171789 Catalog
2014-07-29
: Pdf 171789-Catalog 171789-Catalog 051712 Batch6 unilog
Open the PDF directly: View PDF 
.
Page Count: 33
| Download | |
| Open PDF In Browser | View PDF |
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents RAIL & BASE MOUNT TERMINAL BLOCKS General Specifications & Accessories for Rail Mount Terminal Blocks NDN Series .250” and .300” Centers NDN Series.375” and .635” Centers N & NFT Series .197”, .281” and .390” Centers NC, NSE & NSS Series 1.06” and .385” Centers PLU & PSU Series .390” and .625” Centers KT & PLK Series .250” and .390” Centers NTQ, BNQ & BQQ Series .390” and .437” Centers NDN Fuse Holders UB Series Circuit Breakers 15188 Series .375” Centers; 30A, 600V KU Series .625” Centers; 50A, 600V DOUBLE ROW TERMINAL BLOCKS Magnum® TB Series 100 .375” Centers; 20A, 300V Magnum® TB Series 200 .437” Centers; 20A, 300-600V Magnum® TB Series 300 .562” Centers; 20A-45A, 600V Magnum® TB Series 400 .687” Centers; 75A, 600V Magnum® TB Series Options Markings, Marker Strips, Covers PAGES 3 4 5 6 7 8 9 10 11 12 13 14 15 & 16 17 & 18 19 & 20 21 22 & 23 POWER TERMINAL BLOCKS QC Power Distribution .562” and .687” Centers; Ratings 40A, 250V and 70A, 600V Barrier Terminal .968” Centers; Rating 115A, 600V Dead Front Terminal .500” Centers; Rating 90A, 600V Splicer Terminal .812” thru 2.687” Centers; Ratings to 620A, 250V Power Distribution.812” thru 2.687” Centers; Ratings to 840A, 600V Connector/Stud .812” thru 2.687” Centers; Ratings to 760A, 600V Multiple-Input 1.78” Centers; Ratings 285A, 600V 24 25 25 26 27 28 29 MISCELLANEOUS Photo Control Receptacle 13661 Series Non-Fused Disconnect ND-1260 Series 30 31 Bussmann Information Fax ~ 414.527.1450 Get the latest, most up-to-date specification data on products listed in this catalog by calling Bussmann Information Fax. BIF is a simple to use automated fax response system. No need to wait for normal business hours, BIF is available around the clock for your convenience. All you need is a touch-tone telephone and a fax machine to get specification data when you want it. A BIF document number is indicated with each product in this catalog. To get a detailed specification sheet simply call 314-527-1450 and follow the prompts. In a matter of minutes, a data sheet will be faxed to you. It’s that simple! © 1995 Cooper Industries, Bussmann Division Printed in U.S.A. This catalog is intended to present product data and provide technical information that will help the end user with design application. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this catalog. Once a product has been selected, it should be tested by the user in all possible applications. Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com ® MAGNUM Electrical Products Terminal Blocks / Distribution Blocks / Quick Connect Blocks / Disconnects Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Next GET CONNECTED WITH US Bussmann Circuit Components Bussmann Circuit Components has the most complete selection of barrier style terminal blocks in North America. The MAGNUM® brand pioneered the development of high barrier, unbreakable single-row terminal strips for electrical/ electronic equipment. Accepted nationally, Magnum is a leader in the field of terminal blocks, boards or strips. Molded of flexible, resilient thermoplastic which eliminates barrier and strip breakage and enables molding much longer strips for convenience and utility, it is lighter than thermoset phenolic. Rated at 94VO, it also offers higher dimensional accuracy, higher insulating quality and lower heat absorption during wave soldering. Complementing its full electronic product line, BCC offers Double Row Terminal Blocks, which are one of the most widely used devices for terminating wires. Versatile and cost effective, only a screwdriver is needed for installation, eliminating time consuming splicing. High density circuitry conserves panel space with a variety of termination styles. Increased insulation is provided to stop leakage and short circuits. In the field, the high costs of changes are reduced by simply rearranging wire. Other BCC terminal block products include junction blocks, power distribution blocks, sectional terminal blocks, 35mm DIN Rail terminal blocks, I/O connectors and MAGMASTER® interface systems. The BCC design team is organized into three product areas: Terminal Blocks, Circuit Breakers and Custom Products. Thus, we concentrate our efforts on creative designs and practical solutions for customer needs. Our design engineers use state-of-the-art technology including advanced computer aided design techniques. Employing high-tech methods enables BCC to rapidly transform design ideas into working models, expedited by our in-house model shop. Prototypes are ready in weeks . . . not months. BCC maintains a complete lab facility for performing UL, CSA & IEC qualification testing. This saves time and money by eliminating costly expenses and procedures involved in gaining approvals. To keep in touch with everchanging industry advances, BCC actively participates in respected industry organizations including NEMA, SAE, and UL. Our design engineers hold positions on several committees that influence the establishment of industry standards. Quality parts are produced by employees with an average of 10 years' experience with BCC. Employees take great pride in their workmanship and the success of Bussmann Circuit Components. Their strong work ethic along with quality assembly equipment assures highly reliable products. The BCC commitment to quality parts and service is apparent throughout the production process. Our comprehensive quality systems are based on the Total Quality Management philosophy. They start with conceptual design and encompass every functional area of BCC. Employee training, Continuous Quality Improvement Programs, Failure Mode Effects Analysis (FMEA), CP and Cpk statistical methods and the use of process and quality control documents such as SPC are all used. These systems measure both company and supplier activities providing the framework that ensures quality products. ISO 9000 Quality Standards are fully respected and current agency compliances include UL, CSA, VDE, IEC and SAE. BCC has been the recipient of several quality assurance certifications including the prestigious “Ford Q1” Award. When searching for a solution to your electronic circuit protection or connection needs, you can rely on Bussmann Circuit Components. Get Connected With Us. 2 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Series NDN Rail Mount Terminal Blocks 35mm DIN Rail Compatible High density design: Up to 48 circuits per foot Clamping collar: Secures wires Large, captive, wire-ready screws: Speeds