Data Sheet S85005 0126 E FSC
2014-09-27
: Pdf 91074-Attachment 1 91074-Attachment_1 782640 Batch8 unilog
Open the PDF directly: View PDF .
Page Count: 8
Download | |
Open PDF In Browser | View PDF |
Edwards Signaling Catalog u Fire Alarm Control Panels E-FSC Conventional Fire Alarm Control Panels Overview Standard Features The E-FSC fire alarm family consists of 3, 5 and 10 zone conventional fire alarm control panels, an integrated DACT/Dialer, serial annunciator modules, and serial remote relay modules. All of these components are microprocessor-controlled. The E-FSC family is ideal for both new and retrofit installations alike. • Available in 3, 5, and 10 IDC models E-FSC incorporates features designed to simplify installation, operation and maintenance. These include front panel programming, one person walk testing, and selectable IDC and NAC types. In addition, when used with Edwards CleanMe® -compatible smoke detectors, E-FSC provides analog type features such as remote maintenance alert and automatic drift compensation that reduces false alarms and simplifies maintenance calls. E-FSC502 and E-FSC1004 panels support Class A operation by combining pairs of on-board initiating curcuits (IDCs) or notification circuits (NACs) to provide the necessary Class A circuits. For example, the E-FSC1004 comes factory set to support 10 Class B IDCs and four NACs. But it can be field-configured to provide five Class A IDCs, no Class B IDCs, and two Class A NACs – or any other combination of circuits that fall within the circuit-pairing parameters. Class B IDCs Class A IDCs Class B NACs Class A NACs NAC Power Auxiliary power E-FSC1004 Up to 10 Up to 5 Up to 4 Up to 2 3.5 amps* 0.5 amps E-FSC502 Up to 5 Up to 2 Up to 2 1 3.5 amps 0.5 amps E-FSC302 3 Not supported 2 Not supported 3.5 amps 0.5amps • IDC or NAC pairs convertible to single Class A circuits (10 and 5 IDC panels only) • CleanMe® provides remote annunciation if a detector drifts out of UL/ULC limits reducing the chance of a false alarm • Combination Waterflow and Supervisory IDCs reduces wire and zone counts • NACs programmable by zone and individually selectable for Genesis, continuous, temporal outputs, or coded • Front panel programmable simplifies installation and servicing • Optional fully integrated DACT/Dialer for remote PC programming • Genesis option allows precision synchronization and audible silence over two wires without additional modules • On-board relays for Alarm, Supervisory and Trouble • Optional serial bus relay modules are programmable for common or zone activation • Optional serial bus remote annunciator family • One person walk-test (audible or silent) • Expandable power supply on 10 IDC panel reduces booster power costs • Trim ring available for semi-flush mounting • Supports 2M, “SC", 2400, 500, and 700 series detectors Note: Class A operation will reduce the number of available Class B IDCs and/or NACs, depending on the panel configuration. See Specifications on page 5 for details. *Expandable to 7.0 amps Page 1 of 8 S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 Application Panel LED Display E-FSC provides smoke and fire detection, occupant notification and off-premises signaling for small- to medium-sized buildings. The following system LEDs display the panel’s status: Each IDC can be configured for either Class B or Class A operation and one of eight operating modes: • Alarm –with or without smoke detector verification including discrimination of contact devices • Waterflow Alarm; • Waterflow Alarm/Supervisory (Combination IDC); • Alarm – panel is in the alarm state; • Trouble – panel is in the trouble state; • Supervisory – panel is in the supervisory state; • Power – indicates the status of the AC power source; • Disable – indicates when any IDC, NAC, relay or the DACT is disabled; • Supervisory (Latching/non-latching); • Annunciator Trouble – indicates trouble on the remote annunciator bus; • Monitor (non alarm or supervisory) • Battery