2017 Washlet Fit Chart
2017-10-21
: Pdf 2017 Washlet Fit Chart 2017_Washlet_Fit_Chart toto
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
FIT CHART www.totousa.com INSTALLING A WASHLET® IS MUCH LIKE CHANGING A TOILET SEAT, BUT THE FEATURES AND BENEFITS FAR EXCEED ANY TOILET YOU EVER OWNED. 1 2 WASHLET® FIT CHART BROCHURE WASHLET® COMPARISON CHART S350e S300e C200 C100 A200 A100 SW583 (round) SW573 (round) SW2043 (round) SW2033 (round) SW584 (elongated) SW574 (elongated) SW2044 (elongated) SW2034 (elongated) SW2024 (elongated) SW2014 (elongated) COTTON (#01) $ 1,560 $ 1404 $ 699 $ 599 SEDONA BEIGE (#12) $ 1,794 $ 1,616 $ 804 $ 689 $ 599 $ 499 MSRP REAR CLEANSE SOFT REAR CLEANSE FRONT CLEANSE WIDE FRONT CLEANSE OSCILLATING CLEANSE PULSATING CLEANSE INSTANTANEOUS WATER HEATING CLEANSE WATER PRESSURE CONTROL 5 SETTINGS 5 SETTINGS 5 SETTINGS 5 SETTINGS 5 SETTINGS 5 SETTINGS WATER TEMPERATURE CONTROL 5 SETTINGS 5 SETTINGS 5 SETTINGS 3 SETTINGS 3 SETTINGS 3 SETTINGS WAND POSITION ADJUSTMENT AIR PURIFIER (DEODORIZER) AIR DRYER AIR TEMPERATURE CONTROL 5 SETTINGS 5 SETTINGS 5 SETTINGS 3 SETTINGS HEATED SEAT HEATED SEAT TEMPERATURE CONTROL SoftClose SEAT AND LID 5 SETTINGS 5 SETTINGS 5 SETTINGS 3 SETTINGS 5 SETTINGS 3 SETTINGS SEAT SENSOR AUTOMATIC OPEN AND CLOSE LID SIDE PANEL SIDE PANEL AIR SEAT SENSOR AUTOMATIC FLUSH REMOTE CONTROL NIGHT LIGHT REMOTE CONTROL REMOTE CONTROLLED SEAT REMOTE CONTROLLED FLUSH HYGIENE REMOVABLE LID PREMIST™ EWATER+ WAND CLEANING MODE ENERGY SAVING SELF-CLEANING WAND ENERGY-SAVER TIMER 3, 6, 9 HOURS 3, 6, 9 HOURS AUTO ENERGY SAVER 835W 835W 406W 313W 406W 406W 3.9 ft. (1.2 m) 3.9 ft. (1.2 m) 3.9 ft. (1.2 m) 3.9 ft. (1.2 m) 3.9 ft. (1.2 m) 3.9 ft. (1.2 m) RATED POWER USAGE LENGTH OF POWER CORD WASHLET NOZZLE FLOW RATE REAR 9.1 ~ 14.5 oz. / min. 9.1 ~ 14.5 oz. / min. 9.8 ~ 20.3 oz. / min. 9.8 ~ 20.3 oz. / min. 9.1 ~ 14.5 oz. / min. 9.1 ~ 14.5 oz. / min. SOFT 10.8 ~ 14.5 oz. / min. 10.8 ~ 14.5 oz. / min. 9.8 ~ 18.6 oz. / min. 9.8 ~ 18.6 oz. / min. 9.1 ~ 14.5 oz. / min. 9.1 ~ 14.5 oz. / min. FRONT 9.8 ~ 14.5 oz. / min. 9.8 ~ 14.5 oz. / min. 9.1 ~ 20.3 oz. / min. 9.1 ~ 18.6 oz. / min. 9.8 ~ 14.5 oz. / min. 9.8 ~ 14.5 oz. / min. WATER TEMPERATURE DRYER AIR TEMPERATURE 86°F ~ 104°F 86°F ~ 104°F 86°F ~ 104°F 95°F ~ 104°F 95°F ~ 104°F 95°F ~ 104°F - 95°F ~ 140°F 95°F ~ 140°F 104°F ~ 140°F - - 10.24 ft3 / min. 10.24 ft3 / min. 9.54 ft3 / min. - - - 82° F - 97° F 82° F - 97° F 82° F - 97° F 82° F - 95° F 82° F - 97° F 82° F - 97° F WATER SUPPLY PRESSURE 7 psi - 109 psi 7 psi - 109 psi 7 psi - 109 psi 7 psi - 109 psi 7 psi - 109 psi 7 psi - 109 psi WATER SUPPLY TEMPERATURE 33˚F to 95˚F 33˚F to 95˚F 33˚F to 95˚F 33˚F to 95˚F 33˚F to 95˚F 33˚F to 95˚F 33°F to 104°F 33°F to 104°F 33°F to 104°F 33°F to 104°F 33°F to 104°F 33°F to 104°F 15-5/16"W x 187/8D x 3-15/16"H 15-5/16"W x 20-3/4”D x 3-15/16"H 15-5/16"W x 187/8D x 3-15/16"H 15-5/16"W x 20-3/4”D x 3-15/16"H - - 15 15/16"W x 20.5"D x 6-3/4"H 18-7/8"W x 20.5"D x 6-3/4"H 15-3/8”W x 187/8”D x 7-3/8”H 18-7/8”W x 18-7/8”D x 7-3/8”H AIR VOLUME HEATED SEAT SURFACE TEMPERATURE AMBIENT TEMPERATURE SIZE ROUND ELONGATED 15-3/8”W x 18-7/8”W x 20-7/8”D x 7-3/8”H 20-7/8”D x 7-3/8”H www.totousa.com WASHLET® COMPATIBILITY CHART SIZE NAME S300e/ S350 C100/C200 A100/A200 AIMES ® AQUIA® CAROLINA® II CARLYLE® II / II 1G® GUINEVERE® ONE- PIECE TOILETS ELONGATED LEGATO® LLOYD® PROMENADE® II / II 1G SOIREE® SUPREME® SUPREME II