FortiGate I Student Guide Forti Gate Online V2
User Manual: Pdf
Open the PDF directly: View PDF 
.
Page Count: 556
| Download | |
| Open PDF In Browser | View PDF |
DO NOT REPRINT © FORTINET FortiGate I Student Guide for FortiGate 5.4.1 DO NOT REPRINT © FORTINET FortiGate I Student Guide for FortiGate 5.4.1 Last Updated: 4 August 2016 ® ® ® Fortinet , FortiGate , and FortiGuard are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be trademarks, registered or otherwise, of Fortinet. All other product or company names may be trademarks of their respective owners. Copyright © 2002 - 2016 Fortinet, Inc. All rights reserved. Contents and terms are subject to change by Fortinet without prior notice. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Fortinet, Inc., as stipulated by the United States Copyright Act of 1976.s DO NOT REPRINT © FORTINET Table of Contents VIRTUAL LAB BASICS ...................................................................................5 LAB 1–INTRODUCTION TO FORTIGATE .........................................................15 1 Working With the Command Line Interface ........................................................................16 2 Configuration Backups ........................................................................................................18 3 Administrative Accounts......................................................................................................22 LAB 2–LOGGING AND MONITORING..............................................................25 1 Configuring Logging on FortiGate.......................................................................................27 2 Monitoring Logs Through Alert Email .................................................................................30 3 Viewing Logs in the FortiGate GUI .....................................................................................33 LAB 3–FIREWALL POLICIES .........................................................................35 1 Creating Firewall Address Objects and Firewall Policies ...................................................37 2 Reordering Firewall Policies and Firewall Policy Actions ...................................................40 3 Device Identification ............................................................................................................43 4 Policy Lookup ......................................................................................................................48 LAB 4–NETWORK ADDRESS TRANSLATION (NAT) .......................................51 1 Access Through VIPs .........................................................................................................53 2 Dynamic NAT with IP pools ................................................................................................57 3 Enabling Central NAT .........................................................................................................60 4 Configuring Central SNAT ..................................................................................................64 5 DNAT and VIPs ...................................................................................................................70 DO NOT REPRINT © FORTINET LAB 5–FIREWALL AUTHENTICATION.............................................................73 1 Remote Authentication........................................................................................................75 2 Captive Portal......................................................................................................................81 LAB 6–SSL VPN ........................................................................................85 1 Web-Only SSL VPN ............................................................................................................86 2 SSL VPN Tunnel Mode .......................................................................................................92 LAB 7–BASIC IPSEC VPN ...........................................................................95 1 Route-based IPsec VPN .....................................................................................................97 2 Policy-based IPsec VPN .....................................................................................................101 3 Testing and Monitoring the VPN .........................................................................................105 LAB 8–EXPLICIT WEB PROXY ......................................................................106 1 Configuring the Explicit Web Proxy ....................................................................................107 2 Using a PAC File .................................................................................................................113 LAB 9–ANTIVIRUS .......................................................................................118 1 Proxy-based Antivirus Scanning .........................................................................................120 2 Flow-based Antivirus Scanning ..........................................................................................124 LAB 10–WEB FILTERING .............................................................................128 1 FortiGuard Web Filtering.....................................................................................................130 2 Web Filtering Authentication ...............................................................................................137 3 Web Profile Overrides .........................................................................................................140 LAB 11–APPLICATION CONTROL .................................................................142 1 Creating an Application Control Profile ...............................................................................144 DO NOT REPRINT © FORTINET 2 Limiting Traffic Using Traffic Shapers .................................................................................147 3 Configuring CASI ................................................................................................................150 APPENDIX A: ADDITIONAL RESOURCES........................................................152 APPENDIX B: PRESENTATION SLIDES............................................................153 1 Introduction to FortiGate .....................................................................................................154 2 Logging and Monitoring ......................................................................................................189 3 Firewall Policies ..................................................................................................................236 4 Network Address Translation (NAT) ...................................................................................271 5 Firewall Authentication ........................................................................................................302 6 SSL VPN .............................................................................................................................349 7 Basic IPsec VPN .................................................................................................................390 8 Explicit Proxy.......................................................................................................................419 9 Antivirus and Conserve Mode.............................................................................................450 10 Web Filtering ......................................................................................................................493 11 Application Control .............................................................................................................535 DO NOT REPRINT © FORTINET Virtual Lab Basics Virtual Lab Basics In this class, you will use a virtual lab for hands-on exercises. This section explains how to connect to the lab and its virtual machines. It also shows the topology of the virtual machines in the lab. Note: If your trainer asks you to use a different lab, such as devices physically located in your classroom, please ignore this section. This applies only to the virtual lab accessed through the Internet. If you do not know which lab to use, please ask your trainer. FortiGate I Student Guide 5 DO NOT REPRINT © FORTINET Virtual Lab Basics Network Topology port2 10.200.1.241 FortiManager FortiAnalyzer port1 10.0.1.241 LOCAL-WINDOWS 10.0.1.10 port1 10.0.1.210 port3 10.200.1.210 10.0.1.254/24 port3 eth0 port2 10.200.2.1/24 LOCAL-FORTIGATE port1 10.200.1.1/24 10.200.2.254 eth2 LINUX 10.200.1.254 eth1 eth4 10.200.4.254 eth3 10.200.3.254 10.200.4.1/24 port5 REMOTE-FORTIGATE 10.200.3.1/24 port4 REMOTE-WINDOWS 10.0.2.10 port6 10.0.2.254/24 Logging In 1. Run the System Checker. This will fully verify both: compatibility with the virtual lab environment's software, and that your computer can connect. It can also diagnose problems with your Java Virtual Machine, firewall, or web proxy. FortiGate I Student Guide 6 DO NOT REPRINT © FORTINET Virtual Lab Basics Use the URL for your location. North America/South America: https://remotelabs.training.fortinet.com/training/syscheck/?location=NAM-West Europe/Middle East/Africa: https://remotelabs.training.fortinet.com/training/syscheck/?location=Europe Asia/Pacific: https://remotelabs.training.fortinet.com/training/syscheck/?location=APAC If a security confirmation dialog appears, click Run. If your computer successfully connects to the virtual lab, the result messages for the browser and network checks will each display a check mark icon. Continue to the next step. If a browser test fails, this will affect your ability to access the virtual lab environment. If a network test fails, this will affect the usability of the virtual lab environment. For solutions, either click the Support Knowledge Base link or ask your trainer. 2. With the user name and password from your trainer, log into the URL for the virtual lab. Either: https://remotelabs.training.fortinet.com/ FortiGate I Student Guide 7 DO NOT REPRINT © FORTINET Virtual Lab Basics https://virtual.mclabs.com/ 3. If prompted, select the time zone for your location, then click Update. This ensures that your class schedule is accurate. 4. Click Enter Lab. A list of virtual machines that exist in your virtual lab should appear. FortiGate I Student Guide 8 DO NOT REPRINT © FORTINET Virtual Lab Basics From this page, you can access the console or desktop of any of your virtual devices by either: clicking on the device’s square, or selecting System > Open. 5. Click Local-Windows VM to open a desktop connection to that virtual machine. A new window should open within a few seconds. (Depending on your account’s preferences, the window may be a Java applet. If that is the case, you may need change browser settings to allow Java to run on this web site.) Connections to Windows and Linux machines will use a remote desktop-like GUI. You should automatically log in. After that, the desktop is displayed. Connections to Fortinet's VM use the VM console port, which you can use to enter command line interface (CLI) commands. FortiGate I Student Guide 9 DO NOT REPRINT © FORTINET Virtual Lab Basics Disconnections/Timeouts If your computer’s connection with the virtual machine times out or if you are accidentally disconnected, to regain access, return to the initial window/tab that contains your session’s list of VMs and open the VM again. If that does not succeed, see Troubleshooting Tips. Using Java Instead of HTML5 When you open a VM, by default, your browser will use HTML5 to connect to your lab's VM. Alternatively, you may be able to use Java instead. Your browser will download and use a Java application to connect to the virtual lab’s VM. Not all browsers support the Java plug-in, so if you want to use Java, Mozilla Firefox is recommended. This means that Java must be installed, updated, and enabled in your browser. Once you have done that, in your virtual lab, click the Settings button, and then select Use Java Client. Click Save & Disconnect, then log in again. (To use this preference, your browser must allow cookies.) When connecting to a VM, your browser should then open a display in a new applet window. FortiGate I Student Guide 10 DO NOT REPRINT © FORTINET Virtual Lab Basics Screen Resolution Some Fortinet devices' user interfaces require a minimum screen size. In the HTML 5 client, to configure screen resolution, open the System menu. FortiGate I Student Guide 11 DO NOT REPRINT © FORTINET Virtual Lab Basics In the Java client, to configure the screen resolution, click the arrow at the top of the window. International Keyboards If characters in your language don’t display correctly, keyboard mappings may not be correct. To solve this in the HTML 5 client, open the Keyboard menu at the top of the window. Choose to display the on-screen keyboard. Troubleshooting Tips Do not connect to the virtual lab environment through Wi-Fi, 3G, VPN tunnels or other lowbandwidth or high-latency connections. For best performance, use a stable broadband connection such as a LAN. If disconnected unexpectedly from any of the virtual machines (or from the virtual lab portal), please attempt to reconnect. If unable to reconnect, please notify the instructor. If you can't connect to a VM, on the VM's icon, click System > Power Cycle. This fixes most problems by forcing VM startup and connection initiation. If that does not solve the problem, try System > Revert to Initial State. Note: Reverting to the VM's initial snapshot will undo all of your work. Try other solutions first. FortiGate I Student Guide 12 DO NOT REPRINT © FORTINET Virtual Lab Basics If the HTML 5 client does not work, try the Java client instead. Remembering this preference requires that your browser allows cookies. Do not disable or block Java applets if you want to use the Java client. Network firewalls can block Java executables. Not all browsers/systems allow Java. In late 2015, Google Chrome removed Java compatibility, so it cannot be used with the Java client. On Mac OS X since early 2014, to improve security, Java has been disabled by default. In your browser, you must allow Java for this web site. On Windows, if the Java applet is allowed and successfully downloads, but does not appear to launch, you can open the Java console while troubleshooting. To do this, open the Control Panel, click Java, and change the Java console setting to be Show console. Note: JavaScript is not the same as Java. FortiGate I Student Guide 13 DO NOT REPRINT © FORTINET Virtual Lab Basics Prepare your computer's settings: o Disable screen savers o Change the power saving scheme so that your computer is always on, and does not go to sleep or hibernate If during the labs, particularly when reloading configuration files, you see a message similar to the one shown below, the VM is waiting for a response from the FortiGuard server. To retry immediately, go to the console and enter the CLI command: execute update-now FortiGate I Student Guide 14 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate LAB 1–Introduction to FortiGate This lab provides an introduction to FortiGate's administrative CLI and GUI. Additionally, the lab will guide you through how to properly backup and restore a configuration file as well as create a new administrator account and modify administrative access permissions. Objectives Access the FortiGate CLI. Backup and restore configuration files. Find the FortiGate model and FortiOS firmware build information inside a configuration file. Create a new administrative user. Restrict administrative access. Time to Complete Estimated: 25 minutes FortiGate I Student Guide 15 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate 1 Working With the Command Line Interface You will start by accessing a FortiGate device using the command line interface (CLI.) Exploring the CLI The next steps will help you get familiar with the FortiGate CLI. To explore the CLI 1. In the virtual lab portal, click the Local-FortiGate icon to open the FortiGate console. (Alternatively, in the dropdown menu below the icon, click System > Open.) 2. At the login prompt, enter the username admin (all lower case) and leave the password blank. 3. Enter the following command: get system status This command displays basic status information about the FortiGate. The output includes the FortiGate's serial number, operation mode, and so on. When the --More--prompt appears in the CLI, press the spacebar to continue scrolling, press Enter to scroll one line at a time, or press Q to exit. 4. Enter the following command: get ? Note: The ? character is not displayed on the screen. This command shows all of the options that the CLI will accept after the get command. Depending on the command, you may need to enter additional words to completely specify a configuration option. 5. Press the Up Arrow key. This displays the previous get system status command. Try some of the other control key sequences that shown here: Action Command Previous command Up Arrow Next command Down Arrow FortiGate I Student Guide 16 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate Beginning of line CTRL+A End of line CTRL+E Back one word CTRL+B Forward one word CTRL+F Delete current character CTRL+D Clear screen CTRL+L Abort command and exit CTRL+C 6. Enter the command: execute ? This lists all options that the CLI will accept next after the execute command. 7. Type exe then press the Tab key. Notice that the CLI completes the current word. 8. Press the spacebar. After that, press the Tab key three times. Each time that you press the Tab key, the CLI replaces the second word with the next possible option for the execute command, in alphabetical order. Note: Almost all commands can be abbreviated. In presentations and labs, many of the commands that you see will be in abbreviated form. Use this technique to reduce the number of keystrokes that are required to enter a command. In this way, experts can often configure a FortiGate faster through the CLI than the GUI. If there are other commands that start with the same characters, your abbreviation must be long enough to be specific, so that FortiGate can distinguish them. Otherwise, the CLI will display an error message about ambiguous commands. 9. Enter the following CLI command to check the port3 interface configuration: show system interface port3 10. Enter this command: show full-configuration system interface port3 Stop and Think Compare both outputs. How are they different? The show full-configuration displays all the configuration settings for the interface. The show command displays only those whose values are different than the default values. FortiGate I Student Guide 17 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate 2 Configuration Backups During this lab exercise you will learn how to generate and restore clear-text and encrypted configuration backups. Restoring a Configuration From a Backup In this procedure you will restore a configuration from a backup. To restore a configuration from a backup 1. In the virtual lab portal, click the Local-Windows VM icon to open its VM. (Alternatively, in the dropdown menu below the icon, go to System > Open.) 2. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. Note: All the lab exercises were tested running Mozilla Firefox in Local-Windows VM and Remote-Windows. As a result, to get consistent results, we recommend using Firefox to access both the Internet and the FortiGate GUIs in this virtual environment. 3. Go to the Dashboard. (It should be the first screen that appears when you log in.) 4. In the System Information widget, click Restore. A dialog should appear where you can select which configuration backup file to restore. 5. Click Upload to select which backup file to restore. FortiGate I Student Guide 18 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate 6. On your desktop, select the file named Resources\FortiGate-I\Introduction\local-initial.conf, then click OK. Click OK again to confirm. After your browser uploads the configuration, the FortiGate will automatically reboot. 7. Refresh the web page and log in again to the Local-FortiGate GUI. 8. Go to Network > Interfaces and verify that the network interface settings were restored. 9. Go to Network > Static Routes. Verify that the default route was restored. Making Configuration Backups You will create a file with the backup of the FortiGate's current configuration. To make a configuration backup 1. In the Local-FortiGate GUI, go to the Dashboard. FortiGate I Student Guide 19 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate 2. In the System Information widget, click Backup. 3. Enable Encryption. 4. Enter the password fortinet twice and click the OK. 5. Save the encrypted configuration file to the Downloads folder. Caution: Always back up the configuration file before changing your device (even if the change seems minor or unimportant). There is no undo. Restoring a backup will allow you to quickly revert changes if you discover problems. Restoring an Encrypted Configuration Backup In this procedure you will restore the configuration backup that you created in the previous procedure. To restore an encrypted configuration backup 1. In the Local-FortiGate GUI, got to the Dashboard. 2. From the System Information widget, click Restore. 3. Click Upload and select the file that you downloaded in the previous procedure. 4. Click OK. Notice that, this time, you must enter the password fortinet. Comparing Both Configuration Files You will open both configuration files with Notepad++ and look at the differences. To compare both configuration files. 1. Start Notepad++ by clicking its icon in the Windows task bar: FortiGate I Student Guide 20 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate 2. Open the file with the encrypted configuration backup. 3. Start another instance of Notepad++ and open the initial file you restored: Resources\FortiGate-I\Introduction\local-initial.conf 4. Compare the details in both. Note: In both the clear-text and encrypted configuration files, the top acts as a header, listing the firmware and model information that this configuration belongs to. FortiGate I Student Guide 21 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate 3 Administrative Accounts FortiGate offers great flexibility for configuring administrator privileges. You can specify the IP addresses administrators are allowed to connect from. This lab includes some procedures related to working with administrative accounts. Creating an Administrator Profile In this procedure, you will create a new administrator profile with read-only access to most of the configuration settings. To configure an administrator profile 1. From the Local-FortiGate GUI, go to System > Admin Profiles. 2. Click Create New and create a new profile called Security_Admin_Profile. 3. Set Security Profile Configuration to Read-Write, but set all other permissions to Read Only. 4. Click OK to save the changes. Creating an Administrator Account In this procedure, you will create a new administrator account. The account will be assigned to the administrator profile created in the previous procedure. This administrator will have only read-only access to most of the configuration settings. To create an administrator account 1. In the Local-FortiGate GUI, go to System > Administrators. 2. Click Create New to add a new administrator account. Configure the following settings: Field Value User Name Security_Admin Password fortinet Confirm Password fortinet Type Local User Administrator Profile Security_Admin_Profile Note: Administrator names and passwords are case sensitive. You cannot include characters such as < > ( ) # " in an administrator account name or password. Spaces are allowed, but not as the first or last character. 3. Click OK to save the changes. FortiGate I Student Guide 22 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate Testing the New Administrator Account In this procedure you will confirm that the new administrator account has read-write access to only the security profiles configuration. To test the new administrator account 1. In the Local-FortiGate GUI, log out of the admin account's GUI session. 2. Log in as Security_Admin with the password fortinet. 3. Test this administrator’s access: try to create or modify settings that are not allowed by the account's profile. You should see that this account can only configure security profiles and monitor FortiGuard quotas (which are related to usage by security profiles). Restricting Administrator Access In this procedure you will restrict access to FortiGate administration. Only administrators connecting from a trusted subnet will be able to access. To restrict administrator access 1. In the Local-FortiGate GUI, log out of the Security_Admin account's GUI session. 2. Log in as admin. 3. Go to System > Administrators. 4. Edit the admin account. 5. Enable Restrict login to trusted hosts and set Trusted Host 1 to the address 10.0.2.0/24. 6. Click OK to save the changes. Testing the Restricted Access In this procedure you will confirm that administrators outside the subnet 10.0.2.0/24 cannot access the FortiGate. To test the restricted access 1. Log out of the admin account's GUI session. 2. Try to log in back using the admin account again. What is the result this time? FortiGate I Student Guide 23 DO NOT REPRINT © FORTINET LAB 1–Introduction to FortiGate Because you are trying to connect from the 10.0.1.10 address, you shouldn't be able to connect. This is because you restricted logins to only the source IP addresses in the list of trusted hosts. 3. In the virtual lab portal, click the Local-FortiGate, icon. (Alternatively, in the dropdown menu below its icon, go to System > Open.) 4. Enter the following CLI commands to add 10.0.1.0/24 as the second trusted IP subnet (Trusted Host 2) of the admin account: conf sys admin edit admin set trusthost2 10.0.1.0/24 end 5. Try to access its GUI again. Access should be restored. FortiGate I Student Guide 24 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring LAB 2–Logging and Monitoring In this lab, you will configure logging settings on the Local-FortiGate, configure alert email, and view logs. Objectives Configure logging on FortiGate so FortiGate understands how to log traffic. Configure threat weight. Monitor logs through alert emails. View logs in the Local-FortiGate GUI. Time to Complete Estimated: 15 minutes Prerequisites Before beginning this lab, you must restore a configuration file to FortiGate. To restore the FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. FortiGate I Student Guide 25 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring 4. Browse to Desktop > Resources > FortiGate-I > Logging and select local-logging.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 26 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring 1 Configuring Logging on FortiGate In order to record network activity, you must configure logging on FortiGate. In this exercise, you will configure the logging settings, including threat weight, and then enable logging on a firewall policy. Configuring Log Settings Configuring log settings does not directly generate logs on FortiGate. Rather, log settings define how logs are treated. For example, sending logs in real-time to FortiAnalyzer for storage, enabling local traffic logging, or enabling historical FortiView. In this exercise, you will enable disk logging so that information can appear in the FortiView dashboards, enable Event logging, and set the GUI to display logs from disk. To configure the log settings 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Log & Report > Log Settings. 3. Under Local Log, ensure Disk is enabled. If disk logging is disabled, only real-time logs will appear in the FortiView dashboards. 4. Under Log Settings, complete the following: Ensure Local Traffic Log is disabled. These logs record traffic directly to and from FortiGate and can quickly fill up your disk if not properly managed and monitored. For the purposes of this lab, leave this setting disabled. Ensure Event Logging is enabled and Enable All selected. Event logs provide all of the system information generated by the FortiGate device (they are not caused by traffic passing through firewall policies). However, it is good practice to track and monitor events that occur on FortiGate. 5. Under GUI Preferences, complete the following: FortiGate I Student Guide 27 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring Ensure logs are set to display from Disk. Ensure Resolve Hostnames is enabled. This requires FortiGate to perform reverse DNS lookups for all the IPs and makes searching logs easier. 6. Click Apply. Configuring Threat Weight Threat weight allows you to set the risk values for low, medium, high, and critical levels and then apply a threat weight to specific categories. To configure threat weight 1. In the Local-FortiGate GUI, go to Log & Report > Threat Weight. 2. Under Web Activity, move the slider to the far right to indicate a Critical (50) risk level for the following categories: Malicious Websites Hacking Explicit Violence Pornography 3. Click Apply. FortiGate I Student Guide 28 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring Enabling Logging on a Firewall Policy Now that your log settings are configured, you must enable logging on your firewall policy. Only when enabled on a firewall policy can a log message generate (based on configured log settings). To enable logging on a firewall policy 1. In Local-FortiGate, go to Policy & Objects > IPv4 Policy and edit the Full_Access firewall policy. 2. Under Security Profiles, enable Web Filter and select Category_Monitor from the associated drop-down list. The Category_Monitor web filter was pre-configured for you and is set to block the following categories: Potentially Liable, Adult/Mature Contents, and Security Risk. 3. Under Logging Options, enable Log Allowed Traffic and select All Sessions. Remember, you will not get logs of any kind if Log Allowed Traffic is not enabled. 4. Click OK. You've successfully enabled logging on your firewall policy. Later in this lab, you will test these logging settings. FortiGate I Student Guide 29 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring 2 Monitoring Logs Through Alert Email In this exercise, you will configure alert emails, run some traffic through the Local-FortiGate, and view alert emails. Configuring Alert Emails Since you can’t always be physically at the FortiGate device, you can monitor events by setting up alert email. Alert emails provide an efficient and direct method of notifying an administrator of events. Note: An SMTP mail server is required for alert email to operate. Since configuring a mail server is out of scope for this lab, it has been pre-configured for you. You can view the email service configuration through the FortiGate GUI under System > Advanced. To configure email alerts 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Log & Report > Alert E-mail. 3. Compete the following: Field Value Email from FortiGate@training.lab Email to admin@training.lab 4. Enable Send alert email for the following and complete the following: Enter an interval time of 1 minute Select Web access blocked Select Violation traffic detected 5. Click Apply. FortiGate I Student Guide 30 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring Running Traffic Through Local-FortiGate In order to generate multiple URL requests quickly so FortiGate can generate many different types of logs, you will use the wget application to perform a spider crawl. A spider crawl ensures no content is downloaded: only the URL is requested. This is enough to trigger content inspection. Note: wget is a free, open source utility for accessing websites. You can use it to quickly test your web filter settings in order to make sure you do not have any block messages with critical websites within your infrastructure. The pre-configured Web Filter security policy (Category_Monitor) that you enabled on your firewall policy is set to block many of the URLs you will request. Since you also enabled logging on all sessions in the firewall policy, FortiGate will generate web filter logs. To run traffic through Local-FortiGate 1. From the Local-Windows VM desktop, open a Windows command prompt and type the following command: blacklist-urls 2. Minimize the command prompt window so the command continues to execute and continue to the next procedure. Viewing Alert Emails Now that traffic is being sent through your FortiGate, you can check the admin@training.lab email to see if any alerts have been generated based on that traffic. You configured the alert email to generate an alert every 1 minute any time Web access is blocked and any time a violation in traffic is detected. The log message that accompanies an alert provides more details about the traffic that caused the alert. To view your alert emails 1. From the Local-Windows VM desktop, open Mozilla Thunderbird. 2. Select the inbox of the admin@training.lab email account and click Get Messages. You should see a message in the admin inbox with a subject of "Message meets Alert condition". If no email appears in the inbox, wait 30 seconds and click Get Messages again. 3. Open the email and review the log message. As you can see in the example below (you may receive a different log email), the log message header provides the type (utm) and subtype (webfilter) and the log message body provides information about the Web Filter security profile that was applied to the traffic (Category_Monitor), the action it took (blocked), and the category description of the traffic (Gambling). FortiGate I Student Guide 31 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring Search for this information in any of the subsequent logs messages that appear in your inbox so you can better identify and understand your logs. Note: To review more logs, click Get Messages in your admin inbox again. You configured your alert email to send messages that meet the alert condition every 1 minute. 4. Close the Thunderbird email client when you are done. FortiGate I Student Guide 32 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring 3 Viewing Logs in the FortiGate GUI In this exercise, you will view logs through both the Log & Report and FortiView menus of the FortiGate GUI. You will also configure filter options to locate specific logs. To view logs from Log & Report 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Log & Report > Forward Traffic to view logs from the Forward Traffic page. 3. To narrow down the logs (results), click Add Filter from the search bar and add some filters. For example: Select Date/Time and click Last 5 minutes to see the most recent logs generated. Select Security Action and Blocked to see all blocked traffic. Select Threat Score and enter >=50 to see all Web activity at the Critical (50) risk level. Remember you set Malicious Websites, Hacking, Explicit Violence, and Pornography to the critical risk level. Note: If the information on which you are filtering does not appear in the table, you may need to add the related column to the table. To do so, right-click any column in the table and select the column you want to add. For example, to view the Threat Score column, add Threat Score. The table refreshes with the new column added. 4. Go to Log & Report > Web Filter to view the logs from the Web Filter page. Note: The Web Filter logs section will not display if there are no web filtering logs. FortiGate will show it after creating logs. If this menu item does not display, log out from the FortiGate GUI and log in again to refresh it. 5. To narrow down the logs (results), click Add Filter from the search bar and add some filters. For example: FortiGate I Student Guide 33 DO NOT REPRINT © FORTINET LAB 2–Logging and Monitoring Select Action and Blocked to see all blocked traffic. Select Category Description and select a category. For example: Hacking. 6. Continue to the next procedure. To view logs from FortiView 1. In the Local-FortiGate GUI, go to FortiView > Web Sites. By default, the search settings are set to display logs being created now. If wget has stopped running and no more logs are being created currently, the page will be blank. This is expected. 2. Use the search settings to display the Web activity in a different way. For example: Select Categories and 1 hour to see the most accessed Web categories in the last hour. Click the table icon ( ) and select Bubble Chart. Use the Sort By drop-down list to display the information by Threat Score, Sessions, or Bytes. 3. Close the Windows command prompt to stop running traffic through Local-FortiGate. FortiGate I Student Guide 34 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies LAB 3–Firewall Policies Objectives Configure firewall objects and firewall policies. Configure source match options available firewall policies. Apply firewall service and schedule to firewall policy. Configure firewall policy logging options. Configure firewall policies based on device types. Reorder firewall policies. Read and understand logs. Use policy lookup to find matching policy. Time to Complete Estimated: 35 minutes Prerequisites Before beginning this lab, you must restore a configuration file to the Local-FortiGate. To restore the Local-FortiGate configuration file 1. On the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. FortiGate I Student Guide 35 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 3. Select to restore from Local PC and click Upload. 4. Browse to Desktop > Resources > FortiGate-I > Firewall-Policies and select localfirewall-policy.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 36 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 1 Creating Firewall Address Objects and Firewall Policies In this exercise, you will configure firewall address objects. You will also configure IPv4 firewall policy to which you will apply firewall address objects along with schedule, services and log options. Then you will test the firewall policy by passing traffic through it and check the logs for your traffic. At its core, FortiGate is a firewall, so almost everything that it does to your traffic is linked into your firewall policies. Creating Firewall Address Objects FortiGate has many pre-configured well known address object in factory default configuration. However if they don’t meet your organization needs you can configure more. To create a firewall address object 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > Addresses. 3. Go to Create New > Address. 4. Configure the following settings: Field Value Name LOCAL_SUBNET Type IP/Netmask Subnet / IP Range 10.0.1.0/24 Interface any 5. Click OK. Creating a Firewall Policy First, you will disable the existing firewall policy. Then, you will create more specific firewall policy using the firewall address object that you created in the previous procedure. You will also select specific services and configure log settings. To disable an existing firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right-click on the Seq.# column for Full_Access firewall policy. 3. Select Status and click Disable. To create a firewall policy 1. From the Policy & Objects > IPv4 Policy section, click Create New to add a new firewall policy. FortiGate I Student Guide 37 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 2. Configure these settings: Field Value Name Internet_Access Incoming Interface port3 Outgoing Interface port1 Source LOCAL_SUBNET Destination Address all Schedule always Service HTTP, HTTPS, DNS, ALL_ICMP, SSH (Tip: Type the name in the search box on right hand side and click on services to add.) Action ACCEPT NAT Enable Log Allowed Traffic Enable and select All Sessions Generate Logs when Session Starts Enable Enable this policy Enable 3. Leave all other settings at their default and click OK to save the changes. Note: When creating firewall policies, remember that FortiGate is a stateful firewall. As a result, you only need to create one firewall policy that matches the direction of the traffic that initiates the session. Testing the Firewall Policy and Viewing Generated Logs Now you have configured the firewall policy, you will test it by passing traffic through it and viewing the generated logs. To test and view logs for a firewall policy 1. From the Local-Windows VM, open a web browser and connect to various external web sites such as www.fortinet.com, www.bbc.com. 2. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 3. Right-click on the Seq.# column of the Internet_Access policy. 4. Click Show Matching Logs. FortiGate I Student Guide 38 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 5. Identify the log entries for your Internet browsing traffic. With the current settings, you should have many log messages with Accept: session start in Result column. These are the session start logs. When sessions close, you will have a separate log entry for the amount of data sent and received. Note: Logging session starts will generate twice the amount of log messages. You should use this option only when this level of detail is absolutely necessary. Note: When you click Show Matching Logs in the firewall policy, it adds Policy UUID filter in forward traffic logs. 6. In the Forward Traffic logs, click X to remove the Policy UUID filter. When you remove the Policy UUID filter, the logs shows unfiltered. We will use the logs in upcoming labs. 7. Close all other browser tabs except Local-FortiGate GUI. FortiGate I Student Guide 39 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 2 Reordering Firewall Policies and Firewall Policy Actions In the applicable interface pair’s section, FortiGate will look for a matching policy, beginning at the top. So usually you should put more specific policies at the top; otherwise, more general policies will match the traffic first, and your more granular policies will never be applied. In this exercise, you will create a new firewall policy with more specific settings such as source, destination, service and action set to deny. Then you will move this firewall policy above the existing firewall policies and observe the behavior of firewall policy reordering. Creating a Firewall Policy You will create a new firewall policy to match a specific source, destination, service, and action set to deny. Note: The firewall address LINUX_ETH1 with IP/Netmask 10.200.1.254/32 is preconfigured for you, and you will be using this address when you create the firewall policy. To create a firewall policy 1. On the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > IPv4 Policy and click Create New. 3. Configure these settings: Field Value Name Block_Ping Incoming Interface port3 Outgoing Interface port1 Source LOCAL_SUBNET Destination Address LINUX_ETH1 Schedule always Service PING (Tip: Type the name in the search box on right hand side and click on services to add.) Action DENY Log Violation Traffic Enable Enable this policy Enable 4. Click OK to save the changes. FortiGate I Student Guide 40 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies Adding Policy ID Column The policy sequence number defines the order in which firewall policies match the traffic from top to bottom. CLI commands use the policy ID instead of the policy sequence number. When policies are moved, the policy sequence number changes accordingly, but the value that sticks with the firewall policy is the policy ID. To add a policy ID Column 1. In to Policy & Objects > IPv4 Policy section, right-click on any of the column headings and select ID from Available Columns. 2. Scroll to the bottom and click Apply to save the changes. 3. You can drag the ID column to where you want it positioned in the column list. Testing the Reordering of a Firewall Policy Now that your configuration is ready, you will test by moving the Block_Ping firewall policy above Internet_Access firewall policy. The objective to confirm that after reordering the firewall policy, traffic is matched to a more specific firewall policy, the policy ID remains same, and sequence number changes. To confirm traffic matches to a more granular firewall policy after reordering the firewall policy 1. From the Local-Windows VM, open a command prompt. 2. Ping the destination address (LINUX_ETH1) that you configured in the Block_Ping firewall policy. ping –t 10.200.1.254 If you have not changed the rule ordering, the ping should still work because it matches the ACCEPT policy and not the DENY policy that you created. This demonstrates the behavior of policy ordering. The Block_Ping policy was never checked, because the traffic matched the policy at the top (Internet_Access). 3. Leave this window open and perform the next step. FortiGate I Student Guide 41 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 4. In the Policy & Objects > IPv4 Policy section, notice the current Seq.# number and ID (policy ID) for both of these firewall policies. 5. Click the Seq.# for the Block_Ping firewall policy. 6. Drag it above the Internet_Access firewall policy. When you move up the Block_Ping policy, the Seq.# number changes, but ID (policy ID) remains the same. 7. Return to the Local-Windows VM and look at the command prompt window that is still running the continuous ping. You should see that the traffic is now blocked and the replies appear as Request timed out. This demonstrates the outcome of the policy reordering. After moving the more granular policy above the general access policy, the traffic is matched to the more granular policy and, based on the action DENY, the traffic stops processing. 8. Close the command prompt window. FortiGate I Student Guide 42 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 3 Device Identification FortiGate can match the traffic by device type by selecting the device in the source field. There are two types of device identification: Agentless device identification uses traffic from the device and devices indexed by their MAC address. Agent-based device identification uses FortiClient which send its unique FortiClient ID to FortiGate. In this lab, you will use the agentless device identification technique. You will add the device in the source field to the existing firewall policy and observe the firewall policy source matching behavior. Disabling Existing Firewall Policy First, you will disable the Block_Ping firewall policy and your traffic will match to the Internet_Access firewall policy. To disable existing firewall policy 1. On the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > IPv4 Policy. 3. Right-click on the Seq.# column for Block_Ping firewall policy. 4. Select Status and click on Disable. Configuring and Testing Device Identification Now, you will run a continuous ping to an IP address. To test the firewall policy source matching behavior, you will add a non-matching device, such as Linux PC, to the source field. To configure and test device identification 1. On the Local-Windows VM, open a command prompt. 2. Run a continuous ping to 10.200.1.254. Enter: ping –t 10.200.1.254 3. In the Policy & Objects > IPv4 Policy on the Local-FortiGate GUI, right click the Seq.# column for Internet_Access firewall policy. 4. Click Edit. 5. Select Source. 6. On the right hand side, select Device. 7. Click Linux PC. You are choosing a device type that doesn’t match your device (Windows). FortiGate I Student Guide 43 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 8. Click OK. FortiGate will notify you that this action enables device identification on the source interface. 9. Click OK. Note: If you enable a source device type in the firewall policy, FortiGate enables device detection on the source interface(s) of the policy, 10. Return to the command prompt on the Local-Windows VM, where you were running continuous ping. You should see that traffic is blocked. 11. On the Local-Windows VM, try browsing the Internet by opening web browsers and connecting to various external web sites such as www.fortinet.com, www.bbc.com. Confirm the firewall blocks this traffic. The traffic is blocked because the source device type in the firewall policy is set to Linux-PC, which does not match the Windows device from which the traffic is generated. Modify the Implicit Deny Firewall Policy FortiGate checks from top to bottom to find a firewall policy that matches the traffic. If none of the firewall policies match the traffic, the default implicit deny firewall policy drops the traffic. To confirm that the traffic is dropped by the implicit deny policy, you will enable logging on the implicit firewall policy and then check the logs. To enable logging on the implicit deny firewall policy 1. In Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click the Seq.# column for the Implicit Deny firewall policy. FortiGate I Student Guide 44 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 3. Click Edit. 4. Enable Log Violation Traffic. 5. Click OK. To confirm traffic is dropped by the implicit deny firewall policy 1. In Local-FortiGate GUI, go to Log & Report > Forward Traffic. 2. Confirm there are logging entries for the denied ping traffic. Reconfiguring Device Identification Now you will edit the Internet_Access firewall policy and add a Windows PC to match your LocalWindows VM. You will see that the traffic will be allowed by this policy after you add a matching source device. To reconfiguring device identification 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click on the Source column for the Internet_Access firewall policy. 3. Click Select Entries. 4. Click Device. 5. Click Windows PC to select it. 6. Click Linux PC to unselect it. 7. Click OK. To confirm traffic is allowed by a firewall policy 1. On the Local-Windows VM, return to the continuous ping that you started previously. You should see that traffic is allowed. 2. Close the command prompt window. 3. On the Local-Windows VM, try browsing the Internet by opening web browsers and connecting to various external web sites such as www.yahoo.com, www.google.com. FortiGate I Student Guide 45 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies Confirm that the firewall allows this traffic. Viewing the Details of an Identified Device Once a device is identified, FortiGate updates its list of devices and caches the list to the flash disk to speed up detection. You can view the details of an identified device. These details include device type, detection method, and IP address to name a few. To view the details of identified device 1. In the Local-FortiGate GUI, go to User & Device > Device Inventory. 2. Click the + sign to expand the list. 3. Review the details of your detected host device. You can see device details, such as IP address, interface, status, and more. 4. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 5. Log in as admin and execute the following command to view detection method and other device details: diagnose user device list Adding an Identified Device to the Configuration File The identified device is cached on the FortiGate and is not added to the configuration file. You will be adding the identified device to the configuration file by adding an alias to the device. To add an identified device to the configuration file 1. In a LOCAL-FORTIGATE PuTTY session, run the following command to confirm that there are no devices in the configuration file: FortiGate I Student Guide 46 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies show user device 2. In the Local-FortiGate GUI, go to User & Device > Device Inventory. 3. Click on your device. 4. Click Edit. 5. Configure the following: Field Alias Value MyDevice This creates a static device in the configuration file. 6. Click OK. 7. In the LOCAL-FORTIGATE PuTTY session, run the following command to confirm that the device now appears in the configuration file as a permanent device: show user device 8. In the Local-FortiGate GUI, go to User & Device > Custom Devices & Groups. Note that your device is listed under Custom Devices. Adding a Custom Device to the Firewall Policy Now that you've added your device as a custom device, you'll add it to the firewall policy. To add a custom device to the firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click the Source column for Internet_Access firewall policy. 3. Click Select Entries. 4. Click Device on the right hand side. 5. Click Windows PC to unselect it. 6. Under CUSTOM DEVICE, click MyDevice to select it. 7. Click OK. To confirm traffic is allowed by the firewall policy 1. On the Local-Windows VM, try browsing the Internet by opening web browsers and connecting to various external web sites such as www.yahoo.com, www.google.com. Confirm that the firewall allows this traffic. FortiGate I Student Guide 47 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies 4 Policy Lookup FortiGate can find a matching firewall policy based on the policy lookup input criteria. It is basically creating packet flow over FortiGate without real traffic. From this packet flow, the FortiGate can extract a policy ID and highlight it on the GUI policy configuration page. In this lab, you will use the policy lookup feature to find matching firewall policy based on input criteria. Enabling Existing Firewall Policies As they were during the configuration and testing the of the firewall policies in the previous labs, most of the configured firewall policies are currently disabled. Now, you will enable the existing firewall policies. To enable existing firewall policies 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > IPv4 Policy. 3. Right-click on the Seq.# column for the Fortinet firewall policy. 4. Select Status and click Enable. 5. Right-click the Seq.# column for the Full_Access firewall policy. 6. Select Status and click Enable. Setting Up and Testing Policy Lookup Criteria Now, you will set up the policy lookup criteria. FortiGate will search and highlight the matching firewall policy based on your input criteria. To set up and test policy lookup criteria 1. In the Policy & Objects > IPv4 Policy, click Policy Lookup. 2. Set the following: Field Value Source Interface port3 Protocol TCP Source 10.0.1.100 Source Port Leave it blank Destination fortinet.com Destination Port 443 3. Click Search. The search will match the Full_Access policy, but not the more specific firewall policy, Fortinet. FortiGate I Student Guide 48 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies In the search criteria, the source address is set to 10.0.1.100. This source address is not a part of firewall policy named Fortinet; therefore, the search does not match the Fortinet firewall policy. Note: When the FortiGate is performing policy lookup, it does a series of checks on ingress, stateful inspection, and egress for the matching firewall policy. It performs the checks from top to bottom, before providing results for the matching policy. 4. Click Policy Lookup and change the Source to 10.0.1.10. Make sure all the other settings match the settings you used in step 2. 5. Click Search. This time the search matches policy named Fortinet, in which destination is set to FQDN. Reordering the Firewall Policy Now you will reorder the firewall policies. You will be moving the Block_Ping firewall policy above the Full_Access policy. To reorder the firewall policy 1. In Policy & Objects > IPv4 Policy, click the Seq.# column for the Block_Ping firewall policy. 2. Drag it above the Full_Access firewall policy. 3. The order of your firewall policies should look similar to this: Retesting Policy Lookup After Reordering the Firewall Policies Now you will test the policy lookup feature after reordering the firewall policies. FortiGate I Student Guide 49 DO NOT REPRINT © FORTINET LAB 3–Firewall Policies To retest policy lookup after reordering firewall policies 1. In Policy & Objects > IPv4 Policy, click Policy Lookup. 2. Set the following for Policy Lookup: Field Value Source Interface port3 Protocol ICMP ICMP Type 8 ICMP Code 0 Source 10.0.1.100 Destination 10.200.1.254 3. Click Search. The search will match the Full_Access policy, but not the more specific policy Block_Ping, because it is disabled. 4. Right click the Seq.