200
3.5 Worktop
prepared for enclosure
attachment

4.3 Worktop with handle
prepared for enclosure
attachment

Connection on left,
IW 6902.120

Connection on left,
IW 6902.020

Connection on right,
IW 6902.130

Connection on right,
IW 6902.030

see page 160

see page 160

7.1
7.2

Industrial workstations

3

see page 156

IW 6901.200*
see page 158
*The fitted versions IW 6901.100
(with worktop) and IW 6901.200 (with
roof) are also available with other
worktops on request.

7 Base/plinth
components
7.1 Base/plinth, stationary
PC 8800.920

7.2

see page 207

6
3.6 Worktop
prepared for tilting
enclosure attachment,
base mounting

6.1

4.4 Worktop with handle
prepared for tilting
enclosure attachment,
base mounting

IW 6902.310

IW 6902.320

see page 162

see page 162

Systems for the human/machine interface

Pedestal

6.5 Pedestal
6.1

IW 6141.200
see page 162

7.2 Twin castors
7.2

PC 4634.500
see page 213

155

Designer door, rear panel
screw-fastened from the
inside

Designer door, rear panel
screw-fastened from the
outside

Designer door, rear door

Part No. IW

Width 600 mm
(23.62
)
Depth 600 mm
(23.62
)

Height mm (inches)

Enclosure

6900.000 6901.000 6900.100 6900.200
54.9
59.8
59.9
60.6
(121.03) (131.84) (132.06) (133.60)
900
1000
900
900
(35.43)
(39.37)
(35.43)
(35.43)

Weight kg (lbs)

Supply
includes

Viewing door, rear door

Design

Material

Color
RAL

Frame construction with side walls,
screw-fastened from the inside

Sheet steel 1.5 mm (16 ga)

7035 textured

Base with gland panel for cable entry

●

●

●

●

●

●

●

Levelling feet to compensate for floor
irregularities
Designer door

Viewing door

Rear panel
Rear door

Vertical bars with locking rod and double-bit
insert, hinged on right-hand side

Aluminum section

7035

Door or installation plate, folded

Sheet steel 1.5 mm (16 ga)

7015

Vertical decorative trim panels

Plastic to UL 94-V0

7035

Pane with screen-printed mask

Safety glass ESG 4.0 mm
(0.16
)

7015

Sheet steel 1.5 mm (16 ga)

7035 textured

Sheet steel 1.5 mm (16 ga)

7035 textured

Screw-fastened from the inside
Screw-fastened from the outside
With locking rod and double-bit insert, hinged on
the right-hand side

●
●
●
●

●

Lock systems:
Standard double-bit lock insert may be exchanged for lock inserts, type B cylinder inserts, or comfort handle,
see page 244 – 247,
With the door at the front, only in conjunction with handle adaptor PC 8611.300, see page 244.

156

Systems for the human/machine interface

Industrial workstations
Enclosures with door versions
A modern workstation: Consistent lines
from top to bottom!
Monitor housings and enclosures – each
equipped with a viewing door – create a
formal unit including base/plinth. The worktop with handle and monitor turntable are

Industrial workstations

stylishly integrated.

Note:
● Other enclosure depths or heights,
variable on a 25 mm (0.98
) increments,
● All IW components as well as system
accessories available fully assembled
ex works
are available on request.
Detailed drawings, see page 166.
Accessories:
see page 200 – 201
or see index.
IW worktops, see page 160.
IW monitor housings, operating housings,
see page 164 – 165.

157

Worktop, keyboard drawer,
designer door, rear door

Roof, keyboard drawer,
designer door, rear door

Drawer section, designer
door, rear door

Part No. IW

Supply
includes

Enclosure

Width 600 mm
(23.62
)
Depth 600 mm
(23.62
)

Drawer front, rear panel
screw-fastened from the
inside

6901.100 6901.200 6900.400 6900.600

Height mm (inches)

1000
(39.37)

Weight kg (lbs)

91.2
85.7
73
78
(201.06) (188.93) (160.94) (171.96)

Version

Material

Color
RAL

Frame construction with side walls,
screw-fastened from the inside

Sheet steel 1.5 mm (16 ga)

7035 textured

Base with gland panel for cable entry

1000
(39.37)

●

●

●

●

●

●

900
(35.43)

●

900
(35.43)

●

Levelling feet to compensate for floor
irregularities
Plastic to UL 94-V0

7035
7015

Sheet steel 1.5 mm (16 ga)

7035

Trim panel with recessed handle, folded as
handrest, with lock no. 3524 E

Plastic to UL 94-V0

7035
7015
9006

Drawer tray, fitted with drawer trim panel and
telescopic slides

Sheet steel 1.5 mm (16 ga)

7035

Drawer trim panel with recessed handle, with
lock no. 3524 E.

Plastic to UL 94-V0

7035
7015
9006

Vertical bars with locking rod and double-bit
insert, hinged on right-hand side

Aluminum section

7035

Door or installation plate, folded

Sheet steel 1.5 mm (16 ga)

7015

Drawer front

Drawer tray, slotted all round for cross member
retainers, 1 x with short trim panel, 2 x with tall
trim panel, each with recessed handle,
telescopic slides

Sheet steel 1.5 mm (16 ga)

7035
7015
9006

Worktop

Solid

Chipboard, plasticlaminated on both sides,
with edge strip

Similar to 7035
Edge strip:
Similar to 7015

Roof

Edged, screw-fastened from the inside

Sheet steel 1.5 mm (16 ga)

7035 textured

Rear panel

Screw-fastened from the inside

Sheet steel 1.5 mm (16 ga)

7035 textured

Rear door

With locking rod and double-bit insert, hinged on
the right-hand side

Sheet steel 1.5 mm (16 ga)

7035 textured

Trim panel, top To finish off the enclosure at the top

●

Drawer housing
Keyboard
drawer

Drawer
section

Designer door

Extension piece with cable support, hinged, plus
pull-out mousepad and keyboard cradle

●

●

●

●

●

●
●
●
●

●

●

Lock systems:
Standard double-bit lock insert may be exchanged for lock inserts, type B cylinder inserts, or comfort handle,
see page 244 – 247,
with the designer door, only in conjunction with handle adaptor PC 8611.300, see page 244.

158

Systems for the human/machine interface

Industrial workstations
Enclosures with drawers
For a tidy workspace:
The IW enclosure offers plenty of storage
space, whether with a complete drawer
front or in combination with the designer
door. The special base/plinth ensures stability, even with heavy loads.
Further opportunities for expansion, e.g.
with a stylish Optipanel enclosure for the
TFT monitor and the prepared worktop
including handle, cover every conceivable

Industrial workstations

requirement.

Note:
● Other enclosure depths or heights,
variable in 25 mm (0.98
) increments,
● All IW components as well as system
accessories available fully assembled
● Other drawer combinations,
● Fitted versions IW 6901.100 (with
worktop) and IW 6901.200 (with roof)
also available with other worktops,
see page 160,
● Drawers with extension lock
are available on request.
Detailed drawings, see page 166.
Accessories:
see page 200 – 201
or see index.
IW worktops, see page 160.
IW monitor housings, operating housings,
see page 164 – 165.
Support arm system CP-L,
see page 96 – 115.

159

Roof
Folded, attached from the inside.
Material:
1.5 mm (16 ga) sheet steel
Finish:
Painted in textured RAL 7035

Version

Solid

Height mm (inches)

13 (0.51)

Width mm (inches)

600 (23.62)

Depth mm (inches)

640 (25.20)

Weight kg (lbs)

7.4 (16.31)

Part No. IW

6902.400

Worktops
Material thickness: 38 mm (1.50
)
Material and surface finish:
Chipboard, plastic-laminated on both
sides, similar to RAL 7035, with tough
plastic edging, similar to RAL 7015.

Without
handle

Version

Prepared for
enclosure attachment*

Solid

Solid

Prepared for turntable

–

–

–

left

right

Width mm (inches)

610 (24.02)

1000 (35.24)

1000 (35.24)

1000 (35.24)

1000 (35.24)

Depth mm (inches)

645 (25.39)

895 (35.24)

895 (35.24)

895 (35.24)

895 (35.24)

Weight kg (lbs)

11.6 (25.57)

24 (52.91)

23 (50.71)

23 (50.71)

23 (50.71)

6902.300

6902.100

6902.1101)

6902.1201)

6902.1301)

Mounting cutout for
enclosure attachment

Part No. IW

* For CP-L enclosure attachment CP 6525.5X0, housing coupling CP 6525.0X0, angle coupling CP 6526.0X0, see page 106 – 112.
1) Hole may be used in conjunction with the adaptor plate for connector grommet IW 6902.660 (see page 222) for cable entry!

With handle

(not suitable for use in enclosures with
drawer section IW 6900.400)
Version
Mounting cutout for
enclosure attachment

Solid

Prepared for
enclosure attachment*

Prepared for turntable

–

–

left

right

Width mm (inches)

1200 (47.24)

1200 (47.24)

1200 (47.24)

1200 (47.24)

Depth mm (inches)

950 (37.40)

950 (37.40)

950 (37.40)

950 (37.40)

Weight kg (lbs)

34 (74.96)

33 (72.75)

33 (72.75)

33 (72.75)

Part No. IW

6902.000

6902.0101)

6902.0201)

6902.0301)

* For CP-L enclosure attachment CP 6525.5X0, housing coupling CP 6525.0X0, angle coupling CP 6526.0X0, see page 106 – 112.
1) Hole may be used in conjunction with the adaptor plate for connector grommet IW 6902.660 (see page 222) for cable entry!
160

Systems for the human/machine interface

Industrial workstations
Worktops

Need a very specific format with additional
cutouts for your measurement, testing or
production systems? Just ask!

Note:
● Keyboard and mousepad integrated into
the worktop (including IP 67),
● Worktops in modified sizes and heightadjustable,
● All IW components as well as system
accessories available fully assembled
● Fitted versions IW 6901.100 (with
worktop) and IW 6901.200 (with roof)
also with other worktops
are available upon request.

Accessories:
see page 200 – 201
or see index.

Industrial workstations

Every worktop has its own particular
strength: e.g. for TFT enclosures on the
support arm system CP-L, for monitor
housings on a turntable, or simply plenty of
work space.

Detailed drawings see page 168 – 169.

161

Pedestal
The panel tray is opened for
easy cable laying.
Material:
Feet: Cast aluminum
Cross member, vertical support
tubes: Steel
Panels: Aluminum section
Color:
Feet, cross member, support
tubes and worktop attachment:
textured RAL 7035.
Panels: Natural anodized

Without handle

Height
mm (inches)

946 (37.25)

Worktop

Width
mm (inches)

Height
mm (inches)

38 (1.50)

600 (23.62)

Prepared for tilting
enclosure attachment

Depth
mm (inches)

Width
mm (inches)

Weight kg (lbs)

33.7 (8.16)

Material and surface finish:
Chipboard, plastic-laminated
on both sides, similar to
RAL 7035, with tough plastic
edging, similar to RAL 7015.

950 (37.40)

700 (27.56)

Depth
mm (inches)

600 (23.62)

Weight kg (lbs)

16 (35.27)

Part No. IW

6902.310

Part No. IW

6141.200

Note:
Pedestal, height-adjustable,
see page 134 – 137.

With handle
Height
mm (inches)

38 (1.50)

Width
mm (inches)

950 (37.40)

Depth
mm (inches)

658 (23.62)

Weight kg (lbs)

16 (35.27)

Part No. IW

6902.320

Enclosure attachment

Foot rest

Trim panel

Base mount

tiltable
For mounting underneath the
worktop.
Adjustable tilting angle:
40° to the rear, 40° to the front

Material:
Connector pieces: Cast
aluminum RAL 7035
Round tube section:
Aluminum, natural anodized.

Material:
Cast aluminum, powder
coated in textured RAL 7035.

Material:
Sheet steel, zinc plated,
passivated

Configuration:
Installation hardware

Material:
Sheet steel, painted,
RAL 7024

Configuration:
Installation hardware

Configuration:
Posidrive raised countersunk
screws M12

Weight kg (lbs)

1.6 (3.53)

Weight kg (lbs)

0.6 (1.32)

Weight kg (lbs)

1.6 (3.53)

Weight kg (lbs)

0.7 (1.52)

Part No. IW

6902.640

Part No. CP

6145.100

Part No. CP

6144.100

Part No. CP

6147.000

162

Systems for the human/machine interface

Industrial workstations
Pedestal with worktop
If you need work space and are prepared
to sacrifice some storage place, then opt
for the pedestal with worktop. There is
plenty of space for the keyboard,
mousepad and production plans.

Industrial workstations

An ergonomic solution: The correct incline
of the TFT monitor at the top – e.g. in the
customized Optipanel enclosure (see page
40 onwards) – and the foot rest at the
bottom, for relaxed, changing work
positions.

The enclosure attachment can be mounted
either on the support arm connection of the
Optipanel enclosure or on the underside or
rear of any enclosure.

Note:
● Other pedestal widths or heights,
● Keyboard and mousepad built into the
worktop (including IP 67),
● Worktops in modified sizes
are available upon request.

Accessories:
see page 200 – 201
or see index.
Detailed drawings see page 143.
Twin castors see page 213.

163

Monitor housing
Front designer door, rear door
with release for designer door.
With cutout at the bottom and
reinforcement for support arm
connection CP-XL.
Component shelf, slotted, for
monitor.
Material:
Enclosure, rear door and
component shelf:
1.5 mm (16 ga) sheet steel
Designer door:
Vertical plastic decorative trim
panels to UL 94-V0
Glass pane: Safety glass ESG
4.0 mm (0.16
)

Finish:
Enclosure and rear door:
Textured RAL 7035
Designer door:
Decorative trim panels
RAL 7035, screen-printed mask
on glass pane RAL 7015
Component shelf: RAL 7015
Lock systems:
Standard double-bit lock insert
may be exchanged for lock
inserts or lock system
Ergoform-S,
see page 245 – 247.

Dimensions
HxWxD
mm (inches)

Weight
kg (lbs)

For screen

Part No. IW

600 (23.62) x 600
(23.62) x 500 (19.69)

38 (83.77)

17


6902.510

600 (23.62) x 600
(23.62) x 600 (23.62)

43 (94.80)

21


6902.500

Feet

Spacing plate

Turntable

for monitor housing,
see page 225.

for monitor housing,
see page 224.

for spacer or support plate,
see page 225.

Optipanel
A special, stylish enclosure made from
extruded aluminum section. In installation
depths of 50, 100 and 150 mm (1.97
, 3.94

and 5.91
), the width and height is adapted
to suit your TFT monitors or other display
and input units.
All enclosure depths may be combined
with support arm system CP-L,
see page 40 onwards.

Support arm system CP-L
Using support section CP-L, Optipanel
Command Panels may be positioned in a
rotatable, swivelling and height-adjustable
configuration depending on the respective
ergonomic conditions,
see page 96 onwards.

164

Systems for the human/machine interface

Industrial workstations
Monitor housings, operating housings

Within the context of its Industrial
Workstations series, Rittal offers a wide
range of standardized and individual
accommodation options for both versions.
Versatile ergonomic requirements, security
requirements, individual dimensions and
design lines are met to perfection.

Accessories:
see page 200 – 201
or see index.
Detailed drawings see page 169.
IW worktops prepared for enclosure
attachment or turntable,
see page 160 – 161.

Industrial workstations

As well as conventional monitors, TFT flatscreens are also becoming increasingly
popular.

165

Enclosure with designer door, rear panel
IW 6900.000 / IW 6901.000

512

512

812

869

812 (912)

900

512

512

900 (1000)

Enclosure with designer door, rear door
IW 6900.100

362

362

604

636

604

636

Enclosure with viewing door, rear door
IW 6900.200

512

812

900

512

362

604

166

636

Systems for the human/machine interface

Industrial workstations
Technical details
Enclosure with worktop, keyboard drawer,
designer door, rear door
IW 6901.100

Enclosure with roof, keyboard drawer,
designer door, rear door
IW 6901.200
608

512

512

512

118

145

118

526

744

912

1018

912

1043

526

Industrial workstations

145

75

75

512

362

362

636

636

604

669

669

604

Enclosure with keyboard support, designer door, rear door
IW 6900.400
Max. load capacity of drawer: 15 kg/33.07 lbs

512
75

512

812

275

145
320
900

812

902

83

60

86.5

145

512

100

512

Enclosure with drawer front, rear panel
IW 6900.600
Max. load capacity per drawer: 30 kg/66.14 lbs

320

362

636

604

518
604

519

889

655

Punchings
for cross members

Systems for the human/machine interface

167

Roof
IW 6902.400

Worktop without handle,
prepared for enclosure attachment
IW 6902.120 / IW 6902.130

608

38
1000

512

50 75 50

(162.5)
(155)
761

155
895

300

480

512

614

640

162.5

60

403

R 100

0

13

480

Worktop without handle,
solid
IW 6902.300
610

Worktop with handle,
solid IW 6902.000,
prepared for turntable IW 6902.010
1200

38

618

645

317.5

38

1009

950

60

155

R

10

00

400

Worktop without handle,
solid IW 6902.100,
prepared for turntable IW 6902.110

Worktop with handle,
prepared for enclosure attachment
IW 6902.020 / IW 6902.030
38

(162.5)

317.5

60

950
10

155

R

R 100

0

00

1009

895

(155)

761

155
60

38

1200

162.5

1000

589

168

Systems for the human/machine interface

Industrial workstations
Technical details
Worktop for pedestal with handle
IW 6902.320

38

38

Worktop for pedestal
IW 6902.310

950

Industrial workstations

658

490

600

600

490

260

260

950

484
593.5

Enclosure attachment, tilting
IW 6902.640

Monitor housing
IW 6902.500 / IW 6902.510

70

°
+ 40

– 40°

460

510

458

597

211

171

133

66

385

1
101
600

95

42.5

502 (402)

3
22.5

512

636 (536)

2

M6

1 IW 6902.310
2 Prepared for enclosure with connection
CP-L rectangular or connection console CP-L
CP 6508.0X0
3 Prepared for connector gland
SZ 2400.300 / SZ 2400.500

40

Systems for the human/machine interface

169

Rittal PC enclosure systems . . .
. . . compact and practical

Based on TS 8
The baying system with infinite configuration possibilities. The frame construction
means it is open on all sides: with removable side walls and roof plate.
Various versions are possible, e.g. with drawer, fold-out tray or desk section. Depending on requirements, a small or large mounting compartment may be used.
Ease of operation
1 Release cable for easy unlatching of
the viewing door, may also be mounted
behind the door at the base or rear.
2 Handle strip folded down as handrest
during data input.
3 Integral mousepad extension piece,
pulls out to the left or right.
4 Keyboards up to 70 mm (2.76
) height
may be used.
5 Storage tray for mouse behind the
keyboard.
6 Side walls and roof removable,
secured and screw-fastened from the
inside.
7 Gland panels, three-part.

Based on ES
The compact enclosure system ES 5000
with a body manufactured from a single
piece. The solid body with rear door
guarantees a high load-bearing
capacity.
With keyboard drawer, fold-out tray or
desk section, and option either a small
or large mounting compartment.

170

Safety
8 Viewing door with support frame,
single-pane safety glass.
9

8

12

Cable support, hinged, on keyboard
extension piece, for secure, pinch-free
cable routing with clips in the
accessories supplied loose.

10 Keyboard and mouse cable with
connectors are routed securely to the
PC in a sealed configuration via the
separable connector gland.
11 Lockable keyboard drawer and
viewing door of monitor. 2 keys (lock
no. 3524 E) SZ 2532.000 included in
the configuration.

11

12 Component shelf for monitor, to avoid
hot spots, prepared for the assembly
of axial fans, with drilled holes for
power strips.

Stainless steel,
based on ES

10

For exceptional requirements in terms of
hygiene and corrosion protection.
With keyboard drawer or desk section.

Systems for the human/machine interface

9

PC enclosure systems
Based on TS 8 with keyboard drawer

172 – 181
172 – 173

Based on TS 8 with fold-out keyboard tray
or desk section

174 – 175

Based on ES with keyboard drawer

176 – 177

Based on ES with fold-out keyboard tray or desk section 178 – 179
Stainless steel

180 – 181

Housing all your computer equipment, from the monitor, computer
system, printer and keyboard to the mouse, becomes easy with
Rittal's PC enclosure systems. The result is perfect protection from
humidity and dirt, temperature fluctuations and unauthorized
access. What is more, these systems will exceed your expectations with regard to ergonomics, design and accessory diversity.

PC enclosure systems

6

1
4

5
3

2

7

Systems for the human/machine interface

171

With mounting compartment, small and drawer
Part No. PC 8366.300
605

max. 355*

202

70

362

924

833

841

924

833

64
1605

362

122

150

150

386

190

366

i.L. 512

308

439

454

70

1605
841

624

i.L. 512

112

190

max. 549*

558

366

122

150

384

458

589

460

max. 505*

624 (824)
i.L. 512 (712)

64

605
i.L. 512 (712)

max. 397*

With drawer
Part No. PC 8366.000, PC 8368.000

362

636

636 (836)

* adjustable in 25 mm (0.98
) increments
With mounting compartment, large and drawer
Part No. PC 8366.400
988

605

i.L. = Clearance width

190

i.L. 512

i.L. 512

500

455

With mounting
compartment,
small and drawer

With mounting
compartment,
large and drawer

924

841

833

1605

150

122

70

With drawer

362

636

Part No. PC
Depth 636 mm
(25.04
)

8366.000

Depth 836 mm
(32.91
)

8368.000

Supply includes

Version

Material

Color RAL

Enclosure

Frame construction with side walls and roof
secured from the inside

Sheet steel 1.5 mm (16 ga)

7035 textured

Gland panels, three-part

Sheet steel 1.5 mm (16 ga)

Zinc-plated

Rear door

Viewing door, top

Mounting
compartment,
large, top
Component shelf
for monitor

Drawer for
keyboard

With locking rod and double-bit insert, r/h hinge

Sheet steel 2.0 mm (14 ga)

7035 textured

With support frame latched from the inside*,
r/h hinge

Sheet steel 1.5 mm (16 ga)

7015

Vertical decorative trim panels

Plastic to UL 94-V0

7035

Glass with screen-printed mask

Safety glass ESG 4.0 mm (0.16
)

7015

Vertical bars, latched from the inside*, r/h hinge

Aluminum section

7035

Installation plate

Sheet steel 1.5 mm (16 ga)

7015

Trim strip top/bottom

Plastic to UL 94-V0

7035

8366.300

8366.400

●

●

●

●

●

●

●

●

●

Slotted, permanently installed

Sheet steel 1.5 mm (16 ga)

7015

Enclosure

Sheet steel 1.5 mm (16 ga)

7035

Keyboard extension piece with cable support,
hinged, plus pull-out mousepad and keyboard
cradle

Sheet steel 1.5 mm (16 ga)

7035

Trim panel with handle strip, folded as handrest,
with lock no. 3524 E

Plastic to UL 94-V0

7035/7015/9006

R/h hinge, screw-fastened from the inside on left,
folded installation plate

Sheet steel 1.5 mm (16 ga)

7015

Decorative side trim panels

Plastic to UL 94-V0

7035

Vertical bars with locking rod and double-bit
insert, hinged on right-hand side

Aluminum section

7035

Door or installation plate folded

Sheet steel 1.5 mm (16 ga)

7015

●

●

●

●

●

* With unlatching for top viewing door
Mounting
compartment,
small
Bottom door

172

●

●

●

●

Systems for the human/machine interface

PC enclosure systems

PC enclosure systems

Based on TS 8 with keyboard drawer

Maximum keyboard dimensions

Drawer
Fold-out tray

Height
mm (inches)

Width
mm (inches)

Depth
mm (inches)

70 (2.76)

480 (18.90)

260 (10.24)

60 (2.60)
50 (1.97)

475 (18.70)

200 (7.87)
250 (9.84)

Accessories:
Base/plinth, stationary,
see page 207.
Base/plinth components and
trim panels,
see page 206.

Protection ratings:
IP 55 to EN 60 529/10.91
Complies with UL and NEMA Type 12.
Lock systems
Standard double-bit lock insert may be
exchanged for 27 mm (1.06
) lock inserts,
type A or cylinder inserts, type B,
see page 246 – 247 and comfort handle,
see page 244.
With the door at the bottom, only in
conjunction with handle adaptor
PC 8611.300, see page 244.

IP 67 mouse and mousepad
to fit mousepad extension
piece.
Part No. see page 266.

Systems for the human/machine interface

173

With fold-out tray
Part No. PC 8366.100, PC 8368.100

With desk section
Part No. PC 8366.200
894
624

589

458

460

177

11°

150

1605

1512

157
1605

225

300

330

300

384

max. 549*

i.L. 512

max. 505*

i.L.512

422**

380**

379

386

308

439

454

(270)

605

287

64

624 (824)
i.L.512 (712)

64

605
i.L.512 (712)

908

841

841

803

1005

397 (597)

362

362

636

636 (836)

** adjustable by + 225 mm (8.86
) or + 300 mm (11.81
)
i.L. = Clearance width

* adjustable in 25 mm (0.98
) increments
i.L. = Clearance width

With
fold-out tray

With
desk section

Part No. PC
Depth 636 mm
(25.04
)

8366.100

Depth 836 mm
(32.91
)

8368.100

Supply includes

Version

Material

Color RAL

Enclosure

Frame construction with side walls and roof secured from
the inside

Sheet steel 1.5 mm (16 ga)

7035 textured

Gland panels, three-part

Sheet steel 1.5 mm (16 ga)

Zinc-plated

With locking rod and double-bit insert,
R/h hinge

Sheet steel 2.0 mm (14 ga)

7035 textured

With support frame latched from the inside*,
r/h hinge

Sheet steel 1.5 mm (16 ga)

7015

Vertical decorative trim panels

Plastic to UL 94-V0

7035

Glass with screen-printed mask

Safety glass ESG 4.0 mm (0.16
) 7015

Slotted, permanently installed

Sheet steel 1.5 mm (16 ga)

7015

Enclosure with mouse holder and cutout in rear panel,
Width 19″ x Height 4 U

Sheet steel 1.5 mm (16 ga)

7035

Trim panel hinged at the bottom, with 2 retaining cords,
with lock no. 3524 E

Plastic to UL 94-V0

7035/7015/
9006

Keyboard support with mousepad extension piece and
2 nylon bands for keyboard

Sheet steel 1.5 mm (16 ga)

7035

Enclosure with removable cover top and bottom

Sheet steel 1.5 mm (16 ga)/
2.0 mm (14 ga)

7035

Trim strip, top and handle strip

Plastic to UL 94-V0

7035/7015/
9006

Vertical bars with locking rod and
double-bit insert, r/h hinge

Aluminum section

7035

Door or installation plate folded

Sheet steel 1.5 mm (16 ga)

7015

Rear door

Viewing door, top

Component shelf
for monitor

Fold-out tray for
keyboard

8366.200

●

●

●

●

●

●

●

●

●

* With unlatching for top viewing door
Desk section

Bottom door

174

●

●

●

Systems for the human/machine interface

PC enclosure systems

PC enclosure systems

Based on TS 8, with folding keyboard or desk section

Maximum keyboard dimensions

Drawer
Fold-out tray

Height
mm (inches)

Width mm
(inches)

Depth
mm (inches)

70 (2.76)

480 (18.90)

260 (10.24)

60 (2.36)
50 (1.97)

475 (18.70)

200 (7.87)
250 (9.84)

Accessories:
Base/plinth, stationary,
see page 207.
Base/plinth components and
trim panels,
see page 206.

Protection ratings:
IP 55 to EN 60 529/10.91
Complies with UL and NEMA Type 12.
Lock systems
Standard double-bit lock insert may be
exchanged for 27 mm (1.06
) lock inserts,
type A or cylinder inserts, type B,
see page 246 – 247 and comfort handle,
see page 244.
With the door at the bottom, only in
conjunction with handle adaptor
PC 8611.300, see page 244.

Base/plinth, stationary
Adapted to the design of the
enclosure.

Systems for the human/machine interface

175

With drawer
Part No. PC 4603.703, PC 4609.703
205

54

599

647 (847)

i. L. 512

i. L. 502 (702)

558

410

100

125

57

939

854

863

939

863

854

1604

1604

492

492

620


 = External surface available
for population
i.L.= Clearance width

620 (820)

With mounting compartment, small and drawer
Part No. PC 4603.913
599

205

318

max. 355*

82

465

100

57

939

854

863

200

100

M8 x 20
1604

150

ax.
Tm

9˝)

.6 (1

482

125 40

20

558

410

441

450

647
i.L. 502

275

i.L. 512

max. 397*

125

100

57

➀

425

591

558

500

591

483

205

318

max. 547*

318

i.L. 502

max. 505*

647

599
i.L. 512

82

With mounting compartment, large and drawer
Part No. PC 4603.603

492

* adjustable in 25 mm (0.98
)
increments

Version

Material

Color
RAL

Solid, open at bottom

Sheet steel 1.5 mm (16 ga)

7035
textured

Gland panels, three-part

Sheet steel 1.5 mm (16 ga)

Zincplated

Rear door

With locking rod and double-bit insert, hinged on
the right-hand side

Sheet steel 2.0mm (14 ga)

7035
textured

Mounting
compartment,
large,
top

Vertical bars locked from the inside*, r/h hinge

Aluminum section

5018

Folded installation plate

Sheet steel 1.5 mm (16 ga)

7035

Trim strip top/bottom

Plastic to UL 94-V0.

