Schneider Electric DIGEST 175 NEMA Definite Purpose Type Contactors And Starters 111817 Catalog
119366-Catalog 119366-Catalog 119366-Catalog 785901 Batch10 unilog cesco-content
106294-Catalog 106294-Catalog 106294-Catalog 785901 Batch10 unilog cesco-content
121149-Catalog 121149-Catalog 121149-Catalog 785901 Batch10 unilog cesco-content
111910-Attachment 111910-Attachment 111910-Attachment 785901 Batch10 unilog cesco-content
97744-Catalog 97744-Catalog 97744-Catalog 785901 Batch10 unilog cesco-content
2014-10-17
: Pdf 111817-Catalog 111817-Catalog 785901 Batch10 unilog
Open the PDF directly: View PDF .
Page Count: 148
Download | |
Open PDF In Browser | View PDF |
Table of Contents Section 16 NEMA Contactors and Starters NEMA AC Magnetic Contactors and Starter/Catalog Numbering System 16-12 Combination Starters—NEMA Rated Manual Starters and Switches (p. 16-2) Definite Purpose Contactors and Starters (p. 16-76) Non-Reversing Non-Fusible Disconnect Class 8538 Fusible Disconnect Class 8538 Mag-Gard® Circuit Breaker Class 8539 Thermal Magnetic Circuit Breaker Class 8539 Reversing Non-Fusible Disconnect Class 8738 Fusible Disconnect Class 8738, 8739 Mag-Gard Circuit Breaker Class 8739 Thermal Magnetic Circuit Breaker Class 8739 16-31, 16-33 16-30, 16-32, 16-33 16-34, 16-35, 16-36 16-37, 16-38 16-51 16-50, 16-51 16-52 16-54 Contactors—NEMA Rated Non-Reversing Class 8502 Reversing Class 8702 TeSys U Simple Motor Starter Vacuum, Low Voltage, Non-Reversing Class 8502 Vacuum, Low Voltage, Reversing Class 8702 NEMA Rated Type S Contactors and Starters (p. 16-13) Definite Purpose Contactors and Starters 16-13 16-43 16-11 16-27 16-49 16-76, 16-88 Class 8910, 8965 Duplex Motor Starters Class 8941 Lighting Contactors (p. 16-64) 16-85 Enclosures Class 9991 16-102 External Reset Mechanisms Class 9065 16-101 Factory Modifications (Forms) 16-109 Lighting Contactors Class 8903 Manual Starters and Switches Class 2510, 2511, 2512 Multispeed Starters Class 8810 16-64 16-2 16-58 Overload Relays Pump Panel (p. 16-81) Combination Starters (p. 16-30) Bimetallic Class 9065 Melting Alloy Class 9065 Motor Logic/Motor Logic Plus Class 9065 TeSys T Motor Management System 16-98 16-90 16-91 16-92 Pump Panels Full Voltage Class 8940 16-81 Electro-Mechanical Class 8600 See Supplemental Digest Starters, Full Voltage—NEMA Rated Non-Reversing Class 8536 Reversing Class 8736 Vacuum, Low Voltage, Non-Reversing Class 8536 16-17 16-45 16-29 Additional Products Accessories Class 9998, 9999 Renewal Parts Class 9998 Thermal Units Reversing Drum Switches Class 2601 16-117 16-114 16-125 16-10 16 Electro-Mechanical Reduced Voltage Starter (see Supplemental Digest) NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Reduced Voltage Starters © 2009 Schneider Electric All Rights Reserved 16-1 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters Type F—Fractional Horsepower Class 2510, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us Fractional Horsepower Manual Starters with Melting Alloy Type Thermal Overload Relay Type of Operator Table 16.1: Single-Unit Types—Class 2510—Rated 16 A — Thermal Units Prices shown do not include thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA 1 General Purpose Enclosure Surface Mounting No. of Poles General Purpose Flush Mounting (Without Pull Box) Features Standard Type Gray Flush Plate Oversized $ Price Type Standard Stainless Steel Flush Plate $ Price Type $ Price Type NEMA Type 4a Watertight and Dusttight Enclosure Jumbo Stainless Steel Flush Plate $ Price Type $ Price Type $ Price NEMA Types 3R, 7 & 9 Hazardous Locations Div. 1 & 2 Class I Groups B, C, & D & Class II Groups E, F & G Enclosure Type $ Price Type Basic Starter—Class 2510 Standard FG1 86.00 FGJ1 99.00 FF1 78.00 FS1 83.00 — — — — — — FO1 1 With Red Pilot Lightc FG1P 129.00 FGJ1P 143.00 FF1P 122.00 FS1P 129.00 FSJ1P 149.00 — — — — FO1P Toggle 99.00 — — — — — — FO2 Standard FG2 99.00 FGJ2 116.00 FF2 93.00 FS2 2 — — — — FO2P With Red Pilot Lightc FG2P 143.00 FGJ2P 158.00 FF2P 120.00 FS2P 143.00 FSJ2P 165.00 Standard FG3 116.00 FGJ3 129.00 FF3 107.00 FS3 114.00 — — — — — — FO3 1 With Red Pilot Lightc FG3P 158.00 FGJ3P 171.00 FF3P 149.00 FS3P 158.00 FSJ3P 179.00 — — — — FO3P Key Standard FG4 129.00 FGJ4 143.00 FF4 122.00 FS4 129.00 — — — — — — FO4 2 With Red Pilot Lightc FG4P 171.00 FGJ4P 185.00 FF4P 165.00 FS4P 171.00 FSJ4P 192.00 — — — — FO4P Starter with Handle Guard/Lock-Off—Class 2510 Standard FG5 99.00 FGJ5 114.00 FW1 320.00 FR1 350.00 1 b With Red Pilot Light c FG5P 143.00 FGJ5P 158.00 FW1P 435.00 — — Order basic starter plus Toggle separate handle guard kit. Standard FG6 116.00 FGJ6 129.00 FW2 336.00 FR2 363.00 2 b With Red Pilot Lightc FG6P 158.00 FGJ6P 171.00 FW2P 449.00 — — a Furnished with one 3/4" pipe tap in bottom (reversible for top feed). To obtain 3/4" pipe tap top and bottom, add suffix letter “H” to type number and add $19.10 to price. b For replacement starter, order open type above. For NEMA 4 with pilot light, retain pilot light mounting bracket from original device. Table 16.2: Type of Operator Number of Thermal Units Required Open Type $ Price 71.00 116.00 86.00 129.00 99.00 143.00 114.00 158.00 1 1 1 1 — — — — 1 1 Duplex Units—Class 2510 No. of Poles NEMA 1 General Purpose Enclosure Surface Mounting Features One Starter in Duplex Enclosure—Class 2510 Standard Toggle 2 With Red Pilot Light c Key 2 With Red Pilot Light c Two Starters in One Enclosure—Class 2510 2 Standard Toggle Each Str. With Red Pilot Light on Eachc Key 2 Ea. Str. With Red Pilot Light on Eachc Starter and “AUTO-OFF-HAND” SPDT Selector Switch (AC Only)—Class 2510 Standard 1 With Red Pilot Light c Toggle Standard 2 With Red Pilot Lightc Key 2 With Red Pilot Lightc General Purpose Flush Mounting (Without Pull Box) Gray Flush Plate for Wall or Cavity Mounting $ Price Stainless Steel Flush Plate for Wall or Cavity Mounting Type $ Price Type FG02 FG02P FG04P 158.00 201.00 201.00 — — — FG22 FG22P FG44P 243.00 399.00 458.00 FF22 FF22P FF44P 228.00 386.00 441.00 — FS22P FS44P FG71 FG71P FG72 FG72P FG74P 221.00 264.00 234.00 278.00 306.00 FF71 FF71P FF72 FF72P FF74P 207.00 251.00 221.00 264.00 293.00 — FS71P — FS72P FS74P FG11 FG11P 314.00 471.00 FF11 FF11P 300.00 458.00 — — — — — Type — — — $ Price — — — With Mechanical Interlock: Standard With 2 Red Pilot Lightsc With HIGH-OFF-LOW Selector Switch: With 2 Red Pilot Lightsc Toggle With Mechanical Interlock: Standard 2 With 2 Red Pilot Lightsc With HIGH-OFF-LOW Selector Switch: With 2 Red Pilot Lightsc c For green pilot light, add the letter “G” to the catalog number (i.e. 2510FG2PG). Table 16.3: — FG22 FG22P — — 342.00 500.00 — — FF22 FF22P — — 329.00 485.00 — FS101P — — FS202P Type Number of Thermal Units Required $ Price — — — — — — 1 — 399.00 458.00 — — — — — — 2 — 264.00 — 278.00 306.00 — — — — — Two Speed Starters (AC Only)—Class 2512 1 Replacement Starter Class 2510 — — 471.00 — — 500.00 1 2 — 1 — — 1 — — 1 Replacement Starter Class 2510 FO1T FO1PT 86.00 129.00 FO1PT 129.00 FO2T FO2PT 99.00 143.00 FO2PT 143.00 2 2 Horsepower Ratings Type F 16 Maximum Horsepower Volts AC Single Phase NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 1-Pole 2-Pole DC 2-Pole Only 115–230 1 1 3/4 277 1 1 — Note: Continuous current rating—16 A. Table 16.4: Approvals—2510 Type F and K Enclosed Open (UL Listed) File E42243 (UL Component Recognized) CCN NLRV CSA Certified File LR25490 Class 3211-05 Type FG2P Table 16.5: 16-2 Class Number Type Number Type FO2 How to Order To Order Specify: • • File E42243 CCN NLRV2 Catalog Number Class Type 2510 FG1 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Switches 30 A, Reversing, Non-Reversing, Two Speed—Type K Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us 000 No. of Poles Non-Reversing—Class 2510 NEMA 1 General Purpose Enclosure Surface Mounting General Purpose Flush Mounting (Without Pull Box) Features Standard Standard Stainless Steel Flush Plate Gray Flush Plate Oversized NEMA Types 3R, 7 & 9 a Hazardous Locations Div. 1 & 2 Class I Groups B, C & D & Class II Groups E, F, and G Enclosure NEMA Type 4 a Watertight and Dusttight Enclosure Jumbo Stainless Steel Flush Plate Open Type Type $ Price Type $ Price Type $ Price Type $ Price Type $ Price Type $ Price Type $ Price Standard KG1 66.00 KGJ1 81.00 KF1 59.00 KS1 66.00 — — KW1 314.00 KR1 342.00 With Pilot Lightc 2 115 Vac KG1A 138.00 KGJ1A 153.00 KF1A 131.00 KS1A 138.00 KSJ1A 161.00 KW1A 428.00 — — 230 Vac KG1B 138.00 KGJ1B 153.00 KF1B 131.00 KS1B 138.00 KSJ1B 161.00 KW1B 428.00 — — Standard KG2 149.00 KGJ2 165.00 KF2 143.00 KS2 149.00 — — KW2 386.00 KR2 442.00 With Pilot Lightc 3 208-277 Vac KG2B 221.00 KGJ2B 234.00 KF2B 215.00 KS2B 221.00 KSJ2B 243.00 KW2B 500.00 — — 440-600 Vac KG2C 221.00 KGJ2C 234.00 KF2C 215.00 KS2C 221.00 KSJ2C 243.00 KW2C 500.00 — — Toggle Standard KG5 78.00 KGJ5 93.00 — — — — — — KW5 327.00 — — With Pilot Lightc — 2 115 Vac KG5A 149.00 — — — — — — — — KW5A 440.00 — — 230 Vac KG5B 149.00 — — — — — — — — KW5B 440.00 — — Standard KG6 162.00 KGJ6 176.00 — — — — — — KW6 396.00 — — With Pilot Lightc 3 208-277 Vac KG6B 233.00 — — — — — — — — KW6B 512.00 — — 440-600 Vac KG6C 233.00 — — — — — — — — KW6C 512.00 — — Standard KG3 95.00 KGJ3 110.00 KF3 89.00 KS3 95.00 — — — — — With Pilot Lightc 2 115 Vac KG3A 167.00 KGJ3A 179.00 KF3A 161.00 KS3A 167.00 KSJ3A 185.00 — — — 230 Vac KG3B 167.00 KGJ3B 179.00 KF3B 161.00 KS3B 167.00 KSJ3B 185.00 — — — — Key Standard KG4 179.00 KGJ4 192.00 KF4 171.00 KS4 179.00 — — — — — — With Pilot Lightc 3 208-277 Vac KG4B 251.00 KGJ4B 264.00 KF4B 243.00 KS4B 251.00 KSJ4B 270.00 — — — — 440-600 Vac KG4C 251.00 KGJ4C 264.00 KF4C 243.00 KS4C 251.00 KSJ4C 270.00 — — — — a Furnished with one 3/4" pipe tap in bottom (reversible for top feed). To obtain 3/4" pipe tap top and bottom, add suffix letter “H” to type number and add $28.70 to price. b When replacing starter with pilot light in NEMA 4 enclosure, retain pilot light mounting bracket from original device. Table 16.7: Type of Operator Type of Operator No. of Poles Motor Types for Which Suitable 2 Single Ø 3-Lead Repulsion-Induction 3 Three Ø; Also Single Ø Capacitor, Split Ø, or 4-Lead Repulsion-Induction NEMA 1 General Purpose Enclosure Surface Mounting Features (Including Mechanical Interlock) Standard With Pilot Light:c 115 Vac 230 Vac Standard With Pilot Light:c 110–120 Vac 208–220 Vac 440–600 Vac KO1A b KO1B b KO2 125.00 125.00 120.00 KO2B b KO2C b KO5 207.00 207.00 64.00 KO5Ab KO5Bb KO6 120.00 120.00 147.00 KO6Bb KO6Cb KO3 219.00 219.00 81.00 KO3A KO3B KO4 153.00 153.00 165.00 KO4B KO4C 234.00 234.00 With Flush Plate for Cavity Mounting (Without Pull Box) Replacement Switch Class 2510 Type KG11 $ Price 287.00 Type KF11 $ Price 270.00 Type KO1T $ Price 66.50 KG11A KG11B KG22 399.00 399.00 441.00 KF11A KF11B KF22 386.00 386.00 428.00 KO1AT KO1BT KO2T 138.00 138.00 149.00 KG22A KG22B KG22C 557.00 557.00 557.00 KF22A KF22B KF22C 543.00 543.00 543.00 KO2AT KO2BT KO2CT 221.00 221.00 221.00 Two Speed—Class 2512 No. of Poles NEMA 1 General Purpose Enclosure Surface Mounting Features (Including Mechanical Interlock) Motor Types for Which Suitable Standard With 2 Pilot Lights:c 2 115 Vac 230 Vac Toggle Standard Three Ø With 2 Pilot Lightsc: 3 Separate Winding 208–240 Vac (Wye-Connected) 440–600 Vac For green pilot light, add the letter “G” to the catalog number (i.e. 2510KW2CG). Single Ø Two Winding (3-Lead) c $ Price 52.00 Reversing—Class 2511 Toggle Table 16.8: Type KO1 Table 16.9: Class 2510 Horsepower Ratings Class 2510 No. of Poles Motor Type AC KO1 KO3 2 Single Ø Maximum Hp 2 2 3 3 1 3 Three Ø 2 7-1/2 10 10 1 2 1-1/2 KO5 2 Single Ø 2 3 7-1/2 10 1 2 1-1/2 3 Three Ø 2 7-1/2 15 20 1 2 Note: Continuous current rating 30 A at 600 Vac maximum. Table 16.10: How to Order To Order Specify: Class Number Type Number $ Price 270.00 Type KO1T $ Price 66.50 KG11A KG11B KG22 513.00 513.00 441.00 KF11A KF11B KF22 500.00 500.00 428.00 KO1AT KO1BT KO2T 138.00 138.00 152.00 KG22B KG22C 671.00 671.00 KF22B KF22C 656.00 656.00 KO2BT KO2CT 221.00 221.00 Device 1-1/2 Class 2511 Class 2512 Class 2511 and 2512 Horsepower Ratings Type K Maximum Hp DC Ratings No. of Poles Motor Type AC 2 Single Ø 2 2 3 1 2 1-1/2 3 Three Ø 2 7-1/2 10 1 2 1-1/2 2 Single Ø 2 2 3 1 2 1-1/2 2 7-1/2 10 1 2 1-1/2 2 7-1/2 10 1 2 1-1/2 3 3 3 Ø, Constant or Variable Torque 3 Ø, Constant Horsepower 115 230 460–575 90 115 230 Volts Volts Volts Volts Volts Volts Catalog Number Class Type 2510 KO2 16 • • Type KF11 1-1/2 KO2 KO4 KO6 $ Price 287.00 Table 16.11: 2 Replacement Switch Class 2510 Type KG11 DC Rating 115 230 460 575 90 115 230 Volts Volts Volts Volts Volts Volts Volts With Flush Plate for Cavity Mounting (Without Pull Box) NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Type of Operator Table 16.6: © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-3 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters and Switches Type F and K—Approximate Dimensions Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us Open Type NEMA 1 General Purpose Enclosure (Flush Mount) MTG. HOLES FOR #6-32 SCREWS (2) PILOT LIGHT MTG. HOLES FOR #6-32 SCREWS (2) PILOT LIGHT 1.69 .84 43 21 OFF OFF 1.69 43 .84 21 OFF 2.38 3.28 60 83 4.13 105 2.38 60 3.28 83 4.13 105 2.34 1.7060 2.22 56 1.59 40 B 43 A Types KO1, 1A, 1B, 2, 2B, 2C Types KO5, 5A, 5B, 6, 6B, 6C Motor Starting Switch Types FO1, 1P, 2 Fractional Hp Starter PILOT LIGHT Table 16.13: Device Type of Operator (2) .22 DIA. MTG. HOLE 6 Toggle PILOT LIGHT ON OFF Fractional Hp Starter 3.75 95 Key 4.38 111 1.13 .31 29 8 CONDUIT CENTER LINE .28 DIA. PADLOCK HOLE 7 3" 14 PIPE TAP 4 Toggle .78 20 Motor Starting Switch Table 16.12: Key Device Fractional Hp Starter Motor Starting Switch Class 2510 2510 .50 13 .66 17 1.69 43 4.56 116 4.25 108 3 76 2.75 1.13 70 29 1.78 45 D .75 .91 19 23 NEMA 4 Watertight Die Cast Zinc Enclosure .25 6 2.56 65 C D Type FW1, 1P, 2, 2P KW1, 1A, 1B, 2, 2B, 2C Dimensions Class 2510 Type A B C FF1, 1P, 2, 2P FS1, 1P, 2, 2P 1-7/16 2-3/4 4-1/2 FSJ1P, 2P 1-7/16 3-1/2 5-1/4 FF3, 3P, 4, 4P FS3, 3P, 4, 4P 1-7/16 2-3/4 4-1/2 FSJ3P, 4P 1-7/16 3-1/2 5-1/4 KF1, 1A, 1B, 2, 2B, 2C KS1, 1A, 1B, 2, 2B, 2C 1-3/4 2-3/4 4-1/2 KSJ1A, 1B, 2B, 2C 1-3/4 3-1/2 5-1/4 KF3, 3A, 3B, 4, 4B, 4C KS3, 3A, 3B, 4, 4B, 4C 1-3/4 2-3/4 4-1/2 KSJ3A, 3B, 4B, 4C 1-3/4 3-1/2 5-1/4 NEMA 1 General Purpose Enclosure (Surface Mount) Mtg. Holes .25 dia. (2) 6 3.00 76 OFF Mtg. Holes .25 dia. (2) 6 4.25 108 3.00 76 OFF 4.25 108 4.86 123 1.63 41 2.44 62 2.75 70 2.88 73 Pilot Light 1.63 41 2.88 73 2.75 70 2.88 73 16 0.56 14 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 1/2-3/4" Conduit Knockout, Both Ends Standard (Class 2510 Types FG & KG, Single Unit) 16-4 4.35 110 OFF 0.69 17 1.06 27 3.28 83 Pilot Light 0.56 14 0.41 10 0.71 18 2.20 56 1.06 27 1/2-3/4" Conduit Knockout, Both Ends Oversized (Class 2510 Types FGJ & KGJ, Single Unit) Pilot Light 3.09 78 Jumbo (Class 9991 Type KE2; see page 16-9) © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters and Switches Approximate Dimensions—Type F and K Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us NEMA 3R, 7, and 9 Aluminum Enclosure for Hazardous Locations 3.95 100 2X .30 8 1.37 35 4.35 110 OFF OFF C 2.56 65 6.36 161 ON PILOT LIGHT A 5.75 146 OFF .75 19 .91 23 D .28 PADLOCK HOLE 7 CONDUIT CENTERLINE 2X .31 MTG. HOLES 8 Table 16.14: 1.37 35 3/4-14 PIPE TAP, BOTTOM ONLY .70 18 1.19 30 NEMA 3R, 7, and 9 Aluminum Enclosure for Hazardous Locations Device Class 2510 2510 Fractional Hp Starter Motor Starting Switch Type FR1, 2 KR1, 2 Key .25 DIA. MTG. HOLES 6 OFF .38 10 1.88 48 1.88 4.50 48 114 Dimensionsc Class 3.00 76 4.25 108 .56 14 2.56 65 2.63 67 3.81 97 Type A B C D FF22, 22P 5-1/4 3-3/4 5-1/4 1-7/16 FS22P 4-9/16 3-1/2 4-1/2 1-7/16 FF44P 5-1/4 3-3/4 5-1/4 1-7/16 FS44P 4-9/16 3-1/2 4-1/2 1-7/16 2510 2510 FF71, 71P, 72, 72P 5-1/4 5-1/4 2 FS71P, 72P 4-9/16 3-1/2 4-1/2 2 FF74P 5-1/4 3-3/4 5-1/4 2 FS74P 4-9/16 3-1/2 4-1/2 2 KF11, 11A, 11B KF22, 22A KF22B, 22C 5-1/4 3-3/4 5-1/4 1-3/4 Two Speed Toggle 2512 FF11, 11P, 22, 22P 5-1/4 3-3/4 5-1/4 Starter Two Speed KF11, 11A, 11B, Toggle 2512 5-1/4 3-3/4 5-1/4 Switch KF22, 22B, 22C c Dimensions include factory wired power connections. d Selector Switch is on left, extends 1-5/8" from mounting surface. 1-7/16 One Starter and One Selector Switchd Reversing Switch 2.75 70 2.88 73 Type of Operator Two Starters PILOT LIGHT OFF Device General Purpose Flush Mounting Plate for Duplex Devices Toggle Dimensions for Duplex Devices (4) Table 16.16: B Toggle Key Toggle 3/4 2510 2510 2511 1-3/4 1.06 27 1/2 - 3/4 CONDUIT KNOCKOUT, BOTH ENDS. Table 16.15: NEMA 1 General Purpose Surface Mount Enclosure for Duplex Devices Type of Class Type Operator Toggle 2510 FGO2, 02P One Starter Key 2510 FGO4P Toggle 2510 FG22, 22P Two Starters Key 2510 FG44P Toggle 2510 FG71, 71P, 72, 72P One Str. and One Sel. Sw. a Key 2510 FG74P Reversing Switchb Toggle 2511 KG11, 11A, 11B, 22, 22A, 22B, 22C Two Speed Starter Toggle 2512 FG11, 11P, 22, 22P Two Speed Switch Toggle 2512 KG11, 11A, 11B, 22, 22B, 22C a Selector switch is on left, increases overall depth to 3-1/2". b Only one pilot light (located on right) is used on Class 2511 switches. 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Device © 2009 Schneider Electric All Rights Reserved 16-5 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters Type M and T—Integral Horsepower Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us Types M and T integral horsepower manual starters provide convenient “On-Off” operation of small single phase, polyphase or DC motors. Typical applications include small machine tools, pumps, fans and conveyors. • • • Push button (M) or toggle (T) operators Reliable overload protection Pilot light and auxiliary contact available Table 16.17: Integral Horsepower Manual Starters Note that the prices shown do not include thermal units. Standard trip thermal units are $21.50 each; see page 16-125 for selection information. Non-Reversing No. of Poles 2Pole NEMA Size $ Price M-0 115 230 — — 1 2 MBG1 TBG1 264.00 MBW11b 720.00 MBW1b 720.00 M-1 115 230 — — 2 3 MCG1 TCG1 336.00 MCW11 891.00 MCW1 891.00 MCR1 1197.00 M-1P 115 230 — — 3 5 MCG2 TCG2 491.00 MCW12 1089.00 MCW2 1089.00 MCR2 1382.00 115 200-230 380-575 115 200-230 380-575 — 3 5 — 7-1/2 10 — — — — — — MBG2 TBG2 314.00 MBW12b 770.00 MBW2b 770.00 MBR2b MCG3 TCG3 386.00 MCW13 941.00 MCW3 941.00 M-1 b Square Toggle P.B. Operator Operator a NEMA 4/4X NEMA 7 & 9 Watertight, For Hazardous Dusttight and Class I Corrosion-Resistant Locations – Groups C, D Glass-Polyester Class II – Enclosure Groups E, F & G Single Phase M-0 a Max. Hp Max. Voltage: 600 Vac NEMA 4/4X Watertight and Dusttight Enclosure Brushed Stainless Steel PolyPhase 3Pole DC 2Pole Motor Voltage Class 2510 NEMA 1 Surface Mounting Ratings Type Type $ Price Type $ Price Type $ Price NEMA 12 Dusttight and Driptight Industrial Use Enclosure Type MBR1b 1004.00 MBA1b $ Price Open Type Square Toggle P.B. Operator Operator $ Price Type 363.00 MBO1 TBO1 234.00 MCA1 435.00 MCO1 TCO1 306.00 MCA2 593.00 MCO2 TCO2 309.00 1062.00 MBA2b 414.00 MBO2 TBO2 287.00 MCR3 1254.00 MCA3 485.00 MCO3 TCO3 356.00 M-0 115 230 1 hp–D.C. 1-1/2 hp–D.C. MBG4 TBG4 264.00 MBW14 720.00 MBW4 720.00 — — MBA4 363.00 MBO4 TBO4 234.00 M-1 115 230 1-1/2 hp–D.C 2 hp–D.C. MCG5 TCG5 336.00 MCW15 891.00 MCW5 891.00 MCR5 1188.00 MCA5 435.00 MCO5 TCO5 306.00 NEMA 7 & 9 enclosures are cast-iron. NEMA 7 & 9 enclosures (cast aluminum) are available for outdoor use; to order these type of enclosures, replace the “R” in the catalog number with a “T”. For additional information, contact your local Square D Field Sales Office. Approved for group motor installations per NEC 430-53(c). All Except NEMA 7 & 9 File E42243 CCN NLRV File LR60905 Class 3211-05 NEMA 7 & 9 Only Table 16.18: File E58760 CCN NPXZ File LR26817 Class 3218-04 How to Order To Order Specify: • • Class Number Type Number Catalog Number Class Type 2510 MCA1 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-6 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters Integral Horsepower—Type M and T Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us Reversing and Two Speed Class 2511 reversing and Class 2512 two-speed manual starters consist of two mechanically interlocked Class 2510 Types M or T manual starters. . Class Reversing Class 2511 Description No. of Poles NEMA 1 Surface Mounting Ratings NEMA Size Motor Voltage Maximum Hp 200-230 3 380-575 5 200-230 7-1/2 380-575 10 M-0 2511 Standard Toggle Operator MBG1 MCG1 Description No. of Poles NEMA Size Motor Voltage Constant Hp Constant Torque or Variable Torque 200-230 2 3 380-575 3 5 Standard M-1 MBO1 TBO1 899.00 TCG1 1197.00 MCO1 TCO1 1112.00 200-230 5 7-1/2 380-575 7-1/2 10 Open Type $ Price Square P.B. Operator Toggle Operator $ Price MBG1 TBG1 984.00 MBO1 TBO1 899.00 MCG1 TCG1 1197.00 MCO1 TCO1 1112.00 Starters will not operate without properly installed thermal units and device reset. Thermal unit must be installed so that markings face the front of starter. Operator–Available with a push button or toggle operator in open and NEMA 1 versions. NEMA 4/4X (stainless) & 12 versions utilize a direct acting push button only. NEMA 4/4X (polyester) & 7/9 versions utilize an external toggle to actuate a push button device inside. Application Data Maintenance of Equipment For proper performance, all equipment should be periodically inspected and maintained. Replacement contacts and interlocks are available in kit form to facilitate servicing and stocking. In addition, the service bulletin contains an exploded view of the device with components clearly marked for easy identification by description and part number. Mechanism Lock Off–Both open devices and starters in NEMA 1 surface and flush mounting, and NEMA 4, 4X, 7 & 9 and 12 enclosures can be locked in the OFF or STOP position. The NEMA 1 surface mounting, 4, 4X, 7 & 9 and 12 enclosures can also be locked closed to prevent unauthorized entry. Terminal information and Replacement Contact Kits Power Terminals M-1P 984.00 Toggle Operator Size–Available in NEMA Sizes M-0, M-1, and M-1P. Poles–Two poles single phase; three poles polyphase; 2 poles DC. Voltage–600 volts AC max.; 250 volts DC max. Overload Relays–Melting alloy thermal overload relays have provisions for one Type B thermal unit for single phase starters and three Type B thermal units for three phase starters. All thermal units must be installed and the device reset before the starter contacts will operate. After overload relays have tripped, allow one or two minutes for the alloy to solidify before resetting. M-0 TBG1 Square P.B. Operator Thermal Units NEMA Size $ Price 3-Pole M-1 Table 16.21: Toggle Operator NEMA 1 Surface Mounting M-0 2512 $ Price Two Speed (Wye-Connected Separate Winding Motors Only) Class 2512 Ratings Class Open Type Square P.B. Operator 3-Pole M-1 Table 16.20: Square P.B. Operator Type of Lug Pressure Wire Pressure Wire Box Lug Wire Size (Solid or Stranded Copper Wire) Min.-Max. #14–#8 #14–#8 #14–#6 Auxiliary Interlock Terminals Type of Lug Replacement Contact Kit Wire Size (Solid or Stranded Copper Wire) Min.-Max. No. of Poles Service Bulletin Class Type #16–#12 2 or 3 312AS 9998 ML1 #16–#12 2 or 3 312AS 9998 ML2 #16–#12 2 312AS 9998 ML2 Pressure Wire Pressure Wire Pressure Wire Accessories and Modification Kits 16 One auxiliary contact, either N.O. or N.C. can easily be added internally to any open or enclosed Type M or T manual starter. It occupies the space provided in either the upper right hand or left hand corners of the device. These contacts are for AC loads only. For electrical ratings refer to page 16-119, Class 9999 Types SX11 or SX12. A unique red pilot light assembly that clips into place is available factory installed on NEMA 1, 4, 4X, 12 and flush enclosures or as a field modification kit on the NEMA 1 surface or flush mounting enclosures. See page 16-9. The color cap assembly snaps into a knockout in the enclosure cover on the NEMA 1 enclosures. Pilot light kits are available for use on Various voltages (110-600 volts). Pilot light assemblies are not available for NEMA 7 & 9 enclosures. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.19: © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-7 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters Type M and T—Integral Horsepower—Approximate Dimensions Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us .28 3.50 1.75 89 4.03 7 102 44 1.25 32 START 5.13 130 STOP 5.72 RESET 1.13 145 29 .69 29 NEMA 12 Dusttight and Driptight Industrial Use NEMA 4/4X Watertight and Dusttight Stainless Steel NEMA 1 General Purpose Surface Mounting 11 Reset 3.97 101 Class 2510 Type M Sizes M-0, M-1 and M-1P, Open Type Approximate Shipping Weight—3 lbs. .22 (3) .5 -.75 K.O. Top and Bottom .28 Dia. Mtg. Holes START .44 Travel to Prov. for (3) #10 Mounting Screws 1.13 18 6 START STOP STOP RESET RESET 9.34 237 4.25 108 7.88 200 1.69 .75 7.25 184 8.94 227 .22 2.13 3.38 .94 1.69 24 .22 .88 86 22 54 5.00 6 21 27 1.06 5.78 99 29 STOP RESET .50 - .75 K.O. (2) Each Side 254 273 10.92 10.00 STOP RESET 5.75 RESET 12 10.75 START .50 - .75 K.O. Each Side 219 STOP .22 Dia. (4) Mounting Holes 8.13 207 .22 Dia. (3) Mounting Holes 8.63 START .47 .31 Dia. (2) Mounting Holes 25 START 33 10 83 1.14 1.00 10.00 1.31 .38 3.25 32 26 .75 Conduit Hub Top and Bottom 147 1.27 1.02 27 .50 - .75 K.O. (2) Top Back 1.28 33 86 3.91 6 1.06 127 43 19 .84 Classes 2511, 2512, Types M & T Sizes M-0 and M-1 NEMA 1 General Purpose Enclosure Approximate Shipping Weight—9 lbs. NEMA 7 & 9 Hazardous Locations Cast Iron NEMA 4/4X Watertight, Dusttight and Corrosion Resistant Glass Polyester 43 3.38 277 254 146 1.44 1.00 .94 25 1.00 4.13 24 37 1.00 25 25 105 (1) .50 - .75 K.O. (2) .75 - 1.00 K.O. Top and Bottom 6.00 152 27 6.50 .75 19 1.28 33 1.69 152 .66 .34 9 4.69 17 119 6.13 156 43 16 R E ON S E T OFF 146 6.00 163 19 127 5.76 Class 2510 Type M Sizes M-0, M-1 and M-1P NEMA 4/4X Watertight Stainless Steel Enclosure NEMA 12 Dusttight Industrial Use Enclosure Approximate Shipping Weight—9 lbs. 6.41 .75 165 5.00 (2) .31 Wide Slots NEMA 4 Only 73 26 Class 2510 Types M & T Sizes M-0 and M-1 NEMA 1 General Purpose Enclosure Approximate Shipping Weight—5 lbs. 5.78 147 5.00 2.89 1.02 (2) .50 - .75 K.O. Top and Bottom 76 127 1.06 Class 2510 Type M & T Size M-1P NEMA 1 General Purpose Enclosure Approximate Shipping Weight—5 lbs. 3.00 8.75 222 R ON E S E T OFF 7.31 10.34 186 263 R ON E S E T 8.75 222 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS (2) .31 Dia. Mtg. Holes OFF 10.50 267 9.94 252 12.13 308 (2) .31 Dia. Mtg. Holes .72 18 3.69 94 5.13 130 .72 18 .81 21 .75 Conduit Hub Top and Bottom 36 Class 2510 Type M Size M-0 (AC–DC) and Size M-1 (DC) NEMA 4/4X Watertight Corrosion-Resistant Glass Polyester Enclosure Approximate Shipping Weight—6 lbs. 16-8 (4) .13 Wide Mtg. Slots 1.69 43 1.41 2.19 56 .75 Conduit Hub In Top and Bottom Class 2510 Type M Sizes M-1 and M-1P (AC) NEMA 4/4X Watertight Corrosion-Resistant Glass Polyester Enclosure Approximate Shipping Weight—6 lbs. 2.34 59 (1) .75 Conduit Top and Bottom (Std.) (1) 1.50 Conduit Top and Bottom (Max.) Class 2510 Type M Sizes M-0, M-1 and M-1P NEMA 7 & 9 Hazardous Location Cast Iron Enclosure Approximate Shipping Weight—18 lbs. © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Manual Starters and Switches Accessories and Modifications Class 2510, 2511, 2512 / Refer to Catalog 2510CT9701 www.schneider-electric.us Table 16.22: Table 16.23: Accessories—Class 2510 Types F and K Description Handle Guard Kit with Padlock Provisiona Emergency Off Actuator Additional Key for Key Operated Devices a Standard on Type K devices. Class & Type 2510FL1 2510PB1 2510FK1 $ Price 14.30 35.60 4.80 Pilot Light Kits—Class 2510 Types F and K Voltage Red Pilot Light Green Pilot Light 110–120 Vac 208–277 Vac 440–600 Vac Class & Type 9999PL11 9999PL12 9999PL13 Class & Type 9999PL11G 9999PL12G 9999PL13G Application Type KF, KG, KWb $ Price 71.00 71.00 71.00 Type FF or FG, 115–240 Vac/dc 9999PL10 9999PL10G 42.80 FWb b Lens cannot be replaced. Pilot light kits for NEMA 4 Enclosed Units are for replacement purposes only. Table 16.24: Replacement Nameplates—Class 2510 Types F and K Nameplate Type Number—Class 2510 Description Nameplate Marking Application 1-3/4" x 2-13/16" Nameplate Standard commercial switch with Embossed Mounting box cover or flush plate, Holes for #6 Oval Head including Square D Screws stainless steel plates 1-29/32" x 3-27/32" Flat Nameplate with Mounting Holes for #6 Pan Head Screws Square D NEMA 1 surface mounted enclosure or gray flush plate For Type F Starter (Includes “Reset” Indication) For Type K Switch (Blank) (Special marking – Specify marking desired.) (Blank) High Low Forward Reverse (Special marking— Specify marking desired.) $ Price Without Pilot Light With Pilot Light Without Pilot Light With Pilot Light FN1 — FN2 — 21.50 FN5 FN10 FN11 FN12 FN13 FN14 — FN20 FN21 FN22 — FN24 FN6 FN30 FN31 FN32 — — — FN40 FN41 FN42 — — 42.80 21.50 21.50 21.50 21.50 21.50 FN15 FN25 FN35 FN45 42.80 Contact Kits Table 16.25: Description Modifications (Types M & T only) Factory Modifications and Forms Red Pilot Lightc Form Number P11f Price Addition 77.00 See page 16-116 for Class 9998 Replacement Contact Kits. Field Modifications Kit Class & Type 9999MP1 (110–120 V ) 9999MP2 (208–240 V ) 9999MP3 (440–600 V ) 9999SX11 (N.O.) 9999SX12 (N.C.) Table 16.27: 71.00 Auxiliary X1 (1 N.O.) 105.00 99.00 Contactsd X2 (1 N.C.) Jumper N/A — 9998SO31 14.30 Straps e Contactor Y76 No Charge N/A — only c May only be field-added to NEMA 1 enclosures. For green pilot light, order 9999SPG1 additionally. d For proper operation, only one auxiliary contact kit per device may be added. e Used to control a single phase motor utilizing a three phase starter. f P11 Pilot Light Voltage Codes: 120 V—V02 200/208 V—V08 230 V—V03 460 V—V06 575 V—V07 The pilot light Form P11 requires a voltage code. Catalog number example: 2510MBG1V02P11. Table 16.26: How to Order To Order Specify: Class Number Type Number Catalog Number Class Type 9991 KE1 Description Class and Type $ Price Replacement Toggle Kits: Type FW and KW (NEMA 4) Type FR and KR (NEMA 7 & 9) 9998HW1 9998HR2 29.30 30.90 9998HWA1 9998HWA1 9998HR3 9998HR3 57.00 57.00 57.00 57.00 9998IL1 14.30 Catalog Number 9991EN1 9991MG1 9991MG2 $ Price NEMA 1 Oversized 9991FE1 42.80 NEMA 1 Oversized 9991KE1 42.80 NEMA 1 Jumbo 9991KE2 86.00 NEMA 3R 9991KE3 215.00 Replacement Handle Kits: NEMA 12 (Ser. B) Type MBA, MCA NEMA 4/4X (Stainless) (Ser. B) Type MBW, MCW NEMA 4/4X (Polyester) Type MBW, MCW NEMA 7 and 9 Type MBR, MCR Internal Lever Table 16.28: Enclosures For use with Class 2510 Type F and K M–Sizes M0 & M1 M–Size M1P FO1, FO1P, FO2, FO2P, FO3, FO3P, FO4, FO4P KO1, KO1A, KO1B, KO2, KO2B, KO2C, KO3, KO3A, KO3B, KO4, KO4B, KO4C, KO5, KO5A, KO5B, KO6, KO6B, KO6C Enclosure NEMA 1 Standard 29.30 57.00 57.00 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS • • Replacement Parts $ Price © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-9 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Drum Switches Type A and B Class 2601 / Refer to Catalog 2510CT9701 www.schneider-electric.us NEMA 1, 3R, 4 & 13 Without Overload Protection Class 2601 reversing drum switches may be used for across-the-line starting and reversing of AC polyphase, AC single phase or DC motors, where overload protection is not required or is provided separately. They are compact and inexpensive but ruggedly constructed. Drum switches are field convertible from maintained only to momentary only operation. This conversion consists of removing the handle screw and handle, turning the shaft 180 degrees, then replacing the handle and handle screw. Optional handles – All devices offer as standard a one piece handle. An optional ball and shaft or fluted type handle is available. Drum switches with optional handles are available on a factory Quick-Ship basis only. To order, add the letter B or F to the type number, e.g., Class 2601 Type AW2B for a ball and shaft type, Class 2601 Type AW2F for a fluted type. Add $19.10 to the price for a fluted type, no adder for a ball and shaft type. (See photos below.) Table 16.29: 600 Vac Maximum Class 2601 Ratings NEMA 1 General Purpose Enclosure Maximum Horsepower Type AG2 Voltage 360 Vdc Maximum NEMA 4 Watertight and Dusttight Enclosure NEMA 3R Rainproof Outdoor Enclosure NEMA 1 Maintained & Momentary a NEMA 13 Oiltight Flush Mounting AC Single Phase AC PolyPhase DC Type $ Price Type $ Price Type $ Price Type $ Price Type $ Price 115200/230 230 460/575 1-1/2 — 2 — — 2 — 2 1/4 — 1/4 — AG2 158.00 AW2 428.00 AH2 207.00 AG2S2 158.00 AF2 131.00 115200/230 230 460/575 1-1/2 — 3 5 — 5 — 7-1/2 2 — 2 — BG1 428.00 BW1 590.00 N/A — BG1S4 428.00 BF1 356.00 a Maintained – “Forward”; Momentary – “Reverse”; (Not field convertible) File E42243 CCN NLRV File LR25490 Class 3211-05 Approximate Dimensions 5.58 3.38 6.89 142 86 175 3.81 97 5.20 132 3.19 5.50 2.77 3.70 81 (2) 1/2" NPT Pipe Thread 140 70 94 1.82 46 2.38 .20 2.87 (4) .17 Mounting Holes 60 Type AW2 3.20 5 73 .60 81 15 Class 2601 Type AF2 Class 2601 Types AW and BW Optional Handles 4.50 6.54 166 4.82 114 5.38 4.00 6.62 122 5.18 Ball and Shaft Type 2.68 5.95 151 4.50 2.91 3.26 3.53 3.25 5.12 114 16 4.61 83 130 4.86 (2) K.O. For 1/ 2" Conduits NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 2.94 dimensions (inches) = AG/AH BG 4.00 102 Class 2601 Types AG, AH, BG Fluted Type .20 5 (4) .218 Mounting Holes Class 2601 Type BF1 Table 16.30: How to Order To Order Specify: • • 16-10 75 Class Number Type Number Catalog Number Class Type 2601 AG2 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com NEMA Rated TeSys® U Simple Motor Starter Motor Starters Refer to Catalog 8502CT0201 www.schneider-electric.us NEMA rated TeSys U motor starter is integrated, simple to choose and to install, consisting of a control unit snapped in a powerbase. NEMA rated TeSys U can be configured to fit specific applications as well. The NEMA Rated TeSys U uses the same optional accessories: reverser, current limiter, predictive maintenance options and communication options as the IEC TeSys U. Step 1 Power Base Step 2 Control Unit = Step 3 NEMA TeSys® U Motor Starter Function Modules Auxiliary Contacts Selecting a NEMA TeSys U Motor Starter in Three Steps Table 16.31: Step 1. Select Power Base (LUS32NR as a starter, LUB32NR as a self-protected starter) Three Phase (HP max.) Control Connection NEMA Size With screw terminations 1 1 Table 16.32: Single Phase (HP max.) 200/208 V 220/240 V 460 V 575/600 V 240 V 7.5 7.5 7.5 7.5 10 10 10 10 3 3 Power Bases Catalog Number LUS32NR LUB32NR $ Price 348.00 488.00 Step 2. Select Control Unit c Standard Advanced Advanced Advanced 3-phase $ Price 3-phase $ Price single-phase $ Price 3-phase $ Price Class 10 trip a Class 10 trip a Class 10 trip a Class 20 trip a 0.15–0.6 LUCAX6•• 120.00 LUCBX6•• 150.00 LUCCX6•• 150.00 LUCDX6•• 150.00 120.00 LUCB1X•• 150.00 LUCC1X•• 150.00 LUCD1X•• 150.00 0.3–1.4 LUCA1X•• 1.25–5.0 LUCA05•• 120.00 LUCB05•• 150.00 LUCC05•• 150.00 LUCD05•• 150.00 3–12 LUCA12•• 120.00 LUCB12•• 150.00 LUCC12•• 150.00 LUCD12•• 150.00 120.00 LUCB18•• 150.00 LUCC18•• 150.00 LUCD18•• 150.00 4.5–18 b LUCA18•• 8–32 b LUCA32•• 120.00 LUCB32•• 150.00 LUCC32•• 150.00 LUCD32•• 150.00 a Complete catalog number by adding appropriate code from voltage code table below. For example: LUCAX6FU. b Control units for 4.5–18 and 8–32 can be used ONLY with 32 amp rated power bases (LUS32 / LUB32 / LU2B32 / LUS32NR / LUB32NR). c The control unit contains solid state overload relay and control power source for TeSys U. For more details on the different control units, their functions, and placement on the power base see page 18-29. Setting Range (Amps) Power Base Table 16.33: Voltage Codes Volts 24 48–72 110–240 DC BLd — — AC B — — DC or AC — ESe FU d DC voltage with range of 0.90 to 1.10 of nominal. e 48–72 Vdc; 48 Vac Table 16.34: Control Unit Step 3. Select Auxiliary Contacts (optional) Auxiliary Contact Blocks Contact State for Each Modef Ready condition Fault condition Ready condition Screw Fault condition Auxiliary Contact Function Modules Screw f g E164862 CCN NLDX LR43364 Class 3211 08 © 2009 Schneider Electric All Rights Reserved Off Ready Run Short Circuit Trip Overload Trip (Manual Reset) N.O. N.C. N.O. N.O. O I O O I I I O I I I O O O O I O O O I Overload Trip (Remote/ Auto Reset)g I I I O Catalog Number LUA1C11 34.50 LUA1C20 - - 2 N.O. - - - - - - LUFN20 - - 1 N.O. and 1 N.C. - - - - - - LUFN11 - - LUFN02 2 N.C. I–indicates closed contact; O–indicates open contact Requires multifunction or advanced control unit plus fault differentiation module LUFDDA10. Accessories for both LUS32/LUS32NR and LUB32/LUB32NR Current Limiter Reverser Line phase barrier Multifunction Control Unit Function modules Communication modules TeSys U Starter Soft Starter + TeSys U Powerbus Configuration and connection accessories Quick Description Increases the breaking capacity to 130kA @ 460 V Stacked or side mounted Required for use as a self-protected combination starter (UL508E) Has functions for monitoring and predictive maintenance Fault differentiation, Thermal overload, Motor load indication Integrates into existing networks, major protocols available Use TeSys U as a starter only Use Altistart U01Soft Starter with TeSys U Use TeSys U with a prewired system PowerSuite software, busbar, external handle $ Price 34.50 For details & selection, see pages: 18-30 18-30 18-30 18-30 18-30 18-31 18-32 18-32 18-31 18-31 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 18-29 to 18-31 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 18-50 I11 Discount Schedule 16 Auxiliary Contact Contact Indicates NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Terminals Contact Normal Status 16-11 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com NEMA AC Magnetic Contactors and Starter Catalog Numbering System Class 8502, 8536, 8538 / Refer to Catalog 8502CT9701 www.schneider-electric.us Class 8536 Type S C G - 3 V02 Form S General Classification Numerals 8502 Contactor Page 16-13 8536 Starter Page 16-17 8538 Combination Starter with Disconnect Switch Page 16-30 8539 Combination Starter with Circuit Breaker Page 16-34 Used to designate specific, physical arrangements, such as number of poles, fuse clip size, etc.; but the numbering varies with Class of equipment. Consult Digest listings for specific device numbers. 8702 Reversing Contactor Page 16-43 8736 Reversing Starter Page 16-45 8738 Reversing Combination Starter with Disconnect Switch Page 16-50 8739 Reversing Combination Starter with Circuit Breaker Page 16-52 8810 Two Speed Starter Page 16-58 a 8903 Type S Lighting Contactors Page 16-65 a 8940 Pumping Plant Panel Page 16-81 a 8941 Voltage Code AC operated devices without control transformer Code Duplex Controller Page 16-85 a Voltage/Frequency V01 24/60 V02 120/60 or 110/50 V06 480/60 or 440/50 V07 600/60 or 550/50 V08 208/60 V81 - 480V Primary, 120V Secondary for units using a fused transformer control circuit Form (F4T). This is only a partial listing consult Digest pages 16-13 and 16-110 for more information. Design Type S NEMA Contactors and Starters Common Forms (factory modifications) Page 16-109 NEMA Size 8903 (only) A Size 00 B Size 0 M 30 Amperes C Size 1 P 60 Amperes D Size 2 Q 100 Amperes “Start-Stop” pushbuttons in the enclosure cover Bb Bimetallic overload relays C “Hand-Off-Auto” selector switch in the enclosure cover F4T Fused transformer control circuit (primary fuses only) Fused transformer control circuit (primary & secondary fuses) E Size 3 V 200 Amperes FF4T F Size 4 X 300 Amperes H Solid state overload relay G Size 5 Y 400 Amperes P1 Red ON pilot light in the enclosure cover H Size 6 Z 600 Amperes J Size 7 J 800 Amperes P2 Green OFF pilot light in cover S Separate control circuit X01 One “normally closed” auxiliary contact N.C. Enclosure X10 One “normally open” auxiliary contact N.O. A NEMA 12 Industrial Use F NEMA 1 Flush Mounting General Purpose Consult Digest pages 16-109 to 16-113 for additional form letters, When more than one form is applied to a single device, arrange Forms in alphabetical order. G NEMA 1 General Purpose Surface Mounting H NEMA 3R Rainproof O Open Style Device (no enclosure) R NEMA 7 & 9 Hazardous Environments, Spin Top T NEMA 7 & 9 Hazardous Environments, Bolted W NEMA 4 Watertight, 4X Corrosion Resistant Table 16.35: a b How to Order 16 To Order Specify: Catalog Number • Class Number Voltage Class Type Form(s) Code • Type Number • Voltage Code • Form(s) 8539 SCG44 V06 AH20P1X11 see pages 16-109–16-113 Note: Description: NEMA Size 1, (10 Hp) Mag-Gard Combo Starter in a NEMA Type 1 enclosure with a 480V coil, start/stop pushbutton (A), class 20 SSOLR (H20), red pilot light (P1), 1 N.O. and 1 N.C. auxiliary contact (X11) NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-12 A Combination two speed starters will replace the “S” with a “C”, “U” or “D”. Pumping plant panels have Various leading characters. Not all use Type S contactors. Duplex controllers use “N”, “C”, “U”, and “D”. May also designate Motor Logic Plus overload relay IMPORTANT - This information is intended for general interpretation of catalog numbers. Do not use to create catalog numbers for this product line. Note: The terms Type and Form do not appear in the catalog number. Devices are wired from factory according to customer preference as follows: • • • Common control Separate control (Form S) Control power transformer (CPT) © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors— NEMA Rated General Information Class 8502 / Refer to Catalog 8502CT9701 www.schneider-electric.us Class 8502 Type S magnetic contactors are used to switch heating loads, capacitors, transformers, and electric motors where overload protection is provided separately. Class 8502 contactors are available in NEMA sizes 00 through 7. Type S contactors are designed for operation at 600 Vac, 50 to 60 Hz. Table 16.36: NEMA Size 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Continuous Current Ratings 1-1/2 1-1/2 2 2 NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure (Size 0-5)a NEMA 1 General Purpose Enclosure Open Type Max. Hp Type $ Price Type $ Price Type SAO12b 329.00 SAG12b 360.00 Use Size 0 $ Price 00 9 200 230 460 575 0 18 200 230 460 575 3 3 5 5 SBO2b 414.00 SBG2b 446.00 SBW12b 945.00 1 27 200 230 460 575 7-1/2 7-1/2 10 10 SCO2b 485.00 SCG2b 518.00 SCW12b 1031.00 2 45 200 230 460 575 10 15 25 25 SDO2b 882.00 SDG2b 1031.00 SDW12b 1391.00 3 90 200 230 460 575 25 30 50 50 SEO2b 1425.00 SEG2b 1715.00 SEW12b 3167.00 4 135 200 230 460 575 40 50 100 100 SFO2b 3419.00 SFG2b 4022.00 SFW12b 6501.00 5 270 200 230 460 575 75 100 200 200 SGO2b 7451.00 SGG2b 8550.00 SGW12b 11685.00 6 540 200 230 460 575 150 200 400 400 SHO2b 20339.00 SHG2b 25172.00 SHW2b 32378.00 7 810 200 230 460 575 — 300 600 600 SJO2b 29028.00 SJG2b 33875.00 SJW2b 40995.00 Type SCO2 Size 1, 3-Pole Contactor a b Motor Voltage Size 6 and 7 are rated NEMA 4 only, painted sheet steel. Coil voltage code must be specified to order this product. Refer to standard voltage codes shown below. Table 16.37: Coil Voltage Codes Voltage 60 Hz 24c 120d 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 c NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8502SBO2V01S). d 120 Volt Polyphase contactors are wired for separate control Form S must be specified (i.e., order as 8502SCO2V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Separate Enclosures (Class 9991). . . . . . . . . . . . . . . . . . . . . . . .page 16-102 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-13 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors— NEMA Rated Class 8502 / Refer to Catalog 8502CT9701 www.schneider-electric.us Table 16.38: NEMA Size 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Continuous Current Ratings Motor Voltage Max. Hp NEMA 4X Watertight, Dusttight, Corrosion-Resistant Glass-Polyester Enclosure Bolted Type Type 00 9 200 230 460 575 0 18 200 230 460 575 1 27 200 230 460 575 2 45 3 1-1/2 1-1/2 2 2 3 3 5 5 $ Price Use Size 0 NEMA 12/3R a Dusttight & Driptight Industrial Use Enclosure NEMA 7 & 9 Hazardous Locations Div. 1 & 2 Class I, Groups C & D Class II, Groups E, F, & G Cast Ironb Cast Aluminumd $ Price Use Size 0 SPIN TOP® Type $ Price Use Size 0 Type $ Price Use Size 0 SBW22c 945.00 SBT2c SBT42c 2070.00 SBR2c 2591.00 SBA2c 617.00 7-1/2 7-1/2 10 10 SCW22c 1031.00 SCT2c SCT42c 2163.00 SCR2c 2705.00 SCA2c 689.00 200 230 460 575 10 15 25 25 SDW22c 2057.00 SDT2c SDT42c 3482.00 SDR2c 4350.00 SDA2c 1344.00 90 200 230 460 575 25 30 50 50 SEW22c 3959.00 — SET42c 5205.00 SER2c 2007.00 SEA2c 2084.00 4 135 200 230 460 575 40 50 100 100 SFW22c 8123.00 — SFT42c 8415.00 SFR2c 10524.00 SFA2c 5247.00 5 270 200 230 460 575 75 100 200 200 — — — SGT42c 18542.00 SGR2c 23178.00 SGA2c 11685.00 6 540 200 230 460 575 150 200 400 400 — — — — — — — SHA2c 29016.00 7 810 200 230 460 575 – 300 600 600 — — — — — — — SJA2c 37719.00 a b c d NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Limited to one Pilot Light and a Selector Switch or Start-Stop Push Button. Coil voltage code must be specified to order this product. Refer to voltage codes shown on page 16-13. NEMA 7 and 9 bolted cast aluminum are not UL listed. Auxiliary Units Auxiliary contacts and power poles can be added by the factory or in the field on all Type S starters and contactors. The table below shows the maximum number of auxiliary units (in addition to the holding circuit contact) that can be added to a given size starter or contactor. In addition, it is possible to add a second internal contact on NEMA Size 0, 1, and 2 contactors and starters. Table 16.39: NEMA Size Type No. of Poles of Basic Contactor 00 SA 2–3 0, 1 and 2 SB SC SD 1, 2 or 3 16 3, 4 and 5 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 6 and 7 SE SF SG SH SJ 4 or 5 2–5 (Size 3 and 4) Maximum Number of External Auxiliary Units (In addition to holding circuit contact) 4 single circuit auxiliary contacts (N.O. or N.C.) if second internal auxiliary contact is not used. 4 single circuit auxiliary contacts (N.O. or N.C.) 2 single circuit auxiliary contacts (N.O. or N.C.) plus 1 power pole adder (1 or 2 poles, N.O. or N.C.). 2 single circuit auxiliary contacts (N.O. or N.C.) 3 single circuit auxiliary contacts (N.O. or N.C.) 2–3 (Size 5) 2 single circuit auxiliary contacts (N.O. or N.C.) plus 1 NEMA Size 0-1 or Size 2 power pole adder (1 or 2 poles, N.O. or N.C.) 2–3 3 single circuit auxiliary contacts (N.O. or N.C.) 2 single circuit auxiliary contacts (N.O. or N.C.) plus 1 NEMA Size 0–1 or Size 2 power pole adder (1 or 2 poles, N.O. or N.C.) Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Separate Enclosures (Class 9991) . . . . . . . . . . . . . . . . . . . . . . . page 16-102 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-14 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors—NEMA Rated Class 8502 / Refer to Catalog 8502CT9701 www.schneider-electric.us Table 16.40: NEMA Size 600 Vac Maximum—50–60 Hz Continuous Current Ratings Motor Voltage NEMA 1 General Purpose Enclosure Open Type Max. Hp Type $ Price Type $ Price NEMA 4 & 4X –Watertight, Dusttight, Brushed Stainless Steel Enclosure (Size 0-5)a Type $ Price 1-Pole Single Phase 1 2 2 3 SBO5b 329.00 SBG5b 360.00 SBW15b 860.00 27 115 230 115 230 SCO5b 399.00 SCG5b 432.00 SCW15b 945.00 00 9 115 230 1/3 1 SAO11b 287.00 SAG11b 318.00 Use Size 0 0 18 115 230 1 2 SBO1b 372.00 SBG1b 404.00 SBW11b 903.00 1 27 115 230 2 3 SCO1b 441.00 SCG1b 476.00 SCW11b 989.00 2 45 115 230 3 7-1/2 SDO1b 827.00 SDG1b 975.00 SDW11b 1998.00 3 90 — — — — SEO1b 1310.00 SEG1b 1601.00 SEW11b 3054.00 4 135 — — SFO1b 3162.00 SFG1b 3765.00 SFW11b 6245.00 5 270 — — SGO1b 6852.00 SGG1b 7952.00 SGW11b 11087.00 6 540 — — SHO1b 17433.00 SHG1b 22266.00 SHW1b 29388.00 7 810 — — SJO1b 25452.00 SJG1b 30285.00 SJW1b 37407.00 0 18 200 230 460 575 3 3 5 5 SBO3b 527.00 SBG3b 561.00 SBW13b 1074.00 1 27 200 230 460 575 SCO3b 599.00 SCG3b 633.00 SCW13b 1146.00 2 45 SDO3b 1139.00 SDG3b 1287.00 SDW13b 2712.00 3 90 SEO3b 1823.00 SEG3b 2114.00 SEW13b 3965.00 4 135 SFO3b 4757.00 SFG3b 5360.00 SFW13b 8864.00 0 18 1 2-Pole Single Phase 4-Pole Polyphase 7-1/2 7-1/2 10 10 200 230 460 575 200 230 460 575 200 230 460 575 10 15 25 25 25 30 50 50 40 50 100 100 5-Pole Polyphase 18 200 230 460 575 3 3 5 5 SBO4b 684.00 SBG4b 719.00 SBW14b 1229.00 1 27 200 230 460 575 7-1/2 7-1/2 10 10 SCO4b 755.00 SCG4b 788.00 SCW14b 1301.00 1857.00 SDW14b 3281.00 3024.00 SEW14b 4877.00 7182.00 SFW14b 10688.00 200 10 230 15 SDO4b 1710.00 SDG4b 460 25 575 25 200 25 230 30 3 90 SEO4b 2735.00 SEG4b 460 50 575 50 200 40 230 50 4 135 SFO4b 6579.00 SFG4b 460 100 575 100 Size 6 and 7 are rated NEMA 4 only, painted sheet steel. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed on page 16-13. 2 a b 45 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 0 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-23 Factory Modifications (Forms). . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Separate Enclosures (Class 9991). . . . . . . . . . . . . . . . . . . . . . . page 16-102 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-15 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors— NEMA Rated Class 8502 / Refer to Catalog 8502CT9701 \ www.schneider-electric.us Table 16.41: NEMA Size 600 Vac Maximum—50–60 Hz Continuous Current Ratings Motor Voltage NEMA 4X Watertight, Dusttight Corrosion-Resistant Glass-Polyester Enclosure Max. Hp Type $ Price NEMA 12/3R a Dusttight & Driptight Industrial Use Enclosure NEMA 7 & 9, Div. 1 & 2 Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G Bolted Type Cast Iron b Cast Aluminumd $ Price SPIN TOP® Type $ Price Type $ Price 1-Pole Single Phase 0 18 1 27 115 230 115 230 1 2 2 3 — — — — — SBT5c SBT45c 1979.00 SBR5c 2475.00 SBA5c 531.00 — SCT5c SCT45c 2070.00 SCR5c 2591.00 SCA5c 603.00 2-Pole Single Phase 00 9 115 230 1/3 1 0 18 115 230 1 2 SBW21c 903.00 SBT1c SBT41c 2021.00 SBR1c 2528.00 SBA1c 575.00 1 27 115 230 2 3 SCW21c 989.00 SCT1c SCT41c 2100.00 SCR1c 2627.00 SCA1c 647.00 2 45 115 230 SDW21c 1998.00 SDT1c SDT41c 3402.00 SDR1c 4257.00 SDA1c 1287.00 3 90 — — — — 4 135 — 5 270 6 7 Use Size 0 3 7-1/2 Use Size 0 Use Size 0 Use Size 0 — — SET41c 5076.00 SER1c 6344.00 SEA1c 1971.00 — Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) — — SFT41c 8139.00 SFR1c 10175.00 SFA1c 4991.00 — — — — — — — — — SGR1c 22350.00 SGA1c 11087.00 540 — — — — — — — — — — — SHA1c 26112.00 810 — — — — — — — — — SJA1c 34131.00 3 3 5 5 SBW23c 1074.00 SBT3c SCW23c 1146.00 SCT3c 4-Pole Polyphase 0 18 200 230 460 575 1 27 200 230 460 575 7-1/2 7-1/2 10 19 200 230 460 575 200 230 460 575 200 230 460 575 10 15 25 25 25 30 50 50 40 50 100 100 2 45 3 90 4 135 SDW23c 2712.00 SDT3c Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) 2199.00 SBR3c 2748.00 SBA3c 732.00 2291.00 SCR3c 2867.00 SCA3c 804.00 4199.00 SDR3c 5255.00 SDA3c 1601.00 — SER3c 7604.00 SEA3c 2484.00 — SFR3c 14283.00 SFA3c 7011.00 Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) 5-Pole Polyphase 0 18 200 230 460 575 3 3 5 5 1 27 200 230 460 575 7-1/2 7-1/2 10 10 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 2 45 3 90 4 135 200 230 460 575 200 230 460 575 200 230 460 575 10 15 25 25 25 30 50 50 40 50 100 100 a b c d Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) — — — — — SBA4c 890.00 — — — — — SCA4c 959.00 — — — — — SDA4c 2169.00 — — — — — SEA4c 3396.00 — — — — — SFA4c 8837.00 NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Limited to 1 pilot light and a selector switch or Start-Stop push button. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown on page 16-13. NEMA 7 and 9 bolted cast aluminum are not UL listed. Coil Voltage Codes and page number reference for additional information are shown on page 16-13. For How to Order Information, see page 16-12. 16-16 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Starters— NEMA Rated Class 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us General Information Type S magnetic starters are used for full-voltage starting and stopping of AC squirrel cage motors. Motor overload protection is provided via melting alloy type thermal overload relays. Type S starters are available in NEMA Sizes 00 through 7, and are designed for operation at 600 Vac, 50 to 60 Hz. ® Solid State Overload Relay Protection (MOTOR LOGIC ) These ambient insensitive overload relays are available on Sizes 00 through 6 and standard on size 7. They provide phase loss, phase unbalance protection. To order, add Form H10 (for Class 10), H20 (for Class 20), or H30 (for selectable trip class protection). For more information about MOTOR LOGIC, see pages 16-91, 16-111 and 16-112. 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units (Sizes 00–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.42: Type SCO3 Size 1, 3-Pole Starter NEMA Size Schneider Electric offers express shipping for factory modified NEMA Type 1 and Type 12/3R Enclosed Starters. When you need them fast, our Laser™ Delivery program is the answer to getting your product when you need it most. Ask for Laser™ Delivery, then select the product and the modifications you need when you place your order. It’s as easy as that! Continuous Current Ratings Motor Voltage Max. Hp NEMA 1 General Purpose Enclosure NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure (Size 0-5)a Type $ Price Type $ Price Type SAO12b 386.00 SAG12b 419.00 Use Size 0 $ Price NEMA 4X Watertight, Dusttight, Corrosion-Resistant Glass-Polyester Enclosure Type $ Price 00 9 200 230 460 575 0 18 200 230 460 575 3 3 5 5 SBO2b 485.00 SBG2b 518.00 SBW12b 1017.00 SBW22b 1017.00 1 27 200 230 460 575 7-1/2 7-1/2 10 10 SCO3b 557.00 SCG3b 590.00 SCW13b 1103.00 SCW23b 1103.00 2 45 200 230 460 575 10 15 25 25 SDO1b 1013.00 SDG1b 1160.00 SDW11b 2186.00 SDW21b 2186.00 3 90 200 230 460 575 25 30 50 50 SEO1b 1638.00 SEG1b 1929.00 SEW11b 3380.00 SEW21b 4226.00 4 135 200 230 460 575 40 50 100 100 SFO1b 3747.00 SFG1b 4350.00 SFW11b 6827.00 SFW21b 8535.00 5 270 200 230 460 575 75 100 200 200 SGO1b 9152.00 SGG1b 10254.00 SGW11b 15795.00 — — 6 540 200 230 460 575 150 200 400 400 SHO2b 21756.00 SHG2b 28881.00 SHW2b 36003.00 — — 7 810 200 230 460 575 — 300 600 600 SJO2b 31256.00 SJG2b 38381.00 SJW2b 45503.00 — — a b 1-1/2 1-1/2 2 2 Open Type Use Size 0 Size 6 and 7 are rated NEMA 4 only, painted sheet steel. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Table 16.43: Coil Voltage Codes Voltage NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Code $ Price Adder 60 Hz 50 Hz 24c — V01 No Charge 120d 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge 277 — V04 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 c 24 V coils are not available on Sizes 4–7. On Sizes 00-3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8536SBO2V01S). d 120 Volt Polyphase contactors are wired for separate control. Form S (separate control) must be specified (i.e., order as 8536SCO2V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Separate Enclosures (Class 9991). . . . . . . . . . . . . . . . . . . . . . . .page 16-102 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-17 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Starters— NEMA Rated Class 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Table 16.44: 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units (Sizes 00–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Size Continuous Current Ratings Motor Voltage NEMA 7 & 9 For Hazardous Locations Div. 1 & 2 Class I–Groups C, D Class II–Groups E, F, & G Max. Hp Bolted Type Cast Ironb 1-1/2 1-1/2 2 2 Cast Aluminumd $ Price NEMA 12/3Ra Dusttight & Driptight Industrial Use Enclosure SPIN TOP® Type $ Price Type $ Price 00 9 200 230 460 575 0 18 200 230 460 575 3 3 5 5 SBT2c SBT42c 2150.00 SBR2c 2690.00 SBA2c 689.00 1 27 200 230 460 575 7-1/2 7-1/2 10 10 SCT3c SCT43c 2241.00 SCR3c 2804.00 SCA3c 761.00 2 45 200 230 460 575 10 15 25 25 SDT1c SDT41c 3623.00 SDR1c 4527.00 SDA1c 1472.00 3 90 200 230 460 575 25 30 50 50 — SET43c 5439.00 SER3c 6800.00 SEA1c 2298.00 4 135 200 230 460 575 40 50 100 100 — SFT41c 8778.00 SFR1c 10971.00 SFA1c 5574.00 5 270 200 230 460 575 75 100 200 200 — SGT41c 20970.00 SGR1c 26211.00 SGA1c 13386.00 6 540 200 230 460 575 150 200 400 400 — — — — — SHA2c 32727.00 7 810 200 230 460 575 – 300 600 600 — — — — — SJA2c 42227.00 a b c d Use Size 0 Use Size 0 Use Size 0 NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Limited to 1 Pilot Light and Selector Switch or Start-Stop Push-Button. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection Table 16.43 shown on page 16-17. NEMA 7 and 9 bolted cast aluminum are not UL listed. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Separate Enclosures (Class 9991) . . . . . . . . . . . . . . . . . . . . . . . page 16-102 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Schneider Electric offers express shipping for factory modified NEMA Type 1 and Type 12/3R Enclosed Starters. When you need them fast, our Laser™ Delivery program is the answer to getting your product when you need it most. Ask for Laser™ Delivery, then select the product and the modifications you need when you place your order. It’s as easy as that! 16-18 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Starters Class 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us 2-Pole Single Phase—600 Vac Maximum—50–60 Hz Table 16.45: Note that prices shown do not include thermal units. Devices require 1 thermal unit. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Size Continuous Current Ratings Motor Voltage NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure NEMA 1 General Purpose Enclosure Open Type Max. Hp Type $ Price Type $ Price 1/3 1 SAO11a 386.00 SAG11a 419.00 Type $ Price NEMA 4X Watertight, Dusttight, Corrosion-Resistant Glass-Polyester Enclosure Type $ Price 00 9 115 230 0 18 115 230 1 2 SBO1a 435.00 SBG1a 468.00 SBW11a 966.00 SBW21a 966.00 1 27 115 230 2 3 SCO1a 507.00 SCG1a 539.00 SCW11a 1052.00 SCW21a 1052.00 1P 36 115 230 3 5 SCO2a 662.00 SCG2a 696.00 SCW12a 1209.00 SCW22a 1209.00 2 45 115 230 3 7-1/2 SDO6a 918.00 SDG6a 1067.00 SDW16a 2091.00 SDW26a 2091.00 Use Size 0 Use Size 0 4-Pole, 2-Phase—600 Vac Maximum—50–60 Hz Table 16.46: Note that prices shown do not include thermal units. Devices require 2 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Size Continuous Current Ratings Motor Voltage 3 3 5 5 NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure NEMA 1 General Purpose Enclosure Open Type Max. Hp NEMA 4X Watertight, Dusttight, Corrosion-Resistant Glass-Polyester Enclosure Type $ Price Type $ Price Type $ Price Type $ Price SBO3a 629.00 SBG3a 675.00 SBW13a 1229.00 SBW23a 1229.00 0 18 200 230 460 575 1 27 200 230 460 575 7-1/2 7-1/2 10 10 SCO4a 714.00 SCG4a 761.00 SCW14a 1301.00 SCW24a 1301.00 2 45 200 230 460 575 10 15 25 25 SDO2a 1283.00 SDG2a 1430.00 SDW12a 2910.00 SDW22a 2910.00 3 90 200 230 460 575 25 30 50 50 SEO2a 2096.00 SEG2a 2357.00 SEW12a 4206.00 4 135 200 230 460 575 40 50 100 100 SFO2a 5142.00 SFG2a 5715.00 SFW12a 9221.00 a Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed below. Table 16.47: Coil Voltage Codes Voltage NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Code $ Price Adder 60 Hz 50 Hz 24b — V01 No Charge 120c 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge 277 — V04 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 b 24 V coils are not available on Sizes 4–7. On sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8536SBO2V01S). c 120 Volt Polyphase starters are wired for separate control. Form S (separate control) must be specified (i.e., order as 8536SCO2V02S). Note: For voltage codes used with control transformers, see 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Separate Enclosures (Class 9991). . . . . . . . . . . . . . . . . . . . . . . .page 16-102 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-19 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Starters Class 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us 2-Pole Single Phase—600 Vac Maximum—50–60 Hz Table 16.48: Note that prices shown do not include thermal units. Devices require 1 thermal unit. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Size Continuous Current Ratings Motor Voltage NEMA 7 & 9 Hazardous Locations, Div. 1 & 2 Class I, Groups C & D Class II, Groups E, F, & G Max. Hp Bolted Type Cast Ironb Cast Aluminumd $ Price NEMA 12/3Ra Dusttight & Driptight Industrial Use Enclosure SPIN TOP® Type $ Price Type $ Price 00 9 115 230 1/3 1 0 18 115 230 1 2 SBT1c SBT41 2091.00 SBR1c 2619.00 SBA1c 639.00 1 27 115 230 2 3 SCT1c SCT41 2186.00 SCR1c 2732.00 SCA1c 710.00 1P 36 115 230 3 5 SCT2c SCT42 2363.00 SCR2c 2952.00 SCA2c 867.00 2 45 115 230 SDT6c SDT46 3513.00 SDR6c 4400.00 SDA6c 1380.00 d Use Size 0 3 7-1/2 Use Size 0 Use Size 0 NEMA 7 and 9 bolted cast aluminum are not UL listed. 4-Pole 2-Phase—600 Vac Maximum—50–60 Hz Table 16.49: Note that prices shown do not include thermal units. Devices require 2 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Size Continuous Current Ratings Motor Voltage Max. Hp NEMA 7 & 9 Hazardous Locations Class I, Groups C & D Class II, Groups E, F, & G Coil Voltage Bolted Type Cast Ironb Cast Aluminum $ Price NEMA 12/3R a Dusttight & Driptight Industrial Use Enclosure SPIN TOP® Type $ Price Type $ Price 0 18 200 230 460 575 3 3 5 5 208 240 480 600 SBT3c 2348.00 SBR3c 2939.00 SBA3c 846.00 1 27 200 230 460 575 7-1/2 7-1/2 10 10 208 240 480 600 SCT4c 2433.00 SCR4c 3047.00 SCA4c 932.00 2 45 200 230 460 575 10 15 25 25 208 240 480 600 4797.00 SDR2c 6002.00 SDA2c 1742.00 3 90 200 230 460 575 25 30 50 50 208 240 480 600 — SER2c 8679.00 SEA2c 2726.00 4 135 200 230 460 575 40 50 100 100 208 240 480 600 — — SFA2c 7370.00 a b c SDT2c Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) — NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Limited to 1 Pilot Light and Selector Switch or Start-Stop Push-Button. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed on page 16-19. 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Separate Enclosures (Class 9991) . . . . . . . . . . . . . . . . . . . . . . . page 16-102 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-20 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Starters— NEMA Rated Class 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Types SB–SD With Auxiliary Load Terminals It is sometimes desirable to use capacitors in motor branch circuits to improve power factor. The Size 0–2 Type SB–SD starters listed below include three auxiliary terminals to allow easy connection of power factor correction capacitors. When capacitors are connected using these terminals, no adjustment to the selection of thermal units is necessary. The auxiliary terminals accept #12–16 solid or stranded wire. NEMA Size 3 & 4 starters have provisions for auxiliary connections. User must supply lugs as necessary. The Type S starters with auxiliary load terminals may also be used to control two motors simultaneously from a single starter. However, this application is tightly restricted by Section 430-53 of the National Electrical Code. Refer to the NEC for restrictions regarding overload protection, size of controller and motor branch circuit protection. Table 16.50: 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Size Motor Voltage Max. Hp Open Type $ Price 0 200 230 460 575 3 3 5 5 SBTO2a 485.00 1 200 230 460 575 7-1/2 7-1/2 10 10 SCTO3a 557.00 2 200 230 460 575 10 15 25 25 SDTO1a 1011.00 Extra Capacity Single Phase Starters (Not NEMA Rated) 2-Pole Single Phase—250 Vac Maximum—50–60 Hz Table 16.51: Note that prices shown do not include thermal unit. Devices require 1 thermal unit. Standard trip thermal unit is $21.50 each. See page 16-125 for selection information. Motor Voltage Max. Hp 115 230 5 10 115 230 7-1/2 15 a b c Open Type NEMA 1 General Purpose Enclosure Type $ Price Type SDO8ab 1304.00 — SEO6a 1431.00 SEG6a $ Price — NEMA 3R Rainproof, Sleet Resistant, Outdoor Use Enclosure NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure Type $ Price Type SDH8ab 1787.00 — 2091.00 SEW16a 1722.00 SEH6a $ Price — 3176.00 NEMA 4X Watertight Corrosion Resistant Glass-Polyester Enclosure Type $ Price NEMA 12/3R c Dusttight & Driptight Industrial Use Enclosure Type — — — SEW26a 3969.00 SEA6a $ Price — 2091.00 Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Uses a Size 3 overload relay. NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Table 16.52: Coil Voltage Codes Voltage NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Code $ Price Adder 60 Hz 50 Hz 24d — V01 No Charge 120e 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge 277 — V04 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 d 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified. e 120 Volt Polyphase starters are wired for separate control and must be ordered with Form S (i.e., 8536SCO2V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-23 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Separate Enclosures (Class 9991). . . . . . . . . . . . . . . . . . . . . . . .page 16-102 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-21 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors and Starters—NEMA Rated Class 8502, 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Application Data for Selection Table 16.53: NEMA Size Load Voltage Maximum Hp Rating— Nonplugging and Nonjogging Duty Single Phase PolyPhase Maximum Hp Rating— Plugging and Jogging Duty a Single Phase PolyPhase b 16 c NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS d e Service— Limit Current Rating, Amperes b Tungsten and Infrared Lamp Load, Amperes— 250 Volts Max. c Resistance Heating Loads, KW— other than Infrared Lamp Loads d Transformers Having Inrush Currents (Worst Case Peak) of Not More Than 20 Times Peak of Continuous Current Rating Transformers Having Inrush Currents (Worst Case Peak) of Over 20 Through 40 Times Peak of Continuous Current Rating 3Ø Rating for Switching Capacitors e Single Phase PolyPhase Single Phase PolyPhase Single Phase PolyPhase KVAR 00 115 200 230 380 460 575 1/2 — 1 — — — — 1-1/2 1-1/2 1-1/2 2 2 — — — — — — — — — — — — 9 9 9 9 9 9 11 11 11 11 11 11 5 5 5 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 0 115 200 230 380 460 575 1 — 2 — — — — 3 3 5 5 5 1/2 — 1 — — — — 1-1/2 1-1/2 1-1/2 2 2 18 18 18 18 18 18 21 21 21 21 21 21 10 10 10 — — — — — — — — — — — — — — — 0.6 — 1.2 — 2.4 3.0 — 1.8 2.1 — 4.2 5.2 0.3 — 0.6 — 1.2 1.5 — 0.9 1.0 — 2.1 2.6 — — — — — — 1 115 200 230 380 460 575 2 — 3 — — — — 7-1/2 7-1/2 10 10 10 1 — 2 — — — — 3 3 5 5 5 27 27 27 27 27 27 32 32 32 32 32 32 15 15 15 — — — 3 — 6 — 12 15 5 9.1 10 16.5 20 25 1.2 — 2.4 — 4.9 6.2 — 3.6 4.3 — 8.5 11.0 0.6 — 1.2 — 2.5 3.1 — 1.8 2.1 — 4.3 5.3 — — — — — — 1P 115 230 3 5 — — 1-1/2 3 — — 36 36 42 42 24 24 — — — — — — — — — — — — — — — 7-1/2 10 15 15 15 — 15 20 30 30 30 25 30 50 60 60 60 75 125 150 150 125 150 250 300 300 — — — 45 45 45 45 45 45 90 90 90 90 90 90 135 135 135 135 135 270 270 270 270 270 540 540 540 540 540 810 810 810 52 52 52 52 52 52 104 104 104 104 104 104 156 156 156 156 156 311 311 311 311 311 621 621 621 621 621 932 932 932 115 3 — 2 200 — 10 — 230 7-1/2 15 5 2 380 — 25 — 460 — 25 — 575 — 25 — 115 — — — 200 — 25 — 230 — 30 — 3 380 — 50 — 460 — 50 — 575 — 50 — 200 — 40 — 230 — 50 — 4 380 — 75 — 460 — 100 — 575 — 100 — 200 — 75 — 230 — 100 — 5 380 — 150 — 460 — 200 — 575 — 200 — 200 — 150 — 230 — 200 — 6f 380 — 300 — 460 — 400 — 575 — 400 — — 300 — 230 460 — 600 — 7f 575 — 600 — Tables and footnotes are taken from NEMA Standards. a Continuous Current Rating, Amperes— 600 Volt Max. KVA Rating for Switching Transformer Primaries at 50 or 60 Cycles Ratings shown are for applications requiring repeated interruptions of stalled motor current or repeated closing of high transient currents encountered in rapid motor reversal, involving more than five openings or closings per minute and more than ten in a tenminute period, such as plug-stop, plug-reverse or jogging duty. Ratings apply to single speed and multi-speed controllers. Per NEMA Standards paragraph ICS 2-321.20, the service-limit current represents the maximum rms current, in Amperes, which the controller may be expected to carry for protracted periods in normal service. At service-limit current ratings, temperature rises may exceed those obtained by testing the controller at its continuous current rating. The ultimate trip current of over-current (overload) relays or other motor protective devices shall not exceed the service-limit current ratings of the controller. FLUORESCENT LAMP LOADS—300 VOLTS AND LESS—The characteristics of fluorescent lamps are such that it is not necessary to derate Class 8502 contactors below their normal continuous current rating. Class 8903 contactors may also be used with fluorescent lamp loads. For controlling tungsten and infrared lamp loads, and resistance heating loads, Class 8903 AC lighting contactors are recommended. These contactors are specifically designed for such loads and are applied at their full rating as listed in the Class 8903 Section. Ratings apply to contactors which are employed to switch the load at the utilization voltage of the heat producing element with a duty which requires continuous operation of not more than five openings per minute. Class 8903 Types L and S lighting contactors are rated for resistance heating loads. When discharged, a capacitor has essentially zero impedance. For repetitive switching by a contactor, sufficient impedance should be connected in series to limit inrush current to not more than 6 times the contactor rated continuous current. In many installations, the impedance of connecting conductors may be sufficient for this purpose. When switching to connect additional banks, the banks already on the line may be charged and can supply additional available short-circuit current which should be considered when selecting the impedance to limit the current. 