# column of the Block_Ping policy and set the Status to Enable. 5. Click Search. This time the search matches more specific and enabled policy, Block_Ping. FortiGate I Student Guide 50 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) LAB 4–Network Address Translation (NAT) NAT is used to perform source NAT and destination NAT for the traffic passing through FortiGate. There are two ways to configure source NAT (SNAT) and destination NAT (DNAT). firewall policy NAT central NAT In this lab, you will configure and test firewall policy NAT for SNAT using IP pool, and for DNAT using virtual IP (VIP). You will also enable central NAT. You will configure and test SNAT using central SNAT policy and DNAT using DNAT policy and VIPs. Objectives Configure destination NAT settings using a VIP. Configure the source NAT settings using overload IP pools. Enable central NAT. Configure a central NAT policy for the source NAT. Configure DNAT and VIPs for the destination NAT . Time to Complete Estimated: 50 minutes Prerequisites Before starting the procedures in this lab, you must restore a configuration file to each FortiGate. Note: Make sure to restore the correct configuration in each FortiGate as following the steps below. Failure to restore proper configuration in each FortiGate will prevent you from doing the lab exercise. To restore the Remote-FortiGate configuration file 1. On the Local-Windows VM, open a web browser and log in as admin to the Remote-FortiGate GUI at 10.200.3.1. 2. Go to Dashboard, and from the System Information widget click Restore. FortiGate I Student Guide 51 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 3. Select to restore from Local PC and click Upload. 4. Browse to Desktop > Resources > FortiGate-I > NAT and select remote-nat.conf. 5. Click OK. 6. Click OK to reboot. To restore the Local-FortiGate configuration file 1. On the Local-Windows VM, open a new web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. 4. Browse to Desktop > Resources > FortiGate-I > NAT and select local-nat.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 52 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 1 Access Through VIPs VIP addresses are typically used to NAT external or public IP addresses to internal or private IP addresses. In this exercise, you will configure a VIP address for the Local-Windows VM. Then you will create an egress-to-ingress firewall policy and apply a VIP address. This will allow Internet connections to the Local-Windows VM. You will also verify the destination NAT and source NAT behavior using CLI commands. Creating a VIP In FortiGate, a VIP is a destination NAT (DNAT) and can only be selected in a firewall policy’s destination address field. In this procedure, you will configure the VIP to map the Local-Windows VM (10.0.1.10) to 10.200.1.200, which is a part of the port1 subnet. You can refer to the diagram for the lab network topology. To create a VIP 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > Virtual IPs. 3. Click Create New and select Virtual IP. 4. Configure the following: Field Value Name VIP-INTERNAL-HOST Interface port1 (port1 is connected to the Internet with IP address 10.200.1.1/24.) External IP Address/Range 10.200.1.200 - 10.200.1.200 (This is the IP address in the same range as the port1 subnet.) Mapped IP Address/Range 10.0.1.10 5. Click OK. Creating a Firewall Policy You will configure a firewall policy using the VIP that you just created as the destination address. To create a firewall policy 1. In Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Click Create New. FortiGate I Student Guide 53 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 3. Configure these settings: Field Value Name Web-Server-Access Incoming Interface port1 Outgoing Interface port3 Source all Destination Address VIP-INTERNAL-HOST Tip: Listed under the Virtual IP section Schedule always Service HTTP, HTTPS Tip: Use the search field to locate the services. Action ACCEPT 4. Under Firewall/Network Options, disable NAT. 5. Under Logging Options, enable Local Allowed Traffic and select All Sessions. 6. Click OK. Testing the VIP Firewall Policy Now that you've configured a firewall policy with the VIP address as the destination, you can test your VIP by accessing it from the Remote-Windows VM, which is behind Remote-FortiGate. Traffic is routed from the Remote-FortiGate to the Local-FortiGate by a Linux machine, which is acting as a router between these two FortiGates. For more information, see the network topology diagram. You will also test how the source address is NATed by the VIP when traffic is leaving from the LocalWindows VM. To test VIPs (DNAT) 1. From the Remote-Windows VM, open a web browser and access the following URL: http://10.200.1.200 If the VIP operation is successful, a simple web page appears. 2. Go back to the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 3. Log in as admin and execute the following command to check the destination NAT entries in the session table: get system session list Sample output: Local-FortiGate# get system session list PROTO EXPIRE NAT FortiGate I Student Guide SOURCE SOURCE-NAT DESTINATION DESTINATION- 54 DO NOT REPRINT © FORTINET tcp 3594 10.200.3.1:49478 LAB 4–Network Address Translation (NAT) - 10.200.1.200:80 10.0.1.10:80 You will notice that the destination address 10.200.1.200 is translated to 10.0.1.10, which is the mapping you configured in the VIP. Testing Source NAT As a result of the VIP (which is a static NAT), all NATed outgoing connections from the Local-Windows VM (IP address 10.0.1.10) will use the VIP address to source NAT for the ingress-to-egress firewall policy and not the egress interface IP address. To test SNAT 1. Return to the PuTTY session the for the Local-FortiGate and execute the following command to clear any existing sessions: diagnose sys session clear Note: The firewall is stateful, so any existing sessions will not use this new firewall policy until they time out or are cleared for ingress-to-egress traffic. This clears the session to the Local-FortiGate from the Local-Windows VM. 2. Close the PuTTY window. 3. In the Local-Windows VM, open a web browser tab and connect to a few websites. For example: www.fortinet.com www.yahoo.com www.bbc.com 4. Go back to the Local-Windows VM, open a PuTTY window, and connect to the LOCALFORTIGATE saved session (connect over SSH). 5. Log in as admin and execute the following command to view the session information: get system session list Sample output: FortiGate I Student Guide 55 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) Note that the outgoing connections from the Local-Windows VM are now being NATed with the VIP address 10.200.1.200, instead of the firewall egress interface IP address (10.200.1.1). This is a behavior of the SNAT VIP. That is, when you enable SNAT on a policy, a VIP static NAT takes priority over the destination interface IP address. 6. Close PuTTY. 7. Close all browser windows except the Local-FortiGate. FortiGate I Student Guide 56 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 2 Dynamic NAT with IP pools IP pools are used to translate the source address to an address from that pool, rather than the egress interface address. Currently, the Local-FortiGate translates the source IP address of all traffic generated from the LocalWindows VM to 10.200.1.200 because of the SNAT translation in the VIP. In this exercise, you will create an IP pool, apply it to ingress-to-egress firewall policy, and verify the SNAT from CLI commands. Creating an IP Pool In this procedure, you will create an IP pool from the range of public IP addresses available on egress port (port1). To create an IP pool 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > IP Pools. 3. Click Create New and configure the following settings: Field Value Name INTERNAL-HOST-EXT-IP Type Overload External IP Range/Subnet 10.200.1.100 - 10.200.1.100 4. Click OK. Editing a Firewall Policy to Use the IP Pool Now you will apply the IP pool to change the behavior from static NAT to dynamic NAT on ingress-toegress firewall policy. To edit firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right-click the Seq.# column for Full_Access firewall policy. 3. Click Edit. 4. Under Firewall/Network Options, configure the following settings: Field Value NAT Enabled IP Pool Configuration Use Dynamic IP Pool Click + and select INTERNAL-HOST-EXT-IP FortiGate I Student Guide 57 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) Your configuration will look similar to: 5. Click OK. Testing Dynamic NAT with IP Pools Now that your configuration is ready, you can test dynamic NAT with IP pools by browsing to a few external sites on the Internet. If successful, you will see that the Local-Windows VM IP address (10.0.1.10) is source NATed to the IP pool address of 10.200.1.100. To test dynamic NAT with IP pools 1. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Log in as admin and execute the following command to clear any existing sessions: diagnose sys session clear Note: The firewall is stateful, so any existing sessions will not use this updated firewall policy until they time out or are cleared for ingress-to-egress traffic. 3. Close the PuTTY window. 4. In the Local-Windows VM, connect to a few websites. For example: www.fortinet.com www.yahoo.com www.bbc.com 5. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 6. Log in as admin and execute the following command to verify the source NAT IP address that those sessions are using: get system session list FortiGate I Student Guide 58 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) Sample output: Notice that the source NAT address is now 10.200.1.100 as configured in the IP pool, and the IP pool has overridden the static NAT VIP. 7. Close PuTTY. 8. Close all browser windows except Local-FortiGate. FortiGate I Student Guide 59 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 3 Enabling Central NAT In central NAT, SNAT and DNAT configurations are per virtual domain (VDOM). The SNAT and DNAT configurations are automatically applied to multiple firewall policies (according to the SNAT and DNAT rules that you specify), as opposed to each firewall policy in the firewall policy NAT. Enabling Central NAT In this procedure, you will enable central NAT. Central NAT can only be enabled and disabled from the CLI. To enable central NAT 1. From the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Log in as admin and try to configure the following: config system settings set central-nat enable end You will get a message similar to one below: Note: When enabling central NAT, you must remove VIP and IP pool references from the existing firewall policies first. The (id=N) is the firewall policy ID reference, not Seq.#, on the GUI. Adding a Policy ID Column In this procedure, you will check that the ID column is displayed in the IPv4 Policy table, so you can more easily determine which firewall policy is associated with which policy ID. In this instance, you need to determine which policy is id=1, as per the CLI error message above. To add the Policy ID column 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > IPv4 Policy. 3. Check if the ID column is already displayed. If it is not, right-click any of the column headings, select ID under Available Columns and click Apply. FortiGate I Student Guide 60 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) Tip: You can drag the ID column to where you want it positioned in the column list. You can now see that the Full_Access firewall policy is policy ID 1. Modifying the Firewall Policy In this procedure, you will remove the IP pool from the Full_Access firewall policy (policy ID 1), as central NAT can only be enabled if none of the firewall policies have IP pool or VIP addresses associated with them. To modify the firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click Seq.# of the Full_Access firewall policy and select Edit. 3. Under Firewall/Network Options, modify the following settings: Field Value NAT Enabled IP Pool Configuration Use Outgoing Interface Address 4. Click OK. Enabling Central NAT Again After Removing the IP Pool Now that you've removed the IP pool from the firewall policy, you can try to enable central NAT again. To try to enable central NAT 1. In the Local-Windows VM, go to the LOCAL-FORTIGATE PuTTY session you opened earlier. FortiGate I Student Guide 61 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 2. Try to enable central NAT again: config system settings set central-nat enable end This time you will get similar message for VIP firewall policy (id=2). Since you already added the ID column to the IPv4 Policy page, it shows that policy ID 2 is the firewall policy labeled Web-Server-Access. Modifying the Firewall Policy In this procedure, you will remove the VIP address from the Web-Server-Access firewall policy (policy ID 2), because central NAT can only be enabled if none of the firewall policies have IP pool or VIP addresses associated with them. To modify the firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click on Seq.# of the Web-Server-Access firewall policy and click Edit. 3. Change the Destination Address to all. 4. Scroll to the bottom of the page and disable the policy. 5. Click OK. Enabling Central NAT Now that you have modified the firewall policies to remove the IP pool and VIP addresses, you can finally enable central NAT. To enable central NAT after removing IP pool and VIP address from firewall policies 1. In the Local-Windows VM, go to the LOCAL-FORTIGATE PuTTY session you opened earlier. 2. Enable central NAT: config system settings set central-nat enable FortiGate I Student Guide 62 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) end 3. In the Local-FortiGate GUI, refresh your browser for GUI changes to take effect. 4. Go to Policy & Objects > IPv4 Policy. You will see two options in the left menu: Central SNAT DNAT & Virtual IPs 5. Close the PuTTY window. FortiGate I Student Guide 63 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 4 Configuring Central SNAT A central SNAT policy is applied to multiple firewall policies, based on configured central rule. The NAT on the firewall policy controls whether the central SNAT is used or not. In this exercise, you will configure a central SNAT policy and test it. Deleting DNAT and VIPs When central NAT is enabled, existing VIPs take precedence over source NAT. As such, you need to delete the VIP object you added in a previous exercise so you can test the source NAT. To delete DNAT and VIPs 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > DNAT & Virtual IPs. 3. Right click VIP-INTERNAL-HOST and click Delete . 4. Click OK. Testing SNAT Without an SNAT Policy In this procedure, you will test the behavior of FortiGate when an SNAT policy is not configured. To test SNAT Without an SNAT policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IP Pools. 2. Review the settings of INTERNAL-HOST-EXT-IP. 3. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 4. Log in as admin and execute the following command to clear the existing sessions. diagnose sys session clear 5. Close the PuTTY window. 6. In the Local-Windows VM, open a web browser and connect to a few websites. For example: www.fortinet.com www.yahoo.com www.bbc.com 7. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 8. Log in as admin and execute the following command to verify the SNAT IP address that those sessions are using: get system session list FortiGate I Student Guide 64 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) Sample output: Notice that the SNAT address is now 10.200.1.1, which is the egress interface IP (port1). Note: If no central SNAT or matching central SNAT rule exists, FortiGate automatically uses the outgoing interface IP address for the source NAT. 9. Close PuTTY. 10. Close all other browser tabs except the Local-FortiGate GUI. Configuring Central SNAT Policy In this procedure, you will configure a central SNAT policy using the IP pool previously created in the last exercise. To configure a central NAT policy 1. In the Local-FortiGate GUI, go to Policy & Objects > Central SNAT. 2. Click Create New and configure the following: Field Value Source Address all Destination Address all Translated Address INTERNAL-HOST-EXT-IP Protocol ANY 3. Leave all other settings at their defaults and click OK to save the changes. Verifying that NAT is Enabled on the Firewall Policy If NAT is enabled on the firewall policy, central SNAT is used. In this procedure, you will verify that NAT is enabled on the firewall policy. FortiGate I Student Guide 65 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) To verify that NAT is enabled on firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Review the NAT column of the Full_Access policy to make sure NAT is enabled. Note: There is no option for IP pools. In central SNAT, NAT on the firewall policy controls if the central SNAT is used or not. If NAT is enabled on the firewall policy, central SNAT is used. Testing Central SNAT in the Presence of SNAT Policy Now that your configuration is ready, you can test the behavior of the central SNAT policy. To test central SNAT in presence of SNAT policy 1. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Log in as admin and execute the following command to clear the existing sessions: diagnose sys session clear 3. Close the PuTTY window. 4. In the Local-Windows VM, connect to a few websites. For example: www.fortinet.com www.yahoo.com www.bbc.com 5. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 6. Log in as admin and execute the following command to verify the source NAT IP address that those sessions are using: get system session list Sample output: Notice that the source NAT address is now 10.200.1.100, which matches the central SNAT policy. FortiGate I Student Guide 66 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 7. Close PuTTY. 8. Close all other browser tabs except Local-FortiGate GUI. Creating a Second IP Pool Now you will create a second IP Pool, which will be used later when creating a second central SNAT policy. To create a second IP Pool 1. In the Local-FortiGate GUI, go to Policy & Objects > IP Pools. 2. Click Create New and configure the following: Field Value Name SNAT-Pool Type Overload External IP Range/Subnet 10.200.1.50 - 10.200.1.50 3. Click OK. Creating a Second SNAT Policy Now you will create a more granular SNAT policy by selecting a specific destination address and protocol to match specific traffic. To create second SNAT policy 1. In the Local-FortiGate GUI, go to Policy & Objects > Central SNAT. 2. Click Create New and configure the following: Field Value Source Address all Destination Address REMOTE_FORTIGATE Translated Address SNAT-Pool Protocol TCP 3. Click OK. Reordering Central SNAT Policies Now you will reorder the central NAT policies to put the more granular rule on top. Similar to firewall policies, central SNAT policy is processed from top to bottom, and if a match is found, the source address and source port translate based on that central SNAT policy. FortiGate I Student Guide 67 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) To reorder central SNAT policies 1. In the Local-FortiGate GUI, go to Policy & Objects > Central SNAT. 2. Drag the newly created central SNAT policy above the previously created central SNAT policy. Testing Central SNAT Now that your configuration is ready, you can test the central SNAT configuration. To test central SNAT 1. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Log in as admin and execute the following command to clear the existing sessions: diagnose sys session clear 3. Again open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 4. Log in as admin. 5. From the Local-Windows VM, open a web browser and log in as admin to the Remote-FortiGate GUI at 10.200.3.1. 6. In the Local-Windows VM, open a command prompt. 7. Run continuous ping to the Remote-FortiGate IP: ping 10.200.3.1 -t 8. In the Local-Windows VM, connect to a few websites. For example: www.fortinet.com www.yahoo.com www.bbc.com 9. In the Local-Windows VM, go back to PuTTY session and list the sessions by running following CLI command: get system session list Notice that the TCP sessions to destination 10.200.3.1 are source-NATed 10.200.1.50, as it matches the central SNAT policy. Sample output: FortiGate I Student Guide 68 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) ICMP sessions to destination 10.200.3.1 are source-NATed 10.200.1.100, which matches the central SNAT policy at the bottom. Sample output: Also, other TCP sessions to different destinations are translated to 10.200.1.100 based on the matching central SNAT policy at the bottom. Note: A Central SNAT policy is processed from top to bottom, similar to firewall policies. 10. Close the command prompt and PuTTY. 11. Close all other browser tabs except the Local-FortiGate GUI. FortiGate I Student Guide 69 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 5 DNAT and VIPs In firewall policy NAT, Virtual IPs is selected in the firewall policy as the destination address. In central NAT, as soon as DNAT & Virtual IPs is configured, FortiGate automatically creates a rule in the kernel to allow DNAT to occur and no additional configuration is required. In this exercise, you will configure and test the behavior of central DNAT. Creating DNAT and VIPs In this procedure, you will configure DNAT and VIPs. To create DNAT and VIPs 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Policy & Objects > DNAT & Virtual IPs. 3. Click Create New and select DNAT & Virtual IP. 4. Configure the following settings: Field Value Name Central-DNAT Interface port1 Type Static NAT (default setting) External IP Address/Range 10.200.1.150 - 10.200.1.150 Mapped IP Address/Range 10.0.1.10 5. Click OK. Verifying the Firewall Policy Settings You will now verify the firewall policy settings for the egress-to-ingress firewall policy. To verify the firewall policy settings 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click Seq.# of the Web-Server-Access firewall policy and click Edit. 3. Review the settings of firewall policy. 4. Try to select the DNAT & Virtual IPs address in firewall destination address. You will be not able to do so. Note: VIPs previously created cannot be selected in a firewall policy as a destination address. As soon as a VIP is created, FortiGate automatically creates a rule in the kernel for DNAT to occur. FortiGate I Student Guide 70 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) 5. Scroll to the bottom and enable the firewall policy 6. Click OK. Testing DNAT and VIPs In this procedure, you will test DNAT and V IPs by accessing the Local-Windows VM. To test DNAT and VIPs 1. From the Remote-Windows, open a web browser and access the following URL: http://10.200.1.150 If the VIP operation is successful a simple web page appears. 2. Go back to Local-Windows VM and open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 3. Log in as admin and execute the following command to check the destination NAT entries in the session table: get system session list Sample output: Local-FortiGate # get system session list PROTO EXPIRE tcp 3599 SOURCE SOURCE-NAT 10.200.3.1:49183 - DESTINATION 10.200.1.150:80 DESTINATION-NAT 10.0.1.10:80 4. In the Local-Windows VM, open a web browser and try to access few websites. For example: www.fortinet.com www.yahoo.com www.bbc.com 5. Go back to PuTTY for LOCAL-FORTIGATE and verify the SNAT IP address those sessions are using: get system session list Sample output: FortiGate I Student Guide 71 DO NOT REPRINT © FORTINET LAB 4–Network Address Translation (NAT) Notice that the session originating from source IP 10.0.1.10 are source NATed to 10.200.1.150 (VIP) as opposed to the central SNAT policy pool IP of 10.200.1.100. This is expected behavior in central NAT. Note: If both the SNAT and DNAT are defined, the egress traffic will source NAT to the DNAT/VIP address, as opposed to the configured source SNAT policy. 6. Close PuTTY. 7. Close all other browser tabs except Local-FortiGate GUI. FortiGate I Student Guide 72 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication LAB 5–Firewall Authentication In this lab, you will configure FortiGate to communicate with a remote LDAP server for server-based password authentication. You will also configure captive portal, so that any user connecting to the network is prompted for their login credentials (active authentication). Objectives Configure server-based password authentication with an LDAP server. Configure captive portal so users connecting to your network are forced to authenticate. Time to Complete Estimated: 20 minutes Prerequisites Before beginning this lab, you must restore a configuration file to FortiGate. To restore the FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. FortiGate I Student Guide 73 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 4. Browse to Desktop > Resources > FortiGate-I > Firewall-Authentication and select localfirewall-authentication.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 74 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 1 Remote Authentication In this exercise, you will configure an LDAP server on FortiGate for remote authentication, create a remote authentication group for your remote users, and add that group as a source in a firewall policy. Finally, you will authenticate over SSL-VPN as one of the remote users, and then monitor the login as the administrator. Configuring an LDAP Server on FortiGate You can configure FortiGate to point to an LDAP server for server-based password authentication using the pre-configured Active Directory service located on the Local-Windows VM. Active Directory already has users available to use in this lab. To configure an LDAP Server on FortiGate 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to User & Device > LDAP Servers and click Create New. 3. Complete the following: Field Value Name ADserver Server IP/Name 10.0.1.10 This is the IP address of the Windows Server, LocalWindows VM. For more information, see Network Topology. Server Port 389 This is the default port for LDAP. Common Name Identifier cn This is the attribute name used to find the user name. Active Directory calls this cn. Distinguished Name ou=Training,dc=trainingAD,dc=training,dc=lab This is the domain name for Active Directory on the Windows Server. Active Directory has already been pre-configured, with all users located in the Training organizational unit (ou). Bind Type Regular User DN cn=ADadmin,cn=users,dc=trainingAD,dc=training,dc=lab We are using the credentials of an Active Directory user called ADadmin to authenticate to Active Directory. ADadmin is located in the Users organizational unit (ou). Password Training! This is the password pre-configured for the ADadmin user. You must use it to be able to bind. 4. Click Test. FortiGate I Student Guide 75 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication You should receive an indication of a successful connection. 5. Click OK. Assigning Remote Users to a Firewall Group In this procedure, you will assign a user located on the LDAP server to a firewall user group called Remote-users on FortiGate. This way, you can configure firewall policies to act on the firewall user group. Generally, groups are used to more effectively manage individuals that have a shared relationship. Note: The Remote-users group was pre-configured for you. However, it needs to be modified to add the users from the remote LDAP server you just configured in the last procedure. To assign a user to a user group 1. In the Local-FortiGate GUI, go to User & Device > User Groups and edit the Remote-users group. As you can see, it's currently configured as a firewall group. 2. To add users from the remote LDAP server, click Create New from the Remote groups table. The Add Group Match dialog box appears. 3. From the Remote Server drop-down list, select ADserver. 4. From the LDAP Groups table, click AD-users under the Group tab in the main window and click the Add Selected button that appears. AD-users will appear disabled with a green checkmark, indicating it has been added. FortiGate I Student Guide 76 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 5. Click OK. The users in this Active Directory group are now included in your FortiGate Remote-users firewall user group. Only users from the remote LDAP server that match this user group entry can authenticate. 6. Click OK. Adding the Remote User Group to your Firewall Policy Now that the LDAP server is added to the Remote-user firewall user group, you can add the group to a firewall policy. This allows you to control access to network resources, as policy decisions are made on the group as a whole. Since your remote user on your LDAP server will be authenticating over SSL-VPN, you will add the group to an SSL-VPN firewall policy. Note: Configuring SSL-VPN is out of scope for this lab. As such, the SSL-VPN settings have been pre-configured for you. However, you still need to configure an SSL-VPN firewall policy and add the Remote-user group to it. To add the remote user group to your firewall policy 1. In the Local-FortiGate GUI, go to VPN > SSL-VPN Settings and click the warning message at the top of the page. Clicking this warning message will create a new SSL-VPN policy for you using these preconfigured settings. Complete the following: FortiGate I Student Guide 77 DO NOT REPRINT © FORTINET Field LAB 5–Firewall Authentication Value Name SSL-VPN Outgoing Interface port1 Source LOCAL_SUBNET Remote-users (located under User) Destination Address all Schedule always Service ALL Action ACCEPT 2. Under Security Profiles, enable Web Filter and select Category_Monitor. This Web Filter was pre-configured for you and is set to block the following categories: Potentially Liable, Adult/Mature Contents, and Security Risk. 3. Under Logging Options, enable Log Allowed Traffic and select All Sessions. 4. Click OK. 5. Click OK. The SSL-VPN Settings page re-appears. Note that web mode access for SSL VPN is listening at https://10.0.1.254:10443. To test whether aduser1 will be able to successfully authenticate 1. Test to see whether aduser1 will be able to successfully authenticate: A. Open PuTTY on Local-Windows VM and connect to the LOCAL-FORTIGATE saved session (connect over SSH). B. Log in as admin. C. Type the following command: diagnose test authserver ldapWhere: is ADserver (case-sensitive) is aduser1 is Training! You should see something like this for a successful authentication: FortiGate I Student Guide 78 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 2. Close PuTTY. Authenticating and Monitoring You will authenticate through the pre-configured SSL VPN as aduser1. This user is a member of the Remote_users group on FortiGate. You will then monitor the authentication. To authenticate as a remote user 1. In the Local-Windows VM, open a new browser tab and go to https://10.0.1.254:10443. This is the Web mode access for SSL VPN. If you receive an error that indicates your connection is not secure, click Advanced and then select Add Exception. 2. Log in as aduser1 with password Training! The SSL VPN Web portal appears 3. Click Quick Connection and in the URL field, type www.google.com and click Launch. The site launches successfully. FortiGate I Student Guide 79 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 4. Return to your browser tab with the SSL-VPN portal and click Quick Connection again. This time in the URL field type www.gunsgunsguns.com and click Launch. This URL is set to be blocked by the Web Filter security profile you enabled in the SSL VPN firewall policy. 5. Remain logged into the SSL VPN portal and continue to the next procedure. To monitor user authentications 1. Return to the browser tab where you are logged into Local-FortiGate as admin. 2. Monitor aduser1. You can view this particular login authentication from the following: FortiView > VPN (filter on last 5 minutes and double-click the entry to view more details) Monitor > SSL-VPN Monitor 3. View the activity of aduser1. You can check the following: FortiView > All Sessions Log & Report > Forward Traffic (Try filtering by user and any additional filters to get more specific results.) Log & Report > Web Filter (Try filtering by user and any additional filters to get more specific results.) 4. Return to your browser tab where you are logged into the SSL VPN portal and log out. You will notice back in the Local-FortiGate GUI (where you are logged in as admin) that Monitor > SSL-VPN Monitor no longer shows the authentication, as the connection is not active. However, FortiView > VPN retains the login information. 5. Close all your browser tabs except for the tab with the Local-FortiGate GUI. FortiGate I Student Guide 80 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 2 Captive Portal In this exercise, you will configure captive portal and restrict access to a specific user group. Captive portal is a convenient way to authenticate Web users on wired or WiFi networks through an HTML form that requests a user name and password (active authentication). This exercise involves creating a user group (and adding a user to it); enabling captive portal and restricting access based on that group; and enabling the disclaimer message. Finally, you will authenticate through captive portal and monitor the authentication. Creating a User Group for Captive Portal Since the goal is to enable captive portal based on a specific group, you must first create a user group and then add a user to the group. For the purposes of this exercise, you will add the user student to the group. Student is a local user on FortiGate that was pre-configured for you. To create a user group for captive portal 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to User & Device > User Groups and click Create New. 3. Complete the following: Field Value Name CP-group Type Firewall Members student 4. Click OK. Enabling Captive Portal In this procedure, you will enable captive portal on a wired network. To enable captive portal 1. In the Local-FortiGate GUI, go to Network > Interfaces and edit port3. This port is your incoming traffic. For more information, see the Network Topology. 2. Complete the following under the Admission Control section: Field Value Security Mode Captive Portal Authentication Portal Local User Access Restricted to Groups User Groups CP-group FortiGate I Student Guide 81 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication 3. Click OK. Enabling the Disclaimer Message In order to provide those logging in through captive portal with a disclaimer message, you must enable disclaimers. Since we are enabling captive portal through a wired interface, disclaimers can only be enabled through the CLI. Note: If captive portal is enabled through WiFi, you can enable disclaimers through the GUI (WiFi & Switch Controller > SSID). We are using a wired interface in this lab. To enable the disclaimer message 1. Open PuTTY on the Local-Windows VM and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Log in as admin. 3. Type the following command: config firewall policy edit 1 set disclaimer enable end 4. Close PuTTY. Authenticating and Monitoring Now that captive portal is configured and the disclaimer enabled, you can test it by authenticating through captive portal as the student user. You will then monitor the authentication as the admin user. To authenticate through captive portal 1. In the Local-Windows VM, open a new browser tab and go to any website, such as www.bbc.com. 2. When prompted, log in with username student and password fortinet. FortiGate I Student Guide 82 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication The Terms and Disclaimer Agreement dialog appears. 3. Click Yes, I agree. Once you agree to the terms, you are redirected to the website you originally requested. 4. Open additional browser tabs and access a few more websites through captive portal, for example: www.youtube.com www.cnn.com 5. Leave all browser tabs open and continue to the next procedure. FortiGate I Student Guide 83 DO NOT REPRINT © FORTINET LAB 5–Firewall Authentication To monitor active captive portal authentications 1. In the Local-Windows VM, return to the browser tab where you are logged into the Local-FortiGate GUI as admin. 2. Monitor the student user. You can view this particular login authentication from Monitor > Firewall User Monitor. Note: While the CLI config user setting dictates how long a user authenticating through captive portal can remain authenticated, you can choose to manually deauthenticate a captive portal user by selecting the user in the Firewall User Monitor list and clicking De-authenticate. Once de-authenticated, the user disappears from the list, as it is reserved for active users only. 3. Select student and click De-authenticate to manually end the user's session. 4. Click OK. 5. Close the browser. FortiGate I Student Guide 84 DO NOT REPRINT © FORTINET LAB 6–SSL VPN LAB 6–SSL VPN In this lab, you will manage user groups and portals for an SSL VPN. Objectives Configure and connect to an SSL VPN Enable authentication security Configure a firewall policies for SSL VPN users access to private network resources Time to Complete Estimated: 25 minutes Prerequisites Before beginning this lab, you must restore configuration file to the Local-FortiGate. To restore the Local-FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Click Upload, browse to Desktop > Resources > FortiGate-I > Introduction and select local-ssl-vpn.conf. 4. Click OK. 5. Click OK. FortiGate I Student Guide 85 DO NOT REPRINT © FORTINET LAB 6–SSL VPN 1 Web-Only SSL VPN FortiGate SSL VPN supports three operation modes: web-only, port forward and tunnel. During this lab exercise you will test the web-only mode. The VPN in this lab will allow VPN users connecting from the Remote-Windows VM to access the local subnet (10.0.1.0/24). Configuring the SSL VPN Settings This procedure configures the SSL VPN settings. To configure the SSL VPN settings 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to VPN > SSL-VPN Settings. 3. Under the Connection Settings, configure the following values: Field Value Listen on Interface(s) port1 Listen on Port 10443 Restrict Access Allow access from any host Inactive For 3000 seconds Server Certificate Fortinet_Factory 4. Under the Tunnel Mode Client Settings, select Automatic assign addresses. 5. Under the Authentication/Portal Mapping, select All Other Users/Groups and click Edit: 6. Select the portal web-access from the drop-down list and click OK. 7. Click Apply to save all the changes. 8. Click OK to confirm the use of the built-in certificate. Creating a Firewall Policy for SSL VPN This procedure will create a firewall policy to allow traffic from SSL VPN users to the local subnet (10.0.1.0/24). FortiGate I Student Guide 86 DO NOT REPRINT © FORTINET LAB 6–SSL VPN To create a firewall policy for SSL VPN 1. In the Local-FortiGate, go to Policy & Objects > IPv4 Policy. 2. Click Create New and add the following firewall policy: Field Value Name SSL VPN Access Incoming Interface SSL-VPN tunnel interface Outgoing Interface port3 Source SSLVPN_TUNNEL_ADDR1 SSL_VPN_USERS Destination Address LOCAL_SUBNET Schedule always Service ALL Action ACCEPT 3. Disable NAT and click OK. 4. Click OK to confirm the use of the built-in certificate. Testing the SSL VPN Now you will test the SSL VPN by connecting from the Remote-Windows VM. To test the SSL VPN 1. Connect to the Remote-Windows VM. 2. Open Firefox and connect to: https://10.200.1.1:10443/ 3. To accept the security warning, click Advanced and select Add Exception. 4. Click Confirm Security Exception. FortiGate I Student Guide 87 DO NOT REPRINT © FORTINET LAB 6–SSL VPN Stop and Think Why did you get this security warning? For SSL connections, the FortiGate is using a built-in certificate, which is signed by a certificate authority that the browser does not trust. In the Certificate Operations lesson of the FortiGate II course, you can learn more about why this happens and how to fix it. 5. Log in as student with the password fortinet. Notice that the web portal is using its default settings. 6. Log out: Adding a Bookmark to the Portal Using this procedure, you will add a bookmark to the portal. To add a bookmark to the portal 1. Go back to the Local-Windows VM and connect to the Local-FortiGate GUI. 2. Go to VPN >SSL-VPN Portals. 3. Click the web-access row, and then click Edit. FortiGate I Student Guide 88 DO NOT REPRINT © FORTINET LAB 6–SSL VPN 4. In the Predefined Bookmarks section, click Create New. Configure these settings: Field Value Name Local-Windows VM Type HTTP/HTTPS URL http://10.0.1.10 Single Sign-On Disabled 5. Click OK to close the bookmark. 6. Click OK again to save the portal's settings. Testing the Bookmark You will connect to the SSL VPN tunnel again from the Remote-Windows VM and confirm that you can access 10.0.1.10 from the bookmark. To test the bookmark 1. From the Remote-Windows VM, open Firefox and connect to the SSL VPN portal again: https://10.200.1.1:10443 2. Log in using the account student with the password fortinet. 3. Click on the Local-Windows VM bookmark. 4. You will connect to the web server running in the Local-Windows VM (10.0.1.10). FortiGate I Student Guide 89 DO NOT REPRINT © FORTINET LAB 6–SSL VPN Examining the Web-Only (Reverse HTTP Proxy) Mechanism Observe the URL in the address bar. What does it mean? To examine the reverse HTTP proxy mechanism 1. In the browser's address bar, notice the URL. https://10.200.1.1:10443/proxy/..../http/10.0.1.10/ If you were on the local network while accessing the website, the address would be http://10.0.1.10. But, since you are accessing it remotely, through FortiGate's HTTP proxy, the URL is different. Part of the URL https://10.200.1.1:10443 /proxy/..../http/ 10.0.1.10/ FortiGate I Student Guide Description Indicates that the connection is SSL/TLSencrypted, and that the portal is on FortiGate's port1 SSL VPN gateway. Indicates that the connection is being handled by FortiGate's HTTP reverse proxy. Indicates the destination IP address of the website inside your private network, which you are accessing through the VPN. 90 DO NOT REPRINT © FORTINET LAB 6–SSL VPN Note: The FortiGate encrypts the connection to the browser. But the destination server's IP address in the URL is displayed in clear text, not hidden from users. The secondary connection, from FortiGate's HTTP proxy to the bookmarked website, is not encrypted. Disconnecting an SSL VPN User This procedure shows how to disconnect an SSL VPN user from the FortiGate GUI. To disconnect an SSL VPN user 1. From the Local-Windows VM, connect back to the Local-FortiGate GUI. 2. Go to Monitor > SSL-VPN Monitor. 3. Right click on the user student and select End Session. FortiGate I Student Guide 91 DO NOT REPRINT © FORTINET LAB 6–SSL VPN 2 SSL VPN Tunnel Mode In this exercise, your will change the SSL VPN configuration to support tunnel mode. Adding Tunnel Mode The SSL VPN portal associated with each user group determines who has tunnel mode access. You will change the SSL VPN configuration to use the portal full-access, which supports tunnel mode. To add tunnel mode 1. In the Local-FortiGate GUI, go to VPN > SSL-VPN Settings. 2. Under the Authentication/Portal Mapping, select All Other Users/Groups and click Edit: 3. Select full-access and click OK. 4. Click Apply. 5. Click OK to confirm the use of the built-in certificate. Configuring the Routing for Tunnel Mode In tunnel mode, the FortiClient installs one or more routes in the SSL VPN client once the tunnel is connected. In this way, traffic destined to the internal subnets is properly routed through the tunnel. To configure the routing for tunnel mode 1. In the Local-FortiGate GUI, go to VPN > SSL-VPN Portal. 2. Select the full-access portal and click Edit. 3. Set the Routing Address to LOCAL_SUBNET: 4. Click OK. FortiGate I Student Guide 92 DO NOT REPRINT © FORTINET LAB 6–SSL VPN Configuring FortiClient for SSL VPN Connecting SSL VPN tunnel mode requires FortiClient. You will use the FortiClient installed in the Remote-Windows VM to test your configuration. To configure FortiClient for SSL VPN 1. From the Remote-Windows VM, start FortiClient. 2. Click Configure VPN. 3. Select the SSL-VPLN tab and configure the following settings: Field Value Connection Name Local-FortiGate Remote Gateway 10.200.1.1 Customize port Enabled and 10443 4. Click Apply. 5. Click Close. Testing the Tunnel Mode You will connect using the student account to test the tunnel mode. To test the tunnel mode 1. In the Remote-Windows VM. Open FortiClient and enter the username student with the password fortinet. FortiGate I Student Guide 93 DO NOT REPRINT © FORTINET LAB 6–SSL VPN 2. Click Connect. 3. Click Yes to accept the certificate. 4. Wait a few seconds and open FortiClient again. You should observe that the tunnel is connected. 5. Open Firefox and access the URL: http://10.0.1.10 Observe that you are now using the web server URL as if you were connected locally. You are not using the reverse HTTP proxy as in the case of web-only mode. Your IP traffic is directly encapsulated over HTTPS and sent through the tunnel. 6. Go back to FortiClient and click Disconnect. FortiGate I Student Guide 94 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN LAB 7–Basic IPsec VPN In this lab, you will configure a point-to-point IPsec VPN between two FortiGate devices. Objectives Identify the phases of Internet Key Exchange (IKEv1). Compare route-based to policy-based VPNs. Deploy a site-to-site VPN between two FortiGates. Monitor VPN tunnels. Time to Complete Estimated: 30 minutes Prerequisites Before beginning this lab, you must restore configuration files to the Local-FortiGate and RemoteFortiGate. To restore the Remote-FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Remote-FortiGate GUI at 10.200.3.1. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. FortiGate I Student Guide 95 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN 4. Browse to Desktop > Resources > FortiGate-I > Introduction and select remoteinitial.conf. 5. Click OK. 6. Click OK to reboot. To restore the Local-FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. 4. Browse to Desktop > Resources > FortiGate-I > Introduction and select localinitial.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 96 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN 1 Route-based IPsec VPN During this lab you will configure an IPsec tunnel between the Local-FortiGate and the RemoteFortiGate for communication between the Local-Windows VM and Remote-Windows. Creating a VPN Using the VPN Wizard You will configure the Local-FortiGate side using the VPN wizard, which creates the IPsec in routebased mode. To create a VPN using the VPN wizard 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to VPN > IPsec Tunnels. 3. Click Create New. 4. Configure the following settings: Field Value Name ToRemote Template Type Site to Site Remote Device Type FortiGate NAT Configuration No NAT between sites 5. Click Next . 6. Configure the following settings: Field Value Remote Device IP Address IP Address 10.200.3.1 Outgoing interface port1 Authentication Method Pre-shared Key Pre-shared Key fortinet 7. Click Next. 8. Configure the following settings: Field Value Local Interface port3 Local Subnets 10.0.1.0/24 Remote Subnets 10.0.2.0/24 9. Click Create. You should see the following screen: FortiGate I Student Guide 97 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN 10. Click Show Tunnel List. You will see the VPN you have just created: Reviewing the Objects Created By the VPN Wizard You will review what was created by the VPN wizard. To review the objects created by the VPN wizard 1. In the Local-FortiGate GUI, go to VPN > IPsec Tunnels. 2. Select the VPN and click Edit. Observer the quick mode selectors that the wizard configured for you: FortiGate I Student Guide 98 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN You will need this information to configure the other FortiGate. The quick mode selectors in both sides must mirror each other. In other words, the Local Address in one side must match the Remote Address in the other side. 3. Go to Network > Interfaces. 4. Click on the plus sign added to port1. You will see a new virtual interface named ToRemote (matching the phase 1 name). Stop and Think What does this virtual interface tell us about the VPN created by the wizard? Is it policybased or route-based? Discussion The wizard created the VPN using a route-based configuration. The FortiGate automatically adds an IPsec virtual interface for each VPN configured as route-based. This does not happen in a policy-based configuration. A route-based VPN requires firewall policies and at least one route to the remote network. As you will see, the wizard has created all these additional objects for you. 5. Go to Policy & Objects > Addresses and observe two new Firewall address objects: ToRemote_local_subnet_1, and ToRemote_remote_subnet_1. 6. Go to Policy & Objects > IPv4 Policy and observe the new two firewall policies: one from FortiGate I Student Guide 99 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN port3 to ToRemote and another one from ToRemote to port3. You will see that the Action is both cases is ACCEPT. 7. Go to Network > Static Routes and look at the static route added by the wizard. You have completed the VPN configuration on the Local-FortiGate side. In the next exercise you will do the configuration on the Remote-FortiGate side. FortiGate I Student Guide 100 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN 2 Policy-based IPsec VPN For learning purposes, you will do the configuration in both FortiGates differently. During this exercise you will create the VPN on the Remote-FortiGate side without using the wizard and using a policybased configuration. Un-hiding the Policy-based VPN Settings Policy-based configuration is hidden from the GUI by default. You will un-hide it. To un-hide the policy-based VPN settings 1. From the Local-Windows VM, open a browser and log in as admin to the Remote-FortiGate GUI at 10.200.3.1. 2. Go to System > Feature Select. 3. Enable Policy-based IPsec VPN. 4. Click Apply. Creating a Policy-based VPN You will create the phases 1 and 2. To create a policy-based VPN 1. In the Remote-FortiGate GUI, go to VPN > IPsec Tunnels. 2. Click Create New. 3. Type the name ToLocal and select Custom as the template name. 4. Click Next. 5. Disable the setting Enable IPsec Interface Mode: 6. Configure the following settings: Field Value Remote Gateway Static IP Address IP Address 10.200.1.1 Interface port4 Mode Config Disabled NAT Transversal Disabled FortiGate I Student Guide 101 DO NOT REPRINT © FORTINET Dead Peer Detection On Idle Method Pre-shared Key Pre-shared Key fortinet LAB 7–Basic IPsec VPN 7. Leave the other parameters with its default values and scroll down the windows to display the phase 2 settings. Click the pencil icon to edit the Phase 2 Selectors: 8. Enter 10.0.2.0/24 as the Local Address and 10.0.1.0/24 as the Remote Address: 9. Click OK. Note: Now the quick mode selectors in both sides mirror each other. If that is not the case, the tunnel will not come up. Creating a Firewall Policy for Policy-based VPN The last step is to create a firewall policy to allow traffic. In a policy-based configuration only one policy is required to allow traffic initiated at either side. The policy is applied bi-directionally. To create a firewall policy for policy-based VPN 1. In the Remote-FortiGate GUI, go to Policy & Objects > IPv4 Policy. FortiGate I Student Guide 102 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN 2. Click Create New. 3. Configure the following settings: Field Value Name VPN traffic to Local Incoming Interface port6 Outgoing Interface port4 Source REMOTE_SUBNET Destination Address LOCAL_SUBNET Schedule always Service ALL Action IPsec VPN Tunnel ToLocal Allow traffic to be initiated from the remote site Enabled 4. Click OK. Note: This is probably the first time you see the action IPsec for a firewall policy. In previous exercises the available actions were Accept and Deny only. The action IPsec is displayed in the GUI only when the policy-based VPN settings are not hidden. Moving a Firewall Policy The new policy was created below the firewall policy for Internet traffic. You will need to move it up for the VPN traffic to match it. To move a firewall policy 1. In the Remote-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Expand the list of firewall policies from port6 to port4: 3. Drag and drop the policy for VPN traffic to Local to the top: FortiGate I Student Guide 103 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN Stop and Think In the previous exercise, the VPN wizard added a static route for the VPN traffic. Why don't you need to add a static route in this case? Discussion The VPN wizard creates the IPsec using route-based configuration, which always requires additional routes (usually static routes) to route the traffic through the IPsec virtual interface. This is usually not required in policy-based configuration. What policy-based configuration requires is the VPN traffic matching a firewall policy with the action IPsec. As traffic from 10.0.2.0/24 to 10.0.1.0/24 matches the existing default route, and so the IPsec firewall policy from port6 to port4, no additional routes are needed. FortiGate I Student Guide 104 DO NOT REPRINT © FORTINET LAB 7–Basic IPsec VPN 3 Testing and Monitoring the VPN You have finished the configuration in both FortiGates. The next step is to test the VPN. Testing the VPN You will test the VPN. To test the VPN 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Monitor > IPsec Monitor. Observe that the VPN is currently down. 3. Right click the VPN and select Bring Up: The Status of the VPN will show the green up arrow, indicating that the tunnel is up. Stop and Think Do I always have to manually bring the tunnel after creating? Discussion No. With the current configuration, the tunnel will stay down until either you manually bring it up or there is traffic that should be routed through the tunnel. As you are not generating traffic between 10.0.1.0/24 and 10.0.2.0/24 yet, the tunnel was still down. If you had generated the required traffic while the tunnel was down, it would have gone up automatically. 4. Open a command prompt window in the Local-Windows VM and execute the following command to ping Remote-Windows: ping 10.0.2.10 The ping should work. 5. Go back to the Local-FortiGate GUI and go to Monitor > IPsec Monitor. 6. Click Refresh to refresh the screen. You will observer that counters for Incoming Data and Outgoing Data have increased. This indicates that the traffic between 10.0.1.10 is 10.0.2.10 is successfully being encrypted and routed through the tunnel: Congratulations. You have successfully configured an IPsec VPN between two FortiGate devices. FortiGate I Student Guide 105 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy LAB 8–Explicit Web Proxy In this lab, you will learn how to configure FortiGate to be an explicit web proxy. Objectives Configure FortiGate to act as an explicit web proxy. Use a PAC file to configure explicit proxy settings in web browsers. Authenticate and monitor explicit web proxy users. Time to Complete Estimated: 30 minutes Prerequisites Before beginning this lab, you must restore a configuration file to the Local-FortiGate. To restore the FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. 4. Browse to Desktop > Resources > FortiGate-I > Explicit-Proxy and select localexplicit-proxy.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 106 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy 1 Configuring the Explicit Web Proxy During this exercise you will configure the FortiGate to be an explicit web proxy. You will also configure the FortiGate to authenticate explicit web proxy users and allow Internet access to only one user. After that, you will manually configure Firefox with the proxy IP address and port. Un-hiding the Explicit Web Proxy Setting Explicit web proxy settings are hidden from the GUI by default. You will un-hide them. To un-hide the explicit web proxy setting 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to System > Feature Select. 