Trouble – indicates battery or charging problems; • Signal Silence • Ground Fault – indicates a short between any panel circuit and ground; • Drill • Cross zoning NACs may also be configured for either Class B or Class A operation (5 and 10 zone panels). Additionally, NACs can be individually configured for one of six outputs. These are Genesis, Genesis (A/V silenceable), Continuous, Temporal, Coded, and City Tie. The Genesis selection allows independent horn control over two wires and provides precision synchronization for Genesis devices, all without the need for a Genesis Signal Master accessory. When configured for Genesis notification appliances, E-FSC’s Alarm Silence function will silence connected Genesis audible appliances but Genesis strobes will remain active until the panel is reset. When Genesis Mode is selected, both the horns and strobes on Genesis and Enhanced Integrity notification appliances will be synchronized across all NACs. Note: zones may be selected for either latching or non-latching operation. Detectors with intelligent features at a conventional price When combined with Edwards CleanMe® -compatible smoke detectors, E-FSC provides intelligent features at a conventional price. If a CleanMe® detector drifts out of the UL/ULC sensi- Replaceable tivity range, Edwards Signaling's optical chamber! patented remote maintenance reporting sends an alert to the E-FSC control panel. This feature reduces the chance of a false alarm and simplifies service calls. In addition, CleanMe® -compatible smoke detectors have built-in drift compensation that extends the time between cleanings. If cleaning is ever necessary, it is literally a snap with Edwards Signaling's exclusive replaceable optical chamber. Page 2 of 8 • Walk Test – indicates that one or more IDCs are in the walk test mode; • Alarms Silenced – indicates that the panel is in the alarm state with one or more NACs silenced. • Waterflow – indicates that one or more circuits have detected an active waterflow switch. • Service Detector – indicates the presence of a dirty detector. • Remote Disconnect – indicates off site communication has been disabled. Each IDC has a disable switch and three LEDs: • Alarm – red – indicates that the IDC is in the alarm state; • Trouble – yellow – indicates that the IDC is in the trouble state or is disabled (when flashing); • Supervisory/Monitor – yellow – indicates that the IDC is in the supervisory state or the monitor state (when flashing). Each NAC also has a disable switch and a trouble/disable LED. Status indication with the DACT/Dialer installed The dialer’s LCD display provides two lines x 16 characters of text. For programming, the top line displays the programming step and the lower line displays the selected option. All system events are displayed on the LCD with custom zone messages. During normal operation, the LCD will display any off-normal condition present in the panel. S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 Power Connections Options L N Cabinet From 120 Vac, 15 A, 60 Hz Dedicated branch circuit –OR– From 230 Vac, 15 A, 50/60 Hz Dedicated branch circuit Main AC wiring block and fuse holder Fuse Dual transformer AC wiring block N2 Tie wrap mounts The DACT brings additional features to the panel including a 32-character alphanumeric LCD display, remote PC programming and an event history log. L2 N L Main transformer Main controller board TB1 XTR (optional transformer) Off-premise communication A fully integrated E-FSC DACT/dialer is available for reporting events to a monitoring facility. The DACT also supports uploading or downloading of system configuration, status and event history. The DACT is programmable for either single or dual line operation. It also supports split and dual reporting for two digital alarm receivers. Mounting studs Remote Annunciators and Relays The serial bus standard on all E-FSC models is another installation time-saver. This circuit allows the connection of