Unknown 136575 Catalog
108131-Catalog 108131-Catalog 108131-Catalog Batch9 unilog cesco-content
129194-Catalog 129194-Catalog 129194-Catalog Batch9 unilog cesco-content
129246-Catalog 129246-Catalog 129246-Catalog Batch9 unilog cesco-content
129247-Catalog 129247-Catalog 129247-Catalog Batch9 unilog cesco-content
131038-Catalog 1 131038-Catalog_1 131038-Catalog_1 Batch9 unilog cesco-content
2014-10-23
: Pdf 136575-Catalog 136575-Catalog Batch9 unilog
Open the PDF directly: View PDF 
.
Page Count: 282
| Download | |
| Open PDF In Browser | View PDF |
®
IDEAL Full-Line Catalog
You know the craft inside and out.
You’re never finished with the job
until it meets your standards.
You take pride in the way you go
about day-to-day business, and
that means only using equipment
that can hold up its end of the
bargain. We understand that kind
of pride. Every day IDEAL considers
the needs of electricians and the
result is a line of products worthy
of a professional.
TM
The tools and instruments you use
say a lot about the quality of work
you do. You know what it takes to
succeed in today’s modern electrical
world and IDEAL fills those needs
with high-quality, innovative
solutions. We realize there’s a bond
between a professional and his
equipment that can’t be broken by
the latest gimmick. That’s why this
catalog is filled with thoughtfully
designed products you can depend
on for years.
Every IDEAL product is designed
to deliver superior performance.
That means they’re built to be
easy-to-use, they’re built to last
and, most importantly, they’re built
with your safety in mind. One day,
one job at a time, IDEAL products
are there to help you perform at
the highest level.
Twist-On Wire Connectors . . . . . . . . . . . . . . . . . . .A-2
Wire Connector Accessories . . . . . . . . . . . . . . . . .A-10
Push-In Wire Connectors . . . . . . . . . . . . . . . . . . . .A-12
Grounding Connectors . . . . . . . . . . . . . . . . . . . . . .A-14
Crimp Terminals & Splices . . . . . . . . . . . . . . . . . . .A-16
Terminal Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-23
Crimp Connectors & Insulators . . . . . . . . . . . . . . .A-27
Set-Screw Wire Connectors . . . . . . . . . . . . . . . . .A-28
Mechanical Lugs . . . . . . . . . . . . . . . . . . . . . . . . . . .A-29
BUCHANAN Wire Connectors . . . . . . . . . . . . . . .A-36
BUCHANAN Streetlight Kits . . . . . . . . . . . . . . . . .A-40
BUCHANAN Terminal Blocks . . . . . . . . . . . . . . . .A-44
Wire Installation
Fish Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2
Fish Tape Accessories . . . . . . . . . . . . . . . . . . . . . .B-6
Fishing Poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7
Wire Pulling Lubricants . . . . . . . . . . . . . . . . . . . . .B-8
Wire Pulling Lubricant Accessories . . . . . . . . . . .B-12
Conduit Benders . . . . . . . . . . . . . . . . . . . . . . . . . . .B-13
Pulling Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-15
Tools and Totes
Wire Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-2
Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-16
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-24
Cable Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-30
Crimp Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-31
Miscellaneous Hand Tools . . . . . . . . . . . . . . . . . . .C-32
Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-34
Tool Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-38
Insulated Hand Tools . . . . . . . . . . . . . . . . . . . . . . .C-42
Cutting & Holemaking Tools . . . . . . . . . . . . . . . . .C-46
Wire Management
Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-2
Cable Staples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-10
Heat Shrink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-12
Heat Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-15
Wire Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-16
Lockout/Tagout Products . . . . . . . . . . . . . . . . . . . .D-19
Safety Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-42
Test and Measurement
Digital Multimeters . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Clamp Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-10
Ground Resistance Meters . . . . . . . . . . . . . . . . . . E-18
Insulation & Earth Testers . . . . . . . . . . . . . . . . . . . E-19
Power Quality Meters . . . . . . . . . . . . . . . . . . . . . . . E-20
Circuit Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . E-23
Circuit Identifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . E-24
Receptacle Testers . . . . . . . . . . . . . . . . . . . . . . . . . E-25
Voltage/Continuity Testers . . . . . . . . . . . . . . . . . . . E-26
Electrical Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
Specialty Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31
DataComm Equipment
Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2
Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10
Crimp Tools & Die Sets . . . . . . . . . . . . . . . . . . . . . F-13
Compression Tools & Connectors . . . . . . . . . . . . . F-15
Tool & Connector Kits . . . . . . . . . . . . . . . . . . . . . . . F-17
Fiber Optic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . F-26
Supplies
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-2
Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-11
Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-12
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-13
Commutator Maintenance . . . . . . . . . . . . . . . . . . .G-17
A
B
C
D
E
F
G
Table of Contents
Wire Termination
Connectors designed for every application
Wire-Nut ® Wire Connectors
The original twist-on wire connector features a positive-grip design
for easy installation. Five color-coded models cover hundreds of wire
combinations from 22 through 8 AWG. The fixed square-wire spring
provides a secure connection that won’t relax over time.
Wing-Nut ® Wire Connectors
The next step in IDEAL wire connector innovation. Three models
accommodate a wide range of circuit and fixture wiring combinations
from 18 through 6 AWG. Built-in, contoured wings provide extra leverage
on maximum wire combinations. And the live-action spring expands to
accept a broader range of wire shapes and sizes.
Twister ® Wire Connectors
The industry’s premier wire connector. Just two models accommodate the
majority of common wiring configurations from 22 through 6 AWG. The
ribbed cap provides a secure grip and swept wings offer extra leverage.
A patented square-wire spring provides safe, secure connections.
Twister ® Al/Cu Wire Connectors
The only aluminum-to-copper twist-on wire connector. Specially
formulated compound reduces corrosion build-up on aluminum
conductors for better conductivity and cooler connections. UL
Listed and CSA Certified for aluminum-to-copper connections.
Twister ® DB Plus™ Wire Connectors
The smallest wet location/direct burial wire connector. Offers the
widest range of wire combinations from 20 through 12 AWG. Features
non-hardening sealant to ensure safe and moisture-free connections.
UL Listed and CSA Certified for underground and wet locations.
B-CAP ®
Contoured Classic Fins™ provide a secure grip for extra torque. Three
models cover a full range of wire sizes from 22 through 6 AWG. The
square-wire spring locks onto conductor for fast, secure connections.
Compact size allows easy handling and installation.
Wire Termination
A
Wire-Nut® Wire Connectors
■ Five color-coded models cover a full
range of wire sizes from 22 - 8 AWG
■ Fixed, square-wire spring creates its
own threads — maintains a secure
positive grip that will not relax over
time
■ No pre-twisting required — positive grip
design provides fast, easy installation
■ Reusable for easy circuit changes and additions
Positive-grip
design
■ Tough, UL94V-2 flame-retardant shell rated at 105oC (221oF)
■ UL Listed to 486C and CSA certified to C22.2 #188; comply with Federal
Specification W-S-610E
■ Classified in accordance with IEC Publications 998-2 and 998-2-4
Dimensions
Model
71B®
72B®
73B®
74B®
76B®
(Inches
mm )
A
11/64
4.5
11/64
4.5
11/64
4.5
17/64
7
9/32
7
B
C
D
E
1/4
6.5
21/64
8
11/64
4.5
37/64
15
5/16
8
11/32
9
25/64
10
7/16
11
3/16
5
11/32
9
45/64
18
55/64
22
7/16
11
1/2
13
35/64
14
19/32
15
5/16
8
3/8
10
61/64
24
1-1/16
27
Tough, durable
thermoplastic shell
Long, fully seated
square-wire spring
Threaded
entry
Deep skirt,
wide throat
Wire Combination
Range
Wire Combination
Range (mm)
Gray
300V
22 to 16 AWG
Min. 2 #22 – Max. 2 #16
300V
,34mm2 to 1,5mm2
Min. 2-,34mm2 Max. 3-1,5mm2
72B®
Blue
300V
22 to 14 AWG
Min. 2 #22 – Max. 3 #16
300V
,34mm2 to 2,5mm2
Min. 2-,34mm2 Max. 3-1,5mm2
73B®
Orange
600V*
22 to 14 AWG
Min. 1 #18 & 1 #20
Max. 4 #16 & 1 #20
600V*
,34mm2 to 2,5mm2
Min. 1-,75mm2 w/1-,50mm2
Max. 4-1,5mm2 w/1-,50mm2
Yellow
600V*
18 to 12 AWG
Min. 2 #18
Max. 4 #14 & 1 #18
600V*
,75mm2 to 4,0mm2
Min. 2-,75mm2
Max. 4-2,5mm2 w/1-,75mm2
600V*
18 to 10 AWG
Min. 2 #14
Max. 2 #10 & 2 #12
600V*
,75mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 2-6,0mm2 w/2-4,0mm2
Model
Color
71B®
74B
®
76B®
Red
Quantity
Cat. No.
Box of 100
Carton of 1,000
Keg of 25,000 (loose pack)
Barrel of 150,000
Box of 100
Carton of 1,000
Keg of 10,000 (loose pack)
Barrel of 85,000
Box of 100
Jar of 300
Carton of 1,000
Keg of 10,000 (20 bags, 500 ea.)
Keg of 10,000 (loose pack)
Barrel of 50,000
Box of 100
Jar of 175
Carton of 1,000
Keg of 5,000 (10 bags, 500 ea.)
Keg of 10,000 (loose pack)
Barrel of 35,000
Box of 100
Carton of 1,000
Keg of 5,000 (20 bags, 250 ea.)
Barrel of 15,000
30-071
30-171
30-271
30-871
30-072
30-172
30-272
30-872
30-073
30-073J
30-173
30-273
30-673
30-873
30-074
30-074J
30-174
30-274
30-674
30-874
30-076
30-176
30-276
30-876
C
A-2
www.idealindustries.com
UL
R
N
CO N
IR
-W E
*1,000V maximum in fixtures and signs
TE
LIS D
Wire Connectors
■ Deep, wide skirt helps protect against flash-over and turned-back strands
for maximum dielectric protection
US
EN 60-998-2-4
1-800-435-0705 for Customer Service
Wire Termination
High Temperature Wire-Nut® Wire Connectors
All of the Wire-Nut® Wire Connector features plus:
■ Black, thermoplastic shell specially designed to withstand the
extreme heat build-up commonly found in high-wattage light
fixtures and signs. UL Listed to 150°C (302°F)
Color
71B®
Black
72B®
73B®
59B™
Black
Black
Black
Wire Combination
Range
Wire Combination
Range (mm)
300V
22 to 16 AWG
Min. 2 #22 Str
Max. 2 #16
300V
,34mm2 to 1,5mm2
Min. 2-,34mm2
Max. 2-1,5mm2
300V
22 to 14 AWG
Min. 2 #22
Max. 3 #16
300V
,34mm2 to 2,5mm2
Min. 2-,34mm2
Max. 3-1,5mm2
600V*
22 to 14 AWG
Min. 1 #18 w/1 #20
Max. 4 #16 & 1 #20
600V*
,34mm2 to 2,5mm2
Min. 1-,75mm2 w/1-,50mm2
Max. 4-1,5mm2 w/1-,50mm2
600V*
22 to 12 AWG
Min. 2 #20
Max. 3 #14
600V*
,34mm2 to 4,0mm2
Min. 2-,5mm2
Max. 3-2,5mm2
Quantity
Cat. No.
Carton of 1,000
30-151
Keg of 25,000 (loose pack)
30-251
Carton of 1,000
30-152
Keg of 10,000 (loose pack)
30-252
Carton of 1,000
30-153
Keg of 10,000 (loose pack)
30-253
Box of 100
30-059
Carton of 1,000
30-159
Keg of 5,000 (loose pack)
30-259
*1,000V maximum in fixtures and signs
C
Dimensions
R
US
Inches
mm
(
)
Model
A
B
C
D
E
71B
Black
5/32
4
1/4
6.5
21/64
8
13/64
5
37/64
15
72B®
Black
13/64
5
5/16
8
25/64
10
15/64
6
45/64
18
73B®
Black
13/64
5
23/64
9
7/16
11
3/8
9.5
55/64
22
59BTM
Black
13/64
5
13/32
10
31/64
12
37/64
14.5
1-1/16
27
®
UL
N
CO N
IR
-W E
TE
LIS D
Model
1-800-435-0705 for Customer Service
www.idealindustries.com
A-3
Wire Connectors
■ Four models to cover wire ranges from 22 through 12 AWG
Wing-Nut® Wire Connectors
■ Three color-coded models cover a full range of wire sizes
from 18 through 6 AWG
■ Specially designed contoured wings provide a
secure grip for extra leverage on maximum wire
combinations
■ Live-action spring expands to accept wire shape
and size with no pre-twisting required
■ Deep skirt helps protect against flash-over and turned-back
strands for maximum dielectric protection
Tough, durable
thermoplastic shell
■ Easily removed for repeat usage on same size or larger wire
combinations
Live-action,
square-wire spring
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
■ UL Listed to 486C and CSA Certified to C22.2 #188; comply
with Federal Specification W-S-610E
Deep skirt,
wide throat
■ Classified in accordance with IEC Publications 998-2 and
998-2-4
Dimensions Inches
mm
(
Model
Comfortable
contoured wings
)
Model
A
B
C
D
E
451®
15/64
6
11/32
9
11/16
18
5/16
8
1-1/64
26
452®
21/64
8.5
15/32
12
15/16
24
5/16
8
1-15/64
31.5
454®
7/16
11
5/8
16
1-3/16
30
13/32
10.5
1-15/32
37.5
92®
21/64
8.5
13/32
10.5
29/32
23
9/32
10
1-5/32
30
Wire Combination
Range
Color
Wire Combination
Range (mm)
451®
Yellow
600V*
18 thru 10 AWG
Min. 2 #18
Max. 3 #12
452®
Red
600V*
18 thru 8 AWG
Min. 2 #18
Max. 4 #10
600V*
,75mm2 to 10,0mm2
Min. 2-,75mm2
Max. 4-6,0mm2
Blue
600V*
14 thru 6 AWG
Min. 3 #12
Max. 1 #6 & 2 #8
600V*
2,5mm2 to 16,0mm2
Min. 3-4,0mm2
Max. 2-16,0mm2 w/1-4,0mm2
454
®
600V*
,75mm2 to 6,0mm2
Min. 2-,75mm2
Max. 3-4,0mm2
Quantity
Cat. No.
Box of 100
Jar of 225
Jar of 500
Carton of 1,000
Keg of 5,000 (10 bags, 500 ea.)
Barrel of 35,000
Box of 100
Jar of 300
Jar of 500
Carton of 1,000
Keg of 5,000 (10 bags, 500 ea.)
Barrel of 25,000
30-451
30-451J
30-651J
30-551
30-651
30-851
30-452
30-452J
30-652J
30-552
30-652
30-852
Box of 50
30-454
Keg of 2,500 (25 bags, 100 ea.)
30-654
*1,000V maximum in fixtures and signs
C
Model
451 Yellow
452 Red
Min
2 #18
Min
2 #18
Max
4 #10
A-4
US
EN 60-998-2-4
Max
1 #6 & 2 #8
Min
3 #12
2 #18
R
Max
3 #12
454 Blue
Wire Combinations
UL
N
CO N
IR
-W E
TE
LIS D
Wire Connectors
■ Square-wire spring threads directly onto conductors
for fast, secure connections
2 #14
3 #12
www.idealindustries.com
5 #12
4 #10
5 #10
1-800-435-0705 for Customer Service
Wire Termination
Greenie® Grounding Connector
■ Designed for making ground connections and bonding
non-metallic sheathed cable
■ Contoured wings for maximum leverage
■ Live-action, square-wire spring provides superior
grounding connections
■ UL Listed to 467 and CSA Certified to C22.2 #188; complies
with Federal Specification W-S-610E
92®
Wire Combination
Range
14 thru 10 AWG
Min. 2 #14
Max. 3 #12 & 1 #14
Wire Combination
Range (mm)
2,5mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 3-4,0mm2 w/1-2,5mm2
Quantity
Cat. No.
Box of 100
30-092
Jar of 150
30-092J
Carton of 1,000
30-192
Keg of 5,000 (10 bags, 500 ea.)
30-292
UL
R
CON N
T
L IS E
- GN
D
D
.
Model
Greenie® Grounding Connector fully meets the intent of the
N.E.C. and specifically aids in compliance with the following:
ARTICLE 250: GROUNDING
250-146 Connecting Receptacle
Grounding Terminal to Box
250-148
Continuity and Attachment of
Equipment Grounding
Conductors to Boxes
(B) Grounding continuity
(D) Nonmetallic boxes
1-800-435-0705 for Customer Service
www.idealindustries.com
A-5
Wire Connectors
■ Tough, UL 94V-2 flame-retardant shell
Twister® Wire Connectors
■ Exceptional wire-range capacity — three models
handle wire combinations from as small as
22 AWG to as large as 6 AWG
■ Ribbed cap provides a secure
grip and fast fingertip starts
Tough, durable
thermoplastic
shell
■ Swept wings offer extra leverage
and less effort for large wire
combinations
Live-action,
square-wire
spring
■ Live-action, square-wire spring
locks onto wire for safe,
secure connections
■ Deep skirt helps protect against flash-over and turned-back
strands for maximum dielectric protection
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
■ UL Listed to 486C and CSA Certified to C22.2 #188; comply with
Federal Specification W-S-610E
■ Classified in accordance with IEC Publications 998-2 and 998-2-4
Model
Color
340®
Lt. Blue
341®
Tan
342®
Gray
Compact
swept wings
Deep,
threaded
skirt entry
Wire Combination
Range
Wire Combination
Range (mm)
600V*
22 thru 10 AWG
Min. 2 #22
Max. 3 #12
600V*
,34mm2 to 4,0mm2
Min. 2-,34mm2
Max. 3-4,0mm2
600V*
22 thru 8 AWG
Min. 3 #22
Max. 3 #10
600V*
,34mm2 to 10,0mm2
Min. 3-,34mm2
Max. 3-6,0mm2
600V*
18 thru 8 AWG
Min. 3 #14
Max. 2 #8 w/2 #12
600V*
,75mm2 to 10,0mm2
Min. 3-2,5mm2
Max. 2-10,0mm2 w/2-4,0mm2
*1,000V maximum in fixtures and signs
Cat. No.
Box of 100
Bag of 500
Jar of 500
Barrel of 35,000
Box of 50
Box of 100
Jar of 400
Jar of 750
Carton of 1,000
Keg of 5,000 (10 bags, 500 ea.)
Barrel of 25,000
Box of 25
30-340
30-640
30-640J
30-840
30-141
30-341
30-441J
30-341J
30-541
30-641
30-841
30-142
Box of 50
Keg of 2,500 (10 bags, 250 ea.)
30-342
30-642
2#22
1,280 (.65mm2)
3#22
1,920 (.97mm2)
3#14
12,330 (6.24mm2)
3 #12
19,590 (9.93mm2)
UL
R
N
CO N
C
Combination
Cir Mil Area
Quantity
IR
-W E
TE
LIS D
Wire Connectors
■ Hexagonal shape
accommodates standard
nutdriver for tool installation
US
3#10
31,140 (15.78mm2)
EN 60-998-2-4
2#12 w/2#8
46,080 (23mm2)
340®
341®
342®
Dimensions
Model
A
B
C
D
E
340
Lt. Blue
5/16
7.8
3/8
9.5
39/64
15.2
27/64
10.6
63/64
24.9
341®
Tan
17/64
7
29/64
11.5
23/32
18
23/64
9
1-1/8
28.5
342®
Gray
3/8
9.5
9/16
20
1.0
25.5
13/32
10.5
1-19/64
33
®
A-6
(Inches
mm )
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
®
Wire Connector
Wire Connectors
■ SureGrip™ overmolding
provides better
grip for improved
leverage and
more torque
■ Comfortable swept
wings designed to
help reduce hand
fatigue
■ Expanding square-wire
spring provides a secure
connection every time
Molded vertical
grooves provide
maximum grip
■ Better grip and more leverage
for faster connections with
less effort
Patented sweptwing SureGrip™
design
Exceptional wire range
and capacity
- Min. 2 #18
- Max. 4 #10
Color
344
Red/Gray
Wire Combination
Range
Wire Combination
Range (mm)
600V*
22 to 8 AWG
Min. 2 #18
Max. 4 #10
600V*
,34mm2 to 10,0mm2
Min. 2-,75mm2
Max. 4-6,0mm2
Quantity
Tube of 25
30-144J
Jar of 250
30-244J
Jar of 500
Min. 2 #18
4 #14
5 #12
UL
R
N
CO N
C
Dimensions
30-644J
IR
-W E
*1,000V maximum in fixtures and signs
Combination
344®
Cat. No.
TE
LIS D
Model
US
Max. 4 #10
(Inches
mm )
Model
A
B
C
D
E
344
Red/Gray
11/32
8.8
1/2
12.7
15/16
23.5
7/16
10.7
1-1/4
31.8
1-800-435-0705 for Customer Service
www.idealindustries.com
A-7
WeatherProof™ and UnderGround™ Wire Connectors
■ Silicone-based sealant protects against moisture
and corrosion
■ Easy to apply, pre-filled twist-on wire connectors
■ Handles wire sizes from #20 to #6 copper conductors
■ UL Listed to 486D for use in damp/wet locations
or direct burial
UnderGround™ — suitable for use in a wide variety of
direct burial and wet location electrical connections.
WeatherProof™ — suitable for interior and exterior electrical
connections exposed to rain or damp conditions.
Wire Connectors
WeatherProof™ Wire Connectors
Model
Color
61
Blue/Orange
62
Blue/Red
63
Blue/Dr. Blue
Wire Combination
Range
Wire Combination
Range (mm)
Quantity
Cat. No.
600V*
22 to 14 AWG
Min. 2 #20
Max. 2 #14
600V*
18 to 8 AWG
Min. 2 #18
Max. 3 #10
600V*
16 to 6 AWG
Min. 3 #14
Max. 2 #8 & 1 #10
600V*
,34mm2 to 4,0mm2
Min. 2-,5mm2
Max. 2-2,5mm2
600V*
,75mm2 to 10,0mm2
Min. 2-,75mm2
Max. 3-6,0mm2
600V*
1,5mm2 to 16,0mm2
Min. 3-2,5mm2
Max. 2-10,0mm2 w/1-6,0mm2
Card of 6
Card of 25
Box of 100
Box of 1,000
Card of 5
Card of 20
Box of 100
Box of 1,000
Card of 3
Card of 15
Box of 100
Box of 1,000 (yellow)
30-061
30-161
30-261
30-361
30-062
30-162
30-262
30-362
30-063
30-163
30-263
30-363
Wire Combination
Range
Wire Combination
Range (mm)
600V*
20 to 10 AWG
Min. 2 #20
Max. 1 #10 & 2 #12
600V*
,5mm2 to 6,0mm2
Min. 2-,5mm2
Max. 1-6,0mm2 w/2-4,0mm2
600V*
18 to 8 AWG
Min. 2 #18
Max. 3 #10
600V*
,75mm to 10,0mm2
Min. 2-,75mm2
Max. 3-6,0mm2
UnderGround™ Wire Connectors
60
Color
Blue/Blue
Yellow
64
Blue/Dk. Blue
Yellow
Quantity
Cat. No.
Card of 2
Card of 10
Box of 100
Box of 1,000
Box of 1,000 (yellow)
Card of 2
Card of 10
Box of 50
Box of 1,000
30-060
30-760
30-260
30-360
30-360Y
30-064
30-764
30-264
30-364
Box of 25 (yellow)
30-164Y
*1,000V maximum in fixtures and signs
Dimensions
Model
A-8
(Inches
mm )
A
B
C
C
D
E
61
3/16 (4,8) 5/16 (7,9)
21/32 (16,7) 13/32 (10,3) 29/32 (23,0)
62
9/32 (7,1) 1/2 (12,7)
15/16 (23,8) 19/32 (15,1) 1-11/32 (34,1)
63
3/8 (9,5) 19/32 (15,1) 1-1/16 (27,0) 23/32 (18,3) 1-19/32(40,5)
60
9/32 (7,1) 17/32 (13,5) 41/64 (16,2) 55/64 (22,0) 1-21/32 (42,0)
64
9/32 (7,1) 19/32 (15,1) 29/32 (23,0) 1-1/8 (28,6) 2-1/32 (51,6)
www.idealindustries.com
UL
R
N
CO N
IR
-W E
TE
LIS D
Model
US
WARNING:
1. One time use only. Do not reuse.
2. Wiring must comply with all applicable electrical codes.
3. For use on copper wire only. Do not use on aluminum wire.
4. Not for use in continuous submersion applications.
1-800-435-0705 for Customer Service
Wire Termination
Twister® AI/Cu Wire Connector
■ Only aluminum-to-copper twist-on connector specifically
designed to guarantee a secure connection while
preventing aluminum corrosion
■ Specially formulated corrosion- resistant
compound cuts and penetrates corrosion
build-up on aluminum conductors for increased
conductivity and cooler connections
■ Compact, one-piece design features ribbed cap, swept
wings and hexagonal head for easy installation by hand
or with standard nutdriver
Live-action,
square-wire
spring expands
and contracts
with aluminum wire
■ Live-action, square-wire spring expands and contracts with
aluminum wire
■ Deep skirt provides maximum dielectric strength
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Compound cuts
corrosion build-up
on aluminum
conductors
■ Complies with N.E.C. Section #110-14(b) for aluminum-to-copper
connections; UL Listed to 486C and CSA Certified to C22.2 #188;
complies with Federal Specification
W-S-610E
Entry cap retains
corrosion-resistant
compound
■ UL Listed to 467 for grounding and bonding
Color
65
Wire Combinations
1 #10 Al solid w/1 or 2 #10 Cu solid
1 #10 Al w/1 or 2 #12 Cu
2 #10 Al solid w/1 #12 Cu
1 #10 Al w/1 or 2 #14 Cu
2 #10 Al solid w/1 #14 Cu
2 #12 Al solid w/1 #10 Cu
1 #12 Al solid w/1 or 2 #10 Cu
1 #12 Al stranded w/1 or 2 #10 Cu solid
1 #12 Al w/1 or 2 #12 Cu
2 #12 Al solid w/1 #12 Cu
1 #12 Al w/1 or 2 #14 Cu
2 #12 Al solid w/1 #14 Cu
1 #10 Al w/1 or 2 #18 Cu
2 #10 Al solid w/1 #18 Cu
1 #12 Al w/1 or 2 #16 Cu
2 #12 Al solid w/1 #16 Cu
1 #10 Al w/1 or 2 #16 Cu
2 #10 Al solid w/1 #16 Cu
1 #12 Al w/1 or 2 #18 Cu
2 #12 Al solid w/1 #18 Cu
Purple
Quantity
Cat. No.
Card of 2
30-065
Card of 10
30-765
Card of 25
30-165
Box of 100
30-265
Carton of 1,000
30-365
600V maximum building wire; 1,000V signs or lighting fixtures
C
Dimensions
UL
R
N
CO N
IR
-W E
TE
LIS D
Model
US
Wire Connector
also listed as
grounding equipment
(Inches
mm )
Model
A
B
C
D
E
65
17/64
7
13/32
10.5
13/16
21
35/64
14
1-11/32
34
1-800-435-0705 for Customer Service
WARNING:
1. One time use only. Do not reuse connector.
2. Do not use on aluminum to aluminum wire combinations.
3. Wiring must comply with all applicable electrical codes.
4. Contact IDEAL for complete wire combination listing.
www.idealindustries.com
A-9
Wire Connectors
Ribbed cap for hand
or nutdriver
installation
Wire-Nut® Wire Connector Sockets
Wire-Nut® Wire Connector
Wrench/Screwdriver Combo
■ Speeds installation of Wire-Nut®
Wire Connectors
■ Speeds installation of Wire-Nut®
Wire Connectors
■ Fit any pneumatic or
electric tool
with a 1/4 in.
chuck or
drive socket
■ Slotted-tip screwdriver
with convenient
connector-wrench
socket in end of
insulated handle
Wire Connectors
For Connector Model
Cat. No.
71B , 71B Black, 72B & 72B Black
30-903
For Connector Model
Type
Cat. No.
73B® & 73B® Black
30-904
74B® & 76B®
Mechanic – 1/4 in. x 4 in.
30-331
30-905
74B® & 76B®
Electrician – 3/16 in. x 6 in.
30-333
®
®
®
®
59B™
74B , 76B & 59B™
®
30-906
®
Wire-Nut® Wire Connector Wrench
Nutmaster® Nutdrivers
■ Speeds installation of Wire-Nut®
Wire Connectors
■ Speeds installation of Twister®
Wire Connectors
■ Excellent leverage
helps reduce fatigue
■ Nickel/chrome plated to
resist rust and corrosion
■ Cushioned rubber grip
For Connector Model
Cat. No.
73B®, 74B® & 76B®
H-632
Spin-Twist® Wire Connector Socket
For Connector Model
Cat. No.
®
341
35-292
342®
35-295
Ratch Wrench
■ Speeds installation of IDEAL
and BUCHANAN Wire
Connectors
■ Speeds installation of
B-CAP® Wire Connectors
■ Either end accepts 1/4-in.
drive for tight-spot
wire splicing
■ For use with electric
corded or cordless
drill drivers
■ 1/4 in. chuck fits
most drills or drive sockets
For Connector Model
Cat. No.
Wire-Nut , Wing-Nut , Twister , B-CAP and WingTwist™
®
®
®
®
30-902
For Connector Model
Cat. No.
B1, B2 & B4
BR-5
Twist-a-Nut™
7-in-1 Screwdriver
High-Speed Wire Connector Chuck
■ Facilitate installation of
connectors
■ Cordless screwdriver adapter
for installing B-CAP®
Wire Connectors
■ Universal Wire-Nut®
Wrench in handle
■ Accepts most twist-on
connectors
Description
Cat. No.
For Connector Model
7-in-1 Twist-a-Nut™
35-908
B1, B2 & B4
A-10
www.idealindustries.com
Cat. No.
HSC-1
1-800-435-0705 for Customer Service
Wire Termination
Luminaire Disconnect
™
■ The first push-in disconnect to meet the new NEC and CEC code
changes for non-residential fluorescent luminaires
■ Perfect for OEM or retrofit lighting applications
■ Meets UL and CSA finger-probe safety requirements
Wire Connectors
3 Amp
Max.
ght
Pieces pull apart
safely and easily
l
y
Li
Luminair
or
e
F
■ Allows safe disconnect of hot and neutral ballast wiring
ing on
3/8” strip length
indicator
Thumb ridges provide
superior grip
Fits through 1/2”
knockout
Both halves pass UL 2459 &
CSA 182.3 finger probe
requirements
Patented IDEAL push-in
technology quickly
locks wires in place
Materials
Housings:
Contacts:
Nylon
Copper Alloy
Ratings
Temperature:
Flammability:
Current Interruption:
105°C (221°F)
UL 94V-0
10 Cycles
Max. Current Rating
120V
277V
347V
480V
600V
Patents Pending
3 Amps
1.3 Amps
1 Amps
0.75 Amps
0.60 Amps
Model
102
Color
Orange
Wire Range
Solid
Stranded
Stranded
(Tin-Bonded)
12 AWG – 18 AWG
12 AWG – 14 AWG (19 strand or less)
12 AWG (19 strand or less)
14 AWG (19 strand or less)
16 AWG (26 strand or less)
18 AWG (16 strand or less)
Agency Approvals
UL 2459
CSA 182.3
RoHS Compliant
Physical
Strip Length:
Number of Circuits:
Color:
Mating/Unmating Force:
3/8” ± 1/16”
2 (3 circuit coming soon)
Orange and White
3-8 Pounds
Wire Combination
Range
600V*
18 thru 12 AWG
Wire Combination
Range (mm)
600V*
,75mm2 to 24,0mm2
1.30
.81
.50
.82
HOLE
CLEARANCE
.137
Quantity
Cat. No.
Card of 25
Jar of 75
Jar of 150
Box of 1,000
30-372
30-382J
30-352J
30-102
*1,000V maximum in fixtures and signs
1-800-435-0705 for Customer Service
www.idealindustries.com
A-11
In-Sure™ Push-In Wire Connectors
■ No-twist connection reduces repetitive motion fatigue
■ Accepts the following copper wire sizes
■ Low insertion force for fast and easy connections
- Solid
#20 - #12 solid
■ Compact size makes installation easy
- Stranded
#16 - #14 (19 strand or less)
#18 (7 strand or less)
■ Clear shell gives visual verification of connection
■ UL Listed to 486C and CSA Certified to C22.2 #188
Wire Connectors
- Stranded (Tin Bonded)
#14 - #12 (19 strand or less)
#16 (26 strand or less)
#18 (16 strand or less)
■ UL 467 Listed for grounding and bonding applications
Model
84
Color
Red
Ports
2
Length
In. mm
.355
Width
In.
mm
9.02 .434
Height
In. mm
11.02 .729
18.52
85
Orange
3
.355
9.02 .591
15.01 .729
18.52
86
Yellow
4
.355
9.02 .748
18.99 .729
18.52
87
Gray
5
.355
9.02 .907
23.03 .729
18.52
88
Blue
90
Black
6 Stacked .607
8
.355
15.42 .603
15.32 .729
18.52
9.02 1.38
35.03 .717
18.21
COPPER TO COPPER ONLY. Do not use on aluminum.
Temperature rating: 105°C (221°F) maximum
600V maximum building wire, 1000V maximum signs or lighting fixtures
A-12
www.idealindustries.com
Quantity
Cat. No.
Box of 100
Jar of 300
Box of 1,000
Box of 5,000
Box of 100
Jar of 250
Box of 1,000
Box of 5,000
Box of 100
Jar of 200
Box of 1,000
Box of 4,000
Box of 50
Jar of 150
Box of 1,000
Box of 5,000
Box of 50
Jar of 100
Box of 1,000
Box of 5,000
Box of 50
Jar of 100
Box of 1,000
Box of 2,000
30-084
30-084J
30-184
30-684
30-085
30-085J
30-185
30-685
30-086
30-086J
30-186
30-686
30-087
30-087J
30-187
30-687
30-088
30-088J
30-188
30-688
30-090
30-090J
30-190
30-690
C
Installation as easy
as 1-2-3...
1.
Strip
2.
Push
3.
Connect
US
1-800-435-0705 for Customer Service
Wire Termination
Term-a-Nut® Pigtail Wire Connectors
■ Ultra-flexible 6-in. lead allows for easy positioning in outlet box — reduces stress on device, wires and connection
■ Wide range of wire combinations – #18 through #12 solid or stranded conductors
■ Brass adapter for strong, conductive transition from spring to lead wire
■ Brass-alloy terminals with locking tabs for fast, efficient device connection
■ UL 486A and UL 486C Listed and tested to CSA standard C22.2 #65 and C22.2 #188
Shell Color
Wire Color
Terminal End
Quantity
Cat. No.
Red
White
#10 fork
25
30-3170
Red
White
#10 fork
10
30-3370
Red
Black
#10 fork
25
30-3171
Red
Black
#10 fork
10
30-3371
Red
White
Stripped end
25
30-3172
Red
Black
Stripped end
25
30-3173
Green
Green
#10 fork
25
30-3180
Green
Green
#10 fork
10
30-3380
MultiPak*
White/Black/Green
#10 fork
9
30-3181
Wire Connectors
■ Wire Range: Red/Green Shell – Min. 2 #18 w/1 #14, Max. 4 #12
*Includes 3 red shells w/white wire, 3 red shells w/black wire,
and 3 green shells w/green wire.
C
Brass-alloy
terminal with
locking tabs
US
Ultraflexible
lead
Brass
adapter
Phosphorbronze spring
1-800-435-0705 for Customer Service
www.idealindustries.com
A-13
Grounding Connectors
■ Term-a-Nut® grounding connectors address specific
requirements for grounding to steel outlet boxes
and wiring multiple devices
■ UL Listed to UL486C and UL467 (grounding and
bonding)
Term-a-Nut® Grounding Connectors
Wire Connectors
Term-a-Nut® Grounding Connector, 12 AWG
stranded, 6 in. tail w/#10 fork
Term-a-Nut® Grounding Connector, 12 AWG
stranded, 6 in. tail w/#10 fork
Term-a-Nut® Grounding Connector, 12 AWG
stranded, 6 in. tail w/#10 fork
Term-a-Nut® Grounding Connector, 12 AWG
stranded, 6 in. tail w/#10 fork
Term-a-Nut® Grounding Connector, 12 AWG
stranded w/#10 ring & ground screw
Term-a-Nut® Grounding Connector, 12 AWG
stranded w/#10 ring & ground screw and 6 in.
jumper w/#10 fork
Quantity
Cat. No.
Fig.
Bag of 10
30-3380
A
Bag of 25
30-3180
A
Box of 100
30-3280
A
Box of 250
30-3680
A
Bag of 25
30-3182
B
Bag of 10
30-3386
C
Term-a-Nut® Grounding Connector
Term-a-Nut® Grounding Connector
Connects multiple grounding conductors to
a device.
Bonds the box to the grounding
conductors.
Thread-forming
grounding screw
Ultra-flexible
lead wire
Fig. B
Heavy-duty
brass terminal
Fig. A
Heavy-duty
brass terminal
Twist-on wire
connector
Twist-on wire
connector
Term-a-Nut® Grounding Connector
Connects grounding conductors to a
device’s grounding screw, connects
grounding conductors to the mounting box
and bonds the device to the box.
Ultra-flexible lead wire
Combo hex head
Twist-on wire
connector
Stranded bonding jumper
Heavy-duty brass terminal
Fig. C
A-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Grounding Accessories
■ Solid and stranded pigtail lead wires are convenient for stranded device grounding applications
■ Grounding screws offer a unique thread-forming feature, plus combination hex, Phillips, slotted and Robertson tip
Ultra-flexible
lead wire
Grounding Tails - Solid Wire
Heavy-duty
brass terminal
Fig. A
Fig. B - 8 in. length
Fig. C - 10 in. length
Fig. A - #14 AWG
Fig. B - #12 AWG
Solid Wire Grounding Tails
14 AWG solid, 8 in. tail w/loop & ground
screw and stripped end
12 AWG solid, 8 in. tail w/loop & ground
screw and stripped end
12 AWG solid, 8 in. tail w/loop & ground
screw and stripped end
12 AWG solid, 10 in. tail w/loop & ground
screw and stripped end
Fig. C
Fig. D
Quantity
Cat. No.
Fig.
Box of 50
30-3390
A
Box of 50
30-3392
B
Bundle of 50
30-3496
B
Bundle of 50
30-3394
C
Grounding Accessories
Combo hex head
Thread-forming
grounding screw
Fig. A
Fig. B
Miscellaneous Grounding Products
Fig. E
Stranded Wire Grounding Tails
Quantity
14 AWG stranded 7-3/4 in. tail w/#10 fork &
Bag of 25
10 ring and ground screw
12 AWG stranded, 7-3/4 in. tail w/#10 fork &
Bag of 25
10 ring and ground screw
12 AWG stranded, 7-3/4 in. tail w/#10 fork &
Bundle of 100
10 ring and ground screw
12 AWG stranded, 2-wire tail joined w/#10 ring
and ground screw, one stripped-end tail and one Bag of 25
10 fork tail
12 AWG stranded, 2-wire tail joined w/#10 ring
Bag of 25
and ground screw and two #10 fork tails
12 AWG stranded, 3-wire tail joined w/#10 ring
and ground screw, one stripped-end tail and two
Bag of 25
10 fork tails
1-800-435-0705 for Customer Service
Cat. No.
Fig.
30-3183
A
30-3184
B
30-3284
B
30-3287
C
30-3288
D
30-3289
E
Ground Screw, thread-forming, combination
hex, Phillips, slotted and Robertson-tip
Ground Screw, thread-forming, combination
hex, Phillips, slotted and Robertson-tip
Grounding clip – accepts 10, 12 or
14 AWG wire
Quantity
Cat. No.
Fig.
Pack of 50
30-3194
A
Bag of 100
30-3294
A
Pack of 100
30-3395
B
www.idealindustries.com
A-15
Wire Connectors
Grounding Tails - Stranded Wire
Term-a-Nut® Terminal Wire Connectors
High-quality
brass terminal
with locking tabs
■ No tools required – installs quickly without crimping – easily
removed for quick changes
■ Use with single or multiple wires – solid and/or stranded
22 to 12 AWG
■ Highly conductive brass terminal and phosphor-bronze spring
for maximum conductivity and smooth performance
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Phosphor-bronze
spring
Wire Connectors
■ UL 486A and UL 486C Listed and tested to CSA C22.2 #65
and C22.2 #188
Terminal Configurations
Qty./Clamshell
Cat. No.
#10 fork
25
30-3004
#8 fork
25
30-3014
.250 in. disconnect
25
30-3006
#10 ring
25
30-3012
#8 ring
25
30-3010
40/kit*
30-3901
Assortment
*Kit contains 8 each: 30-3004, 30-3014, 30-3006, 30-3012 and 30-3010.
C
US
Crimp Terminals-Rings, Forks, Disconnects and Splices
■ Butted seam-construction prevents splitting under maximum
pressure
■ Shouldered barrel insulation quickly positions terminal for
proper crimping
■ Internal barrel serrations grip wires tightly to resist pull-out and
reduce electrical resistance
■ Expanded insulation entry accomodates a wide variety of
insulation diameters and provides additional insulation support
■ Tin-plated brass construction for corrosion resistance
■ Color-coded insulation and wire range stamped on terminal for
easy identification
W
Vinyl Insulated Ring Terminals
Max.
Max.
Stud
Stud
Wire
Wire
Size
Size Ins. Dia. Ins. Dia.
(Inches) (mm) (Inches) (mm)
Wire
Range
(AWG)
Wire
Range
(mm2)
22 – 18
0.5 – 1.0
6
8
10
1/4
3.7
4.3
5.3
6.4
.157
16 – 14
1.5 – 2.5
6
8
10
1/4
3.7
4.3
5.3
6.4
.177
4.0 – 6.0
8
10
1/4
5/16
3/8
4.3
5.3
6.4
8.4
10.5
12 – 10
.248
F
Dimensions
(Inches)
Dimensions
(mm)
L
W
E
F
L
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
4.0
.764
.819
.819
1.055
.260
.315
.315
.457
.394
.394
.394
.394
.248
.276
.276
.433
19.4
20.8
20.8
26.8
6.6
8.0
8.0
11.6
10.0
10.0
10.0
10.0
6.3
7.0
7.0
11.0
25
25
25
25
83-2121
83-2131
83-2141
83-2151
—
—
—
—
—
—
—
—
4.5
.764
.858
.858
1.055
.260
.335
.374
.472
.394
.394
.394
.394
.248
.307
.287
.433
19.4
21.8
21.8
26.8
6.6
8.5
9.5
12.0
10.0
10.0
10.0
10.0
6.3
7.8
7.3
11.0
25
25
25
25
83-2221
83-2231
83-2241
83-2251
—
—
1,000
—
—
—
84-2241
—
6.3
1.047
1.047
1.167
1.339
1.339
.374
.374
.472
.591
.591
.512
.512
.512
.512
.512
.358
.358
.413
.531
.531
26.6
26.6
29.5
34.0
34.0
9.5
9.5
12.0
15.0
15.0
13.0
13.0
13.0
13.0
13.0
9.1
9.1
10.5
13.5
13.5
25
25
25
25
25
83-2331
83-2341
83-2351
83-2361
83-2371
—
1,000
—
—
—
—
84-2341
—
—
—
75° C/600 Volts max.
A-16
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Dimensions
(Inches)*
W
E
Wire
Range
(AWG)
Wire
Range
(mm2)
Stud
Size
(Inches)
Stud
Size
(mm)
L
22 – 18
0.5 – 1.0
8
10
4.3
5.3
.622
.622
.315
.315
16 – 14
1.5 – 2.5
6
8
10
3.7
4.3
5.3
.567
.661
.661
12 – 10
4.0 – 6.0
8
10
1/4
4.3
5.3
6.4
8.0
10
1/4
5/16
3/8
6
4
8
Dimensions
(mm)**
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
4.8
4.8
7.0
7.0
25
25
83-0131
83-0141
—
—
—
—
6.6
8.5
9.5
4.8
4.8
4.8
6.3
7.8
7.3
25
25
25
83-0221
83-0231
83-0241
—
—
1,000
—
—
84-0241
19.6
19.6
22.5
9.5
9.5
12.0
6.0
6.0
6.0
9.1
9.1
10.5
25
25
25
83-0331
83-0341
83-0351
—
1,000
—
—
84-0341
—
.366
.366
.543
.543
23.8
23.8
29.8
29.8
12.0
12.0
15.0
15.0
8.5
8.5
8.5
8.5
9.3
9.3
13.8
13.8
25
25
25
25
83-0421
83-0431
83-0441
83-0451
—
—
—
—
—
—
—
—
.413
.413
.413
.413
.524
.524
.559
.559
29.8
29.8
32.5
32.5
12.0
12.0
16.0
16.0
10.5
10.5
10.5
10.5
13.3
13.3
14.2
14.2
20
20
20
20
83-0511
83-0521
83-0531
83-0541
—
—
—
—
—
—
—
—
.472
.472
.472
.531
.531
.531
33.5
33.5
33.5
16.5
16.5
16.5
12.0
12.0
12.0
13.5
13.5
13.5
20
20
20
83-0611
83-0621
83-0631
—
—
—
—
—
—
F
L
.189
.189
.276
.276
15.8
15.8
8,0
8.0
.260
.335
.374
.189
.189
.189
.248
.307
.287
14.4
16.8
16.8
.772
.772
.886
.374
.374
.472
.236
.236
.236
.358
.358
.413
5.3
6.4
8.4
10.5
.937
.937
1.161
1.161
.472
.472
.591
.591
.337
.337
.337
.337
14.0
10
1/4
5/16
3/8
5.3
6.4
8.4
10.5
1.173
1.173
1.280
1.280
.472
.472
.630
.630
22.0
1/4
5/16
3/8
6.4
8.4
10.5
1.319
1.319
1.319
.650
.650
.650
105°C/600 Volts max.
*Plus or minus .020 in.
**Plus or minus .50 in.
Vinyl Insulated Spade Terminals
Max.
Max.
Stud
Stud
Wire
Wire
Size
Size Ins. Dia. Ins. Dia.
(Inches) (mm) (Inches) (mm)
Dimensions
(Inches)
W
E
Wire
Range
(AWG)
Wire
Range
(mm2)
22 – 18
0.5 – 1.0
6
8
10
3.7
4.3
5.3
.157
4.0
.827
.827
.827
.252
.283
.374
16 – 14
1.5 – 2.5
6
8
10
3.7
4.3
5.3
.177
4.5
.827
.827
.827
12 – 10
4.0 – 6.0
6
8
10
1/4
3.7
4.3
5.3
6.4
.248
6.3
1.004
1.004
1.004
1.240
L
Dimensions
(mm)
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7111
83-7121
83-7131
1,000
—
—
84-7111
—
—
6.0
7.2
9.3
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7151
83-7161
83-7171
—
1,000
1,000
—
84-7161
84-7171
8.3
9.0
9.0
12.0
13.0
13.0
13.0
13.0
7.0
7.0
7.0
12.0
25
25
25
25
83-7201
83-7211
83-7221
83-7231
—
—
500
—
—
—
84-7221
—
F
L
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
6.4
7.2
9.5
.236
.283
.366
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
.327
.283
.283
.472
.512
.512
.512
.512
.276
.357
.354
.472
25.5
25.5
25.5
31.5
75° C/600 Volts max.
Crimp Tools
#30-518 Tool w/die
#30-519 Replacement die
#83-005
#88-843
Insulated and Non-Insulated Terminals, Splices and Disconnects (#22 - #10 AWG) are UL Listed when used with IDEAL Crimp Tool #30-518 (Replacement Die #30-519).
Non-Insulated Ring Terminals (#8 - #4 AWG) are UL Listed when used with IDEAL Crimp Tool #83-005 or 88-843.
Non-Insulated Disconnects, Splices and Vinyl Insulated Parallel Splices (#22 - #10 AWG) are not UL Listed; recommended IDEAL Crimp Tool #30-518.
Non-Insulated Splices (#8 - #4 AWG) are not UL Listed, recommended IDEAL Crimp Tool #83-005 or #88-843.
1-800-435-0705 for Customer Service
www.idealindustries.com
A-17
Crimp Terminals
Non-Insulated Ring Terminals
Vinyl Insulated Snap Spade Terminals
Wire
Range
(AWG)
Max.
Max.
Wire
Stud
Stud
Wire
Wire
Wire Range
Size
Size Ins. Dia. Ins. Dia.
(mm2)
(Inches) (mm) (Inches)
(mm)
Dimensions
(Inches)
Dimensions
(mm)
L
W
E
F
L
W
E
F
Ctn.
Qty.
Cat. No.
Crimp Terminals
22 – 18
0.5 – 1.0
6
8
10
3.7
4.3
5.3
.134
4.0
.827
.827
.827
.252
.283
.319
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
6.4
7.2
8.1
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7011
83-7021
83-7031
16 – 14
1.5 – 2.5
6
8
10
3.7
4.3
5.3
.161
4.5
.827
.827
.827
.236
.319
.319
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
6.0
8.1
8.1
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7051
83-7061
83-7071
12 – 10
4.0 – 6.0
8
10
1/4
4.3
5.3
6.4
.248
6.3
.992
.992
1.240
.327
.354
.472
.512
.512
.512
.276
.276
.472
25.2
25.2
31.5
8.3
9.0
12.0
13.0
13.0
13.0
7.0
7.0
12.0
25
25
25
83-7081
83-7091
83-7101
75° C/600 Volts max.
Non-Insulated Spade Terminals
Stud Size
(mm)
Dimensions
(Inches)
W
E
Wire Range
(AWG)
Wire Range
(mm2)
Stud Size
(Inches)
22 – 18
0.5 - 1.0
6
8
10
3.7
4.3
5.3
.630
.630
.630
.252
.283
.319
16 – 14
1.5 – 2.5
8
10
4.3
5.3
.630
.630
12 – 10
4.0 – 6.0
8
10
1/4
4.3
5.3
6.4
.728
.728
.965
L
Dimensions
(mm)
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
4.8
4.8
4.8
6.5
6.5
6.5
25
25
25
83-6111
83-6121
83-6131
—
—
—
—
7.2
9.3
4.8
4.8
6.5
6.5
25
25
83-6161
83-6171
—
1,000
—
84-6171
9.0
9.0
12.0
6.0
6.0
6.0
7.0
7.0
12.0
25
25
25
83-6211
83-6221
83-6231
—
—
—
—
—
—
F1
Ctn.
Qty.
Cat.
No.
F
L
.189
.189
.189
.256
.256
.256
16.0
16.0
16.0
6.4
7.2
8.1
.283
.366
.189
.189
.256
.256
16.0
16.0
.354
.354
.472
.236
.236
.236
.276
.276
.472
18.5
18.5
24.5
105° C/600 Volts max.
Vinyl Insulated Multi-Stack Disconnects
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
Max.
Wire
Ins. Dia.
(Inches)
Max.
Wire
Ins. Dia.
(mm)
22 – 18
0.5 – 1.0
.250 x .032
6.35 x 0.8
.150
3.8
.886 .413 .260 .315 .250 .323
22.5 10.5
6.6
8.0 6.35
8.2
25
83-9611
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.185
4.7
.886 .413 .260 .315 .250 .323
22.5 10.5
6.6
8.0 6.35
8.2
25
83-9621
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.244
6.2
.945 .512 .260 .315 .250 .323
22.5 13.0
6.6
8.0 6.35
8.2
25
83-9631
L
Dimensions
(Inches)
B
W
F W1
F1
L
B
Dimensions
(mm)
W
F W1
75° C/300 Volts max.
A-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
Max.
Wire
Ins. Dia.
(Inches)
Max.
Wire
Ins. Dia.
(mm)
22 – 18
0.5 – 1.0
.110 x .020
2.8 x 0.5
.150
3.8
.728 .413 .126 .256 18.5
10.5
16 – 14
1.5 – 2.5
.110 x .020
2.8 x 0.5
.185
4.7
.748 .413 .126 .256 19.0
10.5
22 – 18
0.5 – 1.0
.187 x .020
4.75 x 0.5
.150
3.8
.764 .413 .197 .252 19.4
16 – 14
1.5 – 2.5
.187 x .020
4.75 x 0.5
.185
4.7
.764 .413 .197 .252 19.4
22 – 18
0.5 – 1.0
.250 x .032
6.35 x 0.8
.150
3.8
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.185
14 – 12
2.5 – 4.0
.250 x .032
6.35 x 0.8
.244
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.244
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
L
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
3.2
6.5
25
83-9511
—
—
3.2
6.5
25
83-9521
—
—
10.5
5.0
6.4
25
83-9541
—
—
10.5
5.0
6.4
25
83-9551
—
—
.819 .413 .260 .287 20.8
10.5
6.6
7.3
25
83-9571
—
—
4.7
.819 .413 .260 .287 20.8
10.5
6.6
7.3
25
83-9581
500
84-9581
6.2
.917 .512 .260 .287 23.3
13.0
6.6
7.3
25
83-9591
—
—
6.2
.917 .512 .260 .287 23.3
13.0
6.6
7.3
25
83-9601
—
—
Dimensions
(mm)
B
W
F
Ctn.
Qty.
Cat. No.
L
F
L
75° C/300 Volts max.
Vinyl Insulated Male Disconnects
Wire
Wire
Range Wire Range Tab Size
(AWG)
(mm2)
(Inches)
Max.
Max.
Wire
Wire
Tab Size Ins. Dia. Ins. Dia.
(mm) (Inches) (mm)
Dimensions
(Inches)
B
W
L
F
L
22 – 18
0.5 – 1.0
.250 x .032 6.35 x 0.8
.150
3.8
.858
.413
.250
.303
21.8
10.5
6.35
7.7
25
83-9971
16 – 14
1.5 – 2.5
.250 x .032 6.35 x 0.8
.185
4.7
.858
.413
.250
.303
21.8
10.5
6.35
7.7
25
83-9981
12 – 10
4.0 – 6.0
.250 x .032 6.35 x 0.8
.244
6.2
.945
.512
.250
.303
24.0
13.0
6.35
7.7
25
83-9991
75° C/300 Volts max.
Non-Insulated Female Disconnects
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
L
F
L
F
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.110 x .020
2.8 x 0.5
.630
.189
.126
.256
16.0
4.8
3.2
6.5
25
83-9411
16 – 14
1.5 – 2.5
.110 x .020
2.8 x 0.5
.630
.189
.126
.256
16.0
4.8
3.2
6.5
25
83-9421
22 – 18
0.5 – 1.25
.187 x .020
4.75 x 0.5
.630
.189
.197
.252
16.0
4.8
5.0
6.4
25
83-9441
16 – 14
1.5 – 2.5
.187 x .020
4.75 x 0.5
.630
.189
.197
.252
16.0
4.8
5.0
6.4
25
83-9451
22 – 18
0.5 – 1.25
.250 x .032
6.35 x 0.8
.630
.189
.260
.287
16.0
4.8
6.6
7.3
25
83-9471
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.630
.189
.260
.287
16.0
4.8
6.6
7.3
25
83-9481
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.728
.236
.260
.287
18.5
6.0
6.6
7.3
25
83-9501
105° C/300 Volts max.
1-800-435-0705 for Customer Service
www.idealindustries.com
A-19
Crimp Terminals/Disconnects
Vinyl Insulated Female Disconnects
Nylon Fully-Insulated Female Disconnects
Disconnects
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
Max.
Wire
Ins. Dia.
(Inches)
Max.
Wire
Ins. Dia.
(mm)
22 – 18
0.5 – 1.0
.250 x .032
6.35 x 0.8
.150
3.8
.866 .433 .260 .287 22.0
11.0
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.185
4.7
.866 .433 .260 .287 22.0
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.244
6.2
.945 .512 .260 .287 24.0
L
Dimensions
(Inches)
B
W
F
L
Dimensions
(mm)
B
W
L
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
6.6
7.3
25
83-9771
—
—
11.0
6.6
7.3
25
83-9781
1,000
84-9781
13.0
6.6
7.3
25
83-9791
500
84-9791
105° C/300 Volts max.
Nylon Fully-Insulated Male Disconnects
Wire
Wire
Range Wire Range Tab Size
(AWG)
(mm2)
(Inches)
Max.
Max.
Wire
Wire
Tab Size Ins. Dia. Ins. Dia.
(mm) (Inches) (mm)
L
Dimensions
(Inches)
B
W
F
L
Dimensions
(mm)
B
W
F
Ctn.
Qty.
Cat. No.
22 – 18
0.5 – 1.0
.250 x .032 6.35 x 0.8
.150
3.8
.906
.433
.250
.303
23.0
11.0
6.35
7.7
25
83-9911
16 – 14
1.5 – 2.5
.250 x .032 6.35 x 0.8
.185
4.7
.945
.433
.250
.303
24.0
11.0
6.35
7.7
25
83-9921
12 – 10
4.0 – 6.0
.250 x .032 6.35 x 0.8
.244
6.2
.984
.512
.250
.303
25.0
13.0
6.35
7.7
25
83-9931
105° C/300 Volts max.
Vinyl Insulated Bullet Disconnects
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
Wire
Range
(AWG)
Wire
Range
(mm2)
Max. Wire
Ins. Dia.
(Inches)
Max. Wire
Ins. Dia.
(mm)
L
F
L
F
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.150
3.8
.846
.413
.157
.335
21.5
10.5
4.0
8.5
25
83-8001
16 – 14
1.5 – 2.5
.185
4.7
.846
.413
.157
.335
21.5
10.5
4.0
8.5
25
83-8011
75° C/300 Volts max.
Vinyl Fully-Insulated Receptacle Disconnects
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
Wire
Range
(AWG)
Wire
Range
(mm2)
Max. Wire
Ins. Dia.
(Inches)
Max. Wire
Ins. Dia.
(mm)
L
F
L
F
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.150
3.8
.917
.413
.153
.287
23.3
10.5
3.9
7.3
25
83-8101
16 – 14
1.5 – 2.5
.185
4.7
.917
.413
.153
.287
23.3
10.5
3.9
7.3
25
83-8111
75° C/300 Volts max.
A-20
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Non-Insulated Flag Female Disconnect
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
L
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.551
Dimensions
(Inches)
B
W
.291
.260
F
L
299
14.0
Dimensions
(mm)
B
W
7.4
6.6
F
Ctn. Qty.
Cat. No.
7.6
25
83-9401
Disconnects
105° C/300 Volts max.
Disconnect Adapter – Male to Female (2-1)
Dimensions
(Inches)
Dimensions
(mm)
Tab Size
(Inches)
Tab Size
(mm2)
L
W
L
W
Ctn. Qty.
Cat. No.
.250 x .032
6.35 x 0.8
.551
.260
14.0
6.6
25
83-9801
105° C/300 Volts max.
Non-Insulated Butt Splices
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire Range
(mm2)
L
D
L
D
Ctn. Qty.
Cat. No.
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.591
.130
15.0
3.3
25
83-9001
—
—
16 – 14
1.5 – 2.5
.591
.154
15.0
3.9
25
83-9011
—
—
12 – 10
4.0 – 6.0
.591
.213
15.0
5.4
25
83-9021
500
84-9021
8
8.0
.827
.276
21.0
7.0
25
83-9031
250
84-9031
6
14.0
1.024
.350
26.0
8.9
20
83-9041
—
—
4
22.0
1.142
.445
29.0
11.3
20
83-9051
—
—
Cat. No.
105° C/600 Volts max.
Non-Insulated Parallel Splices
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire Range
(mm2)
L
D
L
D
Ctn. Qty.
Cat. No.
Ctn. Qty.
22 – 18
0.5 – 1.0
.315
.130
8.0
3.3
25
83-9071
—
—
16 – 14
1.5 – 2.5
.315
.154
8.0
3.9
25
83-9081
1,000
84-9081
12 – 10
4.0 – 6.0
.335
.213
8.5
5.4
25
83-9091
—
—
105° C/600 Volts max.
1-800-435-0705 for Customer Service
www.idealindustries.com
A-21
Vinyl Insulated Butt Splices
Disconnects
Wire Range
(mm2)
Max.
Wire Ins.
Dia.
(Inches)
Max.
Wire Ins.
Dia.
(Inches)
22 – 18
0.5 – 1.25
.157
4.0
.986
16 – 14
1.5 – 2.5
.177
4.5
.986
12 – 10
4.0 – 6.0
.248
6.3
1.043
Wire
Range
(AWG)
Dimensions
(Inches)
L
D
Dimensions
(mm)
L
D
Ctn. Qty.
Cat. No.
Ctn. Qty.
Cat. No.
.067
24.6
1.7
25
83-9281
1,000
84-9281
.091
24.6
2.3
25
83-9291
1,000
84-9291
.134
26.5
3.4
25
83-9301
500
84-9301
75° C/600 Volts max.
Vinyl Insulated Parallel Splices
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire
Range
(mm2)
Max. Wire
Ins. Dia.
(Inches)
Max. Wire
Ins. Dia.
(mm)
L
W
L
W
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.157
4.0
.512
.067
13.0
1.7
25
83-9351
16 – 14
1.5 – 2.5
.177
4.5
.512
.091
13.0
2.3
25
83-9361
12 – 10
4.0 – 6.0
.248
6.3
.591
.134
15.0
3.4
25
83-9371
75° C/ 600 Volts max.
Tap Splice Connectors
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire
Range
(mm2)
Color
L
W
L
W
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
Red
1.063
.787
27.0
20.0
25
83-3261
16 – 14
1.5 – 2.5
Blue
1.063
.787
27.0
20.0
25
83-3271
12 – 10
4.0 – 6.0
Yellow
1.358
.807
34.5
20.5
25
83-3281
105°C/ 600 Volts max.
A-22
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Terminal Strips
■
Heavy-duty, corrosion-resistant screws, surface
plates and optional hardware
■ Accessory hardware provides a variety of
termination options
■ Available cover helps prevent contact with live terminals
■
89-200 Series Terminal Strips
89-300 Series Terminal Strips
30A/600V* UL/CSA
15A/250V** UL, 15A/150V** CSA
■ .562 in. (14.28mm) center spacing
■ .375 in. (9.52mm) center spacing
■ Accepts wire sizes from 22 through 10 AWG Cu
■ Accepts wire sizes from 22 through 14 AWG Cu
■ #8-32 philslot, zinc-plated steel terminal screws
(Recommended torque: 16 in. - lb.)
■ #6-32 philslot, zinc-plated steel terminal screws
(Recommended torque: 9 in. - lb.)
Dimensions
(Inches)
Terminal Strips
Rugged polyester thermoplastic base
(UL Rated 94V-O)
■ Operating temperature rated from 130°C (260°F) to
-40°C (-40°F)
■ UL Recognized (E62622) and CSA Certified (LR15364)
Dimensions
(Inches)
Cat. No.
No. of
Poles
A
B
Cat. No.
1.69
89-202
2
1.40
1.12
89-302
2.25
89-203
4
2.16
1.88
89-304
2.81
89-204
6
2.90
2.62
89-306
4.37
3.94
89-206
8
3.66
3.38
89-308
5.50
5.06
89-208
10
4.40
4.12
89-310
10
6.62
6.19
89-210
12
5.16
4.88
89-312
12
7.75
7.31
89-212
No. of
Poles
A
B
2
2.13
3
2.69
4
3.25
6
8
**Max. electrical rating 15A/125V when used with
optional quick-connects.
*Max. electrical rating 30A/250V when used
with optional quick-connects.
1-800-435-0705 for Customer Service
www.idealindustries.com
A-23
89-400 Series Terminal Strips
20A/250V UL/CSA
89-500 Series Terminal Strips
60A/600V* UL/CSA
■ .437 in. (11.10mm) center spacing
■ Available in standard or shorting-block style
■ Accepts wire sizes from 22 through 12 AWG Cu
■ .625 in. (15.88mm) center spacing
■ #6-32 philslot, zinc-plated steel terminal screws
(Recommended torque: 9 in. - lb.)
■ Accepts wire sizes from 22 through 6 AWG Cu
■ #10-32 slotted, nickel plated brass terminal screws
(Recommended torque: 20 in. - lb.)
Terminal Strips
Standard Block
Shorting Block
Dimensions
(Inches)
No. of
Poles
A
B
Cat. No.
2
1.63
1.31
89-402
4
2.51
2.18
89-404
6
3.38
3.06
89-406
8
4.25
3.93
89-408
10
5.13
4.81
89-410
12
6.00
5.68
89-412
Dimensions
(Inches)
No. of
Poles
A
B
Standard Block
Cat. No.
Shorting Block
Cat. No.
4
3.75
2.87
89-504
89-505
6
5.00
4.12
89-506
89-507
8
6.25
5.37
89-508
89-509
12
8.75
7.87
89-512
89-513
*Max. electrical rating 60A/600V achieved only when used
with #6 AWG copper wire crimped to ring terminal.
A-24
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Covers
No. of
Circuits
For Use With Terminal Strip Series
89-200
89-300
Clear
Clear
Cat. No.
Cat. No.
89-334
89-400
Clear
Cat. No.
89-500
Clear
Cat. No.
89-434
—
2
89-233
3
89-234
—
—
—
4
89-235
89-335
89-435
89-514
6
89-236
89-336
89-436
89-516
8
89-237
89-337
89-437
89-518
10
89-238
89-338
89-438
—
12
89-239
89-339
89-439
89-520
Covers
■ Helps prevent contact with live terminals
Quick Connects
■ Allows fast, flexible circuit changes
Flat - Flat
Flat - None
For Use With
Terminal Strip
Series
89-300
Tab Size
(Inches)
.187 x .020
Qty
10 pcs.
Flat - None
Cat. No.
89-314
Flat - Flat
Cat. No.
89-317
89-200 & 89-400 .250 x .031
10 pcs.
89-414
89-417
Jumpers
■ Provides easy connection of
multiple circuits
Flat Slip-on
Over Barrier
Slip-on
Flat 12-Circuit
For Use With
Qty.
10 pcs.
100 pcs.
Flat
Slip-on
Cat. No.
89-229
89-230
Over Barrier
Slip-on
Cat. No.
89-224
—
Flat
12-Circuit
Cat. No.
—
—
.375
10 pcs.
100 pcs.
89-323
89-330
89-324
—
—
—
89-400
.437
10 pcs.
100 pcs.
89-423
89-430
89-424
—
—
—
89-500
.625
2 pcs.
—
—
89-525
Terminal Strip
Series
Center Spacing
(Inches)
89-200
.562
89-300
1-800-435-0705 for Customer Service
www.idealindustries.com
A-25
Barrier Strips
Barrier Strips
■
Recessed screws and tubular contacts provide
added safety and help prevent short circuits
■
Tubular contacts connect stripped, un-terminated
solid or stranded wire directly to each contact
■
Integrated wire protectors prevent twisting and
breakage of stranded wire during connection
■
Modular 12-circuit design can be cut into smaller
sections, or stacked end-to-end
■
Rugged nylon construction, UL 94V2
■
Operating temperature rated to 105°C (221°F)
Barrier Strips
Electrical
Ratings
20A/600V UL
10A/400V CSA
30A/600V UL
20A/400V CSA
Wire
Range
(AWG)
22 - 12
20 - 18
22 - 10
18 - 14
35A/600V UL/CUL
50A/600V UL/CUL
No. of Torque
Circuits in.-lb.
Model
No.
A
B
Dimensions
(Inches)
C
D
E
F*
A
B
Dimensions
(mm)
C
D
E
F**
Cat. No.
12
3.5
PA8DS
3.787
0.669 0.570
0.315
0.114
0.110
96.2
17.0
14.5
8.0
2.9
2.8
89-608
12
4.4
PA10DS
4.626
0.795 0.670
0.394
0.142
0.134 117.0
20.2
17.0
10.0
3.6
3.4
89-610
22 - 10
12
7.0
PA12DS
5.540
0.937 0.748
0.472
0.154
0.154 140.7
23.8
19.0
12.0
3.9
3.9
89-612
20 - 8
12
12.0
PA14DS
6.220
1.008 0.992
0.531
0.173
0.189 158.0
25.6
25.2
13.5
4.4
4.8
89-614
*Plus or minus .004 in.
**Plus or minus 0.1mm
A-26
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Wrap-Cap® Insulators
Crimp Connectors
■ Provide high dielectric and physical
protection for UL Listed, non-insulated
pressure-type wire connectors
■ Unique design
completely covers
splice — insulates
both around and
between wires
■ Designed for making fast, permanent, pressure-type connections
■ Long, zinc-plated steel sleeves maximize contact area
with conductors
■ UL Listed and CSA Certified for 600V maximum building wiring
(1,000V maximum for fixtures and signs); temperature rated at
75°C (167°F) maximum
Steel Crimp Connectors
Wire Combination
Range
411
600V
18 thru 8 AWG
Min. 3 #12
Max. 4 #10
412
600V
18 thru 4 AWG
Min. 1 #14 & 1 #16
Max. 2 #8 & 1 #6
Quantity
Box of 100
Cat. No.
30-410
Carton of 1,000
30-510
Keg of 10,000
30-610
Box of 40
30-401
Box of 50
30-411
Carton of 1,000
30-511
Box of 20
30-402
Box of 50
30-412
Carton of 1,000
30-512
Description
415
Insulator for Model
410 sleeves
417
Insulator for Model 411
& 412 sleeves
Quantity
Cat. No.
Box of 20
Box of 100
Carton of 1,000
Keg of 10,000
Box of 10
Box of 50
Carton of 1,000
30-405
30-415
30-515
30-615
30-407
30-417
30-517
Dimensions (Inches)
Model
A
B
C
D
415
1/2
5/8
23/32
1-13/64
417
11/16
3/4
3/4
1-25/32
- W I RE
UL
R
C ONN
410
600V
18 thru 10 AWG
Min. 1 #14 & 1 #18
Max. 2 #10 & 2 #14
Model
TE D
■ Steel crimp connectors are UL Listed to 486C and CSA Certified
to C22.2 #188; comply with Federal Specification W-S-610E.
LIS
■ Will not vibrate loose when securely crimped
Model
■ Reusable and easy to install
Pre-Insulated Crimp Connectors
A
B
410 Steel
3/8
13/64
411 Steel
5/8
1/4
412 Steel
51/64
19/64
LIS
- W I RE
UL
R
C ONN
TE D
Model
IDEAL hand tools U.L. listed for Model 410, 411, 412.
Crimps: 30-420, 30-425, 30-429, 30-430.
■ Three models cover a wide range
of wire combinations from 22 AWG
stranded through 8 AWG stranded
■ Compact design fits easily
into tight locations
■ Flared skirt protects against
turned–back strands
■ Beveled opening eases
wire entry
■ UL Listed and CSA Certified for 600V maximum building wiring
(1,000V maximum for fixtures and signs); temperature rated at
105°C (221°F) maximum
Model
Wire Combination Range
Quantity
Cat. No.
1,000
30-245
48
600V*
Min. 2 #22
Max. 1 #14 w/2 #18
10,000
30-645
600V*
Min. 1 #22 w/1 #18
Max. 1 #12 w/1 #16
1,000
30-249
49
10,000
30-649
600V*
Min. 4 #w16
Max. 1 #12 w/4 #14
1,000
30-148
NC-8
5,000
30-648
- W I RE
1-800-435-0705 for Customer Service
UL
R
C ONN
LIS
*1,000V maximum in fixtures and signs
TE D
Dimensions (Inches)
www.idealindustries.com
A-27
Wire Connectors
■ Cap and loop design eliminates
need for tape
Set-Screw Wire Connectors
Set-Screw Holder
■ Convenient tool for holding and
tightening set-screw connectors
■ Accepts IDEAL
Models 11 and 22
set-screw connectors
Cat. No.
11 & 22
K-2422
Noalox® Anti-Oxidant
■ Solid brass sleeves in three sizes handle 18 through 12 AWG wires
■ Set-screw easily and securely applies maximum compression to
conductors to ensure a vibration-resistant splice
■ Permits fast visual inspection of splice
■ Tough, flame-retardant shell rated at 150°C (302°F)
■ UL Listed to 486C and CSA Certified to C22.2 #188 ; comply with
Federal Specification W-S-610E
Model
10
11
22
Wire Combination
Range
300V
22 thru 16 AWG
Min. 1 #20 w/1 #22
Max. 2 #14 w/1 #16
600V
22 thru 14 AWG
Min. 1 #14 w/1 #20
Max. 3 #14 w/2 #18
600V
20 thru 10 AWG
Min. 1 #16 w/3 #18
Max. 2 #10 w/1 #12
Quantity
Cat. No.
Box of 100
30-210
Carton of 1,000
30-310
Box of 100
30-211
Carton of 1,000
30-311
Box of 100
30-222
Carton of 1,000
30-322
Shell
C
D
E
1/8
5/16
1/2
19/64
45/64
11
3/16
3/8
33/64
13/32
63/64
22
1/4
1/2
11/16
13/32
1-1/64
TE D
B
10
- W I RE
www.idealindustries.com
UL
R
C ONN
A-28
■ Provides additional inner-strand and inner-conductor current
paths for improved conductivity and cooler connections
■ Carrier material excludes air to prevent further oxidation
Dimensions (Inches)
Insert
Model
A
■ Anti-oxidant and anti-seizing compound improves efficiency
and service life of aluminum electrical applications
■ Suspended zinc particles penetrate and cut aluminum oxide
LIS
Wire Connectors
■ Eliminates need for restripping wire each time connection is disturbed
For Connector Models
■ For use with all types of pressure-type wire connectors
including screw-on, tap, service entrance and split-bolt
■ Reduces galling and seizing on aluminum conduit joints —
promotes good ground continuity
Description
Cat. No.
1/2-oz. Tube
30-024
4-oz. Squeeze bottle
30-026
8-oz. Squeeze bottle
30-030
8-oz. Brush cap
30-031
1-gal. Bucket
30-032
5-gal. Bucket
30-040
1-800-435-0705 for Customer Service
Wire Termination
Powr-Connect™ Mechanical Lugs
■ Uniform plating resists corrosion, reduces contact
resistance and provides maximum conductivity
■ UL Listed at 600V — acceptable for use through 2,000V
■ Can be used through 8,000V if installed in
accordance with National Electric Code Section
310-6 (UL Green Book)
■ UL Listed to 486B for dual-rated connectors —
UL Listed to 486A for copper connectors
■ Meets ANSI C119.4 requirements
Dual-Rated (Al/Cu) Single-Barrel Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL Listed to 486B (AL9CU)
Tang and
mounting hole
Slotted screw
Wire range and
stud size
identification
Dimensions (Inches)
L
W
H
Stud
Size (In.)
Cat.
No.
LA-50-1
6 – 14 AWG
Narrow type – special mounting requirements
1-1/16
3/8
1/2
1/4
87-002
LA-2
LA-1/0
2 – 14 AWG
1/0 – 14 AWG
1-5/32
1-15/32
1/2
5/8
9/16
25/32
1/4
1/4
87-005
87-007
Functional wire stop
LA-1/0*
LA-2/0
LA-2/0*
1/0 – 14 AWG
2/0 – 14 AWG
2/0 – 14 AWG
1-15/32
1-15/32
1-15/32
5/8
5/8
5/8
25/32
25/32
23/32
3/8
1/4
3/5
87-008
87-009
87-010
Hex socket
screw
LA-250
LA-250*
250 KCMIL – 6 AWG
250 KCMIL – 6 AWG
2
2
1
1
1-1/8
1-1/8
5/16
3/8
87-011
87-012
LA-350
LA-350*
350 KCMIL – 6 AWG
350 KCMIL – 6 AWG
2-1/4
2-1/4
1-1/8
1-1/8
1-1/4
1-1/4
3/8
1/2
87-015
87-016
LA-500
LA-500*
500 KCMIL – 4 AWG
500 KCMIL – 4 AWG
2-13/16
2-13/16
1-1/4
1-1/2
1-9/16
1-9/16
3/8
1/2
87-017
87-018
Chamfered
wire entry
Tang and
mounting hole
Wire range
and stud size
identification
Wire
Range
Model
Chamfered
wire entry
*Larger mounting hole
TE
LIS D
C
UL
R
N
CO N
IR
-W E
Dual-Rated (Al/Cu) Two-Barrel Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Wire range
and stud size
identification
Tang
and mounting
hole
Two hex
socket screws
Chamfered
wire entry
1-800-435-0705 for Customer Service
Dimensions (Inches)
L
W
H
Model
Wire
Range
L2A1-1/0
L2A1-2/0
L2A1-250
1/0 – 14 AWG (2)
2/0 – 14 AWG (2)
250 KCMIL – 6 AWG (2)
1-15/32
1-15/32
2-9/16
1-1/8
1-1/4
1-5/8
L2A1-350
L2A1-600
350 KCMIL – 6 AWG (2)
600 KCMIL – 2 AWG (2)
2-7/8
3-3/16
1-15/16
2-13/32
Stud
Size (In.)
Cat.
No.
25/32
25/32
1-3/16
1/4
1/4
3/8
87-040
87-042
87-044
1-1/4
1-9/16
1/2
1/2
87-046
87-048
www.idealindustries.com
A-29
Mechanical Lugs
■ Chamfered entry for faster, more reliable connections
Dual-Rated (Al/Cu) Panel-Board Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL Listed to 486B (AL9CU)
Tang and two
mounting holes
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
PV2-600
600 KCMIL – 2 AWG
4-29/32
1-1/2
3
3/8
87-126
PV2-750
750 KCMIL – 1/0 AWG
4-29/32
1-9/16
3
3/8
87-129
PV3-600
600 KCMIL – 2 AWG
4-29/32
2-1/2
3
3/8
87-132
PV3-750
750 KCMIL – 1/0 AWG
4-29/32 2-27/32
3
3/8
87-135
PV4-600
600 KCMIL – 2 AWG
4-29/32
3
3/8
87-138
PV4-750
750 KCMIL – 3/0 AWG
3
3/8
87-141
Chamfered
wire entry
Hex socket
screws
Wire
stop
Wire range
and stud size
identification
2-1/2
4-29/32 2-27/32
C
UL
R
N
CO N
IR
-W E
TE
LIS D
Dual-Rated (Al/Cu) Splicer Reducers
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL Listed to 486B (AL9CU)
Slotted screws
Chamfered
wire entry
Solid center
barrier
Rounded bottom
facilitates tapping
Hex socket screws
Wire
Range
SR-2*
SR-1/0*
2 – 14 AWG
1/0 – 14 AWG
1-3/8
1-29/32
1/2
3/4
SR-250
250 KCMIL – 6 AWG
3-15/16
1
Stud
Size (In.)
Cat.
No.
9/16
3/4
5/8
7/8
87-143
87-144
1-1/8
1-15/16
87-145
*Slotted screws
IR
-W E
C
UL
R
N
CO N
Chamfered
wire entry
Dimensions (Inches)
L
W
H
Model
TE
LIS D
Mechanical Lugs
Flat
bottom ensures
good mounting
contact
Solid center
barrier
Rounded bottom
facilitates tapping
A-30
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Powr-Connect™ Tap Connectors
Dual-Rated (Al/Cu) Parallel-Tap Connectors with Covers
■ Electro tin-plated, high-strength aluminum alloy construction
Insulating cover reduces
installation cost
Wire Range
Tap
Strip
Length (In.)
Cat.
No.
GP-2C
GP-1/0C
2 – 12 AWG
1/0 – 2 AWG
4 – 14 AWG
1/0 – 14 AWG
5/8
3/4
2-7/32
2-5/8
1-29/32
2-5/32
1-7/64
1-1/4
87-180
87-182
GP-250C
GP-350C
GP-500C
250 KCMIL – 1/0 AWG
350 KCMIL – 4/0 AWG
500 – 350 KCMIL
250 KCMIL – 6 AWG
350 KCMIL – 6 AWG
500 KCMIL – 2 AWG
1-1/16
1-1/4
1-3/8
3-7/16
3-3/4
4-3/8
2-7/8
3-3/16
3-5/16
1-5/8
1-3/4
2-3/32
87-186
87-190
87-194
C
TE
LIS D
IR
-W E
Self-locking
design
UL
R
N
CO N
Flexible
hinge
Dimensions (Inches)
L
W
H
Main
Model
Dual-Rated (Al/Cu) Parallel-Tap Connectors without Covers
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL Listed to 486B (AL9CU)
Slotted
screws
Wire Range
Dimensions (Inches)
L
W
H
Main
Tap
Strip
Length (In.)
GP-2
GP-1/0
2 – 12 AWG
1/0 – 2 AWG
4 – 14 AWG
1/0 – 14 AWG
5/8
3/4
1-25/64
1-3/4
5/8
3/4
7/8
1
87-150
87-152
GP-250
250 KCMIL – 1/0 AWG
250 KCMIL – 6 AWG
1-1/16
2-9/32
1-1/16
1-5/16
87-156
Model
Cat.
No.
TE
LIS D
C
UL
R
N
CO N
IR
-W E
Serrated barrel
bottom for positive
terminations
Insulating Covers for Parallel-Tap Connectors
■ 600V maximum
■ 105°C maximum temperature
Flexible hinge
Self-locking
design
Range
identification
with color code
Dimensions (Inches)
W
H
Model
For Use
With:
Color
L
Cat.
No.
GIC-2
87-150
Yellow
2-7/32
1-29/32
1-7/64
87-370
GIC-1/0
87-152
Gray
2-5/8
2-5/32
1-1/4
87-372
GIC-250
87-150
Red
3-7/16
2-7/8
1-5/8
87-374
Thermoplastic
elastomer material
1-800-435-0705 for Customer Service
www.idealindustries.com
A-31
Mechanical Lugs
■ UL Listed to 486B (AL9CU) — 105°C, 600V max.
Powr-Connect™ Grounding Connectors
Mechanical Lugs
■ Designed to maintain proper contact and alignment between
ground and wire rod
■ Brass or plated screws for corrosion resistance
Type K Split Bolts for Copper Connections
Dual-Rated (Al/Cu) Type AS Split Bolts
■ High-strength copper alloy
construction (nut, bolt and
body)
■ UL 486B Listed AL9CU
■ High-strength copper alloy construction
Wire range
Spacer provides serration
to retard corrosion
■ UL 486A Listed
Range for
Equal Run
& Tap
K-10
Wire Range
Min. Tap
with Max.
Run
10 str. – 12 str.
Anti-galling
threaded components
"Tooth" configuration
provides low contact
resistance
Bottom pad
attached to
nut and guide
assembly
Model
Aluminum, tin-plated
to inhibit oxide formation
Run
16 str.
Cat. No.
Model
Tap
87-650
Min.
10 sol.
Max.
6 str.
Min.
10 sol.
Cat. No.
AS-6
Max.
6 str.
4 str.
8 sol.
4 str.
10 sol.
87-682
87-681
K-8
8 str. – 10 str.
14 str.
87-651
AS-4
K-6
6 sol. – 8 str.
14 str.
87-652
AS-2
2 str.
6 sol.
2 str.
8 str.
87-683
87-653
AS-1/0
1/0 str.
2 compact
1/0 str.
8 sol.
87-685
2/0 str.
2 compact
2/0 str.
8 str.
87-686
4/0 str.
2 compact
4/0 str.
6 str.
87-687
K-4
4 sol. – 8 str.
14 str.
K-3
2 sol. – 6 str.
14 str
87-654
AS-2/0
K-2
2 str. – 6 str.
14 str.
87-655
AS-4/0
K-1/0
1/0 str. – 4 str.
14 str.
87-656
K-2/0
2/0 str. – 2 str.
14 str.
87-657
K-3/0
3/0 str. – 1 str.
8 sol.
87-658
High-Strength Ground Clamps
Heavy-Duty Clamps
Model
Rod
Dia. (In.)
Wire
Range
WB58
5/8
1/0 – 8
Dimensions (Inches)
H
W
L
2-1/8
7/8
1
Cat.
No.
87-958
Model
Pipe
Size (In.)
Wire
Range
Dimensions (Inches)
H
W
L
Cat.
No.
J
1/2 – 1
2 – 10
2-3/4
2-3/8
3/4
87-563
J2
1-1/4 – 2
2 – 10
3-3/4
3-5/8
7/8
87-564
Dual-Rated (Al/Cu) Street-Light
Connector Kit with Cover
■ UL 486A Listed (Lug only)
Flexible plastisol
insulating cover
Chamfered
wire entry
Aluminum screws
Model
Wire
Range
No. of
Cond.
SLK-1/0
1/0 – 14 AWG
3
A-32
www.idealindustries.com
Dimensions (Inches)
L
W
H
2
1-3/16
Cat.
No.
2-3/16 88-100
1-800-435-0705 for Customer Service
Wire Termination
Powr-ConnectTM Mechanical Solderless Lugs
Single-Hole Solderless Lugs for Copper Conductors (Offset)
■ Electrolytic copper construction
Slotted
screw
Wire range
and stud size
identification
Hex head
bolt
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
CF-25*
CF-35
CF-70
CF-90
10 – 14 AWG
6 – 14 AWG
4 – 14 AWG
2 – 8 AWG
#8
3/16
1/4
1/4
1
1-3/32
1-5/16
1-15/32
5/16
3/8
1/2
1/2
3/8
3/4
13/16
1
87-700
87-701
87-702
87-703
CF-125
CF-225
1/0 – 2 AWG
4/0 – 2 AWG
1/4
5/16
1-13/16
2-5/8
5/8
1
1-11/32
1-13/16
87-704
87-706
*Not CSA Certified
Floating
offset tang
Barrel collar
ensures positive contact
Single-Hole Solderless Lugs for Copper Conductors
■ Electrolytic copper construction
■ UL 486A Listed
Slotted
screw
Tang
staked to
collar
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
FT-65
6 – 14 AWG
3/16
1
3/8
3/4
87-736
FT-90
1/0 – 14 AWG
1/4
1-17/64
5/8
1
87-738
Hex
socket
screw
Dual-Rated (AI/Cu) Collar Connectors
Slotted wire
screw
10-32 tapped mounting hole
with 0.229 in. square boss
for bottom mounting to
electrical devices or bus bars
1-800-435-0705 for Customer Service
Dimensions (Inches)
Model
Wire
Range
L
W
H
Cat.
No.
CA-60**
2 – 14 AWG
9/16
15/32
15/32
87-583
CA-110*
1/0 – 14 AWG
19/32
17/32
5/8
87-585
*Successfully tested to AL9CU
**Successfully tested to AL7CU
www.idealindustries.com
A-33
Mechanical Lugs
■ UL 486A listed
Notes:
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
Notes
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
A-34
www.idealindustries.com
1-800-435-0705 for Customer Service
Twist-on Wire Connectors
Wire Termination
The Buchanan C-24 Crimp Tool
has an iron-clad reputation that’s
up to every job, every time.
A patented four-way crimp ensures
reliable connections, while the
spring-loaded, cam-actuated design
fits a wide range of connectors.
Our wedge-edge expanding
spring is specially designed for faster
pull-up and quick connections.
It also accommodates a wide
range of wire gauges.
(5) #12 solid
(2) #10 stranded
(1) #14 solid
(2) #12 stranded
(1) #18 stranded
(2) #14 solid
(1) #14 solid
(2) #18 stranded
The B2 B-CAP® Wire Connector is
the universal connector that
accepts the widest range of wire
combinations. Plus, the Classic
Fin™ ergonomic design fits easily
in tight electrical boxes.
(3) #12 solid
(2) #14 solid
The comprehensive line of
Buchanan sectional
terminal blocks offers a
wide range of block
configurations, mounting
options and contact styles
accommodating wire sizes
from 30 AWG to 250 MCM.
A-35
B-CAP® Wire Connectors
■ Three color-coded models cover a full range of wire
sizes from 22 AWG through 6 AWG
■ Classic FinTM design provides secure grip for extra
leverage on maximum wire combinations
Twist-on Wire Connectors
■ Live-action spring expands to accept wire shape and size – no
pre-twisting required
■ Square-wire spring threads directly onto conductors for fast,
secure connections
■ Deep skirt protects against flash-over and turned-back strands
for maximum dielectric protection
■ Easily removed for repeat usage on same size or
larger wire combinations
■ Tough, UL 94V-2 flame-retardant shell rated at 105oC (221oF)
■ Green-B® designed for making ground connections and
bonding non-metallic sheathed cable
■ UL 486C Listed (Green-B® UL 467 Listed) and CSA 22.2 #188
Certified; comply with Federal Specification -S-610E
(
)
Dimensions Inches
mm
Model
B1
A
B2
B4
BGR
B
Model
Color
B1
Yellow
Red
B2
B4
Blue-Gray
BGR
Green
A
31/32
24.5
1-5/32
29.5
1-1/2
38
B
15/32
12
9/16
14
3/4
19
1-5/32
29.5
9/16
14
Live-action, squarewire spring
Tough, durable
thermoplastic
shell
Wire Combination
Range (Inches)
Wire Combination
Range (mm)
600V*
22 to 10 AWG
Min. 2 #18
Max. 3 #12
600V*
,34mm2 to 6,0mm2
Min. 2-,75mm2
Max. 3-4,0mm2
600V*
22 to 8 AWG
Min. 2 #18
Max. 5 #12
Contoured Classic
Fin™
600V*
,34mm2 to 10,0mm2
Min. 2-,75mm2
Max. 5-4,0mm2
600V*
14 to 6 AWG
Min. 2 #12
Max. 2 #6
14 to 10 AWG
600V*
2,5mm2 to 16,0mm2
Min. 2-4,0mm2
Max. 2-16,0mm2
2,5mm2 to 6,0mm2
Min. 2 #14
Max. 5 #12
Deep skirt, wide
throat
Quantity / Package
Cat. No.
100 / Box
B1-1
250 / Jar
B1-250JR
500 / Jar
B1-500JR
2,500 / Bucket (5 bags, 500 ea.)
B1-25
10,000 / Keg (20 bags, 500 ea.)
B1-B
Barrel of 25,000
B1-SK
100 / Box
B2-1
350 / Jar
B2-350JR
500 / Jar
B2-500JR
2,500 / Bucket (5 bags, 500 ea.)
B2-25
10,000 / Keg (20 bags, 500 ea.)
B2-B
Barrel of 25,000
B2-SK
50 / Box
B4-1
1,000 / Bucket (4 bags, 250 ea.)
B4-25
2,500 / Keg (10 bags, 250 ea.)
B4-B
50 / Box
BGR-1
Min. 2-2,5mm2
2,500 / Bucket (10 bags, 250 ea.)
BGR-25
Max. 5-4,0mm2
5,000 / Keg (20 bags, 250 ea.)
BGR-B
*1,000V maximum in fixtures and signs
EN 60-998-2-4
A-36
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
WireTwist™ Wire Connectors
■ Five color-coded models cover common construction wire
ranges
■ Ribbed cap provides positive grip for fast, easy installation
■ Deep, wide-throated skirt protects against flash-over and
turned-back strands for maximum dielectric protection
■ Tough, UL 94V-2 flame-retardant shell rated at 105oC (221oF)
■ UL 486C Listed and CSA 22.2 #188 Certified
Positive grip
design
(
)
Model
A
B
WT1
37/64
15
21/64
8
WT2
45/64
18
25/64
10
WT3
55/64
22
7/16
11
WT4
61/64
24
35/64
14
WT6
1-1/16
27
21/32
17
Dimensions Inches
mm
A
B
Model
Color
WT1
Gray
WT2
WT3
WT4
WT6
Blue
Orange
Yellow
Red
Flame-retardant,
thermoplastic shell
Deep skirt, wide
throat
Threaded entry
Wire Combination
Range (Inches)
Wire Combination
Range (mm)
300V
22 to 14 AWG
Min. 3 #22
Max. 2 #16
300V
,34mm2 to 2,5mm2
Min. 3-,34mm2
Max. 2-1,5mm2
300V
22 to 14 AWG
Min. 3 #20
Max. 3 #16
600V*
22 to 14 AWG
Min. 2 #18
Max. 2 #14
600V*
22 to 10 AWG
Min. 3 #20
Max. 2 #12
600V*
20 to 8 AWG
Min. 2 #14
Max. 4 #12
Fixed squarewire spring
300V
,34mm2 to 2,5mm2
Min. 3-,50mm2
Max. 3-1,5mm2
600V*
,34mm2 to 2,5mm2
Min. 2-,75mm2
Max. 2-2,5mm2
600V*
,75mm2 to 6,0mm2
Min. 3-,50mm2
Max. 2-4,0mm2
600V*
,50mm2 to 10,0mm2
Min. 2-2,5mm2
Max. 4-4,0mm2
Quantity / Package
BUCHANAN
Cat. No.
IDEAL
Cat. No.