3. Under Security Features, enable Explicit Proxy. 4. Click Apply. Enabling Explicit Web Proxy You will enable explicit web proxy on the network setting. To enable explicit web proxy 1. In the Local-FortiGate GUI, go to Network > Explicit Proxy. 2. Enable Explicit Web Proxy. 3. For HTTPS port, select Use HTTP Port. 4. Click Apply. Enabling Explicit Web Proxy on an Interface You will specify which internal interface the explicit web proxy will listen on. To enable explicit web proxy on an interface 1. In the Local-FortiGate GUI, go to Network > Interfaces 2. Edit the interface port3. 3. Enable the option Enable Explicit Web Proxy 4. Click OK. FortiGate I Student Guide 107 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy Creating an Explicit Proxy Policy You will create the policy to allow explicit proxy traffic to the Internet. Only the user student will be allowed to browse the Internet through the proxy. To create an explicit proxy policy 1. In the Local-FortiGate GUI, go to Policy & Objects > Explicit Proxy Policy. 2. Click Create New. 3. Configure these settings: Field Value Explicit Proxy Type Web Enabled On port3 Outgoing Interface port1 Source Address LOCAL_SUBNET Destination Address all Action AUTHENTICATE 4. Click Create New to add an authentication rule: 5. Configure the following settings: Field Value Users/Groups student Schedule always 6. Click OK. 7. Click OK. Configuring Firefox for Explicit Web Proxy You have configured the Local-FortiGate as an explicit web proxy. Now you will configure Firefox to use it. FortiGate I Student Guide 108 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy To configure Firefox for explicit web proxy 1. On the Local-Windows VM, open Firefox. 2. Click the Open Menu icon on the top right corner: 3. Select Options: 4. Go to the Advanced > Network tab. 5. Click Settings: FortiGate I Student Guide 109 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy 6. Select Manual proxy configuration and enter: Field Value HTTP Proxy 10.0.1.254 Port 8080 7. Enable the option Use this proxy server for all protocols. 8. Add the subnet 10.0.1.0/24 (separated by a comma) to the No Proxy for list. This list contains the names, IP addresses and subnets of web sites that will be exempted from using the proxy: 9. Click OK. 10. Close Firefox and open it again. FortiGate I Student Guide 110 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy Testing the Explicit Web Proxy Configuration You will test the explicit web proxy configuration. To test the explicit web proxy configuration 1. From Local-Windows VM, open Firefox and browse to any HTTP web site, such as: http://www.pearsonvue.com/fortinet/ http://cve.mitre.org http://www.eicar.org 2. FortiGate will ask for authentication. Use these credentials: Field Value User Name student Password fortinet After that, you should have Internet access through the explicit web proxy. Listing the Active Explicit Web Proxy Users You will execute a CLI command to display the list of active explicit web proxy users. To list the active explicit web proxy users 1. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Type the following CLI command to check the list of active web proxy users: # diagnose wad user list 3. You can also check this list from the GUI, by going to Monitor > Firewall User Monitor. Listing the Active Explicit Web Proxy Sessions For each explicit web proxy connection to a web site, two TCP connections are usually created: one from the client to the proxy, and another one from the proxy to the server. You will run some debug commands to list the sessions established between the client and the proxy; then the sessions established between the proxy and the servers. To list the active explicit web proxy sessions between the client and the proxy 1. In the Local-Windows VM, open a few tabs in Firefox and generate some HTTP traffic, such as: http://www.pearsonvue.com/fortinet/ http://cve.mitre.org FortiGate I Student Guide 111 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy http://www.eicar.org 2. From the Local-FortiGate CLI, type these CLI commands while browsing some HTTP sites: diagnose sys session filter clear diagnose sys session filter dport 8080 diagnose sys session list You can also use the grep command to display only the source and destination IP addresses and ports for each session: diagnose sys session list | grep hook=pre Why is the source IP address of all those sessions 10.0.1.10? Why is the destination IP address of all those sessions 10.0.1.254? Why don’t we see any public IP address listed in those sessions? To list the active explicit web proxy sessions between the proxy and the servers 1. In the Local-Windows VM, open a few tabs in Firefox and generate some HTTP traffic, such as: http://www.pearsonvue.com/fortinet/ http://cve.mitre.org http://www.eicar.org 2. From the Local-FortiGate CLI, type these CLI commands while browsing some HTTP sites: diagnose sys session filter clear diagnose sys session filter dport 80 diagnose sys session list | grep hook=out Why is the source IP address of all these sessions 10.200.1.1? Why don’t we see the IP address of Windows server (10.0.1.10)? FortiGate I Student Guide 112 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy 2 Using a PAC File During this exercise, you will configure a proxy auto-config (PAC) file. You will also configure the browser to get the PAC file from the FortiGate and use it. Configuring FortiGate to Provide the PAC File You will configure FortiGate to host a PAC file and make it available for browsers to download it. To configure FortiGate to provide the PAC file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Network > Explicit Proxy. 3. Enable the option Proxy auto-config (PAC). 4. Click the pencil icon to edit the PAC file: 5. Click Browse. 6. Select the file proxy.pac in the folder Resources\FortiGate-I\Explicit-Proxy. 7. Click Import 8. Click Apply. 9. Click Apply. Checking the PAC File You will open the PAC file from the Local-FortiGate GUI to review it. To check the PAC file 1. In the FortiGate GUI, go to Network > Explicit Proxy. FortiGate I Student Guide 113 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy 2. Click the pencil icon to look at the imported PAC file: Note: The second line in the PAC file specifies that the browser will not use a proxy to reach the servers in the subnet 10.0.0.0/8. The next line configures the browser to use the FortiGate proxy for any other subnet or URL. 3. Click Cancel to close the PAC file. Configuring Firefox to Download the PAC File You will configure Firefox with the URL where the PAC file is hosted. Firefox will connect to the specified URL to download and installed the PAC file. To configure Firefox to download the PAC file 1. From the Local-Windows VM open Firefox. 2. Click the Open Menu icon on the top right corner: 3. Select Options. 4. Select the Advanced > Network tab 5. Click Settings. 6. Select the option Automatic proxy configuration URL then type: http://10.0.1.254:8080/proxy.pac FortiGate I Student Guide 114 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy 7. Click OK. 8. Close Firefox and open it again. Testing the PAC file You will generate some HTTP traffic from the Local-Windows VM to test the PAC file configuration. To test the PAC file 1. In the Local-Windows VM, open a few tabs in Firefox and generate some HTTP traffic, such as: http://www.pearsonvue.com/fortinet/ http://cve.mitre.org http://www.eicar.org If FortiGate asks you to authenticate, use the student account used previously (password fortinet). The traffic will go through the FortiGate proxy. 2. You will connect to a web site in the subnet 10.0.0.0/8. The browser will not use the proxy and will send the HTTP request directly to the server. Try to connect this server: http://10.200.1.254 It's not working. There's something missing in the FortiGate configuration. Do you know what it is? FortiGate I Student Guide 115 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy Allowing Traffic that Does Not Require Proxy The PAC file instructs the browser to not use the proxy for reaching the servers in the subnet 10.0.0.0/8. So, this is traffic that requires a regular firewall policy to be allowed and there is none. You will create the missing firewall policy. Before that, you will create an address object for the subnet 10.0.0.0/8. You will use this object as the destination address for the firewall policy. To create an address object 1. From the Local-FortiGate GUI, go to Policy & Objects > Addresses. 2. Click Create New and select Address. 3. Configure the following settings: Field Value Category Address Name 10_SUBNET Type IP/Netmask Subnet / IP Range 10.0.0.0/8 Interface any 4. Click OK. To allow traffic that does not require proxy 1. From the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Click Create New. 3. Configure the following settings: Field Value Name 10 Subnet Incoming Interface port3 Outgoing Interface port1 Source LOCAL_SUBNET Destination Address 10_SUBNET Schedule always Service ALL Action ACCEPT NAT Enabled 4. Click OK. Testing the Traffic that Does not Require Proxy You will test the firewall policy that allows traffic from Local-Windows VM that does not require proxy. FortiGate I Student Guide 116 DO NOT REPRINT © FORTINET LAB 8–Explicit Web Proxy To test the traffic that does not require proxy 1. From Local-Windows VM, open a Firefox window. 2. Access http://10.200.1.254 one more time. It will work now. Disabling the Explicit Web Proxy in Firefox To finish the lab exercise, you will disable the proxy in Firefox. To disable the explicit web proxy in Firefox 1. From Local-Windows VM, open Firefox. 2. Click the Open Menu icon on the top right corner: 3. Click Options. 4. Select Advanced > Network. 5. Click Settings. 6. Select No proxy. 7. Click OK. 8. Close Firefox and open it again. FortiGate I Student Guide 117 DO NOT REPRINT © FORTINET LAB 9–Antivirus LAB 9–Antivirus In this lab, you will configure, use, and monitor both proxy-based and flow-based antivirus scanning on Local-FortiGate. Objectives Configure proxy-based and flow-based antivirus scanning. Understand FortiGate antivirus scanning behavior. Scan multiple protocols. Read and understand antivirus logs. Time to Complete Estimated: 20 minutes Prerequisites Before beginning this lab, you must restore a configuration file to the FortiGate. To restore the FortiGate configuration file 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. FortiGate I Student Guide 118 DO NOT REPRINT © FORTINET LAB 9–Antivirus 4. Browse to Desktop > Resources > FortiGate-I > Antivirus and select localantivirus.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 119 DO NOT REPRINT © FORTINET LAB 9–Antivirus 1 Proxy-based Antivirus Scanning In proxy-based scan, each protocol's proxy buffers the entire file (or waits for oversize limit) and scan it. The client must wait for the scan to finish. In this exercise, you will configure proxy-based antivirus scanning, including associated security features (such as proxy options and deep-inspection) and apply it to the firewall policy. You will observe the behavior antivirus scanning when deep-inspection is disabled or enabled. Finally, you will view the logs and summary information for the antivirus activity. Configuring Proxy-based Antivirus settings The configuration file you uploaded at the beginning of this lab already has proxy-based antivirus settings pre-configured for you. In this procedure, you will verify the settings, and enable the proxybased antivirus profile on your firewall policy. To review Proxy-based Antivirus Profile 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard > System Information widget. You will notice that Inspection Mode is set to Proxy-based. 3. Go to Security Profiles > AntiVirus and select the default antivirus profile. 4. Verify that the Detect Viruses is set to Block and HTTP scanning is enabled under Inspected Protocols. This profile defines the behavior for virus scanning on the traffic that matches policies using that profile. Enabling the Antivirus Profile on a Firewall Policy Now that your antivirus profile is configured, you must enable antivirus profile on your firewall policy. When antivirus profile is enabled on a firewall policy, it can scan for viruses and can generate logs (based on configured log settings). To enable Antivirus Profile on a Firewall Policy 1. In the Local-FortiGate GUI, go to Policy& Objects > IPv4 Policy. 2. Right-click on the Seq.# column for AV_Scan firewall policy. 3. Click Edit. 4. Under Security Profiles, enable AntiVirus and select default from the associated drop-down list. FortiGate I Student Guide 120 DO NOT REPRINT © FORTINET LAB 9–Antivirus Note: When selecting an antivirus profile, Proxy Options is automatically enabled. You cannot disable Proxy Options, but can select any pre-configured proxy options profile from the associated drop-down list. 5. Leave all other settings at their defaults and click OK to save the changes. 6. Optionally, if you would like to see the default proxy options profile selected in the firewall policy, go to Security Profiles > Proxy Options. This profile determines how FortiGate’s proxies pick up protocols. For example, The HTTP listening port is set to port 80. Testing the Antivirus Configuration In this procedure, you will download the EICAR file to your Local-Windows VM. The EICAR test file is an industry-standard virus used to test antivirus detection with an undamaging test file. The file contains the following characters: X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H* To test the antivirus configuration 1. In the Local-Windows VM, launch a web browser and access the following web site: http://eicar.org 2. On the EICAR web page, click DOWNLOAD ANTI MALWARE TESTFILE (located in the top right-hand corner of the page) and then click the Download link that appears on the left. 3. Download the any of the EICAR sample files from the section Download area using the standard protocol http. FortiGate should block the download attempt, and insert a replacement message similar to the following: FortiGate shows the HTTP virus message when it blocks or quarantines infected files. 4. In the message that is displayed, click the link to view information about the detected virus on the Fortinet Virus Encyclopedia. Viewing the Antivirus Logs The purpose of logs is to help you monitor your network traffic, locate problems, establish FortiGate I Student Guide 121 DO NOT REPRINT © FORTINET LAB 9–Antivirus baselines, and make adjustments to network security, if necessary. To view the antivirus logs 1. In the Local-FortiGate GUI, go to Log & Report > Forward Traffic. 2. Locate the antivirus log message and double click on it. The Details tab shows forward traffic log information along with the action taken. 3. Click Security tab to view security log information which provides information more specific to security event such as file name, Virus/Botnet and reference to name a few. 4. You can also view antivirus security logs under Log & Report > AntiVirus. Note: The AntiVirus logs section will not display if there are no AV logs. FortiGate will show it after creating logs. If this menu item does not display, log out from the FortiGate GUI and log in again to refresh it. 5. Go to the Dashboard. 6. Add the Advanced Threat Protection Statistics widget to view the summary statistics of the antivirus activity. The Advanced Threat Protection Statistics widget provides statistics about the number of files submitted and the results of those scans. Enabling SSL Inspection on a Firewall Policy So far you have tested the un-encrypted traffic for antivirus scanning. In order for the FortiGate to inspect the encrypted traffic, deep inspection must be enabled on the firewall policy. By enabling this feature, FortiGate will filter on traffic that is using the SSL encrypted protocol and is very similar to man-in-the-middle (MITM) attack. To test antivirus scanning without SSL Inspection enabled on firewall policy 1. In the Local-Windows VM, launch a web browser and access the following web site: http://eicar.org 2. On the EICAR web page, click DOWNLOAD ANTI MALWARE TESTFILE and then click the Download link that appears on the left. 3. This time, download the EICAR sample file from the Download area using the secure, SSL enabled protocol https section. Your download should succeed. FortiGate should not block the file, because we have not enabled full SSL inspection. To review SSL inspection profile 1. In the Local-FortiGate GUI, go to Security Profiles > SSL/SSH Inspection. 2. Select the deep-inspection profile from the dropdown on the right-hand side. FortiGate I Student Guide 122 DO NOT REPRINT © FORTINET LAB 9–Antivirus 3. Review and verify the following: Inspection Method is set to Full SSL Inspection. Protocol Port Mappings have HTTPS enabled and set to port 443. To enable SSL inspection profile on a firewall policy and test it 1. In the Local-FortiGate GUI, go to Policy& Objects > IPv4 Policy. 2. Right-click on Seq.# column for AV_Scan firewall policy. 3. Click Edit. 4. Under Security Profiles, enable SSL/SSH Inspection and select deep-inspection from the associated drop-down list. 5. Leave all other settings at their defaults and click OK to save the changes. 6. Return to the EICAR web page and attempt to download the eicar.com file from the Download area using the secure, SSL enabled protocol https section. Note: If the FortiGate self-signed full inspection certificate is not installed on the browser, end users will see a certificate warning. In this environment, FortiGate self-signed SSL inspection certificate is installed on the browser. 7. This FortiGate should block the download and replace it with a message. If it doesn't, you may need to clear your cache. In Firefox, go to History > Clear Recent History > Everything. FortiGate I Student Guide 123 DO NOT REPRINT © FORTINET LAB 9–Antivirus 2 Flow-based Antivirus Scanning Flow-based scanning has two modes: Quick scan uses a compact antivirus database and performs faster scanning because it doesn’t cache the file in memory. Full scan uses the full antivirus database. It caches the file locally, but transmits it simultaneously to end client. Everything is transmitted, except last packet. The last packet is delayed and whole file is sent to AV engine for scanning. In this exercise, you will change the FortiGate inspection mode to flow-based, which will convert supported proxy-based profiles to flow-based and will remove any proxy-specific settings. You will test the flow-based scanning using FTP protocol. Switching FortiGate Inspection Mode On the FortiGate, proxy-based inspection mode is enabled by default. You will be switching the inspection mode from proxy-based to flow-based. To switch FortiGate Inspection Mode 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard > System Information widget. 3. Click [Change] in the Inspection Mode column to change from Proxy-based to Flow-based. 4. Select Flow-based, accept the warning message, and click OK to save the changes. FortiGate I Student Guide 124 DO NOT REPRINT © FORTINET LAB 9–Antivirus Note: Switching from one inspection mode to another will result in the conversion of profiles and removal or addition of security features, based on the selected mode. Reviewing the Flow-based Antivirus Profile Now you've changed the inspection mode to flow-based, you will view the antivirus profile to see the changes. To review flow-based antivirus profile 1. In the Local-FortiGate GUI, go to Security Profiles > AntiVirus. 2. Review the default antivirus profile. You will notice the default antivirus profile has switched from proxy-based profile to a full flowbased profile. You will also see that Proxy Options have been removed from under Security Profiles. Testing the Flow-based Antivirus Profile You will be now test the flow-based antivirus profile. To test the antivirus configuration 1. From the Local-Windows VM, locate and open the FileZilla FTP client software. 2. Connect to 10.200.1.254. Leave the username and password blank to use anonymous FTP. 3. On the Remote side, click the pub folder. FortiGate I Student Guide 125 DO NOT REPRINT © FORTINET 4. LAB 9–Antivirus Right-click the eicar.com file and select Download. The client should display an error message that the server aborted the connection. Note: With flow-based virus scanning, data from the file has already been sent to the client, so no immediate block message/page may appear. Viewing the Antivirus Logs Now you will check and confirm the logs for the testing you just performed. To view the antivirus logs 1. In the Local-FortiGate GUI, go to Log & Report > Forward Traffic. 2. Locate the antivirus logs message. Double click the log entry to select it. FortiGate I Student Guide 126 DO NOT REPRINT © FORTINET LAB 9–Antivirus The Details tab shows forward traffic log information along with the action taken. 3. Click the Security tab to view security log information. This includes information more specific to the security event such as file name, Virus/Botnet, and reference, to name a few. 4. You can also view antivirus security logs under Log & Report > AntiVirus. FortiGate I Student Guide 127 DO NOT REPRINT © FORTINET LAB 10–Web Filtering LAB 10–Web Filtering In this lab, you will configure one of the most used security profiles on FortiGate: web filter. This includes configuring a FortiGuard category-based filter, applying the web filter profile on a firewall policy, testing your configuration, and basic troubleshooting. You will also apply overrides to FortiGuard website categories and perform overrides to the web filtering profile. The web filtering overrides allow you to execute different actions, rather than the configured actions on the web filter security profile. Objectives Configure web filtering on a FortiGate device. Apply the FortiGuard category-based option for web filtering. Troubleshoot the web filter. Read and interpret web filter log entries. Configure web rating overrides. Configure web profile overrides. Time to Complete Estimated: 25 minutes Prerequisites Before beginning this lab, you must clear your web browser history/cache and restore a configuration file to the Local-FortiGate. To clear the web browser history 1. From the Local-Windows VM, open the browser and click the menu icon in the upper-right corner. 2. Go to History > Clear Recent History and select Everything as the time range to clear. 3. Click Clear Now. FortiGate I Student Guide 128 DO NOT REPRINT © FORTINET LAB 10–Web Filtering To restore the FortiGate configuration file 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. Select to restore from Local PC and click Upload. 4. Browse to Desktop > Resources > FortiGate-I > Web-Filtering and select local-webfiltering.conf. 5. Click OK. 6. Click OK to reboot. FortiGate I Student Guide 129 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 1 FortiGuard Web Filtering In order to configure FortiGate for web filtering based on FortiGuard categories, you must ensure FortiGate has a valid FortiGuard security subscription license. The license provides the web filtering capabilities necessary to protect against inappropriate websites. You must then configure a category-based web filter security profile on FortiGate and apply the security profile on a firewall policy to inspect the HTTP traffic. Finally you can test different actions taken by the FortiGate according to the website rating. Reviewing the FortiGate settings You will review the inspection mode and the license status according to the uploaded settings. You will also list the FortiGuard distribution servers (FDS) that your FortiGate will use to send the web filtering requests. To review the restored settings on FortiGate 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the License Information widget, confirm that the FortiGuard Web Filtering service is licensed and active. A green check mark should be displayed. 3. Open PuTTY from the Local-Windows VM, and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 4. Log in as admin and type the following command to check the status of the web filtering service: get webfilter status The get webfilter status and diagnose debug rating commands show the list of FortiGuard FDS that your FortiGate uses to send web filtering requests. In normal operations, FortiGate only sends the rating requests to the server on the top of the list. Each server is probed for round trip time (RTT) every two minutes. FortiGate I Student Guide 130 DO NOT REPRINT © FORTINET LAB 10–Web Filtering Stop and Think Why does only one IP address appear from my network in the server list? Discussion Your lab environment uses a FortiManager at 10.0.1.241, which has been configured as a local FDS server. It contains a local copy of the FDS web rating database. FortiGate sends the rating requests to FortiManager instead of the public FDS servers. For this reason, the output of the above command lists only the FortiManager IP address. Configuring a FortiGuard Category-based Web Filter You will observe the web filtering profile by default and configure the FortiGuard category-based filter. To configure the web-filter security profile 1. In the Local-FortiGate GUI, go to Security Profiles > Web Filter. 2. From the upper-right drop-down list, ensure default is selected as your web filter profile: 3. Enable FortiGuard category based filter: 4. Review the preassigned actions for each category. Category Action Local Categories Allow Potentially Liable Block Adult/Mature Content Block: Other Adult Material and Pornography Monitor : All other sub-categories Bandwidth Consuming Block: Streaming Media and Download Warning: All other sub-categories FortiGate I Student Guide 131 DO NOT REPRINT © FORTINET Security Risk Block General Interest - Personal Monitor General Interest - Business Monitor Unrated Allow LAB 10–Web Filtering Expand General Interest - Business to view the sub-categories: 5. Right-click Search Engines and Portals and select Allow: 6. Click Apply. Applying the Web Filter Profile on a Firewall Policy Now that you have configured the web filter profile, you must enable this security profile on a firewall policy in order to start inspecting web traffic. You will also enable the logs to store and analyze the security events generated by the web traffic. To apply a security profile on a firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy and edit policy named Internet_Access. 2. Under the Security Profiles section, enable Web Filter and select default. Note that this action enables the Proxy Options profile. FortiGate I Student Guide 132 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 3. Under Logging Options, enable Log Allowed Traffic and select Security Events to enable the UTM log: 4. Keep all other default settings and click OK. Testing the Web Filter For the purposes of this lab, you will review the website ratings and test the web filter security profile you configured for each category. To review the FortiGuard web filtering categories 1. In the Local-Windows VM, open a browser and go to http://www.fortiguard.com/webfilter. 2. Use the URL/IP Rating & Info tool and search for the following URL: http://www.youtube.com This is one of the websites you will use later to test your web filter. As you can see, YouTube is listed in the Steaming Media and Download category. FortiGate I Student Guide 133 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 3. Use the URL/IP Rating & Info tool again to find the rated category for the following websites: http://www.skype.com/ http://www.ask.com/ http://www.bing.com/ You will test your web filter using these websites as well. This table shows the category assigned to each URL as well as the action FortiGate will take based on your web filter security profile: Website Category Action http://www.youtube.com/ Streaming Media category Block http://www.skype.com/ Internet Telephony Warning http://www.bing.com/ Search Engines and Portals Allow To test the web filter 1. In the Local-Windows VM, open a new browser tab and go to http://www.youtube.com. A block page displays according to the predefined action for this website category. 2. Open a new browser tab and go to http://www.skype.com/. A warning page displays according to the predefined action for this website category. FortiGate I Student Guide 134 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 3. Click Proceed to accept the warning and access the website. 4. Open a new browser tab and go to http://www.bing.com/. This website appears, as it belongs to the Search Engines and Portals category which is set to Allow. Creating a Web Rating Override In the procedure you will override the category for www.bing.com. To create a web rating override 1. In the Local-FortiGate GUI, go to Security Profiles > Web Rating Overrides. 2. Click Create New and configure the following settings: Field Value URL www.bing.com Category Security Risk Sub-Category Malicious Websites 3. Click OK. Testing the Web Rating Override You will test the web rating override you created in the previous procedure. To confirm that the FortiGate is taking the local override, you will enable the real time debug for the web filtering process. Real time debugs show what a process is doing in real time. To troubleshoot the web filter 1. In the Local-Windows VM, open PuTTY and connect to the LOCAL-FORTIGATE saved session (connect over SSH). 2. Log in as admin and type the following commands to enable the web filtering real time debug: diagnose debug application urlfilter -1 FortiGate I Student Guide 135 DO NOT REPRINT © FORTINET LAB 10–Web Filtering diagnose debug enable 3. Open a new browser tab, and try again to access the website www.bing.com. 4. Go back to your PuTTY CLI session and observe the output. It should be similar to the one below: msg="received a request /tmp/.wad_202_0_0.url.socket, addr_len=31: d=www.bing.com:80, id=183, vfname='root', vfid=0, profile='default', type=0, client=10.0.1.10, url_source=1, url="/" Url matches local rating action=10(ftgd-block) wf-act=3(BLOCK) user="N/A" src=10.0.1.10 sport=53863 dst=204.79.197.200 dport=80 service="http" cat=26 cat_desc="Malicious Websites" hostname="www.bing.com" url="/" The diagnostic output indicates the URL matches a local rating instead of a FortiGuard rating. So, http://www.bing.com/ is blocked, because you have overridden its category rating! 5. Type the following commands to stop the real time debug: diagnose debug application urlfilter 0 diagnose debug disable FortiGate I Student Guide 136 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 2 Web Filtering Authentication In this exercise, you will configure and test the authenticate action for web filtering categories. Setting Up the Authenticate Action You will first override the category for www.bing.com to Proxy Avoidance. After that, you will set the action for this FortiGuard category to Authenticate. To override the category 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Security Profiles > Web Rating Overrides. There is an entry for www.bing.com. The override category is set to Malicious Websites, which is a Security Risk subcategory. Security Risk is set to Block by default. 3. Edit the rating override for www.bing.com and change the category and sub-category: Field Value Category Potentially Liable Sub-Category Proxy Avoidance Note: The Potentially Liable category is set to Block, by default in your FortiGate. 4. Click OK. To set up the authenticate action 1. In the Local-FortiGate GUI, go to Security Profiles > Web Filter. 2. Under FortiGuard categories, right-click Potentially Liable and select Authenticate. 3. The Edit Filter widget will appear. Use the following settings: Field Warning Interval Value 5 minutes FortiGate I Student Guide 137 DO NOT REPRINT © FORTINET Selected User Groups LAB 10–Web Filtering Override_Permissions 4. Click OK. 5. Click Apply. Note: For the purpose of this lab, the Override_Permissions is a predefined user group. To review the user groups, go to User & Devices > User Groups. Defining Users and Groups You will define a user in order to test the authenticate action. To create an user 1. Go to User & Devices > User Definition. 2. Click Create New. 3. Select Local User as the User Type. 4. Click Next and configure the following settings: Field Value User Name student Password fortinet 5. Click Next. 6. Click Next. 7. Enable User Group and select Override_Permissions from the drop-down list. 8. Click Create. The student user is created. Testing the Authenticate Action In section, you will test access to a website with the authenticate action and then analyze the logs made by the security events. To test the web rating override 1. Open a new browser tab, and try to access http://www.bing.com. A web page blocked message appears. Note that it is a different message from the one that appeared before: FortiGate I Student Guide 138 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 2. Click Proceed. 3. Enter the following credentials: Field Value Username student Password fortinet This website now displays correctly. To review the web filter logs for web rating overrides 1. Return to the Local-FortiGate GUI and go to Log & Report > Web Filter. Note: The Web Filter logs section will not display if there are no web filtering logs. FortiGate will show it after creating logs. If this menu item does not display, log out from the FortiGate GUI and log in again to refresh it. According the logs, http://www.bing.com was initially blocked, but after clicking Proceed and authenticating, the logs show a different action: passthrough. Remember, http://www.bing.com is rated by FortiGuard as belonging to the Search Engines and Portals category, where the action, by default, is set to Allow. But for this website, you changed the category to Potentially Liable. FortiGate I Student Guide 139 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 3 Web Profile Overrides After you have tested the web rating overrides, you will test web profile overrides. The web profile overrides feature changes the rules applied to inspected traffic. It authorizes some users, user groups, or predefined source IPs, to use a different web filter profile. Configure Web Profile Overrides In this procedure, you will allow users to override blocked categories. Those users must authenticate in order to apply a different web filter profile. To configure a Web Profile Override 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Security Profiles > Web Filter. 3. Enable Allow users to override blocked categories and enter the following options: Field Value Group that can override Override_Permissions Profile can switch to monitor-all Switch applies to IP Switch duration Predefined 0 Day(s) | 0 Hour(s) | 15 Minute(s) 4. Click Apply to save the changes. Testing the Web Profile Override Finally, you will test the global access for a blocked category and authenticate to apply a new web filter profile. You will also review the web filter logs to verify how actions change once the new web profile is applied. To test the web profile override 1. Open a new browser tab, and try to access www.youtube.com. A block page appears according to the action for this website category. However, this block message is different from the one that appeared in exercise 1. It includes an override link at the bottom: FortiGate I Student Guide 140 DO NOT REPRINT © FORTINET LAB 10–Web Filtering 2. Click Override. A block override message appears: 3. Enter the following credentials and click Continue: Field Value Username student Password fortinet FortiGate overrides the default profile and allows you to access the website. To review the web filter logs for web profile overrides 1. From the Local-FortiGate GUI, go to Log & Report > Web Filter. 2. Compare the current passthrough entries with the older block logs. 3. Click Details at the upper-right corner. Notice the web profile used is different. FortiGate I Student Guide 141 DO NOT REPRINT © FORTINET LAB 11–Application Control LAB 11–Application Control In this lab, you will configure and use the application control and cloud access security inspection (CASI) to take appropriate action on an application. You will view logs and monitor from FortiView. You will also use application control feature along with traffic shaping to limit the bandwidth of an application. Objectives Configure application control. Read and understand application control logs and applications from FortiView. Configure and monitor traffic shaping for application control. Configure CASI for granular control of applications. Time to Complete Estimated: 25 minutes Prerequisites Before beginning this lab, you must restore a configuration file to FortiGate. To restore the FortiGate configuration file 1. From the Local-Windows VM, open a web browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Dashboard, and from the System Information widget click Restore. 3. From your local PC (Local-Windows VM), click Upload and go to Desktop > Resources > FortiGate I Student Guide 142 DO NOT REPRINT © FORTINET LAB 11–Application Control FortiGate-I > Application-Control and select local-application-control.conf. 4. Click OK. 5. Click OK. FortiGate I Student Guide 143 DO NOT REPRINT © FORTINET LAB 11–Application Control 1 Creating an Application Control Profile In this exercise, you will create an application control profile. The FortiGate matches the traffic in this order: 1. application overrides 2. filter overrides 3. categories You will also view the application control logs and applications from FortiView to confirm the applications are logged correctly. Configuring Application Overrides The configuration file for this exercise already has the application control categories set to monitor (except Unknown Applications). This allows the applications to pass, but also records a log message. In this exercise, you will configure application overrides. The application overrides will take precedence over application categories. To configure application overrides 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Security Profiles > Application Control. 3. Review the default application control sensor. Verify that you are selecting the application sensor named default. 4. On the Edit Application Sensor page, click Add Signatures under Application Overrides to add an application signature. 5. In the Add Signature page, click Add Filter. 6. Click Name and type dailymotion in the search field. 7. From populated list, click the Dailymotion application to select it. 8. Click Dailymotion: 9. Click Use Selected Signature at the bottom. Your configuration should look like the following: FortiGate I Student Guide 144 DO NOT REPRINT © FORTINET LAB 11–Application Control The action for this should show as Block. 10. Click Apply at the bottom of the Edit Application Sensor page. Verifying that an Application Control Profile is Applied The configuration file for this exercise already has the default application control profile added to firewall policy and you will be verifying that. To verify that an application control profile is applied to a firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click the Seq.# column of the App_control firewall policy. 3. Click Edit. 4. Under the Security Profiles section, verify Application Control is turned on and the default application control sensor is selected. 5. Click Cancel. Testing the Application Control Profile Now your configuration is complete. You will test the application control profile by going to the application that you blocked in the application overrides configuration. To test application control profile 1. In the Local-Windows VM, open a new web browser window and go to the following URL: http://dailymotion.com. You should observe that you cannot connect to this site. It times out. 2. In the Local-FortiGate GUI, go to the Security Profiles > Application Control. 3. Edit the default application sensor again. 4. Enable Replacement Messages for HTTP-based Applications at the bottom of the profile. FortiGate I Student Guide 145 DO NOT REPRINT © FORTINET LAB 11–Application Control 5. Click Apply. 6. Go to the http://dailymotion.com website again. Now FortiGate should display a block message. Viewing Logs Now you will view the logs for the test you just performed. To view logs 1. In the Local-FortiGate GUI, go to Log & Report > Application Control. Note: The Application Control logs section will not display if there are no application control logs. FortiGate will show it after creating logs. If this menu item does not display, log out from the FortiGate GUI and log in again to refresh it. 2. Search and view the log information for Dailymotion to confirm that this action was correctly logged. 3. Double click on the log to view more details. It will show you application sensor name, name, category, and the action taken by FortiGate. 4. Go to Log & Report > Forward Traffic and search and view the log information for Dailymotion. You can see more details about this log such as NATed IP, Bytes sent/received, action, and application. FortiGate I Student Guide 146 DO NOT REPRINT © FORTINET LAB 11–Application Control 2 Limiting Traffic Using Traffic Shapers You can limit the bandwidth consumption of an application category or specific application by configuring a traffic shaping policy. You must ensure that the matching criteria aligns with the firewall policy or policies to which you want to apply shaping In this exercise, you will configure and apply traffic shaping to an application to limit its bandwidth consumption. Modifying Application Overrides Action You will be modifying the application override for Dailymotion application to change the action from Block to Monitor. Then you will apply traffic shaping in the next procedure. To modify Application Overrides action 1. From the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Security Profiles > Application Control. 3. Verify that you are selecting the application sensor named default. 4. Under Application Overrides, right-click Dailymotion and click Monitor. This will change the action for Dailymotion from Block to Monitor. 5. Click Apply. Note: In order for the traffic shaping, the signature must be allowed in application control profile. Configuring Traffic Shaper Policy The traffic shaper is preconfigured for you. You will be configuring a traffic shaper policy using the preconfigured traffic shaper to limit the bandwidth use for Dailymotion. To configure Traffic Shaper Policy 1. In the Local-FortiGate GUI, go to Policy & Objects > Traffic Shapers. 2. For the DAILYMOTION_SHAPER traffic shaper look closely at the Max Bandwidth column. You will notice that maximum amount of allowed bandwidth is very low. 3. Go to Policy & Objects > Traffic Shaping Policy and click Create New. 4. Configure the following. Field Value Source all Destination all FortiGate I Student Guide 147 DO NOT REPRINT © FORTINET Service ALL Application Dailymotion LAB 11–Application Control (Tip: Type the name in the search box on right hand side and click on Dailymotion to add.) Outgoing Interface port1 (Tip: Remember this is FortiGate egress interface.) Reverse Shaper Enable and apply DAILYMOTION_SHAPER Enable this policy: Enable Your configuration should look like this: 5. Click OK. Note: The Shared Shaper option is to limit the bandwidth from ingress-to-egress, useful for limiting uploading bandwidth. Reverse Shaper is to limit bandwidth from egress-to-ingress, useful for limiting downloading/streaming bandwidth. Note: You must ensure that the matching criteria align with the firewall policy or policies to which you want to apply shaping. Testing Traffic Shaping Now that your configuration is complete, you test traffic shaping by playing a video on Dailymotion. FortiGate I Student Guide 148 DO NOT REPRINT © FORTINET LAB 11–Application Control To test traffic shaping 1. In the Local-Windows VM, open a web browser and go to the following URL: http://dailymotion.com 2. Try to play any video. You will notice access to this site is slow and video is taking long time to buffer and play. Note: If your classroom is using a virtual lab, the underlying hardware is shared, and so the amount of available bandwidth for Internet access varies by usage by other simultaneous use. The traffic shaper is set to a very low value in order to make sure that the difference in behavior is easily noticeable. In real networks, this setting would be greater. 3. In the Local-FortiGate GUI, go to Policy & Objects > Traffic Shapers. 4. Review the DAILYMOTION_SHAPER for Bandwidth Utilization and Dropped Bytes columns. You might need to refresh the FortiGate GUI to view the statistics on Traffic Shapers. You will notice the bandwidth utilization by the Dailymotion application and FortiGate is dropping the packets which are in excess from the configured bandwidth in the traffic shaper. Note: Monitor statistics are current as of the time that you requested the GUI page, so make sure to view them while a video is downloading. Also refresh the page few times to get the results. FortiGate I Student Guide 149 DO NOT REPRINT © FORTINET LAB 11–Application Control 3 Configuring CASI The CASI profile allows fine-grained control over cloud applications such as YouTube, Dropbox, and Netflix to name a few. As most of the cloud based applications uses SSL encryption, you must enable deep inspection in the firewall policy. In this exercise, you will allow granular control over cloud based applications. Configuring a CASI Profile You will be configuring a CASI profile. To configure a CASI profile 1. On the Local-Windows VM, open a browser and log in as admin to the Local-FortiGate GUI at 10.0.1.254. 2. Go to Security Profiles > Cloud Access Security Inspection. 3. Review the default CASI profile on which all the applications action is set to monitor. 4. Under General.Interest, change the action to Block for Bing Search. 5. Click Apply at the bottom. Optional configuration: If you have account on www.facebook.com or www.linkedin.com, follow the steps below: Under Social.Media click on + sign besides Facebook and change the action to Block for Login. Under Social.Media click on + sign besides LinkedIn and change the action to Block for Login. Click Apply at the bottom. Enabling CASI and Verifying Deep Inspection is Enabled on the Firewall Policy As most of the cloud applications are HTTPS, so remember that for those, you will also need an SSL/SSH inspection profile in the firewall policy. Note: For CASI to work at all, man in the middle (MITM) must be correctly set up, without certificate warnings. Firefox uses its own certificate store, whereas Chrome and IE use Microsoft’s. In this environment, the FortiGate CA certificate for SSL inspection is preloaded into the Firefox browser. To enable CASI and verify deep inspection is enabled on firewall policy 1. In the Local-FortiGate GUI, go to Policy & Objects > IPv4 Policy. 2. Right click the Seq.# column of the App_control firewall policy and click Edit. 3. Under Security Profiles, enable CASI and select default from the associated drop-down list. 4. In the Security Profiles, verify that SSL/SSH Inspection is enabled and deep-inspection is selected. FortiGate I Student Guide 150 DO NOT REPRINT © FORTINET LAB 11–Application Control 5. Click OK. Testing CASI Now that your configuration is complete, you test CASI by going to the application that you configured. To test CASI 1. In the Local-Windows VM, open a new web browser window and go to the following URL: http://www.bing.com. 2. Try to search anything such as Fortinet, Youtube, or Facebook. The page will be blocked. Optional testing: If you have account on www.facebook.com or www.linkedin.com, you can open a new web browser window and go to https://www.facebook.com or https://www.linkedin.com. Try logging into your account. You will notice you are not able to login. 