16-22 30 5 8.5 2.1 — 1.0 — — 30 — 15.4 — 6.3 — 3.1 — 30 10 17 4.1 7.2 2.1 3.6 8 — — 28 — — — — — — 20 34 8.3 14 4.2 7.2 16 — 25 43 10.0 18 5.2 8.9 20 60 10 17 4.1 — 2.0 — — 60 — 31 — 12 — 6.1 — 60 20 34 8.1 14 4.1 7.0 27 — — 56 — — — — — — 40 68 16 28 8.1 14 53 — 50 86 20 35 10 18 67 120 — 45 — 20 — 10 — 120 30 52 14 23 6.8 12 40 — — 86.7 — — — — — — 60 105 27 47 14 23 80 — 75 130 34 59 17 29 100 240 — 91 — 41 — 20 — 240 60 105 27 47 14 24 80 — — 173 — — — — — — 120 210 54 94 27 47 160 — 150 260 68 117 34 59 200 480 — 182 — 81 — 41 — 480 120 210 54 94 27 47 160 — — 342 — — — — — — 240 415 108 188 54 94 320 — 300 515 135 234 68 117 400 — 180 315 — — — — 240 — 360 625 — — — — 480 — 450 775 — — — — 600 The ratings for capacitor switching above assume the following maximum available fault currents: — NEMA Size 00–3: 5,000 A RMS Sym. — NEMA Size 4–5: 10,000 A RMS Sym. — NEMA Size 6: 18,000 A RMS Sym. — NEMA Size 7: 30,000 A RMS Sym. Note: If available fault current is greater than these values, connect sufficient impedance in series as noted in the previous paragraph. f For NEMA Size 6 & 7, the operation rate is as follows: Continuous operation rate is 3 operations per minute maximum; Jogging or Plugging Duty operation rate is 15 operations per minute for a maximum of three minutes. The motor ratings in Table 16.53 are NEMA standard ratings and apply only when the code letter of the motor is the same as or occurs earlier in the alphabet than is shown in the Table 16.54. Motors having code letters occurring later in the alphabet may require a larger controller. Consult Square D/ Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). Table 16.54: Motor Hp Rating Maximum Allowable Motor Code Letter 1-1/2–2 3–571/2 & above L K H © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors and Starters—NEMA Rated Class 8502, 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Table 16.55: NEMA Size AA Dimensions for Class 8502 Open Type Type Dimensions—Inches (Refer to Appropriate Figure) No. of Poles Fig. No. 1 00 SAO 2–3 0 SBO 1–3 1 SCO 4–5 2 SDO B C D E F G H I IN IN IN IN IN IN IN IN IN lbs. 3-7/32 4-11/32 4-7/32 1-5/8 1-5/8 7/32 3-15/16 — — 4 3-7/32 4-11/32 4-7/32 1-5/8 1-5/8 7/32 3-15/16 — — 4 4-1/4 4-11/32 4-7/32 1-5/8 2-5/8 7/32 3-15/16 — — 4-1/2 I 4-5/16 5-1/8 4-15/16 2-5/32 2-5/32 7/32 4-19/32 17/32 1-1/16 6-3/4 5-5/8 5-1/8 4-15/16 2-5/32 3-15/32 7/32 4-19/32 17/32 1-1/16 8-1/4 D E 1-7/8 14 G B H B H 2–3 3 4 RESET 1 4–5 5-15/32 7-3/32 6-1/2 3-17/32 5/16 6-1/32 3-1/4 4-3/4 4–5 9-3/4 7-7/8 6-1/2 3-15/16 5-13/16 5/16 7 4-17/32 9-1/16 22 2–3 6 8-3/16 6-1/2 2-1/16 3-15/16 5/16 7 3-19/32 5-5/16 18 9-3/4 8-3/16 6-1/2 3-15/16 5-13/16 5/16 7 4-17/32 9-1/16 22 SEO CC G F Wt A 1 2–3 FE D Figure 1 Class 8502 Figure 2 Class 8536 I 1 SFO K D A L C E K J 1 4–5 5 SGO 2–3 1 8-2/3 12-5/16 8-3/4 5/8 11-1/8 4-3/4 7-1/4 45 6 SHO 2–3 1 10-35/64 28-1/16 9 3-17/32 7-1/32 3-1/4 5-13/16 5-1/16 18-9/16 4-3/4 7-1/4 80 7 SJO 2–3 1 10-35/64 37-1/4 10-7/8 3-17/32 7-1/32 7-7/32 22-3/8 4-3/4 7-1/4 135 F B Pilot Light RESET Table 16.56: 00, 0, 1, 1P Dimensions for 8536 Open Type 0, 1 SAO– SCO SBO– SCO 2 SDO 2 3-1/2 6-49/64 4-7/32 1/2 1 1-39/64 13/64 6-1/4 3-31/32 4 2 4-17/32 6-49/64 4-7/32 1/2 1 2-2/3 13/64 6-1/4 3-31/32 5-1/2 4-5/16 7-13/16 4-15/16 1/2 1 2-5/32 13/64 7-11/32 4-1/16 7-3/4 5-5/8 7-13/16 4-15/16 1/2 1 3-15/32 13/64 7-11/32 4-1/16 9-1/4 2–3 2–3 4 5 5-15/32 11-3/32 6-1/2 7/8 1-3/4 3-19/32 5/16 10-3/16 5-3/4 17 4 9-3/4 12-1/8 6-1/2 1-13/16 1-3/4 5-13/16 5/16 11-3/16 5-3/4 25 3 6 12-7/8 6-1/2 1-13/16 1-3/4 3-15/16 5/16 11-3/16 5-3/4 22 9-3/4 12-7/8 6-1/2 1-13/16 1-3/4 5-29/32 5/16 11-3/16 5-3/4 25 62 SEO 5 SGO 3 2 8-9/16 17-9/16 8-3/4 4-3/4 7-1/4 5-12/32 5/8 16-3/8 6 6 SHO 3 2 12-11/32 28-1/16 9 4-3/4 7-1/4 5-25/32 5-1/16 18-9/16 8-11/16 85 7 SJO 3 2 12-11/32 37-1/4 10-7/8 4-3/4 7-1/4 5-25/32 7-7/32 22-3/8 9 140 Type H Figure 3 H B E (3) Closing Plates G A 2 4 NEMA Size I 2 SFO Table 16.57: H 2 4 3 G 2–3 F C Figure 4 Dimensions for NEMA 1 General Purpose Enclosure No. Fig. of Poles No. Dimensions—Inches A B 6 10 (4) I Dia. Mtg. Holes C 8502 8536 5-9/32 5-9/16 D E F G 3 7/8 8-1/8 1 H I J K L 5 — — 00 0 1 SAG SBG SCG All All All 3 3 3 2 SDG All 3 7-13/16 12-11/16 6-1/32 6-5/16 — 1-3/32 10-1/2 1-3/32 3 SEG All 3 11-7/16 21-13/16 8 8-3/8 — 1-17/32 18-3/4 1-17/32 1-17/32 8-3/8 7-3/4 1-17/32 8-3/8 9 9 4 SFG All 5 11-1/4 8-19/32 1-1/4 1-1/4 22-5/16 1-7/16 7/16 5 SGG All 5 17-7/32 44-7/32 12-13/16 12-15/16 13 2-1/8 2-1/8 6 SHG All 4 65-3/4 20-7/32 13-1/8 13-1/8 — 11 7 SJG All 4 93 34-1/2 23-1/2 23-1/2 40 64-1/2 2-5/16 B 1-3/32 5-5/8 5-3/4 1-3/32 5-5/8 — — — 2-1/8 9/16 — — — 5-1/2 — — — — G RESET E F D C H Figure 5 Floor Mounting 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 25-5/32 15/16 4-1/8 H A © 2009 Schneider Electric All Rights Reserved 16-23 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors and Starters—NEMA Rated Class 8502, 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Table 16.58: NEMA Size Class 8502 0 and 1 8536 NEMA 4 & 4X—Stainless Steel Watertight Enclosuresa No. of Poles Type SBW SCW SBW SCW Bot. Hub Only Top & Bot. Hub W X 3/4'' Dia. Hub 1'' Dia. Hub 3/4'' Dia. Hub 1-1/2'' Dia. Hub Dia. 2-9/16 3-3/16 7/16 3/4'' Hub 2-1/2'' Dia. Hub Dimensions—Inches All A B 6-3/8 7-1/8 C D E F 13-3/16 1-9/16 3-1/4 G 12 H I J 19/32 1-3/16 11-25/32 1-5/8 2-5/16 5/16 1-7/8 K L All 6-3/8 7-13/16 13-3/16 1-9/16 3-1/4 12 19/32 11-25/32 1-5/8 2-5/16 5/16 8502 SDW All 8-1/8 7-7/8 16-3/16 1-9/16 5 15 1-3/32 1-15/16 14-3/4 2 2-5/8 5/16 8536 SDW All 8-1/8 8-9/16 16-3/16 1-9/16 5 15 1-3/32 14-3/4 2 2-5/8 5/16 12 30-1/2 7/8 D A E B D G F 2 2-7/8 SEW 8502 3 and 4 All 18-5/32 8-3/4 32-7/32 3-5/64 3-11/16 26-23/32 SFW All 18-5/32 9-9/16 32-7/32 3-5/64 12 30-1/2 7/8 4-1/2 26-23/32 Dia. 2-9/16 3-3/16 7/16 3/4" Hub 2-1/2" Dia. Hub All 17-7/32 12-5/8 47-7/32 4-1/8 9 46 5/8 4-19/32 28-5/16 3-1/8 Dia. 5-3/4 9/16 3/4" Hub 3-1/2" Dia. Hub Dia. 4-19/32 30-13/16 2-11/16 4-1/2 9/16 3/4" Hub (2) 3" Dia. Hub SEW 8536 8502 & SGW 8536 5 8502 & SHW 8536 6a a G (4) "L" DIA. MTG.HOLES SFW 7a C All 20-7/32 12-1/8 65-7/32 4-1/8 12 64 5/8 8502 & SJW All 34-1/2 23-1/2 101 8536 Size 6 and 7 are sheet steel enclosures, and are rated NEMA 4 only. Table 16.59: NEMA Size W X J H K Floor Mounting NEMA 4 & 4X Watertight Enclosure NEMA 4 & 4X—Stainless Steel Watertight Enclosures with Form F4Tb Class Type No. of Poles A B All 12-5/8 7-1/8 SBW SCW SBW SCW 8502 0 and 1 I 8536 Dimensions—Inches C D E F 14-11/16 2-9/16 7-1/2 G H I J K L 13-1/2 19/32 3-3/16 18-13/16 1-21/32 2-5/16 5/16 All 12-5/8 7-13/16 14-11/16 2-9/16 7-1/2 8502 SDW All 14-7/8 7-9/16 16-5/16 2-9/16 9-3/4 13-1/2 19/32 15 21/32 3-3/16 3-7/8 18-13/32 1-21/32 2-5/16 5/16 20-7/8 2 2-5/8 5/16 8536 SDW All 14-7/8 8-1/4 16-5/16 2-9/16 9-3/4 15 21/32 20-7/8 2 2-5/8 5/16 2 3-7/8 SEW 2–3 8502 Same as Standard NEMA 4 dimensions, see above. 3 SFW 2–3 and SEW 2–3 4 8536 Same as Standard NEMA 4 dimensions, see above. SFW 2–3 5 8502 & 8536 SGW All Same as Standard NEMA 4 dimensions, see above. 6b 8502 & 8536 SHW All Form F4T is supplied as standard. Refer to page 16-110. 7b 8502 & 8536 SJW All b Size 6 and 7 are sheet steel enclosures, and are rated NEMA 4 only. Table 16.60: NEMA 4X—Watertight & Corrosion Resistant Glass Polyester Enclosures Size Type No. of Poles C D E F 0, 1 SBW SCW All 6-1/2 6-7/16 12-1/8 3/4 5 8-3/4 2 SDW All 8-1/2 7-1/16 13-7/8 3/4 7 Dimensions—Inches (see the figure below) A B A D E G H I J K Bot. Hub Only Top & Bot. Hub Weight (lbs.) L W X 1-11/16 3-11/32 10-1/16 1-5/16 2-1/8 5/16 3/4 1 17 10-1/2 1-11/16 3-29/32 11-15/16 1-5/8 5/16 3/4 1-1/2 22 2-3/8 B D 16 SIZE 2 ONLY G NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS F I C SIZE 2 ONLY (2) "L" DIA. MTG. HOLES (SIZE 1) (4) "L" DIA. MTG. HOLES (SIZE 2) J RESET G H K 1" CONDUIT HUB TOP & BOTTOM - SIZE 1 1 1/2" CONDUIT HUB TOP & BOTTOM - SIZE 2 3/4" CONDUIT HUB IN SIZE 1 & SIZE 2 16-24 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors and Starters—NEMA Rated Class 8502, 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Table 16.61: A NEMA 4X—Watertight & Corrosion Resistant Glass Polyester Enclosures NEMA Size Type A B C E F All 16-7/8 9-25/32 22-3/4 10-1/8 21-1/2 All 25-13/16 11-15/16 33-1/2 18-1/2 32-1/4 SBW SCW SDW SEW SFW 0-2a 3-4b E No. of Poles Dimensions—Inches (see the figure to the left) C F a With control power transformer (Form F4T) b Dimensions also for Form F4T. Note: Devices with Form F4T may use larger enclosure. Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) for dimensions. B Figure 1 (NEMA 4X) NEMA 7 & 9—Bolted Cover, Cast Iron See Figure 1 for dimensions for NEMA size 0 and 1 (weight is 59 pounds). See Figure 2 for NEMA size 2 (weight is 75 pounds). 11.00 279 9.75 248 9.25 235 4.90 125 .63 16 2.40 61 .63 16 (1) 1-11 1/2 Pipe Tap at Top Standard 7.00 .25 179 6 Optional Mounting .63 16 2.40 61 12.00 304 10.75 273 10.25 260 5.90 150 .63 16 (1) 1 1/2 - 11 1/2 Pipe Tap at Top Standard 7.50 .25 191 6 Optional Mounting 13.25 7.90 337 201 12.00 305 12.70 322 8.25 210 (1) 3/4 - 14 Pipe Tap at Bottom Standard 9.63 245 14.44 367 (4) .42 Dia. Mtg. Holes 10 (1) 1-11 1/2 Pipe Tap at Bottom Standard 13.75 15.00 349 381 9.25 235 (1) 3/4 - 14 Pipe Tap at Bottom Standard (4) .42 Dia. Mtg. Holes 10 (1) 1 1/2 - 11 1/2 Pipe Tap at Bottom Standard Figure 2 Size 2 Figure 1 Size 0 and 1 NEMA 7 & 9—SPIN TOP® Enclosure Table 16.62: Conduit Sizes Loc. A, B, C & D NEMA Size Std. 0–1 2 Dimensions—Inches (See Figure 3) 1-1/4 Type SBR SCR 1-1/2 SDR 3–4 2-1/2 5 4 Wt. (lbs.) F G H J K L M N P Q R S T 10-5/8 26 15-1/4 8 4-3/4 5-3/8 3-3/4 1-1/16 7-1/2 11 7-5/16 2-1/16 — — 70 13-7/8 30-1/2 19-1/4 8 4-3/4 5-1/4 3-3/4 1-1/16 7 18 9-3/8 2-3/4 — — 100 SER SFR 13-3/8 39-1/2 20-1/4 8 4-3/4 7-1/2 3-3/4 — 7-3/4 23 8-5/8 3 — — 165 195 SGR 19 53-1/2 27-3/4 — — 11-1/4 5-3/4 1/8 16 20-5/8 11-3/8 4-5/16 12 6-1/2 375 Top View E Rear View Space Required to Remove Top Cover N E Q Rear Seal R Threaded Cover Enclosure G A C B D F H S K L J T Circuit Breaker Operator Handle - Combination Form Only (Add 1 IN to overall width) M Mtg. Holes and/or Slots (3) NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Overload Reset P Space Required to Remove Bottom Cover 16 Figure 3 NEMA 7 & 9 SPIN TOP Enclosure © 2009 Schneider Electric All Rights Reserved 16-25 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Contactors and Starters—NEMA Rated Class 8502, 8536 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Table 16.63: V U NEMA 7 & 9—Bolted Cover, Cast Aluminum NEMA Size Type 0–1 Dimensions—Inches L N P Q, R S, T, U, V Z Dia. 12-1/4 8-7/8 4-1/2 11 2-3/8 3-1/8 1-1/2 75 12-1/4 19-1/4 9-5/8 11 2-3/8 3-1/8 1-1/2 115 10 16-1/4 19-1/4 9-5/8 12-5/8 2-3/8 3-3/4 2-1/2 180 13-3/4 22-1/2 27-1/2 13-3/4 15-3/8 3-7/16 4 4 500 G H J K SBT SCT 14-1/4 17-1/4 9-1/2 2 SDT 13-5/8 27-5/8 9-1/2 3–4 SET SFT 18-1/8 31-5/8 5 SGT 24-1/2 45-5/8 Q Wt. (lbs.) L H N R S T G Circuit Breaker Handle not supplied on Class 8502 or 8536 J P Mtg. for 4 Bolts Z 1/2" NPT for breather and drain K NEMA 7 & 9 Bolted Cover, Cast Aluminum Table 16.64: NEMA 12/3R—Dusttight Enclosure NEMA Size Type No. of Poles 0 SBA All 1 SCA All 2 SDA All 3 4 SEA SFA All All 5 SGA 6 SHA 7 SJA All Dimensions—Inches A B 6-3/8 8-17/32 8-1/8 9-9/32 C D 12-3/4 1-9/16 16 1-9/16 31-1/2 3-5/64 Weight (lbs.) E F G H I J Class 8502 3-1/4 12 3/8 3-9/16 12-1/4 5/16 15 5 15 1/2 3-9/16 15-3/8 5/16 22 23 7/16 65 69 68 73 12 30-1/2 1/2 4-1/2 16 18-5/32 9-9/16 All 17-7/32 13-7/16 47 4-1/8 9 46 1/2 5-13/32 28-5/16 9/16 160 177 All 20-7/32 13 65 4-1/8 12 64 1/2 30-7/8 11/16 228 233 34-1/2 23-1/2 93 — — 6-7/16 26-23/32 Class 8536 Floor Mounting D A E D G F C G B (4) J Dia. Mtg. Holes Table 16.65: NEMA 12/3R—Dusttight Enclosure With Form F4T NEMA Size Type No. of Poles 0 SBA All 1 SCA All 2 SDA All 3 SEA 2–3 4 SFA 2–3 5 SGA All 6 SHA All 7 SJA All Table 16.66: 16 No. Size Type of Poles NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS SBH 0, 1 SCH All I Dimensions—Inches A B C D E F G H I J 11-7/8 8 13-1/2 2-13/16 6-3/4 12-3/4 3/8 3-29/32 18-3/8 5/16 14-7/8 8-1/8 16 2-9/16 9-3/4 15 3/8 3-21/32 21-1/2 5/16 H NEMA 12 Same as Standard NEMA 12 dimensions, see above. Same as Standard NEMA 12 dimensions, see above. Form F4T is supplied as standard. Refer to page 16-110. NEMA 3R—Rainproof and Sleet Resistant Enclosures Dimensions—Inches C A B C D1 D2 E F G1 G2 H1 H2 J K 8-27/32 12-9/32 7-1/8 1-3/8 1-7/16 6 7-1/2 2-19/32 2-3/16 2-1/16 2-5/8 14-9/32 1-3/8 L 1-3/8 M 1-7/8 K.O. X K.O. Y 4-3/8 1-27/32 1/2 3/4 1 1/2 3/4 1 1/2 4-7/8 1-27/32 1 1-1/4 1-1/2 1 1-1/4 2 2-1/2 1/2 1 1-1/4 2 2-1/2 1/2 N P A E D1 P D2 N G1 F B G2 2 3 4 SDH SEH SFH 16-26 All All All 9-27/32 16-9/32 8-5/8 1-3/8 1-7/16 7 11-1/2 2-19/32 2-3/16 2-1/16 2-5/8 16-25/32 1-5/16 1-3/4 2-1/8 12-27/32 25-9/32 8-5/8 1-3/8 1-7/16 10 20-1/2 2-19/32 2-3/16 2-1/16 2-5/8 19-25/32 1-5/16 1-15/16 2-7/16 6-3/8 1-27/32 12-27/32 40-9/32 9-1/8 1-3/8 1-7/16 10 35-1/2 2-19/32 2-3/16 2-1/16 2-5/8 20-9/32 1-5/16 2-5/16 2-11/16 6-3/8 1-27/32 (4) .36 Dia. Mtg. Holes 9 (3) Closing Plates 3/4 J M X M 3/4 X K L Y H1 H2 NEMA 3R 3/4 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Vacuum Contactors 600 Volt Class 8502 / Refer to Catalog 8502CT9701 www.schneider-electric.us General Information Class 8502 Type W non-reversing vacuum contactors used to switch capacitors, transformers and electric motors where overload protection is separately provided. Type W vacuum contactors are designed for operation at 600 Volts, 50/60 Hz. (See page 16-49 for Class 8702 Reversing Vacuum Contactors.) Class 8502—Full Voltage 3 Pole Vacuum Contactors Locked Rotor Current (A) Enclosed Ampere Rating NEMA Size a Table 16.68: Type 4 5 6 3 3 3 91 WFO3a 3965.00 WGO3a 8004.00 WHO3a 22383.00 $ Price 240 V 220 V 480 V 440 V 600 V 550 V 120 120 120 240 240 240 480 480 480 600 600 600 732.00 1724.00 1904.00 Class 9999 Type $ Price Class 9999—Vacuum Contactor Kits Type WF–WG WH Size 4–5 6 WF WG–WH 4 5–6 WG 5 WH 6 Volts 50 Hz 60 Hz $ Price 120 V 110 V 9998WF 9998WG 9998WH For Use With Table 16.70: Type Suffix Number (Complete Coil Number Consists of Class and Type Followed by Suffix Number) Class & Type Poles WF WG WH Table 16.69: 40 50 100 100 75 100 200 200 150 200 400 400 Class 9998—Replacement Coils for Class 8502 and 8702 Vacuum Contactors (Includes Rectifier) Size Auxiliary Interlock Max. Hp 200 230 4 135 1080 460 575 200 230 5 270 2160 460 575 200 230 6 540 4320 460 575 Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection table below. Class 8502 Type WH 3.60 Open Type Motor Voltage Kit Description Auxiliary Contacts, Non-Convertible 1-N.O. & 1-N.C. Isolated Contacts Coil Circuit Auxiliary Contacts 1-N.O. & 1-N.C. Isolated Contacts, Delayed Break 1-N.C. Isolated Contact Lug Kits (6) lugs included Lug Kits (6) lugs included WX11 116.00 WCX11 WLX01 153.00 476.00 LUW5 261.00 LUW6 270.00 Coil Voltage Codes 110 V02 120 220 V03 V02 440 V06 V03 7.00 178 5.00 Front View Shown Without Cover Plate and Overtravel Gauge 240 480 550 V07 V06 V07 6.13 2.67 2.67 68 600 68 156 5.22 127 Coil Interlock 133 Line Term. 12.50 12.90 Overtravel Gauge 328 Term. Holes 1.44 1.44 37 118 33 3.72 94 2.63 2.63 67 67 7.90 201 Dimensions for Class 8502 Type WF Size 4 2.50 2.50 5.09 1.28 37 4.63 227 355 168 151 8.94 185 13.99 6.63 5.96 318 7.28 Dimensions for Class 8502 Type WH Size 6 129 Load Term. 5.93 151 1.45 37 64 64 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.67: 7.90 201 Dimensions for Class 8502 Type WG Size 5 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-27 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Vacuum Contactors 1500 Volt Class 8502 / Refer to Catalog 8502CT9701 www.schneider-electric.us General Information The Class 8502 Type V vacuum contactor is a three-pole, 1500 V rated device which meets UL508 (1.5 kV) and CSA. Vacuum technology offers long life and low maintenance in a compact, lightweight design. The contactor is suitable for contaminated atmospheres because the main contacts are sealed in vacuum bottles. Also, since gravity is not used to assist contactor operation, the Class 8502 contactor may be mounted in any plane without special modifications. Type V vacuum contactors are designed for the control of inductive or non-inductive loads at voltages between 200 and 1500 Vac. Table 16.71: Class 8502—Full Voltage 3 Pole Vacuum Contactors Class 8502 Type VH 3.60 Recess for Auxiliary Contact Overtravel Gauge 91 a Size Type 4 5 6 3 3 3 Type VF–VG VH Size 4–5 6 VF VG–VH 4 5–6 VG 5 VH 6 4.63 Table 16.74: 37 118 Volts 50 Hz 60 Hz Dimensions for Class 8502 Type VF Size 4 $ Price 110 V02 3965.00 8004.00 22383.00 240 Volts 220 Volts 240 240 240 480 Volts 440 Volts 480 480 480 $ Price 600 Volts 550 Volts 600 600 600 Kit Description Auxiliary Contacts, Non-Convertible 1 N.O. & 1 N.C. Isolated Contacts Coil Circuit Auxiliary Contacts 1 N.O. & 1 N.C. Isolated Contacts, Delayed Break 1 N.C. Isolated Contact Lug Kits (6) lugs included Lug Kits (6) lugs included Class 9999 Type $ Price WX11 116.00 WCX11 WLX01 153.00 476.00 LUW5 261.00 LUW6 1715.00 Coil Voltage Codes 120 220 V03 V02 240 440 V06 480 V03 550 V07 600 V06 V07 Line Terminals: Six 3/0 - 16 Tapped Holes 6.20 157 5.20 Line 7.00 178 132 14.00 1 8.00 16 Coil Terminal A 8.94 203 Mtg. 2 227 6.75 1 Coil Terminal A 2 Coil Terminal C NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 5.05 Load 6.75 Mtg. 128 2 Two Dual Circuit Auxiliary Contacts can be located on both sides of contactor. Coil Terminals B and D located on opposite side of contactor. 7.90 171 7.75 Load Terminals: Six 3/0 - 16 Tappe d Holes 197 1 201 356 171 Mtg. Line and Load Terminals: One .50 - 13 Tapped Hole Per Terminal Coil Terminal C 1 732.00 1724.00 1904.00 Class 9999—Vacuum Starter Kits 1.44 1.44 37 120 Volts 110 Volts 120 120 120 9998WF 9998WG 9998WH For Use With 168 Type Suffix Number (Complete Coil Number Consists of Class and Type Followed by Suffix Number) Class & Type Poles VF VG VH Table 16.73: 6.63 Max. Hp Class 9998—Replacement Coils for Class 8502 and 8702 (Contains Rectifier) 149 Front View Shown Without Overtravel Gauge Open Type Motor Voltage 200 50 230 60 460 125 4 160 1080 575 150 VFO3a 800 200 1000 250 1500 400 200 100 230 125 460 250 5 320 2160 575 300 VGO3a 800 400 1000 — 1500 800 200 150 230 200 460 400 6 540 4320 575 400 VHO3a 800 — 1000 — 1500 1300 Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection table below. Table 16.72: 5.87 Locked Rotor Current (A) Enclosed Ampere Rating NEMA Size Two Dual Circuit Auxiliary Contacts can be located on both sides of contactor. 5.75 146 Std. 178 2 Coil Terminals B and D located on opposite side of contactor. 7.00 Dimensions for Class 8502 Type VH Size 6 Dimensions for Class 8502 Type VG Size 5 For How to Order Information, see page 16-12. 16-28 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Vacuum Starters—NEMA Rated 600 Volt Class 8536 / Refer to Catalog 8538CT9701 www.schneider-electric.us General Information Class 8536 Type W non-reversing vacuum starters are used to switch electric motors where overload protection is not separately provided. Type W vacuum starters are designed for operation at 600 Volts, 50/60 Hz. Starters are available exclusively with Motor Logic® Feature Base Solid State Overload Relays. Table 16.75: Class 8536—Full Voltage Vacuum Starters Enclosed Ampere Rating NEMA Size Locked Rotor Current (A) Motor Voltage Open Type Max. Hp Type $ Price 200 40 230 50 4 135 1080 WFO3a 460 100 575 100 200 75 230 100 5 270 2160 WGO3a 460 200 575 200 200 150 230 200 6 540 4320 WHO3a 460 400 575 400 Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection table at left. a Table 16.76: Type 4 5 6 All All All 240 Volts 220 Volts 240 240 240 480 Volts 440 Volts 480 480 480 $ Price 600 Volts 550 Volts 600 600 600 732.00 1724.00 1904.00 Class 9999—Vacuum Starter Kits Type WF–WG WH Size 4–5 6 WF WG–WH 4 5–6 WG 5 110 V02 120 Volts 110 Volts 120 120 120 9998WF 9998WG 9998WH For Use With Volts 50 Hz 60 Hz 24008.00 Suffix Number (Complete Coil Number Consists of Class and Type Followed by Suffix Number) Class & Type Poles WF WG WH Table 16.78: 10125.00 Class 9998—Replacement Coils for Class 8536 Vacuum Starters Size Table 16.77: 4433.00 Kit Description Auxiliary Contacts, Non-Convertible 1 N.O. & 1 N.C. Isolated Contacts Coil Circuit Auxiliary Contacts 1 N.O. & 1 N.C. Isolated Contacts, Delayed Break 1 N.C. Isolated Contact Lug Kits (6) lugs included Class 9999 Type $ Price WX11 122.00 WCX11 WLX01 114.00 503.00 LUW5 275.00 Coil Voltage Codes 120 220 V03 240 V02 440 V06 V03 480 550 V07 600 V06 V07 8.59 1.13 29 218 4.30 109 3.28 83 8.59 218 .94 24 1.13 5.21 132 9.07 4.30 29 230 109 6.47 2.60 164 66 19.96 507 26.25 18.56 .42 11 17.77 451 13.06 332 12.21 16.37 11.20 310 667 471 416 284 .24 .88 1.75 22 6 (Reset Travel) .24 3.62 4.28 109 44 7.25 92 6 (Reset Travel) 7.84 199 8.74 222 184 Dimensions for Class 8536 Type WF Size 4 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS .24 6 (Reset Travel) Reset Reset Dimensions for Class 8536 Type WG Size 5 Dimensions for Class 8536 Type WH Size 6 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-29 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters— NEMA Rated Fusible Disconnect Switch Type Class 8538 / Refer to Catalog 8538CT9701 www.schneider-electric.us General Information Class 8538 and 8539 Type S combination starters combine the requirements of motor overload and short circuit protection into one package. These starters are manufactured in accordance with NEMA standards and are UL Listed (although some Form numbers may not be listed—contact your local Square D representative for information). Class 8538 and 8539 combination starters are designed to operate at 600 Vac maximum, 50 to 60 Hz—and are supplied with melting alloy overload relays as standard. 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. For class J fuse clip, use Form Y1072 (no charge). Table 16.79: Fusible Full Voltage Type (Class H Fuse Clips), with Melting Alloy Overload Relays Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase NEMA Size 3 5 0 7-1/2 10 20 25 40 75 150 3 5 200 (208) Schneider Electric offers express shipping for factory modified NEMA Combo Starters. When you need them fast, our Laser™ Delivery program is the answer to getting your product when you need it most. Ask for Laser™ Delivery, then select the product and the modifications you need when you place your order. It’s as easy as that! 1 2 3 4 5 6 0 7-1/2 1 Fuse Clip Size (A) NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) (Sizes 0-5)c NEMA 1 General Purpose Enclosure NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure NEMA 12/3Rb Dusttight and Driptight Industrial Use Enclosure With External Reset Without External Reset $ Price Type $ Price Type $ Price Type $ Price Type Type 30 30 SBG12a SCG12a 1344.00 1416.00 SBW12a SCW12a 2712.00 2781.00 SBW22a SCW22a 3123.00 3195.00 SBA22a SCA22a SBA12a SCA12a 1686.00 1758.00 60 SCG13a 1443.00 SCW13a 2811.00 SCW23a 3239.00 SCA23a SCA13a 1785.00 60 100 200 200 400 600 30 30 SDG12a SEG15a SEG12a SFG15a SGG15a SHG13a SBG12a SCG12a 2228.00 3752.00 4064.00 7199.00 16122.00 42305.00 1344.00 1416.00 SDW12a SEW15a SEW12a SFW15a SGW15a SHW13a SBW12a SCW12a 4334.00 7425.00 7739.00 11898.00 28112.00 54077.00 2712.00 2781.00 SDW22a SEW25a — — — — SBW22a SCW22a 4778.00 8166.00 — — — — 3123.00 3195.00 SDA22a SEA25a SEA22a SFA25a SGA25a SHA23a SBA22a SCA22a SDA12a SEA15a SEA12a SFA15a SGA15a SHA13a SBA12a SCA12a 2712.00 4377.00 4692.00 8936.00 20336.00 47219.00 1686.00 1758.00 60 SCG13a 1443.00 SCW13a 2811.00 SCW23a 3239.00 SCA23a SCA13a 1785.00 15 2 60 SDG12a 2228.00 SDW12a 4334.00 SDW22a 4778.00 SDA22a SDA12a 2712.00 230 25 100 SEG15a 3752.00 SEW15a 7425.00 SEW25a 8166.00 SEA25a SEA15a 4377.00 (240) 3 30 200 SEG12a 4064.00 SEW12a 7739.00 — — SEA22a SEA12a 4692.00 50 4 200 SFG15a 7199.00 SFW15a 11898.00 — — SFA25a SFA15a 8936.00 100 5 400 SGG15a 16122.00 SGW15a 28112.00 — — SGA25a SGA15a 20336.00 200 6 600 SHG13a 42305.00 SHW13a 54077.00 — — SHA23a SHA13a 47219.00 5 0 30 SBG13a 1344.00 SBW13a 2712.00 SBW23a 3123.00 SBA23a SBA13a 1686.00 10 1 30 SCG14a 1443.00 SCW14a 2811.00 SCW24a 3239.00 SCA24a SCA14a 1785.00 15 30 SDG16a 2241.00 SDW16a 4350.00 SDW26a 4791.00 SDA26a SDA16a 2712.00 2 25 60 SDG14a 2271.00 SDW14a 4377.00 SDW24a 4820.00 SDA24a SDA14a 2754.00 460 (480) 50 3 100 SEG13a 3824.00 SEW13a 7497.00 SEW23a 8244.00 SEA23a SEA13a 4449.00 100 4 200 SFG13a 7254.00 SFW13a 11955.00 — — SFA23a SFA13a 8991.00 200 5 400 SGG13a 16122.00 SGW13a 28112.00 — — SGA23a SGA13a 20336.00 400 6 600 SHG12a 42305.00 SHW12a 54077.00 — — SHA22a SHA12a 47219.00 5 0 30 SBG13a 1344.00 SBW13a 2712.00 SBW23a 3123.00 SBA23a SBA13a 1686.00 10 1 30 SCG14a 1443.00 SCW14a 2811.00 SCW24a 3239.00 SCA24a SCA14a 1785.00 15 30 SDG16a 2241.00 SDW16a 4350.00 SDW26a 4791.00 SDA26a SDA16a 2712.00 2 25 60 SDG14a 2271.00 SDW14a 4377.00 SDW24a 4820.00 SDA24a SDA14a 2754.00 575 (600) 50 3 100 SEG13a 3824.00 SEW13a 7497.00 SEW23a 8244.00 SEA23a SEA13a 4449.00 100 4 200 SFG13a 7254.00 SFW13a 11955.00 — — SFA23a SFA13a 8991.00 200 5 400 SGG13a 16122.00 SGW13a 28112.00 — — SGA23a SGA13a 20336.00 400 6 600 SHG12a 42305.00 SHW12a 54077.00 — — SHA22a SHA12a 47219.00 a Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown on page 16-31. b NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. c NEMA Size 6 starters are NEMA 4 painted sheet steel enclosures. Note: Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. Table 16.80: 16 Motor Voltage Fusible Disconnect Switch Type (Class H Fuse Clips), Single Phaseef Fuse Clip Max. Coil NEMA Size Hp Voltage Size Poles (A) NEMA 1 General Purpose Enclosure NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Type 120 240 d e f 1 2 3 2 3 7-1/2 $ Price NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) Type $ Price NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure Type $ Price NEMA 12/3Rd Dusttight and Driptight Industrial Use Enclosure With External Reset Without External Reset Type Type $ Price 120 0 1 2 2 30 30 60 SBG62V02 SCG62V02 SDG62V02 1344. 1416. 2228. SBW62V02 SCW62V02 SDW62V02 2712. 2781. 4334. SBW65V02 SCW65V02 SDW65V02 3123. 3195. 4778. SBA65V02 SCA65V02 SDA65V02 SBA62V02 SCA62V02 SDA62V02 1686. 1758. 2712. 240 0 1 2 2 30 30 60 SBG62V03 SCG62V03 SDG62V03 1344. 1416. 2228. SBW62V03 SCW62V03 SDW62V03 2712. 2781. 4334. SBW65V03 SCW65V03 SDW65V03 3123. 3195. 4778. SBA65V03 SCA65V03 SDA65V03 SBA62V03 SCA62V03 SDA62V03 1686. 1758. 2712. NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Single phase units require one thermal unit and are not available with Form Hxx—Solid State Overload Relays. Not included in Laser™ Delivery program. For How to Order Information, see page 16-12. 16-30 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters— NEMA Rated Non-Fusible Disconnect Switch Type Class 8538 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50-60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.81: Non-Fusible Full Voltage Type, Non-Reversing, with Melting Alloy Overload Relays Ratings 460 (480) 575 (600) 240 a b c d e Note: 1 2 3 Coil Voltage Max. Hp Motor Voltage Table 16.82: Type SBG11c SCG11c SDG11c SEG11c SFG11c SGG11c SHG11c SBG11c SCG11c SDG11c SEG11c SFG11c SGG11c SHG11c SBG11c SCG11c SDG11c SEG11c SFG11c SGG11c SHG11c SBG11c SCG11c SDG11c SEG11c SFG11c SGG11c SHG11c 0 1 2 3 4 5 6 0 1 2 3 4 5 6 0 1 2 3 4 5 6 0 1 2 3 4 5 6 $ Price 1301.00 1373.00 2169.00 3609.00 6956.00 15609.00 41174.00 1301.00 1373.00 2169.00 3609.00 6956.00 15609.00 41174.00 1301.00 1373.00 2169.00 3609.00 6956.00 15609.00 41174.00 1301.00 1373.00 2169.00 3609.00 6956.00 15609.00 41174.00 NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) (Sizes 0–5)b NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure Type SBW11c SCW11c SDW11c SEW11c SFW11c SGW11c SHW11c SBW11c SCW11c SDW11c SEW11c SFW11c SGW11c SHW11c SBW11c SCW11c SDW11c SEW11c SFW11c SGW11c SHW11c SBW11c SCW11c SDW11c SEW11c SFW11c SGW11c SHW11c Type SBW21c SCW21c SDW21c SEW21c — — — SBW21c SCW21c SDW21c SEW21c — — — SBW21c SCW21c SDW21c SEW21c — — — SBW21c SCW21c SDW21c SEW21c — — — $ Price 2669.00 2739.00 4278.00 7284.00 11655.00 27599.00 52568.00 2669.00 2739.00 4278.00 7284.00 11655.00 27599.00 52568.00 2669.00 2739.00 4278.00 7284.00 11655.00 27599.00 52568.00 2669.00 2739.00 4278.00 7284.00 11655.00 27599.00 52568.00 NEMA 12/3Ra Dusttight and Driptight Industrial Enclosure $ Price 3068.00 3153.00 4706.00 8010.00 — — — 3068.00 3153.00 4706.00 8010.00 — — — 3068.00 3153.00 4706.00 8010.00 — — — 3068.00 3153.00 4706.00 8010.00 — — — With External Reset Without External Reset $ Price Type SBA21c SCA21c SDA21c SEA21c SFA21c SGA21c SHA21c SBA21c SCA21c SDA21c SEA21c SFA21c SGA21c SHA21c SBA21c SCA21c SDA21c SEA21c SFA21c SGA21c SHA21c SBA21c SCA21c SDA21c SEA21c SFA21c SGA21c SHA21c Type SBA11c SCA11c SDA11c SEA11c SFA11c SGA11c SHA11c SBA11c SCA11c SDA11c SEA11c SFA11c SGA11c SHA11c SBA11c SCA11c SDA11c SEA11c SFA11c SGA11c SHA11c SBA11c SCA11c SDA11c SEA11c SFA11c SGA11c SHA11c 1643.00 1715.00 2654.00 4235.00 8693.00 19823.00 45710.00 1643.00 1715.00 2654.00 4235.00 8693.00 19823.00 45710.00 1643.00 1715.00 2654.00 4235.00 8693.00 19823.00 45710.00 1643.00 1715.00 2654.00 4235.00 8693.00 19823.00 45710.00 Non-Fusible Disconnect Switch Type, Single Phasede NEMA Size 230 (240) 120 NEMA Size 3 7-1/2 10 25 40 75 150 3 7-1/2 15 30 50 100 200 5 10 25 50 100 200 400 5 10 25 50 100 200 400 200 (208) Refer to page 16-30 for details. Max. Hp Polyphase Poles Motor Voltage (Starter Voltage) NEMA 1 General Purpose Enclosure 120 0 1 2 2 2 3 240 7-1/2 0 1 2 2 NEMA 1 General Purpose Enclosures NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure NEMA 12/3Ra Dusttight and Driptight Industrial Enclosure With External Reset Without External Reset $ Price Type SBG61V02 SCG61V02 SDG61V02 $ Price 1301.00 1373.00 2169.00 Type SBW61V02 SCW61V02 SDW61V02 $ Price 2669.00 2739.00 4278.00 Type SBW64V02 SCW64V02 SDW64V02 $ Price 3068.00 3153.00 4706.00 Type SBA64V02 SCA64V02 SDA64V02 Type SBA61V02 SCA61V02 SDA61V02 1643.00 1715.00 2654.00 SBG61V03 SCG61V03 SDG61V03 1301.00 1373.00 2169.00 SBW61V03 SCW61V03 SDW61V03 2669.00 2739.00 4278.00 SBW64V03 SCW64V03 SDW64V03 3068.00 3153.00 4706.00 SBA64V03 SCA64V03 SDA64V03 SBA61V03 SCA61V03 SDA61V03 1643.00 1715.00 2654.00 NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. NEMA Size 6 starters are NEMA 4 painted sheet steel enclosure. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Single phase units require one thermal unit and are not available with Form Hxx—Solid State Overload Relays. Not included in Laser™ Delivery program. Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. Table 16.83: Coil Voltage Codes Voltage 60 Hz 24gf 120g 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 f 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified(i.e., order as 8538SBG11V01S). These voltage codes must include Form S (supplied at no charge). When specifying Form S, please supply motor voltage when ordering (i.e., order as 8538SCG11V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS g 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-31 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters— NEMA Rated Fusible Disconnect Switch Type with Class R Fuse Clips Class 8538 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase – 600 Vac Maximum – 50-60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.84: Fusible (with Class R Fuse Clips) Full Voltage Type, Non-Reversing, with Melting Alloy Overload Relays—(100,000 AIC Rated) Fuse Clip Size (A) NEMA Size NEMA 1 General Purpose Enclosure Type $ Price Type NEMA 12/3Ra Dusttight and Driptight Industrial Enclosure NEMA 4 & 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) (Sizes 0–5)c $ Price Type $ Price With External Reset Without External Reset Type Type $ Price 1709.00 3 0 30 SBG32b 1367.00 SBW32b 2732.00 SBW42b 3140.00 SBA42b SBA32b 1778.00 5 1 30 SCG32b 1436.00 SCW32b 2804.00 SCW42b 3225.00 SCA42b SCA32b 1808.00 7-1/2 1 60 SCG33b 1466.00 SCW33b 2834.00 SCW43b 3252.00 SCA43b SCA33b 2732.00 10 2 60 SDG32b 2249.00 SDW32b 4356.00 SDW42b 4791.00 SDA42b SDA32b 200 4419.00 20 3 100 SEG35b 3794.00 SEW35b 7469.00 SEW45b 8216.00 SEA45b SEA35b (208) SEA32b 4734.00 25 3 200 SEG32b 4108.00 SEW32b 7781.00 — — SEA42b SFA35b 8978.00 40 4 200 SFG35b 7241.00 SFW35b 11942.00 — — SFA45b SGA35b 20435.00 75 5 400 SGG35b 16221.00 SGW35b 28214.00 — — SGA45b SHA33b 47696.00 150 6 600 SHG33b 42782.00 SHW33b 54176.00 — — SHA43b 1709.00 3 0 30 SBG32b 1367.00 SBW32b 2732.00 SBW42b 3140.00 SBA42b SBA32b 1778.00 5 1 30 SCG32b 1436.00 SCW32b 2804.00 SCW42b 3225.00 SCA42b SCA32b SCA33b 1808.00 7-1/2 1 60 SCG33b 1466.00 SCW33b 2834.00 SCW43b 3252.00 SCA43b SDA32b 2732.00 15 2 60 SDG32b 2249.00 SDW32b 4356.00 SDW42b 4791.00 SDA42b 230 SEA35b 4419.00 25 3 100 SEG35b 3794.00 SEW35b 7469.00 SEW45b 8216.00 SEA45b (240) SEA32b 4734.00 30 3 200 SEG32b 4108.00 SEW32b 7781.00 — — SEA42b SFA35b 8978.00 50 4 200 SFG35b 7241.00 SFW35b 11942.00 — — SFA45b SGA35b 20435.00 100 5 400 SGG35b 16221.00 SGW35b 28214.00 — — SGA45b SHA33b 47696.00 200 6 600 SHG33b 42782.00 SHW33b 54176.00 — — SHA43b 5 0 30 SBG33b 11394.00 SBW33b 2762.00 SBW43b 3176.00 SBA43b SBA33b 1736.00 10 1 30 SCG34b 1466.00 SCW34b 2834.00 SCW44b 3252.00 SCA44b SCA34b 1808.00 15 2 30 SDG36b 2262.00 SDW36b 4370.00 SDW46b 4805.00 SDA46b SDA36b 2748.00 460 25 2 60 SDG34b 2291.00 SDW34b 4400.00 SDW44b 4841.00 SDA44b SDA34b 2775.00 (480) 50 3 100 SEG33b 3866.00 SEW33b 7541.00 SEW43b 8294.00 SEA43b SEA33b 4491.00 100 4 200 SFG33b 7298.00 SFW33b 11997.00 — — SFA43b SFA33b 9035.00 200 5 400 SGG33b 16221.00 SGW33b 28214.00 — — SGA43b SGA33b 20435.00 400 6 600 SHG32b 42782.00 SHW32b 54176.00 — — SHA42b SHA32b 47696.00 5 0 30 SBG33b 11394.00 SBW33b 2762.00 SBW43b 3176.00 SBA43b SBA33b 1736.00 10 1 30 SCG34b 1466.00 SCW34b 2834.00 SCW44b 3252.00 SCA44b SCA34b 1808.00 15 2 30 SDG36b 2262.00 SDW36b 4370.00 SDW46b 4805.00 SDA46b SDA36b 2748.00 575 25 2 60 SDG34b 2291.00 SDW34b 4400.00 SDW44b 4841.00 SDA44b SDA34b 2775.00 (600) 50 3 100 SEG33b 3866.00 SEW33b 7541.00 SEW43b 8294.00 SEA43b SEA33b 4491.00 100 4 200 SFG33b 7298.00 SFW33b 11997.00 — — SFA43b SFA33b 9035.00 200 5 400 SGG33b 16221.00 SGW33b 28214.00 — — SGA43b SGA33b 20435.00 400 6 600 SHG32b 42782.00 SHW32b 54176.00 — — SHA42b SHA32b 47696.00 a NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. b Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. c NEMA Size 6 starters are NEMA 4 painted sheet steel enclosures. Note: Some control transformers may require the use of oversized enclosures. Refer to the control transformer selection table on page 16-40. Fuse Clip Size (A) Fusible Disconnect Switch Type (Class R Fuses), Single Phasede Poles Coil Voltage Max. Hp Motor Voltage Table 16.85: NEMA Size Refer to page 16-30 for details. Max. Hp Polyphase Motor Voltage (Starter Voltage) Ratings NEMA 1 General Purpose Enclosure Type 120 240 d e 1 2 3 $ Price NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel Type $ Price NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure NEMA 12/3R Dusttight and Driptight Industrial Use Enclosure With Without External Reset External Reset Type $ Price Type Type $ Price 120 0 1 2 2 30 30 60 SBG63V02 SCG63V02 SDG63V02 1367.00 SBW63V02 1436.00 SCW63V02 2249.00 SDW63V02 2732.00 2804.00 4356.00 SBW66V02 SCW66V02 SDW66V02 3140.00 3225.00 4791.00 SBA66V02 SCA66V02 SDA66V02 SBA63V02 SCA63V02 SDA63V02 1709.00 1178.00 2732.00 2 3 240 7-1/2 0 1 2 2 30 30 60 SBG63V03 SCG63V03 SDG63V03 1367.00 SBW63V03 1436.00 SCW63V03 2249.00 SDW63V03 2732.00 2804.00 4356.00 SBW66V03 SCW66V03 SDW66V03 3140.00 3225.00 4791.00 SBA66V03 SCA66V03 SDA66V03 SBA63V03 SCA63V03 SDA63V03 1709.00 1178.00 2732.00 Single phase units require one thermal unit and are not available with Form Hxx—Solid State Overload Relays. Not included in Laser™ Delivery program. Table 16.86: Coil Voltage Codes 16 Voltage NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 60 Hz 24gf 120g 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 f 24 V coils are not available on Sizes 4–7. On Sizes 00-3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8538SBG32V01S). g These voltage codes must include Form S (supplied at no charge). When specifying Form S, please supply motor voltage when ordering (i.e., order as 8538SCG32V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. For How to Order Information, see page 16-12. 16-32 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters—NEMA Rated Class 8538 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Full Voltage Type With Melting Alloy Overload Relays Note that prices shown do not include thermal units. Devices require 3 thermal units, standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.87: Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase NEMA Size Fuse Clip Size (A) Type 3 0 N/A 7-1/2 1 N/A 15 2 N/A 5 0 N/A 460 10 1 N/A (480) 25 2 N/A 5 0 N/A 575 10 1 N/A (600) 25 2 N/A Class 8538 Fusible Disconnect Switch Type—NEMA Size 0–2bg 3 0 30 With External Reset Without External Reset $ Price $ Price Type $ Price Type Type SBG11S8c SCG11S8c SDG11S8c SBG11S8c SCG11S8c SDG11S8c SBG11S8c SCG11S8c SDG11S8c 1656.00 1728.00 2528.00 1656.00 1728.00 2528.00 1656.00 1728.00 2528.00 1656.00 1728.00 2528.00 SBW11S8c SCW11S8c SDW11S8c SBW11S8c SCW11S8c SDW11S8c SBW11S8c SCW11S8c SDW11S8c SBW11S8c SCW11S8c SDW11S8c 3738.00 3807.00 3564.00 3738.00 3807.00 3564.00 3738.00 3807.00 3564.00 3738.00 3807.00 3564.00 SBA21S8c SCA21S8c SDA21S8c SBA21S8c SCA21S8c SDA21S8c SBA21S8c SCA21S8c SDA21S8c SBA21S8c SCA21S8c SDA21S8c SBA11S8c SCA11S8c SDA11S8c SBA11S8c SCA11S8c SDA11S8c SBA11S8c SCA11S8c SDA11S8c SBA11S8c SCA11S8c SDA11S8c 2285.00 2327.00 2178.00 2285.00 2327.00 2178.00 2285.00 2327.00 2178.00 2285.00 2327.00 2178.00 Class 8538 Non-Fusible Disconnect Switch Type—NEMA Size 0–2bg 3 0 N/A SBG11S8c 200 7-1/2 1 N/A SCG11S8c (208) 10 2 N/A SDG11S8c 230 (240) NEMA 12/3Ra Dusttight and Driptight Industrial Use Enclosure NEMA 4 & 4X Watertight and Dustight Enclosure Stainless Steel (304) NEMA 1 General Purpose Enclosure SBG12S8c 1700.00 SBW12S8c 3780.00 SBA22S8c SBA12S8c 2327.00 1 1 30 60 SCG12S8c SCG13S8c 1772.00 1800.00 SCW12S8c SCW13S8c 3851.00 3879.00 SCA22S8c SCA23S8c SCA12S8c SCA13S8c 2370.00 2399.00 10 3 2 0 60 30 SDG12S8c SBG12S8c 2583.00 1700.00 SDW12S8c SBW12S8c 5403.00 3780.00 SDA22S8c SBA22S8c SDA12S8c SBA12S8c 3324.00 2327.00 5 7-1/2 1 1 30 60 SCG12S8c SCG13S8c 1772.00 1800.00 SCW12S8c SCW13S8c 3851.00 3879.00 SCA22S8c SCA23S8c SCA12S8c SCA13S8c 2370.00 2399.00 15 2 60 SDG12S8c 2583.00 5 0 30 SBG13S8c 1728.00 460 10 1 30 SCG14S8c 1800.00 (480) 15 2 30 SDG16S8c 2597.00 25 2 60 SDG14S8c 2627.00 5 0 30 SBG13S8c 1728.00 575 10 1 30 SCG14S8c 1800.00 (600) 15 2 30 SDG16S8c 2597.00 25 2 60 SDG14S8c 2627.00 Class 8538 Fusible Disconnect Switch Type with Class R Fuse Clips—NEMA Size 0–2bg 3 0 30 SBG32S8c 1722.00 SDW12S8c SBW13S8c SCW14S8c SDW16S8c SDW14S8c SBW13S8c SCW14S8c SDW16S8c SDW14S8c 5403.00 3807.00 3879.00 5418.00 5445.00 3807.00 3879.00 5418.00 5445.00 SDA22S8c SBA23S8c SCA24S8c SDA26S8c SDA24S8c SBA23S8c SCA24S8c SDA26S8c SDA24S8c SDA12S8c SBA13S8c SCA14S8c SDA16S8c SDA14S8c SBA13S8c SCA14S8c SDA16S8c SDA14S8c 3324.00 2357.00 2399.00 3338.00 3366.00 2357.00 2399.00 3338.00 3366.00 200 (208) 5 7-1/2 230 (240) 200 (208) 230 (240) SBW32S8c 3753.00 SBA42S8c SBA32S8c 2348.00 5 7-1/2 1 1 30 60 SCG32S8c SCG33S8c 1794.00 1821.00 SCW32S8c SCW33S8c 3873.00 3900.00 SCA42S8c SCA43S8c SCA32S8c SCA33S8c 2390.00 2420.00 10 3 2 0 60 30 SDG32S8c SBG32S8c 2604.00 1722.00 SDW32S8c SBW32S8c 5426.00 3753.00 SDA42S8c SBA42S8c SDA32S8c SBA32S8c 3344.00 2348.00 5 7-1/2 1 1 30 60 SCG32S8c SCG33S8c 1794.00 1821.00 SCW32S8c SCW33S8c 3873.00 3900.00 SCA42S8c SCA43S8c SCA32S8c SCA33S8c 2390.00 2420.00 SDW32S8c SBW33S8c SCW34S8c SDW36S8c SDW34S8c SBW33S8c SCW34S8c SDW36S8c SDW34S8c 5426.00 3830.00 3900.00 5439.00 5468.00 3830.00 3900.00 5439.00 5468.00 SDA42S8c SBA43S8c SCA44S8c SDA46S8c SDA44S8c SBA43S8c SCA44S8c SDA46S8c SDA44S8c SDA32S8c SBA33S8c SCA34S8c SDA36S8c SDA34S8c SBA33S8c SCA34S8c SDA36S8c SDA34S8c 3344.00 2376.00 2420.00 3360.00 3387.00 2376.00 2420.00 3360.00 3387.00 15 2 60 SDG32S8c 2604.00 5 0 30 SBG33S8c 1751.00 460 10 1 30 SCG34S8c 1821.00 (480) 15 2 30 SDG36S8c 2619.00 25 2 60 SDG34S8c 2646.00 5 0 30 SBG33S8c 1751.00 575 10 1 30 SCG34S8c 1821.00 (600) 15 2 30 SDG36S8c 2619.00 25 2 60 SDG34S8c 2646.00 a NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-serviceTable entrance-rated applications; see page 16-104 for more information. b For NEMA Size 3–5 starters in oversized NEMA 1, 4 or 12 enclosures, contact factory for pricing and TAG number. c Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown to the right. Note: Some control transformers may require the use of oversized enclosures. Refer to the control transformer selection table on page 16-40. . Voltage Code $ Price Adder 60 Hz 50 Hz 24fe — V01 No Charge 120f 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge 277 — V04 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 e 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8538SBG1158V01S). f These voltage codes must include Form S (supplied at no charge). When specifying Form S, supply motor voltage when ordering (i.e., order as 8538SCG1158V02S). g Not included in Laser™ Delivery program. Note: For voltage codes used with control transformers, see page 16-110. Class 8538 Fusible Disconnect Switch Type for Horizontal Mountingg NEMA 12/3Ra Dusttight and Driptight Industrial Use Enclosure Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase NEMA Size 200 (208) 2 7-1/2 1 230 (240) 2 7-1/2 1 With External Reset Without External Reset Type Type 30 60 SCA22S1d SCA23S1d SCA12S1d SCA13S1d 1754.00 1781.00 30 60 SCA22S1d SCA23S1d SCA12S1d SCA13S1d 1754.00 1781.00 Fuse Clip Size (A) Coil Voltage Codes $ Price For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16 460 10 1 30 SCA24S1d SCA14S1d 1781.00 (480) 575 10 1 30 SCA24S1d SCA14S1d 1781.00 (600) d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection Table 16.89. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.88: 16.89: 16-33 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters—NEMA Rated Class 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us Mag-Gard® Circuit Breaker 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units (Sizes 00–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.90: Full Voltage Type, Non-Reversing, with Melting Alloy Overload Relay NEMA 1 General Purpose Enclosure Motor Voltage (Starter Voltage) Ratings 200 (208) NEMA 4 & 4X Watertight Dusttight and Corrosion Resistant Polyester Enclosure NEMAs 7 & 9 For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G (Cast Aluminum) Division 1 & 2 NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure Circuit Breaker (See Page 7-32 for Breaker Adjustment Range) Type 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41d SBG42d SBG43d 1814.00 SBW41d SBW42d SBW43d SBW51d 3182.00 SBW52d SBW53d 3653.00 SBR41d SBR42d SBR43d SBT41d 3843.00 SBT42d SBT43d SBA51d 3843.00 SBA52d SBA53d SBA41d SBA42d SBA43d 2156.00 1/4–1/3 1/2–1 1-1/2–3 5 7-1/2 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 GJL36050M05 SCG41d SCG42d SCG43d SCG44d SCG45d 1886.00 SCW41d SCW42d SCW43d SCW44d SCW45d SCW51d SCW52d 3252.00 SCW53d SCW54d SCW55d 3738.00 SCR41d SCR42d SCR43d SCR44d SCR45d SCT41d SCT42d 3936.00 SCT43d SCT44d SCT45d SCA51d SCA52d 3936.00 SCA53d SCA54d SCA55d SCA41d SCA42d SCA43d SCA44d SCA45d 2228.00 1-1/2–3 5 7-1/2–10 2 GJL36015M03 GJL36030M04 GJL36050M05 SDG41d SDG42d SDG43d 2669.00 SDW41d SDW42d SDW43d SDW51d 4778.00 SDW52d SDW53d 5255.00 SDR41d SDR42d SDR43d SDT41d 5255.00 SDT42d SDT43d SDA51d 5255.00 SDA52d SDA53d SDA41d SDA42d SDA43d 3153.00 FAL3610018M KAL3625025M KAL3625026M KAL3625030M LAL3640032M LAL3640033M LAL3640036M MAL3660040M MAL3660042M SEG42d 3879.00 SFG42d 8508.00 SFG43d SGG42d SGG44d 19724.00 SGG45d SHG43d SHG44d 42825.00 SHG45d SEW42d SFW42d SFW43d SGW42d SGW44d SGW45d SHW43d SHW44d SHW45d 7554.00 SEW52d 8310.00 13208.00 SFW52d SFW53d 14534.00 — 31716.00 — — — — 49946.00 — — — SER42d SFR42d SFR43d SGR42d SGR44d SGR45d — — — Hp Range Polyphase NEMA Size 1/4–1/3 1/2–1 1-1/2–3 15–25 30 40 50 60 75 100 125 150 230 (240) NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) (Sizes 0–5)a 3 4 5 6 $ Price Type $ Price Type $ Price TOP® SPIN Type $ Price Bolted Type b With External Reset Without External Reset Type Type $ Price 8679.00 SET42d 8679.00 13521.00 SFT42d SFT43d 13521.00 SGT42d 29381.00 SGT44d 29381.00 SGT45d — — — — — $ Price SEA52d SFA52d SFA53d SGA52d SGA54d SGA55d SHA53d SHA54d SHA55d SEA42d 4505.00 SFA42d 10245.00 SFA43d SGA42d SGA44d 22859.00 SGA45d SHA43d SHA44d 46670.00 SHA45d 1/4–1/3 1/2–1 1-1/2–3 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41d SBG42d SBG43d 1814.00 SBW41d SBW42d SBW43d SBW51d 3182.00 SBW52d SBW53d 3653.00 SBR41d SBR42d SBR43d SBT41d 3843.00 SBT42d SBT43d SBA51d 3843.00 SBA52d SBA53d SBA41d SBA42d SBA43d 2156.00 1/4–1/3 1/2–1 1-1/2–3 5–7-1/2 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 SCG41d SCG42d SCG43d SCG44d 1886.00 SCW41d SCW42d SCW43d SCW44d SCW51d 3182.00 SCW52d SCW53d SCW54d 3738.00 SCR41d SCR42d SCR43d SCR44d SCT41d 3936.00 SCT42d SCT43d SCT44d SCA51d 3936.00 SCA52d SCA53d SCA54d SCA41d SCA42d SCA43d SCA44d 2228.00 1-1/2–3 5–7-1/2 10 15 2 GJL36015M03 GJL36030M04 GJL36050M05 GJL36075M06 SDG41d SDG42d SDG43d SDG44d 2669.00 SDW41d SDW42d SDW43d SDW44d SDW51d 4778.00 SDW52d SDW53d SDW54d 5255.00 SDR41d SDR42d SDR43d SDR44d SDT41d 5255.00 SDT42d SDT43d SDT44d SDA51d 5255.00 SDA52d SDA53d SDA54d SDA41d SDA42d SDA43d SDA44d 3153.00 15–30 3 FAL3610018M SEG42d 3879.00 SEW42d 7554.00 SEW52d 8310.00 SER42d 8679.00 SET42d 8679.00 40 KAL3625026M SFG43d 8508.00 SFW43d 13208.00 SFW53d 14534.00 SFR43d SFT43d 13521.00 4 13521.00 50 KAL3625029M SFG44d SFW44d SFW54d SFR44d SFT44d 60 KAL3625031M SGG43d SGW43d — SGR43d SGT43d 75 5 LAL3640032M SGG44d 19724.00 SGW44d 31716.00 — — SGR44d 29381.00 SGT44d 29381.00 100 LAL3640035M SGG46d SGW46d — SGR46d SGT46d 125–150 MAL3660040M SHG44d 42825.00 SHW44d 49946.00 — — — 6 — — — 200 MAL3660044M SHG46d SHW46d — — — 250 MAL3680045M SJG42d SJW42d — — — 7 — — — 300 MAL36100047M SJG43d 57837.00 SJW43d 64958.00 — — — a NEMA Size 6 and 7 starters are NEMA 4 painted sheet steel enclosures. b NEMAs 7 and 9 bolted are not UL Listed. c NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Note: Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. Table 16.91: SEA52d SFA53d SFA54d SGA53d SGA54d SGA56d SHA54d SHA56d SJA52d SJA53d SEA42d SFA43d SFA44d SGA43d SGA44d SGA46d SHA44d SHA46d — — 4505.00 10245.00 22859.00 46670.00 61682.00 Coil Voltage Codes 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Voltage Code $ Price Adder 60 Hz 50 Hz 24fe — V01 No Charge 120f 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge 277 — V04 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 e 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8539SBG41V01S). f These voltage codes must include Form S (supplied at no charge). When specifying Form S, please supply motor voltage when ordering (i.e., order as 8539SCG41V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-41 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 Refer to page 16-30 for details. For How to Order Information, see page 16-12. 16-34 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters—NEMA Rated Class 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us Mag-Gard® Circuit Breaker 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units (Sizes 00–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Full Voltage Type, Non-Reversing, with Melting Alloy Overload Relays NEMA Type 1 General Purpose Enclosure Ratings Motor Voltage (Starter Voltage) Hp Range Polyphase NEMA Size Circuit Breaker (See Page 7-32 for Breaker Adjustment Range) Type $ Price NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) (Sizes 0–5)a Type $ Price NEMA 4 & 4X Watertight Dusttight and Corrosion Resistant Polyester Enclosure Type NEMAs 7 & 9 For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G (Cast Aluminum) Division 1 & 2 ® $ Price SPIN TOP $ Price Type Bolted Type b NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure $ Price 1/4–1 GJL36003M01 SBG41d SBW41d SBW51d SBR41d SBT41d 1-1/2–3 0 GJL36007M02 SBG42d 1814. SBW42d 3182. SBW52d 3653. SBR42d 3843. SBT42d 3843. 5 GJL36015M03 SBG43d SBW43d SBW53d SBR43d SBT43d 1/4–1 GJL36003M01 SCG41d SCW41d SCW51d SCR41d SCT41d 1-1/2–3 GJL36007M02 SCG42d 1 1886. SCW42d 3252. SCW52d 3738. SCR42d 3936. SCT42d 3936. 5–7-1/2 GJL36015M03 SCG43d SCW43d SCW53d SCR43d SCT43d 10 GJL36030M04 SCG44d SCW44d SCW54d SCR44d SCT44d 5–7-1/2 GJL36015M03 SDG41d SDW41d SDW51d SDR41d SDT41d 10–15 2 GJL36030M04 SDG42d 2669. SDW42d 4778. SDW52d 5255. SDR42d 5255. SDT42d 5255. 20–25 GJL36050M05 SDG43d SDW43d SDW53d SDR43d SDT43d 20–25 GJL36050M05 SEG41d 7554. SEW51d 8310. SER41d 8679. SET41d 8679. 3 3879. SEW41d 460 SEW52d SER42d SET42d 30–50 FAL3610018M SEG42d SEW42d (480) 60–75 KAL3625025M SFG42d SFW42d SFW52d SFR42d SFT42d 4 8508. SFW44d 13208. SFW54d 14534. SFR44d 13521. SFT44d 13521. 100 KAL3625029M SFG44d 125 KAL3625031M SGG43d SGW43d — SGR43d SGT43d 150 5 LAL3640032M SGG44d 19724. SGW44d 31716. — — SGR44d 29381. SGT44d 29381. 200 LAL3640033M SGG46d SGW46d — SGR46d SGT46d 250 LAL3640036M SHG43d SHW43d — — — 300 MAL3660040M SHG44d SHW44d — — — 6 — — — 350 MAL3660042M SHG45d 42825. SHW45d 49946. — — — 400 MAL3660044M SHG46d SHW46d — — — 500 MAL3690045M SJG42d — — — 7 57837. SJW42d 64958. — — — 600 MAL36100047M SJG43d SJW43d — — — 1/4–1 GJL36003M01 SBG41d SBW41d SBW51d SBR41d SBT41d 1-1/2–3 0 GJL36007M02 SBG42d 1814. SBW42d 3182. SBW52d 3653. SBR42d 3843. SBT42d 3843. 5 GJL36015M03 SBG43d SBW43d SBW53d SBR43d SBT43d 1/4–1 GJL36003M01 SCG41d SCW41d SCW51d SCR41d SCT41d 1-1/2–3 1 GJL36007M02 SCG42d 1886. SCW42d 3252. SCW52d 3738. SCR42d 3936. SCT42d 3936. 5–10 GJL36015M03 SCG43d SCW43d SCW53d SCR43d SCT43d 5–10 GJL36015M03 SDG41d SDW41d SDW51d SDR41d SDT41d 15–20 2 GJL36030M04 SDG42d 2669. SDW42d 4778. SDW52d 5255. SDR42d 5255. SDT42d 5255. 25 GJL36050M05 SDG43d SDW43d SDW53d SDR43d SDT43d 25–30 GJL36050M05 SEG41d 575 3 3879. SEW41d 7554. SEW51d 8310. SER41d 8679. SET41d 8679. 40–50 FAL3610018M SEG42d SEW42d SEW52d SER42d SET42d (600) 60–100 4 KAL3625025M SFG42d 8508. SFW42d 13208. SFW52d 14534. SFR42d 13521. SFT42d 13521. 125 KAL3625029M SGG41d SGW41d — SGR41d SGT41d 150 5 KAL3625030M SGG42d 19724. SGW42d 31716. — — SGR42d 29381. SGT42d 29381. 200 LAL3640032M SGG44d SGW44d — SGR44d SGT44d 250 LAL3640035M SHG42d SHW42d — — — 300 6 LAL3640036M SHG43d 42825. SHW43d 49946. — — — — — — 350–400 MAL3660040M SHG44d SHW44d — — — 500 MAL3680044M SJG41d SJW41d — — — 7 57837. SJW42d 64958. — — — 600 MAL3680045M SJG42d — — — a NEMA Size 6 and 7 starters are NEMA 4 painted sheet steel enclosures. b NEMA 7 and 9 bolted are not UL Listed. c NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Note: Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. Table 16.93: With External Reset Without External Reset Type Type SBA51d SBA52d SBA53d SCA51d SCA52d SCA53d SCA54d SDA51d SDA52d SDA53d SEA51d SEA52d SFA52d SFA54d SGA53d SGA54d SGA56d SHA53d SHA54d SHA55d SHA56d SJA52d SJA53d SBA51d SBA52d SBA53d SCA51d SCA52d SCA53d SDA51d SDA52d SDA53d SEA51d SEA52d SFA52d SGA51d SGA52d SGA54d SHA52d SHA53d SHA54d SJA51d SJA52d SBA41d SBA42d SBA43d SCA41d SCA42d SCA43d SCA44d SDA41d SDA42d SDA43d SEA41d SEA42d SFA42d SFA44d SGA43d SGA44d SGA46d SHA43d SHA44d SHA45d SHA46d — — SBA41d SBA42d SBA43d SCA41d SCA42d SCA43d SDA41d SDA42d SDA43d SEA41d SEA42d SFA42d SGA41d SGA42d SGA44d SHA42d SHA43d SHA44d — — $ Price 2156. 2228. 3153. 4505. 10245. 22859. 46670. 61682. 2156. 2228. 3153. 4505. 10245. 22859. 46670. 61682. Coil Voltage Codes Voltage 60 Hz 24fe 120f 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 Refer to page 16-30 for details. e 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8539SBG41V01S). f These voltage codes must include Form S (supplied at no charge). When specifying Form S, please supply motor voltage when ordering (i.e., order as 8539SCG41V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-41 Factory Modifications (Forms). . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . page 16-117 16 For How to Order Information, see page 16-12. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.92: © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-35 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Mag-Gard® Circuit Breakers in Oversized Enclosure, NEMA Size 0–2 Combination Starters— NEMA Rated www.schneider-electric.us Class 8539 / Refer to Catalog 8538CT9701 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.94: Mag-Gard® Circuit Breakers in Oversized Enclosure, NEMA Size 0–2bf Full Voltage Type, Non-Reversing with Melting Alloy Overload Relays Ratings Motor Voltage (Starter Voltage) 200 (208) 230 (240) 460 (480) 575 (600) Hp Range Polyphase NEMA Size 1/4–1/3 1/2–1 1-1/2–3 0 1/4–1/3 1/2–1 1-1/2–35 71/2 NEMA 1 General Purpose Enclosure Circuit Breaker (See Page 7-32 for Breaker Adjustment Range) NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) NEMA 12/3Ra Dusttight and Driptight Industrial Use Enclosure With External Reset Without External Reset $ Price Type $ Price Type $ Price Type Type GJL36003M01 GJL36007M02 GJL36015M03 SBG41S8c SBG42S8c SBG43S8c 2169.00 SBW41S8c SBW42S8c SBW43S8c 4248.00 SBA51S8c SBA52S8c SBA53S8c SBA41S8c SBA42S8c SBA43S8c 2798.00 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 GJL36050M05 SCG41S8c SCG42S8c SCG43S8c SCG44S8c SCG45S8c 2241.00 SCW41S8c SCW42S8c SCW43S8c SCW44S8c SCW45S8c 4320.00 SCA51S8c SCA52S8c SCA53S8c SCA54S8c SCA55S8c SCA41S8c SCA42S8c SCA43S8c SCA44S8c SCA45S8c 2867.00 1-1/2–3 5 71/2–10 2 GJL36015M03 GJL36030M04 GJL36050M05 SDG41S8c SDG42S8c SDG43S8c 3024.00 SDW41S8c SDW42S8c SDW43S8c 5844.00 SDA51S8c SDA52S8c SDA53S8c SDA41S8c SDA42S8c SDA43S8c 3794.00 1/4–1/3 1/2–1 1-1/2–3 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41S8c SBG42S8c SBG43S8c 2169.00 SBW41S8c SBW42S8c SBW43S8c 4248.00 SBA51S8c SBA52S8c SBA53S8c SBA41S8c SBA42S8c SBA43S8c 2798.00 1/4–1/3 1/2–1 1-1/2–3 5–7-1/2 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 SCG41S8c SCG42S8c SCG43S8c SCG44S8c 2241.00 SCW41S8c SCW42S8c SCW43S8c SCW44S8c 4320.00 SCA51S8c SCA52S8c SCA53S8c SCA54S8c SCA41S8c SCA42S8c SCA43S8c SCA44S8c 3867.00 1-1/2–3 5–7-1/2 10 15 2 GJL36015M03 GJL36030M04 GJL36050M05 GJL36075M06 SDG41S8c SDG42S8c SDG43S8c SDG44S8c 3024.00 SDW41S8c SDW42S8c SDW43S8c SDW44S8c 5844.00 SDA51S8c SDA52S8c SDA53S8c SDA54S8c SDA41S8c SDA42S8c SDA43S8c SDA44S8c 3794.00 1/4–1 1-1/2–3 5 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41S8c SBG42S8c SBG43S8c 2169.00 SBW41S8c SBW42S8c SBW43S8c 4248.00 SBA51S8c SBA52S8c SBA53S8c SBA41S8c SBA42S8c SBA43S8c 2798.00 1/4–1 1-1/2–3 5–7-1/2 10 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 SCG41S8c SCG42S8c SCG43S8c SCG44S8c 2241.00 SCW41S8c SCW42S8c SCW43S8c SCW44S8c 4320.00 SCA51S8c SCA52S8c SCA53S8c SCA54S8c SCA41S8c SCA42S8c SCA43S8c SCA44S8c 2867.00 5–7-1/2 10–15 20–25 2 GJL36015M03 GJL36030M04 GJL36050M05 SDG41S8c SDG42S8c SDG43S8c 3024.00 SDW41S8c SDW42S8c SDW43S8c 5855.00 SDA51S8c SDA52S8c SDA53S8c SDA41S8c SDA42S8c SDA43S8c 3794.00 1/4–1 1-1/2–3 5 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41S8c SBG42S8c SBG43S8c 2169.00 SBW41S8c SBW42S8c SBW43S8c 4248.00 SBA51S8c SBA52S8c SBA53S8c SBA41S8c SBA42S8c SBA43S8c 2798.00 1/4–1 1-1/2–3 5–10 1 GJL36003M01 GJL36007M02 GJL36015M03 SCG41S8c SCG42S8c SCG43S8c 2241.00 SCW41S8c SCW42S8c SCW43S8c 4320.00 SCA51S8c SCA52S8c SCA53S8c SCA41S8c SCA42S8c SCA43S8c 3867.00 5–10 GJL36015M03 SDG41S8c SDW41S8c SDA51S8c SDA41S8c 15–20 2 GJL36030M04 SDG42S8c 3024.00 SDW42S8c 5844.00 SDA52S8c SDA42S8c 3794.00 25 GJL36050M05 SDG43S8c SDW43S8c SDA53S8c SDA43S8c a NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. b For NEMA Size 3–5 starters in oversized NEMA 1, 4 or 12 enclosures, contact factory for pricing and TAG number. c Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Note: Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. Table 16.95: Coil Voltage Codes Voltage 16 60 Hz 24ed 120e 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 d NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8539SBG41S8V01S). These voltage codes must include Form S (supplied at no charge). When specifying Form S, please supply motor voltage when ordering (i.e., order as 8539SCG41S8V02S). f Not included in Laser™ Delivery program. Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. e Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-41 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-36 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters— NEMA Rated Thermal Magnetic Circuit Breaker Class 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units (Sizes 0-6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.96: Full Voltage Type, Non-Reversing, with Melting Alloy Overload Relays NEMA Type 1 General Purpose Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase 2 3 5 7-1/2 200 (208) 10 15 20 25 30 40 50 60 75 100 125 150 2 3 5 7-1/2 230 (240) 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 NEMA Size Circuit Breaker Type Type 0 FALe Ampere Rating 15 20 SBG1d SBG3d MAL 0 FALe FALe 30 45 1 2 FALe 3 FAL FAL KAL 4 KAL 5 LAL 6 MAL 7 MAL a b c d e Note: $ Price With External Reset Without External Reset $ Price Type Type SBA1d SBA3d 1742. 1814. 1400. 2768. 3182. 3843. 3843. 1472. SCW5d SCW2d 2840. SCW15d SCW12d 3267. SCR5d SCR2d 3936. SCT5d SCT2d 3936. SCA15d SCA12d SCA5d SCA2d 2255. 4364. 3843. SDT1d SET3d SET1d SET5d SFT3d SFT4d SGT6d SGT1d SGT4d — — — SBT1d SBT3d 5255. 3182. SDR1d SER3d SER1d SER5d SFR3d SFR4d SGR6d SGR1d SGR4d — — — SBR1d SBR3d 5255. 2768. SDW11d SEW13d SEW11d SEW15d SFW13d SFW14d — — — — — — SBW11d SBW13d 4805. 1400. SDW1d SEW3d SEW1d SEW5d SFW3d SFW4d SGW6d SGW1d SGW4d SHW4d SHW3d SHW5d SBW1d SBW3d 3843. SDA11d SEA13d SEA11d SEA15d SFA13d SFA14d SGA16d SGA11d SGA14d SHA14d SHA13d SHA15d SBA11d SBA13d SDA1d SEA3d SEA1d SEA5d SFA3d SFA4d SGA6d SGA1d SGA4d SHA4d SHA3d SHA5d SBA1d SBA3d 1472. SCW1d SCW6d 2840. SCW11d SCW16d 3267. SCR1d SCR6d 3936. SCT1d SCT6d 3936. SCA11d SCA16d SCA1d SCA6d SCG1d SCG6d 6 Bolted Type b SCG5d SCG2d SDG1d SEG3d SEG1d SEG5d SFG3d SFG4d SGG6d SGG1d SGG4d SHG4d SHG3d SHG5d SBG1d SBG3d LAL ® $ Price SPIN TOP $ Price Type SBA11d SBA13d FALe FAL FAL KAL 5 Type SBT1d SBT3d FALe KAL $ Price SBR1d SBR3d 2 4 Type NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure SBW11d SBW13d 1 60 90 100 110 125 200 200 250 300 450 600 600 15 20 $ Price NEMAs 7 & 9 For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G (Cast Aluminum) Division 1 & 2 SBW1d SBW3d 35 50 3 NEMA NEMA 4 & 4X 4 & 4X Watertight Watertight Dusttight and Dusttight and Corrosion Enclosure Resistant Stainless Steel (304) Polyester Enclosure (Sizes 0–5)a 3879. 8508. 19724. 42825. 7554. 13208. 31716. 49946. 8310. 14534. — — 8679. 13521. 29381. — 8679. 13521. 29381. — 60 SDG1d SDA1d 2255. SDW1d 4364. SDW11d 4805. SDR1d 5255. SDT1d 5355. SDA11d 80 SDG7d SDW7d SDW17d SDR7d SDT7d SDA17d SDA7d 90 SEG3d SEW3d SEW13d SER3d SET3d SEA13d SEA3d 100 SEG1d 3879. SEW1d 7554. SEW11d 8310. SER1d 8679. SET1d 8679. SEA11d SEA1d 110 SEG5d SEW5d SEW15d SER5d SET5d SEA15d SEA5d 150 SFG1d SFA1d 8508. SFW1d 13208. SFW11d 14534. SFR1d 13521. SFT1d 13521. SFA11d 200 SFG4d SFW4d SFW14d SFR4d SFT4d SFA14d SFA4d 225 SGG3d SGW3d — SGR3d SGT3d SGA13d SGA3d 250 SGG1d 19724. SGW1d 31716. — — SGR1d 29381. SGT1d 29381. SGA11d SGA1d 350 SGG2d SGW2d — SGR2d SGT2d SGA12d SGA2d 450 SHG4d SHW4d — — — SHA14d SHA4d 600 SHG3d 42825. SHW3d 49946. — — — — — — SHA13d SHA3d 800 SHG7d SHW7d — — — SHA17d SHA7d 900 SJG2d SJW2d — — — SJA12d — 57837. 64958. — — — 1000 SJG3d SJW3d — — — SJA13d — NEMA Size 6 & 7 starters are NEMA 4 painted sheet steel enclosures. NEMA 7 & 9 bolted are not UL Listed. NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed below. Rated 250 Volts Max. Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. Table 16.97: 10245. 22859. 46670. 1742. 1814. 2739. 4505. 10245. 22859. 46670. 61682. Coil Voltage Codes Voltage 60 Hz 24gf 120g 208 240 277 480 600 Specify 2739. 4505. 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 Refer to page 16-30 for details. f NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8539SBG1V01S). g These voltage codes must include Form S (supplied at no charge). When specifying Form S, please supply motor voltage when ordering (i.e., order as 8539SCG5V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-41 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-37 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters— NEMA Rated Thermal Magnetic Circuit Breaker Class 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Devices require 3 thermal units (Sizes 00-6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.98: Line Voltage Type, Non-Reversing, with Melting Alloy Overload Relays Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase 5 7-1/2 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 500 600 5 7-1/2 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 500 600 460 (480) 575 (600) Table 16.99: NEMA Size 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 NEMA Size 1 2 3 1 2 3 2 3 7.5 0 1 2 0 1 2 0 1 2 16 240 Circuit Breaker Type Type Ampere Rating FAL 15 20 FAL 25 40 FAL 60 70 80 FAL 90 100 110 KAL 125 200 225 LAL 250 350 450 600 MAL 600 800 900 MAL 1000 FAL 15 15 FAL 20 35 FAL 45 60 60 FAL 80 90 FAL 100 KAL 110 KAL 150 KAL 200 LAL 200 LAL 250 350 450 MAL 500 600 800 MAL 900 SBG2d SCG3d SCG7d SDG3d SDG4d SDG5d SEG6d SEG3d SEG1d SFG5d SFG3d SFG4d SGG3d SGG1d SGG2d SHG4d SHG3d SHG5d SHG7d SJG2d SJG3d SBG2d SCG8d SCG3d SDG8d SDG9d SDG4d SEG4d SEG6d SEG3d SFG6d SFG5d SFG1d SGG7d SGG6d SGG1d SHG6d SHG4d SHG2d SHG3d SJG1d SJG2d $ Price 1814. 1886. 2669. 3879. 8508. 19724. 42825. 57837. 1814. 1886. 2669. 3879. 8508. 19724. 42825. 57837. Type SBW2d SCW3d SCW7d SDW3d SDW4d SDW5d SEW6d SEW3d SEW1d SFW5d SFW3d SFW4d SGW3d SGW1d SGW2d SHW4d SHW3d SHW5d SHW7d SJW2d SJW3d SBW2d SCW8d SCW3d SDW8d SDW9d SDW4d SEW4d SEW6d SEW3d SFW6d SFW5d SFW1d SGW7d SGW6d SGW1d SHW6d SHW4d SHW2d SHW3d SJW1d SJW2d $ Price 3182. 3252. 4778. 7554. 13208. 31716. 49946. 64958. 3182. 3252. 4778. 7554. 13208. 31716. 49946. 64958. Type SBW12d SCW13d SCW17d SDW13d SDW14d SDW15d SEW16d SEW13d SEW11d SFW15d SFW13d SFW14d — — — — — — — — — SBW12d SCW18d SCW13d SDW18d SDW19d SDW14d SEW14d SEW16d SEW13d SFW16d SFW15d SFW11d — — — — — — — — — NEMAs 7 & 9 For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G (Cast Aluminum) Division 1 & 2 ® $ Price SPIN TOP $ Price Type 3653. 3738. 5255. 8310. 14534. — — — 3653. 3738. 5255. 8310. 14534. — — — SBR2d SCR3d SCR7d SDR3d SDR4d SDR5d SER6d SER3d SER1d SFR5d SFR3d SFR4d SGR3d SGR1d SGR2d — — — — — — SBR2d SCR8d SCR3d SDR8d SDR9d SDR4d SER4d SER6d SER3d SFR6d SFR5d SFR1d SGR7d SGR6d SGR1d — — — — — — 3843. 3936. 5255. 8679. 13521. 29381. — — 3843. 3936. 5255. 8679. 13521. 29381. — — Bolted Type b SBT2d SCT3d SCT7d SDT3d SDT4d SDT5d SET6d SET3d SET1d SFT5d SFT3d SFT4d SGT3d SGT1d SGT2d — — — — — — SBT2d SCT8d SCT3d SDT8d SDT9d SDT4d SET4d SET6d SET3d SFT6d SFT5d SFT1d SGT7d SGT6d SGT1d — — — — — — NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure $ Price 3843. 3936. 5255. 8679. 13521. 29381. — — 3843. 3936. 5255. 8679. 13521. 29381. — — With External Reset Without External Reset Type Type SBA12d SCA13d SCA17d SDA13d SDA14d SDA15d SEA16d SEA13d SEA11d SFA15d SFA13d SFA14d SGA13d SGA11d SGA12d SHA14d SHA13d SHA15d SHA17d SJA12d SJA13d SBA12d SCA18d SCA13d SDA18d SDA19d SDA14d SEA14d SEA16d SEA13d SFA16d SFA15d SFA11d SGA17d SGA16d SGA11d SHA16d SHA14d SHA12d SHA13d SJA11d SJA12d SBA2d SCA3d SCA7d SDA3d SDA4d SDA5d SEA6d SEA3d SEA1d SFA5d SFA3d SFA4d SGA3d SGA1d SGA2d SHA4d SHA3d SHA5d SHA7d — — SBA2d SCA8d SCA3d SDA8d SDA9d SDA4d SEA4d SEA6d SEA3d SFA6d SFA5d SFA1d SGA7d SGA6d SGA1d SHA6d SHA4d SHA2d SHA3d — — $ Price 2156. 2228. 3153. 4505. 10245. 22859. 46670. 61682. 2156. 2228. 3153. 4505. 10245. 22859. 46670. 61682. Thermal Magnetic Circuit Breaker Type, Single Phaseef Motor Max. Coil Voltage Hp Voltage 120 NEMA NEMA 4 & 4X 4 & 4X Watertight Watertight Dusttight and Dusttight and Corrosion Enclosure Resistant Stainless Steel (304) Polyester Enclosure (Sizes 0–5)a NEMA Type 1 General Purpose Enclosure 120 240 Poles Circuit Breaker (Type) Ampere Rating NEMA 1 General Purpose Enclosure NEMA 12/3Rc NEMA 4 & 4X NEMA 4 & 4X Dusttight and Driptight Industrial Use Watertight and Dusttight Watertight, Dusttight and Enclosure Enclosure Corrosion Resistant Stainless Steel (304) With Without Polyester Enclosure (Sizes 0–2) External Reset External Reset $ Price NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Type $ Price Type $ Price Type $ Price Type Type FAL12030 30 SBG61V02 1400.00 SBW61V02 2768.00 SBW64V02 3182.00 SBA64V02 SBA61V02 1742.00 FAL12050 50 SCG61V02 1472.00 SCW61V02 2840.00 SCW64V02 3267.00 SCA64V02 SCA61V02 1814.00 FAL12070 70 SDG61V02 2255.00 SDW61V02 4364.00 SDW64V02 4805.00 SDA64V02 SDA61V02 2739.00 FAL22025 25 SBG71V02 1400.00 SBW71V02 2768.00 SBW74V02 3182.00 SBA74V02 SBA71V02 1742.00 2 FAL22035 35 SCG71V02 1472.00 SCW71V02 2840.00 SCW74V02 3267.00 SCA74V02 SCA71V02 1814.00 FAL22080 80 SDG71V02 2255.00 SDW71V02 4364.00 SDW74V02 4805.00 SDA74V02 SDA71V02 2739.00 FAL22025 25 SBG71V03 1400.00 SBW71V03 2768.00 SBW74V03 3182.00 SBA74V03 SBA71V03 1742.00 2 FAL22035 35 SCG71V03 1472.00 SCW71V03 2840.00 SCW74V03 3267.00 SCA74V03 SCA71V03 1814.00 FAL22080 80 SDG71V03 2255.00 SDW71V03 4364.00 SDW74V03 4805.00 SDA74V03 SDA71V03 2739.00 a NEMA Size 6 and 7 starters are NEMA 4 painted sheet steel enclosures. b NEMA 7 and 9 bolted are not UL Listed. c NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed on page 16-37. e Single phase units require one thermal unit and are not available with Form Hxx—Solid State Overload Relays. f Not included in Laser™ Delivery program. Note: Some control transformers may require the use of oversized enclosures. Refer to control transformer selection table on page 16-40. 1 For How to Order Information, see page 16-12. Refer to page 16-30 for details. 16-38 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters—NEMA Rated Class 8538, 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us Application Data Table 16.102: Class 8539—UL Listed Short Circuit Ratings Table 16.100: Class 8539—UL Listed Short Circuit Ratings Thermal Magnetic Circuit Breaker Type NEMA Available Amperes Voltage Enclosure Size RMS Symmetrical 0-3 600 Standardb 5,000 4&5 600 Standardb 10,000 6 600 Standardb 18,000 7 0-480 Standardb 30,000 7 481-600 Standardb 22,000 Standard enclosure includes non-oversize NEMAs 1, 4 & 4X Stainless, and 12. Mag-Gard® Motor Circuit Protector Type NEMA Size Voltage Enclosure Available Amperes RMS Symmetrical 0 & 1, 2 Size 3 Type SE●41 & SE●51 Only (GJL) 0–480 Standarda and Oversize 100,000 0 & 1 (FAL) 0–480 22,000 0 & 1 (FAL) 481–600 3 (FAL) 0–480 4 (KAL) 0–480 Standarda and Oversize Standarda and Oversize Standarda and Oversize Standarda and Oversize b 10,000 Table 16.103: Class 8538—UL Listed Short Circuit Ratings 5,000 Available Amperes RMS Symmetrical 0–3 Class H or K Standardc 5,000 0–3 Class R/J Standardc 100,000 0–2 Class H or K Oversize 5,000 0–2 Class R/J Standard 100,000 4–5 Class H or K Standardc 10,000 4–5 Class R/J Standardc 100,000 6 Class H or K Standardc 18,000 6 Class R/J Standardc 100,000 Standard enclosure includes non-oversize NEMAs 1, 4 & 4X Stainless, and 12. NEMA Fuse Class NEMA Size 10,000 0 & 1, 2 Standarda and Size 3 Type SE●41 & 481–600 10,000 Oversize SE●51 Only (GJL) 0–3 600 NEMA 7 & 9 5,000 2 600 Oversize 22,000 2–6 600 Standarda 22,000 4&5 600 NEMA 7 & 9 10,000 7 0–480 Standarda 30,000 7 481–600 Standarda 22,000 a Standard enclosure includes non-oversize NEMAs 1, 4 & 4X Stainless, and 12. Table 16.101: Table 1: Mag-Gard Trip Range Suffix Range Suffix Range Suffix Range Suffix Range Number (A) Number (A) Number (A) Number (A) M01 9–33 11M 8–28 25M 625–1250 33M 1500–3000 M02 21–77 12M 18–70 26M 750–1500 35M 1750–3500 M03 45–165 13M 50–180 29M 875–1750 36M 2000–4000 M04 90–330 15M 100–350 30M 1000–2000 40M 2500–5000 M05 150–550 16M 150–580 31M 1125–2250 42M 3000–6000 M06 225–825 18M 300–1100 32M 1250–2500 44M 3500–7000 Note: The Mag-Gard adjustable trip range is determined by the suffix of the circuit breaker catalog number. Table 16.101 indicates the trip range which corresponds to a given suffix number. The Mag-Gard Motor Circuit Protector should be adjusted to a level just above Locked-Rotor Current of the motor. This setting will provide optimum overcurrent protection for the motor. For more information on Mag-Gard instantaneous trip circuit breakers, refer to the Mag-Gard circuit breaker section of this Catalog. c Enclosure Table 16.104: Table 2: Motor Code Letter Table Horsepower Motor Code Letters 1/2 or less A-L 3/4–1-1/2 A-K 2–3 A-J 5–25 A-H 30–125 A-G 150 or more A-F Note: The combination starter selection tables on pages 16-35–16-36 are suitable for motors with Locked-Rotor Current letters per NEC Table 430-7(b) as listed in Table 16.104. For other motors a special thermal magnetic circuit breaker with adjustable magnetic trip settings for the specific motor is required. When ordering for these special applications, specify the motor horsepower, voltage, frequency, full load current and code letter (or locked rotor current) to assure proper protection. Table 16.105: Terminals Line Terminals on Disconnect NEMA Size Type Wire Range Power Terminals On Magnetic Starter Wires Per Terminal Control Terminals On Magnetic Starter Type of Wire Range Lug Circuit Breaker #14–#4 Cuf SB & Box #12–#4 Al or #14–#1/0 Cu 0&1 #14–1/0 Cu/Al Pressure Wire #14–#8 Cu 1 or 2 Pressure Wire SC Lug #12–#1/0 Al #14–#1 Cu/#8–#1/0 Al (GJL Breaker) Box #14–#1/0 Cu or #12–#1/0 Al 2 SD #14–1/0 Cu/Al Box Lug #14–#4 Cu 1 Pressure Wire Lug #14–#1 Cu/#8–#1/0 Al (GJL Breaker) #14–#2 Cu Box #10–#2 Al (FA Breaker) 3 SE #14–1/0 Cu/Al Box Lug #14–#0 Cu 1 Pressure Wire Lug #4–300 MCM Cu/Al (KA Brkr) #14–#1 Cu/#8–#1/0 Al (GJL Breaker) #14–#1/0 Cu Box 4 SF #6–300 MCM Cu/Al #12–#1/0 Al (FA Breaker) Box Lug #8–250 MCM Cu 1 Pressure Wire Lug #4–300 MCM Cu/Al (KA Brkr) #4–300 MCM Cu/AL (KA Breaker) Box 5 SG One #4–500 MCM Cu (1)#1–600 MCM or Box Lug #4–500 MCM Cu 1 Pressure Wire Lug (2)#1–250 MCM Cu/Al (LA Brkr) (1)#1–600 MCM or Box 6 SH — (2)#1–250 MCM Cu/Al (LA Breaker) Parallel Groove 250–500 MCM Cud 1 or 2 Pressure Wire Lug (3)#3/0–500 MCM Cu/Al (MA Brkr) 7 SJ Box Lug — (3)#3/0–500 MCM Cu/Al Parallel Groove 250–500 MCM Cu 1–4 Pressure Wire d Order Class 9999 Type SCU6 parts kit to convert power terminals to accept sizes 2/0–300 e Terminal block range limited to #16–#14. MCM wire. f Use on FAL circuit breakers rated 25 A or less. Switch Type of Lug Wire Range Wires Per Terminal #16–#12 Cu 2 #16–#12 Cu 2 #16–#12 Cu 2 #16–#12 Cu 2 #16–#12 Cu 2 #16–#12 Cue 2 #16–#12 Cu 2 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Type of Lug © 2009 Schneider Electric All Rights Reserved 16-39 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters—NEMA Rated Class 8538, 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us selection. For electrical ratings of disconnect and circuit breaker interlocks, see Table 16.107 below. Accessories Interlocks and Control Transformers An electrical interlock may also be factory installed in either a disconnect switch or circuit breaker combination starter. Specify Form Y74 for single pole, or Form Y75 for two pole interlocks. For pricing see factory modifications (Forms). A one or two pole electrical interlock can be added to the disconnect switch or circuit breaker. Thus, if a separate control circuit is used, the magnetic starter can be de-energized when the disconnect is switched to the OFF position. See Table 16.106 for proper interlock Table 16.106: Disconnect Switch and Breaker Interlocks Class SPDT (Y74) Type 8538 a b SBb, SCb, SDb (Series B) SD (Series C) SB, SC (Series C) 8538 SE, SF (Series A) & SE (Series B & C) 8738 SF (Series B & C) SG 8539, 8739 SB, SC, SD, SE, SF, SGa 8538 SBA, SCA, SBG, SCG (Series D) 8538 SBAS8, SCAS8, SBGS8, SCGS8 (Series D) 8738 SBAS8, SCAS8, SBGS8, SCGS8 (Series E) 8738 SBA, SCA, SBG, SCG (Series E) 8538 SDA, SDAb, SDG, SDGb (Series D) 8738 SDA, SDG (Series E) 8538, 8738 SEA, SEG (Series D) No interlocks available for the GJL circuit breaker. The internally mounted auxiliary switch (catalog number AAC) must be used. Class 8538 type numbers ending in suffix “S8”. DPDT (Y75) Class 9999 Type R6 R43 R45 R8 R41 R39 R35 R26 TC11 TC10 TC10 TC11 TC10 TC10 TC10 $ Price 116.00 116.00 107.00 131.00 131.00 135.00 435.00 131.00 120.00 120.00 120.00 120.00 120.00 120.00 120.00 Class 9999 Type R7 R44 R46 R9 R42 R40 R36 R27 TC21 TC20 TC20 TC21 TC20 TC20 TC20 $ Price 221.00 221.00 207.00 243.00 243.00 243.00 521.00 243.00 239.00 239.00 239.00 239.00 239.00 239.00 239.00 Table 16.107: Disconnect Switch and Breaker Interlock Electrical Ratings Class 9999 Type R6, 8, 26, 35, 39, 41, 43, 45, TC10, & TC11 Class 9999 Type R7, 9, 27, 36, 40, 42, 44, 46 & TC 20, 21 AC—50 or 60 Hz AC—50 or 60 Hz Maximum Current Volts 120 240 480 600 Make Break Amps Amps 40 20 10 8 15 10 8 6 Maximum Current Continuous Carrying Current Amps 15 15 15 15 Amps 120 240 480 600 These 100 VA kits are designed specifically to allow for field modification of NEMA Size 0, 1 and 2 combination starters that require a control power transformer. The kit includes a 9070TF100 fused transformer on a special mounting plate for ease of placement and installation on the combo starter back pan. A wire harness (with wiring diagrams) is included to complete the kit. Table 16.108: Control Transformer Field Modification Kits Catalog Number 9999CPT1D1 9999CPT1D3 Primary Voltage 240 x 480 208 Secondary Voltage 120 120 $ Price 447.00 447.00 Table 16.109: Control Transformer Selection NEMA Size Starter Type Standarde Capacity (Form F4T) 50 VAe Additional Capacity (Form F4T10) 100 VAe Additional Capacity (Form F4T11) 200 VAe Additional Capacity (Form F4T12) 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Class 9070 Class 9070 Class 9070 Class 9070 Type Type Type Type 0&1 SB & SC T100 T150 T200 T300c 2 SD T100 T150 T300d T300d 3 SE T150 T150 T300 T500 4 SF T300 T300 T500 T500 T50 and T100 and T150 and T300 and 5 SG 8501XO20 8501XO20 8501XO20 8501XO20 EO3S2 is EO3S2 and EO3S2 and EO3S2 and 6 SH standard T50 T100 T200 EO19S2 is EO19S2 and EO19S2 and EO3S2 and 7 SJ standard T50 T100 T200 c Requires oversized enclosure. (Size 2 reversing enclosure.) ® d Available in standard enclosure with Mag-Gard circuit breaker and non-fusible disconnect switch. Requires oversized enclosure with thermal-magnetic circuit breakers and fusible disconnect switches. (Size 2 reversing enclosure.) e Complete the contactor or starter Class and Type with Voltage Code, see page 16-110. 