100 / Box
WT1-1
30-WT1C
500 / Bag
WT1-B
30-WT1B
50,000 / Barrel
—
30-891
100 / Box
WT2-1
30-WT2C
500 / Bag
WT2-B
30-WT2B
50,000 / Barrel
—
30-892
100 / Box
WT3-1
30-WT3C
500 / Bag
WT3-B
30-WT3B
50,000 / Barrel
—
30-893
100 / Box
WT4-1
30-WT4C
500 / Bag
WT4-B
30-WT4B
30,000 / Barrel
—
30-894
100 / Box
WT6-1
30-WT6C
250 / Bag
WT6-B
30-WT6B
20,000 / Barrel
—
30-896
*1,000V maximum in fixtures and signs
**Includes 5 each of WT1, WT2, WT3, WT4 and WT6 WireTwist™ Wire Connectors
1-800-435-0705 for Customer Service
www.idealindustries.com
A-37
Twist-on Wire Connectors
■ Fixed, square-wire spring threads itself creating a secure
pressure grip
WingTwist™ Wire Connectors
■ Four color-coded models cover common construction
wire ranges; green model designed for ground connections
■ Unique contoured wing design acts as built-in wrench
providing maximum torque with minimum effort
Twist-on WIre Connectors
■ Fixed, square-wire spring threads itself creating secure pressure
grip
■ Deep, wide-throated skirt protects against flash-over and turnedback strands for maximum dielectric protection
■ Tough, UL 94V-2 flame retardant shell rated at 105°C (221°F)
Tough,
flame-retardant shell
■ UL 486C Listed (WGR UL 467 Listed) and CSA C22.2
#188 Certified
(
)
Model
A
B
WT51
1-1/32
26
23/32
18
WT52
1-1/4
32
29/32
23
WT53
1-5/16
33
1
25
WT54
1-9/16
40
1-15/64
31
WGR
1-5/32
29.5
7/8
22
Dimensions Inches
mm
A
B
Model
WT51
WT41
WT52
WT54
WGR
WT5
Color
Yellow
Tan
Red
Blue
Green
Assortment**
Fixed squarewire spring
Wire Combination
Range (Inches)
Wire Combination
Range (mm)
600V*
18 to 10 AWG
Min. 2 #18
Max. 3 #12
600V*
,75mm2 to 6,0mm2
Min. 2-,75mm2
Max. 3-4,0mm2
600V*
22 to 10 AWG
Min. 2 #20
Max. 3 #10 Solid
600V*
18 to 10 AWG
Min. 2 #14
Max. 5 #12
Built-in
contoured wings
Deep, wide
skirt
600V*
,34mm2 to 6,0mm2
Min. 2-0,5mm2
Max. 3-6,0mm2
600V*
,75mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 5-4,0mm2
600V*
14 to 6 AWG
Min. 3 #12
Max. 2 #6
600V*
2,5mm2 to 16,0mm2
Min. 3-4,0mm2
Max. 2-16,0mm2
14 to 10 AWG
Min. 2 #14
Max. 5 #12
2,5mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 5-4,0mm2
See WT51 & WT52 above
See WT51 & WT52 above
Quantity / Package
BUCHANAN
Cat. No.
IDEAL
Cat. No.
100 / Box
WT51-1
30-WT51C
500 / Bag
WT51-B
30-WT51B
500 / Jar
WT51-500JR
30-WT51J
25,000 / Barrel
WT51-SK
30-886
100 / Box
WT41-1
30-WT41C
500 / Bag
WT41-B
30-WT41B
500 / Jar
WT41-500JR
30-WT41J
25,000 / Barrel
WT41-SK
30-885
100 / Box
WT52-1
30-WT52C
500 / Bag
WT52-B
30-WT52B
500 / Jar
WT52-500JR
30-WT52J
25,000 / Barrel
WT52-SK
30-887
50 / Box
WT54-1
30-WT54C
100 / Bag
WT54-B
30-WT54B
50 / Box
WGR-1
30-WGRC
250 / Bag
WGR-B
30-WGRB
500 / Jar
WGR-500JR
30-WGRJ
25,000 / Barrel
WGR-SK
30-890
(75 Yellow, 75 Red)/Jar
WT5152JR
—
*1,000V maximum in fixtures and signs
**Includes 75 each of WT51 and WT52 WingTwist™ Wire Connectors
A-38
www.idealindustries.com
1-800-435-0705 for Customer Service
Splice Cap Crimp Connectors
Four-Way Crimp Tool
■ Designed for making
fast, permanent, pressuretype connections
■ Patented design ensures even
compression and reliable
connectors
■ Solid copper sleeves require
less crimping pressure
■ Spring-loaded, cam-actuated
plungers
■ Resist corrosion in harsh environments
■ Fingertip adjustment for
different connector sizes
■ Tin-plated steel sleeves also available
■ UL 486C Listed and CSA C22.2 #188 Certified; comply with
Federal Specification W-S-61D
Description
Cat. No.
Four-Way Crimp Tool
Description
Wire Combination
Range (Inches)
Quantity / Package
Cat. No.
100 / Box
2006S
1,000 / Bag
2006SB
50 / Box
2011S
500 / Bag
2011SB
Quantity / Package
Cat. No.
100 / Box
1,000 / Bag
50 / Box
500 / Bag
2007B
2014
2014B
Stud Size
Quantity / Package
Cat. No.
Ring
10
50 / Box
16-8-10
Ring
1/4
50 / Box
16-8-1/4
Spade
10
50 / Box
16-8-10S
Locking Spade
10
50 / Box
16-8-10L
Copper Crimp
Connector
600V*
18 to 10 AWG
Min. 2 #18
Max. 4 #12
Copper Crimp
Connector
600V*
14 to 4 AWG
Min. 2 #10
Max. 2 #6
C-24
*1,000V maximum in fixtures and signs
Splice Cap Insulators
■ Convenient, safe and
fast installation
■ Snap-on nylon construction
■ Rated at 105°C (221°F) –
600V (1,000V maximum in fixtures
and signs)
For Connector Model
2006S & 2008S
2011S
2007
Termend® Lugs
■ Convenient, safe and
fast installation
■ One size fits 16 AWG
through 8 AWG solid or
stranded wire
■ Available in ring, spade
and locking spade
Tongue Type
1-800-435-0705 for Customer Service
www.idealindustries.com
A-39
Connectors/Crimp Tool
Wire Termination
B-TAP® Insulation-Piercing Tap Connectors
■ Eliminates split bolts and tape
■ Easy two-minute installation requires only box/socket wrench
■ Installs on energized systems eliminating costly power shutdowns
■ Self-sealing, grease-filled end-cap ensures safe, weather-tight connection
■ Unique turbo spacer keeps connector wide open for quick and easy installation
■ Torque-regulating nut breaks off when proper tension is reached
Tap Connectors
■ Full-line is 600V dual-rated,194˚F (90˚C)
B-Tap® Wire Range Chart
Wire Size
Cat. No.
14
12
10
8
6
4
3
2
1
1/0
2/0
3/0
4/0
250
300
350
400
500
750
Main: 1/0 - 8
BTC1/0-10
Tap: 2 - 10
Main: 2/0 - 4
BTC2/0-14
Tap: 10 - 14
Main: 4/0 - 2
BTC4/0-4
Tap: 4/0 - 4
Main: 4/0 - 3
BTC4/0-10
Tap: 2 - 10
Main: 4/0 - 2
BTC4/0-6
Tap: 2/0 - 6
Main: 250 - 1
BTC250-4
Tap: 4/0 - 4
Main: 350 - 1/0
BTC350-1/0
Tap: 350 - 1/0
Main: 500 - 2/0
BTC500-4
Tap: 4/0 - 4
B
Main: 500 - 4/0
BTC500-1/0
Tap: 350 - 1/0
Main: 750 - 3/0
BTC500-14
A
Tap: 10 - 14
BTC750-250
Main: 750 - 250
Tap: 500 - 250
Main
Tap
Conductor
Range
Dimensions (Inches)
C
Tap
Voltage
Rating
A
B
C
Socket
Size (Inches)
Torque
(In. Lbs.)
No. of
Bolts
Cat. No.
1/0-8
2-10 1
600V
3.1
1.8
2.2
1/2
80
1
BTC1/0-10
2/0-4
10-14 2
600V
3.1
1.8
2.2
1/2
80
1
BTC2/0-14
4/0-2
4/0-4
600V
4.4
2.4
3.2
1/2
160
1
BTC4/0-4
4/0-3
2-10 3
600V
3.1
1.8
2.2
1/2
125
1
BTC4/0-10
4/0-2
2/0-6
600V
3.5
2.2
2.5
1/2
160
1
BTC4/0-6
Run
250-1
350-1/0
4/0-4
600V
3.5
2.2
2.5
1/2
160
1
BTC250-4
350-1/0
600V
4.5
3
3.9
5/8
330
2
BTC350-1/0
500-2/0
4/0-4
600V
4.5
3
3.9
5/8
330
2
BTC500-4
500-4/0
350-1/0
600V
4.5
3
3.9
5/8
330
2
BTC500-1/0
750-3/0
10-144
600V
3.7
2.5
2.2
1/2
80
1
BTC500-14
750-250
500-250
600V
4.7
3.4
4.75
5/8
330
2
BTC750-250
Assortment*
BTCA-2
*
Includes BTC 1/0-10, BTC 2/0-14, BTC 4/0-2, BTC 4/0-10, BTC 4/0-6, BTC 250-4, BTC 350-1/0, BTC 500-4 & BTC 500-1/0
3
Tap #2 - #10 Cu solid/stranded; #2 - #10 Al stranded
Tap #2 - #10 Cu solid/stranded; #2 - #8 Al stranded
2
4
Tap #10 - #14 Cu solid/stranded; #10 - #14 Al stranded
Tap #10 - #14 Cu solid/stranded; #10 - #12 Al stranded
1
A-40
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Waterproof Breakaway Steetlight Connector & Splice Insulating Kits
■ Safe and easy installation in five minutes or less
■ No special equipment necessary – requires only a knife, wire stripper and crimp
tool
■ Unique wire entry port, cut-off design accommodates industry’s widest range of
insulation diameters
■ Fewer parts than competitive brands for better waterproof protection
■ Built-in break-away design eliminates de-energization of complete circuits
Streetlight Kits
■ Safely separates upon impact without breaking wires – eliminates potential
danger and electrical shock (breakaway models)
■ Unique 2-in-1 one-piece crimp barrel accommodates industry’s widest range
of conductors (breakaway models)
■ Spring-loaded contacts compensate for thermal expansion to maintain integrity
of waterproof connection (breakaway models)
Application
Guide
For Poles with Transformer Bases, Standard Bases and Junction Boxes
Underground Feed Phase to Phase
Configurations
• D65 dual in-line for phases and two 84 or 84S kits for taps
• Two 82 or 82S Y-Tap Kits for phases and taps
• Two BTS4 B-CAP® Twist & Seal Wire Connectors
Examples of Several
Kit Configurations
Comments
Recommended
Cost-effective
Non-breakaway, small gauge (8 AWG and above).
See Wire Connector section.
Underground Feed Phase to Neutral
Configurations
• D65PN dual in-line for phase and neutral and
Two 84 or 84S kits for tap
• One 82 or 82S Y-Tap Kit for phase and tap and
one 83 or 83S Y-Tap Kit for neutral and tap
• Two BTS4 B-CAP® Twist and Seal Wire Connectors
Comments
Recommended configuration
Cost-effective
Non-breakaway, small gauge (8 AWG and above).
See Wire Connector section.
For Lights Mounted to Utility Poles, etc...
Overhead Feed
• Two B-Tap® Insulation Piercing Connectors for
phase and/or tap (for insulated conductors only)
Transformer
Recommended configuration, see B-Tap®
Insulation Piercing Connectors in this catalog.
Phase to Phase
Two 65 or one D65
to Fuse (Phases)
84 or 84S for Taps
Transformer
End of Run
Two 82 or 82S for
Phase (fuse)
or
D65 for Phases (fuse)
and two 84 or 84S
for Taps
Two 65 or one
D65 to fuse
Tap unnecessary
Transformer
Phase
to Phase
Transformer
1-800-435-0705 for Customer Service
Phase
to Neutral
D65PN for Phase
and Neutral
84 or 84S for Tap
End of run
Phase
to Neutral
82 or 82S for Phase (fuse)
and
83 or 83S for Neutral (common)
65 Kit for Phase (fuse) and
20 Kit for Neutral (common)
or D65PN Kit
www.idealindustries.com
A-41
Ordering Information
Use the following chart and table to determine the correct part number by choosing model, line side, and
load side ordering codes from the shaded columns. See example below, right (Page A-45).
M O D E L
Breakaway In-Line Kits
Line side
Double Ridge
TM
65 Kit
20TM Kit
Line side
White Band Double Ridge
Streetlight Kits
D65TM Kit
Load side
Pin Contact Single Ridge
White Band
Line side
Double Ridge
Load side
Single Ridge
White Band
(Neutral Side)
Fuse
(not included)
TM
82 Kit
Nut
and
Bolt
Line side
insert
82STM Kit
Load side
housing
(Plug)
White Band (Neutral Side)
Crimp-on
flag
terminals
Line side
insert
Line side
housing (receptacle)
Y Insert
Assembly
Application
Electrical
Rating
In-Line Neutral
Non-Fused Breakaway
30 Amp
600 Volt
20 –
In-Line Phase
Fused Breakaway
1/10-30 Amp
600 Volt
65 –
Dual In-Line Phase
Fused Breakaway
1/10-30 Amp
600 Volt
D65 –
Dual In-Line Phase &
Neutral Fused
Breakaway
1/10-30 Amp Phase
30 Amp Neutral
600 Volt
Application
Electrical
Rating
Crimped Phase
Fused Tap & Run
1/10-30 Amp
600 Volt
82 –
Crimp Neutral
Non-Fused Tap & Run
125 Amp Line
30 Amp Load
600 Volt
83 –
Set Screw Phase
Fused Tap & Run
1/10-30 Amp
600 Volt
82S –
Set Screw Neutral
Non-Fused Tap & Run
70 Amp Line
30 Amp Load
600 Volt
83S –
Load side
housing
(Plug)
83STM Kit
Load side
housing
(Plug)
Y Insert
Assembly
Load side
Single Ridge
Nut
and
Bolt
Line side
housing (receptacle)
Crimp-on
flag
terminals
Fuse
(not included)
Metal Pin
Contact
83TM Kit
Breakaway Y-Tap Kits
Line side
housing (receptacle)
Load side
Single Ridge
D65PNTM Kit
Line side
Double Ridge
Line side
housing (receptacle)
Fuse
(not included)
Pin
84TM Kit
84STM Kit
Line side
housing (receptacle)
Crimp-on
ring
terminals
Line side
housing (receptacle)
Terminal
Block
Y Insert
Assembly
Crimp-on Nut
and
flag
terminals Bolt
Line Side Insert
D65PN –
Ordering Code
Load side
housing
(Plug)
Application
Y-Splice Kits
Ordering Code
Crimp Splice
Tap & Run
Electrical
Rating
150 Amp
600 Volt
Set Screw Splice
Tap & Run
70 Amp
600 Volt
Ordering Code
84 –
Load side
housing
(Plug)
84S –
Load side
housing
(Plug)
Excerpts of the 1996 NEC Tables 5 & 5A
Dimensions of Insulated Conductors and Fixture Wires
Approx. Diameter in Inches for Insulation Types:
Size
(AWG)
14
12
10
8
6
4
3
2
1
1/0
RH
RHH,
RHW-2,RHW
0.163
0.182
0.236
0.326
0.364
0.412
0.440
0.472
0.582
0.622
0.193
0.212
0.236
0.326
0.364
0.412
0.440
0.472
0.582
0.622
Approx. Diameter in Inches for
Compact AL with Insulation Types:
TW
THHW
THW,THW-2
THHN
THWN,THWN-2
XHH
XHHW,XHHW-2
THW,THHW
THHN
XHHW
0.133
0.152
0.176
0.236
0.304
0.352
0.380
0.412
0.492
0.532
0.163
0.182
0.206
0.266
0.304
0.352
0.380
0.412
0.492
0.532
0.111
0.130
0.164
0.216
0.254
0.324
0.352
0.384
0.446
0.486
0.133
0.152
0.176
0.236
0.274
0.322
0.350
0.382
0.442
0.482
–
–
–
0.255
0.290
0.335
–
0.390
0.465
0.500
–
–
–
–
0.240
0.305
–
0.360
0.415
0.450
–
–
–
0.224
0.260
0.305
–
0.360
0.415
0.450
National Electric Code ®,Copyright © 1996, National Fire Protection Association, Quincy MA 02269
A-42
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Insulation
Diameter Range
(Inches)
S I D E
Stranded*
Conductor
Size (AWG)
12-6
Type
Copper Crimp
L O A D
Ordering
Code
(CHOOSE 1)
U–
12-6
Aluminum Crimp
UA –
4 or 2
Copper Crimp
LC –
4 or 2
Aluminum Crimp
LA –
.120-.430
Insulation
Diameter Range
(Inches)
.120-.430
Equivalent
Conductor
(See Table)
S I D E
Stranded*
Conductor
Size (AWG)
12-6
Type
Copper Crimp
Ordering
Code
(CHOOSE 1)
U
12-6
Aluminum Crimp
UA
4 or 2
Copper Crimp
LC
4 or 2
Aluminum Crimp
LA
1
NOTE: It is not necessary to use the load side ordering code if it is the same
as the line side code, i.e., a 65U-U is ordered as a 65U.
Insulation
Diameter Range
(Inches)
Ordering
Code
(CHOOSE 1)
.155-.430
ADB
.420-.785
EAFB
.155-.430
ADB
.420-.785
Insulation
Diameter Range
(Inches)
EAFB
Ordering
Code
(CHOOSE 1)
.155-.430
ADB
.420-.785
EAFB
.155-.430
ADB
.420-.785
EAFB
Stranded*
Conductor
Size (AWG)
10
8
6
4
2
1
1/0
10
8
6
4
2
1
1/0
Stranded*
Conductor
Size (AWG)
10
8
6
4
2
1
1/0
10
8
6
4
2
1
1/0
Type
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Ordering
Code
(CHOOSE 1)
6–
4–
3–
2–
1–
0–
10 –
1–
1–
1–
1–
1–
10 –
10 –
Terminal Block
with Set Screws
Copper or Alum.
Conductors
Type
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Ordering
Code
(CHOOSE 1)
6–
4–
3–
2–
1–
0–
10 –
Terminal Block
with Set Screws
Copper or Alum.
Conductors
1–
1–
1–
1–
1–
10 –
10 –
Insulation
Diameter Range
(Inches)
.120 -.430
.120 -.430
Insulation
Diameter Range
(Inches)
.120 -.430
.120 -.430
Equivalent
Conductor
(See Table)
1
Stranded*
Conductor
Size (AWG)
12-6
Type
Copper Crimp
Ordering
Code
(CHOOSE 1)
C
12-6
Aluminum Crimp
A
4 or 2
Copper Crimp
LC
12-6
Copper Crimp
C
12-6
Aluminum Crimp
A
4 or 2
Copper Crimp
LC
4 or 2
Aluminum Crimp
LA
1
Equivalent
Conductor
(See Table)
1
1
Conductor Size
Size (AWG)
10
8
6
4
2
1
10-2
Type
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Copper Crimp
Terminal Block
Copper or
Aluminum
Conductors
Ordering
Code
(CHOOSE 1)
6
4
3
2
1
0
N/A
LR32565
NOTE:
Fused kits require a 13/32” x 1 1/2” fuse. DO NOT USE GLASS OR INDICATING TYPES.
Waterproof or direct burial wire is recommended. THHN is NOT recommended.
* For solid wire: 14-4 AWG, use codes U, UA, C, or A. 2 AWG, use codes LC or LA.
1-800-435-0705 for Customer Service
Example:
A Y-Tap Kit with set screws for a 2 AWG phase line side conductor with a
diameter of .472" and a 10 AWG copper load side conductor is ordered as
an 82S-EAFB1-C.
www.idealindustries.com
A-43
Streetlight Kits
L I N E
Terminal Blocks
BUCHANAN CONSTRUCTION PRODUCTS, INC. offers the industry’s most
comprehensive and accommodating line of terminal blocks. BUCHANAN
terminal blocks make wiring jobs simpler and allow easy ready hook-up of
wires from different components or areas throughout a structure.
■ Wide range of configurations to solve virtually any wiring need
■ Wide wire ranges — 30 AWG to 250 KCMIL (MCM)
Terminal Blocks
■ Easy installation — connect and disconnect quickly making
them perfect for maintenance and troubleshooting applications
■ Versatile, accommodating sectional design
■ Three housing options to meet your specific applications —
nylon, phenolic and polyester
■ Wide selection of contact types
■ Full line of accessories for easy customization
100 Series - Miniature (High Density)
These miniature terminal blocks fit on a much smaller channel to save valuable panel space or
can be surface mounted directly to the panel. Miniature blocks accept wire as large as 12 AWG.
■ No wire crimping required – clamp contacts hold wire from 30 AWG to 12 AWG better
than crimp-on terminals
■ Saves installation time and cost – tubular clamp contacts supplied with captive screws
backed out
■ Nylon housing for rugged applications
■ Positive stop prevents wire from being inserted too far and prevents screw from being tightened on insulation; easy access contact provides
safe, reliable and cost-effective connection
■ Quick installation and change – additional sections may be added or removed without removing channel mounting screw
■ Matte-finish area for marking directly on block
Terminal Block Specifications
Catalog Number 100 Series
Mounting Style
End Section
125
115
130
120
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
WIRE RANGE: Solid or Stranded
Tubular Clamp
1 #12 AWG, 1 #14 AWG, 1 to 3 #16 AWG, 1 to 5 #18 AWG, 1 to 6 #20 AWG,
1 to 7 #22 AWG
100 Series
Housing Material
Maximum Service Temperature
Flammability
Wire Strip Length (in.)
Torque (lbs.)
UL Rating
www.idealindustries.com
115
Nylon
125°C (257°F)
UL94V2
5/16
6-9
28A @ 300V
Wire Range (AWG) Solid & Stranded
30-12
Pitch (in.)
0.25
Terminals per foot
A-44
125
48
1-800-435-0705 for Customer Service
Wire Termination
Miniature - Single Tier HIGH DENSITY
Flat Base
C = .29 + (.25 X N)
L = .51 + (.25 X N)
On Miniature #12 Channel:
Terminal Blocks
CCH = 1.00 + (.25 XA)
LCH = 1.35 + (.25 X A)
A = N when N is even
A = N + 1 when N is odd
N = Number of Miniature Sections
Dovetail Base
C = .35 + (.25 X N)
L = .50 + (.25 X N)
On Standard #60 Channel:
CCH = 2.00 + (.25 XA)
LCH = 2.75 + (.25 X A)
N = Number of Single Tier Sections
On Miniature #12 Channel:
CCH = 1.00 + (.25 XA)
LCH = 1.35 + (.25 X A)
A = N when N is even
A = N + 1 when N is odd
N = Number of Miniature Sections
1-800-435-0705 for Customer Service
www.idealindustries.com
A-45
900 Series Medium Duty
This family of polyester blocks is ideal for high temperature applications.
The rugged material withstands temperatures up to 302°F (150°C)
■ Three contact styles cover broad wire range — accept single wire or
combinations from 22 AWG to 8 AWG solid or stranded
■ Rated at 15A to 50A per circuit
■ Flat base models mount directly to surfaces; dovetail base models
mount on stranded channel
Terminal Blocks
■ Only one end section needed per block assembly
■ Readily identifiable circuits - write directly on matte surface of block
■ Sections snap-fit with Heavy Duty, Intermediate Heavy Duty and Fuse blocks
Specifications
Center-to-Center Spacing: .375 in.
Voltage Rating: 600 Volt max., Current: 50 Amp max.
Ampacity: #8 - #22 AWG
Catalog Number
Mounting Style
921
0921
924
0924
925
0925
930
0930
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
End Section
(Direct Mount)
End Section
(Channel Mount)
Ampacity
15A
50A
30A
—
—
Strap Screw
Tubular Screw
Tubular Clamp
—
—
10-32
Combo Head
8 in./lbs.
10-32
Combo Head
8 in./lbs.
—
—
Screw Torque
6-32
Combo Head
12 in./lbs.
—
—
Wire Range (AWG)
#14 to #22
#8 to #22
#10 to #22
—
—
Contact Type
Screw Type
Housing Material
Polyester (gray)
Contact Material
Copper Alloy, Zinc Plated
Screw Material
Steel, Zinc Plated
Maximum Service Temperature
150°C (302°F)
Flammability
UL94V-0 Rated
LR25557
A-46
www.idealindustries.com
WIRE RANGE: Solid or Stranded
Strap Screw
1 #22 to 1 #14 AWG
Tubular Screw
1 #8 AWG, 1 #10 AWG, 1 to 3 #12 AWG, 1 to 4 #14 AWG, 1 to 4 #16 AWG,
1 to 5 #18 AWG, 1 to 10 #22 AWG
Tubular Clamp
1 #10 AWG, 1 or 2 #12 AWG, 1 to 3 #14 AWG, 1 to 4 #16 AWG, 1 to 5 #18 AWG,
1 to 10 #22 AWG
E63810
1-800-435-0705 for Customer Service
Wire Termination
900 Series
Strap Screw
Direct Mount (Flat Base)
Channel Mount (Dovetail Base)
.427 [10.85]
.427 [10.85]
1.231
[31.27]
1.231
[31.27]
CONTACT STRAP
CONTACT STRAP
1.225 [31.12]
Terminal Blocks
6-32 SCREW
QTY: 2
6-32 SCREW
QTY: 2
1.468 [37.29]
.700
[17.78]
Tubular Screw/Tubular Clamp
Direct Mount (Flat Base)
.700
[17.78]
Channel Mount (Dovetail Base)
.427 [10.85]
.427 [10.85]
1.231
[31.27]
1.231
[31.27]
6-32 SCREW
QTY: 2
10-32 SCREW
QTY: 2
CONTACT STRAP
TUBULAR CONTACT
1.468 [37.29]
1.461 [37.11]
.700
[17.78]
End Section
Direct Mount (Flat Base)
1-800-435-0705 for Customer Service
.700
[17.78]
Channel Mount (Dovetail Base)
www.idealindustries.com
A-47
200 Series - Nylon HEAVY DUTY
This compact design, heavy-duty line accepts single wire or combinations up to
4 AWG, solid or stranded,; 600V UL and NEMA rating.
■ 138 circuits per 6 foot length
■ Three contact styles conservatively rated from 35A to 85A per circuit
■ Two-way flat-base models surface mount directly to the panel or snap-on
miniature channel; dovetail base models mount on standard channel
■ Only one end section needed per block assembly
Terminal Blocks
■ Readily identifiable circuits – mark directly on painted surface of block sections or
use removable marking tape
■ Nylon housing for more rugged applications
■ Sections snap-fit with Phenolic Heavy Duty, Intermediate Heavy Duty and Fuse blocks
Specifications
Center-to-Center Spacing: .50 in. CL: 24 circuits per foot.
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: For a single 4 AWG wire, the maximum amperage recommended is 85A.
Catalog Number
Mounting Style
241
0241
242
0242
243
0243
250
0250
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
End-Section
(Direct Mount)
End-Section
(Channel Mount)
Ampacity
Contact Type
Screw Type
35A
85A
65A
—
—
Strap Screw
Tubular Screw
Tubular Clamp
—
—
10-32 Slotted Binding Head
1/4-28 Slotted Headless
1/4-28 Slotted Headless
—
—
Wire Range (AWG)
#22 to #10
#18 to #4
#18 to #6
—
—
Wire Strip Length
—
1/2 in.
1/2 in.
—
—
Housing Material
Nylon, Type 6/6 unfilled
Contact Material
Copper / Copper Alloy
Screw Material
Maximum Service Temperature
Breakdown Voltage AC, 60Hz
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
Water Absorption (24 hrs. % weight gain)
Flammability
Chemical Resistance
Radiation Resistance (ergs g-1 C)
A-48
www.idealindustries.com
Steel Plated
125°C (257°F)
7000V
470-385 V/mil thickness (per ASTM D149)
0.1 - .35
WIRE RANGE: Solid or Stranded
Strap Screw
1 #22 to 1 #10 AWG
Tubular Screw
1 #4 AWG, 1 #6 AWG, 1 or 2 #8 AWG, 1 to 4 #10 AWG, 1 to 5 #12 AWG, 1 to 6 #14 AWG,
1 to 6 #16 AWG, 1 to 8 #18 AWG
Tubular Clamp
1 #6 AWG, 1 or 2 #8 AWG, 1 to 3 #10 AWG, 1 to 4 #12 AWG, 1 to 4 #14 AWG, 1 to 6 #16
AWG, 1 to 8 #18 AWG
1.5%
94V-2 (per UL94)
Resistant to aromatic hydrocarbons,
strong alkalies
8 x 107
LR25557
E63810
1-800-435-0705 for Customer Service
Wire Termination
200 Series - Nylon HEAVY DUTY
Flat Base (Direct Mount)
C = .56 + (.50 X N)
L = .78 + (.50 X N)
Terminal Blocks
N = Number of circuits
Flat Base Mounted on #12 Miniature Channel
LCH = 1.85 + (.50 X N)
CCH = 1.50 + (.50 X N)
N = Number of Circuits
Dovetail Base Mounted on Standard #60 Channel
LCH = .3.03 + (.50 X N)
CCH = 2.28 + (.50 X N)
N = Number of circuits
1-800-435-0705 for Customer Service
www.idealindustries.com
A-49
200 Series - Phenolic HEAVY DUTY
The family of phenolic heavy duty blocks is ideal for high temperature, high current
applications. The rugged material withstands temperatures up to 302°F (150°C).
■ Sturdy block accepts single wire or combinations up to 4 AWG solid or stranded
■ 122 circuits per 6 foot length
■ Three contact styles conservatively rated to 35A to 85A
■ Only one end section needed per block assembly
Terminal Blocks
■ Readily identifiable circuits – mark directly on painted marking surface or
use removable marking strip
■ Sections snap-fit with Nylon Heavy Duty, Intermediate Heavy Duty
and Fuse Blocks
Specifications
Center-to-Center Spacing: .56 in. CL: 20 circuits per foot.
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: For a single 4 AWG wire, the maximum amperage recommended is 85A.
Catalog Number
Mounting Style
221
0221
222
0222
223
0223
230
0230
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
End-Section
(Direct Mount)
End-Section
(Channel Mount)
Ampacity
Contact Type
Screw Type
35A
85A
65A
—
—
Strap Screw
Tubular Screw
Tubular Clamp
—
—
1/4-28 Slotted Headless
1/4-28 Slotted Headless
—
—
10-32 Slotted Binding Head
Wire Range (AWG)
#22 to #10
#18 to #4
#18 to #6
—
—
Wire Strip Length
—
1/2 in.
1/2 in.
—
—
Housing Material
Phenolic, Filled, Flame retardant
Contact Material
Copper / Copper Alloy
Screw Material
Maximum Service Temperature
Breakdown Voltage AC, 60Hz
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
Water Absorption (24 hrs. % weight gain)
Flammability
Chemical Resistance
Radiation Resistance (ergs g-1 C)
Steel Plated
150°C (302°F)
7000V
300V/mil thickness (per ASTM D149)
.49 - .59
WIRE RANGE: Solid or Stranded
Strap Screw
1 #18 to 1 #8 AWG
Tubular Screw
1 #4 AWG, 1 #6 AWG, 1 or 2 #8 AWG, 1 to 4 #10 AWG, 1 to 5 #12 AWG, 1 to 6 #14 AWG,
1 or 6 #16 AWG, 1 to 8 #18 AWG
Tubular Clamp
1 #6 AWG, 1 or 2 #8 AWG, 1 to 3 #10 AWG, 1 to 4 #12 AWG, 1 to 4 #14 AWG, 1 to 6 #16
AWG, 1 to 8 #18 AWG
45% (per ASTM D570)
94V-1 (per UL94)
Resistant to acids, alkalies, aliphatic
hydrocarbons and ketones (per ASTM D5343)
2.7 x 108 min.
LR25557
A-50
www.idealindustries.com
E63810
1-800-435-0705 for Customer Service
Wire Termination
200 Series - Phenolic HEAVY DUTY
Flat Base (Direct Mount)
C = .59 + (.57 X N)
L = .81 + (.57 X N)
Terminal Blocks
N = Number of circuits
Dovetail Base Mounted on Standard #60 Channel
CCH = 2.31 + (.57 X N)
LCH = 3.06 + (.57 X N)
N = Number of circuits
1-800-435-0705 for Customer Service
www.idealindustries.com
A-51
Nylon INTERMEDIATE HEAVY DUTY
The 800 Series line of 600V blocks is conservatively rated up to 150A for a
single 1/0 AWG copper wire.
■ Exceptionally compact block accepts single wire or combinations up to 1/0 AWG
■ 92 circuits per 6 foot length
■ Tubular screw contact style accepts AWG sizes from 12 to 1/0, solid or stranded
■ Two-way mounting base fits standard channel or mounts directly to flat surfaces
Terminal Blocks
■ Only one end section needed per block assembly
■ Readily identifiable circuits – write directly on painted marking surface or use removable vinyl
marking strip
■ Nylon housing for rugged applications, 7/16 -20 slotted headless screws
■ Snap-fit with Heavy-Duty Nylon and Phenolic and Fuse Blocks
Specifications
Center-to-Center Spacing: .75 in. CL: 16 circuits per foot.
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA standards for general industrial control
equipment and panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: For a single 1/0 AWG copper wire, the maximum amperage recommended is 150A.
Catalog Number
824
830
Two-Way
Mounting Base
End Section
150A
—
Contact Type
Tubular Screw
—
Screw Type
7/16-20 Slotted Headless
—
Wire Range (AWG)
12 to 1/0
—
Wire Strip Length
11/16 in.
—
Mounting Style
Ampacity
Housing Material
Nylon, Type 6/6 Unfilled
Contact Material
Copper
Screw Material
Steel, Zinc-Plated
Maximum Service Temperature
Breakdown Voltage AC, 60Hz
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
125°C (257°F)
8800V
470-385V/mil thickness (per ASTM D149)
.01 - .35
Water Absorption (24 hrs. % weight gain)
1.5%
Flammability
94V-2
Chemical Resistance
Radiation Resistance (ergs g-1 C)
A-52
www.idealindustries.com
WIRE RANGE: Solid or Stranded
Tubular Screw
1 #1/0 AWG, 1 #1 AWG, 1 #2 AWG, 1 or 2 #4 AWG, 1 to 3 #6 AWG, , 2, 3 or 5 #8 AWG,
1 to 6 #10 AWG, 1 to 7 #12 AWG
Resistant to aromatic hydrocarbons,
strong alkalies
8 x 107
LR25557
E63810
1-800-435-0705 for Customer Service
Wire Termination
Phenolic HEAVY DUTY
Flat Base (Direct Mount)
C = .59 + (.75 X N)
L = .81 + (.75 X N)
Terminal Blocks
N = Number of circuits
Dovetail Base Mounted on Standard #60 Channel
CCH = 2.31 + (.75 X N)
LCH = 3.06 + (.75 X N)
N = Number of circuits
LR25557
1-800-435-0705 for Customer Service
www.idealindustries.com
E63810
A-53
Phenolic ULTRA HEAVY DUTY - 250 KCMIL (MCM)
This Ultra Heavy Duty line is rated up to 255 amps with a single 250 MCM conductor.
■ Compact block accepts wire sizes up to 2/0 or 250 KCMIL (MCM)
■ 57 circuits per 6 foot length
■ Tubular screw contact style for maximum electrical rating
■ Block mounts directly on flat surface or standard channel
■ Only one end section needed per block assembly
Fuse & Switch
■ Readily identifiable circuits – write directly on painted marking area or use removable vinyl
marking strip
■ Hex socket screws allow maximum torque when using large wire sizes
■ High current capacity snap-fit sectional blocks do not snap-fit with other block styles
Specifications
Center-to-Center Spacing: 1.19 in. CL: 9 circuits per foot.
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: For a single 250 KCMIL wire, the maximum amperage recommended is 255A.
Catalog Number
Mounting Style
426
427
430
Two-Way
Mounting Base
Two-Way
Mounting Base
End-Section
Ampacity
175A
255A
—
Contact Type
Tubular Screw
Tubular Screw
—
Screw Type
1/2-30 Hex Socket
3/4-16 Hex Socket
—
Wire Range (AWG)
#12-2/0
#6-250 KCMIL/MCM
—
Wire Strip Length
1 in.
1 in.
—
Housing Material
Phenolic, Filled, Flame retardant
Contact Material
Copper
Screw Material
Maximum Service Temperature
Breakdown Voltage AC, 60Hz
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
Water Absorption (24 hrs. % weight gain)
Flammability
Chemical Resistance
Radiation Resistance (ergs g-1 C)
A-54
www.idealindustries.com
Steel Plated
150°C (302°F)
10000V
300V/mil thickness (per ASTM D149)
WIRE RANGE: Solid or Stranded
Tubular Screw
1 #2/0 AWG, 1 #1/0 AWG, 1 #1 AWG, 1 or 2 #2 AWG, 1 to 3 #4 AWG, 1 to 3 #6 AWG,
1 to 4 #8 AWG, 1 to 6 #10 AWG, 2 to 8 #12 AWG
Tubular Screw
1 #250 KCMIL, 1 $4/0 AWG, 1 #3/0 AWG, 1 or 2 #2/0 AWG, 1 or 2 #1/0 AWG,
1 or 2 #1 AWG, 1 to 3 #2 AWG, 1 to 4 #4 AWG, 1 to 5 #6 AWG
.49 - .58
0.45% (per ASTM D570)
94V-1 (per UL94)
Resistant to acids, alkalies and aliphatic,
hydrocarbons and ketones (per ASTM D543)
2.7 x 108 min.
LR25557
E63810
1-800-435-0705 for Customer Service
Wire Termination
Phenolic HEAVY DUTY
Flat Base Mounted on Standard #60 Channel
C = 1.19 + (1.19 X N)
L = 1.40 + (1.19 X N)
CCH = 2.90 + (2.90 X N)
LCH = 3.65 + (3.65 X N)
Terminal Blocks
N = Number of circuits
1-800-435-0705 for Customer Service
www.idealindustries.com
A-55
Nylon Fuse Blocks
■ Provide in-line circuit protection for any circuit or group of circuits
■ Three contact styles for terminated or unterminated wire are conservatively rated to 30A
■ Remove, check and replace fuses safely and quickly
■ Switch-action fuse blocks open circuits before fuse can be removed or installed
■ Good circuit density when mounted adjacently – 91 circuits per 6 foot length
■ Nylon housing for more rugged applications
Terminal Blocks
■ Dovetail base mounts on standard channel; can also be mounted on flat surfaces
■ Only one end section needed per block assembly
■ Open or close several circuits simultaneously – holes in puller handles allow use of nylon “ganging” rods
■ Readily identifiable circuits – mark directly on white, matte-surface puller assembly, marking tab on block or use removable marking tape
■ Sections snap-fit with Heavy Duty and Intermediate Heavy Duty Blocks
Specifications
Center-to-Center Spacing: .75 in. CL: 16 circuits per foot.
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: Fuse blocks, 30A
Fuse Size: Any 13/32 in. x 1-1/2 in. ferrule-type cartridge fuse up to 30A, indicating, which meets Mil. Spec. F-15160 is recommended.
Catalog Number
Mounting Style
0311
0318
0312
0380
Channel Mount
(Dovetail Base)
Channel Mount
(Dovetail Base)
Channel Mount
(Dovetail Base)
End-Section
Ampacity
30A
30A
30A
—
Contact Type
Strap Screw
Strap Clamp
Tubular Screw
—
Screw Type
10-32 Binding Head
8-32 Pan Head w/Clamp
1/4-28 Set Screw
—
Wire Range (AWG)
#22 to #8
#18 to #8
#18 - #8
—
Wire Strip Length
—
1/2 in.
1/2 in.
—
Housing Material
Nylon
Contact Material
Aluminum Alloy
Screw Material
Maximum Service Temperature
Breakdown Voltage AC, 60Hz
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
Water Absorption (24 hrs. % weight gain)
Flammability
Chemical Resistance
Radiation Resistance (ergs g-1 C)
A-56
www.idealindustries.com
Steel Plated
125°C (257°F)
WIRE RANGE: Solid or Stranded
Tubular Screw
1 #1/0 AWG, 1 #1 AWG, 1 #2 AWG, 1 or 2 #4 AWG, 1 to 3 #6 AWG, , 2, 3 or 5 #8 AWG,
1 to 6 #10 AWG, 1 to 7 #12 AWG
7400V
470-385V/mil thickness (per ASTM D149)
.01 - .35
1.5% (per ASTM D570)
94V-2 (per UL94)
Resistance to aromatic hydrocarbons,
strong alkalies
8 x 107
LR25557
E63810
1-800-435-0705 for Customer Service
Wire Termination
Nylon Fuse Blocks
Dovetail Base Mounted on Standard #60 Channel (may also be mounted direct)
C = .56 + (.75 X N)
L = .78 + (.75 X N)
CCH = 2.28 + (.75 X N)
LCH = 3.03 + (.75 X N)
1-800-435-0705 for Customer Service
Terminal Blocks
N = Number of circuits
www.idealindustries.com
A-57
Phenolic Fuse Blocks
■ Provide in-line circuit protection for any circuit or group of circuits
■ Three contact styles for terminated or unterminated wire are conservatively rated to 30A
■ Remove, check and replace fuses safely and quickly – switch-action fuse blocks open
circuits before fuse can be removed or installed
■ Good circuit density when mounted adjacently – 91 circuits per 6 foot length
■ Use in high temperature applications – phenolic housing withstands temperatures
up to 302°F (150°C)
Terminal Blocks
■ Flat base models for surface mounting, dovetail base models for standard channel
■ Only one end section needed per block assembly
■ Open or close several circuits simultaneously – holes in puller handles allow use of nylon “ganging” rods
■ Readily identifiable circuits – mark directly on white, matte-surface puller assembly, marking tab on block or use removable marking tape
■ Sections snap-fit with Heavy Duty and Intermediate Heavy Duty Blocks
Specifications
Center-to-Center Spacing: .75 in. CL: 16 circuits per foot.
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: Fuse blocks, 30A
Fuse Size: Any 13/32 in. x 1-1/2 in. ferrule-type cartridge fuse up to 30A, indicating or non-indicating, which meets MIL. Spec. F-15160 is
recommended.
Catalog Number
Mounting Style
351
0351
358
0358
352
0352
330
0330
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
Direct Mount
(Flat Base)
Channel Mount
(Dovetail Base)
End-Section
(Direct Mount)
End-Section
(ChannelMount)
Ampacity
30A
30A
30A
—
—
Contact Type
Strap Screw
Strap Clamp
Tubular Screw
—
—
Screw Type
10-32
Binding Head
8-32 Pan
Head w/Clamp
1/4-28
Set Screw
—
—
Wire Range (AWG)
#22 to #8
#18 to #8
#18 - #8
—
—
Wire Strip Length
—
1/2 in.
1/2 in.
—
—
Housing Material
Phenolic, Filled, Flame retardant
Contact Material
Copper alloy
Screw Material
Maximum Service Temperature
Breakdown Voltage AC, 60Hz
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
Water Absorption (24 hrs. % weight gain)
Flammability
Chemical Resistance
Radiation Resistance (ergs g-1 C)
A-58
www.idealindustries.com
Steel Plated
150°C (302°F)
WIRE RANGE: Solid or Stranded
Tubular Screw, Cat. No. 362 and 0362
1 #4 AWG, 1 #6 AWG, 1 or 2 #8 AWG, 1 to 4 #10 AWG, 1 to 5 #12 AWG, 1 to 6 #14
AWG, 1 to 6 #16 AWG, 1 to 8 #18 AWG
8400V
300V/mil thickness (per ASTM D149)
.49 - .58
0.45% (per ASTM D570)
94V-1 (per UL94)
Resistance to acids, alkalies and aliphatic
hydrocarbons and ketones (per ASTM D543)
2.7 x 107 min.
LR25557
E63810
1-800-435-0705 for Customer Service
Wire Termination
Phenolic Fuse Blocks
Flat Base (Direct Mount)
C = .59 + (.75 X N)
L = .81 + (.75 X N)
Terminal Blocks
N = Number of circuits
Dovetail Base Mounted on Standard #60 Channel
CCH = 2.31+ (.76 X N)
LCH = 3.06 + (.76 X N)
N = Number of circuits
LR25557
1-800-435-0705 for Customer Service
www.idealindustries.com
E63810
A-59
Phenolic One Piece
Traditional standard in the heavy industrial, rail transport, utility and traffic control industries. The rugged, one-piece construction finds wide
application in dirty and fibration-prone environments.
■ Two, four, six, eight and twelve circuit models
■ Strap screw contacts accept wire 8 AWG and smaller and are rated to 50 Amps
■ Dovetail base mounts on standard size channel
■ Pilot point screws with strap screw contacts speed installation time
Terminal Blocks
■ Easily identifiable circuits with use of plain white marking strip
■ No assembly required - each block is a single, easily installed unit
Specifications
Center-to-Center Spacing: .63 in. CL
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstand voltages greatly in excess of IEEE switchgear standards for 750V.
Ampacity: For a single 8 AWG wire, the maximum amperage recommended is 50A.
Catalog Number
Mounting Style
Number of Circuits
B102
B104
B106
B108
B112
Two-Way
Mounting Base
Two-Way
Mounting Base
Two-Way
Mounting Base
Two-Way
Mounting Base
Two-Way Mount
Mounting Base
2
4
6
8
12
50A
50A
50A
50A
50A
Contact Type
Strap Screw
(Steel)
Strap Screw
(Steel)
Strap Screw
(Steel)
Strap Screw
(Steel)
Strap Screw
(Steel)
Screw Type
10-32
Binding Head
10-32
Binding Head
10-32
Binding Head
10-32
Binding Head
10-32
Binding Head
#18 to #8
#18 to #8
#18 to #8
#18 to #8
#18 to #8
Ampacity
Wire Range (AWG)
Housing Material
Phenolic, Filled, Flame retardant
Contact Material
Copper / Copper Alloy
Screw Material
Steel Plated
Maximum Service Temperature
Dielectric Strength (RH40% at sea level)
UL High Voltage Arc Testing (in./min.)
Water Absorption (24 hrs. % weight gain)
Flammability
Chemical Resistance
Radiation Resistance (ergs g-1 C)
A-60
Wire Termination
WIRE RANGE: Solid or Stranded
Strap Screw
1 #18 AWG through 1 #8 AWG
150°C (302°F)
300V/mil thickness (per ASTM D149)
.49 - .58
0.45% (per ASTM D570)
94V-1 (per UL94)
Resistance to acids, alkalies and aliphatic
hydrocarbons and ketones (per ASTM D543)
2.7 x 107 min.
LR25557
E63810
Dimensions
No. of
Circuits
2
4
6
8
12
C
L
1.63
2.88
4.13
5.38
7.88
2.0
3.25
4.50
5.75
8.25
Wire Termination
Phenolic One Piece
Dovetail Base Mounted on Standard #60 Channel
Strap Screw (Steel)
C
C
2
1.63
2.0
4
2.88
3.25
6
4.13
4.50
8
5.38
5.75
12
7.88
8.25
L
Terminal Blocks
0.91
No. of
Circuits
0.63
0.41
1.25
L
1.25
0.38
2.00
1-800-435-0705 for Customer Service
www.idealindustries.com
A-61
Mounting Channels
Miniature Channel
Accessories
Mounting Channels
Steel Channel
Steel Channel (Breakaway)
Length
Cat. No.
Miniature Channel
3 ft.
12
Heavy Duty (200 Series)
Steel Channel
6 ft.
3 ft.
60
63
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Steel Channel (Breakaway)
3 ft.
60B36
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Aluminum Channel (Pre-punched)
6 ft.
3 ft.
64
67
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Aluminum Channel (Pre-punched)
For use with:
Channel Clamps
Channel Clamps
Cat. No.
For use with:
Miniature Clamp
11
High Density Miniature (100 Series)
Heavy Duty (200 Series)
Snap-in Clamp
62
High Density Miniature (100 Series)
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Universal Clamp
68
High Density Miniature (100 Series)
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Universal Clamp
61
High Density Miniature (100 Series)
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Miniature Clamp
Universal Clamp
A-62
www.idealindustries.com
Snap-in Clamp
Screw Clalmp
1-800-435-0705 for Customer Service
Wire Termination
Covers
#23
Description
Cat. No.
Terminal Block
#71
Available for:
13
High Density Miniature (100 Series)
23
Heavy Duty (200 Series)
Heavy Duty-Phenolic (200 Series)
71
Medium Duty (900 Series)
Accessories
#13
Jumpers
Jumper for Tubular Contacts
Jumper for Strap Screw
Cat. No.
Jumpers for Tubular Contacts
1-800-435-0705 for Customer Service
Snap-apart Jumper
Available for:
41
Heavy Duty-Phenolic (200 Series)
42
Heavy Duty (200 Series)
43
Heavy Duty-Phenolic (200 Series)
70
Medium Duty (900 Series)
73
Medium Duty (900 Series)
www.idealindustries.com
A-63
Notes:
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
Notes
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
A-64
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
B
Selecting
Fish Tape
Material
Push Long Distance
Pulling Strength
Omni-Directional Push
Non-Corrosive
Non-Conductive
Blued Steel
Stainless
S®-Class
Gold-Fish®
Best
Zoom™
Worst
Selection Guide
■
Unique finish is non-oily and resists rust
■
Stiffer for long runs
■
Multiple options in width, length and
eyelet for ease of use
■
Highest grade carbon steel
■
Tensile strength 1,600 lbs.
■
Industry’s straightest wire
■
Won’t rust or corrode in damp locations
or humid environments
■
Great for wet or corrosive work environment
■
Smoother pay-out
■
Super clean finish prevents marks on
walls or carpets
■
Tensile strength 1,600 lbs.
■
Brass-plated coiled steel resists rust
■
Kink proof
■
No “memory” – hangs straight after being
coiled for long periods
■
Excellent for multiple bends
■
19 strands of stainless steel
■
■
Ultrahard nylon jacket adds slipperiness,
protects cables and the user’s hands
Excellent for multiple bends or wet/corrosive
work environment
■
The only one in the industry
■
Excellent for corrogated plastic conduit
19 strand twisted radial steel core encased
in high molecular density outer jacket.
S-Class
™
E-Glass
3 radius
B-2
www.idealindustries.com
■
Non-conductive tape designed for use
around live circuits
■
Smooth nylon jacket provides great
handling around bends
■
Strong S-Class® core for longer life and
greater pushing power
■
Omni-directional pushing
Minimum allowable bend for 3⁄8 conduit
is 3.5 radius. Superior flexibility for tight
bends in conduit runs.
1-800-435-0705 for Customer Service
Wire Installation
Length
Width &
Thickness
Case
Diameter
Blued Steel
25
1/8 in. x .045 in.
7 in.
50
1/8 in. x .045 in.
7 in.
50
1/8 in. x .060 in.
9 in.
60
1/8 in. x .060 in.
12 in.
100
1/8 in. x .060 in.
12 in.
120
1/8 in. x .060 in.
12 in.
200
1/8 in. x .060 in.
12 in.
240
1/8 in. x .060 in.
12 in.
500
1/8 in. x .060 in.
None
700
1/8 in. x .060 in.
None
50
1/4 in. x .060 in.
12 in.
100
1/4 in. x .060 in.
12 in.
200
1/4 in. x .060 in.
12 in.
300
1/4 in. x .060 in.
None
400
1/4 in. x .060 in.
None
600
1/4 in. x .060 in.
None
750
1/4 in. x .060 in.
None
1,000
1/4 in. x .060 in.
None
10,000
1/4 in. x .060 in.
None
Stainless Steel
120
1/8 in. x .060 in.
12 in.
240
1/8 in. x .060 in.
12 in.
S-Class® Nylon Jacketed Fiberglass
50
3/16 in. diameter
12 in.
50
3/16 in. diameter
12 in.
100
3/16 in. diameter
12 in.
100
3/16 in. diameter
12 in.
200
3/16 in. diameter
16 in.
200
3/16 in. diameter
16 in.
300
3/16 in. diameter
None
400
3/16 in. diameter
None
500
3/16 in. diameter
None
Gold-Fish® Brass Plated Steel Coil
25
3/16 in. diameter
None
50
3/16 in. diameter
12 in.
100
3/16 in. diameter
None
Zoom™ Nylon Jacketed Stainless Steel
50
3/16 in. diameter
12 in.
100
3/16 in. diameter
12 in.
200
3/16 in. diameter
16 in.
End Type
Tuff-Grip™
Pro
Rapid-Pak®
ThumbWinder™
Replacement
Tapes
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
Formed hook
–
–
31-033**
31-055
–
31-056
–
31-057
–
–
31-058
31-059
–
–
–
–
–
–
–
–
–
–
–
31-081†
–
31-098†
–
–
–
31-012
31-010
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
31-035
31-036
31-036
31-038
31-038
31-3380
31-3379
31-051
31-050
31-052
31-2127
31-2128
31-2980
31-2139
31-3384
31-2982
Formed hook
Formed hook
31-066
31-067
–
–
–
–
31-073
31-074
Leader
Eyelet
Leader
Eyelet
Leader
Eyelet
Eyelet
Eyelet
Eyelet
31-060
31-062
31-061
31-063
31-064*
31-065*
–
–
–
31-187†
31-190†
31-186†
31-189†
31-207†
31-208†
–
–
–
–
–
–
–
–
–
–
–
–
31-150
31-160
31-152
31-162
31-155
31-165
31-2138
31-400
31-3370
Eyelet
Eyelet
Eyelet
–
31-144
–
–
–
–
–
–
–
31-140
31-141
31-142
Eyelet
Eyelet
Eyelet
31-090
31-092
31-096*
–
–
–
–
–
–
31-091
31-093
31-097
Selection Guide
Fish Tape Selection Guide
*16 in. diameter Tuff-Grip™ Case † 16 in. diameter Rapid-Pak® Case
**9 in. diameter Tuff-Grip™ Pro Case
Description
Cat. No.
Description
Cat. No.
Fish Tape Leader for steel or stainless steel tapes
31-148
Fish Tape Swivel Ball
31-085
Fish Tape Leader for S-Class® Fiberglass
31-159
Replacement Eyelets (4) for S-Class®
31-158
Multi-Wire Pulling Leader – 6-loop
31-146
Replacement Eyelets (2) for Zoom
31-094
Multi-Wire Pulling Leader – 4-loop
31-147
1-800-435-0705 for Customer Service
™
www.idealindustries.com
B-3
Tuff-Grip™ Pro Fish Tapes
■ Tuff-Cuff™ tape retaining feature keeps tape properly
positioned in the opening
■ Full-perimeter handle band helps keep dirt and moisture out,
prolonging life
■ Easier to install replacement tapes
■ Superior pull-out and rewind characteristics
■ Exceptionally durable case and handle
■ Clean contemporary styling
Fish Tapes
■ Large, comfortable ergonomically-designed handle, grasp
from the top or side. Allows for use with gloves.
End Type
Cat. No.
Replacement Tape
Cat. No.
Formed Hook
31-055
31-035
1/8” x .060” x 120’
Formed Hook
31-056
31-036
1/8” x .060” x 240’
Swivel Ball End
31-225
31-038 & 31-085
1/8” x .060” x 240’
Formed Hook
31-057
31-038
1/8” x .060” x 120’
Formed Hook
31-066
31-073
1/8” x .060” x 240’
Formed Hook
31-067
31-074
31-150
Width & Thickness
Blued Steel
1/8” x .060” x 60’
Stainless Steel
S-Class® Nylon Jacketed Fiberglass
3/16” diameter x 50’
Leader
31-060
3/16” diameter x 50’
Eyelet
31-062
31-160
3/16” diameter x 100’
Leader
31-061
31-152
3/16” diameter x 100’
Eyelet
31-063
31-162
3/16” diameter x 50’
Eyelet
31-542
31-552
3/16” diameter x 100’
Eyelet
31-544
31-554
31-144
31-141
Nylon Monofilamet
Gold-Fish® Brass Plated Steel Coil
3/16” diameter x 50’
Eyelet
Zoom™ Nylon Jacketed Stainless Steel
B-4
3/16” diameter x 50’
Eyelet
31-090
31-091
13/16” diameter x 100’
Eyelet
31-092
31-093
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
Tuff-Grip™ Fish Tapes
Thumb Winder™
Fish Tapes
■ Large 16 in. case accommodates
long tape lengths
■ Convenient 7 in. size can be stored in
tool bag
■ Large, comfortable, durable handle
provides secure grip and ease of
use
■ Durable, impact-resistant ABS case
■ Easy-to-use thumb-operated rewind
■ Durable impact-resistant case
■ 1/8 in. x 0.045 in. steel tape
Description
Cat. No.
Steel Tape – 25 ft.
31-012
Steel Tape – 50 ft.
31-010
16 in.
Description
Cat. No.
Replacement
Tape
Cat. No.
S-Class® Fish Tape with Leader – 200 ft.
31-064
31-155
®
S-Class Fish Tape with Eyelet – 200 ft.
31-065
31-165
Zoom™ – 200 ft.
31-096
31-097
Description
Cat. No.
Replacement
Tape
Cat. No.
Blued Steel tape – 100 ft. x 1/8 in. x .060 in.
31-081
31-036
■ Funneled tape opening
reduces kinking and
tape breakage
Blued Steel tape – 200 ft. x 1/8 in. x .060 in.
31-098
31-038
Fiberglass tape w/leader – 50 ft.
31-187
31-150
Fiberglass tape w/leader – 100 ft.
31-186
31-152
■ Reversible, hinged knob
for right- or left-handed
rewinds
Fiberglass tape w/leader – 200 ft.
31-207
31-155
Fiberglass tape w/eyelet – 50 ft.
31-190
31-160
Fiberglass tape w/eyelet – 100 ft.
31-189
31-162
Fiberglass tape w/eyelet – 200 ft.
31-208
31-165
Replacement crank assembly (winder knob)
31-220
—
Zoom™ Fish Tapes
■ Impact-resistant case
■ Unique non-slip
handle with fingertip
grooves
■ Omni-directional,
round cable design
31-092
Description
Cat. No.
Replacement
Tape
Cat. No.
Zoom™ Fish Tape – 50 ft.
31-090
31-091
Zoom™ Fish Tape – 100 ft.
31-092
31-093
Zoom™ Fish Tape – 200 ft.
31-096
31-097
Rapid-Pak® Fish Tapes
■ Inner rotating reel with
winding knob retrieves
tape faster than
traditional fish tapes for
increased labor savings
■ Stationary handle for
extra durability
■ Textured case surface provides positive grip
16 in.
■ Impact-resistant plastic case
1-800-435-0705 for Customer Service
www.idealindustries.com
B-5
Fish Tapes
7 in.
Wire Installation
S-Class® Fiberglass and Zoom™ Fish Tape
Field Application Kits
Fish Tape Leaders
■ Crimps on new eyelet or leader
in minutes
■ Dies can be used with
Crimpmaster™ Crimp Tool
■ Guides fish tape around bends in conduit
■ Handles up to six 10 AWG bare wires
Fish Tape Accessories
■ Connection guaranteed
to withstand 500 lbs.
■ Pulls up to 500 lbs.
Description
Cat. No.
Fish Tape Leader for steel or stainless steel tapes
31-148
Fish Tape Leader for S-Class® Fiberglass Fish Tape
31-159
Fish Tape Swivel Ball
Description
Cat. No.
Field Application Kit includes:
Crimpmaster™ Crimp Tool frame, die set, S-Class® eyelets (2),
S-Class® leaders (2), Zoom™ eyelets (2) & instant adhesive
31-156
Die Set Kit* includes: eyelets (2), leaders (2)
& instant adhesive
31-164
Replacement eyelets (4) for S-Class® Fish Tape
31-158
■ Designed for use on 1/8 in. steel or
stainless steel tape
Replacement eyelets (2) for Zoom™ Fish Tape
31-094
Replacement leaders (4) for S-Class® Fish Tape
31-159
■ Eyelet holds up to four 10 AWG
bare wires
Die Set Only
31-166
■ Swivels to prevent wires from twisting
during pull
*For those who already have a Crimpmaster™ Crimp Tool
Description
Cat. No.
Fish Tape Swivel Ball
31-085
Puller for S-Class® Fiberglass Fish Tapes
■ Non-slip material securely grips
fiberglass without damaging
material
Fish Tape Replacement
Cases
■ Durable impactresistant case
■ Easy to install
replacement tapes
■ Full-perimeter
handle band helps
prolong life by keeping
more dirt and moisture out
■ Fits into standard 12 in.
fish tape case opening
when not in use
Description
Cat. No.
Fish Tape Puller
31-170
■ Large, ergonomically designed
handle allows for a comfortable
grasp from the top or side, and
for use with gloves
Screws sold separately, case
requires four LA-4218.
Multi-Wire Pulling Leaders
Description
■ Pulls multiple wires at
one time
12” Tuff-Grip™ Pro Replacement Case
K-8985
Replacement Screws
LA-4218
31-146
■ Staggered connection
points prevent bunching
or hang-ups in tight bends
31-147
■ 500 lb. working strength at
main eyelet and up to 150 lbs.
with each individual eyelet
WARNING
Description
Cat. No.
Multi-Wire Pulling Leader – 6-loop
31-146
Multi-Wire Pulling Leader – 4-loop
31-147
B-6
www.idealindustries.com
Cat. No.
Always use approved safety glasses when using this product.
Do not use near energized equipment. Electrical shock may occur. Make sure all power is off.
Do not use pliers or other tools that may kink, damage, or weaken any round fish tapes such
as S-Class®, Nylon or Zoom™. Use only a fish tape puller designed for this purpose.
While fish tapes made of fiberglass, nylon or other composite materials are non-conductive,
they may have a metal eyelet that is conductive and could be grounded against conduit. Do
not use on live electrical circuits.
Do not attempt to use fish tape that is fractured or has multiple ends.
Keep the fish tape wound in the reel to prevent damage to the tape.
Use this product in a safe work position to prevent loss of balance.
Never remove the screws from case while fish tape is coiled inside the reel.
Failure to follow instructions may result in severe bodily harm or damage to property.
1-800-435-0705 for Customer Service
Wire Installation
Tuff-Rod™ Fishing Poles
■ Strong, lightweight, flexible extendable fiberglass rod kits
■ Use to reach and pull wires over suspended ceilings, in cable trays
or through interior walls
Fishing Poles
■ Packaged in clear tubes for protection and long-term storage
White
Glow
Tuff-Rod™ Regular Flex
Tuff-Rod™ Extra Flex Glow
■ 1/4 in. white fiberglass
■ 3/16 in. pale green luminescent fiberglass
■ Extra stiffness for added control when maneuvering wires
■ Glow-in-the-dark material for easy use in attics, basements
and other dim lit areas
Description
Cat. No.
Description
Cat. No.
12 ft. kit with fixed bullet nose and threaded J hook
(3 ea. 4 ft. sections)
31-611
12 ft. kit with fixed bullet nose and threaded J hook
(3 ea. 4 ft. sections)
31-631
24 ft. kit with fixed bullet nose and threaded bullet nose
(4 ea. 6 ft. sections)
31-612
30 ft. kit with fixed bullet nose and threaded bullet nose
(5 ea. 6 ft. sections)
31-633
12 pack of 1/4 in. x 4 ft. Regular Flex Replacement Rods
31-643
12 pack of 3/16 in. x 4 ft. Extra Flex Glow Replacement Rods
31-647
12 pack of 1/4 in. x 6 ft. Regular Flex Replacement Rods
31-644
12 pack of 3/16 in. x 6 ft. Extra Flex Glow Replacement Rods
31-648
Accessory Kits
■ Includes replacement
heads, one threaded
bullet nose, one
threaded J hook
and one threaded
wisk
Description
Cat. No.
3/16 in. Accessory kit
31-651
1/4 in. Accessory kit
31-652
1-800-435-0705 for Customer Service
www.idealindustries.com
B-7
Select-a-Lubricant
Commercial Wire Pulling
Utility Cable Pulling
Lubricants
Finished
Construction
New
Construction
New
Construction
Indoors or
Outdoors
Indoors or
Outdoors
Indoors or
Outdoors
Indoors or
Outdoors
Outdoors
ONLY
Outdoors
Indoors or
Outdoors
40°F - 120°F
4°C - 49°C
40°F - 120°F
4°C - 49°C
40°F - 120°F
4°C - 49°C
40°F - 120°F
4°C - 49°C
-28°F - 40°F
-33°C - 4°C
40°F - 120°F
4°C - 38°C
40°F - 140°F
4°C - 82°C
Up to 75 ft.
Up to 8 hrs.
Up to 1,200 ft.
Up to 24 hrs.
Up to 1,200 ft.
Up to 24 hrs.
Up to 250 ft.
Up to 24 hrs.
Up to 250 ft.
Up to 72 hrs.
Up to 250 ft.
Up to 24 hrs.
Up to 250 ft.
Up to 24 hrs.
ClearGlide™
Yellow 77®
Yellow 77®
Plus
Aqua-Gel® II
Aqua-Gel® CW
Aqua-Gel®
IIP
Velocity™
Wire Pulling Lubricant Selection Guide
Base
Average Coefficient of Friction*
ClearGlide™
Wire Pulling
Lubricant
Yellow 77®
Wire Pulling
Lubricant
Yellow 77® Plus
Wire Pulling
Lubricant
Aqua-Gel® ll
Cable Pulling
Lubricant
Aqua-Gel® CW
Cable Pulling
Lubricant
Aqua-Gel® IIP
Cable Pulling
Lubricant
Velocity™
Wire Pulling
Lubricant
Polymer
Wax
Wax
Polymer
Polymer
Polymer
Polymer
.17
.08
.16
.11
.07
.11
.14
Safe Storage
Temperature Range
32°F – 180°F
(0°C – 82°C)
32°F – 130°F
(0°C – 54°C)
32°F – 190°F
(0°C – 88°C)
32°F – 180°F
(0°C – 82°C)
-28°F – 190°F
(-33°C – 82°C)
32°F – 180°F
(0°C – 82°C)
40°F – 140°F
(4°C – 82°C)
Application Temperature Range
40°F – 100°F
(4°C – 38°C)
40°F – 100°F
(4°C – 38°C)
40°F – 100°F
(4°C – 38°C)
40°F – 100°F
(4°C – 38°C)
-28°F – 40°F
(-33°C – 4°C)
40°F – 100°F
(4°C – 38°C)
25°F – 140°F
(-3.9°C – 60°C)
COMPATIBILITY (Cable Types):
Rubber
•
•
•
•
•
•
•
Neoprene
•
•
•
•
•
•
•
Nylon
•
•
•
•
•
•
•
PVC
•
•
•
•
•
•
•
High-density or cross-linked
polyethylene
•
•
•
•
•
•
•
Low-density polyethylene
•
•
•
•
•
•
Semiconducting jacket
•
•
•
•
•
•
Hypalon
•
•
•
•
•
•
•
*Results from Falex Corporation, an independent testing agency specializing in tribology tests, using the Falex-ISC On Disk Tribmeter System machine with the ASTM G99
modified method.
B-8
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
Yellow 77® Plus Wire Pulling Lubricant
■ Rapid Glide™ polytetrafluoroethylene additive provides greater
lubricity than other wax-based lubricants — great for tough pulls
■ Safe to use with all cable types
■ Clings to cable throughout long runs, even where moisture is
present
■ Remains stable in high temperatures — usable from 30°F to
190°F (-1°C to 88°C)
Lubricants
■ Dries slowly to a thin, non-conductive film that won’t harden
in conduit
■ Easy to apply by hand or by brush
■ Creamy texture applies easily and uniformly
■ Homogeneous blend requires no mixing
■ Won't dry out – surface coat forms to control evaporation
■ Environmentally safe – non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-398
1-gal. Bucket
31-391
5-gal. Bucket
31-395
Yellow 77® Wire Pulling Lubricant
■ The #1 brand of wire pulling lubricant since 1959 — the perfect
general purpose lube
■ Wax-based formula provides superior lubricity
■ Safe to use with most cable types except low-density polyethylene
and semi-conducting jackets
■ Clings to cable throughout long pulls, even where moisture is
present
■ Won’t break down or separate after repeated exposure to
freezing temperatures
■ Dries to a thin, non-conductive film
■ Easy to apply by hand or by brush
■ Creamy texture applies easily and uniformly
■ Homogeneous blend requires no mixing
■ Won’t dry out — surface coat forms to control evaporation
■ Environmentally safe — non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-358
1-qt. Tub
31-350
1-gal. Bucket
31-351
5-gal. Bucket
31-355
55-gal. Drum
31-365
1-800-435-0705 for Customer Service
www.idealindustries.com
B-9
ClearGlide™ Wire Pulling Lubricant
■ Clear and colorless for quick and easy clean-up — great for indoor and retrofit
pulls
■ Exceptional lubricity for super-fast pulls
■ Polymer-based formula is perfect for all electrical and datacomm applications
■ Safe to use with all cable types
■ Controlled evaporation rate is ideal for shorter runs
■ Remains stable over wide temperature range — usable from
30°F to 180°F (-1°C to 82°C)
Lubricants
■ Dries to a semi-fluid film that won't clog conduit
■ Easy to apply by hand, brush or pump
■ Environmentally safe — non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-388
1-gal. Bucket
31-381
5-gal. Bucket
31-385
4 oz. Squeeze bottle in saleable 6-pack
31-389
55-gal. Drum
31-2143
Velocity™ Wire Pulling Lubricant
■ High cling factor
■ Maximum friction reduction
■ Specification grade
■ Compatible with all popular cable types
■ Temperature stable
■ UL listed
■ Non-combustible residue
■ Environmentally safe -- non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-276
1-gal. Bucket
31-277
5-gal. Bucket
31-278
55-gal. Drum
31-279
1-qt. Bag (12 bags/bucket)
31-282
1/2-gal. Bag (6 bags/bucket)
31-283
Recommended Quantity of Lubricant Formula
Q = .0015 x L x D
Q = Quantity of recommended lube in gallons
L = Length of pull in feet
D = Nominal ID of conduit in inches
The formula listed above is used as a guideline on estimating the quantity of lube needed for various jobs. Many factors go into a cable pull,
however this formula is just based on length of the pull and diameter of the conduit.
Increase quantities for the following troubles:
• Stiff, heavy cable
• Rough, old or dirty conduits
• High percent conduit fill
• Pulls with several bends
• High temperatures
B-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
Aqua-Gel® IIP Cable Pulling Lubricant
■ Features the same excellent qualities as Aqua-Gel® II Cable Pulling
Lubricant with a lower viscosity for easy pouring and pumping
■ Pourable formula clings to cable – eliminates hand application for a
cleaner and safer job
■ Compatible with all cable types
■ Cleans up easily with soap and water
Description
Cat. No.
1-gal. Jug
31-421
5-gal. Bucket
31-425
55-gal. Drum
31-435
Lubricants
■ Environmentally safe – non-toxic, non-flammable and non-corrosive
Aqua-Gel® CW Cable Pulling Lubricant
■ Features the same excellent qualities as Aqua-Gel® II Cable Pulling Lubricant
with a lower temperature range for use outdoors in cold weather
■ Polymer-based, cold-weather formula remains stable in storage from -28°F to 190°F
(-33°C to 82°C)
■ Formulated for exterior use in cold weather conditions
■ Cleans up easily with soap and water
■ Clings to cable throughout long pulls
■ Well-suited for hand or poured applications
■ Environmentally safe — non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-298
1-gal. Jug
31-291
5-gal. Bucket
31-295
55-gal. Drum
31-3373
Aqua-Gel® II Cable Pulling Lubricant
■ Polymer-based formula provides maximum tension reduction in
high-stress electrical and communications cable-pulling operations
■ Compatible with all cable types except composite rubber
■ Cleans up easily with soap and water
■ Clings to cable throughout long pulls
■ Remains stable over wide temperature range — usable from
28°F to 180°F (-2°C to 88°C)
■ Dries to a semi-fluid film that won’t clog conduit
■ Easy to apply by hand, brush or pump
■ Environmentally safe – non-toxic, non-flammable and non-corrosive
■ For outdoor use only
Description
Cat. No.
1-qt. Squeeze bottle
31-378
1-gal. Bucket
31-371
1-qt. Bag (12 bags per bucket)
31-376
1/2-gal. Bag (6 bags per bucket)
31-377
5-gal. Bucket
31-375
55-gal. Drum
31-3855
1-800-435-0705 for Customer Service
www.idealindustries.com
B-11
Cable Gripping Gloves
Noalox® Anti-Oxidant
■ Rubber coating provides positive grip
on lubricated cable
■ Anti-oxidant and anti-seizing
compound improves efficiency
and service life of aluminumto-aluminum and
aluminum-to-copper
electrical connections
■ Comfortable fit
Description
Rubber-Coated Gloves
Cat. No.
31-417
■ Suspended zinc
particles penetrate and
cut aluminum oxide
Accessories
■ Provides additional interstrand and inter-conductor
current paths for improved conductivity and cooler
connections
Duct Seal
■ Seals around junction boxes,
flashings and service
entrances
■ Carrier material excludes air to prevent further oxidation
■ For use with all types of pressure-type wire connectors
including screw-on, tap, service entrance and split-bolt
■ Permanently soft, non-toxic
compound can be
painted immediately
after application
■ Reduces galling and seizing and promotes good ground
continuity on aluminum conduit joints
■ Won’t adversely affect
other plastic materials or
corrode metals
Description
Cat. No.
1 lb. Block (10 per carton)
31-601
5 lb. Block (10 per carton)
31-605
Bender Putter
Description
1/2-oz. Tube
4-oz. Squeeze bottle
8-oz. Squeeze bottle
8-oz. Brush cap
1-gal. Bucket
5-gal. Bucket
Cat. No.
30-024
30-026
30-030
30-031
30-032
30-040
Twist-a-Nut™ Conduit
Deburring Tool
■ Steel shaft with rubber grip and
conduit bender-shaped head
■ Includes velour
pouch to protect
head
Description
Cat. No.
Bender Putter
74-999
■ Deburrs inside and outside edges of 1/2 in., 3/4 in. and 1 in.
thin wall conduit
■ Hooded tip tightens EMT fitting set screws without slipping
■ Square tip “seats” much more quickly on fitting screws than
slotted version
IDEAL Wipes™
The Multi-Purpose Towel
■ Head removes and is interchangeable with
IDEAL 7-in-1 Twist-a-Nut™ Screwdriver
shaft (#35-908)
■ Pre-moistened wipes require no water
■ Cleans dirt, grease, lube and grime
■ Head can be used in drill or cordless
screwdriver
■ Durable fabric scrubs without tearing
■ Universal Wire-Nut® Wire Connector
wrench in handle end eases installation of
twist-on connectors
■ Infused with natural hand moisturizers
and Vitamin E
■ Orange citrus scent
Description
IDEAL Wipes™, 12 in. x 9 in.
B-12
www.idealindustries.com
35-098
■ Lifetime guarantee (excludes blades)
Qty.
Cat. No.
Description
Cat. No.
82/can
38-500
Conduit Deburring Tool, slotted tip
35-083
Conduit Deburring Tool - head only, slotted tip
35-096
Conduit Deburring Tool, square tip
35-075
Conduit Deburring Tool - head only, #2 square tip
35-098
Replacement Blades (2/pack)
35-097
1-800-435-0705 for Customer Service
Wire Installation
Conduit Benders
■ Exceptional, durable, materials for extra strength
■ Reinforced at stress points for longer life
■ Markings are raised and cast into the bender body on both sides for easy visibility
■ Deeply serrated step helps prevent slippage when applying force
■ Grooved internal hook surface helps prevent conduit from slipping
■ Flat hook surface provides stable starting point
Ductile Iron
Aluminum
■ Withstands a lifetime
of heavy use
■ Lightweight aluminum
for easy handling
■ Ductile iron material is
stronger than
malleable iron
■ Strong enough for
every day use
Conduit Type and Size
1/2 in. EMT
Bender & Handle
Cat. No.
74-026
Conduit Benders
■ Desirable Benfield bending system
Bender & Handle
Cat. No.
74-046
Conduit Type and Size
1/2 in. EMT
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-027
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-047
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-028
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-048
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-034
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-035
Conduit Type and Size
Bender Only
Cat. No.
Bender Only
Cat. No.
Conduit Type and Size
1/2 in. EMT
74-001
1/2 in. EMT
74-031
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-002
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-032
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-003
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-033
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-006
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-036
Handles for Benders
■ Rugged, steel construction for long-term durability
■ Baked-on blue enamel finish resists corrosion and enhances visibility
■ Convenient bending guide for offset bends
Ductile
Conduit
Type and Size
Aluminum
Handle Only
Cat. No.
Conduit
Type and Size
Handle Only
Cat. No.
1/2 in. EMT
74-019
1/2 in. EMT
74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-020
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-021
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-021
1-800-435-0705 for Customer Service
www.idealindustries.com
B-13
Heavy-Duty Hacksaw
Hickeys
■ Exceptional, durable, heat treated
materials for extra strength
■ Reinforced at stress points for
longer life
Conduit Benders/Hacksaws
■ Grooved internal hook surface
helps prevent conduit from
slipping
■ Use as conventional hacksaw
or as jab saw to enlarge holes
■ Rugged frame provides lightweight
rigidity and exceptional control
Ductile Iron Hickeys
■ Stores up to nine extra blades
■ Blades can be adjusted to 55° angle for
flush cutting and tensioned to 25,000 psi
■ Includes 12 in. x 24T bi-metal blade
■ High-strength ductile iron construction
■ Grooved internal hook helps prevent conduit from slipping
Description
Cat. No.
■ Lifetime replacement guarantee
Heavy Duty Hacksaw
35-260
Conduit Type and Size
Hickey Only
Cat. No.
1/2 in. EMT
74-010
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-011
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-012
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-013
Ergonomic Hacksaw
Handles for Hickeys
■ Rugged, steel construction for
long-term durability
■ Angled handle for easier cutting
■ Baked-on blue enamel finish
resists corrosion and enhances
visibility
■ Blade can easily be adjusted for flush cutting
■ Easy tensioning wing-nut keeps blades tight for straighter cuts
■ Convenient bending guide for
offset bends
■ Cushioned ergonomic grip for performance and comfort
■ Includes 12 in. x 24T bi-metal blade
Conduit Type and Size
Handle Only
Cat. No.
1/2 in. EMT
74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-021
Pocket Bender Guide
Description
Cat. No.
Ergonomic Hacksaw
35-261
Hacksaw Blades
■ Bi-metal blades provide
strength, flexibility and
longer life
■ Convenient pocket-sized reference guide
Description
■ Includes simple, concise bending
techniques for precision stubs,
back-to-back, offset and saddle bends
■ Request free booklet #P-100
B-14
www.idealindustries.com
Qty./Pack
Cat. No.
12 in. x 18T Blades
10
35-271
12 in. x 24T Blades
10
35-272
12 in. x 32T Blades
10
35-273
12 in. x 18T Blades
100
35-262
12 in. x 24T Blades
100
35-263
12 in. x 32T Blades
100
35-264
1-800-435-0705 for Customer Service
Wire Installation
Valu-Line™ Pull-Line
Conduit Measuring
Tape
■ White with gray tracer for easy
identification
■ Provides quick and accurate
measurement of conduit runs
■ Easy-to-read markings in
sequential one-foot
increments
Sta
nda
Dut rd
■ Will not rot
or mildew
■ 160 lb. tensile strength
y
■ Pulls rope through raceways
without stretching
■ Can be left in
conduit for future use
Description
Valu-Line™ Pull-Line – 6,500 ft. (bucket)
Tensile Strength
Cat. No.
190 lb. avg.
31-338
Powr-Fish®
Pull-Line
■ White with blue
tracer for easy
identification
■ Dispenser features built-in cutter, handle, non-skid base and
adjustable reel tension
■ Will not rot or mildew
Description
Cat. No.
Conduit Measuring Tape – 3,000 ft.
31-347
Dispenser
31-349
Pro-Pull™ Rope
■ Continuous-fiber
polyline great
for blowing
directly into
conduit
■ Low-friction
polypropylene rope
slides easily through
conduit
■ Will not rot
or mildew
■ Non-sliver surface can
be handled without gloves
Hea
vy
D
■ Can be left in
conduit for
future use
uty
■ Will not rot or mildew
■ Rugged, lightweight construction
Description
Tensile Strength
Cat. No.
210 lb. min.
31-340
Rope Size
Tensile
Strength
Cat. No.
31-343
1/4 in. x 250 ft. Reel
1/4 in. x 600 ft. Reel
1/4 in. x 1,000 ft. Reel
1,125 lbs.
1,125 lbs.
1,125 Ibs.
31-839
31-840
31-841
Powr-Fish® Pull-Line
3/8 in. x 250 ft. Reel†
3/8 in. x 600 ft. Reel†
3/8 in. x 1,200 ft. Reel†
2,430 lbs.
2,430 lbs.
2,430 lbs.
31-844
31-845
31-846
■ White with red tracer for
easy identification
1/2 in. x 250 ft. Reel†
1/2 in. x 600 ft. Reel†
1/2 in. x 1,200 ft. Reel†
3,780 lbs.
3,780 lbs.
3,780 Ibs.
31-849
31-850
31-851
■ 500 lb. tensile, our highest
tensile-rated pull-line
5/8 in. x 600 ft. Reel†
5/8 in. x 1,200 ft. Reel†
5,580 Ibs.
5,580 Ibs.
31-853
31-854
■ Continuous-fiber
polyline great for
blowing directly
into conduit
3/4 in. x 300 ft. Reel†
3/4 in. x 600 ft. Reel†
3/4 in. x 1,200 ft. Reel†
7,650 lbs.
7,650 lbs.
7,650 lbs.
31-855
31-856
31-857
Powr-Fish® Pull-Line – 6,500 ft. (bucket)
Powr-Fish® Pull-Line – 6,500 ft. (box)
■ Will not rot
or mildew
210 lb. min.
Ex
Heatravy
Dut
y
† Eye splice on working end.
500
#
■ Can be left in
conduit for future
use
Description
Powr-Fish Pull-Line – 2,200 ft. (bucket)
®
1-800-435-0705 for Customer Service
Tensile Strength
Cat. No.
500 lb. min.
31-344
www.idealindustries.com
B-15
Pulling Supplies
■ Continuous-fiber
polyline great for
blowing directly
into conduit
Pulling Supplies
Foam Carriers
Line Packages
■ Attach to a suitable line to serve as a piston – clears out
water or debris as they travel through conduit
■ One-piece pull line and foam tip unwind as they move
through conduit
■ Durable foam construction for repeated use and long life
■ One-piece construction for faster, easier use with no knots
or foam carriers to retrieve
■ For use with any type of blower or vacuum system
■ Line tensile strength of 17 lbs.
■ Available individually or in multi-pack bags
■ For use with any type of blower or vacuum system
■ Available individually or in multi-pack bags
Multi-Pack Line Packages
Multi-Pack Foam Carriers
Cat. No.
Description
1/2 in. Foam Carrier, 5-pack bag
31-466
Line Package, 1/2 in. x 75 ft., 10-pack bag
3/4 in. Foam Carrier, 5-pack bag
31-467
1 in. Foam Carrier, 5-pack bag
31-468
1-1/4 in. Foam Carrier, 3-pack bag
1-1/2 in. Foam Carrier, 2-pack bag
Description
2 in. Foam Carrier, 1-pack bag
Color
Cat. No.
Red
31-472
Line Package, 1/2 in. x 150 ft., 10-pack bag
Red
31-473
Line Package, 3/4 in. x 200 ft., 5-pack bag
Yellow
31-475
31-469
Line Package, 3/4 in. x 300 ft., 5-pack bag
Yellow
31-476
31-470
Line Package, 3/4 in. x 450 ft., 5-pack bag
Yellow
31-477
31-471
Line Package, 1 in. x 200 ft., 5-pack bag
White
31-479
Line Package, 1 in. x 300 ft., 5-pack bag
White
31-480
Line Package, 1 in. x 450 ft., 5-pack bag
White
31-481
Bulk-Pack Line Packages
Bulk-Pack Foam Carriers
Description
Cat. No.
Description
Color
Cat. No.
2-1/2 in. Foam Carrier, single
31-322
Line Package, 3/4 in. x 75 ft., single
Yellow
31-330
3 in. Foam Carrier, single
31-323
Line Package, 1 in. x 75 ft., single
White
31-334
3-1/2 in. Foam Carrier, single
31-324
Line Package, 1 in. x 200 ft., single
White
31-335
4 in. Foam Carrier, single
31-325
5 in. Foam Carrier, single
31-326
6 in. Foam Carrier, single
31-327
B-16
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
C
Engineered to strip every wire right
Kinetic™ Reflex™ T®-Stripper Wire Stripper
Ergonomic handles with Santoprene™ grip
and Thumb Valley™ make this the premier
wire stripper in the market.
Kinetic™ Super Wire Stripper
The ergonomic design and patented Santoprene™
grip wicks away perspiration and reduces
muscle fatigue. The Thumb Valley™ guide and
precision stripping holes promote the highest
accuracy in the industry.
Reflex™ Super T®-Stripper Wire Stripper
The ergonomic design with curved handles
reduces wrist fatigue. Features 6/32 and 8/32
self-chasing, bolt cutting holes and a locking
pawl for safe storage.
Reflex™ Premium T®-Stripper
• Locking Pawl
• Bolt Cutting
• Extended
Textured
Comfort
• Ergo Handles
Designed for total-comfort and wire stripping.
Ergonomic handles fit an electrician’s natural
grip and reduces hand fatigue. Textured, slipresistant sleeves cushion thumb and fingers.
• Thumb Valley™
Protection
• Pocket Locket
Locking Hasp
• Shear Cut
Bolt Cutters
• Santoprene™
• Curved
Handles
• Thumb Valley™
Protection
• Pocket Locket
Locking Hasp
• Shear Cut
Bolt Cutters
• Santoprene™
• Ergo Handles
Super T®-Stripper Wire Stripper
• Extended
Textured
• Ergo Handles
Traditional T®-Stripper Wire Stripper features with
the added convenience of bolt-cutting holes and
locking pawl. Curved comfort-grip handles
accommodate high-volume wire stripping.
T®-Stripper Wire Stripper
• Locking Pawl
• Bolt Cutting
• Comfort
• Curved
Handles
The industry standard for almost 50 years. Compact,
lightweight and easy to use. Features precision-ground,
knife-type blades, built-in looping holes, wire cutters
and a convenient plier nose.
• Straight Handles
T®-Stripper Wire Stripper Selection Guide
8
8
10 12 14 16 18 20 22 24 26 28 30 32
12 14 16 18 20
Stranded
10 12 14 16
Solid
8
Stranded
6
8
Solid
8
10 12 14 16
Stranded
10 12 14 16 18
10 12 14
#45-400’s
#45-600’s
#45-700’s
#45-900’s
45-125
45-317
45-417
45-617
—
—
45-121
45-316
45-416
45-616
45-716
—
45-120
—
45-415
—
45-715
45-915
—
45-315
—
45-615
—
—
45-124
45-318
45-418
45-618
45-718
45-918
45-123
45-323
45-423
—
—
—
Solid
10 12 14 16 18
Stranded
16 18 20 22 24 26
#45-300’s
Solid
14 16 18 20 22 24
Stranded
24 26 28 30 32
#45-100’s
Solid
22 24 26 28 30
Hole Size
10 12 14 16 18 20 22 24 26 28 30
6
T®-Cutter
Static Disp
C-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Kinetic™ Reflex™ T®-Stripper
Wire Strippers
Kinetic™ Super
Wire Strippers
Wire Strippers
■ Non-slip Santoprene™ textured grips
■ Plier nose for holding and twisting wires
■ Slide lock for safety and storage
■ Non-slip Santoprene™ textured grips and thumb rest
■ Thumb and finger valley makes stripping easier
and more accurate
■ Plier nose for holding and twisting wires
■ Slide lock for safety and storage
■ “Shear-Cut™” bolt cutters
■ Thumb and finger valley makes stripping easier and more
accurate
■ “Shear-Cut™” bolt cutters
Description
Solid
Stranded
Cat. No.
Kinetic Super™ Wire Stripper
10-18
12-20
45-715
Description
Solid
Stranded
Cat. No.
45-716
Kinetic™ Reflex™ T®-Stripper Wire Stripper
10-18
12-20
45-915
45-718
Kinetic™ Reflex™ T -Stripper Wire Stripper
6-14
8-16
45-918
Kinetic
Super™
Kinetic
Super™
Wire Stripper
Wire Stripper
14-24
16-26
6-14
8-16
®
Reflex™ Premium T®-Stripper
Wire Strippers
Reflex™ Super T ®-Stripper
Wire Strippers
■ Ergonomic design for maximum comfort
■ 6/32 and 8/32 self-chasing screw-cutting holes
■ Curved handles reduce wrist fatigue
■ Locking pawl for safe storage
■ Sleeves that extend to stripping head to cushion thumb and fingers
■ Ergonomic design for maximum comfort
■ Textured, no-slip sleeves provide a sure, easy grip
■ Curved handles reduce wrist fatigue
■ Sleeves that extend to stripping head to cushion thumb and fingers
Description
Solid
Stranded
Cat. No.
Reflex™ Premium T®-Stripper Wire Stripper
10-18
12-20
45-415
Reflex™ Premium T®-Stripper Wire Stripper
14-24
16-26
45-416
Description
Solid
Stranded
Cat. No.
Reflex™ Premium T®-Stripper Wire Stripper
22-30
24-32
45-417
Reflex™ Super T®-Stripper Wire Stripper
8-16
10-18
45-615
Reflex™ Premium T®-Stripper Wire Stripper
6-14
8-16
45-418
14-24
16-26
45-616
22-30
24-32
45-617
8-14
8-16
45-618
12-2 and
14-2
—
45-621
Reflex™ Premium T®-Stripper – Metric
Reflex™ Premium 14/2 NM Cable
T®-Stripper Wire Stripper
0.5mm2-4.0mm2
45-425-341
Reflex™ Super T®-Stripper Wire Stripper
w/static dissipative grips
14/2
45-448
Reflex™ Super T®-Stripper Wire Stripper
w/static dissipative grips
Reflex™ Premium 12/2 NM Cable
T®-Stripper Wire Stripper
12/2
Reflex™ Premium T®-Cutter
Cutter
1-800-435-0705 for Customer Service
■ Textured sleeves with extra cushioning for added comfort
Reflex™ Super T -Stripper Wire Stripper
®
45-449
45-423
Reflex™ Super 12/2 & 14/2
NM Cable T®-Stripper Wire Stripper
www.idealindustries.com
C-3
Wire Preparation
Wire Strippers
Super T ®-Stripper
Wire Strippers
Premium T ®-Stripper
Wire Strippers
■ 6-32 and 8-32 self-chasing screw-cutting holes
(not available on metric stripper)
■ Contoured, comfort-grip handles to reduce operator fatigue
■ Curved, cushion-grip handles for ergonomic comfort
■ Locking pawl to keep stripper in closed position
Solid
Stranded
Cat. No.
Description
Super T -5 T -Stripper Wire Stripper
8-16
10-18
45-315
Super T®-8 T®-Stripper Wire Stripper
6-14
8-16
45-318
Description
®
®
Solid
Stranded
Cat. No.
Premium T -5 T -Stripper Wire Stripper
10-18
12-20
45-215
Premium T®-6 T®-Stripper Wire Stripper
14-24
16-26
45-216
®
®
Super T®-Stripper Wire Stripper – Metric
0.5-4mm2
45-310-341
Premium T®-7 T®-Stripper Wire Stripper
22-30
24-32
45-217
Super T -Stripper Wire Stripper – Metric
0.75-6mm
45-315-341
Premium T -8 T -Stripper Wire Stripper
6-14
8-16
45-218
Super T®-Stripper Wire Stripper – Metric
0.5-4mm2
45-317-341
®
2
T ®-Stripper
Wire Strippers
■ Built-in wire cutter and looping holes
■ Tough steel construction
■ Spring-loaded automatic opening
■ Locking tab keeps spring in place
■ Corrosion-resistant, black oxide finish
■ Premium model features comfort-grip handles; Super model
features curved cushion-grip handles; Reflex™ Premium model
features ergonomic design with textured cushion-grip handles
■ Tough steel construction
■ Locking tabs keep spring in place
Description
Solid
Stranded
Cat. No.
T -5 T -Stripper Wire Stripper
10-18
12-20
45-120
T®-6 T®-Stripper Wire Stripper
14-24
16-26
45-121
T®-7 T®-Stripper Wire Stripper
22-30
24-32
45-125
T -8 T -Stripper Wire Stripper
6-14
8-16
45-124
®
T®-Stripper Wire Stripper – Metric
0.75-6mm2
45-120-341
T®-Stripper Wire Stripper – Metric
0.5-4mm2
45-125-341
C-4
www.idealindustries.com
■ Spring-loaded automatic opening
■ Corrosion-resistant, black oxide finish
■ Laser-etched wire gauge for easy-to-read visibility
®
■ Hardened steel, sheer-type blades
■ Convenient plier nose for extra gripping strength
■ Convenient plier nose for extra gripping strength
®
®
T ®-Cutter Wire Cutters
■ Form-ground, knife-type blades for accurate, easy stripping
without nicking insulation
®
®
Description
Wire Range
Cat. No.
T -Cutter Wire Cutter
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-123
Premium T®-Cutter
Wire Cutter
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-223
Super T®-Cutter
w/static dissipative grips
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-323
Reflex™ Premium
T®-Cutter Wire Cutter
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-423
®
1-800-435-0705 for Customer Service
Super T ®-Stripper Wire Strippers—
Static Dissipative
NM Cable Dual-Hole T ®-Stripper
Wire Stripper
■ Static dissipative grips for dispersing static charge buildup
through the operator to the ground (operator must be
grounded via wrist strap or other grounding device)
■ Stripping holes for stripping two 12 AWG or two 14 AWG
wires simultaneously
■ Locking pawl to keep stripper in closed position
Description
Solid
Stranded
■ Ability to strip both conductor wires of NM cable at one time
■ Contoured, comfort grip handles on Premium model
Cat. No.