3. In the Local-FortiGate GUI, go to Log & Reports > Application Control. Note: The Application Control logs section will not display if there are no application control logs. FortiGate will show it after creating logs. If this menu item does not display, log out from the FortiGate GUI and log in again to refresh it. 4. Search the logs for Bing, Facebook, or LinkedIn. You will see similar logs as one below. In this example, look at the Application User and Application Details columns. For LinkedIn, login to LinkedIn is blocked, but access to the website is allowed in the log below. For Bing search, it shows the search phrase. FortiGate I Student Guide 151 DO NOT REPRINT © FORTINET Appendix A: Additional Resources Appendix A: Additional Resources Training Services http://www.fortinet.com/training Technical Documentation http://docs.fortinet.com Knowledge Base http://kb.fortinet.com Forums https://forum.fortinet.com/ Customer Service & Support https://support.fortinet.com FortiGuard Threat Research & Response http://www.fortiguard.com FortiGate I Student Guide 152 DO NOT REPRINT © FORTINET Appendix B: Presentation Slides Appendix B: Presentation Slides FortiGate I Student Guide 153 DO NOT REPRINT © FORTINET Introduction to Fortinet In this lesson, you will learn about FortiGate administration basics. This includes how – and where – FortiGate fits into your existing network architecture. FortiGate I Student Guide 154 DO NOT REPRINT © FORTINET Introduction to Fortinet After completing this lesson, you should have the practical skills and knowledge of FortiGate administration fundamentals required to do the following: • log in to your FortiGate • create administrator accounts • configure basic network settings, and • use your FortiGate’s GUI or CLI. You’ll also be able to set up FortiGate to act as your local network’s DNS or DHCP server. Lab exercises can help you to test and reinforce your skills. FortiGate I Student Guide 155 DO NOT REPRINT © FORTINET Introduction to Fortinet To start, let’s talk about how FortiGate is different from traditional firewalls or other vendors that you may have worked with. From the beginning, FortiGate has been synonymous with unified threat management (UTM): a traditional firewall with specialized security devices, such as VPN gateways and IPS sensors bundled into one device. FortiGate UTM proved popular with small-to-medium businesses (SMB) and enterprises or campuses that have many branch offices. However, for managed security service providers (MSSPs) and data centers looking for the best performance, Fortinet’s FortiASIC chips and next-generation firewall features have been popular instead. How can FortiGate serve all of these types of networks? FortiGate I Student Guide 156 DO NOT REPRINT © FORTINET Introduction to Fortinet In this architecture diagram, you can see how FortiGate platforms add strength, without compromising flexibility. Like separate, dedicated security devices, FortiGates are still internally modular. Plus: • • • • Devices add duplication. Sometimes, dedication doesn’t mean efficiency. If it’s overloaded, can one device borrow free RAM from nine others? Do you want to configure policies, logging, and routing on 10 separate devices? Does 10 times the duplication bring you 10 times the benefit, or is it a hassle? For smaller to midsize businesses or enterprise branch offices, UTM is often a superior solution compared to separate dedicated appliances. FortiGate hardware isn’t just off-the-shelf. It’s carrier-grade. Underneath, most FortiGate models have one or more specialized circuits called ASICs that are engineered by Fortinet. For example, a CP or NP chip handles cryptography and packet forwarding more efficiently. Compared to a single-purpose device with only a CPU, FortiGate can have dramatically better performance. This is especially critical for data centers and carriers where throughput is business critical. (The exception? Virtualization platforms – VMware, Citrix Xen, Microsoft, or Oracle Virtual Box – have general-purpose vCPUs. But, virtualization might be worthwhile due to other benefits, such as distributed computing and cloud-based security.) FortiGate is flexible. If all you need is fast firewalling and antivirus, FortiGate won’t require you to waste CPU, RAM, and electricity on other features. In each firewall policy, UTM and nextgeneration firewall modules can be enabled or disabled. Also, you won’t pay more to add VPN seat licenses later. What requires a subscription? Only ongoing FortiGuard subscription services. FortiGate cooperates. A preference for open standards instead of proprietary protocols means less vendor lock-in and more choice for system integrators. And, as your network grows, FortiGate can leverage other Fortinet products such as FortiSandbox and FortiWeb to distribute processing for deeper security and optimal performance – a total security fabric approach. FortiGate I Student Guide 157 DO NOT REPRINT © FORTINET Introduction to Fortinet If you deploy FortiGates as virtualized appliances – not physical – that platform still will be familiar. FortiGate virtual machines (VMs) have the same features as a physical FortiGate, except for hardware acceleration. Why? First, hypervisors’ hardware abstraction layer software is made by VMware, Xen, and other hypervisor manufacturers, not by Fortinet. Those other manufacturers don’t make Fortinet’s proprietary FortiASIC chips. But there is another reason, too. The purpose of hypervisors’ generic virtual CPUs and other virtual chips is to abstract the hardware details. That way, all VM guest OSs can run on a common platform, no matter the different hardware where the hypervisors are installed. Unlike vCPUs or vGPUs that use generic, non-optimal RAM and vCPUs for abstraction, FortiASIC chips are (by definition) specialized optimized circuits. Therefore, a virtualized ASIC chip would not have the same performance benefits as a physical ASIC chip. If performance on equivalent hardware is less, you may wonder, why would anyone use a FortiGate VM? In large scale networks that change rapidly and may have many tenants, equivalent processing power and distribution may be achievable by using larger amounts of cheaper, general purpose hardware. Also, trading some performance for other benefits may be worth it. The owner can benefit strongly from faster network and appliance deployment and teardown. FortiGate VMX and the FortiGate Connector for Cisco ACI extend this vision. They are a specialized version of FortiOS and an API that allow you to orchestrate rapid network changes through standards, such as OpenStack for software-defined networking (SDN). So: • FortiGate VM is deployed as a guest VM on the hypervisor. • FortiGate VMX is deployed inside a hypervisor’s vNetworks, between guest VMs. • FortiGate Connector for Cisco ACI allows ACI to deploy physical or virtual FortiGate VMs for North/South traffic. FortiGate I Student Guide 158 DO NOT REPRINT © FORTINET Introduction to Fortinet FortiGuard subscription services give your FortiGate access to 24 x 7 security updates powered by Fortinet’s researchers. Your FortiGate uses FortiGuard in two ways: • • by periodically requesting packages that contain a new engine and many signatures, and by querying the FDN on an individual URL or host name. Queries are real-time – that is, FortiGate asks the FDN every time it scans for spam or filtered websites. Also, queries use UDP for transport – they are connectionless and the protocol is not designed for fault tolerance, but for speed. So, they require that your FortiGate have a reliable Internet connection. Downloaded packages like antivirus and IPS, however, aren’t that frequent. They use TCP for reliable transport. Their associated FortiGate features continue to function even if FortiGate does not have reliable Internet connectivity. Keep in mind, though, that you should still avoid interruptions. If your FortiGate must try repeatedly to download updates, it can’t detect new threats during that time. FortiGate I Student Guide 159 DO NOT REPRINT © FORTINET Introduction to Fortinet So now you’ve seen a simplified overview of the software architecture. What about the network architecture? Where does FortiGate fit in? When you deploy a FortiGate, you can choose on the dashboard between two modes: NAT or transparent. • • In NAT mode, FortiGate forwards packets based on Layer 3, like a router. Each of its logical network interfaces have an IP address. In transparent mode, FortiGate forwards packets at Layer 2, like a switch. So, except for the management interface, its interfaces have no IP address. Interfaces can be exceptions to the router vs. switch operation mode on an individual basis, however. We’ll show these later. FortiGate I Student Guide 160 DO NOT REPRINT © FORTINET Introduction to Fortinet What does that mean for your traffic, in terms of the 7-layer OSI model? Which operation mode should you choose? NAT mode is the most common choice. In NAT mode, the destination address is the FortiGate’s address. Typically, FortiGate will rewrite the destination address, and/or port number and source address in the IP network layer, into the server’s private network address before forwarding the packet – in other words, it will apply NAT and port forwarding. Depending on your presentation and application layer protocols, it might also: • • Terminate SSL or TLS sessions so back-end servers don’t need to decrypt Modify the addresses in the application layer headers, such as the Host and X-Forwarded-For addresses in the HTTP header So, NAT mode works well for edge or gateway security, where you divide your private IPv4 network from an external network such as guest Wi-Fi or the Internet. In transparent mode, the destination address is the server’s address – not a FortiGate’s interface. As a result, it usually doesn’t need to rewrite encapsulated layers – with the exception of TCP SYNrelated analysis. Only the MAC address in the frame is rewritten. So, in complex IP environments such as MSSP or mobile phone carriers, this simplifies deployment. Only the management interface needs an IP address. But because network-facing interfaces don’t have an IP address, you must verify that your topology doesn’t have any loops at Layer 2 – Ethernet. FortiGate I Student Guide 161 DO NOT REPRINT © FORTINET Introduction to Fortinet NAT mode is the default operation mode. What are the other default settings? Once you’ve removed your FortiGate from its box, what do you do next? Let’s take a look at how you set up a FortiGate. Attach your computer’s network cable to port1 or the internal switch ports (depending on your model) to begin setup. In most of the low-end models, there is a DHCP server on that interface, so, if your computer’s network settings have DHCP enabled, your computer should automatically get an IP, and you can begin setup quickly. To access the GUI on FortiGate or FortiWifi, open a web browser and go to http://192.168.1.99. Remember: the default login is publicly available knowledge. Never leave the default password blank! Your network is only as secure as your FortiGate’s admin account. Before you connect your FortiGate to your overall network, you should set a complex password. You should also restrict it so that FortiGate allows administrative connections only from your local console or management subnet. FortiGate I Student Guide 162 DO NOT REPRINT © FORTINET Introduction to Fortinet What happens if you forget the password for your admin account, or a hostile employee changes it? This recovery method is available on all FortiGate devices and even some non-FortiGate devices like FortiMail. It’s a temporary account, only available through the local console port, and only after a hard reboot – disrupting power by unplugging or switching off the power, then restoring it. FortiGate must be physically shut off, then turned back on – not simply rebooted through the CLI. That’s the difference between a hard boot and a soft boot. Even then, the maintainer login will only be available for login for about 30 seconds after boot completes. If you can’t ensure physical security, or have compliance requirements, you can disable the maintainer account. Use caution: if you disable maintainer and then lose your admin password, you cannot recover access to your FortiGate. FortiGate I Student Guide 163 DO NOT REPRINT © FORTINET Introduction to Fortinet All FortiGate models have a console port. This provides CLI access without a network. • • • On older models, it’s a serial port. A standard null modem cable can be used to connect the serial port to your computer’s serial port. On newer models, it’s an RJ-45 port. Access by connecting an RJ-45-to-serial cable from your computer’s serial port to the RJ-45 port on the FortiGate. In some newer models, the console port is a USB2 port. In that case, you’ll plug in the USB cable, then open FortiExplorer. Each device ships with its appropriate cable. Serial ports on computers are becoming less common. If your computer has one, you can purchase a USB-to-serial adapter. FortiGate I Student Guide 164 DO NOT REPRINT © FORTINET Introduction to Fortinet Most features are available in both the GUI and CLI, but there are a few exceptions. For example, reports can’t be viewed in the CLI. Also, the rarely used advanced settings and diagnostic commands for power users are usually not available in the GUI. What if you don’t want to use the GUI? There is also a CLI. As you become more familiar with FortiGate, and especially if you want to script its configuration, you may want to use the CLI in addition to the GUI. You can access the CLI through either the JavaScript widget in the GUI named CLI Console, or through a terminal emulator such as Tera Term (http://ttssh2.sourceforge.jp/index.html.en) or PuTTY (http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html). Your terminal emulator can connect through the network – SSH or telnet – or the local console port. SNMP and some other administrative protocols are also supported, but they are read-only. They can’t be used for basic setup. Let’s focus on setup now. FortiGate I Student Guide 165 DO NOT REPRINT © FORTINET Introduction to Fortinet Whichever method you use, start by logging in as admin. Begin by creating accounts for other administrators. It’s not shown here, but instead of creating accounts on FortiGate itself, you could configure FortiGate to query a remote authentication server. You could also require personal certificates authenticated through your PKI certificate authority, instead of passwords. Choose strong, complex passwords. For example, you could use multiple interleaved words with varying capitalization, and randomly insert numbers and punctuation. Do not use short passwords, or passwords that contain names, dates, or words that exist in any dictionary. These will be very weak against brute force attacks. To audit the strength of your passwords, use tools such as L0phtcrack (http://www.l0phtcrack.com/) or John the Ripper (http://www.openwall.com/john/). Risk of attackers brute forcing your firewall is especially high if you connect the management port to the Internet. In order to restrict access to specific features, you can assign permissions. FortiGate I Student Guide 166 DO NOT REPRINT © FORTINET Introduction to Fortinet When assigning permissions in an admin profile, you can specify read-and-write, read-only, or no access to each area. By default, there is a special profile named super_admin, which is used by the account named admin. It cannot be changed. It provides full access to everything, making the admin account similar to a root superuser account. The prof_admin is another default profile. It also provides full access, but unlike super_admin, it only applies to its virtual domain – not the global settings of the FortiGate. Also, its permissions can be changed. You aren’t required to use a default profile. You could, for example, create a profile named auditor_access with read-only permissions. Restricting a person’s permissions to those necessary for his or her job is a good best practice, because even if that account is compromised, the compromise is not complete. To do this, create administrative admin profiles, then select the appropriate profile when configuring an account. FortiGate I Student Guide 167 DO NOT REPRINT © FORTINET Introduction to Fortinet What are the effects of admin profiles? It’s actually more than just read or write access. Depending on the type of admin profile that you assign, each administrator may not be able to access the entire FortiGate. For example, you could configure an account that can only view log messages. Administrators may not be able to access global settings outside their assigned virtual domain either. Virtual domains (VDOMs) are a way of subdividing the resources and configurations on a single FortiGate. VDOMs are explained in more detail in the FortiGate II: Virtual Domains lesson. Administrators with a smaller scope of permissions cannot create, or even view, accounts with more permissions. So, for example, an administrator using the prof_admin or a custom profile cannot see – or reset the password of – accounts that use the super_admin profile. FortiGate I Student Guide 168 DO NOT REPRINT © FORTINET Introduction to Fortinet To further secure access to your network security, use two-factor authentication. Two-factor authentication just means that instead of only using one method to verify your identity – typically a password or personal certificate – you verify identity in two ways. In the example shown here, two-factor authentication would mean a password plus an RSA randomly generated number from a FortiToken that is synchronized with FortiGate. FortiGate I Student Guide 169 DO NOT REPRINT © FORTINET Introduction to Fortinet FortiToken is not the only option if you want to use two-factor authentication. Remember, two-factor only means that you use two methods to verify a person’s identity. Alternatively, instead of using FortiToken, FortiGate can send an email to the administrator’s address, or send a text message as a form of authentication. To be able to do this, you must first configure FortiGate with the settings of a mail server (so that it can use it to send email), or an SMS server. The mail server can be configured under the Advanced page in the GUI, or in the CLI. SMS settings, however, are CLI only. FortiGate I Student Guide 170 DO NOT REPRINT © FORTINET Introduction to Fortinet Another way to secure your FortiGate is to define which hosts or subnets are trusted sources of login attempts. Define all three, for all accounts. (If you leave any IPv4 address as 0.0.0.0/0, it means that connections from any source IP will be allowed – obviously not what you want.) Notice that each account can define its management host or subnet differently. This is especially useful if you will be setting up VDOMs on your FortiGate, where the VDOM’s administrators may not even belong to the same organization. Now try to access FortiGate’s GUI or CLI from an external IP. Does it work? No. Your web browser or terminal emulator won’t receive a response. Not even to a ping. Unless you connect from the network administrators’ subnet, FortiGate won’t allow you to even try to log in. So external brute force is impossible. So is discovery by ICMP. FortiGate I Student Guide 171 DO NOT REPRINT © FORTINET Introduction to Fortinet You may also want to customize the administrative protocols’ port numbers. You can also choose whether to allow concurrent sessions. This can be used to prevent accidentally overwriting settings, if you usually keep multiple browser tabs open, or accidentally leave a CLI session open without saving the settings, then begin a GUI session and accidentally edit the same settings differently. For better security, use only secure protocols, and enforce password complexity and changes. FortiGate I Student Guide 172 DO NOT REPRINT © FORTINET Introduction to Fortinet We’ve defined the management subnet – that is, the trusted hosts – for each administrator account. How do you enable or disable management protocols? This is specific to each interface. For example, if your administrators connect to FortiGate only from port1, you should disable all administrative access on all other ports. This prevents brute force attempts and also insecure access. Notice that some protocols like FortiTelemetry are not actually for administrative access, but, like GUI and CLI access, they are protocols where the packets will have FortiGate as a destination IP – not only use FortiGate as the next hop or bridge. For better security, it’s always best to only use secure, encrypted methods of access. Some protocols – such as telnet, ICMP, HTTP, and SNMP version 1 – don’t have encryption or even authentication. So they should never be enabled on public, untrusted networks. IPv4 and IPv6 protocols are separate. It’s possible, for example, to have both IPv4 and IPv6 addresses on an interface, but only respond to pings on IPv6. However, IPv6 is hidden in the GUI by default. How do you show IPv6 settings? FortiGate I Student Guide 173 DO NOT REPRINT © FORTINET Introduction to Fortinet FortiGate has hundreds of features. If you don’t use all of them, hiding features that you don’t use makes it easier to focus on your work. Hiding a feature in the GUI does not disable it. It is still functional, and still can be configured through the CLI. Some advanced or less commonly used features, such as IPv6, are hidden by default. To show hidden features, go to the Feature Select page. FortiGate I Student Guide 174 DO NOT REPRINT © FORTINET Introduction to Fortinet Link aggregation is when multiple physical interfaces are logically bound into a single channel. Link aggregation increases bandwidth and provides redundancy between two network devices. FortiGate I Student Guide 175 DO NOT REPRINT © FORTINET Introduction to Fortinet Once you have administrator accounts, they can configure the network interfaces. Remember, when the FortiGate device is in NAT mode, every interface that handles traffic must have an IP address. There are two exceptions to this rule, which we will cover next. When in NAT mode, the IP address allows packets with this interface to have a source and destination at the IP layer. There are multiple ways to get an IP address: • • Manual Automatic, using either DHCP or PPPoE (PPPoE is configured through the CLI) As we mentioned earlier, there are two exceptions to the IP address requirement: One-Arm Sniffer and Dedicate to FortiSwitch interfaces. These interfaces aren’t assigned an address. • • When One-Arm Sniffer is selected as the addressing mode, it operates in promiscuous mode. As a result, regardless of each packet’s destination address, FortiGate can inspect all traffic that arrives. So, although the overall FortiGate is in NAT mode, acting as a router, the One-Arm Sniffer interface does not act as a router. It receives traffic, but cannot send. There are more considerations, which are in the FortiGate II Intrusion Prevention System lesson. When Dedicated to FortiSwitch is selected as the addressing mode, FortiGate automatically assigns an IP address to this interface. The Dedicated to FortiSwitch is an interface setting that is used to manage FortiSwitch from the FortiGate. FortiGate I Student Guide 176 DO NOT REPRINT © FORTINET Introduction to Fortinet How many times you have seen network issues caused by a DHCP server – not client – enabled on the WAN interface? Beginning in FortiOS 5.4.0, you can configure the interface’s role. Roles show only normal interface settings for that part of a topology. Settings that do not apply to the current role are hidden. This prevents accidental misconfiguration. For example, when the role is configured as WAN , there is no DHCP server, device detection, and secondary IP address configuration available. Device detection is usually used to detect devices internally on your LAN; that is, you won’t offer IP addresses to all hosts on the Internet, and so on. If there is an unusual case, and you need to use an option that’s hidden by the current role, you can always switch the role to Undefined. This displays all options. To help you remember the use of each interface, you can give them aliases. For example, you could call port3 lab_network. This can help to make your list of policies easier to comprehend. FortiGate I Student Guide 177 DO NOT REPRINT © FORTINET Introduction to Fortinet Wireless clients aren’t the only ones that can use FortiGate as their DHCP server. For an interface (such as port3), select the Manual option, enter a static IP, and then enable the DHCP Server option. Options for the built-in DHCP server will appear, including provisioning features, such as DHCP options and MAC reservation. You can also block specific MAC addresses, as if there were a Layer 2 firewall policy. FortiGate I Student Guide 178 DO NOT REPRINT © FORTINET Introduction to Fortinet For the built-in DHCP server, you can reserve specific IP addresses for devices with specific MAC addresses. Those devices will always receive the same lease, unless the number of devices exceeds the size of the IP pool. FortiGate I Student Guide 179 DO NOT REPRINT © FORTINET Introduction to Fortinet Like with DHCP, you can also configure FortiGate to act as your local DNS server. You can enable and configure DNS separately, on each interface. A local DNS server can improve performance for your FortiMail or other devices that use DNS queries frequently. If your FortiGate offers DHCP to your local network, DHCP can be used to configure those hosts to use FortiGate as both the gateway and DNS server. FortiGate can answer DNS queries in one of three ways: • • • by relaying all queries – that is, acting as a DNS relay instead of a DNS server, by relaying only the queries it can’t resolve to your ISP’s DNS server, or by returning a null response if it can’t resolve queries itself. Beginning with FortiOS 5.4, you can configure all modes in the GUI, without using the CLI. FortiGate I Student Guide 180 DO NOT REPRINT © FORTINET Introduction to Fortinet If you choose the DNS forwarding option, you can control DNS queries within your own network, without having to enter any DNS names in FortiGate’s DNS server. FortiGate I Student Guide 181 DO NOT REPRINT © FORTINET Introduction to Fortinet If you choose to have your DNS server resolve queries, or you choose a split DNS, you must set up a DNS database on your FortiGate. This defines the host names that FortiGate will resolve queries for. Use the zone file syntax outlined by RFCs 1034 and 1035. FortiGate I Student Guide 182 DO NOT REPRINT © FORTINET Introduction to Fortinet Lastly, before you can integrate FortiGate into your network, FortiGate must have a default gateway. If FortiGate gets its IP address through a dynamic method such as DHCP or PPPoE, then it will also retrieve the default gateway. Otherwise, you must configure a static route. Without this, FortiGate will not be able to respond to packets outside the subnets directly attached to its own interfaces. It probably also won’t be able to connect to FortiGuard for updates, and may not properly route traffic. Routing details are covered in another lesson. For now, you should usually make sure that FortiGate has a route that matches all packets (destination is 0.0.0.0/0), and forwards them through the network interface that is connected to the Internet, to the IP address of the next router. Routing completes the basic network settings that are required before you can configure firewall policies. FortiGate I Student Guide 183 DO NOT REPRINT © FORTINET Introduction to Fortinet Now that FortiGate has basic network settings and administrative accounts, let’s look at how to back up the configuration. You can encrypt configuration files with a password, if necessary. Besides securing the privacy of your configuration, it also has some effects you may not expect. Once encrypted, the configuration file cannot be decrypted without the password and a FortiGate of the same model and firmware. This means that if you send an encrypted configuration file to Fortinet Technical Support, even if you give them the password, they still cannot load your configuration until they get access to the same model of FortiGate. This can cause unnecessary delays when resolving your ticket. Even if the configuration is not encrypted as a whole, each password is encrypted individually. So in many cases, encrypting the entire configuration file may not be necessary. If you enable virtual domains, subdividing the resources and configuration of your FortiGate, each VDOM administrator can back up and restore their own configurations. You don’t have to back up the entire FortiGate configuration. FortiGate I Student Guide 184 DO NOT REPRINT © FORTINET Introduction to Fortinet If you open the configuration file in a text editor, you’ll see that both encrypted and unencrypted configuration files contain a clear text header that contains some basic information about the device. The diagram shown here shows what information is included. To restore an encrypted configuration, you must upload it to the same model of FortiGate, with the same firmware version, then provide the password. To restore an unencrypted configuration file, you are only required to match the FortiGate model. If the firmware is different, FortiGate will attempt to upgrade the configuration, similar to how it uses upgrade scripts on the existing configuration when upgrading firmware. Usually, the configuration file only contains non-default settings, plus a few default, yet crucial, settings. This minimizes the size of the backup, which could otherwise be several MB in size. FortiGate I Student Guide 185 DO NOT REPRINT © FORTINET Introduction to Fortinet Upgrading the firmware on a FortiGate is simple. The easiest method is to click the Update link on the System Information widget on the dashboard, then choose a firmware file that you have downloaded from support.fortinet.com. If you want to make a clean install by overwriting both the existing firmware and its current configuration, you can do this using the local console CLI, within the boot loader menu, while FortiGate is rebooting. However, this is not the usual method. FortiGate I Student Guide 186 DO NOT REPRINT © FORTINET Introduction to Fortinet You can also downgrade the firmware. Since settings change in each firmware version, you should have a configuration file in the syntax that is compatible with the firmware. Remember to read the release notes. Sometimes a downgrade between firmware versions that preserves the configuration is not possible, such as when the OS changed from 32-bit to 64-bit. In that situation, the only way to downgrade is to format the disk, then reinstall. Once you’ve determined the downgrade is possible, verify everything again, then start the downgrade. After the downgrade completes, restore a configuration backup that is compatible with that version. Why should you keep emergency firmware and physical access? Old firmware versions don’t know how to convert future configurations. Also, when upgrading through a path that is not supported by the configuration translation scripts, you might lose all settings except basic access settings, such as administrator accounts and network interface IP addresses. Another rare, but possible, scenario is that the firmware could be corrupted when you are uploading it. For all of those reasons, you should always have local console access during an upgrade, in case of emergency. However, in practice, if you read the release notes and have a reliable connection to the GUI or CLI, it should not usually be necessary. FortiGate I Student Guide 187 DO NOT REPRINT © FORTINET Introduction to Fortinet To review, these are the topics that we just talked about. We looked at how FortiGate can replace multiple single-purpose devices, yet increase power efficiency and throughput. We explained the differences between FortiGuard services, and how those are part of the UTM architecture. We showed how to configure administrator accounts, permissions, and how to harden administrative access. We also explained how to choose the operation mode based upon the behavior you need for each network interface, how to configure the network settings, and finally how to back up the configuration and install firmware. FortiGate I Student Guide 188 DO NOT REPRINT © FORTINET Logging and Monitoring In this lesson, we’ll examine logging and monitoring on the FortiGate. FortiGate I Student Guide 189 DO NOT REPRINT © FORTINET Logging and Monitoring After completing this lesson, you should have these practical skills that you can use to better secure your network through logging and monitoring. This includes: • • • • • • • • • • • Describing log types and subtypes Describing log severity levels Describing log format (header and body) Identifying log storage locations Configuring log settings Configuring remote logging Enabling logging on firewall policies Viewing, filtering, downloading, and exporting logs Monitoring your network Configuring alert email Configuring, running, and viewing reports FortiGate I Student Guide 190 DO NOT REPRINT © FORTINET Logging and Monitoring When traffic passes through FortiGate to your network, FortiGate scans the traffic and then takes action based on the firewall policies in place. This activity is recorded and the information is contained in a log message. The log message is stored in a log file that is then stored on a device capable of storing logs, such as FortiGate or an external storage device. The purpose of logs is to help you monitor your network traffic, locate problems, establish baselines, and more. Logs provide you with a greater perspective of your network, allowing you to make adjustments to your network security, if necessary. Some organizations have legal requirements when it comes to logging, so it is important to be aware of your organization’s policies during configuration. FortiGate I Student Guide 191 DO NOT REPRINT © FORTINET Logging and Monitoring In this section, we will briefly examine logs, including log types and subtypes, log severity levels, and log message layout. FortiGate I Student Guide 192 DO NOT REPRINT © FORTINET Logging and Monitoring On FortiGate, there are three different types of logs: traffic logs, event logs, and security logs. Each type is further divided into sub-types. Traffic logs record traffic flow information, such as an HTTP/HTTPS request and its response, if any. It contains subtypes named forward, local, and sniffer. • Forward traffic logs contain information about traffic that FortiGate either accepted or rejected according to a firewall policy. • Local traffic logs contain information about traffic directly to and from the FortiGate’s management IP addresses. They also include connections to the GUI and FortiGuard queries. • Sniffer logs contain information related to packet capture. Event logs record system and administrative events, such as adding or modifying configuration, or daemon activities. It contains subtypes named endpoint control, high availability, system, user, router, VPN, WAD, and wireless. • System event logs contain information related to operations, such as automatic FortiGuard updates and GUI logins. • User logs contain logon and logoff events for firewall policies with user authentication. • Router, VPN, WAD, and wireless subtypes include logs for those features. For example, VPN contains IPsec and SSL VPN log entries. Finally, security logs record logs for the security events such as virus attacks and intrusion attempts. They contain log entries based on the security profile type (log type = utm), including Application Control, Antivirus, DLP, Anti-Spam (Email Filter), Web Filter, Intrusion Protection, Anomaly (DoSpolicy), and WAF. Security logs and subtypes are only visible in the GUI menu if logs are created within it—if no security logs exists, the log menu item does not appear. FortiGate I Student Guide 193 DO NOT REPRINT © FORTINET Logging and Monitoring It should be noted that, by default, events related to security appear in the Forward Traffic log in the Log Details pane under the Security tab. This is for performance: fewer open file handles is less CPU intensive for the operating system. FortiGate I Student Guide 194 DO NOT REPRINT © FORTINET Logging and Monitoring Each log entry includes a log level (or priority level) that ranges in order of importance from emergency to information. There is also a debug level, the lowest level. It puts diagnostic information into the event log. The debug level is rarely used, unless you are actively investigating an issue with Fortinet Technical Support. Generally, the lowest level you want to use is information, but even this level generates many logs and could cause premature hard disk failure. Depending on the type of log and the needs of your organization, you may want to log only notification levels or higher. You and your organization’s policies dictate what must be logged. FortiGate I Student Guide 195 DO NOT REPRINT © FORTINET Logging and Monitoring Every log message has a standard layout comprised of two sections: a header and a body. The header contains fields that are common to all log types, such as originating date and time, log identifier, log category, severity level, and virtual domain (VDOM). The value of each field, however, is specific to the log message. As you can see in the raw log entry example, the log type is UTM, the subtype is webfilter, and the level is warning. The type and subtype of logs determine what fields appear in the log body. The body, therefore, describes the reason why the log was created and actions taken by FortiGate. These fields vary by log type. In the above example, the policyid field indicates which firewall rule matched the traffic, the scrip field indicates the source IP address, the dstip field indicates the destination IP address, the hostname indicates the URL or IP of the host, the action field indicates what FortiGate did when it found a policy that matched the traffic, and the msg fields indicates the reason for the action taken. In this example, the action is blocked, which means that FortiGate prevented this IP packet from passing, and the reason is because it belonged to a denied category in the firewall policy. If you log to a third-party device, such as a syslog server, knowing the log structure is crucial to integration. For information on log structures and associated meanings, visit http://docs.fortinet.com. FortiGate I Student Guide 196 DO NOT REPRINT © FORTINET Logging and Monitoring This section explains log storage options on FortiGate. FortiGate I Student Guide 197 DO NOT REPRINT © FORTINET Logging and Monitoring You can choose to store logs in a variety of places, both on and off the FortiGate device. Locally, FortiGate has its own memory and many devices have a built-in hard drive. Externally, you can store logs on Syslog servers, FortiCloud, SNMP, or a FortiAnalyzer or FortiManager device. FortiGate I Student Guide 198 DO NOT REPRINT © FORTINET Logging and Monitoring FortiAnalyzer and FortiManager are external logging devices with which FortiGate can communicate. You can place FortiAnalyzer or FortiManager in the same network as FortiGate, or outside of it. In order for FortiGate to send logs to FortiAnalyzer or FortiManager, you must register FortiGate with FortiAnalyzer or FortiManager. Once registered, the FortiAnalyzer or FortiManager can begin to accept incoming logs from FortiGate. FortiGate uses port 514 for log transmission. Optionally, you can encrypt communications using SSL encrypted OFTP traffic, so when a log message is generated, it is safely transmitted across an unsecure network. Log messages are stored on disk and transmitted to FortiAnalyzer as plain text in LZ4 compressed format. This reduces disk log size and reduces log transmission time and bandwidth usage. FortiGate I Student Guide 199 DO NOT REPRINT © FORTINET Logging and Monitoring So far, we’ve discussed FortiAnalyzer and FortiManager as interchangeable external logging devices for FortiGate. While configuring FortiGate to send logs to FortiAnalyzer or FortiManager is identical — they share a common hardware and software platform — FortiAnalyzer and FortiManager actually have different capabilities that are worth noting. Both take log entries, but the primary purpose of FortiManager is to centrally manage multiple FortiGate devices. As such, log volumes are limited to a fixed amount per-day, which are less than FortiAnalyzer. On the other hand, the primary purpose of FortiAnalyzer is to store and analyze logs, so the log limit is much higher (though the limit is modeldependent). At the most basic level, what you can do with the logs received on FortiManager is no different than what you can do with logs received on FortiAnalyzer. FortiGate has two methods for transmitting the log events: store and upload and real-time. The store and upload option is only available to FortiGates with internal hard drives. FortiGate I Student Guide 200 DO NOT REPRINT © FORTINET Logging and Monitoring FortiCloud and Syslog are other external logging options you can use to store FortiGate logs. FortiCloud is a Fortinet subscription-based, hosted security management and log retention service that offers long-term storage of logs with reporting. If you have a smaller network, FortiCloud is usually more feasible than buying a dedicated logging appliance. Every FortiGate comes with a free one month trial of FortiCloud. Through the FortiGate GUI, you can bind FortiCloud to your Fortinet Technical Support & Customer Service account, activate the trial, and start sending logs. When disk usage is set to WAN optimization (wanopt), the store and upload option for logging to FortiCloud is also removed. Syslog is a logging server that is used as a central repository for networked devices. FortiGate can send logs to a Syslog server. FortiGate I Student Guide 201 DO NOT REPRINT © FORTINET Logging and Monitoring Logging FortiGate activity requires certain configuration settings so that FortiGate can record the activity. These settings are referred to as log settings. While you can configure logs through the CLI using the config log command, this section focuses mainly on the GUI. For effective logging, your FortiGate system date and time should be accurate. You can either manually set the system date and time, or configure FortiGate to automatically keep its time correct by synchronizing with a Network Time Protocol (NTP) server. FortiGate I Student Guide 202 DO NOT REPRINT © FORTINET Logging and Monitoring This chart illustrates the expected behavior when you enable different logging options. The first column, Policy Log Setting, shows the log setting on the firewall policy: Log Allowed Traffic (enable or disable), Security Events (enable or disable), or All Sessions (enable or disable). In the associated example screenshot, Log Allowed Traffic is enabled and All Sessions is enabled. The second column shows whether a security profile is enabled or disabled on the firewall policy. In the associated example screenshot, an Antivirus security profile is enabled. The last column shows the behavior. If you enable any profiles on your policy and logging is not enabled, you will not get logs of any kind—even if the profile is configured to block the traffic. So, if you apply a security profile, it’s important to consider the logging setting. FortiGate I Student Guide 203 DO NOT REPRINT © FORTINET Logging and Monitoring From the Log Settings page, you can enable local logging to disk, as well as enable local reports and historical FortiView. A pie chart illustrates disk usage, informing you how much used space and free space is available on your local disk. A historical disk usage chart is also available. Disk logging must be enabled in order for information to appear in the FortiView dashboards (if disabled, logs display in real-time only). You can also enable this setting through the CLI config log disk setting command. Only certain FortiGate models support disk logging. Note that logs older than seven (7) days, by default, are deleted from disk (log age is configurable). If your log disk becomes full, event logs are deleted last. You can back up local disk logs using the execute log backup CLI command. FortiGate I Student Guide 204 DO NOT REPRINT © FORTINET Logging and Monitoring You can configure remote logging to FortiAnalyzer or FortiManager through both the GUI and the CLI. • • GUI: From the Log Settings page, enable logging to FortiAnalyzer/FortiManager and enter the IP address of the remote logging device. CLI: For both FortiAnalyzer and FortiManager, use the config log fortianalyzer setting command. Even though FortiManager isn’t explicitly mentioned in the command, it is used for FortiManager as well. Through the CLI, up to three separate devices for maximum failover protection of log data can be added. The command for the three devices are not cumulative. You must also specify how you want to upload your logs. You can choose to store logs to disk and then upload to FortiAnalyzer or FortiManager later—in which case you need to specify a schedule (for example, daily at 00:59)—or you can upload logs in real-time. Generating logs uses system resources, so if FortiGate frequently creates and sends logs to multiple places, CPU and RAM usage will increase. You can encrypt communications using SSL-secured OFTP by enabling Encrypt Log Transmission. FortiGate I Student Guide 205 DO NOT REPRINT © FORTINET Logging and Monitoring You can configure remote logging to FortiCloud through the Log Settings page as well. But before you can enable logging to FortiCloud, you must first activate your FortiCloud account. Once activated, you can enable FortiCloud logging. You must add your FortiCloud account so FortiGate can communicate with your FortiCloud account and set the upload option. If you want to store your logs to disk first and then upload to FortiCloud, you must specify a schedule. FortiGate I Student Guide 206 DO NOT REPRINT © FORTINET Logging and Monitoring You can also configure remote logging to Syslog through the Log Settings page. You must add the Syslog IP address or FQDN so FortiGate and Syslog can communicate. From the CLI, you can configure up to four remote Syslog servers with the config log syslogd command. FortiGate I Student Guide 207 DO NOT REPRINT © FORTINET Logging and Monitoring You can also choose which events you want to appear in the local traffic log and the event log. Local traffic logs provide information about traffic directly to and from FortiGate. This option is disabled by default due to the large number of logs they can generate. Event logs provide all of the system information generated by the FortiGate device, such as administrator logins, configuration changes made by administrators, user activity, and daily operations of the device—they are not caused by traffic passing through firewall policies. For example, routebased VPNs going up and down or routing protocol activity are not caused by traffic passing through a firewall policy. One exception might be the user log, as it does record user logon/logoff events on traffic that passes through policies. The event logs you choose to enable depends on what features you are implementing and what information you need to get out of the logs. FortiGate I Student Guide 208 DO NOT REPRINT © FORTINET Logging and Monitoring Additionally, you can configure how logs are displayed in the GUI. For example, you can specify whether the GUI: • • displays logs from memory, disk, or FortiAnalyzer resolves IPs to host names. This requires FortiGate to perform reverse DNS lookups for all the IPs. If your DNS server is not available or is slow to reply, this can impact your ability to look through the logs as the requests will time out. FortiGate I Student Guide 209 DO NOT REPRINT © FORTINET Logging and Monitoring You can configure the threat weight definition through the Threat Weight page. This allows you to set the risk values for low, medium, high, and critical levels, and then apply a threat weight to each category-based item. In the above example, malware has a threat weight of critical. You can adjust this threat weight based on your organizational requirements. Once threat weight is configured, you can view all detected threats from the Threats page. FortiGate I Student Guide 210 DO NOT REPRINT © FORTINET Logging and Monitoring Once all your logging settings are configured, you can enable logging on your firewall policies. Only when enabled on a firewall policy can a log message generate (based on configured log settings). Generally, if you configure your FortiGate to inspect traffic, you should also enable logging for that security feature to help you track and debug your traffic flow. Except for violations that you consider to be low in severity – web filtering, for example – you’ll want to know if your FortiGate is blocking attacks. Most attacks don’t succeed in a security breach on the first try. A proactive approach, when you notice a persistent attacker whose methods seem to be evolving, can avoid a security breach. To get early warnings like this, enable logging for your security profiles. To enable logging on security profiles, edit your firewall policy, enable the security profile, and select your configured security profile from the associated drop-down list. Remember that you will not get logs of any kind if Log Allowed Traffic isn’t enabled in the Logging Options section. FortiGate I Student Guide 211 DO NOT REPRINT © FORTINET Logging and Monitoring It’s important to remember that the more logs that get generated, the heavier the toll on your CPU and memory resources. Storing logs for a period of time also requires disk space, as does accessing them. So, before configuring logging, make sure it is worth the extra resources and that your system can handle the influx. Also important to note is logging behavior with security profiles. Security profiles create log events when traffic is detected. Depending on the amount of traffic you have and logging settings that are enabled, your traffic logs can swell and, ultimately, impact the performance of your firewall. On remote logging devices, such as FortiAnalyzer and Syslog, you can enable performance statistic logging on FortiGate from the CLI to occur every 1-15 minutes. This is not available for local disk logging or FortiCloud. FortiGate I Student Guide 212 DO NOT REPRINT © FORTINET Logging and Monitoring In this section, we will examine how to view, filter, download, and export logs. While you can view and manage logs though the CLI using the execute log filter and execute log display commands, this section focuses on the GUI. FortiGate I Student Guide 213 DO NOT REPRINT © FORTINET Logging and Monitoring You can view your logs in the GUI under the Log & Report menu. The options that appear in this menu depend on your configuration. Security logs appear only if security events exist. Select the type of log you want to view, such as Forward Traffic. Logs then appear in a formatted table view. To view the log details, select the log from the table. The log details then appear in the Log Details pane to the right. If archiving is enabled on security profiles that support it (such as DLP), archiving information appears within the Log Details pane under the Archived Data section. Archived logs are also recorded when using FortiAnalyzer or FortiCloud. If you configured FortiGate to log to multiple locations and want to view logs from those locations, you must specify the location from the Log Settings page. In this screenshot, the log location is set to Disk, as that is the configured setting on the Log Settings page. If logging to a remote location, such as Syslog, you must view logs through that device instead. FortiGate I Student Guide 214 DO NOT REPRINT © FORTINET Logging and Monitoring Depending on your configuration, your FortiGate might record a high volume of logs. This can make it more difficult to locate a specific log or log type, especially during an investigation. To navigate the logs more efficiently, you can set up log filters. The more information you specify in the filter, the easier it is to find the precise log entry. Filters are configurable for each column of log data in the display. By default, the most common columns are shown and less common columns are hidden. Accordingly, if filtering data based on a column that is hidden, be sure to add the column as a selected column. To add columns, right-click any column field and from the pop-up menu that appears, select the column from the Available Columns section. FortiGate I Student Guide 215 DO NOT REPRINT © FORTINET Logging and Monitoring There is also an option to apply a quick filter to logs. Right-click the column of a specific log message and select one of the filter options that appear (options differ based on log type and column). FortiGate also allows you to quickly quarantine the source address through the log viewer. Right-click the log and select Quarantine Source Address from the dialog box that appears. You can set the quarantine to Temporary or Permanent and subsequently manage the quarantine from the User Quarantine page. FortiGate I Student Guide 216 DO NOT REPRINT © FORTINET Logging and Monitoring You can also access log messages generated by individual policies. Right-click the policy for which you want to view all associated logs, and from the pop-up menu, select Show Matching Logs. FortiGate I Student Guide 217 DO NOT REPRINT © FORTINET Logging and Monitoring You can download raw (unformatted) logs by clicking the download icon on the associated log type page (for example, System Event logs). You can filter the logs first if you want to download only a subset of logs. You can also download debug logs from the Advanced page. Debug log messages are only generated if the log severity level is set to Debug. Customer Support may request debug logs to assist with troubleshooting. FortiGate I Student Guide 218 DO NOT REPRINT © FORTINET Logging and Monitoring There are three methods for exporting logs: FTP, TFTP, and USB. For USB, logs are exported as LZ4 compressed files. You can export to USB from both the CLI and GUI. When you insert a USB drive into the USB port of your FortiGate, the USB menu appears in the GUI. The menu displays the amount of storage available on the USB disk as well as the log file size. Click Copy to USB to copy the log file to the USB drive. From the CLI, use the execute backup disk alllogs usb command to back up all logs to USB. Or to back up just the traffic logs to USB, use the execute backup disk log usb command (where is traffic, event, virus, webfilter, and so on). FortiGate I Student Guide 219 DO NOT REPRINT © FORTINET Logging and Monitoring Monitoring your FortiGate is critical for incident response. If you are monitoring your network continuously, you may be able to stop an attack in progress, or, if a breach is successful, know where reinforcement is needed. How the attack occurs may reveal weaknesses in your configuration or give important clues about the attacker’s identity. There are many ways you can monitor your network. You can monitor through the Alert Message Console, the FortiView menu, the Monitor menu, alert email, and SNMP. FortiGate I Student Guide 220 DO NOT REPRINT © FORTINET Logging and Monitoring The Alert Message Console is a widget located on the dashboard of the GUI. You can configure the widget to display alerts according to your preferences by clicking the pencil icon. For example, you can configure which events you want to appear as alerts and the number of alerts displayed. These alerts are not logging related alerts, but system related alerts. When an alert appears in the Alert Message Console, it remains there until acknowledged. Once you investigate the issue (and make adjustments if necessary), you can remove it from the list. FortiGate I Student Guide 221 DO NOT REPRINT © FORTINET Logging and Monitoring FortiView is a comprehensive monitoring system for your network that integrates real-time and historical data into a single view on your FortiGate. It can log and monitor threats to networks, filter data on multiple levels, keep track of administrative activity, and more. Through the various pages under the FortiView menu, you can investigate traffic activity and employ multiple filters to narrow your view over a specific timeframe (local storage is required to view logs 24 hours in the past). Note that some FortiGate models support a 7-day time display. This can only be enabled through the CLI using the config log setting command. FortiGate I Student Guide 222 DO NOT REPRINT © FORTINET Logging and Monitoring Some of the areas you can monitor under the FortiView menu include: • • • • • • • • • Sources: Allows you to view information about the sources of traffic on your FortiGate. You can use this to investigate a spike in traffic, for example. Interfaces: Allows you to perform current and historical monitoring by interface, with the ability to monitor bandwidth, in particular. You can use this to investigate traffic spikes associated with an IP address, for example. Countries: Allows you to filter traffic according to source and destination countries. This includes the option to view the country map visualization. You can use this to investigate international source bandwidth usage for specific sources, for example. All Sessions: Allows you to view information about all FortiGate traffic. This console has the greatest number of column filter options. You can use this to filter sessions by port number and application type, for example. Applications: Allows you to view information about the applications being used on your network. Cloud Applications: Allows you to view information about the cloud-based applications being used on your network. Web Sites: Allows you to view information about the top allowed and top blocked websites by domain or FortiGuard categories. You can use this to investigate an instance of proxy avoidance, for example. Threats: Allows you to view information about the top users involved in incidences as well as the top threats in your network. Threat Map: Allows you to view risks coming from various international locations arriving at your location, displayed through a map. You can use this to investigate various international threats. FortiGate I Student Guide 223 DO NOT REPRINT © FORTINET Logging and Monitoring You can also monitor various monitoring functions from the Monitor menu, such as routing, DCHP, WAN link, FortiGuard quota, IPsec, SSL VPN, firewall users, user quarantine, FortiClient, WiFi, and rogue AP. For example, the Routing Monitor displays routing information that includes type, subtype, network, gateway, interface, and up time. FortiGate I Student Guide 224 DO NOT REPRINT © FORTINET Logging and Monitoring Since you can’t always be physically at the device, you can monitor events by setting up alert email. Alert emails provide an efficient and direct method of notifying an administrator of events. Before you can configure alert email, you must have a SMTP server set up on FortiGate. Once configured, the Alert E-Mail menu item appears. You can configure alert emails from the Alert E-Mail page. You can trigger alert emails based on type (such as any time an intrusion is detected or there is a firewall authentication failure) or on minimum log severity level (such as all logs at the Alert level or above). You can configure up to three recipients. FortiGate I Student Guide 225 DO NOT REPRINT © FORTINET Logging and Monitoring Simple Network Management Protocol (SNMP) enables you to monitor hardware on your network. You can configure the hardware, such as the FortiGate SNMP agent, to report system information and send traps (alarms or event messages) to SNMP managers. An SNMP manager, or host, is typically a computer running an application that can read the incoming trap and event messages from the agent and send out SNMP queries to the SNMP agents. In order to configure FortiGate for SNMP monitoring, your SNMP manager needs the Management Information Base (MIB) file. A MIB is a text file that describes a list of SNMP data objects and provides information the SNMP manager needs to interpret the SNMP traps and events sent by the FortiGate device SNMP agent. The FortiGate SNMP implementation is read-only. SNMP v1, v2c, and v3-compliant SNMP managers have read-only access to FortiGate system information through queries and can receive trap messages from FortiGate. You can download the MIB files from the System >SNMP page or from the Fortinet Technical Support Web site (support.fortinet.com). FortiGate I Student Guide 226 DO NOT REPRINT © FORTINET Logging and Monitoring Reports provide a clear, concise overview of what is happening on your network based on log data, without manually going through large amounts of logs. This section provides a brief overview of FortiGate reports. FortiGate I Student Guide 227 DO NOT REPRINT © FORTINET Logging and Monitoring The FortiGate database that is used to store logs is also used to extract information for reports. The log database uses Structured Query Language (SQL). Reports are built from datasets, which are SQL statements that tell FortiGate what information to extract from the database. FortiGate also includes two default reports: Learning report and Local report. FortiGate I Student Guide 228 DO NOT REPRINT © FORTINET Logging and Monitoring When learning mode is enabled on a firewall policy, data across all traffic and security vectors is captured and generated in the Cyber Threat Assessment Learning Report. The purpose of this report is to allow users to easily implement a monitor then enforce process. Data includes: • • • • Deployment methodology Executive summary Security and threat prevention, which includes high risk applications; application vulnerability exploits; malware, botnets, and spyware/adware; and at-risk devices and hosts User productivity, which includes application usage and web usage FortiGate I Student Guide 229 DO NOT REPRINT © FORTINET Logging and Monitoring To enable learning reports, you must enable disk logging and ensure Policy Learning is enabled on the Feature Select page. You must also set Action to LEARN in the firewall policy. Once enabled, the policy automatically applies default static profiles and passes traffic to security profiles for monitoring. It also enables logging with full capabilities, which are tagged as Learning in the logs. Learning reports are enabled per-VDOM. FortiGate I Student Guide 230 DO NOT REPRINT © FORTINET Logging and Monitoring You can select to view either the full report or report summary. They both provide the same data, but the full report provides supplementary text-based explanations of the various report categories. You can also specify the time period of the report. The report can provide data for the last 5 minutes, 1 hour, or 24 hours. FortiGate I Student Guide 231 DO NOT REPRINT © FORTINET Logging and Monitoring The FortiGate Security Report compiles security feature activity from various security-related logs, such as virus and attack logs. You can run the report on demand, or on a daily or weekly basis as well as choose to email the generated report. FortiGate I Student Guide 232 DO NOT REPRINT © FORTINET Logging and Monitoring FortiOS reports are configured from logs stored on the FortiGate hard drive. As such, you must enable disk logging on the Log Settings page. You must also enable local reports in order to view and edit reports. If you do not see Local Reports in the GUI menu, go to the Feature Select page and enable Local Reports. Local reports are enabled per-VDOM. FortiGate I Student Guide 233 DO NOT REPRINT © FORTINET Logging and Monitoring You can configure report options, run reports on demand, and view reports from the Local Reports page. Report options include specifying a schedule to run a report (for example, daily or weekly at a specific time of day), and specifying whether to email the generated reports. If you do not want to schedule reports, you can choose to generate on demand instead. You can run on demand reports even if scheduling is enabled by clicking Run Now. You can view all generated reports from the Historical Reports table. FortiGate I Student Guide 234 DO NOT REPRINT © FORTINET Logging and Monitoring After this lesson, you should