7035

Curved outwards, vertical bars,
locked from the inside*, r/h hinge

Aluminum section

5018

Supply includes

Enclosure

Viewing door
top

Component shelf
for monitor

Drawer
for keyboard

Trim strip top/bottom

Plastic to UL 94-V0.

7035

Glass with screen-printed mask

Safety glass ESG 4.0 mm
(0.16
)

7015

Slotted, permanently installed

Sheet steel 1.5 mm (16 ga)

7035

Enclosure

Sheet steel 1.5 mm (16 ga)

7035

Keyboard extension piece
with 1 pair of telescopic slides

Sheet steel 1.5 mm (16 ga)

7035

Trim panel with handle strip, folded as handrest,
with fastener, lock no. Nr. 3524 E

Plastic to UL 94-V0.

7035

Decorative side trim panels

Aluminum section

5018

2 spacers for slimline keyboards

Cellular rubber

PC 4603.603

620

PC 4603.703
PC 4603.913
PC 4609.703

●

●

●

●

●

●

●

●

●

●

●

●

●

●

* With unlatching for viewing door, top
Mounting
compartment,
small

Bottom door

R/h hinge, left from the inside
folded installation plate

Sheet steel 1.5 mm (16 ga)

7035

Trim strip at the bottom

Plastic to UL 94-V0.

7035

Vertical bars

Aluminum section

5018

Vertical bars with locking rod, Ergoform-S handle
and double-bit insert, r/h hinge

Aluminum section

5018

Door or installation plate folded

Sheet steel 1.5 mm (16 ga)

7035

●

●

●

●

* With unlatching for viewing door, top with desk
section
176

Systems for the human/machine interface

PC enclosure systems

PC enclosure systems

Based on ES with keyboard drawer

Part No. For Depth
Height
mm (inches) 620 mm (24.41
) 820 mm (32.28
)
Base/plinth

Page

100 (3.94)

2813.200

2846.200

208

200 (7.87)

2814.200

2847.200

208

Cross member,
adjustable

70 (2.76)

8601.680

211

Twin castors

125 (4.92)

4634.500

213

Maximum keyboard dimensions
Height mm (inches)
without
mousepad

with
mousepad

Width
mm/inches

Depth
mm/inches

Fold-out tray

69 (2.72)

62 (2.44)

480 (18.90)

230 (9.06)

Drawer

55 (2.17)

40 (1.57)

480 (18.90)

250 (9.84)

Version

Mounting compartment,
large, drawer

Drawer

Lock systems:
Standard double-bit lock insert
may be exchanged for 27 mm
(1.06
) lock inserts, type A or
cylinder inserts, type B,
see page 246 – 247 and
Ergoform-S lock system, see
page 245.
Protection ratings:
IP 55 to EN 60 529/10.91
Complies with UL and NEMA
Type 12.

Mounting compartment,
small, drawer

Depth
mm (inches)

650 (25.59)

650 (25.59)

850 (33.46)

650 (25.59)

Part No. PC

4603.603

4603.703

4609.703

4603.913

Weight kg (lbs)
Mousepad,
see opposite

106.0 (233.69)
4614.000

Systems for the human/machine interface

106.2 (234.13) 120.9 (266.54)
4614.000

4614.000

Accessories:
see page 200 – 201
or see index.

106.8 (235.45)

Mousepad, passive
with velour cover,
including installation hardware,
Part No. see opposite.

4614.000
177

With desk section
Part No. PC 4603.704

200

max. 547*

11°

204

1604

863

1001

829

i. L. 1512

125

486

385 (585)

65

45

max. 505*

82
425

410

155

275
1604

863

647
i. L. 502

591

408

275

410

599
i. L. 512

231

450

647 (847)
i. L. 502 (702)

82

599
i. L. 512

275

441

With fold-out tray
Part No. PC 4603.920, PC 4609.920

492

492

620 (820)

620

* adjustable in 25 mm (0.98
)
increments

912

i.L. = Clearance width

Supply includes
Enclosure
Rear door

Viewing door, top

Component shelf
for monitor

Fold-out tray
for keyboard

Version

Material

Color
RAL

Solid, open at bottom

Sheet steel 1.5 mm (16 ga)

7035
textured

Gland panels, three-part

Sheet steel 1.5 mm (16 ga)

Zinc-plated

With locking rod and double-bit insert,
r/h hinge

Sheet steel 2.0 mm (14 ga)

7035
textured

Curved outwards, vertical bars, latched on the inside*,
r/h hinge

Aluminum section

5018

Trim strip top/bottom

Plastic to UL 94-V0.

7035

Glass with screen-printed mask

Safety glass ESG 4.0 mm
(0.16
)

7015

Slotted, permanently installed

Sheet steel 1.5 mm (16 ga)

7035

Enclosure with cutout in rear panel,
width 19
 x height 4 U, with screw-fastened lid

Sheet steel 1.5 mm (16 ga)

7035

Trim panel hinged at the bottom with 2 retaining shears,
with fastener, lock no. Nr. 3524 E

Plastic to UL 94-V0.

7035

Decorative side trim panels

Aluminum section

5018

Keyboard support,
with 2 nylon loops for keyboard

Sheet steel

7035

Enclosure with removable lid
top and bottom.

Sheet steel 1.5 mm (16 ga)/
2.0 mm (14 ga)

7035

Trim strip, top and handle

Plastic to UL 94-V0.

7035

PC 4603.920
PC 4603.704
PC 4609.920
●

●

●

●

●

●

●

●

●

* With unlatching for top viewing door

Desk section

Bottom door

Decorative side trim panels

Aluminum section

5018

Vertical bars with locking rod,
Ergoform-S handle and double-bit insert, r/h hinge

Aluminum section

5018

Door or installation plate folded

Sheet steel 1.5 mm (16 ga)

7035

●

●

●

* With unlatching for top viewing door with desk section
178

Systems for the human/machine interface

PC enclosure systems

PC enclosure systems

Based on ES with fold-out keyboard tray or desk section

Base/plinth

Part No. For Depth
Height
mm (inches) 620 mm (24.41
) 820 mm (32.28
)
100 (3.94)
2813.200
2846.200
200 (7.87)

2814.200

2847.200

Page
208
208

Cross member,
adjustable

70 (2.76)

8601.680

211

Twin castors

125 (4.92)

4634.500

213

Maximum keyboard dimensions
Height mm (inches)
without
mousepad

with
mousepad

Width
Depth
mm (inches) mm (inches)

Fold-out tray

69 (2.72)

62 (2.44)

480 (18.90)

230 (9.06)

Drawer

55 (2.17)

40 (1.57)

480 (18.90)

250 (9.84)

Version

Fold-out tray
650 (25.59)

850 (33.46)

650/910 (25.59/35.83)

Part No. PC

4603.920

4609.920

4603.704

Mousepad,
see page 177

100.5 (221.56) 114.1 (251.24)
4613.000

4613.000

Systems for the human/machine interface

Accessories:
see page 200 – 201
or see index.

Protection ratings:
IP 55 to EN 60 529/10.91
Complies with UL and NEMA
Type 12.

Desk section

Depth
mm (inches)
Weight kg (lbs)

Lock systems:
Standard double-bit lock
insert may be exchanged for
lock inserts, 27 mm (1.06
),
type A, or cylinder lock inserts,
type B, see page 246 – 247
and Ergoform-S lock system,
see page 245.

102.1 (225.09)

Mouse, IP 67
for protection against dust and
humidity.
Part No. see page 266.

2380.000
179

With keyboard drawer
Part No. PC 4650.000

With desk section
Part No. PC 4650.704
816
627

i.L. 512

i.L. 502

max. 505*

381

max. 547*

599

293

589

558

381

361

max. 547*

i.L. 502

max. 505*

i.L. 512

293

627

589

599

i.L.15

i.L. 1512

1384
492

798

863

954

854

1603.5

125
53

1603.5

798

863

4°

492

10

1384

125

100

7

47.5

i.L. 542

* adjustable in 25 mm (0.98
) increments

i.L. = Clearance width

Available on request:
PC enclosure system PC enclosure
with mounting
system with drawer
compartment, large,
and drawer

PC enclosure system
with desk section

Model No. PC
4650.0001) 4650.7042) 4650.304
Height mm (inches)
Width mm (inches)
Depth mm (inches)
Supply
includes

Version

Material

Finish/Color

Solid top and sides, open at the bottom

Type 304 stainless steel,
1.8 mm (15 ga)

Brushed, 240 grain

Gland panels, three-part

Type 304 stainless steel,
1.5 mm (16 ga)

With locking rod and double-bit insert, r/h hinge

Type 304 stainless steel,
2.0 mm (14 ga)

Brushed, 240 grain

Latched from the inside*, r/h hinge

Type 304 stainless steel,
1.5 mm (16 ga)

Brushed, 240 grain

Viewing window

Safety glass ESG 4.0 mm
(0.16
)

Slotted, permanently installed

Sheet steel ST 1203,
1.5 mm (16 ga)

RAL 7035

Enclosure

Sheet steel ST 1203,
1.25 mm (18 ga)

RAL 7035

Keyboard extension piece with cable support,
hinged and mousepad extension piece

Sheet steel ST 1203,
1.5 mm (16 ga)

RAL 7035

Trim panel, folded as handrest, with fastener,
lock no. Nr. 3524 E

Type 304 stainless steel,
1.25 mm (18ga)

Brushed, 240 grain

Enclosure with cover plate top and bottom

Type 304 stainless steel,
1.5 mm (16 ga)

Brushed, 240 grain

Design strip

Plastic approved for use
with foodstuffs

RAL 5002

With locking rod and double-bit insert, r/h hinge

Type 304 stainless steel.
1.5 mm (16 ga)

Brushed, 240 grain

Enclosure

Rear door
Viewing
door, top
Component
shelf

Drawer

Bottom
door

* With unlatching for viewing door with
desk section

600 (23.62)
620
(24.41)

620/820
(24.41/
32.28)

610
(24.02)

890
(35.04)

●

●

●

●

●

●

●

●

●

●

Polycarbonate

Safety
glass

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

* With unlatching for top viewing door
Desk
section

4650.305

1600 (62.99)

●

1)

To order enclosures in 1.4404 (Type 316L) please add the extension .500 to the Model No. Delivery times available on request.
2) To order enclosures in 1.4404 (Type 316L) please add the extension .504 to the Model No. Delivery times available on request.
180

Systems for the human/machine interface

PC enclosure systems

PC enclosure systems

Stainless steel

Maximum keyboard dimensions

Drawer
Fold-out tray

Height
mm (inches)

Width
mm (inches)

Depth
mm (inches)

70 (2.76)

480 (18.90)

260 (10.24)

60 (2.36)

475 (18.70)

50 (1.97)

Accessories:
Base/plinth and levelling feet,
see page 209/214
or see index.

200 (7.87)
250 (9.84)

Lock systems
Standard double-bit lock insert
may be exchanged for 27 mm
(1.06
) lock inserts, type A or
lock cylinder inserts, type B,
see page 246 – 247.
Door bottom and rear prepared
for installation of the ErgoformS lock system,
see page 245.
Protection ratings:
IP 55 to EN 60 529/10.91
PC 4650.000/.704 complies
with UL and NEMA Type 12.
PC 4650.304/.305 complies
with UL and NEMA Type 4x.

Component shelf
may be installed in the height in
25 mm (0.98
) increments.
Part No. see page 256.

Systems for the human/machine interface

Mounting angles, 19

for mounting behind the lower
front door. Part No. see HB 30,
page 1026.

Base/plinth trim, modular
for cable entry in the base/
plinth.
Part No. see page 210.

181

Rittal console systems . . .
. . . multi-variable

Universal console

Console system

One-piece console

● Optionally with short or tall door. Short
door offers free area for mounting
desk section (see photograph) or
keyboard drawer.
● High level of stability and high
protection category because the
body is manufactured from a
single piece.
● One-piece mounting panel across the
entire height, with C fold at the side,
depth-adjustable in 25 mm (0.98
)
increments.
● Universal interior installation with
partial mounting panels, component
shelves, system chassiss and rails
thanks to round and square holes in
25 mm (0.98
) increments.
● Rear door across the entire height for
uninhibited access from the rear.

● Multi-variable in combination. Each
component may be installed
independently or integrated into the
machine or plant.
● Pedestals, with mounting panel, in
two depths, also suitable for use as
consoles.
● Desk units in two depths with
perforated strips in the base and
cover for easy installation.
● Consoles, with mounting panel, in
three depths and two heights for
virtually any installation situation.
Instead of the consoles, compact
enclosures AK (see Handbook 30,
page 84) may also be combined with
the console system.

● Variable installation depth in the cover
section, and cable entry from the rear
via a mounting panel height-offset by
2 x 40 mm (1.57
).
● Cover including perforated strips for
cable routing. Safety lid stay may be
unlatched with two-handed operation.
● Door hinge may be swapped from
right to left by simply unscrewing the
hinges.

AP Muti-Vario console system
US patent no. 4,843,519
German patent no. 38 65 047
European patent no. 0 281 895
with validity for DE, ES, FR, GB, IT

The AP console system, the AP onepiece consoles and the AP universal
consoles have the following approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Russian Maritime Register of Shipping
● Lloyds Register of Shipping
● VDE
● Norske Veritas
● Bureau Veritas

182

Systems for the human/machine interface

Console systems

184 – 199

Console systems AP – Combination options

184 – 185

Console systems AP – Modules

186 – 187

Console systems AP – Technical details

188 – 191

One-piece consoles AP, sheet steel

192 – 193

Universal consoles AP, sheet steel

194 – 195

One-piece consoles AP, stainless steel

196 – 197

Universal consoles AP, stainless steel

198 – 199

Function and variability are key features of all Rittal console systems. Perfect designs for added benefits in terms of assembly,
security and operation. The performance capability of a machine or
plant is decided at the console and operating unit. Only optimum
packaging of today’s sensitive controls combined with optimum
ergonomic conditions for operating staff can create the pre-requi-

Console systems

sites for cost-effective plant operation.

183

Simple selection of your desired
combination
The elements of the AP console system in
depths 400 mm (15.75
) (blue) and
500 mm (19.69
) (green) may be combined
in numerous user-specific versions, as
shown in the diagram.
The table opposite allows you to find the
order number for your selection
immediately.

Modern, slimline HMI (human/machine
interfaces) or displays may also be used.
Integrated into the stylish,
tailor-made Command Panel
systems VIP 6000, Optipanel
and Compact Panel (yellow),
this produces a wide range of
CP modern extension options for
the classic AP console
systems.
●
●
●
●

Trim plate (A2/B2) with reinforcement
and cutout for CP-L available on request
Specify the dimensions for positioning on
the trim plate and the Part No. of the
enclosure attachment.

VIP 6000, see page 12 – 39
Optipanel, see page 40 – 57
Compact-Panel, see page 58 – 59
Support arm systems,
see page 78 – 127.

A2

A1
B7 1)2)
B2
A6

B11)

A5

A6

A6
A4

B4

A2

A2
A4

A4
CP

CP
A5

A2

A1

A5

A2

A1

A3

A3

B2

B2

CP

CP
B2

B4

1)

B1

B7

1)2)

B2

B4

B11)

B3

B3

1)

CP

CP

B2

A2

B11)

A1

A8
184

May also be configured
with the door at the rear
(see diagram opposite)
2) When assembling,
additional holes on the
desk unit are required

A9

B8

B9
Systems for the human/machine interface

B7 1)2)

Console systems AP
Combination options for the modules

B4
A6

B3
A5
B2
Examples of
configuration with
doors to the rear

A4

A3
For further information, see page 186 – 187.
Technical details, see page 188 – 191.

A2
D = 500 mm (19.69
)
Width mm (inches)

Height mm (inches)

800 (31.50) 1200 (47.24) 1600 (62.99)
Part No.

Part No.

D = 400 mm (15.75
)
Width mm (inches)

Part No.

800 (31.50) 1200 (47.24) 1600 (62.99)
Part No.

Part No.

Part No.

1648.600

1652.600

2612.600

2642.600

2652.600

2611.200

2641.200

2651.200

2615.200

2645.200

2655.200

2600.600

2620.600

2630.600

2902.200

2922.000

2962.200

2901.200

2921.200

2961.200

AK enclosure

1200 (47.24)

Console systems

B7

Console

2647.600

2648.600

2649.600

630 (24.80)
with deep rear door

A6

Console

2662.600

2663.600

2664.600

430 (16.93)
with deep rear door

A5

Console

2614.600

2644.600

2654.600

430 (16.93)

A4

B4

Center part
2613.200

2643.200

2653.200

200 (7.87)

A3

B3

Trim panel
A2

2616.200

2646.200

2656.200

28 (1.10)

B2

Pedestal

2610.600

2640.600

2650.600

670 (26.83)

A1

B1

Base/plinth
2842.200

2852.200

2864.200

200 (7.87)
B9

A9

A8

2841.200

Systems for the human/machine interface

2851.200

2863.200

100 (3.94)

B8

185

Multi-variable
The components of the AP console system
can be combined in many user-specific
versions. Modern flat screens and operator
panels can also be used. Integrated into
the stylish Command Panel systems
VIP 6000, Optipanel and Compact Panel,

this produces a wide range of modern
extension options for the classic AP
console systems.

Protection ratings:
IP 55 to EN 60 529/10.91
Complies with UL and NEMA Type 12
(provided the appropriate parts are
combined).

Combination options
see page 184 – 185.

Technical details see page 188 – 191.

Trim panel

To fit
Color
Width mm Depth mm RAL
(inches)
(inches)
800 (31.50)
400
1200 (47.24)
(15.75)
1600 (62.99)
7032
800 (31.50)
500
1200 (47.24)
(19.69)
1600 (62.99)

To finish off pedestals, desk units or
consoles.
Material:
Sheet steel, painted, 1.5 mm (16 ga)

120

2615.200
2645.200
2655.200
2616.200
2646.200
2656.200

To order versions in RAL 7044, please add the
extension .300 to the Part No., and for versions
painted in textured RAL 7035, use extension
.500. Delivery times available on request.

8.7

395/495

302.5/402.5

1

9

20

20

45˚

24

18.5

320/420

10

21.5

28

50

23

40

120

Part No.
AP

B
1 = does not apply to console width 800 mm (31.50
)

Consoles
Supply includes
Enclosure
open at bottom
Door(s) hinged at
bottom with retaining
cords at the front.
For depth 500 mm
(19.69
): with door(s)
at rear
Mounting panel.
For depth 500 mm
(19.69
): adjustable in
25 mm (0.98
)
increments

Height in mm (inches)
Width in mm (inches)

430 (16.93)
PU

800
(31.50)

Depth in mm (inches)
Part No. AP

1200
(47.24)

1600
(62.99)

800
(31.50)

400 (15.75)

Material
Sheet steel
1.5 mm
(16 ga)

Color
RAL

2.0 mm
(14 ga)
7032

3.0 mm
(11 ga)

1600
(62.99)

800
(31.50)

500 (19.69)

1200
(47.24)

E-coat primed
RAL 7044,
Powder-coated on
the outside in
textured RAL 7032

Zinc-plated

430 (16.93)
1200
(47.24)

Finish

630 (16.96)
1600
(62.99)

800
(31.50)

1200
(47.24)

1600
(62.99)

500 (19.69) with deep rear door

1 p. 2612.600 2642.600 2652.600 2614.600 2644.600 2654.600 2662.600 2663.600 2664.600 2647.600 2648.600 2649.600

Number of lids

1

1

1

2

2

2

2

2

2

2

2

2

Weight kg (lbs)

22.5
(49.60)

40.0
(88.18)

52.5
(115.74)

30.6
(67.46)

48.0
(105.82)

62.4
(137.57)

38.7
(85.32)

56.0
(123.46)

72.3
(159.39)

47.8
(105.38)

64.4
(141.98)

86.8
(191.36)

Lock inserts
Standard double-bit lock insert may be exchanged for 47 mm (1.85
) lock inserts, type D, see page 246
Other accessories from page 200 or see index.
To order in primed RAL 7044 please add the extension .800 to the Part No., and for versions painted in textured RAL 7035, use extension .500.
Delivery times available on request.
186

Systems for the human/machine interface

Console systems AP
Desk units
Enclosure
open top and bottom

Material
Sheet steel
1.5 mm
(16 ga)

Console lid with cam
and lid stay

2.0 mm
(14 ga)

Supply includes

Height in mm (inches)

Color
RAL

Finish

7032

E-coat primed
RAL 7044,
Powder-coated on
the outside in
textured RAL 7032

200 (7.87)

Width in mm (inches)

PU

Depth in mm (inches)

800 (31.50)

1200 (47.24) 1600 (62.99)

800 (31.50)

850/33.46 (for depth 400/15.75)
1

Part No. AP
Weight kg (lbs)

1200 (47.24) 1600 (62.99)

Page

950/37.40 (for depth 500/19.69)

2611.200

2641.200

2651.200

2613.200

25.5 (49.60)

35.5 (78.26)

44.0 (97.00)

30.6 (67.46)

2643.200

2678.000

2682.000

–

2678.000

2653.200

42.6 (93.92) 52.8 (116.40)

Accessories
Aluminum strips AP

3

2682.000

–

230

Lock inserts
Standard double-bit lock insert may be exchanged for 47 mm (1.85
) lock inserts, version D, see page 246
Other accessories from page 200 or see index.

Pedestals
Supply includes
Enclosure
open at top
Door or double door
with locking rod.
For depth 400 mm
(15.75
): front.
For depth 500 mm
(19.69
): front and rear
Gland panels,
two-piece
Mounting panel. For
depth 500 mm (19.69
):
Infinitely adjustable.

Height in mm (inches)

Material
Sheet steel
1.5 mm
(16 ga)

Color
RAL

Finish
E-coat primed
RAL 7044,
Powder-coated
on the outside
in textured
RAL 7032

2.0 mm
(14 ga)
7032
1.5 mm
(16 ga)

Zinc-plated

3.0 mm
(11 ga)

670 (26.38)

Width in mm (inches)

PU

800 (31.50)

Depth in mm (inches)

1200 (47.24) 1600 (62.99)

800 (31.50)

400 (15.75)
1

Part No. AP
Doors
Weight kg (lbs)

1200 (47.24) 1600 (62.99)

Page

500 (19.69)

2600.600

2620.600

2630.600

2610.600

2640.600

2650.600

1

2

2

1

2

2

43.5 (95.90) 62.3 (137.35) 80.0 (176.37) 52.2 (115.08) 75.0 (165.35) 96.0 (211.64)

Accessories for external mounting
Base/plinth SO

Height 100 mm (3.94
)

1

2901.200

2921.200

2961.200

2841.200

2851.200

2863.200

208

Height 200 mm (7.87
)

1

2902.200

2922.200

2962.200

2842.200

2852.200

2864.200

208

Cross-member, adjustable AP

2

2697.450

211

Accessories for interior installation
Cable clamp rails

3

2038.200

Swing frame SR 11 U

1

2027.200

2037.200
2027.200 *

–

2038.200
2027.200

2037.200
2027.200 *

–

223
HB 30, 1021

Lock inserts
Standard double-bit lock insert may be exchanged for 27 mm (1.06
) lock inserts, version A, see page 246 and Ergoform-S lock system – see page 245
* Two swing frames may be installed. Other accessories from page 200 or see index.
To order in primed RAL 7044 please add the extension .800 to the Part No., and for versions painted in textured RAL 7035, please use extension .500.
Delivery times available on request.
Systems for the human/machine interface

187

Console systems

To order in primed RAL 7044 please add the extension .300 to the Part No., and for versions spray-finished in textured RAL 7035, use extension .500.
Delivery times available on request.

Pedestals
H x W 670 x 800 mm (26.38
 x 31.50
)

H x W 670 x 1200/1600 mm (26.38
 x 47.24/62.99
)

800
1.5

797

1200/1600

724

1124/1524

700

50

50

33

33.5

525/725

50

AP 2600.600 / AP 2610.600

50

AP 2620.600 / AP 2630.600 / AP 2640.600 / AP 2650.600

D 400 mm (15.75
)

D 400 mm (15.75
)

120

16

100

Ø10

16

50

12

50

12

25

120

100

50

25

525/725

1100/1500

50

Ø10

50
700

40

25

40

25

10

1100 (1500)

1.5

10

33.5

300

300

630

630

58

597 (797)

595 (795)
5

AP 2600.600

AP 2620.600 / AP 2630.600

D 500 mm (19.69
)

D 500 mm (19.69
)
120
100

16

Ø10

50
700

40

25

40

1100 (1500)
10

25

1.5
50

Ø10

50

595 (795)

1.5

10

16

5

597 (797)

24

100
50

24

120

597 (797)

595 (795)
5

AP 2610.600

188

AP 2640.600 / AP 2650.600

Systems for the human/machine interface

Console systems AP
Technical details

D 400 mm (15.75
)

D 500 mm (19.69
)

500

47.5

24

i.L. 270
400

AP 2600.600 / AP 2620.600 / AP 2630.600

670

70

557

532

50

30

50

max. 407

120

70

373

472

440

557

575

670

600

370

i. L. 340

30

30

24

24

AP 2610.600 / AP 2640.600 / AP 2650.600

Mounting panel for D 400 mm (15.75
)
12.5

Console systems

i.L. = Clearance width

575

600

12.5

10

12.5

1

20

90

90

20

715/1115/1515
1 = Does not apply to AP 2600.600

Mounting panel for D 500 mm (19.69
)
16.5
16.5

19

20.5

101.5

10.2

532

40.5

10.2

3

8

24

19

36

702/1102/1502

Systems for the human/machine interface

189

Pedestals
Side view

H x D 200 x 850 mm (7.87
 x 33.46
)

370
55.5

460
393

4

270

200

19.5

12.5

640/1040/1440

X

320

46

700/1100/1500
50

420

660/1060/1460

12° 2

50

38

120

125

800/1200/1600
120

41

270
758.5
820

10.5

850

1

2

View in X direction
148.5
i.L. 742/1142/1542

148.5
32

38

32

1 = Does not apply to AP 2611.200
2 = Does not apply to AP 2611.200 / AP 2641.200

50
1

365

380

17

AP 2611.200 / AP 2641.200 / AP 2651.200

2

6.5

797/1197/1597

13.4

i.L. = Clearance width

39

25

1 = Does not apply to AP 2611.200 / AP 2641.200
2 = Does not apply to AP 2611.200

Side view
470

38

200

19.5

12.5

46

X

640/1040/1440
50

420

41

270
758.5

420

660/1060/1460

320

700/1100/1500

125

100

460
393

55.5

370

50

120



800/1200/1600
120

12° 2
4

H x D 200 x 950 mm (7.87
 x 37.40
)

100

820

10.5

950

1

View in X direction
2

148.5

148.5
32

38

32
i.L. 742/1142/1542
50

1 = Does not apply to AP 2613.200

1

17

380

AP 2613.200 / AP 2643.200 / AP 2653.200

365

2 = Does not apply to AP 2613.200 / AP 2643.200

2

39

13.4

25

6.5

797/1197/1597
1 = Does not apply to AP 2613.200 / AP 2643.200
2 = Does not apply to AP 2613.200

190

Systems for the human/machine interface

Console systems AP
Technical details
Consoles

317.5

387.5

286.5

X

407

Y

T1

55.5

6.5

11°

42

270
370

55.5

T1

52.5

353.5

300

430

T2

300

407

T3

Y

359

X

353.5

300

T2

325

430

797/1197/1597
742/1142/1542

26

T3

350

800/1200/1600

356.5

26

50

View in Y direction

H x D 430 x 500 mm
(16.93
 x 19.69
)

H x D 430 x 400 mm
(16.93
 x 15.75
)

24
30

50

11°

340
440
470

AP 2612.600 / AP 2642.600 /
AP 2652.600

View in X direction

AP 2614.600 / AP 2644.600 /
AP 2654.600

797/1197/1597
733/1133/1533

32

304/504

1

2

68

422/622

Depth 400 mm (15.75")
Depth 500 mm (19.69")
300 (11.81)
195 (7.68)
110 (4.33)
300 (11.81)
400 (15.75)

T1 = vertically hinged 3 U
T2 = vertically hinged 6 U
T3 = vertically hinged, max.
T1 = static, max.

32

1 = Only for AP 2649.600 / AP 2652.600 /
AP 2654.600 / AP 2664.600
2 = Does not apply to AP 2612.600 /
AP 2614.600 / AP 2647.600 / AP 2662.600

View in Z direction

H x D 630 x 500 mm
(24.80
 x 19.69
)
with deep rear door

Console systems

H x D 430 x 500 mm
(16.93
 x 19.69
)
with deep rear door

387.5
106

356.5

100

26

387.5
106

797/1197/1597

356.5
52

26

148.5

24

99.5
340

30

1 = Only for AP 2649.600 / AP 2664.600 /
2 = Only for AP 2663.600 / AP 2664.600 /
AP 2648.600 / AP 2649.600

546

AP 2662.600 / AP 2663.600 /
AP 2664.600

99.5
2

7°

440

440
546

148.5

1

50

50

=

348/548

55.5
146
6.5

84.5

42

11°

340

=

Y

423.5/623.5

550

500

X
Z

24
30

559

630

407

Y

55.5

400

6.5

84.5

42

300

X

215

300

Z

353.5

500

146

359

430

52

455

607

496
465
500

100

732/1132/1532

AP 2647.600 / AP 2648.600 /
AP 2649.600

Mounting panel for D 400 mm
(15.75
)

Mounting panel for D 500 mm (19.69
)
60
11.5

60

23
23

20

6
19

9

348/548

2.5

11.5

12.5
90

90

11

11.5
325

t=3

20

9

350

12.5

1

9

11.5

44

12.5

10

60°

Systems for the human/machine interface

23

1 = Does not apply to AP 2612.600

11.5

715/1115/1515
727/1127/1527

191

AP 2670.600 / AP 2672.600

AP 2666.600 / AP 2668.600

B2

B2

B3

B3

480
498
447

20 °

B7

B6

1.5

630

790

557

50

B5

1.5

B4

370

B1

400

B4

33

140

72

B5

50
1.5

47 (87) (127)

358 – 368
47

70

675

960

60

1

1.5

270

50

B1
1 = Hinge does not apply to AP 2670.600

78.5

78.5
11

8

25

11
52.5

51

40

6.5

16.5

12.5

B8

61

16.5

20

780

420

498

2

2 = Hinge does not apply to AP 2666.600 / AP 2668.600

52.5

12.5

31
B2

40

11

52.5

52.5
31

27.5

F2
F1

Configuration:
Enclosure, solid rear and sides, door or
double door at front,
Console lid with lid stay,
Two-piece gland panel,
Mounting panel.