16-40 Make Volts CP1 30 15 7.5 6 Break VA 3450 3450 3450 3450 Amps VA 3 1.5 .75 .6 345 345 345 345 Continuous Carrying Current Amps 10 10 10 10 Internal Auxiliary Switch—Circuit breakers can be supplied with a factory installed auxiliary switch for remote indication of an open and/or tripped or a closed breaker. One (specify Form Y741) or two (specify Form Y751) auxiliary switches can be supplied. The switches are supplied with normally open and normally closed circuits with a common connection. Contacts must be used on the same polarity and are rated 15 Amps at 240 Vac. The auxiliary switches are located internally and are furnished with 19-20 inch long leads. Alarm Switch—The alarm switch only operates when the breaker is tripped. It is used to actuate bell alarms and warning lights. The alarm switch is factory installed only (specify Form Y742) and consists of a single pole single throw switch which is normally open except when the breaker is tripped. The contacts are rated 4 Amps at 240 Vac. This switch is located in the breaker and is supplied with 19-20 inch long leads. Transformer Selection—Space and drilling are provided in all disconnect switch and circuit breaker combination starters in NEMA 1, 4 & 4X stainless and polyester, 12 and 7 & 9 bolted enclosures for the field addition (or factory installation) of a Class 9070 control circuit transformer and Class 9999 Type SFR4 fuse holder. This kit can be either panel mounted or side mounted on the Type S starter. For standard control transformer selection in combination starters, see Table 16.109. Consult field office for transformer additions to NEMA 7 & 9 SPIN TOP® enclosures. For secondary fuse holder order 9080PF1. Fuse Block Mounting Brackets—The standard capacity transformer, Class 9070 Type T100, for the Size 0 and 1 starters mounts to the right of the magnetic starter. Standards—Most combination starters and forms are UL Listed in file E152395, Category NKJH, and CSA File CR 584. Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters—NEMA Rated Class 8538, 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us Approximate Dimensions Table 16.110: NEMA 1 Enclosure—Figure 1 NEMA Size Class Type 0–1 8538 & 8539 SBG SCG 2 8538 & 8539 SDG Dimensions in Inchesa A B C D 9-1/2 22-1/2 8-11/32 10-1/2 26 9-19/32 E F G H Top & Bottom I J K L M N Sides O P W X Y Wt. (lbs.) 6-3/8 20-1/2 14-21/32 1-13/16 1-11/16 3 2-5/16 1-1/16 3-1/4 2-3/16 1-1/4 7/8 — 1/2–3/4 1/2–3/4 1/2 38 7-3/8 3-1/4 2-3/16 1-1/4 7/8 — 1–1-1/4 1/2–3/4 1/2 54 Sides 24 16-29/32 2-1/8 2 4 2-5/16 1-1/16 Table 16.111: NEMA 1 Enclosure—Figure 2 NEMA Size Class Type 3b 8538 & 8539 Dimensions in Inchesa A B C D E F G H I SEG 15-1/4 42 10-19/32 9-1/4 3 22-23/32 41 1/2 — 8538 SFG 16 52-1/2 10-17/32 10 3 23-21/32 51-1/2 1/2 8539 SFG 16 52-1/2 10-17/32 10 3 23-21/32 51-1/2 1/2 8538 SGG 20 78 15-1/2 12 4 29-13/32 77 8539 SGG 20 66 13-23⁄ 32 12 4 29-13/32 8538 & 8539 SHG 36 90 21-1/32 — — 41-3/8 Top & Bottom J K W X Y Wt. (lbs.) 5-3/8 1-9/32 29/32 1–1-1/4 2–2-1/2 1/2–3/4 1/2 102 2-11/16 5-3/8 1-9/32 29/32 2-1/2 1/2–3/4 1/2 163 2-11/16 5-3/8 1-9/32 29/32 2-1/2 1/2–3/4 1/2 163 — 1/2–3/4c 3 — 450 — — 1/2–3/4 3 — 420 — — — — — — L M N O 2-53/64 3-17/32 5 2-11/16 — 2-53/64 3-17/32 5 — 2-53/64 3-17/32 5 1/2 — 3-33/64 4-39/64 9-1/4 3-3/16 — — 65 1/2 — 3-33/64 4-39/64 5 3-3/16 — — — — — — 5 — — P 4 5 6e Table 16.112: NEMA 12/3R Enclosure—Figure 3 Dimensions in Inchesd NEMA Size Class Type C D E F G H I J Wt. (lbs.) 0–1 8538 & 8539 SBA SCA 9-1/2 2 8538 & 8539 SDA 10-1/2 8-11/32 24 3-1/4 2-1/2 4-1/2 23-1/2 19/32 4-7/16 14-5/16 40 9-19/32 27-3/4 3-1/4 2-1/2 5-1/2 27 3/8 4-1/8 16-9/16 3b 8538 & 8539 SEA 15-1/4 55 10-19/32 42 5 3 9-1/4 41 1/2 5-1/16 22-5/16 111 8538 SFA 8539 SFA 16 10-17/32 52-1/2 5 3 10 51-1/2 1/2 4-3/16 22-31/32 170 16 10-17/32 52-1/2 5 3 10 51-1/2 1/2 5-3/16 22-31/32 8538 170 SGA 20 13-23/32 78 9-1/4 4 12 77 1/2 7-25/32 29-13/32 — 8539 SGA 20 13-23/32 66 5 4 12 65 1/2 7-25/32 27-13/32 440 8538 & 8539 SHA 36 17 90 5 — — — — — 47-3/8 — A B 4 5 6e Table 16.113: NEMA 4 and 4X Stainless Steel Enclosures—Figure 4 NEMA Size Class Type 0–1 8538 & 8539 2 3b Dimensions in Inches a D E Bottom Top & Bot. F G H I J K 2-1/2 4-1/2 23-1/2 19/32 3-1/32 1-5/16 2-1/2 5-1/2 27 19/32 3 2 10-1/4 40-1/2 19/32 3 2-9/16 X Wt. (lbs.) 3/4 Hub 1 Hub 40 3/4 Hub 1-1/2 Hub 55 3/4 Hub 2-1/2 Hub 111 A B C L W SBW SCW 9-1/2 8-11/32 24-1/16 3-1/4 8538 & 8539 SDW 10-1/2 9-19/32 27-3/4 3-1/4 2-5/16 14-9/32 2-5/8 16-17/32 8538 & 8539 SEW 15-1/4 10-19/32 42 5 3-3/16 3-3/16 223/16 8538 SFW 16 10-17/32 52-1/2 5 3-9/16 11 51 19/32 3 2-9/16 3-3/16 22-15/32 3/4 Hub 2-1/2 Hub 158 8539 SFW 16 10-17/32 52-1/2 3-1/4 2-1/2 11 51 19/32 3 2-9/16 3-3/16 22-15/32 3/4 Hub 2-1/2 Hub 120 8538 SGW 20 13-23/32 78 9-1/4 4 12 77 9/16 4-1/2 3 3-1/2 29-13/32 3/4 Hub 3-1/2 Hub — 8539 SGW 20 13-23/32 66 5 4 12 65 9/16 4-1/2 3 3-1/2 29-13/32 3/4 Hub 3-1/2 Hub 440 8538 & 8539 SHW 36 17 90 — — — — — — — — 47-7/8 — — — 4 5 6e a Dimensions also for Form F4T (standard control transformer). Form F4T11 (100 VA extra capacity) and Form F4T12 (200 VA extra capacity) could require the use of an oversized enclosure. Refer to control transformer selection table on page 16-40. b Class 8538 Size 3 devices with 200 A fuse clips use dimensions for Class 8538 Size 4. c Left side only. d Dimensions include space for control circuit transformers. e Size 6 enclosures are floor mounting. Note: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. f (4) .31 in (8 mm) dia. mtg. holes for sizes 0, 1, and 2, (4) .44 in (11 mm) dia. mtg. holes for sizes 3 and 4, (4) .56 in (14 mm) dia. mtg. holes located on external flanges for size 5. Handle Swing L C M K A D N Y E Handle Swing L H O A F C O Handle Swing B D H E Handle Swing D B A F E H Y G C G C G B NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS P E B Y f Y Cover Open 90° f F Cover Open 90° W X W G J f f Cover Open 90° J Cover Open 90° L W F J W X W H J I K Figure 1 NEMA 1 Enclosure © 2009 Schneider Electric All Rights Reserved X I I K M N Figure 2 NEMA 1 Enclosure Figure 3 NEMA 12 Enclosure Figure 4 NEMAs 4 and 4X Stainless Steel Enclosure 16 A D 16-41 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Combination Starters— NEMA Rated Approximate Dimensions Class 8538, 8539 / Refer to Catalog 8538CT9701 www.schneider-electric.us Table 16.114: NEMA 4X Polyester Enclosure—Figure 1 NEMA Size A E Dimensions in Inches a Class Type A B C E 0, 1 8538 SBW SCW 13.72 11.4 26.94 6.25 0, 1 8539 SDW 0, 1, & 2 8738, 8739 SBW SCW 25.25 11.4 27.00 17.88 2 8538, 8539 SDW 8538, 8738 SEW 3–4 26.31 11.4 33.50 18.50 8539, 8739 SFW b a Dimensions also for Form F4T (standard control transformer) and Form F4T10 (50 VA additional capacity). Other control transformers may require the use of oversized enclosures. refer to the control transformer selection table on page 16-40. b 8539 Size 4 only. F 25.75 C F 25.75 32.25 B Figure 1 NEMA 4X Polyester Enclosure Table 16.115: NEMA 1, 4, 4X Stainless, 12/3R Oversize Enclosure—Figure 2 NEMA Size C D Dimensions in Inches NEMA Type Encl. Wide A High B Deep C Handle L D E 1 15 2-3/4 9-19/32 3-1/4 11-5/8 26-1/4 4 15 30-1/32 9-19/32 3-1/4 10 29-3/4 12 15 31 10-31/32 3-1/4 9 30-1/4 0–2 Handle Swing L A Mounting E B (4) .31 Dia. Mtg. Holes 8 Figure 2 Class 8538 and 8539 in Oversize Enclosures — NEMA 1, 4 & 4X Stainless and 12 Table 16.116: Class 8539—NEMA 7 & 9 Bolted Enclosure—Figure 3 NEMA Size Dimensions in Inches Type A B C D E F G H, J K, L, M, N P Z Wt. (lbs.) 14-1/4 27-5/8 9-1/2 1-1/4 19-1/4 9-5/8 11 2-3/8 3-1/8 1-1/2 1-1/2 115 3–4 SBT SCT SDT SET SFT 18-1/8 31-5/8 10 16-1/4 19-1/4 9-5/8 12-5/8 2-3/8 3-3/4 2-1/2 2-1/2 180 5 SGT 24-1/2 45-5/8 13-3/4 22-1/2 27-1/2 13-3/4 15-3/8 3-7/16 4 4 4 500 0–2 N M E B F Note: Bolted enclosure comes equipped with 3 closing plates in the door. Table 16.117: Class 8539—NEMA 7 & 9 SPIN TOP® Enclosure—Figure 4 NEMA Size Conduit Sizes Type LOC. A, B, C and D Dimensions in Inches E F G 26 H J K L M N P Q R S T Wt. (lbs.) SBR SCR 1-1/4 10-5/8 15-1/4 8 4-3/4 5-3/8 1-1/2 1-1/16 7-1/2 11 7-5/16 2-1/16 — — 70 2 SDR 1-1/2 13-7/8 30-1/2 19-1/4 8 4-3/4 5-1/4 1-1/2 1-1/16 7 18 9-3/8 — 115 3–4 SER SFR 2-1/2 5 SGR 4 13-3/8 39-1/2 20-1/4 8 19 53-1/2 27-3/4 — 4-3/4 7-1/2 2-1/2 — 10-1/2 — 11-1/4 4 1/8 16 23 8-5/8 3 — — — 20-5/8 11-3/8 4-5/16 12 6-1/2 C G L A Mtg. for 4 Bolts 0–1 2-3/4 K 140 J H .19 5 290 (2) "Z" Pipe Tap Top and Bottom 1/2" NPT for Breather and Drain D Figure 3 Class 8539 NEMA 7 and 9 Bolted Enclosure Information on Hubs 16 Hubs are supplied with each NEMA Type 4X combination starter as shown in the table below. Note that hubs are only installed in stainless steel enclosures; they are not installed in polyester enclosures. Table 16.118: Hub Sizes NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS NEMA Size Quantity 1 2 1 2 1 2 0&1 2 3&4 16-42 REAR VIEW Space Required To Remove Top Cover TOP VIEW Hub Size 0.75" 1.00" 0.75" 1.50" 0.75" 2.50" N R Note: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. Threaded Cover Enclosure Table 16.119: Conduit Sizes LOC A, B, C and D Overload Reset NEMA Size Std. 0—1 1-1/4 2 1-1/2 3—4 2-1/2 5 4 E Q A C B D G F K J H M (3) Mtg. Holes and/or Slots P Circuit Breaker Operating Handle – Space Required to Remove Combination Form Only (Add 1.00 In. to Overall Width) Bottom Cover Figure 4 Class 8539 NEMA 7 and 9 SPIN TOP Enclosure © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Contactors—NEMA Rated 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Class 8702 / Refer to Catalog 8502CT9701 www.schneider-electric.us NEMA Size NEMA 00, 0, 1 Reversing Contactor Continuous Current Ratings Class 8702 Type S reversing magnetic contactors are used for starting, stopping, and reversing AC motors where overload protection is separately provided. Class 8702 reversing contactors consist of two Class 8502 contactors mechanically and electrically interlocked. Open type devices, Sizes 0–5, are available in either horizontal or vertical arrangements. Sizes 00, 6, and 7 are available as horizontal only. Enclosed devices, Size 00–7, use horizontally arranged components. Type S reversing contactors are designed for operation at 600 Vac, 50–60 Hz. Table 16.120: NEMA Type 1 General Purpose Enclosure Open Type Motor Voltage Max. Hp Vertical Horizontal $ Price Type Type 00 9 200 230 460 575 1-1/2 1-1/2 2 2 0 18 200 230 460 575 3 3 5 5 1 27 200 230 460 575 — — — — SAO4b SBO12b SBO4b 7-1/2 7-1/2 SCO7b 10 10 SCO8b Type 855.00 SAG4b $ Price 917.00 NEMA Type 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure (Sizes 0–5)a Type $ Price Use Size 0 NEMA 7 & 9 c Hazardous Locations, Div. 1 & 2 Class I, Groups C & D Class II, Groups E, F & G Bolted Type $ Price Aluminum Use Size 0 SPIN TOP® Type $ Price Use Size 0 NEMA 12/3Rd Dusttight & Driptight Industrial Use Enclosure Type $ Price Use Size 0 1026.00 SBG4b 1088.00 SBW14b 1742.00 SBT49b 3716.00 SBR9b 4649.00 SBA4b 1344.00 1169.00 SCG8b 1259.00 SCW14b 2241.00 SCT49b 3900.00 SCR9b 4877.00 SCA4b 1515.00 200 10 230 15 SDO1b SDO2b 2222.00 SDG2b 2456.00 SDW11b 3936.00 SDT43b 6507.00 SDR3b 8139.00 SDA1b 2883.00 460 25 575 25 200 25 30 3 90 230 SEO1b SEO2b 3689.00 SEG2b 4094.00 SEW11b 6287.00 SET43b 10439.00 SER3b 13050.00 SEA1b 5034.00 460 50 575 50 200 40 — — 50 — — 4 135 230 SFO1b SFO3b 9201.00 SFG3b 9945.00 SFW11b 13820.00 — — SFA1b 11399.00 460 100 — — 575 100 — — 200 75 — — 100 — — 5 270 230 SGO1b SGO3b 16592.00 SGG3b 20885.00 SGW11b24017.00 — — SGA1b 24017.00 460 200 — — 575 200 — — 200 150 — — — 200 — — — 6 540 230 SHO1b 41489.00 SHG1b 48614.00 SHW1b 55736.00 — — SHA1b 52461.00 460 400 — — — 575 400 — — — 200 — — — — 300 — — — 7 810 230 SJO1b 59372.00 SJG1b 66816.00 SJW1b 73619.00 — — SJA1b 70343.00 460 600 — — — 575 600 — — — a NEMA 4 and 4X stainless steel enclosures (sizes 0–5) have a brushed finish. Sizes 6 and 7 are painted sheet steel and are rated NEMA 4 only. b Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection table below. c NEMA 7 and 9 bolted are not UL listed. d NEMA 12 enclosure may be field modified for outdoor non-corrosive and non-service-entrance-rated application; see page 16-104 for more information. 2 45 Table 16.121: Coil Voltage Codes Voltage 60 Hz 24ef 120f 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 e NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4-7. On Sizes 00-3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8702SAO4V01S). f These voltage codes must include Form S (supplied at no charge) (i.e., order as 8702SAO4V02S) Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-47 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Separate Enclosures (Class 9991). . . . . . . . . . . . . . . . . . . . . . . . page16-102 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-43 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Contactors—NEMA Rated Class 8702 / Refer to Catalog 8502CT9701 www.schneider-electric.us Table 16.122: 600 Vac Maximum—50–60 Hz NEMA Continuous Motor Current Size Voltage Ratings Max. Hp NEMA 1 General Purpose Enclosure Open Type Type of Motor Vertical Type Horizontal $ Price Type Type NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure $ Price Type $ Price NEMA 7 & 9 b Hazardous Locations, Div. 1 & 2 Class I, Groups C & D Class II, Groups E, F & G Bolted Type ® $ Price SPIN TOP $ Price Type NEMA 12/3Rc Dusttight & Driptight Industrial Use Enclosure Type $ Price 2-Pole Single Phase 00 9 0 18 1 27 115 230 115 230 115 230 1/3 1 1 2 2 3 Single Phase 3-Wire 115 230 1/3 1 115 230 115 230 115 230 115 230 115 230 1/3 1 1 2 1 2 2 3 2 3 — — SAO1a 827. SAG1a 887. Use Size 0 Use Size 0 Use Size 0 Use Size 0 SBO9a SBO1a 998. SBG1a 1061. SBW11a 1715. SBT46a 3686. SBR6a 4613. SBA1a 1314. SCO1a SCO2a 1139. SCG2a 1229. SCW11a 2142. SCT46a 3873. SCR6a 4841. SCA1a 1485. 4-Wire Rep.-Ind. — — SAO2a 855. SAG2a 917. 4-Wire Split Ph. 4-Wire Rep.-Ind. 4-Wire Split Ph. 4-Wire Rep.Ind. 4-Wire Split Ph. — — SAO3a 855. SAG3a 917. SBO10a SBO2a 1026. SBG2a 1088. 3-Pole Single Phase 00 0 1 9 18 27 Use Size 0 Use Size 0 SBW12a 1742. Use Size 0 Use Size 0 SBT47a 3716. Use Size 0 Use Size 0 SBR7a 4649. Use Size 0 Use Size 0 SBA2a 1344. SBO11a SBO3a 1026. SBG3a 1088. SBW13a 1742. SBT48a 3716. SBR8a 4649. SBA3a 1344. SCO3a SCO4a 1169. SCG4a 1259. SCW12a 2169. SCT47a 3900. SCR7a 3227. SCA2a 1515. SCO5a SCO6a 1169. SCG6a 1259. SCW13a 2169. SCT48a 3900. SCR8a 3227. SCA3a 1515. 4-Pole Polyphase 0 18 1 27 2 45 3 90 4 135 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 3 3 SBO13a SBO5a 1310. SBG5a 1368. SBW15a 2028. SBR10a 5040. SBA5a 1629. 5 5 Consult 7-1/2 Square D/ 7-1/2 Electric SCR10a SCO9a SCO10a 1497. SCG10a 1557. SCW15a 2469. Schneider 5297. SCA5a 1814. 10 CIC at 10 1-888-SquareD (1-888-778-2733) 10 — 15 2 Phase — SDO4a 2820. SDG4a 3054. SDW12a 4620. SDR4a 9071. SDA2a 3528. 25 4-Wire — 25 — 25 — — — 30 — — — SEO4a 4671. SEG4a 5103. SEW12a 7238. — — SEA2a 6017. 50 — — — 50 — — — 40 — — — 50 — — — SFO4a 11879. SFG4a 12653. SFW12a 16556. — — SFA2a 14129. 100 — — — 100 — — — a Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed in selection table on page 16-43. b NEMA 7 and 9 bolted are not UL listed. c NEMA 12 enclosure may be field modified for outdoor non-corrosive and non-service-entrance-rated application; see page 16-104 for more information. Table 16.123: Auxiliary Units—Class 8702, 8736 and 8810 The table below shows the maximum number of auxiliary units (in addition to the holding circuit and interlocking contacts) that can be added to either the forward or reverse contactor or starter. NEMA Size (Type) No. of Poles of Basic Contactor Maximum number of auxiliary units on each contactor, forward or reverse. (In addition to internal holding circuit and interlocking contacts.) 00 (SA) 2 or 3 2 single circuit auxiliary contacts (N.O. or N.C.) 0, 1 and 2 (SB, SC and SD) 2 or 3 4 single circuit auxiliary contacts (N.O. or N.C.)d 4 2 single circuit auxiliary contacts (N.O. or N.C.) 3, 4, 5, 6, and 7 (SE, SF, SG, SH, and SJ) Any 2 single circuit auxiliary contacts (N.O. or N.C.) d When adding 4 external auxiliary contacts to one Size 0 or 1 contactor, remove one of the return springs. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-47 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Separate Enclosures (Class 9991) . . . . . . . . . . . . . . . . . . . . . . . page 16-102 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 16 For How to Order Information, see page 16-12. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-44 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Contactors—NEMA Rated 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Class 8736 / Refer to Catalog 8502CT9701 www.schneider-electric.us Class 8736 Type S reversing magnetic starters are used for full-voltage starting, stopping, and reversing AC squirrel cage motors. Class 8736 starters consist of one Class 8502 contactor and one Class 8536 starter mechanically and electrically interlocked. Open type devices, Sizes 0–5, are available in either horizontal or vertical arrangements. Sizes 00, 6, and 7 are available as horizontal only. Enclosed devices use horizontally arranged components. Type S starters are designed for operation at 600 Vac, 50–60 Hz. Overload Relays NEMA Sizes 00, 0, 1 Reversing Starter (Horizontal Type) Class 8736 Type S Size 00–6 reversing starters are provided with melting alloy thermal overload relay as standard. Interchangeable thermal units are available in standard trip Sizes 00–6, as are bimetallic overload relays. Ambient compensated and non-compensated versions are supplied with manual or automatic reset, trip current adjustment, and an alarm contact on Sizes 0–2. Quick trip is available on Sizes 00–4, and slow trip on Sizes 00–3. Single phase starters use one thermal unit; three phase starters use three thermal units. See page 16-125 for selection information. ® Solid State Overload Relay Protection (MOTOR LOGIC ) These ambient insensitive overload relays are available on three phase sizes 00 through 6 and standard on size 7. They provide phase loss, phase unbalance protection. To order, add Form H10 (for Class 10), H20 (for Class 20), or H30 (for selectable trip class protection). For more information about MOTOR LOGIC overload relays, see page 16-91. NEMA Sizes 00, 0, 1 Reversing Starter (Vertical Type) Continuous Current Ratings NEMA Size Table 16.124: NEMA Type 4 & 4X NEMA 1 Watertight, Dusttight General Purpose Brushed Enclosure Stainless Steel Enclosure (Sizes 0–5)a Open Type Motor Voltage Max. Hp Vertical Horizontal $ Price Type Type Type NEMA 7 & 9 c Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G $ Price Type $ Price Bolted Type $ Price Use Size 0 NEMA Type 12/3Rd Dusttight & Driptight Industrial Use Enclosure SPINTOP® $ Price Type Type $ Price Use Size 0 Use Size 0 00 9 200 230 460 575 1-1/2 1-1/2 2 2 — — — — SAO16b 926. SAG16b 989. Use Size 0 0 18 200 230 460 575 3 3 5 5 SBO10b SBO4b 1097. SBG4b 1160. SBW14b 1814. SBT49b 3794. SBR9b 4742. SBA4b 1416. 1 27 200 230 460 575 7-1/2 7-1/2 10 10 SCO7b SCO8b 1241. SCG8b 1331. SCW14b 2241. SCT49b 3978. SCR9b 4976. SCA4b 1587. 2 3 4 5 6 7 a b c d 200 10 230 15 SDO1b SDO2b 2349. SDG2b 2583. SDW11b 4064. SDT43b 6642. SDR3b 8064. SDA1b 3011. 460 25 575 25 25 200 30 230 SEO1b SEO2b 3902. SEG2b 4307. SEW11b 6501. SET43b 10673. SER3b 13343. SEA1b 5247. 90 460 50 575 50 200 40 — — 230 50 — — 135 SFO1b SFO3b 9530. SFG3b 10274. SFW11b 14148. — — SFA1b 11727. 460 100 — — 575 100 — — 200 75 — — 230 100 — — 270 SGO1b SGO3b 18309. SGG3b 22602. SGW11b 25734. — — SGA1b 25734. 460 200 — — 575 200 — — 200 150 — — — 230 200 — — — 540 SHO1b 43205. SHG1b 50331. SHW1b 57452. — — SHA1b 54176. 460 400 — — — 575 400 — — — — — — 200 – — — — 230 300 SJO1b 61250. SJG1b 68736. SJW1b 75497. — — SJA1b 72221. 810 — — — 460 600 600 — — — 575 NEMA 4 and 4X stainless steel enclosures (sizes 0–5) have a brushed finish. Sizes 6 and 7 are painted sheet steel and are rated NEMA 4 only. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown on page 16-46. NEMA 7 and 9 bolted are not UL listed. NEMA 12 enclosure may be field modified for outdoor non-corrosive and non-service-entrance-rated application; see page 16-104 for more information. 45 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-45 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Contactors—NEMA Rated Class 8736 / Refer to Catalog 8502CT9701 www.schneider-electric.us Table 16.125: 600 Vac Maximum—50–60 Hz Note that prices shown do not include thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. NEMA Continuous Motor Current Size Voltage Ratings Max. Hp NEMA 1 General Purpose Enclosure Open Type Type of Motor Vertical Type Horizontal $ Price Type Type $ Price NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure Type $ Price NEMA 12/3Rc Dusttight & Driptight Industrial Use Enclosure NEMA 7 & 9 b Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G Bolted Type TOP® $ Price $ Price SPIN Type Type $ Price 2-Pole Single Phase—1 Thermal Unit Required 115 1/3 — 00 9 SAO13a 863. SAG13a 923. Use Size 0 Use Size 0 Use Size 0 Use Size 0 230 1 — Single 115 1 0 18 Phase SBO7a SBO1a 1034. SBG1a 1094. SBW11a 1751. SBT46a 3722. SBR6a 4656. SBA1a 1350. 230 2 3-Wire 115 2 1 27 SCO1a SCO2a 1175. SCG2a 1265. SCW11a 2177. SCT46a 3909. SCR6a 4883. SCA1a 1521. 230 3 3-Pole Single Phase—1 Thermal Unit Required 115 1/3 4-Wire — SAO14a 891. SAG14a 953. Use Size 0 Use Size 0 Use Size 0 Use Size 0 230 1 Rep.-Ind. — 00 9 115 1/3 4-Wire — SAO15a 594. SAG15a 635. Use Size 0 Use Size 0 Use Size 0 Use Size 0 230 1 Split Ph. — 115 1 4-Wire SBO8a SBO2a 1062. SBG2a 1124. SBW12a 1778. SBT47a 3752. SBR7a 4692. SBA2a 1380. 230 2 Rep.-Ind. 0 18 115 1 4-Wire SBO9a SBO3a 1062. SBG3a 1124. SBW13a 1778. SBT48a 3752. SBR8a 4692. SBA3a 1380. 230 2 Split Ph. 115 2 4-Wire SCO3a SCO4a 1205. SCG4a 1295. SCW12a 2205. SCT47a 3942. SCR7a 4932. SCA2a 1551. 230 3 Rep.Ind. 1 27 115 2 4-Wire SCR8a 4932. SCA3a 1551. SCO5a SCO6a 1205. SCG6a 1295. SCW13a 2205. SCT48a 3942. 230 3 Split Ph. 4-Pole Polyphase—2 Thermal Units Required 200 3 Contact your nearest 230 3 0 18 SBO11a SBO5a 1382. SBG5a 1443. SBW15a 2100. Square D/Schneider SBR10a 5133. SBA5a 1670. 460 5 Electric sales office. 575 5 200 7-1/2 Contact your nearest 230 7-1/2 1 27 SCO9a SCO10a 1566. SCG10a 1629. SCW15a 2541. Square D/Schneider SCR10a 5396. SCA5a 1886. 460 10 Electric sales office. 575 10 200 10 Contact your nearest 230 15 2 Phase 2 45 — SDO4a 2948. SDG4a 3182. SDW12a 4748. Square D/Schneider SDR4a 9248. SDA2a 3609. 460 25 4-Wire Electric sales office. 575 25 200 25 230 30 3 90 — SEO4a 4886. SEG4a 5318. SEW12a 7482. — — — — SEA2a 6228. 460 50 575 50 200 40 230 50 4 135 — SFO4a 12207. SFG4a 12981. SFW12a 16883. — — — — SFA2a 14462. 460 100 575 100 a Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. b NEMA 7 and 9 bolted are not UL listed. c NEMA 12 enclosure may be field modified for outdoor non-corrosive and non-service-entrance-rated application; see page 16-104 for more information. Table 16.126: Coil Voltage Codes Voltage 60 Hz 24ed 120e 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 d 16 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8736SCO1U01S). e These voltage codes must include Form S (supplied at no charge) (i.e., order as 8736SBO7V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-47 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Separate Enclosures (Class 9991) . . . . . . . . . . . . . . . . . . . . . . . page 16-102 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . .page16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS For How to Order Information, see page 16-12. 16-46 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Contactors and Starters—NEMA Rated Class 8702, 8736 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Table 16.127: Open Type—2 or 3-Pole Only Class NEMA Size Type Mounting Dimensions—Inches Figure Number A B C D E F G H I J K L M Weight (lbs.) 00 SAO Horizontal 1 7-1/8 5 5-5/16 — — 3-13/32 15/32 4-11/32 3/16 5-1/2 29/32 — — 12 0, 1 SBO, SCO Horizontal Vertical 1 1a 7-1/8 5-15/32 5 9-7/32 5-5/16 5-5/16 — 5-1/2 — 7/32 3-13/32 — 15/32 39/64 4-11/32 8 3/16 39/64 5-1/2 5-1/32 29/32 7/32 — — — — 12 12 2 SDO Horizontal Vertical 1 1a 9 6-3/4 6-7/8 11-3/8 6-1/32 6-1/32 — 6-1/4 — 1/4 4-1/2 — 3/8 1/2 5-5/8 10-3/8 1/4 1/2 6 1/4 1-1/2 1/4 — — — — 16 16 3 SEO Horizontal Vertical 1 1a 12-23/32 7-13/64 7-31/32 19 7 7 11-3/4 6-1/4 31/64 31/64 — — 31/64 1-1/64 7 17 31/64 63/64 11-3/4 6-1/4 31/64 31/64 — — — — 35 35 4 SFO Horizontal Vertical 1 1a 14-1/4 11-11/16 7-31/32 23-29/32 7 7 13-1/4 7 1/2 31/64 — — 1/2 1-13/16 8 20-1/4 1-27/32 1-3/16 13-1/4 7 1/2 31/64 — — — — 45 45 5 SGO Horizontal Vertical 1 1a 19-5/16 16-3/16 10-3/4 34-13/32 9-3/8 9-3/8 18 9-1/2 21/32 5/8 — — 1-1/32 1-1/4 14 32 1-5/32 1-5/32 18 9-1/2 21/32 5/8 — — — — 98 98 6 SHO Horizontal 1 22-3/8 28-3/64 9-33/64 18 40/64 — 3-53/64 21-3/16 3-1/32 18 49/64 — — 195 7 SJO Horizontal 1 24-1/4 37-1/4 13-13/16 19-3/4 1-33/64 — — 30 — — — — — 310 00 SAO Horizontal 2 7-1/8 6-29/32 5-5/16 — — 3-13/32 15/32 4-11/32 6-7/32 4-17/32 5-1/16 21/32 — 13 0, 1 SBO, SCO Horizontal Vertical 2 2a 7-1/8 6-29/32 5-15/32 11-33/64 5-5/16 5-5/16 — 5-1/32 — 7/32 3-13/32 — 15/32 39/64 4-11/32 6-7/32 8 10-45/64 4-17/32 2-33/64 5-1/16 5-1/16 21/32 7/32 — 5-1/32 13 13 2 SDO Horizontal Vertical 2 2a 6-1/32 6-1/32 — 6-1/4 — 1/4 4-1/2 — 3/8 25/32 5-5/8 10-3/8 7-1/2 12-31/32 5 3-1/8 5-5/32 5-5/32 1-1/2 1/4 — 6 18 18 3 SEO Horizontal Vertical 2 2a 12-23/32 11-23/32 7-5/16 22-1/4 7 7 11-3/4 6-1/4 31/64 31/64 — — 31/64 1-1/64 10-3/4 20-3/4 10-3/4 — 11-3/4 6-1/4 6-1/4 6-1/4 31/64 31/64 11-3/4 6-1/4 38 38 4 SFO Horizontal Vertical 2 2a 14-1/4 14-19/32 7-31/32 26-13/16 7 7 13-1/4 7 1/2 31/64 — — 1-27/32 1-27/32 12-1/4 24-1/2 12-1/4 — 13-1/4 4-3/64 6-1/4 6-1/4 1/2 31/64 13-1/4 7 48 48 5 SGO Horizontal Vertical 2 2a 19-5/16 20-29/32 10-3/4 39-5/32 9-3/8 9-3/8 18 9-1/2 21/32 21/32 — — 1-9/32 1-9/32 19 371/4 19 37-1/4 18 9-1/2 6-5/8 6-5/8 5/8 5/8 18 9-1/2 115 115 6 SHO Horizontal 2 22-3/8 28-3/64 9-33/64 18 44/64 — 3-53/64 21-3/16 3-1/32 18 49/64 — — 200 7 SJO Horizontal 1 24-1/4 37-1/4 13-13/16 19-3/4 1-33/64 — — 30 — — — — — 315 8702 9 6-3/4 8-1/2 13-31/64 8736 a Vertical type design differs from that shown on the corresponding NEMA size horizontal type figure, but dimensions listed apply to that figure. A D A E D E F G F C C G B H H I B RESET L J I K M Figure 2 (Class 8736 Open Type) Figure 1 (Class 8702 Open Type) Table 16.128: NEMA 1 (Class 8702 and 8736) Weight (lbs.) Dimensions—Inches A B 00, 0c 1b 11-7/8 2b 14-7/8 3c 4c b c (4) I Dia. Mtg. Holes A C D E F G 9-3/4 1-1/16 1-1/16 9-3/4 7-21/32 12-3/4 1-1/16 1-1/16 12 15-1/2 1-21/64 1-21/64 26-1/2 1-21/64 7/16 95 98 31 2-7/64 2-7/64 2-7/64 9/16 298 315 400 405 — — 8702 8736 11-7/8 7-13/32 7-17/32 14-1/8 7-9/16 18-5/32 29-5/32 9-1/4 9-1/4 H I 8702 8736 1-1/16 5/16 16 17 1-1/16 5/16 24 25 H B 5 35-7/32 46-7/32 12-13/16 12-15/16 6 36-7/32 62-7/32 7 34-1/2 93 19-15/32 42 Floor Mounting. 23-1/2 Standard enclosure has space for a fused control transformer, Form F4T, on Sizes 0-2, except for Size 0 & 1 4-Pole devices. 3-Pole only. G RESET H E D F C 16 NEMA Size Figure 3—NEMA 1 © 2009 Schneider Electric All Rights Reserved NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS K J 16-47 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Contactors and Starters—NEMA Rated Class 8702, 8736 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Table 16.129: NEMA 4 & 4X—Stainless Steelc Hub Dia. NEMA Size A B 0a 1a 8702 & 8736 12-5/8 2a 8702 & 8736 14-7/8 3b 4b Weight (lbs.) X Top & 8702 8736 Bot. Dimensions—Inches Class Number C D 7-13/16 14-11/16 E F G 2-9/16 7-1/2 13-1/2 19/32 H I J K 3-7/8 18-13/32 1-21/32 3-7/8 20-7/8 W Bot. Only L 2-5/16 5/16 3/4 1 25 1-23/32 2-5/8 5/16 3/4 1-1/2 33 2-9/16 3-3/16 7/16 3/4 2-1/2 96 2-9/16 3-3/16 7/16 3/4 2-1/2 — D B F C 8-1/4 15-3/4 2-9/16 9-3/4 15 3/8 18-5/32 8-3/4 32-7/32 3-5/64 12 30-1/2 7/8 35 8736 18-5/32 9-9/16 32-7/32 3-5/64 12 30-1/2 7/8 8702 35-7/32 12-1/8 49-7/32 4-7/64 27 48 5/8 4-19/32 45-13/16 2-31/32 3-1/2 9/16 3/4 3-1/2 300 — 8736 35-7/32 12-15/16 49-7/32 4-7/64 27 48 5/8 5-13/32 45-13/16 2-31/32 3-1/2 9/16 3/4 3-1/2 — 317 500 505 — — G — (4) L Dia. Mtg. Holes 4-1/2 26-23/32 99 I 5 6 8702 & 8736 36-7/32 19-15/32 70-1/8 W X Floor Mounting 7 8702 & 8736 34-1/2 a b c G 26 8702 3-11/16 26-23/32 A E D 23-1/2 101 J H K Standard enclosure has space for a fused control transformer, Form F4T, on Sizes 0-2, except for Size 0 & 1 4-Pole devices. 3-Pole only. Size 6 & 7 are sheet steel enclosures and are rated NEMA 4 only. NEMA 4 & 4X Stainless Steel Table 16.130: NEMA 4X—Watertight and Corrosion Resistant Glass Polyester Enclosure See page 16-25 for drawing of enclosure. NEMA Size d Class Type 0–2 8702/36 0–2d 8702/36 3–4 8702/36 3–4d 8702/36 Dimensions—Inches No. of Poles A B C E F All 16-7/8 9-25/32 22-3/4 10-1/8 21-1/2 All 24-5/8 11-15/16 27 17-7/8 25-3/4 2,3 26-5/16 11-15/16 33-1/2 18-1/2 32-1/4 4 32-1/2 12-1/8 39-5/16 23-7/8 38-1/8 SBW SCW SDW SBW SCW SDW SEW SFW SEW SFW With control power transformer (Form F4T). Table 16.131: NEMA 7 and 9 Bolted Enclosure See page 16-26 for drawing of enclosure. NEMA Size SBT SCT SDT SET SFT 0–2 3–4 e Dimensions—Inchese G H J K L N P Q, R S, T, U, V Wt. (lbs.) 14-1/4 27-5/8 9-1/2 12-1/4 19-1/4 9-5/8 11-1/2 2-3/8 3-1/8 115 24-1/2 45-5/8 13-3/4 22-1/2 27-1/2 13-3/4 15-3/8 3-7/16 4 180 Type Dimensions shown for 2 or 3-Pole devices only. Table 16.132: NEMA 7 & 9 SPIN TOP® Enclosure See page 16-25 for drawing of enclosure. NEMA Size Type 0-1 SBR SCR 2 12 Bf Bg Cf Cg D Ef 41-1/16 46-1/8 68-1/16 79-1/8 16-3/4 SDR 16-1/8 48-1/2 50-1/2 81-1/2 3 f g Dimensions—Inches A 85 F 7-1/4 12-1/4 20-1/4 12-1/8 SER Eg Gf Gg Hf 7-11/16 26-1/8 26-1/8 9-1/8 8-5/8 27-3/4 32-3/4 Hg Jf Jg K L M N P R Wt. (lbs.) 3 9 24 24 8-1/2 2-1/16 9-3/8 5-1/4 1-1/2 3/8 70 8 4-1/2 25 30 12 2-5/8 11 5-1/2 2-1/2 3/8 100 Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) Without control transformer. With control transformer (Form F4T). Table 16.133: NEMA 12/3R 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS NEMA Size Class Number 0h 1h 2h 3i 4i Weight (lbs.) Dimensions—Inches A B C D E F G 8702 & 8736 11-7/8 7-3/4 13-3/4 2-9/16 6-3/4 12-3/4 1/2 8702 & 8736 14-7/8 7-7/8 16 2-9/16 9-3/4 15 1/2 8702 18-5/32 9-1/4 31-1/2 3-5/64 12 30-1/2 1/2 H I J 8702 8736 3-21/32 18-1/8 5/16 23 24 3-21/32 21-1/4 5/16 31 32 3-11/16 26-23/32 7/16 96 — 99 8736 18-5/32 9-9/16 31-1/2 3-5/64 12 30-1/2 1/2 4-1/2 26-23/32 7/16 — 8702 35-7/32 13-1/8 49 4-1/8 27 48 1/2 5-5/16 45-7/8 9/16 302 — 8736 35-7/32 13-15/16 49 4-1/8 27 48 1/2 6-1/8 45-7/8 9/16 — 319 490 495 — — D 6 8702 & 8736 36-7/32 19-15/32 62-7/32 8702 & 8736 34-1/2 D G F C G 5 7 A E B (4) J Dia. Mtg. Holes Floor Mounting h i 23-1/2 93 I Standard enclosure has space for a fused control transformer, Form F4T, on Sizes 0-2, except for Size 0 & 1 4-Pole devices. 3-Pole only. H NEMA 12 16-48 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Full Voltage Reversing Vacuum Contactors—NEMA Rated Class 8702 / Refer to Catalog 8502CT9701 www.schneider-electric.us Class 8702 Type W Reversing Vacuum Contactors are used to switch capacitors, transformers and electric motors where overload protection is separately provided. Type W reversing vacuum contactors are designed for operation at 600 Volts, 50/60 Hz. Auxiliary Contacts—An auxiliary contact block, Class 9999 Type WX11, with one normally open contact and one normally closed contact, is used with Size 4, 5 and 6 vacuum contactors. Additional auxiliary contact units may be added to the Size 4 and 5 reversing contactors in the field. A maximum of 2 units may be added to the Size 4; a maximum of 1 unit may be added to the Size 5. Termination Means—The Size 4 reversing vacuum contactor is supplied with line and load side lugs. The Size 5 and 6 reversing vacuum contactors are supplied without line and load side lugs. Table 16.134: Class 8702 Full Voltage Reversing Vacuum Contactors (Horizontal Only) 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Enclosed Ampere Rating NEMA Size a 4 135 5 270 6 540 Motor Voltage Maximum Horsepower 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 40 50 75 100 100 75 100 150 200 200 150 200 300 400 400 Open Type Type $ Price WFO3a 10659.00 WGO3a 18678.00 WHO3Va 45666.00 Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed on page 16-50. Replacement coils are listed on page 16-27. Table 16.135: Class 9998—Replacement Coils for Class 8702 Reversing Contactors Size Type 4 5 6 WF WG WH Suffix Number (Complete Coil Number Consists of Class and Type Followed by Suffix Number) Class & Type Poles All All All 120 Volts 110 Volts 120 120 120 9998WF 9998WG 9998WH 240 Volts 220 Volts 240 240 240 480 Volts 440 Volts 480 480 480 $ Price 600 Volts 550 Volts 600 600 600 732.00 1724.00 1904.00 Table 16.136: Class 9999—Vacuum Starter Kits For Use With Type WF–WG WH Size 4–5 6 WF WG–WH 4 5–6 WG 5 Kit Description Class 9999 Type $ Price Auxiliary Contacts, Non-Convertible 1 N.O. & 1 N.C. Isolated Contacts Coil Circuit Auxiliary Contacts 1 N.O. & 1 N.C. Isolated Contacts, Delayed Break 1 N.C. Isolated Contact Lug Kits (6) lugs included WX11 122.00 WCX11 WLX01 114.00 503.00 22.00 5.81 4.00 2.50 3.65 6.90 .60 LUW5 275.00 .86 2.75 Table 16.137: Coil Voltage Codes Volts 50 Hz 60 Hz 110 V02 120 220 V03 V02 0.38 1.76 240 440 V06 V03 480 550 V07 600 1 2 3 V06 4 5 6 V07 7 8 9 14.00 0 1 2 Approximate Dimensions 18.00 1.5 Over travel Gauge Mechanical Interlock 4.88 3.50 .281 dia 3 mtg. holes .44 2.00 Name Plate 2.48 Recess For Auxiliary Interlock 3.98 3.75 4.20 2.50 1.89 9.56 1.40 4.26 8.80 max 6.00 6.88 overtravel gauge 24.00 Size 5 Reversing Contactor Outline without Lugs Class 8702 WG 7.00 Rear View Drilling Plan 1.44 1.44 9.75 6.50 Front View 6.54 3.90 3.40 Side View Size 4 Reversing Contactor Outline with Lugs Class 8702 WF 16.40 5.00 14.00 18.00 For How to Order Information, see page 16-12. Name Plate 3.75 2.00 22.00 24.00 2.70 2.70 4.40 1.40 7.75 16 1.50 7.75 Size 6 Reversing Contactor Outline without Lugs Class 8702 WH © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 4.40 2.70 2.70 1.13 16-49 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Combination Starters—NEMA Rated Class 8738 / Refer to Catalog 8538CT9701 www.schneider-electric.us Class 8738 and 8739 Type S reversing combination starters combine the requirements of motor overload and short circuit protection into one convenient package. Type S reversing combination starters are manufactured in accordance with NEMA standards, and are UL Listed (although some Form numbers may not be listed—contact your nearest Square D/Schneider Electric sales office for further information). Class 8738 and 8739 reversing combination starters are designed to operate at 600 Vac, 50–60 Hz—and are supplied with melting alloy overload relays as standard. For Class J fuses, use form Y1072 (No Charge). Class 8738 Fusible Disconnect Switch Type Note: that the prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. 00 Table 16.138: Class 8738 Full-Voltage Type, Fusible (With Class H Fuse Clips) Reversing with Melting Alloy Overload Relays—3-Pole Polyphase—600 Vac Maximum—50–60 Hz Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase 3 5 7-1/2 200 (208) b Type $ Price Type $ Price With External Reset Without External Reset Type Type $ Price 30 SBG12b 2169.00 SBW12b 3909.00 SBW22b 4491.00 SBA22b SBA12b 2654.00 30 SCG12b 2313.00 SCW12b 4050.00 SCW22b 4656.00 SCA22b SCA12b 2798.00 60 SCG13b 2340.00 SCW13b 4077.00 SCW23b 4692.00 SCA23b SCA13b 2825.00 SDG12b 3851.00 SDW12b 6501.00 SDW22b 7149.00 SDA22b SDA12b 4478.00 20 3 100 SEG15b 6357.00 SEW15b 11001.00 — — SEA25b SEA15b 7182.00 40 4 200 SFG15b 13409.00 SFW15b 19277.00 — — SFA25b SFA15b 15672.00 75 5 400 SGG15b 25605.00 SGW15b 40589.00 — — SGA25b SGA15b 30990.00 3 0 30 SBG12b 2169.00 SBW12b 3909.00 SBW22b 4491.00 SBA22b SBA12b 2654.00 30 SCG12b 2313.00 SCW12b 4050.00 SCW22b 4656.00 SCA22b SCA12b 2798.00 60 SCG13b 2340.00 SCW13b 4077.00 SCW23b 4692.00 SCA23b SCA13b 2825.00 7149.00 SDA22b SDA12b 4478.00 SEA25b SEA15b 7182.00 1 15 2 60 SDG12b 3851.00 SDW12b 6501.00 SDW22b 25 3 100 SEG15b 6357.00 SEW15b 11001.00 — — 50 4 200 SFG15b 13409.00 SFW15b 19277.00 — — SFA25b SFA15b 15672.00 100 5 400 SGG15b 25605.00 SGW15b 40589.00 — — SGA25b SGA15b 30990.00 5 0 30 SBG13b 2199.00 SBW13b 3936.00 SBW23b 4527.00 SBA23b SBA13b 2682.00 10 1 30 SCG14b 2340.00 SCW14b 4077.00 SCW24b 4692.00 SCA24b SCA14b 2825.00 25 2 30 SDG16b 3873.00 SDW16b 6515.00 SDW26b 7163.00 SDA26b SDA16b 4491.00 60 SDG14b 3893.00 SDW14b 6543.00 SDW24b 7199.00 SDA24b SDA14b 4521.00 50 3 100 SEG13b 6443.00 SEW13b 11087.00 — — SEA23b SEA13b 7268.00 100 4 200 SFG13b 13464.00 SFW13b 19332.00 — — SFA23b SFA13b 15728.00 200 5 400 SGG13b 26204.00 SGW13b 41187.00 — — SGA23b SGA13b 31589.00 5 0 30 SBG13b 2199.00 SBW13b 3936.00 SBW23b 4527.00 SBA23b SBA13b 2682.00 10 1 30 SCG14b 2340.00 SCW14b 4077.00 SCW24b 4692.00 SCA24b SCA14b 2825.00 30 SDG16b 3873.00 SDW16b 6515.00 SDW26b 7163.00 SDA26b SDA16b 4491.00 7199.00 15 a $ Price NEMA 12/3Ra Dusttight and Driptight Industrial Use Enclosure 60 15 575 (600) 1 Type NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure 2 7-1/2 460 (480) 0 Fuse Clip Size Amps NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) 10 5 230 (240) NEMA Size NEMA 1 General Purpose Enclosure 25 2 60 SDG14b 3893.00 SDW14b 6543.00 SDW24b SDA24b SDA14b 4521.00 50 3 100 SEG13b 6443.00 SEW13b 11087.00 — — SEA23b SEA13b 7268.00 100 4 200 SFG13b 13464.00 SFW13b 19332.00 — — SFA23b SFA13b 15728.00 200 5 400 SGG13b 26204.00 SGW13b 41187.00 — — SGA23b SGA13b 31589.00 NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. For class J fuse clip, use Form Y1072 (no charge). Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Table 16.139: Coil Voltage Codes 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Voltage Code $ Price Adder 60 Hz 50 Hz 24dc — V01 No Charge 120d 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge 277 — V04 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 c 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8738SBG12V01S). d These voltage codes must include Form S (supplied at no charge) (i.e., order as 8738SC13V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-56 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-50 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Combination Starters—NEMA Rated Non-Fusible and Fusible Disconnect Switch Type Class 8738 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note: that the prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.140: Non-Fusible Disconnect Switch Type—Full-Voltage Type Reversing with Melting Alloy Overload Relays Ratings Motor Voltage (Starter Voltage) 200 (208) 230 (240) 460 (480) 575 (600) Max. Hp PolyPhase NEMA Size 3 7-1/2 10 25 40 75 3 7-1/2 15 30 50 100 5 10 25 50 100 200 5 10 25 50 100 200 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 a b Fuse Clip Size Amps NEMA 1 General Purpose Enclosure NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosure NEMA 12/3Ra Dusttight and Driptight Industrial Use Enclosure With External Reset Without External Reset $ Price Type $ Price Type $ Price Type $ Price Type Type None SBG11b 2127.00 SBW11b 3866.00 SBW21b 4442.00 SBA21b SBA11b 2613.00 None SCG11b 2271.00 SCW11b 4008.00 SCW21b 4607.00 SCA21b SCA11b 2754.00 None SDG11b 3794.00 SDW11b 6443.00 SDW21b 7083.00 SDA21b SDA11b 4419.00 None SEG11b 6287.00 SEW11b 10929.00 — — SEA21b SEA11b 7113.00 None SFG11b 13166.00 SFW11b 19034.00 — — SFA21b SFA11b 15431.00 None SGG11b 25691.00 SGW11b 40674.00 — — SGA21b SGA11b 31076.00 None SBG11b 2127.00 SBW11b 3866.00 SBW21b 4442.00 SBA21b SBA11b 2613.00 None SCG11b 2271.00 SCW11b 4008.00 SCW21b 4607.00 SCA21b SCA11b 2754.00 None SDG11b 3794.00 SDW11b 6443.00 SDW21b 7083.00 SDA21b SDA11b 4419.00 None SEG11b 6287.00 SEW11b 10929.00 — — SEA21b SEA11b 7113.00 None SFG11b 13166.00 SFW11b 19034.00 — — SFA21b SFA11b 15431.00 None SGG11b 25691.00 SGW11b 40674.00 — — SGA21b SGA11b 31076.00 SBA21b SBA11b 2613.00 None SBG11b 2127.00 SBW11b 3866.00 SBW21b 4442.00 None SCG11b 2271.00 SCW11b 4008.00 SCW21b 4607.00 SCA21b SCA11b 2754.00 None SDG11b 3794.00 SDW11b 6443.00 SDW21b 7083.00 SDA21b SDA11b 4419.00 None SEG11b 6287.00 SEW11b 10929.00 — — SEA21b SEA11b 7113.00 None SFG11b 13166.00 SFW11b 19034.00 — — SFA21b SFA11b 15431.00 None SGG11b 25691.00 SGW11b 40674.00 — — SGA21b SGA11b 31076.00 None SBG11b 2127.00 SBW11b 3866.00 SBW21b 4442.00 SBA21b SBA11b 2613.00 None SCG11b 2271.00 SCW11b 4008.00 SCW21b 4607.00 SCA21b SCA11b 2754.00 None SDG11b 3794.00 SDW11b 6443.00 SDW21b 7083.00 SDA21b SDA11b 4419.00 None SEG11b 6287.00 SEW11b 10929.00 — — SEA21b SEA11b 7113.00 None SFG11b 13166.00 SFW11b 19034.00 — — SFA21b SFA11b 15431.00 None SGG11b 25691.00 SGW11b 40674.00 — — SGA21b SGA11b 31076.00 NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown on page 16-59. Table 16.141: Fusible Disconnect Switch Type With Class R Fuse Clips—100,000 AIC Rating Motor Voltage (Starter Voltage) 200 (208) 230 (240) 460 (480) 575 (600) Max. Hp PolyPhase 3 5 7-1/2 10 20 40 75 3 5 7-1/2 15 25 50 100 5 10 15 25 50 100 200 5 10 15 25 50 100 200 NEMA Size 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 c d e Fuse Clip Size Amps NEMA 1 General Purpose Enclosure NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) NEMA 4X Watertight, Dusttight and Corrosion Resistant Polyester Enclosuree NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure With External Reset Without External Reset $ Price Type $ Price Type $ Price Type $ Price Type Type 30 SBG32d 2192.00 SBW32d 3929.00 SBW42d 4521.00 SBA42d SBA32d 2676.00 30 SCG32d 2334.00 SCW32d 4071.00 SCW42d 4685.00 SCA42d SCA32d 2817.00 60 SCG33d 2363.00 SCW33d 4100.00 SCW43d 4706.00 SCA43d SCA33d 2847.00 60 SDG32d 3873.00 SDW32d 6521.00 SDW42d 7176.00 SDA42d SDA32d 4499.00 SEW35d 11043.00 — — SEA45d SEA35d 7226.00 100 SEG35d 6399.00 200 SFG35d 13451.00 SFW35d 19319.00 — — SFA45d SFA35d 15714.00 400 SGG35d 25707.00 SGW35d 40689.00 — — SGA45d SGA35d 31089.00 30 SBG32d 2192.00 SBW32d 3929.00 SBW42d 4521.00 SBA42d SBA32d 2676.00 30 SCG32d 2334.00 SCW32d 4071.00 SCW42d 4685.00 SCA42d SCA32d 2817.00 60 SCG33d 2363.00 SCW33d 4100.00 SCW43d 4706.00 SCA43d SCA33d 2847.00 60 SDG32d 3873.00 SDW32d 6521.00 SDW42d 7176.00 SDA42d SDA32d 4499.00 100 SEG35d 6399.00 SEW35d 11043.00 — — SEA45d SEA35d 7226.00 200 SFG35d 13451.00 SFW35d 19319.00 — — SFA45d SFA35d 15714.00 400 SGG35d 25707.00 SGW35d 40689.00 — — SGA45d SGA35d 31089.00 30 SBG33d 2219.00 SBW33d 3959.00 SBW43d 4548.00 SBA43d SBA33d 2705.00 30 SCG34d 2363.00 SCW34d 4100.00 SCW44d 4712.00 SCA44d SCA34d 2847.00 30 SDG36d 3893.00 SDW36d 6534.00 SDW46d 7191.00 SDA46d SDA36d 4514.00 60 SDG34d 3915.00 SDW34d 6564.00 SDW44d 7433.00 SDA44d SDA34d 4541.00 100 SEG33d 6485.00 SEW33d 11129.00 — — SEA43d SEA33d 7311.00 200 SFG33d 13508.00 SFW33d 19376.00 — — SFA43d SFA33d 15771.00 400 SGG33d 26303.00 SGW33d 41288.00 — — SGA43d SGA33d 31688.00 30 SBG33d 2219.00 SBW33d 3959.00 SBW43d 4548.00 SBA43d SBA33d 2705.00 30 SCG34d 2363.00 SCW34d 4100.00 SCW44d 4712.00 SCA44d SCA34d 2847.00 30 SDG36d 3893.00 SDW36d 6534.00 SDW46d 7191.00 SDA46d SDA36d 4514.00 60 SDG34d 3915.00 SDW34d 6564.00 SDW44d 7433.00 SDA44d SDA34d 4541.00 100 SEG33d 6485.00 SEW33d 11129.00 — — SEA43d SEA33d 7311.00 200 SFG33d 13508.00 SFW33d 19376.00 — — SFA43d SFA33d 15771.00 400 SGG33d 26303.00 SGW33d 41288.00 — — SGA43d SGA33d 31688.00 NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown on page 16-52. 5,000 AIC Rating 16 For How to Order Information, see page 16-12. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Ratings © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-51 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Mag-Gard® Circuit Breaker Reversing Combination Starters—NEMA Rated Class 8739 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.142: Full-Voltage Type, Reversing with Melting Alloy Overload Relays NEMA Type 1 General Purpose Enclosure Ratings Motor Voltage (Starter Voltage) 200 (208) NEMA 7 & 9b For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G Without External Reset Type Type 5297. SBA51d SBA52d SBA53d SBA41d SBA42d SBA43d 3038. SCT41d SCT42d SCT43d SCT44d SCT45d 5489. SCA51d SCA52d SCA53d SCA54d SCA55d SCA41d SCA42d SCA43d SCA44d SCA45d 3209. SDT41d SDT42d SDT43d 8153. SDA51d SDA52d SDA53d SDA41d SDA42d SDA43d 4976. SEA52d SFA52d SFA53d SGA52d SGA54d SGA55d SHA53d SHA54d SHA55d SEA42d SFA42d SFA43d SGA42d SGA44d SGA45d SHA43d SHA44d SHA45d NEMA Size 1/4–1/3 1/2–1 11/2–3 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41d SBG42d SBG43d 2555. SBW41d SBW42d SBW43d 4292. SBW51d SBW52d SBW53d 4932. SBR41d SBR42d SBR43d 5297. SBT41d SBT42d SBT43d 1/4–1/3 1/2–1 11/2–3 5 7-1/2 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 GJL36050M05 SCG41d SCG42d SCG43d SCG44d SCG45d 2726. SCW41d SCW42d SCW43d SCW44d SCW45d 4463. SCW51d SCW52d SCW53d SCW54d SCW55d 5133. SCR41d SCR42d SCR43d SCR44d SCR45d 5489. 1-1/2–3 5 71/2–10 2 GJL36015M03 GJL36030M04 GJL36050M05 SDG41d SDG42d SDG43d 4350. SDW41d SDW42d SDW43d 6998. SDW51d SDW52d SDW53d 7695. SDR41d SDR42d SDR43d 8153. FAL3610018M KAL3625025M KAL3625026M KAL3625030M LAL3640032M LAL3640033M LAL3640036M MAL3660040M MAL3660042M SEG42d SFG42d SFG43d SGG42d SGG44d SGG45d SHG43d SHG44d SHG45d 29808. 3 4 5 6 Type $ Price 6501. 14718. 64274. Type $ Price SEW42d SFW42d SFW43d SGW42d SGW44d SGW45d SHW43d SHW44d SHW45d 11142. 44792. 20586. 71396. ® $ Price SPIN TOP $ Price Type Type SEW52d SFW52d SFW53d — — — — — — NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure With External Reset Hp Range Polyphase 15–25 30 40 50 60 75 100 125 150 230 (240) Circuit Breaker (See Page 7-32 for Breaker Adjustment Range) NEMA NEMA 4X 4 & 4X Watertight Watertight Dusttight and Dusttight and Corrosion Enclosure Resistant Stainless Steel (304) Polyester Enclosure (Sizes 0-5)a Bolted Type $ Price 12254. — — — — 22644. — — — — — — — — — — — — — — — — — — — — — — $ Price 7326. 16982. 35190. 68120. 1/4–1/3 1/2–1 11/2–3 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41d SBG42d SBG43d 2555. SBW41d SBW42d SBW43d 4292. SBW51d SBW52d SBW53d 4932. SBR41d SBR42d SBR43d 5297. SBT41d SBT42d SBT43d 5297. SBA51d SBA52d SBA53d SBA41d SBA42d SBA43d 3038. 1/4–1/3 1/2–1 11/2–3 5–7-1/2 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 SCG41d SCG42d SCG43d SCG44d 2726. SCW41d SCW42d SCW43d SCW44d 4463. SCW51d SCW52d SCW53d SCW54d 5133. SCR41d SCR42d SCR43d SCR44d 5489. SCT41d SCT42d SCT43d SCT44d 5489. SCA51d SCA52d SCA53d SCA54d SCA41d SCA42d SCA43d SCA44d 3209. 1-1/2–3 5–7-1/2 10 15 2 GJL36015M03 GJL36030M04 GJL36050M05 GJL36075M06 SDG41d SDG42d SDG43d SDG44d 4350. SDW41d SDW42d SDW43d SDW44d 6998. SDW51d SDW52d SDW53d SDW54d 7695. SDR41d SDR42d SDR43d SDR44d 8153. SDT41d SDT42d SDT43d SDT44d 8153. SDA51d SDA52d SDA53d SDA54d SDA41d SDA42d SDA43d SDA44d 4976. 15–30 40 50 60 75 100 125–150 200 3 4 5 6 FAL3610018M SEG42d 6501. SEW42d 11142. SEW52d 12254. — — — — SEA52d SEA42d 7326. KAL3625026M SFG43d 14718. SFW43d — SFA53d SFA43d 20586. SFW53d 22644. — — — 16982. KAL3625029M SFG44d SFW44d SFW54d — SFA54d SFA44d KAL3625031M SGG43d SGW43d — — — SGA53d SGA43d LAL3640032M SGG44d 29808. SGW44d 44792. — — — — — — SGA54d SGA44d 35190. LAL3640035M SGG46d SGW46d — — — SGA56d SGA46d MAL3660040M SHG44d 64274. SHW44d 71396. — — — SHA54d SHA44d — — — 68120. MAL3660044M SHG46d SHW46d — — — SHA56d SHA46d a NEMA Size 6 starters are NEMA 4 painted sheet steel enclosures. b NEMA 7 & 9 bolted are not UL Listed. c NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed below. Table 16.143: Coil Voltage Codes Voltage 16 60 Hz 24fe 120f 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 e NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8739SBG41V01S). f These voltage codes must include Form S (supplied at no charge) (i.e., order as 8739SCG41V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-56 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-52 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Mag-Gard® Circuit Breaker Reversing Combination Starters—NEMA Rated Class 8739 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.144: Full-Voltage Type, Reversing with Melting Alloy Overload Relays NEMA Type 1 General Purpose Enclosure Ratings Motor Voltage (Starter Voltage) 460 (480) 575 (600) NEMA 4 & 4X NEMA 4X Watertight Watertight and Dusttight Dusttight Enclosure and Corrosion Stainless Steel (304) Resistant (Sizes 0–5)a Polyester Enclosure NEMA 7 & 9b For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure Circuit Breaker (See Page 7-32 for Breaker Adjustment Range) Type 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41d SBG42d SBG43d 2555. SBW41d SBW42d SBW43d 4292. SBW51d SBW52d SBW53d 4932. SBR41d SBR42d SBR43d 5297. SBT41d SBT42v SBT43d 1/4–1 1-1/2–3 5–7-1/2 10 1 GJL36003M01 GJL36007M02 GJL36015M03 GJL36030M04 SCG41d SCG42d SCG43d SCG44d 2726. SCW41d SCW42d SCW43d SCW44d 4463. SCW51d SCW52d SCW53d SCW54d 5133. SCR41d SCR42d SCR43d SCR44d 5489. 5–7-1/2 10–15 20–25 2 GJL36015M03 GJL36030M04 GJL36050M05 SDG41d SDG42d SDG43d 4350. SDW41d SDW42d SDW43d 6998. SDW51d SDW52d SDW53d 7695. SDR41d SDR42d SDR43d 8153. GJL36050M05 FAL3610018M KAL3625025M KAL3625029M KAL3625031M LAL3640032M LAL3640035M LAL3640036M MAL3660040M MAL3660042M MAL3660044M SEG41d SEG42d SFG42d SFG44d SGG43d SGG44d SGG46d SHG43d SHG44d SHG45d SHG46d 12254. — — — — 22644. — — — — — — — — — — — — Hp Range Polyphase NEMA Size 1/4–1 1-1/2–3 5 20–25 30–50 60–75 100 125 150 200 250 300 350 400 3 4 5 6 $ Price 6501. 14718. 29808. 64274. Type $ Price SEW41d SEW42d SFW42d SFW44d SGW43d SGW44d SGW46d SHW43d SHW44d SHW45d SHW46d 44792. 11142. 20586. 71396. Type ® $ Price SPIN TOP $ Price Type SEW51d SEW52d SFW52d SFW54d — — — — — — — — — — — With External Reset Without External Reset Type Type 5297. SBA51d SBA52d SBA53d SBA41d SBA42d SBA43d 3038. SCT41d SCT42d SCT43d SCT44d 5489. SCA51d SCA52d SCA53d SCA54d SCA41d SCA42d SCA43d SCA44d 3209. SDT41d SDT42d SDT43d 8153. SDA51d SDA52d SDA53d SDA41d SDA42d SDA43d 4976. SEA51d SEA52d SFA52d SFA54d SGA53d SGA54d SGA56d SHA53d SHA54d SHA55d SHA56d SEA41d SEA42d SFA42d SFA44d SGA43d SGA44d SGA46d SHA43d SHA44d SHA45d SHA46d Bolted Type — — — — — — — $ Price — — $ Price 7326. 16982. 35190. 68120. 1/4–1 1-1/2–3 5 0 GJL36003M01 GJL36007M02 GJL36015M03 SBG41d SBG42d SBG43d 2555. SBW41d SBW42d SBW43d 4292. SBW51d SBW52d SBW53d 4932. SBR41d SBR42d SBR43d 5297. SBT41d SBT42d SBT43d 5297. SBA51d SBA52d SBA53d SBA41d SBA42d SBA43d 3038. 1/4–1 1-1/2–3 5–10 1 GJL36003M01 GJL36007M02 GJL36015M03 SCG41d SCG42d SCG43d 2726. SCW41d SCW42d SCW43d 4463. SCW51d SCW52d SCW53d 5133. SCR41d SCR42d SCR43d 5489. SCT41d SCT42d SCT43d 5489. SCA51d SCA52d SCA53d SCA41d SCA42d SCA43d 3209. 5–10 15–20 25 2 GJL36015M03 GJL36030M04 GJL36050M05 SDG41d SDG42d SDG43d 4350. SDW41d SDW42d SDW43d 6998. SDW51d SDW52d SDW53d 7695. SDR41d SDR42d SDR43d 8153. SDT41d SDT42d SDT43d 8153. SDA51d SDA52d SDA53d SDA41d SDA42d SDA43d 4976. 25–30 40–50 60–100 125 150 200 250 300 350–400 3 4 5 6 GJL36050M05 SEG41d SEW51d — SEA51d SEA41d 6501. SEW41d — — — 7326. FAL3610018M SEG42d SEW42d 11142. SEW52d 12254. — SEA52d SEA42d KAL3625025M SFG42d 14718. SFW42d 20586. SFW52d 22644. — — — — SFA52d SFA42d 16982. KAL3625029M SGG41d SGW41d — — — SGA51d SGA41d KAL3625030M SGG42d 29808. SGW42d 44792. — — — — — — SGA52d SGA42d 35190. LAL3640032M SGG44d SGW44d — — — SGA54d SGA44d LAL3640035M SHG42d SHW42d — — — SHA52d SHA42d LAL3640036M SHG43d 64274. SHW43d 71396. — — — — — — SHA53d SHA43d 68120. MAL3660040M SHG44d SHW44d — — — SHA54d SHA44d a NEMA Size 6 starters are NEMA 4 painted sheet steel enclosures. b NEMA 7 & 9 bolted are not UL Listed. c NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes listed below. Table 16.145: Coil Voltage Codes Voltage 60 Hz 24fe 120f 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 e NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8739SBG41V01S). f These voltage codes must include Form S (supplied at no charge) (i.e., order as 8739SCG41V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-56 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-109 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . .page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . .page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-53 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Combination Starters—NEMA Rated Thermal Magnetic Circuit Breaker Class 8739 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.146: Full-Voltage Type, Reversing with Melting Alloy Overload Relays NEMA Type 1 General Purpose Enclosure Ratings Motor Voltage (Starter Voltage) Max. Hp Polyphase 2 3 5 7-1/2 200 (208) 10 15 20 25 30 40 50 60 75 100 125 150 2 3 5 7-1/2 230 (240) 10 15 20 25 30 40 50 60 75 100 125 150 200 NEMA Size Circuit Breaker Type FALe Ampere Rating 15 20 SBG1d SBG3d 1 FALe 35 50 2 FALe FAL FAL KAL Type 0 5 LAL 6 MAL 0 FALe 60 90 100 110 125 200 200 250 300 450 600 600 15 20 1 FALe 30 45 2 FALe 3 FAL FAL KAL 4 KAL 5 LAL LAL LAL 6 MAL 3 4 NEMA 4 & 4X NEMA 4X Watertight Watertight and Dusttight Dusttight Enclosure and Corrosion Stainless Steel (304) Resistant (Sizes 0-5)a Polyester Enclosure KAL a b c d e $ Price Type 2228. SBW1d SBW3d SCG5d SCG2d SDG1d SEG3d SEG1d SEG5d SFG3d SFG4d SGG6d SGG1d SGG4d SHG4d SHG3d SHG5d SBG1d SBG3d SCG1d SCG6d $ Price Type NEMA 7 & 9b For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G ® $ Price SPIN TOP $ Price Type Bolted Type $ Price With External Reset Type Type 4563. SBR1d SBR3d 4940. SBT1d SBT3d 4940. SBA11d SBA13d SBA1d SBA3d 2712. 5126. SCT5d SCT2d 5126. SCA15d SCA12d SCA5d SCA2d 2883. 7788. SDT1d 7788. SDA1d SEA3d SEA1d SEA5d SFA3d SFA4d SGA6d SGA1d SGA4d SHA4d SHA3d SHA5d SBA1d SBA3d 4649. SCA1d SCA6d 3965. SBW11d SBW13d 2399. SCW5d SCW2d 4136. SCW15d SCW12d 4761. SCR5d SCR2d 4022. 6672. 3965. SDW11d SEW13d SEW11d SEW15d SFW13d SFW14d — — — — — — SBW11d SBW13d 7340. 2228. SDW1d SEW3d SEW1d SEW5d SFW3d SFW4d SGW6d SGW1d SGW4d SHW4d SHW3d SHW5d SBW1d SBW3d 4563. SDR1d — — — — — — — — — — — SBR1d SBR3d 2399. SCW1d SCW6d 4136. SCW11d SCW16d 4761. SCR1d SCR6d 6501. 14718. 29808. 64274. 11142. 20586. 44792. 71396. NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure 12254. 22644. — — 4940. — — — — — — SBT1d SBT3d 4940. SDA11d SEA13d SEA12d SEA15d SFA13d SFA14d SGA16d SGA11d SGA14d SHA14d SHA13d SHA15d SBA11d SBA13d 5126. SCT1d SCT6d 5126. SCA11d SCA16d — — — — — — — — — — Without External Reset $ Price` 7326. 16982. 35190. 68120. 2712. 2883. 60 SDG1d SDR1d SDA1d 4022. SDW1d 6672. SDW11d 7340. 7788. SDT1d 7788. SDA11d 4649. 80 SDG7d SDW7d SDW17d SDR7d SDT7d SDA17d SDA7d 90 SEG3d SEW3d SEW13d — SEA13d SEA3d 100 SEG1d 6501. SEW1d 11142. SEW11d 12254. — — — — SEA11d SEA1d 7326. 110 SEG5d SEW5d SEW15d — SEA15d SEA5d 150 SFG1d SFW1d SFW11d — SFA11d SFA1d 14718. SFW4d 20586. SFW14d 22644. — — — 16982. 200 SFG4d — SFA14d SFA4d 225 SGG3d SGW3d — — — SGA13d SGA3d 250 SGG1d 29808. SGW1d 44792. — — — — — — SGA11d SGA1d 35190. 350 SGG2d SGW2d — — — SGA12d SGA2d 450 SHG4d SHW4d — — — SHA14d SHA4d 600 SHG3d 64274. SHW3d 71396. — — — — — — SHA13d SHA3d 68120. 800 SHG7d SHW7d — — — SHA17d SHA7d NEMA Size 6 starters are NEMA 4 painted sheet steel enclosures. NEMA 7 and 9 bolted are not UL Listed. NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. Rated 250 volts max. Coil Voltage Codes Voltage 60 Hz 24gf 120g 208 240 277 480 600 Specify 50 Hz — 110 — 220 — 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 f 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8739SBG1V01S). g These voltage codes must include Form S (supplied at no charge) (i.e., order as 8739SCG5V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-56 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-54 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Combination Starters—NEMA Rated Thermal Magnetic Circuit Breaker Class 8739 / Refer to Catalog 8538CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 3 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.147: Full-Voltage Type, Reversing with Melting Alloy Overload Relays NEMA Type 1 General Purpose Enclosure Ratings Max. Hp Polyphase Circuit Breaker NEMA Size Type 5 $ Price Type Type $ Price SBG2d 2555. SBW2d 4292. SBW12d 4932. SBR2d 5297. SBT2d 5297. SBA12d SBA2d 3038. 20 25 SCG3d SCG7d 2726. SCW3d SCW7d 4463. SCW13d SCW17d 5133. SCR3d SCR7d 5489. SCT3d SCT7d 5489. SCA13d SCA17d SCA3d SCA7d 3209. SDG3d SDG4d SDG5d SEG6d SEG3d SEG1d SFG5d SFG3d SFG4d SGG3d SGG1d SGG2d SHG4d SHG3d SHG5d SHG7d SBG2d 5297. SDA13d SDA14d SDA15d SEA16d SEA13d SEA11d SFA15d SFA13d SFA14d SGA13d SGA11d SGA12d SHA14d SHA13d SHA15d SHA17d SBA12d SDA3d SDA4d SDA5d SEA6d SEA3d SEA1d SFA5d SFA3d SFA4d SGA3d SGA1d SGA2d SHA4d SHA3d SHA5d SHA7d SBA2d SCG8d SCG3d 5489. SCA18d SCA13d SCA8d SCA3d SDA18d SDA19d SDA14d SEA14d SEA16d SEA13d SFA16d SFA15d SFA11d SGA17d SGA16d SGA11d SHA16d SHA14d SHA12d SHA13d SDA8t SDA9d SDA4d SEA4d SEA6d SEA3d SFA6d SFA5d SFA1d SGA7d SGA6d SGA1d SHA6d SHA4d SHA2d SHA3d 15 35 SDG8d SDW8d 20 2 FAL 45 SDG9d 4350. SDW9d 6998. 25 60 SDG4d SDW4d 30 60 SEG4d SEW4d 40 3 FAL 80 SEG6d 6501. SEW6d 11142. 50 90 SEG3d SEW3d 575 (600) 60 FAL 100 SFG6d SFW6d 75 4 KAL 110 SFG5d 14718. SFW5d 20586. 100 KAL 150 SFG1d SFW1d 125 KAL 200 SGG7d SGW7d 150 5 LAL 200 SGG6d 29808. SGW6d 44792. 200 LAL 250 SGG1d SGW1d 250 350 SHG6d SHW6d 300 400 SHG4d 6 MAL 64274. SHW4d 71396. 350 500 SHG2d SHW2d 400 600 SHG3d SHW3d a NEMA Size 6 starters are NEMA 4 painted sheet steel enclosures. b NEMA 7 and 9 bolted are not UL Listed. c NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-serviceentrance-rated applications; see page 16-104 for more information. d Coil voltage code must be specified to order this product. Refer to standard coil voltage codes shown below. SDW18d SDW19d SDW14d SEW14d SEW16d SEW13d SFW16d SFW15d SFW11d — — — — — — — 2 FAL 3 FAL 4 KAL 5 LAL 6 MAL 0 FAL 40 60 70 80 90 100 110 125 200 225 250 350 450 600 600 800 15 1 FAL 15 20 2555. SDW3d SDW4d SDW5d SEW6d SEW3d SEW1d SFW5d SFW3d SFW4d SGW3d SGW1d SGW2d SHW4d SHW3d SHW5d SHW7d SBW2d 2726. SCW8d SCW3d 4350. 6501. 14718. 29808. 64274. 6998. 11142. 20586. 44792. 71396. Table 16.148: Class 8738 UL Listed Short Circuit Ratings Fuse Clip Type Standard Class R Standard Class R Amps Interrupting Capability Rating (AIC) 5,000 100,000 10,000 100,000 Enclosure Standarde Standarde Standarde Standarde Voltage 50 Hz — 110 — 220 440 550 Specify $ Price Adder V01 V02 V08 V03 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge 35.60 5133. SCR8d SCR3d 7695. 12254. 22644. — — 7695. 12254. 22644. — — SDR8d SDR9d SDR4d — — — — — — — — — — — — — 5297. SDT3d SDT4d SDT5d SET6d SET3d SET1d SFT5d SFT3d SFT4d — — — — — — — SBT2d 5489. SCT8d SCT3d 8153. — — — — 8153. — — — — SDT8d SDT9d SDT4d SET4d SET6d SET3d SFT6d SFT5d SFT1d — — — — — — — 8153. 13599. 26132. — — 8153. 13599. 26132. — — 4976. 7326. 16982. 35190. 68120. 3038. 3209. 4976. 7326. 16982. 35190. 68120. Mag-Gard® Motor Circuit Protector Type NEMA Size 0 & 1, 2 (GJL) 0 & 1 (FAL) 0, 1, 2, & 3 (GJL) 0&1 2–6 h Code 4932. SDR3d SDR4d SDR5d — — — — — — — — — — — — — SBR2d Table 16.150: Class 8739 UL Listed Short Circuit Ratings Standard enclosure includes: NEMAs 1, 4 & 4X stainless, and 12/3R. Table 16.149: Coil Voltage Codes 60 Hz 24gf 120g 208 240 480 600 Specify Type FAL SCW18d SCW13d e Without External Reset FAL 4463. NEMA Size 0-3 0-3 4-5 4-5 $ Price With External Reset 1 4292. 7-1/2 10 Bolted Type 0 SDW13d SDW14d SDW15d SEW16d SEW13d SEW11d SFW15d SFW13d SFW14d — — — — — — — SBW12d 460 (480) 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 5 Type ® $ Price SPIN TOP $ Price Type NEMA 12/3Rc Dusttight and Driptight Industrial Use Enclosure Ampere Rating 15 Type 7-1/2 10 $ Price NEMA 7 & 9b For Hazardous Locations Class I, Groups C & D Class II, Groups E, F & G Amps Interrupting Enclosure Capability Rating (AIC) 0 – 480 Standardh 100,000 0 – 480 Standardh 22,000 481 – 600 Standardh 10,000 481 – 600 Standardh 10,000 600 Standardh 22,000 Thermal Magnetic Circuit Breaker Type 0-3 600 Standardh 5,000 4&5 600 Standardh 10,000 6 600 Standardh 18,000 Standard enclosure includes: NEMAs 1, 4 & 4X stainless, and 12. Voltage For How to Order Information, see page 16-12. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Motor Voltage (Starter Voltage) NEMA 4 & 4X NEMA 4X Watertight Watertight and Dusttight Dusttight Enclosure and Corrosion Stainless Steel (304) Resistant (Sizes 0 - 5)a Polyester Enclosure f 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8739SBG2V01S). These voltage codes must include Form S (supplied at no charge) (i.e., order as 8739SDG3V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. 16 g © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-55 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Combination Starters—NEMA Rated Class 8738, 8739 / Refer to Catalog 8538CT9701 www.schneider-electric.us Approximate Dimensions Table 16.151: NEMA 1 Enclosure (Size 0–2) Figure 1 NEMA Size Class Type 0–1 8738 & 8739 2 8738 & 8739 SBG SCG SDG Dimensions (in inches)c—see Figure 1 A B 13-3/4 15 C 23 D 8-11/32 10-5/8 E F G H 21 18-29/32 1-7/8 1-7/8 28-3/4 9-19/32 11-5/8 26-1/4 21-15/32 2-3/16 I Top & Bottom J K L M N O 3-3/4 2-5/16 1-1/16 3-1/4 2-3/16 1-1/4 2 4 2-9/16 1-1/4 P 7/8 — 3-1/4 2-3/16 1-1/4 29/32 — L O P W Sides X 1/2–3/4–1 1/2–3/4–1 1–1-1/4 Wt. (lbs.) Y 1–1-1/4 1/2 49 1/2 80 Table 16.152: NEMA 1 Enclosure (Size 3–6) Figure 2 NEMA Size Class 3 Dimensions (in inches)c—see Figure 2 Type 8738 & 8739 SEG A B C 18-1/2 44 D E 10-19/32 12-1/2 51-1/2 10-17/32 15 F G H I J Top & Bottom K M N Sides W X Y Wt. (lbs.) 1–1-1/4 2–2-1/4 1/2–3/4 1/2 245 3 25-31/32 43-1/2 1/4 — 2-13/16 3-1/2 5 2-11/16 5-3/8 1-7/32 29/32 3 30-23/32 1/4 — 2-13/16 3-1/2 5 2-11/16 5-3/8 1-7/32 29/32 2-1/2 1/2–3/4 1/2 — 3 25-31/32 43-1/2 1/4 — 2-13/16 3-1/2 5 2-11/16 5-3/8 1-7/32 29/32 1–1-1/4 2–2-1/4 1/2–3/4 1/2 — 4 39-13/32 76 1/2 — 3-1/2 6-9/32 9-1/4 3-3/16 — 1/2–3/4 3 — — 8738 SFG 21 8739 SFG 18-1/2 44 51 8738 SGG 30 77 15-1/2 22 8739 SGG 30 65 13-23/32 22 4 39-13/32 64 1/2 — 3-1/2 6-9/32 5 3-3/16 — — — 1/2–3/4 3 — — 8738 & 8739 SHG 36 90 17-1/32 — — — — — — — — — — — — — — — — — 4 10-19/32 12-1/2 — — 5 6 Table 16.153: NEMA 12/3R Enclosure Figure 3 Dimensions (in inches)c—see Figure 3 NEMA Size Class Type 0–1 8738 & 8739 SBA SCA 2 8738 & 8739 SDA 15 3 8738 & 8739 SEA 18-1/2 I J Wt. (lbs.) 3-3/4 20-5/16 52 A B C D E F G H 13-3/4 10-3/32 24-3/4 3-1/4 2-1/2 8-3/4 24 3/8 10-31/32 31 3-1/4 3 9 30-1/4 3/8 3-3/4 23-7/16 95 10-19/32 45 5 3 12-1/2 44 1/2 3-3/4 25-19/32 255 — 8738 SFA 21 10-19/32 52-1/2 5 3 15 51-1/2 1/2 3-3/4 30-11/32 8739 SFA 18-1/2 10-19/32 45 3-1/4 3 12-1/2 44 1/2 3-3/4 25-19/32 — 8738 SGA 30 15-1/2 78 9-1/4 4 22 77 1/2 7-1/2 39-13/32 — 8739 SGA 30 15-1/2 66 — 4 22 65 1/2 7-1/2 37-7/8 — 8739 SHA 36 17-1/32 90 — — — — — — — — 4 5 6a a Size 6 enclosures are floor mounting. Table 16.154: NEMA 4X Polyester Enclosureb Figure 4 NEMA Size A Dimensions (in inches)c—see Figure 4 Class E Type A B C E F SBW 0-2 SCW 25.25 11.4 27.00 17.88 25.75 SDW SEW 3-4 8739 26.31 11.4 33.50 18.50 32.25 SFW b See page 16-57 for important information on hubs for NEMA 4X enclosures. c The dimensions shown in all tables above are also for Form F4T (standard control transformer), Form F4T11 (100 VA extra-capacity), and Form F4T12 (200 VA extra-capacity). 8738 & 8739 F C B Figure 4: NEMA 4X Polyester Enclosure NOTE: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. A Handle Swing L M D K A D C Handle Swing L E C H O A F N E H Y Handle Swing D B P 16 Y O G B NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS E B G C Y Y (4) .31 Dia. Mtg. Holes 8 (For Sizes 0, 1, and 2) Cover Open 90º F F K H I Figure 1: NEMA 1 Enclosure (Sizes 0–2) (4) .31 Dia. Mtg. Holes 8 (For Sizes 0, 1, and 2) (4) .44 Dia. Mtg. Holes 11 (For Sizes 3 and 4) (4) .56 Dia. Mtg. Holes Located on 14 External Flanges (For Size 5) J G J Cover Open 90º J W X W W X W 16-56 (4) .44 Dia. Mtg. Holes 11 (For Sizes 3 and 4) (4) .56 Dia. Mtg. Holes Located on 14 External Flanges (For Size 5) Cover Open 90º M N Figure 2: NEMA 1 Enclosure (Sizes 3–6) I Figure 3: NEMA 12 Enclosure © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Combination Starters Class 8738, 8739 / Refer to Catalog 8538CT9701 www.schneider-electric.us Approximate Dimensions Table 16.155: NEMA 4 & 4X Stainless Enclosure Figure 1 Dimensions (in inches)a—see Figure 1 NEMA Size Class 0–1 8738 & 8739 SBW SCW 13-3/4 2 8738 & 8739 SDW 15 3 8738 & 8739 SEW 18-1/2 8738 SFW 21 8739 SFW 18-1/2 10-9/16 Type A B C D E F 8-11/32 25-3/16 9-19/32 30-1/32 3-1/4 2-1/2 3-1/4 2-1/2 10-9/16 10-17/32 45-3/16 5 3 52-11/16 5 3 45-3/16 5 3 Bottom Top & Bot. W X 1 Hub Wt. (lbs.) G H I J K L 8-3/4 24 19/32 3 1-5/8 2-5/16 18-17/32 3/4 Hub 10 29-3/4 5/8 3 2 2-5/8 21-1/32 3/4 Hub 1-1/2 Hub 95 12-1/2 44 19/32 3-1/2 2-5/8 3-3/16 25-1/2 3/4 Hub 2-1/2 Hub 255 15 51-1/2 19/32 3-1/2 2-5/8 3-3/16 30-1/4 3/4 Hub 2-1/2 Hub — 12-1/2 44 19/32 3-1/2 2-5/8 3-3/16 25-1/2 3/4 Hub 2-1/2 Hub — 52 4 8738 SGW 30 15-1/2 78-3/32 9-1/4 4 22 77 9/16 6-3/32 3 3-1/2 39-13/32 3/4 Hub 3-1/2 Hub — 8739 SGW 30 13-57/64 66-3/32 5 4 22 65 9/16 6-3/32 3 3-1/2 37-7/8 3/4 Hub 3-1/2 Hub — 8739 SHW 36 17-1/32 98 — — — — — — — — — 5 6 a — — — Above dimensions also for Form F4T (standard control transformer), Form F4T11 (100 VA extra capacity) and Form F4T12 (200 VA extra capacity). Table 16.156: Class 8739—NEMA 7 & 9 Bolted Enclosure Figure 2 Note: Enclosure has 3 door mounted Closing Plates. NEMA Size Type 0–1 SBT SCT 2 SDT Dimensions (in inches)—see Figure 2 G K L N P Q, R S, T, U, V Wt. (lbs.) H J Z 14-1/4 27-5/8 9-1/2 12-1/4 19-1/4 9-5/8 11 2-3/8 3-1/8 1-1/2 115 18-1/8 31-5/8 10 16-1/4 19-1/4 9-5/8 12-5/8 2-3/8 3-3/4 2-1/2 180 Table 16.157: Class 8739—NEMA 7 & 9 SPIN TOP® Enclosure Figure 3 NEMA Size Type Conduit Sizes Loc. A, B, C and D Dimensions (in inches)—see Figure 3 0–1 SBR SCR 1-1/2 13-7/8 45-1/4 19-1/4 8 4-3/4 2 SDR 2 13-3/8 52-1/2 20-1/4 8 4-3/4 E F G H J K L M N P 5-1/4 1-1/2 1-1/16 7 7-1/2 2-1/2 — 7-3/4 Wt. (lbs.) Q R 18 9-3/8 2-3/4 120 23 8-5/8 3 130 NOTE: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. Information on Hubs Hubs are supplied with each NEMA 4X combination starter as shown in the table below. Note that hubs are only installed in stainless steel enclosures; they are not installed in polyester enclosures. Table 16.158: 0&1 2 3&4 Quantity 1 2 1 2 1 2 Hub Size 0.75" 1.00" 0.75" 1.50" 0.75" 2.50" V U L Top View Rear View Space Required to Remove Top Cover H A F H E Handle Swing D B N N E Q J T S P G (4) Mtg. for Bolts (4) .31 Dia. Mtg. Holes (for Size 0, 1, & 2) 8 Cover Open 90º (4) .44 Dia. Mtg. Holes (for Size 3 & 4) 11 (4) .56 Dia. Mtg. Holes Located on 14 External Flanges (for Size 5) W X L J I K A Threaded Cover Enclosure G C F L Overload Reset D B J T Q .19 5 R (2) "Z" Pipe Tap Top and Bottom K 1/2" NPT for Breather and Drain Figure 2: NEMA 7 & 9 Bolted Enclosure H S K Circuit Breaker Operator Handle - Combination Form Only (Add 1 IN to overall width) M Mtg. Holes and/or Slots (3) P Space Required to Remove Bottom Cover Figure 3: NEMA 7 & 9 SPIN TOP Enclosure 16 Figure 1: NEMA 4 & 4X Stainless Enclosure Rear Seal R G C NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS NEMA Size © 2009 Schneider Electric All Rights Reserved 16-57 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Multispeed Magnetic Starters Class 8810 / Refer to Catalog 8502CT9701 www.schneider-electric.us Application Data Both consequent pole and separate winding motors are available in three types: 1) Constant horsepower, 2) Constant torque, and 3) Variable torque. Typical applications for these different types of motors are shown below. Note: For detailed information involving the technical aspects of flexibility of the starters used in the multispeed controllers, see Classes 8702, 8736 and 8810 application data. Multispeed motors are available in two basic versions: 1) Consequent pole, and 2) separate winding. A separate winding motor has a winding for each speed while a consequent pole motor has a winding for every two speeds (three speed motors have two windings). The motor connections (and thus the types of controllers) for two speed starters are exemplified by the schematic diagrams shown below. Note that consequent pole two speed controllers involve a 5-pole and a 3-pole starter while separate winding controllers have two 3-pole starters. The type of motor must be verified prior to ordering. Field modification of starters to match the motor may not be possible. Separate winding motors are usually chosen when flexibility is important, since the speeds of a consequent pole motor are usually limited to a 2/1 ratio; a broad range of speeds can be obtained on a separate winding motor. Table 16.159: Typical Applications Constant Hp Constant Torque A. Spindles B. Cutting Tools 1. Lathes 2. Saws Variable Torque A. Conveyors B. Mills C. Dough Mixers D. Reciprocating Pumps A. Fans B. Centrifugal Pumps Table 16.160: Typical Schematic Diagrams HIGH 4 1 STOP LOW 2 L 5 H OL OL HIGH 4 1 STOP LOW L 5 H L HIGH 3 L HIGH 3 L H 2 OL OL HIGH 4 1 STOP L H L HIGH L 3 H 5 OLOL L H 2 H H LOW H L1 L1 L1 L2 L3 L2 L3 L L L OL OL OL H H OL OL L L H L OL OL H OL OL H L2 L3 H L OL OL OL L T1 T1 T2 T3 T6 T4 T1 T5 T2 T3 T6 T4 T5 T2 T3 H H H OL OL OL T11 T12 T13 2-Speed Separate Winding Constant Hp, Constant Torque and Variable Torque NEMA Size 0-4 Sizes 5, 6 & 7 Use Special Circuitry 2-Speed Consequent Pole Constant or Variable Torque NEMA Size 0-4 Sizes 5, 6 & 7 Use Special Circuitry 2-Speed Consequent Pole Constant Horsepower NEMA Size 0-4 Sizes 5, 6 & 7 Use Special Circuitry L OL OL OL H H L L Additional Features—Special Relays for Non-Reversing and Reversing Multispeed Starters Form R3 Decelerating Relay/Timer. This is similar in action to Form R2 accelerating relays, except that they function to prevent immediate transfer from a higher to a lower speed. A definite time interval, preset on the timer, must elapse between each speed change. Form R10 Antiplugging Relays/Timers. This form imposes a time delay when transferring from the forward to the reverse direction or reverse to forward, for reversing multispeed starters. This provides up to a 60 second delay in the transfer of the direction of the motor, and can help prevent damage which could result from plugging. Overload Relay Modification. Form Y81 (Low Speed)— For NEMA size 3 and 4, when the low speed full load current does not appear on the appropriate thermal unit selection tables, include Form Y81 (Low Speed) (No Charge for this form). This form modifies the overload relay block to accept Type B thermal units. Consult your nearest Square D/Schneider Electric sales office for assistance on thermal unit selection. General. Some applications require special relays to control the speed change and/or starting of the motor. The descriptions below cover the four common relay schemes for these applications. Form R1 Compelling Relay. This relay requires the motor to be started at low speed before any higher speed can be selected. This arrangement ensures that the motor will always start the load at low speed. The stop button must be pressed before it is possible to change from a higher to a lower speed. (Not available with Form R2.) Form R2 Accelerating Relay/Timer. With Form R2 accelerating relays, the ultimate speed is determined by the button which is pressed, but the starter will start the motor at low speed and automatically accelerate it through successive steps until the selected speed is reached. Definite time intervals must elapse between each speed change. Individual adjustable timing relays are provided for each interval. The stop button must be pressed before it is possible to change from a higher to a lower speed. (Not available with Form R1.) Table 16.161: Special Pilot Lighting 16 HIGH 4 LOW 5 H 1 STOP L OL OL 1 STOP HIGH 4 2 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS L HIGH 3 L H H 2 5 H L L OL OL 1 STOP HIGH 3 L L H HIGH 4 LOW 5 H L H 2 H ON H 16-58 LOW L L OFF To Power Circuit To Power Circuit One pilot light “ON” One pilot light “OFF” HIGH 3 L L OL OL 1 STOP HIGH 4 5 H 2 L HIGH 3 L H H Two pilot lights “L” and “H'” L OL OL 1 STOP HIGH 4 H ON 2 LOW 5 H L L H HIGH 3 L H OL OL H H To Power Circuit L L H H LOW OFF To Power Circuit Two pilot lights “ON” and “OFF” OFF To Power Circuit Three pilot lights “L”, “H”, and “OFF” © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Multispeed Magnetic Starters Class 8810 / Refer to Catalog 8502CT9701 www.schneider-electric.us Multispeed motors are available in two basic versions: 1) Consequent pole, and 2) separate winding. A separate winding motor has a winding for each speed while a consequent pole motor has a winding for every two speeds (three speed motors have two windings). 