have the knowledge and skills required to: • • • • • • • • • • • Describe log types and subtypes Describe log severity levels Describe log format (header and body) Identify log storage locations Configure log settings Configure remote logging Enable logging on firewall policies View, filter, download, and export logs Monitor your network Configure alert email Configure, run, and view reports FortiGate I Student Guide 235 DO NOT REPRINT © FORTINET Firewall Policies In this lesson, you will learn how to understand and apply the firewall policies to allow and deny traffic passing through FortiGate. At its core, FortiGate is a firewall, so almost everything that it does to your traffic is linked into your firewall policies. FortiGate I Student Guide 236 DO NOT REPRINT © FORTINET Firewall Policies After this lesson, you should be able to properly identify the different components used in a firewall policy. You’ll be able to configure and test your firewall policies, arrange them to correctly match traffic, and monitor traffic passing through them. FortiGate I Student Guide 237 DO NOT REPRINT © FORTINET Firewall Policies To begin, let’s talk about what firewall policies are. Firewall policies define which traffic matches, and what FortiGate will do if it does. Should the traffic be allowed? This is decided first based on simple criteria such as the source. Then, if the policy itself does not block the traffic, FortiGate begins more computationally expensive security profile inspection (often known as Unified Threat Management (UTM)), such as antivirus, application control, and web-filtering, if you’ve chosen it in the policy. Those scans could block the traffic if, for example, it contains a virus. Otherwise, the traffic is allowed. Will NAT be applied? Authentication required? Firewall policies also determine that. Once processing is finished, FortiGate forwards the packet towards its destination. FortiGate looks for the matching firewall policy from ‘top to bottom’ and, if a match is found, the traffic is processed based on that firewall policy. If no match is found, it is finally dropped by the default Implicit Deny policy. FortiGate I Student Guide 238 DO NOT REPRINT © FORTINET Firewall Policies Each policy matches traffic and applies security by referring to objects that you’ve defined, such as addresses and profiles. What about other firewall policy types? Do IPv6 or virtual wire policies exist? Yes. And they use slightly different objects that are relevant to their type. In this lesson, we are discussing IPv4 firewall policies as they are the most common use case. FortiGate I Student Guide 239 DO NOT REPRINT © FORTINET Firewall Policies Now we know what a firewall policy is. In this section, you will learn how FortiGate matches traffic with the firewall policies and takes appropriate action based on the matching policy. FortiGate I Student Guide 240 DO NOT REPRINT © FORTINET Firewall Policies When a packet arrives, how does FortiGate find a matching policy? Each policy has match criteria, which you can define using the following objects: • • • • • Ingress and egress Source and destination: IP address, device ID, or user Network service(s): IP protocol and port number Schedule: applies during configured times Action : accept or deny Once FortiGate finds a matching policy, it applies the configured settings for packet processing. Is antivirus scanning or web filtering applied? Will source NAT be applied? For example, if you want to block incoming FTP to all but a few FTP servers, you would define the addresses of your FTP servers, select those as the destination, and select FTP as the service. You probably wouldn’t specify a source (often any location on the Internet is allowed) or schedule (usually FTP servers are always available, day or night). Finally, you would set the Action setting to Accept. This might be enough, but often you’ll want more thorough security. Here, the policy also authenticates the user, scans for viruses, and logs blocked connection attempts. FortiGate I Student Guide 241 DO NOT REPRINT © FORTINET Firewall Policies To begin describing how FortiGate finds a policy for each packet, let’s start with the interface(s). Packets arrive on an incoming, or ingress, interface. Routing determines the outgoing, or egress, interface. In each policy, you must set a source and destination interface; even if one or both are set to any. Both interfaces must match the policy’s interface criteria in order to be a successful match. For example, if you configure policies between port3 (LAN) ingress and port1 (WAN) egress and a packet arrives on port2, the packet would not match your policies and therefore be dropped due to the implicit deny policy at the end of the list. Even if the policy is from port3 (LAN) ingress to any egress, the packet would still be dropped because it did not match the incoming interface. To simplify policy configuration, you can group interfaces into logical zones. For example, you could group port4 to port7 as a DMZ zone. Zones can be created from the Interfaces page. However, you should note that an interface in a zone cannot be referenced individually, and if you need to remove the interface from the zone, you must remove all references to that interface (for example, firewall policies, firewall addresses, and so on). If you think that you might need to reference interfaces individually, you should set multiple source and destination interfaces in the firewall policy, instead of using zones. FortiGate I Student Guide 242 DO NOT REPRINT © FORTINET Firewall Policies By default, you can only select a single interface as the incoming interface and a single interface as the outgoing interface. This is because the option to select multiple interfaces, or any interface in a firewall policy, is disabled from the GUI. However, you can enable the Multiple Interface Policies under the Feature Select page to disable the single interface restriction. You can also select multiple interfaces, or any interface, if you configure a firewall policy from the CLI, regardless of the default GUI setting. It is also worth mentioning that when any interface is chosen, you cannot select multiple interfaces for that interface. In this example, because any is selected as the outgoing interface, you cannot add any additional interfaces. FortiGate I Student Guide 243 DO NOT REPRINT © FORTINET Firewall Policies The next match criteria that FortiGate considers is the packet’s source. In each firewall policy, you must select a source address object. Optionally, you can refine your definition of the source address by also selecting a user, a group, or a specific device. If your organization allows BYOD (Bring Your Own Device), than a combination of all three provides a much more granular match, for increased security. Note: In FortiOS 5.4, you can allow the subnet (IP/Netmask) to be visible in a static route configuration, which can be used when configuring a static route. When selecting a fully qualified domain name (FQDN) as the source address, it must be resolved by DNS and cached in FortiGate. Make sure FortiGate is configured properly for DNS settings. If FortiGate is not able to resolve a FQDN address, it will present with a warning message and a firewall policy containing a FQDN may not function properly. FortiGate I Student Guide 244 DO NOT REPRINT © FORTINET Firewall Policies If a user is added as part of the source, it must be verified before allowing or denying access based on the firewall policy. There are different ways a user can be authenticated. For a local user, the username and password is configured locally on FortiGate. When a local user authenticates, it must match the username and password configured on the FortiGate locally. If it is a remote user (for example, LDAP or RADIUS), FortiGate receives the username and password from the remote user and passes this information to the authentication server. The authentication server verifies the user login credentials and updates FortiGate. Once FortiGate receives that information, access to the network is granted based on the firewall policy. A Fortinet Single Sign-On (FSSO) user authenticates by logging in with their username and password that is configured on the domain controller and access is granted based on the group information on FortiGate. FortiGate I Student Guide 245 DO NOT REPRINT © FORTINET Firewall Policies There are two device identification techniques: with an agent, and without. Agentless uses traffic from the device. Devices are indexed by their MAC address and there are various ways to identify devices: • • • • • • • • HTTP “User-Agent:” header TCP fingerprint MAC address OUI DHCP (option 60 class identifier, option 12 host_name) Microsoft Windows browser service (MWBS) SIP user agent Link Layer Discovery Protocol (LLDP) Simple Service Discovery Protocol (SSDP) Note: FortiGate uses “first come, first served” to determine the device identity. For example, if a device is detected by the HTTP user agent, FortiGate updates its device table with the detected MAC address and scanning stops as soon as the type has been determined for that MAC address. Agent-based uses FortiClient. FortiClient sends information to FortiGate, and the device is tracked by its unique FortiClient UID. FortiGate I Student Guide 246 DO NOT REPRINT © FORTINET Firewall Policies If you enable Source Device Type in the firewall policy, FortiGate enables Device Detection and Active Scanning on the source interface(s) of the policy. By default, FortiGate uses Device Detection (passive scanning) which runs the scans based on the arrival of traffic. What is active scanning? If passive detection fails to detect the device type for over five minutes, active scanning is triggered and scans every three minutes. If active scanning fails to detect the device type, the next scan occurs 10 minutes later. If that scan fails, the next occurs 15 minutes later. FortiGate uses an (N+1)*5 minutes algorithm for scanning, where N is the number of scans that have been done. Active scanning scans for device type, OS, and OS version. FortiGate I Student Guide 247 DO NOT REPRINT © FORTINET Firewall Policies The Device List shows the list of detected devices. It also shows the total number of devices detected. You can right-click on any detected device to edit, delete, or view details in FortiView. The details include session, destination, policies, and more. You can also define static entries for device and/or device groups. By default, devices are grouped into Custom Device Groups; however, if a predefined device group doesn’t match your organizational needs, you can create a custom group. Devices are indexed by MAC and identified from multiple sources. The CLI command diagnose user device list shows a more detailed listing than the Device Inventory page, including the detection method. In this worked example, devices are detected by source as TCP fingerprinting, HTTP user agent, and FortiClient. Detected devices are saved to FortiGate’s flash drive. Therefore, on restart, FortiGate knows that devices have already been identified, and does not have to re-categorize each device. The user displayed in the device information is just a tag; it cannot be used as a means of identification for an authentication policy. FortiGate I Student Guide 248 DO NOT REPRINT © FORTINET Firewall Policies FortiGate can control FortiClient settings through the FortiClient profile and registration. In order for FortiClient to register with FortiGate, FortiTelemetry must be enabled on the applicable interface. There are other configuration settings worth mentioning, such as Enforce FortiTelemetry for all FortiClients. If enabled, non-complaint devices are blocked and redirected to a web portal that explains the non-compliance and provides a link to download FortiClient. You can exempt devices from FortiClient enforcement using source and/or destination or services. Once FortiClient is registered, it is added into the device list. FortiGate also pushes the FortiClient profile to the registered FortiClient(s). You may configure the default FortiClient profile or add additional profiles. You can also view the FortiClient endpoint information from the FortiClient Monitor page. You can run diagnose user device list or diagnose endpoint registration list to view the FortiClient unique UID. FortiClient devices have a unique id which can be used as an index for the device. The unique id is used instead of the MAC address, because using MAC addresses can be problematic when a device has multiple MAC addresses (such as servers or virtual machines), or when there is no Layer 2 visibility of the device. The License Information widget on the FortiGate GUI dashboard shows the total number of registered devices and the total number of devices available for registration. Windows and Mac OS X FortiClient installers are also available from this dashboard widget. FortiGate I Student Guide 249 DO NOT REPRINT © FORTINET Firewall Policies FortiClient is the agent-based approach for source device type. As shown in the previous slide, FortiClient enforcement is enabled on the interface(s). Firewall policies with this source interface will force the user to download or register FortiClient with FortiGate. In FortiOS 5.2, FortiClient enforcement was enabled on a policy-by-policy basis. FortiGate I Student Guide 250 DO NOT REPRINT © FORTINET Firewall Policies Here, all three source selectors identify the user group, device type, and specific subnet. Remember, user and device are optional objects. They are used here to make the policy more specific. If you wanted the policy to match more traffic, you would leave the user and device objects undefined. FortiGate I Student Guide 251 DO NOT REPRINT © FORTINET Firewall Policies Like the packet’s source, FortiGate also checks the destination address for a match. Address objects may be a host name, IP subnet, or range. If you enter a FQDN as the address object, make sure that you’ve configured your FortiGate with DNS settings. FortiGate uses DNS to resolve those FQDN host names to IP addresses, which are what actually appear in the IP header. Geographic addresses, which are groups or ranges of addresses allocated to a country, can be selected instead. These objects are updated via FortiGuard. Why is there is no option to select user or devices? The user identification or device identification is determined at the ingress interface, and packets are forwarded only to the egress interface once user or device authentication is successful. FortiGate I Student Guide 252 DO NOT REPRINT © FORTINET Firewall Policies Schedules add a time element to the policy. For example, a policy allowing backup software may activate at night, or a remote address may be allowed for testing purposes, and a schedule provides a test window. Schedules can be configured from the Schedules page and use a 24-hour time clock. There are a few configuration settings worth mentioning: Recurring: When configuring recurring schedules, if the stop time is set earlier than the start time, the stop time will occur the next day. For example, if you select Sunday as the day, 10:00 as the start time, and 09:00 as the stop time, the schedule will stop on Monday at 09:00. If the start and stop time are identical, the schedule will run for 24 hours. One-time: The start date and time must be earlier than stop date and time. You can also enable Preexpiration event log, which will generate an event log N number of days before the schedule expires, where N can be from 1 to 100 days. FortiGate I Student Guide 253 DO NOT REPRINT © FORTINET Firewall Policies Another criterion that FortiGate uses to match policies is the packet’s service. At the IP layer, protocol numbers (for example, TCP, UDP, SCTP, and so on) together with source and destination ports, define each network service. Generally, only a destination port (that is, the server’s listening port) is defined. Some legacy applications may use a specific source port, but in most modern applications, the source port is randomly determined at transmission time, and therefore is not a reliable way to define the service. For example, the predefined service object named HTTP is TCP destination port 80 and the predefined service object named HTTPS is TCP destination port 443. However, the source ports are ephemeral and, therefore, not defined. By default, services are grouped together to simplify administration, so you can view the services By Category or Alphabetically. If the predefined services doesn’t meet your organizational needs, you can create one or more new services, service groups, and categories. FortiGate I Student Guide 254 DO NOT REPRINT © FORTINET Firewall Policies So far we have learned about firewall policies matching criteria and the action that FortiGate can take. In this section, you will learn how to configure firewall policies. FortiGate I Student Guide 255 DO NOT REPRINT © FORTINET Firewall Policies When you configure a new firewall policy from the GUI, you must specify a unique name for the firewall policy because it is enabled by default (but optional in the CLI). This helps the administrator to quickly identify the policy that they are looking for. However, you can make this feature optional in GUI from the Feature Select page by enabling Allow Unnamed Policies under Additional Features. Note: When upgrading from a previous FortiGate firmware version (for example, 5.2) or a policy configured from the CLI, no policy names are assigned. However, if you modify an existing policy from the GUI, you must specify a unique name. The FortiGate flat GUI view allows you to select interfaces and other objects by clicking or dragging and dropping on the list populated on the right-hand side. There are many other options that you can configure from the firewall policy, such as firewall and network options, security profiles, logging options, and enabling or disabling a policy. When creating firewall objects or policies, a Universally Unique Identified (UUID) attribute is added so that logs can record these UUID and improve functionality when integrating with FortiManager or FortiAnalyzer. When creating firewall policies, remember that FortiGate is a stateful firewall. As a result, you only need to create one firewall policy that matches the direction of the traffic that initiates the session. FortiGate will automatically remember the source-destination pair and allow replies. FortiGate I Student Guide 256 DO NOT REPRINT © FORTINET Firewall Policies One of the most important features that a firewall policy can apply is security profiles, such as IPS and antivirus. A security profile inspects each packet in the traffic flow, where the session has already been conditionally accepted by the firewall policy. When inspecting traffic, FortiGate can use one of two methods: flow-based or proxy-based. Different security features are supported by each type. FortiGate I Student Guide 257 DO NOT REPRINT © FORTINET Firewall Policies You can also enable learning mode on a firewall policy. When you set Action to LEARN, the firewall policy automatically applies default static profiles and passes traffic to security profiles for monitoring. It also enables logging with full capabilities, which are tagged as Learning in the logs. You can view the comprehensive report that results from learning mode under the Learning Reports page. This report uses all of the learning logs, across all traffic and security vectors, to generate a complete summary report. This enables users to easily implement a monitor then enforce process. FortiGate I Student Guide 258 DO NOT REPRINT © FORTINET Firewall Policies If you enable Generate Logs when Session Starts, FortiGate will create a traffic log when the session begins. But remember that increasing logging decreases performance, so use it only where necessary. If you have enabled logging in the policy, FortiGate will generate traffic logs once a firewall policy closes an IP session. During the session, if a security profile detects a violation, FortiGate will record the attack log immediately. To reduce the amount of log messages generated and improve performance, you can enable a session table entry of dropped traffic. This creates the denied session in the session table and, if the session is denied, all packets of that session are also denied. This option is in the CLI, and is called ses-denied-traffic. You can also set the duration for block sessions. This determines how long a session will be kept in the session table by setting block-session-timer in the CLI. By default, it is set to 30 seconds. If the GUI option Generate Logs when Session Starts is not displayed, this means that your FortiGate device does not have internal storage. This option is in the CLI, regardless of internal storage, and is called set logtraffic-start enable. FortiGate I Student Guide 259 DO NOT REPRINT © FORTINET Firewall Policies Two types of traffic shapers can be configured: shared and per-IP. A shared shaper applies a total bandwidth to all traffic using that shaper. The scope can be per-policy or for all policies referencing that shaper. FortiGate can count the packet rates of ingress and egress to police traffic. In FortiOS 5.4, traffic shaping policies are created separately on the Traffic Shaping Policy page. FortiGate allows you to create three types of traffic shaping policies: • • • Shared policy shaping: Bandwidth management of security policies Per-IP shaping: Bandwidth management of user IP addresses Application control shaping: Bandwidth management by application When creating traffic shaping policies, you must ensure that the Matching Criteria is the same as the firewall policies you want to apply shaping to. Note that these apply equally to TCP and UDP, and UDP protocols may not recover as gracefully from packet loss. FortiGate I Student Guide 260 DO NOT REPRINT © FORTINET Firewall Policies So far you have learned how to configure firewall policies. In this section, you will learn how to manage and fine-tune settings for firewall policies. FortiGate I Student Guide 261 DO NOT REPRINT © FORTINET Firewall Policies Firewall policies appear in an organized list. It’s either organized in Interface Pair View, or By Sequence. Usually, it will appear in Interface Pair View. Each section contains policies for that ingress-egress pair. Alternatively, you can view your policies as a single, comprehensive list by selecting By Sequence at the top of the page. In some cases, you won’t have a choice of which view is used. If you use multiple source and destination interfaces or the any interface in a firewall policy, policies cannot be separated into sections by interface pairs – some would be triplets or more. So instead, policies are then always displayed in a single list (By Sequence). To help you remember the use of each interface, you can give them aliases. For example, you could call port3 Internal_network. This can help to make your list of policies easier to comprehend. FortiGate I Student Guide 262 DO NOT REPRINT © FORTINET Firewall Policies Firewall policies in the GUI are ordered primarily by the policy sequence number. Policy sequence numbers define the order in which rules are processed. Policy IDs are identifiers. By default, sequence numbers are displayed on the GUI. CLI commands, however, use policy ID. Be careful not to accidentally modify the wrong policy. To avoid such errors, you can add the policy ID to the GUI using the column settings. Remember that we mentioned that only the first matching policy applies? Moving your policies into the correct position is important. It affects which traffic is blocked or allowed. In the applicable interface pair’s section, FortiGate will look for a matching policy, beginning at the top. So usually you should put more specific policies at the top; otherwise, more general policies will match the traffic first, and your more granular policies will never be applied. Here, we’re moving a policy (sequence number 3, ID 8) that only matches syslog traffic above a more general Full_Access (accept everything from everywhere) policy. Otherwise, FortiGate would always apply the first matching policy – Full_Access– and never reach the Block_Syslog policy. Notice that after moving this policy up, the sequence number changed from 3 to 2, but the policy ID 8 remained the same in the GUI. As the CLI only uses policy ID, before moving, policy ID 7 was on top, and after the move, policy ID 8 is on the top. As a best practice, always add the policy ID column in the GUI. While sequence number changes when a policy is moved, the value that remains with a policy is the policy ID. FortiGate I Student Guide 263 DO NOT REPRINT © FORTINET Firewall Policies To reduce the total number of firewall policies in RAM and to simplify administration, you can group service and address objects. Then you can reference that group in the firewall policy, instead of selecting multiple objects each time or making multiple policies. Here, we see four services that match the policy: HTTP, HTTPS, FTP, and DNS. DNS is usually used by HTTP, as people remember domain names for web sites instead of their IP addresses. If you need to make many policies for web and FTP traffic, then it makes sense to create a service object named Web-FTP. That way, you don’t have to manually select all four services each time you make a policy. Policies can reference the Web-FTP service group instead. Also, if you notice, you can consolidate these two firewall policies, as they have the same source and destination, except the services are different. You can consolidate source address as source group and create a service group containing all the services for web, FTP, and email access. When consolidating two firewall policies, the other settings in the firewall policy, such as logging and security profiles, should match. FortiGate I Student Guide 264 DO NOT REPRINT © FORTINET Firewall Policies We’ve just shown several component objects that can be re-used as you make policies. What if you want to delete an object? If it’s being used, you can’t. First, you must reconfigure the objects that are currently using it. The GUI provides a simple way to find out where in the FortiGate’s configuration an object is being referenced. See the numbers in the Ref. column? They are the number of places where that object is being used. The number is actually a link, so if you click it, you can see which objects use it. In this example, address all is being used by an address group and two firewall policies. If you select a firewall policy, you can use the Edit, View List, and View Properties tabs. • • • Edit: It allows you to edit the selected object. In this example, it shows the edit page for the firewall policy ID 3. View List: It allows you to view selected objects in its category. In this example, it will show you the list of all the firewall policies. View Properties: It shows where the object is used in that configuration. In this example, address object all is being used in the destination address and source address of that firewall policy. FortiGate I Student Guide 265 DO NOT REPRINT © FORTINET Firewall Policies You can right-click any firewall policy sequence to see different menu options to edit or modify the policy. The options include enabling or disabling a firewall policy, inserting firewall policies (above or below), copying and pasting policies, and cloning reverse (only if NAT is disabled on that policy). Clicking Edit in CLI opens the CLI console for the firewall policy or object selected. Right-clicking the objects provides you with options to add or remove an object of the same type, modify an object, and show a reference for that object. FortiGate I Student Guide 266 DO NOT REPRINT © FORTINET Firewall Policies So far, we have learned about managing firewall policies. In this section, you will learn how to monitor and find matching firewall policies using the policy lookup feature. FortiGate I Student Guide 267 DO NOT REPRINT © FORTINET Firewall Policies In FortiOS 5.4, you can find a matching firewall policy based on the policy lookup input criteria. It is basically creating packet flow over FortiGate without real traffic, from which it can extract a policy ID from flow trace and highlight it on the GUI policy configuration page. Depending upon the protocol you select (for example, TCP, UDP, IP, ICMP, and so on), you need to define other input criteria. For example, when you select TCP as the protocol, you need to define the source address, source port (optional), destination port, and destination address. When you select ICMP as the protocol, you need to define the ICMP type/code, source address, and destination address. When FortiGate is performing policy lookup, it performs a series of checks on ingress, stateful inspection, and egress, for the matching firewall policy from top to bottom before providing results for the matching policy. Note: If the firewall policy status is set to disable, the policy lookup skips the disabled policy and checks for the next matching policy in the list. FortiGate I Student Guide 268 DO NOT REPRINT © FORTINET Firewall Policies Based on the input criteria, after clicking Search, the trace result will be selected, and highlighted, on the IPv4 Policy page. FortiGate I Student Guide 269 DO NOT REPRINT © FORTINET Firewall Policies To review, here’s all the topics we covered in this lesson: • • • • • How packets match a firewall policy How FortiGate defines matching traffic Configuring firewall policies Reordering policies to match more granular policies first Using policy lookup to find matching policies FortiGate I Student Guide 270 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this lesson, you will learn how Network Address Translation (NAT) is configured and used to do source NAT and destination NAT for the traffic passing through FortiGate. FortiGate I Student Guide 271 DO NOT REPRINT © FORTINET Network Address Translation (NAT) After completing this lesson, you should have these practical skills that you can use to configure and implement source NAT and destination NAT for traffic passing through the FortiGate. This includes: • • • • • Choosing between firewall policy NAT and central NAT Configuring firewall policy source NAT and destination NAT (Virtual IP) Configuring central NAT Using a SIP session helper for VoIP Understanding the session table on FortiGate FortiGate I Student Guide 272 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In addition to security scans, firewall policies also determine what network address translation (NAT) or port address translation (PAT) to apply to each packet. NAT and PAT, also known as NAPT, translate internal, typically private, IP addresses to external, typically public or Internet, IP addresses. In FortiOS, NAT and traffic forwarding applies to the same firewall policy. However, diagnostics clearly show NAT and forwarding as separate actions. • • The NAT option in a firewall policy, and IP pools, are source NAT. Virtual IPs are destination NAT. FortiGate I Student Guide 273 DO NOT REPRINT © FORTINET Network Address Translation (NAT) When you use firewall policy NAT mode, you must configure SNAT and DNAT for each firewall policy. Central NAT configurations are per virtual domain (discussed later in the training), which means SNAT and DNAT configurations automatically applies to multiple firewall policies, according to the SNAT and DNAT rules that you specify, as opposed to each firewall policy in firewall policy NAT. As a best practice, when you use central NAT, you should make sure to configure specific SNAT and DNAT rules so that it will match only desired firewall policies in your configuration. Both firewall policy NAT and central NAT produce the same results. An example would be a small branch office, where you have fewer firewall policies. In this case, you can use firewall policy NAT. In the case of a managed service provider, central NAT can be used to do SNAT and DNAT for a virtual domain containing a large number of firewall policies. You only have to configure central SNAT and DNAT rules once, and they can be applied to multiple firewall policies. FortiGate I Student Guide 274 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this section, you will learn how to configure firewall policy NAT to perform source NAT and destination NAT, and how it is applied to the traffic traversing through FortiGate. FortiGate I Student Guide 275 DO NOT REPRINT © FORTINET Network Address Translation (NAT) The source NAT option uses the egress interface address when NAT is enabled on the firewall policy. This is a many-to-one NAT. In other words, port address translation (PAT) is used and connections are tracked using the original source address and source port combinations as well as the allocated source port. This is the same behavior as the overload IP pool type, discussed later. Optionally, you may select a fixed port, in which case the source port translation is disabled. With fixed port, if two or more connections require the same source port for a single IP address, only one connection can establish. In this example, a firewall policy from internal to wan1 (IP address 172.20.20.200) is created, and the user initiates traffic from source 10.10.10.10:1025 destined for 192.168.10.10:80. As NAT is enabled on the firewall policy, the source IP address is translated to egress interface IP with port translation. FortiGate I Student Guide 276 DO NOT REPRINT © FORTINET Network Address Translation (NAT) If you use an IP pool, the source address is translated to an address from that pool, rather than the egress interface address. The larger the number of addresses in the pool, the greater the number of connections that can be supported. The default IP pool type is overload. In IP pool type overload, a many-to-one or few relationship and port translation is used. In this example, source IP 10.10.10.10 will be translated to an IP address from the IP pool (172.20.20.2 – 172.20.20.10). FortiGate I Student Guide 277 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In the one-to-one pool type, an internal IP address is mapped with an external address on a firstcome, first-served basis. There is a single mapping of an internal address to an external address. Mappings are not fixed and if there are no more addresses available, a connection will be refused. Also, in one-to-one, port address translation is not required. In the example, you can see the same source port is shown for both the ingress and egress address. FortiGate I Student Guide 278 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In the fixed port range pool type, it provides an explicit relationship between internal IP address ranges and external IP address ranges, and disables port address translation. It allows fixed mapping of internal start IP / internal end IP range to external start IP / external end IP range. This example uses a fixed port range IP pool. The internal address range 10.0.1.10-10.0.1.11 maps to the external address range 10.200.1.710.200.1.8. FortiGate I Student Guide 279 DO NOT REPRINT © FORTINET Network Address Translation (NAT) These two CLI outputs illustrate the behavior difference between the port block allocation type and the default overload type. Using hping, a rogue client generates many SYN packets per second. In the first example, the port block allocation type limits the client to 64 connections for that IP pool. Other users will not be impacted by the rogue client. In the second example, the overload type imposes no limits, and the rogue client uses many more connections in the session table. Other users will now be impacted. FortiGate I Student Guide 280 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Virtual IPs (VIPs) are destination NAT objects. For sessions matching a VIP, the destination address is translated: usually a public Internet address is translated to a server’s private network address. VIPs are selected in the firewall policy’s Destination Address field. The default VIP type is static NAT. This is a one-to-one mapping, which applies for incoming and outgoing connections. That is, an outgoing policy with NAT enabled would use the VIP address instead of the egress interface address. This behavior, however, can be overridden by use of an IP pool. The static NAT VIP can be restricted to forward only certain ports. For example, connections to the external IP on port 8080 map to the internal IP on port 80. From the CLI, you can select as the NAT type load-balance and server-load-balance. Plain load balancing distributes connections from an external IP address to multiple internal addresses. The later builds on that mechanism, using a virtual server and real servers, and provides session persistence and server availability check mechanisms. VIPs should be routable to the external facing (ingress) interface. FortiOS responds to ARP requests for VIP and IP pool objects. ARP responses are configurable. FortiGate I Student Guide 281 DO NOT REPRINT © FORTINET Network Address Translation (NAT) (slide contains animation) In this example, source IP address 192.168.10.10 is trying to access destination IP address 172.20.20.222 over port TCP 80. (click) Connections to the VIP 172.20.20.222 are NATed to the internal host 10.10.10.10. Because this is static NAT, all NATed outgoing connections from 10.10.10.10 will use the VIP address in the packet’s destination field, not the egress interface’s address. FortiGate I Student Guide 282 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In FortiOS 5.2 and 5.4, traffic is permitted to fall through to the next policy; however, when you use VIP firewall policies, there can be some exceptions. When VIP(s) are configured, for incoming (WAN to LAN) connections, it will be first matched against the VIP table. In this worked example, a firewall policy from WAN to LAN is configured with a specific source and the action is deny. There is second firewall policy that is allowing access to VIP (the destination address). Even though the deny firewall policy is at the top of the list, the denied source is still allowed by the second firewall policy to access VIP. In order to block traffic from the denied source, you must enable set match-vip enable in the deny firewall policy, which skips the VIP id checking. Alternatively, you can configure the destination address as the virtual IP in the deny policy instead of all. FortiGate I Student Guide 283 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this section, you will learn how to configure central NAT to perform source NAT and destination NAT. Central SNAT and DNAT (VIP) is another method of defining source and destination NAT. This allows network address translation with more granularity in terms of controlling IP address, protocol, and port translation. FortiGate I Student Guide 284 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Prior to FortiGate firmware version 5.4, central NAT could only be configured for source NAT. In FortiGate firmware version 5.4, it allows you to configure both – central SNAT and DNAT (VIP). By default, central NAT is disabled and can only be enabled from the CLI. Once central NAT is enabled, you can configure these two options from the GUI: Central SNAT: Source network address translation DNAT & Virtual IPs: Destination network address translation What happens if you try to enable central NAT, but there are still IP pool or VIPs configured in firewall policies? The CLI will not allow this and will present with a message referencing firewall policy ID with Virtual IP or IP pool. You must remove Virtual IP or IP pool references from existing firewall policies in order to enable central NAT. Also, it’s worth mentioning that if central NAT is enabled in FortiGate firmware 5.2, the central-nat table under system settings does not convert if you try to upgrade to FortiGate firmware 5.4. This causes firewall policies with central NAT to use the outgoing interface IP address. You must reconfigure the central SNAT policy after upgrading the FortiGate firmware to 5.4. FortiGate I Student Guide 285 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Starting in FortiGate 5.4, a central SNAT policy is applied to a virtual domain (VDOM), and not to a specific firewall policy. The NAT on the firewall policy controls whether the central SNAT is used or not. If NAT is enabled on a firewall policy, central SNAT is used. (VDOM be discussed later in the training.) If the central SNAT policy criteria matches with the traffic based on multiple firewall policies, the central SNAT policy will be applied to those firewall policies as long as NAT is enabled on those firewall policies. What happens if NAT is enabled on a firewall policy when there is no matching central SNAT policy or no central SNAT policy configured? In this case, if no matching central SNAT rule exists, then FortiGate will automatically use the outgoing interface IP address for the source NAT. Similar to firewall policies, a central SNAT policy is processed from top to bottom and if a match is found, source address and source port are translated based on that central SNAT policy. You can have more granular control over traffic passing through firewall policies by defining matching criteria in the central SNAT policy, based on: • • • • Source address Destination address Protocol Source port FortiGate I Student Guide 286 DO NOT REPRINT © FORTINET Network Address Translation (NAT) (slide contains animation) In this example, the central SNAT policy translates the source IP address to the defined IP pool address (172.20.20.10). However, the translation takes place only if the traffic matches all the variables defined in the central SNAT policy, that is, traffic from the source IP address must be destined for destination IP address (192.168.10.10) and TCP protocol. For illustration purposes, only a single IP address is used for the destination, and the IP pool type is set to overload with a single IP address. (click) The firewall policy is created from internal to wan1 with NAT enabled. Remember that the NAT option on the firewall policy controls whether or not a central SNAT policy is used. (click) If the user tries any TCP-based sessions (for example http, https) to destination IP address 192.168.10.10, the source IP address will be translated to an IP pool address(s) defined in the central NAT policy. What if the user tries to send any ICMP or UDP-based traffic to 192.168.10.10? Will the source address be translated to the IP pool defined in the central NAT policy? (click) As the central SNAT policy does not match, FortiGate will automatically use the outgoing interface IP address (wan1) for the source NAT. What if the user tries TCP-based traffic to another destination IP address, 192.168.10.20? Will the source address be translated to the IP pool defined in the central NAT policy? (click) Again, the destination IP address of 192.168.10.20 does not match with the central NAT policy, so FortiGate will use the outgoing interface IP address (wan1) for the source NAT. FortiGate I Student Guide 287 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Traditionally in FortiGate, Virtual IPs are selected in the firewall policy as destination address. Starting in FortiGate 5.4 firmware, you can configure DNAT & Virtual IPs for destination NAT, which is also per VDOM. As soon as VIP is configured, FortiGate automatically creates a rule in the kernel to allow destination NAT to occur and no additional configuration is required. Do you lose the granularity of being able to define a firewall policy for a specific VIP and services? No, you don’t, assuming you have several wan to internal policies, and multiple VIPs, and you want to allow services for some VIPs and other services for other VIPs. You can define each firewall policy with the destination address of the mapped IP of the VIP, and select the appropriate services to allow or deny. Note that if both central SNAT and central DNAT (VIP) are configured, the outgoing (internal to wan) traffic will source NAT to the DNAT/VIP address, based on the central SNAT and DNAT (VIP) configurations. FortiGate I Student Guide 288 DO NOT REPRINT © FORTINET Network Address Translation (NAT) (slide contains animation) In this example, a DNAT & Virtual IPs rule is created to map external IP address 172.20.20.222 to internal IP address 10.10.10.10. Remember, as soon as a Virtual IP is created, a rule is created in the kernel to allow DNAT to occur. (click) Firewall policy from wan1 to internal is created with the destination address all or Mapped IP Address/Range (10.10.10.10) of the VIP. (click) Source IP address 192.168.10.10 is trying to access destination IP address 172.20.20.222 over port TCP 80. Connections to the VIP 172.20.20.222 are NATed to the internal host 10.10.10.10, without any additional configuration. FortiGate I Student Guide 289 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Central NAT can be disabled from the CLI by running set central-nat disable under the config system setting. What happens to firewall policies that are using central SNAT and DNAT rules, if central NAT is disabled? The incoming to outgoing firewall policies may still work using the egress interface IP address. However, the incoming to outgoing firewall policies will not use the IP pool addresses, which were previously tied to the central SNAT policy. If you need to use the IP pool, you need to edit the firewall policy to use IP pool. Egress-to-ingress firewall policies that use DNAT & Virtual IP, will stop working because, in central NAT, the destination address in the firewall policy is simply an address object, not an actual VIP. Without the central-nat hook into the DNAT table, the address object will cause a forward policy check failure – the traffic will be denied by policy ID 0. You need to edit the egress-to-ingress firewall policies and select VIP as the destination address. FortiGate I Student Guide 290 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this section, you will learn how session helpers are used to analyse data in the packets of some protocols and how to allow those protocols to pass traffic through FortiGate. FortiGate I Student Guide 291 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Some application layer protocols are not fully independent of the lower layers, such as the network or transport layer. The addresses may be repeated in the application layer, for example. If the session helper detects such a pattern, it may change the application headers or create required secondary connections. A good example is where an application has both a control and a data or media channel, such as with FTP. Firewalls will typically allow the control channel and rely on the session helpers to handle the dynamic data or media transmission connections. When more advanced application tracking and control is required, an Application Layer Gateway (ALG) can be used. The VoIP profile is an example of an ALG. FortiGate I Student Guide 292 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this example, the media recipient address in the SIP SDP payload is modified to reflect the NATed IP address. (click) Notice how, because firewall policies are stateful, a pinhole is opened to allow reply traffic, (click) even though you have not explicitly created a firewall policy to allow incoming traffic. This concept is used with some other protocols too, such as NAT-T for IPsec. FortiGate I Student Guide 293 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this section, you will learn how a session table keeps track of the session information, which can be helpful to understand the actions applied to the traffic, such as source NAT, destination NAT, and routing, for example. FortiGate I Student Guide 294 DO NOT REPRINT © FORTINET Network Address Translation (NAT) You can view the All Sessions page from the GUI, but the CLI provides more information regarding sessions in the session table. Firewall performance of connections per session and maximum number of connections are indicated by the session table. But keep in mind that if your FortiGate contains FortiASIC NP chips designed to accelerate processing without loading the CPU, this may not be completely accurate. The session table reflects what is known to, and processed by, the CPU. FortiGate I Student Guide 295 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Each session on the FortiGate can idle for a finite time, which is defined by time to live (TTL). Once the FortiGate detects the session is idle after some time of inactivity and TTL is reached, the session is deleted from the session table. Since the session table has a finite amount of RAM that it can use on your FortiGate, adjusting the session TTL can improve performance. There are global default timers, session state timers, and timers configurable in firewall objects. FortiGate I Student Guide 296 DO NOT REPRINT © FORTINET Network Address Translation (NAT) The diagnose sys session command tree provides many options to filter, clear, or show the list of sessions. You can also list brief information about sessions by running the get system session list CLI command. Before looking at the session table, first build a filter. To look at our test connection, you can filter on dst 10.200.1.254 and dport 80. FortiGate I Student Guide 297 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In this example, you can see the session TTL, which reflects how long FortiGate can receive no packets until it will remove the session from its table. Here you can see the routing and NAT actions that apply to the traffic. The firewall policy ID is also tracked. The proto_state for TCP is taken from its state machine, which we’ll talk about next. FortiGate I Student Guide 298 DO NOT REPRINT © FORTINET Network Address Translation (NAT) In the previous slide, remember that the session table contained a number that indicated the connection’s current TCP state. These are the states of the TCP state machine. They are single digit values, but proto_state is always shown as two digits. This is because FortiGate is a stateful firewall and keeps track of the original direction (client-side state) and the reply direction (server-side state). If there are too many connections in the SYN state for long periods of time, this indicates a SYN flood, which you can mitigate with DoS policies. This table and flow graph correlate the second digit value with the different TCP session states. For example, when the FortiGate receives the SYN packet, the second digit is 2. It goes to 3 once the SYN/ACK is received. After the three-way handshake, the state value changes to 1. When a session is closed by both sides, FortiGate keeps it in the session table for a few seconds more, to allow any out-of-order packets that could arrive after the FIN/ACK packet. This is the state value 5. FortiGate I Student Guide 299 DO NOT REPRINT © FORTINET Network Address Translation (NAT) Although UDP is a message-oriented, stateless protocol – it doesn’t inherently require confirmed bidirectional connections like TCP, so there is no connection state. However, FortiGate’s session table does use the proto_state= field to track unidirectional UDP as state 0, and bidirectional UDP as state 1. When FortiGate receives the first packet, it creates the entry and sets the state to 0. If the destination replies, FortiGate updates the state flag to 1 for the remainder of the conversation. Notably, ICMP, such as ping and traceroute, have no protocol state and it will always show proto_state=00. FortiGate I Student Guide 300 DO NOT REPRINT © FORTINET Network Address Translation (NAT) To review, we discussed: • • • • • • • Choosing between firewall policy NAT and central NAT Different types of IP pools configuration for source NAT Virtual IPs configuration for destination NAT Central SNAT policy configuration for source NAT DNAT & Virtual IPs Using a SIP session helper for VoIP How to interpret the session table FortiGate I Student Guide 301 DO NOT REPRINT © FORTINET Firewall Authentication In this lesson, we will show you how to use authentication on the firewall policies of a FortiGate. FortiGate I Student Guide 302 DO NOT REPRINT © FORTINET Firewall Authentication After completing this lesson, you should understand the mechanics of firewall authentication on FortiGate and have the practical skills required to configure firewall authentication. FortiGate I Student Guide 303 DO NOT REPRINT © FORTINET Firewall Authentication Traditional firewalling grants network access by authenticating the source IP address and device. This is inadequate and can pose a security risk, as the firewall cannot determine who is using the device to which it is granting access. FortiGate includes authentication of users and user groups. As a result, you can follow individuals across multiple devices. Where access is controlled by user or user group, users must authenticate by entering valid credentials (such as user name and password). Once FortiGate validates the user, FortiGate applies firewall policies and profiles to allow or deny access to specific network resources. FortiGate I Student Guide 304 DO NOT REPRINT © FORTINET Firewall Authentication In this section, we will examine the methods of firewall authentication available on FortiGate. FortiGate I Student Guide 305 DO NOT REPRINT © FORTINET Firewall Authentication FortiGate includes three types of firewall authentication: • • • Local password authentication Server-based password authentication (also called remote password authentication) Two-factor authentication. This is a method of authentication that is enabled on top of an existing method — it cannot be enabled without first configuring one of the other methods. It requires something you know, such as a password, and something you have, such as a token or certificate. Over the next few slides, we will cover each method of firewall authentication in more detail. FortiGate I Student Guide 306 DO NOT REPRINT © FORTINET Firewall Authentication The first and simplest method of authentication is local password authentication. User account information (user name and password) is stored locally on the FortiGate device. This method works well for a single-FortiGate installation. Local accounts are created through the User Definition page where a wizard takes you through the process. For local password authentication, select Local User as the user type and create a user name and password. If desired, you can also add email and SMS information to the account, enable two-factor authentication, and add the user to a pre-configured user group. Once you create the user, you can add the user—or any pre-configured user group in which the user is a member—to a firewall policy in order to authenticate. We will discuss user groups and firewall policies later in this lesson. FortiGate I Student Guide 307 DO NOT REPRINT © FORTINET Firewall Authentication With server-based password authentication, a remote authentication server is used to authenticate users. This method is desirable when multiple FortiGate devices need to authenticate the same users or user groups, or when adding a FortiGate to a network that already contains an authentication server. When you use a remote authentication server to authenticate users, FortiGate sends the user’s entered credentials to the remote authentication server. The remote authentication server responds by indicating whether the credentials are valid or not. If valid, FortiGate consults its configuration to deal with the traffic. Note that it is the remote authentication server — not FortiGate — that evaluates the user credentials. With this authentication method, FortiGate does not store all (or, in the case of some configurations, any) of the user information locally. FortiGate I Student Guide 308 DO NOT REPRINT © FORTINET Firewall Authentication FortiGate provides support for many remote authentication servers, including POP3, RADIUS, LDAP, and TACACS+. POP3 is the only server that requires the email address as the login credential. All other remote authentication servers use the user name. Some POP3 servers require the full email with domain (user@example.com), others require