Super T®-6 T®-Stripper Wire Stripper
w/static dissipative grips
14-24
16-26
45-316
Super T®-7 T®-Stripper Wire Stripper
w/static dissipative grips
22-30
24-32
45-317
Description
Premium T®-14 T®-Stripper Wire Stripper
Wire Range
Cat. No.
12 or 14 AWG solid
45-247
NM Cable T ®-Stripper
Wire Strippers
V-Notch Stripper
■ Easy, one-step stripping of outer jacket of NM cable —
no slitting required
■ Cuts copper or aluminum wire, solid or stranded
■ Rotating cam wheel adjusts to strip 10-24 AWG wire
■ Looping holes for solid wire
■ Versatility to strip, cut and loop conductor wires with
precision and ease
■ Locking hasp
■ Stripping holes for 12 or 14 AWG solid wire
■ Locking pawl for safe storage
Description
Cat. No.
V-Notch Stripper
45-101
1-800-435-0705 for Customer Service
Description
14/2 NM Cable T®-Stripper Wire Stripper
12/2 NM Cable T®-Stripper Wire Stripper
Reflex™ Super 12/2 & 14/2 NM Cable T®-Stripper Wire Stripper
Cat. No.
45-248
45-249
45-621
www.idealindustries.com
C-5
Wire Strippers
Tools and Totes
Wire Preparation
7-in-1 Stripper
Data T®-Cutter Wire Cutters
45-075
45-074
Wire Strippers
■ Cuts round communication cable and maintains cable geometry
for better cable performance
■ Versatile, seven-function tool features precision-ground stripping
blades, cushioned grips and plier nose
■ Cuts multi-pair cable up to .500 in. (12.7mm) and coaxial cable
up to RG-9/U
■ Strips 8 to 16 AWG solid and 10 to 18 AWG stranded wire
■ Suitable for soft cables (not ACSR)
■ Crimps bare and insulated terminals for 10 to 22 AWG wire, RG-59
coax connectors and 7 to 8mm auto ignition connectors
■ Steel reinforced center conductors can be trimmed with bolt
cutting holes
■ Cuts unhardened wire, bolts and screws (4-40, 6-32, 8-32, 10-24
and 10-32) and reforms threads
■ Cushioned comfort grip handles
■ Cuts stranded, solid, Romex® and U.F. wire to 8 AWG
■ Locking latch keeps tool closed in pouch
■ Reams and de-burrs conduit
■ Data T®-Cutter II designed for RG-58 and RG-6 coaxial cable
■ Gauges and loops wire
Description
Cat. No.
Data T®-Cutter
45-074
Description
Cat. No.
Data T®-Cutter II
45-075
7-in-1 Stripper
45-777
Combo Tool
Coax Strip and Crimp Tool
■ Convenient, four-function tool features precision-ground
stripping holes and knife-to-anvil cutting blades
■ Crimps bare and insulated terminals
■ Strips 8 to 20 AWG solid and 10 to 22 AWG stranded wire
■ Cuts unhardened bolts (4-40, 6-32, 8-32, 10-24 and 10-32)
and reforms threads
■ Precision, form-ground stripping holes remove outer jacket and
insulation from RG-59 and RG-6 coaxial cable
■ Durable blades cut copper-coated steel conductors
■ Three crimping nests for crimping F-connectors and ring terminals
Description
Cat. No.
Description
Cat. No.
Combo Tool
30-428
Coax Strip & Crimp Tool
30-433
Coax Strip & Crimp Tool w/F-Connectors
30-433F
Multi-Crimp Strip Tool
■ Cuts wire
■ Crimps insulated
and non-insulated
wires
■ Cuts bolts
■ Strips 10-22 AWG wire
Description
Cat. No.
Multi-Crimp Strip Tool
45-778
C-6
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Cable Ripper
Lil’ Ripper Stripper™
■ Slits cable sheathing before
stripping wires
■ Rips Romex® outer jacket
cleanly and quickly
■ Quick, clean and easy end
or mid-run removal of jacket
■ Clips outer sheathing to remove
excess Romex® jacket
■ Convenient built-in wire gauge
■ Strips inner conduit wires
Cat. No.
Side Entry Cable Ripper
45-118
■ Twist-Assist™ tightens most popular
sizes of winged twist-on connectors
■ Injection molded elastomer grip provides a comfortable, slip
resistant grip
Underground Feeder
(UF) Cable Stripper
■ Strip length measuring scale allows for quick and easy
measurements
■ Conveniently fits in your pocket
■ Self-adjusting stripping blades
automatically select
proper position
■ Strips 12 AWG solid to
14 AWG Underground
Feeder (UF) Cable
Description
Cat. No.
Lil’ Ripper Stripper™
45-025
■ Strips Twin and Earth
cable
Rotary BX/MC Cutters
■ Open-throat construction allows unlimited strip length
■ Handles all common BX,
MC and Flex cables
■ Neatly removes outer cable sheath and then inner wire
sheathing to desired lengths
35-780
■ Blue sapphire blade cuts
armor without damage to
internal conductors
■ Lightweight, ergonomic design reduces user fatigue
■ Replaceable blades
Description
Cat. No.
Underground Feeder Cable Stripper
45-235
■ Splices cleanly through
casings with only a
few turns
■ Thumbscrew holds cable
securely in place
35-782
■ Epoxy-coated to resist
corrosion
Grip-N-Strip™
End Stripper
■ Handle knob stores up to
six replacement blades
■ Self-adjusting stripping blades
automatically select proper position
Description
Cat. No.
Rotary BX/MC Cutter
35-780
■ Strips 12 AWG solid to 20 AWG
stranded PVC insulated wire
Replacement blades (5 per pack)
35-781
Rotary BX/MC Cutter with Lever
35-782
■ Dual strip-length gauge marks at
3/16 in. and 5/16 in.
■ Cuts up to 12 AWG solid wire
■ Lightweight, ergonomic design
reduces user fatigue
■ Reinforced fiberglass construction
■ Hardened steel blades for extra strength and longer life
Description
Cat. No.
Grip-N-Strip™ End Stripper
45-227
1-800-435-0705 for Customer Service
www.idealindustries.com
C-7
Wire Strippers
Description
■ Looping holes loop wire for
screw-on connections
Custom Stripmaster® and Custom Stripmaster® Lite Wire Strippers
■ Strips 30 through 10 AWG solid or stranded wire
■ Mil-spec die-type blades allow precision stripping
Custom
Stripmaster®
Wire Stripper
■ Inner cutting hole sized to conductor and counter-bored holes sized to insulation
■ Replaceable Grippers
■ Optional short stop latch and transparent wire stop
■ Cushioned, comfort grip handles
Wire Strippers
Custom
Stripmaster® Lite
Wire Stripper
■ Custom Stripmaster® Lite is 3/4’s the size of Custom Stripmaster® Wire Stripper
and strips 16 through 30 AWG solid or stranded wire
■ Custom Stripmaster® Lite requires one-third less hand pressure for each strip
actuation
■ Engineering Service and made-to-order blades available.
Contact factory for complete product and blade number listing.
Gripper pads hold the wire securely in
a centerline relationship with the blade.
Die-type blades incorporate a counter-bored hole sized to the
insulation and an inner cutting hole sized to the conductor.
This varies depending on insulation type and thickness.
Custom Stripmaster® Wire Strippers and Die-Type Blades
Cutting Hole Diameter
(Inches)
Counterbore Diameter
Wire Size AWG
22
20
18
16
Specifications —
30
28
26
24
14
12
10
Stripper
Cat. No.
Blade Only
Cat. No.
.076
.0935
.096
.113
.119
.136
45-176
L-5559
45-177
L-5560
45-178
L-5561
45-173
L-5562
45-174
L-5563
45-175
L-5564
45-170
L-5210
45-171
L-5211
45-172
L-5436
Three identical holes
45-179
L-7625
Solid Wires
45-169
L-9300
®
For Type E Teflon (600V)
.023
.039
.016
.019
.023
.032
.035
.039
For Type EE Teflon® (1000V)
.028
.043
.034
.052
.042
.0595
.052
.070
.061
.081
.076
.104
.023
.0465
.016
.019
.023
.042
.043
.0465
For Other Misc. Insulations
.028
.055
.034
.0595
.042
.067
.052
.0785
.035
.0635
.042
.073
Tolerances: Cutter Dia.: ± .001; Counter-bore Dia.: ± .002
The 45-170 Series is a Custom Stripmaster® Wire Stripper frame without the short
stop latch and wire stop.
C-8
www.idealindustries.com
.052
.086
.119
.144
.061
.089
.076
.113
.022
.0292
.052
.0595
.016
.020
.024
.037
.040
.043
For Wire Wrap & Other Thin Insulated Wire
.012
.020
.012
.014
.018
.024
.019
.023
.025
.033
.096
.125
.0937
.138
.062
.096
.116
.154
45-169 through 45-188 include grit-type pads (standard).
45-369 through 45-388 include file-type pads.
45-469 through 45-488 include parallel-type pads.
1-800-435-0705 for Customer Service
Tools and Totes
30
Cutting Hole Diameter
Specifications — Counterbore Diameter (Inches)
Wire Size AWG
26
24
22
20
28
18
16
Stripper
Cat. No.
Blade Only
Cat. No.
.052
.070
.061
.081
45-638
LB-918
45-639
LB-919
45-640
LB-920
45-635
LB-915
45-636
LB-916
45-637
LB-917
45-632
LB-912
45-633
LB-913
45-634
LB-914
45-641
LB-921
45-631
LB-911
MIL-W-16878 Type E 600V Teflon® Wire
.023
.039
.016
.019
.023
.032
.035
.039
MIL-W-16878 Type EE 1000V Teflon® Wire
.023
.0465
.023
.0465
.016
.019
.042
.043
General Purpose
.034
.052
.034
.052
.028
.043
.028
.043
.028
.055
.028
.055
.042
.0595
.042
.0595
.034
.0595
.034
.0595
.042
.067
.042
.067
.035
.0635
.035
.0635
.052
.0785
.042
.073
.042
.073
.052
.086
.061
.089
.062
.096
.022
.0292
.052
.0595
.016
.020
.024
.0292
.037
.040
.043
.0595
Wire Wrapping (Thin Insulation Solid Wire)
.012
Four holes, same size
.020
.012
.014
.018
.024
Solid Wires
.019
.023
.025
.033
Tolerances: Cutter Dia.: ± .001; Counterbore Dia.: ± .002. Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
Custom Stripmaster® Wire Strippers and Die-Type Blades
0.05
0.08
0.13
Cutting Hole Diameter
Specifications — Counterbore Diameter (Millimeters) (Reference chart only. Blades are not marked in mm)
mm2 Nom
0.2
0.22
0.5
1.0
1.5
2.5
4.0
6.0
Stripper
®
For Type E Teflon (600V)
1.93
2.37
.584
.99
.406
.482
.584
.813
.889
.99
For Type EE Teflon® (1000V)
.711
1.09
.863
1.32
1.07
1.5
1.33
1.78
.711
1.39
.863
1.5
1.07
1.70
1.33
1.99
3.02
3.45
1.55
2.06
1.93
2.64
.584
1.17
.406
.482
.584
1.07
1.09
1.17
For Other Misc. Insulations
2.44
2.87
2.44
3.17
3.02
3.6
1.55
2.49
1.93
2.87
2.38
3.45
2.94
3.91
.560
.736
.889
1.07
1.33
1.57
1.33
1.5
1.61
1.85
2.18
2.44
.406
.508
.609
.940
1.01
1.09
For Wire Wrap & Other Thin Insulated Wire
.305
Three identical holes
.508
.305
.356
.457
.609
.482
.584
.635
.838
Tolerances: Cutter Dia.: ± .025mm; Counterbore Dia.: ± .051mm. Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
1-800-435-0705 for Customer Service
Cat. No.
Blade Only
Cat. No.
45-176
L-5559
45-177
L-5560
45-178
L-5561
45-173
L-5562
45-174
L-5563
45-175
L-5564
45-170
L-5210
45-171
L-5211
45-172
L-5436
45-179
L-7625
45-169
L-9300
www.idealindustries.com
C-9
Wire Strippers
Custom Stripmaster® Lite Wire Strippers and Die-type Blades
Custom Stripmaster® Lite Wire Strippers and Die-type Blades
1,5
1,0
Cutting Hole Diameter
Specifications — Counterbore Diameter (Millimeters)
Wire Size AWG
0,5
0,22
0,2
0,13
MIL-W-16878 Type E 600V Teflon® Wire
1,55
1,32
1,07
2,06
1,99
1,51
1,07
1,51
Wire Strippers
MIL-W-16878 Type EE 1000V Teflon Wire
1,55
1,32
1,07
2,26
1,99
1,70
1,07
1,70
0,86
1,32
0,86
1,32
0,71
1,09
0,71
1,09
0,58
,099
0,58
0,99
0,08
0,48
0,89
0,05
0,41
0,82
Stripper
Cat. No.
Blade Only
Cat. No.
45-638
LB-918
45-639
LB-919
45-640
LB-920
45-635
LB-915
45-636
LB-916
45-637
LB-917
45-632
LB-912
45-633
LB-913
45-634
LB-914
45-641
LB-921
45-631
LB-911
®
General Purpose
1,57
1,32
2,44
2,18
1,07
1,85
1,07
1,85
0,86
1,51
0,86
1,51
0,89
1,61
0,89
1,61
0,71
1,40
0,71
1,40
0,74
1,51
0,74
1,51
0,58
1,18
0,58
1,18
0,56
1,32
0,61
1,09
0,48
1,09
0,51
1,02
0,41
1,07
0,41
0,86
Wire Wrapping (Thin Insulation Solid Wire)
0,30
0,76
0,61
0,46
0,36
0,30
Solid Wires
0,84
0,64
0,58
0,48
Tolerances: Cutter Dia.: ± .001; Counterbore Dia.: ± .002. Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
Four holes, same size
C-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Stationary Gripper for Red
Handle Units
For 10, 12 & 14 AWG Wire
L-5215
.129
For 16 thru 30 AWG wire.
Short-stop Latch protects wire strands by
limiting the stripping stroke to 5/32 in. and
retains the slug until the wire is ready
for terminating.
Gripper Pads are available in your choice of
either parallel, file or grit-type. File-type pads
may be used on hard-to-grip insulations such as
Kapton® and some Teflon®.
Transparent wire stop provides
uniform stripping length.
Replacement Gripper Pads
L-5217
.156
Replacement Frame Assemblies
For Custom Stripmaster® and Custom Steel Stripmaster® Wire Strippers
For Custom Stripmaster Wire Strippers
Cat. No.
Surface
Type
Frame only, 10-14 AWG
L-5616
Frame only, 16-30 AWG
L-5617
Frame only, 10-14 AWG, Wire Stop and Latch
L-5618
Frame only, 16-30 AWG, Wire Stop and Latch
L-5619
Frame only, 10-14 AWG, internal spring (see note)
L-9039
Frame only, 16-30 AWG, internal spring (see note)
L-9038
®
Gripper Set*
Cat. No.
Movable Gripper
Cat No.
Stationary Gripper
(Thickness)
Grit**
LB-197
L-5212
L-5215 (.129 in.)
Grit**
LB-198†
L-5212
L-5217 (.156 in.)
File
LB-721
LB-718
LB-719 (.129 in.)
File
LB-722‡
LB-718
LB-720 (.156 in.)
Parallel
LB-730
LB-727
LB-728 (.129 in.)
Parallel
LB-731
LB-727
LB-729 (.156 in.)
For Custom Stripmaster® Lite Wire Strippers
Surface
Type
Gripper Set*
Cat No.
Movable Gripper
Cat. No.
Stationary Gripper
(Thickness)
Grit*
LB-1188
LB-882
LB-883 (.109 in.)
File
LB-1189
LB-1184
LB-1185 (.109 in.)
Parallel
LB-1190
LB-1186
LB-1187 (.109 in.)
* Gripper Set includes one movable gripper, one stationary gripper.
** Grit pads are standard for most Custom Stripmaster® and Custom Stripmaster® Lite
products.
† Formerly L-7954
‡ Formerly L-8928. These are for use on hard-to-grip surfaces such as Kapton® and Teflon®.
Gripper pad selection depends on insulation type and user preference.
Note: For wire gauge 10-14, use .129 in. stationary gripper. For 16-30 AWG, use .156 in.
gripper.
Note: Frames with internal springs allow additional blade penetration pressure for
difficult and multi-layered insulation types.
For Custom Stripmaster® Lite Wire Strippers
Cat. No.
Frame only
LB-895
Frame only, Wire Stop and Latch
LB-896
For Custom Steel Stripmaster® Wire Strippers
Cat. No.
Frame only, 10-14 AWG
LB-1091
Frame only, 16-30 AWG
LB-1092
Frame only, 10-14 AWG, internal spring (see note)
LB-1090
Frame only, 16-30 AWG, internal spring (see note)
LB-1089
Note: Frames with internal springs allow additional blade penetration pressure for
difficult and multi-layered insulation types.
Optional Accessories
Short Stop Latch
Cat. No.
Transparent Adjustable Wire Stop Assembly
Cat. No.
For Custom & Custom Steel Stripmaster® Wire Strippers
L-5269
For Custom & Custom Steel Stripmaster® Wire Strippers
L-5270
For Custom Stripmaster® Lite Wire Strippers
LB-1194
For Custom Stripmaster Lite Wire Strippers
LB-1195
®
Custom Steel Stripmaster® Wire Strippers and Special Flat-Blades for Ribbon and Multi-Conductor Cable
Description
Blade Gap ("x") vertical height
Blade Only Cat. No.
Frame & Blade Cat. No.
N/A
N/A
LB-1091
Flat blade for 26 AWG (.40mm dia.) multi-conductor
.022 in.
LB-1151
45-890
Flat blade for 24 AWG (.00mm dia.) multi-conductor
.030 in.
LB-1152
45-891
Flat blade for 22 AWG (.64mm dia.) multi-conductor
.038 in.
LB-1153
45-892
Flat blade for 20 AWG (.00mm dia.) multi-conductor
.050 in.
LB-1154
45-893
Flat blade for 18 AWG (1.02mm dia.) multi-conductor
.060 in.
LB-1155
45-894
Flat blade for 16 AWG (1.29mm dia.) multi-conductor
.075 in.
LB-1156
45-895
Custom Steel frame only
Teflon® and Kapton® are registered trademarks of E. I. du Pont de Nemours and Company.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-11
Wire Strippers
Stationary Gripper for Black
Handle Units
Custom Stripmaster® Wire Stripper and Custom Stripmaster® Lite Wire Stripper MIL-spec reference chart
Cat. No.
Custom Stripmaster®
Blade Only Cat. No.
MIL-W-81044/4/5/6
MIL-W-5086/1/7
MIL-W-81044/8/9/10
MIL-W-16878/5
MIL-W-81381/3/4
45-170
45-171
45-173
45-174
45-175
L-5210
L-5211
L-5562
L-5563
L-5564
10-14 AWG
16-26 AWG
10-14 AWG
16-26 AWG
26-30 AWG
MIL-W-22759/32/33/44/45/46
45-1987
45-1654
45-1611
45-2500
45-1987
45-1987-1
45-1654-1
45-1611-1
45-2500-1
45-1987-1
16-26 AWG
16-26 AWG
10-14 AWG
10-14 AWG
16-26 AWG
45-178
45-176
45-1611
45-177
45-178
45-1611
45-1610
L-5561
L-5559
45-1611-1
L-5560
L-5561
45-1611-1
45-1610-1
26-30 AWG
10-14 AWG
10-14 AWG
16-26 AWG
26-30 AWG
10-14 AWG
16-26 AWG
MIL-W-81381/11/12/13/14/22
45-1609
45-1551
45-178
45-1608
45-1654
45-178
45-1609-1
45-1551-1
L-5561
45-1608-1
45-1654-1
L-5561
10-14 AWG
16-26 AWG
26-30 AWG
10-14 AWG
16-26 AWG
26-30 AWG
MIL-W-22759/18/19
45-1608
45-1551
45-1608-1
45-1551-1
10-14 AWG
16-26 AWG
MIL-W-81381/17/21
45-1633
45-1633-1
16-26 AWG
45-1609
45-1551
45-1611
45-1987
45-1609-1
45-1551-1
45-1611-1
45-1987-1
10-14 AWG
16-26 AWG
10-14 AWG
16-26 AWG
45-1957
45-1925
45-1924
45-1611
45-1610
45-2541
42-2543
45-2542
45-2544
45-2565
45-2564
45-2542
45-2544
45-1957-1
45-1925-1
45-1924-1
45-1611-1
45-1610-1
45-2541-1
45-2543-1
45-2542-1
45-2544-1
45-2565-1
45-2564-1
45-2542-1
45-2544-1
14-22 AWG
10-14 AWG
16-24 AWG
10-14 AWG
16-24 AWG
10-14 AWG
16-24 AWG
10-14 AWG
16-24 AWG
10-14 AWG
16-26 AWG
10-14 AWG
16-24 AWG
45-2541
45-2543
45-2618
45-2541-1
45-2543-1
45-2618-1
10-14 AWG
16-24 AWG
16-26 AWG
Wire Specification
Wire Strippers
MIL-81044/11/12/13
MIL-W-22759/34/35/41/42/43
Raychem 44A021X, 44/051X
MIL-W-16878/4
MIL-W-22759/11/12/22/23
MIL-W-81044/16/17
MIL-W-81381/1/2//6/7/8/9/10/17/21
MIL-W-81381/18/19/20
MIL-W-22759/16/17
MIL-W-24640/19/22/23/24
MIL-W-85485/5/6/7/8
MIL-W-85485/9/10/11/12
MIL-W-85485/9/10
BMS 1360 Type 1-6, 19-21, 23-27, 33-34
BMS 1360 Type 12-18, 28-32
BMS 1360 Type 7-12
MIL-W-22759/80/81/82/91/92
MIL-W-22759/83/84/85/86/87/88/89/90
Wire Gauge
Cat. No.
Custom Stripmaster® Lite
Blade Only Cat. No.
Wire Gauge
N/A
N/A
N/A
45-635
45-637
45-637
45-2133
45-2132
LB-915
LB-917
LB-917
45-2133-1
45-2132-1
16-22 AWG
24-30 AWG
24-30 AWG
16-24 AWG
16-24 AWG
45-2133
45-2118
45-640
45-2133-1
45-2118-1
LB-920
16-24 AWG
20-26 AWG
24-30 AWG
45-640
LB-920
24-30 AWG
45-2131
45-2131-1
16-24 AWG
45-640
LB-920
24-30 AWG
45-640
LB-920
24-30 AWG
N/A
N/A
N/A
45-2020
45-2020-1
20-26 AWG
N/A
N/A
N/A
45-2133
45-2118
N/A
45-2133-1
45-2118-1
N/A
16-24 AWG
22-26 AWG
N/A
N/A
N/A
N/A
45-2131
45-2131-1
16-24 AWG
45-2697
45-2697-1
16-24 AWG
N/A
N/A
N/A
N/A
N/A
N/A
45-2693
45-2692
45-2693-1
45-2692-1
16-22 AWG
20-26 AWG
45-2685
45-2685-1
16-24 AWG
NOTE: The above blades represent the best blade for nominal conductor sizes within the wire spec. tolerance. If the conductor size is over or under the nominal dims. an alternate blade may be required.
Please contact our wire stripping applications engineer at 1-800-435-0705 ext. 300 for alternate blades and for blade numbers for MIL-specs. not listed on this chart.
C-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Stripmaster® and Stripmaster® Lite
Wire Strippers
Stripmaster®
Wire Stripper
■ One-step stripping enhances productivity
■ Spring-action motion increases leverage and
reduces operator fatigue
Stripmaster® Lite
Wire Stripper
■ Precision-ground, knife-type blades provide clean,
accurate stripping
■ Sturdy die cast frame provides long-term durability
■ Wire gripper holds wire securely in position
■ Stripmaster® Lite designed for smaller hands —
3/4 the size of the standard Stripmaster®
Stripmaster® Wire Strippers and
Knife-Type Blades
Specifications — Stripping Hole Diameter (Inches)
Wire Size AWG
14
16
18
20
22
24
8
10
12
.159
.141
.106
.144
.105
.085
.073
.073
.144
.113
.090
.072
.061
.048
.048
45-092* or 45-292**
L-4421
.090
.072
.061
.039
.039
45-093
L-4422
.072
.061
.048
.039
.032
.026
45-097
L-4994
.048
.039
.032
.026
45-098
L-5361
.062
.055
45-099
L-8763
.198
*Boxed
.167
26
28
30
Replacement
Blades (Pair)
Cat. No.
.021
.016
Cat. No.
45-090* or 45-290**
L-4419
45-091
L-4420
**Blister Card
Tolerances A.001 -.005
®
Stripmaster Lite Wire Strippers and Knife-Type Blades
12
14
16
18
.072
.061
Specifications — Stripping Hole Diameter (Inches)
Wire Size AWG
20
22
24
26
28
30
.048
.032
.113
.090
.072
.096
.085
.073
16/18
20/22
Cutting Edge
.039
.026
.021
.016
.061 (All stranded wire)
.061 (12 & 14 Solid wire, 16 & 18 Stranded wire)
.072
.048
.250 Wide
Cat. No.
Replacement
Blades (Pair)
Cat. No.
45-671
LB-1001
45-672
LB-1002
45-673
LB-1003
45-674
LB-1004
45-675
LB-1005
Tolerances A.001 -.005
Coax Stripmaster® Wire Strippers and Blades
Description
Coax Stripmaster® for RG-6
Stripmaster® Wire Strippers with Rectangular Holes
Coax Cable
Type (RGU)
Repl. Blade
Cat. No.
Cat. No.
RG-6
LB-740
45-262
Description
For Flat Telephone Cable
(.60 in. or 1.52mm)
Coax Stripmaster for RG-58
RG-58
LB-742
45-264
Coax Stripmaster® for RG-59
RG-59
LB-743
45-265
Coax Stripmaster® for RG-62
RG-62
LB-744
N/A
RG-6
QuadShield
LA-3953
45-282
®
Coax Stripmaster® for RG-6 QuadShield
Cat. No.
Replacement
Blades (Pair)
Cat. No.
N/A
LB-1155
For European Flat Lamp Cord
45-089
L-8762
For SP-SPT Lamp Cord
45-095*
L-4452
*Also strips 2- and 3-conductor low-voltage wire used in G.E. and Touchplate remote control
wiring system.
Coaxial Cables: two-step strip for termination, jacket and dielectric.
Replacement Frame Assemblies
Cat. No.
Optional Accessories
For Stripmaster® Wire Strippers
L-5620
Transparent Adjustable Wire Stop (for Stripmaster® Wire Strippers)
L-5270
For Stripmaster Lite Wire Strippers
LB-1421
Transparent Adjustable Wire Stop (for Stripmaster Lite Wire Strippers)
LB-1195
Replacement Moveable Gripper
L-1953
®
1-800-435-0705 for Customer Service
Cat. No.
®
www.idealindustries.com
C-13
Wire Strippers
Optional
Accessories
Wire Preparation
Stripmaster® Wire Strippers and Knife-Type Blades
8
4
Wire Strippers
5
10
12
Specifications — Stripping Hole Diameter (mm)
Wire Size AWG
14
16
18
20
22
24
3.6
2.7
3.6
2.7
2.2
1.8
3.6
2.9
2.3
1.8
1.5
1.2
2.3
1.8
1.5
1.2
1.8
1.5
4.2
1.6
26
28
30
1
1.2
1
0.8
0.7
1.2
1
0.8
0.7
0.5
0.4
1.4
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
45-090 or
45-290
L-4419
L-5620
45-091
L-4420
L-5620
45-092 or
45-292-241*
L-4421
L-5620
45-093
L-4422
L-5620
Cat. No.
45-097
L-4994
L-5620
45-098
L-5361
L-5620
45-099
L-8763
*Boxed
L-5620
Tolerances A.001 -.005
Stripmaster® Lite Wire Strippers and Knife-Type Blades
12
14
16
1.8
Specifications — Stripping Hole Diameter (mm)
Wire Size AWG
18
20
22
24
26
28
30
1.5
1.2
1
0.8
0.7
0.5
16/18
20/22
Cutting Edge
0.4
2.9
2.3
1.8
1.5 (All stranded wire)
2.4
2.2
1.9
1.5 (12 & 14 Solid wire, 16 & 18 Stranded wire)
1.8
1.2
6.4 wide
Cat. No.
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
45-671
LB-1001
LB-1421
45-672
LB-1002
LB-1421
45-673
LB-1003
LB-1421
45-674
LB-1004
LB-1421
45-675
LB-1005
LB-1421
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
Stripmaster® Wire Strippers and Knife-Type Blades for Metric Wire
0.05
0.1
0.15
Specifications—Stripping Hole Diameter (mm)
Wire Size (mm2)
0.22 0.34
0.5
0.75
1
1.5
2.5
1.3
0.6
0.7
0.8
0.9
1
1.6
1.9
2.4
4
3
6
8
10
Cat. No.
4.3
5
45-090-341 or
45-290-341*
L-4419M
LA-2358
45-092-341 or
45-292-341*
L-4421M
LA-2358
45-098-341 or
45-298-341*
L-5361M
LA-2358
3.6
1.1
*Boxed
Tolerances A.001 -.005
Stripmaster® Lite Wire Strippers and Knife-Type Blades for Metric Wire
0.05
0.1
0.6
0.7
Specifications—Stripping Hole Diameter (mm)
Wire Size (mm2)
0.15
0.22
0.34
0.5
0.75
1
1.5
1
1.6
1.9
0.8
1.1
1.3
0.9
Cat. No.
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
45-671-341
LB-1001M
H-2909
45-672-341
LB-1002M
H-2909
Free Application Engineering Service and made-to-order Custom Stripmaster® and Stripmaster® Wire Strippers are available.
Contact IDEAL INDUSTRIES, INC. for complete information at 1-800-435-0705.
C-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Hand Tools
IDEAL hand tools offer a complete lineup
that includes. . .
■ Insulated Hand Tools
(Pages C-42 — C-45)
■ Pliers - Dipped grip and Smart-Grip™
(Pages C-16 — C-23)
■ Screwdrivers
(Pages C-24 — C-29)
■ Cable Cutters
(Page C-30)
■ Crimpers & BX Cutters
(Page C-32)
■ Measuring tapes, knives, tapping tools,
conduit deburring tools, levels, etc.
(Pages C-32 — C-33)
■ Tool Kits
(Pages C-34 — C-37)
1-800-435-0705 for Customer Service
www.idealindustries.com
C-15
LASERedge™ pliers use high carbon, 1080 steel, which
and durability. All of our LASERedge tools have
provides extra strength and hardness without
laser-hardened blades and teeth, which are more
sacrificing flexibility. It is one of the reasons our tools
precise and provide better durability for strenuous
outperform the competition in performance
applications like cutting steel or ACSR.
Hand Tools
Laser-hardened blades
and teeth last four
times longer
Full polish for maximum
corrosion resistance
Custom hardened
tool steel for
durability
Cross-hatched jaws
so wires won’t slip
when pulling
Textured Santoprene™
slip resistant grip
(Dipped handles also
available. See part # list.)
FastFinder™ letter
identification on the
inside of our handles
provides quick
identification,
even by touch
Blade Design
LASERedge pliers feature “knife-to-anvil”
cutting blades for long life.
(Ideal for cutting screws, nails, hardened
wire and ACSR)
Diagonal
C-16
Long Nose
www.idealindustries.com
Tongue & Groove
Cable Cutter
Crimper
1-800-435-0705 for Customer Service
Tools and Totes
Side-Cutting Pliers
35-3012
w/Crimping Die
Hand Tools
30-3430
w/Fish Tape Puller
35-013
w/Box Joint
■ Drop-forged, high-carbon steel construction withstands
toughest applications
Description (Smart-Grip™ Handles)
Cat. No.
9-1/4 in. New England nose high-leverage w/fish tape puller
35-3012
■ Knife-to-anvil blades never need resharpening
9-1/4 in. New England nose high-leverage w/crimping die
30-3430
■ Cuts hardened wire, bolts and ACSR
Description (Dipped Handles)
Cat. No.
■ Laser-hardened blades and serrated jaws for long-term durability
8-1/2 in. New England nose high-leverage w/crimping die
30-420
■ High-leverage design provides 40% more cutting power
9-1/4 in. New England nose high-leverage w/fish tape puller
35-012
■ Unique reverse rivet protects smooth action of plier movement
9-1/4 in. New England nose high-leverage w/crimping die
30-430
■ Vinyl-coated, comfort-grip handles for a secure grip
9-1/4 in. New England nose high-leverage w/box joint
35-013
Premium Electrician’s
Side-Cutting Pliers
G
Ho reat
or
Awn
ards
All of the features of the Side-Cutting Pliers plus:
Description (Dipped Handles)
Cat. No.
■ Mirror-polished finish to maintain premium appearance
9-1/4 in. New England high-leverage
w/fish tape puller and crimping die
30-435
■ Double-dipped grips for extra cushioning comfort
1-800-435-0705 for Customer Service
www.idealindustries.com
C-17
Diagonal-Cutting Pliers
35-3028
8” Diagonal
35-029
w/Angled Head
Hand Tools
■ Drop-forged, high-carbon steel construction withstands
toughest applications
■ Knife-to-anvil blades never need resharpening
Description (Smart-Grip™ Handles)
Cat. No.
8 in. High-leverage Diagonal
35-3028
8 in. High-leverage Diagonal w/angled head
35-3029
■ Laser-hardened blades cut hardened wire, bolts and ASCR
Description (Dipped Handles)
Cat. No.
■ Vinyl-coated, comfort-grip handles for a secure grip
6 in. High-leverage Diagonal
35-026
■ High-leverage design provides 40% more cutting power
7 in. High-leverage Diagonal
35-027
■ Models 35-029 and 35-3029 feature a convenient angled
head for hard-to-reach areas and rocking out nails
8 in. High-leverage Diagonal
35-028
8 in. High-leverage Diagonal w/angled head
35-029
Long-Nose Pliers
35-3038
35-039
■ Narrow profile head designed for working in tight areas
Description (Smart-Grip™ Handles)
Cat. No.
■ Serrated jaws provide secure gripping surface
7-3/4 in. Long Nose w/Cutter
35-3037
■ Drop-forged, high-carbon steel construction
8-1/2 in. Long Nose w/Cutter
Description (Dipped Handles)
35-3038
Cat. No.
6 in. Long Nose w/Cutter
35-036
7-3/4 in. Long Nose w/Cutter
35-037
8-1/2 in. Long Nose w/Cutter
35-038
8-1/2 in. w/Cutter & stripping holes for 12 & 14 AWG wire
35-039
■ Knife-to-anvil blades never need resharpening
■ Laser-hardened blades cut hardened wire, bolts and ASCR
■ Vinyl-coated, comfort-grip handles for a secure grip
C-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Tongue and Groove Pliers
35-460
Description (Smart-Grip™ Handles)
Jaw Opening
(Inches)
Cat. No.
■ Patented undercut tongue and groove design
ensures solid grip
9-1/2 in. Tongue & Groove Pliers
10 in. Tongue & Groove Pliers
35-3420
35-3430
■ Patented reinforced flange protects against
breakage
Description (Dipped Handles)
1-1/2
2
Jaw Opening
(Inches)
7/8
1-1/2
2
2-1/4
4-1/4
■ Laser-hardened teeth remain sharp longer
■ Drop-forged, high-carbon steel construction
■ Vinyl-coated, comfort-grip handles for a secure grip
6-1/2 in. Tongue & Groove Pliers
9-1/2 in. Tongue & Groove Pliers
10 in. Tongue & Groove Pliers
12 in. Tongue & Groove Pliers
16 in. Tongue & Groove Pliers
Cat. No.
35-426
35-420
35-430
35-440
35-460
Cable Cutters
35-3052
35-052
■ Drop-forged, high-carbon steel construction
Description (Smart-Grip™ Handles)
Cat. No.
■ Precision-ground, hardened cutting edges provide accurate cuts
without cable distortion
9-1/2 in. Cable Cutter
35-3052
Description (Dipped Handles)
Cat. No.
9-1/2 in. Cable Cutter
35-052
■ Designed for maximum leverage with minimum effort
■ Cuts 2/0 copper and 4/0 aluminum (not for use on ACSR)
■ Vinyl-coated, comfort-grip handles
Multi-Crimp Tools
30-3429
30-429
■ Crimps bare or insulated terminals and splices on
10 to 22 AWG wire
Description (Smart-Grip™ Handles)
Cat. No.
9-3/4 in. Multi-Crimp Tool
30-3429
■ Knife-to-anvil blades never need resharpening
Description (Dipped Handles)
Cat. No.
■ Excellent leverage for easy crimping and cutting
9-3/4 in. Multi-Crimp Tool
30-429
■ Drop-forged, high-carbon steel construction
■ Vinyl-coated handles provide a solid, comfortable grip
1-800-435-0705 for Customer Service
www.idealindustries.com
C-19
Hand Tools
35-3430
WireMan™ pliers provide professional results for everyday use.
These tools are the workhorse of electrical pliers; they are
rugged yet precise, providing exceptional durability, easy
cutting and a lifetime of quality use.
Large head for
extra strength
Hand Tools
High leverage rivet requires
less cutting force
Cross-hatched
jaws so wires
won’t slip when
pulling
Custom hardened
tool steel for
durability
Textured Santoprene™
slip resistant grip
FastFinder™ letter
identification
on the inside of our
handles provides
quick identification,
even by touch
(Dipped handles also
available. See part # list.)
Blade Design
WireMan pliers feature “knife-to-knife”
cutting blades for easy cuts.
Diagonal
C-20
www.idealindustries.com
Long Nose
Tongue & Groove
Cable Cutter
Crimper
1-800-435-0705 for Customer Service
Tools and Totes
35-5012
30-4430
■ Custom tool steel for durability
Description (Smart-Grip™ Handles)
Cat. No.
■ High leverage pivot requires less cutting force
7 in. Cutting Pliers
30-4419
■ Sharp, knife-to-knife blades for easy cutting
8 in. Side-Cutting Pliers
30-4420
■ Induction hardened teeth for long life
9-1/4 in. Side-Cutting Pliers
35-4012
■ Cross-hatched jaws so wires won’t slip when pulling
9-1/4 in. Side-Cutting Pliers w/Crimp and Fish Tape Puller
30-4430
■ Ergonomic handles for comfortable, all-day use
Description (Dipped Handles)
Cat. No.
7 in. Cutting Pliers
30-5419
8 in. Side-Cutting Pliers
30-5420
9-1/4 in. Side-Cutting Pliers
35-5012
9-1/4 in. Side-Cutting Pliers w/Crimp and Fish Tape Puller
30-5430
Diagonal-Cutting Pliers
35-5029
35-4028
■ Custom tool steel for durability
Description (Smart-Grip™ Handles)
Cat. No.
■ High leverage pivot requires less cutting force
6 in. Diagonal-Cutting Pliers
35-4026
■ Sharp, knife-to-knife blades for easy cutting
8 in. Diagonal-Cutting Pliers
35-4028
■ Induction hardened teeth for long life
8 in. Diagonal-Cutting Pliers w/Angled Head
35-4029
■ Ergonomic handles for comfortable, all-day use
Description (Dipped Handles)
Cat. No.
6 in. Diagonal-Cutting Pliers
35-5026
8 in. Diagonal-Cutting Pliers
35-5028
8 in. Diagonal-Cutting Pliers w/Angled Head
35-5029
1-800-435-0705 for Customer Service
www.idealindustries.com
C-21
Hand Tools
Side-Cutting Pliers
Long-Nose Pliers
Hand Tools
35-4038
35-5035
■ Custom tool steel for durability
Description (Smart-Grip™ Handles)
Cat. No.
■ High leverage pivot requires less cutting force
6 in. Long-Nose Pliers w/Strip & Crimp
35-4035
■ Sharp, knife-to-knife blades for easy cutting
6 in. Long-Nose Pliers
35-4036
■ Induction hardened teeth for long life
8 in. Long-Nose Pliers
35-4038
■ Cross-hatched jaws so wires won’t slip when pulling
Description (Dipped Handles)
Cat. No.
■ Ergonomic handles for comfortable, all-day use
6 in. Long-Nose Pliers w/Strip & Crimp
35-5035
6 in. Long-Nose Pliers
35-5036
8 in. Long-Nose Pliers
35-5038
Tongue and Groove Pliers
35-4430
35-5430
■ Custom tool steel for durability
Description (Smart-Grip™ Handles)
Cat. No.
■ Ergonomic handles for comfortable, all-day use
10 in. Tongue & Groove Pliers
35-4430
C-22
www.idealindustries.com
Description (Dipped Handles)
Cat. No.
10 in. Tongue & Groove Pliers
35-5430
1-800-435-0705 for Customer Service
Tools and Totes
30-4429
30-5431
■ Custom tool steel for durability
Description (Smart-Grip™ Handles)
Cat. No.
■ High-leverage pivot requires less force
9-1/4 in. Multi-Crimp Tool
30-4429
■ Ergonomic handles for comfortable, all-day use
9-1/4 in. Multi-Crimp Tool - Bare Terminals
30-4431
Description (Dipped Handles)
Cat. No.
9-1/4 in. Multi-Crimp Tool
30-5429
9-1/4 in. Multi-Crimp Tool - Bare Terminals
30-5431
Cable Cutters
35-4052
35-5052
■ Custom tool steel for durability
■ High-leverage pivot requires less force
Description (Smart-Grip™ Handles)
Cat. No.
■ Sharp, knife-to-knife blades for easy cutting
9 in. 2/0 Cable Cutter
35-4052
■ Induction hardened teeth for long life
■ Ergonomic handles for comfortable, all-day use
Description (Dipped Handles)
Cat. No.
9 in. 2/0 Cable Cutter
35-5052
Tenite Grips
■ Fits LASERedge™ and
WireMan™ Pliers
Description
Cat. No.
Replacement grips for 6 in. pliers (one pair)
35-006
■ Not insulated from
electrical shock
Replacement grips for 7 in. pliers (one pair)
35-007
Replacement grips for 8 in. or 9 in. pliers (one pair)
35-008
1-800-435-0705 for Customer Service
www.idealindustries.com
C-23
Hand Tools
Multi-Crimp Tools
Twist-a-Nut™ Screwdriver/Nutdriver
Textured Santoprene™ grip
provides excellent torque and
resists perspiration, water,
oil and chemicals
Patented Wire-Nut® Wrench
accepts a wide variety
of connectors.
Hand Tools
Six torsion bars provide
exceptional grip
Accu-Loop™ Wire
Looping Hole
(Image actual size.)
Patented Wire-Nut® Wrench accepts a wide variety of IDEAL wire connectors (and others) including:
Wing-Nut®
Wire-Nut®
Twister®
B-Cap®
9-in-1 Ratch-a-Nut™
Screwdriver
Accu-Loop™ Wire
looping holes
WingTwist™ / WireTwist™
7-in-1 Twist-a-Nut™
Screwdriver/Nutdrivers
■ Includes universal Wire-Nut® Wire
Connector Wrench in handle to
help install twist-on wire
connectors
Bo
E th
Ra nds
tch
et!
■ Includes wire-looping
hole in handle
■ Includes #1 & #2
Phillips, 1/4 in. & 3/16 in. slotted,
1/4 in. & 5/16 in. Nutdriver
■ Ratcheting wire
connector wrench
prevents finger fatigue
and gets in tight spots
■ #35-909 includes #1 & #2 Square Recess in place of
#1 & #2 Phillips
■ Premium screwdriver ratchet
mechanism can handle high
torque without failure
■ Twist-a-Nut™ handle is interchangeable with new conduit
deburrer head (#35-096) and 6-in-1 Tap Tool (#35-922)
■ Ergonomic, slip-free comfort grip
■ Accepts Twist-a-Nut™ replacement
bits
■ Includes: 1/4 in. and 3/16 in. slotted, #1 & #2 Phillips, 1/4 in., 5/16
in., 7/16 in. nutdrivers, ratcheting screwdriver end, ratcheting wire
connector wrench and wire-looping hole in handle
Description
9-in-1 Ratch-a-Nut™ Screwdriver
Cat. No.
35-988
Description
Cat. No.
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
35-908
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver with square tip
35-909
Replacement Bits (for both Ratch-a-Nut™ and Twist-a-Nut™)
Description
Cat. No.
1/4 in. slotted – #2 Phillips
35-911
3/16 in. slotted – #1 Phillips
35-912
1/4 in. slotted – #2 Square Recess
35-913
3/16 in. slotted – #1 Square Recess
35-914
#15 & #10 Torx®
35-915
Torx is a trademark of Camcar division of Textron, Inc.
®
C-24
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Twist-a-Nut™ Conduit
Deburring Tools
■ Deburrs inside and outside edges of 1/2 in.,
3/4 in. and 1 in. thin wall conduit
■ Convenient Wire-Nut® Wrench in end of
handle
■ Hooded tip tightens EMT fitting set screws
without slipping
■ Wire-looping hole in handle
■ Square tip “seats” much more quickly on fitting
screws than slotted version
■ Vapor-blasted tip prevents plate chipping
Accu-Loop™ wire
looping holes
Hand Tools
Twist-a-Nut™ Pro Electrician’s
Screwdrivers
■ Head removes and is interchangeable with
IDEAL 7-in-1 Twist-a-Nut™ Screwdriver
shaft (#35-908)
■ Tough, chrome vanadium steel shank
■ Precision ground tip provides secure fit in
screw slot
Description
Cat. No.
#2 x 4 in. Phillips
30-332
1/4 in. x 4 in. Slotted
30-331
1/4 in. x 6 in. Slotted Cabinet Tip
30-333
#2 x 6 in. Robertson
30-330
6-in-1 Twist-a-Nut™ Tapping Tool
■ Head can be used in drill or cordless
screwdriver
■ Universal Wire-Nut® Wire Connector
Wrench in handle end eases installation of
twist-on connectors
■ Lifetime guarantee (excludes blades)
35-098
Description
Cat. No.
Conduit Deburring Tool, slotted tip
35-083
Conduit Deburring Tool - head only, slotted tip
35-096
Conduit Deburring Tool - #2 square tip
35-075
Conduit Deburring Tool - head only, #2 square tip
35-098
Replacement Blades (2/pack)
35-097
Twist-a-Nut™ Conduit Wiring Kit
■ Forms new threads, re-forms burred threads and cleans out
obstructions
■ Reversible, high-carbon tap with three clearly marked thread
sizes on each end
■ Handle is interchangeable with 7-in-1 Screwdriver (35-908)
and Conduit Deburrer (35-083)
Description
Cat. No.
Twist-a-Nut™ Tapping Tool includes: 6-32, 8-32 & 10-32 on one
tapping side, 10-24, 12-24 & 1/4-20 on the other
35-922
Twist-a-Nut™ Shaft assembly includes: Collar, 35-422 & 35-423
35-923
1-800-435-0705 for Customer Service
■ Includes Twist-a-Nut™
Screwdriver (35-908),
Twist-a-Nut™
Deburring HeadSquare Tip (35-098),
Twist-a-Nut™ Tap Tool
Shaft (35-923), Three
Spare Bits (1/4 in.
slotted & #2 square,
3/16 in. slotted &
#1 square, #10 & #15
Torx®), 8-Pocket
Carrying Pouch
(35-927)
■ Nylon carrying pouch holds all three Twist-a-Nut™ tools plus
room for four replacement bits or taps
■ Strong easy-slide metal belt clip
Description
Cat. No.
Twist-a-Nut™ Combo Pack
35-926
Twist-a-Nut™ Carrying Pouch only
35-927
www.idealindustries.com
C-25
Cushioned-Grip Screwdrivers
Cushioned-rubber grip
Hand Tools
Special tip treatment for
precise fit
Chrome vanadium steel shank
(Image actual size.)
8-Piece
Screwdriver Set
5-Piece Screwdriver Set
Includes:
■ 1/4 in. x 6 in. HD Cabinet
Includes:
■ 1/4 in. x 6 in.
HD Cabinet
■ 1/4 in. x 4 in. Square
Shank HD Keystone
■ 1/4 in. x 4 in. Square
Shank HD Keystone
■ 5/16 in. x 6 in. Keystone
■ 1/4 in. x 4 in. HD Keystone
■ 3/16 in. x 6 in. Cabinet
■ 5/16 in. x 6 in. Keystone
■ Phillips #2 x 4 in.
■ 3/16 in. x 3 in. Cabinet
■ 3/16 in. x 6 in. Cabinet
■ Phillips #1 x 3 in.
■ Phillips #2 x 4 in.
Description
Cat. No.
8-Piece Screwdriver Set
35-298
C-26
www.idealindustries.com
Description
Cat. No.
5-Piece Screwdriver Set
35-297
1-800-435-0705 for Customer Service
Tools and Totes
Slotted Heavy-Duty
w/Keystone Tip
Slotted Keystone Tip
■ Vapor-blasted tip prevents plate chipping
■ Identification mark on ends
■ Larger shank for heavy-duty applications
■ Nickel-chrome plating for corrosion resistance
■ Vapor-blasted tip prevents plate chipping
■ Tough, chrome vanadium steel shank
■ Precision ground tip provides secure fit in screw slot
■ Cushioned rubber grips
■ Square-shank models offer wrench-assisted turning
■ Tough, chrome vanadium steel shank
Description
Blade Length
Total Length
Cat. No.
■ Cushioned rubber grips
1/4 in. Shank and tip
3 in.
7-3/8 in.
35-173
1/4 in. Shank and tip
6 in.
10-3/8 in.
35-176
Blade Length
Total Length
Cat. No.
1/4 in. Shank and tip
8 in.
12-3/8 in.
35-178
1/4 in. Shank and tip
4 in.
8-3/8 in.
35-154
1/4 in. Shank and tip
10 in.
14-3/8 in.
35-180
5/16 in. Shank and tip
6 in.
11 in.
35-156
3/8 in. Shank and tip
8 in.
13 in.
35-158
Blade Length
Total Length
Cat. No.
1/4 in. Shank and tip
1 in.
3-3/8 in.
35-161
1/4 in. Shank and tip
4 in.
8-3/8 in.
35-164
5/16 in. Shank and tip
6 in.
11 in.
35-166
3/8 in. Shank and tip
8 in.
13 in.
35-168
Square Shank
Round Shank
Slotted Heavy-Duty w/Cabinet Tip
Slotted Cabinet Tip
■ Vapor-blasted tip prevents plate chipping
■ Identification mark on ends
■ Precision ground tip provides secure fit in screw slot
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
Description
Blade Length
Total Length
Cat. No.
■ Large diameter shank for tough applications
3/16 in. Shank and tip
3 in.
6-3/4 in.
35-183
■ Identification marks on ends
3/16 in. Shank and tip
4 in.
7-3/4 in.
35-184
■ Vapor-blasted tip prevents plate chipping
3/16 in. Shank and tip
6 in.
9-3/4 in.
35-186
■ Precision ground tip provides secure fit in screw slot
3/16 in. Shank and tip
8 in.
11-3/4 in.
35-188
■ Nickel-chrome plating for corrosion resistance
3/16 in. Shank and tip
10 in.
13-3/4 in.
35-190
■ Tough, chrome vanadium steel shanks
■ Cushioned rubber grip
Description
Blade Length
Total Length
Cat. No.
1/4 in. Shank and tip
4 in.
8-3/8 in.
35-150
1/4 in. Shank and tip
6 in.
10-3/8 in.
35-151
1/4 in. Shank and tip
8 in.
12-3/8 in.
35-152
1/4 in. Shank and tip
10 in.
14-3/8 in.
35-153
1-800-435-0705 for Customer Service
www.idealindustries.com
C-27
Hand Tools
■ Precision ground tip provides secure fit in screw slot
■ Identification mark on ends
Hand Tools
Phillips
Square Head
■ Vapor-blasted tip prevents plate chipping
■ Precise tip for square-recess screws
■ Identification mark on ends
■ Color-coded handle for easy identification
■ Nickel-chrome plating for corrosion resistance
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
■ Cushioned rubber grip
Description
Blade Length
Total Length
Cat. No.
Description
Color Code
For Screw Sizes
Cat. No.
#1 Tip Phillips
3 in.
6-3/4 in.
35-193
#0 x 4 in.
Yellow
3, 4
35-690
#2 Tip Phillips
1 in.
3-3/8 in.
35-191
#1 x 4 in.
Green
5, 6, 7
35-691
#2 Tip Phillips
4 in.
8-3/8 in.
35-194
#1 x 8 in.
Green
5, 6, 7
35-692
#2 Tip Phillips
6 in.
10-3/8 in.
35-195
#2 x 4 in.
Red
8, 9, 10
35-693
#3 Tip Phillips
6 in.
11 in.
35-196
#2 x 8 in.
Red
8, 9, 10
35-694
#3 x 4 in.
Black
12, 14
35-695
#3 x 8 in.
Black
12, 14
35-696
Quick-Rotating
Awl
■ Heavy-duty construction for piercing, punching and scribing
■ Ideal for threading screws in switches, fixtures and anchors
■ Identification mark on ends
■ Identification mark on end
■ Cushioned rubber grip
■ One-handed crank action for quick and easy use
Description
■ Vapor-blasted tip prevents plate chipping
Blade Length
Total Length
Cat. No.
3 in.
6-3/4 in.
35-202
Awl
■ Precision-ground tip provides secure fit in screw slot
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
Screw-Holding
■ Cushioned rubber grip
Description
Total Length
Cat. No.
3/16 in. Shank and Tip
8-3/4 in.
35-200
#2 Phillips Tip and 1/4 in. Shank
9-3/4 in.
35-203
■ Split blade wedges into screw slot when collar is extended
■ Holds screw in place when installing in hard-to-reach locations
■ Tough, chrome vanadium steel shank and comfort grip handle
Description
C-28
www.idealindustries.com
Blade Length
Total Length
Cat. No.
3/16 in.
4 in.
8 in.
35-404
3/16 in.
6 in.
10 in.
35-406
3/16 in.
8 in.
12 in.
35-408
1-800-435-0705 for Customer Service
Tools and Totes
7-Piece
Nutdriver Set
Nutmaster® Nutdrivers
Includes:
■ 3/16 in. x 3-1/4 in.
■ 1/4 in. x 3-1/4 in.
■ 5/16 in. x 3-1/4 in.
■ 3/8 in. x 3-1/4 in.
■ Identification and color coding on ends
■ 7/16 in. x 4 in.
■ Nickel/chrome plated to resist rust
and corrosion
■ 1/2 in. x 4 in.
■ Cushioned rubber grips
Description
Cat. No.
■ Models 35-292 and 35-295 fit
Twister® Wire Connectors
7-Piece Nutdriver Set
35-299
Description
Shaft Length
Color
Cat. No.
3/16 in.
3-1/4 in.
Black
35-290
1/4 in.
3-1/4 in.
Red
35-291
5/16 in.
3-1/4 in.
Yellow
35-292
11/32 in.
3-1/4 in.
Green
35-293
3/8 in.
3-1/4 in.
Blue
35-294
7/16 in.
4 in.
Brown
35-295
1/2 in.
4 in.
Red
35-296
10-in-1 Screwdriver/Nutdriver
■ Includes 1/4 in. slotted, #2
Phillips, 3/16 in. slotted,
#1 Phillips, #1 & #2
square recess, #15 and
#10 Torx® and 5/16 in. &
1/4 in. Nutdriver
■ Cushion grip for comfort and
performance
Description
Cat. No.
10-in-1 Screwdriver/Nutdriver
35-910
Replacement Bits (for 10-in-1 Screwdriver)
Slim Electronics
Description
Cat. No.
1/4 in. slotted – #2 Phillips (2/pack)
35-940
3/16 in. slotted – #1 Phillips (2/pack)
35-941
#1 & #2 Square Recess (2/pack)
35-942
#15 & #10 Torx (2/pack)
35-943
®
■ Designed for maximum
handling comfort when
working in tight areas
Torx® is a trademark of Camcar division of Textron, Inc.
5-in-1 Screwdriver/Nutdriver
■ Tough, chrome vanadium steel shank
■ Phosphate tip for longer wear life
■ Contains: 5/16 in. nutdriver,
#1 Phillips, #2 Phillips,
9/32 in. slotted
and 3/16 in. slotted
■ Rotating cap for optimum control for precise centering
■ Color-coded cap for easy identification
Description
3/32 in.
Style
Blade Length
Cat. No.
Cabinet Tip
2-1/2 in.
36-240
■ Cushion grip for
performance and
comfort
3/32 in.
Cabinet Tip
3 in.
36-241
1/8 in.
Cabinet Tip
4 in.
36-242
1/8 in.
Cabinet Tip
6 in.
36-243
Description
Cat. No.
5/32 in.
Cabinet Tip
4 in.
36-244
5-in-1 Screwdriver/Nutdriver
35-905
5/32 in.
Cabinet Tip
6 in.
36-245
#0 – 1/8 in.
Phillips head
2-1/2 in.
36-246
Description
Cat. No.
7-Piece Set includes one each of 36-240 thru 36-246
36-248
#1 Phillips – 3/16 in. slotted
LA-4123
4-Piece Set includes one each of 36-240, -241, -242 & -246
36-249
#2 Phillips – 9/32 in. slotted
LA-4124
1-800-435-0705 for Customer Service
Replacement Bits (for 5-in-1 Screwdriver)
www.idealindustries.com
C-29
Hand Tools
■ 11/32 in. x 3-1/4 in.
■ Long, hollow shank handles longer bolts
Ratcheting Cable Cutter
PowerBlade™ Cable Cutter
■ Cuts hard drawn copper up to 400 KCMIL
(MCM) and soft copper, aluminum and multiple
conductor cable up to 600 KCMIL (MCM)
■ Hardened steel blades ensure consistent
cuts and long-term durability
■ Rounded blade design minimizes
cable distortion during cutting
■ Quick release mechanism simplifies blade back-out
(Drill not included)
■ Locking mechanism keeps handles closed for easy storage
Hand Tools
(Folding handle for storage.)
■ Extremely versatile: fits almost any drill
(12V minimum)
■ Cuts up to 750 MCM hard - drawn copper, 1000 MCM
aluminum*
■ Heavy-duty gears and specially hardened blades for
professional quality
■ No need to mess with battery packs or special chargers; this
tool works with the drill you already carry!
Cat. No.
PowerBlade™ Cable Cutter
Cat. No.
400 KCMIL (MCM) Ratcheting Cable Cutter*
35-056
Replacement blade (moveable side only)
35-085
*Max. Jaw Opening - 1.375 in. Not for cutting steel or ASCR.
Ratcheting Cable Cutter
■ Rounded blade design minimizes cable distortion during
cutting
Description
Description
35-078
PowerBlade™ Replacement Handle
K-8947R
PowerBlade™ Replacement Blades (pair)
K-8906R
PowerBlade™ Replacement Torque Arm Assembly
K-8909
PowerBlade™ Replacement Carrying Case
K-8926
■ 750 KCMIL Ratcheting Cable Cutter is
designed to cut 750 KCMIL (MCM)
and smaller hard-drawn copper and
aluminum cables
■ Hardened steel blades
ensure consistent cuts and
long-term durability
■ Rounded blade design minimizes
cable distortion during cutting
■ Quick release mechanism
simplifies blade back-out
■ Locking mechanism keeps handles closed for easy storage
*Max. Jaw Opening - 2 in. Not for cutting steel or ASCR.
■ Molded-in foot provides stability and leverage when making
multiple cuts
Long-Arm Cable Cutters
■ High strength forged blades for
ultimate durability
Cat. No.
750 KCMIL (MCM) Ratcheting Cable Cutter*
35-053
Replacement blade (moveable side only)
35-057
*Max. Jaw Opening - 2 in. Not for cutting steel or ASCR.
■ Precision-ground jaws make
clean cuts with minimal cable
distortion
Telco Ratcheting Cable Cutters
■ Telco Ratcheting Cable Cutter jaw cuts
up to 2,700 pair telephone cable and
Stalpath® type communications cable
■ Replaceable blades
■ For copper and aluminum
only. Not designed for
steel or ACSR.
Description
Description
■ Hardened steel blades ensure
consistent cuts and long-term
durability
Length
Cat. No.
250 MCM Long-Arm Cable Cutter
14 in.
35-031
500 MCM Long-Arm Cable Cutter
22 in.
35-032
1000 MCM Long-Arm Cable Cutter
32 in.
35-033
Replacement Head – 250 MCM (for 35-031)
—
35-031B
Replacement Head – 500 MCM (for 35-032)
—
35-032B
Replacement Head – 1000 MCM (for 35-033)
—
35-033B
CAUTION: Comfort-grip handles are not designed for protection
against electrical shock. Do not use on live circuits.
■ Rounded blade design
minimizes cable distortion
during cutting
■ Quick release mechanism
simplifies blade back-out
■ Locking mechanism keeps
handles closed for easy storage
■ Molded-in foot provides stability and leverage when making
multiple cuts
Description
Cat. No.
Telco Ratcheting Cable Cutter*
35-055
Replacement blade (moveable side only)
35-054
*Max. Jaw Opening - 3 in. Not for cutting steel or ASCR.
C-30
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Buchanan Construction Products
Four-Way Crimp Tool
Mechanical Indentor and
Crimp Tool
■ Patented design ensures
even compression and
reliable connections
■ Spring-loaded,
cam-actuated plungers
■ Use with aluminum (6 AWG to 4/0) and copper
(8 AWG to 250 KCMIL) wires
■ Fingertip adjustment for
different connector sizes
■ Lightweight and easy to operate
Description
■ Rugged cast steel construction for long-term durability
Four-Way Crimp Tool
■ Connections are UL Listed when using this tool with IDEAL
Non-Insulated Terminals (#8 - #4 AWG).
Description
Cat. No.
Mechanical Indentor
88-843
Cat. No.
C-24
Ratchet Crimp Tool
■ Crimps insulated or bare
terminals and splices on
10 to 22 AWG wire
■ Ratchet action
prevents release prior
to crimp connection —
helps ensure uniform crimps
Heavy-Duty Crimp Tool
■ Vinyl-coated handles provide a solid,
comfortable grip
■ Crimp nests for 2, 4, 6 or 8 AWG and 8-38 mm2 uninsulated
terminals
■ Rotating crimp nests eliminate costly die changes
■ Decimal and metric wire sizes clearly marked on each crimp nest
■ Comfort-grip handles for a secure grip
■ Connections are UL Listed when using this tool with IDEAL
Non-Insulated Terminals (#8 - #4 AWG).
Description
Cat. No.
Heavy-Duty Crimp Tool
83-005
Description
Cat. No.
Ratchet Crimp Tool
83-001
Rotary BX/MC Cutters
■ Handles all common BX,
MC and Flex cables
■ Blue sapphire blade cuts
armor without damage to
internal conductors
■ Splices cleanly through
casings with only a
few turns
■ Thumbscrew holds cable
securely in place
Crimp Tool
35-780
35-782
■ Epoxy-coated to resist
corrosion
■ Handle knob stores up to
six replacement blades
■ Crimps all IDEAL crimp sleeves
Description
Cat. No.
Rotary BX/MC Cutter
35-780
Replacement blades (5 per pack)
35-781
Rotary BX/MC Cutter with Lever
35-782
■ Excellent leverage for right-angle, double-indent crimps
■ Cuts and twists wire
■ Vinyl-coated handles provide a solid, comfortable grip
Description
Cat. No.
Crimp Tool - 10-1/4 in.
30-425
1-800-435-0705 for Customer Service
www.idealindustries.com
C-31
Hand Tools
■ Adjustable crimping nests with clearly marked gauges
Wire Preparation
Adjustable Wrenches
IDEAL Wipes™
The Multi-Purpose Towel
■ Pre-moistened wipes require no water
■ Cleans dirt, grease, lube and grime
35-021
35-020
■ Durable fabric scrubs without tearing
■ Narrow profile head reaches into tight spaces
■ Infused with natural hand moisturizers
and Vitamin E
■ Tight tolerance on thumbscrew won’t loosen or wobble with use
■ Orange citrus scent
■ Extra wide jaw capacity with standard and metric markings
Hand Tools
Description
■ Lightweight, non-conductive handle (not insulated)
IDEAL Wipes™, 12 in. x 9 in.
Description
Jaw Capacity
Cat. No.
8 in. Adjustable Wrench
1-1/8 in.
35-020
10 in. Adjustable Wrench
1-5/16 in.
35-021
Qty.
Cat. No.
82/can
38-500
Fiberglass-Handled Hammer
6-in-1 Twist-a-Nut™
Tapping Tool
■ One-piece drop-forged, tempered-steel polished
head and handle
■ Forms new threads,
re-forms burred threads
and cleans out
obstructions
■ Long, straight claws simplify removal of electrical fixtures
■ Comfortable, perforated anti-vibe grips
■ Reversible, high-carbon
tap with three clearly
marked thread sizes on
each end
■ Electrician’s version has elongated neck for hitting inside boxes
■ Handle is interchangeable with 7-in-1 Screwdriver (35-908)
and Conduit Deburrer (35-083)
Description
Cat. No.
18 oz. x 12-1/2 in. Electrician’s Fiberglass-handled Hammer
35-210
Description
Cat. No.
Electric Engraving Tools
6-32, 8-32 & 10-32 on one tapping side,
10-24, 12-24 & 1/4-20 on the other
35-922
Twist-a-Nut™ Shaft assembly includes: Collar, 35-422 & 35-423
35-923
■ Low-cost, industrial-quality marker quickly and
easily engraves metal, glass, stone, ceramics,
plastics, hard rubber, wood and many
other hard materials
■ Unique design reduces bouncing
and provides smooth, easy writing
Triple-Tap Tools
■ Operates at 7,200 strokes per minute
■ Cleans and chases
burred threads
■ Stroke adjusts to vary depth of mark
■ Includes carbide-tipped point for
normal markings
■ Taps three hole sizes
Color Code
Thread Sizes
Cat. No.
Blue
10/24, 8/32, & 6/32
35-411
Orange
10/32, 8/32, & 6/32
35-412
Replacement Taps (for 35-922, 35-411 and 35-412)
Thread Sizes
Replacement Tap
Cat. No.
■ Diamond point available for engraving extra-hard materials
(50 to 64 Rockwell, scale C)
Description
Cat. No.
Engraver w/carbide-tipped point — 120V, 60 Hz
11-111
Engraver w/carbide-tipped point & 3-conductor grounded
cord & plug — 120V, 60 Hz
11-113
10/24, 8/32, & 6/32
35-421
Engraver w/carbide-tipped point — 220V, 50 Hz
11-115
10/32, 8/32, & 6/32
35-422
Carbide-tipped replacement point
11-200
10/24, 12/24 & 1/4-20
35-423
Diamond replacement point
11-201
C-32
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Automatic Blade Lock
Measuring Tape
Hex-Key Sets
■ Blade automatically stays out when
extended
■ 8650 steel construction
■ Push button for smooth blade retraction
■ Internal tension spring and belt loop
■ One-piece, chrome-plated handle
Description
Cat. No.
Auto-Lock™ Tape Measure - 25 ft.
35-242
Magnetic-Tip Measuring Tape
■ Strong magnetic tip for one person
measurement
■ Durable nylon coated blade
Description
Cat. No.
3 in. handle w/eight 2-in. keys (.050 in., 1/16 in., 5/64 in.,
3/32 in., 7/64 in., 1/8 in., 9/64 in. & 5/32 in.)
35-145
4 in. handle w/nine 3-in. keys (5/64 in., 3/32 in., 7/64 in., 1/8 in.,
9/64 in., 5/32 in., 3/16 in., 7/32 in. & 1/4 in.)
35-146
5-1/4 in. handle w/five 5-in. keys (3/16 in., 7/32 in., 1/4 in.,
5/16 in. & 3/8 in.)
35-147
■ Full rubber jacket protects case
Description
Cat. No.
Mag-Tape™ Tape Measure - 25 ft.
35-238
Utility Knife
■ Quick-change retractable blade
system — no disassembly required
Mini Laser Level
■ Built in pull-line cutter
■ Includes three blades in
storage compartment
■ Super bright 635nm laser shoots red dot or horizontal line
Description
Cat. No.
Utility Knife
35-300
Replacement blades – Universal (10/pack)
35-301
Pocket Knives
■ Durable cast aluminum body
■ Rare earth magnet for superior holding power
■ Compact size for easy use and storage
■ Levels and aligns conduit, electrical boxes and stud holes
Description
Cat. No.
Mini Laser Level
35-207
Torpedo Level
Electrician’s Knife
Hawkbill Knife
Linesman Knife
■ 2-1/4 in. blade locks in position
■ High-carbon stainless steel blade construction for extra
strength and durability
■ Durable Buyrate® non-slip handle
■ 9 in. aluminum frame with magnetic and V-grooved edges
■ White windows provide easy reading of plumb level and 45°
mitre in dim lighting
Description
9 in. Torpedo Level
1-800-435-0705 for Customer Service
■ Brass liners
Description
Cat. No.
Electrician’s Knife w/spearpoint and screwdriver blade
35-285
Cat. No.
Hawkbill Knife w/curved blade
35-286
35-205
Lineman’s Jack Knife w/sheepfoot blade
35-287
www.idealindustries.com
C-33
Hand Tools
■ Comfortable, shock-resistant rubber grip
Tool Kits
featuring
Pliers
17-Piece Set - #35-809
Set Includes:
Hand Tools
• Four LASERedge Pliers with Smart-Grip™ Handles (9-1/4” Linesman w/fish
tape puller, 8” Long Nose, 10” Tongue and Groove, 9-1/2” Cable Cutter)
• Kinetic™ Reflex™ T®-Stripper Wire Stripper
• 7-in-1 Twist-A-Nut™ Screwdriver
• Five Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips, 3/16” x 6
Slotted Cabinet Tip, 1/4” x 4 Slotted round shank, 3/16” x 6 Screw holding
slotted)
• Hawkbill Knife
• Electrician’s Hammer
• 25' Auto-Lock™ Tape Measure
• Torpedo Level
• Vol-Con® XL Voltage/Continuity Tester
• Tuff-Tote™ Premium Leather Tool Carrier
13-Piece Set - #35-790
Set Includes:
• Three LASERedge Pliers with Smart-Grip™ handles
(9-1/4” Linesman w/fish tape puller, 8” Long Nose, 10” Tongue and
Groove)
• Kinetic™ Reflex™ T®-Stripper Wire Stripper
• Four Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips,
3/16” x 4 Slotted Cabinet Tip, 1/4” x 4 Slotted round shank)
• 25' Auto-Lock™ Tape Measure
• Hawkbill Knife
• Medium Size Fuse Puller
• Torpedo Level
• Journeyman Electrician’s Tote™
16-Piece Set - #35-800
Set Includes:
• Five LASERedge Pliers with dipped grips (9-1/4” Linesman w/ crimper,
8” Offset Diagonal, 8” Long Nose, 10” Tongue and Groove,
2/0 Cable Cutter)
• Premium T®-5 T®-Stripper Wire Stripper
• 7-in-1 Twist-A-Nut™ Screwdriver
• Two Cushion Grip Screwdrivers (#2 x 4 Phillips, 1/4 x 4 Slotted round shank)
• Twist-A-Nut™ Conduit Deburring Tool
• Electrician’s Hammer
• 25' Auto-Lock™ Tape Measure
• Electrician’s Knife
• Vol-Con® XL Voltage/Continuity Tester
• Replacement battery
• Tuff-Tote™ Leather Tool Pouch
C-34
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Tool Kits
featuring
Pliers
16-Piece Set - #35-808
• Four LASERedge Pliers with dipped grips (9-1/4” Linesman w/fish tape
puller, 8” Long Nose, 10” Tongue and Groove, 9-1/2” Cable Cutter)
• Reflex™ T®-5 T®-Stripper Wire Stripper
• Combo Crimp/Strip Tool
• Four Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips,
3/16” x 6 Slotted Cabinet Tip, 1/4” x 4 Slotted round shank)
• Electrician’s Hammer
• 25' Auto-Lock™ Tape Measure
• Pocket Fuse Puller
• Hawkbill knife
• Ergonomic Hacksaw
• 18” Large Mouth Bag
12-Piece Set - #35-805
Set Includes:
• Four LASERedge Pliers with dipped grip handles (9-1/4” Linesman w/fish
tape puller, 8” Diagonal, 8” Long Nose, 10” Tongue and Groove)
• Premium T®-5 T®-Stripper Wire Stripper
• Four Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips, 3/16” x 4
Slotted Cabinet Tip, 1/4” x 4 Heavy-Duty Slotted round shank)
• 25' Auto-Lock™ Tape Measure
• Electrician’s Leather Tool Pouch
• Web Belt
6-Piece Set - #35-794
Set Includes:
• One LASERedge Plier with dipped grip handles
(9-1/4” Linesman w/crimper)
• Premium T®-5 T®-Stripper Wire Stripper
• 7-in-1 Twist-a-Nut™ Screwdriver
• 25' Auto-Lock™ Tape Measure
• Utility Knife
• Pocket Pal™ Tool Holster
1-800-435-0705 for Customer Service
www.idealindustries.com
C-35
Hand Tools
Set Includes:
Tool Kits
featuring
Pliers
13-Piece Set - #35-4790
Set Includes:
Hand Tools
• Three WireMan™ Pliers with Smart-Grip™ handles (9-1/4” Linesman w/
crimper, 8” Long Nose, 10” Tongue and Groove)
• Kinetic™ Reflex™ T®-Stripper Wire Stripper
• Four Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips,
3/16” x 4 Slotted Cabinet Tip, 1/4” x 4 Slotted round shank)
• 25' Auto-Lock™ Tape Measure
• Hawkbill knife
• Pocket Fuse Puller
• Torpedo Level
• Journeyman Electrician’s Tote™
15-Piece Set - #35-5800
Set Includes:
• Five WireMan™ Pliers with dipped grips (9-1/4” Linesman w/ crimper,
8” Offset Diagonal, 8” Long Nose, 10” Tongue and Groove,
2/0 Cable Cutter)
• Premium T®-5 T®-Stripper Wire Stripper
• 7-in-1 Twist-a-Nut™ Screwdriver
• Two Cushion Grip Screwdrivers (#2 x 4 Phillips, 1/4 x 4 Slotted round shank)
• Electrician’s Hammer
• 25' Auto-Lock™ Tape Measure
• Electrician’s Knife
• Vol-Con® XL Voltage/Continuity Tester
• Replacement battery
• Journeyman Electrician’s Tote™
12-Piece Set - #35-5805
Set Includes:
• Four WireMan™ Pliers with dipped grip handles (9-1/4” Linesman,
8” Diagonal, 8” Long Nose, 10” Tongue and Groove)
• Premium T®-5 T®-Stripper Wire Stripper
• Four Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips, 3/16” x 4
Slotted Cabinet Tip, 1/4” x 4 Slotted round shank)
• 25' Auto-Lock™ Tape Measure
• Electrician’s Leather Tool Pouch
• Web Belt
C-36
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Tool Kits
featuring
Pliers
16-Piece Set - #35-5808
• Four WireMan™ Pliers with dipped grips (9-1/4” Linesman w/crimper,
8” Long Nose, 10” Tongue and Groove, 2/0 Cable Cutter)
• Kinetic™ Reflex™ T®-Stripper Wire Stripper
• Five Cushion Grip Screwdrivers (#1 x 3 Phillips, #2 x 4 Phillips,
3/16” x 4 Slotted Cabinet Tip,1/4” x 4 Slotted round shank, 3/16” x 4
Screw holding slotted screwdriver)
• Electrician’s Hammer
• 25' Auto-Lock™ Tape Measure
• Pocket Fuse Puller
• Hawkbill Knife
• Torpedo Level
• 18” Large Mouth Bag
5-Piece Set - 35-5792
Set Includes:
• One WireMan™ Plier with dipped grip handles (9-1/4” Linesman
w/crimper)
• T®-5 T®-Stripper Wire Stripper
• Two Screwdrivers (#2 x 4 Phillips, 3/16” x 4 Slotted Cabinet Tip)
• Pocket Pal™ Tool Holster
4-Piece Set - 35-5793
Set Includes:
• One WireMan™ Plier with dipped grip handles (9-1/4” Linesman
w/crimper)
• T®-5 T®-Stripper Wire Stripper
• 7-in-1 Twist-a-Nut™ Screwdriver
• Pocket Pal™ Tool Holster
1-800-435-0705 for Customer Service
www.idealindustries.com
C-37
Hand Tools
Set Includes:
Tuff-Tote™ Tool Carriers
Premium Leather Line
Top of the line tool carriers are
handcrafted from heavy, top-grain
cowhide and slow tanned in
natural oils to enhance the leather’s
inherent strength. Each bag is hand
waxed for lasting protection against
stains and moisture and is
warranted for life. Natural or
black leather – your choice.
Hand Tools
Standard Leather Line
Leather that stands up to the job like no
other material, these tool carriers are
constructed of top-grain, natural cowhide
and tanned for added strength and
durability. Watch their color age to a deep
tan over the years.
■ Convenient 6 in. x 8 in. tool carrier with four center screwdriver
slots, two interior compartments, two divided outside pockets
and four outside tool loops
■ Exclusive leather grab handle for carrying comfort
■ Removable shoulder strap helps relieve lower back strain
■ Unique stand-alone design keeps tools standing upright for
easy identification and access
Fabric Line
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
Durable, lightweight, portable tool
totes in rugged nylon polyester or
heavyweight canvas provide the
perfect tool storage. Convenient
pockets mean easy access; inner
compartments keep your tools
organized and safe when not
in use.
■ Oil and moisture-resistant reinforced bottom
Description
Cat. No.
Premium Leather Carrier w/shoulder strap
35-969
Premium Black Leather Carrier w/shoulder strap
35-969BLK
Tuff-Tote™ Tool Pouches
Tuff-Tote™ Ultimate Tool Carriers
■ Eight-inch square tool carrier features two divided inside
compartments with six screwdriver loops each, one large center
compartment, four outside pockets and eight outside tool loops
■ Exclusive leather-wrapped grab handle for carrying comfort
■ Eight-pocket, belt-mounted pouch features large utility compartment
with two dividers and six screwdriver loops, seven outside pockets,
release snaps and tape chain
■ Removable shoulder strap helps relieve lower back strain
■ Exclusive leather grab handle for carrying comfort
■ Unique stand-alone design keeps tools standing upright for
easy identification and access
■ Removable shoulder strap helps relieve lower back strain
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
■ Oil and moisture-resistant reinforced bottom
Description
Premium Leather Carrier w/shoulder strap
Premium Black Leather Carrier w/shoulder strap
Standard Leather Carrier w/shoulder strap
C-38
www.idealindustries.com
Cat. No.
35-975
35-975BLK
35-325
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
■ Tunnel belt loop accommodates belts up to 2-1/4 in. wide
Description
Premium Leather Pouch w/shoulder strap
Premium Black Leather Pouch w/shoulder strap
Standard Leather Pouch w/shoulder strap
Cat. No.
35-950
35-950BLK
35-311
1-800-435-0705 for Customer Service
Tools and Totes
Electrician’s Tool Pouch
Shoulder Straps
■ Seven-pocket tool pouch
■ Full length belt tunnel
■ Chain tape lanyard
Description
Electrician’s Tool Pouch
Cat. No.
10-466
■ 2-in. wide shoulder pad for added comfort
Description
Cat. No.
Premium Leather Strap
Hip Holster Tool Pouches
35-965
Premium Black Leather Strap
35-965BLK
Standard Leather Strap
■ Compact, multi-pocket holsters
35-338
■ Heavy-duty leather construction
■ Riveted corners for long life
Belts
■ Tape measure holder
Description
6-Pocket Hip Holster, Black
3-Pocket Hip Holster, Standard
Cat. No.
35-784BLK
35-964
35-316
35-995
Tuff-Tote™
Cell Phone Pouches
35-903
■ Fits most phones
■ Closing flap for added security
and protection
35-995BLK
■ Convenient belt strap
Description
Cat. No.
Premium Leather Pouch w/belt strap
35-958
Premium Black Leather Pouch w/belt strap
10-398
■ Nickel-plated hardware for long-term durability and corrosion
resistance
35-958BLK
Description
Cat. No.
Premium Leather Belt – 2 in. x 48 in.
35-995
Premium Black Leather Belt – 2 in. x 48 in.
Tuff-Tote™
Tester Pouches
35-995BLK
Premium Leather Belt w/Clasp Buckle – 2 in. x 48 in.
35-903
Standard Leather Belt – 1-3/4 in. x 46 in.
35-316
Web Belt
10-398
■ Fits most hand-held testers
■ Easy-access top
Hammer Holder
■ Convenient belt strap
■ Heavy-duty leather construction
■ Riveted steel hammer loop
Note: Tester sold separately
Description
Cat. No.
Premium Leather Pouch w/belt strap
35-956
Premium Black Leather Pouch w/belt strap
Standard Leather Pouch w/belt strap
1-800-435-0705 for Customer Service
35-956BLK
35-339
■ Fits on all sizes of tool belts
Description
Hammer Holder
Cat. No.
10-399
www.idealindustries.com
C-39
Hand Tools
■ Nickel-plated hardware for long-term durability
and corrosion resistance
Pocket Pal™ Tool Holster
Divider Pouch™ Small Parts Bag
■ Protects pocket from sharp tools
■ Designed to provide perfect
small parts storage — keeps
parts separate and organized
■ Doubles tool carrying capacity
■ Can be worn in pocket or on belt
■ Six internally divided 5-in.
deep pockets
■ Convenient drawstring protects
contents from spillage
■ Convenient handle loop
■ Sized to stack in 5-gallon buckets
Hand Tools
Description
Cat. No.
Pocket Pal™ Tool Holster
35-505
Note: Tools sold separately.
■ Durable nylon polyester construction
Description
Cat. No.
Divider Pouch™
35-655
Note: Wire Connectors sold separately.
Belt Bag™ Supplies Pouch
Bucket Bag Tool Carrier
■ Holds wire connectors, staples,
and other supplies ready for use
on the job
■ 11-1/2 in. deep bag fits over
the rim of a standard 5-gallon
bucket
■ Easy access opening closes
automatically to keep supplies safely
retained until needed
■ Forty-three convenient
pockets — 36 pleated outside
and inside pockets
■ Rugged nylon polyester
construction
Description
Cat. No.
Belt Bag™ Supplies Pouch
35-405
Description
Cat. No.
Bucket Bag Tool Carrier
35-665
Note: Tools sold separately.
Zipper Pouches
Supplies Apron
■ Durable, water resistant material
■ Two pockets for connectors and fasteners, each 8 in. x 15 in.
■ Heavy duty, self-repairing zippers
■ Natural duck construction
Description
Cat. No.
Zipper Pouch 10-1/2 in. long
35-402
Description
Cat. No.
Zipper Pouch 12-1/2 in. long
35-403
Supplies Apron
35-474
C-40
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Large Mouth Bags
Journeyman Electrician’s Tote™
■ Top opens completely for easy access
to large tools — reinforced to hold
itself open
■ Compact and versatile design
■ Carry as a hand-tote,
shoulder-tote or tool-belt
■ Measures 9 in. wide x 12 in. deep
with outside and inside pockets
for convenient hand tool storage
■ Includes removable
shoulder strap and belt
■ Removable shoulder
strap
■ Durable multi-ply
construction
Description
Cat. No.
Journeyman Electrician’s Tote™
35-462
Master Electrician’s Tote™
■ Spacious and durable design
■ Organizes and displays tools for
fast access
Description
Cat. No.
Large Mouth Bag – 13 in. long
35-410
Large Mouth Bag – 16 in. long
35-418
Large Mouth Bag – 18 in. long
35-427
Large Mouth Bag – 20 in. long
35-431
Large Mouth Bag – 24 in. long
35-463
Note: Tools sold separately.
Tool Carrier™/Electrician’s Carrier™
Tool Bags
■ Stitched outer pockets provide convenient storage and quick
access for frequently used tools
■ Includes removable shoulder
strap
■ Durable multi-ply
construction
Description
Cat. No.
Master Electrician’s Tote™
35-441
Mechanic’s Tool Bag
■ Eight narrow inside pockets designed to hold small tools
■ Heavy-duty, 18 oz. canvas construction
■ Two side pockets with closeable snaps for large tools or loose
items
■ Velcro® closure protects contents from loss
■ Double inside liner and rigid bottom prevent bag distortion
■ Durable nylon polyester construction
Description
Cat. No.
Tool Carrier™ Tool Bag – 7-1/2 in. D x 17 in. L x 6-1/4 in. W
35-533
Description
Cat. No.
35-534
Mechanic’s Tool Bag
35-535
Electrician’s Carrier™ Tool Bag – 10 in. D x 17 in. L x 6-1/4 in. W
Note: Tools sold separately.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-41
Hand Tools
■ Durable multi-ply
construction
■ Rugged zipper closure helps
prevent tool loss
Insulated Tools
The IDEAL insulated tool line creates a perfect blend of safety, comfort and precision functionality. Each tool features double insulated Santoprene®
handles with a soft, easy-to-grip outer surface. In addition to the ergonomic qualities found in our tools, the insulated coating process acts as an
‘at-a-glance’ safety check. If the orange outer coating reveals any of the inner yellow surface, an electrician will know that this tool needs to
be replaced.
Tools feature:
■ First UL tested and classified insulated pliers
■ Individually tested and VDE certified to 1000V AC (1500V DC)
■ Meets OSHA requirements for insulated tools
High visibility ergonomic
handles for maximum comfort
and control
C
Serrated jaws provide secure
gripping surface
Cutting jaws and edges
are laser hardened
for greater strength
and durability
SSIFIE
LA
UL
D
Insulated Hand Tools
■ Each one designed and tested to meet ASTM F1505-01, EN DIN, and IEC 60 900 test standards
®
Precision-ground
tips provide secure
fit for less spin-out
High carbon tool
steel for precision
durability
Molded on insulation
provides permanent
bonding
Non-slip guard
for added safety
Textured Santoprene® handles
provide a sure grip and are resistant
to perspiration, water, oil and
chemicals
Tempered chrome vanadium tool steel
blades are super hardened for maximum
quality
Permanently bonded,
double insulated handles
for added safety
Whenever possible, always de-energize lines and equipment
prior to working on or around them. 1000V insulated tools are
designed only to reduce the chance of injury where the tool may make contact with
an energized source. Work around energized circuits should only be done when
absolutely necessary and only by qualified technicians. Property damage, personal
injury or death may result if the following warnings are not heeded:
• Do not use any insulated tool if the insulation cracks, breaks or becomes damaged in any way. Destroy all dual-layer tools if the inner yellow layer shows
through the orange outer layer.
• Do not touch the uninsulated portion of an insulated tool or any conductive
object when either might contact an energized source.
• Tools must be kept clean and dry for proper insulating properties.
• Always inspect insulated tools before use.
• Use additional protection by wearing protective clothing and approved eye protection.
• Always use tools that are specifically designed for the task.
• These tools meet UL 22PP, ASTM F1505-01 and IEC 60900 standards for insulated tools.
• Always follow OSHA 1910 S and NFPA 70E safety requirements when
doing electrical work.
C-42
www.idealindustries.com
REGULATIONS
Testing:
• Every 1000V insulated tool we sell is individually tested to ensure no failure when subjected to live current.
UL and VDE Certification:
Listed below are some of the tests we perform in order to pass certification:
• Tools are immersed in water for 24 hours, then tested under current for 3 minutes
to ensure no current leakage or sparkover occurs.
• After being stored for 168 hours at -40° C (-40° F), tools are dropped to ensure no
damage from impact.
• After being stored for 168 hours at +70° C (158° F), a tensile load is applied to
ensure the grip is firmly bonded to the tool.
• Tools are subjected to flame for 10 seconds to ensure no flammability of the
insulating material.
OSHA Regulations:
OSHA 1910.335(a)(2)(i) When working near exposed energized conductors or circuit
parts, each employee shall use insulated tools or handling equipment if the tools
or handling equipment might make contact with such conductors or parts.
OSHA 1910.335 (a)(1)(i) Employees working in areas where there are potential electrical
hazards shall be provided with, and shall use, electrical protective equipment that is
appropriate for the specific parts of the body to be protected and for the work to be performed.
Make sure you are in compliance by providing and using IDEAL insulated tools!
1-800-435-0705 for Customer Service
Tools and Totes
26-Piece Journeyman Kit - #35-9302
Kit Includes:
• Four insulated pliers (9-1/4 in. Linesman w/crimper, 8 in. Offset diagonal,
8-1/2 in. Long Nose, 10 in. Tongue and Grove)
• Six insulated nutdrivers (3/16 x 5 in., 1/4 x 5 in., 5/16 x 5 in., 3/8 x 5 in.,
7/16 x 5 in., 1/2 x 5 in.)
• 9-1/2 in. insulated High-Leverage Cable Cutter
• 9-3/4 in. insulated Multi-Crimp Tool
• Insulated Reflex™ Super T®-Stripper
Wire Stripper
• Insulated Wire Stripper Cutter
• Insulated Electrician’s Skinning Knife
• Volt-Sensor® NCV Tester
• 7-1/2 in. Non-Conductive Fuse Puller
• Heavy-Duty Soft Tool Case
18-Piece Standard Kit - #35-9301
Kit Includes:
• Four insulated pliers (9-1/4 in. Linesman w/crimper, 8 in.
Offset diagonal, 8-1/2 in. Long Nose, 10 in. Tongue and Grove)
• Eight insulated screwdrivers ( 1/8 x 3 in. slotted, 3/16 x 5 in. slotted,
1/4 x 6 in. slotted, 5/16 x 6 in. slotted, 3/8 x 8 in. slotted, #1 x 3
Phillips, #2 x 4 in. Phillips, #3 x 6 in. Phillips)
• 9-1/2 in. Insulated High-Leverage Cable Cutter
• Insulated Reflex™ Super T®-Stripper
Wire Stripper
• Insulated Electrician’s Skinning Knife
• Volt-Sensor® NCV Tester
• 7-1/2 in. Non-Conductive Fuse Puller
• Heavy-Duty Soft Tool Case
10-Piece Basic Kit - #35-9300
Kit Includes:
• Three insulated pliers (9-1/4 in. Linesman w/crimper, 8 in.
Offset diagonal, 8-1/2 in. Long Nose)
• Three insulated screwdrivers ( 3/16 x 5 in. slotted, 1/4 x 6 in.,
#2 x 4 in. Phillips, #3 x 6 in. Phillips)
• 9-1/2 in. Insulated High-Leverage Cable Cutter
• Insulated Reflex™ Super T®-Stripper
Wire Stripper
• 7-1/2 in. Non-Conductive Fuse Puller
• Heavy-Duty Soft Tool Case
1-800-435-0705 for Customer Service
www.idealindustries.com
C-43
Insulated Hand Tools
• Eight insulated screwdrivers ( 1/8 x 3 in. slotted, 3/16 x 5 in. slotted,
1/4 x 6 in. slotted, 5/16 x 6 in. slotted, 3/8 x 8 in. slotted, #1 x 3 Phillips,
#2 x 4 in. Phillips, #3 x 6 in. Phillips)
Insulated Pliers
Insulated Hand Tools
A
H
B
G
C
Fig.
A
D
F
E
Description
Cat. No.
Fig.
Description
Cat. No.
Premium T®-Stripper Wire Stripper
45-9120
E
10 in. Tongue and Groove Pliers
35-9430
9-3/4 in. Multi-Crimp Tool
30-9429
B
8 in. Diagonal Cutting Pliers w/angled head
35-9029
F
C
9-1/2 in. High-Leverage Cable Cutter
35-9052
G
8-1/2 in. Long-Nose Pliers
35-9038
D
9-1/4 in. Side Cutting Linesman Pliers
30-9430
H
Reflex™ Super T®-Stripper Wire Stripper
45-9615
Insulated Screwdrivers
Description
#1 Phillips Screwdriver
Insulated Nutdrivers
Shaft Length
Cat. No.
Description
Shaft Length
Cat. No.
3 in.
35-9310
3/16 in. Hex Nutdriver
5 in.
35-9330
5 in.
35-9331
#2 Phillips Screwdriver
4 in.
35-9311
1/4 in. Hex Nutdriver
#3 Phillips Screwdriver
6 in.
35-9312
5/16 in. Hex Nutdriver
5 in.
35-9332
1/8 in. Slotted Screwdriver
4 in.
35-9320
3/8 in. Hex Nutdriver
5 in.
35-9333
3/16 in. Slotted Screwdriver
5 in.
35-9321
7/16 in. Hex Nutdriver
5 in.
35-9334
7/32 in. Slotted Screwdriver
7 in.
35-9322
1/2 in. Hex Nutdriver
5 in.
35-9335
1/4 in. Slotted Screwdriver
6 in.
35-9323
9/16 in. Hex Nutdriver
5 in.
35-9336
5/16 in. Slotted Screwdriver
7 in.
35-9324
3/8 in. Slotted Screwdriver
8 in.
35-9325
Screwdriver Kit
Cat. No.
9-Piece Insulated Screwdriver Kit with hard case
(Includes all 9 screwdrivers listed above.)
35-9303
Nutdriver Kit
Cat. No.
7-Piece Insulated Nutdriver Kit with hard case
(Includes all 7 Nutdrivers listed above.)
35-9304
Cases
Insulated Knife
Description
Cat. No.
Soft Zipper Case for Basic Kit (35-9300)
35-9350
Soft Zipper Case for Standard Kit (35-9301)
35-9351
Description
Cat. No.