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 6 thermal units (Sizes 0–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.162: Class 8810—Non-Combination Type Maximum Polyphase Horsepower Ratings Type of Motor Constant Horsepower Motors NEMA Size 200 V Constant Hp 0 1 2 3 4 5 6 Constant Torque or Variable Torque 0 1 2 3 4 5 6 Constant Hp b Constant Torque or Variable Torque b 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 2 5 7-1/2 20 30 60 100 — — — — — — — 2 5 7-1/2 20 30 60 100 — — — — — — — — — 230 V 2 5 10 25 40 75 150 — — — — — — — 2 5 10 25 40 75 150 225 — — — — — — — — Constant Torque or Variable Torque Motors 460– 575 V 3 7-1/2 20 40 75 150 300 — — — — — — — 3 7-1/2 20 40 75 150 300 450 — — — — — — — — NEMA 4 & 4X Watertight and Dusttight Enclosure (Stainless Steel) (304) (Sizes 0—5) Sheet Steel (Size 6) NEMA 1 General Purpose Enclosure 200 V 230 V 460– 575 V Type $ Price Type — — — — — — — — — — — — — — — — — — — — — SBG1c SCG1c SDG1c SEG1c SFG1c SGG1c SHG1c SBG2c SCG2c SDG2c SEG2c SFG2c SGG2c SHG2c 2199. 2370. 4307. 6501. 17352. 34286. 77286. 2199. 2370. 4307. 6501. 17352. 34286. 77286. SBW1c SCW1c SDW1c SEW1c SFW1c SGW1c SHW1c SBW2c SCW2c SDW2c SEW2c SFW2c SGW2c SHW2c SBG3c SCG3c SDG3c SEG3c SFG3c SGG3c SHG3c SJG3c SBG4c SCG4c SDG4c SEG4c SFG4c SGG4c SHG4c SJG4c 1571. 1772. 3167. 4962. 12168. 28718. 58755. 76032. 1571. 1772. 3167. 4962. 12168. 28718. 58755. 76032. SBW3c SCW3c SDW3c SEW3c SFW3c SGW3c SHW3c — SBW4c SCW4c SDW4c SEW4c SFW4c SGW4c SHW4c — 3 7-1/2 10 25 40 75 150 — — — — — — — — 3 7-1/2 10 25 40 75 150 — 3 7-1/2 15 30 50 100 200 — — — — — — — — 3 7-1/2 15 30 50 100 200 300 5 10 25 50 100 200 400 — — — — — — — — 5 10 25 50 100 200 400 600 $ Price NEMA 4Xd Watertight, Dusttight and Corrosion Resistant Enclosure Type $ Price NEMA 7 and 9 For Hazardous Locations Class I Groups C & D Class II Groups E, F & G Type $ Price NEMA 12/3Rf Dusttight and Driptight Industrial Use Enclosure Type Single Winding (Consequent Pole) 5-Pole–3-Pole 3567. SBW51c 4100. — — SBA1c 3708. SCW51c 4278. SCR1c 5895. SCA1c 5958. SDW51c 6557. SDR1c 10947. SDA1c 8837. — — SER1c 17553. SEA1c 22365. — — — — SFA1c 46008. — — — — SGA1c 93308. — — — — SHA1c 3567. SBW52c 4100. — — SBA2c 3708. SCW52c 4278. SCR2c 5895. SCA2c 5958. SDW52c 6557. SDR2c 10947. SDA2c 8837. — — SER2c 17553. SEA2c 22365. — — — — SFA2c 46008. — — — — SGA2c 93308. — — — — SHA2c Two Winding (Separate Winding) 3-Pole–3-Poleb 2939. SBW53c 3384. — — SBA3c 3110. SCW53c 3567. SCR3c 4968. SCA3c 3231. SDW53c 3564. SDR3c 5264. SDA3c 7412. — — SER3c 12018. SEA3c 17181. — — — — SFA3c 40440. — — — — SGA3c 66090. — — — — SHA3c — — — — — SJA3c 2939. SBW54c 3384. — — SBA4c 3110. SCW54c 3567. SCR4c 4968. SCA4c 3231. SDW54c 3564. SDR4c 5264. SDA4c 7412. — — SER4c 12018. SEA4c 17181. — — — — SFA4c 40440. — — — — SGA4c 66090. — — — — SHA4c — — — — — SJA4c Open Type $ Price Type $ Price 2640. 2811. 4932. 7925. 20172. 46008. 83753. 2640. 2811. 4932. 7925. 20172. 46008. 83753. SBO1c SCO1c SDO1c SEO1c SFO1c SGO1c SHO1c SBO2c SCO2c SDO2c SEO2c SFO2c SGO2c SHO2c 2142. 2285. 4050. 6101. 15786. 31197. 70799. 2142. 2285. 4050. 6101. 15786. 31197. 70799. 2015. 2213. 2529. 6386. 14988. 40440. 65195. 82826. 2015. 2213. 2529. 6386. 14988. 40440. 65195. 82826. SBO3c SCO3c SDO3c SEO3c SFO3c SGO3c SHO3c SJ03c SBO4c SCO4c SDO4c SEO4c SFO4c SGO4c SHO4c SJO4c 1515. 1686. 1956. 4590. 11429. 26994. 51848. 69195. 1515. 1686. 1956. 4590. 11429. 26994. 51848. 69195. Table 16.163: Class 8810—Combination Circuit Breaker Type (Thermal Magnetic Breakers)ae Single Winding (Consequent Pole) 5-Pole–3-Pole 6429. CBW51c 6962. — — CBA1c 4676. — — 6566. CCW51c 7140. CCR1c 8757. CCA1c 4867. — — Constant 10089. CDW51c 10089. CDR1c 14705. CDA1c 7497. — — Hp 13836. — — CER1c 22437. CEA1c 10787. — — 29460. — — — — CFA1c 26753. — — 57816. — — — — CGA1c 56847. — — 68843. — — — — CHA1c 65841. — — 0 — — — 3 3 5 6429. CBW52c 6962. — — CBA2c 4676. — — Constant 1 — — — 7-1/2 7-1/2 10 6566. CCW52c 7140. CCR2c 8757. CCA2c 4867. — — Torque 2 — — — 10 15 25 10089. CDW52c 10089. CDR2c 14705. CDA2c 7497. — — or 3 — — — 25 30 50 13836. — — CER2c 22437. CEA2c 10787. — — Variable 4 — — — 40 50 100 29460. — — — — CFA2c 26753. — — Torque 5 — — — 75 100 200 57816. — — — — CGA2c 56847. — — 6 — — — 150 200 400 68843. — — — — CHA2c 65841. — — Two Winding (Separate Winding) 3-Pole–3-Poleb 0 2 2 3 — — — 4050. CBG3c 3581. CBW3c 5801. CBW53c 6251. — — CBA3c — — 1 5 5 7-1/2 — — — 4248. CCG3c 3780. CCW3c 5972. CCW53c 6429. CCR3c 7830. CCA3c — — Constant 2 7-1/2 10 20 — — — 6357. CDG3c 5616. CDW3c 8379. CDW53c 8879. CDR3c 11429. CDA3c — — Hp 3 20 25 40 — — — 9248. CEG3c 7626. CEW3c 12297. — — CER3c 16905. CEA3c — — b 4 30 40 75 — — — CFG3c 17040. CFW3c 16182. — — — — CFA3c 14379. — — 5 60 75 150 — — — CGG3c 38190. CGW3c 52248. — — — — CGA3c 51278. — — 6 100 150 300 — — — CHG3c 72629. CHW3c 84306. — — — — CHA3c 80199. — — 7 — 225 450 — — — CJG3c 95358. — — — — — — CJA3c 103217. 0 — — — 3 3 5 CBG4c 3581. CBW4c 5801. CBW54c 6251. — — CBA4c 4050. — — Constant 1 — — — 7-1/2 7-1/2 10 CCG4c 3780. CCW4c 5972. CCW54c 6429. CCR4c 7830. CCA4c 4248. — — Torque 2 — — — 10 15 25 CDG4c 5616. CDW4c 8379. CDW54c 8879. CDR4c 11429. CDA4c 6357. — — or 3 — — — 25 30 50 CEG4c 7626. CEW4c 12297. — — CER4c 16905. CEA4c 9248. — — Variable 4 — — — 40 50 100 CFG4c 17040. CFW4c 16182. — — — — CFA4c 14379. — — Torque 5 — — — 75 100 200 CGG4c 38190. CGW4c 52248. — — — — CGA4c 51278. — — b 6 — — — 150 200 400 CHG4c 72629. CHW4c 84306. — — — — CHA4c 80199. — — 7 — — — — 300 600 CJG4c 95358. — — — — — — CJA4c 103217. a The NEC 1300% maximum setting for instantaneous trip circuit breakers may be inadequate for multispeed motors. b Prices and type numbers shown for three phase, separate-winding motor starters apply only when motor windings are Wye connected. When motor windings are connected open delta, use the prices shown for three phase consequent pole motor starters. c Voltage code must be specified to order this product. Refer to standard voltage codes shown on page 16-60. d NEMA 4X hubs are included with each starter at no additional cost. e Not available in Mag-Gard versions. f NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service entrance rated applications. See page 16-104 for more information. 2 5 7-1/2 20 30 60 100 2 5 10 25 40 75 150 3 7-1/2 20 40 75 150 300 — — — — — — — — — — — — — — — — — — — — — CBG1c CCG1c CDG1c CEG1c CFG1c CGG1c CHG1c CBG2c CCG2c CDG2c CEG2c CFG2c CGG2c CHG2c 4206. 4377. 6758. 9162. 22224. 43758. 91229. 4206. 4377. 6758. 9162. 22224. 43758. 91229. CBW1c CCW1c CDW1c CEW1c CFW1c CGW1c CHW1c CBW2c CCW2c CDW2c CEW2c CFW2c CGW2c CHW2c 16 For How to Order Information, see page 16-12. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 0 1 2 3 4 5 6 © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-59 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Two Speed Combination Starters Class 8810 / Refer to Catalog 8502CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 6 thermal units (Sizes 0–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.164: Class 8810—Combination Disconnect Switch Type (Class H Fuse Clips) Maximum Polyphase Horsepower Ratings Type of Motor Constant Horsepower Motors NEMA Size 200 V 230 V Constant Torque or Variable Torque Motors 460— 575 V 200 V 230 V 460— 575 V Type None 30c None 30c None 60 None 100 None 200 None 400 None 600 None 30c None 30c None 60 None 100 None 200 None 400 None 600 UBG1b DBG1b UCG1b DCG1b UDG1b DDG1b UEG1b DEG1b UFG1b DFG1b UGG1b DGG1b UHG1b DHG1b UBG2b DBG2b UCG2b DCG2b UDG2b DDG2b UEG2b DEG2b UFG2b DFG2b UGG2b DGG2b UHG2b DHG2b None 30c None 1 5 5 7-1/2 — — — 30c None 2 7-1/2 10 20 — — — Constant 60 Horsepower None 3 20 25 40 — — — a 100 None 4 30 40 75 — — — 200 None 5 60 75 150 — — — 400 None 6 100 150 300 — — — 600 None 0 — — — 3 3 5 30c None 1 — — — 7-1/2 7-1/2 10 30c None Constant 2 — — — 10 15 25 60 Torque or None 3 — — — 25 30 50 Variable 100 Torque None 4 — — — 40 50 100 a 200 None 5 — — — 75 100 200 400 None 6 — — — 150 200 400 600 a Prices and type numbers shown for three phase, separate-winding motor starters apply only when motor windings are Wye connected. When motor windings are connected open delta use the prices shown for three phase consequent pole motor starters. b Voltage code must be specified to order this product. Refer to standard voltage codes shown below. c When separate control is specified, use V8x (see page 16-110) voltage codes to specify motor and control voltages. d NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service entrance rated applications. See page 16-104 for more information. UBG3b DBG3b UCG3b DCG3b UDG3b DDG3b UEG3b DEG3b UFG3b DFG3b UGG3b DGG3b UHG3b DHG3b UBG4b DBG4b UCG4b DCG4b UDG4b DDG4b UEG4b DEG4b UFG4b DFG4b UGG4b DGG4b UHG4b DHG4b Constant Horsepower Constant Torque or Variable Torque 0 2 2 1 5 5 3 7-1/2 — — — — — — 2 7-1/2 10 20 — — — 3 20 25 40 — — — 4 30 40 75 — — — 5 60 75 150 — — — 6 100 150 300 — — — 0 — — — 3 3 5 1 — — — 7-1/2 7-1/2 10 2 — — — 10 15 25 3 — — — 25 30 50 4 — — — 40 50 100 5 — — — 75 100 200 6 — — — 150 200 400 0 2 2 3 — — — 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-62 Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998). . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999) . . . . . . . . . . . . . . . . . . . . . . . . page 16-117 For How to Order Information, see page 16-12. 16-60 CP1 NEMA 4 & 4X Watertight and Dusttight Enclosure Stainless Steel (304) (Sizes 0—5) Sheet Steel (Size 6 not 4X) NEMA 1 General Purpose Enclosure Fuse Clip Size Amps $ Price Type $ Price NEMA 12/3Rd Dusttight and Driptight Industrial Use Enclosure Type Single Winding (Consequent Pole) 5-Pole–3-Pole 3537.00 UBW1b 5759.00 UBA1b 3765.00 DBW1b 5988.00 DBA1b 3708.00 UCW1b 5903.00 UCA1b 3936.00 DCW1b 6129.00 DCA1b 6015.00 UDW1b 8751.00 UDA1b 6129.00 DDW1b 8864.00 DDA1b 8666.00 UEW1b 13337.00 UEA1b 8837.00 DEW1b 13508.00 DEA1b 19517.00 UFW1b 27693.00 UFA1b 20970.00 DFW1b 25964.00 DFA1b 39644.00 UGW1b 35799.00 UGA1b 40154.00 DGW1b 54212.00 DGA1b 87789.00 UHW1b 99824.00 UHA1b 91085.00 DHW1b 103121.00 DHA1b 3537.00 UBW2b 5759.00 UBA2b 3765.00 DBW2b 5988.00 DBA2b 3708.00 UCW2b 5903.00 UCA2b 3936.00 DCW2b 6129.00 DCA2b 6015.00 UDW2b 8751.00 UDA2b 6129.00 DDW2b 8864.00 DDA2b 8666.00 UEW2b 13337.00 UEA2b 8837.00 DEW2b 13508.00 DEA2b 19517.00 UFW2b 27693.00 UFA2b 20970.00 DFW2b 25964.00 DFA2b 39644.00 UGW2b 35799.00 UGA2b 40154.00 DGW2b 54212.00 DGA2b 87789.00 UHW2b 99824.00 UHA2b 91085.00 DHW2b 103121.00 DHA2b Two Winding (Separate Winding) 3-Pole–3-Pole 2910.00 UBW3b 5133.00 UBA3b 3140.00 DBW3b 5360.00 DBA3b 3110.00 UCW3b 5304.00 UCA3b 3338.00 DCW3b 5531.00 DCA3b 4877.00 UDW3b 7640.00 UDA3b 4991.00 DDW3b 7754.00 DDA3b 7127.00 UEW3b 11798.00 UEA3b 7866.00 DEW3b 11969.00 DEA3b 15159.00 UFW3b 22509.00 UFA3b 17324.00 DFW3b 23021.00 DFA3b 34073.00 UGW3b 48131.00 UGA3b 34586.00 DGW3b 48644.00 DGA3b 69188.00 UHW3b 80868.00 UHA3b 72485.00 DHW3b 84164.00 DHA3b 2910.00 UBW4b 5133.00 UBA4b 3140.00 DBW4b 5360.00 DBA4b 3110.00 UCW4b 5304.00 UCA4b 3338.00 DCW4b 5531.00 DCA4b 4877.00 UDW4b 7640.00 UDA4b 4991.00 DDW4b 7754.00 DDA4b 7127.00 UEW4b 11798.00 UEA4b 7866.00 DEW4b 11969.00 DEA4b 15159.00 UFW4b 22509.00 UFA4b 17324.00 DFW4b 23021.00 DFA4b 34073.00 UGW4b 48131.00 UGA4b 34586.00 DGW4b 48644.00 DGA4b 69188.00 UHW4b 80868.00 UHA4b 72485.00 DHW4b 84164.00 DHA4b $ Price 4008.00 4235.00 4179.00 4406.00 6758.00 6870.00 10287.00 10458.00 24987.00 22500.00 34622.00 52446.00 95324.00 98621.00 4008.00 4235.00 4179.00 4406.00 6758.00 6870.00 10287.00 10458.00 24987.00 22500.00 34622.00 52446.00 95324.00 98621.00 3380.00 3609.00 3581.00 3807.00 5616.00 5732.00 8751.00 9491.00 19803.00 21852.00 50439.00 50952.00 76766.00 80063.00 3380.00 3609.00 3581.00 3807.00 5616.00 5732.00 8751.00 9491.00 19803.00 21852.00 50439.00 50952.00 76766.00 80063.00 Table 16.165: Coil Voltage Codes Voltage Code $ Price Adder 60 Hz 50 Hz 24fe — V01 No Charge 120f 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge — 380 V05 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 e 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8810UBG1V01S). f These voltage codes must include Form S (supplied at no charge) (i.e., order as 8810UCG1V02S). Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Reversing Two-Speed Magnetic Starters Class 8810 / Refer to Catalog 8502CT9701 www.schneider-electric.us 3-Pole Polyphase—600 Vac Maximum—50-60 Hz Note that the prices shown do not include thermal units. Devices require 6 thermal units (Sizes 0–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.166: Class 8810—Reversing Maximum Polyphase Ratings Type of Motor Single Winding Constant Horsepower Single Winding Constant Torque or Variable Torque Two Winding Constanta Horsepower Two Winding Constanta Torque or Variable Torque Constant Horsepower Motors NEMA Size 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 200 V 230 V 2 5 7-1/2 20 30 60 — — — — — — 2 5 7-1/2 20 30 60 — — — — — — 2 5 10 25 40 75 — — — — — — 2 5 10 25 40 75 — — — — — — Reversing In One Speed Only (Specify High or Low)b NEMA Type 1 General Purpose Enclosure Constant Torque or Variable Torque Motors 460– 575 V 3 7-1/2 20 40 75 150 — — — — — — 3 7-1/2 20 40 75 150 — — — — — — 200 V 230 V — — — — — — 3 7-1/2 10 25 40 75 — — — — — — 3 7-1/2 10 25 40 75 — — — — — — 3 7-1/2 15 30 50 100 — — — — — — 3 7-1/2 15 30 50 100 460– 575 V — — — — — — 5 10 25 50 100 200 — — — — — — 5 10 25 50 100 200 NEMA 12 Dusttight and Driptight Industrial Use Enclosure Open Type Reversing In Both Speeds NEMA Type 1 General Purpose Enclosure NEMA 12/3Rf Dusttight and Driptight Industrial Use Enclosure Open Type Type $ Price Type $ Price Type $ Price Type $ Price Type $ Price Type $ Price SBG21c SCG21c SDG21c SEG21c SFG21c SGG21c SBG22c SCG22c SDG22c SEG22c SFG22c SGG22c SBG23c SCG23c SDG23c SEG23c SFG23c SGG23c SBG24c SCG24c SDG24c SEG24c SFG24c SGG24c 3936. 4248. 6984. 10260. 20457. 46449. 3936. 4248. 6984. 10260. 20457. 46449. 3252. 3452. 5817. 9005. 15929. 37335. 3252. 3452. 5817. 9005. 15929. 37335. SBA21c SCA21c SDA21c SEA21c SFA21c SGA21c SBA22c SCA22c SDA22c SEA22c SFA22c SGA22c SBA23c SCA23c SDA23c SEA23c SFA23c SGA23c SBA24c SCA24c SDA24c SEA24c SFA24c SGA24c 5261. 5574. 8522. 13892. 28290. 58172. 5261. 5574. 8522. 13892. 28290. 58172. 4577. 4778. 7353. 12639. 22338. 49058. 4577. 4778. 7353. 12639. 22338. 49058. SBO21c SCO21c SDO21c SEO21c SFO21c SGO21c SBO22c SCO22c SDO22c SEO22c SFO22c SGO22c SBO23c SCO23c SDO23c SEO23c SFO23c SGO23c SBO24c SCO24c SDO24c SEO24c SFO24c SGO24c 3851. 4121. 6501. 9662. 19718. 42164. 3851. 4121. 6501. 9662. 19718. 42164. 3167. 3324. 5432. 8267. 15188. 33048. 3167. 3324. 5432. 8267. 15188. 33048. SBG31c SCG31c SDG31c SEG31c SFG31c SGG31c SBG32c SCG32c SDG32c SEG32c SFG32c SGG32c SBG33c SCG33c SDG33c SEG33c SFG33c SGG33c SBG34c SCG34c SDG34c SEG34c SFG34c SGG34c 4563. 4926. 8522. 13508. 26810. 56946. 4563. 4926. 8522. 13508. 26810. 56946. 4193. 4620. 8067. 12027. 21284. 49455. 4193. 4620. 8067. 12027. 21284. 49455. SBA31c SCA31c SDA31c SEA31c SFA31c SGA31c SBA32c SCA32c SDA32c SEA32c SFA32c SGA32c SBA33c SCA33c SDA33c SEA33c SFA33c SGA33c SBA34c SCA34c SDA34c SEA34c SFA34c SGA34c 6330. 6728. 10517. 17139. 33390. 68679. 6330. 6728. 10517. 17139. 33390. 68679. 5958. 6386. 10061. 15885. 27693. 59396. 5958. 6386. 10061. 15885. 27693. 59396. SBO31c SCO31c SDO31c SEO31c SFO31c SGO31c SBO32c SCO32c SDO32c SEO32c SFO32c SGO32c SBO33c SCO33c SDO33c SEO33c SFO33c SGO33c SBO34c SCO34c SDO34c SEO34c SFO34c SGO34c 4449. 4791. 8010. 11997. 24930. 52659. 4449. 4791. 8010. 11997. 24930. 52659. 4077. 4449. 7554. 11228. 20487. 43388. 4077. 4449. 7554. 11228. 20487. 43388. 3-Pole Polyphase—600 Vac Maximum—50–60 Hz Note that the prices shown do not include thermal units. Devices require 6 thermal units (Sizes 0–6). Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Table 16.167: Class 8810—Non-Reversing, Vertically Arranged, Open Type, Two-Speed Starters Type of Motor NEMA Size Maximum Hp Ratings 200 V 230 V 380 V For Consequent Pole Motors 460-575 V Type For Separate Winding Motors $ Price Type $ Price 0 2 2 3 3 SBO11c 2142.00 SBO13c 1515.00 1 5 5 7-1/2 7-1/2 SCO11c 2282.00 SCO13c 1686.00 Constant 2 7-1/2 10 20 20 SDO11c 4050.00 SDO13c 2939.00 Horsepower 3 20 25 40 40 SEO11c 6101.00 SEO13c 4563.00 4 30 40 60 75 SFO11c 15786.00 SFO13c 11429.00 Constant 0 3 3 5 5 SBO12c 2142.00 SBO14c 1515.00 Torque 1 7-1/2 7-1/2 10 10 SCO12c 2282.00 SCO14c 1686.00 or 2 10 15 25 25 SDO12c 4050.00 SDO14c 2939.00 Variable 3 25 30 50 50 SEO12c 6101.00 SEO14c 4563.00 Torque 4 40 50 75 100 SFO12c 15786.00 SFO14c 11429.00 a Prices and type numbers shown for three phase, separate winding motor starters apply only when motor windings are Wye connected. When motor windings are connected open delta use the prices shown for consequent pole motor starters. b Specify the speed which requires reversing by adding an L (low) or an H (high) after the type number, e.g., a Class 8810 Type SBG21 with reversing in low only would be ordered as a Class 8810 Type SBG21L. c Voltage codes must be specified to order this product. Refer to standard voltage codes listed below. Table 16.168: Coil Voltage Codes Voltage 60 Hz 24ed 120e 208 240 — 480 600 Specify 50 Hz — 110 — 220 380 440 550 Specify Code $ Price Adder V01 V02 V08 V03 V05 V06 V07 V99 No Charge No Charge No Charge No Charge No Charge No Charge No Charge 35.60 d NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 24 V coils are not available on Sizes 4–7. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified (i.e., order as 8810SCG21V01S). e These voltage codes must include Form S (supplied at no charge) (i.e., order as 8810SDG21V02S). f NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service entrance rated applications. See page 16-104 for more information. Note: For voltage codes used with control transformers, see page 16-110. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is supplied at no charge. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-62 Factory Modifications (Forms). . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-109 Replacement Parts (Class 9998) . . . . . . . . . . . . . . . . . . . . . . . . page 16-114 Type S Accessories (Class 9999). . . . . . . . . . . . . . . . . . . . . . . . page 16-117 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-61 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Two-Speed Magnetic Starters Class 8810 / Refer to Catalog 8502CT9701 www.schneider-electric.us A D Table 16.169: NEMA 1 Enclosure (see Figure 1) Type A B C D E F G H SBG and SCG 11-7/8 11-7/8 SDG 14-7/8 14-1/8 7-17/32 9-3/4 1-1/16 1-1/16 9-3/4 5/16 7-21/32 12-3/4 1-1/16 1-1/16 12 SEG3 & 4 and SFG3 & 4 18-5/32 29-5/32 5/16 9-15/64 15-1/2 1-11/32 1-11/32 26-1/2 7/16 22-5/32 39-5/32 10-15/64 19-1/2 1-11/32 1-11/32 36-1/2 7/16 SGG1, 2, 3, 4 20-7/32 65-3/4 16-29/64 31 2-1/8 2-1/8 42 9/16 SHG1, 2, 3, 4 36-7/32 62-7/32 19-15/32 SJG3 & 4 RESET J Floor Mount Figure 1: NEMA 1, 4, and 12 Enclosures Table 16.170: NEMA 4 Enclosure (see Figure 1) Type A B 12-5/8 14-11/16 SDW 14-7/8 C D 7-13/16 4-1/4 15-3/4 E F 4-3/16 19/32 5-5/16 G H I J 13-1/2 5/16 1-21/32 2-5/16 8-1/4 4-1/4 15 5/16 2-1/32 2-5/8 SEW3 & 4 and SFW3 & 4 18-5/32 32-7/32 8-19/64 12 3-5/64 55/64 30-1/2 7/16 2-37/64 3-3/16 SEW1 & 2 and SFW1 & 2 22-5/32 42-7/32 9-49/64 16 3-5/64 55/64 40-1/2 7/16 2-21/64 2-57/64 SGW1, 2, 3, 4 12-1/8 27 4-3/32 39/64 48 9/16 2-63/64 3-1/2 35-7/32 49-7/32 I F (4) H Dia. Mtg. Holes Consult Square D SBW and SCW C GB RESET SEG1 & 2 and SFG1 & 2 E 3/8 A Type A B C E F G 11-7/8 13-1/2 7-3/4 4-1/4 3-13/16 3/8 12-3/4 5/16 14-7/8 15-3/4 7-7/8 4-1/4 5-5/16 3/8 15 5/16 SEA3 & 4 and SFA3 & 4 18-5/32 31-1/2 9-19/32 16 3-3/32 1/2 30-1/2 7/16 SEA1 & 2 and SFA1 & 2 22-5/3 41-1/2 10-19/32 16 3-3/32 1/2 40-1/2 7/16 SGA1, 2, 3, 4 35-7/32 49 13-7/64 27 4-7/64 1/2 48 9/16 SHA1, 2, 3, 4 36-7/32 62-7/32 19-15/32 I H RESET RESET Consult Square D 0 and 1 2 Mtg. Holes N P J Travel M Figure 2: Class 8810 NEMA Sizes 0, 1, and 2 Table 16.172: Non-Reversing, Open Type Type B L K Floor Mount NEMA Size C H SDA Fig. No. G F D SBA and SCA SJA3 & 4 E D Table 16.171: NEMA 12/3R Enclosure (see Figure 1) A B C D E G H 5-5/16 8 5/8 5-5/16 — — — 7/32 6-29/32 — 7/32 3-13/32 15/32 6-7/32 — 7/32 6-1/32 10-3/8 1/2 6-1/32 — — — 1/4 8-1/8 6-1/4 5/32 4-1/2 3/8 7-1/2 — 3/16 14-7/16 17 12-1/4 1-1/2 11/16 1/2 6-7/16 7-3/8 1-21/32 12-3/4 12-9/32 11-3/4 10-3/4 1-1/32 1/2 1/2 2-1/2 6-3/4 4 18-5/8 15-19/32 17 12-1/4 1-27/32 1-1/2 1-1/8 6-7/16 SFO3, 4 4 14-1/4 14-19/32 13-1/4 12-1/4 1-27/32 1/2 1/2 SGO1, 2a 4 29-9/32 SGO3, 4 4 19-9/32 20-9/32 9-3/8 5-13/32 1-9/32 28 20-9/32 9-3/8 5-13/32 1-9/32 18 SHO1, 2a 4 29-17/32 22-7/16 9-17/32 6-31/32 3-13/16 SHO3, 4 4 19-17/32 22-7/16 9-17/32 6-31/32 3-13/16 SBO1, 2 SCO1, 2 SBO3, 4 SCO3, 4 4 9-5/8 7-11/32 3 7-1/8 6-29/32 SDO1, 2 6 12-1/32 8-17/32 SDO3, 4 3 9 8-1/16 SEO1, 2 4 18 SEO3, 4 4 SFO1, 2 F I J K L M N 4-3/4 2-1/4 5-1/16 19/32 3-9/16 1-5/8 5-1/16 19/32 5-3/4 2-13/16 5-5/32 25/32 4-11/32 2-5/32 5-5/32 25/32 2-5/32 — — — 1-5/32 1-5/32 — — — 7-21/32 1-21/32 1-21/32 — — — 2-15/16 7-3/8 1-21/32 1-21/32 — — — 5/8 12-9/16 19 5/8 22-17/32 1/2 2-13/32 6-5/8 5/8 2-5/8 19 5/8 12-17/32 1/2 2-13/32 6-5/8 28 3/4 11-5/8 21-3/16 5/8 9-7/8 9/16 3-1/32 9-5/16 18 3/4 21-3/16 1-11/16 5/8 9-7/8 9/16 3-1/32 9-5/16 2 3 3 4 4 5 4 — a b c 6b 7c SJO3, 4 Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). Consequent pole type starters consist of two 3-pole starters as pictured in Figure 4 and an additional 2-pole shorting contactor (not shown), all on a common base-plate, horizontally mounted. Current transformers used with Size 1 overload relay blocks. Solid state overloads and special current transformers. 16 NOTE: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. Dimensions are shown in inches. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS A F E A C 7.00 178 .50 13 E G C .50 13 D B I B K RESET RESET J G H I Prov. for (4) .31 Dia. Mtg. Screws 8 .50 F 13 .56 14 Figure 3: Class 8810 NEMA Sizes 3 and 4 16-62 Reset Travel 6.25 159 D H M M K M M N J (4) L Dia. Mtg. Holes Figure 4: Class 8810 NEMA Size 5 and 6 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Two-Speed Combination Starters Class 8810 / Refer to Catalog 8502CT9701 www.schneider-electric.us Approximate Dimensions Disconnect Switch or Circuit Breaker Type Table 16.173: NEMA 1 Enclosure Figure 1 NEMA Size Class Type 0–1 8810 Dimensions (in inches)—see Figure 1 A B C CBG UBG DBG CCG UCG DCG 13-7/8 23-1/8 D 8-1/4 10-5/8 E F G H I 21 19-9/32 1-7/8 1-7/8 Top & Bottom J K 3-3/4 2-5/16 L 1-1/16 M 3-19/64 2-3/16 Sides N O W X Y 1-1/4 7/8 1/2–3/4–1 1/2–3/4–1 1/2 1–1-1/4 2 8810 CDG UDG DDG 15-5/32 28-29/32 9-9/16 11-5/8 26-1/4 21-13/16 2-3/16 2 4 2-5/8 1/2–3/4 1/2 3a 8810 CEG UEG DEG 22-1/8 42-5/8 2-11/32 2-1/8 4-1/4 2-5/8 1-1/4 3-19/64 2-1/4 7/8 3/4 1–1-1/4–1-1/2 1/2–3/4 1/2 4a 8810 CFG UFG DFG 22-1/8 50-1/8 10-3/16 18-5/8 47-1/2 29-3/16 2-29/32 2-11/16 5-3/8 2-5/8 1-5/16 3-19/64 2-1/4 7/8 3/4 1/2 10-1/8 18-5/8 40 29-1/8 1-21/64 3-19/64 2-7/32 1-17/64 29/32 2-1/2 1/2–3/4 Table 16.174: NEMA 4 Enclosure Figure 2 Dimensions (in inches)—see Figure 2 NEMA Size Class Type 0–1 8810 CBW UBW DBW CCW UCW DCW Top & Bottom Bottom A B C D E F G H I J K L W X 13-7/8 8-21/64 25-3/16 3-19/64 2-9/16 8-3/4 24 19/32 3-61/64 1-5/8 2-5/16 18-17/32 3/4 Hub 1 Hub 1-1/2 Hub 2 8810 CDW UDW DDW 15-1/8 9-37/64 30-15/16 3-19/64 2-9/16 10 29-3/4 19/32 3-61/64 2 2-5/8 21-11/32 3/4 Hub 3a 8810 CEW UEW DEW 22-1/8 10-1/8 46-1/4 3-19/64 3 16 44 5/8 3-15/16 1-3/4 2-5/8 29-1/8 3/4 Hub 2 Hub 4a 8810 CFW UFW DFW 22-1/8 10-3/16 53-3/4 3-19/64 3 16 51-1/2 5/8 3-15/16 2-9/32 3-3/16 29-3/16 3/4 Hub 2-1/2 Hub Table 16.175: NEMA 12 Enclosure Figure 3 a NEMA Size Class Type 0–1 8810 Dimensions (in inches)—see Figure 3 A B C D E F G H I J CBA UBA DBA CCA UCA DCA 13-7/8 10-3/32 24-3/4 3-19/64 2-9/16 8-3/4 24 3/8 3-61/64 20-9/32 23-7/16 2 8810 CDA UDA DDA 15-5/32 10-31/32 31-1/4 3-19/64 3-5/64 9 30-1/4 1/2 4-53/64 3a 8810 CEA UEA DEA 22-1/8 10-1/8 45 3-19/64 3 16 44 5/8 3-15/16 29-1/8 4a 8810 CFA UFA DFA 22-1/8 10-3/16 52-1/2 3-19/64 3 16 51-1/2 5/8 3-15/16 29-3/16 Size 3 (5-Pole–3-Pole) with FA, KA breaker or 100 A disconnect switch. Size 4 (5-Pole–3-Pole) with KA breaker or 200 A disconnect switch. Size 3 & 4 (3-Pole–3-Pole) enclosures may be smaller. Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) for additional dimensional information. NOTE: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. HANDLE SWING L A M D HANDLE SWING HANDLE SWING C A F N K D E A F B H D E B H O Y E B G C G C (4) .31 DIA. MTG.HOLES 8 (for Size 0, 1, & 2) (4) .31 DIA. MTG.HOLES 8 (for Size 0, 1, & 2) Y COVER OPEN 90° (4) .31 DIA. MTG.HOLES 8 (for Size 0, 1, & 2) COVER OPEN 90° F J L X W W G J X J I I H I K Figure 2: NEMA 4 Enclosure Figure 3: NEMA 12 Enclosure 16 Figure 1: NEMA 1 Enclosure NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS W © 2009 Schneider Electric All Rights Reserved 16-63 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Multipole Lighting Contactors, Type L & LX Features • • • • 30 A fluorescent lighting rating, 20 A tungsten lighting rating Electrically and mechanically held 2 through 12-pole versions Field-convertible contacts with N.O. and N.C. indicators (8 N.C. contacts maximumd) Silver-Cadmium-Oxide double break contacts • File E78427 CCN NRNT Type L File LR60905 Class 3211 07 Type LX Table 16.176: Multipole Lighting Contactors (50–60 Hz) Contact Ampere Ratings No. of Poles NEMA 1 General Purpose Enclosure Type NEMA 1 Flush Mounting General Purpose Enclosure with Plaster Adjustment $ Pricea Type $ Pricea NEMA 4 & 4X Watertight, Dusttight and CorrosionResistant GlassPolyester Enclosure NEMA 3R Rainproof Enclosuree Type $ Pricea Type NEMA 4 & 4X Watertight, Dusttight Brushed Stainless Steel Enclosure $ Pricea Type $ Pricea NEMA 12/3Rf Dusttight and Driptight Industrial Use Enclosure Type Open Typeb $ Pricea Type $ Pricea Electrically Heldd LO20c 404.00 2 LG20c 446.00 LF20c 689.00 LH20c 860.00 LWW20c 1146.00 LW20c 917.00 LA20c 860.00 903.00 LO30c 446.00 3 LG30c 489.00 LF30c 732.00 LH30c 903.00 LWW30c 1197.00 LW30c 959.00 LA30c 1031.00 LO40c 575.00 4 LG40c 617.00 LF40c 860.00 LH40c 1031.00 LWW40c 1358.00 LW40c 1088.00 LA40c 6 LG60c 890.00 LF60c 1031.00 LH60c 1202.00 LWW60c 1571.00 LW60c 1259.00 LA60c 1202.00 LO60c 746.00 30c 8 LG80c 1160.00 LF80c 1301.00 LH80c 1472.00 LWW80c 1908.00 LW80c 1529.00 LA80c 1472.00 LO80c 1017.00 10 LG1000c 1331.00 LF1000c 1472.00 LH1000c 1643.00 LWW1000c 2123.00 LW1000c 1700.00 LA1000c 1643.00 LO1000c 1188.00 12 LG1200c 1529.00 LF1200c 1673.00 LH1200c 1844.00 LWW1200c 2372.00 LW1200c 1899.00 LA1200c 1844.00 LO1200c 1386.00 Mechanically Helde 2 LXG20c 702.00 LXF20c 975.00 — — LXWW20c 1728.00 LXW20c 1728.00 LXA20c 1017.00 LXO20c 590.00 3 LXG30c 738.00 LXF30c 1008.00 — — LXWW30c 1764.00 LXW30c 1764.00 LXA30c 1052.00 LXO30c 624.00 4 LXG40c 761.00 LXF40c 1031.00 — — LXWW40c 1785.00 LXW40c 1785.00 LXA40c 1074.00 LXO40c 647.00 30c 6 LXG60c 1160.00 LXF60c 1430.00 — — LXWW60c 2186.00 LXW60c 2186.00 LXA60c 1472.00 LXO60c 1044.00 1173.00 8 LXG80c 1287.00 LXF80c 1557.00 — — LXWW80c 2313.00 LXW80c 2313.00 LXA80c 1601.00 LXO80c 1314.00 10 LXG1000c 1430.00 LXF1000c 1700.00 — — LXWW1000c 2456.00 LXW1000c 2456.00 LXA1000c 1742.00 LXO1000c 12 LXG1200c 1580.00 LXF1200c 1850.00 — — LXWW1200c 2604.00 LXW1200c 2604.00 LXA1200c 1893.00 LXO1200c 1466.00 a Price does not include holding circuit contact. b Separate enclosures are available for these devices. It may be possible to improve delivery by ordering an open type contactor and separate Class 9991 enclosure. c Coil voltage code must be specified to order this product. Refer to standard voltage codes listed below. All lighting contactors are provided with separate control as standard. d Factory conversion of N.O. contacts to N.C., order by catalog number and add $42.80 to price (i.e. For 6 N.O. and 2 N.C. poles on an 8 pole contactor, order as 8903LG62V02). Versions are available from the factory with up to 12 N.C. poles electrically held or 2, 4, 6 and 12 N.C. poles mechanically held. For field conversion, there is a maximum of eight N.C. poles for Type L and a maximum of six N.C. poles for Type LX contactors. e Cannot support control transformer forms. f NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service entrance rated applications. See page 16-104 for more information. Table 16.177: Power Poles for Type L or LX The kits below are used to add 30 Ampere power poles to existing Type L contactors when additional circuits are required. Type L lighting contactors are supplied with mounting brackets, so that adder poles may be mounted from the front by a single captive screw. Adder poles are supplied standard with N.O. contacts which are convertible to N.C. Power Pole Adder Kitg Class 8903 Type $ Price Can Only Be Added to Contactor Typeh Single Pole L1L L1R LO60 LXO60 LO80 LXO80 LO1000 LXO1000 86.00 86.00 Double Pole L3L 171.00 L3R 171.00 8903LO (electrically held) devices can accommodate 10 or 12 N.C. contacts use only 120 V 60Hz coils. LO60 & LXO60—add 1-pole kits only, 1 on each side, for converting to 8-pole. To maintain proper operation, it cannot be converted to greater than 8-pole contactor. LO80 & LXO80—use single-pole kits, 1 on each side, for converting to 10-pole and use two-pole kits, 1 on each side, for converting to 12-pole. LO1000 & LXO1000—remove existing single pole kit and install two-pole kits, 1 on each side, for converting to 12-pole. g h Type L3L Type LO80 Type L3R Table 16.178: Coil Voltage Codes Voltage 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 60 Hz 50 Hz 24 — 120 110 208 — 240 220 277 — 480 440 Specify Specify Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-69 Replacement Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 16-114, 16-115 Replacement Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-116 Code $ Price Adder V01 V02 V08 V03 V04 V06 V99 No Charge No Charge No Charge No Charge No Charge No Charge 35.60 Type L1L Type LO60 Type L1R Table 16.179: How to Order • • • • To Order Specify: Class Number Type Number Voltage Code Form(s) 16-64 Class 8903 Catalog Number Type Voltage Code LXG60 VO4 Form(s) CF4R6 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Features • Electrically and mechanically held • 30–800 A lighting ratings • 2- through 5-pole versions (5-poles through 200 A) • • • UL Listed short-circuit rating up to 100,000 Amperes Factory wired controls and clearly marked termination points Quick ship on most items in 5–7 days No. of Poles Contact Ampere Ratings Table 16.180: Multipole Lighting Contactors—Type S (50–60 Hz) NEMA 1 General Purpose Enclosure Type $ Priceb NEMA 1 Flush Mounting General Purpose Enclosure with Plaster Adjustment Type $ Priceb NEMA Type 3R Rainproof Enclosuref Type $ Priceb NEMA 4 & 4X Watertight, Dusttight and CorrosionResistant GlassPolyester Enclosure Type $ Priceb NEMA Type 4 & 4Xa Watertight and Dusttight Enclosure NEMA Type 12 / 3Rh Dusttight and Driptight Industrial Use Enclosure Type Type $ Priceb $ Priceb Open Type Type $ Priceb Electrically Heldc 2 SMG1d 476. SMF1d 660. SMH1d 647. SMW21d 989. SMW1d 989. SMA1d 647. SMO1de 446. SMG2d 518. SMF2d 689. SMH2d 689. SMW22d 1031. SMW2d 1031. SMA2d 810. SMO2de 488. 30 3 4 SMG3d 633. SMF3d 818. SMH3d 804. SMW23d 1146. SMW3d 1146. SMA3d 804. SMO3de 603. 5 SMG4d 831. SMF4d 1017. SMH4d 1002. SMW24d 1344. SMW4d 1344. SMA4d 1002. SMO4de 534. 2 SPG1d 975. SPF1d 1215. SPH1d 1287. SPW21d 1998. SPW1d 1998. SPA1d 1287. SPO1de 831. SPG2d 1031. SPF2d 1272. SPH2d 1344. SPW22d 2057. SPW2d 2057. SPA2d 1344. SPO2de 890. 60 3 4 SPG3d 1287. SPF3d 1529. SPH3d 1601. SPW23d 2712. SPW3d 2712. SPA3d 1601. SPO3de 1146. 5 SPG4d 1857. SPF4d 2100. SPH4d 2142. SPW24d 3281. SPW4d 3281. SPA4d 2142. SPO4de 1715. 2 SQG1d 1601. SQF1d 2015. SQH1d 1971. SQW21d 3815. SQW1d 3054. SQA1d 1971. SQO1de 1314. SQG2d 1715. SQF2d 2127. SQH2d 2084. SQW22d 3959. SQW2d 3167. SQA2d 2084. SQO2de 1430. 100 3 4 SQG3d 2114. — — SQH3d 2484. — — SQW3d 3965. SQA3d 2484. SQO3de 1827. 5 SQG4d 3024. — — SQH4d 3396. — — SQW4d 4877. SQA4d 3396. SQO4de 2739. 6245. SVA1d 4991. SVO1d 3167. 2 SVG1d 3765. — — SVH1d 4991. — — SVW1d 6501. SVA2d 5247. SVO2d 3423. SVG2d 4022. — — SVH2d 5247. — — SVW2d 200 3 8864. SVA3d 7011. SVO3d 4761. 4 SVG3d 5285. — — — — — — SVW3d Electrically Held 10646. SVA4d 8793. SVO4d 6543. 5 SVG4d 7127. — — — — — — SVW4d SXG1d 7952. — — — — — — SXW1d 11087. SXA1d 11087. SXO1d 6857. 300 2 3 SXG2d 8550. — — — — — — SXW2d 11685. SXA2d 11685. SXO2d 7455. 2 SYG1d 20813. — — — — — — SYW1d 27935. SYA1d 24659. SYO1d 16299. 400g 3 SYG2d 23534. — — — — — — SYW2d 30654. SYA2d 27378. SYO2d 19020. SZG1d 25550. — — — — — — SZW1d 32670. SZA1d 29394. SZO1d 20879. 600g 2 3 SZG2d 28704. — — — — — — SZW2d 35825. SZA2d 32549. SZO2d 24026. 2 SJG1d 30285. — — — — — — SJW1d 37535. SJA1d 33845. SJO1d 25457. 800g 3 SJG2d 33875. — — — — — — SJW2d 40995. SJA2d 37719. SJO2d 29033. Mechanically Heldc 2 SMG10d 738. SMF10d 923. — — SMW31d 1251. SMW10d 1251. SMA10d 912. SMO10de 710. SMG11d 782. SMF11d 966. — — SMW32d 1295. SMW11d 1295. SMA11d 953. SMO11de 752. 30 3 4 SMG12d 824. SMF12d 1008. — — SMW33d 1337. SMW12d 1337. SMA12d 995. SMO12de 795. 5 SMG13d 1025. SMF13d 1209. — — SMW34d 1538. SMW13d 1538. SMA13d 1196. SMO13de 995. 2 SPG10d 1485. SPF10d 1758. — — SPW31d 2511. SPW10d 2511. SPA10d 1800. SPO10de 1373. 3 SPG11d 1544. SPF11d 1814. — — SPW32d 2570. SPW11d 2570. SPA11d 1857. SPO11de 1430. Mechanically Held 60 4 SPG12d 1827. SPF12d 2100. — — SPW33d 3252. SPW12d 3252. SPA12d 2142. SPO12de 1715. 5 SPG13d 2399. SPF13d 2669. — — SPW34d 3824. SPW13d 3824. SPA13d 2712. SPO13de 2285. 2 SQG10d 2084. SQF10d 2241. — — SQW31d 4419. SQW10d 3537. SQA10d 2456. SQO10de 1827. SQG11d 2199. SQF11d 2357. — — SQW32d 4563. SQW11d 3653. SQA11d 2570. SQO11de 1943. 100 3 4 SQG12d 2627. — — — — — — SQW12d 4478. SQA12d 2996. SQO12de 2370. 5 SQG13d 3537. — — — — — — SQW13d 5390. SQA13d 3909. SQO13de 3281. 2 SVG10d 5333. — — — — — — SVW10d 7811. SVA10d 6557. SVO10d 4505. 200 3 SVG11d 6015. — — — — — — SVW11d 8495. SVA11d 7241. SVO11d 4877. 4 SVG12d 7353. — — — — — — SVW12d 10859. SVA12d 9008. SVO12d 6215. SXG13d 9320. — — — — — — SXW13d 12455. SXA13d 12455. SXO13d 7554. 300 2 3 SXG14d 10232. — — — — — — SXW14d 13365. SXA14d 13365. SXO14d 7811. 2 SYG16d 22593. — — — — — — SYW16d 29714. SYA16d 26441. SYO16d 18080. 400 3 SYG17d 25316. File E78427 — — — — — — SYW17d 32436. SYA17d 29160. SYO17d 20799. CCN NRNT SZG18d 27329. — — — — — — SZW18d 34451. SZA18d 31175. SZO18d 22658. 600 2 3 SZG19d 30483. — — — — — — SZW19d 37605. SZA19d 34329. SZO19d 25806. a NEMA 4 & 4X enclosures are brush finished stainless steel for contactors sized 30 A through 300 A. Sizes 400–800 A are painted sheet steel. b Price does not include holding circuit contact. File LR60905 c All lighting contactors are provided with separate control as standard, except electrically held 400, 600 and 800 A devices. Electrically held 400, 600 and (Open Devices Only) 800 A devices are provided with common control. d Voltage code must be specified to order this product. Refer to standard voltage codes above left. Class 3231 01 e Separate enclosures are available for these devices. It may be possible to improve delivery by ordering an open type contactor and separate Class 9991 enclosure from pages 16-102 and 16-103. f Cannot support control transformer forms. g Form F4T is provided as standard; include line voltage when ordering. Control voltage is 120–60. For 400, 600 and 800 ampere devices—must specify line voltage, not coil voltage. h NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service entrance rated applications. See page 16-104 for more information. Poles for Type S Only Coil Voltage Codesc Voltage For How to Order Information, see page 16-12. Table 16.182: Ampere Rating Description Class 9999 Type $ Price One N.O. SB6 158.00 One N.C. SB7 158.00 30 One N.O. and One N.C. SB8 365.00 Two N.O. SB9 365.00 Two N.C. SB10 365.00 One N.O. SB21j 306.00 One N.C. SB22j 306.00 60 One N.O. and One N.C. SB23j 656.00 Two N.O. SB24j 656.00 Two N.C. SB25j 656.00 j When power pole is added to 60 Ampere contactor, a 4-pole coil is also required. Order from Coil Table page 16-115. 60 A power poles are suitable for use with copper or aluminum wire. Factory Modifications (Forms) . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-69 Replacement Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 16-114, 16-115 Replacement Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16-116 16 Price Code Adder 60 Hz 50 Hz 24i — V01 N/C 120 110 V02 N/C 208 — V08 N/C 240 220 V03 N/C 277 — V04 N/C 480 440 V06 N/C Specify Specify V99 35.60 i 24 volt coils are not available for 200–800 A devices. Contact your nearest Square D/Schneider Electric sales office for additional information. A single-pole or double-pole kit can be added to any 2- or 3-pole 30 or 60 A Type S lighting contactor to make a 4- or 5-pole device. Factory assembled 4- and 5-pole contactors utilize the basic 3-pole device with a single or double-pole kit installed. Only one power pole can be added per contactor. Sufficient room is provided in all enclosure styles for the addition of a power pole kit. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.181: © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-65 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Combination Lighting Contactors, Type S Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Features The features include: disconnect switch and circuit breaker versions; rugged flange-mounted handle; easy installation; occupation of less space; increased operator protection; room to spare for modifications; Class R fuse clips standard; electrically and mechanically held; 30–600 Amperes. It is desirable to install the branch-circuit protective device and lighting contactor, combining switching and over-current protection, in one enclosure. Combination lighting contactors are well suited for industrial, highway and area lighting applications, or where a lighting circuit may have to be disconnected for periodic maintenance. They may also be used for resistance heating loads. Table 16.183: Fusible or Non-Fusible Disconnect Switch (3-Pole, 50–60 Hz) Contactor Ampere Rating File E16151 CCN NRNT Table 16.184: Coil Voltage Codesc Voltage Price Code $Adder 60 Hz 50 Hz 24k — V01 N/C 120 110 V02 N/C 208 — V08 N/C 240 220 V03 N/C 277 — V04 N/C 480 440 V06 N/C Specify Specify V99 35.60 k 24 volt coils are not available for 200 A or larger devices. Contact local Square D Field Sales Office for additional information. Fuse Clip Size (A) Electrically Heldc None 30 30 30 None 60 60 60 None 100 100 100 None 200 200 200 None 300 400 400 Mechanically Heldc None 30 30 30 None 60 60 60 None 100 100 100 None 200 200 200 None 300 400 400 NEMA 4 & 4X b Watertight and Dusttight Enclosure Stainless Steel NEMA 1 General Purpose Enclosure Fuse Clip Spacing (V) NEMA 12/3Re Dusttight, Oiltight Driptight, Industrial Use Enclosure Type $ Pricea Type $ Pricea Type $ Pricea — 600 250 — 600 250 — 600 250 — 600 250 — 600 250 SMG60d SMG61d SMG62d SPG60d SPG61d SPG62d SQG60d SQG61d SQG62d SVG60d SVG61d SVG62d SXG60d SXG61d SXG62d 1301.00 1373.00 1344.00 2042.00 2142.00 2100.00 3396.00 3609.00 3537.00 6629.00 6926.00 6870.00 13905.00 14418.00 14418.00 SMW60d SMW61d SMW62d SPW60d SPW61d SPW62d SQW60d SQW61d SQW62d SVW60d SVW61d SVW62d SXW60d SXW61d SXW62d 2669.00 2739.00 2712.00 4149.00 4248.00 4206.00 7070.00 7284.00 7212.00 11327.00 11627.00 11570.00 25898.00 26411.00 26411.00 SMA60d SMA61d SMA62d SPA60d SPA61d SPA62d SQA60d SQA61d SQA62d SVA60d SVA61d SVA62d SXA60d SXA61d SXA62d 1643.00 1715.00 1686.00 2528.00 2627.00 2583.00 4022.00 4235.00 4163.00 8366.00 8585.00 8607.00 18122.00 18635.00 18635.00 — 600 250 — 600 250 — 600 250 — 600 250 — 600 250 SMG70d SMG71d SMG72d SPG70d SPG71d SPG72d SQG70d SQG71d SQG72d SVG70d SVG71d SVG72d SXG70d SXG71d SXG72d 1458.00 1529.00 1502.00 2583.00 2682.00 2640.00 3909.00 4121.00 4050.00 8081.00 8379.00 8324.00 14261.00 14774.00 14774.00 SMW70d SMW71d SMW72d SPW70d SPW71d SPW72d SQW70d SQW71d SQW72d SVW70d SVW71d SVW72d SXW70d SXW71d SXW72d 2825.00 2897.00 2867.00 4692.00 4791.00 4748.00 7583.00 7797.00 7725.00 12780.00 13080.00 13023.00 26253.00 26766.00 26766.00 SMA70d SMA71d SMA72d SPA70d SPA71d SPA72d SQA70d SQA71d SQA72d SVA70d SVA71d SVA72d SXA70d SXA71d SXA72d 1800.00 1871.00 1844.00 3068.00 3167.00 3123.00 4535.00 4748.00 4676.00 9818.00 10116.00 10061.00 18477.00 18990.00 18990.00 Table 16.185: Circuit Breaker (3-Pole, 50–60 Hz) Ampere Rating NEMA 4 & 4Xb Watertight and Dusttight Enclosure Stainless Steel (30-300 A) NEMA 1 General Purpose Enclosure Circuit Breaker Contactor Ampere Rating Maximum Volts Type $ Pricea Type $ Pricea NEMA 12/3Re Dusttight, Oiltight, Driptight, Industrial Use Enclosure Type $ Pricea Electrically Heldc 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 30 600 SMG81d 1814.00 SMW81d 3182.00 SMA81d 2156.00 30 240 SMG82d 1400.00 SMW82d 2768.00 SMA82d 1742.00 60 600 SPG81d 2541.00 SPW81d 4649.00 SPA81d 3024.00 60 60 240 SPG82d 2127.00 SPW82d 4235.00 SPA82d 2613.00 100 100 600 SQG81d 3666.00 SQW81d 7340.00 SQA81d 4292.00 200 200 600 SVG81d 8181.00 SVW81d 12879.00 SVA81d 9918.00 300 300 600 SXG81d 18023.00 SXW81d 30014.00 SXA81d 21155.00 400 400 600 SYG81d 40085.00 SYW81d 47205.00 SYA81d 43929.00 600 600 600 SZG81d 45090.00 SZW81d 52212.00 SZA81d 48936.00 Mechanically Heldc 30 600 SMG91d 1971.00 SMW91d 3338.00 SMA91d 2313.00 30 30 240 SMG92d 1557.00 SMW92d 2925.00 SMA92d 1899.00 60 600 SPG91d 3081.00 SPW91d 5189.00 SPA91d 3567.00 60 60 240 SPG92d 2669.00 SPW92d 4778.00 SPA92d 3153.00 100 100 600 SQG91d 4179.00 SQW91d 7853.00 SQA91d 4805.00 200 200 600 SVG91d 9633.00 SVW91d 14333.00 SVA91d 11970.00 300 300 600 SXG91d 18378.00 SXW91d 30371.00 SXA91d 21510.00 400 400 600 SYG91d 41864.00 SYW91d 48986.00 SYA91d 45710.00 600 600 600 SZG91d 46728.00 SZW91d 53991.00 SZA91d 50715.00 a Price does not include holding circuit contact. b For NEMA 4 & 4X Watertight, Dusttight and Corrosion-Resistant Glass-Polyester enclosure pricing, multiply stainless steel enclosed price by 1.25 and add Form G18 (limited to 100 A max.). 400 & 600 A enclosures are painted sheet steel (NEMA Type 4 & 4X). c Control/coil voltage must be specified. d Coil voltage codes must be specified to order this product. Refer to standard voltage codes shown on page 16-65. e NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service entrance rated applications. See page 16-104 for more information. 30 For How to Order Information, see page 16-12. 16-66 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com NIGHT-MASTER® Combination Lighting Contactors Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us NIGHT-MASTER Outdoor Combination Lighting Contactors offer disconnecting means, overcurrent protection and a lighting contactor in one NEMA 3R Rainproof enclosure. These combination units satisfy requirements of the National Electrical Code and UL 508 for service entrance equipment. Features: • • • • • • • Solid neutral standard Grounding lug standard Padlocking provisions Short and long versions available Electrically held Type S lighting contactor Eliminates the need for separate mounted safety switches Additional panel space eliminates the need for external mounting of time clocks Table 16.186: Disconnect Switch Type b (3-Pole) Short Version Long Version Contactor Ampere Rating Fuse Clip Size (A) Fuse Clip Spacing (V) Class 8903 Type 3R $ Pricea 30 30 30 60 60 100 100 200 200 600 250 600 250 600 250 600 250 SMC61c SMC62c SPC61c SPC62c SQC61c SQC62c SVC61c SVC62c 2015.00 1956.00 2664.00 2505.00 4571.00 4454.00 8171.00 7986.00 60 100 200 Class 8903 Type 3R Stainless Steel SMH61c SMH62c SPH61c SPH62c SQH61c SQH62c SVH61c SVH62c Long Version $ Pricea Class 8903 Type 3R $ Pricea 3263.00 3150.00 4275.00 4050.00 7425.00 7200.00 12525.00 12825.00 SMC63c SMC64c SPC63c SPC64c SQC63c SQC64c SVC63c SVC64c 2199.00 2177.00 2933.00 2825.00 4797.00 4626.00 8949.00 8868.00 Class 8903 Type 3R Stainless Steel SMH63c SMH64c SPH63c SPH64c SQH63c SQH64c SVH63c SVH64c $ Price a 3600.00 3488.00 4725.00 4500.00 7875.00 7650.00 13725.00 13725.00 Table 16.187: Circuit Breaker Typeb (3-Pole) Circuit Breaker Short Version UL Approved for Service Entrance File E16151 CCN NRNT Contactor Ampere Rating Ampere Rating Maximum Volts Short Version Class 8903 Type 3R $ Pricea Class 8903 Type 3R Stainless Steel SMH81c SPH81c SQH81c SVH81c Long Version $ Pricea Class 8903 Type 3R 30 30 600 SMC81c 2475.00 4050.00 SMC83c 60 60 600 SPC81c 3159.00 5175.00 SPC83c 100 100 600 SQC81c 4544.00 7425.00 SQC83c 200 200 600 SVC81c 8711.00 14175.00 SVC83c a Price does not include holding circuit contact. b All lighting contactors are provided with separate control as standard. c Coil voltage codes must be specified to order this product. Refer to standard voltage codes listed below. $ Pricea 2807.00 3320.00 4841.00 9909.00 Class 8903 Type 3R Stainless Steel SMH83c SPH83c SQH83c SVH83c $ Price a 4500.00 5625.00 7875.00 14625.00 NIGHT-MASTER Combination Lighting Contactors The Class 8903 NIGHT-MASTER Outdoor Combination Lighting Contactor is the only product on the market that is UL Listed for Service Entrance. This allows the contactor to be pole mounted when used to control lighting in remote locations such as parks, monuments, group sports facilities, and streets and highways. Factory modifications such as photocells, time switches, key operated selector switches, and the combination of photocells and time switches (photocell on, time switch off) allow the NIGHT-MASTER to be located in applications where manual operation of lights is not practical. NIGHT-MASTER comes in long and short versions in sizes 30 through 200 Amperes. Most common modifications can be provided from the factory, or added in the field to the pre-drilled and pre-tapped panels. Table 16.188: Coil Voltage Codes Voltage 50 Hz 24d 120 208 240 277 480 Specify — 110 — 220 — 440 Specify Code $ Price Adder V01 V02 V08 V03 V04 V06 V99 No Charge No Charge No Charge No Charge No Charge No Charge 35.60 24 volt coils are not available for 200 A devices. Contact your nearest Square D/Schneider Electric sales office for additional information. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS d 60 Hz 16 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-67 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Panelboard Lighting Contactors, Type PB Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us General Information Panelboard Lighting Contactors, sometimes called remote control switches, are designed for use with lighting panelboards and motor control centers where either panel or bus mounting is desirable. Type PB lighting contactors can be used in a retrofit or new project without increasing the panelboard depth. They can be used to directly replace many inoperative existing switches. The features include: mechanically held; compatible with Square D panelboards; short-circuit ratings to 100 kA; compact arc suppression; bus or panel mounted; fits in standard-depth lighting panelboards; easy manual operation; standard coil clearing contacts; and operates in any position. Table 16.189: Class 8903 Type PB Lighting Contactors Description Bus Mount Panel Mount File E78427 CCN NRNT a Poles Type 2 PBM 10Ba 30 3 PBM 11Ba 2 PBP 10Ba 60 3 PBP 11Ba 2 PBN 10Ba 75 3 PBN 11Ba 2 PBQ 10Ba 100 3 PBQ 11Ba 2 PBR 10Ba 150 3 PBR 11Ba 2 PBV 10Ba 200 3 PBV 11Ba 2 PBW 10Ba 225 3 PBW 11Ba Voltage code must be specified to order this product. Refer to standard voltage codes listed below. Panel Mount (Includes Lugs) Size (A) Voltage Code V02 V08 V39 V28 Description (1) Auxiliary Contact SPDT (2) Auxiliary Contacts SPDT $ Price 243.00 485.00 Description (1) Auxiliary Contact SPDT (2) Auxiliary Contacts SPDT 208 V 1650 2700 4275 $ Price 158.00 314.00 RMS Sym. Current (A) 100,000 22,000 65,000 Amps D A 600 600 240 Table 16.196: Maximum Wire Size (AWG) Power Wire (Cu/Al) #1/0 Max. 350 MCM Max. Current Range 30–100 A 150–225 A Control Wire (Cu Only) #18–#10 #18–#10 Dimensions B C E IN mm IN mm IN mm IN mm IN mm IN mm IN mm 30– 11.75 298 7.50 191 3.88 98 2.25 57 7.38 187 2.25 57 9.25 235 100 150– 14.50 368 7.50 191 3.88 98 2.88 73 8.50 216 3.00 76 10.50 267 225 A 480 V 8800 14400 22800 Short Circuit Protection Device Recommended Class J Fuses Circuit Breaker—Square D—Type LHL Circuit Breaker—Square D—Type LHL Max. Volts Dimensions W 277 V 2925 4700 7550 Table 16.197: Dimensions (Bus Mount) Table 16.193: Dimensions (Panel Mount) H 240 V 2200 3600 5700 Table 16.195: Short-Circuit Ratings Table 16.192: Factory Modifications Form X11 X22 $ Price 2640.00 2973.00 2762.00 3185.00 2762.00 3185.00 3119.00 3546.00 3897.00 4787.00 4409.00 5360.00 4964.00 5990.00 Maximum Distance (feet) 120 V 550 900 1425 #14 #12 #10 Table 16.191: Class 8903—Auxiliary Contacts Type PBX1 PBX2 Type PBM 10a PBM 11a PBP 10a PBP 11a PBN 10a PBN 11a PBQ 10a PBQ 11a PBR 10a PBR 11a PBV 10a PBV 11a PBW 10a PBW 11a Table 16.194: Control Distance Wire Gauge AWG Table 16.190: AC Coil Voltage Codes 60 Hz 120/ 208 240/277 480 Note: For Replacement coils, see page 16-115. $ Price 2129.00 2403.00 2237.00 2573.00 2237.00 2573.00 2541.00 2978.00 3162.00 4055.00 3551.00 4496.00 3909.00 4958.00 Amps H IN W mm IN D mm IN A mm IN B mm IN mm 30– 8.31 211 7.50 191 3.38 86 2.25 57 7.38 187 100 150– 9.50 241 7.50 191 3.38 86 2.88b 73 8.50 216 225 b Slotted mounting holes suitable for 2.88" to 3.19" mounting centers. A A A 16 B H H B NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS E W C W 16-68 D D CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Modifications (Forms) Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Table 16.198: “ON-OFF” (momentary contact) push button A3 A3 A12 C NEMA Enclosure Type Used On Std. Combo NIGHTElec. Mech. Elec. Mech. MASTER a Held Held Held Held 1 Y Y 3R, 4, 12 Y Y Any Y Y Y 1 Y Yj Y Yj Type L 30 Amp 336. 336. 336. 336. 30 Amp 60 Amp 336. 336. 336. 336. 336. 336. 336. 336. 100 Amp 336. 336. 336. 336. 200 Amp 336. 336. 336. 336. 300 Amp 336. 336. 336. 336. 400 600 800 Amp 336. 336. 336. 336. “ON-OFF” push button (with holding circuit interlock) “HAND–OFF–AUTO” selector switch. To substitute a key operated selector switch, use Form C33 and specify positions, legend marking, and key removal. This form must be used with another selector switch C 3R, 4, 12 Y Yj Y Yj Y 336. 336. 336. 336. 336. 336. 336. form (example: CC33). Add $266. (C33) + $224. (C) = $490. “ON-OFF” selector switch. To substitute a key operated C6 1 Y Y Y Y 336. 336. 336. 336. 336. 336. 336. selector switch, use Form C33 and specify positions, legend marking, and key removal. This form must be C6 3R, 4, 12 Y Y Y Y Y 336. 336. 336. 336. 336. 336. 336. used with another selector switch form (example: C33C6). Add $266. (C33) + $224. (C6) = $490. Control circuit fuse (1 fuse) F Any Y Y Y Y Y 314. 314. 314. 314. 314. 314. 314. Control circuit fuses (2 fuses) F4 Any Y Y Y Y Y 314. 314. 314. 314. 314. 314. 314. Control circuit transformer standard capacity 50/60 Hz Fuses Transformer capacity Primary Secondary 2b 0 Std. F4T 1, 4, 12 Y Y Y Y Y 386. 386. 543. 797. 968. 1097. i 1097. c 2 1 Std. FF4T 1, 4, 12 Y Y Y Y Y 698. 698. 855. 1112. 1283. 1412. i 1412. c 2 1 100 VA Add. FF4T11 1, 4, 12 Y Y Y Y Y 975. 975. 1197. 1425. 1566. i 1710. i 1710. c 2 1 200 VA Add FF4T12 1, 4, 12 Y Y Y Y Y 1241. 1241. 1467. 1695. i 1839. i 1839. i 1839. c 2 1 300 VA Add FF4T13 1, 4, 12 Y Y Y Y Y 1481. i 1481. i 1737. i 1967. i 2109. i 2109. i 2109. c Noise reduced enclosure and shock mounted panel G4 Any Y 1389. 1389. 1596. 1674. 2307. 2921. 3924. Addition of photoelectric receptacle G10 1d, 3R, 12 Y Y Y 185. 185. 185. 185. 185. 185. 185. Addition of photoelectric receptacle with photo-cell G101 1d, 3R, 12 Y Y Y 399. 399. 399. 399. 399. 399. 399. Addition of photoelectric receptacle and relay (R6)e G10R6 1d, 12 Y Y 549. 912. 912. 912. 1326. 1467. 1467. With photo-cell installed e G101R6 1d, 12 Y Y 509. 750. 750. 750. 1026. 1121. 1121. Addition of terminal blocks (other than standard). “xx” Represents the number of terminals needed. Available in multiples of 5 only. (PER TERMINAL PRICE) WIRED G56xx Any Y Y Y Y Y 116. 116. 116. 116. 116. 116. 116. (PER TERMINAL PRICE) UNWIRED G50xx Any Y Y Y Y Y 57. 57. 57. 57. 57. 57. 57. Bracketing for internally mounted pilot device G53 Any Y Y Y Y Y 90. 90. 90. 90. 90. 90. 90. Addition of 24 hour time clock (120-277 V only) K14 1, 4, 12 Y Y Y Y 1197. 1197. 1197. 1197. 1197. 1197. 1197. Addition of 24 hour time clock w/day omission (120-277 V) K141 1, 4, 12 Y Y Y Y 1197. 1197. 1197. 1197. 1197. 1197. 1197. Addition of 7 day time clock (120-277 V) K142 1, 4, 12 Y Y Y Y 1368. 1368. 1368. 1368. 1368. 1368. 1368. Addition of 24 hour time clock (120-277 V only) K14 3R Y N/A 783. 783. 783. 783. N/A N/A Addition of 24 hr time clock w/skip day (120-277 V) K141 3R Y N/A 783. 783. 783. 783. N/A N/A Addition of 7 day time clock (120-277 V) K142 3R Y N/A 954. 954. 954. 954. N/A N/A Addition of solid neutral terminal block N 1, 4, 12 Y Y Y Y Std. 116. 116. 116. 171. 342. 714. 855. Red Pilot Light P1 Any Y Y Y Y Y 336. 336. 336. 336. 336. 336. 336. Two or more lights f (each) P Any Y Y Y Y Y 336. 336. 336. 336. 336. 336. 336. Red Push-To-Test Pilot Light P21 Any Y Y Y Y Y 435. 435. 435. 435. 435. 435. 435. Interlock necessary for pilot light g Any Y Y Y Y Y h 158. 158. 158. 158. 158. 158. one needed for each additional pilot light Two Wire Interface for Mechanically Held e R6 Any Y Y 363. 728. 728. 728. 1139. 1283. 1283. Addition of under and overvoltage relay R46 Any Y Y Y Y Y 1463. 1463. 1463. 1463. 1463. 1463. 1463. Three wire control for long distance applicationse R62 Any Y Y 728. 1454. 1454. 1454. 2280. 2564. 2564. Auxiliary contacts (specify number of N.O. + N.C.) X Any Y Y Y Y Y h 158. 158. 158. 158. 158. 158. Addition of DC coil to Type L (7 poles max) Y48 Any Y 243. N/A N/A N/A N/A N/A N/A Auxiliary electrical interlock installed on disconnect switch Y74 Any Y Y Y N/A 158. 158. 158. 158. 414. 414. or circuit breaker operating mechanism 158. 158. 158. 158. 158. N/A Coil Transient suppressor (120 Vac Only) Y145 Any Y Y Y 158. Coil Transient suppressor (120 Vac Only) Y145 Any Y Y 314. 314. 314. 314. 314. 314. 314. Addition of lightning arrestor Y1532 Any Y Y Y Y Y 570. 570. 570. 570. 570. 570. 570. Substitute copper only lugs for standard Y157 Any Y Y Y Y Y N/A N/A N/C N/C N/C N/C N/C a NIGHT-MASTER maximum 200 A, minimum 30 A. b Transformer Voltage Codes. c Mechanically held only. Electrically held device has a control circuit requiring a 120 V secondary, therefore, a transformer is supplied. The transformer comes wired to L1 and L2 unless Form S is called for. It is supplied with two primary and one secondary fuse. d Photocell mounted on a NEMA 1 enclosure is designed for indoor areas which rely on natural light. Addition of the photocell does not make the enclosure suitable for outdoor (NEMA Type 3R) installations. e Available for 24 V, 120 V, 240 V, 277 V and 480 V applications only. f For electrically held enclosed devices, the first pilot is wired in parallel with the coil. Operating interlocks are required for all additional pilot lights. Mechanically held devices require operating interlocks for all pilot lights. g DO NOT use Form X for any interlock which is wired in series with pilot light, but DO specify how pilot light and interlock are to be wired into the circuit. h Electrically held 20 A multipole contactors cannot add interlocks. Additional poles can be used for the same function, however. Mechanically held (Type LX) provide one double throw auxiliary (or status) contact as standard. i Single primary voltage must be specified using the codes shown below: j Form R6 must be used with Form C on mechanically held devices. Voltage 60 Hz 120–24 208–120 240–24 240–120 277–120 480–24 480–120 480–240 600–120 Code V89 V84 V82 V80 V85 V83 V81 V87 V86 Order Example You have previously selected a Class 8903SMG2V02. V02 means that you need a coil voltage of 120-60/110-50 wired for separate control. You would like to add form FF4T with the transformer voltages being 480 volt primary, 120 volt secondary. The new and complete Class, Type, Voltage Code and Form number: 16 k Class Type Voltage Code Formk 8903 SMG2 V81 FF4T Form numbers should always be shown in alphabetical order. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Description Form Letter © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-69 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Field Modifications Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Table 16.199: Types L & LX Description Kit Auxiliary Contacts 1 N.O. LH or RH Mounting 1 N.C. LH or RH Mounting 1 N.C. & 1 N.O. Isolated LH or RH 1 N.O. Overlapping LH or RH 1 N.C. Overlapping LH or RH Control Circuit Fuse Holder Single Fuse Unit Two Fuse Unit Type S 30 Amp — — — — — 9999LLX and 9999SFR3 9999LLX and 9999SFR4 30 Amp $ Price 60 Amp 200 Amp 400, 600, 800 Amp 300 Amp $ Price Kit $ Price Kit $ Price Kit $ Price Kit 86.00 9999SX6 86.00 9999SX7 116.00 9999SX8 116.00 9999SX9 116.00 9999SX10 86.00 86.00 116.00 116.00 116.00 9999SX6 9999SX7 9999SX8 9999SX9 9999SX10 86.00 86.00 116.00 116.00 116.00 9999SX6 9999SX7 9999SX8 9999SX9 9999SX10 86.00 86.00 116.00 116.00 116.00 9999SX6 9999SX7 9999SX8 9999SX9 9999SX10 86.00 86.00 116.00 116.00 116.00 9999SX6 9999SX7 9999SX8 9999SX9 9999SX10 86.00 86.00 116.00 116.00 116.00 X 9999SFR3 64.00 9999SFR3 64.00 9999SFR3 64.00 9999SFR3 64.00 9999SFR3 64.00 9999SFR3 64.00 F 9999SFR4 86.00 9999SFR4 86.00 9999SFR4 86.00 9999SFR4 86.00 9999SFR4 86.00 9999SFR4 86.00 F4 — 9070T150 — 9070T300 — 9070T500 — 9070T750 — T — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Kit — 9999SX6 — 9999SX7 — 9999SX8 — 9999SX9 — 9999SX10 $ Price 100 Amp Kit $ Form Price No. 23.70 42.80 23.70 57.00 Transformers (For Prices 9070T50 — See Class 9070 Section) Oversized Enclosures (Non-Combo) NEMA 1 9991SDG3 266.00 NEMA 4 9991SDW3 779.00 NEMA 12 9991SDA3 456.00 Standard Enclosures NEMA 1–Surface Mount 9991LXG1 95.00 NEMA 3R 9991SDH1 323.00 NEMA 4–Standard 9991SDW1 NEMA 4–With 2 Cvr Mtd. Clsng 9991SDW11 779.00 798.00 Plts 9991SDW20 779.00 NEMA 4X–Glass Polyester 9991SDA11 323.00 NEMA 12 — — NEMA 1–Flushmount–Complete — — NEMA 1–Flush Mount Parts — — FLUSH PARTS 9991SDF13 114.00 Standard–Elec. held 9991SDF13 114.00 Standard–Mech. held 9991SDF2 66.00 Mounting Strap 9991SDF1 77.00 Pull Box 9070T100 — 9070T100 9991SDG3 339.00 9991SDG3 339.00 9991SDW3 1169.00 9991SDW3 1169.00 9991SDA3 684.00 9991SDA3 684.00 9991SCG7a 9991SCH2 9991SCW1 9991SCW11 9991SCW20 9991SCA11 — — — 9991SCF11 9991SCF13 9991SCF2 9991SCF1 57.00 372.00 684.00 714.00 684.00 372.00 — — — 57.00 201.00 71.00 86.00 9991SDG7a 143.00 9991SFG8 599.00 9991SDH1 485.00 9991SEH1 684.00 9991SDW1 1169.00 — — 9991SDW11 1197.00 9991SEW11 1767.00 9991SDW20 1169.00 — — 9991SDA11 485.00 9991SEA11 684.00 — — 9991SEF11 882.00 — — — — — — — — 9991SDF11 171.00 — — 9991SDF13 171.00 — — 9991SDF2 99.00 — — 9991SDF1 116.00 — — 9991SFG4 9991SFH1 — — — — — — — — — — — 1259.00 1853.00 — — — — — — — — — — — — — — 9991SGG8 1241.00 — — — — — — — — — — — — — — — — — — — — — — — — 16 Internal Operator 3010215901 26.10 3010215901 39.20 3010215901 39.20 3010215901 39.20 3010215901 39.20 3010215901 39.20 3010215901 39.20 G53 Mounting Bracket Solid Neutral 9999SN1 89.00 9999SN1 134.00 9999SN1 134.00 9999SN1 134.00 9999SN2 392.00 9999SN2 392.00 9999SN3b 624.00 N Combination Lighting Contactor Disconnect Interlock Kit Breaker Type 1-Pole — — 9999R26 131.00 9999R26 131.00 9999R26 131.00 9999R26 131.00 9999R26 131.00 9999R26 131.00 2-Pole — — 9999R27 243.00 9999R27 243.00 9999R27 243.00 9999R27 243.00 9999R27 243.00 9999R27 243.00 Disconnect Type 1-Pole — — 9999TC11 120.00 9999TC10 116.00 9999TC10 120.00 9999R8 131.00 9999R35 435.00 9999R26 131.00 2-Pole — — 9999TC21 239.00 9999TC20 221.00 9999TC20 239.00 9999R9 243.00 9999R36 521.00 9999R27 243.00 Y74 Lightning Arrestor 175 Vac to Ground Max SDSA1175 92.00 SDSA1175 92.00 SDSA1175 92.00 SDSA1175 92.00 SDSA1175 92.00 SDSA1175 92.00 SDSA1175 92.00 2 or 3 wire Grounded Y1532 650 Vac to Ground Max SDSA3650 248.00 SDSA3650 248.00 SDSA3650 248.00 SDSA3650 248.00 SDSA3650 248.00 SDSA3650 248.00 SDSA3650 248.00 3 or 4 wire Grounded VERSA CRIMP® Lugs (Price Ea.) c Range #8–1/0 Al/Cu — — — — — — VCEL02114S1 7.70 — — — — — — #1–2/0 Al/Cu — — — — — — — — VCEL022516H1 12.20 — — — — 2/0–4/0 Al/Cu — — — — — — — — VCEL024516H1 16.10 — — — — 4–300 kcmil Al/Cu — — — — — — — — VCEL030516H1 49.10 — — — — 2/0–500 kcmil Al/Cu — — — — — — — — — — VCEL05012H1 64.00 — — 400–600 kcmil Al — — — — — — — — — — VCEL06012H1 44.60 — — 400–500 kcmil Cu — — — — — — — — — — VCEL06012H1 44.60 — — 500–750 kcmil Al — — — — — — — — — — VCEL07512H1 58.00 — — 500 kcmil Cu — — — — — — — — — — VCEL07512H1 58.00 — — 400–600 kcmil Al — — — — — — — — — — — — VCEL06012H2d 47.70 400–500 kcmil Cu — — — — — — — — — — — — VCEL06012H2d 47.70 500–750 kcmil Al — — — — — — — — — — — — VCEL07512H2d 48.20 500 kcmil Cu — — — — — — — — — — — — VCEL07512H2d 48.20 Hardware 2-Pole c — — — — — — — 9999AL13 143.00 Hardware 3-Pole — — — — — — Not Needed — 9999AL14 179.00 9999AL11 53.40 9999AL12 116.00 Hardware 4-Pole — — — — — — — 9999AL15 215.00 9999AL11 53.40 9999AL12 116.00 a For electrically held only. b Limited to 400 and 600 A versions. 800 A is a factory modification only. c VERSA CRIMP Lug prices subject to change. 9999AL hardware kit is also required. Two 1-pole kits required. d One or two lugs may be mounted on each terminal. Limited to 400 and 600 A versions. 800 A is factory modification only. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-70 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Field Modifications Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Table 16.200: Mechanically Held TYPE LX Description Form No. PUSH BUTTON (ON-OFF) NEMA 1 Enclosure NEMA 3R, 4 or 12 Enclosure SELECTOR SWITCH (2 POSITION) NEMA 1 Enclosure NEMA 3R, 4 or 12 Enclosure SELECTOR SWITCH (3 POSITION) NEMA 1 Enclosure (MUST INCLUDE TWO WIRE CONTROL RELAY, Form R6 NEMA 3R, 4 or 12 Enclosure TWO WIRE CONTROL RELAY (Form R6)f A3 C6 C TYPE S 30 Amp 30 Amp Kit $ Price 9999BLX 9999LXPB 35.60 116.00 Kit a 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 60 Amp $ Price 100 Amp 200 Amp 300 Amp 400, 600, 800 Amp Kit $ Price Kit $ Price Kit $ Price Kit $ Price Kit $ Price — 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9001KA2 9999SA3b 21.50 215.00 9999BLX 9999LXS 35.60 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 116.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 4.40 96.00 9001KN244 9001KS11BH1 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 4.40 96.00 9999BLX 9999SC2 35.60 116.00 9001KN260 4.40 9001KN260 4.40 9001KN260 4.40 9001KN260 4.40 9001KN260 4.40 9001KN260 4.40 9001KS46BH2 138.00 9001KS46BH2 138.00 9001KS46BH2 138.00 9001KS46BH2 138.00 9001KS46BH2 138.00 9001KS46BH2 138.00 9001KN260 4.40 9001KS46BH2 138.00 R6 9999RLX CA2SK11g 35.60 95.00 8501X011 201.00 8501X011 201.00 8501X011 201.00 8501X011 201.00 8501X011 201.00 8501X011 201.00 Table 16.201: Electrically Held TYPE L Description Form No. 30 Amp TYPE S 30 Amp 60 Amp 100 Amp 200 Amp 300 Amp 400, 600, 800 Amp 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Kit $ Price Kit $ Price Kit $ Price Kit $ Price Kit $ Price Kit $ Price Kit $ Price PILOT LIGHTS (RED and GREEN) c d d NEMA 1 Enclosure P1 9999SP28R 215.00 9999SP2R 215.00 9999SP3R 215.00 9999SP14R 215.00 9999SP28R 215.00 9999SP28R 215.00 9999SP28R 215.00 NEMA 3R, 4 or 12 9999SP28R 215.00 9999SP28R 215.00 9999SP28R 215.00 9999SP28R 215.00 9999SP28R 215.00 9999SP28R 215.00 Enclosure PUSH BUTTONSe 9999BLX 35.60 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 NEMA 1 Enclosure 9999SA10 116.00 9999SA10 116.00 9999SA10 116.00 A12 NEMA 3R, 4 or 12 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 9999SA3 215.00 Enclosure SELECTOR SWITCH 9999BLX 35.60 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 (2 POSITION) 9999SC22 116.00 9999SC22 116.00 9999SC22 116.00 9999SC22 116.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 NEMA 1 Enclosure C6 NEMA 3R, 4 or 12 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 9001KN244 4.40 Enclosure 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BM1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 9001KS11BH1 96.00 SELECTOR SWITCH 9999BLX 35.60 (3 POSITION) 9999SC2 116.00 9999SC2 116.00 9999SC2 116.00 9999SC8 215.00 9999SC8 215.00 9999SC8 215.00 9999SC2 116.00 NEMA 1 Enclosure C NEMA 3R, 4 or 12 9999SC8 215.00 9999SC8 215.00 9999SC8 215.00 9999SC8 215.00 9999SC8 215.00 9999SC8 215.00 9999SC8 215.00 Enclosure a No field installed kit available. b Mechanically held contactors need two distinct signals to operate. An N.O. contact block must be added to the Class 9999 Type SA3 push button kit. c Selection for 2- or 3-Pole only; for 4- or 5-Pole use Class 9999SP15R $215. d The coil voltage must be the same as the pilot light rating. Kit contains one (1) Class 9001, Type KP1R6 120 V/60 Hz red pilot light control unit. For other voltages, refer to the Class 9001, Type KP Control Section. e Requires holding circuit interlock for Type S or additional power pole on Type L devices. f Form R6 available for 24 V, 120 V, 240 V and 277 V only. g Insert CA2SK11( ) voltage code from page 23-20. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-71 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Approximate Dimensions Table 16.202: Open Type Electrically Held Ampere Rating Type Number of Poles 2–4 30 LO 6 8–12 2–3 30 SMO 4–5 2–3 60 SPO 4–5 2–3 100 SQO 4–5 2–3 200 SVO 4 & 5a A 2.88 73 4.25 108 5.63 143 4.34 110 4.34 110 5.33 135 6.22 158 7.09 180 7.82 199 9.14 232 9.14 232 12.31 313 300 SXO 400 600 SYO SZO 2–3 — 800 SJO 2–3 — a 2–3 Mechanically Held Dimensions B 5 127 5 127 5 127 3.22 82 4.25 108 4.31 110 5.61 142 5.45 138 9.75 248 6.00 152 9.75 248 8.66 220 12.33 313 12.33 313 C 4.62 117 4.62 117 4.62 117 4.22 107 4.22 107 4.94 125 4.94 125 6.50 165 6.50 165 6.50 165 6.50 165 8.74 222 9.00 229 11.94 303 E 3.12 79 3.12 79 3.12 79 3.50 89 3.50 89 5.50 140 5.50 140 7.26 184 7.26 184 9.14 232 9.14 232 12.25 311 27.78 706 42.70 1085 A Dimensions Type A 2.88 73 4.25 108 5.63 143 7.15 182 7.15 182 8.25 210 8.70 221 10.13 257 10.56 268 11.35 288 11.55 293 12.31 313 LXO B C — — — — — — 4.68 119 4.68 119 5.23 133 5.23 133 6.72 171 6.72 171 6.72 171 6.72 171 10.50 267 10.50 267 — SYO SZO — 3.79 96 4.54 115 4.61 117 5.90 150 5.94 151 9.75 248 6.00 152 9.75 248 8.66 220 8.66 220 — — — — — — — — — SVO SXO D 8.81 224 8.81 224 8.81 224 F 7.70 196 7.70 196 7.70 196 — E 3.25 83 3.25 83 3.25 83 6.04 153 6.04 153 7.81 198 7.81 198 7.26 184 7.26 184 9.14 232 9.14 232 12.31 313 21.00 533 — — — — — — — — — — — — B D E C Mtg. Mtg. 2.25 57 F Mtg. — — — Open Type L & LX — — — — — — — A E 5-Pole, electrically held only. Table 16.203: NEMA 1 Enclosure (Non-Combination) Electrically and Mechanically Held Ampere Rating 30 Number Type of Poles LG, LXG Any SMG 2–5 30 30 2–5 60 SPG 2–5 2–5 2&3 100 SQG 16 4&5 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 200 Dimensions Width Height Depth Standard, A3, A12, C, C6, 7.81 12.69 6.03 F, R6, Y48 198 322 153 11.88 11.88 7.44 P, T 302 302 189 16.00 22.00 7.13 K14, K141, K142 406 559 181 Electrically Held Std., A12, C, C6, P, X 6.00 10.00 5.28 152 254 134 Mechanically Held Std., X 6.34 15.88 5.19 T 161 403 132 Electrically Held N 14.88 14.12 7.56 378 359 192 T, N, R6 Mechanically Held 8.12 14.12 9.73 A3, C, C6, P 206 359 247 12.69 6.03 Electrically Held Std., A12, C, C6, P, X 7.81 198 322 153 Electrically Held & 14.88 14.12 7.56 T, N, R6 Mechanically Held 378 359 192 8.12 14.12 9.73 Mechanically Held Std., A3, C, C6, P, X 206 359 247 Std., A12, C, C6, F, Electrically Held 11.25 25.15 8.99 P, X, T 286 639 228 Std., F, X, T Mechanically Held Electrically Held N, R6, T, T10-T13,b 18.15 29.15 9.24 C6, N, R6, T, 461 740 235 Mechanically Held A3, C, T10-T13,b Std., A12, C, C6, F, Electrically Held 11.25 25.15 8.99 P, X 286 639 228 Mechanically Held Std., F, X Electrically Held b 18.15 29.15 9.24 461 740 235 Mechanically Held A3, C, C6, b Electrically Held N, R6, T, T10-T13 22.15 39.15 10.24 563 994 260 Mechanically Held N, R6, T, T10-T13 All Electrically and Mechanically Held Electrically and Mechanically Held Standard and All Forms Standard and All Forms 22.15 563 17.21 437 39.15 994 44.21 1123 10.24 260 12.83 326 All Electrically and Mechanically Held Standard and All Forms 20.21 513 65.75 1670 13.10 333 34.50 876 93.00 2362 23.50 597 SVG All 300 SXG 400 and 600 SYG & SZG 800 SJG 2–3 b Form(s) With or without any Forms C B Open Type S Table 16.204: NEMA 1 Flush Mounted Ampere Type Rating 30 30 60 100 LF LXF SMF SPF SQF Dimensions Form(s) Standard, F, Y48, R6 A3, A12, C, C6, T, P Electrically Std., A12, Held C, C6, P, X Mechanically Std., X Held Electrically T, N Held Mechanically A3, C, C6, Held T, N, P, R6 Electrically Std., A12, Held C, C6, P, X Mechanically Std., X Held Electrically T, N Held Mechanically A3, C, C6, Held T, N, P, R6 With or without any Forms H A 15.19 386 24.00 610 B 8.94 227 17.50 445 C 7.63 194 15.00 381 D 12.88 327 19.25 489 E F G 5.44 10.94 5.13 138 278 130 7.12 — — 181 13.44 341 7.19 183 5.88 149 11.13 283 4.75 121 24.00 610 17.50 445 15.00 381 19.25 489 5.75 146 15.19 386 8.94 227 7.63 194 12.88 327 5.44 10.94 5.13 138 278 130 24.00 610 17.50 445 15.00 381 19.25 489 5.75 146 — — 31.00 787 16.75 425 14.25 362 26.25 667 8.00 203 — — E F D B Enclosure — — G H All Type K Forms. A 9.19 4.50 233 114 C Saddle NEMA 1 Flush Mounted 16-72 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Approximate Dimensions Table 16.205: NEMA 3R Ampere Rating Type Number of Poles A B C D1 D2 E F G1 G2 H1 H2 J K L M N P K.O. X K.O. Y 30 SMH All 8.83 224 12.30 312 7.12 181 1.39 35 1.44 37 6.00 152 7.50 191 2.64 67 2.16 55 2.08 53 2.62 66 14.28 363 1.37 35 1.37 35 1.88 48 4.38 111 1.83 46 1/2 3/4 1 1/2 3/4 1 30 60 LH SPH All 9.83 250 16.30 414 8.62 219 1.39 35 1.44 37 7.00 178 11.50 292 2.64 67 2.16 55 2.08 53 2.62 66 16.78 426 1.31 33 1.75 44 2.13 54 4.88 124 1.83 46 1/2 3/4 100 SQH All 12.83 326 25.30 643 8.62 219 1.39 35 1.44 37 10.00 254 20.50 521 2.64 67 2.16 55 2.08 53 2.62 66 19.78 502 1.31 33 1.94 49 2.44 62 6.38 162 1.83 46 200 SVH All 12.83 326 40.30 1024 9.12 232 1.39 35 1.44 37 10.00 254 35.50 902 2.64 67 2.16 55 2.08 53 2.62 66 20.28 515 1.31 33 2.31 59 2.69 68 6.38 162 1.83 46 1 1 1/4 1 1/2 1 1 1/4 2 2 1/2 1 1 1/4 2 2 1/2 1/2 3/4 1/2 3/4 Table 16.206: NEMA 4 and 4X Stainless Steel Onlyc Ampere Rating 30 Type Number of Poles Standard, F, R6, Y48 LW LXW Any A3, A12, C, C6, P, T Electrically Held Mechanically Held 30 60 SMW 2–5 SPW 2–5 T Electrically Held Mechanically Held Electrically Held Mechanically Held Electrically Held Mechanically Held N, R6 A3, C, C6, T, N, P, R6 Std., A12, C, C6, P, X Std., A3, C, C6, P, X T, N, R6 A3, C, C6, T, N, P, R6 Std., A12, C, C6, F, N, R6, P, T, T10-13, X Std., A3, C, C6, F, N, P, R6, T, T10-13, X Std., A12, C, C6, F, P, b Std., A3, C, C6, P, b N, R6, T, T10-13 N, R6, T, T10-13 Standard and All Forms Standard and All Forms Standard and All Forms Electrically Held Mechanically Held SQW 200 SVW All 300 SXW All Electrically Held Mechanically Held Electrically Held Mechanically Held Electrically and Mechanically Held Electrically and Mechanically Held 400 & 600 SYW & SZW All Electrically and Mechanically Held 4&5 Bottom Hub Only Top & Bottom Hub A 8.13 206 12.62 321 B 7.88 200 7.81 198 C 16.19 411 14.69 373 D 1.56 40 2.56 65 E 5.00 127 7.50 191 F 15.00 381 13.50 343 G .60 15 .63 16 H 1.94 49 3.38 86 I 14.75 375 18.44 468 J 2.00 51 1.69 43 K 2.63 67 2.31 59 L .31 8 .31 8 W X 3/4" 1 1/2" 3/4" 1" 6.38 162 12.63 321 14.88 378 7.13 181 7.11 181 7.25 184 13.19 335 14.69 373 16.31 414 1.56 40 2.56 65 2.56 65 3.25 83 7.50 191 9.75 248 12.00 305 13.50 343 15.00 381 .63 16 .63 16 .63 16 1.19 30 3.19 81 3.19 81 11.81 300 18.50 470 20.88 530 1.63 41 1.64 42 2.06 52 2.31 59 2.31 59 2.63 67 .31 8 .31 8 .31 8 3/4" 1" 3/4" 1" 3/4" 1 1/2" 8.13 206 7.88 200 16.19 411 1.56 40 5.00 127 15.00 381 .60 15 1.94 49 14.75 375 2.00 51 2.63 67 .31 8 3/4" 1 1/2" 14.88 378 7.25 184 16.31 414 2.56 65 9.75 248 15.00 381 .63 16 3.88 98 20.88 530 2.06 52 2.63 67 .31 8 3/4" 1 1/2" 18.15 461 8.77 223 32.21 818 3.08 78 12.00 305 30.50 775 .61 15 3.67 93 26.71 678 2.58 66 3.19 81 .44 11 3/4" 2 1/2" 18.15 461 8.77 223 32.21 818 3.08 78 12.00 305 30.50 775 .61 15 3.67 93 26.71 678 2.58 66 3.19 81 .44 11 3/4" 2 1/2" 22.15 563 22.15 563 17.21 437 9.77 248 9.77 248 12.63 321 42.21 1072 42.21 1072 47.21 1199 3.08 78 3.08 78 4.11 104 16.00 406 16.00 406 9.00 229 40.50 1029 40.50 1029 46.00 1168 .61 15 .61 15 .61 15 3.67 93 3.67 93 4.59 117 31.71 805 31.71 805 28.32 719 2.33 59 2.33 59 3.11 79 2.88 73 2.88 73 5.75 146 .44 11 .44 11 .56 14 3/4" 2 1/2" 3/4" 2 1/2" 3/4" 3 1/2" 20.21 513 12.13 308 65.21 1656 4.11 104 12.00 305 64.00 1626 .61 15 4.59 117 30.82 783 2.67 68 4.50 114 .56 14 3/4" a Two 3"a 34.50 23.50 101.00 Floor Mounting 876 597 2565 X hub is 1/4" left of center. W hub shown is another X hub. K dimension is distance between two X hubs. Actual W hub is located 3-3/16" to the right of X hub shown. All “K” forms. For glass polyester (through 100A), see Size 2 NEMA 4/4X dimensions on page 16-24. 