646385 Catalog

2014-09-04

: Pdf 646385-Catalog 646385-Catalog 622454 Batch7 unilog

Open the PDF directly: View PDF PDF.
Page Count: 49

Download646385-Catalog
Open PDF In BrowserView PDF
Pocket Pro
w w w. i p ex e l e c t r i c a l . c o m
E L E C T R I C A L

S Y S T E M S

®

TM

TM

Trenchless Raceways Systems

®

®

®

®
®

®

UL Underwriters Laboratories Inc.
(UL 50 and UL 508)

1

Indoor use primarily to provide protection
against contact with the enclosed equipment
and against a limited amount of falling dirt.

2

Indoor use to provide a degree of protection
against limited amounts of falling water and dirt.

3

Outdoor use to provide a degree of protection
against windblown rain; undamaged by the
formation of ice on the enclosure.

4

Either indoor or outdoor use to provide a
degree of protection against falling rain,
splashing water, and hose-directed water;
undamaged by the formation of ice on the
enclosure.

4X

Either indoor or outdoor use to provide a
degree of protection against falling rain,
splashing water, and hose-directed water;
undamaged by the formation of ice on the
enclosure; resists corrosion.

6P

Indoor or outdoor use primarily to provide a
degree of protection against hose-directed
water, the entry of water during prolonged
submersion at a limited depth, and be
undamaged by the formation of ice on the
enclosure.

12

Indoor use to provide a degree of protection
against dust, dirt, fiber flyings, dripping water,
and external condensation of noncorrosive
liquids.

13

Indoor use to provide a degree of protection
and spraying of water, oil, and noncorrosive
liquids.

1

Type
Designation

2
3
4
5
6

This material is reproduced with permission from
Underwriters Laboratories Inc. Standard for Safety
for Cabinets and Boxes, UL 50, Copyright 1988
and Industrial Control Equipment, UL 508, Copyright
1994 by Underwriters Laboratories Inc.

7

Underwriters Laboratories Inc. (UL) shall not be
responsible to anyone for the use of or reliance
upon a UL Standard by anyone. UL shall not incur
any obligation or liability for damages, including
consequential damages, arising out of or in
connection with the use, interpretation of, or reliance
upon a UL Standard.

8

TABLE OF CONTENTS

Applications . . . . . . . . . . . . . . . . . . . . . . . . . .3
Advantages . . . . . . . . . . . . . . . . . . . . . . . . . .4

SCEPTER PVC CONDUIT

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .2

1

Scepter® Rigid PVC Conduit . . . . . . . . . . . . . . .7
Expansion and Contraction . . . . . . . . . . . . . . . . . . .10
Conduit Dimensions . . . . . . . . . . . . . . . . . . . . . . . .15

Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Weatherproof Covers . . . . . . . . . . . . . . . . . . . . . . . .34

CONDUIT REPAIR KIT

Scepter® PVC Conduit Fittings . . . . . . . . . . . .17

SCEPTER PVC
FITTINGS

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Conduit Repair Kit . . . . . . . . . . . . . . . . . . . .43
EPR Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

SCEPTALIGHT

Conduit Cements & Primers . . . . . . . . . . . . . . . . . .42

EPR Kit Adapters . . . . . . . . . . . . . . . . . . . . . . . . . .43

Cor-Line® ENT & Kwikon® Fittings . . . . . . . . . .53

CORLINE ENT &
KIWKON FITTINGS

SceptalightTM: Nonmetallic Light Fixtures . . . .45

Cor-Line Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Kwikon Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Kwikon Accessories . . . . . . . . . . . . . . . . . . . . . . . .61

SUPERDUCT

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Super Duct® . . . . . . . . . . . . . . . . . . . . . . . . . .63
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

SCEPTACON

Advantages/Engineering Data . . . . . . . . . . . . . . . . .64

Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Vertical-Lok Spacers . . . . . . . . . . . . . . . . . . . . . . . .76

SceptaConTM Trenchless Raceway Systems . . .79
Kwikpath® Communication Raceway Systems . .81

KWIKPATH

Monobloc® Spacers . . . . . . . . . . . . . . . . . . . . . . . .77

2

APPLICATIONS

INTRODUCTION

Engineers, electricians, contractors, specifiers and utilities have
realized for many years the advantages of PVC. Today, IPEX electrical
systems include Scepter® PVC conduit and fittings, Super Duct® power
and communication ducts, Cor-Line® ENT, Kwikon® ENT fittings and
FiberTel® high density polyethylene innerduct. These brands are the
number-one choice for power, communication and data needs.
Whether exposed, concealed in walls, encased in concrete, or directly
buried, IPEX electrical products are preferred For The Long Run.
Only when you specify IPEX branded products by name are you
guaranteed our commitment to excellence.

Applications
Typical industrial/commercial and residential applications for IPEX
electrical systems include:
• Utilities
• Cable
• Communications
• Street and highway lighting
• Residential applications
Pocket Pro provides the most comprehensive information about PVC
systems – from basic raw material to installation characteristics of the
finished product. Written with the engineer, contractor and distributor
in mind, it is based on laboratory test results and IPEX’s many years of
field experience.
At IPEX, we have been extruding PVC conduit and molding fittings
since 1951. We formulate our own compounds, maintain strict quality
control during production, and offer one of the most comprehensive
lines of nonmetallic electrical products throughout North America.
More important, our commitment to customers extends beyond the
sale. Quality control and thorough jobsite field reports have earned
IPEX a reputation for product quality and service excellence.

• Water treatment plants
• Airports
• Subways
• Sewage treatment plants
• Pulp and paper industries
• Parking garages
• Car washes
• Fish plants
• Marinas
• Agricultural, dairy, hogs, cattle,
chicken, etc.
• Bridges and tunnels
• Food processing plants
• Steel mills
• Mines

3

4

ADVANTAGES

ADVANTAGES

Labour Savings

Easy Wire Pulls

Compared to metal, PVC products reduce labour on a typical installation
by up to two-thirds. The reason? PVC is easy to work with. It can also be
cut and joined without pipe vises, cutters, threading equipment and
reamers associated with metal conduit.

PVC’s exceptionally smooth interior surface greatly reduces the
amount of friction while pulling conductors/wires through long runs,
even with 90° bends. A large pull-rope and wire-pulling compound
should be used when pulling all conductors and wires.

Lightweight Conduit

Noncorroding

Scepter Rigid PVC Conduit is one-half the weight of aluminum and
one-sixth the weight of steel. As a result, handling and installation are
easier and faster, reducing labour costs.

PVC is immune to damage from naturally
corrosive soil conditions, as well as electrochemical and galvanic corrosion. This
ensures lower maintenance costs and
superior performance For The Long Run.

Sunlight Resistant
The 2006 Canadian Electrical Code rule 2-130 is intended to ensure
that totally enclosed nonmetallic raceways are properly protected
against adverse effects from direct exposure to UV rays. Electrical
nonmetallic raceways marked for such applications are suitable for
installation and use in direct exposure to the rays of the sun. Scepter
rigid PVC Conduit meets the criteria for sunlight resistance, is
approved for the purpose, and is appropriately marked.

Easy Joining
Solvent cementing is all that is required, eliminating the need for
power-threading machines, pipe vises and cutting equipment. A
hacksaw or carpenter’s saw is the only equipment required.

Strength
Scepter Rigid PVC Conduit offers both high impact and high tensile
strength, even in cold temperatures. Scepter Rigid PVC Conduit and
fittings meet and exceed all CSA and UL standards.

Scepter Rigid
PVC Conduit

CSA
Impact Test

UL
Impact Test

Size
(in)
1/2

Size
(mm)
12

8.9 ft.lbs.

(12 joules)

50 ft.lbs.

3/4

20

8.9 ft.lbs.

(12 joules)

80 ft.lbs. (109 joules)

@ -29°F (-34°C)

@ 72°F (23°C)
(68 joules)

1

25

8.9 ft.lbs.

(12 joules) 100 ft.lbs. (136 joules)

1 1/4

32

8.9 ft.lbs.

(12 joules) 120 ft.lbs. (163 joules)

1 1/2

40

8.9 ft.lbs.

(12 joules) 150 ft.lbs. (204 joules)

2

50

8.9 ft.lbs.

(12 joules) 190 ft.lbs. (258 joules)

2 1/2

65

8.9 ft.lbs.

(12 joules) 210 ft.lbs. (285 joules)

3 – 6 75 – 150 8.9 ft.lbs.

(12 joules) 220 ft.lbs. (298 joules)

Nonconducting
Scepter Rigid PVC conduit pipe and fittings
are nonsparking and nonconducting, thereby
eliminating the most dangerous ‘second
point of contact’ and ‘phase to ground’
faults. The use of a separate grounding
conductor provides a complete and positive
ground for the whole system.

Chemical Resistance
One of the greatest benefits of PVC is its
excellent chemical resistance. It resists
attack by acids, alkalies, salt solutions, and
many other types of chemicals. For more
information on PVC and chemical
resistance, refer to the IPEX Chemical
Resistance Guide.

Long Life
Scepter Rigid PVC Conduit pipe and fittings
retain their original properties after years of
exposure to heat and weather. In addition,
resistance to fungi, bacterial action,
rodents, termites and corrosive agents
ensures a long, trouble-free life for PVC
conduit installed indoors or outdoors.

Concrete Tight
Scepter Rigid PVC Conduit pipe and fittings
are designed and engineered to be concrete
tight in all weather conditions.

5

6

SCEPTER RIGID PVC CONDUIT

ADVANTAGES

SCEPTER PVC CONDUIT

Fire Resistant
IPEX’s proprietary PVC compound used to manufacture Scepter
products is a self-extinguishing material and will not support
combustion. Samples taken from an actual fire show the outer surface
of the conduit was blistered and charred. The interior of the conduit,
however, was unaffected. Additionally, the undamaged conductors
were then removed and reinstalled in new conduit.
Fire-resistant characteristics when tested to CAN ULC S102.2 are as
follows:

0.080" (2mm) thickness

Flame
Spread
10 – 20

Smoke
Developed
225 – 270

Fuel
Contribution
0

0.630" (16mm) thickness

10 – 20

300 – 390

0

IPEX Compound

FT-4 Rating
Scepter Rigid PVC conduit is certified to meet
the requirements of FT-4 allowing its use in
noncombustible construction per Section 3.1.5.20
of the National Building Code, which reads:
1.) Subject to the limits on the size of elements
that penetrate fire separations as stated in
Sentence 3.1.9.3.(2), within a fire compartment
of a building required to be of noncombustible
construction, totally enclosed nonmetallic
raceways not more than 175mm in outside
diameter, or of an equivalent rectangular area,
are permitted to be used to enclose optical fibre
cables and electrical wires and cables, provided
the raceways exhibit a vertical char not more
than 1.5m when tested in conformance with the
Vertical Flame Test (FT - 4) Conduit or Tubing
on Cable Tray in Clause 6.16 of CSA C22.2
No. 211.0, “General Requirements and
Methods of Testing for Nonmetallic conduit.”

Suitable for Direct Burial
PVC is suitable for direct burial and requires no extra protection when
installed in accordance with the Canadian Electrical Code and the
local inspection authority guidelines. The usual care regarding
trenches and backfilling should be respected.

One-Source Specification
IPEX offers a full range of PVC fittings and accessories. As a result, it
is easy to specify a single source PVC system.

Quality Control
In addition to IPEX’s quality control testing, all Scepter electrical
products carry third-party certification by CSA, UL and NRTL.

7

This section covers the most comprehensive design and installation of
Scepter Rigid PVC Conduit pipe and fittings. Always consult the
authority having jurisdiction for specific installation procedures.

CSA C22.2 No. 211.2
CSA C22.2 No. 211.0
FT-4 for 1/2" to 6"

NEMA TC-2
Corps. of Engineers Spec.
CE 303:01
Military Spec, Federal Spec.
WC 1094A

INSTALLATION

INSTALLATION

Support

Solvent Cementing

Due to PVC’s light weight, support
spacing is different than that used
with metal conduits. Supporting
straps should NOT be firmly tightened,
so that linear movement of the pipe is
possible. The maximum allowable support
spacing, as per Canadian Electrical Code (CEC),
is as follows:

After cutting Scepter Rigid PVC conduit,
sharp edges or burrs from inside the conduit
should be removed with a knife. Thoroughly
clean the end of the pipe and inside the
fitting with a pipe cleaner. Apply a generous
amount of IPEX solvent cement to both
surfaces; slide together and give a quarter
turn to ensure the solvent is spread evenly on
the material. Hold together for a few seconds
until the joint is made.

Support Spacing For Scepter Rigid PVC
Conduit Pipe
Nominal Conduit Diameter
inches
mm
1/2
12
3/4
20
1
25
1-1/4
32
1-1/2
40
2
50
2-1/2
65
3
75
3-1/2
90
4
100
5
125
6
150

Maximum Support Spacing
feet
metres
2-1/2
0.75
2-1/2
0.75
2-1/2
0.75
4
1.2
4
1.2
5
1.5
6
1.8
6
1.8
7
2.1
7
2.1
7
2.1
8
2.5

Maximum Operating
Temperature
The Canadian Electrical Code (CEC) allows
the use of Scepter Rigid PVC Conduit up
to a maximum ambient temperature of
167°F (75°C).

Cutting
Scepter Rigid PVC conduit can be easily cut
on the jobsite by using a hacksaw,
carpenter’s saw or PVC conduit cutters. For
larger sizes of conduit, the use of a mitre box
is also recommended to ensure a square cut.

Usually the solvent-cemented joint will be
strong enough to install immediately.
However, in climates with low temperatures or
areas with high humidity, extra time may be
required before moving the pipe for permanent installation. Solventcemented joints appear to “set up” instantly, but will take 24 hours to
cure properly. After this time, the solvent-cemented joint has
completely cured and is waterproof. For extreme cold weather
installations, the use of IPEX PVC Primer is recommended. IPEX
cements and primers are available in quarter-pint (125ml), half-pint
(250ml), pint (500ml), quart (1-litre) and gallon (4-litre) containers.

Bending
PVC is a thermoplastic material that, when
heated, becomes soft and pliable. As a
result, its shape can be altered.
A flameless heat source is recommended to
heat the pipe. AN OPEN FLAME SHOULD
NOT BE USED. Either an electric unit or an
infra-red propane unit is recommended.
The necessary temperature for bending pipe
is 260°F (127°C). The pipe must be heated
evenly over an area approximately ten times
the diameter of the pipe before any attempt
at bending is made. Bending the pipe when
it has not been thoroughly heated will cause
the pipe to “kink.” With proper care and a
little practice, the bend will form easily.
Cooling the pipe with cold air or water will
cause “spring back.” Allow a few extra
degrees of overbending to compensate.
Maximum bending radius shall be six times
the internal diameter according to the
Canadian Electrical Code.