Soft Zipper Case for Journeyman Kit (35-9302)
35-9352
Insulated Electrician’s Skinning Knife
35-9340
Hard Case for Screwdriver Kit (35-9303) & Nutdriver Kit (35-9304)
35-9353
C-44
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Fuse Pullers
Fuse Puller and Test Light
■ No-slip gripping
surface and
protective
finger stops
for added
safety
■ Convenient pocket-sized tool safely
pulls cartridge fuses and checks
electrical connections
Description
Cat. No.
■ Test prods fit parallel and tandem slot
receptacles
Small Puller for 0 to 30A/250V, 1/4 in. to 1/2 in. dia. fuses;
5 in. long
34-015
■ Built-in resistors limit current flow to eliminate false indication
Large Puller for 0 to 100A/250V & O to 60A/600V, 9/16 in. to
1 in. dia. fuses; 7-1/4 in. long
34-016
■ For 9/16 in. to 1 in. fuses
■ For use on fuses to 100A/250V and 60A/600V
5-in-1 Non-Conductive
Screwdriver/Nutdriver
■ Test capacity from 100V to 600V AC/DC
Description
Cat. No.
Fuse Puller & Test Light only
34-012
Safe-T-Grip® Fuse Pullers
■ 1000V AC, 1500V DC rated per ASTM F 1505-01 and
EN 60900 (IEC900)
■ Contains: 1/4 in. slotted, 3/16 in. slotted, #1 Phillips, #2 Phillips
and 1/4 in. nutdriver
■ Accommodates most standard 1/4 in. hex bits
■ Powerful magnet securely holds bits in place
■ Handle will store up to 8 standard bits
■ Strong 6 in. non-conductive composite material shank
■ Maximum efficiency and convenience for removing or
replacing cartridge-type fuses
■ Three sizes handle fuses ranging from 0 to 600A
Description
Cat. No.
■ Fully insulated, high-dielectric, glass-filled
polypropylene construction
5-in-1 Non-Conductive Screwdriver/Nutdriver
35-9905
1/4 in. Slotted Replacement Bit
LA-4125
■ Notched handles provide safe, no-slip grip
3/16 in. Slotted Replacement Bit
LA-4126
■ Clearly marked amperage ranges
#1 Phillips Replacement Bit
LA-4127
■ Exceed MIL specifications
#2 Phillips Replacement Bit
LA-4128
Description
Cat. No.
Small Puller for 250V, 9/32 in. to 1/2 in. dia. fuses; 5 in. long
34-001
Medium Puller for 0 to 100A/250V & 600V, 1/2 in. to 1 in. dia.
fuses; 7-1/2 in. long
34-002
Large Puller for 31 to 600A/250V & 31 to 400A/600V, 3/4 in. to
2-1/2 in. dia. fuses; 11-3/4 in. long
34-003
1000V Insulated Screw-Holding
Screwdriver
■ Split blade wedges into
screw slot
when collar
is extended
■ Holds screw in place when installing in hard to reach areas
■ Easy to start screw when wearing gloves
1-800-435-0705 for Customer Service
Description
Cat. No.
1000V Insulated Screw Holding Screwdriver, 3/16 x 6 in. slotted Tip
35-9406
www.idealindustries.com
C-45
Insulated Hand Tools
■ Molded of tough,
high-impact nylon
for greater strength
Cutting & Holemaking Tools
IDEAL cutting tools offer a powerful line-up that
includes. . .
■ A new line of IRONMAN™ Bi-Metal Hole Saws. Superior bi-metal
construction, a thicker flex-free backing plate and variable pitch teeth
combine to provide superior cutting performance and longevity.
■ New Nailbiter™ and RESI-MASTER™ Ship Augers that outperform
and outlast any other augers on the market today.
■ Superior step drill bits that deliver! Dual fluted, titanium nitride
coated bits with the NEW split-point self starting
feature, deliver faster cuts, improved
performance and longer tool life than
conventional bits.
■ Bi-metal reciprocating blades for
the toughest applications.
Engineered bi-metal blades
last up to ten times longer
than standard carbon
steel blades.
■ A broad line of flexible drill
bits and specialty wood
bits that deliver superior
performance at any
job site.
■ An expanded range of
hacksaws and allpurpose hand saws and
blades.
C-46
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Introducing the “New Improved” line of IRONMAN™ Bi-metal hole
saws from IDEAL INDUSTRIES, INC. With re-engineered bi-metal
construction, a thick “flex-free” backing plate, and variable sized teeth,
IDEAL IRONMAN™ hole saws will rival the cutting speed and longevity
of any in the industry. The bi-metal construction cuts metal, wood and
plastics including: tool and stainless steel, nail embedded wood,
plywood, and pipe. An extensive list of 52 sizes, effective accessories,
and kits are available to meet all your cutting needs. When it comes to
quality, performance and durability, IDEAL is the professional’s choice
for hole saws.
New improved solid plate
design resists flexing of
the new hole saw for clean
true holes and added
durability
Bi-metal construction combines hardened and durable
tool steel teeth welded to
fatigue resistant body for
long and consistent cutting
life
Variable sized teeth clear
chips away from the work
quickly for faster cuts and
reduced vibration
1-5/8 in. cutting depth cuts through
2’ x 4’s on the first cut
Threads fit all
standard arbors
Hole Saws
■ Thicker, FLEX FREE
backing plate for clean
true holes and longer
tool life
■ Improved bi-metal construction
for long life and durability
■ Variable pitch tooth geometry for fast cutting and reduced
vibration
■ Cuts all types of machinable metal including stainless steel,
wood, nail embedded wood, plastic and fiberboard
Cat. No.
35-340
35-341
35-342
35-343
35-344
35-345
35-346
35-347
35-348
35-349
35-350
35-351
35-352
35-353
35-354
35-355
35-356
35-357
35-358
35-359
35-360
35-361
35-362
35-363
35-364
35-365
35-366
35-367
35-368
35-369
35-370
35-371
35-372
35-373
35-374
35-375
35-376
35-377
35-378
35-379
35-380
35-381
35-382
35-383
35-384
35-385
35-386
35-387
35-388
35-389
35-390
*All pipe sizes listed in the Pipe Tap Size and Pipe Entrance Size columns are standard industry sizes. All
pipes are sized by the nominal inside diameter.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-47
Hole Saws
Bi-Metal Hole Saws
Pipe Tap
Pipe Entrance
Saw Diameter
Size*
Size*
(Inches)
(Inches)
(Inches)
Use Arbor No. 35-391, 35-392 or 35-393
9⁄16
–
–
5⁄89
–
–
11⁄16
–
–
3⁄49
1⁄2
3⁄8
13⁄169
–
–
7⁄8
3⁄4
1⁄2
15⁄169
–
–
19
–
–
1-1⁄16
–
–
1-1⁄89
1
3⁄4
1-3⁄16
–
–
Use Arbor No. 35-394,35-536 or 35-537
1-1⁄4
–
–
1-5⁄16
–
–
1-3/8
–
1
1-7⁄16
–
–
1-1⁄2
1-1⁄4
–
1-9⁄16
–
–
1-5⁄8
–
–
1-11⁄19
–
–
1-3⁄4
1-1⁄2
1-1⁄4
1-13⁄16
–
–
1-7⁄8
–
–
2
–
1-1⁄2
2-1⁄16
–
–
2-1⁄8
–
–
2-1⁄4
2
–
2-5⁄16
–
–
2-3⁄8
–
–
2-1⁄2
–
2
2-9⁄16
–
–
2-5⁄8
2-1⁄2
–
2-3⁄4
–
–
2-7⁄8
–
–
Use Arbor No. 35-394, 35-536, 35-537 or 35-538
3
–
2-1⁄2
3-1⁄8
–
–
3-1⁄4
3
–
3-3⁄8
–
–
3-1⁄2
–
–
3-5⁄8
–
3
3-3⁄4
3-1⁄2
–
3-7⁄8
–
–
4
–
–
4-1⁄8
–
3-1⁄2
4-1⁄4
4
–
4-3⁄8
–
–
4-1⁄2
–
4
4-3⁄4
4-1⁄2
–
5
–
–
5-1⁄2
–
–
5-3⁄4
–
–
6
–
–
N
SizEeW
s
Hole Saw Arbors
Hole Saw Kits
Electrician’s
Hole Saw Kit
35-391 35-392 35-393
35-394
35-536
35-537
35-538
Hole Saws
Durable steel construction means years of long-lasting performance.
Set-screw in body allows easy replacement of the pilot drill. Save
valuable time through this versatile design. Instantly change hole saws
without tools and without having to remove the arbor from the chuck.
Shank Size
Thread
Size
Chuck
Size
Fits Hole
Saw Sizes
Cat. No.
1/4 in. Round
1/2-20 in.
1/4 in.
9/16 - 1-3/16 in.
35-391
3/8 in. Hex
1/2-20 in.
3/8 in.
9/16 - 1-3/16 in.
35-392
7/16 in. Hex
1/2-20 in.
1/2 in.
9/16 - 1-3/16 in.
35-393
7/16 in. Hex
5/8-18 in.
1/2 in.
1-1/4 - 6 in.
35-394
7/16 in. Hex
5/8-18 in.
1/2 in.
1-1/4 - 6 in.
35-536
3/8 in. Hex
5/8-18 in.
3/8 in.
1-1/4 - 6 in.
35-537
7/16 in. Hex
5/8-18 in.
1/2 in.
2 - 6 in.
35-538
Replacement Pilot Drills for Hole Saw
Arbors
Split point pilot drills start
on contact for faster
penetration and less
35-397
walking.
■ Reliable 8-piece kit in a
durable plastic case
■ Find electrical sizes for
pipe and conduit through 2 in.
Kit 35-400 Includes:
Description
Cat. No.
Hole Saw sizes 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in.
& 2-1/2 in. Also includes arbor models 35-393 & 35-394
35-400
14-Piece Electrician’s
Hole Saw Kit
■ Generous 14-piece kit offers a
tremendous selection
■ You’ll find electrical sizes for
pipe and conduit through 4 in.
■ Sturdy plastic case survives
extra wear and tear
Kit 35-401 Includes:
35-398
Description
Cat. No.
4-1/2 in. x 1/4 in. – Fits 35-391, 35-393, 35-394 & 35-538 arbors
35-397
3-1/4 in. x 1/4 in. – Fits 35-392, 35-536 & 35-537 arbors
35-398
Arbor Extension
Description
Cat. No.
Hole Saw sizes 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in.,
2-1/2 in., 3 in., 3-5/8 in., 4-1/8 in., 4-1/2 in. Also includes arbor
models 35-391, 35-393 & 35-394 and extension bar 35-396.
35-401
19-Piece Master Electrician’s
Hole Saw Kit
■ For electrical, industrial
and all-purpose
maintenance needs
For boring jobs that require a longer
reach, arbor extensions add up to
18 in. length and can be
easily connected to IDEAL
hole saw arbors.
■ 19-piece kit comes in sturdy
durable plastic case
Description
Cat. No.
Extension for 7/16 in. Arbors, 12 in. long
35-396
■ Plumbing and electrical
sizes for pipe and conduit
through 4 in.
Kit 35-518 Includes:
C-48
www.idealindustries.com
Description
Cat. No.
Hole Saw sizes 3/4 in., 7/8 in., 1 in., 1-1/8 in., 1-3/8 in., 1-1/2 in.,
1-3/4 in., 2 in., 2-1/4 in., 2-1/2 in., 3 in., 3-5/8 in., 4-1/8 in.
& 4-1/2 in. Also includes arbor models 35-393, 35-394, pilot drill
35-397 (two pieces) and extension bar 35-396.
35-518
1-800-435-0705 for Customer Service
Tools and Totes
Tungsten Carbide Grit Hole Saws
Adjustable Can Light Hole Saws
■ Superior resistance to heat, wear and
abrasion
■ Cuts drywall and ceiling tile
■ Self-sharpening carbide
coated cutting blades
■ Unique snag resistant tooth/gullet design
results in superior cutting performance
■ Includes 2 dust shields to
minimize clean up
■ The choice for abrasive or thin material
including cast iron, drywall, plaster,
stucco, ceramics, fiberglass,
hardwood and composites
Diameter
Pipe Tap
Pipe Entrance
Cat. No.
Use Arbor No. 35-391, 35-392 or 35-393
Drill not included.
Description
Cat. No.
3/4 in.
1/2 in.
3/8 in.
35-343CG
Adjustable Can Light Hole Saw – 10 sizes from 2-1/2 in. to 7 in.
35-598
7/8 in.
3/4 in.
1/2 in.
35-345CG
Adjustable Can Light Hole Saw – 13 sizes from 6-1/4 in. to 10-3/8 in.
35-599
1 in.
3/4 in.
35-349CG
1-1/8 in.
Use Arbor No. 35-394, 35-536 or 35-537
1-3/8 in.
–
1 in.
35-353CG
1-1/2 in.
1-1/4 in.
–
35-355CG
1-3/4 in.
Recessed Lighting Hole Saws
■ Durable tungsten carbide
grit cutting edge
1-1/2 in.
1-1/4 in.
35-359CG
2 in.
–
1-1/2 in.
35-362CG
2-1/8 in.
–
–
35-364CG
2-1/4 in.
2 in.
–
35-365CG
2-1/2 in.
–
2 in.
35-368CG
■ Cut abrasive materials
such as ceiling tile, lath
and plaster
2-5/8 in.
2-1/2 in.
–
35-370CG
■ Use with arbor 35-394
–
2-1/2 in.
35-373CG
3 in.
–
35-375CG
3 in.
3-1/4 in.
3-5/8 in.
–
1-800-435-0705 for Customer Service
3 in.
35-378CG
■ Quick and easy installation
of recessed lighting
Diameter
For Fixtures
Cat. No.
4-3/8 in.
Capri®, Marco & Halo®, Mini-Juno®
6-3/8 in.
Capri®, Halo®, Pathway & Thomas
35-601CG
6-5/8 in.
Juno®, Progress & Pathway
35-602CG
6-7/8 in.
Capri®, Hubbell, Lightolier, Lithonia®,
Prescolite, Progress
35-603CG
www.idealindustries.com
35-384CG
C-49
Hole Saws
■ 1-1/2 in. cutting depth
Reciprocating Blades
■ Bi-metal blades last up to 10 times longer than carbon steel
blades
■ Flexible spring-back provides long blade life
■ Super-hard, high speed steel teeth for a sharp,
long-lasting cutting edge
■ Shatterproof for tough applications
Reciprocating Blades
■ Fits all reciprocating saws using 1/2 inch universal shank
L/W/TH
(Inches)
TPI
Material
Blade
Bock
Qty.
Application
Cat. No.
6 x 3/4 x .035
14
Bi-metal
Straight
5
Pipe, structural steel, stainless steel:
3/32” - 1/4”, Non-ferrous metal: 3/32” - 3/8”
36-059
6 x 3/4 x .035
14
Bi-metal
Straight
25
Pipe, structural steel, stainless steel:
3/32” - 1/4”, Non-ferrous metal: 3/32” - 3/8”
36-059B
4 x 3/4 x .035
18
Bi-metal
Straight
5
Structural steel, pipe, conduit, stainless steel:
1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5//!6” thick
36-055
6 x 3/4 x .035
18
Bi-metal
Straight
5
Structural steel, pipe, conduit, stainless steel:
1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5/16” thick
36-057
Metal Cutting
6 x 3/4 x .035
18
Bi-metal
Straight
25
Structural steel, pipe conduit, stainless steel:
1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5/16” thick 36-057B
6 x 3/4 x .035
18
Bi-metal
Straight
5
Structural steel, pipe, conduit, stainless steel:
1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5/16” thick
36-060
6 x 3/4 x .035
24
Bi-metal
Straight
5
All metal less than 1/8” thick: Tubing conduit, trim
36-058
6 x 3/4 x .035
24
Bi-metal
Straight
25
All metal less than 1/8” thick: Tubing conduit, trim
36-058B
6 x 3/4 x .050
18
Bi-metal
Straight
2
Heavy-duty blade for cutting structural steel, pipe,
conduit, stainless steel: 1/16” to 3/16” thick
36-085
8 x 3/4 x .050 10/14 Bi-metal
Straight
2
Heavy-duty blade for cutting structural steel, pipe,
conduit, stainless steel: 1/8” to 1/2” thick
36-086
12 x 3/4 x .050 10/14 Bi-metal
Taper
5
Heavy-duty blade for cutting structural steel, pipe,
conduit, stainless steel: 1/8” to 1/2” thick
36-087
6 x 3/4 x .050
6
Bi-metal
Taper
5
Fast cutting, roughing-in work, nail- embedded wood,
remodeling
36-065
6 x 3/4 x .050
6
Bi-metal
Taper
25
Fast cutting, roughing-in work, nail-embedded wood,
remodeling
36-065B
9 x 3/4 x .050
6
Bi-metal
Taper
5
Fast cutting, roughing-in work, nail-embedded wood,
remodeling
36-066
12 x 3/4 x .050
6
Bi-metal
Taper
5
Fast cutting, roughing-in work, nail-embedded wood,
remodeling
36-067
9 x 7/8 x .062
6
Bi-metal
Taper
2
Demolition work in nail-embedded wood, remodeling
36-095
9 x 7/8 x .062
10
Bi-metal
Taper
2
Demolition work in wood, metal, pipe and fire and rescue
36-096
6 x 3/4 x .035
10
Bi-metal
Straight
5
Nail embedded wood, metal and non-ferrous metal
composition materials & plastics 1/8” - 1/2”
36-075
8 x 3/4 x .050
Grit
Tung. Grit
Straight
2
Iron pipe, fiberglass, reinforced plastics, ceramic tile,
stone, slate and brick.
36-090
3 x 5/16 x .035 18
Bi-Metal
Scroll
5
Scroll cutting wood, cast aluminum and non-ferrous metals
36-054
6 x 3/4 x .050
Bi-metal
Taper
2
For plaster, drywall, plaster board & lath.
Bi-directional cutting
36-088
Heavy-Duty Metal Cutting
Wood w/Nails
Demolition
General Purpose
Specialty Cutting
Plaster/Drywall
C-50
www.idealindustries.com
6
1-800-435-0705 for Customer Service
Tools and Totes
Long-Life Metal Cutting Reciprocating Blades
N EW
■ Engineered to be the longest lasting metal cutting blades available
■ Long-life blades perform up to three times as many cuts as similar metal cutting blades
■ 8% cobalt cutting edge for extreme durability
■ Longer life for greater value
L/W/TH
(Inches)
Long-Life Blades
TPI
Application
18
Bi-metal
Straight
5
8 x 3/4 x .035
18
Bi-metal
Straight
5
Long-Life blade for cutting structural steel, pipe, conduit, stainless steel, sheet metal: 1/16” - 3/16” thick
36-044
6 x 1 x .042
14
Bi-metal
Straight
5
Long-life blade for cutting rebar, barstock, angle iron
and other heavy gauge metals: 1/8” and thicker
36-046
12 x 1 x .050
14
Bi-metal
Straight
5
Long-life blade for cutting rebar, barstock, angle iron
and other heavy gauge metals: 1/8” and thicker
36-048
10.0
Material: SAE 1020 Tubed Steel
(Round) 1 OD × .065 Wall
All blades tested are 6 blades
36-043
Cutting Speed
9.0
60
Cat. No.
6 x 3/4 x .035
70
Number of Cuts
Qty.
Long-Life blade for cutting structural steel, pipe, conduit, stainless steel, sheet metal: 1/16” - 3/16” thick
Durability
80
Blade
Bock
Material
Average Speed of Cuts
(In Seconds)
8.0
7.0
50
6.0
40
5.0
30
4.0
3.0
20
2.0
10
0
1.0
ID
(.0 EA
42 L
)
ID
(.0 EA
35 L
)
St
a
(.0 rre
35 tt
)
Le
(.0 no
35 x
)
M
M
Gr
Bo
ilw
ilw
ee
s
(.0 auk (.0 auk
(.0 ch/
(. nf
V
35 ee 42 ee
35 A 035 ield
)
)
)
)
Progressive Tooth Reciprocating Blades
■ Specially designed for all purpose cutting
0.0
ID
(.0 EA
35 L
)
Bo
(.0 sc
35 h
)
St
a
(.0 rre
35 tt
)
Le
(.0 no
35 x
)
ID
(.0 EA
42 L
)
M
M
Gr
ilw
ilw
e
Bl enf
(.0 auk (.0 auk
u
(.0 Mo ield 35) ee 42) ee
35 l
)
N EW
■ Cut multiple materials without changing blades
■ Tough bi-metal and HCS construction for long life.
L/W/TH
(Inches)
Long-Life Blades
Material
Blade
Bock
Qty.
Application
Cat. No.
All metal, non-ferrous metal, sheet metal,
pipe, and other metal materials
36-056
6 x 3/4 x .035
Progressive
Bi-metal
5
8 x 3/4 x .050
Progressive
HCS
5
All wood and composite materials
36-052
5
For wood, nail-embedded wood, non-ferrous
metals, plastic and fiberglass
36-076
8 x 3/4 x .050
Progressive
Bi-metal
Portable Band Saw Blades
■ Bi-metal construction
■ For pipe, tubing and solids
■ Fit all standard portable band saw machines
■ Cut any machinable metal, including conduit, angle iron, structurals,
rebar and stainless steel tubing
L/W/THK (Inches)
TPI
Qty./Pack
Cat. No.
44-7/8 x 1/2 x .020
10
3
36-070
44-7/8 x 1/2 x .020
14
3
36-071
44-7/8 x 1/2 x .020
18
3
36-072
44-7/8 x 1/2 x .020
24
3
36-073
1-800-435-0705 for Customer Service
www.idealindustries.com
C-51
Recip./Band Saw Blades
■ Shatterproof bi-metal design
N EW
Nailbiter™ Ship Auger Bits
Mini™ Augers
■ Dual-Helix construction with twin cutting
edges provides faster and smoother drilling
action, even through nail-embedded timbers
■ Designed to fit between wall
studs when used with
common drills
■ Full body, dual induction heat treatment
ensures durability, minimizes warping and
delivers long lasting performance
■ Eliminates the need for
expensive right angle drills
■ Heavy-duty lead screw designed for quick
gripping power, superior penetration
and extra-long life
■ Re-sharpenable for extended tool life
N EW
Augers
Power Ship Augers - Bit Length = 7-1/2”,
Twist = 5”, Shank = 7/16”
Hole
Overall Twist
Description
Diameter Length Length
5/8 in. Power Ship Auger
11/16 in. Power Ship Auger
3/4 in. Power Ship Auger
13/16 in. Power Ship Auger
7/8 in. Power Ship Auger
1 in. Power Ship Auger
5/8 in.
Cat.
No.
7-1/2 in.
5 in.
35-810
11/16 in. 7-1/2 in.
5 in.
35-811
7-1/2 in.
5 in.
35-812
13/16 in. 7-1/2 in.
5 in.
35-813
3/4 in.
7/8 in.
7-1/2 in.
5 in.
35-814
1 in.
7-1/2 in.
5 in.
35-815
1-1/8 in. Power Ship Auger
1-1/8 in. 7-1/2 in.
5 in.
35-816
1-1/4 in. Power Ship Auger
1-1/4 in. 7-1/2 in.
5 in.
35-817
Power Ship Augers - Bit Length = 18”,
Twist = 15”, Shank = 7/16”
Description
Hole
Overall Twist
Diameter Length Length
Cat.
No.
Mini™ Augers - Bit Length = 4-3/4”
Twist = 2-1/2”, Shank = 7/16”
Hole
Description
Diameter
Overall
Length
Twist
Length
5/8 Mini™ Auger
5/8 in.
4-3/4 in.
2-1/2 in. 35-862
3/4 Mini™ Auger
3/4 in.
4-3/4 in.
2-1/2 in. 35-864
7/8 Mini™ Auger
7/8 in.
4-3/4 in.
2-1/2 in. 35-866
1 in.
4-3/4 in.
2-1/2 in. 35-868
1 Mini™ Auger
RESI-MASTER™ Heavy-Duty Ship Augers
■ 62° cutting angle
reinforces the
cutting edge and
provides greater
durability
N EW
■ Hardened lead screw and cutting edge provide increased
wear resistance and extended life
■ Secondary relief angle evacuates wood chips quickly and
prevents auger from jamming
■ Oversized cutting head makes hole larger than body of bit for
easy ejection from work piece
1/2 in. Power Ship Auger
1/2 in.
18 in.
15 in. 35-820
5/8 in. Power Ship Auger
5/8 in.
18 in.
15 in. 35-821
11/16 in.
18 in.
15 in. 35-822
Power Ship Augers - Bit Length = 7-1/2”,
Twist = 5”, Shank = 7/16”
Hole
Overall Twist
Description
Diameter Length Length
11/16 in. Power Ship Auger
3/4 in. Power Ship Auger
Cat.
No.
Cat.
No.
3/4 in.
18 in.
15 in. 35-823
5/8 in. RESI-MASTER™ Auger
1/2 in.
7-1/2 in.
5 in.
35-892
13/16 in.
18 in.
15 in. 35-824
3/4 in. RESI-MASTER™ Auger
3/4 in.
7-1/2 in.
5 in.
35-893
7/8 in.
18 in.
15 in. 35-825
15/16 in. RESI-MASTER™Auger
15/16 in.
18 in.
15 in. 35-826
7/8 in. RESI-MASTER™ Auger
1 in.
18 in.
15 in. 35-827
1 in. RESI-MASTER™ Auger
1-1/8 in. Power Ship Auger
1-1/8 in.
18 in.
15 in. 35-828
1-1/8 in. RESI-MASTER™ Auger
1-1/4 in. Power Ship Auger
1-1/4 in.
18 in.
15 in. 35-829
Power Ship Augers - Bit Length = 18”,
Twist = 15”, Shank = 7/16”
Description
13/16 in. Power Ship Auger
7/8 in. Power Ship Auger
15/16 in. Power Ship Auger
1 in. Power Ship Auger
Auger Bit Extensions
15/16 in.
7-1/2 in.
5 in.
35-896
7/8 in.
7-1/2 in.
5 in.
35-897
1 in.
7-1/2 in.
5 in.
35-898
1-1/8 in.
7-1/2 in.
5 in.
35-899
Hole
Overall Twist
Diameter Length Length
Cat.
No.
5/8 in. RESI-MASTER™ Auger
5/8 in.
18 in.
15 in. 35-971
*Dual locking scews
3/4 in. RESI-MASTER™ Auger
3/4 in.
18 in.
15 in. 35-972
Auger Bit Extensions, 18 in.
Six flats to fit drill chuck – Allen wrench included
Description
15/16 in. RESI-MASTER™ Auger
Cat. No.
Auger Bit Extension – 5/16 in.
35-818
Auger Bit Extension – 7/16 in.
35-819
7/8 in. RESI-MASTER™ Auger
1 in. RESI-MASTER™ Auger
1-1/8 in. RESI-MASTER™ Auger
15/16 in.
18 in.
15 in. 35-977
7/8 in.
18 in.
15 in. 35-976
1 in.
18 in.
15 in. 35-978
1-1/8 in.
18 in.
15 in. 35-979
Installer Bits
■ Hole in fluted head
for pulling wires through walls, ceiling and floors
■ Flutes designed for quick chip removal — no clogging or binding
■ Premium quality, extra-hard 52-100 carbon bearing steel
Description
C-52
www.idealindustries.com
Length
Cat. No.
Installer Bit – 1/4 in.
18 in.
35-870
Installer Bit – 3/8 in.
18 in.
35-871
Installer Bit – 1/2 in.
18 in.
35-872
1-800-435-0705 for Customer Service
Tools and Totes
Titanium-Coated Step Drill Bits
Protective titanium
nitrite coating
Bit Diameters
Sizes (Inches)
Improved Split-Point
design for 3x faster
starts
Double-fluted
design
Step
Step
No. of
Increments Thickness Shank Dia.
Hole Sizes (Inches)
(Inches)
(Inches)
Cat.
No.
1/8 to 1/2
13
1/32
1/8
1/4
35-511
1/4 to 3/4
9
1/16
1/8
3/8
35-512
1/4 to 7/8
11
1/16
1/16
3/8
35-513
1/2 to 1
8
1/16
1/8
3/8
35-514
1/4 to 1-1/8
16
1/16
1/16
3/8
35-515
3/16 to 1/2
6
1/16
3/8
1/4
35-516
1/4 to 1-3/8
10
1/32
1/16 to 1/4
3/8
35-517
Radius-blended,
multi-diameter steps
35-511
35-512
35-513
35-515
35-516
35-514
35-517
Electrician’s Step
Bit Kit
■ Durable blow-molded case
securely holds and protects
bits
■ Kit includes four step bits
(35-511, 35-513, 35-515
and 35-517)
■ Kit provides a solution for
every electrical hole size
between 1/8 in. and 1-3/8 in.
N EW
Description
Cat. No.
Electrician’s Step Bit Kit
35-520
1-800-435-0705 for Customer Service
www.idealindustries.com
C-53
Drill Bits
Trust IDEAL step drill bits for precise, repetitive drilling through the
toughest materials including brass, carbon steel, cast iron, stainless
steel, and more. These tough and reliable tools are constructed with
a rugged titanium nitrite exterior coating. Each step is gradually
blended to ease stepping through hole sizes; reducing the need to
keep changing drill bits, which speeds up the fabrication process.
Improved Split-Point tip design eliminates the need for a starter hole
or punch and delivers three times faster starts, saving valuable time.
The double-fluted design provides balanced cuts and cooler
operation.
Flexible Drill Bits
Premium heat-treated spring steel
Flexible Drill Bits
Extra durable
braze where
shank meets tip
Fish holes in tip and shank
for easy wire pulling
Professional drill bits drill and fish wire in one easy step. Drill and pull wire through blind areas in ceilings, walls and
floors. Shanks are made from premium heat-treated spring steel for maximum flexibility while practically eliminating any
retained shank bend. A three-flat non-slip grip on the shank and fish holes in both the tip and shank insure trouble-free
wire pulling in either direction. Our tip design provides superior tip/shank contact, increasing the strength and durability of
the braze and preventing separation when striking nails or other obstructions. Multiple styles are available for a variety
of applications.
Screw Point
Flexible Bits, Type B
Serrated Combination
Flexible Bits, Type C
■ Fast and aggressive,
self-starting bit
■ Multi-purpose versatile bit for
clean holes
■ Ultra-sharp ground threads
provide increased pulling power
through obstructions
■ Designed for easy to medium
wood drilling and light metal
■ Designed for easy to tough
wood drilling
Description
3/8 in. x 24 in. Screw Point Flexible Bit
3/8 in. x 36 in. Screw Point Flexible Bit
3/8 in. x 54 in. Screw Point Flexible Bit
3/8 in. x 72 in. Screw Point Flexible Bit
1/2 in. x 36 in. Screw Point Flexible Bit
1/2 in. x 54 in. Screw Point Flexible Bit
1/2 in. x 72 in. Screw Point Flexible Bit
9/16 in. x 36 in. Screw Point Flexible Bit
9/16 in. x 54 in. Screw Point Flexible Bit
9/16 in. x 72 in. Screw Point Flexible Bit
3/4 in. x 36 in. Screw Point Flexible Bit
3/4 in. x 54 in. Screw Point Flexible Bit
3/4 in. x 72 in. Screw Point Flexible Bit
C-54
www.idealindustries.com
Best for
WOOD
Shank
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
Cat. No.
90-080
90-081
90-082
90-083
90-084
90-085
90-086
90-087
90-088
90-089
90-090
90-091
90-092
Best for
light WOOD
& light METAL
■ Pressure is needed for starting
and pulling the bit through
the wood
Description
Shank
Cat. No.
1/4 in. x 24 in. Serrated Combination Flexible Bit
3/16
90-061
1/4 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-063
3/8 in. x 24 in. Serrated Combination Flexible Bit
3/16
90-065
3/8 in. x 36 in. Serrated Combination Flexible Bit
3/16
90-066
3/8 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-067
3/8 in. x 72 in. Serrated Combination Flexible Bit
3/16
90-068
1/2 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-070
9/16 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-073
1-800-435-0705 for Customer Service
Tools and Totes
High-Speed Steel
Flexible Bits, Type HS
Flexible Bit Extensions
■ Three lengths available for 3/16 in.
and 1/4 in. shaft diameters
Best for
METAL
■ The best when encountering nailembedded wood, steel studs and steel plates
■ Connect to chuck end of shaft to
increase the length of the bit
Shank
Cat. No.
Shank
Cat. No.
Description
3/16 in. x 36 in. Flexible Bit Extension
3/16
90-170
3/8 in. x 24 in. High-speed Steel Flexible Bit
3/16
90-154
3/16 in. x 54 in. Flexible Bit Extension
3/16
90-171
3/8 in. x 36 in. High-speed Steel Flexible Bit
3/16
90-155
1/4 in. x 36 in. Flexible Bit Extension
1/4
90-173
3/8 in. x 54 in. High-speed Steel Flexible Bit
3/16
90-156
1/4 in. x 54 in. Flexible Bit Extension
1/4
90-174
3/8 in. x 72 in. High-speed Steel Flexible Bit
3/16
90-157
1/2 in. x 24 in. High-speed Steel Flexible Bit
1/4
90-158
1/2 in. x 36 in. High-speed Steel Flexible Bit
1/4
90-159
1/2 in. x 54 in. High-speed Steel Flexible Bit
1/4
90-160
1/2 in. x 72 in. High-speed Steel Flexible Bit
1/4
90-161
Description
Flexible Bit
Placement Tool
■ Use as a positioning guide
for the flexible drill bits
■ Aids in more accurate placement of bit tips within walls
Masonry Flexible Bits,
Type M
■ Masonry drill bit
■ Increases directional control during drilling
Best for
MASONRY
Description
Cat. No.
Flexible Bit Placement Tool
90-176
■ Designed for drilling in
lightweight masonry materials
Description
Shank
Cat. No.
3/8 in. x 54 in. Masonry Flexible Bit
3/16
90-124
1/2 in. x 72 in. Masonry Flexible Bit
1/4
90-128
1-800-435-0705 for Customer Service
www.idealindustries.com
C-55
Flexible Drill Bits
■ Heavy duty split point
high-speed steel drill bit
Jab Saw
Heavy-Duty Hacksaw
■ Cushioned ergonomic
grip for performance and
comfort
■ Rugged frame provides
lightweight rigidity and
exceptional control
■ Includes replaceable bi-metal wallboard
blade
■ Stores up to nine extra blades
Hand Tools/Saws
■ Holds all reciprocating blades and hacksaw blades
■ Blades can be adjusted to
55° angle for flush cutting and
tensioned to 30,000 psi
■ Ergonomic grip
■ Includes 12 in. x 24T bi-metal blade
Description
Cat. No.
Jab Saw
35-275
Replacement blade
36-088
Description
Cat. No.
Heavy-Duty Hacksaw
35-260
Ergonomic Hacksaw
■ Angled handle for easier cutting
Folding Saw
■ Blade can easily be adjusted
for flush cutting
■ Light-weight, heavy-duty
die cast construction
■ Easy tensioning wing-nut
keeps blades tight for straighter cuts
■ Ergonomic rubber comfort grip
■ Cushioned ergonomic grip for performance and comfort
■ Blade safely and conveniently folds down in handle
■ Includes 12 in. x 24T bi-metal blade
■ Accepts all standard 6” recip blades
Description
Cat. No.
Folding Saw
35-274
Description
Cat. No.
Ergonomic Hacksaw
35-261
Mini Hacksaw
Aviation Tin Snips
■ Heavy-duty die cast
frame
■ Chrome-molybdenum steel
forged blades for greater
strength and durability
■ Non-slip rubber comfort grip
■ Accepts all standard hacksaw blades
■ Serrated edges provide
a stable hold when cutting
■ Labor-saving design for
easier cutting
■ Comfortable non-slip
dual durometer grips
Description
Cat. No.
Mini Hacksaw
35-259
Hacksaw Blades
Description
Cat. No.
Straight Cut Aviation Tin Snips
35-001
Right Cut Aviation Tin Snips
35-002
Left Cut Aviation Tin Snips
35-003
■ Bi-metal blades
provide strength,
flexibility and longer life
Description
C-56
www.idealindustries.com
Qty./Pack
Cat. No.
12 in. x 18T Blades
10
35-271
12 in. x 24T Blades
10
35-272
12 in. x 32T Blades
10
35-273
12 in. x 18T Blades
100
35-262
12 in. x 24T Blades
100
35-263
12 in. x 32T Blades
100
35-264
1-800-435-0705 for Customer Service
Wire Management
D
Plenum Ties
Halar® Ties
■ For use in air handling/plenum environments
■ Easily recognized maroon color
■ Low smoke density and excellent flammability rating, non-flammable UL 94V-O
■ Superior chemical resistance
■ 300°F temperature use
Cable Ties
Description
Length
Width
Thickness
Max. Bundle Tensile Strength
Maroon Halar
8.0 in./203mm
.178 in./4.5mm
.053 in./1.35mm
1/16 - 2 in.
Maroon Halar
11.0 in./279mm
.178 in./4.5mm
.053 in./1.35mm
1/16 - 3 in.
Qty./Bag
Cat. No.
50 lbs.
100
IT2S-C702
50 lbs.
100
IT3S-C702
Approximate dimensions.
Halar® is a trademark of Ausimont Chemical Co.
UL Listed for Air Handling Ties
■ UL Listed nylon 6/6 cable ties are suitable for use in air handling spaces in
accordance with Section 300-22(C) & (D) of the National Electrical Code
■ See page D-4 for additional technical information
Standard Ties
Description
Length
Width
Thickness
Max. Bundle Tensile Strength Mil-Spec Reference
Qty./Bag
Cat. No.
100
IT2S-C35
Maroon Nylon
Natural Nylon
Natural Nylon
7.5 in./190mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 1-7/8
50 lbs.
UV Black Nylon
MS3367-1-9
MS3367-1-0
UV Black Nylon
Maroon Nylon
Natural Nylon
Natural Nylon
11.2 in./284mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 3-1/16
50 lbs.
UV Black Nylon
MS3367-7-0
UV Black Nylon
Natural Nylon
Natural Nylon
UV Black Nylon
MS3367-7-9
MS3367-2-9
14.5 in./368mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 4-1/8
50 lbs.
MS3367-2-0
UV Black Nylon
100
IT2S-C
1000
IT2S-M
100
IT2S-C0
1000
IT2S-M0
100
IT3S-C35
100
IT3S-C
500
IT3S-D
100
IT3S-C0
500
IT3S-D0
100
IT4S-C
500
IT4S-D
100
IT4S-C0
500
IT4S-D0
Mounting Ties
Description
Length
Width
Strap Thickness
Max. Bundle
Tensile Strength Screw Size
Natural Nylon
Natural Nylon
8.1 in./206mm
.178 in./4.52mm
.053 in./1.35mm
1/16 - 1-3/4 in.
UV Black Nylon
50 lbs.
No. 10
Qty./Bag
Cat. No.
100
IT2SMH-C
1000
IT2SMH-M
100
IT2SMH-C0
Cable Tie Bag
■ Keep your cable ties right where you need them, eliminate loss with this
convenient easy-to-use bag that clips securely onto your belt
■ Includes a bag for 8 in. cable ties and a bag for 11 in. cable ties, they
easily clip together or can be used separately
■ Elastic cord quickly and easily cinches to keep ties securely in place
Description
Cat. No.
Cable Tie Bag
IT-BAG
D-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Stainless Steel
Pro-Met™
Cut angle 60°
■ Larger stainless steel barb for more resistance
■ Metal tooth is cut and set firmly in place using exclusive manufacturing processes
Central Rib Replaces Teeth
Superior Strength
■ Central rib design allows for maximum
flexibility without losing resistance
■ Excellent impact
resistance
Pitch 45°
■ Central relief eliminates breaking points
Unique Tail Design
Ergonomic Head
■ Straight tail gives you more tightening diameter
■ Spear point simplifies installation
■ Head design allows
for quicker installation
■ Ribbing on the point allows for grabbing and
tightening
■ Smooth head protects
installer hands
■ Decrease your
application costs
Miniature (18 lb.) Ties Natural and UV Black
Description
Natural Nylon
Length
3.9 in./100mm
Width
0.10 in./2.5mm
Cable Ties
■ Infinitely adjustable to any bundle diameter
Thickness
0.035 in./0.9mm
Max. Bundle
0.9 in./24mm
Tensile Strength
18 lbs./18 DaN
UV Black Nylon
Qty./Bag
Cat. No.
100
IMET1M-C
100
IMET1M-C0
Intermediate (40 lb.) Ties Natural and UV Black
Description
Natural Nylon
Length
5.5 in./140mm
Width
0.14 in./3.5mm
Thickness
0.039 in./1.0mm
Max. Bundle
1.4 in./36mm
Tensile Strength
40 lbs./28 DaN
UV Black Nylon
Qty./Bag
Cat. No.
100
IMET1_5I-C
100
IMET1_5I-C0
Natural Nylon
100
IMET3I-C
Natural Nylon
1000
IMET3I-M
UV Black Nylon
100
IMET3I-C0
UV Black Nylon
1000
IMET3I-M0
11 in./280mm
0.14 in./3.5mm
0.039 in./1.0mm
3.1 in./80mm
40 lbs./28 DaN
Standard (50 lb.) Ties Natural and UV Black
Description
Length
Width
Thickness
Max. Bundle
Tensile Strength
Natural Nylon
Natural Nylon
7.9 in./200mm
0.18 in./4.5mm
0.043 in./1.1mm
2.0 in./51mm
50 lbs./40 DaN
Qty./Bag
Cat. No.
100
IMET2S-C
1000
IMET2S-M
UV Black Nylon
100
IMET2S-C0
UV Black Nylon
1000
IMET2S-M0
Natural Nylon
100
IMET3S-C
Natural Nylon
1000
IMET3S-M
UV Black Nylon
100
IMET3S-C0
UV Black Nylon
1000
IMET3S-M0
Natural Nylon
100
IMET4S-C
Natural Nylon
1000
IMET4S-M
11.4 in./290mm 0.18 in./4.5mm
14.2 in./360mm 0.18 in./4.5mm
0.043 in./1.1mm
0.043 in./1.1mm
3.0 in./76mm
4.0 in./101mm
50 lbs./40 DaN
50 lbs./40 DaN
UV Black Nylon
100
IMET4S-C0
UV Black Nylon
1000
IMET4S-M0
Light Heavy-Duty (120 lb.) Ties Natural and UV Black
Description
Length
Width
Thickness
Max. Bundle
Tensile Strength
Natural Nylon
Natural Nylon
Qty./Bag
Cat. No.
50
IMET4LH-L
500
IMET4LH-D
UV Black Nylon
50
IMET4LH-L0
UV Black Nylon
500
IMET4LH-D0
14.2 in./360mm 0.30 in./7.5mm
1-800-435-0705 for Customer Service
0.059 in./1.5mm
4.0 in./101mm
120 lbs./80 DaN
www.idealindustries.com
D-3
Powr-Tie™
Quality Construction
Angled Tail
■ One-piece design for added strength
■ Eases initial insertion alignment
■ Superior locking mechanism
■ Lowers installation costs
■ Exceeds industry tensile strength ratings
Material Selection
Low Insertion Force
■ Natural General Purpose 6/6 Nylon
- Suitable for most applications
- Meets UL 94V-2 flammability ratings
- 85°C/185°F working temperature
■ Tapered thin tip reduces initial friction
Cable Ties
■ Lowest insertion force with the highest
tensile strength
■ UV Black Nylon 6/6
- Suitable for most applications with continuous or extended
exposure to outdoor elements
- Weather resistant grade, able to endure ultraviolet (UV) light
- Meets UL 94V-2 flammability ratings
- 85°C/185°F working temperature
■ Reduces installation fatigue
No Burrs or Sharp Edges
■ Smooth corners provide added safety
■ Rounded edges eliminate insulation damage
■ Heat Stabilized Black Nylon 6/6
- Suitable for most applications with continuous or extended
exposure to high temperatures
- Meets UL standards for electrical applications
- Meets UL 94V-2 flammability ratings
- 125°C/254°F working temperature
Stepped Tail Gripper
■ Tapered tail grip assures positive threading
■ Stepped tail allows for easier grabbing
and tightening once engaged
Miniature (18 lb.) Ties Natural & UV Black
Description
Length
Width
Thickness
4.0 in./102mm
.094 in./2.39mm
.042 in./1.06mm
Max. Bundle Tensile Strength Mil-Spec Reference
Natural Nylon
Natural Nylon
1/16 - 7/8
18 lbs.
UV Black Nylon
Natural Nylon
UV Black Nylon
MS3367-4-9
MS3367-4-0
6.1 in./154mm
.094 in./2.39mm
.042 in./1.06mm
1/16 - 1-1/2
18 lbs.
Natural Nylon
Natural Nylon
8.1 in./206mm
.094 in./2.39mm
.042 in./1.06mm
1/16 - 2-3/16
18 lbs.
UV Black Nylon
Qty./Bag
Cat. No.
100
IT1M-C
1000
IT1M-M
100
IT1M-C0
100
IT1_5M-C
100
IT1_5M-C0
100
IT2M-C
1000
IT2M-M
100
IT2M-C0
*IM, 1_5M & 2M Series
*
*
Intermediate (40 lb.) Ties Natural & UV Black
Description
Length
Width
Thickness
Max. Bundle Tensile Strength Mil-Spec Reference
Natural Nylon
Natural Nylon
MS3367-5-9
5.7 in./145mm
.140 in./3.56mm
.049 in./1.24mm
1/16 - 1-7/16
40 lbs.
UV Black Nylon
MS3367-5-0
UV Black Nylon
Natural Nylon
Natural Nylon
UV Black Nylon
MS53367-5-9
8.8 in./224mm
.140 in./3.56mm
.049 in./1.24mm
1/16 - 2-3/8
40 lbs.
MS53367-5-0
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
11.5 in./292mm
.142 in./3.60mm
.055 in./1.40mm
1/16 - 3-3/8
40 lbs.
14.5 in./368mm
.142 in./3.60mm
.055 in./1.40mm
1/16 - 4
40 lbs.
*1_5 & 2I Series
D-4
www.idealindustries.com
Qty./Bag
Cat. No.
100
IT1_5I-C
1000
IT1_5I-M
100
IT1_5I-C0
1000
IT1_5I-M0
100
IT2I-C
1000
IT2I-M
100
IT2I-C0
1000
IT2I-M0
100
IT3I-C
100
IT3I-C0
100
IT4I-C
100
IT4I-C0
*
1-800-435-0705 for Customer Service
*
Wire Management
Standard (50 lb.) Ties Natural, UV Black & Heat Stabilized Black
Length
Width
Thickness
Max. Bundle Tensile Strength Mil-Spec Reference
Natural Nylon
MS3367-1-9
Natural Nylon
UV Black Nylon
7.5 in./190mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 1-7/8
50 lbs.
UV Black Nylon
MS3367-1-0
Qty./Bag
Cat. No.
100
IT2S-C
1000
IT2S-M
100
IT2S-C0
1000
IT2S-M0
100
IT2S-C30
100
IT3S-C
Heat Stabilized Black Nylon
Natural Nylon
Natural Nylon
UV Black Nylon
MS3367-7-9
11.2 in./284mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 3-1/16
50 lbs.
MS3367-7-0
UV Black Nylon
Natural Nylon
Natural Nylon
UV Black Nylon
MS3367-2-9
14.5 in./368mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 4-1/8
50 lbs.
MS3367-2-0
UV Black Nylon
Natural Nylon
UV Black Nylon
17.0 in./432mm
.190 in./4.82mm
.053 in./1.34mm
1/16 - 4-3/4
50 lbs.
500
IT3S-D
100
IT3S-C0
500
IT3S-D0
100
IT4S-C
500
IT4S-D
100
IT4S-C0
500
IT4S-D0
100
IT5S-C
100
IT5S-CO
*2S, 3S & 4S Series
UL Listed Nylon 6/6 cable ties are suitable for use in air handling spaces in accordance with Section 300-22(C) & (D) of the National Electrical Code.
*
Cable Ties
Description
*
Light Heavy-Duty, Heavy-Duty & Extra Heavy-Duty Ties Natural, UV Black & Heat Stabilized Black
Description
Length
Natural Nylon
8.7/220.9mm
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
15.1 in./384mm
Width
.300 in./7.62mm
.300 in./7.62mm
Thickness
.076 in./1.93mm
.075 in./1.90mm
Max. Bundle Tensile Strength Mil-Spec Reference
2-1/16
3/16-4-1/16
120 lbs.
120 lbs.
17.8 in./451mm
.300 in./7.62mm
.075 in./1.90mm
3/16-5-1/4
120 lbs.
24.2 in./614mm
.300 in./7.62mm
.075 in./1.90mm
3/16-7
120 lbs.
25.3 in./642mm
.340 in./8.64mm
.090 in./2.29mm
3/16-7-3/16
175 lbs.
33.1 in./841mm
.340 in./8.64mm
.090 in./2.29mm
3/16-9-3/4
175 lbs.
37.1 in./942mm
.340 in./8.64mm
.090 in./2.29mm
3/16-11
175 lbs.
47.8 in./1214mm
.340 in./8.64mm
.090 in./2.29mm
3/8-14-1/2
175 lbs.
Natural Nylon
Gray Nylon
UV Black Nylon
UV Black Nylon
22.8 in./579mm
.50 in./12.7mm
*4LH, 7H, 10H, 11H, 14H Series
1-800-435-0705 for Customer Service
.080 in./2.03mm
3/16-6
250 lbs.
Qty./Bag
Cat. No.
100
IT2LH-C
100
IT2LH-C0
MS3367-3-9
50
IT4LH-L
MS3367-3-0
50
IT4LH-L0
MS3367-10-9
50
IT5LH-L
50
IT5LH-L0
50
IT7LH-L
50
IT7LH-L0
50
IT7H-L
IT7H-L0
MS3367-10-0
50
MS3367-12-9
50
IT10H-L
MS3367-12-0
50
IT10H-L0
MS3367-13-9
50
IT11H-L
MS3367-13-0
50
IT11H-L0
MS3367-16-9
50
IT14H-L
MS3367-16-8
50
IT14H-L8
MS3367-16-0
50
IT14H-L0
100
IT6EH-C0
*
www.idealindustries.com
*
D-5
Mounting Head Ties Natural and UV Black
■ Use for attaching bundles to surfaces
■ Allows bundling before and after
mounting
Description
UV Black Nylon
Width
Strap Thickness
Max. Bundle Tensile Strength
Screw Size
6.0 in./152mm
.140 in./3.55mm
.048 in./1.21mm
1/16 - 1-1/4 in.
30 lbs.
No. 8
8.1 in./206mm
.178 in./4.52mm
.053 in./1.35mm
1/16 - 1-3/4 in.
50 lbs.
No. 10
Qty./Bag
Natural Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
Natural Nylon
UV Black Nylon
11.8 in./300mm
.189 in./4.80mm
.050 in./1.27mm
1/16 - 3 in.
50 lbs.
No. 10
14.5 in./370mm
.189 in./4.80mm
.060 in./1.52mm
1/16 - 4 in.
50 lbs.
No. 10
15.7 in./398mm
.300 in./7.62mm
.075 in./1.90mm
3/16 - 4-1/16 in.
120 lbs.
1/4”
*4LH Series; **2S Series
UL Listed Nylon 6/6 cable ties are suitable for use in air handling spaces in accordance with Section 300-22(C) & (D) of the National Electrical Code.
Cat. No.
100
IT1_5IMH-C
100
IT1_5IMH-C0
100
IT2SMH-C
1000
IT2SMH-M
100
IT2SMH-C0
100
IT3SMH-C
100
IT3SMH-C0
100
IT4SMH-C
100
IT4LHMH-C
100
IT4LHMH-C0
**
*
*
Identification Ties
■ Write-on surface
■ Bundle and identify at the
same time
L
H
L
H
Cable Ties
Natural Nylon
Length
Description
Length
Width
Thickness
Natural Nylon
4.0 in./102mm
.100 in./2.54mm
.044 in./1.12mm
Max. Bundle Tensile Strength
1/16 - 7/8 in.
Natural Nylon
7.8 in./200mm
.181 in./4.59mm
.055 in./1.40mm
1/16 - 1-7/8 in.
50 lbs.
Natural Nylon
14.1 in./358mm
.187 in./4.75mm
.055 in./1.40mm
3/8 - 4 in.
50 lbs.
18 lbs.
Pad Size (H X L)
Qty./Bag
Cat. No.
5/16 in. x 1 in.
100
IT1MID-C
1-1/8 in. x 1/2 in.
100
IT2SID-C
1-1/8 in. x 1/2 in.
100
IT4SID-C
Screw Mounting Bases - Standard and Low Profile
Standard Screw Mount
Description
Low Profile Mount
Length
Width
Height
Slot Height
Slot Width
Screw Size
.590 in./15mm
.370 in./9.40mm
.270 in./6.86mm
.062 in./1.59mm
.190 in./4.83mm
No. 6
.870 in./22mm
.640 in./16.26mm
.380 in./9.65mm
.125 in./3.18mm
.300 in./7.62mm
1/4 in.
.750 in./19mm
.500 in./12.70mm
.120 in./3.04mm
.062 in./1.57mm
.180 in./4.57mm
No. 8
Screw Mount Natural Nylon
Screw Mount UV Black Nylon
Screw Mount Natural Nylon
Screw Mount UV Black Nylon
Low Profile Mount
D-6
www.idealindustries.com
Qty./Bag
Cat. No.
100
IT1SMB-C
100
IT1SMB-C0
100
IT2SMB-C
100
IT2SMB-C0
100
IT1LPMB-C
1-800-435-0705 for Customer Service
Wire Management
Mounting Pads
“Stay-N-Place”
Tab
■ Patented stay-in-place tab keeps cable ties from sliding down during
vertical applications
Smooth Radius
Cradle
Lead-N-Feature
■ Lead-N-feature allows easy insertion for hard to reach applications
■ Four-sided entry slots save time during placement orientation
Webbed Punch
Through Screw Hole
■ Webbed punch through screw hole allows maximum
adhesive surface area, along with easy insertion of
mechanical fasteners
Rubber or Acrylic
Base Adhesives
■ Low Profile is essential in confined spaces
Low Profile
■ UL recognized, rubber adhesive positioning device
Description
4-Sided
Entry
Width
Height
Slot Height
Slot Width
Screw Size
.74 in./19mm
.19 in./4.8mm
.05 in./1.2mm
.20 in./5.1mm
No. 4
.99 in./25mm
.20 in./5.0mm
.06 in./1.5mm
.20 in./5.1mm
No. 6
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Qty./Bag
Cat. No.
100
IT750MP-C
100
IT750MP-C0
100
IT1000MP-C
100
IT1000MP-C0
Clamps
■ Use to secure wires, cables, pipes, tubing, fiber optics
■ Ultraviolet black nylon clamps available for internal and external use
■ Use with #10 mounting screw
Description
Closed Diameter
Center to Center
Width
Natural Nylon
.125 in./3.18mm
.343 in./8.71mm
3/8 in.
Natural Nylon
.250 in./6.35mm
.421 in./10.69mm
3/8 in.
Thickness
Mounting Hole
.050 in./1.27mm .203 in./5.16mm
.050 in./1.27mm .203 in./5.16mm
UV Black Nylon
Natural Nylon
.375 in./9.52mm
.500 in./12.70mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
UV Black Nylon
Qty./Bag
Cat. No.
100
IT125CCL-C
100
IT250CCL-C
100
IT250CCL-C0
100
IT375CCL2-C
100
IT375CCL2-C0
Natural Nylon
.500 in./12.70mm
.553 in./14.05mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
IT500CCL2-C
Natural Nylon
.625 in./15.88mm
.625 in./15.88mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
IT625CCL2-C
Natural Nylon
.750 in./19.05mm
.699 in./17.75mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
IT750CCL2-C
Natural Nylon
1.000 in./25.40mm
.825 in./20.96mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
IT1000CCL2-C
Flexible Tubing*
■ Flexible polyethylene cuts easily to desired length
■ Splits open for neat “bundling” of wiring jobs
■ Snaps shut to create a continuous protective cover
Description
Qty.
Cat. No.
3/8 in. Flexible Tubing
10 ft.
772240
3/8 in. Flexible Tubing
1,200 ft.
772245
1/2 in. Flexible Tubing
1 ft.
772241
1/2 in. Flexible Tubing
900 ft.
772244
1 in. Flexible Tubing
5 ft.
772242
1 in. Flexible Tubing
250 ft.
772243
*Buchanan branded
1-800-435-0705 for Customer Service
www.idealindustries.com
D-7
Cable Ties
■ Smooth radius cradle eliminates possible damage to
cable while providing stable support
Material Specifications
Cable Ties
Nylon 6/6 - General Purpose
General purpose nylon 6/6 features lightweight, high-strength and a
wide-temperature range. Even at higher than recommended
temperatures or exposure to flame, nylon does not give off toxic or
irritating by-products. Nylon 6/6 is hydroscopic and, therefore,
absorbs or releases moisture depending on its environment. Moisture
level of the material will affect tensile strength, stiffness and elongation
of the product.
Halar®
Although weaker than general-purpose nylon 6/6 (about 37%),
Halar is resistant to a wide range of chemicals such as concentrated
hydrofluoric and sulfuric acids. It is radiation resistant. Halar also
withstands high temperatures, ultraviolet light exposure and meets
U.L. flammability requirement 94V-O. Its outstanding characteristic is
a lower smoke density when burned. This makes Halar more
desirable for use in areas where smoke generation is a concern.
Nylon 6/6 - UV Stabilized
General purpose nylon 6/6 with increased resistance to ultraviolet
light. Carbon black is one of the most effective stabilizers known
today. A uniform dispersion of cabon black provides good ultraviolet
light resistance without adversely affecting physical properties. The
addition of carbon black, or any other ultraviolet light stabilizer,
prolongs the useful life of plastic products used outdoors, but it does
not totally eliminate the destructive effects of the light.
Nylon 6/6 - Heat Stabilizer
Used for continuous or extended exposure to high temperatures
(up to 250°F). They contain specially formulated heat stabilizers to
provide additional thermal endurance to prevent reduction in
physical properties and fatigue as a result of high temperatures.
Heat stabilized nylon meets the UL standard for electrical
applications.
Material
Continuous
Operating Temp.
Max.
Min.
Tensile
AT 73F
ASTM D-638
UL
Flame
Rating
Gamma
Radiation
Resistance
UV
Resistance
Nylon 6/6 –
General Purpose
185° F
85° C
-40° F
-40° C
12,000
94V-2
1 X 10 Rads
Poor
Nylon 6/6 –
UV Stabilized
185° F
85° C
-40° F
-40° C
12,000
94V-2
1 X 10 Rads
Very Good
Nylon 6/6 –
Heat Stabilized
220° F
105° C
-40° F
-40° C
12,000
94V-2
1 X 10 Rads
Very Good
Halar®
284° F
140° C
-50° F
-46 °F
7,500
94V-0
1 X 10 Rads
Excellent
Heat Stabilized
Resistant
6.6 Nylon
Black
6.6 Nylon
Halar®
-0
-30
-702
Material Suitability Chart (10 = most suitable, 1 = least suitable)
Design Criteria
Weather
Natural
6.6 Nylon
Part # Suffix Material Designation
Loop Tensile Strength
7
7
7
5
Low Temperature Service
6
6
6
7
High Temperature Service
5
5
6
7
Flammability
6
6
6
9
Ultraviolet Resistance
1
6
4
9
Radiation Resistance
3
3
3
9
Overall Chemical Resistance
- Hydrocarbons
- Chlorinated Hydrocarbons
- Acids
- Bases
- Salts
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
10
10
10
10
10
10
Low
Low
Low
High
Relative Price
*Halar is a trademark of Ausimont Chemical Co.
®
D-8
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
IDEAL Cable Tie Catalog Numbering System
I = IDEAL INDUSTRIES, INC.
2
Size
S
C
TENSILE Strength
Qty. Per
Package
Style
(at beginning of Catalog Number) Approximate
M = Miniature (18 lbs.)
Bundle Diameter I = Intermediate (40 lbs.)
for ties
S = Standard (50 lbs.)
LH = Light-Heavy Duty (120 lbs.)
Family:
H = Heavy Duty (175 lbs.)
T = Standard One-Piece Cable Tie
EH = Extra-Heavy Duty (250 lbs.)
MET = Stainless Steel Barb Tie
=
=
=
=
=
=
=
Standard Tie
Mounting
Push Mount
Releasable
Identification
Mounting Base
Low Profile
Mounting Base
MP = Mounting Pad
CCL = Cable Clamp
L
C
D
M
=
=
=
=
50
100
500
1000
_
0
8
30
35
702
=
=
=
=
=
=
Natural
UV Black
Gray
Heat Stabilized Black
Maroon
Halar
Cable-Tie Installation Tools
Military Cross Reference
Current MIL Std.
Part Number*
Cable Tie
Part Number
MS3367-1-*
MS3367-2-*
MS3367-3-*
MS3367-4-*
MS3367-5-*
MS3367-5-*
MS3367-7-*
MS3367-10-*
MS3367-13-*
MS3367-16-*
IT2S-*
IT4S-*
IT4LH-*
IT1M-*
IT1.5I-*
IT2I-*
IT3S-*
IT7H-*
IT11H-*
IT14H-*
*Color and package denotation
_
MH
PM
RL
ID
MB
LPMB
Color
41-995
BCTT-200
41-990
■ Consistent, positive tension
■ Flush cut-off leaves no projections to damage nearby wires or
components
■ Lightweight economy model for smaller jobs
■ Standard and heavy-duty models feature rugged, die-cast
aluminum construction with comfortable, cushioned grips
■ Scrap tail stays in tool until trigger is released
Description
Cat. No.
Economy – use w/intermediate & standard ties*
BCTT-200
Standard – use w/intermediate & standard ties
41-990
Heavy-duty – use w/standard & heavy-duty ties
41-995
*Color may vary
1-800-435-0705 for Customer Service
www.idealindustries.com
D-9
Cable Ties & Tools
IT
Cable Staples
■ Full line of quality insulated and non-insulated staples to
fit all cabling applications
■ Packaged to answer electrician’s need for clean, dry,
rust-free staples
■ Convenient reclosable containers keep staples organized
in the truck and on the job-site
Cable Staples
Plastic Insulated Staples
Plastic Insulated Cable Stacker
■ Use with wider cable such as
Romex®, NM and UF
■ Use with wider cable such as
Romex®, NM and UF
■ Smooth plastic saddle prevents
damage to cable
■ High-grade carbon steel
construction
■ Zinc-plated nails resist rust and
corrosion
■ Smooth plastic saddle prevents
damage to cable
Description
■ Zinc-plated nails resist rust and
corrosion
Quantity/Package
Cat. No.
1/2 in. Insulated
50/Bag
BPS2-50
1/2 in. Insulated
100/Bag
BPS2-1
Description
1/2 in. Insulated
200/Jar
BPS2-JR
1/2 in. Insulated
400/Jar
1/2 in. Insulated
500/Bag
Quantity/Package
Cat. No.
1/2 in. 2 Cable Stacker
50/Bag
BPS2/2-50
BPS2B-JR
1/2 in. 3 Cable Stacker
50/Bag
BPS2/3-50
BPS2-5
1/2 in. 4 Cable Stacker
50/Bag
BPS2/4-50
Romex is a registered trademark of General Cable Co.
®
1/2 in. Insulated
5,000/Bucket
BPS2-5M
1/2 in. Insulated
30,000/Barrel
BPS2-30K
3/4 in. Insulated
50/Bag
BPS3-50
3/4 in. Insulated
100/Bag
BPS3-1
3/4 in. Insulated
175/Jar
BPS3-JR
■ Use with wider cable such as
Romex®, NM and UF
3/4 in. Insulated
250/Bag
BPS3-2
■ High-grade carbon steel with flexible PVC insulation
Romex is a registered trademark of General Cable Co.
Insulated Staples
®
■ Sharp-point legs drive straight without splitting wood
■ Resist rust and corrosion
Carbon Steel Staples
■ Use with wider cable such as
Romex®, NM and UF
■ High-grade carbon steel construction
Description
Quantity/Package
Cat. No.
1/2 in. x 1 in.
450/Jar
BICS-JR
9/16 in. x 1-1/4 in.
350/Jar
BICS2-JR
Romex® is a registered trademark of General Cable Co.
■ Sharp-point legs drive straight without
splitting wood
Metal Insulated Staple
■ Resist rust and corrosion
Description
Quantity/Package
Cat. No.
1/2 in. x 1 in.
100/Box
BCS1-1
■ Use with wider cable such as
Romex®, NM and UF
1/2 in. x 1 in.
500/Jar
BCS1-JR
■ Resists rust and corrosion
■ Blue plastic saddle prevents wire
damage
1/2 in. x 1 in.
500/Box
BCS1-5
1/2 in. x 1 in.
5,000/Bucket
BCS1-5M
100/Box
BCS2-1
9/16 in. x 1-1/4 in.
400/Jar
BCS2-JR
9/16 in. x 1-1/4 in.
500/Box
BCS2-5
9/16 in. x 1-1/4 in.
5,000/Bucket
BCS2-5M
9/16 in. x 1-1/4 in.
Romex® is a registered trademark of General Cable Co.
D-10
www.idealindustries.com
Description
1/2 in. Metal Staple w/Plastic Insulator
Quantity/Package
Cat. No.
200/Jar
BMICS-JR
Romex® is a registered trademark of General Cable Co.
1-800-435-0705 for Customer Service
Wire Management
Sound Straps
Data Cable Staples
■ Use with smaller insulated wire
and cord applications such as
lamps, thermostats, telephones
and sound systems
■ Secures Category 3, 5 and other
4-pair twisted wire
■ Smooth plastic saddle prevents
damage to wires
■ Zinc-plated nails resist rust and
corrosion
■ Blue plastic saddle prevents
damage to cable
Description
Quantity/Package
Cat. No.
Description
3/16 in. White
25/Clamshell
772804
Data Staple
25/Bag
772880
3/16 in. White
100/Clamshell
772805
Data Staple
250/Jar
BPDATAS-JR
3/16 in. White
250/Jar
BPLVSW-JR
3/16 in. Black
25/Clamshell
772810
3/16 in. Black
100/Clamshell
772812
3/16 in. Black
250/Jar
BPLVSB-JR
Quantity/Package
Coaxial Cable Straps
Fiber Insulated Cable Staples
■ Use with round cable such as
CATV/VCR, RG-5, RG-6 and phone
cables or with plastic and metal tubing
■ Use with smaller wire and cord
applications such as low voltage
bells, thermostats, telephones
and sound systems
■ Smooth plastic saddle prevents
damage to cable
Cat. No.
■ Insulated fiber provides
enhanced strength and dielectric
resistance
■ Zinc-plated nails resist rust and corrosion
Description
Quantity/Package
Cat. No.
1/4 in. Black
25/Clamshell
772806
■ Sharp-point legs drive straight
without splitting wood
1/4 in. Black
100/Clamshell
772807
■ Resists rust and corrosion
1/4 in. Black
250/Jar
BPCXSB-JR
1/4 in. White
25/Clamshell
772808
1/4 in. White
100/Clamshell
772809
1/4 in. White
250/Jar
BPCXSW-JR
7/16 in. White
50/Bag
BPS4-50
Description
Quantity/Package
Cat. No.
Brown Fiber
40/Clamshell
772840
White Fiber
40/Clamshell
772841
Plastic Insulated Service Entrance Straps
Carbon Steel Service Entrance Staples
■ Use with service entrance cable
and conduit
■ Use with service entrance cable
and conduit
■ Smooth plastic saddle
prevents damage to cable
■ High-grade carbon steel
construction
■ Zinc-plated nails resist rust and
corrosion
■ Sharp-point legs drive straight
without splitting wood
■ Resists rust and corrosion
Description
Quantity/Package
Cat. No.
#6 SER & 1/2 in. EMT
50/Bag
BSER6-50
#6 & #8 SEU
50/Bag
BSEU6-50
#2 SER & 3/4 in. EMT
25/Bag
BSER2-25
#2 SEU
25/Bag
BSEU2-25
4/0 SER
5/Bag
BSER4/0-5
4/0 SEU
5/Bag
BSEU4/0-5
1-800-435-0705 for Customer Service
Description
Quantity/Package
Cat. No.
1-5/16 in. x 3/4 in.
100/Box
BMSE150-1
1-1/2 in. x 1-1/16 in.
100/Box
BMSE175-1
www.idealindustries.com
D-11
Cable Staples
■ Zinc-plated nails resist rust and
corrosion
Heat Shrinkable Tubing
Thermo-Shrink®
UF Splice Kits
Thermo-Shrink® Self-Sealing
UF Splice Kit
■ Direct burial rated
■ Fully waterproof, submersible and
re-enterable to make future
changes or repairs
■ 14/3 with and without ground
thru 8/3 without ground, UF
cable range
Heat Shrink
■ Meets the requirements of
the 2002 NEC Code 110-14 (b)
and UL486D
■ Stretcher kit repairs a 7 in. to 10” in.
section damaged or destroyed by
a trencher.
■ Accommodates 14 to 10 AWG
wire range
■ 600V Maximum, 105°C rating
■ Meets the requirements of the 2002
NEC Code 110-14(b) and UL486D
E123896
Description
Cat. No.
UF Splice Kit - 14-8 AWG, Tubing 1.1 in. x 8 in.
46-400
UF Stretcher Kit* - 14-8 AWG, Tubing 1.1 in. x 18 in.
46-410
E123896
■ 600V Maximum, 105°C rating
Description
Cat. No.
Self Sealing UF Splice Kit
46-411
Thermo-Shrink® Torch
*Stretcher kit connector is 11.5 in.
■ Self-igniting trigger, starts fast and easy
Thermo-Shrink® Al/Cu Splice Kits
■ Fully adjustable regulator valve and
air inlet port to achieve the ideal
flame setting
■ Direct burial rated, underground splice kits
■ Heavy-wall heat shrink tubing with
adhesive liner provides complete
insulation and protection
■ 1 in. wide brass burn-tip
accommodates a variety of heat
shrink applications
■ Connector can be used
for aluminum and/or
copper cable
■ Heavy duty, stainless steel burn
tube, combined with a cast
aluminum body with epoxy finish,
creates a durable long lasting tool
for almost any environment
■ Meets the requirements of
the 2005 NEC Code 110-14(B)
■ 600V maximum, 105°C rating
■ 1 - 20 threads screw directly onto
14 oz. and 16 oz. propane gas tanks
Description
Cat. No.
Underground Splice Kit – 8 to 4 AWG, Tubing 3/4 in. x 6 in.
46-401
Underground Splice Kit – 4 AWG to 1/0, Tubing 1.1 in. x 8 in.
46-402
Description
Cat. No.
Underground Splice Kit – 1/0 to 250 KCMIL, Tubing 1-1/2 in. x 12 in.
46-403
Heat Shrink Torch
46-420
Thermo-Shrink® Copper Butt Splice Kits
■ UL Listed
■ Provides a fully-insulated
butt splice
■ 600V Maximum, 105°C rating
Description
Cat. No.
Butt Splice Kit – Copper 14-8 AWG
46-404
Butt Splice Kit – Copper 8-2 AWG
46-405
D-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Thermo-Shrink® Thin-Wall
Heat Shrinkable Tubing
■ Polyolefin material electrically insulates and protects in-line
components, disconnect terminals and splices with its high strength
and excellent resilience
■ Use to bundle wires for very flexible light-duty harnesses
■ Highly flame-retardant and flexible
■ Resistant to common fluids and solvents
Heat Shrink
■ Meets UL 224 125°C VW-1 600V, SAE-AMS-DTL-23053/5
Class 1 & 3
■ Material: No PBB’s, PBBO’s, PBBE’s, Cadium < 5PPM;
Lead < 10PPM
■ 2:1 shrink ratio
■ Minimum shrink temperature:
70°C
■ Minimum fully recovery temperature: 100°C
■ Operating temperature:
-55°C to +135°C
Property
Test Method
Typical Data
Normal
Size
(Inches)
Tensile strength
ASTM D 638
14MPa
3/64
0.063”/1.6mm 0.024”/0.6mm
0.013”/0.33mm 22-18 AWG
Elongation at break
ASTM D 638
600%
1/16
0.079”/2.0mm 0.031”/0.8mm
0.014”/0.36mm
Elongation after aging at
175°C for 168 hours
ASTM D 638
350%
3/32
0.122”/3.1mm 0.047”/1.2mm
0.017”/0.44mm 14-12 AWG
Technical Data
UL 224 VW-1/
SAE-AMS-DTL-23053/5
Pass
Heat shock (250°C/4 hours)
ASTM D 2671
No cracking
Cold bend test (-55°C/4 hours)
ASTM D 2671
No cracking
Flammability
Dielectric strength
ASTM D 150
20KV/mm
Volume resistance
ASTM D 876
1014Ω.cm
Copper corrosion
UL 224
Pass
Water absorption
ASTM D 570
0.15%
SAE-AMS-DTL-23053/5
Pass
Longitudinal shrinkage
UL 224
0±5%
Eccentricity
UL 224
30%
Chemical resistance
1/8
3/16
Expanded
I.D.
(Min.)
Nominal
Recovered
I.D. (Max.)
0.146”/3.7mm 0.063”/1.6mm
0.205”/5.2mm 0.094”/2.4mm
Recovered
Wall Thickness
+/-10%
Cable
Range*
16 AWG
Cat.
No.
4 ft.
Disk
46-600
4 ft.
Disk
46-601
4 ft.
Disk
46-602
Bag
Bag
Disk
Spool
46-310
46-311
46-603
46-312
0.017”/0.44mm
24-20
AWG
6 in.
2 ft.
4 ft.
1,000 ft.
0.020”/0.50mm
20-14
AWG
6 in.
2 ft.
4 ft.
1,000 ft.
Bag
Bag
Disk
Spool
46-313
46-314
46-604
46-315
0.022”/0.56mm
14-8
AWG
6 in.
2 ft.
4 ft.
500 ft.
Bag
Bag
Disk
Spool
46-316
46-317
46-605
46-318
10-6 AWG
4 ft.
Disk
46-606
1/4
0.268”/6.8mm 0.126”/3.2mm
5/16
0.346”/8.8mm 0.157”/4.0mm 0.022”/0.56 mm
3/8
0.421”/10.7mm 0.185”/4.7mm
0.022”/0.56mm
8-4
AWG
6 in.
2 ft.
4 ft.
200 ft.
Bag
Bag
Disk
Spool
46-319
46-320
46-607
46-321
1/2
0.539”/13.7mm 0.252”/6.4mm
0.026”/0.65mm
4-1
AWG
6 in.
2 ft.
4 ft.
200 ft.
Bag
Bag
Disk
Spool
46-322
46-323
46-608
46-324
3/4
0.807”/20.5mm 0.374”/9.5mm
0.027”/0.69mm
2-250
MCM
6 in.
2 ft.
4 ft.
200 ft.
Bag
Bag
Disk
Spool
46-325
46-326
46-609
46-327
2/0-500
MCM
6 in.
2 ft.
4 ft.
100 ft.
Bag
Bag
Disk
Spool
46-328
46-329
46-610
46-330
1
1.043”/26.5mm 0.500”/12.7mm 0.031”/0.80mm
*Reference only - Consult the wire manufacturer's catalog for specific
O.D. of wire and insulation.
1-800-435-0705 for Customer Service
Pkg.
Type
Length
C
www.idealindustries.com
US
D-13
Thermo-Shrink® Heavy-Wall Heat Shrinkable Tubing
■ TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
■ Adhesive liner provides complete insulation and protection to
electrical splices in above-grade, underground or underwater
applications
■ Maximum flame retardancy
■ Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western
Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15,
IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and
NEMA insulation thickness requirements
Properties
Heavy Wall
Heat Shrink
Shrink Temperatures
120°C to 250°C
(200°C recommended)
■ Continuous operating temperature from -55°C to 110°C
Continuous Operating Temperature
-55°C to 110°C
■ Rated for 600V, 90°C continuous use
Tensile Strength (PSI)
2,100 PSI min.
■ Shrink temperature of 120°C
Ultimate Elongation
600% min.
Secant Modulus @ 2% Strain
25,000 PSI max.
Specific Gravity
1.20 max.
Heat Aging, 168 hrs. @ 175°C Tensile
Strength Elongation
500%
Model
Expanded Recovered
Nominal
l.D.
I.D.
Recovered
Cable Length
(Min.)
(Max.) Wall Thickness Range* (Inches)
TS-46-400
.400
TS-46-750
.750
TS-46-1100
1.100
TS-46-1500
1.500
TS-46-2000
2.000
.150
.240
.350
.470
.630
6
9
48
12-6
AWG
.060
8-1/0
AWG
.090
Cat.
No.
46-343
46-344
46-346
6
9
48
46-347
46-348
46-350
Heat Shock, 4 hrs. @ 225°C
No cracks, flowing or dripping
Flammability
Self-extinguishing
Low Temperature Brittle Point
-55°C
Volume Resistivity
1013ohm-cm min.
.120
2-4/0
AWG
6
9
48
46-351
46-352
46-354
Dielectric Strength
500V/mil (20kV/min.)
Corrosive Effect
Non-corrosive
.160
3/0
AWG400 KCMIL
9
12
48
46-356
46-357
46-358
Solvent Resistance 24 hrs. Immersion per
MIL-DTL-23053
Good to excellent
Water Absorption
0.5%
.160
250750
KCMIL
9
18
48
46-369
46-371
46-372
Fungus Resistance
No growth
Longitudinal Change, 3 min.
+1%/-10%
*Reference only. Consult the wire manufacturer's catalog for specific O.D. of wire
and insulation.
All values are typical performance data and are not to be used as design data.
Thermo-Shrink® Medium-Wall Heat Shrinkable End Caps
■ Creates a watertight seal to protect the ends of power and control cords
■ Effectively offers protection against oxidation, ozone, UV radiation, etc.
■ Coated with hot melt adhesive to ensure environment seal
■ Fits easily over end of cable
■ Protect power cables up to 1000V and telecommunication cable
■ Recommended for both open air and underground power distribution cables with PVC,
lead or XLPE sheaths
■ Thermally stabilized cross-linked polylelin, coated with specially designed hot melt adhesive
Expanded
l.D. (Min.)
Recovered
I.D. (Max.)
Recovered
Wall Thickness
+/-10%
Cable Dia.
Range*
Length
(Inches)
Cat.
No.
0.55”/14mm
0.18”/4.5mm
0.079”/2.0mm
0.20”/5mm 0.47”/12mm
1.77/
45mm
46-381
0.98”/25mm
0.31”/8mm
0.091”/2.3mm
0.39”/10mm 0.71”/18mm
2.76/
70mm
46-382
1.38”/35mm
0.59”/15mm
0.118”/3.0mm
0.67”/17mm 1.18”/30mm
3.35/
85mm
46-383
2.95”/75mm
1.38”/35mm
0.138”/3.5mm
1.77”/45mm -
5.12/
130mm
46-384
4.72”/120mm
2.36”/60mm
0.157”/4.0mm
2.95”/75mm - 6.10/
4.33”/110mm 155mm
46-387
Technical Data
Property
Test Method
Typical Data
IEC 216
-55°CC to +110°C
Tensile Strength
ASTM D 638
>14 MPa
Elongation at break
ASTM D 638
>400%
Density
ASTM D 792
1.05g/cm
150°C, 168 hrs.
>300%
Dielectric Strength
IEC 243
>15KV/mm
Volume Resistance
IEC 93
1014Ω.cm
Operating Temperature
Elongation of break after aging
3
2.76”/70mm
*Consult the wire manufacturer's catalog for specific O.D. of wire and insulation.
D-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Heat Elite Plus LCD Heat Gun Kit
Thermo-Shrink®
Heat Shrink Kit
Kit includes:
■ Heat Elite Pro Heat Gun
■ Double-insulated power
cord
■ Eleven sizes of thin-wall
heat shrinkable tubing
disks (3/64 in. — 1 in.)
■ Ergonomical distribution
of weight
■ Small deflector
■ Comfortable non-slip handle
for ease of use
■ Premium T®-Cutter
Wire Cutter
■ LCD display with memory functions
■ Temperature and airflow adjustments
Description
Cat. No.
Kit includes: 46-203, 45-223, 46-941, & 46-600 through 46-610
46-007
■ Stand-by mode to minimize the energy consumption
■ Ceramic heating element ensures long-term coil performance
■ UL and CUL Listing
Heat Elite Heat Gun Kit
Description
■ Temperature range —
930°F (500°C)
■ Two-step switch for
heat and air flow
adjustments
■ Ergonomical distribution of weight
46-950
■ Comfortable non-slip handle for ease of use
46-955
46-954
46-953
46-951
■ UL and CUL Listing
Heat Elite Kit - Includes #46-202 Heat Gun, #46-941 Small Deflector,
and #46-954 Wide-Slot Adapter
46-204
Heat Gun Accessories
■ Double-insulated power cord
Description
Cat. No.
Heat Elite Plus LCD Kit - Includes #46-204 Heat Gun, #46-941 Small
Deflector, #46-952 Welding Adapter, #46-953 Solder Reflector Adapter,
#46-955 Overlap Welding Adapter, #46-956 Pressure Roller
46-952
46-941
Cat. No.
46-956
46-202
Heat Elite Pro Heat Gun Kit
Description
Cat. No.
Small Deflector, 1-1/4 in. diameter (For use with all Heat Elite Heat Guns)
46-941
■ Temperature range —
180°F - 1020°F (100 - 550°C)
Reduction Adapter (For use with 46-203 and 46-204)
46-950
■ Two-step switch for heat
and air flow adjustments
Glass Protection Adapter (For use with all Heat Elite Heat Guns)
46-951
Welding Adapter (For use with 46-203 and 46-204)
46-952
Solder Reflector Adapter (For use with 46-204)
46-953
Wide-Slot Adapter (For use with all Heat Elite Heat Guns)
46-954
Overlap Adapter (For use with 46-203 and 46-204)
46-955
Pressure Roller (For use with 46-204)
46-956
■ Double-insulated power cord
■ Ergonomical distribution of
weight
■ Comfortable non-slip handle
for ease of use
■ Potentiometer for infinitely temperature adjustment
■ UL and CUL Listing
Description
Heat Elite Pro Kit - Includes #46-203 Heat Gun, #46-941 Small
Deflector, #46-950 Reduction Adapter and #46-954 Wide-Slot Adapter
1-800-435-0705 for Customer Service
Cat. No.
46-203
www.idealindustries.com
D-15
Heat Guns
■ Temperature range —
180°F - 1200°F (80 - 650°C)
Wire Marker Booklets
Legend Assortments*
Legend
Wire Markers
■ Convenient pocket-size booklets
■ Plastic-impregnated cloth construction for long-lasting durability
■ Resists abrasion, moisture, dirt and oil
■ Perforated 1/4 in. x 1-1/2 in. markers can be separated into
half-length sizes
■ Non-smear black legend ensures high visibility
■ Self-sticking on wire and cable
Quantity
Cat. No.
0-9
45 Markers each
44-101
A-Z
0-15
+, –, /
10 Markers each
44-102
1-45
10 Markers each
44-103
46-90
10 Markers each
44-104
1, 2, 3
150 Markers each
44-105
A, B, C
150 Markers each
44-106
A-Z**
45 Markers each
44-148
T1, T2, T3
150 Markers each
44-107
L1, L2, L3
150 Markers each
44-108
1-15
16-90
A-Z
+, –, /, 0
6 Markers each
4 Markers each
2 Markers each
2 Markers each
44-109
1, 2, 3
A, B, C
T1, T2, T3
L1, L2, L3
45 Markers each
45 Markers each
30 Markers each
30 Markers each
44-110
+, –, AC, DC
POS, NEG, GND
NEUT
SPARE, BLANK
45 Markers each
33 Markers each
27 Markers each
21 Markers each
44-111
*Ten pages per booklet with each page bearing the legend assortment indicated. All booklets (except
44-111) contain 450 wire markers and 450 terminal markers. Booklet 44-111 includes 348 wire
markers and 348 terminal markers.
**Booklet 44-148 contains 26 pages, one page of 45 markers per letter, 1170 total markers.
■ For applications above or below ground
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 45 oz./in. width ultimate
Load Centers
Write-On Marker Booklets*
■ Contains common household
legends — bedroom, living
room, dryer, water
heater, security
system, etc.
■ Use for developing personal identification
systems
■ Surface accepts pen, pencil or rubber
stamp
Description
Cat. No.
Load Center Wire Marker Booklet
44-154
Marker Size*
(Inches)
Markers
per page
Pages
per book
Cat. No.
1 x 2-1/2
6
10
44-151
1x5
3
10
44-152
*Write-on area for 2-1/2 in. markers is 3/4 in. x 1 in. Write-on area for 5 in. markers is 1 in. x 1 in.
Adhesion: .25 oz./in. width ultimate
D-16
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Wire Marker
Dispensers
Write-On Marker Cards
■ Use for developing personal
identification systems
■ Convenient pocket-size
case (3 in. x 6 in.) holds
10 wire marker rolls
■ Cloth write-on surface
■ Accepts most writing instruments
Markers
per card
Cat. No.
5/8 x 1-1/2
14
44-753
■ Flip top for easy access and refill
Marking Pens
■ Built-in hook for hanging from belt or tool pouch
■ Fast-drying, permanent ink
will not smear
■ High-quality adhesive and 3 mil. thickness provide long-lasting,
low-profile application
■ Use on write-on marker cards
and write-on cable-tie
marker plates
■ Each plastic reel holds 8 ft. of polyester tape
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 25 oz./in. width ultimate
■ Color-coded in red or black
Description
Cat. No.
Description
Cat. No.
Marking Pen w/black ink
41-697
Dispenser w/0 through 9 legend rolls
42-301
41-698
Refill pack with 1 each of 0-9 legend rolls
42-399
Marking Pen w/red ink
Wire Marker Cards
■ Use for positive identification and keying of wires, terminal blocks, etc.
■ Convenient pocket-size cards
■ Bold, easy-to-read black characters
■ Self-sticking on wire and cable
■ Polyester film over laminate/cloth construction for long-term durability
■ Resists abrasion, moisture, dirt and oil
Markers
per legend
Markers
per card
Cat. No.
0-9 (Repeated)
3
30
43-953
A-Z
1
26
43-960
Legend
■ Individual markers measure approximately 1/4 in. x 1-1/2 in.
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C); Adhesion: 45 oz./in. width ultimate
Voltage and Conduit Markers
Large:
1 marker per card
2-1/4 in. x 9 in. each w/1-3/4 in. type
Medium:
4 markers per card
1-1/8 in. x 4-1/2 in. each w/3/4 in. type
Small:
18 markers per card
2-1/4 in. x 1/2 in. each w/5/16 in. type
■ Identify junction boxes, switches, circuit breakers, raceways, pipe
and fuse boxes
Legend
Large
Cat. No.
Medium
Cat. No.
Small
Cat. No.
■ Non-conductive for user safety
120/208V
44-295
44-296
—
■ High-adhesion properties with easy removability
277/480V
44-298
44-299
—
■ Vinyl-impregnated cloth construction provides long-lasting durability
120V
—
44-353
—
208V
—
44-355
—
240V
—
44-358
—
277V
—
—
44-410
480V
44-314
44-364
—
DANGER
44-289
—
—
HIGH VOLTAGE
44-292
—
—
■ Resist abrasion, moisture, dirt and oil
■ Non-smear, black legend on bright orange background for high
visibility
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 45 oz./in. width ultimate
1-800-435-0705 for Customer Service
www.idealindustries.com
D-17
Wire Markers
Marker Size
(Inches)
■ Dispenser tab holds
tapes firmly in
place — allows
removal of proper
tape length without waste
Barricade Tapes
Detectable Underground Tapes
■ Solid aluminum foil core tapes for protection,
location and identification of underground
utility installations
■ Meets or exceeds industry
standards including the American
Public Works Association (APWA) color code
■ Formulated to resist degradation from acid and alkali found in soils
■ Lead-free pigments and organic lead-free ink
Safety Tapes
Property
Method
Value
Thickness
ASTMD2103
5.0 Mils
Elongation
ASTMD882-75B
80%
IDEAL Specs.
Bottom layer PE
Top layer PET
Foil industry standard
ASTMD882
35 lbs./in. (15,000 PSI)
Composition
Tensile Strength
Legend
Color
Size
Cat. No.
Caution Buried
Electric Line Below
Red
3 in. x 1,000 ft.
42-201
Caution Buried
Electric Line Below
Red
6 in. x 1,000 ft.
42-251
Caution Buried Fiber
Optic Line Below
Orange
6 in. x 1,000 ft.
42-252
■ High-visibility safety yellow or red polyethylene construction
with bold black letters
■ Meets OSHA specifications Section 1010.144 for marking
physical hazards
Property
Method
Value
ASTM D88-75B
≥ 400%
Composition
IDEAL Specs.
LDPE
Tensile Strength
ASTM D882
2,350 PSI TD
1,893 PSI MD
Elongation
Legend
Color
Size
Thickness
Cat. No.
Caution
Yellow
3 in. x 1,000 ft.
4.0 Mils
42-001
Caution Do Not Enter
Yellow
3 in. x 1,000 ft.
4.0 Mils
42-002
Caution High Voltage
Yellow
3 in. x 1,000 ft.
4.0 Mils
42-003
Danger
Red
3 in. x 1,000 ft.
4.0 Mils
42-051
Danger High Voltage
277V/480V Keep Out
Red
3 in. x 1,000 ft.
4.0 Mils
42-052
Legend
Color
Size
Thickness
Cat. No.
Caution
Yellow
3 in. x 250 ft.
2.0 Mils
42-031
■ Formulated to resist degradation
from acid and alkali found in soils
Caution
Yellow
3 in. x 1,000 ft.
2.0 Mils
42-011
Caution Do Not Enter
Yellow
3 in. x 1,000 ft.
2.0 Mils
42-012
■ Lead-free pigments and organic lead-free ink
Danger
Red
3 in. x 1,000 ft.
2.0 Mils
42-015
Non-Detectable Underground Tapes
■ For protection, location and
identification of underground
utility installations
Property
Method
Value
Thickness
ASTMD2103
4.0 Mils
Elongation
ASTMD882-75B
500%
Composition
IDEAL Specs.
LDPE
ASTMD882
2,750 PSI
Tensile Strength
Recommended Burial Depth
3 in. Tape – 4 in. to 6 in.
6 in. Tape – less than 12 in.
Legend
Color
Size
Cat. No.
Caution Buried Electric
Line Below
Red
3 in. x 1,000 ft.
42-101
Caution Buried Electric
Line Below
Red
3 in. x 250 ft.
42-131
Caution Buried Electric
Line Below
Yellow
3 in. x 1,000 ft.
42-102
Caution Buried Telephone
Line Below
Orange
3 in. x 1,000 ft.
42-103
Caution Buried Fiber Optic
Line Below
Orange
3 in. x 1,000 ft.
42-104
Caution Buried Electric
Line Below
Red
6 in. x 1,000 ft.
42-151
Caution Buried Electric
Line Below
Yellow
6 in. x 1,000 ft.
42-152
D-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Basic Lockout/Tagout Kit
Starter Lockout/Tagout Kit
■ A great selection of the most popular lockout/tagout devices
■ A starter selection of the lockout/tagout devices every
electrician/maintenance person needs
■ Small nylon zipper pouch features belt loops and d-rings for
easy attachment to belts, tool pouches, tool carts and more
Lockout/Tagout Kits
Wire Management
■ Small nylon zipper pouch features belt loops and d-rings for
easy attachment to belts, tool pouches, tool carts and more
Description
Cat. No.
Basic Lockout/Tagout Kit
44-970
Description
Cat. No.
Qty.
Cat. No.
Starter Lockout/Tagout Kit
44-973
2
44-810
Kit 44-973 Includes:
Qty.
Cat. No.
44-809
Universal 277V Breaker/Single-Pole Lockout
1
44-809
1
44-783
Kit 44-970 Includes:
Hinged Single-Pole Breaker Lockout
Universal 277V Breaker Lockout/Single Pole
1
480/600V Breaker Lockout
1
44-807
Universal Multi-Pole Lockout
Wall Switch Lockout
1
44-789
3/4 in. Shackle Red Padlock
1
44-906
1
44-800
44-833
3/4 in. Red Padlock
1
44-906
1 in. Safety Lockout Hasp
1 in. Safety Lockout Hasp
1
44-800
Lockout Tags – Do Not Operate (striped)
2
44-833
110V Plug Lockout
1
44-818
Zipper Pouch
1
IA-3240
Lockout Tags – Do Not Operate (striped)
5
Universal Multi-Pole Breaker Lockout
1
44-783
110V Plug Lockout
1
44-818
Zipper Pouch
1
IA-3240
Quantities listed in kit description are for individual pieces, not carded packages.
Quantities listed in kit description are for individual pieces, not carded packages.
Personal Lockout Pouch Kit
■ Easy to carry, zippered pouch holds a worker’s personal padlocks and other small devices
Description
Cat. No.
Personal Lockout Pouch Kit
Kit 44-969 Includes:
44-969
Qty.
Cat. No.
1 in. Safety Lockout Hasp
1
44-800
Lockout Tags
12
44-833*
Red Safety Padlocks - Keyed Alike
3
44-916**
Personal Lockout Pouch
1
*Masterlock equivalent.
**Keyed alike and master keyed padlocks can be special ordered by contacting IDEAL Customer
Service.