800 a b c Std., A12, C, C6, P, X Std., F, X Electrically Held 2&3 100 Dimensions for Stainless Steel Enclosures For Glass Polyester (through 100 A), see Size 2 NEMA 4/4X dimensions on page 16-24. Form(s) SJW 2–3 With or without any Forms A E D1 D2 D C A E D G B P N G1 F C F B NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS G G2 (4) L. Dia. Mtg. Holes (4) .36 Dia. Mtg. Holes (3) Closing Plates D30060-118-D C30054-260-A I W X J M M X J X Y H K L K NEMA 4 and 4X H1 H2 16 NEMA 3R © 2009 Schneider Electric All Rights Reserved 16-73 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Approximate Dimensions Table 16.207: NEMA 12/3R Ampere Rating 30 Type Number of Poles Standard, F, R6, Y48 LA LXA Any A3, A12, C, C6, P, T Electrically Held Mechanically Held 30 60 SMA 2-5 SPA Electrically Held Electrically Held Mechanically Held Electrically Held Mechanically Held Electrically Held Mechanically Held 2-5 Electrically Held 2&3 Mechanically Held 100 SQA 300 SXA All Electrically Held Mechanically Held Electrically Held Mechanically Held Electrically and Mechanically Held Electrically and Mechanically Held 400 & 600 SYA & SZA All Electrically and Mechanically Held 800 SJA 2-3 4&5 a b Dimensionsa Form(s) 200 SVA All Std., A12, C, C6, P, X Std., F, P, X T A 8.13 206 11.88 302 6.38 162 11.88 302 14.88 378 B 8.50 216 7.75 197 8.53 217 7.75 197 7.88 200 C 15.75 400 13.50 343 12.75 324 13.50 343 16.00 406 D 1.56 40 3.81 97 1.56 40 2.56 65 2.56 65 E 5.00 127 4.25 108 3.25 83 6.75 171 9.75 248 F 15.00 381 12.75 324 12.00 305 12.75 324 15.00 381 G .31 8 .38 10 .38 10 .38 10 .50 13 H 2.13 54 4.94 125 3.56 90 3.66 93 3.66 93 I 14.75 375 18.12 460 12.50 318 18.12 460 21.25 540 J .31 8 .31 8 .31 8 .31 8 .31 8 8.13 206 9.28 236 16.00 406 1.56 40 5.00 127 15.00 381 .50 13 3.66 93 15.38 391 .31 8 N, R6 A3, C, C6, T, N, P, R6 Std., A12, C, C6, P, X Std., A3, C, C6, P, X T, N, R6 A3, C, C6, T, N, P, R6 Std., A12, C, C6, F, N, R6, P, T, T10-13, X Std., A3, C, C6, F, N, P, R6, T, T10-13, X Std., A12, C, C6, F, N, P, b Std., A3, C, C6, P, b N, R6, T, T10-13, b N, R6, T, T10-13, b Standard and All Forms Standard and All Forms 14.88 378 7.88 200 15.75 400 2.56 65 9.75 248 15.00 381 .38 10 3.66 93 21.25 540 .31 8 18.15 461 9.24 235 31.50 800 3.08 78 12.00 305 30.50 775 .50 13 3.67 93 26.71 678 .44 11 22.15 563 22.15 563 17.21 437 10.24 260 10.24 260 13.33 339 41.50 1054 41.50 1054 47.00 1194 3.08 78 3.08 78 4.11 104 16.00 406 16.00 406 9.00 229 40.50 1029 40.50 1029 46.00 1168 .50 13 .50 13 .50 13 3.67 93 3.67 93 4.59 117 31.71 805 31.71 805 28.32 719 .44 11 .44 11 .56 14 Standard and All Forms 20.21 513 13.00 330 65.00 1651 4.11 104 12.00 305 64.00 1626 .50 13 5.31 135 30.87 784 .69 18 93.00 2362 34.50 876 23.50 597 With or without any Forms Floor Mounting See Figure 1 for all dimensions except 800 A; for 800 A dimensions, see Figure 2. All Type “K” Forms using Class 9001 Type K Control Units. Table 16.208: NIGHT-MASTER® Outdoor Lighting Contactors (Short Version)—NEMA 3R Ampere Rating Description 30 Disconnect Switch & Circuit Breaker Types Disconnect Switch & Circuit Breaker Types Disconnect Switch & Circuit Breaker Types Disconnect Switch Type Circuit Breaker Type 60 100 200 Type Number SMC61, 62 & 81 SPC61, 62 & 81 SQC61, 62 & 81 SVC61 & 62 SVC81 A B C D E F G H Jc K L M 23.50 597 15.00 381 8.42 214 10.50 267 19.00 483 22.38 568 7.00 178 2.18 55 1.50 38 2.13 54 2.13 54 34.53 877 48.37 1229 20.00 508 19.00 483 8.42 214 9.12 232 10.50 267 10.53 267 30.04 763 44.00 1118 33.41 849 47.25 1200 7.00 178 7.00 178 2.18 55 2.18 55 2.0 51 2.50 64 2.68 68 2.68 68 Knockouts N P Q 2.13 54 .50– .75 1.–1.25 1.50 .50– .75 2.68 68 2.68 68 3.44 87 3.44 87 .50– .75 .50– .75 1.–1.25 2.-2.50 1.–1.25 2.–2.50 1.–1.25 1.5-2.0 1.–1.25 1.5–2.0 Table 16.209: NIGHT-MASTER® Outdoor Lighting Contactors (Long Version)—NEMA 3R Ampere Rating Description Type Number Disconnect Switch & Circuit Breaker Types Disconnect Switch & Circuit 60 Breaker Types Disconnect Switch & Circuit 100 Breaker Types Disconnect Switch Type 200 Circuit Breaker Type c Conduit size. 30 16 D A E SMC63, 64 & 83 SPC63, 64 & 83 SQC63, 64 & 83 SVC63 & 64 SVC83 A B C D E F G H Jc K L M 38.88 987 15.00 381 8.42 214 10.42 265 34.38 873 37.76 959 7.00 178 2.18 55 1.50 38 2.13 54 2.13 54 42.53 1080 56.37 1432 20.00 508 19.00 483 8.42 214 9.12 232 10.42 265 10.53 267 38.04 966 52.00 1321 41.41 1052 55.25 1403 7.00 178 7.00 178 2.18 55 2.18 55 2.0 51 2.50 64 2.68 68 2.68 68 2.68 68 2.69 68 P Q 2.13 54 .50– .75 1.–1.25 1.50 .50– .75 3.44 87 3.44 87 .50– .75 .50– .75 1.–1.25 2.–2.50 1.–1.25 2.–2.50 1.–1.25 1.5–2.0 1.–1.25 1.5–2.0 (4) .44 Dia. Mtg. Holes 11 G D Knockouts N D G NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS F H J C B C E F A B G (4) J Dia. Mtg. Holes A I B K L M C N H Figure 1: NEMA 12 (30–600 A) 16-74 Figure 2: NEMA 12 (800 A) P Q Figure 3: NIGHT-MASTER © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Lighting Contactors Class 8903 / Refer to Catalog 8903CT9701R8/08 www.schneider-electric.us Approximate Dimensions A D Table 16.210: Combination Lighting Contactors—NEMA 1 Enclosure Ampere Rating Dimensionsa (see Figure 1) Type SMG6– & 8– SMG7– & 9– 13.75 23.00 349 584 8.36 10.63 21.00 20.07 1.87 212 270 533 510 47 1.88 48 3.76 96 2.06 52 1.06 27 3.25 83 2.18 55 1.25 32 .87 22 SPG6– & 8– 10.50 26.00 267 660 15.00 28.75 381 730 9.62 7.37 24.00 17.00 2.12 2.00 244 187 610 432 54 51 9.62 11.62 26.25 21.50 2.18 2.00 244 295 667 546 55 51 4.00 102 4.00 102 2.06 52 2.56 65 1.06 27 1.31 33 3.25 83 3.25 83 2.18 55 2.18 55 1.25 32 1.25 32 .87 22 .87 22 30 60 SPG7– & 9– B 22.50 572 C 8.37 213 D 6.38 162 Top & Bot. A 9.50 241 E F G 20.50 14.68 1.81 521 373 46 H 1.69 43 I 3.37 86 J 3.38 86 K 1.06 27 L 3.25 83 M 2.18 55 N 1.25 32 O .87 22 W .50.75 .50.751.0 1.01.25 1.01.25 X .50.75 .50.751.0 .50.75 .50.75 Handle Swing L M C N K Y Sides Y O E B .50 Y .50 (4) .31 Dia. Mtg. Holes 8 (For Sizes 30 & 60 A) Cover Open 90 .50 .50 F W X W G J H I Figure 1 NEMA 1 Enclosure Combination Devices Table 16.211: NEMA 1 Enclosure Ampere Rating Type 100 SQG6– & 7– SQG81 & 91 SVG6– & 7– SVG81 & 91 200 SXG6– & 7– 200 SXG81 & 91 400 600 SYG81 & 91 SZG81 & 91 Dimensionsa (see Figure 2) A 15.25 387 16.00 406 20.00 508 20.00 508 36.00 914 B 39.50 1003 50.00 1270 75.00 1905 63.00 1600 90.00 2286 Top & Bot. C D E F G H I J K 10.60 9.25 3.00 22.68 41.00 2.69 5.38 2.83 3.74 269 235 76 576 1041 68 137 72 95 10.68 10.00 3.00 23.68 51.50 2.69 5.38 2.83 3.74 271 254 76 601 1308 68 137 72 95 14.37 12.00 4.00 29.43 77.00 3.19 — 3.52 7.00 365 305 102 748 1956 81 89 178 14.37 12.00 4.00 27.43 65.00 3.19 — 3.52 7.00 365 305 102 697 1651 81 89 178 17.00 Floor Mounting Enclosure 432 L 5.00 127 5.00 127 9.25 235 5.00 127 M N 1.21 31 1.21 31 — — O .90 23 .90 23 W 1.-1.25 2.-2.50 — — — — — — Sides X .50.75 .50.75 .50 .50.75 .50.75 3.00 — 3.00 — — — — 2.50 Handle Swing L Y A D .50 E C N Y G O B Y Cover Open 90 (4) .44 Dia. Mtg. Holes 11 (For Sizes 100 & 200 A) (4) .56 Dia. Mtg. Holes Located on 14 External Flanges (For Size 300 A) F W X W J K H Table 16.212: NEMA 4 & 4X Enclosure Ampere Rating Type SMW6–& 8– 30 SMW7– & 9– SPW6– & 8– 60 SPW7– & 9– 100 200 SQW6– & 7– SQW81 & 91 SVW6– & 7– SVW81 & 91 SXW6– & 7– 300 SXW81 & 91 400 600 SYW81 & 91 SZW81 & 91 Figure 2 NEMA 1 Enclosure Dimensionsa (see Figure 3) A 9.50 241 13.75 349 10.50 267 15.00 381 15.25 387 16.00 406 20.00 508 20.00 508 36.00 914 B 8.36 212 8.36 212 9.61 244 9.61 244 10.60 269 10.56 268 14.21 361 14.21 361 17.71 450 C 24.76 629 25.26 642 28.26 718 31.01 788 41.76 1061 52.26 1327 78.12 1984 66.12 1679 98.00 2489 D 3.25 83 3.25 83 3.25 83 3.25 83 5.00 127 5.00 127 9.25 235 5.00 127 E 2.50 64 4.75 121 2.50 64 5.38 137 2.50 64 2.50 64 4.00 102 4.00 102 F 4.50 114 4.25 108 5.50 140 4.25 108 10.25 260 11.00 279 12.00 305 12.00 305 G 23.50 597 24.00 610 27.00 686 29.75 756 40.50 1029 51.00 1295 77.00 1956 65.00 1651 H .63 16 .63 16 .63 16 .63 16 .63 16 .63 16 .56 14 .56 14 I 3.00 76 5.25 133 3.00 76 5.88 149 3.24 82 3.24 82 4.77 121 4.77 121 I J 1.62 41 1.62 41 2.00 51 2.00 51 2.61 66 2.61 66 2.96 75 2.96 75 K 2.31 59 2.31 59 2.63 67 2.63 67 3.19 81 3.19 81 3.50 89 3.50 89 L 14.31 363 20.14 512 16.56 421 21.06 535 22.18 563 23.00 584 29.43 748 27.43 697 Floor Mounting Enclosure W X .75 Hub 1.0 Hub .75 Hub 1.0 Hub .75 Hub 1.50 Hub .75 Hub 1.50 Hub .75 Hub 2.50 Hub .75 Hub 2.50 Hub .75 Hub 3.50 Hub .75 Hub 3.50 Hub — — Handle Swing D A F E B H G C Cover Open 90º (4) .31 Dia. Mtg. Holes 8 (For Sizes 30 & 60 A) (4) .44 Dia. Mtg. Holes 11 (For Sizes 100 & 200 A) (4) .56 Dia. Mtg. Holes Located on 14 External Flanges (For Size 300 A) L W X J I K Figure 3 NEMA 4 & 4X Enclosure Table 16.213: NEMA 12/3R Enclosure Type SMA6– & 8– 30 SMA7– & 9– SPA6– & 8– 60 SPA7– & 9– 100 200 SQA6– & 7– SQA81 & 91 SVA6– & 7– SVA81 & 91 SXA6– & 7– 300 SXA81 & 91 A F Dimensionsa (see Figure 4) A 9.50 241 13.75 349 10.50 267 15.00 381 15.25 387 16.00 406 20.00 508 20.00 508 36.00 914 B 8.36 212 10.10 257 9.61 244 10.98 279 10.59 269 10.52 267 14.21 361 14.21 361 17.71 450 C 24.26 616 24.76 629 27.76 705 30.51 775 42.00 1067 52.50 1334 78.00 1981 66.00 1676 90.00 2286 D 3.25 83 3.25 83 3.25 83 3.25 83 5.00 127 5.00 127 9.25 235 5.00 127 E 2.50 64 4.75 121 2.50 64 5.38 137 3.00 76 3.00 76 4.00 102 4.00 102 F 4.50 114 4.25 108 5.50 140 4.25 108 9.25 235 10.00 254 12.00 305 12.00 305 G 23.50 597 24.00 610 27.00 686 29.75 756 41.00 1041 51.50 1308 77.00 1956 65.00 1651 H .38 10 .38 10 .38 10 .38 10 .50 13 .50 13 .50 13 .50 13 I 3.25 83 5.50 140 3.25 83 6.13 156 3.75 95 3.75 95 7.75 197 7.75 197 J 14.31 363 22.00 559 16.56 421 23.43 595 22.31 567 23.00 584 29.43 748 27.43 697 B H G C Cover Open 90º (4) .31 Dia. Mtg. Holes 8 (For Sizes 30 & 60 A) (4) .44 Dia. Mtg. Holes 11 (For Sizes 100 & 200 A) (4) .56 Dia. Mtg. Holes Located on 14 External Flanges (For Size 300 A) L I Figure 4 NEMA 12/3R Enclosure 16 400 SYA81 & 91 Floor Mounting Enclosure 600 SZA81 & 91 a Dimensions are the same for Form F4T (standard control transformer), Form F4T11 (100 VA extra capacity) and Form F4T12 (200 VA extra capacity). Handle Swing D E NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Ampere Rating © 2009 Schneider Electric All Rights Reserved 16-75 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Contactors Types DP, DPA, and SYD Class 8910 / Refer to Catalog 8910CT9301 www.schneider-electric.us • • • • • • Compact Design Industry Standard Mounting Double Break Contacts Low Coil VA Straight-Through Wiring Low Cost Definite purpose contactors are ideal for heating, air conditioning, refrigeration, data processing, and food service equipment. New compact 1 and 2-Pole contactors are available along with standard size 2, 3, and 4-Pole devices. They feature quick connect terminals and binder head screws for easy wiring. Box lugs are standard on 40 ampere contactors and larger. An exclusive DIN track mounting option may reduce installation costs. Coils can be changed on the Type DPA contactors quickly without a tool. Auxiliary contact modules snap on either side of the Type DPA contactors. Table 16.214: Compact 1-Pole Contactors—600 Vac Maximum Type DP31V02 1-Pole Locked Rotor Amperes Full Load Amperes 277 V 460 V 575 V Resistive Load Amperes 20 25 30 40 100 125 150 240 100 125 150 200 80 100 120 160 25 30 40 50a Horsepower Ratings 115 V 1Ø 1 2 2 2 230 V 1Ø 2 3 3 5 N.O. Poles Type 1 1 1 1 DP11d DP21d DP31d DP41d 32.80 38.20 45.90 54.00 N.O. Poles Type $ Price 2 2 2 2 DP12d DP22d DP32d DP42d 38.20 50.00 55.00 65.00 N.O. Poles Type $ Price 2 3 4 2 3 4 2 3 4 2 3 4 2 3 2 3 2 3 2 3 2 3 3 3 3 DPA12d DPA13d DPA14d DPA22d DPA23d DPA24d DPA32d DPA33d DPA34d DPA42d DPA43d DPA44d DPA52d DPA53d DPA62d DPA63d DPA72d DPA73d DPA92d DPA93d DPA122d DPA123d SYD138d SYD230d SYD368d 53.00 61.00 76.00 58.00 67.00 86.00 71.00 75.00 99.00 79.00 88.00 114.00 164.00 174.00 185.00 193.00 221.00 247.00 286.00 311.00 352.00 382.00 703.00 1327.00 2744.00 $ Price Table 16.215: Compact 2-Pole Contactors—600 Vac Maximumb Locked Rotor Amperes Full Load Amperes 277 V 460 V 575 V Resistive Load Amperes 20 25 30 40 100 125 150 240 100 125 150 200 80 100 120 160 30 35 40 50 Horsepower Ratings 115 V 1Ø 1 2 2 2 230 V 1Ø 2 3 5 5 Type DP32V02 2-Pole Table 16.216: 2, 3, and 4-Pole Contactors—600 Vac Maximumbc 230 V 460 V 575 V 20 120 100 80 25 150 125 30 180 40 Type DPA33V02 3-Pole 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS a b c d 16-76 Locked Rotor Amperes Full Load Amperes Resistive Load Amperes Horsepower Ratings 115 V 1Ø 230 V 1Ø 230 V 3Ø 460/575 V 3Ø 25 1 2 5 7-1/2 100 35 2 3 7-1/2 10 150 120 40 2 5 10 15 240 200 160 50 3 7-1/2 10 20 50 300 250 200 65 3 10 15 30 60 360 300 240 75 5 10 25 30 75 450 375 300 94 5 15 25 40 90 540 450 360 120 7-1/2 20 30 50 120 720 600 480 120 10 25 40 75 — — — — — — — — — 132 800 800 520 132 — 220 1500 1500 1200 220 — 352 2200 2200 1800 352 — 50 A Resistive, maximum 277 V. All others rated 40 A Resistive (above 277 V). Above 240 V, all lines must be switched. See page 16-116 for replacement contacts. Voltage code must be specified to order this product. Refer to standard voltage codes listed below. CP1B Discount Schedule Table 16.217: Coil Voltage Codes Voltage Code Code Type DP, DPA Type DPA122, DPA123, SYD 60 Hz 50 Hz 24 24 V14 V12e 24 — — V01f 120 110 V02 V02 208 — — V08 208-240 220 V09 — 230-240 220 — V03 277 — V04 V04 480 440 V06g V06 600 550 V07h V07 e 24 V 50 Hz only. f Available on Types DPA122, DPA123, and SYD138 only. g Not available for Type DP11 through DP31 single-pole devices. h Not available for Type DP one- and two-pole devices. © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Contactors Class 8910 / Refer to Catalog 8910CT9301 www.schneider-electric.us Types DP, DPA, and SYD Application Data Table 16.218: 2 Normally Open & 2 Normally Closed 4-Pole Contactors—600 Vac Maximum Table 16.223: Terminals Full Resistive Class 8910 N.O. N.C. Load Load $ Price Poles Polesb Type Form Amperes Amperes 20 25 2 2 DPA14a Y392 148.00 25 35 2 2 DPA24a Y392 159.00 30 40 2 2 DPA34a Y392 171.00 40 50 2 2 DPA44a Y392 186.00 a Voltage code must be specified to order this product. Refer to standard voltage codes on page 16-88. b Above 240 volts, all lines must be switched. Note: N.C. poles on outside. N.C. poles open before N.O. poles close. g Type of Lug 20–30 A Binder Head 40 A Box Lug 50–60 A Box Lug 75–90 A Box Lug 120 A Box Lug 132 A Box Lug 220 A Box Lug 352 A Box Lug Solid or stranded copper wire only. DPA DPA122 DPA123 SYD Contact Arrangement Class 9999 Type 1 N.O. 1 N.C. 1 N.O. & 1 N.C. 2 N.O. 1 N.O. 1 N.C. 1 N.O. & 1 N.C. D10 D01 D11 D20 SX6 SX7 SX8 c Full Load Amperes 20–40 20–40 50 DPA 20–40 DPA 60–75 DPA 90–120 SYD 132 SYD 220 CP1 discount schedule. Poles 1&2 2&3 2&3 4 2&3 2&3 2&3 2&3 Class 9999 Type DMB1 DPC1 Description $ Price 16.40 16.40 29.50 29.50 57.00 57.00 77.00 Table 16.220: NEMA 1 General Purpose Enclosures for Type DP, DPA and SYD Contactors Class 8910 Type DP DPA Wire Rangeg #14–#8 #14–#6 #14–#2 #14–#I/O #14–#I/O #8–350 MCM #8–350 MCM #4–500 MCM Table 16.224: Miscellaneous Parts Table 16.219: Auxiliary Contacts, 5 A, 600 Vac Rated For Use With Class 8910 Type Power Terminals Full Load Amperes DIN mounting bracket attachment (Type DPA, 20 A to 60 A only) Type DP Series B Cover $ Price c 78.00 78.00 DPG2 99.00 DPG3 DPG4 DPG5 DPG6 143.00 287.00 464.00 464.00 7.70 2.10 Table 16.225: Factory Modifications Auxiliary contacts can be factory installed along with a DIN mounting bracket option. Special terminations are also available. Modification Factory installed auxiliary contacts Pressure wire connectors (20–30 A) Box lugs (20–30 A) Class 9991 Type DPG1 DPG1 $ Price Cu/Al box lugs (20–40 A) Cu/Al box lugs (20, 25 & 30 A) DIN mounting bracket attached (35 mm style)i Contact cover for Type DP Series B UL Listed label on device h i Type — DPA DP DPA DPA DP DP DPA — DP Form h Y122 $ Price h 1.70 per pole Y124 3.30 per pole Y239 Y239 3.30 per pole 3.30 per pole 3.30 8.70 2.10 No Charge Y135 Y248 U1 Contact your nearest Square D/Schneider Electric sales office. Available for 20 through 60 A only. Contactor Table 16.221: Application Data Mechanical Life: 500,000 operations Electrical Life: Type DP 100,000 operations Type DPA, SYD 200,000 operations Duty Cycle: Continuous Approvals: UL Component Recognized UL Listed (Form U1) File E78351, CCN NLDX2 CSA Certified File E78351, CCN NLDX DPA is CE marked File LR25490, Class 321104 Note: See page 16-116 for replacement contacts. Bottom Tabs Top Hooks Operating Tab Coil Replacement No tools required Table 16.226: Type DPA Coil Voltage Codes Table 16.222: Class 8910 Type DPA Replacement Coils Volt-Amperese $ Pricef Inrush Sealed 20–40 A 2&3 DA1d 56 6 68.00 20–40 A 4 DA2d 109 10 92.00 50–60 A 2&3 DA2d 109 10 92.00 75–90 A 2&3 DA3d 214 19 114.00 d Replace diamond with suffix from DPA Coil Table 16.226. Example: Coil for Class 8910 DPA33V02 120 V 60 Hz would be a Class 9998 Type DA1V02. e For Types DP11 through DP32: Inrush 30 VA; Sealed 5 VA. f CP10 Discount Schedule, not CP1. Note: See page 16-133 for DPA12_ and SYD Replacement Coils. Poles Class 9998 Type j Voltage, 50 Hz 24 120 208–240 277 480 600 24 110 220 — 440 550 Voltage Code V14 V02 V09 V04 V06j V07j Available for Type DPA contactors only. 16 Full Load Amperes Voltage, 60 Hz NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Auxiliary Contact Installation © 2009 Schneider Electric All Rights Reserved CP1B CP1 CP10 Discount Schedule 16-77 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Contactors Types DP, DPA and SYD Approximate Dimensions Class 8910 / Refer to Catalog 8910CT9301 www.schneider-electric.us 2.16 2.16 55 55 .83 21 21 1.63 3.29 42 59 1.63 2.31 2.87 84 Type DP—2-Pole 20 through 40 Full Load Amperes 2.50 3.17 64 .50 1.50 .25 81 51 6 .46 2.25 .25 .81 1.55 12 3.12 79 38 13 4.00 3.25 3.75 102 83 95 3.11 57 21 6 6 79 39 4.00 3.25 Type DPA—4-Pole 20 through 40 Full Load Amperes .51 13 2.11 1.54 39 3.27 .23 6 .07 2 .09 4.06 3.72 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 2.56 65 2.87 .44 2.50 11 73 3.67 93 6 .26 .06 7 2 4.63 5.20 64 4.44 113 118 94 .24 Provisions for (4) #10 or M5 Mounting Screws Type DPA—2 and 3-Pole 50 and 60 Full Load Amperes 16-78 2 103 83 .26 7 54 95 Provisions for (4) #10 or M5 Mounting Screws Type DPA—2 and 3-Pole 20 through 40 Full Load Amperes 6 3.75 102 83 Provisions for (4) #10 or M5 Mounting Screws .23 73 84 Provisions for (4) #10 or M5 Mounting Screws Type DP—1-Pole 20 through 40 Full Load Amperes 2.00 2.87 3.29 42 59 73 Provisions for (4) #10 or M5 Mounting Screws .25 57 7 .83 2.31 2.22 .27 42 57 7 42 1.63 2.22 .27 1.63 3.39 86 5.12 132 130 4.37 Provisions for #10 or M5 Mounting Screws 111 .39 10 Type DPA—2 and 3-Pole 75 and 90 Full Load Amperes © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Contactors Types DP, DPA and SYD Approximate Dimensions Class 8910 / Refer to Catalog 8910CT9301 www.schneider-electric.us 8.00 203 5.31 5.38 137 1.72 4.75 .31 1.50 .31 121 8 38 8 135 44 6.50 .12 6.03 153 2.73 165 3 69 6.63 168 6.86 7.01 178 174 13.11 333 Provision for 1/4" Mounting Screw Type DPA 120 Full Load Amperes Provision for 5/16" Mounting Screw 6.50 165 Type SYD230 220 Full Load Amperes 5.45 .53 13 1.86 138 .53 47 13 4.75 121 1.50 38 2.69 68 8.74 222 4.10 104 6.03 153 12.00 305 19.33 491 11.12 282 Provision for 1/2" Mounting Screw Provision for 1/4" Mounting Screw 1.12 28 2.50 64 7.25 165 T1 T2 T3 184 .12 3 9.50 241 Type SYD368 352 Full Load Amperes NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 6.50 16 Type SYD138 132 Full Load Amperes © 2009 Schneider Electric All Rights Reserved 16-79 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Starters Types DPS and H through M Class 8911 / Refer to Catalog 8910CT9301 www.schneider-electric.us Class 8911 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. Definite purpose starters offer: • • • • • • Low cost Small size Melting alloy overload block Trip-free reset mechanism Open type or enclosed 500,000 mechanical operations Table 16.227: 2- and 3-Pole Starters—600 Vac Maximum No. of Poles Full Load Amperes Compact 2-Pole Single Phase 230 V 3Ø 460/575 V 3Ø 230 V 460 V 575 V Typeb 20 25 30 1 2 2 2 3 5 — — — — — — 120 150 180 100 125 150 80 100 120 DSO12c DSO22c DSO32c 260.00 284.00 320.00 DSG12c DSG22c DSG32c 318.00 342.00 381.00 1 2-Pole Single Phase 20 25 30 40 50 1 2 2 3 3 2 3 5 7 1/2 10 — — — — — — — — — — 120 150 180 240 300 100 125 150 200 250 80 100 120 160 200 DPSO12c DPSO22c DPSO32c DPSO42c DPSO52c 270.00 296.00 333.00 365.00 482.00 DPSG12c DPSG22c DPSG32c DPSG42c DPSG52c 332.00 354.00 392.00 426.00 539.00 1 3-Pole PolyPhase 20 25 30 40 50 60 75 90 1 2 2 3 3 5 5 7 1/2 2 3 5 7 1/2 10 10 15 20 3 7 1/2 10 10 15 25 25 30 5 10 15 20 30 30 40 50 120 150 180 240 300 360 450 540 100 125 150 200 250 300 375 450 80 100 120 160 200 240 300 360 DPSO13c DPSO23c DPSO33c DPSO43c DPSO53c DPSO63c DPSO73c DPSO93c 297.00 320.00 363.00 399.00 638.00 680.00 809.00 1092.00 DPSG13c DPSG23c DPSG33c DPSG43c DPSG53c DPSG63c DPSG73c DPSG93c 356.00 381.00 423.00 459.00 696.00 797.00 926.00 1211.00 3 b c 3.50 89 1.60 41 4.00 102 7.00 178 6.20 157 Reset d Provisions for (3) #10 or M5 Mounting Screws Type DPSO—2 and 3-Pole and DSO 20–50 Full Load Amperes 6.00 152 3.00 76 Prices do not include thermal units. Standard trip thermal units are priced at $14.30 each. See page 16-125 for selection information. Holding circuit contacts are not provided as standard; refer to table below for kit. Voltage code must be specified to order this product. Refer to standard voltage codes listed below. Table 16.228: Cross Reference Existing/Replacement Class 8911 0.5 13 1.50 38 .88 22 No. of Thermal Unitsa 230 V 1Ø a Approximate Dimensions NEMA 1 Enclosed Open Type 115 V 1Ø Type DPSO23V02 Type DPSG23V02 Locked Rotor Amperes Horsepower Ratings Existing Device Replacement Device HO33 DPSO13 HG33 DPSG13 JO33 DPSO23 JG33 DPSG23 KO33 DPSO33 KG33 DPSG33 KO43 d KG43 d LO33 DPSO43 LG33 DPSG43 MO33 DPSO53 MG33 DPSG53 MO43 d MG43 d Type DPS 4-Pole starter not available. Suggest 3-Pole device with auxiliary contact. $ Pricea Typeb $ Pricea Table 16.230: Class 8911 Type DPS Replacement Parts Volt Amperes $ Priceg Inrush Sealed 20–40 A 2&3 DA1h 56 6 68.00 50 A 2&3 DA2h 109 10 92.00 60–90 A 2&3 DA3h 214 19 114.00 See page 16-116 for replacement contacts for DPS devices. g CP10 Discount Schedule, not CP1. h Replace with Voltage Code from the Coil Table shown below. Full Load Amperes Class 9998 Type Poles Table 16.231: Coil Voltage Codes Voltage, 60 Hz Voltage, 50 Hz 24 120 208–240 277 480 600 24 110 220 — 440 550 Voltage Code V14 V02 V09 V04 V06 V07 Table 16.232: Auxiliary Contacts For Type DPS Startersi Table 16.229: Miscellaneous Parts and Kits Description Class & Type $ Price Start-Stop push button kitef 8911DPB1 134.00 Hand-Off-Auto selector switch kite 8911DSS1 134.00 Standard N.C. overload relay contact 9998SO1 42.80 N.C. and N.O. isolated overload relay 9999SO4 116.00 alarm contacts Overload relay jumper strap 9998SO31 14.30 e Use for 20 to 40 A starters. For 50 A starters, use the 9999BLX bracket. f Does not include holding circuit interlock—order auxiliary contact. i j Description Class 9999 Type $ Price j 1 N.O. D10 16.40 1 N.C. D01 16.40 1 N.O./1 N.C. D11 29.50 2 N.O. D20 29.50 Auxiliary contacts are available factory installed. Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). CP1B discount schedule. Table 16.233: Ratings—Overload Contacts and Auxiliary Contacts 16 8.13 207 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Reset .94 24 4.13 105 .94 24 1.00 25 Type DPSG—2 and 3-Pole 20–40 Full Load Amperes 16-80 Pilot Duty – AC Only (35% Power Factor) Volts AC Device 10.00 254 9998 SO1 9999 SO4 9999 R20 & R21 9999 D10, D01, D11 & D20 120 or Less Make 30 A Carry & Break 3A 120–600 3600 VA 360 VA Continuous Current Rating 5A 5A Table 16.234: How to Order • • • • To Order Specify: Class Number Type Number Voltage Code Form(s) Catalog Number Coil Voltage Code Class Type 8911 DPSG33 CP1 CP1B Form(s) V02 CP10 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WELL-GUARD Control™ Pump Panels Full Voltage Type Class 8940 / Refer to Catalog 8940CT9701R7/08 www.schneider-electric.us Class 8940 panels in NEMA 3R enclosures are specifically designed for pumping applications. Featuring IEC Style contactors and overload relays. • Approved for submersible pump applications • Class 10 overload relay through 100 hp—480 V, 50 hp—240 V • Adjustable trip current • All prices include a START push button and a HANDOFF-AUTO selector switch. Extra space is provided for field installation of auxiliary equipment. • • • • Ambient temperature compensated overload Phase failure sensitive through 100 hp—480 V, 50 hp—240 V Sizes closely matched to common motor sizes All devices are UL Listed, and marked “SUITABLE ONLY FOR USE AS SERVICE EQUIPMENT” Table 16.235: 3-Pole Polyphase—480 Vac Maximum (50–60 Hz) Max. Hp Polyphase 3 5 7-1/2 10 15 Volts Coil Voltage 240–60 220–50 240 20 25 30 40 50 3 5 7-1/2 10 15 Type NPF4030 20 25 30 40 50 480 a b c 480–60 440–50 60 75 100 Circuit breaker disconnect supplied. Fuse clips are sized for use with dual-element time-delay fuses. Coil voltage code must be specified to order this product. Refer to standard voltage codes listed below. Table 16.236: Coil Voltage Codes d Type NPG4050 e Voltage Code $ Price Adder 60 Hz 50 Hz 240 220 V03 N/C 480 440 V06 N/C 24 V coils are not available on Size 4 starters. On Size 1–3, 24 V coils are available. Form S must be used. Form S required for separate control. Table 16.237: AC Operated Devices with Control Power Transformers Voltage Code 60 Hz (Primary-Secondary) 240-120 480-120 Type $ Price NPD2003c NPE2005c NPE2007c NPF2010c NPF2015c 1881.00 1881.00 1881.00 2208.00 2537.00 100 100 100 200 200 30 30 30 30 30 NPG2020c NPG2025c NPJ2030c NPJ2040c NPJ2050c NPD4003c NPD4005c NPD4007c NPE4010c NPE4015c 3618.00 4082.00 4082.00 6591.00 7520.00 1881.00 1881.00 1881.00 1881.00 2208.00 60 60 60 100 100 NPF4020c NPF4025c NPF4030c NPG4040c NPG4050c 2537.00 2537.00 3681.00 4082.00 4082.00 100 200 200 NPJ4060c NPJ4075c NPJ4100c 6651.00 6651.00 7520.00 Table 16.238: Class 8940 Electrical Interlock Disconnect Switches SPDT 30 A ElK1f 60 A ElK1f 100 A 9999TC10 200 A 9999R39 400 A 9999R35 Circuit Breakers GJL N/A FAL 9999R26 KAL 9999R26 LAL 9999R26 MAL 9999R26 f No Class Number required. DPDT ElK2f ElK2f 9999TC20 9999R40 9999R36 N/A 9999R27 9999R27 9999R27 9999R27 For How to Order Information, see page 16-12. 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS V80 V81 Fuse Clip Amperesb 30 30 30 60 60 © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-81 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WELL-GUARD Control™ Pump Panels Full Voltage Type, Type NS, SS, XS Class 8940 / Refer to Catalog 8940CT9701R7/08 www.schneider-electric.us NOTE: Motor Logic™SSOLR are designed to protect 50/60 hertz three-phase AC motors from overload and phase loss conditions. Open Delta systems or grounded B-phase systems are difficult to balance and could cause the Motor Logic SSOLR to trip. For applications of this nature, it is recommended that bi-metallic overload relays (Form B12) be used. Class 8940 Type NS, SS, and XS panels in NEMA 3R enclosures are specifically designed for pumping applications. Extra space is provided for field installation of auxiliary equipment. • Type S Contactor provided as standard • Approved for submersible pump applications • Class 10 Motor Logic™ SSOLR through 200 hp–480 V, 100 hp–240 V, Type SS only (Includes rubber boot.) • All prices include a START push button and a HAND-OFF-AUTO selector switch • Adjustable trip current • Phase failure sensitive through 200 hp–480 V, 100 hp–240 V, Type SS only • Ambient temperature compensated overload • All devices are UL Listed, and marked “SUITABLE ONLY FOR USE AS SERVICE EQUIPMENT” NOTE: Class 10 Motor Logic SSOLR does not protect for phase imbalance. Table 16.239: 3-Pole Polyphase—480 Vac Maximum (50–60 Hz)—Fusible or Thermal Magnetic Breakera Volts 240 Type SSD4030 480 Maximum Hp Polyphase 3, 5, 7-1/2 10, 15 20, 25, 30 40, 50 75 100 100 200 250 300 3, 5, 7-1/2, 10 15, 20, 25 30 40, 50 60, 75, 100 150 200 200 300 350 400 500 600 Coil Voltage 240–60 220–50 480–60 440–50 Fuse Clip Amperesc 30 60 100 200 LAL36250e 400 LAL36350e MAL36700e MAL36800e MAL361000e 30 60 60 100 200 LAL36250e 400 LAL36350e MAL36500e MAL36600e MAL36700e MAL36800e MAL361000e Type $ Price SSC2007d SSD2015d SSE2030d SSF2050d XSG2075b SSG2100d XSG2100b XSH2200b XSJ2250b XSJ2300b SSC4010d SSD4025d SSD4030d SSE4050d SSF4100d XSG4150b SSG4200d XSG4200b XSH4300b XSH4350b XSH4400b XSJ4500b XSJ4600b 2003.00 2480.00 4194.00 7718.00 19890.00 16286.00 19890.00 43133.00 58145.00 58145.00 2003.00 2480.00 3338.00 4194.00 7718.00 19890.00 16286.00 19890.00 43133.00 43133.00 43133.00 58145.00 58145.00 Table 16.240: 3-Pole Polyphase—480 Vac Maximum (50–60 Hz)—Circuit Breaker (Mag-Gard®) Max. Hp Coil Circuit Type $ Price Polyphase Voltageb Breakerf 25 XSE2025V03 4599.00 FAL3610018M 30 XSE2030V03 4599.00 240–60 240 220–50 40 KAL3625026M XSE2040V03 7650.00 50 KAL3625029M XSF2050V03 8258.00 40 XSE4040V06 4599.00 FAL3610018M 50 XSE4050V06 4599.00 480–60 480 60 XSE4060V06 7334.00 440–50 KAL3625025M 75 XSE4075V06 7650.00 100 KAL3625029M XSF4100V06 8258.00 To substitute an IEC ambient compensated bimetallic overload relay (up to size 5) for the Motor Logic SSOLR, request Form B12 and state motor hp (no charge). This applies to the above (SSx) devices only. See page 16-81 for coil voltage codes and pricing. Fuse clips are sized for use with dual-element time-delay fuses. Voltage code not required for 240 V or 480 V common control with 8940SS controllers. Circuit breaker disconnect supplied. (See page 7-32 for circuit breaker adjustment range.) See page 7-32 for circuit breaker adjustment range. Volts Type SSE4050 a b c d e f Table 16.243: Class 8940—UL Listed Short Circuit Ratings Table 16.241: Class 8940—UL Listed Short Circuit Ratings Thermal Magnetic Circuit Breaker Type 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS g NEMA Available Amperes Voltage Enclosure Size RMS Symmetrical 0-3 600 Standard 5,000 4&5 600 Standard 10,000 6 600 Standard 18,000 7 0-480 Standard 30,000 7 481-600 Standard 22,000 Standard enclosure includes non-oversize NEMAs 1, 4 & 4X Stainless, and 12. NEMA Size NEMA Fuse Class Enclosure 0–3 0–3 0–2 0–2 4–5 4–5 6 6 Class H or K Class R Class H or K Class R Class H or K Class R Class H or K Class R Standard Standard Standard Standard Standard Standard Standard Standard Available Amperes RMS Symmetrical 5,000 100,000 5,000 100,000 10,000 100,000 18,000 100,000 Table 16.242: Class 10 Pump Panel Replacement Motor Logic SSOLR (with rubber boot) Description Pump Panel SSOLR 27A Special Pump Panel SSOLR 45A Special Pump Panel SSOLR 90A Special Pump Panel SSOLR 135A Special Pump Panel SSOLR 270A Special Pump Panel SSOLR 540A Special Pump Panel SSOLR 810A Special 16-82 Catalog Number 3116154764 (Size 1) 3116154883 (Size 2) 3116155158 (Size 3) 3116155368 (Size 4) 3116118474 (Size 5) 3116118476 (Size 6) 3116118477 (Size 7) CP1 Discount Schedule $ Price $192.00 270.00 329.00 477.00 221.00 221.00 221.00 For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WELL-GUARD Control™ Pump Panels Full Voltage Type, Type “S2” Class 8940 / Refer to Catalog 8940CT9701R7/08 www.schneider-electric.us Class 8940 “S2” Pumping Plant Panels in NEMA 3R enclosures are specifically designed for oil field applications. All panels are supplied with a Mag-Gard® circuit breaker or a visible blade, fused, disconnect switch. This line of pumping plant panels features: • Rugged spring latches for easy access without a tool • Side mounted control units for convenient operation • Door retainer available for windy areas • Price includes Hand-Off-Auto selector switch • UL Listed for use as service equipment for motors • Extra panel space for additional electrical controls • All devices are UL Listed, and marked “SUITABLE ONLY FOR USE AS SERVICE EQUIPMENT” Thermal units must be ordered separately at $21.50 each. See page 16-125 for selection information. NOTE: Overload relays are ambient temperature compensated. Table 16.239: 3-Pole Polyphase—480 Vac Maximum (50–60 Hz) Type WC3S2V06 Volts Max. Hp Polyphase Coila Voltage 7-1/2 1 10 240 15 30 NEMA Size 240–60 220–50 40 50 7-1/2 Fusible Disconnect Type Fuse Clip Amperesb Type 30 WC1S2V03 Circuit Breaker Type $ Price 2109.00 2 60 WD1S2V03 2880.00 3 100 WE1S2V03 4649.00 4 200 WF1S2V03 8724.00 1 30 WC3S2V06 2109.00 10 15 480 25 50 2 480–60 440–50 2 3 60 WD3S2V06 2919.00 100 WE3S2V06 4748.00 75 Type XE3S2V02B12S a b Frame Size Type GJL36030M04 XC1S2V03 2228.00 GJL36050M05 XD1S2V03 2997.00 GJL36075M06 XD2S2V03 2997.00 FAL3610018M XE1S2V03 4886.00 KAL3625026M XF1S2V03 8963.00 KAL3625029M XF2S2V03 8963.00 GJL36015M03 XC3S2V06 2262.00 GJL36030M04 XC4S2V06 2262.00 GJL36030M04 XD3S2V06 3036.00 GJL36050M05 XD4S2V06 3036.00 FAL3610018M XE3S2V06 4986.00 KAL3625025M XF3S2V06 9036.00 XF4S2V06 9036.00 4 200 WF3S2V06 8801.00 100 KAL3625029M Coil voltage code must be supplied to order this product. See Coil Voltage Codes table to the left for codes. Fuse clips are sized for use with dual-element time-delay fuses. $ Price Description Form Letter $ Price Substitute Class 10 IEC overload relay – state motor hp (NEMA Sizes 0–4 only) B12 No Charge Control transformer with fused primary: Types: NPD, NPE, NPF, SSC, WC, XC (50 VA) 386.00 NPG, SSD, XD, WD (100 VA) F4T 539.00 NPJ, SSE, XE, WE (150 VA) 797.00 SSF, XF, WF (300 VA) 968.00 SSG, NSG, XSG (50 VA and an interposing control relay) 1097.00 Factory installed door wind latch assembly in a standard 8940NPD, NPE, NPF, NPG, NPJ, SSC, SSD, SSE and SSF G45 113.00 Elapsed time meter G97 827.00 H10 64.00 Substitute Class 10 MOTOR LOGIC® SSOLRe ON Delay Timer K25 1197.00 OFF Delay Timer K26 1197.00 Program timer with day omission feature K141 1197.00 Backspin timer (time delay upon energization) K15 1112.00 Start Pushbutton (S2 panels only) A28 No Charge “Slim” panel (Types WC, WD, WE, XC, XD, XE only) L8 No Charge “Short” panel (Types SSE, SSF, XE-S2 and XF-S2 only) L9 No Charge Pilot light (specify lens color). Does not include auxiliary contact. Pc 336.00 Separate control S No Charge Auxiliary contacts (specify N.O. or N.C.) Xd 158.00 Special UL panel label for modified UL Listed devices on non-standard panels, requires approval Y1 267.00 by manufacturing plant Lightning arrestor Y1532 570.00 Phase failure, phase reversal relay with time delay including under and over voltage protection R44 1463.00 Substitute standard trip melting alloy overload relays – Not available on IEC style contactors Y61 No Charge Substitute quick-trip melting alloy overload relay (Sizes 1 and 2 only) – Not available on IEC style contactors Y611 No Charge c Indicate pilot light color as Form P1 (red) or Form P2 (green). See page 16-109, footnote f for more selections. d To determine the maximum number of auxiliary contacts which can be added to each Type S device and for the appropriate “X Form,” refer to tables in the Class 8536 section. e Motor Logic SSOLR are designed to protect 50/60 hertz three-phase AC motors from overload, phase unbalance and phase loss conditions. Open Delta systems or grounded B-phase systems are difficult to balance and could cause the Motor Logic SSOLR to trip. For applications of this nature, it is recommended that bi-metallic overload relays (Form B12) be used. Table 16.241: Coil Voltage Codes 16 f g Voltage Code $ Price Adder 60 Hz 50 Hz 24fg — V01 N/C 120g 110g V02 N/C 208g — V08 N/C 240 220 V03 N/C — 380 V05 N/C 480 440 V06 N/C 600g 550g V07 N/C Specify Specify V99 35.60 24 V coils are not available on Size 4 starters. On Size 1–3, 24 V coils are available. Form S must be used. Form S required for separate control. For How to Order Information, see page 16-12. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.240: Factory Modifications (Forms) 16-83 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WELL-GUARD Control™ Pump Panels Class 8940 / Refer to Catalog 8940CT9701R7/08 www.schneider-electric.us Approximate Dimensions Table 16.242: Type NPD/E/F SSC SSD NPG/J SSE/F XSE/F WC—S2 WD—S2 XC—S2 XD—S2 WE—S2 WF—S2 XE—S2 XF—S2 SSG XSG XSH XSJ Fig. A IN B mm IN C mm IN D mm IN E mm IN 9.70 246 33.05 F mm IN IN H mm IN J mm IN K mm IN L M mm Conduit IN mm Knockouts R S 1-1/4– 1-1/2 V T IN mm 1 39.05 992 13.73 349 6.67 169 963 7.00 178 2.41 61 3.00 76 3.00 76 2-1/2 2.41 61 1/2–3/4 1 49.00 1245 19.15 486 8.81 224 10.37 263 44.07 1119 47.88 1216 7.00 178 2.17 55 2.69 68 3.44 87 2-1/2 1–1-1/4 2.57 65 1/2–3/4 1–1-1/4 1–2-1/2 1-1/2–2 1.41 36 1 38.50 978 19.00 483 7.29 185 949 7.00 178 2.18 55 2.13 54 2.13 54 1-1/2 2.12 54 1/2–3/4 1–1-1/4 1-1/2 1/2–3/4 1 56.50 1435 23.00 584 8.23 209 10.33 262 52.00 1321 55.38 1407 7.00 178 2.18 55 2.69 68 3.44 87 2 1 74.50 1892 22.00 559 13.80 351 17.55 446 73.00 1854 N/A N/A N/A N/A N/A N/A N/A N/A 1.50 38 2 2 82.50 2096 36.00 914 20.00 508 23.25 591 80.00 2032 33.75 857 16.50 419 N/A N/A N/A N/A N/A N/A 92.50 2350 34.00 864 20.00 508 23.25 591 90.00 2286 31.75 806 16.50 419 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 9.39 239 34.00 839 37.93 G mm 864 37.38 .50 13 14.00 356 N/A N/A .56 14 1/2–3/4 1.41 36 — — 1–1-1/4 2.68 68 1/2–3/4 1–1-1/4 2–2-1/2 1-1/2–2 1.50 38 NOTE: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. Figure 2 Figure 1 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-84 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com AC Duplex Motor Controllers Class 8941 www.schneider-electric.us Duplex Motor Controllers are used to control two motors, and consist of two starters in a common enclosure. Two separate disconnect switches or circuit breakers with operators are included with all combination devices. Unless Form Y68 is specified, an alternation circuit (a Class 8501 Type XO40 relay) is included, which alternately operates first one motor and then the other on each successive closing of a pilot device. Both motors will be energized should a second pilot device close. All devices incorporate a terminal block to simplify wiring of pilot devices A and B. Typical applications include pump motors where a second pump is required for peak demand periods yet alternation is desirable to equalize pump wear. Table 16.243: 3-Pole Polyphase—600 Vac Maximum (50–60 Hz) Non-Combination Type—Without Disconnect—With Electric Alternation Note that the prices shown do not include thermal units. Devices require 6 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Maximum Rating Each Motor NEMA Size Voltage 0 1 2 3 4 200–230 460–575 200–230 460–575 200 230 460–575 200 230 460–575 200 230 460–575 NEMA 4/4X Watertight and Dusttight Enclosure Stainless Steel NEMA 1 General Purpose Enclosure Hp Polyphase 3 5 7-1/2 10 10 15 25 25 30 50 40 50 100 NEMA 12 (NEMA 3 and 3R)a Dusttight and Driptight Industrial Use Enclosure Open Type Type $ Price Type $ Price Type $ Price Type $ Price NBG10b 2322.00 NBW10b 3105.00 NBA10b 2564.00 NBO10b 2138.00 NCG20b 2478.00 NCW20b 3290.00 NCA20b 2721.00 NCO20b 2294.00 NDG30b 3731.00 NDW30b 5427.00 NDA30b 4359.00 NDO30b 3290.00 NEG40b 5112.00 NEW40b 8303.00 NEA40b 5925.00 NEO40b 4487.00 NFG50b 10440.00 NFW50b 15881.00 NFA50b 13131.00 NFO50b 9116.00 Table 16.244: 3-Pole Polyphase—600 Vac Maximum (50–60 Hz) Combination Thermal Magnetic Circuit Breaker Type—With Electric Alternation Note that the prices shown do not include thermal units. Devices require 6 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Max. Hp Polyphase Coil Voltage b NEMA 1 General Purpose Enclosure Circuit Breaker NEMA Size Frame Size FAL Ampere Rating 15 20 CBG06b CBG08b 1 FAL 35 50 CCG12b CCG15b 2 FAL FAL FAL KAL CDG22b CEG32b CEG36b CEG38b CFG41b CFG44b CBG06b CBG08b CCG14b CCG16b $ Price Type $ Price 6951.00 CBA06b CBA08b 4701.00 7109.00 CCA12b CCA15b 4859.00 10470.00 6894.00 6951.00 CDA22b CEA32b CEA36b CEA38b CFA41b CFA44 b CBA06b CBA08b 7109.00 CCA14b CCA16b 240–60 10 60 CDG22b CDW22b 2 FAL 5826.00 10470.00 220–50 15 80 CDG24b CDW24b CEW36b 25 FAL 100 CEG36b 17490.00 3 9401.00 CEW38b 30 KAL 110 CEG38b 40 150 CFG43b CFW43b 4 KAL 29924.00 50 200 CFG44b 19584.00 CFW44b 5 0 FAL 15 CBG10b 4859.00 CBW10b 7862.00 7-1/2 20 CCG18b CCW18b 1 FAL 5013.00 8019.00 10 25 CCG20b CCW20b 15 40 CDG26b CDW26b 460 20 480–60 2 FAL 60 CDG28b 6737.00 CDW28b 12881.00 (480) 25 440–50 70 CDG30b CDW30b 30 80 CEG39b CEW39b 3 FAL 9401.00 17490.00 50 100 CEG40b CEW40b 75 125 CFG45b 19584.00 CFW45b 4 KAL 29924.00 100 200 CFG47b CFW47b a NEMA 12 enclosures may be field modified for outdoor applications. For details refer to Class 9991, page 16-104. b Coil voltage code must be specified to order this product. Refer to standard voltage codes listed on page 16-87. Note: For voltage codes used with control transformers, see page 16-110. CDA22b CDA24b CEA36b CEA38b CFA43b CFA44b CBA10b CCA18b CCA20b CDA26b CDA28b CDA30b CEA39b CEA40b CFA45b CFA47b 2 3 0 5 7-1/2 200 (208) 10 15 20 25 30 40 2 3 5 7-1/2 208–60 4 KAL 0 FAL 60 90 100 110 125 200 15 20 FAL 30 45 3 1 230 (240) Type NEMA 12 NEMA 4/4X (NEMA 3 Watertight and Dusttight and 3R)a Stainless Steel Enclosure Dusttight and Driptight Industrial Use Enclosure $ Price Type 3945.00 CBW06b CBW08b 4103.00 CCW12b CCW15b 5826.00 3945.00 CDW22b CEW32b CEW36b CEW38b CFW41b CFW44b CBW06b CBW08b 4103.00 CCW14b CCW16b 9401.00 19584.00 17490.00 29924.00 10782.00 23400.00 4701.00 4859.00 6894.00 10782.00 23400.00 5612.00 5769.00 7806.00 10782.00 23400.00 16 For How to Order Information, see page 16-12. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Motor Starter Voltage © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-85 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com AC Duplex Motor Controllers Factory Modifications (Forms) Class 8941 www.schneider-electric.us Table 16.245: 3-Pole Polyphase—600 Vac Maximum (50–60 Hz) Combination Disconnect Switch Type—With Electric Alternation Note that the prices shown do not include thermal units. Devices require 6 thermal units. Standard trip thermal units are $21.50 each. See page 16-125 for selection information. Motor Voltage (Starter Voltage) Max. Hp Polyphase Coil Voltage c NEMA Size Fuse Clip Size Ampsb NEMA 4/4X Watertight and Dusttight Enclosure Stainless Steel NEMA 1 General Purpose Enclosure NEMA 12 (NEMA 3 and 3R)a Dusttight and Driptight Industrial Use Enclosure Type $ Price Type $ Price Type $ Price None UBG10c 3731.00 UBW10c 6737.00 UBA10c 4487.00 30 DBG08c 3816.00 DBW08c 6822.00 DBA08c 4572.00 None UCG20c 3888.00 UCW20c 6894.00 UCA20c 4644.00 7-1/2 1 60 DCG18c 3974.00 DCW18c 6980.00 DCA18c 4730.00 200 208-60 (208) None UDG30c 5642.00 UDW30c 10283.00 UDA30c 6708.00 10 2 60 DDG28c 5754.00 DDW28c 10398.00 DDA28c 6822.00 8798.00 UEW40c 16892.00 UEA40c 10184.00 None UEG40c 25 3 9072.00 DEW38c 17163.00 DEA38c 10454.00 200 DEG38c None UBG10c 3731.00 UBW10c 6737.00 UBA10c 4487.00 3 0 30 DBG08c 3816.00 DBW08c 6822.00 DBA08c 4572.00 None UCG20c 3888.00 UCW20c 6894.00 UCA20c 4644.00 7-1/2 1 60 DCG18c 3974.00 DCW18c 6980.00 DCA18c 4730.00 230 240-60 (240) 220-50 None UDG30c 5642.00 UDW30c 10283.00 UDA30c 6708.00 15 2 60 DDG28c 5754.00 DDW28c 10398.00 DDA28c 6822.00 None UEG40c 8802.00 UEW40c 16892.00 UEA40c 10184.00 30 3 200 DEG38c 9072.00 DEW38c 17163.00 DEA38c 10454.00 None UBG10c 3731.00 UBW10c 6737.00 UBA10c 4487.00 5 0 30 DBG10c 3833.00 DBW10c 6836.00 DBA10c 4586.00 None UCG20c 3888.00 UCW20c 6894.00 UCA20c 4644.00 480-60 10 1 30 DCG20c 3987.00 DCW20c 6993.00 DCA20c 4743.00 460 440-50 (480) 575 None UDG30c 5642.00 UDW30c 10283.00 UDA30c 6708.00 25 2 (600) 60 DDG30c 5796.00 DDW30c 10440.00 DDA30c 6866.00 None UEG40c 8802.00 UEW40c 16892.00 UEA40c 10184.00 50 3 100 DEG40c 9230.00 DEW40c 17319.00 DEA40c 10611.00 a NEMA 12 enclosures may be field modified for outdoor applications. For c Coil voltage code must be specified to order this product. Refer to details refer to Class 9991, page 16-104. standard voltage codes listed on page 16-87. b Hp rating applies only when dual element time delay fuses are used. Note: For voltage codes used with control transformers, see page 16-110. 3 0 Table 16.246: Factory Modifications (Forms) Enclosure Type Descriptionh PILOT DEVICES IN COVERd “START-STOP” push buttons—one supplied for each motor. (Form C or Form Y68 required.) “HAND-OFF-AUTO” selector switch—one supplied for each motor. “NO. 1 LEAD—NO. 2 LEAD” selector switch for manual selection of lead pump. (Form Y68 required.) Red "ON" pilot light—one supplied for each motor. Push-to-test red “ON” pilot light—one supplied for each motor. Non-standard markings for pilot devices. “TEST” push button for each starter. CONTROL CIRCUIT MODIFICATIONS Fused control circuit without transformer One fuse Two fuses Fused control circuit transformer, two fuses in primary, with 600, 480, 240 or 208 V primary and 120 V secondary –one supplied for each starter. Fused control circuit transformer, two fuses in primary, one fuse in secondary— one supplied for each starter. 100 VA additional capacity 200 VA additional capacity Extra capacity control circuit transformer—two fuses in primary—one supplied for each starter (See Table 16.247) 100 VA additional capacity 200 VA additional capacity Elapsed time meter for each starter Pressure switch for each starter (Square D pressure switch 9012GAW25) Addition of 2 relays to modify controller for operation with single pole pilot devices. Addition of 3 relays to modify controller for operation with single pole mercury float switches. Control circuit wired for separate 120 V source. 16 Addition of 1 N.O. unwired interlock per starter for use by customer. (1 N.O. unwired interlock per starter is supplied as standard.) Addition of 1 N.C. unwired interlock per starter for customer use. Modified wiring for use with double pole mercury float switches. Deduct for omission of electrical alternating circuit. Additional Control circuit terminals—per wired terminal. (5 point terminal block is standard) Unwired d Not available on open style devices. e Addition of terminal block 9080CA or 9080GR6 only. 5 point terminal block is provided as standard for custom connection. A wiring diagram must be supplied for factory wiring. f Not available on this size. Use Form FF4T_ _. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS g h Form Price/NEMA Size 0–1 2 3 4 671.00 1, 4, 12 A 671.00 671.00 671.00 1, 4,12 Any C 671.00 671.00 671.00 671.00 1, 4, 12 1, 4, 12 Any Any C13 P1 513.00 671.00 513.00 671.00 513.00 671.00 513.00 671.00 P21 G12 Y29 869.00 28.70 671.00 869.00 28.70 671.00 869.00 28.70 671.00 869.00 28.70 671.00 Any Any F F4 627.00 627.00 627.00 627.00 627.00 627.00 627.00 627.00 F4T 770.00 1083.00 1596.00 1938.00 Any Any Any Any FF4T 1395.00 FF4T11 1994.00 FF4T12 2478.00 1710.00 2222.00 2564.00 2393.00 2849.00 3135.00 g 2934.00 3392.00 g 3675.00 g Any Any Any Any Any Any F4T11 F4T12 G97 1446.00 1853.00 1652.00 1767.00 2222.00 2303.00 2763.00 1652.00 1652.00 — f — f 1652.00 D R7 R8 Any S 755.00 1454.00 2178.00 No Charge 755.00 755.00 1454.00 1454.00 2178.00 2178.00 No No Charge Charge 755.00 1454.00 2178.00 No Charge Any Any X10 X01 315.00 315.00 315.00 315.00 315.00 315.00 315.00 315.00 Any Any Any Any Y24 Y68 G56e G50e 314.00 869.00 116.00 57.00 314.00 869.00 116.00 57.00 314.00 869.00 116.00 57.00 314.00 869.00 116.00 57.00 Single primary voltage must be specified. These Forms are most commonly used. Other Forms may be available. Consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733) for additional information. Table 16.247: NEMA Size 0&1 2 3 4 Standard Capacity 100 VA Additional Capacity 200 VA Additional Capacity (Form F4T) (Form F4T11) (Form F4T12) Class 9070 Type T100 T100 T150 T300 Class 9070 Type T200 T200 T300 T500 Class 9070 Type T300 T300 T500 T500 For How to Order Information, see page 16-12. 16-86 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com AC Duplex Motor Controllers Class 8941 www.schneider-electric.us Approximate Dimensions Table 16.248: NEMA 1 Enclosure—Non-Combination (Figure 1) Starter Size A B C D 0, 1, or 2 20-1/2 24-1/8 8-11/16 17-7/8 3 or 4 22-1/8 34 9-3/4 16 A E F F G H 21-1/2 1-5/16 1-5/16 5/16 Dia. 35-1/2 3-1/16 3/4 7/16 Dia. F D C E Table 16.249: NEMA 1 Enclosure—Combination (Figure 2) B Starter Size A B C D E F G 0, 1, or 2 (For FAL Circuit Breaker and 20-3/8 35 9-5/8 17 32-1/2 3-5/16 1-1/4 30 A & 60 A Disconnect Switch) 3 or 4 (For FAL & KAL Circuit Breaker 32 44 10-3/4 24 46 a 1 and 100 A Disconnect Switch) a For FAL & KAL Ckt. Bkr. Dimension F=3-5/16. For 100 A Disc. Sw. Dimension F=4-7/8 H J K 1-1/4 1-1/4 7/16 Dia. 2-1/2 2-1/2 9/16 Dia. G H Figure 1 Table 16.250: NEMA 4 Enclosure—Non-Combination (Figure 3) A B C D E F G H J 0, 1, or 2 20-1/2 24 8 25 15-3/8 26 2-9/16 1/2 5/16 3 or 4 22 34 9-1/8 35 17 36 2-1/2 1/2 9/16 D H Handle Swing C F A Starter Size J Table 16.251: NEMA 4 Enclosure—Combination (Figure 4) Starter Size A B C D 0, 1, or 2 (For FA Circuit Breaker and 20-1/2 35 9-9/16 36 30 A & 60 A Disconnect Switch) 3 or 4 (For FA and KA Circuit Breaker 32 44 10-11/16 46 and 100 A Disconnect Switch) b For FA or KA Ckt. Bkr. K = 3-1/16. For 100 A Disc. Sw. K = 4-7/8 E F G H J K 15-3/8 37 2-9/16 1/2 5/16 3-5/16 26 47 3 1/2 9/16 b E B Table 16.252: NEMA 12/3R Enclosure—Non-Combination (Figure 3) Starter Size A B 0, 1, or 2 20-1/2 24-1/4 3 or 4 22 34 C D E 8 25-1/2 9-1/8 35-1/2 K F G H J 14-3/8 26-1/2 3-1/16 1/2 7/16 16 36-1/2 3 1/2 7/16 G Figure 2 G H G E J Mtg. Holes Table 16.253: NEMA 12/3R Enclosure—Combination (Figure 4) Starter Size A B C D E 0, 1, or 2 (For FA Circuit Breaker and 20-1/2 35 9-9/16 36-1/2 14-3/8 30 A & 60 A Disconnect Switch) 3 or 4 (For FA and KA Circuit Breaker 32-1/4 44-1/4 10-11/16 46 24 and 100 A Disconnect Switch) c For FA or KA Ckt. Bkr. K = 3-5/16. For 100 A Disc. Sw. K = 4-7/8 F G H J K 37-1/2 3 1/2 7/16 3-5/16 47 4-1/8 1/2 9/16 c D B F Table 16.254: Coil Voltage Codes NOTE: Illustrations may not represent the actual enclosure; they are intended for dimensional information only. Dimensions are in inches. H C A Figure 3 G H E G J Mtg. Holes D B F H A K C Handle Swing 16 Figure 4 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Voltage Code $ Price Adder 60 Hz 50 Hz 24ed — V01 No Charge 120e 110 V02 No Charge 208 — V08 No Charge 240 220 V03 No Charge — 380 V05 No Charge 480 440 V06 No Charge 600 550 V07 No Charge Specify Specify V99 35.60 d 24 V coil is not available on Size 4. On Sizes 00–3, where 24 V coils are available, Form S (separate control) must be specified. e These voltage codes must include Form S (No additional charge). © 2009 Schneider Electric All Rights Reserved 16-87 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Contactors Reversing/Hoist, Type R Class 8965 / Refer to Catalog 8910CT9301 www.schneider-electric.us Class 8965 Reversing Hoist Contactors meet the small space requirements found in electrical hoists, light duty cranes, door operators, and related products. They are designed to perform in the short periods of jogging experienced in hoist service. Note that these contactors must be mounted upright on the vertical plane; the contactors will not operate properly when mounted in any other position. Table 16.255: AC Reversing/Hoist Contactors—600 Vac Maximum Horsepower Ratings No. of Poles 3-Pole Polyphase Type RO10V02 a b 115 V 1Ø 230 V 1Ø 230 V 3Ø 460/575 V 3Ø 1 1-1/2 3 3 Jumper straps connect the line side power terminals of the same phase between the forward (up) and reverse (down) contactors in common; i.e. L1 to L1, L2 to L2 and L3 to L3. Coils rated 120 Vac or less are supplied with quick connect terminals Power Terminals Witha Jumper Straps Withouta Jumper Straps Open Type Open Type $ Price Quick Connect RO10c RO11c 998.00 Pressure Wireb RO12c RO13c only. c Voltage code must be specified to order this product. Refer to standard voltage codes shown in the coil table below. Table 16.256: Miscellaneous Hoist Contactor Kits For Use With Class 8965 Type Series Description Class Type RO10 Armature Kit 9998 RP1e RO11 A&B Contact Order as Part Number RO12 Carrier 3100206050 RO13 d CP10 discount schedule. e One armature per kit. Note: See page 16-116 for replacement contact kits. Series Description Armature Kit C Contact Carrier Class 9998 Type RP2e $ Priced 29.40 Order as Part Number 3100208150 39.40 C Provisions for (3) #8 Mounting Screws G Table 16.257: Auxiliary Contacts Separate Module Description Terminals 1 N.O. Each Side Quick Connect Screw Quick Connect Screw 1 N.C. Each Side Class 9999 Type R10 R12 R11 R13 $ Price B 50.00 F Table 16.258: Coil Table Voltage Voltage Voltage 60 Hz 50 Hz Code 24— V01 120 110 V02 208/220 — V21 240 220 V03 480 440 V06 600 550 V07 f CP10 Discount Schedule. g Tape wound coils, 2 per package. h Molded coil, 1 per package. i Suitable for 440 V 50 Hz applications. E Replacement Part Number 3100240319g 3100240340g 3100240047h 3100240049h 3100240058hi 3100240060h $ Pricef 119.00 119.00 114.00 114.00 114.00 83.00 D A Table 16.259: Approximate Dimensions (3 Poles per Contactor) Type RO10, 11 RO12, 13 A 3.31 84 3.31 84 B 3.31 84 3.69 94 C 3.03 77 2.69 68 D 2.69 68 2.69 68 E 1.34 34 1.34 34 F 1.56 40 1.56 40 G 2.66 68 2.66 68 Table 16.260: Cross Reference—Obsolete Devices Obsolete Device Class 8702 or 8965 8965 Replacement Device Type HO3 HO4 HO5 HO6 HO7 HO8 RG2S1 RG5S1 RG5S2 RO1 RO1S1 RO1S2 RO1S3 RO1S4 RO1S5 RO1S6 Class 8965 8965 Type RO12 RO12 RO12 RO12 RO12 RO12 RO10 RO12 RO12 RO10 RO11 RO10 RO11 RO10 RO10 RO10 Auxiliary Contact Required Class — 9999 9999 — 9999 9999 9999 9999 9999 — — — — — — — Obsolete Device Type — R12 R13 — R12 R13 R10 R12 R12 — — — — — — — Class Type 8965 RO2 RO2S1 RO2S2 RO3 RO3S1 RO3S2 RO3S3 RO4 RO4S1 RO5 RO5S1 RO5S2 RO6 RO6S1 RO6S2 Replacement Device Auxiliary Contact Required Class Type Class Type 8965 RO10 RO11 RO10 RO10 RO11 RO10 RO10 RO12 RO13 RO12 RO13 RO12 RO12 RO13 RO12 9999 9999 9999 9999 9999 9999 9999 — — 9999 9999 9999 9999 9999 9999 R10 R10 R10 R11 R11 R11 R11 — — R12 R12 R12 R13 R13 R13 16 Application Data NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Coils Burden Duty: Hoist Duty-H4 Intermittent Voltage Range: AC coils only +10%,-15% of nominal Inrush 76 VA, Sealed 27 VA Approvals Table 16.261: How to Order UL Component Recognized: File E78351, CCN NLDX2 CSA Certified: File LR60905, Class 3211 04 16-88 CP1 CP10 Discount Schedule • • • To Order Specify: Class Number Type Number Voltage and Frequency Catalog Number Class Type Voltage/Frequency 8695 RO10 V02 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Definite Purpose Contactors Reversing Hoist, Type DPR Class 8965 / Refer to Catalog 8910CT9301 www.schneider-electric.us Class 8965 Type DPR reversing/hoist contactors are designed for the control of motors in hoists, overhead doors, small elevators, commercial laundry equipment, and other related products which use reversing motors. They are rated to perform in the short periods of jogging experienced in hoist service. The coils are designed to operate on line voltages of 85% to 110% of rated voltage, and are for applications at 50 or 60 Hz only. Coils are easily replaced with external base removed. Auxiliary contacts may be easily field–added to any Class 8965 reversing contactor. Type DPR contactors accept one auxiliary contact module with up to two isolated circuits per side (two modules per device). When auxiliary contacts are ordered separately, two modules are normally used for each device; one for forward, one for reverse. Type DPR23V02 Table 16.262: Reversing/Hoist Contactors—600 Vac Maximumd Horsepower Ratingsa No. of Poles 115 V 1Ø 1 2 2 3 3 5 3Pole PolyPhase a b c d e Replacement Coilb 230 V 3Ø 5 7-1/2 10 15 15 25 460/575 V 3Ø 7-1/2 10 15 20 30 30 Type $ Price DPR13e DPR23e DPR33e DPR43e DPR53e DPR63e 998.00 1139.00 1283.00 1425.00 1614.00 1758.00 Class 9998 Type DA1e DA1e DA1e DA1e DA2e DA2e 2 3 5 7-1/2 5 7-1/2 10 10 7-1/2 10 15 20 DPR14e DPR24e DPR34e DPR44e 1070.00 1211.00 1353.00 1497.00 DA2e DA2e DA2e DA2e 1 2 2 3 4-Pole PolyPhase Open Type 230 V 1Ø 2 3 5 7-1/2 10 10 $ Pricec 68.00 68.00 68.00 68.00 92.00 92.00 92.00 92.00 92.00 92.00 For rapid operation (jogging duty), use the next larger size contactor. Order two replacement coils for reversing contactors. CP10 Discount Schedule, not CP1. See page 16-116 for replacement contacts. Voltage code must be specified to order this product. Refer to standard voltage codes listed below. Table 16.263: Auxiliary Contacts Separate Modulef f Description Class 9999 Type 1 N.O. D10 1 N.C. D01 1 N.O.–1 N.C. D11 2 N.O. D20 Order two modules for Type DPR, one for each side. $ Price 35.60 24.60 64.00 44.30 Table 16.264: Factory Installed Description 1 N.O. Each Side 1 N.C. Each Side 1 N.O.–1 N.C. Each Side 2 N.O. Each Side Form X1010 X0101 X1111 X2020 $ Price 95.00 95.00 153.00 153.00 Table 16.265: Coil Voltage Codes Volts, 60 Hz 24 120 208–240 277 480 600 Volts, 50 Hz 24 110 220 — 440 550 Voltage Code V14 V02 V09 V04 V06 V07 Approvals UL Component Recognized—File E42240, CCN NLDX CSA Certified—File LR25490, Class 3211 04 Approximate Dimensions 3.37 86 3.76 (Fastons) 96 3.72 3.19 95 3.86 (Box Lugs) 81 3.98 101 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 98 6.87 174 3.07 78 5.87 149 16 Type DPR13 through DPR43 © 2009 Schneider Electric All Rights Reserved CP1 CP10 Discount Schedule 16-89 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Overload Relays—NEMA Rated Melting Alloy Class 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us NEMA-rated Thermal Overload Relays feature: • • • • Exclusive One-Piece Thermal Unit Inverse Time Delay Trip Trip Free Reset Mechanism on Types G & S Replaceable Contact Units on Types G & S Note that the prices shown on this page do not include thermal units. Standard trip thermal units are $21.50 each. Slow trip (Class 30) and quick trip (Class 10) melting alloy thermal units are available for all Size 1, 2, 5 and 6, and some Size 3 and 4 applications. Table 16.266: For Separate Mounting—Melting Alloy—600 Volts Maximum, AC or DCa NEMA Size Type CO1R Maximum Full Load Current (A) Open Type for Separate Panel Mounting Left Hand Type Right Hand Type For Terminal Block Channel Mounting Order Open Type Relay and Bracket Kit Below $ Price Type $ Price Single Pole Construction (One N.C. Contact)—1 Thermal Unit Required 1 25 CO1b CO1Rb 64.00 — — 2 45 TO1b TO1b 72.00 — — 3 86 UO1b UO1b 122.00 — — 4 133 FO1Lb FO1Rb 192.00 — — 5 266 GO11Lb GO11Rb 777.00 — — Three Pole Construction (One Common N.C. Contact on Type S Only)—3 Thermal Units Required 1 25 SEO5 129.00 SM2 35.60 2 45 SEO8 185.00 SM2 35.60 3 86 SEO12 243.00 — — 4 133 SEO15 386.00 — — 5 266 Use 3 Type GO11R Relays Listed Above — — a Maximum power circuit rating for separate mounting overload relays, Types C, F, G, T and U, is 600 Vac or Vdc; Type S is 600 Vac only. Maximum control circuit contact rating for Types C, F, G, T, U and SDO18 is 600 Vac and 250 Vdc; the remaining Type S versions are 600 Vac only b Not UL listed. Table 16.267: Replacement Melting Alloy Overload Relays for Square D Class 8536 Starters Locate Class 8536 Starter in this Column NEMA Size c Series Type $ Price Number of Thermal Units Required SDO4 86.00 1 SDO5 149.00 3 SDO4 86.00 1 0 SB A SDO5 149.00 3c SDO4 86.00 1 1 SC A SDO5 149.00 3c 1P SC A SDO10 116.00 1 SDO7 116.00 1 2 SD A SDO8 207.00 3c SDO11 143.00 1 SDO12 264.00 3 3 SE A SDO13 264.00 2 SDO14 264.00 3 SDO15 414.00 3 4 SF A SDO16 414.00 2 SDO17 414.00 3 SDO18 Series A 777.00 1 5 SG A 3 Form Y500 and Series B use SEO5 129.00 3 6 SH A&B 3 SEO5 129.00 3 For 4-pole starters used on two phase systems order two thermal units plus one Class 9998 Type SO31 jumper strap kit for every two starters. Each kit includes two jumper straps. 00 Type SE05 Type Order Class 9065 Overload Relay from this Column Number of Poles SA 2 3 2 3–5 2 3–5 2 2 3–5 2 3 4 5 3 4 5 A&B Table 16.268: Special Features for Melting Alloy Types Substitute 1-N.O. isolated alarm contact and 1-N.C. contact per relay. (Type S starters only)e Substitute 2-N.C. contacts for standard N.C. contact per relay. (Type S starters only) Modify Type U relay to accept Type FB quick trip or SB slow trip thermal units. (Accepts Type C standard trip) Modify Type SDO12 relays to accept Type FB quick trip or SB slow trip thermal units, and Type F and Type SDO15 relays to accept Type FB quick trip thermal units. (Rejects Type CC standard trip units) d This form cannot be field modified. e Field modification possible. Order 9999S04 (for Form Y342) or 9999S05 (for Form Y344). Form Y342e Y344e Y21d $ Price 179.00 179.00 No Charge Y81d No Charge 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-90 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Overload Relays—NEMA Rated Solid State Overload Relay, Motor Logic® and Motor Logic Plus Class 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us Base Unit relays feature: 3 to 1 adjustment for trip current; phase loss and unbalance protection; direct replacement for Type S melting alloy. They are ambient insensitive and self–powered. Electrical remote reset is also available. NOTE: Motor Logic SSOLR are designed to protect 50/60 hertz three-phase AC motors from overload, phase unbalance and phase loss conditions. Open Delta systems or grounded B-phase systems are difficult to balance and could cause the Motor Logic SSOLR to trip. For applications of this nature, it is recommended that bi-metallic overload relays (Form B12) be used. Motor Logic Table 16.269: Base Unit: For Separate Mounting Solid State Overload Relay 600 Vac Maximum Full Load Open Type NEMA Sizeg Current Range $ Price (3-Pole) Trip Class 10 Trip Class 20 (Amperes) 00Ca 3–9 SSC10 SSC20 192.00 0a 6–18 SS010 SS020 192.00 1a 9–27 SS110 SS120 192.00 2 15–45 SS210 SS220 270.00 3 30–90 SS310 SS320 329.00 4 45–135 SS410 SS420 477.00 a Size 00C, 0, and 1 are supplied without lugs. Lower amperage loads can be protected by looping of power wires. Lugs are available, see page 16-120. Table 16.272: Feature Unit: Replacement SSOLR for Retrofit of Square D Type S Starter Solid State Overload Relay 600 Vac Maximum Overload Relay from Locate 8536 Starter in this column Order Class 9065 this column Open Type $ Price Trip Class 10/20 00Bh 1.5–4.5 SFB20 221.00 00Ch 3–9 SFC20 221.00 0h 6–18 SF020 221.00 1h 9–27 SF120 221.00 2 15–45 ST220 288.00 3 30–90 ST320 351.00 4 45–135 ST420 516.00 5i 90–270 ST520 221.00 5j 90–270 SF520 1074.00 6i 180–540 ST620 221.00 7i 270–810 ST720 221.00 Size 00B, 00C, 0, and 1 are supplied without lugs. Lower amperage loads can be protected by looping of power wires. Size 5, 6 and 7 Replacement Overloads are only for existing NEMA S starters with MOTOR LOGIC overload relay. External CTs and additional components are not included. Size 5 is a complete drop-in replacement for Square D NEMA S melting alloy, bimetallic, and Y500 overload relays only. NEMA Size 00B and 00C are not actual NEMA sizes. These designations are used to differentiate the lower FLA of these devices from the NEMA Size 00 Motor Logic Solid State Overload Relay. Full Load Current Range (Amperes) NEMA Sizek h i j k Motor Logic Plus (Plan Obsolescene Phase) Motor Logic Plus solid state overload relay is separately powered and fully programmable. It is designed to protect 200–480 Vac or 600 Vac, 3-phase AC motor applications. The SSOLR has one Form C relay output rated for 300 Vac maximum. Table 16.270: Base Unit: Replacement SSOLR for Retrofit of Square D Type S Starter Solid State Overload Relay 600 Vac Maximum Locate 8536 Starter in this column Order Class 9065 Overload from this column Full Load Open Type NEMA Sizeg Current Range $ Price Trip Class 10 Trip Class 20 (Amperes) 00Cb 3-9 SSC10 SSC20 192.00 0b 6-18 SS010 SS020 192.00 1b 9-27 SS110 SS120 192.00 2 15-45 SR210 SR220 251.00 3e 30-90 SR310 SR320 306.00 4e 45-135 SR410 SR420 449.00 5c 90-270 SR510 SR520 192.00 5d 90-270 SS510 SS520 1044.00 b Lug - Bar Kits are available for Size 00C, 0 and 1. Lower amperage loads can be protected by looping of power wires. See page 16-120. c Size 5 Replacement Overload is only for existing NEMA S starters with MOTOR LOGIC overload relay. External CTs and additional components are not included. d Size 5 is a complete drop-in replacement for Square D NEMA S melting alloy, bimetallic, and Y500 overload relays only. e Need 9999ER4 for reset bar. Feature Unit relays include all of the features found on the Base Unit relays plus: switch selectable trip class; Class II ground fault detection; and direct replacement for Type S melting alloy. Electrical remote reset is also available. Table 16.271: Feature Unit: For Separate Mounting Solid State Overload Relay 600 Vac Maximum Full Load Open Type Current Range $ Price Trip Class 10/20 (Amperes) 00B 1.5–4.5f SFB20 221.00 00C 3–9f SFC20 221.00 0 6–18f SF020 221.00 1 9–27f SF120 221.00 2 15–45 SF220 309.00 3 30–90 SF320 378.00 4 45–135 SF420 545.00 Size 00B, 00C, 0, and 1 are supplied without lugs. Lower amperage loads can be protected by looping of power wires. Lugs are available. See page 16-120. NEMA Size 00B and 00C are not actual NEMA sizes. These designations are used to differentiate the lower FLA of these devices from the NEMA Size 00 Motor Logic Solid State Overload Relay. NEMA Sizeg (3-Pole) f Table 16.273: Class 9065 SP Solid State Overload Relay Product Description Current Range SPB4 SPB6 0.5–2.3 A SPC4 SPC6 2.0–9.0 A SP14 SP16 6.0–27.0 A SP24 SP26 10.0–45.0 A SP34 SP36 20.0–90.0 A SP44l SP46l 60.0–135.0 A SP54m SP56m 120.0–270.0 A SP64n SP66n 240.0–540.0 A l With 150:5 external current transformers. m With 300:5 external current transformers. n With 600:5 external current transformers 200 to 480 V $ Price 600 V 957.00 Table 16.274: Forms for factory addition to 8536 Open Style only Alpha Character B First Digit 2 3 4 5 6 7 8 9 Second Digit 0 2 4 6 MOTOR LOGIC Plus Overload Relay Current Ranges 0.5–2.3 A 2.0–9.0 A 6.0–27.0 A 10.0–45.0 A 20.0–90.0 A 60.0–135.0 A 120.0–270.0 A 240.0–540.0 A Modifications No Modification for 200–480 V Add Communication Module for 200–480 V No Modification for 600 V Add Communication Module for 600 V Example Form B 4 2 Motor Logic Plus overload relay with a current range of 6–27 A and modifications to add communication module for an open style starter package. See pages 16-105–16-106 or dimensions. Accessories located on page 16-120. 16 g Motor Logic Plus NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Motor Logic © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-91 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com TeSys® T Motor Management System Protection components www.schneider-electric.us TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. TeSys T is a green motor management system with unique power monitoring capabilities for better energy management. TeSys T carries all appropriate and necessary third party certifications. See page 16-93. Selection of TeSys T Products LTMR Controller The LTMR controller provides a wide range of current monitoring and five different communication protocols. Table 16.275: New! Type of Fieldbus Supply Voltage 0.4–8 A Catalog Current Number Range 1.35–27 A 5–100 A Modbus 24 Vdc LTMR08MBD LTMR27MBD LTMR100MBD Profibus DP 100–240 Vac LTMR08MFM LTMR27MFM LTMR100MFM 24 Vdc LTMR08PBD LTMR27PBD LTMR100PBD 100–240 Vac LTMR08PFM LTMR27PFM LTMR100PFM For Pricing Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-94 Table 16.276: New! Type of Fieldbus Supply Voltage 0.4–8 A Catalog Current Number Range 1.35–27 A 5–100 A Ethernet ModbusTCP 24 Vdc LTMR08EBD LTMR27EBD LTMR100EBD CANopen DeviceNet 100–240 Vac 24 Vdc 100–240 Vac 24 Vdc LTMR08EFM LTMR08CBD LTMR08CFM LTMR08DBD LTMR27EFM LTMR27CBD LTMR27CFM LTMR27DBD LTMR100EFM LTMR100CBD LTMR100CFM LTMR100DBD 100–240 Vac LTMR08DFM LTMR27DFM LTMR100DFM For Pricing Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-94 LTMR08MBD Use the external current transformer for the 100 A to 1000 A range. See page 16-94 for details. For more information about the LTMR controller, see page 16-94. LTME Expansion Module The LTME expansion module, when added to the LTMR controller, provides power monitoring, energy management and voltage. The TeSys T expansion module makes the most of your energy. Table 16.277: New! Input Voltage Catalog Number 24 Vdc 100–240 Vac LTMEV40BD LTMEV40FM For Pricing Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-94 LTMEV40BD The LTME expansion module and the LTMR controller are connected side-by-side or remotely by cable. See page 16-94 for details. For more information about the LMTE expansion module, see page 16-94. LTMCU Compact Display The LTMCU compact display is an easy and intuitive way to connect to the TeSys T controller and allows full set-up through menus, full monitoring, full control and full commissioning. The LTMCU display allows you to make minor changes “on the fly.” For more flexibility, the LTMCU display is powered by the base unit and can be set up in multiple languages. Table 16.278: New! Catalog Number LTMCU 16 For Pricing Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-94 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS The LTMCU compact display connects to the LTMR controller or the LTME expansion module with a cable, LU9R. See page 16-94 for details. For more information about LTMCU compact display, see page 16-94. For more information about TeSys T functionalities and communication capabilities, see page 16-93. LTMCU Table 16.279: Configuration Tools and Accessories Module Current transformers Ground sensor Thermistor probe Connecting cable Magelis® compact display PowerSuite V2.5 or greater PowerLogic SMS 4.0 16-92 Quick Description Allows use of TeSys T up to 1000 A Measures ground currents Measure temperatures of motor windings Wire together the different modules Use only one HMI for up to 8 TeSys T controllers Configuration software for TeSys U and TeSys T Use with TeSys T power/energy management features I12 Discount Schedule Find out more and Select it... Page 16-95 Page 16-95 Page 16-95 Page 16-96 Page 16-94 Page 16-95 Page 16-96 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com TeSys® T Motor Management System Protection components www.schneider-electric.us TeSys T detailed functionalities and possible configuration: Communication: TeSys T is a flexible motor management system that supports five major communication protocols: Modbus, CANopen, DeviceNet, Profibus, and Ethernet Modbus TCP. These communication protocols allow the TeSys T controller to integrate seamlessly into your automation systems. Ethernet Modbus TCP provides Faulty Device Replacement to reduce maintenance time to a minimum. Protection functions: Motor control modes: • • • • • • • • • 10 predefined motor control modes are incorporated in the controller: thermal overload phase imbalance and phase failure thermal motor protection via PTC probes phase reversal ground fault detection long starting times and motor stalling automatic load shedding and restarting load fluctuations (current, voltage, power) variations of Cos ϕ (power factor) • • • • • Metering functions: • Measurements (rms values): — — — — • current on the 3 phases voltage on the 3 phases (shedding) motor temperature ground fault sensing Values calculated: — — — average current frequency Power factor, power, power consumption Motor control functions: A motor managed by a TeSys T controller can be controlled: • • locally, using the logic inputs present on the product, or via the human machine interface (HMI) remotely, via the network overload mode: monitoring of motors whose control is not managed by the controller (2 or 3 wire) independent mode: starting of full voltage non-reversing motors reverser mode: starting of full voltage reversing motors 2-step mode: 2-step starting of motors (star-delta, by autotransformer and by resistor) 2 or 3 wire 2-speed mode: 2-speed starting of motors (Dahlander, pole changer) 2 or 3 wire A custom mode is available to allow the user to create a specific motor control mode that is not predefined in the controller. Custom Logic has the basic functions of a small programmable logic controller (PLC). Programming can be done in Structured Text mode or in Block Diagrams through PowerSuite V2.5 software. To ensure consistency, the same software used to commission the TeSys T controller is used for Custom Logic programming. Statistical and diagnostic functions: • • • • history of the last five detected faults motor statistics controller operations warning of pending faults Standards and Certifications Product Type Conforming to standards Product certifications LTMR Controllers LTMEV40 Expansion Modules IEC/EN 60947-4-1, UL 508, CSA 22-2 n°14, IACS E10 UL, CSA, BV, LROS, DNV, GL, RINA, ABS, RMRos, NOM, CCC, C-TIC’K, ATEX, GOST, KERI Possible Configurations: TeSys T controller is a flexible motor management system using PowerSuite V2.5 commissioning tools. PowerSuite is the configuration software for the TeSys T controllers. See page 16-95 for details. LTM CU PLC (automation platform) Network or bus TeSys T PowerSuite LTM CU NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS TeSys T connector PowerSuite LTMR © 2009 Schneider Electric All Rights Reserved 16 PowerSuite I12 Discount Schedule 16-93 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com TeSys® T Motor Management System Protection Components www.schneider-electric.us LTMR Controller: The controller is the central component in the motor management system. It manages the basic functions such as: • LTME Expansion Module: The expansion module adds the following functionalities to the TeSys T controller: measurement of 3-phase current via integral current transformers from 0.4 to 100 A (up to 1000 A by external current transformers) measurement of ground current internally or LTMR08MBD external ground sensors measurement of motor temperature inputs and outputs for the various motor control modes, detected fault management, and other functions • • • • • voltage measurement between phases up to 690 V nominal 4 additional inputs Inputs • • LTMEV40BD 4 discrete logic inputs (isolated) 2 types of power for the inputs: 24 Vdc and 100 to 240 Vac — Characteristics A 24 Vdc LTMR controller can be assembled with a 240 Vac expansion module and vice versa As standard, the controller manages the following: Control Modes The LTMVE must be connected to the LTMR controller by a connecting cable. • • • • • • Table 16.2: overload mode independent mode reverser mode 2-speed mode 2-step mode Custom mode Input Control Voltage 24 Vdc 100–240 Vac • Setting Range (A) Control Voltage (V) Catalog Number 24 Vdc 100–240 Vac 24 Vdc 27 100–240 Vac 24 Vdc 100 100–240 Vac For EtherNet Modbus TCP 0.4–8 0.4–8 1.35–27 1.35–27 5–100 5–100 LTMR08MBD LTMR08MFM LTMR27MBD LTMR27MFM LTMR100MBD LTMR100MFM 675.00 675.00 675.00 675.00 765.00 765.00 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 0.4–8 0.4–8 1.35–27 1.35–27 5–100 5–100 LTMR08EBD LTMR08EFM LTMR27EBD LTMR27EFM LTMR100EBD LTMR100EFM 825.00 825.00 825.00 825.00 935.00 935.00 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 0.4–8 0.4–8 1.35–27 1.35–27 5–100 5–100 LTMR08CBD LTMR08CFM LTMR27CBD LTMR27CFM LTMR100CBD LTMR100CFM 750.00 750.00 750.00 750.00 850.00 850.00 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 0.4–8 0.4–8 1.35–27 1.35–27 5–100 5–100 LTMR08DBD LTMR08DFM LTMR27DBD LTMR27DFM LTMR100DBD LTMR100DFM 750.00 750.00 750.00 750.00 850.00 850.00 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 24 Vdc 100–240 Vac 0.4–8 0.4–8 1.35–27 1.35–27 5–100 5–100 LTMR08PBD LTMR08PFM LTMR27PBD LTMR27PFM LTMR100PBD LTMR100PFM 750.00 750.00 750.00 750.00 850.00 850.00 $ Price Modbus® 8 8 27 100 $ Price 300.00 300.00 Control/monitoring of a 1 to 1 LTMR controller Control/monitoring of 1 to 8 LTMR controllers LTMCU Compact Display: Current Range (A) For via the LTMR controller LTMEV40BD LTMEV40FM A Magelis XBTN410 terminal — connection for a thermistor probe connections for a ground sensor Controllers Catalog Number The LTMCU operator control unit: — • Measurements Table 16.1: Supply to the Electronics Depending on the application, two types of HMI can be used with the motor management system. 