the suffix only, while still others accept both formats. This is determined by the configuration of the server itself and is not a setting on FortiGate. You can only configure POP3 authentication though the CLI. Note that LDAP can be configured to validate with email rather than the user name. FortiGate I Student Guide 309 DO NOT REPRINT © FORTINET Firewall Authentication You can configure FortiGate to use external authentication servers in two ways: • • Create user accounts on FortiGate. With this method, you must select the remote authentication server type (RADIUS, TACACS+, LDAP), point FortiGate to your pre-configured remote authentication server, and add the user to an appropriate group. Remember, POP3 is only configurable through the CLI. Add the remote authentication server to user groups. With this method, you must create a user group and add the pre-configured remote server to the group. Accordingly, any user who has an account on the remote authentication server can authenticate. If you are using an LDAP server as the remote authentication server, you can control access to specific LDAP groups as defined on the LDAP server. Similar to local password authentication, you must then add the pre-configured user group (in which the user is a member) to a firewall policy in order to authenticate. We will discuss user groups and firewall policies later in this lesson. FortiGate I Student Guide 310 DO NOT REPRINT © FORTINET Firewall Authentication The final firewall authentication method you can use is two-factor authentication. Traditional user authentication requires your user name plus something you know, such as a password. The weakness with this traditional method of authentication is that if someone obtains your user name, they only need your password to compromise your account. Furthermore, since people tend to use the same password across multiple accounts (some sites with more security vulnerabilities than others), accounts are vulnerable to attack, regardless of password strength. Two-factor authentication, on the other hand, requires something you know, such as a password, and something you have, such as a token or certificate. This increases the complexity for an attacker to compromise an account, as it puts less importance on often vulnerable passwords. You can use two-factor authentication on FortiGate with both user and administrator accounts. Again, the user (or user group to which the user belongs) is added to a firewall policy in order to authenticate. Note that you cannot use two-factor authentication with explicit proxies. FortiGate I Student Guide 311 DO NOT REPRINT © FORTINET Firewall Authentication You can use one-time passwords (OTPs) as your second factor. OTPs are more secure than static passwords because the passcode keeps changing at regular intervals and is only valid for a short amount of time. Once you use the OTP it cannot be used again, so even if it is intercepted, it is useless. FortiGate can deliver OTPs through tokens, such as FortiToken 200 (hardware token) and FortiToken Mobile (software token), as well as through email or SMS. If delivering over email or SMS, the user account must contain that user contact information. FortiTokens and OTPs through email and SMS are time-based. The FortiTokens, for example, generate a new 6-digit password every 60 seconds (by default). An NTP server is highly recommended to ensure the OTPs remain in sync. FortiGate I Student Guide 312 DO NOT REPRINT © FORTINET Firewall Authentication Tokens use a specific algorithm to generate a one-time password. The algorithm consists of: • • a seed, which is a unique, randomly-generated number that does not change in time, and the time, which is obtained from an internal, accurate, clock. Both seed and time go through an algorithm that generates a one-time password (or passcode) on the token. The passcode has a short life span, usually measured in seconds (60 seconds for a FortiToken 200, possibly more or less for other RSA key generators). Once the life span ends, a new passcode generates. With two-factor authentication using a token, the user must first log in with a static password followed by the passcode generated by the token. A validation server (FortiGate) receives the user’s credentials and validates the static password first. The validation server then proceeds to validate the passcode. It does so by re-generating the same passcode using the seed and system time (which is synchronized with the one on the token) and comparing it with the one received from the user. If the static password is valid, and the one-time password matches, the user is successfully authenticated. Again, both the token and the validation server must use the same seed and have synchronized system clocks. As such, it is crucial that you configure the date and time properly on your FortiGate or link it to an NTP server (recommended). FortiGate I Student Guide 313 DO NOT REPRINT © FORTINET Firewall Authentication You can add a FortiToken 200 or FortiToken Mobile to FortiGate through the FortiTokens page. For the hard token, a serial number is used to provide FortiGate with details on the initial seed value. If you have several hard tokens to add, you can import a text file, where one serial number is listed per line. For the soft token, an activation code is required. Note that each FortiGate (and FortiGate VM) provides two free FortiToken Mobile activations. Any additional tokens must be purchased from Fortinet. You cannot register FortiTokens on more than one FortiGate. If you want to use the same FortiToken for authentication on multiple FortiGate devices, you must use a central validation server, such as FortiAuthenticator. In that case, FortiTokens are registered on FortiAuthenticator and FortiGate uses FortiAuthenticator as its validation server. FortiGate I Student Guide 314 DO NOT REPRINT © FORTINET Firewall Authentication Once you have registered the FortiTokens with FortiGate, you can assign them to users to use as their second factor authentication method. To assign a token, edit (or create) the user account and select Enable Two-factor Authentication. From the drop-down list, select the registered token you want to assign. FortiGate I Student Guide 315 DO NOT REPRINT © FORTINET Firewall Authentication You can also use X.509 digital certificates as your second factor, though FortiGate also accepts certificates as a standalone authentication method. Users that authenticate with digital certificates are known as PKI (Public Key Infrastructure) users. To use certificates, you must first import the Certificate Authority (CA) certificate that is issuing your user certificates into FortiGate. The user must also install their personal certificate in the personal certificate store on their computer (if using the Firefox browser, users must install their user certificate in the Firefox certificate repository). Then you can add the PKI user accounts to FortiGate. You must add your first PKI user through the CLI using the config user peer command (subsequent users can be added through the PKI page in the GUI). You can then include PKI users in firewall user groups and add the group as a source in a firewall policy. Certificate-based authentication is covered in more detail in the FortiGate II: Certificate Operations lesson. FortiGate I Student Guide 316 DO NOT REPRINT © FORTINET Firewall Authentication All the authentication methods we’ve discussed—local password authentication, server-based authentication, and two-factor authentication—use active authentication. Active authentication means that users are prompted to manually enter their login credentials before being granted access. But not all users authenticate the same way. Some users can be granted access transparently, as user information is determined without ever asking the user to enter their login credentials. This is known as passive authentication. Passive authentication occurs with the Single Sign-on method for server-based password authentication: FSSO, RSSO, and NTLM. This is discussed in the FortiGate II: FSSO lesson. FortiGate I Student Guide 317 DO NOT REPRINT © FORTINET Firewall Authentication This section discusses how you can configure FortiGate to point to an existing LDAP or RADIUS server to use for server-based password authentication. FortiGate I Student Guide 318 DO NOT REPRINT © FORTINET Firewall Authentication Lightweight Directory Access Protocol (LDAP) is an application protocol for accessing and maintaining distributed directory information services. The LDAP protocol is used to maintain authentication data that may include departments, people, groups of people, passwords, email addresses, and printers. LDAP consists of a data-representation scheme, a set of defined operations, and a request and response network. In the LDAP protocol, there are a number of operations a client can request, such as search, compare, and add/delete an entry. Binding is the operation where the LDAP server authenticates the user. If the user is successfully authenticated, binding allows the user access to the LDAP server based on that user’s permissions. FortiGate I Student Guide 319 DO NOT REPRINT © FORTINET Firewall Authentication The root of the LDAP directory tree represents the organization itself, and is defined as a Domain Component (DC). The DC is usually a DNS domain such as example.com (as the name contains a dot, it is written as two parts separated by a comma: dc=example,dc=com). Additional entries, known as objects, can be added to the hierarchy as needed. Objects are generally of two types: containers and leafs. Containers are objects that can include other objects, similar to a folder in a file system. Example containers include: • • • Country (represented as c) Organizational Unit (represented as ou) Organization (represented as o) Leafs are objects at the end of a branch and have no subordinate objects. Example leafs include: • • user ID (represented as uid) common name (represented as cn) FortiGate I Student Guide 320 DO NOT REPRINT © FORTINET Firewall Authentication This is an example of a simple LDAP hierarchy. The FortiGate device (acting as an LDAP client) requesting authentication must be configured to address its request to the right part of the hierarchy where user records exist. This is called the Distinguished Name (dn). In this example, the dn is ou=people,dc=example,dc=com. The authentication request must also specify the particular user account entry. This can be either the Common Name (cn) or, on a computer network, the user ID (uid), as that is the information users use to log in. Note that if the object name includes a space, such as John Smith, you must enclose the text with double-quotes. For example: cn=“John Smith”. FortiGate I Student Guide 321 DO NOT REPRINT © FORTINET Firewall Authentication You can configure FortiGate to point to an LDAP server for server-based password authentication through the LDAP Servers page. The configuration depends heavily on the server’s schema and security settings. Windows Active Directory is very common. Common Name Identifier is the attribute name used to find the user name. Some schemas will call this uid. Active Directory calls it sAMAccountName or sometimes cn. Distinguished Name identifies the top of the tree to look in, which is generally the dc value. You must use the correct X.500 or LDAP format. Bind Type depends on the security settings of the LDAP server. Regular bind is required if searching across multiple domains and requires the credentials of a user that is authorized perform LDAP queries (for example, an LDAP administrator). If you want to have a secure connection between FortiGate and the remote LDAP server, enable Secure Connection and include the LDAP server protocol (LDAPS or STARTTLS) as well as the CA certificate that verifies the server certificate. Note that the Test button only tests whether the connection to the LDAP server is successful or not. To test whether a user’s credentials can successfully authenticate, you must use the CLI. FortiGate I Student Guide 322 DO NOT REPRINT © FORTINET Firewall Authentication Use the diagnose test authserver command in the CLI to test whether a user’s credentials can successfully authenticate. You want to ensure that authentication is successful prior to implementing it on any of your firewall policies. The response from the server reports success, failure, and group membership details. FortiGate I Student Guide 323 DO NOT REPRINT © FORTINET Firewall Authentication RADIUS is much different than LDAP, as there is no directory tree structure to consider. RADIUS is a standard protocol that provides authentication, authorization, and accounting (AAA) services. When a user is authenticating, the client (FortiGate) sends an Access-Request packet to the RADIUS server. The reply from the server will be one of the following: • • • Access-Accept, which means that the user credentials are OK Access-Reject, which means that the credentials are wrong, or Access-Challenge, which means that the server is requesting a secondary password ID, token, or certificate. This is typically the reply from the server when using two-factor authentication. Not all RADIUS clients support the RADIUS challenge method. FortiGate I Student Guide 324 DO NOT REPRINT © FORTINET Firewall Authentication You can configure FortiGate to point to a RADIUS server for server-based password authentication through the RADIUS Servers page. The Primary Server IP/Name is the IP address or FQDN of the RADIUS server. The Primary Server Secret is the secret that was set up on the RADIUS server in order to allow remote queries. Backup servers (with separate secrets) can be defined in case the primary server fails. Authentication Method refers to the authentication protocol that the RADIUS server supports. Options include chap, pap (default), mschap, and mschap2. Similar to LDAP configuration, the Test Connectivity button only tests whether the connection to the RADIUS server is successful or not. To test whether a user’s credentials can successfully authenticate, you must use the CLI. Note that Fortinet has a Vendor-Specific Attributes (VSA) dictionary to identify the Fortinet-proprietary RADIUS attributes. This will allow you to extend the basic functionality of RADIUS. You can obtain the Fortinet VSA dictionary from the Fortinet Knowledge Base (kb.fortinet.com). FortiGate I Student Guide 325 DO NOT REPRINT © FORTINET Firewall Authentication Testing RADIUS is much the same as LDAP. Use the diagnose test authserver command in the CLI to test whether a user’s credentials can successfully authenticate. Again, you should do this to ensure authentication is successful prior to implementing it on any of your firewall policies. Like LDAP, it reports success, failure, and group membership details depending on the server’s response. Deeper troubleshooting requires server access. FortiGate I Student Guide 326 DO NOT REPRINT © FORTINET Firewall Authentication This section examines how to assign users to user groups, so you can configure firewall policies to act on the user group. FortiGate I Student Guide 327 DO NOT REPRINT © FORTINET Firewall Authentication FortiGate allows administrators to assign users to groups. Generally, groups are used to more effectively manage individuals that have some kind of shared relationship. You might want to group employees by business area, such as Finance or HR, or by employee type, such as contractors or guests. Once you create user groups, you can add them to firewall policies. This allows you to control access to network resources, as policy decisions are made on the group as a whole. You can define both local and remote user groups on a FortiGate device. There are four user group types: • • • • Firewall Guest Fortinet Single Sign-On (FSSO) RADIUS Single Sign-On (RSSO) The firewall user groups do not need to match any sort of group that may already exist on a server. The firewall user groups exist solely to make configuration of firewall policies easier. Most authentication types have the option to make decisions based on the individual user, rather than just user groups. FortiGate I Student Guide 328 DO NOT REPRINT © FORTINET Firewall Authentication Guest user groups are different from firewall user groups in that they exclusively contain temporary guest user accounts (the whole account, not just the password), and are most commonly used in wireless networks. Guest accounts expire after a predetermined amount of time. Administrators can manually create guest accounts or create many guest accounts at once using randomly-generated user IDs and passwords. This reduces administrator workload for large events. Once created, you can add accounts to the guest user group and associate the group to a firewall policy. You can create guest management administrators that only have access to create and manage guest user accounts. FortiGate I Student Guide 329 DO NOT REPRINT © FORTINET Firewall Authentication You can configure user groups through the User Group page. You must specify the user group type and add users to the group. Depending on the group you create, different configurations are required. For the firewall user group, for example, members can consist of local users, PKI peer users, and users from one or more remote authentication servers. If your remote authentication server is an LDAP server, you can select specific LDAP groups to add to your user group as defined on the LDAP server. Note that you can also select RADIUS groups, but this requires additional configuration on your RADIUS server and FortiGate (see knowledge base article FD36464). User groups simplify your configuration if you want to treat specific users in the same way. For example, if you want to provide the entire Training department with access to the same network resources. If you want to treat all users differently, you would need to add all users to firewall policies separately. FortiGate I Student Guide 330 DO NOT REPRINT © FORTINET Firewall Authentication This section examines how you can use firewall policies for authentication. FortiGate I Student Guide 331 DO NOT REPRINT © FORTINET Firewall Authentication A firewall policy consists of access and inspection rules (compartmentalized sets of instructions) that tell FortiGate how to handle traffic on the interface whose traffic they filter. After the user makes an initial connection attempt, FortiGate checks the firewall policies to determine whether to accept or deny the communication session. However, a firewall policy also includes a number of other instructions, such as those dealing with authentication. You can use the source of a firewall policy for this purpose. The source of a firewall policy must include the source address (IP address), but you can also include the user, user group, and device type as well. In this way, any user, user group, or device that is included in the source definition for the firewall policy can successfully authenticate. User and user groups can consist of local firewall accounts, external server accounts, PKI users, and FSSO users. FortiGate I Student Guide 332 DO NOT REPRINT © FORTINET Firewall Authentication A firewall policy also checks the service in order to transport the named protocols or group of protocols. No service (with the exception of DNS) is allowed through the firewall policy prior to successful user authentication. DNS is usually used by HTTP so that people can use domain names for websites instead of their IP address. DNS is allowed because it is a base protocol and will most likely be required to initially see proper authentication protocol traffic. Hostname resolution is almost always a requirement for any protocol. However, the DNS service must still be defined as allowed within the policy in order for it to pass. In the following example, policy sequence 1 (Full_Access) allows users to use external DNS servers in order to resolve host names, prior to successful authentication. DNS is also allowed if authentication is unsuccessful, because users need to be able to try to authenticate again. Any service that includes DNS would function the same way, like the default ALL service. HTTP service is TCP port 80 and does not include DNS (UDP port 53). FortiGate I Student Guide 333 DO NOT REPRINT © FORTINET Firewall Authentication Aside from the DNS server, the firewall policy must specify the protocols allowed, such as HTTP, HTTPS, FTP, and Telnet. If the firewall policy that has authentication enabled does not allow at least one of the supported protocols for obtaining user credentials, the user will not be able to authenticate. Protocols are required for all authentication methods that use active authentication (local password authentication, server-based password authentication, and two-factor authentication). Active authentication prompts the user for user credentials based on: • • the protocol of the traffic, and the firewall policy. Passive authentication, on the other hand, determines the user identity behind the scenes and does not require any specific services to be allowed within the policy. FortiGate I Student Guide 334 DO NOT REPRINT © FORTINET Firewall Authentication In this example, assuming active authentication is used, any initial traffic from LOCAL_SUBNET will not match policy sequence 1 (Full_Access). Policy sequence 1 looks for both IP and user and user group information (LOCAL_SUBNET and HR-group respectively), and since the user has not yet authenticated, the user group aspect of the traffic does not match. Since the policy match is not complete, FortiGate does not apply that firewall policy. Next, FortiGate evaluates policy sequence 2 to see if the traffic matches. It matches all criteria, so traffic is allowed with no need to authenticate. When only active authentication is used, if all possible policies that could match the source IP have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol). In other words, if policy sequence 2 also had authentication enabled, the users would receive login prompts. If passive authentication is used and it can successfully obtain user details, then traffic from LOCAL_SUBNET with users that belong to HR-group will apply to policy sequence 1, even though policy sequence 2 does not have authentication enabled. FortiGate I Student Guide 335 DO NOT REPRINT © FORTINET Firewall Authentication If you are using both active and passive authentication, and a user’s credentials can be determined through passive means, the user will never receive a login prompt, regardless of the order of any firewall policies. This is because there is no need for FortiGate to prompt the user for login credentials when it can determine who the user is passively. When active and passive authentication methods are combined, active authentication is intended to be used as a backup only when passive authentication fails. FortiGate I Student Guide 336 DO NOT REPRINT © FORTINET Firewall Authentication In this section, we will examine authenticating through a captive portal. FortiGate I Student Guide 337 DO NOT REPRINT © FORTINET Firewall Authentication If you want all users connecting to the network to be prompted for their login credentials (active authentication), you can enable captive portal. Captive portal is a convenient way to authenticate Web users on wired or WiFi networks through an HTML form that requests a user name and password. You can host a captive portal on a FortiGate device or an external authentication server. FortiGate I Student Guide 338 DO NOT REPRINT © FORTINET Firewall Authentication Captive portal, for both wired and WiFi networks, is enabled at the interface level — regardless of the firewall policy that allows it or the port that it ultimately leaves by (authentication being enabled or disabled on the policy is not a factor). This is true for any network interface, including WiFi and VLAN interfaces. On the local network, the captive portal setting must be enabled on the incoming port. You can configure captive portal from the Interfaces page. Select the required interface and under Admission Control, select Captive Portal as the security mode. Note that if configuring captive portal for a WiFi network, the WiFi SSID must first exist. Captive portals are not compatible with interfaces in DHCP mode. FortiGate I Student Guide 339 DO NOT REPRINT © FORTINET Firewall Authentication Under Admission Control, you also have the option to restrict captive portal user access. Select Restrict to Groups to control the access from the captive portal configuration. Select Allow all to control the access in the firewall policy configuration. FortiGate I Student Guide 340 DO NOT REPRINT © FORTINET Firewall Authentication You can also configure a firewall policy to suppress captive portal for specific devices. This is useful for devices that are unable to actively authenticate, such as printers and fax machines, but still need to be allowed by the firewall policy. When suppressed, traffic that matches the source and destination are not presented with the captive portal login page. There are two ways you can bypass captive portal: • • through the GUI. You can enable captive portal exemptions through the GUI in the same place you enabled captive portal (Network > Interfaces). through the CLI. You can enable captive portal exemptions through the security-exempt-list setting. The captive-portal-exempt setting must also be enabled for each firewall policy and only applies to traffic that matches that policy. FortiGate I Student Guide 341 DO NOT REPRINT © FORTINET Firewall Authentication Through the CLI command config firewall policy, you can enable a terms of service disclaimer to be used in combination with captive portal authentication, if desired. A disclaimer is a statement of the legal responsibilities of the user and the host organization that the user must agree to before proceeding. With this configuration (disclaimer + authentication), the portal presents the disclaimer page immediately after successful authentication. The user must accept the terms outlined in the disclaimer in order to proceed to the URL requested. Neither a security exemption list or a captive portal exemption on a firewall can bypass a disclaimer. FortiGate I Student Guide 342 DO NOT REPRINT © FORTINET Firewall Authentication FortiGate allows you to customize portal messages, which includes the login page and disclaimer page. You can customize the messages from the Replacement Messages page. The disclaimer page is in HTML, so you must have knowledge of HTML in order to customize the message. The default layout is the Simple View, which hides most of the replacement messages. Use Extended View to show all editable replacement messages. FortiGate I Student Guide 343 DO NOT REPRINT © FORTINET Firewall Authentication An authentication timeout is useful for security reasons, as it minimizes the risk of someone using the IP of the legitimate authenticated user. It also ensures users do not authenticate and then stay in memory indefinitely. If users stay in memory forever, it would eventually lead to memory exhaustion. There are three options for timeout behavior: • • • Idle – Looks at the packets from the host’s IP. If there are no packets generated by the host device in the configured timeframe then the user is logged out. Hard – Time is an absolute value. Regardless of the user’s behavior, the timer starts as soon as the user authenticates and expires after the configured value. New session – Even if traffic is being generated on existing communications channels, the authentication expires if no new sessions are created through the firewall from the host device, within the configured timeout value. Choose the type of timeout that best suits the needs of authentication in your environment. FortiGate I Student Guide 344 DO NOT REPRINT © FORTINET Firewall Authentication In this last section, we will examine how to monitor authenticated users. FortiGate I Student Guide 345 DO NOT REPRINT © FORTINET Firewall Authentication You can monitor users who authenticate through your firewall policies through the Firewall User Monitor page. It displays the user, user group, duration, IP address, traffic volume, and authentication method. It does not include administrators, as they are not authenticating through firewall policies that allow traffic — they are logging directly into the FortiGate. This page also allows you to de-authenticate a user, or multiple users, simultaneously. FortiGate I Student Guide 346 DO NOT REPRINT © FORTINET Firewall Authentication You can monitor failed firewall authentications from the Failed Authentication page. By doubleclicking any of the entries, a drill-down view appears. This displays more detailed information on that user's authentication attempts, including the date and time of each login attempt, a message explaining the reason each authentication failed (for example, a mismatched password), and the source IP address. This page is useful in determining whether or not your FortiGate is under a brute force attack. If you see multiple failed login attempts from the same IP, you can (for example) add a local-in policy to block that IP. FortiGate I Student Guide 347 DO NOT REPRINT © FORTINET Firewall Authentication In this lesson, we discussed: • • • • • • • • • Firewall authentication Firewall authentication methods Remote authentication servers User configuration for local password authentication, server-based password authentication, and two-factor authentication (tokens, certificates) Active and passive authentication Remote authentication server configuration (LDAP and RADIUS) User authentication Captive Portal and disclaimers configuration Firewall user monitoring FortiGate I Student Guide 348 DO NOT REPRINT © FORTINET SSL VPN In this lesson, you will learn how to use and configure SSL VPNs. SSL VPNs are an easy way of providing access to your private network for remote users. FortiGate I Student Guide 349 DO NOT REPRINT © FORTINET SSL VPN After completing this lesson, you should have these practical skills required to configure an SSL VPN for your organization. You should be able to: • • • • • • Describe the differences between SSL VPN and IPsec VPN Describe the differences between SSL VPN modes Configure SSL VPN options Configure firewall policies and authentication for SSL VPN Strengthen security for SSL VPN access Monitor SSL VPN connected users FortiGate I Student Guide 350 DO NOT REPRINT © FORTINET SSL VPN Before we show how to configure SSL VPN, let’s examine how the technology works. What is SSL VPN? How is it different from other types of VPNs? FortiGate I Student Guide 351 DO NOT REPRINT © FORTINET SSL VPN A virtual private network (VPN) creates a tunnel that gives users or remote LANs secure access to your private network, as if they were connected on your local LAN. A VPN is often used when LANs are separated by an untrusted public network, such as the Internet. As well as providing users with secure access to private networks while they are traveling, a VPN can also interconnect branch office networks located across the Internet, and maybe even on the other side of the world. User data inside a VPN tunnel is encrypted for privacy. It cannot be read, even if it is intercepted by unauthorized users. VPNs also use security methods to ensure that only authorized users can establish a VPN and access the private network’s resources. They typically also provide tamper proofing. FortiGate I Student Guide 352 DO NOT REPRINT © FORTINET SSL VPN (slide contains animations) Most VPNs are SSL or IPsec VPNs. FortiOS supports both, as well as less common, weaker VPNs such as PPTP. In this lesson, we will focus on SSL VPNs. So how are SSL VPNs different from IPsec VPNs? First, the protocols are different. SSL and TLS are commonly used to encapsulate and secure ecommerce and online banking on the web (HTTP). SSL VPNs use a similar technique, but often with non-HTTP protocols encapsulated. SSL is higher up on the network stack than IP, and, therefore, usually require more bits – more bandwidth – for SSL VPN headers. In comparison, IPsec uses some special protocols. The primary one is ESP, which encapsulates and encrypts UDP, RDP, HTTP, or other protocols that are inside in the IPsec tunnel. What else is different? (click) IPsec VPN is a standard. It can interoperate with multiple vendors, and supports peers that are devices and gateways – not just user clients with FortiGate only, like SSL VPN does. (click) The client software is also different. FortiGate I Student Guide 353 DO NOT REPRINT © FORTINET SSL VPN In an SSL VPN, your web browser might be the only client software you need. Go to FortiGate’s SSL VPN portal (an HTTPS web page), and then log in. Alternatively, you can install a plugin or FortiClient. This increases the number of protocols that can be sent through the VPN tunnel. Once you’ve logged in, the SSL VPN connects your computer to your private network. No userconfigured settings are required, and firewalls are typically configured to allow outgoing HTTP, so technical support calls are less likely. Simplicity makes SSL VPN ideal for non-technical users, or users who connect from public computers, such as those found in public libraries and Internet cafés. In comparison, to use IPsec VPN, you’re usually required to install special client software, or have a local gateway, such as a desktop model FortiGate, in order to connect to the remote gateway. You might also need to configure firewalls between VPN peers to allow IPsec protocols. But, IPsec is a standard protocol supported by most vendors, so a VPN session can be established not only between two FortiGate devices, but also between different vendors’ devices, and between a gateway and clients. It’s highly extensible and configurable. By comparison, SSL VPN can only be established between a computer and a vendor-specific gateway, such as FortiGate. In general, IPsec VPN is preferred when tunnels must be up continuously and interoperate with many types of devices, while SSL VPN is preferred when people travel and need to connect to the office. FortiGate I Student Guide 354 DO NOT REPRINT © FORTINET SSL VPN There are three modes you can use to access an SSL VPN. Let’s examine them. FortiGate I Student Guide 355 DO NOT REPRINT © FORTINET SSL VPN Here are the three modes you can use to access SSL VPN. All of them can build an SSL VPN connection, but they don’t all support the same features. What are the differences? Web-only access is the simplest access mode. Like you would with any other HTTPS website, you simply log in to the SSL VPN portal web page on FortiGate. It acts like a server-side reverse proxy that connects you with the applications on the private network. But this mechanism doesn’t work for everything – just a few popular protocols, such as HTTP, FTP, and Windows shares. Port forward access expands on the capabilities offered by web-only access. Instead of using only the browser and FortiGate’s HTTP proxy, a Java applet is installed on the client’s computer that acts as a local proxy. You or your users must configure the applications to send IP traffic to the local proxy applet. Then, the applet can redirect the packets to the FortiGate’s SSL VPN gateway. You must also configure bookmarks in the SSL VPN portal. Tunnel mode supports the most protocols. However, it requires administrator/root privileges because you need to install a VPN client, or, more specifically, a virtual network adapter. To begin tunneling traffic using this virtual adapter, you must use FortiClient or its standalone fortissl VPN client component. Which should you choose? It depends on which applications you need to send through the VPN, the technical knowledge of your users, and whether or not you have administrative permissions on their computers. FortiGate I Student Guide 356 DO NOT REPRINT © FORTINET SSL VPN Web-only mode is used to connect to the FortiGate device from any browser, using HTTPS. Once connected, users need credentials in order to pass an authentication check. Once authenticated, users are presented with a portal that contains resources for them to access. Different users can have different portals with different resources and access permissions. The Bookmarks section contains links to all or some of the resources available for the user to access. The Quick Connection widget allows users to type the URL or IP address of the server they want to reach. A web-only SSL VPN user makes use of these two widgets to access the internal network. The main advantage of web-only mode is that it does not usually require you to install extra software. Web-only mode has two main disadvantages: • • First, all interaction with the internal network must be done from the browser exclusively (through the Web portal). External network applications running on the user’s PC cannot send data across the VPN. Second, a limited number of protocols are supported, such as HTTP/HTTPS, FTP, RDP, SMB/CIFS, SSH, Telnet, VNC, and Ping. FortiGate I Student Guide 357 DO NOT REPRINT © FORTINET SSL VPN Tunnel mode SSL VPN requires the SSL VPN client (FortiClient) to connect to FortiGate. Users must connect to FortiGate through FortiClient and successfully authenticate. When the user initiates a VPN connection with FortiGate through the SSL VPN client, FortiGate establishes a tunnel with the client and assigns the client a virtual IP address from a range of reserved addresses. The client uses the assigned IP address as its source address for the duration of the connection. Inside the tunnel, traffic is encapsulated with SSL/ TLS and sent to the other side. FortiGate receives the traffic and deencapsulates the IP packets, forwarding them to the private network as if they originated from inside the network. The main advantage of tunnel mode over web-only mode is that, once the VPN is established, any IP network application running on the client can send traffic through the tunnel. The main disadvantage is that tunnel mode requires the installation of a VPN software client, which requires administrative privileges. FortiGate I Student Guide 358 DO NOT REPRINT © FORTINET SSL VPN Tunnel mode can operate in two different ways: with and without split tunneling enabled. When split tunneling is disabled, all IP traffic generated by the client’s computer – including Internet traffic – is routed across the SSL tunnel to FortiGate. This sets up FortiGate as the default gateway for the host. You can use this method in order to apply UTM features to the traffic on those SSL VPN clients, or to monitor or restrict Internet access. This adds more latency and increases bandwidth usage. When split tunneling is enabled, only traffic that is destined for the private network behind the remote FortiGate is routed through the tunnel. FortiGate I Student Guide 359 DO NOT REPRINT © FORTINET SSL VPN There are two methods you can use to connect to an SSL VPN. The first method is through a browser. The limitation is that the browser window or tab with the SSL VPN portal must remain open in order to keep the SSL VPN up. The second method is through a standalone SSL VPN client, which requires you to install an SSL VPN client on the user’s PC. When the SSL VPN client is installed, a virtual network adapter called fortissl is added to the user’s PC. This virtual adapter dynamically receives an IP address from FortiGate each time a new VPN is established. All packets sent by the client use this virtual IP address as the source address. FortiGate I Student Guide 360 DO NOT REPRINT © FORTINET SSL VPN Tunnel mode requires the installation of a virtual network adapter, which requires administrative level access to accomplish. Because of this access requirement, tunnel mode is not always a feasible option. For those situations where tunnel mode isn’t practical and web-only mode isn’t flexible enough, there is a web-only extension called port forward mode. Rather than use a virtual adapter to create a tunnel with an IP that is separate from the local IP, port forward uses a Java applet to set up a local proxy that is accessed by connecting to the loopback address. FortiGate I Student Guide 361 DO NOT REPRINT © FORTINET SSL VPN In this section, you will learn how to configure SSL VPN on a FortiGate and related components. FortiGate I Student Guide 362 DO NOT REPRINT © FORTINET SSL VPN To configure SSL VPN, you must take these steps: 1. 2. 3. 4. 5. Configure user accounts and groups. Configure the portal. Configure SSL VPN settings. Create a firewall policy to accept and decrypt packets. This policy is also used to provide access to internal networks. Optionally, you can configure a firewall policy to route SSL VPN user traffic to the Internet and apply security profiles. User traffic will go to the Internet through FortiGate where you can monitor or restrict client access to the Internet. Some steps can be configured in different order, but not always. FortiGate I Student Guide 363 DO NOT REPRINT © FORTINET SSL VPN The first step is to create the accounts and user groups for the SSL VPN clients. All the FortiGate authentication methods, with the exception of remote password authentication using the Fortinet Single Sign-On (FSSO) protocol, can be used for SSL VPN authentication. This includes local password authentication and remote password authentication (using the LDAP, RADIUS, and TACACS+ protocols). You can also configure two-factor authentication with FortiToken for better security. FortiGate I Student Guide 364 DO NOT REPRINT © FORTINET SSL VPN The second step is to configure the portal. A portal is simply a web page that contains tools and resource links for the users to access. Options on the portal can be enabled or disabled to allow or deny access. You can configure options such as tunnel mode, show login history, predefined bookmarks, and more. You can individually configure and link each portal to a specific user or user group so they only have access to required resources. In tunnel mode, when you enable split tunneling you are required to select a Routing Address setting, which usually specifies networks behind the FortiGate for the SSL-VPN users to access. There are several different theme options that provide different color coding to the portals as well. FortiGate I Student Guide 365 DO NOT REPRINT © FORTINET SSL VPN This is a sample of an SSL VPN web-mode portal page after the user logs in. It contains various widgets, based on the configuration of the portal. The Bookmarks, Your Bookmarks, and Quick Connection widgets are for web-only mode. You can download a standalone client from the Download FortiClient drop-down menu. This standalone client is used to connect to SSL VPN in tunnel mode. FortiGate I Student Guide 366 DO NOT REPRINT © FORTINET SSL VPN The third step is to configure the general settings. First, we’ll talk about the connection settings, then the tunnel mode client settings, and, finally, the authentication portal mapping settings. Like other HTTPS websites, the SSL VPN portal presents a digital certificate when users are connecting. By default, the presented certificate is self-signed, which triggers the browser to show a certificate warning. To avoid the warning, you should use a digital certificate signed by a Certificate Authority (CA) that is known to the browser. Alternatively, you can load the digital certificate into the browser as a trusted authority. By default, an inactive SSL VPN is disconnected after 300 seconds (5 minutes) of inactivity. You can change this timeout through the Idle Logout setting in the GUI. Note that the idle logout is separate from the authentication idle timeout that is discussed in the FortiGate I Firewall Authentication lesson. Also by default, the port for the SSL VPN portal is 443. This means users need to connect to the IP address of FortiGate and to port 443 (which is also the standard port for the administration HTTPS protocol) using HTTPS. In the CLI, you can also enable https-redirect under config vpn ssl settings, in which users that connect using HTTP (TCP port 80) will automatically get redirected to HTTPS. FortiGate I Student Guide 367 DO NOT REPRINT © FORTINET SSL VPN In a default configuration, the SSL VPN login portal and the administrator login for HTTPS both use port 443. This is convenient because users do not need to specify the port in their browser. For example, https://www.example.com/ automatically uses port 443 in any browser. This is considered a valid setup on FortiGate because you generally don’t access the SSL VPN login through every interface. Likewise you generally don’t enable administrative access on every interface of your FortiGate. So even though the ports may overlap, the interfaces that each one uses to access may not. If the SSL VPN login portal and HTTPS admin access both use the same port, and are both enabled on the same interface, only the SSL VPN login portal will appear. In order to have access to both on the same interface, you need to change the port number for one of the services. This will affect the port number for that service on all interfaces. FortiGate I Student Guide 368 DO NOT REPRINT © FORTINET SSL VPN Once you set up your SSL VPN connection settings, you can define your Tunnel Mode Client Settings. When users connect, the tunnel is assigned an IP address. You can choose to use the default range or create your own range. The IP range determines how many users can connect concurrently. DNS servers will only be effective if DNS traffic is sent over the VPN tunnel. Generally, this will only be the case when split tunnel mode is disabled and all traffic is being sent from the client PC across the tunnel. FortiGate I Student Guide 369 DO NOT REPRINT © FORTINET SSL VPN The last part of step three is to set up the authentication rules that map users to the appropriate portal and realm. These settings allow different groups of users to access different portals and/or realms. The default rule applies to the root realm and must be present, otherwise an error message appears that prevents any setting changes from being saved. In the above example, accountants and teachers have access only to their own realms. If they need access to the root realm to see the global portal, you would need to add an additional authentication rule. FortiGate I Student Guide 370 DO NOT REPRINT © FORTINET SSL VPN The fourth, and last mandatory step, involves creating firewall policies for login. SSL VPN traffic on FortiGate uses a virtual interface called ssl. . Each virtual domain (VDOM) contains a different virtual interface based on its name. By default, if VDOMs are not enabled, then the device operates with a single VDOM called root. In order to activate and successfully log in to the SSL VPN, there must be a firewall policy from the SSL VPN interface to the interface to which you want to allow access for the SSL VPN users, including all of the users/groups that can log in as the source. Without a policy like this, no login portal is presented to users. If there are resources behind other interfaces that users need access to, then you need to create additional policies that allow traffic from ssl.root to exit those interfaces. FortiGate I Student Guide 371 DO NOT REPRINT © FORTINET SSL VPN Any traffic from SSL VPN users – whether in web portal or tunnel mode – exits from the ssl. interface. Here is an example of firewall policies that are configured to allow access to resources behind other interfaces that users need access to when connected through SSL VPN. FortiGate I Student Guide 372 DO NOT REPRINT © FORTINET SSL VPN If split tunneling is disabled, you need to create an additional firewall policy from ssl.root to the egress interface to allow clients to provide access to the Internet. On this firewall policy, you can also apply security profiles to restrict user access to the Internet. FortiGate I Student Guide 373 DO NOT REPRINT © FORTINET SSL VPN In this section, you’ll learn how to configure realms and bookmarks. FortiGate I Student Guide 374 DO NOT REPRINT © FORTINET SSL VPN By default, all SSL VPN users will see the same bookmarks, configured by an administrator, and the same theme. FortiGate I Student Guide 375 DO NOT REPRINT © FORTINET SSL VPN To add flexibility to your SSL VPN deployment, you may consider configuring SSL-VPN realms. The realms are custom login pages, usually for user groups, such as your accounting team and your sales team, but can be for individual users as well. With realms, users and user groups can access different portals based on the URL they enter. This is unlike a default deployment, where SSL VPN login is handled by going directly to the FortiGate’s IP address. With different portals, you can customize each login page separately, as well as limit concurrent user logins separately. Example of realms on a FortiGate: https://192.168.1.1 https://192.168.1.1/Accounting https://192.168.1.1/TechnicalSupport https://192.168.1.1/Sales FortiGate I Student Guide 376 DO NOT REPRINT © FORTINET SSL VPN The SSL VPN bookmarks provides links to network resources. You can use the administrator-defined bookmarks and you can also add your own personal bookmarks. FortiGate I Student Guide 377 DO NOT REPRINT © FORTINET SSL VPN From the CLI of FortiGate, you can create bookmarks for each user. These bookmarks will appear even if the user bookmark option is disabled in the portal, because that option only effects the users’ ability to create and modify their own bookmarks – not administrator-defined ones. Depending on the type of bookmark you want to create, you may need to configure additional information that the application requires, such as URLs for websites and folders for FTP sites. Only two types of bookmarks can be used with the port forwarding method (an extension of web-only mode): citrix and portforward. Citrix is specific for connecting the client to the citrix server. Portforward is a generic type of bookmark that you can customize to the traffic. FortiGate I Student Guide 378 DO NOT REPRINT © FORTINET SSL VPN When users log into to their individual portal, there is an option that allows them to create their own bookmarks. An administrator must enable the User Bookmarks option on the SSL-VPN Portal page to allow this. Administrators can view and delete user-added bookmarks through the SSL-VPN Personal Bookmarks page. This allows administrators to monitor and remove any unwanted bookmarks that do not meet with corporate policy. Note: If SSL-VPN Personal Bookmarks does not appear as a menu option, you can enable it on the Feature Select page. FortiGate I Student Guide 379 DO NOT REPRINT © FORTINET SSL VPN Instead of just adding bookmarks for individual users, administrators can also add bookmarks for everyone that uses each portal. This allows bookmarks to appear for all users who log in to that particular portal. These bookmarks use the exact same configuration options that personal bookmarks do, but can be configured from the GUI, rather than the CLI. Users cannot modify administrator-added bookmarks, whether you have created them on a per-user or per-portal basis. FortiGate I Student Guide 380 DO NOT REPRINT © FORTINET SSL VPN In this section, you will learn how you can use additional options to restrict users connecting to SSL VPN, which helps to ensure your internal network is secure and can limit the possibility of attacks and viruses entering the network from an outside source. FortiGate I Student Guide 381 DO NOT REPRINT © FORTINET SSL VPN Since SSL VPNs are methods for people outside your network to connect to resources inside your network, you must take appropriate measures to ensure the safety and security of the information in your network. There are multiple options and settings available to help secure SSL VPN access. In the following slides, we’ll cover client integrity checking and restricting host connection addresses. FortiGate I Student Guide 382 DO NOT REPRINT © FORTINET SSL VPN When a user connects to your network through SSL VPN, a portal is established between your network and the user PC. The VPN session is secured natively in two ways: the connection is encrypted and the user must log in with their credentials, such as a user name and password. However, you can configure additional security checks to increase the security of the connection. One method of increasing your security is through client integrity checking. Client integrity ensures that the connecting computer is secure by checking whether specific security software, such as antivirus or firewall software, is installed and running. This feature only supports Microsoft Windows clients, as it accesses the Windows Security Center to perform its checks. Alternatively, you can customize this feature to check the status of other applications by using their Globally Unique Identifier (GUID). The GUID is a unique ID in the Windows Configuration Registry that identifies each Windows application. Client integrity can also check the current software and signature versions for the antivirus and firewall applications. FortiGate I Student Guide 383 DO NOT REPRINT © FORTINET SSL VPN The client integrity check is performed while the VPN is still establishing, just after user authentication has finished. If the required software is not running on the client’s PC, the VPN connection attempt is rejected, even with valid user credentials. Client integrity is enabled per web portal and only by using CLI commands. The list of recognized software, along with the associated registry key value is available through the CLI. Software is split into three categories: antivirus (av), firewall (fw), and custom. Custom is used for customized or proprietary software that an organization may require. Administrators can only configure these settings through the CLI. The disadvantage of enabling client integrity checking is that it can result in a lot of administrative overhead. First, all users must have their security software updated in order to successfully establish a connection. Second, software updates can result in a change to the registry key values, which can also prevent a user from successfully connecting. As such, administrators must have in-depth knowledge of the Windows operating system and subsequent registry behavior in order to properly make extended use of, as well as maintain, this feature. FortiGate I Student Guide 384 DO NOT REPRINT © FORTINET SSL VPN The second method you can use to help secure SSL VPN access is restricting host connection addresses. Setting up IP restriction rules can be very useful when considering proper security configuration. Not all IPs need, or should be allowed, access to the login page. This method allows you to set up rules to restrict access from specific IPs. One simple rule is to allow or disallow traffic based on geographic IP addresses. From the CLI, you can configure the VPN SSL setting to disallow specific IPs. The default configuration is set to Limit access to specific hosts but the Hosts field is empty. You must specify the IP address or network in the Hosts field. This will allow only those users to access the login page. The Allow access from any host setting allows all IPs to connect. FortiGate I Student Guide 385 DO NOT REPRINT © FORTINET SSL VPN In this section, we’ll examine how to monitor SSL VPN users. FortiGate I Student Guide 386 DO NOT REPRINT © FORTINET SSL VPN You can monitor which SSL VPN users are connected from the SSL-VPN Monitor page. This shows the names of all SSL VPN users that are currently connected to the FortiGate, their IP addresses (both inside the tunnel and outside), and connection times. When a user connects using tunnel model, the Active Connections column shows the IP address assigned by FortiGate to the fortissl virtual adapter on the client’s computer. Otherwise, the user is connected only to the web portal page. FortiGate I Student Guide 387 DO NOT REPRINT © FORTINET SSL VPN When an SSL VPN is disconnected, either by the user or through the SSL VPN idle setting, all associated sessions in the FortiGate session table are deleted. This prevents reuse of authenticated SSL VPN sessions (not yet expired) after the initial user terminates the tunnel. The SSL VPN user idle setting is not associated with the firewall authentication