Height in mm (inches)

PU

Width (B1) in mm (inches)

960 (37.80)

Page

600 (23.62)

800 (31.50)

2666.600

2668.600

2670.600

2672.600

B2 = Width

597 (23.50)

797 (31.68)

997 (39.25)

1197 (46.26)

B3 = Clearance width, top

544 (21.42)

744 (29.29)

944 (37.17)

1144 (45.04)

B4 = Clearance width, front

524 (20.63)

724 (28.50)

924 (36.38)

1124 (44.25)

B5 = Clearance width, bottom

500 (19.69)

700 (27.56)

900 (35.43)

1100 (43.31)

B6 = Width of door, left

–

–

495 (19.49)

595 (23.43)

B7 = Width of door, right

–

–

497 (19.57)

597 (23.50)

B8 = Punched length

500 (19.69)

700 (27.56)

900 (35.43)

1100 (43.31)

F1 = Mounting panel width

530 (20.87)

730 (28.74)

930 (36.61)

1130 (44.49)

F2 = Distance between mounting holes

475 (18.70)

675 (26.57)

875 (34.45)

1075 (42.32)

1

1

2

2

51.5 (115.74)

62.5 (137.79)

79.5 (175.27)

90.0 (198.41)

Depth in mm (inches)

1000 (39.37)

1200 (47.24)

400 /480 (15.75/18.90)
1

Part No. AP

Doors
Weight kg (lbs)
Accessories for external mounting
Base/plinth SO

Height 100 mm (3.94
)

1

2911.200

2901.200

2891.200

2921.200

208

Height 200 mm (7.87
)

1

2912.200

2902.200

2892.200

2922.200

208

Cross member, adjustable AP

2

2697.450

Aluminum strips AP

3

2676.000

2678.000

2682.000 *

2682.000

211

3

2036.200

2038.200

1805.200

2037.200

223

2027.200

HB 30,
1021

230

Accessories for interior installation
Cable clamp rails PS
Swing frame SR, 11 U

1

–

2027 .200

2027 .200

* should be shortened by 200 mm (7.87
).
To order primed one-piece consoles in RAL 7044, please add the extension .800 to the Part No., and for textured RAL 7035,
please use extension .500. Delivery times available on request.
192

Systems for the human/machine interface

One-piece consoles AP

Console systems

Sheet steel

Accessories:
see page 200 – 201
or see index.

Material:
Sheet steel
Enclosure: 1.5 mm (16 ga)
Door and console lid:
2.0 mm (14 ga)
Mounting panel: 3.0 mm
(11 ga)
Finish:
Enclosure, door and console
lid: E-coat-primed in RAL 7044
and powder-coated on the
outside in textured RAL 7032
Mounting panel and gland
panels: Zinc-plated

Lock systems
Console lid:
Standard double-bit lock insert
may be exchanged for 47 mm
(1.85
) lock inserts, type D,
see page 246.
Door:
Standard double-bit lock insert
may be exchanged for 27 mm
(1.06
) lock inserts, type A,
see page 246
and Ergoform-S lock system,
see page 245.

Protection ratings:
IP 55 to EN 60 529 /10.91
Complies with UL and NEMA
Type 12

Systems for the human/machine interface

Combination of one-piece
console with Optipanel.

193

Universal console AP 2695.600

11°

1196
1

44.3

44.3

1

1 = from 200 to 400 mm (7.87
 to 15.75
),
adjustable in 25 mm (0.98
)
increments

25.5

502

25.5

502

835

763

i. L. 512

635

604

805

1300

1273.5

i. L. 512

i. L. 1212

173.5

28

i. L. 1212

1300

1273.5

i. L. 512

48

17

11°
i. L. 512

23

42

440

365

i. L. 515

23

23

73

42.5

440

365

i. L. 515

499

592

42.5

592

417.5

600

417.5

600

Mounting panel

24.5

Universal console AP 2694.600

1 = from 200 to 400 mm (7.87
 to 15.75
),
adjustable in 25 mm (0.98
)
increments

i.L. = Clearance width

Order examples

AP 2694.600 and
AP 2696.200
(desk section)

AP 2694.600 and
AP 2696.200
(desk section)

AP 2694.600 and
MC 4757.000
(drawer)

AP 2695.600

Technical details for keyboard drawer
and desk section, see page 231.
Supply includes
Enclosure
Doors* top, bottom, rear

Material

Finish

Sheet steel 1.5 mm (16 ga)

E-coat primed in RAL 7044
Powder coated in textured RAL 7032 on the outside

2.0 mm (14 ga)

Mounting panel

3.0 mm (11 ga)

Zinc-plated

Three-piece gland panels

1.5 mm (16 ga)

Zinc-plated

Aluminum section

RAL 5018

AP 2695.600, 2 design strips

Protection ratings IP 55 to EN 60,529 / 10.91, complies with UL and NEMA Type 12
* With short bottom door (AP 2695.600) the drawer or desk section (see page 231) should be fitted in order to preserve the protection category.
Part No.

Weight kg (lbs)

Short bottom door

H x W x D 600 x 1300 x 600 mm (51.18
 x 23.62
 x 16.96
)

AP 2694.600

77.0 (169.75)

Tall bottom door

AP 2695.600

75.8 (167.11)

Page

Accessories
Base/plinth

Height 100 mm (3.94
)

SO 2807.200

208

Height 200 mm (7.87
)

SO 2808.200

208

Cross member, adjustable

AP 2697.450

211

Cable clamp rail

PS 4191.000

223

180 ° hinges

PS 4189.000

241

Cable entry plates

PS 4320.700

216

Top door with studs left and right for installing vertical perforated mounting strips SZ 2310.038 and horizontal support strips SZ 2325.000 to be mounted on
top (see HB 30, page 950).
In terms of interior installation, AP universal consoles are similar to free-standing enclosure ES 5000 – in other words, many accessory components
(Part No. PS) will fit.
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm (1.06
) lock inserts, type A, see page 246
and Ergoform-S lock system, see page 245.
To order in primed RAL 7044, please add the extension .800 to the Part No., and for textured RAL 7035, please use extension .500.

194

Systems for the human/machine interface

Universal console AP

Console systems

Sheet steel

Accessories:
see page 200 – 201
or see index.

Mobile workstation
Plenty of space for tower PCs,
printers and paper.
Part No. see page 267.

Systems for the human/machine interface

Desk section
For installing display and
control components, keyboards
etc. Part No. see page 231.

Drawer
for mouse and keyboard with a
maximum width of 500 mm
(19.69
). Part No. see page
231.
195

AP 2685.600 / AP 2686.600

AP 2683.600 / AP 2684.600

B2

B2

B3

B3

480
498
447

20 °

1.5
1.5

630

790

557

B5

270

50

B4

B4

33

50
B7

B6

140

72

B5

50
1.5

47 (87) (127)

358 – 368
47

70

675

960

60

1

370

B1

1.5

400

B1
1 = Hinge does not apply to AP 2685.600

78.5

78.5
11

51

12.5

60

11

52.5

33.5

73.5
25

40
375

2

458

498

M6 x12

37

780

83

B8

11

12.5

40

B2
2 = Hinge does not apply to AP 2683.600 / AP 2684.600

52.5

23.5

F2

27.5

F1

Supply includes:
Enclosure, solid rear and sides, door or
double door at front, with locking rod,
Console lid with lid stay and stainless steel
cam latched in the enclosure,
Two-piece gland panel,
Mounting panel, zinc-plated.
Height in mm (inches)

PU

Width (B1) in mm (inches)
Depth in mm (inches)
1

Part No. AP
B2 = Width

960 (37.80)

960 (37.80)

960 (37.80)

960 (37.80)

600 (23.62)

800 (31.50)

1000 (39.37)

1200 (47.24)

400/480
(15.75/18.90)

400/480
(15.75/18.90)

400/480
(15.75/18.90)

400/480
(15.75/18.90)

2683.600

2684.600

2685.600

2686.600

597 (23.50)

797 (31.68)

997 (39.25)

1197 (46.26)

B3 = Clearance width, top

544 (21.42)

744 (29.29)

944 (37.17)

1144 (45.04)

B4 = Clearance width, front

524 (20.63)

724 (28.50)

924 (36.38)

1124 (44.25)

B5 = Clearance width, bottom

500 (19.69)

700 (27.56)

900 (35.43)

1100 (43.31)

B6 = Width of door, left

–

–

495 (19.49)

595 (23.43)

B7 = Width of door, right

–

–

497 (19.57)

597 (23.50)

B8 = Punched length

500 (19.69)

700 (27.56)

900 (35.43)

1100 (43.31)

F1 = Mounting panel width

530 (20.87)

730 (28.74)

930 (36.61)

1130 (44.49)

F2 = Distance between mounting holes

475 (18.70)

675 (26.57)

875 (34.45)

1075 (42.32)

1

1

2

2

52.0 (114.64)

65.2 (143.74)

79.5 (175.27)

90.3 (199.07)

Doors
Weight kg (lbs)

Page

Accessories
Base/plinth SO

Height 100 mm (3.94
)

1

2865.000

2869.000

2867.000

2870.000

209

Height 200 mm (7.87
)

1

2875.000

2878.000

2885.000

2886.000

209

Lock systems
Standard double-bit lock insert of locking rod may be exchanged for 27 mm (1.06
) lock inserts, version A,
see page 246 and Ergoform-S lock system, see page 245.
To order the one-piece consoles in 1.4404 (Type 316L), the Part No. should end in .500. Delivery times available on request.

196

Systems for the human/machine interface

One-piece consoles AP

Console systems

Stainless steel

Accessories:
see page 200 – 201
or see index.

Material:
Type 304 stainless steel
Enclosure: 1.5 mm (16 ga)
Door or double door and
console lid: 2.0 mm (14 ga)
Mounting panel:
3.0 mm (11 ga) sheet steel
Finish:
Enclosure, door and console
lid: Brushed, 120 grain
Mounting panel: Zinc-plated
Protection category:
IP 55 to EN 60 529/10.91
Complies with UL and NEMA
Type 12.

Levelling feet
for base/plinth to compensate
for floor irregularities.
Part No. see page 214.

Systems for the human/machine interface

IP 67 mouse and mousepad
Part No. see page 266.

Wall console, stainless steel
mounted on the rear panel
for an additional operating
housing. Part No. see page 95.

197

AP 2689.600 front door, tall

365

i. L. 515

48

835

763

i. L. 512

635

1

44.3

44.3

25.5

502

1 = from 200 to 400 mm (7.87
 x 15.75
),
adjustable in 25 mm (0.98
) increments

25.5

604

805

1196

i. L. 1212

1300

1273.5

i. L. 512

1

502

73

17

11°

173.5

28

i. L. 1212

1300

1273.5

i. L. 512

23

42

11°
i. L. 512

23

23

440

440

365

i. L. 515

499
42.5

592

42.5

592

417.5

600

417.5

600

Mounting panel

24.5

AP 2688.600 front door, short

i.L. = Clearance width

1 = from 200 to 400 mm (7.87
 x 15.75
),
adjustable in 25 mm (0.98
) increments

Order examples

AP 2688.600
Front door, short
AP 2690.000
(desk section)

AP 2688.600
Front door, short
AP 2690.000
(desk section)

Configuration:
Enclosure, solid top and sides,
Rear door,
Three-piece gland panels,
Mounting panel.

AP 2688.600
Front door, short
AP 2691.000
(keyboard drawer)

AP 2688.600
Three-piece front:
Top door inclined by 11°, r/h hinge.
Empty space for
– Desk section AP 2690.000
– Keyboard drawer AP 2691.000.
Bottom door, r/h hinge.
PU

AP 2689.600
(front door, tall)

AP 2689.600
Two-piece front:
Top door inclined by 11°, r/h hinge.
Bottom door, r/h hinge.

Universal console
with short front door

Page
with tall front door

Width in mm (inches)

600 (23.62)

600 (23.62)

Height in mm (inches)

1300 (51.18)

1300 (51.18)

500 (19.69)

500 (19.69)

Depth in mm (inches)
1

Part No. AP
Weight kg (lbs)

2688.600

2689.600

83.3 (183.64)

84.5 (186.29)

Essential accessories
Desk section AP

1

2690.000

–

231

or
Keyboard drawer AP

1

2691.000

–

231

Height 100 mm (3.94
)

1

2868.000

2868.000

209

Height 200 mm (7.87
)

1

2876.000

2876.000

209

4

2908.000

2908.000

210

Accessories for external mounting
Base/plinth SO
Base/plinth trim, modular SO

Lock systems
Standard double-bit lock insert may be exchanged for 27 mm (1.06
) lock inserts, version A, see page 246
and Ergoform-S lock system, see page 245.
For universal consoles in 1.4404 (Type 316L), the Part No. should end in .500. Delivery times available on request.

198

Systems for the human/machine interface

Universal consoles AP

Console systems

Stainless steel

Accessories:
see page 200 – 201
or see index.

Material:
Type 304 stainless steel
Enclosure: 1.5 mm (16 ga)
Door: 2.0 mm (14 ga)
Mounting panel:
Sheet steel 3.0 mm (11 ga),
zinc-plated
Finish:
Brushed, 240 grain
Protection ratings:
IP 56 to EN 60 529/10.91
Complies with UL and NEMA
Type 12.
Connector gland
for 3 cables up to Ø 6 mm
(0.24
).
Part No. SZ 2400.500,
see page 220.
Systems for the human/machine interface

Rail for EMC shielding
bracket and strain relief
Part No. see Innovations 2003,
page 28.

Mousepad support
For desk section, mouse and
mousepad IP 67/NEMA 6.
Part No. see page 266.

199

Rittal system accessories . . .
. . . for even more solutions

Solution diversity is our business. Thanks to many years of exper-

human/machine interface. What is more, our extensive range of

tise, knowledge and our close contact with customers, we pro-

system accessories offers you new opportunities and possibilities.

duce solutions that work. For example, system climate control that
ensures reliability for electronics in cabinets and enclosures for

Simply locate onto the connection plate of
the Command Panel,
see page 219.

Connector gland: Simply insert the preassembled cables and screw-fasten,
see page 220.

Utility shelf for measuring tools, writing
equipment, mouse, scanner, small parts
etc. see page 229.

Handle set and conduit holder solve a
variety of requirements, both individually
and in combinations, see page 235.

System window – whenever stringent
hygiene requirements apply,
see page 241.

Interface door for secure accommodation
of sockets, computer ports or drives,
see page 240.

TFT monitor – quickly installed, ideal for
industrial use,
see page 265.

IP 65 desktop keyboard – for tougher
conditions or when hygiene is an issue,
see page 264.

Cable glands and other useful system
accessories,
see Innovations 2004, from page 22.

200

Systems for the human/machine interface

Climate control

202 – 205

VIP small air conditioners

202 – 203

Rear cooling panel, modular

204

Overview of climate control

205

Input/output devices

264 – 266

Accessories

206 – 273

Base/plinth

206 – 213

Base

214 – 219

Cable routing

220 – 223

For IW monitor housings

224 – 225

Wall/enclosure connectors

226 – 230

Front design

231 – 234

Handles

235 – 239

Interface door, interface box

240

Windows

241 – 243

Lock systems

244 – 249

Roof/interior installation

250 – 256

Component shelves/drawers

256 – 263

Mobile workstation

267
268 – 269

Grounding/swing frames

270 – 271

19
 configuration

272 – 273

Accessories / climate control

Lighting/power supply

Even more diversity, even more ideas.
Enter our world of solutions. Clearly
documented in Rittal Handbook 30.

201

SK 3201.100
Condenser version LEFT

The new VIP SK small air conditioner
were developed especially for cooling
the VIP 6000 command panel. In
addition, VIP small air conditioner also
offer a space-saving, economical
solution for the climate control of small
enclosures where small heat loads are
generated by the system.

SK 3202.100
Condenser version RIGHT
32

6

52

6

52

5

46
8

28

3
18

10
5

296

353.5

353.5

60

3

18

1

1 = Distance from installed equipment at
least 60 mm (2.36
)

Configuration:
Fully wired ready for connection and premounted on an aluminum rear panel to fit
VIP 6000 operating housing 7 U.

Performance diagram
SK 3201. . . . / SK 3202. . . .
(DIN 3168) (50 Hz)

Performance diagram
SK 3201. . . . / SK 3202. . . .
(DIN 3168) (60 Hz)

450

500

400

450
400

350
300
.
QK

250

.
QK

40

30

100

200
Ti

30

35

40

100
50
20

45

Tu
T.u = Ambient temperature (°C)
QK= Continuous useful cooling output (W)
Ti= Enclosure internal temperature (°C)

20
25

30

35

40

45

Tu
T.u = Ambient temperature (°C)
QK= Continuous useful cooling output (W)
Ti= Enclosure internal temperature (°C)

Part No. SK

3201.100

3202.100

Condenser design

left

right

Rated operating voltage V/Hz

230, 50/60
H 353,5 (13.92)
W 526 (20.71)
D 105 (4.13)

Dimensions in mm (inches)
.

Useful cooling output Q K
to DIN 3168

L 35 L 35 225 W/ 270 W (770/920 BTU)
L 35 L 45 160 W/ 200 W (545/680 BTU)

Rated current max.

1.5 A/1.5 A

Start-up current

1.9 A/2.0 A

Pre-fuse T

4.0 A/4.0 A

Power consumption Pel
to DIN 3168

.
Refrigeration factor ε = Q K/Pel

L 35 L 35
L 35 L 45

285 W/ 300 W
315 W/ 325 W

L 35 L 35

0.8 / 0.9

Refrigerant

R134a, 170 g (6 oz)

Permissible operating pressure p. max.

27 bar /392 psi

Temperature and setting range

+20°C to +45°C/+68° to 113°F
External circuit IP 34; NEMA Type 2
Internal circuit

IP 54; NEMA Type 12

Duty cycle

100 %

Type of connection

Terminal strip

Weight

10.5 kg/23.15 lbs

Color
Air throughput of fans

30
Ti
25

150

25
25

50
45
40
35

300
250

35

150

50
20

350

50
45

200

Protection category to
EN 60 529/10.91

10
5

1

296

Specification:
● For optimum space utilization inside the
VIP 6000 enclosure, we offer two cooling
unit versions with the condenser
mounted on the left or right, which are
pre-mounted on the rear panel of the VIP
enclosure.
● Customized solutions on other small
enclosures are also possible.
● Optimum ratio of useful cooling output to
cooling unit volume.
● Temperature control via internal
electronics.
● Monitoring of the internal temperature of
the enclosure via a floating contact on
the terminal strip.

5
46

60

296

32

Rear panel aluminum, vent grille RAL 7035
External circuit 235 m3/h / 270 m3/h (137/158 cfm)
Internal circuit

Temperature control

160 m3/h / 180 m3/h (94/105 cfm)
Electronic control (factory setting +35°C/+95°F)

Special voltages available on request. We reserve the right to make technical modifications.
Accessories
Temperature indicator

202

PU

Page

1

HB 30,
p. 570

3114.100

Systems for the human/machine interface

Climate control

Climate control

VIP small air conditioner, useful cooling output 225 W/920 BTU

Accessories:
see page 200 – 201
or see index.

VIP small air conditioner
have the following approvals:
● UL, CUL
● CE

Digital temperature indicator
for visualisation of the
enclosure internal temperature,
see Handbook 30, page 570.

Systems for the human/machine interface

Spacer and built-in trim panel
for problem-free installation of
the temperature display.
Part No. see page 234.

203

Climate control
Rear cooling panel
Rear cooling panel for retro-fitting
existing enclosures.

Rear cooling panel, modular
For VIP 6000 and Optipanel, externally
mounted
Significantly increases the dissipation of
heat loss from the enclosure.
Apart from cooling fins on the outside, this
is achieved by a combination of cooling
fins and screw channels on the inside,
which ensure optimum heat absorption and
dissipation.
The rear cooling panel consists of cooling
modules and compensating panels, which
are used depending on the enclosure
width.

Part No.
CP
7 U x 19

6004.000
VIP 6000
to specifications* 6004.009
7 U x 19

6004.100
Optipanel
to specifications* 6004.109
*Please additionally state on the order:
● Number and dimensions of front panels
● Number of cross members/sealing bars
or
● Part Number of enclosure.
Extended delivery times.
To fit

Material:
Extruded aluminum section,
natural anodized

Size

Note:
When installing the pull-out keyboard
CP 6002.100 (see page 263) in
● VIP 6000, design version 3.1,
No. 1
● Optipanel, design version 2.1,
No. 3
the 11 mm (0.43
) cooling fins protruding
into the enclosure and screw channels may
be milled off.
Please additionally specify on the order:
● With fitted pull-out keyboard
CP 6002.100 + installation position.
Accessories:
Spring nuts M5, CP 6108.000,
see page 255.
Cable tie attachment, CP 6059.500,
see page 221.

2
1

3
1

50

4

1

11

1

5


 Profile of rear cooling panel. Unless otherwise specified, the cooling fins are positioned
vertically.

 Width compensating panel, mounted in the center with an even number of heat sinks, or




204

on the right with an uneven number. By rotating the entire cooling panel through 180°
this position may be modified individually.
Spring nut M5, CP 6108.000 for interior installation on screw channels
Overall depth of the enclosure is increased by 13 mm (0.51
)
Front panel width for determining the cooling modules and compensating panel

Systems for the human/machine interface

Rittal climate control systems . . .
. . . for process protection

Outstanding quality, favourable prices, exceptionally effective operating ratios and environmentally friendly – that's Rittal system climate control. These convincing criteria originate from a broad
base: A consistent orientation towards customer requirements,
highly skilled development teams, a platform-based strategy, and
state-of-the-art production techniques.

e Control
osure Climat
Perfect Encl

Perfect
Climate
2004
sive
Comprehenoling
process co

In our new brochure “Perfect
Climate 2004”, you will find our
entire range of products for
comprehensive process
protection through cooling,
heating and monitoring.
Please request a copy of our
latest brochure – see back
page for contact information.

Climate control

ion
rat ts
e
i
n
ge r un
ew-filte
n
ing and
lud fanc
n
I of

205

Accessories
Base/plinth
Base/plinth components
front and rear for TS
Base/plinth component consisting of one
trim panel and two pre-configured corner
pieces. In 200 mm (7.87
) high base/plinth
components, one trim panel is divided into
two for cable entry.
Configuration:
1 set =
2 base/plinth components,
4 cover caps,
4 screws and captive nuts M12
for mounting on the enclosure.

For
enclosure
width
mm (inches)

PU
set

600 (23.62)

1

Part No. TS
100 mm 200 mm
(3.94
)
(7.87
)
high
high
8601.600 8602.600
Color
RAL
7022
9005

Material
Components
Caps

Sheet steel
Plastic

Accessories:
Base assembly plate SO 2817.000,
see page 215.

Base/plinth trim

Part No. TS
100 mm 200 mm
(3.94
)
(7.87
)
high
high
7022 8601.060 8602.060
7022 8601.080 8602.080

For
enclosure
Color
depth
RAL
mm (inches)

side, for TS
For mounting between the base/plinth
components. With 200 mm (7.87
) height,
two 100 mm (3.94
) base/plinth trims may
also be used. In order to stabilize bayed
base/plinth components, base/plinth trim
(100 mm (3.94
) high) may be installed
rotated through 90°.

600 (23.62)
800 (31.50)

Accessories:

Material:
Sheet steel

Assembly bolts for cable clamp rails
SO 2819.000, see page 210.

Configuration:
1 set =
2 base/plinth trim panels
including material for attaching
to the base/plinth components.

As an alternative,
can be used:
Base/plinth or
base/plinth, vented, in RAL 7035,
see Handbook 30, page 882.

92.5
80
 14

18 x 14

100

22

62.5

Plinth, 100 mm (3.94
) high
47.5

30

32.5

17.5

62.5

T5

T4

T3

T2

T1

50

Ø 9.4

15 x 10

Plinth, 200 mm (7.87
) high

30

200

B5

B3

B4
B3
B2
B1

Description of the hole patterns
B1/T1 = External dimensions
B2/T2 = For screw-fastening in the thread
of the enclosure corner piece from
below
B3/T3 = For screw-fastening via captive
nuts to the enclosure base
from below or above
All holes (B2 – B4 / T2 – T4) may be used
for screw-fastening to the base.

206

Base/plinth components front/rear
Width mm (inches)
B1
B2
600 (23.62)
600 (23.62) 535 (21.07)

B3
475 (18.70)

B4
415 (16.34)

B5
570 (22.44)

Base/plinth trim, side
Depth mm (inches)
T1
600 (23.62)
569 (22.04)
800 (31.50)
769 (30.28)

T3
474 (18.66)
674 (26.53)

T4
444 (17.48)
644 (25.35)

T5
568 (22.37)
768 (30.24)

T2
534 (21.03)
734 (28.90)

Systems for the human/machine interface

Accessories
Base/plinth
Base/plinth trim
with brush strip for TS
The supplement to the modular base/plinth
concept (see HB 30, page 878).
May also be exchanged for the front or rear
trim panel of the base/plinth components
100 or 200 mm (3.94
 or 7.87
) high. By
rotating the trim panel, the hammer-head
strip for cable attachment may optionally
be positioned at the top or bottom.

Height

Part No. TS
RAL 7022 RAL 7035

Width

100 mm 600 mm
8601.610
(3.94
) (23.62
)

8601.615

Accessories:
Cable ties for quick assembly,
see page 220.

Material:
Sheet steel
Configuration:
Brush strip

Configuration

Material

1 trim panel

Sheet steel
Extruded
aluminum
section

Width
600 mm
(23.62
)

Part No. PC
8360.920

Additional parts
Base/plinth components, front and rear and
base/plinth trim, side,
see opposite page.
592

7035

9

56

2 designer
trim panels

Color
RAL
7015

Height
200 mm
(7.87
)

212

To continue the design of the
● bottom front door of PC enclosures
based on TS,
● door of the IW enclosure.
The base/plinth trim is screw-fastened to
the corner pieces of the TS base/plinth
components from the outside.

100

Base/plinth trim PC

362

Base/plinth, stationary
Adapted to the design of the enclosure,
Height 100 mm (3.94
), front projection,
with numerous possibilities.

Configuration

Version

Material

2 depth stays

With attachment facility for
● Twin castors PC 4634.500,
see page 213,
● Levelling feet PS 4612.000,
see page 214,
● Assembly bolts for cable
clamp rails SO 2819.000,
see page 210,
● Support bracket PS 4183.000,
see Handbook 30, page 979.
with 2 cover caps
For screw-fastening to
depth stays
for screw-fastening to
depth stays

Sheet steel
2.0 mm/14ga

1 trim panel at
the rear
1 trim panel at
the front

Systems for the human/machine interface

For depth
600 mm (23.62
)
836 mm (32.91
)

Cast aluminum
Sheet steel
2.0 mm (14ga)
Aluminum
section

Part No. PC
8800.920
8800.930

Color
RAL
7035
textured

7035
7035
textured
7015

207

Accessories

45.2

280

Accessories
Base/plinth
Base/plinth, complete
Sheet steel
Consisting of:
Trim panels at the front and rear with fitted
corner pieces and side trim panels.
Material:
Sheet steel

Configuration
Corner pieces
Trim panels
front / rear

Color:
RAL 7022

Height
100 mm
200 mm
(3.94
)
(7.87
)
4
4
1 x 200 mm
(7.87
)
2
2 x 100 mm
(3.94
)

Trim panels
2
4
(sides)
Installation hardware including 4 screws
and captive nuts M12 for mounting on the
enclosure.

Base/plinth for ES-PC/AP universal console
For enclosures
Part No. SO
Width mm (inches)
Depth mm (inches) 100 mm (7.87
) high 200 mm (7.87
) high
600 (23.62)
500 (19.69)
2807.200
2808.200
600 (23.62)
600 (23.62)
2813.200
2814.200
600 (23.62)
800 (31.50)
2846.200
2847.200
Base/plinth for AP console systems/AP one-piece consoles
For enclosures/consoles
Part No. SO
Base/plinth
depth
Width
Depth
mm (inches) 100 mm (7.87
) high 200 mm (7.87
) high
mm (inches)
mm (inches)
600 (23.62)
400 (15.75)
370 (14.57)
2911.200
2912.200
800 (31.50)
400 (15.75)
370 (14.57)
2901.200
2902.200
800 (31.50)
500 (19.69)
440 (17.32)
2841.200
2842.200
1000 (39.37)
400 (15.75)
370 (14.57)
2891.200
2892.200
1200 (47.24)
400 (15.75)
370 (14.57)
2921.200
2922.200
1200 (47.24)
500 (19.69)
440 (17.32)
2851.200
2852.200
1600 (62.99)
400 (15.75)
370 (14.57)
2961.200
2962.200
1600 (62.99)
500 (19.69)
440 (17.32)
2863.200
2864.200
Accessories:
Assembly bolts for cable clamp rail,
see page 210.
Base assembly plate,
see page 215.