assembly Snap-on installation to DIN rail: Fast, easy assembly Fully shielded construction: 600V spacings Unique one-piece construction: Increases reliability Thermoplastic moldings: Strong and impact resistant Material: UL Recognized 94V-2 thermoplastic Collars: Heat treated stainless steel Terminals: Tin plated copper alloy Screws: Zinc plated steel Approvals: UL E62622; CSA LR15364; CE Pending NDNF1 Single pole fuseholder accepts 13/32” x1-1/2” fuses NDN1/ NDN111 Heavy-duty 90 Amp block NDN3 Space saving 3-pole unit NDN63 Accepts wires larger than standard control circuits NDNV4 High Density 48 circuits per foot NDNA200 Universal aluminum 35mm DIN mounting rail Series NDN Terminal Block Accessories NDNA NDNAS 35mm DIN rail 35mm DIN rail Aluminum End Stop NDNA 100 1 meter NDNA 200 2 meters NFTA C-rail Aluminum Lengths to 72” NRA SOA72 MARKING C-rail 72” long TAPE Low profile Stand-Off Channel See series No flange for C-rail specifications Aluminum Lengths to 37-1/2” JUMPERS See series specifications BIF document: 1400 3 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Next Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Rail Mount Terminal Blocks GET CONNECTED WITH US NDNV4 Inches (Millimeters) SPECIFICATIONS Rating: NDNV4 30A, 600V; UL/CSA Center spacing: .250” (6.35) Number of poles: 4 Circuits per foot: 48 Circuit jumper: JN4, 4 circuits Wire size: AWG #10-22 CU Screw size: #6-32 Mounting options: 35mm DIN rail, C-rail Marking tape: MTC6 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.00 (25.40) 1.34 (34.04) Marking Tape 1.67 1.47 1.23 (42.41) (37.33) (31.24) NDN3 Inches (Millimeters) SPECIFICATIONS Rating: 30A - field wiring; 40A - factory wiring 600V; UL/CSA Center spacing: .300” (7.62) Number of poles: 3 Circuits per foot: 38 Circuit jumper: JNDN3, 2 circuits Wire size: AWG #10-22 CU Screw size: #6-32 Mounting options: 35mm DIN rail, C-rail Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.47 (37.33) 1.67 (42.41) .94 (23.87) 1.31 (33.27) BIF document: 1401 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 4 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Rail Mount Terminal Blocks NDN63 Inches (Millimeters) SPECIFICATIONS Rating: 65A, 600V; UL/CSA Center spacing: .375” (9.52) Number of poles: 3 Circuits per foot: 30 Circuit jumper: JN3, 2 circuits Wire size: AWG #6-18 CU Screw size: #10-32 Mounting options: 35mm DIN rail, C-rail Marking tape: MT12-1/2 Torque rating: 35 in/lb max. Operating temperature: 105°C 1.50 (38.10) 1.67 (42.41) 1.45 (36.83) 1.17 (29.71) NDN1 Inches (Millimeters) SPECIFICATIONS Rating: 90A, 600V Center spacing: .635” (16.13) Number of poles: 1 Circuits per foot: 18 Wire size: AWG #2-18 CU Screw size: 1/4-28 Mounting options: 35mm DIN rail, C-rail * Dove-tail option is available for mounting side-by-side. Order part no. NDN1-A. Marking tape: MT12-1/2 Torque rating: 32 in/lb max. Operating temperature: 105°C 1.32 (33.68) 1.71 (43.48) Dovetail Option .59 (14.99) NDN111 1.43 (36.31) Inches (Millimeters) SPECIFICATIONS Rating: 90A, 600V; UL/CSA Center spacing: .635” (16.13) Number of poles: 3 Circuits per foot: 18 Circuit jumper: JN1, 2 circuits Wire size: AWG #2-18 CU Screw size: 1/4-28 Mounting options: 35mm DIN rail, C-rail, Base Mount. * Dove tail option is available for mounting side-by-side. Order part no. NDN111-A. Marking tape: MT12-1/2 Torque rating: 32 in/lb max. Operating temperature: 105°C Mtg. holes .18 (4.57) dia. .28 (7.11) c'bores 1.46 (37.13) 1.71 (43.48) Dovetail Option .62 (15.75) 1.87 (47.50) BIF document: 1402 5 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 1.44 (36.57) Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Rail Mount Terminal Blocks GET CONNECTED WITH US N512 Inches (Millimeters) SPECIFICATIONS Rating: 5A, 600V; UL/CSA 20A, 300V; UL/CSA Center spacing: .197” (5.00) Number of poles: 12 Circuits per foot: 60 Circuit jumper: JN512, 12 circuits Wire size: AWG #12-22 CU Screw size: #4-48 Mounting options: C-rail, 15mm DIN rail Marking tape: AT512 Torque rating: 12 in/lb max. Operating temperature: 105°C 2.40 (60.96) 1.09 (27.68) .88 (22.35) BIF document: 1403 NFT2 Inches (Millimeters) SPECIFICATIONS Rating: 40A, 600V; UL/CSA; 55A Factory Wired Center spacing: .281” (7.13) Number of poles: 2 Circuits per foot: 38 Circuit jumper: JN2, 2 circuits Wire size: AWG #8-22 CU Screw size: #8-32 Mounting options: C-rail Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C .07 (1.78) .60 (15.44) 1.29 (32.94) .93 (23.80) .36 (9.14) 1.68 (42.82) .65 (16.51) 1.23 (31.34) BIF document: 1404 NFT3 Inches (Millimeters) SPECIFICATIONS Rating: 40A, 600V; UL/CSA; 55A Factory Wired Center spacing: .390” (9.91) Number of poles: 3 Circuits per foot: 28 Circuit jumper: JN3, 2 circuits Wire size: AWG #8-22 CU Screw size: #8-32 Mounting options: C-rail Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.18 (29.97) 1.29 (32.94) 1.23 (31.37) BIF document: 1405 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 6 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Rail & Base Mount Terminal Blocks NC3 Inches (Millimeters) 3.12 (79.38) SPECIFICATIONS Rating: 175A, 600V; UL/CSA Center spacing: 1.06” (26.92) Number of poles: 3 Circuits per foot: 11 Wire size: 2/0-#14 CU/AL Screw size: 5/16-24 Mounting options: C-rail, Base Mount Marking tape: MT12-1/2 Torque rating: 45 in/lb max. Operating temperature: 105°C 1.75 (44.45) 1.75 (44.45) 1.25 (31.75) .250 x .190" mtg. slots Optional LS3 Terminal Cover BIF document: 1406 NSE3 Inches (Millimeters) SPECIFICATIONS Rating: 115A, 600V; UL/CSA Center spacing: 1.06” (26.92) Number of poles: 3 Circuits per foot: 11 Circuit jumper: JNSE3, 2 circuits Wire size: For use with wire crimped to ring terminal. Screw size: 1/4-28 Mounting options: C-rail, Base Mount Marking tape: MT12-1/2 Operating temperature: 105°C BIF document: 1407 Optional LS3 Terminal Cover NSS3 1.25 (31.75) .250 x .190 mtg. slots 1.75 (44.45) 1.53 (38.86) 3.12 (79.24) Inches (Millimeters) SPECIFICATIONS Rating: 30A, 600V; UL/CSA Center spacing: .385” (9.77) Number of poles: 3 Circuits per foot: 28 Circuit jumper: JNSS3, 2 circuits Wire size: For use with wire crimped to ring terminal. Screw size: #6-32 Mounting options: C-rail Marking tape: MT12-1/2 Operating temperature: 105°C 1.24 (31.50) BIF document: 1408 7 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 1.25 (31.75) 1.32 (33.73) Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Depluggable Rail Mount Terminal Blocks GET CONNECTED WITH US PLU3 Inches (Millimeters) SPECIFICATIONS Rating: 40A, 600V; UL/CSA Center spacing: .390” (9.91) Number of poles: 3 Circuits per foot: 28 Circuit jumper: JN3, 2 circuits Wire size: AWG #8-22 CU Screw size: #8-32 Mounting options: C-rail, Stackable Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.25 (31.75) .59 (14.98) 1.25 (31.75) 1.79 (45.64) 1.25 (31.75) 1.85 (46.99) BIF document: 1409 PLU1 Series Inches (Millimeters) SPECIFICATIONS Rating: 70A, 600V; UL/CSA Center spacing: .625” (15.88) Number of poles: 1-3 PLU1 (1 pole) PLU11 (2 pole) PLU111 (3 pole) Circuits per foot: 19 Circuit jumper: JN1, 2 circuits Wire size: AWG #4-18 CU Screw size: 1/4-28 Mounting options: C-rail, Stackable Marking tape: MT12-1/2 Torque rating: 32 in/lb max. Operating temperature: 105°C 1.85 (46.99) 1.48 (37.59) 1.87 (47.49) 1.25 (31.75) BIF document: 1410 PSU1 Series SPECIFICATIONS Rating: 45A*, 600V; UL/CSA *45A rating achieved with ring terminal crimped to wire. Center spacing: .625” (15.88) Number of poles: 1-3 PSU1 (1 pole) PSU11 (2 pole) PSU111 (3 pole) Circuits per foot: 19 Wire size: For use with crimp on connectors only. Screw size: #10-32 Mounting options: C-rail, Stackable Marking tape: MT12-1/2 Torque rating: 32 in/lb max. Operating temperature: 105°C Inches (Millimeters) 1.93 (49.12) 1.48 (37.64) .625 (15.88) 2.44 (62.10) .43 (11.10) For complete specification data, call Bussmann Information Fax ~ 314.527.1450 1.30 (33.00) BIF document: 1411 8 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Base Mount Terminal Blocks KT3 Inches (Millimeters) BIF document: 1412 .25 (6.35) 1.22 (31.04) #8 screw clearance KAD end mtg. adapter KAD End Mount Adapter Optional 1.25 (31.75) 1.25 (31.75) 2.34 (59.51) KT4 SPECIFICATIONS Rating: 30A, 600V; UL/CSA Center spacing: .250” (6.35) Number of poles: 4 Circuits per foot: 48 Circuit jumper: JN4, 4 circuits Wire size: AWG #10-22 CU Screw size: #6-32 Mounting options: Base Mount Mounting screws recommended every 12 circuits. Marking tape: MTC6 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.25 (31.75) 1.87 (47.63) SPECIFICATIONS Rating: 40A, 600V; UL/CSA Center spacing: .390” (9.91) Number of poles: 3 Circuits per foot: 28 Circuit jumper: JN3, 2 circuits Wire size: #8-22 CU Screw size: #8-32 Mounting options: Base Mount, Stackable Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C Inches (Millimeters) .98 (24.99) .37 (9.40) .62 (15.88) 1.26 (32.23) 1.34 (34.04) BIF document: 1413 PLK3 SPECIFICATIONS Rating: 40A, 600V; UL Center spacing: .390” (9.91) Number of poles: 3 Circuits per foot: 28 Circuit jumper: JN3, 2 circuits Wire size: AWG #8-22 CU Screw size: #8-32 Mounting options: Base Mount, Stackable; End Piece (Part No. KAD) is required for mounting. Mounting screws recommended every 15 circuits. Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C Inches (Millimeters) 1.46 (37.22) .56 (14.22) 1.79 (45.52) 1.84 (46.86) KAD End Mount Adapter Required BIF document: 1414 9 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Quick Connect Terminal Blocks GET CONNECTED WITH US NTQ23 Inches (Millimeters) SPECIFICATIONS Rating: 40A, 600V Center spacing: .390” (9.91) Number of poles: 3 Circuits per foot: 28 Wire size: AWG #8-22 CU Screw size: #8-32 Mounting options: C-rail Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.31 (33.32) 1.25 (31.75) 1.25 (31.75) 1.25 (31.75) BIF document: 1415 BNQ21 Inches (Millimeters) SPECIFICATIONS Rating: 40A, 600V; UL/CSA Center spacing: .437” (11.10) Number of poles: 1 Circuits per foot: 24 Wire size: AWG #8-22 CU Screw size: #8-32 Quick Connects: .250” x .031” Mounting options: Base Mount., Stackable; End Piece (Part No. BQE) is required for mounting. Mounting screws recommended every 8 circuits. Torque rating: 18 in/lb max. Operating temperature: 105°C #BQE (end mtg. adaptor) BQE End Mounting Adapter Required #8 mtg. screw .56 (14.28) 1.47 (37.33) B 1.41 (35.81) A A B (N+2) x .437 (N+1) x .437 N = Number of circuits BIF document: 1416 BQQ41 Inches (Millimeters) SPECIFICATIONS Rating: 30A, 600V; UL/CSA Center spacing: .437” (11.10) Number of poles: 1 Circuits per foot: 24 Wire size: For use with quick connect terminals only. Quick Connects: .250” x .031” Mounting options: Base Mount, Stackable; End Piece (Part No. BQE) is required for mounting. Mounting screws recommended every 8 circuits. Operating temperature: 105°C BQE End Mounting Adapter Required #BQE (end mtg. adaptor) #8 mtg. screw .56 (14.28) 1.47 (37.33) B 1.41 (35.81) A A B (N+2) x .437 (N+1) x .437 N = Number of circuits For complete specification data, call Bussmann Information Fax ~ 314.527.1450 BIF document: 1417 10 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Rail Mount Fuse Holders NDNF1 Inches (Millimeters) SPECIFICATIONS Rating: 30A, 600V; UL/CSA Number of poles: 1 Fuse size: 13/32” x 1-1/2” BCC recommends BUSS® KTK-R, FNQ-R or equivalent. Circuit jumper: JF1, 2 circuits Wire size: AWG #8-22 CU Mounting options: 35mm DIN rail, C-rail Fuse Pullers: PF1 (standard); *LPF1 (lighted neon or incandescent bulb). Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C 1.93 (49.02) .62 (15.74) .46 (11.68) 2.00 (50.80) 1.25 (31.75) LPF1 Lighted Fuse Puller PF1 Fuse Puller NDND1 non-fused disconnect enables isolation of individual circuits for testing NDNFD1 fused disconnect block NDNLFD1 fused disconnect with visual indicator* for blown fuse SPECIFICATIONS Ratings: NDND1: 30A, 600V; UL/CSA NDNFD1: 15A, 600V; CSA NDNLFD1: 15A, 600V Number of poles: 1 Fuse size: 1/4” x 1-1/4” BCC recommends BUSS® AGC, MDL or equivalent. Circuit jumper: JF1, 2 circuits Wire size: AWG #8-22 CU Mounting options: 35mm DIN rail, C-rail Marking tape: MT12-1/2 Torque rating: 18 in/lb max. Operating temperature: 105°C Inches (Millimeters) 2.31 (58.67) 1.25 (31.75) 2.06 (52.32) .62 (15.74) 2.68 (68.07) *Visual indicator for blown fuse is neon or incandescent bulb, depending on voltage. Specify voltage required. BIF document: 1418 11 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Rail Mount Circuit Breakers GET CONNECTED WITH US UB Series Inches (Millimeters) SPECIFICATIONS Rating: .5 - 15A, 250VAC/65VDC; UL*/CSA/VDE *For 9A - 15A units, UL voltage ratings: 125VAC/65VDC Number of poles: 1 Max. interrupt cap.: 200A, but not over 100 times rated current. Life: 4,000 cyc. 200% rated current; 6,000 cyc. rated current Dielectric strength: 1,500VAC Insulation resist: 100 Megohms Mounting options: 35mm DIN rail, C-rail (Adapter required for C-rail) Weight: 3.2 oz. .45 (11.56) 3.13 (79.60) 2.33 (59.18) 1.37 (35.04) .56 (14.43) UBA-CR (Req'd for C-rail mtg.) Tripping Times in Seconds at 70°F Percent rated current Tripping time 100% no trip 200% 10 - 40 300% 3 - 18 400% 1.5 - 9 500% .8 - 6 600% .003 - 4 1000% .003 - 2 2000% max. .02 For elevated ambient temperatures, find proper current rating of circuit breaker by multiplying actual full load current with these factors. Select closest (higher) amp rating. Temperature Factor 100°F (37.8°C) 1.1 Standard Current Ratings 