ULTIMATE® ULTRAMAX® ULTRAMAX® II / II 1G ROUND SUPREME ULTIMATE ULTRAMAX AQUIA I / II* CONNELLY® CLAYTON® DARTMOUTH® TWO- PIECE TOILETS ELONGATED DRAKE II / II 1G DRAKE® MARIS® * NEXUS® PROMENADE I / II PROMENADE ROWAN® VESPIN® II / II 1G WHITNEY® ROUND DRAKE PROMENADE ROWAN WALL-HUNG TOILETS * Extension kit THU9090R required AQUIA MARIS SW554/SW574/SW584 elongated SW2034/SW2044 elongated SW553/SW573/SW583 round SW2033/SW2043 round SW2014/SW2024 elongated 3 4 WASHLET® FIT CHART BROCHURE WAS HLET ® S 3 0 0e/S35 0e F i t C h ar t WASHLET S350e/s300e FIT CHART WASHLET S350e; PROMENADE® II 1G® ONE-PIECE TOILET www.totousa.com WHAT IF MY TOILET ISN’T A TOTO TOILET? WILL THE WASHLET STILL FIT? On a standard Toilet with no curves between the seat and tank, all you need is 1-3/4 inches of room past the mounting bolts. POWER CORD 3.9 FT. POWER CORD 3.9 FT. FRONT OF TANK CENTER OF HOLE 1-3/4” (45 mm) min CENTER OF HOLE FRONT OF TANK CENTER OF HOLE 1-3/4” (45 mm) min CENTER OF HOLE CENTER LEFT TO RIGHT SEAT MOUNTING BOLT HOLES 5-1/2” (140 mm) 18-1/2” (470 mm) CENTER LEFT TO RIGHT SEAT MOUNTING BOLT HOLES 5-1/2” (140 mm) LIP OF BOWL 16-1/2” (420 mm) LIP OF BOWL ELONGATED BOWL ROUND BOWL SW584 SW583 SW574 SW573 2-3/16” (55 mm) SEAT MOUNTING HOLE GFCI OUTLET REQUIRED Power cord 3.9 feet. Surge protector recommended WASHLET requires a minimum distance of 1-3/4” (45 mm) between the center of the mounting holes and the front most face of the tank. As long as the toilet corresponds with the above measurements, the WASHLET will fit. NOTE: Some styles of toilets may not allow the Washlet S300e/S350e to be installed due to certain contours near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not allow enough open space to accommodate the minimum width of 9 inches. DIMENSIONS DIMENSION REQUIREMENTS A Elongated - Approximately 18-1/2 inches (470 mm) from seat mounting holes to front of bowl Round - Approximately 16-1/2 inches (420 mm) from seat mounting holes to front of bowl B Minimum of 1-3/4 inches (45 mm) from front most face of tank to the center of mounting bolt holes C Approximately 5-1/2 inches (140 mm) from center left to right seat mounting holes D Minimum 8 inches (203 mm) of open space from center of Washlet S300e/S350e (or toilet to edge of Washlet S300e/S350e and flat bowl surface) 5 6 WASHLET® FIT CHART BROCHURE WASHLET C200/A200 FIT CHART WASHLET C200; ULTRAMAX® II 1G® ONE-PIECE TOILET WASHLET C200; ULTRAMAX® II 1G® ONE-PIECE TOILET www.totousa.com WHAT IF MY TOILET ISN’T A TOTO TOILET? WILL THE WASHLET STILL FIT? On a standard Toilet with no curves between the seat and tank, all you need is 2 inches of room past the mounting bolts. POWER CORD 3.9 FT. POWER CORD 3.9 FT. FRONT OF TANK CENTER OF HOLE 2” (50 mm) min CENTER OF HOLE FRONT OF TANK CENTER OF HOLE 2” (50 mm) min CENTER OF HOLE CENTER LEFT TO RIGHT SEAT MOUNTING BOLT HOLES 5-1/2” (140 mm) 18-1/2” (470 mm) CENTER LEFT TO RIGHT SEAT MOUNTING BOLT HOLES 5-1/2” (140 mm) 16-1/2” (420 mm) LIP OF BOWL LIP OF BOWL ELONGATED BOWL ROUND BOWL SW2044 (C200) SW2024 (A200) SW2043 (C200) GFCI OUTLET REQUIRED Power cord 3.9 feet. Surge protector recommended WASHLET requires a minimum distance of 2” (50 mm) between the center of the mounting holes and the front most face of the tank. As long as the toilet corresponds with the above measurements, the WASHLET will fit. NOTE: Some styles of toilets may not allow the Washlet C200/A200 to be