9

SCEPTER PVC CONDUIT

SCEPTER PVC CONDUIT

8

11

EXPANSION & CONTRACTION

EXPANSION & CONTRACTION

Using Expansion Joints

Number of Expansion Joints Required

It’s just as important to know when to use an
expansion joint as it is to know how to install it
correctly. Expansion joints are required when the
temperature change is greater than 25°F (14°C).
Scepter Rigid PVC conduit has a coefficient of
linear expansion of 3.6 x 10-4 in./ft./°F
(.054mm/m/°C.) Generally, a 100 ft. (30.48m)
run of PVC conduit will undergo a change in
length of 3.6 inches (91.44mm) for every 100°F
(56°C) temperature change.

Use the following equation to determine the number of expansion
joints needed for a Scepter Rigid PVC Conduit installation:

Number of joints =

total expansion (mm or in)
E

E = Expansion joint travel length 101.6mm (4") or 203.2mm (8")
depending on diameter.
Always round up to the next whole number.

For conduit installed indoors, the range of expansion and contraction
can be calculated using the maximum air temperature plus the heat
contributed by the conductors inside the conduit and minimum air
temperature expected. Expansion joints are not required indoors
unless there are widely varying temperatures such as the attic of a
building.

Setting the Piston Opening
The expansion joint must be installed to allow for expansion and
contraction of the conduit run. On a cold day, if an expansion joint is
installed completely closed with the piston bottomed, there is no room
for expansion when the conduit is warmed. If it is installed open to the
maximum on a hot day, the expansion joint will pull apart when cooled.

Conduit installed outdoors, exposed to direct sunlight, will be
considerably hotter than the air temperature. As a guideline in this
case, add 27°F (15°C) to the temperature change. Expansion joints
should be installed to allow for all anticipated temperature changes.

The correct piston opening for any installation condition can be easily
determined using the formula below:
Piston setting =

PVC PIPE LENGTH VARIATION
DUE TO TEMPERATURE CHANGE (ºF)
Coefficient = 3.6 x 10-4 in/ft/ºF

Expansion
Formula

°F
Total Expansion (in.)
= length of run (ft.)
x temperature change
(°F) x 0.00036

TEMPERATURE CHANGE IN ºF

By using the following
formulas and the charts
below, the total expected
expansion in a run can be
easily determined:

Compressed length +

120
100
80

)

xE

PVC PIPE

70
60
As a general rule
for every
temperature
change of 10ºF,
PVC pipe will
expand or contract
3/8" per 100'

50
40
30
20
10
0

1
2
3
4
LENGTH VARIATION in/100 ft OF PIPE

5

PVC PIPE LENGTH VARIATION
DUE TO TEMPERATURE CHANGE (ºC)
Coefficient = .054/mm/m/ºC

TEMPERATURE CHANGE IN ºC

max. temp. – min. temp.

Formula can be used for both metric and imperial measurements.

90

60

Total Expansion (mm)
= length of run (m)
x temperature change
(°C) x 0.054

max. temp. – installation temp.

110

or

°C

(

55
50
45
40

PVC PIPE

35
30
25
20
15
10
5
0

As a general rule
for every
temperature
change of 5ºC,
PVC pipe will
expand or contract
2.7mm per 10m
.5
1.0 1.5 2.0 2.5 3.0 3.5
LENGTH VARIATION mm/m OF PIPE

Size
(mm)

(in)

13
20
25
32
38
51
64
76
89
102
127
152

1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6

Compressed Length
(mm)
(in)

(mm)

(in)

203.2
203.2
215.9
228.6
228.6
235.0
235.0
362.0
362.0
362.0
362.0
362.0

101.6
101.6
101.6
101.6
101.6
101.6
101.6
203.2
203.2
203.2
203.2
203.2

4
4
4
4
4
4
4
8
8
8
8
8

8.00
8.00
8.50
9.00
9.00
9.25
9.25
14.25
14.25
14.25
14.25
14.25

Travel

SCEPTER PVC CONDUIT

SCEPTER PVC CONDUIT

10

EXPANSION & CONTRACTION

EXPANSION & CONTRACTION

Location of Expansion Joints

Figure 1

Proper functioning of an expansion joint depends on three procedures:
1. The correct placement of the expansion joint.
2. The proper installation of Scepter Rigid PVC conduit and the
expansion joint.
3. The proper placement and fastening of support straps.

One Expansion Joint
Figure 1
If only one expansion joint is needed between two boxes, the barrel of
the joint is rigidly fastened close to the first box. Scepter Rigid PVC
conduit should then be loosely supported with straps, allowing the
conduit to move freely as it expands and contracts.

Figure 2

Two Expansion Joints
Figure 2
If two expansion joints are
needed, the joints should
be firmly fastened back to
back at the centre of the run.
Scepter Rigid PVC conduit is
loosely supported with straps,
allowing the conduit to move freely as it
expands and contracts.

Figure 3

Two Expansion Joints (Alternative)
Figure 3
Alternatively, the centre of the run and the two expansion joints
(located at the boxes) should be rigidly fastened. All other support
straps should be loosely fastened.

Three or More Expansion Joints
Figure 4
If more than two joints are needed in a very long run, they should be
put in a series, one after the other. Each barrel must be rigidly
fastened while conduit is loosely supported with straps allowing the
conduit to move freely as it expands and contracts. When installed in a
series, each section acts independently of the other. Spacing of conduit
supports must be in accordance with Section 12-1114 of the Canadian
Electrical Code (CEC).

Figure 4

13

SCEPTER PVC CONDUIT

SCEPTER PVC CONDUIT

12

15

CONDUIT DIMENSIONS

EXPANSION & CONTRACTION

Installation of Expansion Joints

Scepter Rigid PVC Conduit Dimensions (inches)

Installation recommendations:
• Expansion joints should be mounted so the piston can travel in a
straight line in the barrel. If the alignment is not straight, the
piston will bind, preventing the joint from functioning correctly.

Nominal Product Code
Size

• The expansion joint barrel should be clamped tight, but the conduit
mounted loose enough in its hangers to allow for movement as it
expands and contracts.
• Scepter nonmetallic straps are correctly sized and designed for
proper support, and must be used to secure the conduit.
• When expansion joints are used in a vertical position, the piston
should be mounted in a downward position so dirt cannot deposit
between the barrel and piston at the muzzle of the expansion joints.

1/2
3/4
1
1-1/4
1-1/2
2

WARNING

2-1/2
3

Common Mistakes
Three common mistakes are:
1. Forgetting to use expansion joints.

3-1/2
4

2. Not using enough expansion joints.
3. Overtightening of support straps.
It is more cost effective to use more expansion joints than needed,
rather than too few. It is difficult to correct the problem after
conductors are installed and in service. Failure to accommodate
expansion/contraction may result in pipe fracture.

5
6

(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')
(10')
(20')

032105
032106
032107
032108
032110
032111
032112
032114
032115
032116
032120
032121
032125
032126
032130
032131
032135
032136
032140
032141
032150
032151
032160
032161

OD

ID

Min.
Wall

Weight Standard
lbs/100' ft/crate

0.840 0.622

0.109

15

1.050 0.824

0.113

21

1.315 1.049

0.133

31

1.660 1.380

0.140

42

1.900 1.610

0.145

53

2.375 2.067

0.154

71

2.875 2.469

0.203

112

3.500 3.068

0.216

166

4.000 3.548

0.226

200

4.500 4.026

0.237

236

5.563 5.047

0.258

321

6.625 6.065

0.280

417

6,000
12,000
4,400
8,800
3,600
7,200
3,300
6,600
2,250
4,500
1,400
2,800
780
1,560
780
1,560
630
1,260
600
1,200
230
460
260
520

Scepter Rigid PVC Conduit Dimensions (mm)
Nominal
Size

OD

ID

Min. Wall

Weight
kgs/100'

12
20
25
32
40
50
65
75
90
100
125
150

21.3
26.7
33.4
42.2
48.3
60.3
73.0
88.9
101.6
114.3
141.3
168.3

15.8
20.9
26.6
35.1
40.9
52.5
62.7
77.9
90.1
102.3
128.2
154.1

2.8
2.9
3.4
3.6
3.7
3.9
5.2
5.5
5.7
6.0
6.6
7.1

22.6
31.2
46.2
63.0
78.4
105.5
167.2
247.8
297.7
352.4
478.5
621.0

SCEPTER PVC CONDUIT

SCEPTER PVC CONDUIT

14

SCEPTER PVC CONDUIT

16

SCEPTER ® CONDUIT FITTINGS

CONDUIT DIMENSIONS

17

Weight Comparison of Scepter Rigid PVC
Conduit - lbs./100 ft.
Nominal Size (in)

Rigid PVC

Aluminum

Rigid Steel

1/2

15

28

79

3/4

21

27

105

31

53

153

42

70

201

1-1/2

53

86

249

2

71

116

334

2-1/2

112

183

527

3

166

239

690

3-1/2

200

288

831

4

236

340

982

5

321

465

1,334

6

417

613

1,771

SCEPTER PVC
FITTINGS

1
1-1/4

Weight Comparison of Scepter Rigid PVC
Conduit - kg/100 m
Nominal Size (in)

Rigid PVC

Aluminum

Rigid Steel

12

23

41

118

20

31

54

157

25

46

79

228

32

63

104

300

40

78

129

371

50

106

173

498

65

167

272

786

75

248

356

1,029

90

298

429

1,239

100

352

507

1,464

125

479

694

1,989

150

621

914

2,641

CSA C22.2 No. 211.2
FT-4 for 1/2 " to 6"

NEMA TC2
Corps. of Engineers Spec.
CE 303:01
Military Spec, Federal Spec.
WC 1094A

Industry leaders specify Scepter PVC fittings by name. For years,
Scepter PVC fittings have set the standard for quality and value-added
features not normally available from other suppliers. Features such as our
threaded brass inserts, brass screws, and superior PVC gasketing system
make a real difference.

C22.2 No. 85

UL Listed
UL514B – UL514C

NEMA TC-2, 3

18

19

FITTINGS

FITTINGS

C

B
A B

Size (in)

Part
Number

Product
Code

A (in)

B (in)

C (in)

1/2

EC10

077001

1.080

0.840

1.437

1/2

FA10

3/4

EC15

077002

1.300

1.050

2.200

1/2

FA10

1

EC20

077003

1.590

1.315

2.031

3/4

1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6

EC25
EC30
EC35
EC40
EC45
EC50
EC55
EC60
EC65

C

Female Adapters

077004
077005
077006
077007
077008
077009
077010
077011
077012

2.000
2.230
2.720
3.320
4.000
4.500
5.000
6.120
7.370

1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625

A
D

Part
Product
Size (in) Number
Code

A (in)

B (in)

C (in)

D (in)

076544

0.620

1.080

0.800

1.725

077041

0.620

1.080

0.800

1.725

FA15

077042

0.820

1.300

0.800

1.900

2.156

1

FA20

077043

1.065

1.590

1.000

2.300

2.281

1-1/4

FA25

077044

1.395

2.000

1.015

2.425

2.406

1-1/2

FA30

077045

1.575

2.230

1.050

2.440

3.187

2

FA35

077046

2.050

2.720

1.075

2.550

3.437

2-1/2

FA40

077047

1.020

3.250

1.500

2.700

3.625

3

FA45

077048

3.090

4.000

1.630

4.100

3.750

3-1/2

FA50

077049

3.540

4.500

1.800

3.895

4

FA55

077050

4.025

5.000

1.755

4.210

5

FA60

077051

5.035

6.120

2.065

5.240

6

FA65

077052

6.045

7.370

2.065

5.235

4.187
4.562

Note: All female adapters have NPT-tapered threads.

Terminal Adapters
Part
Product
Size (in) Number Code

5° Couplings
A (in)

B (in)

C (in)

D (in)

1/2

TA10

077021

0.700

0.591

0.750

1.550

3/4

TA15

077022

0.675

0.790

1.000

1.750

1

TA20

077023

0.625

1.000

1.115

1.860

1-1/4

TA25

077024

0.640

1.311

1.300

2.125

1-1/2

TA30

077025

0.725

1.530

1.425

2.250

2

TA35

077026

0.800

1.970

1.150

2.100

2-1/2

TA40

077027

0.800

2.346

1.900

2.930

3

TA45

077028

0.815

2.915

2.000

3.055

3-1/2

TA50

077029

1.000

3.385

1.715

3.055

4

TA55

077030

0.815

3.850

1.990

3.215

5

TA60

077031

1.725

5.015

2.000

5.985

6

TA65

077032

1.875

6.025

2.130

6.500

Note: 1/2" to 1-1/4" TA – tapered thread.
1-1/2" to 6" TA – non-tapered thread.

Size (in)

Part Number

Product Code

L (in)

2

5EC35

077100

4.0

2-1/2

5EC40

077101

5.5

3

5EC45

077103

6.0

3-1/2

5EC50

077102

7.0

4

5EC55

077104

7.0

5

5EC60

077105

7.5

6

5EC65

077106

11.0

Threaded Reducer Bushings
Size (in)

Part Number

Product Code

3/4 x 1/2

1825

077314

1 x 1/2

1826

077315

1 x 3/4

1827

077316

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

Couplings

20

FITTINGS

21

FITTINGS

“O” Ring Expansion Joints
Reducer Bushings
Part Number

Product Code

3/4 x 1/2

1805

077300

1 x 1/2

1805-1

077301

1 x 3/4

1806

077302

1-1/4 x 3/4

1807-1

077303

1-1/4 x 1

1807

077304

1-1/2 x 1

1808-1

077305

1-1/2 x 1-1/4

1808

077306

2x1

1809-1

077313

2 x 1-1/4

1809

077307

2 x 1-1/2

1810

077308

2-1/2 x 2

1811

077309

3x2

1812-1

077310

3 x 2-1/2

1812

077311

4x2

1813-1

077319

4x3

1813

077312

4 x 3-1/2

1814

077317

B
min.

A
max.

Size
(in)

Part
Number

Product
Code

A (in)
max.

B (in)
min.