timeout setting. It is a separate idle option specifically for SSL VPN users. A remote user is considered idle when FortiGate does not see any packets or activity from the user within the configured timeout period. FortiGate I Student Guide 388 DO NOT REPRINT © FORTINET SSL VPN In this lesson, we discussed: • • • • • • • What SSL VPN is and how it operates Differences between SSL VPN and IPsec VPN Web-only mode, tunnel mode (including split tunneling), and port forwarding Methods of connecting to SSL VPN tunnels Configuring SSL VPN, including portals, bookmarks, and realms Securing SSL VPN access through client integrity checking and restricting host connection access Monitoring SSL VPN users FortiGate I Student Guide 389 DO NOT REPRINT © FORTINET Basic IPsec VPN In this lesson, we will show you how to set up a site-to-site IPsec VPN. VPNs are heavily used in today’s IT infrastructure to join private corporate networks across the Internet. IPsec is an RFC standard. So, whether you have FortiGate devices only or mix in another vendor’s devices, the principles are essentially the same. FortiGate I Student Guide 390 DO NOT REPRINT © FORTINET Basic IPsec VPN After completing this lesson, you should have the practical skills that you need to set up a simple IPsec tunnel between two locations. You will learn how to choose between configuring a policy-based or route-based VPN as well as how to verify the status of each tunnel. FortiGate I Student Guide 391 DO NOT REPRINT © FORTINET Basic IPsec VPN First, let's take a look at some basic IPsec concepts. FortiGate I Student Guide 392 DO NOT REPRINT © FORTINET Basic IPsec VPN What is IPsec? When should you use it? IPsec is a vendor-neutral standard set of protocols used to join two physically distinct LANs. The LANs are joined as if they were a single logical network, despite being separated by the Internet. In theory, IPsec does support null encryption – that is, you can make VPNs that don't encrypt traffic. IPsec also supports null data integrity. But does that provide any advantages over plain traffic? No. No one can trust traffic that may have had an attack injected by an attacker. Rarely do people want data sent by an unknown person. Most people also want private network data, such as credit card transactions and medical records, to remain private. So, in reality, regardless of vendor, IPsec VPNs almost always have settings for three important benefits: •Authentication, to verify the identity of both ends, •Data integrity, or HMAC, to prove that encapsulated data has not been tampered with as it traverses a potentially hostile network, and •Confidentiality, or encryption, to ensure that only the intended recipient can read the message. FortiGate I Student Guide 393 DO NOT REPRINT © FORTINET Basic IPsec VPN If you’re passing your VPN through firewalls, it helps to know which protocols to allow. Really, IPsec is a suite of separate protocols. It includes: • • • Internet Key Exchange (IKE): IKE is used to authenticate peers, exchange keys, and negotiate the encryption and checksums that will be used; essentially, it is the control channel Authentication Header (AH): AH contains the authentication header – the checksums that verify the integrity of the data Encapsulation Security Payload (ESP): ESP is the encapsulated security payload – the encrypted payload, essentially, the data channel So, if you need to pass IPsec traffic through a firewall, remember: allowing just one protocol or port number is usually not enough. Note that the IPsec RFC mentions AH. However, AH does not offer encryption, an important benefit. So it is not used by FortiGate. As a result, you don’t need to allow IP protocol 51. To make a VPN, you must configure matching settings on both ends – whether the VPN is between two FortiGates, a FortiGate and FortiClient, or a third-party device and a FortiGate. If the settings don’t match, tunnel setup will fail. FortiGate I Student Guide 394 DO NOT REPRINT © FORTINET Basic IPsec VPN IPsec provides services at the IP (network) layer. During the tunnel establishment, both ends negotiate the encryption and authentication algorithms to use. After the tunnel has been negotiated and is up, data is encrypted and encapsulated into ESP packets. FortiGate I Student Guide 395 DO NOT REPRINT © FORTINET Basic IPsec VPN What’s encapsulated? It depends on the mode. IPsec can operate in two modes: transport mode, or tunnel mode. • • Transport mode directly encapsulates and protects the fourth layer (transport) and above. The original IP header is not protected and no additional IP header is added. Tunnel mode is a true tunnel. The whole IP packet is encapsulated and a new IP header is added at the beginning. Once the IPsec packet reaches the remote LAN, and is unwrapped, the original packet can continue on its journey. Notice that after you remove the VPN-related headers, a transport mode packet can’t be transmitted any further; it has no second IP header inside, so it’s not routable. For that reason, this mode is usually used only for end-to-end (or client-to-client) VPNs. FortiGate I Student Guide 396 DO NOT REPRINT © FORTINET Basic IPsec VPN In order to create an IPsec tunnel, both devices must establish their security associations (SAs) and secret keys, which are facilitated by the IKE protocol. The IPsec architecture uses SAs as the basis for building security functions into IPsec. A SA is simply the bundle of algorithms and parameters being used to encrypt and authenticate data travelling through the tunnel. In normal two-way traffic, this exchange is secured by a pair of SAs, one for each traffic direction. Essentially, both sides of the tunnel must agree on the security rules. If both sides cannot agree on the rules for sending data and verifying each other’s identity, then the tunnel will not be established. IKE uses two distinct phases: phase 1 and phase 2. FortiGate I Student Guide 397 DO NOT REPRINT © FORTINET Basic IPsec VPN How does FortiGate bring up a VPN? Let’s begin by talking about IKE phase 1. FortiGate I Student Guide 398 DO NOT REPRINT © FORTINET Basic IPsec VPN Phase 1 is when each endpoint of the tunnel – the initiator and the responder – connects and begins to set up the VPN. When they first connect, the channel is not secure yet. An attacker in the middle could intercept unencrypted keys. Neither end has a strong guarantee of the other’s identity, so how can they exchange sensitive private keys? They can’t. First, both ends have to create a temporary secure channel. They’ll use this to protect strong authentication and negotiate the real keys for the tunnel later. FortiGate I Student Guide 399 DO NOT REPRINT © FORTINET Basic IPsec VPN Let’s look at how this works. This is phase 1, where peers say hello and create an SA that defines a temporary secure channel. The SA is called the IKE SA and is birectional. Settings must agree. Otherwise the phase 1 will fail. (Each side wouldn’t be able to decrypt or authenticate traffic from the other.) At the end of phase 1, the negotiated IKE SA is used to negotiate the Diffie-Hellman keys that will be used in phase 2. FortiGate I Student Guide 400 DO NOT REPRINT © FORTINET Basic IPsec VPN Diffie-Hellman uses the public key (that both ends know) plus a mathematical factor called a nonce in order to generate a common private key. This is crucial. With Diffie-Hellman, even if an attacker can listen in to the messages containing the public keys, they cannot determine the secret key. The new private key is used to calculate additional keys for symmetric encryption and authentication. FortiGate I Student Guide 401 DO NOT REPRINT © FORTINET Basic IPsec VPN The ESP protocol usually has problems crossing devices doing NAT. One of the reasons is that ESP does not have port numbers, like TCP and UDP do, to differentiate traffic from one tunnel to another. To solve this, NAT transversal (NAT-T) was added to the IPsec specifications. When NAT-T is enabled on both ends, peers can detect any NAT device along the path. If NAT is found, then: • • Both phase 2 and remaining phase 1 packets change to UDP port 4500 Both ends encapsulate ESP within UDP port 4500 So, if you have two FortiGates that are behind, for example, an ISP modem that has NAT, you will probably need to enable this setting. When NAT-T is set to Forced, UDP port 4500 is always used, even when there is no NAT device along the path. FortiGate I Student Guide 402 DO NOT REPRINT © FORTINET Basic IPsec VPN Once details such as NAT-T and symmetric keys have been determined, your FortiGate is ready to establish the final SAs that define the ESP channel. It does this through IKE phase 2. FortiGate I Student Guide 403 DO NOT REPRINT © FORTINET Basic IPsec VPN Once phase 1 has established a somewhat secure channel and private keys, phase 2 begins. Phase 2 negotiates security parameters for two IPsec SAs – not to be confused with the IKE SA. They are the phase 2 SAs – not the phase 1 SA – that ESP uses to transmit data between LANs. IKE phase 2 does not end once ESP begins. Phase 2 periodically renegotiates cryptography. This maintains security. Also, if you enable perfect forward secrecy, each time phase 2 expires, FortiGate will use Diffie-Hellman to recalculate new secret keys. In this way, new keys are not derived from older keys, making it much harder for an attacker to crack the tunnel. Each phase 1 can have multiple phase 2s. When would this happen? For example, you may want to use different encryption keys for each subnet whose traffic is crossing the tunnel. How does FortiGate select which phase 2 to use? By checking which quick mode selector the traffic matches. FortiGate I Student Guide 404 DO NOT REPRINT © FORTINET Basic IPsec VPN During phase 2, we must configure a pair of settings called quick mode selectors. They identify and direct traffic to the appropriate phase 2. In other words, it allows granular SAs. Selectors behave similarly to a firewall policy. VPN traffic must match selectors in one of the phase 2 SAs. If it does not, the traffic is dropped. When configuring selectors, specify the source and destination IP subnet that will match each phase 2. You can also specify the protocol number and source and destination ports for the allowed traffic. In point-to-point VPNs, such as connecting a branch office FortiGate to a headquarter FortiGate, both sides’ configuration must mirror each other. Quick mode selector configuration for dial-up VPNs is different, and details are covered in the Advanced IPsec lesson. FortiGate I Student Guide 405 DO NOT REPRINT © FORTINET Basic IPsec VPN Let’s talk about how to configure IPsec tunnels using the VPN wizard. FortiGate I Student Guide 406 DO NOT REPRINT © FORTINET Basic IPsec VPN Because encapsulation styles and other settings vary, and any mismatches cause VPNs to fail, starting with FortiOS 5.2, there are VPN templates. You can use these templates to simplify VPN setup – reducing the guesswork about what settings are compatible between devices. The VPN wizard uses these templates to make IPsec VPN creation easier for administrators. FortiGate I Student Guide 407 DO NOT REPRINT © FORTINET Basic IPsec VPN The VPN wizard is comprised of a three-step process. Administrators provide the VPN name, remote IP, authentication method, interfaces, and subnets. When the VPN wizard is completed, it automatically creates many of the required objects: • • • • Addresses and address groups Static routes Policies Phase 1 and phase 2 settings FortiGate I Student Guide 408 DO NOT REPRINT © FORTINET Basic IPsec VPN If you need detailed control of your VPN, such as for IKE version 2, you can still configure it manually. FortiGate I Student Guide 409 DO NOT REPRINT © FORTINET Basic IPsec VPN On FortiGate, there are two ways to manually configure an IPsec VPN. They define how to create the firewall policies for VPN traffic: route-based configuration and policy-based configuration. (In our old documentation, “route-based” used to be called “interface-based”.) How do you know when to use policy-based or route-based? Generally, try to use route-based. It offers more flexibility and control. In comparison, transparent mode supports only policy-based VPNs. FortiGate I Student Guide 410 DO NOT REPRINT © FORTINET Basic IPsec VPN How are the two configuration modes different? • • In a route-based configuration, FortiGate automatically adds a virtual interface with the VPN name. Two firewall policies with the action ACCEPT are usually required: one for sessions originating on the local network, and another for sessions from the remote network. You also need to route the VPN traffic to the virtual network interface. (Usually, you’ll use static routes.) This is the type of VPN configuration created by the VPN wizard. In a policy-based configuration, only one firewall policy with the action IPSEC is usually required. The policy is bidirectional. By default, the GUI hides the policy-based configuration settings. Both sides of your VPN don’t need to be configured using the same mode. You can configure one peer as route-based and the other as policy-based. But the phase 1 and phase 2 settings must match. FortiGate I Student Guide 411 DO NOT REPRINT © FORTINET Basic IPsec VPN If you are configuring a custom VPN, you can start from the wizard. Click Custom (no template). Configure the remote FortiGate’s WAN IP address, and indicate which network interface on this local FortiGate is the gateway that leads to it. FortiGate will use this to connect to the other end. If your peers use pre-shared keys for the initial (IKE) authentication, both peers must be configured with the same pre-shared key. For phase 1, choose which encryption and authentication to propose, and so on. They must match, too. If peers can’t agree on IKE security, even phase 1 won’t be established. FortiGate I Student Guide 412 DO NOT REPRINT © FORTINET Basic IPsec VPN Once phase 1 completes, phase 2 begins. This sets up the ESP tunnels that will be used for actual data transfer. For each subnet on each end of the VPN, you can specify different levels of ESP security. For example, connections to the Finance LAN might need larger key sizes and stronger authentication. To do this, configure multiple phase 2 entries. For simplicity, here, we show only one phase 2: the Local Address is our LAN, and the Remote Address is the remote LAN. Remember that if traffic doesn’t match the quick mode selectors of any phase 2 SA, the IPsec engine will drop the packet. Usually, it’s more intuitive to filter traffic with firewall policies. So if you don’t want to use quick mode selector filtering, you can just create one phase 2 with the quick mode selectors set to 0.0.0.0/0. FortiGate I Student Guide 413 DO NOT REPRINT © FORTINET Basic IPsec VPN If you used the wizard, it would have created routes and policies suitable for a route-based VPN. What if you, for example, have a FortiGate in transparent mode? Transparent mode only supports policybased VPNs, which cannot be created with the wizard (the wizard only creates route-based VPNs.) Remember, first, you must enable the GUI to show policy-based IPsec options. Configure your phases as before, then create a policy. When policy-based VPN settings are visible, an additional firewall policy Action setting is available. Choose IPsec. Then choose the policy-based VPN to use. FortiGate I Student Guide 414 DO NOT REPRINT © FORTINET Basic IPsec VPN With a route-based VPN, firewall policies are different. • • There are two policies usually, not one. The interface doesn’t match a WAN interface; it matches the virtual interface, which, in this example, is named HQ-to-Branch. The VPN wizard is the easiest way to make these. If you did that, you can skip this step. But if you want to manually set up a VPN, use these as examples. FortiGate I Student Guide 415 DO NOT REPRINT © FORTINET Basic IPsec VPN In route-based VPN, you also need to route VPN traffic destined for the remote LAN to the IPsec interface. If you used the wizard, this was created for you automatically. To do this manually, usually you’ll add a static route. You usually do not need this step when configuring a policy-based VPN, as traffic that does not belong to any internal subnet is routed through the default gateway, which uses the WAN interface. FortiGate I Student Guide 416 DO NOT REPRINT © FORTINET Basic IPsec VPN In the GUI, there is a tool to monitor the status of your IPsec VPNs. Through this tool, you can see how much traffic has passed through each tunnel. You can also start and stop individual tunnels, and get additional details. If the tunnel is up, there will be a green arrow appearing next to its name. If it is down or not in use, then a red arrow is displayed. FortiGate I Student Guide 417 DO NOT REPRINT © FORTINET Basic IPsec VPN To review, these are the topics we’ve talked about. We presented an overview of the IPsec technology, which includes phase 1, phase 2, Diffie-Hellman, and quick mode selectors. We also showed the difference between policy-based and route-based configuration modes, how to configure a point-to-point VPN, and how use the VPN monitor. FortiGate I Student Guide 418 DO NOT REPRINT © FORTINET Explicit Proxy In this lesson, you will learn how to configure FortiGate to act as an explicit web proxy. FortiGate I Student Guide 419 DO NOT REPRINT © FORTINET Explicit Proxy After completing this lesson, you will have the practical skills required to configure FortiGate to act as an explicit web proxy. This covers how to use a PAC file and WPAD to configure explicit proxy settings in web browsers, reduce WAN bandwidth using web cache, apply security policies to web proxy traffic based on the HTTP headers, and authenticate and monitor explicit web proxy users. FortiGate I Student Guide 420 DO NOT REPRINT © FORTINET Explicit Proxy A web proxy receives or intercepts requests from a client to a server. If allowed, and if no cache is available, the web proxy forwards the client’s request to the web server. Two TCP connections are created: one from the client to the web proxy, and one from the web proxy to the server. FortiGate I Student Guide 421 DO NOT REPRINT © FORTINET Explicit Proxy An implicit web proxy does not require any configuration changes to the client’s configuration. Clients continue to use the web, just like they would without a web proxy. Clients send requests to the web server’s IP address and port number. The web proxy intercepts the client’s requests transparently; that is, at the IP layer. The destination address doesn’t change. Does this mean that no configuration changes are required to use an implicit web proxy? Not necessarily. In most network configurations, both incoming and outgoing traffic is routed through FortiGate. As a result, all web browsing traffic will be intercepted by the implicit web proxy. However, if a clients’ traffic isn’t configured to be routed through FortiGate, you must reconfigure routing so that the packets will be routed through FortiGate, where the implicit web proxy can intercept it. FortiGate I Student Guide 422 DO NOT REPRINT © FORTINET Explicit Proxy How is an explicit web proxy different from an implicit web proxy? When you use explicit web proxy, you must configure clients to send the requests to the web proxy IP address and port number, not the website’s servers. FortiGate I Student Guide 423 DO NOT REPRINT © FORTINET Explicit Proxy How do you configure users’ web browsers to use an explicit web proxy? One way is to set up the proxy IP address and port manually (browser settings). In large networks you can use an Active Directory login script or roaming profile, rather than configure each computer individually. Alternatively, you can configure browsers to use explicit proxies by installing a PAC file, or using the web proxy auto-discovery protocol (WPAD). FortiGate I Student Guide 424 DO NOT REPRINT © FORTINET Explicit Proxy When you set up an explicit web proxy by configuring the web browser settings, you must provide the proxy’s FQDN or IP address and TCP port number. You can specify only one proxy address at a time. If you want to exempt specific destination IP addresses, subnets, and FQDNs from using the proxy, you can add them to a list. For those destinations, the browser will send the requests directly to the web servers. FortiGate I Student Guide 425 DO NOT REPRINT © FORTINET Explicit Proxy Another configuration method uses a standard explicit auto-configuration file, called a PAC file. A PAC file contains instructions that tell the browser when to use a proxy and which proxy to use, depending on the destination. This configuration method supports the use of multiple web proxy servers. To deploy the PAC file, first you must install it on an HTTP server that the clients can reach. (Your FortiGate can act as the HTTP server for the PAC file.) Then, you must configure all browsers with the PAC file’s URL. In larger networks, you usually won’t do this individually; instead, you will use your domain to define the PAC file’s URL. FortiGate I Student Guide 426 DO NOT REPRINT © FORTINET Explicit Proxy What does a PAC file contain? A PAC file is a JavaScript. It determines whether the request will be proxied, and what the addresses for the proxies are. In this example: • • • The PAC file allows any connection to example.com to bypass the proxies. Connections to servers in the 10.0.0.0/24 subnet use the proxy named fastproxy.example.com. All other requests are made through the proxy named proxy.example.com. FortiGate I Student Guide 427 DO NOT REPRINT © FORTINET Explicit Proxy Browsers use the web proxy auto-discovery protocol (WPAD) to determine the URL where the PAC file is located. WPAD can use two discovery methods: DNS-based and DHCP-based. Most browsers try the DHCP server method first. If it fails, they try the DNS server method. FortiGate I Student Guide 428 DO NOT REPRINT © FORTINET Explicit Proxy (slide contains animation) With the DHCP method, the browser sends a DHCPINFORM request to the DHCP server. (click) The DHCP server replies with the PAC file’s URL. (click) The browser downloads the PAC file, and accesses the Internet through the proxy. FortiGate I Student Guide 429 DO NOT REPRINT © FORTINET Explicit Proxy (slide contains animation) The DNS method is very similar to the DHCP method. The differences are in the required PAC URL. First, the browser queries the DNS server to resolve the FQDN wpad. . (click) The DNS server replies with the IP address of the web server where the PAC file is located. This method always uses TCP port 80 and the PAC file name wpad.dat. (click) The browser downloads the PAC file, then accesses the web through the proxies indicated in the PAC file. FortiGate I Student Guide 430 DO NOT REPRINT © FORTINET Explicit Proxy Usually, you will enable the proxy to cache responses from web servers. A web cache stores responses from web servers. So, when a client repeats a request, FortiGate can quickly send the cached content (response), instead of forwarding the request and waiting for the response. This reduces WAN bandwidth usage, server load, and delay. Web cache is supported in both implicit and explicit web proxy modes. FortiGate I Student Guide 431 DO NOT REPRINT © FORTINET Explicit Proxy If you’ve enabled caching, when the client makes a request, the proxy checks first if the requested URL is already in memory. If it is not, the proxy forwards the request to the server. When it responds, FortiGate stores the response in memory – that is, it adds content to its cache. Additionally, the proxy forwards a copy of the content to the client. FortiGate I Student Guide 432 DO NOT REPRINT © FORTINET Explicit Proxy What happens when a client repeats a request for a URL? FortiGate will recognize that the URL has been requested before and forwards a copy of the content from the cache to the client. Unless the content on the server has changed, the proxy does not need to request it from the server again. From the client’s perspective, each response after the initial request is faster. Because dynamic URLs are not exactly the same, and their content may be personalized for each client, they are usually not cached. FortiGate I Student Guide 433 DO NOT REPRINT © FORTINET Explicit Proxy Given that caching consumes system resources, do you want all users to be able to use the cache? You can configure FortiGate’s HTTP proxy to allow access only to authenticated users that belong to specific user groups. Authentication can be based on either source IP address or HTTP session. How should you decide which to use? IP-based authentication requires less RAM to remember the authenticated sessions. However, it should only be used when each user has a different IP address (and there is no NAT device between them and the FortiGate). If you have multiple users sharing the same IP address, such as in the case of users behind NAT, use HTTP session-based authentication instead. In this mode, each browser inserts an HTTP cookie in its requests. The cookie identifies the user. This method requires slightly more RAM because FortiGate must remember all session cookies. FortiGate I Student Guide 434 DO NOT REPRINT © FORTINET Explicit Proxy What does the traffic flow look like when a user authenticates with the explicit proxy, using HTTP session-based authentication? If a user connects and the request doesn’t have any associated authentication session, FortiGate replies to the browser, requesting login credentials. The browser prompts the user to authenticate, and remembers the authenticated state by storing a cookie. If the same user makes more requests later, the browser automatically sends the same cookie again. FortiGate identifies the user by this session cookie. The user does not need to authenticate for every request, only the first time. FortiGate I Student Guide 435 DO NOT REPRINT © FORTINET Explicit Proxy These are the steps for configuring a FortiGate as an explicit web proxy. We will show the details of each step next. FortiGate I Student Guide 436 DO NOT REPRINT © FORTINET Explicit Proxy By default, the explicit web proxy settings are hidden in the GUI. To show them, enable Explicit Proxy on the Feature Select page. FortiGate I Student Guide 437 DO NOT REPRINT © FORTINET Explicit Proxy Once explicit proxy settings are visible in the GUI, you can enable and configure them. You can configure the TCP port where the proxy is listening, edit and upload the PAC file, and choose the default action that FortiGate takes for traffic that doesn’t match any explicit proxy policy. We will talk about the explicit proxy policies later. FortiGate I Student Guide 438 DO NOT REPRINT © FORTINET Explicit Proxy After enabling the explicit web proxy globally, you must specify on which interfaces the proxy will listen for connections. FortiGate I Student Guide 439 DO NOT REPRINT © FORTINET Explicit Proxy The next step is to create explicit proxy policies to specify which traffic and users are allowed to use the proxy. Policies for explicit proxy are configured in a different configuration section than the regular firewall policies. Proxy traffic can be inspected: antivirus, web filtering, application control, IPS, DLP, and CASI inspections are available. When the proxy traffic matches an explicit proxy policy, FortiGate takes one of three possible actions: accept the traffic, deny it, or request authentication before accepting it. FortiGate I Student Guide 440 DO NOT REPRINT © FORTINET Explicit Proxy If you select Authenticate as the action, you will be presented with the option to add authentication rules. These rules specify which users and user groups are allowed, and what kind of inspection is applied to each of them. FortiGate I Student Guide 441 DO NOT REPRINT © FORTINET Explicit Proxy Authentication for the explicit proxy behaves differently than it does for firewall policies. With the explicit proxy, FortiGate will not fall through to try the next authentication rule. FortiGate always applies the first policy that matches all criteria. It doesn’t evaluate any policy after the first match, even for users that have not authenticated yet. FortiGate I Student Guide 442 DO NOT REPRINT © FORTINET Explicit Proxy In this example, the first proxy policy matches traffic from 10.0.1.0/24. It only allows users that belong to the user group Students. The second policy allows traffic – without authentication – only if the source address matches 10.0.0.0/8. With this configuration, if traffic arrives from the 10.0.1.0/24 subnet, and that user has not authenticated yet, then FortiGate prompts the user to authenticate. Traffic from that source IP address always matches the first policy, and FortiGate does not continue to evaluate other policies in the list after it finds a match. So, FortiGate never applies the second policy for that subnet – only for the rest of 10.0.0.0/8. FortiGate I Student Guide 443 DO NOT REPRINT © FORTINET Explicit Proxy Like with firewall policies, when creating explicit proxy policies, you use firewall address objects to specify the source and destination. There is one category of address objects that are used only for explicit proxy: explicit proxy addresses. Explicit proxy addresses offer more granularity when matching HTTP traffic. They can match HTTP traffic based on the content of any HTTP field. For example, the HTTP headers include a field named Host, which usually contains the FQDN of the web server. With explicit proxy addresses, you can create policies that match the traffic based on this destination FQDN, regardless of the destination IP address. Another example is matching by URL pattern. Explicit proxy addresses can match traffic to URLs that match a regex expression, regardless of the destination IP address. FortiGate I Student Guide 444 DO NOT REPRINT © FORTINET Explicit Proxy There are two groups of explicit proxy address types: One group is for address types that are used as destination in explicit proxy policies. They can match URL patterns, URL categories, and HTTP host names. The other group is for address types that are used as a source in explicit proxy policies. They can match HTTP methods, user agents, and other HTTP headers fields. FortiGate I Student Guide 445 DO NOT REPRINT © FORTINET Explicit Proxy In this example, the administrator created an explicit proxy policy to block any attempt from the student_internal subnet to upload files to the Fortinet website. The administrator created two explicit proxy addresses for this purpose: • • The POST_From_Students address matches any HTTP POST request coming from the student_internal subnet. The Fortinet address matches any web connection to a host name that contains the text string fortinet.com. FortiGate I Student Guide 446 DO NOT REPRINT © FORTINET Explicit Proxy If you are using the WPAD DNS method to configure the browser, you may need to edit the FortiGate configuration to change the default file name and listening port number. As we explained before, the DNS method always assumes that the PAC file is located at http:// :80/wpad.dat. So, if your clients use the DNS method, you must configure FortiGate to offer the PAC file named wpad.dat, and to listen for requests for it on port 80. FortiGate I Student Guide 447 DO NOT REPRINT © FORTINET Explicit Proxy Once the web proxy is working, you can monitor which users are connected to it – that is, the proxy’s session table. You can do this from the GUI, or from the CLI by using the command: diagnose wad user list FortiGate I Student Guide 448 DO NOT REPRINT © FORTINET Explicit Proxy To review, these are the topics that we just talked about. We discussed explicit web proxy concepts. We also showed how to configure and monitor a FortiGate that is acting as an explicit web proxy, and how to configure web browsers to use the proxy. Depending on your situation, we explained that some configuration choices require more RAM, or specific port numbers. FortiGate I Student Guide 449 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode In this lesson, we will show you how to configure, use, and monitor antivirus scanning on a FortiGate. Since antivirus scanning is one of the features that, depending on your configuration and chosen signature database, can use significant RAM, we will also show you how to resolve conserve mode. FortiGate I Student Guide 450 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode After completing this lesson, you should have these practical skills that you can use to configure antivirus and optimize memory usage on your FortiGate. FortiGate I Student Guide 451 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Malicious software has evolved into many types. Although we often refer to all types of malicious software as viruses, not every piece of unwanted software behaves like a virus. Malware is not always self-replicating, and sometimes users willingly install it. To refer inclusively to viruses, worms, Trojans, spyware, and all others, we now use the term malware. Malware can be divided into two major types: • Viruses: Usually installed without user’s consent and spread on their own from one computer to another, generally through an exploit without the user’s knowledge. • Grayware: May require some kind of user interaction. It convinces users that the benefit of installing it outweighs the cost, such as browser toolbars that also track the user’s activity and insert ads into web pages. FortiGate I Student Guide 452 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Regardless of how the virus spreads, once installed, a virus is somehow malicious. Some common malware threats are: • Trojans, such as Zeus, trick users into letting down their defenses and installing them. Once installed, they can spy on user activities to steal sensitive data, such as bank account numbers and passwords. Trojans can also set up a backdoor control on the target host providing access to malicious users. • Worms, such as Conficker and Code Red, spread by connecting to open ports on the network and exploiting misconfigurations or other vulnerabilities. • Spyware, such as Zango, collects information about the user’s computer without the user’s knowledge. • Ransomware, such as the CryptoLocker, holds the computer hostage, often encrypting critical user data with a password or secret key, until payment of some kind is made. • Rootkit enables administrative level access to the target computer without user knowledge or consent. • Key loggers record keystrokes and return them to a remote location – including sending administrator logins and personal email addresses. • Mass mailers transform computers into open relay mail servers for the botnet, often managed through a remote command and control. Are all viruses malicious? By definition, yes. But some academics have written beneficial worm-like software. It spreads through the same exploits, but then cleans infections and/or patches the host. For example, Creeper was followed by Reaper, which removed Creeper from infected systems. FortiGate I Student Guide 453 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Just as viruses have evolved many vectors for spreading, they also have evolved many techniques for evading antivirus engines and manual analysis. Viruses can encrypt their payloads, or change the code. As a result, when comparing a signature to the binary sample, the two won’t be an exact, bit-by-bit match. So in order to detect the virus, the engine must be able to either: • match flexibly, or • ignore the changeable parts of the code, and match only based on the polymorphic or metamorphic engine. FortiGate I Student Guide 454 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Now you know some different ways that viruses spread and evade detection. In this section, you will learn some of the methods that FortiGate uses to detect and block them. FortiGate I Student Guide 455 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode An antivirus is a database of virus signatures to identify infections. During an antivirus scan, in order to be detected as a virus, the virus must match a defined pattern called a signature. Different vendors have different names for the same virus. Some vendors use patterns that detect one virus for each pattern, while others use patterns that are more flexible and can catch multiple viruses with a single pattern. The pattern that is used depends on the vendor’s engine. What is standard is the attack vector designation. It’s at the beginning of the name. For example, if the vector is W32, it represents 32-bit Windows. W64 represents 64-bit Windows and JS represents JavaScript (which is cross-platform). At the host level, a host-based antivirus software such as FortiClient helps. But host-based antivirus cannot be installed on routers. Guest Wi-Fi networks and ISP customers also might not have antivirus software installed. So how can you protect them and your own network from these malware threats? FortiGate I Student Guide 456 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Just like viruses, which have many ways to avoid detection, FortiGate has many techniques that it can use to detect them. They include: • Antivirus Scan: The first, fastest, simplest way to detect malware is if it is an exact match for a signature in the antivirus database. • Grayware: It is not technically a virus. Remember, it is often bundled with innocuous software, but it does have unwanted side effects, so it is categorized as malware. Often, grayware can be detected this way, with a simple FortiGuard Grayware signature. • Heuristics: They are based on probability, so they increase the possibility of false positives, but they also can detect zero-day viruses – viruses that are new and unknown, and therefore no signature exists yet. If your network is a frequent target, enabling heuristics may be worth the performance cost because it can help you to detect a virus before the outbreak begins. By default, when the antivirus scan’s heuristic engine detects a virus-like characteristic, it will log the file as Suspicious – but will not block it. You can choose whether to block or allow suspicious files. The grayware and heuristics are optional functions which must be enabled in the CLI. • You can enable and disable grayware under the CLI command config antivirus setting. • You can configure the action for the heuristic scan to pass/block/disable under the CLI command config antivirus heuristic. As these are done as separate steps, antivirus scanning must be enabled as well. If grayware and heuristic are enabled, FortiGate applies the scan in the following order: Antivirus Scan > Grayware Scan > Heuristics Scan. FortiGate I Student Guide 457 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode What if heuristics is too uncertain? What if you need a more sophisticated, more certain way to detect malware, and to find zero-day viruses? You can integrate your antivirus scans with FortiSandbox. For environments that require more certainty, FortiSandbox executes the file within a protected environment, then examines the effects of the software to see if it is dangerous. For example, let’s say you have two files. Both alter the system registry and are therefore suspicious. One is a driver installation – its behavior is normal – but the second file installs a virus that connects to a botnet command and control server. Sandboxing would reveal the difference, and can be configured to receive supplementary signature database from Sandbox. FortiGate I Student Guide 458 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode You can update your FortiGate’s antivirus database using push, schedule, or both methods. The scheduled updates allow you to configure scheduled updates at regular intervals, such as hourly, daily, or weekly. You can also enable Accept push updates, which allows you to add new definitions as soon as released by FortiGuard. This is useful for high-security environments, as FortiGate will receive urgent security updates as soon as they are released. Regardless of which method you select, virus scanning must be enabled in at least one firewall policy. Otherwise, FortiGate will not download any updates. Alternatively, you can download packages from the Fortinet customer service and support website (requires subscription), and then manually upload them to your FortiGate. You can verify the update status and signature versions from the FortiGuard page on the GUI or you can run diagnose autoupdate status and diagnose autoupdate versions from the CLI. Multiple FortiGuard antivirus databases exist and can be configured under the CLI command config antivirus setting. Support varies by FortiGate model. • All FortiGate devices have the normal database, which only contains signatures for viruses detected in recent months determined by the FortiGuard Global Security Research Team. It is the smallest database, and, therefore, results in the fastest scans, but does not detect all known viruses. • Some models support the extended database, which detects viruses that are no longer active. Vulnerable platforms are still common, and/or these viruses could be an issue later. • The extreme database is intended for high-security environments and detects all known viruses, including for legacy operating systems no longer widely used. FortiGate I Student Guide 459 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode FortiGuard mobile security subscription is a separate subscription from antivirus subscription. You can also click How to Subscribe to get the detailed instructions about the subscription. As more and more organizations are allowing bring your own device (BYOD), mobile security subscription can ensure upto-date protection against the latest threats targeting mobile platforms. You can also view the list of mobile threats covered by FortiGuard from https://fortiguard.com/avmobilethreats. FortiGate I Student Guide 460 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode In this section, we will examine the FortiGate inspection modes, which includes: • Flow-based • Proxy-based The inspection mode determines how FortiGate will scan the traffic for different security profile features. FortiGate I Student Guide 461 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Let’s talk about proxy-based scanning first. Proxy-based scanning typically refers to transparent proxy. It’s called transparent because at the IP layer, FortiGate is not the destination address, yet FortiGate intercepts the traffic anyway. In TCP connections, FortiGate’s proxy generates the SYN-ACK to the client and completes the threeway handshake with the client before creating a second, new connection to the server. If the payload is less than the oversize limit, the proxy buffers transmitted files or emails for inspection before continuing transmission. The proxy analyzes and may change headers such as HTTP Host and URL for web filtering. If a security profile decides to block the connection, the proxy can send a replacement message to the client. This adds latency to the overall transmission speed. How are flow-based scans different? There is no proxy. If you are familiar with the TCP flow analysis of Wireshark, then that is essentially what the flow engine sees. Packets are analyzed and forwarded as they are received. Original traffic is not altered. Therefore, advanced features that modify content, such as safe search enforcement, are not supported. FortiGate I Student Guide 462 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode FortiGate supports two types of scanning modes: • • Flow-based is optimized for performance and supports fewer security features. Proxy-based is optimized for user friendliness and supports more security profile features and more configuration options for those individual features. For example, web profile overrides for web filtering is only supported in proxy mode. The default inspection mode is Proxy and can be toggled from the System Information widget on the dashboard of the FortiGate GUI. If the virtual domain is enabled on FortiGate, you can toggle between flow- and proxy-based inspection mode from Global > System > VDOM for each VDOM. FortiGate I Student Guide 463 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode You can toggle between proxy-based and flow-based inspection, which will result in supported security profiles and related configurations being converted to flow-based or proxy-based. Firewall policies will display security profile and related settings based on the inspection mode selected. Changing from proxy to flow back to proxy will not result in the original configurations and some of the configuration elements will use default configuration settings. FortiGate I Student Guide 464 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode In this section, you will learn how antivirus uses the inspection modes to scan and detect malware. FortiGate I Student Guide 465 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Each protocol’s proxy picks up a connection and buffers the entire file first (or waits until the oversize limit is reached) before scanning. The client must wait for the scanning to finish. If the virus is detected, the block replacement page is displayed immediately. As FortiGate has to buffer the whole file and then do the scanning, it takes a long time to scan. Also from the client point of view, it has to wait for the scanning to finish and might terminate the connection due to lack of data. You can configure client comforting for HTTP and FTP from the config firewall profileprotocol-options command tree. This allows the proxy to slowly transmit some data until it can complete the buffer and finish the scan. This prevents a connection or session timeout. No block replacement message appears in the first attempt, as FortiGate is transmitting the packets to the end client. FortiGate I Student Guide 466 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode With a proxy-based scan, the client sends a request and FortiGate starts buffering the whole file, then sends it to the AV engine for scanning. If the file is clean (without any viruses), FortiGate starts transmitting the file to the end client. If a virus is found, no packets are delivered to the end client and the proxy sends the replacement block message to the end client. FortiGate I Student Guide 467 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode The flow-based full antivirus scan mode uses the full antivirus database (the compact AVDB is a subset of the full antivirus database) and the IPS engine to examine the network traffic. It doesn’t analyze sessions in discrete protocol stages. The flow-based engine starts scanning with a raw IP+TCP packet, not necessarily in order, and has to extract the payload to discover the viral payloads regardless of surrounding protocol details. As the file is transmitted simultaneously, flow-based scanning consumes more CPU cycles, but, depending on your model, some flow-based operations may be performed by a specialized FortiASIC chip, further improving performance. The flow-based scanning caches the copy of the packet locally on the FortiGate and also forwards the packet to the end client at the same time. Once the last packet is received, FortiGate also caches that, but puts the last packet on hold and has the whole file for scanning. The IPS engine checks for the rule match and then sends to the AV engine for scanning. There can be two scenarios if a virus is detected: • If the scan detects a virus in the TCP session when it may have already forwarded packets to the client, it resets the connection, but doesn’t insert the block replacement page. So the client may think it is a network error and try again. The FortiGate IPS engine caches the URL and, during the second attempt to download the same file, the block replacement page displays immediately without engaging the antivirus engine. Even if the client has received most of the file in the first attempt, the file will be truncated and the client will not be able to open a truncated file. • If the virus is detected at the start of the stream, flow-based scanning can insert the block replacement page at the first attempt. FortiGate I Student Guide 468 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode As you can see, the client sends a request and starts receiving the packets immediately, but FortiGate is also caching those packets simultaneously. When the last packet arrives, FortiGate caches it and puts it on hold. Then it sends the whole cached file to the IPS engine where rule match is checked and passed to the AV engine for scanning after that. If the AV scan does not detect any viruses and the result comes back clean, the last cached packet is regenerated and delivered to the client. However, if a virus is found, the last packet is dropped. Even if the client has received most of the file, the file will be truncated and the client will be not able to open a truncated file. Regardless of which mode you use, the scan techniques will give similar detection rates. How can you choose between the scan engines? If performance is your top priority, then flow-based is more appropriate. If security is your priority, proxy-based – with client comforting disabled – is more appropriate. FortiGate I Student Guide 469 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode The flow-based quick scan uses an IPS engine along with an embedded compact antivirus database containing less signatures. The IPS engine examines the network traffic for viruses, worms, Trojans, and malware, without the need to buffer the file being checked. It provides better performance, but detection rate is lower. The quick scan does have some limitations compared to full flow-based scan and proxy-based scan. Quick scan cannot send files to FortiSandbox for inspection, cannot use advanced heuristics, and cannot use mobile malware packages. Low-end FortiGate models don’t support flow-based quick scan. FortiGate I Student Guide 470 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode This table shows the comparison between all three antivirus scanning modes. FortiGate I Student Guide 471 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode So what is the recommended buffer limit? It varies by model and configuration. You can adjust oversize-limit for your unique network for optimal performance. A smaller buffer minimizes proxy latency and (for both scanning modes) RAM usage, but that may allow viruses to pass through undetected. With a buffer that’s too large, clients may notice transmission timeouts. You need to balance the two. If you aren’t sure how large of a buffer you need, you can temporarily enable oversize-log to see if the large files come frequently and are important to allow. Files that are too large for the maximum buffer size cannot be scanned. The default is to allow files to pass. This is because large files are often harmless, and many networks have antivirus software installed on endpoints, which minimizes unnecessary help desk calls. But, if you require a very secure environment, or if your endpoints have no antivirus software, you can change this setting – on a perprotocol basis from the CLI – so that FortiGate blocks oversized files. If oversized files are blocked, then your endpoints are safe. You won’t need logs about oversize files for forensics, so you may be able to improve performance slightly by disabling oversize-log. FortiGate I Student Guide 472 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Large files are often compressed. When compressed files go through scanning, the compression acts like encryption: the signatures won't match. So, FortiGate must decompress the file in order to scan it. Before decompressing a file, FortiGate must first identify the compression algorithm. Some archive types can be correctly identified using only the header. Also, FortiGate must check whether the file is password-protected. If the archive is protected with a password, FortiGate can’t decompress it, and, therefore, can’t scan it. FortiGate then decompresses files into RAM. Just like other large files, the RAM buffer has a maximum size configured in uncompress-oversize-limit. Increasing this limit may decrease performance, but it allows you to scan larger compressed files. If an archive is nested – for example, if an attacker is trying to circumvent your scans by putting a ZIP file inside the ZIP file – FortiGate will try to undo all layers of compression. By default, FortiGate will attempt to decompress and scan up to 12 layers deep, but you can configure it to scan up to 200 layers deep. Often, you shouldn’t increase this setting as it increases RAM usage. FortiGate I Student Guide 473 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Full flow-based and proxy-based scanning buffers up to your specified file size limit. The default is 10 MB. It’s large enough for most files, except movies. If your FortiGate model has more RAM, you may be able to increase this threshold. Without a limit, very large files could exhaust the scan memory. So this threshold balances risk vs. performance. Is this tradeoff unique to FortiGate, or to a specific model? No. Regardless of vendor or model, you must make a choice. This is due to the difference between scans in theory, that have no limits, and scans on real-world devices that have finite RAM. In order to detect 100% of malware regardless of file size, a firewall would need infinitely large RAM – something that no device has in the real world. Most viruses are very small. This table shows a typical tradeoff. You can see that with the default 10 MB threshold, only 0.01% of viruses pass through. FortiGate I Student Guide 474 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode The antivirus starts buffering the file and checks for the oversize and uncompressed oversize file limits. If the buffer is full, the antivirus scan has a simple behavior: FortiGate will, depending on your setting, either block or pass the file. The default action is to pass the large files bigger than buffer. This is because FortiGate does not have the entire file and it would be impossible to determine whether or not the file contains a virus. If the file has been completely transmitted – that is, FortiGate reaches the byte that marks the end of the file (EoF) – then FortiGate uses these scans in this order. The virus scan is first, because the results have high certainty and the computations are fast. Heuristics, which are less certain, are applied last. If you consider all of these settings together, this is the complete decision tree that FortiGate uses for antivirus scans. FortiGate I Student Guide 475 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode In this section, you will learn how to configure an antivirus profile on FortiGate and related components. FortiGate I Student Guide 476 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode The antivirus profile can be configured from the AntiVirus page. The full flow-based and proxy-based antivirus profiles provide the same inspection options, which include: • Include Mobile Malware Protection: The mobile malware protection contains signatures for mobile malware such as android devices. It is also worth mentioning that mobile malware protection requires a separate license. • Treat Windows Executables in Email Attachment as Viruses: By default, this option is enabled and files (including compressed files) identified as Windows executables can be treated as viruses. From the antivirus profile, you can define what FortiGate should do if it detects an infected file. Once an antivirus profile is configured it is applied in the firewall policy. But what about encrypted protocols? Encryption is a popular method for attackers to circumvent security. As you would expect, FortiGate can scan encrypted protocols, which we will examine shortly. FortiGate I Student Guide 477 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Protocol options provides more granular control, allowing you to configure protocol port mappings, common options, web, and email options to name a few. It is also worth mentioning that in proxy-based VDOM, these settings can be configured from the Proxy Options page in the GUI. The Proxy Options settings are not only applicable to proxy-based VDOMs, but