installed due to certain contours near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not allow enough open space to accommodate the minimum width of 9 inches. DIMENSIONS DIMENSION REQUIREMENTS A Elongated - Approximately 18-1/2 inches (470 mm) from seat mounting holes to front of bowl Round - Approximately 16-1/2 inches (420 mm) from seat mounting holes to front of bowl B Minimum of 2 inches (50 mm) from front most face of tank to the center of mounting bolt holes C Approximately 5-1/2 inches (140 mm) from center left to right seat mounting holes D Minimum 9 inches (210 mm) of open space from center of Washlet C200 (or toilet to edge of Washlet C200/A200 and flat bowl surface. 7 8 WASHLET® FIT CHART BROCHURE WASHLET C100/A100 FIT CHART WASHLET C100; DRAKE® II 1G® ONE-PIECE TOILET www.totousa.com WHAT IF MY TOILET ISN’T A TOTO TOILET? WILL THE WASHLET STILL FIT? On a standard Toilet with no curves between the seat and tank, all you need is 2 inches of room past the mounting bolts. POWER CORD 3.9 FT. POWER CORD 3.9 FT. FRONT OF TANK CENTER OF HOLE 2” (50 mm) min CENTER OF HOLE FRONT OF TANK CENTER OF HOLE 2” (50 mm) min CENTER OF HOLE CENTER LEFT TO RIGHT SEAT MOUNTING BOLT HOLES 5-1/2” (140 mm) 18-1/2” (470 mm) CENTER LEFT TO RIGHT SEAT MOUNTING BOLT HOLES 5-1/2” (140 mm) 16-1/2” (420 mm) LIP OF BOWL LIP OF BOWL ELONGATED BOWL ROUND BOWL SW2034 (C100) SW2014 (A100) SW2033 (C100) GFCI OUTLET REQUIRED Power cord 3.9 feet. Surge protector recommended WASHLET requires a minimum distance of 2” (50 mm) between the center of the mounting holes and the front most face of the tank. As long as the toilet corresponds with the above measurements, the WASHLET will fit. NOTE: Some styles of toilets may not allow the Washlet C100/A100 to be installed due to certain contours near the tank and bowl area (see figures below). In the figure on the left side below, dimension D does not allow enough open space to accommodate the minimum width of 11 inches. DIMENSIONS DIMENSION REQUIREMENTS A Elongated - Approximately 18-1/2 inches (470 mm) from seat mounting holes to front of bowl Round - Approximately 16-1/2 inches (420 mm) from seat mounting holes to front of bowl B Minimum of 2 inches (50 mm) from front most face of tank to the center of mounting bolt holes C Approximately 5-1/2 inches (140 mm) from center left to right seat mounting holes D Minimum 11 inches (277 mm) of open space from center of Washlet C100/A100 to left side E Maximum 8-3/8 inches (213 mm) from center to edge of bowl surface 9 TOTO USA, INC. 1155 SOUTHERN ROAD MORROW, GA 30260 800-350-8686 www.totousa.com www.washlet.com #KO-032017-WFB
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Instance ID : uuid:d7cdaac5-fb0b-264b-852c-0903617085da Original Document ID : adobe:docid:indd:aef4670f-acbe-11dd-b695-cb50477b31ab Document ID : xmp.id:f96f11c1-44fb-45dd-ae4f-54c61b8d9ef3 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:6766fd1d-72a8-4ed9-bb2f-d5ac70cd5e48 Derived From Document ID : xmp.did:a26346d6-a31e-450f-99f5-8cd2c9745c07 Derived From Original Document ID: adobe:docid:indd:aef4670f-acbe-11dd-b695-cb50477b31ab Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:07:19 11:02:26-04:00 Create Date : 2017:07:19 11:02:26-04:00 Modify Date : 2017:07:19 11:02:34-04:00 Metadata Date : 2017:07:19 11:02:34-04:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 12 Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools