FortiGate I Student Guide Forti Gate Online V2

• Virtual Lab Basics
  • Network Topology
  • Troubleshooting Tips
• LAB 1–Introduction to FortiGate
  • 1 Working With the Command Line Interface
  • 2 Configuration Backups
  • 3 Administrative Accounts
• LAB 2–Logging and Monitoring
  • 1 Configuring Logging on FortiGate
  • 2 Monitoring Logs Through Alert Email
  • 3 Viewing Logs in the FortiGate GUI
• LAB 3–Firewall Policies
  • 1 Creating Firewall Address Objects and Firewall Policies
  • 2 Reordering Firewall Policies and Firewall Policy Actions
  • 3 Device Identification
  • 4 Policy Lookup
• LAB 4–Network Address Translation (NAT)
  • 1 Access Through VIPs
  • 2 Dynamic NAT with IP pools
  • 3 Enabling Central NAT
  • 4 Configuring Central SNAT
  • 5 DNAT and VIPs
• LAB 5–Firewall Authentication
  • 1 Remote Authentication
  • 2 Captive Portal
• LAB 6–SSL VPN
  • 1 Web-Only SSL VPN
  • 2 SSL VPN Tunnel Mode
• LAB 7–Basic IPsec VPN
  • 1 Route-based IPsec VPN
  • 2 Policy-based IPsec VPN
  • 3 Testing and Monitoring the VPN
• LAB 8–Explicit Web Proxy
  • 1 Configuring the Explicit Web Proxy
  • 2 Using a PAC File
• LAB 9–Antivirus
  • 1 Proxy-based Antivirus Scanning
  • 2 Flow-based Antivirus Scanning
• LAB 10–Web Filtering
  • 1 FortiGuard Web Filtering
  • 2 Web Filtering Authentication
  • 3 Web Profile Overrides
• LAB 11–Application Control
  • 1 Creating an Application Control Profile
  • 2 Limiting Traffic Using Traffic Shapers
  • 3 Configuring CASI
• Appendix A: Additional Resources
• Appendix B: Presentation Slides
  • 1 Introduction to FortiGate
  • 2 Logging and Monitoring
  • 3 Firewall Policies
  • 4 Network Address Translation (NAT)
  • 5 Firewall Authentication
  • 6 SSL VPN
  • 7 Basic IPsec VPN
  • 8 Explicit Proxy
  • 9 Antivirus and Conserve Mode
  • 10 Web Filtering
  • 11 Application Control