1/2

EJ10

077381

12.00

8.00

3/4

EJ15

077382

12.00

8.00

1

EJ20

077383

12.50

8.50

1-1/4

EJ25

077384

13.00

9.00

1-1/2

EJ30

077385

13.00

9.00

2

EJ35

077386

13.25

9.25

2-1/2

EJ40

077387

13.25

9.25

3

EJ45

077388

22.25

14.25

3-1/2

EJ50

077389

22.25

14.25

4

EJ55

077390

22.25

14.25

5

EJ60

077391

22.25

14.25

6

EJ65

077392

22.25

14.25

Expansion and Deflection Fitting Assemblies

*Additional sizes of reducer bushings are available upon request.

End Caps
Size (in)

Part Number

Product Code

1/2

CAP10

077421

3/4

CAP15

077422

1

CAP20

077423

1-1/4

CAP25

077424

1-1/2

CAP30

077425

2

CAP35

077426

2-1/2

CAP40

077427

3

CAP45

077428

3-1/2

CAP50

077429

4

CAP55

077430

5

CAP60

077431

6

CAP65

077432

Size (in)

Part Number

Description

Product Code

2

SE-J-35

Complete Assembly

077889

3

SE-J-45

Complete Assembly

077890

4

SE-J-55

Complete Assembly

077891

R
T

Utility 90° Elbows c/w
Solvent Bell End
D

Size
(in)

Part
Number

Product
Code

D (in)

T (in)

R (in)

2

NSL 2-24

069257

2.375

41.20

24

2

NSL 2-36

069260

2.375

31.70

36

3

NSL 3-24

069265

3.500

41.20

24

3

NSL 3-36

069261

3.500

31.70

36

4

NSL 4-36

069267

4.500

31.70

36

4

NSL 4-48

069266

4.500

22.25

48

5

NSL 5-36

069263

5.563

31.70

36

6

NSL 6-36

069264

6.625

31.70

36

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

Size (in)

FITTINGS

23

FITTINGS

T

22

R

90° Elbows

30° Elbows

With integral bell.

c/w Solvent Bell End

(Plain End x Plain End)

Part
Number

Product
Code

D (in)

T (in)

R (in)

1/2

EE1090

069081

0.840

1.500

4.00

3/4

EE1590

069082

1.050

1.500

4.50

1

EE2090

069083

1.315

1.875

5.75

1-1/4

EE2590

069084

1.660

2.000

7.25

1-1/2

EE3090

069085

1.900

2.000

8.25

2

EE3590

069086

2.375

2.000

9.50

2-1/2

EE4090

069087

2.875

3.000

10.50

3

EE4590

069088

3.500

3.125

13.00

3-1/2*

EE5090

069089

4.000

3.250

15.00

4

EE5590

069090

4.500

3.375

16.00

5

EE6090

069091

5.563

3.625

24.00

6

EE6590

069092

6.625

3.750

30.00

Size
(in)

Part
Number

Product
Code

D (in)

T (in)

R (in)

1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6

EE1030
EE1530
EE2030
EE2530
EE3030
EE3530
EE4030
EE4530
EE5030
EE5530
EE6030
EE6530

069241
069242
069243
069244
069245
069246
069247
069248
069249
069250
069251
069252

0.840
1.050
1.315
1.660
1.900
2.375
2.750
3.500
4.000
4.500
5.563
6.625

1.500
1.500
1.875
2.000
2.000
2.000
3.000
3.125
3.250
3.375
3.625
3.750

4.00
4.50
5.75
7.25
8.25
9.50
10.50
13.00
15.00
16.00
24.00
30.00

* Plain end only

R
T

Utility 90° Elbows
c/w Solvent Bell End
D

Size
(in)

45° Elbows
c/w Solvent Bell End

With integral bell.

Size
(in)

Part
Number

Product
Code

D (in)

T (in)

R (in)

1/2

EE1045

069201

0.840

1.500

4.00

3/4

EE1545

069202

1.050

1.500

4.50

1

EE2045

069203

1.315

1.875

5.75

1-1/4

EE2545

069204

1.660

2.000

7.25

1-1/2

EE3045

069205

1.900

2.000

8.25

2

EE3545

069206

2.375

2.000

9.50

2-1/2

EE4045

069207

2.875

3.000

10.50

2
2
3
3
4
4
5
6

Part
Number

Product
Code

D (in)

T (in)

R (in)

NSL
NSL
NSL
NSL
NSL
NSL
NSL
NSL

069257
069260
069265
069261
069267
069266
069263
069264

2.375
2.375
3.500
3.500
4.500
4.500
5.563
6.625

10.200
31.700
41.200
31.700
31.700
31.700
31.700
31.700

24.00
36.00
24.00
36.00
36.00
48.00
36.00
36.00

2-24
2-36
3-24
3-36
4-36
4-48
5-36
6-36

3

EE4545

069208

3.500

3.125

13.00

3-1/2*

EE5045

069209

4.000

3.250

15.00

90° Elbows

4

EE5545

069210

4.500

3.375

16.00

Extended bend

5

EE6045

069211

5.563

3.625

24.00

6

EE6545

069212

6.625

3.750

30.00

* Plain end only

90º

Size
(in)

Part
Number

Product
Code

D (in)

T (in)

R (in)

1-1/4
1-1/2
2

EE2590E
EE3090E
EE3590E

069096
069097
069098

1.66
1.90
2.38

10.24
12.80
11.02

6.73
8.25
13.00

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

D

Size
(in)

24

25

FITTINGS

PVC Coated Steel, 1 Hole

Size (in)

Part Number

Product Code

Size (in)

Part Number

Product Code

1/2

PS10

077811

1/2

CS10-1

077831

3/4

PS15

077812

3/4

CS15-1

077832

1

PS20

077813

1

CS20-1

077833

1-1/4

PS25

077814

1-1/4

CS25-1

077834

1-1/2

PS30

077815

1-1/2

CS30-1

077835

2

PS35

077816

2

CS35-1

077836

2-1/2

CS40-1

077837

3

CS45-1

077838

3-1/2

CS50-1

077839

4

CS55-1

077840

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

Pipe Straps PVC, 2 Hole

Polyethylene (PE), 2 Hole
Size (in)

Part Number

Product Code

2-1/2

PS40

077262

3

PS45

077263

4

PS55

077264

PVC Coated Steel, 2 Hole
Size (in)

Part Number

Product Code

2

CS35

077818

2-1/2

CS40

077819

3

CS45

077820

3-1/2

CS50

077821

4

CS55

077822

5

CS60

077824

6

CS65

077823

Conduit Clamps & Spacers
Size
(in)

Part
Number

Product
Code

X (in)

Y (in)

Z (in)

1/2

CCS10

077794

1.191

2.414

1.824

3/4

CCS15

077796

1.195

2.660

2.106

1

CCS20

077797

1.215

2.962

2.443

1-1/4

CCS25

077798

1.182

3.300

2.855

1-1/2

CCS30

077799

1.193

3.600

3.170

2

CCS35

077800

1.195

4.135

3.785

Strut
Base

CCS-B

077343

_

_

_

* CCS-B are sold individually, two pieces are required
to create one base unit.

Y

X

Z

FITTINGS

26

Access Fittings* Type LB

Access Fittings* Type LL

F
G
C

F

H

H

G
B

B

E

I

B

K

27

FITTINGS

TYPE LL

C

E

I

Size (in)

Part Number

Product Code

Size (in)

Part Number

Product Code

1/2

SLB10S

077541

1/2

SLL10S

077521

077542

3/4

SLL20S

077522

077543

1

SLL30S

077523

077544

1-1/4

SLL40S

077524

077545

1-1/2

SLL50S

077525

077546

2

SLL60S

077526

077547

2-1/2

SLL70S

077527

077548

3

SLL80S

077528

077549

3-1/2

SLL90S

077530

077550

4

SLL100S

077529

3/4

SLB20S

1

SLB30S

1-1/4

SLB40S

1-1/2

SLB50S

2

SLB60S

2-1/2

SLB70S

3

SLB80S

3-1/2

SLB90S

4

SLB100S

Access Fittings* Type LR

Access Fittings* Type C

H

G

B

B
C

E

E

C D

I

B

B
A

F

Size (in)
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4

Part Number
SLR10S
SLR20S
SLR30S
SLR40S
SLR50S
SLR60S
SLR70S
SLR80S
SLR90S
SLR100S

Product Code

Size (in)

Part Number

Product Code

077481

1/2

SC10S

077501

077482

3/4

SC20S

077502

077483

1

SC30S

077503

077484

1-1/4

SC40S

077504

077485

1-1/2

SC50S

077505

077486

2

SC60S

077506

077480

2-1/2

SC70S

077507

077488

3

SC80S

077508

077487

3-1/2

SC90S

077510

077489

4

SC100S

077509

* All access fittings are CSA and UL listed for wet locations. Supplied with threaded brass
inserts, combination brass head screws and PVC gasketing.
* Stainless steel screws are available upon request.
**Not UL Listed.

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

B

FITTINGS

28

Access Fittings* Type T

Access Fittings* Type TB**

J

K

B

J

29

FITTINGS

E

C D

I

D

E

B

B

L

J

B

J

Size (in)

Part Number

Product Code

Size (in)

Part Number

Product Code

1/2

STB10S

077451

1/2

ST10S

077461

3/4

STB20S

077452

3/4

ST20S

077462

1

STB30S

077453

1

ST30S

077463

1-1/4

STB40S

077454

1-1/4

ST40S

077464

1-1/2

STB50S

077455

1-1/2

ST50S

077465

2

STB60S

077456

2

ST60S

077466

2-1/2

ST70S

077467

3

ST80S

077468

3-1/2

ST90S

077571

Size (in)

A (in)

B (in)

C (in)

D (in)

E (in)

F (in)

4

ST100S

077572

1/2

5.606

0.639

1.268

1.100

0.840

4.337

3/4

5.606

0.810

1.536

1.325

1.050

5.395

1

6.500

0.910

1.700

1.600

1.335

6.250

1-1/4

7.900

1.050

2.300

2.250

1.660

7.625

1-1/2

8.500

1.125

2.675

2.250

1.900

8.250

2

10.875

1.160

3.188

2.820

2.375

10.531

2-1/2

14.600

1.750

4.500

3.950

2.870

13.630

3

14.600

1.900

4.500

3.950

3.510

13.630

3-1/2

17.040

2.125

5.536

5.000

4.000

16.000

4

17.040

2.125

5.536

5.000

4.530

16.000

Access Fittings* Type E
F

C

E
B

Access Fitting Dimensions*

Size (in)

Part Number

Product Code

1/2

SE10S

077561

Size (in)

G (in)

H (in)

I (in)

J (in)

K (in)

L (in)

3/4

SE20S

077562

1/2

4.095

1.297

2.487

2.280

1.005

0.750

1

SE30S

077563

3/4

4.095

1.297

2.487

2.803

1.005

0.810

1-1/4

SE40S

077564

1

4.750

1.500

2.075

3.250

1.125

1.115

1-1/2

SE50S

077565

1-1/4

5.750

1.750

3.575

3.950

1.562

1.300

2

SE60S

077566

1-1/2

6.500

1.750

3.938

4.250

1.656

1.425

2-1/2

SE70S

077567

2

8.156

2.344

4.535

5.438

1.968

1.160

3

SE80S

077568

2-1/2

9.825

3.805

6.240

7.300

2.610

-

3-1/2

SE90S

077569

3

10.897

2.733

6.240

7.300

2.610

-

4

SE100S

077570

3-1/2

11.465

4.535

7.500

8.535

2.975

-

4

11.465

4.535

7.500

8.535

2.975

-

* All access fittings are CSA and UL listed for wet locations. Supplied with threaded brass
inserts, combination brass head screws and PVC gasketing.
* Stainless steel screws are available upon request.
**Not UL Listed.

* All access fittings are CSA and UL listed for wet locations. Supplied with threaded brass
inserts, combination brass head screws and PVC gasketing.
* Stainless steel screws are available upon request.
**Not UL Listed.

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

B

30

FITTINGS

Meter Hubs

End Bells
Product Code

Size (in)

Part Number

Product Code

EB-10

077406

1-1/4

MHU25

077961

EB-15

077085

1-1/2

MHU30

077963

1

EB-20

077323

2

MHU35

077965

1-1/4

EB-25

077324

2-1/2

MHU40

077967

1-1/2

EB-30

077325

3

MHU45

077968

2

EB-35

077326

2-1/2

EB-40

077327

3

EB-45

077328

3-1/2

EB-50

077329

4

EB-55

077330

5

EB-60

077331

6

EB-65

077332

Size (in)

Part Number

1/2
3/4

Long Meter Offsets
(Fabricated)
Size (in)

Part Number

Product Code

1-1/4

LMO25

069641

1-1/2

LMO30

069645

2

LMO35

069646

Service Entrance Fittings
Size (in)

Part Number

Product Code

1/2

EF10

077281

3/4

EF15

077282

“Two in One” Pull Elbow
The “two in one” access pull elbow reduces
inventory costs & increases installation flexibility
(3/4" hub fitting supplied with 3/4" x 1/2"
reducers). The pull elbow is approved for wet
location use and is manufactured from high
impact, nonconducting and noncorroding PVC.

1

EF20

077283

1-1/4

EF25

077284

1-1/2

EF30

077285

2

EF35

077286

2-1/2

EF40

077287

Size (in)

Part Number

Product Code

3

EF45

077288

1/2 or 3/4

PE15/10

077491

3-1/2

EF50

077289

4

EF55

077290

Size (in)

Part Number

Product Code

1-1/4

MO25

077941

2

MO35

077942

Meter Offsets

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

31

FITTINGS

FITTINGS

Nonmetallic Threaded Strain Relief Connector
c/w “O” Ring, Locknut & 6 Grommets

F Series - Single Gang Plates

1.415”
dia.

DRC15/10 TSC15/10

1.610”
dia.

1.760”
dia.

20RC15/10 20-3RC15/10 30-3RC15/10 BRC15/10

Size (in)

Part Number

Product Code

Part Number

Product Code

1/2

TSRC10

077754

Duplex Receptacle

DRC15/10

077617

3/4

TSRC15

077756

Toggle Switch

TSC15/10

077616

Single Receptacle

20RC15/10

077618

Single Receptacle

20-3RC15/10

077619

Single Receptacle

30RC15/10

077620

Blank c/w Gasket

BRC15/10

077611

PVC Gasket

GASK15/10

077621

Description

Strain Relief Connectors
c/w 6 Grommets
Part Number

Product Code

3/4

SRC15

077985

F Series - Double Gang Plates
GASK20-2

Size (in)

Strain Relief Connectors Grommet Dimensions

BRC20-2

Grommet

From

TSC20-2

To
Description

W = .195"
L = .450"
W = .220"

W = .285"
L = .530"
W = .291"

L = .516"

L = .565"

Ø = .240"

Ø = .300"

Ø = .290"

Ø = .385"

DRC20-2

TSDC20-2

Part Number

Product Code

Blank Cover c/w Gasket

BRC20-2

077614

Double Switch

TSC20-2

077738

Double Duplex Receptacle

DRC20-2

077740

Combo Switch Duplex Rec.