125
100

50

Ø 8.5

98

52.5

30
52.5

□ 14

22.5

25
T

18 x 14

100

Plinth, 100 mm (3.94
) high

30

37.5

12.5

125
100

200

2
62.5

62.5

32.5

32.5

98

37.5

12.5

98

25

Plinth, 200 mm (7.87
) high

B

T = Enclosure depth – 50 mm (1.97
)
W = Enclosure width

208

Systems for the human/machine interface

Accessories
Base/plinth
Base/plinth, complete

Height
100 mm 200 mm
(3.94
)
(7.87
)
–
2*

Configuration

Stainless steel
Consisting of:
Trim panels front and rear (for height
200 mm (7.87
) with corner pieces on one
side and removable trim panel) and trim
panels at the sides.

Corner pieces
Trim panels
2
2
front/rear
Trim panels (sides)
2
4
Installation hardware including 4 screws
and captive nuts M12 for mounting on the
enclosure.
* Corner pieces with removable trim panel,
to be fitted optionally at the front or rear.

Material:
Type 304 stainless steel
Finish:
Brushed

Accessories:
Levelling feet,
see page 214.
Base/plinth trim, modular
see page 210.
Base/plinth for PC/AP
For enclosures
Width mm (inches)
Depth mm (inches)
600 (23.62)
400 (15.75)
600 (23.62)
500 (19.69)
600 (23.62)
600 (23.62)
800 (31.50)
400 (15.75)
1000 (39.37)
400 (15.75)
1200 (47.24)
400 (15.75)

Plinth, 200 mm (7.87
) high

Accessories

50

100

Ø 9.4

T
14 x 18

50

Ø 9.4

14 x 18

50

30

30

T

100

25

12.5

37.5

98

100
100

50

100

25

98
12.5

37.5

2

200

98

Plinth, 100 mm (3.94
) high

Part No. SO
100 mm (3.94
)
200 mm (7.87
)
2865.000
2875.000
2868.000
2876.000
2855.000
2877.000
2869.000
2878.000
2867.000
2885.000
2870.000
2886.000

□ 14 x 14

62.5

62.5

62.5

32.5

32.5

32.5

B

T = Enclosure depth – 50 mm (1.97
)
B = Enclosure width

Systems for the human/machine interface

50

25

37.5

12.5

50

25

37.5

12.5

25

25

□ 14 x 14

62.5
32.5
B

T = Enclosure depth – 50 mm (1.97
)
B = Enclosure width

209

Accessories
Base/plinth

Configuration:
4 base/plinth trim panels

1000
(39.37)

1200
(47.24)

Material:
Type 304 stainless steel

Part No.
SO

800
(31.50)

For cable entry in the base/plinth
made from stainless steel, e.g. when using
levelling feet.
A perforated plate segment is 175 mm
(6.89
) wide. The system holes are suitable
for accommodating cable ties SZ
2597.000, for tidy cable routing.

Number of required
base/plinth trim panels for
For
base/plinth width*
enclosure
mm (inches)
depth
mm
(inches)
600
(23.62)

Base/plinth trim panel,
modular

400
(19.69)

3

4

5

6

2907.000

500
(15.75)

3

4

5

6

2908.000

600
(23.62)

3

4

5

6

2913.000

* if the surface is to be completely sealed.

Accessories:
Cable ties for quick assembly,
see page 220.
Levelling feet,
see page 214.

Part No. SZ

10
10

2819.000
2819.200

Accessories:
Cable clamp rail,
see page 223.

67

Material:
Hexagon steel, zinc plated,
width across flats 19 mm (0.75
)

PU

167*

The lockable assembly bolt allows the
installation of cable clamp rails and
standard C rails.

For base/plinth trim
height mm (inches)
100 (3.94)
200 (7.87)

117*

Assembly bolts
for base/plinth

* only for height 200 mm (7.87
)

Transport castors
For base/plinth, complete
For locating onto the base/plinth corner
piece 100 (3.94
) or 200 mm (7.87
) high
by raising or tilting.
Maximum permissible load per twin
castor:
Static: 100 kg (220.46 lbs)
Dynamic: 75 kg (165.35 lbs)

4570.000

Configuration:
1 set =
4 twin castors,
2 with, 2 without brakes.
Color:
RAL 7022

For

PC, ES, AP
style base/
plinth
TS style
base/plinth

Ground
clearance in
mm
(inches)

PU

Part No.

60
(2.36)

1 set PS 4570.000

100
(3.94)

1 set TS 8800.390

Additional parts
Base/plinth, complete
see page 208,
Base/plinth components, front and rear,
see page 206.

8800.390
210

Systems for the human/machine interface

Accessories
Base/plinth
Cross member
adjustable
To increase stability, the cross member is
positioned 138 mm (5.43
) above the base
frame of the enclosure at the front and rear.
For deeper enclosures, the rear part may
be extended and screw-fastened again.
For screw-fastening to the floor and
enclosure with mounting hole at the sides
front and rear. The castors and levelling
feet may be secured to the welded nuts
M12.

For

TS,
PC,
IW,
ES

Material:
Sheet steel, painted
AP

Color:
RAL 7015
Note:
For mobile use, the cross member must be
screw-fastened twice in the corners of the
enclosure.

Encl.
depth
mm
(inches)
400
(15.75)
500
(19.69)
600
(23.62)
800
(31.50)
400
(15.75)
500
(19.69)

L1

L2

644

275

744

375

844

475

PU

2

2

Part No.
TS/AP

8601.450

8601.680

1044 675
634

320

734

390

2

2697.450

Accessories:
Attachment opportunities for
● Twin castors PC 4634.500,
see page 213.
● Levelling feet PS 4612.000,
see page 214.

TS 8601.450 / .680
45°

70

70

50

132

50

10

50
L1

14

14 x 19

70

30

27.5

L2

10.5

Accessories

20

M12

AP 2697.450
45°

132

70

50

70

50

10

50
L1

26

M12

14

M12

25

20

14

13

Ø 10.5

13
L2

Systems for the human/machine interface

211

Accessories
Base/plinth
Base/plinth, mobile

For enclosures
Width
Depth
mm
mm
(inches) (inches)
600
400
(23.62) (15.75)
60
500
(23.62) (19.69)
600
600
(23.62) (23.62)
600
800
(23.62) (31.50)
800
400
(31.50) (15.75)
800
500
(31.50) (19.69)

For PC (based on ES)/AP enclosures,
Consisting of
2 axles of sheet steel each with 2 end caps
of die-cast zinc with plastic cover,
4 twin castors,
2 with, 2 without brakes.
2 cross braces of sheet steel.
Not assembled.
Load capacity per castor:
120 kg (264.55 lbs) static load
Total load:
360 kg (793.66 lbs) static load
Material:
Powder coated in RAL 7032/RAL 7035,
End cap RAL 7033/RAL 5018.

Part No. SO
RAL
RAL
7032/7033 7035/5018
2979.200

–

2980.200

–

2981.200 2981.235
2982.200 2982.235
2983.200

–

2984.200

–

75

German registered design
No. M 92 01 858
German patent no. 42 00 315
IR design no. DM/023580
with validity for DE, FR, IT

B1

R 110

T1

R 95
≈ 185

60

40

60

100
180

B1= Enclosure width
T1 = Enclosure depth + 150 mm (5.91
)

Base/plinth adaptor
for twin castors
Connection component for mounting twin
castors
● PC 4634.500
● PC 4634.000
● DK 7495.000
on the TS base/plinth.
Material:
Sheet steel, zinc plated.

PU
1 set

Part No. TS
8800.290

Additional parts
Base/plinth trim, side,
see page 206,
in all situations where a twin castor needs
to be mounted.

Configuration:
1 set =
4 base/plinth adaptors,
4 retaining screws M8 x 16 mm (0.63
),
4 hex nuts M8.
Note:
Floor clearance is increased by 3 mm
(0.12
) with fitted twin castors.

212

Systems for the human/machine interface

Accessories
Base/plinth
Twin castors
For mobile use, easily fitted.
Mounting thread M12 x 20.
Maximum
permissible static
load
(per castor):

Ground
clearance
mm (inches)

Lock

PU

Color

Part No.

40 kg (88.18 lbs)

50 (1.97)

4 without

1 set

Black

PS 4611.000

75 kg (165.35 lbs)

85 (3.35)

2 with,
2 without

1 set

TS, IW, ES, AP, AK, PC enclosure system,
pedestal base plate CP 6137.035 –
120 kg (266.54 lbs)
CP 6137.535

125 (4.92)

2 with,
2 without

1 set

Suitable for use with
TS, IW, PC enclosure system, pedestal
base plate CP 6137.035 – CP 6137.535
TS, IW, PC pedestals, CP 6141.XXX,
pedestal base plate CP 6137.035 –
CP 6137.535

Black
with grey
CP 6148.000
running surface
Black
PC 4634.500*
Turquoise/
PC 4634.000*
black

* For mounting on the TS base/plinth, the base/plinth adaptor for twin castors is required.

PS 4611.000

PC 4634.500

Reinforcement bracket
for TS base tray
For use as an additional stabiliser to the
clamping straps when populated
enclosures are screw-fastened via the base
tray to the base/plinth or pallet for
transportation purposes.

PC 4634.000

PU
4

Accessories

CP 6148.000

Part No. TS
8800.830

Material:
Sheet steel, zinc plated.
Configuration:
Installation hardware

Systems for the human/machine interface

213

Accessories
Base
Levelling feet
To compensate for height differences with
floor irregularities.
Thread length 40 mm (1.57
).
Assembly thread M 12 for direct screwfastening into the enclosure corner pieces.
Maximum permissible static load:
approx. 300 kg (661.38 lbs) per levelling
foot.

Thread
M12

PU
4

Part No. PS
4612.000

Additional parts
For mounting on the TS base/plinth:
Base/plinth adaptor TS 8800.220,
see below.

Floor clearance adjustable from:
18 mm – 43 mm (0.71
 – 1.69
)

M12

58

40

For:
● Baying system TS 8
● PC enclosure system
● Pedestal base plate
CP 6137.035 – CP 6137.535
● Industrial workstations

18

SW 19

Ø 47

Base/plinth adaptor for
levelling feet

PU
4

Part No. TS
8800.220

Connection component for fastening
levelling feet PS 4612.000 to the base/
plinth.
Material:
Sheet steel, zinc-plated.

Levelling feet
For mounting beneath the base/plinth,
complete, see page 208/209.
For unhindered access e.g. when cleaning
the floor, and to compensate for floor
irregularities.
Maximum permissible static load:
400 kg (881.84 lbs) / foot per foot
Floor clearance adjustable from:
M12: 55 mm – 125 mm (2.17
 – 4.92
)
M16: 45 mm – 120 mm (1.77
 – 4.72
)
Material:
Type 304 stainless steel

Levelling feet, 100 mm
(3.94
) high
For mounting on TS, IW and ES-PC
enclosures, for easier floor cleaning and to
compensate for floor irregularities.
Height 100 mm (3.94
).
Maximum permissible static load:
350 kg (771.61 lbs) / foot per foot
Floor clearance adjustable from:
85 mm – 115 mm (3.35
– 4.53
)

Thread
M12
M16

PU
1 set
1 set

Part No. SO
2889.000
2890.000

Configuration:
1 set =
4 levelling feet.
4 mounting panels,
including installation hardware.
German utility model
No. G 94 06 468

PU
1 set

Part No. SO
2859.000

Configuration:
1 set =
4 feet,
4 mounting panels with threaded bolts,
including installation hardware to the
enclosure.

Material:
Feet: Brass, nickel-plated
Threaded bolts and mounting panels:
Type 304 stainless steel
214

Systems for the human/machine interface

Accessories
Base
Foot rest
For relaxed, alternating working positions.
Material:
Connector pieces: Cast aluminum
Round tube section: Aluminum

Color
Weight
RAL
kg (lbs)
7035 textured/
natural
0.6 (1.32)
anodized

Part No.
CP
6145.100

Configuration:
Installation hardware

Trim panel
Facilitates variable positions when working
standing up.

Color
Weight
RAL
kg (lbs)
7035 textured 1.6 (3.53)

Part No.
CP
6144.100

Material:
Cast aluminum
Configuration:
Installation hardware for screw-fastening
between the cast feet front and rear.

Brackets for screw-fastening from below to
the cast feet with posidrive raised
countersunk screws M12.
Optionally with projection at the front, rear
or sides, with 11 mm (0.43
) diameter hole
for screw-fastening to the base.

Weight
kg (lbs)
0.7 (1.54)

Part No.
CP
6147.000

PU
4

Accessories

Base mount

Material:
Sheet steel, zinc plated.
Configuration:
Posidrive raised countersunk screws M12

Base assembly plate
For attaching the base/plinth to the floor
without moving the enclosure or
the bayed suite. For assembly screws up to
12 mm (0.47
) Ø.
Material:
Sheet steel, zinc plated.

Systems for the human/machine interface

PU
10

Part No. SO
2817.000

French patent no. 94 06 612
Dutch patent no. 193 235

215

Accessories
Base
Cable entry plates
for TS-PC
For simple, fast cable entry and sealing in
conjunction with:
● Cable entry grommets
● Connector grommets.
These are used instead of segments of the
standard, divided gland panels.
Material:
Type 304 stainless steel
Configuration:
Installation hardware

Enclosure
Cutouts
Part No.
width
PU
per plate
TS
mm (inches)
600 (23.62)
5
2
8700.600*
* For the cable entry plates in 1.4404
(Typ 316L), the order number should end
in .605.
Delivery times available on request.
Note:
EMC gland panels and accessories, see
Handbook 30.
US patent no. 5,422,436
German patent no. 42 07 281
European patent no. 0560119
with validity for FR, GB, IT, NL
Japan. Patent no. 2533052

Cable entry grommets
In conjunction with the cable entry plate,
simple and fast sealing of cables inserted
in the base area of enclosures.
Material:
Body: Polypropylene
Cover: Thermoplastic elastomer
Protection ratings:
IP 55 to EN 60 529/10.91

Connector grommets
In conjunction with cable entry plates, for
the entry of cables pre-assembled with
connectors.
Suitable for cable diameters from 8 to
36 mm (0.31
 to 1.42
).

Cables per
grommet
8
3
1
Packs of 25

max. Ø
mm (inches)
13 (0.51)
21 (0.83)
47 (1.85)

Part No.
PS
4316.000
4317.000
4318.000

US patent no. 5,422,436
German patent no. 42 07 281
European patent no. 0560119
with validity for FR, GB, IT, NL
Japan. Patent no. 2533052

PU
10

Part No. PS
4311.000

German patent no. 44 05 328

Material:
Outer cover: Polypropylene covered with
thermoplastic elastomer
Seal: Cellular rubber

Three examples from a wide range of possibilities
The diagrams show three TS examples for the positioning of cable
entry plates instead of segments of the three-piece gland panels
supplied as standard. This facilitates positioning to fit the mounting
panel.
Thanks to the enclosure symmetry, where dimensions permit, cable
entry plates may also be inserted in the enclosure depth, right and
left, parallel to the gland panels.

216

Systems for the human/machine interface

Accessories
Base
Foam rubber cable clamp
strip

PU
3 m (118.11
)

Part No. SZ
2573.000

For simple, quick sealing of the cable entry
between the gland panels. Particularly
suitable for identical cable cross-sections.
Cross-section: 30 x 30 mm (1.8
 x 1.8
)

Metal gland panel

With cutout
for

For individual cable entry, e.g. with:
● CP pillar, see page 148,
● IW enclosures, see page 156 – 159.

PU

Part No. KL
RAL 7035 RAL 7032

6

1158.500 1158.000

6

1158.560 1158.060

6

1158.540 1158.040

6

1158.530 1158.030

Connectors,
solid
Connectors,
16-pole
Connectors,
24-pole
Module panels
Solid, with
prepunched
holes M20

Material:
Sheet steel, painted

1

–

1581.100

Accessories:
Module panels for individual cable entry,
see Innovations 2003, page 11.

KL 1158.500
KL 1158.000
221

90
76

Accessories

72
72

76

202

Ø 4.5

KL 1158.530
KL 1158.030
221

90

202

Ø 4.5

SZ 1581.100
221
7
76

101

9
90

Systems for the human/machine interface

101

72

9.5

217

Accessories
Base
Plastic cable gland panels

Number
of
12
6
2
2

PG

for pillar and IW
With prepunched PG holes for cable
glands. Used for sealing standard gland
panels.
Temperature range: suitable for use from
–40°C to +70°C (–104°F to 158°F).

13.5
13.5
16
21

5

Part No.
KL
1581.000

5

1582.000

PU

Material:
ABS
Color:
RAL 7032

KL 1581.000

KL 1582.000
220
202

Ø5

PG
13.5

PG
21

PG
16

PG
13.5

PG
13.5

76

90

72

PG
13.5

PG
13.5

PG
13.5

PG
16

PG
21

PG
13.5

Enclosure reinforcement
For external or internal reinforcement of
enclosures of a corresponding size.
Smaller enclosures may also be mounted
directly without reinforcement.
Configuration:
Installation hardware for the enclosure and
support section plus 2 seals.

6143.310

For
Enclosure

Support arm
connection

Material

Color
RAL

Weight
kg (lbs)

Part No.
CP

B1 ≥ 300 mm (11.81
),
T1 ≥ 150 mm (5.91
)

CP-S

Type 304
stainless
steel

–

0.9 (1.98)

6143.310

CP-L

Sheet steel

7035

0.9 (1.98)

6143.210

CP-XL

Sheet steel

7032

2.2 (4.85)

6503.000

B1 ≥ 300 mm (11.81
),
T1 ≥ 150 mm (5.91
)
CP 6662.000
or AE (B1 = 600 mm
(23.62
),
T1 ≥ 210 mm (8.27
))
B = Width / T = Depth

9

9

7

69

110

145
260

40

82

Ø 40

Ø6
Ø9

9

110

6143.210

145

Ø 62

CP 6143.210
Ø 49

CP 6143.310

34
260

295

295

CP 6503.000
10

12.5

150

175

7

2

45°

100

CP-XL
112

6503.000

45°
525
590

218

Systems for the human/machine interface

Accessories
Base
Connection plate
With reinforcement plate
● For easy location of the Command Panel
onto the support arm or pedestal.
● Easily screw-fastened from the outside
after drilling 4 holes Ø 7 mm (28
).
● More space for cable entry plus
clamping bracket.
For assembling:
● VIP 6000 1)
● Optipanel 2)
● Sheet steel Command Panel 3)
to:
Support arm
system
components
Enclosure
attachment
Housing
coupling
Angle
coupling
10° tilting
adaptor
Tilting
adaptor
+/– 45°

1

CP-L

CP-XL

With
support
arm
connection
CP-XL
CP-L
CP-L

Color
RAL

Weight
kg (lbs)

Part No.
CP

7030 0.8 (1.76)
7030 0.7 (1.54)
7024 0.7 (1.54)

6528.300
6528.200
6528.210

Note:
The square support arm cutout can be
prepared on request.
Material:
Connection plate: Cast aluminum
Reinforcement plate: Sheet steel 6 mm
(0.24
)

CP 6525.5X0 CP 6130.600

Configuration:
Seals and installation hardware.

CP 6525.0X0 CP 6130.000

1) From a front panel width of 265 mm
(10.43
).
The CP-XL version cannot be used in
conjunction with installation depth 155 mm
and 295 mm (6.10
 and 11.61
).

CP 6526.0X0 CP 6040.000
CP 6527.0X0

–

CP 6529.0X0

–


 Pre-install screws, locate the enclosure,

2) From a front panel width of 220 mm
(8.66
) and installation depth of 150 mm
(5.91
).
3) Mounting surface area, minimum
W x D = 300 mm x 135 mm (11.81
 x 5.31
)
(e.g. Command Panel housing with door).

Mounting cutout CP-L/CP-XL

200

165

145

CP-XL
200
145

100.5

100.5

C

A

D

*

B

Ø7
79

Ø 5.5/10 deep

30.5

81

173

Optipanel 150 mm (5.91
)

34

65.5

28

Metal
enclosure

**

86

**

–

** Make the drilled holes/cutout in the center of
the enclosure reinforcement plate.

34
18

182.5

15.5

15.5

70
82
134

79

295 mm
(11.61
) to 438 174.5
mm (17.24"
)

81

129

182.5

120

32

129

C

18

155 mm (6.10
)
to 185 mm
(7.28
)

B

79

A

120

VIP 6000

Installation
depth:

34

* Ø 6 mm (0.24
) only with metal
enclosures for attaching the
reinforcement plate.

Ø 5.5/10 deep

40

Outer edge of enclosure at the rear

160

146

Alternative
ØW

CP-L

180

Accessories

tighten the screws, and voila!

100
112
180

180

Systems for the human/machine interface

219

Accessories
Cable management
Connector gland

Technical specifications:
● For mounting on any sufficiently large
surface, such as front panels.
● To fit 2 cables up to 8 mm (0.31
)
diameter or 3 cables up to 6 mm (0.24
)
diameter.
● For material thicknesses of up to 4 mm
(0.16
), e.g. in front panels, sheet steel
panels.
● Strain relief of the pre-assembled cables
can be achieved with cable ties.

Color
RAL
9005
9005

To fit

For simple insertion of cables preassembled with connectors. Simply insert
cables, and screw fasten! The high
protection category of IP 65 is retained.

2 cables
3 cables

PU
1
5

Part No.
SZ
2400.300
2400.500

Rittal Service:
The cutouts may be made by our service
centers.

Material:
Plastic
Configuration:
Installation hardware

SZ 2400.300

SZ 2400.500
36

55

55

11
8

6

35

21.5

Ø

35

Ø

3
25

41.5

41.5

4

4

22

Mounting cutout

42

Cable ties
for quick assembly
The super-fast solution for fastening cables
to the enclosure profile or mounting system
parts. Simply clip into the round system
holes.

Length
mm
(inches)
150 (5.91)

PU

Part No. SZ

100

2597.000

Note:
Metal cable ties,
see Handbook 30, page 893.

220

Systems for the human/machine interface

Accessories
Cable management
Cable tie fastener

Attachment
For
width
mm
(inches)
4.8
VIP 6000
(0.19)
4.0
Optipanel
(0.16)

For secure cable routing of all standard
commercially available cable ties. The
fastener is used with:
VIP 6000
● Secured in the screw channel by
hammering down the split rivet.
Optipanel
● Secured in the T channel by rotating
through 45°.

PU

Part No.
CP

100

6059.000

100

6059.500

Material:
Polyamide 6.6

Cable clamping bracket
For installing in the operating housing with
mounting cutout CP-L, round CP-L, square
and CP-XL.
Cable clamping optionally via:
● Cable clamps
(see page 223)
or
● Cable ties for quick assembly
SZ 2597.000 (see page opposite).
● Commercially available cable ties.

Part No. CP
Cable clamping
bracket

6052.000

Note:
Mounting cutout CP-L, round,
see page 80.

Bracket height = 25 mm (0.98
) with fitted
C rail 40 mm (1.57
).
Material:
Sheet steel, zinc plated.

Cable entry module CP-L,
round
Use of the support arm cutout CP-L, round,
only with enclosures mounted on the wall,
for sealed cable entry. May also be
mounted retrospectively with the cables
already inserted.
Fitted with T-heads for cable clamping.
Particularly well-suited to cables with
identical cross-sections.

Weight
kg (lbs)
0.3 (0.66)

Accessories

Configuration:
1 C rail and 2 self-tapping screws
M5 x 10 mm (0.39
).

Part No.
CP
6052.500

PU
1 set

Note:
Mounting cutout CP-L, round,
see page 80.

Material:
Sheet steel, zinc plated.
Configuration:
Installation hardware

10 – 39
100

Ø 82

35

100 – 134

120

25
38.5
70

66

Systems for the human/machine interface

221

Accessories
Cable management
Cover plate
For secure sealing of a support arm
connection in the enclosure which is not
required.
Material:
Sheet steel
Configuration:
Seal and installation hardware.
Note:
If with
● VIP 6000
● Optipanel
● Compact Panel
Command Panels there are already
2 support arm cutouts provided, a cover
plate is included in the configuration of the
enclosure.

Support
arm connection

Color
RAL

CP-S

painted
7024

CP-L,
Zinc plated
round
CP-L,
rectangu- Zinc plated
lar

Adaptor plate

PU
1

for connector entry
For mounting on the worktop, prepared for
turntable or enclosure attachment.
Material:
Sheet steel, zinc plated.
Configuration:
Seal and installation hardware.

Cable gland IW
for worktops
To fit drilled holes 60 mm (2.36
). For the
entry of cables with pre-assembled
connectors, the sliding flap and cover are
easily removed.

Weight Part No.
kg (lbs)
CP
0.1
(0.22)

0.2
(0.44)

0.1
(0.22)

6505.200
6505.500
6505.100

Part No. IW
6902.660

Additional parts
Connector gland
SZ 2400.300 or SZ 2400.500,
see page 220.

Color
RAL
7035

PU

Part No. IW

1

6902.770

25

22

Material:
Plastic

Ø 54
Ø 60

71.5

222

Systems for the human/machine interface

Accessories
Cable management
Cable clamp rails
(right angle section)
For strain relief with cable entry. Depthvariable mounting on a 25 mm (0.98
)
increments on the horizontal enclosure
section or in side base/plinth trim panels
with assembly bolts, see page 210.
Material:
Sheet steel, zinc plated.
Configuration:
Installation hardware

For ES-PC/IW
AP universal console / base/plinth
Enclosure Length
width mm
mm
(inches) (inches)
400
385
(15.75)
(15.16)
600
585
(23.62)
(23.03)
800
785
(31.50)
(30.91)
1000
985
(39.37)
(38.78)
1200
1185
(47.24)
(46.65)

PU

Part No.
PS

2

4193.000

2

4191.000

2

4192.000

2

4336.000

2

4196.000

(May also be used for AP base/plinths and
for mounting on the mounting panel with
AP)

For attaching cables to C rails, with plastic
insert.
Material:
Sheet steel, zinc plated.

Cable conduit and
holder
For secure cable routing e.g. from the
enclosure or mounting panel to the door.
Option of attaching the cable conduit
holder tailored to system holes
TS/IW/ES and to 19
 increments with no
drilling required.
Attachment facility for standard
commercially available cable ties is
provided on the cable conduit holder, so
that cables may be attached upon entry to/
exit from the cable conduit.
Material:
Cable conduit: Polythene
Cable conduit holder: Polyamide

For cable
diameter
6–14 mm (0.24
–0.55
)
12–18 mm (0.47
–0.71
)
18–22 mm (0.71
–0.87
)
22–26 mm (0.87
–1.02
)
26–30 mm (1.02
–1.18
)
30–34 mm (1.18
–1.34
)
34–38 mm (1.34
–1.50
)
38–42 mm (1.50
–1.62
)
56–64 mm (2.20
–2.52
)

PU
25
25
25
25
25
25
25
25
25

Part No.
DK
7077.000
7078.000
7097.000
7097.220
7097.260
7097.300
7097.340
7098.000
7099.000

Cable conduit
Ø mm
(inches)
16 (0.63)
29 (1.14)
36 (1.42)
48 (1.89)

PU

Part No. SZ

25 m (98.43
)
25 m (98.43
)
25 m (98.43
)
25 m (98.43
)

2595.000
2589.000
2596.000
2590.000

Cable conduit holder
For cable conduit
Ø mm (inches)
16 (0.63)
29 (1.14)
36 (1.42)
48 (1.89)

PU

Part No. SZ

20
20
20
20

2593.000
2591.000
2594.000
2592.000

Cable conduit holder:
US patent no. 4,779,828
German patent no. 37 60 110
European patent no. 0 257 367
with validity for DE, ES, FR, GB, IT

Systems for the human/machine interface

223

Accessories

Cable clamps

Accessories
IW monitor housing
Support plate
for screen
Rotatable in conjunction with turntable
IW 6902.620.
Material:
Chipboard, plastic-laminated on both
sides, similar to RAL 7035, with tough
plastic edging, similar to RAL 7015.
Note:
● Other sizes
● With drilled holes
available upon request.

WxD
Height
mm (inches) mm (inches)
400 x 400
25 (0.98)
(15.75 x 15.75)

Part No.
IW
6902.650

Accessories:
Turntable,
see right-hand page.
6

8

27

400

Ø

25

400

Spacer plate
for monitor housing
Creates distance between the enclosure
and worktop to prevent damage to the
mouse and keyboard.
Material:
Chipboard, plastic-laminated on both
sides, similar to RAL 7035, with tough
plastic edging, similar to RAL 7015.
Note:
If a wider gap is required, 2 spacer plates
may also be screw-fastened on top of one
another.

WxD
Height
mm (inches) mm (inches)
400 x 400
25 (0.98)
(15.75 x 15.75)

Part No.
IW
6902.630

Accessories:
Turntable,
see right-hand page.
400

6

400

278

350

● Other sizes
● Other drilled holes
available upon request.

60

224

25

Systems for the human/machine interface

Accessories
IW monitor housing

for spacer plate IW 6902.630 and support
plate IW 6902.650.
Diameter: 328 mm (12.91
)
Height: 14 mm (0.55
)
Load capacity: 300 kg (661.38 lbs)

Color
Black, powdercoated

PU

Part No. IW

1

6902.620

Rotation range:
350°, may be limited by 3 end stops.