Remote System Indicators (FSRSI), Remote Zone Indicators (FSRZI-A, FSRZI-SA) and Remote Relay Modules (FSRRM24) over a four-wire (data and power) circuit. Annunciator and relay modules can be installed up to 1,000 feet from the panel on 18-gauge wire. Modules are also available for City Tie (CTM) and Reverse Polarity (RPM) connections. J4 Plug connector DACT/Dialer Remote Relay Module The DACT/Dialer installs behind the front panel display. RJ31 jacks To wall phone jack Line 1 Line 2 Phone cables (supplied) RJ31 jacks J2 Note: All panel versions are available with factory installed DACT. See order table for ordering information. Page 3 of 8 The optional DACT/Dialer is a multifunction module that provides communications, modem capability, and LCD display functions. Its primary function is as a Digital Alarm Communicator Transmitter (DACT). As a DACT, it transmits event messages to a Digital Alarm Communicator Receiver (DACR) at a monitoring facility. The monitoring facility then notifies the fire department and other responsible parties of the event. Programmable options include single or dual line operation, and split or dual reporting to two DACRs. The DACT module can also be used as a modem to connect the panel to remote computers for uploading and downloading of configuration data (programming), panel status and event history. For security, the modem can be configured to accept programming on incoming calls or it can be required to call a preprogrammed number before accepting downloads and sending uploads. The DACT module can be configured to work as all of the above, or as only an LCD display or LCD display and modem. The Remote Relay Module mounts on a plastic track inside an MFC-A cabinet. Up to 4 RRM24s can be mounted in an FSRRM-S11 snap track. Up to two FSRRM-S11s can be mounted in an MFC-A. When configured in the zone relay mode, relays energize when the associated IDC is active. The module can be configured for activation by IDCs 1 through 5 or IDCs 6 through 10. One relay is automatically associated with each IDC. When configured in the common system mode, relays energize or deenergize when the panel To next device changes state. One relay Communication out Communication out + is available for each of the following functions: Alarm, Supervisory, Trouble, Power Loss, Monitor. RRM Snap track { The Remote Relay Module (FSRRM24) is one component of the system that sets E-FSC apart from other panels in its class. This module has five Form C relays rated at 1 amp each. It can be configured to function in either a zone relay mode or a common system mode. From control panel or previous device { Communication in + Communication in - Power in Power in + OUT 1 24V IN C IN C OUT OUT 3 + - - + - + NO C NC NO C NC 24V OUT + - X OUT 2 OUT 5 OUT 4 NO C NC NO C NC NO C NC Power out Power out + { To next device The FSRRM24 mounts on a plastic snap track and can be installed in an MFC-A or other listed fire alarm enclosure. The panel will support two RRMs of each configuration for a total of six on the 10-zone panel. S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 Remote Annunciators Compatible electrical box The E-FSC family has several remote annunciation options. The serial remote annunciator bus can be run up to 1000 feet (305 m) on untwisted non-shielded 18-gauge cable. Serial annunciator models round out the family to provide a range of features and functions. As many as three annunciator modules may be mounted in a standard electrical box, sharing an attractive trim plate that blends with any decor. I RZ FS r o I S R FS The FSRSI can be installed alone or with one or more FSRZIs. The FSRSI and FSRZI-A require trim plates (ordered separately). These are available in one, two or three gang models. Each panel will support two FSRSIs. Remote System Indicator (FSRSI) The FSRSI is ideal for common system annunciation. It includes five LEDs and a local silence/lamp test switch. The LEDs indicate power status, alarm, superFrom