120°F (48.9°C) 1.2 140°F (60°C) 1.3 160°F (71.1°C) 1.4 Part Numbering System Amps Ohms Amps Ohms 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 8.000 1.900 0.900 0.480 0.320 0.260 0.160 0.130 0.085 0.076 0.064 6.0 6.5 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 0.056 0.035 0.036 0.032 0.022 0.018 0.016 0.016 0.016 0.012 0.012 ■ U■ B ■■■ – ■ U Series Amperage 005 – 150 (.5A – 15A) Notes: Pressure connector is UL/CSA Recognized for field wiring. Contact factory for ratings below 1A. BIF document: 1419 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 12 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Series 15188 Disconnect Terminal Blocks for 35mm DIN Rail Mount SPECIFICATIONS Rating: 30A; 600V* Center spacing: .375” (9.52 mm) Wire Size: AWG #12–16 CU Screw Size: #6-32 zinc plated philslot Number of poles: 3 and 4 pole only Mounting: 35mm DIN Rail Optional End Stop NDNAS (shown on pg 4). Jumpers: 2 through 4-pole available Materials: Molded Base: Black, UL rated 94V-2 thermoplastic. Tin plated copper alloy contacts. Torque rating: 12 in/lb max. Operating temperature: 120°C Approvals: UL E62622; CSA LR15364; CE Pending *60A rating achieved with #10AWG wire crimped to ring terminal; 25A without. Assembly* 3 Pole 4 Pole ORIENTATION Reverse In-Line 15188-3R 15188-4R 15188-3 15188-4 * Includes male and female disconnect terminal block assembly. Photo courtesy of Square D Company. 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) .375 (9.52) .22 (5.58) 1.94 (49.27) REVERSE WIRING DIRECTION 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) 1.94 (49.27) IN-LINE WIRING DIRECTION BIF document: 1420 13 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Next Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Series KU Base Mount Double Row Terminal Blocks GET CONNECTED WITH US SPECIFICATIONS Rating: 60A, 600V* Center Spacing: .625” (15.88 mm) Number of poles: 2 - 12 Wire Size: AWG #6 CU max. Screw Size: #10-32 brass nickel plated Torque Rating: 20 in/lb max. Distance Between Barriers: .437” (11.09 mm) Mounting: Base mount. For 35mm DIN rail mountable, consult factory. Material: Molded base: Black, UL rated 94V-0 thermoplastic. Terminal plating: Nickel over brass. Screws: Nickel plated brass. Operating Temperature: 105°C max. Approvals: UL E62622; CSA LR15364; CE Pending No. of Poles A KU B KUX only A 2 3 4 5 6 7 8 9 10 11 12 2.50 3.12 3.75 4.37 5.00 5.62 6.25 6.87 7.50 8.12 8.75 1.62 2.25 2.87 3.50 4.12 4.75 5.37 6.00 6.62 7.25 7.87 2.00 2.62 3.25 3.87 4.50 5.12 5.75 6.37 7.00 7.62 8.25 Next KUSC4 KU12 B .62 (15.88) 1.50 (38.10) 2.00 (50.80) #10 screw clearance 1.25 (31.75) .43 (11.09) Dimensions in inches. To convert to millimeters, multiply by 25.4. .50 (12.70) *60A rating achieved with #6 copper wire crimped to ring terminal A Part Numbering System Series Poles Screw Options Covers Marking Strip K■ U ■■■ ■ ■■ ■■ ■■ ■■■ 00 - screws shipped bulk W - brass washer head, nickel plated P - Steel screw w/pressure plate zinc plated B - brass washer head, no plating WC - Top cover & 2 end plates MT - Matte finish NU - Numbered 1 to 12, horizontal NUV - Numbered 1 to 12, vertical PT - Marker strip for cover KU KUX KUSC - Standard block 2 to 12 - Short block - Standard w/shorting strap & 4 shorting screws KURL - Standard w/removable link KUXSC - Short block w/shorting strap & 4 shorting screws KUXRL - Short block w/removable link Accessories MTMU## Molded Marking Tape Matte Finish NUM## Molded Marking Tape JU12 Jumper 12 Circuits NUE End Piece for NUC NUC## Cover BIF document: 1421 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 14 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Series TB100 Double Row Terminal Blocks SPECIFICATIONS Rating: UL: 20A, 250V* CSA: 20A; 150V* Center Spacing: .375” (9.52 mm) Wire Size: #14 - 22 AWG CU Screw Size: #6-32 zinc plated philslot screws Torque Rating: Max. torque for #6 screws - 9 in/lb. Distance Between Barriers: .30” (7.62 mm) Mounting: #6 screws Materials: Molded base: Black, UL rated 94V-0 thermoplastic Terminal plating: Tin over brass; Screws: Zinc plated steel finished with a clear chromate and special coating to inhibit rust. Hardware: Tin over brass Operating Temperature: 260°F (130°C) max., -40°F (-40°C) min. Creepage Paths: Terminal-to-terminal .275” (6.99 mm); Terminal-to-mounting surface .300” (7.62 mm). Breakdown Voltage: 3600V rms Approvals: UL E62622; CSA LR15364; IEC Compliance; CE Pending * Max. rating shown; some options may be rated lower - consult factory. TB100 Poles A B Poles A B Poles A B 02 03 04 05 06 07 08 09 10 11 12 13 1.40 1.78 2.16 2.53 2.90 3.28 3.66 4.03 4.40 4.78 5.16 5.53 1.12 1.50 1.88 2.25 2.62 3.00 3.38 3.75 4.12 4.50 4.88 5.25 14 15 16 17 18 19 20 21 22 23 24 25 5.90 6.28 6.66 7.03 7.40 7.78 8.16 8.53 8.90 9.28 9.66 10.03 5.62 6.00 6.38 6.75 7.12 7.50 7.88 8.25 8.62 9.00 9.38 9.75 26 27 28 29 30 31 32 33 34 35 36 10.40 10.78 11.16 11.53 11.90 12.28 12.66 13.03 13.40 13.78 14.16 10.12 10.50 10.88 11.25 11.62 12.00 12.38 12.75 13.12 13.50 13.88 Inches (mm) A .14 (3.50) .14 (3.50) B .88 (22.30) .31 (7.90) .37 (9.50) .17 dia. (4.30) .30 (7.60) .41 (10.40) .25 (6.30) * Dimensions in inches. To convert to millimeters, multiply by 25.4. Part Numbering System Series T■ B■ 1 ■ 0■ 0 ■ - Poles Screw Options Marking Hardware Options ■■ ■■ ■■ ■■■■ 02 to 36 Blank - std. screws 00 - screws shipped bulk B - brass philslot, nickel plated BS - brass Sems philslot, nickel plated SP - steel Sems philslot, zinc plated L1 to L6 - std. marking Marker strips (pg 23) Covers (pg 22) QC1 to QC20 - quick connects BIF document: 1422 15 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next GET CONNECTED WITH US Screw Options B Brass Philslot Nickel Plated BS Brass SEMS Philslot Nickel Plated SP Steel SEMS Philslot Zinc Plated Hardware Options Quick Connects – Assembled Terminals .187” x .020”. Max. current rating 13 Amps. For other orientations,contact factory. QC1 QC2 QC3 QC4 QC5 QC6 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC17 QC18 QC107 QC 45° – QC 45° QC108 QC 45° – QC 90° QC16 QC19 QC7 QC20 Quick Connects – Bulk Min. order per part no. – 100 pieces. QC101 Flat – none QC102 QC 45° – none QC103 QC 90° – none QC104 Flat – Flat QC105 Flat – QC 45° QC106 Flat – QC 90° QC109 QC 90° – QC 90° Jumpers – Bulk .020” thick tin plated brass. Min. order per part no. – 100 pieces. Contact factory for jumper assembly. J101 Flat slip-on OJ2 Slip-on over barrier OJ4 Closed over barrier For complete specification data, call Bussmann Information Fax ~ 314.527.1450 16 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Series TB200 & TB200HB Double Row Terminal Blocks SPECIFICATIONS Rating: TB200 – 20A, 300V* TB200HB – 20A, 600V* Center Spacing: .437” (11.10 mm) Wire Size: #12 - 22 AWG CU Screw Size: #6-32 zinc plated philslot screws Torque Rating: Max. torque for #6 screws - 9 in/lb. Distance Between Barriers: .353” (8.97 mm) Mounting: #6 screws Materials: Molded base: Black, UL rated 94V-0 thermoplastic Terminal plating: Tin over brass; Screws: Zinc plated steel finished with a clear chromate and special coating to inhibit rust Hardware: Tin over brass Operating Temperature: 260°F (130°C) max., -40°F (-40°C) min. Creepage Paths: Terminal-to-terminal .400” (10.16 mm); Terminal-to-mounting surface .375” (9.52 mm) Breakdown Voltage: 4800V rms Approvals: UL E62622; CSA LR15364; IEC Compliance; CE Pending TB200HB TB200 * Max. rating shown; some options may be rated lower - consult factory. TB200 Poles A B Poles A B Poles A B 02 03 04 05 06 07 08 09 10 11 1.63 2.07 2.51 2.94 3.38 3.82 4.25 4.69 5.13 5.57 1.31 1.75 2.18 2.62 3.06 3.50 3.93 4.37 4.81 5.25 12 13 14 15 16 17 18 19 20 21 6.00 6.44 6.87 7.31 7.75 8.19 8.62 9.06 9.50 9.94 5.68 6.12 6.56 7.00 7.43 7.87 8.31 8.75 9.18 9.62 22 23 24 25 26 27 28 29 30 10.37 10.81 11.25 11.68 12.12 12.56 13.00 13.44 13.87 10.06 10.50 10.93 11.37 11.81 12.25 12.68 13.12 13.56 * Dimensions in inches. To convert to millimeters, multiply by 25.4. Inches (mm) A .16 (4.00) .16 (4.00) B 1.12 (28.40) .44 (11.20) .17 dia. (4.30) .43 (11.10) .35 (8.90) .56 (14.20) .31 (7.80) TB200HB A .16 (4.00) .16 (4.00) B .90 1.37 (22.80) (34.80) .44 (11.20) .17 dia. (4.30) .43 (11.10) .35 (8.90) .17 x .22 slots (4.30 x 5.60) .75 (19.00) .33 (8.40) Part Numbering System Series T■ B ■■■ ■ 200 200HB - Poles Screw Options Marking Hardware Options ■■ ■■ ■■ ■■■■ 02 to 30 Blank - std. screws 00 - screws shipped bulk B - brass philslot, nickel plated BS - brass Sems philslot, zinc plated SP - steel Sems philslot, zinc plated L1 to L6 - std. marking Marker strips (pg 23) Covers (pg 22) QC1 to QC20 - quick connects BIF document: 1423 17 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next GET CONNECTED WITH US Screw Options B Brass Philslot Nickel Plated BS Brass SEMS Philslot Zinc Plated SP Steel SEMS Philslot Zinc Plated Hardware Options Quick Connects – Assembled Terminals .250” x .031”. Max. current rating 24 Amps. For other orientations,contact factory. QC1 QC2 QC3 QC4 QC5 QC6 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC17 QC18 QC207 QC 45° – QC 45° QC208 QC 45° – QC 90° QC16 QC19 QC7 QC20 Quick Connects – Bulk Min. order per part no. – 100 pieces. QC201 Flat – none QC202 QC 45° – none QC203 QC 90° – none QC204 Flat – Flat QC205 Flat – QC 45° QC206 Flat – QC 90° QC209 QC 90° – QC 90° Jumpers – Bulk .020” thick tin plated brass. Min. order per part no. – 100 pieces. Contact factory for jumper assembly. J201 Flat slip-on (Not available on TB200HB) OJ3 Slip-on over barrier OJ7 Closed over barrier For complete specification data, call Bussmann Information Fax ~ 314.527.1450 18 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Series TB300 & TB345 Double Row Terminal Blocks SPECIFICATIONS Rating: TB300 – 30A, 600V* TB345 – 45A, 600V* Center Spacing: .562” (14.28 mm). Wire Size: #10 - 22 AWG CU Screw Size: TB300 – #8-32 zinc plated philslot screws TB345 – #10-32 zinc plated philslot screws Torque Rating: Max. torque for #8 screws - 16 in/lb; #10 screws - 20 in/lb. Distance Between Barriers: .412” (10.46 mm) Mounting: #10 screws Material: Molded base: Black, UL rated 94V-0 thermoplastic Terminal plating: Tin over brass; Screws: Zinc plated steel finished with a clear chromate and special coating to inhibit rust Hardware: Tin over brass Operating Temperature: 260°F (130°C) max., -40°F (-40°C) min. Creepage Paths: Terminal-to-terminal .500” (12.70 mm); Terminal-to-mounting surface .450” (11.43 mm) Breakdown Voltage: 7500V rms Approvals: UL E62622; CSA LR15364; IEC Compliance; CE Pending * Max. rating shown; some options may be rated lower - consult factory. TB300 & TB345 Inches (mm) Poles A B Poles 02 03 04 05 06 07 08 09 2.13 2.69 3.25 3.81 4.37 4.94 5.50 6.06 1.69 2.25 2.81 3.37 3.94 4.50 5.06 5.62 10 11 12 13 14 15 16 17 A B 6.62 6.19 7.18 6.75 7.75 7.31 8.31 7.87 8.87 8.44 9.43 9.00 9.99 9.56 10.56 10.12 Poles A B 18 19 20 21 22 23 24 11.12 11.68 12.24 12.80 13.37 13.93 14.49 10.68 11.25 11.81 12.37 12.93 13.50 14.06 * Dimensions in inches. To convert to millimeters, multiply by 25.4. 8-32 binding head screw - TB 300 10-32 binding head screw - TB 345 A .22 (5.60) B .90 1.33 (22.80) (33.80) .50 (12.70) .56 (14.20) .21dia. (5.30) .56 (14.20) .21 x .25 slots (5.30 x 6.30) .41 (10.40) .81 (20.50) .33 (8.40) Part Numbering System Series T■ B ■■■ ■ 300 345 - Poles Screw Options Marking Hardware Options ■■ ■■ ■■ ■■■■ 02 to 24 Blank - std. screws 00 - screws shipped bulk B - brass philslot, nickel plated BS - brass Sems philslot, zinc plated (TB300 only) SP - steel Sems philslot, zinc plated L1 to L6 - std. marking Marker strips (pg 23) Covers (pg 22) QC1 to QC20 - quick connects (TB300 only) BIF document: 1424 19 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next GET CONNECTED WITH US Screw Options B Brass Philslot Nickel Plated BS Brass SEMS Philslot Zinc Plated SP Steel SEMS Philslot Zinc Plated Hardware Options Quick Connects – Assembled *TB300 only. Terminals .250” x .031”. Max. current rating 24 Amps. For other orientations,contact factory. QC1 QC2 QC3 QC4 QC5 QC6 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC7 QC20 Quick Connects – Bulk *TB300 only. Min. order per part no. – 100 pieces. QC201 Flat – none QC202 QC 45° – none QC203 QC 90° – none QC204 Flat – Flat QC205 Flat – QC 45° QC206 Flat – QC 90° QC207 QC 45° – QC 45° QC208 QC 45° – QC 90° QC209 QC 90° – QC 90° Jumpers – Bulk .020” thick tin plated brass. Min. order per part no. – 100 pieces. Contact factory for jumper assembly. J301 Flat slip-on (TB300 only) OJ11 Slip-on over barrier OJ6 Closed over barrier For complete specification data, call Bussmann Information Fax ~ 314.527.1450 20 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Series TB400 Double Row Terminal Blocks SPECIFICATIONS Rating: 75A, 600V* * 30A max. with #10 AWG; 75A max. achieved with #4 AWG wire crimped to ring terminal. Center Spacing: .687” (17.45 mm) Wire Size: #10 - 14 AWG CU Screw Size: #10-32 zinc plated philslot screws Torque Rating: Max. torque for #10 screw - 20 in/lb. Distance Between Barriers: .562” (14.27 mm) Mounting: #10 screws Material: Molded base: Black, UL rated 94V-0 thermoplastic Terminal plating: Tin over brass; Screws: Zinc plated steel finished with a clear chromate and special coating to inhibit rust Operating Temperature: 260°F (130°C) max., -40°F (-40°C) min. Creepage Paths: Terminal-to-terminal .598” (15.19 mm); Terminal-to-mounting surface .542” (13.77 mm) Breakdown