M6
Ø 6.5
Ø

Ø

3

2.5

Material:
Cast aluminum

15

27

6

Configuration:
Turntable including installation hardware.

14

Turntable

Ø 11.4
For flat-headed screw M6

262
328

Rotational stop

PU
1

Part No. IW
6902.680

Accessories

Compression spring for automatic latching
of turntable IW 6902.620.

Released via the knob handle mounted on
the side of the monitor housing.

Feet
for monitor housing
Thread length 29 mm (1.14
).

Thread
M8

P. of
4

Part No. IW
6902.610

Max. static load per foot:
300 kg (661.38 lbs)

Systems for the human/machine interface

225

Accessories
Wall/enclosure connectors
Enclosure connectors
adjustable
For attaching compact operating housings,
terminal boxes, compact enclosures etc. to
vertical or horizontal surfaces or to other
enclosures.
The two halves of the connector are premounted on both enclosures or surfaces,
pushed into one another, and attached or
secured using the locking screw.

The locking screws in both connectors may
be exchanged for standard commercially
available clamping levers (M10 x 50 mm).
Rotation range:
±105° with 7.5° stepped increments.
Material:
Die-cast zinc, powder-coated
Configuration:
Installation hardware for both sides.
Additional parts
Cross-brace for door,
see page 227.

Frame connector
adjustable
For screw-fastening from the rotation point
between Command Panel VIP 6000 with
wide front frame to vertical or horizontal
surfaces or other enclosures.
The two halves of the connector are premounted on both enclosures or surfaces,
pushed into one another, and attached or
secured using the locking screw.

Enclosure connectors
Color
Weight
PU
RAL
kg (lbs)
7035
1.9 (4.19) 1 set

Part No.
CP
6016.200

Frame connector
Color
Weight
RAL
kg (lbs)
7035
2 (4.41)

Part No.
CP
6016.100

Enclosure duct connector
To fit narrow and combined frames in conjunction with the keyboard housing 105 mm
(4.13
) deep.
● The angle between the operating and
keyboard housing is 120°.
● At the same time, the duct connector is
used for cable routing from the operating
housing to the keyboard housing.
Material:
Aluminum
Configuration:
Installation hardware

54

54

54

54

5°

10

5°

10

5°

10

1 set

Frame connector

10

5°

Enclosure connectors

PU

Color
RAL
7035

Weight
kg (lbs)
2.0 (4.41)

PU
1 set

Part No.
CP
6006.000

Technical details, see page 39.
Note:
When retro-fitting, appropriate mounting
holes and cutouts must be made in the
operating and keyboard housings for
assembly purposes.
Additional parts
Cross-brace for door,
see page 227.

226

Systems for the human/machine interface

Accessories
Wall/enclosure connectors
Wall mounting bracket
vertically hinged
For direct mounting of the Compact Panel
on surfaces. Optional horizontal or vertical
mounting of enclosures.

PU
1 set

Part No. CP
6341.000

Rotation range:
180° adjustable in 7.2° increments.
Material:
Wall mounting bracket: Sheet steel
Knurled screw: Steel with plastic knurled
handle
Configuration:
Knurled screw and installation hardware for
mounting on the Compact Panel.

Cross-brace for door
To stabilize heavy equipment installed on
and in the door.
With punchings for enclosure duct
connector, enclosure/frame connector,
adjustable,
see page 226 and
enclosure surface connector,
see page 228.

For
door width
600 mm
(23.62")
800 mm
(31.50")

Weight
kg (lbs)

Part No.
TS

1.0 (2.20)

8800.960

1.5 (3.31)

8800.980

Material:
Sheet steel, zinc plated, passivated.
Configuration:
Installation hardware for screw-fastening to
the tubular door frame (TS/ES).

Cable tube, flexible
Suitable for cable routing from the
operating housing to the keyboard housing.
Suitable for use with
● Frame connector, adjustable
● Hinged frame connector
● Frame connector, rigid
● Enclosure bar connector
May be mounted on the following keyboard
housings:
● Keyboard housing: 105 mm (4.13
)
● Keyboard housing: 44 mm (1.73
)
● Keyboard housing: 27 mm (1.06
)
with connection for flexible cable conduit
(version 4.1, see page 28).

Accessories

Application example:
Keyboard housing with duct connector
mounted on the rear panel.

Keyboard
housing
VIP 6000
(page 23)
CP 6351.009,
version 3.1,
2 , 4
3 , 7

Color Weight Part No.
RAL kg (lbs)
CP

7035

0.3
(0.66)

6017.000

7035

0.3
(0.66)

6017.100

Corresponding cutouts are required for
connecting the cable tube in the operating
and keyboard housing.
A cable tube is included in the
configuration to selection 4.5, see page 31.
Configuration:
Installation hardware

Systems for the human/machine interface

227

Accessories
Wall/enclosure connectors
Enclosure surface connector
with smooth outer surface, uninterrupted by
screw attachments. Mounting see spring
nuts from the inside.
To accommodate:
● Support for keyboards (SM 2383.000)
● Optipanel keyboard housing for front
panel width = 19

(Part No. CP 6384.009)
H x W = H x 482.6 mm (19
)*
Installation depth optionally 50 or
100 mm*.
* Specify in addition to the Part No.
Material:
Extruded aluminum section, natural
anodized,
Side cover, sheet steel RAL 7024.
Configuration:
Installation hardware

PU
1 set

Part No. SM
2383.010

Note:
Other widths available on request.
Accessories:
Cross-brace for door, see page 227
(required for reinforcement on surfaces).

Mounting on
surfaces

Mounting underneath
surfaces 79
56
8
40

10°

73.5

°

90

30°

30°

67
45°

45
°

Connector for compact
enclosures
Between
● Compact enclosure AE
from depth 210 mm (8.27
)
(see HB 30, page 66)
● Operating housings from depth 210 mm
(8.27
)
(see page 68/69)
and
● Terminal boxes KL
from depth 80 mm (3.15
)
(see HB 30, page 48)
● E-Box EB
from depth 80 mm (3.15
)
(see HB 30, page 56)

83

15

6°

Color
RAL
7024

Weight
kg (lbs)
0.74 (1.63)

Part No.
CP
6005.100

Configuration:
Installation hardware.
Note:
Installation holes will be required for
retrofitting.

Material:
Sheet steel
Modifications available on request.
Terminal box, E-Box and compact
enclosure available on request with front
panel and handle strips mounted on the
rear panel.
Drilling pattern for attaching the
connector to both enclosures
B

(210)
190 min.

135
30

A

2.5

e. g. AE
A

0°

23

.5

10

15

(B – 2 x A)

12

23.5

M6

30

e. g. KL/EB

e. g. KL/EB

(80

)

50
mi
n
55 .

e. g. AE

Handle strips
Without
With

228

min. dimension A
mm (inches)
15 (0.59)
35 (1.38)

Systems for the human/machine interface

Accessories
Wall/enclosure connectors
Utility shelf CP
screw fastened
With support mat for:
Measuring tools, writing equipment,
mouse, scanner, small parts etc.
For mounting
● Underneath*:
− VIP 6000
− Optipanel
− Command Panel housing with door
− Operating housing
− IW worktop
● On surfaces (doors, rear panels) using
rear assembly holes
● to TS system chassis with mounting
flange 17 x 73 mm (0.67
 x 2.87
),
locatable, without screw fastening,
− For servicing work on the enclosure.
* For visual reasons, not drilled for
assembly.

Width
mm (inches)
220 (8.66)
450 (17.72)

Color
RAL

Part No.
CP
6514.110
6514.100

7035

Note:
When mounting beneath slimline operating
housings with support arm connection at
the bottom, please observe the enclosure
attachment or coupling.

Material:
Sheet steel
Configuration:
Installation hardware

150

35

52.5

21.5

185
20

M6

150/375

B

1

Wall mounting bracket
For fast, secure wall mounting using the
rear holes in the enclosure.
40 mm (1.57
) distance from the wall
permits cable routing behind the enclosure
to the gland panel.
Note:
With stainless steel enclosures, additional
holes are required in the rear of the
enclosure for reasons of hygiene.

Wall
distance
Material
Dimension
A
Brass,
40 mm
nickel-plated (1.57
)
Sheet steel, 10 mm
zinc plated
(0.39
)
Type 304
stainless
10 mm
steel
(0.39
)
(V2A)

PU

Part No.
SZ

1

2503.000

1

2508.000

4

2433.000

29
54

Ø 10.2

20

15

15

A

20

Systems for the human/machine interface

229

Accessories

1 = Additional central thread only for CP 6514.100

Accessories
Wall/enclosure connectors
Pole clamp
For reliable, convenient fastening to round
or square poles.
For pole diameter/size:
Ø from 40 to 190 mm (1.57
 to 7.48
)
□ from 50 to 150 mm (1.97
 to 5.91
)
Material:
Cross rails, clamping section:
Sheet steel, zinc-plated, passivated
Clamping strap: Type 304 stainless steel
(V2A)

Wall bracket
For wall attachment of PC enclosures e.g.
with heavy pull-out equipment on the roof
side.

Part No. SZ
2584.000

Pole clamp

German patent no. 36 10 152
Configuration:
2 cross rails, 600 mm (23.62
) long
4 clamping sections,
2 clamping straps
4 clamping brackets,
4 screws and nuts M8
for mounting on the enclosure.

PU
4

Part No. PS
4595.000

Material:
Sheet steel, zinc plated.

Aluminum strip for AP
Prevents wiring plans etc. from slipping.

For console
AP 2611.200
AP 2613.200
AP 2668.600
AP 2641.200
AP 2643.200
AP 2672.600
AP 2666.600

230

Length
mm
(inches)

PU

Part No.
AP

783
(30.83)

3

2678.000

1183
(46.57)

3

2682.000

583
(22.95)

3

2676.000

Systems for the human/machine interface

Accessories
front design
Keyboard drawer
For a maximum keyboard width of 500 mm
(19.69
).
Drawer with mousepad at the front.
A high level of protection is retained, even
with the flap open.
Configuration:
Installation hardware for mounting on the
universal console*.
* Only suitable for installation in the
universal console without mounting panel.

Material
Sheet steel
Type 304
stainless
steel2)

Finish
RAL 70321)

Part No.
MC 4757.000

Brushed

AP 2691.000

1) To

order in textured RAL 7035, please use
the Part No. extension .500 when ordering.
Delivery times available on request.
2) To order keyboard drawer in 1.4404
(Type 316L) please add extension .500 to the
Part No.
Delivery times available on request.

Protection ratings:
IP 55 to EN 60 529/10.91,
Complies with UL and NEMA Type 12.

Accessories:
Plastic handle, version B and lock insert,
version A, see page 245/246.
477

113
70

170

195

600

467

358

508

36

Desk section

Configuration:
Installation hardware for mounting on the
universal console.
592

Material
Sheet steel

Finish
RAL 7032*/
5018

Part No. AP
2696.200

* To order in textured RAL 7035, please use
the Part No. extension .500 when ordering.
Delivery times available on request.

Protection ratings:
IP 55 to EN 60 529/10.91,
Complies with UL and NEMA Type 12.

Accessories

Solid sides and front, removable plates for
top and bottom. May optionally be
attached with the inclined or straight edge
on top, by rotating through 180°.

20

i. L. 432

i. L. 27

78.5°
58

122

195

4.5

i. L. 271.5
36.5

i. L. 532

Solid sides and front, removable plates for
top and bottom. May optionally be
attached with the inclined or straight edge
on top, by rotating through 180°.
Configuration:
Installation hardware for mounting on the
universal console AP 2688.600.
i.L. = Clearance width

592

360

Material
Type 304
stainless
steel*

Finish

Part No. AP

Brushed

2690.000

* To order desk section in 1.4404 (Type 316L)
please add extension .500 to the Part No.
Delivery times available on request.

Protection ratings:
IP 55 to EN 60 529/10.91,
Complies with UL and NEMA Type 12.

i. L. 432

20
i. L. 27

78.5°
58

195

122

4.5

Systems for the human/machine interface

36.5

i. L. 271.5
i. L. 532

350

231

Accessories
Front design
Aluminum front panels

Height

For assembling operator panels.
Material:
3 mm (0.12
) aluminum, natural anodized.
Note:
When using several front panels in the
operating housing
● VIP 6000
● Optipanel
cross members should be provided for
sub-division, see page 234.
Rittal Service:
Other sizes and designs with studs,
cutouts and engraving available on
request.

Part No.
CP

Width

155.0 mm
19

6027.000
(3.5 U)
177.0 mm
19

6019.000
(4 U)
310.3 mm
19

6028.000
(7 U)
493.8 mm*
19

6029.000
(7 + 3.5 U)
* The front panel height corresponds to
CP 6027.000 plus CP 6028.000 and
one cross member (+ 28 mm (1.10
)) for
VIP 6000.

Additional parts

D

–

–

–

–

t=3

5.5

8.8

168.2
(6.62)
146.2
(5.76)
301.5
(11.87)
485.0
(19.09)

C

C

177.0
(6.97)
155.0
6027.000
(6.1)
310.3
6028.000
(12.22)
493.8
6029.000
(19.44)
6019.000

B

D

A

B

Part No.
CP

A

Mounting kit CP 6053.000,
see page 233.

155.2
–
(6.11)
326.2 167.5
(12.84) (6.59)

8.8
163.8
318.8
473.8
482.6

Front panels

Mounting cutout

for Optipanel
270 x 234 mm (10.63
 x 9.22
) with
threaded bolt M5 for Optipanel
CP 6380.100.

Without
For Siemens
Simatic OP 17
For Siemens
Simatic TP 170 A/B
Acc. to
specifications

Material:
3 mm aluminum, natural anodized.
Configuration:
Mounting kit

1

Part No.
CP
6027.500

1

6027.510

1

6027.520

1

6027.509

PU

6027.500

60

B

D

C

11

195.0 19.5
19.5
(7.68) (0.77) (0.77)
141.5 36.25 46.25
(5.57) (1.43) (1.82)

D

C

270

3

12

6027.520

231.0
(9.09)
197.5
(7.78)

B

11

6027.510

A

A

234

Part No.
CP

M5

232

Systems for the human/machine interface

Accessories
Front design
Front panels, hinged
For VIP 6000 and Optipanel
Opening angle:
Optipanel: 125°
VIP 6000: 95°
Material:
Front panel: 3 mm aluminum, natural
anodized
Extruded aluminum section: Natural anodised
Configuration:
Hinge section, hinge strip, 2 end trims and
installation hardware.
Front panel for
Optipanel

19
 x 7 U

VIP 6000

19
 x 7 U

Version
Part No. CP
Screw-fastened from the outside
6027.100
Screw-fastened from the inside
6027.1101)
With cam
6027.1201)
Screw-fastened from the outside 6027.2002)
Screw-fastened from the inside 6027.2101) 2)
With cam
6027.2201) 2)

1) Extended delivery times.
For other sizes, please add the extension .009 to the Part No.
2) When ordering, please specify the color of the required end trim (see page 25)
B
Mounting position
Mounting position
5
Optipanel
VIP 6000
33

33
B – 28

1

B – 28

D

H

3

3

6

1

H – 33

Required distance from edge “D”
to avoid collisions
Installation depth:
Dimension “D”
Optipanel 50 mm (1.97
) 25 mm (0.98
)
Optipanel 100 mm (3.94
) 34 mm (1.34
)
Optipanel 150 mm (5.91
) 48 mm (1.89
)
VIP 6000 44 mm (1.73
)
25 mm (0.98
)
VIP 6000 105 mm (4.13
) 36 mm (1.42
)
VIP 6000 155 mm (6.10
) 52 mm (2.04
)

HxB

2

2

3

3

1 = hinge strip
2 = hinge section
3 = retaining claw

Mounting kit
For installing
● Aluminum front panels
● Command panels
● Keyboards
in the Command Panel
● VIP 6000
● Optipanel
operating and keyboard housing.

For holes

For bolts

For holes
For front panels
Other
Rittal
and others

Thread
M4

Part No. CP
6058.000

M5

6053.000

Configuration:
Packs of 30 retaining clamps, captive nuts,
screws and sealing washers.
For bolts
Thread
M4
M5

Part No. CP
6058.500
6053.500

Configuration:
Packs of 10 retaining clamps and cap
screws.

For screw clamp

For screw clamp
For enclosure
VIP 6000 and
Optipanel

Part No. CP
6053.200

Configuration:
Pack of 2 mounting straps, 4 retaining
clamps and screws.

Systems for the human/machine interface

233

Accessories

B = Width

Accessories
Front design
For VIP 6000 and Optipanel

Sealing bar
For horizontal and/or vertical division of
operating housings. The “slot-free” division
produces a height gain of 28 mm (1.10
)
(VIP 6000) or 22 mm (0.87
) (Optipanel)
respectively.

1)

Material:
Aluminum section 8 x 20 mm (0.79
)

For front panel width
Part No. CP
19

6015.500
As specified1)
6015.509
Please specify width of front panel.

Technical details,
see page 34 or 55.

Configuration:
Installation hardware
Note:
Sealing bar may not be used in conjunction
with spacer trim.

Cross member

For
Part No. CP Part No. CP
front panel
For
For
width
VIP 6000
Optipanel
6386.000
19

6015.0002)
To
specifica6015.0092)
6386.009
tions1)
1) Please specify width/height of front panel.
2) Trim type and trim color, see page 25.
Please state on the order.

For horizontal and/or vertical division of the
Command Panel front. With mounting
channel on both sides to accommodate
mounting kits, see page 233.
Configuration:
2 retaining claws,
2 screws with washers,
2 trim sections2).
Material:
Extruded aluminum section

Technical details,
see page 34.

Spacer panel and built-in trim
panel

For VIP 6000
For front panel width
Part No. CP
19

6015.300
As specified1)
6015.309
Height corresponding to a front panel
height of 103 mm (4.06
).
1) Please specify width of front panel.
Trim color see page 25.
Please state on the order.

For additional space with cable entry and
for installing
● Switches/indicator lamps
● Emergency-off switches/keyswitches
● CD-ROM / disk drives
● Interfaces
etc.
For mounting (horizontally or vertically) on
the enclosure, snap into position and
screw-fasten from behind.
Other spacer panels and built-in trim
panels, front panels and operator panels
may be installed without an additional
cross member.
Material:
Extruded aluminum section, natural
anodized.

For Optipanel
For front panel width
Part No. CP
19

6386.300
As specified
6386.309
Height corresponding to a front panel
height of 96 mm (3.78
).

Configuration:
Installation hardware and end trim
(VIP 6000), spacer trim (Optipanel).

VIP 6000

Optipanel
103

96

97

90
57

3.5
65

67.5
4.8

10.5

4.5
10

4.5
3.5

3.5

9.8

10

3

59.5

15

3.5

482.6

4.5

482.6

80

72.5

79.5

12.2
12.2

➀

➀


 Other spacer panels and built-in trim panels, front panel or operator panel

234

Systems for the human/machine interface

Accessories
Handles
Handle set
For vertical and horizontal mounting on all
surfaces.
Overall length: 420 mm (16.54
).
Material:
Handle tube: Aluminum, natural anodized.
Conduit holder: Die-cast zinc, RAL 7035

Conduit holder
2

1
3

4

For mounting on surfaces, horizontal or
vertical, also suitable for height-adjustable
and/or swivel mounting of enclosures.
For 25 mm (0.98
) dia. sections made from
● Steel, seamless DIN 2448
● Aluminum to DIN 1795
as a handle or for limiting support surfaces.

PU
4 conduit holders,
2 handle tubes

Part No. SZ
2389.000

Accessories:
Clipboard,
Ring board,
see page 239.

Color
RAL
7035

PU

Part No. SZ

2

2389.100

Consisting of:

 Assembly tray with one drilled hole and
M8 screw and two pins as anti-twist guard.

Accessories

 Clamping tray with tolerance
compensation and screw for tightening the
conduits.
 Washer, small, prevents tensioning of
the conduits e.g. should it become
necessary to remove the fitted ring board.
 Washer, large, secures the
unconstrained, rotating conduit between
the two trays to prevent it from falling out.
Material:
Die-cast zinc

Systems for the human/machine interface

235

Accessories
Handles
Handle set VIP 6000
for wide frame
For mounting on the corner connectors of
the enclosure frame.

For horizontal mounting
on
● Operating housing
● Keyboard housing
With
front panel width
19

As specified

Material:
Handle tube: Extruded aluminum section,
natural anodized
Handle holder: Die-cast zinc,
powder coated in RAL 7035

PU
1 set
1 set

Part No.
CP
6101.000
6101.0092)

Configuration:
Packs of 2 handle holders, 1 handle tube,
2 screws.
For vertical, side mounting
on
● Operating housing
● Keyboard housing
With
front panel height
7U
7 + 3.5 U1)
As specified
1)

PU
1 set
1 set
1 set

Part No.
CP
6102.000
6103.000
6102.0092)

Divided by cross member for VIP 6000

2)

Please additionally state when ordering:
● Number and dimensions of front panels
● Number of cross members/sealing bars
or
● Part Number of your enclosure.
Configuration:
Packs of 4 handle holders, 2 handle tubes,
4 screws.
Accessories:
Clipboard,
Ring board,
see page 239.
Note:
Shorter heights and widths can be
achieved by cutting the handle tube to
length.

236

Systems for the human/machine interface

Accessories
Handles
For horizontal mounting

Handle set for Optipanel
For external mounting on corner pieces,
also suitable for retro-fitting.
Material

Color
RAL

Handle tube,
Natural
Ø 25 mm
ano(0.98
),
dized
aluminum
Handle
holder,
die-cast zinc, 7035
powdercoated
Cover
7024
polyamide
* Including screws

With
front panel width
482.6 mm (19
)
As specified

Configuration*
horizontal vertical
1

2

2

4

2

4

PU
1 set
1 set

Part No.
CP
6385.010
6385.0192)

For vertical mounting
With
front panel height
7U
7 U + 2 x 3.5 U1)
As specified

PU
1 set
1 set
1 set

Part No.
CP
6385.020
6385.030
6385.0292)

1)

Divided by 2 cross members
for Optipanel

2)

Please additionally state when ordering:
– Number/dimensions of front panel
– Number of cross members/sealing bars
– Part Number of enclosure.

Note:
Shorter heights and widths can be
achieved by cutting the handle tube to
length.
For enclosures with 100 mm (3.94
) depth,
cannot be mounted on the same side as
the
● Support arm connection
● Interface door
(SZ 2482.200, see page 240)
Accessories:

Accessories

Clipboard,
Ring board,
see page 239.

49

25

Ø 25

64

Systems for the human/machine interface

237

Accessories
Handles
For horizontal or vertical attachment to the
enclosure panel of:
● VIP 6000 with combined or
narrow front frame,
● Optipanel or
● Other enclosures.
Mounting holes and surfaces without fins
are required for assembly purposes. For
the VIP 6000 version with fins, corresponding milling work may be carried out.
With the operating/keyboard housing,
please specify “Prepared for handle set
CP 6107.XXX”.

Color
RAL

Material
Handle holder,
die-cast zinc
Cover plugs,
plastic
Handle tube,
aluminum,
powder coated

Note:
Also suitable for mounting on all surfaces.

7035
similar to
7035
similar to
9006

Corner handle

PU
1 set

Configuration:
4 handle holders, 2 handle tubes,
installation hardware.

Mounting on enclosure corner

Part No. CP
6107.000

Mounting on straight surfaces
(90° rotation of handle holder)

153

163

131.5

Ø 6.5

45°

45

°

92

(85)

131.5

217

Ø 6.5

25

132
163

25

U handle

For front panel
dimensions
≥7U
19


Configuration:
2 handle holders, 1 handle tube,
installation hardware.

PU
1 set
1 set

Part No.
CP
6107.100
6107.200

Accessories:
For CP 6107.200:
Clipboard,
Ring board,
see page 239.

(75)

°

45

92

Ø 25

CP 6107.100
Mounting on straight surfaces
(for front panel size 7 U)

230

25

293
Ø 6.5

45°

92

Ø 25

CP 6107.200
Mounting on straight surfaces
(for front panel size 19
)

(240)
395

25

458
Ø 6.5

238

Systems for the human/machine interface

Accessories
Handles
Clipboard
For securing operating instructions or plans
(A4 size) at eye level. Prepared for
mounting on the right-hand side; mounting
on the left is also possible by unscrewing
and moving the clip part.
For mounting purposes, a straight tube
length of ≥ 200 mm (4.72
), 25 mm (0.98
)
dia. is required.
Suitable for mounting on the U handle,
see page 238.
Material:
Sheet steel
Clip part: Aluminum, natural anodized.

Ring board
The alternative for attaching paper or
plastic covers in A4 format, in either
landscape or portrait format.
Board folded over on three sides and
punched for mounting the installation
hardware on the handle tube (length
≥ 200 mm (4.72
), Ø 25 mm (0.98
)).
Suitable for mounting on all four sides of
the panel with handle set.
Suitable for mounting on the U handle,
see page 238.

Height

Width

Color
RAL

Part No.
CP

315 mm
(12.40
)

225 mm
(8.56
)

7035

6013.000

Additional parts
Handle set,
see page 236/237.
Clipboard in conjunction with Command
Panel VIP 6000:
German utility model no. 295 11 459
European patent no. 0 839 093 with
validity for DE, FR, GB, IT

Size
mm (inches)
225 (8.86
) x
315 (12.4
)

Color
RAL

Part No. CP

7035

6013.500

Additional parts
Handle set,
see page 236/237.

Material:
Sheet steel
Ring strip, 16 mm (0.63
): Sheet steel,
plated

Consisting of:
● Square aluminum tube
● Plastic corner bracket
● End caps
● Installation hardware

Dimensions of handle set in mm (inches)
B1 = Width of operating housing
B2 = Width of horizontal square pipe
(B1 + 48 (1.89))
H1 = Height of vertical square pipe
H2 = Hole distance between the attachment
holes

For
operating
housing with
display panel
front
CP 6442.200
CP 6462.200
CP 6552.200
CP 6662.200

Part No. CP
RAL 8019

RAL 7030

6191.000

6194.000

6192.000
6190.000

6195.000
6193.000

CP 6191.000 CP 6192.000 CP 6190.000
CP 6194.000 CP 6195.000 CP 6193.000
380 (14.96) 500 (19.69) 600 (23.62)
428 (16.85)

548 (21.57)

648 (25.51)

345 (13.58)

465 (18.31)

299 (11.77)

295 (11.61)

415 (16.34)

249 ( 9.80)

B = Width
30

B2

25

H2

H1

19

B1

Systems for the human/machine interface

239

Accessories

Handle frame
for operating housing

Accessories
Interface door
Interface door
The compact alternative to the interface
box.
For secure accommodation of all standard
sockets, computer ports, 3 1/2
 or CD-ROM
drives.
The cast aluminum door ensures a high
mechanical load-bearing capacity, and
guards against unauthorized access.
For:
● Optipanel from D = 100 mm (3.94
)
● Any sufficiently large surface.
● Use of all TS lock inserts
(see HB 30, page 937).

Color
RAL
7035

Weight
kg (lbs)
0.6 (1.32)

Part No.
SZ
2482.200

Configuration:
Seal and installation hardware double-bit
lock.
Protection ratings:
IP 65 to EN 60 529/10.91
Rittal Service:
Cutouts are possible in the cover plate and
enclosure.
Available without cover plate on request.

Standard double-bit lock insert may be
exchanged for lock inserts
(see HB 30, page 937).

Note:
For side mounting in 100 mm (3.94
) deep
Optipanels, a handle set (CP 6385.0XX,
see page 237) may be mounted, although
not in the same place.

Material:
Door: Cast aluminum, finely textured
Cover plate: Sheet steel 2 mm (14 ga)
zinc-plated

View without door

View with door
22.5

81

218

189

11

66

max.
54

max. 146

66

66

6

70

15

Surface for interface cutouts

Interface box
For secure accommodation for all common
computer ports, 3 1/2
 disk drives and
sockets. The lockable metal cover provides
a high mechanical load-bearing capacity,
protects against unauthorized access and
ensures an increased shielding effect for
the installed equipment.
Modifications such as
● Other sizes
● Acrylic covers
● Cutouts for connectors etc.
are possible.

22

Material:
Frame: Extruded aluminum section,
powder coated
Mounting tray: Sheet steel, 1.5 mm (16 ga),
painted
Door: Aluminum, 3.0 mm (11 ga), natural
anodized

Color
RAL

Without

7035

With

7035

Weight Part No.
kg (lbs)
SZ
0.8
2482.000
(1.76)
0.8
2482.100
(1.76)

Configuration:
Frame with hinged door, Cam with security
lock (No. 12321).
Mounting tray including seal and
installation hardware.
Rittal Service:
Upon request, the interface box can be
supplied pre-installed in the operating
housing. If required, please specify the
desired installation position.
Mounting cutout

15

18.5

18

85

26

for
SZ 2482.100

9.5

Mounting example in the VIP 6000:

Groundingpin socket

105

max. R3

240

167

151.5
13.5

95
138

M2.5/Ø 3

42

46

50

41

173

132

for
SZ 2482.100

82.4

54

Systems for the human/machine interface

Accessories
Window
Viewing window
The perfect solution for display and control
elements in all areas where stringent
hygiene standards are required.
Fitted as standard with internal 130° hinges
and all-round seal. The double-bit lock
insert may be exchanged for 27 mm (1.06
)
lock inserts, version A and Ergoform-S
handle SZ 2452.000.
Material:
Type 304 stainless steel
Single-pane safety glass
Protection ratings:
IP 54 to EN 60 529/10.91
Configuration:
With cam lock, including installation
hardware.