control panel visory, trouble and ground or previous device Communication in fault. The silence switch will Communication in + silence the onboard trouble Power in + buzzer if active. The switch Power in can also be used to initiate a lamp test of the LEDs on 24V IN C IN - + + all connected FSRSIs and C OUT - + + FSRZIs. -24V +24V C+ TB2 LINE IN -24V +24V C+ C- TB1 C- J5 #1 IN #2 OUT J4 GROUP J2 #1 IN #2 OUT IN ZONE 1-5 J3 ZONE 6-10 LINE OUT J2 OUT ZONE 11-15 { { TB2 TB1 Communication in Communication in + Power in + Power in - From control panel or previous device Remote Zone Indicator (FSRZI-A) The FSRZI-A is used to indicate zones in the alarm state. It contains five red LEDs. Depending on the jumper setting selected, the LEDs will indicate either IDCs 1 through 5 or IDCs 6 through 10. The panel can support two modules programmed for each selection. Remote Zone Indicator (FSRZI-SA) The FSRZI-SA is used to indicate zones in the alarm or supervisory state. It contains five bi-color LEDs. Depending on the jumper setting selected, the LEDs will indicate either Communication in IDCs 1 through 5 or IDCs Communication in + Power in + 6 through 10. The panel Power in supports two modules From control panel or previous device programmed for each se24V IN C IN lection, and can be jumper - + + C OUT - + + selected to provide Alarm or Supervisory indications Power out Communication out Communication out + J3 ZONE 6-10 J2 OUT ZONE 11-15 TB2 TB1 { 24V IN C IN - + + 24V OUT C OUT - + + - { IN ZONE 1-5 24V OUT 24V OUT Power out + C- -24V +24V C+ J5 #1 IN #2 OUT J4 Power out + Power out Communication out Communication out + { Power out + Power out Communication out Communication out + To next device { To next device To next device FSUIM Graphic Driver/Interface FSRA10, FSRA10C Remote LED annunciators The FSRA10 is a remote annunciator with capacity for up to ten zones. It includes ten bi-color LEDs (red/yellow) for indicating active zones, and ten yellow LEDs for indicating zone troubles. The (C) option adds common control switches. Both versions mount to standard North American 4-inch square electrical boxes. A surface box is also available. The FSUIM is a universal interface module that can be used by E-FSC to drive graphic annunciators. It also allows E-FSC control panels to control, or be controlled by, other control panels. The FSUIM provides five supervised switch inputs and nine dry contact relay outputs. Nine LEDs provide visual confirmation when each relay is energized. The FSUIM is shipped with a plastic snap track for mounting in an MFC-A cabinet or other listed fire alarm enclosure. From control panel + or 24VDC power supply + + + + + + + + + Note: [5] AlarmTrblSupMonitorPowerResetSig SilPanel SilGnd Flt FSRA10, FSRA10C Wiring From control panel or 24VDC supply From control panel 24V 24V 24V 24V N.U. C C N.U. [7][7] To next remote module C C N.U. ON: Group 1 OFF: Group 2 +– From control panel + or 24VDC power supply From control panel C+C–Reset Signal Silence Panel Silence TBLNot used Lamp Test 4.7 k EOLR + C+ C C+ C To next remote module 4.7 k EOLR Dry contact outputs to secondary control panel (Used when controlling other control panels) Page 4 of 8 S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 AlarmTrblSupMonitorPowerResetSig SilPanel SilGnd Flt Remote Annunciator Specifications General Agency Listings Remote Annunciators Maximum per System Current Requirements Voltage Range Maximum Circuit Capacitance Maximum Circuit Resistance Wire Size Mounting Operating Environment Remote Relay Module – FSRRM24 Maximum per system Current Requirements Voltage Range Contact Rating Maximum Circuit Capacitance Maximum Circuit Resistance Wire Size Mounting Operating Environment Dimensions F-Series Remote Annunciators Common Controls Dimensions Mounting Power Wiring Data Wiring UL864 (53000), ULC-S527, CSFM FSRSI Remote System Indicator FSRZI-A/FSRZI-SA Remote Zone Indicator All panels: 2 10 zone panel: 4 3 or 5 zone panel: 