6 discrete logic inputs 3 relay logic outputs (1 N.O.) 1 relay output for detected fault signalling (1 N.O. + 1 N.C.) overload relay • • Number of Inputs 4 4 HMI — Human Machine Interface: Inputs/Outputs • • • Expansion Module New! • • • • • Configure the parameters Display information Monitor the alarms and detected faults Local control of the motor via the local control interface (keys can be customized) Three different languages can be loaded into the LTMCU controller at the same time: English, French, Spanish are the defaults. LTMCU A language download utility (LangTool), together with all the other languages, are available on the website www.schneider-electric.com. This tool allows the languages present in the LTMCU control until to be adapted. The LTMCU HMI control unit has an additional front panel RJ45 port, protected by a flexible cover. Magelis Display: For CANopen 8 27 100 For DeviceNet 8 16 27 100 Two applications have been predefined for the TeSys T controller. Depending on the application loaded, the HMI terminal makes it possible to: • • Configure and monitor a motor starter (LTM_1T1_V1.dop) Monitor and modify certain parameters up to 8 motor starters (LTM_1T8_X_V1.dop) NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS For Probibus DP 8 27 100 XBTL1000 programming software is needed for loading applications into the XBT HMI terminal. Table 16.3: HMI Modules and Software New! Description Operator Control unit Magelis compact display Configuration software Windows 99, 2000, XP 16-94 I12 Discount Schedule Supply Voltage via the LTMR controller 24 Vdc Catalog Number $ Price LTMCU 265.00 XBTN410 300.00 VJD SND TMS V11M 161.00 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com TeSys® T Motor Management System Protection Components www.schneider-electric.us Table 16.1: Current Transformers New! Current Transformer Ratio a 100:1 200:1 400:1 800:1 a For use with LTMR08●● controllers. Table 16.2: $ Price Catalog Number $ Price Internal Toroid Ø (mm) Closed Toroids, Type A 65 30 85 50 160 80 250 120 400 200 630 300 Split Toroids, Type OA1530.00 85 46 250 110 Note: Dimensional drawings are in catalog DIA1ED2061002EN-US. Table 16.3: 50437 50438 50439 50440 50441 50442 250.00 325.00 410.00 555.00 835.00 1530.00 50485 50486 1145.00 2010.00 PTC Thermistor Probes b New! Nominal Operating Temperature Color (NOT) °C Triple Probes 90 Green/green 110 Brown/brown 120 Grey/grey 130 Blue/blue 140 White/blue 150 Black/black 160 Blue/red 170 White/green b PTC: Positive Temperature Coefficient. c Sold in lots of 10. Description DA1TT●●● 300.00 300.00 700.00 1000.00 Ground Fault Sensors New! Rated Operational Current le (A) LT6CT4001 Catalog Number LT6CT1001 LT6CT2001 LT6CT4001 LT6CT8001 Catalog Number c $ Price Each DA1TT090 DA1TT110 DA1TT120 DA1TT130 DA1TT140 DA1TT150 DA1TT160 DA1TT170 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 Configuration with PowerSuite The TeSys T configurator is incorporated in the PowerSuite software application, versions 2.5 and higher. PowerSuite software allows configuration, commissioning and maintenance of motor starters protected by a TeSys T controller. A library containing predefined motor control mode functions is available in order to: • • • allow standardization avoid errors reduce motor starter setup times By using logic functions, a custom mode makes it possible to: • • easily adapt these predefined motor control mode functions to the specific needs of your applications create new functions The functions thus defined can be saved and used to build your function library for future applications. To create special functions, a logic editor is incorporated in the configurator and allows a choice of 2 programming languages: function block structured text A Table 16.4: Configuration Tools New! Description Connection kit for PC serial port for Modbus® PLC multidrop connection Composition 1 x 3 m length cable with two RJ45 connectors 1 RS232/RS485 converter with one 9-pin female SUB-D connector and one RJ45 connector. 1 USB cable, SUB-D 9-pin Drivers supplied on CD-Rom $ Price VW3A8106 75.00 SR2CBL06 156.00 TXSCUSB485 250.00 16 Interface for USB port (for use with cable W3A8106) Length: 1.8 m USB serial port cable for connecting a 1 USB/Serial Port Cable TeSys T controller to your PC Catalog Number NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS • • © 2009 Schneider Electric All Rights Reserved I12 Discount Schedule 16-95 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com TeSys® T Motor Management System Protection Components www.schneider-electric.us TeSys T and SMS PowerLogic: TeSys T is integrated in PowerLogic SMS Version 4.0. and will address energy management needs by fully utilizing the TeSys T power/energy management features. For more information on PowerLogic products, see Power Monitor Control Section 4. Table 16.1: Connecting Cables New! Description Number and type of connectors 2 x RJ45 LTMCU control unit SUB-D 25-pin female to RJ45 2 x RJ45 XBTN410 LTME expansion module 180 degree Ethernet external connector Table 16.2: Shielded twisted pair cables, UL and CA 22.1 approved Straight Cables fitted with 2 x RJ45 connectors for connection to terminal equipment For Modbus® PLC connection Cables fitted with 2 x RJ45 connectors T-junctions RS485 line terminator For CANopen connection Cables IP20 connectors SUB-D 9-pin female Line end adapter switch Elbowed (90°) XBTZ938 30.00 LTMCC004 LUR03 LU3R10 125.00 20.00 25.00 – LTM9CE180T 20.00 Length m (ft) Catalog Number 2 (7) 5 (16) 12 (39) 40 (131) 80 (263) 490NTW00002 490NTW00005 490NTW00012 490NTW00040 490NTW00080 48.60 58.00 77.00 150.00 266.00 2 (7) 5 (16) 12 (39) 40 (131) 80 (263) 490NTW00002U 490NTW00005U 490NTW00012U 490NTW00040U 490NTW00080U 48.00 57.00 75.00 159.00 258.00 0.3 (1) 1 (3) 3 (10) 0.3 (1) 1 (3) – VW3A8306R03 VW3A8306R10 VW3A8306R30 VW3A8306TF03 VW3A8306TF10 VW3A8306R 20.00 25.00 30.00 75.00 85.00 N/A 50 (164) 100 (328) 300 (984) – TSXCANCA50 TSXCANCA100 TSXCANCA300 TSXCANKCDF90T 112.00 467.00 1323.00 52.00 52.00 $ Price – TSXCANKCDF180T – TSXCANKCDF90TP With line terminator Without line terminator With line terminator and terminal port 78.00 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 50 (164) 100 (328) 300 (984) TSXCANCA50 TSXCANCA100 TSXCANCA300 112.00 467.00 1323.00 100 (328) 400 (1313) – – – TSXPBSCA100 TSXPBSCA400 490NAD01103 490NAD01104 490NAD01105 826.00 2990.00 73.00 62.00 Sold in lots of Catalog Number 101.00 Marking Accessories New! Composition Strips of 10 identical 25 AB1R● a numbers (0 to 9) Strips of 10 identical ●a 25 AB1G capital letters (A to Z) When ordering replace the ● in the catalog number with the number or letter required. Clip-in markers (maximum of 5 per unit) 16-96 2.5 (8) Elbowed (90°) SUB-D 9-pin connector for connection to PC or diagnostic tool For Profibus DP connection Cables a 35.00 35.00 35.00 Straight For DeviceNet connection Cables Description $ Price VW3A1104R10 VW3A1104R30 VW3A1104R50 Connection Accessories New! For EtherNet (Modbus TCP) connection Shielded twisted pair cables to standard EIA/TIA568 Straight Cables fitted with 2 x RJ45 connectors for connection to terminal equipment Table 16.3: Catalog Number 0.04 (0.13) 0.3 (1) 1 (3) 1 x RJ45 Description Connectors Length m (ft) 1 (3) 3 (10) 5 (16) I12 Discount Schedule $ Price Each 0.52 0.52 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com TeSys® T Motor Management System Protection Components www.schneider-electric.us LTMR●● controllers ■ 122.5 ▲ 91 61 30.2 5.2 ■ ■ ■ LTMEV40●● expansion modules 120.7 ▲ 45 61 ■ ▲ 30.2 5.5 LTMCU operator control unit Panel mounting, cut-out 92 70 45 117 23 50 a b 140 mm with RJ45 connector for connection to expansion module and to network, 166 mm with Profibus DP/CANopen connector. Leave a gap around the device of: 9 mm at 45 °C, 9 to 40 mm from 45 to 50 °C, 40 mm at 60 °C. HMI Terminal LT6CT XBTN410 25 35 25 5 42,5 42,5 5 2,5 10 10 20 5 2,5 74 c 95 © 2009 Schneider Electric All Rights Reserved 132 6 c d 104 mm with mounting clips (supplied with the product). 58 mm with SUB-D 25-pin elbowed cable XBTZ9680 for Twido®, TSX Micro™ and Premium™ PLCs or XBTZ998 for Advantys™ STB distributed I/O system. 104 mm with SUB-D 25-pin cable XBTZ68/Z9681 for Twido®, TSX Micro™ and Premium™ PLCs I12 Discount Schedule NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 5 16 30 d 35 107 42 Current Transformers 16-97 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Overload Relays—NEMA Rated Bimetallic Class 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us Bimetallic thermal overload relays feature Class 20 protection with automatic reset or hand reset and a trip-free mechanism. There are ambient temperature-compensated versions. Note that thermal units are not included in the shown prices. Standard trip thermal units are $21.50 each. Table 16.287: For Separate Mounting—Bimetallic—600 V Maximum AC or DCa Description Class 9065 Type SEO6B2 Three Pole Construction Non-Compensated Size Maximum Full Load Current (Amperes) Open Type $ Price Bracket Kit for Terminal Block Channel Mounting Type Price Number of Thermal Units Required Single Pole Construction (One N.C. Contact) 00, 0, 1 25 DA2 107.00 — — 2 60 GA2 149.00 — — Compensated 1 3 100 HA2 261.00 — — 4 180 JA2 306.00 — — Three Pole Construction (One Common SPDT Contact on Type S) Non1 26 SEO6B2 392.00 SM2 35.60 3 Compensated 2 45 SEO9B2 441.00 SM2 35.60 1 26 SEO6B 441.00 SM2 35.60 Ambient 3 2 45 SEO9B 441.00 SM2 35.60 TemperatureCompensated For additional selections see International Control Products. a Maximum power contact rating for separate mounting overload relays. Maximum control circuit contact rating for Type S versions is 600 Vac only. Table 16.288: Replacement Overload Relay for Square D Class 8536 Bimetallic Overload Relay on an Existing Starter Order Class 9065 Overload Relay from this Column Locate Class 8536 Starter in this Column NEMA Size Type Series Number of Poles 0 SB A&B Any 1 SC A&B Any 2 SD A Any SE A A B A A B 3 3e 4e b c d e SF Form Type $ Price Bb B1b B2b Bb B1b B2b Bb B1b B2b Y59c SDO6B SDO5B1 SDO6B2 SDO6B SDO5B1 SDO6B2 SDO9B SDO8B1 SDO9B2 26005-11000 441.00 392.00 392.00 441.00 392.00 392.00 512.00 464.00 464.00 243.00 Number of Thermal Units Required 3 2 3 3 2 3 3 2 3 1 SHA01Y59 1089.00 3 Y59c 26005-11500 306.00 1 SJA01Y59 1431.00 3 3 3 3 B2d SEO6B2 392.00 3 5 SG A&B 3 Bd SEO6B 441.00 3 B SEO6B 441.00 3 6 SH A&B 3 B2 SEO6B2 392.00 3 B indicates ambient temperature-compensated bimetallic overload relay. B1 indicates single phase non-ambient temperature compensated bimetallic overload relay. B2 indicates polyphase non-ambient temperature compensated bimetallic overload relay. Y59 indicates single phase ambient temperature compensated bimetallic overload relay. B2Y500 indicates bimetallic overload relay with current transformer sensing. BY500 indicates ambient temperature compensated bimetallic overload relay with current transformer sensing. This part number does not include the current transformer assembly. Non-compensated Size 3 & 4 OLRs are no longer available. Select an ambient compensated OLR from appropriate table above. Table 16.289: Replacement Overload Relay for Square D Class 8940 Pump Panel with IEC Style Bi-metallic Overload Relays Mounted on Current Transformers Number of Form Series Typef Poles 40A-63A 3 B12 B TJF40 63A-100A 3 B12 B TJF63 100A-160A 3 B12 B TJF100 160A-250A 3 B12 B TJF160 f A retro-fit reset kit is required for pre-series B pump panels. See page 16-101 for selection. AMP Range $ Price 428.00 428.00 468.00 468.00 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-98 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Overload Relays—NEMA Rated Class 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us Approximate Dimensions Table 16.290: Melting Alloy Type NEMA Style E Dimensions (IN) I J K L M N O P Shipping Weight (lbs.) 33215/32 31/32 17/32 13/16 7/32 11/16 25/16 1/2 1/2 1/2 27/32 1 1-3/8 #10 1 3215/32 31/32 3-1/2 13/16 3/16 11/16 25/16 1/2 1/2 1/8 27/32 1 1-3/8 #10 1-1/4 17/16 39/16 3/4 9/16 7/8 1-1/2 1-3/4 2 #1/4 3 2-1/8 39/16 3/4 9/16 7/8 1-1/2 1-3/4 2 #1/4 4 Type B C D E F G H SEO5 35/16 — SEO8 35/16 — SEO12 — 519/32 9/16 5-3/4 55/16 4-3/4 9/32 SEO15 — 631/32 9/16 5-3/4 55/16 4-3/4 9/32 H A I K L M .27 6.86 RESET .41 10.4 0.66 16.8 1.38 35 (2) 8-32 Mtg Screws 0.5 12.7 D Prov for (4) - p - Mtg Screws Type SEO 0.31 7.9 .25 6.4 C N O 0.22 5.6 .44 11 2.0 50.8 .28 7 (2) 3/16 Dia Mtg Holes .6 15.2 6.19 157.23 0.38 9.7 4.75 0.22 5.59 RESET .75 .77 19 19.6 Over Thermal Unit 1.34 34 B J .28 7.1 .69 17.5 G Over Thermal Unit A F 0.38 9.65 Reset Travel Tripped Reset Travel Tripped 3.25 82.5 0.94 23.8 3.25 82.5 0.94 1.0 25.4 1.0 25.4 2.75 69.85 5 Dia 16 Locating Dowels (2) 23.9 2.75 69.8 2.93 74.4 2.75 69.8 a 3.25 82.5 0.125 3.18 Type UO1a Weight–11⁄ 2 Lb. Type TO1a Weight–1⁄ 2 Lb. Type CO1 Weight–1⁄ 2 Lb. Tripped 120.7 Reset Travel Dimensions shown for Types TO1 and UO1 do not apply when Form Y342 or Y34 is supplied. 2.13 54 1.06 27 1.06 27 4.06 103 Reset 0.44 Travel 11 1.41 36 1.41 36 4.94 125 0.38 10 3.13 79 9.13 232 1.81 46 R E S E T O.L. C om . Prov for (3) 1/4 - 20 Mtg Screws Terminal Connections 6.03 153 2.63 67 R E S E T 1.81 46 Alarm Com O.L. Left Hand 1.00 25 Dual Dim In. mm 1.00 25 Left Hand Types GO11L and GO11R Weight–5 lbs. Prov for (3)#10-24 Mtg Screws In mm Right Hand 0.47 12 0.47 12 Types FO1L and FO1R Weight–2 lbs. 16 Right Hand Dual Dim Terminal Connections NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Alarm 0.44 Reset 11 Travel 3.02 76 3.88 98 1.56 40 © 2009 Schneider Electric All Rights Reserved 16-99 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Overload Relays—NEMA Rated Class 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us Approximate Dimensions Bimetallic Overload Relays 3.75 95 .50 13 3.50 89 .50 13 2.81 71 2.81 71 3.34 85 2.30 58 3.59 91 2.30 58 Reset Reset .80 20 .80 20 .31 8 .31 Reset Travel 8 Prov. for (4) #10 Mtg. Screws .06 2 1.00 25 .89 23 .06 2 1.00 25 .89 23 3.94 100 .31 8 Reset Travel .31 8 Prov. for (4) #10 Mtg. Screws 3.94 100 Types SEO9B and SEO9B2 Weight—11⁄ 4 Lb. Types SEO6B and SEO6B2 Weight—1 Lb. Table 16.291: Mtg. Dimensions Outline Dimensions Class Ampere 9065 Rating Reset Dimensions Mtg. Approx. Screw Max. Wire Size Shipping Weight (lbs) G A B C D E K L DA 25 3-1/2 7/8 3-3/16 3 1/2 3/8 1/8 10 8 GA 60 4-7/8 7/8 3-3/16 3 1/2 3/8 1/8 10 1 2 HA 100 4-7/8 1-1/4 3-3/16 3-1/2 1/16 1/2 1/8 10 00 3 JA 180 5-15/16 1-1/4 3-3/16 3-1/2 1/2 3/16 1/8 10 250 MCM 4 2 A D J Note: Dimensions shown in inches. Motor Logic® Solid State Overload Relay 2.81 71 .31 8 K G (2 Holes) (2) Holes and (2) Slots for 8-32 Mtg. Screws L Reset Travel E C B 2.23 57 2.69 68 RESET .89 23 1.00 25 1.59 40 .36 9 .24 6 Reset Travel 3.90 99 .27 7 .28 7 3.26 83 NEMA Size 00B, 00C, 0, and 1 Devices Note: NEMA Size 00B and 00C are not actual NEMA sizes. These designations are used to differentiate the lower FLA of these devices from the NEMA size 00 Motor Logic Solid State Overload Relay. 3.91 99 4.28 109 1.70 1.84 43 47 3.51 89 2.19 56 3.24 82 RESET 1.24 31 .24 6 Reset Travel 16 1.24 31 Size 2 Devices NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 5.32 135 .29 7 1.50 38 3.25 83 5.32 135 4.74 120 .29 7 .30 8 1.50 38 3.25 83 4.74 120 4.53 115 .30 8 4.45 113 1.08 27 1.08 27 2.96 75 3.56 90 5.02 128 .31 8 2.96 75 3.56 90 2.26 57 4.16 106 2.26 57 5.92 150 .31 8 4.16 106 RESET RESET .24 6 Reset Travel .24 6 Reset Travel .38 10 1.57 40 3.80 97 1.57 40 5.33 135 Size 3 Devices 16-100 .32 8 .38 10 1.57 40 1.57 40 5.33 135 3.80 97 .32 8 Size 4 Devices © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Overload Relays—NEMA Rated Approximate Dimensions Class 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us 7.38 187 8.25 210 31161-184-51 SERIES B PWR 270 A600 P300 50-60HZ TRIP 5.88 FLA 210 AC 3 Ph 90 180 150 TRIP=125% CLASS10 120 149 SQUARE D COMPANY LISTEDIND.CONT.EQ.A159 MADE IN USA Note: The dimensions are for reference only. 2.25 57 1.18 NEMA Size 5 Type S Device 30 7.75 197 Motor Logic® Plus—Solid State Overload Relay 1.20 30 2.20 56 3.10 4.70 79 119 5.05 2.14 128 2.65 2.03 67 52 54 2.28 58 3.05 77 .70 18 3.60 .25 91 6 3.85 98 .20 5 .34 9 MOTOR LOGIC Plus 4.37 111 External Reset Mechanisms Class 9066 Type W1 Type RB kits make it possible to field install external reset mechanisms to Type S combination starters in NEMA 12 enclosures. They may also be used to replace external reset mechanisms on Type S combination starters in NEMA 1, 4 and 12 enclosures. Table 16.292: Where Used Type RA2 Series B Type of Enclosure W1 28.70 NEMA 1 with slip-on covers SC1 SD1 SE1 7.20 12.00 14.30 NEMA 3R Reset for use with 9065TJF Series B OLR RTJF 42.80 NEMA 1, 12 Replacement on 8538, 8539 starters On commercial enclosures or Type S combination starters NEMA 1, 12 NEMA 4 Retro-fit kit Class 8940 Pump Panel $ Price 57.00 71.00 86.00 42.80 42.80 16 Type SC1 Type RA1 RA2 RA3 RB1 RB2 OEM Kit for commercial enclosures Replacement on Class 8536 Type S starters Reset Mechanism Kit Description With 1 Rod With 2 Rods With 3 Rods Size 0 and 1 Size 2 W1 is a boot only and must be used with RA or RB Kit listed above Size 00, 0 and 1 Size 2 Size 3 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Type RB1 Type RA kits provide a convenient external means for resetting overload relays mounted in control enclosures of almost any depth. Designed for use on NEMA 1, 4 or 12 enclosures, they can be used with any Square D open type magnetic starter or Class 9065 overload relay. All kits are individually packaged for easy stocking and include complete installation instructions. Only a single mounting hole is required in the enclosure door. Each kit contains one or more threaded reset rods, grooved at intervals of 3/4" so they can be cut to the approximate length required without thread damage. Final adjustment is easily made after installation by rotating a plunger and tightening the lock nut. Mechanisms with more than one reset rod include a steel cross bar with mounting holes located at 1/2" intervals, providing a choice of rod locations to suit any application. All steel parts are electrically isolated from the enclosure and the operator. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-101 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures NEMA Type 3R, 4, 4X, and 12 Class 9991 www.schneider-electric.us Separate enclosures can be used with open style devices for field assembly of enclosed controls. These enclosures, plus the open style components, are equivalent to a factory-assembled device. Separate enclosures are to be used only with the equipment listed below: • • • Type SCW21 NEMA 4X Enclosure NEMA 4 and 12 Class 9991 separate enclosures for Type S devices are supplied as standard with closing plates. See selection chart below for specific number of closing plates on Various enclosures. For applications requiring enclosures without closing plates, contact your nearest Square D/Schneider Electric sales office. NEMA 3R enclosures for field assembly of equipment for outdoor applications are provided with three closing plates, a reset mechanism and predrilled panel as standard. For conduit connection to the top of these enclosures, select watertight hubs from listing on Digest page 3-9 in accordance with applicable code requirements. Square D’s NEMA 12 enclosures can also be modified for outdoor use. For details, refer to NEMA 12 enclosure modification information on page 16-104. NOTE: Not for use in highcorrosive outdoor locations or sea coast environments. NEMA 4X enclosures for Type S devices, Sizes 0–2 and 30–60 Ampere, are provided as standard without closing plates. Cover mounted control units for NEMA 4X separate enclosures are available as a factory modification only. When closing plates are removed from NEMAs 4, 12 & 3R enclosure covers, the openings can be used for easy installation of Class 9001 Type K or Type SK cover mounted control units. Convenient Class 9999 modification kits containing Class 9001 Type K control kits can be found on page 16-118. Table 16.293: Enclosure Classification For Use With Class Types (All Pole Arrangements) NEMA Size or Ampere Rating NEMA 4X Watertight, Dusttight and Corrosion-Resistant Glass-Polyester NEMA 4d Watertight and Dusttight Stainless Steel NEMA 3R Rainproof, Sleet Resistant, Outdoor Use NEMA 12/3R f Dusttight and Driptight Type $ Price Type $ Price Number of Closing Plates Type $ Price Number of Closing Plates Type MW1e 485.00 MW11 485.00 — MA1 129.00 — — $ Price Manual Starters 2510 Type SCA11 NEMA 12 Enclosure Type SCW11 NEMA 4 Enclosure MBO, MCO MO M1 M1P — Magnetic Contactors SAO, SBO, SCO 00, 0, 1 SCW20 684.00 SCW11 714.00 2 SCA11 372.00 2 SCH2 372.00 SDO 2 SDW20 1169.00 SDW11 1197.00 2 SDA11 485.00 2 SDH1 485.00 8502a SEO 3 — — SEW11 1767.00 3 SEA11 684.00 3 SEH1 684.00 SFO 4 — — SFW11 3119.00 3 SFA11 1853.00 3 SFH1 1853.00 Magnetic Starters SAO, SBO, SCO 00, 0, 1 SCW21 684.00 SCW11 714.00 2 SCA11 372.00 2 SCH2 372.00 SDO 2 SDW21 1169.00 SDW11 1197.00 2 SDA11 485.00 2 SDH1 485.00 8536 SEO 3 — — SEW11c 1767.00 3 SEA11c 684.00 3 SEH1 684.00 SFO 4 — — SFW11c 3119.00 3 SFA11c 1853.00 3 SFH1 1853.00 Lighting Contactors, Non-Combination, Electrically and Mechanically Held LO, LXO 20 Amp SDW20 1107.00 SDW11 1197.00 2 SDA11 485.00 2 SDH1 485.00 SMO 30 Amp SCW20b 684.00 SCW11 714.00 2 SCA11 372.00 2 SCH2 372.00 8903a SPO 60 Amp SCW20b 1169.00 SDW11 1197.00 2 SDA11 485.00 2 SDH1 485.00 SQO 100 Amp — — SEW11c 1767.00 3 SEA11c 684.00 3 SEH1 684.00 SVO 200 Amp — — — — — — — — SFH1 1853.00 Reversing and Two Speed Horizontally Arranged Contactors and Starters 8702a SBO, SCO 0, 1 — SCW12 1182.00 SCA12 527.00 — — — 3 3 8736 SDO 2 — SDW12 1754.00 SDA12 728.00 — — 8810 SBO & SCO 0, 1 — — SCW13 1610.00 3 SCA13 714.00 3 — — a For contactors, replace reset assembly with proper closing plate; for NEMA 4 use Class 9001 Type K52, for NEMAs 3R and 12 use Class 9001 Type K51. Class 9991 Types SCW20 and SDW20 are designed for contactors only, reset closing plates not required. b For electrically held devices only. c Enclosure suitable for starter with melting alloy and solid state overload relays only. d The standard cabinet has a brushed finish. e Type MBO, Size MO only. f NEMA 12 enclosures may be field modified for outdoor non-corrosive and non-service-entrance-rated applications; see page 16-104 for more information. Table 16.294: How to Order To Order Specify: • • Class Number Type Number Catalog Number Class Type 9991 SCW11 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Type SCH2 NEMA 3R Enclosure 16-102 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures Class 9991 www.schneider-electric.us NEMA Type 1 and Flush Mounting Flush Mounting Selection Table Flush Mounting General Purpose separate enclosures for Type S Sizes 0–2, 30–60 ampere are provided with knock-outs in the cover for field assembly of one Class 9999 push button or selector switch kit and one Class 9999 pilot light kit. (Refer to Class 9999 for selection.) For Type S Size 3, 100 ampere, three closing plates are provided for installation of Class 9001 Type K oiltight control units. For enclosure dimensions, refer to page 16-105. NEMA 1 Selection Table The NEMA 1 General Purpose separate enclosures listed below, when used with open style components, are equivalent to a standard factory assembled control device. Table 16.296: Table 16.295: Class 2510 Types (All Pole Arrangements) MBO & MCO NEMA Size or Amp Rating MO M1 M1P Magnetic Contactors SBO & 0, 1 SCO 8502a SDO 2 SEO 3 Magnetic Starters Mounting Strap Flush Plates Standard Stainless Steelb Pull Box 2510 Type $ Price Type $ Price Type $ Price MF1 215.00 (with pullbox and plaster adjustment) MF2 129.00 (without pullbox but with mounting strap) SCF11 Type Class $ Price 57.00 SCF12 201.00 SCF2 71.00 SCF1 8501 86.00 SBO & 0, 1 SCF11 57.00 SCF12 201.00 SCF2 71.00 SCF1 86.00 SCO SDO 2 SDF11 171.00 SDF12 386.00 SDF2 99.00 SDF1 86.00 Lighting Contactors Non-Combination Electrically and Mechanically Held LO, LXO 20 Amp SDF13 171.00 — — SDF2 99.00 SDF1 86.00 SMO 1–4 30 Amp SCF11 57.00 — — SCF2 71.00 SCF1 86.00 SMO 10–13 30 Amp SCF13 201.00 — — SCF2 71.00 SCF1 86.00 8903a SPO 1–4 60 Amp SDF11 171.00 — — SDF2 99.00 SDF1 86.00 SPO 10–13 60 Amp SDF13 171.00 — — SDF2 99.00 SDF1 86.00 SQO 1–13 100 Amp SEF11 882.00 (Enclosure Complete) a For contactors, replace reset assembly with proper closing plate. For Flush Mounting use Class 9999 Type SG2 except for Class 9991 Type SDF11 which requires a Class 9001 Type K51 or K11 closing plate. Class 9991 Types SEF11 and LF1 are designed for contactors only, reset closing plates not required. b The standard cabinet has a brushed finish. Type SCG8 NEMA 1 Enclosure XO No. of Poles All All All All 2–12, 2–4 w/Attachments 2–8 w/o Attachments Type $ Price EN1 MG1 MG2 UE1c 29.30 57.00 57.00 39.40 UE7 99.00 SAO, SBO, 2–4 SCG7 57.00 SCO SDO 2–4 SDG7 143.00 8502 SEO 2–4 SEG7 287.00 SFO 2–4 SFG8 599.00 SAO, SBO, 2–4 SCG8 57.00 SCO SDO 2–4 SDG8 143.00 8536 SEO 2–4 SEG8d 287.00 SFO 2–4 SFG8d 599.00 SGO 3 SGG8dg 1241.00 SAO, SBO, SCO All SCG9e 171.00 8702, 8736 SDO All SDG9e 372.00 LO, LXO All LXG1h 143.00 SMO All SCG7f 57.00 8903 SPO All SDG7f 143.00 SQO All SFG8 599.00 SVO All SFG4 1259.00 DP 1–2 DPG1 78.00 DPA12, 13, 22, 23, 2–3 DPG1 78.00 32, 33, 42, 43 DPA14, 24, 34, 44, 2–4 DPG2 99.00 52, 53 8910 DPA62, 63 2–3 DPG3 143.00 DPA72, 73, 92, 93, 2–3 DPG4 287.00 122, 123 H, J, K, L & M All UE6 99.00 DPSO13, 23, 33, 43 3 DPSG1 59.00 8911 DPSO53 3 DPSG2 102.00 DPSO63, 73, 93 3 SEG8 287.00 AO All UE6 99.00 (Single Head) 9050 HO All UE6 99.00 EO51, EO61, EO71, K750, — SDG4 458.00 K1000 EO2, EO3, EO4, EO15, EO16 9070 EO18, EO19, — LG1 143.00 T75, T100, T150, T200, T250, T300, T350, T500 EO1, EO17, T50 — UE7 99.00 c CP2 Discount Schedule, not CP1. d Enclosure suitable for starter with melting alloy or solid state overload relay only. e For horizontally arranged Class 8702 contactors replace reset assembly with a Class 9001 Type K51 closing plate. f For electrically held contactors only. See page 16-104 for mechanically held contactors. g Series B starter enclosure. h If cover mounted control units are required, select oversized enclosure listed on page 16-104. 16 Flush Mounting Starter With Pull Box and Mounting Strap Having Plaster Adjustment Feature F and K M–Sizes M0 and M1 M–Size M1P CO XDO SDF11 171.00 SDF12 386.00 SDF2 99.00 SDF1 116.00 SEF11 882.00 (Enclosure Complete) 8536 Type NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Class 9991 Flush Mounting General Purpose (Components) For Use With General Purpose NEMA 1 Enclosure For Use With © 2009 Schneider Electric All Rights Reserved CP1 CP2 Discount Schedule 16-103 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures NEMA Types 1, 4, and Oversize Class 9991 www.schneider-electric.us NEMA 1, 4 and Oversized For Addition of Control Circuit Transformer Type SCW4 NEMA 4 Enclosure The Class 9991 enclosures listed below accept an open type Class 8502 or 8536 Type S, NEMA Size 0, 1, 1P, or 2 contactor or starter along with a fused control circuit transformer (Form F4T) to allow field assembly of enclosed controllers. In the cover of the Class 9991 Type SCG1 enclosure, knock-outs are provided for field addition of Class 9999 cover-mounted control units. All other Class 8502 & 8536 enclosures include a panel with space and drilling for an open-type device and a fused control circuit transformer. In addition, three closing plates are included in each cover for easy installation of Class 9001 Type K or SK control units. Oversized enclosures for open type Class 8903 Type L & LX, 20 A and Type S, 30 and 60 A electrically and mechanically held lighting contactors include a panel with space and drilling for an open- type contactor and fused control circuit transformer (Form F4T) and/or an auxiliary relay for use with single pole pilot devices (Form R6). When an auxiliary relay is required, use a Class 8501 Type XO11 relay. Three closing plates are provided as standard for easy installation of Class 9001 Type K or SK control units. Note: A Class 9991 Type SCG1 NEMA 1 separate enclosure can also be used for Class 8903 Type SMO, 30 A electrically held lighting contactor if Form F4T (control transformer), with or without cover control units is required. Table 16.297: For Use With Class Type SCG1 With Starter, Transformer and Fuse Block Installed NEMA Size or Ampere Rating Type No. of Poles General Purpose NEMA 1 Type $ Price Magnetic Contactors and Starters SAO, 1–3 d SBO 00, 0 & 1 SCG1 270.00 8502 & 4–5 & SCO 8536 SDO 2 2–5 SDG4 458.00 Lighting Contactors, Non-Combination LO, LXO 8903 a b c d e f Recommended Class 9070c Transformer Selection Class 9991 Enclosure 20 A Watertight and Dusttight Stainless Steel NEMA 4e Dusttight and Driptight Industrial Use NEMA 12b Type $ Price Type $ Price SCW4 827.00 SCA4 485.00 SDW4 1488.00 SDA4 Standard Type T50 All VA Fuse Block Extra Capacity 100 VA 150 VA 300 VA Type Type Type 50 VA T100a T150a — 100 VA — T150a — 705.00 T100 100 VA — T150 T300 T50 T50 684.00 T100a 50 VA 50 VA 100 VA — T100a — — T150a T150a — — — T100a Class 9999 Type SFR4 1–3 SDG3 399.00 SDW3 1169.00 SDA3 4–5 T100 100 VA — T150 T300 2–5 SPOf 60 A For mounting in SCG1 enclosure, a Class 9991 Type S1 adapter bracket is also required — $44.00 NEMA 12 modified for outdoor use (see below). For price list and complete description, see the Class 9070 section. Note: Class 9991 Type SCG1 enclosure is provided with a Class 9999 Type SF4 fuse block as standard. For contactors (Class 8502), a separate closing plate is provided with each enclosure to replace the reset mechanism with the exception of Class 9991 Type SCG1 which requires a separate reset closing plate Class 9999 Type SG2 — $14.30 The standard cabinet has a brushed finish. Mechanically held. SMOf 30 A NEMA 12/3R Enclosures Modified for Outdoor Applications (not to be used in salt air or corrosive environments) Type SCA4 NEMA 12 Enclosure Field Modifications for NEMA 3 dusttight, raintight and sleet resistant outdoor applications are as follows: Watertight conduit hubs or equivalent provision for watertight connection at the conduit entrance shall be used. Field Modifications for NEMA 3R rainproof and sleet resistant outdoor applications are as follows: 1. 2. Watertight conduit hubs or equivalent provision for watertight connection at the conduit entrance, when the conduit enters at a level higher than the lowest live part, shall be used. Drain holes of 1/8 inch diameter shall be added to the bottom of the enclosure. Class 9001 Type K oiltight/watertight control units can be easily installed in NEMAs 4, 12, and oversized NEMA 1 separate enclosures provided with closing plates. When installing control units simply remove the closing plates and install the proper Class 9001 Type K components. Convenient control unit kits complete with assembled and pre-wired operators for quick installation are available as Class 9999 user modification kits. See Table 16.298 for contents of each control unit kit. Class 9001 Type SK NEMA 4X corrosion resistant control units may be used as an alternate. Table 16.298: Control Unit Selection Table 16 Class 9999 Type NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-104 Kit Contents Control Function Class & Type Description Start Operator Stop Operator Start Legend Plate Stop Legend Plate Contact Block Selector Operator Switch Hand-Off-Auto Legend Plate Contact Block Red Pilot Light SA3 Start-Stop Pushbutton SC8 Hand-Off-Auto Selector Switch 1-9001 KR1B 1-9001 KR1R 1-9001 KN201 1-9001 KN202 2-9001 KA1 1-9001 KS43B 1-9001 KN260 1-9001 KA1 SP28R Pilot Light (120 V) 1-9001 KP1R31 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures Approximate Dimensions Class 9991 www.schneider-electric.us Table 16.299: NEMA 1—General Purpose Enclosures (Standard) For Use With Class 9991 Type Class Type LXG1 8903 LO, LXO DPG1 8910 8903 SCG7 8502 SCG8 8536 DPG2 DPSG1 8910 8911 8903 8502 8536 8910 8911 8502 8536 8911 SDG7 SDG8 DPG3 DPSG2 SEG7 SEG8 DPG4 DP DPA SMO (E.H.) SAO SBO SCO SAO SBO SCO DPA DPS SPO (E.H.) SDO SDO DPA DPS SEO SEO DPSG63 to 93 8910 DPA Dimensions (inches/millimeters) Size No. of Poles Fig. No. Mounting Screws (in.) A B C D E F G H I J K L Weight (lbs.) 20 A 2–12 1 — 7.81 198 4.85 123 12.69 322 8.5 216 6.03 153 4.03 102 — 1.09 28 .109 3 10.50 267 5.75 146 1.09 28 .531 13 1.09 28 .92 23 5.63 143 3.00 76 5.75 146 3.75 95 1.09 28 5.63 143 8 2.42 62 — — 2 3.00 76 .88 22 8.13 206 1.00 25 .94 24 4.13 105 5.00 127 — — 4 — 1.09 28 10.50 267 1.09 28 1.09 28 5.63 143 5.75 146 1.09 28 5.63 143 8 — 1.53 39 18.75 476 1.53 39 1.53 39 8.38 213 7.75 197 1.53 39 8.38 213 23 8.99 228 8.60 218 1.25 32 1.25 32 22.31 567 1.42 36 .44 11 — — — 34 7.41 188 9.75 248 1.06 27 1.06 27 9.75 248 1.06 27 .31 8 — — — 16 7.56 192 12.75 324 1.06 27 1.06 27 12.00 305 1.06 27 .31 8 — — — 24 1–2 1–3 All 2–3 20–40 A 30 A 00 0 1 00 0 1 — — 60 A 2 2 — — 3 3 — 1 (4)#10 5.28 134 All 2–3 1 6.00 152 (3)#10 10.00 254 All — — 2–12 All All — — All All All — 5.56 141 6.03 153 1 (4)1/4 7.81 198 1 (4)3/8 11.44 291 12.69 322 21.81 554 8.00 203 8.38 213 — 8502 8536 SFO 4 All SFO 4 All 11.25 25.15 2 (4)7/16 286 639 SQO 8903 100 A All (E.H. & M.H.) SBO, 8702a 0&1 SCO 11.88 11.88 All 2 (4)5/16 SCG9 302 302 ETBC20, 8922 — ETBC36 8702a SCO 2 14.88 14.13 SDG9 All 2 (4)5/16 378 359 8922 ETBC60 — a Standard enclosure has space for a fused control transformer, Form F4T, on Sizes 0–2. SFG8 6.31 160 Table 16.300: NEMA 1—General Purpose Enclosures (Oversize) For Use With Class 9991 Type Class SDG3 8903 8502 8536 SDG4 9070 8502 SCG1 8536 8903 Type Size No. of Poles LO, LXO SMO (M.H.) SPO (Form F4T) SDO (Form F4T) SDO (Form F4T) EO51, EO61, EO71, T750, T1000 SBO, SCO (Form F4T) SBO, SCO (Form F4T) SMO (E.H.) (Form F4T) 20 A 30 A 60 A All 2 All Fig. No. Mounting Screws (in.) A B C E F G H Weight (lbs.) I 15 7.56 192 2 14.88 378 (4)5/16 14.13 359 All 7.66 194 — — 7.56 192 0, 1 All 0, 1 All 30 A All 2 D 3 6.34 161 (4)9/32 15.88 403 5.19 132 12.75 324 1.06 27 1.06 27 12.00 305 1.06 27 .31 8 21 4.66 118 .84 21 14.38 365 .75 19 .28 7 .35 9 8 H A D C K L K (4) I Dia. Mtg. Holes A J H E F NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS B Pilot Light G B G B RESET RESET H G H I E H F Figure 2 C E D C A (4) I Dia. Mtg. Holes Figure 3 16 Figure 1 D © 2009 Schneider Electric All Rights Reserved 16-105 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures Approximate Dimensions Class 9991 www.schneider-electric.us Table 16.301: NEMA 1—General Purpose Enclosures For Use With Class 9991 Type Class UE1 Dimensions (See Figure 4) Weight (lbs.) Type No. of Poles A B C D E F G H 8501 CO All 3.63 92 5.28 134 3.31 84 1.88 48 3.63 92 1.06 27 1.50 38 1/4 in.a 8910 H, J, K L&M AO (Single Head) HO All 4.91 125 5.75 146 5.53 140 3.50 89 4.38 111 1.56 40 2.00 51 9/32 in. 1.31 33 1.88 48 #10 1/2–3/4 in. 4 1.31 33 1.88 48 9/32 in. 1/2–3/4–1 in. b 10 UE6 9050 All All 2–12, 2–4 w/Attachments 2–8 XO 4.87 7.79 7.53 3.50 6.38 XDO 124 198 191 89 162 EO1, EO17 9070 — T25, & T50 EO2, EO3, EO4, EO15, EO16, EO18, EO19 7.53 9.78 5.91 6.13 8.38 LG1 9070 T75, T100, T150, — 191 248 150 156 213 T200, T250, T300, T350, & T500 a Class 9991 UE1 has only (3) -H diameter mounting holes; 2 in the bottom as shown and 1 centered at the top. b Class 9999 LG1 has three knockouts, top and bottom. 8501 UE7 J L 1/2–3/4 in. 1/2–3/4 in. 1–1-1/4 in. 2 1/2–3/4 in. 2 Table 16.302: NEMA 3R—Rainproof & Sleet-Resistant Enclosures Class 9991 Type SCH2 SDH1 SEH1 SFH1 For Use With Dimensions (see Figure 5) No. of Poles A B C D1 D2 E F G1 G2 H1 H2 J K L M N P All 8.83 224 12.30 312 7.12 181 1.39 35 1.44 37 6.00 152 7.50 191 2.61 66 2.19 56 2.08 53 2.62 66 14.28 363 1.37 35 1.37 35 1.88 48 4.38 111 1.83 46 All 9.83 250 16.30 414 8.62 219 1.39 35 1.44 37 7.00 178 11.50 292 2.61 66 2.19 56 2.08 53 2.62 66 16.78 426 1.31 33 1.75 44 2.13 54 4.88 124 1 1.83 1-1/4 46 1-1/2 1/2 3/4 All 12.63 321 25.30 643 8.62 219 1.39 35 1.44 37 10.00 254 20.60 523 2.61 66 2.19 56 2.08 53 2.62 66 19.78 502 1.31 33 2.31 59 2.69 68 6.38 162 1 1.83 1-1/4 46 2 2-1/2 1/2 3/4 12.63 321 40.30 1024 9.12 232 1.39 35 1.44 37 10.00 254 35.50 902 2.61 66 2.19 56 2.08 53 2.62 66 20.28 515 1.31 33 2.31 59 2.69 68 6.38 162 1 1.83 1-1/4 46 2 2-1/2 1/2 3/4 Class Type Size 8502 8536 SBO, SCO 0, 1 8903 SMO 30 Amp 8502 8536 SDO 2 8903 LO LXO 8903 SPO 20 Amp 60 Amp 8502 8536 SEO 3 8903 SQO 100 Amp 8502 8536 SFO 4 All 8903 SVO 200 Amp 2-3 K.O. K.O. X Y 1/2 3/4 1 1/2 3/4 1 A D1 E D2 C N P G1 A F B E B G2 16 (4) .36 Dia. Mtg. Holes 9 (3) Closing Plates (4) H Dia. Mtg. Holes D "J" KO Top and Bottom J NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS M "L" KO Top and Bottom M X X C Y K L F G H1 G 2 H2 Figure 5 Figure 4 16-106 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures Approximate Dimensions Class 9991 www.schneider-electric.us Table 16.303: NEMA 4X—Watertight and Corrosion Resistant Enclosures Class 9991 Type For Use With Class Type Size No. of Poles 8903 SMO (E.H.) SBO, SCO SBO, SCO LO, LXO SPO (E.H.) SDO SDO 30 Amp All 0, 1 All SCW20 8502 SCW21 Dimensions (see Figure 6) 8536 8903 SDW20 8903 SDW21 8502 8536 0, 1 All 20 Amp 60 Amp 2 2 All All Hub Dia. Top & Bot. X Weight (lbs.) A B C D E F G H I J K L Bot. Only W 6.50 165 6.44 164 12.13 308 .75 19 5.00 127 8.25 210 1.69 43 3.34 85 10.06 256 1.31 33 2.13 54 .31 8 3/4 in. 1 in. 7 8.50 216 7.06 179 13.88 352 .75 19 7.00 178 10.50 267 1.69 43 3.91 99 11.94 303 1.63 41 2.38 60 .31 8 3/4 in. 1-1/2 in. 13 All All Table 16.304: NEMA 4—Watertight Enclosures (Standard) Class 9991 Type SCW11 SDW11 SEW11 SFW11 For Use With Dimensions (see Figure 6) Hub Dia. Top & Bot. X Weight (lbs.) Class Type Size No. of Poles A B C D E F G H I J K L Bot. Only W 8903 8502 SMO SBO, SCO 30 Amp 0, 1 All All All 1.56 40 1.56 40 3.25 83 3.25 83 12.00 305 12.00 305 .59 15 .59 15 1.88 48 1.88 48 11.78 299 11.78 299 1.63 41 1.63 41 2.31 59 2.31 59 .31 8 .31 8 12 0, 1 13.19 335 13.19 335 1 in. SBO, SCO 7.13 181 7.81 198 3/4 in. 8536 6.38 162 6.38 162 8903 8903 8502 LO, LXO SPO SDO 20 Amp 60 Amp 2 All All All 8.13 206 7.88 200 16.19 411 1.56 40 5.00 127 15.00 381 1.09 28 1.94 49 14.75 375 2.00 51 2.63 67 .31 8 3/4 in. 1-1/2 in. 18 8536 SDO 2 All 8.13 206 8903 8502 8536 8536 SQO SEO SEO SFO 100 Amp 3 3 4 All All All All 18.15 461 8.56 217 8.77 223 16.19 411 32.21 818 1.56 40 3.08 78 5.00 127 12.00 305 15.00 381 30.50 775 1.09 28 .86 22 2.88 73 3.67 93 14.75 375 26.71 678 2.00 51 2.58 66 2.63 67 3.19 81 .31 8 .44 11 All 3.08 78 3.08 78 12.00 305 12.00 305 30.50 775 30.50 775 .86 22 .86 22 4.48 114 3.67 93 26.71 678 26.71 678 2.58 66 2.58 66 3.19 81 3.19 81 .44 11 .44 11 51 4 32.21 818 32.21 818 2-1/2 in. SFO 9.58 243 8.77 223 3/4 in. 8502 18.15 461 18.15 461 Table 16.305: NEMA 4—Watertight Enclosures (Oversize) For Use With Dimensions (see Figure 7) Class 9991 Type Class Type Size No. of Poles SCW2 8702 8736 SCO 1 All SCW3 8810 0 1 All SCW4 8502 8536 8702 8736 SBO SCO SBO, SCO (Form F4T) 0, 1 All SDO 2 All LO, LXO SMO, SPO (Form F4T) SDO (Form F4T) 20 Amp 30 Amp 60 Amp All 2 All SDW3 8903 SDW4 8502 8536 D A E A B C D E F G H I J K L 12.63 321 7.81 198 14.69 373 2.56 65 7.50 191 13.50 343 .59 15 3.88 98 18.41 468 1.66 42 2.31 59 .31 8 G F Weight (lbs.) 23 3/4 in. 1 in. 19 24 25 14.88 378 7.25 184 16.19 411 2.56 65 9.75 248 15.00 381 .38 10 3.88 98 20.88 530 1.72 44 2.63 67 .31 8 3/4 in. 1-1/2 in. 29 28 A E D D Top & Bot. X D G B B F C C NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS SDW2 Hub Dia. Bot. Only W G G (4) L Dia. Mtg. Holes I I W X W X J H H K K Figure 7 16 Figure 6 J © 2009 Schneider Electric All Rights Reserved 16-107 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Separate Enclosures Class 9991 www.schneider-electric.us Approximate Dimensions Table 16.306: NEMA 12/3R—Dusttight and Driptight Enclosures (Standard) For Use With Class 9991 Type SCA11 SDA11 SEA11 SFA11 Class Type 8502 8536 8903 8502 8536 8903 8903 8903 8502 8536 8536 SBO, SCO SBO, SCO SMO SDO SDO LO, LXO SPO SQO SEO SEO SFO 8502 SFO D Dimensions (see Figure 8) No. of Poles 0, 1 All 0, 1 All 30 Amp All 2 All 2 All 20 Amp All 60 Amp All 100 Amp All 3 All 3 All 4 All A B C D E F G H I J Weight (lbs.) 6.38 162 8.53 217 12.75 324 1.56 40 3.25 83 12.00 305 .38 10 3.56 90 12.50 318 .31 8 10 8.13 206 9.28 236 16.00 406 1.56 40 5.00 127 15.00 381 .50 13 3.56 90 15.38 391 .31 8 15 18.15 461 9.24 235 31.50 800 3.08 78 12.0 305 30.50 775 .50 13 3.67 93 26.71 678 .44 11 18.15 461 18.15 461 9.58 243 9.24 235 31.50 800 31.50 800 3.08 78 3.08 78 12.0 305 12.0 305 30.50 775 30.50 775 .50 13 .50 13 4.48 114 3.67 93 26.71 678 26.71 678 .44 11 .44 11 Size 4 All A E D G F C G B (4) J Dia. Mtg. Holes 51 I H Figure 8 Table 16.307: NEMA 12/3R—Dusttight and Driptight Enclosures (Oversized) For Use With Dimensions (see Figure 9) Class 9991 Type Class Type Size No. of Poles SCA2 8702 8736 SCO 1 All SCA3 8810 0 1 All SCA4 8502 8536 SBO SCO SBO, SCO (Form F4T) 0, 1 All 19 SDA2 8702 8736 SDO 2 All 24 LO, LXO SMO, SPO (Form F4T) SDO (Form F4T) 20 Amp 30 Amp 60 Amp All 2 All SDA3 8903 SDA4 8502 8536 A B C D E F G H I J D Weight (lbs.) A E D G 17 F 11.88 302 7.75 197 13.5 343 2.56 65 6.75 171 12.75 324 .38 10 3.66 93 18.13 460 .31 8 C 18 G B (4) J Dia. Mtg. Holes 14.88 378 7.88 200 16.00 406 2.56 65 9.75 248 15.00 381 .50 13 3.66 93 21.25 540 .31 8 27 I 27 H Figure 9 Table 16.308: Flush Mounting General Purpose Enclosures Class 9991 Type SDF13 (w/SDF1 & SDF2) SCF11 (w/SDF1 & SDF2) SDF11 (w/SDF1 & SDF2) 16 SEF11 For Use With Class Type Dimensions (see Figure 10) Size A B C D E F G H 15.19 386 8.94 227 7.63 194 12.88 327 5.44 138 10.94 278 5.13 130 .38 10 17 13.44 341 7.19 183 5.88 149 11.13 283 4.75 121 9.19 233 4.50 114 .38 10 10 15.19 386 8.94 227 7.63 194 12.88 327 5.44 138 10.94 278 5.13 130 .38 10 17 31.00 787 16.75 425 14.25 362 26.25 667 8.00 203 — — .18 5 48 8903 LO, LXO 20 Amp All 8502 8536 SBO, SCO SBO, SCO SMO (E.H.) SDO SDO SPO (E.H.) SEO SQO 0, 1 0, 1 All All 30 Amp All 2 2 All All 60 Amp All 3 100 Amp All All 8903 8502 8536 8903 8502 8903 Weight (lbs.) No. of Poles C H H E A G D F B Figure 10 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-108 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Factory Modifications (Forms) For Full Voltage Contactors and Starters www.schneider-electric.us Factory installed modifications are available for the classes of control equipment listed in the respective tables. Prices shown are additions to standard equipment prices and are not to be used as separate selling prices. Kits are also available for many field modifications and normal parts replacement on most control items. Refer to Classes 9998 and 9999 for complete listings. Standard equipment dimensions and enclosure construction may not apply when certain special features are added. Such cases should be referred to the factory with complete description when accurate dimensions are required. NOTE: If UL label is required, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). Some Forms are not UL Listed. Table 16.309: Full Voltage Starters Factory Modifications NEMA Size Enclosure Type Form 1g, 3R, 4, 4X, 12 7&9 1g, 3R, 4, 4X, 12 A A A16 Start-Stop push button and Hand-Off-Auto selector switch 1g, 3R, 4, 4X, 12 AC — 671.00 671.00 671.00 671.00 671.00 671.00 671.00 671.00 On-Off 1g, 3R, 4, 4X, 12 A3 — 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 1, 3R, 4, 4X, 12 A11 — 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 1g, 3R, 4, 4X, 12 7&9 1g, 3R, 4, 4X, 12 7&9 1, 3R, 4, 12 C C C6 C6 G12d — — — — — 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 336.00 599.00 336.00 599.00 30.00 1, 3R, 4, 12 G122 — 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 1, 3R, 4, 4X, 12 Xf 158.00 158.00 158.00 158.00 158.00 158.00 158.00 158.00 158.00 High-Low-Stop 1, 4, 4X, 12 7, 9 1, 4, 12 A1 A1 A2 — 570.00 570.00 570.00 570.00 570.00 570.00 570.00 570.00 — 1017.00 1017.00 1017.00 1017.00 1017.00 1017.00 1017.00 1017.00 — 570.00 570.00 570.00 570.00 570.00 570.00 570.00 570.00 Fast-Off-Slow 1, 4, 12 A9 — 570.00 570.00 570.00 570.00 570.00 570.00 570.00 570.00 High-Low push button and Hand-Off-Auto selector 1, 4, 12 A10C — 671.00 671.00 671.00 671.00 671.00 671.00 671.00 671.00 1, 4, 4X, 12 A11 — 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 1g, 4, 4X, 12 7&9 1g, 4, 4X 7&9 C C C6 C6 — — — — 336.00 599.00 336.00 599.00 C7 224.00 C14 — High-Low and Hand-Off-Auto 1, 4, 12 1, 4, 4X, 12 7&9 1, 4, 12 CC17 — 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 336.00 599.00 336.00 599.00 336.00 336.00 599.00 671.00 Slow-Fast 1, 4, 4X, 12 C19 — 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 Forward-Reverse 1, 4, 4X, 12 C20 — 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 High-Low-Off-Auto 1, 4, 12 C25 — 671.00 671.00 671.00 671.00 671.00 671.00 671.00 671.00 00 0 1 2 3 4 5 6 7 336.00 599.00 378.00 336.00 599.00 378.00 336.00 599.00 378.00 336.00 599.00 378.00 336.00 599.00 378.00 336.00 599.00 378.00 336.00 599.00 378.00 336.00 599.00 378.00 Push Buttons a Start-Stop PILOT DEVICES IN COVER Full Voltage NonReversing Controllers Only Classes 8502 8536 8538 8539 Start-Stop (maintained contact)e Single Oiltight Pushbutton (specify marking) Selector Switches Hand-Off-Auto On-Off NON-STANDARD markings for Pilot Devices Addition of padlock attachment to Class 9001 operators Pilot Lights (specify color/type) b See Table 16.310 below. With Operating Interlock: Add price of each interlock per light Push Buttons a Forward-Reverse-Stop PILOT DEVICES IN COVER Full Voltage Reversing and Multi-Speed Controllers Only Classes 8702 8736 8738 8739 8810 8811 8812 a b c d e f g — — — Single Oiltight Pushbutton (specify marking) Selector Switches Hand-Off-Auto On-Off High-Off-Low Forward-Off-Reverse NON-STANDARD markings for Pilot Devices Any G12d — 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 Pilot Lights b With Operating Interlock: 1, 4, 4X, 12 Xf 158.00 158.00 158.00 158.00 158.00 158.00 158.00 158.00 158.00 Add price of each interlock per light All push buttons are momentary contact unless specified otherwise. Indicate pilot light color as Form P1 (red) or Form P2 (green), etc. as shown in the table below. Unless otherwise requested, standard practice is to wire red pilot light to indicate device is energized. No additional auxiliary contact is required. Also, standard practice is to wire green pilot light to indicate device is de-energized. An additional normally closed auxiliary contact is supplied. A wiring diagram must be supplied for other pilot light colors and/or arrangements. Pilot lights available at 120 to 600 V only. Specify marking and/or Class 9001 Type KN or Type SKN legend plate required. Specify appropriate Class 9001 Type K or SK operator required. To determine the maximum number of auxiliary contacts which can be added to each Type S device and for the appropriate “X Form”, refer to the tables in the Class 8536 section on page 16-14 (for non-reversing single-speed devices) or the Class 8736 section on page 16-51 (for reversing or two-speed devices). For Class 8600 Reduced Voltage controllers, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). Various form combinations selected may force the use of a larger enclosure. Table 16.310: Pilot Light Forms Push-to-Test Ty 7/9 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 1197.00 1197.00 1796.00 1796.00 Form P21 P81 P28 P82 P22 P29 P23 P24 P25 P26 P27 P83 P84 P85 P86 Ty 1/4/12 435.00 435.00 435.00 435.00 435.00 435.00 435.00 435.00 435.00 435.00 435.00 870.00 870.00 1305.00 1305.00 LED Ty 7/9 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 1197.00 1197.00 1796.00 1796.00 Form P51 P91 P58 P92 P52 P59 P53 P54 P55 P56 P57 P93 P94 P95 P96 Ty 1/4/12 383.00 383.00 383.00 383.00 383.00 383.00 383.00 383.00 383.00 383.00 383.00 765.00 765.00 1184.00 1184.00 LED-Push-to-Test Ty 7/9 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 1197.00 1197.00 1796.00 1796.00 Form P42 P43 P44 P45 P46 P47 P63 P64 P48 P66 P67 P77 P78 P79 P80 Ty 1/4/12 482.00 482.00 482.00 482.00 482.00 482.00 482.00 482.00 482.00 482.00 482.00 963.00 963.00 1445.00 1445.00 Ty 7/9 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 599.00 1197.00 1197.00 1796.00 1796.00 16 Red ON Red OFF Red Unwired Green ON Green OFF Green Unwired Amber Clear Yellow Blue White Red LOW - Green HI Green LOW - Red HI Red OFF - Green FWD/REV Green OFF - Red FWD/REV Ty 1/4/12 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 336.00 672.00 672.00 1008.00 1008.00 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Standard Form P1 P71 P38 P72 P2 P39 P3 P4 P35 P36 P37 P73 P74 P75 P76 © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-109 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Factory Modifications (Forms) Class 8536 www.schneider-electric.us For Full Voltage Contactors and Starters Table 16.311: Full Voltage Controllers Only Classes 8502, 8536, 8538, 8539, 8702, 8736, 8738, 8739, 8810, 8811 and 8812 Enclosure Type Factory Modifications Form NEMA SIZE 00 3 4 5 6 7 Separate Control Circuit— No No No No No No No No (specify Any Sa Charge Charge Charge Charge Charge Charge Charge Charge voltage and frequency) Fused Control Circuit (without control transformer) One fuse 1, 3R, 4, 4X, 12 F 314.00 314.00 314.00 314.00 314.00 314.00 314.00 — — Two fuses 1, 3R, 4, 4X, 7, 9, 12 F4 314.00 314.00 314.00 314.00 314.00 314.00 314.00 — — CONTROL Control Circuit Transformersb—Standard capacity (50 or 60 Hz) Note: All orders requesting Form FT will be supplied as Form F4T. CIRCUIT FUSES Full Voltage Primary Secondary and 2 0 1, 4, 4X, 12 F4Tf 386.00 386.00 386.00 543.00 797.00 968.00 1097.00 c 1097.00 1097.00 Multi-Speed 2 0 7&9 F4Tf 441.00 441.00 441.00 741.00 1070.00 1326.00 1524.00 c 1524.00 1524.00 Controllers Only 1 1h 1, 4, 4X, 12 FF1T 698.00 698.00 698.00 855.00 1112.00 1283.00 1412.00 c 1412.00 1412.00 Classes 2 1 1, 4, 4X, 12 FF4T 698.00 698.00 698.00 855.00 1112.00 1283.00 1412.00 c 1412.00 1412.00 8502 2 1 7&9 FF4T 755.00 755.00 755.00 1053.00 1353.00 1640.00 1839.00 c 1839.00 1839.00 8536 1 2h 1, 4, 4X, 12 F1F10T 698.00 698.00 698.00 855.00 1112.00 1283.00 1412.00 c 1412.00 1412.00 8538 2 2 1, 4, 4X, 12 F4F10T 698.00 698.00 698.00 855.00 1112.00 1283.00 1412.00 c 1412.00 1412.00 8539 8702 Additional Capacity (50 or 60 Hz) 8736 Two fuses in primary 8738 8739 100 VA additional capacity 1, 4, 4X, 12 F4T11g 684.00 684.00 684.00 882.00 1112.00 — e — e 1395.00 1395.00 8810 100 VA additional capacity 7&9 F4T11g 741.00 741.00 741.00 1083.00 1353.00 — e — e — — 8811 1, 4, 4X, 12 F4T12g 926.00 926.00 926.00 1155.00 — e — e — e 1524.00 1524.00 200 VA additional capacity 8812 Two fuses in primary and one fuse in secondary 100 VA additional capacity 1, 4, 4X, 12 FF4T11 998.00 998.00 998.00 1197.00 1425.00 1566.00 c 1710.00 c 1710.00 1710.00 100 VA additional capacity 7&9 FF4T11 1053.00 1053.00 1053.00 1395.00 1668.00 1925.00 c 2138.00 c — — 200 VA additional capacity 1, 4, 4X, 12 FF4T12 1241.00 1241.00 1241.00 1467.00 1695.00 c 1839.00 c 1839.00 c 1839.00 1839.00 300 VA additional capacity 1, 4, 4X, 12 FF4T13 1481.00 1481.00 c 1481.00 c 1737.00 c 1967.00 c 2109.00 c 2109.00 c 2109.00 2109.00 400 VA additional capacity 1, 4, 4X, 12 FF4T14 1967.00 1967.00 c 1967.00 c 2280.00 c 2507.00 c 2793.00 c 2793.00 c 2793.00 c 2793.00 c 500 VA additional capacity 1, 4, 4X, 12 FF4T15 2250.00 2250.00 c 2250.00 c 2564.00 c 2793.00 c 3077.00 c 3077.00 c 3077.00 c 3077.00 c a All combination style devices such as 8538, 8539, 8738, 8739, that use Form S should also use Form Y74 (auxiliary contact installed on disconnect switch) per NEC Article 430-74. b Table 16.314 at right. c Single primary voltage must be specified. d Not available on Size 2 or Size 3 devices with 4- or 5-poles. e Not available on this Size. Select appropriate transformer with secondary fuse protection. f Not available with 24 V secondary on Size 3. Select appropriate transformer with bSelection of Control Circuit Transformers secondary fuse protection. See Table 16.314 for 24 V secondary restrictions. g Not available with 24 V secondary. Select appropriate transformer with secondary fuse The standard primary/secondary voltages for control circuit transformers protection. See Table 16.314 for 24 V secondary restrictions. are indicated in the following table. h Single phase with one leg grounded or grounded B phase applications ONLY. 8502 8536 8538 8539 8702 8736 8738 8739 8810 8941 1 Factory Modification Enclosure Type Form AC-OPERATED DEVICES With Control Transformers $ Price Voltage Modification of standard device for use as marine control per UL508 12/3R 4/4X (S.S. only) M10 See Below Table 16.313: Form M10 i j 2 Table 16.314: Table 16.312: Marine Control Class 0 NEMA Sizei 00j — 0j — 1 338.00 2 450.00 3 720.00 4 1260.00 5 3015.00 6 4725.00 Not available for NEMA Size 7. Cannot be used with Marine controls. k 60 Hz (Primary–Secondary) 120–12k 120–24k 208–120 240–24k 240–120 277–120 480–24k 480–120 480–240 600–120 Specify 12 V coils are not available on Sizes 3–7. 24 V coils are not available on Sizes 4–7. Code V88 V89 V84 V82 V80 V85 V83 V81 V87 V86 V99 16 To order, select the desired device with the appropriate transformer Form designation. Then convert the previously selected voltage code (V• •) to reflect the desired primary/secondary voltage for the transformer. The secondary voltage should equal the previously selected coil voltage of the device. Example: NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS You have previously selected a Class 8536SDG1V02S. V02S means that you need a coil voltage of 120-60/110-50 wired for separate control. You would like to add Form FF4T with the transformer voltages being 480 volt primary, 120 volt secondary with Solid State Overload Relay Protection Class 20 Trip Class (H20). The new and complete class, type, voltage code and form number will be: l 16-110 CP1 Discount Schedule Class Type Voltage Code Form l 8536 SDG1 V81 FF4H20T Form numbers should always be shown in alphabetical order. Each letter indicates the beginning of a new form and may be followed by one or more numbers. © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Factory Modifications (Forms) For Full Voltage Contactors & Starters and Solid State Overload Relays www.schneider-electric.us Class 8502, 8536, 8538, 8539, 8702, 8736, 8738, 8739, 8810, 8811 and 8812 Table 16.315: Full Voltage Controllers Only Classes 8502, 8536, 8538, 8539, 8702, 8736, 8738, 8739, 8810, 8811 and 8812 Factory Modifications Form Any B1 — 35.60 35.60 Any B1 — 35.60 Any Any Any B2 B2 B2 — — — 1, 4, 7, 9, 12 Any Any Any B Y59 B B — — — — Non-Compensated Bimetallic Overload Relays Single Phase: Types SB–SD (Sizes 0–2)b Overload Relays a b c Polyphase: Two Element—For 2 Phase Only Types SB–SD (Sizes 0–2) Three Element Types SB–SD (Sizes 0–2) Type SG (Size 5) Type SH (Size 6) Ambient Compensated Bimetallic Overload Relays Three Element Types SB–SD (Sizes 0–2) Types SE–SF (Sizes 3 & 4) Type SG (Size 5) Type SH (Size 6) NEMA Size Enclosure Type 00 0 1 2 3 4 5 6 7 35.60 — — — — — 35.60 35.60 — — — — — 35.60 — — 35.60 — — 35.60 — — — — — — — — — 35.60 — — — 35.60 — — — a 64.00 — — — 64.00 — — — 64.00 — — — — 64.00 — — — 64.00 — — — — 64.00 — — — — 64.00 — — — — a — N/C — — — — 179.00 179.00 179.00 179.00 c 179.00 — a 179.00 179.00 179.00 179.00 c 179.00 — a Overload Relays—General Any Y81 — — — Modify Size 3 Type SE starters with melting alloy overload relays to accept Type FB quick trip or SB slow trip thermal units Substitute 9999 SO4 isolated alarm contact (N.O.) Any Y342 179.00 179.00 179.00 on melting alloy overload relay Substitute 9999 SO5 isolated alarm contact (N.C.) Any Y344 179.00 179.00 179.00 on melting alloy overload relay Size 7 uses a solid state overload relay as standard. See Class 8536 for complete details. Single phase bimetallic overload relays for Type S Sizes 0–2 require two (2) thermal units per starter. For Classes 8736, 8738 and 8739 Type SG, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). Accessories available on page 16-120. Solid State Overload Relay Factory Modifications (Forms) The solid state overload relay is available on NEMA Size 00–7. For Class 8536, 8538, 8539, 8736, 8738, 8739 and 8810 devices. H Form Description Type S Starter with MOTOR LOGIC® Solid State Overload Relay 1—MOTOR LOGIC, Base Unit, Trip Class 10 2—MOTOR LOGIC, Base Unit, Trip Class 20 3—MOTOR LOGIC, Feature Unit # # # 0—No additional modifications 1—N.O. Auxiliary Contact (Field Convertible to N.C.) Special Overload/Contactor Size Combinations (Base Unit & Feature Units): (Must Be Specified On Size 00 Starter Orders) Blank -Overload Matched to Starter Size (i.e., Size 1 contactor & 9-27 A overload) 0—A 6–18 A overload on a starter size as indicated by the Starter Catalog Number 1—A 9–27 A overload on a starter size as indicated by the Starter Catalog Number 2—A 15–45 A overload on a starter size as indicated by the Starter Catalog Number 3—A 30–90 A overload on a starter size as indicated by the Starter Catalog Number 4—A 45–135 A overload on a starter size as indicated by the Starter Catalog Number 8—A 1.5–4.5 A overload on a starter size as indicated by the Starter Catalog Number (only offered on Feature Units) 9—A 3–9 A overload on a starter size as indicated by the Starter Catalog Number SPECIAL NOTE for Class 8810 devices: You MUST SPECIFY TWO SEPARATE FORM NUMBERS TO GET MOTOR LOGIC OVERLOADS ON TWO SPEED STARTERS. The first form number is for the low speed winding and the second is for the high speed winding. EXAMPLE: Open Style, Size 4 Two Speed Starter with MOTOR LOGIC Overload Relays Required. Single Winding, 460 V, Constant or Variable Torque High Speed FLA = 96 A Low Speed FLA = 27 A (use Size 2 Overload) Catalog Number to Order: 8810 SF01V02 H202 H20S Where: Form H20 is a Size 4 Contactor with a 45-135 A MOTOR LOGIC Overload Relay for the High Speed and form H202 is a 15–45 A MOTOR LOGIC Overload Relay on the low speed contactor. Table 16.316: Classes 8536, 8538, 8539, 8736, 8738, 8739 and 8810 MOTOR LOGIC Solid State Overload Relay MOTOR LOGIC Solid State Overload Relay with Auxiliary Contact Base Unit, Trip Class 10 Base Unit, Trip Class 20 Feature Unit Base Unit, Trip Class 10 Base Unit, Trip Class 20 Feature Unit Form H10 H20 H30 H11 H21 H31 00 0 1 2 3 4 5 6 7 3–9 A 6–18 A 9–27 A 15–45 A 30–90 A 45–135 A 90–270 A 180–540 A 270–810 A 64.00 64.00 93.00 122.00 122.00 149.00 64.00 64.00 93.00 122.00 122.00 149.00 64.00 64.00 93.00 122.00 122.00 149.00 64.00 64.00 102.00 122.00 122.00 161.00 64.00 64.00 116.00 122.00 122.00 171.00 64.00 64.00 131.00 122.00 122.00 188.00 64.00 64.00 215.00 122.00 122.00 270.00 — — 215.00 — — 270.00 — — Std. — — 56.00 Table 16.317: Special Starter Combinations with MOTOR LOGIC Overload Relay Protection 3 4 NEMA Contactor Size 2 3 4 Solid State Overload Relay Size 00B 00C 0 1 2 3 4 d n/a n/a d n/a n/a d n/a n/a d n/a n/a Std n/a n/a Std d Std 16 NEMA Solid State Overload Relay Size Contactor 00C 0 1 2 00B Size 00 d Std 0 d d Std 1 d d d Std d Possible factory starter combinations available. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS NEMA Size (Overload Current Range) Factory Modifications © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-111 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Factory Modifications (Forms) For Full Voltage Contactors & Starters Refer to Catalog 8502CT9701 www.schneider-electric.us ® Table 16.318: MOTOR LOGIC Plus Factory Modifications—Form B For use with Class 8536 (Open Starters) Factory Modification Form B Second Digit Designator No modification for 200–480 V Add communication module for 200–480 V No modification for 600 V Add communication module for 600 V 0 2 4 6 First Digit Designator - Starter Packages with MOTOR LOGIC Plus Current Ranges 2 3 .5–2.3 A 957.00 171.00 957.00 171.00 4 2–9 A 957.00 171.00 957.00 171.00 5 6–27 A 957.00 171.00 957.00 171.00 6 10–45 A 957.00 171.00 957.00 171.00 7 20–90 A 957.00 171.00 957.00 171.00 60–135 A 1070.00 171.00 1070.00 171.00 8 120–270 A 1070.00 171.00 1070.00 171.00 9 240–540 A 1070.00 171.00 1070.00 171.00 Example: Form B 4 2 = MOTOR LOGIC Plus overload relay with a current range of 9–18 A and factory modifications to add A communication module for 200–480 volt applications Table 16.319: Full Voltage Controllers Only Classes 8502, 8536, 8538, 8539, 8702, 8736, 8738, 8739, 8810, 8811 and 8812 Factory Modifications Enclosure Type Form NEMA Size 00 0 1 2 3 4 5 6 Addition of one NEMA Size 1, — 30 A single pole N.O. unit Any Y428 287.00 287.00 287.00 b 287.00 287.00 287.00 287.00 Addition of one NEMA Size 1, — 30 A single pole N.C. unit Any Y429 287.00 287.00 287.00 b 287.00 287.00 287.00 287.00 Addition of one NEMA Size 1, — 30 A double pole N.O./N.O. unit Any Y430 441.00 441.00 441.00 b 441.00 441.00 441.00 441.00 Addition of one NEMA Size 1, — 30 A double pole N.C./N.C. unit Any Y434 441.00 441.00 441.00 b 441.00 441.00 441.00 441.00 Addition of one NEMA Size 1, — 30 A double pole N.O./N.C. unit Any Y435 441.00 441.00 441.00 b 441.00 441.00 441.00 441.00 Power Poles Addition of one NEMA Size 2 — — — single pole N.O. unit Any Y436 414.00 b 414.00 414.00 414.00 414.00 Addition of one NEMA Size 2 — — — single pole N.C. unit Any Y437 414.00 b 414.00 414.00 414.00 414.00 Addition of one NEMA Size 2 — — — double pole N.O./N.O. unit Any Y438 698.00 b 698.00 698.00 698.00 698.00 Addition of one NEMA Size 2 — — — double pole N.C./N.C. unit Any Y439 698.00 b 698.00 698.00 698.00 698.00 Addition of one NEMA Size 2 — — — double pole N.O./N.C. unit Any Y440 698.00 b 698.00 698.00 698.00 698.00 158.00 158.00 158.00 158.00 158.00 158.00 Coil transient suppressor (120 Volt only). Per Coil. Any Y145 158.00 158.00 of terminal blocks (specify wired or unwired). Miscellaneous Addition 116.00 116.00 116.00 116.00 116.00 116.00 116.00 Wired, per terminal. Each 1, 4, 12 G56a — 57.00 57.00 57.00 57.00 57.00 57.00 57.00 Unwired, per terminal. Each 1, 4, 12 G50a — a Addition of terminal block type 9080CA or 9080GR6 only. Number of circuits is same as ending of form number. (Ex.: G505 is 5 wire terminal block.) Available in groups of 5 only. b When adding a power pole to a Size 2 device, also specify Form Y118 and add $140.00. 7 287.00 287.00 441.00 441.00 441.00 414.00 414.00 698.00 698.00 698.00 158.00 116.00 57.00 Table 16.320: Reversing Full Voltage Starters Onlyc Class 8810 Factory Modifications Enclosure Type Form 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 0 1 Y791 2010.00 Molded case circuit breaker 4, 7d, 9d Y791 2862.00 12 Y791 2037.00 1 Y792 1340.00 Non–fusible disconnect switch 4, 9d Y792 2172.00 12 Y792 1368.00 1 Y793 1566.00 Fusible switch with 30 A fuse clips 4 Y793 2421.00 12 Y793 1596.00 1 Y794 — Fusible switch with 60 A fuse clips 4 Y794 — 12 Y794 — 1 Y795 — 4 Y795 — Fusible switch with 100 A fuse clips Circuit Breaker 12 Y795 — or 1 Y796 — Disconnect Switch Fusible switch with 200 A fuse clips 4 Y796 — 12 Y796 — 1 Y797 — Fusible switch with 400 A fuse clips 4 Y797 — 12 Y797 — 1 Y798 — Automatic molded case switch with 600 A fuse clips 4 Y798 — 12 Y798 — 1 Y799 — Automatic molded case switch with 1200 A or less fuse clips 4 Y799 — 12 Y799 — 1 Y7910 — Automatic molded case switch 4 Y7910 — 12 Y7910 — c For non-reversing 2-speed starters with disconnect switch or circuit breaker, see pages 16-65–16-70. d NEMA 7 & 9 adders apply to 8810 non-reversing devices Sizes 0, 1 and 2 only. 16-112 CP1 Discount Schedule NEMA Size 1 2010.00 2862.00 2037.00 1340.00 2172.00 1368.00 1566.00 2421.00 1596.00 1566.00 2421.00 1596.00 — — — — — — — — — — — — — — — — — — 2 2451.00 3533.00 2564.00 1710.00 2646.00 1823.00 — — — 1823.00 2885.00 1938.00 — — — — — — — — — — — — — — — — — — 3 2664.00 4886.00 2862.00 2165.00 4388.00 2366.00 — — — — — — 1336.00 4559.00 2537.00 2885.00 5129.00 3105.00 — — — — — — — — — — — — 4 5 6 7 4872.00 9471.00 13944.00 19328.00 7092.00 11808.00 18216.00 23601.00 5079.00 10839.00 14990.00 20397.00 2165.00 5355.00 — — 5327.00 7691.00 — — 4815.00 5925.00 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 3596.00 — — — 5840.00 — — — 5327.00 — — — — 5868.00 11039.00 — — 8204.00 15354.00 — — 6438.00 12861.00 — — — 13802.00 — — — 18075.00 — — — 14871.00 — — — 15425.00 15425.00 — — 19697.00 19697.00 — — 17562.00 17562.00 — — 12293.00 13004.00 — — 16565.00 17276.00 — — 13361.00 14072.00 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Factory Modifications (Forms) Class 8502, 8536, 8538, 8539, 8702, 8736, 8738, 8739, and 8810 www.schneider-electric.us For Full Voltage Contactors & Starters Table 16.321: Full Voltage Controllersg Classes 8502, 8536, 8538, 8539, 8702, 8736, 8738, 8739, and 8810 NEMA Size Factory Modifications Control relay (4 & 8 poles) Enclosure Type Form 1, 12 4, 4X 7, 9 1, 12 4, 4X 7, 9 R174 R174 R174 R178 R178 R178 $ 485.00 741.00 741.00 741.00 1112.00 1112.00 1 2 3 4 5 6 7 1 PW 2 PW 3 PW 4 PW 5 PW 6 PW 7 PW 1 YD 2 YD 3 YD 4 YD 5 YD 6 YD 7 YD $ 485.00 $ 485.00 $ 485.00 $ 485.00 $ 485.00 $ 485.00 $ 485.00 741.00 741.00 741.00 741.00 741.00 741.00 741.00 741.00 741.00 741.00 741.00 741.00 — — 741.00 741.00 741.00 741.00 741.00 741.00 741.