Height Width Depth
B1
Part No.
mm
mm
mm
mm
FT
(inches) (inches) (inches) (inches)
600
522
38
408 2793.560
(23.62) (20.55) (1.5) (16.06)
600
722
38
608 2793.760
(23.62) (28.43) (1.5) (23.94)

Rittal Service:
Other widths and heights available on
request.
Accessories:
27 mm (1.06
) lock inserts,
version A,
see page 246.
Ergoform-S handle SZ 2452.000,
see page 245.

37.5

B
B1

525

475
285

543

600

25.5

for PC enclosure stainless steel/AP
universal console
For retrospective conversion of standard
doors with 130° hinges.

Material
Type 304
stainless steel
Aluminum

PU

Part No. PS

6

4156.000

6

4189.000

Configuration:
Installation hardware

Systems for the human/machine interface

241

Accessories

Hinge 180°

31

38

25

Accessories
Window
B
85

B – 137

52

47

77
33

1

H

h–2

b

h

2

30

3

60

B – 52

63

H – 52

4

5

Viewing area (B –137) offset by 16.5 mm
(0.65
) to the hinge side.
6

Mounting options:

1
2
3
4

System window, 60 section

On surface
Via cutout
Via cutout with display panel
Via cutout with spacer frame and
display panel

Installation depth behind
system window in
mm (inches)
33 (1.30)
–
30 (1.18)

6
7
8

To fit TS/ES/IW
with width
(mm (inches))
600 (23.62)

8

60 (2.36)
On surface
Via cutout
Via cutout with display panel
Via cutout with spacer frame and
display panel

5

90

Mounting type
System window, 30 section

60

7

Window size (mm (inches))
external
internal
H
B
h
b
270 (10.63) 500 (19.69) 200 (7.87) 430 (16.93)
370 (14.57)
300 (11.81)
470 (18.50)
400 (15.75)
570 (22.44)
500 (19.69)
670 (26.38)
600 (23.62)
Other sizes**

63 (2.48)
–
60 (2.36)
90 (3.54)

Part No. FT
30 section

Part No. FT
60 section

Part No. FT
Spacer frame

Part No. FT
Display panel

2735.100
2735.110
2735.120
2735.130
2735.140
2735.009*

2736.100
2736.110
2736.120
2736.130
2736.140
2736.009*

2737.100
2737.110
2737.120
2737.130
2737.140
2737.009*

2738.100
2738.110
2738.120
2738.130
2738.140
2738.009*

Lock systems
Standard double-bit lock insert may be exchanged for 27 mm (1,06
) lock inserts, type A, see page 246
and Ergoform-S lock system (except H = 270 mm (10.63
)), see page 245.
** Please also specify the external dimensions of the viewing window. * Delivery times available on request
Example 1: System window (30 profile) to fit door width 500 mm (19.69
)
with Height H = 480 mm (18.90
) x Width W = 400 mm (15.75
) (h x w = 410 mm (16.14
) x 330 mm (12.99
) )
Part No. FT 2735.009/H x W = 480 x 400 mm (18.90
 x 15.75
).
Example 2: Spacer frame for system window in example 1
Part No. FT 2737.009/to fit window H x W = 480 x 400 mm (18.90
 x 15.75
).
Example 3: Display panel for system window from example 1 or spacer frame from example 2
Part No. FT 2738.009/to fit window H x W = 480 x 400 mm (18.90
 x 15.75
).
242

Systems for the human/machine interface

Accessories
Window
System representation

2

3

5

6

4

7

The new generation,
the system window,
consists of the
following
components:
1. Base frame:
● Easily screw-fastened to the
door using modified
dimensions (tubular door
frame may be used as a
drilling template).
● Readily height-adjustable.
● Stabilizes the door cutout.
● Conceals the cut edge.
● The canopy
− prevents dirt from falling on
the seal,
− protects the glass from
being lifted out,
− prevents the intrusion of
dirt and moisture when
opening the window.
2. Viewing window:
● Made from single-pane
safety glass:
− High level of resistance to
solvents and scratches,
− Anti-static,
− Reduced risk of injury if
broken.

8

● Integral cam lock with
double-bit insert, easily
exchanged for all standard
lock inserts and semicylinders in the Ergoform-S
lock system.
● Hinge with 180° opening
angle, easily inserted.
3. Spacer frame:
● As an alternative to the
deeper system window. Why
not make use of the space
inside the door?
4. Display panel:
● For screw-fastening to the
base or spacer frame, with
mounting slots. Preassemble the screws at the
bottom of the frame, locate
the plate, and tighten the
screws.
● Easily machined for:
− Holes and cutouts,
− Labels,
− Engraving,
Pre-wiring on the workbench.

Systems for the human/machine interface

Material:
System windows:
Extruded aluminum sections
with die-cast zinc corner
pieces and single-pane safety
glass.

Accessories

1

Accessories:
Ergoform-S lock system,
Part No. see page 245.

Spacer frame:
Extruded aluminum sections
Display panel:
3 mm (0.12
) aluminum, natural
anodized
Finish:
Base frame and spacer frame:
Powder-coated in RAL 7030
Hinge and lock
section: Anodized in E6 C-32
(bronze colored)
Other colors available on
request.
Protection ratings:
IP 54 to EN 60 529/10.91

System windows: Shown
here mounted on the TS 8
enclosure.

243

Accessories
Lock systems
Comfort handle
for semi-cylinder
Prepared for the installation of
commercially available semi-cylinders,
40 or 45 mm (1.57
 or 1.77
) total length, to
DIN 18 254, and lock and push-button
inserts.
see below.
Length: 302 mm (11.89
)

Color
RAL
7032
7035
8019

Part No. TS
8611.060
8611.070
8611.270

Additional parts
Handle adaptor for mounting on viewing
door/designer door TS-PC/IW, see below.
Note:
Other versions,
see HB 30.

Comfort handle
With security lock insert E1.
Only for use with VW/Audi. Supplied
without key.

Color
RAL
7032

Part No. TS
8611.040

Length: 295 mm (11.61
)
Other VW locks available on request.

Additional parts
Handle adaptor for mounting on a viewing
door/designer door TS-PC/IW, see below.

Handle adaptor for designer
door TS-PC/IW
To compensate for the design chamfer
between the vertical bar and comfort
handle.

Color
RAL
7035

Part No. PC
8611.300

Material:
Plastic

Lock and push-button inserts
For installation in
● Comfort handle for semi-cylinders,
see above,
● Ergoform-S standard, see page 245.

244

Design
Security lock insert
no. 3524 E
Push-button insert
Lock and pushbutton insert,
lock no. 2123; no
other lock is possible.
* with 2 keys

Part No. SZ
2467.000*
2468.000
2469.000*

Systems for the human/machine interface

Accessories
Lock systems
Ergoform standard
Prepared for the installation of semicylinders with a total length of 40/45 mm
(1.57
/1.77
) (to DIN 18 254) and all 27 mm
(1.06
) lock inserts, type A, see page 246.
Material:
Die-cast zinc, powder-coated.

Ergoform special
With lock insert E1
(Volkswagen/Audi).
Only for use with VW/Audi. Supplied
without key.
Other VW locks available on request.

Design
Part No. SZ
RAL 7032
2450.000
With brown handle
Brown
2451.000
Matt nickel-plated
2452.000
RAL 7032
2454.000
RAL 7035
2435.000
RAL 7032*
With brown handle
2455.000
and bracket
* Hole diameter = 7 mm (0.28
) for padlock
or multiple lock.

Design
RAL 7032
With brown handle

Part No. SZ
2456.000

Material:
Die-cast zinc, powder-coated.

with cylinder insert.
Lock no. 3524 E including installation
hardware, seal and 2 keys.

Version B

Version B,
but without cylinder insert.

Version C

Systems for the human/machine interface

Note:
The universal lock systems allows the
installation of a suitable handle to suit
almost any application or customer
specification. The relevant product
ordering page shows which handles can
be fitted into each particular assembly.

Color
RAL
9011
7030

Color
RAL
9011

Color
RAL
9011

Accessories

Plastic handles

Part No. SZ
2576.000
2439.000

Part No. SZ
2533.000

Part No. SZ
2485.000

245

Accessories
Lock systems
T handles
Material:
Die-cast zinc, chrome-plated.
Version B

Version C

Configuration:
Seal and 2 keys.

Version
With cylinder insert
Lock no. 3524 E
Without cylinder insert

Part No. SZ

Version
With cylinder insert
Lock no. 3524 E
Without cylinder insert

Part No. SZ

2575.000
2572.000

2535.000
2536.000

Lock inserts
Note:
The universal lock systems allows the
installation of a suitable handle to suit
almost any application or customer
Version A
Material:
Die-cast zinc

Version C
Material:
Die-cast zinc

Version D
Material:
Die-cast zinc

246

specification. The relevant product
ordering page shows which handles can
be fitted into each particular assembly.
Length 27 mm (1.06
)
7 mm (0.28
) square
8 mm (0.31
) square
7 mm (0.28
) triangular
8 mm (0.31
) triangular
Screwdriver
Daimler insert
3 mm (0.12
) double-bit
Fiat
6.5 mm (0.26
)
triangular (CNOMO)

Part No. SZ
2460.000
2461.000
2462.000
2463.000
2464.000
2465.000
2466.000
2307.000

Length 41 mm (1.61
)
7 mm (0.28
) square
8 mm (0.31
) square
7 mm (0.28
) triangular
8 mm (0.31
) triangular
Daimler insert
3 mm (0.12
) double-bit

Part No. SZ
2523.000
2526.000
2527.000
2528.000
2522.000
2483.000

Length 47 mm (1.85
)
7 mm (0.28
) square
8 mm (0.31
) square
7 mm (0.28
) triangular
8 mm (0.31
) triangular
Daimler insert
3 mm (0.12
) double-bit

Part No. SZ
2557.000
2558.000
2555.000
2556.000
2554.000
2484.000

2460.650

Systems for the human/machine interface

Accessories
Lock systems
Cylinder inserts
Material:
Die-cast zinc

PU
1

Part No. SZ
2571.000

PU
1

Part No. SZ
2525.000

For AE
Powder coated in
textured RAL 7032
Nickel-plated (matt)

Part No. CP

Lock no. 3524 E
with 2 keys.

Version C
Lock no. 3524 E
with 2 keys.

Semi-cylinder lock
For sheet steel Command Panels and
Command Panels with display panel front
or VIP 6000 frame.
For retro-fitting to all single-door enclosures
with cam lock. The cover plate is locked by
semi-cylinders with a total length of 40/
45 mm (1.57
/1.77
) (to DIN 18 254). An
additional cover protects the cylinder
against dirt. The protection category of the
enclosure is not impaired.
Supplied without semi-cylinder.

2534.000

Accessories

Version B

2534.500

US patent no. 5,916,282
German patent no. 195 12 280
European patent no. 0778 913
with validity for GB, FR, IT
Jap. patent no. 3,088,465

Material:
Die-cast zinc

55

28.5

91.5

27.5

90

70

90

49

55

Systems for the human/machine interface

247

Accessories
Lock systems
Lock cover
For padlocks or multiple locks.
For retrofitting on all sheet steel Command
Panels and Command Panels with display
panel front or VIP frame and with cam lock.

PU
1

Part No. SZ
2493.000

PU
2

Part No. SZ
2493.500

Material:
Die-cast zinc, chrome-plated.

Multiple lock
Prevents unauthorized opening of the
enclosure and accidental activation of the
system.
The multiple lock is the ideal solution in
cases where individual access for several
persons is required for maintenance and
repair purposes.
The multiple lock provides space for
6 padlocks.
Material:
Sheet steel, zinc-plated.

Lock cover
Prepared for a lead seal, suitable for use
with all enclosure types with Rittal-specific
locks, such as sheet steel Command
Panels, Command Panels with display
panel front or VIP 6000 frame.
Material:
Polyamide

248

Color
RAL
7032

PU

Part No. SZ

2

2476.000

German registered design
No. M 92 07 062

Systems for the human/machine interface

Accessories
Lock systems
Enclosure keys
For lock inserts (one double-bit key is
supplied with every enclosure).

Key
Double-bit key no. 5
Security key no. 3524 E
7 mm (0.28
) triangular
key
8 mm (0.31
) triangular
key
7 mm (0.28
) square key
8 mm (0.31
) square key
Daimler key
Fiat Key

Universal enclosure key

2545.000
2546.000
2547.000
2548.000
2521.000
2308.000

Part No. SZ
Universal
enclosure key

2549.000

Accessories

Double-bit, 8 mm (0.31
) square, 8 mm
(0.31
) triangular (also for 7 mm (0.28
)
inserts), with integral screwdriver.

Part No. SZ
2531.000
2532.000

Door stop for VIP 6000,
hinged

Door stop

Part No. CP
6045.000

To secure the open panel.
● For mounting at the bottom.
● The installation height is only reduced by
10 mm (0.39
).
● Opening angle adjustable up to approx.
120°.
Material:
Sheet steel, zinc plated.
Configuration:
Installation hardware.

Systems for the human/machine interface

249

Accessories
Stay
Door stop
To secure the door in the open position at
angles of.
● 90°
● 110°
● 130°

Lifting roller for TS/PC
Lifts the door with heavy installed
equipment (e.g. air conditioner) as a
closing aid. For attaching to the tubular
door frame.

Wiring plan pockets
of sheet steel for PC/IW
For fastening to tubular door frames at any
height.

For

5

Part No.
PS/SZ
4583.000

5

2518.000

PU

TS/PC
AP pedestals
(not illustrated)

PU
10

Part No. PS
4538.000

Clearance opening in
To fit door
mm (inches)
width
mm (inches)
H
W
D

Part No.
PS

260
455
90
(10.24) (17.91) (3.54)

4116.000

600 (23.62")

Color:
Similar to RAL 7044

Wiring plan pockets
made of plastic
For affixing to the inside surfaces of doors.
Material:
Polystyrene with self-adhesive fastening
strips.
Color:
Similar to RAL 7044

250

For format

Clearance opening in
mm (inches)
H

W

D

Part No.
SZ

A3
287
438
45
landscape (11.30) (17.24) (1.77)

2513.000

256
228
17
(10.08) (8.98) (0.69)

2514.000

A5
176
228
17
landscape (6.93) (8.98) (0.69)

2515.000

A4 portrait

Systems for the human/machine interface

Accessories
Roof/interior installation
Roof plates TS
with cutout
For mounting:
● TopTherm roof-mounted cooling unit
● TopTherm roof-mounted fan
● TS vent attachment
The cutouts in the roof plate are arranged
in such a way that the TopTherm roofmounted cooling units are positioned
centrally on the enclosure.
Material:
Sheet steel

For enclosures
To fit the
WxD
mounting of
mm (inches)
TopTherm
3382.XXX
600 x 600
3383.XXX
(23.62 x 23.62) 3384.XXX
3385.XXX

Part No.
TS
8801.300
8801.310

Accessories:
Top-hat rails with integral increments of
holes, to accommodate:
● Cable ties for quick assembly,
see page 220
● Enclosure lights,
see page 268

Configuration:
Installation hardware
Color:
RAL 7035

TopTherm roofmount air conditioners,
see Climate Control Systems brochure,
from page 46.
TopTherm roofmount fans, see Climate
Control Systems brochure, page 154.
TS vent attachment, see Climate Control
Systems brochure, page 178.

13

T3

=
T2

2

B
=

T

1

1

B

B1

B2

T1

T2

T3

Part No. TS

3382.XXX

567.5
(22.34)

475
(18.70)

567.5
(22.34)

260
(10.24)

129 (5.08)

8801.300

3383.XXX
3384.XXX
3385.XXX

567.5
(22.34)

490
(19.27)

567.5
(22.34)

390
(15.35)

61 (2.40)

8801.310

Partial mounting panel TS
for enclosure width 600 mm (23.62
)
For installation in:
● PC enclosure system based on TS
(see page 172 – 175), behind the lower
front door
● IW enclosures (see page 158 – 161),
height 900 and 1000 mm (35.43
 and
39.37
)
● 600 mm (23.62
) wide/deep TS
enclosures
(see Handbook 30, from page 104).

HxW
775 x 500 mm
(30.51 x 19.69)

Accessories

For mounting
TopTherm

Part No. TS
8614.675

Note:
For other partial mounting panels,
see Handbook 30, page 968/969.

Material:
Sheet steel, zinc-plated.
Configuration:
Installation hardware

Systems for the human/machine interface

251

Accessories
Interior installation
Hinge attachment

PU
1 set

for partial mounting panel TS
(see page 251)
in 600 and 800 mm (23.62
 and 31.50
)
wide enclosures.

Additional parts

Material:
Sheet steel, zinc plated.


 Installation kit for swing frames, small

Configuration:
2 hinges, including installation hardware.

see HB 30.

For enclosure width
mm (inches)
600 (23.62)

Examples

Part No. SR
2377.860

Accessories:
Depending on the installation position
 PS system chassis without mounting
flange 23 x 73 mm (0.90
 x 2.87
)
according to the enclosure depth,
see HB 30, page 977.
Support brackets TS 8800.330,
see HB 30, page 979.

In the highest or lowest position.
At the front

Part No. TS
8614.100

Set back
1

1

2
1

1

2

In a central position
At the front

Side installation
Set back
1
1

1

2
1
2

1

1

Side installation of a partial mounting panel
is identical to installation parallel to the
front.

252

Systems for the human/machine interface

Accessories
Interior installation
Retaining rail TS

PU
1 set

locatable
Suitable for:
● Installation behind a PC enclosure,
mounting compartment, small
● Mounting on the vertical section.
Integral 25 mm (0.98
) increments of holes
To accommodate:
– Mounting panel
– System chassis without mounting
flange
via support brackets TS
As a second mounting level with installed:
– Mounting panel infill
– Cable duct
Static load: max. 15 kg (33.07 lbs)

Part No. TS
8612.200

Note:
For more rails, see Handbook 30.
Accessories:
PS system chassis without mounting flange
see Handbook 30, page 977.
TS support bracket,
see Handbook 30, page 979.

Material:
Sheet steel, 2.0 mm (14 ga),
zinc-plated.
Configuration:
Installation hardware

2
114

(6 x 25 = 150)

75

37.5

50

Ø 4.5

Ø7

50

32

204

Mounting panel
For external mounting on:
● Retaining rail TS, locatable, depthadjustable in 25 mm (0.98
) increments,
● System chassiss with mounting flanges,
attached to the outer mounting level.
Material:
Sheet steel, 1.5 mm (16 ga),
zinc-plated.

Enclosure width
mm (inches)
600 (23.62)
800 (31.50)

Accessories

14

16

Part No.
TS
8612.600
8612.800

PU
1
1

Accessories:

50

1.5

114

Ø6

TS system chassis with mounting flange,
see Handbook 30, page 974.

Configuration:
Installation hardware

250

58

30

250

Ø 4.5
557 (757)

Systems for the human/machine interface

253

Accessories
Interior installation
Mounting bracket/
mounting panel
For universal interior installation.
The following accessory components may
be mounted with the mounting bracket for
front panel width 19
:
VIP 6000 and Optipanel*
● C rail PS 4943.000
● Mounting panel KL 1565.700 /
KL 1569.700
● Threaded block TS 8800.340 /
TS 8800.350
VIP 6000
● Support strip PS 4596.000
● System bar PS 4171.000
● System chassis without mounting flange
PS 4376.000
● System chassis with mounting flange
PS 4370.000
● Mounting panel TS 8612.410

Part No. PS
Mounting bracket
4597.000
Mounting panel
4532.000
* from installation depth 100 mm (3.94
)
(see Version 2.1, page 47)
in conjunction with spring nut
CP 6108.000 (page 255).
Configuration:
4 mounting brackets or mounting panels,
12 self-tapping screws M5 x 10 mm (0.39
).
Accessories:
Screws for securing to the screw channels
of the VIP 6000 Command Panel,
Part No. SZ 2504.000 (M5 x 10 mm (0.39
)),
PU = 500,
see page 255.

Material:
Sheet steel, zinc-plated.

Mounting panel

Mounting bracket
110
25

100

t = 1.5 6 (5 x)

12.5

12.5

4.6

16.5

10.5

1.5

6

18

28

6 (3 x)

40

25

16.5 12.5

53

40

10.5

25

12.5

6

12.5

50

60

4.6

100
110

Mounting panels
Sheet steel, zinc plated.

Locatable
on the vertical TS enclosure section or
TS system chassis with mounting flange,
17 x 73 mm (0.67
 x 2.87
), on the inner
and outer mounting level.

PU
4

Part No. TS
8612.400
125
100 = 8 x 12.5

Ø6
.5
Ø4
.6

120

60
110

12.5

100 = 8 x 12.5

12.5

10

Configuration:
4 mounting panels,
8 screws BZ 5.5 x 13 mm (0.51
).

Ø7
5.6

t=2

PU
4
5.6

5.

6

100 = 8 x 12.5

118

Ø4
.6
Ø6
.5

Configuration:
4 mounting panels,
8 screws BZ 5.5 x 13 mm (0.51
).

Part No. TS
8612.410

12.5

Screw-fastened, large
on all enclosures and mounting parts with
system holes in 25 mm (0.98
) increments.

12.5
100 = 8 x 12.5
t=2

254

118

Systems for the human/machine interface

Accessories
Interior installation
C rails

Support rails TS 35

For more detailed information, please refer
to Handbook 30.

to EN 50 022
For more detailed information, please refer
to Handbook 30.

Torx screws
M6 x 12 to fit:
● U nuts for system chassis (PS 4179.000)
● Captive nuts (PS 4164.000)
● Threaded blocks (PS 4162.000)

Torx drive for optimum transmission of
torques, an extended tool life and
increased safety and reliability when
tightening and loosening screw
connections.

Torx screws
For the round holes 4.5 mm (0.18
)
diameter in the enclosure section,
systembars and system chassis without
mounting flanges.

Self-tapping screws
For the round holes 4.5 mm (0.18
)
diameter in the enclosure section, system
bars and system chassis without mounting
flanges.

Self-tapping screws
For metal thickness: 0.8 – 3 mm
(22 ga – 11 ga)
Length: 16 mm (0.63
)
Usable length: 9.5 mm (0.37
)
Width across flats: 8 mm (0.31
)

Type of screw
Torx screws
Torx screws
Torx screws for stainless steel
Self-tapping screws:
● Hex screws
● Pan head screws, posidrive
● Self-tapping screws

Dimensions
M6 x 12 mm (0.47
)
BZ 5.5 x 13 mm (0.51
)
BZ 5.5 x 13 mm (0.51
)

PU
300
300
300

Part No. SZ
2504.500
2486.500
2486.300

M5 x 10 mm (0.39
)
M5 x 12 mm (0.47
)
ST 4.8 x 16 mm (0.63
)

500
500
300

2504.000
2489.000
2487.000

Spring nut M5
For inserting into the channels of the
Optipanel with installation depth 100 and
150 mm (3.94
 and 5.90
) for VIP 6000,
from an installation depth of 185 mm.
Easily positioned, the spring ensures
reliable protection against unintentional
displacement. Other interior installation,
e.g. with mounting bracket PS 4597.000
(see page 254).

PU
50

Part No. CP
6108.000

Material:
Sheet steel, zinc plated.
Systems for the human/machine interface

255

Accessories

Mark, drill and tighten in a single operation
using electric or pneumatic tools.

Accessories
Interior installation
PU
6

Part No. SZ
2373.000

Ø 4.2

28

8

Universal bracket
For installing
● Enclosure lighting
● Door operated switch without/with
connection cable (SZ 2586.000 /
PS 4315.300)
● Cable conduit holders SZ 2593.000 and
SZ 2591.000
● Support rails for terminals in Command
Panels and Command Panel housings
with door
Mounting screws are concealed when the
door is closed. Existing holes for system
mounting blocks or hinges in AE may be
used.
Material:
Sheet steel, zinc plated.
Configuration:
Installation hardware for the accessories
listed.

45

System mounting block
for AE
As an accessory for additional interior
installation, e.g. mounting of cable ties, PS
system bars, top hat rails and C rails (e.g.
for a second pair of mounting angles).
Configuration:
Installation hardware for the applications
listed.

Component shelf, fixed
installation
Corresponding to the enclosure depth, for
direct mounting in the vertical system
holes.
Simply locate into 4 pre-fitted screws and
secure.
Load capacity:
50 kg (110.23 lbs)
Material:
1.5 mm (16 ga) sheet steel
For ES, PC

PU
20

Part No. SZ
2574.000

US patent no. 5,211,499
German patent no. 38 12 939
European patent no. 0338 342
with validity for AT, BE, DE, FR, GB, IT,
NL, SE

For ES, PC, color RAL 7035
For depth*
mm (inches)
620 (24.41)

Part No. PC
4619.660

For TS, color RAL 7015
For depth*
Part No. PC
mm (inches)
600 (23.62)
8800.900
800 (31.50)
8800.910
* for enclosures without mounting panel.

Accessories:
Fan expansion kit DK 7980.000,
see Handbook 30, page 959.

For TS
256

Systems for the human/machine interface

Accessories
Component shelves
Component shelf, Pull-out
For direct attachment on the enclosure
frame. Additional system bars are not
required.
Material:
Sheet steel
Load capacity:
40 kg (88.18 lbs)
Configuration:
2 telescopic slides (supplied loose).

For depth
Color
Part No.
mm (inches)
RAL
IW
600 (23.62)
7015
6902.9601)
800 (31.50
7015
6902.980
1) May also be mounted in 800 mm (31.50
)
deep enclosures based on TS
(rear attachment Pull-out).

Additional parts
When installing more than one extendible
component shelf/drawer tray, the drawer
extension lock is required for work safety to
DIN EN 349, see page 258.

Drawer tray
Pull-out
Individual sub-division is possible using
cross members.
Tray height: 83 mm (3.27
)
Material:
Sheet steel
Load capacity:
40 kg (88.18 lbs)

For depth
mm (inches)
600 (23.62)

Color
RAL
7035

Part No.
IW
6902.700

Accessories:
Cross members, see below.

Configuration:
2 telescopic slides (supplied loose).
Note:
Suitable for installation in all enclosures
without mounting panel, with
W x D 600 x 600/800 mm (23.62
 x 23.62
/
31.50
) based on TS (rear attachment of
telescopic slides extendible).

Additional parts
When installing more than one extendible
component shelf/drawer tray, the drawer
extension lock is required for work safety
reasons to DIN EN 349, see page 258.
Note:
When sub-dividing the drawer tray, one
cross member is always needed for the
entire width (IW 6902.710).

Cross members
for drawer tray
For individual sub-division of the drawer
tray.
Material:
Aluminum, 3 mm (0.12
)
Configuration:
Plastic holder

Systems for the human/machine interface

For
sub-division
in
the full width
half the width

Color
RAL

PU

Part No.
IW

7035
7035

4
6

6902.710
6902.720

Note:
When sub-dividing the drawer tray, one
cross member is always needed for the
entire width (IW 6902.710), see drawing of
drawer tray.

257

Accessories

IW 6902.710

Accessories
Component shelves
Telescopic slides
For location into the vertical frame section.
Additional system chassis are not required.
Fully extendible.
Material:
Sheet steel, zinc-plated.
Load capacity:
40 kg (88.18 lbs) per pair.

PU
1 pair

Part No. IW
6902.800

Note:
In all enclosures, without mounting panel,
with W x D 600 x 600/800 mm
(23.62
 x 23.62
/31.50
) based on TS (rear
attachment of telescopic slides extendible).

Configuration:
Installation hardware

Drawer extension lock
for 600 mm (23.62
) wide enclosures
based on TS 8
To increase work safety.
In conjunction with the catch(see below),
prevents simultaneous extension of up to
5 IW drawers or IW component shelves
and thereby ensures stability.
Material:
Sheet steel, zinc-plated.
Configuration:
PS system chassis with mounting flange
23 x 73 mm (0.90
 x 2.87
) (to match the
enclosure height) and installation
hardware.

For enclosure
height
mm (inches)
900 (35.46)
1000 (39.37)

PU

Part No. IW

1 set
1 set

6902.730
6902.740

Note:
When installing more than one extendible
component shelf/drawer tray, the drawer
extension lock is required for work safety
reasons.
1 PS system bars with mounting flange
23 x 73 mm (0.90
 x 2.87
) (to match the
enclosure height) is required for mounting
in taller enclosures.
Additional parts
Catch for:
● Drawers
● Component shelves (see page 257).

Catch
for drawer extension lock

258

For IW
Drawers
Component
shelves

PU
5

Part No. IW
6902.750

5

6902.760

Systems for the human/machine interface

Accessories
Keyboard drawer
Bracket, locatable for shelves
Simply locate into the vertical TS section.
May be additionally secured with screws.
Support surface for shelves: 200 mm
(7.87
).

PU
3 sets

Color
RAL
7035

Part No. IW
6902.690

Material:
Sheet steel

Keyboard drawer 19
/2 U

Suitable for
● Accommodation of keyboards up
to a maximum of (H x W x D)
32 x 390 x 139 mm
(1.32
 x 15.35
 x 5.47
).
● Support of standard commercially
available mouse or trackball.
Technical specifications:
● Drawer:
– with stop
– in the open position, a high level of
mechanical protection and shielding
effect is preserved
● Front panel
– With security lock (lock no. 12321)
– With handle strip
– With seal.