1-800-435-0705 for Customer Service
www.idealindustries.com
D-19
Lockout/Tagout Kits
Standard Lockout/Tagout Kit
Plant Facility Lockout/Tagout Kit
■ Excellent selection of lockout/tagout devices, tags and locks
for maintenance workers or contractors
■ Ideal for plant facility personnel to keep all lockout/tagout
devices in one convenient place
■ Small nylon zipper pouch features belt loops and d-rings for
easy attachment to belts, tool pouches, tool carts and more
■ Polypropylene plastic tool box resists oil and chemicals
Description
Cat. No.
Description
Standard Lockout/Tagout Kit
44-971
Plant Facility Lockout/Tagout Kit
Cat. No.
44-972
Qty.
Cat. No.
Kit 44-972 Includes:
Hinged Single-Pole Breaker Lockout
3
44-810
Hinged Single-Pole Breaker Lockout
5
44-810
Universal 277V Breaker Lockout/Single Pole
2
44-809
Universal 277V Breaker/Single Pole Lockout
3
44-809
480/600V Breaker Lockout
1
44-807
480/600V Breaker Lockout
1
44-807
Wall Switch Lockout
1
44-789
Wall Switch Lockout
2
44-789
110V Small Plug Lockout
1
44-818
110V Plug Lockout
1
44-818
2 in. Shackle Red Padlocks
2
44-907
1 in. Safety Lockout Hasps
3
44-800
1 in. Safety Lockout Hasps
2
44-800
Red Labeled Lockout
1
44-791
5
44-830
220/550V Plug Lockout
1
44-819
Lockout Tags – Do Not Operate (striped)
5
44-833
Lockout Tags – Do Not Operate (striped)
10
44-849
Cleat for 277V Breaker Lockout
1
44-785
Fuse Blockout
1
44-815
Cleat for 480/600V Breaker Lockout
1
44-786
Fuse Blockout
1
44-816
Universal Multi-Pole Breaker Lockout
2
44-783
Gate Valve Lockout
1
44-824
Zipper Pouch
1
IA-3240
Cleat for 277V Breaker Lockout
1
44-785
Cleat for 480/600V Breaker Lockout
1
44-786
Universal Multi-Pole Breaker Lockout
3
44-783
Tool Box*
1
IA-3241
Kit 44-971 Includes:
Lockout Tags – Do Not Operate
Quantities listed in kit description are for individual pieces, not carded packages.
Group Lock Box
Qty.
Cat. No.
Quantities listed in kit description are for individual pieces, not carded packages.
*Tool box color may vary.
■ Helps ensure maximum security for
complex work team situations
■ Allows up to 13 individuals to
personally lock the closed box
■ Heavy-duty steel construction resists
unauthorized entry and job-site abuse
■ Compact 8-3/4 in. x 3-1/2 in. x 6 in. design
Description
Cat. No.
Group Lock Box
44-804
D-20
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Industrial Lockout/Tagout Kit
Lockout/Tagout Large Mouth Bag
■ Top opens completely
for easy access and
re-inforced to hold
itself open
■ Durable multi-ply
construction with
removable shoulder
strap
Description
Cat. No.
Lockout/Tagout Embroidered Bag - 16 in. long
44-980
Lock Stations
■ An industrial selection of lockout/tagout devices
■ Integrated, one-piece molded
construction eliminates loose
parts
■ Polypropylene plastic tool box resists oil and chemicals
Description
Cat. No.
Industrial Lockout/Tagout Kit
44-974
Kit 44-974 Includes:
■ Resilient polycarbonate
material provides twice the
heat resistance and
quadruple the impact
strength of typical
stations
Qty.
Cat. No.
Hinged Single-Pole Breaker Lockout
3
44-810
Universal 277V Breaker/Single Pole Lockout
2
44-809
480/600V Breaker Lockout
1
44-807
Wall Switch Lockout
1
44-789
110V Small Plug Lockout
1
44-818
Ball Valve Lockout
1
44-820
1 in. Safety Lockout Hasp
2
44-800
Red Labeled Lockout
1
44-791
220/550V Plug Lockout
1
44-819
Lockout Tags – Do Not Operate (striped)
10
44-849
Fuse Blockout
1
44-815
Fuse Blockout
1
44-816
Gate Valve Lockout
1
44-824
Description
Cat. No.
44-777
■ Reinforced snap-lock
clips provide easy
padlock and hasp
storage and removal
■ Exclusive translucent
cover protects
contents
• Lockable to prevent
loss of valuable safety
lockout padlocks. Recommend using a combination lock
for simple access control
• Innovative hinge holds cover open for easy product
selection
Cleat for 277V Breaker Lockout
1
44-785
Four-Lock Station (board only)
Cleat for 480/600V Breaker Lockout
1
44-786
44-778
Red Lockout Padlocks
4
44-916
Four-Lock Station Kit includes four red Safety Padlocks (44-916), 12
Heavy-Duty Lockout Tags and two 1 in. Safety Lockout Hasps (44-800)
Universal Multi-Pole Breaker Lockout
2
44-783
Ten-Lock Station (board only)
44-805
Tool Box*
1
IA-3241
Ten-Lock Station Kit includes ten red Safety Padlocks (44-916), 24
Heavy-Duty Lockout Tags and two 1 in. Safety Lockout Hasps (44-800)
44-806
Quantities listed in kit description are for individual pieces, not carded packages.
*Tool Box color may vary.
1-800-435-0705 for Customer Service
www.idealindustries.com
D-21
Lockout/Tagout Kits/Stations
■ Ideal for both storage and
portability of your
lockout/tagout needs
Industrial Lockout/Tagout Station
Description
Cat. No.
Industrial Lockout/Tagout Station – 16” H x 14” W x 6” D
44-975
Kit 44-975 Includes:
Lockout/Tagout
Qty.
Cat. No.
Hinged Single-Pole Breaker Lockout
2
44-810
Universal Single-Pole Breaker Lockout
2
44-809
Cleat for Universal Single-Pole Lockout
2
44-785
Universal Multi-Pole Breaker Lockout
2
44-783
480/600V Breaker Lockout
1
44-807
Cleat for 480/600V Breaker Lockout
1
44-786
Wall Switch Lockout
1
44-789
1 in. Safety Lockout Hasp
3
44-800
Red Safety Padlocks
4
44-916
■ Large Lockout/Tagout Station can be wall mounted or easily
transported
100V Small Plug Lockout
1
44-818
■ All metal, lockable cabinets come with two adjustable shelves
(extra shelves available)
220/550V Plug Lockout
1
44-819
Lockout Tags – Do Not Operate
10
44-833
Gate Valve Lockout - 1 in. to 2-1/2 in.
1
44-824
Gate Valve Lockout - 2-1/2 in. to 5 in.
1
44-825
Ball Valve Lockout
1
44-820
Pnuematic Lockout
1
44-774
Cabinet w/two shelves
1
IA-4989
Description
Qty.
Cat. No.
Extra shelf
1
IA-4990
■ Lockout safety tips are conveniently located inside of door for
frequent reminders of proper lockout procedures
Lockout/Tagout Training Programs and Compliance Manuals
Lockout/Tagout Video Training Program for Employee Safety and OSHA Compliance.
• 10-minute video effectively conveys the importance of Lockout/Tagout in the workplace.
• Demonstrates the seven steps to properly apply and five steps to re-energize from
Lockout/Tagout
• Provides instructions for maintaining Lockout/Tagout during shift changes
• Shows how to apply, remove and maintain lockout devices
• Also suitable for employee-refresher training sessions
• Includes video, ten Lockout/Tagout Procedure Employee Reference Cards, instructor’s
guide and employee quiz
• Additional Employee Reference Cards also available (44-954)
Compliance Manual to assist your facility in complying with
Federal Lockout/Tagout Regulations
1 – Reviews the OSHA Standard in understandable, everyday language
2 – Provides a step-by-step program to help you develop your
“Lockout/Tagout” Compliance Program
3 – Outlines the type of information required for employee training
The Real, Real Life Lockout/Tagout Training Video
1 – Information you and your employees need to assist you in complying with OSHA’s Lockout/
Tagout Standards presented in an easy to understand and entertaining format
2 – This video comes in a plastic storage case and includes a leaders guide, training
handbook with quiz, and wallet card reminder of the six steps to “Lock It and Tag It.”
Description
Cat. No.
Lockout/Tagout Video Training Program
44-942
Lockout/Tagout Video Training Program Reference Cards
44-954
Lockout/Tagout Compliance Manual
44-940
Real, Real Life Lockout/Tagout Training Video
44-941
Real, Real Life Lockout/Tagout Handbooks, 10/pack
44-953
D-22
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Oversized Circuit Breaker Lockout System
Article 430.102(B) Motor
2002 NEC.
■ Unique Lockout system for oversized 480/600V Circuit Breakers
■ System can be permanently installed into an electrical panel
putting all lockout items at the point of need
■ Easy installation of adhesive mounting rails – no tools required
■ Pegs in mounting rails mate with holes in locking arms for
security of arm when lock is in place
■ Red arms lock off, green arms lock on
Large Breaker Lockout
Description
Oversized Circuit Breaker System –
480-600 Volt
Qty.
Cat. No.
1
44-822
480/600V Single/Multi-Pole Breaker
Lockout
■ Designed to lockout
large 480/600V breaker
switches up to 2-1/2 in.
wide and 7/8 in. thick
■ Easy to install — no tools
required
Description
Large Breaker Lockout
Qty.
Cat. No.
1
44-823
Multi-Pole Breaker Lockout
■ Use thumbscrew to clamp lockout securely on to switch tongue,
then pull cover over thumbscrew and lock in place to prevent
clamp from being loosened
■ New blade design provides tighter grip with less torque on
thumbscrew
Description
Qty.
Cat. No.
480/600V Single/Multi-Pole Breaker Lockout
1
44-807
480/600V Single/Multi-Pole Breaker Lockout
50
44-1807
Cleat for 480/600V Single/Multi-Pole Lockout
1
44-786
■ Works with most major multi-pole breakers with tie-bar type switches
including GE, ITE Sylvania, Challenger, Bryant, Westinghouse, Square
D (2/3 poles) and General Switch Co.
■ Easy to install — thumbscrew secures and locks tie bar in place;
no cable ties or tools required
■ Please see breaker guide for your application
Description
Multi-Pole Breaker Lockout
1-800-435-0705 for Customer Service
Qty.
Cat. No.
1
44-783
www.idealindustries.com
D-23
Lockout/Tagout
To comply with:
“The provisions for locking or
adding a lock to the
disconnecting means shall be
permanently installed on or at
the switch or circuit breaker
used as the disconnecting
means.”
Lockout/Tagout
Universal 120/277V Breaker Lockout
Hinged Single-Pole Breaker Lockout
■ Use thumbscrew to clamp lockout securely on to switch
tongue, then pull cover over thumbscrew and lock in place to
prevent clamp from being loosened
■ Hinged single-pole lockout with locking post design, locks
lever in off position to isolate and prevent breaker use
■ New blade design provides tighter grip with less torque on
thumbscrew
■ Ideal for applications where panel closure is preferred
■ Please see breaker guide for your application
Qty.
Cat. No.
Description
Single-Pole Breaker Lockout
3
44-809
Hinged Single-Pole Breaker Lockout
3
44-810
Cleat for Single-Pole Breaker Lockout
3
44-785
Hinged Single-Pole Breaker Lockout
100
44-1810
Single-Pole Breaker Lockout
50
44-1809
Description
Qty.
Cat. No.
Miniature Circuit Breaker Lockouts
Pins Out Standard
Pins In Standard
■ A safe and effective method for locking out miniature circuit
breakers, commonly used in European and Asian equipment
■ Miniature Breaker Lockouts require NO TOOLS to install! The
Lockout easily installs with the aid of a push button. The Tie
Bar Style Lockout has a convenient thumb wheel for quick
application.
■ Recommended to lock with lightweight Xenoy padlocks (see
page D-39) or other padlocks, the lockouts can take padlocks
with a shackle diameter up to 9/32”.
■ Material: Glass-filled nylon
Pins Out Wide
Tie Bar
Description
D-24
www.idealindustries.com
Qty.
Cat. No.
Pins Out Standard
1
44-779
Pins In Standard
1
44-780
Pins Out Wide
1
44-784
Tie Bar
1
44-787
1-800-435-0705 for Customer Service
Wire Management
Circuit Breaker Lockout System
■ Covers most 120V - 277V breakers!
How the System Works
■ Makes use of unique lock rail system,
providing the following benefits:
- Allows panel door to be closed even
when lockouts are in place
- Accommodates multiple locks,
facilitating group lockout activity
without hasps
- Keeps weight off the breakers,
protecting delicate electrical
components from damage
- Positions locks and tags outside the
panel, making sure lockout activity is
clearly visible to anyone in the area
Lockout device is unlocked
by inserting and turning the
red plastic key
1. Peel liner off bottom of the
lock rail, exposing superbond adhesive. Permanently
affix to any location on the
panel. No drilling required.
2. Attach the lockout device
to the breaker and snap
into locked position.
3. Pass plastic key through
lock rail and attach lock,
preventing key from sliding
down cable and opening
lockout device.
4. For group lockouts, run
key through multiple loops
in lock rail and apply
locks. No hasps required!
5. Low-profile lockouts allow
panel doors to be closed
on most breaker panels.
Technical Information
• Lockout devices constructed of
high-impact Isoplast polymers
• Cables are 2 ft. in length
• Lock rails made of durable isoplast
polymers with acrylic adhesive
backing
Snap-on
Clamp-on
For use on Square D
NQO and other breakers
that have a hole in the
switch tongue. Just align
pins with hole and snap
closed. Pins prevent
switch from being
thrown.
For use on breakers that do not have a
hole in the switch tongue, including
multiple breakers with tie bars. Turn
thumb-screw to clamp lockout securely
onto switch, then snap the cover closed to
prevent thumbwheel from being loosened.
“No Shackle” Locks
Especially useful when lockout
devices will be kept at the panel in
accordance with NEC regulations.
Everything you need to lockout
breakers is kept conveniently right
at the point of need!
Description
Outer Dimensions (in.)
A
B
C
Snap-On
0.90
1.88
0.74
0.40
0.35
Clamp-On
0.95
2.56
0.74
0.35
0.42
Description:
“The provisions for locking or adding a lock to the
disconnecting means shall be permanently installed on or at
the switch or circuit breaker used as the disconnecting means.”
NEC 2002, Article 430.102(B) Motor
1-800-435-0705 for Customer Service
Switch Clearance (in.)
D
E
Qty.
Cat. No.
Snap-on lockout for Square D NQO and other
breakers with a hole in the switch tongue
1
44-768
Clamp-on lockout for breakers without hole in the switch
tongue, including multi-pole breakers with tie bars
1
44-764
4 in. Lock Rail with seven lock loops
1
44-769
No shackle lock
1
444.001
www.idealindustries.com
D-25
Lockout/Tagout
■ Works on wide range of breakers,
including single- and multi-pole
configurations
Lockout/Tagout
Circuit
Breaker
Mfg.
Breaker
Type
# of
Poles
Airpax
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
Allen Bradley
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
Airpax
1492-CB1F
1492-CB2F
1492-CB3F
1492-CB1G
1492-CB2G
1492-CB3G
1492-CB1H
1492-CB2H
1492-CB3H
1492-CB1DF
1492-CB1DG
1492-CB1DH
1492-CB2DF
1492-CB2DG
1492-CB2DH
JS
S1
S3
F362
F364
F374
E221
E222
E241
E271
E242
E272
E243
E273
E244
E274
S201-B
S202-B
S203-B
S204-B
S201-C
S202-C
S203-C
S204-C
S201-D
S202-D
S203-D
S201-K
S202-K
S203-K
S204-K
S201P-K
S202P-K
S203P-K
S222-K
S221
S222
S223
S224
S251
S252
S253
S261-B
S262-B
S263-B
S264-B
S261-C
1
1
2
3
1
2
3
1
2
3
1
1
1
2
2
2
2-3
3
3
2
4
4
1
2
1
1
2
2
3
3
4
4
1
2
3
4
1
2
3
4
1
2
3
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
1
2
3
4
1
*Use with cleat #44-785
D-26
120V
Snap On
(w/hole)
44-810
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
**Use with cleat #44-786
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Breaker
Type
# of
Poles
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
S262-C
S263-C
S264-C
S261-D
S262-D
S263-D
S271-K
S272-K
S273-K
S274-K
S281-K
S282-K
S283-K
S281UC-K
S282UC-K
S283UC-K
S201P-Z
S202P-Z
S203P-Z
S201U-K
S202U-K
S203U-K
S204U-K
S201UP-K
S202UP-K
S203UP-K
S204UP-K
S201U-Z
S202U-Z
S203U-Z
S204U-Z
S201UP-Z
S202UP-Z
S203UP-Z
S204UP-Z
F202AC
F672
F204AC
F674
S281-Z
S282-Z
S283-Z
S281UC-Z
S282UC-Z
S283UC-Z
S501-B
S502-B
S503-B
S501-C
S502-C
S503-C
S501-D
S502-D
S503-D
S501-K
S502-K
S503-K
S501UC-B
S502UC-B
S503UC-B
S504UC-B
S501UC-K
S502UC-K
2
3
4
1
2
3
1
2
3
4
1
2
3
1
2
3
1
2
3
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
2
2
4
4
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
4
1
2
1-800-435-0705 for Customer Service
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Lockout/Tagout
Circuit
Breaker
Mfg.
120V
Snap On
(w/hole)
44-810
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
www.idealindustries.com
D-27
Circuit
Breaker
Mfg.
Breaker
Type
# of
Poles
120V
Snap On
(w/hole)
44-810
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Lockout/Tagout
ABB
S503UC-K
ABB
S504UC-K
American Ckt. Bkr.
NEF
American Ckt. Bkr.
NJJ
AEG
E82S
American Switch
C
Bryant
BR
Bryant
BR
Buschmat
S46
Challenger
C
Challenger
C
Challenger
CDK
Challenger
LM
Challenger
NEJ
Clipsal
4CB
Crouse Hinds
MP
Cutler Hammer
BA
Cutler-Hammer
BAB
Cutler-Hammer
BAB
Cutler-Hammer
BD
Cutler-Hammer
BR
Cutler-Hammer
BR
Cutler-Hammer
BRH
Cutler-Hammer
BRH
Cutler-Hammer
BRHH
Cutler-Hammer
CC
Cutler-Hammer
CH
Cutler-Hammer
CH
Cutler-Hammer
CHH
Cutler-Hammer
CH2
Cutler-Hammer
CHB
Cutler-Hammer
CHB
Cutler-Hammer
CHKD
Cutler-Hammer
CHLD
Cutler-Hammer
CHMDL
Cutler-Hammer
CHND
Cutler-Hammer
CHP
Cutler-Hammer
CHP
Cutler-Hammer
CHQ
Cutler-Hammer
CHQ
Cutler-Hammer
CHSW
Cutler-Hammer
CKD
Cutler-Hammer
CL
Cutler-Hammer
CL
Cutler-Hammer
CLD
Cutler-Hammer
CLDC
Cutler-Hammer
CMDL
Cutler-Hammer
CND
Cutler-Hammer
CNDC
Cutler-Hammer
CSR
Cutler-Hammer
DK
Cutler-Hammer
E125B
Cutler-Hammer
E125E
Cutler-Hammer
E125H
Cutler-Hammer
E125S
Cutler-Hammer
ED
Cutler-Hammer
EDC
Cutler-Hammer
EDH
Cutler-Hammer
EFH
Cutler-Hammer
EGB
Cutler-Hammer
EGE
Cutler-Hammer
EGS
Cutler-Hammer
EHC
3
4
3
3
2
1
1
2-3
1
1
2-3
2-3
1
1-2
1-3
2
1
1
2-3
1
1
2-3
1
2-3
2
3
1
2-3
3
4
1
2-3
2-3
2-4
2-3
2-4
1
2-3
1
2
2-3
2-3
1
2
2-4
2-4
2-3
2-4
2-4
1
2-3
1-4
1-4
1-4
1-4
2-4
2-4
2-4
1-4
1-4
1-4
1-4
1-4
*Use with cleat #44-785
**Use with cleat #44-786
D-28
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X*
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X
X
X
X
X*
X
X
X
X
X
X
X
X
X
X
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
www.idealindustries.com
X
X
X
X
X
X
X
X
X**
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1-800-435-0705 for Customer Service
Wire Management
Breaker
Type
# of
Poles
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
EHD
FB
FC
FD
FDB
FDC
FS
GB
GC
GD
GDB
GHB
GHBGFEP
GHC
GHCGFEP
HBAW
HBAW
HBAX
HBAX
HFD
HGHB
HGHC
HJD
HKD
HLD
HMCP
HMDL
HMDLB
HMPL
HND
HQP
HQP
JD
JDB
JDC
KD
KDB
KDC
LA
LD
LDB
LDC
LH
LHB
LJ
MA
MC
MD
MDL
MDS
NB
ND
NDC
OPTIM
PB
QBGF
QBGF
QBGFEP
QBGFEP
QBHGF
QBHGFEP
QBHW
QBHW
1-4
2-3
1-4
1-4
2-4
2-4
2-3
1-3
1-3
1-3
1-3
1-3
1
1-3
1
1
2-3
1
2-3
1-4
1
1
2-4
2-4
2-4
2-3
2-3
2-3
3
2-4
1
2
2-4
2-3
2-4
2-4
2-4
2-4
2-3
2-4
2-3
2-4
3
3
3
2-3
2-3
2-3
2-3
2-3
2-3
2-4
2-4
3
2-3
1
2
1
2
1
1
1
2-3
*Use with cleat #44-785
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Lockout/Tagout
Circuit
Breaker
Mfg.
120V
Snap On
(w/hole)
44-810
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X**
X
X
X
X
X**
X**
X**
X
X
X
X
X
X
X
X
X
X
X
**Use with cleat #44-786
1-800-435-0705 for Customer Service
www.idealindustries.com
D-29
Lockout/Tagout
Circuit
Breaker
Mfg.
Breaker
Type
# of
Poles
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
Cutler-Hammer
E-T-A
E-T-A
FAZ
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Fed. Pacific Elec.
Frank Adams
FUJI Electric
FUJI Electric
FUJI Electric
FUJI Electric
FUJI Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
QC
QC
QCD
QCD
QCGF
QCGFEP
QCHGF
QCHGFEP
QCHW
QCHW
QHCW
QHCW
QHCX
QHCX
QHPW
QHPW
QHPX
QHPX
QPGF
QPGF
QPGFEP
QPGFEP
QPHGF
QPHGFEP
QPHW
QPHW
WME
WMF
WMH
WMM
WMN
WMS
911220G
911225
C16
2B
BAB
NA-single
NA-tie bar
NB
NBH GFI
NE/NEF
NEJ
NFJ
NJJ
NJL
NM
NP-single
P
EA53B
EA203B
BU-ESB
BU-ESA
BU-FSB
V
EH400
HQC
SED
SEH
SEL
SEP
SFH
SFL
1
2-3
1
2-3
1
1
1
1
1
2-3
1
2-3
1
2-3
1
2-3
1
2-3
1
2
1
2
1
1
1
2-3
1-3
1-3
1-4
1-4
1-4
1-4
2
1
1-4
2
1
3
2
1
1
1-3
1-3
1-3
1-3
1-3
1-3
1
1
3
3
3
3
3
1-3
3
3
2-3
2-3
2-3
2-3
2-3
2-3
*Use with cleat #44-785
D-30
120V
Snap On
(w/hole)
44-810
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
X
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X*
X
X*
X*
X
X
X
X
X
X
X
X
X
X
X
X*
X*
X*
X*
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
**Use with cleat #44-786
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Breaker
Type
# of
Poles
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
General Electric
SFP
SGD
SGH
SGL
SGLA
SGP
SRPG
TB
TBC
TE
TEB
TED
TEF
TEL
TEML
TEY
TF
TFC
TFJ
TFK
TFL
THED
THEF
THFK
THHQB
THHQB-A
THHQB-S
THHQC
THHQC-A
THHQC-S
THHQL
THHQL-A
THHQL-S
THJK4
THJK6
THKM12
THKM8
THLC1
THQB
THQB GF
THQB-A
THQB-S
THQC
THQC-A
THQC-AL
THQC-S
THQD
THQDBL
THQL
THQL-A
THQL-S
TJ2
TJ4
TJC
TJD
TJJ
TJK
TJS
TK4V
TKC
TKM
TKMA8
TQB
2-3
2-3
2-3
2-3
2-3
2-3
3
2
2
1-3
1-3
1-3
1-3
3
3
1-3
1-3
3
2-3
2-3
3
1-3
1-3
2-3
2-3
1
1
1-3
1
1
2-3
1
1
2-3
2-3
2-3
2-3
3
2-3
1-2
1
1
2-3
1
2-3
1
2-3
3
2-3
1
1
2-3
3
2-3
2-3
2-3
2-3
2-3
3
3
2-3
3
2-3
*Use with cleat #44-785
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
X
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X*
X*
X*
X*
X*
X*
X*
X*
X
X
X*
Lockout/Tagout
Circuit
Breaker
Mfg.
120V
Snap On
(w/hole)
44-810
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X**
X
X
X*
X
X
X
X
X
X
X
X
X
X*
X
X
X
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X**
X**
X**
X**
X
X*
X
X
X
X
X
**Use with cleat #44-786
1-800-435-0705 for Customer Service
www.idealindustries.com
D-31
Circuit
Breaker
Mfg.
Breaker
Type
Lockout/Tagout
General Electric
TQB-A
General Electric
TQB-S
General Electric
TQC
General Electric
TQC-A
General Electric
TQC-S
General Electric
TQD
General Electric
TQL
General Electric
TQL
General Electric
TQL-A
General Electric
TQL-S
General Electric
V
GE Vynckier
Series E
GE Vynckier
Series G
Hager
453717
Hager
MW216A
Hager
MW620A
Heinemann
LB
Heinemann
LF
Heinemann
LJ
Kapp
LS68
Legrand
04302
Legrand
06469
Legrand
01908
Legrand
01935
Legrand
01980
Lemag
SD62
Merlin Gerin
B100A
Merlin Gerin
C32N
Merlin Gerin
C45AD
Merlin Gerin
C60a
Merlin Gerin
C60H
Merlin Gerin
C60N
Merlin Gerin
C80A
Merlin Gerin
NC100H
Merlin Gerin
NC125H
Merlin Gerin
NC100L
Merlin Gerin
NC100LH
Merlin Gerin
NC100L MA
Merlin Gerin
NC100N
Merlin Gerin
C801N
Merlin Gerin
C1251N
Merlin Gerin
CE104N
Merlin Gerin
CK1200NA
Merlin Gerin
CJ
Proteus
BSEN60947-3
Proteus
AC22BS5419
Proteus
C16
Proteus
C6
Siemans ITE
5SX11
Siemans ITE
5SX12
Siemans ITE
5SX13
Siemans ITE
5SX21
Siemans ITE
5SQ11
Siemans ITE
5SQ12
Siemans ITE
5SQ13
Siemans ITE
5SQ16
Siemans ITE
5SN22
Siemans ITE
BL
Siemans ITE
BL
Siemans ITE
BLF-GFI
Siemans ITE
BLH
Siemans ITE
BLH
Siemans ITE
BQ
*Use with cleat #44-785
D-32
# of
Poles
1
1
2-3
1
1
2-3
1-3
2-3
1
1
1-4
1-4
1-3
3
2
4
1
1
1
1
2
3
1
2
3-4
1
2
1-3
3
1-4
1-4
1-4
3
1-3
1-3
1-4
1-4
3
1-4
3
3
3
3
3
2
2
1
1-3
1
2
3
1
1
2
3
4
2
1
2-3
2
1
2-3
1
120V
Snap On
(w/hole)
44-810
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
X
X
X
X
X
X
X
X
X
X
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X*
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
**Use with cleat #44-786
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Breaker
Type
# of
Poles
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
BQ
BQCH
BQD
BQH
BQH
CED6
CFD6
CFD6-ETI
CJ3
CJD6
CJD6-ETI
CLF
CMD6
CMD6-ETI
CND6
CPD6
CQD
E2
E4
ED
ED4
ED6
ED6-ETI
EE3
EH3
EQP
EQT QF
ET
FD6A
FJ2-B
FJ3
FJ6
FXD6A
FXD6-ETI
GF
HBL
HBL
HBQ
HBQ
HE4
HED4
HED6
HFD6
HFXD6
HHED6
HHFD6
HHJD6
HHJXD6
HJD6
HJXD6
HMD6
HMXD6
HN3
HND6
HNXD6
HPD6
HPXD6
HQJ2-H
HQP
HQP
HQPP
HQPP
HQPPH
2-3
1-3
1-3
1
2-3
2-3
2-3
2-3
*Use with cleat #44-785
2-3
2-3
2
3
3
3
3
1-3
1-3
1-3
1-3
1-3
1-3
3
3
3
4
3
3
2-3
2-3
2
2
2-3
2-3
1
1
2-3
1
2-3
1-3
1-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2
2-3
2-3
3
3
3
1
2-3
1
2-3
2
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
X
X
X
X
X
X
X
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X**
X**
X
X
X
X
Lockout/Tagout
Circuit
Breaker
Mfg.
120V
Snap On
(w/hole)
44-810
X
X
X
X
X*
X
X
X
X
X
X
X*
X*
X
X*
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X**
X
X**
X**
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X**
X
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
**Use with cleat #44-786
1-800-435-0705 for Customer Service
www.idealindustries.com
D-33
Lockout/Tagout
Circuit
Breaker
Mfg.
Breaker
Type
# of
Poles
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Siemans ITE
Simplex
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
Square D
HRD6
HRXD6
JD2
JD6-A
JJ3
JJ6
JL3
JXD2-A
JXD6-A
KM3
LL3
LL6
LXD6-ETI
MD6
MXD6
MXD6-ETI
ND6
NH3-F800
NXD6
PD6
PXD6
QJ2
QJ2-H
QJH2
QP
QP
QP1
QPH
QPH
QPP
QPP
QPPH
QPPH
RD6
RXD6
SCMD6
SCND6
SHLD6-A
SHMD6
SHND6
SMD6
SND6
SHPD6
SPD6
3VF3
NX
EDB
EGB
EH4
EHB
EHB
EJB
EZ
FA
FAL
FC
FCL
FDA
FGA
FH
FHL
FHL-DC
FHP
3
3
3
2-3
*Use with cleat #44-785
D-34
120V
Snap On
(w/hole)
44-810
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
3
3
2-3
2-3
3
3
3
3
2-3
2-3
2-3
2-3
2-3
3
3
2-3
2-3
2-3
1
2-3
1
1
2-4
1
2-3
1
2-3
3
3
3
3
3
3
3
3
3
3
3
3
3
1-3
1-3
1-3
1-3
2-3
1-3
3
1-3
1-3
3
2-3
Circuit Breaker LO Sys.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X*
X*
X
X
X
X
X
X
X
X
X
X
X
3
1-3
1-3
3
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X*
X*
X*
X
X
X
X*
X*
X*
X*
**Use with cleat #44-786
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Breaker
Type
Square D
FI
Square D
FIL
Square D
FY
Square D
GJL
Square D
KA
Square D
KAL
Square D
KAP
Square D
KC
Square D
KCL
Square D
KH
Square D
KHL
Square D
KI
Square D
KIL
Square D
LA
Square D
LAL
Square D
LAP
Square D
LC
Square D
LCP
Square D
LH
Square D
LHL
Square D
LHP
Square D
L2
Square D
LXL
Square D
MA
Square D
MA
Square D
MAL
Square D
MH
Square D
MH
Square D
MHL
Square D
ML-1
Square D
ML-3
Square D
MXL
Square D
Q1B
Square D
Q1L
Square D
Q2
Square D
Q2H
Square D
Q2L
Square D
Q2MT
Square D
Q4
Square D
Q4L
Square D
QO
Square D
QO
Square D
QOB
Square D
QOB
Square D
QOB-H
Square D
QOB-VH
Square D
QOB-VH
Square D
QO-H
Square D
QOM1-VH
Square D
QOM2-VH
Square D
QO-SWN
Square D
QOU
Square D
QOU
Square D
QOU w/tie bar
Square D
QO-VH
Square D
QO-VH
Square D
QYU
Square D
Y1
Sursum
EA53
Sylvania GTE
QC
Sylvania GTE
Type C
Thomas & Betts
F Frame
Toshiba
E225B
*Use with cleat #44-785
# of
Poles
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
3
3
1
3
2-3
2-3
X*
X*
X*
X*
X*
X*
2-3
2-3
2-3
3
2-3
2-3
2-3
2-3
3
3
3
2-3
3
X*
X*
X*
X*
X*
X*
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
3
3
2-3
3
3
2-3
2-3
2-3
3
3
3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
2-3
1
2-3
1
2-3
2
1
2-3
2
2
2
2-3
1
2-3
2-3
1
2-3
1
X**
X**
X**
X**
X**
X**
Lockout/Tagout
Circuit
Breaker
Mfg.
120V
Snap On
(w/hole)
44-810
X
X
X
X
X
X
X
X
X**
X
X
X
X**
X
X**
X
X
X
X
X*
X*
X*
X*
X
X
X**
X**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3
2
2
1-3
3
X
X
X
X
X*
X
X
X
**Use with cleat #44-786
1-800-435-0705 for Customer Service
www.idealindustries.com
D-35
Lockout/Tagout
Circuit
Breaker
Mfg.
Breaker
Type
# of
Poles
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
Westinghouse
BA w/tie bar
BA
BAB
BR
BR w/tie bar
BRH w/tie bar
CA
DA
DK
EB
ED
EH
EHB
EHD
FA
FB
FD
FDB
FDC
FP
GB
GBH
GHB
GR
HBAW
HBAX
HCA
HFB
HFD
HKD
HLA
HLB
HMC
HMCP
HNC
HQNP
HQP
JA
JB
JD
JDB
KA
KB
LA
LB
LBB
LH
MA
MC
MCC
MCPO
NB
P
PA
QBHW
QC
QC
QCHQ
QHCW
QHCX
QHPW
QPHW
Quicklag P
2-3
1-3
1-3
1-3
2-3
2-3
*Use with cleat #44-785
D-36
120V
Snap On
(w/hole)
44-810
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X
1-3
1-3
1-3
1-3
3
2-3
1-4
2-4
2-4
3
1-3
1-3
1-3
3
1
1
3
1-3
1-4
3
X*
X
X
X*
X
X*
X*
X
X
X
X
X
X
X
X
X
X
X
X
X**
X
X
X
X
X
X
X
X
X
X
X
X*
X*
X
X
X
X
X
X
X
X
X
X
X*
X
X
3
1
X
X
X
X
X
X
X
X
X
X**
X
X**
X
X
X
X**
X**
X**
3
2-4
3
3
3
3
2-3
2-3
2-3
3
X*
X
X
3
3
1
1
3
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
**Use with cleat #44-786
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Breaker
Type
# of
Poles
Westinghouse
Westinghouse
Westinghouse
Wylex
Zinsco
Zinsco
Zinsco
Zinsco
Zinsco
RE
RH
WPHX
WRS40/2
HQB
QB
QCB w/Tie Bar
Type Q
Type T
3
1
2
3
1
2
1
1
Standard Breaker Lockouts
120/277V
480/600V
Clamp On Clamp On
Oversize
(no hole)
(no hole)
480/600V
44-809
44-807
44-823
Circuit Breaker LO Sys.
Multi-Pole
(tie bar)
44-783
Snap On
(SQD QO)
44-768
Clamp On
(Universal)
44-764
X
Mini Circuit Breaker Lockouts
Pin Out
Standard
44-779
Pin In
Standard
44-780
Pin Out
Wide
44-784
Multi-Pole
w/Tie Bar
44-787
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Wall Switch Lockouts
Plug Lockouts
■ Our patent pending
universal Wall Switch
Lockout locks out both
toggle and decora wall
switches
■ Accommodate a variety of
electrical plug and cord
sizes to prevent accidental
connection or disconnection
■ Durable plastic body resists
wear, chemicals and job-site
abuse
■ The universal design
assures switch is locked
on or off. It also hinges
open for unobstructed
normal switch operation
■ Accommodates cable ties or
padlocks (with up to 3/8 in.
shackles)
■ The standard wall switch
lockout fits most wallmounted single or threeway electrical switches
Description
Plug Lockouts – 110V
Plug Lockouts – 220/550V
Description
Lockout/Tagout
Circuit
Breaker
Mfg.
120V
Snap On
(w/hole)
44-810
Qty./Card
Cat. No.
Universal Wall Switch Lockout
1
44-772
Standard Wall Switch Lockout (not shown)
1
44-789
Size
Cat. No.
2 in. x 2 in. x 3-1/2 in.
44-818
3-1/4 in. x 3-1/4 in. x 7 in.
44-819
Electric Plug Lockout
Fuse Blockout and Lockout Devices
■ Slides over cord prongs and
locks in place to prevent cord
from being plugged into an
outlet
■ Fuse lockout snaps
easily into place and
can be cable tied for
added security
■ Cannot be removed without
key
■ Fits most Buss and
Gould fuse blocks
■ Works on any 2- or 3-prong
plug
Description
Electric Plug Lockout
1-800-435-0705 for Customer Service
Cat. No.
Description
44-782
1/4, 9/32 and 9/16 in. Fuse Lockout
Qty./Card
Cat. No.
2
44-815
www.idealindustries.com
D-37
Adjustable Cable Lockout
Gate Valve Lockouts
■ Infinitely adjustable safety hasp and cable
■ Unique patent pending rotating
design allows for easier
installation in confined space
applications
■ Ideal for multiple circuit breaker panels
and side-by-side gate valve lockouts
■ Feed the cable end through the points to
be locked out, then back through the
lockout body. Cinch it tight to remove any
slack with the patented locking feature
■ Each size rotates into itself and
nests within the next larger
size to save space in storage
Lockout/Tagout
■ Tough, flexible multi-stranded 6 ft. 1/4” dia. steel cable is insulated
with a clear vinyl coating
■ Tough, lightweight, dielectric Xenoy®
thermoplastic body withstands chemicals;
performs effectively in extreme conditions
■ Up to four workers can apply their personal
safety locks
Adjustable Cable Lockout
■ Complete with high-visibility
permanent safety labels
(English, French & Spanish)
that can be written on to identify
the responsible person, then erased for the next job
■ Tough, lightweight, dielectric Xenoy thermoplastic bodies withstand
chemicals and perform effectively in extreme conditions, temperature
range: -50°F (-46°C) to +350°F (177°C)
■ Complete with high-visibility, re-usable,
write-on safety labels (English, French &
Spanish). Identify the responsible person,
then erase for the next job.
Description
■ Up to four workers can apply
their personal safety locks
Valve Size
Qty.
Cat. No.
1 in. to 3 in.
1
44-824
Cat. No.
2 in. to 5 in.
1
44-825
44-808
Set of five sizes (1 in. to 13 in.)
—
44-817
Cable Lockout
Ball Valve Lockout Devices
■ 44-829 Unique hasp lockout
device accepts up to six 9/32 in.
padlocks and comes with a 6 ft.
plastic-coated steel cable
■ Best available
method for locking
out ball valves
■ Patented design
fits most major
brand ball valves
■ Designed to lock
in off position only
Description
Cat. No.
Cable Lockout, 6 ft. cable
44-829
■ Complies with
OSHA lockout
standard
Valve Size (In.)
1/2 to 1-1/4
1-1/4 to 3
D-38
www.idealindustries.com
Max.
Shackle Length
Material
Cat. No.
—
Polypropylene
44-846
—
Polypropylene
44-847
1/4 to 1 (not shown)
9/32
Nylon
44-820
1-1/4 to 3 (not shown)
9/32
Heavy steel
44-821
1-800-435-0705 for Customer Service
Wire Management
Aluminum Safety Lockout Padlocks
Xenoy Safety Lockout
Padlocks w/Key Retention
■ Dedicated safety lockout
device reduces confusion
with other locks
■ Complies with OSHA’s
“1-key, 1-lock”
■ High visibility, baked-on powder coated finish stays bright
■ Ideal for corrosive and tough environments
Lockout/Tagout
■ Non-conductive,
lightweight Xenoy® body
■ Key retention ensures keys do
not get lost while not in use and
that padlocks are not left untouched
■ 1-1/2 in. shackle clearance
■ 1-1/16 in. shackle clearance
■ 1-1/2 in. wide lock with 1/4 in. shackle
■ 1-9/16 in. wide lock with 1/4 in. shakle clearance
■ Four colors for easy identification
■ Hardened shackles for superior resistance to cutting
■ Keyed alike, master-keyed, additional colors and engraving available
by special order
■ Keyed alike, Master-Keyed, 2nd key, additional colors and
engraving available by special order
Bumper Color
Cat. No.
Bumper Color
Cat. No.
Blue
44-912
Blue
44-920
Black
44-914
Black
44-921
Red
44-916
Red
44-922
Yellow
44-918
Yellow
44-923
Steel Padlocks
Lock Labels
■ Rustproofed, steel case with nickel-plated
shackle withstands abuse and
environmental hazards
■ Includes two keys
■ 1-1/2 in. wide lock with 9/32 in.
shackle diameter
■ Keyed-alike and Master-Keyed
locks available by special order
■ Easy identification of employees’ locks
■ Write-on, vinyl labels with peel-off adhesive backing
■ Polyester over laminate protects label
Bumper Color
3/4 In. Shackle Clearance
Cat. No.
2 In. Shackle Clearance
Cat. No.
Blue
44-900
44-901
Black*
44-902
44-903
White*
44-904
44-905
Red
44-906
44-907
Green*
44-908
44-909
Yellow*
44-910
44-911
*Special order thru Customer Service.
Description
Qty.
Cat. No.
Lock Labels
8 labels
44-898
Marking Pens
■ Fast-drying, permanent ink
will not smear
■ Use on write-on marker cards
and write-on cable-tie
marker plates
■ Color-coded in red or black
1-800-435-0705 for Customer Service
Description
Cat. No.
Marking Pen w/black ink
41-697
Marking Pen w/red ink
41-698
www.idealindustries.com
D-39
Heavy-Duty Lockout Tags
Bilingual Lockout Tags
Lockout/Tagout
■ Spanish/English tags provide extra safety and information
in bilingual situations
■ High-visibility lettering
■ High-visibility lettering
■ Laminated plastic tags have non-fade legends, resist corrosive
and harsh environmental conditions and a 7/8 in. grommet
■ Vinyl tags are silk screened with a metal grommet; fastener
included
■ Exceeds OSHA’s 50-lb. pullout requirement
Legend
Type
■ Laminated plastic tags with non-fade legends resist corrosive
and harsh environmental conditions
■ Write-on tag with 7/8 in. grommet can be padlocked to device
to help prevent unauthorized removal
Legend
Qty.
Cat.No.
Do Not Operate
Heavy-Duty Laminated
Card of 5
44-830
Do Not Operate
Heavy-Duty Laminated Box of 100
44-1830
Do Not Operate
Economy Vinyl
Bag of 25
44-848
Do Not Operate –
Maintenance Department
Heavy-Duty Laminated
Card of 5
44-831
Do Not Operate –
Maintenance Department
Economy Vinyl
Bag of 25
44-844
Do Not Operate –
Electricians at Work
Heavy-Duty Laminated
Card of 5
44-832
Do Not Operate –
Electricians at Work
Economy Vinyl
Bag of 25
44-843
Do Not Operate –
(red striped background)
Heavy-Duty Laminated
Card of 5
44-833
Do Not Operate –
(red striped background)
Heavy-Duty Laminated Box of 100
44-1833
Do Not Operate –
(red striped background)
Economy Vinyl
Bag of 25
44-849
Do Not Operate
(Photo ID - Self Sealant)
Heavy-Duty Laminated
Card of 5
44-834
Do Not Operate (striped)
Qty./Card
Cat. No.
5
44-841
Safety Lockout Hasps
■ Allow up to six workers to lock out a single energy source
■ Rustproofed, plated and vinyl-coated
■ Labeled hasps feature anodized aluminum alloy construction
for long-term durability
■ Permanent “Do Not Operate” labels accept pens, pencils
and permanent markers
Safety Lockout Hasps
Jaw Diameter
Qty.
Cat. No.
1 in.
3
44-800
1 in.
50
44-1800
1-1/2 in.
2
44-801
Labeled Safety Lockout Hasps
D-40
www.idealindustries.com
Legend
Color
Qty.
Cat. No.
Do Not Operate
Blue
1
44-790
Do Not Operate
Red
1
44-791
Do Not Operate
Red
50
44-1791
1-800-435-0705 for Customer Service
Wire Management
Python™ Adjustable Locking Cable
Python™ Adjustable Locking Cable secures
anything within its grasp. It’s the only locking
cable that is always the right length for
your application. This exclusive, patented
product holds the flexible steel cable tight at
any position for infinite possibilities.
■ Application Flexibility – Interchangeable cables
■ Keyed Alike Convenience – Rekeyable cylinder
■ Cut Resistance – 3/8 in. (10mm), 100% steel braided cable
■ Weather Tough – Rust resistant aluminum lock body
Description
Cat. No.
■ Scratch Resistant – Vinyl cable sleeve and lock body bumper
Master Lock Python Kit with 6 ft. Cable-keyed different
44-990
Other Applications: Bikes, lawn furniture, lawn mowers, job sites,
canoes, boats, skis, snowboards, generators, pickup truck cargo,
spare tire locks and much more.
Master Lock Python Kit with 6 ft. Cable-keyed alike*
44-991
12 ft. (3.7m) x 3/8 in. (10mm) Cable for Python Lock*
44-992
*Special order thru Customer Service.
Pro-Series® Shackless Lock and Hasp
■ Ideal for vans, trucks, gates and vending
■ Defeats attempts to pry and cut
■ Hardened solid steel lock body withstands forcible attacks
■ Complete with high security 6-pin Pro Series® Cylinder
Description
Cat. No.
Hidden Shackle Solid Steel Padlock*
44-994
Solid Steel Hasp for use with 44-994*
44-993
*Special order thru Customer Service.
1-800-435-0705 for Customer Service
www.idealindustries.com
D-41
Lockout/Tagout
■ Infinite Locking Positions – The patented lock
holds the cable tight at any position from
1 ft. (30cm) to 6 ft. (1.8m)
Lockout Signs
Safety Signs
■ Resistant to both chemicals and abrasion —
protected graphics for indoor and
outdoor use
■ Resistant to both
chemicals & abrasion —
protected graphics for
indoor & outdoor use
Lockout/Tagout Signs
Legend
Legend
Material
Size (In.)
Cat. No.
OSHA Regulation
Self-sticking
polyester
3-1/2 x 10
44-877
OSHA Regulation – Bilingual
Self-sticking
polyester
7 x 10
44-878
Magnetic
5x7
Danger – Breakers Locked Out
Material
Size (In.) Cat. No.
Danger – High Voltage
Fiberglass
10 x 14
44-862
Danger – High Voltage
Self-Sticking Polyester
7 x 10
44-863
Danger – High Voltage – Keep Out
Fiberglass
10 x 14
44-880
Danger – High Voltage – Keep Out
Self-Sticking Polyester
7 x 10
44-881
Danger High Voltage – Spanish
Self-Sticking Polyester
7 x 10
44-865
44-890
Flash Protection Labels and Signs
National Electric Code 110.16 Flash Protection: Switchboards, panel boards, industrial control panels, and motor control
centers, in other than dwelling occupancies, that are likely to require examination, adjustment, servicing or maintenance while energized,
shall be field marked to warn qualified persons of potential electric arc flash hazards. The marking shall be located so as to be clearly visible to
qualified persons before examination, adjustment, servicing or maintenance of the equipment.
Required Labels –
44-892/44-893
Recommended Signs –
44-896
Arc Flash Labels
44-894/44-895
Description
Type
Size
NEC Arc Flash, Warning
Self-Sticking polyester
NEC Arc Flash, Warning
Self-Sticking polyester
NEC Arc Flash, Danger
NEC Arc Flash, Danger
NEC Arc Flash, Warning
D-42
Qty./Bag
Cat. No.
3-1/2 in. x 5 in.
5
44-892
5 in. x 7 in.
5
44-893
Self-Sticking polyester
5 in. x 7 in.
5
44-894
Self-Sticking polyester
4 in. x 6 in.
5
44-895
Self-Sticking polyester
7 in. x 10 in.
1
44-896
www.idealindustries.com
1-800-435-0705 for Customer Service
Test & Measurement
E
Multimeter Selection Guide
D
•
•
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
•
III
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
61-610
D
•
•
A
•
•
•
•
61-614
•
•
•
•
•
61-605
•
•
•
•
610
61-495
•
•
•
•
61-494
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
61-360
•
•
•
•
61-361
•
•
•
•
•
600
•
•
•
•
61-354
•
•
•
•
•
•
•
•
•
•
•
•
•
490
61-352
•
•
•
•
•
•
•
360
61-350
•
•
•
•
61-324
•
•
•
•
350 Series
61-322
•
•
320 Series
61-320
61-314
Selection Guide
E-2
61-312
MULTIMETER SELECTION GUIDE
MEASUREMENT FUNCTIONS
AC & DC Voltage
AC Current
DC Current
Resistance
LV Resistance
Audible Continuity
Diode Test
Capacitance
Frequency
Temperature
Duty Factor
Battery Test
Decibels
Phase Rotation
FEATURES
Display Type (Digital or Analog)
True RMS
Auto/Manual Ranging
Data Hold /Auto Hold
Max Hold
Peak Hold
Min/Max
Min/Max/Avg
Peak Min/Max
Relative Mode
High Speed Analog Bar Graph
Auto Power Off
Backlight
Low Battery Indication
Non-Contact Voltage
Dual Display
Overload Protection on All Ranges
Data Logging
Data Acquisition
Memory Storage & Recall
Optical RS-232 Interface
Optional ProVision™ Software
Warranty (years)
CERTIFICATIONS
UL 61010 Listed C US
CAT Rating
CE
61-310
310 Series
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A
A
2
2
2
•
II
•
•
II
•
•
II
•
•
D
D
D
•
D
•
D
•
•
D
D
•
D
D
•
•
D
D
•
•
D
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D
D
•
D
•
D
D
•
•
D
•
•
D
D
•
D
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
2
2
2
2
•
•
•
•
•
•
•
2
•
III
•
•
III
•
•
III
•
•
III
•
•
III
•
•
III
•
•
2
2
2
2
2
•
•
2
•
II
•
•
II
•
•
II
•
•
IV
•
•
IV
•
•
IV
•
www.idealindustries.com
D
•
D
•
•
•
1-800-435-0705 for Customer Service
Test and Measurement
®
Contractor-Grade Multimeters
61-324
True RMS, AC/DC
current, backlight data
acquisition and
RS-232 interface
Features
1000V
600V
■ AC/DC voltage
■ Capacitance
■ Auto/manual ranging
■ Peak min/max
■ Max/min
■ Relative mode
■ Data hold
Data acquisition and analysis with
320 ProVision™ software for 324.
■ Low battery indicator
■ Auto power off
■ 2-year warranty
61-322
True RMS,
AC/DC current
61-320
320 Series Specifications
61-320
RANGE & RESOLUTION
61-322
61-324
BASIC ACCURACY
AC VOLTAGE
400.0m/4.000/40.00/400.0/750 V
1.3%
1.3%
1.3%
DC VOLTAGE
400.0m/4.000/40.00/400.0/1000 V
0.5%
0.5%
0.5%
AC CURRENT
400.0µ/4000µ/40.00m/400.0m A
—
1.5%
1.5%
DC CURRENT
400.0µ/4000µ/40.00m/400.0m A
1.5% (µA range only)
1.5%
1.5%
RESISTANCE
400.0/4.000k/40.00k/400.0k./4.000M/40.00M Ω
0.7%
0.7%
0.7%
CAPACITANCE
4.000n/40.00n/400.0n/4.000µ/40.00µ/
400.0µ/4.000m/40.00m F
1.9%
2.0%
2.0%
4.000k/40.00k/400.0k/4.000M/40.00M Hz
0.01%
0.1%
0.1%
FREQUENCY
Accessories
N12966
Includes
Premium Test Leads w/Alligator Clips
320 Series
ProVision Software
TL-100
61-904
Optional
Carrying Case
C-290
Current Clamp Adapters (page E-30)
320 Series ProVision™
Software
Magnetic Strap
61-565
61-565
ProVision™ Software
61-904
RS-232 Cable
61-905
Magnetic hand strap fits
Platinum Pro® and 350
Optional magnetic strap
Series Multimeters
frees up your hands
to help you work safe.
61-905
Optical RS-232
Cable
For 320 Series
Meters
1-800-435-0705 for Customer Service
www.idealindustries.com
E-3
320 Series
■ Frequency
®
Industrial-Grade Multimeters
61-495
Features
Data logging (40,000
records), thermocouple,
software and cable
interface included
600V
■ True RMS
■ Data acquisition
■ Data logging
490 Series
■ Data storage
■ Frequency
■ Capacitance
■ Temperature
■ Low voltage Ω
■ Duty factor
Data acquisition and analysis
with 490 ProVision™ software.
■ dBm/dB
■ Auto/manual ranging
■ Dual display
61-494
■ Analog bar graph
Data logging
(6,000 records)
■ Auto power off
■ Peak hold
■ Min/max/avg
■ Relative mode
■ 20,000 count high
resolution mode
Accessories
■ Backlight
Includes
■ Low battery indication
Carrying Case
C-290
■ 2-year warranty
Premium Test Leads with Alligator Clips
TL-100
Optional
Current Clamp Adapters (page E-30)
490 Series Specifications
61-494
RANGE & RESOLUTION
61-495
BASIC ACCURACY
Magnetic Strap
61-565
ProVision™ Software*
61-900
61-902
AC VOLTAGE
20.000m/200.00m/2.0000/20.000/200.00/750.0 V
0.7%
0.7%
RS-232 Cable*
DC VOLTAGE
20.000m/200.00m/2.0000/20.000/200.00/1000.0 V
0.06%
0.06%
*Included with 61-495
AC CURRENT
20.000m/200.00m/2.0000/10.000 A
0.1%
0.1%
DC CURRENT
20.000m/200.00m/2.0000/10.000 A
0.3%
0.2%
RESISTANCE
200.00/2.0000k/20.000k/200.00k/
2.0000M/20.000M/200.00M/2.0000G Ω
0.6%
0.6%
2.0000k/20.000k/200.00k/
2.0000M/20.000M/200.00M Ω
0.3%
0.3%
61-900
4.000n/40.00n/400.0n/4.000µ/ 40.00µ/
400.0µ/4.000m/40.00mF
0.9%
0.9%
490 Series ProVision™
Software
LV RESISTANCE
CAPACITANCE
FREQUENCY
20.000/200.00/2.0000k/20.000k/200.00k/1.0000M Hz
0.01%
0.01%
DUTY FACTOR
20% - 80%
1.0%
1.0%
TEMPERATURE
-150° F to 2200° F (-100° C TO 1200° C)
0.1%
0.1%
N12966
61-465
Thermocouple Adapter
61-461
Beaded K-type
thermocouple
E-4
www.idealindustries.com
490 Series
ProVision Software
61-902
Optical RS-232
Cable
For 490 and 630
Series Meters
1-800-435-0705 for Customer Service
Test and Measurement
61-350 Series Meters
Features
600V
■ AC/DC voltage
■ Auto/manual ranging
■ Non-contact voltage (80-600VAC)
61-350
■ Resistance
350 Series
■ Audible continuity
■ Diode test
■ Data hold
■ Low battery indicator
■ Auto power off
■ 2-year warranty
61-352
AC/DC current,
frequency,
capacitance, max/min
61-354
TRMS, AC/DC current,
frequency, capacitance,
max/min
350 Series Specifications
61-350
61-352
61-354
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
200.0m/2.000/20.00/200.0/750V
1.5%
200m/2/20/200/750 VAC
1.5%
200m/2/20/200/750 VAC
1.5%
DC VOLTAGE
200.0m/2.00/20.00/200.0/1000V
0.5%
200m/2/20/200/1000 VDC
0.5%
200m/2/20/200/1000 VDC
0.5%
—
1.5%
2.000A/10.00 A
1.5%
2.000A/10.00 A
1.5%
AC/DC CURRENT
RESISTANCE
200/2k/20k/200k/2M/20M Ω
0.7%
200/2k/20k/200k/2M/20M Ω
0.7%
200/2k/20k/200k/2M/20M Ω
0.7%
CAPACITANCE
—
2.0%
2.00µ-200.0µ/2.000m F
2.0%
2n-200µ/2.000m F
2.0%
FREQUENCY
—
0.01%
2k/20k/200k/2M/20M Hz
0.01%
2k/20k/200k/2M/20M Hz
0.01%
N12966
Accessories
Includes
Premium Test Leads w/Alligator Clips
TL-100
Optional
Carrying Case
C-290
600A AC/DC Clamp Adapter
61-334
Current Clamp Adapters
61-451
Magnetic Strap
61-565
61-565
Magnetic hand strap fits
Platinum Pro® and 350
Optional magnetic strap
Series Multimeters
frees up your hands
to help you work safe.
1-800-435-0705 for Customer Service
Each multimeter
has a non-contact
voltage indicator
feature.
www.idealindustries.com
E-5
Test-Pro®
Contractor-Grade Multimeters
Features
600V
■ AC/DC voltage
360 Series
■ AC/DC current
61-361
■ Resistance
True RMS,
phase rotation,
capacitance,
frequency
■ Audible continuity
■ Manual ranging
■ Rugged construction
■ Auto power off
■ Low battery indication
■ 2-year warranty
360 Series Specifications
61-360
RANGE & RESOLUTION
61-361
BASIC ACCURACY
AC VOLTAGE
200.0m/2000m/20.00/200.0/600 V
1.0%
2.0%
DC VOLTAGE
200.0m/2000m/20.00/200.0/600 V
0.5%
1.2%
61-360
AC CURRENT
DC CURRENT
2.000 A
2.000 A
1.5%
1.0%
3.0%
2.5%
Max hold,
data hold
RESISTANCE
200.0/2.000k/20.00k/200.0k/20.00M/200.0M Ω
1.0%
1.0%
CAPACITANCE
20.00µ/200.0µ/2.000m/20.00m F
—
4.0%
10.0-100.0k Hz
—
0.50%
—
80-500V
(50-500Hz)
FREQUENCY
PHASE
ROTATION
N12966
Accessories
Includes
Standard Test Leads
TL-58
Alligator Clip Lead
K-7515
Optional
Carrying Case
C-290
Current Clamp Adapters (page E-30)
61-565
Magnetic Strap fits 360
Series Multimeters
E-6
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
600 Series Pocket Meter
Features
61-605
Audible continuity,
auto power off, test
lead storage
■ Low cost, multi-function
■ Convenient pocket size
■ Built-in test stand
310 & 600 Series
300V
■ Overload protection on
all ranges
■ 2-year warranty
310 Series Digital Meters
61-310
Features
Manual ranging, tests
batteries, DC current
600V
■ AC/DC voltage
■ Current
■ Resistance
■ Audible continuity
■ Temperature
61-312
■ Data hold
Auto ranging, AC/DC
current, capacitance,
frequency, auto power
off, low battery indication
■ Diode test
■ Large numbers displayed
■ Overload protection on
all ranges
■ Rubber boot
■ 2-year warranty
61-314
Auto ranging, true RMS,
AC/DC current,
capacitance, frequency,
auto power off, low
battery indication
310 Series Specifications
61-310
RANGE &
RESOLUTION
61-312 & 61-314
ACCURACY
RANGE &
RESOLUTION
61-605
ACCURACY
RANGE &
RESOLUTION
ACCURACY
DC VOLTAGE
200.0m/2.000/20.00/200.0/600 VDC
0.8%
400.0m/4.000/40.00/400.0/600 VDC
0.8%
200.0m/2.000/20.00/200.0/600 V
2.0%
AC VOLTAGE
200.0/600 VAC
1.2%
4.000/40.00/400.0/600 VAC
1.2%
200.0m/2.000/20.00/200.0/600V
4.0%
CURRENT
200.0m/10 ADC
1.5%
400.0µ/4000µ/40.00m/400.0m/10A AC/DC
1.5%
—
—
400.0/4.000k/40.00k/400.0k/4.000M/40.00M Ω
1.0%
200.0/2.000k/20.00k/200.0k/
2.000M/20.00MΩ
3.0%
—
RESISTANCE
200.0/2.00k/20.00k/200.0k/20M
1.0%
CAPACITANCE
—
3.0%
40.00n/400.0n/4.000µ/40.00µ/400.0µ F
3.0%
—
FREQUENCY
—
3.0%
10.00/100.0/1.000k/10.00k/1.000M/10.00M Hz
3.0%
—
—
-4-1382°F (-20-750°C)
1.0%
-4-1382°F (-20-750°C)
1.0%
—
—
TEMPERATURE
N12966
1-800-435-0705 for Customer Service
www.idealindustries.com
E-7
Analog Multimeters
Features
300V
■ Multi-color analog display with
mirrored scale
■ High-impact thermoplastic case
■ Battery test
■ 2-year warranty
61-614
610 Serues
Audible continuity,
built-in stand
61-610
Pocket size,
diode protected
610 Series Specifications
61-610
61-614
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
10/50/250/500 V
+/- 4.0% Full Scale
10/50/250/1000 V
+/- 4.0% Full Scale
DC VOLTAGE
DC CURRENT
10/50/250/500 V
500µ/50m/250m A
1 M Ω Full Scale
5 k Ω Mid Scale
+/- 3.0% Full Scale
+/- 3.0% Full Scale
2.5/10/50/250/1000 V
5m/50m/500m/20 A
10k/100k/10M Ω Full Scale
50/500/50k Ω Mid Scale
+/- 3.0% Full Scale
+/- 3.0% Full Scale
RESISTANCE
DECIBELS
BATTERY TEST
+/- 3.0% Arc Length
-20 to +56 dB
-8 to +62 dB
—
1.5 , 9.0 VDC
+/- 3.0% Arc Length
N12966
E-8
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Clamp Meter Selection Guide
1-800-435-0705 for Customer Service
61-736
61-764
61-766
61-768
61-772
61-774
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Selection Guide
61-732
•
•
•
61-704
•
•
•
61-702
•
•
•
•
•
•
•
•
770
•
•
•
•
•
760 Series
•
61-701
MEASUREMENT FUNCTIONS
AC Voltage
DC Voltage
AC Current
DC Current
Resistance
Audible Continuity
Diode Test
Capacitance
Frequency
Temperature
Leakage Current
FEATURES
Display Type (Analog or Digital)
AC Current Capacity
DC Current Capacity
True RMS
Auto/Manual Ranging
Data Hold
Max Hold
Inrush Current
Min/Max
DCA Zero
Pointer Lock
Auto Power Off
Non-Contact Voltage Indication
Harmonics Indicator
Vibration Mode
Analog Output
Backlight
Low Battery Indication
High Voltage Warning
Overload Protection
Inches
Conductor Size (mm)
Warranty (years)
CERTIFICATIONS
UL 61010 Listed C US
CAT Rating
CE
61-452
CLAMP METER SELECTION GUIDE
730
61-710
700 Series
•
•
D
60
•
•
•
D D D
A D
D
D
D D D
200 200 200 600 400 400 660 660 660 1000
660
•
•
• • •
• • • • • •
• • •
• • • • • •
• • •
• • • •
• • • •
•
•
• • •
• • • • • •
• • •
• •
• •
• •
•
• • •
•
• • •
•
• • •
•
1.2" 1.3" 1.3" 1.3” 1.2" 1.3"
(30) (33) (33) (33) (30) ( 33)
2
2
2
2
2
2
•
•
•
III
•
•
III
•
•
III
•
•
•
III
•
D
1000
1000
•
•
•
•
•
•
•
• • • • •
• • • • •
• • • • •
• • • • • •
1.3" 1.4" 1.4" 1.4” 2.0” 2.0”
( 33) (36) (36) (36) (51) (51)
2
2
2 2
2
2
•
•
III
•
•
IV
•
•
IV
•
•
IV
•
•
IV
•
•
IV
•
www.idealindustries.com
E-9
4-in-1 Test Tools
Features
1000V
■
200AAC current capability
■ Non-contact voltage
(40-600VAC)
■ Capacitance
■ Low battery indication
700 Series
61-704
■ Overload protection on
■
■
■
■
■
■
200 Amp
Clamp/Multimeter
Use it for testing a variety of
electrical parameters on
branch circuits or at
receptacles.
True RMS,
backlight, vibration
mode to verify AC
voltage, harmonics
indicator, max hold,
CAT III - 1000V
all ranges
Integral lead storage
Audible dangerous voltage
warning on all ranges
Auto power off
Ergonomic hourglass shape
Compact clamp head
2-year warranty
Non-Contact
Voltage Tester
Use it for one-touch
indication of power without
test leads.
61-701
Frequency, data
hold, max hold,
CAT III - 600V
61-702
Vibration mode to
verify AC voltage,
harmonics indicator,
max hold,
CAT III - 1000V
Voltage Tester with
Shaker
Use it for tactile feel of
AC voltage.
Accessories
Includes
Carrying Case
C-700
Silicone Test Leads
TL-102
700 Series Specifications
61-701
RANGE & RESOLUTION
AC VOLTAGE
200.0/600 V
DC VOLTAGE
20.00/200.0/600 V
AC CURRENT
200.0 A
RESISTANCE
200.0/200.0k Ω Scale
CAPACITANCE
200.0µ F
FREQUENCY
2.000k/20.00k/40.00k Hz (Auto)
Jaw opening is 1.3” (33mm).
61-702 & 61-704
BASIC ACCURACY
RANGE & RESOLUTION
BASIC ACCURACY
1.2%
2000m/200.0/750 V
1.2%
0.5%
3.0%
1.0%
3.0%
0.1%
2000m/200.0/1000 V
200.0 A
200.0/200.0k Ω
200.0µ F
—
0.5%
3.0%
1.0%
3.0%
Harmonics Tester
Use it to ensure that a circuit
contains clean power, free of
harmonic distortion.
N12966
E-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
400 Amp Clamp Meters
600V
■
■
■
■
■
■
■
■
Measures up to 400AAC
Non-contact voltage indicator
(70V-600VAC)
Tapered jaws with hook tip
Auto/manual ranging
Data hold
Auto power off
Low battery indicator
2-year warranty
Tapered jaws with
hook tip for easy
wire separation
730 Series
Features
Data hold button
conveniently located
for thumb
Convenient one-touch
non-contact voltage
indication
Auto/manual ranging
Easy-to-read
large numbers
and symbols
61-732
61-736
True RMS
Accessories
Includes
Carrying Case
C-90
Standard Test Leads
TL-58
730 Series Specifications
61-732
RANGE & RESOLUTION
61-736
BASIC ACCURACY
40.00/400.0 A
400.0/600 V
1.7%
1.7%
1.2%
1.2%
DC VOLTAGE
400.0/600 V
0.5%
0.5%
RESISTANCE
400.0/4.000k/ 40.00k
400.0k/4.000M/40.00M Ω
1.0%
1.0%
AC CURRENT
AC VOLTAGE
Compact jaw for use
in tight locations.
Jaw opening is 1.25” (32mm).
N12966
1-800-435-0705 for Customer Service
E-11
660 Amp Clamp Meters
w/TightSight™ bottom display
Features
600V
Audible and visual high voltage
indication over 30V
AC/DC on all functions
1000V
■ Measures up to 660AAC
Contains all the capabilities of
a full-function multimeter
■ Voltage-presence warning on all lead
760 Series
■
■
■
■
■
■
■
■
■
functions (selectable audible)
Bright, bold backlit display
Tapered jaws with hook tip
Max/min
Inrush current
Audible continuity
Selectable auto power off
Data hold
Low battery indicator
2-year warranty
Tapered jaws with
hook tip for tight
locations and easy
wire separation
One-touch backlight
button for glowing
green display
illumination
Data hold button and offset
thumb wheel for one-handed
operation
Large numbers and symbols
are easy-to-read
Patented backlit TightSight™ display for
viewing in dark, bright or tight locations;
Hinged rubber cover prevents display
damage (field replaceable)
61-764
61-768
660 ADC current
measurements,
True RMS
61-766
True RMS,
Capacitance,
Frequency
measurement via
clamp head or leads,
66AAC low range
760 Series
61-764
AC Current
DC Current
AC Voltage
DC Voltage
Resistance
Capacitance
–
Frequency
–
Range & Resolution
61-766
66.00/660.0 A
–
–
660m/6.600/66.00/660.0/750 V
660m/6.600/66.00/660.0/1000 V
660.0/6.600k/66.00k/660.0k/6.6M/10M Ω
6.600µ/66.00µ/660.0µ F
20 - 400 Hz
Sensitivity: ≥5A for 20-100 Hz
≥10A for 100-400 Hz
Safety First!
61-768
Accuracy
660.0 A
660.0 A
–
1.7%
1.5%
1.2%
0.5%
1.0%
3.0%
–
0.1%
Jaw Size 1.42” (36 mm)
N12966
The complete line of industrial clamps from IDEAL was
designed to set a new standard for safety technology. It
starts with the revolutionary TightSight™ display. It allows an
electrician to keep his head and face out of potentially
dangerous panels while viewing the measurement. The
high voltage indicator is another feature not to be taken for
granted. It indicates the presence of voltage through the
test leads even with the dial set to the wrong function. The
CAT III and IV ratings, rugged construction and UL listing
should give every electrician the confidence to go about
the job without worrying about equipment safety.
Accessories
Includes
Carrying Case
C-760
Test Leads w/Alligator Clip
TL-104
E-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
1000 Amp Clamp Meters
w/TightSight™ bottom display
Features
600V
1000V
■ Measures up to 1000A
■
■
■
■
■
■
■
■
■
■
lead functions (selectable audible)
Bright bold backlit display
Tapered jaws with hook tip
True RMS
Max/min
Inrush current
Audible continuity
Selectable auto power off
Data hold
Low battery indicator
2-year warranty
770 Series
■ Voltage-presence warning on all
61-774
AC/DC current,
capacitance
Exclusive TightSight™
Display
770 Series
AC Current
DC Current
AC Voltage
DC Voltage
Resistance
Capacitance
Range & Resolution
61-772
61-774
Accuracy
66.00/660.0/1000 A
–
660.0/1000 A
660m/6.600/66.00/660.0/750 V
660m/6.600/66.00/660.0/1000 V
660.0/6.600k/66.00k/660.0k/
6.6M/10M Ω
6.600µ/66.00µ/
–
660.0µ F
C
1.0%
3.0%
SSIFIE
LA
UL
®
D
Jaw Size 2” (51 mm)
1.7%
1.5%
1.2%
0.5%
N12966
Accessories
61-772
Includes
Carrying Case
C-770
Test Leads w/Alligator Clip Lead
TL-104
1-800-435-0705 for Customer Service
www.idealindustries.com
E-13
Analog Clamp Meter
Features
■ Analog display
■ Pointer lock
61-710
■ 2-year warranty
600AAC current, Ohms scale on
dial drum, broad frequency
response (50 to 400 Hz)
Includes carrying case
Clamp Meters
710 Series Specifications
61-710
RANGE & RESOLUTION ACCURACY
AC VOLTAGE
150/300/600 V
DC VOLTAGE
—
AC CURRENT
6/20/60/200/600 A
3.0% F.S.
2k Ω
—
3.0% F.S.
RESISTANCE
TEMPERATURE
3.0% F.S.
N12966
Leakage Current Clamp Meter
Features
300V
■
■
■
■
■
40mA to 60AAC
current capability
Data hold
Analog bar graph
Min/max
2-year warranty
61-452
Includes carrying case
Current Clamp Specifications
61-452
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
400.0 V
1.5%
AC CURRENT
40.00/400.0m/4.000/40.00/60.0 A
2.0%
RESISTANCE
400.0 Ω
1.0%
N12966
E-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Combo Cases™
Features
■ Top selling tools in rugged cases
■ Unmatched value
■ Large storage compartments
■ 2-year warranty
Combo Cases™
61-2000
Tester Combo Case™ Includes:
#61-086 Vol-Con® XL Voltage Tester
#61-534 Circuit Breaker Finder
#61-063 Non-Contact Voltage Tester
61-2001
Meter Combo Case™
Includes:
#61-350 Multimeter
#61-732 400 Amp Clamp
61-2002
Clamp Combo Case™ Includes:
#61-766 TightSight™ Clamp Meter
#61-521 Phase Rotation Tester
1-800-435-0705 for Customer Service
www.idealindustries.com
E-15
SureTest® Open/Closed Circuit Tracers
61-954
Standard LED
receiver, transmitter,
test lead set
Features
600V
■ Identifies breakers and fuses
■ Pinpoints opens and shorts
■ Traces wires
■ “0-99” display of signal strength
Circuit Tracers
■ Audible intensifies in tone/pitch
■ Can be used on circuits
■
■
■
■
61-958
0-600V AC/DC
Works on energized or
de-energized circuits
Four modes of sensitivity –
search high, search low,
trace and breaker
Peak bar graph
2-year warranty
Super bright rotating
OLED display receiver,
transmitter, test lead
set, inductive clamp,
battery pack
ly
The on
tracer
circuit
with
y™
Displa
Swivel
61-956
Super bright
rotating OLED
display, transmitter,
test lead set
ly
The on
tracer
circuit
with
y™
Displa
Swivel
Exclusive Rotating Display
Revolutionary technology in the
SureTest® 958 rotates the display in
90° increments so that you always
receive an upright reading. Even when
the receiver is pointing down, you can
keep up.
Transmitter will work on a
de-energized circuit and won’t affect
GFCIs and sensitive equipment on an
energized circuit.
16
www.testersandmeters.com
E-16
www.idealindustries.com
AA batteries provide the
transmitter and receiver
4x the power.
1-800-435-0705 for Customer Service
Test and Measurement
Sorting Wires
Individual wires can be sorted, opens
can be located and shorts can be
isolated.
Inductive Clamp
allows you to induce a tracer signal
on the cable without affecting the low
voltage signals on the circuit.
In Breaker Mode
receiver identifies the correct circuit to
which the transmitter is connected.
Circuit Tracers
SureTest® Circuit Tracers
RC-958
IC-958, BP-958
Receiver
Bright OLED
rotating display
Inductive Clamp w/
Battery Pack
RC-954
TR-958
Receiver
Red LED display
Transmitter
Kit Components
Accessories
Kit Contents
61-954
61-956
61-958
Includes
Transmitter
TR-958
TR-958
TR-958
Fuse – High-energy, Fast-acting, 1A/1000V
F-956
Receiver
RC-954
RC-958
RC-958
Magnetic Strap
61-565
Tracer Test Lead Set
TL-956
TL-956
TL-956
Tracer Test Lead Set (includes 1-6 below)
Inductive Clamp
IC-958
1. Outlet Plug Adapter for Transmitter
Battery Pack
BP-958
Hard Carrying Case
C-954
C-954
C-958
Batteries
■
■
■
Instruction Manual
■
■
■
TL-956
TLOP-956
2. Blade Prongs for Lead Adapters (2/set)
TLBP-956
3. Ground Prong for Lead Adapter
TLGP-956
4. Alligator Clips for Lead Adapters (2/set)
TLAC-956
5. 3 ft. Lead Adapters for Transmitter (2/set) TLA1-956
6. 25 ft. Lead Adapter for Transmitter
TLA2-956
SureTest® Circuit Tracer Specifications
Transmitter:
Operating Voltage
0 - 600V AC/DC
TL-956
Battery Power
1.5V x (4) AA batteries (NEDA 15A, IEC LR6)
Test Lead Kit
Battery Life
25 hours open circuit testing/6 hours short circuit tracing
Indicators
On/Off, Line energized, low battery
4
1
2
3
Receiver:
Sensing
Magnetic
Battery Power
1.5V x (3) AA batteries (NEDA 15A, IEC LR6)
Battery Life
20 hours
6
5
N12966
Made in USA
1-800-435-0705 for Customer Service
www.idealindustries.com
E-17
Features
■ Ground resistance
measurements
■ Auto ranging
Ground Resistance Meters
■ Auto power off
■ 2-year warranty
61-920
Ground Resistance Clamp
Meter
Large clamp size, backlight,
saves up to 99 measurements
300V
61-788
MEGGER® 3-Pole Meter
2- & 3-point fall of potential
methods, easy single pushbutton operation, includes
terminal shorting bars,
rugged weatherproof
construction, optional lead
set (61-798) not included
61-789
MEGGER® 4-Pole Meter
3- & 4- fall of potential
methods, soil resistivity, easy
single push-button operation,
includes terminal shorting
bars, rugged weatherproof
construction, optional lead set
(61-798) not included.
61-798
MEGGER® Earth Resistance Lead
Set Kit
Kit includes four silicone test leads
with alligator clips (3,15, 30, 50m),
20 in. auxiliary grounding rods (2 pr.)
and padded nylon carrying case
Specifications
61-920
ACCURACY
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
0/120/1200Ω
1.5%
200.0/2.00kΩ
2.0%
400.0/600/1500 Ω
2.0%
100m/1000m/15/30 A
2.0%
—
—
—
—
—
20.00/200.0/2.000k/20.00kΩ
SOIL RESISTIVITY
MEGGER® is a registered trademark of Megger, Inc.
*Clamp accomodates conductor size up to 1.25 in. (32mm).
E-18
61-789
RANGE & RESOLUTION
GROUND RESISTANCE
GROUND LEAKAGE CURRENT
61-788
www.idealindustries.com
2.0%
N12966
1-800-435-0705 for Customer Service
Test and Measurement
Features
300V
proper insulation
■ Checks existing installations
and motor windings for
breakdowns in insulation
■ 2-year warranty
Insulation Testers
■ Checks new installations for
61-791
MEGGER® Hand-held
Insulation Tester
Test voltage: 250/500/1000V,
test inhibition >25V, default
voltmeter to 600V AC/DC,
digital display with analog
arc, auto discharge, auto
power off, auto ranging,
protective rubber boot,
continuity, low battery
indication, Cat III – 300V,
includes carrying case
61-792
MEGGER® 5kV Insulation
Tester
500V/1000V/2500V/5000V
test voltages, battery or
hand-crank operation, auto
discharge, AC/DC voltage
to 600V, battery test,
Cat III - 300V, includes
carrying case
Insulation Tester
Specifications
61-791
61-792
RANGE & RESOLUTION
ACCURACY RANGE & RESOLUTION
TEST VOLTAGE
250/500/
1000 V
INSULATION
RESISTANCE
999MΩ
3.0%
CONTINUITY
0.01-100Ω
3.0%
ACCURACY
500/1000/
2500/5000 V
100k - 20GΩ
5.0%
MEGGER® is a registered trademark of Megger, Inc.
N12966
1-800-435-0705 for Customer Service
www.idealindustries.com
E-19
The IDEAL Power Quality Analyzer is a versatile and easy-to-use tool that will give you the information you need to get the job done.
The unit measures and analyzes power quality on both single-and three-phase electrical systems. Instaneous readouts of current,
voltage, power and harmonics including tables, bar graphs and even individual waveforms, make job site data interpretation easy. With
a real-time clock and 1MB of memory, the Power Analyzer stores data that can be downloaded to a personal computer for in-depth
analysis using PowerVision™ software.
It’s everything a professional needs for monitoring and analysis in a single unit: rugged, versatile and
easy to use. Models available with 3 or 4 current channels to meet your needs and budget.
3-Phase Power Analyzer
Features
800 Series
■ True RMS
■ Optional FIFO memory
■ Single- or three-phase measurements
■ Real-time clock
■ Data logging (1MB memory)
■ Programmable trigger-points and
■ Up to one month of recording time
start/stop time
■ Intelligent battery charging system
■ Easy set-up
■ Interactive demo CD
Power & Energy Measurements
■ Kilowatts (KW)
■ Volt-amperes (VA)
■ Inductive reactive power (kvarL)
■ Capacitive reactive power (kvarC)
■ Power factor (PF)
■ Frequency
■ Kilowatt hours (kWh)
■ Reactive power per hour (kvarhL,
kvarhC)
■ 4-channels for voltage measurements
■ 4-channels for current measurements*
■ Auto ranging
■ Min/max/avg
■ Energy and Harmonics Program
■ PowerVision™ Software
■ Lightweight, portable design
■ Easy-to-use push-button operation
■ Backlit display
■ Customized data collection
■ 2-year warranty
Harmonics Measurements
■ Total harmonic distortion (% THD)
■ Harmonic factorization (FFT) to 51st
harmonic
*Model 805 equipped with three channels for
current
Power Analyzer Specifications
61-805, 61-806, 61-807
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
20 to 600 V (phase-neutral)
20 to 866 V (phase-phase)
0.5%
0.5%
AC CURRENT
10 to 1000 A (with supplied clamp adapters)
1.0%
ACTIVE POWER
866 kW (with supplied clamp adapters)
1.0%
REACTIVE POWER
866 kW (with supplied clamp adapters)
1.0%
0.5 to 1.0
1.0%
POWER FACTOR
Power Analyzer Display Screens
Program Setup
E-20
www.idealindustries.com
Table
Exploded View
Bar Graph
Scope View
Waveform Zoom
1-800-435-0705 for Customer Service
Test and Measurement
Standard Equipment
100AAC
Neutral Clamp
Test Leads with
Alligator Clips
800 Series
1000AAC
Clamp Adapters
Power Analyzer
RS-232
Interface/
Power Supply
RS-232
Interface/
Power Supply
Accessory Clamps
Standard Equipment
1000AAC Clamps (61-811)
61-805
61-806
•
•
61-807
•
100AAC Neutral Clamps (61-813)
Voltage leads with
Alligator Clips (TL-806)
Accessories
•
•
•
•
61-811
Power supply with RS-232 Interface
and cables
•
•
•
100AAC neutral clamp (1)
61-813
PowerVision™ Analysis Software
•
•
•
5AAC compact neutral clamp (blue)
61-814
Demonstration CD and Instructions
•
•
•
2000AAC clamps (set of 3)
61-810
Protective Carrying Case
•
•
•
500AAC clamps (set of 3)
61-812
5AAC compact clamps (set of 3)
61-819
100AAC compact clamps (set of 3)
61-820
100AAC compact neutral clamp (blue)
61-821
200/2000/20000AAC Flexible clamp
adapters (set of 3)
61-457
1000AAC clamps (set of 3)
5AAC Compact
Current Clamp
N12966
600V
200/2000/20000AAC
Flexible Clamp Adapters
100AAC Compact
Current Clamp
100AAC
Current Clamp
500AAC
Current Clamp
2000AAC
Current Clamp
PowerVision™ Software
PowerVision™ software provides intuitive analysis of data and automatic generation
of useful tables and graphs. Files are easily downloaded from any 800 series unit.
PowerVision™ provides multiple ways to view basic and detailed information,
allowing you to customize readouts according to your trouble shooting needs.
Compare up to 12 variables simultaneously. Easily scroll through, expand and
collapse data over time. Compare data from multiple files to show before and after
studies. Data can be exported to text files, databases, graphs and tables can be
pasted into Excel or Word reports. Highly-trained technical support people are
always a phone call away.
1-800-435-0705 for Customer Service
Current and Voltage
Harmonic Distortion
www.idealindustries.com
E-21
Voltage Performance Monitor (VPM)
Applications
See voltage through the eyes of your equipment
Monitor voltage near sensitive equipment
Poor voltage quality increases facility expenses, warranty costs and downtime
plus shortens the life of equipment. The IDEAL VPM identifies voltage
conditions that can damage equipment or cause equipment failure.
• Installation and Service Technicians
– Monitor voltage at point of equipment connection
Power Quality Monitor
• Electricians
– Eliminate guesswork on service calls
• Building Maintenance Technicians
– Identify voltage caused equipment failures
• Equipment Manufacturers
– Eliminate unnecessary warranty costs
61-830
• Hospital/IT Maintenance Engineers
– Monitor voltage quality to critical equipment
Features
300V
■ Real-time TRMS voltage, frequency and
■
■
■
■
■
■
harmonics monitoring
Logs voltage, sags, swells and impulses
Measures %THD and logs periods over
3% (line to neutral)
Selectable thresholds based on the most
accepted international standards, defaults to ITIC*
Custom programmable event thresholds
Invertible display, when it is necessary
to plug in upside down
2-year warranty
Voltage Performance Monitor
Display Screens
Monitor Screen: Real-time
information on voltage, voltage
events and harmonics.
*Captures events that would affect equipment on
branch circuit
Log Screen: Review events by
category or chronological order.
Event Detail: Provides a time stamp
with event magnitude and duration.
Accessories
Impulse Detail: Fast response catches
positive and negative impulses up to
4kV.
Includes
Replacement Adapters (set of four)
PA-830
Replacement Carrying Case
61-179
Specifications
Optional
Operating Range
Alligator Clip Adapters (2-wire)
TL-532
Memory
1 ft. US Extension Cord
61-177
Sampling Method
Kit w/(1) SureTest® 164,
(2) VPM 61-830, Soft Case
61-2003
Kit w/(1) SureTest 164,
(4) VPM 61-830, Soft Case
61-2004
®
E-22
www.idealindustries.com
61-830
15-265V
512 events
Continuous (128 samples per cycle)
Voltage Accuracy
1%
Impulse Detection
6µs, 4kV
THD
Set Standard: Select from more than
a dozen threshold options based on
existing standards or customize your
own (defaults to ITIC).
FFT calculation
N12966
1-800-435-0705 for Customer Service
Test and Measurement
SureTest® Circuit Analyzers
Features
300V
■ Super-bright display
61-165
■ High accuracies
■ Measures voltage drop under full load*
SureTest® Circuit Analyzers
Tests AFCIs for proper
operation, tests for
shared neutrals
■ True RMS
■ Line voltage
■ Peak voltage
■ Frequency
■ Ground to neutral voltage
■ Ground impedance
■ Hot and neutral conductor impedances
■ Identifies proper wiring in 3-wire
receptacles
■ Identifies false (bootleg) grounds
■ Tests GFCIs and EPDs for proper operation
■ Conducts testing without disturbing
sensitive loads
■ Verifies isolated grounds
(with 61-176 adapter)
■ 2-year warranty
61-164
*12A, 15A, 20A load tests
61-183
Accessories
Includes
Carrying Case
61-179
1’ Extension Cord
61-182
Optional
Ground Continuity Adapter
61-175
Isolated Ground Adapter
61-176
Alligator Clip Adapter
61-183
61-182
1-ft. Extension Cord
Made in USA
SureTest® 160 Series Specifications
RANGE & RESOLUTION
BASIC ACCURACY
AC VOLTAGE
85.0 - 265.0 VAC
1.0%
FREQUENCY
45.0 - 65.0 Hz
1.0%
IMPEDANCE
0.00 - 1.99 Ω
5.0%
61-175 and 61-176
GROUND-NEUTRAL VOLTAGE
0.0 - 24.0 VAC
2.0%
% VOLTAGE DROP
12A, 15A, 20A load tests
0.1% - 50.0%
5.0%
Ground Continuity and
Isolated Ground Adapters,
respectively
GFCI TEST CURRENT
Times out after 6.5 seconds
6.0 - 9.0 mA
0.0 - 6500 mS
2.0%
1-800-435-0705 for Customer Service
www.idealindustries.com
E-23
Circuit Identifiers
Features
■ Fully automatic operation
■ Positively identifies circuit breakers
Circuit Identifiers
and fuses without service interruption
■ Self calibrating
■ Visual and audible indicators
■ 2-year warranty
61-534
Circuit Identifier with Digital
Receiver
Microprocessor controlled
sensitivity level, verifies proper
wiring, checks GFCI operation,
non-contact voltage, works on
120 and 240V circuits
61-532
Circuit Identifier with
Analog Receiver
Circuit Identifier Specifications
OPERATING VOLTAGE
OPERATING FREQUENCY
61-532
61-534
100 - 140 VAC
100 - 250 VAC
47 - 63 Hz
47 - 63 Hz
N12966
Accessories
Optional
Carrying Case
C-290
Alligator Clip Adapter
TL-532
TL-532
Alligator Plug Adapter
E-24
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
SureTest® Arc Circuit Tester
Features
61-177
61-058
■ Tests GFCIs for proper operation
SureTest® Arc
Circuit Tester
Tests AFCI/GFCI
devices for proper
operation
■ Tests for shared neutrals
■ Verifies wiring configuration
■ Compact size fits comfortably in pocket
■
1-year warranty
1-ft. Extension Cord
Receptacle Testers
■ Tests AFCIs for proper operation
61-184
Alligator Clip Adapter
Accessories
Optional
1’ Cord Adapter
61-177
Allligator Clip Adapter
61-184
Carrying Case with Belt Clip
C-50
C-50
Made in USA
Carrying Case
E-Z Check® Circuit Testers
Features
■ Tests for correct wiring, open ground, reverse
■
■
■
■
■
polarity, open hot, open neutral, hot on neutral,
hot and ground reversed with open hot, and
ground fault interruption in 3-wire, 125VAC
circuits
No-slip ergonomic design maximizes comfort
Premium neon lamps prevent false readings
Tough, impact-resistant case
Tests GFCI receptacles for proper operation
2-year warranty
61-051
E-Z Check® Plus
GFCI Circuit Tester
Tests GFCI
receptacles for
proper operation
61-035
Made in USA
E-Z Check®
Circuit Tester
Receptacle Testers
Features
■ Warns against faulty wiring
in 3-wire receptacles
125VAC circuits
■ 1-year warranty
■ For use on
61-501
GFCI
Receptacle Tester
Tests GFCI
receptacles for
proper operation
61-500
Receptacle
Tester
1-800-435-0705 for Customer Service
www.idealindustries.com
E-25
Vol-Con® Elite Voltage Testers
Features
1000V
■ Digital circuitry for better
Digital Voltage Testers
■
■
■
■
■
■
■
■
■
resolution
Tests for AC Voltage from 24-600VAC
Tests for DC Voltage from 6-220VDC
Audible continuity
Non-contact voltage indication
Low impedance to eliminate ghost
voltages
Low battery indicator
Replaceable silicone test leads
Integral lead storage
2-year warranty
61-092
Vibration mode
Accessories
Includes
Silicone Test Leads
TL-102
Optional
Carrying Case
C-90
61-090
Vibration mode gives a tactile
indication of the voltage level.
Non-contact voltage sensor easily
locates breaks in power cords.
E-26
www.idealindustries.com
N12966
1-800-435-0705 for Customer Service
Test and Measurement
Solenoid Voltage Testers
Features
600V
■ Extremely rugged and reliable
■ Tests for AC Voltage
■ Tests for DC Voltage
■ Replaceable leads with shielded probe tips
■ Bright, long-life LED’s and neon indicator lamp
■ Dual voltage indication for backup safety
61-076
■ 2-year warranty
Vol-Con® Voltage/
Continuity Tester
Automatic switching
continuity tester, tests
from 5-600V AC/DC
Accessories
Includes
Standard Test Leads
61-070
Optional
Resistor-fused Leads*
Padded Nylon Case
Leather Case
61-072
C-90
61-010
*Special, current-limiting resistor in each lead acts as a fuse to
open in a short-circuit situation.
61-065
Made in USA
Vol-Test® Voltage Tester
Tests from 100-600V AC/DC
Features
n®
-Co Tes
ol
ts
V
XL-Series Solenoid Voltage Testers
t
nu
Vo l
ag
■ Extremely rugged and reliable tester
it y
AUDIBLE
600V
e & o n ti
C
■ Vibrates when voltage is present
■ Tests AC/DC Voltage
61-086
■ Replaceable leads with shielded probe tips
Vol-Con® XL
Voltage/Continuity
Tester
Audible continuity,
audible voltage
indication, tests from
6-600V AC/DC
■ Bright, long-life LED’s and neon indicator
■ Dual voltage indication for backup safety
■ Compact size
■ 2-year warranty
Accessories
Includes
Standard Test Leads
TL-80
Optional
Resistor-fused Leads*
TL-82
61-085
Padded Nylon Case
C-90
Vol-Test® XL
Voltage Tester
Tests from
80-600V AC/DC
Leather Case
61-010
*Special, current-limiting resistor in each lead acts as a fuse to
open in a short-circuit situation.