2 Standby: 17 mA Alarm: 56 mA Standby: 8 mA Alarm 76 mA Minimum: 18.8 Vdc; Maximum: 27.3 Vdc 0.03 µF 13 Ohms 18 - 12 AWG (0.75 mm² - 2.5 mm²) ANSI/NEMA OS1-1996 1-3 gang electrical box Temperature: 32 - 120° F (0 - 49° C); Humidity: 93% RH, non-condensing Configured for Zone Mode Configured for Common Mode 10 zone panel: 4; 3 or 5 zone panel: 2 All panels: 2 Standby: 10 mA; Alarm: 70 mA Standby: 26 mA; Alarm: 70 mA Minimum: 18.8 Vdc; Maximum: 27.3 Vdc 1 A @ 30 Vdc 0.03 µF 13 Ohms 18 - 12 AWG (0.75 mm² - 2.5 mm²) Single FSRRM24 mounts in plastic track (included) or up to four FSRRM24s in an FSRRM-S11 11” track ordered separately. FSRRM24s should be installed in an MFC-A or other listed fire alarm enclosure. Temperature: 32 - 120° F (0 - 49° C); Humidity: 93% RH, non-condensing 2-3/4” W x 3-3/8” H x 1-1/2” D (65.9 mm W x 85.7 mm H x 38.1 mm D) Standby current Alarm current Operating environment FSRA10 FSRA10C No Yes 5-5/8" x 8½" x 1 ½" in (14.3 cm x 21.4 cm x 3.8 cm) North American 4-inch square electrical box or listed enclosure 18 to 12 AWG (0.75 to 2.50 sq mm) 18 to 12 AWG (0.75 to 2.50 sq mm) twisted pair (6 twists per foot minimum) 18.8 to 27.3 Vdc Supply must be UL/ULC listed for fire protective signaling systems. Do not use FACP accessory power outputs that are interrupted when the panel is reset. 17 mA 98 mA Temperature: 32 to 120 °F (0 to 49 °C); Humidity: 0 to 93% RH, noncondensing at 90 °F (32 °C) FSUIM Universal Input Module Mounting Wire size Operating voltage Circuit capacitance Circuit resistance Switch inputs Relay outputs Contact rating Standby Curent Alarm Current Operating environment MFC-A cabinet or listed fire alarm enclosure 12 to 18 AWG (0.75 to 2.5 sq mm) 21.2 to 27.3 Vdc 0.03 μF, max. 13 ohms, max. Quantity: 5 End-of-line resistor: 4.7 k ohms ½ W Quantity: 9 Type: Common Style: Form C 30 Vdc at 1 A (resistive load) 53 mA 114 mA Temperature: 0 to 49 °C (32 to 120 °F); Humidity: 0 to 93% RH, noncondensing at 32 °C (90 °F) Operating voltage Page 5 of 8 S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 Control Panel Specifications Control Panels Initiating Device Circuits – IDCs (Available combinations shown at right) Notification Appliance Circuits – NACs (Available combinations shown at right) Power Supply NAC Voltage Rating Class B Class A Class B Class A Maximum NAC current AC Input, 120 Vac 60 Hz Base Panel Current Draw E-FSC1004 10 8 6 4 2 0 0 1 2 3 4 5 4 2 2 0 0 1 1 2 4.25 amps expandable to 7.5 amps E-FSC302 Three Class B IDCs 2.0 amps each, 3.5 amps total 7.0 amps w/ optional transformer 2.2 amps w/ optional transformer E-FSC502 3 1 1 2 0 1 4.25 amps total 24 Vfwr 2.0 amps each 3.5 amps total 1.25 amps 128 mA 242 mA 104 mA 224 mA 96 mA 180 mA Standby... Alarm... Panel Battery Charge Capacity (sealed lead acid only) Auxiliary Current Auxiliary Output IDC Alarm Current IDC Circuit IDC Operating Voltage UL Detector ID Alarm Contact (normally open Form C) Trouble Contact (Form C) Supervisory Contact (normally open Form C) Operating Environment Terminals (wire gauge) Asynchronous Serial Communications Agency Listings 5 0 2 0 Two Class B NACs 4.25 amps total 2.0 amps each 3.5 amps total 1.2 amps Up to two 24 Ah batteries, Up to 24 Ah, 18 Ah in cabinet 10 Ah max in cabinet * 0.5 amps max. May be programmed as resettable. 24 Vdc regulated 3.0 mA (Consult detector compatibility list p/n 3100468 for maximum detectors per circuit) Maximum loop resistance: 13 Ohms; Maximum loop capacitance: 0.03 µF 16.9 to 29 Vdc 100 30 Vdc @ 1 A (resistive load) 30 Vdc @ 1 A (resistive load) 30 Vdc @ 1 A (resistive load) Temperature: 32 - 120° F (0 - 49° C); Humidity: 5 - 93% RH, non-condensing 18 - 12 AWG (0.75 mm² - 2.5 mm²) Maximum resistance: 13 Ohms; Maximum capacitance: 0.03 µF UL864 (53000), ULC-S527, CSFM * If larger batteries are required, use an external battery cabinet. DACT – F-DACT (mounts in panel) Receivers Communications Protocol Programming Telephone line connection Telephone lines Telephone wall