Height
U

19


2

Depth
mm
(inches)
150
(5.91)

Part No.
CP
6002.000

Material:
Drawer housing:
Sheet steel, zinc plated
Drawer and front panel:
Aluminum, natural anodized
Configuration:
Installation hardware for installation in
VIP 6000/Optipanel Command Panel.
* Note:
For sub-division of the operating front:
● With VIP 6000, a cross member
(recommended) or sealing bar is
required
(see page 24, version 3.2).
At the same time, the end trim (see page
25, version 3.4 2 ) must be selected.
● With Optipanel, a cross member
(see page 48, version 2.2 1 ) is required.

482.6
2

465
284

148.5

139

46

75

60

88

76.2

31

106

4.5

441

Mounting cutout
(for installation in surfaces)

390
79

77

90

139

76.2

Ø 4.5/M4

450
465

Systems for the human/machine interface

259

Accessories

For installation in:
● VIP 6000 Command Panel*
(all installation depths 1 to 9 ,
see page 23).
● Optipanel Command Panel* (installation
depth 3 = 150 mm (5.91
),
see page 47).
● Any sufficiently large surface.
(e.g. door, side panel).
● 19
 systems.

Width

Accessories
Keyboard drawer
Keyboard drawer with
mousepad support

Width

For installation in:
● VIP 6000 Command Panel* (installation
depth 4 , 6 or 8 , see page 23, 3.1)
● Any sufficiently large surface.
(e.g. door, side panel).

19


Depth
Color Part No.
mm
RAL
CP
(inches)
261
3.5
7035 6003.000
(10.28)

Height
U

● Front panel
– Lockable, with 3 mm (0.12
) double-bit
lock, may be exchanged for
lock inserts 27 mm (1.06
),
version A, see page 246,
cylinder insert
(SZ 2571.000) with lock
no. 3524 E and
E1 lock for VW/Audi,
– Folds out as a wrist support
– With seal.

Suitable for accommodating
● Keyboards up to a maximum of
(H x W x D) 42 x 460 x 170 mm
(1.65
 x 18.11
 x 6.69
).
● IP 67 mouse and mousepad
(see page 266).
● Standard mouse and mousepad
Technical design:
● Drawer and enclosure:
– With side pull-out mousepad
support and tray
– Even with the drawer open, a
high level of mechanical protection and
shielding effect is preserved

Material:
Keyboard and drawer: Sheet steel
Front panel: Aluminum, natural anodized.
Configuration:
Installation hardware for installation in
VIP 6000 Command Panel.
* Note:
For sub-division of the operating front a
cross member (see page 24, version 3.2) is
required. At the same time, the end trim
(see page 25, version 3.4 2 ) must be
selected.
Accessories:
Mouse, mousepad IP67,
see page 266.

View without front trim panel
202

155 (3.5 HE)

45

(129)

15

45

469

Installation in the VIP 6000
Cross member

155 (3.5 HE)

472

260

270

End trim

482.6 (19˝)
80

Mounting cutout
for installation in surfaces

206

260

467

Ø 5.5/M5

133

141

475

Front trim panel

482.6 (19˝)

260

Systems for the human/machine interface

Accessories
Keyboard drawer
Support for keyboards
for max. W x D 473 x 210 mm (18.62
 x
8.27
).
With cutout on both sides for:
● Flexible cable tube (CP 6017.100)
● Mounting holes for mousepad support,
vertically hinged (SM 2383.020)
with nylon loop tape for attaching the
keyboard.

Side parts
Extruded
aluminum
section

Color
RAL
7024

PU

Natural 1 set
anodized

Part No.
SM
2383.000

Note:
Other widths available on request.
The support can also be ordered fully
mounted on the Optipanel (see page
46 – 51) or VIP 6000 (see page 22 – 31) via
the design code number.

For external mounting on:
Enclosure surface connector
(SM 2383.010)
Material:
Side parts: Sheet steel
Front and rear:
Extruded aluminum section

Accessories:
Enclosure surface connector,
see page 262.
Mousepad support, vertically hinged,
see page 262.

Configuration:
2 clamping screws, end caps and nylon
loop tape.

473.5
123

45

43

33

71

87

Accessories

210

31.5

1

290

68

31.5

19

473

477
1 = prepared for mousepad support SM 2383.020

Systems for the human/machine interface

261

Accessories
Keyboard drawer
Enclosure surface connector
with smooth outer surface, uninterrupted by
screw attachments. Mounting using spring
nuts from the inside.
To accommodate:
● Support for keyboards (SM 2383.000)
● Optipanel keyboard housing for front
panel width = 19

(Part No. CP 6384.009)
H x W = H* x 19

Installation depth optionally 50 or
100 mm (1.97
 or 3.94
)*.
* Specify in addition to the Part No.
Material:
Extruded aluminum section, natural
anodized
Side cover: Sheet steel

Surface
connector
Side covers

Color
PU
RAL
Natural
anodized 1 set
7024

Part No.
SM
2383.010

Note:
Other widths available on request.
Accessories:
Cross-brace for door,
see page 227.

Configuration:
Installation hardware
Mounting on
surfaces

Mounting underneath
surfaces
79
56

8
40
6°

83

73.5

°

10°

90

15

30°

30°

67
°
45

45
°

Mousepad support
vertically hinged
For mounting on the left/right, beneath
support for keyboards. Latches home
automatically, both when retracted and
extended.
With mounting holes for:
● Mousepad IP 67 (SM 6444.X00)
● Mouse holder (SM 2382.000) to
accommodate the IP 67, NEMA 6
mouse.
With cutouts for cable routing and holes for
attachment via cable ties, for fast assembly
(SZ 2597.000).

PU
1

Part No. SM
2383.020

Accessories:
Mouse/mousepad IP 67,
see page 266.
Mouse holder,
see page 266.
Cable ties for quick assembly,
see page 220.

Material:
Sheet steel, zinc plated

44

23

Configuration:
Installation hardware

211

20

312

30

262

Systems for the human/machine interface

Accessories
Keyboards
Keyboard, pull-out
with integral trackball
Super-slimline keyboard with cursor keys
and trackball. Due to the compact
dimensions of the drawer housing, it is
suitable for installation in all VIP 6000 and
Optipanel Command Panels from an
installation depth of 150 mm (5.91
).
For installation in:
● Command Panels VIP 6000
(see page 23) and
Optipanel (see page 47)
from an installation depth of 150 mm
(5.91
)1)
● 19
 systems
● Any sufficiently large surface.
(e.g. door, side panel).
Technical specifications:
● Keyboard:
H/W/D: 20 x 370 x 138.5 mm
(0.79
 x 14.57
 x 5.45
)
84 short-stroke keys, IBM-AT compatible
(MF2), including cursor keys
With integral 16 mm (0.63
) trackball
German layout 2)
Interface:
2 x 6-pole PS/2
DIN connector
Input voltage: 5 V ± 10%
Input current: 18 mA (5 V DC)
Power consumption: max. 0.1 W
Operating temperature: +5°C to +50°C
(+41F to +122°F)
Storage temperature: –10°C to +60°C
(-14°F to +140°F)
Humidity: max. 95%
(no condensation)

● Drawer extension piece:
Front panel, aluminum, 5 mm (0.20
),
with handle strip. Film similar to
RAL 7035
Handle strip
Seal
with stop (snap-fastening)
of sheet steel, zinc plated
● Drawer housing:
H/W/D: 44 x 422 x 150 mm
(1.73
 x 16.61
 x 5.91
)
of sheet steel, zinc plated
in the open state, a high level of
mechanical protection and shielding
effect is preserved
Cable outlet on the underside
in the right-hand part
● Front panel:
H/W: 88 mm (2 U) x 19

made from aluminum, 5 mm (0.20
),
with film similar to RAL 7035
With cutout for keyboard extension
Protection ratings:
IP 65 to EN 60 529/10.91
Height

Width

Depth

PU

Part No.
CP

88 mm
(2 U)

19


150 mm
(5.91")

1

6002.100

1) For sub-division of the operating front, a
cross member is required for:
● VIP 6000 (see page 24, version 3.2).
At the same time, the end trim (see page
25, version 3.4) must be selected.
● Optipanel (see page 48, version 2.2).
2) Other country versions available on
request.

Systems for the human/machine interface

Accessories

Note:
Lockable version available on request.

263

Accessories
Keyboards
Desktop keyboard NEMA 12
Particularly well-suited to all areas with
dusty or damp industrial atmospheres and
places where hygiene is particularly
crucial, such as in the food industry or
medical technology.
● Sealed, wipeable surface finish.
● High level of mechanical and chemical
resistance to DIN 42 115.
● Lenticular key caps and minimal typing
force for optimum finger guidance and
fast operation.
This makes it ideally suited for workstations
where it is necessary to input large
quantities of data.

Desktop keyboard

Part No. SM
6446.000

Note:
Other country versions and USB
connection available on request.
Configuration:
Connection cable with PS/2 connector
(1.8 m (71
)).

Technical specifications:
H/W/D 220 x 410 x 25 mm
(8.66
 x 16.14
 x 0.98
)
105 keys
Actuation travel/force: 0.4 mm/2 N
(0.02
/17.7 lbf)
Service life: ≥ 1 million switching cycles
Operating temperature: –20°C to +70°C
(–4°F to +158°F)
German layout

Stainless steel keyboard
19
/4 U

Part No. SM

based on the piezo system
With this innovative technology, merely
tapping lightly with your finger is sufficent
to initiate switching. There are no edges,
cracks or hollows, as with conventional
keyboards. This makes it particularly
suitable for use in the food industry.
For installation in:
● Console systems AP,
see page 196 – 199
● PC enclosure systems,
see page 180
● CP Premium Panel,
see page 60.

Stainless steel
keyboard

6446.010

Protection ratings:
IP 67 to EN 60 529/10.91
Note:
Other country versions available on
request.
Material:
Type 304 stainless steel
Type 316L (on request).
Configuration:
Connection cable (1.8 m (71
)) with
PS/2 connector and hex nuts.

Technical specifications:
Dimensions of front panel
H/W/D 177 x 19
 x 3.7 mm
(6.97
 x 19
 x 0.15
)
Installation depth 25 mm (0.98
)
For installation in desk sections,
AP console systems, PC enclosure systems
Mounting version wtih threaded bolts at the
rear 105 keys
Actuation travel/force: 0 mm/0.7 N (6.2 lbf)
Service life: ≥ 10 million switching cycles
Keypad: Abrasion-resistant electrolyte
lettering
Operating temperature: –25°C to +75°C
(–13°F to +167°F)
PS/2 and USB connection
German layout
Front panel cutout

464.6
5

159

174

105

7

232.3

170

479.6
Seal

264

Holes for fastening bolts

Systems for the human/machine interface

Accessories
TFT monitor
TFT monitor
Installation in flat for surfaces and
Command Panels.
Particular benefits:
● Suitable for industrial use
● Reduced installation work due to integral
front frame
● No additional ventilation required with
horizontal or vertical installation.
The resistive touchscreen is ideally suited
for operation with a pen, finger or glove.
Technical specifications:
Resolution max.:
15
: 1024 x 768 pixels,
VGA + XGA non-interlaced
17
: 1280 x 1024 pixels,
VGA + SXGA non-interlaced
Colors: 16.7 million
Brightness: 250 cd/m2
Reading angle: 130° horizontal,
110° vertical
Contrast ratio: 300 : 1
MTBF backlight: 50000 h
Voltage: 12 V DC
On Screen Display (OSD) at rear
VGA input: 15 pin D-Sub
Operating temperature: 0°C to +50°C
(32°F to 122°F)

Part No. SM
TFT monitor 15

With anti-reflection
coated safety glass
screen
TFT monitor 17

With anti-reflection
coated safety glass
screen
TFT monitor 15

with touchscreen
TFT monitor 17

with touchscreen

6450.010

6450.020

6450.030
6450.040

Additional parts
Mounting kit CP 6053.500
(for installation in VIP 6000 and Optipanel),
see page 233.

Protection ratings:
IP 65 to EN 60 529/10.91, front
Front frame:
Size:
15
: H/W 343 x 430 mm (13.50
 x 16.93
)
17
: H/W 354.8 x 482.6 mm (13.97
 x 19
)
Aluminum, powder coated in RAL 7035
Threaded bolts M5 at rear
(15
 = 12/17
 = 14)
Note:
Monitor fully fitted in the enclosure
e. g. Optipanel, see from page 46,
available on request.

Accessories

Configuration:
Seal and hex nuts
(for installation in surfaces).

Power pack for TFT monitor
● With IEC 320 socket,
● With connection cable (1.5 m (59
)) and
connector for connecting to the TFT
monitor.

PU
1

Part No. SM
6450.050

PU
1

Part No. SM
6450.060

H/W/D 30 x 107 x 59 mm
(1.18
 x 4.21
 x 2.32
).
Technical specifications:
Input voltage: 100 – 240 V AC
Output voltage 12 V DC
Material:
Enclosure: Plastic

Connection cable
for power pack
With IEC connector at one end,
Length: 1.5 m (59
).

Systems for the human/machine interface

265

Accessories
Mouse/mousepad
Mouse, mousepad IP67

Technical specifications:

An ideal input device for all areas where
heavy contamination is unavoidable, or
where exceptional standards of hygiene
are required, for example in the food
industry or medical technology.
Because the mouse detects positions
inductively, there is no need for a trackball,
and the housing can be completely sealed
with a protective film. This achieves a high
protection category of IP 67.
The mouse will only work in conjunction
with the inductive mousepad IP 67.

IP 67, NEMA 6 mouse
Mouse/mousepad connector:
DIN 7-pole

Material:
Mousepad: Plastic PBT
Mouse: Plastic ABS

Mouse pad PS/2 interface
Mouse pad – PC connection:
PS/2 connector
Temperature range: 0°C to +55°C
(32°F to 131°F)
Power consumption: < 20 mA
Cable lengths: 2000 mm (78.74
)
Operates under DOS, Windows 3.1/3.11,
Windows 95/ 98/ME, Windows NT/2000
Accessories:
Connector gland (SZ 2400.500),
see page 220.
Mousepad support,
see below.

H/W/D in mm
Color
(inches)
RAL
Inductive mouse pad IP 67
205 x 250 x 15
gray similar to
PS/2 interface
(9.84 x 8.07 x 0.59)
7035
gray similar to
Mouse IP 67
–
7032
for mousepad SM 6444.000 / .500
* German patent no. 198 51 619

Mousepad support
For
● Operating housings
● Surfaces
To fit IP 67 mousepad SM 6444.000 and
SM 6444.500. The angle of the mousepad
support is individually adjustable.
Two holes are needed on the enclosure for
attachment purposes.
Material:
Sheet steel, zinc plated
Configuration:
Installation hardware

Mouse holder
To match the mousepad support and for
secure accommodation of a standard
mouse or the IP 67 mouse SM 6445.000.
Material:
Sheet steel, zinc plated
Configuration:
Installation hardware

266

Weight
kg (lbs)
1.0 (2.20)

Part No. SM
6444.500*
6445.000

Part No. SM
2381.000

Accessories:
Mouse holder,
see below.
Mouse, mousepad IP 67,
see above.
Additional parts
Vertical handle set for wide frames,
see page 236
(when mounting on the VIP 6000 with wide
front frame).

Weight
kg (lbs)
0.3 (0.66)

Part No. SM
2382.000

Additional parts
Mouse pad support,
see above.

Systems for the human/machine interface

Accessories
Mobile workstation
Mobile workstation

Color
RAL
7035

for tower PCs, printers, UPS, servers etc.
Material:
Sheet steel
Load capacity:
75 kg (165.35 lbs)

PU

Part No. PC

1

4641.000

Accessories:

Configuration:
Mobile workstation consisting of:
1 mounting frame
2 shelves, top/bottom
1 set telescopic slide
1 handle
1 cable support, hinged
Installation hardware.

Fastening bolts DK 7115.000,
see Handbook 30, page 993.

Additional parts
For installation in
IW, TS, PC based on TS
ES, PC based on ES/PS
2 system chassis with
2 system chassis without
mounting flanges,
mounting flanges1),
see page 272
see HB 30, page 977
600 (23.62)
TS 8612.060
PS 4376.000
800 (31.50)
TS 8612.080
PS 4377.000
plus 4 support brackets
PS 4183.000, see HB 30, page 979,
8 threaded blocks M6 PS 4162.000, see HB 30, page 982,
8 screws M6
SZ 2504.500, see page 255.
For enclosure depth
mm (inches)

1)

451
55

614

524

550

45

25

391

19

45

25

220

471

Accessories

471

Base
for mobile workstation
To accommodate additional equipment
such as modems, power packs etc. or
simply as a paper tray.
The shelf may be attached to the mobile
workstation with height adjustment in
25 mm (0.98
) increments.
Material:
Sheet steel

Color
RAL
7035

PU

Part No. PC

1

4642.000

Accessories:
Fastening bolts DK 7115.000,
see Handbook 30, page 993.

Configuration:
Installation hardware

Systems for the human/machine interface

267

Accessories
Lights
System light
With door operated switch
Additionally with floating normally open
contact for switching equipment such as
fans, signal lights, contactors etc.
By using connector SZ 2507.400
(see HB 30, page 999), the jack may
be used.
Protection ratings:
IP 20 to EN 60 529/10.91
Note:
For more lights, see Handbook 30,
from page 997.
Z
X

Accessories:

B

Assembly accessories for mounting system
lights,
see HB 30, page 998.
Connection accessories,
see HB 30, page 999.

Y

Part No. SZ
Standard Courtesy
light
light
14 kW, 230 V, 50 Hz 452 (17.80) 50 (1.97) 117(4.61) 275 (10.83) 4138.150 4139.150
18 kW, 230 V, 50 Hz 682 (26.85) 50 (1.97) 117(4.61) 400(1.57) 4138.190 4139.190
30 kW, 230 V, 50 Hz 987(38.86) 50 (1.97) 117(4.61) 600 (23.62) 4138.350 4139.350
with fluorescent lamp, socket G 13, length 375/604/908 mm (14.76
/23.78
/35.75
).
Light: Universal white
Technical
specifications

X
mm/
(inches)

Y
mm/
(inches)

Z
mm
(inches)

Standard Courtesy
light
light

Equipment
Sockets and connectors for:
– Power supply
– Through-wiring
Jack for normally open contact
Socket
Interference suppression via:
– Radio interference suppression capacitor
– Semi-electronic ballast with integral RC element
Rocker switch for manual actuation
Light cover

Signal pillars
Rittal has extended its versatile range with
another useful component:
Perfect remote monitoring
● Problem-free remote monitoring of
individual plant or machine controllers.
● Direct, fast intervention in the event of
malfunctions and emergencies.
Flexible configuration
● Simple assembly and contact using
bayonet fastener.
● Configuration of up to five
components with the same voltage.
● The incandescent lamps are replaced in
seconds – no need for tools.
● Components are available in a range of
colors and voltages.

B
mm
(inches)

●
●
●
●
●
●

●
●
●

Simply order the signal pillar as well,
and get everything you need from a
single source!
More detailed information on the signal
pillar can be found in Handbook 30,
page 1000 – 1002.

C

268

●
●
●
●

US

Systems for the human/machine interface

Accessories
Voltage supply
Power strips
Variable attachment facilities using a
bracket that may be fitted in four positions.
For mounting on:
● 19
 mounting angles
● Enclosure frame IW/TS/PC
● Any sufficiently large surface.
May be used on all sections in 25 mm
(0.98
) increments without the need for
additional mounting accessories.
Unrestricted use of angular connectors is
supported via positioning at a 45° angle.

UPS strip
With red socket inserts to indicate the
equipment protected by a UPS. Connection
cable with IEC 320 connector
Cable: H05VV-F3G1.0/rated current: 10 A
RCCB protection
To protect human life. With residual-current
circuit-breaker I∆n 30 mA to DIN 49440.

Versions:

RCCB and line protection
To protect:
● Persons
● Cables from short-circuit and overload.
With residual-current circuit-breaker
I∆n 30 mA to DIN 49 440.
Circuit-breaker 16 A/250 V~.

Rocker switch:
Illuminated, 2-pole, with safety bars to
prevent unintentional contact.

Technical description:
Rated voltage: 250 V
Rated current: 16 A

Master/slave:
Electronic automatic switching unit, 2-pole.
Switching threshold adjustable from 8 W to
30 W. Equipment with energy-saving or
stand-by function cannot be used as the
master.
Power consumption of master unit:
ON state: At least 8 W
OFF state: max. 35 W

Connection cable 2 m (78.75
) long
H05VVW-F3G1.5

Overvoltage protection and interference
suppression filter
To protect connected equipment against:
● Voltage peaks in the mains
● High-frequency interference voltage from
the mains and connected equipment.
The green ready light is extinguished in the
event of disconnection or malfunctions.
Connected equipment is disconnected
from the mains (thermal disconnection).

Dimensions:
Height: 44 mm (1 U)
Length: 19

Depth: 44 mm / 80 mm (1.73
 / 3.15
)

Version

Number
of sockets frames

Configuration:
Two mounting brackets and installation
hardware.

Standards:
Sockets:
DIN 49 440 / DIN VDE 0620 / 05.92
Overvoltage protection:
E DIN VDE 0675 part 6-6 /A1 and 6-6 /A2
EMC interference suppression filter:
EN 1332000: 1994
Note:
In other lengths and with other functional
elements,
see HB 30, page 1006/1007.

Attachment
Mounting
dimension
Wallmount
19

(mm
distributor, mounting
(inches))*
horizontal angles
●
●
452.5 (17.81
)
●
●
452.5 (17.81
)

Accessories

Requirement category D
Surge current resistance per conductor:
2.5 kA
at UOC = 2.5 kV
Maximum surge strength: 8.0 kA
Rated arrester voltage: 260 V

Material:
Aluminum section natural anodized,
Socket inserts polycarbonate.

Part No.
DK

Without switch
7
●
7240.210
With switch
7
●
7240.220
Overvoltage
protection and
interference
5
●
●
●
452.5 (17.81
) 7240.230
suppressor
filter
Master/slave
1+3
●
●
●
452.5 (17.81
) 7240.250
UPS strip
7
●
●
●
452.5 (17.81
) 7240.260
RCCB
5
●
●
●
452.5 (17.81
) 7240.280
RCCB and line
5
●
●
●
452.5 (17.81
) 7240.290
protection
* Variable mounting distance within a range of 25 mm (0.98
), the dimension given is
hole center to hole center of the mounting bracket.

K 7240.2XX / DK 7240.510

482.6

Systems for the human/machine interface

44

31.75

452.5

269

Accessories
Grounding
Grounding straps
10 mm2
For configuring a reliable grounding
connection with perfect contact.
● with ring terminals in M6 and M8 to
match the grounding screw
● length-optimized and ready to install.

Connection
M6 – M6
M6 – M8
M8 – M8

For
KL, EB,
AE 1032.XXX,
AE 1035.XXX
AE, AP
TS, ES, PC,
AP universal
console, KEL

Door/lid

Enclosure

M6

M6

M6

M8

M8

M8

PU

Part No. SZ

5

2565.100

5

2565.110

5

2565.120

200 mm
(7.87
)
300 mm
(11.81
)
300 mm
(11.81
)

As an alternative,
can be used:
Ground straps,
see HB 30, page 1011 or
grounding strap, see below.

Grounding strap
Tin-plated copper, in various lengths and
cross-sections with press-fitted contact
rings. Grounding straps counteract the
current displacement effect at high
frequencies, while at the same time offering
highly flexible connection opportunities.

Length

For

Crosssection
Length
mm2
mm (inches)
2
(inches )

PU

Part No.
SZ

M6

10 (0.02)

200 (7.87)

10

2412.210

M8

16 (0.02)

200 (7.87)

10

2412.216

M8

25 (0.04)

200 (7.87)

10

2412.225

M6

10 (0.02)

300 (11.81)

10

2412.310

M8

16 (0.02)

300 (11.81)

10

2412.316

M8

25 (0.04)

300 (11.81)

10

2412.325

Accessories:
Central grounding point,
see HB 30, page 1012.

Contact washers
Toothed contact washers facilitate secure
PE conductor connection. As a result, there
is no need to manually strip paint in the
connection area.

Grounding rail, horizontal
(potential equalization rail)
With two isolators, 20 M5 earth connections
and 2 ground connections for 25 mm2
(0.04
)2.
Current carrying capacity approx. 200 A.
Configuration:
Grounding rail made from E-Cu 57 to
DIN 1759, DIN 40 500, 15 x 5 mm (0.2
),
20 connection points M5,
2 grounding connections 25 mm2 (0.04
)2,
2 isolators, including installation hardware.

270

Size
M5
M6
M8

PU
100
100
100

Part No. SZ
2343.000
2334.000
2335.000

Length
450 mm
(17.72
)

PU

Part No. DK

1

7113.000

Note:
Other grounding accessories,
see HB 30.

Systems for the human/machine interface

Accessories
Grounding/swing frames
Grounding plate
The grounding cable, e.g. coming from the
support arm, is attached to the central
grounding point. Up to eight control
components may be grounded internally
on the grounding plate using flat-pin
connectors 6.3. This makes grounding
inside the enclosure easier, and also
reduces the amount of assembly work
involved.

PU
1

Part No. SZ
2570.500

Mounting is achieved via attachment holes
at a spacing of 75 mm (2.95
), in the case
of the VIP 6000 and Optipanel using screw
channels or spring nuts, and in the case of
the TS 8 using in frame of holes.
Material:
Stainless steel
Configuration:
Installation hardware for panel and
grounding bolts.

Swing frames

Accessories

See Handbook 30,
Page 1014 – 1021.

Systems for the human/machine interface

271

Accessories
19
 configuration
Mounting angles, 19
 for
DK-TS
In two versions:
C-shaped
The integral U markings in the front
facilitate systematic assembly within the
19
 attachment level.

L-shaped
The L-shaped cross rails accommodate the
installation kits of server systems. In order
to attach slide rails or component shelves
from the accessory range, adaptor
DK 7827.300 is required. The integral U
markings in the front facilitate systematic
assembly within the 19
 attachment level.

Full
inst.
enclosure
height
mm (inches)
600 (23.62)
800 (31.50)
1000 (39.37)
1200 (47.24)
1400 (55.12)
1600 (62.99)
Packs of 2

Part No. DK
U

11
15
20
24
29
33

C-shaped L-shaped
–
7827.080
7827.100
7827.120
7827.140
7827.160

7827.061
7827.081
7827.101
7827.121
7827.141
7827.161

Technical specifications:
2 mm (14 ga) sheet steel, with integral
19
 punchings and side round and square
holes.
Zinc-plated, for conductive connection of
the 19
 installed equipment.
Configuration:
Including installation hardware
Accessories:
L-shaped design:
Adaptor DK 7827.300,
see HB 30, page 1031.

TS system chassis with
mounting flange
17 x 73 mm (0.67
 x 2.87
),
notched
As divider kit for mounting angles,
enclosure width 600 mm (23.62
), server
racks
The system chassis with mounting flanges
have a cutout in the middle and are
prepared for combining with plug-in side
walls. 3 rows of holes facilitate universal
skeleton structures or partial assembly and
the accommodation of mounting angles.
One pack is sufficient for installing one or
two 19
/metric attachment levels.

272

For enclosures
Width
Depth
mm
mm
(inches)
(inches)
600
(23.62)
800
600
(31.50)
(23.62)
900
(35.43)

PU

Part No.
TS/DK

4

8612.060

4

8612.080

4

8612.090

Material:
Sheet steel, zinc-plated.
Configuration:
4 depth rails, including installation
hardware.

Systems for the human/machine interface

Accessories
19
 configuration
Assembly screws
M5 x 16 mm (0.63
)/
M6 x 16 mm (0.63
)
For 19
 electronic equipment and blanking
panels, including plastic washers.

Torx screw
M5 x 16 mm (0.63
)/
M6 x 16 mm (0.63
)

Version
Phillips-head screw
M5
Cheese-head screw
M6
Phillips-head screw
M6

M5
M6

Bit size
Torx 25
Torx 30

PU

Part No.
EL

100

2099.500

100

2093.200

100

2089.000

PU
100
100

Part No. DK
7094.500
7094.600

For optimum transmission of torques, an
extended tool life and increased safety and
reliability when tightening and loosening
screw connections.
Configuration:
Assembly screws with Torx screw head
including plastic washers.

For the attachment of rack-mounted
electronic equipment, 19
 installed
equipment and blanking panels to
mounting angles, 19
.
For use with metal thickness from
0.8 – 2.0 mm (22 – 14 ga). In areas of
narrow tolerance, the captive nuts for metal
thicknesses of 1.2 – 1.5 mm (18 – 16 ga)
should be used. Optionally with or without
contact of the installed equipment to the
19
 section/enclosure.

Captive nut M5
Design
With
contact
Without
contact

Captive nut M6
Design
With
contact
Without
contact
With
contact
Without
contact

Electronics
See Handbook 30,
page 314 – 445.

For metal
Part No.
PU thick-nesses
EL
mm (inches)
0.8 – 2.0
50
2094.500
(22 – 14 ga)
0.8 – 2.0
50
2092.500
(22 – 14 ga)

For metal
PU thick-nesses
mm (inches)
0.8 – 2.0
50
(22 – 14 ga)
0,8 – 2.0
50
(22 – 14 ga)
1.2 – 1.5
50
(18 – 16 ga)
1.2 – 1.5
50
(18 – 16 ga)

Part No.
EL
2094.200
2092.200
2094.300
2092.300

19
 installation
system
See Handbook 30,
page 1014 – 1059.