TSDC20-2

077739

PVC Gasket

GASK20-2

077743

GASK20-3

F Series - Triple Gang Plates

BRC20-3

DRC20-3

Description
Ø = .500"

Note: All grommets are supplied with TSRC10, TSRC15 and SRC15.

Ø = .625"

TSDC20-3

Product Code

DRC20-3

077747

DSDR20-3

077745

TSC20-3

077744

Combo Switch Receptacle

TSDC20-3

077746

Blank Cover c/w Gasket

BRC20-3

077748

PVC Gasket

GASK20-3

077749

Combo Switch Receptacle
Triple Switch

Ø = .525"

TSC20-3

Part Number

Triple Receptacle

Ø = .405"

DSDR20-3

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

33

COVER PLATES

GASK 15/10

32

WEATHERPROOF COVERS

34

Weatherproof Covers - Single Gang
VPT15/10

Description

(in)

Weatherproof Covers - Double Gang

Part
Number

Product
Code

VPT15/10

077630

Description

Part
Number

Product
Code

Toggle Switch Cover

VSC20-2

077741

Combination Switch
& GFI Receptacle

VSRC20-2

077742

Combination Switch
& Duplex Receptacle

VSDR20-2

077752

Combination Switch
& Single Receptacle
Cover

VSRR20-2

077753

Double Door GFCI
Cover

VSGG20-2

077096

Double Door Duplex
Cover

VSDD20-2

077097

GASK20-2

077743

VSC20-2

Plunger-style Switch
Cover
VSC15/10

Toggle Switch Cover

VSC15/10

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

35

WEATHERPROOF COVERS

077612
VSRC20-2

WTG15/10

WDR15/10
RWDR15/10

WGF15/10
RWGF15/10

WTL15
WTL20
WTL30

Grey Toggle Switch
Cover

WTG15/10

077606

Grey Duplex
Receptacle

WDR15/10

077993

White Duplex
Receptacle

RWDR15/10

077786

Grey Ground Fault
Receptacle

WGF15/10

077785

White Ground Fault
Receptacle

RWGF15/10

077787

WTL15

077992

Single Receptacle
Device 15 AMP

VSDR20-2

1.375

Single Receptacle
Device 20 AMP

1.625

WTL20

077994

Single Receptacle
Device 30 AMP

1.722

WTL30

077991

Single Receptacle
Device 50 AMP

2.187

WTL50

077951

Grey Double Door
Duplex Receptacle

WDRE15/10

077087

White Double Door
Duplex Receptacle

RWDRE15/10 077408

VSRR20-2

VSGG20-2

VSDD20-2

WTL50

WDRE15/10
RWDRE15/10

Gasket for W Series
Cover (except WDRE &

(except VSGG20-2
& VSDD20-2)

GASKW

077755

GASKDD

072225

RWDRE)

Gasket for WDRE &
RWDRE Covers

Gasket for 2-Gang ‘F’
Boxes

Note: Weatherproof covers, with lids closed, are CSA and UL Listed for wet locations.

Gasket for VSGG20-2
& VSDD20-2 Double
Gangs

GASKV20-2 072227

BOXES

36

37

BOXES

F Series Single Gang Boxes

F Series Double Gang Boxes

Outside Dimensions:
Height, 49/16" – Width, 213/16" – Depth 2", Cubic Inches = 25.67

FS-2 cu.in = 39.5, FSC-2 & FSS-2 cu.in. = 37.0, FSCC-2 cu.in.= 36.0

FS-2-101520

1/2, 3/4, 1

FSC-2-101520

077441

4.5

4.75

2.5

1/2, 3/4, 1

FSS-2-101520

077442

4.5

4.75

SCEPTER PVC
FITTINGS

FSC

FSS

FSCC

FS

2.5

1/2, 3/4, 1

FSCC-2-101520

077443

4.5

4.75

2.5

Blank

FD-2

077734

4.75

4.75

Size (in)

Part Number

Product Code

3.0

1/2

FSC10

077607

3/4

FSC15

077608

1/2

FS10

077601

3/4

FS15

077602

1/2

FSCC10

077622

3/4

FSCC15

077623

1/2

FSS10

077604

3/4

FSS15

077605

Part Number

H
4.5

OD (inches)
W
D
4.75
2.5

W

H

D

FSC-2-101520

FS-2-101520

FSCC-2-101520

FSS-2-101520

FD-2

Note: 10 = 1/2" Hub, 15 = 3/4" Hub

FD Series Single Gang Deep Boxes
Outside Dimensions:
Height, 49/16" – Width, 213/16" – Depth 23/4", Cubic Inches = 35.30
With the exception of the FD Blank Box, Scepter FD Series Single
Gang Deep Boxes are molded with 1" conduit hubs and supplied with
reducer bushings. The conduit hub(s) are field modified as 1/2", 3/4"
or 1" to accommodate job-site requirements. The appropriate quantity
of 1" x 3/4" and 3/4" x 1/2" reducers to create the desired hub size
are packaged with each FD Series Single Gang Deep Box.
FD Blank

FDS101520

F Series Triple Gang Boxes

1/2, 3/4, 1

FS-3-101520

Product
Code
077337

1/2, 3/4, 1

FSC-3-101520

077438

4.5

6.6

2.5

Blank

FD-3

077737

4.5

6.6

3.0

Hub Size (in)

Part Number

H
4.5

OD (inches)
W
D
6.6
2.5

Note: All F series boxes are supplied with integral mounting feet, threaded brass inserts and
grounding clips.

FDC101520

H

W

D
FS-3-101520

Size (in)

Part Number

Product Code

1/2, 3/4, 1

FDC101520

077291

1/2, 3/4, 1

FDS101520

077299

BLANK

FD BLANK

077603

347 VOLT

FD347

077610

FSC-3-101520

FD-3

SCEPTER PVC
FITTINGS

1/2, 3/4, 1

Product
Code
077440

Hub Size (in)

38

Flanged Box with Fibre-Reinforced Safety
Tread Cover

Octagonal Boxes*
Octagonal Boxes are shipped complete with cover,
gasket, 4 reducing bushings (3/4" x 1/2") and 4
sealing caps to be installed from inside box to
seal off unused entry hubs.

Scepter’s Flanged ‘H’ Series Junction Boxes provide H10 Highway
Loading. The fiber-reinforced safety tread cover secures using recessed
Hex Key fastening hardware offering a simple installation while
reducing the opportunity for tampering.

Size (in)

Part Number

Hub Size (in)

Product Code

4 x 1-1/2

OB15/10

1/2 – 3/4

077983*

4 x 2-1/8

OB20

1

077984*

H887

H887A

CC
B

A

Octagonal Box Extension Rings
Size (in)

Part Number

Product Code

4 x 1 deep

XR20

077989*

4 x 2 deep

XR35

077990*

* Octagonal Boxes are not designed for supporting luminaires.

PVC Molded Junction Boxes
Junction boxes are supplied with
threaded brass inserts, brass screws,
PVC gasketing and mounting feet.
Nylon and stainless steel screws, as
well as larger sizes of fabricated
junction boxes, are available upon
request.

L

Box ID (in)
W
D

B
C

NEMA 1, 2, 3, 4, 4x, 6P, 12, 13
UL listed for wet locations

H664

077685

6

6

4-1/4

9.0

9.0

0.60

H666

077686

6

6

6-1/4

9.0

9.0

0.60

H884

077687

8

8

4-1/4

11.5

11.5

0.75

H886

077688

8

8

6-1/4

11.5

11.5

0.75

H887

077689

8

8

7-1/4

11.5

11.5

0.75

H887-A

077692

8

8

7-1/4

11.5

11.5

0.75

BC

E
(in)

Junction Box Adapters

A
F

C
(in)

D
E

Size (in)

A

E
(in)

Part Number Product Code

1/2

JBA10

077721

F
(in)

3/4

JBA15

077722

1

JBA20

077723

Part
Number

Product
Code

JB442

077659

3.675 4.000 3.450 2.125 2.000

8-32

1-1/4

JBA25

077724

JB444

077696

3.675 4.000 3.450 4.188 3.750

8-32

1-1/2

JBA30

077725

JB446

077669

3.675 4.000 3.450 6.225 6.000

8-32

2

JBA35

077726

JB552

077670

4.680 5.000 4.485 2.000 1.845

8-32

2-1/2

JBA40

077727

JB664

077697

6.000 6.375 5.813 4.188 4.000 10-32

3

JBA45

077728

JB666

077698

6.000 6.375 5.813 6.188 6.000 10-32

3-1/2

JBA50

077729

JB884

077664

8.075 8.625 7.966 4.230 4.005 1/4-20

4

JBA55

077730

JB887

077671

8.100 8.625 7.966 7.250 7.035 1/4-20

JB12124

Lid Dimensions (in)
A
B
C

Unflanged PVC fabricated boxes of any size may be made to
customers’ specifications and come complete with lids, gaskets and
screws. These boxes are not CSA Certified and are not returnable.

Scepter PVC junction boxes are:

B
(in)

Part
Number

Fabricated Boxes

(F = Threaded brass insert size.)

A
(in)

Size
(in)

077672 12.085 12.580 11.874 4.256 4.030 1/4-20

JB12126

077666 12.085 12.580 11.874 6.240 6.025 1/4-20

JB12128

077668 12.085 12.580 11.874 8.250 8.025 1/4-20

Junction Box
Adapter

Standard PVC
Coupling

SCEPTER PVC
FITTINGS

SCEPTER PVC
FITTINGS

39

BOXES

BOXES

40

BOXES

Nonmetallic Floor Box, Cover & Metal Cover
Adapter

Description

Installation is quick and simple with our nonmetallic floor box and
covers, saving both time and money over similar metallic assemblies.

Floor Box Base

All boxes are shipped complete with reducer plugs for added versatility.

Product
Code

076954

FB
FB

Floor Box Base c/w Leveling Ring Adapter
(includes disposable protective cap, reducer plugs
& leveling ring adapter)

077068

FBKIT

Floor Box Stand Kit (includes FB Box)
(is equiped with several height brackets which
accommodate the different rebar and post-tension cable
heights and slab depths found from job-site to job-site.)

077700

This simple yet innovative Round Floor Box Stand is equipped
with several height brackets which
accommodate the different rebar
and post-tension cable heights
and slab depths found from jobsite to job-site. When installed
together, the Floor Box and
Stand can be used in 5-1/2"
to 10" slab depths.
Sold as a Kit, IPEX offers the
Round Floor Box and Stand
conveniently packaged
together as one complete
product offering.

• Raises Entrance Hubs to
Rebar
• Minimizes Footprint on
Concrete Form

AFMC

(includes leveling ring, metal cover adapter & 2 gaskets)

076953

AFMC

Universal Leveling Ring Adapter
076606

LRA-U

LRA-U

Floor Box Duplex Receptacle Cover (Nonmetallic)
(includes flush mount cover, blank cover & gasket)

Brown
Gold
Grey
Light Almond

076943
076942
076941
076940

FBDRCB
FBDRCG
FBDRCGr
FBDRCA

FBDRC

Tri-Service Universal Divider Kit
(includes upper & lower dividers, riser tube & two grommets)

077948

FBUDK

077499

FBYC

FBUDK

Y Connector (3/4")

FEATURE & BENEFITS
• Four Adjustable Heights

FBS-KIT

FBS-KIT

Metal Cover Adapter Kit

One Kit, Four Heights, One Low Cost!

SCEPTER PVC
FITTINGS

The flush-mount covers are available in custom colours and are shipped
with a leveling ring complete with a grounding clip. Metal cover adapter
kits are also available, allowing you to adapt to metal floor plates. Our 6"
deep floor box allows flexibility for various concrete floor pours, while
the 4 3/4" width offers easy access and ample wire room. Scepter’s FB
box is molded with 2 - 1" and 2 - 3/4" hub openings.

Part
Number

(Includes disposable protective cap & reducer plugs)

Scepter’s floor box and duplex receptacle covers are constructed from
high impact, noncorroding and nonconducting PVC.
SCEPTER PVC
FITTINGS

41

BOXES

• Withstands Tough Job Site
Conditions

Brass Cover Plates

• Easy to Install

(offers a one-piece design measuring 5-3/4" diameter. Are available
in a variety of styles accommodating power and communication
needs. Install to the FB box using the universal leveling ring adapter.

• Cost Effective

For more information, visit our NEW website www.ipexelectrical.com

Duplex Screw Cover
Duplex Screw Cover
Single Screw Cover
Single Screw Cover
Duplex Flip Lid (single)
Duplex Flip Lid (double)

DSC
DSC-P/C
SSC
SSC-P/C
DFL-1
DFL-2

178091
178092
178093
178094
178095
178096

FBYC

43

CONDUIT REPAIR KIT

42

Conduit Cement c/w Applicator Cap

Conduit Repair Kit

Part Number

Product Code

125ml

S100PT25

074717

250ml

S100PT5

074713

500ml

S100PT

074714

1L

S100QT

074715

4L

S100GAL

074716

Size

Part Number

Product Code

SCEPTER PVC
FITTINGS

Size

EPR Kit for Conduit Repair
EPR Kits from IPEX are the first total
repair systems for broken and damaged
PVC conduit. They offer fast and easy
repairs for damaged conduit caused by
actions such as earth excavation,
horizontal and core drilling.
All sizes are 24 inches in length.