Voltage: 7500V rms Approvals: UL E62622; CSA LR15364; IEC Compliance; CE Pending * 75A max acheived with #4 AWG wire crimped to ring terminal; 30A max. with #10 AWG. TB400 Poles 02 03 04 05 A 2.51 3.20 3.89 4.58 B 2.06 2.75 3.44 4.13 Poles 06 07 08 09 A 5.26 5.95 6.64 7.33 B 4.81 5.50 6.19 6.88 Poles 10 11 12 A 8.01 8.70 9.39 Inches (mm) B 7.56 8.25 8.94 A B .22 (5.60) .15 dia. (3.80) .625 .1.12 (15.90) (28.40) * Dimensions in inches. To convert to millimeters, multiply by 25.4. .22 dia. (5.60) .68 (17.40) .68 (17.40) .56 (14.30) 1.81 (46.00) A' .76 (19.30) .46 (11.70) 1.34 (34.00) A' Closed bottom A' - A' Screw Options B Brass Philslot Nickel Plated Part Numbering System Series T■ B■ 4■ 0■ 0 ■ - Poles Screw Options ■■ ■■ 02 to 12 Blank - std. screws 00 - screws shipped bulk B - brass philslot, nickel plated Marking Hardware Options Not available Not available BIF document: 1425 21 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Previous All Series Marking Options & Accessories Double Row Terminal Blocks Next GET CONNECTED WITH US Marking Options Standard markings are applied directly to the side(s) of a block. Standard color is white. Standard height is .125”. 1 2 3 3 2 1 1 2 3 Standard Marking Note: Blocks marked on both sides require a different code for each side. Example Style L1 on one side of the block requires Style L2 on the other side to ensure common terminal marking. To order, add appropriate suffix (L1, L2, L3, L4, L5 and/or L6) to block part number in the proper sequence. L1 L2 L3 1 2 3 1 2 3 3 2 1 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents L4 L5 L6 Note: Not available on TB400 Series Special Marking Special markings are available at an additional charge for preparation. Production charges for setup, handling and marking are the same as for standard marking. Drawing(s) must be submitted to ensure accuracy of part required. Consult factory for price and delivery. Covers Covers prevent personnel, screws and foreign items from contacting live terminals. Available in white or clear plastic. Two cover clips supplied with each cover. Cover width is 1.31 inches. All covers must be ordered separately. Consult factory for special legends. Example: 10 position cover, white, TB100 Series, no legends . . . Part # is X12010. Part Numbering System Series Cover Strip Poles ■ X ■■■ ■■ 120 119 220 219 320 319 - 02 to 36 (TB100) 02 to 30 (TB200/TB200HB) 02 to 24 (TB300/TB345) TB100/white TB100/clear TB200 & TB200HB* - white TB200 & TB200HB* - clear TB300 & TB345 - white TB300 & TB345 - clear Cover Clips – Bulk Part Number DD1 – TB100 Series DD2 – TB200 Series DD2HB – TB200HB Series DD3 – TB300 Series Note: Not available on TB400 Series. * For use on TB200HB, specify HB after Part No. i.e., X21902HB BIF document: 1426 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 22 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Top & Bottom Marking Strips Double Row Terminal Blocks Top Marker Strips Top mounting marker strips are available in white (opaque) plastic. Two cover clips are supplied with each marker strip. All top marker strips must be ordered separately. Consult factory for special legends. Example: 12 position cover, TB200, .032” x .312”, with no legends . . . Part # is X20312. Example: 12 position cover, TB200HB, .060” x .500”, with no legends . . . Part # is X23312HB. Part Numbering System Series ■ X Top Marker Strip Poles ■■■ ■■ 133 103 233 203 333 303 - 02 to 36 (TB100) 02 to 30 (TB200/TB200HB)* 02 to 24 (TB300/TB345) TB100 (.060 thk x .500w) TB100 (.032 thk x .312w) TB200 & TB200HB* (.060 thk x .500w) TB200 & TB200HB* (.032 thk x .312w) TB300 & TB345 (.060 thk x .500w) TB300 & TB345 (.032 thk x .380w) Note: Not available on TB400 Series. * For use on TB200HB, specify HB after Part No. i.e., X23302HB Bottom Marker Strips Bottom mounting marker strips are made of black PVC, .030” thick. Space is available to handle most marking situations. All marker strips must be ordered separately. To order, specify part number, required legends and (BF) bottom forward, (BR) bottom reverse, (TF) top forward, or (TR) top reverse. Consult factory for specials. Example: 13 position strip, TB100 with no legends, space for marking one side . . . Part # is X10513. Space for marking one side Space for marking two sides Position for legends (one side, two sides) can be specified standard. Standard legend height is .125”. Standard legends are 0-99. Special legends are available on special order. Drawing(s) must be submitted to ensure accuracy of part required. Part Numbering System Series ■ X Bottom Marker Strip Poles Orientation ■■■ ■■ ■■ 105 101 205 201 295 291 305 301 - 02 to 36 (TB100) 02 to 30 (TB200/TB200HB) 02 to 24 (TB300/TB345) BF – bottom forward BR – bottom reverse TF – top forward TR – top reverse TB100 – marking one side TB100 – marking both sides TB200 – marking one side TB200 – marking both sides TB200HB – marking one side TB200HB – marking both sides TB300 & TB345 – marking one side TB300 & TB345 – marking both sides Note: Not available on TB400 Series. BIF document: 1427 23 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Next Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Power Blocks Series 11675 & 11725 Next GET CONNECTED WITH US Quick-Connect Power Distribution Blocks Series 11675 SPECIFICATIONS Ratings: 40A, 250V; UL/CSA Poles: 2 to 6 poles with (3) .250” quick-connect terminals per pole. Input wire sizes: #8 – #14 CU Torque rating: 18 in/lb max. Operating temperature: 150°C Design: Screw connections for field wiring. Quick connects reduce cost of internal wiring. Agency approvals: UL E62622; CSA LR15364; CE Pending Inches (Millimeters) .20 (5.08) .56 (14.22) .20 (5.08) I.D. eyelets .50 (12.70) B .20 (5.08) dia. holes 1.37 (34.79) .76 (19.30) C .46 (11.68) A D .37 (9.39) .43 (10.92) 1.03 (26.16) Part Number A B C D 11675-2 11675-3 11675-4 11675-5 11675-6 2.09 2.66 3.22 3.78 4.34 1.68 2.25 2.81 3.37 3.93 .56 1.12 1.68 2.25 2.81 1.15 1.71 2.28 2.84 3.40 11675-4 Series 11725 SPECIFICATIONS Ratings: 70A, 600V; UL/CSA Poles: 2, 3 or 4 poles with (4) .250” quick-connect terminals per pole. Input wire sizes: #2 – #14 CU/#8 AL Torque rating: 45 in/lb max. Operating temperature: 150°C Design: Screw connections for field wiring. Quick connects reduce cost of internal wiring. Agency approvals: UL E62622; CSA LR15364; CE Pending .21 (5.33) .68 (17.27) .19 (4.98) I.D. eyelets .62 (15.74) B .19 (4.98) dia. holes 1.84 (46.73) .90 (22.86) C .56 (14.22) A D .59 (14.98) .43 (10.92) 1.12 (28.44) 11725-2 Part Number A B C D 11725-2 11725-3 11725-4 2.50 3.18 3.87 2.06 2.75 3.43 .68 1.37 2.06 1.37 2.06 2.75 BIF document: 1428 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 24 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Barrier & Dead Front Terminal Blocks Series 14002 & 14004 Barrier Terminal Blocks Inches (Millimeters) Series 14002 A SPECIFICATIONS Ratings: 115A, 600V; UL/CSA Poles: 2 to 6 poles Wire sizes: #2 – #14 CU/#8 AL Operating temperature: 150°C Marking: Marking strip optional, consult factory. Options: CP = Pressure plate, rated 60A, 600V Q = Quick-Connect, rated 50A, 600V To order options, enter letter code in front of Part No.: ie; CP14002-2 Agency approvals: UL E62622; CSA LR15364; CE Pending .87 (22.09) 1.25 (31.75) B .75 (19.05) 1.50 (38.10) .96 (24.38) .37 (9.39) .62 (15.74) .39 (9.90) A* .17 (4.31) dia. holes with .34 (8.63) dia. x .75 (19.05) deep c'bore Part Number A B 14002-2 14002-3 14002-4 14002-5 14002-6 1.75 2.37 3.34 3.96 4.59 – – 1.59 2.21 2.84 Note: “A” dimension for 14002-2 & 14002-3 only. (14002-2 & 14002-3 have only two mounting holes.) 