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 1112.00 — — 1 3R, 4, 4X, 12 7, 9 1 3R, 4, 4X, 12 7, 9 1, 3R, 4, 12 4X, 7, 9 1, 3R, 4, 12 4X, 7, 9 K25 K25 K25 K26 K26 K26 K37 K37 K38 K38 1197.00 1566.00 1566.00 1197.00 1566.00 1566.00 1197.00 1197.00 1197.00 1197.00 1197.00 1566.00 1566.00 1197.00 1566.00 1566.00 1197.00 1197.00 1197.00 1197.00 0 Pneumatic Timing Relay – specify Class 9050 Type A or B 0.1 seconds to 1.0 minute—On delay 0.1 seconds to 1.0 minute—Off delay 1.0 to 3.0 minute—On delay 1.0 to 3.0 minute—Off delay 1197.00 1566.00 1566.00 1197.00 1566.00 1566.00 1197.00 1197.00 1197.00 1197.00 1197.00 1566.00 1566.00 1197.00 1566.00 1566.00 1197.00 1197.00 1197.00 1197.00 1197.00 1566.00 1566.00 1197.00 1566.00 1566.00 1197.00 1197.00 1197.00 1197.00 1197.00 1566.00 1566.00 1197.00 1566.00 1566.00 1197.00 1197.00 1197.00 1197.00 1197.00 1566.00 — 1197.00 1566.00 — 1197.00 — 1197.00 — 1197.00 1566.00 — 1197.00 1566.00 — 1197.00 — 1197.00 — Solid State Timing Relay (specify timing range) and timer 1, 4, 4X, 7, 9, 12 K1070 449.00 449.00 449.00 449.00 449.00 449.00 449.00 449.00 (120 V control required) Motor driven timing relayac 1, 4, 12 K5 2507.00 2507.00 2507.00 2507.00 2507.00 2507.00 2507.00 2507.00 Phase failure and phase reversal relay with time delay option including under and over voltage protection. Addition of a protective relay with options of Phase Failure with Time Delay, Phase Reversal and Under/ 1, 3R, 4, 4X, 7/9, 12 R44 1463.00 1463.00 1463.00 1463.00 1463.00 1463.00 1463.00 1463.00 Over Voltage Protection. (RM3TR1). Both motor voltage and control voltage (V8• voltage code) must be specified with device even if Form S is specified. Form replaces Forms Y444, Y445, Y447, Y448 and Y449. For multispeed controllers: 1, 4, 7, 9, 12 R1 941.00 941.00 941.00 941.00 941.00 941.00 941.00 941.00 Compelling relay (requires motor to be started in low speed) Accelerating relay (provides timed acceleration to selected speed): For Class 8810 1, 4, 7, 9, 12 R2 2195.00 2195.00 2195.00 2195.00 2195.00 2195.00 2195.00 2195.00 For Class 8811 1, 4, 7, 9, 12 R2 4388.00 4388.00 4388.00 4388.00 4388.00 4388.00 4388.00 4388.00 For Class 8812 1, 4, 7, 9, 12 R2 6579.00 6579.00 6579.00 6579.00 6579.00 6579.00 6579.00 6579.00 Decelerating relay (imposes a timing delay during transfer from a higher to a lower speed): For Class 8810 1, 4, 7, 9, 12 R3 2195.00 2195.00 2195.00 2195.00 2195.00 2195.00 2195.00 2195.00 For Class 8811 1, 4, 7, 9, 12 R3 4388.00 4388.00 4388.00 4388.00 4388.00 4388.00 4388.00 4388.00 For Class 8812 1, 4, 7, 9, 12 R3 6579.00 6579.00 6579.00 6579.00 6579.00 6579.00 6579.00 6579.00 Antiplugging timers and relays 1, 4, 7, 9, 12 R10 3846.00 3846.00 3846.00 3846.00 3846.00 3846.00 3846.00 3846.00 Ammeter in cover (includes current transformer if required) 1, 12 G91 1994.00 1994.00 1994.00 1994.00 2820.00 2820.00 2820.00 2820.00 Ammeter and switch with two current transformers 1, 12 G92 — 4274.00 4274.00 4274.00 4274.00 4274.00 4274.00 4274.00 d Ammeter and switch with three current transformers 1, 12 G93 — 5270.00 5270.00 5270.00 5270.00 5270.00 5270.00 5270.00 Meters Voltmeter mounted 1, 12 G94 — 2820.00 2820.00 2820.00 2820.00 2820.00 2820.00 2820.00 and Voltmeter and switch mounted 1, 12 G95 — 4274.00 4274.00 4274.00 4274.00 4274.00 4274.00 4274.00 Metering Elapsed time meter 1, 12 G97 827.00 827.00 827.00 827.00 827.00 827.00 827.00 827.00 Operation counter 1, 12 G99 1425.00 1425.00 1425.00 1425.00 1425.00 1425.00 1425.00 1425.00 Additional starter (contactor) auxiliary contacts (Specify number of additional N.O. or N.C. contacts required Any Xe 158.00 158.00 158.00 158.00 158.00 158.00 158.00 158.00 per contactor.) Each Auxiliary contacts installed on disconnect switch or circuit breaker operating mechanism. Auxiliary Contacts SPDT 1, 4, 4X, 12 Y74 192.00 192.00 192.00 221.00 221.00 413.00 413.00 413.00 DPDT 1, 4, 4X, 12 Y75 386.00 386.00 386.00 441.00 441.00 570.00 570.00 570.00 (Note: Above contacts do not switch with automatic tripping of circuit breaker. If such operation is required, consult your nearest Square D/ Schneider Electric Sales Office.) Space heater with N.C. auxiliary contact 1, 4, 4X, 12 G51 386.00 386.00 684.00 1097.00 1767.00 2622.00 3987.00 3987.00 Function identification plate, with marking as specified Any G11 42.80 42.80 42.80 42.80 42.80 42.80 42.80 42.80 Drain and breather installed 7 & 9h Y41 372.00 372.00 372.00 372.00 372.00 372.00 372.00 — Cover gaskets added to NEMA 1 enclosures: For Classes 8538 and 8539 1 Y47 143.00 143.00 Std. Std. Std. Std. — — For Classes 8738 and 8739 1 Y47 Std. Std. Std. Std. Std. Std. — — For other full voltage controllers 1 Y47 143.00 143.00 215.00 320.00 534.00 1070.00 1710.00 1710.00 For reduced voltage controllers 1 Y47 143.00 143.00 215.00 320.00 534.00 1070.00 1710.00 1710.00 Enclosures Brushed stainless steel watertight device (add to catalog price of sheet steel watertight device): Class 8606 — Y56 — — 1710.00 2138.00 3419.00 4773.00 8546.00 8546.00 Classes 8630 and 8640 — Y56 — Std. Std. Std. Std. 4773.00 8546.00 8546.00 Non-standard size or location of conduit openings or hubs (Specify size ® and location. Does not apply to SPIN TOP starters. No deduction for omission of standard conduit provision. Use of standard pipe plug by user recommended instead.) For 2-1/2 inch and smaller conduit. Each 4, 4X G7 86.00 86.00 86.00 99.00 99.00 99.00 — — For 3 inch to 4 inch conduit. Each 4, 4X G7 215.00 215.00 215.00 215.00 215.00 215.00 — — a If controller has a control transformer, price that transformer with additional capacity for the relay provided. b This adder, used with a NEMA 4X enclosure, applies only to Classes 8538, 8539, 8738, 8739 and 8810 non-reversing. c Specify control and line voltage. d Motor hp and voltage required when placing order. Meters will be panel mounted in NEMA 12 enclosures. e To determine the maximum number of auxiliary contacts which can be added to each Type S device and for the appropriate “X Form”, refer to the tables in the Class 8536 section on page 16-14 (for non-reversing single-speed devices) or the Class 8736 section on page 16-44 (for reversing or two-speed devices). For Class 8600 Reduced Voltage controllers, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). f Addition of control relay 1–8 poles. Number of poles is same as ending of form number. (Ex: R174 = 4-Pole relay). g NEMA 7 & 9 enclosures not available with Class 8600 devices. h Available only on SPIN TOP and cast aluminum NEMA 7/9 enclosures. 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Auxiliary Relays © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-113 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Magnetic Coils Class 9998 www.schneider-electric.us Table 16.322: Replacement AC Magnet Coils for Magnetic Contactors and Starters (Refer to Table 16.324 on page 16-115 for listing of mechanically held unlatch coils.) Poles Coil Prefix or Class and Type 2–6 9998L 8–12 9998LH Equipment To Be Serviced Device Coils for Present Design Magnetic Contactors and Starters Classes 8502, 8536, 8538, 8539, 8606, 8630, 8640, 8647, 8650, 8651, 8702, 8736, 8738, 8739, 8810, 8811, 8812, 8903, 8910c and 8940 (except NP) 8911d 8965e a b c d e Size Type L 30 Amp LX (Latch) 00 SAb (Series B) 00 0, 1, 1–P & 30 Amp SA (Series A) SB, SC & SM 2& 60 Amp SD & SP 3& 100 Amp DPA12_, SE, SQ & SYD138 SF, SV & SYD230 SG, SX & SYD368 Series A 5 & 300 Amp SG, SX & SYD368 Series B 6&7 SH & SJ SY, SZ, SJ 400, 600 (Elect. Held) & 800 SY, SZ, SJ Amp (Mech. Held) Use next higher voltage, 60 Hz coil. Use on Type S Series B devices only. For 8910DPA1x to DPA9x, see page 16-77. For 8911, see page 16-80 For 8965, see page 16-88 and 16-89. 2–4 9998L 6–12 9998LH All 9998SAC All 31041-400 2&3 31063-409 4&5 31063-400 2&3 31074-400 4&5 31091-400 All 31091-400 4 & 200 Amp All 31096-400 All 31096-320 Suffix Number (Complete Coil Number Consists of Prefix or Class and Type Followed by Suffix Number.) Hz $ Price 60 50 60 50 60 50 60 50 60 50 60 50 24 V 23 24 23 24 23 24 23 24 23 — 20 22 110-115 V — 44 — 44 — 44 — 44 a 45 120 V 44 45 44 45 44 45 44 45 45 — 208 V 50 52 50 — 50 52 50 — 52 — 220 V a 53 a 53 — 53 — 53 a 54 240 V 53 54 53 54 53 54 53 54 54 — 277 V 55 — 55 — 55 — 55 — 55 — 380 V — 60 — 60 — 60 — 60 59 — 440 V — 62 — 62 — 62 — 62 a 62 480 V 62 63 62 — 62 63 62 — 62 — 550 V — 65 — 65 — 65 — 65 a 65 600 V 65 66 65 — 65 66 65 — 65 — a 42 42 43 48 — a 51 51 53 52 — 56 57 58 60 60 a 61 62 62 64 60 50 60 50 60 50 60 50 60 50 60 50 60 50 16 17 16 17 16 17 — — — — — — — — a 38 a 38 a 38 a 38 a 38 a 09 50 50 38 39 38 39 38 39 38 39 38 39 09 10 50 50 44 — 44 — 44 — 44 — 44 — 15 — 51 — a 47 a 47 a 47 a 47 a 47 a 18 52 52 47 48 47 48 47 48 47 48 47 48 18 — 52 52 49 — 49 — 49 — 49 — 49 — 19 — 53 — 53 54 53 54 53 54 53 54 53 54 21 22 54 54 a 57 a 57 a 57 a 57 a 57 a 24 55 55 57 — 57 — 57 — 57 58 57 58 24 — 55 55 a 60 a 60 a 60 a 60 a 60 a 29 — — 60 61 60 61 60 61 60 61 60 61 29 30 — — 2–3 2–3 Coil VA Coil Part Number 3110440050 (All System Voltages) 31104-418 60 50 — — a 09 09 — 15 — a 18 18 — 19 — — — a 24 24 — a 29 29 — Inrush 150 140 180 170 150 140 180 170 165 — 245 232 Sealed 30 30 35 35 — — — — 33 — 27 26 85.00 311 296 438 429 700 678 1185 1260 1185 1260 2970 2970 1300 — 1780 37 36 38 37 46 47 85 89 85 89 212 250 14 — 48 128.00 1960 59 1530 1250 — — 85.00 85.00 85.00 85.00 98.00 128.00 254.00 254.00 254.00 354.00 600.00 860.00 860.00 NEMA S Size 5 E-Coil Modification Kit Classes 8502, 8536, 8538, 8539, 8606, 8630, 8640, 8647, 8650, 8651, 8702, 8736, 8738, 8739, 8810, 8811, 8812, 8910 and 8903 Consisting of: • E-Coil • Armature • 15 A, 600 V Fuse and Holder (Class 9999SFR) • Bottom Magnet • Instruction Material Table 16.323: Catalog Number 9998SG120 9998SG480 9998SG277 9998SG208 9998SG240 9998SG380 Description Coil Modification Kit 120 V Coil Modification Kit 480 V Coil Modification Kit 277 V Coil Modification Kit 208 V Coil Modification Kit 240 V Coil Modification Kit 380 V $ Price 1506.00 1506.00 1506.00 1506.00 1506.00 1506.00 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-114 CP10 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Magnetic Coils Class 9998 / Refer to Catalog 9065CT9701 www.schneider-electric.us 0 Table 16.324: Replacement AC Magnet Coils for Relays, Timers and Contactors Equipment To Be Serviced Coil Prefix or Class and Type Suffix Number (Complete Coil Number Consists of Prefix or Class and Type Followed by Suffix Number) Hz Coil VA $ Price 480 V 550 V 600 V Inrush 60 23 — 44 51 52 53 55 — — 62 50 24 44 — 52 53 — — — 62 — 60 W25A W31B W32A W34A W34B W35A W35B — W37B W38A A All 2959-S4950 W25B W32A W32B W34B W35A W35B W36A — W38A W38B 9050 (Timer) 60 33 — 54 61 61 63 65 — 70 72 Bb All 31017-40050 34 — 55 — 63 64 — — 72 73 Mechanically Held Unlatch Coils—Classes 8508 and 8903 Note: A latch coil is also used with mechanically held devices. For selection of latch coils for mechanically held relays, refer to page 16-114. 60 23 — 44 51 — 53 55 — — 62 LX All 9998LX 50 — 44 — — 53 — — — 62 — 60 W23B c W30B W33A c W33B W34A — c W36B SM, SP All 2959-S13 8903 50 W24B W30B W31B — W33B W34B — W36A W36B — (Lighting SQ, SV, SX, 60 03 c 09 15 c 18 20 — c 24 Contactors) All 31096-416 SY, SZ 50 — 09 — — 18 — — 22 24 — 60 03 c 09 15 c 18 20 — c 24 SJ All 31123-403 50 — 09 — — 18 — — 22 24 — — 65 W38B W39A 73 75 65 — W39A W39B 75 76 148 143 74 68 165 155 23 25 17 17 27 27 — 65 c W37B c 28 c 28 65 — W37B — 28 — 28 — 25 — 80 — 550 — 2100 — — — — — — — — — Device Type Classes 8501 and 9050 8501 X (Relays) Poles All 24 V 110–115 V 120 V 208 V 220 V 240 V 277 V 380 V 440 V 9998-Xa Sealed 69.00 132.00 98.00 118.00 202.00 202.00 202.00 Table 16.325: Replacement DC Magnet Coils for Magnetic Relays and Timers Equipment To Be Serviced Class 8501 (Relays) 9050 (Timers) Type Poles XD XDL XUD C H All — All Suffix Number (Complete Coil Number Consists of Prefix or Class and Type Followed by Suffix Number.) Coil Prefix or Class and Type 6V 12 V 18 V 24 V 32 V 48 V 64 V 72 V 90 V 110 V 9998 XD 9998 XDL 9998 XUD 31018-4004491S1 19 19 19 22 W21 28 28 28 31 W24 34 34B — — — 37 37B 37 40 W27 40 40B — — — 46 46B 46 49 W30 49 49B — — — 52 52B — — — 55 55B — — — — — — — — 115/ 125 V 220 V 58 — 58B — 58d — 61 — W34 — 230/ 250 V 67 67B 67d 70 W37 Coil Burden Watts $ Price 18 50 16 14 14 168.00 216.00 168.00 312.00 210.00 Table 16.326: Replacement Coil for 8903 Panel Board Lighting Contactors Replacement Catalog Number $ Price e Solenoid 120 V 9998PBV02 428.00 208 V 9998PBV08 428.00 8903 PB 240/277 V 9998PBV39 428.00 480 V 9998PBV28 428.00 To order an unlatch coil add the letter “L” to the type number and the letter “B” to the suffix number. Example: For a 120 V 60 Hz unlatch coil order a Class 9998 Type XL44B. Price for the 9998 Type XL coil series is $114.00. Series C (Double Pole) and Series E (Single Pole). Use next higher voltage, 60 Hz coil. Not dual rated. 125 Vdc or 250 Vdc only. CP1 discount schedule. Class a 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS b c d e Type © 2009 Schneider Electric All Rights Reserved CP10 CP1 Discount Schedule 16-115 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Replacement Parts Kits Class 9998 www.schneider-electric.us Class 9998 replacement parts kits are available for servicing Square D relays, contactors, and starters as well as pressure, vacuum, and float switches. Each kit contains the necessary movable and stationary contacts, contact springs (when required—NEMA Size 3 and above do not include contact springs, and springs are not available), and additional hardware required to service the devices listed below. When servicing devices having more poles than contained in the corresponding kit, it may be necessary to order an additional kit. Table 16.329: Class 8965 Replacement Contact Kits Device Device Type Series DPR53 A DPR63 A RO10 A&B RO11 A&B RO12 A&B RO13 A&B b Single pole kits. Equipment To Be Serviced Class Equipment To Be Serviced Type SA-, (Series B) SB- 8502 8536 8538 8539 8547 8549 8606 8630 8640 8647 8702 8736 8738 8739 8810 8811 8812 8940 0 SB-, SC-(Power Pole Adder) SC- 0&1 1 & 1P 1 SD- 2 SD-(Power Pole Adder) 2 SE- 3 SF- 4 SG- 5 SH- 6 SJ- 7 L (Series C) & LX (Series B) 30 Amp 30 Amp 60 Amp 100 Amp 200 Amp 300 Amp 400 Amp 600 Amp 800 Amp 30, 60 A 75, 100 A 30, 60 A 75, 100 A 150, 200, 225 A 150, 200, 225 A SMSPSQSVSXSY- 8903 NEMA Size or Amp Rating 00 SZSJPBM, PBP PBN, PBQ PBM, PBP PBN, PBQ PBR, PBV, PBW PBR, PBV, PBW No. of Class 9998 Poles Parts Kit in Kit Type No. SJ1 SL2 SL12 SL22 SL3 SL13 SL4 SL14 SL24 SL6 SL7 SL8 SL9 SL10 SL11 SL25 SL26 SL30 SL31 90.00 130.00 176.00 63.00 188.00 246.00 370.00 494.00 124.00 442.00 662.00 848.00 1270.00 2104.00 3120.00 3762.00 5606.00 5454.00 8162.00 4 RA5B 174.00 3 4 3 4 2 3 2 3 2 3 2 3 2 3 2 3 SL3 SL13 SL4 SL14 SL6 SL7 SL8 SL9 SL10 SL11 SL25 SL26 SL32 SL33 SL30 SL31 188.00 246.00 370.00 494.00 442.00 662.00 848.00 1270.00 2104.00 3120.00 3762.00 5606.00 3762.00 5606.00 5454.00 8162.00 2 PB2 520.00 3 PB3 780.00 2 PB14 850.00 3 PB15 1276.00 Table 16.328: Magnetic Contactor and Starter Contact Kits for Obsolete Designs Equipment To Be Serviced 16 Class 8502 & 8536a Type SA-, (Series A) 2510 Manual Starters $ Price 3 3 4 1 3 4 3 4 1 2 3 2 3 2 3 2 3 2 3 Device Series Class 9998 Kit Type $ Price — — C C C C RA14 RA15 RA16 RA17 52.00 59.00 202.00 202.00 236.00 236.00 Table 16.330: Manual Starter Contact Kits Table 16.327: Magnetic Contactor and Starter Contact Kits for Present Designs Class Class 9998 Kit Type DRC5b DRC6b RA10 RA11 RA12 RA13 Type M-, T- No. of Class 9998 NEMA Poles in Parts Kit Type $ Price Kit No. Size M-0 3 ML1 90.00 M-1 & 3 ML2 106.00 M-1P Table 16.331: Replacement Control Transformers (150 VA) Class 8502, 8536 Type S Size 6 Voltage 60 Hz 240/480–120 208–120 277–120 — 600–120 120–120 240–120 50 Hz 220/440–110 — — 380–110 550–110 110–110 220–110 Part Number $ Price 3110451250 3110451252 3110451253 3110451254 3110451251 3110451255 3110451256 188.00 Table 16.332: Replacement Control Transformers (200 VA) Class 8502, 8536 Type S Size 7 Voltage 60 Hz 240/480–120 208–120 277–120 — 600–120 120–120 240–120 50 Hz 220/440–110 — — 380–110 550–110 110–110 220–110 Part Number $ Price 3112350150 3112350152 3112350153 3112350154 3112350151 3112350155 3112350156 236.00 Table 16.333: Class 8910, 8911 & 8965 Replacement Contact Kits Device To Be Serviced Class 9998 Class 8910 Class 8911 Class 8965 1-Pole Series Type Type Type Type SYD138 — — — — SYD230 — — — — SYD368 — — — — DPA_20A DPSO1_ DPR1_ B DRC1 DPA_25A DPSO2_ DPR2_ B DRC2 DPA_30A DPSO3_ DPR3_ B DRC3 DPA_40A DPSO4_ DPR4_ B DRC4 DPA_50A DPSO5_ DPR5_ A, B DRC5 DPA_60Ac DPSO6_ DPR6_ A, B DRC6 DPA_75A DPSO7_ — A DRC7 DPA_90A DPSO9_ — A DRC9 DPA_120A — — A DRC12 c For class 8911, 60 A starter, use the 9998DRC7 contact kit. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS NEMA Size No. of Poles in Kit Class 9998 Parts Kit Type No. $ Price Table 16.334: How to Order 00 3 4 SL2 SL12 130.00 176.00 • • To Order Specify: LL, L (Series A, B) & 20 4 RA5 174.00 LX (Series A) Amp Includes reversing, two speed and similar devices. Select coil based on NEMA size of basic starter or contactor. Class Number Type Number $ Price 3-Pole Type SL27 SL28 SL29 — — — — — — — — — 662.00 1270.00 3120.00 24.80 22.80 24.80 29.00 52.00 59.00 100.00 132.00 222.00 Catalog Number Class 9998 Type SL6 8903 a 16-116 CP10 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Replacement Parts Kits Starter Accessories Class 9998, 9999 www.schneider-electric.us Contact Units for Melting Alloy Type Overload Relays One normally closed contact, Class 9998 Type SO1, is provided in each overload relay block on Type S starters Sizes 00-4 and Size 6. On the Type S Size 5, a normally closed contact is provided with each of the three overload relay blocks. The Class 9998 Type SO1 contact unit listed below is provided as standard in each Class 9065 melting alloy overload relay. Contact modules can be easily replaced and are identified in the table below. Isolated overload relay alarm circuit contacts are available as an optional feature. A pilot light or alarm bell can be wired in series with this contact to indicate that the overload relay has tripped. For further information on isolated alarm contacts refer to Class 9999 Types SO4 and SO5 (page 16-122). Class 9998 Type SO1 Table 16.335: Magnetic Starter NEMA Size 00–4 &6 5 a b Type Series SA–SF SH A&B SG Parts Kit Number Description a Standard N.C. contact unit Class 9998 Type SO1b 39.40 3110251450 3110251451 134.00 196.00 Standard N.C. contact unit N.C. and N.O. alarm (three point) contact unit A $ Price Refer to page 16-119 for contact ratings. The Type SO1 is also the replacement contact unit for Class 9065 Type M melting alloy overload relays. Class 9998 Type UB Universal Baseplate Overload Contact Unit Part No. 31102-514-50. Used on Size 5 Starter (8536SGO) with Melting Alloy Overload Relay. A universal baseplate may be used to retrofit a Square D Type S NEMA starter into an application which is currently using a competitive NEMA starter. The universal baseplate is a metal plate which attaches to the panel in the location of the starter to be replaced. The Type S starter then mounts to the baseplate. It is available for NEMA Sizes 00 through 4, and mounting screws are provided with each plate. The universal baseplate adapter allows the Type S starter to replace the following competitive starters: Table 16.336: Competitor Starter NEMA Size Baseplate NEMA Size Baseplate NEMA Size Baseplate NEMA Size Baseplate Allen Bradley 509 Allen Bradley 709 Cutler Hammer Freedom Series Furnas ESP100 Furnas INNOVA General Electric CR306 Telemecanique “A” Line and Pre-type “S” L1 L1 L2 2 2 2 2 2 2 2 UB01 UB11 UB02 UB12 3 3 3 3 3 3 3 UB03 UB13 4 4 4 4 4 4 4 UB04 $ Price No charge UB14 Melting Alloy Overload Relay Jumper Strap Kits L2 Disconnecting Means, Provided by User, or with Controller 1 0, 1 1 00, 0, 1 0, 1 0, 1 00, 0, 1 0, 1 L3 Jumper strap kits are for use on three-phase manual or magnetic starters with melting alloy overload relays only, where a three-phase starter is used to control a single-phase motor. These kits will include two jumper straps, a wiring diagram showing how to wire a three-phase starter to control a single-phase motor, and single-phase (one thermal unit) selection tables. Table 16.337: Melting Alloy Overload Relay Jumper Strap Kits T1 T2 T1 T3 For Starter Class Size 00, 0, 1, 2 and M0 & M1 3,4 5 T2 Three Phase Starter Motor Wired to Control a Single Phase Motor Melting Alloy Overload Relay Jumper Strap Kits ALL c Type SA, SB, SC, SD and M & T (Manual) SE, SF SG Class 9998 Kit Type $ Price c SO31 14.30 SO32 None Available 21.50 CP1 discount schedule. How to Order Table 16.338: How to Order To Order Specify: Catalog Number Class 9998 Class Number Type Number Type UB01 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS • • © 2009 Schneider Electric All Rights Reserved CP10 CP1 Discount Schedule 16-117 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Class 9999 www.schneider-electric.us Cover-Mounted Control Units Class 9999 push button, selector switch and pilot light cover-mounted control unit kits can be easily field installed in a NEMA 1, 3R, 4 or 12 Type S contactor or starter enclosure cover. Knockouts or removable closing plates are furnished with many enclosure covers for convenient field installation of control units. Kits are supplied with leads and clearly illustrated instructions. The Class 9999 cover mounted control unit kits are identical to the units which are factory installed. Table 16.339: NEMA 1 Kit Description For Use With Push Button Red or Green Pilot Lightb Type SA, SB & SC 00, 0, 1 & 1P SD 2 8502 & 8536 8538 8539 8702 8736 SE 3 SF SG–SJ SB & SC SD SE SF SG–SJ 4 5–7 0&1 2 3 4 5–7 L 20 Amp Voltage Class NEMA No. Size of or Ampere Poles Rating With Control Transformer (Form F4T) Type All SP28Rc All SP28Rc 2–3 SP28Rc 4–5 SP28Rc All SP28Rc All SP28Rc All SP12R All 6–600 SP13R Volts All SP14R 50–60 All SP15R Hz All SP28Rc All Price 215. 215. 215. 215. 215. 215. 215. 215. 215. 215. 215. Standard Type SP2R SP3R SP4R SP5R SP28Rc SP28Rc SP12R SP13R SP14R SP15R SP28Rc SP28Rc 215. Price 215. 215. 215. 215. 215. 215. 215. 215. 215. 215. 215. — Red or Green Pilot Lightb Selector Switch Push Button OnOff $ Hand- On- Price OffOff Auto 120 V 60 Hz Type Type Type Type Type Type Type SA2 SA10 SC2 SC22 116. SA3 SA3 SC8 SA2 SA10 SC2 SC22 116. SP28Rc SA3a SC8 SA3 SA3 SC8 — SA10e — f 8903 (Electrically Held) — Red or Green Pilot Lightb Selector Switch StartStop — NEMA 4/4X Kit (Stainless) Descriptiond NEMAs 3R & 12 Kit Descriptiond Push Selector Button Switch $ StartStart-Stop Hand-Off- Price or 120 V 60 Hz Stop Auto or On-Off On-Off $ Hand- Price OffAuto Type Type Type SP29R SA13 SC9 215. 215. 215. — 215. SC22 116. e SM 30 Amp All SP28Rc 215. SP2R 215. SA2a SA10a SC2 SC22 116. SP 60 Amp All SP28Rc 215. SP3R 215. SQ 100 Amp All SP28Rc 215. SP28Rc 215. SA3a SA3a SC8 — 215. 200–800 SJ, SV, SX All SP28Rc 215. SP28Rc 215. SA3a SA3a SC8 — 215. Amp SY, SZ a Also requires N.O. auxiliary contact for holding circuit contact when used on Class 8903 electrically held lighting contactors. b Each pilot light kit contains 1 red and 1green lens cap. c The coil voltage must be the same as the pilot light rating. Kit contains one Class 9001 Type KP1R31120V, 60 Hz red pilot light control unit. For other voltages, refer to Class 9001 Type KP. d User made openings are required in order to field install these modification kits on standard 8502, 8536 Type S Sizes 0–2, and 8903 Sizes 30–60 A NEMAs 4 and 12 enclosures. e To mount control unit in a NEMA 1 enclosure, a Class 9999 Type BLX bracket is also required, $35.60. f For Class 8903 (mechanically held contactor) control unit kits, refer to the Class 8903 section, page 16-71. Note: There are no field modification kits available for the polyester enclosures. Table 16.340: NEMA 1 Enclosure Closing Plates For Use With Class Type NEMA Size or Ampere Rating 8502, 8536, 8903 SA–SE or SM–SP 00–3 or 30–60 Amp 8538 & 8539 Pre-series “J” SB–SF 0–4 Description For Pilot Light or Reset— Slip-on Cover NEMA 1 Enclosure For Push Button or Selector Switch— Slip-on Cover NEMA 1 Enclosure For Push Button or Selector Switch— Hinged Cover NEMA 1 Enclosure For Pilot Light—Hinged Cover NEMA 1 Enclosure Type $ Price SG2 14.30 SG3 14.30 SG1 14.30 SG2 14.30 Table 16.341: How to Order To Order Specify: • • Catalog Number Class 9999 Class Number Type Number Type SP29R 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Class 9999 Type SP2R Pilot Light Kit 16-118 Class 9999 Type SA2 Push Button Kit Class 9999 Type SC2 Selector Switch Kit CP1 Discount Schedule Class 9999 Type SA3 Push Button Kit © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Auxiliary Contacts Class 9999 www.schneider-electric.us Auxiliary Contacts for Manual and Magnetic Contactors and Starters Internal Contacts External Contacts Class 9999 Type SX11 internal contact kit is a replacement unit for the N.O. holding circuit contact supplied as standard on Type S Sizes 00–2 three phase starters and contactors. The Class 9999 Type SX12 is a replacement unit for the N.C. electrical contact which is furnished as standard on Type S, Internal Auxiliary Sizes 00–2 mechanically interlocked Contact devices (e.g., Class 8736 reversing starters). Internal contacts are also used on Class 2510 Types M & T manual starters. The internal contacts can be used for other applications as long as the electrical rating is not exceeded. See table below for electrical ratings. Class 9999 Type SX6 external auxiliary contact is supplied as standard for the N.O. holding circuit contact on Type S Sizes 3–7 starters and contactors. Additional auxiliary contacts can be added to Type S contactors, starters External Single Circuit and lighting contactors. These Auxiliary Contact contacts mount on either side of the basic contactor and are available with convertible or non-convertible contacts. The contacts of the convertible version can be changed from N.O. to N.C. or vice versa in the field. The non-convertible version has fixed contacts, either N.O. or N.C. To determine the number of auxiliary contacts which can be added to each Type S contactor or starter, refer to the Class 8536 or Class 8736 section. See table below for electrical ratings. Table 16.342: Maximum Ratings for Type S Auxiliary Contacts and Timers Contact Ratings Contact Ratings AC Only (35% Power Factor) Volts AC SX11, SX12 120 or Less 120-600 Make 30 A 3600 VA Continuous Break 3A 360 VA 3A 3A Table 16.343: Class 8502, 8536 and 8903 Type S For Use With Type NEMA Size Ordering Information Kit Description Class 9999 Type SX6-SX10 SX13-SX17 Device To Be Serviced Class 8910 or 8911 Type Continuous Break 6A 720 VA 10 A 10 A Auxiliary Contact Kit Class 8965 Type Contact Arrangement Type of Connector Class 9999 Type DPR 1 N.O. 1 N.C. 1 N.O./1 N.C. 2 N.O. Screw/ Quick-Connect D10 D01 D11 D20 RO2 & RG2 RO10 Form X1 RO11 Form X1 RO3 & RG3 RO10 Form X2 RO11 Form X2 RO5 & RG5 RO12 Form X1 RO13 Form X1 RO6 & RG6 RO12 Form X2 RO13 Form X2 1 N.O. each side $ Price Each 35.60 64.00 R10 Slip-on 1 N.C. each side R11 1 N.O. each side R12 50.00 Screw 1 N.C. each side R13 Table 16.346: How to Order To Order Specify: Table 16.344: Class 8910 and 8911 Definite Purpose Contactors and Starters – Auxiliary Contacts Make 60 A 7200 VA Device To Be Serviced $ Price External—Field Convertible 1-N.O. Contact SX6 86.00 1-N.C. Contact SX7 86.00 SA-SJ 1-N.O. and 1-N.C. Isolated Contacts SX8 116.00 00–7 1-N.O. Overlapping Contact SX9a 116.00 1-N.C. Overlapping Contact SX10a 116.00 External—Non-Convertible 1-N.O. Contact SX13 99.00 1-N.C. Contact SX14 99.00 SA-SJ 00–7 1-N.O. & 1 N.C. Isolated Contacts SX15 134.00 1-N.O. Overlapping Contact SX16a 134.00 1-N.C. Overlapping Contact SX17a 134.00 Internal—Non-Convertible Contact SX11b 99.00 SA-SD 00–2 1-N.O. 1-N.C. Contact SX12b 99.00 a Types SX9 and SX10 or Types SX16 and SX17 must be used together and mounted on the same side of the contactor. They are suitable for applications where it is necessary for a normally open contact to overlap a normally closed contact. b Types SX11 and SX12 are not applicable for use on NEMA Sizes 3 or larger. Internal contacts can also be used on Class 2510 Types M and T manual starters. 120 or Less 120–600 AC Only (35% Power Factor) Table 16.345: Class 8965 Reversing/Hoist Contactors –Auxiliary Contacts Class 9999 Type Volts AC • • Class Number Type Number Catalog Number Class 9999 Type SX6 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Class 9999 Type Auxiliary Contact Kit Contact Arrangement Class 9999 Type $ Price Each 1 N.O. D10 24.60 1 N.C. D01 1 N.O./1 N.C. D11 44.30 2 N.O. D20 Type DPA122 and DPA123 use same auxiliary contacts as Type SA-SJ above. (Example: Class 9999 Type SX6). DPAc DPS 16 c © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-119 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Solid State Overload Relay, Motor Logic® and Motor Logic Plus Class 9999, 9065 / Refer to Catalog 9065CT9701 www.schneider-electric.us Motor Logic—Class 9999 Motor Logic Plus—Class 9065 Isolated Auxiliary Contacts for Motor Logic Overload Relays Lug-Lug Kit Overload relay auxiliary contacts are available factory installed or in kit form for field installation on MOTOR LOGIC overload relays. These contacts may be used for isolated alarm contact applications. Table 16.347: For Use With Class & Type 8536 SA-SJ NEMA Sizec 00B through 7 9065 SS, SR, SF, ST 00B through 7 Parts Kit Description Class 9999 $ Price Type N.O. or N.C. Auxiliary Contact (Field Convertible) AC04 This kit can be field installed on separately mounted Motor Logic Plus overload relays. Table 16.351: For Use With Class & Type 8536 SA-SH 9065 SP NEMA Size 1–6 1–6 Parts Kit Description Class 9999 Type Lug-Lug Kit MLPL $ Price 80.00 57.00 DIN Adapter Software Kit The DIN adapter provides a method to mount the MOTOR LOGIC overload relay to a 35 mm DIN rail. Solutions software program allows an IBM PC compatible computer (with Windows 95 or greater) to communicate with a Motor Logic Plus overload relay connected to an RS-485 network using Modbus protocol. Table 16.348: For Use With Parts Kit Description Class & Type NEMA Sizec 9065 SS or SF 00B, 00C, 0, and 1 DIN Adapter Class 9999 Type DA01 $ Price Table 16.352: For Use With 23.90 Class & Type 8536 SA-SH 9065 SP NEMA Size 1–6 1–6 Parts Kit Description Class 9999 Type $ Price Software Kit MLPS 1295.00 Lug-Lug and Lug-Extender Kits Communication Module A Class 9999 LL0 Lug-Lug Kit can be field installed on separately mounted overload relays. The standard Size 00B, 00C, 0, and 1 Class 9065 Type SS and SF overload relays are supplied without lugs. A Class 9999 LB0 LugExtender Kit is designed for Size 00B, 00C, 0, and 1 Retrofit Starter Applications. This kit allows the lugs to be in the same location as the Class 9065 melting alloy overload relay, eliminating the need for additional wire length. This module allows the Motor Logic Plus overload relay to support RS-485 electrical communications standards. Up to 99 Motor Logic Plus overload relays can be controlled and monitored from one remote personal computer. Table 16.353: For Use With Class & Type 8536 SA-SH NEMA Size 1–6 9065 SP 1–6 Table 16.349: For Use With Class & Type NEMA Sizec Parts Kit Description Class 9999 Type Kit for 9065 SS or SF 00B, 00C, 0, and 1 Lug-Lug separate mounting Lug-Extender Kit for 9065 SS or SF 00B, 00C, 0, and 1 retrofitting existing NEMA S starters $ Price 42.80 LB0 35.60 Class 9999 Type $ Price Modbus Communication Module MB22 171.00 Table 16.354: How to Order To Order Specify: LL0 Parts Kit Description • • Class Number Type Number Catalog Number Class Type 9999 AC04 Remote Reset Module The Remote Reset Module can be easily field installed on solid state overload relays. This module will allow the overload relay to be reset from a remote location. Table 16.350: 16 For Use With Parts Kit Class 9999 $ Price Type Class and Type NEMA Sizec Description 536 SA-SJ 00B through 7 Remote Reset RR04b 162.00 Module 9065 SS, SR, SF, ST 00B through 7 8536 SE-SF 3 and 4 Top Mounting RB34ab 35.60 Bracket 9065 SS, SR, SF, ST 3 and 4 a To be used to mount the remote reset module on the top of the overload relay. b 120 Vac power required. c NEMA Size 00B and 00C are not actual NEMA sizes. These designations are used to differentiate the lower FLA of these devices from the NEMA size 00 Motor Logic Solid State Overload Relay. NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-120 CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Class 9999 www.schneider-electric.us Class 9999 Type SB9 Double Power Pole Adder Power Pole Adders Control Circuit Fuse Holder One single or double circuit power pole kit may be field added to a basic 2 or 3-Pole Type S contactor or starter Sizes 0, 1 and 2, or 30–60 A lighting contactors. See table below for selection. The ratings for these power pole adders correspond to the NEMA contact ratings found on page 16-114. A two or three pole contactor or starter accepts only one single or double circuit unit. A power pole cannot be used on four or five pole devices or devices which are mechanically interlocked. The control circuit fuse holder is designed to be used on Type S contactors and starters, Sizes 00–7, when either one or two control circuit fuses, 600 V maximum, are required. The Type SF3 and SF4 fuse holders will accept standard 600 V Bussmann Type KTK or equivalent fuses (13/32" x 1-1/2"); 6 Amperes maximum. The SFR3 and SFR4 will accept Class CC 600 V Bussmann Type KTK-R or equivalent fuses only. Table 16.356: To add a power pole to a Size 0 and 1 device, remove return springs. When adding a power pole to a Size 2 or 60 A device, a coil change is required. Select a 4- and 5-Pole coil from the coil selection table on page 16-114, or specify Form Y118 as noted in the footnote below. Class 9999 Descriptionb Type SF3 SFR3 SF4 SFR4 Single Fuse Unit Single Fuse Unit for Class CC Fuse Two Fuse Unit Two Fuse Unit for Class CC Fuses b Fuses not included. $ Price 64.00 64.00 86.00 86.00 When adding Sizes 0–2 power pole kits to a Size 3–7 or 100–800 A device, an adapter bracket (9999 SBT1) is required. The Class 9999 Types SB6 through SB15 power pole kits are suitable for copper wire only. Types SB21 through 25 are supplied with lugs suitable for copper and aluminum wire. Table 16.355: For Use With Class 9999 Type SB9 Double Power Pole Adder Class 9999 Type SB6 Single Power Pole Adder Type Size Class 9999 Type SF4 Fuse Kit Power Pole Adder Kit Class 9999 Type Description $ Price SB, SC & SM 0, 1 & 30 A SB6 158.00 One N.O. power pole SD 2 SB11a adder 287.00 SP 60 A SB21a SB, SC & SM 0, 1 & 30 A SB7 158.00 One N.C. power pole SD 2 SB12a adder 287.00 SP 60 A SB22a SB, SC & SM 0, 1 & 30 A SB8 365.00 One N.O. and one N.C. SB13a SD 2 power pole adder 656.00 SP 60 A SB23a SB, SC & SM 0, 1 & 30 A SB9 365.00 Two N.O. power pole SD 2 SB14a adders 656.00 SP 60 A SB24a SB, SC & SM 0, 1 & 30 A SB10 365.00 Two N.C. power pole SD 2 SB15a adders 656.00 SP 60 A SB25a SE-SJ 3-7 & & Adapter Bracket SBT1 26.10 SQ-SZ & SJ 100-800 A a To order a Size 2 or 60 A power pole kit complete with a new starter coil, specify Form Y118, voltage and frequency and add $140.00 to the price of the kit (e.g., Class 9999 Type SB11 Form Y118, 120 volts, 60 cycles. Priced at $426.00). Transient Suppression Module The transient suppression module is designed to be used where the transient voltage, generated when opening the coil circuit, interferes with the proper operation of nearby integrated or solid state control circuits. The module consists of an RC circuit and is designed to suppress the coil voltage transients to approximately 200% of peak coil supply voltage. The module is wired across the coil for Type S, Sizes 00–5 and is designed for coil voltages of 120 volts only. Table 16.357: Class 9999 Description Type ST1 ST2 For Sizes 00-2 For Sizes 3-5 $ Price 62.00 62.00 Class 9999 Type ST1 Transient Suppression Module Table 16.358: How to Order To Order Specify: Class Number Type Number Catalog Number Class 9999 Type SM1 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS • • © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-121 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Class 9999 www.schneider-electric.us Isolated Alarm Contacts For Melting Alloy Overload Relays Isolated overload relay alarm contacts are available factory installed or in kit form for field installation in Type S, NEMA Size 00–6a starters and Class 9065 Types M and S melting alloy overload relays. Type S, NEMA Size 7, utilizes a solid state overload relay which has isolated alarm contacts as a standard feature. The alarm contacts allow the starter to be used in applications which require isolated contacts, such as inputs to a computer. Class 9999 Types SO4 and SO5 modules are interchangeable with the standard module (Class 9998 Type SO1) and may be installed on starters already in service. The case is made of clear plastic (polycarbonate) to allow for visual inspection of contacts. Table 16.359: Contact Unit For Melting Alloy Overload Relays Magnetic Starter NEMA Size Type SO4 Class 9999 Type $ Price N.O. Isolated Alarm Contact Plus SO4 Standard N.C. Overload Contact 116.00 N.C. Isolated Alarm Contact Plus SO5 Standard N.C. Overload Contact Isolated alarm contacts cannot be added in the field to the Type S Size 5 starter. Current transformers and a Size 1 overload block must be used. For factory installation specify Form Y342. 00-6a a Parts Kit Description Type SA-SH Compression Lugs A Class 9999 Type AL hardware kit is required to install Square D Versa-Crimp® compression lugs on Class 8903 Type S, 100–800 A lighting contactors. The lugs are suitable for both copper and aluminum wire. One VCEL lug is required for each line or load terminal. Each Class 9999 Type AL hardware kit includes mounting hardware for 3 terminals, line or load side. EXAMPLE: To install compression lugs on a 300 A 3-Pole device, line and load sides, order six VCEL06012H1 lugs and two Class 9999 Type AL11 hardware kits. Table 16.360: For Use With VERSA-CRIMP Catalog Number Class 8903 Type SQ Rating 100 Amp 200 Amp SV VCEL02114S1 VCEL022516H1 VCEL024516H1 VCEL030516H1 VCEL05012H1 300 Amp SX VCEL06012H1 Wire Range 8–1/0 Al/Cu 2-Pole 1–2/0 Al/Cu 3-Pole 2/0–4/0 Al/Cu 4-Pole 4–300 kcmil Al/Cu 2/0–500 kcmil Al/Cu 400–600 kcmil Al 400–500 kcmil Cu 500–750 kcmil Al 500 kcmil Cu 400–600 kcmil Al 400–500 kcmil Cu 500–750 kcmil Al 500 kcmil Cu VCEL07512H1 400 Amp or 600 Amp Class 8903 With Compression Lugs Installed b VCEL06012H2b SY or SZ VCEL07512H2b Hardware Kit Class 9999 Type None Required $ Price — AL13—2-pole AL14—3-pole AL15—4-pole 143.00 179.00 215.00 AL11 55.00 AL12 107.00 One or two lugs may be mounted on each terminal. Solid Neutral The Class 9999 Type SN kit can be used on Class 8903 Type S lighting contactors and other controllers where field addition of a solid neutral is required. Each kit has lugs suitable for both copper and aluminum wire, and mounts with two screws. Table 16.361: No. of Lugs Wire Capacity Per Lug (Cu/Al) 4 3 14–2/0 (1) 4–600 MCM or (2) 1/0–250 MCM (2) 2–600 MCM (2) 6–350 MCM 3 (Dual) 2 (Dual) Class 9999 Type SN1 $ Price 134.00 SN2 392.00 SN3 SN4 624.00 392.00 Tie Point Terminal Block 16 The tie point terminal block provides easy wiring of a Hand-Off-Auto selector switch or Start-Stop push buttons with separate control. The T7 terminal block requires no panel space. It simply snaps on Type S Sizes 00–4 contactors and starters by two tabs and is secured to the left hand coil terminal. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 16.362: Tie Point Terminal Block Magnetic Contactor or Starter NEMA Size 00–4 Type SA-SF Class 9999 Type T7 $ Price 33.30 Table 16.363: How to Order To Order Specify: • • 16-122 Catalog Number Class Type 9999 SO4 Class Number Type Number CP1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Mechanical Interlocks Class 9999 www.schneider-electric.us Mechanical Interlock General: Type S contactors or starters can be mechanically interlocked so that only one device is energized at a time. The mechanical interlock is an interference (non-jamming) type, locking at the beginning of the stroke of any starter or contactor. Type SM1 Type S Sizes 00, 0, 1 and 2—The mechanical interlock is mounted on the underside of the reversing baseplate. Two pins extend from the mechanical interlock through openings in the baseplate and engage the contact carrier of each contactor. Two styles of mechanical interlocks are used: one version for three pole contactors, a different version for four or five pole contactors. When adding a power pole to the left-hand side of an existing Size 0, 1, or 2 threepole reversing contactor, a new mechanical interlock must also be installed. When added to the right-hand side only, the power pole will not be mechanically interlocked with the left-hand contactor. Type S Sizes 3 and 4—The mechanical interlock is separate from the mounting pan on Sizes 3 and 4. Cams on the mechanical interlocks are operated by the contact carrier of each contactor. The mechanical interlock is attached to the underside of the two contactor baseplates on Sizes 3 and 4. Table 16.364: Mechanical Interlock for Two Contactors The following mechanical interlock kits can be used to interlock 2–5 pole contactors. Mechanical interlocks for horizontal and vertical arrangement are listed in Various pole arrangements. Horizontal Type SM1 for Size 00–1 Type SM6 for Size 2 Type SM12 for Sizes 3 & 4 Horizontal Type SM2 for Size 0 or 1a Type SM7 for Size 2 Type SM12 for Sizes 3 & 4 Vertical Type SM2 for Size 0 or 1a Type SM10 for Size 2 Type SM11 for Size 3 Type SM13 for Size 4 Contactor NEMA Size Class 9999 Type $ Price 00, 0, 1 SM1 116.00 0, 1 SM2 116.00 0, 1 SM3 116.00 0, 1 SM4 116.00 0, 1 SM5 116.00 2 SM6 257.00 2 SM7 257.00 2 SM8 257.00 2 SM9 257.00 2 SM10 257.00 3 SM11 257.00 Vertical Vertical 3, 4 SM12 257.00 Type SM4 for Size 0 or 1 Type SM5 for Size 0 or 1 Type SM9 for Size 2 Type SM11 for Size 3 4 SM13 257.00 Type SM11 for Size 3 Type SM13 for Size 4 Type SM13 for Size 4 The Type SM2 interlock is factory assembled for horizontal mounting, but can easily be converted to vertical mounting. Conversion instructions are included. Horizontal Type SM3 for Size 0 or 1 Type SM8 for Size 2 Type SM12 for Sizes 3 & 4 a Overload Relay Mounting Bracket Table 16.365: Overload Relay Mounting Bracket Mechanical interlock Types SM1 through SM10 for Sizes 00-2 devices use overload relay mounting brackets to support the overload relay portion of the starter. Kit Description Bracket for one overload relay used with horizontal mechanical interlocks, Types SM1 through SM10 Bracket for two overload relays used with vertical mechanical interlocks, Types SM2, SM4, SM5, SM9 and SM10 Class 9999 Type $ Price SO11 14.30 SO12 42.80 Table 16.366: How to Order To Order Specify: Catalog Number Class Type 9999 SM1 Class Number Type Number NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS • • 16 Type SM12 © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-123 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Accessories Fuse Block Replacement Parts Kits Class 9422, 9999 / Refer to Catalog 9420CT9701 www.schneider-electric.us Class 8538 (Series D and newer), Class 8738 (Series E and newer), and Class 8903 (Series C and newer) Type S non-fusible combination starters and lighting contactors (sizes 0–2, 30 to 60 amps) can be converted to the fusible type by installing a Class 9422 Fuse Clip Kit. Both fusible and non-fusible combination devices have the same size enclosure in NEMAs 1, 4, and 12 construction, which permits this conversion. The 9422 Fuse Clip Kits contain line and load fuse clips, load base, and fuse pullers. Table 16.367: Class 9422 Replacement Fuse Clip Kits NEMA Class H, K, J, R Fuses Device Used on Disconnect Ampere Rating Fuse Clip Ratings—Amperes Class R $ Price Fuse Clip Kits Class & Type Size or 250 V 600 V Ampere Rating Max. Max. 0, 1 & 30 A 30 0–30 — 9422TC30a 42.80 RFK03b 0, 1 & 30 A 30 31–60 0–30 9422TC33a 71.00 RFK06b 2 & 60 A 60 31–60 0–30 9422TC33 71.00 RFK06b 2 & 60 A 60 — 31–60 9422TD63 99.00 RFK06Hb When using with a 9422FTCN or FTCF disconnect switch in 8538 or 8738 combination starters, remove and discard metal base plate. No Class Number required Discount Schedule DE1. Class 9422 TC33 Fuse Block a b $ Price 32.60 34.00 36.50 34.00 Table 16.368: Class 9999 Replacement Fuse Clip Kits (8538 Pre-Series D, 8738 Pre-Series E) NEMA Class H Fuses Device Used on NEMA Class R Fuses Class 9999 Type S2 Interchangeable Fuse Clips Fuse Clip Ratings—Amperes NEMA Class J Fuses Fuse Clip Ratings— Type $ Price Type $ Price Amperes Type Size or 250 V 600 V 250 V 600 V 600 V Ampere Rating Max. Max. Max. Max. Max. 0–30 — S1 21.50 0–30 — SR1 35.60 — — 0, 1 & 30 A 30 — 0–30 S2 35.60 — 0–30 SR2 47.60 0–30 SJ2 31–60 0–30 S2 35.60 31–60 0–30 SR2 47.60 0–30 SJ2 31–60 0–30 S2 35.60 31–60 0–30 SR2 47.60 0–30 SJ2 2 & 60 A 60 — 31–60 S3 50.00 — 31–60 SR3 64.00 31–60 SJ3 61–100 61–100 S4d 144.00 61–100 61–100 SR4c 47.60 61–100 SJ4 3 & 100 A 100 101–200 — S5d 270.00 101–200 — SR4c 47.60 — — 4 & 200 A 200 101–200 101–200 S5d 270.00 101–200 101–200 SR4c 47.60 — — 5 & 300 A 400 — — — — 201–400 201–400 SR5c 107.00 — — 6 & 400, 600 A 600 — — — — 401–600 401–600 SR5c 107.00 — — c Fuse clips are not provided in the Type SR4 and SR5 kits. On new installations Class 9999 Type S fuse clips must also be purchased. Three non-removable pins are supplied and can be installed only in the latest production devices, which have a hole in the lower fuse clips. d Cannot be used in Series B or newer 8538 devices. Disconnect Ampere Rating Fuse Clip Ratings—Amperes $ Price — 105.00 105.00 105.00 125.00 201.00 — — — — Table 16.369: Class 9999 Auxiliary Contact Kits for Disconnect Switches and Circuit Breakers Class SPDT Type Type $ Price 8538, 8738 SB, SC (Series C) R45 71.00 R46 8539, 8739 SB, SC, SD, SE, SF, SG R26 131.00 R27 120.00 120.00 113.00 TC21 TC20 R7 8538 8738 8538 Class 9999 Type TC10 DPDT Type $ Price SBA, SCA, SBG, SCG (Series D) TC11 SBA, SCA, SBG, SCG (Series E) TC10 SBe, SCe, SDe (Series B) R6 SBAS8, SCAS8, SBGS8, SCGS8, TC10 8538 (Series D) 8538, 8738 SD (Series C) R43 SDA, SDAe, SDG, SDGe 8538 TC10 (Series D) 8738 SDA, SDG (Series E) TC10 8538, 8738 SE (Series B & C) R41 8538, 8738 SE, SF (Series A) R8 8538, 8738 SF (Series B & C) R39 8538, 8738 SG R35 e Class 8538 type numbers ending in suffix “S8”. Class Type 120.00 TC20 116.00 R44 207.00 Disconnect Switches BTCF, BTCN, BTDF, BTEF, 243.00 9422 BTEN 239.00 9422 TCF, TCN, TDF, TDN, TEF, TEN 239.00 9422 TF 221.00 Circuit Breaker Op. Mechs. LF, LK, LL, LM, LN, LP, LR, LT, 239.00 9421 LW 221.00 9422 RM, RN, RP, RQ, RR, RT 120.00 TC20 239.00 120.00 131.00 131.00 135.00 435.00 TC20 R42 R9 R40 R36 239.00 243.00 243.00 243.00 521.00 9422 CFA, CKA, CLA, CSF, CMP SPDT DPDT Type $ Price Type $ Price TC11 120.00 TC21 239.00 TC10 120.00 R8 87.00 TC11 R9 239.00 243.00 R47 131.00 R48 221.00 R26 131.00 R27 243.00 R26 131.00 R27 243.00 NOTE: No external auxiliary contacts are available for the following circuit breakers: GJL circuit breaker must use internal Catalog No. AAC. PowerPactTM D, H and J circuit breaker must use internal Catalog No. AAC. Table 16.370: How to Order 16 To Order Specify: • • Catalog Number Class 9999 Class Number Type Number Type R6 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-124 CP1 DE1 Discount Schedule © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection www.schneider-electric.us General All tables are based on the operation of the motor and controller in the same ambient temperature, 40oC (104oF) or less. Always be certain the correct thermal units are installed in the starter before operating the motor. Each thermal unit shall be installed such that its catalog number is visible. See page 16-129, Figure 1 for complete thermal unit installation instructions. On melting alloy thermal units the ratchet wheel must engage the pawl assembly. Selection Procedure 1. Determine motor data: a. Full load current rating b. Service factor Note: If motor full load current (FLC) is not known, a tentative thermal unit selection could be made, based on horsepower and voltage. Refer to page 16-129. Motor and controller in same ambient temperature: a. b. All starter classes, except Class 8198: 1. For 1.15 to 1.25 service factor motors use 100% of motor FLC for thermal unit selection. 2. For 1.0 service factor motors use 90% of motor FLC for thermal unit selection. Class 8198 only: 1. For 1.0 service factor motors use 100% of motor FLC for thermal unit selection. 2. For 1.15 to 1.25 service factor motors use 110% of motor FLC for thermal unit selection. 3. Motor and controller in different ambient temperatures: 4. Locate proper selection table from index, pages 16-126 and 16-127. a. a. 5. Multiply motor FLC by the multiplier in Table A. Use the resultant full load current for thermal unit selection. The proper thermal unit number will be found adjacent, to the right of the range of full load currents in which the motor FLC or resultant full load current falls. See page 16-128 for calculation of trip current rating. Table A: Selection of Thermal Units for Special Applications Slow Trip Thermal Unit Selection To select Type SB slow trip thermal units, the selection table for a standard Type B thermal unit may be used with the following modifications: For continuous rated motors having service factors of 1.15 to 1.25, select thermal units from the standard Type B table using 93% (102% for Class 8198) of the full load current shown on the motor nameplate and then substitute an SB for the B in the thermal unit type number. Example: A motor with a full load current of 12 amps controlled by an 8536SCG3 would require B22 thermal units for standard trip applications and SB19.5 thermal units for slow trip applications. The SB is selected by multiplying 12 amps times 93% for 11.16 amps and using this value to select B19.5. Then add the S prefix to arrive at SB19.5. For continuous rated motors having a service factor of 1.0, select thermal units in the same manner using 84% (93% for Class 8198) of full load current shown on the motor nameplate. NOTE: SB thermal units are used on Size 0, 1, 2 and only some Size 3 applications. Check thermal unit tables for current ranges. Ambient Temp.Comp. Relays Melting Alloy and Non-Compensated Bimetallic Relays Class of Controller Continuous Duty Motor Service Factor Ambient Temperature of Motor Same as Controller Ambient Constant 10oC (18oF) Higher Than Controller Ambient Constant 10o C (18oF) Lower Than Controller Ambient Constant 40oC (104oF) or less, for Any Controller Ambient Full Load Current Multiplier All Classes, Except 8198 Class 8198 1.15 to 1.25 1.0 0.9 1.0 0.9 1.15 to 1.25 1.0 1.1 1.0 1.05 1.0 0.8 .95 0.9 1.0 1.15 1.1 0.9 1.05 1.0 Table 16.382: Thermal Unit Prices Melting Alloy Type of Trip Standard Bimetallic $ Price 21.50 21.50 21.50 21.50 21.50 35.60 57.00 Type of Trip Standard Thermal Unit Type AR AF AU E $ Price 21.50 21.50 21.50 21.50 16 Quick Slow Thermal Unit Type A B C CC DD FB SB NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 2. © 2009 Schneider Electric All Rights Reserved CP1 Discount Schedule 16-125 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection www.schneider-electric.us NOTE: For thermal unit selection tables for other devices including obsolete devices, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). Table 16.383: Thermal Unit Selection Thermal Unit Selection Table Number Controller Hand Reset Melting Alloy Quick Trip (10) Slow Trip (30) NonCompensated Compensated 43h — — — — M–0 M–1 M–1P 1 1 1 72 72 72 j j j — — — — — — A M–0 M–1 M–1P 2 2 2 73 73 73 j j j — — — — — — — — — — 1, 2 3 4 5 65 9 10 12 — — — — j — — — — — — — — — — — B, C 00 17h — — — — 00 0 1 1P 2 3 3 4 4 5 5 6 1 Fusible 1 Circuit Breaker 2 Fusible 2 Circuit Breaker 3 Small Enclosure 3 Large Enclosure 3 4 4 5 6 1 1 COMPAC 6 2 3 4 5 5 CT 6 20–30 A 40 A 50 A 60–90 A 13 13 13 41 56 18 — 54 — 49 59 21 66 15 67 58f 16 68f — 61 — 24 20 109 104 110 111 112 113 103 114 135 145 146 149 — 74 74 — 75 76i — 77i — — 83 — 74 74 75 75 76i 76i — 77i — — — — — — — — — — — — — — — j j j j j 134ij — — — — — — — — — — 134ij 133ij — — — — — — — — — — — — — — — — — — 8 8 — 62 63 142g 11 144g 38 23 39 — 33 33 — 70 37g — 29g — 46 42 47 64 33 Class Type Seriesa Manual Starters FHP Manual Starters (Small Enclosure) Manual Starters (Large Enclosure) DC Magnetic Starters EC & M Crane Control Product 2510 2512 8908 F A FHP 2510 M, T A 2510 2511 2512 8925 M, T C, D E F G A (8536 only) SA SB 7135 7136 7735 7736 8536 8904b (Starter In Own Enclosure) AC Magnetic Starters (Small Enclosure) SH A, B A A A A A B A B A Bl A, B SC A SD A 8933 SC 8998 8999 (Model 3 Control Center) I-LINE® and QMB Motor Starter Centers SD 8998 8999 (Model 4 Control Center) SE SF SG SE SF SG SH 8998 (Model 5 and Model 6 MCCs) 8911 A B A B A A SCk A SDk SEk SFk SHk A A A A B A DPSG A SGk Bimetallic Standard Trip (20) Starter Type Size 57 70 51 37g 141g 35 143g 52 48 — — — — — — — — — — — — — 29f — 46 47 97 — 98 99g 100g 101 — 102 — — — — Table continued on the next page; see page 16-127 for Footnotes. NOTE: For thermal unit selection tables for other devices including obsolete devices, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). 16 Thermal Unit Prices . . . . . . . . . . . . . . . . . page 16-125. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-126 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection www.schneider-electric.us Table 16.384: Thermal Unit Selection Thermal Unit Selection Table Number Controller Hand Reset Melting Alloy Bimetallic Standard Quick Trip Slow Trip NonCompensated Trip (10) (30) Compensated 8198 G, S — — 5 — j — 6 A (8536 only) B, C 00 14h — — — — 8536 SA A, B 00 53 — j 55 25 (Starter Used in SB, NB A 0 15 78 j 64 33 Multi-Motor Panel) 8538 8904e SC, NC A 1 15 78 j 64 33 8539 8906 SD, ND A 2 58 79 j 57 70 8606 8907 A 3 16 80i 133ij 51 37g 8630c 8920 SE, NE 8640d 8922 B 3 — — — 141g — 9089 8924 A 4 61 81i — 35 29g 8647 8925 SF, NF B 4 — — — 143g — 8650 8930 8736 8941 A 5 24 — — 52 46 SG 8738 Bl 5 59 83 — 23 42 8739 SH A, B 6 20 — j 48 47 CB, DB, SB, UB A 0 15 78 j 64 33 CC, DC, SC, UC A 1 15 78 j 64 33 AC CD, DD, SD, UD A 2 58 79 j 57 70 Magnetic CE, DE, SE, UE A 3 16 80i 133ij 51 37g Starters 8810 CF, DF, SF, UF A 4 61 81i — 35 29g (Large 8811 SE B 3 — — — 141g — Enclosure) 8812 SF B 4 — — — 143g — 5 24 — — 52 46 A CG, DG, SG, UG Bl 5 59 83 — 23 42 CH, DH, SH, UH A 6 20 — j 48 47 WC, XC A 1 13 78 — — 33 WD, XD, MD, RD, A 2 56 79 — — 70 WE, XE, ME, RE, A 3 18 80i — — 37g 8940 ® WELL-GUARD PF, WF, XF, MF, RF, A 4 54 81i — — 29g Control A 5 — — — — 46 XSG, NSG, MG,RG, VGh Bl 5 — — — — 42 XSH, VH A 6 — — — — 47 20–30 A 136 — — — — 40 A 147 — — — — 8911 DPSO A 50 A 148 — — — — 60–90 A 150 — — — — SCk A 1 127 — — — 121 SDk A 2 128 — — — 122 AC 8998 SEk A 3 129 — — — 123g Magnetic (Model 5 and PartSF A 4 105 — — — 117g Model 6 MCCs) Winding A 5 115 — — — 118 SG Bl 5 CT 116 — — — — AF B 4(133 A) — — — 30 — AG A 5(266 A) — — — 36 — AR A 1(25 A) — — — 32 — AT A 2(45 A) — — — 60 — AU — 3(86 A) — — — 50 — DA2 A 1(25 A) — — — — 140g GA2 A 2(60 A) — — — — 139g HA2 A 3(100 A) — — — — 138g Separately JA2 A 4(180 A) — — — — 137g Mounted 9065 C A 1(25 A) 44 82 j — — Overload F B 4(133 A) 19 85i — — — Relays G A 5(266 A) 22 — — — — MEO A (32 A) 86 — — — — 1(26 A) 59 83 j 23 42 2(45 A) 69 84 j 27 71 S A 3(86 A) 34 — — — — 4(133 A) 28 — — — — T A 2(45 A) 31 — j — — U — 3(86 A) 40 — — — — a Series letters listed refer to the marking on the nameplate of the basic open type starter. When the starter is supplied in a controller containing other devices, the controller may have a different series letter marked on the enclosure nameplate. b Small enclosure tables apply for Class 8904 non-combination and non-reversing starters. For combination and reversing Class 8904 starters refer to the large enclosure selections, index above. c For Class 8630 starters divide the delta connected motor full load current by 1.73, and use this quotient to select thermal units. d For Class 8640 and Class 8940 (MD, PD, ME, PE, MF, PF, MG and PG) starters use the full load current of each motor winding as a basis for thermal unit selection—normally one-half total motor current. e Large enclosure tables apply for Class 8904 combination and reversing starters. For non-combination and non-reversing Class 8904 starters refer to small enclosure selections, page 16-126. f Use for Autotransformer Starters (Fusible and Circuit Breaker). g Order Type E thermal units by number from Square D/Schneider Electric, Furnas Electric Company, Batavia, Illinois or a Furnas distributor at $13.50 each, subject to motor control discounts. h Type A thermal units for full load currents lower than those listed in this table are available. For complete information, consult Square D/Schneider Electric CIC at 1-888-SquareD (1-888-778-2733). i Form Y81 must be specified to use quick trip (Class 10) or slow trip (Class 30) thermal units on Size 3 starters and quick trip (Class 10) thermal units on Size 4 starters. j This device will accept Type SB slow trip (Class 30) thermal units. For selection, see page 16-125. k Refers to type number of starter in MCC, not actual type number of MCC. l Divide the motor FLC by 60 and use this quotient to select the appropriate thermal units. Type Seriesa Size NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Class 16 Starter Type © 2009 Schneider Electric All Rights Reserved 16-127 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection www.schneider-electric.us Calculation of Trip Current Rating Trip Current Rating—Trip current rating is a nominal value which approximates the minimum current to trip an overload relay in an ambient temperature, outside of the enclosure, of 40oC (104oF). In all selection tables except Class 8198, the trip current rating is 1.25 times the minimum full load current shown for the thermal unit selected. For Class 8198, the trip current rating is 1.15 times the minimum full load current. This applies to bimetallic overload relays with the trip adjustment set at 100 percent. Calculation Procedure 1. Use the selection table for the specific controller involved. 2. Find the minimum motor full load current listed for the thermal unit in question. 3. Multiply that current by 1.25 (1.15 for Class 8198). The result is the trip current rating. Example 1: Determine the thermal unit selection and trip current rating for thermal units in a Class 8536 Type SCG3 Size 1 magnetic starter used to control a three-phase, 1.15 service factor motor with a full load current of 17.0 Amperes, where the motor and controller are both located in a 40oC (104oF) ambient temperature. 1. From Table 13 the proper selection is B32. 2. The minimum motor full load current is 16. 0 Amperes. 3. Trip current rating is 16.0 x 1.25= 20.0 Amperes. Protection Level is the relationship between trip current rating and full load current. Protection level, in percent, is the trip current rating divided by the motor full load current times 100. In Example 1 the protection level for the B32 thermal unit is: 20.0/17.0 x 100=118%. National Electrical Code, Section 430-32, allows a maximum protection level of 125% for the motor in the above example. Minimum Trip Current (also called ultimate current) may vary from the trip current rating value, since ratings are established under standardized test conditions. Factors which influence variations include: the number of thermal units installed, enclosure size, proximity to heat producing devices, size of conductors installed, ambient (room) temperature, and others. Except for ambient temperature-compensated overload relays, an ambient temperature higher than 40oC would lower the trip current, and a lower temperature would increase it. This variation is not a factor in selecting thermal units for the average application, since most motor ratings are based on an ambient temperature of 40oC, and motor capacity varies with temperature in about the same proportion as the change in trip current. Temperature-compensated relays maintain a nearly constant trip current over a wide range of ambient temperature, and are intended for use where the relay, because of its location, cannot sense changes in the motor ambient temperature. Calculation of Trip Current For Ambient Temperatures Other Than 40oC For a controller ambient temperature other than 40oC (104oF) trip current can be calculated by applying a correction factor from the curve in Figure 1. The approximate trip current for a particular ambient temperature is the product of (1) the multiplier M corresponding to the temperature and (2) the 40oC trip current rating. NOTE: Ambient temperature is the temperature surrounding the starter enclosure. Normal temperature rise inside the enclosure has been taken into account in preparing the thermal unit selection tables. Example 2: Determine the trip current for the motor and controller in Example 1, except the controller is in a 30oC (86oF) ambient temperature. From the curve in Figure 1 the multiplier M is 1.1 at 30oC. Approximate Trip Current is 16.0 x 1.25 x 1.1=22 Amperes 212 194 176 158 140 122 104 86 68 50 32 14 16 -4 Ambient Temperature Correction Curve for Thermal Overload Relays 100 Ambient Temp - Degrees Centigrade Ambient Temp - Equiv. Degrees Farenheit . 80 60 40 20 0 0 02 04 06 08 10 12 14 -20 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-128 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection www.schneider-electric.us Approximate Thermal Unit Selection Based On Horsepower and Voltage General—Thermal units selected using approximate full load currents from the table below will provide a trip current between 101% and 125% of full load current for many 4-pole, single speed, normal torque, 60 Hz motors. Since full load current rating of different makes and types of motors vary so widely, these selections may not be suitable. Thermal units should be selected on the basis of motor nameplate full load current and service factor. Thermal unit sizes originally selected on an approximate basis should always be rechecked and corrected at the time of installation if required. Instructions: 1. 2. 3. Locate motor horsepower and voltage. Determine approximate full load current from the table below. Use approximate full load current in place of actual nameplate full load current and follow instructions on page 16-125. Only Use This Table When Motor Full Load Current Is Not Known Table 16.385: Motor Full Load Current Motor Horsepower Three Ø Single Ø 200 V 230 V 460 V 575 V 115 V 230 V 1/20 0.39 0.34 0.17 0.14 1.30 0.65 1/12 0.55 0.48 0.24 0.19 1.90 0.95 1/8 0.74 0.64 0.32 0.26 2.60 1.30 1/6 0.90 0.78 0.39 0.31 3.24 1.62 1/4 1.22 1.06 0.53 0.42 4.40 2.20 1/3 1.52 1.32 0.66 0.53 5.47 2.74 1/2 2.07 1.80 0.90 0.72 7.45 3.73 3/4 2.88 2.50 1.25 1.00 10.1 5.07 1 3.68 3.20 1.60 1.28 12.6 6.31 1-1/2 5.18 4.50 2.25 1.80 17.2 8.59 2 6.67 5.80 2.90 2.32 21.4 10.7 3 9.66 8.40 4.20 3.36 29.1 14.5 5 15.4 13.4 6.68 5.35 42.9 21.4 7-1/2 22.6 19.6 9.82 7.86 58 29.2 10 29.7 25.8 12.9 10.3 — 36.3 15 43.6 38.0 19.0 15.2 — 49.9 20 57.4 49.9 24.9 20.0 — — 25 70.9 61.7 30.8 24.7 — — 30 84.3 73.3 36.7 29.3 — — 40 111. 96.4 48.2 38.5 — — 50 137. 119. 59.6 47.6 — — 60 163. 142. 70.8 56.6 — — 75 201. 175. 87.6 70.0 — — 100 265. 230. 115. 92.0 — — 125 327. 284. 142. 114. — — 150 389. 338. 169. 135. — — 200 511. 445. 222. 178. — — NOTE: These currents should not be used for selection of fuses, circuit breakers or wire sizes. See NEC tables 430-248 through 430-250. For motors rated 208-220 volts, use 230 V column. For motors rated 440 to 550 volts, use 460 and 575 V columns, respectively. Always be certain the correct thermal units are installed in the starter before operating the motor. Thermal units should always be mounted so that their type designation can be read from the front of the starter (see Figure 1). Melting alloy thermal units should be mounted so that the tooth of the pawl assembly can engage the teeth of the ratchet wheel when the reset button is pushed. Mounting surfaces of starter and thermal units should be clean and care should be taken to insure that thermal unit mounting screws are fastened securely. 16 Figure 1 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Mounting Thermal Units © 2009 Schneider Electric All Rights Reserved 16-129 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 1–6 www.schneider-electric.us Table 1 Table 2 Motor FLC (A) 1 T.U. 3 T.U. 0.33–0.36 0.37–0.40 0.41–0.45 0.46–0.52 0.53–0.59 0.60–0.66 0.67–0.73 0.74–0.81 0.82–0.91 0.92–1.02 1.03–1.14 1.15–1.29 1.20–1.42 1.43–1.64 1.65–1.80 1.81–2.10 2.11–2.30 2.31–2.61 2.62–2.99 3.00–3.37 3.38–3.94 3.95–4.24 4.25–4.54 4.55–5.29 5.30–5.73 5.74–6.35 6.36–7.08 7.09–7.83 7.84–8.47 8.48–9.83 9.84–10.5 10.6–11.4 11.5–12.8 12.9–13.9 14.0–16.1 16.2–18.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 0.29–0.32 0.33–0.36 0.37–0.39 0.40–0.47 0.48–0.56 0.57–0.63 0.64–0.69 0.70–0.77 0.78–0.86 0.87–0.96 0.97–1.11 1.12–1.23 1.24–1.37 1.38–1.55 1.56–1.75 1.76–1.92 1.93–2.16 2.17–2.50 2.51–2.81 2.82–3.16 3.17–3.40 3.41–3.76 3.77–4.00 4.01–4.68 4.69–5.18 5.19–5.51 5.52–6.19 6.20–7.12 7.13–8.15 8.16–8.60 8.61–9.21 9.22–10.1 10.2–11.2 11.3–12.0 — — Following Selections for Size M-1 & M-1P Only. — 11.3–12.1 — 12.2–13.6 16.2–17.6 13.7–15.3 17.7–20.6 15.4–17.3 20.7–23.1 17.4–19.1 23.2–26.0 19.2–21.7 — 21.8–24.2 — 24.3–26.0 Following Selections for Size M-1P Only 23.2–27.1 — 27.2–29.2 — 29.3–33.0 — 33.1–36.0 — B B B B B B B B 19.5 22.0 25.0 28.0 32.0 36.0 40.0 45.0 B B B B 36.0 40.0 45.0 50.0 Table 3 Motor FLC (A) 1 T.U. 3 T.U. 0.35–0.38 0.30–0.32 0.39–0.43 0.33–0.37 0.44–0.48 0.38–0.39 0.49–0.56 0.40–0.48 0.57–0.63 0.49–0.57 0.64–0.71 0.58–0.64 0.72–0.78 0.65–0.70 0.79–0.88 0.71–0.78 0.89–0.99 0.79–0.87 1.00–1.15 0.88–0.98 1.16–1.23 0.99–1.13 1.24–1.43 1.14–1.25 1.44–1.51 1.26–1.40 1.52–1.75 1.41–1.58 1.76–1.93 1.59–1.79 1.94–2.25 1.80–1.91 2.26–2.47 1.92–2.20 2.48–2.81 2.21–2.55 2.82–3.20 2.56–2.87 3.21–3.63 2.88–3.24 3.64–4.19 3.25–3.48 4.20–4.53 3.49–3.85 4.54–4.89 3.86–4.10 4.90–5.68 4.11–4.79 5.69–6.27 4.80–5.31 6.28–6.85 5.32–5.65 6.86–7.73 5.66–6.35 7.74–8.50 6.36–7.31 8.51–9.29 7.32–8.34 9.30–10.4 8.35–8.84 10.5–11.3 8.85–9.47 11.4–12.3 9.48–10.4 12.4–13.9 10.5–11.5 14.0–15.0 11.6–12.0 15.1–18.0 — Following Selections for Size M-1 & M-1P Only. — 11.6–12.4 15.1–17.4 12.5–14.0 17.5–19.2 14.1–15.8 19.3–22.0 15.9–17.8 22.1–24.6 17.9–19.7 24.7–26.0 19.8–22.4 — 22.5–25.1 — 25.1–26.0 Following Selections for Size M-1P Only. 24.7–29.1 — 29.2–31.7 — 31.8–36.0 — Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B B B B B B B B Table 4 Motor FLC (A) 1 T.U. 3 T.U. 0.29–0.31 0.28–0.29 0.32–0.36 0.30–0.33 0.37–0.39 0.34–0.36 0.40–0.47 0.37–0.44 0.48–0.56 0.45–0.52 0.57–0.63 0.53–0.59 0.64–0.69 0.60–0.64 0.70–0.77 0.65–0.71 0.78–0.86 0.72–0.80 0.87–0.97 0.81–0.90 0.98–1.12 0.91–1.03 1.13–1.24 1.04–1.14 1.25–1.39 1.15–1.27 1.40–1.57 1.28–1.44 1.58–1.78 1.45–1.63 1.79–1.96 1.64–1.79 1.97–2.20 1.80–2.01 2.21–2.41 2.02–2.19 2.42–2.75 2.20–2.52 2.76–3.25 2.53–2.95 3.26–3.50 2.96–3.17 3.51–3.87 3.18–3.50 3.88–4.13 3.51–3.73 4.14–4.69 3.74–4.22 4.70–5.20 4.23–4.68 5.21–5.53 4.69–4.98 5.54–6.23 4.99–5.59 6.24–7.18 5.60–6.43 7.19–8.20 6.44–7.41 8.21–8.98 7.42–8.02 8.99–9.63 8.03–8.59 9.64–10.6 8.60–9.52 10.7–11.8 9.53–10.5 11.9–12.7 10.6–11.2 12.8–14.3 11.3–12.0 14.4–16.1 — 16.2–18.0 — Following Selections for Size M-1 & M-1P Only. — 11.3–12.7 — 12.8–14.3 16.2–18.3 14.4–16.1 18.4–20.2 16.2–17.8 20.3–23.0 17.9–20.1 23.1–26.0 20.2–22.6 — 22.7–25.5 — 25.6–26.0 Following Selections for Size M-1P Only 25.9–29.0 — 29.1–30.8 — 30.9–32.7 — 32.8–36.0 — 19.5 22.0 25.0 28.0 32.0 36.0 40.0 45.0 B 36.0 B 40.0 B 45.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B B B B B B B B B B B B 22.0 25.0 28.0 32.0 36.0 40.0 45.0 50.0 45.0 50.0 56.0 62.0 Motor FLC (A) 1 T.U. 3 T.U. 0.32–0.33 0.34–0.38 0.39–0.41 0.42–0.50 0.51–0.61 0.62–0.68 0.69–0.74 0.75–0.83 0.84–0.93 0.94–1.05 1.06–1.21 1.22–1.34 1.35–1.50 1.51–1.70 1.71–1.93 1.94–2.12 2.13–2.38 2.39–2.61 2.62–2.99 3.00–3.53 3.54–3.80 3.81–4.21 4.22–4.49 4.50–5.10 5.11–5.66 5.67–6.03 6.04–6.79 6.80–7.84 7.85–8.96 8.97–9.82 9.83–10.4 10.5–11.6 11.7–12.9 13.0–13.9 14.0–15.7 15.8–18.0 0.29–0.30 0.31–0.35 0.36–0.37 0.38–0.45 0.46–0.54 0.55–0.61 0.62–0.66 0.67–0.74 0.75–0.83 0.84–0.93 0.94–1.07 1.08–1.19 1.20–1.33 1.34–1.51 1.52–1.70 1.71–1.87 1.88–2.10 2.11–2.29 2.30–2.63 2.64–3.09 3.10–3.32 3.33–3.67 3.68–3.91 3.92–4.43 4.44–4.91 4.92–5.23 5.24–5.88 5.89–6.77 6.78–7.90 7.91–8.44 8.45–9.05 9.06–9.99 10.0–11.0 11.1–11.9 12.0–12.0 — Following Selections for Size M-1 & M-1P Only. — 12.0–13.4 — 13.5–15.1 17.8–20.1 15.2–17.0 20.2–22.2 17.1–18.9 22.3–25.3 19.0–21.4 25.4–26.0 21.5–24.0 — 24.1–26.0 Following Selections for Size M-1P Only. 25.4–28.4 — 28.5–33.1 — 33.2–36.0 — Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B B B B B B B 22.0 25.0 28.0 32.0 36.0 40.0 45.0 B 40.0 B 45.0 B 50.0 Table 5 Current Transformer Ratio 25/5 50/5 75/5 100/5 10.6–11.7 11.8–13.2 13.3–14.8 14.9–17.2 17.3–19.6 19.7–22.3 21.1–23.6 23.7–26.5 26.6–29.6 29.7–34.5 34.6–39.2 39.3–44.6 31.7–35.4 35.5–39.8 39.9–44.5 44.6–51.8 51.9–58.9 59.0–67.0 42.3–47.2 47.3–53.1 53.2–59.4 59.5–69.2 69.3–78.6 78.7–89.3 25/5 50/5 75/5 100/5 10.6–11.9 12.0–13.4 13.5–15.0 15.1–16.6 16.7–18.7 18.8–20.7 20.8–22.8 21.2–23.9 24.0–26.9 27.0–30.0 30.1–33.4 33.5–37.5 37.6–41.4 41.5–45.7 31.8–35.9 36.0–40.3 40.4–45.1 45.2–50.1 50.2–56.3 56.4–62.2 62.3–68.5 42.4–47.9 48.0–53.8 53.9–60.1 60.2–66.9 67.0–75.1 75.2–82.9 83.0–91.4 150/5 200/5 Motor FLC 63.4–70.9 84.5–94.6 71.0–79.7 94.7–105. 79.8–89.1 106.–118. 89.2–103. 119.–138. 104.–117. 139.–156. 118.–133. 157.–178. Thermal Unit Number 250/5 300/5 400/5 500/5 106.–117. 118.–132. 133.–148. 149.–172. 173.–196. 197.–223. 127.–141. 142.–159. 160.–177. 178.–207. 208.–235. 236.–267. 169.–188. 189.–212. 213.–237. 238.–276. 277.–314. 315.–357. 211.–236. 237.–265. 266.–296. 297.–345. 346.–360. — 250/5 300/5 400/5 500/5 Thermal Unit Number 106.–119. 120.–134. 135.–150. 151.–166. 167.–187. 188.–207. 208.–228. 127.–143. 144.–161. 162.–180. 181.–200. 201.–225. 226.–248. 249.–274. 170.–191. 192.–215. 216.–240. 241.–267. 268.–300. 301.–331. 332.–365. 212.–239. 240.–269. 270.–300. 301.–334. 335.–360. — — AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 B B B B B B 3.00 3.30 3.70 4.15 4.85 5.50 Table 6 Current Transformer Ratio 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-130 150/5 200/5 Motor FLC 63.6–72.0 84.8–96.0 72.1–80.8 96.1–107. 80.9–90.2 108.–119. 90.3–99.9 120.–133. 100.–112. 134.–149. 113.–124. 150.–165. 125.–136. 166.–182. Index and Instructions: pages 16-125—16-129 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 8–12 www.schneider-electric.us Table 8 Table 9 Motor FLC (A) 2.T.U.1Ø 0.37–0.39 0.40–0.42 0.43–0.46 0.47–0.50 0.51–0.54 0.55–0.59 0.60–0.65 0.66–0.71 0.72–0.78 0.79–0.86 0.87–0.94 0.95–1.04 1.05–1.14 1.15–1.25 1.26–1.42 1.43–1.62 1.63–1.75 1.76–1.91 1.92–2.07 2.08–2.25 2.26–2.47 2.48–2.73 2.74–2.99 3.00–3.31 3.32–3.71 3.72–4.15 4.16–4.65 4.66–5.11 5.12–5.68 5.69–6.24 6.25–7.15 7.16–7.84 7.85–8.56 8.57–9.40 9.41–10.2 10.3–10.7 10.8–12.2 12.3–14.1 14.2–15.9 16.0–18.0 — — — 16.0–18.1 18.2–20.8 20.9–23.6 23.7–26.0 — — 2 T.U.2Ø 3 T.U. 0.37–0.39 0.30–0.31 0.40–0.42 0.32–0.34 0.43–0.46 0.35–0.37 0.47–0.50 0.38–0.41 0.51–0.54 0.42–0.45 0.55–0.59 0.46–0.49 0.60–0.65 0.50–0.54 0.66–0.71 0.55–0.56 0.72–0.78 0.57–0.62 0.79–0.86 0.63–0.68 0.87–0.94 0.69–0.75 0.95–1.04 0.76–0.82 1.05–1.14 0.83–0.91 1.15–1.25 0.92–1.00 1.26–1.42 1.01–1.18 1.43–1.62 1.19–1.30 1.63–1.75 1.31–1.41 1.76–1.91 1.42–1.53 1.92–2.07 1.54–1.69 2.08–2.25 1.70–1.79 2.26–2.47 1.80–2.02 2.48–2.73 2.03–2.19 2.74–2.99 2.20–2.43 3.00–3.31 2.44–2.81 3.32–3.71 2.82–3.12 3.72–4.15 3.13–3.47 4.16–4.65 3.48–3.89 4.66–5.11 3.90–4.30 5.12–5.68 4.31–4.69 5.69–6.24 4.70–5.19 6.25–7.15 5.20–5.93 7.16–7.84 5.94–6.45 7.85–8.56 6.46–7.08 8.57–9.40 7.09–7.71 9.41–10.2 7.72–8.39 10.3–10.7 8.40–8.64 10.8–12.2 8.65–9.74 — 9.75–11.0 — 11.1–12.0 — — Following Selections for Size 1 Only 10.8–12.2 — 12.3–14.1 — 14.2–15.9 11.1–12.4 16.0–18.1 12.5–13.9 18.2–20.8 14.0–15.9 20.9–23.6 16.0–17.7 23.7–26.0 17.8–20.3 — 20.4–22.8 — 22.9–26.0 Thermal Unit Number AR .45 AR .49 AR .54 AR .59 AR .65 AR .71 AR .78 AR .86 AR .95 AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR AR AR AR AR AR AR AR AR 13.6 15.4 17.6 20.5 23.0 27.0 30.0 35.0 40.0 Thermal Unit Number C 20.0 C 22.0 C 26.0 C 30.0 C 34.0 C 40.0 C 42.0 C 45.0 C 51.0 C 58.0 C 66.0 C 75.0 C 83.0 C 90.0 C 103.0 C 114.0 Motor FLC (A) 15.3–16.7 16.8–19.8 19.9–22.8 22.9–25.8 25.9–30.4 30.5–31.9 32.0–34.2 34.3–38.8 38.9–44.2 44.3–50.2 50.3–57.1 57.2–63.2 63.3–68.6 68.7–78.6 78.7–86.9 87.0–100.0 Table 10 Thermal Unit Number CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 Motor FLC (A) 43.6–47.3 47.4–51.3 51.4–54.6 54.7–59.7 59.8–65.1 65.2–70.1 70.2–75.1 75.2–82.2 82.3–89.2 89.3–96.5 96.6–104. 105.–113. 114.–123. 124.–132. 133.–150. Table 11 Motor FLC (A) 2 T.U. 3 T.U. 33.0–36.1 36.2–40.2 40.3–44.5 45.6–51.3 51.4–58.5 58.6–62.6 62.7–71.3 71.4–77.1 77.2–86.9 87.0–93.3 93.4–102. 103.–107. 108.–112. 113.–121. 122.–123. 124.–133. ——— 30.5–33.4 33.5–37.1 37.2–42.0 42.1–47.0 47.1–53.5 53.6–57.5 57.6–64.4 64.5–69.4 69.5–77.4 77.5–83.6 83.7–92.9 93.0–100. 101.–104. 105.–115. 116.–119. 120.–123. 124.–133. Thermal Unit Number AU 44.0 AU 50.0 AU 56.0 AU 64.0 AU 72.0 AU 81.0 AU 88.0 AU 99.0 AU 110.0 AU 123.0 AU 135.0 AU 152.0 AU 169.0 AU 183.0 AU 198.0 AU 217.0 AU 235.0 Table 12 16 92.–100. 101.–109. 110.–119. 120.–131. 132.–139. 140.–156. 157.–166. 167.–180. 181.–189. 190.–209. 210.–225. 226.–238. 239.–263. 264.–300. Thermal Unit Number DD 112.0 DD 121.0 DD 128.0 DD 140.0 DD 150.0 DD 160.0 DD 185.0 DD 213.0 DD 220.0 DD 230.0 DD 250.0 DD 265.0 DD 280.0 DD 300.0 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Motor FLC (A) © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-131 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 13–18 www.schneider-electric.us Table 13 Table 15 Motor FLC (A) 1.T.U. 2 T.U. 3 T.U. 0.29–0.31 0.29–0.31 0.28–0.30 0.32–0.34 0.32–0.34 0.31–0.34 0.35–0.38 0.35–0.38 0.35–0.37 0.39–0.45 0.39–0.45 0.38–0.44 0.46–0.54 0.46–0.54 0.45–0.53 0.55–0.61 0.55–0.61 0.54–0.59 0.62–0.66 0.62–0.66 0.60–0.64 0.67–0.73 0.67–0.73 0.65–0.72 0.74–0.81 0.74–0.81 0.73–0.80 0.82–0.94 0.82–0.94 0.81–0.90 0.95–1.05 0.95–1.05 0.91–1.03 1.06–1.22 1.06–1.22 1.04–1.14 1.23–1.34 1.23–1.34 1.15–1.27 1.35–1.51 1.35–1.51 1.28–1.43 1.52–1.71 1.52–1.71 1.44–1.62 1.72–1.93 1.72–1.93 1.63–1.77 1.94–2.14 1.94–2.14 1.78–1.97 2.15–2.40 2.15–2.40 1.98–2.32 2.41–2.72 2.41–2.72 2.33–2.51 2.73–3.15 2.73–3.15 2.52–2.99 3.16–3.55 3.16–3.55 3.00–3.42 3.56–4.00 3.56–4.00 3.43–3.75 4.01–4.40 4.01–4.40 3.76–3.98 4.41–4.88 4.41–4.88 3.99–4.48 4.89–5.19 4.89–5.19 4.49–4.93 5.20–5.73 5.20–5.73 4.94–5.21 5.74–6.39 5.74–6.39 5.22–5.84 6.40–7.13 6.40–7.13 5.85–6.67 7.14–7.90 7.14–7.90 6.68–7.54 7.91–8.55 7.91–8.55 7.55–8.14 8.56–9.53 8.56–9.53 8.15–8.72 9.54–10.6 9.54–10.6 8.73–9.66 10.7–11.8 10.7–11.8 9.67–10.5 11.9–13.2 11.9–12.0 10.6–11.3 13.3–14.9 — 11.4–12.0 15.0–16.6 — — 16.7–18.0 — — Following Selections for Size 1 Only — 11.9–13.2 — — 13.3–14.9 11.4–12.7 — 15.0–16.6 12.8–14.1 16.7–18.9 16.7–18.9 14.2–15.9 19.0–21.2 19.0–21.2 16.0–17.5 21.3–23.0 21.3–23.0 17.6–19.7 23.1–25.5 23.1–25.5 19.8–21.9 25.6–26.0 25.6–26.0 22.0–24.4 — — 24.5–26.