Keypad Display VW3A58101U For ALTIVAR® 58 Adjustable Speed Drive Controllers
2014-10-17
: Pdf 479686-Attachment 479686-Attachment 785901 Batch10 unilog
Open the PDF directly: View PDF
Page Count: 98
- Chapter 1—Overview
- Chapter 2—Menus
- Language Menu
- Macro-Configuration Menu
- Customizing the Configuration
- Drive Controller Identification Screen
- Increasing the Power Rating for Variable Torque Applications
- 1—Display Menu
- 2—Adjust Menu
- Additional Adjustment Parameters for Material Handling
- Additional Adjustment Parameters for General Use
- Additional Adjustment Parameters for Variable Torque
- Additional Adjustment Parameters After I/O Reassignment
- 3—Drive Menu
- Parallel and Special Motor Applications
- 4—Control Menu
- 5—I/O Menu
- Function Compatibility
- Using The Logic Inputs
- Run Forward and Run Reverse
- 2-wire Control
- 3-wire Control
- Ramp Switching
- Jog
- +Speed/-Speed
- Preset Speeds
- Reference Switching (Auto/Manual)
- Freewheel Stop (Coast to Stop) / Run Permissive
- DC Injection Braking
- Fast Stop
- Motor Switching
- Second Torque Limit
- Fault Reset
- Force to Local
- Auto-tuning
- Encoder Inputs
- Speed regulation
- Summing speed reference
- Using The Analog Inputs
- Speed Reference Summing
- PI Regulator
- Assignment of AI2 and AI3
- Using the Controller Relay and Logic Outputs
- Output Contactor Command (OCC)
- Drive running (RUN)
- Frequency Threshold Attained (FTA)
- Frequency Reference Attained (SRA)
- High Speed Attained (FLA)
- Current Threshold Attained (CTA)
- Thermal State Attained (TSA)
- Brake Logic Command (BLC) (This parameter is assignable to R2)
- Using the Analog Outputs on the I/O Extension Cards
- Motor Current
- Output Frequency
- Ramp Output
- Motor Torque
- Signed Motor Torque
- 6—Fault Menu
- 7—FileS Menu
- Reinitializing the Drive Controller
- File Operation
- Access Code
- Communication Menu
- Application Menu
- Chapter 3—Diagnostics and Troubleshooting
- Keypad Display and Indicating LEDs
- Fault Storage
- using fault codes and messages to solve problems
- MAINTENANCE
- PRECAUTIONS
- Procedure 1: Bus Voltage Measurement
- Procedure 2: Checking Supply Voltage
- Procedure 3: Checking the Peripheral Equipment
- Fault Codes and Messages
- MENU OVERVIEW
- APPENDIX B—Options and ACCESSORIES