14002-2 Dead Front Terminal Blocks Inches (Millimeters) Series 14004 SPECIFICATIONS Ratings: 90A, 600V; UL/CSA Poles: 2 to 12 poles Wire sizes: #4 – #14 CU/#8AL Operating temperature: 75°C Marking: Marking strip optional, consult factory. Agency approvals: UL E62622; CSA LR15364 .50 (12.70) .65 (16.51) .21 (5.33) dia. holes 1.50 (38.10) .50 (12.70) .18 (4.57) .75 (19.05) B 1.12 (28.44) A 14004-4 Part Number A B 14004-2 14004-3 14004-4 14004-5 14004-6 14004-7 14004-8 14004-9 14004-10 14004-11 14004-12 1.81 2.31 2.81 3.31 3.81 4.31 4.81 5.31 5.81 6.31 6.81 1.43 1.93 2.43 2.93 3.43 3.93 4.93 4.93 5.43 5.93 6.43 BIF document: 1429 25 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Power Blocks GET CONNECTED WITH US Splicer Terminal Blocks Inches (Millimeters) Series 160, 162, 163 & 165 SPECIFICATIONS Ratings: To 620A, 600V; UL/CSA. See table. Materials: Molded material: Black, UL rated 94V-0 thermoplastic Operating Temperature: 150°C Marking: Marker strip is optional, consult factory. Agency approvals: UL E62622 General Industrial Class per UL 1059; CSA LR15364; CE Pending Part Number Line Connection Load Connection *16000 *16003 *16005 16200 16201 16204 16301 16303 16306 16500 16504 2/0-#8CU-AL 250MCM-#6CU 350MCM-#6CU-AL #2-#14CU/#8AL 1/0-#14CU 2/0-#8CU-AL 250MCM-#6CU 350MCM-#6CU-AL 500MCM-#6CU-AL (2) 350MCM-#4CU-AL (2) 500MCM-#6CU-AL 2/0-#8 CU-AL 250MCM-#6CU 350MCM-#6CU-AL #2-#14CU/#8AL 1/0-#14CU 2/0-#8CU-AL 250MCM-#6CU 350MCM-#6CU-AL 500MCM-#6CU-AL (2) 350MCM-#4CU-AL (2) 500MCM-#6CU-AL Connector Material & Agency Ampacity Approvals AL-175A CU-255A AL-310A AL-115A CU-150A AL-175A CU-255A AL-310A AL-380A AL-620A AL-760A UL UL UL UL UL UL UL UL UL UL UL – – – CSA CSA CSA CSA CSA CSA CSA CSA A D B G H F E C E * 160 Series Bases have mounting holes outside the barriers. Other bases (162 through 165) have mounting holes within barriers. See dimensional drawings. J MTG. HOLES .21 x .41 C'BORE .42 x .62 x. 12 DEEP Series 163 (1, 2, & 3-pole available) A .37 (9.39) .21 x .37 slots 1.00 2.00 (50.80) (25.40) .26 dia. holes A 2.75 1.37 (69.85) (33.02) D H B G F B E .50 (12.70) C .68 (17.27) 2.06 (52.32) E Series 160 (2, 3, & 4-pole available) J .20 dia. hole w/ .40 dia. c'bore No. of Poles A B 2 3 4 4.12 5.37 6.62 3.62 4.87 6.12 Series 162 & 165 (1, 2, & 3-pole available) Series A B C 1-pole C 2-pole C 3-pole 162 163 165 2.87 4.00 5.50 2.25 3.37 4.75 1.06 1.96 3.12 1.87 3.58 5.81 2.68 5.20 8.50 Series D E F G H J 162 163 165 1.75 3.32 3.12 .81 1.62 2.68 .53 .97 1.56 .31 .31 .37 .84 .87 1.37 .31 .35 .62 BIF document: 1430 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 26 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Power Blocks Power Distribution Blocks Inches (Millimeters) Series 160, 162, 163 & 165 SPECIFICATIONS Ratings: To 840A, 600V; UL/CSA. See table. Materials: Molded material: Black, UL rated 94V-0 thermoplastic Operating Temperature: 150°C Marking: Marker strip is optional; consult factory. Agency approvals: UL E62622 General Industrial Class per UL 1059; CSA LR15364; CE Pending Part Number *16021 *16023 16220 16321 16323 16325 16330 16332 16335 16370 16371 16372 16373 16375 16376 16377 16528 16530 Line Connection 2/0-#14CU/#8AL 350MCM-#6CU-AL 2/0-#14CU/#8AL 2/0-#14CU-AL 350MCM-#6CU-AL (2) 2/0-#14CU/#8 AL 500MCM-#6CU-AL 350MCM-#6CU-AL Connector Material & Agency Ampacity Approvals Load Connection (6) #4-#14CU/#8AL #4-#14CU/#8AL #4-#14CU/#8AL (6) #4-#14CU/#8AL (6) #4-#14CU/#8AL (6) #4-#14CU/#8AL (6) #2-#14CU/#8AL (3) #2-#14CU/#8AL & (2)1/0-#14CU/#8AL (3) #2-#14CU/#8AL 500MCM-#6CU-AL & (2)1/0-#14CU/#8AL (12) #4-#14CU/#8AL 350MCM-#6CU-AL 350MCM-#6CU-AL (6)#2-#14CU/#8AL (3) 1/0-#14CU/#8AL 350MCM-#6CU-AL (21)#10-#14CU/#10AL 350MCM-#6CU-AL (3)1/0-#14CU/#8AL (14) #10-#14CU/#8AL 600MCM-#2CU-AL (12)#4-#14CU/#8AL (6) 600MCM-#2CU-AL #2-#14CU/#8AL (3) 1/0-#14CU-8AL (12) (2) 300MCM-#2CU-AL #4-#14CU/#8AL (2) (4) 600MCM-#2CU-AL 3/0-#8CU-AL & (4)#4-#14CU/#8AL (2) 500MCM-#6CU-AL (12)#4-#14CU/#8AL (6) (4) AL-175A AL-310A AL-175A AL-175A AL-310A AL-350A AL-380A AL-310A UL UL UL UL UL UL UL UL CSA CSA CSA CSA CSA CSA CSA CSA AL-380A AL-310A AL-310A UL UL UL UL CSA – CSA CSA AL-310A AL-310A UL UL CSA CSA AL-420A AL-420A UL UL CSA CSA AL-570A AL-840A UL UL – CSA AL-760A UL CSA A .37 (9.39) D F E C E J MTG. HOLES .21 x .41 C'BORE .42 x .62 x. 12 DEEP Series 163 (1, 2, & 3-pole available) * 160 Series Bases have mounting holes outside the barriers. Other bases (162 through 165) have mounting holes within barriers. See dimensional drawings. 2.00 (50.80) G B A B G D H A F .21 x .37 slots E 1.00 (25.40) C 2.75 1.37 (69.85) (33.02) .26 dia. holes E B 20. dia. hole w/ .40 dia. c'bore .50 (12.70) .68 (17.27) 2.06 (52.32) Series 160 (2, 3, & 4-pole available) No. of Poles 2 3 4 A 4.12 5.37 6.62 J Series 162 & 165 (1, 2, & 3-pole available) Series A B C 1-pole C 2-pole C 3-pole 162 163 165 2.87 4.00 5.50 2.25 3.37 4.75 1.06 1.96 3.12 1.87 3.58 5.81 2.68 5.20 8.50 B Series D E F G H J 3.62 4.87 6.12 162 163 165 1.75 3.32 3.12 .81 1.62 2.68 .53 .97 1.56 .31 .31 .37 .84 .87 1.37 .31 .35 .62 BIF document: 1431 27 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Power Blocks GET CONNECTED WITH US Connector/Stud Power Distribution Blocks Inches (Millimeters) Series 162, 163 & 165 SPECIFICATIONS Ratings: To 760A, 600V; UL/CSA. See table. Materials: Molded material: Black, UL rated 94V-0 thermoplastic Operating Temperature: 150°C Agency approvals: UL E62622 General Industrial Class per UL 1059. CSA LR15364; CE Pending. A D B G H F E C E Part Line Number Connection Connector to Stud 16280 2/0-#14CU/#8AL 16281 2/0-#14CU/#8AL 16378 500MCM-#6CU-AL 16383 500MCM-#6CU-AL 16582 (2)500MCM-#6CU-AL Stud to Stud 16390 3/8-16x11/8 Stud 16394 1/2-13x11/16 Stud 16395 3/8-16x17/16 Stud 16591 3/8-16x17/16 Stud 16593 1/2-13x1 Stud Load Connection 1/4-20x1/2 Stud 1/4-20 Tapped hole (2) 1/4-20x1 Stud (1) 3/8-16x11/4 Stud (2) 3/8-16x15/8 Stud Connector Material & Agency Ampacity Approvals AL-175A AL-175A AL-380A AL-380A AL-760A UL UL UL UL UL Series 163 (1, 2, & 3-pole available) CSA CSA CSA CSA CSA A CU-250A CU-400A CU-310A CU-400A CU-600A UL UL UL UL UL D H B G 3/8-16x11/8 Stud 1/2-13x11/16 Stud (2) 1/4-20x9/16 Stud (2) 3/8-16x17/16 Stud 1/2-13x1 Stud J MTG. HOLES .21 x .41 C'BORE .42 x .62 x. 12 DEEP CSA CSA CSA – CSA F E C E New Option Available on 163 Series Power Blocks PROTECTIVE COVER TO GUARD AGAINST ACCIDENTAL CONTACT • Clear with write on surface for field termination identification. • Available in 1, 2, & 3 poles. Series 162 & 165 (1, 2, & 3-pole available) SUPPLIED WITH (4) #4 THREAD-CUTTING SCREWS ASSEMBLED AS SHOWN 4.14 J .20 dia. hole w/ .40 dia. c'bore Series A B C 1-pole C 2-pole C 3-pole 162 163 165 2.87 4.00 5.50 2.25 3.37 4.75 1.06 1.96 3.12 1.87 3.58 5.81 2.68 5.20 8.50 Series D E F G H J 162 163 165 1.75 3.32 3.12 .81 1.62 2.68 .53 .97 1.56 .31 .31 .37 .84 .87 1.37 .31 .35 .62 TEXTURED SURFACE ® BUSS CPDB CPDB-1=2.10" CPDB-2=3.72" CPDB-3=5.34" BIF document: 1432 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 28 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Power Blocks Series EN Series EN 1.78” Centers Inches (Millimeters) SPECIFICATIONS Ratings: 285A, 600V; UL/CSA Line connector: #300MCM-#6 CU/AL Load connection: (6)#6-#14 CU/#8 AL Material: Molded material; Black, UL rated 94V2 thermoplastic Operating temperature: 125°C Agency approvals: UL E62622; CSA LR15364; CE Pending 1.68 (42.67) A .50 (12.70) Series A B EN61 EN62 EN63 1.38 3.15 4.93 1.78 3.62 5.37 .20 x .37 mtg. slot 2.12 (53.84) B BIF document: 1433 29 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Next Wire Management Products GET CONNECTED WITH US Photo Control Receptacle Series ■ 3-pole, 3-wire receptacles for plug-in, locking type photo controls used in outdoor areas and roadway lighting. ■ Receptacle configuration, terminals and limiting dimensions are in accordance with Figure 3 of EE Pub. No. TDJ-146, NEMA Pub. No. SH 16-1962 and UL 773. ■ Wire types and sizes ranging from #12 AWG through 16 AWG rated at 600V with temperature ratings from 105° to 200°C. ■ Hook-up wires are an integral part of the assembly with lengths furnsihed to customer specification. ■ Available with .250 quick-connect terminals in lieu of wire leads (13661-Q). ■ UL recognized under file E65288 for a rating of 1 KW or 1800VA for potentials up to 480V. ■ CSA certified under file LR21295 for 15 amps at 125V. ■ CE Pending. .14 DIA. W/.28 DIA. x 80° C'SINK (2 HOLES) MODEL 13661 1.56 1.45 2.56 MODEL 13661-Q .62 A 1.37 BLACK (B) RED (R) 1.93 1.37 1.37 1.37 DIA. .96 WHITE (COM) "Z" (WIRE LENGTH IN INCHES) A Part Numbering System Series 1 ■ 3■ 6■ 6■ 1 ■ ASS’Y NO. 13661-W1XX 13661-W2XX 13661-W3XX 13661-W4XX 13661-W5XX - Terminal Type Wire Type Wire Gauge Wire Length ■ ■ ■ ■ See Table Dimension “Z” W = Wire See Table Q = Quick Connect TABLE I (WIRE TYPE) WIRE DESCRIPTION Min. of 26 Strands, Copper Conductor, 125ºC-600V Crosslinked Polyethylene. Min. of 26 Strands, Copper Conductor, Silicone Rubber Insulation And Fiber Glass Braid Jacket, Nec. Type SFF-2(150ºC) Min. Of 26 Strands, Copper Conductor, Type TW, 105ºC-600V Insulation (16 gauge only). Min. of 7 Strands, Copper Conductor Of .0192 Silicone Rubber Insulation And Fiber Glass Braid Jacket, Nec. Type SF-2 (200ºC) Min. Of 19 Strands, Copper Conductor, Type AWM. 105ºC-600V Insulation. TABLE II (WIRE GAUGE) ASS’Y NO. GAUGE 13661-WX2X 12 Gauge 13661-WX4X 14 Gauge 13661-WX6X 16 Gauge BIF document: 1434 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 30 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Disconnect Blocks Nonfused, Disconnects ■ Ratings: 60A, 240V ■ Wire Range: #2-14 CU/#8 AL ■ Available in both 2 and 3 pole versions for both single and three phase systems. ■ Compact, one-piece thermoplastic housing is rated to 150°C. ■ Box connector or quick-connect terminations available on load side. Box connector standard on line side. ■ Body of disconnect can be mounted enabling disconnect head (pull-out) to interlock with door to insure power is off when door is open. ■ UL E120756; CSA LR 37129; CE Pending. Part Numbering System Series - Poles N■ D■ -■ 1 ■ 2■ 6■ 0 ■ ■ 2 3 Line Side Connections Load Side Connections Options ■ ■ ■ C = Box Connection C = Box Connection Q = (4) .250" QuickConnects H = Wire Handle 3.62 2.50 2.50 L0AD SIDE 1.25 LOAD SIDE 1.25 1.28 .62 .12 1.00 .62 1.25 1.93 2.03 3.18 3.28 LINE SIDE LINE SIDE 1.43 2.25 WIRE HANDLE OPTIONAL WIRE HANDLE OPTIONAL .06 2.96 2.15 .06 MALE DISCONNECT SHOWN INSTALLED .18 2.96 2.25 .54 .54 .20 .40 .25 .20 .40 .25 1.25 .62 1.06 1.70 1.031 2.06 1.06 .20 DIA. (2 HOLES) 1.70 1.67 3.34 .20 DIA. (4 HOLES) BIF document: 1435 31 For complete specification data, call Bussmann Information Fax ~ 314.527.1450 Next Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com Contents Previous Look for other reliable products in these comprehensive catalogs . . . Circuit Protection Products for the DC mobile and AC supplementary circuit protection requirements including Shortstop®, Flat-Pak® and Hi-Amp™ auto, manual or modified reset and switchable circuit protectors, Maxi™ ATC®, ATM® blade type circuit protectors, Stud Type Junction Blocks, Small Dimension Fuse Panels, Battery Disconnect Switches and Power Distribution Modules. MAGNUM® Terminal Blocks A complete line of conventional terminal blocks in an easy-to-use catalog. Includes Single Row, Double Row, Depluggable and Edge Connectors, Interface Systems and accessories. Popular center spacings include .250", .325", .375", .437", .562" and .687" with the industry’s most comprehensive range of options. MAGNUM® Euro-Mag Terminal Blocks MAGNUM® has just expanded it’s product line to include European style PCB terminal blocks. These blocks are available in sizes ranging from 3.81mm to 10.16mm centers. Configurations include single, two-tier, depluggable and screwless. All blocks have full agency approvals and are available in horizontal, vertical, and 45º wire orientations. MAGNUM ® GET CONNECTED WITH US BUSSMANN CIRCUIT COMPONENTS • 7300 W. Wilson Ave. • Chicago, IL 60656-4708 • Fax: 800-832-9873 • Phone: 888-YES MAGNUM Website: http://www.busscc.com An ISO 9001 Quality System Certified Facility FORM NO. MEP1/15M/1097
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 1999:05:17 00:46:04Z Modify Date : 2002:08:08 14:29:07-07:00 Page Count : 33 Has XFA : No Page Mode : UseOutlines Creation Date : 1999:05:17 00:46:04Z Producer : Acrobat Distiller 4.0 for Windows Mod Date : 2002:08:08 14:29:07-07:00 Metadata Date : 2002:08:08 14:29:07-07:00EXIF Metadata provided by EXIF.tools