273

Accessories

Captive nuts M5/M6

Table of order numbers
Part No.
1158.000
1158.030
1158.040
1158.060
1158.500
1158.530
1158.540
1158.560
1581.000
1581.100
1582.000
1648.600
1652.600
2089.000
2092.200
2092.300
2092.500
2093.200
2094.200
2094.300
2094.500
2099.500
2307.000
2308.000
2334.000
2335.000
2343.000
2373.000
2375.000
2375.020
2377.860
2381.000
2382.000
2383.000
2383.010
2383.020
2389.000
2389.100
2400.300
2400.500
2412.210
2412.216
2412.225
2412.310
2412.316
2412.325
2433.000
2435.000
2439.000
2450.000
2451.000
2452.000
2454.000
2455.000
2456.000
2460.000
2460.650
2461.000
2462.000
2463.000
2464.000
2465.000
2466.000
2467.000
2468.000
2469.000
2476.000
2482.000
2482.100
2482.200

274

Page
217
217
217
217
217
217
217
217
218
217
218
185
185
273
273
273
273
273
273
273
273
273
246
249
270
270
270
256
115
115
252
266
266
261
228, 262
262
235
235
220
220
270
270
270
270
270
270
229
245
245
245
245
245
245
245
245
246
246
246
246
246
246
246
246
244
244
244
248
240
240
240

Part No.
2483.000
2484.000
2485.000
2486.300
2486.500
2487.000
2489.000
2493.000
2493.500
2503.000
2504.000
2504.500
2508.000
2513.000
2514.000
2515.000
2518.000
2521.000
2522.000
2523.000
2525.000
2526.000
2527.000
2528.000
2531.000
2532.000
2533.000
2534.000
2534.500
2535.000
2536.000
2545.000
2546.000
2547.000
2548.000
2549.000
2554.000
2555.000
2556.000
2557.000
2558.000
2565.100
2565.110
2565.120
2570.500
2571.000
2572.000
2573.000
2574.000
2575.000
2576.000
2584.000
2589.000
2590.000
2591.000
2592.000
2593.000
2594.000
2595.000
2596.000
2597.000
2600.600
2610.600
2611.200
2612.600
2613.200
2614.600
2615.200
2616.200
2620.600

Page
246
246
245
255
255
255
255
248
248
229
255
255
229
250
250
250
250
249
246
246
247
246
246
246
249
249
245
247
247
246
246
249
249
249
249
249
246
246
246
246
246
270
270
270
271
247
246
217
256
246
245
230
223
223
223
223
223
223
223
223
220
185, 187
185, 187
185, 187
185, 186
185, 187
185, 186
185, 186
185, 186
185, 187

Part No.
2630.600
2640.600
2641.200
2642.600
2643.200
2644.600
2645.200
2646.200
2647.600
2648.600
2649.600
2650.600
2651.200
2652.600
2653.200
2654.600
2655.200
2656.200
2662.600
2663.600
2664.600
2666.600
2668.600
2670.600
2672.600
2676.000
2678.000
2682.000
2683.600
2684.600
2685.600
2686.600
2688.600
2689.600
2690.000
2691.000
2694.600
2695.600
2696.200
2697.450
2735.100
2735.110
2735.120
2735.130
2735.140
2736.100
2736.110
2736.120
2736.130
2736.140
2737.100
2737.110
2737.120
2737.130
2737.140
2738.100
2738.110
2738.120
2738.130
2738.140
2793.560
2793.760
2807.200
2808.200
2813.200
2814.200
2817.000
2819.000
2819.200
2841.200

Page
185, 187
185, 187
185, 187
185, 186
185, 187
185, 186
185, 186
185, 186
185, 186
185, 186
185, 186
185, 187
185, 187
185, 186
185, 187
185, 186
185, 186
185, 186
185, 186
185, 186
185, 186
192
192
192
192
230
230
230
196
196
196
196
198
198
231
231
194
194
231
211
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
242
241
241
208
208
208
208
215
210
210
185, 208

Part No.
2842.200
2846.200
2847.200
2851.200
2852.200
2855.000
2859.000
2863.200
2864.200
2865.000
2867.000
2868.000
2869.000
2870.000
2875.000
2876.000
2877.000
2878.000
2885.000
2886.000
2889.000
2890.000
2891.200
2892.200
2901.200
2902.200
2907.000
2908.000
2911.200
2912.200
2913.000
2921.200
2922.000
2922.200
2961.200
2962.200
2979.200
2980.200
2981.200
2981.235
2982.200
2982.235
2983.200
2984.200
3201.100
3202.100
4116.000
4138.150
4138.190
4138.350
4139.150
4139.190
4139.350
4156.000
4189.000
4191.000
4192.000
4193.000
4196.000
4311.000
4316.000
4317.000
4318.000
4336.000
4532.000
4538.000
4570.000
4583.000
4595.000
4597.000

Page
185, 208
208
208
185, 208
185, 208
209
214
185, 208
185, 208
209
209
209
209
209
209
209
209
209
209
209
214
214
208
208
185, 208
185, 208
210
210
208
208
210
185, 208
185
208
185, 208
185, 208
212
212
212
212
212
212
212
212
202
202
250
268
268
268
268
268
268
241
241
223
223
223
223
216
216
216
216
223
254
250
210
250
230
254

Part No.
4603.603
4603.703
4603.704
4603.913
4603.920
4609.703
4609.920
4611.000
4612.000
4614.000
4619.660
4634.000
4634.500
4641.000
4642.000
4650.000
4650.704
4757.000
6002.000
6002.100
6003.000
6004.000
6004.009
6004.100
6004.109
6005.100
6006.000
6013.000
6013.500
6015.000
6015.009
6015.300
6015.309
6015.500
6015.509
6016.100
6016.200
6017.000
6017.100
6019.000
6023.000
6027.000
6027.100
6027.110
6027.120
6027.200
6027.210
6027.220
6027.500
6027.509
6027.510
6027.520
6028.000
6029.000
6040.000
6045.000
6050.000
6050.500
6052.000
6052.500
6053.000
6053.200
6053.500
6058.000
6058.500
6059.000
6059.500
6100.000
6100.500
6101.000

Page
176
176
178
176
178
176
178
213
214
177
256
213
213
267
267
180
180
231
259
263
260
204
204
204
204
228
226
239
239
234
234
234
234
234
234
226
226
227
227
232
123
232
233
233
233
233
233
233
232
232
232
232
232
232
124
249
120
120
221
221
233
233
233
233
233
221
221
120
120
236

Systems for the human/machine interface

Table of order numbers
Part No.
6101.009
6102.000
6102.009
6103.000
6107.000
6107.100
6107.200
6108.000
6110.000
6110.100
6120.000
6130.000
6130.500
6130.600
6135.000
6136.000
6136.500
6137.035
6137.535
6139.000
6140.000
6141.000
6141.100
6141.200
6142.000
6142.010
6142.020
6142.030
6142.100
6143.200
6143.210
6143.300
6143.310
6144.100
6145.100
6146.100
6146.200
6146.300
6146.400
6147.000
6148.000
6150.000
6160.000
6170.000
6180.000
6190.000
6191.000
6192.000
6193.000
6194.000
6195.000
6200.000
6200.500
6205.000
6214.500
6214.XX0
6220.XX0
6340.000
6340.010
6340.020
6340.100
6340.110
6340.120
6340.200
6340.210
6340.220
6340.300
6340.310
6340.320
6340.400

Page
236
236
236
236
238
238
238
255
125
126
126
123
122
122
147
145
145
146
146
138
127
142
142
143, 162
134
135
135
135
135
144, 145
144, 218
144, 145
144, 218
162, 215
162, 215
140, 141
140, 141
140
140, 141
162, 215
140, 213
124
122
125
127
239
239
239
239
239
239
120
120
120
149
148
148
58
58
58
58
58
58
58
58
58
58
58
58
58

Part No.
6340.410
6340.420
6341.000
6380.000
6380.100
6385.010
6385.019
6385.020
6385.029
6385.030
6386.000
6386.009
6386.300
6386.309
6442.200
6444.000
6444.500
6445.000
6446.000
6446.010
6450.010
6450.020
6450.030
6450.040
6450.050
6450.060
6462.200
6501.000
6501.010
6501.020
6501.030
6501.040
6501.050
6501.060
6501.070
6501.080
6501.090
6501.100
6501.110
6501.200
6501.210
6501.220
6501.230
6501.240
6501.250
6501.260
6501.270
6501.280
6501.290
6501.300
6501.310
6501.320
6501.330
6501.340
6501.350
6503.000
6505.100
6505.200
6505.500
6508.000
6508.010
6508.100
6509.000
6509.010
6510.210
6510.310
6511.000
6511.010
6513.000
6513.010

Systems for the human/machine interface

Page
58
58
227
52
52
237
237
237
237
237
234
234
234
234
70
266
266
266
264
264
265
265
265
265
265
265
70
88
88
88
88
90
90
90
90
89, 103
89, 103
89
89
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
218
222
222
222
108
108
109
102, 137
102, 137
100
100
102, 144
102
102, 144
102

Part No.
6514.100
6514.110
6515.000
6515.010
6519.000
6519.010
6520.000
6520.010
6520.500
6520.510
6521.000
6521.010
6522.000
6522.010
6523.000
6523.010
6524.000
6524.010
6524.200
6524.210
6525.000
6525.010
6525.100
6525.110
6525.200
6525.210
6525.500
6525.510
6525.600
6525.610
6526.000
6526.010
6527.000
6527.010
6527.100
6527.110
6528.000
6528.100
6528.200
6528.210
6528.300
6528.500
6529.000
6529.010
6530.200
6531.200
6532.200
6533.200
6534.000
6535.000
6535.010
6536.000
6536.010
6537.000
6538.000
6538.010
6539.010
6540.200
6541.009
6542.000
6543.000
6544.000
6552.200
6660.000
6660.010
6660.020
6660.050
6660.100
6660.110
6660.120

Page
229
229
102, 144
102
102
102
105, 109
105, 109
105
105
113
113
114
114
114
114
115
115
113
113
109
109
109
109
107
107
106
106
106
106
112
112
111
111
111
111
104, 121
103, 121
219
219
219
104, 121
112
112
68
68
68
68
66
66
74
66
74
66
66
74
74
68
72
66
66
66
70
92
92, 144
92, 144
92, 144
92
92
92

Part No.
6660.200
6660.210
6660.220
6662.200
6663.000
6663.400
6663.500
6664.000
6664.100
6664.500
6665.000
6665.500
6670.000
6672.000
6680.000
6680.010
6680.100
6680.110
6681.000
6681.100
6682.000
6900.000
6900.100
6900.200
6900.400
6900.600
6901.000
6901.100
6901.200
6902.000
6902.010
6902.020
6902.030
6902.100
6902.110
6902.120
6902.130
6902.300
6902.310
6902.320
6902.400
6902.500
6902.510
6902.610
6902.620
6902.630
6902.640
6902.650
6902.660
6902.670
6902.680
6902.690
6902.700
6902.710
6902.720
6902.730
6902.740
6902.750
6902.760
6902.770
6902.780
6902.800
6902.960
6902.980
7077.000
7078.000
7094.500
7094.600
7097.000
7097.220

Page
92
92
92
70
94
94
94
93
93
93, 144
95
95
76
76
60
60
60
60
60
60
60, 61
156
156
156
158
158
156
158
158
160
160
160
160
160
160
160
160
160
162
162
160
164
164
225
225
224
110, 162
224
222
91
225
259
257
257
257
258
258
258
258
222
139
258
257
257
223
223
273
273
223
223

Part No.
7097.260
7097.300
7097.340
7098.000
7099.000
7113.000
7240.210
7240.220
7240.230
7240.250
7240.260
7240.280
7240.290
7827.061
7827.080
7827.081
7827.100
7827.101
7827.120
7827.121
7827.140
7827.141
7827.160
7827.161
8360.920
8366.000
8366.100
8366.200
8366.300
8366.400
8368.000
8368.100
8601.060
8601.080
8601.450
8601.600
8601.610
8601.615
8601.680
8602.060
8602.080
8602.600
8611.040
8611.060
8611.070
8611.270
8611.300
8612.060
8612.080
8612.090
8612.200
8612.400
8612.410
8612.600
8612.800
8614.100
8614.675
8700.600
8800.220
8800.290
8800.390
8800.830
8800.900
8800.910
8800.920
8800.930
8800.960
8800.980
8801.300
8801.310

Page
223
223
223
223
223
270
269
269
269
269
269
269
269
272
272
272
272
272
272
272
272
272
272
272
207
172
174
174
172
172
172
174
206
206
211
206
207
207
211
206
206
206
244
244
244
244
244
272
272
272
253
254
254
253
253
252
251
216
214
212
210
213
256
256
207
207
227
227
251
251

275

Index

Numerics
10° tilting adaptor
– CP-L, rectangular
– CP-L, round
– CP-S stainless steel
– CP-XL
25° / 60° tilting adaptor
– CP-XL
482.6 mm (19") mounting angles
90° support tube bracket
– CP-L

111
111
93
123
124
272
102

A
Adaptor
– for comfort handle
244
– for levelling feet
214
– for twin castors
212
Adaptor plate
222
Adjustment set for support section
– CP-XL
120
Aluminum strip for AP
230
Angle adaptor 90°
– CP-L to CP-S
89, 103
– CP-XL to CP-L
103, 121
Angle coupling, 90°
– CP-L, round
112
– CP-XL
124
Angle joint 90°
– CP-L
113
Angle piece 90°
– CP-L
115
– CP-XL
127
AP universal consoles
– Sheet steel
194
– Stainless steel
198
Assembly bolts for base/plinth
210
Assembly kit for externally mounted
accessories
135
Assembly plate, floor
215
Assembly screws M5 x 16 mm (0.63
)/
M6 x 16 mm (0.63
)
273
Attachment
– CP-S
90
– Hinge attachment
252
– Pole clamp
230

B
Base
– for Industrial Workstations
– for operating housing
Base assembly plate
Base for mobile workstation
Base mount
– Swivel, CP-S stainless steel
Base plate, pedestal, large
Base plate, pedestal, small
Base/plinth
– Assembly bolts
– Complete
– Complete, stainless steel
– Mobile
Base/plinth adaptor for twin castors
Base/plinth components, front and
rear for TS
Base/plinth trim panels, side for TS
Base/plinth trim with brush strip for TS

276

143
147
215
267
215
94
146
145
210
208
209
212
212
206
206
207

Base/plinth trim, modular
210
Bracket, locatable for shelves
259
Built-in trim panel and spacer panel
234
Busbar connection adaptor
– CP-L to CP-XL
104, 121

Cross members
– adjustable
– for drawer tray
Cross-brace for door
Cylinder inserts

C

D

Cable clamp rails
223
Cable clamping bracket
221
Cable clamps
223
Cable conduit and holder
223
Cable entry grommets
216
Cable entry module CP-L, round
221
Cable entry plates
216
Cable gland
220
Cable gland IW
222
Cable gland panels
– Metal
217
– Plastic
218
Cable tie fastener
221
Cable ties for quick assembly
220
Cable tube, flexible
227
Captive nuts M5 / M6
273
Cast cross member
135
Castors
210, 213, 250
Castors, adaptor
212
Clamp rails for cables
223
Clamp strip, foam rubber
217
Climate control
202
Clipboard
239
Comfort handle
244
Comfort handle for semi-cylinder
244
Command panel
– Sheet steel
68
– Stainless steel
76
– with display panel front
70
– with wide VIP 6000 frame
72
Command panel housing with door
– Sheet steel
66
– Stainless steel
74
Compact Panel
58
– Accessories for wall mounting
227
Component shelf, pull-out
257
Component shelf, static installation
256
Component shelves, locatable bracket 259
Conduit
– CP-L
102
– CP-S
88
– CP-S stainless steel
92
– CP-XL
120
Conduit holder
235
Connection cable for power pack
265
Connection console
– CP-L, rectangular
108
Connection cover
222
Connection plate
219
Connection section
– CP-L
102
– CP-S
88
– CP-S stainless steel
92
– CP-XL
120
Connector for compact enclosures
228
Connector gland
220
Connector grommets
216
Connector strips
269
Connector, enclosure surface
228
Consoles
182, 186 – 199
Contact washers
270
Control consoles
182 – 199
Control unit
135
Cooling unit
202
Corner handle
238
Cover plate
222
Cross member with cast feet
135

Desk section
– Stainless steel
– Steel
Desk units
Desktop keyboard IP 65
Door stay
Drawer
– for keyboards
– Tray
Drawer extension lock IW

234
211
257
227
247

231
231
231
187
264
250
257
231
257
258

E
Electric lifting pillar
134
Enclosure attachment
– CP-L, rectangular
106
– CP-L, rectangular, locatable
107
– CP-L, round
106
– CP-S stainless steel
93
– CP-XL, rectangular
122
– CP-XL, round
122
– Tilting, bottom-mounting CP-L,
rectangular
110
– Tilting, CP-S configuration
91
Enclosure connector, adjustable
226
Enclosure flange
218
Enclosure keys
249
Enclosure reinforcement
218
Enclosure surface connector
228, 262
Enclosure systems
– PC
170 – 181
Entry grommets for cables
216
Entry grommets for connectors
216
Entry plates for cables
216
Ergoform special
245
Ergoform standard
245
Extension lock for drawers
258
Extension piece
231
Extension piece, drawer tray
257
Externally mounted accessories,
assembly kit
135

F
Feet
– Height-adjustable
– Pedestal
Feet for monitor housing
Flat screen
Foam rubber cable clamp strip
Foot rest
Frame connector, adjustable
Front panels
– Aluminum
– Hinged

214
134
142
225
265
217
215
226
232
232
233

Systems for the human/machine interface

Index

G
Gas pressurised spring
Gland panels
– Metal
– Plastic
Grommets for
– Cable entry
– Connector gland
Ground straps
Grounding plate
Grounding rail, horizontal
(potential equalisation rail
Grounding strap

L
141
217
218
216
216
270
271
270
270

H

M

Handle adaptor
244
Handle frame for operating housing
239
Handle set
235
– for Optipanel
237
– for VIP 6000
236
Handles
235 – 239, 244 – 246
Handles, plastic
245
Height-adjustable pedestal
134
Hinge 180°
241
Hinge attachment
252
Holder for mouse
266
Housing coupling
– CP-L, rectangular
109
– CP-L, round
109
– CP-S
90
– CP-S stainless steel
93
– CP-XL
123

I
Industrial workstations
– Accessories
224 – 225
– Enclosures with door versions
156
– Enclosures with drawers
158
– Monitor housing
164
– Pedestal
162
– Technical details
166 – 169
– Worktop attachment
139
– Worktops
160
Inserts for lock
244, 246 – 247
Interfaces
– Box
240
– Flap
240
Intermediate hinge
– CP-L
114
– CP-XL
126

Systems for the human/machine interface

Metal gland panel
217
Mobile base on castors
212
Mobile pedestal
145
Mobile workstation
267
Mobile workstation, base
267
Modular base/plinth trim
210
Modular pedestal, small
144
Monitor housing, spacer plate
224
Monitor housing, stay
225
Monitor, flat
265
Monitor, support plate
224
Mounting angles, 482.6 mm (19″)
272
Mounting bracket/mounting panel
254
Mounting component
– CP-L for signal pillars
115
Mounting kit
233
Mounting panel, partial mounting panel 251
Mounting panels
253, 254
Mounting rails, 482.6 mm (19″)
272
Mouse holder
266
Mouse, mousepad IP 67
266
Mousepad support
266
Mousepad support, vertically hinged 262
Mousepad, passive
177
Multiple lock
248

N
Nuts

264
263
264
231
231
260
259
261

273

O
One-piece consoles
Optipanel support plate

K
Keyboard
– Desktop keyboard
– Pull-out
– Stainless steel
Keyboard drawer
– Sheet steel
– Stainless steel
– with mousepad support
Keyboard drawer 19″/2 U
Keyboard support

Levelling feet
214
– 100 mm high
214
Lifting pillar, electric
134
Light
268
Locatable bracket for shelves
259
Locating adaptor
219
Lock and push-button inserts
244
Lock cover
248
– for padlocks
248
Lock for drawer extension
258
Lock for support arm connection
222
Lock inserts
244, 246
Lock systems
244 – 249

184 – 199
109

P
Panel lift
Partial mounting panel TS
PC
– Base/plinth trim
– Enclosure systems
Pedestals
– Base plate
– Base plate, large

138
251
207
170 – 181
142, 187
141
146

– Base plate, small
– for IW worktops
– for operating housing
– height-adjustable
– Mini
– mobile
– modular, small
Pillar
– Lifting pillar, electric
– small
Plastic cable gland panels
Plastic handles
Plastic wiring plan pocket
Plate
– Grounding plate
Plate, base assembly
Plates for cable entry
Pocket
– for wiring plan, plastic
– for wiring plan, sheet steel
Pole clamp
Potential equalisation rails
Power pack for TFT monitor
Power strips
Premium Panel stainless steel
Printer trolley
Pull-out rails
Pull-out shelf

145
143
147
134
140
145
144
148
134
148 – 149
218
245
250
271
215
216
250
250
230
270
265
269
60 – 63
267
258
257

R
Rails
– Clamp rails for cables
223
– Earth rails
270
– Mounting angles, 482.6 mm (19″)
272
– Support rails
253
– Telescopic slides
258
Rear cooling panel, modular
204
Reinforcement bracket for TS base tray 213
Reinforcement for enclosure
218
Reinforcement plate
218
Retaining rails TS
253
Ride-up roller
250
Ring board
239
Roof plates TS
251
Rotation range limiter
126
– CP-XL
126
Rubber cable clamp strip
217

S
Safety cylinder inserts
247
Screen, flat
265
Screen, support plate
224
Screws
255, 273
Sealing bar
234
Self-tapping screws
255
Semi-cylinder lock
247
Sheet steel wiring plan pockets
250
Shelf, component shelf,
static installation
256
Spacer plate for monitor housing
224
Spacing and built-in trim panel
234
Spring nut M5
255
Stainless steel
– Base mount, swivel, CP-S
94
– Base/plinth, complete
209
– Command panel
76
– Command panel housing with door
74
– Enclosure attachment CP-S
93
– Enclosure coupling CP-S
93
– Enclosure reinforcement
218
277

Index
– Premium Panel
60 – 63
– Support section CP-S
92
– Tilting adaptor 10° CP-S
93
– Wall console CP-S
95
– Wall mounting bracket
229
– Wall/base mounting, rigid, CP-S
94
Stainless steel keyboard 19″
264
Stay
– for VIP 6000, hinged
249
Stay, door
250
Stays
– for door
250
– for Industrial workstations
258
– for monitor housing
225
Straps, ground straps
270
Support
– for keyboards
261
– for mousepad
266
– for mousepad, vertically hinged
262
Support arm bracket 90°
– CP-L
102
Support arm system
– CP-L
96 – 115
– CP-L, fast selection
98 – 99
– CP-S, fast selection
84 – 87
– CP-S, stainless steel
92 – 95
– CP-S, steel
88 – 91
– CP-XL
116 – 127
– CP-XL, fast selection
118 – 119
Support arm, height adjustable, CP-L 100
Support plate for screen
224
Support section
– CP-L
102
– CP-S
88
– CP-S stainless steel
92
– CP-XL, open
120
– CP-XL, solid
120
– height-adjustable
141
Surface connector for enclosures 228, 262
System chassis with mounting
flange TS, 17 x 73 mm
(0.67
 x 2.87
)
272
System light
268
System mounting block for AE
256

T
T handles
246
Telescopic slides
258
TFT monitor
265
Tilt adjustment
140
Tilting adaptor ± 45°
– CP-L, round
112
Top mounted joint
– CP-L
114
– CP-XL
125
Torx screws
255
– M5 x 16 mm/M6 x 16 mm (0.63
)
273
– M6 x 12 mm (0.47
)
255
Transport castors
210
Tray, drawer tray
257
Trim for base/plinth
207
Trim panel
186, 215
Trolley, mobile workstation
267
TS partial mounting panel
251
TS retaining rails
253
TS roof plate
251
TS system chassis with mounting
flange, 17 x 73 mm (0.67
 x 2.87
)
272
Tube
– CP-L
102
– CP-S
88
– CP-S stainless steel
92
– CP-XL
120

278

Turntable
Twin castors

225
213

U
U handle
Unit, control unit
Universal bracket
Universal enclosure key
Utility shelf CP

238
135
256
249
229

V
Viewing window
VIP small cooling unit

241
202

RAL colors
Color
RAL

W
Wall bracket
Wall console
– CP-S stainless steel
Wall mounted hinge
– CP-L
– CP-XL
Wall mounting bracket
Wall mounting bracket, vertically
hinged
Wall/base mounting
– CP-S
– CP-XL
– large, CP-L
– rigid, CP-S stainless steel
– small, CP-L
Wall-mounted cooling unit for VIP 6000
Washers, contact washers
Window
– Viewing window
Wiring plan pockets
– Plastic
– Sheet steel
Worktop attachment IW

Designation

3001

signal red

5002

ultramarine blue

5005

signal blue

5018

turquoise blue

227

7015

slate grey

89
122
105
94
105
202
270

7022

umber grey

7024

graphite grey

7030

stone grey

7032

pebble grey

7033

cement grey

7035

light grey

7044

silk grey

8019

grey brown

9005

jet black

9006

aluminum white

9011

graphite black

9017

traffic black

230
95
113
125
229

241
250
250
139

We reserve the right to further developments and technical modifications of our
products. Such modifications, along
with errors and printing errata, shall not
constitute grounds for compensation.
We refer customers to our Terms of Sale
and Delivery.

Systems for the human/machine interface

Order forms VIP 6000
Order forms Optipanel

Systems for the human/machine interface

279

❏ RFQ / ❏ Order

VIP 6000
Please copy this page and place it next
to the brochure, to make your selection
easier and faster.
Then fax the completed form to Rittal.
Fax #: 937-629-2815

From:
Name
Company
Address

Phone
E-mail

1. Select frame
The frame type is determined from
the Model No.
* Only possible wtih keyboard
housings 105 mm (4.13
), 44 mm
(1.73
) deep and support for
keyboards (see selection 4.1).

Wide
VIP 6000 frame

Combined
VIP 6000 frame*

0

6 3 9 2 .

1

0 9

Part No. CP
Operating housing

Narrow
VIP 6000 frame*

2

6 3 5 1 .

0 9

Part No. CP
Keyboard housing

2. Enter the panel dimensions
2.1 For operating housings CP 6392.X09
Please state the number of front panels/panels used, their
height (H) x width (W) x depth (D) and the manufacturer/model.

2.2 For keyboard housings CP 6351.X09
Please state the height (H) x width (W) x depth (D) of the
keyboard/panel or the manufacturer/model.

HxWxD

HxWxD

Manufacturer/model

Manufacturer/model

HxWxD

Manufacturer/model

HxWxD

4. Determine the design of the keyboard
housing

Manufacturer/model

Enter the code number for the required design,
see page 28 – 31.
4.1 4.2 4.3 4.4 4.5

3. Determine the design of the operating
housing.
Enter the code number for the required design,
see page 22 – 27.
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

❏ Other modifications as per enclosed sheet.
Annual volume
Purchase quantities

❏ RFQ / ❏ Order

Optipanel
Please copy this page and place it next
to the brochure, to make your selection
easier and faster.
Then fax the completed form to Rittal.
Fax #: 937-629-2815

From:
Name
Company
Address

Phone
E-mail

Operating/keyboard housing

Part No. CP

6 3 8 2 . 0 0 9

1. Enter the panel dimensions
1.1 For operating housings
Please state the number of front panels/panels used, their
height (H) x width (W) x depth (D) and the manufacturer/model.

1.2 For keyboard housings
Please state the height (H) x width (W) x depth (D) of the
keyboard/panel or the manufacturer/model.

HxWxD

HxWxD

Manufacturer/model

Manufacturer/model

HxWxD

Manufacturer/model

Standard dimensions for front panel H x W:
● 7 U x 19

● 234 mm (9.21
) x 270 mm (10.63
)
see page 52.

HxWxD

Manufacturer/model

2. Determine the design of the operating/
keyboard housing
Enter the code number for the required design,
see page 46 – 51.
2.1 2.2 2.3 2.4 2.5

❏ Other modifications as per enclosed sheet.
Annual volume
Purchase quantities

Industrial enclosures

Electronic packaging

Systems for the human/machine interface

Global Rittal. Worldwide service.
Small enclosures
Compact enclosures
Large enclosures
PC enclosures and case systems
Console systems
Industrial workstations
Command Panel systems
Stainless steel enclosures and support arm
systems
EMC-shielded enclosures
Ex enclosures

System climate control

Systems
for the
human/
machine
interface
Command Panel
Industrial workstations
PC enclosures
Console systems

Power distribution

IT solutions

Rittal Corporation
One Rittal Place
Springfield, OH 45504
Phone: (937) 399-0500
Fax: (937) 390-5599
Toll-free: 1-800-477-4000
www.rittal-corp.com
Email: rittal@rittal-corp.com

08/04 䡠 A141

Communication systems

R

R



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2004:09:08 10:43:46Z
Modify Date                     : 2005:01:24 10:27:38-08:00
Metadata Date                   : 2005:01:24 10:27:38-08:00
Creator Tool                    : FrameMaker 6.0
Format                          : application/pdf
Creator                         : Rittal Corporation
Title                           : Rittal Systems for the Human/Machine Interface
Document ID                     : uuid:ecdeba32-fe5b-43de-827b-4877a9a67aaa
Instance ID                     : uuid:7f41729f-07fc-4f87-9ad7-81f8bc476ed4
Has XFA                         : No
Page Count                      : 282
Page Layout                     : SinglePage
Author                          : Rittal Corporation

EXIF Metadata provided by EXIF.tools