also to flow-based VDOMs and can be configured under config firewall profile-protocol-options in the CLI. Protocol options are used by antivirus and other security profiles, such as web filtering, DNS filtering, and DLP sensor to name a few. Once protocol options are configured, it is applied in the firewall policy. FortiGate I Student Guide 478 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode To scan secure protocols, select an SSL/SSH inspection profile in the traffic’s matching firewall policy. There are two levels of inspection: • Certificate-only • Full content inspection Certificate-only inspection verifies the certificate and any unencrypted headers that are sent before encryption begins. FortiGate doesn’t interrupt the handshake. So, when the certificate-only inspection is applied, antivirus can’t scan contents and is effectively bypassed. When is certificate-only mode effective? Only if you need to act on the certificate or URL of a website. In this case, the client sends unencrypted headers before the encryption handshake occurs. What if you want to scan the content inside the payload of the packet? In full inspection level, FortiGate terminates the SSL/TLS handshake at its own interface, before it reaches the server. When certificates and private keys are exchanged, it is with FortiGate and not the server. Next, FortiGate starts a second connection with the server. Because traffic is unencrypted while passing between its interfaces, FortiGate can inspect the contents and look for matches with the antivirus signature database, before it re-encrypts the packet and forwards it. For these reasons, full inspection level is the best choice for making the antivirus scan effective. FortiGate I Student Guide 479 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode The SSL/SSH profile allows to you configure the inspection method, protocol port mapping, and exemption from SSL/SSH inspection. If you set the inspection method to Full SSL Inspection, FortiGate validates the certificate, but also decrypts the payloads for antivirus scanning. As this method uses an authorized man-in-the-middle (MITM) attack, clients will detect the inspection. Users may need to either override the SSL validation failure or install your certificate authority (CA) certificate. Once the SSL/SSH profile is configured it is applied in the firewall policy. FortiGate I Student Guide 480 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode For proxy-based scanning (with client comforting disabled), a block replacement page is immediately displayed if a virus is detected. For flow-based scanning, if a virus is detected at the start of the stream, the block replacement page is inserted at the first attempt. However, if the virus is detected after transmitting a few packets, the block replacement page is not inserted. However, FortiGate caches the URL and can insert the replacement page immediately on the second attempt. Note that if deep inspection is enabled, all HTTPS-based applications will also provide this replacement message. The block page includes information about the: • • • • • • File name Virus name Web site host & URL Source & Destination IP User name and group (if authentication is enabled) Link to FortiGuard Encyclopedia – which provides analysis, recommended actions (if any), and detection availability You can go directly to the FortiGuard Encyclopedia website (http://fortiguard.com/encyclopedia) to view information about other malware. You can also scan and/or submit a sample of a suspected malware at http://submission.fortinet.com. FortiGate I Student Guide 481 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode You can find virus scanning statistics through the Advanced Threat Protection Statistics widget on the dashboard. If your FortiGate is submitting files for sandboxing, it keeps statistics about the number of files submitted and the results of those scans. These statistics are separate from files that are scanned locally on FortiGate. FortiGate I Student Guide 482 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode If you have logging enabled, you can find details about them under the AntiVirus log page. When the antivirus scan detects a virus, by default it creates a log about what virus was detected, as well as the action, policy ID, antivirus profile name, and detection type. It also provides a link for more information on the FortiGuard website. You can also view log details under the Forward Traffic log page, where firewall policies record activity. You’ll also find a summary of traffic where FortiGate applied an antivirus action. Again, this is because antivirus is applied on a firewall policy. FortiGate I Student Guide 483 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode In this section, you will learn about memory conserve mode. FortiGate I Student Guide 484 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode If your FortiGate memory usage is high, you should examine the event log. Look for messages related to conserve mode. Memory conserve mode occurs when FortiGate does not have enough RAM available to handle traffic. UTM inspection (especially proxy-based) increases memory usage beyond simple firewall policies. In other words, when antivirus is enabled, FortiGate is more likely to use more memory, which can cause FortiGate to go in to conserve mode. You can determine whether antivirus or any other process is using too much memory by running the CLI command diagnose sys top. There are two types of memory conserve mode: kernel and system. FortiGate I Student Guide 485 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Two margins or thresholds determine when FortiGate enters and exits the kernel conserve mode. For all the latest FortiGate models (which have 64-bit CPUs) the margins for kernel conserve mode depend on the total overall memory. When a FortiGate is in kernel conserve mode, any proxy inspection is bypassed, and administrators cannot perform configuration changes. FortiGate I Student Guide 486 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode Like kernel conserve mode, two different thresholds determine when FortiGate enters and exits the system conserve mode. The margins also depend on the total amount of overall memory. FortiGate I Student Guide 487 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode The av-failopen is the CLI (only) setting that controls FortiGate’s behavior while it is in system conserve mode. FortiGate I Student Guide 488 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode This command is used to determine if a FortiGate device is currently in system conserve mode. FortiGate I Student Guide 489 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode These are the entries generated in the event logs when a FortiGate enters kernel and system conserve mode. FortiGate I Student Guide 490 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode An option related to fail-open sessions is av-failopen-session. This setting kicks in not during a high memory situation, but when a proxy on the FortiGate runs out of available sessions to process the traffic. If av-failopen-session is enabled, then FortiGate will act according to the av-failopen setting. Otherwise, by default, it will block new sessions until proxy connections become available. FortiGate I Student Guide 491 DO NOT REPRINT © FORTINET Antivirus and Conserve Mode To review, here are the topics we covered in this lesson. We discussed: • • • • • • • • • • • • • Malware terminology The different types of scanning that can be enabled on FortiGate Three types of antivirus database Sandboxing and how it can be used Blocking botnet connections The difference between proxy-based and flow-based virus scanning The different antivirus databases The behavior of oversized files The order of operations within the virus scanning engine How to handle an undetected piece of malware Virus scanning encrypted traffic How to read virus detection logs What memory conserve mode is FortiGate I Student Guide 492 DO NOT REPRINT © FORTINET Web Filtering In this lesson, we will show you how to set up filters to control website access. This feature is commonly used by network administrators. FortiGate I Student Guide 493 DO NOT REPRINT © FORTINET Web Filtering After completing this lesson, you should have these practical skills: • • • • • • • Identify FortiGate web filtering mechanisms Choose an appropriate web filtering mode to manage and track web content Apply web or DNS filter profiles Create static URL or domain filters Override FortiGuard web filtering Apply filter exemptions and rating overrides Monitor logs for web filtering events Accordingly, you will know how to select the appropriate URL filter method for blocking, monitoring, exempting, or allowing websites. Familiarity with website design and behavior, as well as the HTTP protocol, are useful to understanding this lesson. Lab exercises can help you to test and reinforce your skills. FortiGate I Student Guide 494 DO NOT REPRINT © FORTINET Web Filtering Web filtering helps to control, or track, the websites that people visit. There are many reasons why network administrators apply web filtering, such as to: • • • • • • • preserve employee productivity, prevent network congestion, where valuable bandwidth is used for non-business purposes, prevent loss or exposure of confidential information, decrease exposure to web-based threats, limit legal liability when employees access or download inappropriate or offensive material, prevent copyright infringement caused by employees downloading or distributing copyrighted materials, and prevent children from viewing inappropriate material. FortiGate I Student Guide 495 DO NOT REPRINT © FORTINET Web Filtering There are two ways you can apply filtering to websites: web filtering and DNS filtering. Let’s start by defining how FortiGate handles the URL filtering process. FortiGate I Student Guide 496 DO NOT REPRINT © FORTINET Web Filtering FortiGate website filters are also security profiles, which are customizable according to the selected inspection mode. So, the first step before setting up any web filter is to configure the inspection mode. Inspection mode is a system setting, customizable at the VDOM level. When your FortiGate is set up to proxy inspection mode, a proxy options profile must also be defined. This profile determines the protocols that your security profiles will use, for example, to inspect web or DNS traffic. Note that HTTPS inspection port numbers, and other settings related to the handling of SSL, are defined separately in the SSL/SSH inspection profile. FortiGate I Student Guide 497 DO NOT REPRINT © FORTINET Web Filtering FortiGate’s inspection modes have different considerations to filter websites: • Flow-based web filtering is achieved by analyzing the TCP flow of the traffic between the client and the server. It provides less flexibility, and has less configuration options to inspect web traffic. It intercepts at Layer 3 and works with the Layer 4 data. • Proxy-based web filtering is achieved using a transparent proxy that intercepts traffic between the client and the server. Proxy-based provides more flexibility to inspect web traffic because it intercepts at Layer 7. It also has more configuration options. However, note that this option uses more CPU resources. FortiGate I Student Guide 498 DO NOT REPRINT © FORTINET Web Filtering As mentioned, you can also inspect DNS traffic, but this option is limited only to proxy-based mode, and is presented as a new security profile feature. How does it work? Rather than looking at the HTTP protocol, this option filters the DNS request that occurs prior to an HTTP GET request. This has the advantage of being very lightweight, but at a cost, because it lacks the precision of HTTP filtering. Every protocol will generate DNS requests in order to resolve a host name, therefore this kind of filtering will impact all of the higher level protocols that depend on DNS, not just web traffic. For example, it could apply FortiGuard categories to DNS requests for FTP servers. Very few web filtering features are possible beyond host name filtering, due to the amount of data available at the point of inspection. FortiGate I Student Guide 499 DO NOT REPRINT © FORTINET Web Filtering (slide contains animation) This example illustrates the difference between the traditional HTTP filter and filtering at the DNS lookup process. (click) DNS filtering looks at the nameserver response, which typically occurs when you connect to a website. (click) Web filtering looks for the HTTP 200 response, returned when you successfully access the website. So, as shown, in HTTP the domain name and URL are separate pieces. The domain name might look like this in the header: Host: www.acme.com, and the URL might look like this in the header: /index.php?login=true. If we filter by domain, sometimes it blocks too much. For example, the blogs on tumblr.com are considered different content, because of all the different authors. In that case, you can be more specific, and block by the URL part, tumblr.com/hacking, for example. Remember the Host: header? That is what gets the DNS lookup before the HTTP request. Obviously the URL is not in a DNS request. FortiGate I Student Guide 500 DO NOT REPRINT © FORTINET Web Filtering Let’s summarize the web inspection modes. Proxy-based caches traffic, so it can cause a noticeable delay depending on the file size, oversize limit, and connection speed. It does, however, support a greater number of web filtering features. Flow-based has a higher throughput rate, compared to proxy-based, because it does not cache data so there is no transmission delay. DNS-based is very lightweight because it handles only the nameserver lookup, but suffers from accuracy issues because it does not see the full URL. FortiGate I Student Guide 501 DO NOT REPRINT © FORTINET Web Filtering Now, let’s see how FortiGate applies DNS and web filtering by querying the FortiGuard categories. FortiGate I Student Guide 502 DO NOT REPRINT © FORTINET Web Filtering Rather than block or allow websites individually, FortiGuard category filtering looks at the category that a website has been rated with. The action is taken based on that category, and not based on the URL itself. FortiGuard category filtering is a live service that requires an active contract, which validates connections to the FortiGuard network. If the contract expires, there is a 7-day grace period to renew it before the service cuts off. So, after the 7-day grace period, FortiGate will not be able to rate websites and every visit will be treated as a rating error. Also, FortiManager can be configured to act as a local FortiGuard server instead. For this it is necessary to download the databases into FortiManager and configure your FortiGate to validate the categories against FortiManager instead of FortiGuard. FortiGate I Student Guide 503 DO NOT REPRINT © FORTINET Web Filtering How does FortiGuard decide the categories? Website categories are determined by both automatic and human methods. The FortiGuard team has automatic web crawlers that look at various aspects of the website in order to come up with a rating. There are also people who examine websites and look into rating requests to determine categories. To review the complete list of categories and subcategories, go to www.fortiguard.com/webfilter. FortiGate I Student Guide 504 DO NOT REPRINT © FORTINET Web Filtering So, how does it work? FortiGate queries the FortiGuard Distribution Network (FDN)—or the FortiManager if it has been configured to act as a local FortiGuard server—to determine the category of a requested webpage. Hence, when users visit websites, FortiGate uses the FortiGuard live service to find out the category for the URL and take a configured action for that category, such allow or block access. With this feature you can perform bulk URL filtering without needing to individually define each website. Also, to use the FortiGate’s DNS filter, you must use the FortiGuard DNS service for DNS lookups. DNS lookup requests sent to the FortiGuard DNS service return with an IP address and a domain rating that includes the FortiGuard category of the webpage. You can enable the FortiGuard category filtering on the web filter or DNS filter profiles. Categories and sub-categories are listed and the action to perform can be individually customized. The available actions are: allow, block, monitor, warning, and authenticate. Warning and authenticate are exclusively category-based actions. Let’s see how they work. FortiGate I Student Guide 505 DO NOT REPRINT © FORTINET Web Filtering The warning action is only available for proxy-based inspection. This action informs users that the requested website is not allowed by the internet policies. However, it gives the choice to go to the website or go back to the previous website. The warning interval can be customized, so you can present this warning page at a specific time during your configured period. FortiGate I Student Guide 506 DO NOT REPRINT © FORTINET Web Filtering The authenticate action is also a FortiGuard category-based action for proxy-based inspection. This action blocks the requested websites, unless the user enters a successful passcode. The interval of time to allow access with this category is customizable. So users are not prompted to authenticate again if they access other websites in the same category, until the timer expires. You can apply this action to define individual users that belong to any authentication group. FortiGate I Student Guide 507 DO NOT REPRINT © FORTINET Web Filtering There’s also another feature to customize quotas of time to access the categories set up to monitor, warning, or authenticate in the web filter profile. You can customize multiple quotas (timers). Each one can either be linked to a single category or multiple categories. If the quota applies to multiple categories, the timer is shared among all the categories instead of having a single timer for each individual category. If the authentication action is not enabled, FortiGate automatically assigns the quotas for each source IP as the monitor feature shows. Let’s see how quotas work. FortiGate I Student Guide 508 DO NOT REPRINT © FORTINET Web Filtering As illustrated, the FortiGuard quota limits the time users spend on websites, based on category. A quota cannot redirect you once the website is loaded in the browser. For example, if you have 45 seconds left on your quota, and you access a website from this category, it will likely finish loading before the remaining 45 seconds. Then you can stay in that site, and it wont be blocked until the browser is refreshed. The reason for this is that the connection to the website is not generally a live stream. Once you receive the information, the connection is closed. FortiGate I Student Guide 509 DO NOT REPRINT © FORTINET Web Filtering Some FortiGate features can’t provide direct feedback to users. For example, FortiGuard quota doesn’t provide any feedback until users exceed the quota and refresh the browser, unless the Fortinet bar is enabled. The Fortinet bar injects a Java applet that communicates to FortiGate and gets additional information from features that would otherwise provide no direct feedback. The Fortinet bar provides a countdown for FortiGuard quotas. Other features that can’t block pages (for example, application control) will show block events in the top bar. FortiGate I Student Guide 510 DO NOT REPRINT © FORTINET Web Filtering FortiGate can maintain a list of recent website’s rating responses in memory, so if the URL is already known, FortiGate doesn’t send back a rating request. Two ports are available to query the servers (FortiGuard or FortiManager): port 53 and port 8888. Port 53 is the default, since it is also the port used for DNS and almost guaranteed to be open. However, any kind of inspection will reveal that this traffic is not DNS and prevent the service from working. In this case, you can switch to the alternate port 8888, but this port is not guaranteed to be open in all networks, so you will need to check beforehand. Caching responses reduces the amount of time it takes to establish a rating for a website. Also, memory lookup is much quicker than packets travelling on the Internet. The timeout defaults to 15 seconds, but can be adjusted as high as 30 seconds if necessary. FortiGate I Student Guide 511 DO NOT REPRINT © FORTINET Web Filtering There is always the possibility for errors in ratings, or a scenario where you simply do not agree with the rating given. So, you can use the web portal to contact the FortiGuard team to submit a website for a new rating, or get it rated if it is not already in the database. FortiGate I Student Guide 512 DO NOT REPRINT © FORTINET Web Filtering Category filtering is not granular like static URL filtering. If you want to change any default FortiGuard categories, FortiGate provides an override option. FortiGate I Student Guide 513 DO NOT REPRINT © FORTINET Web Filtering When using FortiGuard category filtering to allow or block access to a website, one option is to make a web rating override and define the website into a different category. Web ratings are only for host names—no URLs or wildcard characters are allowed. If the contract expires, and the 7-day grace period passes, web rating overrides will be not be effective. All website categories will still be considered rating errors. FortiGate I Student Guide 514 DO NOT REPRINT © FORTINET Web Filtering If you want to make an exception, for example, rather than unblock access to a potentially unwanted category, just change the website to an allowed category. The reverse can also be performed, you can block a website that belongs to an allowed category. Remember that changing categories does not automatically result in a different action for the website. This will depend on the settings within the web filter profile. FortiGate I Student Guide 515 DO NOT REPRINT © FORTINET Web Filtering If the predefined categories within FortiGuard are not suitable for the situation, you can add additional customized categories. These custom categories can be added and deleted as needed, so long as they are not in use. FortiGate I Student Guide 516 DO NOT REPRINT © FORTINET Web Filtering You can also override the filter profile. Web profile overrides change the rules that are used to inspect traffic. It authorizes some users, user groups, or predefined source IPs, to use a different web filter profile to inspect their traffic. In the example shown here, the new profile applied to the user Student inspects all of their web traffic from that point on, until the timer expires. To use this, an override authentication must be enabled. Once the web profile override is enabled, the FortiGuard block page will show a link that users can select to activate the override. This feature is available only if FortiGate is set to perform proxy-based inspection. FortiGate I Student Guide 517 DO NOT REPRINT © FORTINET Web Filtering As you have noticed so far, web filtering only applies to the HTTP protocol. So, how does FortiGate scan traffic over HTTPS? FortiGate scans HTTPS sites through the SSL inspection profile settings. This security profile must to be applied to the firewall policy too. The SSL Certificate Inspection method reads only unencrypted data from the hello message, whereas the Full SSL Inspection method will proxy SSL, allowing for full content inspection. SSL and certificates are covered in more detail in the FortiGate II: Certificate Operations lesson. FortiGate I Student Guide 518 DO NOT REPRINT © FORTINET Web Filtering Let’s examine the DNS and web filter security profiles, which allow you to perform individual and local filtering actions, rather than use the FortiGuard categories. FortiGate I Student Guide 519 DO NOT REPRINT © FORTINET Web Filtering Here’s a look at the new DNS filter profile. This security profile is only available when FortiGate is set to perform proxy-based inspection. The DNS filter includes various configuration settings. You can enable or disable the FortiGuard category-based filter and the static domain filter. You also have the option to: • • • block DNS requests to known botnet command and control, allow DNS requests when a rating error occurs from the FortiGuard web filter service, and redirect blocked requests to a specific portal (the Use FortiGuard Default setting is recommended). Once you have enabled and saved the settings you require, remember to apply this profile to your firewall policy to activate the options. Any traffic being examined by the policy will have those operations applied to it. FortiGate I Student Guide 520 DO NOT REPRINT © FORTINET Web Filtering You can configure DNS filtering to allow, block, or monitor access to web content through the static domain filter. Entries in the domain list are checked against the visited websites. If a match is found, the configured action is taken. Patterns set to the type Simple are exact text matches. Patterns set to Wildcard allow for some flexibility in the text pattern by allowing wildcard characters and partial matching to occur. Patterns set to Reg Expression allow for the use of PCRE regular expressions. With this feature you can prevent lots of HTTP requests from ever being made, because the initial lookup fails. That’s the performance tradeoff. FortiGate I Student Guide 521 DO NOT REPRINT © FORTINET Web Filtering When you enable Block DNS request to known botnet C&C from your DNS filter profile, DNS lookups are checked against the botnet command and control database. This database is dynamically updated from FortiGuard and stored on FortiGate. All matching DNS lookups are blocked. Matching uses a reverse prefix match, thus all subdomains are also blocked. This service requires an active web filtering license. FortiGate I Student Guide 522 DO NOT REPRINT © FORTINET Web Filtering Now let’s look at the web filter profile. This security profile supports both proxy-based and flow-based inspection modes. However, depending on the mode you select, the available settings are different. The flow-based inspection has fewer available options. In this example, FortiGate is set to perform a proxy-based inspection. The FortiGuard category-based filter divides the websites based on categories and sub-categories by FortiGuard, as explained previously. Other local options (which we’ll discuss over the next few slides) include: • • • • Search Engines Static URL Filter Rating Options Proxy Options Once your filter is configured, apply this profile to your firewall policy so the filter is applied to your web traffic. FortiGate I Student Guide 523 DO NOT REPRINT © FORTINET Web Filtering Search engines filtering provide two important features: safe search and YouTube EDU filtering. • Safe search is an option that some browsers have to apply internal filters to the search results. When you enable safe search for the supported search sites, code is appended to the URL to enforce its use. For example, on a Google search it would mean adding the string &safe=active to the URL in the search. So, even if it is not locally enabled in the browser, FortiGate will apply it to the requests when it passes through. It supports safe search for Google, Yahoo, Bing, and Yandex. • YouTube EDU filtering is a service offered by YouTube to educational institutions. Unlike normal safe search, this does not append the URL, but adds an HTTP header into the packets. FortiGates requires the YouTube ID provided when you created your account, as this identifies your institution to YouTube when people visit. Within your YouTube EDU account, you can configure the filters and settings in order to limit video access. FortiGate I Student Guide 524 DO NOT REPRINT © FORTINET Web Filtering (slide contains animations) Static URL filtering is another web filter feature. Similar to static domain filter, configured URLs in the URL filter are checked against the visited websites. If a match is found, the configured action is taken. URL filtering has the same patterns as static domain filtering: simple, wildcard, and regular expressions. Let’s see an example of how it works. (click) When a user visits a website, FortiGate looks at the URL list for a matching entry. In this example, the website matches the third entry in the table, which is set up as type Simple. This type means that the match must be exact—there is no option for a partial match with this pattern. Also, the action is set up to Block, thus FortiGate will display a block page message. FortiGate I Student Guide 525 DO NOT REPRINT © FORTINET Web Filtering You can also control web content in the web filter profile by blocking access to webpages containing specific words or patterns. This helps to prevent access to pages with questionable material. You can also add words, phrases, patterns, wildcards, and Perl regular expressions to match content on webpages. This feature is configured per web filter profile, not at the global level. So it is possible to add multiple web content filter lists and then select the best list for each web filter profile. The system administrator can specify banned words and phrases and attach a numerical value, or score, to the importance of those words and phrases. When the web content filter scan detects banned content, it adds the scores of banned words and phrases in the page. If the sum is higher than a threshold set in the web filter profile, FortiGate blocks the page. The maximum number of web content patterns in a list is 5000. FortiGate I Student Guide 526 DO NOT REPRINT © FORTINET Web Filtering You can use the advanced web filtering settings to improve the web filter. The rating options are: 1. If a rating error occurs from the FortiGuard Web Filter service, users will have full unfiltered access to all websites (error-allow) 2. Rate URLs by domain and IP Address. This option sends both the URL and the IP address of the requested site for checking, providing additional security against attempts to bypass the FortiGuard system (rate-server-ip) 3. Block HTTP redirect to avoid websites designed to circumvent web filtering. 4. Rate images by URL. This option replaces blocked images with blanks, even if they are part of a site in an allowed category (rate-image-urls) FortiGate I Student Guide 527 DO NOT REPRINT © FORTINET Web Filtering The advanced proxy option settings for web filtering are: 1. Block access to some Google accounts and services. You can include an exception list. 2. FortiGate displays its own replacement message for 400 and 500-series HTTP errors. If the server error is allowed through, some sites can use these common error pages to circumvent web filtering. 3. Filter Cookies, Java Applets, and ActiveX scripts from web traffic. 4. HTTP POST is the command used by your browser when you send information, so you can limit users from sending information and files to websites. The allow option prevents a server time-out when scanning or when other filtering processes are performed for outgoing traffic. FortiGate I Student Guide 528 DO NOT REPRINT © FORTINET Web Filtering Finally, let’s examine how to monitor the web filtering features and troubleshoot any issues. FortiGate I Student Guide 529 DO NOT REPRINT © FORTINET Web Filtering Remember that the web filtering profile has several features. So if you have enabled many of them, the inspection order flows as follow: 1. The local static URL filter 2. FortiGuard category filtering (to determine a rating) 3. Advanced filters (such as safe search or removing Active X components) For each step, if there is no match, FortiGate will move on to the next check enabled. FortiGate I Student Guide 530 DO NOT REPRINT © FORTINET Web Filtering You have configured your security profiles, but they are not performing web or DNS inspection. Why? Check to see if you have applied the security profiles to your firewall policies. FortiGate I Student Guide 531 DO NOT REPRINT © FORTINET Web Filtering Category-based filtering requires a live connection. You can verify the connection to FortiGuard servers by running the diagnose debug rating CLI command. This displays a list of FortiGuard IP gateways you can connect to, including the following information: • • • • • • Weight: Based on the difference in time zone between the FortiGate and this server (modified by traffic) RTT: Return Trip Time Flags: D (IP returned from DNS), I (Contract server contacted), T (being timed), F (failed) TZ: Server time zone Curr Lost: Current number of consecutive lost packets (in a row, resets to 0 when one packet succeeds) Total Lost: Total number of lost packets The list is of variable length depending on the FortiGuard Distribution Network, but it displays approximately 10 IPs. FortiGate I Student Guide 532 DO NOT REPRINT © FORTINET Web Filtering Now let’s take a look at the web filter log and report feature. This is an example of a log message. Access details include information about the FortiGuard quota and category (if those are enabled), which web filter profile was used to inspect the traffic, the URL, and more details about the event. You can also view the raw log data by selecting the download raw log button at the top of the GUI. The file downloaded is a plain text file in a syslog format. FortiGate I Student Guide 533 DO NOT REPRINT © FORTINET Web Filtering To review, these are the topics that we just talked about: • • • • • • • • • • • • • Web and DNS filtering overview Static URL and domain filtering Forcing safe search FortiGuard category filter FortiGuard quotas Fortinet bar Website rating submissions FortiGuard and static filtering actions Website rating overrides Custom categories HTTP inspection order Web profile overrides Basic HTTPS scanning FortiGate I Student Guide 534 DO NOT REPRINT © FORTINET Application Control In this lesson, you will learn how to monitor and control network applications that may use standard or non-standard protocols and ports – beyond simply blocking or allowing a protocol, port number, or IP address. FortiGate I Student Guide 535 DO NOT REPRINT © FORTINET Application Control After completing this lesson, you should have these practical skills to apply application control, keep it up-to-date, and monitor what applications are being used on your network. FortiGate I Student Guide 536 DO NOT REPRINT © FORTINET Application Control Application control detects applications – often, ones that consume more bandwidth – and allows you to take appropriate actions related to application traffic, such as monitoring, blocking, or applying traffic shaping. A particular application, such as Google Talk, is identified by matching known patterns to the application’s transmission patterns. So, obviously, an application can only be accurately identified if its transmission pattern is unique somehow. However, not every application behaves in a unique way. Many re-use pre-existing, standard protocols and communications methods. For example, many video games such as World of Warcraft now use the BitTorrent protocol to distribute game patches. Application control can be configured in proxy-based and flow-based virtual domains, but inspection is always flow-based because it uses the IPS engine which is flow-based inspection. By comparison, when applying web filtering and antivirus through an HTTP proxy, the proxy first parses HTTP and removes the protocol, and then scans only the payload inside. Why does FortiGate use a flow-based scan for application control? Unlike other forms of security profiles, such as web filtering or antivirus, application control is not applied by a proxy. It uses an IPS engine to analyze network traffic and detect application traffic, even if the application is using standard or non-standard protocols and ports. It doesn’t operate using builtin protocol states. It matches patterns in the entire byte stream of the packet, and then looks for patterns. FortiGate I Student Guide 537 DO NOT REPRINT © FORTINET Application Control When HTTP and other protocols were designed, they were designed to be easy to trace. In that way, administrators could easily give access to single servers behind NAT devices, such as routers and, later, firewalls. But when P2P applications were designed, they had to be able to work without assistance – or cooperation – from network administrators. In order to achieve this, the designers made P2P applications able to bypass firewalls and incredibly hard to detect. Port randomization, pinholes, and changing encryption patterns are some of the techniques that P2P protocols use. These techniques make P2P applications difficult to block using a firewall policy, and also make them difficult to detect by proxy-based inspection. Flow-based inspection using the IPS engine can analyze packets for pattern matching and then look for patterns to detect P2P applications. FortiGate I Student Guide 538 DO NOT REPRINT © FORTINET Application Control Here is a traditional, client-server architecture. There may be many clients of popular sites, but often, such as with an office file server, it’s just one client and one server. Traditional downloads use a defined protocol over a standard port number. Whether it’s from a web or FTP site, the download is from a single IP address, to a single IP address. So blocking this kind of traffic is easy: you only need one firewall policy. But it’s more difficult for peer-to-peer downloads. Why? FortiGate I Student Guide 539 DO NOT REPRINT © FORTINET Application Control P2P downloads divide each file among multiple (theoretically unlimited) peers. Each peer delivers part of the file. While having many clients is a disadvantage in client-server architectures, it is an advantage for P2P architecture because, as the number of peers increases to n, the file is delivered n times faster. Because popularity increases the speed of delivery – unlike traditional client-server architecture, where popularity could effectively cause a denial of service attack on the server – some software, such as BitTorrent distributions of Linux, and games distributing new patches, leverage this advantage. Even if each client has little bandwidth, together, they can offer more bandwidth for the download than many powerful servers. Conversely, in order to download the file, the requesting peer can consume much more bandwidth per second than it would from only a single server. Even if there is only one peer on your network, it can consume unusually large amounts of bandwidth. As the protocols are usually evasive, and there will be many sessions to many peers, they are difficult to completely block. FortiGate I Student Guide 540 DO NOT REPRINT © FORTINET Application Control Before you try to control applications, it’s important to understand the signatures used by application control. How does application control detect the newest applications and changes to application protocols? Because application control uses an IPS engine, FortiGuard updates are crucial. You can configure your FortiGate to automatically update its IPS & Application Control signature database under the FortiGuard page. It also shows the current version of IPS definitions and engine. You can also manually trigger the database update by clicking Update AV & IPS Definitions. FortiGate I Student Guide 541 DO NOT REPRINT © FORTINET Application Control You can view the latest application control database version from the FortiGuard website http://www.fortiguard.com, or by clicking View Application Signatures in the application control profile. The application control database provides the details about application control signatures based on category, technology, and risk to name a few. When building an application control signature, the FortiGuard security research team evaluates the application and assigns a risk level. The assigned risk level is based on the type of security risk. The rating is Fortinet-specific, and not related to Common Vulnerability Scoring System (CVSS) or other external systems. If you aren’t aware of the specific application, this information can help you to decide if it would be wise to block an application or not. On the FortiGuard website, you can read details about each signature’s related application. Let’s look at an example. In the slide, you can see an example article for Ultrasurf_9.6+. Ultrasurf_9.6+ is a web proxy, so it falls in the proxy category. If there are any special requirements for scanning or blocking the application, the article provides some advice. It is always wise to make test policies and use them to observe the behavior first. If there are new applications that you need to control, and the latest update includes definitions for them, you can go to the FortiGuard website and submit a request to have the new applications added. FortiGate I Student Guide 542 DO NOT REPRINT © FORTINET Application Control Now you know what application control is and how it works. In this section, you will learn how to configure an application control profile to match traffic with applications and take appropriate action. FortiGate I Student Guide 543 DO NOT REPRINT © FORTINET Application Control The application control profile consists of three different types of filters: • Categories: It consist of applications that are grouped based on similarity. For example, all applications that are capable of providing remote access are grouped in the Remote Access category. You can view the signatures of all applications in a category or apply an action to the category as a whole. • Application Overrides: It provides the flexibility to control specific signatures and applications. • Filter Overrides: It can be useful when a predefined category does not meet your requirements, and you would like to block all the applications based on criteria that is not available in categories. You can configure the categorization of applications based on behaviour, popularity, protocol, risk, vendor, and/or the technology used by the applications, and take action based on that. FortiGate I Student Guide 544 DO NOT REPRINT © FORTINET Application Control The application control profile is configured from the Application Control page. You can configure actions based on categories, application overrides, and filter overrides. You can also view the list of application control signatures by clicking View Application Signatures. Unknown Applications matches traffic that could not be matched to any application control signature and identifies the traffic as Unknown Application in the logs. Whether or not traffic is identified as Unknown Application depends on: • • how many rare applications your users have, and which IPS database version you are using. Identifying traffic as unknown might cause many log entries—and frequent log entries decrease performance. If you choose to enable Allow and Log DNS Traffic, be aware that you should only do it for short periods, such as during an investigation. So, depending on the application, and how often it queries DNS servers, this can use significant system resources. Replacement Messages for HTTP-based Applications allows you to replace blocked content with an explanation (for the user’s benefit). With non-HTTP/HTTPS applications, however, you can only drop the packets or reset the TCP connection. Once you’ve configured the application control profile, select the sensor in the firewall policy. Like any other security profile, these settings are not global. FortiGate will only apply them to traffic governed by the firewall policy where you’ve selected an application control profile. This allows granular control. FortiGate I Student Guide 545 DO NOT REPRINT © FORTINET Application Control The IPS engine examines the traffic stream for a signature match. Then, FortiGate scans packets for matches in this specific order, for the application control profile: 1. Application Overrides: If you have configured any Application Overrides, the application control profile considers those first. It looks for a matching override starting at the top of the list, like firewall policies. 2. Filter Overrides: If no matching application override exists, then the application control profile applies the action based on configured Filter Overrides. 3. Categories. Finally, the application control profile applies the action that you’ve configured for applications in your selected Categories. It is also worth mentioning that multiple overrides for the same signature cannot be created. FortiGate I Student Guide 546 DO NOT REPRINT © FORTINET Application Control For each filter in the application control profile, you must indicate an Action – what FortiGate does when traffic matches. • • • • Allow – Simply passes the traffic and does not generate a log. Monitor – Passes the traffic, but also generates a log message. Block – Drops the detected traffic and generates a log message. Quarantine – Blocks the traffic from an attacker IP until expiration time has been reached. It also generates a log message. The View Signature only allows you to view signatures from a particular category and is not a configurable action. Which is the correct action to select? If you’re not sure which action to choose, Monitor can be useful initially, while you study your network. Once you have taken some time to study your network traffic, you can later fine-tune your filter selection by choosing the most appropriate action. It also depends on the application. If an application requires feedback to prevent instability or other unwanted behavior, then you might use Quarantine instead of Block. Otherwise, the most efficient use of FortiGate resources to simply to block. FortiGate I Student Guide 547 DO NOT REPRINT © FORTINET Application Control In this example profile, application control blocks the Game and Video/Audio categories. For applications in these categories, FortiGate responds with application control’s HTTP block message. (It is slightly different than web filtering’s HTTP block message.) All other categories are set to monitor, and are allowed to pass traffic. In the section Application Overrides, you can see that some exceptions are specified. Instead of being set to block, Battle.Net (Game) and Dailymotion (Video/Audio) are set to monitor. Because application overrides are applied first in the scan, these two applications will be allowed, and will generate logs. Next, the scan will check for Filter Overrides. Because a filter override is configured to block applications that use excessive bandwidth, it will block all applications using excessive bandwidth, regardless of any categories that allow these applications. Here is an example of how several UTM features could work together, overlap, or work as substitutes, on the same traffic. After the application control scan is done, FortiGate begins other scans, such as web filtering. This scan could block Battle.Net and Dailymotion, but it would use its own block message. Also, web filtering doesn’t check the list of application control overrides. So even if an application control override allows an application, web filtering could still block it. Similarly, static URL filtering has its own exempt action, which bypasses all subsequent security checks. However, application control occurs before web filtering, so that web filtering exemption cannot bypass application control. FortiGate I Student Guide 548 DO NOT REPRINT © FORTINET Application Control For HTTP-based applications, application control can provide feedback to the user about why their application was blocked. This is called a block page, and it is similar to the one you can configure for URLs that you block through FortiGuard web filtering. It is also worth mentioning that, if deep inspection is enabled in the firewall policy, all HTTPS-based applications will also provide this block page. The block page contains this information: • • • • • • • • the signature that detected the application (in this case, BitTorrent) the signature’s category (P2P) the URL that was specifically blocked (in this case, the index page of bittorrent.com), since a web page can be assembled from multiple URLs the client’s source IP (10.0.1.10) the server’s destination IP (20.x.x.x) user name (if authentication is enabled) the UUID of the policy governing the traffic the FortiGate’s host name The last two pieces of information listed can help you to determine which FortiGate blocked the page, even if you have a large network with many FortiGates securing different segments. FortiGate I Student Guide 549 DO NOT REPRINT © FORTINET Application Control If an application is necessary, but you need to prevent it from impacting bandwidth, then instead of blocking it entirely, you can apply a rate limit to the application. For example, you can rate limit applications used for storage or backup leaving enough bandwidth for more sensitive streaming applications, such as video conferencing. Applying traffic shaping to applications is very useful when you’re trying to limit traffic that uses the same TCP or UDP port numbers as mission-critical applications. Some high-traffic web sites, such as YouTube, can be throttled in this way. Let’s examine the details of how throttling works. Not all URL requests to www.youtube.com are for video. Your browser makes several HTTPS requests for: • the web page itself • images • scripts and style sheets • video All of these items have separate URLs. If you analyze a site like YouTube, the web pages themselves don’t use much bandwidth; it is the video content that uses the most bandwidth. But, since all content is transported using the same protocol (HTTPS), and the URLs contain dynamically generated alphanumeric strings, traditional firewall policies can't block or throttle the traffic by port number or protocol, because they are the same. Using application control, you can rate limit only videos. Doing this prevents users from saturating your network bandwidth while still allowing them to access the other content on the site, such as for comments or sharing links. FortiGate I Student Guide 550 DO NOT REPRINT © FORTINET Application Control You can limit the bandwidth of an application category or specific application by configuring a traffic shaping policy. Starting in FortiOS 5.4, you can also apply traffic shaping to FortiGuard web filter categories. You must ensure that the matching criteria aligns with the firewall policy or policies to which you want to apply shaping. It does not have to match outright. For example, if the source in the firewall policy is set to all (0.0.0.0/0.0.0.0), the source in the traffic shaping policy can be set to any source that is included in all, for example, STUDENT_INTERNAL (10.0.1.0/24). If the traffic shaping policy is not visible in the GUI, you can enable it through the Feature Select page. Note that the outgoing interface is usually the egress interface (WAN). The Shared Shaper is applied to ingress-to-egress traffic, which is useful for restricting bandwidth for uploading. The Reverse Shaper is also a shared shaper, but it is applied to traffic in the reverse direction (egress-to-ingress traffic). This is useful for restricting bandwidth for downloading or streaming, because it limits the bandwidth from the external interface to the internal interface. There are two types of shapers that can be configured from the Traffic Shaping Policy page, and you can apply them in the traffic shaping policy. • Shared Shaper: A shared shaper applies a total bandwidth to all traffic using that shaper. The scope can be per-policy or for all policies referencing that shaper. • Per-IP Shaper: A per-IP shaper allows you to apply traffic shaping to all source IP addresses in the security policy, and bandwidth is equally divided among the group. FortiGate I Student Guide 551 DO NOT REPRINT © FORTINET Application Control Starting in FortiOS 5.4, all cloud-based applications are grouped under a Cloud Access Security Inspection (CASI) profile, which allows fine-grained control over cloud applications, such as YouTube, Dropbox, and Netflix, to name a few. You can configure a new CASI profile or edit an existing CASI profile under the Security Profiles menu. However, if the CASI profile is not visible in the GUI, you can enable it from the Feature Select page. The CASI profile can be configured in proxy-based and flow-based virtual domains, but inspection is always flow-based, because it uses an IPS engine (the same as the application control profile). Note that it requires a subscription to FortiGuard IPS and Application Control. Many applications are switching to HTTPS-only, so remember that for those, you will also need an SSL/SSH inspection profile. When applying a CASI profile to a firewall policy, enable deep inspection (full SSL/SSH inspection) in the firewall policy as CASI is basically doing deep inspection of cloud applications. For the selected cloud application, you can configure an individual action on each feature: • • • Allow: Pass the traffic and do not log. Monitor: Pass the traffic and generate a log. Block: Block the traffic and generate a log. FortiGate I Student Guide 552 DO NOT REPRINT © FORTINET Application Control If you have logging enabled, you can use it to discover which applications are being used on your network, and see details about them through the Log & Report menu. In the example, application control detected a client attempting to access BitTorrent. The configured action was to monitor the traffic. We know this because the Action field indicates pass, so we know FortiGate didn’t block the traffic. But, the action wasn’t to simply allow the traffic without logging, either, which we know because the log message exists. You can view the details of the log message by clicking its log entry. The log entry provides detailed information, such as the application category, application sensor name, action, and policy ID, to name a few. You can also view the details through the Forward Traffic logs. This is where firewall policies record activity. You’ll also find a summary of the traffic to which FortiGate applied application control. Again, this is because application control is applied by a firewall policy. To find out which policy applied application control, you can review either the Policy ID or the Policy UUID fields of this log message. What if you need to find out which application is using most of the bandwidth during certain hours of the day? FortiGate I Student Guide 553 DO NOT REPRINT © FORTINET Application Control Under the FortiView menu, the Applications page provides details of each application, such as the application name, category, and bandwidth. You can drilldown further to see more granular details by right-clicking the application and clicking Drill Down to Details. This view provides information about sources, destinations, policies, or sessions for that selected application. FortiGate I Student Guide 554 DO NOT REPRINT © FORTINET Application Control To review, we discussed the following topics: • • • • • • • • • How application control identifies traffic Why some traffic, especially peer-to-peer, is hard to block without application control FortiGuard’s five-point rating system for application control signatures How to submit requests for additional applications How to configure an application control profile The order of operations for the application control and IPS engine processes When to shape traffic How to configure CASI How to read logs to discover which applications have been detected, and which action FortiGate applied FortiGate I Student Guide 555
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : Fortinet Training Services Create Date : 2016:08:04 10:16:31-04:00 Keywords : FortiGate, NSE 4, Fortinet Modify Date : 2016:08:04 13:46:38-04:00 Subject : FortiGate 5.4.1 Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Fortinet Training Services Description : FortiGate 5.4.1 Title : FortiGate I Student Guide Creator Tool : Adobe Acrobat 9.0.0 Metadata Date : 2016:08:04 13:46:38-04:00 Producer : Adobe Acrobat 9.0.0 Document ID : uuid:68dae7ed-0d6d-4a8d-bc32-68815bdc0ec3 Instance ID : uuid:70e50096-f787-4509-b6d9-926793929f50 Page Layout : OneColumn Page Mode : UseOutlines Page Count : 556EXIF Metadata provided by EXIF.tools