N12966
1-800-435-0705 for Customer Service
www.idealindustries.com
E-27
Solenoid Voltage Testers
■ Vibrates when voltage is present
Split-Jaw™ Smart Meter
Features
1000V
600V
■ Measures 0.1-200AAC*
■ Measures 1.3-750VAC
■ Measures 0.1-1000VDC
A
U
T
O
M
A
T
I
AC/DC Volts C
A
L
L
Y
■ Audible continuity
■ Data hold
■ Integral lead storage
■ Replaceable test leads
■ Auto power off
■ Low battery indication
■ 2-year warranty
S
E
N
S
E
S
AC Amps
61-096
Split-Jaw™
&
Ohms/
Continuity
Accessories
D
I
S
P
L
A
Y
S
Optional
Carrying Case
C-90
Specifications
61-096
1.3 - 750 V
1.5%
DC VOLTAGE
1.8 - 1000 V
-0.6 - 1000 V
1.0%
AC CURRENT
0.6 - 200.0 A
3.0%
RESISTANCE
0 - 2000 Ω
1.0%
SSIFIE
LA
UL
®
D
AC VOLTAGE
C
Electrical Tester
■ Measures 0.1-2000Ω
N12966
*Note: Jaw opening is 0.6 in. (16mm) - up to 1/0 copper cable
E-28
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
VoltAware™ Non-Contact Voltage Tester
Features
1000V
600V
■ Indicates presence of voltage from 50-1000VAC
■ Visual indication of voltage
■ Selectable audible indication of voltage
61-025
VoltAware™ NCV
Tester
Overmolded cushion
grip
■ Green LED indicates power on
■ Low battery indicator
N12966
Electrical Testers
■ Sleek, compact design
■ Battery replacement (AAA size)
■ 2-year warranty
Non-Contact Voltage Tester
Features
600V
■ Tests for voltage from 40V to 600VAC
■ Audible and visual indication
61-063
■ Locates breaks along live insulated wires
Volt-Sensor®
NCV Tester
Overmolded cushion
grip
■ Tests for energized circuits
■ 1-year warranty
Continuity Tester
Circuit Tester
Features
■ Checks continuity of
■
■
■
■
■
dead circuits and
ground on conduit
systems and
identifies wires in
multi-wire cables
61-030
Light signal indicates
Continuity Tester
completed circuit
Bulb-in end can serve
as flashlight
Pocket clip functions as probe
Removable 4-ft. test lead with alligator clip
1-year warranty
N12966
Features
■ Industrial-quality
■
■
■
■
tester checks
voltage from
80V to 600V AC/DC
Neon test lamp at
front of probe
Resistors reduce voltage
reaching leads
24-in. lead — rated 1,000V
1-year warranty
61-040
Test-Glo™ Circuit
Tester
Twin Lead Tester
Features
■ Check voltage from
80V to 500V AC/DC
■ Heavy-duty test probes
■
1-year warranty
1-800-435-0705 for Customer Service
61-503
Twin Lead
Tester
www.idealindustries.com
E-29
3-Phase/Motor Rotation Testers
Features
600V
■ Identifies three-phase sequence
■ Indicates motor rotation
■ Checks for open phases
Specialty Testers
■ For use up to
61-521
600V
3-Phase/Motor
Rotation Tester
■ 2-year warranty
Includes carrying case
N12966
Features
■ For use up to 600V
■ Color-coded insulators over alligator clips
61-520
■ Shock resistant housing
3-Phase/Motor
Rotation Tester
■ Easy to read
■ 2-year warranty
N12966
Includes carrying case
Light Meter
Features
■ Wide lighting range
■ Foot candle and lux measurement
■ Remote light sensor
■ Cosine and color corrected
61-681
■ Peak hold
Digital Light Meter
■ Low battery indication
■
N12966
Specifications
2-year warranty
Includes carrying case
61-681
RANGE & RESOLUTION
ACCURACY
FOOT CANDLES
20.00/200.00/2000.0/200000
2%
LUX
20.00/200.00/2000.0/200000
2%
Infrared Thermometer
Features
■
15:1 angle of viewability
61-682
■ Built-in laser pointer
Infrared Thermometer
■ Backlit display
N12966
■ Auto power off
■ Measures temperatures from 0° F to
(-18° C to 260° C)
■ 2-year warranty
500° F
Specifications
61-682
RANGE & RESOLUTION
ACCURACY
0° F to 500° F (-18° C to 260° C)
3.0%
Includes carrying case
E-30
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Current Clamp Adapters
Features
AC current
■ Extend the current measurement
capabilities of digital multimeters
■ AC milli-volt output
(1mVAC = 1mA)
61-333
500AAC
61-332
200AAC
61-451
300AAC
61-334
600A AC/DC
61-436
1000AAC
2’ lead length
2’ lead length
Flexible Clamp Adapters
Features
■ Provide safe, easy measurement of high
AC currents
■ Large opening and flexible materials to
wrap around conductors and bus bars
■ Shape Memory allows pre-forming
before installation
■ Extend the current measurement
capabilities of digital multimeters
Specifications
61-330
1000AAC
61-331
300/3000AAC
61-330
61-331
61-332
61-333
61-334
61-436
61-451
AC CURRENT
1000 A
300/3000 A
200 A
500 A
600 A
1000 A
300 A
DC CURRENT
—
—
—
—
600 A
—
—
1mV/A
1mV/A/10mV/A
1mV/A
1mV/A
1mV/A
1mV/A
1mV/A
OUTPUT SIGNAL
MAX CONDUCTOR SIZE
8” (19cm)
8” (19cm)
0.78” (19.8mm)
1.18” (30mm)
SENSOR LENGTH
24” (61cm)
36” (91cm)
—
—
1.125” (28.5mm) 2.25” (57.1mm)
—
—
0.91” (23mm)
—
N12966
Line Splitter
61-561
Line splitter with direct
and 10x sensitivity
1-800-435-0705 for Customer Service
www.idealindustries.com
E-31
Clamp Adapters
■ Provide safe, easy measurement of
Carrying Cases
C-90
Nylon carrying case
for use with all
Vol-Con® and
Vol-Test® Testers
61-020
Premium leather case
for use with voltage
testers
61-010
Leather case for use
with voltage testers
Carrying Cases
C-290
Nylon carrying case
for use with DMM’s
61-445
Small nylon carrying
case with four
convenient pockets
61-447
Large nylon carrying
case with six large
inside pockets and
one zippered outside
pocket
Carrying Case Selection Guide
61-603
61-609
•
•
•
•
•
61-682
61-164
61-165
61-954
61-956
•
•
•
•
61-635
61-602
•
630
61-633
61-495
•
61-614
61-494
•
610
61-610
61-361
•
61-681
•
61-360
•
61-092
•
600 Series
61-354
61-350
•
Nylon Carrying Case
490
61-090
61-324
C-290
360
61-352
61-322
350
61-320
320 Series
MULTIMETER CARRYING CASE
SELECTION GUIDE
•
•
•
•
•
61-179 Nylon Carrying Case
C-50
Nylon Carrying Case
C-90
Nylon Carrying Case
•
•
•
•
•
•
•
•
•
C-954 Hard Carrying Case
C-958 Hard Carrying Case
•
C-760
Carrying Case
C-770
Nylon Carrying Case
E-32
www.idealindustries.com
•
•
•
•
•
61-774
Nylon Carrying Case
770
61-772
Nylon Carrying Case
C-730
•
61-768
C-700
•
61-766
Nylon Carrying Case
760 Series
61-764
C-452
61-736
61-179 Nylon Carrying Case
730
61-732
61-704
61-702
61-701
61-452
700 Series
CLAMP METER CARRYING CASE
SELECTION GUIDE
61-958
•
61-020 Premium Leather Tester Case
61-086
61-076
61-010 Leather Tester Case
61-085
61-065
61-058
Voltage Testers
TESTER CARRYING CASE
SELECTION GUIDE
•
•
•
•
•
•
1-800-435-0705 for Customer Service
Test and Measurement
TL-435
TL-436
Industrial Test Lead Kit
Electrical Test Lead Kit
Kit contains: 1.5m silicone lead set, probes w/SS
tips, rigid alligator clips, flex pincer clips,
insulated alligator clips, insulated spade lugs and
padded zipper pouch, 1000V, 10A rating
Kit contains: 1.5m silicone lead set,
probes w/SS tips, insulated alligator
clips and tri-fold pouch, 1000V, 10A
rating
Accessories
Test Lead Kits
Test Leads
TLF-252
Fused test leads
with alligator clips,
10A/600V,
CAT III - 1000V
TL-104
Test Leads
w/Alligator
Clip
TL-58
Standard Test
Leads
TL-102
TL-100
Silicone Test
Leads
Premium Test
Leads
with alligator
clips
Thermocouples
Features
61-461
■ Measures up to 1500˚ F (816˚ C)
■ K-type thermocouples plug into
digital multimeter or clamp meter
voltage ports with 61-465 adapter
1-800-435-0705 for Customer Service
61-465
Beaded K-type
Thermocouple
Thermocouple Adapter
www.idealindustries.com
E-33
Replacement Parts Selection Guide
•
•
61-772
61-774
•
61-764
61-766
61-768
•
61-732
61-736
61-710
700 Series 710 730 760 Series 770
61-701
61-702
61-704
61-610
61-614
61-605
61-494
61-495
450 490 600 610
61-452
360
61-360
61-361
•
61-354
•
61-350
61-352
61-324
61-320
61-310
61-322
Replacement Parts/Safety
FUSES
F-1
0.5A (250V) 0.25 x 1.25 in.
F-102
1A (600V)
.41 x 1.5 in.
F-103
15A (600V)
.41 x 1.5 in.
F-310
250mA (250V) 5 x 20mm
F-312
500mA (250V) 5 x 20mm
F-314
10A (250V)
5 x 20mm
F-350
10A (500V)
6.35 x 32mm
LA-3893 2A (600V)
6.35 x 25.4mm
LA-3895 0.5A (250V) 5 x 20mm
LA-3896 0.5A (500V) 6.35 x 32mm
LA-3897 10A (600V)
6.35 x 25.4mm
LA-3898 0.1A (250V) 5 x 20mm
BATTERIES
61-201
1.5V (LR44)
—
1.5V (AA)
—
1.5V (AAA)
—
9V
TEST LEADS
TL-34
Leads w/pin connectors
TL-54
Test Leads
TL-58
Standard
TL-100
Premium leads w/alligator clips
TL-102
Silicone test leads
TL-104
Test leads w/alligator clips
RUBBER BOOTS
61-370
360 Series rubber boot
C-92
Pocket-style meters rubber boot
C-320
320 Series rubber boot
C-490
490 Series rubber boot
MISCELLANEOUS
61-565
Magnetic Strap
61-312
61-314
310 Series 320 Series 350 Series
METER REPLACEMENT
PARTS SELECTION GUIDE
• •
•
• •
• •
•
• •
• •
• •
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
• •
• •
•
• •
•
•
•
•
•
•
• •
•
•
•
• •
• •
•
• •
• •
•
•
•
• •
•
•
•
•
•
•
• •
Safety in the Field
The power demands of today’s high-tech world have caused a marked increase in
occurrences and levels of transient overvoltages. The International Electrotechnical
Commission (IEC) has developed a safety standards model for measurement, control
and laboratory use.
Service
Entrance
Meter
Service
Entrance
Category I – The signal level for telecommunications, electronic and other low-energy
equipment with transient-limiting protection. Peak impulse transient range is 600–4,000
volts with a 30 ohm source.
Outbuilding
Meter
Underground Service
Service
Entrance
Transformer Outbuilding
Meter
Underground Service
CAT I
Copiers
• Electronic
equipment
• Low energy
equipment with
transient limiting
protection
E-34
CAT II
Appliances,
PCs, TVs
• Outlets and long
branch equipment
• All outlets at more
than 10m (30 ft)
from Category III
source
• All outlets at more
than 20m (60 ft)
from Category IV
source
CAT III
MC Panels
CAT IV
Exterior
Transformers,
Meters
• Feeders and short
branch circuits
• Distribution
panel devices
• Heavy appliance
outlets with “short”
connections to
service entrance
• Outside and
service entrance
• Service drop from
pole to building
• Overhead line to
detached building
• Underground line
to well pump
www.idealindustries.com
Category II – The local level for fixed and non-fixed powered devices including
appliances, lighting and portable equipment. Outlets located more than 30 feet from
CAT III sources and 60 feet from CAT IV sources. Peak impulse transient range is from
600–6,000 volts with a 12 ohm source.
Category III – The distribution level for fixed primary feeders or branch circuits.
Circuits that are separated from CAT IV sources by at least one level of transformer
isolation. Peak impulse transient range is 600–8,000 volts with a 2 ohm source.
Category IV (proposed) – The primary supply level for the highest levels of transient
overvoltage. Includes the utility service both outside and at the service entrance,
service drop from the pole to the building, overhead line to remote buildings, and
underground line to a well pump. Peak impulse transient range is 600–12,000 volts
with less than a 1 ohm source.
1-800-435-0705 for Customer Service
DataComm
F
LANTEK® 6/6A/7G LAN Cable Certification Testers
LANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family
of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making
channel and permanent link certification of a cable standard such as CAT6a or ISO-F possible without changing adapters. The same
patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the
LANTEK Cable Certification Testers save you money and time on the job.
■ LANTEK 7G 1GHz is the world’s first independently verified Level IV accurate LAN cable certification tester capable of testing installations
up to 1 GHz, exceeding the requirements for CAT6a/7/ISO-F.
■ LANTEK 6A 500MHz is a Level IIIe verified certification tester designed to support the emerging CAT6a Standard to certify LAN cabling to
support applications up to 10G Ethernet.
Testers
■ LANTEK 6 350MHz is a Level III verified LAN certification tester designed to support up to CAT6/ISO-E cabling.
Features of LANTEK® Products
■
High-Performance LANTEK 7G/6A/6 – sweeps
to 1 GHz and supports testing requirements up to
CAT 6/6a/7/ISO-F and beyond
■
Level IV/IIIe/III Accuracy – independently verified
by ETL for baseline, channel and permanent link
■
DUALmode Testing to Save Time – reports
channel and permanent link test results simultaneously
■
Test with Patchcords to Save Money – performs
CAT6A/6/5e/ISO-Ea/E/D testing with standard
patchcords to achieve the lowest cost of ownership
■
Largest Internal/External Memory Capacity –
makes record management easy
■
Convenient FIBERTEK™ Accessory –
simultaneously tests two fibers for attenuation and
length
■
Innovative TRACETEK™ Accessory – performs
advanced fiber fault location and troubleshooting
functions
The only
tester
to sweep
to 1GHz
F-2
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
Kits Include:
LANTEK6B LANTEK6ABAS LANTEK6APREM LANTEK6ATRV LANTEK7GBAS LANTEK7GPREM LANTEK7GTRV
Basic
Basic
Premium
Travel
Basic
Premium
Travel
✔
✔
–
✔
–
–
–
–
–
–
–
–
✔
–
–
✔
–
–
–
–
–
–
–
–
–
–
–
–
2
–
✔
✔
✔
–
2
–
–
4
–
4
✔
✔
✔
✔
✔
✔
4
✔
2
–
4
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Soft Carrying Case
Deluxe Hard Shell Case
Airline Grade Travel Case with Wheels
64MB Compact-Flash Memory Card
Category 6 Universal Adapters & Reference Cables
Category 6a Universal Adapters & Reference Cables
CAT7 (TERA) Adapters & Reference Cables
Batteries
DUAL Bay Rapid Battery Charger
Headsets (2), AC Adapters (2),
Hanging Straps (2), Serial Cable (1),
USB Cable (1), LANTEK Reporter Software (1)
✔
–
✔
✔
✔
–
✔
✔
✔
Note: Delivery content may vary outside of US. Please contact your local IDEAL sales office for details.
The airline grade Travel Case fits in most airline overhead storage compartments.
FEATURES
LANTEK6
Basic
LANTEK6A LANTEK7G
Premium
Frequency Range
350 MHz
500 MHz
Supports CAT7 & ISO-F
Upgradeable Upgradeable
Supports CAT6a
Upgradeable
✔
Support CAT6/5e/3 and ISO-E/D/C
✔
✔
Accuracy Level III/IIIe (Draft)/IV
ETL
ETL
(LANTEK6/6A/7G) verified by
Support DUALmode Testing to
✔
✔
Save Time
Test with Patchcords to Save Money
✔
✔
Screen Display Area
Best
Best
CAT6 Test Storage with Graphs
500
500
Standard External Compact Flash
Option
64MB
Memory
USB/Serial Port
✔
✔
Copper TDR Trace
✔
✔
Fiber Loss Measurement (FIBERTEK)
Option
Option
Fiber Distance to Break (TRACETEK)
Option
Option
Talk over Fiber & Copper
✔
✔
(Full Duplex)
Display Screen on Remote
✔
✔
Troubleshooting Tone Generator
✔
✔
on Remote
External Rapid Battery Charger &
Option
✔
Extra Batteries
1-800-435-0705 for Customer Service
Premium
1 GHz
✔
✔
✔
ETL
✔
✔
Best
500
Other Accessories
LANTEK6/6A/7G
Soft Carry Case
3010-12-0036
Deluxe Hard Carry Case
3010-12-0092
Batteries
1219-00-1604
Serial Cable
6011-50-0031
64 MB CompactFlash Card
2112-27-0605
CompactFlash Card Reader for PC
2112-27-0604
LANTEK CAT 6/5e Channel Adapters (ea.)
0012-00-0629
LANTEK CAT 6a/6/5e Channel Adapters (ea.)
0012-00-0656
LANTEK CAT 6a/6/5e Reference Patchcords (ea.)
6011-50-0029
Talkset (2)
3010-70-0015
64MB
User Manual
6510-00-5000
✔
✔
Option
Option
Dual Bay Battery Charger
0012-00-0642
LANTEK CAT 7 TERA Testing Kit
1019-00-1105
LANTEK CAT 7 NEXANS Testing Kit
1019-00-1110
Coax Testing Adapter Kit
1019-00-0343
✔
110 Block Testing Adapter Kit
1019-00-1112
✔
BIX Block Testing Adapter Kit
1019-00-1114
✔
66 Block Testing Adapter Kit
1019-00-1115
✔
www.idealindustries.com
F-3
Testers
PACKAGE AND ACCESSORIES
Selector Sales Guide
LAN Testers/Certifiers - Capabilities
LANTEK6B
LANTEK6ABAS
LANTEK6APREM
LANTEK6ATRV
LANTEK7GBAS
LANTEK7GPREM
LANTEK7GTRV
1000 MHz
Frequency Range
350 MHz
500 MHz
500 MHz
500 MHz
1000 MHz
1000 MHz
CAT 7/ISO F (600+MHz)
Upgradeable
Upgradeable
Upgradeable
Upgradeable
Incl.
Incl.
Incl.
CAT 6a (500MHz)
Upgradable
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Selector Guide
CAT 6
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
CAT 5e
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
CAT 5
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
CAT 3
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
COAX Testing
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Color Screen
Yes (Brightest)
Yes (Brightest)
Yes (Brightest)
Yes (Brightest)
Yes (Brightest)
Yes (Brightest)
Yes (Brightest)
Screen on Remote
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Internal Memory
Internal Memory
(# of tests - no graphs)
500
500
500
500
500
500
500
Compact Flast
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
(# of Cat 6 tests with graphs)
External Memory ( 64 MB compact flash card)
Option
Option
Incl.
Incl.
Option
Incl.
Incl.
USB Port (Fastest method for uploading tests)
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Serial Port
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Copper Trace (TDR)
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Fiber Trace (TRACETEK for finding fiber cable faults)
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Fiber Loss Measurement
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Fiber Length Measurement
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Talk over Fiber (full duplex with FIBERTEK option)
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Yes w/option
Talk over Copper (full duplex)
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Adapters (Patented)
Fits within
Fits within
Fits within
Fits within
Fits within
Fits within
Fits within
Autotest w/ Standard Patchcords
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Autotest Button also on remote
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Trade Price (Best Price Performance)
LAN Testers/Certifiers Accessories (included or optional)
Soft Carry Case
$5,495
LANTEK6B
Incl.
$6,695
LANTEK6ABAS
Incl.
$7,495
LANTEK6APREM
Option
$7,695
LANTEK6ATRV
Option
$7,495
LANTEK7GBAS
Incl.
$8,495
LANTEK7GPREM
Option
$8,695
LANTEK7GTRV
Option
Deluxe Hard Carry Case (3010-12-0092)
Option
Option
Incl.
Option
Option
Incl.
Option
Wheeled Travel Case (3010-12-0105)
Option
Option
Option
Incl.
Option
Option
Incl.
Display Unit
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Remote Unit
Incl.
Incl.
Incl.
Incl.
Incl.
(2)
1219-00-1604
(2)
1219-00-1604
(4)
1219-00-1604
(4)
1219-00-1604
(2)
1219-00-1604
Option
Option
Incl.
Incl.
Option
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Batteries
(Part #s are for (1) battery) (All models include (2) batteries
except for LANTEK PREM/TRV packages which include (4) batteries.
Incl.
(4)
Incl.
1219-(4)
00-1604
121900-1604
Dual Bay Battery Charger
(P/N for LT8XXX series is
LT8BTCHG120, P/N for LANTEK is 0012-00-0642)
Hanging Straps (pair)
LT-Record Manager Software
-
-
-
-
-
-
-
LANTEK Reporter Software
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Serial Cable
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
USB Cable (fast port for uploading tests results)
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
Incl.
PCMCIA Adapter
Option
Option
Incl.
Incl.
Option
Incl.
Incl.
64 MB CompactFlash Card
Option
Option
Incl.
Incl.
Option
Incl.
Incl.
USB Port Flash Card Reader for PC
Option
Option
Incl.
Incl.
Option
Incl.
Incl.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Not Req'd
CAT5/5e Basic Link Adapter (1 pair incl.)
Part # is a pair
CAT5/5e Channel Link Adapter (1 pair incl.)
CAT 6 Cable Adapters
Part # is a pair
(vendor specific and sold as a pair)
Calibration Adapter (LANTEK series utilizes CAT 6/5e channel
Not Req'd
Not Req'd
Not Req'd
Not Req'd
Not Req'd
Not Req'd
CAT 6/5e Universal Adapter (0012-00-0629) each
2
-
-
-
-
-
-
CAT 6a/6/5e Reference Patchcord
2
2
2
2
2
2
2
adapter)
Part # is for a pair
CAT 6a Universal Adapter (0012-00-0656) each
-
2
2
2
2
2
2
CAT 7 Channel Adapter "Option"
-
-
-
-
0012-00-0628
0012-00-0628
0012-00-0628
-
-
-
-
6011-50-0027
6011-50-0027
6011-50-0027
Part # is for one
CAT 7 TERA Patchcords "Option"
COAX "Options"
P/N is for a pair
[LT series requires (2) adapters, LANTEK series
(1) Kit]
AC adapters (2 incl.)
Headset (1 pair incl.)
1019-00-1510 = 1
Both part #s are for a pair
User Manual - CD-Rom
Quick Start Guide & Registration Card
F-4
www.idealindustries.com
1019-00-0343
1019-00-0343
1019-00-0343
1019-00-0343
1019-00-0343
1019-00-0343
1019-00-0343
1019-00-1510
1019-00-1510
1019-00-1510
1019-00-1510
1019-00-1510
1019-00-1510
1019-00-1510
3010-70-0015
3010-70-0015
3010-70-0015
3010-70-0015
3010-70-0015
3010-70-0015
3010-70-0015
Incl.
Incl.
Incl.
6510-00-5000
6510-00-5000
6510-00-5000
6510-00-5000
-
-
-
-
-
-
-
1-800-435-0705 for Customer Service
DataComm Equipment
Features of FIBERTEK™ Products
■ Measures signal loss and length
■ 850nm VCSEL light source enables
Gigabit Ethernet certification
on Multimode fiber
■ Enables bi-directional, dual
wavelength measurements
■ Full duplex talkset capability
■ Provides easy switching of LANTEK®
Cable Tester between Copper and Fiber LAN testing
■ Separate loopback testing method for high precision length
■ Outstanding Temperature Compensation provides highly accurate
test results in a wide variety of environments
SIGNALTEK™ provides a
technically innovative method
to test and document
performance of voice, data,
video, and VoIP applications
for cabling installers and
network technicians. It
tests the link's ability to support
applications by transmitting
Ethernet packets on the wire
and measuring the link
performance according to
IEEE 802.3ab Gigabit Ethernet
standard. By monitoring
transmitted and received
data packets, it can report the
BERT (Bit Error Rate Test) for the link.
It uses the latest generation of Gigabit Ethernet technology to provide
the best performance to this new class of testers.
FIBERTEKMMP Multimode Fiber Testing Premium Kit
Features of SIGNALTEK™
■ All of the features of the FIBERTEKMMB plus TRACETEKMM
(below):
FIBERTEKSMP Singlemode Fiber Testing Premium Kit
■ Unique - User selectable 10/100/1000 Bit Error Rate Testing
(BERT) to ensure performance for all Ethernet devices
■ All of the features of the FIBERTEKSMB Plus TRACETEKSM
(below):
■ Unique - Smart autotest function detects line condition and
automatically chooses appropriate test to run to allow testing
cable that is terminated with a SIGNALTEK remote, a network
device, or unterminated
Features of TRACETEK™ Products
■ Enables LANTEK® certification testers to provide an event trace
at a fraction of the price of an OTDR
■ Provides easy switching of LANTEK® certification tester between
FIBERTEK™ loss and length measurement and TRACETEK™
■ Includes event plots that pinpoint significant losses along the fiber
✔
✔
✔
FIBERTEK – 1310nm SM Adapter
✔ ✔
✔
✔
FIBERTEK – 1550nm SM Adapter
✔ ✔
✔
✔
✔
TRACETKEK – 1300nm MM Adapter
✔
✔
TRACETKEK – 1310NM SM Adapter
Fiber Cleaning Starter Kit
✔
✔
62.5/50µm, MM, ST-ST Cable Kit
✔
✔
62.5/50µm, MM, FC-ST/FC-SC Cable Kit
9µm, SM, FC-ST Cable Kit
9µm, SM, FC-ST/FC-SC Cable Kit
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
■ Unique - Get maximum coverage with a full two year
warranty
■ Unique - Configure multiple target IP addresses for pinging
several network devices to ensure communications with
servers, printers, IP cameras, home automation controls, etc.
■ Offers network interrogation tools such as link establishment,
port LED blink and ping
■ Exceeds 100m measurement distance required by IEE
802.3ab gigabit Ethernet standard
✔
✔
✔
TRACETEKSM
FIBERTEKALLP
✔
✔
TRACETEKMM
FIBERTEKALLB
✔
✔
FIBERTEKSMP
FIBERTEKMMP
✔
FIBERTEK – 1300nm MM Adapter
FIBERTEKSMB
FIBERTEKMMB
FIBERTEK – 850nm MM Adapter
■ Unique - Save time using the remote to perform 10/100 or
gigabit service detection AND initiate an Autotest when main
unit is connected
■ Unique - Maximum flexibility with two USB ports. Connect
to a computer to upload test results, connect directly to a
printer, or connect a USB memory drive for unlimited storage
■ Provided with launch cable and appropriate connectors
FIBERTEK/TRACETEK PACKAGES
■ Unique - Simulate real world network traffic with full-duplex
gigabit performance testing
✔
✔
✔
■ Multiple BERT configurations for VoIP, data, and video-overIP specific testing
✔
✔
■ Easy to read Pass/Fail performance reports that can be
stored and printed for customer documentation
✔
■ Brilliant high-resolution color display visible in any lighting
condition
■ Uses readily available AA batteries
■ Wiremap faults easily with selectable 568 A/B color coding
See your IDEAL representative for additional
specifications on all certification products.
1-800-435-0705 for Customer Service
■ TDR to accurately measure length and locate shorts and
opens
www.idealindustries.com
F-5
Testers
SIGNALTEK™ Cable Performance Tester
FIBERTEK™ and TRACETEK™
Advanced Fiber Test Options
SIGNALTEK™ Cable Performance Tester
SIGNALTEK™-FO Multimedia
Qualification Tester
SIGNALTEK™ Specifications
Cable Types
■ Voice/phone cable - USOC/RJ-11/RJ-12 interface
■ Data Cable - STP/UTP (RJ-45) for CAT 3/5e/6/6a/7 cabling
■ Coax cable - via RJ-45 to F Patchcord, series 6, 59, 58 cabling
(50/75 Ohm)
Battery Life: Standard AA Alkaline batteries
SIGNALTEK-FO is the first Qualification
tester that offers both copper and fiber
optic testing; and SIGNALTEK-FO does
it for less than the price of an Optical
Test Set alone.
■ Fiber Optic and Copper Gigabit
Qualification – Qualify copper and
fiber-optic cabling to IEEE 802.3
standards
■ Stand by - 90 days
Testers
■ Cable testing - 30 hours
■ Multimedia Gigabit Qualification
■ Network monitoring - 4 hours
(Multimode and Single Mode
capability) – Qualify short and long
range cabling to a distance of up
to 10km
Physical Dimensions
■ Display handset: 7.9” L x 3.6” W x 1.5” D
■ Remote handset: 6.8” L x 3.5” W x 1.5” D
■ BERT and Optical Attenuation
Measurements – Perform Bit Error Rate
Testing and decibel (dB) loss
measurements of optical links.
■ Near-end Weight: 12.5 oz.
Ports/Connections
■ RJ-45 test interface port
■ Dual Wavelength Capability – available in
N EW
both 850nm and 1300mn wavelengths to
support virtually all LAN and campus fiber
applications.
■ Mini USB “A” port
■ Standard USB “B” port
■ DC power input for long-term network monitoring
■ Small Form factor Pluggable (SFP) modules are compact,
light-weight and field changeable.
■ Storage and Reporting for Thousands of Reports – Store and print
Qualification reports for copper and fiber jobs using internal
memory or USB “thumb-drives”.
Description
SIGNALTEK™ Kit
Universal 120-240V Power Adapter
RJ-45 to 8 Head Alligator Clip
Replacement Cable Accessory Kit - contains all original
cables in SIGNALTEK™ Kit
#33-974
F-6
Cat. No.
Description
Cat. No.
33-974
SIGNALTEK™-FO w/850 Modules
33-981
4010-00-0136
SINGALTEK™-FO w/13X0 Modules
33-982
SIGNALTEK™-FO w/850 & 13X0 Modules
33-983
SIGNALTEK™-FO w/o Modules (Fiber-Ready)
33-987
K-7920
1019-00-1112
#33-983
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
LinkMaster™ PRO and LinkMaster™ PRO XL Testers
Features
Description
LinkMaster™
PRO
LinkMaster™
PRO XL
Blinks the hub
■
Displays length measurement with test results
■
Remotes have both RJ-11 and RJ-45 jacks
■
■
Backlight LCD screen
Measures length on UTP, STP and coax
■
■
Tests UTP for shorts, opens, miswires, reversals,
split pairs and shield continuity
■
■
Test coax for opens, shorts and continuity
■
■
Shows wiring errors
■
■
Tests and identifies with all eight twisted pair
and coax remotes
■
■
Sends tone with four different signals
■
■
Displays test results in wire map format
■
■
Snap-off battery cap
■
■
9 volt battery included
■
■
Remote Jack for Patch Cords
Main Jack for all Testing
Larger Backlit LCD
Screen
Six Modes of Operation
• Cable Test
• Hub Blink
• Tone
• Length
• Coax
• Setup Mode
LAN Cable Testers
The LinkMaster™ PRO & LinkMaster™ PRO XL Testers enable
installers, contractors and maintenance technicians to map, test and
troubleshoot data and voice communication cable and coax runs.
Rugged, versatile, and easy-to-use, they have mastered the link
between performance, simplicity and value for both commercial and
residential applications.
Press SEL to:
• Turn on back-light (Hold 2 sec)
• Execute current displayed mode
• Start new test cycle
• Select one of four tones
• Change pair being measured
for length
• Change user selectable options
– Beep On/Off
– Unshielded or Shielded Cable
– Units—Feet or Meters
Arrow Keys
• To change length constant
(see chart for required parameters)
• To change pair or pin selection for tone
• To scroll through setup selectable options
Kits and Accessories
Description
Cat. No.
LinkMaster™ PRO XL Kit w/eight remotes
33-880
LinkMaster™ PRO XL Kit w/eight remotes & ABS™ Tester
33-881
LinkMaster™ PRO XL Kit w/eight remotes (international packaging)
33-886
LinkMaster™ PRO XL Economy Kit w/one remote
33-887
LinkMaster™ PRO Kit w/eight remotes - Unshielded jumper cables
33-825
LinkMaster™ PRO Kit w/eight remotes - Shielded jumper cables
33-826
LinkMaster™ PRO Economy Kit w/one remote - Unshielded
jumper cables
33-835
LinkMaster™ PRO Economy Kit w/one remote - Unshielded
jumper cables
33-836
RJ-45 to RJ-11 jack adapter (2/card) POP Packaging
LA-4233
RJ-45 to F-connector adapter (2/card) POP Packaging
LA-4234
LinkMaster™ PRO XL remotes UTP/STP 2-8 only (white carton)
LA-4235
LinkMaster™ PRO XL large replacement case
H-3412
Security Kit - 8-position modular adapter and eight RJ-45 to
alligator clip lead sets
LA-4157
BNC Accessory Kit
LA-4173
Set of eight color-coded F-terminators for LinkMaster™ PRO or PRO XL
LA-4159
LinkMaster™ PRO large replacement case
H-3324
Replacement economy kit case
IA-4868
#33-880
#33-887
#33-825
#33-835
1-800-435-0705 for Customer Service
www.idealindustries.com
F-7
SecuriTEST™ CCTV/Security Tester
N EW
CCTV installers often need to carry a variety of testing tools to complete
their work. SecuriTEST combines the most-needed tools in one
easy-to-carry package. Since all connections (video/communications/DMM)
attach to a single unit, SecuriTEST eliminates the need to juggle several devices
while on a ladder or lift, making working conditions safer and increasing productivity.
LED Indicators
Main Power Switch
■ Six Essential CCTV Tools – Combines a CCTV video tester, PTZ camera
controller, Digital Multi-Meter, UTP cable tester, video test pattern generator
and PTZ protocol analyzer in a single compact package.
■ Save Time & Money – Test, aim and focus cameras when working alone and
Testers
save time by not having to walk back to the control center to verify functionality
of each camera.
■ Compact Design – Combines all the most needed—security tools in a
lightweight, easy-to-carry unit with a sharp, bright 2.5in (6.3cm) color LCD
screen with on-screen displays
for PTZ control/diagnostics and
DMM readouts.
PTZ Control Pad
Test Lead Ports
■ PTZ Protocol Analyzer –
Compatible with over a dozen
PTZ protocols to test and
program cameras in the field.
Decodes and identifies output
from PTZ console to aid in
troubleshooting.
Carrying Case
Description
Cat. No.
SecuriTEST™ CCTV/Security Tester only
33-891
SecuriTEST™ Tester Pouch only
62-891
Includes: Rechargeable batteries,
AC charger, car charger, test leads,
wiremap terminator, neck strap and
manual.
VDV MultiMedia Cable Tester
Easy-to-use tester for installers working with
voice, data and video applications. One tester
for all applications!
■ Voice — supports 3-pair USOC and
Integrated RJ11/12
(phone), RJ45 (UTP/STP)
and Coax (F-Connector)
interfaces on top of the
unit
6-position RJ-11/12 jacks for telephone
cable testing
Large LCD displays user
current test mode, test
results and all faults for the
various cable types.
Display automatically warns
of voltage on lines and
shows a Pass or Miswire
message after each test.
■ Data — supports both shielded and
unshielded cable testing to T568A/B
(RJ-45)
■ Video — tests coax cable for opens and
shorts with F-connector interface
■ Tests for opens, shorts, miswires, reversals
and split pairs. Also indicates correct wiremap.
Has automatic shut off (to prolong battery life)
and low battery indicator.
Compact ergonomic design
puts full-featured VDV
functionality in the
palm of your hand.
A single button push
immediately selects between
VOICE, DATA or VIDEO
testing functions.
■ Easy to read LCD display with “PASS/FAIL”
indicator after each test
■ Tone generator supports 4 different tones
making fault isolation easier
■ One remote wiremap and testing unit is stored
inside tester— easier to keep all parts together
■ Uniquely designed remote accommodates
RJ-11, RJ-45 and F-style connectors
Detachable remote with
RJ11/12, RJ45 and
Coax (F-Connector)
interfaces.
Stores securely in the
base of the main unit for
ready availability and
easy patch cable testing.
Description
Cat. No.
Kit with integrated remote and accessories
33-856
F-8
www.idealindustries.com
Remote ID number (flashing)
or “S” for shielded (flashing).
Pressing the TONE button
starts “Instant-On” tone
generator in the VOICE,
DATA or VIDEO mode.
1-800-435-0705 for Customer Service
DataComm Equipment
Amplifier Probe and Tone Generator
62-164
62-160
ABS™ Tester & ABS™ Signal Thrower™
62-180
62-184
Amplifier Probe
■ Identifies and traces wire or cables within a group
■ Battery low indicator
Testers
■ Battery cap allows quick and easy battery replacement
ABS™ Tester
Tone Generator
■ Amplifier probe with telephone troubleshooting capabilities
■ Emits three different types of tones
■ Tone TRACE feature detects tone signal
■ Auto-off after three hours of non-use
■ Receives and reproduces telephone system dial tone
■ Tone can be added in any status
■ Indicates call addressing for correct telephone number
Description
Cat. No.
Amplifier Probe
62-164
Tone Generator
62-160
Amplifier Probe and Tone Generator Kits
■ Polarity indicator tests for correct wiring and power
ABS™ Signal Thrower™
■ Works with the ABS™ Tester to locate and identify cables
■ Emits three different types of signals
■ Auto-off after 3 hours of non-use
33-864
Description
Cat. No.
ABS™ Tester
62-180
ABS™ Signal Thrower™
62-184
33-862
Kits include: Amplifier Probe, Tone Generator, Lead Set, Cable
Assembly and flat tip
Description
Cat. No
Kit in soft black pouch
33-864
Kit in hard gray case
33-862
ABS™ Tester & ABS™ Signal Thrower™ Kits
33-854
Replacement Tips (Standard & Flat)
Description
Cat. No
Standard Tip
LA-4145
Flat Tip
LA-4144
33-852
TRACETone™ Tone Generator &
Amplifier Probe
62-188
■ Test continuity and locate signal
of installed wire and cable
Kits include: ABS™ Tester, ABS™ Signal Thrower™, Lead Set and
Cable Assembly
■ Two selectable tone styles
Description
Cat. No.
Kit in soft black pouch
33-854
■ Extra-deep serrations grips wire better
Kit in hard gray case
33-852
■ RJ-11 Alligator Clip, RJ-11 Cable Assembly included
Kit on blister card
62-188
■ Tone Generator & Amplifier
Probe fit together for easy storage
Description
Cat. No.
TRACETone™ Tester and Accessories
62-140
1-800-435-0705 for Customer Service
www.idealindustries.com
F-9
Modular Adapters
Telemaster™ Telephone Tools
Smart6™ Modular Tester
■ For paired conductors
■ 6-position Tester
■ Incoming call identification
■ Multi-function telephone
tool cuts, strips and crimps
for easy one-tool application
■ Steel frame for long-term durability. (Crimps primary modular
plug strain relief only)
62-096
Data8™ Modular Adapter
■ 8-position Adapter
■ High-performance jack
■ Internal circuit design to reduce
Testers/Tools
62-098
attentuation, coupling, NEXT
Description
Cat. No.
Description
Kit
Cat. No.
Tool Only
Cat. No.
Tool for RJ-11 (1, 2, 3 pair) and RJ-45 (4 pair) Plugs
33-700*
30-496
Tool for RJ-45 (4 pair) & DECconnect MMJ (RJ-11, 3 pair)
N/A
30-497
N/A
30-498
Smart6™ Modular Tester
62-096
Tool for RJ-11 (1, 2, 3 pair) & DECconnect MMJ
(RJ-11, 3 pair)
Data8™ Modular Adapter
62-098
Tool for RJ-22 (handset) and RJ-11 (1, 2, 3 pair)
N/A
30-499
Replacement Cut and Strip Blade Set for Telemaster™
N/A
LB-1747
LinkMaster™ Tester
Kit includes 10 each, RJ-11 and RJ-45 plugs
Tests wiring configurations on UTP/
STP cables. Checks for shorts,
miswires, reversals and split pairs.
Debug feature, automatic shut-off
and low battery LED indication.
Punch Down Tools
■ Designed to test installed
twisted pair wiring
Wor
k
on Cs Grea
C ab AT 56 t
ling
■ Tests unshielded and shielded
modular plugs
35-492
35-485
■ Main unit and remote allow one person testing
Description
Cat. No.
LinkMaster™ Tester and Remote
62-200
35-185
Impact Turn-Lock™ Punch Down Tools
Cat. No.
Punchmaster™ II Punch Down Tool - body only
35-483
Punchmaster™ II Punch Down Tool w/110 blade
35-485
■ For paired conductors
Punchmaster™ II Punch Down Tool w/66 blade
35-487
■ Ratchet version of
popular Telemaster™
Tool for RJ-45 and
RJ-11 modular plugs
Non-Impact Turn-Lock™ Punch Down Tools
Cat. No.
Punch Down Tool - body only
35-491
Punch Down Tool w/110 blade
35-492
■ Repeatable crimp action
for consistent, high quality
connections
Punch Down Tool w/66 blade
35-493
Economy Punch Down Tool
Cat. No.
Ratchet Telemaster™
New cushion-grip
handles
Non-impact Tool w/permanent non-cut blade
35-185
Description
Cat. No.
Removable Blades*
Cat. No.
Ratchet Telemaster™
30-696
110 Turn-Lock™ blade
35-495
66 Turn-Lock blade
35-497
110/66 combo blade w/cutting edges
35-407
Krone blade
35-478
Bix® blade
35-479
Modular Plug Tool Kit
®
■ Multi-function telephone/
network tool; cuts, strips
and crimps
*Not applicable for Economy Punch Down tool.
Bix® is a registered trademark of Nortel. Krone® is a registered trademark of Krone, Inc.
■ Steel frame construction
for durability
■ Interchangeable dies allow
for crimping RJ-45 and RJ-11
modular plugs
■ Tool-less die change for added convenience
■ Spring return handle for comfort
Description
Cat. No.
Modular Plug Tool Kit
33-296
F-10
www.idealindustries.com
35-495
110 Blade
35-497
66 Blade
35-407
110/66 Blade
35-478
Krone® Blade
35-479
Bix® Blade
1-800-435-0705 for Customer Service
DataComm Equipment
Data T®-Cutter
Lever™ -Snips Electrician’s Scissors
with Stripping Notches
■ Cuts round communication
cable and maintains cable
geometry for better cable
performance
■ Ergonomic design gives
added leverage
■ Spring-action,
■ Cuts multi-pair cable up
to .500 in. (12.7mm) and
coaxial cable up to RG-9/U
mechanical advantage
increases stripping
leverage and reduces
operator fatigue
■ Suitable for soft cables
(not ACSR)
■ Double plated for added rust protection
■ Locking latch keeps tool closed in pouch
Description
Cat. No.
Electrician’s Scissors with Stripping Notches
35-087
■ Data T -Cutter II designed for RG-58 and RG-6 coaxial cable
®
Description
Cat. No.
Data T®-Cutter
45-074
Data T®-Cutter II
45-075
Cable Splicing Kit
D-Sub/Double-D Service Tool
35-093
■ Exact replacement of the AMP openbarrel service tool for stamped
contacts and D-Sub contacts
■ Also crimps
Double-D, high
density, miniature
contacts
Description
Cat. No.
Cable Splicing Kit (Scissors, Splicing Knife, Leather Holder)
Leather Holder only for Scissors and Knife
35-093
35-094
Electrician’s Scissors
35-090
Holder
Only
■ Includes openings for crimping insulated terminals and cutters for
machine screws
Description
Cat. No.
D-Sub/Double-D Service Tool
30-426
Economy Round Cable
and Wire Cutter
35-089
■ Designed for use in telephone and electrical service applications
■ Cut up to 16 AWG solid and 12 AWG stranded wire
■ Serrated surface on back blade edge cleans wire
■ Cuts multi-conductor cable
up to .500 in. (12.7mm)
and solid or stranded
wire up to
#8 AWG (10mm2)
■ Electrician’s Scissors with stripping notches strip
19 and 23 AWG wire
■ Built-in return spring, locking latch
■ Stamped, hardened steel frame with curved cutting blades
Description
Cat. No.
Multi Conductor Cable to .500 in. (12.7mm)
Solid or Stranded
35-051
Description
Cat. No.
Electrician’s Scissors w/stripping notches
Electrician’s Scissors
Leather Scissors Holder Only
35-088
35-089
35-090
Cable Splicing Knife
Center Conductor Cutter
■ High carbon steel blade remains sharp
and cuts easily through many
insulation types
■ Trims coax center conductor to
3/16 in. (4.8 mm) length for
proper installation into a dual
crimp coax connector.
■ Comfortable, full size, no slip handle
for easy use
Description
Cat. No.
Center Conductor Cutter
35-060
1-800-435-0705 for Customer Service
35-088
Description
Cat. No.
Cable Splicing Knife and Leather Holder
Leather Knife Holder Only
35-091
35-092
www.idealindustries.com
F-11
Tools
■ Extra-deep serrations grips wire better
■ Steel reinforced center
conductors can be trimmed
with bolt cutting holes
Coax/UTP Cable Stripper
Coax Strippers
■ Features a primary and
secondary strip cartridge
■ Specific adjustments
needed for each cable
size
■ Strips UTP, RG-59 and
RG-6 coax cable
■ Rotates easily around finger
Description
■ Push-on ring for easy
connector termination
Coax Stripper - 3 Step
• For crimp BNC and TNC conn.
• Strips braid 0.240 in. or 6mm and
Dielectric 0.240 in. or 6mm
N EW
Description
Cat. No.
Coax/UTP Cable Stripper
45-603
Strippers
Coax Stripmaster® Wire Strippers
■ Spring-action operation grips and strips in one
motion
■ Knife-type blades feature multiple hole diameters
sized for two step removal of outer jacket
insulation and center conductor
Coax Stripper - 3 Step
• For dual crimp BNC/TNC and Thinnet BNC conn.
• For 735A Belden® cable
• Strips braid 0.328 in. or 8.2mm and
dielectric 0.109 in. or 2.7mm
45-523
(Brown)
45-524
(Blue)
Repl. Blade
Cat. No.
Cat. No.
Coax Stripmaster® for RG-6
RG-6
LB-740
45-262
Coax Stripmaster® for RG-59
RG-59
LB-743
45-265
RG-6
Quad Shield
LA-3953
45-282
45-520
45-521
45-526
■ Strips Cat 3, 5, 5e & 6 cables
■ One step stripping
Description
Cat. No.
UTP Cable Stripper
45-167
Coax Cable Stripper
Cyclops® Data Cable Stripper
■ For RG-6, RG-6 Quad and RG-59
■ No adjustment required
■ Strips center conductor and
cable jacket
■ Fast, easy removal of outer sheath
insulations (PVC and Plenum types,
UTP & STP)
Description
Cat. No.
Coax Cable Stripper
45-320
Coax Connector Kit w/four Push-On F-Connectors
33-320
Description
Cat. No.
Data Cable Stripper for unshielded and shielded twisted pair cable
45-514
UTP/STP/Coaxial Cable Strippers
■ Adjustable blades can
be set for any depth
to help ensure nick-free
strips
Toggle® Coax Strippers
■ Toggle® Tools for stripping Ethernet,
Thinnet, RG-62 or RG-59 coax cable
and other cable sizes
Description
Coax Stripper for RG-8/11U
Coax Stripper for RG-6
Cat. No.
UTP Cable Stripper
Coax Cable
Type (RGU)
Coax Stripmaster® for RG-6
Quad Shield
45-522
(Black)
Coax Stripper - 2 Step
• For F-Type, many single crimp BNC/TNC's,
Twist-on BNC/TNC's, Twinax and UHF conn.
• Strips 0.250 in. or 6.35mm
■ Speeds 2-step cable stripping
Description
Replacement
Cassette
Cat. No.
45-510
45-513
Typical
RG Cables
Cat. No.
RG-174,
RG-187
45-162
(Gray)
Coaxial Cable Stripper,
1/8 in. (3.2mm) to 7/32 in. (5.556mm) O.D.
RG-58,CB
Antenna Cable
45-163
(Blue)
Coaxial Cable Stripper, 1/4 in. (6.4mm) to
9/16 in. (14.3mm) O.D.
RG-11, RG-8
45-164
(Blue)
Cable Stripper, 3/16 in. (4.8mm) to 5/16 in.
(8mm) O.D.
RG-59,
UTP Cable
45-165
(Black)
__
L-9225
Description
Coaxial Cable Stripper,
up to 1/8 in. (3.2mm) O.D
Replacement Blade Set* for 45-162,
45-163, 45-165
Replacement Blade Set* for 45-164
__
L-9226
*A set of blades consists of three straight blades and one round blade.
F-12
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
Coax Strip and Crimp Tool
Round Cable Slitting and Ringing Tool
■ Precision, form-ground stripping
holes remove outer jacket
and insulation from
RG-59 and RG-6
coaxial cable
■ Cuts around cable jacket as well as
slits the length of jacket for
easy removal
■ Use with single or multiple
conductor cable up to
1.75 in. O.D.
■ Durable blades cut
copper-coated steel
conductors
■ Blade adjusts for jacket thicknesses up to .125 in.
■ Spare blade in handle base
Description
■ Cushioned, comfort-grip handles
Description
Cat. No.
Coax Strip & Crimp Tool
30-433
Coax Strip & Crimp Tool Kit w/ten RG-6 F-Connectors
30-433F
Cat. No.
Round Cable Slitting and Ringing Tool
45-144
Replacement Blades for 45-144 (2/pkg.)
LB-1748
Crimpmaster™ Crimp Tools & Die Sets
Dies change quickly and easily
with a screwdriver.
Interchangeable dies provide
versatility in a single tool
Coaxial Termination
Description
Crimp release provides
operator safety
Ratchet crimp action
provides repeatable and
Pressure adjustment reliable terminations
for actuation force
New cushion-grip
handles
High quality ratchet-type crimp tool for electricians, contractors and
installers who require guaranteed repeatability of good mechanical
and electrical connections.
Paired Conductor Termination
Description
Tool
Cat. No.
Replacement
Die Set
Cat. No.
Crimpmaster™ Crimp Tool Frame
30-506
—
RJ-45 Eight-position Crimp Tool
for AMP RJ-45 modular plugs
30-521
30-560
RJ-45 Eight-position Crimp Tool
for keyed or non-keyed modular plugs
30-522
30-559
RJ-11 Crimp Tool for two, four or
six-position modular plugs
—
30-556
RJ-11 Crimp Tool for DEC MMJ
six-position modular plugs with an
off-set release tab
30-525
30-558
Crimpmaster™ Handset Die for
four-position handset modular plugs
30-526
30-565
1-800-435-0705 for Customer Service
22-10 AWG (.324mm2 - 5.261mm2)
fully insulated slide-on connectors
Large gauge sound cable
Insulated Terminal Crimp Tool
with built-in locator
22-12 AWG (.324mm2 - 3.31mm2)
Non-insulated open barrel
crimp style connectors
RG-58, 59, 62 Non-plenum Cambridge
BNC/TNC connectors
RG-8/11, RG-213, RG-216 Ethernet Thickwire,
N-Series type plugs and jacks
RG-9, Belden® 8281® and RG-6 Cable,
50 & 75 Ohm
RG-58 and RG-174 cable for 50 and
75 Ohm cables
RG-174 Mini-59 Hex BNC/TNC
coax connector
RG-58 and RG-59 Plenum cables,
Thinwire PVC Hex
16-26 AWG (1.31mm2 - 1.28mm2)
Miniature insulated rings and splices
SMA or SFR-Type fiber optic connectors
22-10 AWG (.324mm2 - 5.261mm2)
Insulated ring tongue terminals and splices
22-8 AWG (.3mm2 - 8mm2)
Non-insulated terminals and splices
RG-58 RG-59/62AU BNC/TNC
3-Piece Hex type connectors
CATV RG-59 and RG-6
Captive Ring F-connectors
SMA or SFR-Type Hex fiber optic connectors
Tool
Cat. No.
Replacement
Die Set
Cat. No.
—
30-594
30-478
—
30-479
—
—
30-586
30-481
30-573
30-482
30-577
30-483
30-578
—
30-587
30-485
30-576
—
30-591
—
30-572
30-490
30-597
30-500
30-579
—
30-580
30-502
30-581
30-503
30-582
30-489
30-596
www.idealindustries.com
F-13
Tools
■ Three crimping nests for crimping F-connectors and ring terminals
Crimpmaster™ Crimp Tool Replacement Die Sets
30-570
30-582
RG-6, RG-174, Belden-Type
RG-8281 cables (Hex. 0.324
(8.23 mm), 0.178 (4.52 mm),
0.068 (1.73 mm)
F-type CATV RG-59, RG-6
Connectors (Hex, 0.350 (8.89 mm),
0.320 (8.13 mm), 0.255 6.48 mm)
Tool w/die 30-503
Tool w/die N/A
30-586
30-572
Tools/Die Sets
16-26 AWG (1.31 mm2 - .128 mm2)
miniature insulated rings, spade
and butt splices
22-12 AWG (.324 mm2 - 3.31 mm2)
Non Insulated Open Barrel
Connectors, Commercial Type
30-587
30-573
Cambridge CP-88, CP-89 BNC/
TNC coax connectors with RG-58,
RG-59/62 AU cables (Hex 0.305
(7.75 mm), 0.068 (1.73 mm),
0.228 (5.79 mm)
Tool w/die 30-481
30-576
RG-174, Mini 59 BNC/TNC
Connectors (Hex, 0.178 (4.52 mm),
0.128 (3.25 mm), 0.068 (1.73 mm)
Tool w/die 30-485
30-577
RG-58, RG-174 and RG-8218
for both 50 and 75 ohm cables
(Hex 0.213 (5.41 mm), 0.178
(4.52 mm), 0.068 (1.73 mm),
0.042 (1.07 mm)
30-591
Plenum and Non-Plenum Thinwire
Cables RG-58 and 59 (Hex, 0.213
(5.41 mm), 0.190 (4.83 mm), 0.068
(1.73 mm), 0.042 (1.07 mm)
30-593
N-Series and RG-8/11 Connectors
(Hex, 0.429 (10.90 mm), 0.100
(2.54 mm), 0.080 (2.03 mm)
Mini UHF and BNC/TNC 5 cavity
(Hex, 0.052 (1.32 mm), 0.068
(1.73 mm), 0.100 (2.54 mm), 0.213
(5.41 mm), 0.255 (6.48 mm)
Tool w/die 30-482
Tool w/die N/A
30-578
30-594
RG-59, RG-6, and 8281 50 and
75 OHM cables (Hex, 0.324
(8.23 mm), 0.255 (6.48 mm),
0.068 (1.73 mm), 0.042 (1.07 mm)
Fully Insulated quick
disconnect terminals with thinner
wire barrels 22-10 AWG
(.324 mm2 - 5.261 mm2)
Tool w/die 30-483
30-579
30-599
22-10 AWG
(.324 mm2 - 5.261 mm2) insulated
terminals/color coded nests
30-18 AWG (.205 mm2 2.08 mm2) Open Barrel Pins
and Sockets
Tool w/die 30-500
Tool w/die N/A
30-580
22-8 AWG (.3 mm2 - 8 mm2)
non-insulated terminals
30-581
RG-58, RG-59/62, BNC/TNC
Coax Connectors (Hex, 0.255
(6.48 mm), 0.213 (5.41 mm),
0.068 (1.73 mm)
Tool w/die 30-502
F-14
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
OmniSeal™ Pro
Compression Tools
CMP Compression Connectors
N EW
■ Approved for use by most cable TV and
satellite companies
■ Permanent connections do not pull
off or come loose
■ One-piece design for quick
installation
■ Compression port seal provides
a water-tight seal for outdoor
applications
30-793
■ Factory pre-set to work with all IDEAL compression connectors
and most major manufacturer’s RG-59, RG-6, RG-6 Quad and
RG-11 F-connectors
■ Adjustable to fit multiple cables and other manufacturer’s
connectors
■ High-strength aluminum body for durability and long life
Description
Cat. No.
OmniSeal™ Pro Compression Tool - F-type (RG-6, 59, 11),
Mini F-type, RCA Mini Connectors
30-603
OmniSeal™ Pro XL Compression Tool - F-type (RG-6, 59, 11),
Mini F-type, RCA Mini RCA and BNC Connectors
30-793
Qty.
Cat. No.
RG-59 Compression F-Connector
50
89-054
RG-59 Compression F-Connector
100
89-104
RG-6 Compression F-Connector
50
89-055
RG-6 Compression F-Connector
100
89-105
RG-6 Quad Compression F-Connector
50
89-056
RG-6 Quad Compression F-Connector
100
89-106
Universal Compression Connectors
■ Four universal connectors
terminate all plenum RG-6,
RG-6, RG-59 and RG-11
braid types from 60%
through quad shielding
OmniSeal™ Compression Tools
■ Lightweight and durable
composite material
■ Approved by most satellite
and cable TV companies
■ High leverage design
■ Approved for indoor/outdoor use
reduces hand fatigue
Feature
Description
OmniSeal™ XL OmniSeal™ 11
30-703
30-720
For RG-6 & RG-59 Cables
X
X
Compresses RCA & F-Connectors
X
X
Compresses BNC Connectors
X
—
Works with IDEAL and PPC brand RCA
connectors
X
X
For RG-11 cables
—
X
Description
Qty.
Universal RG-59 Compression Connectors
Universal RG-6 Compression Connectors
Plenum RG-6 Compression Connectors
Universal RG-11 Compression Connectors
89-059
Jar of 100
89-159
Jar of 50
89-060
Jar of 100
89-160
Jar of 50
89-060P
Jar of 100
89-160P
Clam of 10
89-011
Economy Compression Tool
BNC Compression Connectors
■ Easily compresses
■ Color coded by cable series for
easy identification
series 6 and 59
coax compression
F-connectors
■ Permanent connection –
never comes loose
Cat. No.
Jar of 50
■ Approved for indoor/outdoor use
N EW
■ Works with most brands of compression connectors
■ Adjustable nesting fixture accommodates a variety of connectors
Description
Cat. No.
Economy Compression Tool
30-633
Economy Compression Tool Kit - Includes four 89-035 Connectors
33-653
1-800-435-0705 for Customer Service
Description
Qty.
Cat. No.
BNC RG-6 Compression Connector
Clam of 15
89-057
BNC RG-6 Compression Connector
Jar of 50
89-5057
BNC RG-59 Compression Connector
Clam of 15
89-058
BNC RG-59 Compression Connector
Jar of 50
89-5058
www.idealindustries.com
F-15
Compression Tools/Connectors
■ RF signal containment ensures strong signal
30-603
Compression F-Connector
Port Seals
Mini Compression Connectors
■ For use with most 21-25 AWG
mini coax cable
■ For use with IDEAL RG-6, RG-6 Quad
and RG-59 F-Style compression connectors
to make connections water tight
Description
Port Seal
■ Body is nickel plated for
outstanding corrosion
resistance
Qty.
Cat. No.
5
89-026
F-Connector
Connectors/Splitters
RCA Connector
■ Bandwidth is 5 MHz - 3 GHz,
Impedence is 75 Ohms (nominal),
return loss min. -30 dB @ 3 GHz
Push-on Connectors
■ Permanent connection
Description
Mini Compression F-Connector
■ No termination tool needed
Description
■ Mini RCA head is gold
plated for superior
contact performance
Qty.
Cat. No.
RG-6 Push-on F-Connectors
4
85-065
RG-6Q Push-on F-Connectors
4
85-066
RG-59 Push-on F-Connectors
4
85-067
RG-6 Push-on F-Connectors
50
89-165
Coax Connector Kit w/Economy Coax Stripper &
four RG-6 Push-On F-Connectors
—
33-320
Mini Compression RCA Connector
Qty.
10
Cat. No.
89-014SM
10
89-014SMRCA
Splitters
85-033
85-032
85-034
F-Series Coaxial Connectors
Description
Quantity
Cat. No.
F-Series Connectors utilize threaded couplings and cable conductors
as contacts for CATV and other UHF applications.
CATV Cable Splitter, 5-900 MHz, 2-Way
High Performance Cable Splitter,
5MHz-1GHz 3-Way
Card of 1
Box of 10
Card of 1
Box of 10
Card of 1
Card of 1
Box of 10
Card of 1
Box of 10
85-032
86-432
85-033
86-433
85-034
85-132
86-132
85-133
86-133
High Performance Cable Splitter,
5MHz-1GHz 4-Way
Card of 1
Box of 10
85-134
86-134
Description
Quantity
Cat. No.
F-Series, Twist-on
Plug, RG-59
Card of 4
Card of 10
Card of 4
Card of 10
Card of 50
Box of 100
Card of 4
Card of 10
Card of 50
Box of 100
Card of 4
Card of 10
Card of 50
Box of 100
84-018
85-035
84-016
85-036
85-016
86-016
84-017
85-037
85-017
86-017
84-030
85-057
85-030
86-030
F-Series, Female
Adapter
Card of 10
85-031
F-Series,
Terminator
Card of 10
85-038
F-Type, Twist-on
RG-6
Card of 4
Card of 10
Card of 50
Box of 100
84-039
85-053
85-039
86-039
F-Series, Crimp
Plug, RG-59
F-Series, Crimp
Plug, RG-6
F-Series, Crimp Plug,
RG-6, Quad Shield
CATV Cable Splitter, 5-900 MHz, 3-Way
CATV Cable Splitter, 5-900 MHz, 4-Way
High Performance Cable Splitter,
5MHz-1GHz 2-Way
Satellite and Digital TV Splitters
85-332
85-333
85-334
■ Designed for easy mounting over cable
■ All ports are F female connectors, 75Ω
■ Two grounding screws eliminate the need for grounding block
■ Includes two mounting screws (Phillips/slotted head)
F-16
www.idealindustries.com
Description
2-Way, 5MHz - 2.3GHz
Qty.
1
Cat. No.
85-332
3-Way, 5MHz - 2.3GHz
1
85-333
4-Way, 5HMz - 2.3GHz
1
85-334
1-800-435-0705 for Customer Service
DataComm Equipment
Digital Cable Splitter
Coax Connector Tool - F & BNC
N EW
■ Nickel-plated housing
■ Works on compression and
hex connectors
■ High-performance impedance-
■ Makes attaching (and detaching)
connector to equipment easier
balanced Printed Circuit Board
design
■ Bandwidth: 5MHz - 1 GHz
Impedance: 75 Ohm
■ Aids in installing CATV
connectors on coax cable
■ Over 120 dB of RFI shielding
■ New comfort grip handle
N EW
■ Splits signals up to 8 outlets
Description
Cat. No.
■ Terminators (85-038) needed for all unused ports for optimal
Coax Connector Tool - F & BNC
35-046
performance
Description
Cat. No.
Digital Cable Splitter, 8-Way
85-138
Diplexer, 2.3 GHz
■ Combine or split cable/
N EW
antenna signals with
satellite signals
4-Way Indent Crimp Tools
Crimp solid barrel contacts for
RS232 interface connectors.
Feature four-way indent dies
(per MS22520 specifications),
full cycle ratchet, built-in pin and
socket locator and comfort-grip handles.
35-465
■ High-grade steel construction for outstanding performance
■ High quality PCB design
Description
Cat. No.
20-26 AWG (.519 mm2 - .128 mm2) RS232 D-sub
Round Barrel Contacts, Pins or Sockets
35-465
■ High-quality machined threads for quick connections
16-22 AWG (1.31 mm2 - .324 mm2) Round Barrel
Contacts, Pins,Sockets and Deutsch 16 Pin Contacts
35-466
■ Grounding hole for up to 6 AWG wire
Trompeter BNC Connector Center Pins
35-468
■ Corrosion-resistant sealed
construction
■ Nickel-plated die-cast zinc housing
Description
Cat. No.
Diplexer, 2.3 GHz, SATV/TV Combiner Splitter
85-323
Economy Data
and CATV Kit
Grounding Block
■ Solid zinc alloy, nickel plated
and chromate finished
■ High performance 360°
beryllium copper contact
■ Excellent electrical performance
0 - 3,000 MHz
■ Dual grounding holes can accept up to #6 wire
N EW
■ UL/CSA approved
Kit 33-915 Includes:
Description
Cat. No.
2-Port Grounding Block for F-Connectors
Mini Coax Stripper
85-311
N EW
■ Adjustable stripper for mini
coax cable
Description
Cat. No.
Mini Coax Stripper
45-529
1-800-435-0705 for Customer Service
Description
Qty.
Cat. No.
Data T®-Cutter
1
45-074
Economy Coax Stripper
1
45-320
Economy UTP Stripper
1
45-167
Non-Impact Turn-Lock™ Tool w/110 Blade
1
35-492
Telemaster™ Telephone Tool
1
30-496
Economy Compression Tool
1
30-633
Mechanics Bag
1
35-535
www.idealindustries.com
F-17
Tools/Kits
■ Low insertion loss
Basic Data and
Video Kit
Economy CATV
Compression Kit
33-916
Kit 33-916 Includes:
Kits
Description
Kit 33-621 Includes:
Qty.
Cat. No.
Description
Qty.
Cat. No.
30-633
Data T -Cutter
1
45-074
Economy Compression Tool
1
UTP Stripper
1
45-165
Data T®-Cutter
1
45-074
Stripmaster® Wire Stripper for RG-6
1
45-262
Economy Coax Stripper
1
45-320
Punchmaster™ II Punch Down Tool w/110 Blade
1
35-485
Zipper Pouch
1
35-402
OmniSeal™ Pro XL Compression Tool
1
30-793
RG6 CMP Compression Connectors
4
89-015
TRACETone™ Tone Generator & Amplifier Probe
1
62-140
VDV Multimedia Cable Tester
1
33-856
Journeyman Electrician’s Tote™
1
35-462
Qty.
1
1
1
1
1
50/jar
Cat. No.
30-603
35-535
45-074
45-262
LA-3953
89-060
Qty.
1
1
1
10
10
20
Cat. No.
30-633
45-074
45-526
89-054
89-056
89-055
®
Residential
Compression Kit
Data/Video Kit
Kit 33-625 Includes:
Description
OmniSeal™ Pro Compression Tool
Mechanic’s Tool Bag
Data T®-Cutter
Coax Stripmaster® Wire Stripper for RG-6
Stripmaster® RG-6 QuadShield Repl. Blade
Universal RG-6 Compression Connectors
Kit 33-917 Includes:
Description
Qty.
Cat. No.
Data T®-Cutter
1
45-074
Twist-a-Nut™ 7-in-1 Screwdriver
1
35-908
UTP Stripper
1
45-165
Coax Stripper w/Replaceable Cartridge
1
45-526
Punchmaster™ II Punch Down Tool w/110 Blade
1
35-485
110/66 Blade Combo Punch Down Blade
1
35-407
Crimpmaster™ Crimp Tool for RJ-45 Modular Plugs
1
30-522
OmniSeal™ Pro XL Compression Tool
1
30-793
Probe Pic and Spudger
1
35-473
Coax Connector Tool - F & BNC
1
35-046
VDV MultiMedia Cable Tester
1
33-856
Amplifier Probe
1
62-164
Electrician’s Scissors w/Stripping Notch
1
35-088
Large Mouth Bag — 13 in.
1
35-410
F-18
www.idealindustries.com
Economy
Compression Kit
Kit 33-620 Includes:
Description
Economy Tool
Data T®-Cutter
Coax Stripper
RG-59 Compression F-Connectors
RG-6 Quad Compression F-Connectors
RG-6 Compression F-Connectors
1-800-435-0705 for Customer Service
DataComm Equipment
Crimpmaster™ Twisted Pair Kit
Service
Compression Kit
Kit 33-651 Includes:
Description
Universal RG-6 Compression Connectors
Plenum RG-6 Compression Connectors
BNC RG-59 Compression Connectors
BNC RG-6 Compression Connectors
OmniSeal™ Pro XL Compression Tool
Compression F-Connector Port Seals
Data T®-Cutter
Coax Stripmaster® Wire Stripper for RG-6
Replacement Blade for 45-262
Qty.
50
10
10
10
1
5
1
1
1
Cat. No.
89-060
89-060P
89-058
89-057
30-793
89-026
45-074
45-262
LA-3953
RJ-45/11 Two, Four, Six and Eight-Position
Combination TelCom Termination Kit
Description
Qty.
Cat. No.
Data T®-Cutter
1
45-074
UTP/Coax Stripper
1
45-165
Crimpmaster™ Frame Only
1
30-506
2,4,6-Position Die Set for RJ-11 Plugs
1
30-556
6-Position DEC MMJ Die Set for RJ-11 Plugs
1
30-558
8-Position Die Set for RJ-45 Plugs
1
30-559
8-Position Die Set for RJ-45, AMP Plugs
1
30-560
4-Position Solid Modular Plugs
50
85-394
6-Position Solid Modular Plugs
50
85-395
DEC Connect 6-Position Solid Modular Plugs
50
85-393
8-Position RJ-45 Non-Keyed
Solid Modular Plugs
50
85-396
Qty.
1
1
1
1
200
Cat. No.
45-074
45-165
30-506
30-559
86-396
Qty.
4
1
Cat. No.
85-065
45-320
Crimpmaster™ 10Base-T
RJ-45 Crimping Kit
Kit 33-704 Includes:
Description
Qty.
Cat. No.
Telemaster™ for RJ-11/RJ-45 Plugs
1
30-496
4-Position, RJ-11 Stranded Modular Plugs
15
85-351
6-Position, RJ-11 Stranded Modular Plugs
15
85-352
8-Position, RJ-45 Stranded Modular Plugs
15
85-353
Economy 10Base-T Kit
1-800-435-0705 for Customer Service
Description
Data T®-Cutter
UTP/Coax Stripper
Crimpmaster™ Crimp Tool Frame only
8-Position Die Set for RJ-45 Plugs
8-Position RJ-45 Non-Keyed Solid Plugs
RG-6 Push-on
Connector Kit
Kit 33-750 Includes:
Description
UTP/Coax Stripper
Telemaster™ RJ-11/RJ-45 Crimp Tool
8-Position RJ-45 Non-keyed Solid Plugs
Kit 33-652 Includes:
Qty.
1
1
50
Cat. No.
45-165
30-496
85-346
Kit 33-320 Includes:
Description
RG-6 Push-On Connectors
2-Step 59 & 6 Series Stripper
www.idealindustries.com
F-19
Kits
Kit 33-630 Includes:
Cable Service/Termination Kit
Compression Connector
Installation Kit
N EW
Kit 33-623 Includes:
Description
Data T®-Cutter
Coax Cable Stripper
Economy Compression Tool
Pouch w/belt clip
Qty.
1
1
1
1
Cat. No.
45-074
45-320
30-633
—
Kits
Qty.
Cat. No.
1
45-074
Center Conductor Cutter
1
35-060
UTP/Coax Stripper
1
45-165
Coax Stripper w/black cassette
1
45-520
Crimpmaster™ RG-58/59 Crimp Tool
1
30-502
2, 4, 6-Position Die Set for RJ-11 Plugs
1
30-556
8-Position Die Set for RJ-45 Plugs
1
30-559
Punchmaster™ II Punch Down Tool w/66 Blade
1
35-487
Punchmaster™ II 110 Blade only
1
35-495
ABS™ Signal Thrower™
1
62-184
Cat. No.
ABS™ Tester
1
62-180
35-485
LinkMaster™ Tester w/Remote
1
62-200
Cable Assemblies
1
K-7921
Qty.
Cat. No.
Cable Service Kit
Kit 33-605 Includes:
Description
Punchmaster™ Punch Down Tool w/110 Blade
Qty.
1
Kit 33-861 Includes:
66 Blade Only
1
35-497
Electrician’s Scissors w/Stripping Notches
1
35-088
UTP/STP Stripper
1
45-165
5-in-1 Screwdriver
1
35-905
Probe Pic & Spudger
1
35-473
Tone Generator
1
62-160
Amplifier Probe
1
62-164
Journeyman’s Electrician’s Tote™
1
35-462
Description
Data T®-Cutter
Twisted Pair/Coax
Termination Kit
Deluxe Cable
Service Kit
Kit 33-869 Includes:
Description
Kit 33-705 Includes:
Description
Qty.
Cat. No.
Punchmaster™ II Punch Down Tool w/110 Blade
1
35-485
66 Blade Only
1
35-497
Electrician’s Scissors w/Stripping Notches
1
35-088
UTP/STP Stripper
1
45-165
5-in-1 Screwdriver
1
35-905
Probe Pic & Spudger
1
35-473
Tone Generator
1
62-160
Amplifier Probe
1
62-164
Journeyman’s Electrician’s Tote™
1
35-462
Telemaster™ Telphone Tool
1
30-496
LinkMaster™ Tester and Remote
1
62-200
F-20
www.idealindustries.com
Data T®-Cutter
1
45-074
Scissors w/Stripping Notch
1
35-088
Center Conductor Cutter
1
35-060
UTP/Coax Stripper
1
45-165
Coax Stripper w/Black Cassette
1
45-520
Crimpmaster™ Frame Only
1
30-506
2,4,6-Position Die Set for RJ-11 Plugs
1
30-556
8-Position Die Set for RJ-45 Plugs
1
30-559
RG-58/59/62 BNC Die Set
1
30-581
Punchmaster™ II w/110 Blade
1
35-485
Punchmaster™ II 66 Blade Only
1
35-497
ABS™ Signal Thrower™
1
62-184
ABS™ Tester
1
62-180
ZipKit™ Carrying Case
1
35-419
1-800-435-0705 for Customer Service
DataComm Equipment
Technician’s
Service Kit
Crimpmaster™ F-Type
(CATV) Connectors Kit
Now
includes
7-in-1
Screwdriver
Description
Punchmaster™ II Punch Down Tool w/110 Blade
Punchmaster™ II 66 Blade only
Electrician’s Scissors w/stripping notches
UTP/STP Stripper
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
Probe Pick and Spudger
Nylon case
Qty.
1
1
1
1
1
1
1
Cat. No.
35-485
35-497
35-088
45-165
35-908
35-473
62-205
Kit 33-400 Includes:
Description
Qty.
Cat. No.
Crimpmaster™ CATV Crimp Tool
1
30-503
F-Connector, Crimp-on RG-59 Plugs
20
85-016
F-Connector, Crimp-on RG-6 Plugs
20
85-017
Qty.
Cat. No.
1
35-427
Pro Installer Kit
Installer Kit
Kit 33-945 Includes:
Description
Kit 33-935 Includes:
Description
Qty.
Cat. No.
Large Mouth Bag – 18 in.
UTP/STP Stripper
1
45-165
110/66 Blade
1
35-407
Data T®-Cutter
1
45-074
66 Blade only
1
35-497
Jab Saw
1
35-275
Punchmaster™ II 110 Blade only
1
35-485
Large Mouth Bag – 18 in.
1
35-427
Lever™-Snips Electrician’s Scissors
1
35-087
Punchmaster™ II 110 Blade only
1
35-485
Probe Pic and Spudger
1
35-473
110/66 Blade
1
35-407
UTP/STP Stripper
1
45-165
Electrician’s Scissors w/stripping notches
1
35-088
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
1
35-908
Torpedo Level
1
35-205
Mag-Tape™ Tape Measure
1
35-238
Mag-Tape™ Tape Measure
1
35-238
Torpedo Level
1
35-205
Tongue & Groove Pliers – 10 in.
1
35-430
Jab Saw
1
35-275
5-in-1 Screwdriver/Nutdriver
1
35-905
OmniSeal™ Compression Tool
1
30-603
Probe Pic and Spudger
1
35-473
Coax Stripper - 2-Step
1
45-526
Cable Cutter
1
35-061
Smart-Grip™ Long-Nose Pliers – 7-3/4 in.
1
35-3037
Fiberglass-Handled Hammer – 18 oz. x 12-1/2 in.
1
35-210
Smart-Grip™ Tongue & Groove Pliers – 10 in.
1
35-3430
Tongue & Groove Pliers – 9-1/2 in.
1
35-420
Tone Generator
1
62-160
Amplifier Probe
1
62-164
Data T -Cutter
1
45-074
Cable Splicing Knife
1
35-091
Ratchet Telemaster™
1
30-696
F-Connector Tool
1
35-046
®
1-800-435-0705 for Customer Service
www.idealindustries.com
F-21
Kits
Kit 33-505 Includes:
BNC Coaxial Connectors
IDEAL coaxial connectors are available in two grades. A premium specification grade features precision machined brass bodies with nickel
plating. The commercial grade consists of machined diecast components with nickel plating. A variety of connectors handle different
termination types, cable size, impedance rating and attachment means.
■ Connector construction covers both plenum and non-plenum cable jackets
■ Captive gold center contacts provide maximum conductivity and minimal resistance
■ Nickel plating resists corrosion, tarnish and ensures signal quality
■ Meets military specifications. MS39012 and MIL202 where applicable.
■ Available in both small and bulk quantities to suit a range of application requirements
Connectors
Connector
Type
Cable
Type
Center
Conductor
Jacket
Connector
Impedance
Connector
Grade
Insulation
Model
Quantity
Cat. No.
50 Ohm
Commercial
Delrin
IA-3620
Bag of 5
85-490
BNC Plug
RG-58
20 AWG Solid
NonPlenum
BNC Plug
RG-58
20 AWG Solid
NonPlenum
50 Ohm
Specification
Delrin
IA-3621
Bag of 5
85-491
BNC Plug
RG-59
20 AWG Solid
NonPlenum
75 Ohm
Commercial
Delrin
IA-3617
Bag of 5
Box of 100
85-502
86-502
BNC Plug
RG-59
20 AWG Solid
Plenum
75 Ohm
Commercial
Delrin
IA-3618
Bag of 5
85-512
BNC Plug
RG-59
22-23 AWG Solid
NonPlenum
75 Ohm
Commercial
Delrin
IA-3624
Bag of 5
85-513
BNC Plug
RG-59
22-23 AWG Solid
Plenum
75 Ohm
Commercial
Delrin
IA-3626
Bag of 5
85-515
BNC Plug
RG-59
22-23 AWG Solid
NonPlenum
50 Ohm
Specification
Delrin
IA-3592
Bag of 5
85-517
BNC Plug
RG-6
18 AWG Solid
NonPlenum
75 Ohm
Specification
Delrin
IA-3634
Bag of 5
85-545
BNC Plug
Belden
8281
20 AWG Solid
NonPlenum
75 Ohm
Specification
Delrin
IA-3636
Bag of 5
85-550
BNC Jack
RG-59
22-23 AWG Solid
NonPlenum
75 Ohm
Specification
Teflon
IA-3638
Bag of 5
85-553
BNC
Terminator
—
—
—
50 Ohm
Specification
Delrin
IA-3641
Bag of 5
85-556
90° BNC Plug
RG-6
18 AWG Solid
NonPlenum
75 Ohm
Specification
Delrin
IA-3659
Bag of 5
85-575
BNC Tee
Adapter
—
—
50 Ohm
Commercial
Delrin
IA-3667
Bag of 5
85-588
50 Ohm
Specification
Delrin
IA-3668
Bag of 5
85-590
50 Ohm
Commercial
Delrin
IA-3677
Bag of 5
85-480
BNC Adapter
BNC
Twist-on Plug
Jack to Plug to
Jack to Jack
RG-59
22-23 AWG Solid
NonPlenum
BNC/TNC Connector Removal Tools
35-041
12 in. (30.5 cm) Overall Length,
8 in. (20.3 cm) Blade Length
35-042
16 in. (40.6 cm) Overall Length,
12 in. (30.4 cm) Blade Length
35-043
F-22
www.idealindustries.com
35-042
I F E TI M
E
Cat. No.
8 in. (20.3 cm) Overall Length,
4-1/2 in. (11.4 cm) Blade Length
• IDEAL •
UA
G
Description
35-043
EE
locations of connectors.
L
■ BNC/TNC connector removal tools for easy access to high density
R ANT
#35-041 not shown.
1-800-435-0705 for Customer Service
DataComm Equipment
85-205
85-218
85-220
85-239
85-232
85-237
Telephone Wall Plates are listed and approved by the Underwriter’s
Laboratories and contain 50 micro inches of gold plating on the
contacts.
Telephone Wall Plates - Standard Size
Description
Color
Ivory
RJ-11, 2 Pair
White
Almond
Dual RJ-11, 2 Pair
Ivory
White
RJ-11, 3 Pair
Almond
RJ-11, 3 Pair
Ivory
White
Ivory
RJ-45, 4 Pair
White
Almond
Dual RJ-45, 4 Pair
Ivory
White
RJ-11, 2 Pair
Wall Mount Plate
Ivory
White
Almond
Ivory
CATV Coax
Dual CATVCoax
White
Almond
Ivory
White
Ivory
Combo CATV/RJ-11
White
Almond
1-800-435-0705 for Customer Service
Telephone Wall Plates — Mid-Size
Qty.
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Cat. No.
85-206
86-206
85-207
86-207
85-223
86-223
85-208
86-208
85-209
86-209
85-225
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Box of 100
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
86-225
85-212
86-212
85-213
86-213
85-214
86-214
85-215
86-215
85-227
86-227
85-216
86-216
85-217
86-217
85-218
86-218
85-219
86-219
85-229
86-229
85-200
86-200
85-201
86-201
85-220
86-220
86-202
86-203
85-204
86-204
85-205
86-205
85-222
86-222
Description
Color
Ivory
RJ-11, 2 Pair
White
Almond
Ivory
Combo CATV/RJ11
White
Almond
Ivory
CATV Coax
White
Almond
Dual CATV Coax
White
Qty.
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Box of 100
Cat. No.
85-242
86-242
85-237
86-237
85-233
86-233
85-241
86-241
85-236
86-236
85-232
86-232
85-239
86-239
85-234
86-234
85-230
86-230
86-235
Surface Jacks
For initial installations where cable cannot be pulled through wall
or for replacement of modular four-prong jacks.
Description
Color
RJ-11, 2 Pair
RJ-11, 2 Pair
RJ-11, 2 Pair
White
Ivory
Almond
Qty.
Cat. No.
Card of 1
Card of 1
Card of 1
85-244
85-245
85-246
www.idealindustries.com
F-23
Wall Plates/Jacks
Wall Plates
CAT 6 Modular Plugs
Cables
■ Supports CAT 6
■ Unique three-piece design provides
easy installation and optimal performance
■ Crimps with a standard RJ-45 crimp die
■ 50 micron gold contacts, 8-position, 8-contact
Connectors/Cables/Plugs
85-770
■ Suitable for solid or stranded conductors
Description
CAT 6 Modular Plugs
Qty.
Cat. No.
25
85-366
85-780
■ Customizable bulk cable
■ Bulk CAT 5e solid 4-pair, CMR rated, 24 AWG, 350 MHz cable
TelCom Modular Plugs
■ Bulk 2-conductor in-wall, 16 AWG speaker wire
Description
Cat. No.
CAT 5e Cable - 100 ft.
85-780
In-wall Speaker Wire - 50 ft.
85-770
85-394
85-396
85-403
■ All plugs comply with FCC 68 guidelines and are UL Listed
Insulation Displacement
Connectors (IDC)
■ Plugs are capable of supporting the latest EIA/TIA cable system
performance categories when installed in compliance with
appropriate EIA/TIA standards and methods
■ Plugs offered for round cable with solid conductors and
for flat cable and stranded conductors
■ Position and contact configurations cover popular styles
85-900
85-925
Description
45-719
Qty.
6-Position 4-Contact Flat Stranded
85-950
IDC connectors create fast splice and tap connections on solid
copper wires. Designed for low voltage telecommunication cables.
6-Position 6-Contact Flat Stranded
■ Moisture-resistant sealant protects wires from corrosion
■ Use with solid copper single-conductor wire
4-Position 4-Contact Flat Stranded (Handset)
■ Kinetic Super™ Wire Stripper/Crimper easily cuts and strips
22 to 24 AWG solid wire
Description
8-Position 8-Contact Flat Stranded
Cat. No.
25
85-351
50
85-401
100
86-401
25
85-352
50
85-402
100
86-402
100
86-398
25
85-353
50
85-403
86-403
Qty.
Cat. No.
100
UB-I, 2-Wire Tap Splice IDC
25
85-900
25
85-344
UR-I, 3-Wire Butt Splice IDC
25
85-925
50
85-394
UY-I, 2-Wire Butt Splice IDC
25
85-950
UR-I, 2-Wire Butt Splice IDC
100
86-925
6-Position 6-Contact Round Solid
UY-I, 2-Wire Butt Splice IDC
100
86-950
8-Position 8-Contact CAT 6 Modular Plug
UB-I, 2-Wire Tap Splice IDC
1,000
87-900
UR-I, 3-Wire Butt Splice IDC
1,000
87-925
UY-I, 2-Wire Butt Splice IDC
1,000
87-950
IDC Combo Pack
25
85-960
Kinetic Super™ Wire Stripper/Crimper
1
45-719
F-24
www.idealindustries.com
6-Position 4-Contact Round Solid
8-Position 8-Contact Round Solid
100
86-394
100
86-395
25
85-366
25
85-346
50
85-396
100
86-396
1-800-435-0705 for Customer Service
DataComm Equipment
Coaxial Selection Chart
Cable
Cutter
Stripper
Crimper
Connector
RG-59
45-074, 45-075
45-265, 45-603, 45-320
30-603, 30-793, 30-703, 30-720, 30-633
89-054, 89-104, 89-059, 89-159
RG-6
45-074, 45-075
45-262, 45-603, 45-320
30-603, 30-793, 30-703, 30-720, 30-633
89-055, 89-105,89-060, 89-160
RG-6 Quad Shield
45-074, 45-075
45-282, 45-603, 45-320
30-603, 30-793, 30-703, 30-720, 30-633
89-056, 89-106, 89-060, 89-160
RG-6 & Quad 6
Plenum
45-074, 45-075
45-510
30-603, 30-793, 30-703, 30-720, 30-633
89-060P, 89-160P
RG-11
45-074, 45-075
45-164, 45-510
30-603, 30-793, 30-720
89-011
Minis
45-074, 45-075
45-529
30-603, 30-793, 30-703
89-014SM, 89-014SMRCA
RG-59
45-074, 45-075
45-265, 45-603, 45-320
30-603, 30-793, 30-703
89-058, 89-5058
RG-6
45-074, 45-075
45-265, 45-603, 45-320
30-603, 30-793, 30-703
89-057, 89-5057
Cutter
Stripper
Crimper
Connector
RG-59
45-074, 45-075
45-265, 45-603, 45-320
30-503
85-036, 85-016, 86-016
RG-6
45-074, 45-075
45-265, 45-603, 45-320
30-503
85-037, 85-017, 86-017
RG-6 Quad Shield
45-074, 45-075
45-282, 45-603, 45-320
30-503
85-057, 85-030, 86-030
Tester
CATV/SATV/F-type
33-856, 33-880
33-881, 33-887*
BNC
Crimp Style
Cable
Tester
CATV/SATV/F-Type
RG-6 Plenum
45-074, 45-075
45-282, 45-603
30-503
N/A
RG-11
45-074, 45-075
45-164, 45-510
N/A
N/A
RG-59, Non-Plenum
45-074, 45-075
45-520
30-502, 30-483
85-513, 85-517, 85-502
RG-6 Non-Plenum
45-074, 45-075
45-520
30-483
85-545
33-856, 33-880
33-881, 33-887*
BNC
*Need LA-4173 adapter.
1-800-435-0705 for Customer Service
www.idealindustries.com
F-25
Coaxial Selection Chart
Compression Style
MiniLite-Strip™
Optical Fiber Stripper
Simplex/Duplex 3mm
Jacket Stripper
■ Small strip notch
engineered and
precision-ground to
strip 900 micron or
250 micron buffer coatings
from 125 micron fiber
■ Designed to remove the jacket from 3mm Simplex or Duplex (zip
Fiber Optic Tools
cord) fiber optic cable
■ Form-ground, knife-type blades for accurate easy stripping without
damaging the fiber or Kevlar® strength member
■ Contoured, comfort-grip handles to reduce operator fatigue
Description
Cat. No.
Simplex/Duplex 3mm Jacket Stripper
45-349
■ Larger round strip notch machined to remove the 3mm outer jacket
■ Strip notches pre-set and locked, no field adjustment necessary
Description
Cat. No.
MiniLite-Strip™ Optical Fiber Stripper
45-352
Lite-Strip™
Optical Fiber Stripper
Note: Kevlar® is a registered trademark of DuPont.
Stripmaster® Ribbon Fiber
Jacket Stripper
■ Removes jacket from Ribbon Fiber without
damage to the Kevlar® strength member of
the Ribbon Fiber
V-notch blades strip a wide range of outer cable jacket. Precisionground, replaceable knife-type blades strip tight buffer tube
insulations (900µm). Also strips mechanically strippable coatings
from 250 microns to 900 microns.
Note: Frame and blade-set sold separately.
■ Replaceable precision-ground blades cleanly strip buffer
coatings
Description
Cat. No.
■ New funneled hole makes cable insertion easier
Stripmaster® Wire Stripper Frame only
L-5620
■ Improved spring mounting returns handles to original position
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable
LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable
LB-1153
after every application
■ One-step, 900 micron stripping hole provides broader
stripping range
Note: Kevlar® is a registered trademark of DuPont.
■ Extra durable to withstand normal drops without requiring
tool realignment
®
Serrated Cutter (For Kevlar )
with Breaker Notch
■ New gauge color makes fiber and hole identification easier
■ Improved comfort-grip handles for an easier, more comfortable
stripping process
Description
Lite-Strip™ Optical Fiber Stripper (900µm/250µm)
Fiber Sizes
Cat. No.
125µm, 140µm
45-350
■ Two-Step process significantly
increases the life of this rugged tool
■ Superior quality high-carbon stainless steel with molybdenum and
vanadium provides the super-hard edges needed to stand up to
the demands of today’s market
■ Textured cushioned-grip handles
■ Value-priced for contractors, cable assembly houses, fiber
installers/technicians and tool kits
Description
Cat. No.
Serrated Cutter w/Breaker Notch (Patent pending)
45-344
Note: Kevlar® is a registered trademark of DuPont.
F-26
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
Cable Strippers
Plastic Polishing
Fixture
45-162
■ Universal fitting accepts all ST®, SC
and FC connectors with 2.5mm
ferrules
■ Economically priced
■ Grooved face for polishing efficiency
This lightweight, compact stripper is inexpensive and
simple to operate.
■ Adjustable blades can be set for any depth to help ensure
nick-free strips
■ Use with twisted-pair wire, tightly wrapped stranded cables,
CATV cable, CB antenna cable, SO, SJ, SJT and other types of
flexible power cords
■ Includes three straight and one round blade
Description
Cat. No.
Cable Stripper, up to 1/8 in. (3.2 mm) O.D., Gray
45-162
Cable Stripper, 1/8 in. (3.2 mm) to 7/32 in. (5.556 mm) O.D., Blue
45-163
Replacement Blade Set for 45-162, 45-163, 45-165
L-9225
Description
Cat. No.
Plastic Polishing Fixture
45-342
Note: ST® is a registered trademark of AT&T.
Stainless Steel Polishing Fixture for
Optical Fiber ST® and
SC Type Connectors
Produces polished fiber optic ST® and
SC type connectors for optimum
connector performance.
■ Precision-machined, stainless-steel
disk provides accurate polishing angle
for desired end face finish
Split-Tip Fiber Optic Swabs
■ Stainless-steel hardness maintains long life and resists
■ Split-tip design cleans fiber easier
uneven wear
and more efficiently than other
methods
■ Stepped surface reduces drag and friction for easier polishing
■ Tube/handle is pre-loaded
Description
with 99% isopropyl alcohol
Polishing Fixture for Optical Fiber
SC/ST® Type Connectors
■ A single swab can be used
for many cleanings or until the
alcohol is gone
Qty.
Cat. No.
20/bag
45-360
to choose from to meet your specific
needs – Ruby, Sapphire, Carbide
Polishing Films for Fiber
Optic Connectors
■ For optimum connector
■ Three professional quality blade styles
45-358
■ Color-coded handles for quick,
45-337
45-339
polishing results, we
recommend a three-step
procedure using 0.5µm,
3µm and 12µm 3 in. x 6 in.
aluminum oxide polishing
films
■ Lot-to-lot consistency in our
easy identification
Red – Ruby
Blue – Sapphire
Black – Carbide
films means repeatable connector
finishes on ceramic, stainless steel,
plastic and composite ferrules
■ A single sheet will typically yield 10 to 20 connectors when using
the recommended 3-step procedure
45-359
■ Soft non-slip grip provides precise
45-357
control during scribing
■ Clear safety cap protects the blades from
damage when not in use
Handle Color
Cat. No.
Ruby Blade Fiber Optic Scribe
Red
45-357
Sapphire Blade Fiber Optic Scribe
Blue
45-358
Carbide Blade Fiber Optic Scribe
Black
45-359
1-800-435-0705 for Customer Service
45-341
45-338
DualScribe™ Double-Ended
Fiber Optic Scribes
Description
1
Note: ST is a registered trademark of AT&T.
Split-Tip Fiber Optic Swabs
reversible blade doubles tool life
Cat. No.
®
Description
■ 30° single bevel – DualScribe™
Qty.
Description
Color
Qty.
Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide
Ivory
20 films/sleeve
45-337
3.0µm, 3” x 6”, Aluminum Oxide
Lt. Yellow
20 films/sleeve
45-338
12µm, 3” x 6”, Aluminum Oxide
Lt. Red
20 films/sleeve
45-339
www.idealindustries.com
F-27
Fiber Optic Tools
■ Precision tool used by manufacturers, contractors and in tool kits
Fiber Inspection Microscope
VFF Visual Fault Finder
Laser light source used to locate breaks, faulty
splices and crimps
■ NEW 2.5mm Universal Adapter for all
ST®, SC and FC connectors
■ Useful over a distance of 5km (3 miles)
■ Two AA batteries provide over 30 hours
of continuous use
Fiber Optic Tools
■ Slim, pocket-sized tool in rugged
metal housing
■ 100X magnification for viewing multimode connectors
■ Includes 2.5mm connector “Universal Adapter” for FC, ST®
and SC style connectors
■ Oblique illumination provides excellent view of ferrule cleanliness
and core condition
■ Rugged, rubberized metal housing, precision glass optics and a
built-in laser safety filter
■ Nylon carrying case with belt
loop included
Description
Visual Fault Finder
Cat. No.
VFF5
Note: ST® is a registered trademark of AT&T.
■ White LED illumination delivers 100,000 hours bulb life
■ Soft padded carrying case included
■ Battery life 48+ hours
■ Compact size 7.5 in. x 1.96 in. x 1.18 in.
■ Optional 200X Conversion Eyepiece threads on for viewing finish/
polish of singlemode connectorsD
Description
Cat. No.