Primer
C100PT5

500ml

074306

C100PT

1L

074307

C100QT

074308

Average # of Joints per Pint or Quart of Cement
Nominal Pipe
Size

# of
Joints

# of
Joints

Nominal Pipe
Size

# of
Joints

# of
Joints

inches

mm

/Pint

/Quart

inches

mm

/Pint

/Quart

1/2

12

350

700

2-1/2

12

40

80

3/4

19

200

400

3

19

35

70

1

25

150

300

3-1/2

25

30

60

1-1/4

32

110

220

4

32

24

48

1-1/2

38

80

160

5

38

10

20

2

50

45

90

6

50

8

16

Part Number

Product Code

1-1/4

EPR25

077976

1-1/2

EPR30

077971

2

EPR35

077972

2-1/2

EPR40

077973

3

EPR45

077974

4

EPR55

077975

5

EPR60

077977

6

EPR65

077979

EPR Kit Adapters for Duct
Repair
EPR Conduit Repair Kits allow contractors
to repair a broken section of DB-II duct
while leaving the cables inside. The Adapters are pre-cut allowing
each to open around existing cabling and are then solvent cemented
onto the outside diameter of the broken duct. Using standard PVC
solvent cement, an EPR Kit is then easily assembled and connected to
the Adapters, restoring the duct to its original form.
Size (in)

Part Number

Product Code

2

EPRA35

077852

3

EPRA45

077853

4

EPRA55

077854

5

EPRA60

077855

6

EPRA65

077856

CONDUIT REPAIR KIT

250ml

Size (in)

SCEPTALIGHT

Bookmark Our New Website
www.ipexelectrical.com

TM

45

SCEPTALIGHT: The Light That Lasts

Sceptalight fixtures from IPEX prove themselves to be all-round
performers in a variety of indoor and outdoor applications.

PRODUCT INFO,
TECHNICAL
DOCUMENTS,
ONLINE TRAINING
& MUCH MORE ...

Sceptalight's thermoplastic construction offers outstanding corrosion
and chemical resistance. And its interior and exterior silicone gaskets
create a watertight seal, the reason it performs equally well indoors
and outside.

Features and Benefits
• Stable Construction
• Watertight seal with weather-resistant silicone gaskets
• Corrosion Resistant
• Durable and Impact Resistant

OUR SCEPTER ELECTRICAL
CATALOGUE & ELECTRICAL
POCKET PRO INCLUDE MORE
INFORMATION ON:
• Conduit & Fittings
• Light Fixtures
• ENT Tubing & Fittings

Mounting Options
CEILING MOUNT

WALL MOUNT

Box with four 3/4"
threaded hubs and
integral mounting feet.

Box with four 3/4"
threaded hubs, 90º wall
bracket and integral
mounting feet.

PENDANT MOUNT

• Duct
• Trenchless Raceways
• and much more ...

available at www.ipexelectrical.com

Pendant cap with
3/4" threaded hub
and a locking set
screw.

SCEPTALIGHT

Sceptalight fixtures are made from a glass-reinforced thermoplastic
polyester resin, which enable them to stand up better to corrosive
elements than metal. This thermoplastic design marries an unrivaled
balance of strength, stiffness and toughness with all the benefits
users appreciate of Scepter rigid PVC conduit and fittings - long life,
easy servicing and high impact-resistance.

46

SCEPTALIGHT

SCEPTALIGHT

TM

Globe Options

Wet Locations

Sceptalight offers a variety of globe options to suit a wide range of
applications and environments. Our standard clear glass globes are
ideal for general purpose area lighting for either indoor or outdoor use.
Polycarbonate globes offer impact resistance in case of accidental
contact and the assurance that work areas are not contaminated by
broken glass. Coloured globes - available in red, blue, green or amber can transform the light to an indicator or warning light.

C22.2 No. 250
UL 1598

Ceiling Mount
4 3/4"

Ceiling Mount

Ceiling Mount

Heat-treated
Blue Glass

Heat-treated
Green Glass

Heat-treated
Amber Glass

Light Options
Fluorescents
Our compact fluorescent fixtures work four to five times more
efficiently per watt than incandescents and provide 10-20 times the
lamp life, yet use approximately 75% less energy. In this way,
Sceptalight fluorescents lower energy and maintenance costs without
sacrificing light levels.

Incandescents
With their low initial cost, Sceptalight incandescent fixtures make
the most practical choice to meet the daily needs of commercial,
industrial, marine and agricultural applications. Our incandescents
are ideal for short burn times as well as flashing and dimming
applications.

Ceiling Mount
Polycarbonate Globe

Part
Number

Product
Code

150W

Incandescent

LVPF150C

077225

150W

Incandescent less guard

LVPF150LG

077237

26W

Compact Fluorescent

LVPL26C

077170

18W

Compact Fluorescent

LVPL18C

077210

13W

Compact Fluorescent

LVPL13C

077122

9W

Compact Fluorescent

LVPL9C

077121

7W

Compact Fluorescent

LVPL7C

077120

Part
Number

Product
Code

Ceiling Mount with Clear Polycarbonate
Glass Globe (no guard)
26W

Compact Fluorescent

LVPL26PCC

077176

18W

Compact Fluorescent

LVPL18PCC

077211

13W

Compact Fluorescent

LVPL13PCC

077165

9W

Compact Fluorescent

LVPL9PCC

077155

7W

Compact Fluorescent

LVPL7PCC

077145

SCEPTALIGHT

SCEPTALIGHT

Heat-treated
Red Glass

9 1/2"

10"

Ceiling Mount
with Standard Clear Glass Globe
Standard or Heat-treated
Clear Glass

6"

4 3/4"

11 3/4"

Clear
Polycarbonate

47

TM

48

SCEPTALIGHT

SCEPTALIGHT

TM

Pendant Mount

Hazardous
Locations

4 3/4"

4 3/4"

49

TM

Class I, Div 2 Groups A, B, C & D
Class II, Div 2 Groups F & G

Ceiling Mount
10 1/4"

12"

Part
Number

Product
Code

150W Incandescent clear

LVPF150HRC-HAZ

077414

Part
Number

Product
Code

150W Incandescent red

LVPF150HRR-HAZ

077415

150W Incandescent blue

LVPF150HRB-HAZ

077416

150W

Incandescent

LPMF150C

077231

150W Incandescent green

LVPF150HRG-HAZ

077417

26W

Compact Fluorescent

LPPL26C

077184

150W Incandescent amber

18W

Compact Fluorescent

LPPL18C

077212

13W

Compact Fluorescent

LPPL13C

077185

9W

Compact Fluorescent

LPPL9C

077183

7W

Compact Fluorescent

LPPL7C

077182

Pendant Mount with Clear
Polycarbonate Globe (no guard)

Part
Number

Product
Code

LVPF150HRA-HAZ

077494

26W Compact Fluorescent clear

LVPL26HRC-HAZ

077377

26W Compact Fluorescent red

LVPL26HRR-HAZ

077378
077379

26W Compact Fluorescent blue

LVPL26HRB-HAZ

26W Compact Fluorescent green

LVPL26HRG-HAZ

077399

26W Compact Fluorescent amber

LVPL26HRA-HAZ

077400

26W

Compact Fluorescent

LPPL26PCC

077375

18W Compact Fluorescent clear

LVPL18HRC-HAZ

077347

18W

Compact Fluorescent

LPPL18PCC

077273

18W Compact Fluorescent red

LVPL18HRR-HAZ

077348

13W

Compact Fluorescent

LPPL13PCC

077365

18W Compact Fluorescent blue

LVPL18HRB-HAZ

077349

9W

Compact Fluorescent

LPPL9PCC

077355

18W Compact Fluorescent green

LVPL18HRG-HAZ

077353

7W

Compact Fluorescent

LPPL7PCC

077345

18W Compact Fluorescent amber

LVPL18HRA-HAZ

077354

Pendant Mount

Wall Mount

Pendant Mount
with Heat Resistant Glass Globe

7 1/4"

2 7/8"

13 1/4"

Part
Number

Product
Code

For wall mount fixtures select and order the
appropriate style (wattage and globe) ceiling
LWB150
mount fixture from above and add LWB150
Wall Mount bracket

077233

Description

Part
Number

Product
Code

150W Incandescent clear

LPMF150HRC-HAZ

077495

150W Incandescent red

LPMF150HRR-HAZ

077496

26W Compact Fluorescent clear

LPPL26HRC-HAZ

077407

26W Compact Fluorescent red

LPPL26HRR-HAZ

077409

18W Compact Fluorescent clear

LPPL18HRC-HAZ

077500

18W Compact Fluorescent red

LPPL18HRR-HAZ

077498

Part
Number

Product
Code

For wall mount fixtures select and order the
appropriate style (wattage and globe) ceiling
LWB150
mount fixture from above and add LWB150
Wall Mount bracket

077233

Wall Mount
Description

SCEPTALIGHT

SCEPTALIGHT

Pendant Mount
with Standard Clear Glass Globe

Ceiling Mount
with Heat Resistant Glass Globe

50

SCEPTALIGHT

SCEPTALIGHT

TM

Nonmetallic Utility Light Fixture
LVPE150-PCC

LVPE150

51

TM

Accessories & Components
*
5 1/8"

5 1/8"

Standard Glass Globes
3 1/2"

9 7/8"

Part
Number

Hub Product
Size Code

LVPE150-10/15

1

Fixture c/w Clear Polycarbonate Globe
Fixture c/w Heat Resistant Clear Globe

LVPE150-PCC*
LVPE150-HRC

1

Fixture c/w Heat Resistant Red Globe

LVPE150-HRR

1

Fixture c/w Heat Resistant Blue Globe

LVPE150-HRB

1

Fixture c/w Heat Resistant Green Globe

LVPE150-HRG

1

Fixture c/w Heat Resistant Amber Globe

LVPE150-HRA

1

Nonmetallic Clamp-on Guard
Fixture c/w Clear Glass Globe
& Clamp-on guard

Clear

LGC150

077247

Heat Resistant Globes

LVPE150-1015G

Fixture c/w Clear Glass Globe

Replacement Clear Glass Globe

Product Code

/2"-3/4" 077493
/2"-3/4" 077181
/2"-3/4" 077578

1

/2"-3/4" 077599
/2"-3/4" 077579
/2"-3/4" 077597
/2"-3/4" 077598

LGC150

Description

Part Number

Product Code

Clear

LG150T

077909

Red

LCGR150T

077239

Blue

LCGB150T

077910

Green

LCGG150T

077241

Amber

LCGA150T

077242

Polycarbonate Globes

(for use with
compact fluorescent or maximum 60W incandescent lamp)
Description

Part Number

Product Code

Clear

LPCC18

077911

Red

LPCR18

077912

Blue

LPCB18

077913

Green

LPCG18

077914

Amber

LPCA18

077915

077247

LVPUG150

077558

LVPE150-1015G /2"- /4" 077402
1

Threaded Junction Boxes

3

* Maximum 60W incandescent lamp with polycarbonate globe

Part Number

Product Code

LFB150C

077250

LFB150T *

077251

*LFB150T complete with 1/2 threaded"
hole in center of cover

SCEPTALIGHT

Description

Part Number

11

SCEPTALIGHT

LVPUG150

Description

52

SCEPTALIGHT

COR-LINE ® ENT & KWIKON ® FITTINGS

TM

53

Accessories & Components con’t
Fixture Components (LVPF, LVPL, LPMF, LPPL)
Description

Part Number Product Code

Ceiling Mount Box

LVPB 150

077243

Pendant Mount Cap

LPC 150

077246

90 Wall Bracket

LWB 150

077233

Socket Base Assembly

LSBA 150

077245

Medium Base Replacement Socket

LSOC 150

077249

Screw-on Guard

LVPG 150

077978

Replacement Lamps

SCEPTALIGHT

Description

Part Number

Product Code

7 Watt

LD/E 7

072841

9 Watt

LD/E 9

072844

13 Watt

LD/E 13

072847

18 Watt (Quad)

LD/E 18

077947

26 Watt (Quad)

LD/E 26

077081

Cor-Line ENT – Savings for the Long Run

Description

Part Number

Product Code

7/9 Watt Lamp Holder

LLH 7/9

072843

13 Watt Lamp Holder

LLH 13

072849

18 Watt Lamp Holder (4 Pin)

LLH 18

072818

26 Watt Lamp Holder (4 Pin)

LLH 26

077082

Noncorroding and nonconducting, Cor-Line Electrical Nonmetallic
Tubing and fittings are designed For The Long Run. Coiled in
lengths up to 1,500 feet, the Cor-Line system can span the longest
run. Encased in concrete, concealed in walls or ceilings, Cor-Line
offers the best alternative to the labour-intensive, 10' lengths of
metal conduit with its couplings and scrap. The Cor-Line System is
the right choice!

Kwikon Fittings

Ballasts
Description

Part Number

Product Code

7/9 Watt Magnetic Ballast (NPF)

LEB 7/9

072842

13 Watt Magnetic Ballast (NPF)

LEB 13

072848

18 Watt Electronic Ballast (HPF)

LEB 18

077224

26 Watt Electronic Ballast (HPF)

LEB 26

077080

Our unique Kwikon couplings, transition couplings and connectors are
designed with six 360° locking tabs to ensure a secure concrete-tight
connection.
Time-consuming taping and solvent cementing are eliminated.

Gaskets
Description

Part Number

Product Code

Box Gasket

LBGASK 150

072820

Lamp Gasket

LLGASK 150

076971

C22.2 – No. 227.1

CORLINE ENT &
KIWKON FITTINGS

Replacement Lamp Holders

54

COR-LINE ® ENT & KWIKON ® FITTINGS

COR-LINE ® ENT & KWIKON ® FITTINGS

Ease of Installation

Pulling Wire

Engineered for the rugged day-to-day
challenges of the construction industry,
Cor-Line has already established itself as a
market leader. Requiring no special tools for
bending or cutting, Cor-Line is easily installed.

Kwikon’s interior corrugated surface greatly
reduces the amount of friction while pulling
conductors through long runs, even with 90°
bends.

55

CSA Certified
Bending & Cutting
Cor-Line’s corrugated construction allows it
to be easily bent by hand, no longer
requiring special bending equipment
traditionally required with metal conduit
systems. When bending, ensure the radius of
the curve is at least six times the internal
diameter of the tubing.

Pre-Assembly of Kwikon Slab
Boxes

Pre-Assembly of Metallic
Boxes

FT-4 Approved
IPEX Cor-Line ENT tubing meets and
exceeds the requirements of CSA’s vertical
char test as described in Clause 4.11.4 of
CSA C22.2 No. 0.3M.

Direct Burial
The Canadian Electrical Code approves ENT for direct earth burial.
Rules governing installation of Cor-Line ENT are covered in the CEC
Part 1, Rule 12-1500 through 12-1516.

Installation in Noncombustible/Combustible
Construction

Metallic slab boxes can be quickly preassembled with Kwikon connectors.
Secured with a locknut, Kwikon connectors
provide a concrete-tight connection.

Refer to Section 3.1.5.19 of the National
Building Code for rules governing the use of
combustible conduit in noncombustible and/or
combustible buildings. Where provincial codes
vary, please consult with the building
authority having jurisdiction.