connector Communications Compliance Operating Environment Current requirements Agency Listings Supports two receivers with two phone numbers each Contact ID (SIA DC-05), 4/2 (SIA DC-02 P3) Front panel controls or PC with appropriate software Two RJ31X (plug-to-plug) cords supplied with DACT Two or one loop start lines on the public switched telephone network. Pulse or DTMF. RJ31X/CA31X equiv. or RJ38X/CA38X equiv. Industry Canada CS-03; FCC/CFR 47 Parts 15 & 68; NFPA 72; UL 864; ULC S527 Temperature: 32-120° F (0-49° C); Humidity: 93% RH, non-condensing Standby: 65 mA; Alarm: 107 mA UL864 (53000), ULC-S527, CSFM Dimensions D1* D2 D3 Three- & five- zone 19.5 in (49.5 cm) 3.75 in (9.5 cm) 9.13 in (23.2 cm) Ten-zone 30 in (76.2 cm) 3.75 in (9.5 cm) 7.75 in (19.7 cm) D4 10.5 in (26.67 cm) 21.27 in (54.0 cm) D5* 14.23 in (36.14 cm) 15.0 in (38.1 cm) D2 *Add 1½ inches (3.81 cm) to D1 and D5 dimensions for trim kit. D1 Semi-flush mounting holes Model D3 Surface mounting holes D4 D5 Page 6 of 8 S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 Ordering Information Part Number Ship Wt. lb. (kg.) Description Control Panels E-FSC1004* E-FSC502* E-FSC302* F-TRIM35* F-TRIM10* Conventional Fire Alarm Control Panel – 10 Class B IDCs and 4 Class B NACs (Pairs of IDCs and NACs convertible to single Class A circuits), 120 Vac Conventional Fire Alarm Control Panel – 5 Class B IDCs and 2 Class B NACs (Pairs of IDCs and NACs convertible to single Class A circuits), 120 Vac Conventional Fire Alarm Control Panel – 3 Class B IDCs and 2 Class B NACs, 120 Vac Semi-flush trim ring for E-FSC302 and E-FSC502 Semi-flush trim ring for E-FSC1004 30.5 (13.8) 18.5 (8.4) 18.0 (8.2) 1.7 (0.8) 2.2 (1.0) * Insert “G” for Gray cabinet or “R” for Red cabinet. Insert “GD” or “RD” for red and gray cabinets with dialer installed. Related Items F-XTR120 EOL3.6-1.1 EOL-P1 Expander Transformer, 120 Vac - For E-FSC1004* only Required UL listed End of Line Resistors – One 3.6K Ohm and one 1.1K Ohm. One required for each IDC configured as combination waterflow and supervisory. Required ULC listed End of Line Resistor Plate - includes one 1.1K, 3.6K and 4.7K Ohm resistor 4.0 (1.8) 0.1 (0.5) 1.0 (0.5) Off Premises Communications F-DACT Digital Communicator/Modem/LCD module (Mounts in control panel) CTM City Tie Module (Requires 4” square or 2-gang North American electrical box) RPM Reverse Polarity Module (Requires MFC-A or other listed fire alarm enclosure) 1.0 (0.5) 1.0 (0.5) 3.0 (1.4) Remote Annunciation Remote System Indicator – Includes LEDs for display of Power, Alarm, Supervisory, Trouble and Ground Fault, FSRSI trouble sounder and silence/lamp test switch. Single gang trim plate included, multi-gang plates ordered separately. Mounts in a single or multi-gang North American electrical box. Remote Zone Indicator – Includes red LEDs for five IDCs. Single gang trim plate included, multi-gang plates FSRZI-A ordered separately. Mounts in single or multi-gang North American electrical box. Remote Zone Indicator – Includes LEDs for five IDCs. Single gang trim plate included, multi-gang plates ordered FSRZI-SA separately. Mounts in single or multi-gang North American electrical box. Jumper selected Alarm (red) or Supervisory (amber) indications. FSAT1 Annunciator Trim Plate, 1 gang FSAT2 Annunciator Trim Plate, 2 gang FSAT3 Annunciator Trim Plate, 3 gang FSAT4 Annunciator Trim Plate, 4 gang FSRA10 Single Unit 10 zone remote annunciator for E-FSC1004 FSRA10C Single Unit 10 zone remote annunciator for E-FSC1004 (with common controls) FSUIM Common Function Graphic Driver/Interface - 9 relays and 5 switch inputs for common system indicators and controls Remote Relay Module Remote Relay Module – Five Form C relays. Configurable for IDCs 1-5, or 6-10, or common system indications. FSRRM24 Requires MFC-A or other listed fire alarm enclosure. FSRRM-S11 11” Mounting track. Holds up to 4 FSRRM24s. Accessories MFC-A Page 7 of 8 Multi-function Cabinet (fire alarm accessory enclosure) 0.3 (0.1) 0.3 (0.1) 0.3 (0.1) 0.1 (0.05) 0.1 (0.05) 0.1 (0.05) 0.1 (0.05) 0.4 (0.2) 0.4 (0.2) 7.0 (3.2) S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 Contact us... Phone: 1-800-336-4206 Web: www.edwardssignaling.com Edwards Signaling is an EDWARDS brand. 