Fiber Inspection Microscope
45-332
1.25mm Connector Adapter
45-334
MTRJ-Style Connector Adapter
45-335
200X Conversion Eyepiece for Singlemode Connectors
45-336
Note: ST is a registered trademark of AT&T.
®
F-28
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
G
Standard and Heavy-Duty Toggle Switches
■
■
■
■
■
■
■
Toggle Switches
■
Great for power tool and motor control switch applications
Rugged long-wearing solid brass/nickel-plated bushings
1/2 in. diameter mounting hole
Dielectric Strength: 1500V
Mechanical Life: 100,000 cycles
Operating Temperature: 32°F to 185°F (0°C to 85°C)
DC Rating: Factory tested 100,000 cycles to 21 Amp 14.8 VDC
Bulk packaging of 100 available upon request
H
L
W
Rating
Product
Description
Poles
Circuitry
Termination
Style
No. of
Terminals
Amps 125
VAC
Amps 277
VAC
HP 125-250 Dimensions
(L0 × W0 × H0 )
VAC
Toggle Switch with
On-Off Faceplate
SPST
On-Off
Screw
2
20
10
3/4
1.13 × .57 × .61
774011
774011BK†
Toggle Switch with
On-Off Faceplate
SPST
On-Off
Spade
2
20
10
3/4
1.13 × .57 × .61
774008
774008BK†
Toggle Switch
SPST
On-Off
“O”Ring & Screw
2
20
10
3/4
1.13 × .57 × .61
774010
Toggle Switch
SPST
(On)-Off
Screw
2
20
10
3/4
1.13 × .57 × .61
774093
Toggle Switch
SPST
On-(Off)
Screw
2
20
10
3/4
1.13 × .57 × .61
Cat. No.
774088
774088BK†
774111
Toggle Switch w/boot
SPST
On-Off
Wire leads
w/boot
2
20
20
1-1/2
1.18 × .68 × .75
774111BK†
Toggle Switch
SPDT
On-On
Screw
3
20
10
3/4
1.13 × .57 × .61
774012
Toggle Switch
SPDT
On-On
Spade
3
20
10
3/4
1.13 × .57 × .61
774100
Toggle Switch
SPDT
On-Off-On
Screw
3
20
10
3/4
1.13 × .57 × .61
774013
Toggle Switch
SPDT
On-Off-On
Spade
3
20
10
3/4
1.13 × .57 × .61
774027
Toggle Switch
SPDT
On-Off-(On)
Screw
3
20
10
3/4
1.13 × .57 × .61
774094
Toggle Switch
SPDT
(On)-Off-(On)
Screw
3
20
10
3/4
1.13 × .57 × .61
774009
Heavy-Duty Toggle Switch DPST
On-Off
Screw
4
20
10
1-1/2
Heavy-Duty Toggle Switch DPST
On-Off
Spade
4
20
10
1-1/2
Heavy-Duty Toggle Switch DPST
Heavy-Duty Toggle Switch DPST
(On)-Off
On-(Off)
Screw
Screw
4
4
20
20
10
10
1-1/2
1-1/2
( ) denotes momentary action
G-2
774014
774014BK†
774005
1.30 × .76 × .80
774005BK†
1.30 × .76 × .80
774103
1.30 × .76 × .80
774105
1.30 x .76 × .80
†Bulk Package of 100
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
Standard and Heavy-Duty Toggle Switches
Product
Description
Poles
Heavy-Duty Toggle Switch DPDT
Circuitry
Termination
Style
No. of
Terminals
Amps 125
VAC
Rating
Amps 277
VAC
On-On
Screw
6
20
10
HP 125-250 Dimensions
(L0 × W0 × H0 )
VAC
1-1/2
1.30 × .76 × .80
Cat. No.
774015
774015BK†
On-On
Spade
6
20
10
1-1/2
1.30 × .76 × .80
774091
774091BK†
Heavy-Duty Toggle Switch DPDT
(On)-On
Screw
6
20
10
1-1/2
1.30 × .76 × .80
774028
774028BK†
Heavy-Duty Toggle Switch DPDT
On-Off-On
Screw
6
20
10
1-1⁄2
1.30 × .76 × .80
Heavy-Duty Toggle Switch DPDT
On-Off-On
Spade
6
20
10
1-1/2
1.30 × .76 × .80
774016
774003
774003BK†
Heavy-Duty Toggle Switch DPDT
(On)-Off-On
Screw
6
20
10
1-1⁄2
1.30 × .76 × .80
774104
Heavy-Duty Toggle Switch DPDT
(On)-Off-(On)
Screw
6
20
10
1-1⁄2
1.30 × .76 × .80
774000
Heavy-Duty Toggle Switch DPDT
(On)-Off-(On)
Spade
6
20
10
1-1/2
1.30 × .76 × .80
774115
774115BK†
Toggle Switch
3PST
On-Off
Screw
6
15
10*
3/4
1.31 × 1.09 × .80
Toggle Switch
3PDT
On-On
Screw
9
15
10*
3/4
1.31 × 1.09 × .80
774106
774089
774089BK†
Toggle Switch
3PDT
On-Off-On
Screw
9
15
10*
3/4
1.31 × 1.09 × .80
774092
Toggle Switch
4PST
On-Off
Screw
8
15
10*
3/4
1.31 × 1.44 × .80
774108
Toggle Switch
4PDT
On-On
Screw
12
15
10*
3/4
1.31 × 1.44 × .80
774109
Toggle Switch
4PDT
On-Off-On
Screw
12
15
10*
3/4
1.31 × 1.44 × .80
774110
www.idealindustries.com
G-3
*250VAC, Dielectric strength: 1000V
( ) denotes momentary action
1-800-435-0705 for Customer Service
†Bulk Package of 100
Toggle Switches
Heavy-Duty Toggle Switch DPDT
Medium and Light-Duty Toggle Switches
■
■
■
■
■
Great for household appliances and equipment
Bat toggle switch, 774007, is ideal for battery-powered equipment including trimmers and lawn mowers
Wire leads are #18 AWG, 60 stripped wire
1/2 in. diameter mounting hole
Bulk packaging available upon request
H
L
Toggle Switches
Product
C
Poles
Circuitry
Termination
Style
No. of
Terminals
Bat Toggle with
On-Off Faceplate
SPST
On-Off
Screw
2
Bat Toggle with
On-Off Faceplate
SPST
On-Off
Wire Leads
2
4 Amps 250VAC/DC, 8 Amps 125VAC/DC,
10 Amps 125 VAC, 1⁄3 HP 125 VAC
.98 × .64 × .62
774018
Bat Toggle*
SPST
On-Term
Ground
Spade
1
21 Amps 14 VDC
.69 × .55 × .34
774007
Short Ball Toggle Switch
SPST
On-Off
Screw
2
6 Amps 120 VAC, 3 Amps 240 VAC
.69 × .55 × .34
774001
Short Ball Toggle Switch
SPST
On-Off
Wire Leads
2
6 Amps 125 VAC, 3 Amps 250 VAC
.89 × .47 × .55
Description
Dimensions
(L0 × W0 × H0)
Rating
Cat. No.
774017
6 Amps 120 VAC, 3 Amps 240 VAC
.69 × .55 × .34
774017BK†
774002
774002BK†
*DC rating not CSA or RU listed
†Bulk Package of 100
US
W
Extra Heavy-Duty AC/DC Toggle Switches
■
The switch that can handle your heavy-duty requirements
■
Quick-make/quick-break type switches are ideal for DC voltage applications
■
Perfect for industrial motor control, with its sturdy metal construction and stiff actuation force, it will
withstand the abuses of virtually any application
■
Bulk packaging of 100 available upon request
H
L
Product
Description
No. of
Poles Circuitry Termination
Terminals
Style
W
Amps
125V
Rating
Amps
250V
HP
125-250V
Dimensions
(L0 × W0 × H0 )
16
8
1
1.75 × .84 × .76
Cat. No.
774095
Heavy-Duty Toggle Switch
SPST
On-Off
Screw
2
774095BK†
Heavy-Duty Toggle Switch
DPST
On-Off
Screw
4
16
8
1
1.75 × .84 × .76
774096
Heavy-Duty Toggle Switch
DPST
On-Off
Screw
4
20
10
1-1/2
2.09 × 1.00 × .90
774097
†Bulk Package of 100
G-4
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
Toggle Switch Accessories
These neoprene covers are great for outdoor and
other environmentally tough conditions. They
screw onto toggle switches to protect switches
from moisture, dust and dirt.
Product
■
Description
Nickel indicator plate fits easily on most toggle
switches to identify the On-Off positions
Mounting
Toggle Switch Cover
Dimensions
15/32- 32 NS-2B
Push Button Switch Cover
(Clear)
3/8 - 27 NS-2B
Push Button Switch Cover
(Gray)
15/32 - 32 NS-2B
Indicator Plate
Quantity/Card
Cat. No.
2
774020
100
774020BK†
.93 Height × .62 Base Dia.
2
774117
100
774117BK†
2
774087
100
774087BK†
10
774099
100
774099BK†
.59 Height x .60 Base Dia. x .34 ID
15/32” Diameter
.72 Height x .62 Base Dia. x .42 ID
1.03 x .62 Hole Diameter
†Bulk Package of 100
Double Insulated Plastic Toggle Switches
■
■
Great for outdoor, marine/recreational
equipment, automotive and weather
resistant applications
■
1/2 in. diameter mounting hole
■
Bulk packaging available upon request
H
Double-insulated with an internal “O” ring
design for moisture and dust resistance
L
Product
C
W
Rating
Termination
No. of
Dimensions
Style
Terminals Amps 125 VAC Amps 250 VAC (L0 × W0 × H0 )
Cat. No.
Description
Poles
Circuitry
Double Insulated, Plastic Toggle Switch
SPST
On-Off
Screw
2
20
10
1.37 × .76 × .94
774019
Double Insulated, Plastic Toggle Switch
SPST
On-Off
Spade
2
20
10
1.37 × .76 × .94
774098
Double Insulated, Plastic Toggle Switch
SPDT
(On)-Off-(On)
Spade
3
20
10
1.37 × .76 × .94
774004
Double Insulated, Plastic Toggle Switch
DPDT
(On)-Off-(On)
Spade
6
20
10
1.37 × .76 × .94
774006
US
1-800-435-0705 for Customer Service
( ) Denotes momentary action
www.idealindustries.com
G-5
Toggle Switches
■
L
Full-Size Rocker Switches
■
For commercial appliances, industrial controls, automotive and marine applications
■
Moisture- and dust-resistant
■
Suitable for low-voltage DC applications
■
Recommended .8300 × 1.4500 mounting hole, .1250 panel thickness
■
Operating temperature: 32°F to 185°F (0°C to 85°C)
■
Bulk packaging available upon request
Rocker Switches
Product
H
Amps 125
VAC
Rating
Amps 277
VAC
HP 110-250
VAC
2
20
15
Spade
4
20
On-(Off)
Spade
4
DPDT
On-On
Spade
Black Rocker Switch
DPDT
(On)-On
Black Rocker Switch
DPDT
On-Off-On
Poles
Circuitry
Termination
Style
No. of
Terminals
Black Rocker Switch
SPST
On-Off
Spade
Black Rocker Switch
DPST
(On)-Off
Black Rocker Switch
DPST
Black Rocker Switch
Description
W
Dimensions
(L0 × W0 × H0)
Cat. No.
2
1.70 × .97 × 1.09
774045
15
2
1.70 × .97 × 1.09
774120
20
15
2
1.70 × .97 × 1.09
774121
6
20
15
2
1.70 × .97 × 1.09
774050
Spade
6
20
15
2
1.70 × .97 × 1.09
774122
Spade
6
20
15
2
1.70 × .97 × 1.09
774040
774040BK†
C
US
G-6
***
Black Rocker Switch
DPDT
(On)-Off-On
Spade
6
20
15
2
1.70 × .97 × 1.09
Black Rocker Switch***
DPDT
(On)-Off-(On)
Spade
6
15
10*
3/4**
1.70 × .97 × 1.09
774123
774054
774054BK†
Red Lighted Rocker***
Switch
DPST
On-Off
Spade
4
15
10*
3/4**
1.70 × .97 × 1.09
774056
Amber Lighted Rocker***
Switch
DPST
On-Off
Spade
4
15
10*
3/4**
1.70 × .97 × 1.09
774055
( ) Denotes momentary action
www.idealindustries.com
*Amps 250 VAC
**HP 125-250VAC
†Bulk package of 100
1-800-435-0705 for Customer Service
Supplies
L
Appliance Rocker Switches
■
Great for home appliances, computer equipment, automotive and industrial controls
■
Appliance Rockers fit standard .550 × 1.120 panel cut outs
■
Miniature Rockers fit .5200 × .7760 panel cut outs
■
Plain and lighted versions available
■
Operating temperature: 32°F to 185°F (0°C to 85°C)
■
Bulk packaging of 100 available upon request
Description
Rocker
Appliance Rocker Switch
Poles Circuitry
H
Termination No. of
Style
Terminals
SPST
On-Off
Spade
2
SPDT
On-On
Spade
3
Black
Dimensions
(L0 × W0 × H0)
Ratings
774038
774049
16 Amp 1/3 HP 125 VAC,
10 Amp 1/2 HP 250 VAC
SPDT On-Off-On
Spade
Cat. No.
1.24 × 68 × .77 774049BK†
774059
3
774059BK†
Red Lighted
SPST
On-Off
Spade
3*
16 Amp 1/3 HP 125 VAC,
10 Amp 1/2 HP 250 VAC
1.24 × 68 × .77
774039
774060
Appliance Rocker Switch
Amber Lighted SPST
On-Off
Spade
3*
16 Amp 125 VAC, 10 Amp 250 VAC
1.24 x 68 x .77
774060BK†
**
C
Appliance Rocker Switch**
Visi-Red,
Printed
On-Off
Vertical
SPST
On-Off
Spade
2
16 Amp 125 VAC, 10 Amp 250 VAC,
3/4 HP 125-250 VAC
1.24 × 68 × .72
774047
Appliance Rocker Switch**
Visi-Red
SPST
On-Off
Spade
2
16 Amp 125 VAC, 10 Amp 250 VAC,
3/4 HP 125-250VAC
1.24 × 68 × .72
774052
Miniature Rocker Switch
Red Lighted
SPST
On-Off
Spade
3*
16 Amp 1/3 HP 125 VAC,
10 Amp 1/2 HP 250 VAC
.83 × .59 × .50
774048
US
†Bulk Package of 100
1-800-435-0705 for Customer Service
*3rd terminal to power lighted rocker
www.idealindustries.com
G-7
Rocker Switches
Product
W
Push-Button Switches
■
Great for household appliances, lamps and motor controls
■
Available in normally open, normally closed and standard On-Off circuitry
■
Wire leads are #18 AWG, 60 stripped wire
■
1/2 in. diameter mounting hole
■
Bulk packaging of 100 available upon request
Push-Button Switches
Dimensions
(L0 × W0 × H0)
Cat. No.
2
6 Amp 125VAC,
1 Amp 250VAC,
10 Amp 14VDC
.66 × .53 × .32
774082
Screw
2
3/4 Amp 125VAC/DC,
1/4 Amp 250VAC/DC
.66 Dia. × 1.89
774083
On-(Off)
Screw
2
3/4 Amp 125VAC/DC,
1/4 Amp 250VAC/DC
.66 Dia. × 1.89
774084
SPST NO
(On)-Off
Screw
2
6 Amp 120VAC,
3 Amp 240VAC
.88 × .54 × .35
774022
Red Plastic
SPST NC
On-(Off)
Screw
2
3 Amps 120VAC,
1.5 Amp 240VAC
.88 × .54 × .35
774023
Black Plastic
SPST
On-Off
Wire Leads
2
8 Amp 125VAC/DC,
4 Amp 250VAC/DC,
10 Amp 125VAC,
1/3 HP 125VAC
.98 × .64 × .62
774021
Maintained Contact
Push-Button Switch*
Nickel Plated
SPST
On-Off
Wire Leads
2
6 Amp 125VAC,
3 Amp 250VAC
.97 × .80 × .36
774024
Maintained Contact
Push-Button Switch*
Brass Plated
SPST
On-Off
Wire Leads
2
6 Amp 125VAC,
3 Amp 250VAC
.97 × .80 × .36
774025
Maintained Contact
Push-Button Switch**
Nickel Plated
SPST
On-Off
Screw
2
6 Amp 125VAC/DC,
3 Amp 250VAC/DC
1.18 × .52 × .54
774080
Maintained Contact
Push-Button Switch**
Nickel Plated
SPST
On-Off
Screw
2
15 Amp 125VAC,
10 Amp 250VAC
.92 × .66 × .46
774081
Momentary Contact
Push-Button Switch**
Nickel Plated
SPST NO
(On)-Off
Screw
2
15 Amp 125VAC,
10 Amp 250VAC
1.38 × .58 × .60
Momentary Contact
Push-Button Switch**
Nickel Plated
15 Amp 125VAC,
10 Amp 250VAC
1.38 × .58 × .60
Description
*C
G-8
Termination No. of
Style
Terminals
W
Ratings
Product
**
H
L
Actuator
Poles
Circuitry
Miniature
Push-Button Switch*
Black Plastic
SPST
On-Off
Wire Lead
Round Body
Push-Button Switch**
Black Plastic
SPST NO
(On)-Off
Round Body
Push-Button Switch**
Black Plastic
SPST NC
Momentary Contact
Push-Button Switch
Black Plastic
Momentary Contact
Push-Button Switch
Maintained Contact
Push-Button Switch
US
†Bulk Package of 100
www.idealindustries.com
SPST NC
On-(Off)
Screw
2
774085
774085BK†
774086
( ) Denotes momentary action
1-800-435-0705 for Customer Service
Supplies
H
Lever and Pull Chain Switches
W
■
Use for ceiling fixtures, lamps and fans
■ Wire leads are #18 AWG, 60 stripped wire
■ Push in connectors for #18 AWG wire
■ 13/32 in. diameter mounting hole
■ Bulk packaging of 100 available upon request
C
US
Description
Pull-Chain
Poles
Color
Circuitry
Termination
Type
Circuit
Rating
Amps Amps
Amps
125 VAC 250 VAC 125 VL
Dimensions
(L0 × W0 × H0)
Cat. No.
All-Angle Lever Switch*
Nickel
SPST
On-Off
Wire Leads
2 Pos - 2 Wire
6
3
—
1.50 × 1.28 × .50
774035
Pull Chain
Nickel
SPST
On-Off
Wire Leads
2 Pos - 2 Wire
6
3
3
.92 × .88 × .67
774031
Pull Chain
Brass
SPST
On-Off
Wire Leads
2 Pos - 2 Wire
6
3
3
.92 × .88 × .67
774032
2-Speed Pull Chain*
Brass
SPDT
Off-On-On
Push-In
3 Pos - 3 Wire
6
3
6
1.43 × 1.25 × .73
774033
3-Speed Pull Chain*
Brass
SPTT
Off-On-On-On
Push-In
4 Pos - 4 Wire
6
3
—
1.43 × 1.25 × .73
774034
3-Speed Pull Chain
Brass
SPTT
Off-On(A)-On(B)On(A+B)
Wire Leads
4 Pos - 3 Wire
6
3
—
.87 × 1.05 × .65
774037
*
W
Cord Switches
H
■
Place your lighting controls in a convenient location with a lamp cord toggle switch
■
Available in brown or ivory
■
Bulk packaging available upon request
Product
Description
Cord Switch
Cord Switch
L
Color
Poles
Circuitry
Termination
Style
Ratings
Dimensions
(L0 × W0 × H0)
Ivory
SPST
On-Off
Pass Thru
6 Amp 125VAC, 3 Amp 250VAC,
3 Amp 125VT
1.38 × .62 × .73
6 Amp 125VAC, 3 Amp 250VAC,
3 Amp 125VT
1.38 × .62 × .73
Brown
SPST
On-Off
Pass Thru
Cat. No.
774072
774072BK†
774071
774071BK†
774074
Cord Toggle Switch
Ivory
SPST
On-Off
Pass Thru
10 Amp 125VAC, 5 Amp 250VAC
2.50 × .83 × 1.28
Cord Toggle Switch
Brown
SPST
On-Off
Pass Thru
10 Amp 125VAC, 6 Amp 250VAC
2.50 × .83 × 1.28
774074BK†
774073
†Bulk Package of 100
1-800-435-0705 for Customer Service
www.idealindustries.com
G-9
Switches
Product
L
Door and Slide Switches
W
■
Standard slide switch fits 9/16” x 7⁄8” opening
■
Door switches are great for closets, turning the light on when the door is open and off when it is closed
■
Door switch kit comes with metal box, cover plate and mounting hardware
L
H
Product
Description
Color
Poles
Circuitry
Termination
Style
Slide Switch
Black Slide
SPST
On-Off
Solder Terminals
Ratings
10 Amp 125VAC,
5 Amp 250VAC
Dimensions
(L0 × W0 × H0)
Cat. No.
1.38 × .44 × .30
774051
Switches
774026K
AC/DC Door Switch Kit
White Button
SPST
Normally On-(Off)
Wire Leads
10 Amp 1/3 HP 125/250VAC 1.25 × 2.75 × 2.0
774026KBK†
Door Replacement Switch
C
US
White Button
( ) Denotes momentary action
SPST
Normally On-(Off)
Wire Leads
10 Amp 1/3 HP 125/250VAC 1.17 × .69 × .98
774026
†Bulk package of 25
Rotary Switches
■
Rotary switches are perfect for household appliances, ceiling fixtures and lamps
■
Single or three-position switches available
■
#18 AWG, 60 stripped wire leads
■
Bulk packaging available upon request
Product
Description
H
L
Color
Poles
Circuitry
Termination
Style
Ratings
Dimensions
(L0 × W0 × H0)
Black Plastic
SPST
On-Off
Wire Leads
3 Amp 125VAC, 1.5 Amp 250VAC
.60 Dia ×
.730 overall height
W
Cat. No.
774063B
Rotary Switch
774063BK†
Rotary Switch
Brass Plated
SPST
On-Off
Wire Leads
6 Amp 125VAC, 3 Amp 250VAC
.97 × .80 × .39
774061
3-Way Rotary Switch
Brass Plated
SPTT
Off-On(A)-On(B)On(A+B)
Wire Leads
6 Amp 125VAC, 3 Amp 250VAC
.86 × 1.03 × .34
774062
Rotary Switch
Black Plastic
SPST
On-Off
Wire Leads
6 Amp 125VAC, 3 Amp 250VAC
.89 × .79 × .31
774069
†Bulk Package of 100
G-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
Flush Indicator Lights
Bezel
■
Base
Nylon body with flush transparent polycarbonate lens and stainless steel bezel
6 in. wire leads
■ 1/2 in. mounting diameter
■ Lamp voltage is AC/DC
■
R
Bulk packaging available upon request
Product
Description
Lens Color
Lamp Voltage
Lamp Type
Termination Style
Height (Base0 × Bezel0)
Cat. No.
Flush Indicator Light
Red
14V
Incandescent
60 Wire Leads
.91 × .10
775121*
Flush Indicator Light
Red
28V
Incandescent
60 Wire Leads
.91 × .10
776121*
Flush Indicator Light
Red
125V
Neon
60 Wire Leads
.91 × .10
777121*
Flush Indicator Light
Green
125V
Neon
60 Wire Leads
.91 × .10
777221*
Flush Indicator Light
Amber
125V
Neon
60 Wire Leads
.91 × .10
777321*
Raised Indicator Lights
Lamp
■
Nylon body with raised transparent polycarbonate lens and stainless steel bezel
■
1/2 in. mounting diameter
■
Lamp voltage is AC/DC
■
Bulk packaging available upon request
Bezel
Base
UL
R
Product
Lens Color
Lamp Voltage
Lamp Type
Termination Style
Height
(Base0 × Bezel0 × Lamp0)
Cat. No.
Red
14V
Incandescent
60 Wire Leads
.91 × .10 × .20
775111*
Raised Indicator Light
Red
28V
Incandescent
60 Wire Leads
.91 × .10 × .20
776111*
Raised Indicator Light
Green
28V
Incandescent
60 Wire Leads
.91 × .10 × .20
776211*
Raised Indicator Light
Amber
28V
Incandescent
60 Wire Leads
.91 × .10 × .20
776311*
Raised Indicator Light
Red
125V
Neon
60 Wire Leads
.91 × .10 × .20
Raised Indicator Light
Green
125V
Neon
60 Wire Leads
.91 × .10 × .20
Raised Indicator Light
Amber
125V
Neon
60 Wire Leads
.91 × .10 × .20
777311*
Raised Indicator Light
Blue
125V
Neon
60 Wire Leads
.91 × .10 × .20
777411*
Raised Indicator Light
Clear
125V
Neon
60 Wire Leads
.91 × .10 × .20
777511*
Raised Indicator Light
Red
250V
Neon
60 Wire Leads
.91 × .10 × .20
778111*
Raised Indicator Light
Green
250V
Neon
60 Wire Leads
.91 × .10 × .20
778211*
Raised Indicator Light
Red
28V
Incandescent
.1870 Spade
1.09 × .10 × .20
776112
Raised Indicator Light
Red
125V
Neon
.1870 Spade
1.09 × .10 × .20
777112
Raised Indicator Light
Green
125V
Neon
.1870 Spade
1.09 × .10 × .20
777212
Description
Raised Indicator Light
*VDE certified
777111*
777111BK†
777211*
777211BK†
†Bulk Package of 100
1-800-435-0705 for Customer Service
www.idealindustries.com
G-11
Indicator Lights
■
UL
Miniature Indicator Lights
Bezel
Indicator Lights/Battery Clips
■
Nylon body with flush transparent polycarbonate lens
■
6 in. wire leads
■
5/16 in. mounting diameter
■
Lamp voltage is AC/DC
■
Bulk packaging available upon request
Base
UL
R
Description
Lens Color
Lamp Voltage
Lamp Type
Termination Style
Height (Base0 × Bezel0)
Cat. No.
Miniature Indicator Light
Red
125V
Neon
60 Wire Leads
1.43 × .13
777131
Miniature Indicator Light
Green
125V
Neon
60 Wire Leads
1.43 × .13
777231
Miniature Indicator Light
Amber
125V
Neon
60 Wire Leads
1.43 × .13
777331
Product
Battery Clips
H
■
Great for testing and many other electrical applications
■
Insulated grips are color-coded for positive (red) and negative (black) identification
■
For screw and/or crimp connections
Product
L
Description
Amps
Dimensions
(L0 × H0)
Jaw Opening
Wire Diameter
Quantity
Cat. No.
Miniature General Purpose Clip
5
1-17/32 x 15/32
5/16”
9/64”
2
770218L
General Purpose Clip
10
2 x 5/8
1/2”
3/16”
1 Red/1 Black
170207L
Test and Battery Clip
20
2-1/2 x 5/8
5/8”
3/16”
1 Red/1 Black
170208L
Test and Battery Clip
30
2-1/2 x 5/8
5/8”
3/16”
1 Red/1 Black
170209L
Copper Test & Battery Clips*
40
2-7/16 x 11/16
5/8”
3/16”
2
770217L
Copper Test & Battery Clips*
75
3 x 15/16
3/4”
9/32”
2
770216L
Copper Test & Battery Clips*
100
4-7/64 x 19/16
1-1/16”
11/30”
2
770215L
Insulated Grips for 770217L
—
3-1/2 x 3/4 ID
—
—
1 Red/1 Black
770223L
Insulated Grips for 770216L
—
3-7/8 x 11/64 ID
—
—
1 Red/1 Black
770219L
Insulated Grips for 770215L
—
5 x 1-13/32 ID
—
—
1 Red/1 Black
770221L
*Insulators sold separately
G-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
Alligator Clips
■
Great for temporary connections, testing wires and troubleshooting projects
■
Spring-loaded, grab-tight jaws make these clips quick and easy-to-use
■
For screw and/or crimp connections
Description
H
Amps
Dimensions (L0 × H0)
Jaw Opening
Wire Gauge
Quantity
Cat. No.
Non-Insulated
—
2 × 7/16
5/160
#22 - #14
4
770200L
Insulated Barrel
—
2-1/2 × 7/16
5/160
#22 - #14
1 Red/1 Black
770204L
Fully Insulated
—
2-1/2 × 7/16
5/160
#22 - #14
1 Red/1 Black
770205L
Plier-Type Battery Clamps
H
■
Great for battery charging and test equipment
■
Insulated grips are color-coded for positive (red) and negative (black) identification
■
For crimp or solder connections
Product
Description
L
Amps
Dimensions (L” × H”)
Jaw Opening
Wire Dia.
Quantity
Cat. No.
Plier-Type Battery Clip,
Steel
50
2-7/8 x 2
1-1/8 ”
9/32”
1 Red/1 Black
770213L
Plier-Type Battery Clip,
Copper
75
2-7/8 x 2
1-1/8 ”
9/32”
1 Red/1 Black
770212L
Plier-Type Battery Clip,
Copper
400
6 x 4-1/2
1-9/16”
9/16”
1 Red/1 Black
770225L
NM Cable Connectors
Spacer Shims
■ Unique snap-in detents hold fitting
firmly in place – eliminates the
need for screws, lock nuts or
clamps
■ Eliminates the need to cut plate
screws for “GFCI” decorator devices
when installing on tile, marble, etc.
■ Supports loose outlets
■ UL Listed and CSA Certified for
14/2, 14/3, 12/2, 12/3, 10/2, 10/3
and for double-runs of 14/2 and
12/2 NM sheathed cable
Description
12 in. NM Cable Connector
1-800-435-0705 for Customer Service
■ Prevents broken face plates
■ Snaps over #6, #8, #10 screws
■ Also works as a shim
Quantity
Cat. No.
100
1050
Description
Quantity
Cat. No.
5
772450
Caterpillar
25
172451
Caterpillar
500
772451
Caterpillar
www.idealindustries.com
G-13
Miscellaneous Supplies
Product
L
Flange-Type Plastic Anchors
Flange-Type Plastic Anchor Kits
■ Multi-purpose use in solid materials or hollow walls, will not fall
through
■ Kits include flange-type anchors, slotted/Phillips head screws
and masonry bit
■ For use with sheet-metal or wood screws
■ Convenient plastic storage container
Anchors
■ High-impact plastic construction resists moisture, corrosion and
deterioration
Description
Screw
Size
Drill
Size (In.)
Quantity
Cat. No.
Yellow – 7/8 in. long
6-8-10
3/16
100
90-041
Red – 1 in. long
10-12
1/4
100
90-042
White – 1-1/2 in. long
14-16
5/16
50
90-044
G-14
www.idealindustries.com
Contents
Cat. No.
100 # 6-8-10 x 7/8 in. Flange-type anchors, 100 # 8 x 1 in. combohead, sheet-metal screws & 1-3/16 in. masonry bit (carbide-tipped)
90-051
100 # 10-12 x 1 in. Flange-type anchors, 100 # 10 x 1-1/4 in. combocombo-head, sheet-metal screws & 1-1/4 in. masonry bit (carbide-tipped)
90-052
100 # 10-12 x 1 in. Flange-type anchors, 100 # 12 x 1 in. combo-head,
sheet-metal screws & 1-1/4 in. masonry bit (carbide-tipped)
90-053
40 # 14-16 x 1-1/2 in. Flange-type anchors, 40 # 14 x 1-1/2 in. combohead, sheet-metal screws 1-5/16 in. masonry bit (carbide-tipped)
90-054
100 # 10-12 x 1 in. Flange-type anchors, 100 # 10 x 1 in. combo-head,
sheet-metal screws & 1-1/4 in. masonry bit (carbide-tipped)
90-055
1-800-435-0705 for Customer Service
Supplies
Grommets*
Universal Metal
Stud Bushings
■ Installs instantly! Flexible PVC
grommets side slotted 1/16”
for quick installation
■ Non-metallic stud bushing fits
all hole configurations you are
likely to encounter in pre-punched
steel studs
■ Snap into holes in electrical
boxes, sheet metal, auto
firewalls and more
Miscellaneous Supplies
■ Protects wire without falling out of the hole
AB C
■ Black, PVC, flexible, 60
durometer
Description
■ Long pulls of cable slide smoothly through the bushing, make
a difficult job easier
A
■ Prevents steel and other sharp
edge chafing of wire insulation
or cording
CODE VIOLATION
E
A
SHARP EDGE
NM CABLE
D
A
B
C
D
E
Quantity
Cat. No.
1/4” Grommets
9/16
.37
1/4
.28
3/32
6
774114
1/4” Grommets
9/16
.37
1/4
.28
3/32
25
774116
1/4” Grommets
9/16
.37
1/4
.28
3/32
1,000
774114BK
3/8” Grommets 43/64
.49
3/8
.28
1/16
5
774138
3/8” Grommets 43/64
.49
3/8
.28
1/16
25
774137
1/2” Grommets 55/64
.69
1/2
.25
1/16
4
774112
1/2” Grommets 55/64
.69
1/2
.25
1/16
25
774113
3/4” Grommets 15/64
1.0
3/4
.31
1/16
3
774134
3/4” Grommets 15/64
1.0
3/4
.31
1/16
25
774136
*Buchanan branded
Common hole configurations
in metal studs.
B
A
D
C
Description
A
B
C
D
Quantity
Cat. No.
Stud Bushing
5.670
2.50
.505
1.30
25
772271
Wire Marker
Booklets*
■ Self-sticking on wire
and cable
■ Perforated 1/4” x 1-1/2”
markers
■ For applications above or
below ground
■ Resists abrasion, moisture,
dirt and oil
■ Non-smear black legend ensures high visibility
Legend
Quantity
Cat. No.
0-9
45
775101
A-Z, 0-15, +, -, /
10
775102
1-45
10
775103
46-90
10
775104
*Buchanan branded
1-800-435-0705 for Customer Service
www.idealindustries.com
G-15
Multi-Purpose Cable Ties
■ General purpose cable tie for every day bundling
and cable management
■ UL recognized
Size
Cable Ties
Miniature Ties
4”
4”
4”
4”
8”
8”
Intermediate Ties
6”
6”
6”
6”
11”
11”
Standard Ties
8”
8”
8”
8”
8”
8”
8”
11”
11”
11”
11”
11”
14”
14”
14”
14”
Heavy-Duty Ties
11”
11”
14”
14”
17"
17"
21"
21"
24"
24"
30"
30"
36"
36"
48"
48"
G-16
Color
Tensile
Strength
(lbs.)
Pkg.
Qty.
Cat. No.
Natural
Natural
UV Black
UV Black
Natural
UV Black
18
18
18
18
18
18
100
1000
100
1000
100
100
B-4-18-9-C
B-4-18-9-M
B-4-18-0-C
B-4-18-0-M
B-8-18-9-C
B-8-18-0-C
Natural
Natural
UV Black
UV Black
Natural
UV Black
40
40
40
40
40
40
100
1000
100
1000
100
100
B-6-40-9-C
B-6-40-9-M
B-6-40-0-C
B-6-40-0-M
B-11-40-9-C
B-11-40-0-C
Natural
Natural
Natural
UV Black
UV Black
Red
Green
Natural
Natural
Natural
UV Black
UV Black
Natural
Natural
UV Black
UV Black
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
500
1000
100
1000
100
100
100
300
500
100
500
100
500
100
500
B-8-50-9-C
B-8-50-9-D
B-8-50-9-M
B-8-50-0-C
B-8-50-0-M
B-8-50-2-C
B-8-50-5-C
B-11-50-9-C
B-11-50-9-300
B-11-50-9-D
B-11-50-0-C
B-11-50-0-D
B-14-50-9-C
B-14-50-9-D
B-14-50-0-C
B-14-50-0-D
Natural
UV Black
Natural
UV Black
Natural
UV Black
Natural
UV Black
Natural
UV Black
Natural
UV Black
UV Black
Natural
Natural
UV Black
120
120
120
120
175
175
175
175
175
175
175
175
175
175
175
175
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
B-11-120-9-C
B-11-120-0-C
B-14-120-9-L
B-14-120-0-L
B-17-175-9-L
B-17-175-0-L
B-21-175-9-L
B-21-175-0-L
B-24-175-9-L
B-24-175-0-L
B-30-175-9-L
B-30-175-0-L
B-36-175-0-L
B-36-175-9-L
B-48-175-9-L
B-48-175-0-L
www.idealindustries.com
Size
Color
Assorted Cable Tie Packages
B-AST-4811-9-7C Includes:
4”
Natural
8”
Natural
11”
Natural
B-ASST-650C Cannister Includes:
4”
Assorted
4”
Natural
8”
Natural
11”
Natural
B-ASST-500C Cannister Includes:
4”
Natural
6”
Natural
8”
Natural
B-AST-48-0-200 Tube Includes:
4”
UV Black
8”
UV Black
B-AST-48-9-200 Tube Includes:
4”
Natural
8”
Natural
Mounting Ties
6”
Natural
8”
Natural
8”
UV Black
14”
Natural
14”
UV Black
Mounting Pads
3/4” x 3/4”
Natural
3/4” x 3/4”
UV Black
1” x 1”
Natural
1” x 1”
UV Black
Cable Clamps
1/8"
Natural
1/4"
Natural
3/8"
Natural
1/2"
Natural
Installation Tools
Tighten-n-Trim Cable Tie Tool
Standard Cable Tie Tool
Tensile
Strength
(lbs.)
Pkg.
Qty.
Cat. No.
18
50
50
200
300
200
B-4-18-9-C
B-8-50-9-C
B-11-50-9-C
18
18
50
50
200
100
300
50
—
B-4-18-9-C
B-8-50-9-C
B-11-50-9-C
18
40
50
200
100
200
B-4-18-9-C
B-6-40-9-C
B-8-50-9-C
18
50
100
100
B-4-18-0-C
B-8-50-0-C
18
50
100
100
B-4-18-9-C
B-8-50-9-C
30
50
50
50
50
100
100
100
100
100
B-6-30MT-9-C
B-8-50MT-9-C
B-8-50MT-0-C
B-14-50MT-9-C
B-14-50MT-0-C
N/A
N/A
N/A
N/A
100
100
100
100
BMP-750-9-C
BMP-750-0-C
BMP-1000-9-C
BMP-1000-0-C
N/A
N/A
N/A
N/A
100
100
100
100
BCCL-125-9-C
BCCL-250-9-C
BCCL-375-9-C
BCCL-500-9-C
BCTT-100
BCTT-200
1-800-435-0705 for Customer Service
Supplies
How to Select Resurfacer Grade
Tool-Type Resurfacer
Small Motor and Pocket Resurfacers
Grade code letters designate the following grade combinations:
A Medium/Finish
G Coarse/Medium
B Coarse/Finish
H Medium/Polish
D Finish/Polish
All Other Resurfacers
Resurfacers for commutators and copper-alloy slip rings are made
in five grades:
X Extra coarse—very fast cutting, for “hogging” off excessive copper
C Coarse — fast cutting
M Medium — for general use, high mica, small ridges and burns
F Finish—for use after the three grades above, for periodic
application and for removing small burns and ridges immediately
after their appearance
P Polish—very fine grade (220 aggregate grain) for burnish finish
■ For use in lathe-turning
device
For all resurfacers, specify grade by adding the appropriate letter as
a suffix to the catalog number. (Example: 80-475M for medium grade.)
Pencil-Type Resurfacer
Size is always written length x width x thickness (working face area
x depth of stone). For handle types, the handle is mounted parallel
to the first dimension. Always use a resurfacer with the largest
face possible (length x width). Thickness should be governed by
clearance around commutator or ring.
Commutator Resurfacers
The resurfacer should have a width of approximately 3/4 the length
of the commutator bar and as long as will conveniently go between
the brush riggings. For periodic application, three or four sizes are
generally sufficient. After determining approximate dimensions,
select nearest standard size and type.
Slip Ring Resurfacers
When space permits, use a resurfacer about 1 in. wider than the face
width of the ring. Length should be at least three times greater
than the longest flat spot to bridge over and ensure a true ring.
Sizes (Inches)
Grades
80-504*
1 x 1-1/2 x 6-1/2
1x2x8
80-461*
2x2x8
80-475*
*Add grade letter suffix to Cat. No. Please allow 2-3 weeks for delivery.
■ For use on fans, signal motors,
auto generators, locomotive
headlight motors and other
fractional horsepower
motors
Size (Inches)
Grades
Cat. No.
5/8 x 3/8 x 6
C, M, F, P
80-075*
*Add grade letter suffix to Cat. No. Please allow 2-3 weeks for delivery.
Tramway-Handle Resurfacer
■ Handle shaped to ensure secure grip
■ 10-1/2 in. handle permanently
mounted at 45° angle
Sizes (Inches)
2 x 1-1/2 x 2
■ Different grades of
stone on each end
2x2x2
■ 10 in. handle
80-454*
C, M, F, P
T
W
Small Motor-Type Resurfacer
Cat. No.
3/4 x 3/4 x 3
Grades
C, M, F, P
L
Cat. No.
80-255*
80-265*
*Add grade letter suffix to Cat. No. Please allow 2-3 weeks for delivery.
■ For use on small fractional horsepower motors
Size (Inches)
Grades
Cat. No.
3/4 x 1/2 x 3/8
A, B, D, G, H
80-012*
*Add grade letter suffix to Cat. No. Please allow 2-3 weeks for delivery.
1-800-435-0705 for Customer Service
www.idealindustries.com
G-17
Commutator Maintenance
How to Select Resurfacer Size
■ Two resurfacers required for
each grinder
Powr-Polish™ Flexible Abrasive
Commutator Smoothie® Resurfacing Tool
■ Fine-grain, non-dusting
abrasive held together
by a flexible bond
■ Serves as both
commutator cleaner
and burnisher
Commutator Maintenance
■ Designed to smooth commutators of auto generators, starting
motors and other similar equipment
■ Removes dirt and grease—
imparts super-finished surface
■ 8-1/2 in. plastic handle with a 5/16 in. x 7/8 in. x 11/16 in.
resurfacer on each end
■ Non-conductive and
non-loading
■ Features one polish-grade and one finish-grade resurfacer
■ Bent handle reaches into any motor frame
■ Non-conductive for user safety
Sizes (Inches)
Cat. No.
3/8 x 1/2 x 5
82-001
Description
Cat. No.
82-002
Commutator Smoothie® Resurfacing Tool
80-033
5/8 x 1 x 5
82-003
Please allow 2-3 weeks for delivery.
1x2x5
82-004
1x4x5
82-005
1/8 x 1 x 5
82-006
3/8 x 3/4 x 5
Please allow 2-3 weeks for delivery.
Brush Seater and Commutator Cleaner
■ Gentle acting abrasive for seating carbon brushes and cleaning
commutators and slip rings
■ Soft, loosely bound grain produces a scouring effect when held
against commutator
■ Will not remove or scratch copper
■ Self-cleaning
■ Available in soft(S), medium(M) and hard(H) grades
Sizes (Inches)
Grades
Cat. No.
1/4 x 1/4 x 4-3/4
M, H
23-001*
1/2 x 1/4 x 4-3/4
M, H
23-002*
3/8 x 3/8 x 4-3/4
M, H
23-003*
1/2 x 3/8 x 4-3/4
S, M, H
23-004*
1/2 x 1/2 x 4-3/4
S, M, H
23-005*
5/8 x 1/2 x 4-3/4
S, M, H
23-006*
3/4 x 1/2 x 4-3/4
S, M, H
23-007*
1-1/8 x 5/8 x 4-3/4
S, M, H
23-008*
1/2 x 1 x 4-3/4
S, M, H
23-027*
1 x 1 x 4-3/4
—
23-035S
2 x 1 x 4-3/4
—
23-036S
3x2x4
—
23-039S
3x2x6
—
23-041S
3x2x8
—
23-042S
*Add grade letter suffix to Cat. No.
Please allow 2-3 weeks for delivery.
G-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Alphabetical Index
Page
Item
Page
1000 Amp Clamp Meter…………E-13
Arbors, Hole Saw ………………C-48
1000V Insulated Screw-Holding
Screwdriver ……………………C-45
Auger Bit Extensions ……………C-52
10-in-1 Screwdriver/Nutdriver …C-29
310 Series Digital Meter …………E-7
Item
Page
Item
Page
CCTV/Security Tester,
SecuriTEST™ ……………………F-8
C
Cabinet Tip Screwdrivers ………C-27
Cell Phone Pouch ………………C-39
Augers …………………………C-52
Cable Certification Testers,
LANTEK® ……………………F-2, F-3
Center Conductor Cutter ………F-11
Augers, RESI-MASTER™
Heavy-Duty Ship ………………C-52
Cable Cutter, Ratcheting ………C-30
400 Amp Clamp Meter …………E-11
Automatic Blade Lock
Measuring Tape ………………C-33
Cable Cutters ……………C-19, C-23
4-in-1 Test Tool …………………E-10
Aviation Tin Snips ………………C-56
Cable Cutters, Long-Arm ………C-30
5-in-1 Non-Conductive
Screwdriver/Nutdriver
Awl ………………………………C-28
Cable Cutters, NM………………G-13
3-Phase Power Analyzer …E-20, E-21
3-Phase/Motor Rotation Tester …E-30
Auger Bits, Nailbiter™ Ship ……C-52
Cable Gripping Gloves …………B-12
………C-45
5-in-1 Screwdriver/Nutdriver …C-29
Cable Cutter, Telco Ratcheting …C-30
B
Cable Lockout …………………D-38
Circuit Breaker Lockout
System …………………………D-25
Circuit Breaker Lockout System,
Oversized ………………………D-23
Circuit Breaker Lockouts,
Miniature ………………………D-24
Circuit Identifiers ………………E-24
Cable Pulling Lubricant,
Aqua-Gel® CW …………………B-11
Circuit Tester, SureTest® Arc ……E-25
Cable Pulling Lubricant,
Aqua-Gel® II ……………………B-11
Circuit Tracers, SureTest® ………E-17
Bag, Cable Tie ……………………D-2
600 Series Pocket Meter …………E-7
Bag, Lockout/Tagout ……………D-20
61-350 Series Meters ……………E-5
Bags, Large Mouth ……………C-41
6-in-1 Twist-a-Nut™
Tapping Tool ……………………C-25
Ball Valve Lockout Devices ……D-38
7-in-1 Twist-a-Nut™
Screwdriver ……………………C-24
Barrier Strips ……………………A-26
9-in-1 Ratch-a-Nut™
Screwdriver ……………………C-24
Bases, Screw Mounting …………D-6
Cable Pulling Lubricant,
Aqua-Gel® IIP …………………B-11
Basic Data & Video Kit …………F-18
Cable Ripper………………………C-7
Battery Clamps, Plier-Type………G-13
Cable Service Kit…………………F-20
Battery Clips ……………………G-12
Cable Service/Termination Kit …F-20
A
Circuit Analyzers, SureTest® ……E-23
Cable Performance Tester,
SIGNALTEK™ ………………F-5, F-6
600 Amp Clamp Meter …………E-12
Barricade Tapes …………………D-18
Channel Clamps…………………A-62
Circuit Tester ……………………E-29
Circuit Testers, E-Z Check® ……E-25
Circuit Tracers, SureTest®
Open/Closed……………………E-16
Clamp Adapters, Current ………E-31
Clamp Adapters, Flexible ………E-31
Clamp Meter Selection Guide ……E-9
Clamp Meter, 1000 Amp ………E-13
Abrasive, Powr-Polish™
Flexible …………………………G-18
B-CAP® Wire Connectors ………A-36
Cable Slitting Tool, Round ………F-13
Belt Bag™ Supplies Pouch ……C-40
Cable Splicing Kit ………………F-11
ABS™ Signal Thrower™ …………F-9
Belts ……………………………C-39
Cable Splicing Knife ……………F-11
ABS™ Tester ………………………F-9
Bender Handles …………………B-13
Accessories, Grounding ………A-15
Bender Putter ……………………B-12
Cable Stacker, Plastic
Insulated ………………………D-10
Accessories, Heat Gun …………D-15
Bender, Pocket Guide …………B-14
Cable Staples ……………………D-10
Accessories, Toggle Switch ………G-5
Benders, Aluminum ……………B-13
Cable Staples, Data ……………D-11
Accessory Kits, Tuff-Rod™
Fishing Pole ……………………B-7
Benders, Conduit ………………B-13
Cable Staples, Fiber Insulated …D-11
Benders, Ductile Iron ……………B-13
Cable Straps, Coaxial……………D-11
Adapter, Thermocouple ……E-4, E-32
Bilingual Lockouts & Tags………D-40
Cable Stripper, Coax ……………F-12
Adapters, Current Clamp ………E-31
Bits, Flexible Drill ………………C-54
Cable Stripper, Coax/UTP ………F-12
Adapters, Flexible Clamp ………E-31
Bits, Installer ……………………C-52
Cable Stripper, Cyclops® Data …F-12
Adapters, Modular ………………F-10
Blades, Die-Type……………C-9, C-10
Cable Stripper, UTP ……………F-12
Adjustable Cable Lockout ………D-38
Blades, Hacksaw …………B-14, C-56
Cable Strippers …………………F-27
ClearGlide™ Wire Pulling
Lubricant ………………………B-10
Adjustable Can Light
Hole Saw ………………………C-49
Blades, Knife-Type ………C-13, C-14
Cable Strippers, UTP/STP/
Coaxial …………………………F-12
Clips, Alligator …………………G-13
Adjustable Wrenches……………C-32
Block, Grounding ………………F-17
Alligator Clips……………………G-13
BNC Coaxial Connectors ………F-22
Aluminum Benders ……………B-13
BNC Compression Connectors …F-15
Aluminum Safety Lockout
Padlocks ………………………D-39
Booklets, Wire Marker …………D-16
Amplifier Probe ……………………F-9
Analog Clamp Meter ……………E-14
Blades, Reciprocating ……C-50, C-51
Booklets, Write-On Wire ………D-16
Box, Group Lock ………………D-20
Analog Multimeters ………………E-8
Breaker Lockout, Hinged
Single-Pole ……………………D-24
Anchor Kits, Flange-Type
Plastic …………………………G-14
Breaker Lockout, Large …………D-23
Cable Tie Bag ……………………D-2
Cable Tie Installation Tools ………D-9
Cable Ties, Multi-Purpose ………G-16
Cable Ties, Powr-Tie™ ………D-4, D-5
®
Cable Ties, Pro-Met
……………D-3
Carbon Steel Staples ……………D-10
Cards, Wire Marker ……………D-17
Brush Seater Cleaner……………G-18
Cards, Write-On Marker ………D-17
Aqua-Gel® CW Cable
Pulling Lubricant ………………B-11
B-TAP® Connectors ……………A-40
Carriers, Foam …………………B-16
Bucket Bag Tool Carrier…………C-40
Carrying Case Selection Guide …E-32
Aqua-Gel® II Cable
Pulling Lubricant ………………B-11
Bushings, Universal
Metal Stud ……………………G-15
Carrying Cases …………………E-32
Aqua-Gel® IIP Cable
Pulling Lubricant ………………B-11
Butt Splices ………………A-21, A-22
Arbor Extension, Hole Saw ……C-48
Clamp Meter, Leakage Current …E-14
Clamps …………………………A-32
Clamps ……………………………D-7
Clamps, Channel ………………A-62
Clamps, Plier-Type Battery………G-13
Cleaner, Brush Seater …………G-18
Cleaner, Commutator……………G-18
Clips, Battery ……………………G-12
CMP Compression Connectors …F-15
Coax Cable Stripper ……………F-12
Coax Connector Tool ……………F-17
Coax Strip & Crimp Tool……C-6, F-13
Coax Strippers …………………F-12
Can Light Hole Saw,
Adjustable ……………………C-49
Breaker Lockout, Universal ……D-24
Apron, Supplies …………………C-40
Clamp Meter, Ground
Resistance ……………………E-18
Cables ……………………………F-24
Breaker Lockout, Single-Pole …D-23
Appliance Rocker Switches ……G-7
Clamp Meter, Analog ……………E-14
Coax Stripmaster®
Wire Strippers …………………F-12
Carbon Steel Service
Entrance Staples ………………D-11
Anti-Oxidant, Noalox® ……A-28, B-12
Clamp Meter, 600 Amp …………E-12
Cable, RS-232 ……………………E-4
Breaker Lockout, Multi-Pole ……D-23
Anchors, Flange-Type Plastic …G-14
Clamp Meter, 400 Amp …………E-11
Cases, Carrying …………………E-32
Cases, Fish Tape Replacement …B-6
CAT 6 Modular Plugs ……………F-24
Coax Strippers, Toggle® …………F-12
Coax/UTP Cable Stripper ………F-12
Coaxial Cable Straps ……………D-11
Coaxial Connectors, BNC ………F-22
Coaxial Connectors, F-Series……F-16
Coaxial Selection Chart …………F-25
Combo Cases™ …………………E-15
Combo Tool ………………………C-6
Commutator Cleaner ……………G-18
Commutator Smoothie®
Resurfacing Tool ………………G-18
Compression Connector
Installer Kit ……………………F-20
Alphabetical Index
1
Index
Item
Item
Page
Compression Connectors,
BNC ……………………………F-15
Compression Connectors,
CMP ……………………………F-15
Compression Connectors, Mini …F-16
Compression Connectors,
Universal ………………………F-15
Compression F-Connector
Port Seals ………………………F-16
Compression Tool, Economy ……F-15
Compression Tools, OmniSeal™…F-15
Compression Tools,
OmniSeal™ Pro …………………F-15
Index
Conduit Benders ………………B-13
Conduit Deburring Tool,
Twist-a-Nut™ …………………B-12
Item
Page
Item
Page
Item
Page
Current Clamp Adapters ………E-31
Electrician's Hole Saw Kit ………C-48
Foam Carriers ……………………B-16
Custom Stripmaster® Lite
Wire Strippers ……………C-8, C-9
Electrician's Knife ………………C-33
Folding Saw ……………………C-56
Electrician's Scissors ……………F-11
Four-Way Crimp Tool ……………A-39
Custom Stripmaster®
Wire Strippers ……………C-8, C-9
Electrician's Step Bit Kit…………C-53
Four-Way Crimp Tool
Electrician's Tool Pouch …………C-39
Four-Way Indent Tool ……………F-17
End Caps, Thermo-Shrink® ……D-14
F-Series Coaxial Connectors ……F-16
Engraving Tools …………………C-32
Full-Size Rocker Switches ………G-6
Entrance Staples, Carbon
Steel Service …………………D-11
Fuse Blockout Device …………D-37
Cutters, Rotary BX/MC ……C-7, C-31
Entrance Straps, Plastic
Insulated Service ………………D-11
Fuse Pullers ……………………C-45
Cutters, T®-Cutter Wire …………C-4
Ergonomic Hacksaw ……B-14, C-56
Cyclops® Data Cable Stripper …F-12
Extensions, Auger Bit……………C-52
Cutter, Center Conductor ………F-11
Cutter, PowerBlade™ Cable ……C-30
Cutter, Serrated …………………F-26
Cutters, Cable ……………C-19, C-23
Cutters, NM Cable………………G-13
D
Extra Heavy-Duty Toggle
Switches …………………………G-4
®
E-Z Check Circuit Testers ……E-25
…………C-31
Fuse Pull & Test Light …………C-45
G
Gate Valve Lockouts ……………D-38
Generator, Tone……………………F-9
Gloves, Cable Gripping …………B-12
Conduit Markers ………………D-17
Data Cable Staples ……………D-11
Conduit Measuring Tape ………B-15
Data T®-Cutter …………………F-11
Connector Removal Tools ………F-22
Data T®-Cutters …………………C-6
Connector Tool, Coax ……………F-17
Data/Video Kit …………………F-18
Fault Finder, Visual ……………………
Connectors, BNC Coaxial ………F-22
DataComm Tool Kits ……………F-17
Fiber Inspection Microscope ……F-28
Connectors, B-TAP® ……………A-40
Deburring Tools, Twist-a-Nut™ Conduit
C-25
Fiber Insulated Cable Staples …D-11
Deluxe Cable Service Kit ………F-20
Fiber Optic Swabs ………………F-27
Detectable Underground
Tapes …………………………D-18
Fiber Stripper, Lite-Strip™
Optical …………………………F-26
Device, Fuse Blockout …………D-37
Diagonal-Cutting Pliers …C-18, C-21
Fiber Stripper, MiniLite-Strip™
Optical …………………………F-26
Grounding Connectors …………A-14
Die Sets, Crimpmaster™ …F-13, F-14
Fiberglass-Handled Hammer …C-32
Grounding Connectors,
Powr-Connect™ ………………A-32
Connectors, Crimp ………………A-27
Connectors, F-Series Coaxial……F-16
Connectors, Grounding …………A-14
Connectors, Insulation
Displacement …………………F-24
Connectors, Mini Compression …F-16
Connectors, Powr-Connect™
Grounding ……………………A-32
Greenie® Grounding Connector …A-5
F
Fiber Optic Scribes ………………F-27
Die-Type Blades ……………C-9, C-10
FIBERTEK™ ………………………F-5
Connectors, Push-On ……………F-16
Digital Cable Splitter ……………F-17
Field Application Kits, Fish Tape …B-6
Connectors, Tap …………………A-40
Digital Light Meter ………………E-30
Films, Polishing …………………F-27
Connectors, Tap Splice …………A-22
Digital Meter, 310 Series …………E-7
Fish Tape Field Application Kits …B-6
Connects, Quick…………………A-25
Diplexer …………………………F-17
Fish Tape Leaders ………………B-6
Continuity Tester…………………E-29
Disconnect, PowerPlug™
Luminaire ………………………A-11
Fish Tape Puller …………………B-6
Disconnects …A-18, A-19, A-20, A-21
Fish Tape Selection Chart ………B-3
Cord Switches ……………………G-9
Dispenser, Wire Marker…………D-17
Fish Tape Swivel Ball ……………B-6
Covers……………………………A-63
Divider Pouch™ Small
Parts Bag ………………………C-40
Fish Tape, Rapid-Pak® ………B-3, B-5
Fish Tape, Thumb-Winder™ …B-3, B-5
Door Switches …………………G-10
Fish Tape, Tuff-Grip™ Pro……B-3, B-4
Double Insulated Plastic Toggle
Switches …………………………G-5
Fish Tapes, Tuff-Grip™ ……………B-5
Contractor-Grade
Multimeters…………………E-3, E-6
Covers, Terminal Strip …………A-25
Crimp Connectors ………………A-27
Crimp Connectors,
Pre-Insulated …………………A-27
Crimp Connectors, Splice Cap …A-39
Crimp Terminals …………………A-16
Crimp Tool ………………………C-31
Crimp Tool & Mechanical
Indentor ………………………C-31
Crimp Tool, Coax Strip & ………F-13
Crimp Tool, Four-Way …………A-39
Drill Bits …………………………C-53
D-Sub/Double-D Service Tool …F-11
Duct Seal ………………………B-12
Ductile Iron Benders ……………B-13
Ductile Iron Hickeys ……………B-14
E
Fish Tape Replacement Cases……B-6
Fish Tapes, Zoom™ ………………B-5
Fishing Poles, Tuff-Rod™ …………B-7
Flange-Type Plastic Anchor Kits G-14
Flange-Type Plastic Anchors ……G-14
Flash Protection
Labels & Signs …………………D-42
Flexible Abrasive,
Powr-Polish™ …………………G-18
Crimp Tool, Heavy-Duty…………C-31
Economy 10Base-T Kit …………F-19
Flexible Bit Extension ……………C-55
Crimp Tool, Ratchet ……………C-31
Economy CATV Compression
Kit ………………………………F-18
Flexible Bit Replacement Tool …C-55
Economy Compression Kit ………F-18
Flexible Bits, Masonry …………C-55
Economy Compression Tool ……F-15
Flexible Bits, Screw Point ………C-54
Economy Data & CATV Kit ………F-17
Flexible Bits, Serrated …………C-54
Economy Round Cable and
Wire Cutter ……………………F-11
Flexible Clamp Adapters ………E-31
Crimp Tools, 4-Way Indent ………F-17
Crimp Tools, Crimpmaster™ ……F-13
Crimpmaster™ 10Base-T Kit ……F-19
Crimpmaster™ Crimp Tools ……F-13
Crimpmaster™ Die Sets …F-13, F-14
Crimpmaster™ F-Type
Connector Kit …………………F-21
Crimpmaster™ Twisted Pair Kit …F-19
2
Alphabetical Index
Electric Plug Lockout ……………D-37
Electrician's Carrier™ Tool Bag …C-41
Flexible Bits, High-Speed ………C-55
Flexible Drill Bits ………………C-54
Flexible Tubing ……………………D-7
Flush Indicator Lights …………G-11
Grip-N-Strip™ End Stripper………C-7
Gripper Pads ……………………C-11
Grips, Tenite ……………………C-23
Grommets ………………………G-15
Ground Resistance Clamp
Meter……………………………E-18
Grounding Accessories …………A-15
Grounding Block…………………F-17
Grounding Connector, Greenie® …A-5
Grounding Tails …………………A-15
Group Lock Box …………………D-20
Guide, Pocket Bender …………B-14
H
Hacksaw Blades …………B-14, C-56
Hacksaw, Ergonomic ……B-14, C-56
Hacksaw, Heavy-Duty ……B-14, C-56
Hacksaw, Mini …………………C-56
Halar® Ties ………………………D-2
Hammer …………………………C-32
Hammer Holder …………………C-39
Hand Tools,
Laseredge™…………C-16 thru C-19
Hand Tools,
WireMan ……………C-20 thru C-23
Hand-held Insulation Tester,
MEGGER® ………………………E-19
Handles, Bender…………………B-13
Handles, Hickey …………………B-14
Handling Ties ……………………D-2
Hasps, Safety Lockout …………D-40
Hawkbill Knife …………………C-33
Heat Elite Heat Gun Kit …………D-15
Heat Elite Plus Heat Gun Kit ……D-15
Heat Elite Pro Heat Gun Kit ……D-15
Heat Gun Accessories …………D-15
Heat Gun Kit, Heat Elite ………D-15
Heat Gun Kit, Heat Elite Plus …D-15
Heat Gun Kit, Heat Elite Pro ……D-15
Alphabetical Index
Page
Item
Page
®
Item
Page
Item
Page
Heat Shrink Kit,
Thermo-Shrink® ………………D-15
Insulation Tester, MEGGER
Hand-held………………………E-19
Level, Torpedo …………………C-33
Long-Nose Pliers …………C-18, C-22
Lever Switches ……………………G-9
Lugs, Termend® …………………A-39
Heat Shrinkable
Tubing ……………D-12, D-13, D-14
Insulators, Splice Cap …………A-39
Lever™-Snips Electrician's
Scissors …………………………F-11
Heavy-Duty Crimp Tool …………C-31
In-Sure™ Push-In Wire
Connectors ……………………A-12
Insulators, Wrap-Cap® …………A-27
M
Light Meter ………………………E-30
Magnetic Hand Strap ………E-3. E-5
Light-Duty Toggle Switches ……G-4
Magnetic-Tip Measuring Tape …C-33
Lights, Flush Indicator …………G-11
Markers, Conduit ………………D-17
Lights, Miniature Indicator ……G-12
Jab Saw …………………………C-56
Markers, Voltage ………………D-17
Lights, Raised Indicator…………G-11
Marking Pens ……………D-17, D-39
Hickey Handles …………………B-14
Jacket Stripper,
Simplex/Duplex ………………F-26
Line Packages …………………B-16
Masonry Flexible Bits……………C-55
Hickeys …………………………B-14
Jacks, Surface……………………F-23
Line Splitter………………………E-31
Hickeys, Ductile Iron ……………B-14
Journeyman Electrician's
Tote™ …………………………C-41
Lineman's Jack Knife ……………C-33
Master Electrician's
Hole Saw Kit……………………C-48
LinkMaster™ PRO SL Tester ……F-7
Master Electrician's Tote™………C-41
LinkMaster™ PRO Tester …………F-7
Measuring Tape,
Automatic Blade Lock
Heavy-Duty Hacksaw ……B-14, C-56
Heavy-Duty Lockout Tags ………D-40
Heavy-Duty Toggle
Switches……………………G-2, G-3
Hex-Key Sets ……………………C-33
High-Speed Flexible Bits ………C-55
High-Temperature
Wire Connectors ………………A-3
Hinged Single-Pole Breaker
Lockout…………………………D-24
Hip Holster Tool Pouch …………C-39
Hole Saw Arbor Extension
……C-48
J
Jumpers …………………A-25, A-63
LinkMaster™ Tester ……………F-10
K
Keystone Tip Screwdrivers………C-27
Kinetic™ Reflex™ T®-Stripper
Wire Strippers …………………C-3
Hole Saw Arbor Replacement
Bits ……………………………C-48
Kinetic™ Super Wire Strippers …C-3
Hole Saw Arbors ………………C-48
Kit, Modular Plug Tool …………F-10
Hole Saw Kit, Electrician's ………C-48
Kits,
DataComm…………F-17, F-18, F-19,
F-20, F-21
Hole Saw ………………………C-48
Lockout/Tagout …D-19, D-20, D-21
Test Lead ………………………E-33
Hole Saw Kit,
Master Electrician's ……………C-48
Hole Saw Kits ……………………C-48
Hole Saw, Adjustable
Can Light ………………………C-49
Kit, Cable Splicing ………………F-11
Measuring Tape, Conduit ………B-15
Load Centers ……………………D-16
Mechanical Indentor &
Crimp Tool ……………………C-31
Lock Box, Group ………………D-20
Lock Labels ……………………D-39
Lock Stations ……………………D-20
Locking Cable, Python™
Adjustable ……………………D-41
Lockout Devices, Ball Valve ……D-38
Lockout Hasps, Safety …………D-40
Lockout Padlocks ………………D-39
Lockout Padlocks, Aluminum
Safety …………………………D-39
Knife, Cable Splicing ……………F-11
Lockout Signs …………………D-42
Knife, Electrician's ………………C-33
Knife, Hawkbill …………………C-33
Lockout System,
Circuit Breaker…………………D-25
Knife, Insulated …………………C-44
Lockout Tags, Heavy-Duty………D-40
Knife, Lineman's Jack …………C-33
Lockout, Adjustable Cable ……D-38
Knife, Utility ……………………C-33
Lockout, Cable …………………D-38
IDEAL Wipes™ …………………C-32
Knife-Type Blades…………C-13, C-14
Lockout, Electric Plug …………D-37
Identification Ties…………………D-6
Knives, Pocket …………………C-33
Identifiers, Circuit ………………E-24
K-type Thermocouple ………E-4, E-32
Lockout, Hinged Single-Pole
Breaker…………………………D-24
Hole Saws ………………………C-47
Hole Saws, Recessed Lighting …C-49
Hole Saws, Tungsten
Carbide Grit ……………………C-49
I
Indicator Lights, Flush …………G-11
Indicator Lights, Miniature ……G-12
Lockout, Large Breaker …………D-23
L
Lockout, Multi-Pole Breaker ……D-23
Indicator Lights, Raised…………G-11
Labels, Flash Protection
………D-42
Lockout, Single-Pole Breaker …D-23
Industrial Lockout/Tagout
Station …………………………D-22
Labels, Lock ……………………D-39
Lockout, Universal Breaker ……D-24
Industrial-Grade Multimeters ……E-4
Infrared Thermometer …………E-30
Installation Tools, Cable Tie………D-9
Installer Bits ……………………C-52
Installer Kit ………………………F-21
Insulated Knife …………………C-44
Insulated Nutdrivers ……………C-44
LANTEK 6 Cable Certification
Tester ………………………F-2, F-3
Lockout/Tagout Kit, Basic ………D-19
LANTEK® 6A Cable
Certification Tester …………F-2, F-3
Lockout/Tagout Kit,
Plant Facility ……………………D-21
LANTEK® 7G Cable
Certification Tester …………F-2, F-3
Lockout/Tagout Kit, Standard …D-20
LANTEK® Selection Guide ………F-4
Lockout/Tagout
Kits ………………D-19, D-20, D-21
®
Large Breaker Lockout …………D-23
………C-33
Lite-Strip™ Optical
Fiber Stripper …………………F-26
Lockout/Tagout Kit, Industrial …D-21
Lockout/Tagout Kit, Starter ……D-19
Measuring Tape, Magnetic-Tip …C-33
Mechanical Lugs,
Powr-Connect™ …A-29, A-30, A-31,
A-32, A-33
Mechanic's Tool Bag ……………C-41
Medium Toggle Switches ………G-4
MEGGER® 3-Pole Meter ………E-18
MEGGER® 4-Pole Meter ………E-18
MEGGER® 5kV
Insulation Tester ………………E-19
MEGGER® Earth Resistance
Lead Set Kit ……………………E-18
MEGGER® Hand-held
Insulation Tester ………………E-19
Metal Insulated Staple …………D-10
Meter, 1000 Amp Clamp ………E-13
Meter, 310 Series Digital …………E-7
Meter, 400 Amp Clamp …………E-11
Meter, 600 Amp Clamp …………E-12
Meter, 600 Series Pocket …………E-7
Meter, Analog Clamp ……………E-14
Meter, Ground Resistance
Clamp …………………………E-18
Meter, Leakage Current Clamp …E-14
Meter, Light ……………………E-30
Meter, MEGGER® 3-Pole ………E-18
Meter, MEGGER® 4-Pole ………E-18
Meter, Split-Jaw™ Smart ………E-28
Meters, 61-350 Series ……………E-5
Microscope, Fiber Inspection……F-28
Mini Coax Stripper ………………F-17
Mini Compression Connectors …F-16
Laseredge™ Tool Kits ……C-34, C-35
Lockout/Tagout
Large Mouth Bag ……………D-20
Laseredge™ Hand
Tools…………………C-16 thru C-19
Lockout/Tagout Station,
Industrial ………………………D-22
Mini Laser Level…………………C-33
Insulated Tool Kits ………………C-43
Lead Set Kit, MEGGER® Earth
Resistance ……………………E-18
Lockout/Tagout
Training Manuals ………………D-22
Insulated Tools ………C-42 thru C-45
Leaders, Fish Tape ………………B-6
Lockouts, Bilingual ……………D-40
Insulation Displacement
Connectors ……………………F-24
Leads, Test ………………………E-33
Lockouts, Gate Valve ……………D-38
MiniLite-Strip™ Optical
Fiber Stripper …………………F-26
Leakage Current Clamp Meter …E-14
Lockouts, Plug …………………D-37
Mini™ Augers ……………………C-52
Insulation Tester, MEGGER®
5kV ……………………………E-19
Level, Mini Laser ………………C-33
Lockouts, Wall Switch …………D-37
Modular Adapters ………………F-10
Long-Arm Cable Cutters ………C-30
Modular Plug Tool Kit……………F-10
Insulated Pliers …………………C-44
Insulated Screwdrivers …………C-44
Insulated Staples ………………D-10
Insulated Tool Cases ……………C-44
Large Mouth Bags ………………C-41
Mini Hacksaw …………………C-56
Miniature Circuit Breaker
Lockouts ………………………D-24
Miniature Indicator Lights………G-12
Alphabetical Index
3
Index
Item
Item
Page
Modular Plugs, CAT 6……………F-24
Modular Plugs, TelCom …………F-24
Monster-Wipes™ ………………B-12
Motor-Type Resurfacer, Small …G-17
Mounting Bases, Screw …………D-6
Mounting Channels ……………A-62
Mounting Head Ties ……………D-6
Item
Page
Plastic Anchor Kits,
Flange-Type ……………………G-14
Pro Installer Kit …………………F-21
Ripper, Cable ……………………C-7
Probe, Amplifier …………………F-9
Plastic Anchors, Flange-Type …G-14
Rocker Switches, Appliance ……G-7
Pro-Met® Cable Ties ……………D-3
Plastic Insulated Cable
Stacker …………………………D-10
Rocker Switches, Full-Size ………G-6
Pro-Pull™ Rope …………………B-15
Rope, Pro-Pull™ …………………B-15
Pro-Series® Shackless
Lock & Hasp …………………D-41
Rotary BX/MC Cutters ……C-7, C-31
Index
Plastic Insulated Staples ………D-10
Multi-Crimp Tools ………C-19, C-23
Plastic Polishing Fixture …………F-27
Multimedia Cable Tester, VDV ……F-8
Plates, Wall ………………………F-23
Multimedia Qualification Tester,
SIGNALTEK™ ……………………F-6
PlatinumPro® Multimeters …E-3, E-4
Multimeters, Industrial-Grade ……E-4
Multimeters, PlatinumPro® …E-3, E-4
Multi-Pole Breaker Lockout ……D-23
Multi-Purpose Cable Ties ………G-16
Multi-Wire Pulling Leaders ………B-6
Plenum Ties ………………………D-2
Pliers …………………C-17 thru C-22
Pliers, Diagonal-Cutting …C-18, C-21
Pliers, Insulated …………………C-44
Pliers, Premium Electrician's
Side-Cutting ……………………C-17
Pliers, Side-Cutting ………C-17, C-21
Pliers, Tongue & Groove …C-19, C-22
Pliers. Long-Nose…………C-18, C-22
Plier-Type Battery Clamps ………G-13
Plug Lockouts …………………D-37
N
ProVision®, 490 Series Software …E-4
Pull-Chain Switches………………G-9
Puller, Fish-Tape …………………B-6
Pullers, Fuse ……………………C-45
Pullers, Safe-T-Grip® Fuse ………C-45
Pulling Leaders, Multi-Wire ………B-6
Pull-Line, Powr-Fish® ……………B-15
NM Cable Cutters ………………G-13
Plugs, TelCom Modular …………F-24
Ringing Tool ……………………F-13
Rotary Switches …………………G-10
Round Cable Slitting Tool ………F-13
RS-232 Cable ……………………E-4
S
Safe-T-Grip® Fuse Pullers ………C-45
Safety Lockout Hasps …………D-40
Pull-Line, Value-Line™ …………B-15
Safety Lockout Padlocks,
Aluminum………………………D-39
Punch Down Tools ………………F-10
Safety Signs ……………………D-42
Push-Button Switches ……………G-8
Satellite & Digital TV Splitters …F-16
Push-In Wire Connectors,
In-Sure™ ………………………A-12
Saw Blades, Portable Band ……C-51
Push-On Connectors ……………F-16
Putter, Bender……………………B-12
Python™ Adjustable
Locking Cable …………………D-41
Saw, Folding ……………………C-56
Saw, Jab …………………………C-56
Saws, Hole ………………………C-47
Scissors, Electrician's ……………F-11
Scissors, Lever™-Snips …………F-11
Plugs, CAT 6 Modular……………F-24
Nailbiter™ Ship Auger Bits ……C-52
Page
Ring, Terminals……………A-16, A-17
Multi-Crimp Strip Tool ……………C-6
Multimeters,
Contractor-Grade …………E-3, E-6
Item
Premium T -Stripper
Wire Stripper ……………………C-4
Plastic Insulated Service Entrance
Straps …………………………D-11
Multimeters, Analog………………E-8
Page
®
Pigtail Wire Connectors,
Term-a-Nut® ……………………A-13
Mounting Pads……………………D-7
Multimeter Selection Guide ………E-2
Item
Q
Screw Mounting Bases …………D-6
Pocket Bender Guide……………B-14
NM Cable Dual-Hole T®-Stripper
Wire Stripper ……………………C-5
Quick Connects …………………A-25
Pocket Knives ……………………C-33
Quick-Rotating Screwdrivers …C-28
NM Cable T®-Stripper
Wire Strippers …………………C-5
Pocket Pal™ Tool Holster ………C-40
Screw Point Flexible Bits ………C-54
Screwdriver Sets ………………C-26
Screwdriver, 1000V Insulated
Screw-Holding …………………C-45
Pocket Meter, 600 Series …………E-7
R
Screwdriver,
7-in-1 Twist-a-Nut™……………C-24
Noalox® Anti-Oxidant ……A-28, B-12
Polishing Films …………………F-27
Raised Indicator Lights …………G-11
Non-Contact Voltage Tester ……E-29
Polishing Fixture, Plastic…………F-27
Rapid-Pak® Fish Tape ………B-3, B-5
Non-Contact Voltage Tester,
VoltAware™ ……………………E-29
Polishing Fixture,
Stainless Steel …………………F-27
Ratch Wrench……………………A-10
Screwdriver,
9-in-1 Ratch-a-Nut™ …………C-24
Port Seals, Compression
F-Connector ……………………F-16
Ratchet Crimp Tool ……………C-31
Screwdriver, Twist-a-Nut™ ……A-10
Non-Detectable Underground
Tapes …………………………D-18
Ratchet Telemaster™ ……………F-10
Portable Band Saw Blades ……C-51
Screwdriver, Twist-a-Nut™ Pro™
Electrician's ……………………C-25
Nutdriver Set ……………………C-29
Ratcheting Cable Cutter ………C-30
Pouches, Tuff-Tote™
Cell Phone ……………………C-39
Receptacle Testers ………………E-25
Screwdriver/Nutdriver, 10-in-1 …C-29
Nutdrivers, Insulated ……………C-44
Recessed Lighting Hole Saws …C-49
Screwdriver/Nutdriver, 5-in-1 …C-29
Reciprocating Blades ……C-50, C-51
Screwdriver/Nutdriver, 5-in-1
Non-Conductive ………………C-45
Nutdrivers, Nutmaster® …A-10, C-29
Nutmaster® Nutdrivers……A-10, C-29
O
Pouches, Zipper …………………C-40
Power Analyzer, 3-Phase …E-20, E-21
PowerBlade™ Cable Cutter ……C-30
®
Reflex™ Premium T -Stripper Wire
Strippers …………………………C-3
OmniSeal™ Compression Tools …F-15
OmniSeal™ Pro Compression
Tools ……………………………F-15
Oversized Circuit Breaker
Lockout System ………………D-23
PowerPlug™ Luminaire
Disconnect ……………………A-11
Powr-Connect™ Grounding
Connectors ……………………A-32
Powr-Connect™ Mechanical
Lugs …A-29, A-30, A-31, A-32, A-33
Screwdrivers, Insulated …………C-44
Removal Tools, Connector ………F-22
Screwdrivers, Quick-Rotating …C-28
Replacement Bits,
Hole Saw Arbor ………………C-48
Screwdrivers, Screw-Holding …C-28
Replacement Cases, Fish Tape …B-6
Screwdrivers, Slotted
Cabinet Tip ……………………C-27
Powr-Connect™ Mechanical
Solderless Lugs ………………A-33
Replacement Parts
Selection Guide ………………E-34
Residential Compression Kit ……F-18
Padlocks, Lockout ………………D-39
Powr-Connect™ Tap
Connectors ……………………A-31
Padlocks, Steel …………………D-39
Powr-Fish® Pull-Line ……………B-15
Pads, Gripper ……………………C-11
P
Packages, Line …………………B-16
Screwdrivers …………C-26 thru C-29
Reflex™ Super T -Stripper Wire
Strippers …………………………C-3
®
Screwdrivers, Phillips ……………C-28
Screwdrivers, Slotted ……………C-27
Screwdrivers, Slotted
Keystone Tip……………………C-27
RESI-MASTER™ Heavy-Duty
Ship Augers ……………………C-52
Screwdrivers, Square Head ……C-28
Resurfacer, Pencil-Type …………G-17
Seal, Duct ………………………B-12
Pads, Mounting …………………D-7
Powr-Polish™ Flexible
Abrasive ………………………G-18
Resurfacer, Small Motor-Type …G-17
Parallel Splices …………………A-22
Powr-Tie™ Cable Ties ………D-4, D-5
Resurfacer, Tool-Type ……………G-17
SecuriTEST™ CCTV/Security
Tester ……………………………F-8
Pencil-Type Resurfacer …………G-17
Pre-Insulated Crimp
Connectors ……………………A-27
Resurfacer, Tramway-Handle …G-17
Selection Chart, Coaxial …………F-25
Resurfacing Tool, Commutator
Smoothie®………………………G-18
Selection Chart, Fish Tape ………B-3
RG-6 Push-On Connector Kit …F-19
Selection Guide, Clamp Meter……E-9
Pens, Marking ……………D-17, D-39
Phillips Screwdrivers ……………C-28
4
Alphabetical Index
Premium Electrician's
Side-Cutting Pliers ……………C-17
Screw-Holding Screwdrivers ……C-28
Selection Guide, Carrying Case …E-32
Alphabetical Index
Page
®
Item
Page
Item
Page
®
Item
Page
Stacker, Plastic
Insulated Cable ………………D-10
Strippers, Super T -Stripper
Wire………………………………C-4
TelCom Modular Plugs …………F-24
Selection Guide, Multimeter ……E-2
Selection Guide, Replacement
Parts ……………………………E-34
Stainless Steel
Polishing Fixture ………………F-27
Strippers, Wire…………C-2 thru C-14
Telemaster™ Telephone Tool ……F-10
Standard Toggle Switches …G-2, G-3
Telephone Tool, Telemaster™ ……F-10
Selection Guide, T®-Stripper
Wire Stripper ……………………C-2
Stud Bushings,
Universal Metal ………………G-15
Staple, Metal Insulated …………D-10
Super T®-Stripper
Selection Guide, Wire Pulling
Lubricant ………………………B-8
Staples, Cable …………………D-10
Wire Strippers …………………C-4
Term-a-Nut® Pigtail
Wire Connectors ………………A-13
Staples, Carbon Steel …………D-10
Serrated Combination
Flexible Bits ……………………C-54
Staples, Carbon Steel
Service Entrance ………………D-11
Super T®-Stripper Wire Strippers,
Static Dissipative ………………C-4
Term-a-Nut® Terminal Wire
Connectors ……………………A-16
Supplies Apron …………………C-40
Serrated Cutter …………………F-26
Termend® Lugs …………………A-39
Staples, Data Cable ……………D-11
Supplies Pouch, Belt Bag™ ……C-30
Service Compression Kit ………F-19
Staples, Fiber Insulated Cable …D-11
SureTest® Arc Circuit Tester ……E-25
Terminal Blocks……A-44, A-46, A-48,
A-50, A-52, A-54, A-56, A-58, A-60
Service Tool, D-Sub/Double-D …F-11
Staples, Insulated ………………D-10
SureTest® Circuit Analyzer ………E-23
Terminal Strip Covers ……………A-25
Set-Screw Holder ………………A-28
Staples, Plastic Insulated ………D-10
SureTest® Circuit Tracers ………E-17
Terminal Strips ……………A-23, A-24
Set-Screw Wire Connectors ……A-28
Static Dissipative Wire Stripper …C-5
Terminals, Crimp ………………A-16
Seven-In-One Stripper……………C-6
Stations, Lock……………………D-20
SureTest® Open/Closed
Circuit Tracers …………………E-16
Shackless Lock & Hasp,
Pro-Series® ……………………D-41
Steel Padlocks …………………D-39
Surface Jacks ……………………F-23
Terminals, Spade …………A-17, A-18
Step Bit Kit, Electrician's ………C-53
Switch, Toggle Accessories ………G-5
Test Lead Kits ……………………E-33
Step Drill Bits ……………………C-53
Switches, Appliance Rocker ……G-7
Test Leads ………………………E-33
Strap, Magnetic Hand ………E-3. E-5
Switches, Cord ……………………G-9
Test Light, Fuse Puller & ………C-45
Straps, Coaxial Cable……………D-11
Switches, Door …………………G-10
Test Tool, 4-in-1 …………………E-10
Straps, Plastic Insulated Service
Entrance ………………………D-11
Switches, Double Insulated
Plastic Toggle ……………………G-5
Tester Pouches, Tuff-Tote™ ……C-39
Straps, Shoulder…………………C-39
Switches, Extra Heavy-Duty
AC/DC Toggle …………………G-4
Selection Guide, LANTEK
…………
Shims, Spacer …………………G-13
Shoulder Straps …………………C-39
Side-Cutting Pliers ………C-17, C-21
SIGNALTEK™ Cable Performance
Tester ………………………F-5, F-6
SIGNALTEK™-FO Multimedia
Qualification Tester………………F-6
Signs, Flash Protection …………D-42
Signs, Lockout …………………D-42
Signs, Safety ……………………D-42
Simplex/Duplex
Jacket Stripper …………………F-26
Single-Pole Breaker Lockout……D-23
Straps, Sound……………………D-11
Streetlight Kits ……………A-41, A-42
Stripmaster® Lite
Wire Stripper ……………C-12, C-13
Stripmaster® Ribbon Fiber
Jacket Stripper …………………F-26
Switches, Full-Size Rocker ………G-6
Switches, Heavy-Duty
Toggle………………………G-2, G-3
Switches, Lever …………………G-9
Switches, Light-Duty Toggle ……G-4
Stripmaster® Wire
Stripper …………………C-12, C-13
Switches, Medium Toggle ………G-4
Slide Switches …………………G-10
Slim Electronics …………………C-29
Stripper, Grip-N-Strip™ …………C-7
Switches, Push-Button …………G-8
Small Motor-Type Resurfacer …G-17
Stripper, Mini Coax ………………F-17
Switches, Rotary…………………G-10
Socket, Spin-Twist®
Wire Connector ………………A-10
Stripper, NM Cable Dual-Hole
T®-Stripper Wire …………………C-5
Switches, Slide …………………G-10
Socket, Wire-Nut®
Wire Connector ………………A-10
Stripper, Seven-In-One …………C-6
Swivel Ball, Fish Tape ……………B-6
Solderless Lugs,
Powr-Connect™ ………………A-33
Solenoid Voltage Testers ………E-27
Sound Straps ……………………D-11
Switches, Standard Toggle …G-2, G-3
Strippers, Premium T®-Stripper
Wire ……………………………C-4
Strippers, Stripmaster® Lite
Wire………………………C-12, C-13
Stripper, Stripmaster®
Wire………………………C-12, C-13
Spade Terminals …………………A-17
Stripper, T®-Stripper Wire ………C-4
T®-Cutter Wire Cutters……………C-4
T -Cutters, Data …………………C-6
T®-Stripper Wire Stripper…………C-4
T®-Stripper Wire Stripper
Selection Guide …………………C-2
Spin-Twist Wire Connector
Socket …………………………A-10
Stripper, Underground Feeder
Cable ……………………………C-7
Splice Cap Crimp Connectors …A-39
Stripper, V-Notch …………………C-5
Tap Connectors …………………A-40
Splice Cap Insulators……………A-39
Strippers, Cable …………………F-27
Splice Kits, Thermo-Shrink® ……D-12
Strippers, Custom
Stripmaster® Wire …………C-8, C-9
Tap Connectors,
Powr-Connect™ ………………A-31
Splices, Butt ………………A-21, A-22
Splices, Parallel …………………A-22
Split Bolts ………………………A-32
Split-Jaw™ Smart Meter ………E-28
Splitter, Digital Cable ……………F-17
Splitter, Line ……………………E-31
Terminals, Ring……………A-16, A-17
Tester, 3-Phase/Motor
Rotation ………………………E-30
Tester, ABS™ ………………………F-9
Tester, Circuit ……………………E-29
Tester, Continuity ………………E-29
Tester, LinkMaster™ ……………F-10
Tester, LinkMaster™ Pro …………F-7
Tester, LinkMaster™ Pro XL ………F-7
Tester, Non-Contact Voltage ……E-29
Tester, SecuriTEST™
CCTV/Security …………………F-8
Tester, SIGNALTEK™ Cable
Performance ………………F-5, F-6
Tester, SIGNALTEK™-FO
Multimedia Qualification ………F-6
Tails, Grounding …………………A-15
Tester, VDV Multimedia Cable ……F-8
Tester, Vol-Con®
Voltage/Continuity ……………E-27
Tester, Vol-Con® XL
Voltage/Continuity ……………E-27
Tester, VoltAware™ Non-Contact
Voltage …………………………E-29
Tester, Vol-Test® Voltage …………E-27
Tester, Vol-Test® XL Voltage ……E-27
Testers, LANTEK® ……………F-2, F-3
Tap Splice Connectors …………A-22
Testers, Receptacle………………E-25
Strippers, Custom
Stripmaster® Lite Wire ……C-8, C-9
Tape, Conduit Measuring ………B-15
Test-Glo™ Circuit Tester …………E-29
Tapes, Barricade ………………D-18
Test-Pro® Multimeters ……………E-6
Strippers, Kinetic™ Reflex™
T®-Stripper Wire …………………C-3
Tapes, Detectable
Underground …………………D-18
Thermocouple Adapter ……E-4, E-32
Strippers, Kinetic™ Super Wire …C-3
Tapes, Non-Detectable
Underground …………………D-18
Thermometer, Infrared …………E-30
Splitters …………………………F-16
Strippers, NM Cable
T®-Stripper Wire …………………C-5
Splitters, Satellite &
Digital TV ………………………F-16
Strippers, Reflex™ Premium
T®-Stripper Wire …………………C-3
Split-Tip Fiber Optic Swabs ……F-27
Strippers, Reflex™ Super
T®-Stripper Wire …………………C-3
Square Head Screwdrivers ……C-28
Tenite Grips………………………C-23
Tester, Twin Lead ………………E-29
T
®
Spacer Shims ……………………G-13
®
Switches, Pull-Chain ……………G-9
Telcom Termination Kit …………F-19
Tapping Tool, 6-in-1
Twist-a-Nut™ …………………C-25
Tapping Tool, Twist-a-Nut ………C-32
Technician's Service Kit …………F-21
Telco Ratcheting Cable Cutter …C-30
Thermocouple, K-type ……E-4, E-32
Thermo-Shrink® Heat Shrink
Kit ………………………………D-15
Thermo-Shrink® Heat
Shrinkable End Caps …………D-14
Thermo-Shrink® Heat
Shrinkable Tubing ………D-13, D-14
Alphabetical Index
5
Index
Item
Item
Page
®
Item
Page
Item
Page
Thermo-Shrink Splice Kits ……D-12
Tuff-Grip™ Fish Tapes ……………B-5
Voltage Performance Monitor …E-22
Thermo-Shrink® Torch …………D-12
Tuff-Grip™ Pro Fish Tape ……B-3, B-4
Voltage Tester, Non-Contact ……E-29
Thumb-Winder™ Fish Tape …B-3, B-5
Tuff-Rod™ Fishing Poles …………B-7
Voltage Tester, Vol-Test® …………E-27
Ties, Halar® ………………………D-2
Tuff-Tote™ Cell Phone Pouches…C-39
Voltage Tester, Vol-Test® XL ……E-27
Ties, Handling ……………………D-2
Tuff-Tote™ Tester Pouches ………C-39
Voltage Testers, Solenoid ………E-27
Ties, Identification ………………D-6
Tuff-Tote™ Tool Carriers …………C-38
Voltage Testers, Vol-Con® Elite …E-26
Ties, Mounting Head ……………D-6
Tuff-Tote™ Tool Pouches ………C-38
Ties, Plenum………………………D-2
Tuff-Tote™ Ultimate
Tool Carriers ……………………C-38
Voltage/Continuity Tester,
Vol-Con® ………………………E-27
Ties, Powr-Tie™ Cable ………D-4, D-5
Ties, Pro-Met® Cable ……………D-3
Tin Snips, Aviation ………………C-56
Toggle Switch Accessories ………G-5
Index
Toggle Switches, Double Insulated
Plastic ……………………………G-5
Toggle Switches, Extra Heavy-Duty
AC/DC …………………………G-4
Toggle Switches,
Heavy-Duty ………………G-2, G-3
Toggle Switches, Light-Duty ……G-4
Toggle Switches, Medium ………G-4
Toggle Switches, Standard …G-2, G-3
Toggle® Coax Strippers …………F-12
Tone Generator ……………………F-9
Tongue & Groove Pliers …C-19, C-22
Tungsten Carbide Grit
Hole Saws ……………………C-49
Twin Lead Tester…………………E-29
Vol-Test® Voltage Tester …………E-27
Twist-a-Nut Tapping Tool ………C-32
VPM………………………………E-22
Twist-a-Nut™ 7-in-1
Screwdriver ……………………A-10
WeatherProof™ Wire Connectors A-8
Twisted Pair/Coax
Termination Kit …………………F-20
®
Tool Bag, Tool Carrier™ …………C-41
Twister® Wire Connectors ………A-6
Tool Carrier, Bucket Bag ………C-40
Tool Cases, Insulated ……………C-44
Tool Holsters, Pocket Pal™………C-40
U
Underground Feeder
Cable Stripper …………………C-7
Underground Tapes,
Detectable ……………………D-18
Underground Tapes,
Non-Detectable ………………D-18
Tool Kits ………………C-34 thru C-37
UnderGround™
Wire Connectors ………………A-8
Tool Kits, Insulated ………………C-43
Universal Breaker Lockout ……D-24
Tool Kits, Laseredge™ ……C-34, C-35
Tool Kits, WireMan™ ……C-36, C-37
Wall Switch Lockouts……………D-37
®
Twist-a-Nut™ Conduit
Wiring Kit ………………………C-25
Universal Compression
Connectors ……………………F-15
Wing-Nut Wire Connectors ……A-4
WingTwist™ Wire Connectors …A-38
Wipes ……………………………C-32
Tool Pouch, Hip Holster …………C-39
Universal Metal
Stud Bushings …………………G-15
Tool Pouches, Tuff-Tote™ ………C-38
Utility Knife ………………………C-33
Tool, Commutator Smoothie®
Resurfacing ……………………G-18
UTP Cable Stripper ………………F-12
Tools, Cable Tie Installation………D-9
Tools, Insulated ………C-42 thru C-45
Tools, Multi-Crimp ………C-19, C-23
V
Tools, Punch Down ………………F-10
Value-Line™ Pull-Line …………B-15
Tool-Type Resurfacer ……………G-17
VDV Multimedia Cable Tester ……F-8
®
Torch, Thermo-Shrink …………D-12
Torpedo Level ……………………C-33
TRACETEK™ ………………………F-5
Training Manuals,
Lockout/Tagout ………………D-22
Tramway-Handle Resurfacer……G-17
Triple-Tap Tools …………………C-32
Velocity™ Wire Pulling
Lubricant ………………………B-10
Visual Fault Finder ……………………
V-Notch Stripper …………………C-5
Vol-Con® Elite Voltage Testers …E-26
Vol-Con® Voltage/Continuity
Tester……………………………E-27
Tubing, Flexible …………………D-7
Vol-Con® XL Voltage/Continuity
Tester……………………………E-27
Tubing, Heat
Shrinkable ………D-12, D-13, D-14
Voltage Markers…………………D-17
6
Alphabetical Index
Wire Pulling Lubricant,
Velocity™ ………………………B-10
Wire Pulling Lubricant,
Yellow 77® ………………………B-9
Wire Stripper, NM Cable Dual-Hole
T®-Stripper ………………………C-5
Wire Stripper, Premium
T®-Stripper ………………………C-4
Wire Stripper, Static Dissipative …C-5
Wire Stripper, T®-Stripper ………C-4
Wire Strippers …………C-2 thru C-14
Wire Strippers,
Coax Stripmaster® ……………F-12
Wire Strippers, Kinetic™
Reflex™ T®-Stripper ……………C-3
Wire Strippers, NM Cable
T®-Stripper ………………………C-5
Wire Strippers, Reflex™
Premium T®-Stripper ……………C-3
Wire Strippers, Reflex™
Super T®-Stripper ………………C-3
Wire Strippers, Super
T®-Stripper ………………………C-4
Wire Connector Socket,
Spin-Twist® ……………………A-10
Wire Strippers, Super
T®-Stripper - Static Dissipative …C-4
Wire Connector Socket,
Wire-Nut® ………………………A-10
WireMan™
Hand Tools …………C-20 thru C-23
Wire Connector Wrench,
Wire-Nut® ………………………A-10
WireMan™ Tool Kits ………C-36, C-37
Wire Connectors, B-CAP® ………A-36
Wire-Nut® Wire Connector
Socket …………………………A-10
Wire Connectors,
High-Temperature ………………A-3
Wire-Nut® Wire Connector
Wrench …………………………A-10
Wire Connectors, In-Sure™
Push-In …………………………A-12
Wire Connectors, Set-Screw ……A-28
Wire Connectors, Term-a-Nut®
Pigtail …………………………A-13
Wire Connectors, Term-a-Nut®
Terminal ………………………A-16
Wire Connectors, Twister
………A-6
Wire Connectors,
Twister® Al/Cu …………………A-9
Wire-Nut® Wire Connectors ……A-2
WireTwist™ Wire Connectors……A-37
Wiring Kit, Twist-a-Nut™
Conduit …………………………C-25
Wrap-Cap® Insulators …………A-27
Wrench, Ratch …………………A-10
Wrench, Wire-Nut®
Wire Connector ………………A-10
Wrenches, Adjustable …………C-32
Wire Connectors, Twister Pro……A-7
Write-On Marker Cards …………D-17
Wire Connectors,
UnderGround™ …………………A-8
Write-On Wire Marker
Booklets ………………………D-16
®
UTP/STP/Coaxial
Cable Strippers …………………F-12
Wire Pulling Lubricant,
ClearGlide™ ……………………B-10
Wire Connector Chuck …………A-10
®
Tool Pouch, Electrician's ………C-39
Page
Wire Strippers, Kinetic™ Super …C-3
Twist-a-Nut™ Conduit ………………
Deburring Tools ………………C-25
Twister® Pro Wire Connectors ……A-7
Tool Carrier™ Tool Bag …………C-41
W
Wall Plates ………………………F-23
Twister Al/Cu Wire Connectors …A-9
Tool Carriers, Tuff-Tote™
Ultimate ………………………C-38
Vol-Test® XL Voltage Tester ……E-27
Twist-a-Nut™ Conduit
Deburring Tool …………………B-12
Tool Bag, Mechanic's……………C-41
Tool Carriers, Tuff-Tote™…………C-38
VoltAware™ Non-Contact
Voltage Tester …………………E-29
Twist-a-Nut Pro™ Electrician's
Screwdriver ……………………C-25
Tool Bag, Electrician's Carrier™…C-41
Tool Carriers ……………………C-38
Voltage/Continuity Tester,
Vol-Con® XL ……………………E-27
Item
Wire Connectors,
WeatherProof™ …………………A-8
Wire Connectors, Wing-Nut® ……A-4
Wire Connectors, WingTwist™ …A-38
Wire Connectors, Wire-Nut® ……A-2
Wire Connectors, WireTwist™ …A-37
Wire Cutter, Economy Round
Cable and ………………………F-11
Y
Yellow 77® Plus Wire Pulling
Lubricant ………………………B-9
Yellow 77® Wire Pulling
Lubricant ………………………B-9
Z
Wire Cutters, T®-Cutter …………C-4
Zipper Pouches …………………C-40
Wire Marker Booklets …………D-16
Zoom™ Fish Tapes ………………B-5
Wire Marker Cards ……………D-17
Wire Marker Dispenser …………D-17
Wire Pulling Lubricant
Selection Guide …………………B-8
Catalog Number Index
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
0012-00-0629 ……………F-3
351 ……………………A-58
23-007 …………………G-18
30-159 …………………A-3
30-3182 ………………A-14
0012-00-0642 ……………F-3
352 ……………………A-58
23-008 …………………G-18
30-161 …………………A-8
30-3183 ………………A-15
0012-00-0656 ……………F-3
358 ……………………A-58
23-027 …………………G-18
30-162 …………………A-8
30-3184 ………………A-15
0221 ……………………A-50
426 ……………………A-54
23-035S ………………G-18
30-163 …………………A-8
30-3194 ………………A-15
0222 ……………………A-50
427 ……………………A-54
23-036S ………………G-18
30-164Y …………………A-8
30-322 …………………A-28
0223 ……………………A-50
430 ……………………A-54
23-039S ………………G-18
30-165 …………………A-9
30-3280 ………………A-14
0230 ……………………A-50
444.001…………………D-25
23-041S ………………G-18
30-171 …………………A-2
30-3284 ………………A-15
0241 ……………………A-48
824 ……………………A-52
23-042S ………………G-18
30-172 …………………A-2
30-3287…………………A-15
0242 ……………………A-48
830 ……………………A-52
30-024 …………A-28, B-12
30-173 …………………A-2
30-3288 ………………A-15
0243 ……………………A-48
921 ……………………A-46
30-026 …………A-28, B-12
30-174……………………A-2
30-3289 ………………A-15
0250 ……………………A-48
924 ……………………A-46
30-030 …………A-28, B-12
30-176……………………A-2
30-3294 ………………A-15
0311 ……………………A-56
925 ……………………A-46
30-031 …………A-28, B-12
30-184 …………………A-12
30-330 …………………C-25
0312 ……………………A-56
930 ……………………A-46
30-032 …………A-28, B-12
30-185 …………………A-12
30-331 …………A-10, C-25
0318 ……………………A-56
1050 ……………………G-13
30-040 …………A-28, B-12
30-186 …………………A-12
30-332 …………………C-25
0330 ……………………A-58
1019-00-0343 ……………F-3
30-059 …………………A-3
30-187 …………………A-12
30-333 …………A-10, C-25
0351 ……………………A-58
1019-00-1105 ……………F-3
30-060 …………………A-8
30-188 …………………A-12
30-3370…………………A-13
0352 ……………………A-58
1019-00-1110 ……………F-3
30-061 …………………A-8
30-190 …………………A-12
30-3371 ………………A-13
0358 ……………………A-58
1019-00-1112 ………F-3, F-6
30-062 …………………A-8
30-192 …………………A-5
30-3380 …………A-13, A-14
0380 ……………………A-56
1019-00-1114 ……………F-3
30-063 …………………A-8
30-210 …………………A-28
30-3386 ………………A-14
0921 ……………………A-46
1019-00-1115 ……………F-3
30-064 …………………A-8
30-211 …………………A-28
30-3390 ………………A-15
0924 ……………………A-46
10-398 …………………C-39
30-065 …………………A-9
30-222 …………………A-28
30-3392 ………………A-15
0925 ……………………A-46
10-399 …………………C-39
30-071 …………………A-2
30-244J …………………A-7
30-3394 ………………A-15
0930 ……………………A-46
10-466 …………………C-39
30-072 …………………A-2
30-245 …………………A-27
30-3395 ………………A-15
11 ………………………A-62
11-111 …………………C-32
30-073 …………………A-2
30-249 …………………A-27
30-340 …………………A-6
12 ………………………A-62
11-113 …………………C-32
30-073J …………………A-2
30-251 …………………A-3
30-341 …………………A-6
13 ………………………A-63
11-115 …………………C-32
30-074……………………A-2
30-252 …………………A-3
30-341J …………………A-6
23 ………………………A-63
11-200 …………………C-32
30-074J …………………A-2
30-253 …………………A-3
30-342 …………………A-6
41 ………………………A-63
11-201 …………………C-32
30-076 …………………A-2
30-259 …………………A-3
30-3429 ………………C-19
42 ………………………A-63
1219-00-1604 ……………F-3
30-084 …………………A-12
30-260 …………………A-8
30-3430 ………………C-17
43 ………………………A-63
16-8-1/4 ………………A-39
30-084J…………………A-12
30-261 …………………A-8
30-3496 ………………A-15
60 ………………………A-62
16-8-10…………………A-39
30-085 …………………A-12
30-262 …………………A-8
30-352J…………………A-11
61 ………………………A-62
16-8-10L ………………A-39
30-085J…………………A-12
30-263 …………………A-8
30-360 …………………A-8
62 ………………………A-62
16-8-10S ………………A-39
30-086 …………………A-12
30-264 …………………A-8
30-360Y …………………A-8
63 ………………………A-62
170207L ………………G-12
30-086J…………………A-12
30-265 …………………A-9
30-362 …………………A-8
64 ………………………A-62
170208L ………………G-12
30-087 …………………A-12
30-271 …………………A-2
30-363 …………………A-8
67 ………………………A-62
170209L ………………G-12
30-087J…………………A-12
30-272 …………………A-2
30-364 …………………A-8
68 ………………………A-62
172451 …………………G-13
30-088 …………………A-12
30-273 …………………A-2
30-365 …………………A-9
70 ………………………A-63
2006S …………………A-39
30-088J…………………A-12
30-274……………………A-2
30-3680 ………………A-14
71 ………………………A-63
2006SB …………………A-39
30-090 …………………A-12
30-276 …………………A-2
30-372 …………………A-11
73 ………………………A-63
2007 ……………………A-39
30-090J…………………A-12
30-292 …………………A-5
30-382J…………………A-11
115 ……………………A-44
2007B …………………A-39
30-092 …………………A-5
30-3004 ………………A-16
30-3901 ………………A-16
120 ……………………A-44
2011S …………………A-39
30-092J …………………A-5
30-3006 ………………A-16
30-401 …………………A-27
125 ……………………A-44
2011SB …………………A-39
3010-12-0036 ……………F-3
30-3010 ………………A-16
30-402 …………………A-27
130 ……………………A-44
2014 ……………………A-39
3010-12-0092 ……………F-3
30-3012 ………………A-16
30-405 …………………A-27
221 ……………………A-50
2014B …………………A-39
30-102 …………………A-11
30-3014 ………………A-16
30-407 …………………A-27
222 ……………………A-50
2112-27-0604 ……………F-3
3010-70-0015 ……………F-3
30-310 …………………A-28
30-410 …………………A-27
223 ……………………A-50
2112-27-0605 ……………F-3
30-141 …………………A-6
30-311 …………………A-28
30-411 …………………A-27
230 ……………………A-50
23-001 …………………G-18
30-142 …………………A-6
30-3170…………………A-13
30-412 …………………A-27
241 ……………………A-48
23-002 …………………G-18
30-144J …………………A-7
30-3171 ………………A-13
30-415 …………………A-27
242 ……………………A-48
23-003 …………………G-18
30-148 …………………A-27
30-3172 ………………A-13
30-417 …………………A-27
243 ……………………A-48
23-004 …………………G-18
30-151 …………………A-3
30-3173 ………………A-13
30-420 …………………C-17
250 ……………………A-48
23-005 …………………G-18
30-152 …………………A-3
30-3180 …………A-13, A-14
30-425 …………………C-31
330 ……………………A-58
23-006 …………………G-18
30-153 …………………A-3
30-3181 ………………A-13
30-426 …………………F-11
Catalog Number Index
7
Index
Cat.
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Index
31-035………………B-3, B-4
31-207………………B-3, B-5
30-560 ……………F-13, F-19
30-793 ……F-15, F-18, F-19,
F-25
31-036 ………B-3, B-4, B-5
31-208 ……………B-3, B-5
30-565 …………………F-13
30-840 …………………A-6
31-038 ………B-3, B-4, B-5
31-2127 …………………B-3
30-570 …………………F-14
30-841 …………………A-6
31-050 …………………B-3
31-2128 …………………B-3
30-433F ……………C-6, F-13
30-572 ……………F-13, F-14
30-851 …………………A-4
31-051 …………………B-3
31-2138 …………………B-3
30-435 …………………C-17
30-573 ……………F-13, F-14
30-852 …………………A-4
31-052 …………………B-3
31-2139 …………………B-3
30-4419 ………………C-21
30-576 ……………F-13, F-14
30-871 …………………A-2
31-055………………B-3, B-4
31-2143…………………B-10
30-441J …………………A-6
30-577 ……………F-13, F-14
30-872 …………………A-2
31-056 ……………B-3, B-4
31-220 …………………B-5
30-4420 ………………C-21
30-578 ……………F-13, F-14
30-873 …………………A-2
31-057………………B-3, B-4
31-225 …………………B-4
30-4429 ………………C-23
30-579 ……………F-13, F-14
30-874……………………A-2
31-058 …………………B-3
31-276 …………………B-10
30-4430 ………………C-21
30-580 ……………F-13, F-14
30-876……………………A-2
31-059 …………………B-3
31-277 …………………B-10
30-4431 ………………C-23
30-581 ……F-13, F-14, F-20
30-885 …………………A-38
31-060 ……………B-3, B-4
31-278 …………………B-10
30-451 …………………A-4
30-582 ……………F-13, F-14
30-886 …………………A-38
31-061 ……………B-3, B-4
31-279 …………………B-10
30-451J …………………A-4
30-586 ……………F-13, F-14
30-887 …………………A-38
31-062 ……………B-3, B-4
31-282 …………………B-10
30-452 …………………A-4
30-587 ……………F-13, F-14
30-890 …………………A-38
31-063 ……………B-3, B-4
31-283 …………………B-10
30-452J …………………A-4
30-591 ……………F-13, F-14
30-891 …………………A-37
31-064 ……………B-3, B-5
31-291 …………………B-11
30-454 …………………A-4
30-593 …………………F-14
30-892 …………………A-37
31-065 ……………B-3, B-5
31-295 …………………B-11
30-478 …………………F-13
30-594 ……………F-13, F-14
30-893 …………………A-37
31-066 ……………B-3, B-4
31-298 …………………B-11
30-479 …………………F-13
30-596 …………………F-13
30-894 …………………A-37
31-067………………B-3, B-4
31-2980 …………………B-3
30-481 ……………F-13, F-14
30-597 …………………F-13
30-896 …………………A-37
31-073………………B-3, B-4
31-2982 …………………B-3
30-482 ……………F-13, F-14
30-599 …………………F-14
30-902 …………………A-10
31-074………………B-3, B-4
31-322 …………………B-16
30-483 ……F-13, F-14, F-25
30-903 …………………A-10
31-081 ……………B-3, B-5
31-323 …………………B-16
30-485 ……………F-13, F-14
30-603 ……F-15, F-18, F-21,
F-25
30-904 …………………A-10
31-085 ………B-3, B-4, B-6
31-324 …………………B-16
30-489 …………………F-13
30-610 …………………A-27
30-905 …………………A-10
31-090 ………B-3, B-4, B-5
31-325 …………………B-16
30-490 …………………F-13
30-615 …………………A-27
30-906 …………………A-10
31-091 ………B-3, B-4, B-5
31-326 …………………B-16
30-496 ……F-10, F-17, F-19,
F-20
30-633 ……F-15, F-17, F-18,
F-20, F-25
30-9429 ………………C-44
31-092 ………B-3, B-4, B-5
31-327 …………………B-16
30-9430 ………………C-44
31-093 ………B-3, B-4, B-5
31-330 …………………B-16
30-497 …………………F-10
30-640 …………………A-6
30-WGRB ………………A-38
31-094 ……………B-3, B-6
31-334 …………………B-16
30-498 …………………F-10
30-640J …………………A-6
30-WGRC ………………A-38
31-096 ……………B-3, B-5
31-335 …………………B-16
30-499 …………………F-10
30-641 …………………A-6
30-WGRJ ………………A-38
31-097………………B-3, B-5
31-3370 …………………B-3
30-500 ……………F-13, F-14
30-642 …………………A-6
30-WT1B ………………A-37
31-098 ……………B-3, B-5
31-3373…………………B-11
30-502 ……F-13, F-14, F-20
30-644J …………………A-7
30-WT1C ………………A-37
31-140 …………………B-3
31-3379 …………………B-3
30-503 ……F-13, F-14, F-21,
F-25
30-645 …………………A-27
30-WT2B ………………A-37
31-141 ……………B-3, B-4
31-338 …………………B-15
30-648 …………………A-27
30-WT2C ………………A-37
31-142 …………………B-3
31-3380 …………………B-3
30-506 ……F-13, F-19, F-20
30-649 …………………A-27
30-WT3B ………………A-37
31-144 ……………B-3, B-4
31-3384 …………………B-3
30-510 …………………A-27
30-651 …………………A-4
30-WT3C ………………A-37
31-146 ……………B-3, B-6
31-340 …………………B-15
30-511 …………………A-27
30-651J …………………A-4
30-WT41B ……………A-38
31-147………………B-3, B-6
31-343 …………………B-15
30-512 …………………A-27
30-652 …………………A-4
30-WT41C ……………A-38
31-148 ……………B-3, B-6
31-344 …………………B-15
30-515 …………………A-27
30-652J …………………A-4
30-WT41J ………………A-38
31-150 ………B-3, B-4, B-5
31-347 …………………B-15
30-517 …………………A-27
30-654 …………………A-4
30-WT4B ………………A-37
31-152…………B-3, B-4, B-5
31-349 …………………B-15
30-521 …………………F-13
30-673 …………………A-2
30-WT4C ………………A-37
31-155………………B-3, B-5
31-350 …………………B-9
30-522 ……………F-13, F-18
30-674……………………A-2
30-WT51B ……………A-38
31-156 …………………B-6
31-351 …………………B-9
30-525 …………………F-13
30-684 …………………A-12
30-WT51C ……………A-38
31-158 ……………B-3, B-6
31-355 …………………B-9
30-526 …………………F-13
30-685 …………………A-12
30-WT51J ………………A-38
31-159 ……………B-3, B-6
31-358 …………………B-9
30-541 …………………A-6
30-686 …………………A-12
30-WT52B ……………A-38
31-160 ………B-3, B-4, B-5
31-365 …………………B-9
30-5419 ………………C-21
30-687 …………………A-12
30-WT52C ……………A-38
31-162 ………B-3, B-4, B-5
31-371 …………………B-11
30-5420 ………………C-21
30-688 …………………A-12
30-WT52J ………………A-38
31-164 …………………B-6
31-375 …………………B-11
30-5429 ………………C-23
30-690 …………………A-12
30-WT54B ……………A-38
31-165………………B-3, B-5
31-376 …………………B-11
30-5430 ………………C-21
30-696 ……………F-10, F-21
30-WT54C ……………A-38
31-166 …………………B-6
31-377 …………………B-11
30-5431 ………………C-23
30-703 ……………F-15, F-25
30-WT6B ………………A-37
31-170……………………B-6
31-378 …………………B-11
30-551 …………………A-4
30-720 ……………F-15, F-25
30-WT6C ………………A-37
31-186 ……………B-3, B-5
31-381 …………………B-10
30-552 …………………A-4
30-760 …………………A-8
31-010 ……………B-3, B-5
31-187………………B-3, B-5
31-385 …………………B-10
30-556 ……F-13, F-19, F-20
30-764 …………………A-8
31-012 ……………B-3, B-5
31-189 ……………B-3, B-5
31-3855 ………………B-11
30-558 ……………F-13, F-19
30-765 …………………A-9
31-033 …………………B-3
31-190 ……………B-3, B-5
31-388 …………………B-10
30-428 ……………C-6, C-27
30-559 ……F-13, F-19, F-20
30-429 …………………C-19
30-430 …………………C-17
30-433 ……………C-6, F-13
8
Catalog Number Index
Catalog Number Index
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
31-389 …………………B-10
33-320 ……F-12, F-16, F-19
35-012 …………………C-17
35-154 …………………C-27
35-300 …………………C-33
31-391 …………………B-9
33-400 …………………F-21
35-013 …………………C-17
35-156 …………………C-27
35-301 …………………C-33
31-395 …………………B-9
33-505 …………………F-21
35-020 …………………C-32
35-158 …………………C-27
35-3012…………………C-17
31-398 …………………B-9
33-605 …………………F-20
35-021 …………………C-32
35-161 …………………C-27
35-3028 ………………C-18
31-400 …………………B-3
33-620 …………………F-18
35-026 …………………C-18
35-164 …………………C-27
35-3029 ………………C-18
31-417 …………………B-12
33-621 …………………F-18
35-027 …………………C-18
35-166 …………………C-27
35-3037 …………C-18, F-21
31-421 …………………B-11
33-623 …………………F-20
35-028 …………………C-18
35-168 …………………C-27
35-3038 ………………C-18
31-425 …………………B-11
33-625 …………………F-18
35-029 …………………C-18
35-173 …………………C-27
35-3052 ………………C-19
31-435 …………………B-11
33-630 …………………F-19
35-031 …………………C-30
35-176 …………………C-27
35-311 …………………C-38
31-466 …………………B-16
33-651 …………………F-19
35-031B ………………C-30
35-178 …………………C-27
35-316 …………………C-39
31-467 …………………B-16
33-652 …………………F-19
35-032 …………………C-30
35-180 …………………C-27
35-325 …………………C-38
31-468 …………………B-16
33-653 …………………F-15
35-032B ………………C-30
35-183 …………………C-27
35-338 …………………C-39
31-469 …………………B-16
33-700 …………………F-10
35-033 …………………C-30
35-184 …………………C-27
35-339 …………………C-39
31-470 …………………B-16
33-704 …………………F-19
35-033B ………………C-30
35-185 …………………F-10
35-340 …………………C-47
31-471 …………………B-16
33-705 …………………F-20
35-036 …………………C-18
35-186 …………………C-27
35-341 …………………C-47
31-472 …………………B-16
33-750 …………………F-19
35-037 …………………C-18
35-188 …………………C-27
35-342 …………………C-47
31-473 …………………B-16
33-825 ……………………F-7
35-038 …………………C-18
35-190 …………………C-27
35-3420 ………………C-19
31-475 …………………B-16
33-826 ……………………F-7
35-039 …………………C-18
35-191 …………………C-28
35-343 …………………C-47
31-476 …………………B-16
33-835 ……………………F-7
35-041 …………………F-22
35-193 …………………C-28
35-3430 …………C-19, F-21
31-477 …………………B-16
33-836 ……………………F-7
35-042 …………………F-22
35-194 …………………C-28
35-343CG ………………C-49
31-479 …………………B-16
33-852 ……………………F-9
35-043 …………………F-22
35-195 …………………C-28
35-344 …………………C-47
31-480 …………………B-16
33-854 ……………………F-9
35-046………F-17, F-18, F-21
35-196 …………………C-28
35-345 …………………C-47
31-481 …………………B-16
33-856 ………F-8, F-18, F-25
35-051 …………………F-11
35-200 …………………C-28
35-345CG ………………C-49
31-542 …………………B-4
33-861 …………………F-20
35-052 …………………C-19
35-202 …………………C-28
35-346 …………………C-47
31-544 …………………B-4
33-862……………………F-9
35-053 …………………C-30
35-203 …………………C-28
35-347 …………………C-47
31-552 …………………B-4
33-864……………………F-9
35-054 …………………C-30
35-205 ……………C-33, F-21
35-348 …………………C-47
31-554 …………………B-4
33-869 …………………F-20
35-055 …………………C-30
35-207 …………………C-33
35-349 …………………C-47
31-601 …………………B-12
33-880 ……………F-7, F-25
35-056 …………………C-30
35-210 ……………C-32, F-21
35-349CG ………………C-49
31-605 …………………B-12
33-881 ……………F-7, F-25
35-057 …………………C-30
35-238 ……………C-33, F-21
35-350 …………………C-47
31-611 …………………B-7
33-886……………………F-7
35-060 ……………F-11, F-20
35-242 …………………C-33
35-351 …………………C-47
31-612 …………………B-7
33-887 ……………F-7, F-25
35-061 …………………F-21
35-259 …………………C-56
35-352 …………………C-47
31-631 …………………B-7
33-891……………………F-8
35-075……………B-12, C-25
35-260 …………B-14, C-56
35-353 …………………C-47
31-633 …………………B-7
33-915 …………………F-17
35-078 …………………C-30
35-261 …………B-14, C-56
35-353CG ………………C-49
31-643 …………………B-7
33-916 …………………F-18
35-083 …………B-12, C-25
35-262 …………B-14, C-56
35-354 …………………C-47
31-644 …………………B-7
33-917 …………………F-18
35-085 …………………C-30
35-263 …………B-14, C-56
35-355 …………………C-47
31-647……………………B-7
33-935 …………………F-21
35-087 ……………F-11, F-21
35-264 …………B-14, C-56
35-355CG ………………C-49
31-648 …………………B-7
33-945 …………………F-21
35-271 …………B-14, C-56
35-356 …………………C-47
31-651 …………………B-7
33-974 ……………………F-6
35-088 ……F-11, F-18, F-20,
F-21
35-272……………B-14, C-56
35-357 …………………C-47
31-652 …………………B-7
33-981……………………F-6
35-089 …………………F-11
35-273……………B-14, C-56
35-358 …………………C-47
31-839 …………………B-15
33-982 ……………………F-6
35-090 …………………F-11
35-274 …………………C-56
35-359 …………………C-47
31-840 …………………B-15
33-983 ……………………F-6
35-091 ……………F-11, F-21
35-275 ……………C-56, F-21
35-359CG ………………C-49
31-841 …………………B-15
33-987 ……………………F-6
35-092 …………………F-11
35-285 …………………C-33
35-360 …………………C-47
31-844 …………………B-15
34-001 …………………C-45
35-093 …………………F-11
35-286 …………………C-33
35-361 …………………C-47
31-845 …………………B-15
34-002 …………………C-45
35-094 …………………F-11
35-287 …………………C-33
35-362 …………………C-47
31-846 …………………B-15
34-003 …………………C-45
35-096 …………B-12, C-25
35-290 …………………C-29
35-362CG ………………C-49
31-849 …………………B-15
34-012 …………………C-45
35-097……………B-12, C-25
35-291 …………………C-29
35-363 …………………C-47
31-850 …………………B-15
34-015 …………………C-45
35-098 …………B-12, C-25
35-292 …………A-10, C-29
35-364 …………………C-47
31-851 …………………B-15
34-016 …………………C-45
35-145 …………………C-33
35-293 …………………C-29
35-364CG ………………C-49
31-853 …………………B-15
35-001 …………………C-56
35-146 …………………C-33
35-294 …………………C-29
35-365 …………………C-47
31-854 …………………B-15
35-002 …………………C-56
35-147 …………………C-33
35-295 …………A-10, C-29
35-365CG ………………C-49
31-855 …………………B-15
35-003 …………………C-56
35-150 …………………C-27
35-296 …………………C-29
35-366 …………………C-47
31-856 …………………B-15
35-006 …………………C-23
35-151 …………………C-27
35-297 …………………C-26
35-367 …………………C-47
31-857 …………………B-15
35-007 …………………C-23
35-152 …………………C-27
35-298 …………………C-26
35-368 …………………C-47
33-296 …………………F-10
35-008 …………………C-23
35-153 …………………C-27
35-299 …………………C-29
35-368CG ………………C-49
Catalog Number Index
9
Index
Cat.
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Index
35-369 …………………C-47
35-418 …………………C-41
35-537 …………………C-48
35-866 …………………C-52
35-9353 ………………C-44
35-370 …………………C-47
35-419 …………………F-20
35-538 …………………C-48
35-868 …………………C-52
35-940 …………………C-29
35-370CG ………………C-49
35-420 ……………C-19, F-21
35-5430 ………………C-22
35-870 …………………C-52
35-9406 ………………C-45
35-371 …………………C-47
35-421 …………………C-32
35-5792…………………C-37
35-871 …………………C-52
35-941 …………………C-29
35-372 …………………C-47
35-422 …………………C-32
35-5793…………………C-37
35-872 …………………C-52
35-942 …………………C-29
35-373 …………………C-47
35-423 …………………C-32
35-5800 ………………C-36
35-892 …………………C-52
35-943 …………………C-29
35-373CG ………………C-49
35-426 …………………C-19
35-5805 ………………C-36
35-893 …………………C-52
35-9430 ………………C-44
35-374 …………………C-47
35-427 ……………C-41, F-21
35-5808 ………………C-37
35-896 …………………C-52
35-950 …………………C-38
35-375 …………………C-47
35-430 ……………C-19, F-21
35-598 …………………C-49
35-897 …………………C-52
35-950BLK ……………C-38
35-375CG ………………C-49
35-431 …………………C-41
35-599 …………………C-49
35-898 …………………C-52
35-956 …………………C-39
35-376 …………………C-47
35-440 …………………C-19
35-601CG ………………C-49
35-899 …………………C-52
35-956BLK ……………C-39
35-377 …………………C-47
35-441 …………………C-41
35-602CG ………………C-49
35-9029 ………………C-44
35-958 …………………C-39
35-378 …………………C-47
35-4430 ………………C-22
35-603CG ………………C-49
35-903 …………………C-39
35-958BLK ……………C-39
35-378CG ………………C-49
35-462 ……C-41, F-18, F-20
35-655 …………………C-40
35-9038 ………………C-44
35-964 …………………C-39
35-379 …………………C-47
35-463 …………………C-41
35-665 …………………C-40
35-905 ……C-29, F-20, F-21
35-965 …………………C-39
35-380 …………………C-47
35-465 …………………F-17
35-690 …………………C-28
35-9052 ………………C-44
35-965BLK ……………C-39
35-381 …………………C-47
35-466 …………………F-17
35-691 …………………C-28
35-969 …………………C-38
35-382 …………………C-47
35-468 …………………F-17
35-692 …………………C-28
35-908 ……A-10, C-24, F-18,
F-21
35-383 …………………C-47
35-473 ……F-18, F-20, F-21
35-693 …………………C-28
35-909 …………………C-24
35-971 …………………C-52
35-384 …………………C-47
35-474 …………………C-40
35-694 …………………C-28
35-910 …………………C-29
35-972 …………………C-52
35-384CG ………………C-49
35-478 …………………F-10
35-695 …………………C-28
35-911 …………………C-24
35-975 …………………C-38
35-385 …………………C-47
35-479 …………………F-10
35-696 …………………C-28
35-912 …………………C-24
35-975BLK ……………C-38
35-386 …………………C-47
35-4790…………………C-36
35-780 ……………C-7, C-31
35-913 …………………C-24
35-976 …………………C-52
35-387 …………………C-47
35-483 …………………F-10
35-781 ……………C-7, C-31
35-914 …………………C-24
35-977 …………………C-52
35-388 …………………C-47
35-782 ……………C-7, C-31
35-915 …………………C-24
35-978 …………………C-52
35-389 …………………C-47
35-485 ……F-10, F-18, F-20,
F-21
35-784BLK ……………C-39
35-922 …………C-25, C-32
35-979 …………………C-52
35-390 …………………C-47
35-487 ……………F-10, F-20
35-790 …………………C-34
35-923 …………C-25, C-32
35-988 …………………C-24
35-391 …………………C-48
35-491 …………………F-10
35-794 …………………C-35
35-926 …………………C-25
35-9905 ………………C-45
35-392 …………………C-48
35-492 ……………F-10, F-17
35-800 …………………C-34
35-927 …………………C-25
35-995 …………………C-39
35-393 …………………C-48
35-493 …………………F-10
35-805 …………………C-35
35-9300 ………………C-43
35-995BLK ……………C-39
35-394 …………………C-48
35-495 ……………F-10, F-20
35-808 …………………C-35
35-9301 ………………C-43
36-043 …………………C-51
35-396 …………………C-48
35-497 ……F-10, F-20, F-21
35-809 …………………C-34
35-9302 ………………C-43
36-044 …………………C-51
35-397 …………………C-48
35-5012 ………………C-21
35-810 …………………C-52
35-9303 ………………C-44
36-046 …………………C-51
35-398 …………………C-48
35-5026 ………………C-21
35-811 …………………C-52
35-9304 ………………C-44
36-048 …………………C-51
35-400 …………………C-48
35-5028 ………………C-21
35-812 …………………C-52
35-9310 ………………C-44
36-052 …………………C-51
35-401 …………………C-48
35-5029 ………………C-21
35-813 …………………C-52
35-9311 ………………C-44
36-054 …………………C-50
35-4012 ………………C-21
35-5035 ………………C-22
35-814 …………………C-52
35-9312 ………………C-44
36-055 …………………C-50
35-402……………C-40, F-18
35-5036 ………………C-22
35-815 …………………C-52
35-9320 ………………C-44
36-056 …………………C-51
35-4026 ………………C-21
35-5038 ………………C-22
35-816 …………………C-52
35-9321 ………………C-44
36-057 …………………C-50
35-4028 ………………C-21
35-505 …………………C-40
35-817 …………………C-52
35-9322 ………………C-44
36-057B ………………C-50
35-4029 ………………C-21
35-5052 ………………C-23
35-818 …………………C-52
35-9323 ………………C-44
36-058 …………………C-50
35-403 …………………C-40
35-511 …………………C-53
35-819 …………………C-52
35-9324 ………………C-44
36-058B ………………C-50
35-4035 ………………C-22
35-512 …………………C-53
35-820 …………………C-52
35-9325 ………………C-44
36-059 …………………C-50
35-4036 ………………C-22
35-513 …………………C-53
35-821 …………………C-52
35-9330 ………………C-44
36-059B ………………C-50
35-4038 ………………C-22
35-514 …………………C-53
35-822 …………………C-52
35-9331 ………………C-44
36-060 …………………C-50
35-404 …………………C-28
35-515 …………………C-53
35-823 …………………C-52
35-9332 ………………C-44
36-065 …………………C-50
35-405 …………………C-40
35-516 …………………C-53
35-824 …………………C-52
35-9333 ………………C-44
36-065B ………………C-50
35-4052 ………………C-23
35-517 …………………C-53
35-825 …………………C-52
35-9334 ………………C-44
36-066 …………………C-50
35-406 …………………C-28
35-518 …………………C-48
35-826 …………………C-52
35-9335 ………………C-44
36-067 …………………C-50
35-407 ……F-10, F-18, F-21
35-520 …………………C-53
35-827 …………………C-52
35-9336 ………………C-44
36-070 …………………C-51
35-408 …………………C-28
35-533 …………………C-41
35-828 …………………C-52
35-9340 ………………C-44
36-071 …………………C-51
35-410……………C-41, F-18
35-534 …………………C-41
35-829 …………………C-52
35-9350 ………………C-44
36-072 …………………C-51
35-411 …………………C-32
35-535 ……C-41, F-17, F-18
35-862 …………………C-52
35-9351 ………………C-44
36-073 …………………C-51
35-412 …………………C-32
35-536 …………………C-48
35-864 …………………C-52
35-9352 ………………C-44
36-075 …………………C-50
10
Catalog Number Index
35-969BLK ……………C-38
Catalog Number Index
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
44-109 …………………D-16
44-805 …………………D-21
44-906 …………D-19, D-39
45-121 ……………C-2, C-4
36-085 …………………C-50
44-110 …………………D-16
44-806 …………………D-21
44-907 …………D-20. D-39
45-123 ……………C-2, C-4
36-086 …………………C-50
44-111 …………………D-16
44-908 …………………D-39
45-124 ……………C-2, C-4
36-087 …………………C-50
44-148 …………………D-16
44-807……D-19, D-20, D-21,
D-22, D-23
44-909 …………………D-39
45-125 ……………C-2, C-4
36-088 …………C-50, C-56
44-151 …………………D-16
44-808 …………………D-38
44-910 …………………D-39
45-125-341………………C-4
36-090 …………………C-50
44-152 …………………D-16
44-911 …………………D-39
45-144 …………………F-13
36-095 …………………C-50
44-154 …………………D-16
44-809……D-19, D-20, D-21,
D-22, D-24
44-912 …………………D-39
45-162 ……………F-12, F-27
36-096 …………………C-50
44-1791 ………………D-40
44-914 …………………D-39
45-163 ……………F-12, F-27
36-240 …………………C-29
44-1800 ………………D-40
44-810……D-19, D-20, D-21,
D-22, D-24
45-164 ……………F-12, F-25
36-241 …………………C-29
44-1807 ………………D-23
44-916……D-19, D-21, D-22,
D-39
36-242 …………………C-29
44-1809 ………………D-24
36-243 …………………C-29
44-1810 ………………D-24
36-244 …………………C-29
36-245 …………………C-29
36-246 …………………C-29
36-248 …………………C-29
44-1830 ………………D-40
44-1833 ………………D-40
44-289 …………………D-17
44-292 …………………D-17
44-815 …………D-21, D-37
44-918 …………………D-39
45-165 ……F-12, F-18, F-20,
F-21
44-920 …………………D-39
45-167 ……………F-12, F-17
44-921 …………………D-39
45-169 ……………C-8, C-9
44-922 …………………D-39
45-170………………C-8, C-9
44-923 …………………D-39
45-171………………C-8, C-9
44-940 …………………D-22
45-172………………C-8, C-9
44-941 …………………D-22
45-173………………C-8, C-9
44-942 …………………D-22
45-174………………C-8, C-9
44-953 …………………D-22
45-175………………C-8, C-9
44-954 …………………D-22
45-176………………C-8, C-9
44-969 …………………D-19
45-177………………C-8, C-9
44-970 …………………D-19
45-178………………C-8, C-9
44-971 …………………D-20
45-179………………C-8, C-9
44-972 …………………D-0
45-215 …………………C-4
44-973 …………………D-19
45-216 …………………C-4
44-974 …………………D-21
45-217……………………C-4
44-834 …………………D-40
44-975 …………………D-22
45-218 …………………C-4
44-841 …………………D-40
44-980 …………………D-1
45-223 …………………C-4
44-843 …………………D-40
44-990 …………………D-41
45-227……………………C-7
44-844 …………………D-40
44-991 …………………D-41
45-235 …………………C-7
44-846 …………………D-38
44-992 …………………D-41
45-247……………………C-5
44-847 …………………D-38
44-993 …………………D-41
45-248 …………………C-5
44-848 …………………D-40
44-994 …………………D-41
45-249 …………………C-5
44-849 …………D-21, D-40
45-025 …………………C-7
45-074 ………C-6, F-11, F-17,
F-18, F-19, F-20,
F-21, F-25
45-262 ……C-13, F-12, F-18,
F-19
44-816 …………………D-21
44-817 …………………D-38
44-818……D-19, D-20, D-21,
D-22, D-37
44-819 ……D-21, D-22, D-37
44-820 ……D-21, D-22, D-38
44-821 …………………D-38
36-249 …………………C-29
44-295 …………………D-17
44-822 …………………D-23
38-500 …………B-12, C-32
44-296 …………………D-17
44-823 …………………D-23
4010-00-0136 ……………F-6
44-298 …………………D-17
41-697 …………………D-17
44-299 …………………D-17
41-698 …………………D-17
44-314 …………………D-17
41-990 …………………D-9
44-353 …………………D-17
41-995 …………………D-9
44-355 …………………D-17
42-001 …………………D-18
44-358 …………………D-17
42-002 …………………D-18
44-364 …………………D-17
42-003 …………………D-18
44-410 …………………D-17
42-011 …………………D-18
44-697 …………………D-39
42-012 …………………D-18
44-698 …………………D-39
42-015 …………………D-18
44-753 …………………D-17
42-031 …………………D-18
42-051 …………………D-18
42-052 …………………D-18
42-101 …………………D-18
42-102 …………………D-18
44-764 …………………D-25
44-768 …………………D-25
44-769 …………………D-25
44-772 …………………D-37
44-774 …………………D-22
44-824 ……D-21, D-22, D-38
44-825 …………D-22, D-38
44-829 …………………D-38
44-830 …………D-20, D-40
44-831 …………………D-40
44-832 …………………D-40
44-833……D-19, D-20, D-22,
D-40
42-103 …………………D-18
44-777 …………………D-21
44-862 …………………D-42
42-104 …………………D-18
44-778 …………………D-21
44-863 …………………D-42
42-131 …………………D-18
44-779 …………………D-24
44-865 …………………D-42
42-151 …………………D-18
44-780 …………………D-24
44-877 …………………D-42
42-152 …………………D-18
44-782 …………………D-37
44-878 …………………D-42
42-201 …………………D-18
44-880 …………………D-42
42-251 …………………D-18
44-783……D-19, D-20, D-21,
D-22, D-23
42-252 …………………D-18
44-784 …………………D-24
42-301 …………………D-17
44-785……D-20, D-21, D-22,
D-24
42-399 …………………D-17
43-953 …………………D-17
43-960 …………………D-17
44-101 …………………D-16
44-786……D-20, D-21, D-22,
D-23
44-787 …………………D-24
44-881 …………………D-42
44-890 …………………D-42
44-892 …………………D-42
44-893 …………………D-42
44-894 …………………D-42
44-895 …………………D-42
44-896 …………………D-42
44-102 …………………D-16
44-789……D-19, D-20, D-21,
D-22, D-37
44-103 …………………D-16
44-790 …………………D-40
44-900 …………………D-39
44-104 …………………D-16
44-791 …………D-21, D-40
44-901 …………………D-39
44-105 …………………D-16
44-902 …………………D-39
44-106 …………………D-16
44-800……D-19, D-20, D-21,
D-22, D-40
44-107 …………………D-16
44-801 …………………D-40
44-904 …………………D-39
44-108 …………………D-16
44-804 …………………D-20
44-905 …………………D-39
44-898 …………………D-39
44-903 …………………D-39
45-264 …………………C-13
45-265 ……C-13, F-12, F-25
45-075 ………C-6, F-11, F-25
45-266 …………………C-13
45-089 …………………C-13
45-282 ……………C-13, F-12
45-090 …………C-13, C-14
45-290 …………C-13, C-14
45-090-341 ……………C-14
45-290-341 ……………C-14
45-091 …………C-13, C-14
45-292 …………………C-13
45-092 …………C-13, C-14
45-292-241 ……………C-14
45-092-341 ……………C-14
45-298-341 ……………C-14
45-093 …………C-13, C-14
45-310-341………………C-4
45-095 …………………C-13
45-315 ……………C-2, C-4
45-097……………C-13, C-14
45-315-341………………C-4
45-098 …………C-13, C-14
45-316 ……………C-2, C-5
45-098-341 ……………C-14
45-317………………C-2, C-5
45-099 …………C-13, C-14
45-317-341 ………………C-4
45-101 …………………C-5
45-318 ……………C-2, C-4
45-118 …………………C-7
45-120 ……………C-2, C-4
45-320 ……F-12, F-17, F-18,
F-19, F-20, F-25
45-120-341………………C-4
45-323 ……………C-2, C-4
Catalog Number Index
11
Index
Cat.
36-076 …………………C-51
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Index
45-332 …………………F-28
45-671-341 ……………C-14
46-354 …………………D-14
61-076 ……………E-27, E-32
45-334 …………………F-28
45-672……………C-13, C-14
46-356 …………………D-14
61-085 ……………E-27, E-32
61-565 ……E-3, E-4, E-5, E-6,
E-17
45-335 …………………F-28
45-673……………C-13, C-14
46-357 …………………D-14
61-086 ……………E-27, E-32
61-602 …………………E-32
45-336 …………………F-28
45-674……………C-13, C-14
46-358 …………………D-14
61-090 ……………E-26, E-32
61-603 …………………E-32
45-337 …………………F-27
45-675……………C-13, C-14
46-369 …………………D-14
61-092 ……………E-26, E-32
61-605 ………E-2, E-7, E-34
45-338 …………………F-27
45-714 …………………C-2
46-371 …………………D-14
61-096 …………………E-28
61-609 …………………E-32
45-339 …………………F-27
45-715 ……………C-2, C-3
46-372 …………………D-14
61-164 ……………E-23, E-32
61-610 …E-2, E-8, E-32, E-34
45-341 …………………F-27
45-716 ……………C-2, C-3
46-381 …………………D-14
61-165 ……………E-23, E-32
61-614 …E-2, E-8, E-32, E-34
45-342 …………………F-27
45-718 ……………C-2, C-3
46-382 …………………D-14
61-175 …………………E-23
61-633 …………………E-32
45-344 …………………F-26
45-719 …………………F-24
46-383 …………………D-14
61-176 …………………E-23
61-635 …………………E-32
45-349 …………………F-26
45-777……………………C-6
46-384 …………………D-14
61-177 ……………E-22, E-25
61-681 ……………E-30, E-32
45-350 …………………F-26
45-778……………………C-6
46-387 …………………D-14
61-179 ……………E-22, E-23
61-682 ……………E-30, E-32
45-352 …………………F-26
45-890 …………………C-11
46-400 …………………D-12
61-182 …………………E-23
61-701…E-9, E-10, E-32, E-34
45-357 …………………F-27
45-891 …………………C-11
46-401 …………………D-12
61-183 …………………E-23
61-702…E-9, E-10, E-32, E-34
45-358 …………………F-27
45-892 …………………C-11
46-402 …………………D-12
61-184 …………………E-25
61-704…E-9, E-10, E-32, E-34
45-359 …………………F-27
45-893 …………………C-11
46-403 …………………D-12
61-2000…………………E-15
61-710 ………E-9, E-14, E-34
45-360 …………………F-27
45-894 …………………C-11
46-404 …………………D-12
61-2001…………………E-15
61-732…E-9, E-11, E-32, E-34
45-372-341 ……………C-14
45-895 …………………C-11
46-405 …………………D-12
61-2002…………………E-15
61-736…E-9, E-11, E-32, E-34
45-415 ……………C-2, C-3
45-9120 ………………C-44
46-410 …………………D-12
61-2003…………………E-22
61-764…E-9, E-12, E-32, E-34
45-416 ……………C-2, C-3
45-915 ……………C-2, C-3
46-411 …………………D-12
61-2004…………………E-22
61-766…E-9, E-12, E-32, E-34
45-417………………C-2, C-3
45-918 ……………C-2, C-3
46-420 …………………D-12
61-310 ………E-2, E-7, E-34
61-768…E-9, E-12, E-32, E-34
45-418 ……………C-2, C-3
45-9615 ………………C-44
46-600 …………………D-13
61-312 ………E-2, E-7, E-34
61-772…E-9, E-13, E-32, E-34
45-423 ………C-2, C-3, C-4
46-007 …………………D-15
46-601 …………………D-13
61-314 ………E-2, E-7, E-34
61-774 …E-9, E-13, E-32, E-34
45-425-341………………C-3
46-202 …………………D-15
46-602 …………………D-13
61-320 …E-2, E-3, E-32, E-34
61-788 …………………E-18
45-448 …………………C-3
46-203 …………………D-15
46-603 …………………D-13
61-322 …E-2, E-3, E-32, E-34
61-789 …………………E-18
45-449 …………………C-3
46-204 …………………D-15
46-604 …………………D-13
61-324 …E-2, E-3, E-32, E-34
61-791 …………………E-19
45-510 ……………F-12, F-25
46-310 …………………D-13
46-605 …………………D-13
61-330 …………………E-31
61-792 …………………E-19
45-513 …………………F-12
46-311 …………………D-13
46-606 …………………D-13
61-331 …………………E-31
61-798 …………………E-18
45-514 …………………F-12
46-312 …………………D-13
46-607 …………………D-13
61-332 …………………E-31
61-805 ……………E-20, E-21
45-520 ……………F-12, F-20
46-313 …………………D-13
46-608 …………………D-13
61-333 …………………E-31
61-806 ……………E-20, E-21
45-521 …………………F-12
46-314 …………………D-13
46-609 …………………D-13
61-334 …………………E-31
61-807 ……………E-20, E-21
45-522 …………………F-12
46-315 …………………D-13
46-610 …………………D-13
61-350 …E-2, E-5, E-32, E-34
61-810 …………………E-21
45-523 …………………F-12
46-316 …………………D-13
46-941 …………………D-15
61-352 …E-2, E-5, E-32, E-34
61-811 …………………E-21
45-524 …………………F-12
46-317 …………………D-13
46-950 …………………D-15
61-354 …E-2, E-5, E-32, E-34
61-812 …………………E-21
45-526 ……F-12, F-18, F-21
46-318 …………………D-13
46-951 …………………D-15
61-360 …E-2, E-6, E-32, E-34
61-813 …………………E-21
45-529 ……………F-17, F-25
46-319 …………………D-13
46-952 …………………D-15
61-361 …E-2, E-6, E-32, E-34
61-814 …………………E-21
45-603 ……………F-12, F-25
46-320 …………………D-13
46-953 …………………D-15
61-436 …………………E-31
61-819 …………………E-21
45-615 ……………C-2, C-3
46-321 …………………D-13
46-954 …………………D-15
61-445 …………………E-32
61-820 …………………E-21
45-616 ……………C-2, C-3
46-322 …………………D-13
46-955 …………………D-15
61-447 …………………E-32
61-821 …………………E-21
45-617………………C-2, C-3
46-323 …………………D-13
46-956 …………………D-15
61-451 ……………E-5, E-31
61-830 …………………E-22
45-618 ……………C-2, C-3
46-324 …………………D-13
6011-50-0031 ……………F-3
61-452 E-9, E-14, E-32, E-34
61-900……………………E-4
45-621 ……………C-3, C-5
46-325 …………………D-13
60B36 …………………A-62
61-457 …………………E-21
61-902……………………E-4
45-631 ……………C-9, C-10
46-326 …………………D-13
61-010 ……………E-27, E-32
61-461 ……………E-4, E-33
61-904……………………E-3
45-632 ……………C-9, C-10
46-328
……………D-13
61-020 …………………E-32
61-465 ……………E-4, E-33
61-905……………………E-3
45-633 ……………C-9, C-10
46-329 …………………D-13
61-025 …………………E-29
61-494 …E-2, E-4, E-32, E-34
61-920 …………………E-18
45-634 ……………C-9, C-10
46-330 …………………D-13
61-030 …………………E-29
61-495 …E-2, E-4, E-32, E-34
61-954 ……E-16, E-17, E-32
45-635 ……………C-9, C-10
46-343 …………………D-14
61-035 …………………E-25
61-500 …………………E-25
61-956 ……E-16, E-17, E-32
45-636 ……………C-9, C-10
46-344 …………………D-14
61-040 …………………E-29
61-501 …………………E-25
61-958 ……E-16, E-17, E-32
45-637 ……………C-9, C-10
46-346 …………………D-14
61-051 …………………E-25
61-503 …………………E-29
62-096 …………………F-10
45-638 ……………C-9, C-10
46-347 …………………D-14
61-058 ……………E-25, E-32
61-520 …………………E-30
62-098 …………………F-10
45-639 ……………C-9, C-10
46-348 …………………D-14
61-063 …………………E-29
61-521 …………………E-30
62-140 ……………F-9, F-18
45-640 ……………C-9, C-10
46-350 …………………D-14
61-065 ……………E-27, E-32
61-532 …………………E-24
62-160 ………F-9, F-20, F-21
45-641 ……………C-9, C-10
46-351 …………………D-14
61-070 …………………E-27
61-534 …………………E-24
62-164…F-9, F-18, F-20, F-21
45-671 …………C-13, C-14
46-352 …………………D-14
61-072 …………………E-27
61-561 …………………E-31
62-180 ……………F-9, F-20
12
Catalog Number Index
Catalog Number Index
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
772806 …………………D-11
774054 …………………G-6
774138 …………………G-15
777231 …………………G-12
62-188……………………F-9
772807 …………………D-11
774055 …………………G-6
774002BK ………………G-4
777311 …………………G-11
62-200 ……………F-10, F-20
772808 …………………D-11
774056 …………………G-6
774003BK ………………G-3
777321 …………………G-11
62-205 …………………F-21
772809 …………………D-11
774059 …………………G-7
774005BK ………………G-2
777331 …………………G-12
62-891……………………F-8
772810 …………………D-11
774060 …………………G-7
774008BK ………………G-2
777411 …………………G-11
6510-00-5000 ……………F-3
772812 …………………D-11
774061 …………………G-10
774011BK ………………G-2
777511 …………………G-11
74-001 …………………B-13
772840 …………………D-11
774062 …………………G-10
774014BK ………………G-2
778111 …………………G-11
74-002 …………………B-13
772841 …………………D-11
774063 …………………G-10
774015BK ………………G-3
778211 …………………G-11
74-003 …………………B-13
772880 …………………D-11
774069 …………………G-10
774017BK ………………G-4
80-012 …………………G-17
74-006 …………………B-13
774000 …………………G-3
774071 …………………G-9
774020BK ………………G-5
80-033 …………………G-18
74-010 …………………B-14
774001 …………………G-4
774072 …………………G-9
774026K ………………G-10
80-075 …………………G-17
74-011 …………………B-14
774002 …………………G-4
774073 …………………G-9
774026KBK ……………G-10
80-255 …………………G-17
74-012 …………………B-14
774003 …………………G-3
774074 …………………G-9
774028BK ………………G-3
80-265 …………………G-17
74-013 …………………B-14
774004 …………………G-5
774080 …………………G-8
774040BK ………………G-6
80-454 …………………G-17
74-019……………B-13, B-14
774005 …………………G-2
774081 …………………G-8
774049BK ………………G-7
80-461 …………………G-17
74-020……………B-13, B-14
774006 …………………G-5
774082 …………………G-8
774054BK ………………G-6
80-475 …………………G-17
74-021……………B-13, B-14
774007 …………………G-4
774083 …………………G-8
774059BK ………………G-7
80-504 …………………G-17
74-026 …………………B-13
774008 …………………G-2
774084 …………………G-8
774060BK ………………G-7
82-001 …………………G-18
74-027 …………………B-13
774009 …………………G-2
774085 …………………G-8
774063B ………………G-10
82-002 …………………G-18
74-028 …………………B-13
774010 …………………G-2
774086 …………………G-8
774063BK ………………G-10
82-003 …………………G-18
74-031 …………………B-13
774011 …………………G-2
774087 …………………G-5
774071BK ………………G-9
82-004 …………………G-18
74-032 …………………B-13
774012 …………………G-2
774088 …………………G-2
774072BK ………………G-9
82-005 …………………G-18
74-033 …………………B-13
774013 …………………G-2
774089 …………………G-3
774074BK ………………G-9
82-006 …………………G-18
74-034 …………………B-13
774014 …………………G-2
774091 …………………G-3
774085BK ………………G-8
83-001 …………………C-31
74-035 …………………B-13
774015 …………………G-3
774092 …………………G-3
774087BK ………………G-5
83-005 …………………C-31
74-036 …………………B-13
774016 …………………G-3
774093 …………………G-2
774088BK ………………G-2
83-0131 ………………A-17
74-046 …………………B-13
774017 …………………G-4
774094 …………………G-2
774089BK ………………G-3
83-0141 ………………A-17
74-047 …………………B-13
774018 …………………G-4
774095 …………………G-4
774091BK ………………G-3
83-0221…………………A-17
74-048 …………………B-13
774019 …………………G-5
774096 …………………G-4
774095BK ………………G-4
83-0231…………………A-17
74-999 …………………B-12
774020 …………………G-5
774097 …………………G-4
774099BK ………………G-5
83-0241…………………A-17
770200L ………………G-13
774021 …………………G-8
774098 …………………G-5
774111BK ………………G-2
83-0331…………………A-17
770204L ………………G-13
774022 …………………G-8
774099 …………………G-5
774114BK ………………G-15
83-0341 ………………A-17
770205L ………………G-13
774023 …………………G-8
774100 …………………G-2
774115BK ………………G-3
83-0351…………………A-17
770212L ………………G-13
774024 …………………G-8
774103 …………………G-2
774117BK ………………G-5
83-0421…………………A-17
770213L ………………G-13
774025 …………………G-8
774104 …………………G-3
775101 …………………G-15
83-0431 ………………A-17
770215L ………………G-12
774026 …………………G-10
774105 …………………G-2
775102 …………………G-15
83-0441 ………………A-17
770216L ………………G-12
774027 …………………G-2
774106 …………………G-3
775103 …………………G-15
83-0451 ………………A-17
770217L ………………G-12
774028 …………………G-3
774108 …………………G-3
775104 …………………G-15
83-0511…………………A-17
770218L ………………G-12
774031 …………………G-9
774109 …………………G-3
775111 …………………G-11
83-0521…………………A-17
770219L ………………G-12
774032 …………………G-9
774110 …………………G-3
775121 …………………G-11
83-0531…………………A-17
770221L ………………G-12
774033 …………………G-9
774111 …………………G-2
776111 …………………G-11
83-0541 ………………A-17
770223L ………………G-12
774034 …………………G-9
774112 …………………G-15
776112 …………………G-11
83-0611 ………………A-17
770225L ………………G-13
774035 …………………G-9
774113 …………………G-15
776121 …………………G-11
83-0621 ………………A-17
772240 …………………D-7
774037 …………………G-9
774114 …………………G-15
776211 …………………G-11
83-0631 ………………A-17
772241 …………………D-7
774038 …………………G-7
774115 …………………G-3
776311 …………………G-11
83-2121 ………………A-16
772242 …………………D-7
774039 …………………G-7
774116 …………………G-15
777111 …………………G-11
83-2131 ………………A-16
772243 …………………D-7
774040 …………………G-6
774117 …………………G-5
777111BK ………………G-11
83-2141 ………………A-16
772244 …………………D-7
774045 …………………G-6
774120 …………………G-6
777112 …………………G-11
83-2151 ………………A-16
772245 …………………D-7
774047 …………………G-7
774121 …………………G-6
777121 …………………G-11
83-2221 ………………A-16
772271 …………………G-15
774048 …………………G-7
774122 …………………G-6
777131 …………………G-12
83-2231 ………………A-16
772450 …………………G-13
774049 …………………G-7
774123 …………………G-6
777211 …………………G-11
83-2241 ………………A-16
772451 …………………G-13
774050 …………………G-6
774134 …………………G-15
777212 …………………G-11
83-2251 ………………A-16
772804 …………………D-11
774051 …………………G-10
774136 …………………G-15
777221 …………………G-11
83-2331 ………………A-16
772805 …………………D-11
774052 …………………G-7
774137 …………………G-15
777221BK ………………G-11
83-2341 ………………A-16
Catalog Number Index
13
Index
Cat.
62-184 ……………F-9, F-20
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Index
83-2351 ………………A-16
83-9441 ………………A-19
85-033 …………………F-16
85-334 …………………F-16
86-214 …………………F-23
83-2361 ………………A-16
83-9451 ………………A-19
85-034 …………………F-16
85-344 …………………F-24
86-215 …………………F-23
83-2371 ………………A-16
83-9471 ………………A-19
85-035 …………………F-16
85-346 ……………F-19, F-24
86-216 …………………F-23
83-3261 ………………A-22
83-9481 ………………A-19
85-036 ……………F-16, F-25
85-351 ……………F-19, F-24
86-217 …………………F-23
83-3271 ………………A-22
83-9501 ………………A-19
85-037 ……………F-16, F-25
85-352 ……………F-19, F-24
86-218 …………………F-23
83-3281 ………………A-22
83-9511 ………………A-19
85-038 …………………F-16
85-353 ……………F-19, F-24
86-219 …………………F-23
83-6111 ………………A-18
83-9521 ………………A-19
85-039 …………………F-16
85-366 …………………F-24
86-220 …………………F-23
83-6121 ………………A-18
83-9541 ………………A-19
85-053 …………………F-16
85-393 …………………F-19
86-222 …………………F-23
83-6131 ………………A-18
83-9551 ………………A-19
85-057 …………………F-16
85-394 ……………F-19, F-24
86-223 …………………F-23
83-6161 ………………A-18
83-9571 ………………A-19
85-065 ……………F-16, F-19
85-395 …………………F-19
86-225 …………………F-23
83-6171 ………………A-18
83-9581 ………………A-19
85-066 …………………F-16
85-396 ……………F-19, F-24
86-227 …………………F-23
83-6211 ………………A-18
83-9591 ………………A-19
85-067 ……………F-16, F-25
85-401 …………………F-24
86-229 …………………F-23
83-6221 ………………A-18
83-9601 ………………A-19
85-132 …………………F-16
85-402 …………………F-24
86-230 …………………F-23
83-6231 ………………A-18
83-9611 ………………A-18
85-133 …………………F-16
85-403 …………………F-24
86-232 …………………F-23
83-7011 ………………A-18
83-9621 ………………A-18
85-134 …………………F-16
85-480 …………………F-22
86-233 …………………F-23
83-7021…………………A-18
83-9631 ………………A-18
85-138 …………………F-17
85-490 …………………F-22
86-234 …………………F-23
83-7031 ………………A-18
83-9771…………………A-20
85-200 …………………F-23
85-491 …………………F-22
86-235 …………………F-23
83-7051 ………………A-18
83-9781…………………A-20
85-201 …………………F-23
85-502 ……………F-22, F-25
86-236 …………………F-23
83-7061 ………………A-18
83-9791…………………A-20
85-204 …………………F-23
85-512 …………………F-22
86-237 …………………F-23
83-7071…………………A-18
83-9801 ………………A-21
85-205 …………………F-23
85-513 ……………F-22, F-25
86-239 …………………F-23
83-7081 ………………A-18
83-9911 ………………A-20
85-206 …………………F-23
85-515 …………………F-22
86-241 …………………F-23
83-7091 ………………A-18
83-9921 ………………A-20
85-207 …………………F-23
85-517 ……………F-22, F-25
86-242 …………………F-23
83-7101 ………………A-18
83-9931 ………………A-20
85-208 …………………F-23
85-545 ……………F-22, F-25
86-394 …………………F-24
83-7111…………………A-17
83-9971 ………………A-19
85-209 …………………F-23
85-550 …………………F-22
86-395 …………………F-24
83-7121…………………A-17
83-9981 ………………A-19
85-212 …………………F-23
85-553 …………………F-22
86-396 ……………F-19, F-24
83-7131 ………………A-17
83-9991 ………………A-19
85-213 …………………F-23
85-556 …………………F-22
86-398 …………………F-24
83-7151 ………………A-17
84-016 …………………F-16
85-214 …………………F-23
85-575 …………………F-22
86-401 …………………F-24
83-7161 ………………A-17
84-017 …………………F-16
85-215 …………………F-23
85-588 …………………F-22
86-402 …………………F-24
83-7171…………………A-17
84-018 …………………F-16
85-216 …………………F-23
85-590 …………………F-22
86-403 …………………F-24
83-7201…………………A-17
84-0241 ………………A-17
85-217 …………………F-23
85-770 …………………F-24
86-432 …………………F-16
83-7211…………………A-17
84-030 …………………F-16
85-218 …………………F-23
85-780 …………………F-24
86-433 …………………F-16
83-7221…………………A-17
84-0341 ………………A-17
85-219 …………………F-23
85-900 …………………F-24
86-502 …………………F-22
83-7231…………………A-17
84-039 …………………F-16
85-220 …………………F-23
85-925 …………………F-24
86-925 …………………F-24
83-8001 ………………A-20
84-2241 ………………A-16
85-222 …………………F-23
85-950 …………………F-24
86-950 …………………F-24
83-8011 ………………A-20
84-2341 ………………A-16
85-223 …………………F-23
85-960 …………………F-24
87-002 …………………A-29
83-8101 ………………A-20
84-6171 ………………A-18
85-225 …………………F-23
86-016 ……………F-16, F-25
87-005 …………………A-29
83-8111 ………………A-20
84-7111 ………………A-17
85-227 …………………F-23
86-017 ……………F-16, F-25
87-007 …………………A-29
83-9001 ………………A-21
84-7161 ………………A-17
85-229 …………………F-23
86-030 ……………F-16, F-25
87-008 …………………A-29
83-9011 ………………A-21
84-7171…………………A-17
85-230 …………………F-23
86-039 …………………F-16
87-009 …………………A-29
83-9021 ………………A-21
84-7221…………………A-17
85-232 …………………F-23
86-132 …………………F-16
87-010 …………………A-29
83-9031 ………………A-21
84-9021 ………………A-21
85-233 …………………F-23
86-133 …………………F-16
87-011 …………………A-29
83-9041 ………………A-21
84-9031 ………………A-21
85-234 …………………F-23
86-134 …………………F-16
87-012 …………………A-29
83-9071 ………………A-21
84-9081 ………………A-21
85-236 …………………F-23
86-200 …………………F-23
87-015 …………………A-29
83-9081 ………………A-21
84-9281 ………………A-22
85-237 …………………F-23
86-201 …………………F-23
87-016 …………………A-29
83-9091 ………………A-21
84-9291 ………………A-22
85-239 …………………F-23
86-202 …………………F-23
87-017 …………………A-29
83-9281 ………………A-22
84-9301 ………………A-22
85-241 …………………F-23
86-203 …………………F-23
87-018 …………………A-29
83-9291 ………………A-22
84-9581 ………………A-19
85-242 …………………F-23
86-204 …………………F-23
87-040 …………………A-29
83-9301 ………………A-22
84-9781…………………A-20
85-244 …………………F-23
86-205 …………………F-23
87-042 …………………A-29
83-9351 ………………A-22
84-9791…………………A-20
85-245 …………………F-23
86-206 …………………F-23
87-044 …………………A-29
83-9361 ………………A-22
85-016 ……F-16, F-21, F-25
85-246 …………………F-23
86-207 …………………F-23
87-046 …………………A-29
83-9371 ………………A-22
85-017 ……………F-16, F-21
85-311 …………………F-17
86-208 …………………F-23
87-048 …………………A-29
83-9401 ………………A-21
85-030 ……………F-16, F-25
85-323 …………………F-17
86-209 …………………F-23
87-126 …………………A-30
83-9411 ………………A-19
85-031 …………………F-16
85-332 …………………F-16
86-212 …………………F-23
87-129 …………………A-30
83-9421 ………………A-19
85-032 …………………F-16
85-333 …………………F-16
86-213 …………………F-23
87-132 …………………A-30
14
Catalog Number Index
Catalog Number Index
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
89-026 ……………F-16, F-19
89-408 …………………A-24
90-085 …………………C-54
B1-B ……………………A-36
87-138 …………………A-30
89-054 ……F-15, F-18, F-25
89-410 …………………A-24
90-086 …………………C-54
B1-SK …………………A-36
87-141 …………………A-30
89-055 ……F-15, F-18, F-25
89-412 …………………A-24
90-087 …………………C-54
B2-1 ……………………A-36
87-143 …………………A-30
89-056 ……………F-15, F-18
89-414 …………………A-25
90-088 …………………C-54
B-21-175-0-L …………G-16
87-144 …………………A-30
89-057 ……F-15, F-19, F-25
89-417 …………………A-25
90-089 …………………C-54
B-21-175-9-L …………G-16
87-145 …………………A-30
89-058 ……F-15, F-19, F-25
89-423 …………………A-25
90-090 …………………C-54
B2-25 …………………A-36
87-150 …………………A-31
89-059 ……………F-15, F-25
89-424 …………………A-25
90-091 …………………C-54
B2-350JR ………………A-36
87-152 …………………A-31
89-430 …………………A-25
90-092 …………………C-54
B-24-175-0-L …………G-16
87-156 …………………A-31
89-060 ……F-15, F-18, F-19,
F-25
89-434 …………………A-25
90-124 …………………C-55
B-24-175-9-L …………G-16
87-180 …………………A-31
89-060P ……F-15, F-19, F-25
89-435 …………………A-25
90-128 …………………C-55
B2-500JR ………………A-36
87-182 …………………A-31
89-104 ……………F-15, F-25
89-436 …………………A-25
90-154 …………………C-55
B2-B ……………………A-36
87-186 …………………A-31
89-105 ……………F-15, F-25
89-437 …………………A-25
90-155 …………………C-55
B2-SK …………………A-36
87-190 …………………A-31
89-106 …………………F-15
89-438 …………………A-25
90-156 …………………C-55
B-30-175-0-L …………G-16
87-194 …………………A-31
89-159 ……………F-15, F-25
89-439 …………………A-25
90-157 …………………C-55
B-30-175-9-L …………G-16
87-370 …………………A-31
89-160 ……………F-15, F-25
89-504 …………………A-24
90-158 …………………C-55
B-36-175-0-L …………G-16
87-372 …………………A-31
89-160P …………F-15, F-25
89-505 …………………A-24
90-159 …………………C-55
B-36-175-9-L …………G-16
87-374 …………………A-31
89-165 …………………F-16
89-5057 …………F-15, F-25
90-160 …………………C-55
B4-1 ……………………A-36
87-563 …………………A-32
89-202 …………………A-23
89-5058 …………F-15, F-25
90-161 …………………C-55
B-4-1-0-M ……………G-16
87-564 …………………A-32
89-203 …………………A-23
89-506 …………………A-24
90-170 …………………C-55
B-4-18-0-C ……………G-16
87-583 …………………A-33
89-204 …………………A-23
89-507 …………………A-24
90-171 …………………C-55
B-4-18-9-C ……………G-16
87-585 …………………A-33
89-206 …………………A-23
89-508 …………………A-24
90-173 …………………C-55
B4-25 …………………A-36
87-650 …………………A-32
89-208 …………………A-23
89-509 …………………A-24
90-174 …………………C-55
B-48-175-0-L …………G-16
87-651 …………………A-32
89-210 …………………A-23
89-512 …………………A-24
90-176 …………………C-55
B-48-175-9-L …………G-16
87-652 …………………A-32
89-212 …………………A-23
89-513 …………………A-24
93-9051 ………………A-21
B4-B ……………………A-36
87-653 …………………A-32
89-224 …………………A-25
89-514 …………………A-25
B102 ……………………A-60
B-6-30MT-9-C …………G-16
87-654 …………………A-32
89-229 …………………A-25
89-516 …………………A-25
B104 ……………………A-60
B-6-40-0-C ……………G-16
87-655 …………………A-32
89-230 …………………A-25
89-518 …………………A-25
B106 ……………………A-60
B-6-40-0-M ……………G-16
87-656 …………………A-32
89-233 …………………A-25
89-520 …………………A-25
B108 ……………………A-60
B-6-40-9-C ……………G-16
87-657 …………………A-32
89-234 …………………A-25
89-525 …………………A-25
B1-1 ……………………A-36
B-6-40-9-M ……………G-16
87-658 …………………A-32
89-235 …………………A-25
89-608 …………………A-26
B-11-120-0-C …………G-16
B-8-18-0-C ……………G-16
87-681 …………………A-32
89-236 …………………A-25
89-610 …………………A-26
B-11-120-9-C …………G-16
B-8-18-9-C ……………G-16
87-682 …………………A-32
89-237 …………………A-25
89-612 …………………A-26
B112 ……………………A-60
B-8-50-0-C ……………G-16
87-683 …………………A-32
89-238 …………………A-25
89-614 …………………A-26
B-11-40-0-C……………G-16
B-8-50-0-M ……………G-16
87-685 …………………A-32
89-239 …………………A-25
90-041 …………………G-14
B-11-40-9-C……………G-16
B-8-50-2-C ……………G-16
87-686 …………………A-32
89-302 …………………A-23
90-042 …………………G-14
B-11-50-0-C……………G-16
B-8-50-5-C ……………G-16
87-687 …………………A-32
89-304 …………………A-23
90-044 …………………G-14
B-11-50-0-D …………G-16
B-8-50-9-D ……………G-16
87-700 …………………A-33
89-306 …………………A-23
90-051 …………………G-14
B-11-50-9-300 …………G-16
B-8-50-9-M ……………G-16
87-701 …………………A-33
89-308 …………………A-23
90-052 …………………G-14
B-11-50-9-C……………G-16
B-8-50MT-0-C …………G-16
87-702 …………………A-33
89-310 …………………A-23
90-053 …………………G-14
B-11-50-9-C……………G-16
B-8-50MT-9-C …………G-16
87-703 …………………A-33
89-312 …………………A-23
90-054 …………………G-14
B-11-50-9-D …………G-16
BCCL-125-9-C …………G-16
87-704 …………………A-33
89-314 …………………A-25
90-055 …………………G-14
B1-25 …………………A-36
BCCL-250-9-C …………G-16
87-706 …………………A-33
89-317 …………………A-25
90-061 …………………C-54
B1-250JR ………………A-36
BCCL-375-9-C …………G-16
87-736 …………………A-33
89-323 …………………A-25
90-063 …………………C-54
B-14-120-0-L …………G-16
BCCL-500-9-C …………G-16
87-738 …………………A-33
89-324 …………………A-25
90-065 …………………C-54
B-14-120-9-L …………G-16
BCS1-1 …………………D-10
87-900 …………………F-24
89-330 …………………A-25
90-066 …………………C-54
B-14-18-9-M …………G-16
BCS1-5 …………………D-10
87-925 …………………F-24
89-334 …………………A-25
90-067 …………………C-54
B-14-50-0-C……………G-16
BCS1-5M ………………D-10
87-950 …………………F-24
89-335 …………………A-25
90-068 …………………C-54
B-14-50-0-D …………G-16
BCS1-JR ………………D-10
87-958 …………………A-32
89-336 …………………A-25
90-070 …………………C-54
B-14-50-9-C……………G-16
BCS2-1 …………………D-10
88-100 …………………A-32
89-337 …………………A-25
90-073 …………………C-54
B-14-50-9-D …………G-16
BCS2-5 …………………D-10
88-843 …………………C-31
89-338 …………………A-25
90-080 …………………C-54
B-14-50MT-0-C ………G-16
BCS2-5M ………………D-10
89-011 ……………F-15, F-25
89-339 …………………A-25
90-081 …………………C-54
B-14-50MT-9-C ………G-16
BCS2-JR ………………D-10
89-014SM ………F-16, F-25
89-402 …………………A-24
90-082 …………………C-54
B1-500JR ………………A-36
BCTT-100 ………………G-16
89-014SMRCA …F-16, F-25
89-404 …………………A-24
90-083 …………………C-54
B-17-175-0-L …………G-16
BCTT-200 …………D-9, G-16
89-015 …………………F-18
89-406 …………………A-24
90-084 …………………C-54
B-17-175-9-L …………G-16
BGR-1 …………………A-36
Catalog Number Index
15
Index
Cat.
87-135 …………………A-30
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Cat.
Page
Index
BGR-25…………………A-36
C-700 …………………E-10
IT1000CCL2-C …………D-7
IT4I-C ……………………D-4
L-5559 ……………C-8, C-9
BGR-B …………………A-36
C-760 …………………E-12
IT1000MP-C ……………D-7
IT4I-C0 …………………D-4
L-5560 ……………C-8, C-9
BICS2-JR ………………D-10
C-770……………………E-13
IT1000MP-C0 ……………D-7
IT4LH-L …………………D-5
L-5561 ……………C-8, C-9
BICS-JR ………………D-10
IT10H-L …………………D-5
IT4LH-L0 ………………D-5
L-5562 ……………C-8, C-9
BMICS-JR ……………D-10
C-90 …E-11, E-26, E-27, E-28,
E-32
IT10H-L0…………………D-5
IT4LHMH-C ……………D-6
L-5563 ……………C-8, C-9
BMP-1000-0-C ………G-16
F-956 ……………………E-17
IT11H-L …………………D-5
IT4LHMH-C0 ……………D-6
L-5564 ……………C-8, C-9
BMP-1000-9-C ………G-16
FIBERTEKALLB …………F-5
IT11H-L0…………………D-5
IT4S-C ……………D-2, D-5
L-5616 …………………C-11
BMP-750-0-C …………G-16
FIBERTEKALLP …………F-5
IT125CCL-C ……………D-7
IT4S-C0 ……………D-2, D-5
L-5617 …………………C-11
BMP-750-9-C …………G-16
FIBERTEKMMB …………F-5
IT14H-L …………………D-5
IT4S-D ……………D-2, D-5
L-5618 …………………C-11
BMSE150-1 ……………D-11
FIBERTEKMMP …………F-5
IT14H-L0…………………D-5
IT4S-D0 …………………D-5
L-5619 …………………C-11
BMSE175-1 ……………D-11
FIBERTEKSMP …………F-5
IT14H-L8…………………D-5
IT4SID-C…………………D-6
L-5620 ……C-13, C-14, F-26
BP-958 …………………E-17
H-2909 …………………C-14
IT1LPMB-C ……………D-6
IT4SMH-C ………………D-6
L-7625………………C-8, C-9
BPCXSB-JR ……………D-11
H-3324 …………………F-7
IT1M-C …………………D-4
IT500CCL2-C ……………D-7
L-8762 …………………C-13
BPCXSW-JR……………D-11
H-3412 …………………F-7
IT1M-C0 …………………D-4
IT5LH-L …………………D-5
L-8763……………C-13, C-14
BPDATAS-JR …………D-11
H-632 …………………A-10
IT1MID-C ………………D-6
IT5LH-L0 ………………D-5
L-9038 …………………C-11
BPLVSB-JR ……………D-11
HSC-1 …………………A-10
IT1M-M …………………D-4
IT5S-C……………………D-5
L-9039 …………………C-11
BPLVSW-JR ……………D-11
IA-3240 …………D-19, D-20
IT1SMB-C ………………D-6
IT5S-CO …………………D-5
L-9225 ……………F-12, F-27
BPS2/2-50 ……………D-10
IA-3241…………………D-21
IT1SMB-C0 ……………D-6
IT625CCL2-C ……………D-7
L-9226 …………………F-12
BPS2/3-50 ……………D-10
IA-4868 …………………F-7
IT250CCL-C ……………D-7
IT6EH-C0 ………………D-5
L-9300 ……………C-8, C-9
BPS2/4-50 ……………D-10
IA-4989 ………………D-22
IT250CCL-C0 ……………D-7
IT750CCL2-C ……………D-7
LA-2358 ………………C-14
BPS2-1 …………………D-10
IA-4990 ………………D-22
IT2I-C ……………………D-4
IT750MP-C………………D-7
BPS2-30K………………D-10
IC-958 …………………E-17
IT2I-C0 …………………D-4
IT750MP-C0 ……………D-7
LA-3953 …C-13, F-12, F-18,
F-19
BPS2-5 …………………D-10
IMET1_5I-C ……………D-3
IT2I-M……………………D-4
IT7H-L …………………D-5
LA-4123 ………………C-29
BPS2-5M ………………D-10
IMET1_5I-C0 ……………D-3
IT2I-M0 …………………D-4
IT7H-L0 …………………D-5
LA-4124 ………………C-29
BPS2B-JR………………D-10
IMET1M-C ………………D-3
IT2LH-C …………………D-5
IT7LH-L …………………D-5
LA-4125 ………………C-45
BPS2-JR ………………D-10
IMET1M-CO ……………D-3
IT2LH-C0 ………………D-5
IT7LH-L0 ………………D-5
LA-4126 ………………C-45
BPS3-1 …………………D-10
IMET2S-C ………………D-3
IT2M-C …………………D-4
K-2422 …………………A-28
LA-4127 ………………C-45
BPS3-2 …………………D-10
IMET2S-C0………………D-3
IT2M-C0 …………………D-4
K-7515 …………………E-6
LA-4128 ………………C-45
BPS3-50 ………………D-10
IMET2S-M ………………D-3
IT2M-M …………………D-4
K-7920……………………F-6
LA-4144 …………………F-9
BPS3-JR ………………D-10
IMET2S-M0 ……………D-3
IT2S-C ……………D-2, D-5
K-7921 …………………F-20
LA-4145 …………………F-9
BPS4-50 ………………D-11
IMET3I-C ………………D-3
IT2S-C0 ……………D-2, D-5
K-8906R ………………C-30
LA-4157 …………………F-7
BR-5 ……………………A-10
IMET3I-C0 ………………D-3
IT2S-C30…………………D-5
K-8909 …………………C-30
LA-4159 …………………F-7
BSER2-25………………D-11
IMET3I-M ………………D-3
IT2S-C35…………………D-2
K-8926 …………………C-30
LA-4173 …………………F-7
BSER4/0-5 ……………D-11
IMET3I-M0………………D-3
IT2S-C702 ………………D-2
K-8947R ………………C-30
LA-4218 …………………B-6
BSER6-50………………D-11
IMET3S-C ………………D-3
IT2SID-C…………………D-6
K-8985 …………………B-6
LA-4233 …………………F-7
BSEU2-25………………D-11
IMET3S-C0………………D-3
IT2S-M ……………D-2, D-5
L-1953 …………………C-13
LA-4234 …………………F-7
BSEU4/0-5 ……………D-11
IMET3S-M ………………D-3
IT2S-M0 ……………D-2, D-5
L-4419 …………C-13, C-14
LA-4235 …………………F-7
BSEU6-50 ……………D-11
IMET3S-M0 ……………D-3
IT2SMB-C ………………D-6
L-4419M ………………C-14
LANTEK6……………F-2, F-3
BTC1/0-10 ……………A-40
IMET4LH-D ……………D-3
IT2SMB-C0 ……………D-6
L-4420 …………C-13, C-14
LANTEK6A …………F-2, F-3
BTC2/0-14 ……………A-40
IMET4LH-D0 ……………D-3
IT2SMH-C …………D-2, D-6
L-4421 …………C-13, C-14
LANTEK6ABAS ……F-3, F-4
BTC250-4 ………………A-40
IMET4LH-L………………D-3
IT2SMH-C0 ………D-2, D-6
L-4421M ………………C-14
LANTEK6APREM …F-3, F-4
BTC350-1/0 ……………A-40
IMET4LH-L0 ……………D-3
IT2SMH-M…………D-2, D-6
L-4422 …………C-13, C-14
LANTEK6ATRV ……F-3, F-4
BTC4/0-10 ……………A-40
IMET4S-C ………………D-3
IT375CCL2-C ……………D-7
L-4452 …………………C-13
LANTEK6B …………F-3, F-4
BTC4/0-4 ………………A-40
IMET4S-C0………………D-3
IT375CCL2-C0 …………D-7
L-4994 …………………C-14
LANTEK7G …………F-2, F-3
BTC4/0-6 ………………A-40
IMET4S-M ………………D-3
IT3I-C ……………………D-4
L-5210………………C-8, C-9
LANTEK7GBAS ……F-3, F-4
BTC500-1/0 ……………A-40
IMET4S-M0 ……………D-3
IT3I-C0 …………………D-4
L-5211………………C-8, C-9
LANTEK7GPREM …F-3, F-4
BTC500-14 ……………A-40
IT1_5I-C …………………D-4
IT3S-C ……………D-2, D-5
L-5212 …………………C-11
LANTEK7GTRV ……F-3, F-4
BTC500-4 ………………A-40
IT1_5I-C0 ………………D-4
IT3S-C0 ……………D-2, D-5
L-5215 …………………C-11
LB-1001 …………C-13, C-14
BTC750-250 ……………A-40
IT1_5I-M…………………D-4
IT3S-C35…………………D-2
L-5217 …………………C-11
LB-1001M ……………C-14
BTCA-2 …………………A-40
IT1_5I-M0 ………………D-4
IT3S-C702 ………………D-2
L-5269 …………………C-11
LB-1002 …………C-13, C-14
C-24 ……………A-39, C-31
IT1_5IMH-C ……………D-6
IT3S-D ……………D-2, D-5
L-5270 …………………C-11
LB-1002M………………C-14
C-290 E-3, E-4, E-5, E-6, E-24,
E-32.
IT1_5IMH-C0 ……………D-6
IT3S-D0 ……………D-2, D-5
L-5361 …………C-13, C-14
LB-1003 …………C-13, C-14
IT1_5M-C ………………D-4
IT3SMH-C ………………D-6
L-5361M ………………C-14
LB-1004 …………C-13, C-14
C-50 ……………………E-25
IT1_5M-C0 ………………D-4
IT3SMH-C0 ……………D-6
L-5436 ……………C-8, C-9
LB-1005 …………C-13, C-14
16
Catalog Number Index
Catalog Number Index
Page
Cat.
Page
TL-104 ……E-12, E-13, E-33
LB-1090 ………………C-11
TL-435 …………………E-33
LB-1091 ………………C-11
TL-436 …………………E-33
LB-1092 ………………C-11
TL-532 ……………E-22, E-24
LB-1151 ………………C-11
TL-58 ………E-6, E-11, E-33
LB-1152 …………C-11, F-26
TL-80 ……………………E-27
LB-1153 …………C-11, F-26
TL-82 ……………………E-27
LB-1154 ………………C-11
TL-956 …………………E-17
LB-1155 ………………C-11
TLA1-956 ………………E-17
LB-1156 ………………C-11
TLA2-956 ………………E-17
LB-1184 ………………C-11
TLAC-956 ………………E-17
LB-1185 ………………C-11
TLBP-956 ………………E-17
LB-1186 ………………C-11
TLF-252 …………………E-33
LB-1187 ………………C-11
TLGP-956 ………………E-17
LB-1188 ………………C-11
TLOP-956 ………………E-17
LB-1189 ………………C-11
TRACETEKMM …………F-5
LB-1190 ………………C-11
TRACETEKSM …………F-5
LB-1194 ………………C-11
VFF5 ……………………F-28
LB-1195 …………C-11, C-13
WGR-1 …………………A-38
LB-1421 …………C-13, C-14
WGR-500JR ……………A-38
LB-1747 …………………F-10
WGR-B …………………A-38
LB-1748…………………F-13
WGR-SK ………………A-38
LB-197 …………………C-11
WT1-1 …………………A-37
LB-198 …………………C-11
WT1-B …………………A-37
LB-718 …………………C-11
WT2-1 …………………A-37
LB-719 …………………C-11
WT2-B …………………A-37
LB-720 …………………C-11
WT3-1 …………………A-37
LB-721 …………………C-11
WT3-B …………………A-37
LB-722 …………………C-11
WT4-1 …………………A-37
LB-727 …………………C-11
WT41-1…………………A-38
LB-728 …………………C-11
WT41-500JR …………A-38
LB-729 …………………C-11
WT41-B ………………A-38
LB-730 …………………C-11
WT41-SK ………………A-38
LB-731 …………………C-11
WT4-B …………………A-37
LB-740……………C-13, F-12
WT51-1…………………A-38
LB-742 …………………C-13
WT51-4…………………A-38
LB-743……………C-13, F-12
WT51-500JR …………A-38
LB-744 …………………C-13
WT5152JR ……………A-38
LB-882 …………………C-11
WT51-B ………………A-38
LB-883 …………………C-11
WT51-SK ………………A-38
LB-895 …………………C-11
WT52-1…………………A-38
LB-896 …………………C-11
WT52-500JR……………A-38
LB-911 ……………C-9, C-10
WT52-B ………………A-38
LB-912 ……………C-9, C-10
WT52-SK ………………A-38
LB-913 ……………C-9, C-10
WT54-B ………………A-38
LB-914 ……………C-9, C-10
WT6-1 …………………A-37
LB-915 ……………C-9, C-10
WT6-B …………………A-37
Cat.
Page
Cat.
Page
Cat.
Page
Index
Cat.
LB-1089 ………………C-11
LB-916 ……………C-9, C-10
LB-917 ……………C-9, C-10
LB-918 ……………C-9, C-10
LB-920 ……………C-9, C-10
LB-921 ……………C-9, C-10
PA-830 …………………E-22
TL-100 …E-3, E-4, E-5, E-33
TL-102 ……E-10, E-26, E-33
Catalog Number Index
17
Customer Service/
Technical Support
It has long been a goal at IDEAL to serve our customers and distributors more
effectively than anyone in the industry. A promise of helping our customers and
distributors in any way we can comes with every product we ship.
• Customer service and technical support representatives available
Monday through Friday, 7 a.m. to 7 p.m. CST
• Complete offering of marketing/sales literature within 24 hours of request
Merchandising
Point-of-purchase communication is an important aspect of the IDEAL sales
strategy. We are committed to helping our distributors move our products off
their shelves. To do that, we’ve developed a variety of exciting, thoughtful ways
to increase a store’s association with IDEAL and build repeat customers.
Promotions
There is no substitute for the impact that an effectively managed national
promotion can achieve. Our record of exciting and successful promotions is
second-to-none in the industry. The annual Collectible Toy Truck promotion, for
example, has become a phenomenon of its own and helps sell millions of wire
connectors. With a well-designed promotion, everyone wins.
Distribution Center
Our new state-of-the-art facility located at IDEAL headquarters in
Sycamore, IL is responsible for making sure our products arrive on time and
as ordered to our customers around the world. Our employees manage an
inventory of thousands of different products, ensuring they’re available
when our customers need them. Orders received by 1 p.m. are normally shipped
by 5 p.m. of the same day.
IDEAL INDUSTRIES, INC.
Corporate Headquarters
Becker Place
Sycamore, IL 60178, USA
ph: 815-895-5181 • 800-435-0705 in USA
fax: 815-895-9470 • 800-533-4483 in USA
email: ideal@idealindustries.com
IDEAL INDUSTRIES, INC.
International Division
Becker Place
Sycamore, IL 60178, USA
ph: 815-895-1122
fax: 815-895-4800
email: ideal_international@idealindustries.com
IDEAL INDUSTRIES PUERTO RICO, INC.
PMB 196
405 Esmeralda, Suite 102
Guaynabo, Puerto Rico 00969, USA
ph: 787-412-7215
fax: 787-731-1128
IDEAL INDUSTRIES (CANADA), CORP.
33 Fuller Road
Ajax, Ontario L1S 2E1, Canada
ph: 905-683-3400 • 800-824-3325 in Canada
fax: 905-683-0209 • 800-263-3115 in Canada
email: ideal_canada@idealindustries.com
IDEAL INDUSTRIES (AUST) PTY. LTD.
Level 6
75-85 Elizabeth Street
Sydney NSW 2000 Australia
ph: 61300 765 800 • 61405 123 100 (mobile)
fax: 61300 765 801
email: ideal_australia@idealindustries.com
IDEAL INDUSTRIES (UK) LIMITED
225 Europa Boulevard, Gemini Business Park
Warrington, Cheshire, WA5 7TN, UK
ph: +44-(0) 1925 444446
fax: +44-(0) 1925 445501
email: ideal_uk@idealindustries.com
IDEAL INDUSTRIES GmbH
Gutenbergstrasse 10
85737 Ismaning, Germany
ph: +49-(0) 89 996860
fax: +49-(0) 89 99686111
email: ideal_germany@idealindustries.com
IDEAL INDUSTRIES CHINA, LLC
Unit 911, Tower W1, The Towers, Oriental Plaza
No. 1 East Chang An Avenue, Dong Cheng District
Beijing, 100738, China
ph: 86-10-8518-3141 • 86-10-8518-3142
fax: 86-10-8518-3143
Room 1401, Finance Square, 333 Jiujiang Road
Shanghai, 2000001, China
ph: 86-21-6360-7045
fax: 86-21-6350-8891
email: ideal_china@idealindustries.com
IDEAL INDUSTRIES BRAZIL COMÉRCIO LTDA.
Av. Major Sylvio de Magalhães Padilha, 5200
Bloco F, Cj 201 CEP - 05677-000 São Paulo – SP - Brazil
ph: 55-11-3759-8777
fax: 55-11-3759-8775
email: ideal_brazil@idealindustries.com
IDEAL INDUSTRIES MEXICO, INC.
Parque Intermex, Periferico Sur 7999 A
Col. Santa Maria Tequepexpan
Tlaquepaque, Jalisco, Mexico, c.p. 45601
ph: 52-33-37702320 • 52-33-38097219 (mobile)
fax: 52-33-37702300
CUSTOMER SERVICE 800-435-0705
email: ideal@idealindustries.com
QUALITY HOTLINE 800-304-3578
email: quality@idealindustries.com
TECHNICAL HOTLINE 800-338-4495
email: techsupt@idealindustries.com
®
www.idealindustries.com
®
Wire Termination
DataComm Equipment
Test & Measurement
Wire Installation
Tools & Totes
Wire Management
IDEAL INDUSTRIES, INC.
Becker Place, Sycamore, IL 60178, USA / 815-895-5181 • 800-435-0705 in USA
International offices: Australia • Brazil • Canada • China • Germany • Mexico • UK
For complete sales office contact information, visit us at:
www.idealindustries.com
Rev. 7/07
Form No. P-070
Printed in USA
©2007 IDEAL INDUSTRIES, INC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 for Macintosh Create Date : 2007:07:11 15:45:32-05:00 Modify Date : 2008:07:10 09:31:36-04:00 Creator Tool : QuarkXPress: pictwpstops filter 1.0 Metadata Date : 2008:07:10 09:31:36-04:00 Format : application/pdf Creator : admin user Title : Unknown Document ID : uuid:1df4eb60-2ff0-11dc-be1d-001451111306 Instance ID : uuid:bac669d2-a4dd-4e02-875b-384772c25fa9 Has XFA : No Page Count : 282 Author : admin userEXIF Metadata provided by EXIF.tools