Installation in Sheer Walls,
Interior Walls & Block Walls

Nonmetallic Raceways for
Fire Alarm System Conductors

Cor-Line’s flexibility, lightweight and ease of
handling in metal, wood, or block walls,
combined with Kwikon connectors and
couplings, substantially reduce time and
labour needed to install electrical raceways.

Rule 32-102 of the CEC allows Cor-Line
ENT to be used for fire alarm systems in
noncombustible or combustible buildings
provided: (1) the raceway is embedded in at
least 50mm (2 in.) of masonry or poured
concrete, and (2) where electrical
nonmetallic tubing (ENT) is used, the
transition from ENT to metal raceways is made in the concrete
using a transition fitting or other acceptable means. (Kwikon
transition fittings are specifically designed for this application.)

CORLINE ENT &
KIWKON FITTINGS

CORLINE ENT &
KIWKON FITTINGS

IPEX’s Kwikon slab boxes are available with or
without molded connectors. For boxes without
molded connectors, pre-assembly is quick and
simple using our snap-in connector or
threaded male adapter with locknuts. Both
provide a secure concrete-tight connection.

Cor-Line Electrical nonmetallic tubing and
Kwikon fittings are certified to CSA C22.2
No. 227.1.

COR-LINE ® ENT

56

Reel & Coil Size
Size (in)
1/2

Coil

Reel

3/4

57

KWIKON ® ENT FITTINGS

Kwikon Coupling

Length (ft)

Product Code

1500

Weight lbs/pkg

Size (in)

Part Number

Product Code

Package Qty

185

1/2

KC10

089000

150

145

3/4

KC15

089001

100

KC20

089002

50

012004

1000

012009

1

750

012019

155

1

1-1/4

1000

012047

205

1-1/4

KC25

189670

30

1-1/2

750

012033

180

1-1/2

KC30

189671

30

2

500

012044

160

2

KC35

189672

20

1/2

370

012000

37

3/4

240

012008

30

1

160

012018

28

1-1/4

500

012046

102

1-1/2

300

012032

72

2

225

012043

62

Kwikon Connector For
Concrete Encasement
Size (in)

Part Number

Product Code

Package Qty

1/2

KTA10

089006

150

3/4

KTA15

089007

100

1

KTA20

089008

50

1-1/4

KTA25

189680

30

Wrapped in plastic, coils are easily dispensed from the centre.

Size (in)

Length (ft)

Product Code

Weight lbs/pkg

1/2 x 10'

3600

012005

345

1-1/2

KTA30

189681

30

3/4 x 10'

2200

012006

315

2

KTA35

189682

20

1 x 10'

1800

012007

345

Cor-Line Dimensions

CORLINE ENT &
KIWKON FITTINGS

CORLINE ENT &
KIWKON FITTINGS

10' Sticks

Kwikon Snap-in Connector

Size (in)

ID (in)

OD (in)

1/2

0.574

0.840

Size (in)

Part Number

Product Code

Package Qty

3/4

0.778

1.050

1/2

KTS10

089146

150

1

1.000

1.315

3/4

KTS15

089147

100

1-1/4

1.340

1.660

1

KTS20

089148

50

1-1/2

1.574

1.900

2

2.020

2.375

Kwikon Transition Coupling
Weight Comparison of Cor-Line ENT vs EMT
Size (in)

ENT lbs/1000'

EMT lbs/1000'

1/2

100

295

3/4

125

440

1

175

668

1-1/4

185

970

1-1/2

220

1,100

2

319

1,517
CSA C22.2
No. 227.1

Size (in)

Part Number

Product Code

Package Qty

1/2

KTC10

089012

125

3/4

KTC15

089013

100

1

KTC20

089014

50

58

59

KWIKON ® ENT FITTINGS

KWIKON ® ENT FITTINGS

Kwikon 90o Stub Down Fittings

Kwikon Slab Box
Engineered to be rugged and durable, IPEX’s boxes will withstand
construction’s harshest environments.

KT90 Stub Down Fittings
(Kwikon x Threaded)
Size (in)

Part Number

Product Code

Package Qty

1/2

KT90-10

089060

40

3/4

KT90-15

089059

35

1

KT90-20

089058

25

KK90 Stub Down Fittings
(Kwikon x Kwikon)
Size (in)

Part Number

Product Code

Package Qty

1/2

KK90-10

089055

40

3/4

KK90-15

089056

35

1

KK90-20

089057

25

Features
• Approved for use with ceiling fans up to 35 lbs. and luminaries
up to 50 lbs.
• Concrete tight
• All molded connectors have 360° locking tabs that exceed CSA and
UL requirements for pull-out
• Molded connectors are also approved for use with Scepter Rigid
PVC Conduit
• Manufactured from high impact PVC
• Nonmetallic / Nonconducting / Noncorroding
• Threaded brass inserts

Slab Box w/ Molded Connectors

Size (in)

Part Number

Product Code

Package Qty

1/2

KSTB-10

089330

150

Hub Size (in)

Part Number

Product Code

Package Qty

3/4

KSTB-15

089331

150

8 x 1/2

SMB-H-10

089455

25

1

KSTB-20

089332

150

4 x 1/2, 2 x 3/4, 2 x 1

SMB-H-10/20

089456

25

1-1/4

KSTB-25

089333

150

4 x 1/2, 4 x 3/4

SMB-H-10/15

089457

25

8 x 3/4

SMB-H-15

089459

25

4 x 3/4, 4 x 1

SMB-H-15/20

089463

25

Kwikon ENT Multi-LinkTM
Form Stubby
Size (in)

Part Number

Product Code

Package Qty

1/2

MSTB-10

089031

75

3/4

MSTB-15

089026

75

1

MSTB-20

089025

50

Slab Box w/o Molded Connectors
Knockout Size (in)

Part Number

Product Code

Package Qty

8 x 1/2

SMB-10

089450

25

4 x 1/2, 2 x 3/4, 2 x 1

SMB-10/20

089451

25

Kwikon ENT Angled Form Stubby
Slab Box Extension Ring

Size (in)

Part Number

Product Code

Package Qty

1/2

KASTB-10

089233

50

3/4

KASTB-15

089234

50

Part
Number

Product
Code

Standard Packaging

SMBR

089494

20

1

KASTB-20

089235

50

1-1/4

KASTB-25

089236

50

1-1/2

KASTB-30

089238

50

Adjusts height of SMB/SMBH series slab boxes by 1"

CORLINE ENT &
KIWKON FITTINGS

CORLINE ENT &
KIWKON FITTINGS

Kwikon ENT Form Stubby

Designed by contractors for contractors, Kwikon slab boxes are available
in two unique styles, with or without molded connectors. Now you can
provide a complete, nonmetallic slab system. Priced competitively with
traditional steel mud boxes, Kwikon slab boxes increase labour
efficiencies, reducing costs.

60

61

KWIKON ® ENT FITTINGS

KWIKON ® ENT FITTINGS

4" Square Slab Box
Hub Size (in)

Part Number

Product Code

Package Qty

8 x 1/2

SSBH-10

089452

25

8 x 3/4

SSBH-15

089453

25

4 x 1/2 & 4 x 3/4

SSBH-10/15

089454

25

The NEW ENT Support Unit (ESU)
raises the tubing or conduit up off the concrete form
during the concrete pour maintaining a level raceway
and allows for maximum aggregate flow and concrete
consolidation.
Easy to use, the ESU snaps around any size of ENT.
It is perfect for use in high rise buildings constructed with post-tensioned
(PT) concrete slabs.

Features
Shallow Slab Box
Hub Size (in)

Part Number

8 x 1/2

SMBS-H-10

Product Code Package Qty
089485

20

4 x 1/2 & 4 x 3/4

SMBS-H-10/15

089486

20

8 x 3/4"

SMBS-H-15

089487

20

4 x 1/2, 2 x 3/4, 2 x 1

SMBS-H-10/20

089488

20

4 x 3/4 & 4 x 1

SMBS-H-15/20

089489

20

•
•
•
•
•

Part Number

Product Code

ESU-10-35

089149

One size fits all 1/2" - 2"
Saves time and labour
Easy locking mechanism
Securable to the concrete form
Minimal footprint reduces amount of surface contact

Accessories
•
•
•
•

Fully assembled and installation ready
Perfectly suited for deep or shallow construction preferences
Concrete-tight poly film covering the box opening
Kwikon hubs do not protrude inside the box

Kwikon Concrete 3-1/2"
Deep Concrete Wall Box

ENT 4" Square Box Flat Cover
Size (in)

Part Number

Product Code

1/2 KO

KWBC-10

089500

Tapered Plugs

Hub Size (in)

Part Number

Product Code

Size (in)

Part Number

Product Code

Package Qty

4 x 1/2, 4 x 3/4

SVDB-H-10/15

089496

1/2

TP10

089003

100

4 x 3/4, 4 x 1

SVDB-H-15/20

089049

3/4

TP15

089004

100

4 x 1/2, 2 x 3/4, 2 x 1

SVDB-H-10/20

089052

1

TP20

089005

100

8 x 3/4

SVDB-H-15

089065

Kwikon Cutter & Blades
Kwikon 2" Shallow
Concrete Wall Box

Description

Part Number

Product Code

Cutter (1/2"- 1")

CLC20

089066

Hub Size (in)

Part Number

Product Code

Blades for CLC20

SSB

089067

4 x 1/2

SVSB-H-10

089054

Cutter (1/2"- 2")

CLC35

089068

4 x 3/4

SVSB-H-15

089053

Blades for CLC35

SB35

089069

CORLINE ENT &
KIWKON FITTINGS

CORLINE ENT &
KIWKON FITTINGS

Concrete Wall Boxes

SUPER DUCT ® PIPE & FITTINGS

63

Visit our website:
www.ipexelectrical.com

PRODUCT INFO
TECHNICAL DOCUMENTS

ONLINE TRAINING
&

MUCH MORE ...

Super Duct Pipe and Fittings
Super Duct is recognized by major utilities, contractors and engineering
firms as the premier ducting product available on the market.

Rigid Super Duct (Type DB-2) conforms to the testing requirements of
CSA Standard C22.2 No. 211.1 both for encasement in
concrete/masonry and for direct burial.

+

DOWNLOAD
OUR SCEPTER ELECTRICAL
CATALOGUE OR OUR
ELECTRICAL POCKET PRO

CSA C22.2
No. 211.1

SUPERDUCT

Super Duct is manufactured with a specialized compound and
engineered for high impact and crush strength specifically required by
utilities for underground duct. This compound enhances the friction
coefficient of Super Duct for easier pulling of conductors/wires
through long runs.

64

65

INSTALLATION

ENGINEERING DATA

Lightweight

Field Bending

Super Duct is easy to carry and
install, reducing labour and costs.

The natural flexibility of IPEX Super Duct allows field bending, so
minor changes in elevation or direction can often be accommodated
without the use of special sweeps or fittings. The following table
indicates typical maximum offset bends that can be achieved by
“cold bending.”

Long Lengths
Super Duct is available in 10' and
20' lengths, minimizing the
number of connections needed.

Allowable Offset for Super Duct

Bell Ends
Super Duct is bell-ended, allowing
for easy assembly in the field.

Offset

High Compressive
Strength
Super Duct’s specially formulated compound is designed to withstand
high loads.

Low Coefficient of Friction

Max Allowable Offset
20' Length

in.

mm

in.

mm

in.

mm

2

50

20

508

79

2 007

3

75

14

356

56

1 422

3-1/2

90

12

305

49

1 245

4

100

11

279

43

1 092

Quality Control

5

125

7

178

35

889

Stringent, continuous testing ensures that Super Duct is a consistently
high quality product.

6

150

7

178

29

737

The smooth bore of Super Duct facilitates cable pulling and eliminates
costly cable damage.

CORLINE ENT &
KIWKON FITTINGS

Max Allowable Offset
10' Length

Size

NOTES:

Description

CSA Requirements

Reference

Pipe Stiffness @ 5%

43.5 psi (300 kPa)

CSA C22.2 No. 211.1

Crush Resistance

198 lbs. @ 73°F (90 kg @ 23°C)
CSA C22.2 No. 211.1
10% max. residual deflection

Impact Resistance

45 ft. lbf @ 73°F (61J @ 23°C)
CSA C22.2 No. 211.1
25 ft. lbf @ 0°F (34J @ -18°C)

Residual Stress

149°F (65°C) for 4 hours.
Allow to cool to 73°F (23°C).
0.5% shrinkage allowed.

Joint Tightness

5 psi (35 kPa) internal water
CSA C22.2 No. 211.1
pressure applied for 24 hours.

Note: Super Duct meets or exceeds all CSA requirements.

CSA C22.2 No. 211.1

Axial deflection should not be attempted at the joints.

2.

The above values were established for ambient temperatures
above the freezing point. Increased radii may be desirable at
below-freezing temperatures.

SUPERDUCT

Super Duct (Type DB-2)

1.

INSTALLATION

66

INSTALLATION

Bends

Concrete Encased Duct Installation

Standard 90°, 45° and 22 1/2° bends are available from sizes 2"
through to 6" in 24", 36", 42" and 60" radius. All bends are supplied
with 6" (15.2cm) tangents. The centre line lay length (L) can be
calculated using;

For multipurpose power cable and communication duct banks,
spacing between ducts is critical for optimum performance. IPEX
has designed the Monobloc and Vertical Lok
Spacer systems to accommodate all
specification and field installations.

L =
Where:

§
(π r x 180
) + 2 (tangent)

These light weight spacers provide the vertical
and horizontal separation required in a trench.

π = 3.14
L

= centre line lay length

r = radius of bend
§ = angle of bend
tangent = 6"
Example: for a 3" 90° bend with a 36" radius - calculate the lay length:
L =

90°
(3.14 x 36 x 180°
) + 2 (6)

L = 69 inches
L (metres) =

With spacers in place on the trench bottom,
lay the first tier of ducts. When using a
concrete base, lay the bottom tier before the
base has taken initial set. Place subsequent
tiers of spacers on top of the tier until the
required number of ducts are installed. Then
tie the entire assembly together. It is not
necessary to weight or brace the bank unless
the concrete mix is very wet.

The Concrete Pour

L imperial = 69" = 1.75m

12 x 3.281

67

Do not allow a heavy mass of concrete to fall directly onto the duct. If
this is a possibility, use a plank to direct the concrete down the sides
of the bank assembly to the trench bottom. The concrete will flow to
the centre of the bank and rise up in the middle, uniformly filling all
open spaces. Voids can be eliminated by carefully working a long, flat
slicing bar or spatula up and down between the vertical rows of ducts.
Concrete should then flow between and under all of the ducts.

39.37

Duct Bank Elevation
45°

Monobloc spacers should be staggered. It is recommended that
spacers be located approximately one-fifth of duct length from each
end. Vertical Lok spacers should be located to a maximum of every
5.5 ft. (1.7m).

221/2°

Static Friction Coefficient
Ducting Materials PVC
RTRC
.0

.1

.2

.3

.4

.5

.6

.7

.8

Backfilling
Backfill with regular excavated soil after the concrete has set.

SUPERDUCT

SUPERDUCT

90°

INSTALLATION

68

INSTALLATION

Concrete Encased Tier-by-Tier
Installation

Direct Burial Installation

The advantage of this method is the production
of a solid, void-free concrete envelope. Simply
pour each tier independently.

Trench Bottom

Trench Bottom

Cross-section of
tier-by-tier method.

After grading the trench, place a foundation of
3" of concrete on the bottom. It should be
smooth and graded.

69

The trench bottom should provide a
continuous, firm and uniform support for the
duct bank construction. Care should be
taken to avoid lumps, ridges, depressions
and stones causing “point” contacts or
uneven bearing.

Rock or Shale
Bank Assembly
Lay the bottom tier of ducts on the
concrete base. Ducts should be spaced with
wooden combs (two per duct length).
Concrete the first tier level to the top of the
comb. Remove combs and fill the voids.
Type of wood comb used.
Light tamping will ensure an even surface.
Repeat this sequence until the bank is built up.

Excavate 3" below the desired depth and bring the trench back to
grade with selected tamped soil. This will provide the duct with a
uniform bedding surface.

Unstable Soils
Tests should be conducted to establish the soil strength in marshy or
swampy areas. It may be necessary in these conditions to dig deeper
and refill with crushed stone or gravel, or to employ mats, timbers or a
concrete base.

Concreting
If the concrete is allowed to set before assembling the next tier, the
concrete will be stronger and more dense and the ducts will be
aligned straighter. One problem with this method is that the bank will
be in a series of layers and therefore more likely to heave and
separate under frost conditions. If successive tiers are laid before the
concrete has set, a satisfactory bond will be achieved by tamping the
dry concrete.

After the first tier of ducts is installed, backfill and compact as
outlined below. If wood combs are employed for spacing, remove them
as the backfill is placed and tamped. Then begin the next tier.

Initial Backfilling
1. Fit side and centre to the top of the ducts. Use a hand tamper only
to tamp firmly.

Backfilling

2. Backfill over the duct to the required thickness (see note) and
tamp firmly, using only a hand tamper.

Backfill with regular excavated soil when the bank is complete.
100'
100'
100'
100'
100'

Duct is usually laid in 100' sections once the trench is excavated.
Therefore, concreting can be a continuous process.

Final Backfilling
When the last tier is placed, hand-place the backfill to 4" over the
duct with soil that does not contain stones larger than 3/8". Handtamping of this layer is optional, depending on the specifications.
From this point, backfill may be completed by hand or by pneumatic
tamping in layers from 4" to 12" depending on the degree of
compaction desired.
When placing backfill by machine, avoid the use of large rocks until a
protective layer (minimum of 12") is established.
Note: In direct burial, no spacer should be used with Type 2; spacers provide “point” support
instead of the continuous bed required. Backfill thickness between ducts is usually 2" to 3".

SUPERDUCT

SUPERDUCT

Placement of Duct

70

SUPER DUCT ® FITTINGS

SUPER DUCT ® PIPE

CSA Type II

PVC Coupling - Solvent Weld

Dimension 10' L Belled
Ft/Crate
(in)
Product Code
2

008220

3

008230

3-1/2

008235

4

008240

5

008250

6

71

008260

2,460
1,120
810
630
430
280

20' L Belled
Weight/100'
Ft/Crate
Product Code
(lbs)
08221
08231
08236
08241
08251
08261

4,920
2,240
1,620
1,260
860
560

Dimension (in)

Part Number

Product Code

33.7

2

SWC020

029001

61.2

2 (long)

SWC020L

029009

77.3

3

SWC030

029002

99.2

3-1/2

SWC035

029003

159.6

4

SWC040

029004

226.6

5

SWC050

029005

6

SWC060

029006

CSA Type II Split Duct
Dimension (in)

Product Code

Ft/Crate

Weight/100' (lbs)

2

008222

2,460

33.7

3

008232

1,120

61.2

3-1/2

008237

810

77.3

4

008242

630

99.2

5

008252

430

159.6

6

008262

280

226.6

Polyethylene Coupling – Push Fit
Dimension (in)

Part Number

Product Code

2

PFC020

029011

3

PFC030

029012

3-1/2

PFC035

029013

4

PFC040

029014

5

PFC050

029015

6

PFC060

029016

Duct Diameter

Minimum ID

Nominal Wall

Average OD

2

2.001

.082

2.250

3

3.000

.097

3.250

3-1/2

3.480

.109

3.730

4

3.941

.120

4.216

5

4.974

.153

5.299

6

5.896

.180

6.275

PVC 5° Coupling – Solvent Weld
Dimension (in)

Part Number

Product Code

2
3

5ACS20
5ACS30

029041
029042

3-1/2
4
5
6

5ACS35
5ACS40
5ACS50
5ACS60

029043
029044
029045
029046

Super Duct Dimensions in Millimetres
Duct Diameter

Minimum ID

Nominal Wall

Average OD

50

50.83

2.08

57.15

75

76.20

2.46

82.55

Dimension (in)

Part Number

Product Code

90

88.39

2.77

94.74

3

5APF30

029030

100

100.10

3.05

107.09

3-1/2

5APF35

029502

125

126.34

3.89

134.60

4

5APF40

029998

150

149.76

4.57

159.39

5

5APF50

029050

Polyethylene 5° Coupling – Push Fit

SUPERDUCT

SUPERDUCT

Super Duct Dimensions in Inches

72

SUPER DUCT ® FITTINGS

73

SUPER DUCT ® FITTINGS

Expansion Joint

Terminator with Knock-Out Plugs

Dimension (in)

Part Number

Product Code

Dimension (in)

Part Number

Product Code

2

EXPJ20

029151

3

TERM30

029826

3

EXPJ30

029152

3 1/2

TERM35

029523

3-1/2

EXPJ35

029153

4 (with holes)

TERM40H

029822

4

EXPJ40

029154

4 (no holes)

TERM40W

029827

Reducer Coupling – Solvent Weld

Cap – Solvent Weld

Dimension (in)

Part Number

Product Code

3x2

RC3020

029021

3-1/2 x 2

RC3520

029039

3-1/2 x 3

RC3530

029022

4x2

RC4020

029023

4x3

RC4030

029024

4 x 3-1/2

RC4035

029025

5x4

RC5040

029026

6x4

RC6040

029027

Dimension (in)

Part Number

Product Code

2

SWCA20

029071

3

SWCA30

029072

3-1/2

SWCA35

029073

4

SWCA40

029074

5

SWCA50

029075

6

SWCA60

029076

90° Long Sweep Bend
Dimension (in)

Part Number

Product Code

2 x 24 R

902024

029091

Dimension (in)

Part Number

Product Code

2 x 36 R

902036

029092

2

SPLY20

029051

2 x 60 R

902060

029036

3

SPLY30

029052

3 x 24 R

903024

029055

3-1/2

SPLY35

029053

3 x 36 R

903036

029093

4

SPLY40

029054

3 x 60 R

903060

029134

3-1/2 x 24 R

903524

029123

3-1/2 x 36 R

903536

029094

3-1/2 x 60 R

903560

029135

4 x 24 R

904024

029047

4 x 36 R

904036

029095

4 x 60 R

904060

029096

5 x 42 R

905042

029097

5 x 60 R

905060

029037

6 x 60 R

906060

029098

PVC Bell Ends
Dimension (in)

Part Number

Product Code

2

BELL20

029061

3

BELL30

029062

3-1/2

BELL35

029063

4

BELL40

029064

5

BELL50

029065

6

BELL60

029066

SUPERDUCT

SUPERDUCT

Split Wye – Solvent Weld

SUPER DUCT ® FITTINGS

74

75

SUPER DUCT ® FITTINGS

45° Long Sweep Bend

Universal Pipe Plug

Dimension (in)

Part Number

Product Code

Dimension (in)

Part Number

Product Code

2 x 24 R

452024

029111

2 & 2-1/2

UPP35

077433

2 x 36 R

452036

029112

3 & 3-1/2

UPP45

077434

3 x 24 R

453024

029082

4

UPP55

077435

3 x 36 R

453036

029113

5

UPP60

077436

3-1/2 x 36 R

453536

029114

6

UPP65

077437

4 x 24 R

454024

029128

4 x 36 R

454036

029115

4 x 60 R

454060

029116

5 x 42 R

455042

029117

6 x 60 R

456060

029118

Sleeve

Female Adapter

22 1/2° Long Sweep Bend

Dimension (in)

Part Number

Product Code

2

FEMA20

029141

3

FEMA30

029142

3-1/2

FEMA35

029143

Dimension (in)

Part Number

Product Code

4

FEMA40

029144

3 x 36 R

223036

029085

5

FEMA50

029145

4 x 36 R

224036

029204

6

FEMA60

029146

5 x 42 R

225042

029249

Note: Special radius bends are available upon request.

Dimension (in)

Part Number

Product Code

2

ARIG20

029181

2 (long)

ARIG20L

029188

Product Code

3

ARIG30

029182

029131

3-1/2

ARIG35

029183

029132

4

ARIG40

029184

029133

5

ARIG50

029185

6

ARIG60

029186

Tapered Plug
Dimension (in)
2
3
3-1/2

Part Number
PLUG20
PLUG30
PLUG35

Duct
Socket

4

PLUG40

029078

5

PLUG50

029079

6

PLUG60

029136

Note: Duct to RTRC Conduit Adapters are available on request.

SUPERDUCT

SUPERDUCT

Conduit to Duct Adapter

Conduit
Socket

76

Monobloc Spacer Benefits for Telephone Duct:

Reducing Adapter Coupling –
Duct to PVC Conduit

• lightweight; easy to handle
and install

Dimension (in)

Part Number

Product Code

3x2

ARIG3020

029191

4x2

ARIG4020

029192

4x3

ARIG4030

029187

PVC Adapter Coupling – Asbestos
Cement or Bituminous Fibre

• weatherproof
• resilient at extremely low
temperatures

B

• flexible, yet tough
• readily available in a wide
range of sizes and
configurations

B

• economical

D

• immune to corrosion attack

C

• approved by Bell Canada
Dimension (in)

Part Number

Product Code

3-1/2

ACFB35

029163

4

ACFB40

029164

• versatile, as they can be used as both a base & intermediate spacer

Selection Table (in inches)

(A)

Vertical
Spacing
(B)

Horizontal
Spacing
(C)

Ground
Clearance
(D)

Number of
Ways
(E)

2

1-1/2

1-1/2

3

2

3

1-1/2

1-1/2

3

2

3-1/2

1

1

2

2-3-4
1-2-3-4

Nominal Size

Vertical-Lok
Spacers
Intermediate

Base

*

*

*

4

1

1

2

4

1-1/2

1-1/2

3

2-3-4

4

2

2

3

1-2-3-4

2 x 1-1/2

IS3530

029550

BS3530

029566

4

3

3

3

2-3-4

2x2

IS3535

029551

BS3535

029567

4

3

3

4

2-3-4

2x3

IS3545

029552

BS3545

029568

4-1/2

2

2

3

1-2-3

3 x 1-1/2

IS4530

029553

BS4530

029569

5

1-1/2

2-1/8

3-5/8

1

3x2

IS4535

029554

BS4535

029570

5

1-1/2

1-1/2

3

2-3-4

3x3

IS4545

029555

BS4545

029571

4x1

IS5520

029556

BS5520

029572

4 x 1-1/2

IS5530

029557

BS5530

029573

4x2

IS5535

029558

BS5535

029574

4x3

IS5545

029559

BS5545

029575

5 x 1-1/2

IS6030

029560

BS6030

029576

5x2

IS6035

029561

BS6035

029577

5x3

IS6045

029562

BS6045

029578

6 x 1-1/2

IS6530

029563

BS6530

029579

6x2

IS6535

029564

BS6535

029580

6x3

IS6545

029565

BS6545

029581

8x2

IS8035

029294

BS8035

029293

* Do not have rebar slots or base holes

1

2

3

4

SUPERDUCT

SUPERDUCT

Dimension (in) Part Number Product Code Part Number Product Code

*

77

MONOBLOC ™ SPACERS

SUPER DUCT ® FITTINGS

78

SCEPTACON TM TRENCHLESS RACEWAY SYSTEMS

MONOBLOC ® SPACERS

79

SUPERDUCT

Monobloc Duct Spacers
Description (in)
A, B, C, D

E

Product
Code

Dimensional F length
Drawing
(in)

2 x 1-1/2 x 1-1/2 x 3

2 way

029473

2

7.9

3 x 1-1/2 x 1-1/2 x 3

2 way

029474

2

10.3

3-1/2 x 1 x 1 x 2

2 way

029860

2

12.4

3-1/2 x 1 x 1 x 2

3 way

029861

2

17.3

3-1/2 x 1 x 1 x 2

4 way

029479

2

20.9

4x1x1x2

1 way

029475

2

8.3

4x1x1x2

2 way

029476

2

13.5

4x1x1x2

3 way

029477

2

18.8

4x1x1x2

4 way

029478

2

24.2

4 x 1-1/2 x 1-1/2 x 3

2 way

029470

1

14.2

4 x 1-1/2 x 1-1/2 x 3

3 way

029471

1

20.0

4 x 1-1/2 x 1-1/2 x 3

4 way

029472

1

26.0

4x2x2x3

1 way

029480

2

8.3

4x2x2x3

2 way

029464

1

14.5

SceptaCon Trenchless Raceway Systems

4x2x2x3

3 way

029465

1

20.7

4x2x2x3

4 way

029499

1

27.0

4 x 3 x 3 x 3 (Base)

2 way

029466

3

15.0

SceptaCon is one of the first PVC systems designed for the rigors of
trenchless applications. It links seamlessly to existing PVC conduit
infrastructures and allows utility companies to standardize on PVC
throughout their entire electrical systems.

4 x 3 x 3 x 3 (Base)

3 way

029488

3

22.5

4 x 3 x 3 x 3 (Base)

4 way

029489

3

30.0

4x3x3x4

2 way

029469

1

15.0

4x3x3x4

3 way

029497

1

22.5

4x3x3x4

4 way

029498

1

30.1

4-1/2 x 2 x 2 x 3

1 way

029485

2

8.7

4-1/2 x 2 x 2 x 3

2 way

029486

2

15.5

4-1/2 x 2 x 2 x 3

3 way

029487

2

22.2

5 x 1-1/2 x 2-1/8 x 3-5/8 1 way

029455

4

7.0

2 way

029494

2

16.2

5 x 1-1/2 x 1-1/2 x 3

3 way

029495

2

23.1

5 x 1-1/2 x 1-1/2 x 3

4 way

029496

2

30.0

SceptaCon's slide-in locking system and pre-installed, pre-lubricated
gaskets allow contractors to create a water-tight seal by hand in
seconds - in all temperatures - without having to worry about solvents
or chemicals freezing or drying too quickly.
Its unique spline-lock snaps into a recessed opening, ensuring the
spline won't get snagged during pull-through. SceptaCon's rounded
bell shoulders slide easily past roots, rocks and other debris in the
borehole, ensuring a smooth, easy installation. And because
SceptaCon is made to the same high standards as our Scepter rigid
PVC conduit, contractors and electrical utilities can be assured of the
same level of quality - above ground and below.
SCEPTACON

5 x 1-1/2 x 1-1/2 x 3

TM

80

SCEPTACON TM TRENCHLESS RACEWAY SYSTEMS

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

81

No Cementing or Lubrication
SceptaCon’s slide-in locking system and preinstalled, pre-lubricated gaskets allow contractors
to create a water-tight seal by hand in seconds.

Outperforms Other PVC
Products
SceptaCon’s unique spline-lock snaps into a
recessed opening, ensuring the spline won’t
get snagged during pull-through. SceptaCon’s
rounded bell shoulders slide easily past roots,
rocks and other debris in the borehole,
ensuring a smooth, easy installation.

No Fusion Required
Because SceptaCon’s joints can be quickly
joined by hand in seconds, crews don’t need
large, expensive fusion equipment or special
training to create water-tight joints. In addition,
SceptaCon can be assembled one pipe length
at a time, then pulled underground, eliminating
the need for long strings of pipe on the job.

Kwikpath® Optical Fibre & Communication
Cable Raceway Systems

Superior Performance
SceptaCon is made from durable schedule 40 PVC that’s resistant to
creasing, scoring or flattening when pulled past obstructions in the
borehole, yet flexible enough to bend with underground twists and
turns. SceptaCon remains round, unlike HDPE which can stretch and
become oval.

Easy to Handle
SceptaCon is available in convenient 10' and 20' lengths that are
light-weight, easy to handle and no problem to work with in all types
of weather.

SCEPTACON

SceptaConTM Raceway
Length

Product Code

3" x 10'

106330

Kwikpath comes together faster and easier than other raceway
systems, thanks largely to a patented "snap-on" design that ensures
fittings and raceway assemble and terminate easily with no special
tools or handling equipment needed. The six locking tabs keep the
fitting tightly connected with tremendous pull-out resistance. All
without messy cementing or screws to tighten.
With its handy coil lengths delivered in dual purpose protective
packaging/pull box, Kwikpath makes home-run systems easy and
economical, letting you run cable from your telecommunications box
directly to a workstation outlet with fewer couplings. Being able to cut
to length on the job site ensures that you don't run short or have
wasted conduit left over.
Whether in narrow shafts or tight plenums, its lightweight and fast,
trouble-free installation make Kwikpath the number one choice for
commercial and residential cable management.

106331

Codes & Standards

4" x 10'

106340

• EIA/TIA

4" x 20'

106341

• CEC 2002/NBC

5" x 10'

106350

• NFPA

5" x 20'

106351

• Plenum FT6

6" x 10'

106360

• Riser FT4

6" x 20'

106361

• General Purpose FT1

KWIKPATH

3" x 20'

82

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

Compliance to Building
Regulations
Kwikpath meets all building regulations
and is the only fully approved raceway and
fitting combination on the market.

83

Kwikpath Plenum Raceway

NBC
CEC

A Fitting Choice
The Kwikpath fitting system reduces the
need for pulling long runs of raceway
around awkward corners and tight spaces.
And the industry first Y-Coupler reduces the
number of pull boxes required in your
system design.

Installation Friendly
Packaging
200' coils are packaged individually in
corrugated boxed cartons for ease of
handling and dispensing. Designed into the
cartons are packaging features that assist
with moving and dispensing the product. By
using the dispensing method, only the
necessary product amount is withdrawn
from the carton with the balance being
contained and easily managed.

Reduces Costs Now and
Over Long Term
Kwikpath is designed to allow easier cable
installation and removal than other careway
systems. Simply pull cables through the
raceway – no more fishing new cables
blindly through walls or ceilings. Kwikpath
also reduces renovation costs by
eliminating the need to remove existing
cabling in retrofit applications.

Protects Cable Integrity and
Performance
Kwikpath prevents cables from being
damaged on edges or snags as they’re
pulled through the raceway. Once cables
are installed, Kwikpath offers flame resisting properties and its
protective shell prevents damage to cables when renovations cause
tradesmen to enter or change the walls or ceilings.

Kwikpath Plenum is made from a UL approved compound and like
Kwikpath Riser, forms nonmetallic, flexible corrugated cable raceways.
Vibrant orange in colour, Kwikpath Plenum meets the UL tests on
flame propagation and smoke density with values well below the
standard requirements. This heat/smoke-resistance makes it an ideal
raceway to run Optical Fiber Cables (OFPN) and/or Communication
Cables (CMP/CMP-OF) through plenums and other spaces used for
environmental air. Kwikpath Plenum comes with
sequential markers every foot.

Plenum Coil with Pull Tape
Size

Length

Part Number

Product Code

3/4"

200'

KPP075TC

124020

1"

200'

KPP100TC

124011

1-1/4"

200'

KPP125TC

124012

1-1/2"

200'

KPP150TC

124013

2"

200'

KPP200TC

124014

Also available without pull tape - minimum quantity required.

Plenum Reel with Pull Tape
Size

Length

Part Number

Product Code

3/4"

1000'

KPP075TR

124021

1"

1000'

KPP100TR

124015

1"

2500'

KPP100TR48

124022

1"

5000'

KPP100TR72

124023

1-1/4"

1000'

KPP125TR

124016

1-1/4"

4000'

KPP125TR72

124024

1-1/2"

750'

KPP150TR

124017

2"

500'

KPP200TR

124018

Also available without pull tape - minimum quantity required.

KWIKPATH

KWIKPATH

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

84

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

Kwikpath Plenum Fittings

Kwikpath Riser Raceway

Kwikpath Plenum fittings are molded from approved material to be
used with Kwikpath Plenum raceway meeting all Standards requirements.

The backbone of the structured cabling syste, Kwikpath Riser is a
nonmetallic, flexible PVC corrugated product manufactured and tested
specifically for riser applications. Easily identified by its mandarin
orange color, it’s available in convenient coil
or reel packaging with squential markers
every foot.

Plenum Coupling

Size

Part Number

Product Code

3/4"

KPPC075

132650

Riser Coil with Pull Tape

1"

KPPC100

132651

Size

Length

Part Number

Product Code

1-1/4"

KPPC125

132652

3/4"

200'

KPR075TC

125026

1-1/2"

KPPC150

132653

1"

200'

KPR100TC

125011

2"

KPPC200

132654

1-1/4"

200'

KPR125TC

125012

1-1/2"

200'

KPR150TC

125013

2"

200'

KPR200TC

125014

Plenum Terminal Adapter c/w Lockout

Size

Part Number

Product Code

3/4"

KPTA075

132660

1"

KPTA100

132661

1-1/4"

KPTA125

132662

1-1/2"

KPTA150

132663

2"

KPTA200

132664

85

Also available without pull tape - minimum quantity required.

Riser Reel with Pull Tape
Size

Length

Part Number

Product Code

3/4"

1000'

KPR075TR

124027

1"

1000'

KPR100TR

125015

1"

2500'

KPR100TR48

125023

1"

5000'

KPR100TR72

125025

1-1/4"

1000'

KPR125TR

125016

1-1/4"

4000'

KPR125TR72

125024

1-1/2"

750'

KPR150TR

125017

2"

500'

KPR200TR

125018

KWIKPATH

KWIKPATH

Also available without pull tape - minimum quantity required.

86

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

Kwikpath Riser Fittings

Kwikpath Resi Raceway

Made from the same material as Kwikpath Riser Raceway.

Kwikpath Resi is a flexible raceway system
created especially for residential
communications systems, arranging and
organizing telephone, ethernet, satellite,
internet, video, security and sound cabling.

87

Riser Coupling
Resi Coil Empty
Size
3/4"
1"

Part Number
KPRC075
KPRC100

Product Code
132655
132656

1-1/4"

KPRC125

132657

1-1/2"

KPRC150

132658

2"

KPRC200

132659

Size

Length

Part Number

Product Code

3/4"

200'

KPH075C

127001

1"

200'

KPH100C

127002

1-1/4"

200'

KPH125C

127003

1-1/2"

200'

KPH150C

127004

2"

200'

KPH200C

127005

Resi Reel Empty

Riser Terminal Adapter c/w Lockout

Size

Part Number

Product Code

3/4"

KRTA075

132665

1"

KRTA100

132666

1-1/4"

KRTA125

132667

1-1/2"

KRTA150

132668

2"

KRTA200

132669

Size

Length

Part Number

Product Code

3/4"

1000'

KPH075R

127006

1"

1000'

KPH100R

127007

1-1/4"

1000'

KPH125R

127008

1-1/2"

750'

KPH150R

127009

2"

500'

KPH200R

127010

Kwikpath Resi Fittings
Kwikpath Resi couplings and terminal
adapters are available in 3/4" to 2" sizes and
are also Kwikpath Riser fittings.

KWIKPATH

KWIKPATH

Refer to Kwikpath Riser Part Numbers.

88

KWIKPATH ® COMMUNICATION RACEWAY SYSTEMS

Kwikpath Y-Coupler
The Y-Coupler is a fitting designed to allow
contractors to branch off from any size (3/4" to 2")
– new or existing – corrugated communication
raceway. Manufactured in traditional Kwikpath
vibrant orange, the Y-Coupler is ideal for use
in high-rise residential and commercial building
applications.
Size

Part Number

Product Code

3/4" to 2"

KPPY075-200

132011

Seal End Plugs
For temporary and long-term closure of raceway
ends, the insertion of sealing end plugs ensures
the raceway conduit remains clean and ready for
future needs.
Size

Part Number

Product Code

3/4"

SEP075

132000

1"

SEP100

132001

1-1/4"

SEP125

132002

1-1/2"

SEP150

132003

2"

SEP200

132004

Riser / Resi Straps

KWIKPATH

Manufactured of the same material as
Riser/RESI raceway, Kwikpath pipe straps allow
for compliance with installation requirements providing for the proper
support of Riser/RESI raceways.
Size

Part Number

Product Code

3/4"

KPS075

132006

1"

KPS100

132007

1-1/4"

KPS125

132008

1-1/2"

KPS150

132009

2"

KPS200

132010

Register your Pocket Pro today!
Fax this form to (905) 403-1124 and we’ll add
you to our mailing list.
Toll Free: (866) 473-9462

IPEX
2441 Royal Windsor Drive
Mississauga, Ontario
L5J 4C7

Fax: (905) 403-1124
Website: www.ipexelectrical.com
PLEASE PRINT

Company
Name
Title
Address
City

Province

Postal Code

Phone

ext.

Fax

Email / Website

This is a:
❏ Home Address

❏ Business Address

❏ Jobsite Address

Business Type:
(check 1 or 2 that best apply)

Company classification:
❏ Distributor/Wholesaler
❏ Engineering Firm
❏ Contractor
❏ Government
❏ OEM - Products manufactured:
❏ Other
SIC or industry sector:
My primary markets are (check all that apply):
❏ Commercial
❏ Residential
❏ Industrial
❏ Other

❏ Utility
❏ OEM
❏ Institutional

CUSTOMER SERVICE CENTRES
Vancouver

Winnipeg

Saint John

Tel (604) 534-8631
Fax (604) 534-7616

Tel (204) 633-3111
Fax (204) 633-3075

Calgary

Toronto

Tel (506) 633-7473
(PIPE)
Fax (506) 633-8720

Tel (403) 236-8333
Fax (403) 279-8443

Tel (905) 670-7676
Fax (905) 670-5295

Edmonton

Montreal

Tel (780) 415-5300
Fax (780) 415-5358

Tel (514) 337-2624
Fax (514) 337-7886

St. John’s
Tel (709) 747-7473
(PIPE)
Fax (709) 368-9111

Toll Free 1-866-473-9462 (IPEXINC)

About the IPEX Group of Companies
As leading suppliers of thermoplastic piping systems, the IPEX Group of
Companies provides our customers with some of the world’s largest and
most comprehensive product lines. All IPEX products are backed by more
than 50 years of experience. With state-of-the-art manufacturing facilities
and distribution centers across North America, we have established a
reputation for product innovation, quality, end-user focus and performance.
Markets served by IPEX group products are:
• Electrical systems
• Telecommunications and utility piping systems
• PVC, PVCO, CPVC, PP, ABS, PEX, FR-PVDF & PE pipe & ftgs (1/4" to 48")
• Industrial process piping systems
• Municipal pressure and gravity piping systems
• Plumbing and mechanical piping systems
• PE Electrofusion systems for gas and water
• Industrial, plumbing and electrical cements
• Irrigation systems

Products are manufactured by IPEX Electrical Inc.
Cor-Line®, FiberTel®, Kwikon®, Kwikpath®, Monobloc®, SceptaConTM,
SceptalightTM and SuperDuct® are trademarks of IPEX Branding Inc.

w w w . i p e x e l e c t r i c a l . c o m
This literature is published in good faith and is believed to be reliable.
However, it does not represent and/or warrant in any manner the
information and suggestions contained in this brochure. Data presented is
the result of laboratory tests and field experience.
A policy of ongoing product improvement is maintained. This may
result in modifications of features and/or specifications without notice.

CTELNAIP090805 © 2010 IPEX EL004C



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 49
Create Date                     : 2014:09:03 17:39:45
Creator                         : Google
Producer                        : Google
EXIF Metadata provided by EXIF.tools

Navigation menu