3 Farm Glen Boulevard Farmington, CT 06032 In Canada, contact Chubb Edwards... Email: inquiries@chubbedwards.com Web: www.chubbedwards.com © 2013 UTC Fire & Security Americas Corporation, Inc. All rights reserved. Specifications subject to change without notice. Edwards is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. S85005-0126 D ATA S H E E T Not to be used for installation purposes. Issue 2 06-27-13 Page 8 of 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:8837e37c-cbcf-4aec-9ebb-b4aec6209837 Original Document ID : adobe:docid:indd:a21c1ebb-87b2-11da-943f-d2d35972e843 Document ID : xmp.did:E94010D081E6DF11ABB6D261AF430DF7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:E84010D081E6DF11ABB6D261AF430DF7 Derived From Document ID : adobe:docid:indd:a21c1ebb-87b2-11da-943f-d2d35972e843 Derived From Original Document ID: adobe:docid:indd:a21c1ebb-87b2-11da-943f-d2d35972e843 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:A7C5CF5DC661DE119483B6DF01674D4C, xmp.iid:A8C5CF5DC661DE119483B6DF01674D4C, xmp.iid:A9C5CF5DC661DE119483B6DF01674D4C, xmp.iid:FC0604137B63DF11AC3482FA71E058B7, xmp.iid:C34B93048A6ADF11A009C6141FFAA861, xmp.iid:3F3CE76CE26FDF11AEB4F5F3A4D6388E, xmp.iid:0942E3E7718BDF11A9BAF56ACBBA19FA, xmp.iid:E84010D081E6DF11ABB6D261AF430DF7, xmp.iid:E94010D081E6DF11ABB6D261AF430DF7, xmp.iid:EA4010D081E6DF11ABB6D261AF430DF7, xmp.iid:70CE941C84E6DF11ABB6D261AF430DF7, xmp.iid:78CE941C84E6DF11ABB6D261AF430DF7, xmp.iid:A1B6F344C6E6DF118207995F0EA1CCA6, xmp.iid:A0528793FF65E0119B90C225EE43ECCF, xmp.iid:948A6DCE8BA2E01183C4C3AF53E143A6, xmp.iid:5E42C99B9B21E111BECA8B3EC1A30364, xmp.iid:CD71245ED524E1118342E1712D64313D, xmp.iid:82C54BDFF260E211BAC090A3F31E488C, xmp.iid:B46E6AB664DFE2118E8B83750C30A222 History When : 2009:06:25 16:28:11-04:00, 2009:06:25 16:28:12-04:00, 2009:06:25 16:33:19-04:00, 2010:05:19 15:44:13-04:00, 2010:05:28 14:52:25-04:00, 2010:06:04 10:14:19-04:00, 2010:07:09 11:52:03-04:00, 2010:11:02 09:12:45-04:00, 2010:11:02 09:12:45-04:00, 2010:11:02 09:18:38-04:00, 2010:11:02 09:21:33-04:00, 2010:11:02 09:47:33-04:00, 2010:11:02 17:17:28-04:00, 2011:04:13 14:55:18-04:00, 2011:06:29 16:10:16-04:00, 2011:12:08 08:29:14-05:00, 2011:12:12 10:47:09-05:00, 2013:01:17 17:11:49-05:00, 2013:06:27 16:05:55-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, / Manifest Link Form : ReferenceStream, DirectStream, DirectStream Manifest Placed X Resolution : 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:58EB00B0502AE011BE17973D65A1C5BF, uuid:6979c834-88cc-4088-a0b2-fd93cb149e39, xmp.iid:D2A88ABF198CE2119550F3784E20E5E1 Manifest Reference Document ID : xmp.did:F10C100A1B5CDE119E8AE89C0917725E, uuid:B2891F721960DA11B30C99F00809829C, xmp.did:D2A88ABF198CE2119550F3784E20E5E1 Create Date : 2013:06:27 16:10:53-04:00 Modify Date : 2013:07:22 10:53:31-04:00 Metadata Date : 2013:07:22 10:53:31-04:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11533 bytes, use -b option to extract) Format : application/pdf Rights : Copyright 2013 UTC Fire & Security Americas Corporation, Inc. All rights reserved. Specifications subject to change without notice. Edwards Signaling is an Edwards brand. Edwards is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. Description : Data Sheet: Edwards Signaling Brand Life Safety & Communications Products; S85005-0126 -- E-FSC Title : Data Sheet S85005-0126 -- E-FSC Creator : JE Subject : Edwards, Life Safety, Fire Alarm, Wholesale, Distribution, Emergency Communications, Detection & Alarm Marked : True Web Statement : www.edwardssignaling.com Doc Change Count : 250 Producer : Adobe PDF Library 9.0 Trapped : False Page Layout : TwoPageRight Page Count : 8 Author : JEEXIF Metadata provided by EXIF.tools