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B B B B B B B B B 19.5 22.0 25.0 28.0 32.0 36.0 40.0 45.0 50.0 1.T.U. 2 T.U. 3 T.U. 0.31–0.33 0.31–0.33 0.29–0.31 0.34–0.36 0.34–0.36 0.32–0.36 0.37–0.40 0.37–0.40 0.37–0.38 0.41–0.48 0.41–0.48 0.39–0.46 0.49–0.57 0.49–0.57 0.47–0.55 0.58–0.64 0.58–0.64 0.56–0.61 0.65–0.70 0.65–0.70 0.62–0.66 0.71–0.77 0.71–0.77 0.67–0.75 0.78–0.85 0.78–0.85 0.76–0.83 0.86–0.99 0.86–0.99 0.84–0.93 1.00–1.10 1.00–1.10 0.94–1.06 1.11–1.28 1.11–1.28 1.07–1.18 1.29–1.41 1.29–1.41 1.19–1.31 1.42–1.58 1.42–1.58 1.32–1.47 1.59–1.80 1.59–1.80 1.48–1.67 1.81–2.03 1.81–2.03 1.68–1.83 2.04–2.25 2.04–2.25 1.84–2.04 2.26–2.51 2.26–2.51 2.05–2.38 2.52–2.83 2.52–2.83 2.39–2.60 2.84–3.29 2.84–3.29 2.61–3.13 3.30–3.75 3.30–3.75 3.14–3.59 3.76–4.22 3.76–4.22 3.60–3.94 4.23–4.65 4.23–4.65 3.95–4.19 4.66–5.16 4.66–5.16 4.20–4.72 5.17–5.53 5.17–5.53 4.73–5.21 5.54–6.09 5.54–6.09 5.22–5.51 6.10–6.80 6.10–6.80 5.52–6.17 6.81–7.60 6.81–7.60 6.18–7.07 7.61–8.35 7.61–8.35 7.08–8.05 8.36–9.04 8.36–9.04 8.06–8.69 9.05–9.99 9.05–9.99 8.70–9.32 10.0–11.1 10.0–11.1 9.33–10.2 11.2–12.3 11.2–12.0 10.3–11.3 12.4–13.7 — 11.4–12.0 13.8–15.4 — — 15.5–18.0 — — Following Selections for Size 1 Only — 11.2–12.3 — — 12.4–13.7 11.4–12.1 — 13.8–15.4 12.2–13.7 15.5–17.2 15.5–17.2 13.8–15.2 17.3–19.4 17.3–19.4 15.3–17.2 19.5–21.7 19.5–21.7 17.3–18.9 21.8–23.9 21.8–23.9 19.0–21.4 24.0–26.0 24.0–26.0 21.5–23.7 — — 23.8–26.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B B B B B B B B B 17.5 19.5 22.0 25.0 28.0 32.0 36.0 40.0 45.0 Table 16 Table 14 Motor FLC (A) Motor FLC (A) 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 1.T.U. 2 T.U. 3 T.U. 0.43–0.47 0.48–0.51 0.52–0.56 0.57–0.64 0.65–0.69 0.70–0.76 0.77–0.84 0.85–0.91 0.92–1.01 1.02–1.15 1.16–1.23 1.24–1.37 1.38–1.45 1.46–1.56 1.57–1.67 1.68–1.77 1.78–1.92 1.93–2.09 2.10–2.31 2.32–2.56 2.57–2.92 2.93–3.16 3.17–3.48 3.49–3.83 3.84–4.24 4.25–4.62 4.63–4.92 4.93–5.61 5.62–5.85 5.86–6.36 6.37–6.99 7.00–7.67 7.68–8.15 8.16–9.00 0.41–0.45 0.46–0.50 0.51–0.55 0.56–0.62 0.63–0.67 0.68–0.72 0.73–0.81 0.82–0.88 0.89–0.97 0.98–1.08 1.09–1.18 1.19–1.32 1.33–1.40 1.41–1.48 1.49–1.60 1.61–1.72 1.73–1.84 1.85–2.00 2.01–2.22 2.23–2.45 2.46–2.82 2.83–3.08 3.09–3.39 3.40–3.75 3.76–4.16 4.17–4.51 4.52–4.83 4.84–5.49 5.50–5.67 5.68–6.16 6.17–6.75 6.76–7.00 — — 0.40–0.41 0.42–0.46 0.47–0.51 0.52–0.57 0.58–0.62 0.63–0.67 0.68–0.75 0.76–0.80 0.81–0.89 0.90–1.02 1.03–1.09 1.10–1.21 1.22–1.29 1.30–1.37 1.38–1.48 1.49–1.58 1.59–1.72 1.73–1.85 1.86–2.05 2.06–2.29 2.30–2.62 2.63–2.84 2.85–3.10 3.11–3.46 3.47–3.85 3.86–4.16 4.17–4.46 4.47–5.08 5.09–5.35 5.36–5.82 5.83–6.34 6.35–6.95 6.96–7.00 — 16-132 Table 17 Motor FLC (A) Thermal Unit Number A .49 A .54 A .59 A .65 A .71 A .78 A .86 A .95 A 1.02 A 1.16 A 1.25 A 1.39 A 1.54 A 1.63 A 1.75 A 1.86 A 1.99 A 2.15 A 2.31 A 2.57 A 2.81 A 3.61 A 3.95 A 4.32 A 4.79 A 5.30 A 5.78 A 6.20 A 6.99 A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 1.T.U. 2 T.U. 3 T.U. 16.2–17.5 17.6–18.8 18.9–20.5 20.6–22.2 22.3–23.7 23.8–25.4 25.5–27.3 27.4–29.3 29.4–31.5 31.6–33.9 34.0–36.2 36.3–39.3 39.4–42.3 42.4–45.3 45.4–48.3 48.4–52.0 52.1–54.9 55.0–59.7 59.8–65.4 65.5–69.6 69.7–74.8 74.9–79.7 79.8–83.1 83.2–86.0 — — — — 15.1–16.2 16.3–17.3 17.4–19.5 19.6–20.7 20.8–22.3 22.4–24.0 24.1–25.7 25.8–27.5 27.6–29.6 29.7–31.7 31.8–33.9 34.0–36.6 36.7–39.3 39.4–42.3 42.4–44.9 45.0–48.3 48.4–50.9 51.0–55.5 55.6–59.9 60.0–64.2 64.3–68.7 68.8–71.4 71.5–74.8 74.9–78.0 78.1–80.7 80.8–86.0 — — 14.3–15.4 15.5–16.4 16.5–18.5 18.6–19.6 19.7–21.1 21.2–22.7 22.8–24.4 24.5–26.1 26.2–28.1 28.2–30.0 30.1–32.1 32.2–34.7 34.8–37.3 37.4–40.1 40.2–42.6 42.7–45.8 45.9–48.3 48.4–52.6 52.7–56.8 56.9–60.9 61.0–65.1 65.2–67.7 67.8–70.9 71.0–73.9 74.0–76.5 76.6–80.2 80.3–83.1 83.2–86.0 Thermal Unit Number CC 20.9 CC 22.8 CC 24.6 CC 26.3 CC 28.8 CC 31.0 CC 33.3 CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 Index and Instructions: pages 16-125—16-129 Motor FLC (A) 1.T.U. 2 T.U. 3 T.U. 0.42–0.46 0.47–0.50 0.51–0.55 0.56–0.62 0.63–0.67 0.68–0.73 0.74–0.81 0.82–0.89 0.90–0.98 0.99–1.12 1.13–1.20 1.21–1.34 1.35–1.41 1.42–1.51 1.52–1.62 1.63–1.73 1.74–1.86 1.87–2.02 2.03–2.25 2.26–2.46 2.47–2.77 2.78–2.99 3.00–3.26 3.27–3.59 3.60–3.99 4.00–4.42 4.43–4.61 4.62–5.23 5.24–5.39 5.40–5.88 5.89–6.56 6.57–7.18 7.19–7.80 7.81–9.00 0.39–0.43 0.44–0.47 0.48–0.52 0.53–0.58 0.59–0.64 0.65–0.68 0.69–0.77 0.78–0.84 0.85–0.93 0.94–1.05 1.06–1.13 1.14–1.25 1.26–1.33 1.34–1.42 1.43–1.52 1.53–1.63 1.64–1.75 1.76–1.90 1.91–2.13 2.14–2.33 2.34–2.73 2.74–2.86 2.87–3.14 3.15–3.47 3.48–3.83 3.84–4.16 4.17–4.43 4.44–5.00 5.01–5.16 5.17–5.56 5.57–6.22 6.23–6.89 6.90–7.00 — 0.38–0.40 0.41–0.44 0.45–0.49 0.50–0.55 0.56–0.60 0.61–0.65 0.66–0.72 0.73–0.79 0.80–0.88 0.89–0.98 0.99–1.07 1.08–1.17 1.18–1.25 1.26–1.33 1.34–1.44 1.45–1.53 1.54–1.65 1.66–1.79 1.80–1.99 2.00–2.18 2.19–2.45 2.46–2.65 2.66–2.90 2.91–3.19 3.20–3.56 3.57–3.83 3.84–4.08 4.09–4.64 4.65–5.00 5.01–5.36 5.37–5.87 5.88–6.43 6.44–6.79 6.80–7.00 Thermal Unit Number A .49 A .54 A .59 A .65 A .71 A .78 A .86 A .95 A 1.02 A 1.16 A 1.25 A 1.39 A 1.54 A 1.63 A 1.75 A 1.86 A 1.99 A 2.15 A 2.31 A 2.57 A 2.81 A 3.61 A 3.95 A 4.32 A 4.79 A 5.30 A 5.78 A 6.20 A 6.99 A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 Table 18 Motor FLC (A) 1.T.U. 2 T.U. 3 T.U. 15.5–16.4 16.5–17.6 17.7–19.1 19.2–20.4 20.5–22.1 22.2–23.4 23.5–25.6 25.7–27.3 27.4–29.4 29.5–31.5 31.6–33.7 33.8–36.5 36.6–39.1 39.2–41.7 41.8–44.8 44.9–48.0 48.1–50.7 50.8–54.9 55.0–59.9 60.0–63.3 63.4–67.2 67.3–72.4 72.5–74.9 75.0–77.4 77.5–80.7 80.8–83.1 83.2–86.0 — — 14.4–15.3 15.4–16.4 16.5–18.4 18.5–19.6 19.7–21.0 21.1–22.7 22.8–24.2 24.3–25.9 26.0–27.8 27.9–29.8 29.9–31.7 31.8–34.2 34.3–36.9 37.0–39.8 39.9–42.3 42.4–45.3 45.4–47.9 48.0–51.9 52.0–56.5 56.6–60.7 60.8–64.8 64.9–67.1 67.2–70.1 70.2–72.9 73.0–74.9 75.0–77.9 78.0–80.9 81.0–82.9 83.0–86.0 13.6–14.5 14.6–15.5 15.6–17.4 17.5–18.5 18.6–19.9 20.0–21.5 21.6–22.9 23.0–24.5 24.6–26.3 26.4–28.2 28.3–30.0 30.1–32.3 32.4–34.9 35.0–37.6 37.7–40.0 40.1–42.8 42.9–45.3 45.4–49.1 49.2–53.4 53.5–57.4 57.5–61.3 61.4–63.5 63.6–66.3 66.4–69.0 69.1–70.9 71.0–73.7 73.8–76.5 76.6–78.4 78.5–86.0 Thermal Unit Number CC 20.9 CC 22.8 CC 24.6 CC 26.3 CC 28.8 CC 31.0 CC 33.3 CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 19–27 www.schneider-electric.us Motor FLC (A) 43.6–47.3 47.4–51.3 51.4–54.6 54.7–59.7 59.8–65.1 65.2–70.1 70.2–75.1 75.2–82.2 82.3–89.2 89.3–96.5 96.6–104. 105.–113. 114.–123. 124.–133. Table 23 Thermal Unit Number CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 Table 20 Motor FLC (A) 133.–148. 149.–174. 175.–195. 196.–219. 220.–239. 240.–271. 272.–308. 309.–348. 349.–397. 398.–429. 430.–495. 496.–520. Thermal Unit Number B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 Table 21 Motor FLC (A) 128.–140. 141.–163. 164.–179. 180.–201. 202.–227. 228.–251. 252.–278. 279.–308. 309.–346. 347.–380. 381.–426. 427.–454. 455.–489. 490.–520. Thermal Unit Load B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 Large Enclosure 0.31–0.32 0.33–0.36 0.37–0.39 0.40–0.43 0.44–0.47 0.48–0.52 0.53–0.58 0.59–0.60 0.61–0.62 0.63–0.69 0.70–0.76 0.77–0.84 0.85–0.93 0.94–1.03 1.04–1.23 1.24–1.35 1.36–1.47 1.48–1.61 1.62–1.76 1.77–1.93 1.94–2.12 2.13–2.35 2.36–2.61 2.62–2.79 2.80–3.14 3.15–3.48 3.49–3.89 3.90–4.30 4.31–4.73 4.74–5.20 5.21–5.95 5.96–6.49 6.50–7.08 7.09–7.77 7.78–8.48 8.49–9.15 9.16–10.3 10.4–11.9 12.0–13.4 13.5–15.4 15.5–17.5 17.6–19.8 19.9–22.5 22.6–26.0 — Small Enclosure 0.29–0.30 0.31–0.33 0.34–0.37 0.38–0.41 0.42–0.45 0.46–0.50 0.51–0.55 0.56–0.57 0.58–0.60 0.61–0.66 0.67–0.73 0.74–0.81 0.82–0.90 0.91–0.99 1.00–1.18 1.19–1.30 1.31–1.42 1.43–1.49 1.50–1.69 1.70–1.85 1.86–2.03 2.04–2.25 2.26–2.50 2.51–2.68 2.69–3.01 3.02–3.35 3.36–3.74 3.75–4.14 4.15–4.57 4.58–5.03 5.04–5.76 5.77–6.29 6.30–6.87 6.88–7.54 7.55–8.25 8.26–8.60 8.61–9.63 9.64–11.1 11.2–12.5 12.6–14.3 14.4–16.1 16.2–18.2 18.3–20.6 20.7–23.4 23.5–26.0 Thermal Unit Number AR .45 AR .49 AR .54 AR .59 AR .65 AR .71 AR .78 AR .86 AR .95 AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 Table 24 Table 22 Thermal Unit Number DD 112.0 DD 121.0 DD 128.0 DD 140.0 DD 150.0 DD 160.0 DD 185.0 DD 213.0 DD 220.0 DD 230.0 DD 250.0 DD 265.0 DD 280.0 Motor FLC (A) 88.2–95.1 95.2–101. 102.–111. 112.–119. 120.–131. 132.–149. 150.–170. 171.–180. 181.–197. 198.–204. 205.–213. 214.–237. 238.–243. 244.–266. Thermal Unit Number DD 112.0 DD 121.0 DD 128.0 DD 140.0 DD 150.0 DD 160.0 DD 185.0 DD 220.0 DD 240.0 DD 250.0 DD 265.0 DD 280.0 DD 300.0 DD 320.0 Motor FLC (A) 0.28–0.30 0.31–0.33 0.34–0.36 0.37–0.39 0.40–0.42 0.43–0.46 0.47–0.50 0.51–0.52 0.53–0.56 0.57–0.60 0.61–0.66 0.67–0.73 0.74–0.81 0.82–0.90 0.91–1.05 1.06–1.15 1.16–1.25 1.26–1.35 1.36–1.47 1.48–1.58 1.59–1.74 1.75–1.94 1.95–2.20 2.21–2.47 2.48–2.76 2.77–3.07 3.08–3.45 3.46–3.81 3.82–4.20 4.21–4.65 4.66–5.29 5.30–5.84 5.85–6.27 6.28–7.00 Thermal Unit Number AR .45 AR .49 AR .54 AR .59 AR .65 AR .71 AR .78 AR .86 AR .95 AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 Table 26 Size 7 Type J Size 8 Type K 2000/5 Thermal Unit Number 277.–312. 313.–352. 353.–388. 389.–445. 446.–503. 504.–561. 562.–640. 641.–708. 709.–777. 778.–870. 871.–978. 979.–1093. 1094.–1215. B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 Current Transformer Ratio 120/5 Motor FLC 166.–187. 188.–211. 212.–232. 233.–267. 268.–301. 302.–336. 337.–383. 384.–425. 426.–466. 467.–522. 523.–587. 588.–656. 657.–764. Table 27 Motor FLC (A) 2 or 3 T.U. Large Enclosure 4.32–4.93 4.94–5.40 5.41–5.95 5.96–6.13 6.14–6.81 6.82–7.84 7.85–8.97 8.98–10.1 10.2–11.6 11.7–13.2 13.3–15.0 15.1–17.1 17.2–19.6 19.7–21.9 22.0–23.8 23.9–25.6 25.7–27.9 28.0–30.5 30.6–33.0 33.1–35.7 35.8–39.5 39.6–41.5 41.6–45.0 — Small Enclosure 4.14–4.71 4.72–5.18 5.19–5.74 5.75–5.98 5.99–6.47 6.48–7.42 7.43–8.46 8.47–9.56 9.57–10.9 11.0–12.3 12.4–14.0 14.1–15.9 16.0–18.1 18.2–20.3 20.4–22.0 22.1–23.6 23.7–25.5 25.6–27.8 27.9–30.0 30.1–32.4 32.5–35.7 35.8–38.3 38.4–40.9 41.0–45.0 Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 AR 94.0 16 Motor FLC (A) 92.0–100. 101.–109. 110.–119. 120.–131. 132.–139. 140.–156. 157.–166. 167.–180. 181.–189. 190.–209. 210.–225. 226.–238. 239.–266. Table 25 Motor FLC (A) 2 or 3 T.U. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 19 © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-133 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 28–42 www.schneider-electric.us Table 28 Table 31 Motor FLC (A) Thermal Unit Number 2 or 3 T.U. Large Small Enclosure Enclosure 45.3–48.2 40.3–42.8 CC 64.3 48.3–52.4 42.9–46.2 CC 68.5 52.5–56.4 46.3–49.8 CC 74.6 56.5–61.2 49.9–54.9 CC 81.5 61.3–66.1 55.0–57.9 CC 87.7 66.2–71.4 58.0–62.5 CC 94.0 71.5–77.0 62.6–67.3 CC 103.0 77.1–80.7 67.4–73.4 CC 112.0 80.8–87.7 73.5–78.9 CC 121.0 87.8–94.9 79.0–84.9 CC 132.0 95.0–102. 85.0–91.0 CC 143.0 103.–110. 91.1–97.2 CC 156.0 111.–117. 97.3–104. CC 167.0 118.–133. 105.–121. CC 180.0 — 122.–133. CC 196.0 Table 29 Motor FLC (A) 50.0–55.9 56.0–60.9 61.0–65.9 66.0–69.9 70.0–75.9 76.0–81.9 82.0–86.9 87.0–92.9 93.0–97.9 98.0–107.9 108.0–113.9 114.0–125.9 Thermal Unit Number E 88 E 89 E 91 E 92 E 93 E 94 E 96 E 97 E 98 E 99 E 101 E 102 Table 30 Motor FLC (A) Large Enclosure 39.0–42.9 43.0–48.0 48.1–54.7 54.8–62.2 62.3–71.3 71.4–76.0 76.1–85.5 85.6–92.4 92.5–103. 104.–111. 112.–123. 124.–133. 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-134 Small Enclosure 37.0–40.8 40.9–45.6 45.7–51.8 51.9–58.8 58.9–67.4 67.5–70.4 70.5–79.4 79.5–86.3 86.4–96.7 96.8–105. 106.–117. 118.–133. Thermal Unit Number AU 44.0 AU 50.0 AU 56.0 AU 64.0 AU 72.0 AU 81.0 AU 88.0 AU 99.0 AU 110.0 AU 123.0 AU 135.0 AU 152.0 Motor FLC (A) 0.31–0.35 0.36–0.39 0.40–0.44 0.45–0.50 0.51–0.61 0.62–0.68 0.69–0.73 0.74–0.82 0.83–0.92 0.93–1.03 1.04–1.19 1.20–1.34 1.35–1.50 1.51–1.74 1.75–1.97 1.98–2.14 2.15–2.47 2.48–2.91 2.92–3.31 3.32–3.75 3.76–4.05 4.06–4.94 4.95–5.52 5.53–6.11 6.12–6.52 6.53–7.31 7.32–8.43 8.44–9.83 9.84–10.7 10.8–11.6 11.7–12.9 13.0–14.3 14.4–15.7 15.8–17.8 17.9–20.3 20.4–23.3 23.4–26.6 26.7–30.3 30.4–35.3 35.4–41.5 41.6–45 Table 33 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 Table 32 Motor FLC (A) 0.33–0.35 0.36–0.39 0.40–0.42 0.43–0.46 0.47–0.51 0.52–0.56 0.57–0.62 0.63–0.68 0.69–0.75 0.76–0.83 0.84–0.91 0.92–1.00 1.01–1.10 1.11–1.21 1.22–1.33 1.34–1.47 1.48–1.62 1.63–1.77 1.78–1.96 1.97–2.16 2.17–2.37 2.38–2.62 2.63–2.88 2.89–3.17 3.18–3.48 3.49–3.83 3.84–4.20 4.21–4.62 4.63–5.08 5.09–5.57 5.58–6.13 6.14–6.83 6.84–7.41 7.42–8.05 8.06–8.98 8.99–9.93 9.94–10.9 11.0–12.4 12.5–14.3 14.4–15.8 15.9–17.9 18.0–20.0 20.1–22.4 22.5–25.0 Thermal Unit Number AR .45 AR .49 AR .54 AR .59 AR .65 AR .71 AR .78 AR .86 AR .95 AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 Table 36 Thermal Motor FLC (A) Unit Number 0.28–0.30 AR .45 0.31–0.33 AR .49 0.34–0.36 AR .54 0.37–0.39 AR .59 0.40–0.42 AR .65 0.43–0.46 AR .71 0.47–0.50 AR .78 0.51–0.52 AR .86 0.53–0.56 AR .95 0.57–0.60 AR 1.05 0.61–0.66 AR 1.15 0.67–0.73 AR 1.26 0.74–0.81 AR 1.39 0.82–0.90 AR 1.53 0.91–1.05 AR 1.68 1.06–1.15 AR 1.85 1.16–1.25 AR 2.04 1.26–1.35 AR 2.24 1.36–1.47 AR 2.46 1.48–1.58 AR 2.71 1.59–1.74 AR 2.98 1.75–1.94 AR 3.28 1.95–2.20 AR 3.62 2.21–2.47 AR 3.98 2.48–2.76 AR 4.37 2.77–3.07 AR 4.80 3.08–3.45 AR 5.3 3.46–3.81 AR 5.8 3.82–4.20 AR 6.4 4.21–4.65 AR 7.0 4.66–5.29 AR 7.7 5.30–5.84 AR 8.5 5.85–6.27 AR 9.3 6.28–6.97 AR 10.2 6.98–7.59 AR 11.2 7.60–7.89 AR 12.4 7.90–8.95 AR 13.6 8.96–10.3 AR 15.4 10.4–11.7 AR 17.6 11.8–12.0 AR 20.5 Following Selections for Size 1 Only 11.8–13.3 AR 20.5 13.4–15.2 AR 23.0 15.3–17.2 AR 27.0 17.3–19.7 AR 30.0 19.8–22.4 AR 35.0 22.5–26.0 AR 40.0 Motor FLC (A) 90.6–97.4 97.5–111. 112.–129. 130.–149. 150.–163. 164.–189. 190.–213. 214.–240. 241.–266. Table 37 Motor FLC (A) 27.1–30.0 30.1–33.2 33.3–35.7 35.8–39.4 39.5–43.4 43.5–46.9 47.0–51.5 51.6–57.0 57.1–62.8 62.9–69.1 69.2–75.0 75.1–83.3 Motor FLC (A) 15.1–16.2 16.3–17.5 17.6–19.1 19.2–20.7 20.8–22.2 22.3–24.0 24.1–25.7 25.8–27.8 27.9–30.1 30.2–32.5 32.6–35.1 35.2–38.0 38.1–41.1 41.2–44.0 44.1–47.2 47.3–51.1 51.2–55.8 55.9–59.5 59.6–64.5 64.6–69.5 69.6–75.0 75.1–78.1 78.2–82.3 82.4–86.0 Thermal Unit Number CC 20.9 CC 22.8 CC 24.6 CC 26.3 CC 28.8 CC 31.0 CC 33.3 CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 Motor FLC (A) 85.0–95.9 96.0–108. 109.–127. 128.–136. 137.–147. 148.–162. 163.–185. 186.–202. 203.–219. 220.–233. 234.–266. Motor FLC (A) 3 T.U. 36.3–39.9 40.0–44.1 44.2–50.0 50.1–56.4 56.5–64.4 64.5–68.4 68.5–77.7 77.8–84.2 84.3–94.8 94.9–101. 102.–115. 116.–122. 123.–133. — 34.7–37.1 37.2–41.5 41.6–47.1 47.2–53.4 53.5–60.7 60.8–64.9 65.0–73.4 73.5–79.5 79.6–89.0 89.1–96.9 97.0–108. 109.–115. 116.–120. 121.–133. Thermal Unit Number AF 123.0 AF 135.0 AF 150.0 AF 159.0 AF 168.0 AF 188.0 AF 205.0 AF 220.0 AF 240.0 AF 260.0 AF 308.0 Table 39 148.–173. 174.–189. 190.–205. 206.–222. 223.–243. 244.–261. 262.–289. 290.–324. 325.–367. 368.–389. 390.–404. 405.–451. 452.–495. 496.–520. Thermal Unit Number AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 Table 40 Motor FLC (A) Table 35 2 T.U. Thermal Unit Number E 67 E 69 E 70 E 71 E 72 E 73 E 74 E 76 E 77 E 78 E 79 E 80 Table 38 Motor FLC (A) Table 34 Table 41 Thermal Unit Number AF 110.0 AF 123.0 AF 135.0 AF 150.0 AF 159.0 AF 168.0 AF 188.0 AF 205.0 AF 220.0 Thermal Unit Number AU 44.0 AU 50.0 AU 56.0 AU 64.0 AU 72.0 AU 81.0 AU 88.0 AU 99.0 AU 110.0 AU 123.0 AU 135.0 AU 152.0 AU 169.0 AU 183.0 Index and Instructions: pages 16-125—16-129 15.3–16.7 16.8–19.8 19.9–22.8 22.9–25.8 25.9–30.4 30.5–31.9 32.0–34.2 34.3–38.8 38.9–44.2 44.3–50.2 50.3–57.1 57.2–63.2 63.3–68.6 68.7–78.6 78.7–86.0 Thermal Unit Number C 20.0 C 22.0 C 26.0 C 30.0 C 34.0 C 40.0 C 42.0 C 45.0 C 51.0 C 58.0 C 66.0 C 75.0 C 83.0 C 90.0 C 103.0 Motor FLC (A) 0.81–0.92 0.93–1.07 1.08–1.14 1.15–1.26 1.27–1.49 1.50–1.73 1.74–1.89 1.90–2.16 2.17–2.37 2.38–2.66 2.67–2.99 3.00–3.40 3.41–3.94 3.95–4.15 4.16–4.49 4.50–5.15 5.16–5.77 5.78–6.61 6.62–7.14 7.15–7.97 7.98–8.15 8.16–9.32 9.33–9.97 9.98–10.7 10.8–12.0 12.1–13.9 14.0–15.7 15.8–18.4 18.5–21.6 21.7–24.0 24.1–28.6 28.7–30.7 30.8–33.5 33.6–36.0 Thermal Unit Number B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 Table 42 Motor FLC (A) 0.28–0.30 0.31–0.33 0.34–0.36 0.37–0.39 0.40–0.42 0.43–0.46 0.47–0.50 0.51–0.52 0.53–0.56 0.57–0.60 0.61–0.66 0.67–0.73 0.74–0.81 0.82–0.90 0.91–1.05 1.06–1.15 1.16–1.25 1.26–1.35 1.36–1.47 1.48–1.58 1.59–1.74 1.75–1.94 1.95–2.20 2.21–2.47 2.48–2.76 2.77–3.07 3.08–3.45 3.46–3.81 3.82–4.20 4.21–4.65 4.66–5.29 5.30–5.84 5.85–6.27 6.28–6.97 6.98–7.59 7.60–7.89 7.90–8.95 8.96–10.3 10.4–11.7 11.8–13.3 13.4–15.2 15.3–17.2 17.3–19.7 19.8–22.4 22.5–26.0 Thermal Unit Number AR .45 AR .49 AR .54 AR .59 AR .65 AR .71 AR .78 AR .86 AR .95 AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 43–58 www.schneider-electric.us Motor FLC (A) 0.41–0.44 0.45–0.49 0.50–0.53 0.54–0.58 0.59–0.65 0.66–0.71 0.72–0.78 0.79–0.85 0.86–0.96 0.97–1.04 1.05–1.16 1.17–1.29 1.30–1.37 1.38–1.47 1.48–1.56 1.57–1.65 1.66–1.79 1.80–1.95 1.96–2.15 2.16–2.38 2.39–2.75 2.76–2.84 2.85–3.06 3.07–3.45 3.46–3.70 3.71–4.07 4.08–4.32 4.33–4.90 4.91–5.35 5.36–5.85 5.86–6.41 6.42–6.79 6.80–7.57 7.58–8.15 8.16–8.98 8.99–9.67 9.68–9.95 9.96–10.8 10.9–12.1 12.2–13.1 13.2–13.9 14.0–15.0 15.1–16.0 Table 45 Thermal Unit Number A .49 A .54 A .59 A .65 A .71 A .78 A .86 A .95 A 1.02 A 1.16 A 1.25 A 1.39 A 1.54 A 1.63 A 1.75 A 1.86 A 1.99 A 2.15 A 2.31 A 2.57 A 2.81 A 3.61 A 3.95 A 4.32 A 4.79 A 5.30 A 5.78 A 6.20 A 6.99 A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 A 11.9 A 13.2 A 14.1 A 14.8 A 16.2 A 17.9 A 19.8 A 21.3 A 25.2 Table 49 Size 7 Size 8 Type J Type K Current Transformer Ratio 1200/5 Motor FLC (A) Non-Compensated 136.–150. 227.–251. AR 1.05 151.–165. 252.–276. AR 1.15 166.–183. 277.–305. AR 1.26 184.–202. 306.–337. AR 1.39 203.–224. 338.–373. AR 1.53 225.–267. 374.–445. AR 1.68 268.–293. 446.–489. AR 1.85 294.–319. 490.–532. AR 2.04 320.–349. 533.–582. AR 2.24 350.–381. 583.–636. AR 2.46 382.–418. 637.–697. AR 2.71 419.–459. 698.–766. AR 2.98 460.–509. 767.–849. AR 3.28 510.–565. 850.–942. AR 3.62 566.–604. 943.–1007. AR 3.98 605.–697. 1008.–1133. AR 4.37 698.–753. — AR 4.80 Compensated 161.–177. 268.–295. AR 1.26 178.–196. 296.–327. AR 1.39 197.–217. 328.–363. AR 1.53 218.–253. 364.–423. AR 1.68 254.–277. 424.–463. AR 1.85 278.–301. 464.–503. AR 2.04 302.–325. 504.–543. AR 2.24 326.–354. 544.–592. AR 2.46 355.–381. 592.–635. AR 2.71 382.–419. 636.–699. AR 2.98 420.–467. 700.–779. AR 3.28 468.–529. 780.–883. AR 3.62 530.–594. 884.–991. AR 3.98 595.–664. 992.–1107. AR 4.37 665.–738. 1108.–1231. AR 4.80 739.–829. — AR 5.3 Table 46 Motor FLC (A) 105.–116. 117.–132. 133.–148. 149.–165. 166.–184. 185.–207. 208.–229. 230.–266. Thermal Unit Number AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 Table 47 Motor FLC (A) 146.–169. 170.–185. 186.–201. 202.–217. 218.–236. 237.–253. 254.–279. 280.–311. 312.–353. 354.–396. 397.–442. 443.–492. 493.–520. Thermal Unit Number AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 Table 48 Motor FLC (A) 158.–187. 188.–206. 207.–224. 225.–244. 245.–267. 268.–289. 290.–324. 325.–361. 362.–406. 407.–445. 446.–463. 464.–520. Thermal Unit Number AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 82.5–88.2 88.3–95.9 96.0–102. 103.–109. 110.–121. 122.–139. 140.–154. 155.–163. 164.–175. 176.–184. 185.–195. 196.–215. 216.–224. 225.–243. 244.–266. Table 50 Motor FLC (A) 14.4–16.1 16.2–18.6 18.7–20.5 20.6–23.4 23.5–26.9 27.0–28.3 28.4–30.8 30.9–35.0 35.1–38.8 38.9–44.3 44.4–49.3 49.4–55.5 55.6–61.0 61.1–68.6 68.7–76.3 76.4–86.0 Thermal Unit Number AU 20.0 AU 23.0 AU 26.0 AU 29.0 AU 33.0 AU 38.0 AU 40.0 AU 44.0 AU 50.0 AU 56.0 AU 64.0 AU 72.0 AU 81.0 AU 88.0 AU 99.0 AU 110.0 Table 51 Motor FLC (A) 15.7–17.7 17.8–19.9 20.0–22.7 22.8–25.7 25.8–29.1 29.2–30.8 30.9–34.3 34.4–38.3 38.4–42.3 42.4–47.5 47.6–53.0 53.1–60.5 60.6–64.9 65.0–71.5 71.6–77.3 77.4–86.0 Thermal Unit Number AU 20.0 AU 23.0 AU 26.0 AU 29.0 AU 33.0 AU 38.0 AU 40.0 AU 44.0 AU 50.0 AU 56.0 AU 64.0 AU 72.0 AU 81.0 AU 88.0 AU 99.0 AU 110.0 Table 52 Motor FLC (A) 92.0–103. 104.–116. 117.–139. 140.–150. 151.–167. 168.–177. 178.–205. 206.–222. 223.–232. 233.–247. 248.–266. Thermal Unit Number AF 123.0 AF 135.0 AF 150.0 AF 159.0 AF 168.0 AF 188.0 AF 205.0 AF 220.0 AF 240.0 AF 260.0 AF 308.0 Table 56 Motor FLC (A) 1 T. U. 3 T. U. 0.31–0.33 0.34–0.36 0.37–0.40 0.41–0.48 0.49–0.57 0.58–0.64 0.65–0.70 0.71–0.77 0.78–0.85 0.86–0.99 1.00–1.10 1.11–1.28 1.29–1.41 1.42–1.58 1.59–1.80 1.81–2.03 2.04–2.25 2.26–2.51 2.52–2.83 2.84–3.29 3.30–3.75 3.76–4.22 4.23–4.65 4.66–5.16 5.17–5.53 5.54–6.09 6.10–6.80 6.81–7.60 7.61–8.35 8.36–9.00 0.29–0.31 0.32–0.36 0.37–0.38 0.39–0.46 0.47–0.55 0.56–0.61 0.62–0.66 0.67–0.75 0.76–0.83 0.84–0.93 0.94–1.06 1.07–1.18 1.19–1.31 1.32–1.47 1.48–1.67 1.68–1.83 1.84–2.04 2.05–2.38 2.39–2.60 2.61–3.13 3.14–3.59 3.60–3.94 3.95–4.19 4.20–4.72 4.73–5.21 5.22–5.51 5.52–6.17 6.18–7.00 — — Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 Motor FLC (A) 1 or 2 T. U. 3 T. U. 3.29–3.74 3.75–4.23 4.24–4.68 4.69–5.22 5.23–5.67 5.68–6.13 6.14–6.91 6.92–7.70 7.71–8.56 8.57–9.39 9.40–10.4 10.5–11.6 11.7–12.9 13.0–14.6 14.7–16.5 16.6–18.5 18.6–21.0 21.1–23.6 23.7–26.3 26.4–29.3 29.4–35.1 35.2–36.1 36.2–39.1 39.2–41.5 41.6–45.0 — — 3.18–3.40 3.41–3.76 3.77–4.00 4.01–4.57 4.58–5.03 5.04–5.32 5.33–5.97 5.98–6.88 6.89–7.82 7.83–8.47 8.48–9.15 9.16–10.1 10.2–11.2 11.3–12.0 12.1–13.6 13.7–15.2 15.3–17.1 17.2–19.0 19.1–21.5 21.6–24.1 24.2–27.0 27.1–28.7 28.8–30.4 30.5–32.2 32.3–35.4 35.5–38.2 38.3–45.0 Table 57 Motor FLC (A)) Table 54 Motor FLC (A) 2 T. U. 3 T. U. 43.6–45.5 45.6–49.6 49.7–53.1 53.2–57.6 57.7–62.4 62.5–67.5 67.6–71.1 71.2–75.9 76.0–81.9 82.0–84.6 84.7–90.7 90.8–98.4 98.5–105. 106.–117. 118.–123. 124.–133. — 41.1–43.5 43.6–46.8 46.9–50.0 50.1–54.9 55.0–57.5 57.6–61.8 61.9–66.2 66.3–72.4 72.5–78.1 78.2–80.7 80.8–86.5 86.6–93.9 94.0–100. 101.–112. 113.–117. 118.–123. 124.–133. Thermal Unit Number CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 CC 208.0 CC 219.0 Table 55 Motor FLC (A) 2 T. U. 3 T. U. 0.38–0.40 0.41–0.43 0.44–0.48 0.49–0.52 0.53–0.56 0.57–0.61 0.62–0.67 0.68–0.73 0.74–0.81 0.82–0.89 0.90–0.97 0.98–1.07 1.08–1.17 1.18–1.31 1.32–1.49 1.50–1.69 1.70–1.83 1.84–2.00 2.01–2.17 2.18–2.35 2.36–2.60 2.61–2.87 2.88–3.14 3.15–3.47 3.48–3.90 3.91–4.36 4.37–4.88 4.89–5.37 5.38–5.97 5.98–6.55 6.56–7.50 7.51–8.23 8.24–9.00 0.31–0.33 0.34–0.36 0.37–0.39 0.40–0.43 0.44–0.47 0.48–0.51 0.52–0.56 0.57–0.58 0.59–0.64 0.65–0.70 0.71–0.77 0.78–0.85 0.86–0.94 0.95–1.03 1.04–1.22 1.23–1.34 1.35–1.46 1.47–1.58 1.59–1.76 1.77–1.85 1.86–2.08 2.09–2.27 2.28–2.51 2.52–2.90 2.91–3.23 3.24–3.58 3.59–4.02 4.03–4.43 4.44–4.86 4.87–5.37 5.38–6.12 6.13–6.65 6.66–7.00 Thermal Unit Number AR .45 AR .49 AR .54 AR .59 AR .65 AR .71 AR .78 AR .86 AR .95 AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 Thermal Unit Number B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 B 88.0 2 T. U. 3 T. U. 5.09–5.59 5.60–6.11 6.12–6.72 6.73–7.37 7.38–7.67 7.68–8.68 8.69–9.94 9.95–11.1 11.2–12.9 13.0–14.7 14.8–16.9 17.0–19.2 19.3–21.9 22.0–24.4 24.5–26.3 26.4–28.0 28.1–30.3 30.4–32.2 32.3–34.4 34.5–36.6 36.7–39.5 39.6–45.0 — 5.15–5.97 5.98–6.50 6.51–7.04 7.05–7.59 7.60–7.93 7.94–9.04 9.05–10.2 10.3–11.5 11.6–13.2 13.3–14.9 15.0–16.9 17.0–19.3 19.4–21.7 21.8–25.0 25.1–27.0 27.1–29.1 29.2–30.8 30.9–32.9 33.0–35.0 35.1–37.1 37.2–39.1 39.2–41.5 41.6–45.0 Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 Table 58 Motor FLC (A) 1 or 2 T. U. 3 T. U. 3.37–3.82 3.83–4.33 4.34–4.79 4.80–5.33 5.34–5.79 5.80–6.27 6.28–7.03 7.04–7.88 7.89–8.73 8.74–9.55 9.56–10.6 10.7–11.8 11.9–13.1 13.2–14.9 15.0–16.9 17.0–18.8 18.9–21.5 21.6–24.1 24.2–26.8 26.9–29.9 30.0–35.5 35.6–36.5 36.6–39.6 39.7–41.5 41.6–45.0 — 3.28–3.51 3.52–3.89 3.90–4.14 4.15–4.73 4.74–5.22 5.23–5.53 5.54–6.21 6.22–7.17 7.18–8.19 8.20–8.90 8.91–9.57 9.58–10.6 10.7–11.8 11.9–12.7 12.8–14.4 14.5–16.1 16.2–18.2 18.3–20.2 20.3–22.8 22.9–25.6 25.7–28.8 28.9–30.6 30.7–32.4 32.5–34.6 34.7–38.6 38.7–45.0 Thermal Unit Number B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 16 0.34–0.38 0.39–0.43 0.44–0.48 0.49–0.53 0.54–0.62 0.63–0.69 0.70–0.78 0.79–0.88 0.89–0.99 1.00–1.10 1.11–1.26 1.27–1.43 1.44–1.59 1.60–1.81 1.82–2.00 2.01–2.28 2.29–2.52 2.53–2.87 2.88–3.28 3.29–3.75 3.76–4.27 4.28–4.77 4.78–5.27 5.28–5.91 5.92–6.25 6.26–6.83 6.84–7.65 7.66–8.55 8.56–9.56 9.57–10.3 10.4–11.3 11.4–12.4 12.5–14.1 14.2–15.7 15.8–17.9 18.0–20.1 20.2–22.5 22.6–25.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.65 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 Thermal Unit Number 2000/5 Table 44 Motor FLC (A) Motor FLC (A) Table 53 Thermal Unit Number DD 112.0 DD 121.0 DD 128.0 DD 140.0 DD 150.0 DD 160.0 DD 185.0 DD 220.0 DD 240.0 DD 250.0 DD 265.0 DD 280.0 DD 300.0 DD 320.0 DD 340.0 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 43 © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-135 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 59–66 www.schneider-electric.us Table 59 Table 62 Motor FLC (A) 1 or 2 T. U. 0.34–0.38 0.39–0.43 0.44–0.47 0.48–0.53 0.54–0.60 0.61–0.68 0.69–0.76 0.77–0.86 0.87–0.97 0.98–1.07 1.08–1.23 1.24–1.39 1.40–1.55 1.56–1.77 1.78–1.96 1.97–2.15 2.16–2.41 2.42–2.71 2.72–3.03 3.04–3.53 3.54–4.01 4.02–4.56 4.57–5.03 5.04–5.59 5.60–5.95 5.96–6.58 6.59–7.31 7.32–8.15 8.16–9.13 9.14–9.91 9.92–10.7 10.8–12.1 12.2–13.5 13.6–15.1 15.2–17.0 17.1–18.9 19.0–21.5 21.6–24.0 24.1–26.0 — 3 T. U. 0.29–0.31 0.32–0.35 0.36–0.38 0.39–0.46 0.47–0.55 0.56–0.62 0.63–0.67 0.68–0.75 0.76–0.84 0.85–0.95 0.96–1.09 1.10–1.21 1.22–1.35 1.36–1.53 1.54–1.73 1.74–1.90 1.91–2.14 2.15–2.34 2.35–2.67 2.68–3.22 3.23–3.48 3.49–3.87 3.88–4.14 4.15–4.73 4.74–5.28 5.29–5.64 5.65–6.39 6.40–7.43 7.44–8.55 8.56–9.40 9.41–10.0 10.1–11.2 11.3–12.5 12.6–13.5 13.6–15.4 15.5–17.5 17.6–19.9 20.0–22.2 22.3–25.5 25.6–26.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 Table 60 Motor FLC (A) 6.84–7.49 7.50–8.05 8.06–9.10 9.11–9.99 10.0–11.1 11.2–12.7 12.8–14.8 14.9–16.6 16.7–19.3 19.4–21.4 21.5–25.1 25.2–28.3 28.4–31.2 31.3–33.3 33.4–35.7 35.8–38.5 38.6–41.5 41.6–45.0 Thermal Unit Number AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 Table 64 Motor FLC (A) 2 T. U. 4.83–5.33 5.34–5.84 5.85–6.43 6.44–7.03 7.04–7.30 7.31–8.29 8.30–9.49 9.50–10.7 10.8–12.3 12.4–14.0 14.1–16.0 16.1–18.4 18.5–21.0 21.1–23.0 23.1–25.5 25.6–26.7 26.8–28.3 28.4–30.3 30.4–32.5 32.6–34.5 34.6–37.6 37.7–39.7 39.8–41.4 41.5–45.0 3 T. U. 4.90–5.68 5.69–6.19 6.20–6.71 6.72–7.14 7.15–7.49 7.50–8.48 8.49–9.66 9.67–10.8 10.9–12.4 12.5–13.9 14.0–15.7 15.8–18.1 18.2–20.3 20.4–23.0 23.1–25.2 25.3–26.6 26.7–28.2 28.3–30.2 30.3–32.3 32.4–34.3 34.4–36.7 36.8–39.3 39.4–45.0 — Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 AR 94.0 Table 63 Motor FLC (A) Thermal Unit Number 1 or 2 T. U. 15.1–17.0 17.1–19.1 19.2–21.8 21.9–24.5 24.6–27.9 28.0–29.5 29.6–32.9 33.0–36.6 36.7–40.3 40.4–45.1 45.2–50.4 50.5–57.3 57.4–62.4 62.5–68.3 68.4–73.9 74.0–80.6 80.7–86.0 3 T. U. AU 20.0 AU 23.0 AU 26.0 AU 29.0 AU 33.0 AU 38.0 AU 40.0 AU 44.0 AU 50.0 AU 56.0 AU 64.0 AU 72.0 AU 81.0 AU 88.0 AU 99.0 AU 110.0 AU 123.0 Motor FLC (A) 2 T. U. 2 T. U. 3 T. U. 1Ø 2Ø 0.38–0.40 0.38–0.40 0.31–0.33 AR .45 0.41–0.43 0.41–0.43 0.34–0.36 AR .49 0.44–0.48 0.44–0.48 0.37–0.39 AR .54 0.49–0.52 0.49–0.52 0.40–0.43 AR .59 0.53–0.56 0.53–0.56 0.44–0.47 AR .65 0.57–0.61 0.57–0.61 0.48–0.51 AR .71 0.62–0.67 0.62–0.67 0.52–0.56 AR .78 0.68–0.73 0.68–0.73 0.57–0.58 AR .86 0.74–0.81 0.74–0.81 0.59–0.64 AR .95 0.82–0.89 0.82–0.89 0.65–0.70 AR 1.05 0.90–0.97 0.90–0.97 0.71–0.77 AR 1.15 0.98–1.07 0.98–1.07 0.78–0.85 AR 1.26 1.08–1.17 1.08–1.17 0.86–0.94 AR 1.39 1.18–1.31 1.18–1.31 0.95–1.03 AR 1.53 1.32–1.49 1.32–1.49 1.04–1.22 AR 1.68 1.50–1.69 1.50–1.69 1.23–1.34 AR 1.85 1.70–1.83 1.70–1.83 1.35–1.46 AR 2.04 1.84–2.00 1.84–2.00 1.47–1.58 AR 2.24 2.01–2.17 2.01–2.17 1.59–1.76 AR 2.46 2.18–2.35 2.18–2.35 1.77–1.85 AR 2.71 2.36–2.60 2.36–2.60 1.86–2.08 AR 2.98 2.61–2.87 2.61–2.87 2.09–2.27 AR 3.28 2.88–3.14 2.88–3.14 2.28–2.51 AR 3.62 3.15–3.47 3.15–3.47 2.52–2.90 AR 3.98 3.48–3.90 3.48–3.90 2.91–3.23 AR 4.37 3.91–4.36 3.91–4.36 3.24–3.58 AR 4.80 4.37–4.88 4.37–4.88 3.59–4.02 AR 5.3 4.89–5.37 4.89–5.37 4.03–4.43 AR 5.8 5.38–5.97 5.38–5.97 4.44–4.86 AR 6.4 5.98–6.55 5.98–6.55 4.87–5.37 AR 7.0 6.56–7.50 6.56–7.50 5.38–6.12 AR 7.7 7.51–8.23 7.51–8.23 6.13–6.65 AR 8.5 8.24–8.99 8.24–8.99 6.66–7.31 AR 9.3 9.00–9.86 9.00–9.86 7.32–7.96 AR 10.2 9.87–10.7 9.87–10.7 7.97–8.69 AR 11.2 10.8–11.2 10.8–11.2 8.70–8.99 AR 12.4 11.3–12.8 11.3–12.0 9.00–10.1 AR 13.6 12.9–14.8 — 10.2–11.5 AR 15.4 14.9–16.7 — 11.6–12.0 AR 17.6 16.8–18.0 — — AR 20.5 Following Selections for Size 1 Only. — 11.3–12.8 — AR 13.6 — 12.9–14.8 — AR 15.4 — 14.9–16.7 11.6–13.0 AR 17.6 16.8–19.0 16.8–19.0 13.1–14.6 AR 20.5 19.1–22.0 19.1–22.0 14.7–16.5 AR 23.0 22.1–24.9 22.1–24.9 16.6–18.5 AR 27.0 25.0–26.0 25.0–26.0 18.6–21.0 AR 30.0 — — 21.1–23.6 AR 35.0 — — 23.7–26.0 AR 40.0 Table 61 Motor FLC (A) 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 2 T. U. 46.8–50.0 50.1–54.2 54.3–58.3 58.4–63.6 63.7–68.5 68.6–74.0 74.1–79.8 79.9–83.0 83.1–88.9 89.0–95.6 95.7–102. 103.–109. 110.–119. 120.–133. — 16-136 3 T. U. 45.3–48.2 48.3–52.4 52.5–56.4 56.5–61.2 61.3–66.1 66.2–71.4 71.5–77.0 77.1–79.0 79.1–84.7 84.8–91.1 91.2–98.1 98.2–104. 105.–113. 114.–123. 124.–133. Table 65 Thermal Unit No. Thermal Unit Number CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 Index and Instructions: pages 16-125—16-129 Motor FLC (A) Thermal Unit Number 0.31–0.35 B 0.44 0.36–0.39 B 0.51 0.40–0.44 B 0.57 0.45–0.50 B 0.63 0.51–0.58 B 0.71 0.59–0.65 B 0.81 0.66–0.73 B 0.92 0.74–0.82 B 1.03 0.83–0.92 B 1.16 0.93–1.03 B 1.30 1.04–1.19 B 1.45 1.20–1.34 B 1.67 1.35–1.50 B 1.88 1.51–1.67 B 2.10 1.68–1.89 B 2.40 1.90–2.14 B 2.65 2.15–2.36 B 3.00 2.37–2.65 B 3.30 2.66–2.97 B 3.70 2.98–3.47 B 4.15 3.48–3.94 B 4.85 3.95–4.44 B 5.50 4.45–4.94 B 6.25 4.95–5.52 B 6.90 5.53–5.88 B 7.70 5.89–6.52 B 8.20 6.53–7.31 B 9.10 7.32–8.21 B 10.2 8.22–9.18 B 11.5 9.19–9.90 B 12.8 10.0–11.0 B 14.0 11.1–12.4 B 15.5 12.5–13.9 B 17.5 14.0–15.7 B 19.5 15.8–17.8 B 22.0 17.9–20.0 B 25.0 20.1–22.9 B 28.0 23.0–25.0 B 32.0 Following Selections for Size 2 Only. 23.0–25.7 B 32.0 25.8–28.6 B 36.0 28.7–32.2 B 40.0 32.3–35.8 B 45.0 35.9–40.1 B 50.0 40.2–44.4 B 56.0 44.5–50.0 B 62.0 Table 66 Motor FLC (A) 0.31–0.32 0.33–0.36 0.37–0.41 0.42–0.49 0.50–0.54 0.55–0.61 0.62–0.67 0.68–0.76 0.77–0.87 0.88–0.98 0.99–1.05 1.06–1.25 1.26–1.33 1.34–1.56 1.57–1.71 1.72–1.97 1.98–2.15 2.16–2.42 2.43–2.78 2.79–3.28 3.29–3.88 3.89–4.13 4.14–4.43 4.44–4.96 4.97–5.35 5.36–5.91 5.92–6.79 6.80–7.56 7.57–7.83 7.84–8.09 8.10–9.51 9.52–10.1 10.2–11.3 11.4–13.1 13.2–14.9 15.0–16.1 16.2–17.8 17.9–19.1 19.2–22.4 22.5–23.5 23.6–26.0 Thermal Unit Number B 0.44 B 0.51 B 0.57 B 0.63 B 0.71 B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.5 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 67–73 www.schneider-electric.us Table 67 Motor FLC (A) 3.79–4.14 4.15–4.44 4.45–5.22 5.23–5.29 5.30–5.99 6.00–6.82 6.83–7.68 7.69–7.92 7.93–8.47 8.48–9.99 10.0–10.8 10.9–12.3 12.4–12.9 13.0–15.1 15.2–16.7 16.8–17.9 18.0–20.1 20.2–23.8 23.9–25.8 25.9–28.3 28.4–29.6 29.7–32.1 32.2–34.4 34.5–38.3 38.4–39.9 40.0–45.0 Table 68 Motor FLC (A) 14.9–16.1 16.2–17.3 17.4–19.5 19.6–20.7 20.8–22.4 22.5–23.9 24.0–25.8 25.9–27.6 27.7–29.7 29.8–31.8 31.9–34.2 34.3–37.0 37.1–39.6 39.7–42.5 42.6–45.0 45.1–48.6 48.7–51.2 51.3–56.0 56.1–60.1 60.2–64.3 64.4–68.9 69.0–71.9 72.0–75.4 75.5–78.9 79.0–82.1 82.2–86.0 Table 72 Table 70 Thermal Unit Number B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 B 88.0 Thermal Unit Number CC 20.9 CC 22.8 CC 24.6 CC 26.3 CC 28.8 CC 31.0 CC 33.3 CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 Motor FLC (A) 4.24–4.62 4.63–5.05 5.06–5.54 5.55–6.13 6.14–6.44 6.45–7.48 7.49–8.55 8.56–9.74 9.75–11.1 11.2–12.7 12.8–14.4 14.5–16.4 16.5–18.9 19.0–21.6 21.7–23.3 23.4–24.9 25.0–26.9 27.0–29.1 29.2–31.3 31.4–33.5 33.6–36.9 37.0–39.1 39.2–40.9 41.0–45.0 Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 AR 94.0 Table 71 Motor FLC (A) 3.98–4.53 4.54–5.03 5.04–5.46 5.47–6.01 6.02–6.31 6.32–7.19 7.20–8.29 8.30–9.49 9.50–11.0 11.1–12.6 12.7–14.3 14.4–16.5 16.6–19.2 19.3–21.9 22.0–23.8 23.9–25.5 25.6–27.7 27.8–30.1 30.2–32.5 32.6–34.8 34.9–38.5 38.6–41.5 41.6–45.0 Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 Motor FLC (A) Table 73 Thermal Unit Number 1 T. U. 3 T. U. 2.38–2.62 2.38–2.62 FB 3.33 2.63–2.94 2.63–2.94 FB 3.71 2.95–3.31 2.95–3.31 FB 4.1 3.32–3.43 3.32–3.43 FB 4.5 3.44–3.81 3.44–3.81 FB 4.75 3.82–4.32 3.82–4.32 FB 5.3 4.33–4.75 4.33–4.75 FB 6.1 4.76–5.38 4.76–5.38 FB 6.75 5.39–5.75 5.39–5.75 FB 7.45 5.76–5.97 5.76–5.97 FB 7.8 5.98–6.30 5.98–6.30 FB 8.21 6.31–6.55 6.31–6.55 FB 8.6 6.56–6.89 6.56–6.89 FB 9.0 6.90–7.14 6.90–7.14 FB 9.5 7.15–7.36 7.15–7.36 FB 10.0 7.37–8.30 7.37–8.30 FB 10.6 8.31–8.59 8.31–8.59 FB 11.2 8.60–9.01 8.60–9.01 FB 12.1 9.02–9.68 9.02–9.68 FB 13.1 9.69–9.99 9.69–9.99 FB 13.9 10.0–10.9 10.0–10.9 FB 14.8 11.0–11.3 11.0–11.3 FB 15.6 11.4–12.4 11.4–12.0 FB 16.4 12.5–12.9 — FB 17.6 13.0–14.0 — FB 18.4 14.1–14.5 — FB 19.4 14.6–15.7 — FB 21.1 15.8–16.6 — FB 22.6 16.7–18.0 — FB 23.6 Following Selections for Size M–1 & M–1P Only. — 11.4–12.4 FB 16.4 — 12.5–12.9 FB 17.6 — 13.0–14.0 FB 18.4 — 14.1–14.5 FB 19.4 — 14.6–15.7 FB 21.1 — 15.8–16.6 FB 22.6 16.7–17.6 16.7–17.6 FB 23.6 17.7–18.3 17.7–18.3 FB 24.8 18.4–19.4 18.4–19.4 FB 26.7 19.5–20.5 19.5–20.5 FB 28.3 20.6–21.7 20.6–21.7 FB 29.6 21.8–22.8 21.8–22.8 FB 30.5 22.9–24.3 22.9–24.3 FB 32.5 24.4–24.7 24.4–24.7 FB 34.1 24.8–25.4 24.8–25.4 FB 35.0 25.5–26.0 25.5–26.0 FB 36.6 Following Selections for Size M–1P Only. 26.1–27.7 — FB 38.3 27.8–28.9 — FB 40.2 29.0–30.6 — FB 42.0 30.7–32.5 — FB 44.0 32.6–36.0 — FB 46.0 Motor FLC (A) Thermal Unit Number 1 T. U. 3 T. U. 2.42–2.67 2.42–2.67 FB 3.33 2.68–3.00 2.68–3.00 FB 3.71 3.01–3.36 3.01–3.36 FB 4.1 3.37–3.53 3.37–3.53 FB 4.5 3.54–3.91 3.54–3.91 FB 4.75 3.92–4.41 3.92–4.41 FB 5.3 4.42–4.83 4.42–4.83 FB 6.1 4.84–5.45 4.84–5.45 FB 6.75 5.46–5.89 5.46–5.89 FB 7.45 5.90–6.04 5.90–6.04 FB 7.8 6.05–6.55 6.05–6.55 FB 8.21 6.56–6.72 6.56–6.72 FB 8.6 6.73–7.00 6.73–7.00 FB 9.0 7.01–7.39 7.01–7.39 FB 9.5 7.40–7.54 7.40–7.54 FB 10.0 7.55–8.41 7.55–8.41 FB 10.6 8.42–8.91 8.42–8.91 FB 11.2 8.92–9.16 8.92–9.16 FB 12.1 9.17–10.0 9.17–10.0 FB 13.1 10.1–10.3 10.1–10.3 FB 13.9 10.4–11.4 10.4–11.4 FB 14.8 11.5–11.8 11.5–11.8 FB 15.6 11.9–12.9 11.9–12.9 FB 16.4 13.0–13.4 — FB 17.6 13.5–14.2 — FB 18.4 14.3–15.1 — FB 19.4 15.2–18.0 — FB 21.1 Following Selections for Size M–1 & M–1P Only. — 11.5–11.8 FB 15.6 — 11.9–12.9 FB 16.4 — 13.0–13.4 FB 17.6 — 13.5–14.2 FB 18.4 — 14.3–15.1 FB 19.4 15.2–17.1 15.2–17.1 FB 21.1 17.2–18.0 17.2–18.0 FB 22.6 18.1–18.9 18.1–18.9 FB 23.6 19.0–19.7 19.0–19.7 FB 24.8 19.8–20.9 19.8–20.9 FB 26.7 21.0–21.9 21.0–21.9 FB 28.3 22.0–23.1 22.0–23.1 FB 29.6 23.2–24.3 23.2–24.3 FB 30.5 24.4–25.5 24.4–25.5 FB 32.6 25.6–26.0 25.6–26.0 FB 34.1 Following Selections for Size M–1P Only. 26.1–26.8 — FB 35.0 26.9–27.3 — FB 36.6 27.4–28.7 — FB 38.3 28.8–30.2 — FB 40.2 30.3–31.9 — FB 42.0 32.0–36.0 — FB 44.0 Table 69 3.46–3.90 3.91–4.44 4.45–4.91 4.92–5.51 5.52–5.84 5.85–6.54 6.55–7.33 7.34–8.31 8.32–9.22 9.23–10.0 10.1–11.2 11.3–12.5 12.6–14.2 14.3–16.1 16.2–18.4 18.5–20.5 20.6–23.2 23.3–26.6 26.7–29.6 29.7–33.5 33.6–37.2 37.3–41.5 41.6–45.0 — 3.38–3.65 3.66–4.07 4.08–4.36 4.37–5.19 5.20–5.59 5.60–5.98 5.99–6.78 6.79–7.91 7.92–9.12 9.13–10.0 10.1–10.7 10.8–12.0 12.1–13.5 13.6–14.6 14.7–16.7 16.8–18.9 19.0–21.6 21.7–24.1 24.2–27.6 27.7–31.2 31.3–35.5 35.6–37.8 37.9–41.5 41.6–45.0 Thermal Unit Number B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 16 3 T. U. NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Motor FLC (A) 1 or 2 T. U. © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-137 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 74–83 www.schneider-electric.us Table 74 Motor FLC (A) Table 76 Thermal Unit Number 1 T. U. 3 T. U. 2.23–2.47 2.23–2.47 FB 3.33 2.48–2.76 2.48–2.76 FB 3.71 2.77–3.04 2.77–3.04 FB 4.1 3.05–3.24 3.05–3.24 FB 4.5 3.25–3.61 3.25–3.61 FB 4.75 3.62–4.19 3.62–4.19 FB 5.3 4.20–4.62 4.20–4.62 FB 6.1 4.63–5.14 4.63–5.14 FB 6.75 5.15–5.39 5.15–5.39 FB 7.45 5.40–5.69 5.40–5.69 FB 7.8 5.70–5.99 5.70–5.99 FB 8.21 6.00–6.29 6.00–6.29 FB 8.6 6.30–6.64 6.30–6.64 FB 9.0 6.65–6.99 6.65–6.99 FB 9.5 7.00–7.39 7.00–7.39 FB 10.0 7.40–7.79 7.40–7.79 FB 10.6 7.80–7.94 7.80–7.94 FB 11.2 7.95–8.49 7.95–8.49 FB 12.1 8.50–8.99 8.50–8.99 FB 13.1 9.00–9.59 9.00–9.59 FB 13.9 9.60–10.1 9.60–10.1 FB 14.8 10.2–10.6 10.2–10.6 FB 15.6 10.7–11.3 10.7–11.3 FB 16.4 11.4–12.0 11.4–12.0 FB 17.6 12.0–12.6 — FB 18.4 12.7–13.8 — FB 19.4 13.9–14.7 — FB 21.1 14.8–15.2 — FB 22.6 15.3–16.2 — FB 23.6 16.3–18.0 — FB 24.8 Following Selections for Size 1 Only. — 12.0–12.6 FB 18.4 — 12.7–13.8 FB 19.4 13.9–14.7 13.9–14.7 FB 21.1 14.8–15.2 14.8–15.2 FB 22.6 15.3–16.2 15.3–16.2 FB 23.6 16.3–17.4 16.3–17.4 FB 24.8 17.5–18.5 17.5–18.5 FB 26.7 18.6–19.6 18.6–19.6 FB 28.3 19.7–20.2 19.7–20.2 FB 29.6 20.3–21.5 20.3–21.5 FB 30.5 21.6–22.4 21.6–22.4 FB 32.6 22.5–23.2 22.5–23.2 FB 34.1 23.3–24.3 23.3–24.3 FB 35.0 24.4–25.4 24.4–25.4 FB 36.6 25.5–26.0 25.5–26.0 FB 38.3 Table 75 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Motor FLC (A) 3.22–3.57 3.58–4.14 4.15–4.56 4.57–5.10 5.11–5.39 5.40–5.64 5.65–5.96 5.97–6.25 6.26–6.58 6.59–6.91 6.92–7.41 7.42–7.82 7.83–8.32 8.33–8.89 8.90–9.47 9.48–10.0 10.1–10.5 10.6–11.1 11.2–12.0 12.1–12.7 12.8–13.5 13.6–14.6 14.7–15.7 15.8–16.5 16.6–17.4 17.5–18.8 18.9–20.1 20.2–21.0 21.1–21.6 21.7–23.3 23.4–24.3 24.4–25.0 25.1–26.3 26.4–27.6 27.7–29.1 29.2–30.4 30.5–32.0 32.1–33.3 33.4–35.2 35.3–37.0 37.1–38.5 38.6–40.7 40.8–45.0 16-138 Thermal Unit Number FB 4.75 FB 5.3 FB 6.1 FB 6.75 FB 7.45 FB 7.8 FB 8.21 FB 8.6 FB 9.0 FB 9.5 FB 10.0 FB 10.6 FB 11.2 FB 12.1 FB 13.1 FB 13.9 FB 14.8 FB 15.6 FB 16.4 FB 17.6 FB 18.4 FB 19.4 FB 21.1 FB 22.6 FB 23.6 FB 24.8 FB 26.7 FB 28.3 FB 29.6 FB 30.5 FB 32.6 FB 34.1 FB 35.0 FB 36.6 FB 38.3 FB 40.2 FB 42.0 FB 44.0 FB 46.0 FB 48.0 FB 50.5 FB 52.5 FB 55.5 Motor FLC (A) 19.9–20.8 20.9–22.2 22.3–23.8 23.9–25.4 25.5–27.2 27.3–29.2 29.3–31.9 32.0–33.8 33.9–36.1 36.2–38.5 38.6–41.4 41.5–43.6 43.7–45.9 46.0–48.2 48.3–50.7 50.8–53.9 54.0–56.7 56.8–60.8 60.9–67.6 67.7–73.6 73.7–82.9 83.0–86.0 Table 79 Thermal Unit Number FB 26.7 FB 28.3 FB 29.6 FB 30.5 FB 32.6 FB 34.1 FB 38.3 FB 40.2 FB 42.0 FB 44.0 FB 46.0 FB 48.0 FB 50.5 FB 52.5 FB 55.5 FB 58.0 FB 60.0 FB 63.5 FB 69.0 FB 77.0 FB 84.0 FB 92.0 Table 77 Motor FLC (A) 48.0–50.9 51.0–53.7 53.8–57.0 57.1–60.4 60.5–64.0 64.1–71.9 72.0–83.9 84.0–93.1 93.2–104 105–109 110–123 124–133 Thermal Unit Number FB 50.5 FB 52.5 FB 55.5 FB 58.0 FB 60.0 FB 63.5 FB 69.0 FB 77.0 FB 84.0 FB 92.0 FB 105.0 FB 115.0 Table 78 Motor FLC (A) Thermal Unit 2 T. U. or Number 3 T. U. 2.26–2.51 2.26–2.51 FB 3.33 2.52–2.82 2.52–2.82 FB 3.71 2.83–3.09 2.83–3.09 FB 4.1 3.10–3.30 3.10–3.30 FB 4.5 3.31–3.69 3.31–3.69 FB 4.75 3.70–4.27 3.70–4.27 FB 5.3 4.28–4.72 4.28–4.72 FB 6.1 4.73–5.25 4.73–5.25 FB 6.75 5.26–5.53 5.26–5.53 FB 7.45 5.54–5.81 5.54–5.81 FB 7.8 5.82–6.14 5.82–6.14 FB 8.21 6.15–6.44 6.15–6.44 FB 8.6 6.45–6.81 6.45–6.81 FB 9.0 6.82–7.19 6.82–7.19 FB 9.5 7.20–7.59 7.20–7.59 FB 10.0 7.60–7.99 7.60–7.99 FB 10.6 8.00–8.17 8.00–8.17 FB 11.2 8.18–8.74 8.18–8.74 FB 12.1 8.75–9.31 8.75–9.31 FB 13.1 9.32–9.94 9.32–9.94 FB 13.9 9.95–10.5 9.95–10.5 FB 14.8 10.6–11.1 10.6–11.1 FB 15.6 11.2–11.9 11.2–12.0 FB 16.4 12.0–12.4 — FB 17.6 12.5–13.1 — FB 18.4 13.2–14.3 — FB 19.4 14.4–15.3 — FB 21.1 15.4–15.9 — FB 22.6 16.0–18.0 — FB 23.6 Following Selections for Size 1 Only. — 12.0–12.4 FB 17.6 — 12.5–13.1 FB 18.4 — 13.2–14.3 FB 19.4 14.4–15.3 14.4–15.3 FB 21.1 15.4–15.9 15.4–15.9 FB 22.6 16.0–16.9 16.0–16.9 FB 23.6 17.0–18.3 17.0–18.3 FB 24.8 18.4–19.5 18.4–19.5 FB 26.7 19.6–20.5 19.6–20.5 FB 28.3 20.6–21.1 20.6–21.1 FB 29.6 21.2–22.6 21.2–22.6 FB 30.5 22.7–23.7 22.7–23.7 FB 32.6 23.8–24.3 23.8–24.3 FB 35.0 24.4–26.0 24.4–26.0 1 T. U. Motor FLC (A) 3.31–3.67 3.68–4.23 4.24–4.69 4.70–5.21 5.22–5.49 5.50–5.74 5.75–6.07 6.08–6.35 6.36–6.71 6.72–7.03 7.04–7.53 7.54–7.91 7.92–8.53 8.54–9.14 9.15–9.71 9.72–10.2 10.3–10.8 10.9–11.5 11.6–12.3 12.4–13.0 13.1–13.9 14.0–15.1 15.2–16.1 16.2–16.9 17.0–17.9 18.0–19.4 19.5–20.7 20.8–21.7 21.8–22.3 22.4–23.9 24.0–25.1 25.2–25.9 26.0–27.1 27.2–28.6 28.7–30.1 30.2–31.7 31.8–33.3 33.4–34.5 34.6–36.5 36.6–38.5 38.6–39.9 40.0–45.0 Table 81 Thermal Unit Number FB 4.75 FB 5.3 FB 6.1 FB 6.75 FB 7.45 FB 7.8 FB 8.21 FB 8.6 FB 9.0 FB 9.5 FB 10.0 FB 10.6 FB 11.2 FB 12.1 FB 13.1 FB 13.9 FB 14.8 FB 15.6 FB 16.4 FB 17.6 FB 18.4 FB 19.4 FB 21.1 FB 22.6 FB 23.6 FB 24.8 FB 26.7 FB 28.3 FB 29.6 FB 30.5 FB 32.6 FB 34.1 FB 35.0 FB 36.6 FB 38.3 FB 40.2 FB 42.0 FB 44.0 FB 46.0 FB 48.0 FB 50.5 FB 52.5 Table 80 Motor FLC (A) 20.5–21.7 21.8–23.1 23.2–24.8 24.9–26.5 26.6–28.4 28.5–30.4 30.5–32.8 32.9–34.9 35.0–37.3 37.4–39.8 39.9–42.5 42.6–45.8 45.9–48.2 48.3–50.6 50.7–53.1 53.2–56.5 56.6–59.4 59.5–63.4 63.5–71.0 71.1–78.8 78.9–86.0 Index and Instructions: pages 16-125—16-129 Thermal Unit Number FB 26.7 FB 28.3 FB 29.6 FB 30.5 FB 32.6 FB 34.1 FB 38.3 FB 40.2 FB 42.0 FB 44.0 FB 46.0 FB 48.0 FB 50.5 FB 52.5 FB 55.5 FB 58.0 FB 60.0 FB 63.5 FB 69.0 FB 77.0 FB 84.0 Motor FLC (A) 52.2–55.6 55.7–58.8 58.9–62.5 62.6–66.0 66.1–70.1 70.2–78.6 78.7–92.0 92.1–102 103–114 115–123 124–133 Thermal Unit Number FB 50.5 FB 52.5 FB 55.5 FB 58.0 FB 60.0 FB 63.5 FB 69.0 FB 77.0 FB 84.0 FB 92.0 FB 105.0 Table 82 Motor FLC (A) 2.36–2.63 2.64–2.96 2.97–3.23 3.24–3.45 3.46–3.86 3.87–4.44 4.45–4.95 4.96–5.47 5.48–5.75 5.76–6.09 6.10–6.42 6.43–6.75 6.76–7.16 7.17–7.43 7.44–7.99 8.00–8.46 8.47–9.19 9.20–9.74 9.75–10.3 10.4–10.8 10.9–11.6 11.7–12.2 12.3–13.1 13.2–13.7 13.8–14.3 14.4–15.5 15.6–16.7 16.8–17.6 17.7–18.6 18.7–19.9 20.0–21.1 21.2–25.0 Thermal Unit Number FB 3.33 FB 3.71 FB 4.1 FB 4.5 FB 4.75 FB 5.3 FB 6.1 FB 6.75 FB 7.45 FB 7.8 FB 8.21 FB 8.6 FB 9.0 FB 9.5 FB 10.0 FB 10.6 FB 11.2 FB 12.1 FB 13.1 FB 13.9 FB 14.8 FB 15.6 FB 16.4 FB 17.6 FB 18.4 FB 19.4 FB 21.1 FB 22.6 FB 23.6 FB 24.8 FB 92.0 FB 105.0 Table 83 Motor FLC (A) 2.30–2.60 2.61–2.87 2.88–3.17 3.18–3.37 3.38–3.76 3.77–4.29 4.30–4.75 4.76–5.26 5.27–5.51 5.52–5.78 5.79–6.13 6.14–6.41 6.42–6.75 6.76–7.09 7.10–7.57 7.58–7.90 7.91–8.81 8.82–9.47 9.48–10.0 10.1–10.7 10.8–11.4 11.5–12.1 12.2–13.1 13.2–13.7 13.8–14.7 14.8–16.0 16.1–17.3 17.4–18.2 18.3–19.4 19.5–20.7 20.8–22.3 22.4–23.5 23.6–24.2 24.3–26.0 Thermal Unit Number FB 3.33 FB 3.71 FB 4.1 FB 4.5 FB 4.75 FB 5.3 FB 6.1 FB 6.75 FB 7.45 FB 7.8 FB 8.21 FB 8.6 FB 9.0 FB 9.5 FB 10.0 FB 10.6 FB 11.2 FB 12.1 FB 13.1 FB 13.9 FB 14.8 FB 15.6 FB 16.4 FB 17.6 FB 18.4 FB 19.4 FB 21.1 FB 22.6 FB 23.6 FB 24.8 FB 26.7 FB 28.3 FB 29.6 FB 30.5 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 84–93 www.schneider-electric.us Motor FLC (A) 3.38–3.78 3.79–4.37 4.38–4.87 4.88–5.51 5.52–5.73 5.74–6.09 6.10–6.44 6.45–6.75 6.76–7.15 7.16–7.57 7.58–8.07 8.08–8.47 8.48–8.81 8.82–9.46 9.47–10.1 10.2–10.8 10.9–11.4 11.5–12.1 12.2–13.1 13.2–13.8 13.9–14.8 14.9–16.1 16.2–17.4 17.5–18.3 18.4–19.5 19.6–21.0 21.1–22.5 22.6–23.7 23.8–24.5 24.6–26.4 26.5–27.7 27.8–28.7 28.8–29.9 30.0–31.8 31.9–33.5 33.6–35.1 35.2–37.1 37.2–38.8 38.9–41.1 41.2–45.0 Table 86 Thermal Unit Number FB 4.75 FB 5.3 FB 6.1 FB 6.75 FB 7.45 FB 7.8 FB 8.21 FB 8.6 FB 9.0 FB 9.5 FB 10.0 FB 10.6 FB 11.2 FB 12.1 FB 13.1 FB 13.9 FB 14.8 FB 15.6 FB 16.4 FB 17.6 FB 18.4 FB 19.4 FB 21.1 FB 22.6 FB 23.6 FB 24.8 FB 26.7 FB 28.3 FB 29.6 FB 30.5 FB 32.6 FB 34.1 FB 35.0 FB 36.6 FB 38.3 FB 40.2 FB 42.0 FB 44.0 FB 46.0 FB 48.0 Table 85 Thermal Unit Number FB 44.0 FB 46.0 FB 48.0 FB 50.5 FB 52.5 FB 55.5 FB 58.0 FB 60.0 FB 63.5 FB 69.0 FB 77.0 FB 84.0 FB 92.0 FB 105.0 Table 88 Thermal Unit Number A .49 A .54 A .59 A .65 A .71 A .78 A .86 A .95 A 1.02 A 1.16 A 1.25 A 1.39 A 1.54 A 1.63 A 1.75 A 1.86 A 1.99 A 2.15 A 2.31 A 2.57 A 2.81 A 3.61 A 3.95 A 4.32 A 4.79 A 5.30 A 5.78 A 6.20 A 6.99 A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 A 11.9 A 132 A 14.1 A 14.8 A 16.2 A 17.9 A 21.3 A 25.2 A 27.1 A 29.5 A 31.9 A 33.8 A 35.9 A 40.0 A 42.3 A 44.7 Table 87 Motor FLC (A) 0.40–0.41 0.42–0.45 0.46–0.51 0.52–0.58 0.59–0.63 0.64–0.68 0.69–0.76 0.77–0.83 0.84–0.93 0.94–1.01 1.02–1.14 1.15–1.28 1.29–1.34 1.35–1.44 1.45–1.55 1.56–1.61 1.62–1.71 1.72–1.85 1.86–2.04 2.05–2.38 2.39–2.60 2.61–2.77 2.78–2.98 2.99–3.40 3.41–3.64 3.65–4.08 4.09–4.38 4.39–4.68 4.69–4.79 4.80–5.11 5.12–5.84 5.85–6.70 6.71–7.18 7.19–7.70 7.71–8.14 8.15–8.56 8.57–9.15 9.16–9.80 9.81–10.6 10.7–11.0 Thermal Unit Number A .49 A .54 A .59 A .65 A .71 A .78 A .86 A .95 A 1.02 A 1.16 A 1.25 A 1.39 A 1.54 A 1.63 A 1.75 A 1.86 A 1.99 A 2.15 A 2.31 A 2.57 A 2.81 A 3.61 A 3.95 A 4.32 A 4.79 A 5.30 A 5.78 A 6.20 A 6.99 A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 A 11.9 A 13.2 A 14.1 A 14.8 A 16.2 A 17.9 Motor FLC (A) 0.39–0.40 0.41–0.44 0.45–0.49 0.50–0.57 0.58–0.61 0.62–0.66 0.67–0.73 0.74–0.80 0.81–0.90 0.91–0.97 0.98–1.09 1.10–1.23 1.24–1.57 1.58–1.66 1.67–1.79 1.80–1.99 2.00–2.31 2.32–2.50 2.51–2.66 2.67–2.85 2.86–3.26 3.27–3.49 3.50–3.92 3.93–4.20 4.21–4.49 4.50–4.64 4.65–4.94 4.95–5.62 5.63–6.39 6.40–6.82 6.83–7.27 7.28–7.71 7.72–8.13 8.14–8.64 8.65–9.15 9.16–9.97 9.98–11.0 Table 91 Thermal Unit Number A .49 A .54 A .59 A .65 A .71 A .78 A .86 A .95 A 1.02 A 1.16 A 1.25 A 1.39 A 1.86 A 1.99 A 2.15 A 2.31 A 2.57 A 2.81 A 3.61 A 3.95 A 4.32 A 4.79 A 5.30 A 5.78 A 6.20 A 6.99 A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 A 11.9 A 13.2 A 14.1 A 14.8 A 16.2 A 17.9 Table 89 Motor FLC (A) 10.0–11.1 11.2–12.0 12.1–13.3 13.4–15.1 15.2–17.1 17.2–18.6 18.7–21.4 21.5–25.7 25.8–28.2 28.3–29.7 29.8–31.2 31.3–32.1 32.2–35.7 35.8–40.7 40.8–48.0 Thermal Unit Number B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 B 88.0 Table 90 Motor FLC (A) 4.88–5.13 5.14–5.85 5.86–6.67 6.68–7.09 7.10–7.62 7.63–8.04 8.05–8.46 8.47–9.11 9.12–9.69 9.70–10.5 10.6–11.6 11.7–12.3 12.4–14.6 14.7–16.8 16.9–17.9 18.0–18.7 18.8–19.8 19.9–21.4 21.5–22.8 22.9–23.8 23.9–26.0 Thermal Unit Number A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 A 11.9 A 13.2 A 14.1 A 14.8 A 16.2 A 17.9 A 21.3 A 25.2 A 27.1 A 29.5 A 31.9 A 33.8 A 35.9 A 40.0 A 42.3 A 44.7 Motor FLC (A) 4.80–5.07 5.08–5.73 5.74–6.48 6.49–6.90 6.91–7.25 7.26–7.81 7.82–8.29 8.30–8.81 8.82–9.40 9.41–10.0 10.1–11.1 11.2–11.7 11.8–13.7 13.8–16.0 16.1–16.9 17.0–17.7 17.8–18.7 18.8–20.2 20.3–21.4 21.5–22.5 22.6–23.8 23.9–26.0 Thermal Unit Number A 7.65 A 8.38 A 9.25 A 9.85 A 11.0 A 11.9 A 13.2 A 14.1 A 14.8 A 16.2 A 17.9 A 21.3 A 25.2 A 27.1 A 29.5 A 31.9 A 33.8 A 35.9 A 40.0 A 42.3 A 44.7 A 48.0 Table 92 Motor FLC (A) 10.5–11.7 11.8–12.5 12.6–14.0 14.1–15.8 15.9–18.0 18.1–19.6 19.7–23.5 23.6–27.4 27.5–30.5 30.6–32.2 32.3–34.0 34.1–35.2 35.3–39.5 39.6–43.9 44.0–48.0 Thermal Unit Number B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 B 88.0 Table 93 Motor FLC (A) 23.8–25.2 25.3–26.8 26.9–28.4 28.5–30.3 30.4–32.1 32.2–34.2 34.3–36.3 36.4–40.2 40.3–43.1 43.2–45.9 46.0–49.2 49.3–51.6 51.7–54.2 54.3–55.7 55.8–60.3 60.4–63.5 63.6–67.1 67.2–70.3 70.4–74.1 74.2–78.3 78.4–83.3 83.4–86.0 Thermal Unit Number CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 16 Motor FLC (A) 42.9–45.4 45.6–48.3 48.4–52.4 52.5–55.9 56.0–59.8 59.9–63.8 63.9–67.9 68.0–72.6 72.7–83.2 83.3–94.7 94.8–105 106–116 117–121 122–133 Motor FLC (A) 0.43–0.44 0.45–0.47 0.48–0.53 0.54–0.61 0.62–0.65 0.66–0.71 0.72–0.79 0.80–0.86 0.87–0.96 0.97–1.04 1.05–1.17 1.18–1.31 1.32–1.38 1.39–1.47 1.48–1.57 1.58–1.65 1.66–1.77 1.78–1.93 1.94–2.18 2.19–2.46 2.47–2.68 2.69–2.87 2.88–3.07 3.08–3.59 3.60–3.79 3.80–4.27 4.28–4.59 4.60–4.90 4.91–5.06 5.07–5.44 5.45–6.24 6.25–7.21 7.22–7.69 7.70–8.24 8.25–8.81 8.82–9.32 9.33–9.99 10.0–10.5 10.6–11.5 11.6–12.2 12.3–13.3 13.4–15.8 15.9–18.4 18.5–20.5 20.6–21.5 21.6–23.9 24.0–26.8 26.9–28.2 28.3–29.8 29.9–32.0 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 84 © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-139 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 94–102 www.schneider-electric.us Table 94 Motor FLC (A) 25.8–27.5 27.6–29.4 29.5–31.4 31.5–33.2 33.3–36.2 36.3–38.8 38.9–41.6 41.7–44.7 44.8–47.9 48.0–50.9 51.0–54.4 54.5–57.4 57.5–60.6 60.7–63.9 64.0–68.4 68.5–73.4 73.5–78.7 78.8–83.8 83.9–86.0 Table 95 Motor FLC (A) 42.5–44.7 44.8–47.9 48.0–51.2 51.3–55.2 55.3–59.4 59.5–63.8 63.9–68.8 68.9–73.8 73.9–77.7 77.8–82.5 82.6–86.6 86.7–91.9 92.0–97.2 97.3–104 105–114 115–123 124–150 Thermal Unit Number CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 CC 208.0 CC 219.0 Table 96 Motor FLC (A) 49.5–52.0 52.1–54.8 54.9–58.7 58.8–63.3 63.4–68.3 68.4–73.6 73.7–79.4 79.5–85.5 85.6–89.7 89.8–94.8 94.9–99.9 100–105 106–111 112–126 127–131 132–141 142–150 Table 99 Table 97 Thermal Unit Number CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 Thermal Unit Number CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 CC 208.0 CC 219.0 Motor FLC (A) 0.57–0.60 0.61–0.66 0.67–0.73 0.74–0.81 0.82–0.90 0.91–1.05 1.06–1.15 1.16–1.25 1.26–1.35 1.36–1.47 1.48–1.58 1.59–1.74 1.75–1.94 1.95–2.20 2.21–2.47 2.48–2.76 2.77–3.07 3.08–3.45 3.46–3.81 3.82–4.20 4.21–4.65 4.66–5.29 5.30–5.84 5.85–6.27 6.28–6.97 6.98–7.59 7.60–7.89 7.90–8.95 8.96–10.3 10.4–11.7 11.8–13.3 13.4–15.2 15.3–17.2 17.3–19.7 19.8–22.4 22.5–26.0 Thermal Unit Number AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 Table 98 Motor FLC (A) 4.24–4.62 4.63–5.05 5.06–5.54 5.55–6.13 6.14–6.44 6.45–7.48 7.49–8.55 8.56–9.74 9.75–11.1 11.2–12.7 12.8–14.4 14.5–16.4 16.5–18.9 19.0–21.6 21.7–23.3 23.4–24.9 25.0–26.9 27.0–29.1 29.2–31.3 31.4–33.5 33.6–36.9 37.0–39.1 39.2–40.9 41.0–45.0 Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 AR 94.0 Motor FLC (A) 27.1–30.0 30.1–33.2 33.3–35.7 35.8–39.4 39.5–43.4 43.5–46.9 47.0–51.5 51.6–57.0 57.1–62.8 62.9–69.1 69.2–75.0 75.1–83.3 Thermal Unit Number E 67 E 69 E 70 E 71 E 72 E 73 E 74 E 76 E 77 E 78 E 79 E 80 Table 100 Motor FLC (A) 50–55.9 56–60.9 91–65.9 66–69.9 70–75.9 76–81.9 82–86.9 87–92.9 93–97.9 98–107.9 108–113.9 114–125.9 Thermal Unit Number E 88 E 89 E 91 E 92 E 93 E 94 E 96 E 97 E 98 E 99 E 101 E 102 Table 101 Motor FLC (A) 105–116 117–132 133–148 149–165 166–184 185–207 208–229 230–266 Thermal Unit Number AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 Table 102 Motor FLC (A) 146–169 170–185 186–201 202–217 218–236 237–253 254–279 280–311 312–353 354–396 397–442 443–492 493–520 Thermal Unit Number AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-140 Index and Instructions: pages 16-125—16-129 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 103–110 www.schneider-electric.us Table 105 Motor FLC (A) 40.8–45.5 45.6–49.9 51.0–57.5 57.6–65.9 66.0–73.1 73.2–81.5 81.6–92.3 92.4–104 105–114 115–128 129–140 141–160 161–193 194–209 210–232 233–248 249–266 Thermal Unit Number B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 Table 104 Thermal Unit No. B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 15.6–17.9 18.0–21.4 21.5–25.1 25.2–27.0 B 32.0 B 36.0 B 40.0 B 45.0 Max. Fuse Rating (A) 1.50 1.50 1.60 2.00 2.00 2.25 2.60 3.00 3.50 4.00 4.50 5.00 5.60 6.00 7.00 7.00 8.00 9.00 10.0 12.0 12.0 15.0 15.0 15.0 17.5 17.5 20.0 25.0 25.0 30.0 600 V 250 V Max. Max. 30 30 30 40 30 40 30 40 Thermal Unit Number CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 CC 196.0 Table 109 Motor FLC (A) 0.56–0.63 0.64–0.68 0.69–0.77 0.78–0.85 0.86–0.97 0.98–1.09 1.10–1.21 1.22–1.33 1.34–1.53 1.54–1.73 1.74–1.89 1.90–2.17 2.18–2.53 2.54–2.87 2.88–3.22 3.23–3.49 3.50–3.85 3.86–4.11 4.12–4.70 4.71–5.21 5.22–5.53 5.54–6.17 6.18–7.02 7.03–7.92 7.93–8.61 8.62–9.17 9.18–10.0 10.1–11.0 11.1–11.8 11.9–13.5 13.6–15.3 15.4–17.4 17.5–19.4 19.5–22.2 22.3–25.1 25.2–27.0 Thermal Unit Number B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 Table 110 Motor FLC (A) 3.94–4.45 4.46–4.97 4.98–5.28 5.29–5.97 5.98–6.89 6.90–7.92 7.93–8.71 8.72–9.27 9.28–10.2 10.3–11.4 11.5–12.3 12.4–13.9 14.0–15.8 15.9–17.9 18.0–19.9 20.0–22.8 22.9–25.4 25.5–28.9 29.0–30.8 30.9–32.5 32.6–34.9 35.0–39.7 39.8–44.7 Thermal Unit Number B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 16 Motor FLC (A) 0.65–0.73 0.74–0.82 0.93–0.91 0.92–1.04 1.05–1.16 1.17–1.26 1.27–1.47 1.48–1.65 1.66–1.89 1.90–2.17 2.18–2.49 2.50–2.79 2.80–3.13 3.14–3.36 3.37–3.69 3.70–3.92 3.93–4.42 4.43–4.99 5.00–5.27 5.28–5.84 5.85–6.61 6.62–7.42 7.43–8.02 8.03–8.53 8.54–9.34 9.35–10.1 10.2–10.8 10.9–12.0 12.1–13.0 13.1–15.5 Motor FLC (A) 105–112 113–122 123–131 132–142 143–153 154–157 158–169 170–181 182–195 196–209 210–227 228–247 248–266 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 103 © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-141 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 111–116 www.schneider-electric.us Table 111 Motor FLC (A) 14.0–14.9 15.0–16.2 16.3–17.2 17.3–18.7 18.8–20.2 20.3–21.7 21.8–23.3 23.4–25.2 25.3–27.1 27.2–29.4 29.5–31.6 31.7–34.0 34.1–36.8 36.9–39.8 39.9–42.3 42.4–45.7 45.8–49.2 49.3–52.8 52.9–56.8 56.9–61.2 61.3–66.1 66.2–71.2 71.3–76.7 76.8–82.9 83.0–90.0 Table 114 Thermal Unit Number CC 20.9 CC 22.8 CC 24.6 CC 26.3 CC 28.8 CC 31.0 CC 33.3 CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 Table 112 Motor FLC (A) 44.0–46.8 46.9–50.6 50.7–54.5 54.6–58.4 58.5–62.9 63.0–67.7 67.8–72.9 73.0–78.1 78.2–83.9 84.0–91.1 91.2–97.5 97.6–104 105–113 114–133 Thermal Unit Number CC 64.3 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 CC 156.0 CC 167.0 CC 180.0 Table 113 Motor FLC (A) 88.2–95.1 95.2–101 102–111 112–119 120–131 132–149 150–170 171–180 181–197 198–204 205–213 214–237 238–243 244–266 Thermal Unit Number DD 112.0 DD 121.0 DD 128.0 DD 140.0 DD 150.0 DD 160.0 DD 185.0 DD 220.0 DD 240.0 DD 250.0 DD 265.0 DD 280.0 DD 300.0 DD 320.0 Motor FLC (A) 133–148 149–174 175–195 196–219 220–239 240–271 272–308 309–348 349–397 398–429 430–495 496–520 Thermal Unit Number B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 Table 115 Motor FLC (A) 176–190 191–203 203–223 224–239 240–253 254–299 300–341 342–361 362–395 396–409 410–427 428–475 476–487 488–532 Thermal Unit Number DD 112.0 DD 121.0 DD 128.0 DD 140.0 DD 150.0 DD 160.0 DD 185.0 DD 220.0 DD 240.0 DD 250.0 DD 265.0 DD 289.0 DD 300.0 DD 320.0 Table 116 Motor FLC (A)) 81.6–91.1 91.2–101 102–115 116–131 132–146 147–163 164–184 185–209 210–229 230–257 258–281 282–321 322–387 388–419 420–465 466–497 496–532 Thermal Unit Number B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.35 B 5.60 B 6.25 B 6.90 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-142 Index and Instructions: pages 16-125—16-129 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 117–127 www.schneider-electric.us Motor FLC (A) 100–111.9 112–121.9 122–131.9 132–139.9 140–151.9 152–163.9 164–173.9 174–185.9 186–195.9 196–215.9 216–227.9 228–251.9 Table 122 Thermal Unit Number E 88 E 89 E 91 E 92 E 93 E 94 E 96 E 97 E 98 E 99 E 101 E 102 Table 118 Motor FLC (A) 210–233 234–265 266–297 298–331 332–369 370–415 416–459 460–532 Thermal Unit Number AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.8 AR 5.3 AR 5.8 AR 6.4 Table 121 Thermal Unit Number AR 1.05 AR 1.15 AR 1.26 AR 1.39 AR 1.53 AR 1.68 AR 1.85 AR 2.04 AR 2.24 AR 2.46 AR 2.71 AR 2.98 AR 3.28 AR 3.62 AR 3.98 AR 4.37 AR 4.80 AR 5.3 AR 5.8 AR 6.4 AR 7.0 AR 7.7 AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 Thermal Unit Number AR 8.5 AR 9.3 AR 10.2 AR 11.2 AR 12.4 AR 13.6 AR 15.4 AR 17.6 AR 20.5 AR 23.0 AR 27.0 AR 30.0 AR 35.0 AR 40.0 AR 44.0 AR 47.0 AR 51.0 AR 55.0 AR 60.0 AR 66.0 AR 72.0 AR 79.0 AR 86.0 AR 94.0 Table 123 Motor FLC (A) 54.2–60.1 60.2–66.5 66.6–71.5 71.6–78.9 79.0–86.9 87.0–93.9 94.0–103.1 103.2–114.1 114.2–125.7 125.8–138.3 138.4–150.1 150.2–166.6 Thermal Unit Number E 67 E 69 E 70 E 71 E 72 E 73 E 74 E 76 E 77 E 78 E 79 E 80 Table 127 Motor FLC (A) 1.12–1.27 1.28–1.37 1.38–1.55 1.56–1.71 1.72–1.95 1.96–2.19 2.20–2.43 2.44–2.67 2.68–3.07 3.08–3.47 3.48–3.79 3.80–4.35 4.36–5.07 5.08–5.75 5.76–6.45 6.46–6.99 7.00–7.71 7.72–8.23 8.24–9.41 9.42–10.43 10.44–11.07 11.08–12.35 12.36–14.05 14.06–15.85 15.86–17.23 17.24–18.35 18.36–20.1 20.2–22.1 22.2–23.7 23.8–27.1 27.2–30.7 30.8–34.9 35.0–38.9 39.0–44.5 44.6–50.3 50.4–54.0 Thermal Unit Number B 0.81 B 0.92 B 1.03 B 1.16 B 1.30 B 1.45 B 1.67 B 1.88 B 2.10 B 2.40 B 2.65 B 3.00 B 3.30 B 3.70 B 4.15 B 4.85 B 5.50 B 6.25 B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 16 Motor FLC (A) 1.14–1.21 1.22–1.33 1.34–1.47 1.48–1.63 1.64–1.81 1.82–2.11 2.12–2.31 2.32–2.51 2.52–2.71 2.72–2.95 2.96–3.17 3.18–3.49 3.50–3.89 3.90–4.41 4.42–4.95 4.96–5.53 5.54–6.15 6.16–6.91 6.92–7.63 7.64–8.41 8.42–9.31 9.32–10.59 10.60–11.69 11.70–12.55 12.56–13.95 13.96–15.19 15.20–15.79 15.80–17.91 17.92–20.7 20.8–23.5 23.6–26.7 26.8–30.5 30.6–34.5 34.6–39.5 39.6–44.9 45.0–52.0 Motor FLC (A) 8.48–9.25 9.26–10.11 10.12–11.09 11.10–12.27 12.28–12.89 12.90–14.97 14.98–17.11 17.12–19.49 19.50–22.3 22.4–22.5 22.6–28.9 29.0–32.9 33.0–37.9 38.0–43.3 43.4–46.7 46.8–49.9 50.0–53.9 54.0–58.3 58.4–62.7 62.8–67.1 67.2–73.8 74.0–78.3 78.4–81.9 82.0–90.0 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 117 © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-143 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 128–134 www.schneider-electric.us Table 128 Motor FLC (A) 7.88–8.91 8.92–9.95 9.96–10.57 10.58–11.95 11.96–13.79 13.80–15.85 15.86–17.43 17.44–18.55 18.56–20.5 20.6–22.9 23.0–24.7 24.8–27.9 28.0–31.7 31.8–35.9 36.0–39.9 40.0–45.7 45.8–50.9 51.0–61.7 61.8–65.1 65.2–69.9 70.0–79.5 79.6–89.4 Table 133 Thermal Unit Number B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 Table 129 Motor FLC (A) 28.0–29.9 30.0–32.5 32.6–34.5 34.6–37.5 37.6–40.5 40.6–43.5 43.6–46.7 46.8–50.5 50.6–54.3 54.4–58.9 59.0–63.3 63.4–68.1 68.2–73.7 73.8–79.7 79.8–84.7 84.8–91.5 91.6–98.5 98.6–105.7 105.8–113.7 113.8–122.5 122.6–132.3 132.4–142.5 142.6–153.5 153.6–165.9 166.0–180.0 Thermal Unit Number CC 20.9 CC 22.8 CC 24.6 CC 26.3 CC 28.8 CC 31.0 CC 33.3 CC 36.4 CC 39.6 CC 42.7 CC 46.6 CC 50.1 CC 54.5 CC 59.4 CC 64.5 CC 68.5 CC 74.6 CC 81.5 CC 87.7 CC 94.0 CC 103.0 CC 112.0 CC 121.0 CC 132.0 CC 143.0 Motor FLC (A) 4.60–5.23 5.24–5.86 5.87–6.25 6.26–7.09 7.10–8.25 8.26–9.49 9.50–10.3 10.4–11.2 11.3–12.5 12.6–13.8 13.9–15.0 15.1–16.9 17.0–19.1 19.2–22.0 22.1–24.4 24.5–28.0 28.1–31.8 31.9–36.0 36.1–38.5 38.6–41.2 41.3–44.4 44.5–50.3 50.4–56.9 57.0–59.0 Thermal Unit Number B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 B 88.0 Table 134 Motor FLC (A) 4.30–4.98 4.99–5.57 5.58–5.94 5.95–6.71 6.72–7.79 7.80–8.93 8.94–9.77 9.78–10.5 10.6–11.7 11.8–13.0 13.1–14.0 14.1–15.0 15.1–17.2 17.3–19.9 20.0–22.3 22.4–26.0 26.1–29.8 29.9–34.0 34.1–36.7 36.8–39.5 39.6–42.1 42.2–46.6 46.7–51.5 51.6–54.0 Thermal Unit Number B 6.90 B 7.70 B 8.20 B 9.10 B 10.2 B 11.5 B 12.8 B 14.0 B 15.5 B 17.5 B 19.5 B 22.0 B 25.0 B 28.0 B 32.0 B 36.0 B 40.0 B 45.0 B 50.0 B 56.0 B 62.0 B 70.0 B 79.0 B 88.0 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-144 Index and Instructions: pages 16-125—16-129 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 135–139 www.schneider-electric.us Table 137 Motor FLC (A) Thermal Unit Number 1 T. U. 3 T. U. 0.77–0.88 0.85–0.95 B 1.30 0.89–1.02 0.96–1.09 B 1.45 1.03–1.19 1.10–1.21 B 1.67 1.20–1.37 1.22–1.35 B 1.88 1.38–1.62 1.36–1.56 B 2.10 1.63–1.90 1.57–1.76 B 2.40 1.91–2.12 1.77–1.94 B 2.65 2.13–2.46 1.95–2.22 B 3.00 2.47–2.83 2.23–2.57 B 3.30 2.84–3.19 2.58–2.87 B 3.70 3.20–3.61 2.88–3.21 B 4.15 3.62–3.89 3.22–3.50 B 4.85 3.90–4.32 3.51–3.79 B 5.50 4.33–4.57 3.80–4.04 B 6.25 4.58–5.19 4.05–4.53 B 6.90 5.20–5.79 4.54–5.03 B 7.70 5.80–6.16 5.04–5.36 B 8.20 6.17–6.94 5.37–5.97 B 9.10 6.95–7.99 5.98–6.89 B 10.2 7.80–8.99 6.90–7.79 B 11.5 9.00–9.98 7.80–8.53 B 12.8 9.99–10.6 8.54–9.09 B 14.0 10.7–11.6 9.10–9.99 B 15.5 11.7–13.1 10.0–10.9 B 17.5 13.2–14.2 11.0–11.7 B 19.5 14.3–15.4 11.8–13.4 B 22.0 15.5–17.6 13.5–15.4 B 25.0 17.7–20.0 15.5–17.9 B 28.0 – 18.0–20.0 B 32.0 For Type DPSG12 & DPSG13, 20 Ampere Starter. Select Thermal Units from above. 20.1–22.7 18.0–20.2 B 32.0 22.8–25.0 20.3–23.2 B 36.0 – 23.3–25.0 B 40.0 For Type DPSG22 & DPSG23, 25 Ampere Starter. Select any of the Thermal Units from above. 22.8–26.1 – B 36.0 26.2–29.6 23.3–25.8 B 40.0 29.7–30.0 25.9–28.6 B 45.0 – 28.7–29.7 B 50.0 – 29.8–30.0 B 56.0 For Type DPSG32 & DPSG33, 30 Ampere Starter. Select any of the Thermal Units from above. Table 136 Thermal Unit Number E 88 E 89 E 91 E 92 E 93 E 94 E 96 E 97 E 98 E 99 E 101 E 102 E 103 E 104 E 106 E 107 Table 138 Motor FLC (A) 22.6–25.5 25.6–26.4 26.5–28.9 29.0–31.9 32.0–34.5 34.6–36.9 37.0–40.6 40.7–44.0 44.1–47.4 47.5–53.1 53.2–58.3 58.4–63.5 63.6–69.9 70.0–77.1 77.2–83.3 83.4–86.9 87.0–92.9 93.0–100 Thermal Unit Number E 62 E 65 E 66 E 67 E 69 E 70 E 71 E 72 E 73 E 74 E 76 E 77 E 78 E 79 E 80 E 96 E 97 E 98 Table 139 Motor FLC (A) 13.7–15.2 15.3–16.8 16.9–18.7 18.8–20.0 20.1–22.5 22.6–23.3 23.4–25.5 25.6–27.9 28.0–30.8 30.9–33.2 33.3–36.6 36.7–38.9 39.0–43.1 43.2–47.4 47.5–50.0 50.1–55.2 55.3–60.0 Thermal Unit Number E 57 E 59 E 60 E 61 E 62 E 65 E 66 E 67 E 69 E 70 E 71 E 72 E 73 E 74 E 76 E 77 E 78 16 Motor FLC (A) Thermal Unit Number 1 T. U. 3 T. U. 0.98–1.09 0.88–0.98 B 1.30 1.10–1.24 0.99–1.13 B 1.45 1.25–1.41 1.14–1.26 B 1.67 1.42–1.59 1.27–1.38 B 1.88 1.60–1.81 1.39–1.62 B 2.10 1.82–2.04 1.63–1.82 B 2.40 2.05–2.19 1.83–2.04 B 2.65 2.20–2.52 2.05–2.36 B 3.00 2.53–2.90 2.37–2.72 B 3.30 2.91–3.29 2.73–3.07 B 3.70 3.30–3.69 3.08–3.44 B 4.15 3.70–3.99 3.45–3.69 B 4.85 4.00–4.42 3.70–4.11 B 5.50 4.43–4.69 4.12–4.34 B 6.25 4.70–5.37 4.35–4.89 B 6.90 5.38–5.94 4.90–5.44 B 7.70 5.95–6.34 5.45–5.80 B 8.20 6.35–7.05 5.81–6.47 B 9.10 7.06–8.14 6.48–7.45 B 10.2 8.15–9.39 7.46–8.49 B 11.5 9.40–10.3 8.50–9.29 B 12.8 10.4–11.1 9.30–9.99 B 14.0 11.2–12.2 10.0–10.8 B 15.5 12.3–13.5 10.9–12.1 B 17.5 13.6–14.7 12.2–13.1 B 19.5 14.8–16.1 13.2–14.6 B 22.0 16.2–18.3 14.7–16.4 B 25.0 18.4–20.0 16.5–18.9 B 28.0 – 19.0–20.0 B 32.0 For Type DPSO12 & DPSO13, 20 Ampere Starter. Select Thermal Units from above. 18.4–20.9 – B 28.0 21.0–23.6 19.0–20.9 B 32.0 23.7–25.0 21.0–24.1 B 36.0 – 24.2–25.0 B 40.0 For Type DPSO22 & DPSO23, 25 Ampere Starter. Select any of the Thermal Units from above. – B 36.0 23.7–27.2 24.2–27.2 B 40.0 27.3–30.0 27.3–30.0 B 45.0 For Type DPSO32 & DPSO33, 30 Ampere Starter. Select any of the Thermal Units from above. Motor FLC (A) 50–55.9 56–60.9 61–65.9 66–69.9 70–75.9 76–81.9 82–86.9 87–92.9 93–97.9 98–107 108–113 114–125 126–138 139–153 154–163 164–180 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS Table 135 © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-145 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 140–143 www.schneider-electric.us Table 140 Table 142 Motor FLC (A) 0.34–0.36 0.37–0.40 0.41–0.43 0.44–0.47 0.48–0.51 0.52–0.56 0.57–0.62 0.63–0.67 0.68–0.73 0.74–0.77 0.78–0.84 0.85–0.93 0.94–1.00 1.01–1.08 1.09–1.15 1.16–1.27 1.28–1.45 1.46–1.61 1.62–1.81 1.82–2.00 2.01–2.12 2.13–2.29 2.30–2.43 2.44–2.66 2.67–2.98 2.99–3.16 3.17–3.39 3.40–3.69 3.70–4.00 4.01–4.48 4.49–5.00 5.01–5.44 5.45–5.99 6.00–6.60 6.61–6.96 6.97–7.26 7.27–7.99 8.00–8.89 8.90–9.74 9.75–10.50 10.6–11.5 11.6–12.3 12.4–13.4 13.5–15.2 15.3–17.2 17.3–18.4 18.5–20.6 20.7–21.3 21.4–23.4 23.5–24.0 Thermal Unit Number E3 E4 E5 E6 E7 E8 E9 E 11 E 12 E 13 E 14 E 16 E 17 E 18 E 19 E 23 E 24 E 26 E 27 E 28 E 29 E 31 E 32 E 33 E 34 E 36 E 37 E 38 E 39 E 41 E 42 E 44 E 46 E 47 E 48 E 49 E 50 E 51 E 52 E 53 E 54 E 55 E 56 E 57 E 60 E 61 E 62 E 65 E 66 E 67 Table 141 Motor FLC (A) 12.2–14.4 14.5–17.8 17.9–18.8 18.9–21.4 21.5–23.0 23.1–25.7 25.8–28.0 28.1–31.0 31.1–32.7 32.8–35.5 35.6–38.2 38.3–43.3 43.4–46.9 47.0–50.1 Thermal Unit No. Max. Fuse Rating (A) E56 E57 E60 25 30 40 E61 E62 E65 E66 E67 E69 E70 E71 E73 E73A E74 40 45 50 50 60 60 70 80 80 90 100 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 50.2–54.0 E76 600 V Max. 100 54.1–58.0 58.1–60.0 60.1–67.0 67.1–70.5 70.6–75.9 76.0–82.0 82.1–86.0 E77 E78 E79 E80 E94 E96 E97 100 100 100 100 100 100 100 16-146 250 V Max. 110 110 125 125 125 125 125 125 Motor FLC (A) 11.7–13.5 13.6–16.7 16.8–18.1 18.2–20.0 20.1–21.9 22.0–24.2 Thermal Unit No. E56 E57 E60 E61 E62 E65 Max. Fuse Rating (A) 25 30 35 40 40 45 24.3–26.2 26.3–29.2 29.3–32.0 32.1–34.3 34.4–36.2 36.3–39.9 40.0–43.8 43.9–46.2 46.3–50.0 E66 E67 E69 E70 E71 E73 E73A E74 E76 50 50 60 70 70 80 50.1–53.9 54.0–56.0 56.1–61.0 61.1–65.9 66.0–72.0 72.1–75.9 76.0–79.9 80.0–86.0 E77 E78 E79 E80 E94 E96 E98 E101 90 90 100 600 V Max. 100 100 100 100 100 100 100 100 250 V Max. 110 110 125 125 125 125 125 125 Table 143 Motor FLC (A) Thermal Unit No. Max. Fuse Rating (A) 18.9–20.0 20.1–22.8 22.9–24.7 24.8–26.9 27.0–29.2 29.3–32.8 32.9–34.9 35.0–37.5 37.6–39.6 39.7–46.1 46.2–49.9 50.0–56.3 56.4–61.0 61.1–64.0 64.1–66.0 66.1–72.4 72.5–78.2 78.3–83.9 84.0–86.0 86.1–92.8 92.9–97.9 98.0–105.0 105.1–117.0 117.1–133.0 E60 E61 E62 E65 E66 E67 E69 E70 E72 E73 E73A E74 E76 E77 E78 E79 E80 E94 E96 E97 E98 E101 E102 E103 40 45 50 50 60 60 70 70 80 80 100 110 125 125 125 125 150 175 175 175 200 200 200 200 Index and Instructions: pages 16-125—16-129 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 144–147 www.schneider-electric.us Table 144 Table 146 Motor FLC (A) 18.2–19.1 19.2–22.1 22.2–23.1 23.2–25.7 25.8–27.7 27.8–31.3 31.4–33.3 33.4–35.9 36.0–38.4 38.5–44.2 44.3–46.8 46.9–52.6 52.7–56.0 56.1–58.4 58.5–61.9 62.0–67.1 67.2–72.3 72.4–75.9 76.0–85.6 85.7–91.2 91.3–100.0 100.1–108.9 109.0–119.9 120.0–133.0 Thermal Unit No. E60 E61 E62 E65 E66 E67 E69 E70 E71 E73 E73A E74 E76 E77 E78 E79 E80 E94 E96 E98 E101 E102 E103 E104 Max. Fuse Rating (A) 40 40 45 50 50 60 70 70 80 80 90 100 110 125 125 125 150 150 150 175 200 200 200 200 Motor FLC (A) Thermal Unit Number 1 T.U. 3 T.U. 3.90–4.22 3.60–3.89 B5.50 4.23–4.49 3.90–4.15 B6.25 4.50–5.14 4.16–4.76 B6.90 5.15–5.78 4.77–5.30 B7.70 5.79–6.23 5.31–5.70 B8.20 6.24–7.03 5.71–6.46 B9.10 7.04–8.23 6.47–7.65 B10.2 8.24–9.31 7.66–8.55 B11.5 9.32–10.1 8.56–9.36 B12.8 10.2–10.7 9.37–9.9 B14.0 10.8–11.9 10.0–10.9 B15.5 12.0–13.1 11.0–12.0 B17.5 13.2–13.9 12.1–12.8 B19.5 14.0–15.9 12.9–14.2 B22.0 16.0–18.0 14.3–16.0 B25.0 18.1–20.8 16.1–18.5 B28.0 20.9–23.1 18.6–21.2 B32.0 23.2–26.9 21.3–24.9 B36.0 27.0–31.4 25.0–28.0 B40.0 31.5–36.0 28.1–31.7 B45.0 36.1–38.8 31.8–34.6 B50.0 38.9–41.7 34.7–37.4 B56.0 41.8–46.3 37.5–40.0 B62.0 46.4–50.0 40.1–46.4 B70.0 — 46.5–50.0 B79.0 For Type DPSG52 & DPSG53, 50 Ampere Starter. Select any of the Thermal Units from above. Table 147 Table 145 Motor FLC (A) Thermal Unit Number 16 NEMA/DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 1 T.U. 3 T.U. 1.00–1.11 0.91–1.02 B1.30 1.12–1.27 1.03–1.15 B1.45 1.28–1.36 1.16–1.27 B1.67 1.37–1.53 1.28–1.39 B1.88 1.54–1.78 1.40–1.61 B2.10 1.79–2.02 1.62–1.84 B2.40 2.03–2.20 1.85–2.03 B2.65 2.21–2.52 2.04–2.34 B3.00 2.53–2.94 2.35–2.69 B3.30 2.95–3.30 2.70–3.02 B3.70 3.31–3.70 3.03–3.39 B4.15 3.71–4.02 3.40–3.65 B4.85 4.03–4.46 3.66–4.04 B5.50 4.47–4.69 4.05–4.28 B6.25 4.70–5.37 4.29–4.85 B6.90 5.38–5.94 4.86–5.38 B7.70 5.95–6.34 5.39–5.71 B8.20 6.35–7.09 5.72–6.39 B9.10 7.10–8.46 6.40–7.53 B10.2 8.47–9.32 7.54–8.34 B11.5 9.33–10.2 8.35–9.14 B12.8 10.3–10.9 9.15–9.74 B14.0 11.0–12.1 9.75–10.7 B15.5 12.2–13.4 10.8–11.8 B17.5 13.5–14.2 11.9–12.2 B19.5 14.3–16.0 12.3–14.4 B22.0 16.1–18.1 14.5–16.4 B25.0 18.2–20.5 16.5–18.9 B28.0 20.6–23.5 19.0–21.3 B32.0 23.6–27.2 21.4–23.3 B36.0 27.3–30.8 23.4–27.9 B40.0 30.9–35.0 28.0–31.4 B45.0 35.1–37.2 31.5–32.5 B50.0 37.3–40.0 32.6–36.5 B56.0 — 36.6–40.0 B62.0 For Type DPSG42 & DPSG43, 40 Ampere Starter. Select any of the Thermal Units from above. Motor FLC (A) Thermal Unit Number 1 T.U. 3 T.U. 1.04–1.14 0.93–1.04 B1.30 1.15–1.29 1.05–1.18 B1.45 1.30–1.43 1.19–1.33 B1.67 1.44–1.56 1.34–1.43 B1.88 1.57–1.79 1.44–1.67 B2.10 1.80–2.03 1.68–1.88 B2.40 2.04–2.26 1.89–2.09 B2.65 2.27–2.51 2.10–2.41 B3.00 2.52–3.03 2.42–2.79 B3.30 3.04–3.31 2.80–3.15 B3.70 3.32–3.73 3.16–3.54 B4.15 3.74–4.07 3.55–3.75 B4.85 4.08–4.49 3.76–4.22 B5.50 4.50–4.76 4.23–4.46 B5.25 4.77–5.44 4.47–5.09 B6.90 5.45–6.04 5.10–5.61 B7.70 6.05–6.46 5.62–5.99 B8.20 6.47–7.24 6.00–6.70 B9.10 7.25–8.64 6.71–8.19 B10.20 8.65–9.59 8.20–8.79 B11.5 9.60–10.5 8.80–9.66 B12.8 10.6–11.3 9.67–10.2 B14.0 11.4–12.6 10.3–11.4 B15.5 12.7–13.9 11.5–12.6 B17.5 14.0–14.9 12.7–13.5 B19.5 15.0–16.5 13.6–15.1 B22.0 16.6–18.9 15.2–17.2 B25.0 19.0–22.2 17.3–19.9 B28.0 22.3–24.6 20.0–22.5 B32.0 24.7–28.6 22.6–26.2 B36.0 28.7–32.4 26.3–29.9 B40.0 32.5–37.3 30.0–34.0 B45.0 37.4–39.5 34.1–36.2 B50.0 39.6–40.0 36.3–38.7 B56.0 — 38.8–40.0 B62.0 For Type DPSO42 & DPSO43, 40 Ampere Starter. Select any of the Thermal Units from above. © 2009 Schneider Electric All Rights Reserved Index and Instructions: pages 16-125—16-129 16-147 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Thermal Unit Selection Tables 148–150 www.schneider-electric.us Table 148 Table 150 Motor FLC (A) Thermal Unit Number 1 T.U. 3 T.U. 4.14–4.45 3.70–4.09 B5.50 4.46–4.88 4.10–4.35 B6.25 4.89–5.44 4.36–5.07 B6.90 5.45–6.08 5.08–5.79 B7.70 6.09–6.42 5.80–6.27 B8.20 6.43–7.28 6.28–7.16 B9.10 7.29–8.42 7.17–8.58 B10.2 8.43–9.64 8.59–9.55 B11.5 9.65–10.4 9.56–10.2 B12.8 10.5–11.2 10.3–10.9 B14.0 11.3–12.3 11.0–11.9 B15.5 12.4–13.7 12.0–13.1 B17.5 13.8–14.8 13.2–14.0 B19.5 14.9–16.5 14.1–14.8 B22.0 16.6–18.7 14.9–17.0 B25.0 18.8–21.4 17.1–19.6 B28.0 21.5–24.3 19.7–22.1 B32.0 24.4–28.0 22.2–26.0 B36.0 28.1–33.3 26.1–29.4 B40.0 33.4–37.6 29.5–34.0 B45.0 37.7–41.1 34.1–36.4 B50.0 41.2–44.1 36.5–39.2 B56.0 44.2–47.8 39.3–42.4 B62.0 47.9–50.0 42.5–49.3 B70.0 — 49.4–50.0 B79.0 For Type DPSO52 & DPSO53, 50 Ampere Starter. Select any of the Thermal Units from above. Table 149 Max. Fuse Rating (Amp) 14.6–15.5 CC20.9 30 15.6–16.6 CC22.8 35 16.7–18.5 CC24.6 35 18.6–20.1 CC26.3 40 20.2–21.8 CC28.8 45 21.9–23.6 CC31.0 45 23.7–25.1 CC33.3 50 25.2–27.2 CC36.4 50 27.3–29.2 CC39.6 60 29.3–31.4 CC42.7 60 31.5–33.8 CC46.6 70 33.9–36.5 CC50.1 70 36.6–39.1 CC54.5 80 39.2–42.3 CC59.4 80 42.4–44.9 CC64.3 90 45.0–50.6 CC68.5 100 50.7–51.9 CC74.6 100 52.0–56.1 CC81.5 100 56.2–60.7 CC87.7 100 60.8–64.1 CC94.0 100 64.2–69.5 CC103.0 100 69.6–73.6 CC112.0 100 73.7–76.7 CC121.0 100 76.8–81.6 CC132.0 100 81.7–84.6 CC143.0 100 84.7–88.0 CC156.0 110 88.1–90.0 CC167.0 110 For Type DPSO60 to 90 Ampere Starter. Select any of the Thermal Units from above. Motor FLC (A) Thermal Unit Max. Fuse Rating (Amp) 14.6–15.3 CC20.9 30 15.4–16.2 CC22.8 30 16.3–18.0 CC24.6 35 18.1–19.5 CC26.3 40 19.6–21.0 CC28.8 40 21.1–23.0 CC31.0 45 23.1–24.2 CC33.3 50 24.3–26.0 CC36.4 50 26.1–27.9 CC39.6 50 28.0–29.9 CC42.7 60 30.0–32.6 CC46.6 60 32.7–34.6 CC50.1 70 34.7–36.5 CC54.5 70 36.6–40.0 CC59.4 80 40.1–42.4 CC64.3 90 42.5–48.1 CC68.5 90 48.2–48.6 CC74.6 100 48.7–52.6 CC81.5 100 52.7–56.5 CC87.7 100 56.6–59.5 CC94.0 100 59.6–64.4 CC103.0 100 64.5–67.4 CC112.0 100 67.5–69.6 CC121.0 100 69.7–74.2 CC132.0 100 74.3–78.0 CC143.0 100 78.1–82.1 CC156.0 100 82.2–87.5 CC167.0 110 87.6–90.0 CC180.0 110 For Type DPSG60 to 90 Ampere Starter. Select any of the Thermal Units from above. Motor FLC (A) Thermal Unit 16 NEMA DEFINITE PURPOSE TYPE CONTACTORS AND STARTERS 16-148 Index and Instructions: pages 16-125—16-129 © 2009 Schneider Electric All Rights Reserved Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2009:03:04 15:07:16-06:00 Modify Date : 2009:07:21 12:09:10-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Instance ID : uuid:9fe477f0-2078-fe48-8f14-fb108cd465ac Document ID : adobe:docid:indd:b9f34800-0a58-11de-94b9-c9f90b55436d Rendition Class : proof:pdf Derived From Instance ID : d77ef6d0-0342-11de-8b2d-ac93865527c8 Derived From Document ID : adobe:docid:indd:59304f5e-032f-11de-8b2d-ac93865527c8 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:96E6D313E0F8DD1193D3A206EA549064, uuid:5B665946E0F8DD1193D3A206EA549064, uuid:4FF6EF6A225911DD91B6E1D8435B5599, uuid:4FF6EF6A225911DD91B6E1D8435B5599 Manifest Reference Document ID : uuid:96CC0F152BCCDD11A7E9FDD05B4D97A8, uuid:4480D645750C11DDA036ECEE5BB6739C, uuid:4FF6EF69225911DD91B6E1D8435B5599, uuid:4FF6EF69225911DD91B6E1D8435B5599 Metadata Date : 2009:07:21 12:09:10-07:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10674 bytes, use -b option to extract) Format : application/pdf Title : Schneider Electric DIGEST 175 - NEMA Definite Purpose Type Contactors and Starters Creator : Producer : Adobe PDF Library 8.0 Trapped : False Page Layout : SinglePage Page Mode : UseOutlines Page Count : 148EXIF Metadata provided by EXIF.tools